summaryrefslogtreecommitdiffstats
path: root/config/linux
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r915] Changed typo `cc' to `gcc'Robb Matzke1998-11-161-2/+2
|
* [svn-r907] Changes since 19981111Robb Matzke1998-11-131-59/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
* [svn-r879] Changes since 19981105Robb Matzke1998-11-061-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
* [svn-r569] Changes since 19980731Robb Matzke1998-08-051-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release Added ./Makefile to the distribution again -- it got lost in the changes last week although it isn't all that important a file since it gets clobbered by configure anyway. ./bin/trace ./doc/html/Filters.html ./doc/html/H5.format.html ./doc/html/H5.user.html ./src/H5.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ocomp.c ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c ./src/H5Zprivate.h ./src/H5Zpublic.h ./src/hdf5.h ./test/dsets.c ./tools/h5ls.c Added the data filter pipeline, a generalization of the compression stuff which allows things like checksums, encryption, compression, performance monitoring, etc. See ./doc/html/Filters.html for details -- it replaces the Compression.html doc. ./src/H5T.c Cleaned up debugging output. ./config/linux Added checks for egcs and pgcc and changed optimization flags for the compilers. ./src/H5G.c ./tools/h5dump.c Fixed compiler warnings in these files and others. ./configure.in ./src/H5private.h ./test/mtime.c Added a check for difftime() and defined HDdifftime() to do something else on systems that don't have difftime().
* [svn-r417] ./config/linuxRobb Matzke1998-06-101-0/+6
| | | | | | Made `--enable-parallel' the default on my system. It used to be that way before but then I accidently turned it off and forgot about it.
* [svn-r398] Changes since 19980501Robb Matzke1998-05-131-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Bprivate.h ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5Gpkg.h ./src/H5MF.c ./src/H5P.c ./src/H5Ppublic.h ./test/big.c ./html/Big.html ./html/Files.html Family members can now be any size >1kB. Got rid of some places where we were reading a property list after it was closed. ./MANIFEST ./src/Makefile.in ./src/h5repart.c A program to repartition file families. The source and/or destination may be files or file families. Examples: testhdf5 -c -o stab h5repart -m 1m tstab2.h5 x%05d.h5 h5repart -m 100k x%05d.h5 y%05d.h5 h5repart y%05d.h5 z.h5 diff tstab2.h5 z.h5 ./src/h5ls.c Added a usage message, replaced assertions with error messages. ./config/linux Made a warning message more obvious. Added better optimization flags for Pentium-Pro's.
* [svn-r356] Changes since 19980421Robb Matzke1998-04-221-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release ./src/H5.c ./src/H5private.h ./src/H5public.h ./src/H5Fpublic.h Changed the version number constants to names that begin with H5_VERS_ and added macros that check that the version numbers in the include files match the version number of the library. ./MANIFEST ./html/H5.user.html ./html/Version.html [NEW] ./html/version.obj [NEW] ./html/version.gif [NEW] Documented version numbers and the macros, constants, and functions associated with them. ./bin/versinc A perl script that increments the minor version number and sets the patch level back to zero. This is intended to be invoked from the top of the source tree by a cvs commit anywhere in the source tree. Quincey? ./src/H5O.c ./src/H5Oprivate.h Added H5O_count() to count the number of object header messages of a particular type. Quincey needs this for the attribute package. ./test/dsets.c Fixed warnings. Enabled the small strip-mine buffer test. ./config/linux Added optimizations for the Pentium-Pro for production mode.
* [svn-r337] Changes since 19980403Robb Matzke1998-04-071-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in Moved setting of compiler warning switches earlier in the file. Turned on more warning switches to gcc. ./config/linux Prints a warning if the gcc version is less than 2.8.1 since that version has problems with register allocation for `long long'. ./html/Datatypes.html Documented sharing of data types between datasets. ./src/H5G.c ./src/H5Gpublic.h Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard links. Still have soft links to do. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5D.c ./src/H5E.c ./src/H5Eprivate.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5HLprivate.h ./src/H5I.c ./src/H5Iprivate.h ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5Ssimp.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5detect.c ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tstab.c Fixed comparisons between signed and unsigned values. Fixed warnings about unused function arguments.
* [svn-r335] Changes since 19980330Robb Matzke1998-04-031-60/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
* [svn-r326] Changes since 19980318Robb Matzke1998-03-181-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/linux Turned on MPIO if the host name is `arborea' so I always compile it and realize when I break something instead of waiting for Albert or Kim to find it. ./MANIFEST ./html/H5.user.html ./html/IOPipe.html [NEW] ./html/pipe1.gif [NEW] ./html/pipe1.obj [NEW] ./html/pipe2.gif [NEW] ./html/pipe2.obj [NEW] ./html/pipe3.gif [NEW] ./html/pipe3.obj [NEW] ./html/pipe4.gif [NEW] ./html/pipe4.obj [NEW] ./html/pipe5.gif [NEW] ./html/pipe5.obj [NEW] Documented the raw data I/O pipeline.
* [svn-r322] Changes since 19980313Robb Matzke1998-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure ./test/iopipe.c Added check for system(3) ./config/freebsd2.2.1 ./config/linux Added -DH5D_DEBUG to the debug flags. ./src/H5D.c ./src/H5Dprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./html/Datasets.html Finally implemented strip mining in the I/O pipeline, placing a user-defined upper bound on the amount of temporary memory used by the pipeline. The default is 1MB type conversion and background buffers allocated/freed on demand. However, the size can be changed and/or application-allocated buffers supplied with H5Pset_buffers() called on the data transfer property list passed to H5Dread() and H5Dwrite(). Minor optimizations to H5Dread() and H5Dwrite(). More coming later... ./test/dsets.c Added calls to H5Pset_buffer() to test application-defined temporary buffers in the I/O pipeline. ./test/Makefile.in Removed `iopipe' from the list of confidence tests. Saying `make timings' in the test directory runs timing tests. I did this because (1) they don't really test anything new, and (2) they can take a long time to run.
* [svn-r301] Changes since 19980226Robb Matzke1998-02-271-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release Changed default to not tag CVS sources. ./src/H5F.c Replaced a constant switch with preprocessor directives. Removed a local variable which was set but not used. ./src/H5Fprivate.h Changed `long long' to `int64' to get rid of ansi warnings in a few places. Fixed bugs in INT64DECODE() and UINT64DECODE() for big-endian architectures. This fixes all the bugs with the Irix -64 compile. ./src/H5F.c The default address and length sizes are set according to the sizeof(size_t) now that the bugs have been fixed. ./src/H5Fpublic.h Removed a trailing comma in an enumerated type. ./src/H5Fstdio.c ./src/H5Fsec2.c Added two more calls to fseek64() and lseek64(). Removed `long long' in place of `int64' to suppress -ansi warnings. ./src/H5P.c Replaced a FAIL with H5F_LOW_ERROR. ./src/H5private.h ./configure.in Increased version number to hdf5-1.0.1a since we've already released hdf5-1.0.0a. Include <sys/types.h>. Fixed indentation. Fixed detection of off64_t for old Irix systems where it might be a struct. ./src/Makefile.in Moved a comment from the shell to the makefile since some versions of sh barf on interactive comments. ./config/linux Allow overriding of the CC variable from the command-line. It still defaults to gcc but this allows us to specify a complete path from test scripts by saying: CC=/usr/local/tools/gnu/gcc sh configure
* [svn-r290] Changes since 19980206Robb Matzke1998-02-191-11/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./src/H5Fprivate.h ./src/H5Fsec2.c We now detect and use lseek64() on systems that have it (e.g., Irix64) and are able to generate >2GB files on Irix XFS file systems (and anything else that supports large files). This change also removed some warning messages from the Irix `-64' compiler. > $ ls -l istore.h5 > -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5 ./configure.in ./src/H5Fprivate.h ./src/H5Fstdio.h We now detect and use fseek64() on systems that have it (e.g., Irix64) and are able to generate >2GB files on Irix XFS file systems (and anything else that supports large files). This change also removed some warning messages from the Iris `-64' compiler. ./src/H5E.c ./src/H5Epublic.h Added the H5E_OVERFLOW error to signal file address overflow. ./src/H5Fpublic.h ./examples/h5_chunk_read.c ./examples/h5_compound.c ./examples/h5_extend_write.c ./examples/h5_group.c ./examples/h5_read.c ./examples/h5_write.c ./html/Datasets.html ./html/Files.html ./html/H5.api.html ./html/H5.intro.html ./html/H5.sample_code.html ./html/ph5example.c ./html/review1.html ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/tfile.c ./test/th5p.c ./test/theap.c ./test/tohdr.c ./test/tstab.c ./testpar/phdf5.c Renamed file access constants to follow the naming scheme. Also changed the base names a little to be more accurate as to what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE will temporarily work. H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen() H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate() H5ACC_WRITE --> H5F_ACC_RDWR H5ACC_OVERWRITE --> H5F_ACC_TRUNC Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE macros in H5Fpublic.h should be an enum typedef and have names more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also change the access_mode argument of H5Cset_mpio(). H5Fcreate() and H5Fopen() are more strict now about which flags are acceptable for the operation. ./src/H5Fprivate.h ./src/H5F.c ./src/H5C.c Changed the file access template to make it more general. A union contains a struct for each type of low-level driver and the default template is initialized at run-time. ./src/H5Fpublic.h ./src/H5F.c Added H5Fget_access_template() and cleaned up H5Fget_create_template(). ./src/H5C.c The H5Cset_mpi() no longer trashes the file access template when an error is detected. We check for errors and *then* update the file access template. Added H5C_close() so Albert and Kim have a place to release the MPI communicator and info from the file access property list. Kim or Albert: I notice in H5Cset_mpi() you copy the MPI communicator. Do you need to do something similar in H5C_copy()? ./src/H5F.c Added more error checking for the file creation and access property lists because it used to be possible to make the library dump core by swapping the creation and access property list ID numbers of H5Fcreate(). ./test/istore.c ./test/tfile.c ./test/th5p.c ./test/theap.c ./test/tohdr.c ./test/tstab.c ./testpar/testphdf5.c One must pass H5C_DEFAULT as the file creation or access property list in order to get the default property list. It is no longer possible to pass zero or any other arbitrary bad object ID. ./src/H5Fcore.c ./src/H5Ffamly.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5MF.c The file access property list is passed to all H5F_low_...() functions and to the drivers. ./src/H5Fcore.c The block size can be set at run time on a per-file basis instead of at compile time across all files. The "5000 items in a group test" now takes 1.6 seconds. ./src/H5private.h Removed inclusion of mpi.h and mpio.h since they're included from H5public.h. ./src/H5Cpublic.h ./src/H5C.c Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(), H5Cset_split(), and H5Cset_family() in addition to the H5Cset_mpio() that Kim and Albert already wrote. We still need the H5Cget_driver() and an H5Cget...() counterpart for each of those functions. The split and family drivers still need a little work but I'm checking this in anyway.
* [svn-r213] Changes since 19980130Robb Matzke1998-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added H5Fmpio.c. One way to check that you've properly included new files is to run `./bin/release none', then unpack the resulting tar file somewhere and try to compile it. The tar file will be ./releases/hdf-5.0.0a.tar. ./config/freebsd2.2.1 ./config/linux Added `-ansi' ./acconfig.h Added definitions for PHDF5 and HAVE_PARALLEL. ./configure.in Added minimal support for parallel build. Kim and Albert will have to flesh this out or I can do it if they're more specific about what they need. ./config/commence.in Added default value for $(RUNTEST) ./config/conclude.in `make test' uses value of $(RUNTEST) to run test cases. ./src/Makefile.in Added PARALLEL_SRC for conditional compilation of H5Fmpio.c ./src/H5D.c ./src/H5Dpublic.h Added H5Dget_type() for Elena NOTE: These changes require that configure be rerun. If you're using GNU make it will happen automatically, otherwise do it by hand.
* [svn-r197] Changes since 19980129Robb Matzke1998-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/freebds2.2.1 ./config/irix64 ./config/linux Added -DH5T_DEBUG to the debugging flags. Also changed `true' to `:' for the Irix64 ranlib program. This turns on printing of data type conversion statistics when the program exits. ./html/Datatypes.html Fixed documentation for data conversion functions and updated examples. ./src/H5D.c The I/O pipeline updates data type conversion statistics. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tpublic.h Cleaned up data type conversion registration interface.
* [svn-r171] Changes since 19980126Robb Matzke1998-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added new files. ./config/linux Added `-pipe' to the default GCC flags since this is supposed to result in better performance on a multi-processor machine. ./html/Datasets.html ./html/dataset_p1.gif [NEW] ./html/dataset_p1.obj [NEW] Updated to match source. The things which aren't part of the Feb-1 prototype are marked in bold. Added an example for partial I/O. ./html/Groups.html [NEW] ./html/group_p1.gif [NEW] ./html/group_p1.obj [NEW] ./html/group_p2.gif [NEW] ./html/group_p2.obj [NEW] ./html/group_p3.gif [NEW] ./html/group_p3.obj [NEW] New documentation for groups. ./html/H5.sample_code.html Updated two examples to match code.
* [svn-r151] Changes since 19980105Robb Matzke1998-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/freebsd2.2.1 ./config/linux Added -UH5O_DEBUG to the debug flags. Turn this on to get lots of lines on stderr to show what objects are opened and closed. ./src/H5C.o ./src/H5Cpublic.h ./test/dsets.c ./test/tfile.c Split H5Cget_prop() and H5Cset_prop() into functions for each property. ./src/H5D.c ./src/H5Dpublic.h ./src/H5Gstab.c ./src/H5O.c ./src/H5Ocont.c ./src/H5Ocstore.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oistore.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Ostab.c ./src/H5P.c ./src/istore.c ./test/tohdr.c Object header functions now understand constant vs. non-constant messages. ./src/H5F.c ./src/H5Fprivate.h The file OID can be closed before other OID's. ./src/H5Flow.c H5F_addr_defined() is a macro in this file. ./src/H5G.c ./src/H5Gpublic.h ./test/tstab.c A current working group cannot be deleted. ./src/H5Gent.c ./src/H5Gpkg.h Removed unused functionality. ./src/H5public.h Includes <sys/types.h> for size_t.
* [svn-r136] ./MANIFESTRobb Matzke1997-11-141-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./src/Makefile.in Added H5Ffamily.c and H5Fsplit.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Added `const' to sublass arguments. ./src/H5F.c ./src/H5Flow.c ./src/H5Fsec2.c Make sure file buffers get flushed during a call to H5Fflush(). Check for overflow in address encoding and decoding. ./src/H5Ffam.c ./src/H5Fprivate.c ./test/istore.c Implementation of file families so 32-bit machines can access 64-bit files. ./src/H5Oprivate.h Removed H5O_NO_ADDR constant. ./config/freebsd2.2.1 ./config/linux Added -DH5G_DEBUG and -DH5F_DEBUG to the list of debugging flags. ./html/H5.format.html Changed some <offset>-sized things to <length>-sized things. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5C.c ./src/H5D.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gshad.c ./src/H5Gstab.c ./src/H5H.c ./src/H5Hprivate.h ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocont.c ./src/H5Oistore.c ./src/H5Oprivate.h ./src/H5Ostab.c ./src/H5Ostdst.c ./src/H5pivate.h ./src/debug.c ./test/istore.c ./test/theap.c ./test/tohdr.c ./test/tstab.c Lots of changes caused by generalizing addresses. The haddr_t is now a struct, so you can no longer perform arithmetic on it. But since it's small, simple, and often used, storage is allocated like with an integer. But we always pass them around by reference. That is, when using an address in another struct, allocate space: struct my_struct { char *name; haddr_t address; } x; But when passing it to a function, pass by reference: H5F_addr_print (stderr, &(x.address)); Addresses should be initialized with H5F_addr_undef (&(x.address)); Functions for operating on addresses are in H5Flow.c and begin with H5F_addr_... Functions never return haddr_t or haddr_t*; they always pass them through arguments instead. A function that returns an address through an argument does so with its last argument and it is marked with `/*out*/'. Calls to such functions also mark output-only arguments with `/*out*/' ./src/H5Fsplit.c (new) A two-member family where all meta data goes in the first member and all raw data goes in the second member. ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5Gnode.c ./src/H5H.c ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c Differentiate between meta data storage and raw data storage. Provide a mechanism so that the file driver can extend the file to allocate more memory. ./src/H5E.c ./src/H5Epublic.c Added the error H5E_TRUNCATED to be reported when the file is shorter than the length recorded in the boot block. ./src/H5F.c Added H5F_locate_signature() so we only do it in one place now. ./INSTALL ./INSTALL_MAINT Just a couple clarifications. ./html/ExternalFiles.html ./html/storage.html Documents how external files work. ./test/hyperslab.c ./test/istore.c Fixed printf's on 64-bit machines. ./test/istore.c Added ifdef's to test the split file driver.
* [svn-r135] ./config/linuxRobb Matzke1997-11-071-10/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./config/freebsd2.2.1 Rewritten to be more flexible. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5F.c ./src/H5H.c ./src/H5Gpkg.h ./src/H5Gshad.c ./src/H5O.c ./test/istore.c ./test/tstab.c Accumulates cache statistics and displays the results on stderr when the file is closed if it was opened with H5F_ACC_DEBUG passed into H5F_open() ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c Added more debugging which is turned on if H5B_DEBUG is defined on the compile command (see config/linux). Fixed a couple of bugs with left insertions which are used by the indexed storage stuff. ./src/H5Flow.c Fixed a memory leak. ./src/H5Fprivate.h Fixed warnings about shifting more than size of object. ./src/H5Fstdio.c Fixed seek optimizations back to the way Quincey originally had them. ./src/H5V.c Removed unused variables.
* [svn-r134] Changes since 19971023Robb Matzke1997-10-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/conclude.in Test work when `.' isn't in $PATH. ./src/H5F.c ./src/H5Fcore.c NEW ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/Makefile.in ./MANIFEST Added the in-core temporary file driver as an exercise to clean up some of the H5F package. It speeds up `testhdf5 -o stab' by 25 percent! If you want to try it you'll need to recompile everything with `-DH5F_LOW_DFLT=H5F_LOW_CORE'. Don't expect testhdf5 to ever work since creating a file, closing it, and then opening it for read-only will fail.
* [svn-r133] ./MANIFESTRobb Matzke1997-10-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./src/Makefile.in Added new files. ./html/H5.apiv2.html Added documentation for group stuff. ./src/H5private.h ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Flow.c NEW ./src/H5Fprivate.h ./src/H5Fsec2.c NEW ./src/H5Fstdio.c NEW Low-level file driver is selected at runtime. ./src/H5Fprivate.h Got rid of `shift >= sizeof operand' warnings on big endian machines. ./src/H5Fistore.c ./test/istore.c Still working on indexed storage... ./src/H5H.c ./src/H5Hprivate.h Removed alignment constraints.
* [svn-r129] Changes since 19970916Robb Matzke1997-10-201-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
* [svn-r72] *** empty log message ***Robb Matzke1997-09-101-3/+1
|
* [svn-r34] ./config/commence.in NEWRobb Matzke1997-08-151-0/+8
./config/conclude.in NEW Templates for the beginning and end of each Makefile. ./config/depend.in NEW Template for the part of the Makefile that generates source dependencies. ./config/freebsd2.2.1 NEW ./config/linux NEW Personal preference files. These are not part of a distribution but are for fine tuning configure for particular systems and are used by the HDF5 maintainers.
generated by cgit v0.12 at 2024-11-06 18:03:56 (GMT)