| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./src/H5.c
./src/H5Smpio.c
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpublic.h
./src/H5detect.c
./src/H5private.h
./src/H5public.h
./test/big.c
The `long long' type isn't quite as prevalent as we had hoped;
there is at least one system that defines `__int64' but not
`long long'. Therefore, I've temporarily changed all
occurrences of `long long' to `long_long' and then #define
that in H5private.h based on the existence of `long long' or
`__int64'. This gets rid of some #ifdef's in other parts of the code.
The semantics of the hdf5 types are:
*int8_t Exactly one byte
*int16_t At least two bytes. We favor 32-bit integers over
16-bit integers if the 16-bit integer is 4-bytes wide
(Cray)
*int32_t At least four bytes.
*int64_t At least eight bytes
long_long The widest integral integer type
The H5Smpio.c contains debugging code which is non-portable.
./tools/h5ls.c
Changed the order native types are detected so we favor the name `int'
over `short' or `long' if two of them are the same.
./config/conclude.in
Added a rule to make test programs depend on the hdf5 library. This
fixes a minor bug where changing H5detect.c and then running `make
test' caused H5Tinit.c to not be recompiled and therefore the test
files are not relinked.
|
| |
|
|
| |
I included a comment everywhere that this was needed.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./INSTALL.parallel [NEW]
We're beginning to unify some of the parallel installation
steps. This file will contain general information for
installing the parallel library. It's not complete yet.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Check for xdr_int() in libnsl required on Solaris when linking
with hdf4. It's found on the Irix system I tested which
complains that `-lnsl' didn't resolve any symbols. Oh well.
Fixed the order of searching for libdf and libmfhdf for hdf4
linking.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5Z.c
Check for compress() in libz in order to find older versions
of the library that will still work for hdf4. Added a
separate check for compress2() that hdf5 will use.
./configure.in
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
./src/H5.c
./src/H5private.h
./src/H5A.c
./src/H5B.c
./src/H5Bprivate.h
./src/H5D.c
./src/H5F.c
./src/H5Farray.c
./src/H5Fcore.c
./src/H5Ffamily.c
./src/H5Fistore.c
./src/H5Flow.c
./src/H5Fmpio.c
./src/H5Fprivate.h
./src/H5Fsec2.c
./src/H5Fsplit.c
./src/H5Fstdio.c
./src/H5Gent.c
./src/H5Gnode.c
./src/H5Gpkg.h
./src/H5Gprivate.h
./src/H5HG.c
./src/H5HL.c
./src/H5O.c
./src/H5Oattr.c
./src/H5Ocomp.c
./src/H5Ocont.c
./src/H5Odtype.c
./src/H5Oefl.c
./src/H5Ofill.c
./src/H5Olayout.c
./src/H5Omtime.c
./src/H5Oname.c
./src/H5Oprivate.h
./src/H5Osdspace.c
./src/H5Oshared.c
./src/H5Ostab.c
./src/H5R.c
./src/H5RA.c
./src/H5Sall.c
./src/H5Shyper.c
./src/H5Snone.c
./src/H5Spoint.c
./src/H5Sprivate.h
./src/H5Sselect.c
./src/H5T.c
./src/H5Tbit.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5V.c
./test/bittests.c
./test/gheap.c
./test/hyperslab.c
./test/istore.c
./test/tmeta.c
./test/trefer.c
./test/tselect.c
./tools/h5debug.c
./tools/h5tols.c
Added checks for Posix.1g types like `int8_t'. If not defined
then H5private.h defines them. Changed all `int8' etc. to
`int8_t'.
./src/H5A.c
./src/H5D.c
./src/H5F.c
./src/H5G.c
./src/H5I.c
./src/H5P.c
./src/H5R.c
./src/H5RA.c
./src/H5S.c
./src/H5T.c
./src/H5TB.c
./src/H5Z.c
Calling H5*_term_interface() resets interface_initialize_g to
FALSE so a subsequent call to H5open() (implied or explicit)
reinitializes global variables properly.
./src/H5private.h
./src/H5Oefl.c
./src/H5S.c
Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to
SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they
match the Posix.1 constants in <limits.h>.
./src/H5T.c
./src/H5Tconv.c
./src/H5Tpkg.h
./src/H5Tprivate.h
./src/H5detect.c
Added 36 more integer hardware conversion functions to the
type conversion table for conversions to/from `long long' and
`unsigned long long'. The `long long' names will be changed
shortly to make them portable to Win32.
Changed H5T_init() to H5T_native_open() and added an
H5T_native_close() to open and close the predefined native
data types.
Increased the initial size of the type conversion table from
64 to 128 entries.
Reordered the 90 new integer conversion functions so the names
that are printed favor `int' over `short' or `long' when two
of them are the same.
./test/dtypes.c
Added hardware and software integer conversion tests for the
56 functions I added recently but not the additional 36
checked in this time. That will come next.
Call H5close() after each test so type conversion statistics
are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes
Added more debugging output for when things go wrong.
./src/H5private.h
Removed trailing carriage-returns inserted by broken operating
system ;-)
|
| |
|
|
| |
alphabetically.
|
| | |
|
| |
|
|
| |
better accuracy.
|
| |
|
|
| |
of the compiler 0.0->5.0
|
| |
|
|
|
|
| |
the winsock2.h
file
|
| |
|
|
|
|
| |
flag list for the
open function
|
| |
|
|
| |
also updated the proj file for the library.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
In machine (e.g. O2K) where long long and long are the same sizes, it
ended up defining GB8LL as 1 which is way too small for the dataset size.
Solution:
Add an entry to define GB8LL if long can hold it. When all fails,
define GB8LL as 0. During runtime, enough_room() will detect this
special value and skips the test.
Platform tested:
O2K IRIX64.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./config/conclude.in
./test/Makefile.in
./tools/Makefile.in
The Makefile $TESTS variable has finally been split into
$TEST_PROGS and $TEST_SCRIPTS with the latter being the names
of shell scripts that need to be run with `/bin/sh'. Now we
don't have to copy each shell script before we run it. NOTE:
THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE
IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE.
./src/Makefile.in
Added H5Snone.c to the source list.
./src/H5G.c
Plugged a memory leak by emptying the object type "isa" table
when the library is closed.
./src/H5Tconv.c
./src/H5Tpkg.h
Added 48 new type functions to take advantage of hardware for
integer type conversions. These functions are not registered
in the conversion table yet because I haven't fully tested
them.
./src/H5Tpkg.h
Removed __unused__ qualifiers from prototypes.
|
| |
|
|
| |
Tested on O2K in both parallel and serial modes.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./INSTALL
Added instructions about specifying a path for GNU zlib and
HDF4 headers and library.
Added comments for each of the tool names. Added h5toh4 as a
tool name.
./configure.in
./conigure [REGENERATED]
./src/H5config.h.in [REGENERATED]
The config/* scripts get invoked with $CC_BASENAME set the
base name of the compiler in order to make it easier to handle
setting compiler flags for different compilers in a big case
statement. For instance, if $CC has the value
/usr/local/mpi/bin/mpicc -ansi -64
then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not
set if $CC is not set.
Fixed alignment in `configure --help'.
An include and/or library path can be specified for GNU zlib
if configure can't find it in normal places. The "normal"
means wherever your compiler normally searches, including
search paths you've added through environment variables like
CPPFLAGS and LDFLAGS. The INSTALL file has instructions.
The `-ljpeg' library is detected.
If `ssize_t' is not found then a #define is added to
H5config.h similar to what we already do for `size_t'.
We detect the hdf5 header file `mfhdf.h' and libraries
`-lmfhdf' and `-ldf' and if found define the H5TOH4 and
TESTH5TOH4 Makefile variables. The user can specify an
include and/or library path. The INSTALL file has
instructions.
The `RUNTEST' variable has been split into `RUNSERIAL' and
`RUNPARALLEL' because these are different commands. The
makefile still uses `RUNTEST', which defaults to the RUNSERIAL
value. The new testpar/Makefile.in sets RUNTEST to the
RUNPARALLEL value. The default RUNSERIAL value is empty and
the default RUNPARALLEL value is `mpirun -np 2'. These can
both be overridden in the config/* files. To make the value
the empty string set it like `RUNPARALLEL=none' in the
config/* file.
The new testpar/Makefile is generated from testpar/Makefile.in
./config/commence.in
Added the RUNSERIAL and RUNPARALLEL makefile definitions.
./src/Makefile.in
The `H5detect' program is run with RUNSERIAL, which is empty
on all platforms except intel-osf1 (ASCI/Red)
./config/conclude.in
Removed the `.c.a:' implicit rule -- we don't use it any more.
./config/BlankForm
./config/alpha-dec
./config/alpha-dec-osf4.0
./config/freebsd2.2.7
./config/hpux10.20
./config/hpux9.03
./config/intel-osf1
./config/irix5.3
./config/irix6.2
./config/irix64
./config/linux
./config/powerpc-ibm-aix4.2.1.0
./config/rs6000-ibm-aix4.1.4.0
./config/solaris2.5
All of these files have been updated to hande multiple
compilers. Most of them assume `cc' if CC is not set. The
documentation in `BlankForm' has been updated and
documentation in the other files refer to `BlankForm'.
The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra
library search paths.
./examples/Makefile.in
./test/Makefile.in
./tools/Makefile.in
Simplified by grouping some dependency information together
more succinctly.
The tools Makefile.in has been modified to work with the
`h5toh4' and `testh5toh4' programs. Until Paul checks these
in you may have problems compiling. If so, just create files
h5toh4.c and testh5toh4.c that contain:
#include <stdio.h>
int main(int argc, char *argv[]) {
fprintf(stderr, "%s: not implemented\n", argv[0]);
return 1;
}
./src/H5public.h
Removed definition for `ssize_t' since this is now handled by
configure in H5config.h with a #define.
./MANIFEST
./testpar/Makefile.in [NEW]
Added a makefile for parallel tests. As soon as we get this
working properly we can remove the other four makefiles in
that directory and maintain just one.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
Plugged a memory leak in the union of hyperslabs code.
Checkpointing dataset region references, which are working, but not stored in
file yet.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./tools/h5ls.c
The chunk dimensions and total size is printed for chunked datasets.
./examples/h5_attribute.c
./examples/h5_select.c
./test/chunk.c
./test/iopipe.c
./test/ragged.c
./src/H5.c
./src/H5private.h
./src/H5public.h
Removed extra carriage-return characters inserted by a broken
OS :-)
Reformatted strange-looking comments.
Removed C++ comments.
Wrapped long lines.
./examples/h5_attribute.c
./examples/h5_select.c
Removed inclusion of private headers.
Changed `uint32' (originally `uint') to `unsigned' because
`int32' is not exported as part of the API.
./src/H5Fmpio.h
Removed includes for <sys/types.h> and <sys/stat.h> since
they're already included by H5private.h. All system include
files should be included in H5private.h so we can wrap them
with appropriate feature macros.
./tools/h5import.c
./tools/h5repart.c
Included header files like all other programs in that
directory.
./tools/h5tools.c
Better type checking for `hsize_t' and `hssize_t'.
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
this was causeing a problem because FILE is deifned in a header that was included
|
| |
|
|
|
|
| |
converting to
a double from an unsigned int 64
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
| |
caused a conflict on winNT because hyper is a keyword
|
| | |
|
| |
|
|
| |
function call
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./configure.in
./acconfig.h
./configure [REGENERATED]
./src/H5config.h.in [REGENERATED]
Added checks for functions, structs, constants, and header
files used in h5ls.c to determine the output width with
various Windows compilers and Unix variants.
Added check for <sys/stat.h> and defined
HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside
the Posix.1 #include's section.
./src/H5RA.c
Less aggressive about failing -- rather returns false, which
allows type detection to continue.
./src/h5ls.c
Data types are displayed for datasets and named data types when
`-v' or `--verbose' is specified on the command-line. The
algorithm is a little different than the dumper because we're
trying to be human-friendly, not necessarily machine-friendly.
* Any data type which matches a native C type gets printed
something like `native double'.
* A floating point type that matches one of the IEEE standard
types but not one of the native types gets printed like `IEEE
64-bit big-endian float'.
* Other floating point values have information about sign bit
location; exponent size, location, and bias; and significand
size, location, and normalization.
* Padding and offsets are displayed for types that have
padding (precision != size), including internal padding for
some floating point data types.
* Non-native integer types are displayed like `32-bit
little-endian unsigned integer'.
* Compound data types have each member displayed including the
member name, byte offset within the struct, dimensions, index
permutation, and data type.
* String types are displayed like `256-byte null-terminated
ASCII string'.
* References are displayed like `8-byte unknown reference'
until the reference interface stabilizes a little.
* All other types including types not yet defined will be
printed like `4-byte class-9 unknown'.
The dimensionality of scalar datasets is printed like `{SCALAR}'
instead of just `{}'.
If external raw files are used to store a dataset then the offsets,
sizes, and file names of each are printed if `-v' or `--verbose'
was given on the command-line.
If an object is found and h5ls can't determine the object type then
it still tries to print the number of hard links, the OID, and any
comment that might be present if `-v' or `--verbose' was specified.
If the `-d' or `--dump' switch is turned on then ragged arrays will
report that the data can only be dumped by dumping the component
datasets explicitly. I'm not planning to implement this since
we're going to eventually change the whole way ragged arrays are
stored.
Compound data values do not have the component names displayed by
default when `-v' or `--verbose' is turned on. Instead, the names
can be displayed with `-l' or `--label'.
The output width is determined by the first rule that applies:
* If the `-wN', `-w N' or `--width=N' switch appeared on
the command line then use N for the output width.
* Query the OS for the tty width in a highly unportable way
borrowed from GNU `less' depending on what functions and
data structures were found during configuration (if any):
_getvideoconfig(), gettextinfo(), _srcsize(), ioctl(),
GetConsoleScreenBufferInfo(), struct videoconfig, struct
text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl.
* If the `COLUMNS' environment variable is set then use
its value.
* Use the value 80.
Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv
test.vbt'. You can also try it on the various *.h5 files in the
test/example directories.
./config/linux
Removed turning on parallel by default on Robb's macine.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
----------------------
./bin/snapshot
Made same fix as for the release script yesterday.
./src/H5D.c
./src/H5Dprivate.h
./src/H5G.c
./src/H5Gprivate.h
./src/H5Gpublic.h
./src/H5O.c
./src/H5Oprivate.h
./src/H5RA.c
./src/H5RAprivate.h
./src/H5T.c
./src/H5Tprivate.h
Improved object type checking. Instead of determining the
object type by trying to open each of the possible types, we
keep a table of associations between object type number (like
H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa'
function that returns true if the object header has the right
messages to make the object a particular type. This mechanism
also allows specialization of object types by permitting an
object to satisfy more than one `isa' function.
Added `isa' functions for groups, datasets, ragged arrays, and
committed data types.
./src/H5config.h.in
Added HAVE_STAT_ST_BLOCKS. I thought this had already been
added, but apparently not.
./tools/h5ls.c
Removed system include files since they're already included by
H5private.h and since I wasn't including them portably anyway.
By default, 1-byte integer types are printed as integer values
instead of ASCII characters. However, the `-s' or `--string'
command-line switch causes the data to be interpretted as
ASCII. String data types are always printed as character
data.
Ragged arrays are now identified as ragged arrays and h5ls
doesn't descend into the group automatically. This uses the
new object type specialization stuff.
./tools/h5tools.c
./tools/h5tools.h
Added the ability to print 1-byte integer types as either
ASCII or numeric data instead of always ASCII. The default is
to print as numeric data.
|
| | |
|
| | |
|
