summaryrefslogtreecommitdiffstats
path: root/Makefile.in
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r19408] In this revision the '/' after ${DESTDIR} wherever it occursLarry Knox2010-09-161-6/+16
| | | | | | | | | | | | | | | | | | | | has been removed. According to the official description of DESTDIR by Gnu at http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is prepended to the normal and complete install path that it precedes for the purpose of installing in a temporary directory which is useful for building rpms and other packages. The '/' after ${DESTDIR} will be followed by another '/' at the beginning of the normal install path. When DESTDIR is empty the path then begins with '//', which is incorrect and causes problems at least for Cygwin. The change made in config/commence.am affects many Makefile.*s when bin/reconfigure is run. EXAMPLEDIRs had to be corrected individually. Also the scripts to run examples after they are installed have checks added to see that the fortran and c++ directories are present before trying to run the scripts in them. Tested with h5committest on amani, heiwa and jam.
* [svn-r19371] Updated autoconf to version 2.6.7, libtool to version 2.2.10, ↵Larry Knox2010-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and m4 to version 1.4.14. Also added m4 directory for m4 macros according to autoconf suggestion. Tested with h5committest on amani, jam, and heiwa, and on linew. -This line, and those below, will be ignored-- M hdf5_1_8/test/Makefile.in A hdf5_1_8/m4 AM hdf5_1_8/m4/ltsugar.m4 AM hdf5_1_8/m4/libtool.m4 AM hdf5_1_8/m4/ltversion.m4 AM hdf5_1_8/m4/lt~obsolete.m4 AM hdf5_1_8/m4/ltoptions.m4 M hdf5_1_8/configure M hdf5_1_8/Makefile.in M hdf5_1_8/testpar/Makefile.in M hdf5_1_8/configure.in M hdf5_1_8/src/Makefile.in M hdf5_1_8/tools/Makefile.in M hdf5_1_8/tools/misc/Makefile.in M hdf5_1_8/tools/h5dump/Makefile.in M hdf5_1_8/tools/h5repack/Makefile.in M hdf5_1_8/tools/h5jam/Makefile.in M hdf5_1_8/tools/h5diff/Makefile.in M hdf5_1_8/tools/lib/Makefile.in M hdf5_1_8/tools/h5copy/Makefile.in M hdf5_1_8/tools/h5import/Makefile.in M hdf5_1_8/tools/h5stat/Makefile.in M hdf5_1_8/tools/h5ls/Makefile.in M hdf5_1_8/hl/test/Makefile.in M hdf5_1_8/hl/tools/Makefile.in M hdf5_1_8/hl/tools/gif2h5/Makefile.in M hdf5_1_8/hl/Makefile.in M hdf5_1_8/hl/src/Makefile.in M hdf5_1_8/hl/c++/test/Makefile.in M hdf5_1_8/hl/c++/Makefile.in M hdf5_1_8/hl/c++/src/Makefile.in M hdf5_1_8/hl/c++/examples/Makefile.in M hdf5_1_8/hl/fortran/test/Makefile.in M hdf5_1_8/hl/fortran/Makefile.in M hdf5_1_8/hl/fortran/src/Makefile.in M hdf5_1_8/hl/fortran/examples/Makefile.in M hdf5_1_8/hl/examples/Makefile.in M hdf5_1_8/config/commence.am M hdf5_1_8/MANIFEST M hdf5_1_8/c++/test/Makefile.in M hdf5_1_8/c++/Makefile.in M hdf5_1_8/c++/src/Makefile.in M hdf5_1_8/c++/examples/Makefile.in M hdf5_1_8/bin/ltmain.sh M hdf5_1_8/bin/reconfigure M hdf5_1_8/perform/Makefile.in M hdf5_1_8/fortran/test/Makefile.in M hdf5_1_8/fortran/testpar/Makefile.in M hdf5_1_8/fortran/Makefile.in M hdf5_1_8/fortran/src/Makefile.in M hdf5_1_8/fortran/examples/Makefile.in M hdf5_1_8/aclocal.m4 M hdf5_1_8/examples/Makefile.in
* [svn-r18836] Added code to config files, libhdf5.settings.in and ↵Larry Knox2010-05-171-0/+2
| | | | | | configure.in to add compiler version information for fortran and C++ in the settings file and the configure output for our common compilers on linux, solaris, and mac(gnu only). Tested: amani, jam, linew (h5committest) and with configure on these machines and tejeda.
* [svn-r18817] Added scripts to compile and run installed examples. The ↵Larry Knox2010-05-141-1/+1
| | | | | | scripts are installed with the examples, and there is one script to run the scripts for all hl examples and another to run the scripts for all the examples. Tested: amani, jam, linew (h5committest).
* [svn-r18779] Add ${DESTDIR} to scripts and Makefiles so that make ↵Larry Knox2010-05-121-5/+8
| | | | | | DESTDIR=<install directory> install, installcheck and uninstall is supported for installing examples, since they are now installed as part of make install. This was necessary for rpmbuilds, but should also be supported otherwise. Tested: amani, jam, linew with committest, rpmbuild on jam and amani.
* [svn-r18710] Purpose:Mike McGreevy2010-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Improve configure's large-file support control. Description: Modified configure to now attempt to add defines necessary for supporting largefiles on all systems, instead of solely on linux. This is in response to user requests to enable largefile support on Solaris by default, as well as to give extra control on AIX (instead of just jamming the necessary flag into the config files). The old --enable-linux-lfs flag is being deprecated in favor of the --enable-largefile flag (enabled by default), which can be used on all platforms. --disable-linux-lfs can still be used to disable largefile support (on linux) when the --enable-largefile flag is not specified. On systems where large files cannot be supported in this manner, configure will report as such. Tested: h5committest AIX (NCSA's blue_print machine) duty, liberty, and linew.
* [svn-r18701] ID 1853:Albert Cheng2010-05-041-0/+1
| | | | | | | | Added the configure option --enable-h5dump-packed-bits for the h5dump optional feature. Tested: Jam (default and --disable-h5dump-packed-bits).
* [svn-r18680] Added running make install-examples to make install. Make ↵Larry Knox2010-04-301-4/+5
| | | | install-examples will still install example files and make install will also install them.
* [svn-r18580] Purpose:Mike McGreevy2010-04-151-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Autotool Upgrade / Libtool Bug Fix Description: Updated autotools referenced in bin/reconfigure as follows: Autoconf 2.64 --> Autoconf 2.65 Automake 1.11 --> Automake 1.11.1 Libtool 2.2.6a --> Libtool 2.2.6b-mcg The referenced libtool version is a custom version of 2.2.6b. It has been tweaked to fix a bug in libtool that occurs when using PGI 10.0 compilers. A check incorrectly categorizes the C++ compiler as version 1.0 instead of 10.0, and the link line is subsequently set up incorrectly and fails to compile. A patch has been made available and will be included in the next release of libtool, but in the meantime I've applied the patch to a custom installation as indicated above. This bin/reconfigure now references the custom installation, and the resulting configure script will correctly categorize the PGI 10.0 C++ compiler. Ran bin/reconfigure to regenerate configure and makefiles. Tested: jam and amani with PGI 10.0 compilers. h5committest
* [svn-r18106] bug 1673:Albert Cheng2010-01-121-2/+2
| | | | | | | | | | | | | | The mixed use of RUNTEST (original) and RUNTESTS (new) caused confusion. E.g., the timings in test/ was still using the old $RUNTEST. It made more sense to use $RUNTEST which is used by the dejagnu feature of automake. So, I changed all $RUNTEST or $RUNTESTS to $RUNEXEC. config/commence.am & config/conclude.am are the two files that got changes. Also fixed an error in test/Makefile.am. The rest are changed by bin/reconfigure. Tested: h5committested.
* [svn-r17645] Purpose:Mike McGreevy2009-10-151-7/+14
| | | | | | | | | | | | | | | Merge from Trunk Description: Merging all of my CFLAGS-related changes from trunk to 1.8 This includes revision #s: 17616, 17625, 17627, 17639, and 17643. Tested: h5committest and some additional checks on our FreeBSD as well as NCSA's machines.
* [svn-r17439] Purpose:Mike McGreevy2009-08-311-46/+125
| | | | | | | | | | | | | | | | | | | | | | Updating autotools Description: Bring revisions 17345 and 17357 from trunk to 1.8, specifically: - Automake upgraded to 1.11 - Autoconf upgraded to 2.64 - bin/reconfigure script edited to use new versions (on jam), and run to generate new configure script and Makefile.in's. - configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings (in order to comply with new autoconf standard). - bin/install-sh script replaced with new version as provided by automake. Tested: - All issues on trunk were resolved, so only tested on jam and linew. Any other outliers should be caught by daily tests.
* [svn-r16793] Description:Mike McGreevy2009-04-201-3/+3
| | | | | | | | | | | | - Updated bin/reconfigure to use latest version of automake (1.10.2). Regenerated Makefile.in's by running bin/reconfigure. - Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran libraries. Tested: jam, liberty, smirom
* [svn-r16761] Fixed a simple typo in the echo statement in theAlbert Cheng2009-04-151-1/+1
| | | | | | | check-all-install actions. Tested: In jam by hand.
* [svn-r16755] bug fix (ID 1345):Albert Cheng2009-04-151-3/+3
| | | | | | | | Use environment variable instead of command parameter to test the install via $DESTDIR test. Tested: Jam by hand. (no h5committest which does not test this change.)
* [svn-r16750] New feature (Bug ID: 1345):Albert Cheng2009-04-141-1/+21
| | | | | | | | Added a Make target of check-all-install to test the correctness of installing via the prefix= or $DESTDIR options. Platforms tested: h5committested and jam serial mode. Then test check-all-install by hand.
* [svn-r16562] Purpose:Mike McGreevy2009-03-101-3/+3
| | | | | | | | | | | | | | | | | | Bug Fix Description: Fixing BZ #1381. The --includedir=DIR configure option, which is used to spceify installation location of C header files, did not work correctly as the path was hard-coded into config/commence.am. I'm presuming this is because an older version of automake didn't know where to put C header files. In any case, removing this line now defaults the includedir to the same directory that it is currently hard-coded to, and also fixes the configure flag which allows for customization of this value. Tested: jam, liberty
* [svn-r16519] merge 16518 from trunkPedro Vicente Nunes2009-02-261-0/+1
| | | | | | have 2 expected outputs for 2 h5ls runs depending if run on a big or little endian machine. Configure.in was modified to export a variable carrying endianess information to testh5ls.sh. This script then compares the current run with 2 expected outputs, one for a big-endian machine (linew was used to generate the output), other for little endian (jam was used to generate the output) the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other tested: jam, linew
* [svn-r15898] Purpose: Bug FixMike McGreevy2008-10-171-6/+1
| | | | | | | | | | | | | | | Description: Libtool wasn't working on linew because the script was not working with the Solaris Bourne shell. Libtool has built- in detection to ensure that it uses an appropriate shell, but our config/commence.am was hard coding this shell to be /bin/sh. Removing this line allows the shell to be picked up by configure, thus allowing libtool to use the correct shell on linew (bash). This was initially added to correct for a problem on an old machine (janus), so shoudn't be needed for machines we currently support. Tested: full make check install on kagiso and linew, compile only on smirom, duty, and liberty.
* [svn-r15881] Purpose: Bug Fixes, Libtool UpgradeMike McGreevy2008-10-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description: 1) configure now sets LD_LIBRARY_PATH before checking for presence of SZIP encoder, so user does not need to set this. The path is then saved and sent to Makefiles, and used when "make check-install" is invoked, so user doesn't need to set this manually. 2) Upgraded libtool to version 2.2.6a 3) Rearranged tools build order as h5dump depends on existence of h5diff and h5import. Since h5dump is a sister directory as opposed to a parent of either, it doesn't know about the build rules of these tools, so setting any sort of explicit dependency confuses automake as it won't know how to build the tools. Instead, setting CONFIG = ordered forces an in-order traversal of each tools subdirectory. (without it will also traverse in order by default, but this should prevent gmake's -j option from jumping ahead as well). 'make check install' should now be able to be invoked after 'configure' without causing a dependency failure. 4) Removed H5_HAVE_LARGE_HSIZET macro from vms/src/h5pubconf.h, as this macro has now been out of the code for some time. (vms pubconf needs to be updated manually, which is why it was still hanging around). Tested: kagiso, smirom, liberty Note: h5diff looks to be causing failures in h5copy and h5dump tools tests, though these were present before any of my changes. My changes only affect build order and configuration setup, and shouldn't prevent fixes for these failures coming in after this checkin. Other than these, tests pass fine.
* [svn-r15040] Purpose: Configure FixMike McGreevy2008-05-191-8/+1
| | | | | | | | Description: Removing make target 'make check-perform'. The extra target is unneeded because the tests don't take as long to run as initially anticipated, and can be lumped in with 'make check'. Tested: kagiso
* [svn-r15033] Purpose:Albert Cheng2008-05-191-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improvement. Description: src/libhdf5.settings was the initial configure summary and is installed. Then configure is changed to dump a summary of the configure settings to the output and also append it to src/libhdf5.settings. That created two different output formats and duplicated information. This is the initial attempt to clean up this confusion and unify the output format. It is decided to use the src/libhdf5.settings template as the unified means. This requires more macros symbols be defined. The following symbols are all related to generating the src/libhdf5.settings file. AC_SUBST(EXTERNAL_FILTERS) AC_SUBST(MPE) MPE=no AC_SUBST(STATIC_EXEC) STATIC_EXEC=no AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no AC_SUBST(FC) HDF_FORTRAN=no AC_SUBST(HDF_CXX) HDF_CXX=no AC_SUBST(CXX) HDF_CXX=no AC_SUBST(HDF5_HL) HDF5_HL=yes AC_SUBST(GPFS) GPFS=no AC_SUBST(LINUX_LFS) LINUX_LFS=no AC_SUBST(INSTRUMENT) INSTRUMENT=no AC_SUBST(CODESTACK) CODESTACK=no AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no AC_SUBST(DIRECT_VFD) DIRECT_VFD=no AC_SUBST(THREADSAFE) THREADSAFE=no AC_SUBST(STATIC_SHARED) AC_SUBST(enable_shared) AC_SUBST(enable_static) AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a` The src/libhdf5.settings.in has CONDITIONAL's added to it too. The untrue conditions turned into a "#" and these lines are cleaned by the post processing script. Platform tested: h5committest on kagiso, smirom and linew. (smirom had failures not due to my changes.)
* [svn-r15006] Purpose: configure cleanupMike McGreevy2008-05-151-1/+0
| | | | | | | Description: cleaning up configure related to removal of --disable-hsizet flag, which we no longer support. Tested: kagiso
* [svn-r14968] Purpose: Bug Fix (Bug 1144)Mike McGreevy2008-05-121-0/+7
| | | | | | | | | | | | | Description: Tests in perform directory were never getting run, and h5perf* programs were not being installed. Solution: Added another build option, 'make check-perform', which runs the tests in the perform directory. Also modified the Makefiles in the perform directory to install (with 'make install') h5perf when parallel is enabled, and h5perf and h5perf_serial when parallel is disabled Tested: kagiso, smirom, linew
* [svn-r14824] Purpose: Updating HDF5 1.8 to use automake 1.10.1 and ↵Mike McGreevy2008-04-101-23/+33
| | | | | | | | | | | | | | | | | | libtool 2.2 Description: Updated bin/reconfigure script to reflect the new versions of libtool and automake in the /home1/packages/ directory. Rearranged configure.in script. For some reason, when using libtool 2.2, the libtool script doesn't generate until later in the configuration process, so I had to move a test that parsed through the libtool script to a point after where it was actually being generated. Ran libtoolize on the project, and ran bin/reconfigure to regenerate configure and Makefile.in's throughout. Tested: kagiso, smirom, linew, tg-login
* [svn-r14402] Description:Quincey Koziol2008-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add work-around to allow reading files that were produced with a buggy earlier version of the library, which could create objects with the wrong object header message count. There is now a configure flag "--enable-strict-format-checks" which triggers a failure on reading a file with this sort of corruption (when enabled) and allows the object to be read (when disabled). The default value for the "strict-format-checks" flag is yes when the "debug" flag is enabled and no when the "debug" flag is disabled. Note that if strict format checks are disabled (allowing objects with this particular kind of corruption to be read) and the file is opened with write access, the library will re-write the object header for the corrupt object with the correct # of object header messages. This closes bugzilla bug #1010. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
* [svn-r13972] Description:Quincey Koziol2007-07-131-0/+1
| | | | | | | | | Add --with-default-api-version configure flag. Tested on: Mac OS X/32 10.4.10 (amazon) FreeBSD/32 6.2 (duty) Linux/32 2.6 (kagiso)
* [svn-r13971] Description:Quincey Koziol2007-07-121-0/+1
| | | | | | | | | | | | | | Add --enable-deprecated-symbols configure option, to allow users to remove deprecated public API symbols at configure time. Add bin/make_vers script to bin/reconfigure actions. Run bin/reconfigure to regenerate autotool components. Tested on: Mac OS X/32 10.4.10 (amazon) FreeBSD/32 6.2 (duty) Linux/32 2.6 (kagiso)
* [svn-r13928] Purpose: 1) Moving H5_CXX_HAVE_OFFSETOF macro to ↵Mike McGreevy2007-06-291-2/+1
| | | | | | | | | | src/H5pubconf.h file. 2) Removing configuration of c++/src/H5cxx_pubconf.h file. Reasoning: the additional pubconf file caused compilation complications, this is cleaner. Tested: kagiso, smirom
* [svn-r13925] Purpose: intermediate checkin for offsetof fix for PGI compiler.Mike McGreevy2007-06-281-1/+2
| | | | | | | | | | Description: added new configuration to generate a pubconf file in the c++/src directory, H5cxx_pubconf.h. When C++ compiler recognizes 'offsetof', the macro H5_CXX_HAVE_OFFSETOF is defined in the new pubconf file. tested: kagiso, smirom
* [svn-r13846] Purpose: To remove changes from version #13839 (regarding ↵Mike McGreevy2007-06-081-1/+0
| | | | | | | | DEFAULT_VFD). Description: Changes made during this checkin need to be greatly modified, so I'm removing them now rather than leaving them in and fixing them later.
* [svn-r13839] Purpose: creation of a DEFAULT_VFD macro in the ↵Mike McGreevy2007-06-071-0/+1
| | | | | | | | | | | test/Makefile. Description: a new configure flag has been created that will now set a macro in the test/Makefile. The flag is with-default-vfd=. When set to a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro DEFAULT_VFD will hold this value. Tested: kagiso, smirom, linew
* [svn-r13829] Some systems (only SGI Altix ProPack 4 discovered so far) ↵Raymond Lu2007-06-021-0/+1
| | | | | | | | | | | | doesn't return correct file size from MPI_File_get_size. Bypass this problem by replacing it with stat. Add an option --disable-mpi-size in configure to indicate this function doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong file size, print out a warning. Tested on kagiso (parallel) because already tested the same change to v1.6 on several platforms (kagiso, cobalt, copper, and sol).
* [svn-r13815] Description:Quincey Koziol2007-05-291-0/+2
| | | | Regenerate configuration files after latest checkin
* [svn-r13616] This check-in updates the bin/reconfigure file to point to the ↵Mike McGreevy2007-04-091-71/+63
| | | | | | | | most recent versions of the autotools. Updated autotool versions are: autoconf 2.61, automake 1.10.0, and libtool 1.5.22. Tested on kagiso.
* [svn-r13418] Cleaned up some old paths in config/commence.am and removed ↵James Laird2007-02-271-7/+7
| | | | | | | | some comments in the template file config/Makefile.am.blank. This is just a cleanup checkin. Tested on kagiso.
* [svn-r13379] Added 'make help' target. This actually runs a script, ↵James Laird2007-02-231-1/+4
| | | | | | | | bin/makehelp (formatting the output in the makefile was pretty hard). Tested that make still works on kagiso; no code changes at all.
* [svn-r13365] Bug fix.Albert Cheng2007-02-211-13/+0
| | | | | | | | | | | | Description: Multiple copies of Copyright appeared in Makefile.in. This was due to automake copying the copyright right in the included files such as config/commence.am. Solution: Automake treats double hashes as comments and does not copy them to Makefile.in. Changed all the copyright notices in config/*.am to use double hashes for the Copyright right notice. Tested: kagiso via bin/reconfigure.
* [svn-r13359] Fixed a bug where the -shlib flag for h5cc would end up on the ↵James Laird2007-02-201-5/+18
| | | | | | | | Dependency line in the Makefile. Makefile change only. Tested on kagiso, to be used to test on cobalt.
* [svn-r13264] Updated Makefile.am with new THG copyright notice.Albert Cheng2007-02-071-2/+3
| | | | Ran reconfigure to generate the Makefile.in files.
* [svn-r13181] Added a configure check to prevent a failure on Cygwin.James Laird2007-01-231-1/+1
| | | | | | | | | | | | | | It seems that while Cygwin supports the time command, it has trouble with the syntax srcdir="../../hdf5/test" time ./testhdf5 and complains. The solution is to test the above case in configure and not to use the time command if it fails; Cygwin is fine with srcdir="../../hdf5/test" ./testhdf5 Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility problem since every platform but Cygwin is already fine with the current syntax.
* [svn-r12929] Hopefully this really is a fix for the tg-login errors.James Laird2006-11-161-1/+1
| | | | | | | | | | | The version of libtool used by HDF5 isn't directly affected by the reconfigure script; instead, libtoolize --force must be used by hand. Libtool was the source of the problem, so rolling its version back to 1.5.14 should solve the issue (at least temporarily). Reconfigure should still work on both heping and kagiso. Tested on heping, kagiso, and tg-login3.
* [svn-r12911] Backed up to previous versions of automake and libtool. ↵James Laird2006-11-141-1/+1
| | | | | | | | Hopefully this will fix issues on tg-login3. bin/reconfigure should still work on both heping/mir and kagiso.
* [svn-r12887] A fix for linking issues.James Laird2006-11-101-0/+1
| | | | | | | | | | | | Should disable linking against shared libraries in Fortran for compilers that don't support shared libraries. Should also fix problem when the wrong Fortran file extension was specified. If these changes don't solve the Daily Test issues, I'll look at backing out the autotool version change until I have time to fix them. Tested on heping, kagiso, juniper.
* [svn-r12882] Changed bin/reconfigure to work on kagiso as well as on AFS ↵James Laird2006-11-081-5/+9
| | | | | | | | Linux machines. Updated to the latest versions of autotools. Tested on kagiso, heping, and juniper. Let me know if you have any problems.
* [svn-r12741] Added support for direct I/O to check-vfd. The direct VFD is ↵James Laird2006-10-101-2/+2
| | | | | | | | | | only tested if it is enabled. Added Direct VFD status to the configure summary. Removed a line left over from pablo support. Oops!
* [svn-r12715] Incorporated a user-submitted patch to better detect the 'tr' ↵James Laird2006-10-031-0/+1
| | | | | | | | | | | | utility and quote its arguments. Also checks for the 'socket' library on Solaris. If this patch passes the Daily Tests and makes the user happy, I'll port it back to the 1.6 branch. Tested on mir and sol.
* [svn-r12668] Description:Quincey Koziol2006-09-151-3/+3
| | | | | | | Re-run 'bin/reconfigure' script after recent checkins Tested on: none - shouldn't have any affect on compilation
* [svn-r12519] Fixed "make check-vfd"James Laird2006-07-311-0/+9
| | | | | | | | | | "make check-vfd" will now run all tests in the test directory with different file drivers (at least, all of those tests that use the testing framework's FAPL). Tests that fail will be skipped. This is not a perfect fix, but is better than nothing. Along with this change, check-vfd should be added to the Daily Tests.
* [svn-r12431] Purpose:James Laird2006-06-211-15/+5
| | | | | | | | | | | | | | Configuration feature Description: 'make install' now tests both static and shared libraries if both are installed. Solution: Previously, shared libraries were only tested when static libraries were not installed. Also cleaned up line in commence.am that was including HL library in all Makefiles. Platforms tested: mir (Makefile change only)
generated by cgit v0.12 at 2024-07-16 15:14:39 (GMT)