summaryrefslogtreecommitdiffstats
path: root/configure.in
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r1008] Changes since 19981217Robb Matzke1999-01-071-3/+2
| | | | | | | | | | | | | ---------------------- ./MANIFEST Removed some ddl files from tools/testfiles that are no longer part of CVS. Added new enum.c test. ./configure [REGENERATED] ./configure.in Changed printf long long format detection to favor `L' over `ll'.
* [svn-r968] Changes since 19981207Robb Matzke1998-12-141-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added tcompound2.{dmp,h5} and tdset2.{dmp,h5} used by the h5toh4 testing. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added check for <sys/timeb.h> for Win32. Determines sizeof(char) just so we have a complete list of type sizes defined as preprocessor symbols. ./src/H5detect.c ./src/H5T.c ./src/H5Tpkg.h Detects alignment constraints. In order for this to work the operating system must not correct unaligned data (for instance, on the DEC Alpha one might need to say `uac p sigbus' before running H5detect). ./src/H5private.h Includes <signal.h> because it's needed by H5detect.c to detect alignment constraints. ./src/H5Tconv.c Added extra checks to all hardware conversion functions so they align data when necessary before the conversion. This slows down the conversions somewhat but they're still much faster than the software conversions. ./test/dtypes.c By setting a constant at the top of the source you can test conversions where the data is aligned on various byte boundaries. By setting a constant at the top of the source you can simulate architectures that have alignment constraints on architectures that don't. Changed typo SIZEOF_LDOUBLE to SIZEOF_LONG_DOUBLE in a few places.
* [svn-r946] Changes since 19981121Robb Matzke1998-11-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Tconv.c With my poor eyesight I missed the definitions of SCHAR_MIN and SCHAR_MAX in <limits.h> and used CHAR_MIN and CHAR_MAX incorrectly. I changed all occurrences of the latter to the former and the new hardware integer type conversions now work on Irix. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5.c ./test/h5test.c Added a wrapper for HDsnprintf() that just calls sprintf() if snprintf() isn't available. ./MANIFEST Added Paul's new h5toh4 files.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r907] Changes since 19981111Robb Matzke1998-11-131-44/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
* [svn-r883] Modified to cause creation of pablo/MakefileDan Wells1998-11-061-1/+1
|
* [svn-r879] Changes since 19981105Robb Matzke1998-11-061-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added checks for functions, structs, constants, and header files used in h5ls.c to determine the output width with various Windows compilers and Unix variants. Added check for <sys/stat.h> and defined HAVE_SYS_STAT_H. Included <sys/stat.h> in H5private.h outside the Posix.1 #include's section. ./src/H5RA.c Less aggressive about failing -- rather returns false, which allows type detection to continue. ./src/h5ls.c Data types are displayed for datasets and named data types when `-v' or `--verbose' is specified on the command-line. The algorithm is a little different than the dumper because we're trying to be human-friendly, not necessarily machine-friendly. * Any data type which matches a native C type gets printed something like `native double'. * A floating point type that matches one of the IEEE standard types but not one of the native types gets printed like `IEEE 64-bit big-endian float'. * Other floating point values have information about sign bit location; exponent size, location, and bias; and significand size, location, and normalization. * Padding and offsets are displayed for types that have padding (precision != size), including internal padding for some floating point data types. * Non-native integer types are displayed like `32-bit little-endian unsigned integer'. * Compound data types have each member displayed including the member name, byte offset within the struct, dimensions, index permutation, and data type. * String types are displayed like `256-byte null-terminated ASCII string'. * References are displayed like `8-byte unknown reference' until the reference interface stabilizes a little. * All other types including types not yet defined will be printed like `4-byte class-9 unknown'. The dimensionality of scalar datasets is printed like `{SCALAR}' instead of just `{}'. If external raw files are used to store a dataset then the offsets, sizes, and file names of each are printed if `-v' or `--verbose' was given on the command-line. If an object is found and h5ls can't determine the object type then it still tries to print the number of hard links, the OID, and any comment that might be present if `-v' or `--verbose' was specified. If the `-d' or `--dump' switch is turned on then ragged arrays will report that the data can only be dumped by dumping the component datasets explicitly. I'm not planning to implement this since we're going to eventually change the whole way ragged arrays are stored. Compound data values do not have the component names displayed by default when `-v' or `--verbose' is turned on. Instead, the names can be displayed with `-l' or `--label'. The output width is determined by the first rule that applies: * If the `-wN', `-w N' or `--width=N' switch appeared on the command line then use N for the output width. * Query the OS for the tty width in a highly unportable way borrowed from GNU `less' depending on what functions and data structures were found during configuration (if any): _getvideoconfig(), gettextinfo(), _srcsize(), ioctl(), GetConsoleScreenBufferInfo(), struct videoconfig, struct text_info, the TIOCGWINSZ ioctl, the TIOCGETD ioctl. * If the `COLUMNS' environment variable is set then use its value. * Use the value 80. Just for kicks, run Mark and Jim's test_vbt and then say `h5ls -dlsv test.vbt'. You can also try it on the various *.h5 files in the test/example directories. ./config/linux Removed turning on parallel by default on Robb's macine.
* [svn-r876] Changes since 19981102Robb Matzke1998-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/snapshot Made same fix as for the release script yesterday. ./src/H5D.c ./src/H5Dprivate.h ./src/H5G.c ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5O.c ./src/H5Oprivate.h ./src/H5RA.c ./src/H5RAprivate.h ./src/H5T.c ./src/H5Tprivate.h Improved object type checking. Instead of determining the object type by trying to open each of the possible types, we keep a table of associations between object type number (like H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa' function that returns true if the object header has the right messages to make the object a particular type. This mechanism also allows specialization of object types by permitting an object to satisfy more than one `isa' function. Added `isa' functions for groups, datasets, ragged arrays, and committed data types. ./src/H5config.h.in Added HAVE_STAT_ST_BLOCKS. I thought this had already been added, but apparently not. ./tools/h5ls.c Removed system include files since they're already included by H5private.h and since I wasn't including them portably anyway. By default, 1-byte integer types are printed as integer values instead of ASCII characters. However, the `-s' or `--string' command-line switch causes the data to be interpretted as ASCII. String data types are always printed as character data. Ragged arrays are now identified as ragged arrays and h5ls doesn't descend into the group automatically. This uses the new object type specialization stuff. ./tools/h5tools.c ./tools/h5tools.h Added the ability to print 1-byte integer types as either ASCII or numeric data instead of always ASCII. The default is to print as numeric data.
* [svn-r859] Changes since 19981030Robb Matzke1998-11-021-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added new Pablo files HDF5record_RT.h and ProcIDs.h ./acconfig.h ./configure [REGENERATED] ./configure.in ./src/H5.c ./src/H5Vprivate.h ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5public.h ./test/big.c Added more configuration stuff for the Win32 environment. Removed all the #ifdef WIN32 from the source and replaced them with OS-independent stuff. Specifics follow: Check for non-Posix.1 `st_blocks' field in `struct stat' which is used by the big file test to decide if the file system supports holes. If the st_blocks field isn't present then we just skip the test. Configure checks for <io.h> <sys/resource.h> <sys/time.h> and <winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H, HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found. Configure checks whether both <sys/time.h> and <time.h> can be included and defines SYS_TIME_WITH_TIME if so. Otherwise include only <sys/time.h> or <time.h> even if both exist. Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the result or to zero if __int64 isn't defined. The source uses `long long' in preference to `__int64'. Removed null WIN32 definition for `inline' since such a definition already exists in H5config.h Protected gettimeofday() calls in debugging code with HAVE_GETTIMEOFDAY instead of WIN32. ./src/H5F.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.h ./src/H5P.c ./src/H5Tconv.c ./src/H5private.h Removed #include of system files from library source files and consolodated them into H5private.h where they're protected by various configuration macros (most of them were duplicated there already anyway). ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/overhead.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Protected system #include's with #ifdef's from H5config.h. Undefined NDEBUG since some of the tests rely on assert() to check return values. Removed WIN32 definitions for __unused__ since this can be controlled by the definition of HAVE_ATTRIBUTE in H5config.h ./test/testhdf5.h Removed the CLEAN_CMD definition because we no longer use it. Albert's cleanup() functions replaced it. ./test/fillval.c Initialized auto hid_t variables to fix warnings in error recovery code when data flow analysis is turned on in compilers. ./test/h5tools.c Initialized an auto variable to fix a compiler warning. ./test/chunk.c ./test/ragged.c The WIN32 had some unsigned variables changed to signed because the compiler generates warnings when coercing unsigned to double(?). I changed them back to unsigned because they really are unsigned quantities. If this the change was just to shut up extraneous warnings then perhaps a compiler flag can do the same; otherwise if the compiler generates bad code then we should supply a patch file instead messing up source code with bug work-arounds. ./src/H5detect.c Protected system #include's with #ifdef's from H5config.h thereby removing a WIN32. If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that `struct passwd' doesn't exist either (we don't really need it in that case). The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of `long long' or else `__int64' or else `long' depending on what's available. ./src/H5Flow.c ./src/H5Ofill.c Added __unused__ to some function arguments that aren't used when assertions are turned off. ./src/H5V.c Changed an auto variable name in some hand-inlined code to get rid of a warning about the variable shadowing a previous auto.
* [svn-r671] Changes since 19980904Robb Matzke1998-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./bin/release ./bin/snapshot The format of the MANIFEST file has been relaxed -- comments and blank lines should no longer confuse the tools that use it. As before, this file should contain a list of *all* files that are part of HDF5, which means all files which are managed by CVS/SVF. However, files can be marked so they're not part of a release by adding _DO_NOT_DISTRIBUTE_ after the file name. I've removed all the *.obj files from the distribution by adding _DO_NOT_DISTRIBUTE_ after their names. I also removed the old white-papers that might not apply to the current version of the library and documentation about chunking performance since it's wrong now that chunk caching is implemented. Everyone please check the files you're responsible for to make sure that they should really be part of a release. To get a list of all files use grep '^\.' MANIFEST | cut -f1 To get a list of files for distribution use: grep '^\.' MANIFEST | grep -v _DO_NOT_DISTRIBUTE_ (These commands assume tabs in the MANIFEST file. If the file might contain spaces then run it through `unexpand' or `tr' first). ./configure.in ./configure ./test/ragged.c Check for sigaction(). ./test/Makefile.in The `clean' target removes the timing tests.
* [svn-r569] Changes since 19980731Robb Matzke1998-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release Added ./Makefile to the distribution again -- it got lost in the changes last week although it isn't all that important a file since it gets clobbered by configure anyway. ./bin/trace ./doc/html/Filters.html ./doc/html/H5.format.html ./doc/html/H5.user.html ./src/H5.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ocomp.c ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c ./src/H5Zprivate.h ./src/H5Zpublic.h ./src/hdf5.h ./test/dsets.c ./tools/h5ls.c Added the data filter pipeline, a generalization of the compression stuff which allows things like checksums, encryption, compression, performance monitoring, etc. See ./doc/html/Filters.html for details -- it replaces the Compression.html doc. ./src/H5T.c Cleaned up debugging output. ./config/linux Added checks for egcs and pgcc and changed optimization flags for the compilers. ./src/H5G.c ./tools/h5dump.c Fixed compiler warnings in these files and others. ./configure.in ./src/H5private.h ./test/mtime.c Added a check for difftime() and defined HDdifftime() to do something else on systems that don't have difftime().
* [svn-r546] Changes since 19980724Robb Matzke1998-07-291-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5O.c ./src/H5Oprivate.h ./src/H5Omtime.c [NEW] ./src/H5private.h ./src/Makefile.in Added the modification time message. If an object header has this message then it's value is updated with the current time whenever anything changes in the object header. ./acconfig.h ./configure.in Alas, there seems to be no standard way to convert a string time like 19980727122800 in UTC to a time_t since mktime() only converts local times to time_t. So I've modified the configuration to check for various ways of getting the time zone information: * Added checks for the `tm_gmtoff' field of `struct tm'. * Added a check for the `timezone' global variable. * Added a check for `struct timezone'. * Added a check for BSDgettimeofday(). * Added a check for gettimeofday() although it doesn't actually set the timezone argument on some systems. * Added a check to see if `tm_zone' is a member of `struct tm'. * Added a check to see if `tzname' is a global variable. * Added a check to see if `struct tm' is defined in time.h or sys/time.h. It's not difficult to get the right UTC modification message into the object header, but some systems might have problems getting the right time back out (Irix64 is one) and those systems will report zero for the H5G_stat_t.mtime from an H5Gstat() call as if the mtime message isn't even present. It will, however, continue to be updated as normal. ./src/H5G.c ./src/H5Gpublic.h The H5G_stat_t struct now contains an `mtime' field which will hold the object modification time. If the object has no object modification time then the `mtime' will be initialized to zero. Fixed a bug in H5G_stat() that caused the `objno' field of the H5G_stat_t to be set incorrectly on some machines. ./src/H5D.c Writing to external datasets fail if the hdf5 file is not open for writing. A modification time message is added to the dataset object header when it's created and H5O_touch() is called from H5D_write() to update that message. ./src/H5T.c Fixed a bug in H5Tget_member_dims() that caused a segmentation fault if one of the output array arguments was the null pointer. Relaxed the member dimension checking in H5Tinsert_array() so it can also be used for scalar members. ./test/Makefile.in Added additional file names to the `mostlyclean' target. ./tools/h5dump.c ./tools/h5tools.h Increased the temporary buffer size to 1MB. Added support for printing compound data types with array members. When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape double quote characters. ./tools/h5ls.c Changed the output format a little because we were starting to get too much info to fit on a line. Without `--verbose' each object occupies one line of output. Otherwise, additional information is printed below the object name: object file address, comment, and modification time. If `--dump' is given then the data is printed after the other information. ./test/cmpd_dset.c Changed the way the dataset is initialized to be more uniform.
* [svn-r485] Changes since 19980710Robb Matzke1998-07-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in ./src/Makefile.in ./test/Makefile.in Tests are no longer installed for `make install'. Added a new target `make tests' that builds the tests but doesn't run them. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added detection of fork() and waitpid(). If present the contants HAVE_FORK and HAVE_WAITPID will be defined in H5config.h. ./test/dtypes.c Minor tweaks for systems that don't have fork() or waitpid(). ./MANIFEST ./tools [NEW] ./tools/Makefile.in [NEW] ./tools/h5debug.c [NEW] ./tools/h5import.c [NEW] ./tools/h5ls.c [NEW] ./tools/h5repart.c [NEW] Added a tools directory and moved tools from the src directory to here.
* [svn-r471] Changes since 19980708Robb Matzke1998-07-081-12/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Alphabetized. `d' comes before `e' :-) ./bin/release Added the `-batch' option which causes the script to not ask questions and to automatically update the minor version number and set the patch level back to `a'. This is intended to be used for the daily snapshots: #! /bin/sh set -e cd ~/hdf5 make distclean make test bin/release -batch tar compress gzip bzip2 mv ./releases/* /repository ./src/H5Z.c Removed warnings about unused variables when the zlib.h header file is present but libz.a isn't. ./INSTALL ./configure.in ./doc/html/tracing.html Made API tracing the default (you still need to define the HDF5_TRACE environment variable to get results) and change the name from `--disable-tracing' to `--disable-trace' to make it consistent with the other switches. Changed `site config file' to `host config file' to match the documentation. ./doc/html/H5.user.html Added a reference to the `tracing.html' file.
* [svn-r443] Changes since 19980630Robb Matzke1998-07-021-1/+1
| | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./examples/Makefile.in [NEW] Added a Makefile.in for the examples directory. To generate the Makefile run configure again.
* [svn-r429] Changes since 19980616Robb Matzke1998-06-171-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/tracing.html NEW This entire update is to make it possible for the library to print the name, arguments, and return value of every API call without requiring any extra work from developers or app programmers. This file describes how this all works. ./configure.in Added the `--enable-tracing' switch. If you use it then the library will include code to print API function names, argument names and values, and function return values. However, you must then turn on the tracing by setting the HDF5_TRACE environment variable to a file descriptor number. The default is `--disable-tracing' since enabling it causes a slight increase in library size and a slowdown resulting from an extra function call for each API function call (I couldn't even measure the slowdown :-) ./bin/trace NEW A perl script that synchronizes the H5TRACE() macro calls in the *.c files with the function return type and formal argument names and types. If you use GNU make and gcc then this will be done automatically, otherwise just invoke this script with the names of one or more .c files. You could do it by hand to, but encoding argument types is a little tricky at first. ./config/commence.in Added the $(TRACE) macro, which defaults to the no-op. Added -D_POSIX_SOURCE to the compiler command line. ./src/Makefile.in Override the default for $(TRACE). ./config/depend.in Automatically calls $(TRACE) to synchronize the H5TRACE() macros in any source file that changed. As with makefile dependencies, one way to force synchronization of all files is to remove the `.depend' file. ./MANIFEST Added new files. ./src/H5Eprivate.h Modified HRETURN_ERROR() and HRETURN() for tracing. ./src/H5.c ./src/H5private.h This is where the real tracing work really happens, in H5_trace(). ./src/H5A.c ./src/H5D.c ./src/H5G.c ./src/H5P.c ./src/H5S.c ./src/H5Z.c Added H5TRACE() calls to all API functions. You don't really need these changes if you don't want to merge your stuff because they can be generated automatically by going to the hdf5/src directory and saying ../bin/trace *.c ./src/H5T.c Added H5TRACE() calls. Other stuff below. ./src/H5E.c ./src/H5Epublic.h Added H5TRACE() calls. Created a type H5E_auto_t for the `func' argument of H5Eset_auto() and H5Eget_auto() to make those arguments easier to parse for tracing. It should also make it clearer for users that don't know how to read complicated ANSI data types. ./src/H5F.c Added H5TRACE() calls. Changed a couple `uintn' argument types in API functions to `unsigned int' since `uintn' part of the API. Changed a few "can't" and "cant" error messages to "unable to". ./src/H5Ipublic.h Removed H5_DIRECTORY from the H5I_group_t enum. It wasn't used anywhere. ./src/H5Tconv.c Removed an unused label. ./src/H5Fistore.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5T.c ./test/dsets.c ./test/dtypes.c Fixed a warning about a variable possibly used before it's initialized. Added __unused__ to turn off some unused argument warnings that pop up when debugging is turned off and optimizations are turned on.
* [svn-r428] Changes since 19980612Robb Matzke1998-06-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Tbit.c ./MANIFEST ./test/Makefile.in ./test/bittests.c NEW Finished the bit vector operations and added test cases. ./src/H5Tconv.c ./test/dtypes.c Finished integer->integer general conversion and added test cases. Overflows and underflows are handled by substituting the closest possible value. Examples: (unsigned)0xffff -> (unsigned) 0xff ( signed)0xffff -> (unsigned)0x0000 (unsigned)0xffff -> ( signed)0x7fff ( signed)0x7fff -> ( signed) 0x7f ( signed)0xbfff -> ( signed) 0xbf ( signed)0x8000 -> ( signed) 0x80 ./src/H5private.h Added definitions for MIN and MAX that take 3 or 4 arguments: MIN3(), MIN4(), MAX3(), MAX4(). Also added MIN2() and MAX2() as aliases for MIN() and MAX(). ./test/tattr.c Removed some redundant `&' operators. ./configure.in ./src/H5config.h.in [regenerated] ./src/H5.c Fixed warnings on DEC where long double is the same as double.
* [svn-r425] Changes since 19980610Robb Matzke1998-06-121-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- THIS CHECKIN IS FOR QUINCEY -- NOT EVERYTHING WORKS (but it compiles) MOST OF THE CHANGES ARE FOR BETTER TYPE CONVERSION IN THE NEXT ALPHA ./MANIFEST ./src/H5Tbit.c NEW ./src/Makefile.in Bit vector operations (not done yet) ./configure.in Added -lm to the library list, needed by bit-vector operations and conversion functions. Removed vestiges of PARALLEL_SRC no longer used by the makefiles. Albert came up with a better way (that actually works :-) ./src/H5D.c No code changes. Split a couple of long lines, refilled a couple multi-line comments. ./src/H5T.c ./src/H5Tpublic.h Fixed a bug reported by Jim Reus regarding conversion of compound data types whose members require conversions which are satisfied by as-yet unregistered soft conversion functions. Added H5T_IEEE architecture, but the funny-looking integer types will be changed to H5T_BE_ and H5T_LE_ architectures with the type names changed to match the H5T_NATIVE_ integers. Added an H5Tconvert() but it hasn't been documented or tested yet. ./src/H5Tconv.c ./src/H5Tpkg.h Registered conversion functions integer->integer (a general case) and integer->float (for a specific case). The integer->integer conversion depends on the bitvector operations which aren't finished yet and the int->float conversion hasn't been retested since it was borrowed from AIO. Don't look at them yet, they're ugly :-) ./src/H5detect.c Fixed a typo which caused the msb_pad field of an atomic type to not be initialized. ./test/dtypes.c Added a test for number conversions but it's commented out until the conversion stuff is truly working.
* [svn-r376] ./acconfig.hRobb Matzke1998-04-241-0/+22
| | | | | | | | | | | | | | | | | | | | | | | ./configure.in ./config/BlankForm ./src/H5.c Configure tries to figure out how to print `long long' types and then defines PRINTF_LL_WIDTH to be `ll' or `q' or something. It does this by running little sprintf() programs with various formats until it gets one that works. If this causes problems when cross compiling (like with parallel machines) then you may add the following to the appropriate config file: hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} or hdf5_cv_printf_ll=${hdf5_cv_printf_ll='q'} or hdf5_cv_printf_ll=${hdf5_cv_printf_ll='l'} ./config/intel-osf1 ./config/irix5.3 Updated these config files to match the others. This allows the `--enable-production' configure flag to work properly.
* [svn-r353] Changes since 19980414Robb Matzke1998-04-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Compression.html [NEW] ./html/Datasets.html ./html/H5.format.html ./html/H5.user.html Documented compression. A couple of the H5P functions aren't quite implemented yet but they're coming soon... ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocomp.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c [NEW] ./src/H5Zprivate.h [NEW] ./src/H5Zpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/dsets.c ./test/istore.c Compression is now mostly working. Don't try to open a compressed dataset though because the compression message won't be read. ./html/Datatypes.html ./html/H5.api.html ./src/H5.c ./src/H5private.h ./src/H5D.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added timing support. When compiled with H5T_DEBUG defined the library will print conversion bandwidths when the library closes. The H5Tregister functions take a string as the first argument so the statistics output is meaningful. ./MANIFEST Added new files. ./configure.in ./src/H5config.h.in Check for getrusage(). Check for compress2() in libz.a and the zlib.h header file. Added `z' to the debug list. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c ./src/debug.c Cleaned up some indentation and added support to print istore B-trees. From the debugger, give the B-tree address and the dimensionality from the layout message of the object header. ./src/h5ls.c The oid is printed as w:x:y:z where w and x are the file ID and y and z are the OID within the file. You can give z or y*2^32+z as an argument to the debugger to print the object header for the object. ./src/H5AC.c Cleaned up statistics and made them match those reported by H5T and H5Z. ./src/H5MM.c ./src/H5MMprivate.h ./src/H5Fistore.c Finally got rid of a couple of long-standing const cast warnings.
* [svn-r350] RUNTEST was hardcoded to "mpirun -np 1" due to some historical SGIAlbert Cheng1998-04-161-1/+1
| | | | | implementation. Changed it to take a user supplied value during configuration call.
* [svn-r339] Changes since 19980408Robb Matzke1998-04-091-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Osdspace.c ./html/H5.format.html In the past we were allowed to have >2GB files on a 32-bit machine as long as no dataset within the file was larger than 4GB (or whatever sizeof(size_t) is). That's been fixed now. All dataset size calculations are done with `hsize_t' which is normally defined as `unsigned long long'. ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5P.c ./src/H5Ppublic.h The file family member size can now be set/queried. The default is still 64MB, but it can be set to 1GB by saying: H5Pset_family (plist, 30, H5P_DEFAULT); When opening an existing file family the specified bits-per-member is ignored and the first member of the family determines the bits-per-member, which can be retrieved with H5Pget_family(). ./acconfig.h ./configure.in ./src/H5config.h ./src/H5public.h Added `--disable-hsizet' so that those with old GCC compilers (<2.8.1) can still compile the code. ./src/H5.c ./src/H5private.h Added HDfprintf() which works just like fprintf() except you can give `H' as a size modifier for the integer conversions and supply an `hsize_t' or `hssize_t' argument without casting it. For instance: hsize_t npoints = H5Sget_npoints(space); HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n", npoints, npoints); You can now give `%a' as a format to print an address, but all formating flags are ignored and it causes the return value of HDfprintf() to not include the characters in the address (but who uses the return value anyway :-). Example: H5G_t *grp; HDfprintf(stdout, "Group object header at %a\n", &(grp->ent.header)); Added HDstrtoll() which works exactly like [HD]strtol() except the result is an int64. ./src/debug.c Large addresses can now be entered from the command-line. Use either decimal, octal (leading `0') or hexadecimal (leading `0x') when giving the address. ./src/h5ls.c The printf format for dataset dimensions was changed to `%Hu' to support large datasets. ./test/big.c [NEW] A test for big datasets on 32-bit machines. This test is not run by default. Don't try to run it on an nfs-mounted file system or other file system that doesn't support holes because it creates two 32GB datasets of all zero.
* [svn-r338] Changes since 19980407Robb Matzke1998-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5S.c ./src/H5Sprivate.h ./src/H5Spublic.h ./src/H5Ssimp.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5private.h ./src/H5public.h ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tfile.c ./test/th5s.c Anything having to do with the size of a dataset now uses the types `hsize_t' and `hssize_t' which must be the same size and at least as large as `size_t'. This isn't fully tested yet, so hsize_t and hssize_t are defined as size_t and ssize_t in H5public.h. Setting them to larger values will trip up gcc versions less than 2.8.1 on x86 platforms. Documented unused function formals with `__unused__' before the formal name. This also has the effect of supressing warning messages for gcc since it's defined to be `__attribute__((unused))' in the H5private.h file. ./src/debug.c ./src/h5ls.c If the file name contains a `%' then the file is opened as a file family with H5P_DEFAULT for the file member access property list. ./src/h5ls.c The group name is optional, defaulting to `/'. ./src/hdf5.h Added some missing public header files.
* [svn-r337] Changes since 19980403Robb Matzke1998-04-071-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in Moved setting of compiler warning switches earlier in the file. Turned on more warning switches to gcc. ./config/linux Prints a warning if the gcc version is less than 2.8.1 since that version has problems with register allocation for `long long'. ./html/Datatypes.html Documented sharing of data types between datasets. ./src/H5G.c ./src/H5Gpublic.h Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard links. Still have soft links to do. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5D.c ./src/H5E.c ./src/H5Eprivate.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5HLprivate.h ./src/H5I.c ./src/H5Iprivate.h ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5Ssimp.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5detect.c ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tstab.c Fixed comparisons between signed and unsigned values. Fixed warnings about unused function arguments.
* [svn-r336] Changes since 19980402Robb Matzke1998-04-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/Makefile.in ./test/shtype.c [NEW] Added some tests for shared data types. ./configure.in Removed MF and HL from the default debug list since. MF because it hasn't been implemented yet and HL because it produces lots of annoying messages about adjusting the size of local heaps. ./src/H5F.c ./src/H5T.c ./src/H5Tprivate.h Fixed a bug with opening the same file twice. The first close on the file_id incorrectly closed shared data structs. Closing a file now correctly unshares data types that might be pointing into that file. ./src/H5T.c ./src/H5Tpublic.h Added an H5Tis_shared(). The caller supplies a file and a data type and the function returns true if the data type is currently marked for sharing in that file. ./src/H5AC.c ./src/H5F.c ./src/H5HL.c ./src/H5HG.c ./src/H5MF.c ./src/H5O.c We now detect errors sooner when writing to a read-only file. In the past, the error might not show up until the cached item was flushed, and it was sometimes possible to not even get an error! ./src/H5I.c ./src/H5Iprivate.h If the search function fails then H5I_search() returns failure. Also, the first argument for the search function isn't const anymore because we might want the search to have side effects (like calling H5T_unshare() for all shared data types whose file just closed).
* [svn-r335] Changes since 19980330Robb Matzke1998-04-031-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/Makefile.in ./test/Makefile.in Added new files. ./config/linux ./src/H5HL.c ./src/H5HLprivate.h ./src/H5MF.c ./src/H5MFprivate.h Added `-DH5HL_DEBUG -DH5MF_DEBUG' to the debug list. ./html/H5.format.html Updated shared object message information. ./src/H5D.c Datasets can now share data types. ./src/H5F.c Updated a comment that referred to H5ACC_WRITE. ./src/H5HG.c ./src/H5HGprivate.h Moved a few things around. Made debugging better so you can now give a collection address to ./src/debug and it shows some useful stuff. ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Onull.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c [NEW] ./src/H5Ostab.c Supports shared messages. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h The H5Tshare() function allows the user to give the library hints about how a data type will be used. ./test/shtype.c Tests the H5Tshare() function. ./test/gheap.c Tests the global heap. ./configure.in ./config/BlankForm [NEW] ./config/alpha-dec ./config/freebsd2.2.1 ./config/hpux10.20 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 Cleaned up lots of configuration stuff and made the site configuration files lots easier and more uniform. To make a new file grab the BlankForm and modify it. By default, debugging is turned on for most packages. Within a package one can use `#ifdef H5AC_DEBUG' to wrap debugging code. Other options are: --enable-debug --enable-debug=yes The default, most but not all packages. --disable-debug --enable-debug=no --enable-debug=none The symbol NDEBUG is defined and none of the package debug symbols. --enable-debug=all Debugging is turned on for all packages. This might produce lots of output. --enable-debug=g,d Debugging is turned on for H5G and H5D. A compile mode is also now supported --enable-production --enable-production=yes The library is compiled with optimizations turned on. The compiler flags are augmented by adding PROD_CFLAGS and PROD_CPPFLAGS which are defined in the site config file. --disable-production --enable-production=no The default. The library is compiled for development by including DEBUG_CFLAGS and DEBUG_CPPFLAGS defined in the site config file. This is usually just `-g'. --enable-production=profile --enable-production=pg Builds a library for profiling by including the flags from PROFILE_CFLAGS and PROFILE_CPPFLAGS defined in the site config file. This is usullay just `-pg' but it could include optimization flags as well depending on the type of profile one wants. In summary, configure by saying `./configure' and you'll get a development version of the library. Configure by saying `./configure --enable-production --disable-debug' and you'll get a production version with no debugging code.
* [svn-r327] Purpose:Paul Harten1998-03-241-1/+1
| | | | | | | | | | | | | | | | | | Bug fix Problem: Currently, RUNTEST cannot be set within the site config file because configure explicitly sets the variable RUNTEST = "" after reading in the site config file. Solution: (REQUIRED) A change was made in configure.in so that the variable RUNTEST is not explicitly set to "". "autoconf" was then run on configure.in to generate configure. Platform tested: TFLOPS Application server - sasn100
* [svn-r325] Changes since 19980317Robb Matzke1998-03-181-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure ./Makefile.in ./bin/distdep [NEW] ./config/conclude.in ./config/depend.in ./src/.distdep [NEW] ./test/.distdep [NEW] Added some code so non-GNU systems have a list of dependencies between the .c files and the .h files. Hopefully this works and y'all don't have to keep saying `make clean' each time you change a header. On systems with GNU make, GCC, and Perl, the dependency information is generated automatically from rules in config/depend.in as has always been done. But now extra files called `.distdep' (for `distributable dependencies) are left in each directory and these are part of CVS and thus releases. (A `make dep' will create dependencies on demand without doing anything else.) On systems lacking one or more of the tools above, the various `.distdep' files are inserted into the end of the Makefiles. If you do developement on one of these systems you'll have to update the `.distdep' and/or Makefile by hand, or wait until you have access to a GNU system and do a `make dep'.
* [svn-r322] Changes since 19980313Robb Matzke1998-03-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure ./test/iopipe.c Added check for system(3) ./config/freebsd2.2.1 ./config/linux Added -DH5D_DEBUG to the debug flags. ./src/H5D.c ./src/H5Dprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./html/Datasets.html Finally implemented strip mining in the I/O pipeline, placing a user-defined upper bound on the amount of temporary memory used by the pipeline. The default is 1MB type conversion and background buffers allocated/freed on demand. However, the size can be changed and/or application-allocated buffers supplied with H5Pset_buffers() called on the data transfer property list passed to H5Dread() and H5Dwrite(). Minor optimizations to H5Dread() and H5Dwrite(). More coming later... ./test/dsets.c Added calls to H5Pset_buffer() to test application-defined temporary buffers in the I/O pipeline. ./test/Makefile.in Removed `iopipe' from the list of confidence tests. Saying `make timings' in the test directory runs timing tests. I did this because (1) they don't really test anything new, and (2) they can take a long time to run.
* [svn-r311] Changes since 19980305Robb Matzke1998-03-061-1/+6
| | | | | | | | | | | | ---------------------- ./configure.in ./configure ./config/commence.in Added checking for `ar' then `xar' and set the $(AR) variable in the Makefiles. The check is not performed if $AR is already defined in the environment (including being set in a config file). We check for `-lcoug' for ASCI/Red.
* [svn-r306] Changes since 19980305Robb Matzke1998-03-051-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5D.c ./test/external.c A contiguous dataset can now be stored in external files in such a way that the slowest varying dimension can be increased after the dataset is created and even written. The user must have reserved enough space in the external file and the data space must allow an increase the the slowest varying dimension. See test_3() of ./test/external.c ./src/H5Oefl.c ./configure.in ./src/H5Fprivate.h Fixed an overflow bug with unlimited external storage. ./src/H5V.c Fixed a cast warning. ./test/dsets.c Make better use of automatic error reporting.
* [svn-r301] Changes since 19980226Robb Matzke1998-02-271-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release Changed default to not tag CVS sources. ./src/H5F.c Replaced a constant switch with preprocessor directives. Removed a local variable which was set but not used. ./src/H5Fprivate.h Changed `long long' to `int64' to get rid of ansi warnings in a few places. Fixed bugs in INT64DECODE() and UINT64DECODE() for big-endian architectures. This fixes all the bugs with the Irix -64 compile. ./src/H5F.c The default address and length sizes are set according to the sizeof(size_t) now that the bugs have been fixed. ./src/H5Fpublic.h Removed a trailing comma in an enumerated type. ./src/H5Fstdio.c ./src/H5Fsec2.c Added two more calls to fseek64() and lseek64(). Removed `long long' in place of `int64' to suppress -ansi warnings. ./src/H5P.c Replaced a FAIL with H5F_LOW_ERROR. ./src/H5private.h ./configure.in Increased version number to hdf5-1.0.1a since we've already released hdf5-1.0.0a. Include <sys/types.h>. Fixed indentation. Fixed detection of off64_t for old Irix systems where it might be a struct. ./src/Makefile.in Moved a comment from the shell to the makefile since some versions of sh barf on interactive comments. ./config/linux Allow overriding of the CC variable from the command-line. It still defaults to gcc but this allows us to specify a complete path from test scripts by saying: CC=/usr/local/tools/gnu/gcc sh configure
* [svn-r298] Changes since 19980219Robb Matzke1998-02-251-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Files.html ./src/H5C.c ./src/H5Cpublic.h ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5Fsplit.c ./test/tstab.c Added file-access property functions. The split driver takes file extensions as properties. ./src/H5A.c ./src/H5Aprivate.h Added some comments. Changed H5A_destroy() to call the free function on all the atoms that are destroyed. This fixes a bug where the file boot block isn't updated if the file isn't closed before calling exit(). Removed extra `*' and `&' from some places. ./src/H5AC.c Replaced an occurrence of NO_ADDR with NULL. ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h Data types of compound members are pointers. ./H5private.h Some changes to make lseek64() work on Irix 5.3 where header files don't realize that `long long' works. ./acconfig.h ./configure.in Removed definition for PHDF5 since it looks like everyone is useing HAVE_PARALLEL now. ./configure.in ./src/H5detec.c Added checks for gethostname() and getpwuid().
* [svn-r290] Changes since 19980206Robb Matzke1998-02-191-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./src/H5Fprivate.h ./src/H5Fsec2.c We now detect and use lseek64() on systems that have it (e.g., Irix64) and are able to generate >2GB files on Irix XFS file systems (and anything else that supports large files). This change also removed some warning messages from the Irix `-64' compiler. > $ ls -l istore.h5 > -rw-r--r-- 1 matzke meshtv 8605436856 Feb 17 14:03 istore.h5 ./configure.in ./src/H5Fprivate.h ./src/H5Fstdio.h We now detect and use fseek64() on systems that have it (e.g., Irix64) and are able to generate >2GB files on Irix XFS file systems (and anything else that supports large files). This change also removed some warning messages from the Iris `-64' compiler. ./src/H5E.c ./src/H5Epublic.h Added the H5E_OVERFLOW error to signal file address overflow. ./src/H5Fpublic.h ./examples/h5_chunk_read.c ./examples/h5_compound.c ./examples/h5_extend_write.c ./examples/h5_group.c ./examples/h5_read.c ./examples/h5_write.c ./html/Datasets.html ./html/Files.html ./html/H5.api.html ./html/H5.intro.html ./html/H5.sample_code.html ./html/ph5example.c ./html/review1.html ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/tfile.c ./test/th5p.c ./test/theap.c ./test/tohdr.c ./test/tstab.c ./testpar/phdf5.c Renamed file access constants to follow the naming scheme. Also changed the base names a little to be more accurate as to what they do. The old names H5ACC_WRITE and H5ACC_OVERWRITE will temporarily work. H5ACC_DEFAULT --> H5F_ACC_RDONLY for H5Fopen() H5ACC_DEFAULT --> H5F_ACC_EXCL for H5Fcreate() H5ACC_WRITE --> H5F_ACC_RDWR H5ACC_OVERWRITE --> H5F_ACC_TRUNC Albert or Kim: The H5ACC_INDEPENDENT and H5ACC_COLLECTIVE macros in H5Fpublic.h should be an enum typedef and have names more like H5F_MPIO_INDEPENDENT and H5F_MPIO_COLLECTIVE. Also change the access_mode argument of H5Cset_mpio(). H5Fcreate() and H5Fopen() are more strict now about which flags are acceptable for the operation. ./src/H5Fprivate.h ./src/H5F.c ./src/H5C.c Changed the file access template to make it more general. A union contains a struct for each type of low-level driver and the default template is initialized at run-time. ./src/H5Fpublic.h ./src/H5F.c Added H5Fget_access_template() and cleaned up H5Fget_create_template(). ./src/H5C.c The H5Cset_mpi() no longer trashes the file access template when an error is detected. We check for errors and *then* update the file access template. Added H5C_close() so Albert and Kim have a place to release the MPI communicator and info from the file access property list. Kim or Albert: I notice in H5Cset_mpi() you copy the MPI communicator. Do you need to do something similar in H5C_copy()? ./src/H5F.c Added more error checking for the file creation and access property lists because it used to be possible to make the library dump core by swapping the creation and access property list ID numbers of H5Fcreate(). ./test/istore.c ./test/tfile.c ./test/th5p.c ./test/theap.c ./test/tohdr.c ./test/tstab.c ./testpar/testphdf5.c One must pass H5C_DEFAULT as the file creation or access property list in order to get the default property list. It is no longer possible to pass zero or any other arbitrary bad object ID. ./src/H5Fcore.c ./src/H5Ffamly.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5MF.c The file access property list is passed to all H5F_low_...() functions and to the drivers. ./src/H5Fcore.c The block size can be set at run time on a per-file basis instead of at compile time across all files. The "5000 items in a group test" now takes 1.6 seconds. ./src/H5private.h Removed inclusion of mpi.h and mpio.h since they're included from H5public.h. ./src/H5Cpublic.h ./src/H5C.c Added H5Cset_stdio(), H5Cset_sec2(), H5Cset_core(), H5Cset_split(), and H5Cset_family() in addition to the H5Cset_mpio() that Kim and Albert already wrote. We still need the H5Cget_driver() and an H5Cget...() counterpart for each of those functions. The split and family drivers still need a little work but I'm checking this in anyway.
* [svn-r269] Added more searching for config files. The order is now:Robb Matzke1998-02-131-2/+17
| | | | | | | | | | cpu-vendor-os vendor-os cpu-os cpu-vendor os vendor cpu
* [svn-r249] configure.in configure:Albert Cheng1998-02-111-3/+3
| | | | | | | Changed default RUNTEST to 'mpi -np 1'. src/Makefile.in: Use $(RUNTEST) to run programs if enable-parallel is on.
* [svn-r213] Changes since 19980130Robb Matzke1998-02-031-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added H5Fmpio.c. One way to check that you've properly included new files is to run `./bin/release none', then unpack the resulting tar file somewhere and try to compile it. The tar file will be ./releases/hdf-5.0.0a.tar. ./config/freebsd2.2.1 ./config/linux Added `-ansi' ./acconfig.h Added definitions for PHDF5 and HAVE_PARALLEL. ./configure.in Added minimal support for parallel build. Kim and Albert will have to flesh this out or I can do it if they're more specific about what they need. ./config/commence.in Added default value for $(RUNTEST) ./config/conclude.in `make test' uses value of $(RUNTEST) to run test cases. ./src/Makefile.in Added PARALLEL_SRC for conditional compilation of H5Fmpio.c ./src/H5D.c ./src/H5Dpublic.h Added H5Dget_type() for Elena NOTE: These changes require that configure be rerun. If you're using GNU make it will happen automatically, otherwise do it by hand.
* [svn-r133] ./MANIFESTRobb Matzke1997-10-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./src/Makefile.in Added new files. ./html/H5.apiv2.html Added documentation for group stuff. ./src/H5private.h ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Flow.c NEW ./src/H5Fprivate.h ./src/H5Fsec2.c NEW ./src/H5Fstdio.c NEW Low-level file driver is selected at runtime. ./src/H5Fprivate.h Got rid of `shift >= sizeof operand' warnings on big endian machines. ./src/H5Fistore.c ./test/istore.c Still working on indexed storage... ./src/H5H.c ./src/H5Hprivate.h Removed alignment constraints.
* [svn-r129] Changes since 19970916Robb Matzke1997-10-201-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed backslashes in sed script because the H5Gnode.c dependency info was disappearing. You'll have to rerun config.status to rebuild the Makefiles unless you use gnu make. ./config/conclude.in Also removes emacs backup files, TAGS, and svf backup files. ./config/linux Grouped gcc flags and added provisions for debugging vs. production. ./html/H5.format.html Updated messages 0x0008, 0x0009, and 0x000A. ./html/storage.html Documentation describing storage schemes. ./src/Makefile.in ./test/Makefile.in New source files. ./src/H5A.c ./src/H5Apublic.h ./src/H5C.c Changed VOIDP to void* in a couple places. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/H5H.c ./src/H5O.c Removed `const' from some variables because H5G_node_found() wanted to modify it's udata argument. Removing const there caused it to cascade to these other locations. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5B.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5H.c ./src/H5O.c Added an extra argument to H5AC_find_f() and H5AC_protect(). This arg gets passed to the load() method. Also added an extra argument to the H5AC_find() macro. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra argument passed to the sizeof_rkey() method. ./src/H5Fprivate.c ./src/H5Fistore.c (new) Added indexed I/O operations. ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h Beginning to add H5G_open/close and related bug fixes. ./src/H5Oprivate.h ./src/H5Oistore.c (new) Added the H5O_ISTORE messsage (0x0008) for indexed storage of objects. ./src/H5private.h Added extra braces around both sides of the FUNC_ENTER() and FUNC_LEAVE() macros so FUNC_ENTER() can appear before declarations or after executable statements the second case is used by H5G_namei() to initialize output arguments to sane values before FUNC_ENTER() might return failure. int f () { int decl1; printf ("This happens before FUNC_ENTER()\n"); FUNC_ENTER (...); int another_declaration; ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c Extra arguments for key encoding and decoding. ./src/H5E.c ./src/H5Epublic.h ./src/H5Fistore.c ./src/H5Oistore.c ./src/H5Oprivate.h Indexed, chunked, sparse storage (not ready for general consumption yet). ./src/H5V.c (new) ./src/H5Vprivate.h (new) ./test/hyperslab.c (new) Vector, array, and hyperslab functions. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5Gnode.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Added functionality for indexed storage. ./src/H5F.c Fixed problems with seek optimizing. Recommend we disable it until we can implement it in the file/address class since all of HDF5 must be aware of it. ./src/H5O.c Fixed comeent speling erorr :-) ./MANIFEST Added new files. ./config/conclude.in Added the word `Testing' to the test cases. So if a test program is called hyperslab then the make output will contain the line `Testing hyperslab'. ./config/linux The default file I/O library is Posix section 2 on my linux machine so I can do some I/O performance testing. ./src/H5C.c ./src/H5Cprivate.h ./src/H5Cpublic.h Added ability to set size of indexed-storage B-tree. ./src/H5D.c ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5Gshad.c ./src/H5Gstab.c ./test/stab.c Changed `directory' to `group' in numerous places. ./src/H5private.h The FILELIB constant can be set on the compile command-line. ./src/istore.c NEW Tests for indexed storage.
* [svn-r43] *** empty log message ***Robb Matzke1997-08-281-1/+17
|
* [svn-r32] ./INSTALL NEWRobb Matzke1997-08-151-0/+136
Instructions for end users. ./INSTALL_MAINT NEW Instructions and hints for maintainers. ./MANIFEST NEW A list of names of files that are part of the HDF5 distribution. ./Makefile.in NEW Top-level makefile template. See INSTALL and/or INSTALL_MAINT for instructions on how to generate the Makefile from this file. ./configure NEW ./configure.in NEW Configuration shell script generated from configure.in. ./Makefile Removed from CVS. This file is now generated by running configure.