summaryrefslogtreecommitdiffstats
path: root/test/Makefile.in
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r5257] Purpose:Albert Cheng2002-04-251-2/+0
| | | | | | | | | | | | | | | | | | | Bug fix Description: $(LT_RUN) was used to execute ./H5detect in src/Makefile.in. $RUNTEST was set to $(LT_RUN) which was used to execute sequential executable. $(LT_RUN) is "../libtool --mode=execute". But libtool invokes some commands that are not supported in the Tflops machine. That caused failures during the build and check processes. Solution: Upon investigation, there does not seem to be need to use $(LT_RUN) any more. The "libtool --mode=link" now generates a "fake" executable that is actually a command-script file that can regenerate the real executable with dynamic libraries hooks setup properly. Undo all those $LT_RUN substitute and let $RUNSERIAL execute those sequential executables. Platforms tested: Eirene(serial), modi4(parallel)
* [svn-r5191] Purpose:Quincey Koziol2002-04-171-1/+1
| | | | | | | | | | | | | | | | | | | Bug fix Description: When several level deep nested compound & VL datatypes are used, the data in the nested compound datatypes is incorrectly sharing the same "background buffer", causing data corruption when the data is written to the file. Solution: Allocate a separate background buffer for each level of the nested types to convert. (Also allocate temporary background buffers for array datatypes, where this sort of problem could occur also) Added more regression tests to check for these errors. Platforms tested: FreeBSD 4.5 (sleipnir) & Solaris 2.6 (baldric)
* [svn-r5177] Pedro Vicente Nunes2002-04-121-1/+1
| | | | | Purpose: added 2 files to remove by set_extent test
* [svn-r5158] Purpose:Bill Wendling2002-04-101-5/+5
| | | | | | | Update Description: Changed set_extend to set_extent to reflect the change in the filename...
* [svn-r5097] Purpose:Quincey Koziol2002-03-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug Fix Description: Regression test for following bug: The H5Gget_objinfo() function was not setting the 'fileno' field in the H5G_stat_t struct passed in. Solution: Added a "file serial number" to each file currently open in the library and put that in the 'fileno' field. If a file is opened twice (with H5Fopen) and the VFL driver detects that it is the same file (i.e. the two file structures have the same "shared file info" in the library's memory structures), they will have the same serial number. This serial number has two drawbacks: - If a VFL driver doesn't/can't detect that two calls to H5Fopen with the same file actually _are_ the same file, each will get a different serial number - If the same file is closed and re-opened, the serial number will be different. It is be possible to fix the second drawback for many VFL drivers, but it would be a lot of effort and probably isn't worth it until we've got a good reason to do it. Dunno if we'll ever be able to fix the first drawback... Platforms tested: FreeBSD 4.5 (sleipnir) VS: ----------------------------------------------------------------------
* [svn-r4943] Purpose:Bill Wendling2002-02-121-23/+23
| | | | | | | | | Cleanup Description: Added set_extend.h5 file to the CLEANUP macro in the Makefile so that it'll be removed when the other temp files are removed. Platforms tested: Linux
* [svn-r4942] Purpose:Bill Wendling2002-02-121-4/+8
| | | | | | Feature Add Description: Added set_extend to the MANIFEST and test/ directory Makefile.
* [svn-r4869] Purpose:Quincey Koziol2002-01-271-1/+2
| | | | | | | | Add regression tests Description: Added regression test for using a VL-datatype in two separate files. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r4851] Purpose:Quincey Koziol2002-01-231-4/+4
| | | | | | | | | | | | | | | | | | Bug Fix Description: When file space was returned to the file space free-list for reuse, occasionally raw data allocations which used space from the free-list would overlap with the metadata accumulator and get over-written with the cached information in the accumulator, corrupting the data. Solution: Check if the space about to be recycled on the free-list is going to be used for raw data and also overlaps with the metadata accumulator cache, avoiding using space that fits those criteria. This fixes bug #701 Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r4757] Purpose:Albert Cheng2001-12-301-10/+4
| | | | | | | | | | | | | | | | | | Removing the DPSS (gridstorage) driver source code. Description: The DPSS (using Grid-Storage) driver is retired. Removed the configure option with-gridstorage from configure.in. Cvs remove the following files ./src/H5FDdpss.c ./src/H5FDdpss.h ./test/dpss_read.c ./test/dpss_write.c Regenerated Dependencies files (some had to be hand-edited since 'make depend' did not cover them.) Removed reference to DPSS Virtual file driver from H5F.c. Platforms tested: modi4 (Parallel; -with-gass=...), eirene, arabica (fortran, cxx).
* [svn-r4474] Purpose:Albert Cheng2001-09-261-5/+5
| | | | | | | | | | | | New feature. Description: Added a test to verify the correctness of information provided by configure in H5config.h. Some information, such as SIZEOF some types can be hardcoded by config/<machine>. This test verified the information is indeed correct. Currenly, only size of C language types are verified. Platforms tested: Eirene, regular, arabica.
* [svn-r4364] Purpose:Albert Cheng2001-08-161-15/+6
| | | | | | | | cleanup Description: chunk, iopipe, overhead have been moved to perform/. Platforms tested: eirene(parallel).
* [svn-r4281] Purpose:Quincey Koziol2001-07-301-7/+10
| | | | | | | | Additional test Description: Added metadata cache abuser code to the 'timings' target in the tests. Platforms Tested: FreeBSD 4.3 (hawkwind)
* [svn-r3304] Purpose:Quincey Koziol2001-01-181-6/+3
| | | | | | | | Code update Description: Remove ragged array code & tests from library before release. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2872] Purpose:Quincey Koziol2000-11-121-6/+7
| | | | | | | | | Code update Description: Added stub for generic property testing, although it doesn't do anything yet. Platforms tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2844] Purpose:Quincey Koziol2000-11-091-8/+9
| | | | | | | | | | | | | | | | | | | New Feature Description: Added array datatype tests to the regression tests. These datatype combinations are tested currently: 1-D array of atomic datatypes 3-D array of atomic datatypes array of array of atomic datatypes array of compound of atomic datatypes array of compound of array datatypes array of VL of atomic datatypes array of VL of array datatypes Also added a test to verify that the older style compound datatype with array fields works correctly. Platforms tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2699] Purpose:Quincey Koziol2000-10-191-3/+3
| | | | | | | | | | | | | | | Bug fix Description: "Time" datatypes (H5T_UNIX_D*) were not being stored and retrieved in the datatype object header message correctly. Solution: Store endian-ness and precision in the datatype object header message and added test to continue to track them working correctly. This fixes bug #512. Platforms tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2561] Purpose:Thomas Radke2000-09-151-2/+5
| | | | | | | Add the Stream VFD test program to the 'make check' targets. Description: Added stream_test to the TEST_PROGS variable and a rule to build it.
* [svn-r2539] Removed the -R$(ZLIB_DIR) flag since that is now being taken ↵Bill Wendling2000-09-121-37/+35
| | | | | | care of much more nicely in the config/commence file...
* [svn-r2529] Added a -R<directory> flag to the LT command line. If we compile ↵Bill Wendling2000-09-081-36/+37
| | | | | | | | | | | | | with zlib, and zlib isn't in our LD_LIBRARY_PATH or in a standard system library place (/usr/lib or /lib), then the tests can't run. This fixes it if the person configures the source with the flag: --with-zlib=/usr/fnord/include,/usr/fnord/lib This only works if you're pointing to the shared library version in the above flag...
* [svn-r2264] Added Thread-safe feature. This is the phase 1 implementationChee-Wai Lee2000-05-181-3/+17
| | | | | | that all HDF5 API functions are protected by a mutex lock. Basically, serialized all API calls. To use it, use configure --enable-threadsafe --with-pthread
* [svn-r2222] Added TBBT testing code.Quincey Koziol2000-05-081-4/+4
|
* [svn-r2142] Re-added titerate.c to makefile...Quincey Koziol2000-04-131-2/+2
|
* [svn-r2138] Add SRB as a new VFL, these are its testing programs.Raymond Lu2000-04-131-8/+19
|
* [svn-r2082] Added additional group & attribute iteration tests.Quincey Koziol2000-04-051-7/+7
|
* [svn-r1925] DPSS is checked in.Raymond Lu1999-12-211-2/+8
|
* [svn-r1802] Changes since 19991019Robb Matzke1999-11-011-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
* [svn-r1690] Added VL string test code.Quincey Koziol1999-09-291-3/+3
|
* [svn-r1621] Added GASS driver. Coded by Saurabh Bagchi, bagchi@uiuc.edu.Albert Cheng1999-08-311-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor changes done to test/gass_xxx.c so that they print the test skip message when GASS driver is not available. This change is the implementation of GASS within HDF5-1.3 (HDF5 with Virtual File Layer). The GASS driver gives the facility of accessing HDF files on remote ftp servers. To use the GASS driver, the option --with-gass=<GASS path> shoud be specified with configure. An example of the command line used to test the distribution was: ./configure --disable-shared --without-hdf4 --with-gass=/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/include,/afs/ncsa/projects/hdf/v5/bagchi/globus/GLB/development/sparc-sun-solaris2.6_nothreads_standard_debug/lib --disable-parallel The user should change the path to point to his local GASS installation. Documentation about the features of GASS and the HDF-GASS design is available separately and till it is put up on the official web site, anyone interested may contact me. Test programs to read, write or append remote files have been provided in the test directory as "gass_read.c", "gass_write.c", "gass_append.c". The test programs have the ftp site to access #define-d at the top of the file which the user can change accordingly. ./src/H5Epublic. Added new error type for file close. ./src/H5F.c Added hooks for the GASS driver. ./src/H5public.h Added header files for GASS & Globus. ./src/Makefile.in Added dependancy on GASS driver in LIB_SRC. ./src/hdf5.h Included header file for GASS driver. ./src/H5FDgass.c [NEW] Routines for the GASS driver. ./src/H5FDgass.h [NEW] Header file for the GASS driver. ./test/Makefile.in Added dependancy on the gass test routines. ./test/gass_read.c File to test remote file reading using GASS. ./test/gass_write.c File to test remote file writing using GASS. ./test/gass_append.c File to test remote file appending using GASS.
* [svn-r1572] Changes since 19990810Robb Matzke1999-08-171-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5FDmulti.c [NEW] ./src/H5FDmulti.h [NEW] ./src/Makefile.in ./src/hdf5.h The split driver was reimplemented as a more general "multi" driver which is capable of splitting data into multiple files like the family driver except the partioning is done by memory usage type instead of address. The H5Pset_fapl_split() function just calls H5Pset_fapl_multi() with arguments which prepare to split the address space into two files: meta and raw data. This is the first version. I plan to allow the open() call to relax a bit which would allow one to open an hdf5 file when only the meta-data file is present. This would allow a very large file to be split and stored on tape and the relatively small meta file to be mirrored on disk to allow limited browsing of the file (any request for raw data would fail). ./src/H5private.h ./src/H5F.c ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c Added the ability for a file driver to store information in the superblock which would be needed if the file were opened again later for reading. The format is driver-defined which allows users to extend it however they like. ./doc/html/H5.format.html Added information about the new driver information block of the superblock. This is where file drivers store information they need in order to reopen the file later. ./src/H5F.c ./src/H5Fprivate.h ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5Fistore.c ./src/H5R.c The file access properties and the file access property list were decoupled, which allows the property list to more cleanly contain properties for various levels of the file and which allows the property list to be modified more cleanly when opening files. ./src/H5.c ./src/H5FDpublic.h Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never used. ./src/H5D.c Changed the way we detect the MPIO driver in all these special cases. ./src/H5F.c ./src/H5Rpublic.h ./test/tfile.c The default file sizeof(offset) was changed to be a function of haddr_t instead of hsize_t. THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES! ./src/H5F.c Fixed an uninitialized memory access bug in file closing related to the VFL. ./src/H5T.c ./src/H5Tpublic.h Added an H5T_NATIVE_HADDR predefined datatype which corresponds to the `haddr_t' type. ./test/Makefile.in Reformatted long lines. ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Removed the H5F_ACC_DEBUG flag from file creation/open calls. ./test/big.c Plugged a memory leak. ./test/h5test.c Added support for the `multi' driver. Removed #warning about not having the stdio driver. Plans are to not implement it since the sec2 driver serves the same purpose and testing didn't show any difference in execution times between the two.
* [svn-r1515] Changes since 19990715Robb Matzke1999-07-191-25/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
* [svn-r1333] Added the test_vltypes() to the other tests.Quincey Koziol1999-06-111-7/+7
|
* [svn-r1306] Changes since 19990602Robb Matzke1999-06-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./doc/html/Datatypes.html ./test/dtypes.c Added documentation and tests for opaque types. ./tools/h5ls.c Added a `-x' or `--hexdump' argument which is not fully implemented (because I want to synchronize h5tools.c first) but which will eventually print raw data in hexadecimal format without any translation from disk. This would be useful for debugging references and VL types. ./tools/h5tools.c Added support for references (not quite finished yet, but compiles -- I wanted to sync up this file before Patrick and I got too far apart...) ./src/H5R.c Checked for error return value from H5R_get_object_type() ./src/H5A.c ./src/H5D.c Changed error return values from NULL to FAIL ./test/Makefile.in ./test/trefer.c Creates trefer1.h5 and trefer2.h5 so that the second test doesn't clobber the first file since the files might be useful for debugging.
* [svn-r1217] Changes since 19990426Robb Matzke1999-04-261-55/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./examples/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Fixed some dependency problems in Makefiles. If the library version is updated then everything gets recompiled. ./src/H5G.c ./src/H5R.c Failure return value for object type functions is now H5G_UNKNOWN as documented. ./src/H5Shyper.c ./src/H5Spoint.c Fixed an unused argument warning. ./tools/h5debug.c Fixed a call to H5F_block_read() since the 4th argument is different now. ./tools/h5ls.c Added a space between the object name and class to make the output readable when the object name is longer than 24 characters. C
* [svn-r1184] Changes since 19990402Robb Matzke1999-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in Fixed so private libraries are not installed publicly. The installation directories `bin', `include', and `lib' are created mode 755. ./src/H5.c ./src/H5A.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Vprivate.h ./src/H5Z.c ./src/H5detect.c ./src/H5private.h ./test/chunk.c ./test/dsets.c ./test/dtypes.c ./test/h5test.c ./test/overhead.c ./test/ragged.c ./test/tattr.c ./tools/h5dump.c ./tools/h5findshd.c ./tools/h5ls.c Changed `__unused__' to `UNUSED' to fix a conflict with GNU header files. ./src/H5Tpkg.h ./test/h5test.h Removed __unused__ from forward function declarations. ./src/H5P.c Removed a comment about restrictions for the type conversion temporary buffers. Thanks to Quincey, the comment no longer applied. ./src/H5T.c Relaxed the H5Tpack() a little so it would pack compound data structures that had non-transient atomic members. ./tools/h5ls.c Added a `-g' (or `--group') flag that causes information to be printed about the specified group instead of the group's contents. (sort of like Unix's `ls -d'). The `-g' can be used in combination with `-r' to print information about the group and its contents.
* [svn-r1151] Changes since 19990318Robb Matzke1999-03-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
* [svn-r1149] ./configure.inRobb Matzke1999-03-181-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h Temporarily commented out the code that tries to link a simple MPI-IO application because I'm not sure how to pass $LDFLAGS and $LIBS to the compiler. Removed the `--enable-parallel=ibm' switch because the library we link with is either -lmpcc or -lmpcc_r but not both. The only way to tell is to see what compiler was specified (mpcc or mpcc_r) but if that compiler is specified then we don't need any libraries (the compiler script supplies them). That leaves just two choices: the user must use a compiler script: CC=mpcc ./configure or the user must state which library is desired: LDFLAGS='-lmpcc' ./configure --enable-parallel Checks for <setjmp.h>, longjmp(), and signal(). We don't check for setjmp() because it could be a macro (in fact, Posix requires it to be a macro) and if longjmp() is present then setjmp() is probably present too ;-) ./src/H5detect.c The alignment detection loop uses SIGBUS and setjmp/longjmp instead of fork/wait in order to get around bugs with forking in conjunction with mpich. This hasn't been tested on the SP-2 yet but it does work on the DEC Alpha. ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Changed the order that libraries are linked so -lhdf5 is always before $LDFLAGS.
* [svn-r1115] Changes since 19990302Robb Matzke1999-03-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Improvements for parallel library. If you have a properly working mpicc you should be able to just say: $ CC=mpicc ./configure and you will see checking for mpirun... /usr/local/mpi/bin/mpirun checking for parallel support files... skipped checking how to run on one processor... /usr/local/mpi/bin/mpirun -np 1 checking how to run in parallel... /usr/local/mpi/bin/mpirun -np $$NPROCS To quote from the INSTALL file.... *** Parallel vs. serial library The HDF5 library can be configured to use MPI and MPI-IO for parallelizm on a distributed multi-processor system. The easy way to do this is to have a properly installed parallel compiler (e.g., MPICH's mpicc or IBM's mpcc) and supply that executable as the value of the CC environment variable: [NOTE: mpcc is not tested yet] $ CC=mpcc ./configure $ CC=/usr/local/mpi/bin/mpicc ./configure If no such wrapper script is available then you must specify your normal C compiler along with the distribution of MPI/MPI-IO which is to be used (values other than `mpich' will be added at a later date): $ ./configure --enable-parallel=mpich If the MPI/MPI-IO include files and/or libraries cannot be found by the compiler then their directories must be given as arguments to CPPFLAGS and/or LDFLAGS: $ CPPFLAGS=-I/usr/local/mpi/include \ LDFLAGS=-L/usr/local/mpi/lib/LINUX/ch_p4 \ ./configure --enable-parallel=mpich If a parallel library is being built then configure attempts to determine how to run a parallel application on one processor and on many processors. If the compiler is mpicc and the user hasn't specified values for RUNSERIAL and RUNPARALLEL then configure chooses `mpirun' from the same directory as `mpicc': RUNSERIAL: /usr/local/mpi/bin/mpirun -np 1 RUNPARALLEL: /usr/local/mpi/bin/mpirun -np $${NPROCS:=2} The `$${NPROCS:=2}' will be substituted with the value of the NPROCS environment variable at the time `make check' is run (or the value 2). ./testpar/Makefile.in Saying `make check' (or `make test') will run the tests on two processors by default. If you define NPROCS then that many processors are used instead: $ NPROCS=4 make check ./configure.in Fixed (hopefully) bugs with detecting whether __attribute__ and __FUNCTION__ are special keywords for the compiler. ./Makefile.in Saying `make install' from the top level directory shows instructions for using shared libraries. ./config/commence.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Moved the @top_srcdir@ into the makefiles because it was expanded too early and had the wrong value. ./INSTALL Added a warning that if the wrong version of hdf4 tools are installed then `make check' will fail in the tools directory.
* [svn-r1112] Changes since 19990301Robb Matzke1999-03-021-31/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Reorganized and added some additional examples. ./MANIFEST ./aclocal.m4 [NEW] ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./bin/ltconfig [NEW] ./bin/ltmain.sh [NEW] Added tests to determine how to compile shared libraries and how to link programs with them before the libraries are installed. Also how to install and uninstall shared libraries. The configure step also prints the names of the config files it's trying to load for easier debugging. ./bin/config.guess ./bin/config.sub Replaced with a newer version from GNU. The changes we made to that file to report `irix6.x' and `FreeBSD' without version numbers have been incorporated into configure.in instead. In the future, do not change these two files (see the top of configure.in instead). By the way, this update was required to get shared libraries working. ./config/linux [REMOVED] ./config/linux-gnulibc1 [NEW] ./config/linux-gnu [NEW] ./config/alpha-dec [REMOVED] ./config/alpha-dec-osf4.0 [REMOVED] ./config/dec-osf4.x [NEW] ./config/irix5.3 [REMOVED] ./config/irix5.x [NEW] ./config/irix64 [REMOVED] ./config/freebsd Moved config files around to agree with output from the new config.guess. The linux file was split into gnu (RedHat), gnulibc1, and gnulibc2 versions. The alpha-dec file was removed (I think it was unused) and the alpha-dec-osf4.0 was changed to dec-osf4.x. The irix5.3 file renamed to irix5.x and the irix64 file was renamed to irix6.x. The freebsd file was changed to point to linux-gnulibc1. These changes were tested on: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 OSF1 4.0 ./config/alphaev56-dec-osf4.x ./config/irix64 Added warnings similar to linux/freebsd about using compilers with known bugs. ./config/commence.in ./config/conclude.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Added definitions for shared libraries. This has been tested on the following systems: Linux 2.0 Linux 2.1 FreeBSD 3.2 Irix 5.3 Irix64 6.2 Irix64 6.4 HP/UX 10.20 static only OSF1 4.0 If you want to disable use of shared libraries (you probably do for development purposes since it takes a lot longer to compile and because you have to run dynamically linked programs in a special way if the library hasn't been installed) then add `--disable-shared' to the configure command line. This is all documented in the INSTALL file. ./bin/release Temprarily commented out the MANIFEST checking when running under svf since svf is about to be replaced by a newer version. This change only affects error checking during the release process. ./Makefile.dist ./Makefile.in Added `make check' which does the same thing as `make _test' since the former is endorsed by the GNU coding style and people are used to it. The old `make _test' still works too (and so does `make test' if you use GNU make).
* [svn-r1011] Changes since 19981217Robb Matzke1999-01-071-4/+8
| | | | | | | | | | | ---------------------- ./test/dtypes.c ./test/enum.c [NEW] Added support for enumeration data types. ./test/fillval.c ./test/istore.c Fixed memory leaks during error handling.
* [svn-r949] Changes since 19981124Robb Matzke1998-11-251-18/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
* [svn-r944] Changes since 19981120Robb Matzke1998-11-231-13/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/Makefile.in ./test/shtype.c [REMOVED] Removed shtype.c because it was all commented out. Besides, these tests are done in dtypes.c now anyway. ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/unlink.c The tests that check the HDF5 API use the h5test support functions. For one thing, that means that you can specify the file driver that thay use by the HDF5_DRIVER environment variable. Possible values are: HDF5_DRIVER='sec2' Use read() and write() HDF5_DRIVER='stdio' Use fread() and fwrite() HDF5_DRIVER='core' Use malloc() and free() HDF5_DRIVER='split' Split meta and raw data HDF5_DRIVER='family N' Use file families with each member being N megabytes (N can be fractional, defaults to one). Some tests might fail for certain drivers: for instance, the mount and link tests fail for the `core' driver because they must be able to close and then reopen a file.
* [svn-r936] Changes since 19981119Robb Matzke1998-11-211-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5E.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gstab.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5Iprivate.h ./src/H5MF.c ./src/H5MM.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sselect.c ./src/H5T.c ./src/H5TB.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5V.c ./src/H5Z.c ./src/H5detect.c ./src/H5private.h Most of these changes are because the `interface_initialize_g' variable change from hbool_t to int. It's a one line change. Changed the way the library is closed so we have more control over the order the interfaces are shut down. Instead of registering an atexit() function for every interface in some haphazard order we just register one: H5_term_library() which then calls the H5*_term_interface() functions in a well-defined order. If the library is closed and then reopened repeatedly by calling H5close() and H5open() in a loop we only add one copy of the library termination functions with atexit(). Termination is a two-step process in order to help detect programming errors that would cause an infinite loop caused by the termination of one interface waking up some other previously terminated interface. The first step terminates the interface and *marks it as unusable*. After all interfaces are terminated then we mark them all as usable again. The FUNC_ENTER() macro has been modified to return failure or to dump core (depending on whether NDEBUG is defined) if we try to call an interface while it's shutting down. ./src/H5.c The H5dont_atexit() function returns failure if it's called more than once or if it's called too late. However, the error stack is not automatically printed on failure because the library might not be initialized yet ./test/chunk.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/overhead.c ./test/ragged.c Changed the extra cast for Win32 so we do floating point division again -- it was just confusion about precedence and associativity of casting and the C coercion rules. Removed extra carriage returns inserted by broken operating system. ./src/H5Ffamily.c Fixed an bug where H5F_fam_write() lowered the EOF marker for one of the family members causing H5F_fam_read() to read zeros. ./test/h5test.h [NEW] ./test/h5test.c [NEW] ./test/Makefile.in ./test/bittests.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Support library for test files. This isn't done yet but Katie's contractions are ~10 minutes apart so I figured I better back this stuff up just in case I'm not here next week... Eventually all test files will understand HDF5_DRIVER to name the low level file driver and parameters so we can easily test various drivers. They will also understand HDF5_PREFIX to prepend to the beginning of file names which is necessary for testing ROMIO with various drivers. Also, the cleanup function will know how to use the file name prefix and will understand different file driver naming schemes like file families. I'm not sure they'll understand the `gsf:' type prefixes yet. Note, the external test is completely commented out because I'm in the middle of modifying it. It will still compile and run but it doesn't test anything at the moment.
* [svn-r914] Changes since 19981113Robb Matzke1998-11-161-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/conclude.in ./test/Makefile.in ./tools/Makefile.in The Makefile $TESTS variable has finally been split into $TEST_PROGS and $TEST_SCRIPTS with the latter being the names of shell scripts that need to be run with `/bin/sh'. Now we don't have to copy each shell script before we run it. NOTE: THIS CHANGE DOES NOT AFFECT THE PABLO MAKEFILE SINCE THAT FILE IS A COPY OF A PREVIOUSLY GENERATED MAKEFILE. ./src/Makefile.in Added H5Snone.c to the source list. ./src/H5G.c Plugged a memory leak by emptying the object type "isa" table when the library is closed. ./src/H5Tconv.c ./src/H5Tpkg.h Added 48 new type functions to take advantage of hardware for integer type conversions. These functions are not registered in the conversion table yet because I haven't fully tested them. ./src/H5Tpkg.h Removed __unused__ qualifiers from prototypes.
* [svn-r907] Changes since 19981111Robb Matzke1998-11-131-50/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions about specifying a path for GNU zlib and HDF4 headers and library. Added comments for each of the tool names. Added h5toh4 as a tool name. ./configure.in ./conigure [REGENERATED] ./src/H5config.h.in [REGENERATED] The config/* scripts get invoked with $CC_BASENAME set the base name of the compiler in order to make it easier to handle setting compiler flags for different compilers in a big case statement. For instance, if $CC has the value /usr/local/mpi/bin/mpicc -ansi -64 then $CC_BASENAME will be `mpicc'. The $CC_BASENAME is not set if $CC is not set. Fixed alignment in `configure --help'. An include and/or library path can be specified for GNU zlib if configure can't find it in normal places. The "normal" means wherever your compiler normally searches, including search paths you've added through environment variables like CPPFLAGS and LDFLAGS. The INSTALL file has instructions. The `-ljpeg' library is detected. If `ssize_t' is not found then a #define is added to H5config.h similar to what we already do for `size_t'. We detect the hdf5 header file `mfhdf.h' and libraries `-lmfhdf' and `-ldf' and if found define the H5TOH4 and TESTH5TOH4 Makefile variables. The user can specify an include and/or library path. The INSTALL file has instructions. The `RUNTEST' variable has been split into `RUNSERIAL' and `RUNPARALLEL' because these are different commands. The makefile still uses `RUNTEST', which defaults to the RUNSERIAL value. The new testpar/Makefile.in sets RUNTEST to the RUNPARALLEL value. The default RUNSERIAL value is empty and the default RUNPARALLEL value is `mpirun -np 2'. These can both be overridden in the config/* files. To make the value the empty string set it like `RUNPARALLEL=none' in the config/* file. The new testpar/Makefile is generated from testpar/Makefile.in ./config/commence.in Added the RUNSERIAL and RUNPARALLEL makefile definitions. ./src/Makefile.in The `H5detect' program is run with RUNSERIAL, which is empty on all platforms except intel-osf1 (ASCI/Red) ./config/conclude.in Removed the `.c.a:' implicit rule -- we don't use it any more. ./config/BlankForm ./config/alpha-dec ./config/alpha-dec-osf4.0 ./config/freebsd2.2.7 ./config/hpux10.20 ./config/hpux9.03 ./config/intel-osf1 ./config/irix5.3 ./config/irix6.2 ./config/irix64 ./config/linux ./config/powerpc-ibm-aix4.2.1.0 ./config/rs6000-ibm-aix4.1.4.0 ./config/solaris2.5 All of these files have been updated to hande multiple compilers. Most of them assume `cc' if CC is not set. The documentation in `BlankForm' has been updated and documentation in the other files refer to `BlankForm'. The intel-osf1 uses LDFLAGS instead of LIBS to specify the extra library search paths. ./examples/Makefile.in ./test/Makefile.in ./tools/Makefile.in Simplified by grouping some dependency information together more succinctly. The tools Makefile.in has been modified to work with the `h5toh4' and `testh5toh4' programs. Until Paul checks these in you may have problems compiling. If so, just create files h5toh4.c and testh5toh4.c that contain: #include <stdio.h> int main(int argc, char *argv[]) { fprintf(stderr, "%s: not implemented\n", argv[0]); return 1; } ./src/H5public.h Removed definition for `ssize_t' since this is now handled by configure in H5config.h with a #define. ./MANIFEST ./testpar/Makefile.in [NEW] Added a makefile for parallel tests. As soon as we get this working properly we can remove the other four makefiles in that directory and maintain just one.
* [svn-r789] Changes since 19981023Robb Matzke1998-10-261-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./test/Makefile.in ./test/flush1.c [NEW] ./test/flush2.c [NEW] Test to see if calling H5Fflush() results in a consistent file. ./src/H5.c ./src/H5A.c ./src/H5D.c ./src/H5Fistore.c ./src/H5I.c ./src/H5S.c ./src/H5Shyper.c ./src/H5Sselect.c ./src/H5TB.c Changed comparisons against SUCCEED and FAIL to >=0 and <0 in about 15 places. ./src/H5.c ./src/H5V.c ./src/H5detect.c ./src/H5private.h ./src/H5public.h ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/external.c ./test/fillval.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Removed ^M from the end of lines inserted on broken OS's ;-) ./src/H5private.h Changed c++ comments to c comments. ./src/H5R.c Added tracing macros.
* [svn-r761] Changes since 19981013Robb Matzke1998-10-141-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c Fixed a signed vs. unsigned comparison. ./src/H5D.c Setting a fill value of all zeros will cause the fill value to be written to the dataset instead of relying on the low-level file driver initializing unwritten areas with zero. ./src/H5D.c ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5O.c ./src/H5T.c More file mounting stuff. ./src/H5I.c Fixed a bug where trying to close an invalid object id caused a core dump. For instance, H5Gclose(-1). ./MANIFEST ./test/Makefile.in ./test/mount.c [NEW] Mounting tests. ./src/H5R.c Fixed a couple (herr_t)NULL casts.
* [svn-r758] Added test code for object references.Quincey Koziol1998-10-131-4/+4
|
* [svn-r735] Changes since 19981002Robb Matzke1998-10-051-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5D.c Fill values are working for contiguous datasets now except there are two things that need more support from the data space layer, specifically the ability to form a selection from the difference of two selections. They are (1) extending an external contiguous dataset, (2) optimization by delaying the fill until after the first H5Dwrite(). Renamed H5D_allocate() to H5D_init_storage() since allocation is only part of the story. Added a data space argument so it doesn't have to query the space from the object header -- the space is always available in the caller anyway. Removed `#ifdef HAVE_PARALLEL' from a few places where it wasn't necessary. We don't need it around code that doesn't compile anything from mpi.h or mpio.h. ./src/H5Fistore.c Uncommented H5F_istore_alloc() for non-parallel and moved the `#ifdef HAVE_PARALLEL' just around Kim's barrier. ./src/H5Fmpio.c Wrapped a couple long lines. Got rid of two signed vs. unsigned comparison warnings. ./MANIFEST ./test/Makefile.in ./test/fillval.c [NEW] Added tests for fill values. The contiguous dataset extend test is disabled until H5S_SELECT_DIFF is implemented. ./tools/Makefile.in Fixed a bug where `make test' didn't build the executables first. This should cause the snapshots to start up again. ./Makefile.in Changed to build in `test' directory before `tools' directory. We want the library tests to pass before we even start considering the tools. You can still build and/or test the tools independent of the library tests passing.
* [svn-r730] Changes since 19980928Robb Matzke1998-09-301-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name. Added a few missing files. Are all of these supposed to be distributed? ./tools/testfiles/h5dumptst.c + ./tools/testfiles/tall-1.ddl + ./tools/testfiles/tall-2.ddl + ./tools/testfiles/tall-3.ddl ./tools/testfiles/tall.ddl ./tools/testfiles/tall.h5 + ./tools/testfiles/tattr-1.ddl + ./tools/testfiles/tattr-2.ddl + ./tools/testfiles/tattr-3.ddl + ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tattr.ddl ./tools/testfiles/tattr.h5 + ./tools/testfiles/tdset-1.ddl + ./tools/testfiles/tdset-2.ddl + ./tools/testfiles/tdset-3.ddl + ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tdset.ddl ./tools/testfiles/tdset.h5 + ./tools/testfiles/tgroup-1.ddl + ./tools/testfiles/tgroup-2.ddl + ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tgroup.ddl ./tools/testfiles/tgroup.h5 + ./tools/testfiles/tslink-1.ddl + ./tools/testfiles/tslink-2.ddl ./tools/testfiles/tslink.ddl ./tools/testfiles/tslink.h5 ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Gstab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/istore.c Implemented split ratios as documented in previous e-mails. Frank, the new API functions are H5Pget_btree_ratios() and H5Pset_btree_ratios(). ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h Added more type checking for the data transfer property list passed to these functions. ./src/H5D.c Added a dataset transfer property list as an argument to H5D_allocate() for the parallel version in order to pass split ratios down to H5F_istore_lock(). Eventually we won't need the split ratios for H5D_allocate() because we'll build a completely full B-tree from the leaves up, but it might be useful to have other transfer properties at that level anyway. I always caled H5D_allocate() with &H5D_dflt_xfer. ./MANIFEST ./test/Makefile.in ./test/overhead.c [NEW] Added an `overhead' test run by `make timings'.
generated by cgit v0.12 at 2024-11-08 20:59:04 (GMT)