From 945f3c777fe00be0b3acd58aa3ef80f93d5436ae Mon Sep 17 00:00:00 2001 From: HDF Admin Date: Sun, 10 Jul 2005 17:52:12 -0500 Subject: [svn-r11061] Snapshot version 1.6 release 4 (post4) --- README.txt | 2 +- c++/configure | 18 +++++++++--------- c++/configure.in | 2 +- configure | 18 +++++++++--------- configure.in | 2 +- doc/html/ADGuide/RELEASE.txt | 23 +++++++++++++++-------- fortran/configure | 18 +++++++++--------- fortran/configure.in | 2 +- release_docs/RELEASE.txt | 2 +- src/H5public.h | 4 ++-- 10 files changed, 49 insertions(+), 42 deletions(-) diff --git a/README.txt b/README.txt index 8f635d8..1d3ef65 100644 --- a/README.txt +++ b/README.txt @@ -1,4 +1,4 @@ -HDF5 version 1.6.4-post4 currently under development +HDF5 version 1.6.4-post5 currently under development Please refer to the release_docs/INSTALL file for installation instructions. ------------------------------------------------------------------------------ diff --git a/c++/configure b/c++/configure index 13f8524..b274f65 100755 --- a/c++/configure +++ b/c++/configure @@ -1,7 +1,7 @@ #! /bin/sh # From c++/configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for HDF5 C++ 1.6.4-post4. +# Generated by GNU Autoconf 2.59 for HDF5 C++ 1.6.4-post5. # # Report bugs to . # @@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5 C++' PACKAGE_TARNAME='hdf5-c--' -PACKAGE_VERSION='1.6.4-post4' -PACKAGE_STRING='HDF5 C++ 1.6.4-post4' +PACKAGE_VERSION='1.6.4-post5' +PACKAGE_STRING='HDF5 C++ 1.6.4-post5' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/H5Library.cpp" @@ -952,7 +952,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 C++ 1.6.4-post4 to adapt to many kinds of systems. +\`configure' configures HDF5 C++ 1.6.4-post5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1013,7 +1013,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 C++ 1.6.4-post4:";; + short | recursive ) echo "Configuration of HDF5 C++ 1.6.4-post5:";; esac cat <<\_ACEOF @@ -1152,7 +1152,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 C++ configure 1.6.4-post4 +HDF5 C++ configure 1.6.4-post5 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. @@ -1166,7 +1166,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 C++ $as_me 1.6.4-post4, which was +It was created by HDF5 C++ $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -10986,7 +10986,7 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 C++ $as_me 1.6.4-post4, which was +This file was extended by HDF5 C++ $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -11041,7 +11041,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 C++ config.status 1.6.4-post4 +HDF5 C++ config.status 1.6.4-post5 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" diff --git a/c++/configure.in b/c++/configure.in index 4b28a2e..085c92e 100644 --- a/c++/configure.in +++ b/c++/configure.in @@ -27,7 +27,7 @@ dnl dnl NOTE: Don't forget to change the version number here when we do a dnl release!!! dnl -AC_INIT([HDF5 C++], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu]) +AC_INIT([HDF5 C++], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu]) AC_CONFIG_SRCDIR([src/H5Library.cpp]) AC_CONFIG_AUX_DIR([../bin]) diff --git a/configure b/configure index e44ecc1..b076685 100755 --- a/configure +++ b/configure @@ -1,7 +1,7 @@ #! /bin/sh # From configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for HDF5 1.6.4-post4. +# Generated by GNU Autoconf 2.59 for HDF5 1.6.4-post5. # # Report bugs to . # @@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5' PACKAGE_TARNAME='hdf5' -PACKAGE_VERSION='1.6.4-post4' -PACKAGE_STRING='HDF5 1.6.4-post4' +PACKAGE_VERSION='1.6.4-post5' +PACKAGE_STRING='HDF5 1.6.4-post5' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/H5.c" @@ -942,7 +942,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 1.6.4-post4 to adapt to many kinds of systems. +\`configure' configures HDF5 1.6.4-post5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1003,7 +1003,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 1.6.4-post4:";; + short | recursive ) echo "Configuration of HDF5 1.6.4-post5:";; esac cat <<\_ACEOF @@ -1181,7 +1181,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 configure 1.6.4-post4 +HDF5 configure 1.6.4-post5 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. @@ -1195,7 +1195,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 $as_me 1.6.4-post4, which was +It was created by HDF5 $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -37034,7 +37034,7 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 $as_me 1.6.4-post4, which was +This file was extended by HDF5 $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -37097,7 +37097,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 config.status 1.6.4-post4 +HDF5 config.status 1.6.4-post5 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" diff --git a/configure.in b/configure.in index ae06d81..fe73e65 100644 --- a/configure.in +++ b/configure.in @@ -24,7 +24,7 @@ dnl dnl NOTE: Don't forget to change the version number here when we do a dnl release!!! dnl -AC_INIT([HDF5], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu]) +AC_INIT([HDF5], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu]) AC_CONFIG_SRCDIR([src/H5.c]) AC_CONFIG_HEADER([src/H5config.h]) diff --git a/doc/html/ADGuide/RELEASE.txt b/doc/html/ADGuide/RELEASE.txt index c5ba615..7061949 100644 --- a/doc/html/ADGuide/RELEASE.txt +++ b/doc/html/ADGuide/RELEASE.txt @@ -1,4 +1,4 @@ -HDF5 version 1.6.4-post3 released on Sun Jul 3 17:52:03 CDT 2005 +HDF5 version 1.6.4-post4 released on Sun Jul 10 17:50:56 CDT 2005 ================================================================================ INTRODUCTION @@ -72,6 +72,11 @@ Bug Fixes since HDF5-1.6.4 release Library ------- + - Dataset sieve buffer cache was inadvertantly disabled - re-enable + it. QAK - 2005/07/08 + - Don't unmount child files until the parent file actually closes. + (Previously, if an object is holding open a file, the child files + would get unmounted too early). QAK - 2005/07/05 - Fixed bug where unmounted files could cause the library to go into an infinite loop when shutting down. QAK - 2005/06/30 - Fixed bug with hyperslab selections that use selection offsets and @@ -304,13 +309,15 @@ Footnotes: (1) Using mpich 1.2.6 Known Problems ============== -* The dataset created with the v1.6.2 library can't be read with the v1.6.3 - library or after when Fletcher32 EDC(filter) is enabled. There was a bug - in the calculating code of the Fletcher32 checksum in the library before - v1.6.3. The checksum value wasn't consistent between big-endian and - little-endian systems. This bug was fixed in Release 1.6.3. However, after - fixing the bug, the checksum value is no longer the same as before on - little-endian system. SLU - 2005/6/30 +* The dataset created or rewritten with the v1.6.3 library or after can't + be read with the v1.6.2 library or before when Fletcher32 EDC(filter) is + enabled. There was a bug in the calculating code of the Fletcher32 + checksum in the library before v1.6.3. The checksum value wasn't consistent + between big-endian and little-endian systems. This bug was fixed in + Release 1.6.3. However, after fixing the bug, the checksum value is no + longer the same as before on little-endian system. The library release + after 1.6.4 can still read the dataset created or rewritten with the library + of v1.6.2 or before. SLU - 2005/7/8 * For the version 6(6.02 and 6.04) of Portland Group compiler on AMD Opteron processor, there's a bug in the compiler for optimization(-O2). The library failed in several tests but all related to multi driver. The problem has diff --git a/fortran/configure b/fortran/configure index 32bf445..9c34e44 100755 --- a/fortran/configure +++ b/fortran/configure @@ -1,7 +1,7 @@ #! /bin/sh # From fortran/configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for HDF5 Fortran 1.6.4-post4. +# Generated by GNU Autoconf 2.59 for HDF5 Fortran 1.6.4-post5. # # Report bugs to . # @@ -429,8 +429,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='HDF5 Fortran' PACKAGE_TARNAME='hdf5-fortran' -PACKAGE_VERSION='1.6.4-post4' -PACKAGE_STRING='HDF5 Fortran 1.6.4-post4' +PACKAGE_VERSION='1.6.4-post5' +PACKAGE_STRING='HDF5 Fortran 1.6.4-post5' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/HDF5.f90" @@ -940,7 +940,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures HDF5 Fortran 1.6.4-post4 to adapt to many kinds of systems. +\`configure' configures HDF5 Fortran 1.6.4-post5 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1001,7 +1001,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of HDF5 Fortran 1.6.4-post4:";; + short | recursive ) echo "Configuration of HDF5 Fortran 1.6.4-post5:";; esac cat <<\_ACEOF @@ -1144,7 +1144,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -HDF5 Fortran configure 1.6.4-post4 +HDF5 Fortran configure 1.6.4-post5 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. @@ -1158,7 +1158,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by HDF5 Fortran $as_me 1.6.4-post4, which was +It was created by HDF5 Fortran $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -12184,7 +12184,7 @@ _ASBOX } >&5 cat >&5 <<_CSEOF -This file was extended by HDF5 Fortran $as_me 1.6.4-post4, which was +This file was extended by HDF5 Fortran $as_me 1.6.4-post5, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -12247,7 +12247,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -HDF5 Fortran config.status 1.6.4-post4 +HDF5 Fortran config.status 1.6.4-post5 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" diff --git a/fortran/configure.in b/fortran/configure.in index ebeb51a..2400e45 100644 --- a/fortran/configure.in +++ b/fortran/configure.in @@ -24,7 +24,7 @@ dnl dnl NOTE: Don't forget to change the version number here when we do a dnl release!!! dnl -AC_INIT([HDF5 Fortran], [1.6.4-post4], [hdfhelp@ncsa.uiuc.edu]) +AC_INIT([HDF5 Fortran], [1.6.4-post5], [hdfhelp@ncsa.uiuc.edu]) AC_CONFIG_SRCDIR([src/HDF5.f90]) AC_CONFIG_HEADER([src/H5config_fortran.h]) diff --git a/release_docs/RELEASE.txt b/release_docs/RELEASE.txt index 6de2514..5706e91 100644 --- a/release_docs/RELEASE.txt +++ b/release_docs/RELEASE.txt @@ -1,4 +1,4 @@ -HDF5 version 1.6.4-post4 currently under development +HDF5 version 1.6.4-post5 currently under development ================================================================================ INTRODUCTION diff --git a/src/H5public.h b/src/H5public.h index 45f0cfe..81c98fe 100644 --- a/src/H5public.h +++ b/src/H5public.h @@ -75,9 +75,9 @@ extern "C" { #define H5_VERS_MAJOR 1 /* For major interface/format changes */ #define H5_VERS_MINOR 6 /* For minor interface/format changes */ #define H5_VERS_RELEASE 4 /* For tweaks, bug-fixes, or development */ -#define H5_VERS_SUBRELEASE "post4" /* For pre-releases like snap0 */ +#define H5_VERS_SUBRELEASE "post5" /* For pre-releases like snap0 */ /* Empty string for real releases. */ -#define H5_VERS_INFO "HDF5 library version: 1.6.4-post4" /* Full version string */ +#define H5_VERS_INFO "HDF5 library version: 1.6.4-post5" /* Full version string */ #define H5check() H5check_version(H5_VERS_MAJOR,H5_VERS_MINOR, \ H5_VERS_RELEASE) -- cgit v0.12