From 0603e2db00e773702906387620e5644c23360703 Mon Sep 17 00:00:00 2001 From: Bill Wendling Date: Mon, 28 Jul 2003 16:38:04 -0500 Subject: [svn-r7269] Purpose: Update Description: Revamped the configuration system. The configurations for the Fortran and C++ libraries are no longer separate from the "main" configuration system. This involved removing the "configure*" and "aclocal.m4" files from the fortran/ and c++/ subdirectories. Also merging settings in the config/ subdirectories into the main config/ subdirectory. Fortran header files had to be modified a little for Linux. It was checking if it was a Linux machine by some #defines, however with the -std=c99 switch, these defines weren't there. I added a check for some other ones which should be there whether the -std=c99 switch is used or not. Platforms tested: Verbena (Fortran & C++) Sol (Fortran & C++) Copper (Fortran & C++) Modi4 (Parallel, Fortran, & C++) Misc. update: --- MANIFEST | 68 +- Makefile.in | 18 +- acsite.m4 | 504 ++ c++/aclocal.m4 | 3528 ------------ c++/config/BlankForm | 126 - c++/config/commence.in | 163 - c++/config/conclude.in | 175 - c++/config/depend1.in | 51 - c++/config/depend2.in | 11 - c++/config/depend3.in | 7 - c++/config/depend4.in | 7 - c++/config/dependN.in | 4 - c++/config/hpux11.00 | 24 - c++/config/irix6.x | 34 - c++/config/linux-gnu | 4 - c++/config/linux-gnulibc1 | 16 - c++/config/linux-gnulibc2 | 10 - c++/config/powerpc-ibm-aix | 10 - c++/config/rs6000-ibm-aix4.x | 11 - c++/config/solaris2.x | 44 - c++/config/sv1-cray | 126 - c++/config/unicos10.0.X | 126 - c++/config/unicosmk2.0.6.X | 126 - c++/configure | 10529 ---------------------------------- c++/configure.in | 812 --- c++/examples/Makefile.in | 4 +- c++/src/Dependencies | 1199 ++++ c++/src/Makefile.in | 4 +- c++/src/h5c++.in | 5 +- c++/test/Dependencies | 344 ++ c++/test/Makefile.in | 10 +- config/commence.in | 23 +- config/conclude.in | 102 +- config/dec-flags | 35 + config/depend1.in | 52 +- config/freebsd | 12 +- config/gnu-flags | 336 +- config/hpux10.20 | 72 +- config/hpux11.00 | 93 +- config/hpux9.03 | 42 +- config/i386-pc-cygwin32 | 6 +- config/ia64-linux-gnu | 106 +- config/intel-osf1 | 6 +- config/irix5.x | 60 +- config/irix6.x | 195 +- config/linux-gnulibc1 | 40 + config/powerpc-ibm-aix4.x | 37 + config/powerpc-ibm-aix5.x | 97 +- config/rs6000-ibm-aix4.x | 32 + config/solaris2.x | 99 +- config/sv1-cray | 125 +- config/unicos | 95 +- config/unicos10.0.X | 121 +- config/unicosmk | 94 +- config/unicosmk2.0.5.X | 96 +- config/unicosmk2.0.6.X | 125 +- config/unicosmk2.0.X | 94 +- configure | 2545 +++++++-- configure.in | 669 ++- fortran/Makefile.dist | 24 - fortran/aclocal.m4 | 3528 ------------ fortran/acsite.m4 | 504 -- fortran/config/BlankForm | 126 - fortran/config/commence.in | 170 - fortran/config/conclude.in | 189 - fortran/config/dec-flags | 94 - fortran/config/dec-osf4.x | 20 - fortran/config/dec-osf5.x | 20 - fortran/config/depend | 0 fortran/config/depend1.in | 51 - fortran/config/depend2.in | 11 - fortran/config/depend3.in | 7 - fortran/config/depend4.in | 7 - fortran/config/dependN.in | 4 - fortran/config/freebsd | 21 - fortran/config/gnu-flags | 227 - fortran/config/hpux10.20 | 68 - fortran/config/hpux11.00 | 68 - fortran/config/hpux9.03 | 36 - fortran/config/i386-pc-cygwin32 | 20 - fortran/config/ia64-linux-gnu | 94 - fortran/config/intel-osf1 | 83 - fortran/config/irix5.x | 50 - fortran/config/irix6.x | 127 - fortran/config/linux-gnu | 4 - fortran/config/linux-gnuaout | 4 - fortran/config/linux-gnulibc1 | 51 - fortran/config/linux-gnulibc2 | 10 - fortran/config/powerpc-ibm-aix4.x | 44 - fortran/config/powerpc-ibm-aix5.x | 96 - fortran/config/rs6000-ibm-aix4.x | 44 - fortran/config/solaris2.x | 64 - fortran/config/sv1-cray | 170 - fortran/config/unicos | 168 - fortran/config/unicos10.0.X | 168 - fortran/config/unicosmk | 170 - fortran/config/unicosmk2.0.5.X | 172 - fortran/config/unicosmk2.0.6.X | 172 - fortran/config/unicosmk2.0.X | 172 - fortran/configure | 11108 ------------------------------------ fortran/configure.in | 1156 ---- fortran/examples/Makefile.in | 4 +- fortran/src/Dependencies | 3 +- fortran/src/H5FDmpiof.c | 2 +- fortran/src/H5config_fortran.h.in | 106 - fortran/src/H5f90i.h | 8 +- fortran/src/Makefile.in | 8 +- fortran/test/Makefile.in | 12 +- fortran/testpar/Makefile.in | 11 +- src/H5config.h.in | 6 + 110 files changed, 6061 insertions(+), 36930 deletions(-) create mode 100644 acsite.m4 delete mode 100644 c++/aclocal.m4 delete mode 100644 c++/config/BlankForm delete mode 100644 c++/config/commence.in delete mode 100644 c++/config/conclude.in delete mode 100644 c++/config/depend1.in delete mode 100644 c++/config/depend2.in delete mode 100644 c++/config/depend3.in delete mode 100644 c++/config/depend4.in delete mode 100644 c++/config/dependN.in delete mode 100644 c++/config/hpux11.00 delete mode 100644 c++/config/irix6.x delete mode 100644 c++/config/linux-gnu delete mode 100644 c++/config/linux-gnulibc1 delete mode 100644 c++/config/linux-gnulibc2 delete mode 100644 c++/config/powerpc-ibm-aix delete mode 100644 c++/config/rs6000-ibm-aix4.x delete mode 100644 c++/config/solaris2.x delete mode 100644 c++/config/sv1-cray delete mode 100644 c++/config/unicos10.0.X delete mode 100644 c++/config/unicosmk2.0.6.X delete mode 100755 c++/configure delete mode 100644 c++/configure.in delete mode 100644 fortran/Makefile.dist delete mode 100644 fortran/aclocal.m4 delete mode 100644 fortran/acsite.m4 delete mode 100644 fortran/config/BlankForm delete mode 100644 fortran/config/commence.in delete mode 100644 fortran/config/conclude.in delete mode 100644 fortran/config/dec-flags delete mode 100644 fortran/config/dec-osf4.x delete mode 100644 fortran/config/dec-osf5.x delete mode 100644 fortran/config/depend delete mode 100644 fortran/config/depend1.in delete mode 100644 fortran/config/depend2.in delete mode 100644 fortran/config/depend3.in delete mode 100644 fortran/config/depend4.in delete mode 100644 fortran/config/dependN.in delete mode 100644 fortran/config/freebsd delete mode 100644 fortran/config/gnu-flags delete mode 100644 fortran/config/hpux10.20 delete mode 100644 fortran/config/hpux11.00 delete mode 100644 fortran/config/hpux9.03 delete mode 100644 fortran/config/i386-pc-cygwin32 delete mode 100644 fortran/config/ia64-linux-gnu delete mode 100644 fortran/config/intel-osf1 delete mode 100644 fortran/config/irix5.x delete mode 100644 fortran/config/irix6.x delete mode 100644 fortran/config/linux-gnu delete mode 100644 fortran/config/linux-gnuaout delete mode 100644 fortran/config/linux-gnulibc1 delete mode 100644 fortran/config/linux-gnulibc2 delete mode 100644 fortran/config/powerpc-ibm-aix4.x delete mode 100644 fortran/config/powerpc-ibm-aix5.x delete mode 100644 fortran/config/rs6000-ibm-aix4.x delete mode 100644 fortran/config/solaris2.x delete mode 100644 fortran/config/sv1-cray delete mode 100644 fortran/config/unicos delete mode 100644 fortran/config/unicos10.0.X delete mode 100644 fortran/config/unicosmk delete mode 100644 fortran/config/unicosmk2.0.5.X delete mode 100644 fortran/config/unicosmk2.0.6.X delete mode 100644 fortran/config/unicosmk2.0.X delete mode 100755 fortran/configure delete mode 100644 fortran/configure.in delete mode 100644 fortran/src/H5config_fortran.h.in diff --git a/MANIFEST b/MANIFEST index 73540da..abf77e0 100644 --- a/MANIFEST +++ b/MANIFEST @@ -13,6 +13,7 @@ ./Makefile.in ./README.txt ./aclocal.m4 +./acsite.m4 ./configure ./configure.in @@ -525,50 +526,7 @@ # #------------------------------------------------------------------------------ -./fortran/Makefile.dist ./fortran/Makefile.in -./fortran/aclocal.m4 -./fortran/acsite.m4 -./fortran/configure -./fortran/configure.in - -./fortran/config/BlankForm -./fortran/config/commence.in -./fortran/config/conclude.in -./fortran/config/dec-flags -./fortran/config/dec-osf4.x -./fortran/config/dec-osf5.x -./fortran/config/depend -./fortran/config/depend1.in -./fortran/config/depend2.in -./fortran/config/depend3.in -./fortran/config/depend4.in -./fortran/config/dependN.in -./fortran/config/freebsd -./fortran/config/gnu-flags -./fortran/config/hpux10.20 -./fortran/config/hpux11.00 -./fortran/config/hpux9.03 -./fortran/config/i386-pc-cygwin32 -./fortran/config/ia64-linux-gnu -./fortran/config/intel-osf1 -./fortran/config/irix5.x -./fortran/config/irix6.x -./fortran/config/linux-gnu -./fortran/config/linux-gnuaout -./fortran/config/linux-gnulibc1 -./fortran/config/linux-gnulibc2 -./fortran/config/powerpc-ibm-aix4.x -./fortran/config/powerpc-ibm-aix5.x -./fortran/config/rs6000-ibm-aix4.x -./fortran/config/solaris2.x -./fortran/config/sv1-cray -./fortran/config/unicos -./fortran/config/unicos10.0.X -./fortran/config/unicosmk -./fortran/config/unicosmk2.0.X -./fortran/config/unicosmk2.0.5.X -./fortran/config/unicosmk2.0.6.X ./fortran/examples/Dependencies ./fortran/examples/Makefile.in @@ -593,7 +551,6 @@ ./fortran/src/H5_ff.f90 ./fortran/src/H5Af.c ./fortran/src/H5Aff.f90 -./fortran/src/H5config_fortran.h.in ./fortran/src/H5Df.c ./fortran/src/H5Dff.f90 ./fortran/src/H5Ef.c @@ -673,29 +630,6 @@ #------------------------------------------------------------------------------ ./c++/Makefile.in -./c++/aclocal.m4 -./c++/configure -./c++/configure.in - -./c++/config/BlankForm -./c++/config/commence.in -./c++/config/conclude.in -./c++/config/depend1.in -./c++/config/depend2.in -./c++/config/depend3.in -./c++/config/depend4.in -./c++/config/dependN.in -./c++/config/hpux11.00 -./c++/config/linux-gnu -./c++/config/linux-gnulibc1 -./c++/config/linux-gnulibc2 -./c++/config/powerpc-ibm-aix -./c++/config/rs6000-ibm-aix4.x -./c++/config/solaris2.x -./c++/config/irix6.x -./c++/config/sv1-cray -./c++/config/unicos10.0.X -./c++/config/unicosmk2.0.6.X ./c++/examples/Dependencies ./c++/examples/Attributes.h5 diff --git a/Makefile.in b/Makefile.in index 0b78e07..a8f2867 100644 --- a/Makefile.in +++ b/Makefile.in @@ -25,7 +25,7 @@ srcdir=@srcdir@ # Subdirectories in build-order (not including `examples') # TESTPARALLEL must be after test since it uses libtest.a. Putting it # before tools allows parallel tests to run sooner. -SUBDIRS=src test @TESTPARALLEL@ tools @PABLO@ @subdirs@ +SUBDIRS=src test @TESTPARALLEL@ tools @PABLO@ @HDF5_INTERFACES@ ############################################################################## ## T A R G E T S @@ -72,12 +72,12 @@ lib progs check test _test uninstall: done tests TAGS dep depend: - @@SETX@; for d in $(SUBDIRS) perform; do \ + @@SETX@; for d in $(SUBDIRS) perform; do \ (cd $$d && $(MAKE) $@) || exit 1; \ done install-all: - @@SETX@; for d in dummy @subdirs@; do \ + @@SETX@; for d in dummy @HDF5_INTERFACES@; do \ if test $$d != "dummy"; then \ (cd $$d && $(MAKE) $@) || exit 1; \ fi; \ @@ -98,7 +98,7 @@ install: @$(LT) --mode=finish $(libdir) install-examples: - @@SETX@; for d in dummy @subdirs@; do \ + @@SETX@; for d in dummy @HDF5_INTERFACES@; do \ if test $$d != "dummy"; then \ (cd $$d && $(MAKE) $@) || exit 1; \ fi; \ @@ -106,7 +106,7 @@ install-examples: (cd examples && $(MAKE) $@) || exit 1; uninstall-examples: - @@SETX@; for d in dummy @subdirs@; do \ + @@SETX@; for d in dummy @HDF5_INTERFACES@; do \ if test $$d != "dummy"; then \ (cd $$d && $(MAKE) $@) || exit 1; \ fi; \ @@ -125,7 +125,7 @@ uninstall-doc: ## This requires a proper "make install" has been done. check-install: (cd examples && $(MAKE) check) || exit 1 - @@SETX@; for d in dummy @subdirs@; do \ + @@SETX@; for d in dummy @HDF5_INTERFACES@; do \ if test $$d != "dummy"; then \ (cd $$d && $(MAKE) $@) || exit 1; \ fi; \ @@ -142,13 +142,13 @@ H5Tinit.c: mostlyclean distclean maintainer-clean clean mostlyclean: - @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ + @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ (cd $$d && $(MAKE) $@); \ done -$(RM) conftest conftest.c distclean: - @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ + @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ (cd $$d && $(MAKE) $@); \ done -$(RM) config/commence config/conclude @@ -160,7 +160,7 @@ distclean: maintainer-clean: @echo "This target is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." - @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ + @@SETX@; for d in $(SUBDIRS) doc perform examples; do \ (cd $$d && $(MAKE) $@); \ done -$(RM) config.cache config.log config.status src/H5config.h diff --git a/acsite.m4 b/acsite.m4 new file mode 100644 index 0000000..46f69f9 --- /dev/null +++ b/acsite.m4 @@ -0,0 +1,504 @@ +dnl ------------------------------------------------------------------------- +dnl ------------------------------------------------------------------------- +dnl +dnl Copyright by the Board of Trustees of the University of Illinois. +dnl All rights reserved. +dnl +dnl This file is part of HDF5. The full HDF5 copyright notice, including +dnl terms governing use, modification, and redistribution, is contained in +dnl the files COPYING and Copyright.html. COPYING can be found at the root +dnl of the source code distribution tree; Copyright.html can be found at the +dnl root level of an installed copy of the electronic HDF5 document set and +dnl is linked from the top-level documents page. It can also be found at +dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +dnl +dnl Macros for HDF5 Fortran +dnl +dnl ------------------------------------------------------------------------- +dnl ------------------------------------------------------------------------- + +dnl ------------------------------------------------------------------------- +dnl AC_PROG_F9X +dnl +dnl Check for a Fortran 9X compiler. +dnl +AC_DEFUN(AC_PROG_F9X, +[AC_CHECK_PROGS(F9X, f90 pgf90 xlf90 f95 g95 xlf95) +test -z "$F9X" && AC_MSG_ERROR([no acceptable f9X compiler found in \$PATH]) + +AC_PROG_F9X_WORKS +AC_PROG_F9X_GNU + +if test $ac_cv_prog_g9x = yes; then + G9X=yes + dnl Check whether -g works, even if FFLAGS is set, in case the package + dnl plays around with FFLAGS (such as to build both debugging and + dnl normal versions of a library), tasteless as that idea is. + ac_test_FFLAGS="${FFLAGS+set}" + ac_save_FFLAGS="$FFLAGS" + FFLAGS= + AC_PROG_F9X_G + if test "$ac_test_FFLAGS" = set; then + FFLAGS="$ac_save_FFLAGS" + elif test $ac_cv_prog_f9x_g = yes; then + FFLAGS="-g -O2" + else + FFLAGS="-O2" + fi +else + G9X= + test "${FFLAGS+set}" = set || FFLAGS="-g" +fi +]) + +dnl ------------------------------------------------------------------------- +dnl AC_TRY_F9X_COMPILER() +dnl +dnl It would be nice if the compiler actually works. +dnl +AC_DEFUN(AC_TRY_F9X_COMPILER, [ +cat > conftest.$ac_ext << EOF +[$1] +EOF +if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + [$2]=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + [$3]=no + else + [$3]=yes + fi +else + echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD + [$2]=no +fi +rm -fr conftest* +]) + +dnl ------------------------------------------------------------------------- +dnl AC_LANG_FORTRAN9X() +dnl +dnl Generic macro to setup the Fortran 9X specific env variables. +dnl +m4_define([AC_LANG(FORTRAN9X)], +[ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&AS_MESSAGE_LOG_FD' +cross_compiling=$ac_cv_prog_f9x_cross +]) + +AU_DEFUN([AC_LANG_FORTRAN9X], [AC_LANG(FORTRAN9X)]) + +dnl ------------------------------------------------------------------------- +dnl AC_LANG_F9X_WORKS() +dnl +dnl It would be nice if the compiler actually works. +dnl +AC_DEFUN(AC_PROG_F9X_WORKS, [ +AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works]) +AC_LANG_SAVE +AC_LANG_FORTRAN9X +AC_TRY_F9X_COMPILER([ + program conftest + end +], ac_cv_prog_f9x_works, ac_cv_prog_f9x_cross) +AC_LANG_RESTORE +AC_MSG_RESULT($ac_cv_prog_f9x_works) +if test $ac_cv_prog_f9x_works = no; then + AC_MSG_ERROR([installation or configuration problem: Fortran 9X compiler cannot create executables.]) +fi +AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler]) +AC_MSG_RESULT($ac_cv_prog_f9x_cross) +cross_compiling=$ac_cv_prog_f9x_cross +]) + +dnl ------------------------------------------------------------------------- +dnl AC_PROG_F9X_GNU +dnl +dnl Test whether for Fortran 9X compiler is `g95' (the GNU Fortran 95 +dnl Compiler). This test depends on whether the Fortran 9X compiler +dnl can do CPP pre-processing. +dnl +AC_DEFUN(AC_PROG_F9X_GNU, +[AC_CACHE_CHECK(whether we are using GNU Fortran 95, ac_cv_prog_g9x, +[cat > conftest.fpp </dev/null 2>&1; then + ac_cv_prog_g9x=yes +else + ac_cv_prog_g9x=no +fi])]) + +dnl ------------------------------------------------------------------------- +dnl AC_PROG_F9X_G +dnl +dnl Test whether the Fortran 9X compiler can accept the `-g' option +dnl to enable debugging. +dnl +AC_DEFUN(AC_PROG_F9X_G, +[AC_CACHE_CHECK(whether $F9X accepts -g, ac_cv_prog_f9x_g, +[cat > conftest.f << EOF + program conftest + end +EOF +if test -z "`$F9X -g -c conftest.f 2>&1`"; then + ac_cv_prog_f9x_g=yes +else + ac_cv_prog_f9x_g=no +fi +rm -f conftest* +])]) + +dnl ------------------------------------------------------------------------- +dnl AC_F9X_OPT_FLAGS() +dnl +dnl Check for optimizer flags the Fortran compiler can use. +dnl +AC_DEFUN(AC_F9X_OPT_FLAGS, +[AC_MSG_CHECKING([for $F9X optimizer flags]) +AC_LANG_SAVE +AC_LANG_FORTRAN9X + +for flags in "-fast" "-O3" "-O" "";do + cat > conftest.$ac_ext < /dev/null 2>&1; then :; else + FFLAGS="$FFLAGS $flags" + break + fi + fi +done + +if test -n "$flags"; then + echo "$flags" 1>&6 +else + echo "none" 1>&6 +fi +rm -f conftest* +]) + +dnl ------------------------------------------------------------------------- +dnl AC_F9X_MODS() +dnl +dnl Check how F9X handles modules. This macro also checks which +dnl command-line option to use to include the module once it's built. +dnl +AC_DEFUN(AC_F9X_MODS, +[AC_MSG_CHECKING(what $F9X does with modules) +AC_LANG_SAVE +AC_LANG_FORTRAN9X + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&1 +if test "$modfiles" = file.o; then + echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6 + OLD_FFLAGS=$FFLAGS + FFLAGS="$FFLAGS -em" + eval $ac_compile + modfiles="" + for f in file.o module.mod MODULE.mod module.M MODULE.M; do + test -f $f && modfiles="$f" + done + if test "$modfiles" = "file.o"; then + FFLAGS=$OLD_FFLAGS + echo no 6>&1 + else + echo yes 6>&1 + fi +fi +cd .. + +AC_MSG_CHECKING(how $F9X finds modules) + +for flag in "-I" "-M" "-p"; do + cat >conftest.$ac_ext <&6 + FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS" +else + echo unknown 1>&6 +fi +AC_SUBST(F9XMODFLAG) +AC_SUBST(F9XMODEXT) +rm -rf conftest* +]) + +dnl ------------------------------------------------------------------------- +dnl AC_TRY_FCOMPILE() +dnl +dnl Check if we can compile a simple Fortran 90 program. +dnl +dnl AC_TRY_FCOMPILE(FUNCTION-BODY, +dnl [ACTION-IF-SUCCESS], [ACTION-IF-NOT-SUCCESS]) +dnl +AC_DEFUN([AC_TRY_FCOMPILE], +[AC_LANG_SAVE +AC_LANG_FORTRAN9X + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <conftest.$ac_ext <conftest.$ac_ext <&6 +dnl cat >conftest.f90 <<'EOF' +dnl program conftest +dnl if (selected_real_kind(12) .eq. kind(0.0)) then +dnl print '(a)','YES' +dnl else +dnl print '(a)','NO' +dnl end if +dnl end program conftest +dnl EOF +dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 +dnl if test "`./conftest | head -1`" = YES; then +dnl echo "yes" 1>&6 +dnl AC_DEFINE(HIPREC) +dnl else +dnl echo "no" 1>&6 +dnl fi + +dnl echo $ac_n "checking whether f90 precision of default real type""... $ac_c" 1>&6 +dnl cat >conftest.f90 <<'EOF' +dnl program conftest +dnl if (kind(0.0) .eq. selected_real_kind(12) .or.& +dnl &kind(0.0) .eq. selected_real_kind(6) ) then +dnl print '(a)','YES' +dnl else +dnl print '(a)','NO' +dnl end if +dnl end program conftest +dnl EOF +dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 +dnl if test "`./conftest | head -1`" = YES; then +dnl echo "OK" 1>&6 +dnl AC_DEFINE(REALOK) +dnl else +dnl echo "no" 1>&6 +dnl fi + +dnl echo $ac_n "checking accuracy of arithmetic""... $ac_c" 1>&6 +dnl cat >conftest.f90 <<'EOF' +dnl program conftest +dnl integer, parameter :: double=selected_real_kind(12) +dnl real(double), parameter :: ulp=2.0_double**(-47) +dnl real(double), parameter :: ans=0.92699498904359955986_double +dnl real(double) :: x,y,z +dnl integer i +dnl x=0.0_double +dnl y=ulp +dnl do i=2,100 +dnl z=x+y +dnl x=y +dnl y=z-int(z) +dnl end do +dnl if (y-ans .lt. ulp/2.0_double) then +dnl print '(a)','YES' +dnl else +dnl print '(a)','NO' +dnl end if +dnl end program conftest +dnl EOF +dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 +dnl if test "`./conftest | head -1`" = YES; then +dnl echo "OK" 1>&6 +dnl AC_DEFINE(ARITHOK) +dnl else +dnl echo "no" 1>&6 +dnl fi + +dnl echo $ac_n "checking whether int is the fastest way to truncate""... $ac_c" 1>&6 +dnl cat >conftest.f90 <<'EOF' +dnl program conftest +dnl integer, parameter :: double=selected_real_kind(12) +dnl real(double), parameter :: ulp=2.0_double**(-47) +dnl real(double) :: x,y,z,ya,yb +dnl integer :: t0,t1,i,timea,timeb +dnl +dnl x=0.0_double +dnl y=ulp +dnl call system_clock(t0) +dnl do i=2,1000000 +dnl z=x+y +dnl x=y +dnl y=z-int(z) +dnl end do +dnl ya=y +dnl call system_clock(t1) +dnl timea=t1-t0 +dnl +dnl x=0.0_double +dnl y=ulp +dnl call system_clock(t0) +dnl do i=2,1000000 +dnl z=x+y +dnl x=y +dnl if (z.ge.1.0_double) then +dnl y=z-1.0_double +dnl else +dnl y=z +dnl end if +dnl end do +dnl yb=y +dnl call system_clock(t1) +dnl timeb=t1-t0 +dnl +dnl if (timea.lt.timeb) then +dnl print '(a)','YES' +dnl else +dnl print '(a)','NO' +dnl end if +dnl print *,ya,yb +dnl end program conftest +dnl EOF +dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 +dnl if test "`./conftest | head -1`" = YES; then +dnl echo "yes" 1>&6 +dnl AC_DEFINE(USEINT) +dnl else +dnl echo "no" 1>&6 +dnl fi +dnl +dnl ------------------------------------------------------------------------- +dnl ------------------------------------------------------------------------- diff --git a/c++/aclocal.m4 b/c++/aclocal.m4 deleted file mode 100644 index 0966dc7..0000000 --- a/c++/aclocal.m4 +++ /dev/null @@ -1,3528 +0,0 @@ -# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*- - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- - -# serial 46 AC_PROG_LIBTOOL - -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -]) - -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -_LT_AC_PROG_ECHO_BACKSLASH -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_RESTORE]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -_LT_AC_LTCONFIG_HACK - -]) - -# AC_LIBTOOL_HEADER_ASSERT -# ------------------------ -AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], -[AC_CACHE_CHECK([whether $CC supports assert without backlinking], - [lt_cv_func_assert_works], - [case $host in - *-*-solaris*) - if test "$GCC" = yes && test "$with_gnu_ld" != yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) lt_cv_func_assert_works=no ;; - *) lt_cv_func_assert_works=yes ;; - esac - fi - ;; - esac]) - -if test "x$lt_cv_func_assert_works" = xyes; then - AC_CHECK_HEADERS(assert.h) -fi -])# AC_LIBTOOL_HEADER_ASSERT - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h) -])# _LT_AC_CHECK_DLFCN - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $nlist" >&AC_FD_CC - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi - else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - -# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR -# --------------------------------- -AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], -[# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi -])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[if test "$cross_compiling" = yes; then : - [$4] -else - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - -AC_DEFUN([_LT_AC_LTCONFIG_HACK], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" - -AC_MSG_CHECKING([for objdir]) -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -AC_MSG_RESULT($objdir) - - -AC_ARG_WITH(pic, -[ --with-pic try to use only PIC/non-PIC objects [default=use both]], -pic_mode="$withval", pic_mode=default) -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -AC_MSG_CHECKING([for $compiler option to produce PIC]) -AC_CACHE_VAL(lt_cv_prog_cc_pic, -[ lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - #################################################################### - ## HACK Alert! This is causing problems with C++ on SP3...We'll just - ## remove this...THERE! All better now. - #################################################################### - ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - : - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - if test "x$host_vendor" = xsni; then - lt_cv_prog_cc_wl='-LD' - else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi -]) -if test -z "$lt_cv_prog_cc_pic"; then - AC_MSG_RESULT([none]) -else - AC_MSG_RESULT([$lt_cv_prog_cc_pic]) - - # Check to make sure the pic_flag actually works. - AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) - AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - AC_TRY_COMPILE([], [], [dnl - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - ], [dnl - lt_cv_prog_cc_pic_works=no - ]) - CFLAGS="$save_CFLAGS" - ]) - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) - lt_cv_prog_cc_can_build_shared=no - fi -fi - -AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) -AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) - LDFLAGS="$save_LDFLAGS" -]) - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) -AC_CACHE_VAL([lt_cv_compiler_c_o], [ -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&AC_FD_CC - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null -]) -compiler_c_o=$lt_cv_compiler_c_o -AC_MSG_RESULT([$compiler_c_o]) - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) - AC_CACHE_VAL([lt_cv_compiler_o_lo], [ - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - ]) - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - ]) - compiler_o_lo=$lt_cv_compiler_o_lo - AC_MSG_RESULT([$compiler_o_lo]) -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - ]) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$compiler_rtti_exceptions]) - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - ####################################################################### - # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue. - # The ``-b nolibpath -b ...'' flags were messing with the mpicc - # compiler's already defined library paths and it wasn't able to find - # the libraries it needed to run....DOH! - hname="`hostname`" - - case "$hname" in - *pacific.llnl.gov* | *s0*) - hardcode_libdir_flag_spec=' ' - ;; - *) - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - ;; - esac - # - # End MAJOR HACK - # - ####################################################################### - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -AC_MSG_RESULT([$ld_shlibs]) -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -AC_MSG_CHECKING([how to hardcode library paths into programs]) -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -AC_MSG_RESULT([$hardcode_action]) - -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -AC_LIBTOOL_DLOPEN_SELF - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], - [$rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile); then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi]) - AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - -])# _LT_AC_LTCONFIG_HACK - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_LIBTOOL_PICMODE - implement the --with-pic flag -# Usage: AC_LIBTOOL_PICMODE[(MODE)] -# Where MODE is either `yes' or `no'. If omitted, it defaults to -# `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default)]) - - -# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -]) - - -# AC_PATH_MAGIC - find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl -AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) - else - MAGIC_CMD=: - fi -fi -]) - - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | [[A-Za-z]]:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -# AC_PROG_LD_GNU - -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -]) - -# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, -[lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" -]) - -# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[[78]]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -]) - - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - diff --git a/c++/config/BlankForm b/c++/config/BlankForm deleted file mode 100644 index 18933e4..0000000 --- a/c++/config/BlankForm +++ /dev/null @@ -1,126 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C++ Compiler -# ----------------------- -# -# The user should be able to specify the compiler by setting the CXX -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CXX is unset then this script may -# set it. If CXX is unset by time this script completes then configure -# will try `g++' and `CC' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CXX_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test -z "$CXX"; then - CXX="/some/default/compiler/named/foo -ansi" - CXX_BASENAME=foo -fi - - -# C++ Compiler and Preprocessor Flags -# ----------------------------------- -# -# Flags that end with `_CXXFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CXXFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CXXFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CXXFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CXXFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CXX_BASENAME which is the base name of the -# first word in $CXX (note that the value of CXX may have changed -# above). - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/commence.in b/c++/config/commence.in deleted file mode 100644 index 381f014..0000000 --- a/c++/config/commence.in +++ /dev/null @@ -1,163 +0,0 @@ -##------------------------------------------------------------ -*- makefile -*- -## The following section of this makefile comes from the -## `./config/commence' file which was generated with config.status -## from `./config/commence.in'. -##----------------------------------------------------------------------------- - -## Things that Make needs -.SUFFIXES: -.SUFFIXES: .cpp .o .lo -@SET_MAKE@ - -## Directories to search -@SEARCH@ - -## Programs -SHELL=/bin/sh -CXX=@CXX@ -CXXFLAGS=@CXXFLAGS@ -CFLAGS=@CFLAGS@ -CPPFLAGS=@CPPFLAGS@ -LDFLAGS=@LDFLAGS@ -ROOT=@ROOT@ -LIBS=@LIBS@ -AR=@AR@ -RANLIB=@RANLIB@ -PERL=@PERL@ -RM=rm -f -CP=cp -INSTALL=@INSTALL@ -INSTALL_PROGRAM=@INSTALL_PROGRAM@ -INSTALL_DATA=@INSTALL_DATA@ -TRACE=: - -## Installation points -prefix=@prefix@ -exec_prefix=@exec_prefix@ -bindir=@bindir@ -libdir=@libdir@ -includedir=@includedir@ -docdir=@exec_prefix@/doc -PUB_LIB=$(LIB) - -## Obtain default library; the current version of libtool does not fully -## support C++ yet, and it does not know which default library to find. -## With libtool 1.5, this support can be removed. - BMR - Jan, 2002 -DEFAULT_LIBS=@DEFAULT_LIBS@ - -## Shared libraries -LT_STATIC_EXEC=@LT_STATIC_EXEC@ -DYNAMIC_DIRS=@DYNAMIC_DIRS@ -LT=$(top_builddir)/libtool -LT_COMPILE=$(LT) --mode=compile $(CXX) -LT_LINK_LIB=$(LT) --mode=link $(CXX) -static -rpath $(libdir) $(DYNAMIC_DIRS) -LT_LINK_EXE=$(LT) --mode=link $(CXX) -static $(LT_STATIC_EXEC) -dlopen self -rpath $(bindir) $(DYNAMIC_DIRS) -LT_RUN=$(LT) --mode=execute -LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM) -LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA) -LT_UNINSTALL=$(LT) --mode=uninstall $(RM) - -## Optional variables. We must declare them here because Irix pmake -## complains if it sees a reference to a variable which has never been -## defined. The main makefile is free to redefine these to something else. -DOCDIR=$(docdir) -EXAMPLEDIR=$(docdir)/hdf5/examples/c++ -LIB= -LIB_SRC= -LIB_OBJ= -PUB_HDR= -PUB_PROGS= -PUB_DOCS= -PROGS= -TEST_PROGS= -TEST_FLAGS= -TEST_SCRIPTS= -AUX_LIB= -EXAMPLE_PROGS= -SUBDIRS= -LIBHDF5= - -## The default is to build the library and/or programs. We must build -## them sequentially. -all: - $(MAKE) lib - $(MAKE) progs - $(MAKE) tests - -## The following rules insure that the Makefile is up-to-date by rerunning -## various autoconf components (although not all versions of make assume -## that the makefile is implicitly a target). We use time stamp files to -## keep track of the most recent update of H5config.h.in and H5config.h -## because autoheader and config.status don't update the modification time -## if the contents don't change. -## Invoke it by "gmake reconfigure". -## -## Graphically, the dependencies are: -## -## configure.in -## | | -## +-----------------+ +------------+ -## | | -## stamp1 configure -## (H5config.h.in) | -## | | | -## | +---------------+ +-----------+ -## | | | -## | config.status -## | | -## | +------------------+ -## | | -## stamp2 -## (H5config.h) Makefile.in et al -## | | -## +------------------+ +-----------+ -## | | -## Makefile -## -## A side effect of updating stamp1 is to generate H5config.h.in and a -## side effect of updating stamp2 is to generate H5config.h. When using -## a version of make that doesn't treat the makefile as the initial target -## the user may want to occassionally type `make Makefile' in any source -## directory. -## The `Makefile' target has been renamed to `reconfigure' so that the -## autoconf and make depend processes do not start up automatically. -## One must do `make reconfigure' explicitedly to start the process. -## (When srcdir is used and if more than one machines are running, -## this automatic Makefile/autoconf can get things unstable.) -## -STAMP1=$(top_builddir)/config/stamp1 -STAMP2=$(top_builddir)/config/stamp2 - -MAKEFILE_PARTS=$(srcdir)/Makefile.in \ - $(top_srcdir)/config/commence.in \ - $(top_srcdir)/config/conclude.in \ - $(top_srcdir)/config/depend1.in \ - $(top_srcdir)/config/depend2.in \ - $(top_srcdir)/config/depend3.in \ - $(top_srcdir)/config/depend4.in \ - $(top_srcdir)/config/dependN.in - -$(STAMP1): $(top_srcdir)/configure.in - touch $(STAMP1) - -cd $(top_srcdir); autoheader - -$(STAMP2): $(STAMP1) $(top_builddir)/config.status - touch $(STAMP2) - -cd $(top_builddir); \ - CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status - -$(top_srcdir)/configure: $(top_srcdir)/configure.in - -cd $(top_srcdir); autoconf - -$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) - -cd $(top_builddir); ./config.status --recheck - -# rerun the autoconf process if any configure components have changed. -reconfigure: $(MAKEFILE_PARTS) $(STAMP2) - -cd $(top_builddir); CONFIG_HEADERS= ./config.status - -##----------------------------------------------------------------------------- -## The following section of this makefile comes from the middle of -## `Makefile.in' from this directory. It was generated by running -## `config.status'. -##----------------------------------------------------------------------------- diff --git a/c++/config/conclude.in b/c++/config/conclude.in deleted file mode 100644 index 1b62ea9..0000000 --- a/c++/config/conclude.in +++ /dev/null @@ -1,175 +0,0 @@ -##------------------------------------------------------------ -*- makefile -*- -## The following section of this makefile comes from the -## `./config/conclude' file which was generated with config.status -## from `./config/conclude.in'. -##----------------------------------------------------------------------------- - -## This is the target for the library described in the main body of the -## makefile. -## -lib: $(LIB) -$(LIB) __no_library__: $(LIB_OBJ) - @$(LT_LINK_LIB) -o $@ $(CXXFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS) - -progs: $(LIB) $(PROGS) - -## Build a tags file in this directory. -TAGS: $(LIB_SRC) - $(RM) $@ - -etags $(LIB_SRC) - -## Runs each test in order, passing $(TEST_FLAGS) to the program. -## Since tests are done in a shell loop, "make -i" does apply inside it. -## Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. -tests: $(TEST_PROGS) $(LIB) -check test _test: tests - @for test in $(TEST_PROGS) dummy; do \ - if test $$test != dummy; then \ - echo ""; \ - echo "====================================="; \ - echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ - echo "====================================="; \ - echo ""; \ - srcdir="$(srcdir)" \ - ./$$test $(TEST_FLAGS) || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - break; \ - fi; \ - done; \ - test $$test = dummy || false - @for test in $(TEST_SCRIPTS) dummy; do \ - if test $$test != dummy; then \ - echo ""; \ - echo "====================================="; \ - echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ - echo "====================================="; \ - echo ""; \ - srcdir="$(srcdir)" \ - /bin/sh $$test $(TEST_FLAGS) || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - break; \ - fi; \ - done; \ - test $$test = dummy || false - -## Make installation directories directories if they don't exist. -$(libdir): - $(top_srcdir)/bin/mkdirs $@ - -$(includedir): - $(top_srcdir)/bin/mkdirs $@ - -$(bindir): - $(top_srcdir)/bin/mkdirs $@ - -$(EXAMPLEDIR): - $(top_srcdir)/bin/mkdirs $@ - -## Install the library, the public header files, and public programs. -install: $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir) - @for f in X $(PUB_LIB); do \ - if test $$f != X; then \ - ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1); \ - fi; \ - done - @if test -f libhdf5.settings; then \ - (set -x; $(INSTALL_DATA) libhdf5.settings $(libdir)/. || exit 1); \ - fi - @for f in X $(PUB_HDR); do \ - if test $$f != X; then \ - if test -f $$f; then \ - (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1); \ - else \ - (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. || \ - exit 1); \ - fi; \ - fi; \ - done - @for f in X $(PUB_PROGS); do \ - if test $$f != X; then \ - ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1); \ - fi; \ - done - -install-examples: $(EXAMPLE_PROGS) $(EXAMPLEDIR) - @for f in X $(EXAMPLE_PROGS); do \ - if test $$f != X; then \ - (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\ - fi; \ - done - -uninstall-examples: - @if test -n "$(EXAMPLE_PROGS)"; then \ - set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROGS); \ - fi - -## Removes those things that `make install' (would have) installed. -uninstall: - @for f in libhdf5.settings $(LIB); do \ - $(LT_UNINSTALL) $(libdir)/$$f; \ - done - @if test -n "$(PUB_HDR)"; then \ - set -x; cd $(includedir) && $(RM) $(PUB_HDR); \ - fi - @for f in X $(PUB_PROGS); do \ - if test $$f != X; then \ - $(LT_UNINSTALL) $(bindir)/$$f; \ - fi; \ - done - -## Removes temporary files without removing the final target files. That is, -## remove things like object files but not libraries or executables. -## -mostlyclean: - @if test -n "$(LIB_OBJ)"; then \ - $(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o); \ - fi - @if test -n "$(TEST_OBJ)"; then \ - $(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o); \ - fi - @if test -n "$(PROG_OBJ)" -o -n "$(MOSTLYCLEAN)"; then \ - $(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN); \ - fi - -## Like `mostlyclean' except it also removes the final targets: things like -## libraries and executables. This target doesn't remove any file that -## is part of the HDF5 distribution. -## -clean: mostlyclean - @if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \ - $(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN); \ - fi - -$(RM) -r .libs - -## Like `clean' except it also removes files that were created by running -## configure. If you've unpacked the source and built HDF5 without creating -## any other files, then `make distclean' will leave only the files that were -## in the distribution. -## -distclean: clean - -$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN) - @if test -f $(srcdir)/Makefile.in; then \ - (set -x; $(RM) Makefile); \ - fi - -## Like `distclean' except it deletes all files that can be regenerated from -## the makefile, including those generated from autoheader and autoconf. -## -maintainer-clean: distclean - -$(RM) *~ core core.* *.core *.bak *.contrib gmon.out - -## Implicit rules -.cpp.o: - $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c $< - -.cpp.lo: - @$(LT_COMPILE) $(CXXFLAGS) $(CPPFLAGS) -c $< - -##----------------------------------------------------------------------------- -## The following section of this makefile contains dependencies between the -## source files and the header files. -##----------------------------------------------------------------------------- -.PHONY: dep depend -dep depend: $(srcdir)/Dependencies - -@DEPEND@ diff --git a/c++/config/depend1.in b/c++/config/depend1.in deleted file mode 100644 index eaa7488..0000000 --- a/c++/config/depend1.in +++ /dev/null @@ -1,51 +0,0 @@ -## -*- makefile -*- - -## We keep a list of dependencies in `.depend' for each of the source -## files on which it depends. When one of the source files is modified -## we remove its record from .depend and regenerate its dependencies, -## tacking them onto the end of .depend. By including the .depend file -## into the makefile, we're telling make that the makefile depends on -## the dependency list in the .depend file. -## -## This is as fast as the `.d' method described in the GNU make manual -## for automatic dependencies, but has the added advantage that all -## dependencies are stored in one place. The advantage over the -## `makedepend' program is that only those files that are out of date -## have dependency information rebuilt, and the Makefile is not -## modified. -## -## This is also where tracing information is updated. The $(TRACE) -## program is run on each source file to make sure that the H5TRACE() -## macros are up to date. If they are then the file is not modified, -## otherwise the file is changed and a backup is saved by appending a -## tilde to the file name. -## -$(srcdir)/Dependencies: .depend - @if test "$(srcdir)" != "."; then \ - echo '## This file is machine generated on GNU systems.' >$@; \ - echo '## Only temporary changes may be made here.' >>$@; \ - echo >>$@; \ - $(PERL) -p $(top_srcdir)/bin/distdep .depend >>$@; \ - else \ - echo 'Dependencies cannot be built when $$srcdir == $$builddir'; \ - fi - -.depend: $(LIB_SRC) $(TEST_SRC) $(PROG_SRC) - @touch .depend - @for dep in $? dummy; do \ - if test $$dep != "dummy" -a -n "$(PERL)"; then \ - case "$$dep" in \ - *.c) \ - echo Building dependencies for $$dep; \ - obj=`basename $$dep .c`.lo; \ - sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@; \ - $(TRACE) $$dep; \ - $(CC) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@; \ - $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir) --top_builddir=$(top_builddir) $@; \ - ;; \ - esac; \ - fi; \ - done - --include .depend - diff --git a/c++/config/depend2.in b/c++/config/depend2.in deleted file mode 100644 index f67914f..0000000 --- a/c++/config/depend2.in +++ /dev/null @@ -1,11 +0,0 @@ -## -*- makefile -*- - -## This platform doesn't support automatic dependencies because we're -## not using GNU gcc. GNU gcc is needed in order to generate the list -## of header files included by a source file. - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - --include $(srcdir)/Dependencies diff --git a/c++/config/depend3.in b/c++/config/depend3.in deleted file mode 100644 index e856bc5..0000000 --- a/c++/config/depend3.in +++ /dev/null @@ -1,7 +0,0 @@ -## -*- makefile -*- - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - -.include <$(srcdir)/Dependencies> diff --git a/c++/config/depend4.in b/c++/config/depend4.in deleted file mode 100644 index b0324d9..0000000 --- a/c++/config/depend4.in +++ /dev/null @@ -1,7 +0,0 @@ -## -*- makefile -*- - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - -include $(srcdir)/Dependencies diff --git a/c++/config/dependN.in b/c++/config/dependN.in deleted file mode 100644 index 7ece270..0000000 --- a/c++/config/dependN.in +++ /dev/null @@ -1,4 +0,0 @@ -## -*- makefile -*- - -## Automatic dependencies are not being used and we cannot include other -## files. diff --git a/c++/config/hpux11.00 b/c++/config/hpux11.00 deleted file mode 100644 index 0485e2d..0000000 --- a/c++/config/hpux11.00 +++ /dev/null @@ -1,24 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -if test -z "$CXX"; then - CXX=aCC - CXX_BASENAME=aCC -fi - -if test -z "$cxx_flags_set"; then -# +Z for PIC, +A for using archived libraries - CXXFLAGS="+Z +A" - CFLAGS="-g +O2" - DEBUG_CXXFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CPPFLAGS= - cxx_flags_set=yes -fi diff --git a/c++/config/irix6.x b/c++/config/irix6.x deleted file mode 100644 index dad44c5..0000000 --- a/c++/config/irix6.x +++ /dev/null @@ -1,34 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details - -# The default compiler is `MIPSpro CC' -if test -z "$CXX"; then - CXX=CC - CXX_BASENAME=CC -fi - -# Try native compiler flags -if test -z "$cxx_flags_set"; then -# -LANG:std required for std use; -ptused causes templates used to be -# instantiated - CPPFLAGS="-LANG:std -ptused" - -# libCio is a default library, since libtool before 1.5 doesn't fully -# support C++ yet, default libraries must be explicitly specified. -# A new macro is used for this temporary and specific task so it -# won't polute the existing configuration - DEFAULT_LIBS="-lCio" - - DEBUG_CXXFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS=-xpg - PROFILE_CPPFLAGS= - cxx_flags_set=yes -fi diff --git a/c++/config/linux-gnu b/c++/config/linux-gnu deleted file mode 100644 index d139966..0000000 --- a/c++/config/linux-gnu +++ /dev/null @@ -1,4 +0,0 @@ -# -*- shell-script -*- -# This is the same as linux-gnulibc1 - -. $srcdir/config/linux-gnulibc1 diff --git a/c++/config/linux-gnulibc1 b/c++/config/linux-gnulibc1 deleted file mode 100644 index 4b7ac40..0000000 --- a/c++/config/linux-gnulibc1 +++ /dev/null @@ -1,16 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# The default compiler is `g++'. -if test -z "$CXX"; then - CXX=g++ - CXX_BASENAME=g++ -fi - -# Figure out compiler flags -#. $srcdir/config/gnu-flags diff --git a/c++/config/linux-gnulibc2 b/c++/config/linux-gnulibc2 deleted file mode 100644 index 4551fb6..0000000 --- a/c++/config/linux-gnulibc2 +++ /dev/null @@ -1,10 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Same as with gnulibc1 for now -. $srcdir/config/linux-gnulibc1 diff --git a/c++/config/powerpc-ibm-aix b/c++/config/powerpc-ibm-aix deleted file mode 100644 index f9086a0..0000000 --- a/c++/config/powerpc-ibm-aix +++ /dev/null @@ -1,10 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Use AIX supplied C++ compiler by default. -CXX=${CXX=xlC} diff --git a/c++/config/rs6000-ibm-aix4.x b/c++/config/rs6000-ibm-aix4.x deleted file mode 100644 index 770ba80..0000000 --- a/c++/config/rs6000-ibm-aix4.x +++ /dev/null @@ -1,11 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Cross compiling defaults -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/solaris2.x b/c++/config/solaris2.x deleted file mode 100644 index 8c7b593..0000000 --- a/c++/config/solaris2.x +++ /dev/null @@ -1,44 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details - -# The default compiler is `sunpro cc' -if test -z "$CXX"; then - CXX=CC - CXX_BASENAME=CC -fi - -# Try gcc compiler flags -#. $srcdir/config/gnu-flags - -cxx_version="`$CXX -V 2>&1 |grep 'WorkShop' |\ - sed 's/.*WorkShop.*C\+\+ \([0-9\.]*\).*/\1/'`" - -cxx_vers_major=`echo $cxx_version | cut -f1 -d.` -cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` -cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` - -# Specify the "-features=tmplife" if the compiler can handle this... -if test -n "$cxx_version"; then - if test $cxx_vers_major -ge 5 -a $cxx_vers_minor -ge 3 -o $cxx_vers_major -gt 5; then - CXXFLAGS="-features=tmplife" - fi -fi - -# Try solaris native compiler flags -if test -z "$cxx_flags_set"; then - CXXFLAGS="$CXXFLAGS -instances=global" - CPPFLAGS="-LANG:std" - LIBS="$LIBS -lsocket" - DEBUG_CXXFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS=-xpg - PROFILE_CPPFLAGS= - cxx_flags_set=yes -fi diff --git a/c++/config/sv1-cray b/c++/config/sv1-cray deleted file mode 100644 index ff225c2..0000000 --- a/c++/config/sv1-cray +++ /dev/null @@ -1,126 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C++ Compiler -# ----------------------- -# -# The user should be able to specify the compiler by setting the CXX -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CXX is unset then this script may -# set it. If CXX is unset by time this script completes then configure -# will try `g++' and `CC' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CXX_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - - -# C++ Compiler and Preprocessor Flags -# ----------------------------------- -# -# Flags that end with `_CXXFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CXXFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CXXFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CXXFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CXXFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CXX_BASENAME which is the base name of the -# first word in $CXX (note that the value of CXX may have changed -# above). - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/unicos10.0.X b/c++/config/unicos10.0.X deleted file mode 100644 index ff225c2..0000000 --- a/c++/config/unicos10.0.X +++ /dev/null @@ -1,126 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C++ Compiler -# ----------------------- -# -# The user should be able to specify the compiler by setting the CXX -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CXX is unset then this script may -# set it. If CXX is unset by time this script completes then configure -# will try `g++' and `CC' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CXX_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - - -# C++ Compiler and Preprocessor Flags -# ----------------------------------- -# -# Flags that end with `_CXXFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CXXFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CXXFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CXXFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CXXFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CXX_BASENAME which is the base name of the -# first word in $CXX (note that the value of CXX may have changed -# above). - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/config/unicosmk2.0.6.X b/c++/config/unicosmk2.0.6.X deleted file mode 100644 index ff225c2..0000000 --- a/c++/config/unicosmk2.0.6.X +++ /dev/null @@ -1,126 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C++ Compiler -# ----------------------- -# -# The user should be able to specify the compiler by setting the CXX -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CXX is unset then this script may -# set it. If CXX is unset by time this script completes then configure -# will try `g++' and `CC' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CXX_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test -z "$CXX"; then - CXX="CC" - CXX_BASENAME=CC -fi - - -# C++ Compiler and Preprocessor Flags -# ----------------------------------- -# -# Flags that end with `_CXXFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CXXFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CXXFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CXXFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CXXFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CXX_BASENAME which is the base name of the -# first word in $CXX (note that the value of CXX may have changed -# above). - -case $CXX_BASENAME in - g++) - CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CXXFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CXXFLAGS="$CXXFLAGS -h instantiate=used" - DEBUG_CXXFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CXXFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CXXFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/c++/configure b/c++/configure deleted file mode 100755 index 3160f90..0000000 --- a/c++/configure +++ /dev/null @@ -1,10529 +0,0 @@ -#! /bin/sh -# From configure.in Id: configure.in. -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53 for HDF5 C++ 1.7.1. -# -# Report bugs to . -# -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - - -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# NLS nuisances. -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } - - -# Name of the executable. -as_me=`(basename "$0") 2>/dev/null || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conftest.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='HDF5 C++' -PACKAGE_TARNAME='hdf5-c--' -PACKAGE_VERSION='1.7.1' -PACKAGE_STRING='HDF5 C++ 1.7.1' -PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' - -ac_unique_file="src/H5Library.cpp" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures HDF5 C++ 1.7.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 C++ 1.7.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-production Determines how to run the compiler. - --enable-static-exec Build only statically linked executables - [default=no] - --enable-linux-lfs Enable support for large (64-bit) files on Linux. - [default=check] - --enable-stream-vfd Build the Stream Virtual File Driver [default=no] - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both - --with-zlib=DIR Use zlib library for external deflate I/O filter - [default=yes] - --with-szlib=DIR Use szlib library for external szlib I/O filter - [default=yes] - -Some influential environment variables: - CXX C++ compiler command - CXXFLAGS C++ compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CXXCPP C++ preprocessor - CC C compiler command - CFLAGS C compiler flags - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -HDF5 C++ configure 1.7.1 -generated by GNU Autoconf 2.53 - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by HDF5 C++ $as_me 1.7.1, which was -generated by GNU Autoconf 2.53. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell meta-characters. -ac_configure_args= -ac_sep= -for ac_arg -do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n ) continue ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - esac - # Get rid of the leading space. -done - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core core.* *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - -ac_aux_dir= -for ac_dir in ../bin $srcdir/../bin; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - - - -echo "$as_me:$LINENO: checking shell variables initial values" >&5 -echo $ECHO_N "checking shell variables initial values... $ECHO_C" >&6 -set >&5 -echo "$as_me:$LINENO: result: done" >&5 -echo "${ECHO_T}done" >&6 - -if test -x "/bin/pwd"; then - pwd=/bin/pwd -else - pwd=pwd -fi - ROOT=`$pwd` - -echo "$as_me:$LINENO: checking for cached host" >&5 -echo $ECHO_N "checking for cached host... $ECHO_C" >&6 -if test "${hdf5_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - hdf5_cv_host="none" -fi -echo "$as_me:$LINENO: result: $hdf5_cv_host" >&5 -echo "${ECHO_T}$hdf5_cv_host" >&6; -if test "X$hdf5_cv_host" = "Xnone"; then - hdf5_cv_host=$host -elif test "$hdf5_cv_host" != "$host"; then - echo "The config.cache file was generated on $hdf5_cv_host but" - echo "this is $host. Please remove that file and try again." - { { echo "$as_me:$LINENO: error: config.cache file is invalid" >&5 -echo "$as_me: error: config.cache file is invalid" >&2;} - { (exit 1); exit 1; }; } -fi - -case "$host_os" in - aix*) - host_os_novers=aix - ;; - freebsd*) - host_os_novers=freebsd - ;; - irix5.*) - host_os_novers=irix5.x - ;; - irix6.*) - host_os_novers=irix6.x - ;; - osf4.*) - host_os_novers=osf4.x - ;; - osf5.*) - host_os_novers=osf5.x - ;; - solaris2.*) - host_os_novers=solaris2.x - ;; - *) - host_os_novers=$host_os - ;; -esac - - DEFAULT_LIBS="" - -host_config="none" -for f in $host_cpu-$host_vendor-$host_os \ - $host_cpu-$host_vendor-$host_os_novers \ - $host_vendor-$host_os \ - $host_vendor-$host_os_novers \ - $host_cpu-$host_os \ - $host_cpu-$host_os_novers \ - $host_cpu-$host_vendor \ - $host_os \ - $host_os_novers \ - $host_vendor \ - $host_cpu ; do - echo "$as_me:$LINENO: checking for config $f" >&5 -echo $ECHO_N "checking for config $f... $ECHO_C" >&6 - if test -f $srcdir/config/$f; then - host_config=$srcdir/config/$f - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 - break - fi - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -done -if test "X$host_config" != "Xnone"; then - CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`" - . $host_config -fi - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CXX" && break -done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - - CXX=$ac_ct_CXX -fi - - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C++ compiler default output" >&5 -echo $ECHO_N "checking for C++ compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; - ls a.out conftest 2>/dev/null; - ls a.* conftest.* 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool --akim. - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables" >&5 -echo "$as_me: error: C++ compiler cannot create executables" >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5 -echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'." >&5 -echo "$as_me: error: cannot run C++ compiled programs. -If you meant to cross compile, use \`--host'." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_prog_cxx_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`" -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="${MAKE}"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi; -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$as_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - - -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" - -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi - -NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 -fi - -echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 -echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; -esac - -fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method - - - - - - - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output" >&5 -echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#include -#include -#include - -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4408 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$as_me:$LINENO: result: $objdir" >&5 -echo "${ECHO_T}$objdir" >&6 - - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_pic+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - #################################################################### - ## HACK Alert! This is causing problems with C++ on SP3...We'll just - ## remove this...THERE! All better now. - #################################################################### - ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - : - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - if test "x$host_vendor" = xsni; then - lt_cv_prog_cc_wl='-LD' - else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi - -fi - -if test -z "$lt_cv_prog_cc_pic"; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -else - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 - - # Check to make sure the pic_flag actually works. - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 - if test "${lt_cv_prog_cc_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 - lt_cv_prog_cc_pic_works=no - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - -fi - - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - -echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_prog_cc_static_works=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi - - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:4949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -fi - -compiler_c_o=$lt_cv_compiler_c_o -echo "$as_me:$LINENO: result: $compiler_c_o" >&5 -echo "${ECHO_T}$compiler_c_o" >&6 - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 - if test "${lt_cv_compiler_o_lo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - -fi - - compiler_o_lo=$lt_cv_compiler_o_lo - echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 -echo "${ECHO_T}$compiler_o_lo" >&6 -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$compiler_rtti_exceptions" >&6 - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - ####################################################################### - # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue. - # The ``-b nolibpath -b ...'' flags were messing with the mpicc - # compiler's already defined library paths and it wasn't able to find - # the libraries it needed to run....DOH! - hname="`hostname`" - - case "$hname" in - *pacific.llnl.gov* | *s0*) - hardcode_libdir_flag_spec=' ' - ;; - *) - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - ;; - esac - # - # End MAJOR HACK - # - ####################################################################### - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [12].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -f = shl_load; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -f = dlopen; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - if test "${lt_cv_archive_cmds_need_lc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi -fi - - echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - PERL="" -if test "X$GCC" = "Xyes"; then - for ac_prog in perl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_PERL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$PERL"; then - ac_cv_prog_PERL="$PERL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_PERL="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -PERL=$ac_cv_prog_PERL -if test -n "$PERL"; then - echo "$as_me:$LINENO: result: $PERL" >&5 -echo "${ECHO_T}$PERL" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$PERL" && break -done - -fi - -if test -z "$AR"; then - for ac_prog in ar xar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AR" && break -done -test -n "$AR" || AR=":" - -fi - - -if test -z "$SEARCH"; then - echo "$as_me:$LINENO: checking how make searches directories" >&5 -echo $ECHO_N "checking how make searches directories... $ECHO_C" >&6 - while true; do #for break - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: VPATH=DIR1 DIR2 ..." >&5 -echo "${ECHO_T}VPATH=DIR1 DIR2 ..." >&6 - break - fi - - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=':' - echo "$as_me:$LINENO: result: VPATH=DIR1:DIR2:..." >&5 -echo "${ECHO_T}VPATH=DIR1:DIR2:..." >&6 - break - fi - - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='.PATH: ' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: .PATH: DIR1 DIR2 ..." >&5 -echo "${ECHO_T}.PATH: DIR1 DIR2 ..." >&6 - break - fi - - SEARCH_RULE='## SEARCH DISABLED: ' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: it doesn't" >&5 -echo "${ECHO_T}it doesn't" >&6 - if test ! -f configure; then - { { echo "$as_me:$LINENO: error: ${MAKE-make} requires the build and source directories to be the same" >&5 -echo "$as_me: error: ${MAKE-make} requires the build and source directories to be the same" >&2;} - { (exit 1); exit 1; }; } - fi - break - done - rm maketest -fi - -echo "$as_me:$LINENO: checking for production mode" >&5 -echo $ECHO_N "checking for production mode... $ECHO_C" >&6 -# Check whether --enable-production or --disable-production was given. -if test "${enable_production+set}" = set; then - enableval="$enable_production" - -fi; - -case "X-$enable_production" in - X-yes) - echo "$as_me:$LINENO: result: \"production\"" >&5 -echo "${ECHO_T}\"production\"" >&6 - - CXXFLAGS_temp="" - if test -n "$CXXFLAGS"; then - for d in $CXXFLAGS ; do - if test "X$d" != "X-g"; then - CXXFLAGS_temp="$CXXFLAGS_temp $d" - fi - done - CXXFLAGS=$CXXFLAGS_temp - fi - - CFLAGS_temp="" - if test -n "$CFLAGS"; then - for d in $CFLAGS ; do - if test "X$d" != "X-g"; then - CFLAGS_temp="$CFLAGS_temp $d" - fi - done - CFLAGS=$CFLAGS_temp - fi - - CONFIG_MODE=production - CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" - ;; - X-|X-no) - echo "$as_me:$LINENO: result: \"development\"" >&5 -echo "${ECHO_T}\"development\"" >&6 - CONFIG_MODE=development - CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" - ;; - X-pg|X-profile) - echo "$as_me:$LINENO: result: \"profile\"" >&5 -echo "${ECHO_T}\"profile\"" >&6 - CONFIG_MODE=profile - CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" - ;; - *) - echo "$as_me:$LINENO: result: \"user-defined\"" >&5 -echo "${ECHO_T}\"user-defined\"" >&6 - CONFIG_MODE="$X-enableval" - ;; -esac - - -echo "$as_me:$LINENO: checking for ceil in -lm" >&5 -echo $ECHO_N "checking for ceil in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_ceil+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char ceil (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -ceil (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_m_ceil=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_m_ceil=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_ceil" >&5 -echo "${ECHO_T}$ac_cv_lib_m_ceil" >&6 -if test $ac_cv_lib_m_ceil = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -fi - - -if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then - -echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 -echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_socket+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char socket (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -socket (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_socket=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_socket_socket=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 -if test $ac_cv_lib_socket_socket = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSOCKET 1 -_ACEOF - - LIBS="-lsocket $LIBS" - -fi - - -echo "$as_me:$LINENO: checking for xdr_int in -lnsl" >&5 -echo $ECHO_N "checking for xdr_int in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_xdr_int+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char xdr_int (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -xdr_int (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_xdr_int=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_nsl_xdr_int=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_xdr_int" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_xdr_int" >&6 -if test $ac_cv_lib_nsl_xdr_int = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBNSL 1 -_ACEOF - - LIBS="-lnsl $LIBS" - -fi - -fi - -echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5 -echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6 -# Check whether --enable-static_exec or --disable-static_exec was given. -if test "${enable_static_exec+set}" = set; then - enableval="$enable_static_exec" - STATIC_EXEC=$enableval -fi; - -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - LT_STATIC_EXEC="-all-static" -else - echo "no" - LT_STATIC_EXEC="" -fi - - -case "$host_cpu-$host_vendor-$host_os" in - *linux*) - # Check whether --enable-linux-lfs or --disable-linux-lfs was given. -if test "${enable_linux_lfs+set}" = set; then - enableval="$enable_linux_lfs" - -fi; - - LINUX_LFS="no" - case "X-$enable_linux_lfs" in - X-yes) - LINUX_LFS=yes - ;; - X-no) - ;; - X-|*) - MAJOR_VER="`uname -r | cut -d '.' -f1`" - MINOR_VER="`uname -r | cut -d '.' -f2`" - - if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then - LINUX_LFS="yes" - fi - ;; - esac - - echo "$as_me:$LINENO: checking for large file support mode on Linux" >&5 -echo $ECHO_N "checking for large file support mode on Linux... $ECHO_C" >&6 - if test "X$LINUX_LFS" = "Xyes"; then - echo "$as_me:$LINENO: result: enabled" >&5 -echo "${ECHO_T}enabled" >&6 - - CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS" - else - echo "$as_me:$LINENO: result: disabled" >&5 -echo "${ECHO_T}disabled" >&6 - fi - - CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS" - - CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS" - ;; -esac - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -echo "$as_me:$LINENO: checking if $CXX needs old style header files in includes" >&5 -echo $ECHO_N "checking if $CXX needs old style header files in includes... $ECHO_C" >&6 - -if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include - -int main(void) { return 0; } - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo no - -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) - - echo yes - CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" - -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - -echo "$as_me:$LINENO: checking if $CXX can handle namespaces" >&5 -echo $ECHO_N "checking if $CXX can handle namespaces... $ECHO_C" >&6 -if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -namespace H5 { -int fnord; -} - -int main(void) { - using namespace H5; - fnord = 37; - return 0; -} - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo yes - -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) - - echo no - CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" - -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - -echo "$as_me:$LINENO: checking if $CXX supports std" >&5 -echo $ECHO_N "checking if $CXX supports std... $ECHO_C" >&6 -if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include - -using namespace std; - -int main(void) { - string myString("testing namespace std"); - return 0; -} - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo yes - -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) - - echo no - CXXFLAGS="${CXXFLAGS} -DH5_NO_STD" - -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - -echo "$as_me:$LINENO: checking if $CXX supports bool types" >&5 -echo $ECHO_N "checking if $CXX supports bool types... $ECHO_C" >&6 -if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -int main(void) { - bool flag; - return 0; -} - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo yes - -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) - - echo no - CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED" - -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - -echo "$as_me:$LINENO: checking if $CXX can handle static cast" >&5 -echo $ECHO_N "checking if $CXX can handle static cast... $ECHO_C" >&6 -if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 -echo "$as_me: error: cannot run test program while cross compiling" >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -int main(void) { - float test_float; - int test_int; - test_float = 37.0; - test_int = static_cast (test_float); - return 0; -} - -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo yes - -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) - - echo no - CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" - -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - -# Check whether --with-zlib or --without-zlib was given. -if test "${with_zlib+set}" = set; then - withval="$with_zlib" - -else - withval=yes -fi; - -case $withval in - yes) - HAVE_ZLIB="yes" - - -for ac_header in zlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_ZLIB_H="yes" -fi - -done - - -echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 -echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 -if test "${ac_cv_lib_z_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -compress2 (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_z_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_z_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 -echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 -if test $ac_cv_lib_z_compress2 = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - unset HAVE_ZLIB -fi - - echo "$as_me:$LINENO: checking for compress2" >&5 -echo $ECHO_N "checking for compress2... $ECHO_C" >&6 -if test "${ac_cv_func_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_compress2) || defined (__stub___compress2) -choke me -#else -f = compress2; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5 -echo "${ECHO_T}$ac_cv_func_compress2" >&6 -if test $ac_cv_func_compress2 = yes; then - HAVE_COMPRESS2="yes" -fi - - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5 -echo "$as_me: error: couldn't find zlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; - no) - HAVE_ZLIB="no" - echo "$as_me:$LINENO: checking for GNU zlib" >&5 -echo $ECHO_N "checking for GNU zlib... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: suppressed" >&5 -echo "${ECHO_T}suppressed" >&6 - ;; - *) - HAVE_ZLIB="yes" - case "$withval" in - *,*) - zlib_inc="`echo $withval |cut -f1 -d,`" - zlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - zlib_inc="$withval/include" - zlib_lib="$withval/lib" - fi - ;; - esac - - if test "X$zlib_inc" = "X/usr/include"; then - zlib_inc="" - fi - if test "X$zlib_lib" = "X/usr/lib"; then - zlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$zlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$zlib_inc" - fi - - -for ac_header in zlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_ZLIB_H="yes" -else - CPPFLAGS="$saved_CPPFLAGS" -fi - -done - - - if test -n "$zlib_lib"; then - LDFLAGS="$LDFLAGS -L$zlib_lib" - fi - - -echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 -echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 -if test "${ac_cv_lib_z_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -compress2 (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_z_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_z_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 -echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 -if test $ac_cv_lib_z_compress2 = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB -fi - - echo "$as_me:$LINENO: checking for compress2" >&5 -echo $ECHO_N "checking for compress2... $ECHO_C" >&6 -if test "${ac_cv_func_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_compress2) || defined (__stub___compress2) -choke me -#else -f = compress2; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5 -echo "${ECHO_T}$ac_cv_func_compress2" >&6 -if test $ac_cv_func_compress2 = yes; then - HAVE_COMPRESS2="yes" -fi - - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5 -echo "$as_me: error: couldn't find zlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; -esac - -if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_DEFLATE 1 -_ACEOF - -fi - - -# Check whether --with-szlib or --without-szlib was given. -if test "${with_szlib+set}" = set; then - withval="$with_szlib" - -else - withval=yes -fi; - -case $withval in - yes) - HAVE_SZLIB="yes" - -for ac_header in szlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_SZLIB_H="yes" -fi - -done - - -echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5 -echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6 -if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -SZ_BufftoBuffCompress (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_sz_SZ_BufftoBuffCompress=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_sz_SZ_BufftoBuffCompress=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5 -echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6 -if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSZ 1 -_ACEOF - - LIBS="-lsz $LIBS" - -else - unset HAVE_SZLIB -fi - - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5 -echo "$as_me: error: couldn't find szlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; - no) - HAVE_SZLIB="no" - echo "$as_me:$LINENO: checking for szlib" >&5 -echo $ECHO_N "checking for szlib... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: suppressed" >&5 -echo "${ECHO_T}suppressed" >&6 - ;; - *) - HAVE_SZLIB="yes" - case "$withval" in - *,*) - szlib_inc="`echo $withval |cut -f1 -d,`" - szlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - szlib_inc="$withval/include" - szlib_lib="$withval/lib" - fi - ;; - esac - - if test "X$szlib_inc" = "X/usr/include"; then - szlib_inc="" - fi - if test "X$szlib_lib" = "X/usr/lib"; then - szlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$szlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$szlib_inc" - fi - - -for ac_header in szlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_SZLIB_H="yes" -else - CPPFLAGS="$saved_CPPFLAGS" -fi - -done - - - if test -n "$szlib_lib"; then - LDFLAGS="$LDFLAGS -L$szlib_lib" - fi - - -echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5 -echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6 -if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -SZ_BufftoBuffCompress (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_sz_SZ_BufftoBuffCompress=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_sz_SZ_BufftoBuffCompress=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5 -echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6 -if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSZ 1 -_ACEOF - - LIBS="-lsz $LIBS" - -else - LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB -fi - - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5 -echo "$as_me: error: couldn't find szlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; -esac - -if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_SZIP 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for Stream Virtual File Driver support" >&5 -echo $ECHO_N "checking for Stream Virtual File Driver support... $ECHO_C" >&6 -# Check whether --enable-stream-vfd or --disable-stream-vfd was given. -if test "${enable_stream_vfd+set}" = set; then - enableval="$enable_stream_vfd" - STREAM_VFD=$enableval -fi; - -if test "$STREAM_VFD" = "yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - - -for ac_header in netinet/tcp.h sys/filio.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STREAM 1 -_ACEOF - - - echo "$as_me:$LINENO: checking if socklen_t is defined" >&5 -echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -socklen_t foo; return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_SOCKLEN_T 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me:$LINENO: result: not configured" >&5 -echo "${ECHO_T}not configured" >&6 -fi - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overriden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if cmp -s $cache_file confcache; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -echo "$as_me:$LINENO: checking make" >&5 -echo $ECHO_N "checking make... $ECHO_C" >&6 - -if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ - sed -n 1p|cut -c1-8`" = "GNU Make"; then - echo "$as_me:$LINENO: result: GNU make" >&5 -echo "${ECHO_T}GNU make" >&6 - GMAKE=yes - if test "X$GCC" = "Xyes"; then - DEPEND=config/depend1 - else - DEPEND=config/depend2 - fi -else - echo "$as_me:$LINENO: result: generic" >&5 -echo "${ECHO_T}generic" >&6 -fi - -if test -z "$DEPEND"; then - echo "$as_me:$LINENO: checking how to include a makefile" >&5 -echo $ECHO_N "checking how to include a makefile... $ECHO_C" >&6 - - cat >makeinc <' >maketest - if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - echo "$as_me:$LINENO: result: .include " >&5 -echo "${ECHO_T}.include " >&6 - DEPEND=config/depend3 - break - fi - - echo 'include makeinc' >maketest - if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - echo "$as_me:$LINENO: result: include FILE" >&5 -echo "${ECHO_T}include FILE" >&6 - DEPEND=config/depend4 - break; - fi - - echo "$as_me:$LINENO: result: you have a deficient make command" >&5 -echo "${ECHO_T}you have a deficient make command" >&6 - DEPEND=config/dependN - break - done - rm makeinc maketest -fi - -rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files - -DYNAMIC_DIRS="" -if test -n "$LDFLAGS"; then - for d in $LDFLAGS ; do - case "$d" in - -L*) - d=`echo $d | sed -e 's/-L//g'` - case "$d" in - .*) - d=${ROOT}/$d - ;; - esac - DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS" - ;; - esac - done -fi - - - COMMENCE=config/commence - CONCLUDE=config/conclude - -if test -z "$SEARCH"; then - SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' - cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' - SEARCH="$SEARCH_RULE`eval $cmd`" -fi - -if test "X$GMAKE" = "Xyes"; then - SETX=":" -else - SETX="set -x" -fi - -rm -f conftest conftest.o conftest.c core core.* *.core dummy.o - - -saved_no_create=$no_create -no_create=yes -ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile src/h5c++ test/Makefile examples/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overriden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if cmp -s $cache_file confcache; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed - - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# NLS nuisances. -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } - - -# Name of the executable. -as_me=`(basename "$0") 2>/dev/null || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conftest.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by HDF5 C++ $as_me 1.7.1, which was -generated by GNU Autoconf 2.53. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -HDF5 C++ config.status 1.7.1 -configured by $0, generated by GNU Autoconf 2.53, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift - ;; - -*);; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_need_defaults=false;; - esac - - case $1 in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" - exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" - ac_need_defaults=false;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -_ACEOF - - - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "config/depend1" ) CONFIG_FILES="$CONFIG_FILES config/depend1" ;; - "config/depend2" ) CONFIG_FILES="$CONFIG_FILES config/depend2" ;; - "config/depend3" ) CONFIG_FILES="$CONFIG_FILES config/depend3" ;; - "config/depend4" ) CONFIG_FILES="$CONFIG_FILES config/depend4" ;; - "config/dependN" ) CONFIG_FILES="$CONFIG_FILES config/dependN" ;; - "config/commence" ) CONFIG_FILES="$CONFIG_FILES config/commence" ;; - "config/conclude" ) CONFIG_FILES="$CONFIG_FILES config/conclude" ;; - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "src/h5c++" ) CONFIG_FILES="$CONFIG_FILES src/h5c++" ;; - "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; - "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/cs$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ROOT@,$ROOT,;t t -s,@DEFAULT_LIBS@,$DEFAULT_LIBS,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@CPP@,$CPP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@PERL@,$PERL,;t t -s,@AR@,$AR,;t t -s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t -/@DEPEND@/r $DEPEND -s,@DEPEND@,,;t t -s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t -/@COMMENCE@/r $COMMENCE -s,@COMMENCE@,,;t t -/@CONCLUDE@/r $CONCLUDE -s,@CONCLUDE@,,;t t -s,@SEARCH@,$SEARCH,;t t -s,@SETX@,$SETX,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - -no_create=$saved_no_create - -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - -chmod 755 src/h5c++ diff --git a/c++/configure.in b/c++/configure.in deleted file mode 100644 index 6968f01..0000000 --- a/c++/configure.in +++ /dev/null @@ -1,812 +0,0 @@ -dnl ---------------------------------------------------------------------- -dnl Process this file with autoconf to produce configure. -dnl -dnl Copyright by the Board of Trustees of the University of Illinois. -dnl All rights reserved. -dnl -dnl This file is part of HDF5. The full HDF5 copyright notice, including -dnl terms governing use, modification, and redistribution, is contained in -dnl the files COPYING and Copyright.html. COPYING can be found at the root -dnl of the source code distribution tree; Copyright.html can be found at the -dnl root level of an installed copy of the electronic HDF5 document set and -dnl is linked from the top-level documents page. It can also be found at -dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -dnl -dnl ---------------------------------------------------------------------- - -dnl ---------------------------------------------------------------------- -dnl Initialize configure. -dnl -AC_REVISION($Id$) - -dnl AC_INIT takes the name of the package, the version number, and an -dnl email address to report bugs. AC_CONFIG_SRCDIR takes a unique file -dnl as its argument. -dnl -dnl NOTE: Don't forget to change the version number here when we do a -dnl release!!! -dnl -AC_INIT([HDF5 C++], [1.7.1], [hdfhelp@ncsa.uiuc.edu]) -AC_CONFIG_SRCDIR([src/H5Library.cpp]) -AC_CONFIG_AUX_DIR([../bin]) - -AC_CANONICAL_HOST -AC_SUBST(CPPFLAGS) - -dnl ---------------------------------------------------------------------- -dnl Dump all shell variables values. -dnl -AC_MSG_CHECKING(shell variables initial values) -set >&5 -AC_MSG_RESULT(done) - -dnl ---------------------------------------------------------------------- -dnl Where is the root of the source tree. Give an absolute address so -dnl we can find it no matter which directory of the distribution is our -dnl current directory. The built-in pwd fails on some systems, but the -dnl /bin/pwd version works OK. -dnl -if test -x "/bin/pwd"; then - pwd=/bin/pwd -else - pwd=pwd -fi -AC_SUBST(ROOT) ROOT=`$pwd` - -dnl ---------------------------------------------------------------------- -dnl Check that the cache file was build on the same host as what we're -dnl running on now. -dnl -AC_CACHE_CHECK(for cached host,hdf5_cv_host,hdf5_cv_host="none"); -if test "X$hdf5_cv_host" = "Xnone"; then - hdf5_cv_host=$host -elif test "$hdf5_cv_host" != "$host"; then - echo "The config.cache file was generated on $hdf5_cv_host but" - echo "this is $host. Please remove that file and try again." - AC_MSG_ERROR(config.cache file is invalid) -fi - -dnl ---------------------------------------------------------------------- -dnl Source any special files that we need. These files normally aren't -dnl present but can be used by the maintainers to fine tune things like -dnl turning on debug or profiling flags for the compiler. The search order -dnl is: -dnl -dnl CPU-VENDOR-OS -dnl VENDOR-OS -dnl CPU-OS -dnl CPU-VENDOR -dnl OS -dnl VENDOR -dnl CPU -dnl -dnl If the `OS' ends with a version number then remove it. For instance, -dnl `freebsd3.1' would become `freebsd' -case "$host_os" in - aix*) - host_os_novers=aix - ;; - freebsd*) - host_os_novers=freebsd - ;; - irix5.*) - host_os_novers=irix5.x - ;; - irix6.*) - host_os_novers=irix6.x - ;; - osf4.*) - host_os_novers=osf4.x - ;; - osf5.*) - host_os_novers=osf5.x - ;; - solaris2.*) - host_os_novers=solaris2.x - ;; - *) - host_os_novers=$host_os - ;; -esac - -dnl Different compilers may need default libraries. They are specified in -dnl the config/* files, so we put this statement here so that it'll be -dnl set by the code which follows... -dnl -AC_SUBST(DEFAULT_LIBS) DEFAULT_LIBS="" - -host_config="none" -for f in $host_cpu-$host_vendor-$host_os \ - $host_cpu-$host_vendor-$host_os_novers \ - $host_vendor-$host_os \ - $host_vendor-$host_os_novers \ - $host_cpu-$host_os \ - $host_cpu-$host_os_novers \ - $host_cpu-$host_vendor \ - $host_os \ - $host_os_novers \ - $host_vendor \ - $host_cpu ; do - AC_MSG_CHECKING(for config $f) - if test -f $srcdir/config/$f; then - host_config=$srcdir/config/$f - AC_MSG_RESULT(found) - break - fi - AC_MSG_RESULT(no) -done -if test "X$host_config" != "Xnone"; then - CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`" - . $host_config -fi - -dnl ---------------------------------------------------------------------- -dnl Check for programs. -dnl -AC_PROG_CXX -AC_PROG_CXXCPP dnl this is checked for when AC_HEADER_STDC is done -CXX_BASENAME="`echo $CXX |cut -f1 -d' ' |xargs basename 2>/dev/null`" -AC_PROG_MAKE_SET -AC_PROG_INSTALL -AM_PROG_LIBTOOL - -dnl ---------------------------------------------------------------------- -dnl Check if they have Perl installed on their system. We only need Perl -dnl if they're using a GNU compiler. -dnl -AC_SUBST(PERL) PERL="" -if test "X$GCC" = "Xyes"; then - AC_CHECK_PROGS(PERL, perl,, $PATH) -fi - -dnl ---------------------------------------------------------------------- -dnl Check which archiving tool to use. This needs to be done before -dnl the AM_PROG_LIBTOOL macro. -dnl -if test -z "$AR"; then - AC_CHECK_PROGS(AR,ar xar,:,$PATH) -fi -AC_SUBST(AR) - -dnl ---------------------------------------------------------------------- -dnl Sometimes makes think the `.PATH:' appearing before the first rule -dnl with an action should override the `all' default target. So we have -dnl to decide what the proper syntax is. -dnl -if test -z "$SEARCH"; then - AC_MSG_CHECKING(how make searches directories) - while true; do #for break - dnl The most common method is `VPATH=DIR1 DIR2 ...' - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=' ' - AC_MSG_RESULT([VPATH=DIR1 DIR2 ...]) - break - fi - - dnl The second most common method is like above except with the - dnl directories separated by colons. - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=':' - AC_MSG_RESULT([VPATH=DIR1:DIR2:...]) - break - fi - - dnl pmake uses the construct `.PATH: DIR1 DIR2 - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='.PATH: ' - SEARCH_SEP=' ' - AC_MSG_RESULT([.PATH: DIR1 DIR2 ...]) - break - fi - - dnl No way for make to search directories - SEARCH_RULE='## SEARCH DISABLED: ' - SEARCH_SEP=' ' - AC_MSG_RESULT([it doesn't]) - if test ! -f configure; then - AC_MSG_ERROR(${MAKE-make} requires the build and source directories to be the same) - fi - break - done - rm maketest -fi - -dnl ---------------------------------------------------------------------- -dnl Production flags? Save the value in $CONFIG_MODE so we have it for -dnl the record. -dnl -AC_MSG_CHECKING([for production mode]) -AC_ARG_ENABLE([production], - [AC_HELP_STRING([--enable-production], - [Determines how to run the compiler.])]) - -case "X-$enable_production" in - X-yes) - AC_MSG_RESULT("production") - - dnl Remove the "-g" flag from CFLAGS & CXXFLAGS if it's in there. - dnl - CXXFLAGS_temp="" - if test -n "$CXXFLAGS"; then - for d in $CXXFLAGS ; do - if test "X$d" != "X-g"; then - CXXFLAGS_temp="$CXXFLAGS_temp $d" - fi - done - CXXFLAGS=$CXXFLAGS_temp - fi - - CFLAGS_temp="" - if test -n "$CFLAGS"; then - for d in $CFLAGS ; do - if test "X$d" != "X-g"; then - CFLAGS_temp="$CFLAGS_temp $d" - fi - done - CFLAGS=$CFLAGS_temp - fi - - CONFIG_MODE=production - CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" - ;; - X-|X-no) - AC_MSG_RESULT("development") - CONFIG_MODE=development - CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" - ;; - X-pg|X-profile) - AC_MSG_RESULT("profile") - CONFIG_MODE=profile - CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS" - CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" - ;; - *) - AC_MSG_RESULT("user-defined") - CONFIG_MODE="$X-enableval" - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Check for system libraries. -dnl -AC_CHECK_LIB([m], [ceil]) - -if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then - dnl ...for Solaris - AC_CHECK_LIB([socket], [socket]) - AC_CHECK_LIB([nsl], [xdr_int]) -fi - -dnl ---------------------------------------------------------------------- -dnl If we should build only static executables -dnl -AC_MSG_CHECKING([if should build only statically linked executables]) -AC_ARG_ENABLE([static_exec], - [AC_HELP_STRING([--enable-static-exec], - [Build only statically linked executables - [default=no]])], - STATIC_EXEC=$enableval) - -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - LT_STATIC_EXEC="-all-static" -else - echo "no" - LT_STATIC_EXEC="" -fi -AC_SUBST(LT_STATIC_EXEC) - -dnl ---------------------------------------------------------------------- -dnl Test for 64bit stuff before the data types and their sizes. The -dnl result could effect the outcome of the sizeof macros below. -dnl -case "$host_cpu-$host_vendor-$host_os" in - *linux*) - dnl ---------------------------------------------------------------------- - dnl Enable large file support on linux? Store the result in the LINUX_LFS - dnl variable for posterity - AC_ARG_ENABLE([linux-lfs], - [AC_HELP_STRING([--enable-linux-lfs], - [Enable support for large (64-bit) - files on Linux. [default=check]])]) - - LINUX_LFS="no" - case "X-$enable_linux_lfs" in - X-yes) - LINUX_LFS=yes - ;; - X-no) - ;; - X-|*) - MAJOR_VER="`uname -r | cut -d '.' -f1`" - MINOR_VER="`uname -r | cut -d '.' -f2`" - - if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then - LINUX_LFS="yes" - fi - ;; - esac - - AC_MSG_CHECKING([for large file support mode on Linux]) - if test "X$LINUX_LFS" = "Xyes"; then - AC_MSG_RESULT(enabled) - - CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS" - else - AC_MSG_RESULT(disabled) - fi - - dnl Add POSIX support on Linux systems, so defines - dnl __USE_POSIX, which is required to get the prototype for fdopen - dnl defined correctly in - CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS" - - dnl Also add BSD support on Linux systems, so defines - dnl __USE_BSD, which is required to get the prototype for strdup - dnl defined correctly in and snprintf & vsnprintf defined - dnl correctly in - CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS" - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Checks for compiler characteristics. -dnl -AC_LANG_CPLUSPLUS - -AC_MSG_CHECKING(if $CXX needs old style header files in includes) -AC_TRY_RUN([ -#include - -int main(void) { return 0; } -], [ - echo no -], [ - echo yes - CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" -]) - -AC_MSG_CHECKING(if $CXX can handle namespaces) -AC_TRY_RUN([ -namespace H5 { -int fnord; -} - -int main(void) { - using namespace H5; - fnord = 37; - return 0; -} -], [ - echo yes -], [ - echo no - CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" -]) - -AC_MSG_CHECKING(if $CXX supports std) -AC_TRY_RUN([ -#include - -using namespace std; - -int main(void) { - string myString("testing namespace std"); - return 0; -} -], [ - echo yes -], [ - echo no - CXXFLAGS="${CXXFLAGS} -DH5_NO_STD" -]) - -AC_MSG_CHECKING(if $CXX supports bool types) -AC_TRY_RUN([ -int main(void) { - bool flag; - return 0; -} -], [ - echo yes -], [ - echo no - CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED" -]) - -AC_MSG_CHECKING(if $CXX can handle static cast) -AC_TRY_RUN([ -int main(void) { - float test_float; - int test_int; - test_float = 37.0; - test_int = static_cast (test_float); - return 0; -} -], [ - echo yes -], [ - echo no - CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" -]) - -dnl ---------------------------------------------------------------------- -dnl Checks for libraries. -dnl - -dnl ---------------------------------------------------------------------- -dnl Is the GNU zlib present? It has a header file `zlib.h' and a library -dnl `-lz' and their locations might be specified with the `--with-zlib' -dnl command-line switch. The value is an include path and/or a library path. -dnl If the library path is specified then it must be preceded by a comma. -dnl -AC_ARG_WITH([zlib], - [AC_HELP_STRING([--with-zlib=DIR], - [Use zlib library for external deflate I/O - filter [default=yes]])],, - withval=yes) - -case $withval in - yes) - HAVE_ZLIB="yes" - AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"]) - AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB]) - AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find zlib library]) - fi - ;; - no) - HAVE_ZLIB="no" - AC_MSG_CHECKING([for GNU zlib]) - AC_MSG_RESULT([suppressed]) - ;; - *) - HAVE_ZLIB="yes" - case "$withval" in - *,*) - zlib_inc="`echo $withval |cut -f1 -d,`" - zlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - zlib_inc="$withval/include" - zlib_lib="$withval/lib" - fi - ;; - esac - - dnl Trying to include -I/usr/include and -L/usr/lib is redundant and - dnl can mess some compilers up. - if test "X$zlib_inc" = "X/usr/include"; then - zlib_inc="" - fi - if test "X$zlib_lib" = "X/usr/lib"; then - zlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$zlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$zlib_inc" - fi - - AC_CHECK_HEADERS([zlib.h], - [HAVE_ZLIB_H="yes"], - [CPPFLAGS="$saved_CPPFLAGS"]) - - if test -n "$zlib_lib"; then - LDFLAGS="$LDFLAGS -L$zlib_lib" - fi - - AC_CHECK_LIB([z], [compress2],, - [LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB]) - AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find zlib library]) - fi - ;; -esac - -if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then - AC_DEFINE(HAVE_FILTER_DEFLATE, 1, - [Define if support for deflate filter is enabled]) -fi - -dnl ---------------------------------------------------------------------- -dnl Is the szlib present? It has a header file `szlib.h' and a library -dnl `-lsz' and their locations might be specified with the `--with-szlib' -dnl command-line switch. The value is an include path and/or a library path. -dnl If the library path is specified then it must be preceded by a comma. -dnl -AC_ARG_WITH([szlib], - [AC_HELP_STRING([--with-szlib=DIR], - [Use szlib library for external szlib I/O - filter [default=yes]])],, - withval=yes) - -case $withval in - yes) - HAVE_SZLIB="yes" - AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"]) - AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB]) - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find szlib library]) - fi - ;; - no) - HAVE_SZLIB="no" - AC_MSG_CHECKING([for szlib]) - AC_MSG_RESULT([suppressed]) - ;; - *) - HAVE_SZLIB="yes" - case "$withval" in - *,*) - szlib_inc="`echo $withval |cut -f1 -d,`" - szlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - szlib_inc="$withval/include" - szlib_lib="$withval/lib" - fi - ;; - esac - - dnl Trying to include -I/usr/include and -L/usr/lib is redundant and - dnl can mess some compilers up. - if test "X$szlib_inc" = "X/usr/include"; then - szlib_inc="" - fi - if test "X$szlib_lib" = "X/usr/lib"; then - szlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$szlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$szlib_inc" - fi - - AC_CHECK_HEADERS([szlib.h], - [HAVE_SZLIB_H="yes"], - [CPPFLAGS="$saved_CPPFLAGS"]) - - if test -n "$szlib_lib"; then - LDFLAGS="$LDFLAGS -L$szlib_lib" - fi - - AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, - [LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB]) - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find szlib library]) - fi - ;; -esac - -if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then - AC_DEFINE(HAVE_FILTER_SZIP, 1, - [Define if support for szip filter is enabled]) -fi - -dnl ---------------------------------------------------------------------- -dnl Should the Stream Virtual File Driver be compiled in ? -dnl -AC_MSG_CHECKING([for Stream Virtual File Driver support]) -AC_ARG_ENABLE([stream-vfd], - [AC_HELP_STRING([--enable-stream-vfd], - [Build the Stream Virtual File Driver - [default=no]])], - [STREAM_VFD=$enableval]) - -if test "$STREAM_VFD" = "yes"; then - AC_MSG_RESULT([yes]) - AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h]) - AC_DEFINE([HAVE_STREAM], [1], - [Define if the stream virtual file driver should be compiled]) - - dnl Check if 'socklen_t' available - AC_MSG_CHECKING([if socklen_t is defined]) - AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif - ], - [socklen_t foo; return 0;], - AC_DEFINE([HAVE_SOCKLEN_T], 1, - [Define if \`socklen_t' is defined]) - AC_MSG_RESULT([yes]), - AC_MSG_RESULT([no]) - ) -else - AC_MSG_RESULT([not configured]) -fi - -dnl ---------------------------------------------------------------------- -dnl Checks for header files. -dnl - -dnl Checkpoint the cache -AC_CACHE_SAVE - -AC_MSG_CHECKING(make) -AC_SUBST_FILE(DEPEND) -if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ - sed -n 1p|cut -c1-8`" = "GNU Make"; then - AC_MSG_RESULT(GNU make) - GMAKE=yes - if test "X$GCC" = "Xyes"; then - DEPEND=config/depend1 - else - DEPEND=config/depend2 - fi -else - AC_MSG_RESULT(generic) -fi - -dnl How do we include another file into a Makefile? -if test -z "$DEPEND"; then - AC_MSG_CHECKING(how to include a makefile) - - dnl The include file contains the target for `foo' - cat >makeinc <' >maketest - if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - AC_MSG_RESULT([.include ]) - DEPEND=config/depend3 - break - fi - - dnl Most make's use `include FILE' - echo 'include makeinc' >maketest - if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - AC_MSG_RESULT(include FILE) - DEPEND=config/depend4 - break; - fi - - dnl default - AC_MSG_RESULT(you have a deficient make command) - DEPEND=config/dependN - break - done - rm makeinc maketest -fi - -dnl Some cleanup stuff -rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files - -dnl ---------------------------------------------------------------------- -dnl Determine the runtime libraries we may need to include in the -dnl libtools command so that executables will find the correct dynamic -dnl libraries. -dnl -DYNAMIC_DIRS="" -if test -n "$LDFLAGS"; then - for d in $LDFLAGS ; do - case "$d" in - -L*) - d=`echo $d | sed -e 's/-L//g'` - case "$d" in - .*) - dnl If the path isn't absolute, make it so by prepending the - dnl ROOT directory to it. - d=${ROOT}/$d - ;; - esac - DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS" - ;; - esac - done -fi -AC_SUBST(DYNAMIC_DIRS) - -dnl ---------------------------------------------------------------------- -dnl Build the Makefiles. Almost every Makefile.in will begin with the line -dnl `@COMMENCE@' and end with the line `@CONCLUDE@'. These lines insert -dnl various files from the config directory into the Makefile. -dnl -AC_SUBST_FILE(COMMENCE) COMMENCE=config/commence -AC_SUBST_FILE(CONCLUDE) CONCLUDE=config/conclude - -dnl The directory search list -if test -z "$SEARCH"; then - AC_SUBST(SEARCH) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' - cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' - SEARCH="$SEARCH_RULE`eval $cmd`" -fi - -dnl We don't need to say when we're entering directories if we're using -dnl GNU make becuase make does it for us. -if test "X$GMAKE" = "Xyes"; then - AC_SUBST(SETX) SETX=":" -else - AC_SUBST(SETX) SETX="set -x" -fi - -dnl Some cleanup stuff -rm -f conftest conftest.o conftest.c core core.* *.core dummy.o - -dnl Build config.status, touch the stamp files, and build all the Makefiles. -dnl The order is such that the first `make' does not need to update any -dnl configuration information. See config/commence.in for the order in which -dnl things need to be done. - -dnl Then the config.status file (but not makefiles) -saved_no_create=$no_create -no_create=yes -AC_CONFIG_FILES([config/depend1 - config/depend2 - config/depend3 - config/depend4 - config/dependN - config/commence - config/conclude - Makefile - src/Makefile - src/h5c++ - test/Makefile - examples/Makefile]) -AC_OUTPUT -no_create=$saved_no_create - -dnl Finally the makefiles -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - -chmod 755 src/h5c++ diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 7711432..ac73281 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -15,12 +15,14 @@ ## ## ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_CXX="yes" + ## Replace building CC with the just installed h5cc CXX=$(bindir)/h5c++ CPPFLAGS=-I. -I$(srcdir) diff --git a/c++/src/Dependencies b/c++/src/Dependencies index f29a269..a6a5daf 100644 --- a/c++/src/Dependencies +++ b/c++/src/Dependencies @@ -1,3 +1,1202 @@ ## This file is machine generated on GNU systems. ## Only temporary changes may be made here. +H5Exception.lo: \ + $(srcdir)/H5Exception.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5Exception.h +H5RefCounter.lo: \ + $(srcdir)/H5RefCounter.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h +H5IdComponent.lo: \ + $(srcdir)/H5IdComponent.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5Library.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h +H5Library.lo: \ + $(srcdir)/H5Library.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5Library.h +H5Attribute.lo: \ + $(srcdir)/H5Attribute.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5Attribute.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5DataSpace.h +H5Object.lo: \ + $(srcdir)/H5Object.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5Attribute.h +H5PropList.lo: \ + $(srcdir)/H5PropList.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h +H5FaccProp.lo: \ + $(srcdir)/H5FaccProp.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5FaccProp.h +H5FcreatProp.lo: \ + $(srcdir)/H5FcreatProp.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5FcreatProp.h +H5DcreatProp.lo: \ + $(srcdir)/H5DcreatProp.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5DcreatProp.h +H5DxferProp.lo: \ + $(srcdir)/H5DxferProp.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5DxferProp.h +H5DataType.lo: \ + $(srcdir)/H5DataType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5PredType.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h +H5DataSpace.lo: \ + $(srcdir)/H5DataSpace.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5DataSpace.h +H5AbstractDs.lo: \ + $(srcdir)/H5AbstractDs.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5Alltypes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5EnumType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5CompType.h +H5AtomType.lo: \ + $(srcdir)/H5AtomType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h +H5PredType.lo: \ + $(srcdir)/H5PredType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5Library.h \ + $(srcdir)/H5PredType.h +H5EnumType.lo: \ + $(srcdir)/H5EnumType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5EnumType.h +H5IntType.lo: \ + $(srcdir)/H5IntType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5PredType.h +H5FloatType.lo: \ + $(srcdir)/H5FloatType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5PredType.h +H5StrType.lo: \ + $(srcdir)/H5StrType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5PredType.h +H5CompType.lo: \ + $(srcdir)/H5CompType.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5Alltypes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5EnumType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5CompType.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5DataSet.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h +H5DataSet.lo: \ + $(srcdir)/H5DataSet.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5DcreatProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DataSet.h +H5CommonFG.lo: \ + $(srcdir)/H5CommonFG.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5FaccProp.h \ + $(srcdir)/H5FcreatProp.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DcreatProp.h \ + $(srcdir)/H5CommonFG.h \ + $(srcdir)/H5Group.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5File.h \ + $(srcdir)/H5Alltypes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5EnumType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5CompType.h +H5Group.lo: \ + $(srcdir)/H5Group.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5FaccProp.h \ + $(srcdir)/H5FcreatProp.h \ + $(srcdir)/H5DcreatProp.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5CommonFG.h \ + $(srcdir)/H5Group.h \ + $(srcdir)/H5File.h \ + $(srcdir)/H5Alltypes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5EnumType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5CompType.h +H5File.lo: \ + $(srcdir)/H5File.cpp \ + $(srcdir)/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(srcdir)/H5RefCounter.h \ + $(srcdir)/H5Exception.h \ + $(srcdir)/H5IdComponent.h \ + $(srcdir)/H5Idtemplates.h \ + $(srcdir)/H5PropList.h \ + $(srcdir)/H5Object.h \ + $(srcdir)/H5Classes.h \ + $(srcdir)/H5FaccProp.h \ + $(srcdir)/H5FcreatProp.h \ + $(srcdir)/H5DxferProp.h \ + $(srcdir)/H5DcreatProp.h \ + $(srcdir)/H5CommonFG.h \ + $(srcdir)/H5Group.h \ + $(srcdir)/H5AbstractDs.h \ + $(srcdir)/H5DataSpace.h \ + $(srcdir)/H5DataSet.h \ + $(srcdir)/H5File.h \ + $(srcdir)/H5Alltypes.h \ + $(srcdir)/H5DataType.h \ + $(srcdir)/H5AtomType.h \ + $(srcdir)/H5EnumType.h \ + $(srcdir)/H5IntType.h \ + $(srcdir)/H5FloatType.h \ + $(srcdir)/H5StrType.h \ + $(srcdir)/H5CompType.h diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index 92e7538..9e05924 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -16,11 +16,13 @@ ## ## ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_CXX="yes" + hdf5_srcdir=$(top_srcdir)/src hdf5_builddir=$(top_builddir)/src diff --git a/c++/src/h5c++.in b/c++/src/h5c++.in index 29a1082..9d44f12 100755 --- a/c++/src/h5c++.in +++ b/c++/src/h5c++.in @@ -54,7 +54,6 @@ get_output_file="no" SHOW="eval" CXXBASE="@CXX@" CXXLINKERBASE="@CXX@" -CFLAGS="@CFLAGS@" CXXFLAGS="@CXXFLAGS@" CPPFLAGS="@CPPFLAGS@" LDFLAGS="@LDFLAGS@" @@ -213,7 +212,7 @@ if test "x$do_compile" = "xyes"; then compile_args="-c $compile_args" fi - $SHOW $CXX -I$includedir $CPPFLAGS $CXXFLAGS $CFLAGS $compile_args + $SHOW $CXX -I$includedir $CPPFLAGS $CXXFLAGS $compile_args status=$? if test "$status" != "0"; then @@ -223,7 +222,7 @@ fi if test "x$do_link" = "xyes"; then link_args="$link_args ${libdir}/libhdf5_cpp.a ${libdir}/libhdf5.a $LIBS" - $SHOW $CXXLINKER -I$includedir $CPPFLAGS $CXXFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $link_args + $SHOW $CXXLINKER -I$includedir $CPPFLAGS $CXXFLAGS $LDFLAGS $clibpath $link_objs $link_args status=$? fi diff --git a/c++/test/Dependencies b/c++/test/Dependencies index f29a269..aaba9fe 100644 --- a/c++/test/Dependencies +++ b/c++/test/Dependencies @@ -1,3 +1,347 @@ ## This file is machine generated on GNU systems. ## Only temporary changes may be made here. +dsets.lo: \ + $(srcdir)/dsets.cpp \ + $(top_builddir)/../../hdf5/c++/src/H5Cpp.h \ + $(top_builddir)/../../hdf5/c++/src/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(top_builddir)/../../hdf5/c++/src/H5RefCounter.h \ + $(top_builddir)/../../hdf5/c++/src/H5Exception.h \ + $(top_builddir)/../../hdf5/c++/src/H5IdComponent.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSpace.h \ + $(top_builddir)/../../hdf5/c++/src/H5PropList.h \ + $(top_builddir)/../../hdf5/c++/src/H5Object.h \ + $(top_builddir)/../../hdf5/c++/src/H5Classes.h \ + $(top_builddir)/../../hdf5/c++/src/H5AbstractDs.h \ + $(top_builddir)/../../hdf5/c++/src/H5Attribute.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5DxferProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FaccProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5AtomType.h \ + $(top_builddir)/../../hdf5/c++/src/H5PredType.h \ + $(top_builddir)/../../hdf5/c++/src/H5EnumType.h \ + $(top_builddir)/../../hdf5/c++/src/H5IntType.h \ + $(top_builddir)/../../hdf5/c++/src/H5FloatType.h \ + $(top_builddir)/../../hdf5/c++/src/H5StrType.h \ + $(top_builddir)/../../hdf5/c++/src/H5CompType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSet.h \ + $(top_builddir)/../../hdf5/c++/src/H5CommonFG.h \ + $(top_builddir)/../../hdf5/c++/src/H5Group.h \ + $(top_builddir)/../../hdf5/c++/src/H5File.h \ + $(top_builddir)/../../hdf5/c++/src/H5Library.h \ + $(top_builddir)/../../hdf5/test/h5test.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Tpkg.h \ + $(top_builddir)/../../hdf5/src/H5Tprivate.h \ + $(top_builddir)/../../hdf5/src/H5Gprivate.h \ + $(top_builddir)/../../hdf5/src/H5Bprivate.h \ + $(top_builddir)/../../hdf5/src/H5ACprivate.h \ + $(top_builddir)/../../hdf5/src/H5Fprivate.h \ + $(top_builddir)/../../hdf5/src/H5RSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Rprivate.h \ + $(top_builddir)/../../hdf5/src/H5Dprivate.h \ + $(top_builddir)/../../hdf5/src/H5Oprivate.h \ + $(top_builddir)/../../hdf5/src/H5HGprivate.h \ + $(top_builddir)/../../hdf5/src/H5Zprivate.h \ + $(top_builddir)/../../hdf5/test/testhdf5.h \ + $(top_builddir)/../../hdf5/src/H5Eprivate.h \ + $(srcdir)/h5cpputil.h +testhdf5.lo: \ + $(srcdir)/testhdf5.cpp \ + $(top_builddir)/../../hdf5/test/testhdf5.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Eprivate.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/c++/src/H5Cpp.h \ + $(top_builddir)/../../hdf5/c++/src/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(top_builddir)/../../hdf5/c++/src/H5RefCounter.h \ + $(top_builddir)/../../hdf5/c++/src/H5Exception.h \ + $(top_builddir)/../../hdf5/c++/src/H5IdComponent.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSpace.h \ + $(top_builddir)/../../hdf5/c++/src/H5PropList.h \ + $(top_builddir)/../../hdf5/c++/src/H5Object.h \ + $(top_builddir)/../../hdf5/c++/src/H5Classes.h \ + $(top_builddir)/../../hdf5/c++/src/H5AbstractDs.h \ + $(top_builddir)/../../hdf5/c++/src/H5Attribute.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5DxferProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FaccProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5AtomType.h \ + $(top_builddir)/../../hdf5/c++/src/H5PredType.h \ + $(top_builddir)/../../hdf5/c++/src/H5EnumType.h \ + $(top_builddir)/../../hdf5/c++/src/H5IntType.h \ + $(top_builddir)/../../hdf5/c++/src/H5FloatType.h \ + $(top_builddir)/../../hdf5/c++/src/H5StrType.h \ + $(top_builddir)/../../hdf5/c++/src/H5CompType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSet.h \ + $(top_builddir)/../../hdf5/c++/src/H5CommonFG.h \ + $(top_builddir)/../../hdf5/c++/src/H5Group.h \ + $(top_builddir)/../../hdf5/c++/src/H5File.h \ + $(top_builddir)/../../hdf5/c++/src/H5Library.h \ + $(srcdir)/h5cpputil.h +tfile.lo: \ + $(srcdir)/tfile.cpp \ + $(top_builddir)/../../hdf5/c++/src/H5Cpp.h \ + $(top_builddir)/../../hdf5/c++/src/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(top_builddir)/../../hdf5/c++/src/H5RefCounter.h \ + $(top_builddir)/../../hdf5/c++/src/H5Exception.h \ + $(top_builddir)/../../hdf5/c++/src/H5IdComponent.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSpace.h \ + $(top_builddir)/../../hdf5/c++/src/H5PropList.h \ + $(top_builddir)/../../hdf5/c++/src/H5Object.h \ + $(top_builddir)/../../hdf5/c++/src/H5Classes.h \ + $(top_builddir)/../../hdf5/c++/src/H5AbstractDs.h \ + $(top_builddir)/../../hdf5/c++/src/H5Attribute.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5DxferProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FaccProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5AtomType.h \ + $(top_builddir)/../../hdf5/c++/src/H5PredType.h \ + $(top_builddir)/../../hdf5/c++/src/H5EnumType.h \ + $(top_builddir)/../../hdf5/c++/src/H5IntType.h \ + $(top_builddir)/../../hdf5/c++/src/H5FloatType.h \ + $(top_builddir)/../../hdf5/c++/src/H5StrType.h \ + $(top_builddir)/../../hdf5/c++/src/H5CompType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSet.h \ + $(top_builddir)/../../hdf5/c++/src/H5CommonFG.h \ + $(top_builddir)/../../hdf5/c++/src/H5Group.h \ + $(top_builddir)/../../hdf5/c++/src/H5File.h \ + $(top_builddir)/../../hdf5/c++/src/H5Library.h \ + $(top_builddir)/../../hdf5/test/testhdf5.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Eprivate.h +th5s.lo: \ + $(srcdir)/th5s.cpp \ + $(top_builddir)/../../hdf5/c++/src/H5Cpp.h \ + $(top_builddir)/../../hdf5/c++/src/H5Include.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(top_builddir)/../../hdf5/c++/src/H5RefCounter.h \ + $(top_builddir)/../../hdf5/c++/src/H5Exception.h \ + $(top_builddir)/../../hdf5/c++/src/H5IdComponent.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSpace.h \ + $(top_builddir)/../../hdf5/c++/src/H5PropList.h \ + $(top_builddir)/../../hdf5/c++/src/H5Object.h \ + $(top_builddir)/../../hdf5/c++/src/H5Classes.h \ + $(top_builddir)/../../hdf5/c++/src/H5AbstractDs.h \ + $(top_builddir)/../../hdf5/c++/src/H5Attribute.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5DxferProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FaccProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5FcreatProp.h \ + $(top_builddir)/../../hdf5/c++/src/H5AtomType.h \ + $(top_builddir)/../../hdf5/c++/src/H5PredType.h \ + $(top_builddir)/../../hdf5/c++/src/H5EnumType.h \ + $(top_builddir)/../../hdf5/c++/src/H5IntType.h \ + $(top_builddir)/../../hdf5/c++/src/H5FloatType.h \ + $(top_builddir)/../../hdf5/c++/src/H5StrType.h \ + $(top_builddir)/../../hdf5/c++/src/H5CompType.h \ + $(top_builddir)/../../hdf5/c++/src/H5DataSet.h \ + $(top_builddir)/../../hdf5/c++/src/H5CommonFG.h \ + $(top_builddir)/../../hdf5/c++/src/H5Group.h \ + $(top_builddir)/../../hdf5/c++/src/H5File.h \ + $(top_builddir)/../../hdf5/c++/src/H5Library.h \ + $(top_builddir)/../../hdf5/test/testhdf5.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Eprivate.h +h5cpputil.lo: \ + $(srcdir)/h5cpputil.cpp \ + $(srcdir)/h5cpputil.h \ + $(top_builddir)/../../hdf5/test/h5test.h \ + $(top_builddir)/../../hdf5/src/hdf5.h \ + $(top_builddir)/../../hdf5/src/H5public.h \ + $(top_builddir)/src/H5pubconf.h \ + $(top_builddir)/../../hdf5/src/H5api_adpt.h \ + $(top_builddir)/../../hdf5/src/H5Ipublic.h \ + $(top_builddir)/../../hdf5/src/H5Apublic.h \ + $(top_builddir)/../../hdf5/src/H5ACpublic.h \ + $(top_builddir)/../../hdf5/src/H5Bpublic.h \ + $(top_builddir)/../../hdf5/src/H5Dpublic.h \ + $(top_builddir)/../../hdf5/src/H5Epublic.h \ + $(top_builddir)/../../hdf5/src/H5Fpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDpublic.h \ + $(top_builddir)/../../hdf5/src/H5Gpublic.h \ + $(top_builddir)/../../hdf5/src/H5HGpublic.h \ + $(top_builddir)/../../hdf5/src/H5HLpublic.h \ + $(top_builddir)/../../hdf5/src/H5MMpublic.h \ + $(top_builddir)/../../hdf5/src/H5Opublic.h \ + $(top_builddir)/../../hdf5/src/H5Ppublic.h \ + $(top_builddir)/../../hdf5/src/H5Zpublic.h \ + $(top_builddir)/../../hdf5/src/H5Rpublic.h \ + $(top_builddir)/../../hdf5/src/H5Spublic.h \ + $(top_builddir)/../../hdf5/src/H5Tpublic.h \ + $(top_builddir)/../../hdf5/src/H5FDcore.h \ + $(top_builddir)/../../hdf5/src/H5FDfamily.h \ + $(top_builddir)/../../hdf5/src/H5FDfphdf5.h \ + $(top_builddir)/../../hdf5/src/H5FDmpio.h \ + $(top_builddir)/../../hdf5/src/H5FDgass.h \ + $(top_builddir)/../../hdf5/src/H5FDlog.h \ + $(top_builddir)/../../hdf5/src/H5FDmpiposix.h \ + $(top_builddir)/../../hdf5/src/H5FDmulti.h \ + $(top_builddir)/../../hdf5/src/H5FDsec2.h \ + $(top_builddir)/../../hdf5/src/H5FDsrb.h \ + $(top_builddir)/../../hdf5/src/H5FDstdio.h \ + $(top_builddir)/../../hdf5/src/H5FDstream.h \ + $(top_builddir)/../../hdf5/src/H5private.h \ + $(top_builddir)/../../hdf5/src/H5MPprivate.h \ + $(top_builddir)/../../hdf5/src/H5FSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Tpkg.h \ + $(top_builddir)/../../hdf5/src/H5Tprivate.h \ + $(top_builddir)/../../hdf5/src/H5Gprivate.h \ + $(top_builddir)/../../hdf5/src/H5Bprivate.h \ + $(top_builddir)/../../hdf5/src/H5ACprivate.h \ + $(top_builddir)/../../hdf5/src/H5Fprivate.h \ + $(top_builddir)/../../hdf5/src/H5RSprivate.h \ + $(top_builddir)/../../hdf5/src/H5Rprivate.h \ + $(top_builddir)/../../hdf5/src/H5Dprivate.h \ + $(top_builddir)/../../hdf5/src/H5Oprivate.h \ + $(top_builddir)/../../hdf5/src/H5HGprivate.h \ + $(top_builddir)/../../hdf5/src/H5Zprivate.h diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 8c4fcf0..fbe8ca3 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -15,11 +15,13 @@ ## ## ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_CXX="yes" + hdf5_srcdir=$(top_srcdir)/src hdf5_builddir=$(top_builddir)/src @@ -31,7 +33,7 @@ CPPFLAGS=-I. -I../src -I$(srcdir)/../src -I$(top_srcdir)/test -I$(hdf5_builddir) LIB=../src/libhdf5_cpp.la LIBHDF5=$(hdf5_builddir)/libhdf5.la -LT_LINK_LIB=$(LT) --mode=link $(CXX) -rpath $(libdir) +LT_LINK_CXX_LIB=$(LT) --mode=link $(CXX) -static -rpath $(libdir) ## These are our main targets. They should be listed in the order to be ## executed, generally most specific tests to least specific tests. @@ -52,9 +54,9 @@ DISTCLEAN=$(TEST_PROGS_SRC:.cpp=.lo) $(TEST_PROGS_SRC:.cpp=.o) $(TEST_PROGS): $(LIB) $(LIBHDF5) testhdf5: $(TEST_OBJ) - @$(LT_LINK_EXE) $(CFLAGS) -o $@ $(TESTHDF5_OBJ) $(LIB) $(LIBHDF5) $(LDFLAGS) $(LIBS) $(DEFAULT_LIBS) + @$(LT_LINK_CXX_EXE) -static $(CXXFLAGS) -o $@ $(TESTHDF5_OBJ) $(LIB) $(LIBHDF5) $(LDFLAGS) $(LIBS) $(DEFAULT_LIBS) dsets: dsets.lo h5cpputil.lo - @$(LT_LINK_EXE) $(CFLAGS) -o $@ dsets.lo h5cpputil.lo $(hdf5_builddir)/../test/h5test.lo $(LIB) $(LIBHDF5) $(LDFLAGS) $(LIBS) $(DEFAULT_LIBS) + @$(LT_LINK_CXX_EXE) -static $(CXXFLAGS) -o $@ dsets.lo h5cpputil.lo $(hdf5_builddir)/../test/h5test.lo $(LIB) $(LIBHDF5) $(LDFLAGS) $(LIBS) $(DEFAULT_LIBS) @CONCLUDE@ diff --git a/config/commence.in b/config/commence.in index af1275c..bb8392d 100644 --- a/config/commence.in +++ b/config/commence.in @@ -6,7 +6,7 @@ ## Things that Make needs .SUFFIXES: -.SUFFIXES: .c .o .lo +.SUFFIXES: .c .f90 .cpp .o .lo @SET_MAKE@ ## Directories to search @@ -15,7 +15,14 @@ ## Programs SHELL=/bin/sh CC=@CC@ +CXX=@CXX@ +F9X=@F9X@ +F9XMODEXT=@F9XMODEXT@ +F9XMODFLAG=@F9XMODFLAG@ +FSEARCH_DIRS=@FSEARCH_DIRS@ CFLAGS=@CFLAGS@ +CXXFLAGS=@CXXFLAGS@ +FFLAGS=@FFLAGS@ CPPFLAGS=@CPPFLAGS@ LDFLAGS=@LDFLAGS@ ROOT=@ROOT@ @@ -33,6 +40,10 @@ RUNPARALLEL=@RUNPARALLEL@ RUNTEST=$(RUNSERIAL) TRACE=: +## Languages +HDF_FORTRAN="no" +HDF_CXX="no" + ## Installation points prefix=@prefix@ exec_prefix=@exec_prefix@ @@ -54,6 +65,16 @@ LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM) LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA) LT_UNINSTALL=$(LT) --mode=uninstall $(RM) +# Fortran compilation/linking stuff +LT_FCOMPILE=$(LT) --mode=compile $(F9X) +LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static $(DYNAMIC_DIRS) +LT_LINK_FEXE=$(LT) --mode=link $(F9X) $(LT_STATIC_EXEC) $(DYNAMIC_DIRS) + +# C++ compilation/linking stuff +LT_CXX_COMPILE=$(LT) --mode=compile $(CXX) +LT_LINK_CXX_LIB=$(LT) --mode=link $(CXX) -static -rpath $(libdir) $(DYNAMIC_DIRS) +LT_LINK_CXX_EXE=$(LT) --mode=link $(CXX) -static $(LT_STATIC_EXEC) -dlopen self -rpath $(bindir) $(DYNAMIC_DIRS) + ## Optional variables. We must declare them here because Irix pmake ## complains if it sees a reference to a variable which has never been ## defined. The main makefile is free to redefine these to something else. diff --git a/config/conclude.in b/config/conclude.in index ad90169..8f14856 100644 --- a/config/conclude.in +++ b/config/conclude.in @@ -9,11 +9,17 @@ ## lib: $(LIB) $(LIB) __no_library__: $(LIB_OBJ) - @$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS) - @for d in X $(SUBDIRS); do \ - if test $$d != X; then \ - (set -x; cd $$d && $(MAKE) lib) || exit 1; \ - fi; \ + @if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + $(LT_LINK_FLIB) -o $@ $(FFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS); \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + $(LT_LINK_CXX_LIB) -o $@ $(CXXFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS); \ + else \ + $(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS); \ + fi + @for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (set -x; cd $$d && $(MAKE) lib) || exit 1; \ + fi; \ done progs: $(LIB) $(PROGS) @@ -108,31 +114,42 @@ check-vfd: ## Make installation directories directories if they don't exist. ## $(libdir): - $(top_srcdir)/bin/mkdirs $@ + -$(top_srcdir)/bin/mkdirs $@ $(includedir): - $(top_srcdir)/bin/mkdirs $@ + -$(top_srcdir)/bin/mkdirs $@ $(bindir): - $(top_srcdir)/bin/mkdirs $@ + -$(top_srcdir)/bin/mkdirs $@ $(DOCDIR): - $(top_srcdir)/bin/mkdirs $@ + -$(top_srcdir)/bin/mkdirs $@ $(EXAMPLEDIR): - $(top_srcdir)/bin/mkdirs $@ + -$(top_srcdir)/bin/mkdirs $@ ## Install the library, the public header files, and public programs. ## install: $(AUX_LIB) $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir) @for f in X $(PUB_LIB); do \ - if test $$f != X; then \ - ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1); \ - fi; \ + if test $$f != X; then \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + (cd .libs && rm -f $(PUB_LIB)i && ln -s ../$(PUB_LIB) $(PUB_LIB)i); \ + fi; \ + ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1); \ + fi; \ done + @if test "X$(HDF_FORTRAN)" = "Xyes" -a -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ + if test -f "hdf5.$(F9XMODEXT)" || test -f "HDF5.$(F9XMODEXT)"; then \ + ((cp *.$(F9XMODEXT) $(libdir)/. && chmod 644 $(libdir)/*.$(F9XMODEXT)) || exit 1); \ + fi; \ + fi @if test -f libhdf5.settings; then \ (set -x; $(INSTALL_DATA) libhdf5.settings $(libdir)/. || exit 1); \ fi + @if test "X$(HDF_FORTRAN)" = "Xyes" -a -f libhdf5_fortran.settings; then \ + (set -x; $(INSTALL_DATA) libhdf5_fortran.settings $(libdir)/. || exit 1); \ + fi @for f in X $(PUB_HDR); do \ if test $$f != X; then \ if test -f $$f; then \ @@ -213,30 +230,38 @@ install-doc: $(PUB_DOCS) $(DOCDIR) ## uninstall: @for f in libhdf5.settings $(LIB); do \ - $(LT_UNINSTALL) $(libdir)/$$f; \ + $(LT_UNINSTALL) $(libdir)/$$f; \ done @if test -n "$(PUB_HDR)"; then \ - set -x; cd $(includedir) && $(RM) $(PUB_HDR); \ + set -x; cd $(includedir) && $(RM) $(PUB_HDR); \ fi - @for f in X $(PUB_PROGS); do \ - if test $$f != X; then \ - $(LT_UNINSTALL) $(bindir)/$$f; \ - fi; \ + @for f in dummy $(PUB_PROGS); do \ + if test $$f != dummy; then \ + $(LT_UNINSTALL) $(bindir)/$$f; \ + fi; \ done + @if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + $(LT_UNINSTALL) $(libdir)/libhdf5_fortran.settings; \ + if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ + if test -f "$(libdir)/hdf5.$(F9XMODEXT)" -o -f "$(libdir)/HDF5.$(F9XMODEXT)"; then \ + set -x; $(RM) $(libdir)/*.$(F9XMODEXT); \ + fi; \ + fi; \ + fi ## Removes those things that `make install-doc' (would have) installed. ## uninstall-doc: @for d in X $(SUBDIRS); do \ - if test $$d != X; then \ - (set -x; cd $$d && $(MAKE) $@) || exit 1; \ - fi; \ + if test $$d != X; then \ + (set -x; cd $$d && $(MAKE) $@) || exit 1; \ + fi; \ done @if test -n "$(PUB_DOCS)"; then \ - set -x; cd $(DOCDIR) && $(RM) $(PUB_DOCS); \ + set -x; cd $(DOCDIR) && $(RM) $(PUB_DOCS); \ fi - @if test -n "$(PUB_SUBDOCS)"; then \ - set -x; cd $(DOCDIR) && $(RM) $(PUB_SUBDOCS); \ + @if test -n "$(PUB_SUBDOCS)"; then \ + set -x; cd $(DOCDIR) && $(RM) $(PUB_SUBDOCS); \ fi ## Removes temporary files without removing the final target files. That is, @@ -269,8 +294,11 @@ clean: mostlyclean fi; \ done @if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(TEST_PROGS_PARA)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \ - $(RM) $(LIB) $(TEST_PROGS) $(TEST_PROGS_PARA) $(PROGS) $(CLEAN); \ - fi; + $(RM) $(LIB) $(TEST_PROGS) $(TEST_PROGS_PARA) $(PROGS) $(CLEAN); \ + fi + @if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + $(RM) -f *.M *.a *.mod; \ + fi -$(RM) -r .libs ## Like `clean' except it also removes files that were created by running @@ -280,10 +308,10 @@ clean: mostlyclean ## distclean: clean -$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN) - @for d in X $(SUBDIRS); do \ - if test $$d != X; then \ - (set -x; cd $$d; $(MAKE) $@) || exit 1; \ - fi; \ + @for d in X $(SUBDIRS); do \ + if test $$d != X; then \ + (set -x; cd $$d; $(MAKE) $@) || exit 1; \ + fi; \ done @if test -f $(srcdir)/Makefile.in; then \ (set -x; $(RM) Makefile); \ @@ -308,6 +336,18 @@ maintainer-clean: distclean .c.lo: @$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $< +.f90.o: + $(F9X) $(FFLAGS) $(FSEARCH_DIRS) -c $< + +.f90.lo: + @$(LT_FCOMPILE) $(FFLAGS) $(FSEARCH_DIRS) -c $< + +.cpp.o: + $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c $< + +.cpp.lo: + @$(LT_CXX_COMPILE) $(CXXFLAGS) $(CPPFLAGS) -c $< + ##----------------------------------------------------------------------------- ## The following section of this makefile contains dependencies between the ## source files and the header files. diff --git a/config/dec-flags b/config/dec-flags index 7b2b182..33924ee 100644 --- a/config/dec-flags +++ b/config/dec-flags @@ -60,3 +60,38 @@ if test X = "X$cc_flags_set"; then cc_vendor= cc_version= fi + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the Digital UNIX architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-Olimit 2048 -std1" + DEBUG_FFLAGS="-Olimit 2048 -std1" + PROD_FFLAGS="-Olimit 2048 -std1" + PROFILE_FFLAGS="-Olimit 2048 -std1" + f9x_flags_set=yes +fi + +# The default C++ compiler + diff --git a/config/depend1.in b/config/depend1.in index eaa7488..c34720a 100644 --- a/config/depend1.in +++ b/config/depend1.in @@ -21,31 +21,39 @@ ## tilde to the file name. ## $(srcdir)/Dependencies: .depend - @if test "$(srcdir)" != "."; then \ - echo '## This file is machine generated on GNU systems.' >$@; \ - echo '## Only temporary changes may be made here.' >>$@; \ - echo >>$@; \ - $(PERL) -p $(top_srcdir)/bin/distdep .depend >>$@; \ - else \ - echo 'Dependencies cannot be built when $$srcdir == $$builddir'; \ - fi + @if test "$(srcdir)" != "."; then \ + echo '## This file is machine generated on GNU systems.' >$@; \ + echo '## Only temporary changes may be made here.' >>$@; \ + echo >>$@; \ + $(PERL) -p $(top_srcdir)/bin/distdep .depend >>$@; \ + else \ + echo 'Dependencies cannot be built when $$srcdir == $$builddir'; \ + fi .depend: $(LIB_SRC) $(TEST_SRC) $(PROG_SRC) @touch .depend - @for dep in $? dummy; do \ - if test $$dep != "dummy" -a -n "$(PERL)"; then \ - case "$$dep" in \ - *.c) \ - echo Building dependencies for $$dep; \ - obj=`basename $$dep .c`.lo; \ - sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@; \ - $(TRACE) $$dep; \ - $(CC) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@; \ - $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir) --top_builddir=$(top_builddir) $@; \ - ;; \ - esac; \ - fi; \ - done + @for dep in $? dummy; do \ + if test $$dep != "dummy" -a -n "$(PERL)"; then \ + case "$$dep" in \ + *.c) \ + echo Building dependencies for $$dep; \ + obj=`basename $$dep .c`.lo; \ + sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@; \ + $(TRACE) $$dep; \ + $(CC) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@; \ + $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir) --top_builddir=$(top_builddir) $@; \ + ;; \ + *.cpp) \ + echo Building dependencies for $$dep; \ + obj=`basename $$dep .cpp`.lo; \ + sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@; \ + $(TRACE) $$dep; \ + $(CXX) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@; \ + $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir)/.. --top_builddir=$(top_builddir) $@; \ + ;; \ + esac; \ + fi; \ + done -include .depend diff --git a/config/freebsd b/config/freebsd index f35aa5b..b7598cc 100644 --- a/config/freebsd +++ b/config/freebsd @@ -7,8 +7,8 @@ # The default compiler is `gcc' if test "X-" = "X-$CC"; then - CC=gcc - CC_BASENAME=gcc + CC=gcc + CC_BASENAME=gcc fi # Architecture-specific flags @@ -27,8 +27,8 @@ NOFP=${NOFP:=-fomit-frame-pointer} # Special setup to use pthread support if enable-threadsafe is on. # Works with static executable only. if test "X-" != "X-$enable_threadsafe"; then - CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE" - LDFLAGS="$LDFLAGS -pthread" - LIBS="$LIBS -lcipher" - enable_static_exec=yes + CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE" + LDFLAGS="$LDFLAGS -pthread" + LIBS="$LIBS -lcipher" + enable_static_exec=yes fi diff --git a/config/gnu-flags b/config/gnu-flags index 7833aaf..afb451a 100644 --- a/config/gnu-flags +++ b/config/gnu-flags @@ -12,129 +12,129 @@ # cc_version: Version number: 2.91.60, 2.7.2.1 # if test X = "X$cc_flags_set"; then - cc_version="`$CC $CFLAGS -v 2>&1 |grep 'gcc version' |\ - sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" - cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'` - cc_version=`echo $cc_version |sed 's/[-a-z]//g'` - if test X = "X$cc_vendor" -a X != "X$cc_version"; then - cc_vendor=gcc - fi - if test "-" != "$cc_vendor-$cc_version"; then - echo "compiler '$CC' is GNU $cc_vendor-$cc_version" - fi - - # Some version numbers - cc_vers_major=`echo $cc_version | cut -f1 -d.` - cc_vers_minor=`echo $cc_version | cut -f2 -d.` - cc_vers_patch=`echo $cc_version | cut -f3 -d.` - test -n "$cc_vers_major" || cc_vers_major=0 - test -n "$cc_vers_minor" || cc_vers_minor=0 - test -n "$cc_vers_patch" || cc_vers_patch=0 - cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch` + cc_version="`$CC $CFLAGS -v 2>&1 |grep 'gcc version' |\ + sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" + cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'` + cc_version=`echo $cc_version |sed 's/[-a-z]//g'` + if test X = "X$cc_vendor" -a X != "X$cc_version"; then + cc_vendor=gcc + fi + if test "-" != "$cc_vendor-$cc_version"; then + echo "compiler '$CC' is GNU $cc_vendor-$cc_version" + fi + + # Some version numbers + cc_vers_major=`echo $cc_version | cut -f1 -d.` + cc_vers_minor=`echo $cc_version | cut -f2 -d.` + cc_vers_patch=`echo $cc_version | cut -f3 -d.` + test -n "$cc_vers_major" || cc_vers_major=0 + test -n "$cc_vers_minor" || cc_vers_minor=0 + test -n "$cc_vers_patch" || cc_vers_patch=0 + cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch` fi # GCC compilers before gcc-2.8.1 have problems with `long long'. if test gcc = "$cc_vendor" -a "$cc_vers_all" -lt 2008001; then - cat <&1 | grep -s "MIPSpro Compilers") 2>&1 > /dev/null - then - # use these flags if this is the SGI cc compiler or some compiler - # command that eventually uses the SGI cc compiler. - - # Check for old versions of the compiler that don't work right. - case "`$CC -version 2>&1 |head -1`" in - "Mongoose Compilers: Version 7.00") - echo " +---------------------------------------------------+" - echo " | You have an old version of cc (Mongoose Compilers |" - echo " | version 7.00). Please upgrade to MIPSpro version |" - echo " | 7.2.1.2m (patches are available from the SGI web |" - echo " | site). The 7.00 version may generate incorrect |" - echo " | code, especially when optimizations are enabled. |" - echo " +---------------------------------------------------+" - sleep 5 - ;; - esac - - # Always turn off these compiler warnings for the -64 compiler: - # 1174: function declared but not used - # 1196: __vfork() (this is an SGI config problem) - # 1209: constant expressions - # 1429: the `long long' type is not standard - # 1685: turn off warnings about turning off invalid warnings - # 3201: remark - parameter not referenced -# CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201" - CFLAGS="$CFLAGS -woff 1209,3201" - - # Always turn off these compiler warnings for the old compiler: - # 799: the `long long' type is not standard - # 803: turn off warnings about turning off invalid warnings - # 835: __vfork() (this is an SGI config problem) -# CFLAGS="$CFLAGS -woff 799,803,835" - - # Always turn off these loader warnings: - # (notice the peculiar syntax) - # 47: branch instructions that degrade performance on R4000 - # 84: a library is not used - # 85: duplicate definition preemption (from -lnsl) - # 134: duplicate weak definition preemption (from -lnsl) - CFLAGS="$CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134" - - # Always turn on full warnings - CFLAGS="$CFLAGS -fullwarn" - fi - - # Extra debugging flags - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - - # Extra production flags - PROD_CFLAGS="-O -s" - PROD_CPPFLAGS= - - # Extra profiling flags - PROFILE_CFLAGS=-pg - PROFILE_CPPFLAGS= - ;; + X-gcc) + . $srcdir/config/gnu-flags + ;; + + *) + if [ "$CC_BASENAME" = "cc" ] || ($CC -version 2>&1 | grep -s "MIPSpro Compilers") 2>&1 > /dev/null; then + # use these flags if this is the SGI cc compiler or some compiler + # command that eventually uses the SGI cc compiler. + + # Check for old versions of the compiler that don't work right. + case "`$CC -version 2>&1 |head -1`" in + "Mongoose Compilers: Version 7.00") + echo " +---------------------------------------------------+" + echo " | You have an old version of cc (Mongoose Compilers |" + echo " | version 7.00). Please upgrade to MIPSpro version |" + echo " | 7.2.1.2m (patches are available from the SGI web |" + echo " | site). The 7.00 version may generate incorrect |" + echo " | code, especially when optimizations are enabled. |" + echo " +---------------------------------------------------+" + sleep 5 + ;; + esac + + # Always turn off these compiler warnings for the -64 compiler: + # 1174: function declared but not used + # 1196: __vfork() (this is an SGI config problem) + # 1209: constant expressions + # 1429: the `long long' type is not standard + # 1685: turn off warnings about turning off invalid warnings + # 3201: remark - parameter not referenced + #CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201" + CFLAGS="$CFLAGS -woff 1209,3201" + + # Always turn off these compiler warnings for the old compiler: + # 799: the `long long' type is not standard + # 803: turn off warnings about turning off invalid warnings + # 835: __vfork() (this is an SGI config problem) + #CFLAGS="$CFLAGS -woff 799,803,835" + + # Always turn off these loader warnings: + # (notice the peculiar syntax) + # 47: branch instructions that degrade performance on R4000 + # 84: a library is not used + # 85: duplicate definition preemption (from -lnsl) + # 134: duplicate weak definition preemption (from -lnsl) + CFLAGS="$CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134" + + # Always turn on full warnings + CFLAGS="$CFLAGS -fullwarn" + fi + + # Extra debugging flags + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + + # Extra production flags + PROD_CFLAGS="-O -s" + PROD_CPPFLAGS= + + # Extra profiling flags + PROFILE_CFLAGS=-pg + PROFILE_CPPFLAGS= + ;; esac + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the IRIX architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X="f90" +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-64 -mips4 -O -s" + DEBUG_FFLAGS="-64 -mips4 -O -s" + PROD_FFLAGS="-64 -mips4 -O -s" + PROFILE_FFLAGS="-64 -mips4 -O -s" + f9x_flags_set=yes +fi + +# The default C++ compiler + +# The default compiler is `MIPSpro CC' +if test -z "$CXX"; then + CXX=CC + CXX_BASENAME=CC +fi + +# Try native compiler flags +if test -z "$cxx_flags_set"; then + # -LANG:std required for std use; -ptused causes templates used to be + # instantiated + CPPFLAGS="-LANG:std -ptused" + + # libCio is a default library, since libtool before 1.5 doesn't fully + # support C++ yet, default libraries must be explicitly specified. + # A new macro is used for this temporary and specific task so it + # won't polute the existing configuration + DEFAULT_LIBS="-lCio" + + DEBUG_CXXFLAGS=-g + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O -s" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS=-xpg + PROFILE_CPPFLAGS= + cxx_flags_set=yes +fi diff --git a/config/linux-gnulibc1 b/config/linux-gnulibc1 index 3659eb3..d57866f 100644 --- a/config/linux-gnulibc1 +++ b/config/linux-gnulibc1 @@ -17,3 +17,43 @@ NOFP=${NOFP:=-fomit-frame-pointer} # Figure out compiler flags . $srcdir/config/gnu-flags + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the Linux architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_INTEGER)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test -z "$F9X"; then + F9X=pgf90 +fi + +if test -z "$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="" + DEBUG_FFLAGS="" + PROD_FFLAGS="" + PROFILE_FFLAGS="" + f9x_flags_set=yes +fi + +# The default C++ compiler + +# The default compiler is `g++'. +if test -z "$CXX"; then + CXX=g++ + CXX_BASENAME=g++ +fi diff --git a/config/powerpc-ibm-aix4.x b/config/powerpc-ibm-aix4.x index 8b8ae02..482f7c3 100644 --- a/config/powerpc-ibm-aix4.x +++ b/config/powerpc-ibm-aix4.x @@ -82,3 +82,40 @@ ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8} # Don't cache size_t and off_t because they depend on if -D_LARGE_FILES is used #ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4} #ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the AIX architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_INTEGER)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=xlf +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="-qsuffix=f=f90" + FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" + FSEARCH_DIRS="-I./ -I../src" + DEBUG_FFLAGS="-O" + PROD_FFLAGS="-O" + PROFILE_FFLAGS="-O" + f9x_flags_set=yes +fi + +# The default C++ compiler + +# Use AIX supplied C++ compiler by default. +CXX=${CXX=xlC} diff --git a/config/powerpc-ibm-aix5.x b/config/powerpc-ibm-aix5.x index 41e2c6a..a58bccd 100644 --- a/config/powerpc-ibm-aix5.x +++ b/config/powerpc-ibm-aix5.x @@ -18,7 +18,7 @@ fi # Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used. if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then - RUNPARALLEL=${RUNPARALLEL="MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"} + RUNPARALLEL=${RUNPARALLEL="MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"} fi @@ -28,33 +28,33 @@ fi # `--enable-debug' switch of configure. case $CC_BASENAME in - xlc|mpcc_r) - # Turn off shared lib option. It causes some test suite to fail. - enable_shared="${enable_shared:-no}" - # CFLAGS must be set else configure set it to -g - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - # -O causes test/dtypes to fail badly. Turn it off for now. - PROD_CFLAGS="" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - gcc) - . $srcdir/config/gnu-flags - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + xlc|mpcc_r) + # Turn off shared lib option. It causes some test suite to fail. + enable_shared="${enable_shared:-no}" + # CFLAGS must be set else configure set it to -g + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + # -O causes test/dtypes to fail badly. Turn it off for now. + PROD_CFLAGS="" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + gcc) + . $srcdir/config/gnu-flags + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac #---------------------------------------------------------------------------- @@ -109,3 +109,44 @@ ac_cv_sizeof_uint_fast64_t=${ac_cv_sizeof_uint_fast64_t=8} # Don't cache size_t and off_t because they depend on if -D_LARGE_FILES is used #ac_cv_sizeof_size_t=${ac_cv_sizeof_size_t=4} #ac_cv_sizeof_off_t=${ac_cv_sizeof_off_t=8} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the AIX architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_INTEGER)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + if test "X-$enable_parallel" = "X-yes"; then + F9X=mpxlf_r + else + F9X=xlf + fi +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="-qsuffix=f=f90" + FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" + FSEARCH_DIRS="-I./ -I../src" + DEBUG_FFLAGS="-O" + PROD_FFLAGS="-O" + PROFILE_FFLAGS="-O" + f9x_flags_set=yes +fi + +# The default C++ compiler + +# Use AIX supplied C++ compiler by default. +CXX=${CXX=xlC} diff --git a/config/rs6000-ibm-aix4.x b/config/rs6000-ibm-aix4.x index 770ba80..c7a2223 100644 --- a/config/rs6000-ibm-aix4.x +++ b/config/rs6000-ibm-aix4.x @@ -9,3 +9,35 @@ # Cross compiling defaults ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the AIX architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_INTEGER)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=xlf +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="-qsuffix=f=f90" + FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" + FSEARCH_DIRS="-I./ -I../src" + DEBUG_FFLAGS="-O" + PROD_FFLAGS="-O" + PROFILE_FFLAGS="-O" + f9x_flags_set=yes +fi diff --git a/config/solaris2.x b/config/solaris2.x index d6434f5..31b12ee 100644 --- a/config/solaris2.x +++ b/config/solaris2.x @@ -8,8 +8,8 @@ # The default compiler is `sunpro cc' if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # Try gcc compiler flags @@ -17,19 +17,90 @@ fi # Try solaris native compiler flags if test "X-" = "X-$cc_flags_set"; then - CFLAGS="-erroff=%none -DBSD_COMP" - DEBUG_CFLAGS="-g -xildoff" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CFLAGS=-xpg - PROFILE_CPPFLAGS= - cc_flags_set=yes - # Turn off optimization flag for SUNpro compiler versions 4.x which - # have an optimization bug. Version 5.0 works. - ($CC -V 2>&1) | grep -s 'cc: .* C 4\.' >/dev/null 2>&1 \ - && PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`" + CFLAGS="-erroff=%none -DBSD_COMP" + DEBUG_CFLAGS="-g -xildoff" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O -s" + PROD_CPPFLAGS= + PROFILE_CFLAGS=-xpg + PROFILE_CPPFLAGS= + cc_flags_set=yes + + # Turn off optimization flag for SUNpro compiler versions 4.x which + # have an optimization bug. Version 5.0 works. + ($CC -V 2>&1) | grep -s 'cc: .* C 4\.' >/dev/null 2>&1 \ + && PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`" fi # Add socket lib for the Stream Virtual File Driver LIBS="$LIBS -lsocket" + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the Sparc Solaris architechture) +# +R_LARGE=18 +R_INTEGER=9 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_INTEGER)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="" + DEBUG_FFLAGS="" + PROD_FFLAGS="" + PROFILE_FFLAGS="" + f9x_flags_set=yes +fi + +# The default C++ compiler + +# The default compiler is `sunpro cc' +if test -z "$CXX"; then + CXX=CC + CXX_BASENAME=CC +fi + +# Try gcc compiler flags +#. $srcdir/config/gnu-flags + +cxx_version="`$CXX -V 2>&1 |grep 'WorkShop' |\ + sed 's/.*WorkShop.*C\+\+ \([0-9\.]*\).*/\1/'`" + +cxx_vers_major=`echo $cxx_version | cut -f1 -d.` +cxx_vers_minor=`echo $cxx_version | cut -f2 -d.` +cxx_vers_patch=`echo $cxx_version | cut -f3 -d.` + +# Specify the "-features=tmplife" if the compiler can handle this... +if test -n "$cxx_version"; then + if test $cxx_vers_major -ge 5 -a $cxx_vers_minor -ge 3 -o $cxx_vers_major -gt 5; then + CXXFLAGS="-features=tmplife" + fi +fi + +# Try solaris native compiler flags +if test -z "$cxx_flags_set"; then + CXXFLAGS="$CXXFLAGS -instances=global" + CPPFLAGS="-LANG:std" + DEBUG_CXXFLAGS=-g + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O -s" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS=-xpg + PROFILE_CPPFLAGS= + cxx_flags_set=yes +fi diff --git a/config/sv1-cray b/config/sv1-cray index e7b7724..b026b60 100644 --- a/config/sv1-cray +++ b/config/sv1-cray @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,37 +88,36 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O2 -h scalar0 -h vector0 -h task1" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac # Overriding Configure Tests @@ -136,3 +135,65 @@ esac # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp" + DEBUG_FFLAGS="-dp" + PROD_FFLAGS="-dp" + PROFILE_FFLAGS="-dp" + f9x_flags_set=yes +fi + +# The default C++ compiler + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac diff --git a/config/unicos b/config/unicos index 43c1bd9..d30e4f5 100644 --- a/config/unicos +++ b/config/unicos @@ -28,13 +28,12 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: - # C Compiler and Preprocessor Flags # --------------------------------- # @@ -88,38 +87,36 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero -h scalar0" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + PROD_CFLAGS="-O2 -h scalar0" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac # Overriding Configure Tests # -------------------------- @@ -136,3 +133,35 @@ ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp" + DEBUG_FFLAGS="-dp" + PROD_FFLAGS="-dp" + PROFILE_FFLAGS="-dp" + f9x_flags_set=yes +fi diff --git a/config/unicos10.0.X b/config/unicos10.0.X index 43c1bd9..a33c91b 100644 --- a/config/unicos10.0.X +++ b/config/unicos10.0.X @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,35 +88,35 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero -h scalar0" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac @@ -136,3 +136,64 @@ ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp" + DEBUG_FFLAGS="-dp" + PROD_FFLAGS="-dp" + PROFILE_FFLAGS="-dp" + f9x_flags_set=yes +fi + +# The default C++ compiler + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac diff --git a/config/unicosmk b/config/unicosmk index 66f7c4c..739abe1 100644 --- a/config/unicosmk +++ b/config/unicosmk @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,35 +88,35 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O2 -h scalar0" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac @@ -136,3 +136,35 @@ esac # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp" + DEBUG_FFLAGS="-dp" + PROD_FFLAGS="-dp" + PROFILE_FFLAGS="-dp" + f9x_flags_set=yes +fi diff --git a/config/unicosmk2.0.5.X b/config/unicosmk2.0.5.X index 66f7c4c..ef6da59 100644 --- a/config/unicosmk2.0.5.X +++ b/config/unicosmk2.0.5.X @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,35 +88,35 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O2 -h scalar0" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac @@ -136,3 +136,37 @@ esac # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + # -Wl passes flags to the linker and -M# will ignore warnings with + # number #. Warning 405 was stopping the executable from being built. + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp -Wl-M405" + DEBUG_FFLAGS="" + PROD_FFLAGS="" + PROFILE_FFLAGS="" + f9x_flags_set=yes +fi diff --git a/config/unicosmk2.0.6.X b/config/unicosmk2.0.6.X index 66f7c4c..4514b5c 100644 --- a/config/unicosmk2.0.6.X +++ b/config/unicosmk2.0.6.X @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,35 +88,35 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O2 -h scalar0" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac @@ -136,3 +136,66 @@ esac # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + # -Wl passes flags to the linker and -M# will ignore warnings with + # number #. Warning 405 and 412 were stopping the executable from being built. + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp -Wl-M405,412" + DEBUG_FFLAGS="" + PROD_FFLAGS="" + PROFILE_FFLAGS="" + f9x_flags_set=yes +fi + +# The default C++ compiler + +if test -z "$CXX"; then + CXX="CC" + CXX_BASENAME=CC +fi + +case $CXX_BASENAME in + g++) + CXXFLAGS="$CXXFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CXXFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O3 -fomit-frame-pointer" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CXXFLAGS="$CXXFLAGS -h instantiate=used" + DEBUG_CXXFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CXXFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CXXFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; +esac diff --git a/config/unicosmk2.0.X b/config/unicosmk2.0.X index 66f7c4c..406d4a4 100644 --- a/config/unicosmk2.0.X +++ b/config/unicosmk2.0.X @@ -28,8 +28,8 @@ # used within this file. if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc + CC=cc + CC_BASENAME=cc fi # no need to use RANLIB RANLIB=: @@ -88,35 +88,35 @@ RANLIB=: # above). case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= + gcc) + CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions + DEBUG_CFLAGS="-g -fverbose-asm" + DEBUG_CPPFLAGS= PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + cc) + CFLAGS="$CFLAGS" + DEBUG_CFLAGS="-g -h zero" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O2 -h scalar0" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; + + *) + CFLAGS="$CFLAGS -ansi" + DEBUG_CFLAGS="-g" + DEBUG_CPPFLAGS= + PROD_CFLAGS="-O" + PROD_CPPFLAGS= + PROFILE_CFLAGS="-pg" + PROFILE_CPPFLAGS= + ;; esac @@ -136,3 +136,37 @@ esac # long'. For instance, if the format would be `%lld' then set it to # `ll' or if the format would be `%qd' set it to `q'. #hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} + +# The default Fortran 90 compiler + +# +# HDF5 integers +# +# R_LARGE is the number of digits for the bigest integer supported. +# R_INTEGER is the number of digits in INTEGER +# +# (for the UNICOS architechture) +# +R_LARGE=18 +R_INTEGER=18 +HSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' +HID_T='SELECTED_INT_KIND(R_INTEGER)' +SIZE_T='SELECTED_INT_KIND(R_LARGE)' +OBJECT_NAMELEN_DEFAULT_F=-1 + +if test "X-" = "X-$F9X"; then + F9X=f90 +fi + +if test "X-" = "X-$f9x_flags_set"; then + # -Wl passes flags to the linker and -M# will ignore warnings with + # number #. Warning 405 was stopping the executable from being built. + F9XSUFFIXFLAG="" + FSEARCH_DIRS="" + FFLAGS="-dp -Wl-M405" + DEBUG_FFLAGS="" + PROD_FFLAGS="" + PROFILE_FFLAGS="" + f9x_flags_set=yes +fi diff --git a/configure b/configure index a32e30a..7cfbccd 100755 --- a/configure +++ b/configure @@ -422,7 +422,6 @@ PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/H5.c" ac_default_prefix=`pwd`/hdf5 -ac_subdirs_all="$ac_subdirs_all ${config_dirs}" # Factoring default headers for most tests. ac_includes_default="\ #include @@ -916,6 +915,18 @@ ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP +ac_env_CXX_set=${CXX+set} +ac_env_CXX_value=$CXX +ac_cv_env_CXX_set=${CXX+set} +ac_cv_env_CXX_value=$CXX +ac_env_CXXFLAGS_set=${CXXFLAGS+set} +ac_env_CXXFLAGS_value=$CXXFLAGS +ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} +ac_cv_env_CXXFLAGS_value=$CXXFLAGS +ac_env_CXXCPP_set=${CXXCPP+set} +ac_env_CXXCPP_value=$CXXCPP +ac_cv_env_CXXCPP_set=${CXXCPP+set} +ac_cv_env_CXXCPP_value=$CXXCPP # # Report the --help message. @@ -997,14 +1008,14 @@ Optional Features: (including versions of GCC before 2.8.0). Disabling the feature causes dataset sizes to be restricted to the size of core memory, or 'size_t'. - --enable-fortran Compile the Fortran interface [default=no] - --enable-cxx Compile the C++ interface [default=no] - --enable-static-exec Build only statically linked executables - [default=no] --enable-shared=PKGS build shared libraries default=yes --enable-static=PKGS build static libraries default=yes --enable-fast-install=PKGS optimize for fast installation default=yes --disable-libtool-lock avoid locking (might break parallel builds) + --enable-fortran Compile the Fortran interface [default=no] + --enable-cxx Compile the C++ interface [default=no] + --enable-static-exec Build only statically linked executables + [default=no] --enable-production Determines how to run the compiler. --enable-linux-lfs Enable support for large (64-bit) files on Linux. [default=check] @@ -1061,6 +1072,9 @@ Some influential environment variables: CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CXXCPP C++ preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -2400,160 +2414,6 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu CC_BASENAME="`echo $CC | cut -f1 -d' ' | xargs basename 2>/dev/null`" - - config_dirs="" - -echo "$as_me:$LINENO: checking if fortran interface enabled" >&5 -echo $ECHO_N "checking if fortran interface enabled... $ECHO_C" >&6 -# Check whether --enable-fortran or --disable-fortran was given. -if test "${enable_fortran+set}" = set; then - enableval="$enable_fortran" - HDF_FORTRAN=$enableval -fi; - -if test "X$HDF_FORTRAN" = "Xyes"; then - echo "yes" - if test -z "$config_dirs"; then - config_dirs="fortran" - else - config_dirs="${config_dirs} fortran" - fi -else - echo "no" -fi - -echo "$as_me:$LINENO: checking if c++ interface enabled" >&5 -echo $ECHO_N "checking if c++ interface enabled... $ECHO_C" >&6 -# Check whether --enable-cxx or --disable-cxx was given. -if test "${enable_cxx+set}" = set; then - enableval="$enable_cxx" - HDF_CXX=$enableval -fi; - -if test "X$HDF_CXX" = "Xyes"; then - echo "yes" - if test -z "$config_dirs"; then - config_dirs="c++" - else - config_dirs="${config_dirs} c++" - fi -else - echo "no" -fi - - - -subdirs="$subdirs ${config_dirs}" - - -echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5 -echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6 -# Check whether --enable-static_exec or --disable-static_exec was given. -if test "${enable_static_exec+set}" = set; then - enableval="$enable_static_exec" - STATIC_EXEC=$enableval -fi; - -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - LT_STATIC_EXEC="-all-static" -else - echo "no" - LT_STATIC_EXEC="" -fi - - - PERL="" -if test "X$GCC" = "Xyes"; then - for ac_prog in perl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_PERL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$PERL"; then - ac_cv_prog_PERL="$PERL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_PERL="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -PERL=$ac_cv_prog_PERL -if test -n "$PERL"; then - echo "$as_me:$LINENO: result: $PERL" >&5 -echo "${ECHO_T}$PERL" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$PERL" && break -done - -fi - -if test -z "$AR"; then - for ac_prog in ar xar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AR" && break -done -test -n "$AR" || AR=":" - -fi - - -export AR - echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` @@ -4116,7 +3976,7 @@ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 4119 "configure"' > conftest.$ac_ext + echo '#line 3979 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -4657,7 +4517,7 @@ chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no -if { (eval echo configure:4660: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +if { (eval echo configure:4520: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then @@ -6464,7 +6324,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Prevent multiple expansion + + + + HDF5_INTERFACES="" +echo "$as_me:$LINENO: checking if Fortran interface enabled" >&5 +echo $ECHO_N "checking if Fortran interface enabled... $ECHO_C" >&6 +# Check whether --enable-fortran or --disable-fortran was given. +if test "${enable_fortran+set}" = set; then + enableval="$enable_fortran" + HDF_FORTRAN=$enableval +fi; + +if test "X$HDF_FORTRAN" = "Xyes"; then + echo "yes" + + HDF5_INTERFACES="$HDF5_INTERFACES fortran" + + + + + + + + + + + + + + for ac_prog in f90 pgf90 xlf90 f95 g95 xlf95 +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_F9X+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$F9X"; then + ac_cv_prog_F9X="$F9X" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_F9X="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +F9X=$ac_cv_prog_F9X +if test -n "$F9X"; then + echo "$as_me:$LINENO: result: $F9X" >&5 +echo "${ECHO_T}$F9X" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$F9X" && break +done + +test -z "$F9X" && { { echo "$as_me:$LINENO: error: no acceptable f9X compiler found in \$PATH" >&5 +echo "$as_me: error: no acceptable f9X compiler found in \$PATH" >&2;} + { (exit 1); exit 1; }; } + + +echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works" >&5 +echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works... $ECHO_C" >&6 + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +cat > conftest.$ac_ext << EOF + + program conftest + end + +EOF +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + ac_cv_prog_f9x_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_f9x_cross=no + else + ac_cv_prog_f9x_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_f9x_works=no +fi +rm -fr conftest* + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_works" >&5 +echo "${ECHO_T}$ac_cv_prog_f9x_works" >&6 +if test $ac_cv_prog_f9x_works = no; then + { { echo "$as_me:$LINENO: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&5 +echo "$as_me: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&2;} + { (exit 1); exit 1; }; } +fi +echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_cross" >&5 +echo "${ECHO_T}$ac_cv_prog_f9x_cross" >&6 +cross_compiling=$ac_cv_prog_f9x_cross + +echo "$as_me:$LINENO: checking whether we are using GNU Fortran 95" >&5 +echo $ECHO_N "checking whether we are using GNU Fortran 95... $ECHO_C" >&6 +if test "${ac_cv_prog_g9x+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat > conftest.fpp <&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_g9x=yes +else + ac_cv_prog_g9x=no +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_g9x" >&5 +echo "${ECHO_T}$ac_cv_prog_g9x" >&6 + +if test $ac_cv_prog_g9x = yes; then + G9X=yes + ac_test_FFLAGS="${FFLAGS+set}" + ac_save_FFLAGS="$FFLAGS" + FFLAGS= + echo "$as_me:$LINENO: checking whether $F9X accepts -g" >&5 +echo $ECHO_N "checking whether $F9X accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_f9x_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat > conftest.f << EOF + program conftest + end +EOF +if test -z "`$F9X -g -c conftest.f 2>&1`"; then + ac_cv_prog_f9x_g=yes +else + ac_cv_prog_f9x_g=no +fi +rm -f conftest* + +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_g" >&5 +echo "${ECHO_T}$ac_cv_prog_f9x_g" >&6 + if test "$ac_test_FFLAGS" = set; then + FFLAGS="$ac_save_FFLAGS" + elif test $ac_cv_prog_f9x_g = yes; then + FFLAGS="-g -O2" + else + FFLAGS="-O2" + fi +else + G9X= + test "${FFLAGS+set}" = set || FFLAGS="-g" +fi + + echo "$as_me:$LINENO: checking what $F9X does with modules" >&5 +echo $ECHO_N "checking what $F9X does with modules... $ECHO_C" >&6 + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&1 +if test "$modfiles" = file.o; then + echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6 + OLD_FFLAGS=$FFLAGS + FFLAGS="$FFLAGS -em" + eval $ac_compile + modfiles="" + for f in file.o module.mod MODULE.mod module.M MODULE.M; do + test -f $f && modfiles="$f" + done + if test "$modfiles" = "file.o"; then + FFLAGS=$OLD_FFLAGS + echo no 6>&1 + else + echo yes 6>&1 + fi +fi +cd .. + +echo "$as_me:$LINENO: checking how $F9X finds modules" >&5 +echo $ECHO_N "checking how $F9X finds modules... $ECHO_C" >&6 + +for flag in "-I" "-M" "-p"; do + cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + F9XMODFLAG=$flag + break + fi +done + +if test -n "$F9XMODFLAG"; then + echo $F9XMODFLAG 1>&6 + FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS" +else + echo unknown 1>&6 +fi + + +rm -rf conftest* + + + ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + + FFLAGS_saved=$FFLAGS + FFLAGS="$FFLAGS -I." + + echo "$as_me:$LINENO: checking if compiler supports -I. option" >&5 +echo $ECHO_N "checking if compiler supports -I. option... $ECHO_C" >&6 + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + : + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + : + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + FFLAGS="$FFLAGS_saved" +fi +cd .. +rm -rf conftest* + + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +else + echo "no" +fi + +echo "$as_me:$LINENO: checking if c++ interface enabled" >&5 +echo $ECHO_N "checking if c++ interface enabled... $ECHO_C" >&6 +# Check whether --enable-cxx or --disable-cxx was given. +if test "${enable_cxx+set}" = set; then + enableval="$enable_cxx" + HDF_CXX=$enableval +fi; + +if test "X$HDF_CXX" = "Xyes"; then + echo "yes" + HDF5_INTERFACES="$HDF5_INTERFACES c++" + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + echo "$as_me:$LINENO: result: $CXX" >&5 +echo "${ECHO_T}$CXX" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +echo "${ECHO_T}$ac_ct_CXX" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CXX" && break +done +test -n "$ac_ct_CXX" || ac_ct_CXX="g++" + + CXX=$ac_ct_CXX +fi + + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C++ compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 +GXX=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +CXXFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cxx_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cxx_g=yes +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +ac_cv_prog_cxx_g=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include +$ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +$ac_declaration +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 + cat conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 + cat conftest.$ac_ext >&5 + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +echo "$as_me:$LINENO: result: $CXXCPP" >&5 +echo "${ECHO_T}$CXXCPP" >&6 +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 + cat conftest.$ac_ext >&5 + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + egrep -v '^ *\+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 + cat conftest.$ac_ext >&5 + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + echo "$as_me:$LINENO: checking if $CXX needs old style header files in includes" >&5 +echo $ECHO_N "checking if $CXX needs old style header files in includes... $ECHO_C" >&6 + +if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 +echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +#include + +int main(void) { return 0; } + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + + echo no + +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +( exit $ac_status ) + + echo yes + CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" + +fi +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + echo "$as_me:$LINENO: checking if $CXX can handle namespaces" >&5 +echo $ECHO_N "checking if $CXX can handle namespaces... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 +echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +namespace H5 { +int fnord; +} + +int main(void) { + using namespace H5; + fnord = 37; + return 0; +} + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + + echo yes + +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +( exit $ac_status ) + + echo no + CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" + +fi +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + echo "$as_me:$LINENO: checking if $CXX supports std" >&5 +echo $ECHO_N "checking if $CXX supports std... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 +echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +#include + +using namespace std; + +int main(void) { + string myString("testing namespace std"); + return 0; +} + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + + echo yes -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +( exit $ac_status ) -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs + echo no + CXXFLAGS="${CXXFLAGS} -DH5_NO_STD" -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec +fi +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator + echo "$as_me:$LINENO: checking if $CXX supports bool types" >&5 +echo $ECHO_N "checking if $CXX supports bool types... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 +echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct +int main(void) { + bool flag; + return 0; +} -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var + echo yes -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +( exit $ac_status ) -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs + echo no + CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED" -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +fi +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + echo "$as_me:$LINENO: checking if $CXX can handle static cast" >&5 +echo $ECHO_N "checking if $CXX can handle static cast... $ECHO_C" >&6 + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5 +echo "$as_me: error: cannot run test program while cross compiling" >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" +int main(void) { + float test_float; + int test_int; + test_float = 37.0; + test_int = static_cast (test_float); + return 0; +} -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds + echo yes -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +( exit $ac_status ) -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms + echo no + CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms +fi +rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi -# ### END LIBTOOL CONFIG + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -__EOF__ +else + echo "no" +fi - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" +echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5 +echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6 +# Check whether --enable-static_exec or --disable-static_exec was given. +if test "${enable_static_exec+set}" = set; then + enableval="$enable_static_exec" + STATIC_EXEC=$enableval +fi; -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES +if test "X$STATIC_EXEC" = "Xyes"; then + echo "yes" + LT_STATIC_EXEC="-all-static" +else + echo "no" + LT_STATIC_EXEC="" fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + PERL="" +if test "X$GCC" = "Xyes"; then + for ac_prog in perl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_PERL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$PERL"; then + ac_cv_prog_PERL="$PERL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_PERL="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" +fi +fi +PERL=$ac_cv_prog_PERL +if test -n "$PERL"; then + echo "$as_me:$LINENO: result: $PERL" >&5 +echo "${ECHO_T}$PERL" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi + test -n "$PERL" && break +done +fi +if test -z "$AR"; then + for ac_prog in ar xar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' + test -n "$AR" && break +done +test -n "$AR" || AR=":" -# Prevent multiple expansion +fi +export AR case $host_os in linux*) @@ -7458,8 +8537,20 @@ echo "${ECHO_T}production" >&6 CFLAGS=$CFLAGS_temp fi + CXXFLAGS_temp="" + if test -n "$CXXFLAGS"; then + for d in $CXXFLAGS ; do + if test "X$d" != "X-g"; then + CXXFLAGS_temp="$CXXFLAGS_temp $d" + fi + done + CXXFLAGS=$CXXFLAGS_temp + fi + CONFIG_MODE=production CFLAGS="$CFLAGS $PROD_CFLAGS" + CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS" + CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" ;; X-|X-no) @@ -7468,6 +8559,7 @@ echo "${ECHO_T}production" >&6 echo "${ECHO_T}development" >&6 CONFIG_MODE=development CFLAGS="$CFLAGS $DEBUG_CFLAGS" + CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS" CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" ;; X-pg|X-profile) @@ -7476,6 +8568,7 @@ echo "${ECHO_T}development" >&6 echo "${ECHO_T}profile" >&6 CONFIG_MODE=profile CFLAGS="$CFLAGS $PROFILE_CFLAGS" + CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS" CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" ;; *) @@ -7554,6 +8647,71 @@ fi if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then +echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char socket (); +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_socket=yes +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +ac_cv_lib_socket_socket=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 +if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSOCKET 1 +_ACEOF + + LIBS="-lsocket $LIBS" + +fi + + echo "$as_me:$LINENO: checking for xdr_int in -lnsl" >&5 echo $ECHO_N "checking for xdr_int in -lnsl... $ECHO_C" >&6 if test "${ac_cv_lib_nsl_xdr_int+set}" = set; then @@ -24875,7 +26033,6 @@ else fi ;; - no) echo "$as_me:$LINENO: checking for GASS" >&5 echo $ECHO_N "checking for GASS... $ECHO_C" >&6 @@ -24883,7 +26040,6 @@ echo $ECHO_N "checking for GASS... $ECHO_C" >&6 echo "${ECHO_T}suppressed" >&6 unset GASS TESTGASS ;; - *) case "$withval" in *,*) @@ -27561,7 +28717,6 @@ rm -f confcache PTHREAD=yes - # Check whether --with-pthread or --without-pthread was given. if test "${with_pthread+set}" = set; then withval="$with_pthread" @@ -30245,6 +31400,7 @@ echo "${ECHO_T}no" >&6 ;; esac + echo "$as_me:$LINENO: checking for API tracing" >&5 echo $ECHO_N "checking for API tracing... $ECHO_C" >&6; # Check whether --enable-trace or --disable-trace was given. @@ -30253,7 +31409,6 @@ if test "${enable_trace+set}" = set; then TRACE=$enableval fi; - if test "X-$TRACE" = X- ; then if test -z "$DEBUG_PKG" ; then TRACE=no @@ -30261,6 +31416,7 @@ if test "X-$TRACE" = X- ; then TRACE=yes fi fi + case "X-$TRACE" in X-yes) echo "$as_me:$LINENO: result: yes" >&5 @@ -30409,6 +31565,60 @@ echo "${ECHO_T}none" >&6 ;; esac +if test "X$HDF_FORTRAN" = "Xyes"; then + ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + + case "$F9X" in + *mpif90*) + PARALLEL=mpif90 + echo "$as_me:$LINENO: checking for mpirun" >&5 +echo $ECHO_N "checking for mpirun... $ECHO_C" >&6 + + cmd=`echo $F9X |cut -f1 -d' '` + if (echo $cmd |grep / >/dev/null); then + path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`" + else + for path in `echo $PATH |tr : ' '`; do + if test -x $path/$cmd; then + break; + fi + done + fi + + if test -x $path/mpirun; then + echo "$as_me:$LINENO: result: $path/mpirun" >&5 +echo "${ECHO_T}$path/mpirun" >&6 + RUNSERIAL="${RUNSERIAL:-none}" + + if test -z "$RUNPARALLEL"; then + RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}" + fi + else + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 + fi + ;; + + *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*) + PARALLEL="$F9X" + ;; + + *) + ;; + esac + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi + # Check whether --enable-parallel or --disable-parallel was given. if test "${enable_parallel+set}" = set; then enableval="$enable_parallel" @@ -30638,6 +31848,185 @@ fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi + if test "X$HDF_FORTRAN" = "Xyes"; then + ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + : + +else + : + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + : + +else + LIBS="$saved_LIBS" + PARALLEL=no +fi +cd .. +rm -rf conftest* + +fi +cd .. +rm -rf conftest* + + + if test "X$PARALLEL" = "Xyes"; then + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + : + +else + : + + +ac_ext=f90 +ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' +ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' +cross_compiling=$ac_cv_prog_f9x_cross + + +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * + +cat >conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + : + +else + LIBS="$saved_LIBS" + PARALLEL=no +fi +cd .. +rm -rf conftest* + +fi +cd .. +rm -rf conftest* + + fi + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi + if test "X$PARALLEL" = "Xyes" -a -z "$RUNPARALLEL"; then RUNPARALLEL="mpirun -np \$\${NPROCS:=3}" fi @@ -30652,11 +32041,11 @@ echo "$as_me: error: \'$enable_parallel\' is not a valid parallel search type" > ;; esac -if test -n "$PARALLEL"; then - TESTPARALLEL=testpar -fi + ADD_PARALLEL_FILES="no" if test -n "$PARALLEL"; then + TESTPARALLEL=testpar + cat >>confdefs.h <<\_ACEOF #define HAVE_PARALLEL 1 @@ -30687,7 +32076,7 @@ echo $ECHO_N "checking whether a simple MPI-IO program can be linked... $ECHO_C" int main () { -MPI_Init();MPI_File_open(); +MPI_Init(); MPI_File_open(); ; return 0; } @@ -30711,8 +32100,8 @@ else cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 - { { echo "$as_me:$LINENO: error: 'unable to link a simple MPI-IO application'" >&5 -echo "$as_me: error: 'unable to link a simple MPI-IO application'" >&2;} + { { echo "$as_me:$LINENO: error: unable to link a simple MPI-IO application" >&5 +echo "$as_me: error: unable to link a simple MPI-IO application" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext @@ -30730,6 +32119,106 @@ echo "$as_me: error: no way to run a parallel program" >&2;} RUNPARALLEL="" fi + if test "X$HDF_FORTRAN" = "Xyes"; then + ADD_PARALLEL_FILES="yes" + echo "$as_me:$LINENO: checking for MPI_Comm_c2f and MPI_Comm_f2c functions" >&5 +echo $ECHO_N "checking for MPI_Comm_c2f and MPI_Comm_f2c functions... $ECHO_C" >&6 + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +MPI_Comm c_comm; MPI_Comm_c2f(c_comm) + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MPI_MULTI_LANG_Comm 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + + echo "$as_me:$LINENO: checking for MPI_Info_c2f and MPI_Info_f2c functions" >&5 +echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +#include "confdefs.h" +#include +#ifdef F77_DUMMY_MAIN +# ifdef __cplusplus + extern "C" +# endif + int F77_DUMMY_MAIN() { return 1; } +#endif +int +main () +{ +MPI_Info c_info; MPI_Info_c2f(c_info) + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MPI_MULTI_LANG_Info 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me: failed program was:" >&5 +cat conftest.$ac_ext >&5 +echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + fi + MPE=yes @@ -31546,6 +33035,7 @@ _ACEOF fi + echo "$as_me:$LINENO: checking for I/O filters" >&5 echo $ECHO_N "checking for I/O filters... $ECHO_C" >&6 # Check whether --enable-filters or --disable-filters was given. @@ -31554,7 +33044,6 @@ if test "${enable_filters+set}" = set; then FILTERS=$enableval fi; - all_filters="shuffle,fletcher32" case "X-$FILTERS" in X-|X-all) @@ -31575,7 +33064,7 @@ esac if test -n "$FILTERS"; then for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do - if test $filter = "SHUFFLE"; then + if test $filter = "SHUFFLE"; then cat >>confdefs.h <<\_ACEOF #define HAVE_FILTER_SHUFFLE 1 @@ -31626,11 +33115,13 @@ if (grep '^build_libtool_libs=yes' libtool >/dev/null); then else enable_shared=no fi + if (grep '^build_old_libs=yes' libtool >/dev/null); then enable_static=yes else enable_static=no fi + if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then STATIC_SHARED="static, shared" elif test "X$enable_static" = "Xyes"; then @@ -31666,7 +33157,8 @@ else fi ROOT="`$pwd`" -DYNAMIC_DIRS="" + DYNAMIC_DIRS="" + if test -n "$LDFLAGS"; then for d in $LDFLAGS ; do case "$d" in @@ -31683,7 +33175,6 @@ if test -n "$LDFLAGS"; then done fi - if test -n "$CPPFLAGS"; then TEMP_CPPFLAGS="" for d in $CPPFLAGS ; do @@ -31724,16 +33215,21 @@ saved_no_create=$no_create no_create=yes PARALLEL_MAKE="" +FORTRAN_PARALLEL_MAKE="" if test -n "$TESTPARALLEL"; then PARALLEL_MAKE="$TESTPARALLEL/Makefile $TESTPARALLEL/testph5.sh" + + if test "X$HDF_FORTRAN" = "Xyes"; then + FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile + fi fi PABLO_MAKE="" PARALLEL_PABLO="" -if test "$HAVE_PABLO" = "yes"; then +if test "X$HAVE_PABLO" = "Xyes"; then PABLO_MAKE="pablo/Makefile" if test -n "$TESTPARALLEL"; then @@ -31741,7 +33237,26 @@ if test "$HAVE_PABLO" = "yes"; then fi fi -ac_config_files="$ac_config_files src/libhdf5.settings config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile $PABLO_MAKE test/Makefile $PARALLEL_MAKE perform/Makefile tools/Makefile tools/h5dump/Makefile tools/h5import/Makefile tools/h5diff/Makefile tools/h5ls/Makefile tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/gifconv/Makefile examples/Makefile doc/Makefile doc/html/Makefile doc/html/ed_libs/Makefile doc/html/ed_styles/Makefile doc/html/ADGuide/Makefile doc/html/Graphics/Makefile doc/html/Intro/Makefile doc/html/PSandPDF/Makefile doc/html/TechNotes/Makefile doc/html/Tutor/Makefile doc/html/Tutor/Graphics/Makefile doc/html/Tutor/examples/Makefile doc/html/cpplus/Makefile doc/html/fortran/Makefile" +if test "X$HDF_FORTRAN" = "Xyes"; then + FORTRAN_FILES="fortran/Makefile + fortran/src/h5fc + fortran/src/H5fortran_types.f90 + fortran/src/libhdf5_fortran.settings + fortran/src/Makefile + fortran/test/Makefile + $FORTRAN_PARALLEL_MAKE + fortran/examples/Makefile" +fi + +if test "X$HDF_CXX" = "Xyes"; then + CXX_FILES="c++/Makefile + c++/src/Makefile + c++/src/h5c++ + c++/test/Makefile + c++/examples/Makefile" +fi + +ac_config_files="$ac_config_files src/libhdf5.settings config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/Makefile $PABLO_MAKE test/Makefile $PARALLEL_MAKE perform/Makefile tools/Makefile tools/h5dump/Makefile tools/h5import/Makefile tools/h5diff/Makefile tools/h5ls/Makefile tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/gifconv/Makefile examples/Makefile doc/Makefile doc/html/Makefile doc/html/ed_libs/Makefile doc/html/ed_styles/Makefile doc/html/ADGuide/Makefile doc/html/Graphics/Makefile doc/html/Intro/Makefile doc/html/PSandPDF/Makefile doc/html/TechNotes/Makefile doc/html/Tutor/Makefile doc/html/Tutor/Graphics/Makefile doc/html/Tutor/examples/Makefile doc/html/cpplus/Makefile doc/html/fortran/Makefile $FORTRAN_FILES $CXX_FILES" cat >confcache <<\_ACEOF @@ -32263,6 +33778,8 @@ do "doc/html/Tutor/examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/html/Tutor/examples/Makefile" ;; "doc/html/cpplus/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/html/cpplus/Makefile" ;; "doc/html/fortran/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/html/fortran/Makefile" ;; + "$FORTRAN_FILES" ) CONFIG_FILES="$CONFIG_FILES $FORTRAN_FILES" ;; + "$CXX_FILES" ) CONFIG_FILES="$CONFIG_FILES $CXX_FILES" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "src/H5config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/H5config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 @@ -32363,11 +33880,6 @@ s,@LDFLAGS@,$LDFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t -s,@config_dirs@,$config_dirs,;t t -s,@subdirs@,$subdirs,;t t -s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t -s,@PERL@,$PERL,;t t -s,@AR@,$AR,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t @@ -32380,6 +33892,27 @@ s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@CPP@,$CPP,;t t s,@LIBTOOL@,$LIBTOOL,;t t +s,@HDF5_INTERFACES@,$HDF5_INTERFACES,;t t +s,@R_LARGE@,$R_LARGE,;t t +s,@R_INTEGER@,$R_INTEGER,;t t +s,@HSIZE_T@,$HSIZE_T,;t t +s,@HSSIZE_T@,$HSSIZE_T,;t t +s,@HID_T@,$HID_T,;t t +s,@SIZE_T@,$SIZE_T,;t t +s,@OBJECT_NAMELEN_DEFAULT_F@,$OBJECT_NAMELEN_DEFAULT_F,;t t +s,@FFLAGS@,$FFLAGS,;t t +s,@F9XSUFFIXFLAG@,$F9XSUFFIXFLAG,;t t +s,@FSEARCH_DIRS@,$FSEARCH_DIRS,;t t +s,@F9X@,$F9X,;t t +s,@F9XMODFLAG@,$F9XMODFLAG,;t t +s,@F9XMODEXT@,$F9XMODEXT,;t t +s,@CXX@,$CXX,;t t +s,@CXXFLAGS@,$CXXFLAGS,;t t +s,@ac_ct_CXX@,$ac_ct_CXX,;t t +s,@CXXCPP@,$CXXCPP,;t t +s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t +s,@PERL@,$PERL,;t t +s,@AR@,$AR,;t t /@DEPEND@/r $DEPEND s,@DEPEND@,,;t t s,@PABLO@,$PABLO,;t t @@ -32397,6 +33930,7 @@ s,@PARALLEL@,$PARALLEL,;t t s,@RUNSERIAL@,$RUNSERIAL,;t t s,@RUNPARALLEL@,$RUNPARALLEL,;t t s,@TESTPARALLEL@,$TESTPARALLEL,;t t +s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t s,@MPE@,$MPE,;t t s,@FILTERS@,$FILTERS,;t t s,@H5_VERSION@,$H5_VERSION,;t t @@ -32931,145 +34465,6 @@ if test "$no_create" != yes; then $ac_cs_success || { (exit 1); exit 1; } fi -# -# CONFIG_SUBDIRS section. -# -if test "$no_recursion" != yes; then - - # Remove --cache-file and --srcdir arguments so they do not pile up. - ac_sub_configure_args= - ac_prev= - for ac_arg in $ac_configure_args; do - if test -n "$ac_prev"; then - ac_prev= - continue - fi - case $ac_arg in - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ - | --c=*) - ;; - --config-cache | -C) - ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - ;; - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - ;; - *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;; - esac - done - - # Always prepend --prefix to ensure using the same prefix - # in subdir configurations. - ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args" - - ac_popdir=`pwd` - for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue - - # Do not complain, so a configure script can configure whichever - # parts of a large source tree are present. - test -d $srcdir/$ac_dir || continue - - { echo "$as_me:$LINENO: configuring in $ac_dir" >&5 -echo "$as_me: configuring in $ac_dir" >&6;} - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - cd $ac_dir - - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'" - elif test -f $ac_srcdir/configure; then - ac_sub_configure="$SHELL '$ac_srcdir/configure'" - elif test -f $ac_srcdir/configure.in; then - ac_sub_configure=$ac_configure - else - { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5 -echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} - ac_sub_configure= - fi - - # The recursion is here. - if test -n "$ac_sub_configure"; then - # Make the cache file name correct relative to the subdirectory. - case $cache_file in - [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; - *) # Relative path. - ac_sub_cache_file=$ac_top_builddir$cache_file ;; - esac - - { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 -echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} - # The eval makes quoting arguments work. - eval $ac_sub_configure $ac_sub_configure_args \ - --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir || - { { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5 -echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;} - { (exit 1); exit 1; }; } - fi - - cd $ac_popdir - done -fi - no_create=$saved_no_create # Then the stamp2 file for H5config.h @@ -33080,6 +34475,14 @@ test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 chmod 755 tools/misc/h5cc +if test "X$HDF_FORTRAN" = "Xyes"; then + chmod 755 fortran/src/h5fc +fi + +if test "X$HDF_CXX" = "Xyes"; then + chmod 755 c++/src/h5c++ +fi + cat >> src/H5config.h < + +int main(void) { return 0; } + ], [ + echo no + ], [ + echo yes + CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" + ]) + + AC_MSG_CHECKING([if $CXX can handle namespaces]) + AC_TRY_RUN([ +namespace H5 { +int fnord; +} + +int main(void) { + using namespace H5; + fnord = 37; + return 0; +} + ], [ + echo yes + ], [ + echo no + CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" + ]) + + AC_MSG_CHECKING([if $CXX supports std]) + AC_TRY_RUN([ +#include + +using namespace std; + +int main(void) { + string myString("testing namespace std"); + return 0; +} + ], [ + echo yes + ], [ + echo no + CXXFLAGS="${CXXFLAGS} -DH5_NO_STD" + ]) + + AC_MSG_CHECKING([if $CXX supports bool types]) + AC_TRY_RUN([ +int main(void) { + bool flag; + return 0; +} + ], [ + echo yes + ], [ + echo no + CXXFLAGS="${CXXFLAGS} -DBOOL_NOTDEFINED" + ]) + + AC_MSG_CHECKING([if $CXX can handle static cast]) + AC_TRY_RUN([ +int main(void) { + float test_float; + int test_int; + test_float = 37.0; + test_int = static_cast (test_float); + return 0; +} + ], [ + echo yes + ], [ + echo no + CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" + ]) + + dnl Change to the C language + AC_LANG_C else echo "no" fi -dnl Run configure in the subdirectories if specified -AC_CONFIG_SUBDIRS([${config_dirs}]) - dnl ---------------------------------------------------------------------- dnl If we should build only static executables dnl @@ -278,11 +399,6 @@ dnl Export the AR macro so that it will be placed in the libtool file dnl correctly. export AR -AC_PROG_MAKE_SET -AC_PROG_INSTALL -AC_LIBTOOL_DLOPEN -AC_PROG_LIBTOOL - dnl Post processing to patch up some deficiencies in libtool case $host_os in linux*) @@ -460,8 +576,20 @@ case "X-$enable_production" in CFLAGS=$CFLAGS_temp fi + CXXFLAGS_temp="" + if test -n "$CXXFLAGS"; then + for d in $CXXFLAGS ; do + if test "X$d" != "X-g"; then + CXXFLAGS_temp="$CXXFLAGS_temp $d" + fi + done + CXXFLAGS=$CXXFLAGS_temp + fi + CONFIG_MODE=production CFLAGS="$CFLAGS $PROD_CFLAGS" + CXXFLAGS="$CXXFLAGS $PROD_CXXFLAGS" + CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" ;; X-|X-no) @@ -469,6 +597,7 @@ case "X-$enable_production" in AC_MSG_RESULT([development]) CONFIG_MODE=development CFLAGS="$CFLAGS $DEBUG_CFLAGS" + CXXFLAGS="$CXXFLAGS $DEBUG_CXXFLAGS" CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" ;; X-pg|X-profile) @@ -476,6 +605,7 @@ case "X-$enable_production" in AC_MSG_RESULT([profile]) CONFIG_MODE=profile CFLAGS="$CFLAGS $PROFILE_CFLAGS" + CXXFLAGS="$CXXFLAGS $PROFILE_CXXFLAGS" CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" ;; *) @@ -836,8 +966,7 @@ case $withval in esac if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then - AC_DEFINE(HAVE_FILTER_DEFLATE, 1, - [Define if support for deflate filter is enabled]) + AC_DEFINE([HAVE_FILTER_DEFLATE], [1], [Define if support for deflate filter is enabled]) dnl Add "deflate" to external filter list if test "X$EXTERNAL_FILTERS" != "X"; then @@ -1017,9 +1146,11 @@ case "$withval" in ;; esac -dnl Is SSL library present? It is needed by GLOBUS-GASS and Grid Storage -dnl driver. SSL must be tested before them. -AC_SUBST(SSL) SSL=yes +dnl ---------------------------------------------------------------------- +dnl Is SSL library present? It is needed by GLOBUS-GASS and Grid Storage +dnl driver. SSL must be tested before them. +dnl +AC_SUBST([SSL]) SSL=yes AC_ARG_WITH([ssl], [AC_HELP_STRING([--with-ssl=LIB], [Use the SSL library [default=no]])],, @@ -1027,12 +1158,12 @@ AC_ARG_WITH([ssl], case "$withval" in yes) - AC_CHECK_LIB(crypto,main,,unset SSL) - AC_CHECK_LIB(ssl,SSL_get_version,,unset SSL) + AC_CHECK_LIB([crypto], [main],, [unset SSL]) + AC_CHECK_LIB([ssl], [SSL_get_version],, [unset SSL]) ;; no) - AC_MSG_CHECKING(for SSL) - AC_MSG_RESULT(suppressed) + AC_MSG_CHECKING([for SSL]) + AC_MSG_RESULT([suppressed]) unset SSL ;; *) @@ -1040,8 +1171,8 @@ case "$withval" in if test "X$with_ssl" != "X/usr/lib"; then LDFLAGS="$LDFLAGS -L$with_ssl" fi - AC_CHECK_LIB(crypto,main,, LDFLAGS="$saved_LDFLAGS"; unset SSL) - AC_CHECK_LIB(ssl,SSL_get_version,, LDFLAGS="$saved_LDFLAGS"; unset SSL) + AC_CHECK_LIB([crypto], [main],, [LDFLAGS="$saved_LDFLAGS"; unset SSL]) + AC_CHECK_LIB([ssl], [SSL_get_version],, [LDFLAGS="$saved_LDFLAGS"; unset SSL]) ;; esac @@ -1049,8 +1180,8 @@ dnl ---------------------------------------------------------------------- dnl Is GLOBUS-GASS(1.1.0 or 1.1.1) Library present? It is also needed by dnl the Grid Storage driver. dnl -AC_SUBST(GASS) GASS="yes" -AC_SUBST(TESTGASS) TESTGASS='$(srcdir)/testgass' +AC_SUBST([GASS]) GASS="yes" +AC_SUBST([TESTGASS]) TESTGASS='$(srcdir)/testgass' AC_ARG_WITH([gass], [AC_HELP_STRING([--with-gass=DIR], [Use the GASS library [default=no]])],, @@ -1069,13 +1200,11 @@ case "$withval" in AC_CHECK_LIB(globus_gass_transfer,main,,unset GASS TESTGASS) AC_CHECK_LIB(globus_gass_file,globus_gass_open,,unset GASS TESTGASS) ;; - no) - AC_MSG_CHECKING(for GASS) - AC_MSG_RESULT(suppressed) + AC_MSG_CHECKING([for GASS]) + AC_MSG_RESULT([suppressed]) unset GASS TESTGASS ;; - *) case "$withval" in *,*) @@ -1102,11 +1231,11 @@ case "$withval" in if test -n "$gass_inc"; then saved_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I$gass_inc" - AC_CHECK_HEADERS(globus_common.h,, + AC_CHECK_HEADERS([globus_common.h],, CPPFLAGS="$saved_CPPFLAGS" unset GASS TESTGASS) else - AC_CHECK_HEADERS(globus_common.h) + AC_CHECK_HEADERS([globus_common.h]) fi if test -n "$gass_lib"; then @@ -1136,15 +1265,14 @@ case "$withval" in esac if test -n "$GASS"; then - AC_DEFINE([HAVE_GASS], [1], - [Define if the Globus GASS is defined]) + AC_DEFINE([HAVE_GASS], [1], [Define if the Globus GASS is defined]) fi dnl ---------------------------------------------------------------------- dnl Are SRB Client and other system libraries(socket, elf) present? dnl -AC_SUBST(SRB) SRB="yes" -AC_SUBST(TESTSRB) TESTSRB='$(srcdir)/testsrb' +AC_SUBST([SRB]) SRB="yes" +AC_SUBST([TESTSRB]) TESTSRB='$(srcdir)/testsrb' AC_ARG_WITH([srb], [AC_HELP_STRING([--with-srb=DIR], [Use the SRB library [default=no]])],, @@ -1152,14 +1280,14 @@ AC_ARG_WITH([srb], case "$withval" in yes) - AC_CHECK_HEADERS(srbClient.h,,unset SRB TESTSRB) - AC_CHECK_LIB(elf,main,,unset SRB TESTSRB) - AC_CHECK_LIB(socket,main,,unset SRB TESTSRB) - AC_CHECK_LIB(SrbClient,clConnect,,unset SRB TESTSRB) + AC_CHECK_HEADERS([srbClient.h],, [unset SRB TESTSRB]) + AC_CHECK_LIB([elf], [main],, [unset SRB TESTSRB]) + AC_CHECK_LIB([socket], [main],, [unset SRB TESTSRB]) + AC_CHECK_LIB([SrbClient], [clConnect],, [unset SRB TESTSRB]) ;; no) - AC_MSG_CHECKING(for SRB) - AC_MSG_RESULT(suppressed) + AC_MSG_CHECKING([for SRB]) + AC_MSG_RESULT([suppressed]) unset SRB TESTSRB ;; *) @@ -1210,18 +1338,17 @@ case "$withval" in esac if test -n "$SRB"; then - AC_DEFINE(HAVE_SRB, 1, - [Define if the SRB is defined]) + AC_DEFINE([HAVE_SRB], [1], [Define if the SRB is defined]) fi dnl ---------------------------------------------------------------------- dnl Is LLNL's PDB present? If so then we'll compile the PDB-to-HDF5 dnl translator. dnl -AC_SUBST(PDB2HDF) -AC_CHECK_LIB(pdb, PD_open) -AC_CHECK_LIB(silo, lite_PD_open) -AC_CHECK_HEADERS(pdb.h, PDB2HDF=pdb2hdf) +AC_SUBST([PDB2HDF]) +AC_CHECK_LIB([pdb], [PD_open]) +AC_CHECK_LIB([silo], [lite_PD_open]) +AC_CHECK_HEADERS([pdb.h], [PDB2HDF=pdb2hdf]) dnl Checkpoint the cache AC_CACHE_SAVE @@ -1233,8 +1360,7 @@ dnl `--with-pthread' command-line switch. The value is an include path dnl and/or a library path. If the library path is specified then it must dnl be preceded by a comma. dnl -AC_SUBST(PTHREAD) PTHREAD=yes - +AC_SUBST([PTHREAD]) PTHREAD=yes AC_ARG_WITH([pthread], [AC_HELP_STRING([--with-pthread=DIR], [Use the Pthreads library [default=no]])],, @@ -1242,12 +1368,12 @@ AC_ARG_WITH([pthread], case "$withval" in yes) - AC_CHECK_HEADERS(pthread.h) - AC_CHECK_LIB(pthread, pthread_create,,unset PTHREAD) + AC_CHECK_HEADERS([pthread.h]) + AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD]) ;; no) - AC_MSG_CHECKING(for pthread) - AC_MSG_RESULT(suppressed) + AC_MSG_CHECKING([for pthread]) + AC_MSG_RESULT([suppressed]) unset PTHREAD ;; *) @@ -1276,18 +1402,18 @@ case "$withval" in if test -n "$pthread_inc"; then saved_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS -I$pthread_inc" - AC_CHECK_HEADERS(pthread.h,,CPPFLAGS="$saved_CPPFLAGS"; unset PTHREAD) + AC_CHECK_HEADERS([pthread.h],, [CPPFLAGS="$saved_CPPFLAGS"; unset PTHREAD]) else - AC_CHECK_HEADERS(pthread.h,,unset PTHREAD) + AC_CHECK_HEADERS([pthread.h],, [unset PTHREAD]) fi if test -n "$pthread_lib"; then saved_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -L$pthread_lib" - AC_CHECK_LIB(pthread, pthread_create,, - LDFLAGS="$saved_LDFLAGS"; unset PTHREAD) + AC_CHECK_LIB([pthread], [pthread_create],, + [LDFLAGS="$saved_LDFLAGS"; unset PTHREAD]) else - AC_CHECK_LIB(pthread, pthread_create,,unset PTHREAD) + AC_CHECK_LIB([pthread], [pthread_create],, [unset PTHREAD]) fi ;; esac @@ -1295,7 +1421,7 @@ esac dnl ---------------------------------------------------------------------- dnl Enable thread-safe version of library. It requires Pthreads support. dnl -AC_MSG_CHECKING(for thread safe support) +AC_MSG_CHECKING([for thread safe support]) AC_ARG_ENABLE([threadsafe], [AC_HELP_STRING([--enable-threadsafe], [Enable thread safe capability])], @@ -1303,23 +1429,22 @@ AC_ARG_ENABLE([threadsafe], case "X-$THREADSAFE" in X-|X-no) - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) ;; X-yes) dnl Check that we can link a simple Pthread program. - AC_TRY_LINK(,pthread_create(), - AC_MSG_RESULT(yes); THREADSAFE=yes, - AC_MSG_ERROR(needed pthread library not available)) + AC_TRY_LINK(, [pthread_create()], + [AC_MSG_RESULT([yes]); THREADSAFE=yes], + [AC_MSG_ERROR([needed pthread library not available])]) ;; *) - AC_MSG_RESULT(error) - AC_MSG_ERROR(\'$enableval\' is not a valid threadsafe type) + AC_MSG_RESULT([error]) + AC_MSG_ERROR([\'$enableval\' is not a valid threadsafe type]) ;; esac if test "X$THREADSAFE" = "Xyes"; then - AC_DEFINE([HAVE_THREADSAFE], [1], - [Define if we have thread safe support]) + AC_DEFINE([HAVE_THREADSAFE], [1], [Define if we have thread safe support]) fi dnl ---------------------------------------------------------------------- @@ -1373,8 +1498,7 @@ if test "$STREAM_VFD" = "yes"; then #endif ], [socklen_t foo; return 0;], - AC_DEFINE([HAVE_SOCKLEN_T], 1, - [Define if \`socklen_t' is defined]) + AC_DEFINE([HAVE_SOCKLEN_T], 1, [Define if \`socklen_t' is defined]) AC_MSG_RESULT([yes]), AC_MSG_RESULT([no]) ) @@ -1388,57 +1512,57 @@ dnl Posix way to do this? dnl dnl First check if `struct tm' has a `tm_gmtoff' member. -AC_MSG_CHECKING(for tm_gmtoff in struct tm) +AC_MSG_CHECKING([for tm_gmtoff in struct tm]) AC_TRY_COMPILE([ #include -#include ],[struct tm tm; tm.tm_gmtoff=0;], -AC_DEFINE(HAVE_TM_GMTOFF, 1, +#include ], [struct tm tm; tm.tm_gmtoff=0;], +AC_DEFINE([HAVE_TM_GMTOFF], [1], [Define if \`tm_gmtoff' is a member of \`struct tm']) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl check if `struct tm' has a `__tm_gmtoff' member. -AC_MSG_CHECKING(for __tm_gmtoff in struct tm) +AC_MSG_CHECKING([for __tm_gmtoff in struct tm]) AC_TRY_COMPILE([ #include -#include ],[struct tm tm; tm.__tm_gmtoff=0;], -AC_DEFINE(HAVE___TM_GMTOFF, 1, +#include ], [struct tm tm; tm.__tm_gmtoff=0;], +AC_DEFINE([HAVE___TM_GMTOFF], [1], [Define if \`__tm_gmtoff' is a member of \`struct tm']) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl Check whether the global variable `timezone' is defined. -AC_MSG_CHECKING(for global timezone variable) +AC_MSG_CHECKING([for global timezone variable]) AC_TRY_LINK([ #include #include ], [timezone=0;], -AC_DEFINE(HAVE_TIMEZONE, 1, +AC_DEFINE([HAVE_TIMEZONE], [1], [Define if \`timezone' is a global variable]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl Check whether `struct timezone' is defined. AC_STRUCT_TIMEZONE -AC_MSG_CHECKING(for struct timezone) +AC_MSG_CHECKING([for struct timezone]) AC_TRY_COMPILE([ #include #include -#include ],[struct timezone tz; tz.tz_minuteswest=0;], -AC_DEFINE(HAVE_STRUCT_TIMEZONE, 1, +#include ], [struct timezone tz; tz.tz_minuteswest=0;], +AC_DEFINE([HAVE_STRUCT_TIMEZONE], [1], [Define if \`struct timezone' is defined]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl ---------------------------------------------------------------------- dnl Does the struct stat have the st_blocks field? This field is not Posix. dnl -AC_MSG_CHECKING(for st_blocks in struct stat) +AC_MSG_CHECKING([for st_blocks in struct stat]) AC_TRY_COMPILE([ #include ],[struct stat sb; sb.st_blocks=0;], -AC_DEFINE(HAVE_STAT_ST_BLOCKS, 1, +AC_DEFINE([HAVE_STAT_ST_BLOCKS], [1], [Define if \`struct stat' has the \`st_blocks' field]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl ---------------------------------------------------------------------- dnl How do we figure out the width of a tty in characters? @@ -1446,33 +1570,33 @@ dnl AC_CHECK_FUNCS(_getvideoconfig gettextinfo GetConsoleScreenBufferInfo) AC_CHECK_FUNCS(_scrsize ioctl) -AC_MSG_CHECKING(for struct videoconfig) +AC_MSG_CHECKING([for struct videoconfig]) AC_TRY_COMPILE(,[struct videoconfig w; w.numtextcols=0;], -AC_DEFINE(HAVE_STRUCT_VIDEOCONFIG, 1, +AC_DEFINE([HAVE_STRUCT_VIDEOCONFIG], [1], [Define if \`struct videoconfig' is defined]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) -AC_MSG_CHECKING(for struct text_info) -AC_TRY_COMPILE(,[struct text_info w; w.screenwidth=0;], -AC_DEFINE(HAVE_STRUCT_TEXT_INFO, 1, +AC_MSG_CHECKING([for struct text_info]) +AC_TRY_COMPILE(, [struct text_info w; w.screenwidth=0;], +AC_DEFINE([HAVE_STRUCT_TEXT_INFO], [1], [Define if \`struct text_info' is defined]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) -AC_MSG_CHECKING(for TIOCGWINSZ) +AC_MSG_CHECKING([for TIOCGWINSZ]) AC_TRY_COMPILE([#include ],[int w=TIOCGWINSZ;], -AC_DEFINE(HAVE_TIOCGWINSZ, 1, +AC_DEFINE([HAVE_TIOCGWINSZ], [1], [Define if the ioctl TIOGWINSZ is defined]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) -AC_MSG_CHECKING(for TIOCGGETD) +AC_MSG_CHECKING([for TIOCGGETD]) AC_TRY_COMPILE([#include ],[int w=TIOCGETD;], -AC_DEFINE(HAVE_TIOCGETD, 1, +AC_DEFINE([HAVE_TIOCGETD], [1], [Define if the ioctl TIOCGETD is defined]) -AC_MSG_RESULT(yes), -AC_MSG_RESULT(no)) +AC_MSG_RESULT([yes]), +AC_MSG_RESULT([no])) dnl ---------------------------------------------------------------------- @@ -1490,17 +1614,17 @@ AC_C_INLINE AC_MSG_CHECKING([for __attribute__ extension]) AC_TRY_COMPILE(,[int __attribute__((unused)) x], - AC_DEFINE(HAVE_ATTRIBUTE, 1, + AC_DEFINE([HAVE_ATTRIBUTE], [1], [Define if the __attribute__(()) extension is present]) AC_MSG_RESULT(yes), AC_MSG_RESULT(no)) AC_MSG_CHECKING([for __FUNCTION__ extension]) AC_TRY_COMPILE(,[(void)__FUNCTION__], - AC_DEFINE(HAVE_FUNCTION, 1, + AC_DEFINE([HAVE_FUNCTION], [1], [Define if the compiler understand the __FUNCTION__ keyword]) - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no)) + AC_MSG_RESULT([yes]), + AC_MSG_RESULT([no])) dnl ---------------------------------------------------------------------- dnl Try to figure out how to print `long long'. Some machines use `%lld' @@ -1510,7 +1634,7 @@ dnl Need to patch up LD_LIBRARY_PATH so that the execution can find all dnl the dynamic library. The correct way to do it should be updating dnl LD_LIBRARY_PATH along with LDFLAGS or do it with the AC_TRY_RUN macro. dnl -AC_MSG_CHECKING(how to print long long) +AC_MSG_CHECKING([how to print long long]) AC_CACHE_VAL([hdf5_cv_printf_ll], LD_LIBRARY_PATH="$LD_LIBRARY_PATH`echo $LDFLAGS | sed -e 's/-L/:/g' -e 's/ //g'`" export LD_LIBRARY_PATH @@ -1531,16 +1655,16 @@ int main(void) ], break,,continue) done)dnl -AC_MSG_RESULT(%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u) -AC_DEFINE_UNQUOTED(PRINTF_LL_WIDTH, "$hdf5_cv_printf_ll", +AC_MSG_RESULT([%${hdf5_cv_printf_ll}d and %${hdf5_cv_printf_ll}u]) +AC_DEFINE_UNQUOTED([PRINTF_LL_WIDTH], ["$hdf5_cv_printf_ll"], [Width for printf() for type \`long long' or \`__int64', us. \`ll']) dnl ---------------------------------------------------------------------- dnl Check if malloc(0) returns valid pointer dnl AC_MSG_CHECKING([if malloc of zero bytes returns valid pointer]) -AC_CACHE_VAL(hdf5_cv_malloc_works, -AC_TRY_RUN([ +AC_CACHE_VAL([hdf5_cv_malloc_works], +[AC_TRY_RUN([ #if STDC_HEADERS #include #endif @@ -1549,14 +1673,14 @@ int main(void) { exit(malloc (0) ? 0 : 1); } -], hdf5_cv_malloc_works=yes, hdf5_cv_malloc_works=no,)) +], [hdf5_cv_malloc_works=yes], [hdf5_cv_malloc_works=no],)]) if test ${hdf5_cv_malloc_works} = "yes"; then - AC_DEFINE(MALLOC_WORKS, 1, + AC_DEFINE([MALLOC_WORKS], [1], [Define if your system has a working \`malloc' function.]) - AC_MSG_RESULT(yes) + AC_MSG_RESULT([yes]) else - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) fi dnl ---------------------------------------------------------------------- @@ -1564,8 +1688,8 @@ dnl Check if pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM) dnl is supported on this system dnl AC_MSG_CHECKING([Threads support system scope]) -AC_CACHE_VAL(hdf5_cv_system_scope_threads, -AC_TRY_RUN([ +AC_CACHE_VAL([hdf5_cv_system_scope_threads], +[AC_TRY_RUN([ #if STDC_HEADERS #include #include @@ -1580,14 +1704,14 @@ int main(void) ret=pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM); exit(ret==0 ? 0 : 1); } -], hdf5_cv_system_scope_threads=yes, hdf5_cv_system_scope_threads=no,)) +], [hdf5_cv_system_scope_threads=yes], [hdf5_cv_system_scope_threads=no],)]) if test ${hdf5_cv_system_scope_threads} = "yes"; then - AC_DEFINE(SYSTEM_SCOPE_THREADS, 1, + AC_DEFINE([SYSTEM_SCOPE_THREADS], [1], [Define if your system supports pthread_attr_setscope(&attribute, PTHREAD_SCOPE_SYSTEM) call.]) - AC_MSG_RESULT(yes) + AC_MSG_RESULT([yes]) else - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) fi dnl ---------------------------------------------------------------------- @@ -1695,14 +1819,14 @@ dnl ---------------------------------------------------------------------- dnl Enable tracing of the API dnl This must come after the enable-debug since it depends on debug. dnl -AC_MSG_CHECKING(for API tracing); +AC_SUBST([TRACE_API]) +AC_MSG_CHECKING([for API tracing]); AC_ARG_ENABLE([trace], [AC_HELP_STRING([--enable-trace], - [Enable API tracing capability. - Default=no if debug is disabled.])], + [Enable API tracing capability. Default=no + if debug is disabled.])], TRACE=$enableval) -AC_SUBST(TRACE_API) dnl Default to no if debug is disabled if test "X-$TRACE" = X- ; then if test -z "$DEBUG_PKG" ; then @@ -1711,14 +1835,15 @@ if test "X-$TRACE" = X- ; then TRACE=yes fi fi + case "X-$TRACE" in X-yes) - AC_MSG_RESULT(yes) + AC_MSG_RESULT([yes]) TRACE_API=yes CPPFLAGS="$CPPFLAGS -DH5_DEBUG_API" ;; X-no|*) - AC_MSG_RESULT(no) + AC_MSG_RESULT([no]) TRACE_API=no CPPFLAGS="$CPPFLAGS -UH5_DEBUG_API" ;; @@ -1764,10 +1889,10 @@ dnl protect the expansion until make executes the dnl command). The value of this variable is dnl substituted in *.in files. dnl -AC_SUBST(PARALLEL) -AC_SUBST(RUNSERIAL) -AC_SUBST(RUNPARALLEL) -AC_SUBST(TESTPARALLEL) +AC_SUBST([PARALLEL]) +AC_SUBST([RUNSERIAL]) +AC_SUBST([RUNPARALLEL]) +AC_SUBST([TESTPARALLEL]) dnl ---------------------------------------------------------------------- dnl If the compiler is obviously a parallel compiler then we're building @@ -1855,6 +1980,64 @@ case "$CC_BASENAME" in esac dnl ---------------------------------------------------------------------- +dnl If the Fortran compiler is obviously a parallel compiler then we're +dnl building a parallel version of hdf5 and should define HAVE_PARALLEL. +dnl Furthermore, the name of the compiler might tell us how to run the +dnl resulting executable. For `mpif90' the executable should be run with +dnl `mpirun' from the same directory as mpif90 if it exists. +dnl +if test "X$HDF_FORTRAN" = "Xyes"; then + dnl Change to the Fortran 90 language + AC_LANG_FORTRAN9X + + case "$F9X" in + *mpif90*) + dnl The Fortran mpich compiler. Use mpirun from the same directory + dnl if it exists. + PARALLEL=mpif90 + AC_MSG_CHECKING([for mpirun]) + + dnl Find the path where mpif90 is located. + cmd=`echo $F9X |cut -f1 -d' '` + if (echo $cmd |grep / >/dev/null); then + path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`" + else + for path in `echo $PATH |tr : ' '`; do + if test -x $path/$cmd; then + break; + fi + done + fi + + dnl Is there an mpirun at that path? + if test -x $path/mpirun; then + AC_MSG_RESULT([$path/mpirun]) + RUNSERIAL="${RUNSERIAL:-none}" + + if test -z "$RUNPARALLEL"; then + RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}" + fi + else + AC_MSG_RESULT([none]) + fi + ;; + + *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*) + dnl The IBM compiler + PARALLEL="$F9X" + ;; + + *) + dnl Probably not a parallel compiler, but if `--enable-parallel' + dnl is defined below then we're still building a parallel hdf5. + ;; + esac + + dnl Change to the C language + AC_LANG_C +fi + +dnl ---------------------------------------------------------------------- dnl What header files and libraries do we have to look for for parallel dnl support? For the most part, search paths are already specified with dnl CPPFLAGS and LDFLAGS or are known to the compiler. If the user says @@ -1872,23 +2055,48 @@ case "X-$enable_parallel" in dnl Either we are not compiling for parallel or the header and dnl library files and locations are known to the compiler (this is dnl the case for a correct installation of mpicc for instance). - AC_MSG_RESULT(skipped) + AC_MSG_RESULT([skipped]) ;; X-yes) dnl We want to compile a parallel library with a compiler that dnl may already know how to link with MPI and MPI-IO. - AC_MSG_RESULT(provided by compiler) + AC_MSG_RESULT([provided by compiler]) PARALLEL=yes dnl Try link a simple MPI program. If fail, try again with -lmpi. - AC_TRY_LINK(,MPI_Init(),,AC_CHECK_LIB(mpi,MPI_Init,,PARALLEL=no)) + AC_TRY_LINK(, MPI_Init(),, AC_CHECK_LIB(mpi, MPI_Init,, PARALLEL=no)) dnl Then try link a simple MPI-IO program. If fail, try again with dnl -lmpio. if test "X$PARALLEL" = "Xyes"; then - AC_TRY_LINK(,MPI_File_open(),, - AC_CHECK_LIB(mpio,MPI_File_open,,PARALLEL=no)) + AC_TRY_LINK(, [MPI_File_open()],, + [AC_CHECK_LIB([mpio], [MPI_File_open],, [PARALLEL=no])]) + fi + + if test "X$HDF_FORTRAN" = "Xyes"; then + dnl Change to the Fortran 90 language + AC_LANG_FORTRAN9X + + dnl Try link a simple MPI program. If fail, try again with -lmpi. + AC_TRY_FLINK(mpif.h, [ + call mpi_file_open( ierr )],, + AC_CHECK_FLIB(mpi, [ + include 'mpif.h' + call mpi_file_open( ierr )],, PARALLEL=no)) + + dnl Then try link a simple MPI-IO program. If fail, try again with + dnl -lmpio. + if test "X$PARALLEL" = "Xyes"; then + AC_TRY_FLINK(mpif.h, [ + call mpi_file_open( ierr )],, + AC_CHECK_FLIB(mpio, [ + include 'mpif.h' + call mpi_file_open( ierr )],, PARALLEL=no)) + fi + + dnl Change to the C language + AC_LANG_C fi dnl Set RUNPARALLEL to mpirun if not set yet. @@ -1898,43 +2106,40 @@ case "X-$enable_parallel" in ;; *) - AC_MSG_RESULT(error) - AC_MSG_ERROR(\'$enable_parallel\' is not a valid parallel search type) + AC_MSG_RESULT([error]) + AC_MSG_ERROR([\'$enable_parallel\' is not a valid parallel search type]) ;; esac dnl ---------------------------------------------------------------------- -dnl Should the 'testpar' directory participate in the build? +dnl Print some other parallel information and do some sanity checks. dnl +AC_SUBST([ADD_PARALLEL_FILES]) ADD_PARALLEL_FILES="no" + if test -n "$PARALLEL"; then + dnl Should the 'testpar' directory participate in the build? TESTPARALLEL=testpar -fi -dnl ---------------------------------------------------------------------- -dnl Print some other parallel information and do some sanity checks. -dnl -if test -n "$PARALLEL"; then dnl We are building a parallel library - AC_DEFINE(HAVE_PARALLEL, 1, - [Define if we have parallel support]) + AC_DEFINE([HAVE_PARALLEL], [1], [Define if we have parallel support]) dnl Display what we found about running programs - AC_MSG_CHECKING(prefix for running on one processor) - AC_MSG_RESULT($RUNSERIAL) - AC_MSG_CHECKING(prefix for running in parallel) - AC_MSG_RESULT($RUNPARALLEL) + AC_MSG_CHECKING([prefix for running on one processor]) + AC_MSG_RESULT([$RUNSERIAL]) + AC_MSG_CHECKING([prefix for running in parallel]) + AC_MSG_RESULT([$RUNPARALLEL]) dnl Check that we can link a simple MPI and MPI-IO application - AC_MSG_CHECKING(whether a simple MPI-IO program can be linked) - AC_TRY_LINK(,[MPI_Init();MPI_File_open();], - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) - AC_MSG_ERROR('unable to link a simple MPI-IO application')) + AC_MSG_CHECKING([whether a simple MPI-IO program can be linked]) + AC_TRY_LINK(, [MPI_Init(); MPI_File_open();], + AC_MSG_RESULT([yes]), + AC_MSG_RESULT([no]) + AC_MSG_ERROR([unable to link a simple MPI-IO application])) dnl There *must* be some way to run in parallel even if it's just the dnl word `none'. if test -z "$RUNPARALLEL"; then - AC_MSG_ERROR(no way to run a parallel program) + AC_MSG_ERROR([no way to run a parallel program]) fi dnl If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with @@ -1946,6 +2151,28 @@ if test -n "$PARALLEL"; then RUNPARALLEL="" fi + if test "X$HDF_FORTRAN" = "Xyes"; then + ADD_PARALLEL_FILES="yes" + AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions]) + + AC_TRY_LINK([#include ], + [MPI_Comm c_comm; MPI_Comm_c2f(c_comm)], + AC_DEFINE([HAVE_MPI_MULTI_LANG_Comm], [1], + [Define if \`MPI_Comm_c2f' and \`MPI_Comm_f2c' exists]) + AC_MSG_RESULT([yes]), + AC_MSG_RESULT([no]) + ) + + AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions]) + AC_TRY_LINK([#include ], + [MPI_Info c_info; MPI_Info_c2f(c_info)], + AC_DEFINE([HAVE_MPI_MULTI_LANG_Info], [1], + [Define if \`MPI_Info_c2f' and \`MPI_Info_f2c' exists]) + AC_MSG_RESULT([yes]), + AC_MSG_RESULT([no]) + ) + fi + dnl ---------------------------------------------------------------------- dnl Block the MPI_Get_count code since it does not work dnl dnl Check whether MPI_Get_count actually works correctly on this @@ -1981,7 +2208,7 @@ dnl ---------------------------------------------------------------------- dnl This must be done after enable-parallel is checked since it depends dnl on a mpich compiler. dnl - AC_SUBST(MPE) MPE=yes + AC_SUBST([MPE]) MPE=yes AC_ARG_WITH([mpe], [AC_HELP_STRING([--with-mpe=DIR], [Use MPE instrumentation [default=no]])],, @@ -2073,7 +2300,8 @@ dnl an example of an internal filter, while the gzip filter is an example of dnl an external filter. Each external filter is controlled with an dnl "--with-foo=" configure flag. dnl -AC_MSG_CHECKING(for I/O filters) +AC_SUBST([FILTERS]) +AC_MSG_CHECKING([for I/O filters]) AC_ARG_ENABLE([filters], [AC_HELP_STRING([--enable-filters=all], [Turn on all internal I/O filters. One may @@ -2082,35 +2310,34 @@ AC_ARG_ENABLE([filters], I/O filters.])], [FILTERS=$enableval]) -AC_SUBST([FILTERS]) dnl Eventually: all_filters="shuffle,foo,bar,baz" all_filters="shuffle,fletcher32" case "X-$FILTERS" in X-|X-all) FILTERS=$all_filters - AC_MSG_RESULT(all ($FILTERS)) + AC_MSG_RESULT([all ($FILTERS)]) ;; X-no|X-none) - AC_MSG_RESULT(none) + AC_MSG_RESULT([none]) FILTERS="none" ;; *) - AC_MSG_RESULT($FILTERS) + AC_MSG_RESULT([$FILTERS]) ;; esac if test -n "$FILTERS"; then for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do -dnl ---------------------------------------------------------------------- -dnl Have to use separate 'if' construct for each filter, so that autoheader -dnl can detect the AC_DEFINE for each one... -dnl + dnl ------------------------------------------------------------------ + dnl Have to use separate 'if' construct for each filter, so that + dnl autoheader can detect the AC_DEFINE for each one... + dnl if test $filter = "SHUFFLE"; then - AC_DEFINE(HAVE_FILTER_SHUFFLE, 1, + AC_DEFINE([HAVE_FILTER_SHUFFLE], [1], [Define if support for shuffle filter is enabled]) fi if test $filter = "FLETCHER32"; then - AC_DEFINE(HAVE_FILTER_FLETCHER32, 1, + AC_DEFINE([HAVE_FILTER_FLETCHER32], [1], [Define if support for Fletcher32 checksum is enabled]) fi done @@ -2121,7 +2348,7 @@ dnl This is defined only when we're using CodeWarrior, since it has a dnl broken "open()" call. dnl if test 1 = 2; then - AC_DEFINE(NO_SHARED_WRITING, 1, + AC_DEFINE([NO_SHARED_WRITING], [1], [Define if shared writing must be disabled (CodeWarrior only)]) fi @@ -2132,22 +2359,22 @@ dnl dnl HDF5 version from the first line of the README.txt file. H5_VERSION="`cut -d' ' -f3 $srcdir/README.txt | head -1`" -AC_SUBST(H5_VERSION) +AC_SUBST([H5_VERSION]) dnl Configuration date -AC_SUBST(CONFIG_DATE) CONFIG_DATE="`date`" +AC_SUBST([CONFIG_DATE]) CONFIG_DATE="`date`" dnl User doing the configuration -AC_SUBST(CONFIG_USER) CONFIG_USER="`whoami`@`hostname`" +AC_SUBST([CONFIG_USER]) CONFIG_USER="`whoami`@`hostname`" if test -n "$ORGANIZATION"; then CONFIG_USER="$CONFIG_USER at $ORGANIZATION" fi dnl Configuration mode (production, development, profile, etc) saved above. -AC_SUBST(CONFIG_MODE) +AC_SUBST([CONFIG_MODE]) dnl Byte sex from the AC_C_BIGENDIAN macro. -AC_SUBST(BYTESEX) +AC_SUBST([BYTESEX]) if test "X$ac_cv_c_bigendian" = "Xyes"; then BYTESEX="big-endian" else @@ -2161,17 +2388,19 @@ dnl might have decided that one or the other is simply not possible. dnl Therefore we have to look in the generated `libtool' shell script for dnl lines that set the value of `build_libtool_libs' (shared) and dnl `build_old_libs' (static). -AC_SUBST(STATIC_SHARED) +AC_SUBST([STATIC_SHARED]) if (grep '^build_libtool_libs=yes' libtool >/dev/null); then enable_shared=yes else enable_shared=no fi + if (grep '^build_old_libs=yes' libtool >/dev/null); then enable_static=yes else enable_static=no fi + if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then STATIC_SHARED="static, shared" elif test "X$enable_static" = "Xyes"; then @@ -2187,7 +2416,7 @@ PARALLEL=${PARALLEL:-no} dnl Compiler with version information. This consists of the full path dnl name of the compiler and the reported version number. -AC_SUBST(CC_VERSION) +AC_SUBST([CC_VERSION]) if `echo $CC | grep / 2>&1 /dev/null`; then CC_VERSION="$CC" else @@ -2214,14 +2443,15 @@ if test -x /bin/pwd; then else pwd=pwd fi -AC_SUBST(ROOT) ROOT="`$pwd`" +AC_SUBST([ROOT]) ROOT="`$pwd`" dnl ---------------------------------------------------------------------- dnl Determine the runtime libraries we may need to include in the dnl libtools command so that executables will find the correct dynamic dnl libraries. dnl -DYNAMIC_DIRS="" +AC_SUBST([DYNAMIC_DIRS]) DYNAMIC_DIRS="" + if test -n "$LDFLAGS"; then for d in $LDFLAGS ; do case "$d" in @@ -2239,7 +2469,6 @@ if test -n "$LDFLAGS"; then esac done fi -AC_SUBST(DYNAMIC_DIRS) if test -n "$CPPFLAGS"; then TEMP_CPPFLAGS="" @@ -2262,11 +2491,11 @@ dnl Build the Makefiles. Almost every Makefile.in will begin with the line dnl `@COMMENCE@' and end with the line `@CONCLUDE@'. These lines insert dnl various files from the config directory into the Makefile. dnl -AC_SUBST_FILE(COMMENCE) COMMENCE=config/commence -AC_SUBST_FILE(CONCLUDE) CONCLUDE=config/conclude +AC_SUBST_FILE([COMMENCE]) COMMENCE=config/commence +AC_SUBST_FILE([CONCLUDE]) CONCLUDE=config/conclude dnl The directory search list -AC_SUBST(SEARCH) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' +AC_SUBST([SEARCH]) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' SEARCH="$SEARCH_RULE`eval $cmd`" export SEARCH @@ -2274,9 +2503,9 @@ export SEARCH dnl We don't need to say when we're entering directories if we're using dnl GNU make becuase make does it for us. if test "X$GMAKE" = "Xyes"; then - AC_SUBST(SETX) SETX=":" + AC_SUBST([SETX]) SETX=":" else - AC_SUBST(SETX) SETX="set -x" + AC_SUBST([SETX]) SETX="set -x" fi dnl Some cleanup stuff @@ -2296,16 +2525,21 @@ saved_no_create=$no_create no_create=yes PARALLEL_MAKE="" +FORTRAN_PARALLEL_MAKE="" if test -n "$TESTPARALLEL"; then PARALLEL_MAKE="$TESTPARALLEL/Makefile $TESTPARALLEL/testph5.sh" + + if test "X$HDF_FORTRAN" = "Xyes"; then + FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile + fi fi PABLO_MAKE="" -AC_SUBST(PARALLEL_PABLO) PARALLEL_PABLO="" +AC_SUBST([PARALLEL_PABLO]) PARALLEL_PABLO="" -if test "$HAVE_PABLO" = "yes"; then +if test "X$HAVE_PABLO" = "Xyes"; then PABLO_MAKE="pablo/Makefile" if test -n "$TESTPARALLEL"; then @@ -2313,6 +2547,25 @@ if test "$HAVE_PABLO" = "yes"; then fi fi +if test "X$HDF_FORTRAN" = "Xyes"; then + FORTRAN_FILES="fortran/Makefile + fortran/src/h5fc + fortran/src/H5fortran_types.f90 + fortran/src/libhdf5_fortran.settings + fortran/src/Makefile + fortran/test/Makefile + $FORTRAN_PARALLEL_MAKE + fortran/examples/Makefile" +fi + +if test "X$HDF_CXX" = "Xyes"; then + CXX_FILES="c++/Makefile + c++/src/Makefile + c++/src/h5c++ + c++/test/Makefile + c++/examples/Makefile" +fi + AC_CONFIG_FILES([src/libhdf5.settings config/depend1 config/depend2 @@ -2350,7 +2603,9 @@ AC_CONFIG_FILES([src/libhdf5.settings doc/html/Tutor/Graphics/Makefile doc/html/Tutor/examples/Makefile doc/html/cpplus/Makefile - doc/html/fortran/Makefile]) + doc/html/fortran/Makefile + $FORTRAN_FILES + $CXX_FILES]) AC_OUTPUT no_create=$saved_no_create @@ -2363,6 +2618,14 @@ test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 chmod 755 tools/misc/h5cc +if test "X$HDF_FORTRAN" = "Xyes"; then + chmod 755 fortran/src/h5fc +fi + +if test "X$HDF_CXX" = "Xyes"; then + chmod 755 c++/src/h5c++ +fi + dnl We don't want inline defined for C++ compilers dnl Don't worry about the C++ ifdef wrappers in the H5pubconf file, since dnl 'H5_inline' isn't a C++ keyword. diff --git a/fortran/Makefile.dist b/fortran/Makefile.dist deleted file mode 100644 index 0b96c81..0000000 --- a/fortran/Makefile.dist +++ /dev/null @@ -1,24 +0,0 @@ -# Top-level distributed Makefile -*- makefile -*- - -# This Makefile is a stub (copied from Makefile.dist) which will run -# configure and then invoke the same target in the new Makefile created -# by configure. - -# Uncomment this variable if your make(1) doesn't set it automatically. -# -#MAKE=make - - -SHELL=/bin/sh - -all lib progs check test _test install uninstall dep depend: _config - $(MAKE) $@ - -clean mostlyclean distclean maintainer-clean TAGS: _config - $(MAKE) $@ - -_config: - sh configure - -.PHONY: all lib progs test install uninstall dep depend clean mostlyclean \ - distclean maintainer-clean _config diff --git a/fortran/aclocal.m4 b/fortran/aclocal.m4 deleted file mode 100644 index 0966dc7..0000000 --- a/fortran/aclocal.m4 +++ /dev/null @@ -1,3528 +0,0 @@ -# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*- - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- - -# serial 46 AC_PROG_LIBTOOL - -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -]) - -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -_LT_AC_PROG_ECHO_BACKSLASH -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_RESTORE]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -_LT_AC_LTCONFIG_HACK - -]) - -# AC_LIBTOOL_HEADER_ASSERT -# ------------------------ -AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], -[AC_CACHE_CHECK([whether $CC supports assert without backlinking], - [lt_cv_func_assert_works], - [case $host in - *-*-solaris*) - if test "$GCC" = yes && test "$with_gnu_ld" != yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) lt_cv_func_assert_works=no ;; - *) lt_cv_func_assert_works=yes ;; - esac - fi - ;; - esac]) - -if test "x$lt_cv_func_assert_works" = xyes; then - AC_CHECK_HEADERS(assert.h) -fi -])# AC_LIBTOOL_HEADER_ASSERT - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h) -])# _LT_AC_CHECK_DLFCN - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if AC_TRY_EVAL(ac_link) && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AC_FD_CC - fi - else - echo "cannot find nm_test_var in $nlist" >&AC_FD_CC - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC - fi - else - echo "$progname: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - -# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR -# --------------------------------- -AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], -[# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi -])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[if test "$cross_compiling" = yes; then : - [$4] -else - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - -AC_DEFUN([_LT_AC_LTCONFIG_HACK], -[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" - -AC_MSG_CHECKING([for objdir]) -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -AC_MSG_RESULT($objdir) - - -AC_ARG_WITH(pic, -[ --with-pic try to use only PIC/non-PIC objects [default=use both]], -pic_mode="$withval", pic_mode=default) -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -AC_MSG_CHECKING([for $compiler option to produce PIC]) -AC_CACHE_VAL(lt_cv_prog_cc_pic, -[ lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - #################################################################### - ## HACK Alert! This is causing problems with C++ on SP3...We'll just - ## remove this...THERE! All better now. - #################################################################### - ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - : - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - if test "x$host_vendor" = xsni; then - lt_cv_prog_cc_wl='-LD' - else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi -]) -if test -z "$lt_cv_prog_cc_pic"; then - AC_MSG_RESULT([none]) -else - AC_MSG_RESULT([$lt_cv_prog_cc_pic]) - - # Check to make sure the pic_flag actually works. - AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) - AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - AC_TRY_COMPILE([], [], [dnl - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - ], [dnl - lt_cv_prog_cc_pic_works=no - ]) - CFLAGS="$save_CFLAGS" - ]) - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) - lt_cv_prog_cc_can_build_shared=no - fi -fi - -AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) -AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) - LDFLAGS="$save_LDFLAGS" -]) - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) -AC_CACHE_VAL([lt_cv_compiler_c_o], [ -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&AC_FD_CC - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null -]) -compiler_c_o=$lt_cv_compiler_c_o -AC_MSG_RESULT([$compiler_c_o]) - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) - AC_CACHE_VAL([lt_cv_compiler_o_lo], [ - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - ]) - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - ]) - compiler_o_lo=$lt_cv_compiler_o_lo - AC_MSG_RESULT([$compiler_o_lo]) -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - AC_TRY_COMPILE([], [int some_variable = 0;], [dnl - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - ]) - CFLAGS="$save_CFLAGS" - AC_MSG_RESULT([$compiler_rtti_exceptions]) - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - ####################################################################### - # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue. - # The ``-b nolibpath -b ...'' flags were messing with the mpicc - # compiler's already defined library paths and it wasn't able to find - # the libraries it needed to run....DOH! - hname="`hostname`" - - case "$hname" in - *pacific.llnl.gov* | *s0*) - hardcode_libdir_flag_spec=' ' - ;; - *) - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - ;; - esac - # - # End MAJOR HACK - # - ####################################################################### - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [[12]].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -AC_MSG_RESULT([$ld_shlibs]) -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -AC_MSG_CHECKING([how to hardcode library paths into programs]) -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -AC_MSG_RESULT([$hardcode_action]) - -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -AC_LIBTOOL_DLOPEN_SELF - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], - [$rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile); then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi]) - AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - -])# _LT_AC_LTCONFIG_HACK - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_LIBTOOL_PICMODE - implement the --with-pic flag -# Usage: AC_LIBTOOL_PICMODE[(MODE)] -# Where MODE is either `yes' or `no'. If omitted, it defaults to -# `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default)]) - - -# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -]) - - -# AC_PATH_MAGIC - find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl -AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) - else - MAGIC_CMD=: - fi -fi -]) - - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | [[A-Za-z]]:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -# AC_PROG_LD_GNU - -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -]) - -# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, -[lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" -]) - -# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[[78]]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -]) - - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl -AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - diff --git a/fortran/acsite.m4 b/fortran/acsite.m4 deleted file mode 100644 index 46f69f9..0000000 --- a/fortran/acsite.m4 +++ /dev/null @@ -1,504 +0,0 @@ -dnl ------------------------------------------------------------------------- -dnl ------------------------------------------------------------------------- -dnl -dnl Copyright by the Board of Trustees of the University of Illinois. -dnl All rights reserved. -dnl -dnl This file is part of HDF5. The full HDF5 copyright notice, including -dnl terms governing use, modification, and redistribution, is contained in -dnl the files COPYING and Copyright.html. COPYING can be found at the root -dnl of the source code distribution tree; Copyright.html can be found at the -dnl root level of an installed copy of the electronic HDF5 document set and -dnl is linked from the top-level documents page. It can also be found at -dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -dnl -dnl Macros for HDF5 Fortran -dnl -dnl ------------------------------------------------------------------------- -dnl ------------------------------------------------------------------------- - -dnl ------------------------------------------------------------------------- -dnl AC_PROG_F9X -dnl -dnl Check for a Fortran 9X compiler. -dnl -AC_DEFUN(AC_PROG_F9X, -[AC_CHECK_PROGS(F9X, f90 pgf90 xlf90 f95 g95 xlf95) -test -z "$F9X" && AC_MSG_ERROR([no acceptable f9X compiler found in \$PATH]) - -AC_PROG_F9X_WORKS -AC_PROG_F9X_GNU - -if test $ac_cv_prog_g9x = yes; then - G9X=yes - dnl Check whether -g works, even if FFLAGS is set, in case the package - dnl plays around with FFLAGS (such as to build both debugging and - dnl normal versions of a library), tasteless as that idea is. - ac_test_FFLAGS="${FFLAGS+set}" - ac_save_FFLAGS="$FFLAGS" - FFLAGS= - AC_PROG_F9X_G - if test "$ac_test_FFLAGS" = set; then - FFLAGS="$ac_save_FFLAGS" - elif test $ac_cv_prog_f9x_g = yes; then - FFLAGS="-g -O2" - else - FFLAGS="-O2" - fi -else - G9X= - test "${FFLAGS+set}" = set || FFLAGS="-g" -fi -]) - -dnl ------------------------------------------------------------------------- -dnl AC_TRY_F9X_COMPILER() -dnl -dnl It would be nice if the compiler actually works. -dnl -AC_DEFUN(AC_TRY_F9X_COMPILER, [ -cat > conftest.$ac_ext << EOF -[$1] -EOF -if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - [$2]=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - [$3]=no - else - [$3]=yes - fi -else - echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&AS_MESSAGE_LOG_FD - [$2]=no -fi -rm -fr conftest* -]) - -dnl ------------------------------------------------------------------------- -dnl AC_LANG_FORTRAN9X() -dnl -dnl Generic macro to setup the Fortran 9X specific env variables. -dnl -m4_define([AC_LANG(FORTRAN9X)], -[ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&AS_MESSAGE_LOG_FD' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&AS_MESSAGE_LOG_FD' -cross_compiling=$ac_cv_prog_f9x_cross -]) - -AU_DEFUN([AC_LANG_FORTRAN9X], [AC_LANG(FORTRAN9X)]) - -dnl ------------------------------------------------------------------------- -dnl AC_LANG_F9X_WORKS() -dnl -dnl It would be nice if the compiler actually works. -dnl -AC_DEFUN(AC_PROG_F9X_WORKS, [ -AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works]) -AC_LANG_SAVE -AC_LANG_FORTRAN9X -AC_TRY_F9X_COMPILER([ - program conftest - end -], ac_cv_prog_f9x_works, ac_cv_prog_f9x_cross) -AC_LANG_RESTORE -AC_MSG_RESULT($ac_cv_prog_f9x_works) -if test $ac_cv_prog_f9x_works = no; then - AC_MSG_ERROR([installation or configuration problem: Fortran 9X compiler cannot create executables.]) -fi -AC_MSG_CHECKING([whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler]) -AC_MSG_RESULT($ac_cv_prog_f9x_cross) -cross_compiling=$ac_cv_prog_f9x_cross -]) - -dnl ------------------------------------------------------------------------- -dnl AC_PROG_F9X_GNU -dnl -dnl Test whether for Fortran 9X compiler is `g95' (the GNU Fortran 95 -dnl Compiler). This test depends on whether the Fortran 9X compiler -dnl can do CPP pre-processing. -dnl -AC_DEFUN(AC_PROG_F9X_GNU, -[AC_CACHE_CHECK(whether we are using GNU Fortran 95, ac_cv_prog_g9x, -[cat > conftest.fpp </dev/null 2>&1; then - ac_cv_prog_g9x=yes -else - ac_cv_prog_g9x=no -fi])]) - -dnl ------------------------------------------------------------------------- -dnl AC_PROG_F9X_G -dnl -dnl Test whether the Fortran 9X compiler can accept the `-g' option -dnl to enable debugging. -dnl -AC_DEFUN(AC_PROG_F9X_G, -[AC_CACHE_CHECK(whether $F9X accepts -g, ac_cv_prog_f9x_g, -[cat > conftest.f << EOF - program conftest - end -EOF -if test -z "`$F9X -g -c conftest.f 2>&1`"; then - ac_cv_prog_f9x_g=yes -else - ac_cv_prog_f9x_g=no -fi -rm -f conftest* -])]) - -dnl ------------------------------------------------------------------------- -dnl AC_F9X_OPT_FLAGS() -dnl -dnl Check for optimizer flags the Fortran compiler can use. -dnl -AC_DEFUN(AC_F9X_OPT_FLAGS, -[AC_MSG_CHECKING([for $F9X optimizer flags]) -AC_LANG_SAVE -AC_LANG_FORTRAN9X - -for flags in "-fast" "-O3" "-O" "";do - cat > conftest.$ac_ext < /dev/null 2>&1; then :; else - FFLAGS="$FFLAGS $flags" - break - fi - fi -done - -if test -n "$flags"; then - echo "$flags" 1>&6 -else - echo "none" 1>&6 -fi -rm -f conftest* -]) - -dnl ------------------------------------------------------------------------- -dnl AC_F9X_MODS() -dnl -dnl Check how F9X handles modules. This macro also checks which -dnl command-line option to use to include the module once it's built. -dnl -AC_DEFUN(AC_F9X_MODS, -[AC_MSG_CHECKING(what $F9X does with modules) -AC_LANG_SAVE -AC_LANG_FORTRAN9X - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&1 -if test "$modfiles" = file.o; then - echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6 - OLD_FFLAGS=$FFLAGS - FFLAGS="$FFLAGS -em" - eval $ac_compile - modfiles="" - for f in file.o module.mod MODULE.mod module.M MODULE.M; do - test -f $f && modfiles="$f" - done - if test "$modfiles" = "file.o"; then - FFLAGS=$OLD_FFLAGS - echo no 6>&1 - else - echo yes 6>&1 - fi -fi -cd .. - -AC_MSG_CHECKING(how $F9X finds modules) - -for flag in "-I" "-M" "-p"; do - cat >conftest.$ac_ext <&6 - FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS" -else - echo unknown 1>&6 -fi -AC_SUBST(F9XMODFLAG) -AC_SUBST(F9XMODEXT) -rm -rf conftest* -]) - -dnl ------------------------------------------------------------------------- -dnl AC_TRY_FCOMPILE() -dnl -dnl Check if we can compile a simple Fortran 90 program. -dnl -dnl AC_TRY_FCOMPILE(FUNCTION-BODY, -dnl [ACTION-IF-SUCCESS], [ACTION-IF-NOT-SUCCESS]) -dnl -AC_DEFUN([AC_TRY_FCOMPILE], -[AC_LANG_SAVE -AC_LANG_FORTRAN9X - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <conftest.$ac_ext <conftest.$ac_ext <&6 -dnl cat >conftest.f90 <<'EOF' -dnl program conftest -dnl if (selected_real_kind(12) .eq. kind(0.0)) then -dnl print '(a)','YES' -dnl else -dnl print '(a)','NO' -dnl end if -dnl end program conftest -dnl EOF -dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 -dnl if test "`./conftest | head -1`" = YES; then -dnl echo "yes" 1>&6 -dnl AC_DEFINE(HIPREC) -dnl else -dnl echo "no" 1>&6 -dnl fi - -dnl echo $ac_n "checking whether f90 precision of default real type""... $ac_c" 1>&6 -dnl cat >conftest.f90 <<'EOF' -dnl program conftest -dnl if (kind(0.0) .eq. selected_real_kind(12) .or.& -dnl &kind(0.0) .eq. selected_real_kind(6) ) then -dnl print '(a)','YES' -dnl else -dnl print '(a)','NO' -dnl end if -dnl end program conftest -dnl EOF -dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 -dnl if test "`./conftest | head -1`" = YES; then -dnl echo "OK" 1>&6 -dnl AC_DEFINE(REALOK) -dnl else -dnl echo "no" 1>&6 -dnl fi - -dnl echo $ac_n "checking accuracy of arithmetic""... $ac_c" 1>&6 -dnl cat >conftest.f90 <<'EOF' -dnl program conftest -dnl integer, parameter :: double=selected_real_kind(12) -dnl real(double), parameter :: ulp=2.0_double**(-47) -dnl real(double), parameter :: ans=0.92699498904359955986_double -dnl real(double) :: x,y,z -dnl integer i -dnl x=0.0_double -dnl y=ulp -dnl do i=2,100 -dnl z=x+y -dnl x=y -dnl y=z-int(z) -dnl end do -dnl if (y-ans .lt. ulp/2.0_double) then -dnl print '(a)','YES' -dnl else -dnl print '(a)','NO' -dnl end if -dnl end program conftest -dnl EOF -dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 -dnl if test "`./conftest | head -1`" = YES; then -dnl echo "OK" 1>&6 -dnl AC_DEFINE(ARITHOK) -dnl else -dnl echo "no" 1>&6 -dnl fi - -dnl echo $ac_n "checking whether int is the fastest way to truncate""... $ac_c" 1>&6 -dnl cat >conftest.f90 <<'EOF' -dnl program conftest -dnl integer, parameter :: double=selected_real_kind(12) -dnl real(double), parameter :: ulp=2.0_double**(-47) -dnl real(double) :: x,y,z,ya,yb -dnl integer :: t0,t1,i,timea,timeb -dnl -dnl x=0.0_double -dnl y=ulp -dnl call system_clock(t0) -dnl do i=2,1000000 -dnl z=x+y -dnl x=y -dnl y=z-int(z) -dnl end do -dnl ya=y -dnl call system_clock(t1) -dnl timea=t1-t0 -dnl -dnl x=0.0_double -dnl y=ulp -dnl call system_clock(t0) -dnl do i=2,1000000 -dnl z=x+y -dnl x=y -dnl if (z.ge.1.0_double) then -dnl y=z-1.0_double -dnl else -dnl y=z -dnl end if -dnl end do -dnl yb=y -dnl call system_clock(t1) -dnl timeb=t1-t0 -dnl -dnl if (timea.lt.timeb) then -dnl print '(a)','YES' -dnl else -dnl print '(a)','NO' -dnl end if -dnl print *,ya,yb -dnl end program conftest -dnl EOF -dnl $ac_cv_prog_F90 $FFLAGS -o conftest conftest.f90 > /dev/null 2>&1 -dnl if test "`./conftest | head -1`" = YES; then -dnl echo "yes" 1>&6 -dnl AC_DEFINE(USEINT) -dnl else -dnl echo "no" 1>&6 -dnl fi -dnl -dnl ------------------------------------------------------------------------- -dnl ------------------------------------------------------------------------- diff --git a/fortran/config/BlankForm b/fortran/config/BlankForm deleted file mode 100644 index 83b6ef5..0000000 --- a/fortran/config/BlankForm +++ /dev/null @@ -1,126 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC="/some/default/compiler/named/foo -ansi" - CC_BASENAME=foo -fi - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} diff --git a/fortran/config/commence.in b/fortran/config/commence.in deleted file mode 100644 index b3d4f6e..0000000 --- a/fortran/config/commence.in +++ /dev/null @@ -1,170 +0,0 @@ -##------------------------------------------------------------ -*- makefile -*- -## The following section of this makefile comes from the -## `./config/commence' file which was generated with config.status -## from `./config/commence.in'. -##----------------------------------------------------------------------------- - -## Things that Make needs -.SUFFIXES: -.SUFFIXES: .c .f90 .o .lo -@SET_MAKE@ - -## Directories to search -@SEARCH@ - -## Programs -SHELL=/bin/sh -CC=@CC@ -F9X=@F9X@ -F9XMODEXT=@F9XMODEXT@ -F9XMODFLAG=@F9XMODFLAG@ -FSEARCH_DIRS=@FSEARCH_DIRS@ -CFLAGS=@CFLAGS@ -CPPFLAGS=@CPPFLAGS@ -FFLAGS=@FFLAGS@ -LDFLAGS=@LDFLAGS@ -ROOT=@ROOT@ -LIBS=@LIBS@ -AR=@AR@ -RANLIB=@RANLIB@ -PERL=@PERL@ -RM=rm -f -CP=cp -INSTALL=@INSTALL@ -INSTALL_PROGRAM=@INSTALL_PROGRAM@ -INSTALL_DATA=@INSTALL_DATA@ -PARALLEL=@PARALLEL@ -RUNSERIAL=@RUNSERIAL@ -RUNPARALLEL=@RUNPARALLEL@ -RUNTEST=$(RUNSERIAL) -TRACE=: - -## Installation points -prefix=@prefix@ -exec_prefix=@exec_prefix@ -bindir=@bindir@ -libdir=@libdir@ -includedir=@includedir@ -docdir=@exec_prefix@/doc -PUB_LIB=$(LIB) - -## Shared libraries -LT_STATIC_EXEC=@LT_STATIC_EXEC@ -DYNAMIC_DIRS=@DYNAMIC_DIRS@ -LT=$(top_builddir)/libtool -LT_CCOMPILE=$(LT) --mode=compile $(CC) -LT_LINK_CLIB=$(LT) --mode=link $(CC) $(DYNAMIC_DIRS) $(LT_STATIC_EXEC) -rpath $(libdir) -LT_LINK_CEXE=$(LT) --mode=link $(CC) $(DYNAMIC_DIRS) -rpath $(bindir) -LT_RUN=$(LT) --mode=execute -LT_INSTALL_PROG=$(LT) --mode=install $(INSTALL_PROGRAM) -LT_INSTALL_LIB=$(LT) --mode=install $(INSTALL_DATA) -LT_UNINSTALL=$(LT) --mode=uninstall $(RM) - -# Fortran compilation/linking stuff -LT_FCOMPILE=$(LT) --mode=compile $(F9X) -LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static $(DYNAMIC_DIRS) -LT_LINK_FEXE=$(LT) --mode=link $(F9X) $(LT_STATIC_EXEC) $(DYNAMIC_DIRS) - -## Optional variables. We must declare them here because Irix pmake -## complains if it sees a reference to a variable which has never been -## defined. The main makefile is free to redefine these to something else. -DOCDIR=$(docdir) -EXAMPLEDIR=$(docdir)/hdf5/examples/fortran -LIB= -LIB_SRC= -LIB_OBJ= -PUB_HDR= -PUB_PROGS= -PROGS= -TEST_PROGS= -TEST_FLAGS= -TEST_SCRIPTS= -AUX_LIB= -EXAMPLE_PROGS= -SUBDIRS= -LIBHDF5= - -## The default is to build the library and/or programs. We must build -## them sequentially. -all: - $(MAKE) lib - $(MAKE) progs - $(MAKE) tests - -## The following rules insure that the Makefile is up-to-date by rerunning -## various autoconf components (although not all versions of make assume -## that the makefile is implicitly a target). We use time stamp files to -## keep track of the most recent update of H5config.h.in and H5config.h -## because autoheader and config.status don't update the modification time -## if the contents don't change. -## Invoke it by "gmake reconfigure". -## -## Graphically, the dependencies are: -## -## configure.in -## | | -## +-----------------+ +------------+ -## | | -## stamp1 configure -## (H5config.h.in) | -## | | | -## | +---------------+ +-----------+ -## | | | -## | config.status -## | | -## | +------------------+ -## | | -## stamp2 -## (H5config.h) Makefile.in et al -## | | -## +------------------+ +-----------+ -## | | -## Makefile -## -## A side effect of updating stamp1 is to generate H5config.h.in and a -## side effect of updating stamp2 is to generate H5config.h. When using -## a version of make that doesn't treat the makefile as the initial target -## the user may want to occassionally type `make Makefile' in any source -## directory. -## The `Makefile' target has been renamed to `reconfigure' so that the -## autoconf and make depend processes do not start up automatically. -## One must do `make reconfigure' explicitedly to start the process. -## (When srcdir is used and if more than one machines are running, -## this automatic Makefile/autoconf can get things unstable.) -## -STAMP1=$(top_builddir)/config/stamp1 -STAMP2=$(top_builddir)/config/stamp2 - -MAKEFILE_PARTS=$(srcdir)/Makefile.in \ - $(top_srcdir)/config/commence.in \ - $(top_srcdir)/config/conclude.in \ - $(top_srcdir)/config/depend1.in \ - $(top_srcdir)/config/depend2.in \ - $(top_srcdir)/config/depend3.in \ - $(top_srcdir)/config/depend4.in \ - $(top_srcdir)/config/dependN.in - -$(STAMP1): $(top_srcdir)/configure.in - touch $(STAMP1) - -cd $(top_srcdir); autoheader - -$(STAMP2): $(STAMP1) $(top_builddir)/config.status - touch $(STAMP2) - -cd $(top_builddir); \ - CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status - -$(top_srcdir)/configure: $(top_srcdir)/configure.in - -cd $(top_srcdir); autoconf - -$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) - -cd $(top_builddir); ./config.status --recheck - -# rerun the autoconf process if any configure components have changed. -reconfigure: $(MAKEFILE_PARTS) $(STAMP2) - -cd $(top_builddir); CONFIG_HEADERS= ./config.status - -##----------------------------------------------------------------------------- -## The following section of this makefile comes from the middle of -## `Makefile.in' from this directory. It was generated by running -## `config.status'. -##----------------------------------------------------------------------------- diff --git a/fortran/config/conclude.in b/fortran/config/conclude.in deleted file mode 100644 index 09cdf52..0000000 --- a/fortran/config/conclude.in +++ /dev/null @@ -1,189 +0,0 @@ -##------------------------------------------------------------ -*- makefile -*- -## The following section of this makefile comes from the -## `./config/conclude' file which was generated with config.status -## from `./config/conclude.in'. -##----------------------------------------------------------------------------- - -## This is the target for the library described in the main body of the -## makefile. -## -lib: $(LIB) -$(LIB) __no_library__: $(LIB_OBJ) - @$(LT_LINK_FLIB) -o $@ $(FFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS) - -progs: $(LIB) $(PROGS) - -## Build a tags file in this directory. -TAGS: $(LIB_SRC) - $(RM) $@ - -etags $(LIB_SRC) - -## Runs each test in order, passing $(TEST_FLAGS) to the program. -tests: $(TEST_PROGS) $(LIB) -check test _test: tests - @for test in $(TEST_PROGS) dummy; do \ - if test $$test != dummy; then \ - echo "============================"; \ - echo "Testing $$test $(TEST_FLAGS)"; \ - echo "============================"; \ - srcdir="$(srcdir)" \ - $(RUNTEST) ./$$test $(TEST_FLAGS) || \ - exit 1; \ - echo ""; \ - fi; \ - done; - @for test in $(TEST_SCRIPTS) dummy; do \ - if test $$test != dummy; then \ - echo "============================"; \ - echo "Testing $$test $(TEST_FLAGS)"; \ - echo "============================"; \ - RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ - srcdir="$(srcdir)" \ - /bin/sh $$test $(TEST_FLAGS) || \ - exit 1; \ - echo ""; \ - fi; \ - done; - -## Make installation directories directories if they don't exist. -$(libdir): - $(top_srcdir)/bin/mkdirs $@ - -$(includedir): - $(top_srcdir)/bin/mkdirs $@ - -$(bindir): - $(top_srcdir)/bin/mkdirs $@ - -$(DOCDIR): - $(top_srcdir)/bin/mkdirs $@ - -$(EXAMPLEDIR): - $(top_srcdir)/bin/mkdirs $@ - -## Install the library, the public header files, and public programs. -install: $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir) - @for f in X $(PUB_LIB); do \ - if test $$f != X; then \ - (cd .libs && rm -f $(PUB_LIB)i && ln -s ../$(PUB_LIB) $(PUB_LIB)i); \ - ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1); \ - fi; \ - done - @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ - if test -f "hdf5.$(F9XMODEXT)" || test -f "HDF5.$(F9XMODEXT)"; then \ - ((cp *.$(F9XMODEXT) $(libdir)/. && chmod 644 $(libdir)/*.$(F9XMODEXT)) || exit 1); \ - fi; \ - fi - @if test -f libhdf5_fortran.settings; then \ - (set -x; $(INSTALL_DATA) libhdf5_fortran.settings $(libdir)/. || exit 1); \ - fi - @for f in X $(PUB_HDR); do \ - if test $$f != X; then \ - if test -f $$f; then \ - (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1); \ - else \ - (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. || \ - exit 1); \ - fi; \ - fi; \ - done - @for f in X $(PUB_PROGS); do \ - if test $$f != X; then \ - ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1); \ - fi; \ - done - -install-examples: $(EXAMPLE_PROGS) $(EXAMPLEDIR) - @for f in X $(EXAMPLE_PROGS); do \ - if test $$f != X; then \ - (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(EXAMPLEDIR)/. || exit 1);\ - fi; \ - done - -uninstall-examples: - @if test -n "$(EXAMPLE_PROGS)"; then \ - set -x; cd $(EXAMPLEDIR) && $(RM) $(EXAMPLE_PROGS); \ - fi - -## Removes those things that `make install' (would have) installed. -uninstall: - @for f in libhdf5_fortran.settings $(LIB); do \ - $(LT_UNINSTALL) $(libdir)/$$f; \ - done - @if test -n "$(PUB_HDR)"; then \ - set -x; cd $(includedir) && $(RM) $(PUB_HDR); \ - fi - @if test -n "$(F9XMODEXT)" -a "X$(F9XMODEXT)" != "Xo"; then \ - if test -f "$(libdir)/hdf5.$(F9XMODEXT)" -o -f "$(libdir)/HDF5.$(F9XMODEXT)"; then \ - set -x; $(RM) $(libdir)/*.$(F9XMODEXT); \ - fi; \ - fi - @for f in X $(PUB_PROGS); do \ - if test $$f != X; then \ - $(LT_UNINSTALL) $(bindir)/$$f; \ - fi; \ - done - -## Removes temporary files without removing the final target files. That is, -## remove things like object files but not libraries or executables. -## -mostlyclean: - @if test -n "$(LIB_OBJ)"; then \ - $(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o); \ - fi - @if test -n "$(TEST_OBJ)"; then \ - $(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o); \ - fi - @if test -n "$(PROG_OBJ)" || test -n "$(MOSTLYCLEAN)"; then \ - $(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN); \ - fi - -## Like `mostlyclean' except it also removes the final targets: things like -## libraries and executables. This target doesn't remove any file that -## is part of the HDF5 distribution. -## -clean: mostlyclean - @if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \ - $(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN); \ - fi - -$(RM) *.M *.a *.mod - -$(RM) -r .libs - -## Like `clean' except it also removes files that were created by running -## configure. If you've unpacked the source and built HDF5 without creating -## any other files, then `make distclean' will leave only the files that were -## in the distribution. -## -distclean: clean - -$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN) - @if test -f $(srcdir)/Makefile.in; then \ - (set -x; $(RM) Makefile); \ - fi - -## Like `distclean' except it deletes all files that can be regenerated from -## the makefile, including those generated from autoheader and autoconf. -## -maintainer-clean: distclean - -$(RM) *~ core core.* *.core *.bak *.contrib gmon.out - -## Implicit rules -.c.o: - $(CC) $(CFLAGS) $(CPPFLAGS) -c $< - -.c.lo: - @$(LT_CCOMPILE) $(CFLAGS) $(CPPFLAGS) -c $< - -.f90.o: - $(F9X) $(FFLAGS) $(FSEARCH_DIRS) -c $< - -.f90.lo: - @$(LT_FCOMPILE) $(FFLAGS) $(FSEARCH_DIRS) -c $< - -##----------------------------------------------------------------------------- -## The following section of this makefile contains dependencies between the -## source files and the header files. -##----------------------------------------------------------------------------- -.PHONY: dep depend -dep depend: $(srcdir)/Dependencies - -@DEPEND@ diff --git a/fortran/config/dec-flags b/fortran/config/dec-flags deleted file mode 100644 index 9af2aae..0000000 --- a/fortran/config/dec-flags +++ /dev/null @@ -1,94 +0,0 @@ -# -*- shell-script -*- -# -# This file should be sourced into configure if the compiler is a DEC -# compiler. It is careful not to do anything if the compiler is not -# DEC; otherwise `cc_flags_set' is set to `yes' -# - -# Get the compiler version unless it's already known. -# -# cc_vendor: The compiler vendor: DEC -# cc_version: Version number, like: V5.2-038 -# -if test X = "X$cc_flags_set"; then - cc_vendor=DEC - cc_version="`$CC $CFLAGS -V 2>&1 |head -1 |\ - sed 's/.*DEC C \(V[0-9][-\.0-9]*\).*/\1/'`" - if test X != "$gcc_version"; then - echo "compiler '$CC' is $cc_vendor-$cc_version" - else - cc_vendor= - fi -fi - -# Warn about old compilers that don't work right. -case "$cc_vendor-$cc_version" in - DEC-V5.2-038) - cat <$@; \ - echo '## Only temporary changes may be made here.' >>$@; \ - echo >>$@; \ - $(PERL) -p $(top_srcdir)/bin/distdep .depend >>$@; \ - else \ - echo 'Dependencies cannot be built when $$srcdir == $$builddir'; \ - fi - -.depend: $(LIB_SRC) $(TEST_SRC) $(PROG_SRC) - @touch .depend - @for dep in $? dummy; do \ - if test $$dep != "dummy" -a -n "$(PERL)"; then \ - case "$$dep" in \ - *.c) \ - echo Building dependencies for $$dep; \ - obj=`basename $$dep .c`.lo; \ - sed '\%^'"$$obj"':%,\%[^\\]$$%d' <$@ >$@- && mv $@- $@; \ - $(TRACE) $$dep; \ - $(CC) -MM -MG $(CPPFLAGS) $$dep 2>/dev/null >>$@; \ - $(PERL) -w $(top_srcdir)/bin/dependencies --srcdir=$(srcdir) --top_srcdir=$(top_srcdir) --top_builddir=$(top_builddir) $@; \ - ;; \ - esac; \ - fi; \ - done - --include .depend - diff --git a/fortran/config/depend2.in b/fortran/config/depend2.in deleted file mode 100644 index f67914f..0000000 --- a/fortran/config/depend2.in +++ /dev/null @@ -1,11 +0,0 @@ -## -*- makefile -*- - -## This platform doesn't support automatic dependencies because we're -## not using GNU gcc. GNU gcc is needed in order to generate the list -## of header files included by a source file. - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - --include $(srcdir)/Dependencies diff --git a/fortran/config/depend3.in b/fortran/config/depend3.in deleted file mode 100644 index e856bc5..0000000 --- a/fortran/config/depend3.in +++ /dev/null @@ -1,7 +0,0 @@ -## -*- makefile -*- - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - -.include <$(srcdir)/Dependencies> diff --git a/fortran/config/depend4.in b/fortran/config/depend4.in deleted file mode 100644 index b0324d9..0000000 --- a/fortran/config/depend4.in +++ /dev/null @@ -1,7 +0,0 @@ -## -*- makefile -*- - -## Since automatic dependencies are not being used, we attempt to include the -## `.distdep' file from the source tree. This file was automatically generated -## on some system that satisfies the above requirements. - -include $(srcdir)/Dependencies diff --git a/fortran/config/dependN.in b/fortran/config/dependN.in deleted file mode 100644 index 7ece270..0000000 --- a/fortran/config/dependN.in +++ /dev/null @@ -1,4 +0,0 @@ -## -*- makefile -*- - -## Automatic dependencies are not being used and we cannot include other -## files. diff --git a/fortran/config/freebsd b/fortran/config/freebsd deleted file mode 100644 index 8608a85..0000000 --- a/fortran/config/freebsd +++ /dev/null @@ -1,21 +0,0 @@ -# -*- shell-script -*- -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# The default compiler is `gcc' -if test "X-" = "X-$CC"; then - CC=gcc - CC_BASENAME=gcc -fi - -# Architecture-specific flags -ARCH= - -# Omit frame pointer for optimized code? -NOFP=${NOFP:=-fomit-frame-pointer} - -# Figure out compiler flags -. $srcdir/config/gnu-flags diff --git a/fortran/config/gnu-flags b/fortran/config/gnu-flags deleted file mode 100644 index a14d70e..0000000 --- a/fortran/config/gnu-flags +++ /dev/null @@ -1,227 +0,0 @@ -# -*- shell-script -*- -# -# This file should be sourced into configure if the compiler is the -# GNU gcc compiler or a derivative. It is careful not to do anything -# if the compiler is not GNU; otherwise `cc_flags_set' is set to `yes' -# - -# Get the compiler version in a way that works for gcc, egcs, and -# pgcc unless a compiler version is already known -# -# cc_vendor: The compiler name: gcc, egcs, or pgcc -# cc_version: Version number: 2.91.60, 2.7.2.1 -# -if test X = "X$cc_flags_set"; then - cc_version="`$CC $CFLAGS -v 2>&1 |grep 'gcc version' |\ - sed 's/.*gcc version \([-a-z0-9\.]*\).*/\1/'`" - cc_vendor=`echo $cc_version |sed 's/\([a-z]*\).*/\1/'` - cc_version=`echo $cc_version |sed 's/[-a-z]//g'` - if test X = "X$cc_vendor" -a X != "X$cc_version"; then - cc_vendor=gcc - fi - if test "-" != "$cc_vendor-$cc_version"; then - echo "compiler '$CC' is GNU $cc_vendor-$cc_version" - fi - - # Some version numbers - cc_vers_major=`echo $cc_version | cut -f1 -d.` - cc_vers_minor=`echo $cc_version | cut -f2 -d.` - cc_vers_patch=`echo $cc_version | cut -f3 -d.` - test -n "$cc_vers_major" || cc_vers_major=0 - test -n "$cc_vers_minor" || cc_vers_minor=0 - test -n "$cc_vers_patch" || cc_vers_patch=0 - cc_vers_all=`expr $cc_vers_major '*' 1000000 + $cc_vers_minor '*' 1000 + $cc_vers_patch` -fi - -# GCC compilers before gcc-2.8.1 have problems with `long long'. -if test gcc = "$cc_vendor" -a "$cc_vers_all" -lt 2008001; then - cat <&1 |head -1`" in - "Mongoose Compilers: Version 7.00") - echo " +---------------------------------------------------+" - echo " | You have an old version of cc (Mongoose Compilers |" - echo " | version 7.00). Please upgrade to MIPSpro version |" - echo " | 7.2.1.2m (patches are available from the SGI web |" - echo " | site). The 7.00 version may generate incorrect |" - echo " | code, especially when optimizations are enabled. |" - echo " +---------------------------------------------------+" - sleep 5 - ;; - esac - - # Do *not* use -ansi because it prevents hdf5 from being able - # to read modification dates from the file. On some systems it - # can also result in compile errors in system header files - # since hdf5 includes a couple non-ANSI header files. - #CFLAGS="$CFLAGS -ansi" - - # Always turn off these compiler warnings for the -64 compiler: - # 1174: function declared but not used - # 1196: __vfork() (this is an SGI config problem) - # 1209: constant expressions - # 1429: the `long long' type is not standard - # 1685: turn off warnings about turning off invalid warnings - # 3201: remark - parameter not referenced - CFLAGS="$CFLAGS -woff 1174,1429,1209,1196,1685,3201" - - # Always turn off these compiler warnings for the old compiler: - # 799: the `long long' type is not standard - # 803: turn off warnings about turning off invalid warnings - # 835: __vfork() (this is an SGI config problem) - CFLAGS="$CFLAGS -woff 799,803,835" - - # Always turn off these loader warnings: - # (notice the peculiar syntax) - # 47: branch instructions that degrade performance on R4000 - # 84: a library is not used - # 85: duplicate definition preemption (from -lnsl) - # 134: duplicate weak definition preemption (from -lnsl) - CFLAGS="$CFLAGS -Wl,-woff,47,-woff,84,-woff,85,-woff,134" - - # Extra debugging flags - DEBUG_CFLAGS="-g -fullwarn" - DEBUG_CPPFLAGS= - - # Extra production flags - PROD_CFLAGS="-64 -mips4 -O -s" - PROD_CPPFLAGS= - - # Extra profiling flags - PROFILE_CFLAGS=-pg - PROFILE_CPPFLAGS= - ;; -esac - -# Use SGI supplied C compiler by default. There is no ranlib -if test "X-" = "X-$F9X"; then - F9X="f90" - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-64 -mips4 -O -s" - DEBUG_FFLAGS="-64 -mips4 -O -s" - PROD_FFLAGS="-64 -mips4 -O -s" - PROFILE_FFLAGS="-64 -mips4 -O -s" -fi - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the IRIX architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-64 -mips4 -O -s" - DEBUG_FFLAGS="-64 -mips4 -O -s" - PROD_FFLAGS="-64 -mips4 -O -s" - PROFILE_FFLAGS="-64 -mips4 -O -s" - f9x_flags_set=yes -fi diff --git a/fortran/config/linux-gnu b/fortran/config/linux-gnu deleted file mode 100644 index d139966..0000000 --- a/fortran/config/linux-gnu +++ /dev/null @@ -1,4 +0,0 @@ -# -*- shell-script -*- -# This is the same as linux-gnulibc1 - -. $srcdir/config/linux-gnulibc1 diff --git a/fortran/config/linux-gnuaout b/fortran/config/linux-gnuaout deleted file mode 100644 index d139966..0000000 --- a/fortran/config/linux-gnuaout +++ /dev/null @@ -1,4 +0,0 @@ -# -*- shell-script -*- -# This is the same as linux-gnulibc1 - -. $srcdir/config/linux-gnulibc1 diff --git a/fortran/config/linux-gnulibc1 b/fortran/config/linux-gnulibc1 deleted file mode 100644 index 7ecead5..0000000 --- a/fortran/config/linux-gnulibc1 +++ /dev/null @@ -1,51 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# The default compiler is `gcc'. -if test -z "$CC"; then - CC=gcc - CC_BASENAME=gcc -fi - -# Omit frame pointer for optimized code? -NOFP=${NOFP:=-fomit-frame-pointer} - -# Figure out compiler flags -. $srcdir/config/gnu-flags - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the Linux architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_INTEGER)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test -z "$F9X"; then - F9X=pgf90 -fi - -if test -z "$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="" - DEBUG_FFLAGS="" - PROD_FFLAGS="" - PROFILE_FFLAGS="" - f9x_flags_set=yes -fi diff --git a/fortran/config/linux-gnulibc2 b/fortran/config/linux-gnulibc2 deleted file mode 100644 index 4551fb6..0000000 --- a/fortran/config/linux-gnulibc2 +++ /dev/null @@ -1,10 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Same as with gnulibc1 for now -. $srcdir/config/linux-gnulibc1 diff --git a/fortran/config/powerpc-ibm-aix4.x b/fortran/config/powerpc-ibm-aix4.x deleted file mode 100644 index 5124107..0000000 --- a/fortran/config/powerpc-ibm-aix4.x +++ /dev/null @@ -1,44 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Cross compiling defaults -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the AIX architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_INTEGER)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=xlf -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="-qsuffix=f=f90" - FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FFLAGS="-O" - PROD_FFLAGS="-O" - PROFILE_FFLAGS="-O" - f9x_flags_set=yes -fi diff --git a/fortran/config/powerpc-ibm-aix5.x b/fortran/config/powerpc-ibm-aix5.x deleted file mode 100644 index 9b9a4d1..0000000 --- a/fortran/config/powerpc-ibm-aix5.x +++ /dev/null @@ -1,96 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - -# Use AIX supplied C compiler by default, xlc for serial, mpcc_r for parallel. -# Use -D_LARGE_FILES by default to support large file size. -if test "X-" = "X-$CC"; then - if test "X-$enable_parallel" = "X-yes"; then - CC='mpcc_r -qlanglvl=ansi -D_LARGE_FILES' - CC_BASENAME=mpcc_r - else - CC='xlc -qlanglvl=ansi -D_LARGE_FILES' - CC_BASENAME=xlc - fi -fi - -# Define RUNPARALLEL if parallel mode is enabled or a parallel compiler used. -if test "X-$enable_parallel" = "X-yes" -o X-$CC_BASENAME = X-mpcc_r; then - RUNPARALLEL=${RUNPARALLEL="MP_PROCS=\$\${NPROCS:=3} MP_TASKS_PER_NODE=\$\${NPROCS:=3} poe"} -fi - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. - -case $CC_BASENAME in - xlc|mpcc_r) - # Turn off shared lib option. It causes some test suite to fail. - enable_shared="${enable_shared:-no}" - # CFLAGS must be set else configure set it to -g - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - # -O causes test/dtypes to fail badly. Turn it off for now. - PROD_CFLAGS="" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - gcc) - . $srcdir/config/gnu-flags - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the AIX architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_INTEGER)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - if test "X-$enable_parallel" = "X-yes"; then - F9X=mpxlf_r - else - F9X=xlf - fi -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="-qsuffix=f=f90" - FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FFLAGS="-O" - PROD_FFLAGS="-O" - PROFILE_FFLAGS="-O" - f9x_flags_set=yes -fi diff --git a/fortran/config/rs6000-ibm-aix4.x b/fortran/config/rs6000-ibm-aix4.x deleted file mode 100644 index 5124107..0000000 --- a/fortran/config/rs6000-ibm-aix4.x +++ /dev/null @@ -1,44 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details. - -# Cross compiling defaults -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} -hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the AIX architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_INTEGER)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=xlf -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="-qsuffix=f=f90" - FFLAGS="-static -O ${F9XSUFFIXFLAG} -qmoddir=./ -k" - FSEARCH_DIRS="-I./ -I../src" - DEBUG_FFLAGS="-O" - PROD_FFLAGS="-O" - PROFILE_FFLAGS="-O" - f9x_flags_set=yes -fi diff --git a/fortran/config/solaris2.x b/fortran/config/solaris2.x deleted file mode 100644 index 52df28e..0000000 --- a/fortran/config/solaris2.x +++ /dev/null @@ -1,64 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. -# -# See BlankForm in this directory for details - -# The default compiler is `sunpro cc' -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi - -# Try gcc compiler flags -. $srcdir/config/gnu-flags - -# Try solaris native compiler flags -if test "X-" = "X-$cc_flags_set"; then - CFLAGS="-erroff=%none" - DEBUG_CFLAGS=-g - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O -s" - PROD_CPPFLAGS= - PROFILE_CFLAGS=-xpg - PROFILE_CPPFLAGS= - cc_flags_set=yes - # Turn off optimization flag for SUNpro compiler versions 4.x which - # have an optimization bug. Version 5.0 works. - ($CC -V 2>&1) | grep -s 'cc: .* C 4\.' >/dev/null 2>&1 \ - && PROD_CFLAGS="`echo $PROD_CFLAGS | sed -e 's/-O//'`" -fi - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the Sparc Solaris architechture) -# -R_LARGE=18 -R_INTEGER=9 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_INTEGER)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="" - DEBUG_FFLAGS="" - PROD_FFLAGS="" - PROFILE_FFLAGS="" - f9x_flags_set=yes -fi diff --git a/fortran/config/sv1-cray b/fortran/config/sv1-cray deleted file mode 100644 index e2a4baf..0000000 --- a/fortran/config/sv1-cray +++ /dev/null @@ -1,170 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp" - DEBUG_FFLAGS="-dp" - PROD_FFLAGS="-dp" - PROFILE_FFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicos b/fortran/config/unicos deleted file mode 100644 index 541bd78..0000000 --- a/fortran/config/unicos +++ /dev/null @@ -1,168 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp" - DEBUG_FFLAGS="-dp" - PROD_FFLAGS="-dp" - PROFILE_FFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicos10.0.X b/fortran/config/unicos10.0.X deleted file mode 100644 index 541bd78..0000000 --- a/fortran/config/unicos10.0.X +++ /dev/null @@ -1,168 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero -h scalar0" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS="-DH5F_OPT_SEEK=0 -DH5F_LOW_DFLT=H5F_LOW_SEC2" - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp" - DEBUG_FFLAGS="-dp" - PROD_FFLAGS="-dp" - PROFILE_FFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicosmk b/fortran/config/unicosmk deleted file mode 100644 index e2a4baf..0000000 --- a/fortran/config/unicosmk +++ /dev/null @@ -1,170 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp" - DEBUG_FFLAGS="-dp" - PROD_FFLAGS="-dp" - PROFILE_FFLAGS="-dp" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicosmk2.0.5.X b/fortran/config/unicosmk2.0.5.X deleted file mode 100644 index 68a19a8..0000000 --- a/fortran/config/unicosmk2.0.5.X +++ /dev/null @@ -1,172 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 was stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp -Wl-M405" - DEBUG_FFLAGS="" - PROD_FFLAGS="" - PROFILE_FFLAGS="" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicosmk2.0.6.X b/fortran/config/unicosmk2.0.6.X deleted file mode 100644 index e4e02fc..0000000 --- a/fortran/config/unicosmk2.0.6.X +++ /dev/null @@ -1,172 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 and 412 were stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp -Wl-M405,412" - DEBUG_FFLAGS="" - PROD_FFLAGS="" - PROFILE_FFLAGS="" - f9x_flags_set=yes -fi diff --git a/fortran/config/unicosmk2.0.X b/fortran/config/unicosmk2.0.X deleted file mode 100644 index 68a19a8..0000000 --- a/fortran/config/unicosmk2.0.X +++ /dev/null @@ -1,172 +0,0 @@ -# -*- shell-script -*- -# -# This file is part of the HDF5 build script. It is processed shortly -# after configure starts and defines, among other things, flags for -# the various compile modes. - - -#---------------------------------------------------------------------------- -# Compiler flags. The CPPFLAGS values should not include package debug -# flags like `-DH5G_DEBUG' since these are added with the -# `--enable-debug' switch of configure. -#---------------------------------------------------------------------------- - - -# Choosing a C Compiler -# --------------------- -# -# The user should be able to specify the compiler by setting the CC -# environment variable to the name of the compiler and any switches it -# requires for proper operation. If CC is unset then this script may -# set it. If CC is unset by time this script completes then configure -# will try `gcc' and `cc' in that order (perhaps some others too). -# -# Note: Code later in this file may depend on the value of $CC_BASENAME -# in order to distinguish between different compilers when -# deciding which compiler command-line switches to use. This -# variable is set based on the incoming value of $CC and is only -# used within this file. - -if test "X-" = "X-$CC"; then - CC=cc - CC_BASENAME=cc -fi -# no need to use RANLIB -RANLIB=: - - -# C Compiler and Preprocessor Flags -# --------------------------------- -# -# Flags that end with `_CFLAGS' are always passed to the compiler. -# Flags that end with `_CPPFLAGS' are passed to the compiler when -# compiling but not when linking. -# -# DEBUG_CFLAGS Flags to pass to the compiler to create a -# DEBUG_CPPFLAGS library suitable for use with debugging -# tools. Usually this list will exclude -# optimization switches (like `-O') and include -# switches that turn on symbolic debugging -# support (like `-g'). -# -# PROD_CFLAGS Flags to pass to the compiler to create a -# PROD_CPPFLAGS production version of the library. These -# usualy exclude symbolic debugging switches -# (like `-g') and include optimization switches -# (like `-O'). -# -# PROFILE_CFLAGS Flags to pass to the compiler to create a -# PROFILE_CPPFLAGS library suitable for performance testing (like -# `-pg'). This may or may not include debugging -# or production flags. -# -# CFLAGS Flags can be added to this variable which -# might already be partially initialized. These -# flags will always be passed to the compiler -# and should include switches to turn on full -# warnings. HDF5 attempts to be ANSI and Posix -# compliant and employ good programming -# practices resulting in few if any -# warnings. -# -# Warning flags do not have to be added to CFLAGS -# variable if the compiler is the GNU gcc -# compiler or a descendent of gcc such as EGCS or PGCC. -# -# The CFLAGS should contains *something* or else -# configure will probably add `-g'. For most -# systems this isn't a problem but some systems -# will disable optimizations in favor of the -# `-g'. -# -# -# These flags should be set according to the compiler being used. -# There are two ways to check the compiler. You can try using `-v' or -# `--version' to see if the compiler will print a version string. You -# can use the value of $CC_BASENAME which is the base name of the -# first word in $CC (note that the value of CC may have changed -# above). - -case $CC_BASENAME in - gcc) - CFLAGS="$CFLAGS -Wsign-compare" #Only works for some versions - DEBUG_CFLAGS="-g -fverbose-asm" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O3 -fomit-frame-pointer" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - cc) - CFLAGS="$CFLAGS" - DEBUG_CFLAGS="-g -h zero" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O2 -h scalar0" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; - - *) - CFLAGS="$CFLAGS -ansi" - DEBUG_CFLAGS="-g" - DEBUG_CPPFLAGS= - PROD_CFLAGS="-O" - PROD_CPPFLAGS= - PROFILE_CFLAGS="-pg" - PROFILE_CPPFLAGS= - ;; -esac - - - -# Overriding Configure Tests -# -------------------------- -# -# Values for overriding configuration tests when cross compiling. -# This includes compiling on some machines where the serial front end -# compiles for a parallel back end. - -# Set this to `yes' or `no' depending on whether the target is big -# endian or little endian. -#ac_cv_c_bigendian=${ac_cv_c_bigendian='yes'} - -# Set this to the width required by printf() to print type `long -# long'. For instance, if the format would be `%lld' then set it to -# `ll' or if the format would be `%qd' set it to `q'. -#hdf5_cv_printf_ll=${hdf5_cv_printf_ll='ll'} - -# The default Fortran 90 compiler - -# -# HDF5 integers -# -# R_LARGE is the number of digits for the bigest integer supported. -# R_INTEGER is the number of digits in INTEGER -# -# (for the UNICOS architechture) -# -R_LARGE=18 -R_INTEGER=18 -HSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HSSIZE_T='SELECTED_INT_KIND(R_LARGE)' -HID_T='SELECTED_INT_KIND(R_INTEGER)' -SIZE_T='SELECTED_INT_KIND(R_LARGE)' -OBJECT_NAMELEN_DEFAULT_F=-1 - -if test "X-" = "X-$F9X"; then - F9X=f90 -fi - -if test "X-" = "X-$f9x_flags_set"; then - # -Wl passes flags to the linker and -M# will ignore warnings with - # number #. Warning 405 was stopping the executable from being built. - F9XSUFFIXFLAG="" - FSEARCH_DIRS="" - FFLAGS="-dp -Wl-M405" - DEBUG_FFLAGS="" - PROD_FFLAGS="" - PROFILE_FFLAGS="" - f9x_flags_set=yes -fi diff --git a/fortran/configure b/fortran/configure deleted file mode 100755 index a01c267..0000000 --- a/fortran/configure +++ /dev/null @@ -1,11108 +0,0 @@ -#! /bin/sh -# From configure.in Id: configure.in. -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.53 for HDF5 Fortran 1.7.1. -# -# Report bugs to . -# -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - - -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# NLS nuisances. -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } - - -# Name of the executable. -as_me=`(basename "$0") 2>/dev/null || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conftest.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='HDF5 Fortran' -PACKAGE_TARNAME='hdf5-fortran' -PACKAGE_VERSION='1.7.1' -PACKAGE_STRING='HDF5 Fortran 1.7.1' -PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' - -ac_unique_file="src/HDF5.f90" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures HDF5 Fortran 1.7.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 Fortran 1.7.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-shared=PKGS build shared libraries default=yes - --enable-static=PKGS build static libraries default=yes - --enable-fast-install=PKGS optimize for fast installation default=yes - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-production Determines how to run the compiler. - --enable-static-exec Build only statically linked executables - [default=no] - --enable-linux-lfs Enable support for large (64-bit) files on Linux. - [default=check] - --enable-stream-vfd Build the Stream Virtual File Driver [default=no] - --enable-filters=all Turn on all internal I/O filters. One may also - specify a comma-separated list of filters or the - word no. The default is all internal I/O filters. - --enable-parallel Search for MPI-IO and MPI support files - --enable-gpfs Enable GPFS hints for the MPI/POSIX file driver. - [default=no] - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-pic try to use only PIC/non-PIC objects default=use both - --with-zlib=DIR Use zlib library for external deflate I/O filter - [default=yes] - --with-szlib=DIR Use szlib library for external szlib I/O filter - [default=yes] - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -HDF5 Fortran configure 1.7.1 -generated by GNU Autoconf 2.53 - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by HDF5 Fortran $as_me 1.7.1, which was -generated by GNU Autoconf 2.53. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell meta-characters. -ac_configure_args= -ac_sep= -for ac_arg -do - case $ac_arg in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n ) continue ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - ac_sep=" " ;; - esac - # Get rid of the leading space. -done - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core core.* *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - -ac_config_headers="$ac_config_headers src/H5config_fortran.h" - - -ac_aux_dir= -for ac_dir in ../bin $srcdir/../bin; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - -ac_config_commands="$ac_config_commands default-1" - - -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - - - - - - - - - - - - - -echo "$as_me:$LINENO: checking shell variables initial values" >&5 -echo $ECHO_N "checking shell variables initial values... $ECHO_C" >&6 -set >&5 -echo "$as_me:$LINENO: result: done" >&5 -echo "${ECHO_T}done" >&6 - -if test -x "/bin/pwd"; then - pwd=/bin/pwd -else - pwd=pwd -fi - ROOT=`$pwd` - -echo "$as_me:$LINENO: checking for cached host" >&5 -echo $ECHO_N "checking for cached host... $ECHO_C" >&6 -if test "${hdf5_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - hdf5_cv_host="none" -fi -echo "$as_me:$LINENO: result: $hdf5_cv_host" >&5 -echo "${ECHO_T}$hdf5_cv_host" >&6; -if test "X$hdf5_cv_host" = "Xnone"; then - hdf5_cv_host=$host -elif test "$hdf5_cv_host" != "$host"; then - echo "The config.cache file was generated on $hdf5_cv_host but" - echo "this is $host. Please remove that file and try again." - { { echo "$as_me:$LINENO: error: config.cache file is invalid" >&5 -echo "$as_me: error: config.cache file is invalid" >&2;} - { (exit 1); exit 1; }; } -fi - -case "$host_os" in - aix4.*) - host_os_novers=aix4.x - ;; - aix5.*) - host_os_novers=aix5.x - ;; - freebsd*) - host_os_novers=freebsd - ;; - irix5.*) - host_os_novers=irix5.x - ;; - irix6.*) - host_os_novers=irix6.x - ;; - osf4.*) - host_os_novers=osf4.x - ;; - osf5.*) - host_os_novers=osf5.x - ;; - solaris2.*) - host_os_novers=solaris2.x - ;; - *) - host_os_novers=$host_os - ;; -esac - -host_config="none" -for f in $host_cpu-$host_vendor-$host_os \ - $host_cpu-$host_vendor-$host_os_novers \ - $host_vendor-$host_os \ - $host_vendor-$host_os_novers \ - $host_cpu-$host_os \ - $host_cpu-$host_os_novers \ - $host_cpu-$host_vendor \ - $host_os \ - $host_os_novers \ - $host_vendor \ - $host_cpu ; do - echo "$as_me:$LINENO: checking for config $f" >&5 -echo $ECHO_N "checking for config $f... $ECHO_C" >&6 - if test -f $srcdir/config/$f; then - host_config=$srcdir/config/$f - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 - break - fi - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -done -if test "X$host_config" != "Xnone"; then - CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" - . $host_config -fi - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$as_dir/$ac_word" ${1+"$@"} - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; - ls a.out conftest 2>/dev/null; - ls a.* conftest.* 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; - a.out ) # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool --akim. - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 -echo "$as_me: error: C compiler cannot create executables" >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_prog_cc_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_declaration -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="${MAKE}"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} -case $enableval in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_shared=yes -fi; -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} -case $enableval in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_static=yes -fi; -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} -case $enableval in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac -else - enable_fast_install=yes -fi; -# Find the correct PATH separator. Usually this is `:', but -# DJGPP uses `;' like DOS. -if test "X${PATH_SEPARATOR+set}" != Xset; then - UNAME=${UNAME-`uname 2>/dev/null`} - case X$UNAME in - *-DOS) lt_cv_sys_path_separator=';' ;; - *) lt_cv_sys_path_separator=':' ;; - esac - PATH_SEPARATOR=$lt_cv_sys_path_separator -fi - - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - - -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -test -n "$reload_flag" && reload_flag=" $reload_flag" - -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/${ac_tool_prefix}nm - if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi - -NM="$lt_cv_path_NM" -echo "$as_me:$LINENO: result: $NM" >&5 -echo "${ECHO_T}$NM" >&6 - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 -fi - -echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 -echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20*|hpux11*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - -irix5* | irix6*) - case $host_os in - irix5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux-gnu*) - case $host_cpu in - alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv5uw[78]* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; -esac - -fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method - - - - - - - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output" >&5 -echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix*) - symcode='[BCDEGRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. -lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - save_LIBS="$LIBS" - save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - pipe_works=yes - fi - LIBS="$save_LIBS" - CFLAGS="$save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" -if test -z "$lt_cv_sys_global_symbol_pipe"; then - global_symbol_to_cdecl= - global_symbol_to_c_name_address= -else - global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" - global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" -fi -if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; -then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 -fi - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#include -#include -#include - -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in - /*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; - ?:/*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. - ;; - *) - ac_save_MAGIC_CMD="$MAGIC_CMD" - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="/usr/bin:$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$ac_save_ifs" - MAGIC_CMD="$ac_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 3898 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -lt_cv_cc_needs_belf=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - - -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -need_locks="$enable_libtool_lock" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -if test x"$host" != x"$build"; then - ac_tool_prefix=${host_alias}- -else - ac_tool_prefix= -fi - -# Transform linux* to *-*-linux-gnu*, to support old configure scripts. -case $host_os in -linux-gnu*) ;; -linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` -esac - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - objdir=_libs -fi -rmdir .libs 2>/dev/null -echo "$as_me:$LINENO: result: $objdir" >&5 -echo "${ECHO_T}$objdir" >&6 - - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default - -# We assume here that the value for lt_cv_prog_cc_pic will not be cached -# in isolation, and that seeing it set (from the cache) indicates that -# the associated values are set (in the cache) correctly too. -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_pic+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_pic= - lt_cv_prog_cc_shlib= - lt_cv_prog_cc_wl= - lt_cv_prog_cc_static= - lt_cv_prog_cc_no_builtin= - lt_cv_prog_cc_can_build_shared=$can_build_shared - - if test "$GCC" = yes; then - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-static' - - case $host_os in - aix*) - # Below there is a dirty hack to force normal static linking with -ldl - # The problem is because libdl dynamically linked with both libc and - # libC (AIX C++ library), which obviously doesn't included in libraries - # list by gcc. This cause undefined symbols with -static flags. - # This hack allows C programs to be linked with "-static -ldl", but - # not sure about C++ programs. - lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_cv_prog_cc_pic='-fno-common' - ;; - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_cv_prog_cc_pic=-Kconform_pic - fi - ;; - *) - lt_cv_prog_cc_pic='-fPIC' - ;; - esac - else - # PORTME Check for PIC flags for the system compiler. - case $host_os in - aix3* | aix4* | aix5*) - lt_cv_prog_cc_wl='-Wl,' - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_cv_prog_cc_static='-Bstatic' - else - #################################################################### - ## HACK Alert! This is causing problems with C++ on SP3...We'll just - ## remove this...THERE! All better now. - #################################################################### - ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' - : - fi - ;; - - hpux9* | hpux10* | hpux11*) - # Is there a better lt_cv_prog_cc_static that works with the bundled CC? - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" - lt_cv_prog_cc_pic='+Z' - ;; - - irix5* | irix6*) - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - # PIC (with -KPIC) is the default. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_cv_prog_cc_pic='-DDLL_EXPORT' - ;; - - newsos6) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - ;; - - osf3* | osf4* | osf5*) - # All OSF/1 code is PIC. - lt_cv_prog_cc_wl='-Wl,' - lt_cv_prog_cc_static='-non_shared' - ;; - - sco3.2v5*) - lt_cv_prog_cc_pic='-Kpic' - lt_cv_prog_cc_static='-dn' - lt_cv_prog_cc_shlib='-belf' - ;; - - solaris*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Wl,' - ;; - - sunos4*) - lt_cv_prog_cc_pic='-PIC' - lt_cv_prog_cc_static='-Bstatic' - lt_cv_prog_cc_wl='-Qoption ld ' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - lt_cv_prog_cc_pic='-KPIC' - lt_cv_prog_cc_static='-Bstatic' - if test "x$host_vendor" = xsni; then - lt_cv_prog_cc_wl='-LD' - else - lt_cv_prog_cc_wl='-Wl,' - fi - ;; - - uts4*) - lt_cv_prog_cc_pic='-pic' - lt_cv_prog_cc_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_cv_prog_cc_pic='-Kconform_pic' - lt_cv_prog_cc_static='-Bstatic' - fi - ;; - - *) - lt_cv_prog_cc_can_build_shared=no - ;; - esac - fi - -fi - -if test -z "$lt_cv_prog_cc_pic"; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -else - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 - - # Check to make sure the pic_flag actually works. - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 - if test "${lt_cv_prog_cc_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - case $host_os in - hpux9* | hpux10* | hpux11*) - # On HP-UX, both CC and GCC only warn that PIC is supported... then - # they create non-PIC objects. So, if there were any warnings, we - # assume that PIC is not supported. - if test -s conftest.err; then - lt_cv_prog_cc_pic_works=no - else - lt_cv_prog_cc_pic_works=yes - fi - ;; - *) - lt_cv_prog_cc_pic_works=yes - ;; - esac - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 - lt_cv_prog_cc_pic_works=no - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - -fi - - - if test "X$lt_cv_prog_cc_pic_works" = Xno; then - lt_cv_prog_cc_pic= - lt_cv_prog_cc_can_build_shared=no - else - lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" - fi - - echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 -fi - -# Check for any special shared library compilation flags. -if test -n "$lt_cv_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - -echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 -if test "${lt_cv_prog_cc_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_cc_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_prog_cc_static_works=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi - - -# Belt *and* braces to stop my trousers falling down: -test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= -echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 - -pic_flag="$lt_cv_prog_cc_pic" -special_shlib_compile_flags="$lt_cv_prog_cc_shlib" -wl="$lt_cv_prog_cc_wl" -link_static_flag="$lt_cv_prog_cc_static" -no_builtin_flag="$lt_cv_prog_cc_no_builtin" -can_build_shared="$lt_cv_prog_cc_can_build_shared" - - -# Check to see if options -o and -c are simultaneously supported by compiler -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -$rm -r conftest 2>/dev/null -mkdir conftest -cd conftest -echo "int some_variable = 0;" > conftest.$ac_ext -mkdir out -# According to Tom Tromey, Ian Lance Taylor reported there are C compilers -# that will create temporary files in the current directory regardless of -# the output directory. Thus, making CWD read-only will cause this test -# to fail, enabling locking or at least warning the user not to do parallel -# builds. -chmod -w . -save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" -compiler_c_o=no -if { (eval echo configure:4439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - lt_cv_compiler_c_o=no - else - lt_cv_compiler_c_o=yes - fi -else - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - lt_cv_compiler_c_o=no -fi -CFLAGS="$save_CFLAGS" -chmod u+w . -$rm conftest* out/* -rmdir out -cd .. -rmdir conftest -$rm -r conftest 2>/dev/null - -fi - -compiler_c_o=$lt_cv_compiler_c_o -echo "$as_me:$LINENO: result: $compiler_c_o" >&5 -echo "${ECHO_T}$compiler_c_o" >&6 - -if test x"$compiler_c_o" = x"yes"; then - # Check to see if we can write to a .lo - echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 - if test "${lt_cv_compiler_o_lo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - lt_cv_compiler_o_lo=no - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -c -o conftest.lo" - save_objext="$ac_objext" - ac_objext=lo - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - lt_cv_compiler_o_lo=no - else - lt_cv_compiler_o_lo=yes - fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext - ac_objext="$save_objext" - CFLAGS="$save_CFLAGS" - -fi - - compiler_o_lo=$lt_cv_compiler_o_lo - echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 -echo "${ECHO_T}$compiler_o_lo" >&6 -else - compiler_o_lo=no -fi - -# Check to see if we can do hard links to lock some files if needed -hard_links="nottested" -if test "$compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -if test "$GCC" = yes; then - # Check to see if options -fno-rtti -fno-exceptions are supported by compiler - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 - echo "int some_variable = 0;" > conftest.$ac_ext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - compiler_rtti_exceptions=no - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int some_variable = 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - compiler_rtti_exceptions=no - else - compiler_rtti_exceptions=yes - fi - -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -fi -rm -f conftest.$ac_objext conftest.$ac_ext - CFLAGS="$save_CFLAGS" - echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$compiler_rtti_exceptions" >&6 - - if test "$compiler_rtti_exceptions" = "yes"; then - no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' - else - no_builtin_flag=' -fno-builtin' - fi -fi - -# See if the linker supports building shared libraries. -echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 - -allow_undefined_flag= -no_undefined_flag= -need_lib_prefix=unknown -need_version=unknown -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -archive_cmds= -archive_expsym_cmds= -old_archive_from_new_cmds= -old_archive_from_expsyms_cmds= -export_dynamic_flag_spec= -whole_archive_flag_spec= -thread_safe_flag_spec= -hardcode_into_libs=no -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no -hardcode_shlibpath_var=unsupported -runpath_var= -link_all_deplibs=unknown -always_export_symbols=no -export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' -# include_expsyms should be a list of space-separated symbols to be *always* -# included in the symbol list -include_expsyms= -# exclude_expsyms can be an egrep regular expression of symbols to exclude -# it will be wrapped by ` (' and `)$', so one must not match beginning or -# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', -# as well as any symbol that contains `d'. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" -# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out -# platforms (ab)use it in PIC code, but their linkers get confused if -# the symbol is explicitly referenced. Since portable code cannot -# rely on this symbol name, it's probably fine to never include it in -# preloaded symbol tables. -extract_expsyms_cmds= - -case $host_os in -cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; -openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX, the GNU linker is very broken - # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left be newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi -else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - hardcode_direct=yes - archive_cmds='' - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - shared_flag='${wl}-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall can do strange things, so it is better to - # generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - ####################################################################### - # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue. - # The ``-b nolibpath -b ...'' flags were messing with the mpicc - # compiler's already defined library paths and it wasn't able to find - # the libraries it needed to run....DOH! - hname="`hostname`" - - case "$hname" in - *pacific.llnl.gov* | *s0*) - hardcode_libdir_flag_spec=' ' - ;; - *) - hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' - ;; - esac - # - # End MAJOR HACK - # - ####################################################################### - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='${wl}-berok' - # This is a bit strange, but is similar to how AIX traditionally builds - # it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - case $host_os in - hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; - *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; - esac - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_minus_L=yes # Not in the search PATH, but as the default - # location of the library. - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - #Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - export_dynamic_flag_spec='${wl}-Bexport' - ;; - - solaris*) - # gcc --version < 3.0 without binutils cannot create self contained - # shared libraries reliably, requiring libgcc.a to resolve some of - # the object symbols generated in some cases. Libraries that use - # assert need libgcc.a to resolve __eprintf, for example. Linking - # a copy of libgcc.a into every shared library to guarantee resolving - # such symbols causes other problems: According to Tim Van Holder - # , C++ libraries end up with a separate - # (to the application) exception stack for one thing. - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - case `$CC --version 2>/dev/null` in - [12].*) - cat <&2 - -*** Warning: Releases of GCC earlier than version 3.0 cannot reliably -*** create self contained shared libraries on Solaris systems, without -*** introducing a dependency on libgcc.a. Therefore, libtool is disabling -*** -no-undefined support, which will at least allow you to build shared -*** libraries. However, you may find that when you link such libraries -*** into an application without using GCC, you have to manually add -*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to -*** upgrade to a newer version of GCC. Another option is to rebuild your -*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. - -EOF - no_undefined_flag= - ;; - esac - fi - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsno; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5uw7* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac -fi -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no - -# Check hardcoding attributes. -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$hardcode_shlibpath_var" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -reload_cmds='$LD$reload_flag -o $output$reload_objs' -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -# PORTME Fill in your ld.so characteristics -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can - # not hardcode correct soname into executable. Probably we can - # add versioning support to collect2, so additional links can - # be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - export_dynamic_flag_spec=-rdynamic - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - *) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - dynamic_linker="$host_os dld.sl" - version_type=sunos - need_lib_prefix=no - need_version=no - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6*) - version_type=irix - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case "$host_os" in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -# Report the final consequences. -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -f = shl_load; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -f = dlopen; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - if test "${lt_cv_archive_cmds_need_lc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_cv_prog_cc_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi -fi - - echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 -echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 - ;; - esac -fi -need_lc=${lt_cv_archive_cmds_need_lc-yes} - -# The second clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - : -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - -if test -f "$ltmain"; then - trap "$rm \"${ofile}T\"; exit 1" 1 2 15 - $rm -f "${ofile}T" - - echo creating $ofile - - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS \ - AR AR_FLAGS CC LD LN_S NM SHELL \ - reload_flag reload_cmds wl \ - pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ - thread_safe_flag_spec whole_archive_flag_spec libname_spec \ - library_names_spec soname_spec \ - RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ - old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ - postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ - old_striplib striplib file_magic_cmd export_symbols_cmds \ - deplibs_check_method allow_undefined_flag no_undefined_flag \ - finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ - global_symbol_to_c_name_address \ - hardcode_libdir_flag_spec hardcode_libdir_separator \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do - - case $var in - reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ - extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - cat <<__EOF__ > "${ofile}T" -#! $SHELL - -# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996-2000 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# The default C compiler. -CC=$lt_CC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_pic_flag -pic_mode=$pic_mode - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_compiler_c_o - -# Can we write directly to a .lo ? -compiler_o_lo=$lt_compiler_o_lo - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_link_static_flag - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - case $host_os in - aix3*) - cat <<\EOF >> "${ofile}T" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - case $host_os in - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "${ofile}T" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) - - mv -f "${ofile}T" "$ofile" || \ - (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") - chmod +x "$ofile" -fi - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - PERL="" -if test "X$GCC" = "Xyes"; then - for ac_prog in perl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_PERL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$PERL"; then - ac_cv_prog_PERL="$PERL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_PERL="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -PERL=$ac_cv_prog_PERL -if test -n "$PERL"; then - echo "$as_me:$LINENO: result: $PERL" >&5 -echo "${ECHO_T}$PERL" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$PERL" && break -done - -fi - -if test -z "$AR"; then - for ac_prog in ar xar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AR" && break -done -test -n "$AR" || AR=":" - -fi - - -if test -z "$SEARCH"; then - echo "$as_me:$LINENO: checking how make searches directories" >&5 -echo $ECHO_N "checking how make searches directories... $ECHO_C" >&6 - while true; do #for break - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: VPATH=DIR1 DIR2 ..." >&5 -echo "${ECHO_T}VPATH=DIR1 DIR2 ..." >&6 - break - fi - - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=':' - echo "$as_me:$LINENO: result: VPATH=DIR1:DIR2:..." >&5 -echo "${ECHO_T}VPATH=DIR1:DIR2:..." >&6 - break - fi - - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='.PATH: ' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: .PATH: DIR1 DIR2 ..." >&5 -echo "${ECHO_T}.PATH: DIR1 DIR2 ..." >&6 - break - fi - - SEARCH_RULE='## SEARCH DISABLED: ' - SEARCH_SEP=' ' - echo "$as_me:$LINENO: result: it doesn't" >&5 -echo "${ECHO_T}it doesn't" >&6 - if test ! -f configure; then - { { echo "$as_me:$LINENO: error: ${MAKE-make} requires the build and source directories to be the same" >&5 -echo "$as_me: error: ${MAKE-make} requires the build and source directories to be the same" >&2;} - { (exit 1); exit 1; }; } - fi - break - done - rm maketest -fi - -echo "$as_me:$LINENO: checking for production mode" >&5 -echo $ECHO_N "checking for production mode... $ECHO_C" >&6 -# Check whether --enable-production or --disable-production was given. -if test "${enable_production+set}" = set; then - enableval="$enable_production" - -fi; - -case "X-$enable_production" in - X-yes) - echo "$as_me:$LINENO: result: \"production\"" >&5 -echo "${ECHO_T}\"production\"" >&6 - - CFLAGS_temp="" - if test -n "$CFLAGS"; then - for d in $CFLAGS ; do - if test "X$d" != "X-g"; then - CFLAGS_temp="$CFLAGS_temp $d" - fi - done - CFLAGS=$CFLAGS_temp - fi - - CONFIG_MODE=production - CFLAGS="$CFLAGS $PROD_CFLAGS" - CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" - ;; - X-|X-no) - echo "$as_me:$LINENO: result: \"development\"" >&5 -echo "${ECHO_T}\"development\"" >&6 - CONFIG_MODE=development - CFLAGS="$CFLAGS $DEBUG_CFLAGS" - CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" - ;; - X-pg|X-profile) - echo "$as_me:$LINENO: result: \"profile\"" >&5 -echo "${ECHO_T}\"profile\"" >&6 - CONFIG_MODE=profile - CFLAGS="$CXXFLAGS $PROFILE_CFLAGS" - CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" - ;; - *) - echo "$as_me:$LINENO: result: \"user-defined\"" >&5 -echo "${ECHO_T}\"user-defined\"" >&6 - CONFIG_MODE="$X-enableval" - ;; -esac - - -echo "$as_me:$LINENO: checking for ceil in -lm" >&5 -echo $ECHO_N "checking for ceil in -lm... $ECHO_C" >&6 -if test "${ac_cv_lib_m_ceil+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char ceil (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -ceil (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_m_ceil=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_m_ceil=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_m_ceil" >&5 -echo "${ECHO_T}$ac_cv_lib_m_ceil" >&6 -if test $ac_cv_lib_m_ceil = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF - - LIBS="-lm $LIBS" - -fi - - -if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then - -echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 -echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_socket+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char socket (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -socket (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_socket=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_socket_socket=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6 -if test $ac_cv_lib_socket_socket = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSOCKET 1 -_ACEOF - - LIBS="-lsocket $LIBS" - -fi - - -echo "$as_me:$LINENO: checking for xdr_int in -lnsl" >&5 -echo $ECHO_N "checking for xdr_int in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_xdr_int+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char xdr_int (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -xdr_int (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_xdr_int=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_nsl_xdr_int=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_xdr_int" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_xdr_int" >&6 -if test $ac_cv_lib_nsl_xdr_int = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBNSL 1 -_ACEOF - - LIBS="-lnsl $LIBS" - -fi - -fi - -echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5 -echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6 -# Check whether --enable-static_exec or --disable-static_exec was given. -if test "${enable_static_exec+set}" = set; then - enableval="$enable_static_exec" - STATIC_EXEC=$enableval -fi; - -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - LT_STATIC_EXEC="-all-static" -else - echo "no" - LT_STATIC_EXEC="" -fi - - -case "$host_cpu-$host_vendor-$host_os" in - *linux*) - # Check whether --enable-linux-lfs or --disable-linux-lfs was given. -if test "${enable_linux_lfs+set}" = set; then - enableval="$enable_linux_lfs" - -fi; - - LINUX_LFS="no" - case "X-$enable_linux_lfs" in - X-yes) - LINUX_LFS=yes - ;; - X-no) - ;; - X-|*) - MAJOR_VER="`uname -r | cut -d '.' -f1`" - MINOR_VER="`uname -r | cut -d '.' -f2`" - - if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then - LINUX_LFS="yes" - fi - ;; - esac - - echo "$as_me:$LINENO: checking for large file support mode on Linux" >&5 -echo $ECHO_N "checking for large file support mode on Linux... $ECHO_C" >&6 - if test "X$LINUX_LFS" = "Xyes"; then - echo "$as_me:$LINENO: result: enabled" >&5 -echo "${ECHO_T}enabled" >&6 - CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS" - else - echo "$as_me:$LINENO: result: disabled" >&5 -echo "${ECHO_T}disabled" >&6 - fi - - CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS" - - CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS" - ;; -esac - -for ac_prog in f90 pgf90 xlf90 f95 g95 xlf95 -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_F9X+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$F9X"; then - ac_cv_prog_F9X="$F9X" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_F9X="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -F9X=$ac_cv_prog_F9X -if test -n "$F9X"; then - echo "$as_me:$LINENO: result: $F9X" >&5 -echo "${ECHO_T}$F9X" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$F9X" && break -done - -test -z "$F9X" && { { echo "$as_me:$LINENO: error: no acceptable f9X compiler found in \$PATH" >&5 -echo "$as_me: error: no acceptable f9X compiler found in \$PATH" >&2;} - { (exit 1); exit 1; }; } - - -echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works" >&5 -echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works... $ECHO_C" >&6 - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -cat > conftest.$ac_ext << EOF - - program conftest - end - -EOF -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then - ac_cv_prog_f9x_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_f9x_cross=no - else - ac_cv_prog_f9x_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_f9x_works=no -fi -rm -fr conftest* - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_works" >&5 -echo "${ECHO_T}$ac_cv_prog_f9x_works" >&6 -if test $ac_cv_prog_f9x_works = no; then - { { echo "$as_me:$LINENO: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&5 -echo "$as_me: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&2;} - { (exit 1); exit 1; }; } -fi -echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_cross" >&5 -echo "${ECHO_T}$ac_cv_prog_f9x_cross" >&6 -cross_compiling=$ac_cv_prog_f9x_cross - -echo "$as_me:$LINENO: checking whether we are using GNU Fortran 95" >&5 -echo $ECHO_N "checking whether we are using GNU Fortran 95... $ECHO_C" >&6 -if test "${ac_cv_prog_g9x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.fpp <&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_g9x=yes -else - ac_cv_prog_g9x=no -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_g9x" >&5 -echo "${ECHO_T}$ac_cv_prog_g9x" >&6 - -if test $ac_cv_prog_g9x = yes; then - G9X=yes - ac_test_FFLAGS="${FFLAGS+set}" - ac_save_FFLAGS="$FFLAGS" - FFLAGS= - echo "$as_me:$LINENO: checking whether $F9X accepts -g" >&5 -echo $ECHO_N "checking whether $F9X accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_f9x_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.f << EOF - program conftest - end -EOF -if test -z "`$F9X -g -c conftest.f 2>&1`"; then - ac_cv_prog_f9x_g=yes -else - ac_cv_prog_f9x_g=no -fi -rm -f conftest* - -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_g" >&5 -echo "${ECHO_T}$ac_cv_prog_f9x_g" >&6 - if test "$ac_test_FFLAGS" = set; then - FFLAGS="$ac_save_FFLAGS" - elif test $ac_cv_prog_f9x_g = yes; then - FFLAGS="-g -O2" - else - FFLAGS="-O2" - fi -else - G9X= - test "${FFLAGS+set}" = set || FFLAGS="-g" -fi - -echo "$as_me:$LINENO: checking what $F9X does with modules" >&5 -echo $ECHO_N "checking what $F9X does with modules... $ECHO_C" >&6 - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&1 -if test "$modfiles" = file.o; then - echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6 - OLD_FFLAGS=$FFLAGS - FFLAGS="$FFLAGS -em" - eval $ac_compile - modfiles="" - for f in file.o module.mod MODULE.mod module.M MODULE.M; do - test -f $f && modfiles="$f" - done - if test "$modfiles" = "file.o"; then - FFLAGS=$OLD_FFLAGS - echo no 6>&1 - else - echo yes 6>&1 - fi -fi -cd .. - -echo "$as_me:$LINENO: checking how $F9X finds modules" >&5 -echo $ECHO_N "checking how $F9X finds modules... $ECHO_C" >&6 - -for flag in "-I" "-M" "-p"; do - cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - F9XMODFLAG=$flag - break - fi -done - -if test -n "$F9XMODFLAG"; then - echo $F9XMODFLAG 1>&6 - FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS" -else - echo unknown 1>&6 -fi - - -rm -rf conftest* - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -# Check whether --with-zlib or --without-zlib was given. -if test "${with_zlib+set}" = set; then - withval="$with_zlib" - -else - withval=yes -fi; - -case $withval in - yes) - HAVE_ZLIB="yes" - -for ac_header in zlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_ZLIB_H="yes" -fi - -done - - -echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 -echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 -if test "${ac_cv_lib_z_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -compress2 (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_z_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_z_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 -echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 -if test $ac_cv_lib_z_compress2 = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - unset HAVE_ZLIB -fi - - echo "$as_me:$LINENO: checking for compress2" >&5 -echo $ECHO_N "checking for compress2... $ECHO_C" >&6 -if test "${ac_cv_func_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_compress2) || defined (__stub___compress2) -choke me -#else -f = compress2; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5 -echo "${ECHO_T}$ac_cv_func_compress2" >&6 -if test $ac_cv_func_compress2 = yes; then - HAVE_COMPRESS2="yes" -fi - - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5 -echo "$as_me: error: couldn't find zlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; - no) - HAVE_ZLIB="no" - echo "$as_me:$LINENO: checking for GNU zlib" >&5 -echo $ECHO_N "checking for GNU zlib... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: suppressed" >&5 -echo "${ECHO_T}suppressed" >&6 - ;; - *) - HAVE_ZLIB="yes" - case "$withval" in - *,*) - zlib_inc="`echo $withval |cut -f1 -d,`" - zlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - zlib_inc="$withval/include" - zlib_lib="$withval/lib" - fi - ;; - esac - - if test "X$zlib_inc" = "X/usr/include"; then - zlib_inc="" - fi - if test "X$zlib_lib" = "X/usr/lib"; then - zlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$zlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$zlib_inc" - fi - - -for ac_header in zlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_ZLIB_H="yes" -else - CPPFLAGS="$saved_CPPFLAGS" -fi - -done - - - if test -n "$zlib_lib"; then - LDFLAGS="$LDFLAGS -L$zlib_lib" - fi - - -echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 -echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 -if test "${ac_cv_lib_z_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -compress2 (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_z_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_z_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 -echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 -if test $ac_cv_lib_z_compress2 = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBS="-lz $LIBS" - -else - LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB -fi - - echo "$as_me:$LINENO: checking for compress2" >&5 -echo $ECHO_N "checking for compress2... $ECHO_C" >&6 -if test "${ac_cv_func_compress2+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char compress2 (); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char compress2 (); -char (*f) (); - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_compress2) || defined (__stub___compress2) -choke me -#else -f = compress2; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_compress2=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_func_compress2=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_compress2" >&5 -echo "${ECHO_T}$ac_cv_func_compress2" >&6 -if test $ac_cv_func_compress2 = yes; then - HAVE_COMPRESS2="yes" -fi - - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find zlib library" >&5 -echo "$as_me: error: couldn't find zlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; -esac - -if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_DEFLATE 1 -_ACEOF - -fi - - -# Check whether --with-szlib or --without-szlib was given. -if test "${with_szlib+set}" = set; then - withval="$with_szlib" - -else - withval=yes -fi; - -case $withval in - yes) - HAVE_SZLIB="yes" - -for ac_header in szlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_SZLIB_H="yes" -fi - -done - - -echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5 -echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6 -if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -SZ_BufftoBuffCompress (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_sz_SZ_BufftoBuffCompress=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_sz_SZ_BufftoBuffCompress=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5 -echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6 -if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSZ 1 -_ACEOF - - LIBS="-lsz $LIBS" - -else - unset HAVE_SZLIB -fi - - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5 -echo "$as_me: error: couldn't find szlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; - no) - HAVE_SZLIB="no" - echo "$as_me:$LINENO: checking for szlib" >&5 -echo $ECHO_N "checking for szlib... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: suppressed" >&5 -echo "${ECHO_T}suppressed" >&6 - ;; - *) - HAVE_SZLIB="yes" - case "$withval" in - *,*) - szlib_inc="`echo $withval |cut -f1 -d,`" - szlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - szlib_inc="$withval/include" - szlib_lib="$withval/lib" - fi - ;; - esac - - if test "X$szlib_inc" = "X/usr/include"; then - szlib_inc="" - fi - if test "X$szlib_lib" = "X/usr/lib"; then - szlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$szlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$szlib_inc" - fi - - -for ac_header in szlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - HAVE_SZLIB_H="yes" -else - CPPFLAGS="$saved_CPPFLAGS" -fi - -done - - - if test -n "$szlib_lib"; then - LDFLAGS="$LDFLAGS -L$szlib_lib" - fi - - -echo "$as_me:$LINENO: checking for SZ_BufftoBuffCompress in -lsz" >&5 -echo $ECHO_N "checking for SZ_BufftoBuffCompress in -lsz... $ECHO_C" >&6 -if test "${ac_cv_lib_sz_SZ_BufftoBuffCompress+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsz $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char SZ_BufftoBuffCompress (); -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -SZ_BufftoBuffCompress (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_sz_SZ_BufftoBuffCompress=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_cv_lib_sz_SZ_BufftoBuffCompress=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_sz_SZ_BufftoBuffCompress" >&5 -echo "${ECHO_T}$ac_cv_lib_sz_SZ_BufftoBuffCompress" >&6 -if test $ac_cv_lib_sz_SZ_BufftoBuffCompress = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBSZ 1 -_ACEOF - - LIBS="-lsz $LIBS" - -else - LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB -fi - - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - { { echo "$as_me:$LINENO: error: couldn't find szlib library" >&5 -echo "$as_me: error: couldn't find szlib library" >&2;} - { (exit 1); exit 1; }; } - fi - ;; -esac - -if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_SZIP 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for Stream Virtual File Driver support" >&5 -echo $ECHO_N "checking for Stream Virtual File Driver support... $ECHO_C" >&6 -# Check whether --enable-stream-vfd or --disable-stream-vfd was given. -if test "${enable_stream_vfd+set}" = set; then - enableval="$enable_stream_vfd" - STREAM_VFD=$enableval -fi; - -if test "$STREAM_VFD" = "yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - - -for ac_header in netinet/tcp.h sys/filio.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STREAM 1 -_ACEOF - - - echo "$as_me:$LINENO: checking if socklen_t is defined" >&5 -echo $ECHO_N "checking if socklen_t is defined... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -socklen_t foo; return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_SOCKLEN_T 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me:$LINENO: result: not configured" >&5 -echo "${ECHO_T}not configured" >&6 -fi - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overriden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if cmp -s $cache_file confcache; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -FFLAGS_saved=$FFLAGS -FFLAGS="$FFLAGS -I." - -echo "$as_me:$LINENO: checking if compiler supports -I. option" >&5 -echo $ECHO_N "checking if compiler supports -I. option... $ECHO_C" >&6 - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - : - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - FFLAGS="$FFLAGS_saved" -fi -cd .. -rm -rf conftest* - - - - - - - -case "$F9X" in - *mpif90*) - PARALLEL=mpif90 - echo "$as_me:$LINENO: checking for mpirun" >&5 -echo $ECHO_N "checking for mpirun... $ECHO_C" >&6 - - cmd=`echo $F9X |cut -f1 -d' '` - if (echo $cmd |grep / >/dev/null); then - path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`" - else - for path in `echo $PATH |tr : ' '`; do - if test -x $path/$cmd; then - break; - fi - done - fi - - if test -x $path/mpirun; then - echo "$as_me:$LINENO: result: $path/mpirun" >&5 -echo "${ECHO_T}$path/mpirun" >&6 - RUNSERIAL="${RUNSERIAL:-none}" - - if test -z "$RUNPARALLEL"; then - RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}" - fi - else - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 - fi - ;; - - *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*) - PARALLEL="$F9X" - ;; - - *) - ;; -esac - -echo "$as_me:$LINENO: checking for I/O filters" >&5 -echo $ECHO_N "checking for I/O filters... $ECHO_C" >&6 -# Check whether --enable-filters or --disable-filters was given. -if test "${enable_filters+set}" = set; then - enableval="$enable_filters" - FILTERS=$enableval -fi; - - -all_filters="shuffle,fletcher32" -case "X-$FILTERS" in - X-|X-all) - FILTERS=$all_filters - echo "$as_me:$LINENO: result: all ($FILTERS)" >&5 -echo "${ECHO_T}all ($FILTERS)" >&6 - ;; - X-no|X-none) - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 - FILTERS="none" - ;; - *) - echo "$as_me:$LINENO: result: $FILTERS" >&5 -echo "${ECHO_T}$FILTERS" >&6 - ;; -esac - -if test -n "$FILTERS"; then - for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do - if test $filter = "SHUFFLE"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_SHUFFLE 1 -_ACEOF - - fi - if test $filter = "FLETCHER32"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FILTER_FLETCHER32 1 -_ACEOF - - fi - done -fi - -# Check whether --enable-parallel or --disable-parallel was given. -if test "${enable_parallel+set}" = set; then - enableval="$enable_parallel" - -fi; - -echo "$as_me:$LINENO: checking for parallel support files" >&5 -echo $ECHO_N "checking for parallel support files... $ECHO_C" >&6 -case "X-$enable_parallel" in - X-|X-no|X-none) - echo "$as_me:$LINENO: result: skipped" >&5 -echo "${ECHO_T}skipped" >&6 - ;; - - X-yes) - echo "$as_me:$LINENO: result: provided by compiler" >&5 -echo "${ECHO_T}provided by compiler" >&6 - PARALLEL=yes - - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - -else - : - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - -else - LIBS="$saved_LIBS" - PARALLEL=no -fi -cd .. -rm -rf conftest* - -fi -cd .. -rm -rf conftest* - - - if test "X$PARALLEL" = "Xyes"; then - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - -else - : - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - -else - LIBS="$saved_LIBS" - PARALLEL=no -fi -cd .. -rm -rf conftest* - -fi -cd .. -rm -rf conftest* - - fi - - if test "X$PARALLEL" = "Xyes" && test -z "$RUNPARALLEL"; then - RUNPARALLEL="mpirun -np \$\${NPROCS:=2}" - fi - ;; - - *) - echo "$as_me:$LINENO: result: error" >&5 -echo "${ECHO_T}error" >&6 - { { echo "$as_me:$LINENO: error: \'$enable_parallel\' is not a valid parallel search type" >&5 -echo "$as_me: error: \'$enable_parallel\' is not a valid parallel search type" >&2;} - { (exit 1); exit 1; }; } - ;; -esac - -if test -n "$PARALLEL"; then - TESTPARALLEL=testpar -fi - -ADD_PARALLEL_FILES="no" -if test -n "$PARALLEL"; then - echo "$as_me:$LINENO: checking prefix for running on one processor" >&5 -echo $ECHO_N "checking prefix for running on one processor... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: $RUNSERIAL" >&5 -echo "${ECHO_T}$RUNSERIAL" >&6 - echo "$as_me:$LINENO: checking prefix for running in parallel" >&5 -echo $ECHO_N "checking prefix for running in parallel... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: $RUNPARALLEL" >&5 -echo "${ECHO_T}$RUNPARALLEL" >&6 - - echo "$as_me:$LINENO: checking whether a simple MPI-IO program can be linked" >&5 -echo $ECHO_N "checking whether a simple MPI-IO program can be linked... $ECHO_C" >&6 - - -ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * - -cat >conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - : - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - : - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - { { echo "$as_me:$LINENO: error: 'unable to link a simple MPI-IO application'" >&5 -echo "$as_me: error: 'unable to link a simple MPI-IO application'" >&2;} - { (exit 1); exit 1; }; } -fi -cd .. -rm -rf conftest* - - - if test -z "$RUNPARALLEL"; then - { { echo "$as_me:$LINENO: error: no way to run a parallel program" >&5 -echo "$as_me: error: no way to run a parallel program" >&2;} - { (exit 1); exit 1; }; } - fi - - if test "X$RUNSERIAL" = "Xnone"; then - RUNSERIAL= - fi - if test "X$RUNPARALLEL" = "Xnone"; then - RUNPARALLEL= - fi - - ADD_PARALLEL_FILES="yes" - - echo "$as_me:$LINENO: checking for MPI_Comm_c2f and MPI_Comm_f2c functions" >&5 -echo $ECHO_N "checking for MPI_Comm_c2f and MPI_Comm_f2c functions... $ECHO_C" >&6 - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -MPI_Comm c_comm; MPI_Comm_c2f(c_comm) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MPI_MULTI_LANG_Comm 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - - echo "$as_me:$LINENO: checking for MPI_Info_c2f and MPI_Info_f2c functions" >&5 -echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" - -#include - -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -MPI_Info c_info; MPI_Info_c2f(c_info) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MPI_MULTI_LANG_Info 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - - ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - -fi - - -echo "$as_me:$LINENO: checking make" >&5 -echo $ECHO_N "checking make... $ECHO_C" >&6 - -if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ - sed -n 1p|cut -c1-8`" = "GNU Make"; then - echo "$as_me:$LINENO: result: GNU make" >&5 -echo "${ECHO_T}GNU make" >&6 - GMAKE=yes - if test "X$GCC" = "Xyes"; then - DEPEND=config/depend1 - else - DEPEND=config/depend2 - fi -else - echo "$as_me:$LINENO: result: generic" >&5 -echo "${ECHO_T}generic" >&6 -fi - -if test -z "$DEPEND"; then - echo "$as_me:$LINENO: checking how to include a makefile" >&5 -echo $ECHO_N "checking how to include a makefile... $ECHO_C" >&6 - - cat >makeinc <' >maketest - if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - echo "$as_me:$LINENO: result: .include " >&5 -echo "${ECHO_T}.include " >&6 - DEPEND=config/depend3 - break - fi - - echo 'include makeinc' >maketest - if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - echo "$as_me:$LINENO: result: include FILE" >&5 -echo "${ECHO_T}include FILE" >&6 - DEPEND=config/depend4 - break; - fi - - echo "$as_me:$LINENO: result: you have a deficient make command" >&5 -echo "${ECHO_T}you have a deficient make command" >&6 - DEPEND=config/dependN - break - done - rm makeinc maketest -fi - -# Check whether --enable-gpfs or --disable-gpfs was given. -if test "${enable_gpfs+set}" = set; then - enableval="$enable_gpfs" - -else - enableval=no -fi; - -case "X-$enableval" in - X-yes) - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -for ac_header in gpfs.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - egrep -v '^ *\+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - echo "$as_me:$LINENO: checking for GPFS support" >&5 -echo $ECHO_N "checking for GPFS support... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -#include "confdefs.h" -#include -#ifdef F77_DUMMY_MAIN -# ifdef __cplusplus - extern "C" -# endif - int F77_DUMMY_MAIN() { return 1; } -#endif -int -main () -{ -int fd = 0; gpfs_fcntl(fd, (void *)0); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GPFS 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - LIBS="$LIBS -lgpfs" - GPFS="yes" -else - echo "$as_me: failed program was:" >&5 -cat conftest.$ac_ext >&5 -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - GPFS="no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi - -done - - - ac_ext=f90 -ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' -ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' -cross_compiling=$ac_cv_prog_f9x_cross - - ;; - X-no|*) - echo "$as_me:$LINENO: checking for gpfs" >&5 -echo $ECHO_N "checking for gpfs... $ECHO_C" >&6 - echo "$as_me:$LINENO: result: suppressed" >&5 -echo "${ECHO_T}suppressed" >&6 - ;; -esac - -rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files - - -H5_VERSION="`cut -d' ' -f3 $srcdir/../README.txt | head -1`" - - - CONFIG_DATE="`date`" - - CONFIG_USER="`whoami`@`hostname`" -if test -n "$ORGANIZATION"; then - CONFIG_USER="$CONFIG_USER at $ORGANIZATION" -fi - - - - -if test "X$ac_cv_c_bigendian" = "Xyes"; then - BYTESEX="big-endian" -else - BYTESEX="little-endian" -fi - -PARALLEL=${PARALLEL:-no} - - -if `echo $CC | grep / 2>&1 /dev/null`; then - CC_VERSION="$CC" -else - CC_VERSION="$CC"; - for x in `echo $PATH | sed -e 's/:/ /g'`; do - if test -x $x/$CC; then - CC_VERSION="$x/$CC" - break - fi - done -fi -if test -n "$cc_vendor" && test -n "$cc_version"; then - CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)" -fi - - -if `echo $F9X | grep / 2>&1 /dev/null`; then - FC_VERSION="$F9X" -else - FC_VERSION="$F9X"; - for x in `echo $PATH | sed -e 's/:/ /g'`; do - if test -x $x/$F9X; then - FC_VERSION="$x/$F9X" - break - fi - done -fi - - DYNAMIC_DIRS="" -if test -n "$LDFLAGS"; then - for d in $LDFLAGS ; do - case "$d" in - -L*) - d=`echo $d | sed -e 's/-L//g'` - case "$d" in - .*) - d=${ROOT}/$d - ;; - esac - DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS" - ;; - esac - done -fi - - COMMENCE=config/commence - CONCLUDE=config/conclude - -if test -z "$SEARCH"; then - SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' - cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' - SEARCH="$SEARCH_RULE`eval $cmd`" -fi - -if test "X$GMAKE" = "Xyes"; then - SETX=":" -else - SETX="set -x" -fi - -rm -f conftest conftest.o conftest.c core core.* *.core dummy.o - - -mkdir ./config >/dev/null 2>&1 -touch ./config/stamp1 - -PARALLEL_MAKE= - -if test -n "$TESTPARALLEL"; then - PARALLEL_MAKE=$TESTPARALLEL/Makefile -fi - -saved_no_create=$no_create -no_create=yes -ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/h5fc src/H5fortran_types.f90 src/libhdf5_fortran.settings src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overriden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if cmp -s $cache_file confcache; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -DEFS=-DHAVE_CONFIG_H - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# NLS nuisances. -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - -(set +x; test -n "`(LANG=C; export LANG) 2>&1`") && - { $as_unset LANG || test "${LANG+set}" != set; } || - { LANG=C; export LANG; } -(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && - { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || - { LC_ALL=C; export LC_ALL; } -(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && - { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || - { LC_TIME=C; export LC_TIME; } -(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && - { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || - { LC_CTYPE=C; export LC_CTYPE; } -(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && - { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || - { LANGUAGE=C; export LANGUAGE; } -(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && - { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || - { LC_COLLATE=C; export LC_COLLATE; } -(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && - { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || - { LC_NUMERIC=C; export LC_NUMERIC; } -(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && - { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || - { LC_MESSAGES=C; export LC_MESSAGES; } - - -# Name of the executable. -as_me=`(basename "$0") 2>/dev/null || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conftest.sh - echo "exit 0" >>conftest.sh - chmod +x conftest.sh - if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conftest.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by HDF5 Fortran $as_me 1.7.1, which was -generated by GNU Autoconf 2.53. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -HDF5 Fortran config.status 1.7.1 -configured by $0, generated by GNU Autoconf 2.53, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - shift - set dummy "$ac_option" "$ac_optarg" ${1+"$@"} - shift - ;; - -*);; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_need_defaults=false;; - esac - - case $1 in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" - exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - shift - CONFIG_FILES="$CONFIG_FILES $1" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - shift - CONFIG_HEADERS="$CONFIG_HEADERS $1" - ac_need_defaults=false;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# - - - -_ACEOF - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "config/depend1" ) CONFIG_FILES="$CONFIG_FILES config/depend1" ;; - "config/depend2" ) CONFIG_FILES="$CONFIG_FILES config/depend2" ;; - "config/depend3" ) CONFIG_FILES="$CONFIG_FILES config/depend3" ;; - "config/depend4" ) CONFIG_FILES="$CONFIG_FILES config/depend4" ;; - "config/dependN" ) CONFIG_FILES="$CONFIG_FILES config/dependN" ;; - "config/commence" ) CONFIG_FILES="$CONFIG_FILES config/commence" ;; - "config/conclude" ) CONFIG_FILES="$CONFIG_FILES config/conclude" ;; - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/h5fc" ) CONFIG_FILES="$CONFIG_FILES src/h5fc" ;; - "src/H5fortran_types.f90" ) CONFIG_FILES="$CONFIG_FILES src/H5fortran_types.f90" ;; - "src/libhdf5_fortran.settings" ) CONFIG_FILES="$CONFIG_FILES src/libhdf5_fortran.settings" ;; - "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; - "$PARALLEL_MAKE" ) CONFIG_FILES="$CONFIG_FILES $PARALLEL_MAKE" ;; - "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; - "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; - "src/H5config_fortran.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/H5config_fortran.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/cs$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@FFLAGS@,$FFLAGS,;t t -s,@FSEARCH_DIRS@,$FSEARCH_DIRS,;t t -s,@R_LARGE@,$R_LARGE,;t t -s,@R_INTEGER@,$R_INTEGER,;t t -s,@HSIZE_T@,$HSIZE_T,;t t -s,@HSSIZE_T@,$HSSIZE_T,;t t -s,@HID_T@,$HID_T,;t t -s,@SIZE_T@,$SIZE_T,;t t -s,@OBJECT_NAMELEN_DEFAULT_F@,$OBJECT_NAMELEN_DEFAULT_F,;t t -s,@ROOT@,$ROOT,;t t -s,@F9XSUFFIXFLAG@,$F9XSUFFIXFLAG,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CPP@,$CPP,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@PERL@,$PERL,;t t -s,@AR@,$AR,;t t -s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t -s,@F9X@,$F9X,;t t -s,@F9XMODFLAG@,$F9XMODFLAG,;t t -s,@F9XMODEXT@,$F9XMODEXT,;t t -s,@PARALLEL@,$PARALLEL,;t t -s,@RUNSERIAL@,$RUNSERIAL,;t t -s,@RUNPARALLEL@,$RUNPARALLEL,;t t -s,@TESTPARALLEL@,$TESTPARALLEL,;t t -s,@FILTERS@,$FILTERS,;t t -s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t -/@DEPEND@/r $DEPEND -s,@DEPEND@,,;t t -s,@H5_VERSION@,$H5_VERSION,;t t -s,@CONFIG_DATE@,$CONFIG_DATE,;t t -s,@CONFIG_USER@,$CONFIG_USER,;t t -s,@CONFIG_MODE@,$CONFIG_MODE,;t t -s,@BYTESEX@,$BYTESEX,;t t -s,@CC_VERSION@,$CC_VERSION,;t t -s,@FC_VERSION@,$FC_VERSION,;t t -s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t -/@COMMENCE@/r $COMMENCE -s,@COMMENCE@,,;t t -/@CONCLUDE@/r $CONCLUDE -s,@CONCLUDE@,,;t t -s,@SEARCH@,$SEARCH,;t t -s,@SETX@,$SETX,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # egrep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if cmp -s $ac_file $tmp/config.h 2>/dev/null; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { case "$ac_dir" in - [\\/]* | ?:[\\/]* ) as_incr_dir=;; - *) as_incr_dir=.;; -esac -as_dummy="$ac_dir" -for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do - case $as_mkdir_dir in - # Skip DOS drivespec - ?:) as_incr_dir=$as_mkdir_dir ;; - *) - as_incr_dir=$as_incr_dir/$as_mkdir_dir - test -d "$as_incr_dir" || - mkdir "$as_incr_dir" || - { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; } - ;; - esac -done; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - default-1 ) - echo "creating src/H5pubconf_fortran.h" - sed 's/PACKAGE/FORTRAN_PACKAGE/' < src/H5config_fortran.h |\ - sed 's/#define /#define H5_/' |\ - sed 's/#undef /#undef H5_/' > pubconf_fortran - - if test ! -f src/H5pubconf_fortran.h; then - /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h - elif (diff pubconf_fortran src/H5pubconf_fortran.h >/dev/null); then - /bin/rm -f pubconf_fortran - echo "src/H5pubconf_fortran.h is unchanged" - else - /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h - fi - ;; - esac -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - exec 5>/dev/null - $SHELL $CONFIG_STATUS || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - -no_create=$saved_no_create - -touch ./config/stamp2 - -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - -chmod 755 src/h5fc diff --git a/fortran/configure.in b/fortran/configure.in deleted file mode 100644 index 26aaa34..0000000 --- a/fortran/configure.in +++ /dev/null @@ -1,1156 +0,0 @@ -dnl Process this file with autoconf to produce configure. -dnl -dnl Copyright by the Board of Trustees of the University of Illinois. -dnl All rights reserved. -dnl -dnl This file is part of HDF5. The full HDF5 copyright notice, including -dnl terms governing use, modification, and redistribution, is contained in -dnl the files COPYING and Copyright.html. COPYING can be found at the root -dnl of the source code distribution tree; Copyright.html can be found at the -dnl root level of an installed copy of the electronic HDF5 document set and -dnl is linked from the top-level documents page. It can also be found at -dnl http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -dnl access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. - -dnl ---------------------------------------------------------------------- -dnl Initialize configure. -dnl -AC_REVISION($Id$) - -dnl AC_INIT takes the name of the package, the version number, and an -dnl email address to report bugs. AC_CONFIG_SRCDIR takes a unique file -dnl as its argument. -dnl -dnl NOTE: Don't forget to change the version number here when we do a -dnl release!!! -dnl -AC_INIT([HDF5 Fortran], [1.7.1], [hdfhelp@ncsa.uiuc.edu]) -AC_CONFIG_SRCDIR([src/HDF5.f90]) -AC_CONFIG_HEADER([src/H5config_fortran.h]) - -AC_CONFIG_AUX_DIR([../bin]) - -AC_OUTPUT_COMMANDS([ - echo "creating src/H5pubconf_fortran.h" - sed 's/PACKAGE/FORTRAN_PACKAGE/' < src/H5config_fortran.h |\ - sed 's/#define /#define H5_/' |\ - sed 's/#undef /#undef H5_/' > pubconf_fortran - - if test ! -f src/H5pubconf_fortran.h; then - /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h - elif (diff pubconf_fortran src/H5pubconf_fortran.h >/dev/null); then - /bin/rm -f pubconf_fortran - echo "src/H5pubconf_fortran.h is unchanged" - else - /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h - fi -]) - -AC_CANONICAL_HOST -AC_SUBST(CPPFLAGS) -AC_SUBST(FFLAGS) -AC_SUBST(FSEARCH_DIRS) - -dnl ---------------------------------------------------------------------- -dnl HDF5 integer variables for the H5fortran_types.f90 file. -dnl -AC_SUBST(R_LARGE) -AC_SUBST(R_INTEGER) -AC_SUBST(HSIZE_T) -AC_SUBST(HSSIZE_T) -AC_SUBST(HID_T) -AC_SUBST(SIZE_T) -AC_SUBST(OBJECT_NAMELEN_DEFAULT_F) - -dnl ---------------------------------------------------------------------- -dnl Dump all shell variables values. -dnl -AC_MSG_CHECKING(shell variables initial values) -set >&5 -AC_MSG_RESULT(done) - -dnl ---------------------------------------------------------------------- -dnl Where is the root of the source tree. Give an absolute address so -dnl we can find it no matter which directory of the distribution is our -dnl current directory. The built-in pwd fails on some systems, but the -dnl /bin/pwd version works OK. -dnl -if test -x "/bin/pwd"; then - pwd=/bin/pwd -else - pwd=pwd -fi -AC_SUBST(ROOT) ROOT=`$pwd` - -dnl ---------------------------------------------------------------------- -dnl Check that the cache file was build on the same host as what we're -dnl running on now. -dnl -AC_CACHE_CHECK(for cached host,hdf5_cv_host,hdf5_cv_host="none"); -if test "X$hdf5_cv_host" = "Xnone"; then - hdf5_cv_host=$host -elif test "$hdf5_cv_host" != "$host"; then - echo "The config.cache file was generated on $hdf5_cv_host but" - echo "this is $host. Please remove that file and try again." - AC_MSG_ERROR(config.cache file is invalid) -fi - -dnl ---------------------------------------------------------------------- -dnl Source any special files that we need. These files normally aren't -dnl present but can be used by the maintainers to fine tune things like -dnl turning on debug or profiling flags for the compiler. The search order -dnl is: -dnl -dnl CPU-VENDOR-OS -dnl VENDOR-OS -dnl CPU-OS -dnl CPU-VENDOR -dnl OS -dnl VENDOR -dnl CPU -dnl -dnl If the `OS' ends with a version number then remove it. For instance, -dnl `freebsd3.1' would become `freebsd' -case "$host_os" in - aix4.*) - host_os_novers=aix4.x - ;; - aix5.*) - host_os_novers=aix5.x - ;; - freebsd*) - host_os_novers=freebsd - ;; - irix5.*) - host_os_novers=irix5.x - ;; - irix6.*) - host_os_novers=irix6.x - ;; - osf4.*) - host_os_novers=osf4.x - ;; - osf5.*) - host_os_novers=osf5.x - ;; - solaris2.*) - host_os_novers=solaris2.x - ;; - *) - host_os_novers=$host_os - ;; -esac - -host_config="none" -for f in $host_cpu-$host_vendor-$host_os \ - $host_cpu-$host_vendor-$host_os_novers \ - $host_vendor-$host_os \ - $host_vendor-$host_os_novers \ - $host_cpu-$host_os \ - $host_cpu-$host_os_novers \ - $host_cpu-$host_vendor \ - $host_os \ - $host_os_novers \ - $host_vendor \ - $host_cpu ; do - AC_MSG_CHECKING(for config $f) - if test -f $srcdir/config/$f; then - host_config=$srcdir/config/$f - AC_MSG_RESULT(found) - break - fi - AC_MSG_RESULT(no) -done -if test "X$host_config" != "Xnone"; then - CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" - . $host_config -fi - -AC_SUBST(F9XSUFFIXFLAG) - -dnl ---------------------------------------------------------------------- -dnl Check for programs. -dnl -AC_PROG_CC -AC_PROG_CPP dnl this is checked for when AC_HEADER_STDC is done -CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" -AC_PROG_MAKE_SET -AC_PROG_INSTALL -AM_PROG_LIBTOOL - -dnl ---------------------------------------------------------------------- -dnl Check if they have Perl installed on their system. We only need Perl -dnl if they're using a GNU compiler. -dnl -AC_SUBST(PERL) PERL="" -if test "X$GCC" = "Xyes"; then - AC_CHECK_PROGS(PERL, perl,, $PATH) -fi - -if test -z "$AR"; then - AC_CHECK_PROGS(AR,ar xar,:,$PATH) -fi -AC_SUBST(AR) - -dnl ---------------------------------------------------------------------- -dnl Sometimes makes think the `.PATH:' appearing before the first rule -dnl with an action should override the `all' default target. So we have -dnl to decide what the proper syntax is. -dnl -if test -z "$SEARCH"; then - AC_MSG_CHECKING(how make searches directories) - while true; do #for break - dnl The most common method is `VPATH=DIR1 DIR2 ...' - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=' ' - AC_MSG_RESULT([VPATH=DIR1 DIR2 ...]) - break - fi - - dnl The second most common method is like above except with the - dnl directories separated by colons. - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='VPATH=' - SEARCH_SEP=':' - AC_MSG_RESULT([VPATH=DIR1:DIR2:...]) - break - fi - - dnl pmake uses the construct `.PATH: DIR1 DIR2 - cat >maketest </dev/null 2>&1; then - SEARCH_RULE='.PATH: ' - SEARCH_SEP=' ' - AC_MSG_RESULT([.PATH: DIR1 DIR2 ...]) - break - fi - - dnl No way for make to search directories - SEARCH_RULE='## SEARCH DISABLED: ' - SEARCH_SEP=' ' - AC_MSG_RESULT([it doesn't]) - if test ! -f configure; then - AC_MSG_ERROR(${MAKE-make} requires the build and source directories to be the same) - fi - break - done - rm maketest -fi - -dnl ---------------------------------------------------------------------- -dnl Production flags? Save the value in $CONFIG_MODE so we have it for -dnl the record. -dnl -AC_MSG_CHECKING([for production mode]) -AC_ARG_ENABLE([production], - [AC_HELP_STRING([--enable-production], - [Determines how to run the compiler.])]) - -case "X-$enable_production" in - X-yes) - AC_MSG_RESULT("production") - - dnl Remove the "-g" flag from CFLAGS if it's in there. - dnl - CFLAGS_temp="" - if test -n "$CFLAGS"; then - for d in $CFLAGS ; do - if test "X$d" != "X-g"; then - CFLAGS_temp="$CFLAGS_temp $d" - fi - done - CFLAGS=$CFLAGS_temp - fi - - CONFIG_MODE=production - CFLAGS="$CFLAGS $PROD_CFLAGS" - CPPFLAGS="$CPPFLAGS $PROD_CPPFLAGS" - ;; - X-|X-no) - AC_MSG_RESULT("development") - CONFIG_MODE=development - CFLAGS="$CFLAGS $DEBUG_CFLAGS" - CPPFLAGS="$CPPFLAGS $DEBUG_CPPFLAGS" - ;; - X-pg|X-profile) - AC_MSG_RESULT("profile") - CONFIG_MODE=profile - CFLAGS="$CXXFLAGS $PROFILE_CFLAGS" - CPPFLAGS="$CPPFLAGS $PROFILE_CPPFLAGS" - ;; - *) - AC_MSG_RESULT("user-defined") - CONFIG_MODE="$X-enableval" - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Check for system libraries. -dnl -AC_CHECK_LIB([m], [ceil]) - -if test "`uname`" = "SunOS" -o "`uname -sr`" = "HP-UX B.11.00"; then - dnl ...for Solaris - AC_CHECK_LIB([socket], [socket]) - AC_CHECK_LIB([nsl], [xdr_int]) -fi - -dnl ---------------------------------------------------------------------- -dnl If we should build only static executables -dnl -AC_MSG_CHECKING([if should build only statically linked executables]) -AC_ARG_ENABLE([static_exec], - [AC_HELP_STRING([--enable-static-exec], - [Build only statically linked executables - [default=no]])], - STATIC_EXEC=$enableval) - -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - LT_STATIC_EXEC="-all-static" -else - echo "no" - LT_STATIC_EXEC="" -fi -AC_SUBST(LT_STATIC_EXEC) - -dnl ---------------------------------------------------------------------- -dnl Test for 64bit stuff before the data types and their sizes. The -dnl result could effect the outcome of the sizeof macros below. -dnl -case "$host_cpu-$host_vendor-$host_os" in - *linux*) - dnl ---------------------------------------------------------------------- - dnl Enable large file support on linux? Store the result in the LINUX_LFS - dnl variable for posterity - AC_ARG_ENABLE([linux-lfs], - [AC_HELP_STRING([--enable-linux-lfs], - [Enable support for large (64-bit) - files on Linux. [default=check]])]) - - LINUX_LFS="no" - case "X-$enable_linux_lfs" in - X-yes) - LINUX_LFS=yes - ;; - X-no) - ;; - X-|*) - MAJOR_VER="`uname -r | cut -d '.' -f1`" - MINOR_VER="`uname -r | cut -d '.' -f2`" - - if test ${MAJOR_VER} -gt 2 -o ${MAJOR_VER} -eq 2 -a ${MINOR_VER} -ge 4; then - LINUX_LFS="yes" - fi - ;; - esac - - AC_MSG_CHECKING([for large file support mode on Linux]) - if test "X$LINUX_LFS" = "Xyes"; then - AC_MSG_RESULT([enabled]) - CPPFLAGS="-D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $CPPFLAGS" - else - AC_MSG_RESULT([disabled]) - fi - - dnl Add POSIX support on Linux systems, so defines - dnl __USE_POSIX, which is required to get the prototype for fdopen - dnl defined correctly in - CPPFLAGS="-D_POSIX_SOURCE $CPPFLAGS" - - dnl Also add BSD support on Linux systems, so defines - dnl __USE_BSD, which is required to get the prototype for strdup - dnl defined correctly in and snprintf & vsnprintf defined - dnl correctly in - CPPFLAGS="-D_BSD_SOURCE $CPPFLAGS" - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Check for a Fortran 9X compiler, how to optimize it, and how to -dnl include modules. -dnl -AC_PROG_F9X -dnl AC_F9X_OPT_FLAGS -AC_F9X_MODS - -dnl Change back to the C language -AC_LANG_C - -dnl ---------------------------------------------------------------------- -dnl Checks for libraries. -dnl - -dnl ---------------------------------------------------------------------- -dnl Is the GNU zlib present? It has a header file `zlib.h' and a library -dnl `-lz' and their locations might be specified with the `--with-zlib' -dnl command-line switch. The value is an include path and/or a library path. -dnl If the library path is specified then it must be preceded by a comma. -dnl -AC_ARG_WITH([zlib], - [AC_HELP_STRING([--with-zlib=DIR], - [Use zlib library for external deflate I/O - filter [default=yes]])],, - withval=yes) - -case $withval in - yes) - HAVE_ZLIB="yes" - AC_CHECK_HEADERS([zlib.h], [HAVE_ZLIB_H="yes"]) - AC_CHECK_LIB([z], [compress2],, [unset HAVE_ZLIB]) - AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find zlib library]) - fi - ;; - no) - HAVE_ZLIB="no" - AC_MSG_CHECKING([for GNU zlib]) - AC_MSG_RESULT([suppressed]) - ;; - *) - HAVE_ZLIB="yes" - case "$withval" in - *,*) - zlib_inc="`echo $withval |cut -f1 -d,`" - zlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - zlib_inc="$withval/include" - zlib_lib="$withval/lib" - fi - ;; - esac - - dnl Trying to include -I/usr/include and -L/usr/lib is redundant and - dnl can mess some compilers up. - if test "X$zlib_inc" = "X/usr/include"; then - zlib_inc="" - fi - if test "X$zlib_lib" = "X/usr/lib"; then - zlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$zlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$zlib_inc" - fi - - AC_CHECK_HEADERS([zlib.h], - [HAVE_ZLIB_H="yes"], - [CPPFLAGS="$saved_CPPFLAGS"]) - - if test -n "$zlib_lib"; then - LDFLAGS="$LDFLAGS -L$zlib_lib" - fi - - AC_CHECK_LIB([z], [compress2],, - [LDFLAGS="$saved_LDFLAGS"; unset HAVE_ZLIB]) - AC_CHECK_FUNC([compress2], [HAVE_COMPRESS2="yes"]) - - if test -z "$HAVE_ZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find zlib library]) - fi - ;; -esac - -if test "x$HAVE_ZLIB" = "xyes" -a "x$HAVE_ZLIB_H" = "xyes" -a "x$HAVE_COMPRESS2" = "xyes"; then - AC_DEFINE(HAVE_FILTER_DEFLATE, 1, - [Define if support for deflate filter is enabled]) -fi - -dnl ---------------------------------------------------------------------- -dnl Is the szlib present? It has a header file `szlib.h' and a library -dnl `-lsz' and their locations might be specified with the `--with-szlib' -dnl command-line switch. The value is an include path and/or a library path. -dnl If the library path is specified then it must be preceded by a comma. -dnl -AC_ARG_WITH([szlib], - [AC_HELP_STRING([--with-szlib=DIR], - [Use szlib library for external szlib I/O - filter [default=yes]])],, - withval=yes) - -case $withval in - yes) - HAVE_SZLIB="yes" - AC_CHECK_HEADERS([szlib.h], [HAVE_SZLIB_H="yes"]) - AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, [unset HAVE_SZLIB]) - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find szlib library]) - fi - ;; - no) - HAVE_SZLIB="no" - AC_MSG_CHECKING([for szlib]) - AC_MSG_RESULT([suppressed]) - ;; - *) - HAVE_SZLIB="yes" - case "$withval" in - *,*) - szlib_inc="`echo $withval |cut -f1 -d,`" - szlib_lib="`echo $withval |cut -f2 -d, -s`" - ;; - *) - if test -n "$withval"; then - szlib_inc="$withval/include" - szlib_lib="$withval/lib" - fi - ;; - esac - - dnl Trying to include -I/usr/include and -L/usr/lib is redundant and - dnl can mess some compilers up. - if test "X$szlib_inc" = "X/usr/include"; then - szlib_inc="" - fi - if test "X$szlib_lib" = "X/usr/lib"; then - szlib_lib="" - fi - - saved_CPPFLAGS="$CPPFLAGS" - saved_LDFLAGS="$LDFLAGS" - - if test -n "$szlib_inc"; then - CPPFLAGS="$CPPFLAGS -I$szlib_inc" - fi - - AC_CHECK_HEADERS([szlib.h], - [HAVE_SZLIB_H="yes"], - [CPPFLAGS="$saved_CPPFLAGS"]) - - if test -n "$szlib_lib"; then - LDFLAGS="$LDFLAGS -L$szlib_lib" - fi - - AC_CHECK_LIB([sz], [SZ_BufftoBuffCompress],, - [LDFLAGS="$saved_LDFLAGS"; unset HAVE_SZLIB]) - - if test -z "$HAVE_SZLIB" -a -n "$HDF5_CONFIG_ABORT"; then - AC_MSG_ERROR([couldn't find szlib library]) - fi - ;; -esac - -if test "x$HAVE_SZLIB" = "xyes" -a "x$HAVE_SZLIB_H" = "xyes"; then - AC_DEFINE(HAVE_FILTER_SZIP, 1, - [Define if support for szip filter is enabled]) -fi - -dnl ---------------------------------------------------------------------- -dnl Should the Stream Virtual File Driver be compiled in ? -dnl -AC_MSG_CHECKING([for Stream Virtual File Driver support]) -AC_ARG_ENABLE([stream-vfd], - [AC_HELP_STRING([--enable-stream-vfd], - [Build the Stream Virtual File Driver - [default=no]])], - [STREAM_VFD=$enableval]) - -if test "$STREAM_VFD" = "yes"; then - AC_MSG_RESULT([yes]) - AC_CHECK_HEADERS([netinet/tcp.h sys/filio.h]) - AC_DEFINE([HAVE_STREAM], [1], - [Define if the stream virtual file driver should be compiled]) - - dnl Check if 'socklen_t' available - AC_MSG_CHECKING([if socklen_t is defined]) - AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif - ], - [socklen_t foo; return 0;], - AC_DEFINE([HAVE_SOCKLEN_T], 1, - [Define if \`socklen_t' is defined]) - AC_MSG_RESULT([yes]), - AC_MSG_RESULT([no]) - ) -else - AC_MSG_RESULT([not configured]) -fi - -dnl ---------------------------------------------------------------------- -dnl Checks for header files. -dnl - -dnl Checkpoint the cache -AC_CACHE_SAVE - -dnl Change back to the Fortran 90 language -AC_LANG_FORTRAN9X - -dnl See if the compiler will support the "-I." option -FFLAGS_saved=$FFLAGS -FFLAGS="$FFLAGS -I." - -AC_MSG_CHECKING(if compiler supports -I. option) -AC_TRY_FCOMPILE([ - program conftest - end -], AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) - FFLAGS="$FFLAGS_saved") - -dnl ---------------------------------------------------------------------- -dnl The following variables are used to distinguish between building a -dnl serial and parallel library. -dnl -dnl HAVE_PARALLEL -- defined in H5config.h if we are building -dnl a parallel library even if configure wasn't -dnl able to find some header file or library that -dnl might be required. This is defined if the -dnl compiler looks like a parallel compiler (e.g., -dnl mpif90 or mpf90) or if the user explicitly states -dnl that a parallel library is being built by supplying -dnl the `--enable-parallel' configure switch. -dnl -dnl PARALLEL -- This variable is set to a non-null value if -dnl configure thinks we're compiling a parallel -dnl version of the library. -dnl -dnl RUNSERIAL -- This is a command which will be prepended to -dnl the executable name to run the executable using -dnl a single process. For serial versions of the -dnl library this will normally be empty. For parallel -dnl versions it might be something like `mpirun -np 1'. -dnl The value of this variable is substituted in *.in -dnl files. -dnl -dnl RUNPARALLEL -- This is a command which will be prepended to -dnl the executable name to run the executable on -dnl multiple processors. For the serial library the -dnl value will normally be the empty string. For -dnl parallel library it should be something like -dnl `mpi -np $$NPROCS' where NPROCS will eventually -dnl contain the number of processors on which to run -dnl the executable (the double dollarsigns are to -dnl protect the expansion until make executes the -dnl command). The value of this variable is -dnl substituted in *.in files. -dnl -AC_SUBST(PARALLEL) -AC_SUBST(RUNSERIAL) -AC_SUBST(RUNPARALLEL) -AC_SUBST(TESTPARALLEL) - -dnl ---------------------------------------------------------------------- -dnl If the compiler is obviously a parallel compiler then we're building -dnl a parallel version of hdf5 and should define HAVE_PARALLEL. Furthermore, -dnl the name of the compiler might tell us how to run the resulting -dnl executable. For `mpif90' the executable should be run with `mpirun' -dnl from the same directory as mpif90 if it exists. -dnl -case "$F9X" in - *mpif90*) - dnl The mpich compiler. Use mpirun from the same directory if it - dnl exists. - PARALLEL=mpif90 - AC_MSG_CHECKING(for mpirun) - - dnl Find the path where mpif90 is located. - cmd=`echo $F9X |cut -f1 -d' '` - if (echo $cmd |grep / >/dev/null); then - path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`" - else - for path in `echo $PATH |tr : ' '`; do - if test -x $path/$cmd; then - break; - fi - done - fi - - dnl Is there an mpirun at that path? - if test -x $path/mpirun; then - AC_MSG_RESULT($path/mpirun) - RUNSERIAL="${RUNSERIAL:-none}" - - if test -z "$RUNPARALLEL"; then - RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}" - fi - else - AC_MSG_RESULT(none) - fi - ;; - - *mpxlf* | *mpxlf_r* | *mpxlf90* | *mpxlf90_r* | *mpxlf95* | *mpxlf95_r*) - dnl The IBM compiler - PARALLEL="$F9X" - ;; - - *) - dnl Probably not a parallel compiler, but if `--enable-parallel' - dnl is defined below then we're still building a parallel hdf5. - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Turn on internal I/O filters by setting macros in header files -dnl Internal I/O filters are contained entirely within the library and do -dnl not depend on external headers or libraries. The shuffle filter is -dnl an example of an internal filter, while the gzip filter is an example of -dnl an external filter. Each external filter is controlled with an -dnl "--with-foo=" configure flag. -dnl -AC_MSG_CHECKING(for I/O filters) -AC_ARG_ENABLE([filters], - [AC_HELP_STRING([--enable-filters=all], - [Turn on all internal I/O filters. One may - also specify a comma-separated list of filters - or the word no. The default is all internal - I/O filters.])], - [FILTERS=$enableval]) - -AC_SUBST([FILTERS]) -dnl Eventually: all_filters="shuffle,foo,bar,baz" -all_filters="shuffle,fletcher32" -case "X-$FILTERS" in - X-|X-all) - FILTERS=$all_filters - AC_MSG_RESULT(all ($FILTERS)) - ;; - X-no|X-none) - AC_MSG_RESULT(none) - FILTERS="none" - ;; - *) - AC_MSG_RESULT($FILTERS) - ;; -esac - -if test -n "$FILTERS"; then - for filter in `echo $FILTERS | tr 'a-z,' 'A-Z '`; do -dnl ---------------------------------------------------------------------- -dnl Have to use separate 'if' construct for each filter, so that autoheader -dnl can detect the AC_DEFINE for each one... -dnl - if test $filter = "SHUFFLE"; then - AC_DEFINE(HAVE_FILTER_SHUFFLE, 1, - [Define if support for shuffle filter is enabled]) - fi - if test $filter = "FLETCHER32"; then - AC_DEFINE(HAVE_FILTER_FLETCHER32, 1, - [Define if support for Fletcher32 checksum is enabled]) - fi - done -fi - -dnl ---------------------------------------------------------------------- -dnl What header files and libraries do we have to look for for parallel -dnl support? For the most part, search paths are already specified with -dnl CPPFLAGS and LDFLAGS or are known to the compiler. If the user says -dnl `--disable-parallel' but specifies a known parallel compiler (like mpicc -dnl or mpcc) then parallel support is enabled but configure doesn't search -dnl for any parallel header files or libraries. -dnl -AC_ARG_ENABLE([parallel], - [AC_HELP_STRING([--enable-parallel], - [Search for MPI-IO and MPI support files])]) - -AC_MSG_CHECKING(for parallel support files) -case "X-$enable_parallel" in - X-|X-no|X-none) - dnl Either we are not compiling for parallel or the header and library - dnl files and locations are known to the compiler (this is the case - dnl for a correct installation of mpicc for instance). - AC_MSG_RESULT(skipped) - ;; - - X-yes) - dnl We want to compile a parallel library with a compiler that - dnl may already know how to link with MPI and MPI-IO. - AC_MSG_RESULT(provided by compiler) - PARALLEL=yes - - dnl Try link a simple MPI program. If fail, try again with -lmpi. - AC_TRY_FLINK(mpif.h, [ - call mpi_file_open( ierr )],, - AC_CHECK_FLIB(mpi, [ - include 'mpif.h' - call mpi_file_open( ierr )],, PARALLEL=no)) - - dnl Then try link a simple MPI-IO program. If fail, try again with - dnl -lmpio. - if test "X$PARALLEL" = "Xyes"; then - AC_TRY_FLINK(mpif.h, [ - call mpi_file_open( ierr )],, - AC_CHECK_FLIB(mpio, [ - include 'mpif.h' - call mpi_file_open( ierr )],, PARALLEL=no)) - fi - - dnl Set RUNPARALLEL to mpirun if not set yet. - if test "X$PARALLEL" = "Xyes" && test -z "$RUNPARALLEL"; then - RUNPARALLEL="mpirun -np \$\${NPROCS:=2}" - fi - ;; - - *) - AC_MSG_RESULT(error) - AC_MSG_ERROR(\'$enable_parallel\' is not a valid parallel search type) - ;; -esac - -dnl ---------------------------------------------------------------------- -dnl Should the `testpar' directory participate in the build? -dnl -if test -n "$PARALLEL"; then - TESTPARALLEL=testpar -fi - -dnl ---------------------------------------------------------------------- -dnl Print some other parallel information and do some sanity checks. -dnl -ADD_PARALLEL_FILES="no" -if test -n "$PARALLEL"; then - dnl Display what we found about running programs - AC_MSG_CHECKING(prefix for running on one processor) - AC_MSG_RESULT($RUNSERIAL) - AC_MSG_CHECKING(prefix for running in parallel) - AC_MSG_RESULT($RUNPARALLEL) - - dnl Check that we can link a simple MPI and MPI-IO application - AC_MSG_CHECKING(whether a simple MPI-IO program can be linked) - AC_TRY_FLINK(mpif.h,[ - call mpi_file_open( ierr )], - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) - AC_MSG_ERROR('unable to link a simple MPI-IO application')) - - dnl There *must* be some way to run in parallel even if it's just the - dnl word `none'. - if test -z "$RUNPARALLEL"; then - AC_MSG_ERROR(no way to run a parallel program) - fi - - dnl If RUNSERIAL or RUNPARALLEL is the word `none' then replace it with - dnl the empty string. - if test "X$RUNSERIAL" = "Xnone"; then - RUNSERIAL= - fi - if test "X$RUNPARALLEL" = "Xnone"; then - RUNPARALLEL= - fi - - ADD_PARALLEL_FILES="yes" - - AC_MSG_CHECKING([for MPI_Comm_c2f and MPI_Comm_f2c functions]) - - dnl Change to the C language - AC_LANG_C - - AC_TRY_LINK([ -#include - ], - [MPI_Comm c_comm; MPI_Comm_c2f(c_comm)], - AC_DEFINE(HAVE_MPI_MULTI_LANG_Comm, 1, - [Define if \`MPI_Comm_c2f' and \`MPI_Comm_f2c' exists]) - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) - ) - - AC_MSG_CHECKING([for MPI_Info_c2f and MPI_Info_f2c functions]) - AC_TRY_LINK([ -#include - ], - [MPI_Info c_info; MPI_Info_c2f(c_info)], - AC_DEFINE(HAVE_MPI_MULTI_LANG_Info, 1, - [Define if \`MPI_Info_c2f' and \`MPI_Info_f2c' exists]) - AC_MSG_RESULT(yes), - AC_MSG_RESULT(no) - ) - - dnl Change to the Fortran 90 language - AC_LANG_FORTRAN9X -fi -AC_SUBST(ADD_PARALLEL_FILES) - -AC_MSG_CHECKING(make) -AC_SUBST_FILE(DEPEND) -if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ - sed -n 1p|cut -c1-8`" = "GNU Make"; then - AC_MSG_RESULT(GNU make) - GMAKE=yes - if test "X$GCC" = "Xyes"; then - DEPEND=config/depend1 - else - DEPEND=config/depend2 - fi -else - AC_MSG_RESULT(generic) -fi - -dnl How do we include another file into a Makefile? -if test -z "$DEPEND"; then - AC_MSG_CHECKING(how to include a makefile) - - dnl The include file contains the target for `foo' - cat >makeinc <' >maketest - if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - AC_MSG_RESULT([.include ]) - DEPEND=config/depend3 - break - fi - - dnl Most make's use `include FILE' - echo 'include makeinc' >maketest - if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then - AC_MSG_RESULT(include FILE) - DEPEND=config/depend4 - break; - fi - - dnl default - AC_MSG_RESULT(you have a deficient make command) - DEPEND=config/dependN - break - done - rm makeinc maketest -fi - -dnl ---------------------------------------------------------------------- -dnl Checking to see if GPFS is available on this filesystem -dnl -AC_ARG_ENABLE([gpfs], - [AC_HELP_STRING([--enable-gpfs], - [Enable GPFS hints for the MPI/POSIX file - driver. [default=no]])],, - [enableval=no]) - -case "X-$enableval" in - X-yes) - dnl Change to the C language - AC_LANG_C - - AC_CHECK_HEADERS([gpfs.h], - AC_MSG_CHECKING([for GPFS support]) - AC_TRY_COMPILE([#include ], - [int fd = 0; gpfs_fcntl(fd, (void *)0);], - AC_DEFINE(HAVE_GPFS, 1, - [Define if we have GPFS support]) - AC_MSG_RESULT(yes) - LIBS="$LIBS -lgpfs" - GPFS="yes", - AC_MSG_RESULT(no) - GPFS="no")) - - dnl Change back to the Fortran 90 language - AC_LANG_FORTRAN9X - ;; - X-no|*) - AC_MSG_CHECKING([for gpfs]) - AC_MSG_RESULT([suppressed]) - ;; -esac - -dnl Some cleanup stuff -rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files - -dnl ---------------------------------------------------------------------- -dnl Set some variables for general configuration information to be saved -dnl and installed with the libraries. -dnl - -dnl HDF5 version from the first line of the README.txt file. -H5_VERSION="`cut -d' ' -f3 $srcdir/../README.txt | head -1`" -AC_SUBST(H5_VERSION) - -dnl Configuration date -AC_SUBST(CONFIG_DATE) CONFIG_DATE="`date`" - -dnl User doing the configuration -AC_SUBST(CONFIG_USER) CONFIG_USER="`whoami`@`hostname`" -if test -n "$ORGANIZATION"; then - CONFIG_USER="$CONFIG_USER at $ORGANIZATION" -fi - -dnl Configuration mode (production, development, profile, etc) saved above. -AC_SUBST(CONFIG_MODE) - -dnl Byte sex from the AC_C_BIGENDIAN macro. -AC_SUBST(BYTESEX) -if test "X$ac_cv_c_bigendian" = "Xyes"; then - BYTESEX="big-endian" -else - BYTESEX="little-endian" -fi - -dnl Parallel support? (set above except empty if none) -PARALLEL=${PARALLEL:-no} - -dnl Compiler with version information. This consists of the full path -dnl name of the compiler and the reported version number. -AC_SUBST(CC_VERSION) -if `echo $CC | grep / 2>&1 /dev/null`; then - CC_VERSION="$CC" -else - CC_VERSION="$CC"; - for x in `echo $PATH | sed -e 's/:/ /g'`; do - if test -x $x/$CC; then - CC_VERSION="$x/$CC" - break - fi - done -fi -if test -n "$cc_vendor" && test -n "$cc_version"; then - CC_VERSION="$CC_VERSION ($cc_vendor-$cc_version)" -fi - -AC_SUBST(FC_VERSION) -if `echo $F9X | grep / 2>&1 /dev/null`; then - FC_VERSION="$F9X" -else - FC_VERSION="$F9X"; - for x in `echo $PATH | sed -e 's/:/ /g'`; do - if test -x $x/$F9X; then - FC_VERSION="$x/$F9X" - break - fi - done -fi - -dnl ---------------------------------------------------------------------- -dnl Determine the runtime libraries we may need to include in the -dnl libtools command so that executables will find the correct dynamic -dnl libraries. -dnl -AC_SUBST(DYNAMIC_DIRS) DYNAMIC_DIRS="" -if test -n "$LDFLAGS"; then - for d in $LDFLAGS ; do - case "$d" in - -L*) - d=`echo $d | sed -e 's/-L//g'` - case "$d" in - .*) - dnl If the path isn't absolute, make it so by prepending the - dnl ROOT directory to it. - d=${ROOT}/$d - ;; - esac - DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS" - ;; - esac - done -fi - -dnl ---------------------------------------------------------------------- -dnl Build the Makefiles. Almost every Makefile.in will begin with the line -dnl `@COMMENCE@' and end with the line `@CONCLUDE@'. These lines insert -dnl various files from the config directory into the Makefile. -dnl -AC_SUBST_FILE(COMMENCE) COMMENCE=config/commence -AC_SUBST_FILE(CONCLUDE) CONCLUDE=config/conclude - -dnl The directory search list -if test -z "$SEARCH"; then - AC_SUBST(SEARCH) SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' - cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' - SEARCH="$SEARCH_RULE`eval $cmd`" -fi - -dnl We don't need to say when we're entering directories if we're using -dnl GNU make becuase make does it for us. -if test "X$GMAKE" = "Xyes"; then - AC_SUBST(SETX) SETX=":" -else - AC_SUBST(SETX) SETX="set -x" -fi - -dnl Some cleanup stuff -rm -f conftest conftest.o conftest.c core core.* *.core dummy.o - -dnl Build config.status, touch the stamp files, and build all the Makefiles. -dnl The order is such that the first `make' does not need to update any -dnl configuration information. See config/commence.in for the order in which -dnl things need to be done. - -dnl First the stamp1 file for H5config.h.in -mkdir ./config >/dev/null 2>&1 -touch ./config/stamp1 - -PARALLEL_MAKE= - -if test -n "$TESTPARALLEL"; then - PARALLEL_MAKE=$TESTPARALLEL/Makefile -fi - -dnl Then the config.status file (but not makefiles) -saved_no_create=$no_create -no_create=yes -AC_CONFIG_FILES([config/depend1 - config/depend2 - config/depend3 - config/depend4 - config/dependN - config/commence - config/conclude - Makefile - src/h5fc - src/H5fortran_types.f90 - src/libhdf5_fortran.settings - src/Makefile - test/Makefile - $PARALLEL_MAKE - examples/Makefile]) -AC_OUTPUT -no_create=$saved_no_create - -dnl Then the stamp2 file for H5config_fortran.h -touch ./config/stamp2 - -dnl Finally the makefiles -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - -chmod 755 src/h5fc diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in index 601d51a..c4c1882 100644 --- a/fortran/examples/Makefile.in +++ b/fortran/examples/Makefile.in @@ -12,11 +12,13 @@ ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_FORTRAN="yes" + hdf5_builddir=$(top_builddir)/src ## Replace building FC with the just installed h5fc diff --git a/fortran/src/Dependencies b/fortran/src/Dependencies index 5e807fa..2afb2ff 100644 --- a/fortran/src/Dependencies +++ b/fortran/src/Dependencies @@ -543,5 +543,4 @@ H5FDmpiof.lo: \ $(top_srcdir)/src/H5FDstream.h \ $(srcdir)/H5f90i.h \ $(srcdir)/H5f90proto.h \ - $(srcdir)/H5Git.h \ - H5pubconf_fortran.h + $(srcdir)/H5Git.h diff --git a/fortran/src/H5FDmpiof.c b/fortran/src/H5FDmpiof.c index f5e932f..69a22ec 100644 --- a/fortran/src/H5FDmpiof.c +++ b/fortran/src/H5FDmpiof.c @@ -16,7 +16,7 @@ #include "H5f90.h" #include -#include "H5pubconf_fortran.h" +#include "H5pubconf.h" /* Support for C to Fortran translation in MPI */ diff --git a/fortran/src/H5config_fortran.h.in b/fortran/src/H5config_fortran.h.in deleted file mode 100644 index c37ec5e..0000000 --- a/fortran/src/H5config_fortran.h.in +++ /dev/null @@ -1,106 +0,0 @@ -/* src/H5config_fortran.h.in. Generated from configure.in by autoheader. */ - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define if support for deflate filter is enabled */ -#undef HAVE_FILTER_DEFLATE - -/* Define if support for Fletcher32 checksum is enabled */ -#undef HAVE_FILTER_FLETCHER32 - -/* Define if support for shuffle filter is enabled */ -#undef HAVE_FILTER_SHUFFLE - -/* Define if support for szip filter is enabled */ -#undef HAVE_FILTER_SZIP - -/* Define if we have GPFS support */ -#undef HAVE_GPFS - -/* Define to 1 if you have the header file. */ -#undef HAVE_GPFS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the `m' library (-lm). */ -#undef HAVE_LIBM - -/* Define to 1 if you have the `nsl' library (-lnsl). */ -#undef HAVE_LIBNSL - -/* Define to 1 if you have the `socket' library (-lsocket). */ -#undef HAVE_LIBSOCKET - -/* Define to 1 if you have the `sz' library (-lsz). */ -#undef HAVE_LIBSZ - -/* Define to 1 if you have the `z' library (-lz). */ -#undef HAVE_LIBZ - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists */ -#undef HAVE_MPI_MULTI_LANG_Comm - -/* Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists */ -#undef HAVE_MPI_MULTI_LANG_Info - -/* Define to 1 if you have the header file. */ -#undef HAVE_NETINET_TCP_H - -/* Define if `socklen_t' is defined */ -#undef HAVE_SOCKLEN_T - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define if the stream virtual file driver should be compiled */ -#undef HAVE_STREAM - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_FILIO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SZLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_ZLIB_H - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS diff --git a/fortran/src/H5f90i.h b/fortran/src/H5f90i.h index 1b5b7ce..663c9b5 100644 --- a/fortran/src/H5f90i.h +++ b/fortran/src/H5f90i.h @@ -94,7 +94,8 @@ typedef float real_f; #endif /*IBM6000*/ /* LINUX definitions */ -#if defined(i386) && defined(linux) +#if (defined(i386) || defined(__i386__)) && (defined(linux) || defined(__linux__)) + #define DF_MT DFMT_LINIX typedef char *_fcd; typedef long long hsize_t_f; @@ -115,6 +116,7 @@ typedef float real_f; /* IA64 LINUX definitions */ #if defined __ia64 + typedef char *_fcd; typedef long hsize_t_f; typedef long hssize_t_f; @@ -170,6 +172,7 @@ typedef float real_f; #endif /* IRIX */ #if (defined(SUN) || defined(sun) || defined(__sun__) || defined(__SUNPRO_C)) & !defined(__i386) + #ifdef __STDC__ #define ANSISUN #else /* __STDC__ */ @@ -232,7 +235,7 @@ typedef float real_f; #endif /* DEC_ALPHA */ -#if defined __alpha__ && defined __linux__ +#if defined __alpha__ && defined __linux__ #ifndef DEC_ALPHA_LINUX #define DEC_ALPHA_LINUX @@ -291,6 +294,7 @@ typedef float real_f; #if defined _WINDOWS || defined WIN32 + #define GOT_MACHINE 1 #pragma comment( lib, "oldnames" ) diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in index 80c9945..6b80cc5 100644 --- a/fortran/src/Makefile.in +++ b/fortran/src/Makefile.in @@ -13,18 +13,20 @@ ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_FORTRAN="yes" + hdf5_srcdir=$(top_srcdir)/src hdf5_builddir=$(top_builddir)/src TRACE=perl $(top_srcdir)/bin/trace ## Add `-I.' to the C preprocessor flags. -CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) @CPPFLAGS@ +CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) -I$(srcdir) @CPPFLAGS@ ## This is our main target LIB=libhdf5_fortran.la @@ -34,7 +36,7 @@ LIB=libhdf5_fortran.la DISTCLEAN=H5fortran_types.f90 h5fc libhdf5_fortran.settings ## Public header files (to be installed)... -PUB_HDR=H5pubconf_fortran.h +PUB_HDR= PUB_PROGS=h5fc ## Source and object files for the library diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in index 920f06f..811aaaa 100644 --- a/fortran/test/Makefile.in +++ b/fortran/test/Makefile.in @@ -13,18 +13,20 @@ ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_FORTRAN="yes" + hdf5_srcdir=$(top_srcdir)/src hdf5_builddir=$(top_builddir)/src CPPFLAGS=-I. -I$(hdf5_builddir) -I$(hdf5_srcdir) @CPPFLAGS@ ## Add include directory to the C preprocessor flags and the h5test and hdf5 ## libraries to the library list. -LT_LINK_LIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir) +LT_LINK_FLIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir) FLIB=../src/libhdf5_fortran.la HDF5LIB=$(hdf5_builddir)/libhdf5.la TCLIB=../../test/.libs/libh5test.a @@ -51,12 +53,12 @@ MOSTLYCLEAN=*.h5 *.tmp $(TEST_PROGS): $(LIB) $(FLIB) fortranlib_test: $(FORTLIBTEST_OBJ) - @$(LT_LINK_FEXE) $(FFLAGS) -o $@ $(FORTLIBTEST_OBJ) $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) + @$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ $(FORTLIBTEST_OBJ) $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) fflush1: fflush1.lo - @$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush1.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) + @$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ fflush1.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) fflush2: fflush2.lo - @$(LT_LINK_FEXE) $(FFLAGS) -o $@ fflush2.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) + @$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ fflush2.lo $(LIB) $(TCLIB) $(FLIB) $(LIBS) $(HDF5LIB) @CONCLUDE@ diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in index 2cf5cef..4397c0d 100644 --- a/fortran/testpar/Makefile.in +++ b/fortran/testpar/Makefile.in @@ -1,6 +1,5 @@ ## HDF5 Fortran Parallel Library Test Makefile(.in) ## - ## ## Copyright by the Board of Trustees of the University of Illinois. ## All rights reserved. @@ -14,11 +13,13 @@ ## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have ## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. ## -top_srcdir=@top_srcdir@/.. +top_srcdir=@top_srcdir@ top_builddir=../.. srcdir=@srcdir@ @COMMENCE@ +HDF_FORTRAN="yes" + hdf5_builddir=$(top_builddir)/src ## Add the include directory to the C preprocessor flags the the hdf5 library @@ -26,8 +27,8 @@ hdf5_builddir=$(top_builddir)/src LT_LINK_LIB=$(LT) --mode=link $(F9X) -static -rpath $(libdir) LIBFORTRAN=../src/libhdf5_fortran.la LIBHDF5=$(hdf5_builddir)/libhdf5.la -FTLIB = ../test/libh5test_fortran.la -CTLIB = ../../test/.libs/libh5test.a +FTLIB=../test/libh5test_fortran.la +CTLIB=../../test/libh5test.la ## These tests are parallel RUNTEST=$(RUNPARALLEL) @@ -57,6 +58,6 @@ thyperslab_wr.lo: $(srcdir)/thyperslab_wr.f90 thdf5.lo ptesthdf5_fortran.lo: $(srcdir)/ptesthdf5_fortran.f90 thdf5.lo ptesthdf5_fortran: thdf5.lo thyperslab_wr.lo ptesthdf5_fortran.lo - @$(LT_LINK_FEXE) $(FFLAGS) -o $@ ptesthdf5_fortran.lo thdf5.lo thyperslab_wr.lo $(FTLIB) $(CTLIB) $(LIBFORTRAN) $(LIBHDF5) $(LIBS) + @$(LT_LINK_FEXE) -static $(FFLAGS) -o $@ ptesthdf5_fortran.lo thdf5.lo thyperslab_wr.lo $(FTLIB) $(CTLIB) $(LIBFORTRAN) $(LIBHDF5) $(LIBS) @CONCLUDE@ diff --git a/src/H5config.h.in b/src/H5config.h.in index b8d57b7..45d725d 100644 --- a/src/H5config.h.in +++ b/src/H5config.h.in @@ -185,6 +185,12 @@ /* Define to 1 if you have the header file. */ #undef HAVE_MPE_H +/* Define if `MPI_Comm_c2f' and `MPI_Comm_f2c' exists */ +#undef HAVE_MPI_MULTI_LANG_Comm + +/* Define if `MPI_Info_c2f' and `MPI_Info_f2c' exists */ +#undef HAVE_MPI_MULTI_LANG_Info + /* Define to 1 if you have the header file. */ #undef HAVE_NETINET_TCP_H -- cgit v0.12