From 9b2aafa18b550a34b39acd78d32e04af49c3cbbb Mon Sep 17 00:00:00 2001 From: James Laird Date: Wed, 14 Jul 2004 15:18:28 -0500 Subject: [svn-r8878] Purpose: Description: Missed adding a test file in previous commit. Solution: Platforms tested: Misc. update: --- test/reserved.c | 399 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) create mode 100755 test/reserved.c diff --git a/test/reserved.c b/test/reserved.c new file mode 100755 index 0000000..99cc53d --- /dev/null +++ b/test/reserved.c @@ -0,0 +1,399 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#include "h5test.h" + +/*------------------------------------------------------------------------- + * Function: rsrv_heap + * + * Purpose: Ensure that heaps reserve file address space. + * This function does this by creating datasets up to and past + * the limit of the file, then ensuring that an error (not an + * assert) was generated and that the file is readable. + * + * Return: Success: 0 + * + * Failure: 1 + * + * Programmer: James Laird + * Nat Furrer + * Friday, May 28, 2004 + * + * Modifications: + * + *------------------------------------------------------------------------- + */ +herr_t rsrv_heap() +{ + hid_t file_id, dataset_id, dataspace_id; + hid_t pfc_id; + hsize_t dims[1] = {1}; + herr_t ret_value = 0; + char dset_name[10]; + int i; + + TESTING("Reserving file space for heap"); + + /* Create a new file. */ + pfc_id = H5Pcreate(H5P_FILE_CREATE); + H5Pset_userblock(pfc_id, (int)0); + H5Pset_sym_k(pfc_id, (int)1, (int)1); + H5Pset_istore_k(pfc_id, (int)1); + /* Set file address sizes to be very small. */ + H5Pset_sizes(pfc_id, (size_t)2,(size_t)2); + + file_id = H5Fcreate("rsrv_heap", H5F_ACC_TRUNC, pfc_id, H5P_DEFAULT); + + /* Write datasets until the file is full, at which point HDF5 + * should throw an error. + */ + for (i = 0; i < 200; i++) + { + H5E_BEGIN_TRY { + dataspace_id = H5Screate_simple(1, dims, dims); + } H5E_END_TRY + + sprintf(dset_name, "Dset %d", i); + + H5E_BEGIN_TRY { + dataset_id = H5Dcreate(file_id, dset_name, H5T_NATIVE_INT, dataspace_id, H5P_DEFAULT); + } H5E_END_TRY + + if(dataset_id < 0) + break; + + H5E_BEGIN_TRY { + H5Dwrite(dataset_id, H5T_NATIVE_INT, dataspace_id, dataspace_id, H5P_DEFAULT, &i); + } H5E_END_TRY + + H5Dclose(dataset_id); + H5Sclose(dataspace_id); + } + + /* Close the file, property lists, and library */ + H5Fclose(file_id); + H5Pclose (pfc_id); + H5close(); + + /* The loop should have broken before completing--the file should not have had + * enough address space to hold 200 datasets (or this test needs to be updated!). + */ + if(i == 200) + { + ret_value = -1; + H5_FAILED(); + } + + /* Re-open the library and try to read a dataset from the file we created */ + H5open(); + + sprintf(dset_name, "Dset %d", i - 2); + + file_id = H5Fopen("rsrv_heap", H5F_ACC_RDONLY, H5P_DEFAULT); + + dataset_id = H5Dopen(file_id, dset_name); + + /* If we can read a dataset from the file, the file has been flushed to disk + * (if the heap or object headers weren't flushed, the file would be empty). + */ + if(dataset_id == H5I_BADID) + { + ret_value = -1; + H5_FAILED(); + } + + H5Dclose(dataset_id); + H5Fclose(file_id); + remove("rsrv_heap"); + + if(ret_value == 0) + { + PASSED(); + } + + return ret_value; +} + +/*------------------------------------------------------------------------- + * Function: rsrv_ohdr + * + * Purpose: Ensure that object headers reserve file address space. + * This function does this by creating attributes of a dataset + * past the limit of the file, then ensuring that an error (not + * an assert) was generated and that the file is readable. + * + * Return: Success: 0 + * + * Failure: 1 + * + * Programmer: James Laird + * Nat Furrer + * Friday, May 28, 2004 + * + * Modifications: + * + *------------------------------------------------------------------------- + */ +herr_t rsrv_ohdr() +{ + hid_t file_id, dataset_id, dataspace_id; + hid_t pfc_id, aid, attr_id; + hsize_t dims[2]; + herr_t status, ret_value = 0; + int attrval[4][6]; + char *basenm = "attr"; + char attrname[20], nm_suf[10]; + int i; + + TESTING("Reserving file space for object headers"); + + /* Create a new file using default properties. */ + pfc_id = H5Pcreate(H5P_FILE_CREATE); + H5Pset_userblock(pfc_id, (int)0); + H5Pset_sym_k(pfc_id, (int)1, (int)1); + H5Pset_istore_k(pfc_id, (int)1); + H5Pset_sizes(pfc_id, (size_t)2,(size_t)2); + + file_id = H5Fcreate("rsrv_ohdr", H5F_ACC_TRUNC, pfc_id, H5P_DEFAULT); + + /* Create the data space for the dataset. */ + dims[0] = 4; + dims[1] = 6; + dataspace_id = H5Screate_simple(2, dims, NULL); + + /* Create the dataset. */ + dataset_id = H5Dcreate(file_id, "/dset", H5T_STD_I32BE, dataspace_id, H5P_DEFAULT); + + for(i=0; i<6; i++) + { + attrval[0][i] = 0; + attrval[1][i] = 1; + attrval[2][i] = 2; + attrval[3][i] = 3; + } + + for (i = 0; i< 2000; i++) + { + strcpy(attrname, basenm); + sprintf(nm_suf, "%d", i); + strcat(attrname, nm_suf); + H5E_BEGIN_TRY{ + aid = H5Screate_simple(2, dims, NULL); + attr_id = H5Acreate (dataset_id, attrname, H5T_STD_I32BE, aid, H5P_DEFAULT); + status = H5Awrite(attr_id, H5T_NATIVE_INT, attrval); + status = H5Aclose(attr_id); + }H5E_END_TRY + + if(status < 0) + break; + } + + /* End access to the dataset and dataspace and release resources. */ + H5Dclose(dataset_id); + H5Pclose (pfc_id); + H5Sclose(dataspace_id); + + /* Close the file and the library. */ + H5Fclose(file_id); + H5close(); + + /* The loop should have broken before completing--the file should not have had + * enough address space to hold 2000 attributes (or this test needs to be updated!). + */ + if(i == 2000) + { + ret_value = -1; + H5_FAILED(); + } + + /* Re-open the library and try to read a dataset from the file we created */ + H5open(); + + file_id = H5Fopen("rsrv_ohdr", H5F_ACC_RDONLY, H5P_DEFAULT); + + dataset_id = H5Dopen(file_id, "/dset"); + + /* If we can read the dataset from the file, the file has been flushed to disk + * (if the heap or object headers weren't flushed, the file would be empty). + */ + if(dataset_id == H5I_BADID) + { + H5_FAILED(); + ret_value = -1; + } + + if(ret_value == 0) + PASSED(); + + H5Dclose(dataset_id); + H5Fclose(file_id); + + remove("rsrv_ohdr"); + + return ret_value; +} + +/*------------------------------------------------------------------------- + * Function: rsrv_vlen + * + * Purpose: Ensure that variable length datatypes properly ensure that + * enough file address space exists before writing. + * This function does this by creating a dataset containing + * variable length data past the limit of the file, then + * ensuring that an error (not an assert) was generated and + * that the file is readable. + * + * Return: Success: 0 + * + * Failure: 1 + * + * Programmer: James Laird + * Nat Furrer + * Thursday, July 1, 2004 + * + * Modifications: + * + *------------------------------------------------------------------------- + */ +herr_t rsrv_vlen() +{ + hid_t file_id, dataset_id, dataspace_id, type_id; + hid_t pfc_id, mem_space_id; + hsize_t dims[1], start[1], count[1]; + herr_t status, ret_value = 0; + int i; + int write_buf[20]; + hvl_t vlen_data; + + TESTING("Reserved space with variable length data"); + + /* Create a new file using default properties. */ + pfc_id = H5Pcreate(H5P_FILE_CREATE); + H5Pset_userblock(pfc_id, (int)0); + H5Pset_sym_k(pfc_id, (int)1, (int)1); + H5Pset_istore_k(pfc_id, (int)1); + H5Pset_sizes(pfc_id, (size_t)2,(size_t)2); + + file_id = H5Fcreate("rsrv_vlen", H5F_ACC_TRUNC, pfc_id, H5P_DEFAULT); + + /* Create the data space for the dataset. */ + dims[0] = 2000; + dataspace_id = H5Screate_simple(1, dims, NULL); + + /* Create a variable length type */ + type_id = H5Tvlen_create(H5T_NATIVE_INT); + + /* Create the dataset. */ + dataset_id = H5Dcreate(file_id, "/dset", type_id, dataspace_id, H5P_DEFAULT); + + /* Create some data to write */ + for (i = 0; i < 20; i++) + write_buf[i] = i+1; + vlen_data.p = write_buf; + + /* Create a memory dataspace for writing */ + dims[0] = 1; + mem_space_id = H5Screate_simple(1, dims, NULL); + + /* Create a selection to write to */ + start[0] = 0; + count[0] = 1; + H5Sselect_hyperslab(dataspace_id, H5S_SELECT_SET, start, NULL, count, NULL); + + for (i = 0; i< 2000; i++) + { + vlen_data.len = (i%20) + 1; + + dims[0] = i; + H5Soffset_simple(dataspace_id, dims); + + H5E_BEGIN_TRY + status = H5Dwrite(dataset_id, type_id, mem_space_id, dataspace_id, H5P_DEFAULT, &vlen_data); + H5E_END_TRY + + if(status < 0) + break; + } + + /* End access to the dataset and dataspace and release resources. */ + H5Dclose(dataset_id); + H5Pclose (pfc_id); + H5Sclose(dataspace_id); + H5Tclose(type_id); + H5Sclose(mem_space_id); + + /* Close the file and the library. */ + H5Fclose(file_id); + H5close(); + + /* The loop should have broken before completing--the file should not have had + * enough address space to hold 2000 attributes (or this test needs to be updated!). + */ + if(i == 2000) + { + ret_value = -1; + H5_FAILED(); + } + + /* Re-open the library and try to read a dataset from the file we created */ + H5open(); + + file_id = H5Fopen("rsrv_vlen", H5F_ACC_RDONLY, H5P_DEFAULT); + + dataset_id = H5Dopen(file_id, "/dset"); + + /* If we can read the dataset from the file, the file has been flushed to disk + * (if the heap or object headers weren't flushed, the file would be empty). + */ + if(dataset_id == H5I_BADID) + { + H5_FAILED(); + ret_value = -1; + } + + if(ret_value == 0) + PASSED(); + + H5Dclose(dataset_id); + H5Fclose(file_id); + + remove("rsrv_vlen"); + + return ret_value; +} + +/*------------------------------------------------------------------------- + * Function: main + * + * Purpose: + * + * Return: Success: + * + * Failure: + * + * Programmer: Nat Furrer and James Laird + * Thursday, July 1, 2004 + * + * Modifications: + * + *------------------------------------------------------------------------- + */ +int +main(void) +{ + rsrv_ohdr(); + rsrv_heap(); + rsrv_vlen(); +} + -- cgit v0.12