summaryrefslogtreecommitdiffstats
path: root/src/H5Shyper.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r3479] Purpose:Quincey Koziol2001-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Bug Fixes Description: Fixed a bug in H5Shyper.c where 'contiguous' hyperslabs (i.e. ones which took up an entire dataset) were not being detected correctly and would instead be read a part at a time instead of all at once. Also fixed a bug in the handling of hyperslabs for chunked datasets where hyperslabs from chunks which weren't aligned on exact dimension bounaries were not reading/writing data correctly. Solution: H5Shyper.c was a single line change from a 'block' size to a 'count' size. H5Fseq.c changes we much more significant and involved detecting when non-chunk aligned sequences of data were being written and constructing hyperslab blocks to pass down to the chunking I/O routine (which only understand hyperslab I/O requests, not element sequence requests). This was complicated by the need to align the hyperslabs requested on dimension boundaries... Platforms tested: FreeBSD 4.2. (hawkwind)
* [svn-r3302] Purpose:Quincey Koziol2001-01-181-65/+102
| | | | | | | | | | | | | Bug fix Description: Certain combinations of hyperslabs, especially those that have to be strip-mined during I/O were causing data to be incorrectly transferred. Solution: Changed the code in H5S_get_hyper_regions to be more careful about the regions of the current dimension that are valid. Sometimes, regions which had already been iterated through were being re-processed. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r3252] Purpose:Quincey Koziol2001-01-091-358/+371
| | | | | | | | | | | | | Code cleanup. Description: Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the extra warnings. Including a few show-stoppers for compression on IRIX machines. Solution: Changed lots of variables' types to more sensible and consistent types, more range-checking, more variable typecasts, etc. Platforms tested: FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
* [svn-r3065] Purpose:Quincey Koziol2000-12-021-4/+4
| | | | | | | | Code cleanup Description: Remove some warnings... Platforms tested: FreeBSD 4.2 (hawkwind) & IRIX64 6.5 (modi4)
* [svn-r3061] Purpose:Quincey Koziol2000-12-011-10/+51
| | | | | | | | | | | | | | Bug fix. Description: Cray T3E (and J90?) was failing on partial I/O tests. The bug was in the optimized hyperslab routines for cases where a hyperslab filled the temporary datatype conversion buffer and the optimized hyperslab routine needed to start in the middle of a hyperslab. Solution: Corrected code to detect the situation and read in the correct amount of elements in the hyperslab. Platforms tested: Cray T3E (mcurie.nersc.gov)
* [svn-r2804] Purpose:Quincey Koziol2000-11-071-0/+4
| | | | | | | | | | | | Bug Fix Description: Selections in 1-D dataspaces would get into an infinite loop in H5S_hyper_select_iterate_mem_opt (called by H5Diterate and H5Dget_vlen_buf_size) due to some incorrect logic. Solution: Handled 1-D cases correctly and get out of loop. Platforms tested: Eyeballed...
* [svn-r2736] Purpose:Quincey Koziol2000-10-251-218/+274
| | | | | | | | | | Code optimization Description: Minor tweaks throughout the optimized regular hyperslab code to increase speed. This set of improvements increase the benchmark time from taking ~5.46 seconds to ~4.50 seconds, or around a 20% further speedup. Platforms tested: Solaris 2.6 (baldric)
* [svn-r2707] Purpose:Quincey Koziol2000-10-191-15/+91
| | | | | | | | | | | | | Optimization for parallel I/O Description: When contiugous hyperslabs are defined (i.e. with the block=stride), the library was only aggregating the hyperslabs together for the fastest changing dimension. Solution: Add some extra code to detect when contiguous hyperslabs span more than one row and output the entire contiguous section at once. Platforms tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2657] Quincey Koziol2000-10-101-274/+19
| | | | | | | | | | | | Purpose: Parallel Bug Fixes Description: Was out of sync with header file re-arrangements I checked in last night. Solution: Fixed to use new header files, etc. Platforms tested: O2K (modi4)
* [svn-r2652] Purpose:Quincey Koziol2000-10-101-50/+94
| | | | | | | | | | | | | | | Maintainance & performance enhancements Description: Re-arranged header files to protect private symbols better. Changed optimized regular hyperslab I/O to compute the offsets more efficiently from previous method of using matrix operations. Added sequential I/O operations at a more abstract level (at the same level as H5F_arr_read/write), to support the optimized hyperslab I/O. Platforms tested: Solaris 2.6 (baldric) & FreeBSD 4.1.1 (hawkwind)
* [svn-r2647] Purpose:Albert Cheng2000-10-101-15/+19
| | | | | | | | | | | | | | Bug fiX Description: H5S_hyper_select_valid would report hyperslab invalid if the one of the count values is zero. The verifying algorithm did not take into consideration that block or count can contain zeros to indicate no element is wanted. Solution: Added code to test if block or count is zero. If so, skip the rest of the validity check. Platforms tested: IRIX64 -64.
* [svn-r2610] Purpose:Quincey Koziol2000-09-281-28/+325
| | | | | | | | | | | | | | | | | | Code Optimization. Description: The optimized routines for copying regular hyperslabs in memory have been using the same matrix routines to copy their hyperslab pieces as the routines for irregularly shaped hyperslabs. This ends up imposing lots of extra overhead on the optimized routine, since it basically "knows" all the matrix information it needs. Solution: Keep track of the [small] amount of matrix information necessary to perform the regular hyperslab copies in the optimized routines themselves instead of using the matrix routines. This improves the performance for the benchmark I'm running from ~18 seconds to ~12 seconds and should apply to parallel I/O situations also. Platforms tested: Solaris 2.6 (i.e. baldric)
* [svn-r2594] Purpose:Quincey Koziol2000-09-261-24/+18
| | | | | | | | | | | | Small Code Cleanup Description: Code to optimize adjacent (i.e. contiguous) hyperslab was ugly and used too many temporary variables. Solution: Computed the optimized hyperslabs slightly differently and got rid of unnecessary temporary variables. Platforms tested: FreeBSD 4.1
* [svn-r2587] Purpose:Quincey Koziol2000-09-221-2/+56
| | | | | | | | | | | | | | | | | | | Bug fix (sorta) Description: When the stride and block size of a hyperslab selection are equal, the blocks that are selected are contiguous in the dataset. Prior to my hyperslab optimizations, this situation used to be detected and somewhat optimized to improve performance. I've added more code to optimize for this situation and integrated it with the new hyperslab optimization that weren't very efficient for that case as they should have been. Solution: Detect contiguous hyperslab selections (i.e. block size in a dimension is the same as the stride in that dimension) and store the optimized, contiguous version of that hyperslab. We also store the original, un- optimized version of the hyperslab to give back to the user if they query the hyperslab selection they just made. Platforms tested: FreeBSD 4.1
* [svn-r2581] Purpose:Quincey Koziol2000-09-191-33/+23
| | | | | | Clean up compiler warnings. Platforms tested: FreeBSD 4.1
* [svn-r2580] Purpose:Quincey Koziol2000-09-191-333/+1952
| | | | | | | | | | | | Restore file Description: It appears that Robb's checkin earlier today erroneously overwrote this file with an older version... *grumble* Solution: Found another copy of newest version, verified that it is operating correctly and re-checked it in. Platforms tested: FreeBSD 4.1
* [svn-r2579] Purpose:Quincey Koziol2000-09-191-3/+1
| | | | | | Clean up small compiler warnings and add missing function prototypes. Platforms tested: FreeBSD 4.1
* [svn-r2573] Purpose:Robb Matzke2000-09-191-1949/+332
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix Irix pmake bugs Description: Build fails on Irix when builddir != srcdir Solution: * acconfig.h * src/H5config.h.in [REGENERATED] Added definition for HAVE_STREAM * config/conclude.in * config/depend1.in * config/depend2.in * config/depend3.in * config/depend4.in The `Dependencies' file is located in the source tree. This fixes bugs for Irix pmake when compiling outside the source tree. Hopefully it still preserves Albert's changes which allow concurrent compilations to not stomp on each other's Dependencies files. * examples/Dependencies [REGENERATED] * src/Dependencies [REGENERATED] * test/Dependencies [REGENERATED] * tools/Dependencies [REGENERATED] Regenerated for testing purposes. Platforms: i686-pc-linux mips-sgi-irix6.5 sparc-sun-solaris2.6
* [svn-r2546] Further patches to accomodate regular hyperslabs. More of the ↵Quincey Koziol2000-09-131-50/+193
| | | | | | tests are passing, but not all of them yet...
* [svn-r2544] Optimized regular hyperslab I/O routines and data structures. ↵Quincey Koziol2000-09-131-293/+1767
| | | | | | | | | | | | | On my benchmarks, they are about 4-5 times faster than before. We no longer generate "general" hyperslab data structures for regular hyperslabs, the general data structures are only generated when needed for irregular hyperslabs. Still fixing a couple of nook-and-cranny functions to understand the new information for the regular hyperslabs, so the tests aren't completely passing, but I wanted to get this checked in for Elena's benchmarks. I should have more/all tests passing later today.
* [svn-r2510] Took memory allocation out of loop and used some temporary ↵Quincey Koziol2000-09-061-8/+21
| | | | | | | | variable instead of multi-dereferenced pointer chains. This buys us another ~20% improvement in the hyperslab I/O speed. (From ~30 seconds to ~25 seconds on the h5hypers benchmark)
* [svn-r2504] Revised routine to add hyperslabs to the selection, sorting the ↵Quincey Koziol2000-09-041-78/+36
| | | | | | | | arrays of hyperslab boundaries after adding them all, instead of maintaining the sorted order during each addition. This boosts performance for sub-sampled (i.e. strided) hyperslabs by about a factor of 10! :-)
* [svn-r2454] Took out another unneeded assertion which was causing problems.Quincey Koziol2000-08-011-1/+0
|
* [svn-r2450] Remove asserts on non-existent variables..Quincey Koziol2000-08-011-2/+1
|
* [svn-r2448] Re-did section of hyperslab initialization code to avoid tons of ↵Quincey Koziol2000-07-281-114/+111
| | | | | | realloc() calls. Speeds user's test code up by ~25 times... :-)
* [svn-r2110] Re-wrote a good chunk of the hyperslab code to work correctly in ↵Quincey Koziol2000-04-111-411/+301
| | | | | | | several situations which weren't tested before. Things should be both faster and easier to understand in this code now.
* [svn-r2098] Fixed error in iterating through hyperslabs in certain ↵Quincey Koziol2000-04-071-32/+146
| | | | | | situations where hyperslabs were staggered in the dataset.
* [svn-r2073] Added free-list code to the library and took out the older ↵Quincey Koziol2000-04-041-128/+438
| | | | | | | "temporary buffer" code, since the functionality was superceded. See the followup document for details on the free-list code.
* [svn-r1857] Fixed error in decoding hyperslab regions for dataset region ↵Quincey Koziol1999-12-071-1/+1
| | | | | | references. Data is ok in the file, just mixed up when trying to dereference the region.
* [svn-r1836] Mainly fixed a bug in VL datatype comparisons which was causing ↵Quincey Koziol1999-11-171-2/+2
| | | | | | | non-equal VL types to compare as equal. Added some asserts to make certain nothing slips through again. Also cleaned up a few warnings from the SGI compiler.
* [svn-r1695] Fixed various compiler warnings..Quincey Koziol1999-09-301-1/+1
|
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-36/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1566] Changed C++ "operator" keyword to "op"Quincey Koziol1999-08-101-5/+5
|
* [svn-r1506] Bug fixes to get VL datatype fields in compound datatypes ↵Quincey Koziol1999-07-171-0/+9
| | | | | | working. Also, some memory leaks plugged in other routines.
* [svn-r1385] Updated H5Rdereference, H5Rget_object_type and H5Rget_region ↵Quincey Koziol1999-06-251-4/+7
| | | | | | | | | | | to accept a location ID (i.e. a file or group ID) as well as the dataset ID. This should allow Dave to get the palettes stored in the file correctly and also enable Bob and/or Bruce's indexing stuff. This change should be folded into the documentation for these three functions for the release. Also, I fixed a number of bugs in the hyperslab and point selection iterators for H5Diterate and they are working correctly now.
* [svn-r1374] Added in code to support the H5Diterate function, which I've got ↵Quincey Koziol1999-06-241-287/+488
| | | | | | | to add tests for now. Also, I revised some of the code for hyperslab I/O, which should provide a modest speedup in situations with lots of hyperslabs.
* [svn-r1305] Checkpointing the VL datatype code. I believe the core ↵Quincey Koziol1999-06-041-4/+2
| | | | | | | | functionality is here, accessed with H5Tvlen_create, but I need to start writing tests now. Also the more esoteric API calls (such as H5Tget_vlen_buf_size and the memory management calls) aren't implemented yet.
* [svn-r1277] Added additional checks into the dataspace code to determine if ↵Albert Cheng1999-05-251-0/+55
| | | | | | | | | the hyperslabs being written out are contiguous in memory and on disk and write/read them as one I/O operation (if the datatypes don't require conversion). This should be a good performance boost for those situations. It's especially needed on the ASCI Red (TFlops) machine. - QAK (from Albert's account on modi4 :-)
* [svn-r1233] Removed some debugging printfs.Quincey Koziol1999-04-281-2/+0
|
* [svn-r1232] Fixed some boundary conditions on hyperslab I/O that the ↵Quincey Koziol1999-04-281-25/+28
| | | | | | parallel I/O T3E port exposed. These are more changes that everyone should pick up.
* [svn-r1217] Changes since 19990426Robb Matzke1999-04-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./examples/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Fixed some dependency problems in Makefiles. If the library version is updated then everything gets recompiled. ./src/H5G.c ./src/H5R.c Failure return value for object type functions is now H5G_UNKNOWN as documented. ./src/H5Shyper.c ./src/H5Spoint.c Fixed an unused argument warning. ./tools/h5debug.c Fixed a call to H5F_block_read() since the 4th argument is different now. ./tools/h5ls.c Added a space between the object name and class to make the output readable when the object name is longer than 24 characters. C
* [svn-r1210] Changed parameters for function calls which figure out the ↵Quincey Koziol1999-04-231-27/+25
| | | | | | | | | | | | | | | buffer size for H5Dread/H5Dwrite to use to allow the I/O calls to break up a user's buffer into pieces that are at least as large as the sequence of bytes being written in the fastest changing dimension. Also fixed a hard-to-find bug in the hyperslab I/O routines which could cause data to be corrupted when writing out fields to compound datatype data with background preservation turned on and hyperslabs which were large enough to require two I/O passes on a hyperslab block. A pretty obscure situation, but it would be worthwhile for users to upgrade to this code in order to be certain that correct data is being written.
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1184] Changes since 19990402Robb Matzke1999-04-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in Fixed so private libraries are not installed publicly. The installation directories `bin', `include', and `lib' are created mode 755. ./src/H5.c ./src/H5A.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Vprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h ./test/chunk.c ./test/dsets.c ./test/dtypes.c ./test/h5test.c ./test/overhead.c ./test/ragged.c ./test/tattr.c ./tools/h5dump.c ./tools/h5findshd.c ./tools/h5ls.c Changed `__unused__' to `UNUSED' to fix a conflict with GNU header files. ./src/H5Tpkg.h ./test/h5test.h Removed __unused__ from forward function declarations. ./src/H5P.c Removed a comment about restrictions for the type conversion temporary buffers. Thanks to Quincey, the comment no longer applied. ./src/H5T.c Relaxed the H5Tpack() a little so it would pack compound data structures that had non-transient atomic members. ./tools/h5ls.c Added a `-g' (or `--group') flag that causes information to be printed about the specified group instead of the group's contents. (sort of like Unix's `ls -d'). The `-g' can be used in combination with `-r' to print information about the group and its contents.
* [svn-r1182] Changed name of PABLO Mask to simplify automatic definitions.Dan Wells1999-04-141-1/+1
|
* [svn-r1132] Dataset region references are now finished and working ↵Quincey Koziol1999-03-101-0/+58
| | | | | | | | | | | | | | | | | | | | correctly. Also, there are five new API functions for querying selections: H5Sget_select_hyper_nblocks - retrieves the number of hyperslab blocks in current hyperslab selection for a dataspace H5Sget_select_elem_npoints - retrieves the number of element points in current element selection for a dataspace H5Sget_select_hyper_blocklist - retrieves a list of the hyperslab blocks in current hyperslab selection for a dataspace H5Sget_select_elem_pointlist - retrieves a list of the element points in current element selection for a dataspace H5Sget_select_bounds - retrieves a n-dimensional bounding box containing current selection.
* [svn-r1106] Cleaned up a few compiler warnings, etc.Quincey Koziol1999-02-251-5/+5
|
* [svn-r1081] Changes since 19990218Robb Matzke1999-02-181-6/+8
| | | | | | | | | | | | | ---------------------- ./src/H5Shyper.c Changed hyperslab offset arrays to signed quantities to get rid of warnings on DEC cluster. ./src/H5Flow.c ./src/H5Fprivate.h Changed the objno argument of H5F_addr_pack() to be unsigned to get rid of warnings on DEC cluster.
* [svn-r1010] Changes since 19981217Robb Matzke1999-01-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5private.h Renamed `library_initialize_g' to `H5_libinit_g' to make it conform to our naming scheme. ./src/H5I.c Fixed a bug in H5I_dec_ref() that caused the return value to always be zero instead of the new reference count. ./src/H5.c ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added support for enumeration data types. ./src/H5RA.c Renamed H5T_insert() to H5T_struct_insert() and added H5T_enum_insert(). ./src/H5RA.c ./src/H5Shyper.c Added casts to size_t for the third argument of memcpy() to shut up a warning message from insure++. ./src/H5T.c Changed "can't" to "unable to" in some error messages to be more consistent. ./src/H5detect.c If fork() or waitpid() are unavailable then we assume no alignment constraints. Hopefully this is the case only on NT and Intel CPU's don't have alignment constraints. ./src/H5public.h Include <limits.h> because the H5T_NATIVE_CHAR macro needs the definition for CHAR_MIN.
* [svn-r947] Lots of patches to enable dataset region references. The testing ↵Quincey Koziol1998-11-251-1/+73
| | | | | | for these need to be finished and checked in still.
generated by cgit v0.12 at 2024-11-08 15:23:16 (GMT)