summaryrefslogtreecommitdiffstats
path: root/test/istore.c
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r12833] Description:Quincey Koziol2006-10-311-15/+15
| | | | | | | | Clean up more warnings... Tested on: Linux/32 2.6 (chicago) Linux/64 2.6 (chicago2)
* [svn-r12519] Fixed "make check-vfd"James Laird2006-07-311-111/+122
| | | | | | | | | | "make check-vfd" will now run all tests in the test directory with different file drivers (at least, all of those tests that use the testing framework's FAPL). Tests that fail will be skipped. This is not a perfect fix, but is better than nothing. Along with this change, check-vfd should be added to the Daily Tests.
* [svn-r11245] Purpose:Quincey Koziol2005-08-131-2/+2
| | | | | | | | | | | | | | | | | | | | Code cleanup Description: Trim trailing whitespace, which is making 'diff'ing the two branches difficult. Solution: Ran this script in each directory: foreach f (*.[ch] *.cpp) sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f end Platforms tested: FreeBSD 4.11 (sleipnir) Too minor to require h5committest
* [svn-r9727] Purpose:Quincey Koziol2004-12-291-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-) Description: Generally speaking, this is the "signed->unsigned" change to selections. However, in the process of merging code back, things got stickier and stickier until I ended up doing a big "sync the two branches up" operation. So... I brought back all the "infrastructure" fixes from the development branch to the release branch (which I think were actually making some improvement in performance) as well as fixed several bugs which had been fixed in one branch, but not the other. I've also tagged the repository before making this checkin with the label "before_signed_unsigned_changes". Platforms tested: FreeBSD 4.10 (sleipnir) w/parallel & fphdf5 FreeBSD 4.10 (sleipnir) w/threadsafe FreeBSD 4.10 (sleipnir) w/backward compatibility Solaris 2.7 (arabica) w/"purify options" Solaris 2.8 (sol) w/FORTRAN & C++ AIX 5.x (copper) w/parallel & FORTRAN IRIX64 6.5 (modi4) w/FORTRAN Linux 2.4 (heping) w/FORTRAN & C++ Misc. update:
* [svn-r9155] Purpose:Quincey Koziol2004-08-251-7/+7
| | | | | | | | | | | | | | | Bug fix (sorta) Description: Change reading of "missing" chunks from datasets with undefined fill values to not overwrite the application buffer with random garbage from memory. Note that this is almost the same, since whatever garbage the application had in those locations will still be there... Platforms tested: FreeBSD 4.10 (sleipnir) IRIX64 6.5 (modi4) h5committested
* [svn-r8383] Purpose:Quincey Koziol2004-04-181-4/+4
| | | | | | | | | | | | | Code cleanup Description: Clean up lots of warnings based on those reported from the SGI compilers as well as gcc. Platforms tested: SGI O3900, IRIX64 6.5 (Cheryl's SGI machine) FreeBSD 4.9 (sleipnir) w/ & w/o parallel h5committest
* [svn-r7829] Purpose:Quincey Koziol2003-11-081-13/+12
| | | | | | | | | | | | | | | | | Bug fix & code cleanup Description: Allowing the library to call malloc with a size of 0 bytes causes problems for some users, so we check for allocations of 0 bytes and disallow them now. Cleaned up some code which could call malloc with 0 size. Changed some code calling HDmalloc directly to call H5MM_malloc(), which allows us to check for 0 sized allocations. Platforms tested: FreeBSD 4.9 (sleipnir) too minor to require h5committest
* [svn-r7827] Purpose:Quincey Koziol2003-11-081-0/+4
| | | | | | | | | | | | Bug fix Description: Make --disable-hsizet work properly again by fixing a couple of tests and correcting the definition of SSIZET_MAX. Platforms tested: FreeBSD 4.9 (sleipnir) h5committest not used, as it doesn't test this configuration.
* [svn-r6938] Purpose:Quincey Koziol2003-05-311-2/+2
| | | | | | | | | | Code cleanup Description: Remove redundant "Testing" from test output. Platforms tested: h5committestted (although Fortran tests failed for some reason)
* [svn-r6914] Elena Pourmal2003-05-221-1/+1
| | | | | | | | | | | | | | | | Purpose: Maintenance and bug fixes and test of latest szip library.. Description: Recently Quincey enabled MEDIUM test for istore. That caused daily tests to fail on verbena. It looks like that test creates a pretty big file, and afs write fails. Test passes when run in /tmp. Solution: Disable MEDIUM test and filed bug report to investigate the problem little bit more carefully. Platforms tested: verbena, arabica, arabica-64 (since I also tested newest szip) Misc. update:
* [svn-r6892] Purpose:Quincey Koziol2003-05-171-9/+4
| | | | | | | | | | | Code cleanup Description: Uncomment tests that we previously commented out with my "Uncomment tests!" note. Platforms tested: h5committested
* [svn-r6825] Purpose:Quincey Koziol2003-05-071-160/+197
| | | | | | | | | | | | | | | | | | | | | | | | | New feature/enhancement Description: Chunked datasets are handled poorly in several circumstances involving certain selections and chunks that are too large for the chunk cache and/or chunks with filters, causing the chunk to be read from disk multiple times. Solution: Rearrange raw data I/O infrastructure to handle chunked datasets in a much more friendly way by creating a selection in memory and on disk for each chunk in a chunked dataset and performing all of the I/O on that chunk at one time. There are still some scalability (the current code attempts to create a selection for all the chunks in the dataset, instead of just the chunks that are accessed, requiring portions of the istore.c and fillval.c tests to be commented out) and performance issues, but checking this in will allow the changes to be tested by a much wider audience while I address the remaining issues. Platforms tested: h5committested, FreeBSD 4.8 (sleipnir) serial & parallel, Linux 2.4 (eirene)
* [svn-r6411] Purpose:Quincey Koziol2003-02-171-8/+19
| | | | | | | | | | | | | | | | | | | | | | Code cleanup Description: Clean up miscellaneous warnings which have crept into the code. Fix "_POSIX_C_SOURCE not defined" warning on FreeBSD. Adjust gcc compiler flags to be more concise for production mode. Refactor the H5O code so that there is a stronger boundary between code in the H5O package and code in the library which just calls H5O routines. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} FreeBSD 4.7 (sleipnir) serial & parallel and gcc 2.95.4 & gcc 3.2.2 Misc. update: Update MANIFEST if you add or remove any file.
* [svn-r6387] Purpose:Quincey Koziol2003-02-101-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bug Fix Description: Metadata cache in parallel I/O can cause hangs in applications which perform independent I/O on chunked datasets, because the metadata cache can attempt to flush out dirty metadata from only a single process, instead of collectively from all processes. Solution: Pass a dataset transfer property list down from every API function which could possibly trigger metadata I/O. Then, split the metadata cache into two sets of entries to allow dirty metadata to be set aside when a hash table collision occurs during independent I/O. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} FreeBSD 4.7 (sleipnir) serial & parallel Misc. update: Updated release_docs/RELEASE
* [svn-r6252] Purpose:Quincey Koziol2003-01-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lots of performance improvements & a couple new internal API interfaces. Description: Performance Improvements: - Cached file offset & length sizes in shared file struct, to avoid constantly looking them up in the FCPL. - Generic property improvements: - Added "revision" number to generic property classes to speed up comparisons. - Changed method of storing properties from using a hash-table to the TBBT routines in the library. - Share the propery names between classes and the lists derived from them. - Removed redundant 'def_value' buffer from each property. - Switching code to use a "copy on write" strategy for properties in each list, where the properties in each list are shared with the properties in the class, until a property's value is changed in a list. - Fixed error in layout code which was allocating too many buffers. - Redefined public macros of the form (H5open()/H5check, <variable>) internally to only be (<variable>), avoiding innumerable useless calls to H5open() and H5check_version(). - Reuse already zeroed buffers in H5F_contig_fill instead of constantly re-zeroing them. - Don't write fill values if writing entire dataset. - Use gettimeofday() system call instead of time() system when checking the modification time of a dataset. - Added reference counted string API and use it for tracking the names of objects opening in a file (for the ID->name code). - Removed redundant H5P_get() calls in B-tree routines. - Redefine H5T datatype macros internally to the library, to avoid calling H5check redundantly. - Keep dataspace information for dataset locally instead of reading from disk each time. Added new module to track open objects in a file, to allow this (which will be useful eventually for some FPH5 metadata caching issues). - Remove H5AC_find macro which was inlining metadata cache lookups, and call function instead. - Remove redundant memset() calls from H5G_namei() routine. - Remove redundant checking of object type when locating objects in metadata cache and rely on the address only. - Create default dataset object to use when default dataset creation property list is used to create datasets, bypassing querying for all the property list values. - Use default I/O vector size when performing raw data with the default dataset transfer property list, instead of querying for I/O vector size. - Remove H5P_DEFAULT internally to the library, replacing it with more specific default property list based on the type of property list needed. - Remove redundant memset() calls in object header message (H5O*) routines. - Remove redunant memset() calls in data I/O routines. - Split free-list allocation routines into malloc() and calloc()- like routines, instead of one combined routine. - Remove lots of indirection in H5O*() routines. - Simplify metadata cache entry comparison routine (used when flushing entire cache out). - Only enable metadata cache statistics when H5AC_DEBUG is turned on, instead of always tracking them. - Simplify address comparison macro (H5F_addr_eq). - Remove redundant metadata cache entry protections during dataset creation by protecting the object header once and making all the modifications necessary for the dataset creation before unprotecting it. - Reduce # of "number of element in extent" computations performed by computing and storing the value during dataspace creation. - Simplify checking for group location's file information, when file has not been involving in file-mounting operations. - Use binary encoding for modification time, instead of ASCII. - Hoist H5HL_peek calls (to get information in a local heap) out of loops in many group routine. - Use static variable for iterators of selections, instead of dynamically allocation them each time. - Lookup & insert new entries in one step, avoiding traversing group's B-tree twice. - Fixed memory leak in H5Gget_objname_idx() routine (tangential to performance improvements, but fixed along the way). - Use free-list for reference counted strings. - Don't bother copying object names into cached group entries, since they are re-created when an object is opened. The benchmark I used to measure these results created several thousand small (2K) datasets in a file and wrote out the data for them. This is Elena's "regular.c" benchmark. These changes resulted in approximately ~4.3x speedup of the development branch when compared to the previous code in the development branch and ~1.4x speedup compared to the release branch. Additionally, these changes reduce the total memory used (code and data) by the development branch by ~800KB, bringing the development branch back into the same ballpark as the release branch. I'll send out a more detailed description of the benchmark results as a followup note. New internal API routines: Added "reference counted strings" API for tracking strings that get used by multiple owners without duplicating the strings. Added "ternary search tree" API for text->object mappings. Platforms tested: Tested h5committest {arabica (fortran), eirene (fortran, C++) modi4 (parallel, fortran)} Other platforms/configurations tested? FreeBSD 4.7 (sleipnir) serial & parallel Solaris 2.6 (baldric) serial
* [svn-r5895] Purpose:Quincey Koziol2002-08-271-1/+2
| | | | | | | | | | | | Code cleanup/More tests Description: Cleaned up some compiler warnings and wrote additional tests for space allocation and storage size routines. Platforms tested: FreeBSD 4.6 (sleipnir) w/serial & parallel. Will be testing on IRIX64 6.5 (modi4) in serial & parallel shortly.
* [svn-r5468] Purpose:Quincey Koziol2002-05-281-0/+1
| | | | | | | | | | Code cleanup. Description: Included H5Eprivate.h for a couple of tests which needed it... Platforms tested: IRIX64 6.5 (modi4)
* [svn-r5260] Purpose:Quincey Koziol2002-04-251-4/+20
| | | | | | | | | | | | | | | | Code cleanup Description: Previously, the I/O pipeline (pline), external file list (efl) and fill- value (fill) structs were passed down the raw data function call chain, even into and/or through functions which didn't use them. Since all three of these pieces of information are available from the dataset creation property list, just pass the dataset creation property list down the function call chain and query for the information needed in a particular function. Platforms tested: FreeBSD 4.5 (sleipnir)
* [svn-r4355] Purpose:Quincey Koziol2001-08-141-7/+7
| | | | | | | | | | | | | | | | | | | | | | Code cleanup (sorta) Description: When the first versions of the HDF5 library were designed, I remembered vividly the difficulties of porting code from a 32-bit platform to a 16-bit platform and asked that people use intn & uintn instead of int & unsigned int, respectively. However, in hindsight, this was overkill and unnecessary since we weren't going to be porting the HDF5 library to 16-bit architectures. Currently, the extra uintn & intn typedefs are causing problems for users who'd like to include both the HDF5 and HDF4 header files in one source module (like Kent's h4toh5 library). Solution: Changed the uintn & intn's to unsigned and int's respectively. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4324] Purpose:Quincey Koziol2001-08-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | New Features! Description: Start migrating the internal use of property lists in the library from the older implementation to the new generic property lists. Currently, only the dataset transfer property lists are migrated to the new architecture, all the rest of the property list types are still using the older architecture. Also, the backward compatibility features are not implemented yet, so applications which use dataset transfer properties may need to make the following changes: H5Pcreate(H5P_DATASET_XFER) -> H5Pcreate_list(H5P_DATASET_XFER_NEW) and H5Pclose(<a dataset transfer property list>) -> H5Pclose_list(id) This still may have some bugs in it, especially with Fortran, but I should be wrapping up those later today. Platforms tested: FreeBSD 4.4 (hawkwind)
* [svn-r4312] Purpose:Quincey Koziol2001-08-061-4/+0
| | | | | | | | | Feature shift Description: Take out the v1.2.x compatibility stubs and put in the hooks for v1.4.x compatibility when needed. Platforms tested: FreeBSD 4.3 (hawkwind)
* [svn-r3770] Purpose:Bill Wendling2001-04-031-10/+10
| | | | | | | | | | | | | | | | | Update Description: Changed includes of the form: #include <hdf5_file.h> to #include "hdf5_file.h" so that gcc can pick them up easier without including the system header files since we don't care about them. Platforms tested: Linux
* [svn-r3326] Purpose:Quincey Koziol2001-01-251-12/+12
| | | | | | | | | | | Clean up warnings Description: The "FAILED" macro is defined by Windows and is causing warnings and potential errors when compiled on that platform. Solution: Change our macro from FAILED to H5_FAILED. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r3252] Purpose:Quincey Koziol2001-01-091-14/+14
| | | | | | | | | | | | | Code cleanup. Description: Fixed _lots_ (I mean _tons_) of warnings spit out by the gcc with the extra warnings. Including a few show-stoppers for compression on IRIX machines. Solution: Changed lots of variables' types to more sensible and consistent types, more range-checking, more variable typecasts, etc. Platforms tested: FreeBSD 4.2 (hawkwind), IRIX64-64 (modi4)
* [svn-r3018] Purpose:Quincey Koziol2000-11-291-1/+1
| | | | | | | | | | | Bug fix Description: Had incorrect logic in testing for file families when v1.2 compatibility was enabled.. Solution: Corrected to match non-compatibility code. Platforms tested: Linux 2.2.16-3smp (eirene)
* [svn-r3005] Purpose:Quincey Koziol2000-11-271-0/+4
| | | | | | | | Backward compatibility code Description: Add in code to allow the library to emulate the v1.2 API and behavior. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2653] Purpose:Quincey Koziol2000-10-101-1/+3
| | | | | | | | | No change. Description: Must've added some debuging printf's and then took them out in a way which triggered CVS. Platforms tested: Solaris 2.6 (baldric) & FreeBSD 4.1.1 (hawkwind)
* [svn-r2531] Description:Albert Cheng2000-09-101-1/+1
| | | | | | | | | | | | | | | | | | | The "FILENAME" declared extern in h5test.h is not always used. It was used in h5_cleanup to remove temporary files created during tests. Not all tests codes have used this routine. Indeed, quite a few of test programs do "#define FILENAME ". Also, h5_cleanup needs to work in tandem with h5_fixname. h5_fixname accepts an explicite base_name argument instead of using the global variable FILENAME. That is cleaner. Solution: Added char *base_name[] as a new argument to h5_cleanup, in the same style as h5_fixname. Removed "extern char *FILENAME..." from use. Also, undo some unnecessary declaration of "char *FILENAME" from some tests which don't use it at all (yet). Platforms tested: modi4-64(irix64), arabica(solari2.7), eirene(linux) (arabica could not launch tests automatically. I had to hack in LD_LIBRARY_PATH to make them run.)
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-101-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1548] Changes since 19990727Robb Matzke1999-07-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5.c [1.3] ./src/H5AC.c [1.3] ./src/H5ACprivate.h [1.3] ./src/H5B.c [1.3] ./src/H5Bprivate.h [1.3] ./src/H5D.c [1.3] ./src/H5F.c [1.3] ./src/H5Farray.c [1.3] ./src/H5Fcore.c [1.3] ./src/H5Ffamily.c [1.3] ./src/H5Fistore.c [1.3] ./src/H5Flow.c [1.3] ./src/H5Fmpio.c [1.3] ./src/H5Fprivate.h [1.3] ./src/H5Fsec2.c [1.3] ./src/H5Fsplit.c [1.3] ./src/H5Fstdio.c [1.3] ./src/H5G.c [1.3] ./src/H5Gent.c [1.3] ./src/H5Gnode.c [1.3] ./src/H5Gprivate.h [1.3] ./src/H5Gstab.c [1.3] ./src/H5HG.c [1.3] ./src/H5HGprivate.h [1.3] ./src/H5HL.c [1.3] ./src/H5HLprivate.h [1.3] ./src/H5MF.c [1.3] ./src/H5MFprivate.h [1.3] ./src/H5O.c [1.3] ./src/H5Oattr.c [1.3] ./src/H5Ocont.c [1.3] ./src/H5Odtype.c [1.3] ./src/H5Oefl.c [1.3] ./src/H5Olayout.c [1.3] ./src/H5Oprivate.h [1.3] ./src/H5Oshared.c [1.3] ./src/H5Ostab.c [1.3] ./src/H5P.c [1.3] ./src/H5R.c [1.3] ./src/H5Smpio.c [1.3] ./src/H5T.c [1.3] ./src/H5Tvlen.c [1.3] ./src/H5private.h [1.3] ./test/dtypes.c [1.3] ./test/gheap.c [1.3] ./test/istore.c [1.3] ./test/lheap.c [1.3] ./test/ohdr.c [1.3] ./tools/h5debug.c [1.3] File addresses (the `haddr_t' type) are passed by value instead of by reference. The type is no longer a struct. This is one of the preliminary changes needed for the Virtual File Layer stuff. ./src/H5Fprivate.h [1.3] ./src/H5Flow.c [1.3] Some address functions were rewritten as macros.
* [svn-r1204] Changes since 19990415Robb Matzke1999-04-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/depend.in Fixed automatic dependencies. We were storing dependencies for *.o files instead of *.lo files after shared libraries were added. ./config/gnu-flags ./config/linux-gnulibc1 Moved `-march=pentiumpro -mcpu=pentiumpro -malign-double' from the linux file to this file and caused it to depend on the CPU name. This fixes one of Elena's bugs. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5P.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Tpublic.h ./test/istore.c Added an H5Dget_storage_size() function that reports the amount of storage allocated for raw data in a dataset. Changed H5D_xfer_* to H5F_xfer_* because these properties are more general than datasets. This also allows some of the lower-level I/O functions to get this information easier. ./src/H5S.c ./src/H5Sall.c Added two new functions H5S_all_read() and H5S_all_write() which are optimizations that copy data directly between file and memory without having to go through the scatter gather step. This knocks quite a bit of time off the I/O and reading/writing entire datasets is a fairly common operation. ./tools/h5ls.c Reports the logical size of data, the allocated size of data, and the percent utilization. ./MANIFEST Removed old pablo files, added new files. Snapshots should now start to work again. ./src/H5D.c ./src/H5Fmpio.c Removed two warnings signed vs. unsigned comparisons and check for overflow.
* [svn-r1110] Changes since 19990226Robb Matzke1999-03-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL Added instructions for using other compilers on Irix platforms. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h The presence of <sys/sysinfo.h> and <sys/proc.h> is only checked on DEC/Alpha because there are too many problems including these headers on other systems. ./config/irix6.x ./config/irix64 Removed `-ansi' and added a comment. Converting an ASCII UTC date and time to a time_t value is not defined by ANSI or Posix but is available if we don't use `-ansi'. This allows the dataset modification time messages to be read properly by H5Gget_objinfo(). ./src/H5Tconv.c Fixed a compiler warning. ./test/dtypes.c ./test/hyperslab.c ./test/istore.c Fixed compiler warnings in printf() statements.
* [svn-r1011] Changes since 19981217Robb Matzke1999-01-071-0/+1
| | | | | | | | | | | ---------------------- ./test/dtypes.c ./test/enum.c [NEW] Added support for enumeration data types. ./test/fillval.c ./test/istore.c Fixed memory leaks during error handling.
* [svn-r949] Changes since 19981124Robb Matzke1998-11-251-196/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5T.c Fixed a typo in the registration of the `unsigned char' to `unsigned long long' type conversion that caused it to not be registered, falling back to software whenever that conversion path was taken. ./MANIFEST ./test/Makefile.in ./test/testhdf5.c ./test/testhdf5.h ./test/theap.c [REMOVED] ./test/lheap.c [NEW] ./test/tohdr.c [REMOVED] ./test/ohdr.c [NEW] ./test/tstab.c [REMOVED] ./test/stab.c [NEW] Removed the `t' from the front of these names and made each test a stand-alone program following the format of most of the other tests. ./test/big.c Uses libh5test.a but always sets the low-level driver to 1GB file family. The `#if' near the top to set the data space to 8GB has been simplified now that `long_long' is always defined and the error message is improved when `long_long' isn't wide enough. Cleanup code was added to the error handling. ./test/gheap.c ./test/istore.c Uses libh5test.a. Added error cleanup code. ./test/dtypes.c ./test/h5test.c Added 68 new tests that check hardware and software conversions between `long long' and `unsigned long long' and the other integer types. The tests only run on machines where sizeof(long_long)!=sizeof(long). We test a total of 180 different integer conversions, half in hardware and half in software. Cut down the number of times each test is run from 5 to 1 so it doesn't take so long. If you want to run more times there's a constant that can be changed at the top of the file. ./test/extend.c Removed unused variable. ./test/h5test.c ./test/h5test.h ./test/external.c ./test/fillval.c The h5_cleanup() returns true/false so it can be used in an `if' statement to clean up additional files. ./doc/html/Environment.html Indented. Added HDF5_PREFIX and HDF5_DRIVER descriptions. ./src/H5P.c Changed the trace type for the second argument from `Iu' to `x' since it's an output parameter. ./INSTALL Added a warning that the GNU zlib that comes with the latest version of HDF4 is too old to use with HDF5 and must be renamed so configure doesn't see it when `--enable-hdf4' is used.
* [svn-r925] Changes since 19981116Robb Matzke1998-11-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./INSTALL.parallel [NEW] We're beginning to unify some of the parallel installation steps. This file will contain general information for installing the parallel library. It's not complete yet. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] Check for xdr_int() in libnsl required on Solaris when linking with hdf4. It's found on the Irix system I tested which complains that `-lnsl' didn't resolve any symbols. Oh well. Fixed the order of searching for libdf and libmfhdf for hdf4 linking. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5Z.c Check for compress() in libz in order to find older versions of the library that will still work for hdf4. Added a separate check for compress2() that hdf5 will use. ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5.c ./src/H5private.h ./src/H5A.c ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fmpio.c ./src/H5Fprivate.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Ofill.c ./src/H5Olayout.c ./src/H5Omtime.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5R.c ./src/H5RA.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Snone.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/H5Sselect.c ./src/H5T.c ./src/H5Tbit.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./test/bittests.c ./test/gheap.c ./test/hyperslab.c ./test/istore.c ./test/tmeta.c ./test/trefer.c ./test/tselect.c ./tools/h5debug.c ./tools/h5tols.c Added checks for Posix.1g types like `int8_t'. If not defined then H5private.h defines them. Changed all `int8' etc. to `int8_t'. ./src/H5A.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5I.c ./src/H5P.c ./src/H5R.c ./src/H5RA.c ./src/H5S.c ./src/H5T.c ./src/H5TB.c ./src/H5Z.c Calling H5*_term_interface() resets interface_initialize_g to FALSE so a subsequent call to H5open() (implied or explicit) reinitializes global variables properly. ./src/H5private.h ./src/H5Oefl.c ./src/H5S.c Changed MAX_SIZET, MAX_SSIZET, MAX_HSIZET, and MAX_HSSIZET to SIZET_MAX, SSIZET_MAX, HSIZET_MAX, and HSSIZE_MAX to they match the Posix.1 constants in <limits.h>. ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5detect.c Added 36 more integer hardware conversion functions to the type conversion table for conversions to/from `long long' and `unsigned long long'. The `long long' names will be changed shortly to make them portable to Win32. Changed H5T_init() to H5T_native_open() and added an H5T_native_close() to open and close the predefined native data types. Increased the initial size of the type conversion table from 64 to 128 entries. Reordered the 90 new integer conversion functions so the names that are printed favor `int' over `short' or `long' when two of them are the same. ./test/dtypes.c Added hardware and software integer conversion tests for the 56 functions I added recently but not the additional 36 checked in this time. That will come next. Call H5close() after each test so type conversion statistics are easier to follow. Try this: $ HDF5_DEBUG=t ./dtypes Added more debugging output for when things go wrong. ./src/H5private.h Removed trailing carriage-returns inserted by broken operating system ;-)
* [svn-r753] Changes since 19981008Robb Matzke1998-10-131-2/+2
| | | | | | | | | | | | | | | | | | ---------------------- ./src/H5F.c ./src/H5Fprivate.h ./src/H5G.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5Gpublic.h ./test/istore.c ./test/tstab.c Removed CWG functionality. ./tools/Makefile.in Added `_test' where I added `test' last week. Maybe now the snapshots will start up again...
* [svn-r733] Robb Matzke1998-10-011-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes since 19980930 ---------------------- ./MANIFEST ./doc/html/H5.format.html ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5O.c ./src/H5Ofill.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./src/Makefile.in Added fill values as documented in previous e-mails. They only work for chunked datasets so far. ./src/H5E.c ./src/H5Epublic.h ./src/H5P.c Changed H5E_TEMPLATE to H5E_PLIST. ./src/H5Omtime.c ./src/H5V.c Fixed a typo in a comment. ./src/H5Tconv.c Fixed a bug in compound type conversions that caused an assertion to fail.
* [svn-r730] Changes since 19980928Robb Matzke1998-09-301-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST Changed freebsd2.2.1 to freebsd2.2.7 to match change in file name. Added a few missing files. Are all of these supposed to be distributed? ./tools/testfiles/h5dumptst.c + ./tools/testfiles/tall-1.ddl + ./tools/testfiles/tall-2.ddl + ./tools/testfiles/tall-3.ddl ./tools/testfiles/tall.ddl ./tools/testfiles/tall.h5 + ./tools/testfiles/tattr-1.ddl + ./tools/testfiles/tattr-2.ddl + ./tools/testfiles/tattr-3.ddl + ./tools/testfiles/tattr-4.ddl ./tools/testfiles/tattr.ddl ./tools/testfiles/tattr.h5 + ./tools/testfiles/tdset-1.ddl + ./tools/testfiles/tdset-2.ddl + ./tools/testfiles/tdset-3.ddl + ./tools/testfiles/tdset-4.ddl ./tools/testfiles/tdset.ddl ./tools/testfiles/tdset.h5 + ./tools/testfiles/tgroup-1.ddl + ./tools/testfiles/tgroup-2.ddl + ./tools/testfiles/tgroup-3.ddl ./tools/testfiles/tgroup.ddl ./tools/testfiles/tgroup.h5 + ./tools/testfiles/tslink-1.ddl + ./tools/testfiles/tslink-2.ddl ./tools/testfiles/tslink.ddl ./tools/testfiles/tslink.h5 ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dprivate.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Gstab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/istore.c Implemented split ratios as documented in previous e-mails. Frank, the new API functions are H5Pget_btree_ratios() and H5Pset_btree_ratios(). ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Spoint.c ./src/H5Sprivate.h Added more type checking for the data transfer property list passed to these functions. ./src/H5D.c Added a dataset transfer property list as an argument to H5D_allocate() for the parallel version in order to pass split ratios down to H5F_istore_lock(). Eventually we won't need the split ratios for H5D_allocate() because we'll build a completely full B-tree from the leaves up, but it might be useful to have other transfer properties at that level anyway. I always caled H5D_allocate() with &H5D_dflt_xfer. ./MANIFEST ./test/Makefile.in ./test/overhead.c [NEW] Added an `overhead' test run by `make timings'.
* [svn-r633] Changes since 19980828Robb Matzke1998-08-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./RELEASE Updated with important changes I made since the second beta. ./src/H5A.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5G.c ./src/H5Gprivate.h ./src/H5R.c ./src/H5Rprivate.h ./src/H5T.c ./src/H5Tprivate.h Any API function that used to take an `hid_t loc_id' followed by a `const char *name' can now take any type of object for the loc_id as long as the object is somehow associated with a file. Internally, H5G_loc() was modified to return an H5G_entry_t* instead of an H5G_t* so it's more general. Among other things, this allows one to retrieve information about an object like a named type or dataset without knowing the name of the type or dataset: int get_nlinks (hid_t obj) { H5G_stat_t sb; if (H5Gstat(obj, ".", TRUE, &sb)<0) return -1; return sb.nlink; } ./test/gheap.c ./test/istore.c These files needed a couple of changes because they call some of the internal functions whose H5G_t arguments changed to H5G_entry_t. ./src/H5A.c Got rid of all the switch statements for getting symbol table entries for varous objects and replaced them with a call to H5G_loc() allowing attributes to automatically apply to any type of object that belongs to a file. ./test/Makefile.in Moved the ragged array tests from the normal list of tests to the `make timings' target. ./test/ragged.c Added rewrite tests -- rewrite the rows of a dataset changing the number of rows and the length of each row. ./test/mtime.c Added a test that checks that H5Gstat() can be called with a dataset as the first argument. ./src/H5S.c Added #ifdef HAVE_PARALLEL around code to check for the HDF5_MPI_OPT_TYPES environment variable because the global variable that gets set is #ifdef'd. ./bin/release bzip2 uses .bz2 as the file extension.
* [svn-r435] ./INSTALLRobb Matzke1998-06-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./INSTALL_MAINT ./README ./RELEASE Partially updated for second alpha, but haven't updated version numbers yet. ./src/H5.c ./src/H5A.c ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Fmpio.c ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5I.c ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oattr.c ./src/H5Ocomp.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5T.c ./src/H5Tconv.c ./src/H5detect.c ./test/hyperslab.c ./test/istore.c Changed memory allocation functions so they fail instead of dumping core. The `x' was removed from the name to remind us of that: H5MM_xmalloc() -> H5MM_malloc(), etc. H5MM_calloc() takes one argument like H5MM_malloc() instead of two like calloc() because we almost always called it with `1' for one of the arguments anyway. The only difference between the two functions is that H5MM_calloc() returns memory which is initialized to zero. ./src/H5Gent.c ./src/H5Gprivate.h Removed H5G_ent_calloc() since it wasn't used. ./src/H5Fistore.c Fixed a bug found by Albert. Thanks, Albert! This fix combined with the changes to memory allocation prevent the library from failing an assertion if the application uses an unreasonable size for chunks (like Alberts 10000x10000x4). ./src/H5MF.c ./src/H5MFprivate.h Changed H5MF_free() to H5MF_xfree() since calling it with an undefined address is allowed.
* [svn-r412] Updated with the newly added data transfer mode.Albert Cheng1998-06-071-4/+4
|
* [svn-r410] Changes since 19980604Robb Matzke1998-06-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5A.c Named data types can have attributes. Fixed bugs where the API functions didn't check the return values of their internal counterparts and thus the automatic error reporting didn't work. Fixed some places where the error stack wasn't cleared after a function returned failure. Data types returned by H5Aget_type() are always read-only. If the `attr_num' argument of H5Aiterate() is null then it acts like H5Giterate() instead of failing -- it begins processing attributes with the first one. ./src/H5D.c We check for allocation overruns when scalar datasets are stored in external files. ./src/H5O.c H5O_modify() will fail if the message is >=16kB. ./src/H5Oattr.c Split some long lines ./src/H5T.c ./src/H5Tprivate.h Added H5T_entof() to support attributes on named types. ./src/h5ls.c Prints the names of attributes and their sizes. ./test/cmpd_dset.c ./test/dsets.c ./test/dtypes.c ./test/extend.c ./test/external.c ./test/gheap.c ./test/istore.c ./test/links.c ./test/shtype.c If the environment variable HDF5_NOCLEANUP is defined then the temporary files are not removed. The testhdf5 program still has the bug that it removes *.h5, clobbering test files from other programs... oh well. ./test/dtypes.c Added attribute tests.
* [svn-r402] Added cleanup function that removes all temporary test files whenAlbert Cheng1998-05-281-0/+21
| | | | | the tests pass. Should add a "noclean" option that allows the temporary to stay around even when the tests pass.
* [svn-r383] ./src/H5A.cRobb Matzke1998-05-011-0/+1
| | | | | | | | | | | | | | | | | ./src/H5F.c ./src/H5G.c ./src/H5O.c ./src/H5Osdspace.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Z.c ./test/big.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/istore.c Now that I have a home-grown version of Purify I fixed all the leaks in all the test files.
* [svn-r377] Changes since 19980424Robb Matzke1998-04-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5A.c ./src/H5T.c Fixed memory leaks. More to come later but PureAtria doesn't make a Linux version of purify and the free version doesn't compile with the new SMP Linux kernels so I had to debug over the internet on a day that Sprint seemed to be having routing problems... oh well. I got rid of most of the leaks. ./src/H5Apublic.h Includes H5Ipublic.h for types in the header file. ./src/H5O.c Comments improved for H5O_read() ./test/tattr.c Removed a non-ANSI empty initializer. ./test/dsets.c Include <string.h> ./test/istore.c Fixed a non-ANSI pointer conversion.
* [svn-r353] Changes since 19980414Robb Matzke1998-04-171-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./html/Compression.html [NEW] ./html/Datasets.html ./html/H5.format.html ./html/H5.user.html Documented compression. A couple of the H5P functions aren't quite implemented yet but they're coming soon... ./src/H5Dprivate.h ./src/H5E.c ./src/H5Epublic.h ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocomp.c [NEW] ./src/H5Oprivate.h ./src/H5P.c ./src/H5Ppublic.h ./src/H5Sprivate.h ./src/H5Ssimp.c ./src/H5Z.c [NEW] ./src/H5Zprivate.h [NEW] ./src/H5Zpublic.h [NEW] ./src/Makefile.in ./src/hdf5.h ./test/dsets.c ./test/istore.c Compression is now mostly working. Don't try to open a compressed dataset though because the compression message won't be read. ./html/Datatypes.html ./html/H5.api.html ./src/H5.c ./src/H5private.h ./src/H5D.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5Tprivate.h ./src/H5Tpublic.h Added timing support. When compiled with H5T_DEBUG defined the library will print conversion bandwidths when the library closes. The H5Tregister functions take a string as the first argument so the statistics output is meaningful. ./MANIFEST Added new files. ./configure.in ./src/H5config.h.in Check for getrusage(). Check for compress2() in libz.a and the zlib.h header file. Added `z' to the debug list. ./src/H5B.c ./src/H5Bprivate.h ./src/H5Gnode.c ./src/debug.c Cleaned up some indentation and added support to print istore B-trees. From the debugger, give the B-tree address and the dimensionality from the layout message of the object header. ./src/h5ls.c The oid is printed as w:x:y:z where w and x are the file ID and y and z are the OID within the file. You can give z or y*2^32+z as an argument to the debugger to print the object header for the object. ./src/H5AC.c Cleaned up statistics and made them match those reported by H5T and H5Z. ./src/H5MM.c ./src/H5MMprivate.h ./src/H5Fistore.c Finally got rid of a couple of long-standing const cast warnings.
* [svn-r338] Changes since 19980407Robb Matzke1998-04-081-381/+386
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5D.c ./src/H5Dprivate.h ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fsplit.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5MF.c ./src/H5MFprivate.h ./src/H5O.c ./src/H5Ocont.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Olayout.c ./src/H5Oname.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5S.c ./src/H5Sprivate.h ./src/H5Spublic.h ./src/H5Ssimp.c ./src/H5Tconv.c ./src/H5Tpkg.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5private.h ./src/H5public.h ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/extend.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tfile.c ./test/th5s.c Anything having to do with the size of a dataset now uses the types `hsize_t' and `hssize_t' which must be the same size and at least as large as `size_t'. This isn't fully tested yet, so hsize_t and hssize_t are defined as size_t and ssize_t in H5public.h. Setting them to larger values will trip up gcc versions less than 2.8.1 on x86 platforms. Documented unused function formals with `__unused__' before the formal name. This also has the effect of supressing warning messages for gcc since it's defined to be `__attribute__((unused))' in the H5private.h file. ./src/debug.c ./src/h5ls.c If the file name contains a `%' then the file is opened as a file family with H5P_DEFAULT for the file member access property list. ./src/h5ls.c The group name is optional, defaulting to `/'. ./src/hdf5.h Added some missing public header files.
* [svn-r337] Changes since 19980403Robb Matzke1998-04-071-26/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./configure.in Moved setting of compiler warning switches earlier in the file. Turned on more warning switches to gcc. ./config/linux Prints a warning if the gcc version is less than 2.8.1 since that version has problems with register allocation for `long long'. ./html/Datatypes.html Documented sharing of data types between datasets. ./src/H5G.c ./src/H5Gpublic.h Implemented H5Gmove(), H5Glink() and H5Gunlink() for hard links. Still have soft links to do. ./src/H5AC.c ./src/H5ACprivate.h ./src/H5D.c ./src/H5E.c ./src/H5Eprivate.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fcore.c ./src/H5Ffamily.c ./src/H5Fistore.c ./src/H5Flow.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Fsec2.c ./src/H5Fstdio.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gprivate.h ./src/H5HG.c ./src/H5HL.c ./src/H5HLprivate.h ./src/H5I.c ./src/H5Iprivate.h ./src/H5MM.c ./src/H5MMprivate.h ./src/H5O.c ./src/H5Oefl.c ./src/H5Oprivate.h ./src/H5Osdspace.c ./src/H5Oshared.c ./src/H5Ostab.c ./src/H5P.c ./src/H5S.c ./src/H5Ssimp.c ./src/H5T.c ./src/H5Tconv.c ./src/H5Tprivate.h ./src/H5Tpublic.h ./src/H5V.c ./src/H5Vprivate.h ./src/H5detect.c ./src/h5ls.c ./test/cmpd_dset.c ./test/dsets.c ./test/external.c ./test/hyperslab.c ./test/iopipe.c ./test/istore.c ./test/shtype.c ./test/tstab.c Fixed comparisons between signed and unsigned values. Fixed warnings about unused function arguments.
* [svn-r329] Changes since 19980324Robb Matzke1998-03-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5D.c Zero element requests for H5Dread() and H5Dwrite() succeed. ./src/H5F.c ./src/H5Fprivate.h All files will have a root group. This greatly simplifies the library at the expense of ~1k extra bytes in files that have only one object. ./src/H5D.c ./src/H5Dprivate.h ./html/Groups.html Functions that used to take a file ID and an object name can now take a group ID instead of a file ID. This doesn't change the API, only it's documentation. ./src/H5G.c ./src/H5Gprivate.h ./src/H5O.c ./src/H5Oprivate.h Removed extra file arguments from some internal functions since the file pointer can be found from the group pointer or a symbol table entry (ent->file or H5G_fileof(group)). Besides, when we eventually implement mounting one file on another, H5G_namei() might return a different file than what you gave it, and that file is part of the returned symbol table entry. ./src/H5G.c Fixed bug with `.' appearing in a name. It used to hang the library. ./src/Makefile.in ./src/h5ls.c [NEW] ./MANIFEST Added `h5ls' a simple program that takes a file name and a directory and lists the contents of that directory using H5Giterate(). ./test/istore.c Changed an argument to H5G_create(). ./test/tstab.c Removed test_1 which was testing that files with a single object don't have a root group. This no longer applies.
* [svn-r328] Changes since 19980318Robb Matzke1998-03-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./src/H5B.c ./src/H5Bprivate.h ./src/H5G.c ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5Gpublic.h ./src/H5Gstab.c Implemented H5Giterate(). However, since most functions can't take a group ID in place of a file ID yet, there's not a whole lot that the operator can do besides print the name or something. ./test/H5O.c Fixed writing of four uninitialized bytes to the file as part of an object header. ./test/istore.c For some reason, `mpirun -np 1 istore' results in extra arguments on the command line that istore doesn't understand. I'm probably forgetting to call some MPI function in main(). Albert, Kim? So I commented out the `exit(1)' for the time being.
generated by cgit v0.12 at 2024-11-17 12:54:11 (GMT)