diff options
Diffstat (limited to 'windows')
| -rwxr-xr-x | windows/hdf5bt.BAT | 243 | ||||
| -rwxr-xr-x | windows/hdf5build.BAT | 297 |
2 files changed, 296 insertions, 244 deletions
diff --git a/windows/hdf5bt.BAT b/windows/hdf5bt.BAT index cc920dd..26b1e14 100755 --- a/windows/hdf5bt.BAT +++ b/windows/hdf5bt.BAT @@ -1,142 +1,179 @@ -@rem Copyright by The HDF Group.
-@rem Copyright by the Board of Trustees of the University of Illinois.
-@rem All rights reserved.
-@rem
-@rem This file is part of HDF5. The full HDF5 copyright notice, including
-@rem terms governing use, modification, and redistribution, is contained in
-@rem the files COPYING and Copyright.html. COPYING can be found at the root
-@rem of the source code distribution tree; Copyright.html can be found at the
-@rem root level of an installed copy of the electronic HDF5 document set and
-@rem is linked from the top-level documents page. It can also be found at
-@rem http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-@rem access to either file, you may request a copy from help@hdfgroup.org.
-
@echo OFF
-
-:: File Name: hdf5bt.bat
-:: This batch file is used to build and test HDF5 Libraries and Tools.
-:: There are currently only 2 options for this batch file:
-:: hdf5bt /? -- Print a usage message and quit.
-:: hdf5bt -- Build and test HDF5 tools and C/C++ libraries
-:: By Xuan Bai
-:: Created: Aug. 16, 2004
-:: Last Updated: July 6, 2007
-
-:: This batch file makes the following assumptions:
-:: - Visual Studio .NET is installed, and VS71COMNTOOLS variable is set
-:: - The directory structure is setup from a fresh source copy
-:: - copy_hdf.bat has already been run from the ./windows directory
-:: - Visual Studio already contains the required paths for external libraries
-:: - szip and zlib DLLs are already placed in an accessible directory
-:: - If HDF5_EXT_SZIP or HDF5_EXT_ZLIB are not set, then %SZIP_NAME% and %ZLIB_NAME%
-:: will be used, respectively (defined in hdfbuild.BAT)
-
-:: By default, only C and C++ libraries are built and tested.
-
-if "x%1"=="x" goto main
-goto help
-
-:: Print a help message
+rem Copyright by The HDF Group.
+rem Copyright by the Board of Trustees of the University of Illinois.
+rem All rights reserved.
+rem
+rem This file is part of HDF5. The full HDF5 copyright notice, including
+rem terms governing use, modification, and redistribution, is contained in
+rem the files COPYING and Copyright.html. COPYING can be found at the root
+rem of the source code distribution tree; Copyright.html can be found at the
+rem root level of an installed copy of the electronic HDF5 document set and
+rem is linked from the top-level documents page. It can also be found at
+rem http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
+rem access to either file, you may request a copy from help@hdfgroup.org.
+
+
+rem File Name: hdf5bt.bat
+rem This batch file is used to build and test HDF5 Libraries and Tools.
+rem This batch file takes the following options:
+rem . /fort Build and test HDF5 with Fortran libraries
+rem . /useenv Build HDF5 using compiler settings defined
+rem . in the environment, rather than the IDE.
+rem . /? Help information
+rem By Xuan Bai
+rem Created: Aug. 16, 2004
+rem Last Updated: Scott Wegner, 10/1/07
+
+rem This batch file makes the following assumptions:
+rem - The appropriate version of Visual Studio is installed and setup
+rem - The directory structure is setup from a fresh source copy
+rem - copy_hdf.bat has already been run from the ./windows directory
+rem - Visual Studio already contains the required paths for external libraries
+rem - szip and zlib DLLs are already placed in an accessible directory
+rem - hdf5_ext_szip or hdf5_ext_zlib have been set accordingly
+rem - if building with the /useenv option, szip and zlib paths have been added
+rem to %include% and %libpath% as necessary.
+
+rem By default, only C and C++ libraries are built and tested.
+
+setlocal enabledelayedexpansion
+pushd %~dp0
+
+set nerrors=0
+goto main
+
+rem Print a help message
:help
echo.Builds and tests HDF5 Libraries and Tools.
echo.
- echo %~nx0 [OPTION]
+ echo Usage: %~nx0 [OPTION]
echo.
- echo.Please use one of the following options!
- echo.
- echo. %~nx0 Build and tests HDF5 C/C++ Library and Tools
- echo. %~nx0 /? Help information
-
- exit /b
-
-
-:: This is where the magic happens
-:main
+ echo. /fort Build and test HDF5 with Fortran libraries
+ echo. /useenv Build HDF5 using compiler settings defined
+ echo. in the environment, rather than the IDE.
+ echo. /? Help information
- call :setup
-
- echo.Build and testing all HDF5 libraries and tools
- echo.
+ exit /b 0
- echo.***************************************************************************** >> %bt_results%
- echo. Build and Test HDF5 Library and Tools >> %bt_results%
- echo.***************************************************************************** >> %bt_results%
- echo. >> %bt_results%
- call :build
- if %errorlevel% neq 0 (
- echo.Error building HDF5 libraries!
- goto error
- )
-
- call :test
- if %errorlevel% neq 0 (
- echo.Error testing HDF5 libraries!
- goto error
+rem Parse through the parameters sent to file, and set appropriate variables
+:parse_params
+
+ for %%a in (%*) do (
+ if "%%a"=="/fort" (
+ rem Enable Fortran
+ set hdf5_enablefortran=true
+
+ ) else if "%%a"=="/useenv" (
+ rem Pass /useenv flag to devenv
+ set hdf5_useenv=true
+
+ ) else if "%%a"=="/?" (
+ rem Set errorlevel 1 and send to help
+ call :help
+ exit /b 1
+
+ ) else (
+ rem Set errorlevel 2 to send to help if we receive a bad parameter
+ echo.Unknown option: %%a
+ call :help
+ exit /b 2
+ )
)
-
- echo. All HDF5 libraries and tools build and tested successfully!
- echo. All HDF5 libraries and tools build and tested successfully! >> %build_results%
-
- call :cleanup
-
+
exit /b 0
-
-:: Setup our environment
+
+rem Setup our environment
:setup
- :: Put us in the directory of the batch file.
- pushd %~dp0
-
- :: Constants
- if "x%bt_results%"=="x" set bt_results="%CD%\bt_results.txt"
- if "x%build_results%"=="x" set build_results="%CD%\build_results.txt"
-
- :: Create our results file
- type nul > %bt_results%
-
+ rem All we need to do here is setup the parameters that will be sent to
+ rem hdf5build and hdf5check.
+ set hdf5build_params=
+ set hdf5check_params=enablecpp
+
+ if defined hdf5_enablefortran (
+ set hdf5build_params=%hdf5build_params% /fort
+ set hdf5check_params=enableall
+ )
+
+ if defined hdf5_useenv (
+ set hdf5build_params=%hdf5build_params% /useenv
+ )
+
exit /b 0
-:: Build HDF5 libraries and tools
+rem Build HDF5 libraries and tools
:build
- call hdf5build.BAT
- type %build_results% >> %bt_results%
+ call hdf5build.bat %hdf5build_params%
exit /b
-:: Test our libraries and tools
+rem Test our libraries and tools
:test
- call hdf5check enablecpp
- type check_results.txt >> %bt_results%
+ call hdf5check %hdf5check_params%
exit /b
-:: Handle errors
+rem Handle errors
:error
- :: For now, our error handling just consists of calling cleanup, and exiting
- echo.hdf5bt failed.
- echo.hdf5bt failed. >> %bt_results%
- call :cleanup
+ rem For now, our error handling consists of setting nerrors and quitting
+ echo.HDF5 build-test failed.
+ set /a nerrors=%nerrors%+1
+ goto end
+ rem We'll never really get here, but we keep this line for consistency.
exit /b
-:: Cleanup our environment
-:cleanup
+rem This is where the magic happens
+:main
- set build_results=
+ call :parse_params %*
+ if %errorlevel% neq 0 (
+ if !errorlevel! equ 1 (
+ rem This isn't an error case-- this means /? was specified. Simply
+ rem quit.
+ goto end
+
+ ) else (
+ rem Error case.
+ echo.Error parsing parameters!
+ goto error
+ )
+ )
- :: Don't unset bt_results if it is being used by autotest_hdf5.bat
- if "x%hdf5_auto_results%"=="x" set bt_results=
+ call :setup
- popd
+ echo.*****************************************************************************
+ echo. Build and Test HDF5 Library and Tools
+ echo.*****************************************************************************
+ echo.
- exit /b 0
+ call :build
+ if %errorlevel% neq 0 (
+ echo.Error building HDF5 libraries!
+ goto error
+ )
+
+ call :test
+ if %errorlevel% neq 0 (
+ echo.Error testing HDF5 libraries!
+ goto error
+ )
+
+ if "%nerrors%"=="0" (
+ echo. All HDF5 libraries and tools build and tested successfully!
+ )
+ rem Fall through to end
+
+:end
+ popd
+ endlocal & exit /b %nerrors%
diff --git a/windows/hdf5build.BAT b/windows/hdf5build.BAT index 53a2ff3..8369fcf 100755 --- a/windows/hdf5build.BAT +++ b/windows/hdf5build.BAT @@ -1,74 +1,82 @@ -@rem Copyright by The HDF Group.
-@rem Copyright by the Board of Trustees of the University of Illinois.
-@rem All rights reserved.
-@rem
-@rem This file is part of HDF5. The full HDF5 copyright notice, including
-@rem terms governing use, modification, and redistribution, is contained in
-@rem the files COPYING and Copyright.html. COPYING can be found at the root
-@rem of the source code distribution tree; Copyright.html can be found at the
-@rem root level of an installed copy of the electronic HDF5 document set and
-@rem is linked from the top-level documents page. It can also be found at
-@rem http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-@rem access to either file, you may request a copy from help@hdfgroup.org.
-
@echo OFF
-
-:: File Name: hdf5build.bat
-:: This batch file is used to build HDF5 Libraries and Tools.
-:: There are currently only 2 options for this batch file:
-:: 1. hdf5build -- Print a usage message and quit
-:: 1. hdf5build -- Build HDF5 tools and c library
-:: By Xuan Bai
-:: Created: Aug. 16, 2004
-:: Last Updated: July 13, 2007
-
-:: This batch file makes the following assumptions:
-:: - The appropriate version of Visual Studio is installed and setup
-:: - The directory structure is setup from a fresh source copy
-:: - copy_hdf.bat has already been run from the ./windows directory
-:: - Visual Studio already contains the required paths for external libraries
-:: - szip and zlib DLLs are already placed in an accessible directory
-:: - If hdf5_ext_szip or hdf5_ext_zlib are not set, then %szip_name% and %zlib_name%
-:: will be used, respectively.
-
-:: By default, only C and C++ libraries are built.
-
+rem Copyright by The HDF Group.
+rem Copyright by the Board of Trustees of the University of Illinois.
+rem All rights reserved.
+rem
+rem This file is part of HDF5. The full HDF5 copyright notice, including
+rem terms governing use, modification, and redistribution, is contained in
+rem the files COPYING and Copyright.html. COPYING can be found at the root
+rem of the source code distribution tree; Copyright.html can be found at the
+rem root level of an installed copy of the electronic HDF5 document set and
+rem is linked from the top-level documents page. It can also be found at
+rem http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
+rem access to either file, you may request a copy from helphdfgroup.org.
+
+
+rem File Name: hdf5build.bat
+rem This batch file is used to build HDF5 Libraries and Tools.
+rem This batch file takes the following options:
+rem . /fort Build HDF5 with Fortran libraries
+rem . /useenv Build HDF5 using compiler settings defined
+rem . in the environment, rather than the IDE.
+rem . /? Help information
+rem By Xuan Bai
+rem Created: Aug. 16, 2004
+rem Last Updated: July 13, 2007
+
+rem This batch file makes the following assumptions:
+rem - The appropriate version of Visual Studio is installed and setup
+rem - The directory structure is setup from a fresh source copy
+rem - copy_hdf.bat has already been run from the ./windows directory
+rem - Visual Studio already contains the required paths for external libraries
+rem - szip and zlib DLLs are already placed in an accessible directory
+rem - hdf5_ext_szip or hdf5_ext_zlib have been set accordingly
+rem - if building with the /useenv option, szip and zlib paths have been added
+rem to %include% and %libpath% as necessary.
+
+rem By default, only C and C++ libraries are built.
+
+setlocal enabledelayedexpansion
+pushd %~dp0
+
+set nerrors=0
goto main
-:: Print a help message
+rem Print a help message
:help
echo.Builds HDF5 Libraries and Tools.
echo.
- echo %~nx0 [OPTION]
+ echo.Usage: %~nx0 [OPTION]
echo.
- echo.Please use one of the following options!
- echo.
- echo. %~nx0 Build HDF5 C Library and Tools
- echo. %~nx0 /? Help information
+ echo. /fort Build HDF5 with Fortran libraries
+ echo. /useenv Build HDF5 using compiler settings defined
+ echo. in the environment, rather than the IDE.
+ echo. /? Help information
exit /b 0
-:: Parse through the parameters sent to file, and set appropriate variables
+rem Parse through the parameters sent to file, and set appropriate variables
:parse_params
for %%a in (%*) do (
- if "%1"=="/vs8" (
- :: Use VS2005 as our compiler
- set hdf5_use_vs2005=true
-
- ) else if "%1"=="/fort" (
- :: Enable Fortran
+ if "%%a"=="/fort" (
+ rem Enable Fortran
set hdf5_enablefortran=true
- ) else if "%1"=="/?" (
- :: Set errorlevel 1 and send to help
+ ) else if "%%a"=="/useenv" (
+ rem Pass /useenv flag to devenv
+ set hdf5_useenv=true
+
+ ) else if "%%a"=="/?" (
+ rem Set errorlevel 1 and send to help
call :help
exit /b 1
) else (
- :: Set errorlevel 2 to send to help if we receive a bad parameter (or /?)
+ rem Set errorlevel 2 to send to help if we receive a bad parameter
+ echo.Unknown option: %%a
call :help
exit /b 2
)
@@ -77,157 +85,164 @@ goto main exit /b 0
-:: Setup our environment
+rem Setup our environment
:setup
- echo. Setting up environment >> %build_results%
-
- :: Put us in the directory of the batch file.
- pushd %~dp0
-
- :: Constants
- if "x%build_results%"=="x" set build_results="%CD%\build_results.txt"
- type nul > %build_results%
-
- if "x%zlib_name%"=="x" set zlib_name=zdll.lib
- if "x%szip_name%"=="x" set szip_name=szlibdll.lib
+ rem Constants
- :: By default, use all.sln, unless hdf5_enablefortran is set
+ echo.Setting up environment
+
+ rem By default, use all.sln and typegen.sln, unless hdf5_enablefortran is set
if defined hdf5_enablefortran (
echo.Building Fortran projects enabled
- echo.Building Fortran projects enabled >> %build_results%
set hdf5_sln="%CD%\windows\proj\all_fortran\all_fortran.sln"
- ) else set hdf5_sln="%CD%\windows\proj\all\all.sln"
+ set hdf5_tinit_sln="%CD%\windows\misc\typegen\typegen_fortran.sln"
+ ) else (
+ set hdf5_sln="%CD%\windows\proj\all\all.sln"
+ set hdf5_tinit_sln="%CD%\windows\misc\typegen\typegen.sln"
+ )
- :: Set external libraries if they aren't already set
- if "x%hdf5_ext_zlib%"=="x" set hdf5_ext_zlib=%zlib_name%
- if "x%hdf5_ext_szip%"=="x" set hdf5_ext_szip=%szip_name%
-
- :: Setup Visual Studio environment. By default, use the Visual Studio .NET environment
- if defined hdf5_use_vs2005 (
- echo.Using Visual Studio 2005
- echo.Using Visual Studio 2005 >> %build_results%
- call "%vs80comntools%\vsvars32.bat" >> %build_results%
+ rem Setup Visual Studio environment. By default, use the Visual Studio
+ rem 2005 environment.
+
+ set ccflags=
+
+ rem Currently VS2005 is the only compiler supported. --SJW 9/26/07
+ echo.Using Visual Studio 2005
+
+ if not defined hdf5_enablefortran (
+ if defined vs80comntools (
+ rem This sets the Visual Studio path and environment variables
+ call "%vs80comntools%\vsvars32.bat"
+ ) else (
+ echo.Error: Cannot setup Visual Studio 2005 environment. Please
+ echo.make sure VS80COMNTOOLS is defined in the environment.
+ exit /b 1
+ )
+
) else (
- echo.Using Visual Studio .NET 2003
- echo.Using Visual Studio .NET 2003 >> %build_results%
- call "%vs71comntools%\vsvars32.bat" >> %build_results%
+ echo.with Intel Visual Fortran 9.1
- :: If we are building Fortran libraries with .NET, we need to manually edit
- :: some project files
- if defined hdf5_enablefortran (
- echo.Building Fortran from commandline with .NET not yet implemented!
- echo.Building Fortran from commandline with .NET not yet implemented! >> %build_results%
+ if defined ifort_compiler91 (
+ rem This sets the Intel Fortran 9.1 environment, as well as
+ rem setting the appropriate Visual Studio environment
+
+ rem Assume 32-bit environment
+ call "%ifort_compiler91%\IA32\Bin\ifortvars.bat"
+ ) else (
+ echo.Error: Cannot setup Intel Fortran 9.1 environment. Please
+ echo.make sure IFORT_COMPILER91 is defined in the environment.
exit /b 1
)
)
+
+ if defined hdf5_useenv (
+ rem This will tell Visual Studio to use include, library, etc. paths
+ rem defined by %INCLUDE% %LIBPATH%, etc. Assume the user has already
+ rem added external library paths to these variables.
+ set ccflags=%ccflags% /useenv
+ )
exit /b 0
-:: Build H5tinit.exe and generate h4tinit.c
+rem Build H5tinit.exe and generate h4tinit.c
:h5tinit
- echo. Generating H5tint.c
+ echo.Generating H5tint.c
- echo.***************************************************************************** >> %build_results%
- echo. Build H5Tinit.exe >> %build_results%
- echo.***************************************************************************** >> %build_results%
- echo. >> %build_results%
- devenv .\windows\misc\typegen\typegen.sln /rebuild Debug >> %build_results% 2>&1
- if %errorlevel% neq 0 exit /b
-
- :: Use output to generate h5tinit.c
- .\src\h5tinit.exe > .\src\h5tinit.c
+ echo.*****************************************************************************
+ echo. Build H5Tinit.exe
+ echo.*****************************************************************************
+ echo.
+ devenv %hdf5_tinit_sln% %ccflags% /rebuild Debug
+ if %errorlevel% neq 0 exit /b 1
exit /b
-:: Build the HDF5 libraries. By default, C and C++ libraries are built.
+rem Build the HDF5 libraries. By default, C and C++ libraries are built.
:all
- echo. Building HDF5
+ echo.Building HDF5
- echo.***************************************************************************** >> %build_results%
- echo. Build HDF5 C Library and Tools >> %build_results%
- echo.***************************************************************************** >> %build_results%
- echo. >> %build_results%
+ echo.*****************************************************************************
+ echo. Build HDF5 Library and Tools
+ echo.*****************************************************************************
+ echo.
- :: Build both debug and release versions
+ rem Build both debug and release versions
for %%a in (debug release) DO (
- echo. Building %%a libraries...
- echo. Building %%a libraries... >> %build_results%
- devenv .\windows\proj\all\all.sln /rebuild %%a >> %build_results% 2>&1
- if %errorlevel% neq 0 exit /b
+ echo.Building %%a libraries...
+ devenv .\windows\proj\all\all.sln %ccflags% /rebuild %%a
+ if !errorlevel! neq 0 exit /b
)
exit /b
-:: Handle errors
+rem Handle errors
:error
- :: For now, our error handling just consists of calling cleanup, and setting errorlevel
+ rem For now, our error handling consists of setting nerrors and quitting
echo.HDF5 build failed.
- echo.HDF5 build failed. >> %build_results%
- call :cleanup
-
- exit /b 1
-
-
-:: Cleanup our environment
-:cleanup
-
- set zlib_name=
- set szip_name=
- set hdf5_enablefortran=
- set hdf5_use_vs2005=
-
- :: Don't unset build_results if it is being used by hdf5bt.BAT
- if "x%bt_results%"=="x" set build_results=
- popd
-
- exit /b 0
+ set /a nerrors=%nerrors%+1
+ goto end
+
+ rem We'll never really get here, but we keep this line for consistency.
+ exit /b
-:: This is where the magic happens
+rem This is where the magic happens
:main
call :parse_params %*
if %errorlevel% neq 0 (
- if %errorlevel% equ 2 echo.Error parsing parameters!
- exit /b
+ if !errorlevel! equ 1 (
+ rem This isn't an error case-- this means /? was specified. Simply
+ rem quit.
+ goto end
+
+ ) else (
+ rem Error case.
+ echo.Error parsing parameters!
+ goto error
+ )
)
call :setup
+ if %errorlevel% neq 0 (
+ echo.Error setting up build environment.
+ goto error
+ )
echo.Building HDF5 Libraries and Tools
echo.
- echo.***************************************************************************** >> %build_results%
- echo. Build HDF5 Libraries and Tools >> %build_results%
- echo.***************************************************************************** >> %build_results%
- echo. >> %build_results%
+ echo.*****************************************************************************
+ echo. Build HDF5 Libraries and Tools
+ echo.*****************************************************************************
+ echo.
call :h5tinit
if %errorlevel% neq 0 (
- echo. Error building h5tinit!
- echo. Error building h5tinit! >> %build_results%
+ echo.Error building h5tinit!
goto error
)
call :all
if %errorlevel% neq 0 (
- echo. Error building HDF5 libraries!
- echo. Error building HDF5 libraries! >> %build_results%
+ echo.Error building HDF5 libraries!
goto error
)
- echo. All HDF5 libraries and tools build successfully!
- echo. All HDF5 libraries and tools build successfully! >> %build_results%
-
- call :cleanup
+ if "%nerrors%"=="0" (
+ echo. All HDF5 libraries and tools build successfully!
+ )
+ rem Fall through to end
- exit /b 0
+:end
+ popd
+ endlocal & exit /b %nerrors%
|