summaryrefslogtreecommitdiffstats
path: root/src/H5Gnode.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r5471] Purpose:Quincey Koziol2002-05-291-13/+13
| | | | | | | | | | | | | | | | Code cleanup Description: Broke the FUNC_ENTER macro into several macros, with more specialized uses (which followup mail will describe). This was designed to move most/all of the checks which could be done at compile time to that point, instead of needlessly performing them (over & over :-) at run-time. This reduces the library's size (and thus staticly linked binaries) and has a minor speedup effect also. Platforms tested: IRIX64 6.5 (modi4) with parallel & FORTRAN enabled, and additional testing on FreeBSD and Solaris immediately after the checkin.
* [svn-r5467] Purpose:Quincey Koziol2002-05-281-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | Code cleanup. Description: Took Robb's recent ideas for improving the FUNC_ENTER/FUNC_LEAVE macros equivalents in the SAF library and adapted them to our library. I added an additional macro which is equivalent to FUNC_ENTER: FUNC_ENTER_NOINIT - Has the API tracing code, etc. from FUNC_ENTER but none of the library or interface initialization code. This is to be used _only_ for static functions and those which explicitly cannot have the library or interface initialization code enabled (like the API termination routines, etc.). This allowed many more of the functions in the library [but not all yet :-(] to be wrapped with FUNC_ENTER[_NOINIT]/FUNC_LEAVE pairs. It also reduced the size of the library and executables (by cutting out a bunch of code which was never executed), I'll e-mail the exact results when I've finished editing it. Platforms tested: IRIX64 6.5 (modi4)
* [svn-r5390] Purpose:Quincey Koziol2002-05-101-6/+0
| | | | | | | | | | | | | | | | | | | | | | Code cleanup Description: The parallel I/O file driver is optimized to only write metadata with one process (and broadcast the results to the other processes). This is currently enabled by a separate call to H5FD_mpio_tas_allsame() before each metadata write to the file. This can easily lead to problems where the prelude function call is omitted before the actual write code or, in a threaded environment, lead to race condititions where the value set is reset before being used. Solution: Since we only want to write metadata from one process, key off of the 'type' parameter (which has information about whether the data being written it metadata or raw data) to H5FD_mpio_write() as the method for determining whether to only write from one process or not. Platforms tested: IRIX64 6.5 (modi4)
* [svn-r5230] Purpose:Quincey Koziol2002-04-231-5/+4
| | | | | | | | | | | | | | | | | Code cleanup Description: Clean up the H5B_iterate code to not have a single hard-wired iterator for each interface which uses a B-tree, instead accept a function pointer which determines the callback function. This allows additional iterator callbacks to be defined without requiring additional H5B functions to be created. In that spirit, remove the H5B_prune_by_extent call and convert the H5F_istore callback routine for it into a callback routine for H5B_iterate. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5219] Purpose:Quincey Koziol2002-04-221-3/+3
| | | | | | | | | | Code cleanup Description: Clean up warnings from gcc 3.1 Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5200] Purpose:Quincey Koziol2002-04-181-0/+1
| | | | | | | | | | Code Cleanup Description: Clean up compiler warnings from the last bunch of checkins Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r4620] Purpose:Quincey Koziol2001-11-201-3/+6
| | | | | | | | | Code cleanup Description: Get rid of IDs from internal function calls and some small cleanups from the old-stype => generic property list conversion. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4548] Purpose:Quincey Koziol2001-10-161-4/+28
| | | | | | | | | | | Code cleanup. Description: Fix a few compiler warnings from the file creation property list -> generic property list conversion. Also change a hard-wired value (8) for the number of B-tree key values to a value that uses the enum's generated by the compiler. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4543] Raymond Lu2001-10-151-15/+27
| | | | | | | Purpose: Changed the file creation property list to the new generic property list. Platform tested: IRIX64, SunOS5.7, FreeBSD
* [svn-r4473] Purpose:Quincey Koziol2001-09-251-5/+5
| | | | | | | | | | | | | | | | | | | | | Code cleanup for better compatibility with C++ compilers Description: C++ compilers are choking on our C code, for various reasons: we used our UNUSED macro incorrectly when referring to pointer types we used various C++ keywords as variables, etc. we incremented enum's with the ++ operator. Solution: Changed variables, etc.to avoid C++ keywords (new, class, typename, typeid, template) Fixed usage of UNUSED macro from this: char UNUSED *c to this: char * UNUSED c Switched the enums from x++ to x=x+1 Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4355] Purpose:Quincey Koziol2001-08-141-16/+16
| | | | | | | | | | | | | | | | | | | | | | Code cleanup (sorta) Description: When the first versions of the HDF5 library were designed, I remembered vividly the difficulties of porting code from a 32-bit platform to a 16-bit platform and asked that people use intn & uintn instead of int & unsigned int, respectively. However, in hindsight, this was overkill and unnecessary since we weren't going to be porting the HDF5 library to 16-bit architectures. Currently, the extra uintn & intn typedefs are causing problems for users who'd like to include both the HDF5 and HDF4 header files in one source module (like Kent's h4toh5 library). Solution: Changed the uintn & intn's to unsigned and int's respectively. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4324] Purpose:Quincey Koziol2001-08-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | New Features! Description: Start migrating the internal use of property lists in the library from the older implementation to the new generic property lists. Currently, only the dataset transfer property lists are migrated to the new architecture, all the rest of the property list types are still using the older architecture. Also, the backward compatibility features are not implemented yet, so applications which use dataset transfer properties may need to make the following changes: H5Pcreate(H5P_DATASET_XFER) -> H5Pcreate_list(H5P_DATASET_XFER_NEW) and H5Pclose(<a dataset transfer property list>) -> H5Pclose_list(id) This still may have some bugs in it, especially with Fortran, but I should be wrapping up those later today. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4181] Purpose:Quincey Koziol2001-07-101-2/+2
| | | | | | | | | Bug Fix, Code Cleanup, Code Optimization, etc. Description: Fold in the hyperslab speedups, clean up compile warnings and change a few things from using 'unsigned' or 'hsize_t' to use 'size_t' instead. Platforms tested: FreeBSD 4.3 (hawkwind), Solaris 2.7 (arabica), Irix64 6.5 (modi4)
* [svn-r4038] Purpose:Quincey Koziol2001-06-211-3/+3
| | | | | | | | | | | | | Code clean/bug fix Description: H5FL (free-list manager) code currently is taking an hsize_t as the size of a memory block to allocate. On many machines, the size of an hsize_t is greater than the size of a size_t, potentially leading to incorrect memory allocations in rare circumstances. Solution: Changed hsize_t parameters and variables to size_t. Platforms tested: FreeBSD 4.3 (hawkwind)
* [svn-r3781] Purpose:Bill Wendling2001-04-051-16/+16
| | | | | | | | | | | | | | | | | | Update Description: Changed #include <hdf_file.h> construct to #include "hdf_file.h" so that the GNU compiler can more easily pick up the dependencies which it places in the .depend and Dependencies files. Also regenerated the Dependencies to go along with this. Platforms tested: Linux
* [svn-r3252] Purpose:Quincey Koziol2001-01-091-6/+6
| | | | | | | | | | | | | Code cleanup. Description: Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the extra warnings. Including a few show-stoppers for compression on IRIX machines. Solution: Changed lots of variables' types to more sensible and consistent types, more range-checking, more variable typecasts, etc. Platforms tested: FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
* [svn-r3209] Purpose:Quincey Koziol2000-12-281-0/+2
| | | | | | | | | | | | | Updating debugging information for new features, etc. Description: Lots of the new features added to the library during the last year or so have been added without updating the debugging routines used by h5debug. Solution: Added more of the new features (although not all of them) to the debugging routines for h5debug. Also included some more information to expand on the information printed from h5debug. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2722] Purpose:Quincey Koziol2000-10-241-1/+1
| | | | | | | | | | Feature symmetry Description: A while ago I needed to get the 'type' of data being accessed during writes to the VFL driver, so I put in code to get the information down there. Albert asked for the same information during reads, so I've added that in. Tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2652] Purpose:Quincey Koziol2000-10-101-3/+4
| | | | | | | | | | | | | | | Maintainance & performance enhancements Description: Re-arranged header files to protect private symbols better. Changed optimized regular hyperslab I/O to compute the offsets more efficiently from previous method of using matrix operations. Added sequential I/O operations at a more abstract level (at the same level as H5F_arr_read/write), to support the optimized hyperslab I/O. Platforms tested: Solaris 2.6 (baldric) & FreeBSD 4.1.1 (hawkwind)
* [svn-r2491] Added type of data parameter to H5F_block_write calls.Quincey Koziol2000-08-311-1/+1
|
* [svn-r2318] Rearranged metadata caching to put caching information in the ↵Quincey Koziol2000-06-011-1/+2
| | | | | | | | objects being cached instead of in separate structures. This reduces the amount of memory the hash table uses by about half. This is the initial step along the path of speeding up the metadata caching.
* [svn-r2081] Fixed a problem in H5Giterate which was not updating the 'index' ↵Quincey Koziol2000-04-051-23/+29
| | | | | | paramater for certain return values from the callback.
* [svn-r2073] Added free-list code to the library and took out the older ↵Quincey Koziol2000-04-041-42/+55
| | | | | | | "temporary buffer" code, since the functionality was superceded. See the followup document for details on the free-list code.
* [svn-r2057] Purpose:Albert Cheng2000-03-241-1/+2
| | | | | | | | | | | | | | Bug fix for parallel mode. Description: H5FD_mpio_tas_allsame was called for all cases, even when MPIO is not used for access. That corrupted the internal file handle structure. Solution: Define a macro, IS_H5FD_MPIO(f), for testing if f is opened with MPIO access. Will call H5FD_mpio_tas_allsame only if this condition is true. Platform tested: O2K, both -64 and -n32 modes.
* [svn-r1881] Changed all the HAVE_PARALLEL and HAVE_GASS macros to the newAlbert Cheng1999-12-171-2/+2
| | | | form of H5_HAVE_PARALLEL and H5_HAVE_GASS.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1548] Changes since 19990727Robb Matzke1999-07-281-65/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c [1.3] ./src/H5AC.c [1.3] ./src/H5ACprivate.h [1.3] ./src/H5B.c [1.3] ./src/H5Bprivate.h [1.3] ./src/H5D.c [1.3] ./src/H5F.c [1.3] ./src/H5Farray.c [1.3] ./src/H5Fcore.c [1.3] ./src/H5Ffamily.c [1.3] ./src/H5Fistore.c [1.3] ./src/H5Flow.c [1.3] ./src/H5Fmpio.c [1.3] ./src/H5Fprivate.h [1.3] ./src/H5Fsec2.c [1.3] ./src/H5Fsplit.c [1.3] ./src/H5Fstdio.c [1.3] ./src/H5G.c [1.3] ./src/H5Gent.c [1.3] ./src/H5Gnode.c [1.3] ./src/H5Gprivate.h [1.3] ./src/H5Gstab.c [1.3] ./src/H5HG.c [1.3] ./src/H5HGprivate.h [1.3] ./src/H5HL.c [1.3] ./src/H5HLprivate.h [1.3] ./src/H5MF.c [1.3] ./src/H5MFprivate.h [1.3] ./src/H5O.c [1.3] ./src/H5Oattr.c [1.3] ./src/H5Ocont.c [1.3] ./src/H5Odtype.c [1.3] ./src/H5Oefl.c [1.3] ./src/H5Olayout.c [1.3] ./src/H5Oprivate.h [1.3] ./src/H5Oshared.c [1.3] ./src/H5Ostab.c [1.3] ./src/H5P.c [1.3] ./src/H5R.c [1.3] ./src/H5Smpio.c [1.3] ./src/H5T.c [1.3] ./src/H5Tvlen.c [1.3] ./src/H5private.h [1.3] ./test/dtypes.c [1.3] ./test/gheap.c [1.3] ./test/istore.c [1.3] ./test/lheap.c [1.3] ./test/ohdr.c [1.3] ./tools/h5debug.c [1.3] File addresses (the `haddr_t' type) are passed by value instead of by reference. The type is no longer a struct. This is one of the preliminary changes needed for the Virtual File Layer stuff. ./src/H5Fprivate.h [1.3] ./src/H5Flow.c [1.3] Some address functions were rewritten as macros.
* [svn-r1216] Changes since 19990423Robb Matzke1999-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c Changed H5F_block_read/write() to take a file transfer property list instead of just a parallel I/O mode. This will allow us to pass additional parameters to the I/O functions without having so many arguments to worry about. This fixes a bug I introduced last Friday for parallel HDF5 ./src/H5B.c Fixed decoding of B-tree keys when iterating through the leaves of the B-tree. This fixes a bug for applications that are adding new entries to groups and also listing the groups.
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-231-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1184] Changes since 19990402Robb Matzke1999-04-151-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in Fixed so private libraries are not installed publicly. The installation directories `bin', `include', and `lib' are created mode 755. ./src/H5.c ./src/H5A.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Vprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h ./test/chunk.c ./test/dsets.c ./test/dtypes.c ./test/h5test.c ./test/overhead.c ./test/ragged.c ./test/tattr.c ./tools/h5dump.c ./tools/h5findshd.c ./tools/h5ls.c Changed `__unused__' to `UNUSED' to fix a conflict with GNU header files. ./src/H5Tpkg.h ./test/h5test.h Removed __unused__ from forward function declarations. ./src/H5P.c Removed a comment about restrictions for the type conversion temporary buffers. Thanks to Quincey, the comment no longer applied. ./src/H5T.c Relaxed the H5Tpack() a little so it would pack compound data structures that had non-transient atomic members. ./tools/h5ls.c Added a `-g' (or `--group') flag that causes information to be printed about the specified group instead of the group's contents. (sort of like Unix's `ls -d'). The `-g' can be used in combination with `-r' to print information about the group and its contents.
* [svn-r936] Changes since 19981119Robb Matzke1998-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r859] Changes since 19981030Robb Matzke1998-11-021-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added new Pablo files HDF5record_RT.h and ProcIDs.h ./acconfig.h ./configure [REGENERATED] ./configure.in ./src/H5.c ./src/H5Vprivate.h ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5public.h ./test/big.c Added more configuration stuff for the Win32 environment. Removed all the #ifdef WIN32 from the source and replaced them with OS-independent stuff. Specifics follow: Check for non-Posix.1 `st_blocks' field in `struct stat' which is used by the big file test to decide if the file system supports holes. If the st_blocks field isn't present then we just skip the test. Configure checks for <io.h> <sys/resource.h> <sys/time.h> and <winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H, HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found. Configure checks whether both <sys/time.h> and <time.h> can be included and defines SYS_TIME_WITH_TIME if so. Otherwise include only <sys/time.h> or <time.h> even if both exist. Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the result or to zero if __int64 isn't defined. The source uses `long long' in preference to `__int64'. Removed null WIN32 definition for `inline' since such a definition already exists in H5config.h Protected gettimeofday() calls in debugging code with HAVE_GETTIMEOFDAY instead of WIN32. ./src/H5F.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.h ./src/H5P.c ./src/H5Tconv.c ./src/H5private.h Removed #include of system files from library source files and consolodated them into H5private.h where they're protected by various configuration macros (most of them were duplicated there already anyway). ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/overhead.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Protected system #include's with #ifdef's from H5config.h. Undefined NDEBUG since some of the tests rely on assert() to check return values. Removed WIN32 definitions for __unused__ since this can be controlled by the definition of HAVE_ATTRIBUTE in H5config.h ./test/testhdf5.h Removed the CLEAN_CMD definition because we no longer use it. Albert's cleanup() functions replaced it. ./test/fillval.c Initialized auto hid_t variables to fix warnings in error recovery code when data flow analysis is turned on in compilers. ./test/h5tools.c Initialized an auto variable to fix a compiler warning. ./test/chunk.c ./test/ragged.c The WIN32 had some unsigned variables changed to signed because the compiler generates warnings when coercing unsigned to double(?). I changed them back to unsigned because they really are unsigned quantities. If this the change was just to shut up extraneous warnings then perhaps a compiler flag can do the same; otherwise if the compiler generates bad code then we should supply a patch file instead messing up source code with bug work-arounds. ./src/H5detect.c Protected system #include's with #ifdef's from H5config.h thereby removing a WIN32. If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that `struct passwd' doesn't exist either (we don't really need it in that case). The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of `long long' or else `__int64' or else `long' depending on what's available. ./src/H5Flow.c ./src/H5Ofill.c Added __unused__ to some function arguments that aren't used when assertions are turned off. ./src/H5V.c Changed an auto variable name in some hand-inlined code to get rid of a warning about the variable shadowing a previous auto.
* [svn-r797] Changed comments from returning "SUCCEED/FAIL" to ↵Quincey Koziol1998-10-261-19/+9
| | | | | | "non-negative/negative" and also fixed a few more explicit checks against FAIL.
* [svn-r770] H5B.c:Albert Cheng1998-10-211-3/+3
| | | | | | | | | | | | | | | | | | Replaced FAIL with H5B_INS_ERROR in routine H5B_remove_helper. Updated code that calls H5B_remove_helper with the proper code. H5Fmpio.c: Removed a typo. H5Gnode.c: Replaced FAIL with H5B_INS_ERROR in routine H5G_node_remove. H5Odtype.c: Put in proper casting to remove compiler warnings. H5S.c: Replaced FAIL with H5S_NO_CLASS in routine H5Sget_simple_extent_type. H5Sselect.c: Fixed couple typos to remove compiler warnings. Platform tested: O2K.
* [svn-r726] Changes since 19980924Robb Matzke1998-09-281-7/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gprivate.h ./test/Makefile.in ./test/unlink.c [NEW] Finished H5Gunlink() and H5Grename(). ./src/H5F.c ./src/H5Fistore.c ./src/H5Fprivate.h Removed the last memcpy() from the chunk cache. ./src/H5Fistore.c The offset of a chunk within a dataset is an 8-byte quantity per dimension instead of 4 bytes. ./src/H5HL.c Fixed infinite loops in H5HL_remove().
* [svn-r714] Changes since 19980911Robb Matzke1998-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This checkin is to fix a couple bugs for Jim Reus. Some features are not fully implemented but it shouldn't break anything. ./config/conclude.in ./test/Makefile.in `make clean' removes object files from the test directory as well as a couple more *.h5 temp files. ./config/hpux9.03 [NEW] New config file for HP/UX 9.03 ./src/H5B.c ./src/H5Bprivate.h ./src/H5Fistore.c ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gstab.c Not-yet-complete version of object removal. ./src/H5Fistore.c ./src/H5Fprivate.h Experimental optimizations, disabled by default. ./src/H5Fprivate.h Default low-level driver was changed to H5F_LOW_SEC instead of H5F_LOW_STDIO because the sec2 driver is much easier to debug. ./src/H5Fsplit.c ./src/H5G.c ./src/H5Z.c Changed a couple return statements to HRETURN. ./src/H5Odtype.c Removed a check for nested compound data types from back when they weren't implemented that raised an error. ./tools/h5tools.c Increased temp buffer sizes and added a check for buffer overflow so we fail an assertion (hopefully). This really needs to be fixed sometime. Added support for printing H5T_STRING data types.
* [svn-r673] Changes since 19980908Robb Matzke1998-09-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./COPYING Reformatted as text instead of C. Removed zlib crew from the list of contributors since no zlib code is actually in the hdf5 library. ./INSTALL ./INSTALL.ascired ./MANIFEST Minor updates for Beta release including version number change. ./INSTALL_MAINT Added information about making a release. ./RELEASE Updated function list based on public header files. ./bin/checkposix Got rid of complaints about some obvious things. ./doc/html/H5.api.html ./doc/html/RM_H5F.html ./src/H5F.c ./src/H5Fpublic.h ./test/tfile.c Changed H5Fget_create_template() and H5Fget_access_template() to H5Fget_create_plist() and H5Fget_access_plist() since that conforms better to lots of other names. ./doc/html/Datatypes.html ./doc/html/ExternalFiles.html ./doc/html/Files.html ./doc/html/H5.api.html ./doc/html/H5.sample_code.html ./doc/html/RM_H5F.html ./doc/html/RM_H5Front.html Changed `template' to `property list', etc. ./doc/html/Ragged.html [NEW] Documentation for ragged arrays. ./src/H5Iprivate.h ./src/H5Ipublic.h ./src/H5I.c Changed the scope of some symbols to be more local. ./src/H5.c ./src/H5AC.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5I.c ./src/H5O.c ./src/H5Ocomp.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5P.c ./src/H5S.c ./src/H5Shyper.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5private.h Fixed some violations of our naming scheme by adding HD to the beginning of all Posix functions.
* [svn-r650] Eliminated H5Fmpioprivate.h, moved contents to H5Fprivate.h.Robert Kim Yates1998-09-011-1/+1
|
* [svn-r637] Added include H5Fmpioprivate.hRobert Kim Yates1998-08-311-0/+1
|
* [svn-r630] Added code to eliminate redundant writes of metadata,Robert Kim Yates1998-08-281-0/+4
| | | | | | so only proc 0 writes it to disk. The elimination is activated only when the environment variable HDF5_MPI_1_METAWRITE is nonzero; otherwise all processes that opened the file will write the metadata to disk.
* [svn-r435] ./INSTALLRobb Matzke1998-06-231-9/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./INSTALL_MAINT ./README ./RELEASE Partially updated for second alpha, but haven't updated version numbers yet. ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5T.c ./src/H5Tconv.c ./src/H5detect.c ./test/hyperslab.c ./test/istore.c Changed memory allocation functions so they fail instead of dumping core. The `x' was removed from the name to remind us of that: H5MM_xmalloc() -> H5MM_malloc(), etc. H5MM_calloc() takes one argument like H5MM_malloc() instead of two like calloc() because we almost always called it with `1' for one of the arguments anyway. The only difference between the two functions is that H5MM_calloc() returns memory which is initialized to zero. ./src/H5Gent.c ./src/H5Gprivate.h Removed H5G_ent_calloc() since it wasn't used. ./src/H5Fistore.c Fixed a bug found by Albert. Thanks, Albert! This fix combined with the changes to memory allocation prevent the library from failing an assertion if the application uses an unreasonable size for chunks (like Alberts 10000x10000x4). ./src/H5MF.c ./src/H5MFprivate.h Changed H5MF_free() to H5MF_xfree() since calling it with an undefined address is allowed.
* [svn-r411] Added data-transfer-mode to various function to specify whichAlbert Cheng1998-06-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mode to use for data transfer. Currently, INDEPENDENT transfer is the default mode. Collective is supported for files opened via the MPIO driver. Specific changes to individual files follow. H5D.c: Replaced previous kludge of passing xfer_mode via the file access_mode with xfer_mode function parameter all the way to the low level I/O drivers. H5Dprivate.h: The H5D_xfer_t.xfer_mode is now used in serial and parallel modes. Removed the "HAVE_PARALLEL" macro condition to support it. H5Dpublic.h: Added H5D_XFER_DFLT as a new value for H5D_transfer_t and removed the HAVE_PARALLEL condition macro to make the H5D_transfer_t definition available to both serial and parallel version. H5B.c: H5F.c: H5Farray.c: H5Fcore.c: H5Ffamily.c: H5Fistore.c: H5Flow.c: H5Fmpio.c: H5Fsec2.c: H5Fsplit.c: H5Fstdio.c: H5Gnode.c: H5HG.c: H5HL.c: H5O.c: H5Sprivate.h: H5Ssimp.c: debug.c: Added xfer_mode to the argument lists of the following routines to specify data transfer mode. Then updated calls to these routines with appropriate transfer mode. Whenever cases that collective mode is inappropriate (e.g. object header read-write, flush), H5D_XFER_DFLT is used. The H5D_XFER_DFLT mode is currently acting the same as the independent mode. H5F_block_read H5F_block_write H5F_arr_read H5F_arr_write H5F_core_read H5F_core_write H5F_fam_read H5F_fam_write H5F_mpio_read H5F_mpio_write H5F_low_write H5F_low_read H5F_sec2_read H5F_sec2_write H5F_split_read H5F_split_write H5F_stdio_read H5F_stdio_write H5S_simp_fgath H5S_simp_fscat H5S_simp_read H5S_simp_write H5Fprivate.h: H5P.c: Removed access_mode field from struct H5F_access_t type. The access-mode was the initial design to control independent or collective I/O mode. It is now supported by the data transfer mode.
* [svn-r353] Changes since 19980414Robb Matzke1998-04-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Compression.html [NEW] ./html/Datasets.html ./html/H5.format.html ./html/H5.user.html Documented compression. A couple of the H5P functions aren't quite implemented yet but they're coming soon... ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocomp.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c [NEW] ./src/H5Zprivate.h [NEW] ./src/H5Zpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/dsets.c ./test/istore.c Compression is now mostly working. Don't try to open a compressed dataset though because the compression message won't be read. ./html/Datatypes.html ./html/H5.api.html ./src/H5.c ./src/H5private.h ./src/H5D.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added timing support. When compiled with H5T_DEBUG defined the library will print conversion bandwidths when the library closes. The H5Tregister functions take a string as the first argument so the statistics output is meaningful. ./MANIFEST Added new files. ./configure.in ./src/H5config.h.in Check for getrusage(). Check for compress2() in libz.a and the zlib.h header file. Added `z' to the debug list. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c ./src/debug.c Cleaned up some indentation and added support to print istore B-trees. From the debugger, give the B-tree address and the dimensionality from the layout message of the object header. ./src/h5ls.c The oid is printed as w:x:y:z where w and x are the file ID and y and z are the OID within the file. You can give z or y*2^32+z as an argument to the debugger to print the object header for the object. ./src/H5AC.c Cleaned up statistics and made them match those reported by H5T and H5Z. ./src/H5MM.c ./src/H5MMprivate.h ./src/H5Fistore.c Finally got rid of a couple of long-standing const cast warnings.
* [svn-r346] Changes since 19980410Robb Matzke1998-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/H5.format.html ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/h5ls.c ./test/Makefile.in Symbolic links are now supported. The ./test/links program will create a `links.h5' file that demonstrates hard links, soft links, dangling links, and recursive links. A symbolic link is a symbol table entity and doesn't have an object header. It's format is described in H5.format.hml. ./src/H5G.c ./src/H5Gpublic.h ./src/h5ls.c Implemented H5Gstat() and H5Gget_linkval() as documented by Quincey. The `H5G_type_t type' field of `H5G_stat_t' was changed to `int type' because H5G_type_t was already used and the `type' data type should be open-ended. ./src/H5Ffamily.c Removed an incorrect diagnostic message. ./test/big.c Added read/write calls to test partial I/O to big contiguous datasets. With no arguments it writes to a dataset and prints the list of points written which should be redirected to a file. With an argument (the name of a file containing the stdout of a run with no arguments) values are read from the dataset. One would typically say `big >x && big x'.
* [svn-r338] Changes since 19980407Robb Matzke1998-04-081-26/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5S.c ./src/H5Sprivate.h ./src/H5Spublic.h ./src/H5Ssimp.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5private.h ./src/H5public.h ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tfile.c ./test/th5s.c Anything having to do with the size of a dataset now uses the types `hsize_t' and `hssize_t' which must be the same size and at least as large as `size_t'. This isn't fully tested yet, so hsize_t and hssize_t are defined as size_t and ssize_t in H5public.h. Setting them to larger values will trip up gcc versions less than 2.8.1 on x86 platforms. Documented unused function formals with `__unused__' before the formal name. This also has the effect of supressing warning messages for gcc since it's defined to be `__attribute__((unused))' in the H5private.h file. ./src/debug.c ./src/h5ls.c If the file name contains a `%' then the file is opened as a file family with H5P_DEFAULT for the file member access property list. ./src/h5ls.c The group name is optional, defaulting to `/'. ./src/hdf5.h Added some missing public header files.
* [svn-r337] Changes since 19980403Robb Matzke1998-04-071-13/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in Moved setting of compiler warning switches earlier in the file. Turned on more warning switches to gcc. ./config/linux Prints a warning if the gcc version is less than 2.8.1 since that version has problems with register allocation for `long long'. ./html/Datatypes.html Documented sharing of data types between datasets. ./src/H5G.c ./src/H5Gpublic.h Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard links. Still have soft links to do. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5D.c ./src/H5E.c ./src/H5Eprivate.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5HLprivate.h ./src/H5I.c ./src/H5Iprivate.h ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5Ssimp.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5detect.c ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tstab.c Fixed comparisons between signed and unsigned values. Fixed warnings about unused function arguments.
* [svn-r333] Changes since 19980324Robb Matzke1998-03-301-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5HG.c [new] ./src/H5HGprivate.h [new] ./src/H5HGpublic.h [new] ./src/Makefile.in Added global heaps, H5HG. This compiles but is untested. ./src/H5D.c ./src/H5G.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HL.c [renamed from H5H.c] ./src/H5HLprivate.h [renamed from H5Hprivate.h] ./src/H5HLpublic.h [renamed from H5Hpublic.h] ./src/H5Oefl.c ./src/Makefile.in ./src/hdf5.h ./test/theap.c Renamed local heaps from H5H to H5HL. ./src/H5AC.c ./src/H5ACprivate.h ./src/debug.c Added debugging support for global heap collections. ./html/H5.format.html Ripped out the old small object heap documentation and added documentation for the new global heap. ./html/H5.api.html ./src/H5P.c ./src/H5Ppublic.h ./src/H5F.c ./src/H5Fprivate.h ./src/H5private.h The H5Pget_version() function no longer returns a small object heap version number. Instead, each collection of the global heap has its own version number instead of a single number in the file boot block. ./bin/release Omit files marked for removal by CVS even though the removal hasn't been committed yet. ./test/iopipe.c Removed warnings about casting unsigned int to double on Irix64. ./MANIFEST Removed ./test/testpar/phdf5sup.c
* [svn-r328] Changes since 19980318Robb Matzke1998-03-241-114/+119
| | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gpublic.h ./src/H5Gstab.c Implemented H5Giterate(). However, since most functions can't take a group ID in place of a file ID yet, there's not a whole lot that the operator can do besides print the name or something. ./test/H5O.c Fixed writing of four uninitialized bytes to the file as part of an object header. ./test/istore.c For some reason, `mpirun -np 1 istore' results in extra arguments on the command line that istore doesn't understand. I'm probably forgetting to call some MPI function in main(). Albert, Kim? So I commented out the `exit(1)' for the time being.
* [svn-r302] Changes since 19980227Robb Matzke1998-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Errors.html [NEW] ./html/H5.user.html ./MANIFEST Documents the new error handling interface and gives examples. ./src/H5.c ./src/H5private.h ./src/H5Apublic.h ./src/H5E.c ./src/H5Eprivate.h ./src/H5Epublic.h Rewrote error handling. Got rid of `push' overloading and added a few API functions. The error stack is statically allocated and not entered into H5A, simplifying error handling within the error handler. Rudimentary support for threads. Changed the names of some errors. ./src/H5G.c ./src/H5Gnode.c ./src/H5H.c ./src/H5O.c ./src/H5T.c Changed H5ECLEAR to H5E_clear(). ./src/Makefile.in Alphabetized source list. ./test/dsets.c Turned off error reporting around functions that are expected to fail. Error messages are sent to stdout. ./test/testhdf5.c ./test/testhdf5.h Turned off automatic error reporting since this file mostly calls internal functions and does its own error reporting.
generated by cgit v0.12 at 2024-11-08 09:27:19 (GMT)