diff options
Diffstat (limited to 'windows/tools/dumptest.bat')
| -rwxr-xr-x | windows/tools/dumptest.bat | 710 |
1 files changed, 0 insertions, 710 deletions
diff --git a/windows/tools/dumptest.bat b/windows/tools/dumptest.bat deleted file mode 100755 index 3af0558..0000000 --- a/windows/tools/dumptest.bat +++ /dev/null @@ -1,710 +0,0 @@ -@REM Copyright by The HDF Group.
-@REM Copyright by the Board of Trustees of the University of Illinois.
-@REM All rights reserved.
-@REM
-@REM This file is part of HDF5. The full HDF5 copyright notice, including
-@REM terms governing use, modification, and redistribution, is contained in
-@REM the files COPYING and Copyright.html. COPYING can be found at the root
-@REM of the source code distribution tree; Copyright.html can be found at the
-@REM root level of an installed copy of the electronic HDF5 document set and
-@REM is linked from the top-level documents page. It can also be found at
-@REM http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-@REM access to either file, you may request a copy from help@hdfgroup.org.
-
-@echo off
-
-::This batch file is for h5dump general and xml tests.
-::Usage
-:: dumptest release -- release static version
-:: dumptest debug -- debug static version
-:: dumptest release dll -- release dll version
-:: dumptest debug dll -- debug dll version
-:: Written By: Fang GUO
-:: Date : Jan. 12, 2006
-
-
-:: Track total number of testing errors
- set /A totalerr=0
- set /A totalskip=0
-
-
-::*******************************************************
-:: Generate a new temp directory for test h5dump
-::*******************************************************
- :: Make a temporary directory for h5dump test
- mkdir temptest
-
-::******************************************************************
-:: Set the Environment Variables & Change Dir to Dir with h5dump.EXE
-::******************************************************************
-
- :: The first incoming parameter should be configuration (debug or release)
- set p1=%1
- :: The second parameter should be the types of library (dll or blank)
- set p2=%2
-
- :: Before comparison between expected file and the actual outputfile,
- :: Ignore the first line in actual outputfile and the first four lines
- :: in the expected output file
-
- set ln=1
- set ln_exp=4
-
- :: Save the tests output into a temporary file
- set tempResults=dumptest%2_%1.txt
- type nul > %tempResults%
-
- :: Define the .exe file based on the second parameter
- set exefile=h5dump%p2%
-
- :: For convenience, set a variable for the sub batch file
- set tooltest=..\..\tooltest
-
- :: For convenience, set variable for all testfiles/*.h5 files
- for %%i in (testfiles\t*.h5) do set %%~ni=..\..\%%i
-
- :: Special cases: the following are not .h5 files but needed in the tests
- for %%i in (tsplit_file tmulti) do (
- set %%i=..\..\testfiles\%%i
- )
-
- :: Havn't find a way to use % inside a variable name
- set tfamily05d=..\..\testfiles\tfamily%%05d.h5
-
- :: Change the directory to dir including .exe file
- cd h5dump%p2%\%p1%
-
-::Test h5dump with different options
-
-echo.****************************************************
-echo. h5dump%2 %1 T E S T S
-echo.****************************************************
-
-::--------------------------
-::test for displaying groups
-::--------------------------
-set flag=%tgroup%
-call %tooltest% tgroup-1.ddl
-
-::---------------------------------------
-::test for displaying the selected groups
-::---------------------------------------
-set flag=--group=/g2 --group / -g /y %tgroup%
-call %tooltest% tgroup-2.ddl
-
-:: -----------------------------------------
-:: test for displaying simple space datasets
-::------------------------------------------
-set flag=%tdset%
-call %tooltest% tdset-1.ddl
-
-::--------------------------------------
-::test for displaying selected datasets
-::--------------------------------------
-set flag=-H -d dset1 -d /dset2 --dataset=dset3 %tdset%
-call %tooltest% tdset-2.ddl
-
-::------------------------------
-::test for displaying attributes
-::------------------------------
-set flag=%tattr%
-call %tooltest% tattr-1.ddl
-
-::---------------------------------------------------------------------------
-::test for displaying the selected attributes of string type and scalar space
-::---------------------------------------------------------------------------
-set flag=-a /attr1 --attribute /attr4 --attribute=/attr5 %tattr%
-call %tooltest% tattr-2.ddl
-
-::----------------------------------
-::test for header and error messages
-::----------------------------------
-set flag=--header -a /attr2 --attribute=/attr %tattr%
-call %tooltest% tattr-3.ddl
-
-::-----------------------------------------------------------------------------
-::test for displaying attributes in shared datatype (also in group and dataset)
-::-----------------------------------------------------------------------------
-set flag=%tnamed_dtype_attr%
-call %tooltest% tnamed_dtype_attr.ddl
-
-::------------------------------
-::test for displaying soft links
-::------------------------------
-set flag=%tslink%
-call %tooltest% tslink-1.ddl
-
-set flag=%tudlink%
-call %tooltest% tudlink-1.ddl
-::-------------------------------------
-::test for displaying the selected link
-::-------------------------------------
-set flag=-l slink2 %tslink%
-call %tooltest% tslink-2.ddl
-
-set flag=-l udlink2 %tudlink%
-call %tooltest% tudlink-2.ddl
-
-::--------------------
-::tests for hard links
-::--------------------
-set flag=%thlink%
-call %tooltest% thlink-1.ddl
-
-set flag=-d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 %thlink%
-call %tooltest% thlink-2.ddl
-
-set flag=-d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 %thlink%
-call %tooltest% thlink-3.ddl
-
-set flag=-g /g1 %thlink%
-call %tooltest% thlink-4.ddl
-
-set flag=-d /dset1 -g /g2 -d /g1/dset2 %thlink%
-call %tooltest% thlink-5.ddl
-
-::-----------------------------
-::tests for compound data types
-::-----------------------------
-set flag=%tcompound%
-call %tooltest% tcomp-1.ddl
-
-::-------------------------
-::test for named data types
-::-------------------------
-set flag=-t /type1 --datatype /type2 --datatype=/group1/type3 %tcompound%
-call %tooltest% tcomp-2.ddl
-
-::--------------------
-::test for unamed type
-::--------------------
-set flag=-t /#6632:0 -g /group2 %tcompound%
-call %tooltest% tcomp-3.ddl
-
-::----------------------------------
-::test complicated compound datatype
-::----------------------------------
-set flag=%tcompound_complex%
-call %tooltest% tcomp-4.ddl
-
-::---------------------------------
-::test for the nested compound type
-::---------------------------------
-set flag=%tnestedcomp%
-call %tooltest% tnestcomp-1.ddl
-
-::----------------
-::test for options
-::----------------
-set flag=%tall%
-call %tooltest% tall-1.ddl
-
-set flag=--header -g /g1/g1.1 -a attr2 %tall%
-call %tooltest% tall-2.ddl
-
-set flag=-d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink %tall%
-call %tooltest% tall-3.ddl
-
-::------------------------
-::test for loop detection
-::------------------------
-set flag=%tloop%
-call %tooltest% tloop-1.ddl
-
-::---------------
-::test for string
-::---------------
-set flag=%tstr%
-call %tooltest% tstr-1.ddl
-
-set flag=%tstr2%
-call %tooltest% tstr-2.ddl
-
-::-------------------------------------
-::test for file created by Lib SAF team
-::-------------------------------------
-set flag=%tsaf%
-call %tooltest% tsaf.ddl
-
-::---------------------------------------
-::test for file with variable length data
-::---------------------------------------
-set tvldtypes=..\..\testfiles\tvldtypes
-for %%v in (1 2 3 4 5) do (
-set flag=%tvldtypes%%%v.h5
-call %tooltest% tvldtypes%%v.ddl
-)
-set tvldtypes=
-
-::----------------------------------------------
-::test for file with variable length string data
-::----------------------------------------------
-set flag=%tvlstr%
-call %tooltest% tvlstr.ddl
-
-::------------------------------
-::test for files with array data
-::------------------------------
-set tarray=..\..\testfiles\tarray
-for /L %%v in (1,1,7) do (
-set flag=%tarray%%%v%.h5
-call %tooltest% tarray%%v.ddl
-)
-set tarray=
-
-::------------------------------
-::test for files with empty data
-::------------------------------
-set flag=%tempty%
-call %tooltest% tempty.ddl
-
-::---------------------------------------------
-::test for files with groups that have comments
-::---------------------------------------------
-set flag=%tgrp_comments%
-call %tooltest% tgrp_comments.ddl
-
-::---------------------------
-::test the --filedriver flag
-::---------------------------
-set flag=--filedriver=split %tsplit_file%
-call %tooltest% tsplit_file.ddl
-
-::Special: Find a way to echo environment
-set flag=--filedriver=family %tfamily05d%
-call %tooltest% tfamily.ddl
-
-set flag=--filedriver=multi %tmulti%
-call %tooltest% tmulti.ddl
-
-::----------------------------------------------------------------
-::test for files with group names which reach > 1024 bytes in size
-::----------------------------------------------------------------
-set flag=-w157 %tlarge_objname%
-call %tooltest% tlarge_objname.ddl
-
-::-------------------------------------------
-::test '-A' to suppress data but print attr's
-::-------------------------------------------
-set flag=-A %tall%
-call %tooltest% tall-2A.ddl
-
-::---------------------------------------------------------
-::test '-r' to print attributes in ASCII instead of decimal
-::---------------------------------------------------------
-set flag=-A -r %tall%
-call %tooltest% tall-2B.ddl
-
-::---------------
-::test Subsetting
-::---------------
-set flag=--dataset=/g1/g1.1/dset1.1.1 --start=1,1 --stride=2,3 --count=3,2 --block=1,1 %tall%
-call %tooltest% tall-4s.ddl
-
-set flag=-d "/g1/g1.1/dset1.1.2[0;2;10;]" %tall%
-call %tooltest% tall-5s.ddl
-
-set flag=-d "/dset1[1,1;;;]" %tdset%
-call %tooltest% tdset-3s.ddl
-
-::set flag=-d "/dset1[;3,2;4,4;1,4]" %tdset2%
-::call %tooltest% tdset2-1s.ddl
-
-::----------------------------------------------------
-::test printing characters in ASCII instead of decimal
-::----------------------------------------------------
-set flag=-r %tchar%
-call %tooltest% tchar1.ddl
-
-::---------------------
-::test failure handling
-::---------------------
-
-::1. Missing file name
-set flag=
-call %tooltest% tnofilename.ddl
-
-:: rev. 2004
-
-::---------------------
-::tests for super block
-::---------------------
-set flag=-H -B -d dset %tfcontents1%
-call %tooltest% tboot1.ddl
-
-set flag=-B %tfcontents2%
-call %tooltest% tboot2.ddl
-
-::------------------------------------
-:: test -p with a non existing dataset
-::------------------------------------
-set flag=-p -d bogus %tfcontents1%
-call %tooltest% tperror.ddl
-
-::----------------------
-::test for file contents
-::----------------------
-set flag=-n %tfcontents1%
-call %tooltest% tcontents.ddl
-
-::-------------------------
-::tests for storage layout
-::-------------------------
-
-for %%v in (compact chunked external) do (
-set flag=-H -p -d %%v %tfilters%
-call %tooltest% t%%v.ddl
-)
-
-::contiguous (tcontiguos.ddl or tcontiguous.ddl)
-set flag=-H -p -d contiguous %tfilters%
-call %tooltest% tcontiguos.ddl
-
-::-----------
-::fill values
-::-----------
-set flag=-p %tfvalues%
-call %tooltest% tfill.ddl
-
-::-----------------------------------------------
-::several datatype, with references , print path
-::-----------------------------------------------
-set flag=%tattr2%
-call %tooltest% treference.ddl
-
-::------------------------------------------
-::escape/not escape non printable characters
-::------------------------------------------
-set flag=-e %tstr3%
-call %tooltest% tstringe.ddl
-
-set flag=%tstr3%
-call %tooltest% tstring.ddl
-
-::----------------------------------
-::char data as ASCII with non escape
-::----------------------------------
-set flag=-r -d str4 %tstr3%
-call %tooltest% tstring2.ddl
-
-::-----------------------------
-::array indices print/not print
-::-----------------------------
-set flag=%taindices%
-call %tooltest% tindicesyes.ddl
-
-set flag=-y %taindices%
-call %tooltest% tindicesno.ddl
-
-
-::-----------------------------
-::array indices with subsetting
-::-----------------------------
-
-set flag=-d 1d -s 3 -c 40 %taindices%
-call %tooltest% tindicessub1.ddl
-
-set flag=-d 2d -s 1,3 -c 6,4 %taindices%
-call %tooltest% tindicessub2.ddl
-
-set flag=-d 3d -s 0,1,3 -c 2,6,4 %taindices%
-call %tooltest% tindicessub3.ddl
-
-set flag=-d 4d -s 0,0,1,3 -c 2,2,6,4 %taindices%
-call %tooltest% tindicessub4.ddl
-
-::-----------------
-::tests for filters
-::-----------------
-
-:: SZIP
-set flag=-H -p -d szip %tfilters%
-call %tooltest% tszip.ddl szip
-
-::deflate
-set flag=-H -p -d deflate %tfilters%
-call %tooltest% tdeflate.ddl zlib
-
-::shuffle
-set flag=-H -p -d shuffle %tfilters%
-call %tooltest% tshuffle.ddl
-
-::fletcher32
-set flag=-H -p -d fletcher32 %tfilters%
-call %tooltest% tfletcher32.ddl
-
-::nbit
-set flag=-H -p -d nbit %tfilters%
-call %tooltest% tnbit.ddl
-
-::scaleoffset
-set flag=-H -p -d scaleoffset %tfilters%
-call %tooltest% tscaleoffset.ddl
-
-::all
-set flag=-H -p -d all %tfilters%
-call %tooltest% tallfilters.ddl zlib szip
-
-::user defined
-set flag=-H -p -d myfilter %tfilters%
-call %tooltest% tuserfilter.ddl
-
-::test for displaying objects with very long names
-set flag=%tlonglinks%
-call %tooltest% tlonglinks.ddl
-
-::dimensions over 4GB, print boundary
-set flag=-d dset4gb -s 4294967284 -c 22 %tbigdims%
-call %tooltest% tbigdims.ddl
-
-::hyperslab read
-set flag=%thyperslab%
-call %tooltest% thyperslab.ddl
-
-::test for displaying dataset and attribute of null space
-set flag=%tnullspace%
-call %tooltest% tnullspace.ddl
-
-
-::test for long double (Some systems do not have long double)
-set flag=%tldouble%
-call %tooltest% tldouble.ddl SKIP
-
-::Test for vms
-set flag=%tvms%
-call %tooltest% tvms.ddl
-
-
-::test for binary output
-set flag=-d array -o out1.bin -b LE %tbinary%
-call %tooltest% tbin1.ddl
-
-set flag=-d float -o out2.bin -b BE %tbinary%
-call %tooltest% tbin2.ddl
-
-set flag=-d integer -o out3.bin -b MEMORY %tbinary%
-call %tooltest% tbin3.ddl
-
-
-set flag=-d double -o out4.bin -b FILE %tbinary%
-call %tooltest% tbin4.ddl
-
-::test for dataset region references
-set flag=%tdatareg%
-call %tooltest% tregref.ddl
-
-echo.
-echo.****************************************************
-echo. h5dump%2 %1 XML T E S T S
-echo.****************************************************
-
-::test XML
-set flag=--xml %tall%
-call %tooltest% tall.h5.xml
-
-set flag=--xml %tattr%
-call %tooltest% tattr.h5.xml
-
-set flag=--xml %tbitfields%
-call %tooltest% tbitfields.h5.xml
-
-set flag=--xml %tcompound%
-call %tooltest% tcompound.h5.xml
-
-set flag=--xml %tcompound2%
-call %tooltest% tcompound2.h5.xml
-
-set flag=--xml %tdatareg%
-call %tooltest% tdatareg.h5.xml
-
-set flag=--xml %tdset%
-call %tooltest% tdset.h5.xml
-
-set flag=--xml %tdset2%
-call %tooltest% tdset2.h5.xml
-
-set flag=--xml %tenum%
-call %tooltest% tenum.h5.xml
-
-set flag=--xml %tgroup%
-call %tooltest% tgroup.h5.xml
-
-set flag=--xml %thlink%
-call %tooltest% thlink.h5.xml SKIP
-
-set flag=--xml %tloop%
-call %tooltest% tloop.h5.xml
-
-set flag=--xml %tloop2%
-call %tooltest% tloop2.h5.xml
-
-set flag=--xml %tmany%
-call %tooltest% tmany.h5.xml SKIP
-
-set flag=--xml %tnestedcomp%
-call %tooltest% tnestedcomp.h5.xml
-
-set flag=--xml %tcompound_complex%
-call %tooltest% tcompound_complex.h5.xml
-
-set flag=--xml %tobjref%
-call %tooltest% tobjref.h5.xml
-
-set flag=--xml %topaque%
-call %tooltest% topaque.h5.xml
-
-set flag=--xml %tslink%
-call %tooltest% tslink.h5.xml
-
-set flag=--xml %tstr%
-call %tooltest% tstr.h5.xml
-
-set flag=--xml %tstr2%
-call %tooltest% tstr2.h5.xml
-
-set flag=--xml %tref%
-call %tooltest% tref.h5.xml
-
-set flag=--xml %tname-amp%
-call %tooltest% tname-amp.h5.xml
-
-set flag=--xml %tname-apos%
-call %tooltest% tname-apos.h5.xml
-
-set flag=--xml %tname-gt%
-call %tooltest% tname-gt.h5.xml
-
-set flag=--xml %tname-lt%
-call %tooltest% tname-lt.h5.xml
-
-set flag=--xml %tname-quot%
-call %tooltest% tname-quot.h5.xml
-
-set flag=--xml %tname-sp%
-call %tooltest% tname-sp.h5.xml
-
-set flag=--xml %tstring%
-call %tooltest% tstring.h5.xml
-
-set flag=--xml %tstring-at%
-call %tooltest% tstring-at.h5.xml
-
-set flag=--xml %tref-escapes%
-call %tooltest% tref-escapes.h5.xml
-
-set flag=--xml %tref-escapes-at%
-call %tooltest% tref-escapes-at.h5.xml
-
-set flag=--xml %tnodata%
-call %tooltest% tnodata.h5.xml
-
-set flag=--xml %tarray1%
-call %tooltest% tarray1.h5.xml
-
-set flag=--xml %tarray2%
-call %tooltest% tarray2.h5.xml
-
-set flag=--xml %tarray3%
-call %tooltest% tarray3.h5.xml
-
-set flag=--xml %tarray6%
-call %tooltest% tarray6.h5.xml
-
-set flag=--xml %tarray7%
-call %tooltest% tarray7.h5.xml
-
-set flag=--xml %tvldtypes1%
-call %tooltest% tvldtypes1.h5.xml
-
-set flag=--xml %tvldtypes2%
-call %tooltest% tvldtypes2.h5.xml
-
-set flag=--xml %tvldtypes3%
-call %tooltest% tvldtypes3.h5.xml
-
-set flag=--xml %tvldtypes4%
-call %tooltest% tvldtypes4.h5.xml
-
-set flag=--xml %tvldtypes5%
-call %tooltest% tvldtypes5.h5.xml
-
-set flag=--xml %tvlstr%
-call %tooltest% tvlstr.h5.xml
-
-set flag=--xml %tsaf%
-call %tooltest% tsaf.h5.xml
-
-set flag=--xml %tempty%
-call %tooltest% tempty.h5.xml
-
-set flag=--xml %tnamed_dtype_attr%
-call %tooltest% tnamed_dtype_attr.h5.xml
-
-
-::Test dataset and attribute of null space. Commented out:
-::wait until the XML schema is updated for null space.
-set flag=--xml tnulspace.h5
-call %tooltest% tnullspace.h5.xml SKIP
-
-::other options for xml
-
-set flag=--xml --use-dtd %tempty%
-call %tooltest% tempty-dtd.h5.xml
-
-set flag=--xml -u %tempty%
-call %tooltest% tempty-dtd-2.h5.xml
-
-set flag=--xml -X ":" %tempty%
-call %tooltest% tempty-nons.h5.xml
-
-set flag=--xml --xml-ns=":" %tempty%
-call %tooltest% tempty-nons-2.h5.xml
-
-::Some of these combinations are syntactically correct but
-::the URLs are dummies
-
-set flag=--xml -X "thing:" %tempty%
-call %tooltest% tempty-ns.h5.xml
-
-set flag=--xml --xml-ns="thing:" %tempty%
-call %tooltest% tempty-ns-2.h5.xml
-
-set flag=--xml --xml-ns=":" --xml-dtd="http://somewhere.net" %tempty%
-call %tooltest% tempty-nons-uri.h5.xml
-
-set flag=--xml --use-dtd --xml-dtd="http://somewhere.net" %tempty%
-call %tooltest% tempty-dtd-uri.h5.xml
-
-set flag=--xml -A %tall%
-call %tooltest% tall-2A.h5.xml
-
-::------------------
-::End of -xml Tests
-::------------------
-
-cd ..\..
-
-echo.
-if %totalerr%==0 (
-echo. All of the %exefile% %p1% Tests Passed!
-echo. All of the %exefile% %p1% Tests Passed! >> %tempResults%
-) else (
-echo. %exefile% %p1% Tests Finished with %totalerr% Errors!
-echo. %exefile% %p1% Tests Finished with %totalerr% Errors!>> %tempResults%
-)
-
-if not %totalskip%==0 (
-echo. %totalskip% Tests in total Skiped! >> %tempResults%
-echo. %totalskip% Tests in total Skiped!
-echo.
-find "SKIPED" %tempResults% | more +2
-)
-
-rmdir /s/q temptest
-
-for %%i in (testfiles\t*.h5) do set %%~ni=
-set test_szip=
-set output_szip=
-for %%v in (p1 p2 tempResults exefile tooltest ln ln_exp tsplit_file tmulti tfamily05d totalskip) do set %%v=
-for %%i in (tsplit_file tmulti) do set %%i=
-set tfamily05d=
|