diff options
Diffstat (limited to 'windows/hdf5build.BAT')
| -rwxr-xr-x | windows/hdf5build.BAT | 303 |
1 files changed, 0 insertions, 303 deletions
diff --git a/windows/hdf5build.BAT b/windows/hdf5build.BAT deleted file mode 100755 index 651ecfb..0000000 --- a/windows/hdf5build.BAT +++ /dev/null @@ -1,303 +0,0 @@ -@echo OFF
-rem Copyright by The HDF Group.
-rem Copyright by the Board of Trustees of the University of Illinois.
-rem All rights reserved.
-rem
-rem This file is part of HDF5. The full HDF5 copyright notice, including
-rem terms governing use, modification, and redistribution, is contained in
-rem the files COPYING and Copyright.html. COPYING can be found at the root
-rem of the source code distribution tree; Copyright.html can be found at the
-rem root level of an installed copy of the electronic HDF5 document set and
-rem is linked from the top-level documents page. It can also be found at
-rem http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-rem access to either file, you may request a copy from helphdfgroup.org.
-
-
-rem File Name: hdf5build.bat
-rem This batch file is used to build HDF5 Libraries and Tools.
-rem This batch file takes the following options:
-rem . /vs9 Build HDF5 using Visual Studio 2008
-rem . /fort Build HDF5 with Fortran libraries
-rem . /ivf101 Build HDF5 Fortran using Intel Visual Fortran 10.1
-rem . /nodebug Note: Default is to build debug and release versions
-rem . /useenv Build HDF5 using compiler settings defined
-rem . in the environment, rather than the IDE.
-rem . /? Help information
-
-rem This batch file makes the following assumptions:
-rem - The appropriate version of Visual Studio is installed and setup
-rem - The directory structure is setup from a fresh source copy
-rem - copy_hdf.bat has already been run from the ./windows directory
-rem - Visual Studio already contains the required paths for external libraries
-rem - szip and zlib DLLs are already placed in an accessible directory
-rem - hdf5_ext_szip or hdf5_ext_zlib have been set accordingly
-rem - if building with the /useenv option, szip and zlib paths have been added
-rem to %include% and %libpath% as necessary.
-rem - The target platform architecture is specified in the environment
-rem variable PROCESSOR_ARCHITECTURE
-
-rem By default, only C and C++ libraries are built.
-
-setlocal enabledelayedexpansion
-pushd %~dp0
-
-set nerrors=0
-if "%1"=="/?" goto help
-set blddebug=debug
-set bldrelease=release
-goto main
-
-rem Print a help message
-:help
-
- echo.Builds HDF5 Libraries and Tools.
- echo.
- echo.Usage: %~nx0 [OPTION]
- echo.
- echo. /vs9 Build HDF5 using Visual Studio 2008
- echo. /fort Build HDF5 with Fortran libraries
- echo. /ivf101 Build HDF5 Fortran using Intel Visual Fortran 10.1
- echo. /nodebug Note: Default is to build debug and release versions
- echo. /useenv Build HDF5 using compiler settings defined
- echo. in the environment, rather than the IDE.
- echo. /? Help information
-
- exit /b 0
-
-
-rem Parse through the parameters sent to file, and set appropriate variables
-:parse_params
-
- for %%a in (%*) do (
- if "%%a"=="/vs9" (
- rem Use Visual Studio .NET 2003
- set hdf5_vs2008=true
-
- ) else if "%%a"=="/fort" (
- rem Enable Fortran
- set hdf5_enablefortran=true
-
- ) else if "%%a"=="/ivf101" (
- rem Enable Fortran
- set hdf5_ivf101=true
-
- ) else if "%%a"=="/nodebug" (
- rem Enable Fortran
- set blddebug=
-
- ) else if "%%a"=="/useenv" (
- rem Pass /useenv flag to devenv
- set hdf5_useenv=true
-
- ) else if "%%a"=="/?" (
- rem Set errorlevel 1 and send to help
- call :help
- exit /b 1
-
- ) else (
- rem Set errorlevel 2 to send to help if we receive a bad parameter
- echo.Unknown option: %%a
- call :help
- exit /b 2
- )
- )
-
- exit /b 0
-
-
-rem Setup our environment
-:setup
-
- rem Constants
-
- echo.Setting up environment
-
- rem Make sure /vs10 and /vs9 weren't specified together
- rem if "%hdf5_vs2010%%hdf5_vs2008%"=="truetrue" (
- rem echo.Error: /vs10 and /vs9 should not be specified together.
- rem exit /b 1
- rem )
-
- rem Figure out which solution file to use based on configuration
- if defined hdf5_vs2008 (
- echo.Using Visual Studio 2008
- if defined hdf5_enablefortran (
- echo.Building Fortran projects enabled
- set hdf5_sln="%CD%\windows\proj\all_fortran\all_fortran.sln"
- ) else (
- set hdf5_sln="%CD%\windows\proj\all\all.sln"
- )
-
- )
-
-
- rem Make sure PROCESSOR_ARCHITECURE is set to either x86 or AMD64
- if "%PROCESSOR_ARCHITECTURE%"=="x86" (
- set hdf5_platform=Win32
- ) else if "%PROCESSOR_ARCHITECTURE%"=="AMD64" (
- set hdf5_platform=x64
- ) else (
- echo.Error: Environment variable PROCESSOR_ARCHITECTURE should contain
- echo.either x86 or AMD64
- exit /b 1
- )
-
- rem Setup Visual Studio environment. By default, use the Visual Studio
- rem 2005 environment.
-
- set ccflags=
-
- if defined hdf5_vs2008 (
- if not defined hdf5_enablefortran (
- if defined vs90comntools (
- rem This sets the Visual Studio 2008 path and environment variables
- if %hdf5_platform%==Win32 (
- call "%vs90comntools%\..\..\VC\vcvarsall.bat" x86
- ) else (
- call "%vs90comntools%\..\..\VC\vcvarsall.bat" x86_amd64
- )
-
- ) else (
- echo.Error: Cannot setup Visual Studio 2008 environment. Please
- echo.make sure VS90COMNTOOLS is defined in the environment.
- exit /b 1
- )
-
- ) else (
- echo.with Intel Visual Fortran 10.1
-
- if defined ifort_compiler10 (
- rem This sets the Intel Fortran 10.1 environment, as well as
- rem setting the appropriate Visual Studio environment
-
- if %hdf5_platform%==Win32 (
- call "%ifort_compiler10%\IA32\Bin\ifortvars.bat"
- ) else (
- call "%ifort_compiler10%\em64t\Bin\ifortvars.bat"
- )
- ) else (
- echo.Error: Cannot setup Intel Fortran 10.1 environment. Please
- echo.make sure IFORT_COMPILER10 is defined in the environment.
- exit /b 1
- )
- )
-
- )
-
- if defined hdf5_useenv (
- rem This will tell Visual Studio to use include, library, etc. paths
- rem defined by %INCLUDE% %LIBPATH%, etc. Assume the user has already
- rem added external library paths to these variables.
- set ccflags=%ccflags% /useenv
- )
-
- exit /b 0
-
-
-rem Upgrade the project files to the latest format for Visual Studio
-:upgrade
-
- echo.Upgrading project files
- devenv %hdf5_sln% /Upgrade /NoLogo
-
- exit /b
-
-
-rem Build the HDF5 libraries. By default, C and C++ libraries are built.
-:all
-
- echo.Building HDF5
-
- echo.*****************************************************************************
- echo. Build HDF5 Library and Tools
- echo.*****************************************************************************
- echo.
-
- rem Build both debug and release versions
- for %%a in (%blddebug% %bldrelease%) DO (
- echo.Building %hdf5_platform% %%a libraries...
- devenv %hdf5_sln% %ccflags% /rebuild "%%a|%hdf5_platform%"
- if not errorlevel 0 (
- set /a nerrors=!nerrors!+1
- echo. Building %%a FAILED
- exit /b 1
- ) else if errorlevel 1 (
- set /a nerrors=!nerrors!+1
- echo. Building %%a FAILED
- exit /b 1
- )
- )
-
- exit /b
-
-
-rem Handle errors
-:error
-
- rem For now, our error handling consists of setting nerrors and quitting
- echo.HDF5 build failed.
- set /a nerrors=%nerrors%+1
- goto end
-
- rem We'll never really get here, but we keep this line for consistency.
- exit /b
-
-
-rem This is where the magic happens
-:main
-
- call :parse_params %*
- if not errorlevel 0 (
- if errorlevel 1 (
- rem This isn't an error case-- this means /? was specified. Simply
- rem quit.
- goto end
-
- ) else (
- rem Error case.
- echo.Error parsing parameters!
- goto error
- )
- )
-
- call :setup
- if not errorlevel 0 (
- echo.Error setting up build environment.
- goto error
- )
-
- rem Upgrade the project files if needed
- if defined hdf5_vs2008 (
- call :upgrade
- if not errorlevel 0 (
- echo.Error upgrading project files!
- goto error
- )
- )
-
- echo.Building HDF5 Libraries and Tools
- echo.
-
- echo.*****************************************************************************
- echo. Build HDF5 Libraries and Tools
- echo.*****************************************************************************
- echo.
-
-
- call :all
- if not errorlevel 0 (
- echo.Error building HDF5 libraries!
- goto error
- ) else if errorlevel 1 (
- echo.Error building HDF5 libraries!
- goto error
- )
-
- if "%nerrors%"=="0" (
- echo. All HDF5 libraries and tools build successfully!
- )
- rem Fall through to end
-
-:end
- popd
- endlocal & exit /b %nerrors%
|