From 7782cc07965727064c93ea69f31a00586921bdb2 Mon Sep 17 00:00:00 2001
From: cvs2svn <no_author@cvs2svn>
Date: Thu, 10 Jul 2003 12:28:33 -0500
Subject: [svn-r7199] This commit was manufactured by cvs2svn to create branch
 'hdf5_1_6'.

---
 bin/buildhdf5 | 315 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 315 insertions(+)
 create mode 100755 bin/buildhdf5

diff --git a/bin/buildhdf5 b/bin/buildhdf5
new file mode 100755
index 0000000..4ceec6d
--- /dev/null
+++ b/bin/buildhdf5
@@ -0,0 +1,315 @@
+#!/bin/sh
+# Build HDF5 library by doing configure, make, and tests.
+# Usage: See USAGE()
+# Programmer: Albert Cheng
+# Creation date: Jul  9, 2003
+
+# Some handy definitions
+USAGE()
+{
+cat <<EOF
+Buildhdf5 builds the HDF5 library by running configure, make and make check.
+It skips the configure part if one has been done already.  In effect, one
+can continue from a previous build.
+
+Command Syntax
+==============
+buildhdf5 [-config] [-gass] [-srcdir dir] config-arguments ...
+   -config:	run configure only. [default to do build too]
+   -gass:	configure for the GASS driver
+   -help:	show this help page
+   -n:   	no execution, just show commands
+   -srcdir:	use dir as the source directory
+             	   [Note: this is different from --srcdir
+             	    which will be passed to configure]
+   all other arguments are passed to configure
+
+
+Configure in place or by srcdir
+===============================
+By default, the command looks for the configure command in
+'.' and then '../hdf5'.  When it finds it, it uses it to do
+the configure part.  In effect, if ./configure is found, it
+does the build in place.  If it finds ../hdf5/configure, it
+does the --srcdir (that is separated source) build.  Therefore,
+if you have the following structure setup, you can run multiple
+hosts building simultantously using a common source code.
+     hdf5_1.4/hdf5        # holds the source
+	  .../arabica     # for SunOS 2.7
+	  .../arabicapp   # for SunOS 2.7 parallel
+	  .../burrwhite   # for Linux 2.4
+
+Installing binary
+=================
+This command always install the binary in \$PWD/installdir.
+This allows multiple install testing in the same host if the srcdir
+configure is used.
+EOF
+}
+
+
+TIMESTAMP()
+{
+    echo "=====" "`date`" "====="
+}
+
+
+QUIT()
+{
+    TIMESTAMP
+}
+
+
+# Do one step bracketed with time stamps
+# The '< /dev/null' is needed to prevent some applications like MPI
+# jobs blocked for reading when they read stdin unnecessary.
+STEP()
+{
+    banner="$1"
+    command="$2"
+    resultfile="$3"
+
+    echo "$banner"
+    (TIMESTAMP; nerror=0 ;
+	echo "eval $command"
+	eval $command || nerror=1 ;
+	TIMESTAMP; exit $nerror) < /dev/null >> "$resultfile" 2>&1
+    if [ $? -ne 0 ]; then
+	echo "error in '$banner'.  buildhdf5 aborted."
+	exit 1
+    fi
+}
+
+
+# Try locate the HDF4 library
+# This is a hack because there is no consistent place to find
+# the valid HDF library.
+LOCATE_HDF4()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	HP-UX)
+	    h4paths="/afs/ncsa/packages/hdf/HPUX_10.20"
+	    ;;
+	IRIX)
+	    h4paths="/afs/ncsa/packages/hdf/4.1r3_irix"
+	    ;;
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		h4paths="/afs/ncsa/packages/hdf/IRIX64-n32_6.5"
+		;;
+	    *)
+		h4paths="/afs/ncsa/packages/hdf/IRIX64_6.5"
+		;;
+	    esac
+	    ;;
+	Linux)
+	    h4paths="/afs/ncsa/packages/hdf/linux"
+	    ;;
+	OSF1)
+	    h4paths="/afs/ncsa/packages/hdf/OSF1_V4.0"
+	    ;;
+	*)
+	    h4paths="/usr/ncsa /usr/sdt"
+	    ;;
+    esac
+    echo $h4paths
+    for h4 in $h4paths; do
+	if [ -f $h4/lib/libdf.a -a -f $h4/include/hdf.h ]; then
+	    WITH_H4="--with-hdf4=$h4/include,$h4/lib"
+	    break
+	fi
+    done
+    echo WITH_H4="$WITH_H4"
+}
+
+
+# Try locate the Fortran compiler
+# This is a hack because there is no consistent fortran compiler name
+LOCATE_FORTRAN()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
+		sslpaths=/usr/local/ssl-n32
+		;;
+	    *)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
+		sslpaths=/usr/local/ssl
+		;;
+	    esac
+	    ;;
+	*)
+	    ;;
+    esac
+    echo gasspaths=$gasspaths
+    echo $sslpaths=$sslpaths
+    for x in $gasspaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
+	   WITH_GASS="--with-gass=$x/include,$x/lib"
+	   break
+	fi
+    done
+    for x in $sslpaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libssl.a ]; then
+	   WITH_SSL="--with-ssl=$x/lib"
+	   break
+	fi
+    done
+
+    echo WITH_GASS="$WITH_GASS"
+    echo WITH_SSL="$WITH_SSL"
+
+}
+
+
+# Try locate the GASS software library
+# This is a hack because there is no consistent place to find
+# the valid HDF library.
+LOCATE_GASS()
+{
+    OS=`uname -s`
+    echo OS=$OS
+    case "$OS" in
+	IRIX64)
+	    case "$CC" in
+	    *-n32)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-n32_nothreads_standard_debug
+		sslpaths=/usr/local/ssl-n32
+		;;
+	    *)
+		gasspaths=/usr/local/globus-install-1.1.1/development/mips-sgi-irix6.5-64_nothreads_standard_debug
+		sslpaths=/usr/local/ssl
+		;;
+	    esac
+	    ;;
+	*)
+	    ;;
+    esac
+    echo gasspaths=$gasspaths
+    echo $sslpaths=$sslpaths
+    for x in $gasspaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libglobus_gass_cache.a ]; then
+	   WITH_GASS="--with-gass=$x/include,$x/lib"
+	   break
+	fi
+    done
+    for x in $sslpaths dummy; do
+	if [ $x != dummy -a -f $x/lib/libssl.a ]; then
+	   WITH_SSL="--with-ssl=$x/lib"
+	   break
+	fi
+    done
+
+    echo WITH_GASS="$WITH_GASS"
+    echo WITH_SSL="$WITH_SSL"
+
+}
+
+
+# Configure.  Default to do --srcdir.
+CONFIG()
+{
+    INSTALLDIR=`pwd`/installdir
+
+    test -d $INSTALLDIR ||  ( echo mkdir $INSTALLDIR; \
+	test "$NOEXEC" != 'noexec' && mkdir $INSTALLDIR )
+    CMD="$SRCDIR/configure --prefix=$INSTALLDIR $*"
+    echo $CMD
+    if [ "$NOEXEC" != 'noexec' ]; then
+	$CMD
+    else
+	true		# set exit code as 0
+    fi
+}
+
+# Main body
+TIMESTAMP
+trap QUIT 0
+
+#
+# setup
+#
+MAKE=${MAKE:-'gmake'}
+export MAKE
+CONFIGURE="CONFIG"
+CONFIG_ONLY=no		# default is configure and build
+NOEXEC=			# default to execute commands
+SRCDIRLIST=". ../hdf5"  # places to look for configure
+nerror=0
+
+# parse some options
+while [ $# -gt 0 ]; do
+    case "$1" in
+	-config)
+	    # do configure only
+	    CONFIG_ONLY=yes
+	    ;;
+	-gass)
+	    LOCATE_GASS
+	    ;;
+	-help)
+	    USAGE
+	    exit 0
+	    ;;
+	-n)
+	    NOEXEC='noexec'
+	    ;;
+	-srcdir)
+	    shift
+	    SRCDIRLIST="$1"
+	    ;;
+	*)	# Quit parsing
+	    break
+	    ;;
+    esac
+    shift
+done
+	    
+# Figure out if srcdir is wished.
+# Make sure we are at the library root level
+# by checking couple typical files.  Not bullet-proof.
+for SRCDIR in $SRCDIRLIST dummy; do
+    if [ x-$SRCDIR = x-dummy ]; then
+	break
+    fi
+    if [ -d $SRCDIR/src -a -d $SRCDIR/config -a -f $SRCDIR/configure ]
+    then
+	break
+    fi
+done
+
+if [ x-$SRCDIR = x-dummy ]; then
+    echo "Could not find the source dir or configure script.  Abort."
+    exit 1
+fi
+
+# Configure
+# no configure if already done.
+if [ ! -f config.status ]; then
+    CONFIGURE="$CONFIGURE $WITH_SSL $WITH_GASS"
+    STEP "Configure HDF5..." "$CONFIGURE $*" "#config"
+else
+    STEP "Confiugre Skipped" "echo Confiugre Skipped" "#config"
+fi
+
+if [ x-$CONFIG_ONLY = x-yes ]; then
+    exit 0
+fi
+
+
+# Compile
+STEP "Make HDF5..." "$MAKE" "#make"
+
+# Tests
+STEP "Testing HDF5..." "$MAKE check" "#test"
+
+# all done
+echo "No Errors encountered"
+TIMESTAMP
-- 
cgit v0.12