summaryrefslogtreecommitdiffstats
path: root/tools/Makefile.in
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r19839] Updated to libtool v 2.4, autoconf 2.68 and m4-1.4.15.Larry Knox2010-11-231-0/+3
| | | | Tested with h5committest on amani, heiwa, and jam.
* [svn-r19506] Bring changes from revisions 19408, 19421, and 19442 from ↵Larry Knox2010-10-041-5/+15
| | | | | | branches/hdf5_1_8 to trunk. These revisions reorganize the compile scripts using h5cc.in, h5fc.in, and h5c++.in, add checks for installed examples to the scripts that run them after installation, and add DESTDIR for install as needed for RPMs. Tested on amani, heiwa and jam by h5committest and with CYGWIN.
* [svn-r19366] Updated autoconf to version 2.6.7, libtool to version 2.2.10, ↵Larry Knox2010-09-101-1/+1
| | | | | | and m4 to version 1.4.14. Also added m4 directory for m4 macros according to autoconf suggestion. Tested with h5committest on amani, jam, and heiwa, and on linew.
* [svn-r19059] Brought changes from hdf5_1_8 to add version information for ↵Larry Knox2010-07-091-0/+2
| | | | | | fortran and c++ compilers in libhdf5.settings file and configure output (r18836), to install examples as part of make install (r18680), and to provide scripts to compile and run the examples after they are installed (r18817). Tested with new/h5committest on amani, heiwa, and jam.
* [svn-r18709] Purpose:Mike McGreevy2010-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Improve configure's large-file support control. Description: Modified configure to now attempt to add defines necessary for supporting largefiles on all systems, instead of solely on linux. This is in response to user requests to enable largefile support on Solaris by default, as well as to give extra control on AIX (instead of just jamming the necessary flag into the config files). The old --enable-linux-lfs flag has been removed in favor of the --enable-largefile flag (enabled by default), which can be used on all platforms. On systems where large files cannot be supported in this manner, configure will report as such. Tested: h5committest AIX (NCSA's blue_print machine) duty, liberty, and linew.
* [svn-r18579] Purpose:Mike McGreevy2010-04-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Autotool Upgrade / Libtool Bug Fix Description: Updated autotools referenced in bin/reconfigure as follows: Autoconf 2.64 --> Autoconf 2.65 Automake 1.11 --> Automake 1.11.1 Libtool 2.2.6a --> Libtool 2.2.6b-mcg The referenced libtool version is a custom version of 2.2.6b. It has been tweaked to fix a bug in libtool that occurs when using PGI 10.0 compilers. A check incorrectly categorizes the C++ compiler as version 1.0 instead of 10.0, and the link line is subsequently set up incorrectly and fails to compile. A patch has been made available and will be included in the next release of libtool, but in the meantime I've applied the patch to a custom installation as indicated above. This bin/reconfigure now references the custom installation, and the resulting configure script will correctly categorize the PGI 10.0 C++ compiler. Ran bin/reconfigure to regenerate configure and makefiles. Tested: jam and amani with PGI 10.0 compilers. h5committest
* [svn-r18107] bug 1673:Albert Cheng2010-01-121-4/+4
| | | | | | | | | | | | | | The mixed use of RUNTEST (original) and RUNTESTS (new) caused confusion. E.g., the timings in test/ was still using the old $RUNTEST. It made more sense to use $RUNTEST which is used by the dejagnu feature of automake. So, I changed all $RUNTEST or $RUNTESTS to $RUNEXEC. config/commence.am & config/conclude.am are the two files that got changes. Also fixed an error in test/Makefile.am. The rest are changed by bin/reconfigure. Tested: h5committested.
* [svn-r17616] Purpose:Mike McGreevy2009-10-081-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CFLAGS overhaul Description: Modified the way configure handles CFLAGS. (note: all changes also apply to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS). 1. The configure process will now always preserve a user's CFLAGS environment variable setup. Any additional flags necessary for compilation added at configure time will be passed into the Makefiles as AM_CFLAGS, which is an automake construct to be used in addition to CFLAGS. This will allow a user to have the final say, as CFLAGS will always appear later in the compile line than AM_CFLAGS. Additionally, setting CFLAGS during make will no longer completely erase all flags set by configure, since they're maintained in AM_CFLAGS. 2. Additionally, where possible, flags previously being assigned directly into CFLAGS (and thus propagating into h5cc) have now been redirected into H5_CFLAGS, so they're used ONLY for compiling hdf5, and not embedded into the h5cc wrapper script as well. *Note that H5_CFLAGS ultimately is assigned into AM_CFLAGS for use in the Makefiles. Complete description of changes and build process will be included in a Configure Document that Elena and I are working on. 3. Removed unsupported config files. This includes: config/dec-osf* config/hpux11.00 config/irix5.x config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* 4. Modified configure summary to display additional values. Specifically, appropriate AM_* variables are being shown, as well as H5_FCFLAGS and H5_CXXFLAGS, which were for some reason not already present. Tested: - H5committest - Tested on all THG / NCSA machines, using several combinations of the more prominent configure options (c++, fortran, szip, threadsafe, parallel, et cetera). (Thanks to Quincey for rysnc testing setup!) - With regards to new automated testing, anything *necessary* for compilation will be caught by the daily tests as it stands now. (i.e., if LDFLAGS is not properly set when szip is used, linking will fail). Additionally, with regards to which flags get into h5cc, if any *necessary* flags have been improperly removed, then daily tests should fail during make installcheck. Additional machine-specific desired behaviors and/or checks may have to be set up separately within the daily tests, so this is something to work on.
* [svn-r17345] Purpose:Mike McGreevy2009-08-121-32/+102
| | | | | | | | | | | | | | | | | | | | | | | | Updating autotools Description: Installed new autotools and used them to reconfigure HDF5. - Automake upgraded to 1.11 - Autoconf upgraded to 2.64 - bin/reconfigure script edited to use new versions (on jam), and run to generate new configure script and Makefile.in's. - configure.in script edited to add "_cv_" to all AC_CACHE_VAL strings (in order to comply with new autoconf standard). Tested: Tested on machines jam, smirom, liberty, linew. Tested w/ features c++, fortran, parallel. Tested w/ compilers gcc, pgcc, icc. Further testing via Daily Tests should catch any other outliers. Upon passing DT's, I'll propogate the new tools into 1.8, hdf4, et cetera.
* [svn-r16792] Description:Mike McGreevy2009-04-201-4/+4
| | | | | | | | | | | | - Updated bin/reconfigure to use latest version of automake (1.10.2). Re-generated Makefile.in's by running bin/reconfigure. - Added libtool version numbers to c++, fortran, hl, hl c++, and hl fortran libraries. Tested: jam, liberty, smirom
* [svn-r16561] Purpose:Mike McGreevy2009-03-101-3/+3
| | | | | | | | | | | | | | | | | | Bug Fix Description: Fixing BZ #1381. The --includedir=DIR configure option, which is used to specify the installation location of C header files, did not work correctly as the path was hard-coded in config/commence.am. I'm presuming this is because an older version of automake didn't know where to put c header files. In any case, removing this line now defaults the includedir to the same directory that it is currently hard-coded to, and also fixes the configure flag to allow customization of this value. Tested: jam, liberty
* [svn-r16518] have 2 expected outputs for 2 h5ls runs depending if run on a ↵Pedro Vicente Nunes2009-02-261-0/+1
| | | | | | | big or little endian machine. Configure.in was modified to export a variable carrying endianess information to testh5ls.sh. This script then compares the current run with 2 expected outputs, one for a big-endian machine (linew was used to generate the output), other for little endian (jam was used to generate the output) the way h5ls prints types, it starts searching for NATIVE types first. One solution would be h5ls not to detect these native types, using for example the same print datatype function that h5dump does, that would make the output look the same on all platforms ("32-bit little-endian integer" would be printed instead). Drawback, this "native" information would not be available. Other solution is to have not one but 2 expected outputs and make the shell script detect the endianess and compare with one output or other tested: h5committest
* [svn-r15942] Purpose: Bug Fixes and Libtool UpgradeMike McGreevy2008-10-241-7/+8
| | | | | | | | | | | | | | | | | | Description: - Remove need to set LD_LIBRARY_PATH when using shared szip library. - Libtool 2.2.6a is now used to generate libraries. - 'make check install' dependency bug is fixed, and should no longer break the build. - removed hard coding of shell in config/commence.am, as this causes problems on Solaris with the new version of libtool. - RELEASE.txt with appropriate changes. Tested: - kagiso, smirom, linew (merged from 1.8, pretty quick tests)
* [svn-r15187] Purpose: Disabling h52jpeg directory from being built while ↵Mike McGreevy2008-06-101-1/+1
| | | | | | | | issues surrounding its location and its dependencies are worked out. Tested: kagiso
* [svn-r15184] added the configure and Makefile changes to build h52jpeg in ↵Pedro Vicente Nunes2008-06-091-1/+1
| | | | | | unix systems tested: linux, solaris
* [svn-r15036] Bug fix.Albert Cheng2008-05-191-4/+4
| | | | | | | | | | | | | | | | | | | Description: The fortran Makefile.am used HDF_FORTRAN to indicate it is part of the Fortran API source so that conclude.am will give fortran api prefix in the test output. The symbox HDF_FORTRAN is also used in configure for a different purpose (indicated --enable-fortran). They conflicted. Similar problem for the symbol HDF_CXX. Solution: Changed all the involved Makefile.am to use "FORTRAN_API" instead. It is a more appropriate name. Same for CXX_API. Along the way, discovered that the Makefile.am of hl/fortran/test and hl/cxx/test did not have those symbols at all. Added them in. Platform tested: Kagiso only. It is a trivia change.
* [svn-r15007] Purpose: configure cleanupMike McGreevy2008-05-151-1/+0
| | | | | | | Description: cleaning up configure related to removal of --disable-hsizet flag, which we no longer support. Tested: kagiso
* [svn-r15003] Purpose:Albert Cheng2008-05-151-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improvement. Description: src/libhdf5.settings was the initial configure summary and is installed. Then configure is changed to dump a summary of the configure settings to the output and also append it to src/libhdf5.settings. That created two different output formats and duplicated information. This is the initial attempt to clean up this confusion and unify the output format. It is decided to use the src/libhdf5.settings template as the unified means. This requires more macros symbols be defined. The following symbols are all related to generating the src/libhdf5.settings file. AC_SUBST(EXTERNAL_FILTERS) AC_SUBST(MPE) MPE=no AC_SUBST(STATIC_EXEC) STATIC_EXEC=no AC_SUBST(HDF_FORTRAN) HDF_FORTRAN=no AC_SUBST(FC) HDF_FORTRAN=no AC_SUBST(HDF_CXX) HDF_CXX=no AC_SUBST(CXX) HDF_CXX=no AC_SUBST(HDF5_HL) HDF5_HL=yes AC_SUBST(GPFS) GPFS=no AC_SUBST(LINUX_LFS) LINUX_LFS=no AC_SUBST(INSTRUMENT) INSTRUMENT=no AC_SUBST(CODESTACK) CODESTACK=no AC_SUBST(HAVE_DMALLOC) HAVE_DMALLOC=no AC_SUBST(DIRECT_VFD) DIRECT_VFD=no AC_SUBST(THREADSAFE) THREADSAFE=no AC_SUBST(STATIC_SHARED) AC_SUBST(enable_shared) AC_SUBST(enable_static) AC_SUBST(UNAME_INFO) UNAME_INFO=`uname -a` The src/libhdf5.settings.in has CONDITIONAL's added to it too. The untrue conditions turned into a "#" and these lines are cleaned by the post processing script. Platform tested: h5committest on kagiso, smirom and linew.
* [svn-r14933] Purpose: Updating HDF5 to use automake 1.10.1 and libtool 2.2.2Mike McGreevy2008-05-051-13/+17
| | | | | | | | | | | | | | | | | | Description: Applying update to autotools that was applied to 1.8 a couple of weeks ago to the trunk. Updated bin/reconfigure script to reflect the new versions of libtool and automake in the /home1/packages/ directory. Rearranged configure.in script. When using libtool 2.2.2, the libtool script doesn't generate until later in the configuration process, so I had to move a test that parsed through the libtool script to a point after where it was actually being generated. Ran libtoolize on the project, and ran bin/reconfigure to regenerate configure and Makefile.in's throughout. Tested: kagiso, smirom, linew (h5committest)
* [svn-r14402] Description:Quincey Koziol2008-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add work-around to allow reading files that were produced with a buggy earlier version of the library, which could create objects with the wrong object header message count. There is now a configure flag "--enable-strict-format-checks" which triggers a failure on reading a file with this sort of corruption (when enabled) and allows the object to be read (when disabled). The default value for the "strict-format-checks" flag is yes when the "debug" flag is enabled and no when the "debug" flag is disabled. Note that if strict format checks are disabled (allowing objects with this particular kind of corruption to be read) and the file is opened with write access, the library will re-write the object header for the corrupt object with the correct # of object header messages. This closes bugzilla bug #1010. Tested on: FreeBSD/32 6.2 (duty) in debug mode FreeBSD/64 6.2 (liberty) w/C++ & FORTRAN, in debug mode Linux/32 2.6 (kagiso) w/PGI compilers, w/C++ & FORTRAN, w/threadsafe, in debug mode Linux/64-amd64 2.6 (smirom) w/default API=1.6.x, w/C++ & FORTRAN, in production mode Linux/64-ia64 2.6 (cobalt) w/Intel compilers, w/C++ & FORTRAN, in production mode Solaris/32 2.10 (linew) w/deprecated symbols disabled, w/C++ & FORTRAN, w/szip filter, in production mode Mac OS X/32 10.4.10 (amazon) in debug mode Linux/64-ia64 2.4 (tg-login3) w/parallel, w/FORTRAN, in production mode
* [svn-r14023] Purpose:Vailin Choi2007-07-271-1/+1
| | | | | | | | | | reorganization. Description: move the h5stat tool into its own directory. Platform tested: kagiso.
* [svn-r13972] Description:Quincey Koziol2007-07-131-0/+1
| | | | | | | | | Add --with-default-api-version configure flag. Tested on: Mac OS X/32 10.4.10 (amazon) FreeBSD/32 6.2 (duty) Linux/32 2.6 (kagiso)
* [svn-r13971] Description:Quincey Koziol2007-07-121-0/+1
| | | | | | | | | | | | | | Add --enable-deprecated-symbols configure option, to allow users to remove deprecated public API symbols at configure time. Add bin/make_vers script to bin/reconfigure actions. Run bin/reconfigure to regenerate autotool components. Tested on: Mac OS X/32 10.4.10 (amazon) FreeBSD/32 6.2 (duty) Linux/32 2.6 (kagiso)
* [svn-r13928] Purpose: 1) Moving H5_CXX_HAVE_OFFSETOF macro to ↵Mike McGreevy2007-06-291-2/+1
| | | | | | | | | | src/H5pubconf.h file. 2) Removing configuration of c++/src/H5cxx_pubconf.h file. Reasoning: the additional pubconf file caused compilation complications, this is cleaner. Tested: kagiso, smirom
* [svn-r13925] Purpose: intermediate checkin for offsetof fix for PGI compiler.Mike McGreevy2007-06-281-1/+2
| | | | | | | | | | Description: added new configuration to generate a pubconf file in the c++/src directory, H5cxx_pubconf.h. When C++ compiler recognizes 'offsetof', the macro H5_CXX_HAVE_OFFSETOF is defined in the new pubconf file. tested: kagiso, smirom
* [svn-r13846] Purpose: To remove changes from version #13839 (regarding ↵Mike McGreevy2007-06-081-1/+0
| | | | | | | | DEFAULT_VFD). Description: Changes made during this checkin need to be greatly modified, so I'm removing them now rather than leaving them in and fixing them later.
* [svn-r13839] Purpose: creation of a DEFAULT_VFD macro in the ↵Mike McGreevy2007-06-071-0/+1
| | | | | | | | | | | test/Makefile. Description: a new configure flag has been created that will now set a macro in the test/Makefile. The flag is with-default-vfd=. When set to a virtual file driver (e.g. "--with-default-vfd=sec2"), the macro DEFAULT_VFD will hold this value. Tested: kagiso, smirom, linew
* [svn-r13829] Some systems (only SGI Altix ProPack 4 discovered so far) ↵Raymond Lu2007-06-021-0/+1
| | | | | | | | | | | | doesn't return correct file size from MPI_File_get_size. Bypass this problem by replacing it with stat. Add an option --disable-mpi-size in configure to indicate this function doesn't work properly. Add a test in testpar/t_mpi.c, too. If it returns wrong file size, print out a warning. Tested on kagiso (parallel) because already tested the same change to v1.6 on several platforms (kagiso, cobalt, copper, and sol).
* [svn-r13815] Description:Quincey Koziol2007-05-291-0/+2
| | | | Regenerate configuration files after latest checkin
* [svn-r13616] This check-in updates the bin/reconfigure file to point to the ↵Mike McGreevy2007-04-091-76/+64
| | | | | | | | most recent versions of the autotools. Updated autotool versions are: autoconf 2.61, automake 1.10.0, and libtool 1.5.22. Tested on kagiso.
* [svn-r13418] Cleaned up some old paths in config/commence.am and removed ↵James Laird2007-02-271-7/+7
| | | | | | | | some comments in the template file config/Makefile.am.blank. This is just a cleanup checkin. Tested on kagiso.
* [svn-r13379] Added 'make help' target. This actually runs a script, ↵James Laird2007-02-231-1/+4
| | | | | | | | bin/makehelp (formatting the output in the makefile was pretty hard). Tested that make still works on kagiso; no code changes at all.
* [svn-r13365] Bug fix.Albert Cheng2007-02-211-26/+0
| | | | | | | | | | | | Description: Multiple copies of Copyright appeared in Makefile.in. This was due to automake copying the copyright right in the included files such as config/commence.am. Solution: Automake treats double hashes as comments and does not copy them to Makefile.in. Changed all the copyright notices in config/*.am to use double hashes for the Copyright right notice. Tested: kagiso via bin/reconfigure.
* [svn-r13359] Fixed a bug where the -shlib flag for h5cc would end up on the ↵James Laird2007-02-201-5/+31
| | | | | | | | Dependency line in the Makefile. Makefile change only. Tested on kagiso, to be used to test on cobalt.
* [svn-r13264] Updated Makefile.am with new THG copyright notice.Albert Cheng2007-02-071-2/+3
| | | | Ran reconfigure to generate the Makefile.in files.
* [svn-r13181] Added a configure check to prevent a failure on Cygwin.James Laird2007-01-231-1/+1
| | | | | | | | | | | | | | It seems that while Cygwin supports the time command, it has trouble with the syntax srcdir="../../hdf5/test" time ./testhdf5 and complains. The solution is to test the above case in configure and not to use the time command if it fails; Cygwin is fine with srcdir="../../hdf5/test" ./testhdf5 Tested on Cygwin and kagiso. This feature shouldn't be a major compatibility problem since every platform but Cygwin is already fine with the current syntax.
* [svn-r12929] Hopefully this really is a fix for the tg-login errors.James Laird2006-11-161-1/+1
| | | | | | | | | | | The version of libtool used by HDF5 isn't directly affected by the reconfigure script; instead, libtoolize --force must be used by hand. Libtool was the source of the problem, so rolling its version back to 1.5.14 should solve the issue (at least temporarily). Reconfigure should still work on both heping and kagiso. Tested on heping, kagiso, and tg-login3.
* [svn-r12911] Backed up to previous versions of automake and libtool. ↵James Laird2006-11-141-1/+1
| | | | | | | | Hopefully this will fix issues on tg-login3. bin/reconfigure should still work on both heping/mir and kagiso.
* [svn-r12887] A fix for linking issues.James Laird2006-11-101-0/+1
| | | | | | | | | | | | Should disable linking against shared libraries in Fortran for compilers that don't support shared libraries. Should also fix problem when the wrong Fortran file extension was specified. If these changes don't solve the Daily Test issues, I'll look at backing out the autotool version change until I have time to fix them. Tested on heping, kagiso, juniper.
* [svn-r12882] Changed bin/reconfigure to work on kagiso as well as on AFS ↵James Laird2006-11-081-5/+9
| | | | | | | | Linux machines. Updated to the latest versions of autotools. Tested on kagiso, heping, and juniper. Let me know if you have any problems.
* [svn-r12741] Added support for direct I/O to check-vfd. The direct VFD is ↵James Laird2006-10-101-2/+2
| | | | | | | | | | only tested if it is enabled. Added Direct VFD status to the configure summary. Removed a line left over from pablo support. Oops!
* [svn-r12715] Incorporated a user-submitted patch to better detect the 'tr' ↵James Laird2006-10-031-0/+1
| | | | | | | | | | | | utility and quote its arguments. Also checks for the 'socket' library on Solaris. If this patch passes the Daily Tests and makes the user happy, I'll port it back to the 1.6 branch. Tested on mir and sol.
* [svn-r12668] Description:Quincey Koziol2006-09-151-1/+1
| | | | | | | Re-run 'bin/reconfigure' script after recent checkins Tested on: none - shouldn't have any affect on compilation
* [svn-r12608] Checked in External Link C examples.James Laird2006-08-221-1/+1
| | | | | | | | Since these examples need to follow filesystem paths, the Makefiles need to create directories in the examples directory; added this to the Makefile.am. Tested on Windows, mir, juniper
* [svn-r12584] Mentioned VFD in test output to make it easier to tell which ↵James Laird2006-08-171-7/+6
| | | | | | | | | VFD is being used when a test is run. Running reconfigure also regenerated error header files (because someone edited them manually?).
* [svn-r12519] Fixed "make check-vfd"James Laird2006-07-311-2/+3
| | | | | | | | | | "make check-vfd" will now run all tests in the test directory with different file drivers (at least, all of those tests that use the testing framework's FAPL). Tests that fail will be skipped. This is not a perfect fix, but is better than nothing. Along with this change, check-vfd should be added to the Daily Tests.
* [svn-r12482] new tool h5copyPedro Vicente Nunes2006-07-191-1/+1
| | | | | | | | it uses the API function H5Gcopy to copy groups and datasets from file to file, read from a command line note: the test script is not finished yet tested on heping, copper, shanti
* [svn-r12431] Purpose:James Laird2006-06-211-15/+5
| | | | | | | | | | | | | | Configuration feature Description: 'make install' now tests both static and shared libraries if both are installed. Solution: Previously, shared libraries were only tested when static libraries were not installed. Also cleaned up line in commence.am that was including HL library in all Makefiles. Platforms tested: mir (Makefile change only)
* [svn-r12411] Purpose:James Laird2006-06-131-0/+1
| | | | | | | | | | | | | | Bug fix - bugzilla #552 Description: On Cray X1, trying to use : as an argument confused the system. Solution: Added a test in configure to see if : as an argument is bad. If so, skipped the test. Platforms tested: mir, Cray X1 (change to configure only)
* [svn-r12358] Purpose:Albert Cheng2006-05-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug fix. Description: The ${TR}, though avoid the error, is inconvenient. It is needed because configure.in use the char range in the style of 'a-z'. The other style of '[a-z]' is more commonly accepted by all tr but autoconf tends to strip away [], making the syntax rather clumsy. Solution: Learned from autoconf that it avoids the use of character range by just spell all the letters out. Changed our tr commands to use those variables defined by autoconf. Also removed the definition of ${TR} since it will cause inconsistancy when autoconf also use plain 'tr' in its generated code. The Makefile.in are changed because the elimination of ${TR} from configure triggered its removal from all Makefil.in. That is okay because ${TR} is not used at all in Makefile. Platforms tested: h5committested. (sol failed to connected). also tested in shanti using both /usr/ucb/tr and /bin/tr (the bad one before.) Misc. update: Updated both INSTALL and RELEASE files.
generated by cgit v0.12 at 2024-11-06 23:45:56 (GMT)