summaryrefslogtreecommitdiffstats
path: root/src/H5Farray.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r5530] Purpose:Bill Wendling2002-06-041-2/+2
| | | | | | | | | | | | | | | Code Cleanup Description: Removed some compiler warnings. Solution: In a few cases, NULL was being returned when a FAIL was supposed to be returned instead. There were some header files which needed to be included in a few of the sources. A couple of if-then statements had assignments in the conditional part. The compiler warned that they should have extra "()"s around them. Made the code check the values instead. Platforms tested: Linux (parallel) Modi4 (parallel)
* [svn-r5471] Purpose:Quincey Koziol2002-05-291-3/+3
| | | | | | | | | | | | | | | | Code cleanup Description: Broke the FUNC_ENTER macro into several macros, with more specialized uses (which followup mail will describe). This was designed to move most/all of the checks which could be done at compile time to that point, instead of needlessly performing them (over & over :-) at run-time. This reduces the library's size (and thus staticly linked binaries) and has a minor speedup effect also. Platforms tested: IRIX64 6.5 (modi4) with parallel & FORTRAN enabled, and additional testing on FreeBSD and Solaris immediately after the checkin.
* [svn-r5261] Purpose:Quincey Koziol2002-04-251-33/+0
| | | | | | | | | | Code cleanup Description: Remove more debugging printf's that were ifdef'd out. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5259] Purpose:Quincey Koziol2002-04-251-99/+76
| | | | | | | | | | | | | | | | Code cleanup Description: Previously, the I/O pipeline (pline), external file list (efl) and fill- value (fill) structs were passed down the raw data function call chain, even into and/or through functions which didn't use them. Since all three of these pieces of information are available from the dataset creation property list, just pass the dataset creation property list down the function call chain and query for the information needed in a particular function. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5130] Purpose:Quincey Koziol2002-04-021-36/+17
| | | | | | | | | | | | | | | | | | | | | | Bug Fix & Feature Description: The selection offset was being ignored for optimized hyperslab selection I/O operations. Additionally, I've found that the restrictions on optimized selection I/O operations were too strict and found a way to allow more hyperslabs to use the optimized I/O routines. Solution: Incorporate the selection offset into the selection location when performing optimized I/O operations. Allow optimized I/O on any single hyperslab selection and also allow hyperslab operations on chunked datasets. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r4643] Purpose:Quincey Koziol2001-11-271-6/+5
| | | | | | | | | | | | | | | | | | | | | | Code cleanup Description: Windows is generating hundreds of warnings from some of the practices in the library. Mostly, they are because size_t is 32-bit and hsize_t is 64-bit on Windows and we were carelessly casting the larger values down to the smaller ones without checking for overflow. Also, some other small code cleanups,etc. Solution: Re-worked some algorithms to eliminate the casts and also added more overflow checking for assignments and function parameters which needed casts. Kent did most of the work, I just went over his changes and fit them into the the library code a bit better. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4633] Purpose:Quincey Koziol2001-11-211-18/+21
| | | | | | | | | | | Bug fix. Description: Builds for parallel testing exposed some places that I forgot to get rid of using IDs in internal APIs. Solution: Switch sections of code to use proper data structures instead of IDs. Platforms tested: Parallel compiles from daily tests.
* [svn-r4620] Purpose:Quincey Koziol2001-11-201-2/+2
| | | | | | | | | Code cleanup Description: Get rid of IDs from internal function calls and some small cleanups from the old-stype => generic property list conversion. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4482] Purpose:Quincey Koziol2001-09-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | Kludge Description: Since we're only about halfway through converting the internal use of property lists from the "old way" to the generic property lists, we turned off snapshots to avoid exposing lots of API changes to users, until the APIs settled down. Getting the snapshots rolling again seems to have become a priority, so some changes are going to have to be made now that were going to be postponed until we were completely finished with the conversion. This requires that the old API functions be able to deal with both the old and new property lists smoothly. Solution: Kludge together the property list code so that they can transparently handle dealing with both the old and new property lists Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4355] Purpose:Quincey Koziol2001-08-141-9/+9
| | | | | | | | | | | | | | | | | | | | | | Code cleanup (sorta) Description: When the first versions of the HDF5 library were designed, I remembered vividly the difficulties of porting code from a 32-bit platform to a 16-bit platform and asked that people use intn & uintn instead of int & unsigned int, respectively. However, in hindsight, this was overkill and unnecessary since we weren't going to be porting the HDF5 library to 16-bit architectures. Currently, the extra uintn & intn typedefs are causing problems for users who'd like to include both the HDF5 and HDF4 header files in one source module (like Kent's h4toh5 library). Solution: Changed the uintn & intn's to unsigned and int's respectively. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4326] Purpose:Quincey Koziol2001-08-101-5/+5
| | | | | | | | | | Code cleanups, mostly.. Description: Work on pacifying the SGI compiler to get the generic properties working correctly with --enable-parallel and --enable-fortran. It's not quite fixed yet, but I need to head home and these patches help... :-/ Platforms tested: IRIX64 6.5 (modi4)
* [svn-r4324] Purpose:Quincey Koziol2001-08-101-34/+50
| | | | | | | | | | | | | | | | | | | | | | | | New Features! Description: Start migrating the internal use of property lists in the library from the older implementation to the new generic property lists. Currently, only the dataset transfer property lists are migrated to the new architecture, all the rest of the property list types are still using the older architecture. Also, the backward compatibility features are not implemented yet, so applications which use dataset transfer properties may need to make the following changes: H5Pcreate(H5P_DATASET_XFER) -> H5Pcreate_list(H5P_DATASET_XFER_NEW) and H5Pclose(<a dataset transfer property list>) -> H5Pclose_list(id) This still may have some bugs in it, especially with Fortran, but I should be wrapping up those later today. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4181] Purpose:Quincey Koziol2001-07-101-4/+8
| | | | | | | | | Bug Fix, Code Cleanup, Code Optimization, etc. Description: Fold in the hyperslab speedups, clean up compile warnings and change a few things from using 'unsigned' or 'hsize_t' to use 'size_t' instead. Platforms tested: FreeBSD 4.3 (hawkwind), Solaris 2.7 (arabica), Irix64 6.5 (modi4)
* [svn-r3885] Purpose:Quincey Koziol2001-05-021-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | Document bug fix Description: IMPORTANT! IMPORTANT! IMPORTANT! A case where metadata in a file could get corrupted in certain unusual sitations was detected and fixed. In certain circumstances, metadata could get cached in the raw data cache, and if that particular piece of metadata was updated on disk while incorrectly cached, the new metadata would get overwritten with the stale metadata from the raw data cache when it was flushed out. Additionally, I've patched up the raw data cache to be smarter about how much it caches and how much I/O it triggers, leading to some speedups. Solution: Changed the raw data I/O routines which perform caching to require a parameter with the size of the dataset being accessed and limited the cache to no more than that many bytes. Platforms tested: FreeBSD 4.3 (hawkwind)
* [svn-r3781] Purpose:Bill Wendling2001-04-051-14/+14
| | | | | | | | | | | | | | | | | | Update Description: Changed #include <hdf_file.h> construct to #include "hdf_file.h" so that the GNU compiler can more easily pick up the dependencies which it places in the .depend and Dependencies files. Also regenerated the Dependencies to go along with this. Platforms tested: Linux
* [svn-r3252] Purpose:Quincey Koziol2001-01-091-283/+290
| | | | | | | | | | | | | Code cleanup. Description: Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the extra warnings. Including a few show-stoppers for compression on IRIX machines. Solution: Changed lots of variables' types to more sensible and consistent types, more range-checking, more variable typecasts, etc. Platforms tested: FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
* [svn-r3005] Purpose:Quincey Koziol2000-11-271-1/+1
| | | | | | | | Backward compatibility code Description: Add in code to allow the library to emulate the v1.2 API and behavior. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2722] Purpose:Quincey Koziol2000-10-241-1/+1
| | | | | | | | | | Feature symmetry Description: A while ago I needed to get the 'type' of data being accessed during writes to the VFL driver, so I put in code to get the information down there. Albert asked for the same information during reads, so I've added that in. Tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2657] Quincey Koziol2000-10-101-5/+5
| | | | | | | | | | | | Purpose: Parallel Bug Fixes Description: Was out of sync with header file re-arrangements I checked in last night. Solution: Fixed to use new header files, etc. Platforms tested: O2K (modi4)
* [svn-r2652] Purpose:Quincey Koziol2000-10-101-6/+7
| | | | | | | | | | | | | | | Maintainance & performance enhancements Description: Re-arranged header files to protect private symbols better. Changed optimized regular hyperslab I/O to compute the offsets more efficiently from previous method of using matrix operations. Added sequential I/O operations at a more abstract level (at the same level as H5F_arr_read/write), to support the optimized hyperslab I/O. Platforms tested: Solaris 2.6 (baldric) & FreeBSD 4.1.1 (hawkwind)
* [svn-r2611] Purpose:Quincey Koziol2000-09-281-249/+8
| | | | | | | | | | | | | Rearrange code Description: The data sieve buffering code for contiguously stored datasets was wedged in the H5F_arr_read/H5F_arr_write routines. Solution: Created a new H5Fcontig.c to hold I/O routines for contiguously stored datasets (like H5Fistore.c for chunked dataset I/O routines) and moved data sieving code into those routines. Platforms tested: Solaris 2.6 (i.e. baldric)
* [svn-r2600] Purpose:Quincey Koziol2000-09-261-20/+278
| | | | | | | | | | | Implemented new feature Description: Added data sieve buffering code to raw I/O data path. This is enabled for all the VFL drivers except the mpio & core drivers. Also added two new API functions to control the sieve buffer size: H5Pset_sieve_buf_size() and H5Pget_sieve_buf_size(). Platforms tested: Solaris 2.6 (i.e. baldric)
* [svn-r2495] More type of data parameter additions for H5F_block_write.Quincey Koziol2000-08-311-1/+1
|
* [svn-r1925] DPSS is checked in.Raymond Lu1999-12-211-0/+17
|
* [svn-r1881] Changed all the HAVE_PARALLEL and HAVE_GASS macros to the newAlbert Cheng1999-12-171-8/+8
| | | | form of H5_HAVE_PARALLEL and H5_HAVE_GASS.
* [svn-r1689] Mainly adding support for "native" variable-length strings (C ↵Quincey Koziol1999-09-291-3/+3
| | | | | | | | only currently), but I fixed lots of misc. compiler warnings in other code and also tracked down the memory overwrite bug that was causing the development branch to core dump on most machines.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-113/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1549] Changes since 19990728Robb Matzke1999-07-281-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c [1.3] ./src/H5D.c [1.3] ./src/H5F.c [1.3] ./src/H5Farray.c [1.3] ./src/H5Fcore.c [1.3] ./src/H5Ffamily.c [1.3] ./src/H5Fistore.c [1.3] ./src/H5Flow.c [1.3] ./src/H5Fmpio.c [1.3] ./src/H5Fprivate.h [1.3] ./src/H5Fsplit.c [1.3] ./src/H5Fstdio.c [1.3] ./src/H5G.c [1.3] ./src/H5HG.c [1.3] ./src/H5HL.c [1.3] ./src/H5MF.c [1.3] ./src/H5O.c [1.3] ./src/H5Odtype.c [1.3] ./src/H5Oefl.c [1.3] ./src/H5P.c [1.3] ./src/H5Smpio.c [1.3] ./src/H5T.c [1.3] ./src/H5detect.c [1.3] ./tools/h5debug.c [1.3] Some of the H5F_addr_* functions were optimized away. ./src/H5D.c [1.3] Fixed the return values from NULL to FAIL on one MPI-IO function.
* [svn-r1548] Changes since 19990727Robb Matzke1999-07-281-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c [1.3] ./src/H5AC.c [1.3] ./src/H5ACprivate.h [1.3] ./src/H5B.c [1.3] ./src/H5Bprivate.h [1.3] ./src/H5D.c [1.3] ./src/H5F.c [1.3] ./src/H5Farray.c [1.3] ./src/H5Fcore.c [1.3] ./src/H5Ffamily.c [1.3] ./src/H5Fistore.c [1.3] ./src/H5Flow.c [1.3] ./src/H5Fmpio.c [1.3] ./src/H5Fprivate.h [1.3] ./src/H5Fsec2.c [1.3] ./src/H5Fsplit.c [1.3] ./src/H5Fstdio.c [1.3] ./src/H5G.c [1.3] ./src/H5Gent.c [1.3] ./src/H5Gnode.c [1.3] ./src/H5Gprivate.h [1.3] ./src/H5Gstab.c [1.3] ./src/H5HG.c [1.3] ./src/H5HGprivate.h [1.3] ./src/H5HL.c [1.3] ./src/H5HLprivate.h [1.3] ./src/H5MF.c [1.3] ./src/H5MFprivate.h [1.3] ./src/H5O.c [1.3] ./src/H5Oattr.c [1.3] ./src/H5Ocont.c [1.3] ./src/H5Odtype.c [1.3] ./src/H5Oefl.c [1.3] ./src/H5Olayout.c [1.3] ./src/H5Oprivate.h [1.3] ./src/H5Oshared.c [1.3] ./src/H5Ostab.c [1.3] ./src/H5P.c [1.3] ./src/H5R.c [1.3] ./src/H5Smpio.c [1.3] ./src/H5T.c [1.3] ./src/H5Tvlen.c [1.3] ./src/H5private.h [1.3] ./test/dtypes.c [1.3] ./test/gheap.c [1.3] ./test/istore.c [1.3] ./test/lheap.c [1.3] ./test/ohdr.c [1.3] ./tools/h5debug.c [1.3] File addresses (the `haddr_t' type) are passed by value instead of by reference. The type is no longer a struct. This is one of the preliminary changes needed for the Virtual File Layer stuff. ./src/H5Fprivate.h [1.3] ./src/H5Flow.c [1.3] Some address functions were rewritten as macros.
* [svn-r1216] Changes since 19990423Robb Matzke1999-04-261-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c Changed H5F_block_read/write() to take a file transfer property list instead of just a parallel I/O mode. This will allow us to pass additional parameters to the I/O functions without having so many arguments to worry about. This fixes a bug I introduced last Friday for parallel HDF5 ./src/H5B.c Fixed decoding of B-tree keys when iterating through the leaves of the B-tree. This fixes a bug for applications that are adding new entries to groups and also listing the groups.
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-231-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1182] Changed name of PABLO Mask to simplify automatic definitions.Dan Wells1999-04-141-1/+1
|
* [svn-r936] Changes since 19981119Robb Matzke1998-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r797] Changed comments from returning "SUCCEED/FAIL" to ↵Quincey Koziol1998-10-261-9/+3
| | | | | | "non-negative/negative" and also fixed a few more explicit checks against FAIL.
* [svn-r733] Robb Matzke1998-10-011-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19980930 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ofill.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/Makefile.in Added fill values as documented in previous e-mails. They only work for chunked datasets so far. ./src/H5E.c ./src/H5Epublic.h ./src/H5P.c Changed H5E_TEMPLATE to H5E_PLIST. ./src/H5Omtime.c ./src/H5V.c Fixed a typo in a comment. ./src/H5Tconv.c Fixed a bug in compound type conversions that caused an assertion to fail.
* [svn-r730] Changes since 19980928Robb Matzke1998-09-301-35/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name. Added a few missing files. Are all of these supposed to be distributed? ./tools/testfiles/h5dumptst.c + ./tools/testfiles/tall-1.ddl + ./tools/testfiles/tall-2.ddl + ./tools/testfiles/tall-3.ddl ./tools/testfiles/tall.ddl ./tools/testfiles/tall.h5 + ./tools/testfiles/tattr-1.ddl + ./tools/testfiles/tattr-2.ddl + ./tools/testfiles/tattr-3.ddl + ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tattr.ddl ./tools/testfiles/tattr.h5 + ./tools/testfiles/tdset-1.ddl + ./tools/testfiles/tdset-2.ddl + ./tools/testfiles/tdset-3.ddl + ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tdset.ddl ./tools/testfiles/tdset.h5 + ./tools/testfiles/tgroup-1.ddl + ./tools/testfiles/tgroup-2.ddl + ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tgroup.ddl ./tools/testfiles/tgroup.h5 + ./tools/testfiles/tslink-1.ddl + ./tools/testfiles/tslink-2.ddl ./tools/testfiles/tslink.ddl ./tools/testfiles/tslink.h5 ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Gstab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/istore.c Implemented split ratios as documented in previous e-mails. Frank, the new API functions are H5Pget_btree_ratios() and H5Pset_btree_ratios(). ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h Added more type checking for the data transfer property list passed to these functions. ./src/H5D.c Added a dataset transfer property list as an argument to H5D_allocate() for the parallel version in order to pass split ratios down to H5F_istore_lock(). Eventually we won't need the split ratios for H5D_allocate() because we'll build a completely full B-tree from the leaves up, but it might be useful to have other transfer properties at that level anyway. I always caled H5D_allocate() with &H5D_dflt_xfer. ./MANIFEST ./test/Makefile.in ./test/overhead.c [NEW] Added an `overhead' test run by `make timings'.
* [svn-r569] Changes since 19980731Robb Matzke1998-08-051-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/release Added ./Makefile to the distribution again -- it got lost in the changes last week although it isn't all that important a file since it gets clobbered by configure anyway. ./bin/trace ./doc/html/Filters.html ./doc/html/H5.format.html ./doc/html/H5.user.html ./src/H5.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ocomp.c ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c ./src/H5Zprivate.h ./src/H5Zpublic.h ./src/hdf5.h ./test/dsets.c ./tools/h5ls.c Added the data filter pipeline, a generalization of the compression stuff which allows things like checksums, encryption, compression, performance monitoring, etc. See ./doc/html/Filters.html for details -- it replaces the Compression.html doc. ./src/H5T.c Cleaned up debugging output. ./config/linux Added checks for egcs and pgcc and changed optimization flags for the compilers. ./src/H5G.c ./tools/h5dump.c Fixed compiler warnings in these files and others. ./configure.in ./src/H5private.h ./test/mtime.c Added a check for difftime() and defined HDdifftime() to do something else on systems that don't have difftime().
* [svn-r519] Strided hyperslab selections now work.Quincey Koziol1998-07-201-0/+10
|
* [svn-r451] Completely tore out existing dataspace API and replaced with code ↵Quincey Koziol1998-07-061-0/+14
| | | | | | | | to match API defined in the html/Dataspaces.html document. This code does not include support for strides, merging selections, or permutations of coordinates yet, but it's a drop-in replacement for the existing API with the same features.
* [svn-r411] Added data-transfer-mode to various function to specify whichAlbert Cheng1998-06-071-24/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mode to use for data transfer. Currently, INDEPENDENT transfer is the default mode. Collective is supported for files opened via the MPIO driver. Specific changes to individual files follow. H5D.c: Replaced previous kludge of passing xfer_mode via the file access_mode with xfer_mode function parameter all the way to the low level I/O drivers. H5Dprivate.h: The H5D_xfer_t.xfer_mode is now used in serial and parallel modes. Removed the "HAVE_PARALLEL" macro condition to support it. H5Dpublic.h: Added H5D_XFER_DFLT as a new value for H5D_transfer_t and removed the HAVE_PARALLEL condition macro to make the H5D_transfer_t definition available to both serial and parallel version. H5B.c: H5F.c: H5Farray.c: H5Fcore.c: H5Ffamily.c: H5Fistore.c: H5Flow.c: H5Fmpio.c: H5Fsec2.c: H5Fsplit.c: H5Fstdio.c: H5Gnode.c: H5HG.c: H5HL.c: H5O.c: H5Sprivate.h: H5Ssimp.c: debug.c: Added xfer_mode to the argument lists of the following routines to specify data transfer mode. Then updated calls to these routines with appropriate transfer mode. Whenever cases that collective mode is inappropriate (e.g. object header read-write, flush), H5D_XFER_DFLT is used. The H5D_XFER_DFLT mode is currently acting the same as the independent mode. H5F_block_read H5F_block_write H5F_arr_read H5F_arr_write H5F_core_read H5F_core_write H5F_fam_read H5F_fam_write H5F_mpio_read H5F_mpio_write H5F_low_write H5F_low_read H5F_sec2_read H5F_sec2_write H5F_split_read H5F_split_write H5F_stdio_read H5F_stdio_write H5S_simp_fgath H5S_simp_fscat H5S_simp_read H5S_simp_write H5Fprivate.h: H5P.c: Removed access_mode field from struct H5F_access_t type. The access-mode was the initial design to control independent or collective I/O mode. It is now supported by the data transfer mode.
* [svn-r409] Changes since 19980604Robb Matzke1998-06-051-4/+6
| | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Datatypes.html Updated documentation for named data types and type sharing. ./src/H5Farray.c Split a couple long lines. ./src/H5T.c The H5T_copy() demotes immutable types to read-only types so they're cleaned up properly and memory is not leaked. ./test/dtypes.c Modified to be more consistent with other tests. Removed all internal header files, constants, types, and functions calls since the API is now complete enough to test everything. Temporary files are now removed.
* [svn-r404] Updated parallel code to reflect the changes in the H5F_t structureAlbert Cheng1998-05-291-8/+8
| | | | | in which access_parms is now a pointer to a struct (was a struct before.)
* [svn-r353] Changes since 19980414Robb Matzke1998-04-171-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Compression.html [NEW] ./html/Datasets.html ./html/H5.format.html ./html/H5.user.html Documented compression. A couple of the H5P functions aren't quite implemented yet but they're coming soon... ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocomp.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c [NEW] ./src/H5Zprivate.h [NEW] ./src/H5Zpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/dsets.c ./test/istore.c Compression is now mostly working. Don't try to open a compressed dataset though because the compression message won't be read. ./html/Datatypes.html ./html/H5.api.html ./src/H5.c ./src/H5private.h ./src/H5D.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added timing support. When compiled with H5T_DEBUG defined the library will print conversion bandwidths when the library closes. The H5Tregister functions take a string as the first argument so the statistics output is meaningful. ./MANIFEST Added new files. ./configure.in ./src/H5config.h.in Check for getrusage(). Check for compress2() in libz.a and the zlib.h header file. Added `z' to the debug list. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c ./src/debug.c Cleaned up some indentation and added support to print istore B-trees. From the debugger, give the B-tree address and the dimensionality from the layout message of the object header. ./src/h5ls.c The oid is printed as w:x:y:z where w and x are the file ID and y and z are the OID within the file. You can give z or y*2^32+z as an argument to the debugger to print the object header for the object. ./src/H5AC.c Cleaned up statistics and made them match those reported by H5T and H5Z. ./src/H5MM.c ./src/H5MMprivate.h ./src/H5Fistore.c Finally got rid of a couple of long-standing const cast warnings.
* [svn-r351] Removed the access_mode argument from H5Pset_mpi which was laterAlbert Cheng1998-04-171-10/+10
| | | | | | | | | | | | | | | | | used to open an HDF5 file with MPIO access. The design has changed to provide access-mode controll (independent or collective access) as an argument in the H5D read/write calls. Also removed the macros H5FACC_INDEPENDENT and H5FACC_COLLECTIVE. The original thinking was to define how a file is independent or collective access. They are replaced by the enum H5D_transfer_t with values of H5D_XFER_INDEPENDENT and H5D_XFER_COLLECTIVE. These values are used in the H5Pset_xfer to setup a data transfer property list to be used during the H5D read/write calls. The original access_mode field in the File access structure is still there. It would be removed soon once the transfer control can be passed down to the low level I/O routines.
* [svn-r343] First implementation of collective access support.Albert Cheng1998-04-131-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | H5D.c Changed H5D_write and H5D_read to recognize collective transfer requests. Current algorithm puts the xfer-mode in the file->mpio structure. Not thread safe. Need to revise it to pass transfer parameter as a function parameters to the lower levels. H5Dprivate.h H5Dpublic.h Added xfer_mode to the transfer property list structure. Added defination of transfer modes, H5D_XFER_INDEPENDENT and H5D_XFER_COLLECTIVE. H5Farray.c Added code to handle collective access requests. Currently works for one contiguous block at a time. Need to revise it with the MPIO low level calls to combine all blocks as one truely collective call. H5P.c H5Ppublic.h Added H5Pset_xfer and H5Pget_xfer routines that can set and get the transfer mode of a data transfer property list.
* [svn-r338] Changes since 19980407Robb Matzke1998-04-081-20/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5S.c ./src/H5Sprivate.h ./src/H5Spublic.h ./src/H5Ssimp.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5private.h ./src/H5public.h ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tfile.c ./test/th5s.c Anything having to do with the size of a dataset now uses the types `hsize_t' and `hssize_t' which must be the same size and at least as large as `size_t'. This isn't fully tested yet, so hsize_t and hssize_t are defined as size_t and ssize_t in H5public.h. Setting them to larger values will trip up gcc versions less than 2.8.1 on x86 platforms. Documented unused function formals with `__unused__' before the formal name. This also has the effect of supressing warning messages for gcc since it's defined to be `__attribute__((unused))' in the H5private.h file. ./src/debug.c ./src/h5ls.c If the file name contains a `%' then the file is opened as a file family with H5P_DEFAULT for the file member access property list. ./src/h5ls.c The group name is optional, defaulting to `/'. ./src/hdf5.h Added some missing public header files.
* [svn-r337] Changes since 19980403Robb Matzke1998-04-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in Moved setting of compiler warning switches earlier in the file. Turned on more warning switches to gcc. ./config/linux Prints a warning if the gcc version is less than 2.8.1 since that version has problems with register allocation for `long long'. ./html/Datatypes.html Documented sharing of data types between datasets. ./src/H5G.c ./src/H5Gpublic.h Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard links. Still have soft links to do. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5D.c ./src/H5E.c ./src/H5Eprivate.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5HLprivate.h ./src/H5I.c ./src/H5Iprivate.h ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5Ssimp.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5detect.c ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tstab.c Fixed comparisons between signed and unsigned values. Fixed warnings about unused function arguments.
* [svn-r305] Changes since 19980304Robb Matzke1998-03-051-18/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST New files ./html/extern1.gif [NEW] ./html/extern1.obj [NEW] ./html/extern2.gif [NEW] ./html/extern2.obj [NEW] ./html/Datasets.html Documented external raw data storage. ./html/Datasets.html ./html/chunk1.gif [NEW] ./html/chunk1.obj [NEW] Added a picture and better description for chunking since it seems that people are thinking chunks are fixed-size at the file level instead of at the array level. ./src/H5D.c ./src/H5Dpublic.h ./test/external.c Changed H5Dget_create_parms() to H5Dget_create_plist(). ./src/H5D.c ./src/H5Farray.c ./src/H5Fprivate.h ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./test/external.c ./test/istore.c External raw data file I/O for contiguous storage is now working. The library supports segments of various sizes which can be scattered throughout multiple files in any order. ./test/Makefile.in Remove more temporary files.
* [svn-r303] Changes since 19980228Robb Matzke1998-03-041-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Dataspaces.html ./html/Errors.html ./html/Files.html ./html/H5.api.html ./html/review1.html ./src/H5private.h ./src/H5public.h ./test/dsets.c ./test/dtypes.c Removed all the types like `int32' and `intn' into private headers since they violate the naming scheme and pollute application name space. Besides, our test files only use them in a handful of places and it's probably useless to export them to the app. The app is always written in terms of standard numeric types or its own numeric types and probably never in terms of HDF5 numeric types. If it were, then the user would have to copy from their type to hdf5 type for almost every hdf5 API function call! Same goes for return values. I also removed SUCCEED/FAIL from the API since apps should be checking against zero anyway. if (FAIL==(space=H5Screate_simple(...))) /*wrong*/ if ((space=H5Fcreate_simple(...)<0)) /*right*/ ./src/H5.c Changed arguments of H5version() from `uintn' to `unsigned'. ./src/H5Tpublic.h ./src/H5T.c Changed return type of H5Tget_nmembers() from `intn' to `int' ./src/H5A.c ./src/H5Aprivate.h ./src/H5Apublic.h Changed `H5Asearch_func_t' to `H5A_search_func_t' and moved its definition from the public to the private header file. ./html/H5.format.html Documented changes made to the external file list (H5O_EFL) message. ./src/H5D.c ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h Added partial support for external raw data files. HDF5 can now describe external raw data files by listing the file names, offsets, and size for a dataset. However, we will restrict a dataset to be stored "contiguously" when the external file list is viewed as a single address space. The current implementation is unable to read/write to external files--that will come later this week as will documentation. For now, take a look at ./test/external.c, particularly the calls to H5Pset_external(). ./test/Makefile.in ./test/external.c [NEW] ./MANIFEST Added tests for external storage. Note: the read test is supposed to fail at this point since reading external datasets is not implemented yet. There is no write test. ./src/H5S.c ./src/H5Sprivate.h ./src/H5Ssimp.c Added H5S_get_npoints_max() to return the maximum possible number of data points in a data space. Added an extra argument to H5S_get_dims() which returns the maximum dims. ./src/H5F.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5M.c [DEPRICATED] ./src/H5Mpublic.h [DEPRICATED] Changed `template' to `property list' in lots of places. ./src/H5Osdspace.c Removed an extra `\n' from a print statement. ./src/H5S_public.h Changed H5S_UNLIMITED to the maximum size_t value. ./test/extend.c "Extendable" is spelled "extendible". ./src/H5Farray.c ./src/H5V.c ./src/H5Vprivate.h ./test/hyperslab.c Strides are now type ssize_t instead of int. These have nothing to do with the sample granularity arguments for hyperslabs, which are also called "strides" in the code. ./test/tstab.c Changed assumptions about default address and length sizes.
generated by cgit v0.12 at 2024-11-03 13:56:11 (GMT)