From e88e34e5d811c0fff89ede5ae0cba58ea91910bd Mon Sep 17 00:00:00 2001 From: James Laird Date: Fri, 3 Mar 2006 16:52:34 -0500 Subject: [svn-r12002] Purpose: Moving gif2h5 from tools/ to hl/tools Description: Missed cvs adding hl/tools/Makefiles --- hl/tools/Makefile.am | 26 ++ hl/tools/Makefile.in | 853 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 879 insertions(+) create mode 100644 hl/tools/Makefile.am create mode 100644 hl/tools/Makefile.in diff --git a/hl/tools/Makefile.am b/hl/tools/Makefile.am new file mode 100644 index 0000000..45b6fa0 --- /dev/null +++ b/hl/tools/Makefile.am @@ -0,0 +1,26 @@ +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +## +## Makefile.am +## Run automake to generate a Makefile.in from this file. +## +# +# Tools HDF5 Makefile(.in) +# + +include $(top_srcdir)/config/commence.am + +# All subdirectories +SUBDIRS=gif2h5 + +include $(top_srcdir)/config/conclude.am diff --git a/hl/tools/Makefile.in b/hl/tools/Makefile.in new file mode 100644 index 0000000..a1a43bf --- /dev/null +++ b/hl/tools/Makefile.in @@ -0,0 +1,853 @@ +# Makefile.in generated by automake 1.9.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +# +# Tools HDF5 Makefile(.in) +# +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../.. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/commence.am \ + $(top_srcdir)/config/conclude.am +subdir = hl/tools +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +# Set the paths for AFS installs of autotools for Linux machines +# Ideally, these tools should never be needed during the build. +ACLOCAL = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/aclocal -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AM_MAKEFLAGS = @AM_MAKEFLAGS@ +AR = @AR@ +AUTOCONF = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoconf +AUTOHEADER = /afs/ncsa/projects/hdf/packages/autoconf_2.59/Linux_2.4/bin/autoheader +AUTOMAKE = /afs/ncsa/projects/hdf/packages/automake_1.9.5/Linux_2.4/bin/automake +AWK = @AWK@ +BUILD_ALL_CONDITIONAL_FALSE = @BUILD_ALL_CONDITIONAL_FALSE@ +BUILD_ALL_CONDITIONAL_TRUE = @BUILD_ALL_CONDITIONAL_TRUE@ +BUILD_CXX_CONDITIONAL_FALSE = @BUILD_CXX_CONDITIONAL_FALSE@ +BUILD_CXX_CONDITIONAL_TRUE = @BUILD_CXX_CONDITIONAL_TRUE@ +BUILD_FORTRAN_CONDITIONAL_FALSE = @BUILD_FORTRAN_CONDITIONAL_FALSE@ +BUILD_FORTRAN_CONDITIONAL_TRUE = @BUILD_FORTRAN_CONDITIONAL_TRUE@ +BUILD_HDF5_HL_CONDITIONAL_FALSE = @BUILD_HDF5_HL_CONDITIONAL_FALSE@ +BUILD_HDF5_HL_CONDITIONAL_TRUE = @BUILD_HDF5_HL_CONDITIONAL_TRUE@ +BUILD_PABLO_CONDITIONAL_FALSE = @BUILD_PABLO_CONDITIONAL_FALSE@ +BUILD_PABLO_CONDITIONAL_TRUE = @BUILD_PABLO_CONDITIONAL_TRUE@ +BUILD_PARALLEL_CONDITIONAL_FALSE = @BUILD_PARALLEL_CONDITIONAL_FALSE@ +BUILD_PARALLEL_CONDITIONAL_TRUE = @BUILD_PARALLEL_CONDITIONAL_TRUE@ +BUILD_SHARED_ONLY_CONDITIONAL_FALSE = @BUILD_SHARED_ONLY_CONDITIONAL_FALSE@ +BUILD_SHARED_ONLY_CONDITIONAL_TRUE = @BUILD_SHARED_ONLY_CONDITIONAL_TRUE@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_VERSION = @CC_VERSION@ + +# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5, +# but which shouldn't be exported to h5cc for building other programs. +CFLAGS = @CFLAGS@ @H5_CFLAGS@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ @H5_CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ @H5_CXXFLAGS@ +CXX_SHARED_CONDITIONAL_FALSE = @CXX_SHARED_CONDITIONAL_FALSE@ +CXX_SHARED_CONDITIONAL_TRUE = @CXX_SHARED_CONDITIONAL_TRUE@ +CYGPATH_W = @CYGPATH_W@ +DEBUG_PKG = @DEBUG_PKG@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ +F9XMODFLAG = @F9XMODFLAG@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FCFLAGS = @FCFLAGS@ +FCLIBS = @FCLIBS@ +FFLAGS = @FFLAGS@ @H5_FFLAGS@ +FILTERS = @FILTERS@ +FORTRAN_SHARED_CONDITIONAL_FALSE = @FORTRAN_SHARED_CONDITIONAL_FALSE@ +FORTRAN_SHARED_CONDITIONAL_TRUE = @FORTRAN_SHARED_CONDITIONAL_TRUE@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +H5_CFLAGS = @H5_CFLAGS@ +H5_CPPFLAGS = @H5_CPPFLAGS@ +H5_CXXFLAGS = @H5_CXXFLAGS@ +H5_FFLAGS = @H5_FFLAGS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MPE = @MPE@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PARALLEL = @PARALLEL@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SET_MAKE = @SET_MAKE@ + +# Hardcode SHELL to be /bin/sh. Most machines have this shell, and +# on at least one machine configure fails to detect its existence (janus). +# Also, when HDF5 is configured on one machine but run on another, +# configure's automatic SHELL detection may not work on the build machine. +SHELL = /bin/sh +SIZE_T = @SIZE_T@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTPARALLEL = @TESTPARALLEL@ +TR = @TR@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +ac_ct_FC = @ac_ct_FC@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp +TIME = time + +# Some machines need a command to run executables; this is that command +# so that our tests will run. +# We use RUNTESTS instead of RUNSERIAL directly because it may be that +# some tests need to be run with a different command. Older versions +# of the makefiles used the command +# $(LIBTOOL) --mode=execute +# in some directories, for instance. +RUNTESTS = $(RUNSERIAL) + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la +docdir = $(exec_prefix)/doc +@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CC = $(bindir)/h5cc + +# Scripts used to build examples +# If only shared libraries have been installed, have h5cc build examples with +# shared libraries instead of static libraries +@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CC = $(bindir)/h5cc -shlib +@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CC_PP = $(bindir)/h5pcc +@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CC_PP = $(bindir)/h5pcc -shlib +@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5FC = $(bindir)/h5fc +@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5FC = $(bindir)/h5fc -shlib +@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5FC_PP = $(bindir)/h5pfc +@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5FC_PP = $(bindir)/h5pfc -shlib +@BUILD_SHARED_ONLY_CONDITIONAL_FALSE@H5CPP = $(bindir)/h5c++ +@BUILD_SHARED_ONLY_CONDITIONAL_TRUE@H5CPP = $(bindir)/h5c++ -shlib + +# The trace script; this is used on source files from the C library to +# insert tracing macros. +TRACE = perl $(top_srcdir)/bin/trace + +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +# *.clog are from the MPE option. +CHECK_CLEANFILES = *.chkexe *.chklog *.clog + +# All subdirectories +SUBDIRS = gif2h5 + +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) + +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) + +TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) +TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign hl/tools/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign hl/tools/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(mkdir_p) $(distdir)/../../config + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-recursive +all-am: Makefile all-local +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ + mostlyclean-local + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ + check-TESTS check-am clean clean-generic clean-libtool \ + clean-recursive ctags ctags-recursive distclean \ + distclean-generic distclean-libtool distclean-recursive \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-local mostlyclean-recursive \ + pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ + uninstall-info-am + + +# check-install is a synonym for installcheck. +# Add this build rule here (rather than in conclude.am, where build rules +# normally go) because it should be included in the top-level Makefile.am +# as well. +check-install: installcheck + +# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. +# This tells the Makefiles that these targets are not files to be built but +# commands that should be executed even if a file with the same name already +# exists. +.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ + build-tests check-clean check-install check-p check-s check-vfd \ + install-doc lib progs tests uninstall-doc _exec_check-s _test + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) + +# General rule for recursive building targets. +# BUILT_SOURCES contain targets that need to be built before anything else +# in the directory (e.g., for Fortran type detection) +lib progs tests check-s check-p :: $(BUILT_SOURCES) + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done + +# General rule for recursive cleaning targets. Like the rule above, +# but doesn't require building BUILT_SOURCES. +check-clean :: + @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; + @for d in X $(SUBDIRS); do \ + if test $$d != X && test $$d != .; then \ + (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ + fi; \ + done +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +# UPDATE: docs no longer reside in this build tree, so this target +# is depreciated. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# clean up files generated by tests so they can be re-run. +build-check-clean: + $(RM) $(CHECK_CLEANFILES) + +# run check-clean whenever mostlyclean is run +mostlyclean-local: build-check-clean + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: + @$(MAKE) build-check-s + @$(MAKE) build-check-p + +# Actual execution of check-s. +build-check-s: $(LIB) $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s + @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ + echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) + +# The dummy.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ + tname=$(@:.chkexe_=)$(EXEEXT);\ + log=$(@:.chkexe_=.chklog); \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ + echo "No need to test $${tname} again."; \ + else \ + echo "============================" > $${log}; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ + else \ + echo "Testing $${tname} $(TEST_FLAGS)"; \ + echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + fi; \ + echo "============================" >> $${log}; \ + srcdir="$(srcdir)" \ + $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $(@:.chkexe_=.chkexe) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + echo "" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)"; \ + cat $${log}; \ + fi; \ + echo "============================"; \ + fi + +# The dummysh.chkexe here prevents the target from being +# empty if there are no tests in the current directory. +# $${log} is the log file. +# $${tname} is the name of test. +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + cmd=$(@:.chkexe_=);\ + tname=`basename $$cmd`;\ + chkname=`basename $(@:.chkexe_=.chkexe)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ + echo "============================"; \ + if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ + echo "No need to test $${tname} again."; \ + else \ + echo "============================" > $${log}; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ + echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + else \ + echo "Testing $${tname} $(TEST_FLAGS)"; \ + echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ + fi; \ + echo "============================" >> $${log}; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch $${chkname} || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + (cat $${log} && false) || exit 1; \ + echo "" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ + echo "============================" >> $${log}; \ + echo "Finished testing $${tname} $(TEST_FLAGS)"; \ + cat $${log}; \ + fi; \ + echo "============================"; \ + fi + +# Actual execution of check-p. +build-check-p: $(LIB) $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ + RUNTESTS="$(RUNPARALLEL)" || exit 1; \ + fi; \ + done + @for test in $(TEST_SCRIPT_PARA) dummy; do \ + if test $$test != dummy; then \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ + fi; \ + done + @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ + echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ + fi; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -- cgit v0.12