summaryrefslogtreecommitdiffstats
path: root/MANIFEST
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r1572] Changes since 19990810Robb Matzke1999-08-171-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5FDmulti.c [NEW] ./src/H5FDmulti.h [NEW] ./src/Makefile.in ./src/hdf5.h The split driver was reimplemented as a more general "multi" driver which is capable of splitting data into multiple files like the family driver except the partioning is done by memory usage type instead of address. The H5Pset_fapl_split() function just calls H5Pset_fapl_multi() with arguments which prepare to split the address space into two files: meta and raw data. This is the first version. I plan to allow the open() call to relax a bit which would allow one to open an hdf5 file when only the meta-data file is present. This would allow a very large file to be split and stored on tape and the relatively small meta file to be mirrored on disk to allow limited browsing of the file (any request for raw data would fail). ./src/H5private.h ./src/H5F.c ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c Added the ability for a file driver to store information in the superblock which would be needed if the file were opened again later for reading. The format is driver-defined which allows users to extend it however they like. ./doc/html/H5.format.html Added information about the new driver information block of the superblock. This is where file drivers store information they need in order to reopen the file later. ./src/H5F.c ./src/H5Fprivate.h ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5Fistore.c ./src/H5R.c The file access properties and the file access property list were decoupled, which allows the property list to more cleanly contain properties for various levels of the file and which allows the property list to be modified more cleanly when opening files. ./src/H5.c ./src/H5FDpublic.h Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never used. ./src/H5D.c Changed the way we detect the MPIO driver in all these special cases. ./src/H5F.c ./src/H5Rpublic.h ./test/tfile.c The default file sizeof(offset) was changed to be a function of haddr_t instead of hsize_t. THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES! ./src/H5F.c Fixed an uninitialized memory access bug in file closing related to the VFL. ./src/H5T.c ./src/H5Tpublic.h Added an H5T_NATIVE_HADDR predefined datatype which corresponds to the `haddr_t' type. ./test/Makefile.in Reformatted long lines. ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Removed the H5F_ACC_DEBUG flag from file creation/open calls. ./test/big.c Plugged a memory leak. ./test/h5test.c Added support for the `multi' driver. Removed #warning about not having the stdio driver. Plans are to not implement it since the sec2 driver serves the same purpose and testing didn't show any difference in execution times between the two.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1559] Updated for the newly added INSTALL_Windows.txt file.Albert Cheng1999-08-021-0/+1
|
* [svn-r1448] Added two IBM specific configuration files which are provided byAlbert Cheng1999-07-081-0/+2
| | | | Richard Hedges of LLNL.
* [svn-r1446] Makefile.ibmsp is no longer needed. Configure generates the rightAlbert Cheng1999-07-081-1/+0
| | | | Makefile for it.
* [svn-r1444] Added missing files to manifestQuincey Koziol1999-07-071-0/+2
|
* [svn-r1422] Patrick Lu1999-07-061-0/+6
| | | | | added entries to the new files I added to the testfile dir(tenum.h5 tenum.ddl tobjref.h5 tobjref.ddl tdatareg.ddl tdatareg.h5)
* [svn-r1399] Updated for the removal of the two old Makefile's in testpar.Albert Cheng1999-07-011-2/+0
|
* [svn-r1396] Updated with new location of h5dumptst.c.Albert Cheng1999-06-301-1/+1
|
* [svn-r1381] Elena Pourmal1999-06-251-0/+2
| | | | h5_mount.c and h5_reference.c were added.
* [svn-r1338] Removed the tools/testfiles/*.dmp which are no longer used.Albert Cheng1999-06-141-13/+0
|
* [svn-r1337] Updated it with new files created for the h5toh4 tests.Albert Cheng1999-06-141-0/+14
|
* [svn-r1331] Added VL datatype test fileQuincey Koziol1999-06-111-0/+1
|
* [svn-r1315] Changes since 19990607Robb Matzke1999-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] ./src/libhdf5.settings.in [NEW] ./config/conclude.in ./INSTALL ./MANIFEST A file called `libhdf5.settings' is installed along with the libraries and it contains a list of various things that might be of interest to someone using the library (such as what compiler/options were used and what other libraries might need to be linked to satisfy external references). We can add more things as it becomes necessary. Here's a sample... SUMMARY OF THE HDF5 CONFIGURATION ================================= HDF5 Version: hdf5-1.1.106 Configured on: Tue Jun 8 11:38:52 EDT 1999 Configured by: matzke@llnl.gov at Spizella Software Configure mode: development Host system: i686-pc-linux-gnulibc1 Byte sex: little-endian Libraries: static, shared Parallel support: mpicc Installation point: /usr/local Compiler: mpicc (egcs-2.91.66) Compiler switches: -Wall -g Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm Archiver: ar Ranlib: ranlib Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z API Tracing: yes File addresses: large
* [svn-r1304] Added new H5Tvlen.c file to manifest. I don't recall changing ↵Quincey Koziol1999-06-041-0/+1
| | | | | | the configure script though... :-?
* [svn-r1250] Added DatatypesEnum.html and EnumMap.gifQuincey Koziol1999-05-061-0/+2
|
* [svn-r1230] Forgot to add pablo/READ_ME to the MANIFEST file last timeRobb Matzke1999-04-281-0/+1
|
* [svn-r1228] Added missing pablo files to MANIFEST. Snapshots should start ↵Robb Matzke1999-04-281-0/+1
| | | | working again...
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-231-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1138] Changes since 19990304Robb Matzke1999-03-121-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/*-aix4.* [REMOVED] ./config/*-aix4.x [NEW] ./config/solaris2.5 [REMOVED] ./config/solaris2.x [NEW] ./configure.in ./configure [REGENERATED] ./MANIFEST Changed the names of the IBM-SP2 config files by replacing the minor version numbers with an `x'. The solaris config warns about old versions of gcc. The RUNSERIAL value is set to the empty string by default. The config/* file (or user) can override it by setting it to some other value. The `--enable-parallel' with no flags turns on the HAVE_PARALLEL constant in the source code but doesn't add any MPI or MPI-IO libraries to the link line. If we are compiling for parallel then configure checks that we can actually link a very simple program. This has the benefit of detecting config errors before we waste time compiling the entire library. Configure recognizes `mpcc_r' as a parallel compiler. ./src/H5A.c ./src/H5Apublic.c Fixed some compiler warnings. Changed the return type of H5Aget_name() from hssize_t to ssize_t because the name can never be larger then memory.
* [svn-r1117] Changes since 19990303Robb Matzke1999-03-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] The path for a command is calculated explicitly the hard way because `type -path' isn't portable. ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc2 Changed the way files reference each other. ./config/gnu-flags [NEW] ./config/dec-flags [NEW] These files figure out what flags to pass to certain compilers so we can reuse code in more than one config/* file. They also have better warning messages when old compilers are used. ./config/linux-gnulibc1 ./config/dec-osf4.x These files use the new *-flags files. ./src/H5D.c ./src/H5Onull.c ./src/H5Tconv.c ./tools/h5ls.c Fixed a compiler warning. ./src/H5detect.c Added a better comment to the top of the generated file.
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-021-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
* [svn-r1097] Added ./config/unicosmkRobb Matzke1999-02-231-0/+1
|
* [svn-r1071] Moved the MPI test to a file of its own (t_mpi.c) for future ↵Albert Cheng1999-02-171-0/+1
| | | | | | | | | addition of other MPI tests. Changed return code tests from comparing with FAIL to with 0. Updated MANIFEST for the addition of a new file. Tested in O2k.
* [svn-r1065] Changes since 19990121Robb Matzke1999-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5public.h ./src/H5Omtime.c Check for <stddef.h> Checks for `__tm_gmtoff' in `struct tm' because old versions of GNU libc are different than recent versions. This fixes the failing mtime test. ./bin/config.guess ./config/freebsd2.2.7 [REMOVED] ./config/freebsd [ADDED] Changed the name so it works with all versions of FreeBSD. ./src/H5.c Moved H5F after H5T and H5G in H5_term_library() to satisfy dependencies. ./src/H5G.c Fixed a bug that caused H5Gcreate() to fail if the group name had trailing slashes. ./src/H5Gpublic.h Changed `group_name' to `name' in a prototype. ./src/Makefile.in Dynamic library on Linux, but needs for work to be generally useful. ./src/H5HG.c ./src/H5HGprivate.h Fixed alignment problems when using old GCC compilers (like the one shipped with RedHad Linux). ./tools/h5ls.c Fixed a bug where the contents of the root group could be listed twice if there was a link back to the root group. Similarly for groups that are mentioned on the command line. Fixed a bug where unknown types were printed with a random type class number. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h Fixed O(log N) conversion bugs.
* [svn-r1054] Added H5api_adpt.h tstr*.dmp and tstr2.h5Robb Matzke1999-02-021-0/+4
|
* [svn-r1042] added ./tools/testfiles/tstr-1.ddl and ./tools/testfiles/tstr.h5.Ruey-Hsia Li1999-02-011-0/+2
|
* [svn-r1037] All IRIX (old 32bit OS) version 6.x can use the same configuration.Albert Cheng1999-01-291-1/+1
| | | | Replaced irix6.2 by irix6.x.
* [svn-r1008] Changes since 19981217Robb Matzke1999-01-071-0/+1
| | | | | | | | | | | | | ---------------------- ./MANIFEST Removed some ddl files from tools/testfiles that are no longer part of CVS. Added new enum.c test. ./configure [REGENERATED] ./configure.in Changed printf long long format detection to favor `L' over `ll'.
* [svn-r1007] Updated with missing files.Quincey Koziol1999-01-061-0/+7
|
* [svn-r984] Added ./tools/testfiles/tloop-1.ddl.Ruey-Hsia Li1998-12-211-5/+1
| | | | | | | | Removed ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tcomp-4.ddl ./tools/testfiles/tdset-3.ddl ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tgroup-3.ddl.
* [svn-r968] Changes since 19981207Robb Matzke1998-12-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added tcompound2.{dmp,h5} and tdset2.{dmp,h5} used by the h5toh4 testing. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added check for <sys/timeb.h> for Win32. Determines sizeof(char) just so we have a complete list of type sizes defined as preprocessor symbols. ./src/H5detect.c ./src/H5T.c ./src/H5Tpkg.h Detects alignment constraints. In order for this to work the operating system must not correct unaligned data (for instance, on the DEC Alpha one might need to say `uac p sigbus' before running H5detect). ./src/H5private.h Includes <signal.h> because it's needed by H5detect.c to detect alignment constraints. ./src/H5Tconv.c Added extra checks to all hardware conversion functions so they align data when necessary before the conversion. This slows down the conversions somewhat but they're still much faster than the software conversions. ./test/dtypes.c By setting a constant at the top of the source you can test conversions where the data is aligned on various byte boundaries. By setting a constant at the top of the source you can simulate architectures that have alignment constraints on architectures that don't. Changed typo SIZEOF_LDOUBLE to SIZEOF_LONG_DOUBLE in a few places.
* [svn-r950] Changed the name of tohdr.c to ohdr.cRobb Matzke1998-11-251-1/+1
|
* [svn-r949] Changes since 19981124Robb Matzke1998-11-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
* [svn-r946] Changes since 19981121Robb Matzke1998-11-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Tconv.c With my poor eyesight I missed the definitions of SCHAR_MIN and SCHAR_MAX in <limits.h> and used CHAR_MIN and CHAR_MAX incorrectly. I changed all occurrences of the latter to the former and the new hardware integer type conversions now work on Irix. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5.c ./test/h5test.c Added a wrapper for HDsnprintf() that just calls sprintf() if snprintf() isn't available. ./MANIFEST Added Paul's new h5toh4 files.
* [svn-r944] Changes since 19981120Robb Matzke1998-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/Makefile.in ./test/shtype.c [REMOVED] Removed shtype.c because it was all commented out. Besides, these tests are done in dtypes.c now anyway. ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/unlink.c The tests that check the HDF5 API use the h5test support functions. For one thing, that means that you can specify the file driver that thay use by the HDF5_DRIVER environment variable. Possible values are: HDF5_DRIVER='sec2' Use read() and write() HDF5_DRIVER='stdio' Use fread() and fwrite() HDF5_DRIVER='core' Use malloc() and free() HDF5_DRIVER='split' Split meta and raw data HDF5_DRIVER='family N' Use file families with each member being N megabytes (N can be fractional, defaults to one). Some tests might fail for certain drivers: for instance, the mount and link tests fail for the `core' driver because they must be able to close and then reopen a file.
* [svn-r936] Changes since 19981119Robb Matzke1998-11-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
* [svn-r907] Changes since 19981111Robb Matzke1998-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
* [svn-r902] Added H5Snone.cQuincey Koziol1998-11-131-0/+1
|
* [svn-r859] Changes since 19981030Robb Matzke1998-11-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added new Pablo files HDF5record_RT.h and ProcIDs.h ./acconfig.h ./configure [REGENERATED] ./configure.in ./src/H5.c ./src/H5Vprivate.h ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5public.h ./test/big.c Added more configuration stuff for the Win32 environment. Removed all the #ifdef WIN32 from the source and replaced them with OS-independent stuff. Specifics follow: Check for non-Posix.1 `st_blocks' field in `struct stat' which is used by the big file test to decide if the file system supports holes. If the st_blocks field isn't present then we just skip the test. Configure checks for <io.h> <sys/resource.h> <sys/time.h> and <winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H, HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found. Configure checks whether both <sys/time.h> and <time.h> can be included and defines SYS_TIME_WITH_TIME if so. Otherwise include only <sys/time.h> or <time.h> even if both exist. Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the result or to zero if __int64 isn't defined. The source uses `long long' in preference to `__int64'. Removed null WIN32 definition for `inline' since such a definition already exists in H5config.h Protected gettimeofday() calls in debugging code with HAVE_GETTIMEOFDAY instead of WIN32. ./src/H5F.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.h ./src/H5P.c ./src/H5Tconv.c ./src/H5private.h Removed #include of system files from library source files and consolodated them into H5private.h where they're protected by various configuration macros (most of them were duplicated there already anyway). ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/overhead.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Protected system #include's with #ifdef's from H5config.h. Undefined NDEBUG since some of the tests rely on assert() to check return values. Removed WIN32 definitions for __unused__ since this can be controlled by the definition of HAVE_ATTRIBUTE in H5config.h ./test/testhdf5.h Removed the CLEAN_CMD definition because we no longer use it. Albert's cleanup() functions replaced it. ./test/fillval.c Initialized auto hid_t variables to fix warnings in error recovery code when data flow analysis is turned on in compilers. ./test/h5tools.c Initialized an auto variable to fix a compiler warning. ./test/chunk.c ./test/ragged.c The WIN32 had some unsigned variables changed to signed because the compiler generates warnings when coercing unsigned to double(?). I changed them back to unsigned because they really are unsigned quantities. If this the change was just to shut up extraneous warnings then perhaps a compiler flag can do the same; otherwise if the compiler generates bad code then we should supply a patch file instead messing up source code with bug work-arounds. ./src/H5detect.c Protected system #include's with #ifdef's from H5config.h thereby removing a WIN32. If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that `struct passwd' doesn't exist either (we don't really need it in that case). The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of `long long' or else `__int64' or else `long' depending on what's available. ./src/H5Flow.c ./src/H5Ofill.c Added __unused__ to some function arguments that aren't used when assertions are turned off. ./src/H5V.c Changed an auto variable name in some hand-inlined code to get rid of a warning about the variable shadowing a previous auto.
* [svn-r836] Added files:Frank Baker1998-10-301-17/+21
| | | | | | | | | | hdf5/doc/html/RM_H5I.html hdf5/doc/html/RM_H5R.html hdf5/doc/html/References.html Labelled all files in hdf5/doc/src/ as "do not distribute." Added hdf5/doc/html/DDL.html, but labelled as "do not distribute."
* [svn-r826] Added files ./tools/testfiles/*.Ruey-Hsia Li1998-10-291-5/+11
|
* [svn-r807] Added pablo file namesRobb Matzke1998-10-271-2/+14
|
* [svn-r795] Changes since 19981026Robb Matzke1998-10-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/th5s.h5 [NEW] ./test/th5s.c Added a test to make sure that creating a data space with too large a rank fails. Added a test to make sure that reading a file that has a dataset with a space with too large a rank fails. Actually, this one is a little weird: the code that reads the data space message assumes the space is scalar if the message cannot be read. Fortunately the layout message fails also, preventing the dataset from being opened. However, since the data type message is still visible h5ls will report that the object is a named data type. ./test/space_overflow.c [NEW] This is the little program that makes the th5s.h5 file. ./src/H5A.c ./src/H5R.c ./src/H5Sselect.c Updated trace info. ./src/H5Olayout.c ./src/H5Osdspace.c Added code to fail if the dimensionality is too large when decoding a layout or simple data space message. ./src/H5Oprivate.h Redefined H5O_LAYOUT_NDIMS in terms of H5S_MAX_RANK. ./src/H5P.c ./src/H5S.c Check for ndims>H5S_MAX_RANK in API function calls, added assert to internal functions. ./src/H5V.c Changed a `<' to an `<=' in an assert. ./test/flush2.c Includes stdlib.h for getenv(). ./tools/h5tools.c Able to handle up to H5S_MAX_RANK dimensions during output.
* [svn-r789] Changes since 19981023Robb Matzke1998-10-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/Makefile.in ./test/flush1.c [NEW] ./test/flush2.c [NEW] Test to see if calling H5Fflush() results in a consistent file. ./src/H5.c ./src/H5A.c ./src/H5D.c ./src/H5Fistore.c ./src/H5I.c ./src/H5S.c ./src/H5Shyper.c ./src/H5Sselect.c ./src/H5TB.c Changed comparisons against SUCCEED and FAIL to >=0 and <0 in about 15 places. ./src/H5.c ./src/H5V.c ./src/H5detect.c ./src/H5private.h ./src/H5public.h ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/external.c ./test/fillval.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Removed ^M from the end of lines inserted on broken OS's ;-) ./src/H5private.h Changed c++ comments to c comments. ./src/H5R.c Added tracing macros.
* [svn-r779] Changes since 19981022Robb Matzke1998-10-231-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./doc/html/study.html [DELETED] ./doc/html/study_1000x1000.gif [DELETED] ./doc/html/study_250x250.gif [DELETED] ./doc/html/study_499x499.gif [DELETED] ./doc/html/study_5000x1000.gif [DELETED] ./doc/html/study_500x500.gif [DELETED] ./doc/html/study_p1.gif [DELETED] ./doc/html/study_p1.obj [DELETED] Removed these old files -- the data was from before the chunk cache was implemented and therefore the whole file was pretty much garbage. ./MANIFEST ./doc/html/Chunking.html [NEW] ./doc/html/Chunk_f1.gif [NEW] ./doc/html/Chunk_f1.obj [NEW] ./doc/html/Chunk_f2.gif [NEW] ./doc/html/Chunk_f2.obj [NEW] ./doc/html/Chunk_f3.gif [NEW] ./doc/html/Chunk_f4.gif [NEW] ./doc/html/Chunk_f5.gif [NEW] ./doc/html/Chunk_f6.gif [NEW] ./doc/html/Chunk_f6.obj [NEW] New documentation for chunking. It's not quite complete but it gives a pretty good idea of some of the issues affecting performance.
* [svn-r761] Changes since 19981013Robb Matzke1998-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c Fixed a signed vs. unsigned comparison. ./src/H5D.c Setting a fill value of all zeros will cause the fill value to be written to the dataset instead of relying on the low-level file driver initializing unwritten areas with zero. ./src/H5D.c ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5O.c ./src/H5T.c More file mounting stuff. ./src/H5I.c Fixed a bug where trying to close an invalid object id caused a core dump. For instance, H5Gclose(-1). ./MANIFEST ./test/Makefile.in ./test/mount.c [NEW] Mounting tests. ./src/H5R.c Fixed a couple (herr_t)NULL casts.
* [svn-r755] Added reference test to manifest.Quincey Koziol1998-10-131-0/+1
|
* [svn-r741] Added H5R*.[ch] filesQuincey Koziol1998-10-071-0/+3
|
* [svn-r739] Switched ragged array "H5R" API to "H5RA" to make room for the ↵Quincey Koziol1998-10-061-3/+3
| | | | reference API.