summaryrefslogtreecommitdiffstats
path: root/test/big.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r5219] Purpose:Quincey Koziol2002-04-221-2/+4
| | | | | | | | | | Code cleanup Description: Clean up warnings from gcc 3.1 Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5207] Purpose:Albert Cheng2002-04-191-30/+46
| | | | | | | | | | Feature Description: Added option -c to allow skipping file system Checking. This allows users to run the test even if the program thinks it may fill up the file system. Platforms tested: eirene
* [svn-r5205] Purpose:Albert Cheng2002-04-191-1/+1
| | | | | | | | | | | | | | Code cleanup Description: Platform dependent code related to the struct stat and fstat calls polluted source codes. Hard to maintain. Solution: Platform dependent code are moved to H5private.h and then internal code can #include H5private.h. Repeat those macro definition for the stdio and multi drivers since they area examples for writing a virtual file driver. They must not use any internal code. Platforms tested: eirene (parallel), modi4 (serial including gass driver.)
* [svn-r5200] Purpose:Quincey Koziol2002-04-181-1/+1
| | | | | | | | | | Code Cleanup Description: Clean up compiler warnings from the last bunch of checkins Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r5113] Purpose:Albert Cheng2002-03-281-8/+74
| | | | | | | | | | | | | | | feature Description: Added -fsize <fsize> option which controls the family file size used. This can be used to test the file size limits of a machine or file system. Platforms tested: modi4 (passed even 20GB file size). Eirene (started to fail when 2GB is used. Expected since linux 2.2 does not support large than 2GB file size.) burrwhite (passed up to 4GB. Expected since Linux 2.4 supports larger than 2GB file size.) Then it failed at 4GB and beyond. This is probably a bug in the family file driver.
* [svn-r4568] Purpose:Quincey Koziol2001-10-231-2/+2
| | | | | | | | | | | | | | | | | Code cleanup Description: I had moved an fclose() in my earlier fix and it could lead to a resource leak in certain error conditions. Also, prepared file for Albert to expand to test with files larger than 2GB... :-) Solution: Moved fclose() call back to original position. Put in type cast for FAMILY_SIZE macro. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4564] Purpose:Quincey Koziol2001-10-231-2/+3
| | | | | | | | | | | | Bug fix Description: 'big' test was not detecting that the AFS quota had been hit when running under FreeBSD. Solution: Amending quota checking code to detect errors on file closes as well as opens, seeks and writes. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4312] Purpose:Quincey Koziol2001-08-061-8/+0
| | | | | | | | | Feature shift Description: Take out the v1.2.x compatibility stubs and put in the hooks for v1.4.x compatibility when needed. Platforms tested: FreeBSD 4.3 (hawkwind)
* [svn-r3770] Purpose:Bill Wendling2001-04-031-1/+1
| | | | | | | | | | | | | | | | | Update Description: Changed includes of the form: #include <hdf5_file.h> to #include "hdf5_file.h" so that gcc can pick them up easier without including the system header files since we don't care about them. Platforms tested: Linux
* [svn-r3326] Purpose:Quincey Koziol2001-01-251-1/+1
| | | | | | | | | | | Clean up warnings Description: The "FAILED" macro is defined by Windows and is causing warnings and potential errors when compiled on that platform. Solution: Change our macro from FAILED to H5_FAILED. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r3252] Purpose:Quincey Koziol2001-01-091-3/+3
| | | | | | | | | | | | | Code cleanup. Description: Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the extra warnings. Including a few show-stoppers for compression on IRIX machines. Solution: Changed lots of variables' types to more sensible and consistent types, more range-checking, more variable typecasts, etc. Platforms tested: FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
* [svn-r3005] Purpose:Quincey Koziol2000-11-271-0/+8
| | | | | | | | Backward compatibility code Description: Add in code to allow the library to emulate the v1.2 API and behavior. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2866] Purpose:Quincey Koziol2000-11-111-1/+1
| | | | | | | | Code cleanup Description: Found more "Have_foo" usage and converted them to "H5_HAVE_foo" Platforms tested: FreeBSD 4.1.1 (hawkwind)
* [svn-r2531] Description:Albert Cheng2000-09-101-5/+5
| | | | | | | | | | | | | | | | | | | The "FILENAME" declared extern in h5test.h is not always used. It was used in h5_cleanup to remove temporary files created during tests. Not all tests codes have used this routine. Indeed, quite a few of test programs do "#define FILENAME ". Also, h5_cleanup needs to work in tandem with h5_fixname. h5_fixname accepts an explicite base_name argument instead of using the global variable FILENAME. That is cleaner. Solution: Added char *base_name[] as a new argument to h5_cleanup, in the same style as h5_fixname. Removed "extern char *FILENAME..." from use. Also, undo some unnecessary declaration of "char *FILENAME" from some tests which don't use it at all (yet). Platforms tested: modi4-64(irix64), arabica(solari2.7), eirene(linux) (arabica could not launch tests automatically. I had to hack in LD_LIBRARY_PATH to make them run.)
* [svn-r2463] Fixed a comparison between unsigned and signed value. Cast both toBill Wendling2000-08-041-1/+1
| | | | unsigned long. Hope this is enough :).
* [svn-r2073] Added free-list code to the library and took out the older ↵Quincey Koziol2000-04-041-4/+4
| | | | | | | "temporary buffer" code, since the functionality was superceded. See the followup document for details on the free-list code.
* [svn-r1832] * 1999-11-16Robb Matzke1999-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ** configure.in ** configure [REGENERATED] ** src/H5private.h ** src/H5public.h ** src/Makefile.in Generates an H5pubconf.h file which is just like H5config.h except all the preprocessor symbols have `H5_' prepended. This was done so that the configuration results can be used in public header files without polluting the namespace. ** src/H5.c Added H5I_REFERENCE and H5I_VFL to the API tracing code so their names are printed instead of just numbers. ** src/H5FDstdio.c ** tools/h5import.c ** tools/h5repart.c ** tools/pdb2hdf.c Changed to use the `H5_' versions of configure results since these files include only the public API. ** test/big.c Removed a compiler warning. ** test/h5test.c Removed unused code.
* [svn-r1572] Changes since 19990810Robb Matzke1999-08-171-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./src/H5FDmulti.c [NEW] ./src/H5FDmulti.h [NEW] ./src/Makefile.in ./src/hdf5.h The split driver was reimplemented as a more general "multi" driver which is capable of splitting data into multiple files like the family driver except the partioning is done by memory usage type instead of address. The H5Pset_fapl_split() function just calls H5Pset_fapl_multi() with arguments which prepare to split the address space into two files: meta and raw data. This is the first version. I plan to allow the open() call to relax a bit which would allow one to open an hdf5 file when only the meta-data file is present. This would allow a very large file to be split and stored on tape and the relatively small meta file to be mirrored on disk to allow limited browsing of the file (any request for raw data would fail). ./src/H5private.h ./src/H5F.c ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c Added the ability for a file driver to store information in the superblock which would be needed if the file were opened again later for reading. The format is driver-defined which allows users to extend it however they like. ./doc/html/H5.format.html Added information about the new driver information block of the superblock. This is where file drivers store information they need in order to reopen the file later. ./src/H5F.c ./src/H5Fprivate.h ./src/H5FD.c ./src/H5FDprivate.h ./src/H5FDpublic.h ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5Fistore.c ./src/H5R.c The file access properties and the file access property list were decoupled, which allows the property list to more cleanly contain properties for various levels of the file and which allows the property list to be modified more cleanly when opening files. ./src/H5.c ./src/H5FDpublic.h Removed H5FD_MEM_META and H5FD_MEM_GROUP since they're never used. ./src/H5D.c Changed the way we detect the MPIO driver in all these special cases. ./src/H5F.c ./src/H5Rpublic.h ./test/tfile.c The default file sizeof(offset) was changed to be a function of haddr_t instead of hsize_t. THE H5RPUBLIC.H DEFINITIONS WILL HAVE PROBLEMS IF THE USER CREATES A FILE WITH NON-DEFAULT OFFSET AND SIZE SIZES! ./src/H5F.c Fixed an uninitialized memory access bug in file closing related to the VFL. ./src/H5T.c ./src/H5Tpublic.h Added an H5T_NATIVE_HADDR predefined datatype which corresponds to the `haddr_t' type. ./test/Makefile.in Reformatted long lines. ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c Removed the H5F_ACC_DEBUG flag from file creation/open calls. ./test/big.c Plugged a memory leak. ./test/h5test.c Added support for the `multi' driver. Removed #warning about not having the stdio driver. Plans are to not implement it since the sec2 driver serves the same purpose and testing didn't show any difference in execution times between the two.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1507] Uncommented VL datatypes in compound datatypes test, since it's ↵Quincey Koziol1999-07-181-0/+1
| | | | | | working now. Some other memory leaks in the tests fixed.
* [svn-r1101] Changes since 19990219Robb Matzke1999-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/irix64 The old (-32) compiler is now supported by setting envrionment CC='cc -32'. The -64 compiler is the default or you can set CC='cc -64'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5G.c ./src/H5I.c ./src/H5Ocomp.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Z.c ./src/H5detect.c ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/enum.c ./test/mtime.c ./test/ohdr.c ./tools/h5ls.c Fixed lots of warnings on Irix64. Mailed a few remaining warnings in H5S to Quincey and a few in the dumper to Ruey-Hsia.
* [svn-r949] Changes since 19981124Robb Matzke1998-11-251-100/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
* [svn-r929] Changes since 19981119Robb Matzke1998-11-191-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./test/flush2.c ./test/overhead.c Removed carriage-returns inserted by a broken operating system. ./test/big.c ./test/mtime.c ./test/ragged.c ./tools/h5ls.c Removed inclusion of <H5config.h>, system header files, and definition of __unused__ since this all happens in <H5private.h>. ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/overhead.c ./test/shtype.c ./test/unlink.c ./tools/h5import.c ./tools/h5repart.c Removed inclusion of <H5config.h> since <hdf5.h> includes it. ./test/flush1.c Includes <stdlib.h>, protects inclusion of <unistd.h> by using HAVE_UNISTD_H instead of STDC_HEADERS.
* [svn-r928] Changes since 19981118Robb Matzke1998-11-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c ./src/H5Smpio.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpublic.h ./src/H5detect.c ./src/H5private.h ./src/H5public.h ./test/big.c The `long long' type isn't quite as prevalent as we had hoped; there is at least one system that defines `__int64' but not `long long'. Therefore, I've temporarily changed all occurrences of `long long' to `long_long' and then #define that in H5private.h based on the existence of `long long' or `__int64'. This gets rid of some #ifdef's in other parts of the code. The semantics of the hdf5 types are: *int8_t Exactly one byte *int16_t At least two bytes. We favor 32-bit integers over 16-bit integers if the 16-bit integer is 4-bytes wide (Cray) *int32_t At least four bytes. *int64_t At least eight bytes long_long The widest integral integer type The H5Smpio.c contains debugging code which is non-portable. ./tools/h5ls.c Changed the order native types are detected so we favor the name `int' over `short' or `long' if two of them are the same. ./config/conclude.in Added a rule to make test programs depend on the hdf5 library. This fixes a minor bug where changing H5detect.c and then running `make test' caused H5Tinit.c to not be recompiled and therefore the test files are not relinked.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r916] Problem:Albert Cheng1998-11-161-1/+7
| | | | | | | | | | | | | In machine (e.g. O2K) where long long and long are the same sizes, it ended up defining GB8LL as 1 which is way too small for the dataset size. Solution: Add an entry to define GB8LL if long can hold it. When all fails, define GB8LL as 0. During runtime, enough_room() will detect this special value and skips the test. Platform tested: O2K IRIX64.
* [svn-r859] Changes since 19981030Robb Matzke1998-11-021-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Added new Pablo files HDF5record_RT.h and ProcIDs.h ./acconfig.h ./configure [REGENERATED] ./configure.in ./src/H5.c ./src/H5Vprivate.h ./src/H5config.h.in [REGENERATED] ./src/H5private.h ./src/H5public.h ./test/big.c Added more configuration stuff for the Win32 environment. Removed all the #ifdef WIN32 from the source and replaced them with OS-independent stuff. Specifics follow: Check for non-Posix.1 `st_blocks' field in `struct stat' which is used by the big file test to decide if the file system supports holes. If the st_blocks field isn't present then we just skip the test. Configure checks for <io.h> <sys/resource.h> <sys/time.h> and <winsock.h> and defines HAVE_IO_H, HAVE_SYS_RESOURCE_H, HAVE_SYS_TIME_H and HAVE_WINSOCK_H when they're found. Configure checks whether both <sys/time.h> and <time.h> can be included and defines SYS_TIME_WITH_TIME if so. Otherwise include only <sys/time.h> or <time.h> even if both exist. Configure checks sizeof(__int64) and defines SIZEOF___INT64 to the result or to zero if __int64 isn't defined. The source uses `long long' in preference to `__int64'. Removed null WIN32 definition for `inline' since such a definition already exists in H5config.h Protected gettimeofday() calls in debugging code with HAVE_GETTIMEOFDAY instead of WIN32. ./src/H5F.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fstdio.h ./src/H5P.c ./src/H5Tconv.c ./src/H5private.h Removed #include of system files from library source files and consolodated them into H5private.h where they're protected by various configuration macros (most of them were duplicated there already anyway). ./test/big.c ./test/chunk.c ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/fillval.c ./test/flush1.c ./test/flush2.c ./test/iopipe.c ./test/links.c ./test/mount.c ./test/mtime.c ./test/overhead.c ./test/ragged.c ./test/shtype.c ./test/unlink.c Protected system #include's with #ifdef's from H5config.h. Undefined NDEBUG since some of the tests rely on assert() to check return values. Removed WIN32 definitions for __unused__ since this can be controlled by the definition of HAVE_ATTRIBUTE in H5config.h ./test/testhdf5.h Removed the CLEAN_CMD definition because we no longer use it. Albert's cleanup() functions replaced it. ./test/fillval.c Initialized auto hid_t variables to fix warnings in error recovery code when data flow analysis is turned on in compilers. ./test/h5tools.c Initialized an auto variable to fix a compiler warning. ./test/chunk.c ./test/ragged.c The WIN32 had some unsigned variables changed to signed because the compiler generates warnings when coercing unsigned to double(?). I changed them back to unsigned because they really are unsigned quantities. If this the change was just to shut up extraneous warnings then perhaps a compiler flag can do the same; otherwise if the compiler generates bad code then we should supply a patch file instead messing up source code with bug work-arounds. ./src/H5detect.c Protected system #include's with #ifdef's from H5config.h thereby removing a WIN32. If getpwuid() doesn't exist (HAVE_GETPWUID) then we assume that `struct passwd' doesn't exist either (we don't really need it in that case). The H5T_NATIVE_LLONG and H5T_NATIVE_ULLONG are defined in terms of `long long' or else `__int64' or else `long' depending on what's available. ./src/H5Flow.c ./src/H5Ofill.c Added __unused__ to some function arguments that aren't used when assertions are turned off. ./src/H5V.c Changed an auto variable name in some hand-inlined code to get rid of a warning about the variable shadowing a previous auto.
* [svn-r781] Windows NT port-tested on Unix and NTPatrick Lu1998-10-231-1/+8
| | | | | changes: defined __unused__ as nothing, other little changes. all changes are surrounded by #if defined(WIN32)
* [svn-r745] Changes since 19981002Robb Matzke1998-10-081-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./doc/html/H5.format.html ./src/H5HG.c Fixed a bug in the global heap that caused H5HG_read() to write past the end of the buffer in certain cases. ./test/big.c The test is skipped if hdf5 was configured with `--disable-hsizet'. ./src/H5Ofill.c Data type conversions are implemented for the fill value. ./src/H5.c Tracing prints one of H5P_FILE_CREATE, H5P_FILE_ACCESS, H5P_DATASET_CREATE, H5P_DATASET_XFER, or H5P_MOUNT instead of the more cryptic H5I_TEMPLATE_* constants. ./src/H5D.c Removed prototype for H5D_find_name(). ./src/H5I.c The GROUP_MASK and ID_MASK are both calculated from GROUP_BITS instead of being set by hand. We don't use the sign bit of hid_t; all valid hid_t values are positive so we can say things like `if ((file=H5Fopen(...))<0)'. Changed `(int)pow(2.0,x)' to `1<<x' so we don't have to worry about rounding. Fixed H5I_get_type() so it doesn't always fail an assertion. ./src/H5E.c ./src/H5Epublic.h Added minor error H5E_MOUNT ./src/H5F.c ./src/H5Fprivate.h Added H5Fmount() and H5Funmount(). Mounting and unmounting works as documented but some of the other things aren't implemented yet, the biggest being current working groups always acting on the root of the mount tree, and H5Fclose() closing the entire tree. The rest of the stuff will be added shortly... ./src/H5P.c ./src/H5Ppublic.h Added the H5P_MOUNT property list but haven't implemented any particular properties for it yet. ./src/H5Gstab.c Hard links across files return an error instead of failing an assertion.
* [svn-r635] Changes since 19980831Robb Matzke1998-08-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in Running `make distclean' will not fail if one of the subdirectories has already been cleaned. ./config/BlankForm ./config/irix5.3 Cleaned it up more. Added better support/documentation for systems that have more than one compiler. ./config/alpha-dec-osf4.0 [NEW] Added a new config file as a result of testing on Jim Reus's machine. ./test/chunk.c Scaled down the testing range so we can actually run it interactively. ./tools/h5import.c Included <unistd.h> to get rid of warning for close(). ./src/H5detect.c Seg-faults on Linux for some reason when NDEBUG is defined, so I just undef it at the top of the source. ./test/big.c Added a fflush(). ./tools/h5ls.c The `-d' flag now works even when `-v' isn't specified. ./examples/h5_chunk_read.c ./examples/h5_compound.c ./examples/h5_extend_write.c ./examples/h5_group.c ./examples/h5_read.c ./examples/h5_write.c Indented according to hdf5 standards. Fixed compiler warnings
* [svn-r579] Changes since 19980806Robb Matzke1998-08-061-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/solaris2.5 Hopefully set up now so it honors the CC and CFLAGS variables and understands solaris cc flags. ./test/big.c Checks to see if creating lots of large sparse files exceeds the user disk quota and skips the test. It also checks that we can actually open ~64 files at once. ./doc/html/Files.html ./src/H5A.c ./src/H5Aprivate.h ./src/H5F.c ./src/H5Fpublic.h Added the H5Fflush() function which takes any object as an argument as long as the object is in some way associated with a file. This required an H5A_entof() ./src/H5.c ./src/H5Flow.c The `%a' format of HDfprintf() now allows a field width and justification flag etc, like the other formats. The old H5F_addr_print() was recoded to call HDfprintf() instead of vice versa.
* [svn-r511] Changes since 19980715Robb Matzke1998-07-151-54/+189
| | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fsplit.c Changed the allocation size request from `size_t' to `hsize_t' because it was overflowing for the `big' test. ./src/H5detect.c If `long double' and `double' are the same size then we define H5T_NATIVE_LDOUBLE to be the same as H5T_NATIVE_DOUBLE. Similarly for `long' vs. `long long' and `unsigned long' vs. `unsigned long long'. ./test/Makefile.in Added `big' to the list of tests to normally run. ./test/big.c Added a check to see if the file system supports holes and if it doesn't then the test is skipped.
* [svn-r452] Changed tests to use the new dataspace API calls. Still need to ↵Quincey Koziol1998-07-061-2/+2
| | | | | | add tests for point selections and strides.
* [svn-r400] Changes since 19980513Robb Matzke1998-05-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Datasets.html Fixed a couple of typos. ./src/H5.c Added the `Z' modifier to HDfprintf() for `size_t' sizes. Use it like this: HDfprintf(stderr,"size is %Zd\n", (size_t)x); ./src/H5AC.c ./src/H5F.c ./src/H5Fprivate.h The maximum number of meta data objects that can be cached can be set from the application (but the library might not honor it every time; it's a hint). ./src/H5D.c Changed a warning message so it's not so alarming. ./src/H5Fistore.c Chunks can be cached. ./src/H5O.c ./src/H5Oprivate.h Added H5O_copy() and H5O_free() to copy and free messages. ./src/H5P.c ./src/H5Ppublic.h Added H5Pset_cache() and H5Pget_cache() and changed lots of "template" to "property list". ./src/H5Z.c ./src/H5Zpublic.h Miscellaneous little things to clean up. Mostly just removed H5Z_MAXVAL and added H5Z_USERDEF_MIN and H5Z_USERDEF_MAX. ./MANIFEST ./test/Makefile.in ./test/chunk.c [NEW] Added a performance test for chunk caching. It looks at the amount of I/O instead of timing because timing is partly dependent on the chunk size and I wanted a measurement that was a function of only the cache size. Run `chunk' with no arguments and then say `gnuplot x-gnuplot' to see the plots (press return between plots). Postscript files are created for each plot. ./test/big.c ./test/cmpd_dset.c ./test/extend.c ./test/external.c ./test/gheap.c Added H5F_ACC_DEBUG so we can see cache performance statistics.
* [svn-r398] Changes since 19980501Robb Matzke1998-05-131-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5Bprivate.h ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5Gpkg.h ./src/H5MF.c ./src/H5P.c ./src/H5Ppublic.h ./test/big.c ./html/Big.html ./html/Files.html Family members can now be any size >1kB. Got rid of some places where we were reading a property list after it was closed. ./MANIFEST ./src/Makefile.in ./src/h5repart.c A program to repartition file families. The source and/or destination may be files or file families. Examples: testhdf5 -c -o stab h5repart -m 1m tstab2.h5 x%05d.h5 h5repart -m 100k x%05d.h5 y%05d.h5 h5repart y%05d.h5 z.h5 diff tstab2.h5 z.h5 ./src/h5ls.c Added a usage message, replaced assertions with error messages. ./config/linux Made a warning message more obvious. Added better optimization flags for Pentium-Pro's.
* [svn-r383] ./src/H5A.cRobb Matzke1998-05-011-0/+3
| | | | | | | | | | | | | | | | | ./src/H5F.c ./src/H5G.c ./src/H5O.c ./src/H5Osdspace.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Z.c ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/istore.c Now that I have a home-grown version of Purify I fixed all the leaks in all the test files.
* [svn-r346] Changes since 19980410Robb Matzke1998-04-141-10/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/H5.format.html ./src/H5E.c ./src/H5Epublic.h ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gprivate.h ./src/h5ls.c ./test/Makefile.in Symbolic links are now supported. The ./test/links program will create a `links.h5' file that demonstrates hard links, soft links, dangling links, and recursive links. A symbolic link is a symbol table entity and doesn't have an object header. It's format is described in H5.format.hml. ./src/H5G.c ./src/H5Gpublic.h ./src/h5ls.c Implemented H5Gstat() and H5Gget_linkval() as documented by Quincey. The `H5G_type_t type' field of `H5G_stat_t' was changed to `int type' because H5G_type_t was already used and the `type' data type should be open-ended. ./src/H5Ffamily.c Removed an incorrect diagnostic message. ./test/big.c Added read/write calls to test partial I/O to big contiguous datasets. With no arguments it writes to a dataset and prints the list of points written which should be redirected to a file. With an argument (the name of a file containing the stdout of a run with no arguments) values are read from the dataset. One would typically say `big >x && big x'.
* [svn-r339] Changes since 19980408Robb Matzke1998-04-091-0/+63
---------------------- ./src/H5Osdspace.c ./html/H5.format.html In the past we were allowed to have >2GB files on a 32-bit machine as long as no dataset within the file was larger than 4GB (or whatever sizeof(size_t) is). That's been fixed now. All dataset size calculations are done with `hsize_t' which is normally defined as `unsigned long long'. ./src/H5F.c ./src/H5Ffamily.c ./src/H5Fprivate.h ./src/H5P.c ./src/H5Ppublic.h The file family member size can now be set/queried. The default is still 64MB, but it can be set to 1GB by saying: H5Pset_family (plist, 30, H5P_DEFAULT); When opening an existing file family the specified bits-per-member is ignored and the first member of the family determines the bits-per-member, which can be retrieved with H5Pget_family(). ./acconfig.h ./configure.in ./src/H5config.h ./src/H5public.h Added `--disable-hsizet' so that those with old GCC compilers (<2.8.1) can still compile the code. ./src/H5.c ./src/H5private.h Added HDfprintf() which works just like fprintf() except you can give `H' as a size modifier for the integer conversions and supply an `hsize_t' or `hssize_t' argument without casting it. For instance: hsize_t npoints = H5Sget_npoints(space); HDfprintf(stdout,"Dataset has %Hd (%#018Hx) points\n", npoints, npoints); You can now give `%a' as a format to print an address, but all formating flags are ignored and it causes the return value of HDfprintf() to not include the characters in the address (but who uses the return value anyway :-). Example: H5G_t *grp; HDfprintf(stdout, "Group object header at %a\n", &(grp->ent.header)); Added HDstrtoll() which works exactly like [HD]strtol() except the result is an int64. ./src/debug.c Large addresses can now be entered from the command-line. Use either decimal, octal (leading `0') or hexadecimal (leading `0x') when giving the address. ./src/h5ls.c The printf format for dataset dimensions was changed to `%Hu' to support large datasets. ./test/big.c [NEW] A test for big datasets on 32-bit machines. This test is not run by default. Don't try to run it on an nfs-mounted file system or other file system that doesn't support holes because it creates two 32GB datasets of all zero.
generated by cgit v0.12 at 2024-12-12 14:03:59 (GMT)