summaryrefslogtreecommitdiffstats
path: root/config/irix5.x
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r11614] Frank Baker2005-10-281-1/+1
| | | | | | | Description: Correct typo in copyright notice. Platforms tested: Ran hdf5/bin/chkcopyright without errors.
* [svn-r11592] Frank Baker2005-10-211-0/+13
| | | | | | | | Description: Add source code copyright notice; comment symbols vary by type of file. Platforms tested: No changes that should cause any problems. Nonetheless, the tree will be checked out fresh and tests run immediately post-commit.
* [svn-r11311] Purpose: New features.Raymond Lu2005-08-291-3/+3
| | | | | | | | | | | | | | | | | | | | Description: Added 2 new configure options, --enable-exception and --enable-accuracy. --enable-exception lets the library check whether user's exception handling functions are present during compiler data conversions and use them if they are. When it's disabled, this step is skipped to improve conversion speed. This step isn't implemented yet for soft conversions because there would be little gain in speed. --enable-accuracy guarantees data accuracy during data conversions. It means the library will choose compiler conversions only if the accurate data is secured. Otherwise, the library will go for the library's own conversions. If this option is disabled, the library uses compiler conversions in favor of their speed as long as they work even if data can be incorrect. Platforms tested: h5committest and fuss. Some systems may fail after this checkin.
* [svn-r10064] Purpose:James Laird2005-02-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | Bug fix Description: This checkin addresses two bugs. Firstly, I used the wrong semantics when detecting if $MAKE is defined to the empty string or undefined. Secondly, pmake on IRIX does not work well with automake's dependency tracking if the build is not an in-place build. Solution: Fixed semantics in configure.in. Disabled automatic dependency tracking automatically on IRIX. This is not the optimal fix, but it should work fine as long as no one is doing HDF5 development on IRIX, and it is much easier than trying to detect the exact situations in which dependency tracking fails (or than trying to fix dependency tracking!). Platforms tested: heping, modi4 (pmake and gmake)
* [svn-r9783] Purpose: Bug fixRaymond Lu2005-01-081-1/+2
| | | | | | | | | | Description: For HP-UX 11.00, the compiler generates 'floating exception' when converting 'long double' to most of integer types. Solution: Define a macro for all other systems except HP-UX 11.00. Hard set this macro to 'no' in config/hpux11.00 to skip this test for HP-UX 11.00. Platforms tested: modi4, kelgia, fuss
* [svn-r9755] Purpose: New featureRaymond Lu2005-01-061-0/+19
| | | | | | | | | | | | | Description: Start to support software conversion between long double and all integers. Solution: No major changes to the algorithm. Changes to configure is to exclude SGI for long double to integers test because there're too many problems in their compiler. Platforms tested: h5committest, modi4, fuss, Teragrid, arabica Misc. update: RELEASE.txt
* [svn-r7269] Purpose:Bill Wendling2003-07-281-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | Update Description: Revamped the configuration system. The configurations for the Fortran and C++ libraries are no longer separate from the "main" configuration system. This involved removing the "configure*" and "aclocal.m4" files from the fortran/ and c++/ subdirectories. Also merging settings in the config/ subdirectories into the main config/ subdirectory. Fortran header files had to be modified a little for Linux. It was checking if it was a Linux machine by some #defines, however with the -std=c99 switch, these defines weren't there. I added a check for some other ones which should be there whether the -std=c99 switch is used or not. Platforms tested: Verbena (Fortran & C++) Sol (Fortran & C++) Copper (Fortran & C++) Modi4 (Parallel, Fortran, & C++) Misc. update:
* [svn-r1645] conclude.in:Albert Cheng1999-09-221-1/+1
| | | | | | | | | | | | | | | | | | | Problems: libtool generated compiler linking commands with dependency_libs appended to any dynamic library used but only "-lz -lmfhdf ..." were appended but "-L...", if used, are not appended. So, the "-lz ..." information is incomplete and solaris cc does not allow even if the "-L..." information is provide in later part of the command. Solution: Included $LDFLAGS in the building of $(LIB). irix5.x: irix6.x: Added "-s" to PROD_CFLAGS so that production code are striped for smaller sizes. Platform Tested: Solaris 2.6
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-021-0/+50
---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).