From 8c870f14c100e57b39ea4995adc7a1d7cce63724 Mon Sep 17 00:00:00 2001 From: Allen Byrne Date: Mon, 17 Sep 2012 11:00:07 -0500 Subject: [svn-r22770] Update windows release docs to match 1.8 --- MANIFEST | 11 +- release_docs/INSTALL_MinGW.txt | 269 +++ release_docs/INSTALL_Windows.txt | 1754 +------------------- release_docs/INSTALL_Windows_From_Command_Line.txt | 4 +- release_docs/INSTALL_Windows_Short_VS2008.TXT | 11 +- release_docs/INSTALL_parallel | 2 +- release_docs/USING_CMake.txt | 202 +++ release_docs/USING_Windows.txt | 4 +- release_docs/Using_CMake.txt | 202 --- 9 files changed, 498 insertions(+), 1961 deletions(-) create mode 100644 release_docs/INSTALL_MinGW.txt create mode 100644 release_docs/USING_CMake.txt delete mode 100644 release_docs/Using_CMake.txt diff --git a/MANIFEST b/MANIFEST index fa9ff05..feccd23 100644 --- a/MANIFEST +++ b/MANIFEST @@ -514,22 +514,21 @@ ./perform/sio_timer.h ./perform/zip_perf.c +./release_docs/CMake.txt ./release_docs/COPYING ./release_docs/HISTORY-1_0-1_8_0_rc3.txt ./release_docs/HISTORY-1_9.txt ./release_docs/INSTALL ./release_docs/INSTALL_Cygwin.txt +./release_docs/INSTALL_MinGW.txt +./release_docs/INSTALL_parallel ./release_docs/INSTALL_VMS.txt ./release_docs/INSTALL_Windows.txt -./release_docs/USING_Windows.txt ./release_docs/INSTALL_Windows_From_Command_Line.txt -./release_docs/INSTALL_Windows_Short_NET.TXT -./release_docs/INSTALL_Windows_Short_VS2005.TXT ./release_docs/INSTALL_Windows_Short_VS2008.TXT -./release_docs/CMake.txt -./release_docs/INSTALL_parallel ./release_docs/RELEASE.txt -./release_docs/Using_CMake.txt +./release_docs/USING_CMake.txt +./release_docs/USING_Windows.txt ./src/.indent.pro _DO_NOT_DISTRIBUTE_ ./src/hdf5.lnt _DO_NOT_DISTRIBUTE_ diff --git a/release_docs/INSTALL_MinGW.txt b/release_docs/INSTALL_MinGW.txt new file mode 100644 index 0000000..245e3ff --- /dev/null +++ b/release_docs/INSTALL_MinGW.txt @@ -0,0 +1,269 @@ +************************************************************************ + HDF5 Build and Install Instructions for MinGW +************************************************************************ + +NOTE: +We are no longer actively supporting MinGW as of 1.8.5. +------ 1.8.9 notes ------ +Autotools configure failed to correctly generate the *config.h files. +CMake 2.8.6 can configure and build the library, however fortran programs did + not execute correctly. Some tests may fail. Used the "MSYS Makefiles" + generator for the "-G" parameter. Follow the CMake.txt document. + +Below are the old instructions from the 1.8.4 release. + +************************************************************************ +************************************************************************ +************************************************************************ + +Preconditions: +-------------- + +1. Installed MinGW (5.1.6 or higher) and MSYS (1.0.11 or higher) + + To install the MinGW net release, go to http://www.mingw.org and + follow the instructions for a manual installation. + +2. Compilers Installed + + 2.1 C/C++ Compilers HDF5-1.8.4 Supported + + gcc-4.4.0 is included in MinGW, which includes: + gcc : GNU C compiler + gcc-g++: GNU C++ compiler + gfortran: GNU Fortran compiler + + 2.2 Using Compilers Not Supported + + The compilers in 2.1 are supported and tested by The HDF + Group. Any other compilers may still work but they are not + guaranteed by HDF group. + + If users want to use other compilers except those in 2.1, + try to set the following variables to override the default + choices. + + CC : C compiler command + CXX : C++ compiler command + FC : Fortran compiler command + +3. HDF5 Dependencies + + 3.1 Zlib + + zlib-1.2.2 or later is supported and tested on MinGW. + + 3.2 Szip + The HDF5 library has a predefined compression filter that uses + the extended-Rice lossless compression algorithm for chunked + datatsets. For more information about Szip compression and + license terms see + http://hdfgroup.org/HDF5/doc_resource/SZIP/index.html. + + Szip is currently not supported on MinGW, although we plan to add + support in the future. + + +Build HDF5 on MinGW +---------------------- + +1. Get HDF5 source code package + Users can download HDF5 source code package from HDF website + (http://hdfgroup.org). + +2. Unpacking the distribution + + The HDF5 source code is distributed in a variety of formats which + can be unpacked with the following commands, each of which creates + an `hdf5-1.8.4' directory. + + 2.1 Non-compressed tar archive (*.tar) + + $ tar xf hdf5-1.8.4.tar + + 2.2 Gzip'd tar archive (*.tar.gz) + + $ gunzip < hdf5-1.8.4.tar.gz | tar xf - + + 2.3 Bzip'd tar archive (*.tar.bz2) + + $ bunzip2 < hdf5-1.8.4.tar.bz2 | tar xf - + +3. Setup Environment + + Building HDF5 1.8.4 requires an explicit link to libws2_32.a + to handle Windows Sockets. To do this, issue the command: + + $ export LIBS=-lws2_32 + + Also, the default search path can cause trouble using ./configure in HDF5 + 1.8.4. Check that non-MinGW or non-msys directories are not added to the + PATH. You can do this by: + + $ echo $PATH + + If there are spurious entries, specifically those related to other Windows + compilers or tools, remove them by setting a new PATH without them. For + example, + + $ export PATH=.:/usr/local/bin:/mingw/bin:/bin + + +4. Remove Unsupported Source + + There are some projects which are built by default to test performance on + POSIX systems. They are irrelevent on MinGW, and can cause compiler errors. + + To remove these projects from the build script, open ./perform/Makefile.in + Find all instances of "h5perf_serial", and remove them (along with their + respective extension or targets, if they exist). Then save the file. + + +5. Remove Tests + + When building with MinGW, many tests must be removed from the + test suite run with "make check". This is because of the way + MinGW and Windows handles certain parsing. For example, MinGW + treats any command parameter starting with '/' as a path, and + replaces it with it's root directory on Windows, such as + 'C:\msys\1.0\'. + + To remove the tests, open the given 'Makefile.in' and edit the + line begining with "TEST_SCRIPT = " to remove the test script. + For example, to remove the "testerror.sh" from ./test/Makefile.in: + + 1) Open ./test/Makefile.in + + 2) Find the line "TEST_SCRIPT = $(top_srcdir)/test/testerror.sh" + + 3) Change it to simply read "TEST_SCRIPT =", and save. + + Do this for the following Makefiles and tests: + + - ./test/Makefile.in: "testerror.sh testlibinfo.sh testcheckinfo.sh" + + - ./tools/h5diff/Makefile.in: "testh5diff.sh" + + - ./tools/h5ls/Makefile.in: "testh5ls.sh" + + - ./tools/misc/Makefile.in: "testh5mkgrp.sh" + + - ./tools/h5copy/Makefile.in: "testh5copy.sh" + + - ./tools/h5stat/Makefile.in: "testh5stat.sh" + + - ./tools/h5dump/Makefile.in: "testh5dump.sh" and "testh5dumpxml.sh" + + +6. Configuring + + Notes: + 1) Note: MinGW is c++ package is missing the libstdc++.dll.a file + and c++ linking fails. Do not enable c++ option in configure. + + 2) See detailed information in hdf5/release_docs/INSTALL, + part 5. Full installation instructions for source + distributions + + In short, + + To configure HDF5 with C Library, use + + $ ./configure + + If you would like to build the C++ library, add the parameter: + + --enable-cxx (12-11-2009 MinGW C++ package is missing a file) + + If you would like to build without the Zlib library, add the parameter: + + --without-zlib + + If you would like to specify the the Zlib library, there are two ways: + + Using + + --with-zlib=INCDIR,LIBDIR + + For example, if the zlib library is installed in + /usr, which is the parent directory of directories + "include" and "lib", + + --with-zlib=/usr/include,/usr/lib + + Through the CPPFLAGS and LDFLAGS Variables + + For example, if zlib was installed in the directory + /c/usr then using the following command to configure + HDF5 with zib + + $ export CPPFLAGS=-I/usr/include + $ export LDFLAGS=-L/usr/lib + + If you would like to specify the install directory, add the parameter: + + --prefix="path for installation" + + By default, HDF5 library, header files, examples, and + support programs will be installed in /usr/local/lib, + /usr/local/include, /usr/local/doc/hdf5/examples, and + /usr/local/bin. To use a path other than /usr/local specify + the path with the `--prefix=PATH' switch as in the above + command. + + Combination of Switches + + All of the above switches can be combined together. For + example, if users want to configure HDF5 C/Fortran + library, with zlib library at /c/usr/, and + install HDF5 into directory /c/hdf5 using + gcc/gfortran as C/Fortran compiler: + + $ ./configure + --with-zlib=/usr/include,/usr/lib + --prefix=/c/hdf5 + --enable-fortran + <"If no more switches, then hit Enter"> + + Notes: The command format above is for readilibity. In practice, + please type in the command above with at least one + space between each line, No "Enter" until users finish + the switches and want to run the configure. + + + or do it through CPPFLAGS and LDFLAGS variables: + + $ CPPFLAGS=-I/usr/include \ + $ LDFLAGS=-L/usr/lib \ + + $ ./configure + --prefix=/c/hdf5 + --enable-fortran + <"If no more switches, then hit Enter"> + +7. Make and Make Check + + After configuration is done successfully, run the following series of + commands to build, test and install HDF5 + + $ make > "output file name" + $ make check > "output file name" + + Before run "make install", check output file for "make check", there + should be no failures at all. + +8. Make Install + + $ make install > "output file name" + + +9. Check installed HDF5 library + + After step 8, go to your installation directory, there should be + three subdirectories: "bin" "include" and "lib". + + $ make installcheck > "output file name" + +----------------------------------------------------------------------- + +Need Further assistance, email help@hdfgroup.org diff --git a/release_docs/INSTALL_Windows.txt b/release_docs/INSTALL_Windows.txt index e7184d4..967675f 100644 --- a/release_docs/INSTALL_Windows.txt +++ b/release_docs/INSTALL_Windows.txt @@ -1,1754 +1,16 @@ *********************************************************************** -* HDF5 Build and Install Instructions for Windows XP/VISTA * +* HDF5 Build and Install Instructions for Windows * * (Full Version) * *********************************************************************** -The following instructions assume that the HDF5 source code package from -HDF website (http://hdfgroup.org) is used. +We now recommend that users build, test and install HDF5 using CMake. -Warnings: -Please read CAREFULLY about the following preconditions and notes first. +Instructions for building and testing HDF5 using CMake can be found in +the CMake.txt file found in this folder. -Contents: +The old solutions and projects found in the windows\ folder will be +maintained for legacy users until HDF5 1.10. - Section : Preconditions and Notes - Section I : What do we build and install - Section II : How to build and test HDF5 libraries and tools - Section III : How to build examples (optional) - Section IV : How to build an application using the HDF5 library or DLL - Section V : How to disable Gzip(Zlib)/Szip compression - Section VI : How to build HDF5 with Fortran Support - Section VII : How to build Multi-threaded version of HDF5 library - Section VIII : How to build HDF5 with Thread-Safe Feature - Section IX : How to build HDF5 for 64-bit Windows - Section X : How to build HDF5 on Windows Vista - Section XI : How to build HDF5 using Visual Studio 2008 - Section XII : Backwards Compatibility with HDF5 1.6 - Section XIII : Misc. - - -======================================================================== - Preconditions and Notes -======================================================================== - -Preconditions: - - 1. Installed Microsoft Visual Studio. This document is written for Visual - Studio 2008. We no longer support building HDF5 using Microsoft Visual - Studio .NET 2003 or 2005. Express Editions may work with the project files - but not from the command line. We do not support the Express Editions. - - 2. (Optional) Installed Intel Compiler 10.1 or 11.1 if you want to build HDF5 - Fortran libraries. We no longer support Intel Fortran Compiler 9.1. - - 3. Install Winzip or 7-zip for extracting source tarball. - - Note: 1. 7zip is an open-source alternative to WinZip. Some of the - advanced functionality is disabled in WinZip unless you buy the - software. With 7zip, most of this functionality is included for - free. - - 2. By default, WinZip will convert the Unix end of line format when - extracting .tar file. This conversion will cause "false" failure - in some HDF5 tools testings. - - Please uncheck the "TAR file smart CR/LF conversion" option in your - WinZip to prevent the conversion when extracting .tar file. To - uncheck the "TAR file smart CR/LF conversion" option: - - Invoke WinZip, go to "Options", select "Configuration..." - - Click the "Miscellaneous" tab and uncheck "TAR file smart CR/LF - conversion" option, then click OK. - - 4. CMake is available for this release. CMake 2.8.2 can be downloaded from - the KitWare website at http://www.kitware.com. - - Note: We have attempted to mirror our Autoconf configuration files for - maintainence reasons. We are still working to synchronize the - configuration files. - Also, if you are using a VS Express version or do not want to enable - the packaging components, set HDF5_NO_PACKAGES to ON (on the command - line add -DHDF5_NO_PACKAGES:BOOL=ON) - - 5. Set up a directory structure to unpack the library. For example: - - c:\ (any drive) - MyHDFstuff\ (any folder name) - - 6. Download the hdf5-1.9.x source code package and use 7zip or WinZip to - extract the HDF5 package into c:\MyHDFstuff. This creates a directory - called 'hdf5-1.9.x' under MyHDFstuff which contains several files and - directories. Rename "hdf5-1.9.x" to "hdf5". - - 7. HDF5 provide options to do in-memory compression within HDF5 library. - Currently, two external compression libraries Zlib and Szip can be used - with HDF5. - - 7.1 HDF5 uses Zlib version 1.2.5 for compression and Zlib is NOT - distributed with HDF5 library in 1.9.x release. To use Zlib library, - you have to install your own Zlib DLL library or go to - http://www.zlib.net/ to download the Zlib library. - - 7.2 HDF5 uses Szip version 2.1 for compression and Szip compression - software is provided with HDF5 products in 1.9.x release. To use - Szip 2.1 library, you can download Szip source codes and binaries from - ftp://ftp.hdfgroup.org/lib-external/szip/2.1/bin/windows - - Please note that Szip is not a totally open-source free software. - For licensing issue of Szip, please check "Licensing terms" at - http://hdfgroup.org/doc_resource/SZIP/index.html. - - Szip compression feature inside HDF5 is optional. - - 8. Define the following environment variables: - - HDF5_EXT_ZLIB - HDF5_EXT_SZIP - - In this section, Zlib and Szip compression packages are assumed to be - used. Please read Section V as well as this section if you do not want - to use compression feature inside HDF5. - - To define these environment variables: - - Click "Start", click "Control Panel", and then double-click "System". - On the "Advanced" tab, click "Environment Variables". - - If you are logged on as administrator to the local computer AND want to - let all other users use these two environment variables, click "New" - under "System Variables" box; otherwise, click "New" under "User - Variables" box. - - In the New Variable window, set "Variable name" as HDF5_EXT_ZLIB and - "Variable value" as zlib1.lib, then click OK. - - Similarly, you can set: - - HDF5_EXT_SZIP environment variable as szip.lib - - Notes: - - a. You will have to close and reopen running programs for the new - environment variable settings to take effect. - - b. c:\zlib\zlib1.dll and c:\szip\szip.dll should be copied - into a location that the application can find. - - 9. Set up path for external libraries and headers - - Skip this part if you don't want to use ANY compression features provided - by HDF5. Please do read Section V. - - You have to read this part even if you want to only use Zlib or Szip. - You also need to read Section V. - - Invoke Microsoft Visual Studio and go to "Tools" and select "Options", - find "Projects", and then "VC++ Directories". - - 9.1 If you are building on 64-bit Windows, find the "Platform" dropdown - and select "x64". - - 9.2 Find the box "Show directories for", choose "Include files", if you - can not find your Zlib and Szip header path (for example, - c:\zlib\include, c:\szip\include) from the directory list, add the - header path (c:\zlib\include, c:\szip\include) to the included - directories. - - 9.3 Find the box "Show directories for", choose "Library files". If you - cannot find your Zlib and Szip library path (for example, - c:\zlib\dll, c:\szip\dll) from the directory list, add the library - path (c:\zlib\dll, c:\szip\dll) to the library directories. - - 9.4 If building Fortran libraries, you will also need to setup the path - for the Intel Fortran compiler. Please see Section VI. - -Notes: - - 1. Users should go to hdf5/windows directory, run copy_hdf.bat first and then - open all.sln under hdf5/windows/proj/all to start building process. - - 2. Visual Studio 6.0 is no longer supported in HDF5 1.8 or later releases. - Visual Studio .NET is no longer support in HDF5 1.8.4 or later releases. - Visual Studio 2005 is no longer support in HDF5 1.8.5 or later releases. - Intel Fortran 9.1 is no longer support in HDF5 1.8.5 or later releases. - - 3. For users who want to quickly build HDF5 library or do not want to know - HDF5 building and installation details, please read the - INSTALL_Windows_Short_2008.txt relating to your compiler. - - 4. For users who would like to build and test HDF5 package from the command - line, please read INSTALL_Windows_From_Command_Line.txt. - - 5. For users who would like to build and test HDF5 package using CMake, - please read CMake.txt. - - 6. HDF4-related tools are not built and released with HDF5 library packages - any more. To obtain HDF4 related tools, please check - http://hdfgroup.org/h4toh5/ and ftp://ftp.hdfgroup.org/HDF5/h4toh5 - - 7. For Fortran users, Intel Fortran Compiler 10.1 is currently supported - -- please see Section VI. Intel Compiler verion 7.x, 8.x and 9.x are - no longer supported. Intel Compiler 11.1 can be used but the project files - must be upgraded within the Visual Studio IDE. - - 8. Visual Studio now only builds muti-threaded versions of HDF5 library, - please read Section VII. - - -======================================================================== - Section I: What do we build and install? -======================================================================== - - 1. Build and Install - - HDF5 static library: - debug and release version - - HDF5 Dynamic Link Library(DLL): - debug and release version as well as export libraries for DLL - - HDF5 High-Level Library (Optional): - HDF5 C++ Library - HDF5 HL-Fortran Library - - HDF5 tools: - HDF5 tools - - 2. Build Only (Not included in the binary distribution) - - HDF5 tool library: - debug and release version - - HDF5 tool export library for DLL: - debug and release version - - HDF5 library testing programs: - HDF5 library comprehensive tests - - HDF5 related tools testing programs: - HDF5 tools comprehensive tests - - 3. Examples (Not included in the binary distribution) - - HDF5 examples: - Simple HDF5 C/C++/Fortran and High level C/Fortran examples - -======================================================================== - Section II: How to build and test HDF5 libraries and tools -======================================================================== - -Note: - To build and test HDF5 with Fortran support, please read over Section VI. - - -STEP 1: Building HDF5 Libraries and Tools - - - 1. Run batch file copy_hdf.bat - - Go to c:\MyHDFstuff\hdf5\windows and run copy_hdf.bat. This process will - copy all the necessary batch files, Windows-specific source code and - text files saved under c:\MyHDFstuff\hdf5\windows directory to the - corresponding directories under hdf5. - - 2. Open the HDF5 library project in Visual Studio - - Invoke Microsoft Visual Studio. From the main menu, go to "File" and - select the "Open Solution" option. Then open the - c:\MyHDFstuff\hdf5\windows\proj\all\all.sln solution. - - You should find Windows project files listed as "all", "big", etc. on the - left. - - 3. (Optional) Disable HDF5 C++ and High level C++ - - In HDF5 1.9, C++ and HL C++ libraries are built by default. To opt-out, - you must explicitly disable them. - - 3.1 Skip this step if you do want to build HDF5 High-Level C++ libraries - - Go to "Project" and select "Project Dependencies". Select "all", and - disable all of the following projects: - - hdf5_hl_cpp - hdf5_hl_cppdll - hl_test_table_cpp - hl_test_table_cppdll - - 3.2 Skip this step if you do want to build HDF5 High-Level libraries - - Go to "Project" and select "Project Dependencies". Select "all", and - disable all of the project files listed in the previous step, as well - as the following projects: - - hdf5_hl - hdf5_hldll - hl_test_image - hl_test_imagedll - hl_test_lite - hl_test_litedll - hl_test_table - hl_test_tabledll - hl_test_ds - hl_test_dsdll - hl_test_packet - hl_test_packetdll - - Note: Disabling some projects will likely produce false errors in the - testing script. Check the output carefully to ensure that the - errors are related to the disabled projects, and then safely - ignore them. - - - 4. Select "Build", then Select "Configuration Manager". - - 4.1 To build debug static libraries, debug multithreaded DLLs, and tests: - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build debug - version of project "all". - - 4.2 To build release static libraries, multithreaded DLLs and tests: - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build release - version of project "all". - - Release version must be built for testing, debug version is optional. - - Warning messages can be ignored. - - When the debug or release build is done the directories - listed below will contain the following files: - - c:\MyHDFstuff\hdf5\proj\hdf5\debug - - - hdf5d.lib- the hdf5 static library - - c:\MyHDFstuff\hdf5\proj\hdf5\release - - - hdf5.lib- the hdf5 static library - - c:\MyHDFstuff\hdf5\proj\hdf5dll\debug - - - hdf5ddll.dll- DLL - hdf5ddll.lib- the DLL export library - - c:\MyHDFstuff\hdf5\proj\hdf5dll\release - - - hdf5dll.dll- DLL - hdf5dll.lib- the DLL export library - - c:\MyHDFstuff\hdf5\test\libtest\debug - - and c:\MyHDFstuff\hdf5\test\libtest\release - - - libtest.lib - the internal library for test - - c:\MyHDFstuff\hdf5\test\libtestdll\debug - - - libtestddll.dll - the internal DLL for test - libtestddll.lib - the internal DLL export library for test - - c:\MyHDFstuff\hdf5\test\libtestdll\release - - - libtestdll.dll - the internal DLL for test - libtestdll.lib - the internal DLL export library for test - - c:\MyHDFstuff\hdf5\tools\toolslib\debug - - and c:\MyHDFstuff\hdf5\tools\toolslib\release - - - toolslib.lib- the internal tools library - - c:\MyHDFstuff\hdf5\tools\toolslibD\debug - - and c:\MyHDFstuff\hdf5\tools\toolslibD\release - - - toolslibD.dll- DLL - toolslibD.lib- the internal DLL export library for tools - - c:\MyHDFstuff\hdf5\tools\"tools directory"- - where tools are located - - The directories listed below will contain the following files - ONLY when you choose to build HDF5 C++ libraries: - - c:\MyHDFstuff\hdf5\proj\hdf5_cpp\debug - - - hdf5_cppd.lib- the HDF5 C++ API static library - - and c:\MyHDFstuff\hdf5\proj\hdf5_cpp\release - - - hdf5_cpp.lib- the HDF5 C++ API static library - - c:\MyHDFstuff\hdf5\proj\hdf5_cppdll\debug - - - hdf5_cppddll.dll- the HDF5 C++ API DLL - hdf5_cppddll.lib - the C++ API export library - - and c:\MyHDFstuff\hdf5\proj\hdf5_cppdll\release - - - hdf5_cppdll.dll- the HDF5 C++ API DLL - hdf5_cppdll.lib- the C++ API DLL export library - - - The directories listed below will contain the following files - ONLY when you choose to build HDF5 High Level libraries: - - c:\MyHDFstuff\hdf5\proj\hdf5_hl\Release - - hdf5_hl.lib - HDF5 High Level static Library - - and c:\MyHDFstuff\hdf5\proj\hdf5_hl\Debug - - - hdf5_hld.lib - HDF5 High Level Static Library - - c:\MyHDFstuff\hdf5\proj\hdf5_hldll\Release - - hdf5_hldll.dll - HDF5 High Level DLL - hdf5_hldll.lib - HDF5 High Level export Library - - and c:\MyHDFstuff\hdf5\proj\hdf5_hldll\Debug - - - hdf5_hlddll.dll - HDF5 High Level DLL - hdf5_hlddll.lib - HDF5 High Level export Library - - The directories listed below will contain the following files - ONLY when you choose to build HDF5 High Level C++ libraries: - - c:\MyHDFstuff\hdf5\proj\hdf5_hl_cpp\Release - - - hdf5_hl_cpp.lib - HDF5 High Level C++ Static Library - - and c:\MyHDFstuff\hdf5\proj\hdf5_hl_cpp\Debug - - - hdf5_hl_cppd.lib - HDF5 High Level C++ Static Library - - c:\MyHDFstuff\hdf5\proj\hdf5_hl_cppdll\Release - - and c:\MyHDFstuff\hdf5\proj\hdf5_hl_cppdll\Debug - - - hdf5_hl_cppddll.dll - HDF5 High Level C++ DLL - hdf5_hl_cppddll.lib - HDF5 High Level C++ export Library - - -STEP 2: Testing HDF5 Libraries and Tools - -HDF5 libraries and tools should be tested to make sure that they were built -correctly. - -Note: The complete testing suite can take a long time to run on even fast - machines. Some of the longer tests can be automatically shortened by - defining an environment variable HDF5TestExpress. Set HDF5TestExpress - to 3 for fastest, or 0 for slowest. For example: - - set HDF5TestExpress=3 - - If the variable is unset, it takes on the value 1. Note that when - HDF5TestExpress is set to 2 or 3, some features may not be thoroughly - tested. For most users, we recommend not setting this variable. - - -We provide 2 options for users to test HDF5 libraries and tools. - - Option 1: Automatic testings - - HDF5 comes with various test suites, all of which can be tested with - hdf5check.bat batch file in c:\MyHDFstuff\hdf5 directory. - - hdf5check batch file can be run with one of the following four options: - - hdf5check Test HDF5 C library and tools only. - - hdf5check enablecpp Test HDF5 C/C++ libraries and tools. To use - this option, HDF5 C++ libraries must have been - built in step I. - - hdf5check enablefortran Test HDF5 C/Fortran libraries and tools. To - use this option, HDF5 Fortran libraries must - have been built in Section VI. - - hdf5check enableall Test HDF5 C/C++/Fortran libraries and tools. - To use this option, HDF5 C++ and Fortran - libraries must have been built. - - nodebug -- can be added to any of the above to - not test debug versions - - Invoke a command prompt window and run hdf5check with appropriate option. - Users are encouraged to pipe the test output into a file. You should find - no "*FAILED*" marks. - - Option 2: Step-by-step HDF5 libraries and tools testings - - You can also test HDF5 libraries and tools one by one. There are possibly - four versions of HDF5 libraries and tools testings. - - They are: - - release - release dll - debug - debug dll - - We strongly suggest you to redirect your testing results into an output file - so that you can easily check the testing results. - - HDF5 DLLs should be placed into the Windows system directory. A batch file - named install_dll.bat is included in c:\MyHDFstuff\hdf5 directory. Run this - batch file and all neccessary HDF5 DLLS will be placed in the system - directory. - - - 1. HDF5 library testing - - Open a command prompt in the hdf5\test directory - - (1) Basic tests - - a) Release Static, type: - checktests release >"Your output filename" - - b) Release DLL, type: - checktests release dll >"Your output filename" - - c) Debug Static, type: - checktests debug >"Your output filename" - - d) Debug DLL, type: - checktests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - 2. HDF5 performance testing - - Open a command prompt in the hdf5\perform directory - - a) Release Static, type: - checkperformtests release >"Your output filename" - - b) Release DLL, type: - checkperformtests release dll >"Your output filename" - - c) Debug Static, type: - checkperformtests debug >"Your output filename" - - d) Debug DLL, type: - checkperformtests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - 3. HDF5 tools testing - - Open a command prompt in the hdf5\tools directory - - a) Release Static, type: - checktools release >"Your output filename" - - b) Release DLL, type: - checktools release dll >"Your output filename" - - c) Debug Static, type: - checktools debug >"Your output filename" - - d) Debug DLL, type: - checktools debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - 4. HDF5 C++ library test - - Skip this step UNLESS you have built HDF5 C++ libraries and want to test - them. - - Open a command prompt in the hdf5\c++\test directory - - a) Release Static, type: - checkcpptests release >"Your output filename" - - b) Release DLL, type: - checkcpptests release dll >"Your output filename" - - c) Debug Static, type: - checkcpptests debug >"Your output filename" - - d) Debug DLL, type: - checkcpptests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - 4. HDF5 High-Level library test - - Skip this step UNLESS you have built HDF5 High-Level libraries and want to - test them. - - Open a command prompt in the hdf5\hl\test directory - - a) Release Static, type: - checkhltests release >"Your output filename" - - b) Release DLL, type: - checkhltests release dll >"Your output filename" - - c) Debug Static, type: - checkhltests debug >"Your output filename" - - d) Debug DLL, type: - checkhltests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - 5. HDF5 High-Level C++ library test - - Skip this step UNLESS you have built HDF5 High-Level C++ libraries and want - to test them. - - Open a command prompt in the hdf5\hl\c++\test directory - - a) Release Static, type: - checkhlcpptests release >"Your output filename" - - b) Release DLL, type: - checkhlcpptests release dll >"Your output filename" - - c) Debug Static, type: - checkhlcpptests debug >"Your output filename" - - d) Debug DLL, type: - checkhlcpptests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - Note: See Section VI for instructions on testing Fortran libraries. - - STEP 3: Installing HDF5 Libraries - -We provide a batch file for users to relocate all HDF5 libraries in one folder -(C++ and Fortran libraries will also be copied into this folder if they have -been built in step I or Section VI, respectively). The file is called -installhdf5lib.bat under c:\MyHDFstuff\hdf5 directory. Run the batch file, you -may see a folder called hdf5lib under c:\MyHDFstuff\hdf5. - -The layout of should be: - - release\include -- HDF5 header files - release\bin -- HDF5 static tool executables - release\bindll -- HDF5 DLL tool executables - release\lib -- HDF5 static libraries - release\dll -- HDF5 DLLs - -You may also find the similar layout for the . - -======================================================================== - Section III: How To Build Examples (Optional) -======================================================================== - -Simple examples have been provided for users to test HDF5 C/C++/Fortran and -High level C/Fortran library and tools. - -Note: - 1) To build HDF5 C++ examples, HDF5 C++ library must have been built in - Step I. - - 2) To build HDF5 Fortran or HL Fortran examples, please see Section VI, - Step 3. - - 3) To build HDF5 High Level C examples, HDF5 High level library must have - been built in step I. - - 4) By default, the debug versions of HDF5 C/C++/HL examples are linked - with the debug versions of HDF5 C/C++/HL libraries and DLLs. The - debug versions of HDF5 C/C++/HL examples will fail if they are linked - with HDF5 binary distribution, which only includes the release - versions of HDF5 C/C++ libraries and DLLs. - -To build and test HDF5 C examples: ----------------------------------- - 1. Invoke Microsoft Visual Studio, go to "File" and select the "Open - Solution" option. - - Then open the solution - c:\MyHDFstuff\hdf5\windows\examples\allexamples\allexamples.sln. - - 2. Select "Build", and "Configuration Manager". - - 2.1 To build debug versions of C examples: - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - debug version of project "allexamples". - - 2.2 To build release versions of C examples. - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - release version of project "allexamples". - - When the debug and release build is done, there should be the following - subdirectories in c:\MyHDFstuff\hdf5\examples\ - - attributetest - attributetestdll - chunkread - chunkreaddll - compoundtest - compoundtestdll - extendwritetest - extendwritetestdll - grouptest - grouptestdll - readtest - readtestdll - selectest - selectestdll - writetest - writetestdll - - 3. Invoke a command prompt window and run the batch file InstallExamples.bat - which resides in the top level directory (c:\MyHDFstuff\hdf5). This file - creates 4 new directories, examplesREL, examplesRELDLL, examplesDBG, and - examplesDBGDLL, in the c:\MyHDFstuff\hdf5\examples directory and places - all the executables in it. Both the release and debug versions of the - examples should be built before this step is done. - - 4. We provide a batch file named testExamples.bat and an expected examples - tests output file named testExamples_exp_output.txt in - c:\MyHDFstuff\hdf5\examples directory for you to test HDF5 C examples. - - testExamples.bat batch file has 4 options: - - testExamples release -- for release version - - testExamples release dll -- for release DLL version - - testExamples debug -- for debug version - - testExamples debug dll -- for debug DLL version - - Invoke a command prompt and run testExamples.bat with appropriate options. - You should get "All HDF5 C examples tests passed." when the C examples are - built successfully. Otherwise, the difference between the expected - outputs and actual outputs will be given. - -To build and test HDF5 C++ examples: ------------------------------------- - - 1. Invoke Microsoft Visual Studio, go to "File" and select the "Open - Solution" option. - - Then open the solution - c:\MyHDFstuff\hdf5\windows\examples\allexamples\allcppexamples.sln. - - 2. Select "Build", and "Configuration Manager". - - 2.1 To build debug versions of C examples: - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - debug version of project "allcppexamples". - - 2.2 To build release versions of C examples. - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - release version of project "allcppexamples". - - When the debug build or release build is done, there should be the following - subdirectories in c:\MyHDFstuff\hdf5\c++\examples\ - - chunks - chunksdll - compound - compounddll - create - createdll - extend_ds - extend_dsll - h5group - h5groupdll - readdata - readdatadll - writedata - writedatadll - - 3. Invoke a command prompt window and run the batch file - InstallcppExamples.bat which resides in the top level directory - (c:\MyHDFstuff\hdf5). This file creates 4 new directories, - cppexamplesREL, cppexamplesRELDLL, cppexamplesDBG, and cppexamplesDBGDLL, - in the c:\MyHDFstuff\c++\examples directory and places all the executables - in it. Both the release and debug versions of the examples should be - built before this step is done. - - 4. We provide a batch file named testcppExamples.bat in - c:\MyHDFstuff\hdf5\c++\examples directory for you to test HDF5 C++ - examples. - - testcppExamples.bat batch file has 4 options: - - testcppExamples release -- for release version - - testcppExamples release dll -- for release DLL version - - testcppExamples debug -- for debug version - - testcppExamples debug dll -- for debug DLL version - - Invoke a command prompt and run testcppExamples.bat with appropriate - options. You should get "All HDF5 C++ examples tests passed." when the - C++ examples are built successfully. Otherwise, the difference between - the expected outputs and actual outputs will be given. - - -To build and test HDF5 High Level C examples: ---------------------------------------------- - - 1. Invoke Microsoft Visual Studio, go to "File" and select the "Open - Solution" option. - - Then open the solution - c:\MyHDFstuff\hdf5\windows\hl\examples\allhlcexamples\allhlcexamples.sln - - 2. Select "Build", and "Configuration Manager". - - 2.1 To build debug versions of C examples: - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - debug version of project "allhlcexamples". - - 2.2 To build release versions of C examples. - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - release version of project "allhlcexamples". - - When the debug and release build is done, binaries will be built in the - following subdirectories of c:\MyHDFstuff\hdf5\examples\ - - ex_image[1-2](dll) - ex_lite1(dll) - ex_table[01-12](dll) - ex_ds1(dll) - ptExample[FL+VL](dll) - - 3. Invoke a command prompt and run the batch file Install_hlcexamples.bat - which resides in the top level directory (c:\MyHDFstuff\hdf5). This file - creates 4 new directories, HLCexamplesRELEASE, HLCexamplesRELEASEDLL, - HLCexamplesDEBUG, and HLCexamplesDEBUGDLL, in the - c:\MyHDFstuff\hdf5\hl\examples directory and places all the executables in - it. Both the release and debug versions of the examples should be built - before this step is done. - - 4. We provide a batch file named test_hl_cexamples.bat in - c:\MyHDFstuff\hdf5\hl\examples directory for you to test HDF5 high level C - examples. - - test_hl_cexamples.bat batch file has 4 options: - - Options purpose - - test_hl_cexamples release -- for release version - - test_hl_cexamples release dll -- for release DLL version - - test_hl_cexamples debug -- for debug version - - test_hl_cexamples debug dll -- for debug DLL version - - Invoke a command prompt window and run test_hl_cexamples with - appropriate options. - - Invoke a command prompt and run testExamples.bat with appropriate options. - You should get "All of the HL C Examples Passed!" when the HL C examples - are built successfully. Otherwise, the difference between the expected - outputs and actual outputs will be given. - - -======================================================================== - Section IV: Building an application using the HDF5 library or DLL -======================================================================== - -Waring: The instructions below will only describe how to build an application - using the release version of the HDF5 library or DLL. To use the debug - version of the HDF5 library or DLL, you need to substitute the release - version of the HDF5 library or DLL with the debug version. - - -To build an application that uses the HDF5 static library the following -locations will need to be specified for locating header files and linking with -the HDF static library, for example: - -c:\MyHDFstuff\hdf5\hdf5lib\release\include -c:\MyHDFstuff\hdf5\hdf5lib\release\lib - -We assume that you will use Zlib and Szip compression with HDF5 library. - -1. Specifying Include Directories - -To specify the include directories in the settings for your Visual Studio -project, you may choose one of the following two methods. - - Method One: Project-wide Settings - - 1. Open your project in Microsoft Visual Studio and make sure it is the - active project. - - 2. Go to the Project menu and chose the "Properties" option. - - 3. Choose the build configuration you would like to modify in the drop - down menu labeled "Configuration:" - - 4. Choose the "C/C++" tab, and select "General". - - 5. In a text-area labeled with "Additional Include Directories:", add - HDF5, Zlib, and Szip header files directories. For example: - - c:\MyHDFstuff\hdf5\hdf5lib\release\include - c:\zlib\include - c:\szip\include - - Then click OK. - - 6. (Optional) To use HDF5 Fortran static library, the location of - Fortran module files should be specified by following Project-> - Settings->Fortran->Preprocessor, and in the text-area labeled - "Additional Include Directories", add HDF5 Fortran module files - directories. For example: - - c:\MyHDFstuff\hdf5\hdf5lib\release\include - - Method Two: Visual Studio Settings - - 1. In Visual STudio, go to Tools->Options->Projects-> - VC++ Directories. Under "Show Directories For", select "Include files" - - 2. Insert the correct HDF5, Zlib, Szip paths for headers(include). For - example, - - c:\MyHDFstuff\hdf5\hdf5lib\release\include - c:\zlib\include - c:\szip\include - - -2. Specifying Library Directories - -To specify the library directories in the settings for your Visual Studio -project, you may choose one of the following two methods. - - Method One: Project-wide Settings - - 1. Open your project in Microsoft Visual Studio and make sure it is the - active project. - - 2. Go to the Project menu and chose the "Properties" option. - - 3. Choose the build configuration you would like to modify in the drop - down menu labeled "Configuration:" - - 4. Choose the "Linker" tab, and select "General". - - 5. In a text-area labeled with "Additional Library Directories:", add - HDF5, Zlib, and Szip library files directories. For example: - - c:\MyHDFstuff\hdf5\hdf5lib\release\lib - c:\zlib\dll - c:\szip\dll - - Note: To link with HDF5 DLLs rathern that static libraries, simply - specify the "dll" directory rather than "lib", and link with the - corresponding DLL link library below. - - Then click OK. - - - Method Two: Visual Studio Settings - - 1. In Visual STudio, go to Tools->Options->Projects-> - VC++ Directories. Under "Show Directories For", select "Library files" - - 2. Insert the correct HDF5, Zlib, Szip paths for link libraries. For - example, - - c:\MyHDFstuff\hdf5\hdf5lib\release\lib - c:\zlib\dll - c:\szip\dll - - Note: To link with HDF5 DLLs rathern that static libraries, simply - specify the "dll" directory rather than "lib", and link with the - corresponding DLL link library below. - - -3. Specifying Libraries to Link - - To link the HDF5 static library with your application: - - 1. In Visual Studio, go to the Project menu and choose "Properties". - - 2. Find the "Link" option and "Input" category. In the "Additional - Dependencies" field, insert "zlib.lib, libszip.lib, hdf5.lib". - - 3. (Optional) Also insert "hdf5_cpp.lib" if you want to use HDF5 C++ - static library. - - 4. (Optional) Also insert "hdf5_fortran.lib" if you want to use HDF5 - Fortran static library. - - 5. (Optional) Also insert "hdf5_hl.lib" if you want to use HDF5 high - level static library. - - 6. (Optional) Also insert "hdf5_hl_cpp.lib" if you want to use HDF5 High - Level C++ static library. - - 7. (Optional) Also insert "hdf5_hl_fortran.lib" if you want to use HDF5 - High Level Fortran static library. - - - To link the HDF5 DLL library with your application: - - 1. Follow the steps for linking the HDF5 static library as shown above, - except now link the export library that is created with the DLL. - - The export library is called hdf5dll.lib for HDF5 C libray, - hdf5_cppdll.lib for HDF5 C++ library, and hdf5_fortrandll.lib - for HDF5 Fortran library. - - 2. In the Project Properties dialog, go to the C/C++ > Preprocessor - subsection. In the "Preprocessor Definitions" box, add "_HDF5USEDLL_" - to the list. - - 3. (Optional) Also add HDF5CPP_USEDLL to use HDF5 C++ DLL. - - 4. (Optional) Also add _HDF5USEHLDLL_ to use HDF5 high level DLL. - - 5. (Optional) Also add HDF5USE_HLCPPDLL use HDF5 high level C++ DLL. - - 6. (Optional) Follow Project->Settings->Fortran->Category->General-> - Predefined Preprocess or Symbols, and add "HDF5F90_WINDOWS" to use HDF5 - Fortran DLL. - - 7. Place the DLLs in a location that Windows will be able to locate. The - searched path and order for DLL's is - - a) The directory where the executable module for the current - process is located. - b) The current directory. - c} The Windows system directory. The GetSystemDirectory function - retrieves the path of this directory. - d) The Windows directory. The GetWindowsDirectory function - retrieves the path of this directory. - e) The directories listed in the PATH environment variable. - -======================================================================== - Section V: How to disable Gzip(Zlib)/Szip compression -======================================================================== - -Warning: When you modify the H5pubconf.h file as described below, DO NOT just - change the values of these macros from 1 to 0. Please DO remove (or - comment out) appropriate lines. - - Notes: - - To disable Gzip and Szip at the same time, just make the appropriate - modifications to H5pubconf.h and the environmental variables all together, - and then Run-compile. - - These instructions assume that copy_hdf.bat has already been run in Section - II. If you can't find H5pubconf.h file in the specified directory, please - verify that this script has been run. - - 1. Disable Gzip (Zlib) Compression - - If you would like to remove Gzip compression from the HDF5 library, follow - the steps below. - - 1.1 Open the H5pubconf.h file from the c:\MyHDFstuff\hdf5\src directory - and remove (or comment out) the following two lines: - - #define H5_HAVE_ZLIB_H 1 - #define H5_HAVE_FILTER_DEFLATE 1 - - Then save the file. - - 1.2 Delete HDF5_EXT_ZLIB environment variable if you have set it in - preconditions. - - 1.3 Run-compile HDF5 library according to Section II. - - When you disable Gzip, you may get the following message when building - HDF5 libraries: "The following environment variables were not found: - $(HDF5_EXT_ZLIB)". This message can be ignored. - - 2. Disable Szip Compression (both encoder and decoder) - - If you would like to remove Szip compression from the HDF5 library, follow - the steps below. - - 2.1 Open the H5pubconf.h file from the c:\MyHDFstuff\hdf5\src directory - and remove (or comment out) the following two lines: - - #define H5_HAVE_SZLIB_H 1 - #define H5_HAVE_FILTER_SZIP 1 - - Then save the file. - - 2.2 Delete HDF5_EXT_SZIP environment variable if you have set it in - preconditions. - - 2.3 Run-compile HDF5 library according to Section II. - - When you disable Szip, you may get the following message when building - HDF5 libraries: "The following environment variables were not found: - $(HDF5_EXT_SZIP)". This message can be ignored. - - 3. Disable Szip Encoder - - If you would like to just disable Szip encoder from the HDF5 - library while keeping Szip decoder enabled, follow the steps - below. - - 3.1 Download Szip library without encoder - - Szip library is different if you want to disable Szip encoder. - Download szip-noenc binaries from - ftp://ftp.hdfgroup.org/lib-external/szip/2.1/bin/windows. The Szip - library and header path should also be set up accordingly (refer to - precondition 6). - - 3.2 Run-compile HDF5 library according to Section II. The encoding - functionality is detected dynamically. - -======================================================================== - Section VI: How to build HDF5 with Fortran Support -======================================================================== - -Notes: 1. For Intel Compiler users, Intel fortran Compiler10.1 is - currently supported. Intel Compiler verion 7.x, 8.x and - 9.x are no longer supported. Intel Compiler 11.1 can be used, however - the fortran project files must be upgraded from within the IDE. - - 2. The Compaq Fortran Compiler is no longer supported for HDF5 1.8. - - 3. Visual Studio 2008 is supported only with Intel Fortran 10.1 and 11.1. - - 4. Parallel builds should be disabled. To do so: Go to Tools > - Options > Projects and Solutions > Build and Run. Set "Maximum Number - of Parallel Project Builds" to 1. - - - Preconditions: - - a. Setup Szip Library for Intel Compiler. - - Szip source codes or binaries for Windows compilers can be downloaded - from the following address: - - ftp://ftp.hdfgroup.org/lib-external/szip/2.1/bin/windows. - - b. Set up path for external libraries and headers - - Skip this part if you don't want to use ANY compression features - provided by HDF5. Instead, read Section V. - - You have to read this part even if you want to use only Zlib - or Szip. You also need to read Section V. - - 1) Invoke Microsoft Visual Studio. - - 2) From the main menu, Go to Tools > Options > Intel(R) Fortran. In the - right panel, make sure your "Selected Compiler" is Intel Fortran. - - 3) Select the right-most box for "Libraries", and add Zlib and Szip - library paths (c:\zlib\dll, c:\szip\dll for example). - - 4) Select right-most box for "Includes", and add Zlib and Szip header - paths (c:\zlib\include c:\szip\include, for example). - - 5) Then click "OK". - - -1. Build with Intel Fortran Compiler 11.1 under Visual Studio 2008 - - Note: This step will build HDF5 Static and DLL C and C++ Library using - Visual Studio compiler as well as HDF5 Static and High Level - Fortran Library using Intel Fortran 11.1 Compiler. - - 1.1 Open all_fortran.sln - - Invoke Microsoft Visual Studio. From the main menu, - go to "File" and select "Open Solution". Choose "all_fortran.sln" - under the directory c:\MyHDFstuff\hdf5\windows\proj\all_fortran. - - - 1.2 Build as Normal - - Follow steps as in Section II to build all HDF5 library files, including - Fortran and HL Fortran libraries. - - -2. Test HDF5 Static and High Level Fortran Library - - We provide 2 options for users to test HDF5 libraries and tools. - - Option 1: Automatic testings - - HDF5 comes with various test suites, all of which can be tested with - hdf5check.bat batch file in c:\MyHDFstuff\hdf5 directory. - - hdf5check batch file can used to test HDF libraries with Fortran with - the following options: - - hdf5check enablefortran Test HDF5 C/Fortran libraries and tools - - - hdf5check enableall Test HDF5 C/C++/Fortran libraries and tools - To use this option, HDF5 C++ and Fortran - libraries must have been built. - - Invoke a command prompt window and run hdf5check with appropriate option. - Users are encouraged to redirect their ouput into a file. There should - be no "*FAILED*" marks. - - Option 2: Step-by-step HDF5 libraries and tools testings - - Note: This section provides step-by-step instructions for testing the - Fortran librariy and tools only. To test the rest of the HDF5 library - and tools, please see Section II, Step 2. - - - a. Test HDF5 Static Fortran Library - - Open a command prompt in the hdf5\fortran\test directory - - a) Release Static, type: - checkfortrantests release >"Your output filename" - - b) Release DLL, type: - checkfortrantests release dll >"Your output filename" - - c) Debug Static, type: - checkfortrantests debug >"Your output filename" - - d) Debug DLL, type: - checkfortrantests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - b. Test HDF5 High Level Fortran Library - - Open a command prompt in the hdf5\hl\fortran\test directory - - a) Release Static, type: - checkhlfortrantests release >"Your output filename" - - b) Release DLL, type: - checkhlfortrantests release dll >"Your output filename" - - c) Debug Static, type: - checkhlfortrantests debug >"Your output filename" - - d) Debug DLL, type: - checkhlfortrantests debug dll >"Your output filename" - - Use a text editor to check results. You should not find any FAILED marks - in your output files. - - -3. (Optional) Build HDF5 Fortan and HL Fortran Examples - - Note: This section only covers building Fortran and HL Fortran examples. - For other examples, please see Section III. - - To build and test HDF5 Fortran example: - --------------------------------------- - - 1. Open allf90examples.sln - - Invoke Microsoft Visual Studio. From the main menu, - go to "File" and select "Open Solution". Choose "allf90examples.sln" - under the directory - c:\MyHDFstuff\hdf5\windows\fortran\examples\allf90examples. - - 2. Select "Build", then Select "Configuration Manager". - - 2.1 To build debug versions of Fortran examples. - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - debug version of project "allf90examples". - - 2.2 To build release versions of Fortran examples. - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - release version of project "allf90examples". - - When the debug build or release build is done, there should be the - following subdirectories in c:\MyHDFstuff\hdf5\fortran\examples\ - - attreexampletest - attreexampletestdll - compoundtest - compoundtestdll - dsetexampletest - dsetexampletestdll - fileexampletest - fileexampletestdll - groupexampletest - groupexampletestdll - grpdsetexampletest - grpdsetexampletestdll - grpittest - grpittestdll - grpsexampletest - grpsexampletestdll - hyperslabtest - hyperslabtestdll - mountexampletest - mountexampletest - refobjexampletest - refobjexampletestdll - refregexampletest - refregexampletestdll - rwdsetexampletest - rwdsetexampletestdll - selecteletest - selecteletestdll - - 3. Invoke a command prompt and run the batch file Installf90Examples.bat - which resides in the top level directory (c:\MyHDFstuff\hdf5). This - file creates 4 new directories, f90examplesREL, f90examplesRELDLL, - f90examplesDBG, and f90examplesDBGDLL, in the - c:\MyHDFstuff\fortran\examples directory and places all the - executables in it. Both the release and debug versions of the - examples should be built before this step is done. - - - To build and test HDF5 High Level Fortran examples: - --------------------------------------------------- - - 1. Open allhlf90examples.sln - - Invoke Microsoft Visual Studio. From the main menu, - go to "File" and select "Open Solution". Choose - "allhlf90examples.sln" under the directory - c:\MyHDFstuff\hdf5\windows\hl\fortran\examples\allhlf90examples. - - 2. Select "Build", then Select "Configuration Manager". - - 2.1 To build debug versions of Fortran examples. - - In "Active Solution Configuration", select "Debug". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - debug version of project "allhlf90examples". - - 2.2 To build release versions of Fortran examples. - - In "Active Solution Configuration", select "Release". Select "Close". - Select "Build" -> "Build Solution" or "Rebuild Solution" to build - release version of project "allhlf90examples". - - When the debug build or release build is done, there should be the - following subdirectories in c:\MyHDFstuff\hdf5\hl\fortran\examples - - ex_lite - ex_litedll - - 3. Invoke a command prompt and run the batch file - Install_hlf90examples.bat which resides in the top level directory - (c:\MyHDFstuff\hdf5). This file creates 4 new directories, - HLf90examplesRELEASE, HLf90examplesRELEASEDLL, HLf90examplesDEBUG, - and HLf90examplesDEBUGDLL, in the - c:\MyHDFstuff\hdf5\hl\fortran\examples directory and places all - the executables in it. Both the release and debug versions of the - examples should be built before this step is done. - - 4. We provide a batch file named test_hl_f90examples.bat in - c:\MyHDFstuff\hdf5\hl\fortran\examples directory for you to test - HDF5 high level fortran examples. - - test_hl_f90examples.bat batch file has 4 options: - - Options purpose - - test_hl_f90examples release -- for release version - - test_hl_f90examples release dll -- for release DLL version - - test_hl_f90examples debug -- for debug version - - test_hl_f90examples debug dll -- for debug DLL version - - Invoke a command prompt and run test_hl_f90examples with - appropriate options. - - When you run "test_hl_f90examples release", the output will look - like: - - release version of High Level Fortran examples PASSED - - Similar messages should be generated with another three options - If the high level Fortran examples are built successfully. - -======================================================================== - Section VII : How to build Multi-threaded version of HDF5 library -======================================================================== - -Notes: In Visual Studio 2008, the Single-threaded runtime libraries have been - depreciated, and Multi-threaded is built by default. Therefore, no extra - work needs to be done to build Multi-threaded libraries in Visual Studio - 2008. - - -======================================================================== - Section VIII: How To Build And Test HDF5 With Thread-Safe Feature -======================================================================== - - All of the preconditions in "Preconditions" Section at the beginning of this - document also apply to this section. There are some extra preconditions for - this section only as following. - - Pre1. Pthread-Win32 Installed - - Posix Threads for Windows is a open source free software. Users can download - it from http://sources.redhat.com/pthreads-win32/. - - HDF5 release 1.8 supports Pthread-Win32 2.7.0 (2005-06-04) or later. Since - pthreadVC2.dll used by HDF5 1.8 is the release version dll of - pthread-win32, ONLY HDF5 1.8 release dll are supported and tested on - Windows XP. - - Pre2. Set Path for Pthread-Win32 header and library - - Invoke Microsoft Visual Studio, go to Tools->Options->Projects->VC++ - Directories. - - From the drop-down box under "Show directories for:", - - Choose "Include files", add in the path to Pthread-Win32 header file (For - example: C:\PTHREADS_WIN32\INCLUDE). - - Choose "Library files", add in the path to Pthread-Winew library (For - example: C:\PTHREADS_WIN32\LIB). - - Pre3. Enable HDF5 Thread-safe Feature on Windows - - Go to directory c:\MYHDFstuff\hdf5\windows\src, open H5pubconf.h and find the - following messages and remove those comment signs referred to by those two - arrows and save H5pubconf.h - - - /*Users want to build and test hdf5 library with thread safe enabled, - Make the following block active - */ - - /* <---- - #if defined _DLL - #define H5_HAVE_THREADSAFE - #define H5_HAVE_SYSTEM_SCOPE_THREADS 1 - #if defined TTSAFE_H - #define sleep Sleep - #endif - #endif - */ <---- - - - Pre4. Define Environment Variable(HDF5_EXT_PTHREAD) for PthreadVC2.lib - - To define this environment variable: - - Click "Start" -> "Control Panel" -> "System" -> "Advanced" -> - "Environment Variables". - - If you are logged on as administrator to the local computer AND want to - let all other users use these two environment variables, click "New" under - "System Variables" box; otherwise, click "New" under "User Variables" box. - - In the New Variable window, set - "Variable name" as HDF5_EXT_PTHREAD - "Variable value" as pthreadVC2.lib - - Click OK. - - pre5. Copy pthreadVC2.dll to System Directory - - pthreadVC2.dll should be copied into the location that applications can - find. One suggestion is to use the c:\WINDOWS\system. - - -1. Build HDF5 Release DLL with Thread-safe Feature - - 1.1 Run batch file copy_hdf.bat. - - Go to c:\MyHDFstuff\hdf5\windows and run copy_hdf.bat. This process will - copy all the necessary batch files, Windows-specific source code and text - files saved under c:\MyHDFstuff\hdf5\windows directory to the corresponding - directories under hdf5. - - - 1.2 Invoke Microsoft Visual Studio - - Invoke Microsoft Visual Studio. From the main menu, go to "File" and select - the "Open Solution" option. Then open the - c:\MyHDFstuff\hdf5\windows\proj\all\all.sln workspace. - - 1.3 Add in Thread-safe Source Code for HDF5 Library - - Expand project "hdf5dll", right click on "source" and choose "Add Files to - Folder...", browse to add in file "H5TS.c" under directory - c:\MYHDFSTUFF\hdf5\src. - - 1.4 Link to pthreadVC2.lib - - Right click on project "hdf5dll", choose "Set as Active Project". - - Go to Project->Properties - - On the left pane, choose "Release" to the right of "Configuration:" - - Choose "Linker", choose "Input" from the left pane. - - Under "Additional Dependencies", add in "$(HDF5_EXT_PTHREAD)" (No - quotation marks). - - Click on "OK". - - 1.5 Set Project Active Configurations - - Go to Build->Set Active Configuration, choose "Release" under "Project - Configurations:", Click "OK". - - 1.6 Build HDF5 Release DLL with Thread-safe Feature - - Right-click on project hdf5dll and click "Build" to build HDF5 Release DLL - with thread-safe feature. - - Warning messages can be ignored. But there should be no failures at all. - -2. Test Thread-safe Feature of HDF5 Release DLL - - 2.1 Build Release Version of Project libtestdll - - Go to Build->Set Active Configuration, choose - "libtestdll-Win32 Release" under "Project configurations:", Click "OK". - - Go to Build->Build libtestdll.dll to build release version of Project - libtestdll. - - 2.2 Build Release Version of Project ttsafedll - - Go to Build->Set Active Configuration, choose "Release" under "Project - Configurations:", Click "OK". - - Right-click on project ttsafedll and click "Build" to build release version - of Project ttsafedll.exe. - - 2.3 Install hdf5dll.dll - - Invoke a comand prompt, change directory to c:\MYHDFSTUFF\hdf5, run batch - file install_dll.bat to copy - c:\MYHDFSTUFF\hdf5\proj\hdf5dll\release\hdf5dll.dll into system directory. - - 2.4 Test Thread-safe Feature of HDF5 Release DLL - - Set project ttsafedll as the active project file if it is not. Go to - Build->Execute ttsafedll.exe, the following is the test messages users - should get: - - For help use: ttsafedll.exe -help - Linked with hdf5 version 1.8 release 0 - Testing -- multi-dataset creation (dcreate) - Testing -- per-thread error stacks (error) - Testing -- thread cancellation safety test (cancel) - Testing -- multi-attribute creation (acreate) - - - All tests were successful. - - - Cleaning Up temp files... - - Users who got the same messages as above have successfully built the release - version of hdf5dll.dll. - -3. Build, Test and Install HDF5 Library and Tools - - Go back to Section II, Step I(2) to Build, test and install HDF5 libary and - tools. - -======================================================================== - Section IX: How to build HDF5 for 64-bit Windows -======================================================================== - -HDF5 can be built for 64-bit Windows in Visual Studio 2008. - -Notes: - - 1. Building 64-bit HDF5 from a 32-bit machine is also unsupported. Because - we generate source file H5tinit.c from a generated 64-bit executable, - this must be done on a 64-bit machine. - - -Prerequisites: - - 1. A 64-bit Windows machine. - - 2. Microsoft Visual Studio 2008 installed with x64 Extensions. - - -Building: - - Building 64-bit Windows binaries is very similar to the process for 32-bit. - Therefore, you may follow the instructions in Section II with the following - modifications. - - 1. The x64 platform must be selected in the build configuration for - debug and release versions. Before building, go to "Build", - "Configuration Manager". In the "Active solution platform" box, - select "x64", and press "Close". - - 2. 64-bit HDF5 must be built with 64-bit external libraries, unless - external library support is disabled. You must add the include and - library paths for x64 configurations as you have in the - "Prerequisites" section. This is also true for Intel Fortran if - Fortran libraries are to be built. If you do not wish to use - external libraries, please read Section V about disabling them. - -Testing: - - We provide a test suite to verify all libraries and tools were built - successfully. This test suite should work identically on 32- and 64-bit - builds. Therefore, you may follow the instructions in Section II about - testing. Note that because 64-bit binaries were built, these tests must - run on a 64-bit machine. - -Installing: - - We provide a script that will install all headers, libraries, and tools - into one folder, hdf5lib. This script should work identically on 32- and - 64-bit builds. Therefore, you may follow the instructions in Section II - about installing. - -======================================================================== - Section X: How to build HDF5 on Windows Vista -======================================================================== -Building on Windows Vista is very similar to building on Windows XP, with -some minor changes. Therefore, follow the build instructions above, with the -following considerations: - - 1. Only Visual Studio 2008 is currently supported on Windows Vista. - - 2. Elevated security permissions are required to test the HDF5 libraries. - This is because DLLs are installed in the system directory. To enable - elevated security: - - 1. In the Start menu, search for "Command Prompt". Right click on - the "Command Prompt" program, and select "Run as administrator." - - 2. A security dialog will pop up. Make sure you select "Continue." - - 3. Test HDF5 libraries and tools as usual using "hdf5check.bat" - script. - - -======================================================================== - Section XI: How to build HDF5 using Visual Studio 2010 -======================================================================== -Building with Visual Studio 2010 is very similar to building with Visual Studio -2008, with some minor changes. Therefore, follow the build instructions above, -with the following considerations: - - 1. Visual Studio 2010 uses a new format for project files, but Visual Studio - 2008 project files can be easily converted. The HDF5 project files - will need to be converted on first use. To do so: - - 1.1. Open the HDF5 Visual Studio 2008 solution file as in Section II - (either all.sln or all_fortran.sln if building Fortran.) - - 1.2. You will be prompted with an automatic conversion wizard. Click - through, accepting the default values. You may choose to create - backups of the project files, although it isn't necessary. - - 1.3. When it is finished, it should state that all projects were - converted successfully with no errors. Warnings can be ignored. - - 2. Once the project files have been converted, build and test normally. - Note that the converted project files aren't backwards compatible with - previous versions of Visual Studio. - - -======================================================================== - Section XII: Backwards Compatibility with HDF5 1.6 -======================================================================== - -Several basic HDF5 functions have changed over the years as requirements on -the library and data format have evolved. To enable existing applications to -run properly, all versions of these functions have been retained; for -flexibility and ease-of-use, macros have been created that can be mapped -either globally to broad sets of function versions or on a -function-by-function basis to specific versions. For example, an overall -approach can be determined by means global setting; function-level settings -can then be used to override the global setting then for specific functions. - -To enable 1.6 API symbols in your application: - - 1. Build and test HDF5 normally (see Section II). - - 2. Open your application in Visual Studio. Right click on the - project file, and select properties. - - 3. Select the C/C++ > Preprocessor pane on the left. In the list of - "Preprocessor Definitions", add "H5_USE_16_API". (Note: macros in - the list are separated by a semi-colon.) - - 4. Repeat this for each project and project configuration that uses - HDF5 libraries. - - 5. Continue to build and test your application normally. - - -======================================================================== - Section XIII: Misc. -======================================================================== - -1. Helpful Pointers - -Here are some helpful notes if you are not familiar with -using the Visual C++ Development Environment. - - 1.1 Project name and location issues: - - It is recommended that you use the given directory structure for building - HDF5. However, it is possible to create your own structure. If you must - install all.sln and all.vcproj in another directory, relative to hdf5 - directory, you will be asked to locate the sub-project files, when you open - the project all.sln. - - If you want to rename "all" (the entire project), you will need to modify - two files all.sln and all.vcproj as text (contrary to the explicit warnings - in the files). - - - 1.2 Settings... details: - - If you create your own project, the necessary settings can be read - from the all.vcproj file (as text), or from the Project Settings in the - Visual Studio project settings dialog. - - 1.3 FAQ - - Many other common questions and hints are located online and being updated - in the HDF5 FAQ. For Windows-specific questions, please see: - - http://www.hdfgroup.uiuc.edu/windows/faq.html - - For all other general questions, you can look in the general FAQ: - - http://hdfgroup.org/HDF5-FAQ.html - - -************************************************************************ - Please send email to help@hdfgroup.org for further assistance. +The old INSTALL_Windows documentation can be found in the +obsolete_windows_docs\ folder located with this document. diff --git a/release_docs/INSTALL_Windows_From_Command_Line.txt b/release_docs/INSTALL_Windows_From_Command_Line.txt index 7557441..bbb7762 100644 --- a/release_docs/INSTALL_Windows_From_Command_Line.txt +++ b/release_docs/INSTALL_Windows_From_Command_Line.txt @@ -18,7 +18,7 @@ Note: This instruction is written for users who would like to build HDF5 For all other Windows development tools, HDF5 should be built in the development environment. Please refer to INSTALL_Windows.txt for detailed HDF5 building and installation information, or - INSTALL_Windows_Short.txt for quick HDF5 building and installation + INSTALL_Windows_Short_VS2008.txt for quick HDF5 building and installation instructions. WARNINGS: @@ -85,7 +85,6 @@ notes in INSTALL_Windows.txt before starting below procedures. /vs9 Build HDF5 using Visual Studio 2008 /fort Build and test HDF5 with Fortran libraries /ivf101 Build HDF5 Fortran using Intel Visual Fortran 10.1 - /ivf111 Build HDF5 Fortran using Intel Visual Fortran 11.1 /useenv Build HDF5 using compiler settings defined in the environment, rather than the IDE. /? Help information @@ -113,7 +112,6 @@ notes in INSTALL_Windows.txt before starting below procedures. /vs9 Build HDF5 using Visual Studio 2008 /fort Build HDF5 with Fortran libraries /ivf101 Build HDF5 Fortran using Intel Visual Fortran 10.1 - /ivf111 Build HDF5 Fortran using Intel Visual Fortran 11.1 /nodebug Build HDF5 release versions only Note: Default is to build debug and release versions /useenv Build HDF5 using compiler settings defined diff --git a/release_docs/INSTALL_Windows_Short_VS2008.TXT b/release_docs/INSTALL_Windows_Short_VS2008.TXT index 8ff8866..4ec79ed 100644 --- a/release_docs/INSTALL_Windows_Short_VS2008.TXT +++ b/release_docs/INSTALL_Windows_Short_VS2008.TXT @@ -56,9 +56,18 @@ notes in INSTALL_Windows.txt before starting below procedures. find your Zlib and Szip library path (for example, c:\zlib125\dll, c:\szip\dll) from the directory list, add the library path (c:\zlib125\dll, c:\szip\dll) to the library directories. + + NOTE: + If you are using VS2010, the path settings will need to be in project + property sheets per project. Go to "Project" and select "Properties", find + "Configuration Properties", and then "VC++ Directories". + + Add the header path to the "Include Directories" setting. + + Add the library path to the "Library Directories" setting. ======================================================================== - Building HDF5 C/C++ Libraries with Visual Studio 2005 + Building HDF5 C/C++ Libraries with Visual Studio 2008 ======================================================================== 1. Run batch file copy_hdf.bat diff --git a/release_docs/INSTALL_parallel b/release_docs/INSTALL_parallel index d771c0b..b2e1eec 100644 --- a/release_docs/INSTALL_parallel +++ b/release_docs/INSTALL_parallel @@ -6,7 +6,7 @@ ----------- This file contains instructions for the installation of parallel HDF5 (PHDF5). It is assumed that you are familiar with the general installation steps as -described in the INSATLL file. Get familiar with that file before trying +described in the INSTALL file. Get familiar with that file before trying the parallel HDF5 installation. The remaining of this section explains the requirements to run PHDF5. diff --git a/release_docs/USING_CMake.txt b/release_docs/USING_CMake.txt new file mode 100644 index 0000000..71f2fcf --- /dev/null +++ b/release_docs/USING_CMake.txt @@ -0,0 +1,202 @@ +************************************************************************ +* Build and Install HDF5 Applications with CMake * +************************************************************************ + +Notes: This short instruction is written for users who want to quickly build + HDF5 Applications from the HDF5 Examples package using the CMake tools. + Users can adapt these instructions for their own applicaltions, see the + "Minimum Project Files" section. + + More information about using CMake can be found at the KitWare site, + www.cmake.org. + + CMake uses the command line, however the visual CMake tool is + available for the configuration step. The steps are similiar for + all the operating systems supported by CMake. + + NOTES: + 1. Using CMake for building and using HDF5 is under active development. + While we have attempted to provide error-free files, please + understand that development with CMake has not been extensively + tested outside of HDF. The CMake specific files may change + before the next release. + + 2. CMake was originally introduced to support development on Windows, + however it should be usable on any system where CMake is supported. + Please send us any comments on how CMake support can be improved on + any system. Visit the KitWare site for more information about CMake. + + 3. HDF5 library build and test results can be submitted to our CDash server at: + cdash.hdfgroup.uiuc.edu. + Please read the HDF and CDash document at: + www.hdfgroup.org/CDash/HowToSubmit. + + +======================================================================== + Preconditions +======================================================================== + + 1. We suggest you obtain the latest CMake for windows from the Kitware + web site. The HDF5 1.8.x product requires CMake version 2.8.6 (minimum). + + 2. You have installed the HDF5 library built with CMake, by executing the + HDF Install Utility (The *.exe file in the binary package for Windows). + If you are using a Windows platform, you can obtain a pre-built Windows + binary from The HDF Group's website at www.hdfgroup.org. + + 3. On Windows with Visual Studio, if you have installed the static HDF5 + library, you will need to add the HDF5\lib folder to the library + search list. See the "Using Static Libraries with Visual Studio" section. + + 4. Set the environment variable HDF5_ROOT to the installed location of HDF5. + On Windows HDF5_ROOT=C:\Program Files\HDF Group\HDF5\hdf5-1.8.x + (Note there are no quote characters used on windows) + +======================================================================== + Building HDF5 Applications with CMake +======================================================================== + + 1. Run CMake + + The CMake executable is named "cmake-gui.exe" on Windows and should be + available in your Start menu. For Linux, UNIX, and Mac users the + executable is named "cmake-gui" and can be found where CMake was + installed. + Specify the source and build directories. It is recommemded that you + choose a build directory different then the source directory + (for example on Windows, if the source is at c:\MyHDFstuff\hdf5, then + use c:\MyHDFstuff\hdf5\build or c:\MyHDFstuff\build\hdf5). + + OPTIONAL: + Users can perform the configuration step without using the visual cmake-gui + program. Example configuration step executed within the build directory: + + cmake -G "" [-D] + + Where is + * Borland Makefiles + * MSYS Makefiles + * MinGW Makefiles + * NMake Makefiles + * Unix Makefiles + * Visual Studio 10 + * Visual Studio 10 Win64 + * Visual Studio 6 + * Visual Studio 7 + * Visual Studio 7 .NET 2003 + * Visual Studio 8 2005 + * Visual Studio 8 2005 Win64 + * Visual Studio 9 2008 + * Visual Studio 9 2008 Win64 + + is: + * BUILD_TESTING:BOOL=ON + * USE_SHARED_LIBS:BOOL=[ON | OFF] + + 2. Configure the cache settings + + 2.1 Click the Configure button. If this is the first time you are + running cmake-gui in this directory, you will be prompted for the + generator you wish to use (for example on Windows, Visual Studio 9 2008). + CMake will read in the CMakeLists.txt files from the source directory and + display options for the HDF5 project. After the first configure you + can adjust the cache settings and/or specify locations of other programs. + + Any conflicts or new values will be highlighted by the configure + process in red. Once you are happy with all the settings and there are no + more values in red, click the Generate button to produce the appropriate + build files. + + On Windows, if you are using a Visual Studio generator, the solution and + project files will be created in the build folder. + + On linux, if you are using the Unix Makefiles generator, the Makefiles will + be created in the build folder. + + 2.2 Alternative command line example on Windows in c:\MyHDFstuff\hdf5\build directory: + + cmake -G "Visual Studio 9 2008" -DBUILD_TESTING:BOOL=ON -DUSE_SHARED_LIBS:BOOL=ON .. + + 3. Build HDF5 Applications + + On Windows, you can build HDF5 applications using either the Visual Studio Environment + or the command line. The command line is normally used on linux, Unix, and Mac. + + To build from the command line, navigate to your build directory and + execute the following; + + cmake --build . --config {Debug | Release} + + NOTE: "--config {Debug | Release}" may be optional on your platform. We + recommend choosing either Debug or Release on Windows. If you are + using the pre-built binaries from HDF, use Release. + + 3.1 If you wish to use the Visual Studio environment, open the solution + file in your build directory. Be sure to select either Debug or + Release and build the solution. + + 4. Test HDF5 Applications. + + To test the build, navigate to your build directory and execute; + + ctest . -C {Debug | Release} + + NOTE: "-C {Debug | Release}" may be optional on your platform. We + recommend choosing either Debug or Release to match the build + step on Windows. + + 6. The files that support building with CMake are all the files in the + config/cmake folder, the CMakeLists.txt files in each source folder, and + CTestConfig.cmake. CTestConfig.cmake is specific to the internal testing + performed by The HDF Group. It should be altered for the users + installation and needs. + + 7. More information about using CMake can be found at the KitWare site, + www.cmake.org. + + +======================================================================== + Using HDF5 Libraries with Visual Studio 2008 +======================================================================== + + 8. Set up path for external libraries and headers + + Invoke Microsoft Visual Studio and go to "Tools" and select "Options", + find "Projects", and then "VC++ Directories". + + 8.1 If you are building on 64-bit Windows, find the "Platform" dropdown + and select "x64". + + 8.2 Find the box "Show directories for", choose "Include files", add the + header path (i.e. c:\Program Files\HDF Group\HDF5\hdf5-1.8.7\include) + to the included directories. + + 8.3 Find the box "Show directories for", choose "Library files", add the + library path (i.e. c:\Program Files\HDF Group\HDF5\hdf5-1.8.7\lib) + to the library directories. + + 8.4 If using Fortran libraries, you will also need to setup the path + for the Intel Fortran compiler. + + +======================================================================== + Minimum C Project Files for CMake +======================================================================== + + 9. Create a CMakeLists.txt file at the source root. +.......................................................................... +cmake_minimum_required (VERSION 2.8.6) +PROJECT (HDF5MyApp C CXX) + +FIND_PACKAGE (HDF5 REQURIED) +INCLUDE_DIRECTORIES (${HDF5_INCLUDE_DIRS}) +SET (LINK_LIBS ${LINK_LIBS} ${HDF5_LIBRARIES}) + +ADD_EXECUTABLE (hdf_example ${PROJECT_SOURCE_DIR}/hdf_example.c) +TARGET_LINK_LIBRARIES (hdf_example ${LINK_LIBS}) +.......................................................................... + +************************************************************************ + +Need further assistance, send email to help@hdfgroup.org + diff --git a/release_docs/USING_Windows.txt b/release_docs/USING_Windows.txt index 410a759..9afbeb1 100644 --- a/release_docs/USING_Windows.txt +++ b/release_docs/USING_Windows.txt @@ -1,6 +1,6 @@ *********************************************************************** -* HDF5 Build and Install Instructions for Windows XP/VISTA * +* HDF5 Build and Install Instructions for Windows * * (Full Version) * *********************************************************************** @@ -659,7 +659,7 @@ using the Visual C++ Development Environment. Many other common questions and hints are located online and being updated in the HDF5 FAQ. For Windows-specific questions, please see: - http://www.hdfgroup.uiuc.edu/windows/faq.html + http://www.hdfgroup.org/windows/faq.html For all other general questions, you can look in the general FAQ: diff --git a/release_docs/Using_CMake.txt b/release_docs/Using_CMake.txt deleted file mode 100644 index 71f2fcf..0000000 --- a/release_docs/Using_CMake.txt +++ /dev/null @@ -1,202 +0,0 @@ -************************************************************************ -* Build and Install HDF5 Applications with CMake * -************************************************************************ - -Notes: This short instruction is written for users who want to quickly build - HDF5 Applications from the HDF5 Examples package using the CMake tools. - Users can adapt these instructions for their own applicaltions, see the - "Minimum Project Files" section. - - More information about using CMake can be found at the KitWare site, - www.cmake.org. - - CMake uses the command line, however the visual CMake tool is - available for the configuration step. The steps are similiar for - all the operating systems supported by CMake. - - NOTES: - 1. Using CMake for building and using HDF5 is under active development. - While we have attempted to provide error-free files, please - understand that development with CMake has not been extensively - tested outside of HDF. The CMake specific files may change - before the next release. - - 2. CMake was originally introduced to support development on Windows, - however it should be usable on any system where CMake is supported. - Please send us any comments on how CMake support can be improved on - any system. Visit the KitWare site for more information about CMake. - - 3. HDF5 library build and test results can be submitted to our CDash server at: - cdash.hdfgroup.uiuc.edu. - Please read the HDF and CDash document at: - www.hdfgroup.org/CDash/HowToSubmit. - - -======================================================================== - Preconditions -======================================================================== - - 1. We suggest you obtain the latest CMake for windows from the Kitware - web site. The HDF5 1.8.x product requires CMake version 2.8.6 (minimum). - - 2. You have installed the HDF5 library built with CMake, by executing the - HDF Install Utility (The *.exe file in the binary package for Windows). - If you are using a Windows platform, you can obtain a pre-built Windows - binary from The HDF Group's website at www.hdfgroup.org. - - 3. On Windows with Visual Studio, if you have installed the static HDF5 - library, you will need to add the HDF5\lib folder to the library - search list. See the "Using Static Libraries with Visual Studio" section. - - 4. Set the environment variable HDF5_ROOT to the installed location of HDF5. - On Windows HDF5_ROOT=C:\Program Files\HDF Group\HDF5\hdf5-1.8.x - (Note there are no quote characters used on windows) - -======================================================================== - Building HDF5 Applications with CMake -======================================================================== - - 1. Run CMake - - The CMake executable is named "cmake-gui.exe" on Windows and should be - available in your Start menu. For Linux, UNIX, and Mac users the - executable is named "cmake-gui" and can be found where CMake was - installed. - Specify the source and build directories. It is recommemded that you - choose a build directory different then the source directory - (for example on Windows, if the source is at c:\MyHDFstuff\hdf5, then - use c:\MyHDFstuff\hdf5\build or c:\MyHDFstuff\build\hdf5). - - OPTIONAL: - Users can perform the configuration step without using the visual cmake-gui - program. Example configuration step executed within the build directory: - - cmake -G "" [-D] - - Where is - * Borland Makefiles - * MSYS Makefiles - * MinGW Makefiles - * NMake Makefiles - * Unix Makefiles - * Visual Studio 10 - * Visual Studio 10 Win64 - * Visual Studio 6 - * Visual Studio 7 - * Visual Studio 7 .NET 2003 - * Visual Studio 8 2005 - * Visual Studio 8 2005 Win64 - * Visual Studio 9 2008 - * Visual Studio 9 2008 Win64 - - is: - * BUILD_TESTING:BOOL=ON - * USE_SHARED_LIBS:BOOL=[ON | OFF] - - 2. Configure the cache settings - - 2.1 Click the Configure button. If this is the first time you are - running cmake-gui in this directory, you will be prompted for the - generator you wish to use (for example on Windows, Visual Studio 9 2008). - CMake will read in the CMakeLists.txt files from the source directory and - display options for the HDF5 project. After the first configure you - can adjust the cache settings and/or specify locations of other programs. - - Any conflicts or new values will be highlighted by the configure - process in red. Once you are happy with all the settings and there are no - more values in red, click the Generate button to produce the appropriate - build files. - - On Windows, if you are using a Visual Studio generator, the solution and - project files will be created in the build folder. - - On linux, if you are using the Unix Makefiles generator, the Makefiles will - be created in the build folder. - - 2.2 Alternative command line example on Windows in c:\MyHDFstuff\hdf5\build directory: - - cmake -G "Visual Studio 9 2008" -DBUILD_TESTING:BOOL=ON -DUSE_SHARED_LIBS:BOOL=ON .. - - 3. Build HDF5 Applications - - On Windows, you can build HDF5 applications using either the Visual Studio Environment - or the command line. The command line is normally used on linux, Unix, and Mac. - - To build from the command line, navigate to your build directory and - execute the following; - - cmake --build . --config {Debug | Release} - - NOTE: "--config {Debug | Release}" may be optional on your platform. We - recommend choosing either Debug or Release on Windows. If you are - using the pre-built binaries from HDF, use Release. - - 3.1 If you wish to use the Visual Studio environment, open the solution - file in your build directory. Be sure to select either Debug or - Release and build the solution. - - 4. Test HDF5 Applications. - - To test the build, navigate to your build directory and execute; - - ctest . -C {Debug | Release} - - NOTE: "-C {Debug | Release}" may be optional on your platform. We - recommend choosing either Debug or Release to match the build - step on Windows. - - 6. The files that support building with CMake are all the files in the - config/cmake folder, the CMakeLists.txt files in each source folder, and - CTestConfig.cmake. CTestConfig.cmake is specific to the internal testing - performed by The HDF Group. It should be altered for the users - installation and needs. - - 7. More information about using CMake can be found at the KitWare site, - www.cmake.org. - - -======================================================================== - Using HDF5 Libraries with Visual Studio 2008 -======================================================================== - - 8. Set up path for external libraries and headers - - Invoke Microsoft Visual Studio and go to "Tools" and select "Options", - find "Projects", and then "VC++ Directories". - - 8.1 If you are building on 64-bit Windows, find the "Platform" dropdown - and select "x64". - - 8.2 Find the box "Show directories for", choose "Include files", add the - header path (i.e. c:\Program Files\HDF Group\HDF5\hdf5-1.8.7\include) - to the included directories. - - 8.3 Find the box "Show directories for", choose "Library files", add the - library path (i.e. c:\Program Files\HDF Group\HDF5\hdf5-1.8.7\lib) - to the library directories. - - 8.4 If using Fortran libraries, you will also need to setup the path - for the Intel Fortran compiler. - - -======================================================================== - Minimum C Project Files for CMake -======================================================================== - - 9. Create a CMakeLists.txt file at the source root. -.......................................................................... -cmake_minimum_required (VERSION 2.8.6) -PROJECT (HDF5MyApp C CXX) - -FIND_PACKAGE (HDF5 REQURIED) -INCLUDE_DIRECTORIES (${HDF5_INCLUDE_DIRS}) -SET (LINK_LIBS ${LINK_LIBS} ${HDF5_LIBRARIES}) - -ADD_EXECUTABLE (hdf_example ${PROJECT_SOURCE_DIR}/hdf_example.c) -TARGET_LINK_LIBRARIES (hdf_example ${LINK_LIBS}) -.......................................................................... - -************************************************************************ - -Need further assistance, send email to help@hdfgroup.org - -- cgit v0.12