From cdc93ea7faa30084c6399b1a7cc5347e5654f860 Mon Sep 17 00:00:00 2001 From: vchoi Date: Tue, 21 Dec 2021 12:25:32 -0600 Subject: Address issue #1 and issue #3 of the group test failures. See Kent's documentation "Designed to Fail Tests and Issues". (A) Fix for issue #1: HDassert the < and = cases between old and new entry length. John will take care of the > case. (B) Fix for issue #3: set the cache copy of page_size again if different from f->shared->fs_page_size. --- src/H5AC.c | 31 +++++++++++++ src/H5ACprivate.h | 1 + src/H5Fvfd_swmr.c | 25 +++++++++- test/testvfdswmr.sh.in | 122 ++++++++++++++++++++++++++++++++++++++++++++++++- 4 files changed, 177 insertions(+), 2 deletions(-) diff --git a/src/H5AC.c b/src/H5AC.c index c913805..7e1f19b 100644 --- a/src/H5AC.c +++ b/src/H5AC.c @@ -2777,3 +2777,34 @@ H5AC_get_mdc_image_info(const H5AC_t *cache_ptr, haddr_t *image_addr, hsize_t *i done: FUNC_LEAVE_NOAPI(ret_value) } /* H5AC_get_mdc_image_info() */ + +/*------------------------------------------------------------------------- + * Function: H5AC_set_vfd_swmr_reader + * + * Purpose: Wrapper function for H5C_set_vfd_swmr_reader(). + * + * Return: SUCCEED on success, and FAIL on failure. + * + * Programmer: Vailin Choi; Dec 2021 + * + *------------------------------------------------------------------------- + */ +herr_t +H5AC_set_vfd_swmr_reader(H5AC_t *cache_ptr, hbool_t vfd_swmr_reader, hsize_t page_size) +{ + herr_t ret_value = SUCCEED; /* Return value */ + + FUNC_ENTER_NOAPI(FAIL) + + /* Sanity checks */ + HDassert(cache_ptr); + + if(cache_ptr->page_size != page_size) { + + if (H5C_set_vfd_swmr_reader((H5C_t *)cache_ptr, vfd_swmr_reader, page_size) < 0) + HGOTO_ERROR(H5E_CACHE, H5E_CANTSET, FAIL, "can't set page_size for VFD SWMR reader") + } + +done: + FUNC_LEAVE_NOAPI(ret_value) +} /* H5AC_set_vfd_swmr_reader() */ diff --git a/src/H5ACprivate.h b/src/H5ACprivate.h index f7bed0c..ff632d0 100644 --- a/src/H5ACprivate.h +++ b/src/H5ACprivate.h @@ -433,6 +433,7 @@ H5_DLL herr_t H5AC_unsettle_ring(H5F_t *f, H5AC_ring_t ring); H5_DLL herr_t H5AC_expunge_tag_type_metadata(H5F_t *f, haddr_t tag, int type_id, unsigned flags, hbool_t type_match); H5_DLL herr_t H5AC_get_tag(const void *thing, /*OUT*/ haddr_t *tag); +H5_DLL herr_t H5AC_set_vfd_swmr_reader(H5AC_t *cache_ptr, hbool_t vfd_swmr_reader, hsize_t page_size); /* Virtual entry routines */ H5_DLL H5AC_proxy_entry_t *H5AC_proxy_entry_create(void); diff --git a/src/H5Fvfd_swmr.c b/src/H5Fvfd_swmr.c index 43567ac..1a8f127 100644 --- a/src/H5Fvfd_swmr.c +++ b/src/H5Fvfd_swmr.c @@ -169,7 +169,7 @@ H5FL_DEFINE(eot_queue_entry_t); * Return: Success: SUCCEED * Failure: FAIL * - * Programmer: Vailin Choi -- 11/??/18 + * Programmer: Vailin Choi -- 10/??/18 * * Changes: None. * @@ -252,6 +252,21 @@ H5F_vfd_swmr_init(H5F_t *f, hbool_t file_create) HDassert(!shared->vfd_swmr_config.writer); + HDassert(shared->fs_page_size > 0); + /* This is a bug uncovered by issue #3 of the group test failures. + * See Kent's documentation "Designed to Fail Tests and Issues". + * The file opening process in H5F__new() initializes the cache copy of + * page_size via H5AC_create(). However, later on H5F__super_read() + * may change page size due to non-default setting of + * 'free-space manager info' in superblock extension. + * Fix: set the cache copy of page_size again if different from + * f->shared->fs_page_size. + */ + if(shared->cache) { + if (H5AC_set_vfd_swmr_reader(shared->cache, TRUE, shared->fs_page_size) < 0) + HGOTO_ERROR(H5E_CACHE, H5E_CANTSET, FAIL, "can't set page size in cache for VFD SWMR reader"); + } + shared->vfd_swmr_writer = FALSE; shared->max_jump_ticks = 0; @@ -1258,6 +1273,14 @@ H5F_vfd_swmr_reader_end_of_tick(H5F_t *f, hbool_t entering_api) #if 0 /*Kent*/ HDassert(oent->length == nent->length); #endif + /* This is a bug uncovered by issue #1 of the + * group test failures. See Kent's documentation + * "Designed to Fail Tests and Issues". + * nent->length can be <, =, > to oent->length. + * Fix: HDassert the 1st two cases: < and =. + * John will address the > case. + */ + HDassert(nent->length <= oent->length); /* the page has been altered -- evict it and * any contained metadata cache entries. diff --git a/test/testvfdswmr.sh.in b/test/testvfdswmr.sh.in index d52527b..955fbb6 100644 --- a/test/testvfdswmr.sh.in +++ b/test/testvfdswmr.sh.in @@ -1,4 +1,4 @@ -#!/usr/bin/env bash +#!/us/bin/env bash # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. @@ -75,6 +75,13 @@ DSETCHKS_FIFO_WRITER_TO_READER=fifo_dsetchks_writer_to_reader DSETCHKS_FIFO_READER_TO_WRITER=fifo_dsetchks_reader_to_writer ############################################################################### +## For gfail{1,2,3,4} test: definitions for fifo files to coordinate test runs +############################################################################### +# +GFAIL_FIFO_WRITER_TO_READER=fifo_group_writer_to_reader +GFAIL_FIFO_READER_TO_WRITER=fifo_group_reader_to_writer + +############################################################################### ## short hands and function definitions ############################################################################### # @@ -147,6 +154,7 @@ all_tests="${all_tests} groups groups_attrs groups_ops few_big many_small attrds # For exhaustive run, add: os_groups_attrs, os_groups_ops, os_groups_seg, dsetops, dsetchks,independ_wr if [[ "$HDF5TestExpress" -eq 0 ]] ; then # exhaustive run all_tests="${all_tests} os_groups_attrs os_groups_ops os_groups_seg dsetops dsetchks independ_wr" + all_tests="${all_tests} gfail_entry_length gfail_page_size" fi tests=${all_tests} @@ -1388,6 +1396,118 @@ fi ############################################################################### +# +# "gfail_entry_length" test +# +# Only for exhaustive run +# +# Verify that the assertion failure for old and new entry length is fixed. +# (See issue #1 in Kent's documentation "Designed to Fail Tests and Issues". +# +############################################################################### +# +# +if [ ${do_gfail_entry_length:-no} = yes ]; then + # + # Clean up any existing fifo files from previous runs + if [ -e ./$GFAIL_FIFO_WRITER_TO_READER ]; then # If writer fifo file is found + rm -f ./$GFAIL_FIFO_WRITER_TO_READER + fi + if [ -e ./$GFAIL_FIFO_READER_TO_WRITER ]; then # If reader fifo file is found + rm -f ./$GFAIL_FIFO_READER_TO_WRITER + fi + # + echo launch vfd_swmr_gfail_writer -q -m 10 -n 340000 + catch_out_err_and_rc vfd_swmr_gfail_entry_length_writer \ + ../vfd_swmr_gfail_writer -q -m 10 -n 340000 & + pid_writer=$! + + echo launch vfd_swmr_gfail_reader -m 10 -n 340000 + catch_out_err_and_rc vfd_swmr_gfail_entry_length_reader \ + ../vfd_swmr_gfail_reader -m 10 -n 340000 & + pid_reader=$! + + # Wait for the reader to finish before signaling the + # writer to quit: the writer holds the file open so that the + # reader will find the shadow file when it opens + # the .h5 file. + wait $pid_reader + wait $pid_writer + + # Collect exit code of the reader + if [ $(cat vfd_swmr_gfail_entry_length_reader.rc) -ne 0 ]; then + echo reader had error + nerrors=$((nerrors + 1)) + fi + + # Collect exit code of the writer + if [ $(cat vfd_swmr_gfail_entry_length_writer.rc) -ne 0 ]; then + echo writer had error + nerrors=$((nerrors + 1)) + fi + + # Clean up output files + rm -f vfd_swmr_gfail_entry_length_writer.{out,rc} + rm -f vfd_swmr_gfail_entry_length_reader.*.{out,rc} +fi + +############################################################################### +# +# "gfail_page_size" test +# +# Only for exhaustive run +# +# Verify that the assertion failure is fixed when non-default page size is set. +# (See issue #3 in Kent's documentation "Designed to Fail Tests and Issues". +# +############################################################################### +# +# +if [ ${do_gfail_page_size:-no} = yes ]; then + # + # Clean up any existing fifo files from previous runs + if [ -e ./$GFAIL_FIFO_WRITER_TO_READER ]; then # If writer fifo file is found + rm -f ./$GFAIL_FIFO_WRITER_TO_READER + fi + if [ -e ./$GFAIL_FIFO_READER_TO_WRITER ]; then # If reader fifo file is found + rm -f ./$GFAIL_FIFO_READER_TO_WRITER + fi + # + echo launch vfd_swmr_gfail_writer -q -m 10 -B 8192 -s 8192 -n 320000 + catch_out_err_and_rc vfd_swmr_gfail_page_size_writer \ + ../vfd_swmr_gfail_writer -q -m 10 -B 8192 -s 8192 -n 320000 & + pid_writer=$! + + echo launch vfd_swmr_gfail_reader -m 10 -B 8192 -s 8192 -n 320000 + catch_out_err_and_rc vfd_swmr_gfail_page_size_reader \ + ../vfd_swmr_gfail_reader -m 10 -B 8192 -s 8192 -n 320000 & + pid_reader=$! + + # Wait for the reader to finish before signaling the + # writer to quit: the writer holds the file open so that the + # reader will find the shadow file when it opens + # the .h5 file. + wait $pid_reader + wait $pid_writer + + # Collect exit code of the reader + if [ $(cat vfd_swmr_gfail_page_size_reader.rc) -ne 0 ]; then + echo reader had error + nerrors=$((nerrors + 1)) + fi + + # Collect exit code of the writer + if [ $(cat vfd_swmr_gfail_page_size_writer.rc) -ne 0 ]; then + echo writer had error + nerrors=$((nerrors + 1)) + fi + + # Clean up output files + rm -f vfd_swmr_gfail_page_size_writer.{out,rc} + rm -f vfd_swmr_gfail_page_size_reader.*.{out,rc} +fi + +############################################################################### ## Report and exit ############################################################################### cd .. -- cgit v0.12