summaryrefslogtreecommitdiffstats
path: root/tools/lib
Commit message (Collapse)AuthorAgeFilesLines
* [svn-r10475] Purpose:James Laird2005-03-291-0/+2
| | | | | | | | | | | | | | | | | Feature - conditional compilation Description: SRB file driver and tests are now compiled only when SRB is enabled (using --with-srb during configure). Solution: Added an automake conditional in configure.in, altered Makefiles.am in src and test directories to depend on that conditional. This should make a nice example for posterity to add conditionally compiled sources. Platforms tested: heping (only configure change)
* [svn-r10459] James Laird2005-03-281-0/+1
| | | | | | | | | | | | | | | | | Purpose: Added C++ wrapper for Packet Table API. Description: Added macro for high-level C++ library (LIBH5CPP_HL), which changes every Makefile.in. Added directories for high-level C++ library (though currently only Packet Table API is supported). Added both C++ source and tests. Platforms tested: sleipnir, mir, modi4 Misc. update:
* [svn-r10250] Purpose:Albert Cheng2005-03-211-1/+1
| | | | | | | | | | Replaced tmpfile() call with system macro HDtmpfile so that it is easier to customize for systems. Platforms tested: in heping. Misc. update:
* [svn-r10207] Purpose:Leon Arber2005-03-141-1/+1
| | | | | | | | | | | | | | | Bug fix Description: Typo in #ifdef to check for snprintf functionality. Solution: That should have been H5_VSNPRINTF_WORKS. Platforms tested: heping, modi4 Misc. update:
* [svn-r10206] Leon Arber2005-03-132-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Purpose: Bug fix. Description: ph5diff fails on modi4 due to the way snprintf works on IRIX. Solution: The C99 standard says that, if there isn't enough room in the string, snprintf should return the number of characters that would have been written to the output string if there were enough room. The snprintf on modi4 would return the number of characters that is was able to write succesfully to the string if space ran out. The ph5diff logic that checks if the output buffer was full did not handle this sort of return value correctly. Used VSNPRINTF_WORKS from configure test to check how snprintf works and do the logic accordingly. Platforms tested: modi4 Misc. update:
* [svn-r10170] Purpose:Leon Arber2005-03-093-48/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug Fixes Description: Fixes for several bugs, including dumping of excess output to a temporary file, fix for printing hsize_t datatype, and the long awaited fix for intermixed output. Solution: Fix 1: Overflow file Previously, any output that a worker task made was buffered locally in memory, up to a point. Any output beyond the size of the buffer (used to be 10k) was discarded. Now, the memory buffer size has been changed to 1k and any output beyond this amount is sent a temporary file. This way, no output is lost and memory usage is kept under control. The temporary file is deleted as soon as a worker task finishes sending its contents to the manager. Fix 2: hsize_t printing Printing of the hsize_t datatype used to be handled by %Hu passed to HDfprintf. However, there is no corresponding HDvsnprintf that is able to print hsize_t types. These are now printed with the aid of H5_PRINTF_LL_WIDTH. Fix 3: Intermixed output fix Intermixed output would occur on some machines (although I haven't seen it happen for a while) due to the unpredictability of the underlying network and the speed at which various message would travel. This has been fixed by having all output send to the manager for printing. The worker tasks no longer print the output themselves upon receipt of a token, but instead send that data to the manager. Platforms tested: heping, eirene, tg-login (the only place that seems to still experience intermixed output every now and then) Misc. update:
* [svn-r10158] Purpose:James Laird2005-03-071-148/+244
| | | | | | | | | | | | | | | | | | | | | | Automake version upgrade Description: Upgraded automake version from 1.6.2 to 1.9.5. Changed bin/reconfigure script to use automake 1.9.5. Changed configure.in and Makefiles to use new FCFLAGS and FC variables instead of FFLAGS and F9X. Automake and configure should now do the lion's share of the work supporting Fortran 9X; macros in acsite.m4 are now mostly unused (will be cleaned later). Altered how configure handles pmake; now root-level Makefile.in is processed by bin/reconfigure to have a .MAKEFLAGS target, since automake no longer allows us to define unused variables. Configure now always checks for C++ compiler even if it is not used, since automake thinks this is the Right Thing To Do and will break otherwise. Platforms tested: Sol, copper, heping, mir, sleipnir, eirene, pommier, kelgia, modi4.
* [svn-r10136] Purpose:Albert Cheng2005-03-031-9/+15
| | | | | | | | | | | | | | | | Bug fix. Description: MPI_LONG_LONG, which is not standard yet, was used to pass the nubmer of differences found. This was needed because number of differences is defined as type hsize_t which can be arbitary large such that there is no MPI type that matches it. The value is passed between processes as an array of bytes in order to be portable. But this may not work in non-homogeneous MPI environments. This fix was actually Leon's idea. Platforms tested: Tested in QSC in which this failed.
* [svn-r10123] Purpose:Albert Cheng2005-03-021-3/+0
| | | | | | | | | | | | | | | | | | | | | | | Removed GASS configuration and software packages associated with it. The following software are no longer configurable. checking for main in -lcrypto... yes checking for SSL_get_version in -lssl... yes checking globus_common.h usability... yes checking globus_common.h presence... yes checking for globus_common.h... yes checking for globus_module_activate in -lglobus_common... yes checking for main in -lglobus_gass_cache... yes checking for main in -lglobus_gaa... yes checking for main in -lglobus_gss... yes checking for main in -lglobus_gss_assist... yes checking for main in -lglobus_io... yes checking for main in -lglobus_gass_transfer_assist... yes checking for main in -lglobus_gass_transfer... yes checking for globus_gass_open in -lglobus_gass_file... yes Platforms tested: h5committested (but copper was down.) tested in modi4 too.
* [svn-r10066] Purpose:James Laird2005-02-231-0/+4
| | | | | | | | | | Libtool upgrade Description: HDF5 was using libtool 1.4.2. Upgraded to libtool 1.5.14. Platforms tested: verbena, heping, pommier, copper, modi4, arabica
* [svn-r10060] Purpose:Robert E. McGrath2005-02-212-0/+28
| | | | | | | | | | | | | | feature Description: h5dump support for scaleoffset compression Solution: Platforms tested: verbena, shanti,copper64 Misc. update:
* [svn-r10027] Purpose:Xiaowen Wu2005-02-171-0/+1
| | | | | | | | | | | | | | New feature. Description: Add the scaleoffset internal library filter. Solution: Platforms tested: heping, copper, arabica Misc. update:
* [svn-r10016] James Laird2005-02-161-1/+0
| | | | | | | | | | | | | | | | | | | Purpose: Bug fix Description: modi4 dies during build with strange errors. The root cause of these is a two-year-old hack in HDF5's libtool script that only takes effect on IRIX. Solution: Edited the libtool hack (by editing ltmain.sh) to correct a bug in the hack. Also made sure that compiler-specific DEFAULT_LIBS are used when linking. Platforms tested: sleipnir, copper, modi4, sol
* [svn-r10015] Purpose:Robert E. McGrath2005-02-161-0/+27
| | | | | | | | | | | | | feature Description: file was omitted from checkin yesterday Solution: Platforms tested: Misc. update:
* [svn-r9994] Purpose:Quincey Koziol2005-02-111-0/+1
| | | | | | | | | | | Bug fix Description: Unbreak build by adding definition for NBIT macro. Platforms tested: FreeBSD 4.11 (sleipnir) w/parallel Solaris 2.9 (shanti)
* [svn-r9993] Purpose:James Laird2005-02-112-2/+2
| | | | | | | | | | | | | | | | | | | | Bug fix Description: Arabica exhibited strange errors when linker found wrong versions of header files. This happened because include directories were given to linker in the wrong order. Solution: Move include directories from AM_CFLAGS variable to INCLUDES variable to put them before CPPFLAGS variable. Trust me, it works. This bug may also have contributed to strange errors on other platforms (kelgia?). Platforms tested: copper, sleipnir, arabica. (h5dump broke while building on arabica, but this happened in a clean checkout, too).
* [svn-r9988] Purpose:James Laird2005-02-111-15/+4
| | | | | | | | | | | | | | | | | | | | Bug fix Description: pmake (on modi4, for instance) complains about undefined variables if it is run without the -V flag, which turns those errors to warnings. Solution: Added test to configure.in to see if $MAKE will allow Makefiles with undefined variables. If not, sets -V flag in AM_MAKEFLAGS. Ensured that all custom make targets use AM_MAKEFLAGS. Also defined all variables that caused errors in top-level Makefile.am. This means that pmake can be used to build hdf5 *from the top level only*. To run make from a subdirectory, still need to use -V flag (or use make or gmake). Platforms tested: modi4, heping, copper, sleipnir
* [svn-r9969] Purpose:Leon Arber2005-02-093-5/+9
| | | | | | | | | | | | | | | | | | | Correction to previous print_manager_output bugfix Description: Although the previous bugfix did fix all the errors, it was not the correct way to fix the problem. Since the manager will only buffer output when run in parallel mode, in serial mode this function should not even be called. Solution: Wrapped print_manager_output in #define's to prevent it from being included in serial builds. Platforms tested: heping (serial + parallel) Misc. update:
* [svn-r9964] Purpose:Albert Cheng2005-02-091-0/+4
| | | | | | | | | | | | | | bug fix Description: g++ was not happy with missing protocols of external functions. Added print_manager_output(void) and phdiff_dismiss_workers(void) to the public declarations. Platforms tested: Tested in sleipnir (g++) and heping (serial, pp) Misc. update:
* [svn-r9961] Pedro Vicente Nunes2005-02-085-6/+63
| | | | | | | | | | | | | | | | | | | | | | | Purpose: bug fix, new test file Description: h5dump was not properly displaying array indices > 3D Solution: added the same algorythm and data structure that h5diff uses to calculate the array index from a element number position Platforms tested: linux solaris Misc. update:
* [svn-r9957] Purpose:Albert Cheng2005-02-081-2/+2
| | | | | | | | | | | | | | | | | | Bug fix. Description: print_manager_output was missing because it was compiled in only parallel mode. Solution: Made it available all the times. Platforms tested: h5committested. (testph5diff.sh failed in copper but that is a different error.) Also tested in heping, serial and pp. Misc. update:
* [svn-r9956] Purpose:Leon Arber2005-02-084-467/+518
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed numerous ph5diff bugs. Description: Fixed manager output printing Fixed out of order output printing Fixed test script execution problem Temporary fix for large amounts of output overflowing buffer. Solution: The manager task buffers its output. However, since the manager task never gets a print token, this output was lost. Solution: new function called print_manager_output that prints buffered output is called in places where the manager buffers its output. printf was apparently buffering output. This means that a task would sometimes print even after it had given up its print token. Added fflush() call after printf() calls, which seems to have fixed the problem. calling rsh multiple times in succession seems to overwhelm something in Linux, as it begins to refuse new connections until the old ones reset. Since each call to mpirun in the test script starts up 4 rsh sessions, the test script eventually is unable to run any further tests. Solution: Added a short delay in the testscript between successive calls to mpirun to allow old connections to reset. The 10k output buffer was of insufficient size to hold the large amounts of output generated by some of the tests. Since code to buffer to a file has not been implemented yet, a temporary fix was to increase the size of the output buffer to 50k. Platforms tested: heping Misc. update:
* [svn-r9947] Purpose:Albert Cheng2005-02-061-0/+24
| | | | | | | | | | | | | Feature Description: Added a new function, phdiff_dismiss_workers, which tells the phdiff worker processes to end. Platforms tested: Tested in heping, serial and parallel. Misc. update:
* [svn-r9930] James Laird2005-02-032-5/+8
| | | | | | | | | | | | | | | | | | Purpose: Bug fix Description: Parallel builds were breaking in tools/lib Solution: talign didn't realize it depended on libh5tools.la because its dependencies listed the full path (../../tools/lib/libh5tools.la). Changed this, and made similar changes in a couple of other directories. This checkin should also add the --foreign flag to every Makefile.in Platforms tested: sleipnir (minor change)
* [svn-r9928] Purpose:Quincey Koziol2005-02-031-1/+1
| | | | | | | | | | | | | New feature Description: Add basic code for new B-tree implementation. They don't do much yet, aren't hooked up to anything yet and the format may change, but I'd like to start getting them into the daily tests. Platforms tested: FreeBSD 4.11 (sleipnir) w/parallel Too minor to require h5committest
* [svn-r9925] Purpose:Leon Arber2005-02-024-489/+201
| | | | | | | | | | | | | | | | | | | Bug Fix Description: Permanent fix for the incompatibilities between h5diff and h5repack. Solution: h5diff now contains the code to run both parallel and serial diffs. Depending on how the binary is called, it will run either the serial or the parallel versions respectively. Platforms tested: heping(serial + parallel), copper. Misc. update:
* [svn-r9920] Purpose:James Laird2005-02-021-2/+3
| | | | | | | | | | | | | | | | | | | Bug fix Description: Found the permanant fix to automake/CVS dependency problem Solution: Added AM_MAINTAINER_MODE macro to configure.in. Now automake will never try to regenerate Makefiles, Makefiles.in, configure, H5config.h, etc. when they are out of date, nor will it print any warnings. Developers should be very very careful to use reconfigure script, and can add --enable-maintainer-mode flag to configure on heping to regenerate these files correctly. Platforms tested: heping sleipnir copper
* [svn-r9915] Purpose:James Laird2005-02-021-6/+6
| | | | | | | | | | | | | | | Bug fix Description: Configuration files' timestamps were incorrect. Solution: Update Makefiles.in. Also added correct paths to autotools on heping, so heping build should be able to re-generate configuration files even if they are still broken. Platforms tested: sleipnir
* [svn-r9912] Purpose:James Laird2005-02-011-87/+8
| | | | | | | | | | | | | | | | | Bug fix Description: Dependencies between configure files (aclocal, configure.in, configure, Makefiles.am and .in) are still causing Makefiles to try to run autotools during build. Solution: Committed all Makefiles.in to update their timestamps. As a temporary measure, forcibly prevented automake from running autotools during build by redefining the variables it uses. Platforms tested: sleipnir (No changes to Makefile content)
* [svn-r9907] Purpose:James Laird2005-02-011-0/+1
| | | | | | | | | | | | | Bug fix Description: Different compilers use different flags to include Fortran module files Solution: Changed boilerplate to use configure variable rather than hardcoded -M flag. Platforms tested: sleipnir, sol, copper
* [svn-r9905] Purpose:Albert Cheng2005-02-012-3/+7
| | | | | | | | | | | | | | | | | | | fix bugs. Description: The three variables, g_nTasks, outBuff, and outBuffOffset, were declared in ph5diff.h. That means they are declared in various *.c files that include it, thus having the appearance of multiple defined. Most C compilers are forgiving of this error but the g++ rejects this practice. Solution: Make it only an extern declaration in ph5diff.h but really defined them in h5diff_util.c Platforms tested: sleipnir using g++ since this only failed in Daily test. Also testes in heping, serial and parallel modes.
* [svn-r9902] Purpose:James Laird2005-02-013-678/+759
| | | | | | | | | | | | | | | Configuration feature Description: HDF5 now uses automake to generate Makefiles Solution: Makefile.in files are now generated from Makefile.am files. To reconfigure (after chaning a Makefile.am or configure.in): /bin/sh bin/reconfigure.sh Platforms tested: Many
* [svn-r9893] Purpose:Albert Cheng2005-01-311-0/+3
| | | | | | | | | | | | | | Temporary daily tests fix. Description: The newly added ph5diff is not quite compatible with the h5repack tool. Disabled the ph5diff build (reverted back to building serial h5diff) to allow daily tests to work while ph5diff is fixed. Platforms tested: Tested in heping both serial and parallel modes. Misc. update:
* [svn-r9880] Purpose: bug fixPedro Vicente Nunes2005-01-281-1/+1
| | | | | | | | | | | | | | | Description: the print_paralell h5diff function had a call to vsnprintf. this causes a linking error on Windows Solution: replaced with HDvsnprintf Platforms tested: windows (vs6) linux Misc. update:
* [svn-r9877] Purpose:Leon Arber2005-01-274-9/+328
| | | | | | | | | | | | | | | | | Bug fix: Temporary fix for h5repack failures in all parallel builds. Description: The parallel additions to h5diff interfered with h5repack. Solution: Added a second set of "parallel" functions to h5diff.c. h5repack uses the serial versions, whereas h5diff will use the parallel versions. Also, h5diff will now be smart about when to enter parallel mode. If is run with mpirun with more than 1 task, it will enter parallel mode. Otherwise, it will stay in serial mode as before. Platforms tested: heping (serial and parallel) Misc. update:
* [svn-r9872] Purpose:Albert Cheng2005-01-267-2586/+2938
| | | | | | | | | | | | New feature. Description: Added new tool ph5diff. (Code done by Leon Arber.) Code is changed but test is not working yet. For now, it skipped all tests. Platforms tested: Tested in heping, serial and parallel modes.
* [svn-r9778] Purpose:Quincey Koziol2005-01-081-1/+45
| | | | | | | | | | | | | | | Remove feature Description: Retire threaded, balanced binary tree code from HDF5 use. Requiescat in pace... Also, regenerate dependencies files. Platforms tested: FreeBSD 4.10 (sleipnir) w/parallel Too minor to require full h5committesting (the code is already disconnected from everything except its tests)
* [svn-r9727] Purpose:Quincey Koziol2004-12-299-41/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug Fix/Code Cleanup/Doc Cleanup/Optimization/Branch Sync :-) Description: Generally speaking, this is the "signed->unsigned" change to selections. However, in the process of merging code back, things got stickier and stickier until I ended up doing a big "sync the two branches up" operation. So... I brought back all the "infrastructure" fixes from the development branch to the release branch (which I think were actually making some improvement in performance) as well as fixed several bugs which had been fixed in one branch, but not the other. I've also tagged the repository before making this checkin with the label "before_signed_unsigned_changes". Platforms tested: FreeBSD 4.10 (sleipnir) w/parallel & fphdf5 FreeBSD 4.10 (sleipnir) w/threadsafe FreeBSD 4.10 (sleipnir) w/backward compatibility Solaris 2.7 (arabica) w/"purify options" Solaris 2.8 (sol) w/FORTRAN & C++ AIX 5.x (copper) w/parallel & FORTRAN IRIX64 6.5 (modi4) w/FORTRAN Linux 2.4 (heping) w/FORTRAN & C++ Misc. update:
* [svn-r9533] Purpose:Pedro Vicente Nunes2004-11-162-35/+1952
| | | | | | | | | | | | | | | | | | | | | | | enhanced performance for h5diff Description: the comparison cycle for the 2 buffers read from file was using a compare function where the type must be checked for each datum (e.g due to recursive calls in compound types) for atomic types this checking can be avoided Solution: introduced cycles for each one of the atomic integer and float class types Platforms tested: linux aix solaris Misc. update:
* [svn-r9531] Purpose: Bug fix(#213)Raymond Lu2004-11-161-0/+3
| | | | | | | | | | | | | Description: H5Pset_fapl_family sets family member size only for creating new file. The file doesn't keep this size information. When the file is re-opened, the size of first member file is used as the member size. Solution: Assume user knows the original member size and sets it through H5Pset_fapl_family. That will be the member size. User can pass in value 0 as member size if he doesn't know the original member size. Library will choose the size of current first member size as the member file size. Platforms tested: h5committest and fuss.
* [svn-r9496] Purpose:Robert E. McGrath2004-11-022-1/+92
| | | | | | | | | | | | | | | | | | | | | | Fix SZIP filter to dynmically detect encoder. Description: Solution: See: http://hdf.ncsa.uiuc.edu/RFC/SZIP/Szip_dynamic_12_Oct.pdf Changes to h5repack tests, contingent on detecting SZIP encoder. Note new program: testh5repack_detect_szip Checks fo rencoder, prints out "yes" or "no". Used by hrepack.sh to detect encoder. Can also be used for windows tests. This is only used as part of the tests. Had to modify Makefile to build and clean this program.
* [svn-r9476] Purpose:MuQun Yang2004-10-271-2/+3
| | | | | | | | | | | | | | | | Make talign work on windows. Description: msvc++ uses _unlink instead of unlink. Solution: change the code to use HDunlink and include H5private.h(Not good?). Platforms tested: windows, Linux 2.4 Misc. update:
* [svn-r9395] Purpose:Quincey Koziol2004-10-101-5/+12
| | | | | | | | | | | Bug fix Description: Correct a couple of array bounds issues exposed by the PGI compiler Platforms tested: Linux 2.4 (verbena) w/PGI compilers Too minor too requie h5committest
* [svn-r9382] *** empty log message ***Quincey Koziol2004-10-081-10/+11
|
* [svn-r9370] Purpose:Quincey Koziol2004-10-0614-99/+78
| | | | | | | | | | | | | | | Refactor code Description: Refactor common code for determining the native type for using in the tools into separate routine. Also, reduce diffs between the two branches and bring back some fixes from the development branch to the release branch. Platforms tested: FreeBSD 4.10 (sleipnir) too minor to require h5committest
* [svn-r9364] Raymond Lu2004-10-054-11/+78
| | | | | | | | | | | | Purpose: change feature Description: Back up support bitfield and time datatypes in H5Tget_native_type.Leave it to future support. Let it return "not supported" error message for now. Platforms tested: h5committest and fuss. Misc. update: RELEASE.txt
* [svn-r8983] Purpose:Quincey Koziol2004-08-021-565/+565
| | | | | | | | | | | | Update dependencies Description: Update dependencies after config/depend1.in bugfix Platforms tested: FreeBSD 4.10 (sleipnir) w/parallel IRIX64 6.5 (modi4) h5committested
* [svn-r8912] Purpose:Pedro Vicente Nunes2004-07-213-17/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | bug fixes Description: the return error code for a function was not initialized. in HP-UX it happened that this variable was initialized to -1 causing the function to return with an error condtion solution : initialized the variable to 0 the name of the dataset was printed after the differences in verbose mode and report when differences were found solution : check first if differences were found and then print the name of dataset and differences in verbose mode always print the name first Solution: Platforms tested: linux aix solaris Misc. update:
* [svn-r8904] Purpose:Pedro Vicente Nunes2004-07-206-526/+588
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | h5diff and h5repack changes Description: h5diff introduced the following four modes of output: Normal mode: print the number of differences found and where they occured Report mode: print the above plus the differences Verbose mode: print the above plus a list of objects and warnings Quiet mode: do not print output (h5diff always returns an exit code of 1 when differences are found) h5repack added an extra parameter for SZIP filter (coding method) the new syntax is -f SZIP=<pixels per block,coding> (pixels per block is a even number in 2-32 and coding method is 'EC' or 'NN') Example of use: ./h5repack -i file1 -o file2 -f SZIP=8,NN -v updated usage messages, test scripts and files accordingly Solution: Platforms tested: linux AIX solaris Misc. update:
* [svn-r8869] Purpose:Pedro Vicente Nunes2004-07-131-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | h5repack changes Description: there were some requests to change some minor h5repack features h5repack only made a warning about a non available filter in verbose mode ( -v ) without -v it kept silent, and users sometimes missed this warning the request was that it should print this warning always. so, the new format, is e.g ./h5repack -i test_szip.h5 -o out.h5 Warning: dataset </dset_szip> cannot be read, SZIP filter is not available due to this, and to avoid a lot of these messages in the shell test script, I modified the script h5repack.sh so that it detects the presence of all filters in the environment (previously it only detected SZIP) the test files were also divided in more files , to make the script code easier to follow Solution: Platforms tested: linux AIX (no szip) solaris (no szip, no gzip ) Misc. update:
generated by cgit v0.12 at 2024-12-29 08:14:59 (GMT)