summaryrefslogtreecommitdiffstats
path: root/bin
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r2106] Changed the BASEDIR name to the form of $HOME/snapshots-${H5VERSION}Albert Cheng2000-04-101-1/+2
| | | | | | so that it is the same as the released version and allows easy appendix of version number. For the development branch, $H5VERSION is just "hdf5", representing the current version of the main=truck.
* [svn-r2049] Added the "clean" and "distclean" option for cleaning the test ↵Albert Cheng2000-03-231-0/+35
| | | | | | directory. This would help clean disk usage after the daily test is done.
* [svn-r2024] Added comments why the replacement of PREVIOUS should process evenAlbert Cheng2000-03-131-0/+3
| | | | if the overall release process has an error.
* [svn-r1984] Use one big cat to the help message (instead of the old way of echo)Albert Cheng2000-02-221-23/+29
| | | | because the messages are getting really big (my fault).
* [svn-r1983] Added two new options.Albert Cheng2000-02-221-9/+44
| | | | | | | | | | srcdirname <dir>: Use <dir> as the srcdir testing directory if srcdir is choosen. If <dir> starts with '-', it is append to the default name E.g., "snapshot srcdir srcdirname -xx" uses hostname-xx [Default is hostname] op-configure <option>: Pass <option> to the configure command
* [svn-r1981] Make sure new file created in the FTP area have all readiable bitsAlbert Cheng2000-02-221-0/+2
| | | | | on. This does not dictate the accessibility at the NCSA FTP sites which use AFS ACL. Just to make it complete.
* [svn-r1975] Purpose:Albert Cheng2000-02-181-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration improvement Problem: Arabica has a zlib library that is a dynamic lib in /usr/ncsa/lib. Binary generated would fail to run with a missig libz.so complain if /usr/ncsa/lib is not in $LD_LIBRARY_PATH. This exposed the problem that if the binary is linked with -L$mylibpath -lxyz where libxyz is a dynamic type, the binary can't run if $mylibpath is not in $LD_LIBRARY_PATH (or equivalent) or as part of the system default library paths (e.g., /usr/lib, /usr/local/lib). This problem also caused failures during configure (when trying to see what format to print long long) and during H5detect. The base cause is because libtool does not "transfer" the knowledge of -L$mylibpath to the wrapper file its mode=link generates. Solution: bin/ltmain.sh: Changed it so that it transfers the libpaths from -Llibpaths to the wrapper generated. I used the already defined variable finalize_shlibpath. Not sure it is correct to use it this way. Need to check on this. configure.in: Put in a patch to transfer information from LDFLAGS to LD_LIBRARY_PATH right before the AC_TRY_RUN. The above fix for ltmain.sh does not work here because libtool is generated later than this point. There should be a cleaner way to do this. Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. commence.in: Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. Makefile.in: Another patch of LDFLAGS to LD_LIBRARY_PATH because I could not make it to generate H5detect in the wrapper form of libtool. Need to make it to use the libtool correctly. Later. Platform tested: arabica (solaris 2.7) baldric (solaris 2.6)
* [svn-r1938] Print a message when all is well.Albert Cheng2000-01-071-1/+2
|
* [svn-r1935] A minor editing of the help messages.Albert Cheng2000-01-071-2/+2
|
* [svn-r1929] Added the srcdir option to support concurrent tests by differentAlbert Cheng2000-01-051-14/+32
| | | | | | | | | hosts. Below is the help output for srcdir. srcdir: Use srcdir option (does not imply other commands)" "snapshot srcdir" is equivalent to "snapshot srcdir all" "snapshot srcdir checkout" is equivalent to "snapshot checkout" Also used shell variables to hold directory paths for easier maintenance.
* [svn-r1855] Use the user MAKE if that has been set.Albert Cheng1999-12-031-3/+6
|
* [svn-r1829] Did a make distclean in the test stage to clean away previous tests.Albert Cheng1999-11-041-1/+10
| | | | Changed _test to check which is the proper name for the testing target.
* [svn-r1826] Got rid of old commented out commands.Albert Cheng1999-11-041-10/+5
| | | | Added uname to show host information automatically.
* [svn-r1806] * 1999-11-02Robb Matzke1999-11-021-1/+1
| | | | | | | | | | | | | ** bin/rpmsync ** config/depend1.in Tweaks for versions of `make' that can't search directories. ** examples/Dependencies ** src/Dependencies ** test/Dependencies ** testpar/Dependencies ** tools/Dependencies Regenerated all these with more complete path names.
* [svn-r1802] Changes since 19991019Robb Matzke1999-11-012-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
* [svn-r1791] Moved the MANIFEST checking to a separate command file ↵Albert Cheng1999-10-262-42/+49
| | | | | | (chkmanifest) so that it can be invoked individually.
* [svn-r1790] Removed the tag of the snapshot version. The tagging created a longAlbert Cheng1999-10-251-1/+1
| | | | list of tags no one ever used.
* [svn-r1753] Changes since 19991007Robb Matzke1999-10-151-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./src/H5config.h.in [REGENERATED] The /usr/ncsa/{include,lib} directories are only added if they actually exist. This fixes a warning on some systems. Checks for the <pdb.h> header file and also for either the PDB or Silo library, and if found prepares to compile the pdb2hdf program. ./config/distdep Relative path names for include files are changed to base names since the makefile contains the logic for searching and since it's likely that building the .distdep files happed from a location other than where they would be used in the file system. ./config/conclude.in Fixed shell errors when `for' loops iterate over nothing for the `uninstall' target. ./src/H5D.c ./src/H5Oefl.c File names for the external files are added to the heap when the dataset is created instead of when the object header is written. This fixes a rare infinite recursion bug. ./src/H5FD.c ./src/H5FDpublic.h Optimization to the free list causes H5FD_alloc() usage to go from >10 seconds to <0.4 second for one example (converting a 30MB equation of state file from PDB to HDF5 format). The optimization is to simply keep track of the largest item in the free list and not search the free list when the largest item is not big enough to satisfy the request. ./src/H5FDcore.c ./src/H5FDcore.h ./test/h5test.c If the `backing_store' property is true then a flush causes the entire contents of memory to be written to the specified file. This is in preparation for the ASCI/red optimizations and is currently tested by the pdb2hdf `--cached' switch. ./src/H5Odtypes.c Wrapped three long lines. ./tools/Makefile.in ./tools/pdb2hdf.c [NEW] A PDB-to-HDF5 translator. It only translates meta data -- the resulting HDF5 points into the PDB file for the raw data.
* [svn-r1700] Changed names of files to better reflect their purposes.Albert Cheng1999-09-302-0/+146
| | | | | | | | | INSTALL.ascired: Becomes INSTALL_TFLOPS. INSTALL_parallel.ascired: Becomes bin/config_para_tflops.sh INSTALL.ibm.sp.parallel: Becomes bin/config_para_ibm_sp.sh
* [svn-r1672] bin/ltconfig:Albert Cheng1999-09-281-1/+1
| | | | | | | | | | | | | ltconfig used just an empty source file to test the share lib compiler options. SUNSpro CC returns succeed though it issues a warning too. ltconfig did not like the warning. Changed it to test with a file containing a simple dummy program. Platform tested: solaris 2.6 and 2.7 config/solaris2.x: Changed default compiler to "cc" now that Sunpro CC can produce static and shared codes correctly. Also added -s to PROD_CFLAGS to produce leaner binary files.
* [svn-r1651] Fold in J90 changesQuincey Koziol1999-09-241-1/+3
|
* [svn-r1643] Tweaks to run on baldric better.Quincey Koziol1999-09-221-4/+8
|
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1561] Appranantely, "tail -n +2" is not recognized by a version of tail inAlbert Cheng1999-08-021-1/+1
| | | | Baldric (solaris 2.6). Changed it to "tail +2l".
* [svn-r1514] ./bin/release [1.2, 1.3]Robb Matzke1999-07-191-2/+6
| | | | | | The SunOS 5.6 version of `sed' must have slashes as delimiters so I made sure that's all that's used in this script even though it makes one pattern almost unreadable.
* [svn-r1474] ./bin/h5vers [1.3]Robb Matzke1999-07-132-2/+8
| | | | | | | | | Added `use strict' and declared some variables. ./bin/trace [1.2, 1.3] Added definitions for H5D_operator_t, H5MM_allocate_t, and H5MM_free_t and regenerated tracing calls for the affected API functions.
* [svn-r1445] Fixed regular expression in sedQuincey Koziol1999-07-071-1/+1
|
* [svn-r1436] Made perl script more portable.Quincey Koziol1999-07-061-1/+5
|
* [svn-r1430] Fixed some dumb typos.Albert Cheng1999-07-061-3/+3
|
* [svn-r1424] Pulled CVS checkout codes to form a new partition of checkout thatAlbert Cheng1999-07-061-18/+36
| | | | | | | | does cvs checkout only. Moved the "make distclean" code from the "test" to the "release" part. (A distclean should definitely be applied as part of the release command. Also, test might fail for other silly reason, like AFS temporary out. The distclean blew away the option of trying the tests by hand.
* [svn-r1421] Divide the whole script into two parts, test and release, so ↵Albert Cheng1999-07-041-53/+139
| | | | | | | | | | | | | | | | that the two tasks can be done selectively. This is mainly to allow doing the test without running the release part automatically. After this is tested out more to work fine, the "cvs checkout" part will be pulled out also, so that it is possible to stage the cvs checkout during the daytime when user is around to provide the AFS token. The test part can be done at night by cron, provided the latest source has been "staged". Following a successful test, the user can do the release part by hand later, again with AFS tokens. Also added options for using different locations of HDF4 library and the ARCHIVE areas. Making it useful for different machines setup.
* [svn-r1358] Update the ftp site to the AFS area.Albert Cheng1999-06-171-1/+4
| | | | Added in the exit-on-error mode to abort cvs commit if errors encountered.
* [svn-r1354] Robb Matzke1999-06-162-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19990615 ---------------------- ./README Version number synchronized with library. ./bin/h5vers If the version number of the library is changed then the first line of the README file is also changed to something like This is hdf5-1.2.3 currently under development The `release' script (which also gets run by `snapshot') changes that line to include the release date but keeps the version number the same. The net effect is that the version numbers in README and H5public.h should now always stay synchronized. ./bin/snapshot The CVS checkin comment includes the version number for the snapshot that was just made. ./tools/testh5toh4 Changed `*-SKIP-*' to `-SKIP-' to be consistent with the other tests.
* [svn-r1345] Changed it to use perl to execute the perl scripts than toAlbert Cheng1999-06-151-7/+5
| | | | | rely on invoking the script files themselves. Tested on fuga (IRIX 6.5).
* [svn-r1313] Neither SGI nor Solaris allows an empty 'then' body.Albert Cheng1999-06-081-5/+2
| | | | | Changed it to conditional statements. Tested fine in SGI and Solaris.
* [svn-r1292] Changes since 19990430Robb Matzke1999-06-021-6/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- Remove changes from CVS ./bin/release Added a `--nocheck' switch which causes the script to not check the contents of the MANIFEST file against CVS. This is sometimes useful when you need to make a quick snapshot but the MANIFEST file is not quite up to date. ./src/H5D.c Removed warnings for unused variables ./src/H5Fprivate.h Removed the WIN32 definition for `uint' and changed the data type for `eof_written' from `uint' to `uintn'. Shouldn't this really be `hbool_t'? ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./test/dtypes.c ./doc/html/H5.format.html Added support for bitfields and opaque data types.
* [svn-r1240] Changes since 19990427Robb Matzke1999-04-302-30/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5ls.c Added a `--address' (`-a') switch which causes h5ls to display file addresses for raw data. For contiguous datasets it's just a nice simple number, but for chunked datasets it's a list of logical dataset coordinates, file addresses, filter masks, and storage sizes. Changed `--dump' switch to `--data'. ./src/H5D.c ./src/H5F.c ./src/H5Fprivate.h Enhanced the indexed-storage B-tree iterator so it can dump raw data addresses (and other info) to the standard error stream. Added H5Ddebug() so h5ls has a way to dump addresses for datasets. I'm not sure what else this API function should do, so I think we should discuss it before we document it. So far, h5ls is the only thing that uses it, and we can easily change that. ./src/H5Tconv.c ./test/dtypes.c Finally had a chance to verify Paul's H5T_conv_s_s (general string to string conversions) bug fixes and incorporate them into H5T_conv_f_f (general floating-point to floating-point conversions) and H5T_conv_i_i (general integer to integer conversons). Thanks Paul. ./src/H5D.c ./src/H5S.c ./src/H5Sprivate.h Added performance timers around data space read and write callbacks. They were already there for the gather/scatter callbacks. The timings for read/write callbacks are displayed along with gather/scatter when data space debugging is turned on. ./bin/iostats Updated to print totals. Added a `--fast' option that doesn't do any output except the totals and is much faster. ./bin/trace Changed __unused__ to UNUSED to match source code. ./config/gnu-flags Updated error message for pgcc. I've sent bug reports to the pgcc people but the new version still has the same bug. ./configure.in ./config/conclude.in ./config/depend.in Fixed dependencies for non-GNU makes when run in a directory other than the hdf5 source tree. Updated GNU `make dep' rules to copy the distributed dependencies for non-GNU makes into the source tree when run in some other directory.
* [svn-r1175] Added the recognition of the tflops (Intel Red) platform.Albert Cheng1999-04-081-0/+4
|
* [svn-r1121] Added Cray T3E recognition. OS named as unicosmk.Albert Cheng1999-03-092-0/+7
|
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-025-149/+4493
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
* [svn-r1108] Changes since 19990225Robb Matzke1999-02-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added warnings and a disclaimer about GNU, DEC, Irix64, and NT compilers that generate incorrect machine code. ./configure.in ./src/H5private.h Detects and includes <sys/param.h> which is needed on FreeBSD before <sys/proc.h> even though we only really using anything from <sys/proc.h> on the DEC Alpha. ./config/irix64 Turned off warnings for duplicate definitions from the linker because -lnsl on irix has the same stuff in it as -lc. ./config/irix6.x Split up the CC and CFLAGS settings like with irix64 so that compilers besides `-n32' can be used. ./bin/snapshot The snapshots are tagged with names like hdf5-1_1_52 which is similar to the way the releases are tagged (cvs doesn't allow dots in tags). ./test/dtypes.c ./src/H5private.h ./src/H5Tconv.c Fixed some alignment violations on the DEC when using high optimization levels. The DEC incorrectly optimizes certain memcpy() and memmove() calls when the source argument is not word aligned if the call looks like it's copying an atomic data type. ./test/hyperslab Worked around code generation bugs in the Irix64 Mongoose 7.00 compiler by casting some `unsigned long' values to `unsigned' in an expression. ./src/H5Ocomp.c Fixed a place where %d was used to print a size_t.
* [svn-r1105] Removed flag which was stopping the HDF4 library from being ↵Quincey Koziol1999-02-251-1/+1
| | | | | | tested, now that I've rolled back the installed library on hawkwind to HDF4.1r2.
* [svn-r1085] Added platform T3E.Albert Cheng1999-02-192-0/+7
|
* [svn-r1080] Disabled detection of hdf4 during the configuration because hawkwindRobb Matzke1999-02-181-1/+8
| | | | has old enough hdf4 libraries that the h5toh4 test always fails.
* [svn-r1065] Changes since 19990121Robb Matzke1999-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5public.h ./src/H5Omtime.c Check for <stddef.h> Checks for `__tm_gmtoff' in `struct tm' because old versions of GNU libc are different than recent versions. This fixes the failing mtime test. ./bin/config.guess ./config/freebsd2.2.7 [REMOVED] ./config/freebsd [ADDED] Changed the name so it works with all versions of FreeBSD. ./src/H5.c Moved H5F after H5T and H5G in H5_term_library() to satisfy dependencies. ./src/H5G.c Fixed a bug that caused H5Gcreate() to fail if the group name had trailing slashes. ./src/H5Gpublic.h Changed `group_name' to `name' in a prototype. ./src/Makefile.in Dynamic library on Linux, but needs for work to be generally useful. ./src/H5HG.c ./src/H5HGprivate.h Fixed alignment problems when using old GCC compilers (like the one shipped with RedHad Linux). ./tools/h5ls.c Fixed a bug where the contents of the root group could be listed twice if there was a link back to the root group. Similarly for groups that are mentioned on the command line. Fixed a bug where unknown types were printed with a random type class number. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h Fixed O(log N) conversion bugs.
* [svn-r1037] All IRIX (old 32bit OS) version 6.x can use the same configuration.Albert Cheng1999-01-291-1/+4
| | | | Replaced irix6.2 by irix6.x.
* [svn-r1009] *** empty log message ***Robb Matzke1999-01-071-1/+1
|
* [svn-r971] Changes since 19981214Robb Matzke1998-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added warning that enabling debugging code can adversely affect performance even when the debugging isn't turned on at run-time. Performance testing shows that under certain circumstances (like data type conversions of compound types) the H5_timer functions, although only a few lines each, contribute a fairly large percent to the execution time. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h Improved the H5Tunregister() function to make unregistering more flexible. It takes the same arguments as H5Tregister() but also accepts wild cards. All conversion functions that match the H5Tunregister() search criteria are removed from the global type conversion table. The H5Tregister_hard() and H5Tregister_soft() were combined into a single function called H5Tregister() which is the counterpart to H5Tunregister(). A new `persistence' argument was added to differentiate between the two types of conversion functions. The application is allowed to register a hard conversion function for the no-op conversion path although the library isn't obligated to call it (it usually does). This is mostly for completeness, but the application might use it to help determine if the raw data pipeline was able to use the optimized path for the case when no type conversion is necessary. The library doesn't allow this path to be unregistered although the application can redefine it as often as it likes. Fixed the type conversion tables in preparation for MT-safety and to fix previosly-known design bugs wrt. unregistering conversion functions or changing the C function associated with a conversion path. The MT-safety stuff is documented in a separate white paper. Increased the conversion function debugging name from 9 characters to 31 characters so the output can be more descriptive. Moved conversion path statistics from the H5T_cdata_t member into the conversion path itself. This makes H5T_cdata_t contain only application-visible data structures. ./src/H5A.c ./src/H5D.c ./src/H5Ofill.c ./src/H5P.c ./src/H5T.c Improved the way type conversion functions are called so the caller doesn't have to check for data type debugging and increment type conversion timers and statistics. Changed check for no-op conversion since it is now application-definable and there may even be more than one definition at a time in a multi-threaded application (one thread might be using the no-op conversion path when some other thread changes its definition -- the first thread still sees the original defintion until it's done with the operation). ./doc/html/Datatypes.html Updated the user guide to reflect the changes to data type conversion registration functions. ./bin/trace ./src/H5.c Added tracing support for the new H5T_pers_t data type. ./test/dtypes.c Added printf to display alignment value if non-aligned data types are being tested. ./test/h5test.c Modified the H5Tunregister() calls to use the new arguments. All 94 of those calls can be replaced by a single call to the new H5Tunregister() function. ./src/H5.c Added HAVE_GETTIMEOFDAY around an auto variable and initialized the elapsed time to zero when gettimeofday() is not available. ./src/H5F.c ./src/H5Fprivate.h ./src/H5P.c Added an H5*_init() functions which do the same thing as H5*_init_interface() but can be called from other packages and don't do anything if the interface is already initialized. This fixes a couple memory leaks in applications that repeatedly close and open the library with H5close(). ./src/H5Tconv.c Optimized some data alignment code in the hardware conversion functions. Hardware conversions accumulate statistics about source and destination data alignment and print that information when the conversion function is unregistered (usually when the application exits) if data type debugging is compiled into the library and enabled at run-time. The conversion caching was cleaned up for the compound data type conversion function. It now caches conversion paths in a manner that will be MT-safe and is much simpler than the old method. Also cleaned up some array index maps. ./src/H5detect.c Fixd mispelling of alingemnt. ./src/H5private.h Changed `TRUE' to `1' in assignment to interface_initialize_g in FUNC_ENTER macro definition. ./tools/testh5dump.sh Completely rewritten to make it shorter, better documented, and conforming to most of the other test outputs. The comparison of the actual output with the expected output is insensitive to differences in white space. The test now passes for the first time on Linux where the output width wasn't as expected but the output was otherwise correct. ./tools/testfiles/tall-1.ddl ./tools/testfiles/tall-2.ddl ./tools/testfiles/tall-3.ddl ./tools/testfiles/tattr-1.ddl ./tools/testfiles/tattr-2.ddl ./tools/testfiles/tattr-3.ddl ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tcomp-1.ddl ./tools/testfiles/tcomp-2.ddl ./tools/testfiles/tcomp-3.ddl ./tools/testfiles/tcomp-4.ddl ./tools/testfiles/tdset-1.ddl ./tools/testfiles/tdset-2.ddl ./tools/testfiles/tdset-3.ddl ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tgroup-1.ddl ./tools/testfiles/tgroup-2.ddl ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tlink-1.ddl ./tools/testfiles/tlink-2.ddl ./tools/testfiles/tlink-3.ddl ./tools/testfiles/tlink-4.ddl ./tools/testfiles/tlink-5.ddl ./tools/testfiles/tslink-1.ddl ./tools/testfiles/tslink-2.ddl Changed `../h5dump' to just `h5dump'. ./config/alpha-dec-osf4.0 Added more warning and optimization switches to the native compiler.
* [svn-r914] Changes since 19981113Robb Matzke1998-11-161-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in The Makefile $TESTS variable has finally been split into $TEST_PROGS and $TEST_SCRIPTS with the latter being the names of shell scripts that need to be run with `/bin/sh'. Now we don't have to copy each shell script before we run it. NOTE: THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE. ./src/Makefile.in Added H5Snone.c to the source list. ./src/H5G.c Plugged a memory leak by emptying the object type "isa" table when the library is closed. ./src/H5Tconv.c ./src/H5Tpkg.h Added 48 new type functions to take advantage of hardware for integer type conversions. These functions are not registered in the conversion table yet because I haven't fully tested them. ./src/H5Tpkg.h Removed __unused__ qualifiers from prototypes.
* [svn-r876] Changes since 19981102Robb Matzke1998-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/snapshot Made same fix as for the release script yesterday. ./src/H5D.c ./src/H5Dprivate.h ./src/H5G.c ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5O.c ./src/H5Oprivate.h ./src/H5RA.c ./src/H5RAprivate.h ./src/H5T.c ./src/H5Tprivate.h Improved object type checking. Instead of determining the object type by trying to open each of the possible types, we keep a table of associations between object type number (like H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa' function that returns true if the object header has the right messages to make the object a particular type. This mechanism also allows specialization of object types by permitting an object to satisfy more than one `isa' function. Added `isa' functions for groups, datasets, ragged arrays, and committed data types. ./src/H5config.h.in Added HAVE_STAT_ST_BLOCKS. I thought this had already been added, but apparently not. ./tools/h5ls.c Removed system include files since they're already included by H5private.h and since I wasn't including them portably anyway. By default, 1-byte integer types are printed as integer values instead of ASCII characters. However, the `-s' or `--string' command-line switch causes the data to be interpretted as ASCII. String data types are always printed as character data. Ragged arrays are now identified as ragged arrays and h5ls doesn't descend into the group automatically. This uses the new object type specialization stuff. ./tools/h5tools.c ./tools/h5tools.h Added the ability to print 1-byte integer types as either ASCII or numeric data instead of always ASCII. The default is to print as numeric data.
generated by cgit v0.12 at 2024-11-17 17:13:33 (GMT)