summaryrefslogtreecommitdiffstats
path: root/testpar
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r4024] Purpose:Raymond Lu2001-06-201-12/+35
| | | | | | | | | | | | Multiple-group testing Description: Added multiple groups under root group and multiple subgroups of certain levels. Also writes several datasets in each group in parallel. Solution: Platforms tested: MPICH(IRIX 6.5, IRIX64 6.5(64), IRIX64 6.5(N32), Linux, SunOS 5.6) and SGI MPI(IRIX64 6.5).
* [svn-r4023] Raymond Lu2001-06-201-0/+265
| | | | | | | | | | | | | Purpose: Multiple-group testing Description: Added multiple groups under root group and multiple subgroups of certain levels. Also writes several datasets in each group in parallel. Solution: Platforms tested: MPICH(IRIX 6.5, IRIX64 6.5(64), IRIX64 6.5(N32), Linux, SunOS 5.6) and SGI MPI(IRIX64 6.5).
* [svn-r3973] Purpose:Albert Cheng2001-06-072-22/+68
| | | | | | | | | | | | | Bug fix Description: The t_mpi used to fail and exit if any error detected. That aborted other process in a "make check" situation. Solution: Introduced a new error verification as INFO. INFO is for information only. It does not increase nerrors count. The program always exits with 0. Platforms tested: eirene with mpich.
* [svn-r3929] Purpose:Albert Cheng2001-05-131-7/+4
| | | | | | Cleanup old unused code. Edited couple comments. Platforms tested: modi4,pp
* [svn-r3927] Purpose:Albert Cheng2001-05-131-2/+6
| | | | | | | | | | Bug fix Description: Some mpi.h already includes MPI-IO definitions in it (e.g., SGI, SP2). Made the #include of mpio.h be dependent on whether some MPI-IO constant is already defined or not. Platforms tested: modi4 (IRIX64) and IBM SP2.
* [svn-r3926] Description:Albert Cheng2001-05-131-6/+18
| | | | | | | | | | | | Changed MPI_File_seek then MPI_File_write or MPI_File_read to just MPI_File_write_at and MPI_File_read_at. Some compiler, e.g., IBM mpcc_r does not support MPI_File_seek and MPI_File_read or MPI_File_write. This is a better measurement against HDF5 performance since HDF5 uses MPI_File_write_at and MPI_File_read_at all the times. It is a more thread safe to use MPI_xxx_at than the other seek then read/write approaches. Platforms tested: modi4 (irix64 parallel), IBM sp2.
* [svn-r3913] Purpose:Bill Wendling2001-05-111-6/+4
| | | | | | | | | | | Bug Fix Description: FILENAME_MAX is short on some systems. It's better to use PATH_MAX which tends to be longer (we hope). Solution: Removed FILENAME_MAX and replaced it with PATH_MAX instead. Platforms tested: Skinner (SDSC HP N9000).
* [svn-r3903] Purpose:Albert Cheng2001-05-101-1/+1
| | | | | | | | Bug fix Description: test_mpio_offset() was called with wrong syntax. Dumb mistake. Platforms tested: modi4, pp
* [svn-r3901] Purpose:Albert Cheng2001-05-101-0/+2
| | | | | | | | | | Bug fix Description: added a barrier to prevent racing condition before remove file and open file. Platforms tested: modi4,pp cVS: ----------------------------------------------------------------------
* [svn-r3882] Purpose:Albert Cheng2001-05-013-0/+745
| | | | | | | | | | Feature Description: Show simple performance of the MPIO and the HDF5-IO. The mpi-perf.c is contributed by Robert Ross of ANL. The perf.c is derived from mpi-perf.c Platforms tested: Modi4 (O2K, parallel)
* [svn-r3818] Purpose:Albert Cheng2001-04-181-26/+18
| | | | | | | | | | | | | Bug fix and clean up. Description: The part that should test 4GB was actually testing 2GB due to typo. Solution: Corrected the typo to use 4GB constant. Rearranged the code to group 2GB and 4GB tests in their own. Removed some duplicated testing code. Platforms tested: modi4.
* [svn-r3780] Purpose:Bill Wendling2001-04-056-7/+8
| | | | | | | | | | | | | | Update Description: Changed #include <hdf5_file.h> to #include "hdf5_file.h" to be consistent with the new way of generating dependencies.
* [svn-r3717] Purpose:Albert Cheng2001-03-261-0/+182
| | | | | | | | | | | | | new test Description: Added two new tests. test_mpio_offset: Verify that MPI_Offset exceeding 2**31 can be computed correctly. test_mpio_gb_file Test if MPIO can write file from under 2GB to over 2GB and then from under 4GB to over 4GB. Platforms tested: modi4(-64), tflops.
* [svn-r3664] Purpose:Albert Cheng2001-03-191-1/+1
| | | | | | | | | | | | Improvement Description: Changed the default value of $NPROCS from 2 to 3. This is the value libSAF uses since 3 processes have a much bigger chance catching parallel errors than just 2 processes. Changed the default dataset sizes from 800 to 1200 so that it is a multiple for 3 (and 8 too which is ofter used in the Tflops test.) Platforms tested: Modi4 (IRIX64) both serial and parallel modes.
* [svn-r3304] Purpose:Quincey Koziol2001-01-182-6/+1
| | | | | | | | Code update Description: Remove ragged array code & tests from library before release. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r3119] Purpose:Albert Cheng2000-12-124-20/+31
| | | | | | | | | | | | | | | | | | | New features Description: Some testers found the filename lengths too short. Changed it to use the FILENAME_MAX usually defined in stdio.h. If not, set it to 512 which should be sufficient for users but should not exceed any system limits. Also added a new test parameters of ndatasets so that the tester can specific a different number of datasets for the multiple datasets tests. Changed the datatype of datasets created to DOUBLE. This eliminates the current racing conditions. But the racing bugs during conversion still need to be tracked down and squashed. Platforms tested: Modi4 -64.
* [svn-r3009] Purpose:Albert Cheng2000-11-281-9/+27
| | | | | | | | | | | | | | New parallel test features Description: Added test cases: INDEPENDENT write with some processes do not participate at all. The library should not hang for this case. COLLECTIVE read/write with some processes asking for zero elements. The library should work properly and not hanging. Some house cleaning: get rid of a conditional directive that was fixed already. Platforms tested: IRIX64,-64,parallel
* [svn-r3007] Purpose:Albert Cheng2000-11-281-9/+9
| | | | | | | | | | Feature, kind of Description: Moved the multiple dataset test out of the write-test part so that it can be skipped or tested independent of the other tests. Platforms tested: IRIX64,-64,parallel.
* [svn-r3005] Purpose:Quincey Koziol2000-11-271-4/+4
| | | | | | | | Backward compatibility code Description: Add in code to allow the library to emulate the v1.2 API and behavior. Platforms tested: FreeBSD 4.2 (hawkwind)
* [svn-r2993] Purpose:Albert Cheng2000-11-211-8/+58
| | | | | | | | | | | | | | New feature Description: Added tests to make sure collective read or write works correctly even if some process has no data to transfer. ZROW--process 0 asks for zero rows of data while other processes ask for a slab of rows. ZCOL--process 0 asks for zero columns of data while other processes ask for a slab of columns. Platforms tested: IRIX64 parallel (-64,-n32). cvS: ----------------------------------------------------------------------
* [svn-r2983] Purpose:Albert Cheng2000-11-212-9/+9
| | | | | | | | | | | | | | | Simple changes Description: testphdf5.h: Call MPI_Abort when error is detected. MPI_Finalized was used before but it might hang if the test has already encountered errors. Also, it does not do the H5Eprint any more since auto report is on. t_mdest.c: Changed the variable name of rank and nprocs to mpi_rank and mpi_size so that it is the same with the other tests and can use the VRFY macro call. Platforms tested: modi4-64.
* [svn-r2973] Purpose:Albert Cheng2000-11-171-40/+41
| | | | | | | | | | | | | | Bug fix, cleanup,... Description: The test was doing the hyperslab select incorrectly (thinking count was the block length. Solution: Fixed it to do the correct hyperslab selection. Changed it to calculate different data for different datasets. Changed output by rows instead by cols. It tests the purpose of creating multiple datasets the same but runs faster. Platforms tested: modi4-64.
* [svn-r2710] Purpose:Albert Cheng2000-10-204-23/+145
| | | | | | | | | | | | | | Features, kind of. Description: Separated the MPI features test into its own independent program so that it can be tested on its own without too much HDF5 stuff involved. Added automatic removal of temporary test files after the tests completed. Reduced the size of the dataset dimensions to avoid tripping the SGI MPI problems of running out of internal mpi type entries. Platforms tested: O2K -64
* [svn-r2641] Purpose:Albert Cheng2000-10-094-23/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added features Description: There were no automatic tests for transfering zero elements. Solution: t_dset.c: Added two new patterns of ZROW (zero rows for process 0) and ZCOL(zero columns for process 0). ZROW test was added but it failed because the current library does not accept it. Not compiled in now. Need to fix the library before turning it back on again and also to add the ZCOL test. t_mdset.c: Added statement to show progress. Also the MPI_Barrier() call get processes synchornoized. It eliminates the racing condition but this is not a permenant solution. The library code needs to be fixed. testphdf5.c: Added a bunch of MPI_Type_XXX debug code. Added the -md option to skip the multiple datasets tests. Changed the cosmitic appearance of the banner messages. testphdf5.h: When an error is detected, the old way was to call MPI_Finalize() before exiting. This sometimes hangs because some processes may be waiting for a message of a different tag. Changed to call MPI_Abort() for now so that the whole MPI job would abort rather than hanging due resource limits exceeded. Added the definition of ZROW and ZCOL. Platforms tested: Modi4 -64.
* [svn-r2590] Purpose:Albert Cheng2000-09-241-96/+111
| | | | | | | | | | | | | | | | | | | Bug fix Description: The old code was using count as the block size. The result was asking for a slab of count blocks, each of 1 element. The recent change in the hyperslab algorithm exposed this problem. (The old algorithm merge the count blocks back into 1 big block of count elements.) (This error was due to that the block argument was not in the very early version of hyperslab. Then it was not updated since it had been "working".) Solution: Added in the block argument to the setup and calculation of slab and its data. Also found a dumb error in the dataset_fill algorithm in which stride was used in the calculation. Not so for the cases of BYROW and BYCOL. Platforms tested: modi4 parallel, both -64 an -n32 modes.
* [svn-r1947] Changed the test files prefix to use the h5_fixname() in ↵Albert Cheng2000-01-265-43/+43
| | | | | | | | | | | | test/libh5test.a. Makefile.in: Added test/ as one of the -I directories to search for header files. Needed because <h5test.h> is used. t_file.c t_mpi.c testphdf5.c testphdf5.h: Added FILENAME to meet the assumption in h5test.h. (May use CLEANUP in the future.) Moved the prefix setting to the h5_fixname().
* [svn-r1914] t_mdset.c:Albert Cheng1999-12-202-6/+5
| | | | | | | Increase the test size to 32. Put in a check to make sure number of processes are not bigger than SIZE. testphdf5.c: Fixed a mistake in the prototype of pause_proc to reflect no arguments.
* [svn-r1899] Chagned to venue to call pause_proc via the profile feature of ↵Albert Cheng1999-12-171-12/+13
| | | | MPI_Init.
* [svn-r1883] Added libh5test.a links so that parallel tests may make use of ↵Albert Cheng1999-12-171-2/+3
| | | | | | routines in the other test library.
* [svn-r1882] New entries automatically created by one of gmake/configure/autoconfAlbert Cheng1999-12-171-0/+32
| | | | or their buddies, due to the addition of new test module.
* [svn-r1873] added new test for multiple dataset writes to parallel testsChee-Wai Lee1999-12-103-2/+65
|
* [svn-r1859] * 1999-12-09Robb Matzke1999-12-091-4/+4
| | | | | | | | | | | | | | ** src/H5FDpublic.h Added a #define for H5_HAVE_VFL to make life easier for application programmers. ** config/depend1 A minor tweak to the way GNU systems generate file dependencies for the Makefiles. ** src/H5T.c Fixed a bug with enumeration types not having the correct object header pointer.
* [svn-r1858] Changed the default testfiles to be in /tmp instead of current ↵Albert Cheng1999-12-071-1/+5
| | | | | | | directory. Current directory in which the parallel code is compiled is usually not suitable for parallel I/O test.
* [svn-r1818] Testpar have been integrated. File no longer needed.Albert Cheng1999-11-041-44/+0
|
* [svn-r1806] * 1999-11-02Robb Matzke1999-11-021-4/+127
| | | | | | | | | | | | | ** bin/rpmsync ** config/depend1.in Tweaks for versions of `make' that can't search directories. ** examples/Dependencies ** src/Dependencies ** test/Dependencies ** testpar/Dependencies ** tools/Dependencies Regenerated all these with more complete path names.
* [svn-r1802] Changes since 19991019Robb Matzke1999-11-012-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./MANIFEST ./configure.in ./configure [REGENERATED] Added more checking for `make' features. ./Makefile.in ./doc/Makefile.in ./doc/html/Makefile.in ./doc/html/Tutor/Makefile.in ./examples/Makefile.in ./pablo/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./config/commence.in ./config/conclude.in ./config/depend.in [REMOVED] ./config/depend1.in [NEW] ./config/depend2.in [NEW] ./config/depend3.in [NEW] ./config/depend4.in [NEW] ./config/dependN.in [NEW] The directory search stuff was moved into commence.in, thereby shortening the Makefile.in prologues. ./doc/html/Dependencies [NEW] ./doc/html/Tutor/Dependencies [NEW] ./examples/Dependencies [NEW] ./src/Dependencies [NEW] ./test/Dependencies [NEW] ./testpar/Dependencies [NEW] ./tools/Dependencies [NEW] The `.distdep' files were all renamed to `Dependencies' to make them more obvious. They are required (but may be empty) in every directory that has a Makefile.in that ends with @CONCLUDE@ (you'll get an obvious error from make if you forgot to create one). ./bin/trace ./src/H5.c Added H5E_major_t and H5E_minor_t although tracing only prints the integer value. ./src/H5E.c ./src/H5Epublic.h Added tracing information. ./src/H5FDcore.c ./src/H5FDfamily.c ./src/H5FDgass.c ./src/H5FDmpio.c ./src/H5FDsec2.c ./src/H5FDstdio.c Fixed places where FUNC_LEAVE() evaluated it's argument more than once. Added tracing information. Wrapped long lines. ./config/gnu-flags Fixed a syntax error when we don't have a gnu compiler.
* [svn-r1568] Changes since 19990730Robb Matzke1999-08-102-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- This extensive change is the virtual file layer implementation. I've ported and tested the sec2, family, and core drivers and only ported the mpio driver (Albert will test it). So if you need MPIO I would recommend sticking with the previous version for a while. You will get a few compile warnings about split and stdio drivers not being implemented and possibly tracing information not inserted in some of the drivers. You can safely ignore them but I plan to fix them. I'm still working on the split driver because I just realized that it needs a part of the VFL that isn't written yet. Documentation is being updated also because there were some minor changes (mostly just name changes). It should be available on my web site later this week. ./MANIFEST ./src/Makefile.in ./src/hdf5.h ./src/H5Flow.c [REMOVED] ./src/H5Fstdio.c [REMOVED] ./src/H5Fsec2.c [REMOVED] ./src/H5Fsplit.c [REMOVED] ./src/H5Fmpio.c [REMOVED] ./src/H5Ffamily.c [REMOVED] ./src/H5Fcore.c [REMOVED] ./src/H5MFpublic.h [REMOVED] ./src/H5FD.c [NEW] ./src/H5FDcore.c [NEW] ./src/H5FDcore.h [NEW] ./src/H5FDfamily.c [NEW] ./src/H5FDfamily.h [NEW] ./src/H5FDmpio.c [NEW] ./src/H5FDmpio.h [NEW] ./src/H5FDprivate.h [NEW] ./src/H5FDpublic.h [NEW] ./src/H5FDsec2.c [NEW] ./src/H5FDsec2.h [NEW] Removed/added files for virtual file layer. ./bin/trace ./src/H5.c Removed unused public datatypes and added new VFL public datatypes. Changed an error message. ./config/BlankForm ./config/dec-flags ./config/gnu-flags ./config/hpux10.20 ./config/hpux9.03 ./config/irix5.x ./config/irix6.x ./config/solaris2.x ./config/unicosmk Removed the H5F_OPT_SEEK and H5F_LOW_DFLT constants from the configuration since they're no longer applicable. The default file driver is always the sec2 driver and it always optimizes calls to lseek() or lseek64(). ./config/depend.in C preprocessor errors generated during automatic dependency building are sent to /dev/null to prevent them from appearing twice in the make output. ./src/H5AC.c ./src/H5B.c ./src/H5D.c ./src/H5F.c ./src/H5G.c ./src/H5Gent.c ./src/H5Gnode.c ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5Oattr.c ./src/H5Odtype.c ./src/H5Oefl.c ./src/H5Oshared.c ./src/H5T.c ./src/H5detect.c ./test/ohdr.c Changed H5F_ADDR_UNDEF to HADDR_UNDEF to be more consistent with the `haddr_t' datatype which is now a public type. ./src/H5D.c ./src/H5P.c ./src/H5Ppublic.h ./src/H5Tconv.c ./test/cmpd_dset.c ./test/dsets.c ./test/overhead.c ./test/tselect.c ./test/tvltypes.c The H5P_DATASET_XFER constant was changed to H5P_DATA_XFER because the properties apply to all types of I/O operations, not just datasets. ./src/H5B.c ./src/H5Bprivate.h ./src/H5D.c ./src/H5Dpublic.h ./src/H5F.c ./src/H5Farray.c ./src/H5Fistore.c ./src/H5Fprivate.h ./src/H5Fpublic.h ./src/H5Gnode.c ./src/H5Gpkg.h ./src/H5HG.c ./src/H5HL.c ./src/H5O.c ./src/H5R.c ./src/H5Sall.c ./src/H5Shyper.c ./src/H5Smpio.c ./src/H5Spoint.c ./src/H5Sprivate.h ./test/big.c ./test/h5test.c ./test/istore.c ./testpar/t_dset.c ./testpar/t_file.c ./tools/h5debug.c ./tools/h5ls.c Modified to work with the virtual file layer by calling H5FD_* functions instead of H5F_low_* functions and by passing file access and data transfer properties by object ID instead of pointer. Changed H5D_transfer_t to H5FD_mpio_xfer_t since the COLLECTIVE vs. INDEPENDENT transfer mode is specific to the MPIO file driver. Moved MPIO-specific stuff into the MPIO driver. ./src/H5B.c ./src/H5D.c ./src/H5Fprivate.h The H5F_mpio_* private functions were renamed and placed in the H5FDmpio driver except those which appeared in H5Smpio.c. ./src/H5E.c ./src/H5Epublic.h Added major error number H5E_VFL for virtual file layer related errors. ./src/H5F.c ./src/H5Fprivate.h Changed the logic that controls whether the boot block is written. Instead of assuming that the first call to write the boot block is only to allocate space, I've added a function argument which makes this explicit. Changed the way files are compared so that a driver-defined comparison function can be called. Files which belong to different drivers are always considered different. Removed H5F_driver_t since file drivers are now identified by object ID instead of a special non-user-extendible datatype. Removed all the hard-coded low-level file properties which have been replaced by the various file drivers. ./src/H5I.c ./src/H5Iprivate.h Added the H5I_inc_ref() which was removed a few months ago since we finally have a use for it. ./src/H5Ipublic.h Added the H5I_VFL object ID type to identify file drivers in the virtual file layer. ./src/H5MF.c ./src/H5MFprivate.h Moved all the allocation/deallocation code into the virtual file layer which allows file drivers to override much of it. ./src/H5P.c ./src/H5Ppublic.h Moved file driver-specific code into the various file driver files. The H5Pcopy() and H5Pclose() functions make calls into the virtual file driver to manage the memory for driver-specific file access and data transfer properties. ./src/H5private.h ./src/H5public.h The `haddr_t' type is now public. ./test/tfile.c Added a few more comments.
* [svn-r1554] Changed it to use the tflops predefined __PUMAGON__ to identifyAlbert Cheng1999-08-021-1/+1
| | | | the tflops system.
* [svn-r1515] Changes since 19990715Robb Matzke1999-07-191-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in [1.3] ./examples/Makefile.in [1.3] ./pablo/Makefile.in [1.3] ./src/Makefile.in [1.3] ./test/Makefile.in [1.3] ./testpar/Makefile.in [1.3] ./tools/Makefile.in [1.3] ./config/commence.in [1.3] ./config/conclude.in [1.3] ./config/depend.in [1.3] Added a `.PATH' target for Irix pmake which is identical to the VPATH used by most other `make' programs. Irix 6.5 (or 6.4?) and later `make' ignores VPATH. Started all beginning-of-line comments with `##' instead of just `#' because Irix `pmake' barfs on things like the following because it sees the `# if' as a directive: # make will barf on the following line # if running Irix pmake ./config/commence.in [1.3] Added empty definitions for optional `make' macros because Irix pmake complains if it sees a macro which has never been defined. The main body of the Makefiles can redefine these macros to whatever they need.
* [svn-r1465] src/H5Fmpio.c:Albert Cheng1999-07-121-2/+0
| | | | | | | | | | | | | Removed the unnecessary #include of mpi.h and mpio.h. (They are included already in H5public.h when applicable.) Changed couple debug printing to be controlled like the others. src/H5public.h: Officially, mpio.h should be in mpi.h but MPIO are not always supported by the vendor yet. Make the #include of mpio.h conditional when it is not in mpi.h. testpar/testphdf5.h: Removed the unnecessary #include of mpi.h and mpio.h. (They are included already in H5public.h when applicable.)
* [svn-r1446] Makefile.ibmsp is no longer needed. Configure generates the rightAlbert Cheng1999-07-081-95/+0
| | | | Makefile for it.
* [svn-r1417] t_mpi.c:Albert Cheng1999-07-034-7/+40
| | | | | | | | | | Changed it to skip the test instead of aborting when there is not enough processes to do the test. Also corrected an error in the error reporting printf statement. t_dset.c: testphdf5.c: testphdf5.h: Added option for specifying chunk dimensions.
* [svn-r1398] Purpose:Albert Cheng1999-06-304-90/+176
| | | | | | | | | | | | | | | | new feature Makefile.in: Added the dependence of *.c on the testphdf5.h t_dset.c: testphdf5.c: testphdf5.h: testphdf5 now takes optional arguements for dataset dimension sizes. That allows testing with different dimension sizes without recompiling the whole thing. Platform tested: O2K
* [svn-r1388] No longer needed because configure creates the right Makefile now.Albert Cheng1999-06-262-203/+0
|
* [svn-r1222] Cleaned up the code in testphdf5.c, mostly in the -f parsing area.Albert Cheng1999-04-272-51/+34
| | | | | Eliminated most compiler complains. Changed Tflops to use the /pfs_grande file systems. (Old /pfs is retired.)
* [svn-r1218] Added string.h since it is needed for those strxxx calls.Albert Cheng1999-04-261-0/+1
|
* [svn-r1217] Changes since 19990426Robb Matzke1999-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./config/commence.in ./examples/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Fixed some dependency problems in Makefiles. If the library version is updated then everything gets recompiled. ./src/H5G.c ./src/H5R.c Failure return value for object type functions is now H5G_UNKNOWN as documented. ./src/H5Shyper.c ./src/H5Spoint.c Fixed an unused argument warning. ./tools/h5debug.c Fixed a call to H5F_block_read() since the 4th argument is different now. ./tools/h5ls.c Added a space between the object name and class to make the output readable when the object name is longer than 24 characters. C
* [svn-r1177] Changed HDmalloc to malloc to avoid the need of using H5private.h.Albert Cheng1999-04-082-6/+3
| | | | | Removed the #ifndef MPIOTEST. MPIO tests should run all the time now that the test is more efficient.
* [svn-r1151] Changes since 19990318Robb Matzke1999-03-191-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------- ./Makefile.in ./configure.in ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./config/commence.in ./config/conclude.in ./config/dec-osf4.x ./config/depend.in ./config/freebsd ./config/linux-gnu ./config/linux-gnulibc1 ./config/linux-gnulibc2 ./config/solaris2.x ./examples/Makefile.in ./src/Makefile.in ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in ./tools/testh5dump.sh Changes that allow hdf5 to be configured and compiled in a directory other than the source directory. This is especially useful if you want to concurrently compile with different compilers and/or compile flags, or if the hdf5 source is on read-only media like a CDROM. The changes were surprisingly easy ;-) Here's what you can do now... $ mkdir /tmp/build1 # or something $ cd /tmp/build1 $ /cdrom/hdf5/configure # where ever the source is $ make Paul, you'll have to change the testh5toh4 script similar to the way I changed testh5dump.sh. I started working on it but then gave up because of a number of problems: (1) I had to comment out all the tests that let h5toh4 choose the output file name because it always tried to put the output file in the same directory as the input file, (2) if path names are used during the h4 dump then they interfere with the diff. The test works fine when run in the source directory, but try this instead: $ gunzip <hdf5-1.1.67.tar.gz |tar xf - $ chmod -R ugo-w hdf5-1.1.67 $ mkdir build $ cd build $ ../hdf5-1.1.67/configure $ make check Dan, I didn't modify the pablo/Makefile.in because I have no way to test it. I think all you need to do is add a couple lines before the @COMMENCE@ line and add a couple search directories for header files. Anyway, it seems like almost an exact duplicate of the src/Makefile.in, so it shouldn't be a problem... ./Makefile.in Removes a few more temporary files during make clean and distclean. ./configure.in I fixed the creation of the time-stamp files so that the initial make doesn't have to regenerated all the makefiles (only GNU make users will see any change). ./src/H5R.c Changed a return type from `intn' to `int' for an API function. ./src/H5detect.c Added the volatile qualifier to a couple more variables. ./tools/h5tools.c Fixed a compiler warning about an unused local. ./tools/h5toh4.c Initialized `optind' to 1 because it's zero on my system. It should always be one on a unix system. ./tools/testh5toh4 Redirected "broken pipe" messages to /dev/null so outut is formatted correctly.
* [svn-r1149] ./configure.inRobb Matzke1999-03-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ./configure [REGENERATED] ./src/H5config.h.in [REGENERATED] ./src/H5private.h Temporarily commented out the code that tries to link a simple MPI-IO application because I'm not sure how to pass $LDFLAGS and $LIBS to the compiler. Removed the `--enable-parallel=ibm' switch because the library we link with is either -lmpcc or -lmpcc_r but not both. The only way to tell is to see what compiler was specified (mpcc or mpcc_r) but if that compiler is specified then we don't need any libraries (the compiler script supplies them). That leaves just two choices: the user must use a compiler script: CC=mpcc ./configure or the user must state which library is desired: LDFLAGS='-lmpcc' ./configure --enable-parallel Checks for <setjmp.h>, longjmp(), and signal(). We don't check for setjmp() because it could be a macro (in fact, Posix requires it to be a macro) and if longjmp() is present then setjmp() is probably present too ;-) ./src/H5detect.c The alignment detection loop uses SIGBUS and setjmp/longjmp instead of fork/wait in order to get around bugs with forking in conjunction with mpich. This hasn't been tested on the SP-2 yet but it does work on the DEC Alpha. ./test/Makefile.in ./testpar/Makefile.in ./tools/Makefile.in Changed the order that libraries are linked so -lhdf5 is always before $LDFLAGS.
generated by cgit v0.12 at 2024-08-29 23:06:02 (GMT)