diff options
Diffstat (limited to 'windows')
-rw-r--r-- | windows/src/H5FDwindows.c | 156 | ||||
-rwxr-xr-x | windows/src/H5pubconf.h | 14 |
2 files changed, 57 insertions, 113 deletions
diff --git a/windows/src/H5FDwindows.c b/windows/src/H5FDwindows.c index f3c0b46..65c6579 100644 --- a/windows/src/H5FDwindows.c +++ b/windows/src/H5FDwindows.c @@ -86,23 +86,44 @@ typedef struct H5FD_windows_t { /*
- * This driver supports systems that have the lseeki64() function by defining
- * some macros here so we don't have to have conditional compilations later
- * throughout the code.
- *
- * file_offset_t: The datatype for file offsets, the second argument of
- * the lseek() or lseeki64() call.
- *
- * file_seek: The function which adjusts the current file position,
- * either lseek() or lseek64().
+ * Below we make several definitions based on whether 64-bit safe system
+ * calls are available. If they are not, the normal 32-bit routines will be
+ * used, and files over 2GB are not supported.
*/
-
-# define file_offset_t __int64
+#ifdef H5_HAVE_FSEEKI64
# define file_seek _fseeki64
-
+# define fseek_offset_t __int64
+#else
+# define file_seek fseek
+# define fseek_offset_t long
+#endif
+
+#ifdef H5_HAVE_CHSIZE_S
+# define change_size _chsize_s
+# define chsize_offset_t __int64
+#else
+# define change_size _chsize
+# define chsize_offset_t long
+#endif
+
+#ifdef H5_HAVE_STATI64
+# define file_stat _stati64
+# define stat_struct_t struct _stati64
+#else
+# define file_stat _stat
+# define stat_struct_t struct _stat
+#endif
+
+#ifdef H5_HAVE_FTELLI64
+# define file_tell _ftelli64
+# define ftell_ret_t __int64
+#else
+# define file_tell ftell
+# define ftell_ret_t long
+#endif
/*
* These macros check for overflow of various quantities. These macros
- * assume that file_offset_t is signed and haddr_t and size_t are unsigned.
+ * assume that fseek_offset_t is signed and haddr_t and size_t are unsigned.
*
* ADDR_OVERFLOW: Checks whether a file address of type `haddr_t'
* is too large to be represented by the second argument
@@ -115,13 +136,13 @@ typedef struct H5FD_windows_t { * which can be addressed entirely by the second
* argument of the file seek function.
*/
-#define MAXADDR (((haddr_t)1<<(8*sizeof(file_offset_t)-1))-1)
+#define MAXADDR (((haddr_t)1<<(8*sizeof(fseek_offset_t)-1))-1)
#define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || \
((A) & ~(haddr_t)MAXADDR))
#define SIZE_OVERFLOW(Z) ((Z) & ~(hsize_t)MAXADDR)
#define REGION_OVERFLOW(A,Z) (ADDR_OVERFLOW(A) || SIZE_OVERFLOW(Z) || \
HADDR_UNDEF==(A)+(Z) || \
- (file_offset_t)((A)+(Z))<(file_offset_t)(A))
+ (fseek_offset_t)((A)+(Z))<(fseek_offset_t)(A))
/* Prototypes */
static H5FD_t *H5FD_windows_open(const char *name, unsigned flags, hid_t fapl_id,
@@ -323,12 +344,12 @@ H5FD_windows_open(const char *name, unsigned flags, hid_t UNUSED fapl_id, int fd ;
h5_stat_t sb ;
H5FD_t *ret_value ;
- __int64 x ;
+ ftell_ret_t x ;
FUNC_ENTER_NOAPI(H5FD_windows_open, NULL)
/* Sanity check on file offsets */
- assert(sizeof(file_offset_t)>=sizeof(size_t));
+ assert(sizeof(fseek_offset_t)>=sizeof(size_t));
/* Check arguments */
if (!name || !*name)
@@ -361,99 +382,10 @@ H5FD_windows_open(const char *name, unsigned flags, hid_t UNUSED fapl_id, if (!f)
HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- ///* Translate our flags into a mode, and open the file */
- //if(!access(name, F_OK)) {
- // /* This means that the file already exists */
- // switch(flags) {
- // case H5F_ACC_RDONLY | H5F_ACC_TRUNC:
- // case H5F_ACC_RDONLY | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_EXCL:
- // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_EXCL:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // /* Error cases */
- // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- // break;
-
- // case H5F_ACC_RDWR:
- // case H5F_ACC_RDWR | H5F_ACC_TRUNC:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC:
- // case H5F_ACC_RDWR | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // /* This will open an existing file with r/w access,
- // and destroy any existing contents */
- // f = fopen(name, "wb+");
- // write_access = 1;
- // break;
-
- // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_CREAT:
- // /* This will open an existing file with r/w access,
- // and destroy any existing contents. However,
- // the user should not be allowed to write. */
- // f = fopen(name, "wb+");
- // /* No write access */
- // break;
-
- // case H5F_ACC_RDONLY:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT:
- // /* This will open an existing file with r/w access,
- // keeping existing contents in tact. However,
- // the users should not be allowed to write. */
- // f = fopen(name, "rb");
- // /* no write access */
- // break;
-
- // default:
- // /* Should never get here */
- // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- // break;
- // } /* end switch */
- //} else {
- // /* This means that the file does not exist */
- // switch(flags) {
- // case H5F_ACC_RDONLY:
- // case H5F_ACC_RDWR:
- // case H5F_ACC_RDONLY | H5F_ACC_TRUNC:
- // case H5F_ACC_RDWR | H5F_ACC_TRUNC:
- // case H5F_ACC_RDONLY | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_EXCL:
- // case H5F_ACC_RDONLY | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // /* Error cases */
- // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- // break;
-
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_EXCL:
- // case H5F_ACC_RDONLY | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // /* This will create a new file with r/w access,
- // but the user shouldn't be allowed to write anyway */
- // f = fopen(name, "wb+");
- // /* No write access */
- // break;
-
- // case H5F_ACC_RDWR | H5F_ACC_CREAT:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_EXCL:
- // case H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC | H5F_ACC_EXCL:
- // /* This will create a new file with r/w access */
- // f = fopen(name, "wb+");
- // write_access = 1;
- // break;
-
- // default:
- // /* Should never get here */
- // HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- // break;
- // } /* end switch */
- //} /* end if */
if (!f)
HSYS_GOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "fopen failed")
- if (_stati64(name, &sb) == -1)
+ if (file_stat(name, (stat_struct_t*)&sb) == -1)
HSYS_GOTO_ERROR(H5E_FILE, H5E_BADFILE, NULL, "unable to fstat file")
/* Create the new file struct */
@@ -463,10 +395,10 @@ H5FD_windows_open(const char *name, unsigned flags, hid_t UNUSED fapl_id, file->fp = f;
H5_ASSIGN_OVERFLOW(file->eof,sb.st_size,h5_stat_size_t,haddr_t);
- if(_fseeki64(file->fp, (__int64)0, SEEK_END) == -1) {
+ if(file_seek(file->fp, (fseek_offset_t)0, SEEK_END) == -1) {
HGOTO_ERROR(H5E_IO, H5E_SEEKERROR, NULL, "unable to seek in file")
}
- x = _ftelli64(file->fp);
+ x = file_tell(file->fp);
assert(x>=0);
file->pos = file->eof = (haddr_t)x;
@@ -841,7 +773,7 @@ H5FD_windows_read(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, h /* Seek to the correct location */
if ((addr!=file->pos || OP_READ!=file->op))
- if (file_seek(file->fp, (file_offset_t)addr, SEEK_SET) == -1) {
+ if (file_seek(file->fp, (fseek_offset_t)addr, SEEK_SET) == -1) {
file->op = OP_UNKNOWN;
file->pos = HADDR_UNDEF;
HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
@@ -931,7 +863,7 @@ H5FD_windows_write(H5FD_t *_file, H5FD_mem_t UNUSED type, hid_t UNUSED dxpl_id, /* Seek to the correct location */
if ((addr!=file->pos || OP_WRITE!=file->op))
- if (file_seek(file->fp, (file_offset_t)addr, SEEK_SET) == -1) {
+ if (file_seek(file->fp, (fseek_offset_t)addr, SEEK_SET) == -1) {
file->op = OP_UNKNOWN;
file->pos = HADDR_UNDEF;
HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to seek to proper position")
@@ -1010,7 +942,7 @@ H5FD_windows_flush(H5FD_t *_file, hid_t UNUSED dxpl_id, unsigned closing) if((fd = _fileno((FILE*)file->fp)) == -1)
HGOTO_ERROR(H5E_FILE, H5E_CANTOPENFILE, NULL, "unable to get file descriptor for file")
- if(_chsize_s(fd, file->eoa))
+ if(change_size(fd, (chsize_offset_t)file->eoa))
HSYS_GOTO_ERROR(H5E_IO, H5E_SEEKERROR, FAIL, "unable to extend file properly")
/* Update the eof value */
diff --git a/windows/src/H5pubconf.h b/windows/src/H5pubconf.h index 47cd2cf..6942fc1 100755 --- a/windows/src/H5pubconf.h +++ b/windows/src/H5pubconf.h @@ -24,7 +24,11 @@ #define H5_SIZEOF_LONG_DOUBLE 8 #define H5_SIZEOF_OFF_T 4 #define H5_SIZEOF_SHORT 2 +#ifndef _WIN64 #define H5_SIZEOF_SIZE_T 4 +#else +#define H5_SIZEOF_SIZE_T 8 +#endif /*#if defined __INTEL_COMPILER #define H5_SIZEOF_LONG_DOUBLE 12 @@ -74,13 +78,21 @@ in the file file_io.win32.c and including it on the projects #define H5_HAVE_STRDUP 1 #define H5_HAVE_SYSTEM 1 #define H5_HAVE_VSNPRINTF 1 -#define H5_HAVE_IO_H 1 +#define H5_HAVE_IO_H 1 #define H5_HAVE_SETJMP_H 1 #define H5_HAVE_STDDEF_H 1 #define H5_HAVE_SYS_STAT_H 1 #define H5_HAVE_SYS_TIMEB 1 #define H5_HAVE_SYS_TYPES_H 1 #define H5_HAVE_WINSOCK_H 1 +#define H5_HAVE_STATI64 1 + + /* These 64-bit functions are only supported in .NET Framework 2.0 or later */ + #if _MSC_VER >= 1400 + #define H5_HAVE_FSEEKI64 1 + #define H5_HAVE_CHSIZE_S 1 + #define H5_HAVE_FTELLI64 1 + #endif /* _MSC_VER >= 1400 */ /* comment the following line out if the memory buffers being written to disk should not be cleared before writing. */ |