summaryrefslogtreecommitdiffstats
path: root/config
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r2418] Added the variable, PUB_PROGS, which holds the public programsAlbert Cheng2000-06-272-4/+5
| | | | that are to be installed.
* [svn-r2391] Adding the HPUX 11.00 file which is a copy of the HPUX 10.20 ↵Bill Wendling2000-06-191-0/+36
| | | | config file.
* [svn-r2271] Document the changes I made of renaming Makefile target asAlbert Cheng2000-05-191-0/+5
| | | | reconfigure.
* [svn-r1999] Correctly detect gcc 2.95.x and Pentium Pro|Pentium II|etc. ↵Quincey Koziol2000-03-041-12/+48
| | | | processors.
* [svn-r1979] Purpose:Albert Cheng2000-02-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | Feature "improvement". Problem: The Makefile target triggers gmake to redo the whole auto-configure process if it sees any autoconfigure related files changed. It causes couple problems. One is that when multiple machines using --srcdir are running make, they may detect the changes and launch the autoconf at the same time. These end up as multiple hosts updating the same srcdir area together--bad things can happen. Another one is that when one modifies some Makefile.in, then try "make distclean" before launching the configure process. Instead of cleaning things, it started a configure, recreate all Makefiles and other files, then finally come around to do the distclean--who knows what it cleans by now since the Makefile is changed too. Last problem was that this auto-process will launch even for command "gmake -n ...". Solution: Renamed Makefile target to reconfigure so that the auto-checking is still available but must be launched explicitedly. If one wishes to have the auto-checking as default, one may do alias gmake "\gmake -i reconfigure; gmake \!* ".
* [svn-r1975] Purpose:Albert Cheng2000-02-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration improvement Problem: Arabica has a zlib library that is a dynamic lib in /usr/ncsa/lib. Binary generated would fail to run with a missig libz.so complain if /usr/ncsa/lib is not in $LD_LIBRARY_PATH. This exposed the problem that if the binary is linked with -L$mylibpath -lxyz where libxyz is a dynamic type, the binary can't run if $mylibpath is not in $LD_LIBRARY_PATH (or equivalent) or as part of the system default library paths (e.g., /usr/lib, /usr/local/lib). This problem also caused failures during configure (when trying to see what format to print long long) and during H5detect. The base cause is because libtool does not "transfer" the knowledge of -L$mylibpath to the wrapper file its mode=link generates. Solution: bin/ltmain.sh: Changed it so that it transfers the libpaths from -Llibpaths to the wrapper generated. I used the already defined variable finalize_shlibpath. Not sure it is correct to use it this way. Need to check on this. configure.in: Put in a patch to transfer information from LDFLAGS to LD_LIBRARY_PATH right before the AC_TRY_RUN. The above fix for ltmain.sh does not work here because libtool is generated later than this point. There should be a cleaner way to do this. Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. commence.in: Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. Makefile.in: Another patch of LDFLAGS to LD_LIBRARY_PATH because I could not make it to generate H5detect in the wrapper form of libtool. Need to make it to use the libtool correctly. Later. Platform tested: arabica (solaris 2.7) baldric (solaris 2.6)
* [svn-r1954] This file handles configuration of Cygwin on PCsRaymond Lu2000-02-091-0/+20
|
* [svn-r1951] Tweaks to detect the shared libraries on NCSA's systems, so that ↵Quincey Koziol2000-01-301-2/+3
| | | | | | Albert's automated tests will work correctly on arabica.
* [svn-r1949] Problem:Albert Cheng2000-01-265-11/+11
| | | | | | | | | | | | The Dependencies files were generated in $srcdir even when --srcdir is used. It caused conflicts if multiple hosts are doing make sharing the same $srcdir. It also violated the rule that --srcdir would not modify the content of $srcdir which could be on a read-only media like a CD-ROM. Solution: Dependencies files are generated in the "current" directory. Platform tested: dangermouse (linux), modi4 (IRIX64).
* [svn-r1846] ** config/depend1Robb Matzke1999-11-231-2/+2
| | | | | A minor tweak to the way GNU systems generate file dependencies for the Makefiles.
* [svn-r1834] Blocked remark # 3201 (parameter unused) since the SGI compiler ↵Quincey Koziol1999-11-171-9/+10
| | | | | | doesn't recognize our "UNUSED" macro and whines a lot about the unused parameters.
* [svn-r1814] * 1999-11-03Robb Matzke1999-11-031-10/+16
| | | | | | | | | | | ** config/depend1.in We don't regenerate the Dependencies files if we're compiling in the source tree because `gcc -MM' doesn't output enough information to make the result usable when compiling outside the source tree. ** src/H5config.h.in Regenerated to include HAVE_LIBMPI and HAVE_LIBMPIO because of recent changes to configure.in
* [svn-r1806] * 1999-11-02Robb Matzke1999-11-021-0/+3
| | | | | | | | | | | | | ** bin/rpmsync ** config/depend1.in Tweaks for versions of `make' that can't search directories. ** examples/Dependencies ** src/Dependencies ** test/Dependencies ** testpar/Dependencies ** tools/Dependencies Regenerated all these with more complete path names.
* [svn-r1802] Changes since 19991019Robb Matzke1999-11-018-21/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
* [svn-r1764] Added the install-doc and uninstall-doc targets.Albert Cheng1999-10-152-0/+34
|
* [svn-r1763] Shared mode works fine now with IRIX64. Removed the special ↵Albert Cheng1999-10-151-3/+0
| | | | disable-shared.
* [svn-r1753] Changes since 19991007Robb Matzke1999-10-151-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./src/H5config.h.in [REGENERATED] The /usr/ncsa/{include,lib} directories are only added if they actually exist. This fixes a warning on some systems. Checks for the <pdb.h> header file and also for either the PDB or Silo library, and if found prepares to compile the pdb2hdf program. ./config/distdep Relative path names for include files are changed to base names since the makefile contains the logic for searching and since it's likely that building the .distdep files happed from a location other than where they would be used in the file system. ./config/conclude.in Fixed shell errors when `for' loops iterate over nothing for the `uninstall' target. ./src/H5D.c ./src/H5Oefl.c File names for the external files are added to the heap when the dataset is created instead of when the object header is written. This fixes a rare infinite recursion bug. ./src/H5FD.c ./src/H5FDpublic.h Optimization to the free list causes H5FD_alloc() usage to go from >10 seconds to <0.4 second for one example (converting a 30MB equation of state file from PDB to HDF5 format). The optimization is to simply keep track of the largest item in the free list and not search the free list when the largest item is not big enough to satisfy the request. ./src/H5FDcore.c ./src/H5FDcore.h ./test/h5test.c If the `backing_store' property is true then a flush causes the entire contents of memory to be written to the specified file. This is in preparation for the ASCI/red optimizations and is currently tested by the pdb2hdf `--cached' switch. ./src/H5Odtypes.c Wrapped three long lines. ./tools/Makefile.in ./tools/pdb2hdf.c [NEW] A PDB-to-HDF5 translator. It only translates meta data -- the resulting HDF5 points into the PDB file for the raw data.
* [svn-r1688] Added missing vector Cray (x90 series) configuration file.Quincey Koziol1999-09-291-0/+138
|
* [svn-r1672] bin/ltconfig:Albert Cheng1999-09-281-4/+8
| | | | | | | | | | | | | ltconfig used just an empty source file to test the share lib compiler options. SUNSpro CC returns succeed though it issues a warning too. ltconfig did not like the warning. Changed it to test with a file containing a simple dummy program. Platform tested: solaris 2.6 and 2.7 config/solaris2.x: Changed default compiler to "cc" now that Sunpro CC can produce static and shared codes correctly. Also added -s to PROD_CFLAGS to produce leaner binary files.
* [svn-r1645] conclude.in:Albert Cheng1999-09-223-3/+3
| | | | | | | | | | | | | | | | | | | Problems: libtool generated compiler linking commands with dependency_libs appended to any dynamic library used but only "-lz -lmfhdf ..." were appended but "-L...", if used, are not appended. So, the "-lz ..." information is incomplete and solaris cc does not allow even if the "-L..." information is provide in later part of the command. Solution: Included $LDFLAGS in the building of $(LIB). irix5.x: irix6.x: Added "-s" to PROD_CFLAGS so that production code are striped for smaller sizes. Platform Tested: Solaris 2.6
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-1010-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1547] Changes since 19990723Robb Matzke1999-07-271-0/+21
| | | | | | | | | | | | | ---------------------- NOTE: These bug fixes but have been applied only to the 1.3 branch per Albert's request. ./config/gnu-flags [1.3] Added support for gcc-2.95 by adding full optimization and debugging flags and applied a patch from Marcus Daniels. ./src/Makefile.in [1.3] Removes the `libhdf5.settings' file for `make clean'.
* [svn-r1543] Added -h scalar0 to production CC flags to produce correct code.Quincey Koziol1999-07-231-1/+1
|
* [svn-r1515] Changes since 19990715Robb Matzke1999-07-193-110/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
* [svn-r1475] ./config/gnu-flags [1.2, 1.3]Robb Matzke1999-07-131-18/+30
| | | | A warning is printed for all versions of EGCS before 2.91.67.
* [svn-r1458] Changed the disable-shared to be default only if not set.Albert Cheng1999-07-101-3/+26
| | | | | Added cached sizes for the leastN_t and fastN_t types which are not defined as system types for TFLOP.
* [svn-r1448] Added two IBM specific configuration files which are provided byAlbert Cheng1999-07-082-0/+85
| | | | Richard Hedges of LLNL.
* [svn-r1372] Set enable-shared to no by default for TFLOPS and IRIX64 systems.Albert Cheng1999-06-232-0/+5
| | | | | Shared lib and libtool are not working for them yet. Users can still force enable-shared on by "configure -enable-shared ..."
* [svn-r1315] Changes since 19990607Robb Matzke1999-06-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] ./src/libhdf5.settings.in [NEW] ./config/conclude.in ./INSTALL ./MANIFEST A file called `libhdf5.settings' is installed along with the libraries and it contains a list of various things that might be of interest to someone using the library (such as what compiler/options were used and what other libraries might need to be linked to satisfy external references). We can add more things as it becomes necessary. Here's a sample... SUMMARY OF THE HDF5 CONFIGURATION ================================= HDF5 Version: hdf5-1.1.106 Configured on: Tue Jun 8 11:38:52 EDT 1999 Configured by: matzke@llnl.gov at Spizella Software Configure mode: development Host system: i686-pc-linux-gnulibc1 Byte sex: little-endian Libraries: static, shared Parallel support: mpicc Installation point: /usr/local Compiler: mpicc (egcs-2.91.66) Compiler switches: -Wall -g Extra libraries: -lmfhdf -ldf -lz -ljpeg -lm Archiver: ar Ranlib: ranlib Debugged Packages: d,e,f,g,hg,i,mm,o,p,s,v,z API Tracing: yes File addresses: large
* [svn-r1294] Removed the pre-defined macro DOS386. It was used to identifyAlbert Cheng1999-06-031-1/+0
| | | | | being in the TFLOPS machine but it is not recognized by the system. TFLOPS uses __PUMAGON__ to identify itself.
* [svn-r1289] Removed RUNTEST before the /bin/sh because all the systems that isAlbert Cheng1999-05-281-1/+2
| | | | | | | | | | known so far do not need a "launching command" to run shell script. (If a future system needs it, maybe we should use a new VARIABLE called RUNSHELL, default to /bin/sh, to do the launching.) Then inside the test shell script, it needs to know how to launch serial or parallel executions. So, pass the RUNSERIAL and RUNPARALLEL variables to the /bin/sh command.
* [svn-r1240] Changes since 19990427Robb Matzke1999-04-303-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5ls.c Added a `--address' (`-a') switch which causes h5ls to display file addresses for raw data. For contiguous datasets it's just a nice simple number, but for chunked datasets it's a list of logical dataset coordinates, file addresses, filter masks, and storage sizes. Changed `--dump' switch to `--data'. ./src/H5D.c ./src/H5F.c ./src/H5Fprivate.h Enhanced the indexed-storage B-tree iterator so it can dump raw data addresses (and other info) to the standard error stream. Added H5Ddebug() so h5ls has a way to dump addresses for datasets. I'm not sure what else this API function should do, so I think we should discuss it before we document it. So far, h5ls is the only thing that uses it, and we can easily change that. ./src/H5Tconv.c ./test/dtypes.c Finally had a chance to verify Paul's H5T_conv_s_s (general string to string conversions) bug fixes and incorporate them into H5T_conv_f_f (general floating-point to floating-point conversions) and H5T_conv_i_i (general integer to integer conversons). Thanks Paul. ./src/H5D.c ./src/H5S.c ./src/H5Sprivate.h Added performance timers around data space read and write callbacks. They were already there for the gather/scatter callbacks. The timings for read/write callbacks are displayed along with gather/scatter when data space debugging is turned on. ./bin/iostats Updated to print totals. Added a `--fast' option that doesn't do any output except the totals and is much faster. ./bin/trace Changed __unused__ to UNUSED to match source code. ./config/gnu-flags Updated error message for pgcc. I've sent bug reports to the pgcc people but the new version still has the same bug. ./configure.in ./config/conclude.in ./config/depend.in Fixed dependencies for non-GNU makes when run in a directory other than the hdf5 source tree. Updated GNU `make dep' rules to copy the distributed dependencies for non-GNU makes into the source tree when run in some other directory.
* [svn-r1224] Changes since 19990426Robb Matzke1999-04-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5tools.c ./tools/h5tools.h Finally fixed a long-standing bug that caused core dumps if a compound datum rendered to more than some number of characters (we kept bumping up the limit at the risk of violating stack size limits on some machines). The fix works only on systems that have the vsnprintf() function (otherwise a 4kB limit is imposed, which if violated probably dumps core). If vsnprintf() is present then the library dynamically allocates space for the output string. Also made it possible to control how compound data is rendered across multiple lines of output by allowing the caller to specify where optional line-breaks get inserted. The output functions split up the value at one or more optional line-breaks to prevent it from wrapping around the screen. If a datum doesn't fit on the current line but would fit on the next line then it is printed on the next line regardless of whether optional line-breaks would have prevent wrapping around the screen. This makes it easier to find the beginnings of compound data values. This feature is disabled by default but can be enabled by the application. If a datum doesn't fit on the current line and the previous datum also occupied more than one line then we move to the next line before printing. This makes it easier to find the beginnings of compound data values but prevents the output from looking fragmented if there are only a few long values among mostly short values. This feature is disabled by default but can be enabled by the application. The application can control the printf() formats used for all the native data types. The defaults are what the library used to use: %g, %ld, %lu, %d, and %u ./tools/h5ls.c Compound datatype values can now be split across multiple lines of output instead of just wrapping. Also, when lots of compound values are too long they all start at the beginning of a line. This only required about 10 lines of changes in the setup for tools library calls (I didn't modify the h5dump program because it uses its own version of the tools library that forked off long ago). Added code for Win32 which is unable to cast `unsigned long long' to `double'. If the dataset size exceeds (2^63)-1 then the percent utilization is not displayed (this is easily possible with chunked datasets). This is untested yet. ./configure.in ./src/H5config.h.in ./src/H5.c ./src/H5private.h Check for vsnprintf() and provide a simple, stupid definition if it isn't available. The stupid definition just calls vsprintf() and ignores the second argument. This can result in buffer overflows in h5ls and h5dump since vsprintf() is an unsafe function (and anyone can create an hdf5 file that runs an arbitrary command from h5ls and h5dump in that case)! ./config/conclude.in Remove more *.o files for `make clean' ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c Cleaned up a memory leak during H5_term_library() by allowing H5I_clear_group() to skip items that couldn't be freed. This allows the item to remain in the group until we can free it later. ./src/H5F.c The H5F_close_all() function fails if a file cannot be closed.
* [svn-r1217] Changes since 19990426Robb Matzke1999-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./examples/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Fixed some dependency problems in Makefiles. If the library version is updated then everything gets recompiled. ./src/H5G.c ./src/H5R.c Failure return value for object type functions is now H5G_UNKNOWN as documented. ./src/H5Shyper.c ./src/H5Spoint.c Fixed an unused argument warning. ./tools/h5debug.c Fixed a call to H5F_block_read() since the 4th argument is different now. ./tools/h5ls.c Added a space between the object name and class to make the output readable when the object name is longer than 24 characters. C
* [svn-r1207] Updated compile options for the Cray T3EQuincey Koziol1999-04-231-2/+2
|
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-233-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1184] Changes since 19990402Robb Matzke1999-04-152-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in Fixed so private libraries are not installed publicly. The installation directories `bin', `include', and `lib' are created mode 755. ./src/H5.c ./src/H5A.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Vprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h ./test/chunk.c ./test/dsets.c ./test/dtypes.c ./test/h5test.c ./test/overhead.c ./test/ragged.c ./test/tattr.c ./tools/h5dump.c ./tools/h5findshd.c ./tools/h5ls.c Changed `__unused__' to `UNUSED' to fix a conflict with GNU header files. ./src/H5Tpkg.h ./test/h5test.h Removed __unused__ from forward function declarations. ./src/H5P.c Removed a comment about restrictions for the type conversion temporary buffers. Thanks to Quincey, the comment no longer applied. ./src/H5T.c Relaxed the H5Tpack() a little so it would pack compound data structures that had non-transient atomic members. ./tools/h5ls.c Added a `-g' (or `--group') flag that causes information to be printed about the specified group instead of the group's contents. (sort of like Unix's `ls -d'). The `-g' can be used in combination with `-r' to print information about the group and its contents.
* [svn-r1176] Removed the -L./ and -L../ which are meaningless.Albert Cheng1999-04-081-1/+1
|
* [svn-r1169] ./configure.inRobb Matzke1999-03-301-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./configure [REGENERATED] ./src/H5D.c ./src/H5O.c Removed H5AC, H5B, and H5T from the default list of packages to debug (because they're pretty expensive debugging), and added H5O. Also fixed a bug for undefined variable in H5D when H5S debugging is turned on but H5T debugging is turned off. ./config/conclude.in Fixed installation of header files for building in a directory other than the source directory. This fixes a bug where H5config.h wasn't being installed. ./src/H5.c ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Tprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Changed the way the library shuts down again. Now it handles cycles between packages and isn't so sensitive to dependencies between packages. A package might shut down only to be restarted to process a request from some other package being shut down. Loops are detected after 100 iteractions and the shutdown is aborted with a message on standard error. This also makes it a lot easier to debug. ./src/H5A.c Fixed H5A_write() and H5A_read() so they pass a non-null background buffer to the conversion functions. This is necessary when an attribute has a compound data type. ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsec2.c Reindented new Win32 stuff. ./src/H5Odtype.c Fixed a bug when enumeration types are used in a compound data type. The byte pointer wasn't incremented after the type information was written. ./tools/h5ls.c Compound data types display their total size because it's not always obvious from looking at the members. Scalar attributes show their space as `scalar' instead of `{}'. The index value is not printed for attributes that have only a few values. Instead the word `Data:' is printed on the first line of attribute data. Named types display their data type only if verbose output was requested.
* [svn-r1154] Changes since 19990322Robb Matzke1999-03-221-18/+21
| | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] ./config/commence.in A few tweaks to the makefile rules for rebuilding makefiles. ./src/H5detect.c Fixed a really stupid mistake: resetting the signal handler after a longjmp(). This should fix Bob's SIGBUS on Solaris.
* [svn-r1151] Changes since 19990318Robb Matzke1999-03-199-33/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
* [svn-r1149] ./configure.inRobb Matzke1999-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h Temporarily commented out the code that tries to link a simple MPI-IO application because I'm not sure how to pass $LDFLAGS and $LIBS to the compiler. Removed the `--enable-parallel=ibm' switch because the library we link with is either -lmpcc or -lmpcc_r but not both. The only way to tell is to see what compiler was specified (mpcc or mpcc_r) but if that compiler is specified then we don't need any libraries (the compiler script supplies them). That leaves just two choices: the user must use a compiler script: CC=mpcc ./configure or the user must state which library is desired: LDFLAGS='-lmpcc' ./configure --enable-parallel Checks for <setjmp.h>, longjmp(), and signal(). We don't check for setjmp() because it could be a macro (in fact, Posix requires it to be a macro) and if longjmp() is present then setjmp() is probably present too ;-) ./src/H5detect.c The alignment detection loop uses SIGBUS and setjmp/longjmp instead of fork/wait in order to get around bugs with forking in conjunction with mpich. This hasn't been tested on the SP-2 yet but it does work on the DEC Alpha. ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Changed the order that libraries are linked so -lhdf5 is always before $LDFLAGS.
* [svn-r1142] Purpose:Paul Harten1999-03-151-1/+1
| | | | | | | | | | Bug fix Solution: Fixed a small typo in config/solaris2.x. Platform tested: Solaris2.5
* [svn-r1138] Changes since 19990304Robb Matzke1999-03-126-41/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/*-aix4.* [REMOVED] ./config/*-aix4.x [NEW] ./config/solaris2.5 [REMOVED] ./config/solaris2.x [NEW] ./configure.in ./configure [REGENERATED] ./MANIFEST Changed the names of the IBM-SP2 config files by replacing the minor version numbers with an `x'. The solaris config warns about old versions of gcc. The RUNSERIAL value is set to the empty string by default. The config/* file (or user) can override it by setting it to some other value. The `--enable-parallel' with no flags turns on the HAVE_PARALLEL constant in the source code but doesn't add any MPI or MPI-IO libraries to the link line. If we are compiling for parallel then configure checks that we can actually link a very simple program. This has the benefit of detecting config errors before we waste time compiling the entire library. Configure recognizes `mpcc_r' as a parallel compiler. ./src/H5A.c ./src/H5Apublic.c Fixed some compiler warnings. Changed the return type of H5Aget_name() from hssize_t to ssize_t because the name can never be larger then memory.
* [svn-r1127] Removed -64 from default setting. Irix workstations running 32 bitAlbert Cheng1999-03-091-1/+1
| | | | | | | OS cannot handle the 64 bit instruction sets. Let the local system default takes care of preferred machine code. Tested on both IRIX and IRIX64 platforms.
* [svn-r1122] Fixed a typo. DEBUG_FLAGS should be DEBUG_CFLAGS.Albert Cheng1999-03-092-3/+3
|
* [svn-r1117] Changes since 19990303Robb Matzke1999-03-047-169/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] The path for a command is calculated explicitly the hard way because `type -path' isn't portable. ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc2 Changed the way files reference each other. ./config/gnu-flags [NEW] ./config/dec-flags [NEW] These files figure out what flags to pass to certain compilers so we can reuse code in more than one config/* file. They also have better warning messages when old compilers are used. ./config/linux-gnulibc1 ./config/dec-osf4.x These files use the new *-flags files. ./src/H5D.c ./src/H5Onull.c ./src/H5Tconv.c ./tools/h5ls.c Fixed a compiler warning. ./src/H5detect.c Added a better comment to the top of the generated file.
* [svn-r1115] Changes since 19990302Robb Matzke1999-03-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-0212-153/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
* [svn-r1110] Changes since 19990226Robb Matzke1999-03-012-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions for using other compilers on Irix platforms. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h The presence of <sys/sysinfo.h> and <sys/proc.h> is only checked on DEC/Alpha because there are too many problems including these headers on other systems. ./config/irix6.x ./config/irix64 Removed `-ansi' and added a comment. Converting an ASCII UTC date and time to a time_t value is not defined by ANSI or Posix but is available if we don't use `-ansi'. This allows the dataset modification time messages to be read properly by H5Gget_objinfo(). ./src/H5Tconv.c Fixed a compiler warning. ./test/dtypes.c ./test/hyperslab.c ./test/istore.c Fixed compiler warnings in printf() statements.
generated by cgit v0.12 at 2024-11-02 00:39:52 (GMT)