summaryrefslogtreecommitdiffstats
path: root/src/H5T.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r1418] Modified H5Tconvert to require a dataset transfer property ↵Quincey Koziol1999-07-031-21/+42
| | | | | | | | | | | | | list ID as the final parameter (so that VL datatypes have a way to pass in the custom memory allocation routines). Fixed a conversion bug when VL fields were part of a compound datatype that was causing the no-op conversion routine to be used instead of the vlen routine. Added the H5Pset_vlen_mem_manager and H5Pget_vlen_mem_manager routines to allow users to provide their own custom memory allocation routines for VL data read in from the file and reclaimed with H5Dvlen_reclaim. Finished coding on H5Dvlen_reclaim so it works now.
* [svn-r1371] Robb Matzke1999-06-231-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19990618 ---------------------- ./configure.in ./configure [REGENERATED] Now that compound struct conversions don't make so many calls to convert their members I turned the H5T debugging back on by default (it will still be disabled in a production version). ./src/H5AC.c ./src/H5B.c Made it possible to turn off messages about debugging these two packages using the same method as for all other packages. Just supply an invalid file descriptor number or use the shell to redirect said descriptor to /dev/null like this: $ HDF5_DEBUG=99,ac,b 99>/dev/null a.out ./src/H5T.c Changed the name of the old compound conversion function from `struct' to `struct(no-opt)' to be more consistent with the new version named `struct(opt)'. Fixed a bug in H5T_cmp() that caused any two VL types to compare as being equal. Removed duplicate code for bitfield comparisons in H5T_cmp(). ./src/H5Tconv.c Relaxed some constraints in the new compound conversion function so it applies to more cases. Also eliminated a memcpy in a tight loop. ./test/cmpd_dset.c Added a `--noopt' command line switch which unregisters the optimized compound conversion so we can test the non-optimized version.
* [svn-r1362] Robb Matzke1999-06-181-16/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19990616 ---------------------- ./src/H5T.c ./src/H5Tconv.c All conversion functions take an extra argument called `stride' which is the number of bytes to advance the source and destination pointers after each element is converted. If the value is zero then the old behavior is preserved (source and destination values are packed). This feature was necessary to implement the compound datatype conversion optimizations and it causes a minor change to the API (application-defined type conversion functions take an extra size_t stride argument). ./src/H5Tconv.c An additional compound data type conversion function was added which is applied unless the destination type is larger than the source type. I'm measuring significant performance increases for certain operations: Test Name Struct-Conv Noop-Conv New(Old) MB/s New(Old) MB/s ---------- ------------- ------------- Reordering 2.062(0.3936) 54087(0.9047) Subsetting 2.901(0.6581) 40192(1.1100) Shrinking 1.976(0.3925) 33628(1.1500) ---------- ------------- ------------- ./test/dtypes.c Added various compound datatype conversion tests. Fixed return values from functions. ./src/H5T.c Conversion timers are updated only if H5T debugging is turned on a runtime (in addition to compile time). This allows the data type layer to be compiled with debugging support without having to pay a big runtime penalty if the debugging isn't actually used. ./src/H5A.c ./src/H5D.c ./src/H5Ofill.c ./src/H5P.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added the stride argument to the H5T_convert() calls. The stride is always zero, which means that the source and destination data values are packed. ./configure.in ./configure [REGENERATED] If API tracing is turned off then libhdf5.settings will say `no' instead of nothing. ./test/flush1.c ./test/flush2.c Added better error messages in a couple places.
* [svn-r1357] Fixed some typo and missing #include. Works again forAlbert Cheng1999-06-171-1/+1
| | | | the Parallel version.
* [svn-r1340] Changes since 19990611Robb Matzke1999-06-141-99/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./doc/html/H5.format.html Added documentation for opaque data types (bitfield types were already documented but they were out of order). ./src/H5E.c Fixed a bug with glibc2 on linux systems where `stdout' is an extern and can't be used to initialize static data. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5detect.c Removed the `_T' from the new C9x types I just added so the names are consistent with existing types. Besides, the fact that something is a datatype is obvious because it starts with H5T_NATIVE_. ./tools/h5ls.c Added the new C9x data types. H5ls prints one of these types only if it doesn't match one of the builtin C types. Prints the OID for shared data types. Fixed a formatting bug with symbolic links which was introduced a few changes ago. The commandline has been changed so that objects from multiple files can be listed with a single command. Instead of specifying a file name and an optional list of objects, each thing to print is a file name and object concatenated. H5ls figures out how to devide the name into a file name and object name even when the file name part doesn't correspond to an actual Unix file. Old syntax: h5ls [OPTIONS] FILE [OBJECTS] New syntax: h5ls [OPTIONS] FILE[/OBJECT] [FILE[/OBJECT]]... Example ({X,Y} is expanded by the shell) Old command: h5ls -d ../test/x.data dir1 dir2 New command: h5ls -d ../test/x.data/{dir1,dir2} The filename is printed as part of the object name when full names are requested (--full or --recursive). If people really don't like this they can undefine a constant at the top of h5ls. Errors from the hdf5 library are turned off. Commandline switches of the form `--width 80' are accepted in addition to `--width=80'. This is more symmetric with single-letter switches that take two forms: `-w 80' and `-w80'. ./src/H5D.c Added tracing instrumentation for H5Dvlen_reclaim(). ./src/H5private.h Added casts to int for the isalpha() et al macros to shut up solaris warnings about char subscripts.
* [svn-r1332] Fixes to get the VL datatypes working. The only function ↵Quincey Koziol1999-06-111-0/+39
| | | | | | currently working is H5Tvlen_create().
* [svn-r1328] Changes since 19990608Robb Matzke1999-06-111-17/+236
| | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./configure [REGENERATED] ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5config.h.in [REGENERATED] ./src/H5detect.c ./src/H5private.h Added checks for the C9x integer types like int32_t, int_least32_t, and int_fast32_t and the unsigned versions. HDF5 defines H5T_NATIVE_* versions (all caps) to be the same as the type provided by the C library, otherwise it defines them as integers exactly the specified size. Hardware type conversion functions are used when the types match some C-language type (like `int').
* [svn-r1305] Checkpointing the VL datatype code. I believe the core ↵Quincey Koziol1999-06-041-7/+120
| | | | | | | | functionality is here, accessed with H5Tvlen_create, but I need to start writing tests now. Also the more esoteric API calls (such as H5Tget_vlen_buf_size and the memory management calls) aren't implemented yet.
* [svn-r1292] Changes since 19990430Robb Matzke1999-06-021-37/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- Remove changes from CVS ./bin/release Added a `--nocheck' switch which causes the script to not check the contents of the MANIFEST file against CVS. This is sometimes useful when you need to make a quick snapshot but the MANIFEST file is not quite up to date. ./src/H5D.c Removed warnings for unused variables ./src/H5Fprivate.h Removed the WIN32 definition for `uint' and changed the data type for `eof_written' from `uint' to `uintn'. Shouldn't this really be `hbool_t'? ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./test/dtypes.c ./doc/html/H5.format.html Added support for bitfields and opaque data types.
* [svn-r1224] Changes since 19990426Robb Matzke1999-04-271-66/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5tools.c ./tools/h5tools.h Finally fixed a long-standing bug that caused core dumps if a compound datum rendered to more than some number of characters (we kept bumping up the limit at the risk of violating stack size limits on some machines). The fix works only on systems that have the vsnprintf() function (otherwise a 4kB limit is imposed, which if violated probably dumps core). If vsnprintf() is present then the library dynamically allocates space for the output string. Also made it possible to control how compound data is rendered across multiple lines of output by allowing the caller to specify where optional line-breaks get inserted. The output functions split up the value at one or more optional line-breaks to prevent it from wrapping around the screen. If a datum doesn't fit on the current line but would fit on the next line then it is printed on the next line regardless of whether optional line-breaks would have prevent wrapping around the screen. This makes it easier to find the beginnings of compound data values. This feature is disabled by default but can be enabled by the application. If a datum doesn't fit on the current line and the previous datum also occupied more than one line then we move to the next line before printing. This makes it easier to find the beginnings of compound data values but prevents the output from looking fragmented if there are only a few long values among mostly short values. This feature is disabled by default but can be enabled by the application. The application can control the printf() formats used for all the native data types. The defaults are what the library used to use: %g, %ld, %lu, %d, and %u ./tools/h5ls.c Compound datatype values can now be split across multiple lines of output instead of just wrapping. Also, when lots of compound values are too long they all start at the beginning of a line. This only required about 10 lines of changes in the setup for tools library calls (I didn't modify the h5dump program because it uses its own version of the tools library that forked off long ago). Added code for Win32 which is unable to cast `unsigned long long' to `double'. If the dataset size exceeds (2^63)-1 then the percent utilization is not displayed (this is easily possible with chunked datasets). This is untested yet. ./configure.in ./src/H5config.h.in ./src/H5.c ./src/H5private.h Check for vsnprintf() and provide a simple, stupid definition if it isn't available. The stupid definition just calls vsprintf() and ignores the second argument. This can result in buffer overflows in h5ls and h5dump since vsprintf() is an unsafe function (and anyone can create an hdf5 file that runs an arbitrary command from h5ls and h5dump in that case)! ./config/conclude.in Remove more *.o files for `make clean' ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c Cleaned up a memory leak during H5_term_library() by allowing H5I_clear_group() to skip items that couldn't be freed. This allows the item to remain in the group until we can free it later. ./src/H5F.c The H5F_close_all() function fails if a file cannot be closed.
* [svn-r1184] Changes since 19990402Robb Matzke1999-04-151-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in Fixed so private libraries are not installed publicly. The installation directories `bin', `include', and `lib' are created mode 755. ./src/H5.c ./src/H5A.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Vprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h ./test/chunk.c ./test/dsets.c ./test/dtypes.c ./test/h5test.c ./test/overhead.c ./test/ragged.c ./test/tattr.c ./tools/h5dump.c ./tools/h5findshd.c ./tools/h5ls.c Changed `__unused__' to `UNUSED' to fix a conflict with GNU header files. ./src/H5Tpkg.h ./test/h5test.h Removed __unused__ from forward function declarations. ./src/H5P.c Removed a comment about restrictions for the type conversion temporary buffers. Thanks to Quincey, the comment no longer applied. ./src/H5T.c Relaxed the H5Tpack() a little so it would pack compound data structures that had non-transient atomic members. ./tools/h5ls.c Added a `-g' (or `--group') flag that causes information to be printed about the specified group instead of the group's contents. (sort of like Unix's `ls -d'). The `-g' can be used in combination with `-r' to print information about the group and its contents.
* [svn-r1169] ./configure.inRobb Matzke1999-03-301-39/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./configure [REGENERATED] ./src/H5D.c ./src/H5O.c Removed H5AC, H5B, and H5T from the default list of packages to debug (because they're pretty expensive debugging), and added H5O. Also fixed a bug for undefined variable in H5D when H5S debugging is turned on but H5T debugging is turned off. ./config/conclude.in Fixed installation of header files for building in a directory other than the source directory. This fixes a bug where H5config.h wasn't being installed. ./src/H5.c ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Tprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Changed the way the library shuts down again. Now it handles cycles between packages and isn't so sensitive to dependencies between packages. A package might shut down only to be restarted to process a request from some other package being shut down. Loops are detected after 100 iteractions and the shutdown is aborted with a message on standard error. This also makes it a lot easier to debug. ./src/H5A.c Fixed H5A_write() and H5A_read() so they pass a non-null background buffer to the conversion functions. This is necessary when an attribute has a compound data type. ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsec2.c Reindented new Win32 stuff. ./src/H5Odtype.c Fixed a bug when enumeration types are used in a compound data type. The byte pointer wasn't incremented after the type information was written. ./tools/h5ls.c Compound data types display their total size because it's not always obvious from looking at the members. Scalar attributes show their space as `scalar' instead of `{}'. The index value is not printed for attributes that have only a few values. Instead the word `Data:' is printed on the first line of attribute data. Named types display their data type only if verbose output was requested.
* [svn-r1146] Added support for object references to named datatypes.Quincey Koziol1999-03-181-4/+39
|
* [svn-r1101] Changes since 19990219Robb Matzke1999-02-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/irix64 The old (-32) compiler is now supported by setting envrionment CC='cc -32'. The -64 compiler is the default or you can set CC='cc -64'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5G.c ./src/H5I.c ./src/H5Ocomp.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Z.c ./src/H5detect.c ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/enum.c ./test/mtime.c ./test/ohdr.c ./tools/h5ls.c Fixed lots of warnings on Irix64. Mailed a few remaining warnings in H5S to Quincey and a few in the dumper to Ruey-Hsia.
* [svn-r1087] Changes since 19990218Robb Matzke1999-02-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5F.c ./src/H5private.h ./src/H5Ipublic.h ./src/H5O.c Fixed a rather nasty bug with file closing that caused the file boot block to be updated incorrectly, effectively truncating the file. The bug I fixed was triggered by: 1. Create a file, F 2. Open an object, X 3. Close file F 4. Reopen file F for read/write. 5. Create and close some objects 6. Close file F 7. Close library (exit). Step 3 pended the close because object X is still open, but the file ID was removed from the H5I_FILE ID group. Step 4 created a new file because it didn't see any matching file on the H5I_FILE ID group. Step 5 extends the file. Step 6 writes the new file boot block to disk. Step 7 closes object X and completes the close from step 3, writing the old boot block information to disk. The new behavior is that step 3 moves the file from the H5I_FILE group to the H5I_FILE_CLOSING group. Step 4 searches both groups and finds the file. Step 5 extends the file using the same H5F_file_t struct as step 3. Step 6 closes the H5F_t struct opened in step 3 but not the H5F_file_t struct shared by steps 1 and 3. Step 7 closes object X which closes the H5F_file_t from step 1, flushing the boot block which was shared by all steps. ./src/H5F.c Added some bulletproofing to file reference counting and removed comments which no longer apply. Added H5F_flush_all() and H5F_close_all() which apply to all files. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c Added the new H5I_free_t data type to describe the function type to be passed as the `free_func' argument to H5I_init_group(). ./src/H5I.c Bulletproofed the object removal functions. Removed comments which no longer apply. Changed global variable names so they don't violate the naming scheme. Added H5I_debug() that prints the contents of an ID group. Removed H5I_inc_ref() because it isn't used. Reindented a couple of functions. ./src/H5.c ./src/H5G.c ./src/H5Ipublic.h Changed H5I_MAXID to H5I_NGROUPS to better relect the fact that it's the total number of valid ID groups. ./src/H5Shyper.c Changed hyperslab offset arrays to signed quantities to get rid of warnings on DEC cluster. ./src/H5Flow.c ./src/H5Fprivate.h Changed the objno argument of H5F_addr_pack() to be unsigned to get rid of warnings on DEC cluster.
* [svn-r1065] Changes since 19990121Robb Matzke1999-02-151-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5public.h ./src/H5Omtime.c Check for <stddef.h> Checks for `__tm_gmtoff' in `struct tm' because old versions of GNU libc are different than recent versions. This fixes the failing mtime test. ./bin/config.guess ./config/freebsd2.2.7 [REMOVED] ./config/freebsd [ADDED] Changed the name so it works with all versions of FreeBSD. ./src/H5.c Moved H5F after H5T and H5G in H5_term_library() to satisfy dependencies. ./src/H5G.c Fixed a bug that caused H5Gcreate() to fail if the group name had trailing slashes. ./src/H5Gpublic.h Changed `group_name' to `name' in a prototype. ./src/Makefile.in Dynamic library on Linux, but needs for work to be generally useful. ./src/H5HG.c ./src/H5HGprivate.h Fixed alignment problems when using old GCC compilers (like the one shipped with RedHad Linux). ./tools/h5ls.c Fixed a bug where the contents of the root group could be listed twice if there was a link back to the root group. Similarly for groups that are mentioned on the command line. Fixed a bug where unknown types were printed with a random type class number. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h Fixed O(log N) conversion bugs.
* [svn-r1015] Got rid of some warning messages.Albert Cheng1999-01-071-2/+2
| | | | Tested in O2K.
* [svn-r1010] Changes since 19981217Robb Matzke1999-01-071-275/+1507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5private.h Renamed `library_initialize_g' to `H5_libinit_g' to make it conform to our naming scheme. ./src/H5I.c Fixed a bug in H5I_dec_ref() that caused the return value to always be zero instead of the new reference count. ./src/H5.c ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added support for enumeration data types. ./src/H5RA.c Renamed H5T_insert() to H5T_struct_insert() and added H5T_enum_insert(). ./src/H5RA.c ./src/H5Shyper.c Added casts to size_t for the third argument of memcpy() to shut up a warning message from insure++. ./src/H5T.c Changed "can't" to "unable to" in some error messages to be more consistent. ./src/H5detect.c If fork() or waitpid() are unavailable then we assume no alignment constraints. Hopefully this is the case only on NT and Intel CPU's don't have alignment constraints. ./src/H5public.h Include <limits.h> because the H5T_NATIVE_CHAR macro needs the definition for CHAR_MIN.
* [svn-r971] Changes since 19981214Robb Matzke1998-12-171-1186/+936
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added warning that enabling debugging code can adversely affect performance even when the debugging isn't turned on at run-time. Performance testing shows that under certain circumstances (like data type conversions of compound types) the H5_timer functions, although only a few lines each, contribute a fairly large percent to the execution time. ./src/H5T.c ./src/H5Tpkg.h ./src/H5Tpublic.h Improved the H5Tunregister() function to make unregistering more flexible. It takes the same arguments as H5Tregister() but also accepts wild cards. All conversion functions that match the H5Tunregister() search criteria are removed from the global type conversion table. The H5Tregister_hard() and H5Tregister_soft() were combined into a single function called H5Tregister() which is the counterpart to H5Tunregister(). A new `persistence' argument was added to differentiate between the two types of conversion functions. The application is allowed to register a hard conversion function for the no-op conversion path although the library isn't obligated to call it (it usually does). This is mostly for completeness, but the application might use it to help determine if the raw data pipeline was able to use the optimized path for the case when no type conversion is necessary. The library doesn't allow this path to be unregistered although the application can redefine it as often as it likes. Fixed the type conversion tables in preparation for MT-safety and to fix previosly-known design bugs wrt. unregistering conversion functions or changing the C function associated with a conversion path. The MT-safety stuff is documented in a separate white paper. Increased the conversion function debugging name from 9 characters to 31 characters so the output can be more descriptive. Moved conversion path statistics from the H5T_cdata_t member into the conversion path itself. This makes H5T_cdata_t contain only application-visible data structures. ./src/H5A.c ./src/H5D.c ./src/H5Ofill.c ./src/H5P.c ./src/H5T.c Improved the way type conversion functions are called so the caller doesn't have to check for data type debugging and increment type conversion timers and statistics. Changed check for no-op conversion since it is now application-definable and there may even be more than one definition at a time in a multi-threaded application (one thread might be using the no-op conversion path when some other thread changes its definition -- the first thread still sees the original defintion until it's done with the operation). ./doc/html/Datatypes.html Updated the user guide to reflect the changes to data type conversion registration functions. ./bin/trace ./src/H5.c Added tracing support for the new H5T_pers_t data type. ./test/dtypes.c Added printf to display alignment value if non-aligned data types are being tested. ./test/h5test.c Modified the H5Tunregister() calls to use the new arguments. All 94 of those calls can be replaced by a single call to the new H5Tunregister() function. ./src/H5.c Added HAVE_GETTIMEOFDAY around an auto variable and initialized the elapsed time to zero when gettimeofday() is not available. ./src/H5F.c ./src/H5Fprivate.h ./src/H5P.c Added an H5*_init() functions which do the same thing as H5*_init_interface() but can be called from other packages and don't do anything if the interface is already initialized. This fixes a couple memory leaks in applications that repeatedly close and open the library with H5close(). ./src/H5Tconv.c Optimized some data alignment code in the hardware conversion functions. Hardware conversions accumulate statistics about source and destination data alignment and print that information when the conversion function is unregistered (usually when the application exits) if data type debugging is compiled into the library and enabled at run-time. The conversion caching was cleaned up for the compound data type conversion function. It now caches conversion paths in a manner that will be MT-safe and is much simpler than the old method. Also cleaned up some array index maps. ./src/H5detect.c Fixd mispelling of alingemnt. ./src/H5private.h Changed `TRUE' to `1' in assignment to interface_initialize_g in FUNC_ENTER macro definition. ./tools/testh5dump.sh Completely rewritten to make it shorter, better documented, and conforming to most of the other test outputs. The comparison of the actual output with the expected output is insensitive to differences in white space. The test now passes for the first time on Linux where the output width wasn't as expected but the output was otherwise correct. ./tools/testfiles/tall-1.ddl ./tools/testfiles/tall-2.ddl ./tools/testfiles/tall-3.ddl ./tools/testfiles/tattr-1.ddl ./tools/testfiles/tattr-2.ddl ./tools/testfiles/tattr-3.ddl ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tcomp-1.ddl ./tools/testfiles/tcomp-2.ddl ./tools/testfiles/tcomp-3.ddl ./tools/testfiles/tcomp-4.ddl ./tools/testfiles/tdset-1.ddl ./tools/testfiles/tdset-2.ddl ./tools/testfiles/tdset-3.ddl ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tgroup-1.ddl ./tools/testfiles/tgroup-2.ddl ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tlink-1.ddl ./tools/testfiles/tlink-2.ddl ./tools/testfiles/tlink-3.ddl ./tools/testfiles/tlink-4.ddl ./tools/testfiles/tlink-5.ddl ./tools/testfiles/tslink-1.ddl ./tools/testfiles/tslink-2.ddl Changed `../h5dump' to just `h5dump'. ./config/alpha-dec-osf4.0 Added more warning and optimization switches to the native compiler.
* [svn-r968] Changes since 19981207Robb Matzke1998-12-141-63/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added tcompound2.{dmp,h5} and tdset2.{dmp,h5} used by the h5toh4 testing. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Added check for <sys/timeb.h> for Win32. Determines sizeof(char) just so we have a complete list of type sizes defined as preprocessor symbols. ./src/H5detect.c ./src/H5T.c ./src/H5Tpkg.h Detects alignment constraints. In order for this to work the operating system must not correct unaligned data (for instance, on the DEC Alpha one might need to say `uac p sigbus' before running H5detect). ./src/H5private.h Includes <signal.h> because it's needed by H5detect.c to detect alignment constraints. ./src/H5Tconv.c Added extra checks to all hardware conversion functions so they align data when necessary before the conversion. This slows down the conversions somewhat but they're still much faster than the software conversions. ./test/dtypes.c By setting a constant at the top of the source you can test conversions where the data is aligned on various byte boundaries. By setting a constant at the top of the source you can simulate architectures that have alignment constraints on architectures that don't. Changed typo SIZEOF_LDOUBLE to SIZEOF_LONG_DOUBLE in a few places.
* [svn-r956] Fixes for dataset region code.Quincey Koziol1998-11-301-0/+1
|
* [svn-r952] Changes since 19981125Robb Matzke1998-11-251-37/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./doc/html/Datatypes.html ./src/H5.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5detect.c ./test/chunk.c ./test/dtypes.c ./test/h5test.c ./test/mtime.c ./test/tattr.c ./test/th5s.c ./tools/h5dump.c ./tools/h5dumputil.c ./tools/h5import.c ./tools/h5ls.c ./tools/h5toh4.c ./tools/h5tools.c Renamed the old H5T_NATIVE_CHAR type to H5T_NATIVE_SCHAR to denote that it is always signed. Added a new H5T_NATIVE_CHAR type which has the same range, representation, and behavior as either H5T_NATIVE_SCHAR or H5T_NATIVE_UCHAR depending on the compiler and its command-line switches for the application source file which references H5T_NATIVE_CHAR. If source files are compiled with different switches then each source file will resolve H5T_NATIVE_CHAR appropriately so it matches the C type `char' in that source file. NOTE: THERE ARE OTHER DOCUMENTATION FILES THAT I DIDN'T CHANGE BECAUSE I CAN'T MODIFY THE SOURCE. ./test/extend.c Swapped two lines to prevent diagnostic messages from messing up the formatted output.
* [svn-r949] Changes since 19981124Robb Matzke1998-11-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
* [svn-r947] Lots of patches to enable dataset region references. The testing ↵Quincey Koziol1998-11-251-2/+2
| | | | | | for these need to be finished and checked in still.
* [svn-r936] Changes since 19981119Robb Matzke1998-11-211-113/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
* [svn-r928] Changes since 19981118Robb Matzke1998-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5Smpio.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpublic.h ./src/H5detect.c ./src/H5private.h ./src/H5public.h ./test/big.c The `long long' type isn't quite as prevalent as we had hoped; there is at least one system that defines `__int64' but not `long long'. Therefore, I've temporarily changed all occurrences of `long long' to `long_long' and then #define that in H5private.h based on the existence of `long long' or `__int64'. This gets rid of some #ifdef's in other parts of the code. The semantics of the hdf5 types are: *int8_t Exactly one byte *int16_t At least two bytes. We favor 32-bit integers over 16-bit integers if the 16-bit integer is 4-bytes wide (Cray) *int32_t At least four bytes. *int64_t At least eight bytes long_long The widest integral integer type The H5Smpio.c contains debugging code which is non-portable. ./tools/h5ls.c Changed the order native types are detected so we favor the name `int' over `short' or `long' if two of them are the same. ./config/conclude.in Added a rule to make test programs depend on the hdf5 library. This fixes a minor bug where changing H5detect.c and then running `make test' caused H5Tinit.c to not be recompiled and therefore the test files are not relinked.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-88/+662
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r904] Fixed bug in H5dont_atexit.Quincey Koziol1998-11-131-0/+20
| | | | | | | Plugged a memory leak in the union of hyperslabs code. Checkpointing dataset region references, which are working, but not stored in file yet.
* [svn-r876] Changes since 19981102Robb Matzke1998-11-051-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/snapshot Made same fix as for the release script yesterday. ./src/H5D.c ./src/H5Dprivate.h ./src/H5G.c ./src/H5Gprivate.h ./src/H5Gpublic.h ./src/H5O.c ./src/H5Oprivate.h ./src/H5RA.c ./src/H5RAprivate.h ./src/H5T.c ./src/H5Tprivate.h Improved object type checking. Instead of determining the object type by trying to open each of the possible types, we keep a table of associations between object type number (like H5G_GROUP, H5G_DATASET, H5D_TYPE, and H5D_RAGGED) and an `isa' function that returns true if the object header has the right messages to make the object a particular type. This mechanism also allows specialization of object types by permitting an object to satisfy more than one `isa' function. Added `isa' functions for groups, datasets, ragged arrays, and committed data types. ./src/H5config.h.in Added HAVE_STAT_ST_BLOCKS. I thought this had already been added, but apparently not. ./tools/h5ls.c Removed system include files since they're already included by H5private.h and since I wasn't including them portably anyway. By default, 1-byte integer types are printed as integer values instead of ASCII characters. However, the `-s' or `--string' command-line switch causes the data to be interpretted as ASCII. String data types are always printed as character data. Ragged arrays are now identified as ragged arrays and h5ls doesn't descend into the group automatically. This uses the new object type specialization stuff. ./tools/h5tools.c ./tools/h5tools.h Added the ability to print 1-byte integer types as either ASCII or numeric data instead of always ASCII. The default is to print as numeric data.
* [svn-r800] Made a "htri_t" as a return value from "boolean" functions returningQuincey Koziol1998-10-261-4/+4
| | | | TRUE/FALSE/FAIL, hbool_t is now strictly for true boolean values.
* [svn-r797] Changed comments from returning "SUCCEED/FAIL" to ↵Quincey Koziol1998-10-261-116/+54
| | | | | | "non-negative/negative" and also fixed a few more explicit checks against FAIL.
* [svn-r790] Updated parameters for H5R API and changed constants from ↵Quincey Koziol1998-10-261-4/+4
| | | | pointers to references
* [svn-r776] Fixed references, object references should be working now.Quincey Koziol1998-10-221-36/+23
|
* [svn-r773] Changes since 19981019Robb Matzke1998-10-211-13/+20
| | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Fistore.c Improved the hash function so it mixes bits better. This results in a few percent improvement in raw data chunk cache efficiency because there are fewer collisions. ./test/chunk.c Added #define's for chunk preemption `w0' value and number of slots in cache. ./src/H5B.c Added some more comments to H5B_insert_helper() and H5B_remove_helper() and also point to some additional documentation.
* [svn-r767] Commented out printfs.Quincey Koziol1998-10-201-0/+16
|
* [svn-r766] Checkpointing the reference code.Quincey Koziol1998-10-191-103/+128
|
* [svn-r761] Changes since 19981013Robb Matzke1998-10-141-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c Fixed a signed vs. unsigned comparison. ./src/H5D.c Setting a fill value of all zeros will cause the fill value to be written to the dataset instead of relying on the low-level file driver initializing unwritten areas with zero. ./src/H5D.c ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5O.c ./src/H5T.c More file mounting stuff. ./src/H5I.c Fixed a bug where trying to close an invalid object id caused a core dump. For instance, H5Gclose(-1). ./MANIFEST ./test/Makefile.in ./test/mount.c [NEW] Mounting tests. ./src/H5R.c Fixed a couple (herr_t)NULL casts.
* [svn-r737] Changed H5I groups to have a H5I_ prefix before them, to better ↵Quincey Koziol1998-10-051-68/+76
| | | | | | align with the library.
* [svn-r633] Changes since 19980828Robb Matzke1998-08-311-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./RELEASE Updated with important changes I made since the second beta. ./src/H5A.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5G.c ./src/H5Gprivate.h ./src/H5R.c ./src/H5Rprivate.h ./src/H5T.c ./src/H5Tprivate.h Any API function that used to take an `hid_t loc_id' followed by a `const char *name' can now take any type of object for the loc_id as long as the object is somehow associated with a file. Internally, H5G_loc() was modified to return an H5G_entry_t* instead of an H5G_t* so it's more general. Among other things, this allows one to retrieve information about an object like a named type or dataset without knowing the name of the type or dataset: int get_nlinks (hid_t obj) { H5G_stat_t sb; if (H5Gstat(obj, ".", TRUE, &sb)<0) return -1; return sb.nlink; } ./test/gheap.c ./test/istore.c These files needed a couple of changes because they call some of the internal functions whose H5G_t arguments changed to H5G_entry_t. ./src/H5A.c Got rid of all the switch statements for getting symbol table entries for varous objects and replaced them with a call to H5G_loc() allowing attributes to automatically apply to any type of object that belongs to a file. ./test/Makefile.in Moved the ragged array tests from the normal list of tests to the `make timings' target. ./test/ragged.c Added rewrite tests -- rewrite the rows of a dataset changing the number of rows and the length of each row. ./test/mtime.c Added a test that checks that H5Gstat() can be called with a dataset as the first argument. ./src/H5S.c Added #ifdef HAVE_PARALLEL around code to check for the HDF5_MPI_OPT_TYPES environment variable because the global variable that gets set is #ifdef'd. ./bin/release bzip2 uses .bz2 as the file extension.
* [svn-r620] Changes since 19980825Robb Matzke1998-08-271-47/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5R.c [NEW] ./src/H5Rprivate.h [NEW] ./src/H5Rpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/ragged.c [NEW] Preliminary support for 2d ragged arrays for Mark Miller and Jim Reus. Not fully implemented yet. The test is not actually part of `make test' because we still have some memory problems. ./src/H5E.c ./src/H5Epublic.h Added H5E_RAGGED as a major error number. ./bin/release Checks the MANIFEST file against `svf ls' on systems that have it. ./bin/trace Fixed a bug that caused arguments of type `void *x[]' to not be handled. ./src/H5.c Removed unused variables and changed a couple types to fix compiler warnings. Added tracing support for ragged array object ID's and arrays of pointers. ./src/H5D.c H5Dcreate() will complain if either of the property lists are invalid (instead of using the default). ./src/H5D.c ./src/H5Dprivate.h Split H5Dget_space() into an API and internal function so it can be called from the new ragged array layer. ./src/H5Fistore.c Fixed warnings about unsigned vs. signed comparisons. ./src/H5Flow.c Fixed a warning about a variable being shadowed in the MPI-IO stuff. ./src/H5Iprivate.h ./src/H5Ipublic.h Added the H5_RAGGED atom group. ./src/H5Shyper.c Fixed some freeing-free-memory errors that resulted when certain arrays were freed but the pointers were left in the data structures. I simply set the pointers to null after they were freed. ./src/H5Sprivate.h ./src/H5Sselect.c Split the H5Sselect_hyperslab() function into an API and a private function so it could be called from the ragged array layer. Added H5S_SEL_ERROR and H5S_SEL_N to the switch statements to get rid or compiler warnings. ./src/H5Tconv.c Removed a misleading comment. ./test/bittests.c Fixed a warning about a printf(). ./test/cmpd_dset.c Fixed warnings about unused variables because of test #11 being commented out. ./bin/trace Shortened the right margin for the output to allow room for the `);' at the end of the TRACE() macros.
* [svn-r612] SnapshotRobb Matzke1998-08-221-1/+2
|
* [svn-r609] Debugging.htmlRobb Matzke1998-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | Fixed errors H5.c Fixed core dump with setvbuf() for debugging. H5Fistore.c Fixed bug with sparse datasets. H5Omtime.c Found a typo in "Posix Programmer's Guide". The `%z' in the strftime() should be `%Z' instead. H5T.c H5Tpublic.h Improved api tracing for H5Tinsert_array(). h5tools.c Doesn't dump core for empty datasets.
* [svn-r606] Debugging can be enabled/disabled at runtime though code is stillRobb Matzke1998-08-191-17/+28
| | | | | conditionally included at compile time. Tracing and debugging share the same environment variable. All is documented in Debugging.html.
* [svn-r603] Changes since 19980818Robb Matzke1998-08-181-1/+32
| | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c Fixed an argument promotion bug in HDfprintf() ./src/H5Fistore.c Fixed a array bounds read error. ./src/H5HG.c Fixed uninitialized (but unused) data appearing in the hdf5 file, a potential security problem. ./src/H5T.c ./src/H5Tpublic.h Added new data types for hdf5 types: H5T_NATIVE_HSIZE, H5T_NATIVE_HSSIZE, H5T_NATIVE_HERR, and H5T_NATIVE_HBOOL. I did not add H5T_NATIVE_HID since I couldn't think of a reason that it would be stored in a file anyway.
* [svn-r584] Changes since 19980806Robb Matzke1998-08-101-22/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./doc/html/Datatypes.html ./doc/html/H5.format.html ./src/H5.c ./src/H5Odtype.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tpublic.h ./test/dtypes.c Changed the values of the H5T_str_t type in order to make a distinction between C's null terminated strings and strings which are not null terminated. The string character set and padding method are saved to the hdf5 file instead of using defaults. Added conversion function from one fixed-length string type to another. ./test/chunk.c Fixed to work with new filter API
* [svn-r576] *** empty log message ***Robb Matzke1998-08-061-26/+20
|
* [svn-r546] Changes since 19980724Robb Matzke1998-07-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5O.c ./src/H5Oprivate.h ./src/H5Omtime.c [NEW] ./src/H5private.h ./src/Makefile.in Added the modification time message. If an object header has this message then it's value is updated with the current time whenever anything changes in the object header. ./acconfig.h ./configure.in Alas, there seems to be no standard way to convert a string time like 19980727122800 in UTC to a time_t since mktime() only converts local times to time_t. So I've modified the configuration to check for various ways of getting the time zone information: * Added checks for the `tm_gmtoff' field of `struct tm'. * Added a check for the `timezone' global variable. * Added a check for `struct timezone'. * Added a check for BSDgettimeofday(). * Added a check for gettimeofday() although it doesn't actually set the timezone argument on some systems. * Added a check to see if `tm_zone' is a member of `struct tm'. * Added a check to see if `tzname' is a global variable. * Added a check to see if `struct tm' is defined in time.h or sys/time.h. It's not difficult to get the right UTC modification message into the object header, but some systems might have problems getting the right time back out (Irix64 is one) and those systems will report zero for the H5G_stat_t.mtime from an H5Gstat() call as if the mtime message isn't even present. It will, however, continue to be updated as normal. ./src/H5G.c ./src/H5Gpublic.h The H5G_stat_t struct now contains an `mtime' field which will hold the object modification time. If the object has no object modification time then the `mtime' will be initialized to zero. Fixed a bug in H5G_stat() that caused the `objno' field of the H5G_stat_t to be set incorrectly on some machines. ./src/H5D.c Writing to external datasets fail if the hdf5 file is not open for writing. A modification time message is added to the dataset object header when it's created and H5O_touch() is called from H5D_write() to update that message. ./src/H5T.c Fixed a bug in H5Tget_member_dims() that caused a segmentation fault if one of the output array arguments was the null pointer. Relaxed the member dimension checking in H5Tinsert_array() so it can also be used for scalar members. ./test/Makefile.in Added additional file names to the `mostlyclean' target. ./tools/h5dump.c ./tools/h5tools.h Increased the temporary buffer size to 1MB. Added support for printing compound data types with array members. When printing H5T_NATIVE_CHAR and H5T_NATIVE_UCHAR we escape double quote characters. ./tools/h5ls.c Changed the output format a little because we were starting to get too much info to fit on a line. Without `--verbose' each object occupies one line of output. Otherwise, additional information is printed below the object name: object file address, comment, and modification time. If `--dump' is given then the data is printed after the other information. ./test/cmpd_dset.c Changed the way the dataset is initialized to be more uniform.
* [svn-r526] Changes since 19980721Robb Matzke1998-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5ls.c If the dataset is of type H5T_NATIVE_CHAR then we print the value as a string. This is temporary -- I plan to add better control of this later but needed something now for debugging. ./src/H5Fistore.c Squashed a bug in the chunk caching code that caused the wrong chunk to be returned. ./bin/trace ./src/H5.c Added support for printing values of array arguments when the size of the array is supplied by some previous argument. You must declare the argument as an array in order for the automatic tracing stuff to work. For instance, the third argument of H5Pset_chunk() is an array whose size is determined by the second argument `ndims'. Here's how you should declare it: herr_t H5Pset_chunk(hid_t plist_id, intn rank, hsize_t dims[/*rank*/]) The comment inside the `[]' is the name of some previous integer argument (int, unsigned, size_t, ssize_t, hsize_t, hssize_t). The trace output will look something like: H5Pset_chunk(plist=1234567, rank=2, dims=0x112233 {11, 22}) Changed tracing so that data types are printed out symbolically when possible. Changed tracing so data type initializations are not printed. This used to be confusing because lots of H5Tcopy() and H5Tregister...() calls showed up before the applications first explicit API call. ./src/H5Ipublic.h Changed the file atom group from zero to one so printing of atoms during tracing is more consistent -- they're all big numbers now. ./src/H5A.c ./src/H5E.c ./src/H5F.c ./src/H5G.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Accidently modified these when working on the tracing, but nothing should have changed. ./src/H5P.c Changed the definition of H5Pset_chunk() for tracing. ./src/H5S.c ./src/H5Spublic.h Changed the definitions of H5Sset_extent_simple() and H5Screate_simple() for tracing. Changed the FUNC_ENTER() name for H5Screate_simple() so tracing shows the correct name.
* [svn-r473] Changes since 19980708Robb Matzke1998-07-081-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Fistore.c ./src/H5S.c Fixed places where `herr_t' functions returned NULL for failure: H5F_istore_get_addr() and printf(?!?) (probably because a printf() was in the first column :-/ so I don't know what function it really was that I fixed), and H5S_extent_copy(). ./src/H5Fprivate.h Added declarations for H5F_istore_get_addr() and H5F_istore_allocate(). ./src/H5S.c ./src/H5Sprivate.h Split H5Sset_extent_simple() into H5S_set_extent_simple() and replaced calls to the API function with calls to the internal function. Changed calls to H5Screate() to H5S_create() and H5Sclose() to H5S_close(). ./src/H5Shyper.c ./src/H5Spoint.c Removed unused labels and variable. ./src/H5T.c ./src/H5Tconv.c Changed calls to H5Tfind() to H5T_find(). ./src/H5TB.c Split function return type onto a separate line for five functions and added API tracing calls.
* [svn-r469] Changes since 19980707Robb Matzke1998-07-081-15/+101
| | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./bin/trace ./src/H5.c Added tracing support for H5S_seloper_t and H5S_class_t. ./src/H5Sselect.c ./src/H5S.c Added tracing statements that weren't inserted previously because of formatting problems. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h ./test/cmpd_dset.c Added H5Tinsert_array() for inserting an array member into a compound data type. Added support to the struct conversion function for member arrays. The index permutation is not supported yet in the conversion (source and destination must have the same permutations).
generated by cgit v0.12 at 2024-08-23 06:17:59 (GMT)