summaryrefslogtreecommitdiffstats
path: root/testpar
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r18919] Add $(TEST_PROG) and *.0 to CHECK_CLEANFILES and remove / ↵Larry Knox2010-05-271-7/+7
| | | | | | between ${DESTDIR} and @prefix@ in config/commence.am. This gets propagated to Makefile.in and removes all the program and object files from the examples directories when make check-clean is run. Tested amani, jam, linew, CYGWIN
* [svn-r18836] Added code to config files, libhdf5.settings.in and ↵Larry Knox2010-05-171-0/+2
| | | | | | configure.in to add compiler version information for fortran and C++ in the settings file and the configure output for our common compilers on linux, solaris, and mac(gnu only). Tested: amani, jam, linew (h5committest) and with configure on these machines and tejeda.
* [svn-r18779] Add ${DESTDIR} to scripts and Makefiles so that make ↵Larry Knox2010-05-121-5/+5
| | | | | | DESTDIR=<install directory> install, installcheck and uninstall is supported for installing examples, since they are now installed as part of make install. This was necessary for rpmbuilds, but should also be supported otherwise. Tested: amani, jam, linew with committest, rpmbuild on jam and amani.
* [svn-r18773] Add files to support building library with CMakeAllen Byrne2010-05-121-0/+46
| | | | Tested: Local linux
* [svn-r18769] Description:Quincey Koziol2010-05-121-2/+2
| | | | | | | | | | | Bring r18768 from trunk to 1.8 branch: Correct a mis-merged patch when marking an entry dirty. Tested on: FreeBSD/32 6.3 (duty) in debug mode Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode (h5committested on trunk)
* [svn-r18741] Description:Quincey Koziol2010-05-071-8/+7
| | | | | | | | | | | | | | Bring r18740 from trunk to 1.8 branch: Bring r18738 from metadata journaling 'merging' branch to trunk: Switch H5AC_resize_pinned_entry() to work on protected entries as well, and rename to H5AC_resize_entry() Tested on: FreeBSD/32 6.3 (duty) in debug mode FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode (h5committested on trunk)
* [svn-r18726] Description:Quincey Koziol2010-05-061-36/+36
| | | | | | | | | | | | Bring r18725 from trunk to 1.8 branch: Bring r18724 from metadata journaling 'merging' branch to trunk: Rename H5[A]C_rename to H5[A]C_move_entry. Tested on: FreeBSD/32 6.3 (duty) w/debug (h5committested on trunk)
* [svn-r18722] Description:Quincey Koziol2010-05-061-88/+22
| | | | | | | | | | | | | | | Bring r18721 from trunk to 1.8 branch: Bring r18720 from metadata journaling merging branch to trunk: Bring changes from metadata journaling branch to 'merging' branch: Rename H5[A]C_mark_pinned_or_protected_entry_dirty() to H5[A]C_mark_entry_dirty() and get rid of H5[A]C_mark_pinned_entry_dirty(). Tested on: FreeBSD/32 6.3 (duty) in debug mode (h5committested on trunk)
* [svn-r18710] Purpose:Mike McGreevy2010-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Improve configure's large-file support control. Description: Modified configure to now attempt to add defines necessary for supporting largefiles on all systems, instead of solely on linux. This is in response to user requests to enable largefile support on Solaris by default, as well as to give extra control on AIX (instead of just jamming the necessary flag into the config files). The old --enable-linux-lfs flag is being deprecated in favor of the --enable-largefile flag (enabled by default), which can be used on all platforms. --disable-linux-lfs can still be used to disable largefile support (on linux) when the --enable-largefile flag is not specified. On systems where large files cannot be supported in this manner, configure will report as such. Tested: h5committest AIX (NCSA's blue_print machine) duty, liberty, and linew.
* [svn-r18704] Description:Quincey Koziol2010-05-051-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Bring r18702 from trunk to 1.8 branch: Bring r18672 from metadata journaling "merging" branch to trunk: Mostly changes to move to only using one 'user data' parameter for calls to H5AC_protect(), along with some minor reformatting code cleanups. Tested on: FreeBSD/32 6.3 (duty) in debug mode FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (jam) w/PGI compilers, w/default API=1.8.x, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (amani) w/Intel compilers, w/default API=1.6.x, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode Mac OS X/32 10.6.3 (amazon) in debug mode Mac OS X/32 10.6.3 (amazon) w/C++ & FORTRAN, w/threadsafe, in production mode
* [svn-r18701] ID 1853:Albert Cheng2010-05-041-0/+1
| | | | | | | | Added the configure option --enable-h5dump-packed-bits for the h5dump optional feature. Tested: Jam (default and --disable-h5dump-packed-bits).
* [svn-r18580] Purpose:Mike McGreevy2010-04-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Autotool Upgrade / Libtool Bug Fix Description: Updated autotools referenced in bin/reconfigure as follows: Autoconf 2.64 --> Autoconf 2.65 Automake 1.11 --> Automake 1.11.1 Libtool 2.2.6a --> Libtool 2.2.6b-mcg The referenced libtool version is a custom version of 2.2.6b. It has been tweaked to fix a bug in libtool that occurs when using PGI 10.0 compilers. A check incorrectly categorizes the C++ compiler as version 1.0 instead of 10.0, and the link line is subsequently set up incorrectly and fails to compile. A patch has been made available and will be included in the next release of libtool, but in the meantime I've applied the patch to a custom installation as indicated above. This bin/reconfigure now references the custom installation, and the resulting configure script will correctly categorize the PGI 10.0 C++ compiler. Ran bin/reconfigure to regenerate configure and makefiles. Tested: jam and amani with PGI 10.0 compilers. h5committest
* [svn-r18198] Description:Quincey Koziol2010-01-302-30/+30
| | | | | | | | | Trim trailing whitespace from source code files, with following command: find . \( -name "*.[ch]" -or -name "*.cpp" -or -name "*.f90" \) -print |xargs -n 1 sed -i "" 's/[[:blank:]]*$//' Tested on: None - eyeballed only
* [svn-r18172] Description:Quincey Koziol2010-01-271-55/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring r18171 from trunk to 1.8 branch (with appropriate tweaks): Bring r18169 from 'merge_metadata_journaling' branch back to trunk: Converge changes on metadata_journaling branch and trunk: - Remove H5F_t* parameter from H5HL_unprotect() - Remove H5F_t* parameter from H5HL_dirty() - Remove H5F_t* parameter from H5O_unprotect() - Bring changes to metadata caching routines back: - H5AC_pin_protected_entry() - H5AC_resize_pinned_entry() - H5AC_unpin_entry() - H5AC_mark_pinned_entry_dirty() - H5AC_mark_pinned_or_protected_entry_dirty() - Revise internal H5C routines to drop H5F_t* and/or H5C_t* as parameter where possible - Revise tests to follow internal routine changes Also, other minor changes to speedup the 'cache' test. Tested on: FreeBSD/32 6.3 (duty) in debug mode FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (jam) w/PGI compilers, w/default API=1.8.x, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (amani) w/Intel compilers, w/default API=1.6.x, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in debug mode Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode Mac OS X/32 10.6.2 (amazon) in debug mode Mac OS X/32 10.6.2 (amazon) w/C++ & FORTRAN, w/threadsafe,
* [svn-r18106] bug 1673:Albert Cheng2010-01-121-4/+4
| | | | | | | | | | | | | | The mixed use of RUNTEST (original) and RUNTESTS (new) caused confusion. E.g., the timings in test/ was still using the old $RUNTEST. It made more sense to use $RUNTEST which is used by the dejagnu feature of automake. So, I changed all $RUNTEST or $RUNTESTS to $RUNEXEC. config/commence.am & config/conclude.am are the two files that got changes. Also fixed an error in test/Makefile.am. The rest are changed by bin/reconfigure. Tested: h5committested.
* [svn-r18032] Description:Quincey Koziol2009-12-172-18/+19
| | | | | | | | | | | | | | | | | Bring r18031 from trunk to 1.8 branch: Bring r18030 from merge_metadata_journaling branch to trunk: Bring "brush clearing" changes (whitespace & style issues, mostly) from metadata_journaling branch to the "merging" branch, to converge the trunk and the metadata_journaling branch. Also, some other minor cleanups along the way. Tested on: FreeBSD/32 6.3 (duty) in debug mode FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode (h5committested on trunk)
* [svn-r17655] Purpose:Mike McGreevy2009-10-151-4/+4
| | | | | | | | | | | | Configure cache-val cleanup Description: Corrected some misnamed cache values in configure / config files. Tested: h5committest
* [svn-r17645] Purpose:Mike McGreevy2009-10-151-7/+14
| | | | | | | | | | | | | | | Merge from Trunk Description: Merging all of my CFLAGS-related changes from trunk to 1.8 This includes revision #s: 17616, 17625, 17627, 17639, and 17643. Tested: h5committest and some additional checks on our FreeBSD as well as NCSA's machines.
* [svn-r17577] Simple improvement to clean up go during "make check-clean"Albert Cheng2009-10-012-4/+6
| | | | | | and removed the redundant cleaning of Makefile. Tested: jam parallel.
* [svn-r17439] Purpose:Mike McGreevy2009-08-311-28/+62
| | | | | | | | | | | | | | | | | | | | | | Updating autotools Description: Bring revisions 17345 and 17357 from trunk to 1.8, specifically: - Automake upgraded to 1.11 - Autoconf upgraded to 2.64 - bin/reconfigure script edited to use new versions (on jam), and run to generate new configure script and Makefile.in's. - configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings (in order to comply with new autoconf standard). - bin/install-sh script replaced with new version as provided by automake. Tested: - All issues on trunk were resolved, so only tested on jam and linew. Any other outliers should be caught by daily tests.
* [svn-r17415] Description:Quincey Koziol2009-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring r17408, 17411, 17412, 17413 & 17414 from trunk back to 1.8 branch: r17408: Move flush operation on mounted file hierarchy into H5Fmount module. r17411: Make H5AC_flush just flush the cache and make H5AC_dest perform the proper parallel synchronization before destroying the cache. Also, further discriminate between 'closing' and 'non-closing' actions in H5F_flush. r17412: Seperate 'flush' functionality from 'destroy' functionality at the H5F level also. r17413: Remove vestigial intermediate routine for flushing file and move it into API routine. Also, remove private, unused (now) 'H5F_FLUSH_DOWN' symbol from public header file. r17414: Flush the core VFD's buffer before closing the file, also flush the metadata accumulator before reseting it. Write the driver info message out in the superblock flush routine more directly, instead of using wrapper routine, since the wrapper routine won't work when the superblock is being shutdown. Tested on: FreeBSD/32 6.3 (duty) in debug mode (h5committest performed on trunk)
* [svn-r17380] Description:Quincey Koziol2009-08-182-33/+4
| | | | | | | | | | | | | Bring r17376 from trunk to 1.8 branch: Make similar change to windows VFD as sec2 VFD, when converting from a family file to a single file. Tweak file sizes expected for parallel tests. Tested on: FreeBSD/32 6.3 (duty) w/debug (h5committested on trunk)
* [svn-r17374] Description:Quincey Koziol2009-08-181-1/+5
| | | | | | | | | | | Bring r17365 from trunk to 1.8 branch: Final merge of changes from sblock_mdc branch back to trunk. The superblock is now managed by the metadata cache. Tested on: FreeBSD/32 6.3 (duty) in debug mode (h5committest performed on trunk)
* [svn-r17317] Did some code cleanup.Albert Cheng2009-08-112-6/+8
| | | | | | | | | | t_file.c: replace the old variable, color, with a more meaningfule name of is_old. t_mpi.c: use the official mpi_file_delete, instead of remove, to delete a file in MPI environment. Tested: Only jam in parallel as changes are trivial.
* [svn-r16793] Description:Mike McGreevy2009-04-201-4/+4
| | | | | | | | | | | | - Updated bin/reconfigure to use latest version of automake (1.10.2). Regenerated Makefile.in's by running bin/reconfigure. - Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran libraries. Tested: jam, liberty, smirom
* [svn-r16771] Modified parallel tests so they can run with arbitrary number ↵Christian Chilan2009-04-174-60/+77
| | | | | | of processors. Tested on jam and abe.
* [svn-r16566] Description:Quincey Koziol2009-03-1110-186/+126
| | | | | | | | Bring r16560 back from trunk. Tested on: Mac OS X/32 10.5.6 (amazon) debug & production (Following up with tests on more platforms)
* [svn-r16562] Purpose:Mike McGreevy2009-03-101-3/+3
| | | | | | | | | | | | | | | | | | Bug Fix Description: Fixing BZ #1381. The --includedir=DIR configure option, which is used to spceify installation location of C header files, did not work correctly as the path was hard-coded into config/commence.am. I'm presuming this is because an older version of automake didn't know where to put C header files. In any case, removing this line now defaults the includedir to the same directory that it is currently hard-coded to, and also fixes the configure flag which allows for customization of this value. Tested: jam, liberty
* [svn-r16519] merge 16518 from trunkPedro Vicente Nunes2009-02-261-0/+1
| | | | | | have 2 expected outputs for 2 h5ls runs depending if run on a big or little endian machine. Configure.in was modified to export a variable carrying endianess information to testh5ls.sh. This script then compares the current run with 2 expected outputs, one for a big-endian machine (linew was used to generate the output), other for little endian (jam was used to generate the output) the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other tested: jam, linew
* [svn-r16452] Repaired intermittant failure of the t_cache test in testpar.John Mainzer2009-02-061-7/+147
| | | | | | | | | | | | | | | | | | | | | | | | | The failure was caused by some over active sanity checking code in unlock_entry(). In essence the code did not consider the possibility that under certain, very unusual circumstances, an entry could be flushed to disk during the H5AC_unprotect() call. Instead, it simply failed if a dirty entry was marked clean after the call to H5AC_unprotect(). This bug in the test code was exposed by recent changes to the default cache configuration made as part of the "metadata blizard" bug fix. Fixed the bug by adding code to detect when an entry is flushed during the call to H5AC_unprotect(), and not trigger a failure if a dirty entry is marked clean after a call to H5AC_unprotect() if the entry has been flushed. In passing also found and fixed another test bug in which expunged entries were erroneously marked as dirty in the test code's independant register of entry status. Tested parallel on Phoenix (AMD64 Linux) and Jam. No further testing, as the fix was tested extensively prior to checkin on the 1.9 branch.
* [svn-r16341] Description:Frank Baker2009-01-221-1/+1
| | | | | | Changed 'THG' to 'The HDF Group' in various HDF5 source files, most of which are <subdirectory>/COPYING. -- Closes Bugzilla entry 1403.
* [svn-r15898] Purpose: Bug FixMike McGreevy2008-10-171-6/+1
| | | | | | | | | | | | | | | Description: Libtool wasn't working on linew because the script was not working with the Solaris Bourne shell. Libtool has built- in detection to ensure that it uses an appropriate shell, but our config/commence.am was hard coding this shell to be /bin/sh. Removing this line allows the shell to be picked up by configure, thus allowing libtool to use the correct shell on linew (bash). This was initially added to correct for a problem on an old machine (janus), so shoudn't be needed for machines we currently support. Tested: full make check install on kagiso and linew, compile only on smirom, duty, and liberty.
* [svn-r15881] Purpose: Bug Fixes, Libtool UpgradeMike McGreevy2008-10-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Description: 1) configure now sets LD_LIBRARY_PATH before checking for presence of SZIP encoder, so user does not need to set this. The path is then saved and sent to Makefiles, and used when "make check-install" is invoked, so user doesn't need to set this manually. 2) Upgraded libtool to version 2.2.6a 3) Rearranged tools build order as h5dump depends on existence of h5diff and h5import. Since h5dump is a sister directory as opposed to a parent of either, it doesn't know about the build rules of these tools, so setting any sort of explicit dependency confuses automake as it won't know how to build the tools. Instead, setting CONFIG = ordered forces an in-order traversal of each tools subdirectory. (without it will also traverse in order by default, but this should prevent gmake's -j option from jumping ahead as well). 'make check install' should now be able to be invoked after 'configure' without causing a dependency failure. 4) Removed H5_HAVE_LARGE_HSIZET macro from vms/src/h5pubconf.h, as this macro has now been out of the code for some time. (vms pubconf needs to be updated manually, which is why it was still hanging around). Tested: kagiso, smirom, liberty Note: h5diff looks to be causing failures in h5copy and h5dump tools tests, though these were present before any of my changes. My changes only affect build order and configuration setup, and shouldn't prevent fixes for these failures coming in after this checkin. Other than these, tests pass fine.
* [svn-r15826] Description:Quincey Koziol2008-10-091-3/+3
| | | | | | | | | | | | | Bring revision 15825 from trunk: Fix various problems with a the core & sec2 VFDs. Improve the h5_get_file_size() routine to handle files created with VFDs that use multiple files. Tested on: FreeBSD/32 6.3 (duty) Already tested on other machine, in trunk.
* [svn-r15809] Some test produced files were not cleaned by "make clean".Albert Cheng2008-10-082-2/+3
| | | | | | Added them to the clean list. Tested: kagiso, serial and parallel.
* [svn-r15801] Description:Quincey Koziol2008-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Bring r15800 back from trunk: - File free space branch changes through r15794 Tested on: Mac OS X/32 10.5.5 (amazon) in debug mode Mac OS X/32 10.5.5 (amazon) w/C++ & FORTRAN, w/threadsafe, in production mode FreeBSD/32 6.3 (duty) in debug mode FreeBSD/64 6.3 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/Intel compilers w/default API=1.6.x, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode Linux/64-amd64 2.6 (abe) w/parallel, w/FORTRAN, in production mode
* [svn-r15629] Description:Quincey Koziol2008-09-1610-181/+181
| | | | | | | | | | | | | Remove trailing whitespace from C/C++ source files, with the following script: foreach f (*.[ch] *.cpp) sed 's/[[:blank:]]*$//' $f > sed.out && mv sed.out $f end Tested on: Mac OS X/32 10.5.5 (amazon) No need for h5committest, just whitespace changes...
* [svn-r15625] This check-in fixes a bug inside parallel HDF5 testsuite.MuQun Yang2008-09-151-2/+22
| | | | | | | | | When enable-debug is turned on, a special macro block H5_HAVE_INSTRUMENTED_LIBRARY inside HDF5 will be executed to check if some collective chunk IO test cases are being run with the correct settings(one link, multiple chunk etc.). However,when complicated derived datatype in some mpi-io packages are not supported, the library has to switch one link IO with/without the optimization to multiple chunk IO with/without the optimization. The current testsuite doesn't know this and generates a false assertion failure message. This check-in fix this problem by providing a second property to avoid the false faiure message. Tested at abe(NCSA linux cluster) and kagiso.
* [svn-r15181] Purpose: _WIN32 macro cleanupScott Wegner2008-06-092-12/+0
| | | | | | | | | | Description: As part of our Windows cleanup, we try to remove windows-specific tweaks in the source code. There are many instances where Windows code is introduces via ifdef's. We re-evaluate whether they are still required, and found that many of them are not. Others we change to "feature"-specific code, rather than Windows-specific. Tested: VS2005 on WinXP VS.NET on WinXP h5committest (kagisopp, smirom, linew)
* [svn-r15042] Bug fix.Albert Cheng2008-05-201-4/+4
| | | | | | | | | | | | | | | | | | | Description: The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the Fortran API source so that conclude.am will give fortran api prefix in the test output. The symbox HDF_FORTRAN is also used in configure for a different purpose (indicated --enable-fortran). They conflicted. Similar problem for the symbol HDF_CXX. Solution: Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is a more appropriate name. Same for CXX_API. Along the way, discovered that the Makefile.am of hl/fortran/test and hl/cxx/test did not have those symbols at all. Added them in. Platform tested: Kagiso serial and h5committested (kagisopp, smirom, linew).
* [svn-r15033] Purpose:Albert Cheng2008-05-191-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improvement. Description: src/libhdf5.settings was the initial configure summary and is installed. Then configure is changed to dump a summary of the configure settings to the output and also append it to src/libhdf5.settings. That created two different output formats and duplicated information. This is the initial attempt to clean up this confusion and unify the output format. It is decided to use the src/libhdf5.settings template as the unified means. This requires more macros symbols be defined. The following symbols are all related to generating the src/libhdf5.settings file. AC_SUBST(EXTERNAL_FILTERS) AC_SUBST(MPE) MPE=no AC_SUBST(STATIC_EXEC) STATIC_EXEC=no AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no AC_SUBST(FC) HDF_FORTRAN=no AC_SUBST(HDF_CXX) HDF_CXX=no AC_SUBST(CXX) HDF_CXX=no AC_SUBST(HDF5_HL) HDF5_HL=yes AC_SUBST(GPFS) GPFS=no AC_SUBST(LINUX_LFS) LINUX_LFS=no AC_SUBST(INSTRUMENT) INSTRUMENT=no AC_SUBST(CODESTACK) CODESTACK=no AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no AC_SUBST(DIRECT_VFD) DIRECT_VFD=no AC_SUBST(THREADSAFE) THREADSAFE=no AC_SUBST(STATIC_SHARED) AC_SUBST(enable_shared) AC_SUBST(enable_static) AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a` The src/libhdf5.settings.in has CONDITIONAL's added to it too. The untrue conditions turned into a "#" and these lines are cleaned by the post processing script. Platform tested: h5committest on kagiso, smirom and linew. (smirom had failures not due to my changes.)
* [svn-r15006] Purpose: configure cleanupMike McGreevy2008-05-151-1/+0
| | | | | | | Description: cleaning up configure related to removal of --disable-hsizet flag, which we no longer support. Tested: kagiso
* [svn-r14824] Purpose: Updating HDF5 1.8 to use automake 1.10.1 and ↵Mike McGreevy2008-04-101-14/+18
| | | | | | | | | | | | | | | | | | libtool 2.2 Description: Updated bin/reconfigure script to reflect the new versions of libtool and automake in the /home1/packages/ directory. Rearranged configure.in script. For some reason, when using libtool 2.2, the libtool script doesn't generate until later in the configuration process, so I had to move a test that parsed through the libtool script to a point after where it was actually being generated. Ran libtoolize on the project, and ran bin/reconfigure to regenerate configure and Makefile.in's throughout. Tested: kagiso, smirom, linew, tg-login
* [svn-r14442] Modified metadata cache to adapt more quickly to the insertion of aJohn Mainzer2008-01-181-1/+1
| | | | | | | | | | | | | | | | | large entry, or to a large increases in the size of an existing entry. This required some additions to the cache configuration structure, and thus will require changes in the metadata cache documentation. The basic idea is to monitor the size of entries as they are loaded, inserted, or increased in size. If the size of the entry (or increase) exceeds some user selected fraction of the size of the cache, increase the size of the cache. Note that this fix was designed quickly -- while it deals with the use case that exposed the problem, we may have to revisit the issue later. Tested serial and parallel on Phoenix, and h5committest.
* [svn-r14420] Description:Quincey Koziol2008-01-151-1/+1
| | | | | | | | Correct the prototype for H5Sselect_elements() to take an 'hsize_t *' for the coordinates, instead of 'hsize_t **'. Tested on: Mac OS X/32 10.5.1 (amazon)
* [svn-r14402] Description:Quincey Koziol2008-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add work-around to allow reading files that were produced with a buggy earlier version of the library, which could create objects with the wrong object header message count. There is now a configure flag "--enable-strict-format-checks" which triggers a failure on reading a file with this sort of corruption (when enabled) and allows the object to be read (when disabled). The default value for the "strict-format-checks" flag is yes when the "debug" flag is enabled and no when the "debug" flag is disabled. Note that if strict format checks are disabled (allowing objects with this particular kind of corruption to be read) and the file is opened with write access, the library will re-write the object header for the corrupt object with the correct # of object header messages. This closes bugzilla bug #1010. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
* [svn-r14218] Description:Quincey Koziol2007-10-301-3/+3
| | | | | | | | | | | | | | | | | | | | | Changed H5Acreate2 -> H5Acreate_by_name, to be more consistent with other new API routines. Re-added simpler form of H5Acreate2, which creates attributes directly on an object. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode
* [svn-r14217] Description:Quincey Koziol2007-10-301-3/+3
| | | | | | | | | | | | | | | | | | | | | Change H5Aopen -> H5Aopen_by_name, in order to be more consistent with other new API routines. Re-add H5Aopen as a simpler routine, to open attributes on a particular object. (Much like the old H5Aopen_name routine). Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode
* [svn-r14205] Description:Quincey Koziol2007-10-121-1/+1
| | | | | | | Fix typo from recent changes Tested on: None - just eyeballed.
* [svn-r14204] Description:Quincey Koziol2007-10-121-17/+20
| | | | | | | | | | | | | | | | | | | | | | Move H5Pinsert() out of old "compat v1.6" section and into API versioning, switching internal usage to H5Pinsert2(). Add regression test for H5Pinsert1() Clean up some other minor warnings. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode
generated by cgit v0.12 at 2024-09-27 20:16:59 (GMT)