From 3374ffecf828a4e7a4e7566c3bd7315121c656d1 Mon Sep 17 00:00:00 2001 From: Raymond Lu Date: Thu, 28 Mar 2013 15:14:11 -0500 Subject: [svn-r23482] I changed the plugin library to be built as shared library only when configure enables shared. libtool will install the shared plugin library. I put a remove command in test/Makefile.am to delete the unnecessary plugin library. Tested on jam, koala, and emu. --- configure | 2872 +++++++++++++++++++++++++++--------------------------- test/Makefile.am | 8 +- test/Makefile.in | 154 ++- 3 files changed, 1551 insertions(+), 1483 deletions(-) diff --git a/configure b/configure index 4afa0a9..f5bf889 100755 --- a/configure +++ b/configure @@ -638,6 +638,8 @@ ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBOBJS +HAVE_SHARED_CONDITIONAL_FALSE +HAVE_SHARED_CONDITIONAL_TRUE SETX SEARCH BUILD_HDF5_HL_CONDITIONAL_FALSE @@ -689,8 +691,6 @@ USE_FILTER_SZIP USE_FILTER_DEFLATE AM_MAKEFLAGS LT_STATIC_EXEC -HAVE_SHARED_CONDITIONAL_FALSE -HAVE_SHARED_CONDITIONAL_TRUE CPP OTOOL64 OTOOL @@ -22022,18 +22022,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ---------------------------------------------------------------------- -## Set a macro if shared library is enabled. -## - if test "X$enable_shared" = "Xyes"; then - HAVE_SHARED_CONDITIONAL_TRUE= - HAVE_SHARED_CONDITIONAL_FALSE='#' -else - HAVE_SHARED_CONDITIONAL_TRUE='#' - HAVE_SHARED_CONDITIONAL_FALSE= -fi - - -## ---------------------------------------------------------------------- ## Check if we should install only statically linked executables. ## This check needs to occur after libtool is initialized because ## we check a libtool cache value and may issue a warning based @@ -31237,227 +31225,18 @@ if test -n "$TESTPARALLEL"; then FORTRAN_PARALLEL_MAKE=fortran/$TESTPARALLEL/Makefile fi fi - -ac_config_files="$ac_config_files src/libhdf5.settings Makefile src/Makefile test/Makefile test/testcheck_version.sh test/testerror.sh test/H5srcdir_str.h test/testlibinfo.sh test/testlinks_env.sh test/test_plugin.sh testpar/Makefile testpar/testph5.sh perform/Makefile tools/Makefile tools/h5dump/Makefile tools/h5dump/testh5dump.sh tools/h5dump/testh5dumppbits.sh tools/h5dump/testh5dumpxml.sh tools/h5ls/testh5ls.sh tools/h5import/Makefile tools/h5import/h5importtestutil.sh tools/h5diff/Makefile tools/h5diff/testh5diff.sh tools/h5diff/testph5diff.sh tools/h5jam/Makefile tools/h5jam/testh5jam.sh tools/h5repack/Makefile tools/h5repack/h5repack.sh tools/h5ls/Makefile tools/h5copy/Makefile tools/h5copy/testh5copy.sh tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/misc/testh5mkgrp.sh tools/misc/testh5repart.sh tools/h5stat/testh5stat.sh tools/h5stat/Makefile examples/Makefile examples/run-c-ex.sh examples/testh5cc.sh c++/Makefile c++/src/Makefile c++/src/h5c++ c++/test/Makefile c++/test/H5srcdir_str.h c++/examples/Makefile c++/examples/run-c++-ex.sh c++/examples/testh5c++.sh fortran/Makefile fortran/src/h5fc fortran/src/Makefile fortran/test/Makefile fortran/testpar/Makefile fortran/examples/Makefile fortran/examples/run-fortran-ex.sh fortran/examples/testh5fc.sh hl/Makefile hl/src/Makefile hl/test/Makefile hl/test/H5srcdir_str.h hl/tools/Makefile hl/tools/gif2h5/Makefile hl/tools/gif2h5/h52giftest.sh hl/examples/Makefile hl/examples/run-hlc-ex.sh hl/c++/Makefile hl/c++/src/Makefile hl/c++/test/Makefile hl/c++/examples/Makefile hl/c++/examples/run-hlc++-ex.sh hl/fortran/Makefile hl/fortran/src/Makefile hl/fortran/test/Makefile hl/fortran/examples/Makefile hl/fortran/examples/run-hlfortran-ex.sh" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_HAVE_SIZEOF_TRUE}" && test -z "${FORTRAN_HAVE_SIZEOF_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_HAVE_SIZEOF\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_2003_CONDITIONAL_F_TRUE}" && test -z "${FORTRAN_2003_CONDITIONAL_F_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_2003_CONDITIONAL_F\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_DEFAULT_REALisDBLE_F_TRUE}" && test -z "${FORTRAN_DEFAULT_REALisDBLE_F_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_DEFAULT_REALisDBLE_F\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_SHARED_CONDITIONAL_TRUE}" && test -z "${FORTRAN_SHARED_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_SHARED_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${CXX_SHARED_CONDITIONAL_TRUE}" && test -z "${CXX_SHARED_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"CXX_SHARED_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_SHARED_CONDITIONAL_TRUE}" && test -z "${HAVE_SHARED_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"HAVE_SHARED_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -if test -z "${BUILD_SHARED_SZIP_CONDITIONAL_TRUE}" && test -z "${BUILD_SHARED_SZIP_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_SHARED_SZIP_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DIRECT_VFD_CONDITIONAL_TRUE}" && test -z "${DIRECT_VFD_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"DIRECT_VFD_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BUILD_ALL_CONDITIONAL_TRUE}" && test -z "${BUILD_ALL_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_ALL_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BUILD_CXX_CONDITIONAL_TRUE}" && test -z "${BUILD_CXX_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_CXX_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BUILD_PARALLEL_CONDITIONAL_TRUE}" && test -z "${BUILD_PARALLEL_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_PARALLEL_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BUILD_FORTRAN_CONDITIONAL_TRUE}" && test -z "${BUILD_FORTRAN_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_FORTRAN_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${BUILD_HDF5_HL_CONDITIONAL_TRUE}" && test -z "${BUILD_HDF5_HL_CONDITIONAL_FALSE}"; then - as_fn_error $? "conditional \"BUILD_HDF5_HL_CONDITIONAL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +: ${CONFIG_LT=./config.lt} +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 +$as_echo "$as_me: creating $CONFIG_LT" >&6;} as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +cat >"$CONFIG_LT" <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - +# Run this file to recreate a libtool stub with the current configuration. SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +cat >>"$CONFIG_LT" <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## @@ -31821,203 +31600,71 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## +## --------------------------------- ## +## Main body of "$CONFIG_LT" script. ## +## --------------------------------- ## _ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by HDF5 $as_me 1.9.149, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE +test $as_write_fail = 0 && chmod +x "$CONFIG_LT" -Configuration files: -$config_files +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 -Configuration headers: -$config_headers +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. -Configuration commands: -$config_commands +Usage: $0 [OPTIONS] -Report bugs to ." + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -HDF5 config.status 1.9.149 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" +Report bugs to ." -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." +lt_cl_version="\ +HDF5 config.lt 1.9.149 +configured by $0, generated by GNU Autoconf 2.69. -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: while test $# != 0 do case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; + -*) as_fn_error $? "unrecognized option: $1 +Try \`$0 --help' for more information." "$LINENO" 5 ;; + *) as_fn_error $? "unrecognized argument: $1 +Try \`$0 --help' for more information." "$LINENO" 5 ;; esac shift done -ac_configure_extra_args= - -if $ac_cs_silent; then +if $lt_cl_silent; then exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" fi +_LTEOF -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +cat >>"$CONFIG_LT" <<_LTEOF # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -32481,802 +32128,13 @@ fi +_LTEOF -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "src/H5config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/H5config.h" ;; - "pubconf") CONFIG_COMMANDS="$CONFIG_COMMANDS pubconf" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "src/libhdf5.settings") CONFIG_FILES="$CONFIG_FILES src/libhdf5.settings" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; - "test/testcheck_version.sh") CONFIG_FILES="$CONFIG_FILES test/testcheck_version.sh" ;; - "test/testerror.sh") CONFIG_FILES="$CONFIG_FILES test/testerror.sh" ;; - "test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES test/H5srcdir_str.h" ;; - "test/testlibinfo.sh") CONFIG_FILES="$CONFIG_FILES test/testlibinfo.sh" ;; - "test/testlinks_env.sh") CONFIG_FILES="$CONFIG_FILES test/testlinks_env.sh" ;; - "test/test_plugin.sh") CONFIG_FILES="$CONFIG_FILES test/test_plugin.sh" ;; - "testpar/Makefile") CONFIG_FILES="$CONFIG_FILES testpar/Makefile" ;; - "testpar/testph5.sh") CONFIG_FILES="$CONFIG_FILES testpar/testph5.sh" ;; - "perform/Makefile") CONFIG_FILES="$CONFIG_FILES perform/Makefile" ;; - "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; - "tools/h5dump/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5dump/Makefile" ;; - "tools/h5dump/testh5dump.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dump.sh" ;; - "tools/h5dump/testh5dumppbits.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dumppbits.sh" ;; - "tools/h5dump/testh5dumpxml.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dumpxml.sh" ;; - "tools/h5ls/testh5ls.sh") CONFIG_FILES="$CONFIG_FILES tools/h5ls/testh5ls.sh" ;; - "tools/h5import/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5import/Makefile" ;; - "tools/h5import/h5importtestutil.sh") CONFIG_FILES="$CONFIG_FILES tools/h5import/h5importtestutil.sh" ;; - "tools/h5diff/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5diff/Makefile" ;; - "tools/h5diff/testh5diff.sh") CONFIG_FILES="$CONFIG_FILES tools/h5diff/testh5diff.sh" ;; - "tools/h5diff/testph5diff.sh") CONFIG_FILES="$CONFIG_FILES tools/h5diff/testph5diff.sh" ;; - "tools/h5jam/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5jam/Makefile" ;; - "tools/h5jam/testh5jam.sh") CONFIG_FILES="$CONFIG_FILES tools/h5jam/testh5jam.sh" ;; - "tools/h5repack/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5repack/Makefile" ;; - "tools/h5repack/h5repack.sh") CONFIG_FILES="$CONFIG_FILES tools/h5repack/h5repack.sh" ;; - "tools/h5ls/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5ls/Makefile" ;; - "tools/h5copy/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5copy/Makefile" ;; - "tools/h5copy/testh5copy.sh") CONFIG_FILES="$CONFIG_FILES tools/h5copy/testh5copy.sh" ;; - "tools/lib/Makefile") CONFIG_FILES="$CONFIG_FILES tools/lib/Makefile" ;; - "tools/misc/Makefile") CONFIG_FILES="$CONFIG_FILES tools/misc/Makefile" ;; - "tools/misc/h5cc") CONFIG_FILES="$CONFIG_FILES tools/misc/h5cc" ;; - "tools/misc/testh5mkgrp.sh") CONFIG_FILES="$CONFIG_FILES tools/misc/testh5mkgrp.sh" ;; - "tools/misc/testh5repart.sh") CONFIG_FILES="$CONFIG_FILES tools/misc/testh5repart.sh" ;; - "tools/h5stat/testh5stat.sh") CONFIG_FILES="$CONFIG_FILES tools/h5stat/testh5stat.sh" ;; - "tools/h5stat/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5stat/Makefile" ;; - "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; - "examples/run-c-ex.sh") CONFIG_FILES="$CONFIG_FILES examples/run-c-ex.sh" ;; - "examples/testh5cc.sh") CONFIG_FILES="$CONFIG_FILES examples/testh5cc.sh" ;; - "c++/Makefile") CONFIG_FILES="$CONFIG_FILES c++/Makefile" ;; - "c++/src/Makefile") CONFIG_FILES="$CONFIG_FILES c++/src/Makefile" ;; - "c++/src/h5c++") CONFIG_FILES="$CONFIG_FILES c++/src/h5c++" ;; - "c++/test/Makefile") CONFIG_FILES="$CONFIG_FILES c++/test/Makefile" ;; - "c++/test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES c++/test/H5srcdir_str.h" ;; - "c++/examples/Makefile") CONFIG_FILES="$CONFIG_FILES c++/examples/Makefile" ;; - "c++/examples/run-c++-ex.sh") CONFIG_FILES="$CONFIG_FILES c++/examples/run-c++-ex.sh" ;; - "c++/examples/testh5c++.sh") CONFIG_FILES="$CONFIG_FILES c++/examples/testh5c++.sh" ;; - "fortran/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/Makefile" ;; - "fortran/src/h5fc") CONFIG_FILES="$CONFIG_FILES fortran/src/h5fc" ;; - "fortran/src/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/src/Makefile" ;; - "fortran/test/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/test/Makefile" ;; - "fortran/testpar/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/testpar/Makefile" ;; - "fortran/examples/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/examples/Makefile" ;; - "fortran/examples/run-fortran-ex.sh") CONFIG_FILES="$CONFIG_FILES fortran/examples/run-fortran-ex.sh" ;; - "fortran/examples/testh5fc.sh") CONFIG_FILES="$CONFIG_FILES fortran/examples/testh5fc.sh" ;; - "hl/Makefile") CONFIG_FILES="$CONFIG_FILES hl/Makefile" ;; - "hl/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/src/Makefile" ;; - "hl/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/test/Makefile" ;; - "hl/test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES hl/test/H5srcdir_str.h" ;; - "hl/tools/Makefile") CONFIG_FILES="$CONFIG_FILES hl/tools/Makefile" ;; - "hl/tools/gif2h5/Makefile") CONFIG_FILES="$CONFIG_FILES hl/tools/gif2h5/Makefile" ;; - "hl/tools/gif2h5/h52giftest.sh") CONFIG_FILES="$CONFIG_FILES hl/tools/gif2h5/h52giftest.sh" ;; - "hl/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/examples/Makefile" ;; - "hl/examples/run-hlc-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/examples/run-hlc-ex.sh" ;; - "hl/c++/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/Makefile" ;; - "hl/c++/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/src/Makefile" ;; - "hl/c++/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/test/Makefile" ;; - "hl/c++/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/examples/Makefile" ;; - "hl/c++/examples/run-hlc++-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/c++/examples/run-hlc++-ex.sh" ;; - "hl/fortran/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/Makefile" ;; - "hl/fortran/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/src/Makefile" ;; - "hl/fortran/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/test/Makefile" ;; - "hl/fortran/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/examples/Makefile" ;; - "hl/fortran/examples/run-hlfortran-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/fortran/examples/run-hlfortran-ex.sh" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac +cat >>"$CONFIG_LT" <<\_LTEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ofile" >&5 +$as_echo "$as_me: creating $ofile" >&6;} - case $ac_file$ac_mode in - "pubconf":C) - echo "creating src/H5pubconf.h" - sed 's/#define /#define H5_/' pubconf - if test ! -f src/H5pubconf.h; then - /bin/mv -f pubconf src/H5pubconf.h - elif (diff pubconf src/H5pubconf.h >/dev/null); then - rm -f pubconf - echo "src/H5pubconf.h is unchanged" - else - /bin/mv -f pubconf src/H5pubconf.h - fi - echo "Post process src/libhdf5.settings" - sed '/^#/d' < src/libhdf5.settings > libhdf5.settings.TMP - cp libhdf5.settings.TMP src/libhdf5.settings - rm -f libhdf5.settings.TMP - ;; - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then @@ -34186,98 +33044,349 @@ inherit_rpath=$inherit_rpath_FC # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_FC -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols_FC +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols_FC + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_FC + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_FC + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_FC + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds_FC + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds_FC + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec_FC + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_FC + +# The directories searched by this compiler when creating a shared library. +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC + +# Dependencies to place before and after the objects being linked to +# create a shared library. +predep_objects=$lt_predep_objects_FC +postdep_objects=$lt_postdep_objects_FC +predeps=$lt_predeps_FC +postdeps=$lt_postdeps_FC + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_FC + +# ### END LIBTOOL TAG CONFIG: FC +_LT_EOF + + +as_fn_exit 0 +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec 5>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec 5>>config.log +$lt_cl_success || as_fn_exit 1 + +no_create=$saved_no_create + +## Then the stamp2 file for H5config.h +touch ./config/stamp2 + +## Finally the makefiles +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + +## Post processing to patch up some deficiencies in libtool +case $host_os in + linux* | freebsd* ) + ## If gcc is not used, need to set $wl to use "-Wl," + if $CC -v 2>&1 | grep '^gcc' > /dev/null ; then + : using gcc + else + echo 'fixing $wl in' $ofile +ed - $ofile < /dev/null +g/^wl=""/s//wl="-Wl,"/ +w +q +EOF + fi + ;; +esac + +## Are we compiling static libraries, shared libraries, or both? This +## is only used for the libhdf5.settings file. We can't just look at +## $enable_static and $enable_shared because if they're yes the ltconfig +## might have decided that one or the other is simply not possible. +## Therefore we have to ask the generated `libtool' shell script +## which 'features' it has enabled. +if (./libtool --features | grep '^enable shared libraries' > /dev/null); then + enable_shared=yes +else + enable_shared=no +fi -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_FC +if (./libtool --features | grep '^enable static libraries' > /dev/null); then + enable_static=yes +else + enable_static=no +fi -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_FC +if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then + STATIC_SHARED="static, shared" +elif test "X$enable_static" = "Xyes"; then + STATIC_SHARED="static" +elif test "X$enable_shared" = "Xyes"; then + STATIC_SHARED="shared" +else + STATIC_SHARED="none" +fi -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_FC +## ---------------------------------------------------------------------- +## Set a macro if shared library is enabled. +## + if test "X$enable_shared" = "Xyes"; then + HAVE_SHARED_CONDITIONAL_TRUE= + HAVE_SHARED_CONDITIONAL_FALSE='#' +else + HAVE_SHARED_CONDITIONAL_TRUE='#' + HAVE_SHARED_CONDITIONAL_FALSE= +fi -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds_FC -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds_FC +ac_config_files="$ac_config_files src/libhdf5.settings Makefile src/Makefile test/Makefile test/testcheck_version.sh test/testerror.sh test/H5srcdir_str.h test/testlibinfo.sh test/testlinks_env.sh test/test_plugin.sh testpar/Makefile testpar/testph5.sh perform/Makefile tools/Makefile tools/h5dump/Makefile tools/h5dump/testh5dump.sh tools/h5dump/testh5dumppbits.sh tools/h5dump/testh5dumpxml.sh tools/h5ls/testh5ls.sh tools/h5import/Makefile tools/h5import/h5importtestutil.sh tools/h5diff/Makefile tools/h5diff/testh5diff.sh tools/h5diff/testph5diff.sh tools/h5jam/Makefile tools/h5jam/testh5jam.sh tools/h5repack/Makefile tools/h5repack/h5repack.sh tools/h5ls/Makefile tools/h5copy/Makefile tools/h5copy/testh5copy.sh tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/misc/testh5mkgrp.sh tools/misc/testh5repart.sh tools/h5stat/testh5stat.sh tools/h5stat/Makefile examples/Makefile examples/run-c-ex.sh examples/testh5cc.sh c++/Makefile c++/src/Makefile c++/src/h5c++ c++/test/Makefile c++/test/H5srcdir_str.h c++/examples/Makefile c++/examples/run-c++-ex.sh c++/examples/testh5c++.sh fortran/Makefile fortran/src/h5fc fortran/src/Makefile fortran/test/Makefile fortran/testpar/Makefile fortran/examples/Makefile fortran/examples/run-fortran-ex.sh fortran/examples/testh5fc.sh hl/Makefile hl/src/Makefile hl/test/Makefile hl/test/H5srcdir_str.h hl/tools/Makefile hl/tools/gif2h5/Makefile hl/tools/gif2h5/h52giftest.sh hl/examples/Makefile hl/examples/run-hlc-ex.sh hl/c++/Makefile hl/c++/src/Makefile hl/c++/test/Makefile hl/c++/examples/Makefile hl/c++/examples/run-hlc++-ex.sh hl/fortran/Makefile hl/fortran/src/Makefile hl/fortran/test/Makefile hl/fortran/examples/Makefile hl/fortran/examples/run-hlfortran-ex.sh" -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec_FC -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_FC +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. -# The directories searched by this compiler when creating a shared library. -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC +_ACEOF -# Dependencies to place before and after the objects being linked to -# create a shared library. -predep_objects=$lt_predep_objects_FC -postdep_objects=$lt_postdep_objects_FC -predeps=$lt_predeps_FC -postdeps=$lt_postdeps_FC +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_FC + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache -# ### END LIBTOOL TAG CONFIG: FC -_LT_EOF +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - ;; +DEFS=-DHAVE_CONFIG_H - esac -done # for ac_tag +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs +LTLIBOBJS=$ac_ltlibobjs -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${FORTRAN_HAVE_SIZEOF_TRUE}" && test -z "${FORTRAN_HAVE_SIZEOF_FALSE}"; then + as_fn_error $? "conditional \"FORTRAN_HAVE_SIZEOF\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${FORTRAN_2003_CONDITIONAL_F_TRUE}" && test -z "${FORTRAN_2003_CONDITIONAL_F_FALSE}"; then + as_fn_error $? "conditional \"FORTRAN_2003_CONDITIONAL_F\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${FORTRAN_DEFAULT_REALisDBLE_F_TRUE}" && test -z "${FORTRAN_DEFAULT_REALisDBLE_F_FALSE}"; then + as_fn_error $? "conditional \"FORTRAN_DEFAULT_REALisDBLE_F\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${FORTRAN_SHARED_CONDITIONAL_TRUE}" && test -z "${FORTRAN_SHARED_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"FORTRAN_SHARED_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${CXX_SHARED_CONDITIONAL_TRUE}" && test -z "${CXX_SHARED_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"CXX_SHARED_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 +if test -z "${BUILD_SHARED_SZIP_CONDITIONAL_TRUE}" && test -z "${BUILD_SHARED_SZIP_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_SHARED_SZIP_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +if test -z "${DIRECT_VFD_CONDITIONAL_TRUE}" && test -z "${DIRECT_VFD_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"DIRECT_VFD_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_ALL_CONDITIONAL_TRUE}" && test -z "${BUILD_ALL_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_ALL_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_CXX_CONDITIONAL_TRUE}" && test -z "${BUILD_CXX_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_CXX_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_PARALLEL_CONDITIONAL_TRUE}" && test -z "${BUILD_PARALLEL_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_PARALLEL_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_FORTRAN_CONDITIONAL_TRUE}" && test -z "${BUILD_FORTRAN_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_FORTRAN_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_HDF5_HL_CONDITIONAL_TRUE}" && test -z "${BUILD_HDF5_HL_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"BUILD_HDF5_HL_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_SHARED_CONDITIONAL_TRUE}" && test -z "${HAVE_SHARED_CONDITIONAL_FALSE}"; then + as_fn_error $? "conditional \"HAVE_SHARED_CONDITIONAL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -: ${CONFIG_LT=./config.lt} -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5 -$as_echo "$as_me: creating $CONFIG_LT" >&6;} +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 -cat >"$CONFIG_LT" <<_ASEOF || as_write_fail=1 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. -# Run this file to recreate a libtool stub with the current configuration. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF -cat >>"$CONFIG_LT" <<\_ASEOF || as_write_fail=1 +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## @@ -34641,71 +33750,203 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 -## --------------------------------- ## -## Main body of "$CONFIG_LT" script. ## -## --------------------------------- ## +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## _ASEOF -test $as_write_fail = 0 && chmod +x "$CONFIG_LT" +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by HDF5 $as_me 1.9.149, which was +generated by GNU Autoconf 2.69. Invocation command line was -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ -Usage: $0 [OPTIONS] +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files +_ACEOF -Report bugs to ." +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -lt_cl_version="\ -HDF5 config.lt 1.9.149 -configured by $0, generated by GNU Autoconf 2.69. +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac -Copyright (C) 2011 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +HDF5 config.status 1.9.149 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: while test $# != 0 do case $1 in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac - -*) as_fn_error $? "unrecognized option: $1 -Try \`$0 --help' for more information." "$LINENO" 5 ;; + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; - *) as_fn_error $? "unrecognized argument: $1 -Try \`$0 --help' for more information." "$LINENO" 5 ;; esac shift done -if $lt_cl_silent; then +ac_configure_extra_args= + +if $ac_cs_silent; then exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" fi -_LTEOF -cat >>"$CONFIG_LT" <<_LTEOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -35092,90 +34333,879 @@ compiler_lib_search_path_FC; do eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac -done +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec \ +reload_cmds_CXX \ +reload_cmds_FC \ +old_archive_cmds_CXX \ +old_archive_cmds_FC \ +old_archive_from_new_cmds_CXX \ +old_archive_from_new_cmds_FC \ +old_archive_from_expsyms_cmds_CXX \ +old_archive_from_expsyms_cmds_FC \ +archive_cmds_CXX \ +archive_cmds_FC \ +archive_expsym_cmds_CXX \ +archive_expsym_cmds_FC \ +module_cmds_CXX \ +module_cmds_FC \ +module_expsym_cmds_CXX \ +module_expsym_cmds_FC \ +export_symbols_cmds_CXX \ +export_symbols_cmds_FC \ +prelink_cmds_CXX \ +prelink_cmds_FC \ +postlink_cmds_CXX \ +postlink_cmds_FC; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + + +ac_aux_dir='$ac_aux_dir' + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "src/H5config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/H5config.h" ;; + "pubconf") CONFIG_COMMANDS="$CONFIG_COMMANDS pubconf" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "src/libhdf5.settings") CONFIG_FILES="$CONFIG_FILES src/libhdf5.settings" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; + "test/testcheck_version.sh") CONFIG_FILES="$CONFIG_FILES test/testcheck_version.sh" ;; + "test/testerror.sh") CONFIG_FILES="$CONFIG_FILES test/testerror.sh" ;; + "test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES test/H5srcdir_str.h" ;; + "test/testlibinfo.sh") CONFIG_FILES="$CONFIG_FILES test/testlibinfo.sh" ;; + "test/testlinks_env.sh") CONFIG_FILES="$CONFIG_FILES test/testlinks_env.sh" ;; + "test/test_plugin.sh") CONFIG_FILES="$CONFIG_FILES test/test_plugin.sh" ;; + "testpar/Makefile") CONFIG_FILES="$CONFIG_FILES testpar/Makefile" ;; + "testpar/testph5.sh") CONFIG_FILES="$CONFIG_FILES testpar/testph5.sh" ;; + "perform/Makefile") CONFIG_FILES="$CONFIG_FILES perform/Makefile" ;; + "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; + "tools/h5dump/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5dump/Makefile" ;; + "tools/h5dump/testh5dump.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dump.sh" ;; + "tools/h5dump/testh5dumppbits.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dumppbits.sh" ;; + "tools/h5dump/testh5dumpxml.sh") CONFIG_FILES="$CONFIG_FILES tools/h5dump/testh5dumpxml.sh" ;; + "tools/h5ls/testh5ls.sh") CONFIG_FILES="$CONFIG_FILES tools/h5ls/testh5ls.sh" ;; + "tools/h5import/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5import/Makefile" ;; + "tools/h5import/h5importtestutil.sh") CONFIG_FILES="$CONFIG_FILES tools/h5import/h5importtestutil.sh" ;; + "tools/h5diff/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5diff/Makefile" ;; + "tools/h5diff/testh5diff.sh") CONFIG_FILES="$CONFIG_FILES tools/h5diff/testh5diff.sh" ;; + "tools/h5diff/testph5diff.sh") CONFIG_FILES="$CONFIG_FILES tools/h5diff/testph5diff.sh" ;; + "tools/h5jam/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5jam/Makefile" ;; + "tools/h5jam/testh5jam.sh") CONFIG_FILES="$CONFIG_FILES tools/h5jam/testh5jam.sh" ;; + "tools/h5repack/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5repack/Makefile" ;; + "tools/h5repack/h5repack.sh") CONFIG_FILES="$CONFIG_FILES tools/h5repack/h5repack.sh" ;; + "tools/h5ls/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5ls/Makefile" ;; + "tools/h5copy/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5copy/Makefile" ;; + "tools/h5copy/testh5copy.sh") CONFIG_FILES="$CONFIG_FILES tools/h5copy/testh5copy.sh" ;; + "tools/lib/Makefile") CONFIG_FILES="$CONFIG_FILES tools/lib/Makefile" ;; + "tools/misc/Makefile") CONFIG_FILES="$CONFIG_FILES tools/misc/Makefile" ;; + "tools/misc/h5cc") CONFIG_FILES="$CONFIG_FILES tools/misc/h5cc" ;; + "tools/misc/testh5mkgrp.sh") CONFIG_FILES="$CONFIG_FILES tools/misc/testh5mkgrp.sh" ;; + "tools/misc/testh5repart.sh") CONFIG_FILES="$CONFIG_FILES tools/misc/testh5repart.sh" ;; + "tools/h5stat/testh5stat.sh") CONFIG_FILES="$CONFIG_FILES tools/h5stat/testh5stat.sh" ;; + "tools/h5stat/Makefile") CONFIG_FILES="$CONFIG_FILES tools/h5stat/Makefile" ;; + "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; + "examples/run-c-ex.sh") CONFIG_FILES="$CONFIG_FILES examples/run-c-ex.sh" ;; + "examples/testh5cc.sh") CONFIG_FILES="$CONFIG_FILES examples/testh5cc.sh" ;; + "c++/Makefile") CONFIG_FILES="$CONFIG_FILES c++/Makefile" ;; + "c++/src/Makefile") CONFIG_FILES="$CONFIG_FILES c++/src/Makefile" ;; + "c++/src/h5c++") CONFIG_FILES="$CONFIG_FILES c++/src/h5c++" ;; + "c++/test/Makefile") CONFIG_FILES="$CONFIG_FILES c++/test/Makefile" ;; + "c++/test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES c++/test/H5srcdir_str.h" ;; + "c++/examples/Makefile") CONFIG_FILES="$CONFIG_FILES c++/examples/Makefile" ;; + "c++/examples/run-c++-ex.sh") CONFIG_FILES="$CONFIG_FILES c++/examples/run-c++-ex.sh" ;; + "c++/examples/testh5c++.sh") CONFIG_FILES="$CONFIG_FILES c++/examples/testh5c++.sh" ;; + "fortran/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/Makefile" ;; + "fortran/src/h5fc") CONFIG_FILES="$CONFIG_FILES fortran/src/h5fc" ;; + "fortran/src/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/src/Makefile" ;; + "fortran/test/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/test/Makefile" ;; + "fortran/testpar/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/testpar/Makefile" ;; + "fortran/examples/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/examples/Makefile" ;; + "fortran/examples/run-fortran-ex.sh") CONFIG_FILES="$CONFIG_FILES fortran/examples/run-fortran-ex.sh" ;; + "fortran/examples/testh5fc.sh") CONFIG_FILES="$CONFIG_FILES fortran/examples/testh5fc.sh" ;; + "hl/Makefile") CONFIG_FILES="$CONFIG_FILES hl/Makefile" ;; + "hl/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/src/Makefile" ;; + "hl/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/test/Makefile" ;; + "hl/test/H5srcdir_str.h") CONFIG_FILES="$CONFIG_FILES hl/test/H5srcdir_str.h" ;; + "hl/tools/Makefile") CONFIG_FILES="$CONFIG_FILES hl/tools/Makefile" ;; + "hl/tools/gif2h5/Makefile") CONFIG_FILES="$CONFIG_FILES hl/tools/gif2h5/Makefile" ;; + "hl/tools/gif2h5/h52giftest.sh") CONFIG_FILES="$CONFIG_FILES hl/tools/gif2h5/h52giftest.sh" ;; + "hl/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/examples/Makefile" ;; + "hl/examples/run-hlc-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/examples/run-hlc-ex.sh" ;; + "hl/c++/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/Makefile" ;; + "hl/c++/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/src/Makefile" ;; + "hl/c++/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/test/Makefile" ;; + "hl/c++/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/c++/examples/Makefile" ;; + "hl/c++/examples/run-hlc++-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/c++/examples/run-hlc++-ex.sh" ;; + "hl/fortran/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/Makefile" ;; + "hl/fortran/src/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/src/Makefile" ;; + "hl/fortran/test/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/test/Makefile" ;; + "hl/fortran/examples/Makefile") CONFIG_FILES="$CONFIG_FILES hl/fortran/examples/Makefile" ;; + "hl/fortran/examples/run-hlfortran-ex.sh") CONFIG_FILES="$CONFIG_FILES hl/fortran/examples/run-hlfortran-ex.sh" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec \ -reload_cmds_CXX \ -reload_cmds_FC \ -old_archive_cmds_CXX \ -old_archive_cmds_FC \ -old_archive_from_new_cmds_CXX \ -old_archive_from_new_cmds_FC \ -old_archive_from_expsyms_cmds_CXX \ -old_archive_from_expsyms_cmds_FC \ -archive_cmds_CXX \ -archive_cmds_FC \ -archive_expsym_cmds_CXX \ -archive_expsym_cmds_FC \ -module_cmds_CXX \ -module_cmds_FC \ -module_expsym_cmds_CXX \ -module_expsym_cmds_FC \ -export_symbols_cmds_CXX \ -export_symbols_cmds_FC \ -prelink_cmds_CXX \ -prelink_cmds_FC \ -postlink_cmds_CXX \ -postlink_cmds_FC; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac -done + ;; + esac -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' + case $ac_mode in + :F) + # + # CONFIG_FILE + # + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 -ac_aux_dir='$ac_aux_dir' +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; -_LTEOF + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac -cat >>"$CONFIG_LT" <<\_LTEOF -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $ofile" >&5 -$as_echo "$as_me: creating $ofile" >&6;} + case $ac_file$ac_mode in + "pubconf":C) + echo "creating src/H5pubconf.h" + sed 's/#define /#define H5_/' pubconf + if test ! -f src/H5pubconf.h; then + /bin/mv -f pubconf src/H5pubconf.h + elif (diff pubconf src/H5pubconf.h >/dev/null); then + rm -f pubconf + echo "src/H5pubconf.h is unchanged" + else + /bin/mv -f pubconf src/H5pubconf.h + fi + echo "Post process src/libhdf5.settings" + sed '/^#/d' < src/libhdf5.settings > libhdf5.settings.TMP + cp libhdf5.settings.TMP src/libhdf5.settings + rm -f libhdf5.settings.TMP + ;; + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. @@ -36127,75 +36157,45 @@ compiler_lib_search_path=$lt_compiler_lib_search_path_FC # ### END LIBTOOL TAG CONFIG: FC _LT_EOF + ;; -as_fn_exit 0 -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec 5>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec 5>>config.log -$lt_cl_success || as_fn_exit 1 + esac +done # for ac_tag -no_create=$saved_no_create -## Then the stamp2 file for H5config.h -touch ./config/stamp2 +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save -## Finally the makefiles -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 -## Post processing to patch up some deficiencies in libtool -case $host_os in - linux* | freebsd* ) - ## If gcc is not used, need to set $wl to use "-Wl," - if $CC -v 2>&1 | grep '^gcc' > /dev/null ; then - : using gcc - else - echo 'fixing $wl in' $ofile -ed - $ofile < /dev/null -g/^wl=""/s//wl="-Wl,"/ -w -q -EOF - fi - ;; -esac -## Are we compiling static libraries, shared libraries, or both? This -## is only used for the libhdf5.settings file. We can't just look at -## $enable_static and $enable_shared because if they're yes the ltconfig -## might have decided that one or the other is simply not possible. -## Therefore we have to ask the generated `libtool' shell script -## which 'features' it has enabled. -if (./libtool --features | grep '^enable shared libraries' > /dev/null); then - enable_shared=yes -else - enable_shared=no +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 fi - -if (./libtool --features | grep '^enable static libraries' > /dev/null); then - enable_static=yes -else - enable_static=no +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi -if test "X$enable_static" = "Xyes" && test "X$enable_shared" = "Xyes"; then - STATIC_SHARED="static, shared" -elif test "X$enable_static" = "Xyes"; then - STATIC_SHARED="static" -elif test "X$enable_shared" = "Xyes"; then - STATIC_SHARED="shared" -else - STATIC_SHARED="none" -fi chmod 755 tools/misc/h5cc diff --git a/test/Makefile.am b/test/Makefile.am index 62b309d..61f1ed5 100644 --- a/test/Makefile.am +++ b/test/Makefile.am @@ -78,12 +78,16 @@ endif if HAVE_SHARED_CONDITIONAL # The libh5test library provides common support code for the tests. - noinst_LTLIBRARIES=libh5test.la libdynlib1.la + noinst_LTLIBRARIES=libh5test.la # The libdynlib1 library for testing plugin module plugin.c. # Build it as shared library if configure is enabled for shared library. + lib_LTLIBRARIES=libdynlib1.la libdynlib1_la_SOURCES=dynlib1.c - libdynlib1_la_LDFLAGS=-rpath /tmp + +install-data-local: + $(RM) $(DESTDIR)$(libdir)/*dynlib1* + else # The libh5test library provides common support code for the tests. noinst_LTLIBRARIES=libh5test.la diff --git a/test/Makefile.in b/test/Makefile.in index 2864a56..958ec33 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -75,20 +75,14 @@ DIST_COMMON = $(srcdir)/H5srcdir_str.h.in $(srcdir)/Makefile.am \ $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/mkinstalldirs \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am COPYING -@HAVE_SHARED_CONDITIONAL_FALSE@check_PROGRAMS = $(am__EXEEXT_1) \ -@HAVE_SHARED_CONDITIONAL_FALSE@ error_test$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_FALSE@ err_compat$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_FALSE@ tcheck_version$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_FALSE@ testmeta$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_FALSE@ links_env$(EXEEXT) -@HAVE_SHARED_CONDITIONAL_TRUE@check_PROGRAMS = $(am__EXEEXT_1) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ error_test$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ err_compat$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ tcheck_version$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ testmeta$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ links_env$(EXEEXT) \ -@HAVE_SHARED_CONDITIONAL_TRUE@ plugin$(EXEEXT) -@BUILD_ALL_CONDITIONAL_TRUE@noinst_PROGRAMS = $(am__EXEEXT_2) +@HAVE_SHARED_CONDITIONAL_TRUE@am__append_1 = test_plugin.sh +@HAVE_SHARED_CONDITIONAL_TRUE@am__append_2 = plugin$(EXEEXT) +check_PROGRAMS = $(am__EXEEXT_1) error_test$(EXEEXT) \ + err_compat$(EXEEXT) tcheck_version$(EXEEXT) testmeta$(EXEEXT) \ + links_env$(EXEEXT) $(am__EXEEXT_2) +@HAVE_SHARED_CONDITIONAL_TRUE@am__append_3 = plugin +@BUILD_ALL_CONDITIONAL_TRUE@noinst_PROGRAMS = $(am__EXEEXT_3) +@DIRECT_VFD_CONDITIONAL_TRUE@am__append_4 = direct TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = test ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -100,7 +94,35 @@ CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = testcheck_version.sh testerror.sh H5srcdir_str.h \ testlibinfo.sh testlinks_env.sh test_plugin.sh CONFIG_CLEAN_VPATH_FILES = -LTLIBRARIES = $(noinst_LTLIBRARIES) +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(libdir)" +LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) libdynlib1_la_LIBADD = am__libdynlib1_la_SOURCES_DIST = dynlib1.c @HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib1_la_OBJECTS = dynlib1.lo @@ -109,10 +131,8 @@ AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = -libdynlib1_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(libdynlib1_la_LDFLAGS) $(LDFLAGS) -o $@ -@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib1_la_rpath = +@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlib1_la_rpath = -rpath \ +@HAVE_SHARED_CONDITIONAL_TRUE@ $(libdir) libh5test_la_LIBADD = am_libh5test_la_OBJECTS = h5test.lo testframe.lo cache_common.lo libh5test_la_OBJECTS = $(am_libh5test_la_OBJECTS) @@ -134,7 +154,8 @@ am__EXEEXT_1 = testhdf5$(EXEEXT) lheap$(EXEEXT) ohdr$(EXEEXT) \ dtransform$(EXEEXT) reserved$(EXEEXT) cross_read$(EXEEXT) \ freespace$(EXEEXT) mf$(EXEEXT) farray$(EXEEXT) earray$(EXEEXT) \ btree2$(EXEEXT) fheap$(EXEEXT) file_image$(EXEEXT) -am__EXEEXT_2 = gen_bad_ohdr$(EXEEXT) gen_bogus$(EXEEXT) \ +@HAVE_SHARED_CONDITIONAL_TRUE@am__EXEEXT_2 = plugin$(EXEEXT) +am__EXEEXT_3 = gen_bad_ohdr$(EXEEXT) gen_bogus$(EXEEXT) \ gen_cross$(EXEEXT) gen_deflate$(EXEEXT) gen_filters$(EXEEXT) \ gen_new_array$(EXEEXT) gen_new_fill$(EXEEXT) \ gen_new_group$(EXEEXT) gen_new_mtime$(EXEEXT) \ @@ -845,12 +866,12 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog accum.h5 cmpd_dset.h5 \ new_multi_file_v16-s.h5 split_get_file_image_test-m.h5 \ split_get_file_image_test-r.h5 file_image_core_test.h5.copy INCLUDES = -I$(top_srcdir)/src -I$(top_builddir)/src -@HAVE_SHARED_CONDITIONAL_FALSE@TEST_SCRIPT = testerror.sh testlibinfo.sh testcheck_version.sh testlinks_env.sh # Test script for error_test and err_compat -@HAVE_SHARED_CONDITIONAL_TRUE@TEST_SCRIPT = testerror.sh testlibinfo.sh testcheck_version.sh testlinks_env.sh test_plugin.sh -@HAVE_SHARED_CONDITIONAL_FALSE@SCRIPT_DEPEND = error_test$(EXEEXT) err_compat$(EXEEXT) links_env$(EXEEXT) -@HAVE_SHARED_CONDITIONAL_TRUE@SCRIPT_DEPEND = error_test$(EXEEXT) err_compat$(EXEEXT) links_env$(EXEEXT) plugin$(EXEEXT) +TEST_SCRIPT = testerror.sh testlibinfo.sh testcheck_version.sh \ + testlinks_env.sh $(am__append_1) +SCRIPT_DEPEND = error_test$(EXEEXT) err_compat$(EXEEXT) \ + links_env$(EXEEXT) $(am__append_2) check_SCRIPTS = $(TEST_SCRIPT) # These are our main targets. They should be listed in the order to be @@ -882,9 +903,9 @@ BUILD_ALL_PROGS = gen_bad_ohdr gen_bogus gen_cross gen_deflate gen_filters gen_n gen_sizes_lheap gen_file_image gen_plist @HAVE_SHARED_CONDITIONAL_FALSE@noinst_LTLIBRARIES = libh5test.la -@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libh5test.la libdynlib1.la +@HAVE_SHARED_CONDITIONAL_TRUE@noinst_LTLIBRARIES = libh5test.la +@HAVE_SHARED_CONDITIONAL_TRUE@lib_LTLIBRARIES = libdynlib1.la @HAVE_SHARED_CONDITIONAL_TRUE@libdynlib1_la_SOURCES = dynlib1.c -@HAVE_SHARED_CONDITIONAL_TRUE@libdynlib1_la_LDFLAGS = -rpath /tmp libh5test_la_SOURCES = h5test.c testframe.c cache_common.c # Use libhd5test.la to compile all of the tests @@ -894,8 +915,7 @@ LDADD = libh5test.la $(LIBHDF5) ttsafe_SOURCES = ttsafe.c ttsafe_dcreate.c ttsafe_error.c ttsafe_cancel.c \ ttsafe_acreate.c -@DIRECT_VFD_CONDITIONAL_FALSE@VFD_LIST = sec2 stdio core split multi family -@DIRECT_VFD_CONDITIONAL_TRUE@VFD_LIST = sec2 stdio core split multi family direct +VFD_LIST = sec2 stdio core split multi family $(am__append_4) # Sources for testhdf5 executable testhdf5_SOURCES = testhdf5.c tarray.c tattr.c tchecksum.c tconfig.c tfile.c \ @@ -973,6 +993,40 @@ testlinks_env.sh: $(top_builddir)/config.status $(srcdir)/testlinks_env.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ test_plugin.sh: $(top_builddir)/config.status $(srcdir)/test_plugin.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ + if test -f $$p; then \ + list2="$$list2 $$p"; \ + else :; fi; \ + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @@ -985,7 +1039,7 @@ clean-noinstLTLIBRARIES: rm -f $${locs}; \ } libdynlib1.la: $(libdynlib1_la_OBJECTS) $(libdynlib1_la_DEPENDENCIES) $(EXTRA_libdynlib1_la_DEPENDENCIES) - $(AM_V_CCLD)$(libdynlib1_la_LINK) $(am_libdynlib1_la_rpath) $(libdynlib1_la_OBJECTS) $(libdynlib1_la_LIBADD) $(LIBS) + $(AM_V_CCLD)$(LINK) $(am_libdynlib1_la_rpath) $(libdynlib1_la_OBJECTS) $(libdynlib1_la_LIBADD) $(LIBS) libh5test.la: $(libh5test_la_OBJECTS) $(libh5test_la_DEPENDENCIES) $(EXTRA_libh5test_la_DEPENDENCIES) $(AM_V_CCLD)$(LINK) $(am_libh5test_la_rpath) $(libh5test_la_OBJECTS) $(libh5test_la_LIBADD) $(LIBS) @@ -1475,6 +1529,9 @@ check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local installdirs: + for dir in "$(DESTDIR)$(libdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done install: install-am install-exec: install-exec-am install-data: install-data-am @@ -1506,10 +1563,12 @@ distclean-generic: maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." +@HAVE_SHARED_CONDITIONAL_FALSE@install-data-local: clean: clean-am -clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am +clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ + mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) @@ -1529,13 +1588,13 @@ info: info-am info-am: -install-data-am: +install-data-am: install-data-local install-dvi: install-dvi-am install-dvi-am: -install-exec-am: +install-exec-am: install-libLTLIBRARIES install-html: install-html-am @@ -1575,24 +1634,25 @@ ps: ps-am ps-am: -uninstall-am: +uninstall-am: uninstall-libLTLIBRARIES .MAKE: check-am install-am install-strip .PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \ - clean clean-checkPROGRAMS clean-generic clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS cscopelist ctags \ - distclean distclean-compile distclean-generic \ + clean clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ + cscopelist ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ - pdf-am ps ps-am tags uninstall uninstall-am + install-data-am install-data-local install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-libLTLIBRARIES \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \ + uninstall uninstall-am uninstall-libLTLIBRARIES # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. @@ -1610,6 +1670,10 @@ help: @HAVE_SHARED_CONDITIONAL_TRUE@ # The libdynlib1 library for testing plugin module plugin.c. @HAVE_SHARED_CONDITIONAL_TRUE@ # Build it as shared library if configure is enabled for shared library. + +@HAVE_SHARED_CONDITIONAL_TRUE@install-data-local: +@HAVE_SHARED_CONDITIONAL_TRUE@ $(RM) $(DESTDIR)$(libdir)/*dynlib1* + @HAVE_SHARED_CONDITIONAL_FALSE@ # The libh5test library provides common support code for the tests. # Additional target for running timing test -- cgit v0.12