summaryrefslogtreecommitdiffstats
path: root/src/Makefile.in
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r5879] Raymond Lu2002-08-201-9/+9
| | | | | | | | | Purpose: Design for compact dataset Description: Compact dataset is stored in the header message for dataset layout. Platforms tested: arabica, eirene.
* [svn-r5872] Purpose:Quincey Koziol2002-08-121-3/+4
| | | | | | | | | | | | Code cleanup Description: Move get/set routines for each type of property list (file creation, dataset creation, file access and dataset transfer) into their own source code module. Platforms tested: FreeBSD 4.6 (sleipnir)
* [svn-r5799] Purpose:Quincey Koziol2002-07-151-7/+7
| | | | | | | | | | | | New feature. Description: Added MPI-posix VFL driver. This driver uses MPI to coordinate actions, but performs I/O directly with posix sec(2) I/O functions. This driver should _NOT_ be used if the file accessed is not on a parallel filesystem. Platforms tested: FreeBSD 4.6 (sleipnir) w/parallel & IRIX64 6.5 (modi4) w/parallel
* [svn-r5257] Purpose:Albert Cheng2002-04-251-1/+1
| | | | | | | | | | | | | | | | | | | Bug fix Description: $(LT_RUN) was used to execute ./H5detect in src/Makefile.in. $RUNTEST was set to $(LT_RUN) which was used to execute sequential executable. $(LT_RUN) is "../libtool --mode=execute". But libtool invokes some commands that are not supported in the Tflops machine. That caused failures during the build and check processes. Solution: Upon investigation, there does not seem to be need to use $(LT_RUN) any more. The "libtool --mode=link" now generates a "fake" executable that is actually a command-script file that can regenerate the real executable with dynamic libraries hooks setup properly. Undo all those $LT_RUN substitute and let $RUNSERIAL execute those sequential executables. Platforms tested: Eirene(serial), modi4(parallel)
* [svn-r4757] Purpose:Albert Cheng2001-12-301-2/+2
| | | | | | | | | | | | | | | | | | Removing the DPSS (gridstorage) driver source code. Description: The DPSS (using Grid-Storage) driver is retired. Removed the configure option with-gridstorage from configure.in. Cvs remove the following files ./src/H5FDdpss.c ./src/H5FDdpss.h ./test/dpss_read.c ./test/dpss_write.c Regenerated Dependencies files (some had to be hand-edited since 'make depend' did not cover them.) Removed reference to DPSS Virtual file driver from H5F.c. Platforms tested: modi4 (Parallel; -with-gass=...), eirene, arabica (fortran, cxx).
* [svn-r4620] Purpose:Quincey Koziol2001-11-201-2/+2
| | | | | | | | | Code cleanup Description: Get rid of IDs from internal function calls and some small cleanups from the old-stype => generic property list conversion. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r3640] Purpose:Bill Wendling2001-03-151-4/+3
| | | | | | | | | Bug Fix Description: For some reason, the H5FDstream.h file was defined not once, not twice, but three whole times in the install part... Solution: Removed all but one of those.
* [svn-r3304] Purpose:Quincey Koziol2001-01-181-3/+3
| | | | | | | | Code update Description: Remove ragged array code & tests from library before release. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2652] Purpose:Quincey Koziol2000-10-101-8/+8
| | | | | | | | | | | | | | | Maintainance & performance enhancements Description: Re-arranged header files to protect private symbols better. Changed optimized regular hyperslab I/O to compute the offsets more efficiently from previous method of using matrix operations. Added sequential I/O operations at a more abstract level (at the same level as H5F_arr_read/write), to support the optimized hyperslab I/O. Platforms tested: Solaris 2.6 (baldric) & FreeBSD 4.1.1 (hawkwind)
* [svn-r2611] Purpose:Quincey Koziol2000-09-281-4/+4
| | | | | | | | | | | | | Rearrange code Description: The data sieve buffering code for contiguously stored datasets was wedged in the H5F_arr_read/H5F_arr_write routines. Solution: Created a new H5Fcontig.c to hold I/O routines for contiguously stored datasets (like H5Fistore.c for chunked dataset I/O routines) and moved data sieving code into those routines. Platforms tested: Solaris 2.6 (i.e. baldric)
* [svn-r2574] Purpose:Bill Wendling2000-09-191-6/+6
| | | | | | | | | H5FDstream.h needs to be installed. Description: H5FDstream.h is included in the hdf5.h file and needs to be installed with the other public headers. Solution: Added it to the rest of the install headers.
* [svn-r2559] Purpose:Thomas Radke2000-09-151-8/+8
| | | | | | | | Add the Stream VFD sources to the appropriate makefile variables. Description: Added H5FDstream.c to the LIB_SRC variable and H5FDstream.h to the PUB_HDR variable for building the Stream VFD.
* [svn-r2285] A \ was needed at the end of one of the definitions to make ↵Bill Wendling2000-05-191-1/+1
| | | | gmake work.
* [svn-r2276] Modifed thread-safety code to more closely align with rest of ↵Quincey Koziol2000-05-191-2/+2
| | | | | | HDF5 coding standards.
* [svn-r2264] Added Thread-safe feature. This is the phase 1 implementationChee-Wai Lee2000-05-181-1/+2
| | | | | | that all HDF5 API functions are protected by a mutex lock. Basically, serialized all API calls. To use it, use configure --enable-threadsafe --with-pthread
* [svn-r2223] Added logging version of sec2 file driver. This is _reallly_ ↵Quincey Koziol2000-05-081-3/+3
| | | | | | | useful for tracking the actual I/O locations and space used in a file during an application.
* [svn-r2164] Remove debugging information...Quincey Koziol2000-04-191-2/+2
|
* [svn-r2162] Various small fixes to address SGI compiler warnings.Quincey Koziol2000-04-191-2/+2
|
* [svn-r2141] Fixed some mix up from the last cvs commit.Raymond Lu2000-04-131-3/+3
|
* [svn-r2137] Add SRB as a new VFL, add related info into these source codes.Raymond Lu2000-04-131-6/+8
|
* [svn-r2073] Added free-list code to the library and took out the older ↵Quincey Koziol2000-04-041-17/+17
| | | | | | | "temporary buffer" code, since the functionality was superceded. See the followup document for details on the free-list code.
* [svn-r1976] Added the .lo of H5detect and H5Tinit to the cleanup list.Albert Cheng2000-02-191-1/+1
|
* [svn-r1975] Purpose:Albert Cheng2000-02-181-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration improvement Problem: Arabica has a zlib library that is a dynamic lib in /usr/ncsa/lib. Binary generated would fail to run with a missig libz.so complain if /usr/ncsa/lib is not in $LD_LIBRARY_PATH. This exposed the problem that if the binary is linked with -L$mylibpath -lxyz where libxyz is a dynamic type, the binary can't run if $mylibpath is not in $LD_LIBRARY_PATH (or equivalent) or as part of the system default library paths (e.g., /usr/lib, /usr/local/lib). This problem also caused failures during configure (when trying to see what format to print long long) and during H5detect. The base cause is because libtool does not "transfer" the knowledge of -L$mylibpath to the wrapper file its mode=link generates. Solution: bin/ltmain.sh: Changed it so that it transfers the libpaths from -Llibpaths to the wrapper generated. I used the already defined variable finalize_shlibpath. Not sure it is correct to use it this way. Need to check on this. configure.in: Put in a patch to transfer information from LDFLAGS to LD_LIBRARY_PATH right before the AC_TRY_RUN. The above fix for ltmain.sh does not work here because libtool is generated later than this point. There should be a cleaner way to do this. Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. commence.in: Removed the hardcode of NCSA_LT_LINK_EXE because it is no longer needed. Makefile.in: Another patch of LDFLAGS to LD_LIBRARY_PATH because I could not make it to generate H5detect in the wrapper form of libtool. Need to make it to use the libtool correctly. Later. Platform tested: arabica (solaris 2.7) baldric (solaris 2.6)
* [svn-r1951] Tweaks to detect the shared libraries on NCSA's systems, so that ↵Quincey Koziol2000-01-301-2/+2
| | | | | | Albert's automated tests will work correctly on arabica.
* [svn-r1925] DPSS is checked in.Raymond Lu1999-12-211-2/+2
|
* [svn-r1832] * 1999-11-16Robb Matzke1999-11-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ** configure.in ** configure [REGENERATED] ** src/H5private.h ** src/H5public.h ** src/Makefile.in Generates an H5pubconf.h file which is just like H5config.h except all the preprocessor symbols have `H5_' prepended. This was done so that the configuration results can be used in public header files without polluting the namespace. ** src/H5.c Added H5I_REFERENCE and H5I_VFL to the API tracing code so their names are printed instead of just numbers. ** src/H5FDstdio.c ** tools/h5import.c ** tools/h5repart.c ** tools/pdb2hdf.c Changed to use the `H5_' versions of configure results since these files include only the public API. ** test/big.c Removed a compiler warning. ** test/h5test.c Removed unused code.
* [svn-r1802] Changes since 19991019Robb Matzke1999-11-011-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
* [svn-r1785] Added stdio VFL driver, which uses the new public H5E calls.Quincey Koziol1999-10-201-9/+10
|
* [svn-r1732] Changes since 19991007Robb Matzke1999-10-071-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5FDcore.c Includes private headers instead of public in order to use the `UNUSED' macro. ./src/H5FDpublic.h Includes H5public.h just in case. ./src/H5P.c Removed two unused variables in H5P_copy() ./src/H5FDgass.h Fixed a C++ comment after a `#endif' ./src/Makefile.in The H5FDgass.h file is public and must be installed in order for applications to be able to use HDF5. ./tools/h5tools.c Removed an unused variable.
* [svn-r1621] Added GASS driver. Coded by Saurabh Bagchi, bagchi@uiuc.edu.Albert Cheng1999-08-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor changes done to test/gass_xxx.c so that they print the test skip message when GASS driver is not available. This change is the implementation of GASS within HDF5-1.3 (HDF5 with Virtual File Layer). The GASS driver gives the facility of accessing HDF files on remote ftp servers. To use the GASS driver, the option --with-gass=<GASS path> shoud be specified with configure. An example of the command line used to test the distribution was: ./configure --disable-shared --without-hdf4 --with-gass=/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/include,/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/lib --disable-parallel The user should change the path to point to his local GASS installation. Documentation about the features of GASS and the HDF-GASS design is available separately and till it is put up on the official web site, anyone interested may contact me. Test programs to read, write or append remote files have been provided in the test directory as "gass_read.c", "gass_write.c", "gass_append.c". The test programs have the ftp site to access #define-d at the top of the file which the user can change accordingly. ./src/H5Epublic. Added new error type for file close. ./src/H5F.c Added hooks for the GASS driver. ./src/H5public.h Added header files for GASS & Globus. ./src/Makefile.in Added dependancy on GASS driver in LIB_SRC. ./src/hdf5.h Included header file for GASS driver. ./src/H5FDgass.c [NEW] Routines for the GASS driver. ./src/H5FDgass.h [NEW] Header file for the GASS driver. ./test/Makefile.in Added dependancy on the gass test routines. ./test/gass_read.c File to test remote file reading using GASS. ./test/gass_write.c File to test remote file writing using GASS. ./test/gass_append.c File to test remote file appending using GASS.
* [svn-r1619] ./src/H5O.c [1.2, 1.3]Robb Matzke1999-08-301-1/+2
| | | | | | | | | | | | | | | | Fixed a read-uninitialized-memory error that resulted in the file containing small amounts (<8 bytes each) of uninitialized data. These padding areas (which are never read by hdf5) are initialized to zero now. ./MANIFEST ./src/H5Z.c ./src/H5Zdeflate.c [NEW] ./src/H5Zprivate.h ./src/H5Zpublic.h ./src/Makefile.in The zlib filter was moved to a separate file but is still automatically defined.
* [svn-r1572] Changes since 19990810Robb Matzke1999-08-171-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5FDmulti.c [NEW] ./src/H5FDmulti.h [NEW] ./src/Makefile.in ./src/hdf5.h The split driver was reimplemented as a more general "multi" driver which is capable of splitting data into multiple files like the family driver except the partioning is done by memory usage type instead of address. The H5Pset_fapl_split() function just calls H5Pset_fapl_multi() with arguments which prepare to split the address space into two files: meta and raw data. This is the first version. I plan to allow the open() call to relax a bit which would allow one to open an hdf5 file when only the meta-data file is present. This would allow a very large file to be split and stored on tape and the relatively small meta file to be mirrored on disk to allow limited browsing of the file (any request for raw data would fail). ./src/H5private.h ./src/H5F.c ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c Added the ability for a file driver to store information in the superblock which would be needed if the file were opened again later for reading. The format is driver-defined which allows users to extend it however they like. ./doc/html/H5.format.html Added information about the new driver information block of the superblock. This is where file drivers store information they need in order to reopen the file later. ./src/H5F.c ./src/H5Fprivate.h ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5Fistore.c ./src/H5R.c The file access properties and the file access property list were decoupled, which allows the property list to more cleanly contain properties for various levels of the file and which allows the property list to be modified more cleanly when opening files. ./src/H5.c ./src/H5FDpublic.h Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never used. ./src/H5D.c Changed the way we detect the MPIO driver in all these special cases. ./src/H5F.c ./src/H5Rpublic.h ./test/tfile.c The default file sizeof(offset) was changed to be a function of haddr_t instead of hsize_t. THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES! ./src/H5F.c Fixed an uninitialized memory access bug in file closing related to the VFL. ./src/H5T.c ./src/H5Tpublic.h Added an H5T_NATIVE_HADDR predefined datatype which corresponds to the `haddr_t' type. ./test/Makefile.in Reformatted long lines. ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Removed the H5F_ACC_DEBUG flag from file creation/open calls. ./test/big.c Plugged a memory leak. ./test/h5test.c Added support for the `multi' driver. Removed #warning about not having the stdio driver. Plans are to not implement it since the sec2 driver serves the same purpose and testing didn't show any difference in execution times between the two.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1547] Changes since 19990723Robb Matzke1999-07-271-1/+2
| | | | | | | | | | | | | ---------------------- NOTE: These bug fixes but have been applied only to the 1.3 branch per Albert's request. ./config/gnu-flags [1.3] Added support for gcc-2.95 by adding full optimization and debugging flags and applied a patch from Marcus Daniels. ./src/Makefile.in [1.3] Removes the `libhdf5.settings' file for `make clean'.
* [svn-r1515] Changes since 19990715Robb Matzke1999-07-191-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
* [svn-r1305] Checkpointing the VL datatype code. I believe the core ↵Quincey Koziol1999-06-041-1/+1
| | | | | | | | functionality is here, accessed with H5Tvlen_create, but I need to start writing tests now. Also the more esoteric API calls (such as H5Tget_vlen_buf_size and the memory management calls) aren't implemented yet.
* [svn-r1151] Changes since 19990318Robb Matzke1999-03-191-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
* [svn-r1115] Changes since 19990302Robb Matzke1999-03-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-021-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
* [svn-r1065] Changes since 19990121Robb Matzke1999-02-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in ./acconfig.h ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5public.h ./src/H5Omtime.c Check for <stddef.h> Checks for `__tm_gmtoff' in `struct tm' because old versions of GNU libc are different than recent versions. This fixes the failing mtime test. ./bin/config.guess ./config/freebsd2.2.7 [REMOVED] ./config/freebsd [ADDED] Changed the name so it works with all versions of FreeBSD. ./src/H5.c Moved H5F after H5T and H5G in H5_term_library() to satisfy dependencies. ./src/H5G.c Fixed a bug that caused H5Gcreate() to fail if the group name had trailing slashes. ./src/H5Gpublic.h Changed `group_name' to `name' in a prototype. ./src/Makefile.in Dynamic library on Linux, but needs for work to be generally useful. ./src/H5HG.c ./src/H5HGprivate.h Fixed alignment problems when using old GCC compilers (like the one shipped with RedHad Linux). ./tools/h5ls.c Fixed a bug where the contents of the root group could be listed twice if there was a link back to the root group. Similarly for groups that are mentioned on the command line. Fixed a bug where unknown types were printed with a random type class number. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h Fixed O(log N) conversion bugs.
* [svn-r1032] Changes since 19990118Robb Matzke1999-01-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./tools/h5tools.c Strings are not converted to null-padding before being printed; they are printed with whatever byte values appear in the file. ./tools/h5ls.c Now able to display attribute data type and data. Added a `-f' or `--full' switch which causes the full name of each object to be displayed instead of just the base name. Added a `-r' or `--recursive' switch that recursively prints the contents of groups, avoiding cycles. More bulletproofing for non-printable characters in things like object names, attribute names, and comment strings. We don't want listing a file to send termal escape sequences because it's sometimes possible to execute commands that way. Since h5ls doesn't usually use quotes around object names we must sometimes escape space characters. External files are listed in a table to make the output less confusing. ./tools/h5tools.c ./tools/h5tools.h Changed h5dump() to h5dump_dset() and added h5dump_mem(). Also make h5dump_fixtype() public. ./test/dtypes.c Wrote some data to an attribute to test h5ls attribute printing. ./src/H5ACprivate.h ./src/H5Apublic.h ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5Epublic.h ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gprivate.h ./src/H5HLprivate.h ./src/H5Oprivate.h ./src/H5Ppublic.h ./src/H5RApublic.h ./src/H5Rpublic.h ./src/H5Spublic.h ./src/H5Tpkg.h ./src/H5Tpublic.h ./src/H5Vprivate.h ./src/H5Zpublic.h ./src/H5private.h ./src/H5public.h Reindented function prototypes after `HDF5API' was added. Also rewrapped long lines. ./src/H5Flow.c Added an `#ifdef WIN32' around an unused variable. ./src/H5api_adpt.h Removed extra carriage returns inserted by "broken" operating system. ./src/H5Dprivate.h ./src/H5Oprivate.h ./src/H5Vprivate.h ./src/H5private.h Removed extraneous inclusion of H5api_adpt.h since it's included in H5public.h which is included by everything. ./src/Makefile.in Added H5api_adpt.h to the list of public header files to fix broken `make install'.
* [svn-r914] Changes since 19981113Robb Matzke1998-11-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in The Makefile $TESTS variable has finally been split into $TEST_PROGS and $TEST_SCRIPTS with the latter being the names of shell scripts that need to be run with `/bin/sh'. Now we don't have to copy each shell script before we run it. NOTE: THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE. ./src/Makefile.in Added H5Snone.c to the source list. ./src/H5G.c Plugged a memory leak by emptying the object type "isa" table when the library is closed. ./src/H5Tconv.c ./src/H5Tpkg.h Added 48 new type functions to take advantage of hardware for integer type conversions. These functions are not registered in the conversion table yet because I haven't fully tested them. ./src/H5Tpkg.h Removed __unused__ qualifiers from prototypes.
* [svn-r913] Added $(LDFLAGS) to the make command for H5detect.Albert Cheng1998-11-161-1/+1
| | | | Tested on O2K in both parallel and serial modes.
* [svn-r912] Added H5Snone.cQuincey Koziol1998-11-131-1/+1
|
* [svn-r907] Changes since 19981111Robb Matzke1998-11-131-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
* [svn-r904] Fixed bug in H5dont_atexit.Quincey Koziol1998-11-131-2/+2
| | | | | | | Plugged a memory leak in the union of hyperslabs code. Checkpointing dataset region references, which are working, but not stored in file yet.
* [svn-r743] Added H5I_type_t type to H5_trace and added H5Iget_type function ↵Quincey Koziol1998-10-071-4/+5
| | | | | | call. Also checked in H5R skeleton files.
* [svn-r739] Switched ragged array "H5R" API to "H5RA" to make room for the ↵Quincey Koziol1998-10-061-3/+3
| | | | reference API.
* [svn-r733] Robb Matzke1998-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19980930 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ofill.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/Makefile.in Added fill values as documented in previous e-mails. They only work for chunked datasets so far. ./src/H5E.c ./src/H5Epublic.h ./src/H5P.c Changed H5E_TEMPLATE to H5E_PLIST. ./src/H5Omtime.c ./src/H5V.c Fixed a typo in a comment. ./src/H5Tconv.c Fixed a bug in compound type conversions that caused an assertion to fail.
* [svn-r620] Changes since 19980825Robb Matzke1998-08-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5R.c [NEW] ./src/H5Rprivate.h [NEW] ./src/H5Rpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/ragged.c [NEW] Preliminary support for 2d ragged arrays for Mark Miller and Jim Reus. Not fully implemented yet. The test is not actually part of `make test' because we still have some memory problems. ./src/H5E.c ./src/H5Epublic.h Added H5E_RAGGED as a major error number. ./bin/release Checks the MANIFEST file against `svf ls' on systems that have it. ./bin/trace Fixed a bug that caused arguments of type `void *x[]' to not be handled. ./src/H5.c Removed unused variables and changed a couple types to fix compiler warnings. Added tracing support for ragged array object ID's and arrays of pointers. ./src/H5D.c H5Dcreate() will complain if either of the property lists are invalid (instead of using the default). ./src/H5D.c ./src/H5Dprivate.h Split H5Dget_space() into an API and internal function so it can be called from the new ragged array layer. ./src/H5Fistore.c Fixed warnings about unsigned vs. signed comparisons. ./src/H5Flow.c Fixed a warning about a variable being shadowed in the MPI-IO stuff. ./src/H5Iprivate.h ./src/H5Ipublic.h Added the H5_RAGGED atom group. ./src/H5Shyper.c Fixed some freeing-free-memory errors that resulted when certain arrays were freed but the pointers were left in the data structures. I simply set the pointers to null after they were freed. ./src/H5Sprivate.h ./src/H5Sselect.c Split the H5Sselect_hyperslab() function into an API and a private function so it could be called from the ragged array layer. Added H5S_SEL_ERROR and H5S_SEL_N to the switch statements to get rid or compiler warnings. ./src/H5Tconv.c Removed a misleading comment. ./test/bittests.c Fixed a warning about a printf(). ./test/cmpd_dset.c Fixed warnings about unused variables because of test #11 being commented out. ./bin/trace Shortened the right margin for the output to allow room for the `);' at the end of the TRACE() macros.