From 57d670faa68f1ce52d82652be5f88ee02f862545 Mon Sep 17 00:00:00 2001 From: Dana Robinson Date: Tue, 22 Sep 2015 09:14:17 -0500 Subject: [svn-r27853] Merged r27488-27500 from the trunk. Fortran 2003 changes Tested on: jam serial (w/ gcc/gfortran 4.9.3) jam parallel (fortran tests, parallel tests have known failure) --- MANIFEST | 173 +- Makefile.in | 27 +- c++/Makefile.in | 27 +- c++/examples/Makefile.in | 27 +- c++/src/Makefile.in | 29 +- c++/test/Makefile.in | 29 +- config/cmake/HDF5UseFortran.cmake | 62 +- configure | 31683 ++++++++++--------- configure.ac | 295 +- examples/Makefile.in | 27 +- fortran/Makefile.in | 27 +- fortran/doc/DevelGuide/masterindex.html | 589 - fortran/doc/DevelGuide/robo_functions.html | 39 - fortran/doc/DevelGuide/robo_modules.html | 117 - fortran/doc/DevelGuide/robo_programs.html | 39 - fortran/doc/DevelGuide/robo_sourcefiles.html | 309 - fortran/doc/DevelGuide/robo_subroutines.html | 421 - fortran/doc/DevelGuide/robodoc.css | 302 - fortran/doc/DevelGuide/src/H5Af_c.html | 41 - fortran/doc/DevelGuide/src/H5Aff_F03_f90.html | 130 - fortran/doc/DevelGuide/src/H5Aff_F90_f90.html | 56 - fortran/doc/DevelGuide/src/H5Aff_f90.html | 1102 - fortran/doc/DevelGuide/src/H5Df_c.html | 41 - fortran/doc/DevelGuide/src/H5Dff_F03_f90.html | 138 - fortran/doc/DevelGuide/src/H5Dff_F90_f90.html | 116 - fortran/doc/DevelGuide/src/H5Dff_f90.html | 506 - fortran/doc/DevelGuide/src/H5Ef_c.html | 41 - fortran/doc/DevelGuide/src/H5Eff_f90.html | 197 - fortran/doc/DevelGuide/src/H5FDmpiof_c.html | 41 - fortran/doc/DevelGuide/src/H5FDmpioff_f90.html | 253 - fortran/doc/DevelGuide/src/H5Ff_c.html | 41 - fortran/doc/DevelGuide/src/H5Fff_f90.html | 653 - fortran/doc/DevelGuide/src/H5Gf_c.html | 41 - fortran/doc/DevelGuide/src/H5Gff_f90.html | 840 - fortran/doc/DevelGuide/src/H5If_c.html | 41 - fortran/doc/DevelGuide/src/H5Iff_f90.html | 304 - fortran/doc/DevelGuide/src/H5Lf_c.html | 41 - fortran/doc/DevelGuide/src/H5Lff_F03_f90.html | 181 - fortran/doc/DevelGuide/src/H5Lff_F90_f90.html | 50 - fortran/doc/DevelGuide/src/H5Lff_f90.html | 637 - fortran/doc/DevelGuide/src/H5Of_c.html | 41 - fortran/doc/DevelGuide/src/H5Off_f90.html | 198 - fortran/doc/DevelGuide/src/H5Pf_c.html | 41 - fortran/doc/DevelGuide/src/H5Pff_F03_f90.html | 832 - fortran/doc/DevelGuide/src/H5Pff_F90_f90.html | 715 - fortran/doc/DevelGuide/src/H5Pff_f90.html | 4752 --- fortran/doc/DevelGuide/src/H5Rf_c.html | 41 - fortran/doc/DevelGuide/src/H5Rff_F03_f90.html | 492 - fortran/doc/DevelGuide/src/H5Rff_F90_f90.html | 305 - fortran/doc/DevelGuide/src/H5Rff_f90.html | 148 - fortran/doc/DevelGuide/src/H5Sf_c.html | 41 - fortran/doc/DevelGuide/src/H5Sff_f90.html | 1165 - fortran/doc/DevelGuide/src/H5Tf_c.html | 41 - fortran/doc/DevelGuide/src/H5Tff_f90.html | 2378 -- fortran/doc/DevelGuide/src/H5Zf_c.html | 41 - fortran/doc/DevelGuide/src/H5Zff_f90.html | 173 - .../src/H5_DBLE_InterfaceExclude_f90.html | 53 - .../src/H5_DBLE_InterfaceInclude_f90.html | 54 - fortran/doc/DevelGuide/src/H5_f_c.html | 41 - fortran/doc/DevelGuide/src/H5_ff_F03_f90.html | 83 - fortran/doc/DevelGuide/src/H5_ff_F90_f90.html | 48 - fortran/doc/DevelGuide/src/H5_ff_f90.html | 269 - fortran/doc/DevelGuide/src/H5f90global_f90.html | 61 - fortran/doc/DevelGuide/src/H5f90kit_c.html | 44 - fortran/doc/DevelGuide/src/H5match_types_c.html | 49 - .../doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html | 61 - fortran/doc/DevelGuide/src/H5test_kind_f90.html | 62 - fortran/doc/DevelGuide/src/HDF5_f90.html | 47 - fortran/doc/DevelGuide/src/HDF5mpio_f90.html | 45 - fortran/doc/DevelGuide/test/fflush1_f90.html | 47 - fortran/doc/DevelGuide/test/fflush2_f90.html | 47 - .../DevelGuide/test/fortranlib_test_1_8_f90.html | 44 - .../DevelGuide/test/fortranlib_test_F03_f90.html | 45 - .../doc/DevelGuide/test/fortranlib_test_f90.html | 44 - fortran/doc/DevelGuide/test/tF2003_f90.html | 53 - fortran/doc/DevelGuide/test/tH5A_1_8_f90.html | 51 - fortran/doc/DevelGuide/test/tH5A_f90.html | 47 - fortran/doc/DevelGuide/test/tH5D_f90.html | 52 - fortran/doc/DevelGuide/test/tH5E_f90.html | 51 - fortran/doc/DevelGuide/test/tH5F_f90.html | 47 - fortran/doc/DevelGuide/test/tH5G_1_8_f90.html | 49 - fortran/doc/DevelGuide/test/tH5G_f90.html | 47 - fortran/doc/DevelGuide/test/tH5I_f90.html | 47 - fortran/doc/DevelGuide/test/tH5O_f90.html | 47 - fortran/doc/DevelGuide/test/tH5P_f90.html | 47 - fortran/doc/DevelGuide/test/tH5R_f90.html | 51 - fortran/doc/DevelGuide/test/tH5S_f90.html | 54 - fortran/doc/DevelGuide/test/tH5Sselect_f90.html | 56 - fortran/doc/DevelGuide/test/tH5T_f90.html | 47 - fortran/doc/DevelGuide/test/tH5VL_f90.html | 47 - fortran/doc/DevelGuide/test/tH5Z_f90.html | 47 - fortran/doc/DevelGuide/test/t_c.html | 44 - fortran/doc/DevelGuide/test/tf_f90.html | 48 - fortran/doc/DevelGuide/toc_index.html | 552 - fortran/examples/Makefile.am | 12 +- fortran/examples/Makefile.in | 51 +- fortran/examples/nested_derived_type.f90 | 12 +- fortran/examples/rwdset_fortran2003.f90 | 24 +- fortran/src/H5Af.c | 1478 +- fortran/src/H5Aff.F90 | 1873 ++ fortran/src/H5Aff.f90 | 1673 - fortran/src/H5Aff_F03.f90 | 1267 - fortran/src/H5Aff_F90.f90 | 1618 - fortran/src/H5Df.c | 1658 +- fortran/src/H5Dff.F90 | 1878 ++ fortran/src/H5Dff.f90 | 1035 - fortran/src/H5Dff_F03.f90 | 2389 -- fortran/src/H5Dff_F90.f90 | 3004 -- fortran/src/H5Ef.c | 65 +- fortran/src/H5Eff.F90 | 302 + fortran/src/H5Eff.f90 | 251 - fortran/src/H5Eff_F03.f90 | 108 - fortran/src/H5Eff_F90.f90 | 89 - fortran/src/H5FDmpiof.c | 258 - fortran/src/H5FDmpioff.f90 | 212 - fortran/src/H5Ff.c | 238 +- fortran/src/H5Fff.F90 | 871 + fortran/src/H5Fff.f90 | 834 - fortran/src/H5Fff_F03.f90 | 99 - fortran/src/H5Fff_F90.f90 | 43 - fortran/src/H5Gf.c | 393 +- fortran/src/H5Gff.F90 | 1272 + fortran/src/H5Gff.f90 | 1331 - fortran/src/H5If.c | 104 +- fortran/src/H5Iff.F90 | 345 + fortran/src/H5Iff.f90 | 352 - fortran/src/H5Lf.c | 324 +- fortran/src/H5Lff.F90 | 1478 + fortran/src/H5Lff.f90 | 1300 - fortran/src/H5Lff_F03.f90 | 242 - fortran/src/H5Lff_F90.f90 | 39 - fortran/src/H5Of.c | 86 +- fortran/src/H5Off.F90 | 1149 + fortran/src/H5Off.f90 | 775 - fortran/src/H5Off_F03.f90 | 435 - fortran/src/H5Off_F90.f90 | 39 - fortran/src/H5Pf.c | 2655 +- fortran/src/H5Pff.F90 | 7327 +++++ fortran/src/H5Pff.f90 | 6400 ---- fortran/src/H5Pff_F03.f90 | 1267 - fortran/src/H5Pff_F90.f90 | 949 - fortran/src/H5Rf.c | 338 +- fortran/src/H5Rff.F90 | 792 + fortran/src/H5Rff.f90 | 128 - fortran/src/H5Rff_F03.f90 | 719 - fortran/src/H5Rff_F90.f90 | 514 - fortran/src/H5Sf.c | 554 +- fortran/src/H5Sff.F90 | 1754 + fortran/src/H5Sff.f90 | 1875 -- fortran/src/H5Tf.c | 681 +- fortran/src/H5Tff.F90 | 3082 ++ fortran/src/H5Tff.f90 | 3105 -- fortran/src/H5Tff_F03.f90 | 223 - fortran/src/H5Tff_F90.f90 | 95 - fortran/src/H5Zf.c | 44 +- fortran/src/H5Zff.F90 | 189 + fortran/src/H5Zff.f90 | 198 - fortran/src/H5_DBLE_InterfaceExclude.f90 | 39 - fortran/src/H5_DBLE_InterfaceInclude.f90 | 1859 -- fortran/src/H5_buildiface.F90 | 1024 + fortran/src/H5_f.c | 275 +- fortran/src/H5_ff.F90 | 451 + fortran/src/H5_ff.f90 | 409 - fortran/src/H5_ff_F03.f90 | 75 - fortran/src/H5_ff_F90.f90 | 34 - fortran/src/H5config_f.inc.cmake | 84 + fortran/src/H5config_f.inc.in | 59 + fortran/src/H5f90global.F90 | 1040 + fortran/src/H5f90global.f90 | 947 - fortran/src/H5f90kit.c | 32 +- fortran/src/H5f90proto.h | 1468 +- fortran/src/H5fort_type_defines.h.in | 16 + fortran/src/H5match_types.c | 577 +- fortran/src/H5test_kind.f90 | 269 - fortran/src/H5test_kind_SIZEOF.f90 | 228 - fortran/src/H5test_kind_STORAGE_SIZE.f90 | 230 - fortran/src/HDF5.F90 | 46 + fortran/src/HDF5.f90 | 56 - fortran/src/HDF5mpio.f90 | 55 - fortran/src/Makefile.am | 157 +- fortran/src/Makefile.in | 306 +- fortran/src/hdf5_fortrandll.def.in | 272 +- fortran/test/H5_test_buildiface.F90 | 306 + fortran/test/Makefile.am | 61 +- fortran/test/Makefile.in | 224 +- fortran/test/fflush2.f90 | 297 +- fortran/test/tH5A.f90 | 19 +- fortran/test/tH5A_1_8.f90 | 177 +- fortran/test/tH5D.f90 | 950 +- fortran/test/tH5E_F03.f90 | 19 +- fortran/test/tH5F_F03.f90 | 13 +- fortran/test/tH5G_1_8.f90 | 207 +- fortran/test/tH5I.f90 | 10 +- fortran/test/tH5L_F03.f90 | 27 +- fortran/test/tH5MISC_1_8.f90 | 53 +- fortran/test/tH5O.f90 | 56 +- fortran/test/tH5O_F03.f90 | 4 +- fortran/test/tH5P.f90 | 71 +- fortran/test/tH5P_F03.f90 | 65 +- fortran/test/tH5R.f90 | 37 +- fortran/test/tH5S.f90 | 6 +- fortran/test/tH5Sselect.f90 | 219 +- fortran/test/tH5T.f90 | 259 +- fortran/test/tH5T_F03.F90 | 3425 ++ fortran/test/tH5T_F03.f90 | 3453 -- fortran/test/tH5VL.f90 | 30 +- fortran/test/tHDF5.f90 | 1 + fortran/test/tf.F90 | 412 + fortran/test/tf.f90 | 393 - fortran/test/tf_F03.f90 | 128 - fortran/test/tf_F08.f90 | 128 - fortran/test/tf_F90.f90 | 33 - fortran/testpar/Makefile.in | 29 +- hl/Makefile.in | 27 +- hl/c++/Makefile.in | 27 +- hl/c++/examples/Makefile.in | 27 +- hl/c++/src/Makefile.in | 29 +- hl/c++/test/Makefile.in | 29 +- hl/examples/Makefile.in | 27 +- hl/fortran/Makefile.in | 27 +- hl/fortran/examples/Makefile.in | 27 +- hl/fortran/src/H5DSfc.c | 36 +- hl/fortran/src/H5DSff.F90 | 518 + hl/fortran/src/H5DSff.f90 | 545 - hl/fortran/src/H5HL_buildiface.F90 | 683 + hl/fortran/src/H5IMfc.c | 24 +- hl/fortran/src/H5IMff.F90 | 667 + hl/fortran/src/H5IMff.f90 | 783 - hl/fortran/src/H5LTf90proto.h | 1380 +- hl/fortran/src/H5LTfc.c | 1428 +- hl/fortran/src/H5LTff.F90 | 1912 ++ hl/fortran/src/H5LTff.f90 | 6490 ---- hl/fortran/src/H5TBfc.c | 307 +- hl/fortran/src/H5TBff.F90 | 848 + hl/fortran/src/H5TBff.f90 | 1900 -- hl/fortran/src/Makefile.am | 36 +- hl/fortran/src/Makefile.in | 148 +- hl/fortran/src/hdf5_hl_fortrandll.def.in | 88 + hl/fortran/test/Makefile.am | 8 +- hl/fortran/test/Makefile.in | 68 +- hl/fortran/test/tstds.F90 | 353 + hl/fortran/test/tstds.f90 | 353 - hl/fortran/test/tstimage.F90 | 339 + hl/fortran/test/tstimage.f90 | 339 - hl/fortran/test/tstlite.F90 | 1719 + hl/fortran/test/tstlite.f90 | 1628 - hl/fortran/test/tsttable.F90 | 534 + hl/fortran/test/tsttable.f90 | 466 - hl/src/Makefile.in | 29 +- hl/test/Makefile.in | 29 +- hl/tools/Makefile.in | 27 +- hl/tools/gif2h5/Makefile.in | 29 +- hl/tools/h5watch/Makefile.in | 29 +- m4/aclocal_fc.m4 | 345 +- src/H5config.h.in | 54 + src/Makefile.in | 28 +- src/libhdf5.settings.in | 1 - test/Makefile.in | 29 +- testpar/Makefile.in | 29 +- tools/Makefile.in | 27 +- tools/h5copy/Makefile.in | 29 +- tools/h5diff/Makefile.in | 29 +- tools/h5dump/Makefile.in | 29 +- tools/h5format_convert/Makefile.in | 29 +- tools/h5import/Makefile.in | 29 +- tools/h5jam/Makefile.in | 29 +- tools/h5ls/Makefile.in | 29 +- tools/h5repack/Makefile.in | 29 +- tools/h5stat/Makefile.in | 29 +- tools/lib/Makefile.in | 29 +- tools/misc/Makefile.in | 29 +- tools/perform/Makefile.in | 29 +- 272 files changed, 60346 insertions(+), 103238 deletions(-) delete mode 100644 fortran/doc/DevelGuide/masterindex.html delete mode 100644 fortran/doc/DevelGuide/robo_functions.html delete mode 100644 fortran/doc/DevelGuide/robo_modules.html delete mode 100644 fortran/doc/DevelGuide/robo_programs.html delete mode 100644 fortran/doc/DevelGuide/robo_sourcefiles.html delete mode 100644 fortran/doc/DevelGuide/robo_subroutines.html delete mode 100644 fortran/doc/DevelGuide/robodoc.css delete mode 100644 fortran/doc/DevelGuide/src/H5Af_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Aff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Aff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Aff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Df_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Dff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Dff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Dff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Ef_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Eff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5FDmpiof_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5FDmpioff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Ff_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Fff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Gf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Gff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5If_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Iff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Lf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Lff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Lff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Lff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Of_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Off_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Pf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Pff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Pff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Pff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Rf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Rff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Rff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Rff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Sf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Sff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Tf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Tff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5Zf_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5Zff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5_DBLE_InterfaceExclude_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5_DBLE_InterfaceInclude_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5_f_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5_ff_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5_ff_F90_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5_ff_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5f90global_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5f90kit_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5match_types_c.html delete mode 100644 fortran/doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html delete mode 100644 fortran/doc/DevelGuide/src/H5test_kind_f90.html delete mode 100644 fortran/doc/DevelGuide/src/HDF5_f90.html delete mode 100644 fortran/doc/DevelGuide/src/HDF5mpio_f90.html delete mode 100644 fortran/doc/DevelGuide/test/fflush1_f90.html delete mode 100644 fortran/doc/DevelGuide/test/fflush2_f90.html delete mode 100644 fortran/doc/DevelGuide/test/fortranlib_test_1_8_f90.html delete mode 100644 fortran/doc/DevelGuide/test/fortranlib_test_F03_f90.html delete mode 100644 fortran/doc/DevelGuide/test/fortranlib_test_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tF2003_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5A_1_8_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5A_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5D_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5E_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5F_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5G_1_8_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5G_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5I_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5O_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5P_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5R_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5S_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5Sselect_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5T_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5VL_f90.html delete mode 100644 fortran/doc/DevelGuide/test/tH5Z_f90.html delete mode 100644 fortran/doc/DevelGuide/test/t_c.html delete mode 100644 fortran/doc/DevelGuide/test/tf_f90.html delete mode 100644 fortran/doc/DevelGuide/toc_index.html create mode 100644 fortran/src/H5Aff.F90 delete mode 100644 fortran/src/H5Aff.f90 delete mode 100644 fortran/src/H5Aff_F03.f90 delete mode 100644 fortran/src/H5Aff_F90.f90 create mode 100644 fortran/src/H5Dff.F90 delete mode 100644 fortran/src/H5Dff.f90 delete mode 100644 fortran/src/H5Dff_F03.f90 delete mode 100644 fortran/src/H5Dff_F90.f90 create mode 100644 fortran/src/H5Eff.F90 delete mode 100644 fortran/src/H5Eff.f90 delete mode 100644 fortran/src/H5Eff_F03.f90 delete mode 100644 fortran/src/H5Eff_F90.f90 delete mode 100644 fortran/src/H5FDmpiof.c delete mode 100644 fortran/src/H5FDmpioff.f90 create mode 100644 fortran/src/H5Fff.F90 delete mode 100644 fortran/src/H5Fff.f90 delete mode 100644 fortran/src/H5Fff_F03.f90 delete mode 100644 fortran/src/H5Fff_F90.f90 create mode 100644 fortran/src/H5Gff.F90 delete mode 100644 fortran/src/H5Gff.f90 create mode 100644 fortran/src/H5Iff.F90 delete mode 100644 fortran/src/H5Iff.f90 create mode 100644 fortran/src/H5Lff.F90 delete mode 100644 fortran/src/H5Lff.f90 delete mode 100644 fortran/src/H5Lff_F03.f90 delete mode 100644 fortran/src/H5Lff_F90.f90 create mode 100644 fortran/src/H5Off.F90 delete mode 100644 fortran/src/H5Off.f90 delete mode 100644 fortran/src/H5Off_F03.f90 delete mode 100644 fortran/src/H5Off_F90.f90 create mode 100644 fortran/src/H5Pff.F90 delete mode 100644 fortran/src/H5Pff.f90 delete mode 100644 fortran/src/H5Pff_F03.f90 delete mode 100644 fortran/src/H5Pff_F90.f90 create mode 100644 fortran/src/H5Rff.F90 delete mode 100644 fortran/src/H5Rff.f90 delete mode 100644 fortran/src/H5Rff_F03.f90 delete mode 100644 fortran/src/H5Rff_F90.f90 create mode 100644 fortran/src/H5Sff.F90 delete mode 100644 fortran/src/H5Sff.f90 create mode 100644 fortran/src/H5Tff.F90 delete mode 100644 fortran/src/H5Tff.f90 delete mode 100644 fortran/src/H5Tff_F03.f90 delete mode 100644 fortran/src/H5Tff_F90.f90 create mode 100644 fortran/src/H5Zff.F90 delete mode 100644 fortran/src/H5Zff.f90 delete mode 100644 fortran/src/H5_DBLE_InterfaceExclude.f90 delete mode 100644 fortran/src/H5_DBLE_InterfaceInclude.f90 create mode 100644 fortran/src/H5_buildiface.F90 create mode 100644 fortran/src/H5_ff.F90 delete mode 100644 fortran/src/H5_ff.f90 delete mode 100644 fortran/src/H5_ff_F03.f90 delete mode 100644 fortran/src/H5_ff_F90.f90 create mode 100644 fortran/src/H5config_f.inc.cmake create mode 100644 fortran/src/H5config_f.inc.in create mode 100644 fortran/src/H5f90global.F90 delete mode 100644 fortran/src/H5f90global.f90 create mode 100644 fortran/src/H5fort_type_defines.h.in delete mode 100644 fortran/src/H5test_kind.f90 delete mode 100644 fortran/src/H5test_kind_SIZEOF.f90 delete mode 100644 fortran/src/H5test_kind_STORAGE_SIZE.f90 create mode 100644 fortran/src/HDF5.F90 delete mode 100644 fortran/src/HDF5.f90 delete mode 100644 fortran/src/HDF5mpio.f90 create mode 100644 fortran/test/H5_test_buildiface.F90 create mode 100644 fortran/test/tH5T_F03.F90 delete mode 100644 fortran/test/tH5T_F03.f90 create mode 100644 fortran/test/tf.F90 delete mode 100644 fortran/test/tf.f90 delete mode 100644 fortran/test/tf_F03.f90 delete mode 100644 fortran/test/tf_F08.f90 delete mode 100644 fortran/test/tf_F90.f90 create mode 100644 hl/fortran/src/H5DSff.F90 delete mode 100644 hl/fortran/src/H5DSff.f90 create mode 100644 hl/fortran/src/H5HL_buildiface.F90 create mode 100644 hl/fortran/src/H5IMff.F90 delete mode 100644 hl/fortran/src/H5IMff.f90 create mode 100644 hl/fortran/src/H5LTff.F90 delete mode 100644 hl/fortran/src/H5LTff.f90 create mode 100644 hl/fortran/src/H5TBff.F90 delete mode 100644 hl/fortran/src/H5TBff.f90 create mode 100644 hl/fortran/src/hdf5_hl_fortrandll.def.in create mode 100644 hl/fortran/test/tstds.F90 delete mode 100644 hl/fortran/test/tstds.f90 create mode 100644 hl/fortran/test/tstimage.F90 delete mode 100644 hl/fortran/test/tstimage.f90 create mode 100644 hl/fortran/test/tstlite.F90 delete mode 100644 hl/fortran/test/tstlite.f90 create mode 100644 hl/fortran/test/tsttable.F90 delete mode 100644 hl/fortran/test/tsttable.f90 diff --git a/MANIFEST b/MANIFEST index faf503f..36482e7 100644 --- a/MANIFEST +++ b/MANIFEST @@ -161,89 +161,6 @@ ./fortran/Makefile.in ./fortran/robodoc.rc -./fortran/doc/DevelGuide/toc_index.html -./fortran/doc/DevelGuide/masterindex.html -./fortran/doc/DevelGuide/robo_subroutines.html -./fortran/doc/DevelGuide/robo_sourcefiles.html -./fortran/doc/DevelGuide/robo_functions.html -./fortran/doc/DevelGuide/robo_modules.html -./fortran/doc/DevelGuide/robo_programs.html -./fortran/doc/DevelGuide/robodoc.css -./fortran/doc/DevelGuide/test/fortranlib_test_f90.html -./fortran/doc/DevelGuide/test/tH5A_f90.html -./fortran/doc/DevelGuide/test/tH5VL_f90.html -./fortran/doc/DevelGuide/test/tH5D_f90.html -./fortran/doc/DevelGuide/test/tH5E_f90.html -./fortran/doc/DevelGuide/test/tH5F_f90.html -./fortran/doc/DevelGuide/test/tH5G_f90.html -./fortran/doc/DevelGuide/test/fflush1_f90.html -./fortran/doc/DevelGuide/test/fortranlib_test_1_8_f90.html -./fortran/doc/DevelGuide/test/tH5A_1_8_f90.html -./fortran/doc/DevelGuide/test/tf_f90.html -./fortran/doc/DevelGuide/test/fflush2_f90.html -./fortran/doc/DevelGuide/test/fortranlib_test_F03_f90.html -./fortran/doc/DevelGuide/test/tH5I_f90.html -./fortran/doc/DevelGuide/test/tH5G_1_8_f90.html -./fortran/doc/DevelGuide/test/tF2003_f90.html -./fortran/doc/DevelGuide/test/tH5O_f90.html -./fortran/doc/DevelGuide/test/tH5P_f90.html -./fortran/doc/DevelGuide/test/tH5R_f90.html -./fortran/doc/DevelGuide/test/tH5S_f90.html -./fortran/doc/DevelGuide/test/tH5Sselect_f90.html -./fortran/doc/DevelGuide/test/tH5T_f90.html -./fortran/doc/DevelGuide/test/t_c.html -./fortran/doc/DevelGuide/test/tH5Z_f90.html -./fortran/doc/DevelGuide/src/H5Fff_f90.html -./fortran/doc/DevelGuide/src/H5Zf_c.html -./fortran/doc/DevelGuide/src/H5Pff_F90_f90.html -./fortran/doc/DevelGuide/src/H5Aff_F03_f90.html -./fortran/doc/DevelGuide/src/H5match_types_c.html -./fortran/doc/DevelGuide/src/H5Rff_F90_f90.html -./fortran/doc/DevelGuide/src/H5Lff_f90.html -./fortran/doc/DevelGuide/src/H5FDmpiof_c.html -./fortran/doc/DevelGuide/src/H5_f_c.html -./fortran/doc/DevelGuide/src/H5Pff_f90.html -./fortran/doc/DevelGuide/src/H5Rff_f90.html -./fortran/doc/DevelGuide/src/H5Tff_f90.html -./fortran/doc/DevelGuide/src/H5test_kind_f90.html -./fortran/doc/DevelGuide/src/H5Aff_F90_f90.html -./fortran/doc/DevelGuide/src/H5Zff_f90.html -./fortran/doc/DevelGuide/src/HDF5_f90.html -./fortran/doc/DevelGuide/src/H5_DBLE_InterfaceInclude_f90.html -./fortran/doc/DevelGuide/src/H5f90kit_c.html -./fortran/doc/DevelGuide/src/H5Aff_f90.html -./fortran/doc/DevelGuide/src/H5_DBLE_InterfaceExclude_f90.html -./fortran/doc/DevelGuide/src/H5Eff_f90.html -./fortran/doc/DevelGuide/src/H5_ff_F03_f90.html -./fortran/doc/DevelGuide/src/H5Gff_f90.html -./fortran/doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html -./fortran/doc/DevelGuide/src/H5Iff_f90.html -./fortran/doc/DevelGuide/src/H5Dff_F03_f90.html -./fortran/doc/DevelGuide/src/H5Af_c.html -./fortran/doc/DevelGuide/src/H5Off_f90.html -./fortran/doc/DevelGuide/src/H5Df_c.html -./fortran/doc/DevelGuide/src/H5Sff_f90.html -./fortran/doc/DevelGuide/src/H5Ef_c.html -./fortran/doc/DevelGuide/src/HDF5mpio_f90.html -./fortran/doc/DevelGuide/src/H5Lff_F03_f90.html -./fortran/doc/DevelGuide/src/H5Ff_c.html -./fortran/doc/DevelGuide/src/H5f90global_f90.html -./fortran/doc/DevelGuide/src/H5Gf_c.html -./fortran/doc/DevelGuide/src/H5If_c.html -./fortran/doc/DevelGuide/src/H5Pff_F03_f90.html -./fortran/doc/DevelGuide/src/H5_ff_F90_f90.html -./fortran/doc/DevelGuide/src/H5Rff_F03_f90.html -./fortran/doc/DevelGuide/src/H5Lf_c.html -./fortran/doc/DevelGuide/src/H5Of_c.html -./fortran/doc/DevelGuide/src/H5Dff_F90_f90.html -./fortran/doc/DevelGuide/src/H5Pf_c.html -./fortran/doc/DevelGuide/src/H5FDmpioff_f90.html -./fortran/doc/DevelGuide/src/H5_ff_f90.html -./fortran/doc/DevelGuide/src/H5Rf_c.html -./fortran/doc/DevelGuide/src/H5Sf_c.html -./fortran/doc/DevelGuide/src/H5Tf_c.html -./fortran/doc/DevelGuide/src/H5Dff_f90.html -./fortran/doc/DevelGuide/src/H5Lff_F90_f90.html ./fortran/examples/Makefile.am ./fortran/examples/Makefile.in @@ -271,68 +188,44 @@ ./fortran/examples/rwdset_fortran2003.f90 ./fortran/src/H5_f.c -./fortran/src/H5_ff.f90 -./fortran/src/H5_ff_F90.f90 -./fortran/src/H5_ff_F03.f90 -./fortran/src/H5_DBLE_InterfaceInclude.f90 -./fortran/src/H5_DBLE_InterfaceExclude.f90 +./fortran/src/H5_ff.F90 ./fortran/src/H5Af.c -./fortran/src/H5Aff.f90 -./fortran/src/H5Aff_F90.f90 -./fortran/src/H5Aff_F03.f90 +./fortran/src/H5Aff.F90 ./fortran/src/H5Df.c -./fortran/src/H5Dff.f90 -./fortran/src/H5Dff_F90.f90 -./fortran/src/H5Dff_F03.f90 +./fortran/src/H5Dff.F90 ./fortran/src/H5Ef.c -./fortran/src/H5Eff.f90 -./fortran/src/H5Eff_F90.f90 -./fortran/src/H5Eff_F03.f90 -./fortran/src/H5FDmpiof.c -./fortran/src/H5FDmpioff.f90 +./fortran/src/H5Eff.F90 ./fortran/src/H5Ff.c -./fortran/src/H5Fff.f90 -./fortran/src/H5Fff_F90.f90 -./fortran/src/H5Fff_F03.f90 +./fortran/src/H5Fff.F90 ./fortran/src/H5Gf.c -./fortran/src/H5Gff.f90 +./fortran/src/H5Gff.F90 ./fortran/src/H5If.c -./fortran/src/H5Iff.f90 +./fortran/src/H5Iff.F90 ./fortran/src/H5Lf.c -./fortran/src/H5Lff.f90 -./fortran/src/H5Lff_F90.f90 -./fortran/src/H5Lff_F03.f90 +./fortran/src/H5Lff.F90 ./fortran/src/H5Of.c -./fortran/src/H5Off.f90 -./fortran/src/H5Off_F90.f90 -./fortran/src/H5Off_F03.f90 +./fortran/src/H5Off.F90 ./fortran/src/H5Pf.c -./fortran/src/H5Pff.f90 -./fortran/src/H5Pff_F90.f90 -./fortran/src/H5Pff_F03.f90 +./fortran/src/H5Pff.F90 ./fortran/src/H5Rf.c -./fortran/src/H5Rff.f90 -./fortran/src/H5Rff_F90.f90 -./fortran/src/H5Rff_F03.f90 +./fortran/src/H5Rff.F90 ./fortran/src/H5Sf.c -./fortran/src/H5Sff.f90 +./fortran/src/H5Sff.F90 ./fortran/src/H5Tf.c -./fortran/src/H5Tff.f90 -./fortran/src/H5Tff_F90.f90 -./fortran/src/H5Tff_F03.f90 +./fortran/src/H5Tff.F90 ./fortran/src/H5Zf.c -./fortran/src/H5Zff.f90 +./fortran/src/H5Zff.F90 ./fortran/src/H5f90.h -./fortran/src/H5f90global.f90 +./fortran/src/H5f90global.F90 ./fortran/src/H5f90i.h ./fortran/src/H5f90kit.c ./fortran/src/H5f90proto.h -./fortran/src/H5test_kind.f90 -./fortran/src/H5test_kind_SIZEOF.f90 -./fortran/src/H5test_kind_STORAGE_SIZE.f90 +./fortran/src/H5_buildiface.F90 ./fortran/src/H5match_types.c -./fortran/src/HDF5.f90 -./fortran/src/HDF5mpio.f90 +./fortran/src/HDF5.F90 +./fortran/src/H5config_f.inc.in +./fortran/src/H5config_f.inc.cmake +./fortran/src/H5fort_type_defines.h.in ./fortran/src/Makefile.am ./fortran/src/Makefile.in ./fortran/src/README @@ -347,12 +240,10 @@ ./fortran/test/fortranlib_test.f90 ./fortran/test/fortranlib_test_1_8.f90 ./fortran/test/fortranlib_test_F03.f90 +./fortran/test/H5_test_buildiface.F90 ./fortran/test/t.c ./fortran/test/t.h -./fortran/test/tf.f90 -./fortran/test/tf_F90.f90 -./fortran/test/tf_F03.f90 -./fortran/test/tf_F08.f90 +./fortran/test/tf.F90 ./fortran/test/tH5A.f90 ./fortran/test/tH5A_1_8.f90 ./fortran/test/tH5D.f90 @@ -372,7 +263,7 @@ ./fortran/test/tH5R.f90 ./fortran/test/tH5S.f90 ./fortran/test/tH5Sselect.f90 -./fortran/test/tH5T_F03.f90 +./fortran/test/tH5T_F03.F90 ./fortran/test/tH5T.f90 ./fortran/test/tH5VL.f90 ./fortran/test/tH5Z.f90 @@ -2492,25 +2383,27 @@ ./hl/fortran/examples/ex_ds1.f90 ./hl/fortran/examples/exlite.f90 ./hl/fortran/examples/run-hlfortran-ex.sh.in +./hl/fortran/src/hdf5_hl_fortrandll.def.in ./hl/fortran/src/H5DSfc.c -./hl/fortran/src/H5DSff.f90 +./hl/fortran/src/H5DSff.F90 ./hl/fortran/src/H5IMcc.c ./hl/fortran/src/H5IMcc.h ./hl/fortran/src/H5IMfc.c -./hl/fortran/src/H5IMff.f90 +./hl/fortran/src/H5IMff.F90 +./hl/fortran/src/H5HL_buildiface.F90 ./hl/fortran/src/H5LTf90proto.h ./hl/fortran/src/H5LTfc.c -./hl/fortran/src/H5LTff.f90 +./hl/fortran/src/H5LTff.F90 ./hl/fortran/src/H5TBfc.c -./hl/fortran/src/H5TBff.f90 +./hl/fortran/src/H5TBff.F90 ./hl/fortran/src/Makefile.am ./hl/fortran/src/Makefile.in ./hl/fortran/test/Makefile.am ./hl/fortran/test/Makefile.in -./hl/fortran/test/tstds.f90 -./hl/fortran/test/tstimage.f90 -./hl/fortran/test/tstlite.f90 -./hl/fortran/test/tsttable.f90 +./hl/fortran/test/tstds.F90 +./hl/fortran/test/tstimage.F90 +./hl/fortran/test/tstlite.F90 +./hl/fortran/test/tsttable.F90 # hl c++ ./hl/c++/COPYING diff --git a/Makefile.in b/Makefile.in index edee230..ce0c833 100644 --- a/Makefile.in +++ b/Makefile.in @@ -128,7 +128,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -288,14 +289,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -305,13 +313,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -353,6 +360,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/c++/Makefile.in b/c++/Makefile.in index c964e95..2315cc2 100644 --- a/c++/Makefile.in +++ b/c++/Makefile.in @@ -106,7 +106,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -448,14 +449,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -465,13 +473,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -513,6 +520,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/c++/examples/Makefile.in b/c++/examples/Makefile.in index 03bd135..6b0f894 100644 --- a/c++/examples/Makefile.in +++ b/c++/examples/Makefile.in @@ -112,7 +112,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-c++-ex.sh testh5c++.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -396,14 +397,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -413,13 +421,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -461,6 +468,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/c++/src/Makefile.in b/c++/src/Makefile.in index a4a7a74..3f99415 100644 --- a/c++/src/Makefile.in +++ b/c++/src/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = h5c++ CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -174,7 +175,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -459,14 +460,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -476,13 +484,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -524,6 +531,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/c++/test/Makefile.in b/c++/test/Makefile.in index 8711eef..0da1d86 100644 --- a/c++/test/Makefile.in +++ b/c++/test/Makefile.in @@ -108,7 +108,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = H5srcdir_str.h CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = testhdf5$(EXEEXT) @@ -136,7 +137,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -450,14 +451,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -467,13 +475,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -515,6 +522,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/config/cmake/HDF5UseFortran.cmake b/config/cmake/HDF5UseFortran.cmake index b3dec14..8ca10a7 100644 --- a/config/cmake/HDF5UseFortran.cmake +++ b/config/cmake/HDF5UseFortran.cmake @@ -227,9 +227,9 @@ message ( " ........MAX DECIMAL PRECISION ${H5_PAC_FC_MAX_REAL_PRECISION}") # ********** # INTEGERS # ********** -string(REGEX REPLACE "," ";" VAR_KIND "${pac_validIntKinds}") +string(REGEX REPLACE "," ";" VAR "${pac_validIntKinds}") -foreach( KIND ${VAR_KIND} ) +foreach( KIND ${VAR} ) set(PROG_SRC " PROGRAM main @@ -262,14 +262,14 @@ message("...FOUND SIZEOF for INTEGER KINDs ${PAC_FC_ALL_INTEGER_KINDS_SIZEOF}") # ********** # REALS # ********** -string(REGEX REPLACE "," ";" VAR_KIND "${pac_validRealKinds}") +string(REGEX REPLACE "," ";" VAR "${pac_validRealKinds}") #find the maximum kind of the real -list(LENGTH VAR_KIND LEN_VAR_KIND) -MATH (EXPR _LEN "${LEN_VAR_KIND} - 1") -list(GET VAR_KIND ${_LEN} max_real_fortran_kind) +list(LENGTH VAR LEN_VAR) +MATH (EXPR _LEN "${LEN_VAR}-1") +list(GET VAR ${_LEN} max_real_fortran_kind) -foreach( KIND ${VAR_KIND} ) +foreach( KIND ${VAR} ) set(PROG_SRC " PROGRAM main @@ -299,12 +299,14 @@ set(H5CONFIG_F_RKIND_SIZEOF "INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = message("...FOUND SIZEOF for REAL KINDs \{${pack_real_sizeof}\}") +set(PAC_FC_ALL_REAL_KINDS_SIZEOF "\{${pack_real_sizeof}\}") + #find the maximum kind of the real -list(LENGTH VAR_KIND LEN_VAR_KIND) -MATH (EXPR _LEN "${LEN_VAR_KIND} - 1") -list(GET VAR_KIND ${_LEN} max_real_fortran_sizeof) +string(REGEX REPLACE "," ";" VAR "${pack_real_sizeof}") +list(LENGTH VAR LEN_VAR) +MATH (EXPR _LEN "${LEN_VAR}-1") +list(GET VAR ${_LEN} max_real_fortran_sizeof) -set(PAC_FC_ALL_REAL_KINDS_SIZEOF "\{${pack_real_sizeof}\}") #----------------------------------------------------------------------------- # Find sizeof of native kinds #----------------------------------------------------------------------------- @@ -351,14 +353,18 @@ set(FORTRAN_SIZEOF_LONG_DOUBLE ${${HDF_PREFIX}_SIZEOF_LONG_DOUBLE}) # remove the invalid kind from the list if(NOT(${SIZEOF___FLOAT128} EQUAL 0)) - if(NOT(${SIZEOF___FLOAT128} EQUAL ${max_real_fortran_sizeof}) AND NOT(${FORTRAN_SIZEOF_LONG_DOUBLE} EQUAL ${max_real_fortran_sizeof})) + if(NOT(${SIZEOF___FLOAT128} EQUAL ${max_real_fortran_sizeof}) + AND NOT(${FORTRAN_SIZEOF_LONG_DOUBLE} EQUAL ${max_real_fortran_sizeof}) + # account for the fact that the C compiler can have 16-byte __float128 and the fortran compiler only has 8-byte doubles, + # so we don't want to remove the 8-byte fortran doubles. + AND NOT(${PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF} EQUAL ${max_real_fortran_sizeof})) message(WARNING " Fortran REAL(KIND=${max_real_fortran_kind}) is $max_real_fortran_sizeof Bytes, but no corresponding C float type exists of that size !!! Fortran interfaces will not be generated for REAL(KIND=${max_real_fortran_kind}) !!!") string(REGEX REPLACE ",[0-9]+}" "}" PAC_FC_ALL_REAL_KINDS ${PAC_FC_ALL_REAL_KINDS}) string(REGEX REPLACE ",[0-9]+}" "}" PAC_FC_ALL_REAL_KINDS_SIZEOF ${PAC_FC_ALL_REAL_KINDS_SIZEOF}) MATH (EXPR NUM_RKIND "${NUM_RKIND} - 1") - endif(NOT(${SIZEOF___FLOAT128} EQUAL ${max_real_fortran_sizeof}) AND NOT(${FORTRAN_SIZEOF_LONG_DOUBLE} EQUAL ${max_real_fortran_sizeof})) + endif() endif(NOT(${SIZEOF___FLOAT128} EQUAL 0)) set(H5CONFIG_F_NUM_RKIND "INTEGER, PARAMETER :: num_rkinds = ${NUM_RKIND}") @@ -377,9 +383,7 @@ ENABLE_LANGUAGE (C) # The provided CMake C macros don't provide a general compile/run function # so this one is used. #----------------------------------------------------------------------------- -MACRO (C_RUN FUNCTION CODE RUN_RESULT_VAR COMPILE_RESULT_VAR RETURN) -# MSB CHECK WHY THIS CHECK? -# if (NOT DEFINED ${RUN_RESULT_VAR}) +MACRO (C_RUN FUNCTION CODE RETURN) message (STATUS "Detecting C ${FUNCTION}") if (CMAKE_REQUIRED_LIBRARIES) set (CHECK_FUNCTION_EXISTS_ADD_LIBRARIES @@ -391,7 +395,7 @@ MACRO (C_RUN FUNCTION CODE RUN_RESULT_VAR COMPILE_RESULT_VAR RETURN) ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c ${CODE} ) - TRY_RUN (${RUN_RESULT_VAR} ${COMPILE_RESULT_VAR} + TRY_RUN (RUN_RESULT_VAR COMPILE_RESULT_VAR ${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeTmp/testCCompiler1.c CMAKE_FLAGS "${CHECK_FUNCTION_EXISTS_ADD_LIBRARIES}" @@ -400,18 +404,14 @@ MACRO (C_RUN FUNCTION CODE RUN_RESULT_VAR COMPILE_RESULT_VAR RETURN) set(${RETURN} ${OUTPUT}) - #message ( "Test result1 ${RETURN} ") - #message ( "Test result3 ${RESULT} ") - #message ( "Test result2 ${CMAKE_MATCH_0} ") - #message ( "Test result4 ${CMAKE_MATCH_1} ") #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test result ${COMPILE_RESULT_VAR} ") + #message ( "Test COMPILE_RESULT_VAR ${COMPILE_RESULT_VAR} ") #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") - #message ( "Test result ${RUN_RESULT_VAR} ") + #message ( "Test RUN_RESULT_VAR ${RUN_RESULT_VAR} ") #message ( "* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ") if (${COMPILE_RESULT_VAR}) - if (${RUN_RESULT_VAR} MATCHES 0) + if (${RUN_RESULT_VAR} MATCHES 1) set (${RUN_RESULT_VAR} 1 CACHE INTERNAL "Have C function ${FUNCTION}") message (STATUS "Testing C ${FUNCTION} - OK") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeOutput.log @@ -420,13 +420,14 @@ MACRO (C_RUN FUNCTION CODE RUN_RESULT_VAR COMPILE_RESULT_VAR RETURN) ) else () message (STATUS "Testing C ${FUNCTION} - Fail") - set (${RUN_RESULT_VAR} "" CACHE INTERNAL "Have C function ${FUNCTION}") + set (${RUN_RESULT_VAR} 0 CACHE INTERNAL "Have C function ${FUNCTION}") file (APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log "Determining if the C ${FUNCTION} exists failed with the following output:\n" "${OUTPUT}\n\n") endif () + else () + message (FATAL_ERROR "Compilation of C ${FUNCTION} - Failed") endif() -# endif (NOT DEFINED ${RUN_RESULT_VAR}) ENDMACRO (C_RUN) set(PROG_SRC @@ -451,17 +452,14 @@ set(PROG_SRC #else #define C_LDBL_DIG LDBL_DIG #endif - void main() { + int main() { printf(\"%d\\\\n%d\\\\n\", C_LDBL_DIG, C_FLT128_DIG)\\\; + return 1\\\; } " ) -C_RUN("maximum decimal precision for C" ${PROG_SRC} - XX - YY - PROG_OUTPUT -) +C_RUN("maximum decimal precision for C" ${PROG_SRC} PROG_OUTPUT) # dnl The output from the above program will be: # dnl -- LINE 1 -- long double decimal precision diff --git a/configure b/configure index 9167c01..cc5b0f1 100755 --- a/configure +++ b/configure @@ -199,6 +199,7 @@ test -x / || exit 1" as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' @@ -206,8 +207,7 @@ test -x / || exit 1" ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO PATH=/empty FPATH=/empty; export PATH FPATH test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else @@ -682,7 +682,6 @@ AM_MAKEFLAGS LT_STATIC_EXEC USE_PLUGINS_CONDITIONAL_FALSE USE_PLUGINS_CONDITIONAL_TRUE -CPP OTOOL64 OTOOL LIPO @@ -699,8 +698,6 @@ ac_ct_DUMPBIN DUMPBIN LD FGREP -EGREP -GREP SED LIBTOOL FORTRAN_SHARED_CONDITIONAL_FALSE @@ -713,7 +710,6 @@ PARALLEL TIME TR AR -PERL HL_FOR HL CXXCPP @@ -722,16 +718,26 @@ am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS -FORTRAN_DEFAULT_REALisDBLE_F_FALSE -FORTRAN_DEFAULT_REALisDBLE_F_TRUE -FORTRAN_2003_CONDITIONAL_F_FALSE -FORTRAN_2003_CONDITIONAL_F_TRUE -FORTRAN_HAVE_STORAGE_SIZE_FALSE -FORTRAN_HAVE_STORAGE_SIZE_TRUE -FORTRAN_HAVE_C_SIZEOF_FALSE -FORTRAN_HAVE_C_SIZEOF_TRUE -FORTRAN_HAVE_SIZEOF_FALSE -FORTRAN_HAVE_SIZEOF_TRUE +H5CONFIG_F_IKIND +H5CONFIG_F_NUM_IKIND +H5CONFIG_F_RKIND_SIZEOF +H5CONFIG_F_RKIND +H5CONFIG_F_NUM_RKIND +FORTRAN_SIZEOF_LONG_DOUBLE +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE +FORTRAN_HAVE_C_LONG_DOUBLE +HAVE_Fortran_INTEGER_SIZEOF_16 +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF +PAC_FORTRAN_NATIVE_DOUBLE_KIND +PAC_FORTRAN_NATIVE_REAL_SIZEOF +PAC_FORTRAN_NATIVE_REAL_KIND +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF +PAC_FORTRAN_NATIVE_INTEGER_KIND +PAC_FC_ALL_INTEGER_KINDS_SIZEOF +PAC_FC_ALL_REAL_KINDS_SIZEOF +PAC_FC_ALL_INTEGER_KINDS +PAC_FC_MAX_REAL_PRECISION +PAC_FC_ALL_REAL_KINDS FCLIBS F9XMODEXT F9XMODFLAG @@ -748,8 +754,10 @@ HSIZE_T HADDR_T R_INTEGER R_LARGE -HAVE_FORTRAN_2003 HDF5_INTERFACES +EGREP +GREP +CPP am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE @@ -766,6 +774,7 @@ ac_ct_CC LDFLAGS CFLAGS CC +PAC_C_MAX_REAL_PRECISION UNAME_INFO enable_static enable_shared @@ -778,9 +787,7 @@ INSTRUMENT HDF5_HL CXX HDF_CXX -FC2003 FC -HDF_FORTRAN2003 HDF_FORTRAN STATIC_EXEC MPE @@ -834,6 +841,7 @@ am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM +PERL target_alias host_alias build_alias @@ -880,7 +888,6 @@ enable_maintainer_mode enable_dependency_tracking enable_unsupported enable_fortran -enable_fortran2003 enable_cxx enable_hl enable_shared @@ -926,13 +933,13 @@ CFLAGS LDFLAGS LIBS CPPFLAGS +CPP FC FCFLAGS CXX CXXFLAGS CCC -CXXCPP -CPP' +CXXCPP' # Initialize some variables set by options. @@ -1561,9 +1568,7 @@ Optional Features: --disable-dependency-tracking speeds up one-time build --enable-unsupported Allow unsupported combinations of configure options - --enable-fortran Compile the Fortran 90/95 interface [default=no] - --enable-fortran2003 Compile the Fortran 2003 interface, must also - specify --enable-fortran [default=no] + --enable-fortran Compile the Fortran interface [default=no] --enable-cxx Compile the C++ interface [default=no] --enable-hl Enable the high level library [default=yes] --enable-shared[=PKGS] build shared libraries [default=yes] @@ -1660,12 +1665,12 @@ Some influential environment variables: LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory + CPP C preprocessor FC Fortran compiler command FCFLAGS Fortran compiler flags CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor - CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1785,59 +1790,74 @@ fi } # ac_fn_c_try_compile -# ac_fn_fc_try_compile LINENO -# --------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_fc_try_compile () +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_fc_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : - ac_retval=1 +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval -} # ac_fn_fc_try_compile +} # ac_fn_c_check_type -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" + if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 @@ -1845,37 +1865,29 @@ $as_echo "$ac_try_echo"; } >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 + ac_retval=1 fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval -} # ac_fn_c_try_link +} # ac_fn_c_try_cpp -# ac_fn_fc_try_link LINENO -# ------------------------ -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_fc_try_link () +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; @@ -1883,204 +1895,354 @@ case "(($ac_try" in esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err + (eval "$ac_link") 2>&5 ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_fc_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_fc_try_link - -# ac_fn_cxx_try_compile LINENO -# ---------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err + (eval "$ac_try") 2>&5 ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : + test $ac_status = 0; }; }; then : ac_retval=0 else - $as_echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 + ac_retval=$ac_status fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval -} # ac_fn_cxx_try_compile +} # ac_fn_c_try_run -# ac_fn_cxx_try_cpp LINENO -# ------------------------ -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_cpp () +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval -} # ac_fn_cxx_try_cpp +} # ac_fn_c_check_header_compile -# ac_fn_cxx_try_link LINENO -# ------------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_link () +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid; break else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; - ac_retval=1 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=$ac_mid; break +else + as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + ac_lo= ac_hi= +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid +else + as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval () { return $2; } +static unsigned long int ulongval () { return $2; } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo >>conftest.val; read $3 &5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" + ac_header_compiler=yes else - eval "$3=no" + ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } -} # ac_fn_c_check_header_compile +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## -------------------------------- ## +## Report this to help@hdfgroup.org ## +## -------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_fc_try_compile LINENO +# --------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_fc_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 @@ -2088,27 +2250,119 @@ $as_echo "$ac_try_echo"; } >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test $ac_status = 0; } && { + test -z "$ac_fc_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_fc_try_compile + +# ac_fn_fc_try_link LINENO +# ------------------------ +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_fc_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_fc_werror_flag" || test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 + ac_retval=1 fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval -} # ac_fn_c_try_cpp +} # ac_fn_fc_try_link -# ac_fn_c_try_run LINENO -# ---------------------- +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_fc_try_run LINENO +# ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. -ac_fn_c_try_run () +ac_fn_fc_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" @@ -2144,179 +2398,133 @@ fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval -} # ac_fn_c_try_run +} # ac_fn_fc_try_run -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () +# ac_fn_cxx_try_compile LINENO +# ---------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + ac_retval=1 fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -} # ac_fn_c_check_func +} # ac_fn_cxx_try_compile -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () +# ac_fn_cxx_try_cpp LINENO +# ------------------------ +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no + ac_retval=1 fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## -------------------------------- ## -## Report this to help@hdfgroup.org ## -## -------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; +} # ac_fn_cxx_try_cpp + +# ac_fn_cxx_try_link LINENO +# ------------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_cxx_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -} # ac_fn_c_check_header_mongrel +} # ac_fn_cxx_try_link -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 @@ -2324,10 +2532,39 @@ $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else - eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$4 +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -2339,13 +2576,40 @@ $4 int main () { -if (sizeof ($2)) - return 0; +return $2 (); ; return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES +# --------------------------------------------- +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. +ac_fn_c_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +$as_echo_n "checking whether $as_decl_name is declared... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 @@ -2360,18 +2624,22 @@ $4 int main () { -if (sizeof (($2))) - return 0; +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : - -else eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi @@ -2380,347 +2648,62 @@ eval ac_res=\$$3 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno -} # ac_fn_c_check_type +} # ac_fn_c_check_decl +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. -# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES -# -------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_c_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0; -return test_array [0]; +It was created by HDF5 $as_me 1.9.223-swmr1, which was +generated by GNU Autoconf 2.69. Invocation command line was - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; + $ $0 $@ - ; - return 0; -} _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid; break -else - as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () +exec 5>>config.log { -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0; -return test_array [0]; +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=$ac_mid; break -else - as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" done -else - ac_lo= ac_hi= -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; +IFS=$as_save_IFS - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid -else - as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval () { return $2; } -static unsigned long int ulongval () { return $2; } -#include -#include -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ +} >&5 - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; +cat >&5 <<_ACEOF - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo >>conftest.val; read $3 &5 -$as_echo_n "checking whether $as_decl_name is declared... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -#ifndef $as_decl_name -#ifdef __cplusplus - (void) $as_decl_use; -#else - (void) $as_decl_name; -#endif -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_decl -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by HDF5 $as_me 1.9.223-swmr1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF +_ACEOF # Keep a trace of the command line. @@ -3019,6 +3002,54 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu +## PLACE CHECKS FOR REQUIRED PACKAGES NEEDED TO INSTALL HDF5 AT THE BEGINNING +## -------------------------------------------------------------------------- +## Requirement #1: Check if Perl is installed. +## + PERL="" +# Extract the first word of "perl", so it can be a program name with args. +set dummy perl; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$PERL"; then + ac_cv_prog_PERL="$PERL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_PERL="" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_PERL" && ac_cv_prog_PERL="$PATH" +fi +fi +PERL=$ac_cv_prog_PERL +if test -n "$PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5 +$as_echo "$PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +if test "x$PERL" = "xfalse"; then + as_fn_error $? "*** Perl is required for installing HDF5, but Perl could not be found!" "$LINENO" 5 +fi + + ac_config_headers="$ac_config_headers src/H5config.h" @@ -3868,7 +3899,6 @@ $as_echo "done" >&6; } ## MPE: whether MPE option is enabled. Default no. ## STATIC_EXEC: whether static-exec is enabled. Default no. ## HDF_FORTRAN: whether Fortran is enabled. Default no. -## HDF_FORTRAN2003: whether Fortran 2003 is enabled. Default no. ## FC: Fortran compiler. ## HDF_CXX: whether C++ is enabled. Default no. ## CXX: C++ compiler. @@ -3876,6 +3906,7 @@ $as_echo "done" >&6; } ## INSTRUMENT: whether INSTRUMENT is enabled. No default set here. ## CODESTACK: whether CODESTACK is enabled. Default no. ## HAVE_DMALLOC: whether system has dmalloc support. Default no. +## HAVE_FLOAT128: whether system has Quad-Precision Math Library. Default no. ## DIRECT_VFD: whether DIRECT_VFD is enabled. Default no. ## THREADSAFE: whether THREADSAFE is enabled. Default no. ## STATIC_SHARED: whether static and/or shared libraries are requested. @@ -3887,9 +3918,7 @@ $as_echo "done" >&6; } MPE=no STATIC_EXEC=no HDF_FORTRAN=no - HDF_FORTRAN2003=no HDF_FORTRAN=no - HDF_FORTRAN2003=no HDF_CXX=no HDF_CXX=no HDF5_HL=yes @@ -3903,6 +3932,7 @@ $as_echo "done" >&6; } UNAME_INFO=`uname -a` + ## ---------------------------------------------------------------------- ## Some platforms have broken basename, and/or xargs programs. Check ## that it actually does what it's supposed to do. Catch this early @@ -5120,1583 +5150,1236 @@ $as_echo "yes" >&6; } esac ## ---------------------------------------------------------------------- -## Check if they would like the Fortran interface compiled +## Data types and their sizes. ## - HDF5_INTERFACES="" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran interface enabled" >&5 -$as_echo_n "checking if Fortran interface enabled... " >&6; } -# Check whether --enable-fortran was given. -if test "${enable_fortran+set}" = set; then : - enableval=$enable_fortran; HDF_FORTRAN=$enableval -fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : -if test "X$HDF_FORTRAN" = "Xyes"; then - echo "yes" else - echo "no" + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.i conftest.$ac_ext - -## ---------------------------------------------------------------------- -## Check if they would like the Fortran 2003 interface compiled -## -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran 2003 interface enabled" >&5 -$as_echo_n "checking if Fortran 2003 interface enabled... " >&6; } -# Check whether --enable-fortran2003 was given. -if test "${enable_fortran2003+set}" = set; then : - enableval=$enable_fortran2003; HDF_FORTRAN2003=$enableval + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.i conftest.$ac_ext +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi -## ---------------------------------------------------------------------- -## Check to make sure --enable-fortran is present if --enable-fortran2003 -## was specified + done + ac_cv_prog_CPP=$CPP -if test "X$HDF_FORTRAN2003" = "Xyes" && test "X$HDF_FORTRAN" = "Xno"; then - echo "no" - as_fn_error $? "--enable-fortran must be used with --enable-fortran2003" "$LINENO" 5 +fi + CPP=$ac_cv_prog_CPP else - if test "X$HDF_FORTRAN2003" = "Xyes" && test "X$HDF_FORTRAN" = "Xyes"; then - echo "yes" - else - echo "no" - fi + ac_cv_prog_CPP=$CPP fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : -if test "X$HDF_FORTRAN" = "Xyes"; then - - HDF_FORTRAN=yes - - - HDF5_INTERFACES="$HDF5_INTERFACES fortran" - - ## -------------------------------------------------------------------- - ## HDF5 integer variables for the H5fortran_types.f90 file. - ## - - - +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - ## -------------------------------------------------------------------- - ## Fortran source extention - ## - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_FC+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$FC"; then - ac_cv_prog_FC="$FC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_FC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break done -IFS=$as_save_IFS + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac -fi -fi -FC=$ac_cv_prog_FC -if test -n "$FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5 -$as_echo "$FC" >&6; } + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + ac_cv_path_GREP=$GREP fi - - test -n "$FC" && break - done fi -if test -z "$FC"; then - ac_ct_FC=$FC - for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_FC+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_FC"; then - ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_FC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break done -IFS=$as_save_IFS + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac -fi -fi -ac_ct_FC=$ac_cv_prog_ac_ct_FC -if test -n "$ac_ct_FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5 -$as_echo "$ac_ct_FC" >&6; } + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + ac_cv_path_EGREP=$EGREP fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" - test -n "$ac_ct_FC" && break -done - if test "x$ac_ct_FC" = x; then - FC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - FC=$ac_ct_FC - fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done -rm -f a.out +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5 -$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } -if ${ac_cv_fc_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 else - cat > conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me -#endif + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include - end _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_compiler_gnu=yes +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + else - ac_compiler_gnu=no + ac_cv_header_stdc=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_fc_compiler_gnu=$ac_compiler_gnu +rm -f conftest* fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5 -$as_echo "$ac_cv_fc_compiler_gnu" >&6; } -ac_ext=$ac_save_ext -ac_test_FCFLAGS=${FCFLAGS+set} -ac_save_FCFLAGS=$FCFLAGS -FCFLAGS= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5 -$as_echo_n "checking whether $FC accepts -g... " >&6; } -if ${ac_cv_prog_fc_g+:} false; then : - $as_echo_n "(cached) " >&6 + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : else - FCFLAGS=-g -cat > conftest.$ac_ext <<_ACEOF - program main + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif - end +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_cv_prog_fc_g=yes +if ac_fn_c_try_run "$LINENO"; then : + else - ac_cv_prog_fc_g=no + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5 -$as_echo "$ac_cv_prog_fc_g" >&6; } -if test "$ac_test_FCFLAGS" = set; then - FCFLAGS=$ac_save_FCFLAGS -elif test $ac_cv_prog_fc_g = yes; then - if test "x$ac_cv_fc_compiler_gnu" = xyes; then - FCFLAGS="-g -O2" - else - FCFLAGS="-g" - fi -else - if test "x$ac_cv_fc_compiler_gnu" = xyes; then - FCFLAGS="-O2" - else - FCFLAGS= - fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h -if test $ac_compiler_gnu = yes; then - GFC=yes -else - GFC= fi -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" +if test "x$ac_cv_type_off_t" = xyes; then : -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran flag to compile .f90 files" >&5 -$as_echo_n "checking for Fortran flag to compile .f90 files... " >&6; } -if ${ac_cv_fc_srcext_f90+:} false; then : - $as_echo_n "(cached) " >&6 else - ac_ext=f90 -ac_fcflags_srcext_save=$ac_fcflags_srcext -ac_fcflags_srcext= -ac_cv_fc_srcext_f90=unknown -case $ac_ext in #( - [fF]77) ac_try=f77;; #( - *) ac_try=f95;; -esac -for ac_flag in none -qsuffix=f=f90 -Tf "-x $ac_try"; do - test "x$ac_flag" != xnone && ac_fcflags_srcext="$ac_flag" - cat > conftest.$ac_ext <<_ACEOF - program main - end +cat >>confdefs.h <<_ACEOF +#define off_t long int _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_cv_fc_srcext_f90=$ac_flag; break + fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest.$ac_objext conftest.f90 -ac_fcflags_srcext=$ac_fcflags_srcext_save + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned long +_ACEOF fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_srcext_f90" >&5 -$as_echo "$ac_cv_fc_srcext_f90" >&6; } -if test "x$ac_cv_fc_srcext_f90" = xunknown; then - as_fn_error $? "Fortran could not compile .f90 files" "$LINENO" 5 + +ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" +if test "x$ac_cv_type_ssize_t" = xyes; then : + else - ac_fc_srcext=f90 - if test "x$ac_cv_fc_srcext_f90" = xnone; then - ac_fcflags_srcext="" - FCFLAGS_f90="" - else - ac_fcflags_srcext=$ac_cv_fc_srcext_f90 - FCFLAGS_f90=$ac_cv_fc_srcext_f90 - fi +cat >>confdefs.h <<_ACEOF +#define ssize_t long +_ACEOF fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default" +if test "x$ac_cv_type_ptrdiff_t" = xyes; then : +else +cat >>confdefs.h <<_ACEOF +#define ptrdiff_t long +_ACEOF +fi - ## -------------------------------------------------------------------- - ## Check for a Fortran compiler and how to include modules. - ## - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in gfortran ifort pgf90 pathf90 pathf95 xlf90 xlf95 xlf2003 f90 epcf90 f95 fort lf95 g95 ifc efc gfc - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_FC+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 +$as_echo_n "checking whether byte ordering is bigendian... " >&6; } +if ${ac_cv_c_bigendian+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$FC"; then - ac_cv_prog_FC="$FC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_FC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -FC=$ac_cv_prog_FC -if test -n "$FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5 -$as_echo "$FC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$FC" && break - done -fi -if test -z "$FC"; then - ac_ct_FC=$FC - for ac_prog in gfortran ifort pgf90 pathf90 pathf95 xlf90 xlf95 xlf2003 f90 epcf90 f95 fort lf95 g95 ifc efc gfc -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_FC"; then - ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_FC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_FC=$ac_cv_prog_ac_ct_FC -if test -n "$ac_ct_FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5 -$as_echo "$ac_ct_FC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - + ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; - test -n "$ac_ct_FC" && break -done +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : - if test "x$ac_ct_FC" = x; then - FC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - FC=$ac_ct_FC - fi + # Check for potential -arch flags. It is not universal unless + # there are at least two -arch flags with different values. + ac_arch= + ac_prev= + for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do + if test -n "$ac_prev"; then + case $ac_word in + i?86 | x86_64 | ppc | ppc64) + if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then + ac_arch=$ac_word + else + ac_cv_c_bigendian=universal + break + fi + ;; + esac + ac_prev= + elif test "x$ac_word" = "x-arch"; then + ac_prev=arch + fi + done fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include +int +main () +{ +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ + && LITTLE_ENDIAN) + bogus endian macros + #endif -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done -rm -f a.out + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5 -$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } -if ${ac_cv_fc_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me -#endif +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian + #endif - end + ; + return 0; +} _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_compiler_gnu=yes +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes else - ac_compiler_gnu=no + ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_fc_compiler_gnu=$ac_compiler_gnu - fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5 -$as_echo "$ac_cv_fc_compiler_gnu" >&6; } -ac_ext=$ac_save_ext -ac_test_FCFLAGS=${FCFLAGS+set} -ac_save_FCFLAGS=$FCFLAGS -FCFLAGS= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5 -$as_echo_n "checking whether $FC accepts -g... " >&6; } -if ${ac_cv_prog_fc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - FCFLAGS=-g -cat > conftest.$ac_ext <<_ACEOF - program main +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include - end +int +main () +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} _ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_cv_prog_fc_g=yes +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main () +{ +#ifndef _BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_bigendian=yes else - ac_cv_prog_fc_g=no + ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5 -$as_echo "$ac_cv_prog_fc_g" >&6; } -if test "$ac_test_FCFLAGS" = set; then - FCFLAGS=$ac_save_FCFLAGS -elif test $ac_cv_prog_fc_g = yes; then - if test "x$ac_cv_fc_compiler_gnu" = xyes; then - FCFLAGS="-g -O2" - else - FCFLAGS="-g" - fi -else - if test "x$ac_cv_fc_compiler_gnu" = xyes; then - FCFLAGS="-O2" - else - FCFLAGS= - fi fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes; then : + # Try to guess by grepping values from an object file. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + extern int foo; -if test $ac_compiler_gnu = yes; then - GFC=yes -else - GFC= +int +main () +{ +return use_ascii (foo) == use_ebcdic (foo); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what $FC does with modules" >&5 -$as_echo_n "checking what $FC does with modules... " >&6; } -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_c_bigendian=no +else + ac_cv_c_bigendian=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi -test -d conftestdir || mkdir conftestdir -cd conftestdir -rm -rf * + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 +$as_echo "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h +;; #( + no) + ;; #( + universal) -cat >conftest.$ac_ext <>confdefs.h -eval $ac_compile -modfiles="" -F9XMODEXT="" + ;; #( + *) + as_fn_error $? "unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; + esac -for f in conftest.o module.mod MODULE.mod module.M MODULE.M; do - if test -f "$f" ; then - modfiles="$f" +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5 +$as_echo_n "checking size of char... " >&6; } +if ${ac_cv_sizeof_char+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char))" "ac_cv_sizeof_char" "$ac_includes_default"; then : - case "$f" in - *.o) F9XMODEXT="o" ;; - *.mod) F9XMODEXT="mod" ;; - *.M) F9XMODEXT="M" ;; - esac - fi -done +else + if test "$ac_cv_type_char" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (char) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_char=0 + fi +fi -echo $modfiles 6>&1 -if test "$modfiles" = file.o; then - echo $ac_n "checking whether $FC -em is saner""... $ac_c" 1>&6 - OLD_FCFLAGS=$FCFLAGS - FCFLAGS="$FCFLAGS -em" - eval $ac_compile - modfiles="" - for f in file.o module.mod MODULE.mod module.M MODULE.M; do - test -f $f && modfiles="$f" - done - if test "$modfiles" = "file.o"; then - FCFLAGS=$OLD_FCFLAGS - echo no 6>&1 - else - echo yes 6>&1 - fi fi -cd .. +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5 +$as_echo "$ac_cv_sizeof_char" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how $FC finds modules" >&5 -$as_echo_n "checking how $FC finds modules... " >&6; } -for flag in "-I" "-M" "-p"; do - cat >conftest.$ac_ext <>confdefs.h <<_ACEOF +#define SIZEOF_CHAR $ac_cv_sizeof_char +_ACEOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - F9XMODFLAG=$flag - break - fi -done -if test -n "$F9XMODFLAG"; then - echo $F9XMODFLAG 1>&6 - FCFLAGS="$F9XMODFLAG. $FCFLAGS" +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5 +$as_echo_n "checking size of short... " >&6; } +if ${ac_cv_sizeof_short+:} false; then : + $as_echo_n "(cached) " >&6 else - echo unknown 1>&6 -fi + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then : +else + if test "$ac_cv_type_short" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (short) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_short=0 + fi +fi -rm -rf conftest* -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5 +$as_echo "$ac_cv_sizeof_short" >&6; } - ## Change to the Fortran 90 language - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu +cat >>confdefs.h <<_ACEOF +#define SIZEOF_SHORT $ac_cv_sizeof_short +_ACEOF - ## -------------------------------------------------------------------- - ## Define wrappers for the C compiler to use Fortran function names - ## - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $FC" >&5 -$as_echo_n "checking how to get verbose linking output from $FC... " >&6; } -if ${ac_cv_prog_fc_v+:} false; then : +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5 +$as_echo_n "checking size of int... " >&6; } +if ${ac_cv_sizeof_int+:} false; then : $as_echo_n "(cached) " >&6 else - cat > conftest.$ac_ext <<_ACEOF - program main + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then : - end -_ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - ac_cv_prog_fc_v= -# Try some options frequently used verbose output -for ac_verb in -v -verbose --verbose -V -\#\#\#; do - cat > conftest.$ac_ext <<_ACEOF - program main +else + if test "$ac_cv_type_int" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (int) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_int=0 + fi +fi - end +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5 +$as_echo "$ac_cv_sizeof_int" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int _ACEOF -# Compile and link our simple test program by passing a flag (argument -# 1 to this macro) to the Fortran compiler in order to get -# "verbose" output that we can then parse for the Fortran linker -# flags. -ac_save_FCFLAGS=$FCFLAGS -FCFLAGS="$FCFLAGS $ac_verb" -eval "set x $ac_link" -shift -$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 -# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, -# LIBRARY_PATH; skip all such settings. -ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | - sed '/^Driving:/d; /^Configured with:/d; - '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` -$as_echo "$ac_fc_v_output" >&5 -FCFLAGS=$ac_save_FCFLAGS -rm -rf conftest* +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned" >&5 +$as_echo_n "checking size of unsigned... " >&6; } +if ${ac_cv_sizeof_unsigned+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned))" "ac_cv_sizeof_unsigned" "$ac_includes_default"; then : -# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where -# /foo, /bar, and /baz are search directories for the Fortran linker. -# Here, we change these into -L/foo -L/bar -L/baz (and put it first): -ac_fc_v_output="`echo $ac_fc_v_output | - grep 'LPATH is:' | - sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output" +else + if test "$ac_cv_type_unsigned" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (unsigned) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_unsigned=0 + fi +fi -# FIXME: we keep getting bitten by quoted arguments; a more general fix -# that detects unbalanced quotes in FLIBS should be implemented -# and (ugh) tested at some point. -case $ac_fc_v_output in - # With xlf replace commas with spaces, - # and remove "-link" and closing parenthesis. - *xlfentry*) - ac_fc_v_output=`echo $ac_fc_v_output | - sed ' - s/,/ /g - s/ -link / /g - s/) *$// - ' - ` ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned" >&5 +$as_echo "$ac_cv_sizeof_unsigned" >&6; } - # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted - # $LIBS confuse us, and the libraries appear later in the output anyway). - *mGLOB_options_string*) - ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;; - # Portland Group compiler has singly- or doubly-quoted -cmdline argument - # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4. - # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". - *-cmdline\ * | *-ignore\ * | *-def\ *) - ac_fc_v_output=`echo $ac_fc_v_output | sed "\ - s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g - s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g - s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; - # If we are using fort77 (the f2c wrapper) then filter output and delete quotes. - *fort77*f2c*gcc*) - ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n ' - /:[ ]\+Running[ ]\{1,\}"gcc"/{ - /"-c"/d - /[.]c"*/d - s/^.*"gcc"/"gcc"/ - s/"//gp - }'` ;; +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UNSIGNED $ac_cv_sizeof_unsigned +_ACEOF - # If we are using Cray Fortran then delete quotes. - *cft90*) - ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;; -esac +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 +$as_echo_n "checking size of long... " >&6; } +if ${ac_cv_sizeof_long+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then : - # look for -l* and *.a constructs in the output - for ac_arg in $ac_fc_v_output; do - case $ac_arg in - [\\/]*.a | ?:[\\/]*.a | -[lLRu]*) - ac_cv_prog_fc_v=$ac_verb - break 2 ;; - esac - done -done -if test -z "$ac_cv_prog_fc_v"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $FC" >&5 -$as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $FC" >&2;} -fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5 -$as_echo "$as_me: WARNING: compilation failed" >&2;} + if test "$ac_cv_type_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long=0 + fi fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_v" >&5 -$as_echo "$ac_cv_prog_fc_v" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran libraries of $FC" >&5 -$as_echo_n "checking for Fortran libraries of $FC... " >&6; } -if ${ac_cv_fc_libs+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$FCLIBS" != "x"; then - ac_cv_fc_libs="$FCLIBS" # Let the user override the test. -else +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 +$as_echo "$ac_cv_sizeof_long" >&6; } -cat > conftest.$ac_ext <<_ACEOF - program main - end -_ACEOF -# Compile and link our simple test program by passing a flag (argument -# 1 to this macro) to the Fortran compiler in order to get -# "verbose" output that we can then parse for the Fortran linker -# flags. -ac_save_FCFLAGS=$FCFLAGS -FCFLAGS="$FCFLAGS $ac_cv_prog_fc_v" -eval "set x $ac_link" -shift -$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 -# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, -# LIBRARY_PATH; skip all such settings. -ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | - sed '/^Driving:/d; /^Configured with:/d; - '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` -$as_echo "$ac_fc_v_output" >&5 -FCFLAGS=$ac_save_FCFLAGS +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long +_ACEOF -rm -rf conftest* -# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where -# /foo, /bar, and /baz are search directories for the Fortran linker. -# Here, we change these into -L/foo -L/bar -L/baz (and put it first): -ac_fc_v_output="`echo $ac_fc_v_output | - grep 'LPATH is:' | - sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output" +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5 +$as_echo_n "checking size of long long... " >&6; } +if ${ac_cv_sizeof_long_long+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then : -# FIXME: we keep getting bitten by quoted arguments; a more general fix -# that detects unbalanced quotes in FLIBS should be implemented -# and (ugh) tested at some point. -case $ac_fc_v_output in - # With xlf replace commas with spaces, - # and remove "-link" and closing parenthesis. - *xlfentry*) - ac_fc_v_output=`echo $ac_fc_v_output | - sed ' - s/,/ /g - s/ -link / /g - s/) *$// - ' - ` ;; +else + if test "$ac_cv_type_long_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long_long=0 + fi +fi - # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted - # $LIBS confuse us, and the libraries appear later in the output anyway). - *mGLOB_options_string*) - ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5 +$as_echo "$ac_cv_sizeof_long_long" >&6; } - # Portland Group compiler has singly- or doubly-quoted -cmdline argument - # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4. - # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". - *-cmdline\ * | *-ignore\ * | *-def\ *) - ac_fc_v_output=`echo $ac_fc_v_output | sed "\ - s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g - s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g - s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; - # If we are using fort77 (the f2c wrapper) then filter output and delete quotes. - *fort77*f2c*gcc*) - ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n ' - /:[ ]\+Running[ ]\{1,\}"gcc"/{ - /"-c"/d - /[.]c"*/d - s/^.*"gcc"/"gcc"/ - s/"//gp - }'` ;; - # If we are using Cray Fortran then delete quotes. - *cft90*) - ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;; -esac +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long +_ACEOF +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of __int64" >&5 +$as_echo_n "checking size of __int64... " >&6; } +if ${ac_cv_sizeof___int64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (__int64))" "ac_cv_sizeof___int64" "$ac_includes_default"; then : -ac_cv_fc_libs= +else + if test "$ac_cv_type___int64" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (__int64) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof___int64=0 + fi +fi -# Save positional arguments (if any) -ac_save_positional="$@" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof___int64" >&5 +$as_echo "$ac_cv_sizeof___int64" >&6; } -set X $ac_fc_v_output -while test $# != 1; do - shift - ac_arg=$1 - case $ac_arg in - [\\/]*.a | ?:[\\/]*.a) - ac_exists=false - for ac_i in $ac_cv_fc_libs; do - if test x"$ac_arg" = x"$ac_i"; then - ac_exists=true - break - fi - done - if test x"$ac_exists" = xtrue; then : -else - ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" -fi - ;; - -bI:*) - ac_exists=false - for ac_i in $ac_cv_fc_libs; do - if test x"$ac_arg" = x"$ac_i"; then - ac_exists=true - break - fi - done +cat >>confdefs.h <<_ACEOF +#define SIZEOF___INT64 $ac_cv_sizeof___int64 +_ACEOF - if test x"$ac_exists" = xtrue; then : +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of float" >&5 +$as_echo_n "checking size of float... " >&6; } +if ${ac_cv_sizeof_float+:} false; then : + $as_echo_n "(cached) " >&6 else - if test "$ac_compiler_gnu" = yes; then - for ac_link_opt in $ac_arg; do - ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt" - done + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (float))" "ac_cv_sizeof_float" "$ac_includes_default"; then : + else - ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" + if test "$ac_cv_type_float" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (float) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_float=0 + fi fi + fi - ;; - # Ignore these flags. - -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \ - |-LANG:=* | -LIST:* | -LNO:* | -link) - ;; - -lkernel32) - case $host_os in - *cygwin*) ;; - *) ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" - ;; - esac - ;; - -[LRuYz]) - # These flags, when seen by themselves, take an argument. - # We remove the space between option and argument and re-iterate - # unless we find an empty arg or a new option (starting with -) - case $2 in - "" | -*);; - *) - ac_arg="$ac_arg$2" - shift; shift - set X $ac_arg "$@" - ;; - esac - ;; - -YP,*) - for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do - ac_exists=false - for ac_i in $ac_cv_fc_libs; do - if test x"$ac_j" = x"$ac_i"; then - ac_exists=true - break - fi - done +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_float" >&5 +$as_echo "$ac_cv_sizeof_float" >&6; } - if test x"$ac_exists" = xtrue; then : -else - ac_arg="$ac_arg $ac_j" - ac_cv_fc_libs="$ac_cv_fc_libs $ac_j" -fi - done - ;; - -[lLR]*) - ac_exists=false - for ac_i in $ac_cv_fc_libs; do - if test x"$ac_arg" = x"$ac_i"; then - ac_exists=true - break - fi - done - if test x"$ac_exists" = xtrue; then : +cat >>confdefs.h <<_ACEOF +#define SIZEOF_FLOAT $ac_cv_sizeof_float +_ACEOF + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5 +$as_echo_n "checking size of double... " >&6; } +if ${ac_cv_sizeof_double+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" -fi - ;; - -zallextract*| -zdefaultextract) - ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" - ;; - # Ignore everything else. - esac -done -# restore positional arguments -set X $ac_save_positional; shift + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double" "$ac_includes_default"; then : -# We only consider "LD_RUN_PATH" on Solaris systems. If this is seen, -# then we insist that the "run path" must be an absolute path (i.e. it -# must begin with a "/"). -case `(uname -sr) 2>/dev/null` in - "SunOS 5"*) - ac_ld_run_path=`$as_echo "$ac_fc_v_output" | - sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'` - test "x$ac_ld_run_path" != x && - if test "$ac_compiler_gnu" = yes; then - for ac_link_opt in $ac_ld_run_path; do - ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt" - done else - ac_cv_fc_libs="$ac_cv_fc_libs $ac_ld_run_path" + if test "$ac_cv_type_double" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (double) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_double=0 + fi fi - ;; -esac -fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_libs" >&5 -$as_echo "$ac_cv_fc_libs" >&6; } -FCLIBS="$ac_cv_fc_libs" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_double" >&5 +$as_echo "$ac_cv_sizeof_double" >&6; } -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu +cat >>confdefs.h <<_ACEOF +#define SIZEOF_DOUBLE $ac_cv_sizeof_double +_ACEOF -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dummy main to link with Fortran libraries" >&5 -$as_echo_n "checking for dummy main to link with Fortran libraries... " >&6; } -if ${ac_cv_fc_dummy_main+:} false; then : +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long double" >&5 +$as_echo_n "checking size of long double... " >&6; } +if ${ac_cv_sizeof_long_double+:} false; then : $as_echo_n "(cached) " >&6 else - ac_fc_dm_save_LIBS=$LIBS - LIBS="$LIBS $FCLIBS" - ac_fortran_dm_var=FC_DUMMY_MAIN - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long double))" "ac_cv_sizeof_long_double" "$ac_includes_default"; then : - # First, try linking without a dummy main: - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +else + if test "$ac_cv_type_long_double" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long double) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long_double=0 + fi +fi -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_double" >&5 +$as_echo "$ac_cv_sizeof_long_double" >&6; } - ; - return 0; -} + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_fortran_dummy_main=none -else - ac_cv_fortran_dummy_main=unknown -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test $ac_cv_fortran_dummy_main = unknown; then - for ac_func in MAIN__ MAIN_ __main MAIN _MAIN __MAIN main_ main__ _main; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define $ac_fortran_dm_var $ac_func -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_fortran_dummy_main=$ac_func; break + +## Check for non-standard extenstion __FLOAT128 +HAVE_FLOAT128=0 +HAVE_QUADMATH=0 +FLT128_DIG=0 +LDBL_DIG=0 + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of __float128" >&5 +$as_echo_n "checking size of __float128... " >&6; } +if ${ac_cv_sizeof___float128+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (__float128))" "ac_cv_sizeof___float128" "$ac_includes_default"; then : + +else + if test "$ac_cv_type___float128" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (__float128) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof___float128=0 + fi fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - done - fi - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu - ac_cv_fc_dummy_main=$ac_cv_fortran_dummy_main - rm -rf conftest* - LIBS=$ac_fc_dm_save_LIBS fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_dummy_main" >&5 -$as_echo "$ac_cv_fc_dummy_main" >&6; } -FC_DUMMY_MAIN=$ac_cv_fc_dummy_main -if test "$FC_DUMMY_MAIN" != unknown; then : - if test $FC_DUMMY_MAIN != none; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof___float128" >&5 +$as_echo "$ac_cv_sizeof___float128" >&6; } + + cat >>confdefs.h <<_ACEOF -#define FC_DUMMY_MAIN $FC_DUMMY_MAIN +#define SIZEOF___FLOAT128 $ac_cv_sizeof___float128 _ACEOF - if test "x$ac_cv_fc_dummy_main" = "x$ac_cv_f77_dummy_main"; then -$as_echo "#define FC_DUMMY_MAIN_EQ_F77 1" >>confdefs.h +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of _Quad" >&5 +$as_echo_n "checking size of _Quad... " >&6; } +if ${ac_cv_sizeof__Quad+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (_Quad))" "ac_cv_sizeof__Quad" "$ac_includes_default"; then : - fi -fi else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 + if test "$ac_cv_type__Quad" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "linking to Fortran libraries from C fails +as_fn_error 77 "cannot compute sizeof (_Quad) See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof__Quad=0 + fi fi -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof__Quad" >&5 +$as_echo "$ac_cv_sizeof__Quad" >&6; } -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran name-mangling scheme" >&5 -$as_echo_n "checking for Fortran name-mangling scheme... " >&6; } -if ${ac_cv_fc_mangling+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF - subroutine foobar() - return - end - subroutine foo_bar() - return - end -_ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - mv conftest.$ac_objext cfortran_test.$ac_objext - ac_save_LIBS=$LIBS - LIBS="cfortran_test.$ac_objext $LIBS $FCLIBS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - ac_success=no - for ac_foobar in foobar FOOBAR; do - for ac_underscore in "" "_"; do - ac_func="$ac_foobar$ac_underscore" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +cat >>confdefs.h <<_ACEOF +#define SIZEOF__QUAD $ac_cv_sizeof__Quad +_ACEOF -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return $ac_func (); - ; - return 0; -} + +for ac_header in quadmath.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "quadmath.h" "ac_cv_header_quadmath_h" "$ac_includes_default" +if test "x$ac_cv_header_quadmath_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_QUADMATH_H 1 _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_success=yes; break 2 + HAVE_QUADMATH=1 fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - done - done - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu - if test "$ac_success" = "yes"; then - case $ac_foobar in - foobar) - ac_case=lower - ac_foo_bar=foo_bar - ;; - FOOBAR) - ac_case=upper - ac_foo_bar=FOO_BAR - ;; - esac +done - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - ac_success_extra=no - for ac_extra in "" "_"; do - ac_func="$ac_foo_bar$ac_underscore$ac_extra" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking maximum decimal precision for C" >&5 +$as_echo_n "checking maximum decimal precision for C... " >&6; } +rm -f pac_Cconftest.out + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif + + #include + #include + #define CHECK_FLOAT128 $ac_cv_sizeof___float128 + #if CHECK_FLOAT128!=0 + # if $HAVE_QUADMATH!=0 + #include + # endif + # ifdef FLT128_DIG + #define C_FLT128_DIG FLT128_DIG + # else + #define C_FLT128_DIG 0 + # endif + #else + #define C_FLT128_DIG 0 + #endif + #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + #define C_LDBL_DIG DECIMAL_DIG + #else + #define C_LDBL_DIG LDBL_DIG + #endif + int main () { -return $ac_func (); + + FILE * pFile; + pFile = fopen("pac_Cconftest.out","w"); + fprintf(pFile, "%d\n%d\n", C_LDBL_DIG, C_FLT128_DIG); + ; return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_success_extra=yes; break -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - done - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu - - if test "$ac_success_extra" = "yes"; then - ac_cv_fc_mangling="$ac_case case" - if test -z "$ac_underscore"; then - ac_cv_fc_mangling="$ac_cv_fc_mangling, no underscore" - else - ac_cv_fc_mangling="$ac_cv_fc_mangling, underscore" - fi - if test -z "$ac_extra"; then - ac_cv_fc_mangling="$ac_cv_fc_mangling, no extra underscore" - else - ac_cv_fc_mangling="$ac_cv_fc_mangling, extra underscore" - fi - else - ac_cv_fc_mangling="unknown" - fi - else - ac_cv_fc_mangling="unknown" - fi - LIBS=$ac_save_LIBS - rm -rf conftest* - rm -f cfortran_test* -else +_ACEOF + if test "$cross_compiling" = yes; then : { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compile a simple Fortran program +as_fn_error $? "cannot run test program while cross compiling See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + if ac_fn_c_try_run "$LINENO"; then : -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_mangling" >&5 -$as_echo "$ac_cv_fc_mangling" >&6; } + if test -s pac_Cconftest.out ; then + LDBL_DIG="`perl -ne '$. == 1 && print && exit' pac_Cconftest.out`" + FLT128_DIG="`perl -ne '$. == 2 && print && exit' pac_Cconftest.out`" + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: No output from test program!" >&5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_Cconftest.out -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu +else -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -case $ac_cv_fc_mangling in - "lower case, no underscore, no extra underscore") - $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h + as_fn_error $? "C program fails to build or run!" "$LINENO" 5 - $as_echo "#define FC_FUNC_(name,NAME) name" >>confdefs.h - ;; - "lower case, no underscore, extra underscore") - $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam +fi - $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h - ;; - "lower case, underscore, no extra underscore") - $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h - $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h - ;; - "lower case, underscore, extra underscore") - $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h - - $as_echo "#define FC_FUNC_(name,NAME) name ## __" >>confdefs.h - ;; - "upper case, no underscore, no extra underscore") - $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h - - $as_echo "#define FC_FUNC_(name,NAME) NAME" >>confdefs.h - ;; - "upper case, no underscore, extra underscore") - $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h - - $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h - ;; - "upper case, underscore, no extra underscore") - $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h - - $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h - ;; - "upper case, underscore, extra underscore") - $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h - - $as_echo "#define FC_FUNC_(name,NAME) NAME ## __" >>confdefs.h - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unknown Fortran name-mangling scheme" >&5 -$as_echo "$as_me: WARNING: unknown Fortran name-mangling scheme" >&2;} - ;; -esac -ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu - - - ## -------------------------------------------------------------------- - ## See if the fortran compiler supports the intrinsic function "SIZEOF" +if test "$ac_cv_sizeof___float128" != 0 && test "$FLT128_DIG" != 0 ; then - HAVE_SIZEOF_FORTRAN="no" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic SIZEOF" >&5 -$as_echo_n "checking if Fortran compiler supports intrinsic SIZEOF... " >&6; } - cat > conftest.$ac_ext <<_ACEOF - - PROGRAM main - i = sizeof(x) - END PROGRAM +$as_echo "#define HAVE_FLOAT128 1" >>confdefs.h -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - HAVE_SIZEOF_FORTRAN="yes" + PAC_C_MAX_REAL_PRECISION=$FLT128_DIG else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + PAC_C_MAX_REAL_PRECISION=$LDBL_DIG fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - - - ## See if the fortran compiler supports the intrinsic function "C_SIZEOF" - - HAVE_C_SIZEOF_FORTRAN="no" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic C_SIZEOF" >&5 -$as_echo_n "checking if Fortran compiler supports intrinsic C_SIZEOF... " >&6; } - cat > conftest.$ac_ext <<_ACEOF - - PROGRAM main - USE ISO_C_BINDING - INTEGER(C_INT) :: a - INTEGER(C_SIZE_T) :: result - result = C_SIZEOF(a) - END PROGRAM +cat >>confdefs.h <<_ACEOF +#define PAC_C_MAX_REAL_PRECISION $PAC_C_MAX_REAL_PRECISION _ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - HAVE_C_SIZEOF_FORTRAN="yes" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - - - ## See if the fortran compiler supports the intrinsic function "STORAGE_SIZE" - - HAVE_STORAGE_SIZE_FORTRAN="no" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic STORAGE_SIZE" >&5 -$as_echo_n "checking if Fortran compiler supports intrinsic STORAGE_SIZE... " >&6; } - cat > conftest.$ac_ext <<_ACEOF - - PROGRAM main - INTEGER :: a - INTEGER :: result - result = STORAGE_SIZE(a) - END PROGRAM -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - HAVE_STORAGE_SIZE_FORTRAN="yes" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_C_MAX_REAL_PRECISION" >&5 +$as_echo "$PAC_C_MAX_REAL_PRECISION" >&6; } +## ---------------------------------------------------------------------- +## Check if they would like the Fortran interface compiled +## + HDF5_INTERFACES="" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran interface enabled" >&5 +$as_echo_n "checking if Fortran interface enabled... " >&6; } +# Check whether --enable-fortran was given. +if test "${enable_fortran+set}" = set; then : + enableval=$enable_fortran; HDF_FORTRAN=$enableval fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - - - - ## Check to see if -r8 was specified to determine if we need to - ## compile the DOUBLE PRECISION interfaces. - - FORTRAN_DEFAULT_REALisDBLE="no" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran default REAL is DOUBLE PRECISION" >&5 -$as_echo_n "checking if Fortran default REAL is DOUBLE PRECISION... " >&6; } - cat > conftest.$ac_ext <<_ACEOF - - MODULE type_mod - INTERFACE h5t - MODULE PROCEDURE h5t_real - MODULE PROCEDURE h5t_dble - END INTERFACE - CONTAINS - SUBROUTINE h5t_real(r) - REAL :: r - END SUBROUTINE h5t_real - SUBROUTINE h5t_dble(d) - DOUBLE PRECISION :: d - END SUBROUTINE h5t_dble - END MODULE type_mod - PROGRAM main - USE type_mod - REAL :: r - DOUBLE PRECISION :: d - CALL h5t(r) - CALL h5t(d) - END PROGRAM main -_ACEOF -if ac_fn_fc_try_compile "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +if test "X$HDF_FORTRAN" = "Xyes"; then + echo "yes" else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - FORTRAN_DEFAULT_REALisDBLE="yes" + echo "no" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - - - if test "X$HDF_FORTRAN2003" = "Xyes"; then - ## Checking if the compiler supports the required Fortran 2003 features and - ## disable Fortran 2003 if it does not. - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler version compatible with Fortran 2003 HDF" >&5 -$as_echo_n "checking if Fortran compiler version compatible with Fortran 2003 HDF... " >&6; } - HAVE_FORTRAN_2003="no" - HAVE_F2003_REQUIREMENTS="no" - cat > conftest.$ac_ext <<_ACEOF - program main - - - USE iso_c_binding - IMPLICIT NONE - TYPE(C_PTR) :: ptr - TYPE(C_FUNPTR) :: funptr - CHARACTER(LEN=80, KIND=c_char), TARGET :: ichr +if test "X$HDF_FORTRAN" = "Xyes"; then - ptr = C_LOC(ichr(1:1)) +## We will output an include file for Fortran, H5config_f.inc which +## contains various configure definitions used by the Fortran Library. +## Prepend H5_ to all macro names. This avoids name conflict between HDF5 macro +## names and those generated by another software package that uses the HDF5 library. + ac_config_headers="$ac_config_headers fortran/src/H5config_f.inc" - end -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - HAVE_F2003_REQUIREMENTS=yes -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + HDF_FORTRAN=yes + HDF5_INTERFACES="$HDF5_INTERFACES fortran" - if test "X$HAVE_F2003_REQUIREMENTS" = "Xno"; then - as_fn_error $? "Fortran compiler lacks required Fortran 2003 features; unsupported Fortran 2003 compiler, remove --enable-fortran2003" "$LINENO" 5 - else - HAVE_FORTRAN_2003="yes" - fi - fi -else - FC="no" -fi + ## -------------------------------------------------------------------- + ## HDF5 integer variables for the H5fortran_types.f90 file. + ## -## Change back to the C language -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes"; then - FORTRAN_HAVE_SIZEOF_TRUE= - FORTRAN_HAVE_SIZEOF_FALSE='#' -else - FORTRAN_HAVE_SIZEOF_TRUE='#' - FORTRAN_HAVE_SIZEOF_FALSE= -fi - if test "X$HAVE_C_SIZEOF_FORTRAN" = "Xyes"; then - FORTRAN_HAVE_C_SIZEOF_TRUE= - FORTRAN_HAVE_C_SIZEOF_FALSE='#' -else - FORTRAN_HAVE_C_SIZEOF_TRUE='#' - FORTRAN_HAVE_C_SIZEOF_FALSE= -fi - if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes"; then - FORTRAN_HAVE_STORAGE_SIZE_TRUE= - FORTRAN_HAVE_STORAGE_SIZE_FALSE='#' -else - FORTRAN_HAVE_STORAGE_SIZE_TRUE='#' - FORTRAN_HAVE_STORAGE_SIZE_FALSE= -fi - if test "X$HAVE_FORTRAN_2003" = "Xyes"; then - FORTRAN_2003_CONDITIONAL_F_TRUE= - FORTRAN_2003_CONDITIONAL_F_FALSE='#' -else - FORTRAN_2003_CONDITIONAL_F_TRUE='#' - FORTRAN_2003_CONDITIONAL_F_FALSE= -fi - if test "X$FORTRAN_DEFAULT_REALisDBLE" = "Xyes"; then - FORTRAN_DEFAULT_REALisDBLE_F_TRUE= - FORTRAN_DEFAULT_REALisDBLE_F_FALSE='#' -else - FORTRAN_DEFAULT_REALisDBLE_F_TRUE='#' - FORTRAN_DEFAULT_REALisDBLE_F_FALSE= -fi -## ---------------------------------------------------------------------- -## Check if they would like the C++ interface compiled -## -## We need to check for a C++ compiler unconditionally, since -## AC_PROG_CXX defines some macros that Automake 1.9.x uses and will -## miss even if c++ is not enabled. - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + ## -------------------------------------------------------------------- + ## Fortran source extention + ## + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CXX+:} false; then : +if ${ac_cv_prog_FC+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. + if test -n "$FC"; then + ac_cv_prog_FC="$FC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -6705,7 +6388,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + ac_cv_prog_FC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -6715,32 +6398,32 @@ IFS=$as_save_IFS fi fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 -$as_echo "$CXX" >&6; } +FC=$ac_cv_prog_FC +if test -n "$FC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5 +$as_echo "$FC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$CXX" && break + test -n "$FC" && break done fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +if test -z "$FC"; then + ac_ct_FC=$FC + for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn nagfor xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CXX+:} false; then : +if ${ac_cv_prog_ac_ct_FC+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. + if test -n "$ac_ct_FC"; then + ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -6749,7 +6432,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" + ac_cv_prog_ac_ct_FC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -6759,21 +6442,21 @@ IFS=$as_save_IFS fi fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } +ac_ct_FC=$ac_cv_prog_ac_ct_FC +if test -n "$ac_ct_FC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5 +$as_echo "$ac_ct_FC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$ac_ct_CXX" && break + test -n "$ac_ct_FC" && break done - if test "x$ac_ct_CXX" = x; then - CXX="g++" + if test "x$ac_ct_FC" = x; then + FC="" else case $cross_compiling:$ac_tool_warned in yes:) @@ -6781,14 +6464,13 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - CXX=$ac_ct_CXX + FC=$ac_ct_FC fi fi - fi -fi + # Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do @@ -6811,153 +6493,136 @@ $as_echo "$ac_try_echo"; } >&5 $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done +rm -f a.out -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if ${ac_cv_cxx_compiler_gnu+:} false; then : +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5 +$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } +if ${ac_cv_fc_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + cat > conftest.$ac_ext <<_ACEOF + program main #ifndef __GNUC__ choke me #endif - ; - return 0; -} + end _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +if ac_fn_fc_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu +ac_cv_fc_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if ${ac_cv_prog_cxx_g+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5 +$as_echo "$ac_cv_fc_compiler_gnu" >&6; } +ac_ext=$ac_save_ext +ac_test_FCFLAGS=${FCFLAGS+set} +ac_save_FCFLAGS=$FCFLAGS +FCFLAGS= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5 +$as_echo_n "checking whether $FC accepts -g... " >&6; } +if ${ac_cv_prog_fc_g+:} false; then : $as_echo_n "(cached) " >&6 else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + FCFLAGS=-g +cat > conftest.$ac_ext <<_ACEOF + program main - ; - return 0; -} + end _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes +if ac_fn_fc_try_compile "$LINENO"; then : + ac_cv_prog_fc_g=yes else - CXXFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + ac_cv_prog_fc_g=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5 +$as_echo "$ac_cv_prog_fc_g" >&6; } +if test "$ac_test_FCFLAGS" = set; then + FCFLAGS=$ac_save_FCFLAGS +elif test $ac_cv_prog_fc_g = yes; then + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-g -O2" + else + FCFLAGS="-g" + fi +else + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-O2" + else + FCFLAGS= + fi +fi +if test $ac_compiler_gnu = yes; then + GFC=yes else - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + GFC= +fi +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran flag to compile .f90 files" >&5 +$as_echo_n "checking for Fortran flag to compile .f90 files... " >&6; } +if ${ac_cv_fc_srcext_f90+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=f90 +ac_fcflags_srcext_save=$ac_fcflags_srcext +ac_fcflags_srcext= +ac_cv_fc_srcext_f90=unknown +case $ac_ext in #( + [fF]77) ac_try=f77;; #( + *) ac_try=f95;; +esac +for ac_flag in none -qsuffix=f=f90 -Tf "-x $ac_try"; do + test "x$ac_flag" != xnone && ac_fcflags_srcext="$ac_flag" + cat > conftest.$ac_ext <<_ACEOF + program main + + end _ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if ac_fn_fc_try_compile "$LINENO"; then : + ac_cv_fc_srcext_f90=$ac_flag; break fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag +done +rm -f conftest.$ac_objext conftest.f90 +ac_fcflags_srcext=$ac_fcflags_srcext_save + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_srcext_f90" >&5 +$as_echo "$ac_cv_fc_srcext_f90" >&6; } +if test "x$ac_cv_fc_srcext_f90" = xunknown; then + as_fn_error $? "Fortran could not compile .f90 files" "$LINENO" 5 else - if test "$GXX" = yes; then - CXXFLAGS="-O2" + ac_fc_srcext=f90 + if test "x$ac_cv_fc_srcext_f90" = xnone; then + ac_fcflags_srcext="" + FCFLAGS_f90="" else - CXXFLAGS= + ac_fcflags_srcext=$ac_cv_fc_srcext_f90 + FCFLAGS_f90=$ac_cv_fc_srcext_f90 fi + + fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -6965,389 +6630,348 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -depcc="$CXX" am_compiler_list= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CXX_dependencies_compiler_type+:} false; then : + + + + ## -------------------------------------------------------------------- + ## Check for a Fortran compiler and how to include modules. + ## + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in gfortran ifort pgf90 pathf90 pathf95 xlf90 xlf95 xlf2003 f90 epcf90 f95 fort lf95 g95 ifc efc gfc + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_FC+:} false; then : $as_echo_n "(cached) " >&6 else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + if test -n "$FC"; then + ac_cv_prog_FC="$FC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_FC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CXX_dependencies_compiler_type=$depmode - break - fi - fi +done done +IFS=$as_save_IFS - cd .. - rm -rf conftest.dir -else - am_cv_CXX_dependencies_compiler_type=none fi - fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then - am__fastdepCXX_TRUE= - am__fastdepCXX_FALSE='#' +FC=$ac_cv_prog_FC +if test -n "$FC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5 +$as_echo "$FC" >&6; } else - am__fastdepCXX_TRUE='#' - am__fastdepCXX_FALSE= + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if ${ac_cv_prog_CXXCPP+:} false; then : + test -n "$FC" && break + done +fi +if test -z "$FC"; then + ac_ct_FC=$FC + for ac_prog in gfortran ifort pgf90 pathf90 pathf95 xlf90 xlf95 xlf2003 f90 epcf90 f95 fort lf95 g95 ifc efc gfc +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_FC+:} false; then : $as_echo_n "(cached) " >&6 else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes + if test -n "$ac_ct_FC"; then + ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_FC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -else - # Broken: fails on valid input. -continue fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue +fi +ac_ct_FC=$ac_cv_prog_ac_ct_FC +if test -n "$ac_ct_FC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5 +$as_echo "$ac_ct_FC" >&6; } else - # Passes both tests. -ac_preproc_ok=: -break + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.i conftest.$ac_ext + + test -n "$ac_ct_FC" && break done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break + + if test "x$ac_ct_FC" = x; then + FC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + FC=$ac_ct_FC + fi fi - done - ac_cv_prog_CXXCPP=$CXXCPP -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done +rm -f a.out + +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5 +$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; } +if ${ac_cv_fc_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat > conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me #endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : + end +_ACEOF +if ac_fn_fc_try_compile "$LINENO"; then : + ac_compiler_gnu=yes else - # Broken: fails on valid input. -continue + ac_compiler_gnu=no fi -rm -f conftest.err conftest.i conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_fc_compiler_gnu=$ac_compiler_gnu - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5 +$as_echo "$ac_cv_fc_compiler_gnu" >&6; } +ac_ext=$ac_save_ext +ac_test_FCFLAGS=${FCFLAGS+set} +ac_save_FCFLAGS=$FCFLAGS +FCFLAGS= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5 +$as_echo_n "checking whether $FC accepts -g... " >&6; } +if ${ac_cv_prog_fc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + FCFLAGS=-g +cat > conftest.$ac_ext <<_ACEOF + program main + + end _ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue +if ac_fn_fc_try_compile "$LINENO"; then : + ac_cv_prog_fc_g=yes else - # Passes both tests. -ac_preproc_ok=: -break + ac_cv_prog_fc_g=no fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5 +$as_echo "$ac_cv_prog_fc_g" >&6; } +if test "$ac_test_FCFLAGS" = set; then + FCFLAGS=$ac_save_FCFLAGS +elif test $ac_cv_prog_fc_g = yes; then + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-g -O2" + else + FCFLAGS="-g" + fi else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } + if test "x$ac_cv_fc_compiler_gnu" = xyes; then + FCFLAGS="-O2" + else + FCFLAGS= + fi fi +if test $ac_compiler_gnu = yes; then + GFC=yes +else + GFC= +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - ## this is checked for when AC_HEADER_STDC is done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if c++ interface enabled" >&5 -$as_echo_n "checking if c++ interface enabled... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking what $FC does with modules" >&5 +$as_echo_n "checking what $FC does with modules... " >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -# Check whether --enable-cxx was given. -if test "${enable_cxx+set}" = set; then : - enableval=$enable_cxx; HDF_CXX=$enableval -fi +test -d conftestdir || mkdir conftestdir +cd conftestdir +rm -rf * -if test "X$HDF_CXX" = "Xyes"; then - echo "yes" - HDF5_INTERFACES="$HDF5_INTERFACES c++" +cat >conftest.$ac_ext <&1 +if test "$modfiles" = file.o; then + echo $ac_n "checking whether $FC -em is saner""... $ac_c" 1>&6 + OLD_FCFLAGS=$FCFLAGS + FCFLAGS="$FCFLAGS -em" + eval $ac_compile + modfiles="" + for f in file.o module.mod MODULE.mod module.M MODULE.M; do + test -f $f && modfiles="$f" + done + if test "$modfiles" = "file.o"; then + FCFLAGS=$OLD_FCFLAGS + echo no 6>&1 + else + echo yes 6>&1 + fi +fi +cd .. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX needs old style header files in includes" >&5 -$as_echo_n "checking if $CXX needs old style header files in includes... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how $FC finds modules" >&5 +$as_echo_n "checking how $FC finds modules... " >&6; } -#include +for flag in "-I" "-M" "-p"; do + cat >conftest.$ac_ext <&5 -$as_echo "no" >&6; } + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + F9XMODFLAG=$flag + break + fi +done + +if test -n "$F9XMODFLAG"; then + echo $F9XMODFLAG 1>&6 + FCFLAGS="$F9XMODFLAG. $FCFLAGS" else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" - AM_CXXFLAGS="${AM_CXXFLAGS} -DOLD_HEADER_FILENAME" + echo unknown 1>&6 fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - # Checking if C++ can handle namespaces - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX can handle namespaces" >&5 -$as_echo_n "checking if $CXX can handle namespaces... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +rm -rf conftest* +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -namespace H5 { -int fnord; -} -int main(void) { - using namespace H5; - fnord = 37; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" - AM_CXXFLAGS="${AM_CXXFLAGS} -DH5_NO_NAMESPACE" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + ## Change to the Fortran 90 language + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu - # Checking if C++ has offsetof extension + ## Checking if the compiler supports the required Fortran 2003 features and + ## stopping if it does not. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX has offsetof extension" >&5 -$as_echo_n "checking if $CXX has offsetof extension... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler version compatible with Fortran 2003 HDF" >&5 +$as_echo_n "checking if Fortran compiler version compatible with Fortran 2003 HDF... " >&6; } + HAVE_F2003_REQUIREMENTS="no" + cat > conftest.$ac_ext <<_ACEOF + program main - #include - #include -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + USE iso_c_binding + IMPLICIT NONE + TYPE(C_PTR) :: ptr + TYPE(C_FUNPTR) :: funptr + CHARACTER(LEN=80, KIND=c_char), TARGET :: ichr - struct index_st - { - unsigned char type; - unsigned char num; - unsigned int len; - }; - typedef struct index_st index_t; - int x,y; - x = offsetof(struct index_st, len); - y = offsetof(index_t, num) + ptr = C_LOC(ichr(1:1)) - ; - return 0; -} + + end _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : +if ac_fn_fc_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } - -$as_echo "#define CXX_HAVE_OFFSETOF 1" >>confdefs.h - + HAVE_F2003_REQUIREMENTS=yes else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } @@ -7356,1452 +6980,1542 @@ rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - # if C++ can handle static cast - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX can handle static cast" >&5 -$as_echo_n "checking if $CXX can handle static cast... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int main(void) { - float test_float; - int test_int; - test_float = 37.0; - test_int = static_cast (test_float); - return 0; -} + if test "X$HAVE_F2003_REQUIREMENTS" = "Xno"; then + as_fn_error $? "Fortran compiler lacks required Fortran 2003 features; unsupported Fortran 2003 compiler, remove --enable-fortran" "$LINENO" 5 + fi -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } + ## -------------------------------------------------------------------- + ## Define wrappers for the C compiler to use Fortran function names + ## + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $FC" >&5 +$as_echo_n "checking how to get verbose linking output from $FC... " >&6; } +if ${ac_cv_prog_fc_v+:} false; then : + $as_echo_n "(cached) " >&6 else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" - AM_CXXFLAGS="${AM_CXXFLAGS} -DNO_STATIC_CAST" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext + cat > conftest.$ac_ext <<_ACEOF + program main + end +_ACEOF +if ac_fn_fc_try_compile "$LINENO"; then : + ac_cv_prog_fc_v= +# Try some options frequently used verbose output +for ac_verb in -v -verbose --verbose -V -\#\#\#; do + cat > conftest.$ac_ext <<_ACEOF + program main -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - CXX="no" -fi + end +_ACEOF -## Change back to the C language -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +# Compile and link our simple test program by passing a flag (argument +# 1 to this macro) to the Fortran compiler in order to get +# "verbose" output that we can then parse for the Fortran linker +# flags. +ac_save_FCFLAGS=$FCFLAGS +FCFLAGS="$FCFLAGS $ac_verb" +eval "set x $ac_link" +shift +$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 +# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, +# LIBRARY_PATH; skip all such settings. +ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | + sed '/^Driving:/d; /^Configured with:/d; + '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` +$as_echo "$ac_fc_v_output" >&5 +FCFLAGS=$ac_save_FCFLAGS +rm -rf conftest* +# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where +# /foo, /bar, and /baz are search directories for the Fortran linker. +# Here, we change these into -L/foo -L/bar -L/baz (and put it first): +ac_fc_v_output="`echo $ac_fc_v_output | + grep 'LPATH is:' | + sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output" -## ---------------------------------------------------------------------- -## Check if they would like the High Level library compiled -## +# FIXME: we keep getting bitten by quoted arguments; a more general fix +# that detects unbalanced quotes in FLIBS should be implemented +# and (ugh) tested at some point. +case $ac_fc_v_output in + # With xlf replace commas with spaces, + # and remove "-link" and closing parenthesis. + *xlfentry*) + ac_fc_v_output=`echo $ac_fc_v_output | + sed ' + s/,/ /g + s/ -link / /g + s/) *$// + ' + ` ;; - HL="" -## name of fortran folder inside "hl", if FORTRAN compile is requested - HL_FOR="" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if high level library is enabled" >&5 -$as_echo_n "checking if high level library is enabled... " >&6; } -# Check whether --enable-hl was given. -if test "${enable_hl+set}" = set; then : - enableval=$enable_hl; HDF5_HL=$enableval -else - HDF5_HL=yes -fi + # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted + # $LIBS confuse us, and the libraries appear later in the output anyway). + *mGLOB_options_string*) + ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;; + # Portland Group compiler has singly- or doubly-quoted -cmdline argument + # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4. + # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". + *-cmdline\ * | *-ignore\ * | *-def\ *) + ac_fc_v_output=`echo $ac_fc_v_output | sed "\ + s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g + s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g + s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; -if test "X$HDF5_HL" = "Xyes"; then - echo "yes" - HL="hl" + # If we are using fort77 (the f2c wrapper) then filter output and delete quotes. + *fort77*f2c*gcc*) + ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n ' + /:[ ]\+Running[ ]\{1,\}"gcc"/{ + /"-c"/d + /[.]c"*/d + s/^.*"gcc"/"gcc"/ + s/"//gp + }'` ;; -$as_echo "#define INCLUDE_HL 1" >>confdefs.h + # If we are using Cray Fortran then delete quotes. + *cft90*) + ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;; +esac - ## If Fortran's default real is double precision and HL is being built then configure - ## should fail due to bug HDFFV-889. - if test "X$FORTRAN_DEFAULT_REALisDBLE" = "Xyes"; then - as_fn_error $? "Fortran high-level routines are not supported when the default REAL is DOUBLE PRECISION, use configure option --disable-hl." "$LINENO" 5 - fi + # look for -l* and *.a constructs in the output + for ac_arg in $ac_fc_v_output; do + case $ac_arg in + [\\/]*.a | ?:[\\/]*.a | -[lLRu]*) + ac_cv_prog_fc_v=$ac_verb + break 2 ;; + esac + done +done +if test -z "$ac_cv_prog_fc_v"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $FC" >&5 +$as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $FC" >&2;} +fi else - echo "no" + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5 +$as_echo "$as_me: WARNING: compilation failed" >&2;} fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -## ---------------------------------------------------------------------- -## Check if they have Perl installed on their system. We only need Perl -## if they're using a GNU compiler. -## - PERL="" -if test "X$GCC" = "Xyes"; then - for ac_prog in perl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_PERL+:} false; then : +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_v" >&5 +$as_echo "$ac_cv_prog_fc_v" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran libraries of $FC" >&5 +$as_echo_n "checking for Fortran libraries of $FC... " >&6; } +if ${ac_cv_fc_libs+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$PERL"; then - ac_cv_prog_PERL="$PERL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_PERL="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -PERL=$ac_cv_prog_PERL -if test -n "$PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5 -$as_echo "$PERL" >&6; } + if test "x$FCLIBS" != "x"; then + ac_cv_fc_libs="$FCLIBS" # Let the user override the test. else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +cat > conftest.$ac_ext <<_ACEOF + program main - test -n "$PERL" && break -done + end +_ACEOF -fi - -## ---------------------------------------------------------------------- -## Check which archiving tool to use. This needs to be done before -## the AM_PROG_LIBTOOL macro. -## - -if test -z "$AR"; then - for ac_prog in ar xar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +# Compile and link our simple test program by passing a flag (argument +# 1 to this macro) to the Fortran compiler in order to get +# "verbose" output that we can then parse for the Fortran linker +# flags. +ac_save_FCFLAGS=$FCFLAGS +FCFLAGS="$FCFLAGS $ac_cv_prog_fc_v" +eval "set x $ac_link" +shift +$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5 +# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH, +# LIBRARY_PATH; skip all such settings. +ac_fc_v_output=`eval $ac_link 5>&1 2>&1 | + sed '/^Driving:/d; /^Configured with:/d; + '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"` +$as_echo "$ac_fc_v_output" >&5 +FCFLAGS=$ac_save_FCFLAGS -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +rm -rf conftest* +# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where +# /foo, /bar, and /baz are search directories for the Fortran linker. +# Here, we change these into -L/foo -L/bar -L/baz (and put it first): +ac_fc_v_output="`echo $ac_fc_v_output | + grep 'LPATH is:' | + sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output" - test -n "$AR" && break -done -test -n "$AR" || AR=":" +# FIXME: we keep getting bitten by quoted arguments; a more general fix +# that detects unbalanced quotes in FLIBS should be implemented +# and (ugh) tested at some point. +case $ac_fc_v_output in + # With xlf replace commas with spaces, + # and remove "-link" and closing parenthesis. + *xlfentry*) + ac_fc_v_output=`echo $ac_fc_v_output | + sed ' + s/,/ /g + s/ -link / /g + s/) *$// + ' + ` ;; -fi + # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted + # $LIBS confuse us, and the libraries appear later in the output anyway). + *mGLOB_options_string*) + ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;; + # Portland Group compiler has singly- or doubly-quoted -cmdline argument + # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4. + # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2". + *-cmdline\ * | *-ignore\ * | *-def\ *) + ac_fc_v_output=`echo $ac_fc_v_output | sed "\ + s/-cmdline *'[^']*'/ /g; s/-cmdline *\"[^\"]*\"/ /g + s/-ignore *'[^']*'/ /g; s/-ignore *\"[^\"]*\"/ /g + s/-def *'[^']*'/ /g; s/-def *\"[^\"]*\"/ /g"` ;; -## Export the AR macro so that it will be placed in the libtool file -## correctly. -export AR + # If we are using fort77 (the f2c wrapper) then filter output and delete quotes. + *fort77*f2c*gcc*) + ac_fc_v_output=`echo "$ac_fc_v_output" | sed -n ' + /:[ ]\+Running[ ]\{1,\}"gcc"/{ + /"-c"/d + /[.]c"*/d + s/^.*"gcc"/"gcc"/ + s/"//gp + }'` ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; + # If we are using Cray Fortran then delete quotes. + *cft90*) + ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;; esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi +ac_cv_fc_libs= -## ---------------------------------------------------------------------- -## Set up ${TR} which is used to process DEBUG_PKG. +# Save positional arguments (if any) +ac_save_positional="$@" -# Extract the first word of "tr", so it can be a program name with args. -set dummy tr; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_TR+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $TR in - [\\/]* | ?:[\\/]*) - ac_cv_path_TR="$TR" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done +set X $ac_fc_v_output +while test $# != 1; do + shift + ac_arg=$1 + case $ac_arg in + [\\/]*.a | ?:[\\/]*.a) + ac_exists=false + for ac_i in $ac_cv_fc_libs; do + if test x"$ac_arg" = x"$ac_i"; then + ac_exists=true + break + fi done -IFS=$as_save_IFS - ;; -esac -fi -TR=$ac_cv_path_TR -if test -n "$TR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5 -$as_echo "$TR" >&6; } + if test x"$ac_exists" = xtrue; then : + else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" fi + ;; + -bI:*) + ac_exists=false + for ac_i in $ac_cv_fc_libs; do + if test x"$ac_arg" = x"$ac_i"; then + ac_exists=true + break + fi + done + if test x"$ac_exists" = xtrue; then : - - -## ---------------------------------------------------------------------- -## Check that time can be used with srcdir. This is okay on most systems, -## but seems to cause problems on Cygwin. -## The solution on Cygwin is not to record execution time for tests. -## -## Note: This is still true as of Cygwin 1.7.32 (Aug 2014) on both 32- -## and 64-bit platforms. Given how long this has been true, it seems -## unlikely to change, but we should probably re-test this periodically. - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if srcdir= and time commands work together" >&5 -$as_echo_n "checking if srcdir= and time commands work together... " >&6; } - - -TIME=time -TIME_TEST=`foo="bar" ${TIME} echo 'baz' 2> /dev/null | grep baz` - -if test "X${TIME_TEST}" = "Xbaz"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - TIME= + if test "$ac_compiler_gnu" = yes; then + for ac_link_opt in $ac_arg; do + ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt" + done +else + ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" fi +fi + ;; + # Ignore these flags. + -lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \ + |-LANG:=* | -LIST:* | -LNO:* | -link) + ;; + -lkernel32) + case $host_os in + *cygwin*) ;; + *) ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" + ;; + esac + ;; + -[LRuYz]) + # These flags, when seen by themselves, take an argument. + # We remove the space between option and argument and re-iterate + # unless we find an empty arg or a new option (starting with -) + case $2 in + "" | -*);; + *) + ac_arg="$ac_arg$2" + shift; shift + set X $ac_arg "$@" + ;; + esac + ;; + -YP,*) + for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do + ac_exists=false + for ac_i in $ac_cv_fc_libs; do + if test x"$ac_j" = x"$ac_i"; then + ac_exists=true + break + fi + done + if test x"$ac_exists" = xtrue; then : -## The following variables are used to distinguish between building a -## serial and parallel library. -## -## HAVE_PARALLEL -- defined in H5config.h if we are building -## a parallel library even if configure wasn't -## able to find some header file or library that -## might be required. This is defined if the -## user explicitly states -## that a parallel library is being built by supplying -## the `--enable-parallel' configure switch. -## -## PARALLEL -- This variable is set to a non-null value if -## we're building a parallel version of the library. -## -## RUNSERIAL -- This is a command which will be prepended to -## the executable name to run the executable using -## a single process. For serial versions of the -## library this will normally be empty. For parallel -## versions it might be something like `mpiexec -n 1'. -## The value of this variable is substituted in *.in -## files. -## -## RUNPARALLEL -- This is a command which will be prepended to -## the executable name to run the executable on -## multiple processors. For the serial library the -## value will normally be the empty string. For -## parallel library it should be something like -## "mpiexec -n \$\${NPROCS:=6}" where NPROCS will -## eventually contain the number of processors on which -## to run the executable (the double dollarsigns are to -## protect the expansion until make executes the -## command). The value of this variable is -## substituted in *.in files. -## - - - - +else + ac_arg="$ac_arg $ac_j" + ac_cv_fc_libs="$ac_cv_fc_libs $ac_j" +fi + done + ;; + -[lLR]*) + ac_exists=false + for ac_i in $ac_cv_fc_libs; do + if test x"$ac_arg" = x"$ac_i"; then + ac_exists=true + break + fi + done -## ---------------------------------------------------------------------- -## Disable shared libraries on CYGWIN. (LK - 04/16/15) -## A number of tests run by "make check" fail on CYGWIN, so for HDF5 v1.8.15 -## we will change the default for shared libraries to disabled. + if test x"$ac_exists" = xtrue; then : +else + ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" +fi + ;; + -zallextract*| -zdefaultextract) + ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg" + ;; + # Ignore everything else. + esac +done +# restore positional arguments +set X $ac_save_positional; shift -case "`uname`" in - CYGWIN*) - enable_shared="no" - CHECK_WARN="Shared libraries are not currently supported on CYGWIN." - ;; +# We only consider "LD_RUN_PATH" on Solaris systems. If this is seen, +# then we insist that the "run path" must be an absolute path (i.e. it +# must begin with a "/"). +case `(uname -sr) 2>/dev/null` in + "SunOS 5"*) + ac_ld_run_path=`$as_echo "$ac_fc_v_output" | + sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'` + test "x$ac_ld_run_path" != x && + if test "$ac_compiler_gnu" = yes; then + for ac_link_opt in $ac_ld_run_path; do + ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt" + done +else + ac_cv_fc_libs="$ac_cv_fc_libs $ac_ld_run_path" +fi + ;; esac +fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x" -## ---------------------------------------------------------------------- -## Fortran libraries are not currently supported on Mac. Disable them. -## (this is overridable with --enable-unsupported). -## +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_libs" >&5 +$as_echo "$ac_cv_fc_libs" >&6; } +FCLIBS="$ac_cv_fc_libs" -H5_FORTRAN_SHARED="no" -if test "X${HDF_FORTRAN}" = "Xyes" && test "X${enable_shared}" != "Xno"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if shared Fortran libraries are supported" >&5 -$as_echo_n "checking if shared Fortran libraries are supported... " >&6; } - H5_FORTRAN_SHARED="yes" - ## Disable fortran shared libraries on Mac. (MAM - 03/30/11) +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu - case "`uname`" in - Darwin*) - H5_FORTRAN_SHARED="no" - CHECK_WARN="Shared Fortran libraries not currently supported on Mac." - ;; - esac +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu - ## Report results of check(s) +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dummy main to link with Fortran libraries" >&5 +$as_echo_n "checking for dummy main to link with Fortran libraries... " >&6; } +if ${ac_cv_fc_dummy_main+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_fc_dm_save_LIBS=$LIBS + LIBS="$LIBS $FCLIBS" + ac_fortran_dm_var=FC_DUMMY_MAIN + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - if test "X${H5_FORTRAN_SHARED}" = "Xno"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $CHECK_WARN" >&5 -$as_echo "$as_me: WARNING: $CHECK_WARN" >&2;} - if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling shared Fortran libraries." >&5 -$as_echo "$as_me: WARNING: Disabling shared Fortran libraries." >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: To override this behavior, please use --enable-unsupported configure option." >&5 -$as_echo "$as_me: WARNING: To override this behavior, please use --enable-unsupported configure option." >&2;} - if test "X${enable_static}" = "Xno"; then - as_fn_error $? "both static and shared Fortran libraries are disabled" "$LINENO" 5 - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Allowing unsupported Fortran shared libraries due to use of --enable-unsupported flag" >&5 -$as_echo "$as_me: WARNING: Allowing unsupported Fortran shared libraries due to use of --enable-unsupported flag" >&2;} - H5_FORTRAN_SHARED="yes" - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - fi -fi + # First, try linking without a dummy main: + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - if test "X$H5_FORTRAN_SHARED" = "Xyes"; then - FORTRAN_SHARED_CONDITIONAL_TRUE= - FORTRAN_SHARED_CONDITIONAL_FALSE='#' +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_fortran_dummy_main=none else - FORTRAN_SHARED_CONDITIONAL_TRUE='#' - FORTRAN_SHARED_CONDITIONAL_FALSE= + ac_cv_fortran_dummy_main=unknown fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test $ac_cv_fortran_dummy_main = unknown; then + for ac_func in MAIN__ MAIN_ __main MAIN _MAIN __MAIN main_ main__ _main; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define $ac_fortran_dm_var $ac_func +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -## ---------------------------------------------------------------------- -## Create libtool. If shared/static libraries are going to be enabled -## or disabled, it should happen before these macros. - - -## ---------------------------------------------------------------------- -## dlopen - This will use an improved version of libtool -## win32-dll - This will build clean dlls on win32 platforms. -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.2' -macro_revision='1.3337' - - - - - + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_fortran_dummy_main=$ac_func; break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + fi + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + ac_cv_fc_dummy_main=$ac_cv_fortran_dummy_main + rm -rf conftest* + LIBS=$ac_fc_dm_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_dummy_main" >&5 +$as_echo "$ac_cv_fc_dummy_main" >&6; } +FC_DUMMY_MAIN=$ac_cv_fc_dummy_main +if test "$FC_DUMMY_MAIN" != unknown; then : + if test $FC_DUMMY_MAIN != none; then +cat >>confdefs.h <<_ACEOF +#define FC_DUMMY_MAIN $FC_DUMMY_MAIN +_ACEOF + if test "x$ac_cv_fc_dummy_main" = "x$ac_cv_f77_dummy_main"; then +$as_echo "#define FC_DUMMY_MAIN_EQ_F77 1" >>confdefs.h + fi +fi +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "linking to Fortran libraries from C fails +See \`config.log' for more details" "$LINENO" 5; } +fi +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran name-mangling scheme" >&5 +$as_echo_n "checking for Fortran name-mangling scheme... " >&6; } +if ${ac_cv_fc_mangling+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat > conftest.$ac_ext <<_ACEOF + subroutine foobar() + return + end + subroutine foo_bar() + return + end +_ACEOF +if ac_fn_fc_try_compile "$LINENO"; then : + mv conftest.$ac_objext cfortran_test.$ac_objext -ltmain="$ac_aux_dir/ltmain.sh" + ac_save_LIBS=$LIBS + LIBS="cfortran_test.$ac_objext $LIBS $FCLIBS" -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + ac_success=no + for ac_foobar in foobar FOOBAR; do + for ac_underscore in "" "_"; do + ac_func="$ac_foobar$ac_underscore" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_success=yes; break 2 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + done + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + if test "$ac_success" = "yes"; then + case $ac_foobar in + foobar) + ac_case=lower + ac_foo_bar=foo_bar + ;; + FOOBAR) + ac_case=upper + ac_foo_bar=FOO_BAR + ;; + esac -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + ac_success_extra=no + for ac_extra in "" "_"; do + ac_func="$ac_foo_bar$ac_underscore$ac_extra" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_success_extra=yes; break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + if test "$ac_success_extra" = "yes"; then + ac_cv_fc_mangling="$ac_case case" + if test -z "$ac_underscore"; then + ac_cv_fc_mangling="$ac_cv_fc_mangling, no underscore" + else + ac_cv_fc_mangling="$ac_cv_fc_mangling, underscore" + fi + if test -z "$ac_extra"; then + ac_cv_fc_mangling="$ac_cv_fc_mangling, no extra underscore" + else + ac_cv_fc_mangling="$ac_cv_fc_mangling, extra underscore" + fi + else + ac_cv_fc_mangling="unknown" + fi + else + ac_cv_fc_mangling="unknown" + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' + LIBS=$ac_save_LIBS + rm -rf conftest* + rm -f cfortran_test* else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compile a simple Fortran program +See \`config.log' for more details" "$LINENO" 5; } fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_mangling" >&5 +$as_echo "$ac_cv_fc_mangling" >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +case $ac_cv_fc_mangling in + "lower case, no underscore, no extra underscore") + $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) name" >>confdefs.h + ;; + "lower case, no underscore, extra underscore") + $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h + ;; + "lower case, underscore, no extra underscore") + $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h + ;; + "lower case, underscore, extra underscore") + $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) name ## __" >>confdefs.h + ;; + "upper case, no underscore, no extra underscore") + $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) NAME" >>confdefs.h + ;; + "upper case, no underscore, extra underscore") + $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h + ;; + "upper case, underscore, no extra underscore") + $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h + ;; + "upper case, underscore, extra underscore") + $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h + $as_echo "#define FC_FUNC_(name,NAME) NAME ## __" >>confdefs.h + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unknown Fortran name-mangling scheme" >&5 +$as_echo "$as_me: WARNING: unknown Fortran name-mangling scheme" >&2;} + ;; +esac +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac + ## -------------------------------------------------------------------- + ## See if the fortran compiler supports the intrinsic function "SIZEOF" - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi + HAVE_SIZEOF_FORTRAN="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic SIZEOF" >&5 +$as_echo_n "checking if Fortran compiler supports intrinsic SIZEOF... " >&6; } + cat > conftest.$ac_ext <<_ACEOF + + PROGRAM main + i = sizeof(x) + END PROGRAM + +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + HAVE_SIZEOF_FORTRAN="yes" else - ac_cv_path_SED=$SED + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" + ## See if the fortran compiler supports the intrinsic function "C_SIZEOF" + HAVE_C_SIZEOF_FORTRAN="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic C_SIZEOF" >&5 +$as_echo_n "checking if Fortran compiler supports intrinsic C_SIZEOF... " >&6; } + cat > conftest.$ac_ext <<_ACEOF + PROGRAM main + USE ISO_C_BINDING + INTEGER(C_INT) :: a + INTEGER(C_SIZE_T) :: result + result = C_SIZEOF(a) + END PROGRAM +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + HAVE_C_SIZEOF_FORTRAN="yes" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ## See if the fortran compiler supports the intrinsic function "STORAGE_SIZE" + HAVE_STORAGE_SIZE_FORTRAN="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic STORAGE_SIZE" >&5 +$as_echo_n "checking if Fortran compiler supports intrinsic STORAGE_SIZE... " >&6; } + cat > conftest.$ac_ext <<_ACEOF + PROGRAM main + INTEGER :: a + INTEGER :: result + result = STORAGE_SIZE(a) + END PROGRAM +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + HAVE_STORAGE_SIZE_FORTRAN="yes" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count + ## Set the sizeof function for use later in the fortran tests + if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes";then + FC_SIZEOF_A="STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + FC_SIZEOF_B="STORAGE_SIZE(b, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + FC_SIZEOF_C="STORAGE_SIZE(c, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + else + if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes";then + FC_SIZEOF_A="SIZEOF(a)" + FC_SIZEOF_B="SIZEOF(b)" + FC_SIZEOF_C="SIZEOF(c)" + else + ## If neither intrinsic functions SIZEOF or STORAGE_SIZE is available then stop configure with an error + as_fn_error $? "Fortran compiler requires either intrinsic functions SIZEOF or STORAGE_SIZE" "$LINENO" 5 fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi + + ## See if the fortran compiler supports the intrinsic module "ISO_FORTRAN_ENV" + + HAVE_ISO_FORTRAN_ENV="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic module ISO_FORTRAN_ENV" >&5 +$as_echo_n "checking if Fortran compiler supports intrinsic module ISO_FORTRAN_ENV... " >&6; } + cat > conftest.$ac_ext <<_ACEOF + + PROGRAM main + USE, INTRINSIC :: ISO_FORTRAN_ENV + END PROGRAM + +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + HAVE_ISO_FORTRAN_ENV="yes" else - ac_cv_path_GREP=$GREP + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" + ## Check KIND and size of native integer +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 +rm -f pac_fconftest.out + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac + cat > conftest.$ac_ext <<_ACEOF - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" + PROGRAM main + IMPLICIT NONE + INTEGER :: ik, k, lastkind, max_decimal_prec + INTEGER :: num_rkinds, num_ikinds + num_ikinds = 0 + lastkind=SELECTED_INT_KIND(1) + OPEN(8, FILE='pac_fconftest.out', form='formatted') + ! Find integer KINDs + DO ik=2,36 + k = SELECTED_INT_KIND(ik) + IF (k .NE. lastkind) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + ! Find real KINDs + num_rkinds = 0 + lastkind=SELECTED_REAL_KIND(1) + max_decimal_prec = 1 + DO ik=2,36 + k = SELECTED_REAL_KIND(ik) + IF (k .NE. lastkind) THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + max_decimal_prec = ik + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1)THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + WRITE(8,'(I0)') max_decimal_prec + WRITE(8,'(I0)') num_ikinds + WRITE(8,'(I0)') num_rkinds + END + + +_ACEOF +if ac_fn_fc_try_run "$LINENO"; then : + + if test -s pac_fconftest.out ; then + + + pac_validIntKinds="`perl -ne '$. == 1 && print && exit' pac_fconftest.out`" + pac_validRealKinds="`perl -ne '$. == 2 && print && exit' pac_fconftest.out`" + PAC_FC_MAX_REAL_PRECISION="`perl -ne '$. == 3 && print && exit' pac_fconftest.out`" +cat >>confdefs.h <<_ACEOF +#define PAC_FC_MAX_REAL_PRECISION $PAC_FC_MAX_REAL_PRECISION +_ACEOF -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi + PAC_FC_ALL_INTEGER_KINDS="{`echo $pac_validIntKinds`}" + PAC_FC_ALL_REAL_KINDS="{`echo $pac_validRealKinds`}" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" + H5CONFIG_F_NUM_IKIND="INTEGER, PARAMETER :: num_ikinds = `perl -ne '$. == 4 && print && exit' pac_fconftest.out`" + H5CONFIG_F_IKIND="INTEGER, DIMENSION(1:num_ikinds) :: ikind = (/`echo $pac_validIntKinds`/)" + H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `perl -ne '$. == 5 && print && exit' pac_fconftest.out`" + H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo $pac_validRealKinds`/)" -test -z "$GREP" && GREP=grep +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_NUM_RKIND $H5CONFIG_F_NUM_RKIND +_ACEOF +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_NUM_IKIND $H5CONFIG_F_NUM_IKIND +_ACEOF +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_RKIND $H5CONFIG_F_RKIND +_ACEOF +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_IKIND $H5CONFIG_F_IKIND +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran INTEGER KINDs" >&5 +$as_echo_n "checking for Fortran INTEGER KINDs... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_INTEGER_KINDS" >&5 +$as_echo "$PAC_FC_ALL_INTEGER_KINDS" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran REAL KINDs" >&5 +$as_echo_n "checking for Fortran REAL KINDs... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_REAL_KINDS" >&5 +$as_echo "$PAC_FC_ALL_REAL_KINDS" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran REALs maximum decimal precision" >&5 +$as_echo_n "checking for Fortran REALs maximum decimal precision... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_MAX_REAL_PRECISION" >&5 +$as_echo "$PAC_FC_MAX_REAL_PRECISION" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Error" >&5 +$as_echo "Error" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: No output from test program!" >&5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_fconftest.out +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Error" >&5 +$as_echo "Error" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed to run program to determine available KINDs" >&5 +$as_echo "$as_me: WARNING: Failed to run program to determine available KINDs" >&2;} +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sizeof of native KINDS" >&5 +$as_echo_n "checking sizeof of native KINDS... " >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu +pack_int_sizeof="" +rm -f pac_fconftest.out + cat > conftest.$ac_ext <<_ACEOF + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER a + REAL b + DOUBLE PRECISION c + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,*) $FC_SIZEOF_A + WRITE(8,*) kind(a) + WRITE(8,*) $FC_SIZEOF_B + WRITE(8,*) kind(b) + WRITE(8,*) $FC_SIZEOF_C + WRITE(8,*) kind(c) + CLOSE(8) + END -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 +_ACEOF + if test "$cross_compiling" = yes; then : + + pack_int_sizeof="" + else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_fconftest.out + else - lt_cv_path_LD="$LD" # Let the user override the test with a path. + + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Fortran program fails to build or run!" >&5 +$as_echo "$as_me: WARNING: Fortran program fails to build or run!" >&2;} + fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam fi -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $pack_int_sizeof" >&5 +$as_echo "$pack_int_sizeof" >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + + + + ## Find all available KINDs + +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + +rm -f pac_fconftest.out + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld + cat > conftest.$ac_ext <<_ACEOF + PROGRAM main + IMPLICIT NONE + INTEGER :: ik, k, lastkind, max_decimal_prec + INTEGER :: num_rkinds, num_ikinds + num_ikinds = 0 + lastkind=SELECTED_INT_KIND(1) + OPEN(8, FILE='pac_fconftest.out', form='formatted') + ! Find integer KINDs + DO ik=2,36 + k = SELECTED_INT_KIND(ik) + IF (k .NE. lastkind) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + ! Find real KINDs + num_rkinds = 0 + lastkind=SELECTED_REAL_KIND(1) + max_decimal_prec = 1 + DO ik=2,36 + k = SELECTED_REAL_KIND(ik) + IF (k .NE. lastkind) THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + max_decimal_prec = ik + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1)THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + WRITE(8,'(I0)') max_decimal_prec + WRITE(8,'(I0)') num_ikinds + WRITE(8,'(I0)') num_rkinds + END + + +_ACEOF +if ac_fn_fc_try_run "$LINENO"; then : + + if test -s pac_fconftest.out ; then + + + pac_validIntKinds="`perl -ne '$. == 1 && print && exit' pac_fconftest.out`" + pac_validRealKinds="`perl -ne '$. == 2 && print && exit' pac_fconftest.out`" + PAC_FC_MAX_REAL_PRECISION="`perl -ne '$. == 3 && print && exit' pac_fconftest.out`" +cat >>confdefs.h <<_ACEOF +#define PAC_FC_MAX_REAL_PRECISION $PAC_FC_MAX_REAL_PRECISION +_ACEOF + PAC_FC_ALL_INTEGER_KINDS="{`echo $pac_validIntKinds`}" + PAC_FC_ALL_REAL_KINDS="{`echo $pac_validRealKinds`}" + H5CONFIG_F_NUM_IKIND="INTEGER, PARAMETER :: num_ikinds = `perl -ne '$. == 4 && print && exit' pac_fconftest.out`" + H5CONFIG_F_IKIND="INTEGER, DIMENSION(1:num_ikinds) :: ikind = (/`echo $pac_validIntKinds`/)" + H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `perl -ne '$. == 5 && print && exit' pac_fconftest.out`" + H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo $pac_validRealKinds`/)" +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_NUM_RKIND $H5CONFIG_F_NUM_RKIND +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_NUM_IKIND $H5CONFIG_F_NUM_IKIND +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_RKIND $H5CONFIG_F_RKIND +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_IKIND $H5CONFIG_F_IKIND +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran INTEGER KINDs" >&5 +$as_echo_n "checking for Fortran INTEGER KINDs... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_INTEGER_KINDS" >&5 +$as_echo "$PAC_FC_ALL_INTEGER_KINDS" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran REAL KINDs" >&5 +$as_echo_n "checking for Fortran REAL KINDs... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_REAL_KINDS" >&5 +$as_echo "$PAC_FC_ALL_REAL_KINDS" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran REALs maximum decimal precision" >&5 +$as_echo_n "checking for Fortran REALs maximum decimal precision... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_MAX_REAL_PRECISION" >&5 +$as_echo "$PAC_FC_MAX_REAL_PRECISION" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Error" >&5 +$as_echo "Error" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: No output from test program!" >&5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_fconftest.out -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Error" >&5 +$as_echo "Error" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed to run program to determine available KINDs" >&5 +$as_echo "$as_me: WARNING: Failed to run program to determine available KINDs" >&2;} + fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 + + +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + + + ## Find all sizeofs for available KINDs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sizeof of available INTEGER KINDs" >&5 +$as_echo_n "checking sizeof of available INTEGER KINDs... " >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + +pack_int_sizeof="" +rm -f pac_fconftest.out + +for kind in `echo $pac_validIntKinds | perl -pe 's/,/ /g'`; do + cat > conftest.$ac_ext <<_ACEOF + + + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER (KIND=$kind) a + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,'(I0)') $FC_SIZEOF_A + CLOSE(8) + END + + +_ACEOF + if test "$cross_compiling" = yes; then : + + pack_int_sizeof="" + else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. + if ac_fn_fc_try_run "$LINENO"; then : + + if test -s pac_fconftest.out ; then + sizes="`cat pac_fconftest.out`" + pack_int_sizeof="$pack_int_sizeof $sizes," + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: No output from test program!" >&5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_fconftest.out + else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Fortran program fails to build or run!" >&5 +$as_echo "$as_me: WARNING: Fortran program fails to build or run!" >&2;} fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam fi +done +PAC_FC_ALL_INTEGER_KINDS_SIZEOF="{`echo $pack_int_sizeof | perl -pe 's/,$//' | perl -pe 's/ //g'`}" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_INTEGER_KINDS_SIZEOF" >&5 +$as_echo "$PAC_FC_ALL_INTEGER_KINDS_SIZEOF" >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sizeof of available REAL KINDs" >&5 +$as_echo_n "checking sizeof of available REAL KINDs... " >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + +pack_real_sizeof="" +rm -f pac_fconftest.out +for kind in `echo $pac_validRealKinds| perl -pe 's/,/ /g'`; do + cat > conftest.$ac_ext <<_ACEOF + + + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + REAL (KIND=$kind) :: a + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,'(I0)') $FC_SIZEOF_A + CLOSE(8) + END + + +_ACEOF + if test "$cross_compiling" = yes; then : + + pack_real_sizeof="" - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. + if ac_fn_fc_try_run "$LINENO"; then : + + if test -s pac_fconftest.out ; then + sizes="`cat pac_fconftest.out`" + pack_real_sizeof="$pack_real_sizeof $sizes," + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: No output from test program!" >&5 +$as_echo "$as_me: WARNING: No output from test program!" >&2;} + fi + rm -f pac_fconftest.out + else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Fortran program fails to build or run!" >&5 +$as_echo "$as_me: WARNING: Fortran program fails to build or run!" >&2;} fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - test -n "$ac_ct_DUMPBIN" && break done +PAC_FC_ALL_REAL_KINDS_SIZEOF="{`echo $pack_real_sizeof | perl -pe 's/,$//' | perl -pe 's/ //g'`}" +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_REAL_KINDS_SIZEOF" >&5 +$as_echo "$PAC_FC_ALL_REAL_KINDS_SIZEOF" >&6; } +ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + ## Setting definition if there is a 16 byte fortran integer + if `echo $PAC_FC_ALL_INTEGER_KINDS_SIZEOF | grep '16' >/dev/null`; then + HAVE_Fortran_INTEGER_SIZEOF_16="1" + +$as_echo "#define HAVE_Fortran_INTEGER_SIZEOF_16 1" >>confdefs.h - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi + HAVE_Fortran_INTEGER_SIZEOF_16="0" + +$as_echo "#define HAVE_Fortran_INTEGER_SIZEOF_16 0" >>confdefs.h - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac fi - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" + if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes"; then + +$as_echo "#define FORTRAN_HAVE_STORAGE_SIZE 1" >>confdefs.h + fi -fi -test -z "$NM" && NM=nm + if test "X$HAVE_C_SIZEOF_FORTRAN" = "Xyes"; then +$as_echo "#define FORTRAN_HAVE_C_SIZEOF 1" >>confdefs.h + fi + if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes"; then +$as_echo "#define FORTRAN_HAVE_SIZEOF 1" >>confdefs.h -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then + ## See if C_LONG_DOUBLE is available + + HAVE_C_LONG_DOUBLE_FORTRAN="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran compiler supports intrinsic C_LONG_DOUBLE" >&5 +$as_echo_n "checking if Fortran compiler supports intrinsic C_LONG_DOUBLE... " >&6; } + cat > conftest.$ac_ext <<_ACEOF + + PROGRAM main + USE ISO_C_BINDING + REAL(KIND=C_LONG_DOUBLE) :: d + END PROGRAM + +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } + HAVE_C_LONG_DOUBLE_FORTRAN="yes" else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; + FORTRAN_HAVE_C_LONG_DOUBLE="0" + if test "X$HAVE_C_LONG_DOUBLE_FORTRAN" = "Xyes"; then + FORTRAN_HAVE_C_LONG_DOUBLE="1" - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; +$as_echo "#define FORTRAN_HAVE_C_LONG_DOUBLE 1" >>confdefs.h - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; + fi - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; + ## Is C_LONG_DOUBLE different from C_DOUBLE + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0" + if test "X$FORTRAN_HAVE_C_LONG_DOUBLE"; then - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; + C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Fortran C_LONG_DOUBLE is different from C_DOUBLE" >&5 +$as_echo_n "checking if Fortran C_LONG_DOUBLE is different from C_DOUBLE... " >&6; } - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac + cat > conftest.$ac_ext <<_ACEOF -fi + MODULE type_mod + USE ISO_C_BINDING + INTERFACE h5t + MODULE PROCEDURE h5t_c_double + MODULE PROCEDURE h5t_c_long_double + END INTERFACE + CONTAINS + SUBROUTINE h5t_c_double(r) + REAL(KIND=C_DOUBLE) :: r + END SUBROUTINE h5t_c_double + SUBROUTINE h5t_c_long_double(d) + REAL(KIND=C_LONG_DOUBLE) :: d + END SUBROUTINE h5t_c_long_double + END MODULE type_mod + PROGRAM main + USE ISO_C_BINDING + USE type_mod + REAL(KIND=C_DOUBLE) :: r + REAL(KIND=C_LONG_DOUBLE) :: d + CALL h5t(r) + CALL h5t(d) + END PROGRAM main -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +_ACEOF +if ac_fn_fc_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="yes" else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} + if test "X$C_LONG_DOUBLE_IS_UNIQUE_FORTRAN" = "Xyes"; then + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="1" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } +$as_echo "#define FORTRAN_C_LONG_DOUBLE_IS_UNIQUE 1" >>confdefs.h + else + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0" + fi + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } + FORTRAN_SIZEOF_LONG_DOUBLE=${ac_cv_sizeof_long_double} +cat >>confdefs.h <<_ACEOF +#define FORTRAN_SIZEOF_LONG_DOUBLE "${ac_cv_sizeof_long_double}" +_ACEOF -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi + max_real_fortran_sizeof="`echo \"$PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -ne '/,(\d+)\}/; print $1'`" + max_real_fortran_kind="`echo \"$PAC_FC_ALL_REAL_KINDS\" | perl -ne '/,(\d+)\}/; print $1'`" + if test "$ac_cv_sizeof___float128" != 0;then + if test "$ac_cv_sizeof___float128" != "$max_real_fortran_sizeof" && test "${ac_cv_sizeof_long_double}" != "$max_real_fortran_sizeof"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: + Fortran REAL(KIND=$max_real_fortran_kind) is $max_real_fortran_sizeof Bytes, but no corresponding C float type exists of that size + !!! Fortran interfaces will not be generated for REAL(KIND=$max_real_fortran_kind) !!! + " >&5 +$as_echo "$as_me: WARNING: + Fortran REAL(KIND=$max_real_fortran_kind) is $max_real_fortran_sizeof Bytes, but no corresponding C float type exists of that size + !!! Fortran interfaces will not be generated for REAL(KIND=$max_real_fortran_kind) !!! + " >&2;} + PAC_FC_ALL_REAL_KINDS="`echo \"$PAC_FC_ALL_REAL_KINDS\" | perl -pe 's/,\d+}/}/g;'`" + PAC_FC_ALL_REAL_KINDS_SIZEOF="`echo \"$PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -pe 's/,\d+}/}/g;'`" + fi + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran interoperable KINDS with C" >&5 +$as_echo_n "checking for Fortran interoperable KINDS with C... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PAC_FC_ALL_REAL_KINDS" >&5 +$as_echo "$PAC_FC_ALL_REAL_KINDS" >&6; } -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac + H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `echo \"$PAC_FC_ALL_REAL_KINDS\" | perl -e '$count = ( =~ tr/,//);print $count+1'`" + H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo \"$PAC_FC_ALL_REAL_KINDS\" | perl -pe 's/{//g' | perl -pe 's/}//g' | perl -pe 's/ /,/g'`/)" + H5CONFIG_F_RKIND_SIZEOF="INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/`echo \"$PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -pe 's/{//g' | perl -pe 's/}//g'| perl -pe 's/ /,/g'`/)" +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_NUM_RKIND $H5CONFIG_F_NUM_RKIND +_ACEOF +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_RKIND $H5CONFIG_F_RKIND +_ACEOF +cat >>confdefs.h <<_ACEOF +#define H5CONFIG_F_RKIND_SIZEOF $H5CONFIG_F_RKIND_SIZEOF +_ACEOF +## Change back to the C language + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' + FC="no" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 +## ---------------------------------------------------------------------- +## Check if they would like the C++ interface compiled +## +## We need to check for a C++ compiler unconditionally, since +## AC_PROG_CXX defines some macros that Automake 1.9.x uses and will +## miss even if c++ is not enabled. + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : +if ${ac_cv_prog_CXX+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -8810,7 +8524,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -8820,28 +8534,32 @@ IFS=$as_save_IFS fi fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 +$as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + test -n "$CXX" && break + done fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : +if ${ac_cv_prog_ac_ct_CXX+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -8850,7 +8568,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" + ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -8860,17 +8578,21 @@ IFS=$as_save_IFS fi fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) @@ -8878,529 +8600,540 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - OBJDUMP=$ac_ct_OBJDUMP + CXX=$ac_ct_CXX fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" fi -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if ${ac_cv_cxx_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if ${ac_cv_prog_cxx_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -beos*) - lt_cv_deplibs_check_method=pass_all - ;; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +else + CXXFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; +else + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + ac_cv_prog_cxx_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" else - lt_cv_deplibs_check_method=pass_all + CXXFLAGS="-g" fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + CXXFLAGS= fi - ;; +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; +depcc="$CXX" am_compiler_list= -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CXX_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi + done + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' +else + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= +fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if ${ac_cv_prog_CXXCPP+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.i conftest.$ac_ext - + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi +rm -f conftest.err conftest.i conftest.$ac_ext + done - done -IFS=$as_save_IFS +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.i conftest.$ac_ext - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue else - DLLTOOL="$ac_cv_prog_DLLTOOL" + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.i conftest.$ac_ext -test -z "$DLLTOOL" && DLLTOOL=dlltool +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + ## this is checked for when AC_HEADER_STDC is done +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if c++ interface enabled" >&5 +$as_echo_n "checking if c++ interface enabled... " >&6; } +# Check whether --enable-cxx was given. +if test "${enable_cxx+set}" = set; then : + enableval=$enable_cxx; HDF_CXX=$enableval +fi +if test "X$HDF_CXX" = "Xyes"; then + echo "yes" + HDF5_INTERFACES="$HDF5_INTERFACES c++" + ## Change to the C++ language + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + # Checking if C++ needs old style header files in includes -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX needs old style header files in includes" >&5 +$as_echo_n "checking if $CXX needs old style header files in includes... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO +#include +int main(void) { return 0; } +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + CXXFLAGS="${CXXFLAGS} -DOLD_HEADER_FILENAME" + AM_CXXFLAGS="${AM_CXXFLAGS} -DOLD_HEADER_FILENAME" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + # Checking if C++ can handle namespaces + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX can handle namespaces" >&5 +$as_echo_n "checking if $CXX can handle namespaces... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +namespace H5 { +int fnord; +} -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS +int main(void) { + using namespace H5; + fnord = 37; + return 0; +} -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } + CXXFLAGS="${CXXFLAGS} -DH5_NO_NAMESPACE" + AM_CXXFLAGS="${AM_CXXFLAGS} -DH5_NO_NAMESPACE" fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + # Checking if C++ has offsetof extension -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX has offsetof extension" >&5 +$as_echo_n "checking if $CXX has offsetof extension... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ + #include + #include + #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -9413,160 +9146,124 @@ int main () { + struct index_st + { + unsigned char type; + unsigned char num; + unsigned int len; + }; + typedef struct index_st index_t; + int x,y; + x = offsetof(struct index_st, len); + y = offsetof(index_t, num) + ; return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +if ac_fn_cxx_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } +$as_echo "#define CXX_HAVE_OFFSETOF 1" >>confdefs.h -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= else - archiver_list_spec=$lt_cv_ar_at_file + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + # if C++ can handle static cast + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CXX can handle static cast" >&5 +$as_echo_n "checking if $CXX can handle static cast... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void) { + float test_float; + int test_int; + test_float = 37.0; + test_int = static_cast (test_float); + return 0; +} - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } + CXXFLAGS="${CXXFLAGS} -DNO_STATIC_CAST" + AM_CXXFLAGS="${AM_CXXFLAGS} -DNO_STATIC_CAST" fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } + CXX="no" fi - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi +## Change back to the C language +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +## ---------------------------------------------------------------------- +## Check if they would like the High Level library compiled +## + + HL="" +## name of fortran folder inside "hl", if FORTRAN compile is requested + HL_FOR="" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if high level library is enabled" >&5 +$as_echo_n "checking if high level library is enabled... " >&6; } +# Check whether --enable-hl was given. +if test "${enable_hl+set}" = set; then : + enableval=$enable_hl; HDF5_HL=$enableval else - STRIP="$ac_cv_prog_STRIP" + HDF5_HL=yes fi -test -z "$STRIP" && STRIP=: +if test "X$HDF5_HL" = "Xyes"; then + echo "yes" + HL="hl" +$as_echo "#define INCLUDE_HL 1" >>confdefs.h +else + echo "no" +fi +## ---------------------------------------------------------------------- +## Check which archiving tool to use. This needs to be done before +## the AM_PROG_LIBTOOL macro. +## -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +if test -z "$AR"; then + for ac_prog in ar xar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : +if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -9575,7 +9272,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + ac_cv_prog_AR="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -9585,37 +9282,84 @@ IFS=$as_save_IFS fi fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + test -n "$AR" && break +done +test -n "$AR" || AR=":" + fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 + + +## Export the AR macro so that it will be placed in the libtool file +## correctly. +export AR + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + + + +## ---------------------------------------------------------------------- +## Set up ${TR} which is used to process DEBUG_PKG. + +# Extract the first word of "tr", so it can be a program name with args. +set dummy tr; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : +if ${ac_cv_path_TR+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + case $TR in + [\\/]* | ?:[\\/]*) + ac_cv_path_TR="$TR" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" + ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -9623,84 +9367,172 @@ done done IFS=$as_save_IFS + ;; +esac fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } +TR=$ac_cv_path_TR +if test -n "$TR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5 +$as_echo "$TR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: +## ---------------------------------------------------------------------- +## Check that time can be used with srcdir. This is okay on most systems, +## but seems to cause problems on Cygwin. +## The solution on Cygwin is not to record execution time for tests. +## +## Note: This is still true as of Cygwin 1.7.32 (Aug 2014) on both 32- +## and 64-bit platforms. Given how long this has been true, it seems +## unlikely to change, but we should probably re-test this periodically. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if srcdir= and time commands work together" >&5 +$as_echo_n "checking if srcdir= and time commands work together... " >&6; } -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= +TIME=time +TIME_TEST=`foo="bar" ${TIME} echo 'baz' 2> /dev/null | grep baz` -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +if test "X${TIME_TEST}" = "Xbaz"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + TIME= fi -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac +## The following variables are used to distinguish between building a +## serial and parallel library. +## +## HAVE_PARALLEL -- defined in H5config.h if we are building +## a parallel library even if configure wasn't +## able to find some header file or library that +## might be required. This is defined if the +## user explicitly states +## that a parallel library is being built by supplying +## the `--enable-parallel' configure switch. +## +## PARALLEL -- This variable is set to a non-null value if +## we're building a parallel version of the library. +## +## RUNSERIAL -- This is a command which will be prepended to +## the executable name to run the executable using +## a single process. For serial versions of the +## library this will normally be empty. For parallel +## versions it might be something like `mpiexec -n 1'. +## The value of this variable is substituted in *.in +## files. +## +## RUNPARALLEL -- This is a command which will be prepended to +## the executable name to run the executable on +## multiple processors. For the serial library the +## value will normally be the empty string. For +## parallel library it should be something like +## "mpiexec -n \$\${NPROCS:=6}" where NPROCS will +## eventually contain the number of processors on which +## to run the executable (the double dollarsigns are to +## protect the expansion until make executes the +## command). The value of this variable is +## substituted in *.in files. +## +## ---------------------------------------------------------------------- +## Disable shared libraries on CYGWIN. (LK - 04/16/15) +## A number of tests run by "make check" fail on CYGWIN, so for HDF5 v1.8.15 +## we will change the default for shared libraries to disabled. +case "`uname`" in + CYGWIN*) + enable_shared="no" + CHECK_WARN="Shared libraries are not currently supported on CYGWIN." + ;; +esac +## ---------------------------------------------------------------------- +## Fortran libraries are not currently supported on Mac. Disable them. +## (this is overridable with --enable-unsupported). +## +H5_FORTRAN_SHARED="no" +if test "X${HDF_FORTRAN}" = "Xyes" && test "X${enable_shared}" != "Xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if shared Fortran libraries are supported" >&5 +$as_echo_n "checking if shared Fortran libraries are supported... " >&6; } + H5_FORTRAN_SHARED="yes" + ## Disable fortran shared libraries on Mac. (MAM - 03/30/11) + case "`uname`" in + Darwin*) + H5_FORTRAN_SHARED="no" + CHECK_WARN="Shared Fortran libraries not currently supported on Mac." + ;; + esac + ## Report results of check(s) + if test "X${H5_FORTRAN_SHARED}" = "Xno"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $CHECK_WARN" >&5 +$as_echo "$as_me: WARNING: $CHECK_WARN" >&2;} + if test "X${ALLOW_UNSUPPORTED}" != "Xyes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling shared Fortran libraries." >&5 +$as_echo "$as_me: WARNING: Disabling shared Fortran libraries." >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: To override this behavior, please use --enable-unsupported configure option." >&5 +$as_echo "$as_me: WARNING: To override this behavior, please use --enable-unsupported configure option." >&2;} + if test "X${enable_static}" = "Xno"; then + as_fn_error $? "both static and shared Fortran libraries are disabled" "$LINENO" 5 + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Allowing unsupported Fortran shared libraries due to use of --enable-unsupported flag" >&5 +$as_echo "$as_me: WARNING: Allowing unsupported Fortran shared libraries due to use of --enable-unsupported flag" >&2;} + H5_FORTRAN_SHARED="yes" + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + fi +fi + if test "X$H5_FORTRAN_SHARED" = "Xyes"; then + FORTRAN_SHARED_CONDITIONAL_TRUE= + FORTRAN_SHARED_CONDITIONAL_FALSE='#' +else + FORTRAN_SHARED_CONDITIONAL_TRUE='#' + FORTRAN_SHARED_CONDITIONAL_FALSE= +fi +## ---------------------------------------------------------------------- +## Create libtool. If shared/static libraries are going to be enabled +## or disabled, it should happen before these macros. +## ---------------------------------------------------------------------- +## dlopen - This will use an improved version of libtool +## win32-dll - This will build clean dlls on win32 platforms. +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac +macro_version='2.4.2' +macro_revision='1.3337' @@ -9714,277 +9546,227 @@ esac +ltmain="$ac_aux_dir/ltmain.sh" +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - # Check to see that the pipe works correctly. - pipe_works=no - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif -#ifdef __cplusplus -extern "C" { -#endif +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi - cat <<_LT_EOF >> conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -fi -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" +test -z "$GREP" && GREP=grep @@ -10003,387 +9785,188 @@ fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else - with_sysroot=no + with_gnu_ld=no fi - -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; esac fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes + done + IFS="$lt_save_ifs" else - lt_cv_cc_needs_belf=no + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +LD="$lt_cv_path_LD" +if test -n "$LD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD="${LD-ld}_sol2" - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* +*) + lt_cv_prog_gnu_ld=no ;; esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld -need_locks="$enable_libtool_lock" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" fi -done + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" done -IFS=$as_save_IFS - + : ${lt_cv_path_NM=no} fi fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : +if ${ac_cv_prog_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -10392,7 +9975,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -10402,28 +9985,32 @@ IFS=$as_save_IFS fi fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + test -n "$DUMPBIN" && break + done fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -10432,7 +10019,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -10442,17 +10029,21 @@ IFS=$as_save_IFS fi fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) @@ -10460,390 +10051,259 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - DSYMUTIL=$ac_ct_DSYMUTIL + DUMPBIN=$ac_ct_DUMPBIN fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac fi -done - done -IFS=$as_save_IFS + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi +test -z "$NM" && NM=nm -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } + rm -f conftest* fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - LIPO="$ac_cv_prog_LIPO" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } fi - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + i=0 + teststring="ABCD" -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } else - OTOOL64="$ac_cv_prog_OTOOL64" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac @@ -10853,523 +10313,445 @@ fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +fi +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test $_lt_result -eq 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - + lt_cv_ld_reload_flag='-r' fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else - _lt_dsymutil= + reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; - esac +esac -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : $as_echo_n "(cached) " >&6 else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -else - # Broken: fails on valid input. -continue fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - done - ac_cv_prog_CPP=$CPP fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -else - # Broken: fails on valid input. -continue fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } else - # Passes both tests. -ac_preproc_ok=: -break + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } + OBJDUMP="$ac_cv_prog_OBJDUMP" fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include +test -z "$OBJDUMP" && OBJDUMP=objdump -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : -else - ac_cv_header_stdc=no -fi -rm -f conftest* -fi -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : +beos*) + lt_cv_deplibs_check_method=pass_all + ;; -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; -fi +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; -done +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; esac -} # func_stripname_cnf - + ;; +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; -# Set options -enable_dlopen=yes +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; - enable_win32_dll=no +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi @@ -11380,30 +10762,8 @@ fi -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for lt_pkg in $withval; do - IFS="$lt_save_ifs" - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - pic_mode=default -fi -test -z "$pic_mode" && pic_mode=default @@ -11411,51 +10771,99 @@ test -z "$pic_mode" && pic_mode=default - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi +test -z "$DLLTOOL" && DLLTOOL=dlltool @@ -11466,8 +10874,37 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO @@ -11475,15 +10912,108 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool' +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -test -z "$LN_S" && LN_S="ln -s" +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + test -n "$ac_ct_AR" && break +done + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi +: ${AR=ar} +: ${AR_FLAGS=cru} @@ -11494,768 +11024,590 @@ test -z "$LN_S" && LN_S="ln -s" -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : $as_echo_n "(cached) " >&6 else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" + ; + return 0; +} _ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac -# Global variables: -ofile=libtool -can_build_shared=yes -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -with_gnu_ld="$lt_cv_prog_gnu_ld" -old_CC="$CC" -old_CFLAGS="$CFLAGS" -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - + done +IFS=$as_save_IFS -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" else - MAGIC_CMD=: + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB fi +else + RANLIB="$ac_cv_prog_RANLIB" fi - fi - ;; -esac +test -z "$RANLIB" && RANLIB=: -# Use C for the default configuration in the libtool script -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Source file extension for C test sources. -ac_ext=c -# Object file extension for compiled C test sources. -objext=o -objext=$objext -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -if test -n "$compiler"; then -lt_prog_compiler_no_builtin_flag= -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi -fi - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; +# Allow CC to be a program name with arguments. +compiler=$CC - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac - rdos*) - lt_prog_compiler_static='-non_shared' - ;; +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi + # Check to see that the pipe works correctly. + pipe_works=no -fi + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif +#ifdef __cplusplus +extern "C" { +#endif +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + cat <<_LT_EOF >> conftest.$ac_ext +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +fi -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' fi @@ -12264,1412 +11616,1087 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - ld_shlibs=yes +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" ;; esac ;; - *) - lt_use_gnu_ld_interface=yes + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac ;; esac fi + rm -rf conftest* + ;; - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -_LT_EOF - fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac ;; + esac + fi + rm -rf conftest* + ;; +esac - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; +need_locks="$enable_libtool_lock" - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done + done +IFS=$as_save_IFS fi - - aix_libpath=$lt_cv_aix_libpath_ +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi else - if ${lt_cv_aix_libpath_+:} false; then : + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done + done +IFS=$as_save_IFS fi - - aix_libpath=$lt_cv_aix_libpath_ +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - darwin* | rhapsody*) +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" else - whole_archive_flag_spec='' + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL fi - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +else + OTOOL="$ac_cv_prog_OTOOL" +fi - else - ld_shlibs=no + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi +done + done +IFS=$as_save_IFS - ;; +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - *nto* | *qnx*) - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* fi - ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" - *) - ld_shlibs=no - ;; - esac +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF +fi +done +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +# Set options +enable_dlopen=yes -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes + enable_win32_dll=no - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + done + IFS="$lt_save_ifs" ;; esac - fi - ;; -esac - - - - - - - - - - - - - - +else + enable_shared=yes +fi @@ -13679,6 +12706,28 @@ esac + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi @@ -13689,8 +12738,30 @@ esac +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + pic_mode=default +fi +test -z "$pic_mode" && pic_mode=default @@ -13698,6 +12769,28 @@ esac + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi @@ -13709,7 +12802,11 @@ esac +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' @@ -13740,6 +12837,7 @@ esac +test -z "$LN_S" && LN_S="ln -s" @@ -13754,45 +12852,246 @@ esac +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac +# Global variables: +ofile=libtool +can_build_shared=yes +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +with_gnu_ld="$lt_cv_prog_gnu_ld" +old_CC="$CC" +old_CFLAGS="$CFLAGS" +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + else + MAGIC_CMD=: + fi +fi + fi + ;; +esac +# Use C for the default configuration in the libtool script +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +# Source file extension for C test sources. +ac_ext=c +# Object file extension for compiled C test sources. +objext=o +objext=$objext +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' @@ -13800,771 +13099,522 @@ esac +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +# Allow CC to be a program name with arguments. +compiler=$CC +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +if test -n "$compiler"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } +lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH +fi - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac ;; - esac - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac else + # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no + rdos*) + lt_prog_compiler_static='-non_shared' + ;; - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; -fi + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac fi - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; +fi -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; -rdos*) - dynamic_linker=no - ;; -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi @@ -14572,177 +13622,632 @@ fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + ld_shlibs=yes + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. +_LT_EOF + fi + ;; + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : + if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -14754,107 +14259,56 @@ char dlopen (); int main () { -return dlopen (); + ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi fi - ;; + aix_libpath=$lt_cv_aix_libpath_ +fi - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : + if ${lt_cv_aix_libpath_+:} false; then : $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -14866,858 +14320,728 @@ char dlopen (); int main () { -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi fi - + aix_libpath=$lt_cv_aix_libpath_ fi - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif + darwin* | rhapsody*) -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } else - puts (dlerror ()); + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no + else + ld_shlibs=no fi -fi -rm -fr conftest* + ;; -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -#if HAVE_DLFCN_H -#include -#endif + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; -#include + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; + *) + ld_shlibs=no + ;; + esac - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } + fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no +with_gnu_ld=$with_gnu_ld -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC="$lt_save_CC" - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if ${ac_cv_prog_CXXCPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - done - ac_cv_prog_CXXCPP=$CXXCPP -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_cxx_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 else - _lt_caught_CXX_error=yes + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -compiler_needs_object_CXX=no -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_direct_absolute_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -hardcode_shlibpath_var_CXX=unsupported -hardcode_automatic_CXX=no -inherit_rpath_CXX=no -module_cmds_CXX= -module_expsym_cmds_CXX= -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -reload_flag_CXX=$reload_flag -reload_cmds_CXX=$reload_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= -enable_shared_with_static_runtimes_CXX=no -# Source file extension for C++ test sources. -ac_ext=cpp -# Object file extension for compiled C++ test sources. -objext=o -objext_CXX=$objext -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[]) { return(0); }' - # ltmain only uses $CC for tagged configurations so make sure $CC is set. -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC - # save warnings/boilerplate of simple test code - ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - compiler_CXX=$CC - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' - else - lt_prog_compiler_no_builtin_flag_CXX= - fi - if test "$GXX" = yes; then - # Set up default GNU C++ configuration -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld @@ -15725,1270 +15049,103 @@ with_gnu_ld=$lt_cv_prog_gnu_ld - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= - fi - else - with_gnu_ld=no - wlarc= - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - GXX=no - with_gnu_ld=no - wlarc= - fi - # PORTME: fill in a description of your system's C++ link characteristics - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - ld_shlibs_CXX=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_direct_absolute_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - file_list_spec_CXX='${wl}-f,' - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - export_dynamic_flag_spec_CXX='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi -fi - aix_libpath=$lt_cv_aix_libpath__CXX -fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__CXX"; then - lt_cv_aix_libpath__CXX="/usr/lib:/lib" - fi -fi - aix_libpath=$lt_cv_aix_libpath__CXX -fi - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - fi - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_CXX=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_CXX=no - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_CXX=' ' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=yes - file_list_spec_CXX='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' - enable_shared_with_static_runtimes_CXX=yes - # Don't use ranlib - old_postinstall_cmds_CXX='chmod 644 $oldlib' - postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - archive_cmds_need_lc_CXX=no - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec_CXX='' - fi - link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi - else - ld_shlibs_CXX=no - fi - ;; - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd2.*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - haiku*) - archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs_CXX=yes - ;; - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - export_dynamic_flag_spec_CXX='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - *) - hardcode_direct_CXX=yes - hardcode_direct_absolute_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - interix[3-9]*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - link_all_deplibs_CXX=yes - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - inherit_rpath_CXX=yes - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [1-5].* | *pgcpp\ [1-5].*) - prelink_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - old_archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - archive_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object_CXX=yes - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - *nto* | *qnx*) - ld_shlibs_CXX=yes - ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - hardcode_direct_absolute_CXX=yes - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - ld_shlibs_CXX=no - fi - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - case $host in - osf3*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - ;; - *) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - ;; - esac - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - output_verbose_link_cmd='func_echo_all' - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - runpath_var='LD_RUN_PATH' - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ - '"$old_archive_cmds_CXX" - reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ - '"$reload_cmds_CXX" - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } - test "$ld_shlibs_CXX" = no && can_build_shared=no - GCC_CXX="$GXX" - LD_CXX="$LD" - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - # Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= -cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac -if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling CXX test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -case $host_os in -interix[3-9]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - predep_objects_CXX= - postdep_objects_CXX= - postdeps_CXX= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac - - -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -esac - compiler_lib_search_dirs_CXX= -if test -n "${compiler_lib_search_path_CXX}"; then - compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi @@ -17009,704 +15166,777 @@ fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes - lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic_CXX='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static_CXX= - ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic_CXX='-fPIC -shared' + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ;; *) - lt_prog_compiler_pic_CXX='-fPIC' + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") ;; esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` else case $host_os in - aix[4-9]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - dgux*) - case $cc_basename in - ec++*) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_CXX='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - lt_prog_compiler_static_CXX='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-qpic' - lt_prog_compiler_static_CXX='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic_CXX='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx*) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc*) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; esac fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' ;; -esac + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } -lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_CXX=yes - fi - fi - $RM conftest* + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac -else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes fi - fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir +fi + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_CXX=yes - fi - else - lt_cv_prog_compiler_static_works_CXX=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; -if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then - : -else - lt_prog_compiler_static_CXX= -fi +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* +rdos*) + dynamic_linker=no + ;; -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - case $host_os in - aix[4-9]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) - exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - ;; - esac - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no -with_gnu_ld_CXX=$with_gnu_ld -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_CXX" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_CXX=yes - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc_CXX=no - else - lt_cv_archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } - archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX - ;; - esac - fi - ;; -esac @@ -17769,443 +15999,169 @@ esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= ;; - esac - ;; -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; + *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -18217,323 +16173,2900 @@ else int main () { - +return shl_load (); ; return 0; } _ACEOF -if ac_fn_cxx_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - +LIBS=$ac_check_lib_save_LIBS fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; +fi -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + +fi + + +fi + + +fi + + +fi + + ;; esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if ${ac_cv_prog_CXXCPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_cxx_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +else + _lt_caught_CXX_error=yes +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +compiler_needs_object_CXX=no +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_direct_absolute_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported +hardcode_automatic_CXX=no +inherit_rpath_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +reload_flag_CXX=$reload_flag +reload_cmds_CXX=$reload_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + + # save warnings/boilerplate of simple test code + ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + + ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + compiler_CXX=$CC + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' + else + lt_prog_compiler_no_builtin_flag_CXX= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + ld_shlibs_CXX=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + file_list_spec_CXX='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec_CXX='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath__CXX +fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__CXX"; then + lt_cv_aix_libpath__CXX="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath__CXX +fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' + fi + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_CXX=' ' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=yes + file_list_spec_CXX='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true' + enable_shared_with_static_runtimes_CXX=yes + # Don't use ranlib + old_postinstall_cmds_CXX='chmod 644 $oldlib' + postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-all-symbols' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + + + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec_CXX='' + fi + link_all_deplibs_CXX=yes + allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + if test "$lt_cv_apple_cc_single_mod" != "yes"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi + + else + ld_shlibs_CXX=no + fi + + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + ld_shlibs_CXX=no + ;; + + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + + gnu*) + ;; + + haiku*) + archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs_CXX=yes + ;; + + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + *) + hardcode_direct_CXX=yes + hardcode_direct_absolute_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + interix[3-9]*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + inherit_rpath_CXX=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [1-5].* | *pgcpp\ [1-5].*) + prelink_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + old_archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + archive_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + hardcode_libdir_flag_spec_CXX='-R$libdir' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object_CXX=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + ld_shlibs_CXX=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + hardcode_direct_absolute_CXX=yes + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + ld_shlibs_CXX=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + case $host in + osf3*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + ;; + *) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + ;; + esac + + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~ + '"$old_archive_cmds_CXX" + reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~ + '"$reload_cmds_CXX" + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } + test "$ld_shlibs_CXX" = no && can_build_shared=no + + GCC_CXX="$GXX" + LD_CXX="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + # Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= + +cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF + + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +case $host_os in +interix[3-9]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac + + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + compiler_lib_search_dirs_CXX= +if test -n "${compiler_lib_search_path_CXX}"; then + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic_CXX='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static_CXX= + ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix[4-9]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + dgux*) + case $cc_basename in + ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + lt_prog_compiler_static_CXX='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + xlc* | xlC* | bgxl[cC]* | mpixl[cC]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-qpic' + lt_prog_compiler_static_CXX='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_CXX='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac ;; - *) - shlibpath_overrides_runpath=yes + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no ;; esac fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -*) - dynamic_linker=no - ;; +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; } +lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi + $RM conftest* -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } +if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi +fi +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_CXX=yes + fi + else + lt_cv_prog_compiler_static_works_CXX=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } +if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + case $host_os in + aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + ;; + esac + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no +with_gnu_ld_CXX=$with_gnu_ld +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || - test -n "$runpath_var_CXX" || - test "X$hardcode_automatic_CXX" = "Xyes" ; then + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc_CXX=no + else + lt_cv_archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* - # We can hardcode non-existent directories. - if test "$hardcode_direct_CXX" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_CXX=unsupported fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 -$as_echo "$hardcode_action_CXX" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; } + archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX + ;; + esac + fi + ;; +esac + -if test "$hardcode_action_CXX" = relink || - test "$inherit_rpath_CXX" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi @@ -18541,2800 +19074,2887 @@ fi - fi # test -n "$compiler" - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - ac_ext=${ac_fc_srcext-f} -ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' -ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_fc_compiler_gnu -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi -archive_cmds_need_lc_FC=no -allow_undefined_flag_FC= -always_export_symbols_FC=no -archive_expsym_cmds_FC= -export_dynamic_flag_spec_FC= -hardcode_direct_FC=no -hardcode_direct_absolute_FC=no -hardcode_libdir_flag_spec_FC= -hardcode_libdir_separator_FC= -hardcode_minus_L_FC=no -hardcode_automatic_FC=no -inherit_rpath_FC=no -module_cmds_FC= -module_expsym_cmds_FC= -link_all_deplibs_FC=unknown -old_archive_cmds_FC=$old_archive_cmds -reload_flag_FC=$reload_flag -reload_cmds_FC=$reload_cmds -no_undefined_flag_FC= -whole_archive_flag_spec_FC= -enable_shared_with_static_runtimes_FC=no -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} -# Object file extension for compiled fc test sources. -objext=o -objext_FC=$objext -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - # ltmain only uses $CC for tagged configurations so make sure $CC is set. -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC - # save warnings/boilerplate of simple test code - ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - compiler_FC=$CC - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - if test -n "$compiler"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - GCC_FC="$ac_cv_fc_compiler_gnu" - LD_FC="$LD" - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - # Dependencies to place before and after the object being linked: -predep_objects_FC= -postdep_objects_FC= -predeps_FC= -postdeps_FC= -compiler_lib_search_path_FC= -cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; -esac -if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - fi - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_FC"; then - compiler_lib_search_path_FC="${prev}${p}" - else - compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_FC"; then - postdeps_FC="${prev}${p}" - else - postdeps_FC="${postdeps_FC} ${prev}${p}" - fi - fi - prev= - ;; - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_FC"; then - predep_objects_FC="$p" - else - predep_objects_FC="$predep_objects_FC $p" - fi - else - if test -z "$postdep_objects_FC"; then - postdep_objects_FC="$p" - else - postdep_objects_FC="$postdep_objects_FC $p" - fi - fi - ;; - *) ;; # Ignore the rest. - esac - done - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling FC test program" -fi -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS -# PORTME: override above test on systems where it is broken -case " $postdeps_FC " in -*" -lc "*) archive_cmds_need_lc_FC=no ;; -esac - compiler_lib_search_dirs_FC= -if test -n "${compiler_lib_search_path_FC}"; then - compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; - lt_prog_compiler_wl_FC= -lt_prog_compiler_pic_FC= -lt_prog_compiler_static_FC= +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; - if test "$GCC" = yes; then - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_static_FC='-static' +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_FC='-Bstatic' - fi - ;; +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic_FC='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_FC='-DDLL_EXPORT' - ;; +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_FC='-fno-common' - ;; +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static_FC= - ;; + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_FC='-fPIC' - ;; - esac - ;; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_FC=no - enable_shared=no - ;; +fi - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic_FC='-fPIC -shared' - ;; + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_FC=-Kconform_pic - fi - ;; + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes - *) - lt_prog_compiler_pic_FC='-fPIC' - ;; - esac + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl_FC='-Xlinker ' - if test -n "$lt_prog_compiler_pic_FC"; then - lt_prog_compiler_pic_FC="-Xcompiler $lt_prog_compiler_pic_FC" - fi - ;; - esac + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_FC='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_FC='-Bstatic' - else - lt_prog_compiler_static_FC='-bnso -bI:/lib/syscalls.exp' - fi - ;; + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_FC='-DDLL_EXPORT' - ;; +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_FC='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no ;; *) - lt_prog_compiler_pic_FC='+Z' + shlibpath_overrides_runpath=yes ;; esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_FC='${wl}-a ${wl}archive' - ;; + else + shlibpath_overrides_runpath=yes + fi + ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_FC='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_FC='-non_shared' - ;; +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-fPIC' - lt_prog_compiler_static_FC='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='--shared' - lt_prog_compiler_static_FC='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl_FC='-Wl,-Wl,,' - lt_prog_compiler_pic_FC='-PIC' - lt_prog_compiler_static_FC='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-fpic' - lt_prog_compiler_static_FC='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_FC='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_FC='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-qpic' - lt_prog_compiler_static_FC='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - lt_prog_compiler_wl_FC='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - lt_prog_compiler_wl_FC='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - lt_prog_compiler_wl_FC='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-fPIC' - lt_prog_compiler_static_FC='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-fpic' - lt_prog_compiler_static_FC='-Bstatic' - ;; - esac - ;; - esac - ;; +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; - newsos6) - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic_FC='-fPIC -shared' + siemens) + need_lib_prefix=no ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_FC='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_FC='-non_shared' + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + - rdos*) - lt_prog_compiler_static_FC='-non_shared' - ;; - solaris*) - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl_FC='-Qoption ld ';; - *) - lt_prog_compiler_wl_FC='-Wl,';; - esac - ;; - sunos4*) - lt_prog_compiler_wl_FC='-Qoption ld ' - lt_prog_compiler_pic_FC='-PIC' - lt_prog_compiler_static_FC='-Bstatic' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - ;; - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_FC='-Kconform_pic' - lt_prog_compiler_static_FC='-Bstatic' - fi - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_pic_FC='-KPIC' - lt_prog_compiler_static_FC='-Bstatic' - ;; - unicos*) - lt_prog_compiler_wl_FC='-Wl,' - lt_prog_compiler_can_build_shared_FC=no - ;; - uts4*) - lt_prog_compiler_pic_FC='-pic' - lt_prog_compiler_static_FC='-Bstatic' - ;; - *) - lt_prog_compiler_can_build_shared_FC=no - ;; - esac - fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_FC= - ;; - *) - lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC" - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_FC=$lt_prog_compiler_pic_FC -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_FC" >&5 -$as_echo "$lt_cv_prog_compiler_pic_FC" >&6; } -lt_prog_compiler_pic_FC=$lt_cv_prog_compiler_pic_FC -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_FC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... " >&6; } -if ${lt_cv_prog_compiler_pic_works_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works_FC=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_FC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_FC=yes - fi - fi - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; } -if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then - case $lt_prog_compiler_pic_FC in - "" | " "*) ;; - *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;; - esac -else - lt_prog_compiler_pic_FC= - lt_prog_compiler_can_build_shared_FC=no -fi -fi -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_FC=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_FC=yes - fi - else - lt_cv_prog_compiler_static_works_FC=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; } -if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then - : -else - lt_prog_compiler_static_FC= -fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_FC=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_FC=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o_FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_FC=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_FC=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || + test -n "$runpath_var_CXX" || + test "X$hardcode_automatic_CXX" = "Xyes" ; then -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn + # We can hardcode non-existent directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate fi else - need_locks=no + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 +$as_echo "$hardcode_action_CXX" >&6; } +if test "$hardcode_action_CXX" = relink || + test "$inherit_rpath_CXX" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - runpath_var= - allow_undefined_flag_FC= - always_export_symbols_FC=no - archive_cmds_FC= - archive_expsym_cmds_FC= - compiler_needs_object_FC=no - enable_shared_with_static_runtimes_FC=no - export_dynamic_flag_spec_FC= - export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic_FC=no - hardcode_direct_FC=no - hardcode_direct_absolute_FC=no - hardcode_libdir_flag_spec_FC= - hardcode_libdir_separator_FC= - hardcode_minus_L_FC=no - hardcode_shlibpath_var_FC=unsupported - inherit_rpath_FC=no - link_all_deplibs_FC=unknown - module_cmds_FC= - module_expsym_cmds_FC= - old_archive_from_new_cmds_FC= - old_archive_from_expsyms_cmds_FC= - thread_safe_flag_spec_FC= - whole_archive_flag_spec_FC= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_FC= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - ld_shlibs_FC=yes - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + ac_ext=${ac_fc_srcext-f} +ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5' +ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_fc_compiler_gnu - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec_FC='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_FC= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_FC=no - cat <<_LT_EOF 1>&2 +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. +archive_cmds_need_lc_FC=no +allow_undefined_flag_FC= +always_export_symbols_FC=no +archive_expsym_cmds_FC= +export_dynamic_flag_spec_FC= +hardcode_direct_FC=no +hardcode_direct_absolute_FC=no +hardcode_libdir_flag_spec_FC= +hardcode_libdir_separator_FC= +hardcode_minus_L_FC=no +hardcode_automatic_FC=no +inherit_rpath_FC=no +module_cmds_FC= +module_expsym_cmds_FC= +link_all_deplibs_FC=unknown +old_archive_cmds_FC=$old_archive_cmds +reload_flag_FC=$reload_flag +reload_cmds_FC=$reload_cmds +no_undefined_flag_FC= +whole_archive_flag_spec_FC= +enable_shared_with_static_runtimes_FC=no -_LT_EOF - fi - ;; +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='' - ;; - m68k) - archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_minus_L_FC=yes - ;; - esac - ;; +# Object file extension for compiled fc test sources. +objext=o +objext_FC=$objext - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_FC=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_FC=no - fi - ;; +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_FC='-L$libdir' - export_dynamic_flag_spec_FC='${wl}--export-all-symbols' - allow_undefined_flag_FC=unsupported - always_export_symbols_FC=no - enable_shared_with_static_runtimes_FC=yes - export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_FC=no - fi - ;; + # ltmain only uses $CC for tagged configurations so make sure $CC is set. - haiku*) - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs_FC=yes - ;; - interix[3-9]*) - hardcode_direct_FC=no - hardcode_shlibpath_var_FC=no - hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' - export_dynamic_flag_spec_FC='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec_FC= - tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object_FC=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object_FC=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs_FC=no - fi - ;; - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs_FC=no - cat <<_LT_EOF 1>&2 +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + + # save warnings/boilerplate of simple test code + ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_FC=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_FC=no - cat <<_LT_EOF 1>&2 + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. + compiler_FC=$CC + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_FC=no - fi - ;; - esac - ;; - sunos4*) - archive_cmds_FC='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_FC=yes - hardcode_shlibpath_var_FC=no - ;; + if test -n "$compiler"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_FC=no - fi - ;; - esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no - if test "$ld_shlibs_FC" = no; then - runpath_var= - hardcode_libdir_flag_spec_FC= - export_dynamic_flag_spec_FC= - whole_archive_flag_spec_FC= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. case $host_os in - aix3*) - allow_undefined_flag_FC=unsupported - always_export_symbols_FC=yes - archive_expsym_cmds_FC='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_FC=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_FC=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no fi - aix_use_runtimelinking=no + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi + GCC_FC="$ac_cv_fc_compiler_gnu" + LD_FC="$LD" - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + # Dependencies to place before and after the object being linked: +predep_objects_FC= +postdep_objects_FC= +predeps_FC= +postdeps_FC= +compiler_lib_search_path_FC= - archive_cmds_FC='' - hardcode_direct_FC=yes - hardcode_direct_absolute_FC=yes - hardcode_libdir_separator_FC=':' - link_all_deplibs_FC=yes - file_list_spec_FC='${wl}-f,' +cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_FC=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_FC=yes - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_libdir_separator_FC= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - export_dynamic_flag_spec_FC='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_FC=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_FC='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF - program main +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac - end -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : +if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC="/usr/lib:/lib" - fi + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no -fi + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in - aix_libpath=$lt_cv_aix_libpath__FC -fi + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi - hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_FC="-z nodefs" - archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath__FC+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat > conftest.$ac_ext <<_ACEOF - program main + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_FC"; then + compiler_lib_search_path_FC="${prev}${p}" + else + compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_FC"; then + postdeps_FC="${prev}${p}" + else + postdeps_FC="${postdeps_FC} ${prev}${p}" + fi + fi + prev= + ;; - end -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath__FC"; then - lt_cv_aix_libpath__FC="/usr/lib:/lib" - fi + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_FC"; then + predep_objects_FC="$p" + else + predep_objects_FC="$predep_objects_FC $p" + fi + else + if test -z "$postdep_objects_FC"; then + postdep_objects_FC="$p" + else + postdep_objects_FC="$postdep_objects_FC $p" + fi + fi + ;; -fi + *) ;; # Ignore the rest. - aix_libpath=$lt_cv_aix_libpath__FC -fi + esac + done - hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_FC=' ${wl}-bernotok' - allow_undefined_flag_FC=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_FC='$convenience' - fi - archive_cmds_need_lc_FC=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling FC test program" +fi - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_FC='' - ;; - m68k) - archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_minus_L_FC=yes - ;; - esac - ;; +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS - bsdi[45]*) - export_dynamic_flag_spec_FC=-rdynamic - ;; +# PORTME: override above test on systems where it is broken - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec_FC=' ' - allow_undefined_flag_FC=unsupported - always_export_symbols_FC=yes - file_list_spec_FC='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, FC)='true' - enable_shared_with_static_runtimes_FC=yes - exclude_expsyms_FC='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds_FC='chmod 644 $oldlib' - postlink_cmds_FC='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec_FC=' ' - allow_undefined_flag_FC=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds_FC='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes_FC=yes - ;; - esac - ;; - darwin* | rhapsody*) +case " $postdeps_FC " in +*" -lc "*) archive_cmds_need_lc_FC=no ;; +esac + compiler_lib_search_dirs_FC= +if test -n "${compiler_lib_search_path_FC}"; then + compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi - archive_cmds_need_lc_FC=no - hardcode_direct_FC=no - hardcode_automatic_FC=yes - hardcode_shlibpath_var_FC=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - compiler_needs_object_FC=yes - else - whole_archive_flag_spec_FC='' - fi - link_all_deplibs_FC=yes - allow_undefined_flag_FC="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - ld_shlibs_FC=no - fi - ;; - dgux*) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_shlibpath_var_FC=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_FC='-R$libdir' - hardcode_direct_FC=yes - hardcode_shlibpath_var_FC=no - ;; - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_FC=yes - hardcode_minus_L_FC=yes - hardcode_shlibpath_var_FC=no - ;; - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_FC='-R$libdir' - hardcode_direct_FC=yes - hardcode_shlibpath_var_FC=no - ;; - hpux9*) - if test "$GCC" = yes; then - archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_FC=: - hardcode_direct_FC=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_FC=yes - export_dynamic_flag_spec_FC='${wl}-E' - ;; - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_FC=: - hardcode_direct_FC=yes - hardcode_direct_absolute_FC=yes - export_dynamic_flag_spec_FC='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_FC=yes + + + lt_prog_compiler_wl_FC= +lt_prog_compiler_pic_FC= +lt_prog_compiler_static_FC= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_static_FC='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_FC='-Bstatic' fi ;; - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_FC=: + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic_FC='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct_FC=no - hardcode_shlibpath_var_FC=no - ;; - *) - hardcode_direct_FC=yes - hardcode_direct_absolute_FC=yes - export_dynamic_flag_spec_FC='${wl}-E' + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_FC=yes - ;; - esac - fi + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_FC='-DDLL_EXPORT' ;; - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat > conftest.$ac_ext <<_ACEOF + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_FC='-fno-common' + ;; - subroutine foo - end -_ACEOF -if ac_fn_fc_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc_FC='no' - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_FC=: - inherit_rpath_FC=yes - link_all_deplibs_FC=yes + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static_FC= ;; - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_FC='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_FC='-R$libdir' - hardcode_direct_FC=yes - hardcode_shlibpath_var_FC=no + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_FC='-fPIC' + ;; + esac ;; - newsos6) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_FC=yes - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_FC=: - hardcode_shlibpath_var_FC=no + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_FC=no + enable_shared=no ;; *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_FC='-fPIC -shared' ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_FC=yes - hardcode_shlibpath_var_FC=no - hardcode_direct_absolute_FC=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' - export_dynamic_flag_spec_FC='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_FC='-R$libdir' - ;; - *) - archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs_FC=no + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_FC=-Kconform_pic fi ;; - os2*) - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_minus_L_FC=yes - allow_undefined_flag_FC=unsupported - archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + *) + lt_prog_compiler_pic_FC='-fPIC' ;; + esac - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl_FC='-Xlinker ' + if test -n "$lt_prog_compiler_pic_FC"; then + lt_prog_compiler_pic_FC="-Xcompiler $lt_prog_compiler_pic_FC" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_FC='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_FC='-Bstatic' else - allow_undefined_flag_FC=' -expect_unresolved \*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + lt_prog_compiler_static_FC='-bnso -bI:/lib/syscalls.exp' fi - archive_cmds_need_lc_FC='no' - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_FC=: ;; - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_FC=' -expect_unresolved \*' - archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_FC='-DDLL_EXPORT' + ;; - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_FC='-rpath $libdir' - fi - archive_cmds_need_lc_FC='no' - hardcode_libdir_separator_FC=: + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_FC='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_FC='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_FC='${wl}-a ${wl}archive' ;; - solaris*) - no_undefined_flag_FC=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_FC='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_FC='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-fPIC' + lt_prog_compiler_static_FC='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='--shared' + lt_prog_compiler_static_FC='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl_FC='-Wl,-Wl,,' + lt_prog_compiler_pic_FC='-PIC' + lt_prog_compiler_static_FC='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-fpic' + lt_prog_compiler_static_FC='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl_FC='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_FC='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-qpic' + lt_prog_compiler_static_FC='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + lt_prog_compiler_wl_FC='' ;; - *) - wlarc='${wl}' - archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + lt_prog_compiler_wl_FC='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + lt_prog_compiler_wl_FC='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-fPIC' + lt_prog_compiler_static_FC='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-fpic' + lt_prog_compiler_static_FC='-Bstatic' ;; esac - fi - hardcode_libdir_flag_spec_FC='-R$libdir' - hardcode_shlibpath_var_FC=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract' - fi ;; esac - link_all_deplibs_FC=yes ;; - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_direct_FC=yes - hardcode_minus_L_FC=yes - hardcode_shlibpath_var_FC=no + newsos6) + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic_FC='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_FC='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_FC='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static_FC='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl_FC='-Qoption ld ';; + *) + lt_prog_compiler_wl_FC='-Wl,';; + esac ;; - sysv4) - case $host_vendor in - sni) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_FC=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_FC='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_FC='$CC -r -o $output$reload_objs' - hardcode_direct_FC=no - ;; - motorola) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_FC=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_FC=no + sunos4*) + lt_prog_compiler_wl_FC='-Qoption ld ' + lt_prog_compiler_pic_FC='-PIC' + lt_prog_compiler_static_FC='-Bstatic' ;; - sysv4.3*) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_FC=no - export_dynamic_flag_spec_FC='-Bexport' + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' ;; sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_FC=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_FC=yes + if test -d /usr/nec ;then + lt_prog_compiler_pic_FC='-Kconform_pic' + lt_prog_compiler_static_FC='-Bstatic' fi ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_FC='${wl}-z,text' - archive_cmds_need_lc_FC=no - hardcode_shlibpath_var_FC=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_pic_FC='-KPIC' + lt_prog_compiler_static_FC='-Bstatic' ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_FC='${wl}-z,text' - allow_undefined_flag_FC='${wl}-z,nodefs' - archive_cmds_need_lc_FC=no - hardcode_shlibpath_var_FC=no - hardcode_libdir_flag_spec_FC='${wl}-R,$libdir' - hardcode_libdir_separator_FC=':' - link_all_deplibs_FC=yes - export_dynamic_flag_spec_FC='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi + unicos*) + lt_prog_compiler_wl_FC='-Wl,' + lt_prog_compiler_can_build_shared_FC=no ;; uts4*) - archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_FC='-L$libdir' - hardcode_shlibpath_var_FC=no + lt_prog_compiler_pic_FC='-pic' + lt_prog_compiler_static_FC='-Bstatic' ;; *) - ld_shlibs_FC=no + lt_prog_compiler_can_build_shared_FC=no ;; esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec_FC='${wl}-Blargedynsym' - ;; - esac - fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5 -$as_echo "$ld_shlibs_FC" >&6; } -test "$ld_shlibs_FC" = no && can_build_shared=no +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_FC= + ;; + *) + lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC" + ;; +esac -with_gnu_ld_FC=$with_gnu_ld +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic_FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_FC=$lt_prog_compiler_pic_FC +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_FC" >&5 +$as_echo "$lt_cv_prog_compiler_pic_FC" >&6; } +lt_prog_compiler_pic_FC=$lt_cv_prog_compiler_pic_FC +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_FC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... " >&6; } +if ${lt_cv_prog_compiler_pic_works_FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_FC=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_FC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_FC=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then + case $lt_prog_compiler_pic_FC in + "" | " "*) ;; + *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;; + esac +else + lt_prog_compiler_pic_FC= + lt_prog_compiler_can_build_shared_FC=no +fi + +fi # -# Do we need to explicitly link libc? +# Check to make sure the static flag actually works. # -case "x$archive_cmds_need_lc_FC" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_FC=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_FC in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc_FC+:} false; then : +wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works_FC+:} false; then : $as_echo_n "(cached) " >&6 else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_FC - pic_flag=$lt_prog_compiler_pic_FC - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_FC - allow_undefined_flag_FC= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc_FC=no - else - lt_cv_archive_cmds_need_lc_FC=yes - fi - allow_undefined_flag_FC=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* + lt_cv_prog_compiler_static_works_FC=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_FC=yes + fi + else + lt_cv_prog_compiler_static_works_FC=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc_FC" >&6; } - archive_cmds_need_lc_FC=$lt_cv_archive_cmds_need_lc_FC - ;; - esac - fi - ;; -esac - - - - - - - - - - - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; } +if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then + : +else + lt_prog_compiler_static_FC= +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_FC=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_FC=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o_FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_FC=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_FC=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; } +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + runpath_var= + allow_undefined_flag_FC= + always_export_symbols_FC=no + archive_cmds_FC= + archive_expsym_cmds_FC= + compiler_needs_object_FC=no + enable_shared_with_static_runtimes_FC=no + export_dynamic_flag_spec_FC= + export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic_FC=no + hardcode_direct_FC=no + hardcode_direct_absolute_FC=no + hardcode_libdir_flag_spec_FC= + hardcode_libdir_separator_FC= + hardcode_minus_L_FC=no + hardcode_shlibpath_var_FC=unsupported + inherit_rpath_FC=no + link_all_deplibs_FC=unknown + module_cmds_FC= + module_expsym_cmds_FC= + old_archive_from_new_cmds_FC= + old_archive_from_expsyms_cmds_FC= + thread_safe_flag_spec_FC= + whole_archive_flag_spec_FC= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_FC= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + ld_shlibs_FC=yes + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec_FC='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_FC= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_FC=no + cat <<_LT_EOF 1>&2 +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. +_LT_EOF + fi + ;; + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='' + ;; + m68k) + archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_minus_L_FC=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_FC=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_FC=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_FC='-L$libdir' + export_dynamic_flag_spec_FC='${wl}--export-all-symbols' + allow_undefined_flag_FC=unsupported + always_export_symbols_FC=no + enable_shared_with_static_runtimes_FC=yes + export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_FC=no + fi + ;; + haiku*) + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs_FC=yes + ;; + interix[3-9]*) + hardcode_direct_FC=no + hardcode_shlibpath_var_FC=no + hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' + export_dynamic_flag_spec_FC='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec_FC= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object_FC=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object_FC=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs_FC=no + fi + ;; + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs_FC=no + cat <<_LT_EOF 1>&2 +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_FC=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_FC=no + cat <<_LT_EOF 1>&2 +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_FC=no + fi + ;; + esac + ;; + sunos4*) + archive_cmds_FC='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_FC=yes + hardcode_shlibpath_var_FC=no + ;; + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_FC=no + fi + ;; + esac + if test "$ld_shlibs_FC" = no; then + runpath_var= + hardcode_libdir_flag_spec_FC= + export_dynamic_flag_spec_FC= + whole_archive_flag_spec_FC= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_FC=unsupported + always_export_symbols_FC=yes + archive_expsym_cmds_FC='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_FC=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_FC=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no + archive_cmds_FC='' + hardcode_direct_FC=yes + hardcode_direct_absolute_FC=yes + hardcode_libdir_separator_FC=':' + link_all_deplibs_FC=yes + file_list_spec_FC='${wl}-f,' -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_FC=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_FC=yes + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_libdir_separator_FC= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH + export_dynamic_flag_spec_FC='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_FC=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_FC='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat > conftest.$ac_ext <<_ACEOF + program main - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; + end +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__FC"; then + lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__FC"; then + lt_cv_aix_libpath__FC="/usr/lib:/lib" fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; +fi -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; + aix_libpath=$lt_cv_aix_libpath__FC +fi -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no + hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_FC="-z nodefs" + archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath__FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat > conftest.$ac_ext <<_ACEOF + program main - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes + end +_ACEOF +if ac_fn_fc_try_link "$LINENO"; then : - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath__FC"; then + lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath__FC"; then + lt_cv_aix_libpath__FC="/usr/lib:/lib" + fi - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; +fi - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' + aix_libpath=$lt_cv_aix_libpath__FC +fi - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_FC=' ${wl}-bernotok' + allow_undefined_flag_FC=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_FC='$convenience' + fi + archive_cmds_need_lc_FC=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") ;; - esac - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_FC='' + ;; + m68k) + archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_minus_L_FC=yes + ;; + esac + ;; - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; + bsdi[45]*) + export_dynamic_flag_spec_FC=-rdynamic + ;; -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec_FC=' ' + allow_undefined_flag_FC=unsupported + always_export_symbols_FC=yes + file_list_spec_FC='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, FC)='true' + enable_shared_with_static_runtimes_FC=yes + exclude_expsyms_FC='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds_FC='chmod 644 $oldlib' + postlink_cmds_FC='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec_FC=' ' + allow_undefined_flag_FC=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds_FC='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes_FC=yes + ;; + esac + ;; - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; + darwin* | rhapsody*) -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` + archive_cmds_need_lc_FC=no + hardcode_direct_FC=no + hardcode_automatic_FC=yes + hardcode_shlibpath_var_FC=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + compiler_needs_object_FC=yes else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac + whole_archive_flag_spec_FC='' fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no + link_all_deplibs_FC=yes + allow_undefined_flag_FC="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs_FC=no + fi + ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes + + dgux*) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_shlibpath_var_FC=no ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; -gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_FC='-R$libdir' + hardcode_direct_FC=yes + hardcode_shlibpath_var_FC=no + ;; -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_FC=yes + hardcode_minus_L_FC=yes + hardcode_shlibpath_var_FC=no + ;; -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_FC='-R$libdir' + hardcode_direct_FC=yes + hardcode_shlibpath_var_FC=no + ;; -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; + hpux9*) + if test "$GCC" = yes; then + archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_FC=: + hardcode_direct_FC=yes -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_FC=yes + export_dynamic_flag_spec_FC='${wl}-E' + ;; -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_FC=: + hardcode_direct_FC=yes + hardcode_direct_absolute_FC=yes + export_dynamic_flag_spec_FC='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_FC=yes + fi + ;; -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_FC=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_FC=no + hardcode_shlibpath_var_FC=no + ;; + *) + hardcode_direct_FC=yes + hardcode_direct_absolute_FC=yes + export_dynamic_flag_spec_FC='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_FC=yes + ;; + esac + fi + ;; - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\"" - cat > conftest.$ac_ext <<_ACEOF - program main + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat > conftest.$ac_ext <<_ACEOF + subroutine foo end _ACEOF if ac_fn_fc_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - + LDFLAGS="$save_LDFLAGS" fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc_FC='no' + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_FC=: + inherit_rpath_FC=yes + link_all_deplibs_FC=yes + ;; - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_FC='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_FC='-R$libdir' + hardcode_direct_FC=yes + hardcode_shlibpath_var_FC=no + ;; - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes + newsos6) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_FC=yes + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_FC=: + hardcode_shlibpath_var_FC=no + ;; - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi + *nto* | *qnx*) + ;; - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_FC=yes + hardcode_shlibpath_var_FC=no + hardcode_direct_absolute_FC=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' + export_dynamic_flag_spec_FC='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_FC='-R$libdir' + ;; + *) + archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs_FC=no + fi + ;; -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; + os2*) + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_minus_L_FC=yes + allow_undefined_flag_FC=unsupported + archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_FC=' -expect_unresolved \*' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc_FC='no' + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_FC=: + ;; -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_FC=' -expect_unresolved \*' + archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_FC='-rpath $libdir' + fi + archive_cmds_need_lc_FC='no' + hardcode_libdir_separator_FC=: + ;; + + solaris*) + no_undefined_flag_FC=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec_FC='-R$libdir' + hardcode_shlibpath_var_FC=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs_FC=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_direct_FC=yes + hardcode_minus_L_FC=yes + hardcode_shlibpath_var_FC=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_FC=yes # is this really true??? ;; - *) - shlibpath_overrides_runpath=yes + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_FC='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_FC='$CC -r -o $output$reload_objs' + hardcode_direct_FC=no + ;; + motorola) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_FC=no #Motorola manual says yes, but my tests say they lie ;; esac - else - shlibpath_overrides_runpath=yes - fi - ;; + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_FC=no + ;; -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; + sysv4.3*) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_FC=no + export_dynamic_flag_spec_FC='-Bexport' + ;; -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_FC=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_FC=yes + fi + ;; -rdos*) - dynamic_linker=no - ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_FC='${wl}-z,text' + archive_cmds_need_lc_FC=no + hardcode_shlibpath_var_FC=no + runpath_var='LD_RUN_PATH' -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; + if test "$GCC" = yes; then + archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_FC='${wl}-z,text' + allow_undefined_flag_FC='${wl}-z,nodefs' + archive_cmds_need_lc_FC=no + hardcode_shlibpath_var_FC=no + hardcode_libdir_flag_spec_FC='${wl}-R,$libdir' + hardcode_libdir_separator_FC=':' + link_all_deplibs_FC=yes + export_dynamic_flag_spec_FC='${wl}-Bexport' + runpath_var='LD_RUN_PATH' -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no + if test "$GCC" = yes; then + archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + + uts4*) + archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_FC='-L$libdir' + hardcode_shlibpath_var_FC=no ;; - esac - ;; -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; + *) + ld_shlibs_FC=no + ;; + esac -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec_FC='${wl}-Blargedynsym' ;; - esac + esac + fi fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5 +$as_echo "$ld_shlibs_FC" >&6; } +test "$ld_shlibs_FC" = no && can_build_shared=no -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; +with_gnu_ld_FC=$with_gnu_ld + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_FC" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_FC=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_FC in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc_FC+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_FC + pic_flag=$lt_prog_compiler_pic_FC + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_FC + allow_undefined_flag_FC= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc_FC=no + else + lt_cv_archive_cmds_need_lc_FC=yes + fi + allow_undefined_flag_FC=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* -*) - dynamic_linker=no +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc_FC" >&6; } + archive_cmds_need_lc_FC=$lt_cv_archive_cmds_need_lc_FC + ;; + esac + fi ;; esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi @@ -21373,43 +21993,7 @@ fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_FC= -if test -n "$hardcode_libdir_flag_spec_FC" || - test -n "$runpath_var_FC" || - test "X$hardcode_automatic_FC" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct_FC" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no && - test "$hardcode_minus_L_FC" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_FC=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_FC=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_FC=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5 -$as_echo "$hardcode_action_FC" >&6; } -if test "$hardcode_action_FC" = relink || - test "$inherit_rpath_FC" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi @@ -21417,18 +22001,8 @@ fi - fi # test -n "$compiler" - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu @@ -21440,1070 +22014,979 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - ac_config_commands="$ac_config_commands libtool" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } -# Only expand once: +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; -## ---------------------------------------------------------------------- -## Check if we should install only statically linked executables. -## This check needs to occur after libtool is initialized because -## we check a libtool cache value and may issue a warning based -## on its result. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should install only statically linked executables" >&5 -$as_echo_n "checking if we should install only statically linked executables... " >&6; } -# Check whether --enable-static_exec was given. -if test "${enable_static_exec+set}" = set; then : - enableval=$enable_static_exec; STATIC_EXEC=$enableval -fi +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; -if test "X$STATIC_EXEC" = "Xyes"; then - echo "yes" - ## Issue a warning if -static flag is not supported. - if test "X$lt_cv_prog_compiler_static_works" = "Xno"; then - echo " warning: -static flag not supported on this system; executable won't statically link shared system libraries." - LT_STATIC_EXEC="" - else - LT_STATIC_EXEC="-all-static" - fi -else - echo "no" - LT_STATIC_EXEC="" -fi - if test "X$LT_STATIC_EXEC" = X; then - USE_PLUGINS_CONDITIONAL_TRUE= - USE_PLUGINS_CONDITIONAL_FALSE='#' -else - USE_PLUGINS_CONDITIONAL_TRUE='#' - USE_PLUGINS_CONDITIONAL_FALSE= -fi +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' -## Fix up the INSTALL macro if it's a relative path. We want the -## full-path to the binary instead. -case "$INSTALL" in - *install-sh*) - INSTALL='\${top_srcdir}/bin/install-sh -c' + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' ;; -esac -## ---------------------------------------------------------------------- -## Some users have reported problems with libtool's use of '-Wl,-rpath' to -## link shared libraries in nondefault directories. Allow users to -## disable embedding the rpath information in the executables and to -## instead solely rely on the information in LD_LIBRARY_PATH. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if -Wl,-rpath should be used to link shared libs in nondefault directories" >&5 -$as_echo_n "checking if -Wl,-rpath should be used to link shared libs in nondefault directories... " >&6; } -# Check whether --enable-sharedlib-rpath was given. -if test "${enable_sharedlib_rpath+set}" = set; then : - enableval=$enable_sharedlib_rpath; RPATH=$enableval -fi + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac -case "X-$RPATH" in - X-no) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - runpath_var= - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_into_libs=no - ;; - X-|X-yes) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' ;; + *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: error" >&5 -$as_echo "error" >&6; } - as_fn_error $? "\'$enableval\' is not a valid rpath type" "$LINENO" 5 + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' ;; -esac - -## ---------------------------------------------------------------------- -## pmake will throw an error if variables are undefined in a Makefile. -## These errors can be changed to warnings using the -V flag. -## - AM_MAKEFLAGS="" + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; -## Don't run test if MAKE is defined but is the empty string -if test -n "${MAKE-make}"; then +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether make will build with undefined variables" >&5 -$as_echo_n "checking whether make will build with undefined variables... " >&6; } + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; - cat >maketest </dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, setting -V flag" >&5 -$as_echo "no, setting -V flag" >&6; } - AM_MAKEFLAGS="\-V" + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; - rm maketest -fi - -## ---------------------------------------------------------------------- -## Production flags? Save the value in $CONFIG_MODE so we have it for -## the record. -## -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for production mode" >&5 -$as_echo_n "checking for production mode... " >&6; } -# Check whether --enable-production was given. -if test "${enable_production+set}" = set; then : - enableval=$enable_production; -fi +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; -case "X-$enable_production" in - X-yes) - enable_production="yes" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: production" >&5 -$as_echo "production" >&6; } - CONFIG_MODE=production - H5_CFLAGS="$H5_CFLAGS $PROD_CFLAGS" - H5_CPPFLAGS="$H5_CPPFLAGS $PROD_CPPFLAGS" - H5_CXXFLAGS="$H5_CXXFLAGS $PROD_CXXFLAGS" - H5_FCFLAGS="$H5_FCFLAGS $PROD_FCFLAGS" - ;; - X-|X-no) - enable_production="no" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: development" >&5 -$as_echo "development" >&6; } - CONFIG_MODE=development - H5_CFLAGS="$H5_CFLAGS $DEBUG_CFLAGS" - H5_CPPFLAGS="$H5_CPPFLAGS $DEBUG_CPPFLAGS" - H5_CXXFLAGS="$H5_CXXFLAGS $DEBUG_CXXFLAGS" - H5_FCFLAGS="$H5_FCFLAGS $DEBUG_FCFLAGS" - ;; - X-pg|X-profile) - enable_production="profile" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: profile" >&5 -$as_echo "profile" >&6; } - CONFIG_MODE=profile - H5_CFLAGS="$H5_CFLAGS $PROFILE_CFLAGS" - H5_CPPFLAGS="$H5_CPPFLAGS $PROFILE_CPPFLAGS" - H5_CXXFLAGS="$H5_CXXFLAGS $PROFILE_CXXFLAGS" - H5_FCFLAGS="$H5_FCFLAGS $PROFILE_FCFLAGS" +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) - enable_production="user-defined" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: user-defined" >&5 -$as_echo "user-defined" >&6; } - CONFIG_MODE="$enableval" + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' ;; -esac + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; -## ---------------------------------------------------------------------- -## Check for system libraries. "dl" stands for dynamically loaded library -## -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ceil in -lm" >&5 -$as_echo_n "checking for ceil in -lm... " >&6; } -if ${ac_cv_lib_m_ceil+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lm $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ceil (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return ceil (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_m_ceil=yes -else - ac_cv_lib_m_ceil=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_ceil" >&5 -$as_echo "$ac_cv_lib_m_ceil" >&6; } -if test "x$ac_cv_lib_m_ceil" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBM 1 -_ACEOF +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; - LIBS="-lm $LIBS" +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; -fi +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : $as_echo_n "(cached) " >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\"" + cat > conftest.$ac_ext <<_ACEOF + program main -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return dlopen (); - ; - return 0; -} + end _ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no +if ac_fn_fc_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBDL 1 -_ACEOF - - LIBS="-ldl $LIBS" - -fi - - -## ---------------------------------------------------------------------- -## Check for system header files. -## -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes -else - ac_cv_header_stdc=no -fi -rm -f conftest* + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi -fi + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; -else - ac_cv_header_stdc=no -fi -rm -f conftest* +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; -fi +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi +rdos*) + dynamic_linker=no + ;; -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; -$as_echo "#define STDC_HEADERS 1" >>confdefs.h +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; -fi +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 -$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } -if ${ac_cv_header_time+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -if ((struct tm *) 0) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_time=yes -else - ac_cv_header_time=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 -$as_echo "$ac_cv_header_time" >&6; } -if test $ac_cv_header_time = yes; then +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; -$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; -fi +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no -## Unix -for ac_header in sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi -done -for ac_header in sys/socket.h sys/types.h sys/file.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done -for ac_header in stddef.h setjmp.h features.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done -for ac_header in dirent.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "dirent.h" "ac_cv_header_dirent_h" "$ac_includes_default" -if test "x$ac_cv_header_dirent_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DIRENT_H 1 -_ACEOF -fi -done -for ac_header in stdint.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default" -if test "x$ac_cv_header_stdint_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_STDINT_H 1 -_ACEOF - C9x=yes -fi -done -## Darwin -for ac_header in mach/mach_time.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "mach/mach_time.h" "ac_cv_header_mach_mach_time_h" "$ac_includes_default" -if test "x$ac_cv_header_mach_mach_time_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_MACH_MACH_TIME_H 1 -_ACEOF -fi -done -## Also need to detect Darwin for pubconf -case $host_os in - darwin*) -$as_echo "#define HAVE_DARWIN 1" >>confdefs.h - ;; -esac -## Windows -case "`uname`" in - CYGWIN*) - for ac_header in io.h sys/timeb.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done - ;; - MINGW*) - for ac_header in io.h winsock2.h sys/timeb.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lws2_32" >&5 -$as_echo_n "checking for main in -lws2_32... " >&6; } -if ${ac_cv_lib_ws2_32_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lws2_32 $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ws2_32_main=yes -else - ac_cv_lib_ws2_32_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ws2_32_main" >&5 -$as_echo "$ac_cv_lib_ws2_32_main" >&6; } -if test "x$ac_cv_lib_ws2_32_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBWS2_32 1 -_ACEOF - LIBS="-lws2_32 $LIBS" -fi -ac_cv_lib_ws2_32=ac_cv_lib_ws2_32_main - ;; - *) - for ac_header in io.h winsock2.h sys/timeb.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done - ;; -esac -## ---------------------------------------------------------------------- -## Some platforms require that all symbols are resolved when a library -## is linked. We can use the -no-undefined flag to tell libtool that -## it will be able to build shared libraries on these architectures, -## as it will not do so by default. -## -if test "X${enable_shared}" = "Xyes"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool needs -no-undefined flag to build shared libraries" >&5 -$as_echo_n "checking if libtool needs -no-undefined flag to build shared libraries... " >&6; } - case "`uname`" in - CYGWIN*|MINGW*|AIX*) - ## Add in the -no-undefined flag to LDFLAGS for libtool. - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - H5_LDFLAGS="$H5_LDFLAGS -no-undefined" - ;; - *) - ## Don't add in anything. - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi -## ---------------------------------------------------------------------- -## Use the macro _AC_SYS_LARGEFILE_MACRO_VALUE to test defines -## that might need to be set for largefile support to behave -## correctly. This macro is defined in acsite.m4 and overrides -## the version provided by Autoconf (as of v2.65). The custom -## macro additionally adds the appropriate defines to AM_CPPFLAGS -## so that later configure checks have them visible. -## Check for _FILE_OFFSET_BITS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 -$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } -if ${ac_cv_sys_file_offset_bits+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=no; break + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_FC= +if test -n "$hardcode_libdir_flag_spec_FC" || + test -n "$runpath_var_FC" || + test "X$hardcode_automatic_FC" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct_FC" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no && + test "$hardcode_minus_L_FC" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_FC=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_FC=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_FC=unsupported fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _FILE_OFFSET_BITS 64 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5 +$as_echo "$hardcode_action_FC" >&6; } - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=64; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_file_offset_bits=unknown - break -done +if test "$hardcode_action_FC" = relink || + test "$inherit_rpath_FC" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 -$as_echo "$ac_cv_sys_file_offset_bits" >&6; } -case $ac_cv_sys_file_offset_bits in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits -_ACEOF - AM_CPPFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits $AM_CPPFLAGS";; -esac -rm -rf conftest* -## Check for _LARGE_FILES -if test "$ac_cv_sys_file_offset_bits" = unknown; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 -$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } -if ${ac_cv_sys_large_files+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=no; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGE_FILES 1 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=1; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_large_files=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 -$as_echo "$ac_cv_sys_large_files" >&6; } -case $ac_cv_sys_large_files in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _LARGE_FILES $ac_cv_sys_large_files -_ACEOF - AM_CPPFLAGS="-D_LARGE_FILES=$ac_cv_sys_large_files $AM_CPPFLAGS";; -esac -rm -rf conftest* -fi -## ---------------------------------------------------------------------- -## Add necessary defines for Linux Systems. -## -case "$host_cpu-$host_vendor-$host_os" in - *linux*) - ## Make available various LFS-related routines using the following - ## _LARGEFILE*_SOURCE macros. - AM_CPPFLAGS="-D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $AM_CPPFLAGS" - ## Add POSIX support on Linux systems, so defines - ## __USE_POSIX, which is required to get the prototype for fdopen - ## defined correctly in . - ## - ## This flag was removed from h5cc as of 2009-10-17 when it was found - ## that the flag broke compiling netCDF-4 code with h5cc, but kept in - ## H5_CPPFLAGS because fdopen and HDfdopen fail without it. HDfdopen - ## is used only by H5_debug_mask which is used only when debugging in - ## H5_init_library (all in H5.c). When the flag was removed this was - ## the only compile failure noted. - ## - ## This was originally defined as _POSIX_SOURCE which was updated to - ## _POSIX_C_SOURCE=199506L to expose a greater amount of POSIX - ## functionality so clock_gettime and CLOCK_MONOTONIC are defined - ## correctly. This was later updated to 200112L so that - ## posix_memalign() is visible for the direct VFD code on Linux - ## systems. - ## - ## POSIX feature information can be found in the gcc manual at: - ## http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html - H5_CPPFLAGS="-D_POSIX_C_SOURCE=200112L $H5_CPPFLAGS" + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" - ## Need to add this so that O_DIRECT is visible for the direct - ## VFD on Linux systems. - H5_CPPFLAGS="-D_GNU_SOURCE $H5_CPPFLAGS" - ;; -esac -## Need to add the AM_ and H5_ into CFLAGS/CPPFLAGS to make them visible -## for configure checks. -## Note: Both will be restored by the end of configure. -CPPFLAGS="$H5_CPPFLAGS $AM_CPPFLAGS $CPPFLAGS" -CFLAGS="$H5_CFLAGS $AM_CFLAGS $CFLAGS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -off64_t n = 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - for ac_func in lseek64 fseeko64 ftello64 ftruncate64 -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF -fi -done +# Only expand once: -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: skipping test for lseek64(), fseeko64 , ftello64, ftruncate64() because off64_t is not defined" >&5 -$as_echo "skipping test for lseek64(), fseeko64 , ftello64, ftruncate64() because off64_t is not defined" >&6; } -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -for ac_func in fseeko ftello -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF -fi -done -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -struct stat64 sb; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - for ac_func in stat64 fstat64 -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF +## ---------------------------------------------------------------------- +## Check if we should install only statically linked executables. +## This check needs to occur after libtool is initialized because +## we check a libtool cache value and may issue a warning based +## on its result. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should install only statically linked executables" >&5 +$as_echo_n "checking if we should install only statically linked executables... " >&6; } +# Check whether --enable-static_exec was given. +if test "${enable_static_exec+set}" = set; then : + enableval=$enable_static_exec; STATIC_EXEC=$enableval fi -done + +if test "X$STATIC_EXEC" = "Xyes"; then + echo "yes" + ## Issue a warning if -static flag is not supported. + if test "X$lt_cv_prog_compiler_static_works" = "Xno"; then + echo " warning: -static flag not supported on this system; executable won't statically link shared system libraries." + LT_STATIC_EXEC="" + else + LT_STATIC_EXEC="-all-static" + fi else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: skipping test for stat64() and fstat64()" >&5 -$as_echo "skipping test for stat64() and fstat64()" >&6; } + echo "no" + LT_STATIC_EXEC="" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -## ---------------------------------------------------------------------- -## Data types and their sizes. -## -ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" -if test "x$ac_cv_type_off_t" = xyes; then : - + if test "X$LT_STATIC_EXEC" = X; then + USE_PLUGINS_CONDITIONAL_TRUE= + USE_PLUGINS_CONDITIONAL_FALSE='#' else - -cat >>confdefs.h <<_ACEOF -#define off_t long int -_ACEOF - + USE_PLUGINS_CONDITIONAL_TRUE='#' + USE_PLUGINS_CONDITIONAL_FALSE= fi -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : -else -cat >>confdefs.h <<_ACEOF -#define size_t unsigned long -_ACEOF +## Fix up the INSTALL macro if it's a relative path. We want the +## full-path to the binary instead. +case "$INSTALL" in + *install-sh*) + INSTALL='\${top_srcdir}/bin/install-sh -c' + ;; +esac + +## ---------------------------------------------------------------------- +## Some users have reported problems with libtool's use of '-Wl,-rpath' to +## link shared libraries in nondefault directories. Allow users to +## disable embedding the rpath information in the executables and to +## instead solely rely on the information in LD_LIBRARY_PATH. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if -Wl,-rpath should be used to link shared libs in nondefault directories" >&5 +$as_echo_n "checking if -Wl,-rpath should be used to link shared libs in nondefault directories... " >&6; } +# Check whether --enable-sharedlib-rpath was given. +if test "${enable_sharedlib_rpath+set}" = set; then : + enableval=$enable_sharedlib_rpath; RPATH=$enableval fi -ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" -if test "x$ac_cv_type_ssize_t" = xyes; then : -else +case "X-$RPATH" in + X-no) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + runpath_var= + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_into_libs=no + ;; + X-|X-yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: error" >&5 +$as_echo "error" >&6; } + as_fn_error $? "\'$enableval\' is not a valid rpath type" "$LINENO" 5 + ;; +esac -cat >>confdefs.h <<_ACEOF -#define ssize_t long -_ACEOF +## ---------------------------------------------------------------------- +## pmake will throw an error if variables are undefined in a Makefile. +## These errors can be changed to warnings using the -V flag. +## + AM_MAKEFLAGS="" -fi +## Don't run test if MAKE is defined but is the empty string +if test -n "${MAKE-make}"; then -ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default" -if test "x$ac_cv_type_ptrdiff_t" = xyes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether make will build with undefined variables" >&5 +$as_echo_n "checking whether make will build with undefined variables... " >&6; } -else + cat >maketest <>confdefs.h <<_ACEOF -#define ptrdiff_t long -_ACEOF + if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, setting -V flag" >&5 +$as_echo "no, setting -V flag" >&6; } + AM_MAKEFLAGS="\-V" + fi + rm maketest fi - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 -$as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if ${ac_cv_c_bigendian+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; +## ---------------------------------------------------------------------- +## Production flags? Save the value in $CONFIG_MODE so we have it for +## the record. +## +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for production mode" >&5 +$as_echo_n "checking for production mode... " >&6; } +# Check whether --enable-production was given. +if test "${enable_production+set}" = set; then : + enableval=$enable_production; +fi -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # Check for potential -arch flags. It is not universal unless - # there are at least two -arch flags with different values. - ac_arch= - ac_prev= - for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do - if test -n "$ac_prev"; then - case $ac_word in - i?86 | x86_64 | ppc | ppc64) - if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then - ac_arch=$ac_word - else - ac_cv_c_bigendian=universal - break - fi - ;; - esac - ac_prev= - elif test "x$ac_word" = "x-arch"; then - ac_prev=arch - fi - done -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +case "X-$enable_production" in + X-yes) + enable_production="yes" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: production" >&5 +$as_echo "production" >&6; } + CONFIG_MODE=production + H5_CFLAGS="$H5_CFLAGS $PROD_CFLAGS" + H5_CPPFLAGS="$H5_CPPFLAGS $PROD_CPPFLAGS" + H5_CXXFLAGS="$H5_CXXFLAGS $PROD_CXXFLAGS" + H5_FCFLAGS="$H5_FCFLAGS $PROD_FCFLAGS" + ;; + X-|X-no) + enable_production="no" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: development" >&5 +$as_echo "development" >&6; } + CONFIG_MODE=development + H5_CFLAGS="$H5_CFLAGS $DEBUG_CFLAGS" + H5_CPPFLAGS="$H5_CPPFLAGS $DEBUG_CPPFLAGS" + H5_CXXFLAGS="$H5_CXXFLAGS $DEBUG_CXXFLAGS" + H5_FCFLAGS="$H5_FCFLAGS $DEBUG_FCFLAGS" + ;; + X-pg|X-profile) + enable_production="profile" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: profile" >&5 +$as_echo "profile" >&6; } + CONFIG_MODE=profile + H5_CFLAGS="$H5_CFLAGS $PROFILE_CFLAGS" + H5_CPPFLAGS="$H5_CPPFLAGS $PROFILE_CPPFLAGS" + H5_CXXFLAGS="$H5_CXXFLAGS $PROFILE_CXXFLAGS" + H5_FCFLAGS="$H5_FCFLAGS $PROFILE_FCFLAGS" + ;; + *) + enable_production="user-defined" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: user-defined" >&5 +$as_echo "user-defined" >&6; } + CONFIG_MODE="$enableval" + ;; +esac + +## ---------------------------------------------------------------------- +## Check for system libraries. "dl" stands for dynamically loaded library +## +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ceil in -lm" >&5 +$as_echo_n "checking for ceil in -lm... " >&6; } +if ${ac_cv_lib_m_ceil+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include - #include +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char ceil (); #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -22515,23 +22998,48 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext int main () { -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ - && LITTLE_ENDIAN) - bogus endian macros - #endif - +return ceil (); ; return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_ceil=yes +else + ac_cv_lib_m_ceil=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_ceil" >&5 +$as_echo "$ac_cv_lib_m_ceil" >&6; } +if test "x$ac_cv_lib_m_ceil" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include - #include +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -22543,53 +23051,46 @@ if ac_fn_c_try_compile "$LINENO"; then : int main () { -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - +return dlopen (); ; return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes else - ac_cv_c_bigendian=no + ac_cv_lib_dl_dlopen=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBDL 1 +_ACEOF -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif -#endif -int -main () -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif + LIBS="-ldl $LIBS" - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +fi + + +## ---------------------------------------------------------------------- +## Check for system header files. +## +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include +#include +#include +#include +#include #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 @@ -22602,79 +23103,114 @@ if ac_fn_c_try_compile "$LINENO"; then : int main () { -#ifndef _BIG_ENDIAN - not big endian - #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes + ac_cv_header_stdc=yes else - ac_cv_c_bigendian=no + ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes; then : - # Try to guess by grepping values from an object file. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - extern int foo; +#include -#ifdef FC_DUMMY_MAIN -#ifndef FC_DUMMY_MAIN_EQ_F77 -# ifdef __cplusplus - extern "C" -# endif - int FC_DUMMY_MAIN() { return 1; } -#endif +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { -return use_ascii (foo) == use_ebcdic (foo); - ; + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; return 0; } _ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 +$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } +if ${ac_cv_header_time+:} false; then : + $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default +#include +#include +#include + #ifdef FC_DUMMY_MAIN #ifndef FC_DUMMY_MAIN_EQ_F77 # ifdef __cplusplus @@ -22686,379 +23222,551 @@ $ac_includes_default int main () { - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - +if ((struct tm *) 0) +return 0; ; return 0; } _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_c_bigendian=no +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_time=yes else - ac_cv_c_bigendian=yes + ac_cv_header_time=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 +$as_echo "$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 -$as_echo "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h -;; #( - no) - ;; #( - universal) +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h -$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h +fi - ;; #( - *) - as_fn_error $? "unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; - esac -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of char" >&5 -$as_echo_n "checking size of char... " >&6; } -if ${ac_cv_sizeof_char+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (char))" "ac_cv_sizeof_char" "$ac_includes_default"; then : +## Unix +for ac_header in sys/resource.h sys/time.h unistd.h sys/ioctl.h sys/stat.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -else - if test "$ac_cv_type_char" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (char) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_char=0 - fi fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_char" >&5 -$as_echo "$ac_cv_sizeof_char" >&6; } +done + +for ac_header in sys/socket.h sys/types.h sys/file.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF +fi +done -cat >>confdefs.h <<_ACEOF -#define SIZEOF_CHAR $ac_cv_sizeof_char +for ac_header in stddef.h setjmp.h features.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF +fi -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5 -$as_echo_n "checking size of short... " >&6; } -if ${ac_cv_sizeof_short+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then : +done + +for ac_header in dirent.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "dirent.h" "ac_cv_header_dirent_h" "$ac_includes_default" +if test "x$ac_cv_header_dirent_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DIRENT_H 1 +_ACEOF -else - if test "$ac_cv_type_short" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (short) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_short=0 - fi fi +done + +for ac_header in stdint.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default" +if test "x$ac_cv_header_stdint_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STDINT_H 1 +_ACEOF + C9x=yes fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5 -$as_echo "$ac_cv_sizeof_short" >&6; } +done -cat >>confdefs.h <<_ACEOF -#define SIZEOF_SHORT $ac_cv_sizeof_short +## Darwin +for ac_header in mach/mach_time.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "mach/mach_time.h" "ac_cv_header_mach_mach_time_h" "$ac_includes_default" +if test "x$ac_cv_header_mach_mach_time_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MACH_MACH_TIME_H 1 _ACEOF +fi -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5 -$as_echo_n "checking size of int... " >&6; } -if ${ac_cv_sizeof_int+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then : +done + +## Also need to detect Darwin for pubconf +case $host_os in + darwin*) + +$as_echo "#define HAVE_DARWIN 1" >>confdefs.h + + ;; +esac + +## Windows +case "`uname`" in + CYGWIN*) + for ac_header in io.h sys/timeb.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF -else - if test "$ac_cv_type_int" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (int) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_int=0 - fi fi +done + + ;; + MINGW*) + for ac_header in io.h winsock2.h sys/timeb.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5 -$as_echo "$ac_cv_sizeof_int" >&6; } +done + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lws2_32" >&5 +$as_echo_n "checking for main in -lws2_32... " >&6; } +if ${ac_cv_lib_ws2_32_main+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lws2_32 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -cat >>confdefs.h <<_ACEOF -#define SIZEOF_INT $ac_cv_sizeof_int +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ws2_32_main=yes +else + ac_cv_lib_ws2_32_main=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ws2_32_main" >&5 +$as_echo "$ac_cv_lib_ws2_32_main" >&6; } +if test "x$ac_cv_lib_ws2_32_main" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBWS2_32 1 _ACEOF + LIBS="-lws2_32 $LIBS" -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned" >&5 -$as_echo_n "checking size of unsigned... " >&6; } -if ${ac_cv_sizeof_unsigned+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned))" "ac_cv_sizeof_unsigned" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_unsigned" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (unsigned) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_unsigned=0 - fi fi +ac_cv_lib_ws2_32=ac_cv_lib_ws2_32_main + + ;; + *) + for ac_header in io.h winsock2.h sys/timeb.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned" >&5 -$as_echo "$ac_cv_sizeof_unsigned" >&6; } +done + ;; +esac -cat >>confdefs.h <<_ACEOF -#define SIZEOF_UNSIGNED $ac_cv_sizeof_unsigned -_ACEOF +## ---------------------------------------------------------------------- +## Some platforms require that all symbols are resolved when a library +## is linked. We can use the -no-undefined flag to tell libtool that +## it will be able to build shared libraries on these architectures, +## as it will not do so by default. +## +if test "X${enable_shared}" = "Xyes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool needs -no-undefined flag to build shared libraries" >&5 +$as_echo_n "checking if libtool needs -no-undefined flag to build shared libraries... " >&6; } + case "`uname`" in + CYGWIN*|MINGW*|AIX*) + ## Add in the -no-undefined flag to LDFLAGS for libtool. + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + H5_LDFLAGS="$H5_LDFLAGS -no-undefined" + ;; + *) + ## Don't add in anything. + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi +## ---------------------------------------------------------------------- +## Use the macro _AC_SYS_LARGEFILE_MACRO_VALUE to test defines +## that might need to be set for largefile support to behave +## correctly. This macro is defined in acsite.m4 and overrides +## the version provided by Autoconf (as of v2.65). The custom +## macro additionally adds the appropriate defines to AM_CPPFLAGS +## so that later configure checks have them visible. -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 -$as_echo_n "checking size of long... " >&6; } -if ${ac_cv_sizeof_long+:} false; then : +## Check for _FILE_OFFSET_BITS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } +if ${ac_cv_sys_file_offset_bits+:} false; then : $as_echo_n "(cached) " >&6 else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then : + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -else - if test "$ac_cv_type_long" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (long) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_long=0 - fi + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=no; break fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _FILE_OFFSET_BITS 64 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=64; break fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 -$as_echo "$ac_cv_sizeof_long" >&6; } - - - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_file_offset_bits=unknown + break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 +$as_echo "$ac_cv_sys_file_offset_bits" >&6; } +case $ac_cv_sys_file_offset_bits in #( + no | unknown) ;; + *) cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG $ac_cv_sizeof_long +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits _ACEOF + AM_CPPFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits $AM_CPPFLAGS";; +esac +rm -rf conftest* -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5 -$as_echo_n "checking size of long long... " >&6; } -if ${ac_cv_sizeof_long_long+:} false; then : +## Check for _LARGE_FILES +if test "$ac_cv_sys_file_offset_bits" = unknown; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 +$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } +if ${ac_cv_sys_large_files+:} false; then : $as_echo_n "(cached) " >&6 else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_long_long" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (long long) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_long_long=0 - fi -fi + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=no; break fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5 -$as_echo "$ac_cv_sizeof_long_long" >&6; } - - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _LARGE_FILES 1 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long + ; + return 0; +} _ACEOF - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of __int64" >&5 -$as_echo_n "checking size of __int64... " >&6; } -if ${ac_cv_sizeof___int64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (__int64))" "ac_cv_sizeof___int64" "$ac_includes_default"; then : - -else - if test "$ac_cv_type___int64" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (__int64) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof___int64=0 - fi +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=1; break fi - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_large_files=unknown + break +done fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof___int64" >&5 -$as_echo "$ac_cv_sizeof___int64" >&6; } - - - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 +$as_echo "$ac_cv_sys_large_files" >&6; } +case $ac_cv_sys_large_files in #( + no | unknown) ;; + *) cat >>confdefs.h <<_ACEOF -#define SIZEOF___INT64 $ac_cv_sizeof___int64 +#define _LARGE_FILES $ac_cv_sys_large_files _ACEOF - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of float" >&5 -$as_echo_n "checking size of float... " >&6; } -if ${ac_cv_sizeof_float+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (float))" "ac_cv_sizeof_float" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_float" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (float) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_float=0 - fi + AM_CPPFLAGS="-D_LARGE_FILES=$ac_cv_sys_large_files $AM_CPPFLAGS";; +esac +rm -rf conftest* fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_float" >&5 -$as_echo "$ac_cv_sizeof_float" >&6; } +## ---------------------------------------------------------------------- +## Add necessary defines for Linux Systems. +## +case "$host_cpu-$host_vendor-$host_os" in + *linux*) + ## Make available various LFS-related routines using the following + ## _LARGEFILE*_SOURCE macros. + AM_CPPFLAGS="-D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE $AM_CPPFLAGS" + ## Add POSIX support on Linux systems, so defines + ## __USE_POSIX, which is required to get the prototype for fdopen + ## defined correctly in . + ## + ## This flag was removed from h5cc as of 2009-10-17 when it was found + ## that the flag broke compiling netCDF-4 code with h5cc, but kept in + ## H5_CPPFLAGS because fdopen and HDfdopen fail without it. HDfdopen + ## is used only by H5_debug_mask which is used only when debugging in + ## H5_init_library (all in H5.c). When the flag was removed this was + ## the only compile failure noted. + ## + ## This was originally defined as _POSIX_SOURCE which was updated to + ## _POSIX_C_SOURCE=199506L to expose a greater amount of POSIX + ## functionality so clock_gettime and CLOCK_MONOTONIC are defined + ## correctly. This was later updated to 200112L so that + ## posix_memalign() is visible for the direct VFD code on Linux + ## systems. + ## + ## POSIX feature information can be found in the gcc manual at: + ## http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html +##SCOT H5_CPPFLAGS="-D_POSIX_C_SOURCE=200112L $H5_CPPFLAGS" + ## Need to add this so that O_DIRECT is visible for the direct + ## VFD on Linux systems. + H5_CPPFLAGS="-D_GNU_SOURCE $H5_CPPFLAGS" + ;; +esac -cat >>confdefs.h <<_ACEOF -#define SIZEOF_FLOAT $ac_cv_sizeof_float -_ACEOF +## Need to add the AM_ and H5_ into CFLAGS/CPPFLAGS to make them visible +## for configure checks. +## Note: Both will be restored by the end of configure. +CPPFLAGS="$H5_CPPFLAGS $AM_CPPFLAGS $CPPFLAGS" +CFLAGS="$H5_CFLAGS $AM_CFLAGS $CFLAGS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +off64_t n = 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + for ac_func in lseek64 fseeko64 ftello64 ftruncate64 +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of double" >&5 -$as_echo_n "checking size of double... " >&6; } -if ${ac_cv_sizeof_double+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (double))" "ac_cv_sizeof_double" "$ac_includes_default"; then : +fi +done else - if test "$ac_cv_type_double" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (double) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_double=0 - fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: skipping test for lseek64(), fseeko64 , ftello64, ftruncate64() because off64_t is not defined" >&5 +$as_echo "skipping test for lseek64(), fseeko64 , ftello64, ftruncate64() because off64_t is not defined" >&6; } fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +for ac_func in fseeko ftello +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_double" >&5 -$as_echo "$ac_cv_sizeof_double" >&6; } - +done +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -cat >>confdefs.h <<_ACEOF -#define SIZEOF_DOUBLE $ac_cv_sizeof_double +#include +#include +#ifdef FC_DUMMY_MAIN +#ifndef FC_DUMMY_MAIN_EQ_F77 +# ifdef __cplusplus + extern "C" +# endif + int FC_DUMMY_MAIN() { return 1; } +#endif +#endif +int +main () +{ +struct stat64 sb; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + for ac_func in stat64 fstat64 +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long double" >&5 -$as_echo_n "checking size of long double... " >&6; } -if ${ac_cv_sizeof_long_double+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long double))" "ac_cv_sizeof_long_double" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_long_double" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (long double) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_long_double=0 - fi fi +done +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: skipping test for stat64() and fstat64()" >&5 +$as_echo "skipping test for stat64() and fstat64()" >&6; } fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_double" >&5 -$as_echo "$ac_cv_sizeof_long_double" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double -_ACEOF - - +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ## Checkpoint the cache cat >confcache <<\_ACEOF @@ -26361,13 +27069,13 @@ all_packages="ac,b,b2,d,e,f,g,hg,hl,i,mf,mm,o,p,s,t,v,z" case "X-$DEBUG_PKG" in X-yes) DEBUG_PKG="d,e,f,g,hg,i,mm,o,p,s,t,v,z" - H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" { $as_echo "$as_me:${as_lineno-$LINENO}: result: default ($DEBUG_PKG)" >&5 $as_echo "default ($DEBUG_PKG)" >&6; } ;; X-all) DEBUG_PKG=$all_packages - H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" { $as_echo "$as_me:${as_lineno-$LINENO}: result: all ($DEBUG_PKG)" >&5 $as_echo "all ($DEBUG_PKG)" >&6; } ;; @@ -26375,7 +27083,7 @@ $as_echo "all ($DEBUG_PKG)" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } DEBUG_PKG= - H5_CPPFLAGS="$H5_CPPFLAGS -DNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -DNDEBUG" ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEBUG_PKG" >&5 @@ -30150,7 +30858,7 @@ else fi -ac_config_files="$ac_config_files src/libhdf5.settings Makefile src/Makefile test/Makefile test/testcheck_version.sh test/testerror.sh test/testflushrefresh.sh test/H5srcdir_str.h test/testlibinfo.sh test/testlinks_env.sh test/testswmr.sh test/test_plugin.sh test/test_usecases.sh testpar/Makefile tools/Makefile tools/h5dump/Makefile tools/h5dump/testh5dump.sh tools/h5dump/testh5dumppbits.sh tools/h5dump/testh5dumpxml.sh tools/h5ls/testh5ls.sh tools/h5import/Makefile tools/h5import/h5importtestutil.sh tools/h5diff/Makefile tools/h5diff/testh5diff.sh tools/h5diff/testph5diff.sh tools/h5jam/Makefile tools/h5jam/testh5jam.sh tools/h5repack/Makefile tools/h5repack/h5repack.sh tools/h5repack/h5repack_plugin.sh tools/h5ls/Makefile tools/h5copy/Makefile tools/h5copy/testh5copy.sh tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/misc/testh5clear.sh tools/misc/testh5mkgrp.sh tools/misc/testh5repart.sh tools/h5stat/testh5stat.sh tools/h5stat/Makefile tools/h5format_convert/Makefile tools/h5format_convert/testh5fc.sh tools/perform/Makefile examples/Makefile examples/run-c-ex.sh examples/testh5cc.sh c++/Makefile c++/src/Makefile c++/src/h5c++ c++/test/Makefile c++/test/H5srcdir_str.h c++/examples/Makefile c++/examples/run-c++-ex.sh c++/examples/testh5c++.sh fortran/Makefile fortran/src/h5fc fortran/src/Makefile fortran/test/Makefile fortran/testpar/Makefile fortran/examples/Makefile fortran/examples/run-fortran-ex.sh fortran/examples/testh5fc.sh hl/Makefile hl/src/Makefile hl/test/Makefile hl/test/H5srcdir_str.h hl/tools/Makefile hl/tools/gif2h5/Makefile hl/tools/gif2h5/h52giftest.sh hl/tools/h5watch/Makefile hl/tools/h5watch/testh5watch.sh hl/examples/Makefile hl/examples/run-hlc-ex.sh hl/c++/Makefile hl/c++/src/Makefile hl/c++/test/Makefile hl/c++/examples/Makefile hl/c++/examples/run-hlc++-ex.sh hl/fortran/Makefile hl/fortran/src/Makefile hl/fortran/test/Makefile hl/fortran/examples/Makefile hl/fortran/examples/run-hlfortran-ex.sh" +ac_config_files="$ac_config_files src/libhdf5.settings Makefile src/Makefile test/Makefile test/testcheck_version.sh test/testerror.sh test/testflushrefresh.sh test/H5srcdir_str.h test/testlibinfo.sh test/testlinks_env.sh test/testswmr.sh test/test_plugin.sh test/test_usecases.sh testpar/Makefile tools/Makefile tools/h5dump/Makefile tools/h5dump/testh5dump.sh tools/h5dump/testh5dumppbits.sh tools/h5dump/testh5dumpxml.sh tools/h5ls/testh5ls.sh tools/h5import/Makefile tools/h5import/h5importtestutil.sh tools/h5diff/Makefile tools/h5diff/testh5diff.sh tools/h5diff/testph5diff.sh tools/h5jam/Makefile tools/h5jam/testh5jam.sh tools/h5repack/Makefile tools/h5repack/h5repack.sh tools/h5repack/h5repack_plugin.sh tools/h5ls/Makefile tools/h5copy/Makefile tools/h5copy/testh5copy.sh tools/lib/Makefile tools/misc/Makefile tools/misc/h5cc tools/misc/testh5clear.sh tools/misc/testh5mkgrp.sh tools/misc/testh5repart.sh tools/h5stat/testh5stat.sh tools/h5stat/Makefile tools/h5format_convert/Makefile tools/h5format_convert/testh5fc.sh tools/perform/Makefile examples/Makefile examples/run-c-ex.sh examples/testh5cc.sh c++/Makefile c++/src/Makefile c++/src/h5c++ c++/test/Makefile c++/test/H5srcdir_str.h c++/examples/Makefile c++/examples/run-c++-ex.sh c++/examples/testh5c++.sh fortran/Makefile fortran/src/h5fc fortran/src/Makefile fortran/src/H5fort_type_defines.h fortran/test/Makefile fortran/testpar/Makefile fortran/examples/Makefile fortran/examples/run-fortran-ex.sh fortran/examples/testh5fc.sh hl/Makefile hl/src/Makefile hl/test/Makefile hl/test/H5srcdir_str.h hl/tools/Makefile hl/tools/gif2h5/Makefile hl/tools/gif2h5/h52giftest.sh hl/tools/h5watch/Makefile hl/tools/h5watch/testh5watch.sh hl/examples/Makefile hl/examples/run-hlc-ex.sh hl/c++/Makefile hl/c++/src/Makefile hl/c++/test/Makefile hl/c++/examples/Makefile hl/c++/examples/run-hlc++-ex.sh hl/fortran/Makefile hl/fortran/src/Makefile hl/fortran/test/Makefile hl/fortran/examples/Makefile hl/fortran/examples/run-hlfortran-ex.sh" cat >confcache <<\_ACEOF @@ -30290,26 +30998,7 @@ if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -if test -z "${FORTRAN_HAVE_SIZEOF_TRUE}" && test -z "${FORTRAN_HAVE_SIZEOF_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_HAVE_SIZEOF\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_HAVE_C_SIZEOF_TRUE}" && test -z "${FORTRAN_HAVE_C_SIZEOF_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_HAVE_C_SIZEOF\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_HAVE_STORAGE_SIZE_TRUE}" && test -z "${FORTRAN_HAVE_STORAGE_SIZE_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_HAVE_STORAGE_SIZE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_2003_CONDITIONAL_F_TRUE}" && test -z "${FORTRAN_2003_CONDITIONAL_F_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_2003_CONDITIONAL_F\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${FORTRAN_DEFAULT_REALisDBLE_F_TRUE}" && test -z "${FORTRAN_DEFAULT_REALisDBLE_F_FALSE}"; then - as_fn_error $? "conditional \"FORTRAN_DEFAULT_REALisDBLE_F\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi + if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error $? "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -30322,7 +31011,6 @@ if test -z "${USE_PLUGINS_CONDITIONAL_TRUE}" && test -z "${USE_PLUGINS_CONDITION as_fn_error $? "conditional \"USE_PLUGINS_CONDITIONAL\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi - if test -z "${BUILD_SHARED_SZIP_CONDITIONAL_TRUE}" && test -z "${BUILD_SHARED_SZIP_CONDITIONAL_FALSE}"; then as_fn_error $? "conditional \"BUILD_SHARED_SZIP_CONDITIONAL\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 @@ -31412,6 +32100,7 @@ do "src/H5config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/H5config.h" ;; "pubconf") CONFIG_COMMANDS="$CONFIG_COMMANDS pubconf" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "fortran/src/H5config_f.inc") CONFIG_HEADERS="$CONFIG_HEADERS fortran/src/H5config_f.inc" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "src/libhdf5.settings") CONFIG_FILES="$CONFIG_FILES src/libhdf5.settings" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; @@ -31471,6 +32160,7 @@ do "fortran/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/Makefile" ;; "fortran/src/h5fc") CONFIG_FILES="$CONFIG_FILES fortran/src/h5fc" ;; "fortran/src/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/src/Makefile" ;; + "fortran/src/H5fort_type_defines.h") CONFIG_FILES="$CONFIG_FILES fortran/src/H5fort_type_defines.h" ;; "fortran/test/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/test/Makefile" ;; "fortran/testpar/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/testpar/Makefile" ;; "fortran/examples/Makefile") CONFIG_FILES="$CONFIG_FILES fortran/examples/Makefile" ;; @@ -32202,6 +32892,7 @@ $as_echo X"$file" | done } ;; + "fortran/src/H5config_f.inc":H) cat fortran/src/H5config_f.inc | sed '1d;s%^/\* \(.*\) \*/%\1%;s/#define /#define H5_/;s/#undef /#undef H5_/' >fortran/src/H5config_f.inc.tmp; mv -f fortran/src/H5config_f.inc.tmp fortran/src/H5config_f.inc ;; "libtool":C) # See if we are running on zsh, and set the options which allow our diff --git a/configure.ac b/configure.ac index 938018a..813e24f 100644 --- a/configure.ac +++ b/configure.ac @@ -27,6 +27,17 @@ AC_PREREQ([2.69]) ## release!!! ## AC_INIT([HDF5], [1.9.223-swmr1], [help@hdfgroup.org]) + +## PLACE CHECKS FOR REQUIRED PACKAGES NEEDED TO INSTALL HDF5 AT THE BEGINNING +## -------------------------------------------------------------------------- +## Requirement #1: Check if Perl is installed. +## +AC_SUBST([PERL]) PERL="" +AC_CHECK_PROG([PERL], [perl],, [$PATH]) +if test "x$PERL" = "xfalse"; then + AC_MSG_ERROR([*** Perl is required for installing HDF5, but Perl could not be found!]) +fi + AC_CONFIG_SRCDIR([src/H5.c]) AC_CONFIG_HEADERS([src/H5config.h]) @@ -154,7 +165,6 @@ AC_MSG_RESULT([done]) ## MPE: whether MPE option is enabled. Default no. ## STATIC_EXEC: whether static-exec is enabled. Default no. ## HDF_FORTRAN: whether Fortran is enabled. Default no. -## HDF_FORTRAN2003: whether Fortran 2003 is enabled. Default no. ## FC: Fortran compiler. ## HDF_CXX: whether C++ is enabled. Default no. ## CXX: C++ compiler. @@ -162,6 +172,7 @@ AC_MSG_RESULT([done]) ## INSTRUMENT: whether INSTRUMENT is enabled. No default set here. ## CODESTACK: whether CODESTACK is enabled. Default no. ## HAVE_DMALLOC: whether system has dmalloc support. Default no. +## HAVE_FLOAT128: whether system has Quad-Precision Math Library. Default no. ## DIRECT_VFD: whether DIRECT_VFD is enabled. Default no. ## THREADSAFE: whether THREADSAFE is enabled. Default no. ## STATIC_SHARED: whether static and/or shared libraries are requested. @@ -173,9 +184,7 @@ AC_SUBST([EXTERNAL_FILTERS]) AC_SUBST([MPE]) MPE=no AC_SUBST([STATIC_EXEC]) STATIC_EXEC=no AC_SUBST([HDF_FORTRAN]) HDF_FORTRAN=no -AC_SUBST([HDF_FORTRAN2003]) HDF_FORTRAN2003=no AC_SUBST([FC]) HDF_FORTRAN=no -AC_SUBST([FC2003]) HDF_FORTRAN2003=no AC_SUBST([HDF_CXX]) HDF_CXX=no AC_SUBST([CXX]) HDF_CXX=no AC_SUBST([HDF5_HL]) HDF5_HL=yes @@ -188,6 +197,7 @@ AC_SUBST([STATIC_SHARED]) AC_SUBST([enable_shared]) AC_SUBST([enable_static]) AC_SUBST([UNAME_INFO]) UNAME_INFO=`uname -a` +AC_SUBST([PAC_C_MAX_REAL_PRECISION]) ## ---------------------------------------------------------------------- ## Some platforms have broken basename, and/or xargs programs. Check @@ -346,13 +356,57 @@ case "X-$ALLOW_UNSUPPORTED" in esac ## ---------------------------------------------------------------------- +## Data types and their sizes. +## +AC_TYPE_OFF_T +AC_CHECK_TYPE([size_t], [], + [AC_DEFINE_UNQUOTED([size_t], [unsigned long], + [Define to `unsigned long' if does not define.])]) +AC_CHECK_TYPE([ssize_t], [], + [AC_DEFINE_UNQUOTED([ssize_t], [long], + [Define to `long' if does not define.])]) +AC_CHECK_TYPE([ptrdiff_t], [], + [AC_DEFINE_UNQUOTED([ptrdiff_t], [long], + [Define to `long' if does not define.])]) +AC_C_BIGENDIAN +AC_CHECK_SIZEOF([char], [1]) +AC_CHECK_SIZEOF([short], [2]) +AC_CHECK_SIZEOF([int], [4]) +AC_CHECK_SIZEOF([unsigned], [4]) +AC_CHECK_SIZEOF([long], [4]) +AC_CHECK_SIZEOF([long long], [8]) +AC_CHECK_SIZEOF([__int64], [8]) +AC_CHECK_SIZEOF([float], [4]) +AC_CHECK_SIZEOF([double], [8]) +AC_CHECK_SIZEOF([long double], [8]) + +## Check for non-standard extenstion __FLOAT128 +HAVE_FLOAT128=0 +HAVE_QUADMATH=0 +FLT128_DIG=0 +LDBL_DIG=0 + +AC_CHECK_SIZEOF([__float128]) +AC_CHECK_SIZEOF([_Quad]) +AC_CHECK_HEADERS([quadmath.h], [HAVE_QUADMATH=1], []) +PAC_FC_LDBL_DIG + +if test "$ac_cv_sizeof___float128" != 0 && test "$FLT128_DIG" != 0 ; then + AC_DEFINE([HAVE_FLOAT128], [1], [Determine if __float128 is available]) + PAC_C_MAX_REAL_PRECISION=$FLT128_DIG +else + PAC_C_MAX_REAL_PRECISION=$LDBL_DIG +fi +AC_DEFINE_UNQUOTED([PAC_C_MAX_REAL_PRECISION], $PAC_C_MAX_REAL_PRECISION, [Determine the maximum decimal precision in C]) +AC_MSG_RESULT([$PAC_C_MAX_REAL_PRECISION]) +## ---------------------------------------------------------------------- ## Check if they would like the Fortran interface compiled ## AC_SUBST([HDF5_INTERFACES]) HDF5_INTERFACES="" AC_MSG_CHECKING([if Fortran interface enabled]) AC_ARG_ENABLE([fortran], [AS_HELP_STRING([--enable-fortran], - [Compile the Fortran 90/95 interface [default=no]])], + [Compile the Fortran interface [default=no]])], [HDF_FORTRAN=$enableval]) if test "X$HDF_FORTRAN" = "Xyes"; then @@ -361,35 +415,16 @@ else echo "no" fi - -## ---------------------------------------------------------------------- -## Check if they would like the Fortran 2003 interface compiled -## -AC_MSG_CHECKING([if Fortran 2003 interface enabled]) -AC_ARG_ENABLE([fortran2003], - [AS_HELP_STRING([--enable-fortran2003], - [Compile the Fortran 2003 interface, must also specify --enable-fortran [default=no]])], - [HDF_FORTRAN2003=$enableval]) - -## ---------------------------------------------------------------------- -## Check to make sure --enable-fortran is present if --enable-fortran2003 -## was specified - -if test "X$HDF_FORTRAN2003" = "Xyes" && test "X$HDF_FORTRAN" = "Xno"; then - echo "no" - AC_MSG_ERROR([--enable-fortran must be used with --enable-fortran2003]) -else - if test "X$HDF_FORTRAN2003" = "Xyes" && test "X$HDF_FORTRAN" = "Xyes"; then - echo "yes" - else - echo "no" - fi -fi - if test "X$HDF_FORTRAN" = "Xyes"; then +## We will output an include file for Fortran, H5config_f.inc which +## contains various configure definitions used by the Fortran Library. +## Prepend H5_ to all macro names. This avoids name conflict between HDF5 macro +## names and those generated by another software package that uses the HDF5 library. + AC_CONFIG_HEADERS([fortran/src/H5config_f.inc], + [cat fortran/src/H5config_f.inc | sed '1d;s%^/\* \(.*\) \*/%\1%;s/#define /#define H5_/;s/#undef /#undef H5_/' >fortran/src/H5config_f.inc.tmp; mv -f fortran/src/H5config_f.inc.tmp fortran/src/H5config_f.inc]) + AC_SUBST([FC]) HDF_FORTRAN=yes - AC_SUBST([HAVE_FORTRAN_2003]) HDF5_INTERFACES="$HDF5_INTERFACES fortran" @@ -422,6 +457,14 @@ if test "X$HDF_FORTRAN" = "Xyes"; then ## Change to the Fortran 90 language AC_LANG_PUSH(Fortran) + ## Checking if the compiler supports the required Fortran 2003 features and + ## stopping if it does not. + PAC_PROG_FC_HAVE_F2003_REQUIREMENTS + + if test "X$HAVE_F2003_REQUIREMENTS" = "Xno"; then + AC_MSG_ERROR([Fortran compiler lacks required Fortran 2003 features; unsupported Fortran 2003 compiler, remove --enable-fortran]) + fi + ## -------------------------------------------------------------------- ## Define wrappers for the C compiler to use Fortran function names ## @@ -433,39 +476,138 @@ if test "X$HDF_FORTRAN" = "Xyes"; then ## See if the fortran compiler supports the intrinsic function "C_SIZEOF" PAC_PROG_FC_C_SIZEOF - + ## See if the fortran compiler supports the intrinsic function "STORAGE_SIZE" - PAC_PROG_FC_STORAGE_SIZE + PAC_PROG_FC_STORAGE_SIZE + + ## Set the sizeof function for use later in the fortran tests + if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes";then + FC_SIZEOF_A="STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + FC_SIZEOF_B="STORAGE_SIZE(b, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + FC_SIZEOF_C="STORAGE_SIZE(c, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" + else + if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes";then + FC_SIZEOF_A="SIZEOF(a)" + FC_SIZEOF_B="SIZEOF(b)" + FC_SIZEOF_C="SIZEOF(c)" + else + ## If neither intrinsic functions SIZEOF or STORAGE_SIZE is available then stop configure with an error + AC_MSG_ERROR([Fortran compiler requires either intrinsic functions SIZEOF or STORAGE_SIZE]) + fi + fi - ## Check to see if -r8 was specified to determine if we need to - ## compile the DOUBLE PRECISION interfaces. - PAC_PROG_FC_DEFAULT_REALisDBLE + ## See if the fortran compiler supports the intrinsic module "ISO_FORTRAN_ENV" + PAC_PROG_FC_ISO_FORTRAN_ENV + ## Check KIND and size of native integer + PAC_FC_NATIVE_INTEGER + + ## Find all available KINDs + PAC_FC_AVAIL_KINDS + ## Find all sizeofs for available KINDs + PAC_FC_SIZEOF_INT_KINDS + PAC_FC_SIZEOF_REAL_KINDS + + AC_SUBST([PAC_FC_ALL_REAL_KINDS]) + AC_SUBST([PAC_FC_MAX_REAL_PRECISION]) + AC_SUBST([PAC_FC_ALL_INTEGER_KINDS]) + AC_SUBST([PAC_FC_ALL_REAL_KINDS_SIZEOF]) + AC_SUBST([PAC_FC_ALL_INTEGER_KINDS_SIZEOF]) + AC_SUBST([PAC_FORTRAN_NATIVE_INTEGER_KIND]) + AC_SUBST([PAC_FORTRAN_NATIVE_INTEGER_SIZEOF]) + AC_SUBST([PAC_FORTRAN_NATIVE_REAL_KIND]) + AC_SUBST([PAC_FORTRAN_NATIVE_REAL_SIZEOF]) + AC_SUBST([PAC_FORTRAN_NATIVE_DOUBLE_KIND]) + AC_SUBST([PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF]) + AC_SUBST([HAVE_Fortran_INTEGER_SIZEOF_16]) + AC_SUBST([FORTRAN_HAVE_C_LONG_DOUBLE]) + AC_SUBST([FORTRAN_C_LONG_DOUBLE_IS_UNIQUE]) + AC_SUBST([FORTRAN_SIZEOF_LONG_DOUBLE]) + AC_SUBST([H5CONFIG_F_NUM_RKIND]) + AC_SUBST([H5CONFIG_F_RKIND]) + AC_SUBST([H5CONFIG_F_RKIND_SIZEOF]) + AC_SUBST([H5CONFIG_F_NUM_IKIND]) + AC_SUBST([H5CONFIG_F_IKIND]) + + ## Setting definition if there is a 16 byte fortran integer + if `echo $PAC_FC_ALL_INTEGER_KINDS_SIZEOF | grep '16' >/dev/null`; then + HAVE_Fortran_INTEGER_SIZEOF_16="1" + AC_DEFINE([HAVE_Fortran_INTEGER_SIZEOF_16], [1], [Determine if INTEGER*16 is available]) + else + HAVE_Fortran_INTEGER_SIZEOF_16="0" + AC_DEFINE([HAVE_Fortran_INTEGER_SIZEOF_16], [0], [Determine if INTEGER*16 is available]) + fi - if test "X$HDF_FORTRAN2003" = "Xyes"; then + if test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes"; then + AC_DEFINE([FORTRAN_HAVE_STORAGE_SIZE], [1], [Define if we have Fortran intrinsic STORAGE_SIZE]) + fi - ## Checking if the compiler supports the required Fortran 2003 features and - ## disable Fortran 2003 if it does not. - PAC_PROG_FC_HAVE_F2003_REQUIREMENTS - - if test "X$HAVE_F2003_REQUIREMENTS" = "Xno"; then - AC_MSG_ERROR([Fortran compiler lacks required Fortran 2003 features; unsupported Fortran 2003 compiler, remove --enable-fortran2003]) + if test "X$HAVE_C_SIZEOF_FORTRAN" = "Xyes"; then + AC_DEFINE([FORTRAN_HAVE_C_SIZEOF], [1], [Define if we have Fortran intrinsic C_SIZEOF]) + fi + + if test "X$HAVE_SIZEOF_FORTRAN" = "Xyes"; then + AC_DEFINE([FORTRAN_HAVE_SIZEOF], [1], [Define if we have Fortran intrinsic SIZEOF]) + fi + + ## See if C_LONG_DOUBLE is available + PAC_PROG_FC_HAVE_C_LONG_DOUBLE + + FORTRAN_HAVE_C_LONG_DOUBLE="0" + if test "X$HAVE_C_LONG_DOUBLE_FORTRAN" = "Xyes"; then + FORTRAN_HAVE_C_LONG_DOUBLE="1" + AC_DEFINE([FORTRAN_HAVE_C_LONG_DOUBLE], [1], [Define if we have Fortran C_LONG_DOUBLE]) + fi + + ## Is C_LONG_DOUBLE different from C_DOUBLE + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0" + if test "X$FORTRAN_HAVE_C_LONG_DOUBLE"; then + PAC_PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE + if test "X$C_LONG_DOUBLE_IS_UNIQUE_FORTRAN" = "Xyes"; then + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="1" + AC_DEFINE([FORTRAN_C_LONG_DOUBLE_IS_UNIQUE], [1], [Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE]) else - HAVE_FORTRAN_2003="yes" + FORTRAN_C_LONG_DOUBLE_IS_UNIQUE="0" + fi + fi + + FORTRAN_SIZEOF_LONG_DOUBLE=${ac_cv_sizeof_long_double} + AC_DEFINE_UNQUOTED([FORTRAN_SIZEOF_LONG_DOUBLE], ["${ac_cv_sizeof_long_double}"], [Determine the size of C long double]) + + + dnl get the largest sizeof for REAL kinds + + max_real_fortran_sizeof="`echo \"[$]PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -ne '/,(\d+)\}/; print $1'`" + max_real_fortran_kind="`echo \"[$]PAC_FC_ALL_REAL_KINDS\" | perl -ne '/,(\d+)\}/; print $1'`" + + dnl remove the invalid kind from the list + if test "$ac_cv_sizeof___float128" != 0;then + if test "$ac_cv_sizeof___float128" != "$max_real_fortran_sizeof" && test "${ac_cv_sizeof_long_double}" != "$max_real_fortran_sizeof"; then + AC_MSG_WARN([ + Fortran REAL(KIND=$max_real_fortran_kind) is $max_real_fortran_sizeof Bytes, but no corresponding C float type exists of that size + !!! Fortran interfaces will not be generated for REAL(KIND=$max_real_fortran_kind) !!! + ]) + PAC_FC_ALL_REAL_KINDS="`echo \"[$]PAC_FC_ALL_REAL_KINDS\" | perl -pe 's/,\d+}/}/g;'`" + PAC_FC_ALL_REAL_KINDS_SIZEOF="`echo \"[$]PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -pe 's/,\d+}/}/g;'`" fi fi + AC_MSG_CHECKING([for Fortran interoperable KINDS with C]) + AC_MSG_RESULT([$PAC_FC_ALL_REAL_KINDS]) + + dnl count the number of real kinds + H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `echo \"[$]PAC_FC_ALL_REAL_KINDS\" | perl -e '$count = ( =~ tr/,//);print $count+1'`" + H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo \"[$]PAC_FC_ALL_REAL_KINDS\" | perl -pe 's/{//g' | perl -pe 's/}//g' | perl -pe 's/ /,/g'`/)" + H5CONFIG_F_RKIND_SIZEOF="INTEGER, DIMENSION(1:num_rkinds) :: rkind_sizeof = (/`echo \"[$]PAC_FC_ALL_REAL_KINDS_SIZEOF\" | perl -pe 's/{//g' | perl -pe 's/}//g'| perl -pe 's/ /,/g'`/)" + + AC_DEFINE_UNQUOTED([H5CONFIG_F_NUM_RKIND], $H5CONFIG_F_NUM_RKIND, [Define number of valid Fortran REAL KINDs]) + AC_DEFINE_UNQUOTED([H5CONFIG_F_RKIND], $H5CONFIG_F_RKIND, [Define valid Fortran REAL KINDs]) + AC_DEFINE_UNQUOTED([H5CONFIG_F_RKIND_SIZEOF], $H5CONFIG_F_RKIND_SIZEOF, [Define valid Fortran REAL KINDs Sizeof]) + +## Change back to the C language + AC_LANG_POP(Fortran) else FC="no" fi -## Change back to the C language -AC_LANG_POP(Fortran) - -AM_CONDITIONAL([FORTRAN_HAVE_SIZEOF], [test "X$HAVE_SIZEOF_FORTRAN" = "Xyes"]) -AM_CONDITIONAL([FORTRAN_HAVE_C_SIZEOF], [test "X$HAVE_C_SIZEOF_FORTRAN" = "Xyes"]) -AM_CONDITIONAL([FORTRAN_HAVE_STORAGE_SIZE], [test "X$HAVE_STORAGE_SIZE_FORTRAN" = "Xyes"]) -AM_CONDITIONAL([FORTRAN_2003_CONDITIONAL_F], [test "X$HAVE_FORTRAN_2003" = "Xyes"]) -AM_CONDITIONAL([FORTRAN_DEFAULT_REALisDBLE_F], [test "X$FORTRAN_DEFAULT_REALisDBLE" = "Xyes"]) - ## ---------------------------------------------------------------------- ## Check if they would like the C++ interface compiled ## @@ -529,27 +671,12 @@ if test "X$HDF5_HL" = "Xyes"; then HL="hl" AC_DEFINE([INCLUDE_HL], [1], [Define if HDF5's high-level library headers should be included in hdf5.h]) - - ## If Fortran's default real is double precision and HL is being built then configure - ## should fail due to bug HDFFV-889. - if test "X$FORTRAN_DEFAULT_REALisDBLE" = "Xyes"; then - AC_MSG_ERROR([Fortran high-level routines are not supported when the default REAL is DOUBLE PRECISION, use configure option --disable-hl.]) - fi else echo "no" fi ## ---------------------------------------------------------------------- -## Check if they have Perl installed on their system. We only need Perl -## if they're using a GNU compiler. -## -AC_SUBST([PERL]) PERL="" -if test "X$GCC" = "Xyes"; then - AC_CHECK_PROGS([PERL], [perl],, [$PATH]) -fi - -## ---------------------------------------------------------------------- ## Check which archiving tool to use. This needs to be done before ## the AM_PROG_LIBTOOL macro. ## @@ -950,7 +1077,7 @@ case "$host_cpu-$host_vendor-$host_os" in ## ## POSIX feature information can be found in the gcc manual at: ## http://www.gnu.org/s/libc/manual/html_node/Feature-Test-Macros.html - H5_CPPFLAGS="-D_POSIX_C_SOURCE=200112L $H5_CPPFLAGS" +##SCOT H5_CPPFLAGS="-D_POSIX_C_SOURCE=200112L $H5_CPPFLAGS" ## Need to add this so that O_DIRECT is visible for the direct ## VFD on Linux systems. @@ -976,31 +1103,6 @@ AC_TRY_COMPILE([ [AC_CHECK_FUNCS([stat64 fstat64])], [AC_MSG_RESULT([skipping test for stat64() and fstat64()])]) -## ---------------------------------------------------------------------- -## Data types and their sizes. -## -AC_TYPE_OFF_T -AC_CHECK_TYPE([size_t], [], - [AC_DEFINE_UNQUOTED([size_t], [unsigned long], - [Define to `unsigned long' if does not define.])]) -AC_CHECK_TYPE([ssize_t], [], - [AC_DEFINE_UNQUOTED([ssize_t], [long], - [Define to `long' if does not define.])]) -AC_CHECK_TYPE([ptrdiff_t], [], - [AC_DEFINE_UNQUOTED([ptrdiff_t], [long], - [Define to `long' if does not define.])]) -AC_C_BIGENDIAN -AC_CHECK_SIZEOF([char], [1]) -AC_CHECK_SIZEOF([short], [2]) -AC_CHECK_SIZEOF([int], [4]) -AC_CHECK_SIZEOF([unsigned], [4]) -AC_CHECK_SIZEOF([long], [4]) -AC_CHECK_SIZEOF([long long], [8]) -AC_CHECK_SIZEOF([__int64], [8]) -AC_CHECK_SIZEOF([float], [4]) -AC_CHECK_SIZEOF([double], [8]) -AC_CHECK_SIZEOF([long double], [8]) - ## Checkpoint the cache AC_CACHE_SAVE @@ -1774,18 +1876,18 @@ all_packages="ac,b,b2,d,e,f,g,hg,hl,i,mf,mm,o,p,s,t,v,z" case "X-$DEBUG_PKG" in X-yes) DEBUG_PKG="d,e,f,g,hg,i,mm,o,p,s,t,v,z" - H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" AC_MSG_RESULT([default ($DEBUG_PKG)]) ;; X-all) DEBUG_PKG=$all_packages - H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -UNDEBUG" AC_MSG_RESULT([all ($DEBUG_PKG)]) ;; X-no|X-none) AC_MSG_RESULT([none]) DEBUG_PKG= - H5_CPPFLAGS="$H5_CPPFLAGS -DNDEBUG" +## H5_CPPFLAGS="$H5_CPPFLAGS -DNDEBUG" ;; *) AC_MSG_RESULT([$DEBUG_PKG]) @@ -3016,6 +3118,7 @@ AC_CONFIG_FILES([src/libhdf5.settings fortran/Makefile fortran/src/h5fc fortran/src/Makefile + fortran/src/H5fort_type_defines.h fortran/test/Makefile fortran/testpar/Makefile fortran/examples/Makefile diff --git a/examples/Makefile.in b/examples/Makefile.in index 5d76be3..79232ae 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in @@ -112,7 +112,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-c-ex.sh testh5cc.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -396,14 +397,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -413,13 +421,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -461,6 +468,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/fortran/Makefile.in b/fortran/Makefile.in index 55ede05..8585623 100644 --- a/fortran/Makefile.in +++ b/fortran/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -452,14 +453,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -469,13 +477,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -517,6 +524,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/fortran/doc/DevelGuide/masterindex.html b/fortran/doc/DevelGuide/masterindex.html deleted file mode 100644 index 9765ea0..0000000 --- a/fortran/doc/DevelGuide/masterindex.html +++ /dev/null @@ -1,589 +0,0 @@ - - - - - - - -Index - - - - -
-
- -
-

Index

-

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

- h5pget_double - h5pget_hyper_vector_size_f - h5pset_family_offset_f - h5pset_fapl_family_f - h5pset_meta_block_size_f -

F

fflush1.f90 -fflush2.f90 -fortran/test/fflush1.f90 -fortran/test/fflush2.f90 -fortran/test/fortranlib_test.f90 -fortran/test/fortranlib_test_1_8.f90 -fortran/test/fortranlib_test_F03.f90 -fortran/test/tc.c -fortran/test/tf.f90 -fortran/test/tH5A.f90 -fortran/test/tH5A_1_8.f90 -fortran/test/tH5D.f90 -fortran/test/tH5E.f90 -fortran/test/tH5E_F03.f90 -fortran/test/tH5F.f90 -fortran/test/tH5G.f90 -fortran/test/tH5G_1_8.f90 -fortran/test/tH5I.f90 -fortran/test/tH5L_F03.f90 -fortran/test/tH5O.f90 -fortran/test/tH5P.f90 -fortran/test/tH5P_F03.f90 -fortran/test/tH5R.f90 -fortran/test/tH5S.f90 -fortran/test/tH5Sselect.f90 -fortran/test/tH5T.f90 -fortran/test/tH5T_F03.f90 -fortran/test/tH5VL.f90 -fortran/test/tH5Z.f90 -fortranlib_test.f90 -fortranlib_test_1_8.f90 -fortranlib_test_F03.f90 -

H

H5_DBLE_InterfaceExclude.f90 -H5_DBLE_InterfaceInclude.f90 -H5_ff.f90 -H5_ff_F03.f90 -H5_ff_F90.f90 -H5A -H5A (F03) -H5A (F90) -h5aclose_f -h5acreate_by_name_f -h5acreate_f -h5adelete_by_idx_f -h5adelete_by_name_f -h5adelete_f -H5Aexists_by_name_f -H5Aexists_f -H5Af -H5Af.c -H5Aff.f90 -H5Aff_F03.f90 -H5Aff_F90.f90 -h5aget_create_plist_f -h5aget_info_by_idx_f -h5aget_info_by_name_f -h5aget_info_f -h5aget_name_by_idx_f -h5aget_name_f -h5aget_num_attrs_f -h5aget_space_f -h5aget_storage_size_f -h5aget_type_f -h5aopen_by_idx_f -H5Aopen_by_name_f -h5aopen_f -h5aopen_idx_f -h5aopen_name_f -h5aread_f -h5arename_by_name_f -h5arename_f -h5check_version_f -h5close_f -H5D -H5D (F03) -H5D (F90) -h5dclose_f -h5dcreate_anon_f -h5dcreate_f -H5Df -H5Df.c -H5Dff.f90 -H5Dff_F03.f90 -H5Dff_F90.f90 -h5dget_access_plist_f -h5dget_create_plist_f -h5dget_space_f -h5dget_space_status_f -h5dget_storage_size_f -h5dget_type_f -h5dont_atexit_f -h5dopen_f -h5dread_f -h5dset_extent -h5dvlen_get_max_len_f -h5dvlen_reclaim -H5E -H5E (F03) -H5E (F90) -h5eclear_f -H5Ef -H5Ef.c -H5Eff.f90 -H5Eff_F03.f90 -H5Eff_F90.f90 -h5eget_auto_f -h5eget_major_f -h5eget_minor_f -h5eprint_f -h5eset_auto2_f -h5eset_auto_f -H5F -H5f90global.f90 -H5f90kit -H5f90kit.c -h5fclose_f -h5fcreate_f -H5FDMPIO -H5FDmpiof -H5FDmpiof.c -H5FDmpioff.f90 -H5Ff -H5Ff.c -H5Fff.f90 -h5fflush_f -h5fget_access_plist_f -h5fget_create_plist_f -h5fget_filesize_f -h5fget_freespace_f -h5fget_name_f -h5fget_obj_count_f -h5fget_obj_ids_f -h5fis_hdf5_f -h5fmount_f -h5fopen_f -h5freopen_f -h5funmount_f -H5G -h5garbage_collect_f -h5gclose_f -H5Gcreate_anon_f -h5gcreate_f -h5get_libversion_f -H5Gf -H5Gf.c -H5Gff.f90 -h5gget_comment_f -H5Gget_create_plist_f -h5gget_info_by_idx_f -h5gget_info_by_name_f -h5gget_info_f -h5gget_linkval_f -h5gget_obj_info_idx_f -h5glink2_f -h5glink_f -H5GLOBAL -h5gmove2_f -h5gmove_f -h5gn_members_f -h5gopen_f -h5gset_comment_f -h5gunlink_f -H5I -h5idec_ref_f -H5If -H5If.c -H5Iff.f90 -h5iget_file_id_f -h5iget_name_f -h5iget_ref_f -h5iget_type_f -h5iinc_ref_f -h5iis_valid_f -h5kind_to_type -H5L -H5L (F03) -H5L (F90) -h5lcopy_f -H5Lcreate_external_f -H5Lcreate_hard_f -H5Lcreate_soft_f -h5ldelete_by_idx_f -h5ldelete_f -H5Lexists_f -H5Lf -H5Lf.c -H5Lff.f90 -H5Lff_F03.f90 -H5Lff_F90.f90 -h5lget_info_by_idx_f -h5lget_info_f -h5lget_name_by_idx_f -H5LIB -H5LIB_PROVISIONAL -H5LIB_PROVISIONAL (F90) -h5lis_registered_f -h5literate_by_name_f -h5literate_f -h5lmove_f -H5match_types -H5match_types.c -H5O -H5O (F03) -H5O (F90) -h5oclose_f -H5Of -H5Of.c -H5Off.f90 -H5Off_F03.f90 -H5Off_F90.f90 -h5offsetof -h5olink_f -h5oopen_f -h5open_by_addr_f -h5open_f -h5ovisit_f -H5P (_F90) -H5P (F03) -H5P (F90) -h5pall_filters_avail_f -h5pclose_class_f -h5pclose_f -h5pcopy_f -h5pcopy_prop_f -h5pcreate_class_f -h5pcreate_class_f -h5pcreate_f -h5pequal_f -h5pexist_f -H5Pf -H5Pf.c -H5Pff.f90 -H5Pff_F03.f90 -H5Pff_F90.f90 -h5pfill_value_defined_f -h5pget_alignment_f -h5pget_alloc_time_f -H5Pget_attr_creation_order_f -H5Pget_attr_phase_change_f -h5pget_btree_ratios_f -h5pget_buffer_f -h5pget_cache_f -h5pget_char -h5pget_char -H5Pget_char_encoding_f -H5Pget_chunk_cache_f -h5pget_chunk_f -h5pget_class_f -h5pget_class_name_f -h5pget_class_parent_f -h5pget_copy_object_f -H5Pget_create_inter_group_f -h5pget_data_transform_f -h5pget_double -h5pget_driver_f -h5pget_dxpl_mpio_f -h5pget_edc_check_f -H5Pget_est_link_info_f -h5pget_external_count_f -h5pget_external_f -h5pget_fapl_core_f -h5pget_fapl_direct_f -h5pget_fapl_family_f -h5pget_fapl_mpio_f -h5pget_fapl_mpiposix_f -h5pget_fapl_multi_f -h5pget_fclose_degree_f -h5pget_fill_time_f -h5pget_filter_by_id_f -h5pget_filter_f -h5pget_gc_references_f -h5pget_integer -h5pget_integer -h5pget_istore_k_f -h5pget_layout_f -H5Pget_link_creation_order_f -H5Pget_link_phase_change_f -H5Pget_local_heap_size_hint_f -h5pget_meta_block_size_f -h5pget_nfilters_f -h5pget_nlinks_f -h5pget_npros_f -H5Pget_obj_track_times_f -h5pget_preserve_f -h5pget_real -h5pget_real -h5pget_sec2_f -h5pget_sieve_buf_size_f -h5pget_size_f -h5pget_sizes_f -h5pget_small_data_block_size_f -h5pget_split_f -h5pget_stdio_f -h5pget_sym_k_f -h5pget_userblock_f -h5pget_version_f -h5pinsert_char -h5pinsert_char -h5pinsert_double -h5pinsert_double -h5pinsert_integer -h5pinsert_integer -h5pinsert_ptr -h5pinsert_real -h5pinsert_real -h5pisa_class_f -h5pmodify_filter_f -h5pregister_char -h5pregister_char -h5pregister_double -h5pregister_double -h5pregister_integer -h5pregister_integer -h5pregister_ptr -h5pregister_real -h5pregister_real -h5premove_f -h5premove_filter_f -h5pset(get)fill_value_f -h5pset(get)fill_value_f -h5pset_alignment_f -h5pset_alloc_time_f -H5Pset_attr_creation_order_f -H5Pset_attr_phase_change_f -h5pset_btree_ratios_f -h5pset_buffer_f -h5pset_cache_f -h5pset_char -h5pset_char -H5Pset_char_encoding_f -H5Pset_chunk_cache_f -h5pset_chunk_f -h5pset_copy_object_f -H5Pset_create_inter_group_f -h5pset_data_transform_f -h5pset_deflate_f -h5pset_double -h5pset_double -h5pset_dxpl_mpio_f -h5pset_edc_check_f -h5pset_est_link_info_f -h5pset_external_f -h5pset_fapl_core_f -h5pset_fapl_direct_f -h5pset_fapl_mpio_f -h5pset_fapl_mpiposix_f -h5pset_fapl_multi_l -h5pset_fapl_multi_s -h5pset_fapl_sec2_f -h5pset_fapl_split_f -h5pset_fapl_stdio_f -h5pset_fclose_degree_f -h5pset_fill_time_f -h5pset_filter_f -h5pset_fletcher32_f -h5pset_gc_references_f -h5pset_hyper_vector_size_f -h5pset_integer -h5pset_integer -h5pset_istore_k_f -h5pset_layout_f -H5Pset_libver_bounds_f -H5Pset_link_creation_order_f -h5pset_link_phase_change_f -H5Pset_local_heap_size_hint_f -H5Pset_nbit_f -h5pset_nlinks_f -H5Pset_obj_track_times_f -h5pset_preserve_f -h5pset_real -h5pset_real -h5pset_scaleoffset_f -H5Pset_shared_mesg_index_f -H5Pset_shared_mesg_nindexes_f -h5pset_shuffle_f -h5pset_sieve_buf_size_f -h5pset_sizes_f -h5pset_small_data_block_size_f -h5pset_sym_k_f -h5pset_szip_f -h5pset_userblock_f -h5punregister_f -H5R -H5R (F03) -H5R (F90) -h5rcreate_object_f -h5rcreate_object_f -h5rcreate_ptr_f -h5rcreate_region_f -h5rcreate_region_f -h5rdereference_object_f -h5rdereference_object_f -h5rdereference_ptr_f -h5rdereference_region_f -h5rdereference_region_f -H5Rf -H5Rf.c -H5Rff.f90 -H5Rff_F03.f90 -H5Rff_F90.f90 -h5rget_name_object_f -h5rget_name_object_f -h5rget_name_ptr_f -h5rget_name_region_f -h5rget_name_region_f -h5rget_obj_type_f -h5rget_object_type_obj_f -h5rget_region_region_f -H5S -h5sclose_f -h5scopy_f -h5screate_f -h5screate_simple_f -H5Sdecode_f -H5Sencode_f -h5sextent_copy_f -h5sextent_equal_f -H5Sf -H5Sf.c -H5Sff.f90 -h5sget_select_bounds_f -h5sget_select_elem_npoints_f -h5sget_select_elem_pointlist_f -h5sget_select_hyper_blocklist_f -h5sget_select_hyper_nblocks_f -h5sget_select_npoints_f -h5sget_select_type_f -h5sget_simple_extent_dims_f -h5sget_simple_extent_ndims_f -h5sget_simple_extent_npoints_f -h5sget_simple_extent_type_f -h5sis_simple_f -h5soffset_simple_f -h5sselect_all_f -h5sselect_elements_f -h5sselect_hyperslab_f -h5sselect_none_f -h5sselect_valid_f -h5sset_extent_none_f -h5sset_extent_simple_f -H5T -H5T (F03) -H5T (F90) -h5tarray_create_f -h5tclose_f -h5tcommit_anon_f -h5tcommit_f -h5tcommitted_f -h5tcompiler_conv_f -H5Tconvert_f -h5tcopy_f -h5tcreate_f -H5Tdecode_f -h5tenaum_insert_f -H5Tencode_f -h5tenum_create_f -h5tenum_nameof_f -h5tenum_valuof_f -h5tequal_f -H5test_kind -H5test_kind.f90 -H5test_kind_SIZEOF -H5test_kind_SIZEOF.f90 -H5Tf -H5Tf.c -H5Tff.f90 -H5Tff_F03.f90 -H5Tff_F90.f90 -h5tget_array_dims_f -h5tget_array_ndims_f -h5tget_class_f -h5tget_create_plist_f -h5tget_cset_f -h5tget_ebias_f -h5tget_fields_f -h5tget_inpad_f -h5tget_member_class_f -h5tget_member_index_f -h5tget_member_name_f -h5tget_member_offset_f -h5tget_member_type_f -h5tget_member_value_f -h5tget_native_type_f -h5tget_nmembers_f -h5tget_norm_f -h5tget_offset_f -h5tget_order_f -h5tget_pad_f -h5tget_precision_f -h5tget_sign_f -h5tget_size_f -h5tget_strpad_f -h5tget_super_f -h5tget_tag_f -h5tinsert_f -h5tis_variable_str_f -h5topen_f -h5tpack_f -h5tset_cset_f -h5tset_ebias_f -h5tset_fields_f -h5tset_inpad_f -h5tset_norm_f -h5tset_offset_f -h5tset_order_f -h5tset_pad_f -h5tset_precision_f -h5tset_sign_f -h5tset_size_f -h5tset_strpad_f -h5tset_tag_f -h5tvlen_create_f -H5Z -H5Zf -H5Zf.c -H5Zff.f90 -h5zfilter_avail_f -h5zget_filter_info_f -h5zunregister_f -HDF5 -HDF5 (mpio) -HDF5.f90 -HDF5mpio.f90 -

S

src/H5_DBLE_InterfaceExclude.f90 -src/H5_DBLE_InterfaceInclude.f90 -

T

t.c -tf.f90 -tH5A.f90 -tH5A_1_8.f90 -tH5D.f90 -tH5E.f90 -tH5E_F03.f90 -tH5F.f90 -tH5G.f90 -tH5G_1_8.f90 -tH5I.f90 -tH5L_F03.f90 -tH5O.f90 -tH5P.f90 -tH5P_F03.f90 -tH5R.f90 -tH5S.f90 -tH5Sselect.f90 -tH5T.f90 -tH5T_F03.f90 -tH5VL.f90 -tH5Z.f90 -

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-
- - - diff --git a/fortran/doc/DevelGuide/robo_functions.html b/fortran/doc/DevelGuide/robo_functions.html deleted file mode 100644 index e4f253a..0000000 --- a/fortran/doc/DevelGuide/robo_functions.html +++ /dev/null @@ -1,39 +0,0 @@ - - - - - - - -Functions - - - - -
-
- -
-

Functions

-

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-

H

h5kind_to_type -h5offsetof -

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-
- - - diff --git a/fortran/doc/DevelGuide/robo_modules.html b/fortran/doc/DevelGuide/robo_modules.html deleted file mode 100644 index 8e57f38..0000000 --- a/fortran/doc/DevelGuide/robo_modules.html +++ /dev/null @@ -1,117 +0,0 @@ - - - - - - - -Modules - - - - -
-
- -
-

Modules

-

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-

F

fortran/test/fflush1.f90 -fortran/test/fflush2.f90 -fortran/test/fortranlib_test.f90 -fortran/test/fortranlib_test_1_8.f90 -fortran/test/fortranlib_test_F03.f90 -fortran/test/tc.c -fortran/test/tf.f90 -fortran/test/tH5A.f90 -fortran/test/tH5A_1_8.f90 -fortran/test/tH5D.f90 -fortran/test/tH5E.f90 -fortran/test/tH5E_F03.f90 -fortran/test/tH5F.f90 -fortran/test/tH5G.f90 -fortran/test/tH5G_1_8.f90 -fortran/test/tH5I.f90 -fortran/test/tH5L_F03.f90 -fortran/test/tH5O.f90 -fortran/test/tH5P.f90 -fortran/test/tH5P_F03.f90 -fortran/test/tH5R.f90 -fortran/test/tH5S.f90 -fortran/test/tH5Sselect.f90 -fortran/test/tH5T.f90 -fortran/test/tH5T_F03.f90 -fortran/test/tH5VL.f90 -fortran/test/tH5Z.f90 -

H

H5A -H5A (F03) -H5A (F90) -H5Af -H5D -H5D (F03) -H5D (F90) -H5Df -H5E -H5E (F03) -H5E (F90) -H5Ef -H5F -H5f90kit -H5FDMPIO -H5FDmpiof -H5Ff -H5G -H5Gf -H5GLOBAL -H5I -H5If -H5L -H5L (F03) -H5L (F90) -H5Lf -H5LIB -H5LIB_PROVISIONAL -H5LIB_PROVISIONAL (F90) -H5O -H5O (F03) -H5O (F90) -H5Of -H5P (_F90) -H5P (F03) -H5P (F90) -H5Pf -H5R -H5R (F03) -H5R (F90) -H5Rf -H5S -H5Sf -H5T -H5T (F03) -H5T (F90) -H5Tf -H5Z -H5Zf -HDF5 -HDF5 (mpio) -

S

src/H5_DBLE_InterfaceExclude.f90 -src/H5_DBLE_InterfaceInclude.f90 -

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-
- - - diff --git a/fortran/doc/DevelGuide/robo_programs.html b/fortran/doc/DevelGuide/robo_programs.html deleted file mode 100644 index 8c35230..0000000 --- a/fortran/doc/DevelGuide/robo_programs.html +++ /dev/null @@ -1,39 +0,0 @@ - - - - - - - -Programs - - - - -
-
- -
-

Programs

-

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-

H

H5test_kind -H5test_kind_SIZEOF -

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-
- - - diff --git a/fortran/doc/DevelGuide/robo_sourcefiles.html b/fortran/doc/DevelGuide/robo_sourcefiles.html deleted file mode 100644 index 63a8637..0000000 --- a/fortran/doc/DevelGuide/robo_sourcefiles.html +++ /dev/null @@ -1,309 +0,0 @@ - - - - - - - -Sourcefiles - - - - -
-
- -
- -
- - - diff --git a/fortran/doc/DevelGuide/robo_subroutines.html b/fortran/doc/DevelGuide/robo_subroutines.html deleted file mode 100644 index 0846c77..0000000 --- a/fortran/doc/DevelGuide/robo_subroutines.html +++ /dev/null @@ -1,421 +0,0 @@ - - - - - - - -Subroutines - - - - -
-
- -
-

Subroutines

-

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

- h5pget_double - h5pget_hyper_vector_size_f - h5pset_family_offset_f - h5pset_fapl_family_f - h5pset_meta_block_size_f -

H

h5aclose_f -h5acreate_by_name_f -h5acreate_f -h5adelete_by_idx_f -h5adelete_by_name_f -h5adelete_f -H5Aexists_by_name_f -H5Aexists_f -h5aget_create_plist_f -h5aget_info_by_idx_f -h5aget_info_by_name_f -h5aget_info_f -h5aget_name_by_idx_f -h5aget_name_f -h5aget_num_attrs_f -h5aget_space_f -h5aget_storage_size_f -h5aget_type_f -h5aopen_by_idx_f -H5Aopen_by_name_f -h5aopen_f -h5aopen_idx_f -h5aopen_name_f -h5aread_f -h5arename_by_name_f -h5arename_f -h5check_version_f -h5close_f -h5dclose_f -h5dcreate_anon_f -h5dcreate_f -h5dget_access_plist_f -h5dget_create_plist_f -h5dget_space_f -h5dget_space_status_f -h5dget_storage_size_f -h5dget_type_f -h5dont_atexit_f -h5dopen_f -h5dread_f -h5dset_extent -h5dvlen_get_max_len_f -h5dvlen_reclaim -h5eclear_f -h5eget_auto_f -h5eget_major_f -h5eget_minor_f -h5eprint_f -h5eset_auto2_f -h5eset_auto_f -h5fclose_f -h5fcreate_f -h5fflush_f -h5fget_access_plist_f -h5fget_create_plist_f -h5fget_filesize_f -h5fget_freespace_f -h5fget_name_f -h5fget_obj_count_f -h5fget_obj_ids_f -h5fis_hdf5_f -h5fmount_f -h5fopen_f -h5freopen_f -h5funmount_f -h5garbage_collect_f -h5gclose_f -H5Gcreate_anon_f -h5gcreate_f -h5get_libversion_f -h5gget_comment_f -H5Gget_create_plist_f -h5gget_info_by_idx_f -h5gget_info_by_name_f -h5gget_info_f -h5gget_linkval_f -h5gget_obj_info_idx_f -h5glink2_f -h5glink_f -h5gmove2_f -h5gmove_f -h5gn_members_f -h5gopen_f -h5gset_comment_f -h5gunlink_f -h5idec_ref_f -h5iget_file_id_f -h5iget_name_f -h5iget_ref_f -h5iget_type_f -h5iinc_ref_f -h5iis_valid_f -h5lcopy_f -H5Lcreate_external_f -H5Lcreate_hard_f -H5Lcreate_soft_f -h5ldelete_by_idx_f -h5ldelete_f -H5Lexists_f -h5lget_info_by_idx_f -h5lget_info_f -h5lget_name_by_idx_f -h5lis_registered_f -h5literate_by_name_f -h5literate_f -h5lmove_f -h5oclose_f -h5olink_f -h5oopen_f -h5open_by_addr_f -h5open_f -h5ovisit_f -h5pall_filters_avail_f -h5pclose_class_f -h5pclose_f -h5pcopy_f -h5pcopy_prop_f -h5pcreate_class_f -h5pcreate_class_f -h5pcreate_f -h5pequal_f -h5pexist_f -h5pfill_value_defined_f -h5pget_alignment_f -h5pget_alloc_time_f -H5Pget_attr_creation_order_f -H5Pget_attr_phase_change_f -h5pget_btree_ratios_f -h5pget_buffer_f -h5pget_cache_f -h5pget_char -h5pget_char -H5Pget_char_encoding_f -H5Pget_chunk_cache_f -h5pget_chunk_f -h5pget_class_f -h5pget_class_name_f -h5pget_class_parent_f -h5pget_copy_object_f -H5Pget_create_inter_group_f -h5pget_data_transform_f -h5pget_double -h5pget_driver_f -h5pget_dxpl_mpio_f -h5pget_edc_check_f -H5Pget_est_link_info_f -h5pget_external_count_f -h5pget_external_f -h5pget_fapl_core_f -h5pget_fapl_direct_f -h5pget_fapl_family_f -h5pget_fapl_mpio_f -h5pget_fapl_mpiposix_f -h5pget_fapl_multi_f -h5pget_fclose_degree_f -h5pget_fill_time_f -h5pget_filter_by_id_f -h5pget_filter_f -h5pget_gc_references_f -h5pget_integer -h5pget_integer -h5pget_istore_k_f -h5pget_layout_f -H5Pget_link_creation_order_f -H5Pget_link_phase_change_f -H5Pget_local_heap_size_hint_f -h5pget_meta_block_size_f -h5pget_nfilters_f -h5pget_nlinks_f -h5pget_npros_f -H5Pget_obj_track_times_f -h5pget_preserve_f -h5pget_real -h5pget_real -h5pget_sec2_f -h5pget_sieve_buf_size_f -h5pget_size_f -h5pget_sizes_f -h5pget_small_data_block_size_f -h5pget_split_f -h5pget_stdio_f -h5pget_sym_k_f -h5pget_userblock_f -h5pget_version_f -h5pinsert_char -h5pinsert_char -h5pinsert_double -h5pinsert_double -h5pinsert_integer -h5pinsert_integer -h5pinsert_ptr -h5pinsert_real -h5pinsert_real -h5pisa_class_f -h5pmodify_filter_f -h5pregister_char -h5pregister_char -h5pregister_double -h5pregister_double -h5pregister_integer -h5pregister_integer -h5pregister_ptr -h5pregister_real -h5pregister_real -h5premove_f -h5premove_filter_f -h5pset(get)fill_value_f -h5pset(get)fill_value_f -h5pset_alignment_f -h5pset_alloc_time_f -H5Pset_attr_creation_order_f -H5Pset_attr_phase_change_f -h5pset_btree_ratios_f -h5pset_buffer_f -h5pset_cache_f -h5pset_char -h5pset_char -H5Pset_char_encoding_f -H5Pset_chunk_cache_f -h5pset_chunk_f -h5pset_copy_object_f -H5Pset_create_inter_group_f -h5pset_data_transform_f -h5pset_deflate_f -h5pset_double -h5pset_double -h5pset_dxpl_mpio_f -h5pset_edc_check_f -h5pset_est_link_info_f -h5pset_external_f -h5pset_fapl_core_f -h5pset_fapl_direct_f -h5pset_fapl_mpio_f -h5pset_fapl_mpiposix_f -h5pset_fapl_multi_l -h5pset_fapl_multi_s -h5pset_fapl_sec2_f -h5pset_fapl_split_f -h5pset_fapl_stdio_f -h5pset_fclose_degree_f -h5pset_fill_time_f -h5pset_filter_f -h5pset_fletcher32_f -h5pset_gc_references_f -h5pset_hyper_vector_size_f -h5pset_integer -h5pset_integer -h5pset_istore_k_f -h5pset_layout_f -H5Pset_libver_bounds_f -H5Pset_link_creation_order_f -h5pset_link_phase_change_f -H5Pset_local_heap_size_hint_f -H5Pset_nbit_f -h5pset_nlinks_f -H5Pset_obj_track_times_f -h5pset_preserve_f -h5pset_real -h5pset_real -h5pset_scaleoffset_f -H5Pset_shared_mesg_index_f -H5Pset_shared_mesg_nindexes_f -h5pset_shuffle_f -h5pset_sieve_buf_size_f -h5pset_sizes_f -h5pset_small_data_block_size_f -h5pset_sym_k_f -h5pset_szip_f -h5pset_userblock_f -h5punregister_f -h5rcreate_object_f -h5rcreate_object_f -h5rcreate_ptr_f -h5rcreate_region_f -h5rcreate_region_f -h5rdereference_object_f -h5rdereference_object_f -h5rdereference_ptr_f -h5rdereference_region_f -h5rdereference_region_f -h5rget_name_object_f -h5rget_name_object_f -h5rget_name_ptr_f -h5rget_name_region_f -h5rget_name_region_f -h5rget_obj_type_f -h5rget_object_type_obj_f -h5rget_region_region_f -h5sclose_f -h5scopy_f -h5screate_f -h5screate_simple_f -H5Sdecode_f -H5Sencode_f -h5sextent_copy_f -h5sextent_equal_f -h5sget_select_bounds_f -h5sget_select_elem_npoints_f -h5sget_select_elem_pointlist_f -h5sget_select_hyper_blocklist_f -h5sget_select_hyper_nblocks_f -h5sget_select_npoints_f -h5sget_select_type_f -h5sget_simple_extent_dims_f -h5sget_simple_extent_ndims_f -h5sget_simple_extent_npoints_f -h5sget_simple_extent_type_f -h5sis_simple_f -h5soffset_simple_f -h5sselect_all_f -h5sselect_elements_f -h5sselect_hyperslab_f -h5sselect_none_f -h5sselect_valid_f -h5sset_extent_none_f -h5sset_extent_simple_f -h5tarray_create_f -h5tclose_f -h5tcommit_anon_f -h5tcommit_f -h5tcommitted_f -h5tcompiler_conv_f -H5Tconvert_f -h5tcopy_f -h5tcreate_f -H5Tdecode_f -h5tenaum_insert_f -H5Tencode_f -h5tenum_create_f -h5tenum_nameof_f -h5tenum_valuof_f -h5tequal_f -h5tget_array_dims_f -h5tget_array_ndims_f -h5tget_class_f -h5tget_create_plist_f -h5tget_cset_f -h5tget_ebias_f -h5tget_fields_f -h5tget_inpad_f -h5tget_member_class_f -h5tget_member_index_f -h5tget_member_name_f -h5tget_member_offset_f -h5tget_member_type_f -h5tget_member_value_f -h5tget_native_type_f -h5tget_nmembers_f -h5tget_norm_f -h5tget_offset_f -h5tget_order_f -h5tget_pad_f -h5tget_precision_f -h5tget_sign_f -h5tget_size_f -h5tget_strpad_f -h5tget_super_f -h5tget_tag_f -h5tinsert_f -h5tis_variable_str_f -h5topen_f -h5tpack_f -h5tset_cset_f -h5tset_ebias_f -h5tset_fields_f -h5tset_inpad_f -h5tset_norm_f -h5tset_offset_f -h5tset_order_f -h5tset_pad_f -h5tset_precision_f -h5tset_sign_f -h5tset_size_f -h5tset_strpad_f -h5tset_tag_f -h5tvlen_create_f -h5zfilter_avail_f -h5zget_filter_info_f -h5zunregister_f -

A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9

-
- - - diff --git a/fortran/doc/DevelGuide/robodoc.css b/fortran/doc/DevelGuide/robodoc.css deleted file mode 100644 index 207a172..0000000 --- a/fortran/doc/DevelGuide/robodoc.css +++ /dev/null @@ -1,302 +0,0 @@ -/****h* ROBODoc/ROBODoc Cascading Style Sheet - * FUNCTION - * This is the default cascading style sheet for documentation - * generated with ROBODoc. - * You can edit this file to your own liking and then use - * it with the option - * --css - * - * This style-sheet defines the following layout - * +----------------------------------------+ - * | logo | - * +----------------------------------------+ - * | extra | - * +----------------------------------------+ - * | | navi- | - * | | gation | - * | content | | - * | | | - * +----------------------------------------+ - * | footer | - * +----------------------------------------+ - * - * This style-sheet is based on a style-sheet that was automatically - * generated with the Strange Banana stylesheet generator. - * See http://www.strangebanana.com/generator.aspx - * - ****** - * $Id: html_generator.c,v 1.94 2008/06/17 11:49:27 gumpu Exp $ - */ - -body -{ - background-color: rgb(255,255,255); - color: rgb(98,84,55); - font-family: Arial, serif; - border-color: rgb(226,199,143); -} - -pre -{ - font-family: monospace; - margin: 15px; - padding: 5px; - white-space: pre; - color: #000; -} - -pre.source -{ - background-color: #ffe; - border: dashed #aa9 1px; -} - -p -{ - margin:15px; -} - -p.item_name -{ - font-weight: bolder; - margin:5px; - font-size: 120%; -} - -#content -{ - font-size: 100%; - color: rgb(0,0,0); - background-color: rgb(255,255,255); - border-left-width: 0px; - border-right-width: 0px; - border-top-width: 0px; - border-bottom-width: 0px; - border-left-style: none; - border-right-style: none; - border-top-style: none; - border-bottom-style: none; - padding: 40px 31px 14px 17px; - border-color: rgb(0,0,0); - text-align: justify; -} - -#navigation -{ - background-color: rgb(98,84,55); - color: rgb(230,221,202); - font-family: "Times New Roman", serif; - font-style: normal; - border-color: rgb(0,0,0); -} - -a.menuitem -{ - font-size: 120%; - background-color: rgb(0,0,0); - color: rgb(195,165,100); - font-variant: normal; - text-transform: none; - font-weight: normal; - padding: 1px 8px 3px 1px; - margin-left: 5px; - margin-right: 5px; - margin-top: 5px; - margin-bottom: 5px; - border-color: rgb(159,126,57); - text-align: right; -} - -#logo, #logo a -{ - font-size: 130%; - background-color: rgb(198,178,135); - color: rgb(98,84,55); - font-family: Georgia, serif; - font-style: normal; - font-variant: normal; - text-transform: none; - font-weight: bold; - padding: 20px 18px 20px 18px; - border-color: rgb(255,255,255); - text-align: right; -} - -#extra, #extra a -{ - font-size: 128%; - background-color: rgb(0,0,0); - color: rgb(230,221,202); - font-style: normal; - font-variant: normal; - text-transform: none; - font-weight: normal; - border-left-width: 0px; - border-right-width: 0px; - border-top-width: 0px; - border-bottom-width: 0px; - border-left-style: none; - border-right-style: none; - border-top-style: none; - border-bottom-style: none; - padding: 12px 12px 12px 12px; - border-color: rgb(195,165,100); - text-align: center; -} - -#content a -{ - color: rgb(159,126,57); - text-decoration: none; -} - -#content a:hover, #content a:active -{ - color: rgb(255,255,255); - background-color: rgb(159,126,57); -} - -a.indexitem -{ - display: block; -} - -h1, h2, h3, h4, h5, h6 -{ - background-color: rgb(221,221,221); - font-family: Arial, serif; - font-style: normal; - font-variant: normal; - text-transform: none; - font-weight: normal; -} - -h1 -{ - font-size: 151%; -} - -h2 -{ - font-size: 142%; -} - -h3 -{ - font-size: 133%; -} - -h4 -{ - font-size: 124%; -} - -h5 -{ - font-size: 115%; -} - -h6 -{ - font-size: 106%; -} - -#navigation a -{ - text-decoration: none; -} - -.menuitem:hover -{ - background-color: rgb(195,165,100); - color: rgb(0,0,0); -} - -#extra a -{ - text-decoration: none; -} - -#logo a -{ - text-decoration: none; -} - -#extra a:hover -{ -} - -/* layout */ -#navigation -{ - width: 22%; - position: relative; - top: 0; - right: 0; - float: right; - text-align: center; - margin-left: 10px; -} - -.menuitem {width: auto;} -#content {width: auto;} -.menuitem {display: block;} - - -div#footer -{ - background-color: rgb(198,178,135); - color: rgb(98,84,55); - clear: left; - width: 100%; - font-size: 71%; -} - -div#footer a -{ - background-color: rgb(198,178,135); - color: rgb(98,84,55); -} - -div#footer p -{ - margin:0; - padding:5px 10px -} - -span.keyword -{ - color: #00F; -} - -span.comment -{ - color: #080; -} - -span.quote -{ - color: #F00; -} - -span.squote -{ - color: #F0F; -} - -span.sign -{ - color: #008B8B; -} - -span.line_number -{ - color: #808080; -} - -@media print -{ - #navigation {display: none;} - #content {padding: 0px;} - #content a {text-decoration: underline;} -} diff --git a/fortran/doc/DevelGuide/src/H5Af_c.html b/fortran/doc/DevelGuide/src/H5Af_c.html deleted file mode 100644 index 7fcecc1..0000000 --- a/fortran/doc/DevelGuide/src/H5Af_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Af.c - - - - - -
-
- -

H5Af

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5A Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Aff_F03_f90.html b/fortran/doc/DevelGuide/src/H5Aff_F03_f90.html deleted file mode 100644 index 9e503f4..0000000 --- a/fortran/doc/DevelGuide/src/H5Aff_F03_f90.html +++ /dev/null @@ -1,130 +0,0 @@ - - - - - - - -./src/H5Aff_F03.f90 - - - - - -
-
- -

H5A (F03)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5A_PROVISIONAL
-
-

FILE

-
  src/fortran/src/H5Aff_F03.f90
-
-

PURPOSE

-
  This file contains Fortran 90 and Fortran 2003 interfaces for H5A functions.
-  It contains the same functions as H5Aff_F90.f90 but includes the
-  Fortran 2003 functions and the interface listings. This file will be compiled
-  instead of H5Aff_F90.f90 if Fortran 2003 functions are enabled.
-
-

NOTES

-
  (A) C_LOC and character strings according to the Fortran 2003 standard:
-
-  15.1.2.5 C_LOC(X)
-
-  Argument. X shall either
-
-  (1) have interoperable type and type parameters and be
-    (a) a variable that has the TARGET attribute and is interoperable,
-    (b) an allocated allocatable variable that has the TARGET attribute
-        and is not an array of zero size, or
-    (c) an associated scalar pointer, or
-  (2) be a nonpolymorphic scalar, have no length type parameters, and be
-    (a) a nonallocatable, nonpointer variable that has the TARGET attribute,
-    (b) an allocated allocatable variable that has the TARGET attribute, or
-    (c) an associated pointer.
-
-  - When X is a character, for interoperability the standard is:
-
-  15.2.1 Interoperability of intrinsic types
-
-  ...if the type is character, interoperability also requires that the length type parameter
-  be omitted or be specified by an initialization expression whose value is one.
-
-  THEREFORE compilers that have not extended the standard  require
-
-  CHARACTER(LEN=1), TARGET :: chr
-  or
-  CHARACTER, TARGET :: chr
-
-  (B)
-                         *** IMPORTANT ***
-  If you add a new H5A function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5aread_f

- -

[ Top ] [ H5A (F03) ] [ Subroutines ]

-

NAME

-
  h5aread_f
-
-

PURPOSE

-
  Reads an attribute.
-
-

INPUTS

-
  attr_id       - attribute identifier
-  memtype_id    - attribute memory type identifier
-  dims          - 1D array of size 7, stores sizes of the
-                - buf array dimensions.
-
-

OUTPUTS

-
  buf           - buffer to read attribute data in
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-  dims parameter was added to make code portable;
-  Aprile 4, 2001
-
-  Changed buf intent to INOUT to be consistant
-  with how the C functions handles it. The pg
-  compiler will return 0 if a buf value is not set.
-  February, 2008
-
-

NOTES

-
  This function is overloaded to write INTEGER,
-  REAL, DOUBLE PRECISION and CHARACTER buffers
-  up to 7 dimensions.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Aff_F90_f90.html b/fortran/doc/DevelGuide/src/H5Aff_F90_f90.html deleted file mode 100644 index aa01b49..0000000 --- a/fortran/doc/DevelGuide/src/H5Aff_F90_f90.html +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - -./src/H5Aff_F90.f90 - - - - - -
-
- -

H5A (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5A_PROVISIONAL
-
-

FILE

-
  fortran/src/H5Aff_F90.f90
-
-

PURPOSE

-
  This file contains Fortran 90 interfaces for H5A functions. It contains
-  the same functions as H5Aff_F03.f90 but excludes the Fortran 2003 functions
-  and the interface listings. This file will be compiled instead of H5Aff_F03.f90
-  if Fortran 2003 functions are not enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5A function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Aff_f90.html b/fortran/doc/DevelGuide/src/H5Aff_f90.html deleted file mode 100644 index 268c1db..0000000 --- a/fortran/doc/DevelGuide/src/H5Aff_f90.html +++ /dev/null @@ -1,1102 +0,0 @@ - - - - - - - -./src/H5Aff.f90 - - - - - -
-
- -

H5A

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5A
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5A functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5A function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5aclose_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aclose_f
-
-

PURPOSE

-
  Closes the specified attribute.
-
-

INPUTS

-
  attr_id  - attribute identifier
-
-

OUTPUTS

-
  hdferr   - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aclose_f(attr_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5acreate_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5acreate_by_name_f
-
-

PURPOSE

-
  Creates an attribute attached to a specified object
-
-

INPUTS

-
  loc_id        - Location or object identifier; may be dataset or group
-  obj_name      - Name, relative to loc_id, of object that attribute is to be attached to
-  attr_name     - Attribute name
-  type_id       - Attribute datatype identifier
-  space_id      - Attribute dataspace identifier
-
-

OUTPUTS

-
  attr          - an attribute identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  acpl_id       - Attribute creation property list identifier (Currently not used.)
-  aapl_id       - Attribute access property list identifier (Currently not used.)
-  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February, 2008
-
-

SOURCE

-
  SUBROUTINE h5acreate_by_name_f(loc_id, obj_name, attr_name, type_id, space_id, attr, hdferr, &
-       acpl_id, aapl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T),   INTENT(IN)  :: loc_id
-    CHARACTER(LEN=*), INTENT(IN)  :: obj_name
-    CHARACTER(LEN=*), INTENT(IN)  :: attr_name
-    INTEGER(HID_T),   INTENT(IN)  :: type_id
-    INTEGER(HID_T),   INTENT(IN)  :: space_id
-    INTEGER(HID_T),   INTENT(OUT) :: attr
-    INTEGER,          INTENT(OUT) :: hdferr
-
-    INTEGER(HID_T),   INTENT(IN), OPTIONAL :: acpl_id
-    INTEGER(HID_T),   INTENT(IN), OPTIONAL :: aapl_id
-    INTEGER(HID_T),   INTENT(IN), OPTIONAL :: lapl_id
-
- -
- -

h5acreate_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5acreate_f
-
-

PURPOSE

-
  Creates a dataset as an attribute of a group, dataset, or named datatype
-
-

INPUTS

-
  loc_id        - identifier of an object (group, dataset,
-                  or named datatype) attribute is attached to
-  name          - attribute name
-  type_id       - attribute datatype identifier
-  space_id      - attribute dataspace identifier
-
-

OUTPUTS

-
  attr_id       - attribute identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  acpl_id       - Attribute creation property list identifier
-  appl_id       - Attribute access property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5acreate_f(loc_id, name, type_id, space_id, attr_id, &
-                                 hdferr, acpl_id, aapl_id )
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Attribute name
-    INTEGER(HID_T), INTENT(IN) :: type_id  ! Attribute datatype identifier
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Attribute dataspace identifier
-    INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code:
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5adelete_by_idx_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5adelete_by_idx_f
-
-

PURPOSE

-
  Deletes an attribute from an object according to index order
-
-

INPUTS

-
  loc_id        - Location or object identifier; may be dataset or group
-  obj_name      - Name of object, relative to location, from which attribute is to be removed
-  idx_type      - Type of index; Possible values are:
-                   H5_INDEX_UNKNOWN_F = -1  - Unknown index type
-                   H5_INDEX_NAME_F          - Index on names
-                   H5_INDEX_CRT_ORDER_F     - Index on creation order
-                   H5_INDEX_N_F             - Number of indices defined
-
-  order         - Order in which to iterate over index; Possible values are:
-                   H5_ITER_UNKNOWN_F    - Unknown order
-                   H5_ITER_INC_F        - Increasing order
-                   H5_ITER_DEC_F        - Decreasing order
-                   H5_ITER_NATIVE_F     - No particular order, whatever is fastest
-                   H5_ITER_N_F          - Number of iteration orders
-
-  n             - Offset within index
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5adelete_by_idx_f(loc_id, obj_name, idx_type, order, n, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id      ! Identifer for object to which attribute is attached
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object, relative to location,
-                                              !  from which attribute is to be removed
-    INTEGER, INTENT(IN) :: idx_type           ! Type of index; Possible values are:
-                                              !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                              !    H5_INDEX_NAME_F      - Index on names
-                                              !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                              !    H5_INDEX_N_F       - Number of indices defined
-
-    INTEGER, INTENT(IN) :: order              ! Order in which to iterate over index; Possible values are:
-                                              !    H5_ITER_UNKNOWN_F  - Unknown order
-                                              !    H5_ITER_INC_F      - Increasing order
-                                              !    H5_ITER_DEC_F      - Decreasing order
-                                              !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-                                              !    H5_ITER_N_F      - Number of iteration orders
-    INTEGER(HSIZE_T), INTENT(IN) :: n         ! Offset within index
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code:
-                                           ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-
- -
- -

h5adelete_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5adelete_by_name_f
-
-

PURPOSE

-
  Removes an attribute from a specified location
-
-

INPUTS

-
  loc_id        - Identifer for object to which attribute is attached
-  obj_name      - Name of attribute to open
-  attr_name     - Attribute access property list
-  lapl_id       - Link access property list
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5adelete_by_name_f(loc_id, obj_name, attr_name, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id      ! Identifer for object to which attribute is attached
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object, relative to location,
-                                              !  from which attribute is to be removed
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Name of attribute to delete
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code:
-                                              ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-
- -
- -

h5adelete_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5adelete_f
-
-

PURPOSE

-
  Deletes an attribute of an object (group, dataset or
-  named datatype)
-
-

INPUTS

-
  obj_id        - object identifier
-  name          - attribute name
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5adelete_f(obj_id, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id  ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Attribute name
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

H5Aexists_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  H5Aexists_by_name_f
-
-

PURPOSE

-
  Determines whether an attribute with a given name exists on an object
-
-

INPUTS

-
  loc_id        - Location identifier
-  obj_name      - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot)
-  attr_name     - Attribute name
-
-

OUTPUTS

-
  attr_exists   - attribute exists status
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list identifier
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February, 2008
-
-

SOURCE

-
  SUBROUTINE h5aexists_by_name_f(loc_id, obj_name, attr_name, attr_exists, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id     ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id,
-                                             ! absolute from the file’s root group, or '.'
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name
-    LOGICAL, INTENT(OUT) :: attr_exists ! .TRUE. if exists, .FALSE. otherwise
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code:
-                                        ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-
- -
- -

H5Aexists_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  H5Aexists_f
-
-

PURPOSE

-
  Determines whether an attribute with a given name exists on an object
-
-

INPUTS

-
  obj_id        - Object identifier
-  attr_name     - Attribute name
-
-

OUTPUTS

-
  attr_exists   - attribute exists status
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February, 2008
-
-

SOURCE

-
  SUBROUTINE h5aexists_f(obj_id, attr_name, attr_exists, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id      ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name
-    LOGICAL, INTENT(OUT) :: attr_exists  ! .TRUE. if exists, .FALSE. otherwise
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5aget_create_plist_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_create_plist_f
-
-

PURPOSE

-
  Gets an attribute creation property list identifier
-
-

INPUTS

-
  attr_id          - Identifier of the attribute
-
-

OUTPUTS

-
  creation_prop_id - Identifier for the attribute’s creation property
-  hdferr           - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_create_plist_f(attr_id, creation_prop_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Identifier of the attribute
-    INTEGER(HID_T), INTENT(OUT) :: creation_prop_id   ! Identifier for the attribute’s creation property
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5aget_info_by_idx_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_info_by_idx_f
-
-

PURPOSE

-
  Retrieves attribute information, by attribute index position
-
-

INPUTS

-
  loc_id        - Location of object to which attribute is attached
-  obj_name      - Name of object to which attribute is attached, relative to location
-  idx_type      - Type of index
-  order         - Index traversal order
-  n             - Attribute’s position in index
-
- OUTPUTS  NOTE: In C it is defined as a structure: H5A_info_t
-  corder_valid  - indicates whether the creation order data is valid for this attribute
-  corder        - is a positive integer containing the creation order of the attribute
-  cset          - indicates the character set used for the attribute’s name
-  data_size     - indicates the size, in the number of characters, of the attribute
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_info_by_idx_f(loc_id, obj_name, idx_type, order, n, &
-       f_corder_valid, corder, cset, data_size, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id      ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object to which attribute is attached
-    INTEGER, INTENT(IN) :: idx_type           ! Type of index; Possible values are:
-                                              !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                              !    H5_INDEX_NAME_F      - Index on names
-                                              !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                              !    H5_INDEX_N_F       - Number of indices defined
-    INTEGER, INTENT(IN) :: order              ! Order in which to iterate over index; Possible values are:
-                                              !    H5_ITER_UNKNOWN_F  - Unknown order
-                                              !    H5_ITER_INC_F      - Increasing order
-                                              !    H5_ITER_DEC_F      - Decreasing order
-                                              !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-
-    INTEGER(HSIZE_T), INTENT(IN) :: n         ! Attribute’s position in index
-
-
-    LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute
-    INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute
-    INTEGER, INTENT(OUT) :: cset   ! Indicates the character set used for the attribute’s name
-    INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Link access property list
-
- -
- -

h5aget_info_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_info_by_name_f
-
-

PURPOSE

-
  Retrieves attribute information, by attribute name
-
-

INPUTS

-
  loc_id        - Location of object to which attribute is attached
-  obj_name      - Name of object to which attribute is attached, relative to location
-  attr_name     - Attribute name
-
- OUTPUTS  NOTE: In C it is defined as a structure: H5A_info_t
-  corder_valid  - indicates whether the creation order data is valid for this attribute
-  corder        - is a positive integer containing the creation order of the attribute
-  cset          - indicates the character set used for the attribute’s name
-  data_size     - indicates the size, in the number of characters, of the attribute
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_info_by_name_f(loc_id, obj_name, attr_name, &
-       f_corder_valid, corder, cset, data_size, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id    ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name
-
-
-    LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute
-    INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute
-    INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name
-    INTEGER(HSIZE_T), INTENT(OUT) :: data_size   ! Indicates the size, in the number of characters, of the attribute
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code:
-                                           ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Link access property list
-
- -
- -

h5aget_info_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_info_f
-
-

PURPOSE

-
  Retrieves attribute information, by attribute identifier
-
-

INPUTS

-
  attr_id       - attribute identifier
-
-

OUTPUTS

-
  NOTE: In C it is defined as a structure: H5A_info_t
-
-  corder_valid  - indicates whether the creation order data is valid for this attribute
-  corder        - is a positive integer containing the creation order of the attribute
-  cset          - indicates the character set used for the attribute’s name
-  data_size     - indicates the size, in the number of characters, of the attribute
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Attribute identifier
-
-    LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute
-    INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute
-    INTEGER, INTENT(OUT) :: cset   ! Indicates the character set used for the attribute’s name
-    INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5aget_name_by_idx_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_name_by_idx_f
-
-

PURPOSE

-
  Gets an attribute name, by attribute index position.
-
-

INPUTS

-
  loc_id        - Location of object to which attribute is attached
-  obj_name      - Name of object to which attribute is attached, relative to location
-  idx_type      - Type of index; Possible values are:
-                   H5_INDEX_UNKNOWN_F = -1  - Unknown index type
-                   H5_INDEX_NAME_F          - Index on names
-                   H5_INDEX_CRT_ORDER_F     - Index on creation order
-                   H5_INDEX_N_F             - Number of indices defined
-
-  order         - Order in which to iterate over index; Possible values are:
-                   H5_ITER_UNKNOWN_F    - Unknown order
-                   H5_ITER_INC_F        - Increasing order
-                   H5_ITER_DEC_F        - Decreasing order
-                   H5_ITER_NATIVE_F     - No particular order, whatever is fastest
-                   H5_ITER_N_F          - Number of iteration orders
-  order         - Index traversal order
-  n             - Attribute’s position in index
-
-

OUTPUTS

-
  name          - Attribute name
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-  size          - Size, in bytes, of attribute name
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_name_by_idx_f(loc_id, obj_name, idx_type, order, &
-       n, name, hdferr, size, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id      ! Identifer for object to which attribute is attached
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object, relative to location,
-                                              !  from which attribute is to be removed *TEST* check NULL
-    INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are:
-                                    !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                    !    H5_INDEX_NAME_F       - Index on names
-                                    !    H5_INDEX_CRT_ORDER_F  - Index on creation order
-                                    !    H5_INDEX_N_F         - Number of indices defined
-
-    INTEGER, INTENT(IN) :: order    ! Order in which to iterate over index; Possible values are:
-                                    !    H5_ITER_UNKNOWN_F   - Unknown order
-                                    !    H5_ITER_INC_F      - Increasing order
-                                    !    H5_ITER_DEC_F       - Decreasing order
-                                    !    H5_ITER_NATIVE_F    - No particular order, whatever is fastest
-                                    !    H5_ITER_N_F        - Number of iteration orders
-    INTEGER(HSIZE_T), INTENT(IN) :: n !  Attribute’s position in index
-    CHARACTER(LEN=*), INTENT(OUT) :: name ! Attribute name
-    INTEGER, INTENT(OUT) :: hdferr    ! Error code:
-                                      ! Returns attribute name size,
-                                      ! -1 if fail
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-    INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size  ! Indicates the size, in the number of characters, 
-                                                    ! of the attribute
-
- -
- -

h5aget_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_name_f
-
-

PURPOSE

-
  Gets an attribute name.
-
-

INPUTS

-
  attr_id       - attribute identifier
-  size          - size of a buffer to read name in
-
-

OUTPUTS

-
  buf           - buffer to read name in
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aget_name_f(attr_id, size, buf, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Attribute identifier
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Buffer size
-    CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Buffer to hold attribute name
-    INTEGER, INTENT(OUT) :: hdferr ! Error code:
-                                   ! name length is successful, -1 if fail
-
- -
- -

h5aget_num_attrs_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_num_attrs_f
-
-

PURPOSE

-
  Determines the number of attributes attached to an object.
-
-

INPUTS

-
  obj_id        - object (group, dataset, or named datatype)
-  identifier
-
-

OUTPUTS

-
  attr_num      - number of attributes attached to the object
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aget_num_attrs_f(obj_id, attr_num, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id  ! Object identifier
-    INTEGER, INTENT(OUT) :: attr_num      ! Number of attributes of the object
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5aget_space_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_space_f
-
-

PURPOSE

-
  Gets a copy of the dataspace for an attribute.
-
-

INPUTS

-
  attr_id       - attribute identifier
-
-

OUTPUTS

-
  space_id      - attribite dataspace identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aget_space_f(attr_id, space_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id   ! Attribute identifier
-    INTEGER(HID_T), INTENT(OUT) :: space_id ! Attribute dataspace identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5aget_storage_size_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_storage_size_f
-
-

PURPOSE

-
  Returns the amount of storage required for an attribute.
-
-

INPUTS

-
  attr_id       - attribute identifier
-
-

OUTPUTS

-
  size          - attribute storage size
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aget_storage_size_f(attr_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Attribute identifier
-    INTEGER(HSIZE_T), INTENT(OUT) :: size  ! Attribute storage requirement
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5aget_type_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aget_type_f
-
-

PURPOSE

-
  Gets an attribute datatype.
-
-

INPUTS

-
  attr_id       - attribute identifier
-
-

OUTPUTS

-
  type_id       - attribute datatype identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aget_type_f(attr_id, type_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: attr_id  ! Attribute identifier
-    INTEGER(HID_T), INTENT(OUT) :: type_id ! Attribute datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5aopen_by_idx_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aopen_by_idx_f
-
-

PURPOSE

-
  Opens an existing attribute that is attached to an object specified by location and name
-
-

INPUTS

-
  loc_id        - Location of object to which attribute is attached
-  obj_name      - Name of object to which attribute is attached, relative to location
-  idx_type      - Type of index
-  order         - Index traversal order
-  n             - Attribute’s position in index
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  aapl_id       - Attribute access property list
-  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aopen_by_idx_f(loc_id, obj_name, idx_type, order, n, attr_id, hdferr, aapl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id      ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object to which attribute is attached
-    INTEGER, INTENT(IN) :: idx_type           ! Type of index; Possible values are:
-                                              !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                              !    H5_INDEX_NAME_F      - Index on names
-                                              !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                              !    H5_INDEX_N_F       - Number of indices defined
-    INTEGER, INTENT(IN) :: order              ! Order in which to iterate over index; Possible values are:
-                                              !    H5_ITER_UNKNOWN_F  - Unknown order
-                                              !    H5_ITER_INC_F      - Increasing order
-                                              !    H5_ITER_DEC_F      - Decreasing order
-                                              !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-
-    INTEGER(HSIZE_T), INTENT(IN) :: n       ! Attribute’s position in index
-
-    INTEGER(HID_T), INTENT(OUT) :: attr_id  ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code:
-                                            ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id  ! Attribute access property list
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Link access property list
-
- -
- -

H5Aopen_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  H5Aopen_by_name_f
-
-

PURPOSE

-
  Opens an attribute for an object by object name and attribute name.
-
-

INPUTS

-
  loc_id        - Location from which to find object to which attribute is attached
-  obj_name      - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot)
-  attr_name     - Attribute name
-
-

OUTPUTS

-
  attr_id       - attribute identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  aapl_id       - Attribute access property list (Currently unused; should be passed in as H5P_DEFAULT.)
-  lapl_id       - Link access property list identifier
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February, 2008
-
-

SOURCE

-
  SUBROUTINE h5aopen_by_name_f(loc_id, obj_name, attr_name, attr_id, hdferr, aapl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id    ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id,
-                                             ! absolute from the file’s root group, or '.'
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name
-    INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code:
-                                           ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list
-                                                    ! (Currently unused; should be passed in as H5P_DEFAULT_F)
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-
- -
- -

h5aopen_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aopen_f
-
-

PURPOSE

-
  Opens an attribute for an object specified by object
-  identifier and attribute name
-
-

INPUTS

-
  obj_id        - Identifer for object to which attribute is attached
-  attr_name     - Name of attribute to open
-
-

OUTPUTS

-
  attr_id       - attribute identifier
-
-

OPTIONAL PARAMETERS

-
  aapl_id       - Attribute access property list
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5aopen_f(obj_id, attr_name, attr_id, hdferr, aapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id      ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name
-    INTEGER(HID_T), INTENT(OUT) :: attr_id    ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              !   Success:  0
-                                              !   Failure: -1
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id     ! Attribute access property list
-
- -
- -

h5aopen_idx_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aopen_idx_f
-
-

PURPOSE

-
  Opens the attribute specified by its index.
-
-

INPUTS

-
  obj_id        - identifier of a group, dataset, or named
-                  datatype an attribute to be attached to
-  index         - index of the attribute to open (zero-based)
-
-

OUTPUTS

-
  attr_id       - attribute identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aopen_idx_f(obj_id, index, attr_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id    ! Object identifier
-    INTEGER, INTENT(IN) :: index            ! Attribute index
-    INTEGER(HID_T), INTENT(OUT) :: attr_id  ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5aopen_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5aopen_name_f
-
-

PURPOSE

-
  Opens an attribute specified by name.
-
-

INPUTS

-
  obj_id        - identifier of a group, dataset, or named
-                  datatype atttribute to be attached to
-  name          - attribute name
-
-

OUTPUTS

-
  attr_id       - attribute identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces are added for
-  called C functions (it is needed for Windows
-  port).  February 27, 2001
-
-

SOURCE

-
  SUBROUTINE h5aopen_name_f(obj_id, name, attr_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id    ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Attribute name
-    INTEGER(HID_T), INTENT(OUT) :: attr_id  ! Attribute identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5arename_by_name_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5arename_by_name_f
-
-

PURPOSE

-
  Renames an attribute
-
-

INPUTS

-
  loc_id        - Location or object identifier; may be dataset or group
-  obj_name      - Name of object, relative to location,
-                  whose attribute is to be renamed
-  old_attr_name - Prior attribute name
-  new_attr_name - New attribute name
-  lapl_id       - Link access property list identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5arename_by_name_f(loc_id, obj_name, old_attr_name, new_attr_name, &
-        hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id    ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of object, relative to location,
-                                              !  whose attribute is to be renamed
-    CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name
-    CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name
-
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-
- -
- -

h5arename_f

- -

[ Top ] [ H5A ] [ Subroutines ]

-

NAME

-
  h5arename_f
-
-

PURPOSE

-
  Renames an attribute
-
-

INPUTS

-
  loc_id        - Location or object identifier; may be dataset or group
-  old_attr_name - Prior attribute name
-  new_attr_name - New attribute name
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

HISTORY

-
  N/A
-
-

SOURCE

-
  SUBROUTINE h5arename_f(loc_id, old_attr_name, new_attr_name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id    ! Object identifier
-    CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name
-    CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Df_c.html b/fortran/doc/DevelGuide/src/H5Df_c.html deleted file mode 100644 index 1e163f2..0000000 --- a/fortran/doc/DevelGuide/src/H5Df_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Df.c - - - - - -
-
- -

H5Df

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5D Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Dff_F03_f90.html b/fortran/doc/DevelGuide/src/H5Dff_F03_f90.html deleted file mode 100644 index 0bb4173..0000000 --- a/fortran/doc/DevelGuide/src/H5Dff_F03_f90.html +++ /dev/null @@ -1,138 +0,0 @@ - - - - - - - -./src/H5Dff_F03.f90 - - - - - -
-
- -

H5D (F03)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5D_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran 90 and Fortran 2003 interfaces for H5D functions.
-  It contains the same functions as H5Dff_DEPRECIATE.f90 but includes the
-  Fortran 2003 functions and the interface listings. This file will be compiled
-  instead of H5Dff_DEPRECIATE.f90 if Fortran 2003 functions are enabled.
-
-

NOTES

-
  (1) The maximum rank of an array allowed in Fortran is 7, therefore
-  we only provide an interface for arrays up to and including rank 7.
-
-  (2) Unfortunately we are using a generic interface and one of the factors
-  used in determining the proper routine to select is that of the array
-  rank being passed. Therefore, we can not create just one subroutine for
-  each array type (integer, real, etc...) and use a
-  rank 1 array of assumed size to handle multiple ranks, i.e.
-  (i.e. integer, dimension(*) :: ... )
-  (i.e. real   , dimension(*) :: ... ) etc...
-
-  (3) Could not place the USE ISO_C_BINDING in the module header because it may
-  conflict with the USE ISO_C_BINDING included in the user's program. Moved
-  the statement instead to each subroutine.
-
-
-  (4) C_LOC and character strings according to the Fortran 2003 standard:
-
-  15.1.2.5 C_LOC(X)
-
-  Argument. X shall either
-
-  (A) have interoperable type and type parameters and be
-  (a) a variable that has the TARGET attribute and is interoperable,
-  (b) an allocated allocatable variable that has the TARGET attribute
-  and is not an array of zero size, or
-  (c) an associated scalar pointer, or
-  (B) be a nonpolymorphic scalar, have no length type parameters, and be
-  (a) a nonallocatable, nonpointer variable that has the TARGET attribute,
-  (b) an allocated allocatable variable that has the TARGET attribute, or
-  (c) an associated pointer.
-
-        - When X is a character, for interoperability the standard is:
-
-  15.2.1 Interoperability of intrinsic types
-
-  ...if the type is character, interoperability also requires that the length type parameter
-  be omitted or be specified by an initialization expression whose value is one.
-
-  THEREFORE compilers that have not extended the standard require the
-  argument in C_LOC to be of the variant:
-
-  CHARACTER(LEN=1), TARGET :: chr
-  or
-  CHARACTER, TARGET :: chr
-  (B)
-                         *** IMPORTANT ***
-  If you add a new H5D function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5dvlen_reclaim

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dvlen_reclaim
-
-

PURPOSE

-
  Reclaims VL datatype memory buffers. 
-
-

INPUTS

-
  type_id  - Identifier of the datatype. 
-  space_id - Identifier of the dataspace. 
-  plist_id - Identifier of the property list used to create the buffer. 
-       buf - Pointer to the buffer to be reclaimed. 
-
-

OUTPUTS

-
  hdferr   - error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
 M. Scot Breitenfeld
- January 11, 2011
-
-

SOURCE

-
  SUBROUTINE H5Dvlen_reclaim_f(type_id, space_id, plist_id, buf, hdferr)
-
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-
-    INTEGER(HID_T), INTENT(IN) :: type_id   ! Identifier of the datatype. 
-    INTEGER(HID_T), INTENT(IN) :: space_id  ! Identifier of the dataspace. 
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Identifier of the property list used to create the buffer. 
-    TYPE(C_PTR), INTENT(INOUT) :: buf       ! Pointer to the buffer to be reclaimed. 
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Dff_F90_f90.html b/fortran/doc/DevelGuide/src/H5Dff_F90_f90.html deleted file mode 100644 index afebdd8..0000000 --- a/fortran/doc/DevelGuide/src/H5Dff_F90_f90.html +++ /dev/null @@ -1,116 +0,0 @@ - - - - - - - -./src/H5Dff_F90.f90 - - - - - -
-
- -

H5D (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5D_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran 90 interfaces for H5D functions. It contains
-  the same functions as H5Dff_F03.f90 but excludes the Fortran 2003 functions
-  and the interface listings. This file will be compiled instead of H5Dff_F03.f90
-  if Fortran 2003 functions are not enabled.
-
-

NOTES

-
  (1) The maximum rank of an array allowed in Fortran is 7, therefore
-  we only provide an interface for arrays up to and including rank 7.
-
-  (2) Unfortunately we are using a generic interface and one of the factors
-  used in determining the proper routine to select is that of the array
-  rank being passed, therefore we can not create just one subroutine for
-  each array type (integer, real, etc...) of various ranks and then use a
-  rank 1 array of assumed size in the just one subroutine,
-  (i.e. integer, dimension(*) :: ... )
-  (i.e. real   , dimension(*) :: ... ) etc...
-
-  (3)
-                         *** IMPORTANT ***
-  If you add a new H5D function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5dread_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dread_f
-
-

PURPOSE

-
  Reads raw data from the specified dataset into buf,
-  converting from file datatype and dataspace to memory
-  datatype and dataspace.
-
-

INPUTS

-
  dset_id       - dataset identifier
-  mem_type_id   - memory type identifier
-  dims          - 1-dim array of size 7; dims(k) has the size
-                  of k-th dimension of the buf array
-
-

OUTPUTS

-
  buf     - buffer to read data in
-  hdferr: - error code
-             Success:  0
-             Failure: -1
-
-

OPTIONAL PARAMETERS

-
  mem_space_id  - memory dataspace identifier
-  file_space_id - file dataspace identifier
-  xfer_prp      - trasfer property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-  dims parameter was added to make code portable;
-  n parameter was replaced with dims parameter in
-  the h5dwrite_reference_obj and h5dwrite_reference_dsetreg
-  functions.  April 2, 2001
-
-

NOTES

-
  This function is overloaded to read INTEGER,
-  REAL, DOUBLE PRECISION and CHARACTER buffers
-  up to 7 dimensions, and one dimensional buffers
-  of the TYPE(hobj_ref_t_f) and TYPE(hdset_reg_ref_t_f) types.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Dff_f90.html b/fortran/doc/DevelGuide/src/H5Dff_f90.html deleted file mode 100644 index 5444a93..0000000 --- a/fortran/doc/DevelGuide/src/H5Dff_f90.html +++ /dev/null @@ -1,506 +0,0 @@ - - - - - - - -./src/H5Dff.f90 - - - - - -
-
- -

H5D

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5D
-
-

FILE

-
  fortran/src/H5Dff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5D functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5D function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5dclose_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dclose_f
-
-

PURPOSE

-
  Closes a dataset.
-
-

INPUTS

-
  dset_id       - dataset identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5dclose_f(dset_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5dcreate_anon_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dcreate_anon_f
-
-

PURPOSE

-
  Creates a dataset in a file without linking it into the file structure
-
-

INPUTS

-
  loc_id        - Identifier of the file or group within which to create the dataset.
-  type_id       - Identifier of the datatype to use when creating the dataset.
-  space_id      - Identifier of the dataspace to use when creating the dataset.
-
-

OUTPUTS

-
  dset_id       - dataset identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  dcpl_id       - Dataset creation property list identifier.
-  dapl_id       - Dataset access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 11, 2008
-
-

SOURCE

-
  SUBROUTINE h5dcreate_anon_f(loc_id, type_id, space_id, dset_id, hdferr, dcpl_id, dapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier.
-    INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier.
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier.
-    INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dcpl_id  ! Dataset creation property list identifier.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id  ! Dataset access property list identifier.
-
- -
- -

h5dcreate_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dcreate_f
-
-

PURPOSE

-
  Creates a dataset at the specified location
-
-

INPUTS

-
  loc_id        - file or group identifier
-  name          - dataset name
-  type_id       - dataset datatype identifier
-  space_id      - dataset dataspace identifier
-
-

OUTPUTS

-
  dset_id       - dataset identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  creation_prp  - Dataset creation property list
-  lcpl_id       - Link creation property list
-  dapl_id       - Dataset access property list
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  - Explicit Fortran interfaces were added for
-    called C functions (it is needed for Windows
-    port).  February 28, 2001
-
-  - Added version's 1.8 new optional parameters
-    February, 2008
-
-

SOURCE

-
  SUBROUTINE h5dcreate_f(loc_id, name, type_id, space_id, dset_id, &
-       hdferr, dcpl_id, lcpl_id, dapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the dataset
-    INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-    INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5dget_access_plist_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_access_plist_f
-
-

PURPOSE

-
  Returns a copy of the dataset creation property list.
-
-

INPUTS

-
  dset_id       - Dataset identifier
-
-

OUTPUTS

-
  plist_id      - Dataset access property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 13, 2009
-
-

SOURCE

-
SUBROUTINE h5dget_access_plist_f(dset_id, plist_id, hdferr)
-  IMPLICIT NONE
-  INTEGER(HID_T), INTENT(IN)  :: dset_id
-  INTEGER(HID_T), INTENT(OUT) :: plist_id 
-  INTEGER       , INTENT(OUT) :: hdferr  
-
- -
- -

h5dget_create_plist_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_create_plist_f
-
-

PURPOSE

-
  Returns an identifier for a copy of the dataset creation
-  property list for a dataset.
-
-

INPUTS

-
  dataset_id    - dataset identifier
-
-

OUTPUTS

-
  plist_id      - creation property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5dget_create_plist_f(dataset_id, plist_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id   ! Dataset identifier
-    INTEGER(HID_T), INTENT(OUT) :: plist_id    ! Dataset creation
-                                               ! property list identifier
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5dget_space_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_space_f
-
-

PURPOSE

-
  Returns an identifier for a copy of the dataspace for a
-  dataset.
-
-

INPUTS

-
  dataset_id    - dataset identifier
-
-

OUTPUTS

-
  dataspace_id  - dataspace identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5dget_space_f(dataset_id, dataspace_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id      ! Dataset identifier
-    INTEGER(HID_T), INTENT(OUT) :: dataspace_id   ! Dataspace identifier
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5dget_space_status_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_space_status_f
-
-

PURPOSE

-
  Returns the status of data space allocation.
-
-

INPUTS

-
  dset_id       - dataset identifier
-
-

OUTPUTS

-
  flag          - status; may have one of the following values:
-                   H5D_SPACE_STS_ERROR_F
-                   H5D_SPACE_STS_NOT_ALLOCATED_F
-                   H5D_SPACE_STS_PART_ALLOCATED_F
-                   H5D_SPACE_STS_ALLOCATED_F
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5dget_space_status_f(dset_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id  ! Dataspace identifier
-    INTEGER, INTENT(IN)        :: flag     ! Memory buffer to fill in
-    INTEGER, INTENT(OUT)       :: hdferr   ! Error code
-
- -
- -

h5dget_storage_size_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_storage_size_f
-
-

PURPOSE

-
  Returns the amount of storage requires by a dataset
-
-

INPUTS

-
  dataset_id    - dataset identifier
-
-

OUTPUTS

-
  size          - datastorage size
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  October 15, 2002
-
-

SOURCE

-
  SUBROUTINE h5dget_storage_size_f(dataset_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier
-    INTEGER(HSIZE_T),  INTENT(OUT)  :: size  ! Amount of storage
-                                             ! allocated for dataset
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5dget_type_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dget_type_f
-
-

PURPOSE

-
  Returns an identifier for a copy of the datatype for a
-  dataset.
-
-

INPUTS

-
  dataset_id    - dataset identifier
-
-

OUTPUTS

-
  datatype_id   - dataspace identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-

SOURCE

-
  SUBROUTINE h5dget_type_f(dataset_id, datatype_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id      ! Dataset identifier
-    INTEGER(HID_T), INTENT(OUT) :: datatype_id    ! Datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5dopen_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dopen_f
-
-

PURPOSE

-
  Opens an existing dataset.
-
-

INPUTS

-
  loc_id        - file or group identifier
-  name          - dataset name
-
-

OUTPUTS

-
  dset_id       - dataset identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  dapl_id       - Dataset access property list
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  -Explicit Fortran interfaces were added for
-   called C functions (it is needed for Windows
-   port).  February 28, 2001
-
-  -Added 1.8 (optional) parameter dapl_id
-   February, 2008, M. Scot Breitenfeld
-
-

SOURCE

-
  SUBROUTINE h5dopen_f(loc_id, name, dset_id, hdferr, dapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the dataset
-    INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list
-
- -
- -

h5dset_extent

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dset_extent (instead of obsolete name: h5dextend_f)
-
-

PURPOSE

-
  Extends a dataset with unlimited dimension.
-
-

INPUTS

-
  dataset_id    - dataset identifier
-  size          - array containing the new magnitude of
-                  each dimension
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-  Changed name from the now obsolete h5dextend_f
-  to h5dset_extent_f. Provided interface to old name
-  for backward compatability. -MSB- March 14, 2008
-
-

SOURCE

-
  SUBROUTINE h5dset_extent_f(dataset_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id      ! Dataset identifier
-    INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN)  :: size
-    ! Array containing
-    ! dimensions' sizes
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5dvlen_get_max_len_f

- -

[ Top ] [ H5D ] [ Subroutines ]

-

NAME

-
  h5dvlen_get_max_len_f
-
-

PURPOSE

-
  Returns maximum length of the VL array elements
-
-

INPUTS

-
  dataset_id    - dataset identifier
-  type_id       - datatype identifier
-  space_id      - dataspace identifier
-
-

OUTPUTS

-
  size          - buffer size
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  October 15, 2002
-
-

SOURCE

-
  SUBROUTINE h5dvlen_get_max_len_f(dataset_id, type_id, space_id, len,  hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dataset_id      ! Dataset identifier
-    INTEGER(HID_T), INTENT(IN) :: type_id         ! Datatype identifier
-    INTEGER(HID_T), INTENT(IN) :: space_id        ! Dataspace identifier
-    INTEGER(SIZE_T),  INTENT(OUT)  :: len         ! Maximum length of the element
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Ef_c.html b/fortran/doc/DevelGuide/src/H5Ef_c.html deleted file mode 100644 index 79b7914..0000000 --- a/fortran/doc/DevelGuide/src/H5Ef_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Ef.c - - - - - -
-
- -

H5Ef

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5E Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Eff_f90.html b/fortran/doc/DevelGuide/src/H5Eff_f90.html deleted file mode 100644 index 7eb95e6..0000000 --- a/fortran/doc/DevelGuide/src/H5Eff_f90.html +++ /dev/null @@ -1,197 +0,0 @@ - - - - - - - -./src/H5Eff.f90 - - - - - -
-
- -

H5E

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5E
-
-

FILE

-
  fortran/src/H5Eff.f90
-
-

PURPOSE

-
  This Module contains Fortran interfaces for H5E functions.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5E function to the module you must add the function name
-  to the Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5eclear_f

- -

[ Top ] [ H5E ] [ Subroutines ]

-

NAME

-
  h5eclear_f
-
-

PURPOSE

-
  Clears the error stack for the current thread.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  estack_id     - Error Stack id
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  April 6, 2001
-
-  Added optional error stack identifier in order to bring
-  the function in line with the h5eclear2 routine.
-  MSB, July 9, 2009
-
-

SOURCE

-
  SUBROUTINE h5eclear_f(hdferr, estack_id)
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: estack_id
-
- -
- -

h5eget_major_f

- -

[ Top ] [ H5E ] [ Subroutines ]

-

NAME

-
  h5eget_major_f
-
-

PURPOSE

-
  Returns a character string describing an error specified
-  by a major error number.
-
-

INPUTS

-
  error_no      - major error number
-
-

OUTPUTS

-
  name          - character string describing the error
-  namelen       - number of characters in the name buffer
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  April 6, 2001
-
-

SOURCE

-
  SUBROUTINE h5eget_major_f(error_no, name, namelen, hdferr)
-    INTEGER, INTENT(IN) :: error_no        ! Major error number
-    CHARACTER(LEN=*), INTENT(OUT) :: name  ! Character string describing
-                                           ! the error.
-    INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters
-                                           ! in name.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5eget_minor_f

- -

[ Top ] [ H5E ] [ Subroutines ]

-

NAME

-
  h5eget_minor_f
-
-

PURPOSE

-
  Returns a character string describing an error specified
-  by a minor error number.
-
-

INPUTS

-
  error_no      - minor error number
-
-

OUTPUTS

-
  name          - character string describing the error
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  April 6, 2001
-
-

SOURCE

-
  SUBROUTINE h5eget_minor_f(error_no, name, hdferr)
-    INTEGER, INTENT(IN) :: error_no       ! Major error number
-    CHARACTER(LEN=*), INTENT(OUT) :: name ! Character string describing
-                                          ! the error
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5eprint_f

- -

[ Top ] [ H5E ] [ Subroutines ]

-

NAME

-
  h5eprint_f
-
-

PURPOSE

-
  Prints the error stack in a default manner.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  name          - name of the file that contains print output
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  April 6, 2001
-
-

SOURCE

-
  SUBROUTINE h5eprint_f(hdferr, name)
-    CHARACTER(LEN=*), OPTIONAL, INTENT(IN) :: name ! File name
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5FDmpiof_c.html b/fortran/doc/DevelGuide/src/H5FDmpiof_c.html deleted file mode 100644 index 74143d2..0000000 --- a/fortran/doc/DevelGuide/src/H5FDmpiof_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5FDmpiof.c - - - - - -
-
- -

H5FDmpiof

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for Parallel Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5FDmpioff_f90.html b/fortran/doc/DevelGuide/src/H5FDmpioff_f90.html deleted file mode 100644 index 473b5db..0000000 --- a/fortran/doc/DevelGuide/src/H5FDmpioff_f90.html +++ /dev/null @@ -1,253 +0,0 @@ - - - - - - - -./src/H5FDmpioff.f90 - - - - - -
-
- -

H5FDMPIO

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5FDMPIO
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5P functions needed by
-  parallel MPI programs.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5P function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5pget_dxpl_mpio_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pget_dxpl_mpio_f
-
-

PURPOSE

-
  Returns the data transfer mode.
-
-

INPUTS

-
  prp_id        - data transfer property list identifier
-
-

OUTPUTS

-
  data_xfer_mode- transfer mode; possible values are:
-                     H5FD_MPIO_INDEPENDENT_F
-                     H5FD_MPIO_COLLECTIVE_F
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  November, 2000
-
-

SOURCE

-
  SUBROUTINE h5pget_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id   ! Property list identifier
-    INTEGER, INTENT(OUT) :: data_xfer_mode ! Data transfer mode. Possible values are:
-                                           ! H5FD_MPIO_INDEPENDENT_F
-                                           ! H5FD_MPIO_COLLECTIVE_F
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5pget_fapl_mpio_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pget_fapl_mpio_f
-
-

PURPOSE

-
  Returns MPI communicator information.
-
-

INPUTS

-
  prp_id        - file access property list identifier
-
-

OUTPUTS

-
  comm          - MPI-2 communicator
-  info          - MPI-2 info object
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  November, 2000
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_mpio_f(prp_id, comm, info, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    INTEGER, INTENT(OUT) :: comm ! buffer to return communicator
-    INTEGER, INTENT(OUT) :: info ! buffer to return info object
-                                 ! as defined in MPI_FILE_OPEN of MPI-2
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- -

h5pget_fapl_mpiposix_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pget_fapl_mpiposix_f
-
-

PURPOSE

-
  Returns MPI communicator information.
-
-

INPUTS

-
  prp_id        - file access property list identifier
-
-

OUTPUTS

-
  comm          - MPI-2 communicator
-  use_gpfs      - flag to use GPFS hints
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  May 6, 2003
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_mpiposix_f(prp_id, comm, use_gpfs, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    INTEGER, INTENT(OUT) :: comm         ! Buffer to return communicator
-    LOGICAL, INTENT(OUT) :: use_gpfs
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5pset_dxpl_mpio_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pset_dxpl_mpio_f
-
-

PURPOSE

-
  Sets data transfer mode.
-
-

INPUTS

-
  prp_id         - data transfer property list identifier
-  data_xfer_mode - transfer mode; possible values are:
-                     H5FD_MPIO_INDEPENDENT_F
-                     H5FD_MPIO_COLLECTIVE_F
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  November, 2000
-
-

SOURCE

-
  SUBROUTINE h5pset_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    INTEGER, INTENT(IN) :: data_xfer_mode ! Data transfer mode. Possible values are:
-                                          ! H5FD_MPIO_INDEPENDENT_F
-                                          ! H5FD_MPIO_COLLECTIVE_F
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pset_fapl_mpio_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_mpio_f
-
-

PURPOSE

-
  Stores MPI IO communicator information to the file
-  access property list.
-
-

INPUTS

-
  prp_id        - file access property list identifier
-  comm          - MPI-2 communicator
-  info          - MPI-2 info object
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  November, 2000
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_mpio_f(prp_id, comm, info, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    INTEGER, INTENT(IN) :: comm ! MPI communicator to be used for file open
-                                ! as defined in MPI_FILE_OPEN of MPI-2
-    INTEGER, INTENT(IN) :: info ! MPI info object to be used for file open
-                                ! as defined in MPI_FILE_OPEN of MPI-2
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-
- -
- -

h5pset_fapl_mpiposix_f

- -

[ Top ] [ H5FDMPIO ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_mpiposix_f
-
-

PURPOSE

-
  Stores MPI IO communicator information to the file
-  access property list.
-
-

INPUTS

-
  prp_id        - file access property list identifier
-  comm          - MPI-2 communicator
-  use_gpfs      - logical flag to use the GPFS hints
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  May 6, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_mpiposix_f(prp_id, comm, use_gpfs, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    INTEGER, INTENT(IN) :: comm ! MPI communicator to be used for file open
-                                ! as defined in MPI_FILE_OPEN of MPI-2
-    LOGICAL, INTENT(IN) :: use_gpfs
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Ff_c.html b/fortran/doc/DevelGuide/src/H5Ff_c.html deleted file mode 100644 index c91a62d..0000000 --- a/fortran/doc/DevelGuide/src/H5Ff_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Ff.c - - - - - -
-
- -

H5Ff

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5F Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Fff_f90.html b/fortran/doc/DevelGuide/src/H5Fff_f90.html deleted file mode 100644 index b0164c9..0000000 --- a/fortran/doc/DevelGuide/src/H5Fff_f90.html +++ /dev/null @@ -1,653 +0,0 @@ - - - - - - - -./src/H5Fff.f90 - - - - - -
-
- -

H5F

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5F
-
-

FILE

-
  H5Fff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5F functions.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5F function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5fclose_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fclose_f
-
-

PURPOSE

-
  Closes HDF5 file.
-
-

INPUTS

-
  file_id       - file identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fclose_f(file_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5fcreate_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fcreate_f
-
-

PURPOSE

-
  Creates HDF5 files.
-
-

INPUTS

-
  name          - name of the file to create
-  access_flags  - File access flags. Allowable values are:
-                   H5F_ACC_TRUNC_F
-                   H5F_ACC_EXCL_F
-
-

OUTPUTS

-
  file_id       - file identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  creation_prp  - file creation property list identifier
-  access_prp    - file access property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fcreate_f(name, access_flags, file_id, hdferr, &
-       creation_prp, access_prp)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
-    INTEGER, INTENT(IN) :: access_flags    ! File access flags
-    INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp
-                                           ! File creation propertly
-                                           ! list identifier
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
-                                           ! File access property list
-                                           ! identifier
-
- -
- -

h5fflush_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fflush_f
-
-

PURPOSE

-
  Flushes all buffers associated WITH a file to disk
-
-

INPUTS

-
  object_id     - identifier of object used to identify the file.
-  scope         - specifies the scope of the flushing action.
-                  Possible values are:
-                    H5F_SCOPE_GLOBAL_F
-                    H5F_SCOPE_LOCAL_F
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  creation_prp  - file creation property list identifier
-  access_prp    - file access property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fflush_f(object_id, scope, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: object_id !identifier for any object
-                                            !associate with a file,
-                                            !including the file itself,
-                                            !a dataset, a group, an
-                                            !attribute, or a named
-                                            !data type
-
-    INTEGER, INTENT(IN) :: scope            !scope of the flushing
-                                            !action, possible values
-                                            !are: H5F_SCOPE_GLOBAL_F
-                                            ! which flushes the entire
-                                            !virtual file,
-                                            !and H5F_SCOPE_LOCAL_F
-                                            !which flushes only the
-                                            !specified file.
-
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5fget_access_plist_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_access_plist_f
-
-

PURPOSE

-
  Returns a file access property list identifier.
-
-

INPUTS

-
  file_id       - identifier of a file to creation property list of
-
-

OUTPUTS

-
  access_id     - access property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fget_access_plist_f(file_id, access_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier
-    INTEGER(HID_T), INTENT(OUT) :: access_id   ! File access property
-                                               ! list identifier
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5fget_create_plist_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_create_plist_f
-
-

PURPOSE

-
  Returns a file creation property list identifier.
-
-

INPUTS

-
  file_id       - identifier of a file to creation property list of
-
-

OUTPUTS

-
  prop_id       - creation property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fget_create_plist_f(file_id, prop_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id    ! File identifier
-    INTEGER(HID_T), INTENT(OUT) :: prop_id   ! File creation property
-                                             ! list identifier
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5fget_filesize_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_filesize_f
-
-

PURPOSE

-
  Retrieves the file size of the HDF5 file.
-
-

INPUTS

-
  file_id       - file identifier
-
-

OUTPUTS

-
  size          - file size
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  July 7, 2004
-
-

SOURCE

-
  SUBROUTINE h5fget_filesize_f(file_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id  ! file identifier
-    INTEGER(HSIZE_T), INTENT(OUT) :: size  ! Size of the file
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code: 0 on success,
-                                           !     -1 if fail
-
- -
- -

h5fget_freespace_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_freespace_f
-
-

PURPOSE

-
  Get amount of free space within a file
-
-

INPUTS

-
  file_id       - file identifier
-
-

OUTPUTS

-
  free_space    - amount of free space in file
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Quincey Koziol
-  October 7, 2003
-
-

SOURCE

-
  SUBROUTINE h5fget_freespace_f(file_id, free_space, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
-    INTEGER(HSSIZE_T), INTENT(OUT) :: free_space
-                                          ! amount of free space in file
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5fget_name_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_name_f
-
-

PURPOSE

-
  Gets the name of the file from the object identifier
-
-

INPUTS

-
  obj_id        - object identifier
-
-

OUTPUTS

-
  buf           - buffer to store the read name
-  size          - actual size of the name
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  July 6, 2004
-
-

SOURCE

-
  SUBROUTINE h5fget_name_f(obj_id, buf, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id   ! Object identifier
-    CHARACTER(LEN=*), INTENT(INOUT) :: buf
-                                           ! Buffer to hold file name
-    INTEGER(SIZE_T), INTENT(OUT) :: size   ! Size of the file name
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code: 0 on success,
-                                           !     -1 if fail
-
- -
- -

h5fget_obj_count_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_obj_count_f
-
-

PURPOSE

-
  Gets number of the objects open within a file
-
-

INPUTS

-
  file_id       - file identifier
-  obj_type      - type of the object; possible values are:
-                    H5F_OBJ_FILE_F
-                    H5F_OBJ_DATASET_F
-                    H5F_OBJ_GROUP_F
-                    H5F_OBJ_DATATYPE_F
-                    H5F_OBJ_ALL_F
-
-

OUTPUTS

-
  obj_count     - number of open objects
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  September 30, 2002
-
-

HISTORY

-
  Changed the type of obj_count to INTEGER(SIZE_T)
-  September 25, 2008 EIP
-
-

SOURCE

-
  SUBROUTINE h5fget_obj_count_f(file_id, obj_type, obj_count, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
-    INTEGER, INTENT(IN)  :: obj_type      ! Object type
-    INTEGER(SIZE_T), INTENT(OUT) :: obj_count
-                                          ! Number of open objects
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5fget_obj_ids_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fget_obj_ids_f
-
-

PURPOSE

-
  Get list of open objects identifiers within a file
-
-

INPUTS

-
  file_id       - file identifier
-  obj_type      - type of the object; possible values are:
-                    H5F_OBJ_FILE_F
-                    H5F_OBJ_DATASET_F
-                    H5F_OBJ_GROUP_F
-                    H5F_OBJ_DATATYPE_F
-                    H5F_OBJ_ALL_F
-
-

OUTPUTS

-
  obj_ids       - array of open object identifiers
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  num_objs      - number of open objects
-
-

AUTHOR

-
  Elena Pourmal
-  September 30, 2002
-
-

HISTORY

-
  Added optional parameter num_objs for number of open objects
-  of the specified type and changed type of max_obj to
-  INTEGER(SIZE_T)
-  September 25, 2008 EIP
-
-

SOURCE

-
  SUBROUTINE h5fget_obj_ids_f(file_id, obj_type, max_objs, obj_ids, hdferr, num_objs)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier
-    INTEGER, INTENT(IN)  :: obj_type           ! Object type
-    INTEGER(SIZE_T), INTENT(IN)  :: max_objs   ! Maximum # of objects to retrieve
-    INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids
-                                               ! Array of open objects iidentifiers
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-    INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: num_objs ! number of open objects
-
- -
- -

h5fis_hdf5_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fis_hdf5_f
-
-

PURPOSE

-
  Determines whether a file is in the HDF5 format.
-
-

INPUTS

-
  name          - name of the file to check
-
-

OUTPUTS

-
  status        - indicates if file is and HDF5 file
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fis_hdf5_f(name, status, hdferr)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
-    LOGICAL, INTENT(OUT) :: status         ! Indicates if file
-                                           ! is an HDF5 file
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5fmount_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fmount_f
-
-

PURPOSE

-
  Mounts a file.
-
-

INPUTS

-
  loc_id        - the identifier for of file or group in
-                  which name is defined
-  name          - the name of the group onto which the file
-                  specified by child_id is to be mounted.
-  child_id      - the identifier of the file to be mounted.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  access_prp    - the identifier of the property list to be used
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fmount_f(loc_id, name, child_id, hdferr, access_prp)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group
-                                           ! in which dsetname is defined
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the group
-    INTEGER(HID_T), INTENT(IN) :: child_id ! File identifier for the
-                                           ! file to be mounted
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
-                                           ! File access property list
-                                           ! identifier
-
- -
- -

h5fopen_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5fopen_f
-
-

PURPOSE

-
  Opens HDF5 file.
-
-

INPUTS

-
  name          - name of the file to acecss
-  access_flags  - File access flags. Allowable values are:
-                   H5F_ACC_RDWR_F
-                   H5F_ACC_RDONLY_F
-
-

OUTPUTS

-
  file_id       - file identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  access_prp    - file access property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5fopen_f(name, access_flags, file_id, hdferr, access_prp)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
-    INTEGER, INTENT(IN) :: access_flags    ! File access flags
-    INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp
-                                           ! File access property list
-                                           ! identifier
-
- -
- -

h5freopen_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5freopen_f
-
-

PURPOSE

-
  Reopens HDF5 file.
-
-

INPUTS

-
  file_id       - identifier of a file for which an
-                  additional identifier is required
-
-

OUTPUTS

-
  ret_file_id   - new file identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5freopen_f(file_id, ret_file_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: file_id      ! File identifier
-    INTEGER(HID_T), INTENT(OUT) :: ret_file_id ! New File identifier
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5funmount_f

- -

[ Top ] [ H5F ] [ Subroutines ]

-

NAME

-
  h5funmount_f
-
-

PURPOSE

-
  Unmounts a file.
-
-

INPUTS

-
  loc_id        - the identifier for of file or group in
-                  which name is defined
-  name          - the name of the mount point
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5funmount_f(loc_id, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for file or group
-                                           ! at which the specified file
-                                           ! is to be unmounted
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the mount point
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Gf_c.html b/fortran/doc/DevelGuide/src/H5Gf_c.html deleted file mode 100644 index a71f0e8..0000000 --- a/fortran/doc/DevelGuide/src/H5Gf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Gf.c - - - - - -
-
- -

H5Gf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5G Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Gff_f90.html b/fortran/doc/DevelGuide/src/H5Gff_f90.html deleted file mode 100644 index 74ec2f4..0000000 --- a/fortran/doc/DevelGuide/src/H5Gff_f90.html +++ /dev/null @@ -1,840 +0,0 @@ - - - - - - - -./src/H5Gff.f90 - - - - - -
-
- -

H5G

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5G
-
-

FILE

-
  fortran/src/H5Gff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5G functions.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5G function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5gclose_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gclose_f
-
-

PURPOSE

-
  Closes the specified group.
-
-

INPUTS

-
  grp_id        - group identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gclose_f(grp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: grp_id  ! Group identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

H5Gcreate_anon_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  H5Gcreate_anon_f
-
-

PURPOSE

-
  Creates a new empty group without linking it into the file structure.
-
-

INPUTS

-
  loc_id        - Location identifier
-
-

OUTPUTS

-
  grp_id        - group identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  gcpl_id       - Group creation property list identifier
-  gapl_id       - Group access property list identifier
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 15, 2008
-
-

SOURCE

-
  SUBROUTINE h5Gcreate_anon_f(loc_id, grp_id, hdferr, gcpl_id, gapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    INTEGER(HID_T), INTENT(OUT) :: grp_id  ! Group identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id  ! Property list for group creation
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id  ! Property list for group access
-
- -
- -

h5gcreate_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gcreate_f
-
-

PURPOSE

-
  Creates a new group.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - group name at the specified location
-
-

OUTPUTS

-
  grp_id        - group identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  size_hint     - a parameter indicating the number of bytes to
-                  reserve for the names that will appear in the group
-  lcpl_id       - Property list for link creation
-  gcpl_id       - Property list for group creation
-  gapl_id       - Property list for group access
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-  Added additional optional paramaters in 1.8
-  MSB - February 27, 2008
-
-

SOURCE

-
  SUBROUTINE h5gcreate_f(loc_id, name, grp_id, hdferr, size_hint, lcpl_id, gcpl_id, gapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the group
-    INTEGER(HID_T), INTENT(OUT) :: grp_id  ! Group identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(SIZE_T), OPTIONAL, INTENT(IN) :: size_hint
-                                           ! Parameter indicating
-                                           ! the number of bytes
-                                           ! to reserve for the
-                                           ! names that will appear
-                                           ! in the group. Set to OBJECT_NAMELEN_DEFAULT_F
-                                           ! if using any of the optional
-                                           ! parameters lcpl_id, gcpl_id, and/or gapl_id when not
-                                           ! using keywords in specifying the optional parameters
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id  ! Property list for link creation
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id  ! Property list for group creation
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id  ! Property list for group access
-
- -
- -

h5gget_comment_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_comment_f
-
-

PURPOSE

-
  Retrieves comment for specified object.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the object at specified location
-  size          - size of the buffer required to hold comment
-
-

OUTPUTS

-
  buffer        - buffer to hold object's comment
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gget_comment_f(loc_id, name, size, buffer, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Current name of an object
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Maximum number of buffer
-    CHARACTER(LEN=size), INTENT(OUT) :: buffer
-                                           ! Buffer to hold a comment
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

H5Gget_create_plist_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  H5Gget_create_plist_f
-
-

PURPOSE

-
  Gets a group creation property list identifier.
-
-

INPUTS

-
  grp_id        - group identifier
-
-

OUTPUTS

-
  gcpl_id       - Group creation property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 15, 2008
-
-

SOURCE

-
  SUBROUTINE h5gget_create_plist_f(grp_id, gcpl_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN)  :: grp_id  ! Group identifier
-    INTEGER(HID_T), INTENT(OUT) :: gcpl_id ! Property list for group creation
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5gget_info_by_idx_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_info_by_idx_f
-
-

PURPOSE

-
  Retrieves information about a group, according to the group’s position within an index.
-
-

INPUTS

-
  loc_id        - File or group identifier
-  group_name    - Name of group containing group for which information is to be retrieved
-  index_type    - Index type
-  order         - Order of the count in the index
-  n             - Position in the index of the group for which information is retrieved
-
-

OUTPUTS

-
  storage_type  - Type of storage for links in group
-                    H5G_STORAGE_TYPE_COMPACT: Compact storage
-                    H5G_STORAGE_TYPE_DENSE: Indexed storage
-                    H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure
-  nlinks        - Number of links in group
-  max_corder    - Current maximum creation order value for group
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-  mounted       - Whether group has a file mounted on it
-
-

NOTES

-
  In C the output is defined as a structure: H5G_info_t
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 18, 2008
-
-

HISTORY

-
  Added 'mounted' paramater
-  M. Scot Breitenfeld
-  July 16, 2008
-
-

SOURCE

-
  SUBROUTINE h5gget_info_by_idx_f(loc_id, group_name, index_type, order, n, &
-       storage_type, nlinks, max_corder, hdferr, lapl_id, mounted)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id       ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved
-    INTEGER, INTENT(IN) :: index_type ! Index type
-    INTEGER, INTENT(IN) :: order      ! Order of the count in the index
-    INTEGER(HSIZE_T), INTENT(IN) :: n ! Position in the index of the group for which information is retrieved
-
-    INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group:
-                                         !   H5G_STORAGE_TYPE_COMPACT_F: Compact storage
-                                         !   H5G_STORAGE_TYPE_DENSE_F: Indexed storage
-                                         !   H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure
-    INTEGER, INTENT(OUT) :: nlinks      ! Number of links in group
-    INTEGER, INTENT(OUT) :: max_corder  ! Current maximum creation order value for group
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code:
-                                        ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-    LOGICAL, INTENT(OUT), OPTIONAL :: mounted       ! Whether group has a file mounted on it
-
- -
- -

h5gget_info_by_name_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_info_by_name_f
-
-

PURPOSE

-
  Retrieves information about a group.
-
-

INPUTS

-
  loc_id        - File or group identifier
-  group_name    - Name of group containing group for which information is to be retrieved
-
-

OUTPUTS

-
  storage_type  - Type of storage for links in group
-                    H5G_STORAGE_TYPE_COMPACT: Compact storage
-                    H5G_STORAGE_TYPE_DENSE: Indexed storage
-                    H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure
-  nlinks        - Number of links in group
-  max_corder    - Current maximum creation order value for group
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-  mounted       - Whether group has a file mounted on it
-
-

NOTES

-
  In C the output is defined as a structure: H5G_info_t
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 18, 2008
-
-

HISTORY

-
  Added 'mounted' paramater
-  M. Scot Breitenfeld
-  July 16, 2008
-
-

SOURCE

-
  SUBROUTINE h5gget_info_by_name_f(loc_id, group_name, &
-       storage_type, nlinks, max_corder, hdferr, lapl_id, mounted)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id       ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved
-
-    INTEGER, INTENT(OUT) :: storage_type  ! Type of storage for links in group:
-                                          ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage
-                                          ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage
-                                          ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure
-    INTEGER, INTENT(OUT) :: nlinks        ! Number of links in group
-    INTEGER, INTENT(OUT) :: max_corder    ! Current maximum creation order value for group
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          !   0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-    LOGICAL, INTENT(OUT), OPTIONAL :: mounted       ! Whether group has a file mounted on it
-
- -
- -

h5gget_info_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_info_f
-
-

PURPOSE

-
  Retrieves information about a group
-
-

INPUTS

-
  group_id      - Group identifier
-
-

OUTPUTS

-
  storage_type  - Type of storage for links in group
-                    H5G_STORAGE_TYPE_COMPACT: Compact storage
-                    H5G_STORAGE_TYPE_DENSE: Indexed storage
-                    H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure
-  nlinks        - Number of links in group
-  max_corder    - Current maximum creation order value for group
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  mounted       - Whether group has a file mounted on it
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 15, 2008
-
-

NOTES

-
  In C the output is defined as a structure: H5G_info_t
-
-

HISTORY

-
  - Added 'mounted' paramater
-    M. Scot Breitenfeld
-    July 16, 2008
-
-

SOURCE

-
  SUBROUTINE h5gget_info_f(group_id, storage_type, nlinks, max_corder, hdferr, mounted)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: group_id ! Group identifier
-
-    INTEGER, INTENT(OUT) :: storage_type  ! Type of storage for links in group:
-                                          ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage
-                                          ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage
-                                          ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure
-    INTEGER, INTENT(OUT) :: nlinks        ! Number of links in group
-    INTEGER, INTENT(OUT) :: max_corder    ! Current maximum creation order value for group
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-    LOGICAL, INTENT(OUT), OPTIONAL :: mounted  ! Whether group has a file mounted on it
-
- -
- -

h5gget_linkval_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_linkval_f
-
-

PURPOSE

-
  Returns the name of the object that the symbolic link
-  points to.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - symbolic link to the object whose name
-                  is to be returned.
-  size          - maximum number of characters to be returned
-
-

OUTPUTS

-
  buffer        - a buffer to hold the name of the object
-  being sought
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gget_linkval_f(loc_id, name, size, buffer, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Current name of an object
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Maximum number of buffer
-    CHARACTER(LEN=size), INTENT(OUT) :: buffer
-                                           ! Buffer to hold a name of
-                                           ! the object symbolic link
-                                           ! points to
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5gget_obj_info_idx_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gget_obj_info_idx_f
-
-

PURPOSE

-
  Returns name and type of the group member identified by
-  its index.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the group at the specified location
-  idx           - object index (zero-based)
-
-

OUTPUTS

-
  obj_name      - object name
-  obj_type      - object type
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gget_obj_info_idx_f(loc_id, name, idx, &
-       obj_name, obj_type, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the group
-    INTEGER, INTENT(IN) :: idx             ! Index of member object
-    CHARACTER(LEN=*), INTENT(OUT) :: obj_name   ! Name of the object
-    INTEGER, INTENT(OUT) :: obj_type       ! Object type
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5glink2_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5glink2_f
-
-

PURPOSE

-
  Creates a link of the specified type from new_name
-  to current_name. current_name and new_name are interpreted
-  releative to current and new location identifiers.
-
-

INPUTS

-
  cur_loc_id    - location identifier
-  cur_name      - name of the existing object if link is a
-                  hard link. Can be anything for the soft link.
-  link_type     - link type; possible values are:
-                    H5G_LINK_HARD_F (0)
-                    H5G_LINK_SOFT_F (1)
-  new_loc_id    - new location identifier
-  new_name      - new name for the object
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  September 25, 2002
-
-

SOURCE

-
  SUBROUTINE h5glink2_f(cur_loc_id, cur_name, link_type, new_loc_id, &
-       new_name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: cur_loc_id ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: cur_name
-                                             ! Current name of an object
-    INTEGER, INTENT(IN) :: link_type         ! link type
-                                                 ! Possible values are:
-                                                 ! H5G_LINK_HARD_F (0) or
-                                                 ! H5G_LINK_SOFT_F (1)
-
-    INTEGER(HID_T), INTENT(IN) :: new_loc_id ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5glink_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5glink_f
-
-

PURPOSE

-
  Creates a link of the specified type from new_name
-  to current_name.
-
-

INPUTS

-
  loc_id        - location identifier
-  link_type     - link type; possible values are:
-                    H5G_LINK_HARD_F (0)
-                    H5G_LINK_SOFT_F (1)
-  current_name  - name of the existing object if link is a
-                  hard link. Can be anything for the soft link
-  new_name      - new name for the object
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5glink_f(loc_id, link_type, current_name, &
-       new_name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    INTEGER, INTENT(IN) :: link_type       ! link type
-                                                   ! Possible values are:
-                                                   ! H5G_LINK_HARD_F (0) or
-                                                   ! H5G_LINK_SOFT_F (1)
-
-    CHARACTER(LEN=*), INTENT(IN) :: current_name
-                                                   ! Current name of an object
-    CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5gmove2_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gmove2_f
-
-

PURPOSE

-
  Renames an object within an HDF5 file.
-
-

INPUTS

-
  src_loc_id    - original location identifier
-  src_name      - object's name at specified original location
-  dst_loc_id    - original location identifier
-  dst_name      - object's new name
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  September 25, 2002
-
-

SOURCE

-
  SUBROUTINE h5gmove2_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN)   :: src_loc_id  ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: src_name    ! Original name of an object
-    INTEGER(HID_T), INTENT(IN)   :: dst_loc_id  ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: dst_name    ! New name of an object
-    INTEGER, INTENT(OUT)         :: hdferr      ! Error code
-
- -
- -

h5gmove_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gmove_f
-
-

PURPOSE

-
  Renames an object within an HDF5 file.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - object's name at specified location
-  new_name      - object's new name
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gmove_f(loc_id, name, new_name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id     ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Current name of an object
-    CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5gn_members_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gn_members_f
-
-

PURPOSE

-
  Returns the number of group members.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the group at the specified location
-
-

OUTPUTS

-
  nmembers      - number of group members
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gn_members_f(loc_id, name, nmembers, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-            CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the group
-            INTEGER, INTENT(OUT) :: nmembers       ! Number of members in the
-                                                   ! group
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5gopen_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gopen_f
-
-

PURPOSE

-
  Opens an existing group.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the group to open
-
-

OUTPUTS

-
  grp_id        - group identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  gapl_id       - Group access property list identifier
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-  Added 1.8 (optional) parameter gapl_id
-  February, 2008 M. Scot Breitenfeld
-
-

SOURCE

-
  SUBROUTINE h5gopen_f(loc_id, name, grp_id, hdferr, gapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the group
-    INTEGER(HID_T), INTENT(OUT) :: grp_id  ! File identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id  ! Group access property list identifier
-
- -
- -

h5gset_comment_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gset_comment_f
-
-

PURPOSE

-
  Sets comment for specified object.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the object
-  comment       - comment to set for the object
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gset_comment_f(loc_id, name, comment, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Current name of an object
-    CHARACTER(LEN=*), INTENT(IN) :: comment ! New name of an object
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5gunlink_f

- -

[ Top ] [ H5G ] [ Subroutines ]

-

NAME

-
  h5gunlink_f
-
-

PURPOSE

-
  Removes the specified name from the group graph and
-  decrements the link count for the object to which name
-  points
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the object to unlink
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5gunlink_f(loc_id, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of an object
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5If_c.html b/fortran/doc/DevelGuide/src/H5If_c.html deleted file mode 100644 index 8dccce7..0000000 --- a/fortran/doc/DevelGuide/src/H5If_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5If.c - - - - - -
-
- -

H5If

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5I Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Iff_f90.html b/fortran/doc/DevelGuide/src/H5Iff_f90.html deleted file mode 100644 index 5987581..0000000 --- a/fortran/doc/DevelGuide/src/H5Iff_f90.html +++ /dev/null @@ -1,304 +0,0 @@ - - - - - - - -./src/H5Iff.f90 - - - - - -
-
- -

H5I

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5I
-
-

FILE

-
  fortran/src/H5Iff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5I functions.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5I function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5idec_ref_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5idec_ref_f
-
-

PURPOSE

-
  Decrements the reference count of an ID
-
-

INPUTS

-
  obj_id        - Object identifier
-
-

OUTPUTS

-
  ref_count     - Current reference count of the ID
-  hdferr:       - Error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Quincey Koziol
-  December  9, 2003
-
-

SOURCE

-
  SUBROUTINE h5idec_ref_f(obj_id, ref_count, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier
-    INTEGER, INTENT(OUT) :: ref_count    ! Current reference count of ID
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5iget_file_id_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iget_file_id_f
-
-

PURPOSE

-
  Obtains file identifier from the object identifier
-
-

INPUTS

-
  obj_id        - object identifier
-
-

OUTPUTS

-
  file_id       - file identifier
-  hdferr:       - error code
-                    Success:  0
-                    Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 23, 2004
-
-

SOURCE

-
  SUBROUTINE h5iget_file_id_f(obj_id, file_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN)  :: obj_id   ! Object identifier
-    INTEGER(HID_T), INTENT(OUT) :: file_id  ! File identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5iget_name_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iget_name_f
-
-

PURPOSE

-
  Gets a name of an object specified by its idetifier.
-
-

INPUTS

-
  obj_id    - attribute identifier
-  buf_size  - size of a buffer to read name in
-
-

OUTPUTS

-
  buf       - buffer to read name in, name will be truncated if
-              buffer is not big enough
-  name_size - name size
-  hdferr:   - error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5iget_name_f(obj_id, buf, buf_size, name_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id      ! Object identifier
-    INTEGER(SIZE_T), INTENT(IN) :: buf_size   ! Buffer size
-    CHARACTER(LEN=*), INTENT(OUT) :: buf      ! Buffer to hold object name
-    INTEGER(SIZE_T), INTENT(OUT) :: name_size ! Actual name size
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code:
-                                              !   0 if successful,
-                                              !   -1 if fail
-
- -
- -

h5iget_ref_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iget_ref_f
-
-

PURPOSE

-
  Retrieves the reference count of an ID
-
-

INPUTS

-
  obj_id        - object identifier
-
-

OUTPUTS

-
  ref_count     - Current reference count of the ID
-  hdferr:         - error code
-  Success:  0
-  Failure: -1
-
-

AUTHOR

-
  Quincey Koziol
-  December  9, 2003
-
-

SOURCE

-
  SUBROUTINE h5iget_ref_f(obj_id, ref_count, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier
-    INTEGER, INTENT(OUT) :: ref_count    ! Current reference count of ID
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5iget_type_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iget_type_f
-
-

PURPOSE

-
  Retrieves the type of an object.
-
-

INPUTS

-
  obj_id   - object identifier
-
-

OUTPUTS

-
  type     - type of the object, possible values:
-              H5I_FILE_F
-              H5I_GROUP_F
-              H5I_DATATYPE_F
-              H5I_DATASPACE_F
-              H5I_DATASET_F
-              H5I_ATTR_F
-              H5I_BADID_F
-  hdferr:  - error code
-              Success:  0
-              Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 5, 2001
-
-

SOURCE

-
  SUBROUTINE h5iget_type_f(obj_id, TYPE, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id  ! Object identifier
-    INTEGER, INTENT(OUT) :: TYPE ! type of an object.
-                                 ! possible values are:
-                                 !   H5I_FILE_F
-                                 !   H5I_GROUP_F
-                                 !   H5I_DATATYPE_F
-                                 !   H5I_DATASPACE_F
-                                 !   H5I_DATASET_F
-                                 !   H5I_ATTR_F
-                                 !   H5I_BADID_F
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- -

h5iinc_ref_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iinc_ref_f
-
-

PURPOSE

-
  Increments the reference count of an ID
-
-

INPUTS

-
  obj_id        - object identifier
-
-

OUTPUTS

-
  ref_count     - Current reference count of the ID
-  hdferr:              - error code
-  Success:  0
-  Failure: -1
-
-

AUTHOR

-
  Quincey Koziol
-  December  9, 2003
-
-

SOURCE

-
  SUBROUTINE h5iinc_ref_f(obj_id, ref_count, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier
-    INTEGER, INTENT(OUT) :: ref_count    ! Current reference count of ID
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5iis_valid_f

- -

[ Top ] [ H5I ] [ Subroutines ]

-

NAME

-
  h5iget_file_id_f
-
-

PURPOSE

-
  Check if an ID is valid without producing an error message
-
-

INPUTS

-
  id           - identifier 
-
-

OUTPUTS

-
  valid        - status of id as a valid identifier
-  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 13, 2009
-
-

SOURCE

-
  SUBROUTINE h5iis_valid_f(id, valid, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN)  :: id ! Identifier 
-    LOGICAL, INTENT(OUT) :: valid     ! Status of id as a valid identifier
-    INTEGER, INTENT(OUT) :: hdferr    ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Lf_c.html b/fortran/doc/DevelGuide/src/H5Lf_c.html deleted file mode 100644 index 9adb759..0000000 --- a/fortran/doc/DevelGuide/src/H5Lf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Lf.c - - - - - -
-
- -

H5Lf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5L Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Lff_F03_f90.html b/fortran/doc/DevelGuide/src/H5Lff_F03_f90.html deleted file mode 100644 index 6b9640b..0000000 --- a/fortran/doc/DevelGuide/src/H5Lff_F03_f90.html +++ /dev/null @@ -1,181 +0,0 @@ - - - - - - - -./src/H5Lff_F03.f90 - - - - - -
-
- -

H5L (F03)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5L_PROVISIONAL
-
-

FILE

-
  src/fortran/src/H5Lff_F03.f90
-
-

PURPOSE

-
  This file contains Fortran 90 and Fortran 2003 interfaces for H5L functions.
-  It contains the same functions as H5Lff_DEPRECIATE.f90 but includes the
-  Fortran 2003 functions and the interface listings. This file will be compiled
-  instead of H5Lff_DEPRECIATE.f90 if Fortran 2003 functions are enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5A function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5literate_by_name_f

- -

[ Top ] [ H5L (F03) ] [ Subroutines ]

-

NAME

-
  h5literate_by_name_f
-
-

PURPOSE

-
  Iterates through links in a group.
-
-

INPUTS

-
  loc_id        - File or group identifier specifying location of subject group
-  group_name    - Name of subject group
-  index_type    - Type of index which determines the order
-  order         - Order within index
-  idx           - Iteration position at which to start
-  op            - Callback function passing data regarding the link to the calling application
-  op_data       - User-defined pointer to data required by the application for its processing of the link
-
-

OUTPUTS

-
  idx      - Position at which an interrupted iteration may be restarted
-  hdferr   - Error code:
-               Success:  0
-               Failure: -1
-
-

OPTIONAL PARAMETERS

-
  lapl_id  - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  Augest 18, 2008
-
-

SOURCE

-
  SUBROUTINE h5literate_by_name_f(loc_id, group_name, index_type, order, idx, op, op_data, return_value, hdferr, lapl_id)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id    ! Identifier specifying subject group
-    CHARACTER(LEN=*) :: group_name          ! Name of subject group
-    INTEGER, INTENT(IN) :: index_type       ! Type of index which determines the order:
-                                                ! H5_INDEX_NAME_F - Alpha-numeric index on name
-                                                ! H5_INDEX_CRT_ORDER_F - Index on creation order
-    INTEGER, INTENT(IN) :: order            ! Order within index:
-                                                ! H5_ITER_INC_F - Increasing order
-                                                ! H5_ITER_DEC_F - Decreasing order
-                                                ! H5_ITER_NATIVE_F - Fastest available order
-    INTEGER(HSIZE_T), INTENT(INOUT) :: idx  ! IN : Iteration position at which to start
-                                            ! OUT: Position at which an interrupted iteration may be restarted
-
-    TYPE(C_FUNPTR):: op      ! Callback function passing data regarding the link to the calling application
-    TYPE(C_PTR)   :: op_data ! User-defined pointer to data required by the application for its processing of the link
-
-    INTEGER, INTENT(OUT) :: return_value ! Success:   The return value of the first operator that
-                                         !            returns non-zero, or zero if all members were
-                                         !            processed with no operator returning non-zero.
-
-                                         ! Failure:   Negative if something goes wrong within the
-                                         !            library, or the negative value returned by one
-                                         !            of the operators.
-
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list
-
- -
- -

h5literate_f

- -

[ Top ] [ H5L (F03) ] [ Subroutines ]

-

NAME

-
  h5literate_f
-
-

PURPOSE

-
  Iterates through links in a group.
-
-

INPUTS

-
  group_id      - Identifier specifying subject group
-  index_type    - Type of index which determines the order
-  order         - Order within index
-  idx           - Iteration position at which to start
-  op            - Callback function passing data regarding the link to the calling application
-  op_data       - User-defined pointer to data required by the application for its processing of the link
-
-

OUTPUTS

-
  idx           - Position at which an interrupted iteration may be restarted
-  hdferr        - Error code:
-                    Success:  0
-                    Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  July 8, 2008
-
-

SOURCE

-
  SUBROUTINE h5literate_f(group_id, index_type, order, idx, op, op_data, return_value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: group_id  ! Identifier specifying subject group
-    INTEGER, INTENT(IN) :: index_type       ! Type of index which determines the order:
-                                                ! H5_INDEX_NAME_F - Alpha-numeric index on name
-                                                ! H5_INDEX_CRT_ORDER_F - Index on creation order
-    INTEGER, INTENT(IN) :: order            ! Order within index:
-                                                ! H5_ITER_INC_F - Increasing order
-                                                ! H5_ITER_DEC_F - Decreasing order
-                                                ! H5_ITER_NATIVE_F - Fastest available order
-    INTEGER(HSIZE_T), INTENT(INOUT) :: idx  ! IN : Iteration position at which to start
-                                            ! OUT: Position at which an interrupted iteration may be restarted
-
-    TYPE(C_FUNPTR):: op      ! Callback function passing data regarding the link to the calling application
-    TYPE(C_PTR)   :: op_data ! User-defined pointer to data required by the application for its processing of the link
-
-    INTEGER, INTENT(OUT) :: return_value ! Success:   The return value of the first operator that
-                                         !            returns non-zero, or zero if all members were
-                                         !            processed with no operator returning non-zero.
-
-                                         ! Failure:   Negative if something goes wrong within the
-                                         !            library, or the negative value returned by one
-                                         !            of the operators.
-
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Lff_F90_f90.html b/fortran/doc/DevelGuide/src/H5Lff_F90_f90.html deleted file mode 100644 index 6d1a9bb..0000000 --- a/fortran/doc/DevelGuide/src/H5Lff_F90_f90.html +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - -./src/H5Lff_F90.f90 - - - - - -
-
- -

H5L (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5L_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran 90 interfaces for H5L functions. It contains
-  the same functions as H5Lff_F03.f90 but excludes the Fortran 2003 functions
-  and the interface listings. This file will be compiled instead of H5Lff_F03.f90
-  if Fortran 2003 functions are not enabled.
-
- NOTE
-  Currently contains no functions.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Lff_f90.html b/fortran/doc/DevelGuide/src/H5Lff_f90.html deleted file mode 100644 index 1a209f2..0000000 --- a/fortran/doc/DevelGuide/src/H5Lff_f90.html +++ /dev/null @@ -1,637 +0,0 @@ - - - - - - - -./src/H5Lff.f90 - - - - - -
-
- -

H5L

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5L
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5L functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5L function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5lcopy_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lcopy_f
-
-

PURPOSE

-
  Copies a link from one location to another.
-
-

INPUTS

-
  src_loc_id    - Location identifier of the source link
-  src_name      - Name of the link to be copied
-  dest_loc_id   - Location identifier specifying the destination of the copy
-  dest_name     - Name to be assigned to the NEW copy
-  loc_id        - Identifier of the file or group containing the object
-  name          - Name of the link to delete
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier
-  lapl_id       - Link access property list identifier
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 27, 2008
-
-

SOURCE

-
  SUBROUTINE h5lcopy_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, &
-       lcpl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: src_loc_id  ! Location identifier of the source link
-    CHARACTER(LEN=*), INTENT(IN) :: src_name   ! Name of the link to be copied
-    INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Location identifier specifying the destination of the copy
-    CHARACTER(LEN=*), INTENT(IN) :: dest_name ! Name to be assigned to the NEW copy
-
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-
- -
- -

H5Lcreate_external_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  H5Lcreate_external_f
-
-

PURPOSE

-
  Creates a soft link to an object in a different file.
-
-

INPUTS

-
  file_name     - Name of the file containing the target object. Neither the file nor the target object is
-  required to exist. May be the file the link is being created in.
-  obj_name      - Path within the target file to the target object.
-  link_loc_id   - The file or group identifier for the new link.
-  link_name     - The name of the new link.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier.
-  lapl_id       - Link access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 27, 2008
-
-

SOURCE

-
  SUBROUTINE h5lcreate_external_f(file_name, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: file_name ! Name of the file containing the target object. Neither
-                                              ! the file nor the target object is required to exist.
-                                              ! May be the file the link is being created in.
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of the target object, which must already exist.
-    INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link.
-    CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link.
-
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier.
-
- -
- -

H5Lcreate_hard_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  H5Lcreate_hard_f
-
-

PURPOSE

-
  Creates a hard link to an object.
-
-

INPUTS

-
  obj_loc_id    - The file or group identifier for the target object.
-  obj_name      - Name of the target object, which must already exist.
-  link_loc_id   - The file or group identifier for the new link.
-  link_name     - The name of the new link.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier.
-  lapl_id       - Link access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 27, 2008
-
-

SOURCE

-
  SUBROUTINE h5lcreate_hard_f(obj_loc_id, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_loc_id  ! The file or group identifier for the target object.
-    CHARACTER(LEN=*), INTENT(IN) :: obj_name  ! Name of the target object, which must already exist.
-    INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link.
-    CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link.
-
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) ::   lcpl_id         ! Link creation property list identifier.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) ::   lapl_id         ! Link access property list identifier.
-
- -
- -

H5Lcreate_soft_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  H5Lcreate_soft_f
-
-

PURPOSE

-
  Creates a soft link to an object.
-
-

INPUTS

-
  target_path   - Path to the target object, which is not required to exist.
-  link_loc_id   - The file or group identifier for the new link.
-  link_name     - The name of the new link.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier.
-  lapl_id       - Link access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 20, 2008
-
-

SOURCE

-
  SUBROUTINE h5lcreate_soft_f(target_path, link_loc_id, link_name, hdferr, lcpl_id, lapl_id)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: target_path   ! Path to the target object, which is not required to exist.
-    INTEGER(HID_T), INTENT(IN) :: link_loc_id     ! The file or group identifier for the new link.
-    CHARACTER(LEN=*), INTENT(IN) :: link_name     ! The name of the new link.
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code:
-                                                  !   0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier.
-
- -
- -

h5ldelete_by_idx_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5ldelete_by_idx_f
-
-

PURPOSE

-
  Removes the nth link in a group.
-
-

INPUTS

-
  loc_id        - File or group identifier specifying location of subject group
-  group_name    - Name of subject group
-  index_field   - Type of index; Possible values are:
-                    H5_INDEX_UNKNOWN_F = -1  - Unknown index type
-                    H5_INDEX_NAME_F          - Index on names
-                    H5_INDEX_CRT_ORDER_F     - Index on creation order
-                    H5_INDEX_N_F             - Number of indices defined
-
-  order         - Order within field or index; Possible values are:
-                    H5_ITER_UNKNOWN_F   - Unknown order
-                    H5_ITER_INC_F       - Increasing order
-                    H5_ITER_DEC_F       - Decreasing order
-                    H5_ITER_NATIVE_F    - No particular order, whatever is fastest
-                    H5_ITER_N_F         - Number of iteration orders
-
-  n             - Link for which to retrieve information
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 29, 2008
-
-

SOURCE

-
  SUBROUTINE h5ldelete_by_idx_f(loc_id, group_name, index_field, order, n, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id       ! Identifer for object to which attribute is attached
-    CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of object, relative to location,
-                                               !  from which attribute is to be removed
-    INTEGER, INTENT(IN) :: index_field         ! Type of index; Possible values are:
-                                               !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                               !    H5_INDEX_NAME_F      - Index on names
-                                               !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                               !    H5_INDEX_N_F              - Number of indices defined
-    INTEGER, INTENT(IN) :: order               ! Order in which to iterate over index; Possible values are:
-                                               !    H5_ITER_UNKNOWN_F  - Unknown order
-                                               !    H5_ITER_INC_F      - Increasing order
-                                               !    H5_ITER_DEC_F      - Decreasing order
-                                               !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-                                               !    H5_ITER_N_F     - Number of iteration orders
-    INTEGER(HSIZE_T), INTENT(IN) :: n      ! Offset within index
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code:
-                                           ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id     ! Link access property list
-
- -
- -

h5ldelete_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5ldelete_f
-
-

PURPOSE

-
  Removes a link from a group.
-
-

INPUTS

-
  loc_id        - Identifier of the file or group containing the object
-  name          - Name of the link to delete
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list identifier
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5ldelete_f(loc_id, name, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! Identifier of the file or group containing the object
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of the link to delete
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-
- -
- -

H5Lexists_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  H5Lexists_f
-
-

PURPOSE

-
  Check if a link with a particular name exists in a group.
-
-

INPUTS

-
  loc_id        - Identifier of the file or group to query.
-  name          - Link name to check
-
-

OUTPUTS

-
  link_exists   - link exists status (.TRUE.,.FALSE.)
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 29, 2008
-
-

SOURCE

-
  SUBROUTINE h5lexists_f(loc_id, name, link_exists, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! Identifier of the file or group to query.
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Link name to check.
-    LOGICAL, INTENT(OUT) :: link_exists   ! .TRUE. if exists, .FALSE. otherwise
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id
-                                          ! Link access property list identifier.
-
- -
- -

h5lget_info_by_idx_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lget_info_by_idx_f
-
-

PURPOSE

-
  Retrieves metadata for a link in a group, according to the order within a field or index.
-
-

INPUTS

-
  loc_id        - File or group identifier specifying location of subject group
-  group_name    - Name of subject group
-  index_field   - Index or field which determines the order
-  order         - Order within field or index
-  n             - Link for which to retrieve information
-
-

OUTPUTS

-
            NOTE: In C these are defined as a structure: H5L_info_t
-  corder_valid  - Indicates whether the creation order data is valid for this attribute
-  corder        - Is a positive integer containing the creation order of the attribute
-  cset          - Indicates the character set used for the attribute’s name 
- address        - If the link is a hard link, address specifies the file address that the link points to
- val_size       - If the link is a symbolic link, val_size will be the length of the link value, e.g., 
-                  the length of the name of the pointed-to object with a null terminator.
- hdferr         - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 29, 2008
-
-

HISTORY

-
   Changed the link_type names to match those in C (bug 1720) from,
-   H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F
-   to
-   H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F
-   MSB January 8, 2010.  
-
-

SOURCE

-
  SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, &
-       link_type, f_corder_valid, corder, cset, address, val_size, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id       ! File or group identifier specifying location of subject group  
-    CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group
-    INTEGER, INTENT(IN) :: index_field  ! Index or field which determines the order
-                                        !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                        !    H5_INDEX_NAME_F      - Index on names
-                                        !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                        !    H5_INDEX_N_F             - Number of indices defined
-    INTEGER, INTENT(IN) :: order        ! Order in which to iterate over index; Possible values are:
-                                        !    H5_ITER_UNKNOWN_F  - Unknown order
-                                        !    H5_ITER_INC_F      - Increasing order
-                                        !    H5_ITER_DEC_F      - Decreasing order
-                                        !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-    INTEGER(HSIZE_T), INTENT(IN) :: n   ! Attribute’s position in index
-    INTEGER, INTENT(OUT) :: link_type ! Specifies the link class:
-                                      !  H5L_TYPE_HARD_F      - Hard link
-                                      !  H5L_TYPE_SOFT_F      - Soft link
-                                      !  H5L_TYPE_EXTERNAL_F  - External link
-                                      !  H5L_TYPE_ERROR _F    - Error
-    LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute 
-    INTEGER, INTENT(OUT) :: corder         ! Is a positive integer containing the creation order of the attribute
-    INTEGER, INTENT(OUT) :: cset           ! Indicates the character set used for the attribute’s name
-    INTEGER(HADDR_T), INTENT(OUT) :: address  ! If the link is a hard link, address specifies the file address that the link points to
-    INTEGER(SIZE_T), INTENT(OUT) :: val_size  ! If the link is a symbolic link, val_size will be the length of the link value, e.g., 
-                                              ! the length of the name of the pointed-to object with a null terminator. 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Link access property list
-
- -
- -

h5lget_info_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lget_info_f
-
-

PURPOSE

-
  Returns information about a link.
-
-

INPUTS

-
  link_loc_id   - File or group identifier.
-  link_name     - Name of the link for which information is being sought
-
-

OUTPUTS

-
            NOTE: In C these are contained in the structure H5L_info_t
-
-  cset          - indicates the character set used for link’s name.
-  corder        - specifies the link’s creation order position.
-  corder_valid  - indicates whether the value in corder is valid.
-  link_type     - specifies the link class:
-                    H5L_TYPE_HARD_F     - Hard link
-                    H5L_TYPE_SOFT_F     - Soft link
-                    H5L_TYPE_EXTERNAL_F - External link
-                    H5L_TYPE_ERROR_ F   - Error
-  address       - If the link is a hard link, address specifies the file address that the link points to
-  val_size      - If the link is a symbolic link, val_size will be the length of the link value, e.g., 
-                  the length of the name of the pointed-to object with a null terminator. 
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Link access property list
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 29, 2008
-
-

HISTORY

-
   Changed the link_type names to match those in C (bug 1720) from,
-   H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F
-   to
-   H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F
-   MSB January 8, 2010.
-
-

SOURCE

-
  SUBROUTINE h5lget_info_f(link_loc_id, link_name, &
-       cset, corder, f_corder_valid, link_type, address, val_size, &
-       hdferr, lapl_id)
-    IMPLICIT NONE
-
-    INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier.
-    CHARACTER(LEN=*), INTENT(IN) :: link_name ! Name of the link for which information is being sought
-
-! OUTPUTS  NOTE: In C these are contained in the structure H5L_info_t
-    INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the link’s name.
-    INTEGER, INTENT(OUT) :: corder ! Specifies the link’s creation order position.
-    LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the value in corder is valid.
-    INTEGER, INTENT(OUT) :: link_type ! Specifies the link class:
-                                      !  H5L_TYPE_HARD_F      - Hard link
-                                      !  H5L_TYPE_SOFT_F      - Soft link
-                                      !  H5L_TYPE_EXTERNAL_F  - External link
-                                      !  H5L_TYPE_ERROR _F    - Error
-    INTEGER(HADDR_T), INTENT(OUT) :: address ! If the link is a hard link, address specifies the file address that the link points to
-    INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., 
-                                             ! the length of the name of the pointed-to object with a null terminator. 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Link access property list
-
- -
- -

h5lget_name_by_idx_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lget_name_by_idx_f
-
-

PURPOSE

-
  Retrieves name of the nth link in a group, according to the order within a specified field or index.
-
-

INPUTS

-
  loc_id        - File or group identifier specifying location of subject group
-  group_name    - Name of subject group
-  index_field   - Index or field which determines the order
-  order         - Order within field or index
-  n             - Link for which to retrieve information
-
-

OUTPUTS

-
  name          - Buffer in which link value is returned
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - List access property list identifier.
-  size          - Maximum number of characters of link value to be returned.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 10, 2008
-
-

SOURCE

-
  SUBROUTINE h5lget_name_by_idx_f(loc_id, group_name, index_field, order, n, &
-        name, hdferr, size, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id       ! File or group identifier specifying location of subject group
-    CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group
-    INTEGER, INTENT(IN) :: index_field  ! Index or field which determines the order
-                                        !    H5_INDEX_UNKNOWN_F   - Unknown index type
-                                        !    H5_INDEX_NAME_F      - Index on names
-                                        !    H5_INDEX_CRT_ORDER_F - Index on creation order
-                                        !    H5_INDEX_N_F             - Number of indices defined
-    INTEGER, INTENT(IN) :: order        ! Order in which to iterate over index; Possible values are:
-                                        !    H5_ITER_UNKNOWN_F  - Unknown order
-                                        !    H5_ITER_INC_F      - Increasing order
-                                        !    H5_ITER_DEC_F      - Decreasing order
-                                        !    H5_ITER_NATIVE_F   - No particular order, whatever is fastest
-    INTEGER(HSIZE_T), INTENT(IN) :: n   ! Attribute’s position in index
-    CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer in which link value is returned
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5lis_registered_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lis_registered_f
-
-

PURPOSE

-
  Determines whether a class of user-defined links is registered.
-
-

INPUTS

-
  link_cls_id   - User-defined link class identifier
-
-

OUTPUTS

-
  registered    - .TRUE.  - if the link class has been registered
-                  .FALSE. - if it is unregistered
-  hdferr        - Error code
-  Success:  0
-  Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 29, 2008
-
-

SOURCE

-
  SUBROUTINE h5lis_registered_f(link_cls_id, registered, hdferr)
-    IMPLICIT NONE
-    INTEGER, INTENT(IN) :: link_cls_id  ! User-defined link class identifier
-    LOGICAL, INTENT(OUT) :: registered  ! .TRUE. - if the link class has been registered and
-                                        ! .FALSE. - if it is unregistered
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code:
-                                        ! 0 on success and -1 on failure
-
- -
- -

h5lmove_f

- -

[ Top ] [ H5L ] [ Subroutines ]

-

NAME

-
  h5lmove_f
-
-

PURPOSE

-
  Renames a link within an HDF5 file.
-
-

INPUTS

-
  src_loc_id    - Original file or group identifier.
-  src_name      - Original link name.
-  dest_loc_id   - Destination file or group identifier.
-  dest_name     - NEW link name.
-
-

OUTPUTS

-
  hdferr        - Error code:
-                   0 on success and -1 on failure
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier to be associated WITH the NEW link.
-  lapl_id       - Link access property list identifier to be associated WITH the NEW link.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

SOURCE

-
  SUBROUTINE h5lmove_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, lcpl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: src_loc_id  ! Original file or group identifier.
-    CHARACTER(LEN=*), INTENT(IN) :: src_name  ! Original link name.
-    INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Destination file or group identifier.
-    CHARACTER(LEN=*), INTENT(IN) :: dest_name ! NEW link name.
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code:
-                                              ! 0 on success and -1 on failure
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier
-                                                    ! to be associated WITH the NEW link.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier
-                                                    ! to be associated WITH the NEW link.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Of_c.html b/fortran/doc/DevelGuide/src/H5Of_c.html deleted file mode 100644 index e4a97e9..0000000 --- a/fortran/doc/DevelGuide/src/H5Of_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Of.c - - - - - -
-
- -

H5Of

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5O Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Off_f90.html b/fortran/doc/DevelGuide/src/H5Off_f90.html deleted file mode 100644 index 790810e..0000000 --- a/fortran/doc/DevelGuide/src/H5Off_f90.html +++ /dev/null @@ -1,198 +0,0 @@ - - - - - - - -./src/H5Off.f90 - - - - - -
-
- -

H5O

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5O
-
-

FILE

-
  fortran/src/H5Off.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5O functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5O function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5oclose_f

- -

[ Top ] [ H5O ] [ Subroutines ]

-

NAME

-
  h5oclose_f
-
-

PURPOSE

-
  Closes an object in an HDF5 file.
-
-

INPUTS

-
  object_id     - Object identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  December 17, 2008
-
-

SOURCE

-
  SUBROUTINE h5oclose_f(object_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN)  :: object_id
-    INTEGER,        INTENT(OUT) :: hdferr
-
- -
- -

h5olink_f

- -

[ Top ] [ H5O ] [ Subroutines ]

-

NAME

-
  h5olink_f
-
-

PURPOSE

-
  Creates a hard link to an object in an HDF5 file.
-
-

INPUTS

-
  object_id     - Object to be linked.
-  new_loc_id    - File or group identifier specifying location at which object is to be linked.
-  new_link_name - Name of link to be created, relative to new_loc_id.
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list identifier.
-  lapl_id       - Link access property list identifier.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 21, 2008
-
-

SOURCE

-
  SUBROUTINE h5olink_f(object_id, new_loc_id, new_link_name, hdferr, lcpl_id, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: object_id  ! Object to be linked
-    INTEGER(HID_T), INTENT(IN) :: new_loc_id ! File or group identifier specifying
-                                             ! location at which object is to be linked.
-    CHARACTER(LEN=*), INTENT(IN) :: new_link_name ! Name of link to be created, relative to new_loc_id.
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          !   Success:  0
-                                          !   Failure: -1
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier.
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link creation property list identifier.
-
- -
- -

h5oopen_f

- -

[ Top ] [ H5O ] [ Subroutines ]

-

NAME

-
  h5oopen_f
-
-

PURPOSE

-
  Opens an object in an HDF5 file by location identifier and path name.
-
-

INPUTS

-
  loc_id        - File or group identifier
-  name          - Path to the object, relative to loc_id.
-
-

OUTPUTS

-
  obj_id        - Object identifier for the opened object
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  lapl_id       - Access property list identifier for the link pointing to the object
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 18, 2008
-
-

SOURCE

-
  SUBROUTINE h5oopen_f(loc_id, name, obj_id, hdferr, lapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Path to the object, relative to loc_id
-    INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object identifier for the opened object
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          !   Success:  0
-                                          !   Failure: -1
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id  ! Attribute access property list
-
- -
- -

h5open_by_addr_f

- -

[ Top ] [ H5O ] [ Subroutines ]

-

NAME

-
  h5oopen_by_addr_f 
-
-

PURPOSE

-
  Opens an object using its address within an HDF5 file. 
-
-

INPUTS

-
    loc_id - File or group identifier
-    addr   - Object’s address in the file
- OUTPUTS: 
-    obj_id - Object identifier for the opened object
-    hdferr - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  September 14, 2009
-
-

SOURCE

-
  SUBROUTINE h5oopen_by_addr_f(loc_id, addr, obj_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! File or group identifier
-    INTEGER(HADDR_T), INTENT(IN) :: addr  ! Object’s address in the file
-    INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object identifier for the opened object
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code:
-                                          ! 0 on success and -1 on failure
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Pf_c.html b/fortran/doc/DevelGuide/src/H5Pf_c.html deleted file mode 100644 index 6b8079a..0000000 --- a/fortran/doc/DevelGuide/src/H5Pf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Pf.c - - - - - -
-
- -

H5Pf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5P Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Pff_F03_f90.html b/fortran/doc/DevelGuide/src/H5Pff_F03_f90.html deleted file mode 100644 index 51882ba..0000000 --- a/fortran/doc/DevelGuide/src/H5Pff_F03_f90.html +++ /dev/null @@ -1,832 +0,0 @@ - - - - - - - -./src/H5Pff_F03.f90 - - - - - -
-
- -

H5P (F03)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5P_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran 90 and Fortran 2003 interfaces for H5P functions.
-  It contains the same functions as H5Pff_DEPRECIATE.f90 but includes the
-  Fortran 2003 functions and the interface listings. This file will be compiled
-  instead of H5Pff_DEPRECIATE.f90 if Fortran 2003 functions are enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5P function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5pget_double

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pget_double
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_double(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    DOUBLE PRECISION,   INTENT(OUT), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pcreate_class_f

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pcreate_class_f
-
-

PURPOSE

-
  Create a new property list class
-
-

INPUTS

-
  parent        - Property list identifier of the parent class
-                  Possible values include:
-                   H5P_ROOT_F
-                   H5P_FILE_CREATE_F
-                   H5P_FILE_ACCESS_F
-                   H5P_DATASET_CREATE_F
-                   H5P_DATASET_XFER_F
-                   H5P_FILE_MOUNT_F
-  name          - name of the class we are creating
-
-

OUTPUTS

-
  class         - porperty list class identifier
-  hdferr:       - error code
-
-  Success: 0
-  Failure: -1
-
-

OPTIONAL PARAMETERS

-
  H5P_cls_create_func_t (create) - Callback routine called when a property list is created
-  create_data                    - User pointer to any class creation information needed
-  H5P_cls_copy_func_t   (copy)   - Callback routine called when a property list is copied
-  copy_data                      - User pointer to any class copy information needed
-  H5P_cls_close_func_t  (close)  - Callback routine called when a property list is being closed
-  close_data                     - User pointer to any class close information needed
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

HISTORY

-
  Added callback arguments
-  M. Scot Breitenfeld, July 3, 2008
-
-

SOURCE

-
  SUBROUTINE h5pcreate_class_f(parent, name, class, hdferr, create, create_data, copy, copy_data, close, close_data)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: parent  ! parent property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! name of property tocreate
-    INTEGER(HID_T), INTENT(OUT) :: class  ! property list class identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-    TYPE(C_PTR), OPTIONAL :: create_data, copy_data, close_data
-    TYPE(C_FUNPTR), OPTIONAL :: create, copy, close
-
- -
- -

h5pget_char

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pget_char
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_char(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of property to modify
-    CHARACTER(LEN=*), INTENT(OUT) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5pget_integer

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pget_integer
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_integer(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id    ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to modify
-    INTEGER,   INTENT(OUT), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pget_real

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pget_real
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_real(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify
-    REAL,   INTENT(OUT), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5pinsert_char

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pinsert_char
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_char(plist, name, size, value, hdferr)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist      ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size      ! Size of property value
-    CHARACTER(LEN=*),   INTENT(IN) :: value  ! Property value
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5pinsert_double

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pinsert_double
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_double(plist, name, size, value, hdferr)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    DOUBLE PRECISION, INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pinsert_integer

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pinsert_integer
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_integer(plist, name, size, value, hdferr)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist    ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Size of the property value
-    INTEGER,   INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5pinsert_ptr

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pinsert_ptr
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  June 24, 2008
-
-

SOURCE

-
  SUBROUTINE h5pinsert_ptr(plist, name, size, value, hdferr)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size  ! Size of property value
-    TYPE(c_ptr),   INTENT(IN) :: value   ! Property value
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5pinsert_real

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pinsert_real
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_real(plist, name, size, value, hdferr)
-    USE iso_c_binding
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    REAL,   INTENT(IN), TARGET :: value   ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pregister_char

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pregister_char
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_char(class, name, size, value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class     ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size     ! size of the property value
-    CHARACTER(LEN=*),   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pregister_double

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pregister_double
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_double(class, name, size, value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class  ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size  ! size of the property value
-    DOUBLE PRECISION,   INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5pregister_integer

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pregister_integer
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_integer(class, name, size, value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class    ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Size of the property value
-    INTEGER,   INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5pregister_ptr

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pregister_ptr
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  June 24, 2008
-
-

SOURCE

-
  SUBROUTINE h5pregister_ptr(class, name, size, value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class   ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    TYPE(C_PTR), INTENT(IN) :: value      ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pregister_real

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pregister_real
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_real(class, name, size, value, hdferr)
-    USE ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class   ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! size of the property value
-    REAL,   INTENT(IN), TARGET :: value   ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pset(get)fill_value_f

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pset(get)fill_value_f
-
-

PURPOSE

-
  Sets(gets) fill value for a dataset creation property list
-
-

INPUTS

-
  prp_id        - dataset creation property list identifier
-  type_id       - datatype identifier for fill value
-  fillvalue     - fill value
-
-

OUTPUTS

-
  type_id       - datatype identifier for fill value
-  fillvalue     - fill value
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 14, 2001
-
-  Added the recommended way of passing fillvalue
-  and that is by passing the C address, all other
-  ways are obsolete and should be avoided. June, 2008 MSB
-
-

NOTES

-
  h5pset(get)fill_value_f function is overloaded to support
-  INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes.
-
-

SOURCE

-
  SUBROUTINE h5pset_fill_value_integer(prp_id, type_id, fillvalue, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of
-                                          ! of fillvalue datatype
-                                          ! (in memory)
-    INTEGER, INTENT(IN), TARGET :: fillvalue   ! Fillvalue
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- -

h5pset_char

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pset_char
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_char(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id    ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to modify
-    CHARACTER(LEN=*),   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pset_double

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pset_double
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                    Success:  0
-                    Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_double(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    DOUBLE PRECISION,   INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr                  ! Error code
-
- -
- -

h5pset_integer

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pset_integer
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_integer(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of property to modify
-    INTEGER,   INTENT(IN), TARGET :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5pset_real

- -

[ Top ] [ H5P (F03) ] [ Subroutines ]

-

NAME

-
  h5pset_real
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                    Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_real(prp_id, name, value, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify
-    REAL,   INTENT(IN), TARGET :: value  ! Property value
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Pff_F90_f90.html b/fortran/doc/DevelGuide/src/H5Pff_F90_f90.html deleted file mode 100644 index 5f8d579..0000000 --- a/fortran/doc/DevelGuide/src/H5Pff_F90_f90.html +++ /dev/null @@ -1,715 +0,0 @@ - - - - - - - -./src/H5Pff_F90.f90 - - - - - -
-
- -

H5P (_F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5P_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran 90 interfaces for H5P functions. It contains
-  the same functions as H5Pff_F03.f90 but excludes the Fortran 2003 functions
-  and the interface listings. This file will be compiled instead of H5Pff_F03.f90
-  if Fortran 2003 functions are not enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5P function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5pcreate_class_f

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pcreate_class_f
-
-

PURPOSE

-
  Create a new property list class
-
-

INPUTS

-
  parent        - Property list identifier of the parent class
-                  Possible values include:
-                    H5P_ROOT_F
-                    H5P_FILE_CREATE_F
-                    H5P_FILE_ACCESS_F
-                    H5P_DATASET_CREATE_F
-                    H5P_DATASET_XFER_F
-                    H5P_FILE_MOUNT_F
-  name          - name of the class we are creating
-
-

OUTPUTS

-
  class         - property list class identifier
-  hdferr        - error code
-                   Success: 0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pcreate_class_f(parent, name, class, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: parent  ! parent property list class
-                                          ! identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! name of property tocreate
-    INTEGER(HID_T), INTENT(OUT) :: class  ! property list class identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pget_char

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pget_char
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_char(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id     ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Name of property to modify
-    CHARACTER(LEN=*),   INTENT(OUT) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5pget_double

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pget_double
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_double(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id     ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Name of property to modify
-    DOUBLE PRECISION,   INTENT(OUT) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5pget_integer

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pget_integer
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_integer(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    INTEGER,   INTENT(OUT) :: value       ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pget_real

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pget_real
-
-

PURPOSE

-
  Gets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-
-

OUTPUTS

-
  value         - value of property
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pget_real(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    REAL,   INTENT(OUT) :: value          ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pinsert_char

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pinsert_char
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
SUBROUTINE h5pinsert_char(plist, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist      ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size      ! Size of property value
-    CHARACTER(LEN=*),   INTENT(IN) :: value  ! Property value
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-
- -
- -

h5pinsert_double

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pinsert_double
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_double(plist, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    DOUBLE PRECISION, INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pinsert_integer

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pinsert_integer
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_integer(plist, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    INTEGER,   INTENT(IN) :: value        ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pinsert_real

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pinsert_real
-
-

PURPOSE

-
  Registers a temporary property with a property list class.
-
-

INPUTS

-
  plist         - property list identifier
-                  permanent property within
-  name          - name of property to insert
-  size          - size of property in bytes
-  value         - initial value for the property
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pinsert_real(plist, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to insert
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    REAL,   INTENT(IN) :: value           ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pregister_char

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pregister_char
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_char(class, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class     ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size     ! size of the property value
-    CHARACTER(LEN=*),   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pregister_double

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pregister_double
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_double(class, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class     ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size     ! Size of the property value
-    DOUBLE PRECISION,   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pregister_integer

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pregister_integer
-
-

PURPOSE

-
  Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-  created property lists
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_integer(class, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class   ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! Size of the property value
-    INTEGER,   INTENT(IN) :: value        ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pregister_real

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pregister_real
-
- PURPOSE       Registers a permanent property with a property list class.
-
-

INPUTS

-
  class         - property list class to register
-                  permanent property within
-  name          - name of property to register
-  size          - size of property in bytes
-  value         - default value for property in newly
-                  created property lists
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 10, 2002
-
-

SOURCE

-
  SUBROUTINE h5pregister_real(class, name, size, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class   ! Property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to register
-    INTEGER(SIZE_T), INTENT(IN) :: size   ! size of the property value
-    REAL,   INTENT(IN) :: value           ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pset(get)fill_value_f

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pset(get)fill_value_f
-
-

PURPOSE

-
  Sets(gets) fill value for a dataset creation property list
-
-

INPUTS

-
  prp_id        - dataset creation property list identifier
-  type_id       - datatype identifier for fill value
-  fillvalue     - fill value
-
-

OUTPUTS

-
  type_id      - datatype identifier for fill value
-  fillvalue    - fill value
-  hdferr       - error code
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 14, 2001
-
-

NOTES

-
  h5pset(get)fill_value_f function is overloaded to support
-  INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes.
-
-

SOURCE

-
  SUBROUTINE h5pset_fill_value_integer(prp_id, type_id, fillvalue, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of
-                                          ! of fillvalue datatype
-                                          ! (in memory)
-    INTEGER, INTENT(IN) :: fillvalue      ! Fillvalue
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pset_char

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pset_char
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_char(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id    ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to modify
-    CHARACTER(LEN=*),   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pset_double

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pset_double
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_double(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id    ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name    ! Name of property to modify
-    DOUBLE PRECISION,   INTENT(IN) :: value ! Property value
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5pset_integer

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pset_integer
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_integer(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    INTEGER, INTENT(IN) :: value          ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5pset_real

- -

[ Top ] [ H5P (F90) ] [ Subroutines ]

-

NAME

-
  h5pset_real
-
-

PURPOSE

-
  Sets a property list value
-
-

INPUTS

-
  prp_id        - iproperty list identifier to modify
-  name          - name of property to modify
-  value         - value to set property to
-
-

OUTPUTS

-
  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002
-
-

SOURCE

-
  SUBROUTINE h5pset_real(prp_id, name, value, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    REAL, INTENT(IN) :: value             ! Property value
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Pff_f90.html b/fortran/doc/DevelGuide/src/H5Pff_f90.html deleted file mode 100644 index 0e9ff5c..0000000 --- a/fortran/doc/DevelGuide/src/H5Pff_f90.html +++ /dev/null @@ -1,4752 +0,0 @@ - - - - - - - -./src/H5Pff.f90 - - - - - -
-
- -

H5P (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  H5P_PROVISIONAL
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5P functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5P function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5pget_hyper_vector_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_hyper_vector_size_f 
-
-

PURPOSE

-
  Get the number of "I/O" vectors (vector size)
-
-

INPUTS

-
  plist_id     - dataset transfer property list identifier
-
-

OUTPUTS

-
  size         - vector size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_hyper_vector_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier 
-    INTEGER(SIZE_T), INTENT(OUT) :: size   ! Vector size
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_family_offset_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_family_offset_f 
-
-

PURPOSE

-
  Sets offset for family file driver.
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-  offset       - file offset
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  19 March 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_family_offset_f(prp_id, offset, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id   ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: offset ! Offset in bytes
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_family_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_fapl_family_f 
-
-

PURPOSE

-
  Sets the file access property list to use the family driver. 
-
-

INPUTS

-
  prp_id       - file access property list identifier
-  memb_size    - size in bytes of each file member 
-  memb_plist   - identifier of the file access property 
-                 list to be used for each family member
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_family_f(prp_id, memb_size, memb_plist , hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id      ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: memb_size ! Logical size, in bytes,
-                                              ! of each family member
-    INTEGER(HID_T), INTENT(IN) :: memb_plist  ! Identifier of the file 
-                                              ! access property list for 
-                                              ! each member of the family
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              ! 0 on success and -1 on failure
-
- -
- -

h5pset_meta_block_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_meta_block_size_f 
-
-

PURPOSE

-
  Sets the minimum size of metadata block allocations 
-
-

INPUTS

-
  plist_id     - file access property list identifier
-  size         - metatdata block size
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_meta_block_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! File access property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: size    ! Block size in bytes; 
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pall_filters_avail_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pall_filters_avail_f 
-
-

PURPOSE

-
  Checks if all filters set in the dataset creation
-  property list are available
-
-

INPUTS

-
  prp_id       - data creation property list identifier
-
-

OUTPUTS

-
  flag         - .TRUE. if all filters are available
-                 .FALSE. otherwise
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  April 10 2003
-
-

SOURCE

-
  SUBROUTINE h5pall_filters_avail_f(prp_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property 
-                                         !  list identifier 
-    LOGICAL, INTENT(OUT) :: flag         ! .TRUE. if all filters are available
-                                         ! .FALSE. otherwise
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pclose_class_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pclose_class_f 
-
-

PURPOSE

-
  Closes an existing property list class.
-
-

INPUTS

-
  class        - Property list class identifier
-
-

OUTPUTS

-
  hdferr       - error code         
-                  Success: 0 
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pclose_class_f(class, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code
-                                        ! 0 on success and -1 on failure
-
- -
- -

h5pclose_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pclose_f 
-
-

PURPOSE

-
  Terminates access to a property list. 
-
-

INPUTS

-
  prp_id - identifier of the property list to 
-           terminate access to. 
-
-

OUTPUTS

-
  hdferr - error code          
-           Success:  0
-           Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pclose_f(prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pcopy_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pcopy_f 
-
-

PURPOSE

-
  Copies an existing property list to create a new 
-  property list
-
-

INPUTS

-
  prp_id       - property list identifier
-
-

OUTPUTS

-
  new_prp_id   - new property list identifier
-  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001
-
-

SOURCE

-
  SUBROUTINE h5pcopy_f(prp_id, new_prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id      ! Property list identifier 
-    INTEGER(HID_T), INTENT(OUT) :: new_prp_id ! Identifier of property list
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              ! 0 on success and -1 on failure
-
- -
- -

h5pcopy_prop_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pcopy_prop_f 
-
-

PURPOSE

-
  Copies a property from one list or class to another.
-
-

INPUTS

-
  dst_id               - Identifier of the destination property list
-  src_id               - Identifier of the source property list 
-  name                 - name of the property to copy
-
-

OUTPUTS

-
  hdferr:              - error code
-                          Success: 0 
-                          Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pcopy_prop_f(dst_id, src_id, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dst_id  ! Destination property list 
-                                          ! identifier 
-    INTEGER(HID_T), INTENT(IN) :: src_id  ! Source property list identifier 
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Property name
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pcreate_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pcreate_f 
-
-

PURPOSE

-
       Creates a new property as an instance of a property 
-       list class.
-
-

INPUTS

-
  class  - type of the property class to be created.
-           Possible values are:
-             H5P_FILE_CREATE_F
-             H5P_FILE_ACCESS_F
-             H5P_DATASET_CREATE_F
-             H5P_DATASET_XFER_F
-             H5P_FILE_MOUNT_F
-
-

OUTPUTS

-
  prp_id - property list identifier
-  hdferr - error code          
-            Success:  0
-            Failure: -1 
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pcreate_f(class, prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class   ! The type of the property list 
-                                          ! to be created. Possible values are: 
-                                          !  H5P_FILE_CREATE_F
-                                          !  H5P_FILE_ACCESS_F
-                                          !  H5P_DATASET_CREATE_F
-                                          !  H5P_DATASET_XFER_F
-                                          !  H5P_FILE_MOUNT_F
-    INTEGER(HID_T), INTENT(OUT) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pequal_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pequal_f 
-
-

PURPOSE

-
  Checks if two property lists are eqaul
-
-

INPUTS

-
  plist1_id    - property list identifier
-  plist2_id    - property list identifier
-
-

OUTPUTS

-
  flag         - flag, possible values
-                   .TRUE. or .FALSE.
-  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1, flag is set to .FALSE.   
-
-

AUTHOR

-
  Elena Pourmal
-  September 30, 2002   
-
-

SOURCE

-
  SUBROUTINE h5pequal_f(plist1_id, plist2_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier 
-    INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier 
-    LOGICAL, INTENT(OUT)       :: flag      ! Flag
-    INTEGER, INTENT(OUT)       :: hdferr    ! Error code
-                                            !  0 on success and -1 on failure
-
- -
- -

h5pexist_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pexist_f 
-
-

PURPOSE

-
  Queries whether a property name exists in a property list or class. 
-
-

INPUTS

-
  prp_id       - property list identifier to query
-  name         - name of property to check for
-
-

OUTPUTS

-
  flag         - logical flag
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pexist_f(prp_id, name, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier 
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to modify
-    LOGICAL, INTENT(OUT) :: flag          ! .TRUE. if exists, .FALSE. otherwise
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5pfill_value_defined_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pfill_value_defined_f
-
-

PURPOSE

-
  Check if fill value is defined.
-
-

INPUTS

-
  plist_id     - dataset creation property list identifier
-
-

OUTPUTS

-
  flag         - fill value status flag
-                 Possible values are:
-                   H5D_FILL_VALUE_ERROR_F
-                   H5D_FILL_VALUE_UNDEFINED_F
-                   H5D_FILL_VALUE_DEFAULT_F
-                   H5D_FILL_VALUE_USER_DEFINED_F
-  hdferr       - error code            
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 4, 2002
-
-

SOURCE

-
  SUBROUTINE h5pfill_value_defined_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Dataset creation property list identifier
-    INTEGER, INTENT(OUT) :: flag            ! Fill value status flag
-                                            !  H5D_FILL_VALUE_ERROR_F
-                                            !  H5D_FILL_VALUE_UNDEFINED_F
-                                            !  H5D_FILL_VALUE_DEFAULT_F
-                                            !  H5D_FILL_VALUE_USER_DEFINED_F
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pget_alignment_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_alignment_f 
-
-

PURPOSE

-
  Retrieves the current settings for alignment 
-  properties from a file access property list. 
-
-

INPUTS

-
  prp_id       - file access property list identifier
-
-

OUTPUTS

-
  threshold    - threshold value       
-  alignment    - alignment value
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_alignment_f(prp_id, threshold,  alignment, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id       ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) :: threshold ! Threshold value
-    INTEGER(HSIZE_T), INTENT(OUT) :: alignment ! alignment value
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                             ! 0 on success and -1 on failure
-
- -
- -

h5pget_alloc_time_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_alloc_time_f
-
-

PURPOSE

-
  Get space allocation time for dataset during creation.
-
-

INPUTS

-
  plist_id     - dataset creation property list identifier
-
-

OUTPUTS

-
  flag         - allocation time flag:
-                   H5D_ALLOC_TIME_ERROR_F
-                   H5D_ALLOC_TIME_DEFAULT_F
-                   H5D_ALLOC_TIME_EARLY_F
-                   H5D_ALLOC_TIME_LATE_F
-                   H5D_ALLOC_TIME_INCR_F
-  hdferr:      - error code            
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 4, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_alloc_time_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Dataset creation property list identifier
-    INTEGER, INTENT(OUT) :: flag   ! Allocation time flag:
-                                   !  H5D_ALLOC_TIME_ERROR_F
-                                   !  H5D_ALLOC_TIME_DEFAULT_F
-                                   !  H5D_ALLOC_TIME_EARLY_F
-                                   !  H5D_ALLOC_TIME_LATE_F
-                                   !  H5D_ALLOC_TIME_INCR_F
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-                                   ! 0 on success and -1 on failure
-
- -
- -

H5Pget_attr_creation_order_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_attr_creation_order_f
-
-

PURPOSE

-
  Retrieves tracking and indexing settings for attribute creation order
-
-

INPUTS

-
  ocpl_id         - Object (group or dataset) creation property list identifier
-
-

OUTPUTS

-
  crt_order_flags - Flags specifying whether to track and index attribute creation order
-  hdferr          - Error code         
-                       Success:  0
-                       Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_attr_creation_order_f(ocpl_id, crt_order_flags, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocpl_id   ! Object (group or dataset) creation property list identifier 
-    INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order 
-    INTEGER, INTENT(OUT) :: hdferr   ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

H5Pget_attr_phase_change_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_attr_phase_change_f 
-
-

PURPOSE

-
  Retrieves attribute storage phase change thresholds 
-
-

INPUTS

-
  ocpl_id         - Object (dataset or group) creation property list identifier
-
-

OUTPUTS

-
  max_compact     - Maximum number of attributes to be stored in compact storage
-                    (Default: 8)
-  min_dense       - Minimum number of attributes to be stored in dense storage
-                    (Default: 6)
-  hdferr          - Error code         
-                     Success:  0
-                     Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier
-    INTEGER, INTENT(OUT) :: max_compact   ! Maximum number of attributes to be stored in compact storage
-                                          ! (Default: 8)
-    INTEGER, INTENT(OUT) :: min_dense     ! Minimum number of attributes to be stored in dense storage
-                                          ! (Default: 6)
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pget_btree_ratios_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_btree_ratios_f
-
-

PURPOSE

-
  Gets B-tree split ratios for a dataset transfer property list
-
-

INPUTS

-
  prp_id       - the dataset transfer property list 
-                 identifier 
-
-

OUTPUTS

-
  left         - the B-tree split ratio for left-most nodes 
-  middle       - the B-tree split ratio for all other nodes
-  right        - the B-tree split ratio for right-most nodes
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_btree_ratios_f(prp_id, left, middle, right, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    REAL, INTENT(OUT) :: left   ! The B-tree split ratio for left-most nodes.
-    REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes 
-    REAL, INTENT(OUT) :: right  ! The B-tree split ratio for right-most 
-                                !  nodes and lone nodes.
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5pget_buffer_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_buffer_f 
-
-

PURPOSE

-
  Gets size for conversion buffer
-
-

INPUTS

-
  plist_id     - data transfer property list identifier
-
-

OUTPUTS

-
  size         - buffer size 
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 2, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_buffer_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) :: size  ! Buffer size in bytes; 
-                                           !  buffer is allocated and freed by 
-                                           !  the library.
-    INTEGER, INTENT(OUT)       :: hdferr   ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pget_cache_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_cache_f 
-
-

PURPOSE

-
  Queries the meta data cache and raw data chunk cache 
-  parameters.  
-
-

INPUTS

-
  prp_id       - file access property list identifier
-
-

OUTPUTS

-
  mdc_nelmts   - number of elements (objects) in the meta 
-                 data cache 
-  rdcc_nelmts  - number of elements (objects) in the raw 
-                 data chunk cache 
-  rdcc_nbytes  - total size of the raw data chunk cache, in bytes 
-  rdcc_w0      - preemption policy (0 or 1)
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-  Bug fix: type of the rdcc_nelmts parameter should be INTEGER
-  instead of INTEGER(SIZE_T) October 10, 2003 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_cache_f(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: mdc_nelmts   ! Number of elements (objects)
-                                         !  in the meta data cache
-    INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts  ! Number of elements (objects)
-                                                 !  in the meta data cache
-    INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes  ! Total size of the raw data 
-                                                 !  chunk cache, in bytes 
-    REAL, INTENT(OUT) :: rdcc_w0                 ! Preemption policy
-    INTEGER, INTENT(OUT) :: hdferr               ! Error code
-                                                 ! 0 on success and -1 on failure
-
- -
- -

H5Pget_char_encoding_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_char_encoding_f
-
-

PURPOSE

-
  Retrieves the character encoding used to create a string
-
-

INPUTS

-
  plist_id - Property list identifier
-
-

OUTPUTS

-
  encoding - Valid values for encoding are:
-               H5T_CSET_ASCII_F -> US ASCII
-               H5T_CSET_UTF8_F -> UTF-8 Unicode encoding
-  hdferr   - Error code                
-               Success:  0
-               Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

SOURCE

-
  SUBROUTINE  h5pget_char_encoding_f(plist_id, encoding, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier
-
-    INTEGER, INTENT(OUT) :: encoding       ! Valid values for encoding are:
-                                           !  H5T_CSET_ASCII_F -> US ASCII
-                                           !  H5T_CSET_UTF8_F  -> UTF-8 Unicode encoding
-    INTEGER, INTENT(OUT) :: hdferr   ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

H5Pget_chunk_cache_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_chunk_cache_f
-
-

PURPOSE

-
  Retrieves the maximum possible number of elements in the meta
-  data cache and the maximum possible number of elements and
-  bytes and the RDCC_W0 value in the raw data chunk cache.  Any
-  (or all) arguments may be null pointers in which case the
-  corresponding datum is not returned.  If these properties have
-  not been set on this property list, the default values for a
-  file access property list are returned.
-
-

INPUTS

-
  dapl_id            - Dataset access property list identifier.
-
-

OUTPUTS

-
  rdcc_nslots        - Number of chunk slots in the raw data chunk cache hash table. 
-  rdcc_nbytes        - Total size of the raw data chunk cache, in bytes. 
-  rdcc_w0            - Preemption policy. 
-  hdferr             - Error code              
-                        Success:  0
-                        Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 13, 2009
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pget_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dapl_id       ! Dataset access property list identifier.
-    INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots ! Number of chunk slots in the raw data chunk cache hash table.
-    INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. 
-    REAL, INTENT(OUT) :: rdcc_w0                ! Preemption policy.
-    INTEGER, INTENT(OUT) :: hdferr              ! Error code:
-                                                ! 0 on success and -1 on failure
-
- -
- -

h5pget_chunk_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_chunk_f 
-
-

PURPOSE

-
  Retrieves the size of chunks for the raw data of a 
-  chunked layout dataset
-
-

INPUTS

-
  prp_id       - property list identifier
-  ndims        - size of dims array
-
-

OUTPUTS

-
  dims         - array with dimension sizes for each chunk
-  hdferr       - error code            
-                  Success:  number of chunk dimensions
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_chunk_f(prp_id, ndims, dims, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: ndims         ! Number of chunk dimensions to
-                                         ! to return
-    INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims    
-                                         ! Array containing sizes of
-                                         ! chunk dimensions
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         !  number of chunk dimensions on success,
-                                         !  -1 on failure
-
- -
- -

h5pget_class_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_class_f 
-
-

PURPOSE

-
  Returns the property list class for a property list.
-
-

INPUTS

-
  prp_id       - property list identifier
-
-

OUTPUTS

-
  classtype    - property list class
-                 Possible values are:
-                  H5P_ROOT_F
-                  H5P_FILE_CREATE_F
-                  H5P_FILE_ACCESS_F
-                  H5PE_DATASET_CREATE_F
-                  H5P_DATASET_XFER_F
-                  H5P_FILE_MOUNT_F
-  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1 
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_class_f(prp_id, classtype, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: classtype    ! The type of the property list 
-                                         ! to be created. Possible values are: 
-                                         !  H5P_ROOT_F
-                                         !  H5P_FILE_CREATE_F
-                                         !  H5P_FILE_ACCESS_F
-                                         !  H5PE_DATASET_CREATE_F 
-                                         !  H5P_DATASET_XFER_F
-                                         !  H5P_FILE_MOUNT_F
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_class_name_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_class_name_f 
-
-

PURPOSE

-
  Queries the name of a class.
-
-

INPUTS

-
  prp_id       - property list identifier to query
-
-

OUTPUTS

-
  name         - name of a class
-  size         - Actual length of the class name
-                   NOTE: If provided buffer "name" is smaller,
-                   than name will be truncated to fit into
-                   provided user buffer
-  hdferr:      - error code
-                  Success: 0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

HISTORY

-
 Returned the size of name as an argument      
-
-

SOURCE

-
  SUBROUTINE h5pget_class_name_f(prp_id, name, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier 
-    CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer to retireve class name
-    INTEGER, INTENT(OUT) :: size          ! Actual length of the class name
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pget_class_parent_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_class_parent_f 
-
-

PURPOSE

-
  Retrieves the parent class of a genric property class. 
-
-

INPUTS

-
  prp_id       - property list identifier to query
-
-

OUTPUTS

-
  parent_id    - identifier of the parent class
-  hdferr:      - error code          
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_class_parent_f(prp_id, parent_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id     ! Property list identifier 
-    INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list 
-                                             ! identifier 
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5pget_copy_object_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_copy_object_f 
-
-

PURPOSE

-
  Retrieves the properties to be used when an object is copied.
-
-

INPUTS

-
  ocp_plist_id - Object copy property list identifier
-
-

OUTPUTS

-
  copy_options - Copy option(s) to be get
-  hdferr       - Error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pget_copy_object_f(ocp_plist_id, copy_options, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier
-    INTEGER, INTENT(OUT) :: copy_options       ! Valid copy options returned are:
-                                               !   H5O_COPY_SHALLOW_HIERARCHY_F
-                                               !   H5O_COPY_EXPAND_SOFT_LINK_F 
-                                               !   H5O_COPY_EXPAND_EXT_LINK_F
-                                               !   H5O_COPY_EXPAND_REFERENCE_F
-                                               !   H5O_COPY_WITHOUT_ATTR_FLAG_F
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

H5Pget_create_inter_group_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_create_inter_group_f
-
-

PURPOSE

-
  Determines whether property is set to enable creating missing intermediate groups.
-
-

INPUTS

-
  lcpl_id            - Link creation property list identifier
-  crt_intermed_group - Specifying whether to create intermediate groups upon 
-                       the creation of an object
-
-

OUTPUTS

-
  hdferr             - Error code              
-                        Success:  0
-                        Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 4, 2008
-
-

HISTORY

-
 The long subroutine name (>31) on older f90 compilers causes problems
-          so the name was shortened
-
-

SOURCE

-
  SUBROUTINE h5pget_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: lcpl_id      ! Link creation property list identifier
-    INTEGER, INTENT(IN) :: crt_intermed_group  ! Flag specifying whether to create intermediate groups
-                                               ! upon creation of an object
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

h5pget_data_transform_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_data_transform_f 
-
-

PURPOSE

-
  Retrieves a data transform expression.
-
-

INPUTS

-
  plist_id   - Identifier of the property list or class
-
-

OUTPUTS

-
  expression - buffer to hold transform expression
-  hdferr     - Error code
-                 Success:  Actual lenght of the expression
-                           If provided buffer "expression" is 
-                           smaller, than expression will be 
-                           truncated to fit into
-                           provided user buffer
-                 Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 19, 2008
-
-

HISTORY

-
 Should hdferr return just 0 or 1 and add another arguement for the size?
-
-

SOURCE

-
SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id         ! Identifier of the property list or class
-    CHARACTER(LEN=*), INTENT(OUT) :: expression    ! Buffer to hold transform expression
-    INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: size ! Registered size of the transform expression
-    INTEGER, INTENT(OUT) :: hdferr                 ! Error code
-                                                   !  0 on success and -1 on failure
-
- -
- -

h5pget_driver_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_driver_f 
-
-

PURPOSE

-
  Returns low-lever driver identifier. 
-
-

INPUTS

-
  prp_id  - file access or data transfer property 
-            list identifier. 
-
-

OUTPUTS

-
  driver  - low-level driver identifier
-  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_driver_f(prp_id, driver, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier 
-    INTEGER(HID_T), INTENT(OUT) :: driver ! Low-level file driver identifier
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pget_edc_check_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_edc_check_f 
-
-

PURPOSE

-
  Queries error detecting  
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  March 13, 2003
-
-

SOURCE

-
  SUBROUTINE h5pget_edc_check_f(prp_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier 
-    INTEGER, INTENT(OUT) :: flag         ! Checksum filter flag
-                                         ! May have one of the following values:
-                                         !  H5Z_ERROR_EDC_F
-                                         !  H5Z_DISABLE_EDC_F
-                                         !  H5Z_ENABLE_EDC_F
-                                         !  H5Z_NO_EDC_F
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

H5Pget_est_link_info_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_est_link_info_f 
-
-

PURPOSE

-
  Queries data required to estimate required local heap or object header size.
-
-

INPUTS

-
  gcpl_id         - Group creation property list identifier
-
-

OUTPUTS

-
  est_num_entries - Estimated number of links to be inserted into group
-  est_name_len    - Estimated average length of link names
-  hdferr          - Error code
-                     Success:  0
-                     Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pget_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id   ! Group creation property list identifier  
-    INTEGER, INTENT(OUT) :: est_num_entries ! Estimated number of links to be inserted into group
-    INTEGER, INTENT(OUT) :: est_name_len    ! Estimated average length of link names
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pget_external_count_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_external_count_f 
-
-

PURPOSE

-
  Returns the number of external files for a dataset. 
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-
-

OUTPUTS

-
  count        - number of external files for the 
-                 specified dataset
-  hdferr       - error code            
-                   Success:  0
-                   Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_external_count_f (prp_id, count, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: count        ! Number of external files for the 
-                                         ! Specified dataset
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_external_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_external_f 
-
-

PURPOSE

-
  Returns information about an external file. 
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-
-

OUTPUTS

-
  idx          - external file index 
-  name_size    - maximum size of name array
-  name         - name of the external file     
-  name         - name of external file
-  offset       - offset in bytes from the beginning of the 
-                 file to the location in the file
-                 where the data starts
-  bytes        - size of the external file data
-  hdferr       - error code            
-                  Success:  0
-                   Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_external_f(prp_id, idx, name_size, name, offset,bytes, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    INTEGER, INTENT(IN) :: idx           ! External file index.
-    INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array 
-    CHARACTER(LEN=*), INTENT(OUT) :: name    ! Name of an external file
-    INTEGER, INTENT(OUT) :: offset           ! Offset, in bytes, from the beginning 
-                                             !  of the file to the location in the file 
-                                             !  where the data starts.
-    INTEGER(HSIZE_T), INTENT(OUT) :: bytes   ! Number of bytes reserved in the 
-                                             !  file for the data
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-                                             ! 0 on success and -1 on failure
-
- -
- -

h5pget_fapl_core_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_fapl_core_f 
-
-

PURPOSE

-
  Queries core file driver properties. 
-
-

INPUTS

-
  prp_id        - file access property list identifier
-
-

OUTPUTS

-
  increment     - size, in bytes, of memory increments 
-  backing_store - boolean flag indicating whether to write 
-                  the file contents to disk when the file is closed. 
-  hdferr        - error code           
-                   Success:  0
-                   Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_core_f(prp_id, increment, backing_store, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id      ! Property list identifier 
-    INTEGER(SIZE_T), INTENT(OUT) :: increment ! File block size in bytes.
-    LOGICAL, INTENT(OUT) :: backing_store   ! Flag to indicate that
-                                            ! entire file contents are flushed to a file 
-                                            ! with the same name as this core file.
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pget_fapl_direct_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_fapl_direct_f
-
-

PURPOSE

-
  Gets up use of the direct I/O driver.
-
-

INPUTS

-
  fapl_id      - File access property list identifier
-
-

OUTPUTS

-
  alignment    - Required memory alignment boundary
-  block_size   - File system block size
-  cbuf_size    - Copy buffer size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr)
-    IMPLICIT NONE  
-    INTEGER(HID_T), INTENT(IN) :: fapl_id       ! File access property list identifier
-    INTEGER(SIZE_T), INTENT(OUT) :: alignment   ! Required memory alignment boundary!
-    INTEGER(SIZE_T), INTENT(OUT) :: block_size  ! File system block size
-    INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size   ! Copy buffer size
-    INTEGER, INTENT(OUT) :: hdferr              ! Error code
-                                                ! 0 on success and -1 on failure
-
- -
- -

h5pget_fapl_family_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_fapl_family_f 
-
-

PURPOSE

-
  Returns file access property list information.       
-
-

INPUTS

-
  prp_id       - file access property list identifier
-
-

OUTPUTS

-
  memb_size    - size in bytes of each file member 
-  memb_plist   - identifier of the file access property 
-                 list to be used for each family member
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_family_f(prp_id, memb_size, memb_plist , hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id       ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) :: memb_size ! Logical size, in bytes,
-                                               ! of each family member
-    INTEGER(HID_T), INTENT(OUT) :: memb_plist  ! Identifier of the file 
-                                               ! access property list for 
-                                               ! each member of the family
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

h5pget_fapl_multi_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_fapl_multi_f 
-
-

PURPOSE

-
  Sets up use of the multi-file driver. 
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-
-

OUTPUTS

-
  mem_map      - mapping array
-  memb_fapl    - property list for each memory usage type
-  memb_name    - names of member file
-  relax        - flag 
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

OPTIONAL PARAMETERS

-
  maxlen_out   - maximum length for memb_name array element 
-
-

AUTHOR

-
  Elena Pourmal
-  24 March 2003
-
-

SOURCE

-
  SUBROUTINE h5pget_fapl_multi_f(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr, maxlen_out)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier 
-    INTEGER, DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(OUT) :: memb_map
-    INTEGER(HID_T), DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(OUT) :: memb_fapl
-    CHARACTER(LEN=*), DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(OUT) :: memb_name
-    !INTEGER(HADDR_T), DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(OUT) :: memb_addr
-    REAL, DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(OUT) :: memb_addr
-    INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out 
-    LOGICAL, INTENT(OUT) :: relax
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_fclose_degree_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_fclose_degree_f 
-
-

PURPOSE

-
  Returns the degree for the file close behavior.
-
-

INPUTS

-
  fapl_id      - File access property list identifier
-
-

OUTPUTS

-
  degree       - Possible values are:
-                  H5F_CLOSE_DEFAULT_F
-                  H5F_CLOSE_WEAK_F
-                  H5F_CLOSE_SEMI_F
-                  H5F_CLOSE_STRONG_F
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  September 26, 2002   
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pget_fclose_degree_f(fapl_id, degree, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier 
-    INTEGER, INTENT(OUT) :: degree        ! Possible values are: 
-                                          !  H5F_CLOSE_DEFAULT_F
-                                          !  H5F_CLOSE_WEAK_F
-                                          !  H5F_CLOSE_SEMI_F
-                                          !  H5F_CLOSE_STRONG_F
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pget_fill_time_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_fill_time_f
-
-

PURPOSE

-
  Get fill value writing time for dataset
-
-

INPUTS

-
  plist_id     - dataset creation property list identifier
-
-

OUTPUTS

-
  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1
-
-

OPTIONAL PARAMETERS

-
  flag         - fill time flag:
-                  H5D_FILL_TIME_ERROR_F
-                  H5D_FILL_TIME_ALLOC_F
-                  H5D_FILL_TIME_NEVER_F
-
-

AUTHOR

-
  Elena Pourmal
-  October 4, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_fill_time_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Dataset creation property list identifier
-    INTEGER, INTENT(OUT) :: flag   ! Fill time flag:
-                                   !  H5D_FILL_TIME_ERROR_F
-                                   !  H5D_FILL_TIME_ALLOC_F
-                                   !  H5D_FILL_TIME_NEVER_F
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-                                   ! 0 on success and -1 on failure
-
- -
- -

h5pget_filter_by_id_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_filter_by_id_f 
-
-

PURPOSE

-
  Returns information about a filter in a pipeline
-
-

INPUTS

-
  prp_id       - data creation or transfer property list 
-                 identifier
-
-

OUTPUTS

-
  filter_id    - filter identifier
-  flags        - bit vector specifying certain general
-                 properties of the filter
-  cd_nelmts    - number of elements in cd_values
-  cd_values    - auxiliary data for the filter
-  namelen      - number of characters in the name buffer
-  name         - buffer to retrieve filter name
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  April 10 2003
-
-

SOURCE

-
  SUBROUTINE h5pget_filter_by_id_f(prp_id, filter_id, flags, cd_nelmts, cd_values, namelen, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id   ! Property list identifier 
-    INTEGER, INTENT(IN) :: filter_id       ! Filter identifier
-    INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts     ! Number of elements in cd_values.
-    INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter.
-    INTEGER, INTENT(OUT) :: flags          ! Bit vector specifying certain general
-                                           ! properties of the filter.
-    INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name.
-    CHARACTER(LEN=*), INTENT(OUT) :: name  ! Name of the filter
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pget_filter_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_filter_f 
-
-

PURPOSE

-
  Returns information about a filter in a pipeline
-
-

INPUTS

-
  prp_id        - data creation or transfer property list 
-                  identifier
-  filter_number - sequence number within the filter
-                  pipeline of the filter for which 
-                  information is sought
-
-

OUTPUTS

-
  filter_id    - filter identification number
-  flags        - bit vector specifying certain general
-                 properties of the filter
-  cd_nelmts    - number of elements in cd_values
-  cd_values    - auxiliary data for the filter
-  namelen      - number of characters in the name buffer
-  name         - buffer to retrieve filter name
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_filter_f(prp_id, filter_number, flags, cd_nelmts, cd_values, namelen, name, filter_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: filter_number ! Sequence number within the filter
-                                         !  pipeline of the filter for which 
-                                         !  information is sought
-    INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values  ! Auxiliary data for the filter.
-    INTEGER, INTENT(OUT) :: flags        ! Bit vector specifying certain general
-                                         !  properties of the filter.
-    INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts  ! Number of elements in cd_values.
-    INTEGER(SIZE_T), INTENT(IN) :: namelen       ! Anticipated number of characters in name.
-    CHARACTER(LEN=*), INTENT(OUT) :: name        ! Name of the filter
-    INTEGER, INTENT(OUT) :: filter_id            ! Filter identification number  
-    INTEGER, INTENT(OUT) :: hdferr               ! Error code
-                                                 ! 0 on success and -1 on failure
-
- -
- -

h5pget_gc_references_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_gc_references_f 
-
-

PURPOSE

-
  Returns garbage collecting references setting.       
-
-

INPUTS

-
  prp_id       - file access property list identifier
-
-

OUTPUTS

-
  gc_reference - flag for stting garbage collection on 
-                 and off (1 or 0)
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_gc_references_f(prp_id, gc_reference, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: gc_reference ! The flag for garbage collecting
-                                         !  references for the file
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_istore_k_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_istore_k_f 
-
-

PURPOSE

-
  Queries the 1/2 rank of an indexed storage B-tree. 
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-
-

OUTPUTS

-
  ik           - 1/2 rank of chunked storage B-tree
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_istore_k_f(prp_id, ik, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: ik           ! 1/2 rank of chunked storage B-tree
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_layout_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_layout_f 
-
-

PURPOSE

-
  Returns the layout of the raw data for a dataset. 
-
-

INPUTS

-
  prp_id       - data creation property list identifier
-
-

OUTPUTS

-
  layout       - type of storage layout for raw data
-                 possible values are:
-                  H5D_COMPACT_F
-                  H5D_CONTIGUOUS_F
-                  H5D_CHUNKED_F
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_layout_f (prp_id, layout, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: layout       ! Type of storage layout for raw data
-                                         ! possible values are:
-                                         !  H5D_COMPACT_F(0)
-                                         !  H5D_CONTIGUOUS_F(1)
-                                         !  H5D_CHUNKED_F(2)
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

H5Pget_link_creation_order_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_link_creation_order_f
-
-

PURPOSE

-
  Queries whether link creation order is tracked and/or indexed in a group.
-
-

INPUTS

-
  gcpl_id - Group creation property list identifier
-
-

OUTPUTS

-
  crt_order_flags - Creation order flag(s)
-  hdferr          - Error code         
-                     Success:  0
-                     Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_link_creation_order_f(gcpl_id, crt_order_flags, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id   ! Group creation property list identifier
-    INTEGER, INTENT(OUT) :: crt_order_flags ! Creation order flag(s)
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

H5Pget_link_phase_change_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_link_phase_change_f
-
-

PURPOSE

-
  Queries the settings for conversion between compact and dense groups.
-
-

INPUTS

-
  gcpl_id      - Group creation property list identifier
-
-

OUTPUTS

-
  max_compact  - Maximum number of attributes to be stored in compact storage
-  min_dense    - Minimum number of attributes to be stored in dense storage
-  hdferr       - Error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 20, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier
-    INTEGER, INTENT(OUT) :: max_compact   ! Maximum number of attributes to be stored in compact storage
-    INTEGER, INTENT(OUT) :: min_dense     ! Minimum number of attributes to be stored in dense storage
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

H5Pget_local_heap_size_hint_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_local_heap_size_hint_f 
-
-

PURPOSE

-
  Queries the local heap size hint for original-style groups.
-
-

INPUTS

-
  gcpl_id   - Group creation property list identifier
-
-

OUTPUTS

-
  size_hint - Hint for size of local heap
-  hdferr    - Error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_local_heap_size_hint_f(gcpl_id, size_hint, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id     ! Group creation property list identifier
-    INTEGER(SIZE_T), INTENT(OUT) :: size_hint ! Hint for size of local heap
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              ! 0 on success and -1 on failure
-
- -
- -

h5pget_meta_block_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_meta_block_size_f 
-
-

PURPOSE

-
  Gets the minimum size of metadata block allocations 
-
-

INPUTS

-
  plist_id     - file access property list identifier
-
-

OUTPUTS

-
  size         - metatdata block size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_meta_block_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! File access property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) :: size   ! Block size in bytes; 
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pget_nfilters_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_nfilters_f 
-
-

PURPOSE

-
  Returns the number of filters in the pipeline. 
-
-

INPUTS

-
  prp_id       - data creation or transfer property list 
-                 identifier
-
-

OUTPUTS

-
  nfilters     - number of filters in the pipeline
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pget_nfilters_f (prp_id, nfilters, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: nfilters     ! The number of filters in the pipeline
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_nlinks_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_nlinks_f 
-
-

PURPOSE

-
  Gets maximum number of soft or user-defined link traversals.
-
-

INPUTS

-
  lapl_id - File access property list identifier
-  nlinks  - Maximum number of links to traverse
-
-

OUTPUTS

-
  hdferr  - error code
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 24, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_nlinks_f(lapl_id, nlinks, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: lapl_id  ! File access property list identifier
-    INTEGER(SIZE_T), INTENT(OUT) :: nlinks ! Maximum number of links to traverse
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pget_npros_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_npros_f 
-
-

PURPOSE

-
  Queries number of properties in property list or class
-
-

INPUTS

-
  prp_id       - iproperty list identifier to query
-
-

OUTPUTS

-
  nprops       - number of properties in property object
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_nprops_f(prp_id, nprops, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id    ! Property list identifier 
-    INTEGER(SIZE_T), INTENT(OUT) :: nprops  ! Number of properties
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

H5Pget_obj_track_times_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pget_obj_track_times_f 
-
-

PURPOSE

-
  Returns whether times are tracked for an object.
-
-

INPUTS

-
  plist_id     - property list id
-  flag         - object timestamp setting
-                 .TRUE.,.FALSE.
-
-

OUTPUTS

-
  hdferr       - error code            
-                 Success:  0
-                 Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 22, 2008
-
-

SOURCE

-
  SUBROUTINE h5pget_obj_track_times_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property 
-                                           ! list identifier 
-    LOGICAL, INTENT(OUT) :: flag   ! Object timestamp setting
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-                                   ! 0 on success and -1 on failure
-
- -
- -

h5pget_preserve_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_preserve_f 
-
-

PURPOSE

-
  Checks status of the dataset transfer property list.
-
-

INPUTS

-
  prp_id  - property list identifier
-
-

OUTPUTS

-
  flag    - status flag
-  hdferr  - error code         
-       Success:  0
-       Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001
- 
-  Datatype of the flag parameter is changed from 
-  INTEGER to LOGICAL 
-  June 4, 2003 
-
-

SOURCE

-
  SUBROUTINE h5pget_preserve_f(prp_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    LOGICAL, INTENT(OUT) ::  flag        ! TRUE/FALSE flag. Shows status of the dataset's
-                                         ! transfer property for partial writing/reading
-                                         ! compound datatype
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_sec2_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_sec2_f 
-
-

PURPOSE

-
  NOT AVAILABLE
-
-

INPUTS

-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
- SOURCE!          SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) 
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-            INTEGER, INTENT(OUT) :: sec2   ! value indicates whether the file
-            INTEGER, INTENT(OUT) :: hdferr  ! Error code
- 0 on success and -1 on failure
-
- -
- -

h5pget_sieve_buf_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_sieve_buf_size_f 
-
-

PURPOSE

-
  Gets the maximum size of the data sieve buffer
-
-

INPUTS

-
  plist_id     - file access property list identifier
-
-

OUTPUTS

-
  size         - sieve buffer size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_sieve_buf_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier 
-    INTEGER(SIZE_T), INTENT(OUT) :: size   ! Buffer size in bytes 
-    INTEGER, INTENT(OUT)       :: hdferr   ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pget_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_size_f 
-
-

PURPOSE

-
  Queries the size of a property value in bytes.
-
-

INPUTS

-
  prp_id       - property list identifier to query
-  name         - name of property to query
-
-

OUTPUTS

-
  size         - size of property in bytes
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pget_size_f(prp_id, name, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier 
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of property to query
-    INTEGER(SIZE_T), INTENT(OUT) :: size  ! Size in bytes
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pget_sizes_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_sizes_f 
-
-

PURPOSE

-
  Retrieves the size of the offsets and lengths used 
-  in an HDF5 file
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-
-

OUTPUTS

-
  sizeof_addr  - size of an object offset in bytes 
-  sizeof_size  - size of an object length in bytes
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_sizes_f(prp_id, sizeof_addr, sizeof_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id        ! Property list identifier 
-    INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr ! Size of an object
-                                                ! offset in bytes 
-    INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size ! Size of an object
-                                                ! length in bytes 
-    INTEGER, INTENT(OUT) :: hdferr              ! Error code
-                                                ! 0 on success and -1 on failure
-
- -
- -

h5pget_small_data_block_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_small_data_block_size_f 
-
-

PURPOSE

-
  Gets the minimum size of "small" raw data block
-
-

INPUTS

-
  plist_id     - file access property list identifier
-
-

OUTPUTS

-
  size         - small raw data block size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pget_small_data_block_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! File access property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) :: size   ! Small raw data block size
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pget_split_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pget_split_f 
-
-

PURPOSE

-
  NOT AVAILABLE
-
-

INPUTS

-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
!          SUBROUTINE h5pget_split_f(prp_id, meta_ext_size, meta_ext, meta_plist,raw_ext_size,&
-!                                     raw_ext, raw_plist, hdferr)
-!            IMPLICIT NONE
-!            INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-!            INTEGER(SIZE_T), INTENT(IN) :: meta_ext_size ! Number of characters of the meta
-                                                         ! file extension to be copied to the
-                                                         ! meta_ext buffer
-
-!            CHARACTER(LEN=*), INTENT(OUT) :: meta_ext  !Name of the extension for
-                                                      !the metafile filename
-!            INTEGER(HID_T), INTENT(OUT) :: meta_plist  ! Identifier of the meta file
-                                                      ! access property list
-!            INTEGER(SIZE_T), INTENT(IN) :: raw_ext_size ! Number of characters of the raw
-                                                         ! file extension to be copied to the
-                                                         ! raw_ext buffer
-!            CHARACTER(LEN=*), INTENT(OUT) :: raw_ext  !Name extension for the raw file filename
-!            INTEGER(HID_T), INTENT(OUT) :: raw_plist  !Identifier of the raw file
-                                                     !access property list
-!            INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

h5pget_stdio_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_stdio_f 
-
-

PURPOSE

-
  NOT AVAILABLE
-
-

INPUTS

-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
!          SUBROUTINE h5pget_stdio_f (prp_id, io, hdferr)
-!
-!            IMPLICIT NONE
-!            INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-!            INTEGER, INTENT(OUT) :: io   ! value indicates that the file
-                                         !access property list is set to
-                                         !the stdio driver
-!            INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

h5pget_sym_k_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_sym_k_f 
-
-

PURPOSE

-
  Retrieves the size of the symbol table B-tree 1/2 rank
-  and the symbol table leaf node 1/2 size. 
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-
-

OUTPUTS

-
  ik           - symbol table tree 1/2 rank
-  lk           - symbol table node 1/2 size
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_sym_k_f(prp_id, ik, lk, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: ik           ! Symbol table tree rank
-    INTEGER, INTENT(OUT) :: lk           ! Symbol table node size
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pget_userblock_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_userblock_f 
-
-

PURPOSE

-
  Gets user block size.
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-
-

OUTPUTS

-
  block_size   - size of the user block in bytes
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_userblock_f(prp_id, block_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id         ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(OUT) ::  block_size ! Size of the 
-                                                 ! user-block in bytes 
-    INTEGER, INTENT(OUT) :: hdferr               ! Error code
-                                                 ! 0 on success and -1 on failure
-
- -
- -

h5pget_version_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pget_version_f 
-
-

PURPOSE

-
  Retrieves the version information of various objects 
-  for a file creation property list
-
-

INPUTS

-
  prp_id       - file createion property list identifier
-
-

OUTPUTS

-
  boot         - super block version number
-  freelist     - global freelist version number
-  stab         - symbol table version number
-  shhdr        - shared object header version number
-  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pget_version_f(prp_id, boot, freelist, &
-       stab, shhdr, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id        ! Property list identifier 
-    INTEGER, DIMENSION(:), INTENT(OUT) :: boot  ! Array to put boot
-                                                ! block version number
-    INTEGER, DIMENSION(:), INTENT(OUT) :: freelist  ! Array to put global
-                                                    ! Freelist version number
-
-    INTEGER, DIMENSION(:), INTENT(OUT) :: stab  ! Array to put symbol
-                                                ! table version number
-    INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr ! Array to put shared
-                                                ! object header version number
-    INTEGER, INTENT(OUT) :: hdferr              ! Error code
-                                                ! 0 on success and -1 on failure
-
- -
- -

h5pisa_class_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pisa_class_f 
-
-

PURPOSE

-
  Determines whether a property list is a member of a class. 
-
-

INPUTS

-
  plist        - property list identifier 
-  pclass       - identifier of the property class
-
-

OUTPUTS

-
  flag         - .TRUE. if a member, .FALSE. otherwise
-  hdferr:      - error code           
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pisa_class_f(plist, pclass, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist     ! Property list identifier 
-    INTEGER(HID_T), INTENT(IN) :: pclass    ! Class identifier
-    LOGICAL, INTENT(OUT) :: flag            ! logical flag
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5pmodify_filter_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pmodify_filter_f 
-
-

PURPOSE

-
  Adds a filter to the filter pipeline. 
-
-

INPUTS

-
  prp_id       - data creation or transfer property list 
-                 identifier
-  filter       - filter to be modified
-  flags        - bit vector specifying certain general
-                 properties of the filter
-  cd_nelmts    - number of elements in cd_values
-  cd_values    - auxiliary data for the filter
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  April 10 2003
-
-

SOURCE

-
  SUBROUTINE h5pmodify_filter_f(prp_id, filter, flags, cd_nelmts, cd_values,  hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: filter        ! Filter to be modified
-    INTEGER, INTENT(IN) :: flags         ! Bit vector specifying certain general
-                                         !  properties of the filter
-    INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts       ! Number of elements in cd_values
-    INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5premove_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5premove_f 
-
-

PURPOSE

-
  Removes a property from a property list. 
-
-

INPUTS

-
  plid         - Property list identofoer
-  name         - name of the property to remove
-
-

OUTPUTS

-
  hdferr:      - error code
-                  Success: 0 
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5premove_f(plid, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plid   ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to remove
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         !  0 on success and -1 on failure
-
- -
- -

h5premove_filter_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5premove_filter_f 
-
-

PURPOSE

-
  Delete one or more filters from the filter pipeline. 
-
-

INPUTS

-
  prp_id       - data creation or transfer property list 
-                 identifier
-  filter       - filter to be removed
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Quincey Koziol
-  January 27 2004
-
-

SOURCE

-
  SUBROUTINE h5premove_filter_f(prp_id, filter, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property list
-                                         ! identifier
-    INTEGER, INTENT(IN) :: filter        ! Filter to be removed
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_alignment_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_alignment_f 
-
-

PURPOSE

-
  Sets alignment properties of a file access property list. 
-
-

INPUTS

-
  prp_id       - file access property list identifier
-  threshold    - threshold value       
-  alignment    - alignment value
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_alignment_f(prp_id, threshold,  alignment, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id      ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: threshold ! Threshold value
-    INTEGER(HSIZE_T), INTENT(IN) :: alignment ! alignment value
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              ! 0 on success and -1 on failure
-
- -
- -

h5pset_alloc_time_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_alloc_time_f
-
-

PURPOSE

-
  Set space allocation time for dataset during creation.
-
-

INPUTS

-
  plist_id     - dataset creation property list identifier
-  flag         - allocation time flag:
-                   H5D_ALLOC_TIME_ERROR_F
-                   H5D_ALLOC_TIME_DEFAULT_F
-                   H5D_ALLOC_TIME_EARLY_F
-                   H5D_ALLOC_TIME_LATE_F
-                   H5D_ALLOC_TIME_INCR_F
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 4, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_alloc_time_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Dataset creation property list identifier
-    INTEGER, INTENT(IN) :: flag             ! Allocation time flag:
-                                            !  H5D_ALLOC_TIME_ERROR_F
-                                            !  H5D_ALLOC_TIME_DEFAULT_F
-                                            !  H5D_ALLOC_TIME_EARLY_F
-                                            !  H5D_ALLOC_TIME_LATE_F
-                                            !  H5D_ALLOC_TIME_INCR_F
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

H5Pset_attr_creation_order_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_attr_creation_order_f 
-
-

PURPOSE

-
  Sets tracking and indexing of attribute creation order
-
-

INPUTS

-
  ocpl_id         - Object creation property list identifier
-  crt_order_flags - Flags specifying whether to track and index attribute creation order
-
-

OUTPUTS

-
  hdferr          - Error code         
-                     Success:  0
-                     Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_attr_creation_order_f(ocpl_id, crt_order_flags , hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocpl_id   ! Object (dataset or group) creation property list identifier
-    INTEGER, INTENT(IN) :: crt_order_flags  ! Flags specifying whether to track and index attribute creation order
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

H5Pset_attr_phase_change_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_attr_phase_change_f 
-
-

PURPOSE

-
  Sets attribute storage phase change thresholds.
-
-

INPUTS

-
  ocpl_id - Object (dataset or group) creation property list identifier
-
-

OUTPUTS

-
  max_compact     - Maximum number of attributes to be stored in compact storage
-                    (Default: 8)
-  min_dense       - Minimum number of attributes to be stored in dense storage
-                    (Default: 6)
-  hdferr          - Error code         
-                     Success:  0
-                     Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier
-    INTEGER, INTENT(IN) :: max_compact    ! Maximum number of attributes to be stored in compact storage
-                                          !(Default: 8)
-    INTEGER, INTENT(IN) :: min_dense      ! Minimum number of attributes to be stored in dense storage
-                                          ! (Default: 6)
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pset_btree_ratios_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_btree_ratios_f 
-
-

PURPOSE

-
  Sets B-tree split ratios for a dataset transfer 
-  property list. 
-
-

INPUTS

-
  prp_id       - the dataset transfer property list 
-                 identifier 
-  left         - the B-tree split ratio for left-most nodes 
-  middle       - the B-tree split ratio for all other nodes
-  right        - the B-tree split ratio for right-most nodes
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pset_btree_ratios_f(prp_id, left, middle, right, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier
-    REAL, INTENT(IN) :: left   ! The B-tree split ratio for left-most nodes.
-    REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes 
-    REAL, INTENT(IN) :: right  ! The B-tree split ratio for right-most 
-                               !  nodes and lone nodes. 
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5pset_buffer_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_buffer_f 
-
-

PURPOSE

-
  Sets sixe for conversion buffer
-
-

INPUTS

-
  plist_id     - data transfer property list identifier
-  size         - buffer size 
-
-

OUTPUTS

-
  hdferr:      - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 2, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_buffer_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: size   ! Buffer size in bytes; 
-                                           ! buffer is allocated and freed by 
-                                           ! the library.
-    INTEGER, INTENT(OUT)       :: hdferr   ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_cache_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_cache_f 
-
-

PURPOSE

-
  Sets the meta data cache and raw data chunk 
-  cache parameters
-
-

INPUTS

-
  prp_id       - file access property list identifier
-  mdc_nelmts   - number of elements (objects) in the meta 
-                 data cache 
-  rdcc_nelmts  - number of elements (objects) in the raw 
-                 data chunk cache 
-  rdcc_nbytes  - total size of the raw data chunk cache, in bytes 
-  rdcc_w0      - preemption policy (0 or 1)
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_cache_f(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: mdc_nelmts    ! Number of elements (objects)
-                                         !  in the meta data cache
-    INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts ! Number of elements (objects)
-                                               !  in the meta data cache
-    INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data 
-                                               !  chunk cache, in bytes 
-    REAL, INTENT(IN) :: rdcc_w0                ! Preemption policy
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               !  0 on success and -1 on failure
-
- -
- -

H5Pset_char_encoding_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_char_encoding_f
-
-

PURPOSE

-
  Sets the character encoding used to encode a string.
-
-

INPUTS

-
  plist_id - Property list identifier
-  encoding - Valid values for encoding are:
-               H5T_CSET_ASCII_F -> US ASCII
-               H5T_CSET_UTF8_F -> UTF-8 Unicode encoding
-
-

OUTPUTS

-
  hdferr   - Error code                
-               Success:  0
-               Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_char_encoding_f(plist_id, encoding, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier
-    INTEGER, INTENT(IN) :: encoding        ! String encoding character set:
-                                           !   H5T_CSET_ASCII_F -> US ASCII
-                                           !   H5T_CSET_UTF8_F  -> UTF-8 Unicode encoding
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

H5Pset_chunk_cache_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_chunk_cache_f
-
-

PURPOSE

-
  Set the number of objects in the meta data cache and the
-  maximum number of chunks and bytes in the raw data chunk cache.
-  Once set, these values will override the values in the file access
-  property list.  Each of these values can be individually unset
-  (or not set at all) by passing the macros:
-    H5D_CHUNK_CACHE_NSLOTS_DFLT_F,
-    H5D_CHUNK_CACHE_NBYTES_DFLT_F, and/or
-    H5D_CHUNK_CACHE_W0_DFLT_F
-    as appropriate.
-
-  The RDCC_W0 value should be between 0 and 1 inclusive and
-  indicates how much chunks that have been fully read or fully
-  written are favored for preemption.  A value of zero means
-  fully read or written chunks are treated no differently than
-  other chunks (the preemption is strictly LRU) while a value
-  of one means fully read chunks are always preempted before
-  other chunks.
-
-

INPUTS

-
  dapl_id          - Dataset access property list identifier.
-  rdcc_nslots      - The number of chunk slots in the raw data chunk cache for this dataset.
-  rdcc_nbytes      - The total size of the raw data chunk cache for this dataset.
-  rdcc_w0          - The chunk preemption policy for this dataset.
-
-

OUTPUTS

-
  hdferr           - Error code                
-                       Success:  0
-                       Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 13, 2009
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pset_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dapl_id      ! Dataset access property list identifier.
-    INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data 
-                                               ! chunk cache for this dataset.
-    INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache 
-                                               ! for this dataset.
-    REAL, INTENT(IN) :: rdcc_w0                ! The chunk preemption policy for this dataset.
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

h5pset_chunk_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_chunk_f 
-
-

PURPOSE

-
  Sets the size of the chunks used to store 
-  a chunked layout dataset. 
-
-

INPUTS

-
  prp_id  - datatset creation property list identifier
-  ndims   - number of dimensions for each chunk
-  dims    - array with dimension sizes for each chunk
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
   Explicit Fortran interfaces were added for 
-   called C functions (it is needed for Windows
-   port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_chunk_f(prp_id, ndims, dims, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: ndims         ! Number of chunk dimensions
-    INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims    
-                                         ! Array containing sizes of
-                                         ! chunk dimensions
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_copy_object_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_copy_object_f 
-
-

PURPOSE

-
  Sets properties to be used when an object is copied.
-
-

INPUTS

-
  ocp_plist_id - Object copy property list identifier
-  copy_options - Copy option(s) to be set
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 3, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pset_copy_object_f(ocp_plist_id, copy_options, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier
-    INTEGER, INTENT(IN) :: copy_options ! Copy option(s) to be set, valid options are:
-                                        !   H5O_COPY_SHALLOW_HIERARCHY_F
-                                        !   H5O_COPY_EXPAND_SOFT_LINK_F
-                                        !   H5O_COPY_EXPAND_EXT_LINK_F
-                                        !   H5O_COPY_EXPAND_REFERENCE_F
-                                        !   H5O_COPY_WITHOUT_ATTR_FLAG_F
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code
-                                        ! 0 on success and -1 on failure
-
- -
- -

H5Pset_create_inter_group_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_create_inter_group_f
-
-

PURPOSE

-
  Specifies in property list whether to create missing intermediate groups.
-
-

INPUTS

-
  lcpl_id            - Link creation property list identifier
-  crt_intermed_group - crt_intermed_group specifying whether 
-                       to create intermediate groups upon the creation 
-                       of an object
-
-

OUTPUTS

-
  hdferr             - Error code              
-                         Success:  0
-                         Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 22, 2008
-
-

HISTORY

-
 The long subroutine name (>31) on older f90 compilers causes problems
-          so had to shorten the name
-
-

SOURCE

-
  SUBROUTINE h5pset_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: lcpl_id      ! Link creation property list identifier
-    INTEGER, INTENT(IN) :: crt_intermed_group  ! specifying whether to create intermediate groups
-                                               ! upon the creation of an object
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-                                   ! 0 on success and -1 on failure
-
- -
- -

h5pset_data_transform_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_data_transform_f 
-
-

PURPOSE

-
  Sets a data transform expression.
-
-

INPUTS

-
  plist_id   - Identifier of the property list or class 
-  expression - Buffer to hold transform expression
-
-

OUTPUTS

-
  hdferr     - error code
-                 Success:  0
-                 Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 19, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_data_transform_f(plist_id, expression, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id     ! Identifier of the property list or class
-    CHARACTER(LEN=*), INTENT(IN) :: expression ! Buffer to hold transform expression
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

h5pset_deflate_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_deflate_f 
-
-

PURPOSE

-
   Sets compression method and compression level. 
-
-

INPUTS

-
   prp_id  - property list identifier
-   level   - compression level
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
       Elena Pourmal
-               August 12, 1999
-
-

HISTORY

-
       Explicit Fortran interfaces were added for 
-                       called C functions (it is needed for Windows
-                       port).  March 14, 2001
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_deflate_f(prp_id, level, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: level         ! Compression level 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_edc_check_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_edc_check_f 
-
-

PURPOSE

-
  Enables/disables error detecting  
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-  flag         - EDC flag; possible values:
-                   H5Z_DISABLE_EDC_F
-                   H5Z_ENABLE_EDC_F
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  March 13, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_edc_check_f(prp_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: flag          ! Checksum filter flag
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_est_link_info_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_est_link_info_f 
-
-

PURPOSE

-
  Sets estimated number of links and length of link names in a group.
-
-

INPUTS

-
 gcpl_id         - Group creation property list identifier  
- est_num_entries - Estimated number of links to be inserted into group
- est_name_len    - Estimated average length of link names
-
-

OUTPUTS

-
  hdferr         - Error code
-                    Success:  0
-                    Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id  ! Group creation property list identifier  
-    INTEGER, INTENT(IN) :: est_num_entries ! Estimated number of links to be inserted into group
-    INTEGER, INTENT(IN) :: est_name_len    ! Estimated average length of link names
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_external_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_external_f 
-
-

PURPOSE

-
  Adds an external file to the list of external files. 
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-  name         - name of external file
-  offset       - offset in bytes from the beginning of the 
-                 file to the location in the file
-                 where the data starts
-  bytes        - size of the external file data. 
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pset_external_f(prp_id, name, offset,bytes, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id  ! Property list identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name  ! Name of an external file
-    INTEGER, INTENT(IN) :: offset         ! Offset, in bytes, from the beginning 
-                                          !  of the file to the location in the file 
-                                          !  where the data starts.
-    INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the 
-                                          !  file for the data
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_core_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_fapl_core_f 
-
-

PURPOSE

-
  Modifies the file access property list to use the 
-  H5FD_CORE driver. 
-
-

INPUTS

-
  prp_id           - file access property list identifier
-  increment        - size, in bytes, of memory increments 
-  backing_store    - boolean flag indicating whether to write 
-                     the file contents to disk when the file is closed. 
-
-

OUTPUTS

-
  hdferr           - error code                
-                       Success:  0
-                       Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_core_f(prp_id, increment, backing_store, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id     ! Property list identifier 
-    INTEGER(SIZE_T), INTENT(IN) :: increment ! File block size in bytes.
-    LOGICAL, INTENT(IN) :: backing_store ! Flag to indicate that
-                                         ! entire file contents are flushed to a file 
-                                         ! with the same name as this core file.
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_direct_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_direct_f
-
-

PURPOSE

-
  Sets up use of the direct I/O driver.
-
-

INPUTS

-
  fapl_id      - File access property list identifier
-  alignment    - Required memory alignment boundary
-  block_size   - File system block size
-  cbuf_size    - Copy buffer size
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr)
-    IMPLICIT NONE  
-    INTEGER(HID_T), INTENT(IN) :: fapl_id     ! File access property list identifier
-    INTEGER(SIZE_T), INTENT(IN) :: alignment  ! Required memory alignment boundary!
-    INTEGER(SIZE_T), INTENT(IN) :: block_size ! File system block size
-    INTEGER(SIZE_T), INTENT(IN) :: cbuf_size  ! Copy buffer size
-    INTEGER, INTENT(OUT) :: hdferr            ! Error code
-                                              ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_multi_l

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_multi_l 
-
-

PURPOSE

-
  Sets up use of the multi-file driver. 
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-  mem_map      - mapping array
-  memb_fapl    - property list for each memory usage type
-  memb_name    - names of member file
-  relax        - flag 
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  20 March 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_multi_l(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier 
-    INTEGER, DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(IN) :: memb_map ! Mapping array
-    INTEGER(HID_T), DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(IN) :: memb_fapl ! Property list for each memory usage type
-    CHARACTER(LEN=*), DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(IN) :: memb_name ! Names of member file
-    REAL, DIMENSION(0:H5FD_MEM_NTYPES_F-1), INTENT(IN) :: memb_addr 
-    LOGICAL, INTENT(IN) :: relax     ! Flag
-    INTEGER, INTENT(OUT) :: hdferr   ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_multi_s

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_multi_s 
-
-

PURPOSE

-
  Sets up use of the multi-file driver. 
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-  relax        - flag 
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  31 March 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_multi_s(prp_id, relax, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier 
-    LOGICAL, INTENT(IN) :: relax
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_sec2_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_sec2_f 
-
-

PURPOSE

-
  Sets the sec2 driver. 
-
-

INPUTS

-
  prp_id  - file access property list identifier
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_sec2_f (prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_split_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_fapl_split_f 
-
-

PURPOSE

-
  Emulates the old split file driver. 
-
-

INPUTS

-
  prp_id       - file access property list identifier
-  meta_ext     - name of the extension for the metafile 
-                 filename
-  meta_plist   - identifier of the meta file access property 
-                 list
-  raw_ext      - name extension for the raw file filename
-  raw_plist    - identifier of the raw file access property list
-
-

OUTPUTS

-
  hdferr       - error code            
-                   Success:  0
-                   Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_split_f(prp_id, meta_ext, meta_plist, raw_ext, raw_plist, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id     ! Property list identifier 
-    CHARACTER(LEN=*), INTENT(IN) :: meta_ext ! Name of the extension for
-                                             !  the metafile filename
-    INTEGER(HID_T), INTENT(IN) :: meta_plist ! Identifier of the meta file
-                                             !  access property list
-    CHARACTER(LEN=*), INTENT(IN) :: raw_ext  ! Name extension for the raw file filename
-    INTEGER(HID_T), INTENT(IN) :: raw_plist  ! Identifier of the raw file 
-                                             !  access property list
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-                                             ! 0 on success and -1 on failure
-
- -
- -

h5pset_fapl_stdio_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fapl_stdio_f 
-
-

PURPOSE

-
  Sets the standard I/O driver. 
-
-

INPUTS

-
  prp_id  - file access property list identifier
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_fapl_stdio_f (prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_fclose_degree_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fclose_degree_f 
-
-

PURPOSE

-
  Sets the degree for the file close behavior.
-
-

INPUTS

-
  fapl_id      - file access property list identifier
-  degree       - Possible values are:
-                   H5F_CLOSE_DEFAULT_F
-                   H5F_CLOSE_WEAK_F
-                   H5F_CLOSE_SEMI_F
-                   H5F_CLOSE_STRONG_F
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  September 26, 2002   
-
-

SOURCE

-
  SUBROUTINE h5pset_fclose_degree_f(fapl_id, degree, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier 
-    INTEGER, INTENT(IN) :: degree         ! Possible values are: 
-                                          !  H5F_CLOSE_DEFAULT_F
-                                          !  H5F_CLOSE_WEAK_F
-                                          !  H5F_CLOSE_SEMI_F
-                                          !  H5F_CLOSE_STRONG_F
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

h5pset_fill_time_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fill_time_f
-
-

PURPOSE

-
  Set fill value writing time for dataset
-
-

INPUTS

-
  plist_id     - dataset creation property list identifier
-  flag         - fill time flag:
-                   H5D_FILL_TIME_ERROR_F
-                   H5D_FILL_TIME_ALLOC_F
-                   H5D_FILL_TIME_NEVER_F
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 4, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_fill_time_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id  ! Dataset creation property list identifier
-    INTEGER, INTENT(IN) :: flag             ! Fill time flag:
-                                            !  H5D_FILL_TIME_ERROR_F
-                                            !  H5D_FILL_TIME_ALLOC_F
-                                            !  H5D_FILL_TIME_NEVER_F
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-                                            ! 0 on success and -1 on failure
-
- -
- -

h5pset_filter_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_filter_f 
-
-

PURPOSE

-
  Adds a filter to the filter pipeline. 
-
-

INPUTS

-
  prp_id       - data creation or transfer property list 
-                 identifier
-  filter       - filter to be added to the pipeline 
-  flags        - bit vector specifying certain general
-                 properties of the filter
-  cd_nelmts    - number of elements in cd_values
-  cd_values    - auxiliary data for the filter
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  February, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_filter_f(prp_id, filter, flags, cd_nelmts, cd_values,  hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: filter        ! Filter to be added to the pipeline.
-    INTEGER, INTENT(IN) :: flags         ! Bit vector specifying certain general
-                                       !  properties of the filter.
-    INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts       ! Number of elements in cd_values.
-    INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter.
-    INTEGER, INTENT(OUT) :: hdferr                 ! Error code
-                                                 ! 0 on success and -1 on failure
-
- -
- -

h5pset_fletcher32_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_fletcher32_f 
-
-

PURPOSE

-
  Sets Fletcher32 checksum of EDC for a dataset creation 
-  property list.
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  March 13, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_fletcher32_f(prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_gc_references_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_gc_references_f 
-
-

PURPOSE

-
  Sets garbage collecting references flag. 
-
-

INPUTS

-
  prp_id       - file access property list identifier
-  gc_reference - flag for stting garbage collection on 
-                 and off (1 or 0)
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_gc_references_f (prp_id, gc_reference, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: gc_reference  ! The flag for garbage collecting
-                                         !  references for the file
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_hyper_vector_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_hyper_vector_size_f 
-
-

PURPOSE

-
  Set the number of "I/O" vectors (vector size)
-
-

INPUTS

-
  plist_id     - dataset transfer property list identifier
-  size         - vector size
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_hyper_vector_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier 
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Vector size
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_istore_k_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_istore_k_f 
-
-

PURPOSE

-
  Sets the size of the parameter used to control the 
-  B-trees for indexing chunked datasets
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-  ik           - 1/2 rank of chunked storage B-tree
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_istore_k_f (prp_id, ik, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: ik            ! 1/2 rank of chunked storage B-tree
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_layout_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_layout_f 
-
-

PURPOSE

-
  Sets the type of storage used store the raw data 
-  for a dataset. 
-
-

INPUTS

-
  prp_id       - data creation property list identifier
-  layout       - type of storage layout for raw data
-                 possible values are:
-                   H5D_COMPACT_F
-                   H5D_CONTIGUOUS_F
-                   H5D_CHUNKED_F
-
-

OUTPUTS

-
  hdferr      - error code             
-                 Success:  0
-                 Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pset_layout_f (prp_id, layout, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: layout        ! Type of storage layout for raw data
-                                         ! possible values are:
-                                         !   H5D_COMPACT_F
-                                         !   H5D_CONTIGUOUS_F
-                                         !   H5D_CHUNKED_F
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

H5Pset_libver_bounds_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
             H5Pset_libver_bounds_f
-
-

PURPOSE

-
    Sets bounds on library versions, and indirectly format versions, to be used when creating objects.
-
-

INPUTS

-
  fapl_id - File access property list identifier
-  low     - The earliest version of the library that will be used for writing objects.
-  high    - The latest version of the library that will be used for writing objects.
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 18, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_libver_bounds_f(fapl_id, low, high, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier
-    INTEGER, INTENT(IN) :: low   ! The earliest version of the library that will be used for writing objects.
-                                 ! Currently, low must be one of two pre-defined values:
-                                 !            HDF_LIBVER_EARLIEST_F
-                                 !            HDF_LIBVER_LATEST_F
-    INTEGER, INTENT(IN) :: high  ! The latest version of the library that will be used for writing objects.
-                                 ! Currently, low must set to the pre-defined value:
-                                 !            HDF_LIBVER_LATEST_F
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-                                    ! 0 on success and -1 on failure
-
- -
- -

H5Pset_link_creation_order_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_link_creation_order_f 
-
-

PURPOSE

-
    Sets creation order tracking and indexing for links in a group.
-
-

INPUTS

-
  gcpl_id         - Group creation property list identifier
-  crt_order_flags - Creation order flag(s)
-
-

OUTPUTS

-
  hdferr           - Error code                
-                       Success:  0
-                       Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 18, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_link_creation_order_f(gcpl_id, crt_order_flags, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id  ! File access property list identifier
-    INTEGER, INTENT(IN) :: crt_order_flags ! Creation order flag(s)
-    INTEGER, INTENT(OUT) :: hdferr   ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

h5pset_link_phase_change_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_link_phase_change_f
-
-

PURPOSE

-
  Sets the parameters for conversion between compact and dense groups.
-
-

INPUTS

-
  gcpl_id         - Group creation property list identifier  
-  max_compact     - Maximum number of attributes to be stored in compact storage
-  min_dense       - Minimum number of attributes to be stored in dense storage
-
-

OUTPUTS

-
  hdferr          - error code         
-                     Success:  0
-                     Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier
-    INTEGER, INTENT(IN) :: max_compact    ! Maximum number of attributes to be stored in compact storage
-    INTEGER, INTENT(IN) :: min_dense      ! Minimum number of attributes to be stored in dense storage
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-                                          ! 0 on success and -1 on failure
-
- -
- -

H5Pset_local_heap_size_hint_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_local_heap_size_hint_f 
-
-

PURPOSE

-
  Sets the local heap size hint for original-style groups.
-
-

INPUTS

-
  gcpl_id   - Group creation property list identifier
-  size_hint - Hint for size of local heap
-
-

OUTPUTS

-
  hdferr    - Error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_local_heap_size_hint_f(gcpl_id, size_hint, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: gcpl_id    ! Group creation property list identifier
-    INTEGER(SIZE_T), INTENT(IN) :: size_hint ! Hint for size of local heap
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-                                             ! 0 on success and -1 on failure
-
- -
- -

H5Pset_nbit_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_nbit_f 
-
-

PURPOSE

-
  Sets up the use of the N-Bit filter.
-
-

INPUTS

-
  plist_id - Dataset creation property list identifier.
-
-

OUTPUTS

-
  hdferr   - Error code
-              Success:  0
-              Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pset_nbit_f(plist_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_nlinks_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_nlinks_f 
-
-

PURPOSE

-
  Sets maximum number of soft or user-defined link traversals.
-
-

INPUTS

-
  lapl_id - File access property list identifier
-   nlinks - Maximum number of links to traverse
-
-

OUTPUTS

-
  hdferr  - Error code
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 24, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pset_nlinks_f(lapl_id, nlinks, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier
-    INTEGER(SIZE_T), INTENT(IN) :: nlinks ! Maximum number of links to traverse
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code   
-                                          ! 0 on success and -1 on failure
-
- -
- -

H5Pset_obj_track_times_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_obj_track_times_f 
-
-

PURPOSE

-
  Set whether the birth, access, modification & change times for
-  an object are stored.
-
-  Birth time is the time the object was created.  Access time is
-  the last time that metadata or raw data was read from this
-  object.  Modification time is the last time the data for
-  this object was changed (either writing raw data to a dataset
-  or inserting/modifying/deleting a link in a group).  Change
-  time is the last time the metadata for this object was written
-  (adding/modifying/deleting an attribute on an object, extending
-  the size of a dataset, etc).
-
-   If these times are not tracked, they will be reported as
-   12:00 AM UDT, Jan. 1, 1970 (i.e. 0 seconds past the UNIX
-   epoch) when queried.
-
-

INPUTS

-
  plist_id     - property list id
-  flag         - object timestamp setting
-                 .TRUE.,.FALSE.
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 22, 2008
-       
-
-

SOURCE

-
  SUBROUTINE h5pset_obj_track_times_f(plist_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property
-                                           ! list identifier
-    LOGICAL, INTENT(IN) :: flag    ! Object timestamp setting
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-                                   ! 0 on success and -1 on failure
-
- -
- -

h5pset_preserve_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
   h5pset_preserve_f 
-
-

PURPOSE

-
  Sets the dataset transfer property list status to 
-  TRUE or FALSE for initializing compound datatype
-  members during write/read operations.
-
-

INPUTS

-
  prp_id       - property list identifier
-  flag         - status flag
-
-

OUTPUTS

-
  hdferr       - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-                       
-  Datatype of the flag parameter is changed from 
-  INTEGER to LOGICAL June 4, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_preserve_f(prp_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    LOGICAL, INTENT(IN) ::  flag         ! TRUE/FALSE flag to set the dataset
-                                         ! transfer property for partila writing/reading
-                                         ! compound datatype
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_scaleoffset_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_scaleoffset_f 
-
-

PURPOSE

-
  Sets up the use of the Scale-Offset filter.
-
-

INPUTS

-
  plist_id     - Dataset creation property list identifier.
-  scale_type   - Flag indicating compression method.
-  scale_factor - Parameter related to scale.
-
-

OUTPUTS

-
  hdferr        - Error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 21, 2008
-
-

HISTORY

-

SOURCE

-
  SUBROUTINE h5pset_scaleoffset_f(plist_id, scale_type, scale_factor, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier
-    INTEGER, INTENT(IN) :: scale_type      ! Flag indicating compression method.
-    INTEGER, INTENT(IN) :: scale_factor    ! Parameter related to scale.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

H5Pset_shared_mesg_index_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_shared_mesg_index_f
-
-

PURPOSE

-
  Configures the specified shared object header message index
-
-

INPUTS

-
  fcpl_id         - File creation property list identifier.
-  index_num       - Index being configured.
-  mesg_type_flags - Types of messages that should be stored in this index.
-  min_mesg_size   - Minimum message size.
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_shared_mesg_index_f(fcpl_id, index_num, mesg_type_flags, min_mesg_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: fcpl_id  ! file creation property list
-    INTEGER, INTENT(IN) :: index_num       ! Index being configured.
-    INTEGER, INTENT(IN) :: mesg_type_flags ! Types of messages that should be stored in this index.
-    INTEGER, INTENT(IN) :: min_mesg_size   ! Minimum message size.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

H5Pset_shared_mesg_nindexes_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  H5Pset_shared_mesg_nindexes_f 
-
-

PURPOSE

-
  Sets number of shared object header message indexes 
-
-

INPUTS

-
  plist_id - file creation property list
-  nindexes - Number of shared object header message indexes to be available in files created with this property list
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  January, 2008
-
-

SOURCE

-
  SUBROUTINE h5pset_shared_mesg_nindexes_f( plist_id, nindexes, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list
-    INTEGER, INTENT(IN) :: nindexes  ! Number of shared object header message indexes 
-                                     !  available in files created WITH this property list
-    INTEGER, INTENT(OUT) :: hdferr   ! Error code
-                                     ! 0 on success and -1 on failure
-
- -
- -

h5pset_shuffle_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_shuffle_f 
-
-

PURPOSE

-
  Sets shuffling filter
-
-

INPUTS

-
  prp_id       - dataset creation property list identifier
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_shuffle_f(prp_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_sieve_buf_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_sieve_buf_size_f 
-
-

PURPOSE

-
  Sets the maximum size of the data sieve buffer
-
-

INPUTS

-
  plist_id     - file access property list identifier
-  size         - sieve buffer size
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_sieve_buf_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier 
-    INTEGER(SIZE_T), INTENT(IN) :: size    ! Buffer size in bytes; 
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_sizes_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_sizes_f 
-
-

PURPOSE

-
  Sets the byte size of the offsets and lengths used 
-  to address objects in an HDF5 file.
-
-

INPUTS

-
  prp_id       - file creation property list identifier
-  sizeof_addr  - size of an object offset in bytes 
-  sizeof_size  - size of an object length in bytes
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_sizes_f (prp_id, sizeof_addr, sizeof_size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id       ! Property list identifier 
-    INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object 
-                                               !  offset in bytes 
-    INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object 
-                                               !  length in bytes 
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-                                               ! 0 on success and -1 on failure
-
- -
- -

h5pset_small_data_block_size_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_small_data_block_size_f 
-
-

PURPOSE

-
  Sets the minimum size of "small" raw data block
-
-

INPUTS

-
  plist_id     - file access property list identifier
-  size         - small raw data block size
-
-

OUTPUTS

-
  hdferr       - error code            
-                  Success:  0
-                  Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002      
-
-

SOURCE

-
  SUBROUTINE h5pset_small_data_block_size_f(plist_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: size   ! Small raw data block size
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-                                           ! 0 on success and -1 on failure
-
- -
- -

h5pset_sym_k_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_sym_k_f 
-
-

PURPOSE

-
  Sets the size of parameters used to control the 
-
-

INPUTS

-
  prp_id  - file creation property list identifier
-  ik      - symbol table tree rank
-  lk      - symbol table node size
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-               
-
-

SOURCE

-
  SUBROUTINE h5pset_sym_k_f (prp_id, ik, lk, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER, INTENT(IN) :: ik            ! Symbol table tree rank 
-    INTEGER, INTENT(IN) :: lk            ! Symbol table node size 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_szip_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_szip_f 
-
-

PURPOSE

-
  Sets up use of szip compression
-
-

INPUTS

-
  prp_id           - dataset creation property list identifier
-  options_mask     - A bit-mask conveying the desired SZIP options.
-                     Current valid values in Fortran are:
-                        H5_SZIP_EC_OM_F
-                        H5_SZIP_NN_OM_F
-  pixels_per_block - szip parameters
-
-

OUTPUTS

-
  hdferr           - error code                
-                       Success:  0
-                       Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  April 10 2003
-
-

SOURCE

-
  SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) 
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property 
-                                         ! list identifier 
-    INTEGER, INTENT(IN) :: options_mask  ! A bit-mask conveying the desired
-                                         ! SZIP options
-                                         ! Current valid values in Fortran are:
-                                         !    H5_SZIP_EC_OM_F
-                                         !    H5_SZIP_NN_OM_F
-    INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements 
-                                            ! in each data block
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5pset_userblock_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5pset_userblock_f 
-
-

PURPOSE

-
   Sets user block size
-
-

INPUTS

-
   prp_id - file creation property list to modify
-   size   - size of the user-block in bytes
-
-

OUTPUTS

-
  hdferr  - error code         
-             Success:  0
-             Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999      
-
-

HISTORY

-
  Explicit Fortran interfaces were added for 
-  called C functions (it is needed for Windows
-  port).  March 14, 2001 
-
-

SOURCE

-
  SUBROUTINE h5pset_userblock_f (prp_id, size, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier 
-    INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes 
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5punregister_f

- -

[ Top ] [ Subroutines ]

-

NAME

-
  h5punregister_f 
-
-

PURPOSE

-
  Removes a property from a property list class. 
-
-

INPUTS

-
  class        - Property list class identifier
-  name         - name of the property to remove
-
-

OUTPUTS

-
  hdferr:      - error code
-                  Success: 0 
-                  Failure: -1   
-
-

AUTHOR

-
  Elena Pourmal
-  October 9, 2002      
-
-

SOURCE

-
  SUBROUTINE h5punregister_f(class, name, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: class  ! property list class identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! name of property to remove
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-                                         ! 0 on success and -1 on failure
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Rf_c.html b/fortran/doc/DevelGuide/src/H5Rf_c.html deleted file mode 100644 index bba197e..0000000 --- a/fortran/doc/DevelGuide/src/H5Rf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Rf.c - - - - - -
-
- -

H5Rf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5R Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Rff_F03_f90.html b/fortran/doc/DevelGuide/src/H5Rff_F03_f90.html deleted file mode 100644 index 3202540..0000000 --- a/fortran/doc/DevelGuide/src/H5Rff_F03_f90.html +++ /dev/null @@ -1,492 +0,0 @@ - - - - - - - -./src/H5Rff_F03.f90 - - - - - -
-
- -

H5R (F03)

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5R_PROVISIONAL
-
-

FILE

-
  fortran/src/H5Rff_F03.f90
-
-

PURPOSE

-
  This file contains Fortran 90 and Fortran 2003 interfaces for H5R functions.
-  It contains the same functions as H5Rff_DEPRECIATE.f90 but includes the
-  Fortran 2003 functions and the interface listings. This file will be compiled
-  instead of H5Rff_DEPRECIATE.f90 if Fortran 2003 functions are enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5R function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5rcreate_object_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rcreate_object_f
-
-

PURPOSE

-
  Creates reference to the object
-
-

INPUTS

-
  loc_id    - location identifier
-  name      - name of the object at the specified location
-
-

OUTPUTS

-
  ref       - reference to the specified object
-  hdferr:   - error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rcreate_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rcreate_object_f(loc_id, name, ref, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the object at location specified
-                                           ! by loc_id identifier
-    TYPE(hobj_ref_t_f), INTENT(INOUT), TARGET :: ref   ! Object reference
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5rcreate_ptr_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rcreate_ptr_f
-
-

PURPOSE

-
  Creates a reference.
-
-

INPUTS

-
  loc_id     - location identifier
-  name       - name of the dataset at the specified location
-  ref_type   - type of reference:
-                H5R_OBJECT
-                H5T_STD_REF_DSETREG
-
-

OUTPUTS

-
  ref        - reference created by the function call.
-  hdferr     - error code
-                  Success:  0
-                  Failure: -1
- OPTIONAL
-  space_id   - dataspace identifier that describes selected region
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  June 20, 2008
-
-

NOTES

-
  This is a module procedure for the h5rcreate_f
-  subroutine where the output is a pointer.
-
-

SOURCE

-
  SUBROUTINE h5rcreate_ptr_f(loc_id, name, ref_type, ref, hdferr, space_id)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id     ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name     ! Name of the dataset at location specified
-                                             ! by loc_id identifier
-    INTEGER, INTENT(IN) :: ref_type          ! type of reference
-    TYPE(C_PTR), INTENT(INOUT) :: ref        ! Reference created by the function call
-    INTEGER, INTENT(OUT) :: hdferr           ! Error code
-    INTEGER(HID_T), INTENT(IN), OPTIONAL :: space_id ! Dataset's dataspace identifier
-
- -
- -

h5rcreate_region_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rcreate_region_f
-
-

PURPOSE

-
  Creates reference to the dataset region
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the dataset at the specified location
-  space_id      - dataspace identifier that describes selected region
-
-

OUTPUTS

-
  ref           - reference to the dataset region
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rcreate_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rcreate_region_f(loc_id, name, space_id, ref, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the dataset at location specified
-                                           ! by loc_id identifier
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Dataset's dataspace identifier
-    TYPE(hdset_reg_ref_t_f), INTENT(INOUT), TARGET :: ref ! Dataset region reference
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5rdereference_object_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rdereference_object_f
-
-

PURPOSE

-
  Opens the HDF5 object referenced
-
-

INPUTS

-
  dset_id  - identifier of the dataset containing
-             reference
-  ref      - reference to open
-
-

OUTPUTS

-
  obj_id   - object_identifier
-  hdferr:  - error code
-              Success:  0
-              Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rdereference_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rdereference_object_f(obj_id, ref, ref_obj_id, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id          ! Dataset identifier
-    TYPE(hobj_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference
-    INTEGER(HID_T), INTENT(OUT) :: ref_obj_id     ! Object identifier
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5rdereference_ptr_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rdereference_ptr_f
-
-

PURPOSE

-
  Opens the HDF5 object referenced.
-
-

INPUTS

-
  obj_id     - valid identifier for the file containing the
-               referenced object or any object in that file.
-  ref_type   - the reference type of ref.
-  ref        - Reference to open.
-
-

OUTPUTS

-
  ref_obj_id - identifier of referenced object
-  hdferr     - error code
-                Success:  0
-                Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  June 20, 2008
-
-

NOTES

-
  This is a module procedure for the h5rdereference_f
-  subroutine using pointers.
-
-

SOURCE

-
  SUBROUTINE h5rdereference_ptr_f(obj_id, ref_type, ref, ref_obj_id, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id  ! Valid identifier for the file containing the
-                                          !  referenced object or any object in that file.
-    INTEGER, INTENT(IN) :: ref_type       ! The reference type of ref.
-    TYPE(C_PTR), INTENT(IN) :: ref        ! Object reference
-    INTEGER(HID_T), INTENT(OUT) :: ref_obj_id
-                                          ! Identifier of referenced object
-    INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5rdereference_region_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rdereference_region_f
-
-

PURPOSE

-
  Opens the dataset region
-
-

INPUTS

-
  dset_id       - identifier of the dataset containing
-                  reference to teh regions
-  ref           - reference to open
-
-

OUTPUTS

-
  obj_id        - dataspace identifier
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rdereference_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rdereference_region_f(obj_id, ref, ref_obj_id, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id   ! Dataset identifier
-    TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref   ! Object reference
-    INTEGER(HID_T), INTENT(OUT) :: ref_obj_id  ! Dataspace identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5rget_name_object_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rget_name_object_f
-
-

PURPOSE

-
  Retrieves a name of a referenced object.
-
-

INPUTS

-
  loc_id    - Identifier for the dataset containing the reference or for the group that dataset is in.
-  ref       - An object or dataset region reference.
-
-

OUTPUTS

-
  name      - A name associated with the referenced object or dataset region.
-
-  hdferr:   - error code
-               Success:  0
-               Failure: -1
-
-

OPTIONAL PARAMETERS

-
  size     - The size of the name buffer.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 28, 2008
-
- SOURCES
- or for the group that dataset is in.
- returning 0 (zero) if no name is associated
- with the identifier
-
- -
- -

h5rget_name_ptr_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rget_name_ptr_f
-
-

PURPOSE

-
  Retrieves a name of a referenced object.
-
-

INPUTS

-
  loc_id   - Identifier for the dataset containing the reference or
-             for the group that dataset is in.
-  ref_type - Type of reference.
-  ref      - An object or dataset region reference.
-
-

OUTPUTS

-
  name     - A name associated with the referenced object or dataset ptr.
-
-  hdferr   - error code
-               Success:  0
-               Failure: -1
-
-

OPTIONAL PARAMETERS

-
   size   - The size of the name buffer.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 28, 2008
-
-

SOURCE

-
  SUBROUTINE h5rget_name_ptr_f(loc_id, ref_type, ref, name, hdferr, size)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for the dataset containing the reference
-                                           !  or for the group that dataset is in.
-    INTEGER, INTENT(IN) :: ref_type ! Type of reference.
-    TYPE(C_PTR), INTENT(IN) :: ref  ! An object or dataset region reference.
-    CHARACTER(LEN=*), INTENT(OUT) :: name  ! A name associated with the referenced object or dataset ptr.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-    INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size   ! The size of the name buffer,
-                                                     ! returning 0 (zero) if no name is associated
-                                                     ! with the identifier
-
- -
- -

h5rget_name_region_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rget_name_region_f
-
-

PURPOSE

-
  Retrieves a name of a dataset region.
-
-

INPUTS

-
  loc_id  - Identifier for the dataset containing the reference or
-            for the group that dataset is in.
-  ref     - An object or dataset region reference.
-
-

OUTPUTS

-
  name    - A name associated with the referenced object or dataset region.
-  hdferr  - error code
-              Success:  0
-              Failure: -1
-
-

OPTIONAL PARAMETERS

-
  size    - The size of the name buffer.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 28, 2008
-
-

SOURCE

-
  SUBROUTINE h5rget_name_region_f(loc_id, ref, name, hdferr, size)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for the dataset containing the reference
-                                           ! or for the group that dataset is in.
-    TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference
-    INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size     ! The size of the name buffer,
-                                                       ! returning 0 (zero) if no name is associated with the identifier
-    CHARACTER(LEN=*), INTENT(OUT) :: name  ! A name associated with the referenced object or dataset region.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5rget_obj_type_f

- -

[ Top ] [ H5R (F03) ] [ Subroutines ]

-

NAME

-
  h5rget_obj_type_f
-
-

PURPOSE

-
  Retrieves the type of object that an object reference points to.
-
-

INPUTS

-
  loc_id   - Identifier for the dataset containing the reference or
-             for the group that dataset is in.
-  ref_type - Type of reference to query.
-  ref      - Reference to query.
-
-

OUTPUTS

-
  obj_type - Type of referenced object. 
-               H5G_UNKNOWN_F (-1)
-               H5G_LINK_F      0
-               H5G_GROUP_F     1
-               H5G_DATASET_F   2
-               H5G_TYPE_F      3
-              
-  hdferr   - error code
-               Success:  0
-               Failure: -1
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  Decemeber 17, 2008
-
-

SOURCE

-
  SUBROUTINE h5rget_obj_type_f(loc_id, ref_type, ref, obj_type, hdferr)
-    USE, INTRINSIC :: ISO_C_BINDING
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id
-    INTEGER, INTENT(IN) :: ref_type
-    TYPE(C_PTR), INTENT(IN) :: ref
-    INTEGER, INTENT(OUT) :: obj_type
-    INTEGER, INTENT(OUT) :: hdferr
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Rff_F90_f90.html b/fortran/doc/DevelGuide/src/H5Rff_F90_f90.html deleted file mode 100644 index 7d20d0c..0000000 --- a/fortran/doc/DevelGuide/src/H5Rff_F90_f90.html +++ /dev/null @@ -1,305 +0,0 @@ - - - - - - - -./src/H5Rff_F90.f90 - - - - - -
-
- -

H5R (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5R_PROVISIONAL
-
-

FILE

-
  fortran/src/H5Rff_F90.f90
-
-

PURPOSE

-
  This file contains Fortran 90 interfaces for H5R functions. It contains
-  the same functions as H5Rff_F03.f90 but excludes the Fortran 2003 functions
-  and the interface listings. This file will be compiled instead of H5Rff_F03.f90
-  if Fortran 2003 functions are not enabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5R function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5rcreate_object_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rcreate_object_f
-
-

PURPOSE

-
  Creates reference to the object
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the object at the specified location
-
-

OUTPUTS

-
  ref           - reference to the specified object
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rcreate_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rcreate_object_f(loc_id, name, ref, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the object at location specified
-                                           ! by loc_id identifier
-    TYPE(hobj_ref_t_f), INTENT(OUT) :: ref ! Object reference
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5rcreate_region_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rcreate_region_f
-
-

PURPOSE

-
  Creates reference to the dataset region
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the dataset at the specified location
-  space_id      - dataspace identifier that describes selected region
-
-

OUTPUTS

-
  ref           - reference to the dataset region
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rcreate_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rcreate_region_f(loc_id, name, space_id, ref, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Location identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the dataset at location specified
-                                           ! by loc_id identifier
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Dataset's dataspace identifier
-    TYPE(hdset_reg_ref_t_f), INTENT(OUT) :: ref ! Dataset region reference
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5rdereference_object_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rdereference_object_f
-
-

PURPOSE

-
  Opens the HDF5 object referenced
-
-

INPUTS

-
  dset_id  - identifier of the dataset containing reference
-  ref      - reference to open
-
-

OUTPUTS

-
  obj_id   - object_identifier
-  hdferr   - error code
-              Success:  0
-              Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rdereference_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rdereference_object_f(dset_id, ref, obj_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id   ! Dataset identifier
-    TYPE(hobj_ref_t_f), INTENT(IN) :: ref   ! Object reference
-    INTEGER(HID_T), INTENT(OUT) :: obj_id   ! Object identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5rdereference_region_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rdereference_region_f
-
-

PURPOSE

-
  Opens the dataset region
-
-

INPUTS

-
  dset_id       - identifier of the dataset containing
-                  reference to teh regions
-  ref           - reference to open
-
-

OUTPUTS

-
  obj_id        - dataspace identifier
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rdereference_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rdereference_region_f(dset_id, ref, obj_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id      ! Dataset identifier
-    TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Object reference
-    INTEGER(HID_T), INTENT(OUT) :: obj_id   ! Dataspace identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5rget_name_object_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rget_name_object_f
-
-

PURPOSE

-
  Retrieves a name of a referenced object.
-
-

INPUTS

-
  loc_id  - Identifier for the dataset containing the reference or for the group that dataset is in.
-  ref     - An object or dataset region reference.
-
-

OUTPUTS

-
  name    - A name associated with the referenced object or dataset region.
-
-  hdferr  - error code
-             Success:  0
-             Failure: -1
-
-

OPTIONAL PARAMETERS

-
  size    - The size of the name buffer.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 28, 2008
-
- SOURCES
- or for the group that dataset is in.
- returning 0 (zero) if no name is associated with the identifier
-
- -
- -

h5rget_name_region_f

- -

[ Top ] [ H5R (F90) ] [ Subroutines ]

-

NAME

-
  h5rget_name_region_f
-
-

PURPOSE

-
  Retrieves a name of a dataset region.
-
-

INPUTS

-
  loc_id        - Identifier for the dataset containing the reference or
-                  for the group that dataset is in.
-  ref           - An object or dataset region reference.
-
-

OUTPUTS

-
  name          - A name associated with the referenced object or dataset region.
-  hdferr        - error code
-                   Success:  0
-                   Failure: -1
-
-

OPTIONAL PARAMETERS

-
  size          - The size of the name buffer.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 28, 2008
-
-

SOURCE

-
  SUBROUTINE h5rget_name_region_f(loc_id, ref, name, hdferr, size)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id   ! Identifier for the dataset containing the reference
-                                           ! or for the group that dataset is in.
-    TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref       ! Object reference
-    INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size   ! The size of the name buffer,
-                                                     ! returning 0 (zero) if no name is associated 
-                                                     ! with the identifier
-    CHARACTER(LEN=*), INTENT(OUT) :: name  ! A name associated with the referenced object or dataset region.
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Rff_f90.html b/fortran/doc/DevelGuide/src/H5Rff_f90.html deleted file mode 100644 index 2b60b08..0000000 --- a/fortran/doc/DevelGuide/src/H5Rff_f90.html +++ /dev/null @@ -1,148 +0,0 @@ - - - - - - - -./src/H5Rff.f90 - - - - - -
-
- -

H5R

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5R
-
-

FILE

-
  fortran/src/H5Rff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5R functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5R function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5rget_object_type_obj_f

- -

[ Top ] [ H5R ] [ Subroutines ]

-

NAME

-
  h5rget_object_type_obj_f
-
-

PURPOSE

-
  Retrieves the type of object that an object reference points to.
-
-

INPUTS

-
  dset_id       - identifier of the dataset containing
-                  reference to the objects
-  ref           - reference to open
-
-

OUTPUTS

-
  obj_type      - object_type, possible values:
-                    H5G_UNKNOWN_F     (-1)
-                    H5G_GROUP_F        0
-                    H5G_DATASET_F      1
-                    H5G_TYPE_F         2
-                    H5G_LINK_F         3
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rget_object_type_f
-  subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rget_object_type_obj_f(dset_id, ref, obj_type, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id   ! Dataset identifier
-    TYPE(hobj_ref_t_f), INTENT(IN) :: ref   ! Object reference
-    INTEGER, INTENT(OUT) :: obj_type     ! Object type
-                                         !  H5G_UNKNOWN_F     (-1)
-                                         !  H5G_GROUP_F        0
-                                         !  H5G_DATASET_F      1
-                                         !  H5G_TYPE_F         2
-                                         !  H5G_LINK_F         3
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code
-
- -
- -

h5rget_region_region_f

- -

[ Top ] [ H5R ] [ Subroutines ]

-

NAME

-
  h5rget_region_region_f
-
-

PURPOSE

-
  Retrieves a dataspace with the specified region selected
-
-

INPUTS

-
  dset_id       - identifier of the dataset containing
-                  reference to the regions
-  ref           - reference to open
-
-

OUTPUTS

-
  space_id      - dataspace identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

NOTES

-
  This is a module procedure for the h5rget_region_f subroutine.
-
-

SOURCE

-
  SUBROUTINE h5rget_region_region_f(dset_id, ref, space_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dset_id      ! Dataset identifier
-    TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Dataset region reference
-    INTEGER(HID_T), INTENT(OUT) :: space_id    ! Space identifier
-    INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Sf_c.html b/fortran/doc/DevelGuide/src/H5Sf_c.html deleted file mode 100644 index ebdedf7..0000000 --- a/fortran/doc/DevelGuide/src/H5Sf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Sf.c - - - - - -
-
- -

H5Sf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5S Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Sff_f90.html b/fortran/doc/DevelGuide/src/H5Sff_f90.html deleted file mode 100644 index c26b191..0000000 --- a/fortran/doc/DevelGuide/src/H5Sff_f90.html +++ /dev/null @@ -1,1165 +0,0 @@ - - - - - - - -./src/H5Sff.f90 - - - - - -
-
- -

H5S

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5S
-
-

FILE

-
  fortran/src/H5Sff.f90
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5S functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5S function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5sclose_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sclose_f
-
-

PURPOSE

-
  Releases and terminates access to a dataspace.
-
-

INPUTS

-
  space_id    - identifier of dataspace to release
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sclose_f(space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5scopy_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5scopy_f
-
-

PURPOSE

-
  Creates an exact copy of a dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  new_space_id  - identifier of dataspace's copy
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

NOTES

-

SOURCE

-
          SUBROUTINE h5scopy_f(space_id, new_space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HID_T), INTENT(OUT) :: new_space_id
-                                             ! Identifier of dataspace's copy
-            INTEGER, INTENT(OUT) :: hdferr   ! Error code
-
- -
- -

h5screate_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5screate_f
-
-

PURPOSE

-
  Creates a new dataspace of a specified type.
-
-

INPUTS

-
  classtype   - the type of the dataspace to be created
-
-

OUTPUTS

-
  space_id    - dataspace identifier
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

NOTES

-

SOURCE

-
          SUBROUTINE h5screate_f(classtype, space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER, INTENT(IN) :: classtype     ! The type of the dataspace
-                                                 ! to be created.
-                                                 ! Possible values are:
-                                                 !  H5S_SCALAR_F (0)
-                                                 !  H5S_SIMPLE_F(1)
-                                                 !  H5S_NULL_F(2)
-            INTEGER(HID_T), INTENT(OUT) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5screate_simple_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5screate_simple_f
-
-

PURPOSE

-
  Creates a new simple data space and opens it for access      .
-
-

INPUTS

-
  rank        - number of dimensions
-  dims        - an array of the size of each dimension
-
-

OUTPUTS

-
  space_id    - dataspace identifier
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  maxdims     - an array of the maximum size of each dimension
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5screate_simple_f(rank, dims, space_id, hdferr, maxdims)
-
-            IMPLICIT NONE
-            INTEGER, INTENT(IN) :: rank             ! Number of dataspace dimensions
-            INTEGER(HSIZE_T), INTENT(IN) :: dims(rank)
-                                                    ! Array with the dimension
-                                                    ! sizes
-            INTEGER(HID_T), INTENT(OUT) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-            INTEGER(HSIZE_T), OPTIONAL, INTENT(IN) :: maxdims(rank)
-                                                    ! Array with the maximum
-                                                    ! dimension sizes
-
- -
- -

H5Sdecode_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  H5Sdecode_f
-
-

PURPOSE

-
  Decode a binary object description of data space and return a new object handle.
-
-

INPUTS

-
  buf   -  Buffer for the data space object to be decoded.
-  obj_id        - Object ID
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 26, 2008
-
-

SOURCE

-
  SUBROUTINE h5sdecode_f(buf, obj_id, hdferr)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: buf ! Buffer for the data space object to be decoded.
-    INTEGER(HID_T), INTENT(OUT) :: obj_id  ! Object ID
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code
-
- -
- -

H5Sencode_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  H5Sencode_f
-
-

PURPOSE

-
  Encode a data space object description into a binary buffer.
-
-

INPUTS

-
  obj_id        - Identifier of the object to be encoded.
-  buf   - Buffer for the object to be encoded into.
-  nalloc        - The size of the allocated buffer.
-
-

OUTPUTS

-
  nalloc        - The size of the buffer needed.
-  hdferr      - Returns 0 if successful and -1 if fails.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  March 26, 2008
-
-

SOURCE

-
  SUBROUTINE h5sencode_f(obj_id, buf, nalloc, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id ! Identifier of the object to be encoded.
-    CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer for the object to be encoded into.
-    INTEGER(SIZE_T), INTENT(INOUT) :: nalloc ! The size of the allocated buffer.
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code
-
- -
- -

h5sextent_copy_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sextent_copy_f
-
-

PURPOSE

-
  Copies the extent of a dataspace.
-
-

INPUTS

-
  dest_space_id         - the identifier for the dataspace to which
-  the extent is copied
-  source_space_id       - the identifier for the dataspace from
-  which the extent is copied
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

NOTES

-

SOURCE

-
          SUBROUTINE h5sextent_copy_f(dest_space_id, source_space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: dest_space_id  ! Identifier of destination
-                                                         ! dataspace
-            INTEGER(HID_T), INTENT(IN) :: source_space_id ! Identifier of source
-                                                          ! dataspace
-            INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5sextent_equal_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sextent_equal_f
-
-

PURPOSE

-
  Determines whether two dataspace extents are equal.
-
-

INPUTS

-
  space1_id     - First dataspace identifier.
-  space2_id     - Second dataspace identifier.
-
-

OUTPUTS

-
  Equal         - .TRUE. if equal, .FALSE. if unequal.
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 2, 2008
-
-

SOURCE

-
  SUBROUTINE h5sextent_equal_f(space1_id, space2_id, equal, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: space1_id ! First dataspace identifier.
-    INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier.
-    LOGICAL, INTENT(OUT) :: Equal ! .TRUE. if equal, .FALSE. if unequal.
-    INTEGER, INTENT(OUT) :: hdferr                ! Error code
-
- -
- -

h5sget_select_bounds_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_bounds_f
-
-

PURPOSE

-
  Gets the bounding box containing the current selection.
-
-

INPUTS

-
  space_id    - dataspace identifier
-
-

OUTPUTS

-
  start       - starting coordinates of bounding box
-  end         - ending coordinates of bounding box
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
  SUBROUTINE  h5sget_select_bounds_f(space_id, start, END, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-    INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: start
-                                           ! Starting coordinates of the bounding box.
-    INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: END
-                                           !Ending coordinates of the bounding box,
-                                           !i.e., the coordinates of the diagonally
-                                           !opposite corner
-    INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5sget_select_elem_npoints_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_elem_npoints_f
-
-

PURPOSE

-
  Gets the number of element points in the current selection
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  num_points    - number of element points in the current
-                  dataspace selection
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_select_elem_npoints_f(space_id, num_points, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSSIZE_T), INTENT(OUT) :: num_points
-                                             !number of element points
-                                             !in the current dataspace
-                                             !selection
-            INTEGER, INTENT(OUT) :: hdferr   ! Error code
-
- -
- -

h5sget_select_elem_pointlist_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_elem_pointlist_f
-
-

PURPOSE

-
  Gets the list of element points currently selected.
-
-

INPUTS

-
  space_id    - dataspace identifier
-  startpoint  - element point to start with
-  num_points  - number of elemnt points to get
-
-

OUTPUTS

-
  buf         - buffer with element points selected
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_select_elem_pointlist_f(space_id, startpoint, &
-                                                    num_points, buf, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSIZE_T), INTENT(IN) :: startpoint
-                                             !Element point to start with.
-            INTEGER(HSIZE_T), INTENT(IN) :: num_points
-                                             !Number of element points to get
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf
-                                             !List of element points selected
-            INTEGER, INTENT(OUT) :: hdferr   ! Error code
-
- -
- -

h5sget_select_hyper_blocklist_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_hyper_blocklist_f
-
-

PURPOSE

-
  Gets the list of hyperslab blocks currently selected.
-
-

INPUTS

-
  space_id    - dataspace identifier
-  startblock  - hyperslab block to start with
-  num_blocks  - number of blocks to get
-
-

OUTPUTS

-
  buf         - buffer to hold block list
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_select_hyper_blocklist_f(space_id, startblock, &
-                                                    num_blocks, buf, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSIZE_T), INTENT(IN) :: startblock
-                                             !Hyperslab block to start with.
-            INTEGER(HSIZE_T), INTENT(IN) :: num_blocks
-                                             !number of hyperslab blocks
-                                             !to get in the current dataspace
-                                             !selection
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf
-                                             !List of hyperslab blocks selected
-            INTEGER, INTENT(OUT) :: hdferr   ! Error code
-
- -
- -

h5sget_select_hyper_nblocks_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_hyper_nblocks_f
-
-

PURPOSE

-
  Get number of hyperslab blocks.
-
-

INPUTS

-
  space_id    - dataspace identifier
-
-

OUTPUTS

-
  num_blocks  - number of hyperslab blocks in the current
-                hyperslab selection
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_select_hyper_nblocks_f(space_id, num_blocks, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSSIZE_T), INTENT(OUT) :: num_blocks
-                                             !number of hyperslab blocks
-                                             !in the current dataspace
-                                             !selection
-            INTEGER, INTENT(OUT) :: hdferr   ! Error code
-
- -
- -

h5sget_select_npoints_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_npoints_f
-
-

PURPOSE

-
  Determines the number of elements in a dataspace selection.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  npoints       - number of points in the dataspace selection
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_select_npoints_f(space_id, npoints, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id     ! Dataspace identifier
-            INTEGER(HSSIZE_T), INTENT(OUT) :: npoints  ! Number of elements in the
-                                                       ! selection
-            INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5sget_select_type_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_select_type_f
-
-

PURPOSE

-
  Retrieve the type of selection
-
-

INPUTS

-
  space_id      - dataspace iidentifier with selection
-
-

OUTPUTS

-
  type          - flag, valid values are:
-                    H5S_SEL_ERROR_F
-                    H5S_SEL_NONE_F
-                    H5S_SEL_POINTS_F
-                    H5S_SEL_HYPERSLABS_F
-                    H5S_SEL_ALL_F
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  October 7, 2002
-
-

SOURCE

-
          SUBROUTINE h5sget_select_type_f(space_id, type, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(INOUT) :: space_id ! Dataspace identifier to
-            INTEGER, INTENT(OUT) :: type        ! Selection type
-                                                !  H5S_SEL_ERROR_F
-                                                !  H5S_SEL_NONE_F
-                                                !  H5S_SEL_POINTS_F
-                                                !  H5S_SEL_HYPERSLABS_F
-                                                !  H5S_SEL_ALL_F
-            INTEGER, INTENT(OUT) :: hdferr     ! Error code
-
- -
- -

h5sget_simple_extent_dims_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_simple_extent_dims_f
-
-

PURPOSE

-
  Retrieves dataspace dimension size and maximum size.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  dims          - array to store size of each dimension
-  maxdims       - array to store maximum size of each
-  dimension
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_simple_extent_dims_f(space_id, dims, maxdims, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims
-                                                   ! Array to store dimension sizes
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims
-                                                   ! Array to store max dimension
-                                                   ! sizes
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code: -1 on failure,
-                                                   ! number of dimensions on
-                                                   ! on success
-
- -
- -

h5sget_simple_extent_ndims_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_simple_extent_ndims_f
-
-

PURPOSE

-
  Determines the dimensionality of a dataspace
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  rank          - number of dataspace dimensions
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_simple_extent_ndims_f(space_id, rank, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id     ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: rank               ! Number of dimensions
-            INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5sget_simple_extent_npoints_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_simple_extent_npoints_f
-
-

PURPOSE

-
  Determines the number of elements in a dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  npoints       - number of elements in the dataspace
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_simple_extent_npoints_f(space_id, npoints, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id     ! Dataspace identifier
-            INTEGER(HSIZE_T), INTENT(OUT) :: npoints  ! Number of elements in
-                                                       ! dataspace
-            INTEGER, INTENT(OUT) :: hdferr             ! Error code
-
- -
- -

h5sget_simple_extent_type_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sget_simple_extent_type_f
-
-

PURPOSE

-
  Determine the current class of a dataspace
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  classtype     - class type, possible values are:
-  H5S_NO_CLASS_F (-1)
-  H5S_SCALAR_F (0)
-  H5S_SIMPLE_F (1)
-  H5S_NULL_F   (2)
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sget_simple_extent_type_f(space_id, classtype, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: classtype      ! Class type , possible values
-                                                   ! are:
-                                                   !  H5S_NO_CLASS_F (-1)
-                                                   !  H5S_SCALAR_F (0)
-                                                   !  H5S_SIMPLE_F (1)
-                                                   !  H5S_NULL_F   (2)
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5sis_simple_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sis_simple_f
-
-

PURPOSE

-
  Determines whether a dataspace is a simple dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  status        - flag to indicate if dataspace
-  is simple or not
-  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sis_simple_f(space_id, status, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id  ! Dataspace identifier
-            LOGICAL, INTENT(OUT) :: status      ! Flag, idicates if dataspace
-                                                ! is simple or not ( TRUE or
-                                                ! FALSE)
-            INTEGER, INTENT(OUT) :: hdferr      ! Error code
-
- -
- -

h5soffset_simple_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5soffset_simple_f
-
-

PURPOSE

-
  Sets the offset of a simple dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-  offset        - the offset at which to position the
-  selection
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  NONE
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5soffset_simple_f(space_id, offset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER(HSSIZE_T), DIMENSION(*), INTENT(IN) ::  offset
-                                                   ! The offset at which to position
-                                                   ! the selection
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- -

h5sselect_all_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sselect_all_f
-
-

PURPOSE

-
  Selects the entire dataspace.
-
-

INPUTS

-
  space_id    - Identifier for the dataspace in which
-                selection being made
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sselect_all_f(space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id  ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5sselect_elements_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sselect_elements_f
-
-

PURPOSE

-
  Selects elements to be included in the selection for
-  a dataspace
-
-

INPUTS

-
  space_id      - dataspace identifier
-  operator      - flag, valid values are:
-                   H5S_SELECT_SET_F 
-                   H5S_SELECT_APPEND_F 
-                   H5S_SELECT_PREPEND_F
-  rank          - number of dataspace dimensions
-  num_elements  - number of elements to be selected
-  coord         - 2D (rank x num_elements) array with the
-                  elements coordinates ( 1-based); in C the
-                  array is stored in 2D as (num_element x rank)
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
  SUBROUTINE h5sselect_elements_f(space_id, OPERATOR, rank, &
-       num_elements, coord, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T),   INTENT(IN)                                :: space_id
-    INTEGER,          INTENT(IN)                                :: OPERATOR
-    INTEGER,          INTENT(IN)                                :: rank
-    INTEGER(SIZE_T),  INTENT(IN)                                :: num_elements
-    INTEGER(HSIZE_T), INTENT(IN) , DIMENSION(rank,num_elements) :: coord
-    INTEGER,          INTENT(OUT)                               :: hdferr 
-
- -
- -

h5sselect_hyperslab_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sselect_hyperslab_f
-
-

PURPOSE

-
  Selects a hyperslab region to add to the current selected
-  region
-
-

INPUTS

-
  space_id      - dataspace identifier
-  operator      - flag, valid values are:
-  H5S_SELECT_SET_F (0)
-  H5S_SELECT_OR_F (1)
-  start         - array with hyperslab offsets
-  count         - number of blocks included in the
-  hyperslab
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  stride        - array with hyperslab strides
-  block         - array with hyperslab block sizes
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sselect_hyperslab_f(space_id, operator, start, count, &
-                                           hdferr, stride, block)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(IN) :: operator     ! Flag, valid values are:
-                                                ! H5S_SELECT_SET_F (0)
-                                                ! H5S_SELECT_OR_F (1)
-                                                !
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start
-                                          ! Starting coordinates of the hyperslab
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count
-                                          ! Number of blocks to select
-                                          ! from dataspace
-            INTEGER, INTENT(OUT) :: hdferr     ! Error code
-            INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: stride
-                                          ! Array of how many elements to move
-                                          ! in each direction
-            INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: block
-                                          ! Sizes of element block
-
- -
- -

h5sselect_none_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sselect_none_f
-
-

PURPOSE

-
  Resets the selection region to include no elements.
-
-

INPUTS

-
  space_id    - the identifier for the dataspace in which
-                the selection is being reset.
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sselect_none_f(space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id  ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5sselect_valid_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sselect_valid_f
-
-

PURPOSE

-
  Verifies that the selection is within the extent of
-  the dataspace.
-
-

INPUTS

-
  space_id      - identifier for the dataspace for which
-  selection is verified
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sselect_valid_f(space_id, status, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id  ! Dataspace identifier
-            LOGICAL, INTENT(OUT) :: status          ! TRUE if the selection is
-                                                    ! contained within the extent,
-                                                    ! FALSE otherwise.
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5sset_extent_none_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sset_extent_none_f
-
-

PURPOSE

-
  Removes the extent from a dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sset_extent_none_f(space_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id  ! Dataspace identifier
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5sset_extent_simple_f

- -

[ Top ] [ H5S ] [ Subroutines ]

-

NAME

-
  h5sset_extent_simple_f
-
-

PURPOSE

-
  Sets or resets the size of an existing dataspace.
-
-

INPUTS

-
  space_id      - dataspace identifier
-  rank          - dataspace number of dimensions
-  current_size          - array with the new sizes of dimensions
-  maximum_size          - array with the new maximum sizes of
-  dimensions
-
-

OUTPUTS

-
  hdferr      - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 6, 2001
-
-

SOURCE

-
          SUBROUTINE h5sset_extent_simple_f(space_id, rank, current_size, &
-                                            maximum_size, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier
-            INTEGER, INTENT(IN) :: rank            ! Dataspace rank
-            INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: current_size
-                                                   ! Array with the new sizes
-                                                   ! of dimensions
-            INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size
-                                                   ! Array with the new maximum
-                                                   ! sizes of dimensions
-                                                   ! sizes
-            INTEGER, INTENT(OUT) :: hdferr         ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Tf_c.html b/fortran/doc/DevelGuide/src/H5Tf_c.html deleted file mode 100644 index b36c2a5..0000000 --- a/fortran/doc/DevelGuide/src/H5Tf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Tf.c - - - - - -
-
- -

H5Tf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5T Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Tff_f90.html b/fortran/doc/DevelGuide/src/H5Tff_f90.html deleted file mode 100644 index 3b7dfe8..0000000 --- a/fortran/doc/DevelGuide/src/H5Tff_f90.html +++ /dev/null @@ -1,2378 +0,0 @@ - - - - - - - -./src/H5Tff.f90 - - - - - -
-
- -

H5T

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5T
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5T functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5T function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5tarray_create_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tarray_create_f
-
-

PURPOSE

-
  Creates an array datatype object.
-
-

INPUTS

-
  base_id       - datatype identifier for the array
-                  base datatype
-  rank          - rank of the array
-  dims          - array dimension sizes
-
-

OUTPUTS

-
  type_id       - array datatype identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tarray_create_f(base_id, rank, dims, type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: base_id ! identifier of array base datatype
-            INTEGER, INTENT(IN) ::  rank ! Rank of the array
-            INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims !Sizes of each array dimension
-            INTEGER(HID_T), INTENT(OUT) :: type_id ! identifier of the array datatype
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tclose_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tclose_f
-
-

PURPOSE

-
  Releases a datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tclose_f(type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tcommit_anon_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcommit_anon_f
-
-

PURPOSE

-
  Commits a transient datatype to a file,
-  creating a new named datatype,
-  but does not link it into the file structure.
-
-

INPUTS

-
  loc_id        - A file or group identifier specifying the file
-                  in which the new named datatype is to be created.
-  dtype_id      - A datatype identifier.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  tcpl_id       - A datatype creation property list identifier.
-                  (H5P_DEFAULT_F for the default property list.)
-  tapl_id       - A datatype access property list identifier.
-                  should always be passed as the value H5P_DEFAULT_F.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 25, 2008
-
-

SOURCE

-
  SUBROUTINE h5tcommit_anon_f(loc_id, dtype_id, hdferr, tcpl_id, tapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! A file or group identifier specifying
-                                          ! the file in which the new named datatype
-                                          ! is to be created.
-    INTEGER(HID_T), INTENT(IN) :: dtype_id  ! Datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id ! A datatype creation property
-                                                    ! list identifier.
-                                                    ! (H5P_DEFAULT_F for the default property list.)
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! A datatype access property list identifier.
-                                                    ! should always be passed as the value H5P_DEFAULT_F.
-
- -
- -

h5tcommit_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcommit_f
-
-

PURPOSE

-
  Commits a transient datatype to a file, creating a
-  new named datatype.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - name of the datatype to be stored
-                  at the specified location
-  type_id       - identifier of a datatype to be stored
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  lcpl_id       - Link creation property list
-  tcpl_id       - Datatype creation property list
-  tapl_id       - Datatype access property list
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
        - Explicit Fortran interfaces were added for
-          called C functions (it is needed for Windows
-          port).  March 7, 2001
-
-        - Added optional parameters introduced in version 1.8
-          M. Scot Breitenfeld
-
-

SOURCE

-
  SUBROUTINE h5tcommit_f(loc_id, name, type_id, hdferr, &
-       lcpl_id, tcpl_id, tapl_id  )
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name
-                                  ! Datatype name within file or group
-    INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr          ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id ! Datatype creation property list
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! Datatype access property list
-
- -
- -

h5tcommitted_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcommitted_f
-
-

PURPOSE

-
  Determines whether a datatype is a named type or a transient type.
-
-

INPUTS

-
  dtype_id      - A datatype identifier.
-
-

OUTPUTS

-
  committed     - .TRUE., if the datatype has been committed
-                  .FALSE., if the datatype has not been committed.
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  February 25, 2008
-
-

SOURCE

-
  SUBROUTINE h5tcommitted_f(dtype_id, committed, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dtype_id  ! A datatype identifier
-    LOGICAL, INTENT(OUT) :: committed ! .TRUE., if the datatype has been committed
-                                      !.FALSE., if the datatype has not been committed.
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code:
-!  Success:  0
-!  Failure: -1
-
- -
- -

h5tcompiler_conv_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcompiler_conv_f
-
-

PURPOSE

-
  Check whether the library’s default conversion is hard conversion.R
-
-

INPUTS

-
  src_id        - Identifier for the source datatype.
-  dst_id        - Identifier for the destination datatype.
-
-

OUTPUTS

-
  flag          - TRUE for compiler conversion, FALSE for library conversion
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 9, 2008
-
-

SOURCE

-
  SUBROUTINE h5tcompiler_conv_f( src_id, dst_id, flag, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: src_id ! Identifier for the source datatype.
-    INTEGER(HID_T), INTENT(IN) :: dst_id ! Identifier for the destination datatype.
-    LOGICAL, INTENT(OUT) :: flag  ! .TRUE. for compiler conversion, .FALSE. for library conversion
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code:
-                                    ! 0 on success and -1 on failure
-
- -
- -

h5tcopy_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcopy_f
-
-

PURPOSE

-
  Creates a copy of exisiting datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  new_type_id   - identifier of datatype's copy
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tcopy_f(type_id, new_type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(HID_T), INTENT(OUT) :: new_type_id
-                                 ! Identifier of datatype's copy
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tcreate_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tcreate_f
-
-

PURPOSE

-
  Creates a new dataype
-
-

INPUTS

-
  class         - datatype class, possible values are:
-                    H5T_COMPOUND_F
-                    H5T_ENUM_F
-                    H5T_OPAQUE_F
-  size          - datattype size
-
-

OUTPUTS

-
  type_id       - datatype identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tcreate_f(class, size, type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER, INTENT(IN) :: class ! Datatype class can be one of
-                                         ! H5T_COMPOUND_F
-                                         ! H5T_ENUM_F
-                                         ! H5T_OPAQUE_F
-            INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the datatype
-            INTEGER(HID_T), INTENT(OUT) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

H5Tdecode_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  H5Tdecode_f
-
-

PURPOSE

-
  Decode a binary object description of data type and return a new object handle.
-
-

INPUTS

-
  buf           -  Buffer for the data space object to be decoded.
-  obj_id        - Object ID
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 9, 2008
-
-

SOURCE

-
  SUBROUTINE h5tdecode_f(buf, obj_id, hdferr)
-    IMPLICIT NONE
-    CHARACTER(LEN=*), INTENT(IN) :: buf ! Buffer for the data space object to be decoded.
-    INTEGER(HID_T), INTENT(OUT) :: obj_id  ! Object ID
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code
-
- -
- -

h5tenaum_insert_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tenaum_insert_f
-
-

PURPOSE

-
  Inserts a new enumeration datatype member.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tenum_insert_f(type_id,  name, value, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(IN) :: name  !Name of  the new member
-            INTEGER, INTENT(IN) :: value !value of the new member
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

H5Tencode_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  H5Tencode_f
-
-

PURPOSE

-
  Encode a data type object description into a binary buffer.
-
-

INPUTS

-
  obj_id        - Identifier of the object to be encoded.
-  buf           - Buffer for the object to be encoded into.
-  nalloc        - The size of the allocated buffer.
-
-

OUTPUTS

-
  nalloc        - The size of the buffer needed.
-  hdferr        - Returns 0 if successful and -1 if fails.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 9, 2008
-
-

SOURCE

-
  SUBROUTINE h5tencode_f(obj_id, buf, nalloc, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: obj_id ! Identifier of the object to be encoded.
-    CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer for the object to be encoded into.
-    INTEGER(SIZE_T), INTENT(INOUT) :: nalloc ! The size of the allocated buffer.
-    INTEGER, INTENT(OUT) :: hdferr     ! Error code
-
- -
- -

h5tenum_create_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tenum_create_f
-
-

PURPOSE

-
  Creates a new enumeration datatype.
-
-

INPUTS

-
  parent_id     - datatype identifier for base datatype
-
-

OUTPUTS

-
  new_type_id   - datatype identifier for the enumeration datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tenum_create_f(parent_id, new_type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: parent_id  ! Datatype identifier for
-                                                     ! the  base datatype
-            INTEGER(HID_T), INTENT(OUT) :: new_type_id
-                                                     !datatype identifier for the
-                                                     ! new enumeration datatype
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tenum_nameof_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tenum_nameof_f
-
-

PURPOSE

-
  Returns the symbol name corresponding to a specified
-  member of an enumeration datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  value         - value of the enumeration datatype
-  namelen       - name buffer size
-
-

OUTPUTS

-
  name          - buffer to hold symbol name
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
- NOTE
-   According to the standard: Because an INTENT(OUT) variable is considered undefined 
-   on entry to the procedure, any default initialization specified for its type will 
-   be applied. So we need to blank out the "name" to be portable and eliminate any 
-   characters the "name' may contain upon entry, depending on compiler implementation.
-
-

SOURCE

-
  SUBROUTINE h5tenum_nameof_f(type_id,  value, namelen, name, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(OUT) :: name  !Name of the  enumeration datatype.
-            INTEGER(SIZE_T), INTENT(IN) :: namelen !length of the name
-            INTEGER, INTENT(IN) :: value !value of the  enumeration datatype.
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tenum_valuof_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tenum_valuof_f
-
-

PURPOSE

-
  Returns the value corresponding to a specified
-  member of an enumeration datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  name          - symbol name
-
-

OUTPUTS

-
  value         - value of the enumeration datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tenum_valueof_f(type_id,  name, value, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(IN) :: name  !Name of the  enumeration datatype.
-            INTEGER, INTENT(OUT) :: value !value of the  enumeration datatype.
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tequal_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tequal_f
-
-

PURPOSE

-
  Determines whether two datatype identifiers refer
-  to the same datatype.
-
-

INPUTS

-
  type1_id      - datatype identifier
-  type2_id      - datatype identifier
-
-

OUTPUTS

-
  flag          - TRUE/FALSE flag to indicate
-                  if two datatypes are equal
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tequal_f(type1_id, type2_id, flag, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type1_id ! Datatype identifier
-            INTEGER(HID_T), INTENT(IN) :: type2_id ! Datatype identifier
-            LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag to indicate if two
-                                         ! datatypes are equal
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_array_dims_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_array_dims_f
-
-

PURPOSE

-
  Returns sizes of array dimensions.
-
-

INPUTS

-
  type_id       - array datatype identifier
-
-

OUTPUTS

-
  dims          - buffer to store array datatype dimensions
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_array_dims_f(type_id, dims, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Array datatype identifier
-            INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) ::  dims !buffer to store array datatype
-                                                                ! dimensions
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_array_ndims_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_array_ndims_f
-
-

PURPOSE

-
  Returns the rank of an array datatype.
-
-

INPUTS

-
  type_id       - array datatype identifier
-
-

OUTPUTS

-
  ndims         - number of array dimensions
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_array_ndims_f(type_id, ndims, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Array datatype identifier
-            INTEGER, INTENT(OUT) ::  ndims ! number of array dimensions
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_class_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_class_f
-
-

PURPOSE

-
  Returns the datatype class identifier.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  class         - class, possible values are:
-                   H5T_NO_CLASS_F (-1)
-                   H5T_INTEGER_F  (0)
-                   H5T_FLOAT_F (1)
-                   H5T_TIME_F  (2)
-                   H5T_STRING_F (3)
-                   H5T_BITFIELD_F (4)
-                   H5T_OPAQUE_F (5)
-                   H5T_COMPOUND_F (6)
-                   H5T_REFERENCE_F (7)
-                   H5T_ENUM_F (8)
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_class_f(type_id, class, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: class
-                           ! Datatype class, possible values are:
-                                          ! H5T_NO_CLASS_F (-1)
-                                          ! H5T_INTEGER_F  (0)
-                                          ! H5T_FLOAT_F (1)
-                                          ! H5T_TIME_F  (2)
-                                          ! H5T_STRING_F (3)
-                                          ! H5T_BITFIELD_F (4)
-                                          ! H5T_OPAQUE_F (5)
-                                          ! H5T_COMPOUND_F (6)
-                                          ! H5T_REFERENCE_F (7)
-                                          ! H5T_ENUM_F (8)
-          INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_create_plist_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_create_plist_f
-
-

PURPOSE

-
  Returns a copy of a datatype creation property list.
-
-

INPUTS

-
  dtype_id      - Datatype identifier
-
-

OUTPUTS

-
  dtpl_id       - Datatype property list identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  April 9, 2008
-
-

SOURCE

-
  SUBROUTINE h5tget_create_plist_f(dtype_id, dtpl_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dtype_id  ! Datatype identifier
-    INTEGER(HID_T), INTENT(OUT) :: dtpl_id  ! Datatype property list identifier.
-    INTEGER, INTENT(OUT) :: hdferr       ! Error code:
-                                         ! 0 on success and -1 on failure
-
- -
- -

h5tget_cset_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_cset_f
-
-

PURPOSE

-
  Retrieves the character set type of a string datatype.
-
-

INPUTS

-
  type_id  - Datatype identifier
-
-

OUTPUTS

-
  cset     - Character set type of a string datatype
-              Possible values are:
-              H5T_CSET_ASCII_F = 0
-              H5T_CSET_UTF8_F
-  hdferr   - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_cset_f(type_id, cset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: cset   ! character set type of a string datatype
-                                           !  Possible values are:
-                                           !  H5T_CSET_ASCII_F = 0
-                                           !  H5T_CSET_UTF8_F
-            INTEGER, INTENT(OUT) :: hdferr ! Error code
-
- -
- -

h5tget_ebias_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_ebias_f
-
-

PURPOSE

-
  Retrieves the exponent bias of a floating-point type.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  ebias         - datatype exponent bias
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_ebias_f(type_id, ebias, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(OUT) :: ebias ! Datatype exponent bias of a floating-point type
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_fields_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_fields_f
-
-

PURPOSE

-
  Retrieves floating point datatype bit field information.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  spos          - sign bit-position
-  epos          - exponent bit-position
-  esize         - size of exponent in bits
-  mpos          - mantissa position
-  msize         - size of mantissa in bits
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(OUT) :: spos   ! sign bit-position
-            INTEGER(SIZE_T), INTENT(OUT) :: epos   ! exponent bit-position
-            INTEGER(SIZE_T), INTENT(OUT) :: esize  ! size of exponent in bits
-            INTEGER(SIZE_T), INTENT(OUT) :: mpos   ! mantissa bit-position
-            INTEGER(SIZE_T), INTENT(OUT) :: msize  ! size of mantissa in bits
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_inpad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_inpad_f
-
-

PURPOSE

-
  Retrieves the internal padding type for unused bits
-  in floating-point datatypes.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  padtype       - padding type for unused bits
-                  Possible values of padding type are:
-                    H5T_PAD_ZERO_F = 0
-                    H5T_PAD_ONE_F = 1
-                    H5T_PAD_BACKGROUND_F = 2
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_inpad_f(type_id, padtype, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: padtype ! padding type for unused bits
-                                            ! in floating-point datatypes.
-                                            ! Possible values of padding type are:
-                                            ! H5T__PAD_ZERO_F = 0
-                                            ! H5T__PAD_ONE_F = 1
-                                            ! H5T__PAD_BACKGROUND_F = 2
-
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_member_class_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_class_f
-
-

PURPOSE

-
  Returns datatype class of compound datatype member.
-
-

INPUTS

-
  type_id       - datartpe identifier
-  member_no     - index of compound datatype member
-
-

OUTPUTS

-
  class         - class type for compound dadtype member
-                  Valid classes:
-                    H5T_NO_CLASS_F (error)
-                    H5T_INTEGER_F
-                    H5T_FLOAT_F
-                    H5T_TIME_F
-                    H5T_STRING_F
-                    H5T_BITFIELD_F
-                    H5T_OPAQUE_F
-                    H5T_COMPOUND_F
-                    H5T_REFERENCE_F
-                    H5T_ENUM_F
-                    H5T_VLEN_F
-                    H5T_ARRAY_F
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  April 6, 2005
-
-

SOURCE

-
  SUBROUTINE h5tget_member_class_f(type_id, member_no, class, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier
-            INTEGER, INTENT(IN)       :: member_no  ! Member number
-            INTEGER, INTENT(OUT)     :: class      ! Member class
-            INTEGER, INTENT(OUT) :: hdferr      ! Error code
-
- -
- -

h5tget_member_index_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_index_f
-
-

PURPOSE

-
  Retrieves the index of a compound or enumeration datatype member.
-
-

INPUTS

-
  type_id       - datatype identifier
-  name          - name of the field or member whose index to
-  to be retrieved from the datatype.
-
-

OUTPUTS

-
  index         - 0-based index of the filed or member (0 to N-1)
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  September 26, 2002
-
-

SOURCE

-
  SUBROUTINE h5tget_member_index_f(type_id, name, index, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(IN) :: name   ! Field or member name
-            INTEGER, INTENT(OUT) :: index          ! Field or member index
-            INTEGER, INTENT(OUT) :: hdferr          ! Error code
-
- -
- -

h5tget_member_name_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_name_f
-
-

PURPOSE

-
  Retrieves the name of a field of a compound datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  index         - filed index (0-based)
-
-

OUTPUTS

-
  member_name   - buffer to hold member's name
-  namelen       - name length
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_member_name_f(type_id, index, member_name,  namelen, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: index !Field index (0-based) of the field name to retrieve
-            CHARACTER(LEN=*), INTENT(OUT) :: member_name !name of a field of
-                                                         !a compound datatype
-            INTEGER, INTENT(OUT) :: namelen ! Length of the name
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_member_offset_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_offset_f
-
-

PURPOSE

-
  Retrieves the offset of a field of a compound datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  member_no     - number of the field
-
-

OUTPUTS

-
  offset        - byte offset of the requested field
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_member_offset_f(type_id, member_no, offset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: member_no !Number of the field
-                                                       !whose offset is requested
-            INTEGER(SIZE_T), INTENT(OUT) :: offset !byte offset of the beginning of the field
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_member_type_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_type_f
-
-

PURPOSE

-
  Returns the datatype of the specified member.
-
-

INPUTS

-
  type_id       - compound datatype identifier
-  field_idx     - field index (0-based)
-
-

OUTPUTS

-
  datatype      - idnetifier of the member's datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_member_type_f(type_id,  field_idx, datatype, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: field_idx !Field index (0-based) of the field type to retrieve
-            INTEGER(HID_T), INTENT(OUT) :: datatype !identifier of a copy of
-                                                    !the datatype of the field
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_member_value_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_member_value_f
-
-

PURPOSE

-
  Returns the value of an enumeration datatype member.
-
-

INPUTS

-
  type_id       - datatype identifier
-  member_no     - number of the enumeration datatype member
-
-

OUTPUTS

-
  value         - value of the enumeration datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_member_value_f(type_id,  member_no, value, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: member_no !Number of the enumeration datatype member
-            INTEGER, INTENT(OUT) :: value !value of the  enumeration datatype.
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_native_type_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_native_type_f
-
-

PURPOSE

-
  Returns the native datatype of a specified datatype.
-
-

INPUTS

-
  dtype_id      - Datatype identifier for the dataset datatype.
-  
-  direction     - Direction of search:
-                  H5T_DIR_DEFAULT     = 0,    /*default direction is inscendent */
-                  H5T_DIR_ASCEND      = 1,    /*in inscendent order             */
-                  H5T_DIR_DESCEND     = 2     /*in descendent order             */
-  * NOTE: In C it is defined as a structure: H5T_direction_t
-
-

OUTPUTS

-
  native_dtype_id - The native datatype identifier for the specified dataset datatype
-  hdferr          - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  June 18, 2008
-
-

SOURCE

-
  SUBROUTINE h5tget_native_type_f(dtype_id, direction, native_dtype_id, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: dtype_id  ! Datatype identifier
-    INTEGER, INTENT(IN) :: direction  ! Direction of search:
-                                      ! H5T_DIR_ASCEND_F      = 1  in inscendent order
-                                      ! H5T_DIR_DESCEND_F     = 2  in descendent order
-    INTEGER(HID_T), INTENT(OUT) :: native_dtype_id  ! The native datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr    ! Error code:
-                                      ! 0 on success and -1 on failure
-
- -
- -

h5tget_nmembers_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_nmembers_f
-
-

PURPOSE

-
  Retrieves the number of fields in a compound datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  num_members   - number of members
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_nmembers_f(type_id, num_members, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: num_members !number of fields in a compound datatype
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_norm_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_norm_f
-
-

PURPOSE

-
  Retrieves mantissa normalization of a floating-point
-  datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  norm          - normalization types, valid values are:
-                    H5T_NORM_IMPLIED_F(0)
-                    H5T_NORM_MSBSET_F(1)
-                    H5T_NORM_NONE_F(2)
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_norm_f(type_id, norm, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: norm !mantissa normalization of a floating-point datatype
-                                         !Valid normalization types are:
-                                         !H5T_NORM_IMPLIED_F(0),MSB of mantissa is not
-                                         !stored, always 1,  H5T_NORM_MSBSET_F(1), MSB of
-                                         !mantissa is always 1, H5T_NORM_NONE_F(2)
-                                         !Mantissa is not normalize
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_offset_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_offset_f
-
-

PURPOSE

-
  Retrieves the bit offset of the first significant bit.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  offset        - offset value
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_offset_f(type_id, offset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(OUT) :: offset ! Datatype bit offset of the
-                                           ! first significant bit
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_order_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_order_f
-
-

PURPOSE

-
  Returns the byte order of an atomic datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  order         - byte order for the datatype, possible
-                  values are:
-                    H5T_ORDER_LE_F
-                    H5T_ORDER_BE_F
-                    H5T_ORDER_VAX_F (not implemented yet)
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_order_f(type_id, order, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-    INTEGER, INTENT(OUT) :: order
-                                    ! Datatype byte order, possible values are:
-                                    ! H5T_ORDER_LE_F
-                                    ! H5T_ORDER_BE_F
-                                    ! H5T_ORDER_VAX_F
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- -

h5tget_pad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_pad_f
-
-

PURPOSE

-
  Retrieves the padding type of the least and
-  most          -significant bit padding.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  lsbpad        - least-significant bit padding type
-  msbpad        - most-significant bit padding type
-                  Possible values of padding type are:
-                    H5T_PAD_ERROR_F      = -1
-                    H5T_PAD_ZERO_F = 0
-                    H5T_PAD_ONE_F = 1
-                    H5T_PAD_BACKGROUND_F = 2
-                    H5T_PAD_NPAD_F      = 3
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_pad_f(type_id, lsbpad, msbpad, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: lsbpad ! padding type of the
-                                           ! least significant bit
-            INTEGER, INTENT(OUT) :: msbpad ! padding type of the
-                                           ! most significant bit
-                                           ! Possible values of padding type are:
-                                           ! H5T__PAD_ZERO_F = 0
-                                           ! H5T__PAD_ONE_F = 1
-                                           ! H5T__PAD_BACKGROUND_F = 2
-                                           ! H5T_PAD_ERROR_F      = -1
-                                           ! H5T_PAD_NPAD_F      = 3
-
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_precision_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_precision_f
-
-

PURPOSE

-
  Returns the precision of an atomic datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  precision     - precision of the datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_precision_f(type_id, precision, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(OUT) :: precision ! Datatype precision
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_sign_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_sign_f
-
-

PURPOSE

-
  Retrieves the sign type for an integer type.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  sign          - sign type
-                  Possible values are:
-                    - Unsigned integer type 
-                        H5T_SGN_NONE_F = 0
-                    - Two's complement signed integer type
-                        H5T_SGN_2_F = 1
-                    - error value: H5T_SGN_ERROR_F=-1
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_sign_f(type_id, sign, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: sign ! sign type for an integer type
-                                         !possible values are:
-                                         !Unsigned integer type H5T_SGN_NONE_F = 0
-                                         !Two's complement signed integer type
-                                         !H5T_SGN_2_F = 1
-                                         !or error value: H5T_SGN_ERROR_F=-1
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_size_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_size_f
-
-

PURPOSE

-
  Returns the size of a datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  size          - datatype size
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_size_f(type_id, size, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(OUT) :: size ! Datatype size
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_strpad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_strpad_f
-
-

PURPOSE

-
  Retrieves the storage mechanism for a string datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  strpad        - storage method for a string datatype
-                  Possible values are:
-                    H5T_STR_NULLTERM_F,
-                    H5T_STR_NULLPAD_F,
-                    H5T_STR_SPACEPAD_F
-                    H5T_STR_ERROR_F
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_strpad_f(type_id, strpad, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: strpad
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_super_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_super_f
-
-

PURPOSE

-
  Returns the base datatype from which a datatype is derived.
-
-

INPUTS

-
  type_id       - datatype identifier
-
-

OUTPUTS

-
  base_type_id          - identifier of the base type
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_super_f(type_id, base_type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! datatype identifier
-            INTEGER(HID_T), INTENT(OUT) :: base_type_id ! identifier of the datatype
-                                           ! from which datatype (type_id) was derived
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tget_tag_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tget_tag_f
-
-

PURPOSE

-
  Gets the tag associated with an opaque datatype.
-
-

INPUTS

-
  type_id       - identifier for opaque datatype
-
-

OUTPUTS

-
  tag           - unique ASCII string associated with opaque
-                  datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tget_tag_f(type_id, tag,taglen, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(OUT) :: tag  ! Unique ASCII string with which
-                                                  !  the opaque datatype is to be tagged
-            INTEGER, INTENT(OUT) :: taglen        ! Length of tag
-            INTEGER(SIZE_T)      :: tag_size      ! Declared character length of tab 
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tinsert_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tinsert_f
-
-

PURPOSE

-
  Adds a new member to a compound datatype.
-
-

INPUTS

-
  type_id       - compound dattype identifier
-  name          - name of the field to insert
-  offset        - start of the member in an instance of
-                  the compound datatype
-  field_id      - datatype identifier of the field to insert
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tinsert_f(type_id,  name, offset, field_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(IN) :: name !Name of the field to insert
-            INTEGER(SIZE_T), INTENT(IN) :: offset !start of the member in an instance of
-                                                   !the compound datatype
-            INTEGER(HID_T), INTENT(IN) :: field_id !datatype identifier of the new member
-
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tis_variable_str_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tis_variable_str_f
-
-

PURPOSE

-
  Determines whether a dattype is a variable string.
-
-

INPUTS

-
  type_id       - datartpe identifier
-
-

OUTPUTS

-
  status        - flag to indicate if datatype
-                  is a variable string
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5tis_variable_str_f(type_id, status, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id  ! Datatype identifier
-            LOGICAL, INTENT(OUT) :: status      ! Flag, idicates if datatype
-                                                ! is a variable string or not ( TRUE or
-                                                ! FALSE)
-            INTEGER, INTENT(OUT) :: hdferr      ! Error code
-
- -
- -

h5topen_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5topen_f
-
-

PURPOSE

-
  Opens named datatype.
-
-

INPUTS

-
  loc_id        - location identifier
-  name          - a datatype name
-
-

OUTPUTS

-
  type_id       - datatype identifier
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

OPTIONAL PARAMETERS

-
  tapl_id       - datatype access property list identifier.
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-  Added optional parameter 'tapl_id' for compatability
-  with H5Topen2. April 9, 2009.
-
-

SOURCE

-
  SUBROUTINE h5topen_f(loc_id, name, type_id, hdferr, tapl_id)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: loc_id  ! File or group identifier
-    CHARACTER(LEN=*), INTENT(IN) :: name ! Datatype name within file or group
-    INTEGER(HID_T), INTENT(OUT) :: type_id  ! Datatype identifier
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-    INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! datatype access property list identifier
-
- -
- -

h5tpack_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tpack_f
-
-

PURPOSE

-
  Recursively removes padding from within a compound datatype.
-
-

INPUTS

-
  type_id       - compound datatype identifier
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tpack_f(type_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_cset_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_cset_f
-
-

PURPOSE

-
  Sets character set to be used.
-
-

INPUTS

-
  type_id       - datatype identifier
-  cset          - character set type of a string datatype
-                    Possible values are:
-                     H5T_CSET_ASCII_F = 0
-                     H5T_CSET_UTF8_F
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_cset_f(type_id, cset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: cset !character set type of a string datatype
-                                           ! Possible values of padding type are:
-                                           ! H5T_CSET_ASCII_F = 0
-                                           ! H5T_CSET_UTF8_F
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_ebias_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_ebias_f
-
-

PURPOSE

-
  Sets the exponent bias of a floating-point type.
-
-

INPUTS

-
  type_id       - datatype identifier
-  ebias         - datatype exponent bias
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_ebias_f(type_id, ebias, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(IN) :: ebias !Datatype exponent bias of a floating-point type
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_fields_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_fields_f
-
-

PURPOSE

-
  Sets locations and sizes of floating point bit fields.
-
-

INPUTS

-
  type_id       - datatype identifier
-  spos          - sign bit-position
-  epos          - exponent bit-position
-  esize         - size of exponent in bits
-  mpos          - mantissa position
-  msize         - size of mantissa in bits
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(IN) :: spos   ! sign bit-position
-            INTEGER(SIZE_T), INTENT(IN) :: epos   ! exponent bit-position
-            INTEGER(SIZE_T), INTENT(IN) :: esize  ! size of exponent in bits
-            INTEGER(SIZE_T), INTENT(IN) :: mpos   ! mantissa bit-position
-            INTEGER(SIZE_T), INTENT(IN) :: msize  ! size of mantissa in bits
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_inpad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_inpad_f
-
-

PURPOSE

-
  Fills unused internal floating point bits.
-
-

INPUTS

-
  type_id       - datatype identifier
-  padtype       - padding type for unused bits
-                  Possible values of padding type are:
-                    H5T_PAD_ZERO_F = 0
-                    H5T_PAD_ONE_F = 1
-                    H5T_PAD_BACKGROUND_F = 2
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_inpad_f(type_id, padtype, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: padtype ! padding type for unused bits
-                                           ! in floating-point datatypes.
-                                           ! Possible values of padding type are:
-                                           ! H5T__PAD_ZERO_F = 0
-                                           ! H5T__PAD_ONE_F = 1
-                                           ! H5T__PAD_BACKGROUND_F = 2
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_norm_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_norm_f
-
-

PURPOSE

-
  Sets the mantissa normalization of a floating-point datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  norm          - normalization types, valid values are:
-                    H5T_NORM_IMPLIED_F(0)
-                    H5T_NORM_MSBSET_F(1)
-                    H5T_NORM_NONE_F(2)
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_norm_f(type_id, norm, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: norm !mantissa normalization of a floating-point datatype
-                                         !Valid normalization types are:
-                                         !H5T_NORM_IMPLIED_F(0),MSB of mantissa is not
-                                         !stored, always 1,  H5T_NORM_MSBSET_F(1), MSB of
-                                         !mantissa is always 1, H5T_NORM_NONE_F(2)
-                                         !Mantissa is not normalize
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_offset_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_offset_f
-
-

PURPOSE

-
  Sets the bit offset of the first significant bit.
-
-

INPUTS

-
  type_id       - datatype identifier
-  offset        - offset value
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_offset_f(type_id, offset, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(IN) :: offset ! Datatype bit offset of the
-                                           ! first significant bit
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_order_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_order_f
-
-

PURPOSE

-
  Sets the byte ordering of an atomic datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  order         - datatype byte order Possible values are:
-                    H5T_ORDER_LE_F
-                    H5T_ORDER_BE_F
-                    H5T_ORDER_VAX_F (not implemented yet)
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_order_f(type_id, order, hdferr)
-    IMPLICIT NONE
-    INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-    INTEGER, INTENT(IN) :: order   ! Datatype byte order, possible values
-                                   ! are:
-                                   ! H5T_ORDER_LE_F
-                                   ! H5T_ORDER_BE_F
-                                   ! H5T_ORDER_VAX_F
-    INTEGER, INTENT(OUT) :: hdferr ! Error code
-
- -
- -

h5tset_pad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_pad_f
-
-

PURPOSE

-
  Sets the least and most-significant bits padding types.
-
-

INPUTS

-
  type_id       - datatype identifier
-  lsbpad        - least-significant bit padding type
-  msbpad        - most-significant bit padding type
-                  Possible values of padding type are:
-                    H5T_PAD_ERROR_F      = -1
-                    H5T_PAD_ZERO_F = 0
-                    H5T_PAD_ONE_F = 1
-                    H5T_PAD_BACKGROUND_F = 2
-                    H5T_PAD_NPAD_F      = 3
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_pad_f(type_id, lsbpad, msbpad, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: lsbpad ! padding type of the
-                                           ! least significant bit
-            INTEGER, INTENT(IN) :: msbpad ! padding type of the
-                                           ! most significant bit
-                                           ! Possible values of padding type are:
-                                           ! H5T_PAD_ZERO_F = 0
-                                           ! H5T_PAD_ONE_F = 1
-                                           ! H5T_PAD_BACKGROUND_F = 2
-                                           ! H5T_PAD_ERROR_F      = -1
-                                           ! H5T_PAD_NPAD_F      = 3
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_precision_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_precision_f
-
-

PURPOSE

-
  Sets the precision of an atomic datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  precision     - datatype precision
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_precision_f(type_id, precision, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(IN) :: precision ! Datatype precision
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_sign_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_sign_f
-
-

PURPOSE

-
  Sets the sign proprety for an integer type.
-
-

INPUTS

-
  type_id       - datatype identifier
-  sign          - sign type
-                  Possible values are:
-                    - Unsigned integer type 
-                        H5T_SGN_NONE_F = 0
-                    - Two's complement signed integer type
-                        H5T_SGN_2_F = 1
-                    - error value: H5T_SGN_ERROR_F=-1
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_sign_f(type_id, sign, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: sign !sign type for an integer type
-                                         !possible values are:
-                                         !Unsigned integer type H5T_SGN_NONE_F = 0
-                                         !Two's complement signed integer type
-                                         !H5T_SGN_2_F = 1
-                                         !or error value: H5T_SGN_ERROR_F=-1
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_size_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_size_f
-
-

PURPOSE

-
  Sets the total size for an atomic datatype.
-
-

INPUTS

-
  type_id       - datatype identifier
-  size          - size of the datatype
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_size_f(type_id, size, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER(SIZE_T), INTENT(IN) :: size ! Datatype size
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_strpad_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_strpad_f
-
-

PURPOSE

-
  Defines the storage mechanism for character strings.
-
-

INPUTS

-
  type_id       - datatype identifier
-  strpad        - storage method for a string datatype
-                  Possible values are:
-                    H5T_STR_NULLTERM_F,
-                    H5T_STR_NULLPAD_F,
-                    H5T_STR_SPACEPAD_F
-                    H5T_STR_ERROR_F
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_strpad_f(type_id, strpad, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            INTEGER, INTENT(IN) :: strpad ! string padding method for a string datatype
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tset_tag_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tset_tag_f
-
-

PURPOSE

-
  Tags an opaque datatype.
-
-

INPUTS

-
  type_id       - identifier for opaque datatype
-  tag           - unique ASCII string with which the opaque
-                  datatype is to be tagged.
-
-

OUTPUTS

-
  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  March 7, 2001
-
-

SOURCE

-
  SUBROUTINE h5tset_tag_f(type_id, tag, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier
-            CHARACTER(LEN=*), INTENT(IN) :: tag !Unique ASCII string with which
-                                                !the opaque datatype is to be tagged
-            INTEGER, INTENT(OUT) :: hdferr        ! Error code
-
- -
- -

h5tvlen_create_f

- -

[ Top ] [ H5T ] [ Subroutines ]

-

NAME

-
  h5tvlen_create_f
-
-

PURPOSE

-
  Creates a new variable-length datatype.
-
-

INPUTS

-
  type_id       - identifier iof base datatype
-
-

OUTPUTS

-
  vltype_id     - identifier for VL datatype
-  hdferr        - Returns 0 if successful and -1 if fails
-
-

AUTHOR

-
  Elena Pourmal
-  Wednesday, October 23, 2002
-
-

NOTES

-
  Only basic Fortran base datatypes are supported
-
-

SOURCE

-
  SUBROUTINE h5tvlen_create_f(type_id, vltype_id, hdferr)
-            IMPLICIT NONE
-            INTEGER(HID_T), INTENT(IN)  :: type_id    ! Datatype identifier
-            INTEGER(HID_T), INTENT(OUT) :: vltype_id  ! VL datatype identifier
-            INTEGER, INTENT(OUT) :: hdferr            ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Zf_c.html b/fortran/doc/DevelGuide/src/H5Zf_c.html deleted file mode 100644 index 2973548..0000000 --- a/fortran/doc/DevelGuide/src/H5Zf_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5Zf.c - - - - - -
-
- -

H5Zf

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   This file contains C stubs for H5Z Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5Zff_f90.html b/fortran/doc/DevelGuide/src/H5Zff_f90.html deleted file mode 100644 index 8ccd0ae..0000000 --- a/fortran/doc/DevelGuide/src/H5Zff_f90.html +++ /dev/null @@ -1,173 +0,0 @@ - - - - - - - -./src/H5Zff.f90 - - - - - -
-
- -

H5Z

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5Z
-
-

PURPOSE

-
  This file contains Fortran interfaces for H5Z functions. It includes
-  all the functions that are independent on whether the Fortran 2003 functions
-  are enabled or disabled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new H5Z function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5zfilter_avail_f

- -

[ Top ] [ H5Z ] [ Subroutines ]

-

NAME

-
  h5zfilter_avail_f
-
-

PURPOSE

-
  Queries if filter is available
-
-

INPUTS

-
  filter        - filter
-
-

OUTPUTS

-
  status        - status; .TRUE. if filter is available,
-                  .FALSE. otherwise
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5zfilter_avail_f(filter, status, hdferr)
-    IMPLICIT NONE
-    INTEGER, INTENT(IN)  :: filter      ! Filter; may be one of the following:
-                                        !   H5Z_FILTER_DEFLATE_F
-                                        !   H5Z_FILTER_SZIP_F
-                                        !   H5Z_FILTER_NBIT_F
-                                        !   H5Z_FILTER_SCALEOFFSET_F
-                                        !   H5Z_FILTER_SHUFFLE_F
-                                        !   H5Z_FILTER_FLETCHER32_F
-    LOGICAL, INTENT(OUT) :: status      ! Flag, idicates if filter
-                                        ! is availble  not ( TRUE or
-                                        ! FALSE)
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code
-
- -
- -

h5zget_filter_info_f

- -

[ Top ] [ H5Z ] [ Subroutines ]

-

NAME

-
  h5zget_filter_info_f
-
-

PURPOSE

-
  Queries if filter has its encoder and/or decoder
-  available
-
-

INPUTS

-
  filter        - filter
-
-

OUTPUTS

-
  config_flags  - Bit vector possibly containing the
-                  following values:
-                     H5Z_FILTER_ENCODE_ENABLED_F
-                     H5Z_FILTER_DECODE_ENABLED_F
-  hdferr:       - error code
-                   Success:  0
-                   Failure: -1
-
-

AUTHOR

-
  Nat Furrer and James Laird
-  June 16, 2004
-
-

SOURCE

-
  SUBROUTINE h5zget_filter_info_f(filter, config_flags, hdferr)
-    IMPLICIT NONE
-    INTEGER, INTENT(IN)  :: filter      ! Filter; may be one of the following:
-                                        !   H5Z_FILTER_DEFLATE_F
-                                        !   H5Z_FILTER_SZIP_F
-                                        !   H5Z_FILTER_NBIT_F
-                                        !   H5Z_FILTER_SCALEOFFSET_F
-                                        !   H5Z_FILTER_SHUFFLE_F
-                                        !   H5Z_FILTER_FLETCHER32_F
-    INTEGER, INTENT(OUT) :: config_flags! Flag, indicates if filter
-                                        ! has its encoder and/or decoder
-                                        ! available
-    INTEGER, INTENT(OUT) :: hdferr      ! Error code
-
- -
- -

h5zunregister_f

- -

[ Top ] [ H5Z ] [ Subroutines ]

-

NAME

-
  h5zunregister_f
-
-

PURPOSE

-
  Unregisters specified filetr
-
-

INPUTS

-
  filter - filter; may have one of the following values:
-            H5Z_FILTER_DEFLATE_F
-            H5Z_FILTER_SZIP_F
-            H5Z_FILTER_NBIT_F
-            H5Z_FILTER_SCALEOFFSET_F
-            H5Z_FILTER_SHUFFLE_F
-            H5Z_FILTER_FLETCHER32_F
-
-

OUTPUTS

-
  hdferr - error code
-            Success:  0
-            Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  March 12, 2003
-
-

SOURCE

-
  SUBROUTINE h5zunregister_f(filter, hdferr)
-    IMPLICIT NONE
-    INTEGER, INTENT(IN)  :: filter
-    INTEGER, INTENT(OUT) :: hdferr  ! Error code
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceExclude_f90.html b/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceExclude_f90.html deleted file mode 100644 index 4e51e7f..0000000 --- a/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceExclude_f90.html +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - -./src/H5_DBLE_InterfaceExclude.f90 - - - - - -
-
- -

src/H5_DBLE_InterfaceExclude.f90

- -

[ Top ] [ Modules ]

-

NAME

-
   H5_DBLE_INTERFACE
-
-

FUNCTION

-
   This module is used for when the default REAL is of type DOUBLE PRECISION.
-   We do not include the double precision interfaces if the defaut REAL is
-   DOUBLE PRECISION since this would lead to a non-unique conflict with the
-   generic interfaces declared as REAL and those declared as DOUBLE PRECISION.
-
-

NOTES

-
   Empty module.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceInclude_f90.html b/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceInclude_f90.html deleted file mode 100644 index 5a71d52..0000000 --- a/fortran/doc/DevelGuide/src/H5_DBLE_InterfaceInclude_f90.html +++ /dev/null @@ -1,54 +0,0 @@ - - - - - - - -./src/H5_DBLE_InterfaceInclude.f90 - - - - - -
-
- -

src/H5_DBLE_InterfaceInclude.f90

- -

[ Top ] [ Modules ]

-

NAME

-
   H5_DBLE_INTERFACE
-
-

FUNCTION

-
   This module is used for when the default REAL is not of the type DOUBLE PRECISION.
-   We only do not include the double precision interfaces if the defaut REAL is
-   DOUBLE PRECISION since this would lead to a non-unique conflict with the
-   generic interfaces declared as REAL. Otherwise it is okay to include the interfaces.
-
-

NOTES

-
   This module contains all the DOUBLE PRECISION interfaces and corresponding subroutines
-   from the HDF function catagory H5A, H5D and H5P.
-
-

AUTHOR

-
  M. Scot Breitenfeld
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_f_c.html b/fortran/doc/DevelGuide/src/H5_f_c.html deleted file mode 100644 index 2bdbce1..0000000 --- a/fortran/doc/DevelGuide/src/H5_f_c.html +++ /dev/null @@ -1,41 +0,0 @@ - - - - - - - -./src/H5_f.c - - - - - -
-
- -

fortran/src/H5_f.c

- -

[ Top ] [ Modules ]

-

FUNCTION

-
   This file contains C stubs for H5 Fortran APIs
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_ff_F03_f90.html b/fortran/doc/DevelGuide/src/H5_ff_F03_f90.html deleted file mode 100644 index 17f07c1..0000000 --- a/fortran/doc/DevelGuide/src/H5_ff_F03_f90.html +++ /dev/null @@ -1,83 +0,0 @@ - - - - - - - -./src/H5_ff_F03.f90 - - - - - -
-
- -

H5LIB_PROVISIONAL

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5LIB_PROVISIONAL
-
-

PURPOSE

-
  This file contains helper functions for Fortran 2003 features and is
-  only compiled when Fortran 2003 features are enabled, otherwise
-  the file H5_ff_F90.f90 is compiled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5offsetof

- -

[ Top ] [ H5LIB_PROVISIONAL ] [ Functions ]

-

NAME

-
  h5offsetof
-
-

PURPOSE

-
  Computes the offset in memory
-
-

INPUTS

-
  start - starting pointer address
-  end   - ending pointer address
-
-

OUTPUTS

-
  offset - offset
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  Augest 25, 2008
-
-

SOURCE

-
  FUNCTION h5offsetof(start,end) RESULT(offset)
-    USE, INTRINSIC :: ISO_C_BINDING
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER(SIZE_T) :: offset
-    TYPE(C_PTR), VALUE, INTENT(IN) :: start, end
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_ff_F90_f90.html b/fortran/doc/DevelGuide/src/H5_ff_F90_f90.html deleted file mode 100644 index c310ef2..0000000 --- a/fortran/doc/DevelGuide/src/H5_ff_F90_f90.html +++ /dev/null @@ -1,48 +0,0 @@ - - - - - - - -./src/H5_ff_F90.f90 - - - - - -
-
- -

H5LIB_PROVISIONAL (F90)

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5LIB_PROVISIONAL
-
-

FILE

-
  fortran/src/H5_ff_F90.f90
-
-

PURPOSE

-
  This file is a dummy module for when Fortran 2003 features are not enabled.
-  It is compiled in place of H5_ff_F03.f90 and is empty.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5_ff_f90.html b/fortran/doc/DevelGuide/src/H5_ff_f90.html deleted file mode 100644 index 021c7c5..0000000 --- a/fortran/doc/DevelGuide/src/H5_ff_f90.html +++ /dev/null @@ -1,269 +0,0 @@ - - - - - - - -./src/H5_ff.f90 - - - - - -
-
- -

H5LIB

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5LIB
-
-

PURPOSE

-
  This module provides fortran specific helper functions for the HDF library
-
-

USES

-
  H5LIB_PROVISIONAL - This module provides helper functions for Fortran 2003
-                      only features. If Fortran 2003 functions are enabled then
-                      H5_ff_F03.f90 is compiled, else H5_ff_F90.f90,
-                      which is just a place holder blank module, is compiled.
-
-

NOTES

-
                         *** IMPORTANT ***
-  If you add a new function you must add the function name to the
-  Windows dll file 'hdf5_fortrandll.def' in the fortran/src directory.
-  This is needed for Windows based operating systems.
-
- -
- -

h5check_version_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5check_version_f
-
-

PURPOSE

-
  Verifies that library versions are consistent.
-
-

INPUTS

-
  majnum               - major version of the library
-  minum                - minor version of the library
-  relnum               - release version of the library
-
-

OUTPUTS

-
  error                - error code
-                          Success:  0
-                          Failure:  application aborts
-
-

AUTHOR

-
  Elena Pourmal
-  September 24, 2002
-
-

SOURCE

-
  SUBROUTINE h5check_version_f(majnum, minnum, relnum, error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(IN) :: majnum, minnum, relnum
-    INTEGER, INTENT(OUT) :: error
-
- -
- -

h5close_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5close_f
-
-

PURPOSE

-
  Closes the HDF5 library and Fortran90 interface.
-
-

OUTPUTS

-
  error - error code
-            Success:  0
-            Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5close_f(error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: error
-
- -
- -

h5dont_atexit_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5dont_atexit_f
-
-

PURPOSE

-
  Instructs library not to install atexit cleanup routine.
-
-

OUTPUTS

-
  error  - error code
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  September 24, 2002
-
-

SOURCE

-
  SUBROUTINE h5dont_atexit_f(error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: error
-
- -
- -

h5garbage_collect_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5garbage_collect_f
-
-

PURPOSE

-
  Garbage collects on all free-lists of all types.
-
-

OUTPUTS

-
  error  - error code
-             Success:  0
-             Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  September 24, 2002
-
-

SOURCE

-
  SUBROUTINE h5garbage_collect_f(error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: error
-
- -
- -

h5get_libversion_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5get_libversion_f
-
-

PURPOSE

-
  Returns the HDF5 LIbrary release number
-
-

OUTPUTS

-
  majnum               - major version of the library
-  minum                - minor version of the library
-  relnum               - release version of the library
-  error                - error code
-                           Success:  0
-                           Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  September 24, 2002
-
-

SOURCE

-
  SUBROUTINE h5get_libversion_f(majnum, minnum, relnum, error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: majnum, minnum, relnum, error
-
- -
- -

h5kind_to_type

- -

[ Top ] [ H5LIB ] [ Functions ]

-

NAME

-
  h5kind_to_type
-
-

PURPOSE

-
  Converts the KIND to the correct HDF type
-
-

INPUTS

-
  kind    - Fortran KIND parameter
-  flag    - whether KIND is of type INTEGER or REAL:
-              H5_INTEGER_KIND - integer
-              H5_REAL_KIND    - real
-
-

OUTPUTS

-
  h5_type - returns the type
-
-

AUTHOR

-
  M. Scot Breitenfeld
-  Augest 25, 2008
-
-

SOURCE

-
  INTEGER(HID_T) FUNCTION h5kind_to_type(kind, flag) RESULT(h5_type)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(IN) :: kind
-    INTEGER, INTENT(IN) :: flag
-
- -
- -

h5open_f

- -

[ Top ] [ H5LIB ] [ Subroutines ]

-

NAME

-
  h5open_f
-
-

PURPOSE

-
  Initializes the HDF5 library and Fortran90 interface.
-
-

OUTPUTS

-
  error - error code
-            Success:  0
-            Failure: -1
-
-

AUTHOR

-
  Elena Pourmal
-  August 12, 1999
-
-

HISTORY

-
  Explicit Fortran interfaces were added for
-  called C functions (it is needed for Windows
-  port).  February 28, 2001
-
-

SOURCE

-
  SUBROUTINE h5open_f(error)
-    USE H5GLOBAL
-    IMPLICIT NONE
-    INTEGER, INTENT(OUT) :: error
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5f90global_f90.html b/fortran/doc/DevelGuide/src/H5f90global_f90.html deleted file mode 100644 index 587b6d0..0000000 --- a/fortran/doc/DevelGuide/src/H5f90global_f90.html +++ /dev/null @@ -1,61 +0,0 @@ - - - - - - - -./src/H5f90global.f90 - - - - - -
-
- -

H5GLOBAL

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE H5GLOBAL
-
-

FILE

-
  src/fortran/H5f90global.f90
-
-

PURPOSE

-
  This module is used to pass C stubs for H5 Fortran APIs. The C stubs are
-  packed into arrays in H5_f.c and these arrays are then passed to Fortran.
-  This module then uses EQUIVALENCE to assign elements of the arrays to
-  Fortran equivalent C stubs.
-
-

NOTES

-
  The size of the C arrays in H5_f.c has to match the values of the variables
-  declared as PARAMETER, hence if the size of an array in H5_f.c is changed
-  then the PARAMETER of that corresponding array in Fortran must also be changed.
-
-

USES

-
  H5FORTRAN_TYPES       - This module is generated at run time. See
-
-

AUTHOR

-
  Elena Pourmal
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5f90kit_c.html b/fortran/doc/DevelGuide/src/H5f90kit_c.html deleted file mode 100644 index 1329a87..0000000 --- a/fortran/doc/DevelGuide/src/H5f90kit_c.html +++ /dev/null @@ -1,44 +0,0 @@ - - - - - - - -./src/H5f90kit.c - - - - - -
-
- -

H5f90kit

- -

[ Top ] [ Modules ]

-

PURPOSE

-
   Routines from HDF4 to deal with C-FORTRAN issues:
-
-   HD5f2cstring   -- convert a Fortran string to a C string
-   HD5packFstring -- convert a C string into a Fortran string
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5match_types_c.html b/fortran/doc/DevelGuide/src/H5match_types_c.html deleted file mode 100644 index 083319a..0000000 --- a/fortran/doc/DevelGuide/src/H5match_types_c.html +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - -./src/H5match_types.c - - - - - -
-
- -

H5match_types

- -

[ Top ] [ Procedures ]

-

NAME

-
  Executable: H5match_types
-
-

FILE

-
  fortran/src/H5match_types.c
-
-

PURPOSE

-
  C Program to match C types to Fortran types.
-  Creates the files H5f90i_gen.h for the C code and
-  H5fortran_types.f90 for the Fortran code.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html b/fortran/doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html deleted file mode 100644 index 3494db0..0000000 --- a/fortran/doc/DevelGuide/src/H5test_kind_SIZEOF_f90.html +++ /dev/null @@ -1,61 +0,0 @@ - - - - - - - -./src/H5test_kind_SIZEOF.f90 - - - - - -
-
- -

H5test_kind_SIZEOF

- -

[ Top ] [ Procedures ]

-

NAME

-
  Executable: H5test_kind
-
-

FILE

-
  fortran/src/H5test_kind_SIZEOF.f90
-
-

PURPOSE

-
  This stand alone program is used at build time to generate the program
-  H5fortran_detect.f90. It cycles through all the available KIND parameters for
-  integers and reals. The appropriate program and subroutines are then generated
-  depending on which of the KIND values are found.
-
-

NOTES

-
  This program is used in place of H5test_kind.f90 when the Fortran intrinsic
-  function SIZEOF is available. It generates code that makes use of SIZEOF in
-  H5fortran_detect.f90 which is a portable solution.
-
-  The availability of SIZEOF is checked at configure time and the TRUE/FALSE
-  condition is set in the configure variable "FORTRAN_HAVE_SIZEOF".
-
-

AUTHOR

-
  M. Scot Breitenfeld
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/H5test_kind_f90.html b/fortran/doc/DevelGuide/src/H5test_kind_f90.html deleted file mode 100644 index c08e488..0000000 --- a/fortran/doc/DevelGuide/src/H5test_kind_f90.html +++ /dev/null @@ -1,62 +0,0 @@ - - - - - - - -./src/H5test_kind.f90 - - - - - -
-
- -

H5test_kind

- -

[ Top ] [ Procedures ]

-

NAME

-
  Executable: H5test_kind
-
-

FILE

-
  fortran/src/H5test_kind.f90
-
-

PURPOSE

-
  This stand alone program is used at build time to generate the program
-  H5fortran_detect.f90. It cycles through all the available KIND parameters for
-  integers and reals. The appropriate program and subroutines are then generated
-  depending on which of the KIND values are found.
-
-

NOTES

-
  This program is depreciated in favor of H5test_kind_SIZEOF.f90 and is only
-  used when the Fortran intrinsic function SIZEOF is not available. It generates
-  code that does not make use of SIZEOF in H5fortran_detect.f90 which is less
-  portable in comparison to using SIZEOF.
-
-  The availability of SIZEOF is checked at configure time and the TRUE/FALSE
-  condition is set in the configure variable "FORTRAN_HAVE_SIZEOF".
-
-

AUTHOR

-
  Elena Pourma
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/HDF5_f90.html b/fortran/doc/DevelGuide/src/HDF5_f90.html deleted file mode 100644 index 1490c7c..0000000 --- a/fortran/doc/DevelGuide/src/HDF5_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./src/HDF5.f90 - - - - - -
-
- -

HDF5

- -

[ Top ] [ Modules ]

-

NAME

-
  MODULE HDF5
-
-

FILE

-
  src/fortran/src/HDF5.f90
-
-

PURPOSE

-
  This is the main module used for linking to the Fortran HDF library.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/src/HDF5mpio_f90.html b/fortran/doc/DevelGuide/src/HDF5mpio_f90.html deleted file mode 100644 index 9ef5f32..0000000 --- a/fortran/doc/DevelGuide/src/HDF5mpio_f90.html +++ /dev/null @@ -1,45 +0,0 @@ - - - - - - - -./src/HDF5mpio.f90 - - - - - -
-
- -

HDF5 (mpio)

- -

[ Top ] [ Modules ]

-

NAME

-
  HDF5
-
-

PURPOSE

-
  This is the main module used for linking to the Fortran parallel HDF library.
-  This file replaces HDF5.f90 when compiling the parallel library.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/fflush1_f90.html b/fortran/doc/DevelGuide/test/fflush1_f90.html deleted file mode 100644 index eaab841..0000000 --- a/fortran/doc/DevelGuide/test/fflush1_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/fflush1.f90 - - - - - -
-
- -

fortran/test/fflush1.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  FFLUSH1EXAMPLE
-
-

FUNCTION

-
  This is the first half of a two-part test that makes sure
-  that a file can be read after an application crashes as long
-  as the file was flushed first.  We simulate by exit the 
-  the program using stop statement
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/fflush2_f90.html b/fortran/doc/DevelGuide/test/fflush2_f90.html deleted file mode 100644 index 23b7797..0000000 --- a/fortran/doc/DevelGuide/test/fflush2_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/fflush2.f90 - - - - - -
-
- -

fortran/test/fflush2.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  fflush2.f90
-
-

FUNCTION

-
  This is the second half of a two-part test that makes sure
-  that a file can be read after an application crashes as long
-  as the file was flushed first.  This half tries to read the
-  file created by the first half.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/fortranlib_test_1_8_f90.html b/fortran/doc/DevelGuide/test/fortranlib_test_1_8_f90.html deleted file mode 100644 index 3ce387d..0000000 --- a/fortran/doc/DevelGuide/test/fortranlib_test_1_8_f90.html +++ /dev/null @@ -1,44 +0,0 @@ - - - - - - - -./test/fortranlib_test_1_8.f90 - - - - - -
-
- -

fortran/test/fortranlib_test_1_8.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  fortranlib_test_1_8.f90
-
-

FUNCTION

-
  Basic testing of Fortran API's introduced in 1.8 release.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/fortranlib_test_F03_f90.html b/fortran/doc/DevelGuide/test/fortranlib_test_F03_f90.html deleted file mode 100644 index 1a0c7be..0000000 --- a/fortran/doc/DevelGuide/test/fortranlib_test_F03_f90.html +++ /dev/null @@ -1,45 +0,0 @@ - - - - - - - -./test/fortranlib_test_F03.f90 - - - - - -
-
- -

fortran/test/fortranlib_test_F03.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  fortranlib_test_F03.f90
-
-

FUNCTION

-
  Basic testing of Fortran API's requiring Fortran 2003
-  compliance.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/fortranlib_test_f90.html b/fortran/doc/DevelGuide/test/fortranlib_test_f90.html deleted file mode 100644 index 29fb2f1..0000000 --- a/fortran/doc/DevelGuide/test/fortranlib_test_f90.html +++ /dev/null @@ -1,44 +0,0 @@ - - - - - - - -./test/fortranlib_test.f90 - - - - - -
-
- -

fortran/test/fortranlib_test.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  fortranlib_test.f90
-
-

FUNCTION

-
  Basic testing of Fortran API's functionality.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tF2003_f90.html b/fortran/doc/DevelGuide/test/tF2003_f90.html deleted file mode 100644 index 8101411..0000000 --- a/fortran/doc/DevelGuide/test/tF2003_f90.html +++ /dev/null @@ -1,53 +0,0 @@ - - - - - - - -./test/tF2003.f90 - - - - - -
-
- -

fortran/test/tF2003.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tF2003.f90
-
-

FUNCTION

-
  Test FORTRAN HDF5 APIs which are dependent on the FORTRAN 2003
-  features. Tests H5L, H5P, H5T APIs. 
-
-

USES

-
  liter_cb_mod, test_genprop_cls_cb1_mod
-
-

CONTAINS SUBROUTINES

-
  test_iter_group, test_create, test_genprop_class_callback,
-  test_array_compound_atomic, test_array_compound_array,
-  test_array_bkg 
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5A_1_8_f90.html b/fortran/doc/DevelGuide/test/tH5A_1_8_f90.html deleted file mode 100644 index c217d99..0000000 --- a/fortran/doc/DevelGuide/test/tH5A_1_8_f90.html +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - -./test/tH5A_1_8.f90 - - - - - -
-
- -

fortran/test/tH5A_1_8.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5A_1_8.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5A APIs introduced in 1.8.
-
-

CONTAINS SUBROUTINES

-
  attribute_test_1_8, test_attr_corder_create_compact, test_attr_null_space,
-  test_attr_create_by_name, test_attr_info_by_idx, attr_info_by_idx_check,
-  test_attr_shared_rename, test_attr_delete_by_idx, test_attr_shared_delete,
-  test_attr_dense_open, test_attr_dense_verify, test_attr_corder_create_basic,
-  test_attr_basic_write, test_attr_many, attr_open_check, 
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5A_f90.html b/fortran/doc/DevelGuide/test/tH5A_f90.html deleted file mode 100644 index 87c5a45..0000000 --- a/fortran/doc/DevelGuide/test/tH5A_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5A.f90 - - - - - -
-
- -

fortran/test/tH5A.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5A.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5A APIs.
-
-

CONTAINS SUBROUTINES

-
  attribute_test 
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5D_f90.html b/fortran/doc/DevelGuide/test/tH5D_f90.html deleted file mode 100644 index c840425..0000000 --- a/fortran/doc/DevelGuide/test/tH5D_f90.html +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - -./test/tH5D.f90 - - - - - -
-
- -

fortran/test/tH5D.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5D.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5D APIs.
-
-

NOTES

-
  Tests the H5D APIs functionalities of:
-   h5dcreate_f, h5dopen_f, h5dclose_f, h5dget_space_f, h5dget_type_f,
-   h5dread_f, and h5dwrite_f
-
-

CONTAINS SUBROUTINES

-
  datasettest, extenddsettest
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5E_f90.html b/fortran/doc/DevelGuide/test/tH5E_f90.html deleted file mode 100644 index 6a1ef56..0000000 --- a/fortran/doc/DevelGuide/test/tH5E_f90.html +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - -./test/tH5E.f90 - - - - - -
-
- -

fortran/test/tH5E.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5E.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5E APIs.
-
-

NOTES

-
  Tests the H5D APIs functionalities of:
-   h5eprint_f
-
-

CONTAINS SUBROUTINES

-
  error_report_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5F_f90.html b/fortran/doc/DevelGuide/test/tH5F_f90.html deleted file mode 100644 index d1aff59..0000000 --- a/fortran/doc/DevelGuide/test/tH5F_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5F.f90 - - - - - -
-
- -

fortran/test/tH5F.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5F.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5F APIs.
-
-

CONTAINS SUBROUTINES

-
  mountingtest, reopentest, plisttest, file_close, file_space
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5G_1_8_f90.html b/fortran/doc/DevelGuide/test/tH5G_1_8_f90.html deleted file mode 100644 index 81fdd3c..0000000 --- a/fortran/doc/DevelGuide/test/tH5G_1_8_f90.html +++ /dev/null @@ -1,49 +0,0 @@ - - - - - - - -./test/tH5G_1_8.f90 - - - - - -
-
- -

fortran/test/tH5G_1_8.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5G_1_8.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5G APIs introduced in 1.8.
-
-

CONTAINS SUBROUTINES

-
  group_test, group_info, timestamps, mklinks, test_move_preserves, lifecycle
-  cklinks, delete_by_idx, link_info_by_idx_check, test_lcpl, objcopy, 
-  lapl_nlinks
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5G_f90.html b/fortran/doc/DevelGuide/test/tH5G_f90.html deleted file mode 100644 index 6c60a3c..0000000 --- a/fortran/doc/DevelGuide/test/tH5G_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5G.f90 - - - - - -
-
- -

fortran/test/tH5G.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5G.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5G APIs.
-
-

CONTAINS SUBROUTINES

-
  group_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5I_f90.html b/fortran/doc/DevelGuide/test/tH5I_f90.html deleted file mode 100644 index 52e21fc..0000000 --- a/fortran/doc/DevelGuide/test/tH5I_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5I.f90 - - - - - -
-
- -

fortran/test/tH5I.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5I.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5I APIs.
-
-

CONTAINS SUBROUTINES

-
  identifier_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5O_f90.html b/fortran/doc/DevelGuide/test/tH5O_f90.html deleted file mode 100644 index a128da5..0000000 --- a/fortran/doc/DevelGuide/test/tH5O_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5O.f90 - - - - - -
-
- -

fortran/test/tH5O.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5O.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5O APIs.
-
-

CONTAINS SUBROUTINES

-
  test_h5o, test_h5o_link, test_h5o_plist
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5P_f90.html b/fortran/doc/DevelGuide/test/tH5P_f90.html deleted file mode 100644 index edc0787..0000000 --- a/fortran/doc/DevelGuide/test/tH5P_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5P.f90 - - - - - -
-
- -

fortran/test/tH5P.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5P.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5P APIs.
-
-

CONTAINS SUBROUTINES

-
  external_test, multi_file_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5R_f90.html b/fortran/doc/DevelGuide/test/tH5R_f90.html deleted file mode 100644 index fd44062..0000000 --- a/fortran/doc/DevelGuide/test/tH5R_f90.html +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - -./test/tH5R.f90 - - - - - -
-
- -

fortran/test/tH5R.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5R.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5R, Reference Interface, APIs.
-
-

NOTES

-
  Tests h5rcreate_f, h5rdereference_f, h5rget_name_f 
-  and H5Rget_object_type functions
-
-

CONTAINS SUBROUTINES

-
  refobjtest, refregtest
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5S_f90.html b/fortran/doc/DevelGuide/test/tH5S_f90.html deleted file mode 100644 index 5879d28..0000000 --- a/fortran/doc/DevelGuide/test/tH5S_f90.html +++ /dev/null @@ -1,54 +0,0 @@ - - - - - - - -./test/tH5S.f90 - - - - - -
-
- -

fortran/test/tH5S.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5S.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5S, Dataspace Interface, APIs.
-
-

NOTES

-
  Tests the following functionalities:
-   h5screate_f, h5scopy_f, h5screate_simple_f, h5sis_simple_f,
-   h5sget_simple_extent_dims_f,h5sget_simple_extent_ndims_f
-   h5sget_simple_extent_npoints_f, h5sget_simple_extent_type_f,
-   h5sextent_copy_f, h5sset_extent_simple_f, h5sset_extent_none_f
-
-

CONTAINS SUBROUTINES

-
  dataspace_basic_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5Sselect_f90.html b/fortran/doc/DevelGuide/test/tH5Sselect_f90.html deleted file mode 100644 index e8eaa73..0000000 --- a/fortran/doc/DevelGuide/test/tH5Sselect_f90.html +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - -./test/tH5Sselect.f90 - - - - - -
-
- -

fortran/test/tH5Sselect.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5Sselect.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5S, Selection-related Dataspace Interface, APIs.
-
-

NOTES

-
  Tests the following functionalities:
-    h5sget_select_npoints_f, h5sselect_elements_f, h5sselect_all_f,
-    h5sselect_none_f, h5sselect_valid_f, h5sselect_hyperslab_f,
-    h5sget_select_bounds_f, h5sget_select_elem_pointlist_f,
-    h5sget_select_elem_npoints_f, h5sget_select_hyper_blocklist_f,
-    h5sget_select_hyper_nblocks_f, h5sget_select_npoints_f   
-
-

CONTAINS SUBROUTINES

-
  test_select_hyperslab, test_select_element, test_basic_select,
-  test_select_point, test_select_combine, test_select_bounds
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5T_f90.html b/fortran/doc/DevelGuide/test/tH5T_f90.html deleted file mode 100644 index 35006b3..0000000 --- a/fortran/doc/DevelGuide/test/tH5T_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5T.f90 - - - - - -
-
- -

fortran/test/tH5T.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5T.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5T APIs.
-
-

CONTAINS SUBROUTINES

-
  compoundtest, basic_data_type_test, enumtest, test_derived_flt
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5VL_f90.html b/fortran/doc/DevelGuide/test/tH5VL_f90.html deleted file mode 100644 index a34a01d..0000000 --- a/fortran/doc/DevelGuide/test/tH5VL_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5VL.f90 - - - - - -
-
- -

fortran/test/tH5VL.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5VL.f90
-
-

FUNCTION

-
  Basic testing of Fortran Variable_length datatypes APIs.
-
-

CONTAINS SUBROUTINES

-
  vl_test_integer, vl_test_real, vl_test_string 
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tH5Z_f90.html b/fortran/doc/DevelGuide/test/tH5Z_f90.html deleted file mode 100644 index 94325b9..0000000 --- a/fortran/doc/DevelGuide/test/tH5Z_f90.html +++ /dev/null @@ -1,47 +0,0 @@ - - - - - - - -./test/tH5Z.f90 - - - - - -
-
- -

fortran/test/tH5Z.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tH5Z.f90
-
-

FUNCTION

-
  Basic testing of Fortran H5Z szip APIs.
-
-

CONTAINS SUBROUTINES

-
  filters_test, szip_test
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/t_c.html b/fortran/doc/DevelGuide/test/t_c.html deleted file mode 100644 index c9512a7..0000000 --- a/fortran/doc/DevelGuide/test/t_c.html +++ /dev/null @@ -1,44 +0,0 @@ - - - - - - - -./test/t.c - - - - - -
-
- -

fortran/test/tc.c

- -

[ Top ] [ Modules ]

-

NAME

-
   tc.c
-
-

FUNCTION

-
   This file contains C routines needed for the test programs.
-
- -
- - - diff --git a/fortran/doc/DevelGuide/test/tf_f90.html b/fortran/doc/DevelGuide/test/tf_f90.html deleted file mode 100644 index e3c51f4..0000000 --- a/fortran/doc/DevelGuide/test/tf_f90.html +++ /dev/null @@ -1,48 +0,0 @@ - - - - - - - -./test/tf.f90 - - - - - -
-
- -

fortran/test/tf.f90

- -

[ Top ] [ Modules ]

-

NAME

-
  tf.f90
-
-

FUNCTION

-
  Contains subroutines which are needed in all the hdf5 fortran tests
-
-

CONTAINS SUBROUTINES

-
  write_test_status, check, verify, verifyLogical, verifyString, h5_fixname_f,
-  h5_cleanup_f, h5_exit_f, h5_env_nocleanup_f
-
- -
- - - diff --git a/fortran/doc/DevelGuide/toc_index.html b/fortran/doc/DevelGuide/toc_index.html deleted file mode 100644 index 94a2792..0000000 --- a/fortran/doc/DevelGuide/toc_index.html +++ /dev/null @@ -1,552 +0,0 @@ - - - - - - - -Table of Contents - - - - -
-
- -
-

TABLE OF CONTENTS

- -
- - - diff --git a/fortran/examples/Makefile.am b/fortran/examples/Makefile.am index caaa08c..cdd9317 100644 --- a/fortran/examples/Makefile.am +++ b/fortran/examples/Makefile.am @@ -46,12 +46,10 @@ INSTALL_FILES=h5_crtdat.f90 h5_rdwt.f90 \ # Add attention tests for Fortran 2003 features -if FORTRAN_2003_CONDITIONAL_F - EXAMPLE_PROG += rwdset_fortran2003 nested_derived_type \ - compound_fortran2003 compound_complex_fortran2003 - INSTALL_FILES += rwdset_fortran2003.f90 nested_derived_type.f90 \ - compound_fortran2003.f90 compound_complex_fortran2003.f90 -endif +EXAMPLE_PROG += rwdset_fortran2003 nested_derived_type \ + compound_fortran2003 compound_complex_fortran2003 +INSTALL_FILES += rwdset_fortran2003.f90 nested_derived_type.f90 \ + compound_fortran2003.f90 compound_complex_fortran2003.f90 TEST_SCRIPT=testh5fc.sh TEST_EXAMPLES_SCRIPT=$(INSTALL_SCRIPT_FILES) @@ -103,12 +101,10 @@ refregexample: refregexample.f90 mountexample: mountexample.f90 compound: compound.f90 ph5example: ph5example.f90 -if FORTRAN_2003_CONDITIONAL_F rwdset_fortran2003: rwdset_fortran2003.f90 nested_derived_type: nested_derived_type.f90 compound_fortran2003: compound_fortran2003.f90 compound_complex_fortran2003: compound_complex_fortran2003.f90 -endif include $(top_srcdir)/config/examples.am include $(top_srcdir)/config/conclude.am diff --git a/fortran/examples/Makefile.in b/fortran/examples/Makefile.in index c894b75..f97fdc8 100644 --- a/fortran/examples/Makefile.in +++ b/fortran/examples/Makefile.in @@ -104,14 +104,6 @@ DIST_COMMON = $(top_srcdir)/config/commence.am \ $(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \ $(srcdir)/run-fortran-ex.sh.in $(srcdir)/testh5fc.sh.in \ $(top_srcdir)/bin/test-driver - -# Add attention tests for Fortran 2003 features -@FORTRAN_2003_CONDITIONAL_F_TRUE@am__append_1 = rwdset_fortran2003 nested_derived_type \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ compound_fortran2003 compound_complex_fortran2003 - -@FORTRAN_2003_CONDITIONAL_F_TRUE@am__append_2 = rwdset_fortran2003.f90 nested_derived_type.f90 \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ compound_fortran2003.f90 compound_complex_fortran2003.f90 - TESTS = $(TEST_SCRIPT) subdir = fortran/examples ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -120,7 +112,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-fortran-ex.sh testh5fc.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -404,14 +397,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -421,13 +421,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -469,6 +468,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ @@ -619,17 +630,21 @@ INSTALL_SCRIPT_FILES = run-fortran-ex.sh # be run. # We don't tell automake about these programs so that it doesn't try to # compile them with the regular fortran compiler. + +# Add attention tests for Fortran 2003 features EXAMPLE_PROG = h5_crtdat h5_rdwt h5_crtatt h5_crtgrp h5_crtgrpar \ h5_crtgrpd h5_extend h5_subset h5_cmprss hyperslab selectele \ refobjexample refregexample mountexample compound \ - $(am__append_1) + rwdset_fortran2003 nested_derived_type compound_fortran2003 \ + compound_complex_fortran2003 # List files to be installed here INSTALL_FILES = h5_crtdat.f90 h5_rdwt.f90 h5_crtatt.f90 h5_crtgrp.f90 \ h5_crtgrpar.f90 h5_crtgrpd.f90 h5_extend.f90 h5_subset.f90 \ h5_cmprss.f90 hyperslab.f90 selectele.f90 refobjexample.f90 \ refregexample.f90 mountexample.f90 compound.f90 ph5example.f90 \ - $(am__append_2) + rwdset_fortran2003.f90 nested_derived_type.f90 \ + compound_fortran2003.f90 compound_complex_fortran2003.f90 TEST_SCRIPT = testh5fc.sh TEST_EXAMPLES_SCRIPT = $(INSTALL_SCRIPT_FILES) @@ -1067,10 +1082,10 @@ refregexample: refregexample.f90 mountexample: mountexample.f90 compound: compound.f90 ph5example: ph5example.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@rwdset_fortran2003: rwdset_fortran2003.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@nested_derived_type: nested_derived_type.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@compound_fortran2003: compound_fortran2003.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@compound_complex_fortran2003: compound_complex_fortran2003.f90 +rwdset_fortran2003: rwdset_fortran2003.f90 +nested_derived_type: nested_derived_type.f90 +compound_fortran2003: compound_fortran2003.f90 +compound_complex_fortran2003: compound_complex_fortran2003.f90 # How to create EXAMPLEDIR if it doesn't already exist $(EXAMPLEDIR): diff --git a/fortran/examples/nested_derived_type.f90 b/fortran/examples/nested_derived_type.f90 index f806110..65e7e75 100644 --- a/fortran/examples/nested_derived_type.f90 +++ b/fortran/examples/nested_derived_type.f90 @@ -23,13 +23,13 @@ PROGRAM main IMPLICIT NONE ! KIND parameters - INTEGER, PARAMETER :: int_k1 = SELECTED_INT_KIND(Fortran_INTEGER_1) ! This should map to INTEGER*1 on most modern processors - INTEGER, PARAMETER :: int_k4 = SELECTED_INT_KIND(Fortran_INTEGER_2) ! This should map to INTEGER*2 on most modern processors - INTEGER, PARAMETER :: int_k8 = SELECTED_INT_KIND(Fortran_INTEGER_4) ! This should map to INTEGER*4 on most modern processors - INTEGER, PARAMETER :: int_k16 = SELECTED_INT_KIND(Fortran_INTEGER_8) ! This should map to INTEGER*8 on most modern processors + INTEGER, PARAMETER :: int_k1 = SELECTED_INT_KIND(2) ! This should map to INTEGER*1 on most modern processors + INTEGER, PARAMETER :: int_k4 = SELECTED_INT_KIND(4) ! This should map to INTEGER*2 on most modern processors + INTEGER, PARAMETER :: int_k8 = SELECTED_INT_KIND(9) ! This should map to INTEGER*4 on most modern processors + INTEGER, PARAMETER :: int_k16 = SELECTED_INT_KIND(18) ! This should map to INTEGER*8 on most modern processors - INTEGER, PARAMETER :: r_k4 = SELECTED_REAL_KIND(Fortran_REAL_4) ! This should map to REAL*4 on most modern processors - INTEGER, PARAMETER :: r_k8 = SELECTED_REAL_KIND(Fortran_REAL_8) ! This should map to REAL*8 on most modern processors + INTEGER, PARAMETER :: r_k4 = SELECTED_REAL_KIND(6,37) ! This should map to REAL*4 on most modern processors + INTEGER, PARAMETER :: r_k8 = SELECTED_REAL_KIND(15,307) ! This should map to REAL*8 on most modern processors ! FILES diff --git a/fortran/examples/rwdset_fortran2003.f90 b/fortran/examples/rwdset_fortran2003.f90 index d65db9e..682676f 100644 --- a/fortran/examples/rwdset_fortran2003.f90 +++ b/fortran/examples/rwdset_fortran2003.f90 @@ -28,13 +28,13 @@ PROGRAM RWDSET_FORTRAN2003 IMPLICIT NONE - INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(Fortran_INTEGER_1) !should map to INTEGER*1 on most modern processors - INTEGER, PARAMETER :: int_kind_4 = SELECTED_INT_KIND(Fortran_INTEGER_2) !should map to INTEGER*2 on most modern processors - INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(Fortran_INTEGER_4) !should map to INTEGER*4 on most modern processors - INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(Fortran_INTEGER_8) !should map to INTEGER*8 on most modern processors + INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(2) !should map to INTEGER*1 on most modern processors + INTEGER, PARAMETER :: int_kind_4 = SELECTED_INT_KIND(4) !should map to INTEGER*2 on most modern processors + INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors + INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(18) !should map to INTEGER*8 on most modern processors - INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors - INTEGER, PARAMETER :: real_kind_15 = SELECTED_REAL_KIND(Fortran_REAL_8) !should map to REAL*8 on most modern processors + INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(6,37) !should map to REAL*4 on most modern processors + INTEGER, PARAMETER :: real_kind_15 = SELECTED_REAL_KIND(15,307) !should map to REAL*8 on most modern processors CHARACTER(LEN=8), PARAMETER :: filename = "dsetf.h5" ! File name CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name @@ -148,12 +148,12 @@ PROGRAM RWDSET_FORTRAN2003 CALL h5dread_f(dset_idr8, h5kind_to_type(real_kind_15,H5_REAL_KIND), f_ptr, error) ! memory type - WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(Fortran_INTEGER_1): ',data_out_i8a - WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(Fortran_INTEGER_4): ',data_out_i4 - WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(Fortran_INTEGER_8): ',data_out_i8 - WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(Fortran_INTEGER_16): ',data_out_i16 - WRITE(*,'(A,4(1x,f9.4))' )'SELECTED_REAL_KIND(Fortran_REAL_7): ',data_out_r7 - WRITE(*,'(A,4(1x,f16.10))' )'SELECTED_REAL_KIND(Fortran_REAL_15): ',data_out_r15 + WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(2): ',data_out_i8a + WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(4): ',data_out_i4 + WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(9): ',data_out_i8 + WRITE(*,'(A,4i8)' )'SELECTED_INT_KIND(18): ',data_out_i16 + WRITE(*,'(A,4(1x,f9.4))' )'SELECTED_REAL_KIND(6,37): ',data_out_r7 + WRITE(*,'(A,4(1x,f16.10))' )'SELECTED_REAL_KIND(15,307): ',data_out_r15 ! ! Close the dataset. ! diff --git a/fortran/src/H5Af.c b/fortran/src/H5Af.c index bc2e9f1..8f012cf 100644 --- a/fortran/src/H5Af.c +++ b/fortran/src/H5Af.c @@ -1,6 +1,6 @@ /****h* H5Af/H5Af * PURPOSE - * This file contains C stubs for H5A Fortran APIs + * This file contains C stubs for H5A Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -26,942 +26,31 @@ /****if* H5Af/h5acreate_c * NAME - * h5acreate_c + * h5acreate_c * PURPOSE - * Call H5Acreate2 to create an attribute + * Call H5Acreate2 to create an attribute * INPUTS - * obj_id - object identifier - * name - name of the attribute - * namelen - name length - * type_id - datatype identifier - * space_id - dataspace identifier - * crt_pr - identifier of creation property list + * obj_id - object identifier + * name - name of the attribute + * namelen - name length + * type_id - datatype identifier + * space_id - dataspace identifier + * crt_pr - identifier of creation property list * OUTPUTS - * attr_id - attribute identifier + * attr_id - attribute identifier * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5acreate_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *type_id, - hid_t_f *space_id, hid_t_f *crt_prp, hid_t_f *aapl, hid_t_f *attr_id) -/*******/ -{ - char *c_name = NULL; /* Buffer to hold C string */ - int_f ret_value = 0; /* Return value */ - - /* - * Convert FORTRAN name to C name - */ - if(NULL == (c_name = HD5f2cstring(name, (size_t)*namelen))) - HGOTO_DONE(FAIL); - - /* - * Call H5Acreate2 function. - */ - if((*attr_id = (hid_t_f)H5Acreate2((hid_t)*obj_id, c_name, (hid_t)*type_id, (hid_t)*space_id, (hid_t)*crt_prp, (hid_t)*aapl)) < 0) - HGOTO_DONE(FAIL); - -done: - if(c_name) - HDfree(c_name); - return ret_value; -} - -/****if* H5Af/h5aopen_name_c - * NAME - * h5aopen_name_c - * PURPOSE - * Call H5Aopen to open an attribute - * INPUTS - * obj_id - object identifier - * name - name of the attribute - * namelen - name length - * OUTPUTS - * attr_id - dataset identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5aopen_name_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_id) -/*******/ -{ - char *c_name = NULL; /* Buffer to hold C string */ - int_f ret_value = 0; /* Return value */ - - /* - * Convert FORTRAN name to C name - */ - if((c_name = HD5f2cstring(name, (size_t)*namelen)) == NULL) - HGOTO_DONE(FAIL); - - /* - * Call H5Aopen function. - */ - if((*attr_id = (hid_t_f)H5Aopen((hid_t)*obj_id, c_name, H5P_DEFAULT)) < 0) - HGOTO_DONE(FAIL); - -done: - if(c_name) - HDfree(c_name); - return ret_value; -} - -/****if* H5Af/h5awritec_c - * NAME - * h5awritec_c - * PURPOSE - * Call h5awrite_c to write a character attribute - * INPUTS - * attr_id - dataset identifier - * mem_type_id - memory datatype identifier - * buf - character data buffer - * dims - array to store dimensions sizes of buf; used only - * by Fortran routine. - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday , August 12, 1999 - * HISTORY - * dims paramete added. - * April 4, 2001 - * SOURCE -*/ -int_f -nh5awritec_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} -int_f -nh5awritec_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5awritec_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - - - -/****if* H5Af/h5awrite_c - * NAME - * h5awrite_c - * PURPOSE - * Call H5Awrite to write a attribute - * INPUTS - * attr_id - attribute identifier - * mem_type_id - memory datatype identifier - * buf - data buffer - * dims - array to store dimensions sizes of buf; used only - * by Fortran routine. - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * dims parameter added - * April 4, 2001 - * Added nh5awrite_integer(real,double)_s,1-7 functions to eliminate - * complains about wrong parameters types in h5awrite_c function - * called by Fortran routines. - * October 9, 2006 EIP - * SOURCE -*/ -int_f -nh5awrite_integer_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_integer_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_real_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_double_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - /* - * Call h5awrite_c function. - */ - return nh5awrite_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5awrite_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED *dims) -/******/ -{ - int_f ret_value=0; /* Return value */ - - /* - * Call H5Awrite function. - */ - if (H5Awrite((hid_t)*attr_id, (hid_t)*mem_type_id, buf) < 0) - HGOTO_DONE(FAIL); - -done: - return ret_value; -} - - -/****if* H5Af/h5areadc_c - * NAME - * h5areadc_c - * PURPOSE - * Call h5aread_c to read character attribute - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * dims - array to store dimensions sizes of buf; used only - * by Fortran routine. - * OUTPUTS - * buf - character data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * dims parameter added. - * April 4, 2001 - * Added nh5areadc_s,1-7 functions to eliminate - * complains about wrong parameters types in h5awrite_c function - * called by Fortran routines. - * October 9, 2006 EIP - * SOURCE -*/ -int_f -nh5areadc_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} -int_f -nh5areadc_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - -int_f -nh5areadc_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} -int_f -nh5areadc_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, _fcdtocp(buf), dims); -} - - - -/****if* H5Af/h5aread_c - * NAME - * h5aread_c - * PURPOSE - * Call H5Aread to read an attribute - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * dims - array to store dimensions sizes of buf; used only - * by Fortran routine. - * OUTPUTS - * buf - data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * dims paramete added. - * April 4, 2001 - * Added nh5aread_integer(real,double)_s,1-7 functions to eliminate - * complains about wrong parameters types in h5awrite_c function - * called by Fortran routines. - * October 9, 2006 EIP - * SOURCE -*/ -int_f -nh5aread_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - int_f ret_value=0; /* Return value */ - - /* - * Call H5Aread function. - */ - if (H5Aread((hid_t)*attr_id, (hid_t)*mem_type_id, buf) < 0) - HGOTO_DONE(FAIL); - -done: - return ret_value; -} - -int_f -nh5aread_integer_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_integer_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_real_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - -int_f -nh5aread_double_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void H5_ATTR_UNUSED * dims) -/******/ -{ - /* - * Call h5aread_c function. - */ - return nh5aread_c(attr_id, mem_type_id, buf, dims); -} - - -/****if* H5Af/h5aclose_c - * NAME - * h5aclose_c - * PURPOSE - * Call H5Aclose to close an attribute - * INPUTS - * attr_id - identifier of an attribute to be closed - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * - * SOURCE -*/ - -int_f -nh5aclose_c ( hid_t_f *attr_id ) -/******/ -{ - int_f ret_value=0; /* Return value */ - - if (H5Aclose((hid_t)*attr_id) < 0) - HGOTO_DONE(FAIL); - -done: - return ret_value; -} - -/****if* H5Af/h5adelete_c - * NAME - * h5adelete_c - * PURPOSE - * Call H5Adelete to delete an attribute - * INPUTS - * obj_id - object identifier - * name - name of the attribute - * namelen - name length - * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 12, 1999 + * Thursday, August 12, 1999 * HISTORY * * SOURCE */ int_f -nh5adelete_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen) -/******/ +h5acreate_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *type_id, + hid_t_f *space_id, hid_t_f *crt_prp, hid_t_f *aapl, hid_t_f *attr_id) +/*******/ { char *c_name = NULL; /* Buffer to hold C string */ int_f ret_value = 0; /* Return value */ @@ -969,147 +58,85 @@ nh5adelete_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen) /* * Convert FORTRAN name to C name */ - if((c_name = HD5f2cstring(name, (size_t)*namelen)) == NULL) + if(NULL == (c_name = HD5f2cstring(name, (size_t)*namelen))) HGOTO_DONE(FAIL); /* - * Call H5Adelete function. + * Call H5Acreate2 function. */ - if(H5Adelete((hid_t)*obj_id, c_name) < 0) - HGOTO_DONE(FAIL); + if((*attr_id = (hid_t_f)H5Acreate2((hid_t)*obj_id, c_name, (hid_t)*type_id, (hid_t)*space_id, (hid_t)*crt_prp, (hid_t)*aapl)) < 0) + HGOTO_DONE(FAIL); done: if(c_name) HDfree(c_name); - return ret_value; } - -/****if* H5Af/h5aopen_idx_c +/****if* H5Af/h5adelete_c * NAME - * h5aopen_idx_c + * h5adelete_c * PURPOSE - * Call H5Aopen_by_idx to open an attribute + * Call H5Adelete to delete an attribute * INPUTS - * obj_id - object identifier - * idx - attribute index ( zero based) - * OUTPUTS - * attr_id - attribute identifier + * obj_id - object identifier + * name - name of the attribute + * namelen - name length * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 12, 1999 + * Thursday, August 12, 1999 * HISTORY * * SOURCE */ int_f -nh5aopen_idx_c (hid_t_f *obj_id, int_f *idx, hid_t_f *attr_id) +h5adelete_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen) /******/ { - int_f ret_value = 0; /* Return value */ + char *c_name = NULL; /* Buffer to hold C string */ + int_f ret_value = 0; /* Return value */ /* - * Call H5Aopen_by_idx function. + * Convert FORTRAN name to C name */ - if((*attr_id = (hid_t_f)H5Aopen_by_idx((hid_t)*obj_id, ".", H5_INDEX_CRT_ORDER, H5_ITER_INC, (hsize_t)*idx, H5P_DEFAULT, H5P_DEFAULT)) < 0) + if((c_name = HD5f2cstring(name, (size_t)*namelen)) == NULL) HGOTO_DONE(FAIL); -done: - return ret_value; -} - - -/****if* H5Af/h5aget_space_c - * NAME - * h5aget_space_c - * PURPOSE - * Call H5Aget_space to get attribute's dataspace - * INPUTS - * attr_id - attribute identifier - * OUTPUTS - * space_id - dataspace identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5aget_space_c (hid_t_f *attr_id, hid_t_f *space_id) -/******/ -{ - int_f ret_value=0; /* Return value */ - /* - * Call H5Aget_space function. + * Call H5Adelete function. */ - if ((*space_id = (hid_t_f)H5Aget_space((hid_t)*attr_id)) < 0) + if(H5Adelete((hid_t)*obj_id, c_name) < 0) HGOTO_DONE(FAIL); done: - return ret_value; -} - -/****if* H5Af/h5aget_type_c - * NAME - * h5aget_type_c - * PURPOSE - * Call H5Aget_space to get attribute's datatype - * INPUTS - * attr_id - attribute identifier - * OUTPUTS - * type_id - datatype identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, August 12, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5aget_type_c (hid_t_f *attr_id, hid_t_f *type_id) -/******/ -{ - int_f ret_value=0; /* Return value */ - - /* - * Call H5Aget_type function. - */ - if ((*type_id = (hid_t_f)H5Aget_type((hid_t)*attr_id)) < 0) - HGOTO_DONE(FAIL); + if(c_name) + HDfree(c_name); -done: - return ret_value; + return ret_value; } /****if* H5Af/h5aget_num_attrs_c * NAME - * h5aget_num_attrs_c + * h5aget_num_attrs_c * PURPOSE - * Call H5Oget_info to determine number of - * attributes of an object + * Call H5Oget_info to determine number of + * attributes of an object * INPUTS - * obj_id - object identifier - * attr_num - number of attributes + * obj_id - object identifier + * attr_num - number of attributes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 12, 1999 + * Thursday, August 12, 1999 * HISTORY * * SOURCE */ int_f -nh5aget_num_attrs_c (hid_t_f *obj_id, int_f *attr_num) +h5aget_num_attrs_c (hid_t_f *obj_id, int_f *attr_num) /******/ { H5O_info_t oinfo; /* Object info */ @@ -1130,25 +157,25 @@ done: /****if* H5Af/h5aget_name_c * NAME - * h5aget_name_c + * h5aget_name_c * PURPOSE - * Call H5Aget_name to get attribute's name + * Call H5Aget_name to get attribute's name * INPUTS - * attr_id - attribute identifier - * bufsize - size of the buffer + * attr_id - attribute identifier + * bufsize - size of the buffer * OUTPUTS - * buf - buffer to hold the name + * buf - buffer to hold the name * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 12, 1999 + * Thursday, August 12, 1999 * HISTORY * * SOURCE */ int_f -nh5aget_name_c(hid_t_f *attr_id, size_t_f *bufsize, _fcd buf) +h5aget_name_c(hid_t_f *attr_id, size_t_f *bufsize, _fcd buf) /******/ { size_t c_bufsize; @@ -1179,99 +206,36 @@ done: return ret_value; } -/****if* H5Af/h5aget_storage_size_c - * NAME - * h5aget_storage_size_c - * PURPOSE - * Call H5Aget_storage_size - * INPUTS - * attr_id - identifier of an attribute - * OUTPUTS - * size - attributes storage requirements - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * M. Scot Breitenfeld - * January, 2008 - * HISTORY - * N/A - * SOURCE -*/ - -int_f -nh5aget_storage_size_c ( hid_t_f *attr_id, hsize_t_f *size) -/******/ -{ - int_f ret_value=0; /* Return value */ - - if ((*size = (hsize_t_f)H5Aget_storage_size((hid_t)*attr_id)) < 0) - HGOTO_DONE(FAIL); - -done: - return ret_value; -} - -/****if* H5Af/h5aget_create_plist_c - * NAME - * h5aget_create_plist_c - * PURPOSE - * Call H5Aget_create_plist - * INPUTS - * attr_id - identifier of an attribute - * OUTPUTS - * creation_prop_id - Identifier for the attribute’s creation property - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * M. Scot Breitenfeld - * January, 2008 - * HISTORY - * N/A - * SOURCE -*/ - -int_f -nh5aget_create_plist_c ( hid_t_f *attr_id, hid_t_f *creation_prop_id) -/******/ -{ - int_f ret_value=0; /* Return value */ - - if ((*creation_prop_id = (hid_t_f)H5Aget_create_plist((hid_t)*attr_id)) < 0) - HGOTO_DONE(FAIL); - -done: - return ret_value; -} /****if* H5Af/h5arename_by_name_c * NAME - * h5arename_by_name_c + * h5arename_by_name_c * PURPOSE - * Calls H5Arename_by_name + * Calls H5Arename_by_name * INPUTS - * loc_id - Object identifier - * obj_name - Name of object, relative to location, - * whose attribute is to be renamed - * obj_name_len - Object name length - * old_attr_name - Prior attribute name - * old_attr_name_len - Prior attribute name length - * new_attr_name - New attribute name - * new_attr_name_len - New attribute name length - * lapl_id - Link access property list identifier + * loc_id - Object identifier + * obj_name - Name of object, relative to location, + * whose attribute is to be renamed + * obj_name_len - Object name length + * old_attr_name - Prior attribute name + * old_attr_name_len - Prior attribute name length + * new_attr_name - New attribute name + * new_attr_name_len - New attribute name length + * lapl_id - Link access property list identifier * OUTPUTS * N/A * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5arename_by_name_c( hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5arename_by_name_c( hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd old_attr_name, size_t_f *old_attr_namelen, _fcd new_attr_name, size_t_f *new_attr_namelen, hid_t_f *lapl_id ) @@ -1306,27 +270,27 @@ done: /****if* H5Af/h5aopen_c * NAME - * h5aopen_c + * h5aopen_c * PURPOSE - * Call H5Aopen to open an attribute + * Call H5Aopen to open an attribute * INPUTS - * obj_id - Identifer for object to which attribute is attached + * obj_id - Identifer for object to which attribute is attached * attr_name - Attribute access property list - * attr_namelen - size of attr_name - * aapl_id - Link access property list + * attr_namelen - size of attr_name + * aapl_id - Link access property list * OUTPUTS - * attr_id - dataset identifier + * attr_id - dataset identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5aopen_c (hid_t_f *obj_id, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *aapl_id, hid_t_f *attr_id) +h5aopen_c (hid_t_f *obj_id, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *aapl_id, hid_t_f *attr_id) /******/ { char *c_attr_name = NULL; /* Buffer to hold C string */ @@ -1351,30 +315,30 @@ done: } /****if* H5Af/h5adelete_by_name_c * NAME - * h5adelete_by_name_c + * h5adelete_by_name_c * PURPOSE - * Call h5adelete_by_name to remove an attribute from a specified location + * Call h5adelete_by_name to remove an attribute from a specified location * INPUTS - * loc_id - identifer for object to which attribute is attached - * obj_name - object identifier - * obj_namelen - name length - * attr_name - name of the attribute - * attr_namelen - name length - * lapl_id - link access property list + * loc_id - identifer for object to which attribute is attached + * obj_name - object identifier + * obj_namelen - name length + * attr_name - name of the attribute + * attr_namelen - name length + * lapl_id - link access property list * * OUTPUTS * N/A * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5adelete_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id) +h5adelete_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id) /******/ { char *c_obj_name = NULL; /* Buffer to hold C string */ @@ -1404,30 +368,30 @@ done: } /****if* H5Af/h5adelete_by_idx_c * NAME - * h5adelete_by_idx_c + * h5adelete_by_idx_c * PURPOSE - * Call h5adelete_by_idx + * Call h5adelete_by_idx * INPUTS - * loc_id - Location or object identifier; may be dataset or group - * obj_name - object identifier - * obj_namelen - name length - * attr_name - name of the attribute - * attr_namelen - name length - * lapl_id - link access property list + * loc_id - Location or object identifier; may be dataset or group + * obj_name - object identifier + * obj_namelen - name length + * attr_name - name of the attribute + * attr_namelen - name length + * lapl_id - link access property list * * OUTPUTS * N/A * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5adelete_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5adelete_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id) /******/ { @@ -1454,50 +418,50 @@ done: } /****if* H5Af/h5aget_name_by_idx_c * NAME - * h5aget_name_by_idx_c + * h5aget_name_by_idx_c * PURPOSE - * Call h5aget_name_by_idx + * Call h5aget_name_by_idx * INPUTS * * - * loc_id - Identifer for object to which attribute is attached - * obj_name - Name of object, relative to location, - * from which attribute is to be removed *TEST* check NULL - * idx_type - Type of index; Possible values are: + * loc_id - Identifer for object to which attribute is attached + * obj_name - Name of object, relative to location, + * from which attribute is to be removed *TEST* check NULL + * idx_type - Type of index; Possible values are: * H5_INDEX_UNKNOWN - Unknown index type * H5_INDEX_NAME - Index on names * H5_INDEX_CRT_ORDER - Index on creation order * H5_INDEX_N - Number of indices defined * - * order - Order in which to iterate over index; Possible values are: + * order - Order in which to iterate over index; Possible values are: * H5_ITER_UNKNOWN - Unknown order * H5_ITER_INC - Increasing order * H5_ITER_DEC - Decreasing order * H5_ITER_NATIVE - No particular order, whatever is fastest * H5_ITER_N - Number of iteration orders * - * n - Attribute’s position in index - * attr_id - Attribute identifier - * size - Buffer size ! *TEST* check for 0 value *CHECK* should this return the correct value + * n - Attribute’s position in index + * attr_id - Attribute identifier + * size - Buffer size ! *TEST* check for 0 value *CHECK* should this return the correct value * - * lapl_id - Link access property list - * hdferr - Error code: - * Returns attribute name size, -1 if fail + * lapl_id - Link access property list + * hdferr - Error code: + * Returns attribute name size, -1 if fail * * OUTPUTS - * name - Attribute name + * name - Attribute name * * RETURNS - * Size of buffer on success, -1 on failure + * Size of buffer on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5aget_name_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5aget_name_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, _fcd name, size_t_f *size, hid_t_f *lapl_id) /******/ @@ -1545,42 +509,42 @@ done: /****if* H5Af/h5aopen_by_idx_c * NAME - * h5aopen_by_idx_c + * h5aopen_by_idx_c * PURPOSE - * Call H5Aopen_by_idx + * Call H5Aopen_by_idx * INPUTS - * loc_id - Object identifier - * obj_name - Name of object to which attribute is attached - * obj_namelen - name length - * idx_type - Type of index; Possible values are: + * loc_id - Object identifier + * obj_name - Name of object to which attribute is attached + * obj_namelen - name length + * idx_type - Type of index; Possible values are: * H5_INDEX_UNKNOWN - Unknown index type * H5_INDEX_NAME - Index on names * H5_INDEX_CRT_ORDER - Index on creation order * H5_INDEX_N - Number of indices defined * - * order - Order in which to iterate over index; Possible values are: + * order - Order in which to iterate over index; Possible values are: * H5_ITER_UNKNOWN - Unknown order * H5_ITER_INC - Increasing order * H5_ITER_DEC - Decreasing order * H5_ITER_NATIVE - No particular order, whatever is fastest * H5_ITER_N - Number of iteration orders * - * n - Attribute’s position in index - * aapl_id - Attribute access property list - * lapl_id - Link access property list + * n - Attribute’s position in index + * aapl_id - Attribute access property list + * lapl_id - Link access property list * OUTPUTS - * attr_id - attribute identifer + * attr_id - attribute identifer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5aopen_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5aopen_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id ) /******/ { @@ -1608,29 +572,29 @@ done: /****if* H5Af/h5aget_info_c * NAME - * h5aget_info_c + * h5aget_info_c * PURPOSE - * Call H5Aget_info + * Call H5Aget_info * INPUTS - * loc_id - Object identifier + * loc_id - Object identifier * OUTPUTS * - * corder_valid - Indicates whether the the creation order data is valid for this attribute - * corder - Is a positive integer containing the creation order of the attribute - * cset - Indicates the character set used for the attribute’s name - * data_size - indicates the size, in the number of characters, of the attribute + * corder_valid - Indicates whether the the creation order data is valid for this attribute + * corder - Is a positive integer containing the creation order of the attribute + * cset - Indicates the character set used for the attribute’s name + * data_size - indicates the size, in the number of characters, of the attribute * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5aget_info_c (hid_t_f *loc_id, int_f *corder_valid, int_f *corder, +h5aget_info_c (hid_t_f *loc_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ) /******/ { @@ -1660,46 +624,46 @@ done: /****if* H5Af/h5aget_info_by_idx_c * NAME - * h5aget_info_by_idx_c + * h5aget_info_by_idx_c * PURPOSE - * Call H5Aget_info_by_idx + * Call H5Aget_info_by_idx * INPUTS - * loc_id - Object identifier - * obj_name - Name of object to which attribute is attached - * obj_namelen - name length - * idx_type - Type of index; Possible values are: + * loc_id - Object identifier + * obj_name - Name of object to which attribute is attached + * obj_namelen - name length + * idx_type - Type of index; Possible values are: * H5_INDEX_UNKNOWN - Unknown index type * H5_INDEX_NAME - Index on names * H5_INDEX_CRT_ORDER - Index on creation order * H5_INDEX_N - Number of indices defined * - * order - Order in which to iterate over index; Possible values are: + * order - Order in which to iterate over index; Possible values are: * H5_ITER_UNKNOWN - Unknown order * H5_ITER_INC - Increasing order * H5_ITER_DEC - Decreasing order * H5_ITER_NATIVE - No particular order, whatever is fastest * H5_ITER_N - Number of iteration orders * - * n - Attribute’s position in index - * lapl_id - Link access property list + * n - Attribute’s position in index + * lapl_id - Link access property list * OUTPUTS * - * corder_valid - Indicates whether the the creation order data is valid for this attribute - * corder - Is a positive integer containing the creation order of the attribute - * cset - Indicates the character set used for the attribute’s name - * data_size - indicates the size, in the number of characters, of the attribute + * corder_valid - Indicates whether the the creation order data is valid for this attribute + * corder - Is a positive integer containing the creation order of the attribute + * cset - Indicates the character set used for the attribute’s name + * data_size - indicates the size, in the number of characters, of the attribute * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5aget_info_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5aget_info_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ) @@ -1739,34 +703,34 @@ done: /****if* H5Af/h5aget_info_by_name_c * NAME - * h5aget_info_by_name_c + * h5aget_info_by_name_c * PURPOSE - * Call H5Aget_info_by_name + * Call H5Aget_info_by_name * INPUTS - * loc_id - Object identifier - * obj_name - Name of object to which attribute is attached - * obj_namelen - name length - * attr_name - Attribute name - * attr_namelen - attribute name length - * lapl_id - Link access property list + * loc_id - Object identifier + * obj_name - Name of object to which attribute is attached + * obj_namelen - name length + * attr_name - Attribute name + * attr_namelen - attribute name length + * lapl_id - Link access property list * OUTPUTS * - * corder_valid - Indicates whether the the creation order data is valid for this attribute - * corder - Is a positive integer containing the creation order of the attribute - * cset - Indicates the character set used for the attribute’s name - * data_size - indicates the size, in the number of characters, of the attribute + * corder_valid - Indicates whether the the creation order data is valid for this attribute + * corder - Is a positive integer containing the creation order of the attribute + * cset - Indicates the character set used for the attribute’s name + * data_size - indicates the size, in the number of characters, of the attribute * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5aget_info_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5aget_info_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ) @@ -1810,38 +774,38 @@ done: /****if* H5Af/h5acreate_by_name_c * NAME - * h5acreate_by_name_c + * h5acreate_by_name_c * PURPOSE - * Call h5acreate_by_name + * Call h5acreate_by_name * INPUTS * - * loc_id - Object identifier - * obj_name - Name of object to which attribute is attached - * obj_namelen - name length - * attr_name - Attribute name - * attr_namelen - attribute name length - * type_id - Attribute datatype identifier - * space_id - Attribute dataspace identifier - * acpl_id - Attribute creation property list identifier (Currently not used.) - * aapl_id - Attribute access property list identifier (Currently not used.) - * lapl_id - Link access property list + * loc_id - Object identifier + * obj_name - Name of object to which attribute is attached + * obj_namelen - name length + * attr_name - Attribute name + * attr_namelen - attribute name length + * type_id - Attribute datatype identifier + * space_id - Attribute dataspace identifier + * acpl_id - Attribute creation property list identifier (Currently not used.) + * aapl_id - Attribute access property list identifier (Currently not used.) + * lapl_id - Link access property list * * OUTPUTS * - * attr - an attribute identifier + * attr - an attribute identifier * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5acreate_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5acreate_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *acpl_id, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id ) @@ -1876,27 +840,27 @@ done: /****if* H5Af/h5aexists_c * NAME - * h5aexists_c + * h5aexists_c * PURPOSE * CAll h5aexists * INPUTS * - * obj_id - Object identifier - * attr_name - Attribute name + * obj_id - Object identifier + * attr_name - Attribute name * OUTPUTS * - * attr_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. + * attr_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * HISTORY * * SOURCE */ int_f -nh5aexists_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_exists) +h5aexists_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_exists) /******/ { char *c_name = NULL; /* Buffer to hold C string */ @@ -1922,29 +886,29 @@ done: /****if* H5Af/h5aexists_by_name_c * NAME - * h5aexists_by_name_c + * h5aexists_by_name_c * PURPOSE * CAll H5Aexists_by_name * INPUTS * - * loc_id - Location identifier - * obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) + * loc_id - Location identifier + * obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) * attr_name - Attribute name - * lapl_id - Link access property list identifier + * lapl_id - Link access property list identifier * OUTPUTS * - * attr_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. + * attr_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * HISTORY * * SOURCE */ int_f -nh5aexists_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, +h5aexists_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id, int_f *attr_exists) /******/ { @@ -1976,30 +940,30 @@ done: /****if* H5Af/h5aopen_by_name_c * NAME - * h5aopen_by_name_c + * h5aopen_by_name_c * PURPOSE - * Call H5Aopen_by_name + * Call H5Aopen_by_name * INPUTS * - * loc_id - Location identifier - * obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) + * loc_id - Location identifier + * obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) * attr_name - Attribute name - * aapl_id - Attribute access property list (Currently unused; should be passed in as H5P_DEFAULT.) - * lapl_id - Link access property list identifier + * aapl_id - Attribute access property list (Currently unused; should be passed in as H5P_DEFAULT.) + * lapl_id - Link access property list identifier * OUTPUTS * - * attr_id - attribute identifier + * attr_id - attribute identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * HISTORY * * SOURCE */ int_f -nh5aopen_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, +h5aopen_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id) /******/ { @@ -2031,29 +995,29 @@ nh5aopen_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd /****if* H5Af/h5arename_c * NAME - * h5arename_c + * h5arename_c * PURPOSE - * Calls H5Arename + * Calls H5Arename * INPUTS - * loc_id - Object identifier - * old_attr_name - Prior attribute name - * old_attr_name_len - Prior attribute name length - * new_attr_name - New attribute name - * new_attr_name_len - New attribute name length + * loc_id - Object identifier + * old_attr_name - Prior attribute name + * old_attr_name_len - Prior attribute name length + * new_attr_name - New attribute name + * new_attr_name_len - New attribute name length * OUTPUTS * N/A * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5arename_c( hid_t_f *loc_id, +h5arename_c( hid_t_f *loc_id, _fcd old_attr_name, size_t_f *old_attr_namelen, _fcd new_attr_name, size_t_f *new_attr_namelen) /******/ diff --git a/fortran/src/H5Aff.F90 b/fortran/src/H5Aff.F90 new file mode 100644 index 0000000..132bf41 --- /dev/null +++ b/fortran/src/H5Aff.F90 @@ -0,0 +1,1873 @@ +!****h* ROBODoc/H5A +! +! NAME +! MODULE H5A +! +! PURPOSE +! This file contains Fortran interfaces for H5A functions. It includes +! all the functions that are independent on whether the Fortran 2003 functions +! are enabled or disabled. +! +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! +! (A) C_LOC and character strings according to the Fortran 2003 standard: +! +! 15.1.2.5 C_LOC(X) +! +! Argument. X shall either +! +! (1) have interoperable type and type parameters and be +! (a) a variable that has the TARGET attribute and is interoperable, +! (b) an allocated allocatable variable that has the TARGET attribute +! and is not an array of zero size, or +! (c) an associated scalar pointer, or +! (2) be a nonpolymorphic scalar, have no length type parameters, and be +! (a) a nonallocatable, nonpointer variable that has the TARGET attribute, +! (b) an allocated allocatable variable that has the TARGET attribute, or +! (c) an associated pointer. +! +! - When X is a character, for interoperability the standard is: +! +! 15.2.1 Interoperability of intrinsic types +! +! ...if the type is character, interoperability also requires that the length type parameter +! be omitted or be specified by an initialization expression whose value is one. +! +! THEREFORE compilers that have not extended the standard require +! +! CHARACTER(LEN=1), TARGET :: chr +! or +! CHARACTER, TARGET :: chr +! +! (B) +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5A function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +#include + +MODULE H5A + + USE, INTRINSIC :: ISO_C_BINDING + + USE H5GLOBAL + + INTERFACE h5awrite_f + MODULE PROCEDURE h5awrite_char_scalar + ! This is the preferred way to call h5awrite + ! by passing an address + MODULE PROCEDURE h5awrite_ptr + END INTERFACE + + INTERFACE h5aread_f + MODULE PROCEDURE h5aread_char_scalar + ! This is the preferred way to call h5aread + ! by passing an address + MODULE PROCEDURE h5aread_ptr + END INTERFACE + +! Interface for the function used to pass the C pointer of the buffer +! to the C H5Awrite routine + INTERFACE + INTEGER FUNCTION h5awrite_f_c(attr_id, mem_type_id, buf) BIND(C, NAME='h5awrite_f_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + TYPE(C_PTR), VALUE :: buf + END FUNCTION h5awrite_f_c + END INTERFACE + +! Interface for the function used to pass the C pointer of the buffer +! to the C H5Aread routine + INTERFACE + INTEGER FUNCTION h5aread_f_c(attr_id, mem_type_id, buf) BIND(C, NAME='h5aread_f_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + TYPE(C_PTR), VALUE :: buf + END FUNCTION h5aread_f_c + END INTERFACE + +CONTAINS + +! +!****s* H5A/h5acreate_f +! +! NAME +! h5acreate_f +! +! PURPOSE +! Creates a dataset as an attribute of a group, dataset, or named datatype +! +! INPUTS +! loc_id - identifier of an object (group, dataset, +! or named datatype) attribute is attached to +! name - attribute name +! type_id - attribute datatype identifier +! space_id - attribute dataspace identifier +! +! OUTPUTS +! attr_id - attribute identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! acpl_id - Attribute creation property list identifier +! appl_id - Attribute access property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! +! SOURCE + SUBROUTINE h5acreate_f(loc_id, name, type_id, space_id, attr_id, & + hdferr, acpl_id, aapl_id ) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name + INTEGER(HID_T), INTENT(IN) :: type_id ! Attribute datatype identifier + INTEGER(HID_T), INTENT(IN) :: space_id ! Attribute dataspace identifier + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: acpl_id ! Attribute creation property list identifier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list identifier + + INTEGER(HID_T) :: acpl_id_default + INTEGER(HID_T) :: aapl_id_default + CHARACTER(LEN=LEN_TRIM(name)+1,KIND=C_CHAR) :: c_name + INTERFACE + INTEGER(HID_T) FUNCTION H5Acreate2(loc_id, name, type_id, & + space_id, acpl_id_default, aapl_id_default) BIND(C,NAME='H5Acreate2') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN), VALUE :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(HID_T), INTENT(IN), VALUE :: type_id + INTEGER(HID_T), INTENT(IN), VALUE :: space_id + INTEGER(HID_T), INTENT(IN), VALUE :: acpl_id_default + INTEGER(HID_T), INTENT(IN), VALUE :: aapl_id_default + END FUNCTION H5Acreate2 + END INTERFACE + + acpl_id_default = H5P_DEFAULT_F + aapl_id_default = H5P_DEFAULT_F + IF (PRESENT(acpl_id)) acpl_id_default = acpl_id + IF (PRESENT(aapl_id)) aapl_id_default = aapl_id + + c_name = TRIM(name)//C_NULL_CHAR + attr_id = h5acreate2(loc_id, c_name, type_id, space_id, & + acpl_id_default, aapl_id_default) + + hdferr = 0 + IF(attr_id.LT.0) hdferr = -1 + + END SUBROUTINE h5acreate_f + +! +!****s* H5A/h5aopen_name_f +! +! NAME +! h5aopen_name_f +! +! PURPOSE +! Opens an attribute specified by name. +! +! INPUTS +! obj_id - identifier of a group, dataset, or named +! datatype atttribute to be attached to +! name - attribute name +! OUTPUTS +! attr_id - attribute identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! SOURCE + SUBROUTINE H5Aopen_name_f(obj_id, name, attr_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + CHARACTER(LEN=LEN_TRIM(name)+1,KIND=C_CHAR) :: c_name + +! H5Aopen_name is deprecated + INTERFACE + INTEGER(HID_T) FUNCTION H5Aopen(obj_id, name, aapl_id) BIND(C,NAME='H5Aopen') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN), VALUE :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(HID_T), INTENT(IN), VALUE :: aapl_id + END FUNCTION H5Aopen + END INTERFACE + + c_name = TRIM(name)//C_NULL_CHAR + attr_id = H5Aopen(obj_id, c_name, H5P_DEFAULT_F) + + hdferr = 0 + IF(attr_id.LT.0) hdferr = -1 + + END SUBROUTINE H5Aopen_name_f +! +!****s* H5A/H5Aopen_idx_f +! +! NAME +! H5Aopen_idx_f +! +! PURPOSE +! Opens the attribute specified by its index. +! +! INPUTS +! obj_id - identifier of a group, dataset, or named +! datatype an attribute to be attached to +! index - index of the attribute to open (zero-based) +! OUTPUTS +! attr_id - attribute identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! SOURCE + SUBROUTINE H5Aopen_idx_f(obj_id, index, attr_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(IN) :: index ! Attribute index + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** +! H5Aopen_idx is deprecated in favor of the function H5Aopen_by_idx. + INTERFACE + INTEGER(HID_T) FUNCTION H5Aopen_by_idx(obj_id, index) BIND(C,NAME='H5Aopen_by_idx') + IMPORT :: HID_T + IMPORT :: C_INT + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER(C_INT), INTENT(IN) :: index + END FUNCTION H5Aopen_by_idx + END INTERFACE + + attr_id = H5Aopen_by_idx(obj_id, INT(index, C_INT)) + + hdferr = 0 + IF(attr_id.LT.0) hdferr = -1 + + END SUBROUTINE H5Aopen_idx_f +! +!****s* H5A/H5Aget_space_f +! +! NAME +! H5Aget_space_f +! +! PURPOSE +! Gets a copy of the dataspace for an attribute. +! +! INPUTS +! attr_id - attribute identifier +! +! OUTPUTS +! space_id - attribite dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! +! SOURCE + SUBROUTINE H5Aget_space_f(attr_id, space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(OUT) :: space_id ! Attribute dataspace identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER(HID_T) FUNCTION H5Aget_space(attr_id) BIND(C,NAME='H5Aget_space') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN), VALUE :: attr_id + END FUNCTION H5Aget_space + END INTERFACE + + space_id = H5Aget_space(attr_id) + + hdferr = 0 + IF(space_id.LT.0) hdferr = -1 + + END SUBROUTINE H5Aget_space_f +! +!****s* H5A/H5Aget_type_f +! +! NAME +! H5Aget_type_f +! +! PURPOSE +! Gets an attribute datatype. +! +! INPUTS +! attr_id - attribute identifier +! OUTPUTS +! type_id - attribute datatype identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! SOURCE + SUBROUTINE H5Aget_type_f(attr_id, type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(OUT) :: type_id ! Attribute datatype identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER(HID_T) FUNCTION H5Aget_type(attr_id) BIND(C,NAME='H5Aget_type') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN), VALUE :: attr_id + END FUNCTION H5Aget_type + END INTERFACE + + type_id = H5Aget_type(attr_id) + + hdferr = 0 + IF(type_id.LT.0) hdferr = -1 + + END SUBROUTINE H5Aget_type_f +! +!****s* H5A/H5Aget_name_f +! +! NAME +! H5Aget_name_f +! +! PURPOSE +! Gets an attribute name. +! +! INPUTS +! attr_id - attribute identifier +! size - size of a buffer to read name in +! OUTPUTS +! buf - buffer to read name in +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! +! SOURCE + SUBROUTINE h5aget_name_f(attr_id, size, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size + CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Buffer to hold attribute name + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! name length is successful, -1 if fail +!***** + INTERFACE + INTEGER FUNCTION h5aget_name_c(attr_id, size, buf) & + BIND(C,NAME='h5aget_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: attr_id + INTEGER(SIZE_T), INTENT(IN) :: size + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buf + END FUNCTION h5aget_name_c + END INTERFACE + + hdferr = h5aget_name_c(attr_id, size, buf) + END SUBROUTINE h5aget_name_f +! +!****s* H5A/H5Aget_name_by_idx_f +! +! NAME +! H5Aget_name_by_idx_f +! +! PURPOSE +! Gets an attribute name, by attribute index position. +! +! INPUTS +! loc_id - Location of object to which attribute is attached +! obj_name - Name of object to which attribute is attached, relative to location +! idx_type - Type of index; Possible values are: +! H5_INDEX_UNKNOWN_F = -1 - Unknown index type +! H5_INDEX_NAME_F - Index on names +! H5_INDEX_CRT_ORDER_F - Index on creation order +! H5_INDEX_N_F - Number of indices defined +! +! order - Order in which to iterate over index; Possible values are: +! H5_ITER_UNKNOWN_F - Unknown order +! H5_ITER_INC_F - Increasing order +! H5_ITER_DEC_F - Decreasing order +! H5_ITER_NATIVE_F - No particular order, whatever is fastest +! H5_ITER_N_F - Number of iteration orders +! order - Index traversal order +! n - Attribute’s position in index +! +! OUTPUTS +! name - Attribute name +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! size - Size, in bytes, of attribute name +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE h5aget_name_by_idx_f(loc_id, obj_name, idx_type, order, & + n, name, hdferr, size, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, + ! from which attribute is to be removed *TEST* check NULL + INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + ! H5_ITER_N_F - Number of iteration orders + INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index + CHARACTER(LEN=*), INTENT(OUT) :: name ! Attribute name + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! Returns attribute name size, + ! -1 if fail + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, + ! of the attribute +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: size_default + + INTERFACE + INTEGER FUNCTION h5aget_name_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, & + n, name, size_default, lapl_id_default) BIND(C,NAME='h5aget_name_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER, INTENT(IN) :: idx_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + INTEGER(SIZE_T) :: size_default + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: obj_namelen + END FUNCTION h5aget_name_by_idx_c + END INTERFACE + + obj_namelen = LEN(obj_name) + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + size_default = LEN(name) + + hdferr = h5aget_name_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, & + n, name, size_default, lapl_id_default) + + IF(PRESENT(size)) size = size_default + + + END SUBROUTINE h5aget_name_by_idx_f +! +!****s* H5A/H5Aget_num_attrs_f +! +! NAME +! H5Aget_num_attrs_f +! +! PURPOSE +! Determines the number of attributes attached to an object. +! +! INPUTS +! obj_id - object (group, dataset, or named datatype) +! identifier +! OUTPUTS +! attr_num - number of attributes attached to the object +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! SOURCE + SUBROUTINE h5aget_num_attrs_f(obj_id, attr_num, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(OUT) :: attr_num ! Number of attributes of the object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + INTERFACE + INTEGER FUNCTION h5aget_num_attrs_c(obj_id, attr_num) BIND(C,name='h5aget_num_attrs_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(OUT) :: attr_num + END FUNCTION h5aget_num_attrs_c + END INTERFACE + + hdferr = h5aget_num_attrs_c(obj_id, attr_num) + END SUBROUTINE h5aget_num_attrs_f + +! +!****s* H5A/H5Adelete_f +! +! NAME +! H5Adelete_f +! +! PURPOSE +! Deletes an attribute of an object (group, dataset or +! named datatype) +! +! INPUTS +! obj_id - object identifier +! name - attribute name +! OUTPUTS +! +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! SOURCE + SUBROUTINE H5Adelete_f(obj_id, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER(SIZE_T) :: namelen + + INTERFACE + INTEGER FUNCTION H5Adelete_c(obj_id, name, namelen) BIND(C,NAME='h5adelete_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) :: namelen + END FUNCTION H5Adelete_c + END INTERFACE + + namelen = LEN(name) + hdferr = H5Adelete_c(obj_id, name, namelen) + END SUBROUTINE H5Adelete_f + +! +!****s* H5A/H5Aclose_f +! +! NAME +! H5Aclose_f +! +! PURPOSE +! Closes the specified attribute. +! +! INPUTS +! attr_id - attribute identifier +! OUTPUTS +! +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! SOURCE + + SUBROUTINE H5Aclose_f(attr_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + INTERFACE + INTEGER FUNCTION H5Aclose(attr_id) BIND(C, NAME='H5Aclose') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN), VALUE :: attr_id + END FUNCTION H5Aclose + END INTERFACE + + hdferr = INT(H5Aclose(attr_id)) + END SUBROUTINE H5Aclose_f + +! +!****s* H5A/H5Aget_storage_size_f +! +! NAME +! H5Aget_storage_size_f +! +! PURPOSE +! Returns the amount of storage required for an attribute. +! +! INPUTS +! attr_id - attribute identifier +! OUTPUTS +! size - attribute storage size +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aget_storage_size_f(attr_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Attribute storage requirement + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + INTERFACE + INTEGER(HSIZE_T) FUNCTION H5Aget_storage_size(attr_id) BIND(C,NAME='H5Aget_storage_size') + IMPORT :: HID_T, HSIZE_T + INTEGER(HID_T), INTENT(IN), VALUE :: attr_id + END FUNCTION H5Aget_storage_size + END INTERFACE + + size = H5Aget_storage_size(attr_id) + + hdferr = 0 + IF(size.LT.0) hdferr = -1 + + END SUBROUTINE H5Aget_storage_size_f + +! +!****s* H5A/H5Aget_create_plist_f +! +! NAME +! H5Aget_create_plist_f +! +! PURPOSE +! Gets an attribute creation property list identifier +! +! INPUTS +! attr_id - Identifier of the attribute +! OUTPUTS +! creation_prop_id - Identifier for the attribute’s creation property +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aget_create_plist_f(attr_id, creation_prop_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Identifier of the attribute + INTEGER(HID_T), INTENT(OUT) :: creation_prop_id ! Identifier for the attribute’s creation property + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER(HID_T) FUNCTION H5Aget_create_plist(attr_id) BIND(C,NAME='H5Aget_create_plist') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN), VALUE :: attr_id + END FUNCTION H5Aget_create_plist + END INTERFACE + + creation_prop_id = H5Aget_create_plist(attr_id) + + hdferr = 0 + IF(creation_prop_id.LT.0) hdferr = -1 + + END SUBROUTINE H5Aget_create_plist_f + +! +!****s* H5A/H5Arename_by_name_f +! +! NAME +! H5Arename_by_name_f +! +! PURPOSE +! Renames an attribute +! +! INPUTS +! loc_id - Location or object identifier; may be dataset or group +! obj_name - Name of object, relative to location, +! whose attribute is to be renamed +! old_attr_name - Prior attribute name +! new_attr_name - New attribute name +! lapl_id - Link access property list identifier +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Arename_by_name_f(loc_id, obj_name, old_attr_name, new_attr_name, & + hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, + ! whose attribute is to be renamed + CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name + CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name + + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: old_attr_namelen + INTEGER(SIZE_T) :: new_attr_namelen + + INTERFACE + INTEGER FUNCTION H5Arename_by_name_c(loc_id, obj_name, obj_namelen, & + old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen, & + lapl_id_default) BIND(C,NAME='h5arename_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(SIZE_T) :: obj_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: old_attr_name + INTEGER(SIZE_T) :: old_attr_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_attr_name + INTEGER(SIZE_T) :: new_attr_namelen + INTEGER(HID_T) :: lapl_id_default + + END FUNCTION H5Arename_by_name_c + END INTERFACE + + obj_namelen = LEN(obj_name) + old_attr_namelen = LEN(old_attr_name) + new_attr_namelen = LEN(new_attr_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default=lapl_id + + hdferr = H5Arename_by_name_c(loc_id, obj_name, obj_namelen, & + old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen, & + lapl_id_default) + + END SUBROUTINE H5Arename_by_name_f + +! +!****s* H5A/H5Aopen_f +! +! NAME +! H5Aopen_f +! +! PURPOSE +! Opens an attribute for an object specified by object +! identifier and attribute name +! +! INPUTS +! obj_id - Identifer for object to which attribute is attached +! attr_name - Name of attribute to open +! OUTPUTS +! attr_id - attribute identifier + +! OPTIONAL PARAMETERS +! aapl_id - Attribute access property list +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aopen_f(obj_id, attr_name, attr_id, hdferr, aapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! Success: 0 + ! Failure: -1 + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list +!***** + INTEGER(HID_T) :: aapl_id_default + + INTEGER(SIZE_T) :: attr_namelen + + INTERFACE + INTEGER FUNCTION H5Aopen_c(obj_id, attr_name, attr_namelen, aapl_id_default, attr_id) & + BIND(C,NAME='h5aopen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(HID_T) :: aapl_id_default + INTEGER(SIZE_T) :: attr_namelen + INTEGER(HID_T), INTENT(OUT) :: attr_id + END FUNCTION H5Aopen_c + END INTERFACE + + attr_namelen = LEN(attr_name) + + aapl_id_default = H5P_DEFAULT_F + IF(PRESENT(aapl_id)) aapl_id_default = aapl_id + + hdferr = H5Aopen_c(obj_id, attr_name, attr_namelen, aapl_id_default, attr_id) + + END SUBROUTINE H5Aopen_f + +! +!****s* H5A/H5Adelete_by_idx_f +! +! NAME +! H5Adelete_by_idx_f +! +! PURPOSE +! Deletes an attribute from an object according to index order +! +! INPUTS +! loc_id - Location or object identifier; may be dataset or group +! obj_name - Name of object, relative to location, from which attribute is to be removed +! idx_type - Type of index; Possible values are: +! H5_INDEX_UNKNOWN_F = -1 - Unknown index type +! H5_INDEX_NAME_F - Index on names +! H5_INDEX_CRT_ORDER_F - Index on creation order +! H5_INDEX_N_F - Number of indices defined +! +! order - Order in which to iterate over index; Possible values are: +! H5_ITER_UNKNOWN_F - Unknown order +! H5_ITER_INC_F - Increasing order +! H5_ITER_DEC_F - Decreasing order +! H5_ITER_NATIVE_F - No particular order, whatever is fastest +! H5_ITER_N_F - Number of iteration orders +! +! n - Offset within index +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Adelete_by_idx_f(loc_id, obj_name, idx_type, order, n, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, + ! from which attribute is to be removed + INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + ! H5_ITER_N_F - Number of iteration orders + INTEGER(HSIZE_T), INTENT(IN) :: n ! Offset within index + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER(SIZE_T) :: obj_namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Adelete_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default) & + BIND(C,NAME='h5adelete_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER, INTENT(IN) :: idx_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: obj_namelen + END FUNCTION H5Adelete_by_idx_c + END INTERFACE + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + obj_namelen = LEN(obj_name) + hdferr = H5Adelete_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default) + + END SUBROUTINE H5Adelete_by_idx_f + +! +!****s* H5A/H5Adelete_by_name_f +! +! NAME +! H5Adelete_by_name_f +! +! PURPOSE +! Removes an attribute from a specified location +! +! INPUTS +! loc_id - Identifer for object to which attribute is attached +! obj_name - Name of attribute to open +! attr_name - Attribute access property list +! lapl_id - Link access property list +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Adelete_by_name_f(loc_id, obj_name, attr_name, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, + ! from which attribute is to be removed + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Name of attribute to delete + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER(SIZE_T) :: attr_namelen + INTEGER(SIZE_T) :: obj_namelen + + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Adelete_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default) & + BIND(C,NAME='h5adelete_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: attr_namelen + INTEGER(SIZE_T) :: obj_namelen + END FUNCTION H5Adelete_by_name_c + END INTERFACE + + obj_namelen = LEN(obj_name) + attr_namelen = LEN(attr_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Adelete_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default) + + END SUBROUTINE H5Adelete_by_name_f + +! +!****s* H5A/H5Aopen_by_idx_f +! +! NAME +! H5Aopen_by_idx_f +! +! PURPOSE +! Opens an existing attribute that is attached to an object specified by location and name +! +! INPUTS +! loc_id - Location of object to which attribute is attached +! obj_name - Name of object to which attribute is attached, relative to location +! idx_type - Type of index +! order - Index traversal order +! n - Attribute’s position in index +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! aapl_id - Attribute access property list +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aopen_by_idx_f(loc_id, obj_name, idx_type, order, n, attr_id, hdferr, aapl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached + INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + + INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index + + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER(SIZE_T) :: obj_namelen + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Aopen_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, & + aapl_id_default, lapl_id_default, attr_id) BIND(C,NAME='h5aopen_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER, INTENT(IN) :: idx_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: obj_namelen + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + END FUNCTION H5Aopen_by_idx_c + END INTERFACE + + obj_namelen = LEN(obj_name) + + aapl_id_default = H5P_DEFAULT_F + IF(PRESENT(aapl_id)) aapl_id_default = aapl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Aopen_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, & + aapl_id_default, lapl_id_default, attr_id) + + END SUBROUTINE H5Aopen_by_idx_f + +! +!****s* H5A/H5Aget_info_f +! +! NAME +! H5Aget_info_f +! +! PURPOSE +! Retrieves attribute information, by attribute identifier +! +! INPUTS +! attr_id - attribute identifier +! +! OUTPUTS +! NOTE: In C it is defined as a structure: H5A_info_t +! +! corder_valid - indicates whether the creation order data is valid for this attribute +! corder - is a positive integer containing the creation order of the attribute +! cset - indicates the character set used for the attribute’s name +! data_size - indicates the size, in the number of characters, of the attribute +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! SOURCE + SUBROUTINE H5Aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute + INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute + INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name + INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTEGER :: corder_valid + + INTERFACE + INTEGER FUNCTION H5Aget_info_c(attr_id, corder_valid, corder, cset, data_size) BIND(C,NAME='h5aget_info_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id + + INTEGER, INTENT(OUT) :: corder_valid + INTEGER, INTENT(OUT) :: corder + INTEGER, INTENT(OUT) :: cset + INTEGER(HSIZE_T), INTENT(OUT) :: data_size + END FUNCTION H5Aget_info_c + END INTERFACE + + hdferr = H5Aget_info_c(attr_id, corder_valid, corder, cset, data_size) + + f_corder_valid =.FALSE. + IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. + + + END SUBROUTINE H5Aget_info_f + +! +!****s* H5A/H5Aget_info_by_idx_f +! +! NAME +! H5Aget_info_by_idx_f +! +! PURPOSE +! Retrieves attribute information, by attribute index position +! +! INPUTS +! loc_id - Location of object to which attribute is attached +! obj_name - Name of object to which attribute is attached, relative to location +! idx_type - Type of index +! order - Index traversal order +! n - Attribute’s position in index +! +! OUTPUTS NOTE: In C it is defined as a structure: H5A_info_t +! corder_valid - indicates whether the creation order data is valid for this attribute +! corder - is a positive integer containing the creation order of the attribute +! cset - indicates the character set used for the attribute’s name +! data_size - indicates the size, in the number of characters, of the attribute +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aget_info_by_idx_f(loc_id, obj_name, idx_type, order, n, & + f_corder_valid, corder, cset, data_size, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached + INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + + INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index + + + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute + INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute + INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name + INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER :: corder_valid + INTEGER(SIZE_T) :: obj_namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5aget_info_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default, & + corder_valid, corder, cset, data_size) BIND(C,NAME='h5aget_info_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER, INTENT(IN) :: idx_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) :: lapl_id_default + INTEGER, INTENT(OUT) :: corder_valid + INTEGER, INTENT(OUT) :: corder + INTEGER, INTENT(OUT) :: cset + INTEGER(HSIZE_T), INTENT(OUT) :: data_size + + INTEGER(SIZE_T) :: obj_namelen + END FUNCTION H5Aget_info_by_idx_c + END INTERFACE + + obj_namelen = LEN(obj_name) + + lapl_id_default = H5P_DEFAULT_F + IF(present(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Aget_info_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default, & + corder_valid, corder, cset, data_size) + + f_corder_valid =.FALSE. + IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. + + END SUBROUTINE H5Aget_info_by_idx_f + +! +!****s* H5A/H5Aget_info_by_name_f +! +! NAME +! H5Aget_info_by_name_f +! +! PURPOSE +! Retrieves attribute information, by attribute name +! +! INPUTS +! loc_id - Location of object to which attribute is attached +! obj_name - Name of object to which attribute is attached, relative to location +! attr_name - Attribute name +! +! OUTPUTS NOTE: In C it is defined as a structure: H5A_info_t +! corder_valid - indicates whether the creation order data is valid for this attribute +! corder - is a positive integer containing the creation order of the attribute +! cset - indicates the character set used for the attribute’s name +! data_size - indicates the size, in the number of characters, of the attribute +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE H5Aget_info_by_name_f(loc_id, obj_name, attr_name, & + f_corder_valid, corder, cset, data_size, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name + + + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute + INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute + INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name + INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER :: corder_valid + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: attr_namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Aget_info_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, & + corder_valid, corder, cset, data_size) BIND(C,NAME='h5aget_info_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(SIZE_T), INTENT(IN) :: obj_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(SIZE_T), INTENT(IN) :: attr_namelen + INTEGER(HID_T) :: lapl_id_default + INTEGER, INTENT(OUT) :: corder_valid + INTEGER, INTENT(OUT) :: corder + INTEGER, INTENT(OUT) :: cset + INTEGER(HSIZE_T), INTENT(OUT) :: data_size + + END FUNCTION H5Aget_info_by_name_c + END INTERFACE + + obj_namelen = LEN(obj_name) + attr_namelen = LEN(attr_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Aget_info_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, & + corder_valid, corder, cset, data_size) + + f_corder_valid =.FALSE. + IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. + + END SUBROUTINE H5Aget_info_by_name_f + +! +!****s* H5A/H5Acreate_by_name_f +! +! NAME +! H5Acreate_by_name_f +! +! PURPOSE +! Creates an attribute attached to a specified object +! +! INPUTS +! loc_id - Location or object identifier; may be dataset or group +! obj_name - Name, relative to loc_id, of object that attribute is to be attached to +! attr_name - Attribute name +! type_id - Attribute datatype identifier +! space_id - Attribute dataspace identifier +! +! OUTPUTS +! attr - an attribute identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! acpl_id - Attribute creation property list identifier (Currently not used.) +! aapl_id - Attribute access property list identifier (Currently not used.) +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! SOURCE + SUBROUTINE H5Acreate_by_name_f(loc_id, obj_name, attr_name, type_id, space_id, attr, hdferr, & + acpl_id, aapl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: obj_name + CHARACTER(LEN=*), INTENT(IN) :: attr_name + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(OUT) :: attr + INTEGER, INTENT(OUT) :: hdferr + + INTEGER(HID_T), INTENT(IN), OPTIONAL :: acpl_id + INTEGER(HID_T), INTENT(IN), OPTIONAL :: aapl_id + INTEGER(HID_T), INTENT(IN), OPTIONAL :: lapl_id +!***** + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: attr_namelen + + INTEGER(HID_T) :: acpl_id_default + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Acreate_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & + type_id, space_id, acpl_id_default, aapl_id_default, lapl_id_default, attr) & + BIND(C,NAME='h5acreate_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(SIZE_T), INTENT(IN) :: obj_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(SIZE_T), INTENT(IN) :: attr_namelen + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T) :: acpl_id_default + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + INTEGER(HID_T), INTENT(OUT) :: attr + + END FUNCTION H5Acreate_by_name_c + END INTERFACE + + obj_namelen = LEN(obj_name) + attr_namelen = LEN(attr_name) + + acpl_id_default = H5P_DEFAULT_F + aapl_id_default = H5P_DEFAULT_F + lapl_id_default = H5P_DEFAULT_F + + IF(PRESENT(acpl_id)) acpl_id_default = acpl_id + IF(PRESENT(aapl_id)) aapl_id_default = aapl_id + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Acreate_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & + type_id, space_id, acpl_id_default, aapl_id_default, lapl_id_default, attr) + END SUBROUTINE H5Acreate_by_name_f + +! +!****s* H5A/H5Aexists_f +! +! NAME +! H5Aexists_f +! +! PURPOSE +! Determines whether an attribute with a given name exists on an object +! +! INPUTS +! obj_id - Object identifier +! attr_name - Attribute name +! +! OUTPUTS +! attr_exists - attribute exists status +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! +! SOURCE + SUBROUTINE H5Aexists_f(obj_id, attr_name, attr_exists, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name + LOGICAL, INTENT(OUT) :: attr_exists ! .TRUE. if exists, .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTEGER(HID_T) :: attr_exists_c + INTEGER(SIZE_T) :: attr_namelen + + INTERFACE + INTEGER FUNCTION H5Aexists_c(obj_id, attr_name, attr_namelen, attr_exists_c) BIND(C,NAME='h5aexists_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(SIZE_T) :: attr_namelen + INTEGER(HID_T) :: attr_exists_c + END FUNCTION H5Aexists_c + END INTERFACE + + attr_namelen = LEN(attr_name) + + hdferr = H5Aexists_c(obj_id, attr_name, attr_namelen, attr_exists_c) + + attr_exists = .FALSE. + IF(attr_exists_c.GT.0) attr_exists = .TRUE. + + END SUBROUTINE H5Aexists_f + +! +!****s* H5A/H5Aexists_by_name_f +! +! NAME +! H5Aexists_by_name_f +! +! PURPOSE +! Determines whether an attribute with a given name exists on an object +! +! INPUTS +! loc_id - Location identifier +! obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) +! attr_name - Attribute name +! +! OUTPUTS +! attr_exists - attribute exists status +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list identifier +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! +! SOURCE + SUBROUTINE H5Aexists_by_name_f(loc_id, obj_name, attr_name, attr_exists, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id, + ! absolute from the file’s root group, or '.' + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name + LOGICAL, INTENT(OUT) :: attr_exists ! .TRUE. if exists, .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier +!***** + INTEGER :: attr_exists_c + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: attr_namelen + + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION H5Aexists_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & + lapl_id_default, attr_exists_c) BIND(C,NAME='h5aexists_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(SIZE_T), INTENT(IN) :: obj_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(SIZE_T), INTENT(IN) :: attr_namelen + INTEGER(HID_T), INTENT(IN) :: lapl_id_default + INTEGER, INTENT(OUT) :: attr_exists_c + END FUNCTION H5Aexists_by_name_c + END INTERFACE + + attr_namelen = LEN(attr_name) + obj_namelen = LEN(obj_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Aexists_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, attr_exists_c) + + attr_exists = .FALSE. + IF(attr_exists_c.GT.0) attr_exists = .TRUE. + + END SUBROUTINE H5Aexists_by_name_f +! +!****s* H5A/H5Aopen_by_name_f +! +! NAME +! H5Aopen_by_name_f +! +! PURPOSE +! Opens an attribute for an object by object name and attribute name. +! +! INPUTS +! loc_id - Location from which to find object to which attribute is attached +! obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) +! attr_name - Attribute name +! +! OUTPUTS +! attr_id - attribute identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! aapl_id - Attribute access property list (Currently unused; should be passed in as H5P_DEFAULT.) +! lapl_id - Link access property list identifier +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! SOURCE + SUBROUTINE H5Aopen_by_name_f(loc_id, obj_name, attr_name, attr_id, hdferr, aapl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id, + ! absolute from the file’s root group, or '.' + CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name + INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list + ! (Currently unused; should be passed in as H5P_DEFAULT_F) + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier +!***** + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: attr_namelen + + INTERFACE + INTEGER FUNCTION H5Aopen_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & + aapl_id_default, lapl_id_default, attr_id) BIND(C,NAME='h5aopen_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(SIZE_T), INTENT(IN) :: obj_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: attr_name + INTEGER(SIZE_T), INTENT(IN) :: attr_namelen + INTEGER(HID_T) :: aapl_id_default + INTEGER(HID_T) :: lapl_id_default + INTEGER(HID_T), INTENT(OUT) :: attr_id + END FUNCTION H5Aopen_by_name_c + END INTERFACE + + attr_namelen = LEN(attr_name) + obj_namelen = LEN(obj_name) + + aapl_id_default = H5P_DEFAULT_F + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(aapl_id)) aapl_id_default = aapl_id + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = H5Aopen_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & + aapl_id_default, lapl_id_default, attr_id) + + END SUBROUTINE H5Aopen_by_name_f + +! +!****s* H5A/H5Arename_f +! +! NAME +! H5Arename_f +! +! PURPOSE +! Renames an attribute +! +! INPUTS +! loc_id - Location or object identifier; may be dataset or group +! old_attr_name - Prior attribute name +! new_attr_name - New attribute name +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! HISTORY +! N/A +! +! + +! SOURCE + SUBROUTINE H5Arename_f(loc_id, old_attr_name, new_attr_name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier + CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name + CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTEGER(SIZE_T) :: old_attr_namelen + INTEGER(SIZE_T) :: new_attr_namelen + + INTERFACE + INTEGER FUNCTION H5Arename_c(loc_id, & + old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen) BIND(C,NAME='h5arename_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: old_attr_name + INTEGER(SIZE_T) :: old_attr_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_attr_name + INTEGER(SIZE_T) :: new_attr_namelen + END FUNCTION H5Arename_c + END INTERFACE + + old_attr_namelen = LEN(old_attr_name) + new_attr_namelen = LEN(new_attr_name) + + hdferr = H5Arename_c(loc_id, & + old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen) + + END SUBROUTINE H5Arename_f + + SUBROUTINE H5Awrite_char_scalar(attr_id, memtype_id, buf, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype + ! identifier (in memory) + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes + CHARACTER(LEN=*), INTENT(IN) :: buf ! Attribute data + INTEGER, INTENT(OUT) :: hdferr ! Error code + + CALL H5Awrite_char_scalar_fix(attr_id, memtype_id, buf, LEN(buf), dims, hdferr) + + END SUBROUTINE H5Awrite_char_scalar + + SUBROUTINE H5Awrite_char_scalar_fix(attr_id, memtype_id, buf, buf_len, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype + ! identifier (in memory) + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes + INTEGER, INTENT(IN) :: buf_len + CHARACTER(LEN=buf_len), INTENT(IN), TARGET :: buf ! Attribute data + INTEGER, INTENT(OUT) :: hdferr ! Error code + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1:1)) + + hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr) + + END SUBROUTINE H5Awrite_char_scalar_fix + + +!****s* H5A (F03)/H5Awrite_f_F03 +! +! NAME +! H5Awrite_f_F03 +! +! PURPOSE +! Writes an attribute. +! +! Inputs: +! attr_id - Attribute identifier +! memtype_id - Attribute datatype identifier (in memory) +! buf - Data buffer; may be a scalar or an array +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! NOTES +! This function is overloaded to write INTEGER, +! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers +! up to 7 dimensions. +! +! Fortran2003 Interface: +!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: attr_id +!! INTEGER(HID_T) , INTENT(IN) :: memtype_id +!! TYPE(C_PTR) , INTENT(IN) :: buf +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE H5Awrite_ptr(attr_id, mem_type_id, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + TYPE(C_PTR), INTENT(IN), TARGET :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + + hdferr = H5Awrite_f_c(attr_id, mem_type_id, buf) + + END SUBROUTINE H5Awrite_ptr + + SUBROUTINE H5Aread_char_scalar(attr_id, memtype_id, buf, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype + ! identifier (in memory) + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes + CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Attribute data + INTEGER, INTENT(OUT) :: hdferr ! Error code + + CALL H5Aread_char_scalar_fix(attr_id, memtype_id, buf, LEN(buf), hdferr) + + END SUBROUTINE H5Aread_char_scalar + + SUBROUTINE H5Aread_char_scalar_fix(attr_id, memtype_id, buf, buf_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype + ! identifier (in memory) + INTEGER, INTENT(IN) :: buf_len + CHARACTER(LEN=buf_len), INTENT(INOUT), TARGET :: buf ! Attribute data + INTEGER, INTENT(OUT) :: hdferr ! Error code + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1:1)) + + hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr) + + END SUBROUTINE H5Aread_char_scalar_fix + +!****s* H5A (F03)/H5Aread_f_F03 +! +! NAME +! H5Aread_f_F03 +! +! PURPOSE +! Reads an attribute. +! +! Inputs: +! attr_id - Attribute identifier +! memtype_id - Attribute datatype identifier (in memory) +! +! Outputs: +! buf - Data buffer; may be a scalar or an array +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! dims parameter was added to make code portable; +! Aprile 4, 2001 +! +! Changed buf intent to INOUT to be consistant +! with how the C functions handles it. The pg +! compiler will return 0 if a buf value is not set. +! February, 2008 +! +! NOTES +! This function is overloaded to write INTEGER, +! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers +! up to 7 dimensions. +! Fortran2003 Interface: +!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: attr_id +!! INTEGER(HID_T) , INTENT(IN) :: memtype_id +!! TYPE(C_PTR) , INTENT(INOUT) :: buf +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE H5Aread_ptr(attr_id, mem_type_id, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + TYPE(C_PTR), INTENT(INOUT), TARGET :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + + hdferr = H5Aread_f_c(attr_id, mem_type_id, buf) + + END SUBROUTINE H5Aread_ptr + +END MODULE H5A + + diff --git a/fortran/src/H5Aff.f90 b/fortran/src/H5Aff.f90 deleted file mode 100644 index 25f7fa7..0000000 --- a/fortran/src/H5Aff.f90 +++ /dev/null @@ -1,1673 +0,0 @@ -!****h* ROBODoc/H5A -! -! NAME -! MODULE H5A -! -! PURPOSE -! This file contains Fortran interfaces for H5A functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5A function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5A - - USE H5GLOBAL -! -! On Windows there are no big (integer*8) integers, so overloading -! for bug #670 does not work. I have to use DEC compilation directives to make -! Windows DEC Visual Fortran and OSF compilers happy and do right things. -! 05/01/02 EP -! - -CONTAINS - -! -!****s* H5A/h5acreate_f -! -! NAME -! h5acreate_f -! -! PURPOSE -! Creates a dataset as an attribute of a group, dataset, or named datatype -! -! INPUTS -! loc_id - identifier of an object (group, dataset, -! or named datatype) attribute is attached to -! name - attribute name -! type_id - attribute datatype identifier -! space_id - attribute dataspace identifier -! -! OUTPUTS -! attr_id - attribute identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! acpl_id - Attribute creation property list identifier -! appl_id - Attribute access property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! -! SOURCE - SUBROUTINE h5acreate_f(loc_id, name, type_id, space_id, attr_id, & - hdferr, acpl_id, aapl_id ) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name - INTEGER(HID_T), INTENT(IN) :: type_id ! Attribute datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Attribute dataspace identifier - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: acpl_id ! Attribute creation property list identifier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list identifier - - INTEGER(HID_T) :: acpl_id_default - INTEGER(HID_T) :: aapl_id_default - INTEGER(SIZE_T) :: namelen - INTERFACE - INTEGER FUNCTION h5acreate_c(loc_id, name, namelen, type_id, & - space_id, acpl_id_default, aapl_id_default, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ACREATE_C'::h5acreate_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T) :: acpl_id_default - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T), INTENT(OUT) :: attr_id - END FUNCTION h5acreate_c - END INTERFACE - - acpl_id_default = H5P_DEFAULT_F - aapl_id_default = H5P_DEFAULT_F - namelen = LEN(name) - IF (PRESENT(acpl_id)) acpl_id_default = acpl_id - IF (PRESENT(aapl_id)) aapl_id_default = aapl_id - - hdferr = h5acreate_c(loc_id, name, namelen, type_id, space_id, & - acpl_id_default, aapl_id_default, attr_id) - - END SUBROUTINE h5acreate_f - - -! -!****s* H5A/h5aopen_name_f -! -! NAME -! h5aopen_name_f -! -! PURPOSE -! Opens an attribute specified by name. -! -! INPUTS -! obj_id - identifier of a group, dataset, or named -! datatype atttribute to be attached to -! name - attribute name -! OUTPUTS -! attr_id - attribute identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! SOURCE - SUBROUTINE h5aopen_name_f(obj_id, name, attr_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5aopen_name_c(obj_id, name, namelen, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AOPEN_NAME_C'::h5aopen_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T), INTENT(OUT) :: attr_id - END FUNCTION h5aopen_name_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5aopen_name_c(obj_id, name, namelen, attr_id) - END SUBROUTINE h5aopen_name_f -! -!****s* H5A/h5aopen_idx_f -! -! NAME -! h5aopen_idx_f -! -! PURPOSE -! Opens the attribute specified by its index. -! -! INPUTS -! obj_id - identifier of a group, dataset, or named -! datatype an attribute to be attached to -! index - index of the attribute to open (zero-based) -! OUTPUTS -! attr_id - attribute identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! SOURCE - SUBROUTINE h5aopen_idx_f(obj_id, index, attr_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(IN) :: index ! Attribute index - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5aopen_idx_c(obj_id, index, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AOPEN_IDX_C'::h5aopen_idx_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(IN) :: index - INTEGER(HID_T), INTENT(OUT) :: attr_id - END FUNCTION h5aopen_idx_c - END INTERFACE - - hdferr = h5aopen_idx_c(obj_id, index, attr_id) - END SUBROUTINE h5aopen_idx_f -! -!****s* H5A/h5aget_space_f -! -! NAME -! h5aget_space_f -! -! PURPOSE -! Gets a copy of the dataspace for an attribute. -! -! INPUTS -! attr_id - attribute identifier -! -! OUTPUTS -! space_id - attribite dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! -! SOURCE - SUBROUTINE h5aget_space_f(attr_id, space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(OUT) :: space_id ! Attribute dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5aget_space_c(attr_id, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_SPACE_C'::h5aget_space_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5aget_space_c - END INTERFACE - - hdferr = h5aget_space_c(attr_id, space_id) - END SUBROUTINE h5aget_space_f -! -!****s* H5A/h5aget_type_f -! -! NAME -! h5aget_type_f -! -! PURPOSE -! Gets an attribute datatype. -! -! INPUTS -! attr_id - attribute identifier -! OUTPUTS -! type_id - attribute datatype identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! SOURCE - SUBROUTINE h5aget_type_f(attr_id, type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(OUT) :: type_id ! Attribute datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5aget_type_c(attr_id, type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_TYPE_C'::h5aget_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(OUT) :: type_id - END FUNCTION h5aget_type_c - END INTERFACE - - hdferr = h5aget_type_c(attr_id, type_id) - END SUBROUTINE h5aget_type_f -! -!****s* H5A/h5aget_name_f -! -! NAME -! h5aget_name_f -! -! PURPOSE -! Gets an attribute name. -! -! INPUTS -! attr_id - attribute identifier -! size - size of a buffer to read name in -! OUTPUTS -! buf - buffer to read name in -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! -! SOURCE - SUBROUTINE h5aget_name_f(attr_id, size, buf, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size - CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Buffer to hold attribute name - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! name length is successful, -1 if fail -!***** - INTERFACE - INTEGER FUNCTION h5aget_name_c(attr_id, size, buf) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_NAME_C'::h5aget_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(SIZE_T), INTENT(IN) :: size - CHARACTER(LEN=*), INTENT(OUT) :: buf - END FUNCTION h5aget_name_c - END INTERFACE - - hdferr = h5aget_name_c(attr_id, size, buf) - END SUBROUTINE h5aget_name_f - -! -!****s* H5A/h5aget_name_by_idx_f -! -! NAME -! h5aget_name_by_idx_f -! -! PURPOSE -! Gets an attribute name, by attribute index position. -! -! INPUTS -! loc_id - Location of object to which attribute is attached -! obj_name - Name of object to which attribute is attached, relative to location -! idx_type - Type of index; Possible values are: -! H5_INDEX_UNKNOWN_F = -1 - Unknown index type -! H5_INDEX_NAME_F - Index on names -! H5_INDEX_CRT_ORDER_F - Index on creation order -! H5_INDEX_N_F - Number of indices defined -! -! order - Order in which to iterate over index; Possible values are: -! H5_ITER_UNKNOWN_F - Unknown order -! H5_ITER_INC_F - Increasing order -! H5_ITER_DEC_F - Decreasing order -! H5_ITER_NATIVE_F - No particular order, whatever is fastest -! H5_ITER_N_F - Number of iteration orders -! order - Index traversal order -! n - Attribute’s position in index -! -! OUTPUTS -! name - Attribute name -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! size - Size, in bytes, of attribute name -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aget_name_by_idx_f(loc_id, obj_name, idx_type, order, & - n, name, hdferr, size, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, - ! from which attribute is to be removed *TEST* check NULL - INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - ! H5_ITER_N_F - Number of iteration orders - INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index - CHARACTER(LEN=*), INTENT(OUT) :: name ! Attribute name - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! Returns attribute name size, - ! -1 if fail - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, - ! of the attribute -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: size_default - - INTERFACE - INTEGER FUNCTION h5aget_name_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, & - n, name, size_default, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_NAME_BY_IDX_C'::h5aget_name_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER, INTENT(IN) :: idx_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER(SIZE_T) :: size_default - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: obj_namelen - END FUNCTION h5aget_name_by_idx_c - END INTERFACE - - obj_namelen = LEN(obj_name) - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - size_default = LEN(name) - - hdferr = h5aget_name_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, & - n, name, size_default, lapl_id_default) - - IF(PRESENT(size)) size = size_default - - - END SUBROUTINE h5aget_name_by_idx_f -! -!****s* H5A/h5aget_num_attrs_f -! -! NAME -! h5aget_num_attrs_f -! -! PURPOSE -! Determines the number of attributes attached to an object. -! -! INPUTS -! obj_id - object (group, dataset, or named datatype) -! identifier -! OUTPUTS -! attr_num - number of attributes attached to the object -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! SOURCE - SUBROUTINE h5aget_num_attrs_f(obj_id, attr_num, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: attr_num ! Number of attributes of the object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5aget_num_attrs_c(obj_id, attr_num) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_NUM_ATTRS_C'::h5aget_num_attrs_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(OUT) :: attr_num - END FUNCTION h5aget_num_attrs_c - END INTERFACE - - hdferr = h5aget_num_attrs_c(obj_id, attr_num) - END SUBROUTINE h5aget_num_attrs_f - -! -!****s* H5A/h5adelete_f -! -! NAME -! h5adelete_f -! -! PURPOSE -! Deletes an attribute of an object (group, dataset or -! named datatype) -! -! INPUTS -! obj_id - object identifier -! name - attribute name -! OUTPUTS -! -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! SOURCE - SUBROUTINE h5adelete_f(obj_id, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Attribute name - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5adelete_c(obj_id, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ADELETE_C'::h5adelete_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) :: namelen - END FUNCTION h5adelete_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5adelete_c(obj_id, name, namelen) - END SUBROUTINE h5adelete_f - -! -!****s* H5A/h5aclose_f -! -! NAME -! h5aclose_f -! -! PURPOSE -! Closes the specified attribute. -! -! INPUTS -! attr_id - attribute identifier -! OUTPUTS -! -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! SOURCE - SUBROUTINE h5aclose_f(attr_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5aclose_c(attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ACLOSE_C'::h5aclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - END FUNCTION h5aclose_c - END INTERFACE - - hdferr = h5aclose_c(attr_id) - END SUBROUTINE h5aclose_f - -! -!****s* H5A/h5aget_storage_size_f -! -! NAME -! h5aget_storage_size_f -! -! PURPOSE -! Returns the amount of storage required for an attribute. -! -! INPUTS -! attr_id - attribute identifier -! OUTPUTS -! size - attribute storage size -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aget_storage_size_f(attr_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Attribute storage requirement - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5aget_storage_size_c(attr_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_STORAGE_SIZE_C'::h5aget_storage_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5aget_storage_size_c - END INTERFACE - - hdferr = h5aget_storage_size_c(attr_id, size) - END SUBROUTINE h5aget_storage_size_f - -! -!****s* H5A/h5aget_create_plist_f -! -! NAME -! h5aget_create_plist_f -! -! PURPOSE -! Gets an attribute creation property list identifier -! -! INPUTS -! attr_id - Identifier of the attribute -! OUTPUTS -! creation_prop_id - Identifier for the attribute’s creation property -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aget_create_plist_f(attr_id, creation_prop_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Identifier of the attribute - INTEGER(HID_T), INTENT(OUT) :: creation_prop_id ! Identifier for the attribute’s creation property - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5aget_create_plist_c(attr_id, creation_prop_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_CREATE_PLIST_C'::h5aget_create_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(OUT) :: creation_prop_id - END FUNCTION h5aget_create_plist_c - END INTERFACE - - hdferr = h5aget_create_plist_c(attr_id, creation_prop_id) - END SUBROUTINE h5aget_create_plist_f - -! -!****s* H5A/h5arename_by_name_f -! -! NAME -! h5arename_by_name_f -! -! PURPOSE -! Renames an attribute -! -! INPUTS -! loc_id - Location or object identifier; may be dataset or group -! obj_name - Name of object, relative to location, -! whose attribute is to be renamed -! old_attr_name - Prior attribute name -! new_attr_name - New attribute name -! lapl_id - Link access property list identifier -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5arename_by_name_f(loc_id, obj_name, old_attr_name, new_attr_name, & - hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, - ! whose attribute is to be renamed - CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name - CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name - - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: old_attr_namelen - INTEGER(SIZE_T) :: new_attr_namelen - - INTERFACE - INTEGER FUNCTION h5arename_by_name_c(loc_id, obj_name, obj_namelen, & - old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen, & - lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ARENAME_BY_NAME_C'::h5arename_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, old_attr_name, new_attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(SIZE_T) :: obj_namelen - CHARACTER(LEN=*), INTENT(IN) :: old_attr_name - INTEGER(SIZE_T) :: old_attr_namelen - CHARACTER(LEN=*), INTENT(IN) :: new_attr_name - INTEGER(SIZE_T) :: new_attr_namelen - INTEGER(HID_T) :: lapl_id_default - - END FUNCTION h5arename_by_name_c - END INTERFACE - - obj_namelen = LEN(obj_name) - old_attr_namelen = LEN(old_attr_name) - new_attr_namelen = LEN(new_attr_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default=lapl_id - - hdferr = h5arename_by_name_c(loc_id, obj_name, obj_namelen, & - old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen, & - lapl_id_default) - - END SUBROUTINE h5arename_by_name_f - -! -!****s* H5A/h5aopen_f -! -! NAME -! h5aopen_f -! -! PURPOSE -! Opens an attribute for an object specified by object -! identifier and attribute name -! -! INPUTS -! obj_id - Identifer for object to which attribute is attached -! attr_name - Name of attribute to open -! OUTPUTS -! attr_id - attribute identifier - -! OPTIONAL PARAMETERS -! aapl_id - Attribute access property list -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aopen_f(obj_id, attr_name, attr_id, hdferr, aapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! Success: 0 - ! Failure: -1 - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list -!***** - INTEGER(HID_T) :: aapl_id_default - - INTEGER(SIZE_T) :: attr_namelen - - INTERFACE - INTEGER FUNCTION h5aopen_c(obj_id, attr_name, attr_namelen, aapl_id_default, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AOPEN_C'::h5aopen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(HID_T) :: aapl_id_default - INTEGER(SIZE_T) :: attr_namelen - INTEGER(HID_T), INTENT(OUT) :: attr_id - END FUNCTION h5aopen_c - END INTERFACE - - attr_namelen = LEN(attr_name) - - aapl_id_default = H5P_DEFAULT_F - IF(PRESENT(aapl_id)) aapl_id_default = aapl_id - - hdferr = h5aopen_c(obj_id, attr_name, attr_namelen, aapl_id_default, attr_id) - - END SUBROUTINE h5aopen_f - -! -!****s* H5A/h5adelete_by_idx_f -! -! NAME -! h5adelete_by_idx_f -! -! PURPOSE -! Deletes an attribute from an object according to index order -! -! INPUTS -! loc_id - Location or object identifier; may be dataset or group -! obj_name - Name of object, relative to location, from which attribute is to be removed -! idx_type - Type of index; Possible values are: -! H5_INDEX_UNKNOWN_F = -1 - Unknown index type -! H5_INDEX_NAME_F - Index on names -! H5_INDEX_CRT_ORDER_F - Index on creation order -! H5_INDEX_N_F - Number of indices defined -! -! order - Order in which to iterate over index; Possible values are: -! H5_ITER_UNKNOWN_F - Unknown order -! H5_ITER_INC_F - Increasing order -! H5_ITER_DEC_F - Decreasing order -! H5_ITER_NATIVE_F - No particular order, whatever is fastest -! H5_ITER_N_F - Number of iteration orders -! -! n - Offset within index -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5adelete_by_idx_f(loc_id, obj_name, idx_type, order, n, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, - ! from which attribute is to be removed - INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - ! H5_ITER_N_F - Number of iteration orders - INTEGER(HSIZE_T), INTENT(IN) :: n ! Offset within index - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER(SIZE_T) :: obj_namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5adelete_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ADELETE_BY_IDX_C'::h5adelete_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER, INTENT(IN) :: idx_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: obj_namelen - END FUNCTION h5adelete_by_idx_c - END INTERFACE - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - obj_namelen = LEN(obj_name) - hdferr = h5adelete_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default) - - END SUBROUTINE h5adelete_by_idx_f - -! -!****s* H5A/h5adelete_by_name_f -! -! NAME -! h5adelete_by_name_f -! -! PURPOSE -! Removes an attribute from a specified location -! -! INPUTS -! loc_id - Identifer for object to which attribute is attached -! obj_name - Name of attribute to open -! attr_name - Attribute access property list -! lapl_id - Link access property list -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5adelete_by_name_f(loc_id, obj_name, attr_name, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object, relative to location, - ! from which attribute is to be removed - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Name of attribute to delete - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER(SIZE_T) :: attr_namelen - INTEGER(SIZE_T) :: obj_namelen - - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5adelete_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ADELETE_BY_NAME_C'::h5adelete_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: attr_namelen - INTEGER(SIZE_T) :: obj_namelen - END FUNCTION h5adelete_by_name_c - END INTERFACE - - obj_namelen = LEN(obj_name) - attr_namelen = LEN(attr_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5adelete_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default) - - END SUBROUTINE h5adelete_by_name_f - -! -!****s* H5A/h5aopen_by_idx_f -! -! NAME -! h5aopen_by_idx_f -! -! PURPOSE -! Opens an existing attribute that is attached to an object specified by location and name -! -! INPUTS -! loc_id - Location of object to which attribute is attached -! obj_name - Name of object to which attribute is attached, relative to location -! idx_type - Type of index -! order - Index traversal order -! n - Attribute’s position in index -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! aapl_id - Attribute access property list -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aopen_by_idx_f(loc_id, obj_name, idx_type, order, n, attr_id, hdferr, aapl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached - INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - - INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index - - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER(SIZE_T) :: obj_namelen - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5aopen_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, & - aapl_id_default, lapl_id_default, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AOPEN_BY_IDX_C'::h5aopen_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER, INTENT(IN) :: idx_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: obj_namelen - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - END FUNCTION h5aopen_by_idx_c - END INTERFACE - - obj_namelen = LEN(obj_name) - - aapl_id_default = H5P_DEFAULT_F - IF(PRESENT(aapl_id)) aapl_id_default = aapl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5aopen_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, & - aapl_id_default, lapl_id_default, attr_id) - - END SUBROUTINE h5aopen_by_idx_f - -! -!****s* H5A/h5aget_info_f -! -! NAME -! h5aget_info_f -! -! PURPOSE -! Retrieves attribute information, by attribute identifier -! -! INPUTS -! attr_id - attribute identifier -! -! OUTPUTS -! NOTE: In C it is defined as a structure: H5A_info_t -! -! corder_valid - indicates whether the creation order data is valid for this attribute -! corder - is a positive integer containing the creation order of the attribute -! cset - indicates the character set used for the attribute’s name -! data_size - indicates the size, in the number of characters, of the attribute -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! SOURCE - SUBROUTINE h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute - INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute - INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name - INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER :: corder_valid - - INTERFACE - INTEGER FUNCTION h5aget_info_c(attr_id, corder_valid, corder, cset, data_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_INFO_C'::h5aget_info_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: attr_id - - INTEGER, INTENT(OUT) :: corder_valid - INTEGER, INTENT(OUT) :: corder - INTEGER, INTENT(OUT) :: cset - INTEGER(HSIZE_T), INTENT(OUT) :: data_size - END FUNCTION h5aget_info_c - END INTERFACE - - hdferr = h5aget_info_c(attr_id, corder_valid, corder, cset, data_size) - - f_corder_valid =.FALSE. - IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. - - - END SUBROUTINE h5aget_info_f - -! -!****s* H5A/h5aget_info_by_idx_f -! -! NAME -! h5aget_info_by_idx_f -! -! PURPOSE -! Retrieves attribute information, by attribute index position -! -! INPUTS -! loc_id - Location of object to which attribute is attached -! obj_name - Name of object to which attribute is attached, relative to location -! idx_type - Type of index -! order - Index traversal order -! n - Attribute’s position in index -! -! OUTPUTS NOTE: In C it is defined as a structure: H5A_info_t -! corder_valid - indicates whether the creation order data is valid for this attribute -! corder - is a positive integer containing the creation order of the attribute -! cset - indicates the character set used for the attribute’s name -! data_size - indicates the size, in the number of characters, of the attribute -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aget_info_by_idx_f(loc_id, obj_name, idx_type, order, n, & - f_corder_valid, corder, cset, data_size, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached - INTEGER, INTENT(IN) :: idx_type ! Type of index; Possible values are: - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - - INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index - - - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute - INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute - INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name - INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER :: corder_valid - INTEGER(SIZE_T) :: obj_namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5aget_info_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default, & - corder_valid, corder, cset, data_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_INFO_BY_IDX_C'::h5aget_info_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER, INTENT(IN) :: idx_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) :: lapl_id_default - INTEGER, INTENT(OUT) :: corder_valid - INTEGER, INTENT(OUT) :: corder - INTEGER, INTENT(OUT) :: cset - INTEGER(HSIZE_T), INTENT(OUT) :: data_size - - INTEGER(SIZE_T) :: obj_namelen - END FUNCTION h5aget_info_by_idx_c - END INTERFACE - - obj_namelen = LEN(obj_name) - - lapl_id_default = H5P_DEFAULT_F - IF(present(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5aget_info_by_idx_c(loc_id, obj_name, obj_namelen, idx_type, order, n, lapl_id_default, & - corder_valid, corder, cset, data_size) - - f_corder_valid =.FALSE. - IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. - - END SUBROUTINE h5aget_info_by_idx_f - -! -!****s* H5A/h5aget_info_by_name_f -! -! NAME -! h5aget_info_by_name_f -! -! PURPOSE -! Retrieves attribute information, by attribute name -! -! INPUTS -! loc_id - Location of object to which attribute is attached -! obj_name - Name of object to which attribute is attached, relative to location -! attr_name - Attribute name -! -! OUTPUTS NOTE: In C it is defined as a structure: H5A_info_t -! corder_valid - indicates whether the creation order data is valid for this attribute -! corder - is a positive integer containing the creation order of the attribute -! cset - indicates the character set used for the attribute’s name -! data_size - indicates the size, in the number of characters, of the attribute -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5aget_info_by_name_f(loc_id, obj_name, attr_name, & - f_corder_valid, corder, cset, data_size, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of object to which attribute is attached - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name - - - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute - INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute - INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name - INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER :: corder_valid - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: attr_namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5aget_info_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, & - corder_valid, corder, cset, data_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AGET_INFO_BY_NAME_C'::h5aget_info_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(SIZE_T), INTENT(IN) :: obj_namelen - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(SIZE_T), INTENT(IN) :: attr_namelen - INTEGER(HID_T) :: lapl_id_default - INTEGER, INTENT(OUT) :: corder_valid - INTEGER, INTENT(OUT) :: corder - INTEGER, INTENT(OUT) :: cset - INTEGER(HSIZE_T), INTENT(OUT) :: data_size - - END FUNCTION h5aget_info_by_name_c - END INTERFACE - - obj_namelen = LEN(obj_name) - attr_namelen = LEN(attr_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5aget_info_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, & - corder_valid, corder, cset, data_size) - - f_corder_valid =.FALSE. - IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. - - END SUBROUTINE h5aget_info_by_name_f - -! -!****s* H5A/h5acreate_by_name_f -! -! NAME -! h5acreate_by_name_f -! -! PURPOSE -! Creates an attribute attached to a specified object -! -! INPUTS -! loc_id - Location or object identifier; may be dataset or group -! obj_name - Name, relative to loc_id, of object that attribute is to be attached to -! attr_name - Attribute name -! type_id - Attribute datatype identifier -! space_id - Attribute dataspace identifier -! -! OUTPUTS -! attr - an attribute identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! acpl_id - Attribute creation property list identifier (Currently not used.) -! aapl_id - Attribute access property list identifier (Currently not used.) -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! February, 2008 -! SOURCE - SUBROUTINE h5acreate_by_name_f(loc_id, obj_name, attr_name, type_id, space_id, attr, hdferr, & - acpl_id, aapl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T), INTENT(OUT) :: attr - INTEGER, INTENT(OUT) :: hdferr - - INTEGER(HID_T), INTENT(IN), OPTIONAL :: acpl_id - INTEGER(HID_T), INTENT(IN), OPTIONAL :: aapl_id - INTEGER(HID_T), INTENT(IN), OPTIONAL :: lapl_id -!***** - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: attr_namelen - - INTEGER(HID_T) :: acpl_id_default - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5acreate_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & - type_id, space_id, acpl_id_default, aapl_id_default, lapl_id_default, attr) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ACREATE_BY_NAME_C'::h5acreate_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(SIZE_T), INTENT(IN) :: obj_namelen - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(SIZE_T), INTENT(IN) :: attr_namelen - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T) :: acpl_id_default - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - INTEGER(HID_T), INTENT(OUT) :: attr - - END FUNCTION h5acreate_by_name_c - END INTERFACE - - obj_namelen = LEN(obj_name) - attr_namelen = LEN(attr_name) - - acpl_id_default = H5P_DEFAULT_F - aapl_id_default = H5P_DEFAULT_F - lapl_id_default = H5P_DEFAULT_F - - IF(PRESENT(acpl_id)) acpl_id_default = acpl_id - IF(PRESENT(aapl_id)) aapl_id_default = aapl_id - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5acreate_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & - type_id, space_id, acpl_id_default, aapl_id_default, lapl_id_default, attr) - END SUBROUTINE h5acreate_by_name_f - -! -!****s* H5A/H5Aexists_f -! -! NAME -! H5Aexists_f -! -! PURPOSE -! Determines whether an attribute with a given name exists on an object -! -! INPUTS -! obj_id - Object identifier -! attr_name - Attribute name -! -! OUTPUTS -! attr_exists - attribute exists status -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! February, 2008 -! -! SOURCE - SUBROUTINE h5aexists_f(obj_id, attr_name, attr_exists, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name - LOGICAL, INTENT(OUT) :: attr_exists ! .TRUE. if exists, .FALSE. otherwise - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER(HID_T) :: attr_exists_c - INTEGER(SIZE_T) :: attr_namelen - - INTERFACE - INTEGER FUNCTION h5aexists_c(obj_id, attr_name, attr_namelen, attr_exists_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AEXISTS_C'::h5aexists_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(SIZE_T) :: attr_namelen - INTEGER(HID_T) :: attr_exists_c - END FUNCTION h5aexists_c - END INTERFACE - - attr_namelen = LEN(attr_name) - - hdferr = h5aexists_c(obj_id, attr_name, attr_namelen, attr_exists_c) - - attr_exists = .FALSE. - IF(attr_exists_c.GT.0) attr_exists = .TRUE. - - END SUBROUTINE h5aexists_f - -! -!****s* H5A/H5Aexists_by_name_f -! -! NAME -! H5Aexists_by_name_f -! -! PURPOSE -! Determines whether an attribute with a given name exists on an object -! -! INPUTS -! loc_id - Location identifier -! obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) -! attr_name - Attribute name -! -! OUTPUTS -! attr_exists - attribute exists status -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list identifier -! -! AUTHOR -! M. Scot Breitenfeld -! February, 2008 -! -! SOURCE - SUBROUTINE h5aexists_by_name_f(loc_id, obj_name, attr_name, attr_exists, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id, - ! absolute from the file’s root group, or '.' - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name - LOGICAL, INTENT(OUT) :: attr_exists ! .TRUE. if exists, .FALSE. otherwise - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier -!***** - INTEGER :: attr_exists_c - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: attr_namelen - - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5aexists_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, attr_exists_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AEXISTS_BY_NAME_C'::h5aexists_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(SIZE_T), INTENT(IN) :: obj_namelen - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(SIZE_T), INTENT(IN) :: attr_namelen - INTEGER(HID_T), INTENT(IN) :: lapl_id_default - INTEGER, INTENT(OUT) :: attr_exists_c - END FUNCTION h5aexists_by_name_c - END INTERFACE - - attr_namelen = LEN(attr_name) - obj_namelen = LEN(obj_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5aexists_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, lapl_id_default, attr_exists_c) - - attr_exists = .FALSE. - IF(attr_exists_c.GT.0) attr_exists = .TRUE. - - END SUBROUTINE h5aexists_by_name_f -! -!****s* H5A/H5Aopen_by_name_f -! -! NAME -! H5Aopen_by_name_f -! -! PURPOSE -! Opens an attribute for an object by object name and attribute name. -! -! INPUTS -! loc_id - Location from which to find object to which attribute is attached -! obj_name - Object name either relative to loc_id, absolute from the file’s root group, or '.' (a dot) -! attr_name - Attribute name -! -! OUTPUTS -! attr_id - attribute identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! aapl_id - Attribute access property list (Currently unused; should be passed in as H5P_DEFAULT.) -! lapl_id - Link access property list identifier -! -! AUTHOR -! M. Scot Breitenfeld -! February, 2008 -! SOURCE - SUBROUTINE h5aopen_by_name_f(loc_id, obj_name, attr_name, attr_id, hdferr, aapl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Object name either relative to loc_id, - ! absolute from the file’s root group, or '.' - CHARACTER(LEN=*), INTENT(IN) :: attr_name ! Attribute name - INTEGER(HID_T), INTENT(OUT) :: attr_id ! Attribute identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: aapl_id ! Attribute access property list - ! (Currently unused; should be passed in as H5P_DEFAULT_F) - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier -!***** - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: attr_namelen - - INTERFACE - INTEGER FUNCTION h5aopen_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & - aapl_id_default, lapl_id_default, attr_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AOPEN_BY_NAME_C'::h5aopen_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(SIZE_T), INTENT(IN) :: obj_namelen - CHARACTER(LEN=*), INTENT(IN) :: attr_name - INTEGER(SIZE_T), INTENT(IN) :: attr_namelen - INTEGER(HID_T) :: aapl_id_default - INTEGER(HID_T) :: lapl_id_default - INTEGER(HID_T), INTENT(OUT) :: attr_id - END FUNCTION h5aopen_by_name_c - END INTERFACE - - attr_namelen = LEN(attr_name) - obj_namelen = LEN(obj_name) - - aapl_id_default = H5P_DEFAULT_F - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(aapl_id)) aapl_id_default = aapl_id - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5aopen_by_name_c(loc_id, obj_name, obj_namelen, attr_name, attr_namelen, & - aapl_id_default, lapl_id_default, attr_id) - - END SUBROUTINE h5aopen_by_name_f - -! -!****s* H5A/h5arename_f -! -! NAME -! h5arename_f -! -! PURPOSE -! Renames an attribute -! -! INPUTS -! loc_id - Location or object identifier; may be dataset or group -! old_attr_name - Prior attribute name -! new_attr_name - New attribute name -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! HISTORY -! N/A -! -! - -! SOURCE - SUBROUTINE h5arename_f(loc_id, old_attr_name, new_attr_name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Object identifier - CHARACTER(LEN=*), INTENT(IN) :: old_attr_name ! Prior attribute name - CHARACTER(LEN=*), INTENT(IN) :: new_attr_name ! New attribute name - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER(SIZE_T) :: old_attr_namelen - INTEGER(SIZE_T) :: new_attr_namelen - - INTERFACE - INTEGER FUNCTION h5arename_c(loc_id, & - old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ARENAME_C'::h5arename_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: old_attr_name, new_attr_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: old_attr_name - INTEGER(SIZE_T) :: old_attr_namelen - CHARACTER(LEN=*), INTENT(IN) :: new_attr_name - INTEGER(SIZE_T) :: new_attr_namelen - - END FUNCTION h5arename_c - END INTERFACE - - old_attr_namelen = LEN(old_attr_name) - new_attr_namelen = LEN(new_attr_name) - - hdferr = h5arename_c(loc_id, & - old_attr_name, old_attr_namelen, new_attr_name, new_attr_namelen) - - END SUBROUTINE h5arename_f - -END MODULE H5A - - diff --git a/fortran/src/H5Aff_F03.f90 b/fortran/src/H5Aff_F03.f90 deleted file mode 100644 index 5278280..0000000 --- a/fortran/src/H5Aff_F03.f90 +++ /dev/null @@ -1,1267 +0,0 @@ -!****h* ROBODoc/H5A (F03) -! NAME -! H5A_PROVISIONAL -! -! FILE -! src/fortran/src/H5Aff_F03.f90 -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5A functions. -! It contains the same functions as H5Aff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Aff_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! -! (A) C_LOC and character strings according to the Fortran 2003 standard: -! -! 15.1.2.5 C_LOC(X) -! -! Argument. X shall either -! -! (1) have interoperable type and type parameters and be -! (a) a variable that has the TARGET attribute and is interoperable, -! (b) an allocated allocatable variable that has the TARGET attribute -! and is not an array of zero size, or -! (c) an associated scalar pointer, or -! (2) be a nonpolymorphic scalar, have no length type parameters, and be -! (a) a nonallocatable, nonpointer variable that has the TARGET attribute, -! (b) an allocated allocatable variable that has the TARGET attribute, or -! (c) an associated pointer. -! -! - When X is a character, for interoperability the standard is: -! -! 15.2.1 Interoperability of intrinsic types -! -! ...if the type is character, interoperability also requires that the length type parameter -! be omitted or be specified by an initialization expression whose value is one. -! -! THEREFORE compilers that have not extended the standard require -! -! CHARACTER(LEN=1), TARGET :: chr -! or -! CHARACTER, TARGET :: chr -! -! (B) -! *** IMPORTANT *** -! If you add a new H5A function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5A_PROVISIONAL - - USE H5GLOBAL -! -! On Windows there are no big (integer*8) integers, so overloading -! for bug #670 does not work. I have to use DEC compilation directives to make -! Windows DEC Visual Fortran and OSF compilers happy and do right things. -! 05/01/02 EP -! - INTERFACE h5awrite_f - MODULE PROCEDURE h5awrite_integer_scalar - MODULE PROCEDURE h5awrite_integer_1 - MODULE PROCEDURE h5awrite_integer_2 - MODULE PROCEDURE h5awrite_integer_3 - MODULE PROCEDURE h5awrite_integer_4 - MODULE PROCEDURE h5awrite_integer_5 - MODULE PROCEDURE h5awrite_integer_6 - MODULE PROCEDURE h5awrite_integer_7 - MODULE PROCEDURE h5awrite_char_scalar - MODULE PROCEDURE h5awrite_char_1 - MODULE PROCEDURE h5awrite_char_2 - MODULE PROCEDURE h5awrite_char_3 - MODULE PROCEDURE h5awrite_char_4 - MODULE PROCEDURE h5awrite_char_5 - MODULE PROCEDURE h5awrite_char_6 - MODULE PROCEDURE h5awrite_char_7 - MODULE PROCEDURE h5awrite_real_scalar - MODULE PROCEDURE h5awrite_real_1 - MODULE PROCEDURE h5awrite_real_2 - MODULE PROCEDURE h5awrite_real_3 - MODULE PROCEDURE h5awrite_real_4 - MODULE PROCEDURE h5awrite_real_5 - MODULE PROCEDURE h5awrite_real_6 - MODULE PROCEDURE h5awrite_real_7 - ! This is the preferred way to call h5awrite - ! by passing an address - MODULE PROCEDURE h5awrite_ptr - - END INTERFACE - - INTERFACE h5aread_f - - MODULE PROCEDURE h5aread_integer_scalar - MODULE PROCEDURE h5aread_integer_1 - MODULE PROCEDURE h5aread_integer_2 - MODULE PROCEDURE h5aread_integer_3 - MODULE PROCEDURE h5aread_integer_4 - MODULE PROCEDURE h5aread_integer_5 - MODULE PROCEDURE h5aread_integer_6 - MODULE PROCEDURE h5aread_integer_7 - MODULE PROCEDURE h5aread_char_scalar - MODULE PROCEDURE h5aread_char_1 - MODULE PROCEDURE h5aread_char_2 - MODULE PROCEDURE h5aread_char_3 - MODULE PROCEDURE h5aread_char_4 - MODULE PROCEDURE h5aread_char_5 - MODULE PROCEDURE h5aread_char_6 - MODULE PROCEDURE h5aread_char_7 - MODULE PROCEDURE h5aread_real_scalar - MODULE PROCEDURE h5aread_real_1 - MODULE PROCEDURE h5aread_real_2 - MODULE PROCEDURE h5aread_real_3 - MODULE PROCEDURE h5aread_real_4 - MODULE PROCEDURE h5aread_real_5 - MODULE PROCEDURE h5aread_real_6 - MODULE PROCEDURE h5aread_real_7 - - ! This is the preferred way to call h5aread - ! by passing an address - MODULE PROCEDURE h5aread_ptr - - END INTERFACE - -! Interface for the function used to pass the C pointer of the buffer -! to the C H5Awrite routine - - INTERFACE - INTEGER FUNCTION h5awrite_f_c(attr_id, mem_type_id, buf) BIND(C, NAME='h5awrite_f_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - TYPE(C_PTR), VALUE :: buf - END FUNCTION h5awrite_f_c - END INTERFACE - -! Interface for the function used to pass the C pointer of the buffer -! to the C H5Aread routine - - INTERFACE - INTEGER FUNCTION h5aread_f_c(attr_id, mem_type_id, buf) BIND(C, NAME='h5aread_f_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - TYPE(C_PTR), VALUE :: buf - END FUNCTION h5aread_f_c - END INTERFACE - -CONTAINS - -!****s* H5A (F03)/h5awrite_f_F90 -! -! NAME -! h5awrite_f_F90 -! -! PURPOSE -! Writes an attribute. -! -! Inputs: -! attr_id - Attribute identifier -! memtype_id - Attribute datatype identifier (in memory) -! dims - Array to hold corresponding dimension sizes of data buffer buf; -! dim(k) has value of the k-th dimension of buffer buf; -! values are ignored if buf is a scalar -! buf - Data buffer; may be a scalar or an array -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! dims parameter was added to make code portable; -! Aprile 4, 2001 -! -! Changed buf intent to INOUT to be consistant -! with how the C functions handles it. The pg -! compiler will return 0 if a buf value is not set. -! February, 2008 -! -! NOTES -! This function is overloaded to write INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions. -! -! Fortran90 Interface: -!! SUBROUTINE h5awrite_f(attr_id, memtype_id, buf, dims, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: attr_id -!! INTEGER(HID_T) , INTENT(IN) :: memtype_id -!! TYPE , INTENT(IN) :: buf -!! INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - - SUBROUTINE h5awrite_integer_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_scalar - - SUBROUTINE h5awrite_integer_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) , & - DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_integer_1 - - - SUBROUTINE h5awrite_integer_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) , & - DIMENSION(dims(1),dims(2)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_2 - - SUBROUTINE h5awrite_integer_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_3 - - - SUBROUTINE h5awrite_integer_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_4 - - - SUBROUTINE h5awrite_integer_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_5 - - - SUBROUTINE h5awrite_integer_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_integer_6 - - - SUBROUTINE h5awrite_integer_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), & - TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_integer_7 - - - SUBROUTINE h5awrite_real_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_scalar - - SUBROUTINE h5awrite_real_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_real_1 - - - SUBROUTINE h5awrite_real_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_real_2 - - - SUBROUTINE h5awrite_real_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_3 - - - SUBROUTINE h5awrite_real_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_4 - - - SUBROUTINE h5awrite_real_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_5 - - - SUBROUTINE h5awrite_real_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_6 - - - SUBROUTINE h5awrite_real_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5awrite_real_7 - - SUBROUTINE h5awrite_char_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - CALL h5awrite_char_scalar_fix(attr_id, memtype_id, buf, LEN(buf), dims, hdferr) - - END SUBROUTINE h5awrite_char_scalar - - SUBROUTINE h5awrite_char_scalar_fix(attr_id, memtype_id, buf, buf_len, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) :: buf_len - CHARACTER(LEN=buf_len), INTENT(IN), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_scalar_fix - - SUBROUTINE h5awrite_char_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_1 - - SUBROUTINE h5awrite_char_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)(1:1)) - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_2 - - SUBROUTINE h5awrite_char_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_3 - - SUBROUTINE h5awrite_char_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_4 - - SUBROUTINE h5awrite_char_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1)(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_5 - - - SUBROUTINE h5awrite_char_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)(1:1)) - - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_6 - - SUBROUTINE h5awrite_char_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)(1:1)) - hdferr = h5awrite_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5awrite_char_7 - -!****s* H5A (F03)/h5awrite_f_F03 -! -! NAME -! h5awrite_f_F03 -! -! PURPOSE -! Writes an attribute. -! -! Inputs: -! attr_id - Attribute identifier -! memtype_id - Attribute datatype identifier (in memory) -! buf - Data buffer; may be a scalar or an array -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! NOTES -! This function is overloaded to write INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions. -! -! Fortran2003 Interface: -!! SUBROUTINE h5awrite_f(attr_id, memtype_id, buf, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: attr_id -!! INTEGER(HID_T) , INTENT(IN) :: memtype_id -!! TYPE(C_PTR) , INTENT(IN) :: buf -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5awrite_ptr(attr_id, mem_type_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - TYPE(C_PTR), INTENT(IN), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - - hdferr = h5awrite_f_c(attr_id, mem_type_id, buf) - - END SUBROUTINE h5awrite_ptr - -!****s* H5A (F03)/h5aread_f_F90 -! -! NAME -! h5aread_f_F90 -! -! PURPOSE -! Reads an attribute. -! -! Inputs: -! attr_id - Attribute identifier -! memtype_id - Attribute datatype identifier (in memory) -! dims - Array to hold corresponding dimension sizes of data buffer buf; -! dim(k) has value of the k-th dimension of buffer buf; -! values are ignored if buf is a scalar -! -! Outputs: -! buf - Data buffer; may be a scalar or an array -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! dims parameter was added to make code portable; -! Aprile 4, 2001 -! -! Changed buf intent to INOUT to be consistant -! with how the C functions handles it. The pg -! compiler will return 0 if a buf value is not set. -! February, 2008 -! -! NOTES -! This function is overloaded to write INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions. -! Fortran90 Interface: -!! SUBROUTINE h5aread_f(attr_id, memtype_id, buf, dims, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: attr_id -!! INTEGER(HID_T) , INTENT(IN) :: memtype_id -!! TYPE , INTENT(INOUT) :: buf -!! INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5aread_integer_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_scalar - - SUBROUTINE h5aread_integer_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_1 - - - SUBROUTINE h5aread_integer_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT),DIMENSION(dims(1),dims(2)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_2 - - - SUBROUTINE h5aread_integer_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_3 - - - SUBROUTINE h5aread_integer_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_4 - - - SUBROUTINE h5aread_integer_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_5 - - - SUBROUTINE h5aread_integer_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_6 - - - SUBROUTINE h5aread_integer_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_integer_7 - - - SUBROUTINE h5aread_real_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_scalar - - SUBROUTINE h5aread_real_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_1 - - - SUBROUTINE h5aread_real_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_2 - - - SUBROUTINE h5aread_real_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_3 - - - SUBROUTINE h5aread_real_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_4 - - - SUBROUTINE h5aread_real_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_5 - - - SUBROUTINE h5aread_real_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_6 - - - SUBROUTINE h5aread_real_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - END SUBROUTINE h5aread_real_7 - - SUBROUTINE h5aread_char_scalar(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - CALL h5aread_char_scalar_fix(attr_id, memtype_id, buf, LEN(buf), hdferr) - - END SUBROUTINE h5aread_char_scalar - - SUBROUTINE h5aread_char_scalar_fix(attr_id, memtype_id, buf, buf_len, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER, INTENT(IN) :: buf_len - CHARACTER(LEN=buf_len), INTENT(INOUT), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1:1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_scalar_fix - - SUBROUTINE h5aread_char_1(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_1 - - - SUBROUTINE h5aread_char_2(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_2 - - - SUBROUTINE h5aread_char_3(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_3 - - SUBROUTINE h5aread_char_4(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1)(1:1)) - - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_4 - - SUBROUTINE h5aread_char_5(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_5 - - - SUBROUTINE h5aread_char_6(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_6 - - - SUBROUTINE h5aread_char_7(attr_id, memtype_id, buf, dims, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)(1:1)) - hdferr = h5aread_f_c(attr_id, memtype_id, f_ptr) - - END SUBROUTINE h5aread_char_7 - - -!****s* H5A (F03)/h5aread_f_F03 -! -! NAME -! h5aread_f_F03 -! -! PURPOSE -! Reads an attribute. -! -! Inputs: -! attr_id - Attribute identifier -! memtype_id - Attribute datatype identifier (in memory) -! -! Outputs: -! buf - Data buffer; may be a scalar or an array -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! dims parameter was added to make code portable; -! Aprile 4, 2001 -! -! Changed buf intent to INOUT to be consistant -! with how the C functions handles it. The pg -! compiler will return 0 if a buf value is not set. -! February, 2008 -! -! NOTES -! This function is overloaded to write INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions. -! Fortran2003 Interface: -!! SUBROUTINE h5aread_f(attr_id, memtype_id, buf, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: attr_id -!! INTEGER(HID_T) , INTENT(IN) :: memtype_id -!! TYPE(C_PTR) , INTENT(INOUT) :: buf -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5aread_ptr(attr_id, mem_type_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - TYPE(C_PTR), INTENT(INOUT), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - - hdferr = h5aread_f_c(attr_id, mem_type_id, buf) - - END SUBROUTINE h5aread_ptr - -END MODULE H5A_PROVISIONAL - - diff --git a/fortran/src/H5Aff_F90.f90 b/fortran/src/H5Aff_F90.f90 deleted file mode 100644 index 974b023..0000000 --- a/fortran/src/H5Aff_F90.f90 +++ /dev/null @@ -1,1618 +0,0 @@ -!****h* ROBODoc/H5A (F90) -! -! NAME -! H5A_PROVISIONAL -! -! FILE -! fortran/src/H5Aff_F90.f90 -! -! PURPOSE -! -! This file contains Fortran 90 interfaces for H5A functions. It contains -! the same functions as H5Aff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Aff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5A function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5A_PROVISIONAL - - USE H5GLOBAL - ! - !On Windows there are no big (integer*8) integers, so overloading - !for bug #670 does not work. I have to use DEC compilation directives to make - !Windows DEC Visual Fortran and OSF compilers happy and do right things. - ! 05/01/02 EP - ! - INTERFACE h5awrite_f - - MODULE PROCEDURE h5awrite_integer_scalar - MODULE PROCEDURE h5awrite_integer_1 - MODULE PROCEDURE h5awrite_integer_2 - MODULE PROCEDURE h5awrite_integer_3 - MODULE PROCEDURE h5awrite_integer_4 - MODULE PROCEDURE h5awrite_integer_5 - MODULE PROCEDURE h5awrite_integer_6 - MODULE PROCEDURE h5awrite_integer_7 - MODULE PROCEDURE h5awrite_char_scalar - MODULE PROCEDURE h5awrite_char_1 - MODULE PROCEDURE h5awrite_char_2 - MODULE PROCEDURE h5awrite_char_3 - MODULE PROCEDURE h5awrite_char_4 - MODULE PROCEDURE h5awrite_char_5 - MODULE PROCEDURE h5awrite_char_6 - MODULE PROCEDURE h5awrite_char_7 - MODULE PROCEDURE h5awrite_real_scalar - MODULE PROCEDURE h5awrite_real_1 - MODULE PROCEDURE h5awrite_real_2 - MODULE PROCEDURE h5awrite_real_3 - MODULE PROCEDURE h5awrite_real_4 - MODULE PROCEDURE h5awrite_real_5 - MODULE PROCEDURE h5awrite_real_6 - MODULE PROCEDURE h5awrite_real_7 - - END INTERFACE - - INTERFACE h5aread_f - - MODULE PROCEDURE h5aread_integer_scalar - MODULE PROCEDURE h5aread_integer_1 - MODULE PROCEDURE h5aread_integer_2 - MODULE PROCEDURE h5aread_integer_3 - MODULE PROCEDURE h5aread_integer_4 - MODULE PROCEDURE h5aread_integer_5 - MODULE PROCEDURE h5aread_integer_6 - MODULE PROCEDURE h5aread_integer_7 - MODULE PROCEDURE h5aread_char_scalar - MODULE PROCEDURE h5aread_char_1 - MODULE PROCEDURE h5aread_char_2 - MODULE PROCEDURE h5aread_char_3 - MODULE PROCEDURE h5aread_char_4 - MODULE PROCEDURE h5aread_char_5 - MODULE PROCEDURE h5aread_char_6 - MODULE PROCEDURE h5aread_char_7 - MODULE PROCEDURE h5aread_real_scalar - MODULE PROCEDURE h5aread_real_1 - MODULE PROCEDURE h5aread_real_2 - MODULE PROCEDURE h5aread_real_3 - MODULE PROCEDURE h5aread_real_4 - MODULE PROCEDURE h5aread_real_5 - MODULE PROCEDURE h5aread_real_6 - MODULE PROCEDURE h5aread_real_7 - END INTERFACE - -CONTAINS - - SUBROUTINE h5awrite_integer_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5awrite_integer_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_S_C'::h5awrite_integer_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN)::buf - END FUNCTION h5awrite_integer_s_c - END INTERFACE - - hdferr = h5awrite_integer_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_scalar - - SUBROUTINE h5awrite_integer_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) , & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awrite_integer_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_1_C'::h5awrite_integer_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), DIMENSION(dims(1)) :: buf - END FUNCTION h5awrite_integer_1_c - END INTERFACE - - hdferr = h5awrite_integer_1_c(attr_id, memtype_id, buf, dims) - - END SUBROUTINE h5awrite_integer_1 - - - SUBROUTINE h5awrite_integer_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN) , & - DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_2_C'::h5awrite_integer_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5awrite_integer_2_c - END INTERFACE - - hdferr = h5awrite_integer_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_2 - - - SUBROUTINE h5awrite_integer_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_3_C'::h5awrite_integer_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5awrite_integer_3_c - END INTERFACE - - hdferr = h5awrite_integer_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_3 - - - SUBROUTINE h5awrite_integer_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_4_C'::h5awrite_integer_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5awrite_integer_4_c - END INTERFACE - - hdferr = h5awrite_integer_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_4 - - - SUBROUTINE h5awrite_integer_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_5_C'::h5awrite_integer_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5awrite_integer_5_c - END INTERFACE - - hdferr = h5awrite_integer_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_5 - - - SUBROUTINE h5awrite_integer_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_6_C'::h5awrite_integer_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5awrite_integer_6_c - END INTERFACE - - hdferr = h5awrite_integer_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_6 - - - SUBROUTINE h5awrite_integer_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_integer_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_integer_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_INTEGER_7_C'::h5awrite_integer_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5awrite_integer_7_c - END INTERFACE - - hdferr = h5awrite_integer_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_integer_7 - - - SUBROUTINE h5awrite_real_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_S_C'::h5awrite_real_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN)::buf - END FUNCTION h5awrite_real_s_c - END INTERFACE - - hdferr = h5awrite_real_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_scalar - - SUBROUTINE h5awrite_real_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_1_C'::h5awrite_real_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5awrite_real_1_c - END INTERFACE - - hdferr = h5awrite_real_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_1 - - - SUBROUTINE h5awrite_real_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_2_C'::h5awrite_real_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5awrite_real_2_c - END INTERFACE - - hdferr = h5awrite_real_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_2 - - - SUBROUTINE h5awrite_real_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_3_C'::h5awrite_real_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5awrite_real_3_c - END INTERFACE - - hdferr = h5awrite_real_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_3 - - - SUBROUTINE h5awrite_real_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_4_C'::h5awrite_real_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5awrite_real_4_c - END INTERFACE - - hdferr = h5awrite_real_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_4 - - - SUBROUTINE h5awrite_real_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_5_C'::h5awrite_real_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5awrite_real_5_c - END INTERFACE - - hdferr = h5awrite_real_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_5 - - - SUBROUTINE h5awrite_real_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_6_C'::h5awrite_real_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5awrite_real_6_c - END INTERFACE - - hdferr = h5awrite_real_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_6 - - - SUBROUTINE h5awrite_real_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_real_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_real_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_REAL_7_C'::h5awrite_real_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5awrite_real_7_c - END INTERFACE - - hdferr = h5awrite_real_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_real_7 - - SUBROUTINE h5awrite_char_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*),INTENT(IN) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_S_C'::h5awritec_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN)::buf - END FUNCTION h5awritec_s_c - END INTERFACE - - hdferr = h5awritec_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_scalar - - SUBROUTINE h5awrite_char_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_1_C'::h5awritec_1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), DIMENSION(dims(1))::buf - END FUNCTION h5awritec_1_c - END INTERFACE - - hdferr = h5awritec_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_1 - - - SUBROUTINE h5awrite_char_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awritec_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_2_C'::h5awritec_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5awritec_2_c - END INTERFACE - - hdferr = h5awritec_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_2 - - - SUBROUTINE h5awrite_char_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_3_C'::h5awritec_3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5awritec_3_c - END INTERFACE - - hdferr = h5awritec_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_3 - - - SUBROUTINE h5awrite_char_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_4_C'::h5awritec_4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5awritec_4_c - END INTERFACE - - hdferr = h5awritec_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_4 - - - SUBROUTINE h5awrite_char_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_5_C'::h5awritec_5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5awritec_5_c - END INTERFACE - - hdferr = h5awritec_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_5 - - - SUBROUTINE h5awrite_char_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_6_C'::h5awritec_6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5awritec_6_c - END INTERFACE - - hdferr = h5awritec_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_6 - - - SUBROUTINE h5awrite_char_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! INTEGER, EXTERNAL :: h5awritec_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awritec_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITEC_7_C'::h5awritec_7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5awritec_7_c - END INTERFACE - - hdferr = h5awritec_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_char_7 - -! -! NAME -! h5aread_f -! -! PURPOSE -! Reads an attribute. -! -! INPUTS -! attr_id - attribute identifier -! memtype_id - attribute memory type identifier -! dims - 1D array of size 7, stores sizes of the -! - buf array dimensions. -! OUTPUTS -! buf - buffer to read attribute data in -! hdferr: - error code -! Success: 0 -! Failure: -1 -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! Explicit Fortran interfaces are added for -! called C functions (it is needed for Windows -! port). February 27, 2001 -! -! dims parameter was added to make code portable; -! April 4, 2001 -! -! Changed buf intent to INOUT to be consistant -! with how the C functions handles it. The pg -! compiler will return 0 if a buf value is not set. -! February, 2008 -! -! NOTES -! This function is overloaded to write INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions. -! - - SUBROUTINE h5aread_integer_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_S_C'::h5aread_integer_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT)::buf - END FUNCTION h5aread_integer_s_c - END INTERFACE - hdferr = h5aread_integer_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_scalar - - SUBROUTINE h5aread_integer_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_1_C'::h5aread_integer_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), DIMENSION(dims(1)) :: buf - END FUNCTION h5aread_integer_1_c - END INTERFACE - - hdferr = h5aread_integer_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_1 - - - SUBROUTINE h5aread_integer_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT),DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_2_C'::h5aread_integer_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5aread_integer_2_c - END INTERFACE - - hdferr = h5aread_integer_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_2 - - - SUBROUTINE h5aread_integer_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_3_C'::h5aread_integer_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5aread_integer_3_c - END INTERFACE - - hdferr = h5aread_integer_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_3 - - - SUBROUTINE h5aread_integer_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_4_C'::h5aread_integer_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5aread_integer_4_c - END INTERFACE - - hdferr = h5aread_integer_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_4 - - - SUBROUTINE h5aread_integer_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_5_C'::h5aread_integer_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5aread_integer_5_c - END INTERFACE - - hdferr = h5aread_integer_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_5 - - - SUBROUTINE h5aread_integer_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_6_C'::h5aread_integer_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5aread_integer_6_c - END INTERFACE - - hdferr = h5aread_integer_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_6 - - - SUBROUTINE h5aread_integer_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_integer_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_integer_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_INTEGER_7_C'::h5aread_integer_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5aread_integer_7_c - END INTERFACE - - hdferr = h5aread_integer_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_integer_7 - - - SUBROUTINE h5aread_real_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_S_C'::h5aread_real_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT)::buf - END FUNCTION h5aread_real_s_c - END INTERFACE - - hdferr = h5aread_real_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_scalar - - SUBROUTINE h5aread_real_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_1_C'::h5aread_real_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5aread_real_1_c - END INTERFACE - - hdferr = h5aread_real_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_1 - - - SUBROUTINE h5aread_real_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_2_C'::h5aread_real_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5aread_real_2_c - END INTERFACE - - hdferr = h5aread_real_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_2 - - - SUBROUTINE h5aread_real_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_3_C'::h5aread_real_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5aread_real_3_c - END INTERFACE - - hdferr = h5aread_real_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_3 - - - SUBROUTINE h5aread_real_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_4_C'::h5aread_real_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5aread_real_4_c - END INTERFACE - - hdferr = h5aread_real_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_4 - - - SUBROUTINE h5aread_real_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_5_C'::h5aread_real_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5aread_real_5_c - END INTERFACE - - hdferr = h5aread_real_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_5 - - - SUBROUTINE h5aread_real_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_6_C'::h5aread_real_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5aread_real_6_c - END INTERFACE - - hdferr = h5aread_real_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_6 - - - SUBROUTINE h5aread_real_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_real_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_real_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_REAL_7_C'::h5aread_real_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5aread_real_7_c - END INTERFACE - - hdferr = h5aread_real_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_real_7 - - SUBROUTINE h5aread_char_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_S_C'::h5areadc_s_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT) :: buf - END FUNCTION h5areadc_s_c - END INTERFACE - - hdferr = h5areadc_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_scalar - - SUBROUTINE h5aread_char_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_1_C'::h5areadc_1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5areadc_1_c - END INTERFACE - - hdferr = h5areadc_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_1 - - - SUBROUTINE h5aread_char_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_2_C'::h5areadc_2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5areadc_2_c - END INTERFACE - - hdferr = h5areadc_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_2 - - - SUBROUTINE h5aread_char_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_3_C'::h5areadc_3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5areadc_3_c - END INTERFACE - - hdferr = h5areadc_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_3 - - - SUBROUTINE h5aread_char_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_4_C'::h5areadc_4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5areadc_4_c - END INTERFACE - - hdferr = h5areadc_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_4 - - - SUBROUTINE h5aread_char_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_5_C'::h5areadc_5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5areadc_5_c - END INTERFACE - - hdferr = h5areadc_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_5 - - - SUBROUTINE h5aread_char_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_6_C'::h5areadc_6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5areadc_6_c - END INTERFACE - - hdferr = h5areadc_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_6 - - - SUBROUTINE h5aread_char_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5areadc_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5areadc_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREADC_7_C'::h5areadc_7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5areadc_7_c - END INTERFACE - - hdferr = h5areadc_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_char_7 - -END MODULE H5A_PROVISIONAL - - diff --git a/fortran/src/H5Df.c b/fortran/src/H5Df.c index 0d32dac..57b4d4d 100644 --- a/fortran/src/H5Df.c +++ b/fortran/src/H5Df.c @@ -1,6 +1,6 @@ /****h* H5Df/H5Df * PURPOSE - * This file contains C stubs for H5D Fortran APIs + * This file contains C stubs for H5D Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -48,7 +48,7 @@ * SOURCE */ int_f -nh5dcreate_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *space_id, +h5dcreate_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *lcpl_id, hid_t_f *dcpl_id, hid_t_f *dapl_id, hid_t_f *dset_id) /******/ { @@ -84,1161 +84,118 @@ DONE: * PURPOSE * Call H5Dopen2 to open a dataset * INPUTS - * loc_id - file or group identifier - * name - name of the dataset - * namelen - name length - * dapl_id - Dataset access property list + * loc_id - file or group identifier + * name - name of the dataset + * namelen - name length + * dapl_id - Dataset access property list * OUTPUTS - * dset_id - dataset identifier + * dset_id - dataset identifier * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, August 4, 1999 - * HISTORY - * Added 1.8 parameter: dapl_id - * SOURCE -*/ -int_f -nh5dopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *dapl_id, hid_t_f *dset_id) -/******/ -{ - char *c_name = NULL; - hid_t c_dset_id; - int ret_value = -1; - - /* - * Convert FORTRAN name to C name - */ - if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*namelen))) - goto DONE; - - /* - * Call H5Dopen2 function. - */ - if((c_dset_id = H5Dopen2((hid_t)*loc_id, c_name, (hid_t)*dapl_id)) < 0) - goto DONE; - - *dset_id = (hid_t_f)c_dset_id; - ret_value = 0; - -DONE: - if(c_name) - HDfree(c_name); - return ret_value; -} - - -/****if* H5Df/h5dwritec_c - * NAME - * h5dwritec_c - * PURPOSE - * Call h5dwrite_c to write a dataset of characters - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - character data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Tuesday, May 14, 2002 - * HISTORY - * This function is added to accomodate oveloaded h5dwrite_f - * with the dims argument being of INTEGER(HSIZE_T) type - - * SOURCE -*/ -int_f -nh5dwritec_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) -/******/ -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dwritec_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dwrite_c function. - */ - ret_value = nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -/****if* H5Df/h5dwrite_c - * NAME - * h5dwrite_c - * PURPOSE - * Call H5Dwrite to write a dataset - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Tuesday, May 14, 2002 - * HISTORY - * This function is added to accomodate oveloaded h5dwrite_f - * with the dims argument being of INTEGER(HSIZE_T) type - * - * Added nh5dwrite_integer(real,double)_s,1-7_c functions to eliminate - * complains about wrong parameter types in h5dwrite_c function - * called by Fortran rouitnes - * October 10, 2006 EIP - * - * SOURCE -*/ -int_f -nh5dwrite_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f H5_ATTR_UNUSED *dims) -/******/ -{ - int ret_value = -1; - herr_t ret; - hid_t c_dset_id; - hid_t c_mem_type_id; - hid_t c_mem_space_id; - hid_t c_file_space_id; - hid_t c_xfer_prp; - - /* - * Define transfer property - */ - c_xfer_prp = (hid_t)*xfer_prp; - - /* - * Call H5Dwrite function. - */ - c_dset_id = (hid_t)*dset_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_mem_space_id = (hid_t)*mem_space_id; - c_file_space_id = (hid_t)*file_space_id; - ret = H5Dwrite(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf); - - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -int_f -nh5dwrite_integer_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_integer_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -int_f -nh5dwrite_real_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_real_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dwrite_double_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dwrite_c function. - */ - return nh5dwrite_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - - -/****if* H5Df/h5dwrite_ref_obj_c - * NAME - * h5dwrite_ref_obj_c - * PURPOSE - * Call H5Dwrite to write a dataset of object references - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - data buffer with references to the objects. - * n - number of references to be stored. - * RETURNS - * 0 on success,e-1 on failure - * AUTHOR - * Elena Pourmal - * Tuesday, May 14, 2002 - * HISTORY - * This function was added to accomodate h5dwrite_f with the - * dims argumnet being of INTEGER(HSIZE_T) type. - * SOURCE -*/ -int_f -nh5dwrite_ref_obj_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, haddr_t_f *buf, hsize_t_f *dims) -/******/ -{ - int ret_value = -1; - herr_t ret; - hid_t c_dset_id; - hid_t c_mem_type_id; - hid_t c_mem_space_id; - hid_t c_file_space_id; - hid_t c_xfer_prp; - hobj_ref_t *buf_c; - unsigned int i, n; - - /* - * Define transfer property - */ - c_xfer_prp = (hid_t)*xfer_prp; - - /* - * Allocate temporary buffer and copy references from Fortran. - */ - n = (unsigned int)*dims; - buf_c = (hobj_ref_t*)HDmalloc(sizeof(hobj_ref_t)*n); - if ( buf_c != NULL ) { - for (i = 0; i < n; i++) - HDmemcpy(&buf_c[i], &buf[i], sizeof(haddr_t)); - } - else return ret_value; - - /* - * Call H5Dwrite function. - */ - c_dset_id = (hid_t)*dset_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_mem_space_id = (hid_t)*mem_space_id; - c_file_space_id = (hid_t)*file_space_id; - ret = H5Dwrite(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf_c); - HDfree(buf_c); - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -/****if* H5Df/h5dwrite_ref_reg_c - * NAME - * h5dwrite_ref_reg_c - * PURPOSE - * Call H5Dwrite to write a dataset of dataset region references - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - data buffer with references to the objects. - * n - number of references to be stored. - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Tuesday, May 14, 2002 - * HISTORY - * This function was added to accomodate h5dwrite_f with the - * dims argument being of INTEGER(HSIZE_T) type - * SOURCE -*/ -int_f -nh5dwrite_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims) -/******/ -{ - int ret_value = -1; - herr_t ret; - hid_t c_dset_id; - hid_t c_mem_type_id; - hid_t c_mem_space_id; - hid_t c_file_space_id; - hid_t c_xfer_prp; - hdset_reg_ref_t *buf_c = NULL; - unsigned int i, n; - - n = (unsigned int)*dims; - /* - * Define transfer property - */ - c_xfer_prp = (hid_t)*xfer_prp; - - /* - * Allocate temporary buffer and copy references from Fortran. - */ - buf_c = (hdset_reg_ref_t *)HDmalloc(sizeof(hdset_reg_ref_t)*n); - if ( buf_c != NULL ) { - for (i = 0; i < n; i++) { - HDmemcpy(&buf_c[i], buf, H5R_DSET_REG_REF_BUF_SIZE); - buf = buf + REF_REG_BUF_LEN_F; - } - } - else return ret_value; - - - /* - * Call H5Dwrite function. - */ - c_dset_id = (hid_t)*dset_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_mem_space_id = (hid_t)*mem_space_id; - c_file_space_id = (hid_t)*file_space_id; - ret = H5Dwrite(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf_c); - HDfree(buf_c); - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - - - -/****if* H5Df/h5dreadc_c - * NAME - * h5dreadc_c - * PURPOSE - * Call h5dread_c to read a dataset of characters - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * OUTPUTS - * buf - character data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, May 15, 2002 - * HISTORY - * This function was added to accomodate h5dread_f subroutine - * with the dims parameter being of INTEGER(HSIZE_T_F) size. - * SOURCE -*/ -int_f -nh5dreadc_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) -/******/ -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -int_f -nh5dreadc_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims) - -{ - int ret_value = -1; - - /* - * Call h5dread_c function. - */ - ret_value = nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, _fcdtocp(buf), dims); - - return ret_value; -} - -/****if* H5Df/h5dread_c - * NAME - * h5dread_c - * PURPOSE - * Call H5Draed to read a dataset - * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * OUTPUTS - * buf - data buffer - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, May 15, 2002 - * HISTORY - * This function was added to accomodate h5dread_f subroutine - * with the dims parameter being of INTEGER(HSIZE_T_F) size. - * - * Added nh5dread_integer(real,double)_s,1-7_c functions to eliminate - * complains about wrong parameter types in h5dwrite_c function - * called by Fortran rouitnes - * October 10, 2006 EIP - * - * SOURCE -*/ -int_f -nh5dread_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f H5_ATTR_UNUSED *dims) -/******/ -{ - int ret_value = -1; - herr_t ret; - hid_t c_dset_id; - hid_t c_mem_type_id; - hid_t c_mem_space_id; - hid_t c_file_space_id; - hid_t c_xfer_prp; - - /* - * Define transfer property - */ - c_xfer_prp = (hid_t)*xfer_prp; - - /* - * Call H5Dread function. - */ - c_dset_id = (hid_t)*dset_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_mem_space_id = (hid_t)*mem_space_id; - c_file_space_id = (hid_t)*file_space_id; - ret = H5Dread(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf); - - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -int_f -nh5dread_integer_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_integer_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_real_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - + * 0 on success, -1 on failure + * AUTHOR + * Elena Pourmal + * Wednesday, August 4, 1999 + * HISTORY + * Added 1.8 parameter: dapl_id + * SOURCE +*/ int_f -nh5dread_double_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) - +h5dopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *dapl_id, hid_t_f *dset_id) +/******/ { - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) + char *c_name = NULL; + hid_t c_dset_id; + int ret_value = -1; -{ /* - * Call h5dread_c function. + * Convert FORTRAN name to C name */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} - -int_f -nh5dread_double_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) + if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*namelen))) + goto DONE; -{ /* - * Call h5dread_c function. + * Call H5Dopen2 function. */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); -} + if((c_dset_id = H5Dopen2((hid_t)*loc_id, c_name, (hid_t)*dapl_id)) < 0) + goto DONE; -int_f -nh5dread_double_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims) + *dset_id = (hid_t_f)c_dset_id; + ret_value = 0; -{ - /* - * Call h5dread_c function. - */ - return nh5dread_c(dset_id, mem_type_id, mem_space_id, file_space_id, xfer_prp, buf, dims); +DONE: + if(c_name) + HDfree(c_name); + return ret_value; } -/****if* H5Df/h5dread_ref_obj_c +/****if* H5Df/h5dwrite_ref_reg_c * NAME - * h5dread_ref_obj_c + * h5dwrite_ref_reg_c * PURPOSE - * Call H5Dread to read a dataset of object references + * Call H5Dwrite to write a dataset of dataset region references * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - data buffer to store references to the objects. - * n - number of references to be stored. + * dset_id - dataset identifier + * mem_type_id - memory datatype identifier + * mem_space_id - memory dataspace identifier + * file_space_id - memory dataspace identifier + * xfer_pr - identifier of transfer property list + * buf - data buffer with references to the objects. + * n - number of references to be stored. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, May 15, 2002 + * Tuesday, May 14, 2002 * HISTORY - * This function was added to accomodate h5dread_f subroutine - * with the dims parameter being of INTEGER(HSIZE_T_F) size. + * This function was added to accomodate h5dwrite_f with the + * dims argument being of INTEGER(HSIZE_T) type * SOURCE */ int_f -nh5dread_ref_obj_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, haddr_t_f * buf, hsize_t_f *dims) +h5dwrite_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims) /******/ { - int ret_value = -1; - herr_t ret = -1; - hid_t c_dset_id; - hid_t c_mem_type_id; - hid_t c_mem_space_id; - hid_t c_file_space_id; - hid_t c_xfer_prp; - hobj_ref_t *buf_c = NULL; - hsize_t i,n; - - /* - * Define transfer property - */ - c_xfer_prp = (hid_t)*xfer_prp; - - /* - * Allocate temporary buffer. - */ - n = (hsize_t)*dims; - buf_c = (hobj_ref_t*)HDmalloc(sizeof(hobj_ref_t)*(size_t)n); - if ( buf_c != NULL ) { - /* - * Call H5Dread function. - */ - c_dset_id = (hid_t)*dset_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_mem_space_id = (hid_t)*mem_space_id; - c_file_space_id = (hid_t)*file_space_id; - ret = H5Dread(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf_c); - if (ret >=0) { - for (i = 0; i < n; i++) - HDmemcpy(&buf[i], &buf_c[i], sizeof(haddr_t)); - } - if ( buf_c != NULL ) HDfree(buf_c); - } - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; + int ret_value = -1; + herr_t ret; + hid_t c_dset_id; + hid_t c_mem_type_id; + hid_t c_mem_space_id; + hid_t c_file_space_id; + hid_t c_xfer_prp; + hdset_reg_ref_t *buf_c = NULL; + unsigned int i, n; + + n = (unsigned int)*dims; + /* + * Define transfer property + */ + c_xfer_prp = (hid_t)*xfer_prp; + + /* + * Allocate temporary buffer and copy references from Fortran. + */ + buf_c = (hdset_reg_ref_t *)HDmalloc(sizeof(hdset_reg_ref_t)*n); + if ( buf_c != NULL ) { + for (i = 0; i < n; i++) { + HDmemcpy(&buf_c[i], buf, H5R_DSET_REG_REF_BUF_SIZE); + buf = buf + REF_REG_BUF_LEN_F; + } + } + else return ret_value; + + + /* + * Call H5Dwrite function. + */ + c_dset_id = (hid_t)*dset_id; + c_mem_type_id = (hid_t)*mem_type_id; + c_mem_space_id = (hid_t)*mem_space_id; + c_file_space_id = (hid_t)*file_space_id; + ret = H5Dwrite(c_dset_id, c_mem_type_id, c_mem_space_id, c_file_space_id, c_xfer_prp, buf_c); + HDfree(buf_c); + if (ret < 0) return ret_value; + ret_value = 0; + return ret_value; } /****if* H5Df/h5dread_ref_reg_c @@ -1247,25 +204,25 @@ nh5dread_ref_obj_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_i * PURPOSE * Call H5Dread to read a dataset of dataset region references * INPUTS - * dset_id - dataset identifier - * mem_type_id - memory datatype identifier - * mem_space_id - memory dataspace identifier - * file_space_id - memory dataspace identifier - * xfer_pr - identifier of transfer property list - * buf - data buffer to store references to the objects. - * n - number of references to be stored. + * dset_id - dataset identifier + * mem_type_id - memory datatype identifier + * mem_space_id - memory dataspace identifier + * file_space_id - memory dataspace identifier + * xfer_pr - identifier of transfer property list + * buf - data buffer to store references to the objects. + * n - number of references to be stored. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, May 15, 2002 + * Wednesday, May 15, 2002 * HISTORY - * This function was added to accomodate h5dread_f subroutine - * with the dims parameter being of INTEGER(HSIZE_T_F) size. + * This function was added to accomodate h5dread_f subroutine + * with the dims parameter being of INTEGER(HSIZE_T_F) size. * SOURCE */ int_f -nh5dread_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f * buf, hsize_t_f *dims) +h5dread_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f * buf, hsize_t_f *dims) /******/ { int ret_value = -1; @@ -1317,19 +274,19 @@ nh5dread_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_i * PURPOSE * Call H5Dclose to close a dataset * INPUTS - * dset_id - identifier of the dataset to be closed + * dset_id - identifier of the dataset to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 4, 1999 + * Wednesday, August 4, 1999 * HISTORY * * SOURCE */ int_f -nh5dclose_c ( hid_t_f *dset_id ) +h5dclose_c ( hid_t_f *dset_id ) /******/ { int ret_value = 0; @@ -1345,21 +302,21 @@ nh5dclose_c ( hid_t_f *dset_id ) * PURPOSE * Call H5Dget_space to obtain dataspace of a dataset * INPUTS - * dset_id - identifier of the dataset + * dset_id - identifier of the dataset * OUTPUTS - * space_id - identifier of the dataset's dataspace + * space_id - identifier of the dataset's dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 19, 1999 + * Thursday, August 19, 1999 * HISTORY * * SOURCE */ int_f -nh5dget_space_c ( hid_t_f *dset_id , hid_t_f *space_id) +h5dget_space_c ( hid_t_f *dset_id , hid_t_f *space_id) /******/ { int ret_value = -1; @@ -1380,21 +337,21 @@ nh5dget_space_c ( hid_t_f *dset_id , hid_t_f *space_id) * PURPOSE * Call H5Dget_type to obtain datatype of a dataset * INPUTS - * dset_id - identifier of the dataset + * dset_id - identifier of the dataset * OUTPUTS - * type_id - identifier of the dataset's datatype + * type_id - identifier of the dataset's datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 19, 1999 + * Thursday, August 19, 1999 * HISTORY * * SOURCE */ int_f -nh5dget_type_c ( hid_t_f *dset_id , hid_t_f *type_id) +h5dget_type_c ( hid_t_f *dset_id , hid_t_f *type_id) /******/ { int ret_value = -1; @@ -1416,23 +373,23 @@ nh5dget_type_c ( hid_t_f *dset_id , hid_t_f *type_id) * h5dget_create_plist_c * PURPOSE * Call H5Dget_create_plist to obtain creation property list - * of a dataset + * of a dataset * INPUTS - * dset_id - identifier of the dataset + * dset_id - identifier of the dataset * OUTPUTS - * plist_id - identifier of he dataset creation property list + * plist_id - identifier of he dataset creation property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 19, 1999 + * Thursday, August 19, 1999 * HISTORY * * SOURCE */ int_f -nh5dget_create_plist_c ( hid_t_f *dset_id , hid_t_f *plist_id) +h5dget_create_plist_c ( hid_t_f *dset_id , hid_t_f *plist_id) /******/ { int ret_value = -1; @@ -1456,24 +413,24 @@ nh5dget_create_plist_c ( hid_t_f *dset_id , hid_t_f *plist_id) * PURPOSE * Call H5Dset_extent to extend dataset with unlimited dimensions * INPUTS - * dset_id - identifier of the dataset + * dset_id - identifier of the dataset * OUTPUTS - * dims - array with the dimension sizes + * dims - array with the dimension sizes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, August 19, 1999 + * Thursday, August 19, 1999 * * HISTORY - * Changed name from the now obsolete h5dextend - * to h5dset_extent in order to match new fortran interface. + * Changed name from the now obsolete h5dextend + * to h5dset_extent in order to match new fortran interface. * -MSB- March 14, 2008 * SOURCE */ int_f -nh5dset_extent_c ( hid_t_f *dset_id , hsize_t_f *dims) +h5dset_extent_c ( hid_t_f *dset_id , hsize_t_f *dims) /******/ { hid_t c_space_id; @@ -1503,28 +460,28 @@ nh5dset_extent_c ( hid_t_f *dset_id , hsize_t_f *dims) return ret_value; } -/****if* H5Df/nh5dget_storage_size_c +/****if* H5Df/h5dget_storage_size_c * NAME - * nh5dget_storage_size_c + * h5dget_storage_size_c * PURPOSE * Call H5Dget_storage_size to return the amount of storage - * required for a dataset + * required for a dataset * INPUTS - * dset_id - identifier of the dataset + * dset_id - identifier of the dataset * OUTPUTS - * size - the amount of storage required for a dataset + * size - the amount of storage required for a dataset * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, October 22, 2002 + * Tuesday, October 22, 2002 * HISTORY * * SOURCE */ int_f -nh5dget_storage_size_c ( hid_t_f *dset_id , hsize_t_f *size) +h5dget_storage_size_c ( hid_t_f *dset_id , hsize_t_f *size) /******/ { int ret_value = -1; @@ -1539,29 +496,29 @@ nh5dget_storage_size_c ( hid_t_f *dset_id , hsize_t_f *size) return ret_value; } -/****if* H5Df/nh5dvlen_get_max_len_c +/****if* H5Df/h5dvlen_get_max_len_c * NAME - * nh5dvlen_get_max_len_c + * h5dvlen_get_max_len_c * PURPOSE * Get the maximum size of the VL dataset element * INPUTS - * dset_id - identifier of the dataset - * type_id - datatype identifier - * space_id - dataspace identifier + * dset_id - identifier of the dataset + * type_id - datatype identifier + * space_id - dataspace identifier * OUTPUTS - * len - maximum length of the VL dataset element + * len - maximum length of the VL dataset element * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, October 22, 2002 + * Tuesday, October 22, 2002 * HISTORY * * SOURCE */ int_f -nh5dvlen_get_max_len_c ( hid_t_f *dset_id , hid_t_f *type_id, hid_t_f *space_id, size_t_f *len) +h5dvlen_get_max_len_c ( hid_t_f *dset_id , hid_t_f *type_id, hid_t_f *space_id, size_t_f *len) /******/ { int ret_value = -1; @@ -1597,34 +554,34 @@ DONE: HDfree(c_buf); return ret_value; } -/****if* H5Df/nh5dwrite_vl_integer_c +/****if* H5Df/h5dwrite_vl_integer_c * NAME - * nh5dwrite_vl_integer_c + * h5dwrite_vl_integer_c * PURPOSE * Write variable length dataset * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * buf - data buffer - * dims - one-demnsional array of size 2 - * dims[0] = MAXLENGTH - * dims[1] = number of elements of VL type - * len - array element lenghts + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * buf - data buffer + * dims - one-demnsional array of size 2 + * dims[0] = MAXLENGTH + * dims[1] = number of elements of VL type + * len - array element lenghts * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, October 23, 2002 + * Wednesday, October 23, 2002 * HISTORY * * SOURCE */ int_f -nh5dwrite_vl_integer_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len) +h5dwrite_vl_integer_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -1670,35 +627,35 @@ DONE: return ret_value; } -/****if* H5Df/nh5dread_vl_integer_c +/****if* H5Df/h5dread_vl_integer_c * NAME - * nh5dread_vl_integer_c + * h5dread_vl_integer_c * PURPOSE * Read variable length dataset * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * dims - one-demnsional array of size 2 - * dims[0] = MAXLENGTH - * dims[1] = number of elements of VL type + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * dims - one-demnsional array of size 2 + * dims[0] = MAXLENGTH + * dims[1] = number of elements of VL type * OUTPUTS - * buf - data buffer - * len - array element lenghts + * buf - data buffer + * len - array element lenghts * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, October 24, 2002 + * Wednesday, October 24, 2002 * HISTORY * * SOURCE */ int_f -nh5dread_vl_integer_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len) +h5dread_vl_integer_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -1742,33 +699,33 @@ DONE: return ret_value; } -/****if* H5Df/nh5dwrite_vl_string_c +/****if* H5Df/h5dwrite_vl_string_c * NAME - * nh5dwrite_vl_string_c + * h5dwrite_vl_string_c * PURPOSE * Write variable length strings from Fortran program * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * buf - data buffer - * dims - one-demnsional array of size 2 - * dims[0] = number of strings of size max_len - * len - array of strings lengths + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * buf - data buffer + * dims - one-demnsional array of size 2 + * dims[0] = number of strings of size max_len + * len - array of strings lengths * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 28, 2002 + * Monday, October 28, 2002 * HISTORY * * SOURCE */ int_f -nh5dwrite_vl_string_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len) +h5dwrite_vl_string_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -1829,33 +786,33 @@ DONE: HDfree(tmp); return ret_value; } -/****if* H5Df/nh5dread_vl_string_c +/****if* H5Df/h5dread_vl_string_c * NAME - * nh5dread_vl_string_c + * h5dread_vl_string_c * PURPOSE * Read variable length strings from Fortran program * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * dims - one-demnsional array of size 2 - * dims[0] = number of strings of size max_len - * Output: buf - data buffer - * len - array of strings lengths + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * dims - one-demnsional array of size 2 + * dims[0] = number of strings of size max_len + * Output: buf - data buffer + * len - array of strings lengths * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, November 1, 2002 + * Friday, November 1, 2002 * HISTORY * * SOURCE */ int_f -nh5dread_vl_string_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len) +h5dread_vl_string_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -1912,34 +869,34 @@ nh5dread_vl_string_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_spa return ret_value; } -/****if* H5Df/nh5dwrite_vl_real_c +/****if* H5Df/h5dwrite_vl_real_c * NAME - * nh5dwrite_vl_real_c + * h5dwrite_vl_real_c * PURPOSE * Write variable length dataset * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * buf - data buffer - * dims - one-demnsional array of size 2 - * dims[0] = MAXLENGTH - * dims[1] = number of elements of VL type - * len - array element lenghts + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * buf - data buffer + * dims - one-demnsional array of size 2 + * dims[0] = MAXLENGTH + * dims[1] = number of elements of VL type + * len - array element lenghts * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, November 11, 2002 + * Monday, November 11, 2002 * HISTORY * * SOURCE */ int_f -nh5dwrite_vl_real_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len) +h5dwrite_vl_real_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -1985,35 +942,35 @@ DONE: return ret_value; } -/****if* H5Df/nh5dread_vl_real_c +/****if* H5Df/h5dread_vl_real_c * NAME - * nh5dread_vl_real_c + * h5dread_vl_real_c * PURPOSE * Read variable length dataset * INPUTS - * dset_id - identifier of the dataset - * mem_type_id - datatype identifier - * mem_space_id - dataspace identifier - * file_space_id - file dataspace identifier - * xfer - file transfer property - * dims - one-demnsional array of size 2 - * dims[0] = MAXLENGTH - * dims[1] = number of elements of VL type + * dset_id - identifier of the dataset + * mem_type_id - datatype identifier + * mem_space_id - dataspace identifier + * file_space_id - file dataspace identifier + * xfer - file transfer property + * dims - one-demnsional array of size 2 + * dims[0] = MAXLENGTH + * dims[1] = number of elements of VL type * OUTPUTS - * buf - data buffer - * len - array element lenghts + * buf - data buffer + * len - array element lenghts * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, November 11, 2002 + * Monday, November 11, 2002 * HISTORY * * SOURCE */ int_f -nh5dread_vl_real_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len) +h5dread_vl_real_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len) /******/ { int ret_value = -1; @@ -2058,39 +1015,6 @@ DONE: return ret_value; } -/****if* H5Df/h5dfillc_c - * NAME - * h5dfillc_c - * PURPOSE - * Call h5fill_c to fill memory buffer with a fill value - * INPUTS - * fill_value - fill value - * fill_type_id - fill value datatype identifier - * space_id - memory space selection identifier - * buf - memory buffer to fill - * mem_type_id - memory buffer dtatype identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, March 12, 2003 - * HISTORY - * - * SOURCE -*/ -int_f -nh5dfillc_c (_fcd fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, _fcd buf, hid_t_f *mem_type_id) -/******/ -{ - int ret_value = -1; - - /* - * Call h5dfill_c function. - */ - ret_value = h5dfill_c(_fcdtocp(fill_value), fill_type_id, space_id, _fcdtocp(buf), mem_type_id); - - return ret_value; -} /****if* H5Df/h5dfill_c * NAME * h5dfill_c @@ -2135,98 +1059,26 @@ h5dfill_c (void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * b return ret_value; } -int_f -nh5dfill_integer_c (void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id) - -{ - int ret_value = -1; - herr_t ret; - hid_t c_fill_type_id; - hid_t c_mem_type_id; - hid_t c_space_id; - - c_fill_type_id = (hid_t)*fill_type_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_space_id = (hid_t)*space_id; - - /* - * Call H5Dfill function. - */ - ret = H5Dfill(fill_value, c_fill_type_id, buf, c_mem_type_id, c_space_id); - - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -int_f -nh5dfill_real_c (void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id) - -{ - int ret_value = -1; - herr_t ret; - hid_t c_fill_type_id; - hid_t c_mem_type_id; - hid_t c_space_id; - - c_fill_type_id = (hid_t)*fill_type_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_space_id = (hid_t)*space_id; - - /* - * Call H5Dfill function. - */ - ret = H5Dfill(fill_value, c_fill_type_id, buf, c_mem_type_id, c_space_id); - - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -int_f -nh5dfill_double_c (void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id) - -{ - int ret_value = -1; - herr_t ret; - hid_t c_fill_type_id; - hid_t c_mem_type_id; - hid_t c_space_id; - - c_fill_type_id = (hid_t)*fill_type_id; - c_mem_type_id = (hid_t)*mem_type_id; - c_space_id = (hid_t)*space_id; - - /* - * Call H5Dfill function. - */ - ret = H5Dfill(fill_value, c_fill_type_id, buf, c_mem_type_id, c_space_id); - - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - /****if* H5Df/h5dget_space_status_c * NAME * h5dget_space_status_c * PURPOSE * Call H5Dget_space_status to request dataspace allocation status * INPUTS - * dset_id - dataset identifier + * dset_id - dataset identifier * OUTPUTS - * flag - status flag + * flag - status flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12, 2003 + * Wednesday, March 12, 2003 * HISTORY * * SOURCE */ int_f -nh5dget_space_status_c ( hid_t_f *dset_id, int_f *flag) +h5dget_space_status_c ( hid_t_f *dset_id, int_f *flag) /******/ { int ret_value = -1; @@ -2256,21 +1108,21 @@ nh5dget_space_status_c ( hid_t_f *dset_id, int_f *flag) * loc_id - Identifier of the file or group within which to create the dataset. * type_id - Identifier of the datatype to use when creating the dataset. * space_id - Identifier of the dataspace to use when creating the dataset. - * dcpl_id - Dataset creation property list identifier. - * dapl_id - Dataset access property list identifier. + * dcpl_id - Dataset creation property list identifier. + * dapl_id - Dataset access property list identifier. * OUTPUTS * - * dset_id - dataset identifier + * dset_id - dataset identifier * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * SOURCE */ int_f -nh5dcreate_anon_c (hid_t_f *loc_id, hid_t_f *type_id, hid_t_f *space_id, +h5dcreate_anon_c (hid_t_f *loc_id, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *dcpl_id, hid_t_f *dapl_id, hid_t_f *dset_id) /******/ { @@ -2355,8 +1207,8 @@ h5dwrite_f_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, * file_space_id - file dataspace identifier * xfer - file transfer property * dims - one-demnsional array of size 2 - * dims[0] = MAXLENGTH - * dims[1] = number of elements of VL type + * dims[0] = MAXLENGTH + * dims[1] = number of elements of VL type * OUTPUTS * buf - data buffer * len - array element lenghts @@ -2396,9 +1248,9 @@ h5dread_f_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, ret_value = 0; return ret_value; } -/****if* H5Df/nh5dget_access_plist_c +/****if* H5Df/h5dget_access_plist_c * NAME - * nh5dget_access_plist_c + * h5dget_access_plist_c * PURPOSE * Call H5Dget_access_plist * INPUTS @@ -2414,7 +1266,7 @@ h5dread_f_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, * SOURCE */ int_f -nh5dget_access_plist_c (hid_t_f *dset_id, hid_t_f *plist_id) +h5dget_access_plist_c (hid_t_f *dset_id, hid_t_f *plist_id) /******/ { int ret_value = -1; @@ -2430,22 +1282,22 @@ nh5dget_access_plist_c (hid_t_f *dset_id, hid_t_f *plist_id) return ret_value; } -/****if* H5Df/nh5dvlen_reclaim_c +/****if* H5Df/h5dvlen_reclaim_c * NAME * h5dvlen_reclaim_c * PURPOSE * Call H5Dvlen_reclaim * INPUTS - * type_id - Identifier of the datatype. - * space_id - Identifier of the dataspace. - * plist_id - Identifier of the property list used to create the buffer. - * buf - Pointer to the buffer to be reclaimed. + * type_id - Identifier of the datatype. + * space_id - Identifier of the dataspace. + * plist_id - Identifier of the property list used to create the buffer. + * buf - Pointer to the buffer to be reclaimed. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January 15, 2011 + * January 15, 2011 * * SOURCE */ diff --git a/fortran/src/H5Dff.F90 b/fortran/src/H5Dff.F90 new file mode 100644 index 0000000..afdb5ba --- /dev/null +++ b/fortran/src/H5Dff.F90 @@ -0,0 +1,1878 @@ +!****h* ROBODoc/H5D +! +! NAME +! MODULE H5D +! +! FILE +! fortran/src/H5Dff.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5D functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! (1) The maximum rank of an array allowed in Fortran is 7, therefore +! we only provide an interface for arrays up to and including rank 7. +! +! (2) Unfortunately we are using a generic interface and one of the factors +! used in determining the proper routine to select is that of the array +! rank being passed. Therefore, we can not create just one subroutine for +! each array type (integer, real, etc...) and use a +! rank 1 array of assumed size to handle multiple ranks, i.e. +! (i.e. integer, dimension(*) :: ... ) +! (i.e. real , dimension(*) :: ... ) etc... +! +! (3) Could not place the USE, INTRINSIC :: ISO_C_BINDING in the module header because it may +! conflict with the USE, INTRINSIC :: ISO_C_BINDING included in the user's program. Moved +! the statement instead to each subroutine. +! +! +! (4) C_LOC and character strings according to the Fortran 2003 standard: +! +! 15.1.2.5 C_LOC(X) +! +! Argument. X shall either +! +! (A) have interoperable type and type parameters and be +! (a) a variable that has the TARGET attribute and is interoperable, +! (b) an allocated allocatable variable that has the TARGET attribute +! and is not an array of zero size, or +! (c) an associated scalar pointer, or +! (B) be a nonpolymorphic scalar, have no length type parameters, and be +! (a) a nonallocatable, nonpointer variable that has the TARGET attribute, +! (b) an allocated allocatable variable that has the TARGET attribute, or +! (c) an associated pointer. +! +! - When X is a character, for interoperability the standard is: +! +! 15.2.1 Interoperability of intrinsic types +! +! ...if the type is character, interoperability also requires that the length type parameter +! be omitted or be specified by an initialization expression whose value is one. +! +! THEREFORE compilers that have not extended the standard require the +! argument in C_LOC to be of the variant: +! +! CHARACTER(LEN=1), TARGET :: chr +! or +! CHARACTER, TARGET :: chr +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5D function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +#include + +MODULE H5D + + USE, INTRINSIC :: ISO_C_BINDING + USE H5GLOBAL + + INTERFACE h5dextend_f + MODULE PROCEDURE h5dset_extent_f + END INTERFACE + + INTERFACE h5dread_vl_f + MODULE PROCEDURE h5dread_vl_integer + MODULE PROCEDURE h5dread_vl_real + MODULE PROCEDURE h5dread_vl_string + END INTERFACE + + INTERFACE h5dwrite_vl_f + MODULE PROCEDURE h5dwrite_vl_integer + MODULE PROCEDURE h5dwrite_vl_real + MODULE PROCEDURE h5dwrite_vl_string + END INTERFACE + + INTERFACE h5dwrite_f + MODULE PROCEDURE h5dwrite_reference_obj + MODULE PROCEDURE h5dwrite_reference_dsetreg + MODULE PROCEDURE h5dwrite_char_scalar + ! This is the preferred way to call h5dwrite + ! by passing an address + MODULE PROCEDURE h5dwrite_ptr + END INTERFACE + + INTERFACE h5dread_f + MODULE PROCEDURE h5dread_reference_obj + MODULE PROCEDURE h5dread_reference_dsetreg + MODULE PROCEDURE h5dread_char_scalar + ! This is the preferred way to call h5dread + ! by passing an address + MODULE PROCEDURE h5dread_ptr + + END INTERFACE + + +! Interface for the function used to pass the C pointer of the buffer +! to the C H5Dwrite routine + + INTERFACE + INTEGER FUNCTION h5dwrite_f_c(dset_id, mem_type_id, & + mem_space_id_default , & + file_space_id_default, & + xfer_prp_default, buf ) BIND(C, NAME='h5dwrite_f_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + TYPE(C_PTR), VALUE :: buf + END FUNCTION h5dwrite_f_c + END INTERFACE + +! Interface for the function used to pass the C pointer of the buffer +! to the C H5Dread routine + + INTERFACE + INTEGER FUNCTION h5dread_f_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf) BIND(C, NAME='h5dread_f_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + TYPE(C_PTR), VALUE :: buf + END FUNCTION h5dread_f_c + END INTERFACE + + INTERFACE h5dfill_f + MODULE PROCEDURE h5dfill_integer + MODULE PROCEDURE h5dfill_c_float + MODULE PROCEDURE h5dfill_c_double +#ifdef H5_FORTRAN_HAVE_C_LONG_DOUBLE + MODULE PROCEDURE h5dfill_c_long_double +#endif + MODULE PROCEDURE h5dfill_char + END INTERFACE + +! Interface for the function used to pass the C pointer of the buffer +! to the C H5Dfill routine + + INTERFACE + INTEGER FUNCTION h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) BIND(C, NAME='h5dfill_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + TYPE(C_PTR), VALUE :: f_ptr_fill_value + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + TYPE(C_PTR), VALUE :: f_ptr_buf + INTEGER(HID_T) :: mem_type_id + END FUNCTION h5dfill_c + END INTERFACE + +CONTAINS + +! +!****s* H5D/h5dcreate_f +! +! NAME +! h5dcreate_f +! +! PURPOSE +! Creates a dataset at the specified location +! +! INPUTS +! loc_id - file or group identifier +! name - dataset name +! type_id - dataset datatype identifier +! space_id - dataset dataspace identifier +! OUTPUTS +! dset_id - dataset identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! creation_prp - Dataset creation property list +! lcpl_id - Link creation property list +! dapl_id - Dataset access property list +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! +! - Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! - Added version's 1.8 new optional parameters +! February, 2008 +! +! SOURCE + SUBROUTINE h5dcreate_f(loc_id, name, type_id, space_id, dset_id, & + hdferr, dcpl_id, lcpl_id, dapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier + INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dcpl_id ! Dataset creation property list + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: dcpl_id_default + INTEGER(HID_T) :: dapl_id_default + + INTEGER :: namelen ! Name length + + INTERFACE + INTEGER FUNCTION h5dcreate_c(loc_id, name, namelen, type_id, & + space_id, lcpl_id_default, dcpl_id_default, dapl_id_default, dset_id) & + BIND(C,NAME='h5dcreate_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: dcpl_id_default + INTEGER(HID_T) :: dapl_id_default + + INTEGER(HID_T), INTENT(OUT) :: dset_id + END FUNCTION h5dcreate_c + END INTERFACE + + lcpl_id_default = H5P_DEFAULT_F + dcpl_id_default = H5P_DEFAULT_F + dapl_id_default = H5P_DEFAULT_F + + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + IF(PRESENT(dcpl_id)) dcpl_id_default = dcpl_id + IF(PRESENT(dapl_id)) dapl_id_default = dapl_id + + namelen = LEN(name) + hdferr = h5dcreate_c(loc_id, name, namelen, type_id, space_id, & + lcpl_id_default, dcpl_id_default, dapl_id_default, dset_id) + + END SUBROUTINE h5dcreate_f + +! +!****s* H5D/h5dopen_f +! +! NAME +! h5dopen_f +! +! PURPOSE +! Opens an existing dataset. +! +! INPUTS +! loc_id - file or group identifier +! name - dataset name +! OUTPUTS +! dset_id - dataset identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! dapl_id - Dataset access property list +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! -Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! -Added 1.8 (optional) parameter dapl_id +! February, 2008, M. Scot Breitenfeld +! +! SOURCE + SUBROUTINE h5dopen_f(loc_id, name, dset_id, hdferr, dapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset + INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list +!***** + INTEGER :: namelen ! Name length + + INTEGER(HID_T) :: dapl_id_default + + INTERFACE + INTEGER FUNCTION h5dopen_c(loc_id, name, namelen, dapl_id_default, dset_id) & + BIND(C,NAME='h5dopen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(IN) :: dapl_id_default + INTEGER(HID_T), INTENT(OUT) :: dset_id + END FUNCTION h5dopen_c + END INTERFACE + + dapl_id_default = H5P_DEFAULT_F + IF(PRESENT(dapl_id)) dapl_id_default = dapl_id + + namelen = LEN(name) + hdferr = h5dopen_c(loc_id, name, namelen, dapl_id_default, dset_id) + + END SUBROUTINE h5dopen_f + +! +!****s* H5D/h5dclose_f +! +! NAME +! h5dclose_f +! +! PURPOSE +! Closes a dataset. +! +! INPUTS +! dset_id - dataset identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5dclose_f(dset_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dclose_c(dset_id) & + BIND(C,NAME='h5dclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + END FUNCTION h5dclose_c + END INTERFACE + + hdferr = h5dclose_c(dset_id) + + END SUBROUTINE h5dclose_f + +! +!****s* H5D/h5dget_type_f +! +! NAME +! h5dget_type_f +! +! PURPOSE +! Returns an identifier for a copy of the datatype for a +! dataset. +! +! INPUTS +! dataset_id - dataset identifier +! OUTPUTS +! datatype_id - dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! +! SOURCE + SUBROUTINE h5dget_type_f(dataset_id, datatype_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HID_T), INTENT(OUT) :: datatype_id ! Datatype identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dget_type_c(dataset_id, datatype_id) & + BIND(C,NAME='h5dget_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HID_T), INTENT(OUT) :: datatype_id + END FUNCTION h5dget_type_c + END INTERFACE + + hdferr = h5dget_type_c (dataset_id, datatype_id) + END SUBROUTINE h5dget_type_f + +! +!****s* H5D/h5dset_extent +! +! NAME +! h5dset_extent (instead of obsolete name: h5dextend_f) +! +! PURPOSE +! Extends a dataset with unlimited dimension. +! +! INPUTS +! dataset_id - dataset identifier +! size - array containing the new magnitude of +! each dimension +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! Changed name from the now obsolete h5dextend_f +! to h5dset_extent_f. Provided interface to old name +! for backward compatability. -MSB- March 14, 2008 +! +! SOURCE + SUBROUTINE h5dset_extent_f(dataset_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: size + ! Array containing + ! dimensions' sizes + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dset_extent_c(dataset_id, size) & + BIND(C,NAME='h5dset_extent_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: size + END FUNCTION h5dset_extent_c + END INTERFACE + + hdferr = H5Dset_extent_c(dataset_id, size) + END SUBROUTINE h5dset_extent_f + +!****s* H5D/h5dget_create_plist_f +! +! NAME +! h5dget_create_plist_f +! +! PURPOSE +! Returns an identifier for a copy of the dataset creation +! property list for a dataset. +! +! INPUTS +! dataset_id - dataset identifier +! OUTPUTS +! plist_id - creation property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! SOURCE + SUBROUTINE h5dget_create_plist_f(dataset_id, plist_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HID_T), INTENT(OUT) :: plist_id ! Dataset creation + ! property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dget_create_plist_c(dataset_id, plist_id) & + BIND(C,NAME='h5dget_create_plist_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HID_T), INTENT(OUT) :: plist_id + END FUNCTION h5dget_create_plist_c + END INTERFACE + + hdferr = h5dget_create_plist_c(dataset_id, plist_id) + END SUBROUTINE h5dget_create_plist_f + +! +!****s* H5D/h5dget_storage_size_f +! +! NAME +! h5dget_storage_size_f +! +! PURPOSE +! Returns the amount of storage requires by a dataset +! +! INPUTS +! dataset_id - dataset identifier +! OUTPUTS +! size - datastorage size +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 15, 2002 +! SOURCE + SUBROUTINE h5dget_storage_size_f(dataset_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Amount of storage + ! allocated for dataset + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dget_storage_size_c(dataset_id, size) & + BIND(C,NAME='h5dget_storage_size_c') + IMPORT :: HID_T, HSIZE_T + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5dget_storage_size_c + END INTERFACE + + hdferr = h5dget_storage_size_c(dataset_id, size) + END SUBROUTINE h5dget_storage_size_f + +! +!****s* H5D/h5dvlen_get_max_len_f +! +! NAME +! h5dvlen_get_max_len_f +! +! PURPOSE +! Returns maximum length of the VL array elements +! +! INPUTS +! dataset_id - dataset identifier +! type_id - datatype identifier +! space_id - dataspace identifier +! OUTPUTS +! size - buffer size +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! October 15, 2002 +! +! SOURCE + SUBROUTINE h5dvlen_get_max_len_f(dataset_id, type_id, space_id, len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier + INTEGER(SIZE_T), INTENT(OUT) :: len ! Maximum length of the element + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dvlen_get_max_len_c(dataset_id, type_id, space_id, len) & + BIND(C,NAME='h5dvlen_get_max_len_c') + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(SIZE_T), INTENT(OUT) :: len + END FUNCTION h5dvlen_get_max_len_c + END INTERFACE + + hdferr = h5dvlen_get_max_len_c(dataset_id, type_id, space_id, len) + END SUBROUTINE h5dvlen_get_max_len_f + +! +!****s* H5D/h5dget_space_status_f +! +! NAME +! h5dget_space_status_f +! +! PURPOSE +! Returns the status of data space allocation. +! +! INPUTS +! dset_id - dataset identifier +! OUTPUTS +! flag - status; may have one of the following values: +! H5D_SPACE_STS_ERROR_F +! H5D_SPACE_STS_NOT_ALLOCATED_F +! H5D_SPACE_STS_PART_ALLOCATED_F +! H5D_SPACE_STS_ALLOCATED_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! SOURCE + SUBROUTINE h5dget_space_status_f(dset_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataspace identifier + INTEGER, INTENT(OUT) :: flag ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + !***** + INTERFACE + INTEGER FUNCTION h5dget_space_status_c(dset_id, flag) & + BIND(C,NAME='h5dget_space_status_c') + IMPORT :: HID_T + INTEGER(HID_T) :: dset_id + INTEGER :: flag + END FUNCTION h5dget_space_status_c + END INTERFACE + + hdferr = h5dget_space_status_c(dset_id, flag) + END SUBROUTINE h5dget_space_status_f + +! +!****s* H5D/h5dcreate_anon_f +! +! NAME +! h5dcreate_anon_f +! +! PURPOSE +! Creates a dataset in a file without linking it into the file structure +! +! INPUTS +! loc_id - Identifier of the file or group within which to create the dataset. +! type_id - Identifier of the datatype to use when creating the dataset. +! space_id - Identifier of the dataspace to use when creating the dataset. +! OUTPUTS +! dset_id - dataset identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! dcpl_id - Dataset creation property list identifier. +! dapl_id - Dataset access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! February 11, 2008 +! +! SOURCE + SUBROUTINE h5dcreate_anon_f(loc_id, type_id, space_id, dset_id, hdferr, dcpl_id, dapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier. + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier. + INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier. + INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier. + INTEGER, INTENT(OUT) :: hdferr ! Error code. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dcpl_id ! Dataset creation property list identifier. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list identifier. +!***** + INTEGER(HID_T) :: dcpl_id_default + INTEGER(HID_T) :: dapl_id_default + + ! + ! MS FORTRAN needs explicit interface for C functions called here. + ! + INTERFACE + INTEGER FUNCTION h5dcreate_anon_c(loc_id, type_id, space_id, dcpl_id_default, dapl_id_default, dset_id) & + BIND(C,NAME='h5dcreate_anon_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T) :: dcpl_id_default + INTEGER(HID_T) :: dapl_id_default + INTEGER(HID_T), INTENT(OUT) :: dset_id + END FUNCTION h5dcreate_anon_c + END INTERFACE + + dcpl_id_default = H5P_DEFAULT_F + dapl_id_default = H5P_DEFAULT_F + + IF(PRESENT(dcpl_id)) dcpl_id_default = dcpl_id + IF(PRESENT(dapl_id)) dapl_id_default = dapl_id + + hdferr = h5dcreate_anon_c(loc_id, type_id, space_id, dcpl_id_default, dapl_id_default, dset_id) + + END SUBROUTINE h5dcreate_anon_f + + SUBROUTINE h5dwrite_vl_integer(dset_id, mem_type_id, buf, dims, len, & + hdferr, & + mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len ! Array to store + ! the length of each + ! element + INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2)), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + INTERFACE + INTEGER FUNCTION h5dwrite_vl_integer_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf, dims, len) & + BIND(C,NAME='h5dwrite_vl_integer_c') + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len + INTEGER, INTENT(IN), DIMENSION(dims(1),dims(2)) :: buf + END FUNCTION h5dwrite_vl_integer_c + END INTERFACE + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dwrite_vl_integer_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, len) + + END SUBROUTINE h5dwrite_vl_integer + + SUBROUTINE h5dread_vl_integer(dset_id, mem_type_id, buf, dims, len, & + hdferr, & + mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem + INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len ! Array to store + ! the length of each + ! element + INTEGER, INTENT(INOUT), & + DIMENSION(dims(1),dims(2)), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! -1 if failed, 0 otherwise + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: tmp + INTEGER :: error + + INTERFACE + INTEGER FUNCTION h5dread_vl_integer_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf, dims, len) & + BIND(C,NAME='h5dread_vl_integer_c') + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len + INTEGER, INTENT(INOUT), DIMENSION(dims(1),dims(2)) :: buf + END FUNCTION h5dread_vl_integer_c + END INTERFACE + + CALL h5dget_space_f(dset_id, tmp, error) + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = tmp + file_space_id_default = tmp + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dread_vl_integer_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, len) + + END SUBROUTINE h5dread_vl_integer + + SUBROUTINE h5dwrite_vl_real(dset_id, mem_type_id, buf, dims, len, & + hdferr, & + mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len ! Array to store + ! the length of each + ! element + REAL, INTENT(IN), & + DIMENSION(dims(1),dims(2)) :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + INTERFACE + INTEGER FUNCTION h5dwrite_vl_real_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf, dims, len) & + BIND(C,NAME='h5dwrite_vl_real_c') + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len + REAL, INTENT(IN), & + DIMENSION(dims(1),dims(2)) :: buf + END FUNCTION h5dwrite_vl_real_c + END INTERFACE + + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dwrite_vl_real_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, len) + + END SUBROUTINE h5dwrite_vl_real + + SUBROUTINE h5dread_vl_real(dset_id, mem_type_id, buf, dims, len, & + hdferr, & + mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem + INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len ! Array to store the length of each element + REAL, INTENT(INOUT), & + DIMENSION(dims(1),dims(2)) :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! -1 if failed, 0 otherwise + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: tmp + INTEGER :: error + + INTERFACE + INTEGER FUNCTION h5dread_vl_real_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf, dims, len) & + BIND(C,NAME='h5dread_vl_real_c') + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len + REAL, INTENT(INOUT), & + DIMENSION(dims(1),dims(2)) :: buf + END FUNCTION h5dread_vl_real_c + END INTERFACE + + CALL h5dget_space_f(dset_id, tmp, error) + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = tmp + file_space_id_default = tmp + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dread_vl_real_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, len) + + END SUBROUTINE h5dread_vl_real + + SUBROUTINE h5dwrite_vl_string(dset_id, mem_type_id, buf, dims, str_len, & + hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! Number of strings + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: str_len ! Array to store the length of each element + CHARACTER(LEN=*), INTENT(IN), DIMENSION(dims(2)) :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + INTERFACE + INTEGER FUNCTION h5dwrite_vl_string_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + ! xfer_prp_default, tmp_buf, dims, str_len) + xfer_prp_default, buf, dims, str_len) & + BIND(C,NAME='h5dwrite_vl_string_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims + INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: str_len + CHARACTER(KIND=C_CHAR), DIMENSION(dims(2)) :: buf + END FUNCTION + END INTERFACE + + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dwrite_vl_string_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, str_len) + + END SUBROUTINE h5dwrite_vl_string + + SUBROUTINE h5dread_vl_string(dset_id, mem_type_id, buf, dims, str_len, & + hdferr, mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! number of strings + INTEGER(SIZE_T), INTENT(OUT), DIMENSION(*) :: str_len ! Array to store + ! the length of each + ! element + CHARACTER(LEN=*), INTENT(OUT), & + DIMENSION(dims(2)) :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + INTERFACE + INTEGER FUNCTION h5dread_vl_string_c(dset_id, mem_type_id, & + mem_space_id_default, & + file_space_id_default, & + xfer_prp_default, buf, dims, str_len) & + BIND(C,NAME='h5dread_vl_string_c') + IMPORT :: c_char + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims + INTEGER(SIZE_T), INTENT(OUT), DIMENSION(*) :: str_len + CHARACTER(KIND=C_CHAR), DIMENSION(dims(2)) :: buf + END FUNCTION h5dread_vl_string_c + END INTERFACE + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dread_vl_string_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, & + buf, dims, str_len) + RETURN + END SUBROUTINE h5dread_vl_string + +! +!****s* H5D/h5dget_offset_f +! +! NAME +! h5dget_offset_f +! +! PURPOSE +! Returns dataset address in file. +! +! INPUTS +! dataset_id - Dataset identifier. +! OUTPUTS +! offset - The offset in bytes. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! April 16, 2015 +! +! SOURCE + SUBROUTINE h5dget_offset_f(dset_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HADDR_T), INTENT(OUT) :: offset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER(HADDR_T) FUNCTION h5dget_offset(dset_id) BIND(C,NAME='H5Dget_offset') + IMPORT :: HID_T, HADDR_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN), VALUE :: dset_id + END FUNCTION h5dget_offset + END INTERFACE + + offset = h5dget_offset(dset_id) + + hdferr = 0 + IF(offset .LT. 0) hdferr = -1 + + END SUBROUTINE h5dget_offset_f + +! +!****s* H5D/h5dget_space_f +! +! NAME +! h5dget_space_f +! +! PURPOSE +! Returns an identifier for a copy of the dataspace for a +! dataset. +! +! INPUTS +! dataset_id - dataset identifier +! OUTPUTS +! dataspace_id - dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5dget_space_f(dataset_id, dataspace_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier + INTEGER(HID_T), INTENT(OUT) :: dataspace_id ! Dataspace identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5dget_space_c(dataset_id, dataspace_id) BIND(C,NAME='h5dget_space_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dataset_id + INTEGER(HID_T), INTENT(OUT) :: dataspace_id + END FUNCTION h5dget_space_c + END INTERFACE + + hdferr = h5dget_space_c(dataset_id, dataspace_id) + END SUBROUTINE h5dget_space_f + +!****s* H5D/h5dget_access_plist_f +! +! NAME +! h5dget_access_plist_f +! +! PURPOSE +! Returns a copy of the dataset creation property list. +! +! INPUTS +! dset_id - Dataset identifier +! +! OUTPUTS +! plist_id - Dataset access property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! +! SOURCE + SUBROUTINE h5dget_access_plist_f(dset_id, plist_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(OUT) :: plist_id + INTEGER , INTENT(OUT) :: hdferr + !***** + INTERFACE + INTEGER FUNCTION h5dget_access_plist_c(dset_id, plist_id) BIND(C,NAME='h5dget_access_plist_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(OUT) :: plist_id + END FUNCTION h5dget_access_plist_c + END INTERFACE + + hdferr = h5dget_access_plist_c(dset_id, plist_id) + + END SUBROUTINE h5dget_access_plist_f + + + SUBROUTINE h5dwrite_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf + TYPE(hobj_ref_t_f), DIMENSION(dims(1)), INTENT(IN), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + TYPE(C_PTR) :: f_ptr + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + f_ptr = C_LOC(buf(1)) + + hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, f_ptr) + + END SUBROUTINE h5dwrite_reference_obj + + SUBROUTINE h5dwrite_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf + TYPE(hdset_reg_ref_t_f), DIMENSION(dims(1)), INTENT(IN), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf + INTEGER :: i + INTEGER(HSIZE_T) :: j + TYPE(C_PTR) :: f_ptr + INTERFACE + INTEGER FUNCTION h5dwrite_ref_reg_c(dset_id, mem_type_id,& + mem_space_id_default, & + file_space_id_default, xfer_prp_default, ref_buf, dims) & + BIND(C,NAME='h5dwrite_ref_reg_c') + IMPORT :: HID_T, HSIZE_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER, DIMENSION(*) :: ref_buf + INTEGER(HSIZE_T), DIMENSION(*) :: dims + END FUNCTION h5dwrite_ref_reg_c + END INTERFACE + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + f_ptr = C_LOC(buf(1)) + + ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) + IF (hdferr .NE. 0 ) THEN + hdferr = -1 + RETURN + ELSE + DO j = 1, dims(1) + DO i = 1, REF_REG_BUF_LEN + ref_buf(REF_REG_BUF_LEN*(j-1) + i) = buf(j)%ref(i) + ENDDO + ENDDO + ENDIF + hdferr = h5dwrite_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, ref_buf, dims) + DEALLOCATE(ref_buf) + + END SUBROUTINE h5dwrite_reference_dsetreg + + SUBROUTINE h5dwrite_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + CHARACTER(*), INTENT(IN), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + CALL h5dwrite_char_scalar_fix(dset_id, mem_type_id, buf, LEN(buf), dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + + END SUBROUTINE h5dwrite_char_scalar + + SUBROUTINE h5dwrite_char_scalar_fix(dset_id, mem_type_id, buf, buf_len, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER, INTENT(IN) :: buf_len + CHARACTER(LEN=buf_len), INTENT(IN), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + TYPE(C_PTR) :: f_ptr + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + + f_ptr = C_LOC(buf(1:1)) + + hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, f_ptr) + + END SUBROUTINE h5dwrite_char_scalar_fix + + SUBROUTINE h5dread_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + TYPE(hobj_ref_t_f), INTENT(INOUT) , & + DIMENSION(dims(1)), TARGET :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + TYPE(C_PTR) :: f_ptr + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + f_ptr = C_LOC(buf(1)) + + hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, f_ptr) + + END SUBROUTINE h5dread_reference_obj + + SUBROUTINE h5dread_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + TYPE(hdset_reg_ref_t_f), INTENT(INOUT), & + DIMENSION(dims(1)), TARGET :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf + INTEGER :: i + INTEGER(HSIZE_T) :: j + INTERFACE + INTEGER FUNCTION h5dread_ref_reg_c(dset_id, mem_type_id,& + mem_space_id_default, & + file_space_id_default, xfer_prp_default, ref_buf, dims) & + BIND(C,NAME='h5dread_ref_reg_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HID_T), INTENT(IN) :: mem_type_id + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + INTEGER, DIMENSION(*) :: ref_buf + END FUNCTION h5dread_ref_reg_c + END INTERFACE + + ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dread_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, ref_buf, dims) + + DO j = 1, dims(1) + DO i = 1, REF_REG_BUF_LEN + buf(j)%ref(i) = ref_buf(REF_REG_BUF_LEN*(j-1) + i) + ENDDO + ENDDO + DEALLOCATE(ref_buf) + + END SUBROUTINE h5dread_reference_dsetreg + + SUBROUTINE h5dread_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims + CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF(PRESENT(file_space_id)) file_space_id_default = file_space_id + + CALL h5dread_char_scalar_fix(dset_id, mem_type_id, buf, LEN(buf), hdferr, & + mem_space_id_default, file_space_id_default, xfer_prp_default) + + END SUBROUTINE h5dread_char_scalar + + SUBROUTINE h5dread_char_scalar_fix(dset_id, mem_type_id, buf, buf_len, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + INTEGER, INTENT(IN) :: buf_len + CHARACTER(LEN=buf_len), INTENT(INOUT), TARGET :: buf ! Data buffer + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1:1)) + + hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id, & + file_space_id, xfer_prp, f_ptr) + + END SUBROUTINE h5dread_char_scalar_fix + +!****s* H5D (F03)/h5dwrite_f_F03 +! +! NAME +! h5dwrite_f_F03 +! +! PURPOSE +! Writes raw data from a dataset into a buffer. +! +! Inputs: +! dset_id - Identifier of the dataset to write to. +! mem_type_id - Identifier of the memory datatype. +! buf - Buffer with data to be written to the file. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! mem_space_id - Identifier of the memory dataspace. +! file_space_id - Identifier of the dataset's dataspace in the file. +! xfer_prp - Identifier of a transfer property list for this I/O operation. +! +! AUTHOR +! M. Scot Breitenfeld +! September 17, 2011 +! +! Fortran2003 Interface: +!! SUBROUTINE h5dwrite_f(dset_id, mem_type_id, buf, hdferr, & +!! mem_space_id, file_space_id, xfer_prp) +!! INTEGER(HID_T), INTENT(IN) :: dset_id +!! INTEGER(HID_T), INTENT(IN) :: mem_type_id +!! TYPE(C_PTR) , INTENT(IN) :: buf +!! INTEGER , INTENT(OUT) :: hdferr +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: mem_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: file_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: xfer_prp +!***** + SUBROUTINE h5dwrite_ptr(dset_id, mem_type_id, buf, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + TYPE(C_PTR), INTENT(IN) :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, buf) + + END SUBROUTINE h5dwrite_ptr + +!****s* H5D (F03)/h5dread_f_F03 +! +! NAME +! h5dread_f_F03 +! +! PURPOSE +! Reads raw data from a dataset into a buffer. +! +! Inputs: +! dset_id - Identifier of the dataset read from. +! mem_type_id - Identifier of the memory datatype. +! +! Outputs: +! buf - Buffer to receive data read from file. +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! mem_space_id - Identifier of the memory dataspace. +! file_space_id - Identifier of the dataset's dataspace in the file. +! xfer_prp - Identifier of a transfer property list for this I/O operation. +! +! AUTHOR +! M. Scot Breitenfeld +! September 17, 2011 +! +! Fortran2003 Interface: +!! SUBROUTINE h5dread_f(dset_id, mem_type_id, buf, hdferr, & +!! mem_space_id, file_space_id, xfer_prp) +!! INTEGER(HID_T), INTENT(IN) :: dset_id +!! INTEGER(HID_T), INTENT(IN) :: mem_type_id +!! TYPE(C_PTR) , INTENT(INOUT) :: buf +!! INTEGER , INTENT(OUT) :: hdferr +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: mem_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: file_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: xfer_prp +!***** + SUBROUTINE h5dread_ptr(dset_id, mem_type_id, buf, hdferr, & + mem_space_id, file_space_id, xfer_prp) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier + TYPE(C_PTR), INTENT(INOUT) :: buf + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier + + INTEGER(HID_T) :: xfer_prp_default + INTEGER(HID_T) :: mem_space_id_default + INTEGER(HID_T) :: file_space_id_default + + xfer_prp_default = H5P_DEFAULT_F + mem_space_id_default = H5S_ALL_F + file_space_id_default = H5S_ALL_F + + IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp + IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id + IF (PRESENT(file_space_id)) file_space_id_default = file_space_id + + hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & + file_space_id_default, xfer_prp_default, buf) + + END SUBROUTINE h5dread_ptr + +! +! NAME +! h5dfill_integer +! +! PURPOSE +! Fills dataspace elements with a fill value in a memory buffer. +! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes +! of the fillvalues and buffers are supported. Buffer and fillvalue +! are assumed to have the same datatype. +! Only one-dimesional buffers are supported. +! +! Inputs: +! fill_value - fill value +! space_id - memory space selection identifier +! buf - data buffer iin memory ro apply selection to +! - of k-th dimension of the buf array +! Outputs: +! hdferr: - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! + + SUBROUTINE h5dfill_integer(fill_value, space_id, buf, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER, INTENT(IN), TARGET :: fill_value ! Fill value + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + INTEGER, INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier + + TYPE(C_PTR) :: f_ptr_fill_value ! C pointer to fill_value + TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf + + f_ptr_fill_value = C_LOC(fill_value) + f_ptr_buf = C_LOC(buf(1)) + + fill_type_id = H5T_NATIVE_INTEGER + mem_type_id = H5T_NATIVE_INTEGER + + hdferr = h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) + + END SUBROUTINE h5dfill_integer + +! +! NAME +! h5dfill_c_float +! +! PURPOSE +! Fills dataspace elements with a fill value in a memory buffer. +! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes +! of the fillvalues and buffers are supported. Buffer and fillvalue +! are assumed to have the same datatype. +! Only one-dimesional buffers are supported. +! +! Inputs: +! fill_value - fill value +! space_id - memory space selection identifier +! buf - data buffer iin memory ro apply selection to +! - of k-th dimension of the buf array +! Outputs: +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! + SUBROUTINE h5dfill_c_float(fill_valuer, space_id, buf, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + REAL(KIND=C_FLOAT), INTENT(IN), TARGET :: fill_valuer ! Fill value + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + REAL(KIND=C_FLOAT), INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier + + TYPE(C_PTR) :: f_ptr_fill_valuer ! C pointer to fill_value + TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf + + f_ptr_fill_valuer = C_LOC(fill_valuer) + f_ptr_buf = C_LOC(buf(1)) + + fill_type_id = H5T_NATIVE_REAL + mem_type_id = H5T_NATIVE_REAL + + hdferr = h5dfill_c(f_ptr_fill_valuer, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) + + END SUBROUTINE h5dfill_c_float + + !---------------------------------------------------------------------- + ! Name: h5dfill_c_double + ! + ! Purpose: Fills dataspace elements with a fill value in a memory buffer. + ! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes + ! of the fillvalues and buffers are supported. Buffer and fillvalue + ! are assumed to have the same datatype. + ! Only one-dimesional buffers are supported. + ! + ! Inputs: + ! fill_value - fill value + ! space_id - memory space selection identifier + ! buf - data buffer iin memory ro apply selection to + ! - of k-th dimension of the buf array + ! Outputs: + ! hdferr: - error code + ! Success: 0 + ! Failure: -1 + ! + ! Programmer: Elena Pourmal + ! March 12, 2003 + ! + !---------------------------------------------------------------------- + + SUBROUTINE h5dfill_c_double(fill_value, space_id, buf, hdferr) + IMPLICIT NONE + REAL(KIND=C_DOUBLE), INTENT(IN), TARGET :: fill_value ! Fill value + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + REAL(KIND=C_DOUBLE), INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier + + TYPE(C_PTR) :: f_ptr_fill_valuer ! C pointer to fill_value + TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf + + f_ptr_fill_valuer = C_LOC(fill_value) + f_ptr_buf = C_LOC(buf(1)) + + fill_type_id = H5T_NATIVE_DOUBLE + mem_type_id = H5T_NATIVE_DOUBLE + + hdferr = h5dfill_c(f_ptr_fill_valuer, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) + + END SUBROUTINE h5dfill_c_double + +#ifdef H5_FORTRAN_HAVE_C_LONG_DOUBLE + SUBROUTINE h5dfill_c_long_double(fill_value, space_id, buf, hdferr) + IMPLICIT NONE + REAL(KIND=C_LONG_DOUBLE), INTENT(IN), TARGET :: fill_value ! Fill value + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + REAL(KIND=C_LONG_DOUBLE), INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier + + TYPE(C_PTR) :: f_ptr_fill_valuer ! C pointer to fill_value + TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf + + f_ptr_fill_valuer = C_LOC(fill_value) + f_ptr_buf = C_LOC(buf(1)) + + fill_type_id = H5T_NATIVE_DOUBLE + mem_type_id = H5T_NATIVE_DOUBLE + + hdferr = h5dfill_c(f_ptr_fill_valuer, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) + + END SUBROUTINE h5dfill_c_long_double +#endif +! +! NAME +! h5dfill_char +! +! PURPOSE +! Fills dataspace elements with a fill value in a memory buffer. +! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes +! of the fillvalues and buffers are supported. Buffer and fillvalue +! are assumed to have the same datatype. +! Only one-dimesional buffers are supported. +! +! Inputs: +! fill_value - fill value +! space_id - memory space selection identifier +! buf - data buffer iin memory ro apply selection to +! - of k-th dimension of the buf array +! Outputs: +! hdferr: - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! + SUBROUTINE h5dfill_char(fill_value, space_id, buf, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + CHARACTER, INTENT(IN), TARGET :: fill_value ! Fill value + INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier + CHARACTER, INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier + INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier + + TYPE(C_PTR) :: f_ptr_fill_value ! C pointer to fill_value + TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf + + f_ptr_fill_value = C_LOC(fill_value) + f_ptr_buf = C_LOC(buf(1)) + + hdferr = h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & + f_ptr_buf, mem_type_id) + + END SUBROUTINE h5dfill_char +! +!****s* H5D (F03)/h5dvlen_reclaim_f +! NAME +! h5dvlen_reclaim_f +! +! PURPOSE +! Reclaims VL datatype memory buffers. +! +! Inputs: +! +! type_id - Identifier of the datatype. +! space_id - Identifier of the dataspace. +! plist_id - Identifier of the property list used to create the buffer. +! buf - Pointer to the buffer to be reclaimed. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! January 11, 2011 +! +! Fortran2003 Interface: + SUBROUTINE h5dvlen_reclaim_f(type_id, space_id, plist_id, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(IN) :: plist_id + TYPE(C_PTR) , INTENT(INOUT) :: buf + INTEGER , INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5dvlen_reclaim_c(type_id, space_id, plist_id, buf) BIND(C, NAME='h5dvlen_reclaim_c') + IMPORT :: C_PTR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T) :: type_id + INTEGER(HID_T) :: space_id + INTEGER(HID_T) :: plist_id + TYPE(C_PTR), VALUE :: buf + END FUNCTION h5dvlen_reclaim_c + END INTERFACE + + hdferr = H5Dvlen_reclaim_c(type_id, space_id, plist_id, buf) + + END SUBROUTINE H5Dvlen_reclaim_f + + +END MODULE H5D + + diff --git a/fortran/src/H5Dff.f90 b/fortran/src/H5Dff.f90 deleted file mode 100644 index 3ad868c..0000000 --- a/fortran/src/H5Dff.f90 +++ /dev/null @@ -1,1035 +0,0 @@ -!****h* ROBODoc/H5D -! -! NAME -! MODULE H5D -! -! FILE -! fortran/src/H5Dff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5D functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5D - USE H5GLOBAL - - INTERFACE h5dextend_f - MODULE PROCEDURE h5dset_extent_f - END INTERFACE - - INTERFACE h5dread_vl_f - MODULE PROCEDURE h5dread_vl_integer - MODULE PROCEDURE h5dread_vl_real - MODULE PROCEDURE h5dread_vl_string - END INTERFACE - - INTERFACE h5dwrite_vl_f - MODULE PROCEDURE h5dwrite_vl_integer - MODULE PROCEDURE h5dwrite_vl_real - MODULE PROCEDURE h5dwrite_vl_string - END INTERFACE - -CONTAINS - -! -!****s* H5D/h5dcreate_f -! -! NAME -! h5dcreate_f -! -! PURPOSE -! Creates a dataset at the specified location -! -! INPUTS -! loc_id - file or group identifier -! name - dataset name -! type_id - dataset datatype identifier -! space_id - dataset dataspace identifier -! OUTPUTS -! dset_id - dataset identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! creation_prp - Dataset creation property list -! lcpl_id - Link creation property list -! dapl_id - Dataset access property list -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! - Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! - Added version's 1.8 new optional parameters -! February, 2008 -! -! SOURCE - SUBROUTINE h5dcreate_f(loc_id, name, type_id, space_id, dset_id, & - hdferr, dcpl_id, lcpl_id, dapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dcpl_id ! Dataset creation property list - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: dcpl_id_default - INTEGER(HID_T) :: dapl_id_default - - INTEGER :: namelen ! Name length - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5dcreate_c(loc_id, name, namelen, type_id, & - space_id, lcpl_id_default, dcpl_id_default, dapl_id_default, dset_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DCREATE_C'::h5dcreate_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: dcpl_id_default - INTEGER(HID_T) :: dapl_id_default - - INTEGER(HID_T), INTENT(OUT) :: dset_id - END FUNCTION h5dcreate_c - END INTERFACE - - lcpl_id_default = H5P_DEFAULT_F - dcpl_id_default = H5P_DEFAULT_F - dapl_id_default = H5P_DEFAULT_F - - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - IF(PRESENT(dcpl_id)) dcpl_id_default = dcpl_id - IF(PRESENT(dapl_id)) dapl_id_default = dapl_id - - namelen = LEN(name) - hdferr = h5dcreate_c(loc_id, name, namelen, type_id, space_id, & - lcpl_id_default, dcpl_id_default, dapl_id_default, dset_id) - - END SUBROUTINE h5dcreate_f - -! -!****s* H5D/h5dopen_f -! -! NAME -! h5dopen_f -! -! PURPOSE -! Opens an existing dataset. -! -! INPUTS -! loc_id - file or group identifier -! name - dataset name -! OUTPUTS -! dset_id - dataset identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! dapl_id - Dataset access property list -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! -Added 1.8 (optional) parameter dapl_id -! February, 2008, M. Scot Breitenfeld -! -! SOURCE - SUBROUTINE h5dopen_f(loc_id, name, dset_id, hdferr, dapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset - INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list -!***** - INTEGER :: namelen ! Name length - - INTEGER(HID_T) :: dapl_id_default - - INTERFACE - INTEGER FUNCTION h5dopen_c(loc_id, name, namelen, dapl_id_default, dset_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DOPEN_C'::h5dopen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: dapl_id_default - INTEGER(HID_T), INTENT(OUT) :: dset_id - END FUNCTION h5dopen_c - END INTERFACE - - dapl_id_default = H5P_DEFAULT_F - IF(PRESENT(dapl_id)) dapl_id_default = dapl_id - - namelen = LEN(name) - hdferr = h5dopen_c(loc_id, name, namelen, dapl_id_default, dset_id) - - END SUBROUTINE h5dopen_f - -! -!****s* H5D/h5dclose_f -! -! NAME -! h5dclose_f -! -! PURPOSE -! Closes a dataset. -! -! INPUTS -! dset_id - dataset identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5dclose_f(dset_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dclose_c(dset_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DCLOSE_C'::h5dclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - END FUNCTION h5dclose_c - END INTERFACE - - hdferr = h5dclose_c(dset_id) - - END SUBROUTINE h5dclose_f - -! -!****s* H5D/h5dget_type_f -! -! NAME -! h5dget_type_f -! -! PURPOSE -! Returns an identifier for a copy of the datatype for a -! dataset. -! -! INPUTS -! dataset_id - dataset identifier -! OUTPUTS -! datatype_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! -! SOURCE - SUBROUTINE h5dget_type_f(dataset_id, datatype_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HID_T), INTENT(OUT) :: datatype_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dget_type_c (dataset_id, datatype_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_TYPE_C'::h5dget_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HID_T), INTENT(OUT) :: datatype_id - END FUNCTION h5dget_type_c - END INTERFACE - - hdferr = h5dget_type_c (dataset_id, datatype_id) - END SUBROUTINE h5dget_type_f - -! -!****s* H5D/h5dset_extent -! -! NAME -! h5dset_extent (instead of obsolete name: h5dextend_f) -! -! PURPOSE -! Extends a dataset with unlimited dimension. -! -! INPUTS -! dataset_id - dataset identifier -! size - array containing the new magnitude of -! each dimension -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! Changed name from the now obsolete h5dextend_f -! to h5dset_extent_f. Provided interface to old name -! for backward compatability. -MSB- March 14, 2008 -! -! SOURCE - SUBROUTINE h5dset_extent_f(dataset_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: size - ! Array containing - ! dimensions' sizes - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dset_extent_c(dataset_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSET_EXTENT_C'::h5dset_extent_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: size - END FUNCTION h5dset_extent_c - END INTERFACE - - hdferr = H5Dset_extent_c(dataset_id, size) - END SUBROUTINE h5dset_extent_f - -!****s* H5D/h5dget_create_plist_f -! -! NAME -! h5dget_create_plist_f -! -! PURPOSE -! Returns an identifier for a copy of the dataset creation -! property list for a dataset. -! -! INPUTS -! dataset_id - dataset identifier -! OUTPUTS -! plist_id - creation property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! SOURCE - SUBROUTINE h5dget_create_plist_f(dataset_id, plist_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HID_T), INTENT(OUT) :: plist_id ! Dataset creation - ! property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dget_create_plist_c(dataset_id, plist_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_CREATE_PLIST_C'::h5dget_create_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HID_T), INTENT(OUT) :: plist_id - END FUNCTION h5dget_create_plist_c - END INTERFACE - - hdferr = h5dget_create_plist_c(dataset_id, plist_id) - END SUBROUTINE h5dget_create_plist_f - -! -!****s* H5D/h5dget_storage_size_f -! -! NAME -! h5dget_storage_size_f -! -! PURPOSE -! Returns the amount of storage requires by a dataset -! -! INPUTS -! dataset_id - dataset identifier -! OUTPUTS -! size - datastorage size -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 15, 2002 -! SOURCE - SUBROUTINE h5dget_storage_size_f(dataset_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Amount of storage - ! allocated for dataset - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dget_storage_size_c(dataset_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_STORAGE_SIZE_C'::h5dget_storage_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5dget_storage_size_c - END INTERFACE - - hdferr = h5dget_storage_size_c(dataset_id, size) - END SUBROUTINE h5dget_storage_size_f - -! -!****s* H5D/h5dvlen_get_max_len_f -! -! NAME -! h5dvlen_get_max_len_f -! -! PURPOSE -! Returns maximum length of the VL array elements -! -! INPUTS -! dataset_id - dataset identifier -! type_id - datatype identifier -! space_id - dataspace identifier -! OUTPUTS -! size - buffer size -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! October 15, 2002 -! -! SOURCE - SUBROUTINE h5dvlen_get_max_len_f(dataset_id, type_id, space_id, len, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(SIZE_T), INTENT(OUT) :: len ! Maximum length of the element - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dvlen_get_max_len_c(dataset_id, type_id, space_id, len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DVLEN_GET_MAX_LEN_C'::h5dvlen_get_max_len_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(SIZE_T), INTENT(OUT) :: len - END FUNCTION h5dvlen_get_max_len_c - END INTERFACE - - hdferr = h5dvlen_get_max_len_c(dataset_id, type_id, space_id, len) - END SUBROUTINE h5dvlen_get_max_len_f - -! -!****s* H5D/h5dget_space_status_f -! -! NAME -! h5dget_space_status_f -! -! PURPOSE -! Returns the status of data space allocation. -! -! INPUTS -! dset_id - dataset identifier -! OUTPUTS -! flag - status; may have one of the following values: -! H5D_SPACE_STS_ERROR_F -! H5D_SPACE_STS_NOT_ALLOCATED_F -! H5D_SPACE_STS_PART_ALLOCATED_F -! H5D_SPACE_STS_ALLOCATED_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! SOURCE - SUBROUTINE h5dget_space_status_f(dset_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: flag ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - !***** - INTERFACE - INTEGER FUNCTION h5dget_space_status_c(dset_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_SPACE_STATUS_C'::h5dget_space_status_c - !DEC$ENDIF - INTEGER(HID_T) :: dset_id - INTEGER :: flag - END FUNCTION h5dget_space_status_c - END INTERFACE - - hdferr = h5dget_space_status_c(dset_id, flag) - END SUBROUTINE h5dget_space_status_f - -! -!****s* H5D/h5dcreate_anon_f -! -! NAME -! h5dcreate_anon_f -! -! PURPOSE -! Creates a dataset in a file without linking it into the file structure -! -! INPUTS -! loc_id - Identifier of the file or group within which to create the dataset. -! type_id - Identifier of the datatype to use when creating the dataset. -! space_id - Identifier of the dataspace to use when creating the dataset. -! OUTPUTS -! dset_id - dataset identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! dcpl_id - Dataset creation property list identifier. -! dapl_id - Dataset access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! February 11, 2008 -! -! SOURCE - SUBROUTINE h5dcreate_anon_f(loc_id, type_id, space_id, dset_id, hdferr, dcpl_id, dapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier. - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier. - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier. - INTEGER(HID_T), INTENT(OUT) :: dset_id ! Dataset identifier. - INTEGER, INTENT(OUT) :: hdferr ! Error code. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dcpl_id ! Dataset creation property list identifier. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: dapl_id ! Dataset access property list identifier. -!***** - INTEGER(HID_T) :: dcpl_id_default - INTEGER(HID_T) :: dapl_id_default - - ! - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dcreate_anon_c(loc_id, type_id, space_id, dcpl_id_default, dapl_id_default, dset_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DCREATE_ANON_C'::h5dcreate_anon_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T) :: dcpl_id_default - INTEGER(HID_T) :: dapl_id_default - INTEGER(HID_T), INTENT(OUT) :: dset_id - END FUNCTION h5dcreate_anon_c - END INTERFACE - - dcpl_id_default = H5P_DEFAULT_F - dapl_id_default = H5P_DEFAULT_F - - IF(PRESENT(dcpl_id)) dcpl_id_default = dcpl_id - IF(PRESENT(dapl_id)) dapl_id_default = dapl_id - - hdferr = h5dcreate_anon_c(loc_id, type_id, space_id, dcpl_id_default, dapl_id_default, dset_id) - - END SUBROUTINE h5dcreate_anon_f - - SUBROUTINE h5dwrite_vl_integer(dset_id, mem_type_id, buf, dims, len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len ! Array to store - ! the length of each - ! element - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2)), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_vl_integer_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims, len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_VL_INTEGER_C'::h5dwrite_vl_integer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwrite_vl_integer_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_vl_integer_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, len) - - END SUBROUTINE h5dwrite_vl_integer - - SUBROUTINE h5dread_vl_integer(dset_id, mem_type_id, buf, dims, len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem - INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len ! Array to store - ! the length of each - ! element - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! -1 if failed, 0 otherwise - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: tmp - INTEGER :: error - - INTERFACE - INTEGER FUNCTION h5dread_vl_integer_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims, len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_VL_INTEGER_C'::h5dread_vl_integer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dread_vl_integer_c - END INTERFACE - - CALL h5dget_space_f(dset_id, tmp, error) - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = tmp - file_space_id_default = tmp - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_vl_integer_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, len) - - END SUBROUTINE h5dread_vl_integer - - SUBROUTINE h5dwrite_vl_real(dset_id, mem_type_id, buf, dims, len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len ! Array to store - ! the length of each - ! element - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_vl_real_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims, len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_VL_REAL_C'::h5dwrite_vl_real_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: len - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwrite_vl_real_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_vl_real_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, len) - - END SUBROUTINE h5dwrite_vl_real - - SUBROUTINE h5dread_vl_real(dset_id, mem_type_id, buf, dims, len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! MAX len x num_elem - INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len ! Array to store the length of each element - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! -1 if failed, 0 otherwise - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: tmp - INTEGER :: error - - INTERFACE - INTEGER FUNCTION h5dread_vl_real_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims, len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_VL_REAL_C'::h5dread_vl_real_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER(SIZE_T), INTENT(INOUT), DIMENSION(*) :: len - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dread_vl_real_c - END INTERFACE - - CALL h5dget_space_f(dset_id, tmp, error) - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = tmp - file_space_id_default = tmp - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_vl_real_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, len) - - END SUBROUTINE h5dread_vl_real - - SUBROUTINE h5dwrite_vl_string(dset_id, mem_type_id, buf, dims, str_len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! Number of strings - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: str_len ! Array to store the length of each element - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(2)) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_vl_string_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - ! xfer_prp_default, tmp_buf, dims, str_len) - xfer_prp_default, buf, dims, str_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_VL_STRING_C'::h5dwrite_vl_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims - INTEGER(SIZE_T), INTENT(IN), DIMENSION(*) :: str_len - CHARACTER(LEN=*), DIMENSION(dims(2)) :: buf - END FUNCTION - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_vl_string_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, str_len) - - END SUBROUTINE h5dwrite_vl_string - - SUBROUTINE h5dread_vl_string(dset_id, mem_type_id, buf, dims, str_len, & - hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims ! number of strings - INTEGER(SIZE_T), INTENT(OUT), DIMENSION(*) :: str_len ! Array to store - ! the length of each - ! element - CHARACTER(LEN=*), INTENT(OUT), & - DIMENSION(dims(2)) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_vl_string_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims, str_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_VL_STRING_C'::h5dread_vl_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(2) :: dims - INTEGER(SIZE_T), INTENT(OUT), DIMENSION(*) :: str_len - CHARACTER(LEN=*), DIMENSION(dims(2)) :: buf - END FUNCTION h5dread_vl_string_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_vl_string_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims, str_len) - RETURN - END SUBROUTINE h5dread_vl_string - -! -!****s* H5D/h5dget_space_f -! -! NAME -! h5dget_space_f -! -! PURPOSE -! Returns an identifier for a copy of the dataspace for a -! dataset. -! -! INPUTS -! dataset_id - dataset identifier -! OUTPUTS -! dataspace_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5dget_space_f(dataset_id, dataspace_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dataset_id ! Dataset identifier - INTEGER(HID_T), INTENT(OUT) :: dataspace_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5dget_space_c(dataset_id, dataspace_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_SPACE_C'::h5dget_space_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dataset_id - INTEGER(HID_T), INTENT(OUT) :: dataspace_id - END FUNCTION h5dget_space_c - END INTERFACE - - hdferr = h5dget_space_c(dataset_id, dataspace_id) -END SUBROUTINE h5dget_space_f - -!****s* H5D/h5dget_access_plist_f -! -! NAME -! h5dget_access_plist_f -! -! PURPOSE -! Returns a copy of the dataset creation property list. -! -! INPUTS -! dset_id - Dataset identifier -! -! OUTPUTS -! plist_id - Dataset access property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! April 13, 2009 -! -! SOURCE -SUBROUTINE h5dget_access_plist_f(dset_id, plist_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(OUT) :: plist_id - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5dget_access_plist_c(dset_id, plist_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DGET_ACCESS_PLIST_C'::h5dget_access_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(OUT) :: plist_id - END FUNCTION h5dget_access_plist_c - END INTERFACE - - hdferr = h5dget_access_plist_c(dset_id, plist_id) - -END SUBROUTINE h5dget_access_plist_f - -END MODULE H5D - - diff --git a/fortran/src/H5Dff_F03.f90 b/fortran/src/H5Dff_F03.f90 deleted file mode 100644 index 7026ae3..0000000 --- a/fortran/src/H5Dff_F03.f90 +++ /dev/null @@ -1,2389 +0,0 @@ -!****h* ROBODoc/H5D (F03) -! -! NAME -! H5D_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5D functions. -! It contains the same functions as H5Dff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Dff_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! (1) The maximum rank of an array allowed in Fortran is 7, therefore -! we only provide an interface for arrays up to and including rank 7. -! -! (2) Unfortunately we are using a generic interface and one of the factors -! used in determining the proper routine to select is that of the array -! rank being passed. Therefore, we can not create just one subroutine for -! each array type (integer, real, etc...) and use a -! rank 1 array of assumed size to handle multiple ranks, i.e. -! (i.e. integer, dimension(*) :: ... ) -! (i.e. real , dimension(*) :: ... ) etc... -! -! (3) Could not place the USE, INTRINSIC :: ISO_C_BINDING in the module header because it may -! conflict with the USE, INTRINSIC :: ISO_C_BINDING included in the user's program. Moved -! the statement instead to each subroutine. -! -! -! (4) C_LOC and character strings according to the Fortran 2003 standard: -! -! 15.1.2.5 C_LOC(X) -! -! Argument. X shall either -! -! (A) have interoperable type and type parameters and be -! (a) a variable that has the TARGET attribute and is interoperable, -! (b) an allocated allocatable variable that has the TARGET attribute -! and is not an array of zero size, or -! (c) an associated scalar pointer, or -! (B) be a nonpolymorphic scalar, have no length type parameters, and be -! (a) a nonallocatable, nonpointer variable that has the TARGET attribute, -! (b) an allocated allocatable variable that has the TARGET attribute, or -! (c) an associated pointer. -! -! - When X is a character, for interoperability the standard is: -! -! 15.2.1 Interoperability of intrinsic types -! -! ...if the type is character, interoperability also requires that the length type parameter -! be omitted or be specified by an initialization expression whose value is one. -! -! THEREFORE compilers that have not extended the standard require the -! argument in C_LOC to be of the variant: -! -! CHARACTER(LEN=1), TARGET :: chr -! or -! CHARACTER, TARGET :: chr -! -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5D_PROVISIONAL - USE H5GLOBAL - - INTERFACE h5dwrite_f - - MODULE PROCEDURE h5dwrite_reference_obj - MODULE PROCEDURE h5dwrite_reference_dsetreg - MODULE PROCEDURE h5dwrite_integer_scalar - MODULE PROCEDURE h5dwrite_integer_1 - MODULE PROCEDURE h5dwrite_integer_2 - MODULE PROCEDURE h5dwrite_integer_3 - MODULE PROCEDURE h5dwrite_integer_4 - MODULE PROCEDURE h5dwrite_integer_5 - MODULE PROCEDURE h5dwrite_integer_6 - MODULE PROCEDURE h5dwrite_integer_7 - MODULE PROCEDURE h5dwrite_char_scalar - MODULE PROCEDURE h5dwrite_char_1 - MODULE PROCEDURE h5dwrite_char_2 - MODULE PROCEDURE h5dwrite_char_3 - MODULE PROCEDURE h5dwrite_char_4 - MODULE PROCEDURE h5dwrite_char_5 - MODULE PROCEDURE h5dwrite_char_6 - MODULE PROCEDURE h5dwrite_char_7 - MODULE PROCEDURE h5dwrite_real_scalar - MODULE PROCEDURE h5dwrite_real_1 - MODULE PROCEDURE h5dwrite_real_2 - MODULE PROCEDURE h5dwrite_real_3 - MODULE PROCEDURE h5dwrite_real_4 - MODULE PROCEDURE h5dwrite_real_5 - MODULE PROCEDURE h5dwrite_real_6 - MODULE PROCEDURE h5dwrite_real_7 - - ! This is the preferred way to call h5dwrite - ! by passing an address - MODULE PROCEDURE h5dwrite_ptr - - END INTERFACE - - INTERFACE h5dread_f - - MODULE PROCEDURE h5dread_reference_obj - MODULE PROCEDURE h5dread_reference_dsetreg - MODULE PROCEDURE h5dread_integer_scalar - MODULE PROCEDURE h5dread_integer_1 - MODULE PROCEDURE h5dread_integer_2 - MODULE PROCEDURE h5dread_integer_3 - MODULE PROCEDURE h5dread_integer_4 - MODULE PROCEDURE h5dread_integer_5 - MODULE PROCEDURE h5dread_integer_6 - MODULE PROCEDURE h5dread_integer_7 - MODULE PROCEDURE h5dread_char_scalar - MODULE PROCEDURE h5dread_char_1 - MODULE PROCEDURE h5dread_char_2 - MODULE PROCEDURE h5dread_char_3 - MODULE PROCEDURE h5dread_char_4 - MODULE PROCEDURE h5dread_char_5 - MODULE PROCEDURE h5dread_char_6 - MODULE PROCEDURE h5dread_char_7 - MODULE PROCEDURE h5dread_real_scalar - MODULE PROCEDURE h5dread_real_1 - MODULE PROCEDURE h5dread_real_2 - MODULE PROCEDURE h5dread_real_3 - MODULE PROCEDURE h5dread_real_4 - MODULE PROCEDURE h5dread_real_5 - MODULE PROCEDURE h5dread_real_6 - MODULE PROCEDURE h5dread_real_7 - - ! This is the preferred way to call h5dread - ! by passing an address - MODULE PROCEDURE h5dread_ptr - - END INTERFACE - -! Interface for the function used to pass the C pointer of the buffer -! to the C H5Dwrite routine - - INTERFACE - INTEGER FUNCTION h5dwrite_f_c(dset_id, mem_type_id, & - mem_space_id_default , & - file_space_id_default, & - xfer_prp_default, buf ) BIND(C, NAME='h5dwrite_f_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - TYPE(C_PTR), VALUE :: buf - END FUNCTION h5dwrite_f_c - END INTERFACE - -! Interface for the function used to pass the C pointer of the buffer -! to the C H5Dread routine - - INTERFACE - INTEGER FUNCTION h5dread_f_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf) BIND(C, NAME='h5dread_f_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - TYPE(C_PTR), VALUE :: buf - END FUNCTION h5dread_f_c - END INTERFACE - - INTERFACE h5dfill_f - MODULE PROCEDURE h5dfill_integer - MODULE PROCEDURE h5dfill_real - MODULE PROCEDURE h5dfill_char - END INTERFACE - -! Interface for the function used to pass the C pointer of the buffer -! to the C H5Dfill routine - - INTERFACE - INTEGER FUNCTION h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & - f_ptr_buf, mem_type_id) BIND(C, NAME='h5dfill_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - TYPE(C_PTR), VALUE :: f_ptr_fill_value - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - TYPE(C_PTR), VALUE :: f_ptr_buf - INTEGER(HID_T) :: mem_type_id - END FUNCTION h5dfill_c - END INTERFACE - -CONTAINS - - SUBROUTINE h5dwrite_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf - TYPE(hobj_ref_t_f), DIMENSION(dims(1)), INTENT(IN), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - - END SUBROUTINE h5dwrite_reference_obj - - SUBROUTINE h5dwrite_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf - TYPE(hdset_reg_ref_t_f), DIMENSION(dims(1)), INTENT(IN), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER :: i - INTEGER(HSIZE_T) :: j - TYPE(C_PTR) :: f_ptr - INTERFACE - INTEGER FUNCTION h5dwrite_ref_reg_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REF_REG_C'::h5dwrite_ref_reg_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER, DIMENSION(*) :: ref_buf - INTEGER(HSIZE_T), DIMENSION(*) :: dims - END FUNCTION h5dwrite_ref_reg_c - END INTERFACE - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) - IF (hdferr .NE. 0 ) THEN - hdferr = -1 - RETURN - ELSE - DO j = 1, dims(1) - DO i = 1, REF_REG_BUF_LEN - ref_buf(REF_REG_BUF_LEN*(j-1) + i) = buf(j)%ref(i) - ENDDO - ENDDO - ENDIF - hdferr = h5dwrite_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - DEALLOCATE(ref_buf) - - END SUBROUTINE h5dwrite_reference_dsetreg - - - SUBROUTINE h5dwrite_integer_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER, INTENT(IN), TARGET :: buf ! Data buffer - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_scalar - - SUBROUTINE h5dwrite_integer_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_1 - - SUBROUTINE h5dwrite_integer_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2)),TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_2 - - SUBROUTINE h5dwrite_integer_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_3 - - SUBROUTINE h5dwrite_integer_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_4 - - SUBROUTINE h5dwrite_integer_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_5 - - SUBROUTINE h5dwrite_integer_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_6 - - SUBROUTINE h5dwrite_integer_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_integer_7 - - SUBROUTINE h5dwrite_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(*), INTENT(IN), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - CALL h5dwrite_char_scalar_fix(dset_id, mem_type_id, buf, LEN(buf), dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - - END SUBROUTINE h5dwrite_char_scalar - - SUBROUTINE h5dwrite_char_scalar_fix(dset_id, mem_type_id, buf, buf_len, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN) :: buf_len - CHARACTER(LEN=buf_len), INTENT(IN), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_scalar_fix - - SUBROUTINE h5dwrite_char_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_1 - - SUBROUTINE h5dwrite_char_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_2 - - SUBROUTINE h5dwrite_char_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_3 - - SUBROUTINE h5dwrite_char_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_4 - - SUBROUTINE h5dwrite_char_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1)(1:1)) - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_5 - - SUBROUTINE h5dwrite_char_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1,1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_6 - - SUBROUTINE h5dwrite_char_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)(1:1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_char_7 - - - SUBROUTINE h5dwrite_real_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_scalar - - - SUBROUTINE h5dwrite_real_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_1 - - SUBROUTINE h5dwrite_real_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_2 - - SUBROUTINE h5dwrite_real_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_3 - - SUBROUTINE h5dwrite_real_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_4 - - SUBROUTINE h5dwrite_real_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_5 - - SUBROUTINE h5dwrite_real_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_6 - - SUBROUTINE h5dwrite_real_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dwrite_real_7 - -! -! NAME -! h5dread_f -! -! PURPOSE -! Reads raw data from the specified dataset into buf, -! converting from file datatype and dataspace to memory -! datatype and dataspace. -! -! Inputs: -! dset_id - dataset identifier -! mem_type_id - memory type identifier -! dims - 1-dim array of size 7; dims(k) has the size -! - of k-th dimension of the buf array -! Outputs: -! buf - buffer to read data in -! hdferr: - error code -! Success: 0 -! Failure: -1 -! Optional parameters: -! mem_space_id - memory dataspace identifier -! file_space_id - file dataspace identifier -! xfer_prp - trasfer property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! dims parameter was added to make code portable; -! n parameter was replaced with dims parameter in -! the h5dwrite_reference_obj and h5dwrite_reference_dsetreg -! functions. April 2, 2001 -! -! NOTES -! This function is overloaded to read INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions, and one dimensional buffers -! of the TYPE(hobj_ref_t_f) and TYPE(hdset_reg_ref_t_f) -! types. -! - SUBROUTINE h5dread_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - TYPE(hobj_ref_t_f), INTENT(INOUT) , & - DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_reference_obj - - SUBROUTINE h5dread_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - TYPE(hdset_reg_ref_t_f), INTENT(INOUT), & - DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER :: i - INTEGER(HSIZE_T) :: j - INTERFACE - INTEGER FUNCTION h5dread_ref_reg_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REF_REG_C'::h5dread_ref_reg_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, DIMENSION(*) :: ref_buf - END FUNCTION h5dread_ref_reg_c - END INTERFACE - - ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - - DO j = 1, dims(1) - DO i = 1, REF_REG_BUF_LEN - buf(j)%ref(i) = ref_buf(REF_REG_BUF_LEN*(j-1) + i) - ENDDO - ENDDO - DEALLOCATE(ref_buf) - - END SUBROUTINE h5dread_reference_dsetreg - - - SUBROUTINE h5dread_integer_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT) , TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - - END SUBROUTINE h5dread_integer_scalar - - SUBROUTINE h5dread_integer_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_1 - - SUBROUTINE h5dread_integer_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_2 - - SUBROUTINE h5dread_integer_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_3 - - SUBROUTINE h5dread_integer_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_4 - - SUBROUTINE h5dread_integer_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_5 - - SUBROUTINE h5dread_integer_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_6 - - SUBROUTINE h5dread_integer_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_integer_7 - - SUBROUTINE h5dread_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - CALL h5dread_char_scalar_fix(dset_id, mem_type_id, buf, LEN(buf), hdferr, & - mem_space_id_default, file_space_id_default, xfer_prp_default) - - END SUBROUTINE h5dread_char_scalar - - SUBROUTINE h5dread_char_scalar_fix(dset_id, mem_type_id, buf, buf_len, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER, INTENT(IN) :: buf_len - CHARACTER(LEN=buf_len), INTENT(INOUT), TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(buf(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id, & - file_space_id, xfer_prp, f_ptr) - - END SUBROUTINE h5dread_char_scalar_fix - - SUBROUTINE h5dread_char_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1)(1:1)) - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_1 - - SUBROUTINE h5dread_char_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1)(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_2 - - SUBROUTINE h5dread_char_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1)(1:1)) - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_3 - - SUBROUTINE h5dread_char_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1)(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_4 - - SUBROUTINE h5dread_char_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1)(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_5 - - SUBROUTINE h5dread_char_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1,1)(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_6 - - SUBROUTINE h5dread_char_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)(1:1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_char_7 - - SUBROUTINE h5dread_real_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT) , TARGET :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_scalar - - SUBROUTINE h5dread_real_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_1 - - SUBROUTINE h5dread_real_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_2 - - SUBROUTINE h5dread_real_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_3 - - SUBROUTINE h5dread_real_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3), dims(4)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_4 - - SUBROUTINE h5dread_real_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_5 - - SUBROUTINE h5dread_real_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_6 - - SUBROUTINE h5dread_real_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) , TARGET :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - TYPE(C_PTR) :: f_ptr - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF(PRESENT(file_space_id)) file_space_id_default = file_space_id - f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, f_ptr) - - END SUBROUTINE h5dread_real_7 - -!****s* H5D (F03)/h5dwrite_f_F03 -! -! NAME -! h5dwrite_f_F03 -! -! PURPOSE -! Writes raw data from a dataset into a buffer. -! -! Inputs: -! dset_id - Identifier of the dataset to write to. -! mem_type_id - Identifier of the memory datatype. -! buf - Buffer with data to be written to the file. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! Optional parameters: -! mem_space_id - Identifier of the memory dataspace. -! file_space_id - Identifier of the dataset's dataspace in the file. -! xfer_prp - Identifier of a transfer property list for this I/O operation. -! -! AUTHOR -! M. Scot Breitenfeld -! September 17, 2011 -! -! Fortran2003 Interface: -!! SUBROUTINE h5dwrite_f(dset_id, mem_type_id, buf, hdferr, & -!! mem_space_id, file_space_id, xfer_prp) -!! INTEGER(HID_T), INTENT(IN) :: dset_id -!! INTEGER(HID_T), INTENT(IN) :: mem_type_id -!! TYPE(C_PTR) , INTENT(IN) :: buf -!! INTEGER , INTENT(OUT) :: hdferr -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: mem_space_id -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: file_space_id -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: xfer_prp -!***** - SUBROUTINE h5dwrite_ptr(dset_id, mem_type_id, buf, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - TYPE(C_PTR), INTENT(IN) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf) - - END SUBROUTINE h5dwrite_ptr -!****s* H5D (F03)/h5dread_f_F03 -! -! NAME -! h5dread_f_F03 -! -! PURPOSE -! Reads raw data from a dataset into a buffer. -! -! Inputs: -! dset_id - Identifier of the dataset read from. -! mem_type_id - Identifier of the memory datatype. -! -! Outputs: -! buf - Buffer to receive data read from file. -! hdferr - Returns 0 if successful and -1 if fails -! -! Optional parameters: -! mem_space_id - Identifier of the memory dataspace. -! file_space_id - Identifier of the dataset's dataspace in the file. -! xfer_prp - Identifier of a transfer property list for this I/O operation. -! -! AUTHOR -! M. Scot Breitenfeld -! September 17, 2011 -! -! Fortran2003 Interface: -!! SUBROUTINE h5dread_f(dset_id, mem_type_id, buf, hdferr, & -!! mem_space_id, file_space_id, xfer_prp) -!! INTEGER(HID_T), INTENT(IN) :: dset_id -!! INTEGER(HID_T), INTENT(IN) :: mem_type_id -!! TYPE(C_PTR) , INTENT(INOUT) :: buf -!! INTEGER , INTENT(OUT) :: hdferr -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: mem_space_id -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: file_space_id -!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: xfer_prp -!***** - SUBROUTINE h5dread_ptr(dset_id, mem_type_id, buf, hdferr, & - mem_space_id, file_space_id, xfer_prp) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - TYPE(C_PTR), INTENT(INOUT) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf) - - END SUBROUTINE h5dread_ptr - -! -! NAME -! h5dfill_integer -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! Inputs: -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! Outputs: -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! - - SUBROUTINE h5dfill_integer(fill_value, space_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER, INTENT(IN), TARGET :: fill_value ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - INTEGER, INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - TYPE(C_PTR) :: f_ptr_fill_value ! C pointer to fill_value - TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf - - f_ptr_fill_value = C_LOC(fill_value) - f_ptr_buf = C_LOC(buf(1)) - - fill_type_id = H5T_NATIVE_INTEGER - mem_type_id = H5T_NATIVE_INTEGER - - hdferr = h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & - f_ptr_buf, mem_type_id) - - END SUBROUTINE h5dfill_integer - -! -! NAME -! h5dfill_real -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! Inputs: -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! Outputs: -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! - SUBROUTINE h5dfill_real(fill_valuer, space_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - REAL, INTENT(IN), TARGET :: fill_valuer ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - REAL, INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - TYPE(C_PTR) :: f_ptr_fill_valuer ! C pointer to fill_value - TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf - - f_ptr_fill_valuer = C_LOC(fill_valuer) - f_ptr_buf = C_LOC(buf(1)) - - fill_type_id = H5T_NATIVE_REAL - mem_type_id = H5T_NATIVE_REAL - - hdferr = h5dfill_c(f_ptr_fill_valuer, fill_type_id, space_id, & - f_ptr_buf, mem_type_id) - - END SUBROUTINE h5dfill_real - -! -! NAME -! h5dfill_char -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! Inputs: -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! Outputs: -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! - SUBROUTINE h5dfill_char(fill_value, space_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - CHARACTER, INTENT(IN), TARGET :: fill_value ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - CHARACTER, INTENT(IN), DIMENSION(*), TARGET :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - TYPE(C_PTR) :: f_ptr_fill_value ! C pointer to fill_value - TYPE(C_PTR) :: f_ptr_buf ! C pointer to buf - - f_ptr_fill_value = C_LOC(fill_value) - f_ptr_buf = C_LOC(buf(1)) - - hdferr = h5dfill_c(f_ptr_fill_value, fill_type_id, space_id, & - f_ptr_buf, mem_type_id) - - END SUBROUTINE h5dfill_char -! -!****s* H5D (F03)/h5dvlen_reclaim_f -! NAME -! h5dvlen_reclaim_f -! -! PURPOSE -! Reclaims VL datatype memory buffers. -! -! Inputs: -! -! type_id - Identifier of the datatype. -! space_id - Identifier of the dataspace. -! plist_id - Identifier of the property list used to create the buffer. -! buf - Pointer to the buffer to be reclaimed. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! January 11, 2011 -! -! Fortran2003 Interface: - SUBROUTINE h5dvlen_reclaim_f(type_id, space_id, plist_id, buf, hdferr) - USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T), INTENT(IN) :: plist_id - TYPE(C_PTR) , INTENT(INOUT) :: buf - INTEGER , INTENT(OUT) :: hdferr -!***** - - INTERFACE - INTEGER FUNCTION h5dvlen_reclaim_c(type_id, space_id, plist_id, buf) BIND(C, NAME='h5dvlen_reclaim_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR - INTEGER(HID_T) :: type_id - INTEGER(HID_T) :: space_id - INTEGER(HID_T) :: plist_id - TYPE(C_PTR), VALUE :: buf - END FUNCTION h5dvlen_reclaim_c - END INTERFACE - - hdferr = H5Dvlen_reclaim_c(type_id, space_id, plist_id, buf) - - END SUBROUTINE H5Dvlen_reclaim_f - -END MODULE H5D_PROVISIONAL - - diff --git a/fortran/src/H5Dff_F90.f90 b/fortran/src/H5Dff_F90.f90 deleted file mode 100644 index 66cfe62..0000000 --- a/fortran/src/H5Dff_F90.f90 +++ /dev/null @@ -1,3004 +0,0 @@ -!****h* ROBODoc/H5D (F90) -! -! NAME -! -! H5D_PROVISIONAL -! -! PURPOSE -! -! This file contains Fortran 90 interfaces for H5D functions. It contains -! the same functions as H5Dff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Dff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! (1) The maximum rank of an array allowed in Fortran is 7, therefore -! we only provide an interface for arrays up to and including rank 7. -! -! (2) Unfortunately we are using a generic interface and one of the factors -! used in determining the proper routine to select is that of the array -! rank being passed, therefore we can not create just one subroutine for -! each array type (integer, real, etc...) of various ranks and then use a -! rank 1 array of assumed size in the just one subroutine, -! (i.e. integer, dimension(*) :: ... ) -! (i.e. real , dimension(*) :: ... ) etc... -! -! (3) -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5D_PROVISIONAL - USE H5GLOBAL - - INTERFACE h5dwrite_f - - MODULE PROCEDURE h5dwrite_reference_obj - MODULE PROCEDURE h5dwrite_reference_dsetreg - MODULE PROCEDURE h5dwrite_integer_scalar - MODULE PROCEDURE h5dwrite_integer_1 - MODULE PROCEDURE h5dwrite_integer_2 - MODULE PROCEDURE h5dwrite_integer_3 - MODULE PROCEDURE h5dwrite_integer_4 - MODULE PROCEDURE h5dwrite_integer_5 - MODULE PROCEDURE h5dwrite_integer_6 - MODULE PROCEDURE h5dwrite_integer_7 - MODULE PROCEDURE h5dwrite_char_scalar - MODULE PROCEDURE h5dwrite_char_1 - MODULE PROCEDURE h5dwrite_char_2 - MODULE PROCEDURE h5dwrite_char_3 - MODULE PROCEDURE h5dwrite_char_4 - MODULE PROCEDURE h5dwrite_char_5 - MODULE PROCEDURE h5dwrite_char_6 - MODULE PROCEDURE h5dwrite_char_7 - MODULE PROCEDURE h5dwrite_real_scalar - MODULE PROCEDURE h5dwrite_real_1 - MODULE PROCEDURE h5dwrite_real_2 - MODULE PROCEDURE h5dwrite_real_3 - MODULE PROCEDURE h5dwrite_real_4 - MODULE PROCEDURE h5dwrite_real_5 - MODULE PROCEDURE h5dwrite_real_6 - MODULE PROCEDURE h5dwrite_real_7 - - END INTERFACE - - INTERFACE h5dread_f - - MODULE PROCEDURE h5dread_reference_obj - MODULE PROCEDURE h5dread_reference_dsetreg - MODULE PROCEDURE h5dread_integer_scalar - MODULE PROCEDURE h5dread_integer_1 - MODULE PROCEDURE h5dread_integer_2 - MODULE PROCEDURE h5dread_integer_3 - MODULE PROCEDURE h5dread_integer_4 - MODULE PROCEDURE h5dread_integer_5 - MODULE PROCEDURE h5dread_integer_6 - MODULE PROCEDURE h5dread_integer_7 - MODULE PROCEDURE h5dread_char_scalar - MODULE PROCEDURE h5dread_char_1 - MODULE PROCEDURE h5dread_char_2 - MODULE PROCEDURE h5dread_char_3 - MODULE PROCEDURE h5dread_char_4 - MODULE PROCEDURE h5dread_char_5 - MODULE PROCEDURE h5dread_char_6 - MODULE PROCEDURE h5dread_char_7 - MODULE PROCEDURE h5dread_real_scalar - MODULE PROCEDURE h5dread_real_1 - MODULE PROCEDURE h5dread_real_2 - MODULE PROCEDURE h5dread_real_3 - MODULE PROCEDURE h5dread_real_4 - MODULE PROCEDURE h5dread_real_5 - MODULE PROCEDURE h5dread_real_6 - MODULE PROCEDURE h5dread_real_7 - END INTERFACE - - INTERFACE h5dfill_f - MODULE PROCEDURE h5dfill_integer - MODULE PROCEDURE h5dfill_real - MODULE PROCEDURE h5dfill_char - END INTERFACE - -CONTAINS - -!****s* H5D/h5dread_f -! -! NAME -! h5dread_f -! -! PURPOSE -! Reads raw data from the specified dataset into buf, -! converting from file datatype and dataspace to memory -! datatype and dataspace. -! -! INPUTS -! dset_id - dataset identifier -! mem_type_id - memory type identifier -! dims - 1-dim array of size 7; dims(k) has the size -! of k-th dimension of the buf array -! OUTPUTS -! buf - buffer to read data in -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! OPTIONAL PARAMETERS -! mem_space_id - memory dataspace identifier -! file_space_id - file dataspace identifier -! xfer_prp - trasfer property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! dims parameter was added to make code portable; -! n parameter was replaced with dims parameter in -! the h5dwrite_reference_obj and h5dwrite_reference_dsetreg -! functions. April 2, 2001 -! -! NOTES -! This function is overloaded to read INTEGER, -! REAL, DOUBLE PRECISION and CHARACTER buffers -! up to 7 dimensions, and one dimensional buffers -! of the TYPE(hobj_ref_t_f) and TYPE(hdset_reg_ref_t_f) types. -!***** - SUBROUTINE h5dread_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - TYPE(hobj_ref_t_f), INTENT(INOUT) , & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HADDR_T), ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER(HSIZE_T) :: j - - INTERFACE - INTEGER FUNCTION h5dread_ref_obj_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REF_OBJ_C'::h5dread_ref_obj_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER(HADDR_T), DIMENSION(*) :: ref_buf - END FUNCTION h5dread_ref_obj_c - END INTERFACE - - ALLOCATE(ref_buf(dims(1)), stat=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_ref_obj_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - DO j = 1, dims(1) - buf(j)%ref = ref_buf(j) - ENDDO - DEALLOCATE(ref_buf) - END SUBROUTINE h5dread_reference_obj - - SUBROUTINE h5dread_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - TYPE(hdset_reg_ref_t_f), INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER :: i - INTEGER(HSIZE_T) :: j - - INTERFACE - INTEGER FUNCTION h5dread_ref_reg_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REF_REG_C'::h5dread_ref_reg_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, DIMENSION(*) :: ref_buf - END FUNCTION h5dread_ref_reg_c - END INTERFACE - - ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - - DO j = 1, dims(1) - DO i = 1, REF_REG_BUF_LEN - buf(j)%ref(i) = ref_buf(REF_REG_BUF_LEN*(j-1) + i) - ENDDO - ENDDO - DEALLOCATE(ref_buf) - END SUBROUTINE h5dread_reference_dsetreg - - SUBROUTINE h5dread_integer_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_integer_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_S_C'::h5dread_integer_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT) :: buf - END FUNCTION h5dread_integer_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_integer_scalar - - SUBROUTINE h5dread_integer_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_integer_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_1_C'::h5dread_integer_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT), DIMENSION(dims(1)) :: buf - END FUNCTION h5dread_integer_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_integer_1 - - SUBROUTINE h5dread_integer_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_integer_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_2_C'::h5dread_integer_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT), DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dread_integer_2_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_2 - - SUBROUTINE h5dread_integer_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_integer_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_3_C'::h5dread_integer_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT), DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dread_integer_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_3 - - SUBROUTINE h5dread_integer_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_integer_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_4_C'::h5dread_integer_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT), DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dread_integer_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_4 - - SUBROUTINE h5dread_integer_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_integer_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_5_C'::h5dread_integer_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dread_integer_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_5 - - SUBROUTINE h5dread_integer_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - - INTERFACE - INTEGER FUNCTION h5dread_integer_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_6_C'::h5dread_integer_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dread_integer_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_6 - - SUBROUTINE h5dread_integer_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_integer_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_INTEGER_7_C'::h5dread_integer_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dread_integer_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_integer_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dread_integer_7 - - SUBROUTINE h5dread_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_S_C'::h5dreadc_s_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(OUT) :: buf - END FUNCTION h5dreadc_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_scalar - - SUBROUTINE h5dread_char_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_1_C'::h5dreadc_1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dreadc_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_1 - - SUBROUTINE h5dread_char_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - - INTERFACE - INTEGER FUNCTION h5dreadc_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_2_C'::h5dreadc_2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dreadc_2_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_2 - - SUBROUTINE h5dread_char_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_3_C'::h5dreadc_3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dreadc_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_3 - - SUBROUTINE h5dread_char_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_4_C'::h5dreadc_4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dreadc_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_4 - - SUBROUTINE h5dread_char_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_5_C'::h5dreadc_5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dreadc_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_5 - - SUBROUTINE h5dread_char_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_6_C'::h5dreadc_6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dreadc_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_6 - - SUBROUTINE h5dread_char_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dreadc_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREADC_7_C'::h5dreadc_7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dreadc_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dreadc_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_char_7 - - SUBROUTINE h5dread_real_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_S_C'::h5dread_real_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(OUT) :: buf - END FUNCTION h5dread_real_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_scalar - - SUBROUTINE h5dread_real_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_real_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_real_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_1_C'::h5dread_real_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dread_real_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_1 - - SUBROUTINE h5dread_real_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_2_C'::h5dread_real_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dread_real_2_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_2 - - SUBROUTINE h5dread_real_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_3_C'::h5dread_real_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dread_real_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_3 - - SUBROUTINE h5dread_real_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3), dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_4_C'::h5dread_real_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3), dims(4)) :: buf - END FUNCTION h5dread_real_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_4 - - SUBROUTINE h5dread_real_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_5_C'::h5dread_real_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dread_real_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_5 - - SUBROUTINE h5dread_real_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_6_C'::h5dread_real_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dread_real_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_6 - - SUBROUTINE h5dread_real_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dread_real_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_REAL_7_C'::h5dread_real_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dread_real_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_real_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_real_7 - - SUBROUTINE h5dwrite_reference_obj(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf - TYPE(hobj_ref_t_f), DIMENSION(dims(1)), INTENT(IN) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HADDR_T), ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER(HSIZE_T) :: j - - INTERFACE - INTEGER FUNCTION h5dwrite_ref_obj_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REF_OBJ_C'::h5dwrite_ref_obj_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HADDR_T), DIMENSION(*) :: ref_buf - INTEGER(HSIZE_T), DIMENSION(*) :: dims - END FUNCTION h5dwrite_ref_obj_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - ALLOCATE(ref_buf(dims(1)), stat=hdferr) - IF (hdferr .NE. 0 ) THEN - hdferr = -1 - RETURN - ELSE - DO j = 1, dims(1) - ref_buf(j) = buf(j)%ref - ENDDO - ENDIF - hdferr = h5dwrite_ref_obj_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims(1)) - DEALLOCATE(ref_buf) - - END SUBROUTINE h5dwrite_reference_obj - - SUBROUTINE h5dwrite_reference_dsetreg(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the bufffer buf - TYPE(hdset_reg_ref_t_f), DIMENSION(dims(1)), INTENT(IN) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER, ALLOCATABLE, DIMENSION(:) :: ref_buf - INTEGER :: i - INTEGER(HSIZE_T) :: j - - INTERFACE - INTEGER FUNCTION h5dwrite_ref_reg_c(dset_id, mem_type_id,& - mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REF_REG_C'::h5dwrite_ref_reg_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER, DIMENSION(*) :: ref_buf - INTEGER(HSIZE_T), DIMENSION(*) :: dims - END FUNCTION h5dwrite_ref_reg_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - ALLOCATE(ref_buf(REF_REG_BUF_LEN*dims(1)), stat=hdferr) - IF (hdferr .NE. 0 ) THEN - hdferr = -1 - RETURN - ELSE - DO j = 1, dims(1) - DO i = 1, REF_REG_BUF_LEN - ref_buf(REF_REG_BUF_LEN*(j-1) + i) = buf(j)%ref(i) - ENDDO - ENDDO - ENDIF - hdferr = h5dwrite_ref_reg_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, ref_buf, dims) - DEALLOCATE(ref_buf) - - END SUBROUTINE h5dwrite_reference_dsetreg - - SUBROUTINE h5dwrite_integer_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER, INTENT(IN) :: buf ! Data buffer - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_S_C'::h5dwrite_integer_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN) :: buf - END FUNCTION h5dwrite_integer_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_integer_scalar - - SUBROUTINE h5dwrite_integer_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_1_C'::h5dwrite_integer_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dwrite_integer_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_integer_1 - - SUBROUTINE h5dwrite_integer_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_2_C'::h5dwrite_integer_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwrite_integer_2_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - hdferr = h5dwrite_integer_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_2 - - SUBROUTINE h5dwrite_integer_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_3_C'::h5dwrite_integer_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dwrite_integer_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_3 - - SUBROUTINE h5dwrite_integer_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_4_C'::h5dwrite_integer_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dwrite_integer_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_4 - - SUBROUTINE h5dwrite_integer_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_5_C'::h5dwrite_integer_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dwrite_integer_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_5 - - SUBROUTINE h5dwrite_integer_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_6_C'::h5dwrite_integer_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dwrite_integer_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_6 - - SUBROUTINE h5dwrite_integer_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_integer_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_INTEGER_7_C'::h5dwrite_integer_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - INTEGER, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dwrite_integer_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_integer_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, & - buf, dims) - - END SUBROUTINE h5dwrite_integer_7 - - - SUBROUTINE h5dwrite_char_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_S_C'::h5dwritec_s_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN) :: buf - END FUNCTION h5dwritec_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_scalar - - SUBROUTINE h5dwrite_char_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_1_C'::h5dwritec_1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dwritec_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_1 - - SUBROUTINE h5dwrite_char_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_2_C'::h5dwritec_2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwritec_2_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_2 - - SUBROUTINE h5dwrite_char_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_3_C'::h5dwritec_3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dwritec_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_3 - - SUBROUTINE h5dwrite_char_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_4_C'::h5dwritec_4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dwritec_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_4 - - SUBROUTINE h5dwrite_char_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_5_C'::h5dwritec_5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dwritec_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_5 - - SUBROUTINE h5dwrite_char_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_6_C'::h5dwritec_6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dwritec_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_6 - - SUBROUTINE h5dwrite_char_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwritec_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITEC_7_C'::h5dwritec_7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - CHARACTER(LEN=*), INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dwritec_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwritec_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_char_7 - - SUBROUTINE h5dwrite_real_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_S_C'::h5dwrite_real_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN) :: buf - END FUNCTION h5dwrite_real_s_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_scalar - - SUBROUTINE h5dwrite_real_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_1_C'::h5dwrite_real_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dwrite_real_1_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_1 - - SUBROUTINE h5dwrite_real_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_2_C'::h5dwrite_real_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwrite_real_2_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_2 - - SUBROUTINE h5dwrite_real_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_3_C'::h5dwrite_real_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dwrite_real_3_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_3 - - SUBROUTINE h5dwrite_real_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_4_C'::h5dwrite_real_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dwrite_real_4_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_4 - - SUBROUTINE h5dwrite_real_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_5_C'::h5dwrite_real_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dwrite_real_5_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_5 - - SUBROUTINE h5dwrite_real_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_6_C'::h5dwrite_real_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dwrite_real_6_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_6 - - SUBROUTINE h5dwrite_real_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp ! Transfer property list identifier - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - INTERFACE - INTEGER FUNCTION h5dwrite_real_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_REAL_7_C'::h5dwrite_real_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - REAL, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dwrite_real_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - IF (PRESENT(xfer_prp)) xfer_prp_default = xfer_prp - IF (PRESENT(mem_space_id)) mem_space_id_default = mem_space_id - IF (PRESENT(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_real_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_real_7 - -! -! NAME -! h5dfill_integer -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! INPUTS -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! - - SUBROUTINE h5dfill_integer(fill_value, space_id, buf, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - INTEGER, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - ! INTEGER, EXTERNAL :: h5dfill_integer_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dfill_integer_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DFILL_INTEGER_C'::h5dfill_integer_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - INTEGER, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - END FUNCTION h5dfill_integer_c - END INTERFACE - fill_type_id = H5T_NATIVE_INTEGER - mem_type_id = H5T_NATIVE_INTEGER - - hdferr = h5dfill_integer_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - - END SUBROUTINE h5dfill_integer - -! -! NAME -! h5dfill_real -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! INPUTS -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! - - SUBROUTINE h5dfill_real(fill_valuer, space_id, buf, hdferr) - IMPLICIT NONE - REAL, INTENT(IN) :: fill_valuer ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - REAL, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - ! INTEGER, EXTERNAL :: h5dfill_real_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dfill_real_c(fill_valuer, fill_type_id, space_id, & - buf, mem_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DFILL_REAL_C'::h5dfill_real_c - !DEC$ENDIF - REAL, INTENT(IN) :: fill_valuer ! Fill value - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - REAL, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - END FUNCTION h5dfill_real_c - END INTERFACE - fill_type_id = H5T_NATIVE_REAL - mem_type_id = H5T_NATIVE_REAL - - hdferr = h5dfill_real_c(fill_valuer, fill_type_id, space_id, & - buf, mem_type_id) - END SUBROUTINE h5dfill_real - -! -! NAME -! h5dfill_char -! -! PURPOSE -! Fills dataspace elements with a fill value in a memory buffer. -! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes -! of the fillvalues and buffers are supported. Buffer and fillvalue -! are assumed to have the same datatype. -! Only one-dimesional buffers are supported. -! -! INPUTS -! fill_value - fill value -! space_id - memory space selection identifier -! buf - data buffer iin memory ro apply selection to -! - of k-th dimension of the buf array -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! - - SUBROUTINE h5dfill_char(fill_value, space_id, buf, hdferr) - IMPLICIT NONE - CHARACTER, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - CHARACTER, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - ! INTEGER, EXTERNAL :: h5dfillc_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dfillc_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DFILLC_C'::h5dfillc_c - !DEC$ENDIF - CHARACTER, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - CHARACTER, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - END FUNCTION h5dfillc_c - END INTERFACE - fill_type_id = H5T_NATIVE_CHARACTER - mem_type_id = H5T_NATIVE_CHARACTER - - hdferr = h5dfillc_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - - END SUBROUTINE h5dfill_char - - -END MODULE H5D_PROVISIONAL diff --git a/fortran/src/H5Ef.c b/fortran/src/H5Ef.c index f5c0c45..4b1d4c9 100644 --- a/fortran/src/H5Ef.c +++ b/fortran/src/H5Ef.c @@ -1,6 +1,6 @@ /****h* H5Ef/H5Ef * PURPOSE - * This file contains C stubs for H5E Fortran APIs + * This file contains C stubs for H5E Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -42,7 +42,7 @@ * SOURCE */ int_f -nh5eclear_c(hid_t_f *estack_id ) +h5eclear_c(hid_t_f *estack_id ) /******/ { int_f ret_value = 0; @@ -78,7 +78,7 @@ done: * SOURCE */ int_f -nh5eprint_c1(_fcd name, int_f* namelen) +h5eprint_c1(_fcd name, int_f* namelen) /******/ { FILE *file = NULL; @@ -124,7 +124,7 @@ done: * SOURCE */ int_f -nh5eprint_c2(void) +h5eprint_c2(void) /******/ { int_f ret_value = 0; @@ -159,7 +159,7 @@ done: * SOURCE */ int_f -nh5eget_major_c(int_f* error_no, _fcd name, size_t_f* namelen) +h5eget_major_c(int_f* error_no, _fcd name, size_t_f* namelen) /******/ { char *c_name = NULL; @@ -207,7 +207,7 @@ done: * SOURCE */ int_f -nh5eget_minor_c(int_f* error_no, _fcd name, size_t_f* namelen) +h5eget_minor_c(int_f* error_no, _fcd name, size_t_f* namelen) /******/ { char *c_name = NULL; @@ -235,62 +235,25 @@ done: return ret_value; } -/****if* H5Ef/h5eset_auto_c - * NAME - * h5eset_auto_c - * PURPOSE - * Call H5Eset_auto to turn automatic error printing on or off. - * INPUTS - * printflag - flag to turn automatic error printing on or off. - * OUTPUTS - * - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Friday, November 17, 2000 - * HISTORY - * Major bug fix: Function never disabled printing. - * SOURCE -*/ -int_f -nh5eset_auto_c(int_f* printflag) -/******/ -{ - herr_t status = -1; - int_f ret_value = 0; - - if(*printflag == 1) - status = H5Eset_auto2(H5E_DEFAULT, (H5E_auto2_t)H5Eprint2, stderr); - else if(*printflag == 0) - status = H5Eset_auto2(H5E_DEFAULT, NULL, NULL); - if(status < 0) - HGOTO_DONE(FAIL) - -done: - return ret_value; -} - - /****if* H5Ef/h5eset_auto2_c * NAME - * h5eset_auto2_c + * h5eset_auto2_c * PURPOSE - * Calls H5Eset_auto2 + * Calls H5Eset_auto2 * INPUTS - * estack_id - Error stack identifier. - * func - Function to be called upon an error condition. - * client_data - Data passed to the error function. + * estack_id - Error stack identifier. + * func - Function to be called upon an error condition. + * client_data - Data passed to the error function. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * July 22, 2009 + * July 22, 2009 * SOURCE */ /* int_f */ -/* nh5eset_auto2_c(hid_t_f *estack_id, H5E_auto2_t *func, void *client_data) */ +/* h5eset_auto2_c(hid_t_f *estack_id, H5E_auto2_t *func, void *client_data) */ /* /\******\/ */ /* { */ /* int ret_val = -1; */ diff --git a/fortran/src/H5Eff.F90 b/fortran/src/H5Eff.F90 new file mode 100644 index 0000000..a2efe61 --- /dev/null +++ b/fortran/src/H5Eff.F90 @@ -0,0 +1,302 @@ +!****h* ROBODoc/H5E +! +! NAME +! MODULE H5E +! +! FILE +! fortran/src/H5Eff.f90 +! +! PURPOSE +! This Module contains Fortran interfaces for H5E functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5E function to the module you must add the function name +! to the Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5E + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_FUNPTR, C_CHAR + USE H5GLOBAL + + !Turn on automatic printing of errors + INTEGER, PARAMETER :: PRINTON = 1 + + !Turn off automatic printing of errors + INTEGER, PARAMETER :: PRINTOFF = 0 + +CONTAINS + +!****s* H5E/h5eclear_f +! +! NAME +! h5eclear_f +! +! PURPOSE +! Clears the error stack for the current thread. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! estack_id - Error Stack id +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). April 6, 2001 +! +! Added optional error stack identifier in order to bring +! the function in line with the h5eclear2 routine. +! MSB, July 9, 2009 +! +! SOURCE + SUBROUTINE h5eclear_f(hdferr, estack_id) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: estack_id +!***** + INTEGER(HID_T) :: estack_id_default + + INTERFACE + INTEGER FUNCTION h5eclear_c(estack_id_default) BIND(C,NAME='h5eclear_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T) :: estack_id_default + END FUNCTION h5eclear_c + END INTERFACE + + estack_id_default = H5E_DEFAULT_F + IF(PRESENT(estack_id)) estack_id_default = estack_id + + hdferr = h5eclear_c(estack_id_default) + END SUBROUTINE h5eclear_f + +!****s* H5E/h5eprint_f +! +! NAME +! h5eprint_f +! +! PURPOSE +! Prints the error stack in a default manner. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! name - name of the file that contains print output +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). April 6, 2001 +! +! SOURCE + SUBROUTINE h5eprint_f(hdferr, name) + CHARACTER(LEN=*), OPTIONAL, INTENT(IN) :: name + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5eprint_c1(name, namelen) BIND(C,NAME='h5eprint_c1') + IMPORT :: C_CHAR + IMPLICIT NONE + INTEGER :: namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + END FUNCTION h5eprint_c1 + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5eprint_c2() BIND(C,NAME='h5eprint_c2') + END FUNCTION h5eprint_c2 + END INTERFACE + namelen = LEN(NAME) + IF (PRESENT(name)) THEN + hdferr = h5eprint_c1(name, namelen) + ELSE + hdferr = h5eprint_c2() + ENDIF + END SUBROUTINE h5eprint_f +!****s* H5E/h5eget_major_f +! +! NAME +! h5eget_major_f +! +! PURPOSE +! Returns a character string describing an error specified +! by a major error number. +! +! INPUTS +! error_no - major error number +! +! OUTPUTS +! name - character string describing the error +! namelen - number of characters in the name buffer +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). April 6, 2001 +! +! SOURCE + SUBROUTINE h5eget_major_f(error_no, name, namelen, hdferr) + INTEGER, INTENT(IN) :: error_no ! Major error number + CHARACTER(LEN=*), INTENT(OUT) :: name ! Character string describing + ! the error. + INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters + ! in name. + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5eget_major_c(error_no, name, namelen) BIND(C,NAME='h5eget_major_c') + IMPORT :: C_CHAR + IMPORT :: SIZE_T + IMPLICIT NONE + INTEGER :: error_no + CHARACTER(KIND=C_CHAR), DIMENSION(*) :: name + INTEGER(SIZE_T), INTENT(IN) :: namelen + END FUNCTION h5eget_major_c + END INTERFACE + + hdferr = h5eget_major_c(error_no, name, namelen) + END SUBROUTINE h5eget_major_f +!****s* H5E/h5eget_minor_f +! +! NAME +! h5eget_minor_f +! +! PURPOSE +! Returns a character string describing an error specified +! by a minor error number. +! +! INPUTS +! error_no - minor error number +! +! OUTPUTS +! name - character string describing the error +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). April 6, 2001 +! +! SOURCE + SUBROUTINE h5eget_minor_f(error_no, name, hdferr) + INTEGER, INTENT(IN) :: error_no ! Major error number + CHARACTER(LEN=*), INTENT(OUT) :: name ! Character string describing + ! the error + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5eget_minor_c(error_no, name) BIND(C,NAME='h5eget_minor_c') + IMPORT :: C_CHAR + INTEGER :: error_no + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + END FUNCTION h5eget_minor_c + END INTERFACE + + hdferr = h5eget_minor_c(error_no, name) + END SUBROUTINE h5eget_minor_f + +!****s* H5E/h5eset_auto_f +! +! NAME +! h5eset_auto_f +! +! PURPOSE +! Returns settings for automatic error stack traversal function and its data. +! +! Inputs: +! printflag - Flag to turn automatic error printing on or off; +! possible values are: +! printon (1) +! printoff(0) +! estack_id - Error stack identifier. +! func - Function to be called upon an error condition. +! client_data - Data passed to the error function +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! July 10, 2009 +! +! Fortran2003 Interface: + SUBROUTINE h5eset_auto_f(printflag, hdferr, estack_id, func, client_data) + USE, INTRINSIC :: ISO_C_BINDING + INTEGER , INTENT(IN) :: printflag + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T), INTENT(IN) , OPTIONAL :: estack_id + TYPE(C_FUNPTR), INTENT(IN) , OPTIONAL :: func + TYPE(C_PTR) , INTENT(IN) , OPTIONAL :: client_data +!***** + INTEGER(HID_T) :: estack_id_default + TYPE(C_FUNPTR) :: func_default + TYPE(C_PTR) :: client_data_default + INTERFACE + INTEGER FUNCTION h5eset_auto2_c(printflag, estack_id, func, client_data) & + BIND(C, NAME='h5eset_auto2_c') + IMPORT :: c_ptr, c_funptr + IMPORT :: HID_T + INTEGER :: printflag + INTEGER(HID_T) :: estack_id + TYPE(C_FUNPTR), VALUE :: func + TYPE(C_PTR), VALUE :: client_data + END FUNCTION h5eset_auto2_c + END INTERFACE + + estack_id_default = -1 + func_default = C_NULL_FUNPTR + client_data_default = C_NULL_PTR + + IF(PRESENT(estack_id)) estack_id_default = estack_id + IF(PRESENT(func)) func_default = func + IF(PRESENT(client_data)) client_data_default = client_data + + hdferr = h5eset_auto2_c(printflag, estack_id_default, func_default, client_data_default) + END SUBROUTINE h5eset_auto_f + +END MODULE H5E + diff --git a/fortran/src/H5Eff.f90 b/fortran/src/H5Eff.f90 deleted file mode 100644 index 7b56376..0000000 --- a/fortran/src/H5Eff.f90 +++ /dev/null @@ -1,251 +0,0 @@ -!****h* ROBODoc/H5E -! -! NAME -! MODULE H5E -! -! FILE -! fortran/src/H5Eff.f90 -! -! PURPOSE -! This Module contains Fortran interfaces for H5E functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5E function to the module you must add the function name -! to the Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5E - - USE H5GLOBAL - - !Turn on automatic printing of errors - INTEGER, PARAMETER :: PRINTON = 1 - - !Turn off automatic printing of errors - INTEGER, PARAMETER :: PRINTOFF = 0 - -CONTAINS - -!****s* H5E/h5eclear_f -! -! NAME -! h5eclear_f -! -! PURPOSE -! Clears the error stack for the current thread. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! estack_id - Error Stack id -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). April 6, 2001 -! -! Added optional error stack identifier in order to bring -! the function in line with the h5eclear2 routine. -! MSB, July 9, 2009 -! -! SOURCE - SUBROUTINE h5eclear_f(hdferr, estack_id) - IMPLICIT NONE - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: estack_id -!***** - INTEGER(HID_T) :: estack_id_default - - INTERFACE - INTEGER FUNCTION h5eclear_c(estack_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ECLEAR_C'::h5eclear_c - !DEC$ENDIF - INTEGER(HID_T) :: estack_id_default - END FUNCTION h5eclear_c - END INTERFACE - - estack_id_default = H5E_DEFAULT_F - IF(PRESENT(estack_id)) estack_id_default = estack_id - - hdferr = h5eclear_c(estack_id_default) - END SUBROUTINE h5eclear_f - -!****s* H5E/h5eprint_f -! -! NAME -! h5eprint_f -! -! PURPOSE -! Prints the error stack in a default manner. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! name - name of the file that contains print output -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). April 6, 2001 -! -! SOURCE - SUBROUTINE h5eprint_f(hdferr, name) - CHARACTER(LEN=*), OPTIONAL, INTENT(IN) :: name ! File name - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5eprint_c1(name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5EPRINT_C1'::h5eprint_c1 - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER :: namelen - CHARACTER(LEN=*),INTENT(IN) :: name - END FUNCTION h5eprint_c1 - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5eprint_c2() - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5EPRINT_C2'::h5eprint_c2 - !DEC$ENDIF - END FUNCTION h5eprint_c2 - END INTERFACE - namelen = LEN(NAME) - IF (PRESENT(name)) THEN - hdferr = h5eprint_c1(name, namelen) - ELSE - hdferr = h5eprint_c2() - ENDIF - END SUBROUTINE h5eprint_f -!****s* H5E/h5eget_major_f -! -! NAME -! h5eget_major_f -! -! PURPOSE -! Returns a character string describing an error specified -! by a major error number. -! -! INPUTS -! error_no - major error number -! -! OUTPUTS -! name - character string describing the error -! namelen - number of characters in the name buffer -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). April 6, 2001 -! -! SOURCE - SUBROUTINE h5eget_major_f(error_no, name, namelen, hdferr) - INTEGER, INTENT(IN) :: error_no ! Major error number - CHARACTER(LEN=*), INTENT(OUT) :: name ! Character string describing - ! the error. - INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters - ! in name. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5eget_major_c(error_no, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5EGET_MAJOR_C'::h5eget_major_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER :: error_no - CHARACTER(LEN=*) :: name - INTEGER(SIZE_T), INTENT(IN) :: namelen - END FUNCTION h5eget_major_c - END INTERFACE - - hdferr = h5eget_major_c(error_no, name, namelen) - END SUBROUTINE h5eget_major_f -!****s* H5E/h5eget_minor_f -! -! NAME -! h5eget_minor_f -! -! PURPOSE -! Returns a character string describing an error specified -! by a minor error number. -! -! INPUTS -! error_no - minor error number -! -! OUTPUTS -! name - character string describing the error -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). April 6, 2001 -! -! SOURCE - SUBROUTINE h5eget_minor_f(error_no, name, hdferr) - INTEGER, INTENT(IN) :: error_no ! Major error number - CHARACTER(LEN=*), INTENT(OUT) :: name ! Character string describing - ! the error - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5eget_minor_c(error_no, name) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5EGET_MINOR_C'::h5eget_minor_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER :: error_no - CHARACTER(LEN=*) :: name - END FUNCTION h5eget_minor_c - END INTERFACE - - hdferr = h5eget_minor_c(error_no, name) - END SUBROUTINE h5eget_minor_f - -END MODULE H5E - diff --git a/fortran/src/H5Eff_F03.f90 b/fortran/src/H5Eff_F03.f90 deleted file mode 100644 index ff8d11c..0000000 --- a/fortran/src/H5Eff_F03.f90 +++ /dev/null @@ -1,108 +0,0 @@ -!****h* ROBODoc/H5E (F03) -! -! NAME -! H5E_PROVISIONAL -! -! FILE -! src/fortran/src/H5Eff_F03.f90 -! -! PURPOSE -! -! This file contains Fortran 90 and Fortran 2003 interfaces for H5E functions. -! It contains the same functions as H5Eff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Eff_F90.f90 if Fortran 2003 functions are enabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5E function to the module you must add the function name -! to the Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5E_PROVISIONAL - - USE H5GLOBAL - -CONTAINS - -!****s* H5E/h5eset_auto_f -! -! NAME -! h5eset_auto_f -! -! PURPOSE -! Returns settings for automatic error stack traversal function and its data. -! -! Inputs: -! printflag - Flag to turn automatic error printing on or off; -! possible values are: -! printon (1) -! printoff(0) -! estack_id - Error stack identifier. -! func - Function to be called upon an error condition. -! client_data - Data passed to the error function -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! July 10, 2009 -! -! Fortran2003 Interface: - SUBROUTINE h5eset_auto_f(printflag, hdferr, estack_id, func, client_data) - USE, INTRINSIC :: ISO_C_BINDING - INTEGER , INTENT(IN) :: printflag - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T), INTENT(IN) , OPTIONAL :: estack_id - TYPE(C_FUNPTR), INTENT(IN) , OPTIONAL :: func - TYPE(C_PTR) , INTENT(IN) , OPTIONAL :: client_data -!***** - INTEGER(HID_T) :: estack_id_default - TYPE(C_FUNPTR) :: func_default - TYPE(C_PTR) :: client_data_default - INTERFACE - INTEGER FUNCTION h5eset_auto2_c(printflag, estack_id, func, client_data) & - BIND(C, NAME='h5eset_auto2_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, c_funptr - USE H5GLOBAL - INTEGER :: printflag - INTEGER(HID_T) :: estack_id -!!$ TYPE(C_FUNPTR) :: func -!!$ TYPE(C_PTR), VALUE :: client_data - TYPE(C_FUNPTR), VALUE :: func - TYPE(C_PTR), VALUE :: client_data - END FUNCTION h5eset_auto2_c - END INTERFACE - - estack_id_default = -1 - func_default = C_NULL_FUNPTR - client_data_default = C_NULL_PTR - - IF(PRESENT(estack_id)) estack_id_default = estack_id - IF(PRESENT(func)) func_default = func - IF(PRESENT(client_data)) client_data_default = client_data - - hdferr = h5eset_auto2_c(printflag, estack_id_default, func_default, client_data_default) - END SUBROUTINE h5eset_auto_f - -END MODULE H5E_PROVISIONAL diff --git a/fortran/src/H5Eff_F90.f90 b/fortran/src/H5Eff_F90.f90 deleted file mode 100644 index 158ec12..0000000 --- a/fortran/src/H5Eff_F90.f90 +++ /dev/null @@ -1,89 +0,0 @@ -!****h* ROBODoc/H5E (F90) -! -! NAME -! MODULE H5E_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5E functions. It contains -! the same functions as H5Eff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Eff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5E_PROVISIONAL - - USE H5GLOBAL - -CONTAINS - -!****s* H5E/h5eset_auto_f -! -! NAME -! h5eset_auto_f -! -! PURPOSE -! Turns automatic error printing on or off. -! -! INPUTS -! printflag - Flag to turn automatic error printing on or off; -! possible values are: -! printon (1) -! printoff(0) -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). April 6, 2001 -! -! SOURCE - SUBROUTINE h5eset_auto_f(printflag, hdferr) - INTEGER, INTENT(IN) :: printflag ! flag to turn automatic error - ! printing on or off - ! possible values are: - ! printon (1) - ! printoff(0) - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5eset_auto_c(printflag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ESET_AUTO_C'::h5eset_auto_c - !DEC$ENDIF - INTEGER :: printflag - END FUNCTION h5eset_auto_c - END INTERFACE - - hdferr = h5eset_auto_c(printflag) - END SUBROUTINE h5eset_auto_f - - -END MODULE H5E_PROVISIONAL diff --git a/fortran/src/H5FDmpiof.c b/fortran/src/H5FDmpiof.c deleted file mode 100644 index bbdb170..0000000 --- a/fortran/src/H5FDmpiof.c +++ /dev/null @@ -1,258 +0,0 @@ -/****h* H5FDmpiof/H5FDmpiof - * - * PURPOSE - * This file contains C stubs for Parallel Fortran APIs - * - * COPYRIGHT - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * - * All rights reserved. * - * * - * This file is part of HDF5. The full HDF5 copyright notice, including * - * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * - ****** -*/ - -#include "H5f90.h" -#include -#include "H5public.h" - - -/* Support for C to Fortran translation in MPI */ -#ifndef H5_HAVE_MPI_MULTI_LANG_Comm -#define MPI_Comm_c2f(comm) (int_f)(comm) -#define MPI_Comm_f2c(comm) (MPI_Comm)(comm) -#endif /*MPI Comm*/ -#ifndef H5_HAVE_MPI_MULTI_LANG_Info -#define MPI_Info_c2f(info) (int_f)(info) -#define MPI_Info_f2c(info) (MPI_Info)(info) -#endif /*MPI Info*/ - -/****if* H5FDmpiof/h5pset_fapl_mpio_c - * NAME - * h5pset_fapl_mpio_c - * PURPOSE - * Call H5Pset_fapl_mpio to set mode for parallel I/O and the user - * supplied communicator and info object - * INPUTS - * prp_id - property list identifier - * comm - MPI communicator - * info - MPI info object - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, October 26, 2000 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pset_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info) -/******/ -{ - int ret_value = -1; - hid_t c_prp_id; - herr_t ret; - MPI_Comm c_comm; - MPI_Info c_info; - c_comm = MPI_Comm_f2c(*comm); - c_info = MPI_Info_f2c(*info); - - /* - * Call H5Pset_mpi function. - */ - c_prp_id = *prp_id; - ret = H5Pset_fapl_mpio(c_prp_id, c_comm, c_info); - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} -/****if* H5FDmpiof/h5pget_fapl_mpio_c - * NAME - * h5pget_fapl_mpio_c - * PURPOSE - * Call H5Pget_fapl_mpio to retrieve communicator and info object - * INPUTS - * prp_id - property list identifier - * comm - buffer to return MPI communicator - * info - buffer to return MPI info object - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, October 26, 2000 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pget_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info) -/******/ -{ - int ret_value = -1; - hid_t c_prp_id; - herr_t ret; - MPI_Comm c_comm; - MPI_Info c_info; - - /* - * Call H5Pget_mpi function. - */ - c_prp_id = *prp_id; - ret = H5Pget_fapl_mpio(c_prp_id, &c_comm, &c_info); - if (ret < 0) return ret_value; - *comm = (int_f) MPI_Comm_c2f(c_comm); - *info = (int_f) MPI_Info_c2f(c_info); - ret_value = 0; - return ret_value; -} -/****if* H5FDmpiof/h5pset_dxpl_mpio_c - * NAME - * h5pset_dxpl_mpio_c - * PURPOSE - * Call H5Pset_dxpl_mpio to set transfer mode of the dataset - * trasfer property list - * INPUTS - * prp_id - property list identifier - * data_xfer_mode - transfer mode - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, October 26, 2000 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pset_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode) -/******/ -{ - int ret_value = -1; - hid_t c_prp_id; - herr_t ret; - H5FD_mpio_xfer_t c_data_xfer_mode; -/* - switch (*data_xfer_mode) { - - case H5FD_MPIO_INDEPENDENT_F: - c_data_xfer_mode = H5FD_MPIO_INDEPENDENT; - break; - - case H5FD_MPIO_COLLECTIVE_F: - c_data_xfer_mode = H5FD_MPIO_COLLECTIVE; - break; - default: - return ret_value; - } -*/ - c_data_xfer_mode = (H5FD_mpio_xfer_t)*data_xfer_mode; - /* - * Call H5Pset_dxpl_mpio function. - */ - c_prp_id = *prp_id; - ret = H5Pset_dxpl_mpio(c_prp_id, c_data_xfer_mode); - if (ret < 0) return ret_value; - ret_value = 0; - return ret_value; -} - -/****if* H5FDmpiof/h5pget_dxpl_mpio_c - * NAME - * h5pget_dxpl_mpio_c - * PURPOSE - * Call H5Pget_dxpl_mpio to get transfer mode of the dataset - * trasfer property list - * INPUTS - * prp_id - property list identifier - * data_xfer_mode - buffer to retrieve transfer mode - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Thursday, June 15, 2000 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pget_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode) -/******/ -{ - int ret_value = -1; - hid_t c_prp_id; - herr_t ret; - H5FD_mpio_xfer_t c_data_xfer_mode; - - /* - * Call H5Pget_xfer function. - */ - c_prp_id = *prp_id; - ret = H5Pget_dxpl_mpio(c_prp_id, &c_data_xfer_mode); - if (ret < 0) return ret_value; - *data_xfer_mode = (int_f)c_data_xfer_mode; -/* - switch (c_data_xfer_mode) { - - case H5FD_MPIO_INDEPENDENT: - *data_xfer_mode = H5FD_MPIO_INDEPENDENT_F; - break; - - case H5FD_MPIO_COLLECTIVE: - *data_xfer_mode = H5FD_MPIO_COLLECTIVE_F; - break; - - default: - return ret_value; - } -*/ - ret_value = 0; - return ret_value; -} - -/****if* H5Pf/h5pget_mpio_actual_io_mode_c - * NAME - * h5pget_mpio_actual_io_mode_c - * PURPOSE - * Calls H5Pget_mpio_actual_io_mode - * - * INPUTS - * dxpl_id - Dataset transfer property list identifier. - * OUTPUTS - * actual_io_mode - The type of I/O performed by this process. - * - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * M. Scot Breitenfeld - * July 27, 2012 - * SOURCE -*/ -int_f -nh5pget_mpio_actual_io_mode_c(hid_t_f *dxpl_id, int_f *actual_io_mode) -/******/ -{ - int ret_value = -1; - H5D_mpio_actual_io_mode_t c_actual_io_mode; - - /* - * Call H5Pget_mpio_actual_io_mode_f function. - */ - if( (H5Pget_mpio_actual_io_mode((hid_t)*dxpl_id, &c_actual_io_mode)) <0 ) - return ret_value; /* error occurred */ - - *actual_io_mode =(int_f)c_actual_io_mode; - - ret_value = 0; - return ret_value; -} diff --git a/fortran/src/H5FDmpioff.f90 b/fortran/src/H5FDmpioff.f90 deleted file mode 100644 index 50a77d9..0000000 --- a/fortran/src/H5FDmpioff.f90 +++ /dev/null @@ -1,212 +0,0 @@ -!****h* ROBODoc/H5FDMPIO -! -! NAME -! MODULE H5FDMPIO -! -! PURPOSE -! This file contains Fortran interfaces for H5P functions needed by -! parallel MPI programs. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5P function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5FDMPIO - USE H5GLOBAL -CONTAINS - -!****s* H5FDMPIO/h5pset_fapl_mpio_f -! -! NAME -! h5pset_fapl_mpio_f -! -! PURPOSE -! Stores MPI IO communicator information to the file -! access property list. -! -! INPUTS -! prp_id - file access property list identifier -! comm - MPI-2 communicator -! info - MPI-2 info object -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! November, 2000 -! -! SOURCE - SUBROUTINE h5pset_fapl_mpio_f(prp_id, comm, info, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: comm ! MPI communicator to be used for file open - ! as defined in MPI_FILE_OPEN of MPI-2 - INTEGER, INTENT(IN) :: info ! MPI info object to be used for file open - ! as defined in MPI_FILE_OPEN of MPI-2 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER, EXTERNAL :: h5pset_fapl_mpio_c - hdferr = h5pset_fapl_mpio_c(prp_id, comm, info) - END SUBROUTINE h5pset_fapl_mpio_f - -!****s* H5FDMPIO/h5pget_fapl_mpio_f -! -! NAME -! h5pget_fapl_mpio_f -! -! PURPOSE -! Returns MPI communicator information. -! -! INPUTS -! prp_id - file access property list identifier -! OUTPUTS -! comm - MPI-2 communicator -! info - MPI-2 info object -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! November, 2000 -! -! SOURCE - SUBROUTINE h5pget_fapl_mpio_f(prp_id, comm, info, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: comm ! buffer to return communicator - INTEGER, INTENT(OUT) :: info ! buffer to return info object - ! as defined in MPI_FILE_OPEN of MPI-2 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER, EXTERNAL :: h5pget_fapl_mpio_c - hdferr = h5pget_fapl_mpio_c(prp_id, comm, info) - END SUBROUTINE h5pget_fapl_mpio_f - -!****s* H5FDMPIO/h5pset_dxpl_mpio_f -! -! NAME -! h5pset_dxpl_mpio_f -! -! PURPOSE -! Sets data transfer mode. -! -! INPUTS -! prp_id - data transfer property list identifier -! data_xfer_mode - transfer mode; possible values are: -! H5FD_MPIO_INDEPENDENT_F -! H5FD_MPIO_COLLECTIVE_F -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! November, 2000 -! -! SOURCE - SUBROUTINE h5pset_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: data_xfer_mode ! Data transfer mode. Possible values are: - ! H5FD_MPIO_INDEPENDENT_F - ! H5FD_MPIO_COLLECTIVE_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER, EXTERNAL :: h5pset_dxpl_mpio_c - hdferr = h5pset_dxpl_mpio_c(prp_id, data_xfer_mode) - END SUBROUTINE h5pset_dxpl_mpio_f - -!****s* H5FDMPIO/h5pget_dxpl_mpio_f -! -! NAME -! h5pget_dxpl_mpio_f -! -! PURPOSE -! Returns the data transfer mode. -! -! INPUTS -! prp_id - data transfer property list identifier -! OUTPUTS -! data_xfer_mode- transfer mode; possible values are: -! H5FD_MPIO_INDEPENDENT_F -! H5FD_MPIO_COLLECTIVE_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! November, 2000 -! -! SOURCE - SUBROUTINE h5pget_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: data_xfer_mode ! Data transfer mode. Possible values are: - ! H5FD_MPIO_INDEPENDENT_F - ! H5FD_MPIO_COLLECTIVE_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER, EXTERNAL :: h5pget_dxpl_mpio_c - hdferr = h5pget_dxpl_mpio_c(prp_id, data_xfer_mode) - END SUBROUTINE h5pget_dxpl_mpio_f - -!****s* H5P/h5pget_mpio_actual_io_mode_f -! NAME -! h5pget_mpio_actual_io_mode_f -! -! PURPOSE -! Retrieves the type of I/O that HDF5 actually performed on the last -! parallel I/O call. This is not necessarily the type of I/O requested. -! -! INPUTS -! dxpl_id - Dataset transfer property list identifier. -! OUTPUTS -! actual_io_mode - The type of I/O performed by this process. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! July 27, 2012 -! -! HISTORY -! -! Fortran90 Interface: - SUBROUTINE h5pget_mpio_actual_io_mode_f(dxpl_id, actual_io_mode, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dxpl_id - INTEGER , INTENT(OUT) :: actual_io_mode - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5pget_mpio_actual_io_mode_c(dxpl_id, actual_io_mode) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_MPIO_ACTUAL_IO_MODE_C'::h5pget_mpio_actual_io_mode_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dxpl_id - INTEGER , INTENT(OUT) :: actual_io_mode - END FUNCTION h5pget_mpio_actual_io_mode_c - END INTERFACE - - actual_io_mode = -1 - - hdferr = h5pget_mpio_actual_io_mode_c(dxpl_id, actual_io_mode) - - END SUBROUTINE h5pget_mpio_actual_io_mode_f - -END MODULE H5FDMPIO diff --git a/fortran/src/H5Ff.c b/fortran/src/H5Ff.c index 1696672..c1cdb91 100644 --- a/fortran/src/H5Ff.c +++ b/fortran/src/H5Ff.c @@ -1,6 +1,6 @@ /****h* H5Ff/H5Ff * PURPOSE - * This file contains C stubs for H5F Fortran APIs + * This file contains C stubs for H5F Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -26,26 +26,26 @@ /****if* H5Ff/h5fcreate_c * NAME - * h5fcreate_c + * h5fcreate_c * PURPOSE - * Call H5Fcreate to create the file + * Call H5Fcreate to create the file * INPUTS - * name - name of the file - * namelen - name length - * access_flags - file access flags - * crt_pr - identifier of creation property list - * acc_prp - identifier of access property list + * name - name of the file + * namelen - name length + * access_flags - file access flags + * crt_pr - identifier of creation property list + * acc_prp - identifier of access property list * OUTPUTS - * file_id - file identifier + * file_id - file identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, July 26, 1999 + * Monday, July 26, 1999 * SOURCE */ int_f -nh5fcreate_c(_fcd name, int_f *namelen, int_f *access_flags, hid_t_f* crt_prp, hid_t_f *acc_prp, hid_t_f *file_id) +h5fcreate_c(_fcd name, int_f *namelen, int_f *access_flags, hid_t_f* crt_prp, hid_t_f *acc_prp, hid_t_f *file_id) /******/ { int ret_value = -1; @@ -95,23 +95,23 @@ nh5fcreate_c(_fcd name, int_f *namelen, int_f *access_flags, hid_t_f* crt_prp, h /****if* H5Ff/h5fflush_c * NAME - * h5fflush_c + * h5fflush_c * PURPOSE - * Call H5Fflush to flush the object + * Call H5Fflush to flush the object * INPUTS - * object_id - identifier of either a file, a dataset, - * a group, an attribute or a named data type - * scope - integer to specify the flushing action, either + * object_id - identifier of either a file, a dataset, + * a group, an attribute or a named data type + * scope - integer to specify the flushing action, either * H5F_SCOPE_GLOBAL or H5F_SCOPE_LOCAL * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, November 5, 1999 + * Friday, November 5, 1999 * SOURCE */ int_f -nh5fflush_c (hid_t_f *object_id, int_f *scope) +h5fflush_c (hid_t_f *object_id, int_f *scope) /******/ { int ret_value = -1; @@ -136,24 +136,24 @@ nh5fflush_c (hid_t_f *object_id, int_f *scope) /****if* H5Ff/h5fmount_c * NAME - * h5fmount_c + * h5fmount_c * PURPOSE - * Call H5Fmount to mount the file + * Call H5Fmount to mount the file * INPUTS - * loc_id - Identifier for file or group - * dsetname - name of dataset - * namelen - dsetname length - * file_id - file identifier for the file to be mounted - * acc_prp - identifier of access property list + * loc_id - Identifier for file or group + * dsetname - name of dataset + * namelen - dsetname length + * file_id - file identifier for the file to be mounted + * acc_prp - identifier of access property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Monday, October 25, 1999 + * Monday, October 25, 1999 * HISTORY */ int_f -nh5fmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen, hid_t_f *file_id, hid_t_f *acc_prp) +h5fmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen, hid_t_f *file_id, hid_t_f *acc_prp) /******/ { int ret_value = -1; @@ -194,22 +194,22 @@ nh5fmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen, hid_t_f *file_id, h /****if* H5Ff/h5funmount_c * NAME - * h5funmount_c + * h5funmount_c * PURPOSE - * Call H5Funmount to unmount the file + * Call H5Funmount to unmount the file * INPUTS - * loc_id - Identifier for file or group - * dsetname - name of dataset - * namelen - dsetname length + * loc_id - Identifier for file or group + * dsetname - name of dataset + * namelen - dsetname length * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Monday, October 25, 1999 + * Monday, October 25, 1999 * SOURCE */ int_f -nh5funmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen) +h5funmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen) /******/ { int ret_value = -1; @@ -242,25 +242,25 @@ nh5funmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen) /****if* H5Ff/h5fopen_c * NAME - * h5fopen_c + * h5fopen_c * PURPOSE - * Call H5Fopen to open the file + * Call H5Fopen to open the file * INPUTS - * name - name of the file - * namelen - name length - * access_flags - file access flags - * acc_prp - identifier of access property list + * name - name of the file + * namelen - name length + * access_flags - file access flags + * acc_prp - identifier of access property list * OUTPUTS - * file_id - file identifier + * file_id - file identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 3, 1999 + * Tuesday, August 3, 1999 * SOURCE */ int_f -nh5fopen_c (_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *acc_prp, hid_t_f *file_id) +h5fopen_c (_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *acc_prp, hid_t_f *file_id) /******/ { int ret_value = -1; @@ -305,22 +305,22 @@ nh5fopen_c (_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *acc_prp, hi /****if* H5Ff/h5freopen_c * NAME - * h5freopen_c + * h5freopen_c * PURPOSE - * Call H5Freopen to open the file + * Call H5Freopen to open the file * INPUTS - * file_id1 - file identifier + * file_id1 - file identifier * OUTPUTS - * file_id2 - file identifier + * file_id2 - file identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, November 3, 1999 + * Wednesday, November 3, 1999 * SOURCE */ int_f -nh5freopen_c (hid_t_f *file_id1, hid_t_f *file_id2) +h5freopen_c (hid_t_f *file_id1, hid_t_f *file_id2) /******/ { int ret_value = -1; @@ -338,22 +338,22 @@ nh5freopen_c (hid_t_f *file_id1, hid_t_f *file_id2) /****if* H5Ff/h5fget_create_plist_c * NAME - * h5fget_create_plist_c + * h5fget_create_plist_c * PURPOSE - * Call H5Fget_create_plist to get the file creation property list + * Call H5Fget_create_plist to get the file creation property list * INPUTS - * file_id - file identifier + * file_id - file identifier * OUTPUTS - * prop_id - creation property list identifier + * prop_id - creation property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal, Xiangyang Su - * Wednesday, November 3, 1999 + * Wednesday, November 3, 1999 * SOURCE */ int_f -nh5fget_create_plist_c (hid_t_f *file_id, hid_t_f *prop_id) +h5fget_create_plist_c (hid_t_f *file_id, hid_t_f *prop_id) /******/ { int ret_value = -1; @@ -371,24 +371,24 @@ nh5fget_create_plist_c (hid_t_f *file_id, hid_t_f *prop_id) /****if* H5Ff/h5fget_access_plist_c * NAME - * h5fget_access_plist_c + * h5fget_access_plist_c * PURPOSE - * Call H5Fget_access_plist to get the file access property list + * Call H5Fget_access_plist to get the file access property list * INPUTS - * file_id - file identifier + * file_id - file identifier * OUTPUTS - * access_id - access property list identifier + * access_id - access property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, September 30, 2002 + * Monday, September 30, 2002 * HISTORY * * SOURCE */ int_f -nh5fget_access_plist_c (hid_t_f *file_id, hid_t_f *access_id) +h5fget_access_plist_c (hid_t_f *file_id, hid_t_f *access_id) /******/ { int ret_value = -1; @@ -406,26 +406,26 @@ nh5fget_access_plist_c (hid_t_f *file_id, hid_t_f *access_id) /****if* H5Ff/h5fis_hdf5_c * NAME - * h5fis_hdf5_c + * h5fis_hdf5_c * PURPOSE - * Call H5Fis_hdf5 to determone if the file is an HDF5 file + * Call H5Fis_hdf5 to determone if the file is an HDF5 file * INPUTS - * name - name of the file - * namelen - name length + * name - name of the file + * namelen - name length * OUTPUTS - * flag - 0 if file is not HDF5 file , positive if a file - * is an HDF5 file, and negative on failure. + * flag - 0 if file is not HDF5 file , positive if a file + * is an HDF5 file, and negative on failure. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 3, 1999 + * Tuesday, August 3, 1999 * HISTORY * * SOURCE */ int_f -nh5fis_hdf5_c (_fcd name, int_f *namelen, int_f *flag) +h5fis_hdf5_c (_fcd name, int_f *namelen, int_f *flag) /******/ { int ret_value = -1; @@ -452,23 +452,23 @@ nh5fis_hdf5_c (_fcd name, int_f *namelen, int_f *flag) } /****if* H5Ff/h5fclose_c * NAME - * h5fclose_c + * h5fclose_c * PURPOSE - * Call H5Fclose to close the file + * Call H5Fclose to close the file * INPUTS - * file_id - identifier of the file to be closed + * file_id - identifier of the file to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, July 26, 1999 + * Monday, July 26, 1999 * HISTORY * * SOURCE */ int_f -nh5fclose_c ( hid_t_f *file_id ) +h5fclose_c ( hid_t_f *file_id ) /******/ { int ret_value = 0; @@ -480,27 +480,27 @@ nh5fclose_c ( hid_t_f *file_id ) } /****if* H5Ff/h5fget_obj_count_c * NAME - * h5fget_obj_count_c + * h5fget_obj_count_c * PURPOSE - * Call H5Fget_obj_count to get number of open objects within a file + * Call H5Fget_obj_count to get number of open objects within a file * INPUTS - * file_id - identifier of the file to be closed - * obj_type - type of the object + * file_id - identifier of the file to be closed + * obj_type - type of the object * RETURNS - * obj_count - number of objects - * 0 on success, -1 on failure + * obj_count - number of objects + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, September 30, 2002 + * Monday, September 30, 2002 * HISTORY * - * Changed type of obj_count to size_t_f - * Thursday, September 25, 2008 + * Changed type of obj_count to size_t_f + * Thursday, September 25, 2008 * SOURCE */ int_f -nh5fget_obj_count_c ( hid_t_f *file_id , int_f *obj_type, size_t_f * obj_count) +h5fget_obj_count_c ( hid_t_f *file_id , int_f *obj_type, size_t_f * obj_count) /******/ { int ret_value = 0; @@ -525,7 +525,7 @@ nh5fget_obj_count_c ( hid_t_f *file_id , int_f *obj_type, size_t_f * obj_count) * obj_type - type of the object * RETURNS * obj_ids - iarray of open objects identifiers - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Monday, September 30, 2002 @@ -538,7 +538,7 @@ nh5fget_obj_count_c ( hid_t_f *file_id , int_f *obj_type, size_t_f * obj_count) * SOURCE */ int_f -nh5fget_obj_ids_c ( hid_t_f *file_id , int_f *obj_type, size_t_f *max_objs, +h5fget_obj_ids_c ( hid_t_f *file_id , int_f *obj_type, size_t_f *max_objs, hid_t_f *obj_ids, size_t_f *num_objs) /******/ { @@ -569,22 +569,22 @@ nh5fget_obj_ids_c ( hid_t_f *file_id , int_f *obj_type, size_t_f *max_objs, /****if* H5Ff/h5fget_freespace_c * NAME - * h5fget_freespace_c + * h5fget_freespace_c * PURPOSE - * Call H5Fget_freespace to get amount of free space within a file + * Call H5Fget_freespace to get amount of free space within a file * INPUTS - * file_id - identifier of the file to query + * file_id - identifier of the file to query * RETURNS - * free_space - amount of free space in file - * 0 on success, -1 on failure + * free_space - amount of free space in file + * 0 on success, -1 on failure * AUTHOR * Quincey Koziol - * Tuesday, October 7, 2003 + * Tuesday, October 7, 2003 * SOURCE */ int_f -nh5fget_freespace_c ( hid_t_f *file_id , hssize_t_f *free_space) +h5fget_freespace_c ( hid_t_f *file_id , hssize_t_f *free_space) /******/ { int ret_value = 0; @@ -599,24 +599,24 @@ nh5fget_freespace_c ( hid_t_f *file_id , hssize_t_f *free_space) /****if* H5Ff/h5fget_name_c * NAME - * h5fget_name_c + * h5fget_name_c * PURPOSE - * Call H5Fget_name to get file's name + * Call H5Fget_name to get file's name * INPUTS - * obj_id - object identifier - * buflen -size of the buffer + * obj_id - object identifier + * buflen -size of the buffer * OUTPUTS - * buf - buffer to hold the name - * size - size of the file's name + * buf - buffer to hold the name + * size - size of the file's name * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, July 6, 2004 + * Tuesday, July 6, 2004 * SOURCE */ int_f -nh5fget_name_c(hid_t_f *obj_id, size_t_f *size, _fcd buf, size_t_f *buflen) +h5fget_name_c(hid_t_f *obj_id, size_t_f *size, _fcd buf, size_t_f *buflen) /******/ { char *c_buf = NULL; /* Buffer to hold C string */ @@ -648,22 +648,22 @@ done: /****if* H5Ff/h5fget_filesize_c * NAME - * h5fget_filesize_c + * h5fget_filesize_c * PURPOSE - * Call H5Fget_filesize to get file size + * Call H5Fget_filesize to get file size * INPUTS - * file_id - file identifier + * file_id - file identifier * OUTPUTS - * size - size of the file + * size - size of the file * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, July 7, 2004 + * Wednesday, July 7, 2004 * SOURCE */ int_f -nh5fget_filesize_c(hid_t_f *file_id, hsize_t_f *size) +h5fget_filesize_c(hid_t_f *file_id, hsize_t_f *size) /******/ { hsize_t size_c; diff --git a/fortran/src/H5Fff.F90 b/fortran/src/H5Fff.F90 new file mode 100644 index 0000000..c69ad82 --- /dev/null +++ b/fortran/src/H5Fff.F90 @@ -0,0 +1,871 @@ +!****h* ROBODoc/H5F +! +! NAME +! MODULE H5F +! +! FILE +! H5Fff.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5F functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5F function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5F + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR, C_NULL_PTR + USE H5GLOBAL + IMPLICIT NONE + +CONTAINS +!****s* H5F/h5fcreate_f +! +! NAME +! h5fcreate_f +! +! PURPOSE +! Creates HDF5 files. +! +! INPUTS +! name - name of the file to create +! access_flags - File access flags. Allowable values are: +! H5F_ACC_TRUNC_F +! H5F_ACC_EXCL_F +! OUTPUTS +! file_id - file identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! creation_prp - file creation property list identifier +! access_prp - file access property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fcreate_f(name, access_flags, file_id, hdferr, & + creation_prp, access_prp) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file + INTEGER, INTENT(IN) :: access_flags ! File access flags + INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp + ! File creation propertly + ! list identifier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp + ! File access property list + ! identifier +!***** + INTEGER(HID_T) :: creation_prp_default + INTEGER(HID_T) :: access_prp_default + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5fcreate_c(name, namelen, access_flags, & + creation_prp_default, access_prp_default, file_id) BIND(C,NAME='h5fcreate_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: access_flags + INTEGER(HID_T), INTENT(OUT) :: file_id + INTEGER(HID_T), INTENT(IN) :: creation_prp_default + INTEGER(HID_T), INTENT(IN) :: access_prp_default + INTEGER :: namelen + END FUNCTION h5fcreate_c + END INTERFACE + + creation_prp_default = H5P_DEFAULT_F + access_prp_default = H5P_DEFAULT_F + + IF (PRESENT(creation_prp)) creation_prp_default = creation_prp + IF (PRESENT(access_prp)) access_prp_default = access_prp + namelen = LEN_TRIM(name) + hdferr = h5fcreate_c(name, namelen, access_flags, & + creation_prp_default, access_prp_default, file_id) + + END SUBROUTINE h5fcreate_f +!****s* H5F/h5fflush_f +! +! NAME +! h5fflush_f +! +! PURPOSE +! Flushes all buffers associated WITH a file to disk +! +! INPUTS +! object_id - identifier of object used to identify the file. +! scope - specifies the scope of the flushing action. +! Possible values are: +! H5F_SCOPE_GLOBAL_F +! H5F_SCOPE_LOCAL_F +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! creation_prp - file creation property list identifier +! access_prp - file access property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fflush_f(object_id, scope, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id !identifier for any object + !associate with a file, + !including the file itself, + !a dataset, a group, an + !attribute, or a named + !data type + + INTEGER, INTENT(IN) :: scope !scope of the flushing + !action, possible values + !are: H5F_SCOPE_GLOBAL_F + ! which flushes the entire + !virtual file, + !and H5F_SCOPE_LOCAL_F + !which flushes only the + !specified file. + + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5fflush_c(object_id, scope) BIND(C,NAME='h5fflush_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER, INTENT(IN) :: scope + END FUNCTION h5fflush_c + END INTERFACE + + hdferr = h5fflush_c(object_id, scope) + + END SUBROUTINE h5fflush_f +!****s* H5F/h5fmount_f +! +! NAME +! h5fmount_f +! +! PURPOSE +! Mounts a file. +! +! INPUTS +! loc_id - the identifier for of file or group in +! which name is defined +! name - the name of the group onto which the file +! specified by child_id is to be mounted. +! child_id - the identifier of the file to be mounted. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! access_prp - the identifier of the property list to be used +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fmount_f(loc_id, name, child_id, hdferr, access_prp) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier for file or group + ! in which dsetname is defined + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group + INTEGER(HID_T), INTENT(IN) :: child_id ! File identifier for the + ! file to be mounted + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp + ! File access property list + ! identifier +!***** + INTEGER(HID_T) :: access_prp_default + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5fmount_c(loc_id, name, namelen, & + child_id, access_prp_default) BIND(C,NAME='h5fmount_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(HID_T), INTENT(IN) :: child_id + INTEGER(HID_T), INTENT(IN) :: access_prp_default + INTEGER :: namelen + END FUNCTION h5fmount_c + END INTERFACE + + access_prp_default = H5P_DEFAULT_F + IF (PRESENT(access_prp)) access_prp_default = access_prp + namelen = LEN_TRIM(name) + hdferr = h5fmount_c(loc_id, name, namelen, child_id, access_prp_default) + + END SUBROUTINE h5fmount_f + +!****s* H5F/h5funmount_f +! +! NAME +! h5funmount_f +! +! PURPOSE +! Unmounts a file. +! +! INPUTS +! loc_id - the identifier for of file or group in +! which name is defined +! name - the name of the mount point +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5funmount_f(loc_id, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier for file or group + ! at which the specified file + ! is to be unmounted + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the mount point + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5funmount_c(loc_id, name, namelen) BIND(C,NAME='h5funmount_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + END FUNCTION h5funmount_c + END INTERFACE + + namelen = LEN_TRIM(name) + hdferr = h5funmount_c(loc_id, name, namelen) + + END SUBROUTINE h5funmount_f +!****s* H5F/h5fopen_f +! +! NAME +! h5fopen_f +! +! PURPOSE +! Opens HDF5 file. +! +! INPUTS +! name - name of the file to acecss +! access_flags - File access flags. Allowable values are: +! H5F_ACC_RDWR_F +! H5F_ACC_RDONLY_F +! OUTPUTS +! file_id - file identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! access_prp - file access property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fopen_f(name, access_flags, file_id, hdferr, access_prp) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file + INTEGER, INTENT(IN) :: access_flags ! File access flags + INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp + ! File access property list + ! identifier +!***** + INTEGER(HID_T) :: access_prp_default + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5fopen_c(name, namelen, access_flags, & + access_prp_default, file_id) BIND(C,NAME='h5fopen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER, INTENT(IN) :: access_flags + INTEGER(HID_T), INTENT(IN) :: access_prp_default + INTEGER(HID_T), INTENT(OUT) :: file_id + END FUNCTION h5fopen_c + END INTERFACE + + access_prp_default = H5P_DEFAULT_F + IF (PRESENT(access_prp)) access_prp_default = access_prp + namelen = LEN_TRIM(name) + hdferr = h5fopen_c(name, namelen, access_flags, & + access_prp_default, file_id) + END SUBROUTINE h5fopen_f +!****s* H5F/h5freopen_f +! +! NAME +! h5freopen_f +! +! PURPOSE +! Reopens HDF5 file. +! +! INPUTS +! file_id - identifier of a file for which an +! additional identifier is required +! OUTPUTS +! ret_file_id - new file identifier +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5freopen_f(file_id, ret_file_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER(HID_T), INTENT(OUT) :: ret_file_id ! New File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5freopen_c(file_id, ret_file_id) BIND(C,NAME='h5freopen_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER(HID_T), INTENT(OUT) :: ret_file_id + END FUNCTION h5freopen_c + END INTERFACE + + hdferr = h5freopen_c(file_id, ret_file_id) + + END SUBROUTINE h5freopen_f +!****s* H5F/h5fget_create_plist_f +! +! NAME +! h5fget_create_plist_f +! +! PURPOSE +! Returns a file creation property list identifier. +! +! INPUTS +! file_id - identifier of a file to creation property list of +! OUTPUTS +! prop_id - creation property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fget_create_plist_f(file_id, prop_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER(HID_T), INTENT(OUT) :: prop_id ! File creation property + ! list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5fget_create_plist_c(file_id, prop_id) BIND(C,NAME='h5fget_create_plist_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER(HID_T), INTENT(OUT) :: prop_id + END FUNCTION h5fget_create_plist_c + END INTERFACE + + hdferr = h5fget_create_plist_c(file_id, prop_id) + + END SUBROUTINE h5fget_create_plist_f +!****s* H5F/h5fget_access_plist_f +! +! NAME +! h5fget_access_plist_f +! +! PURPOSE +! Returns a file access property list identifier. +! +! INPUTS +! file_id - identifier of a file to creation property list of +! OUTPUTS +! access_id - access property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fget_access_plist_f(file_id, access_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER(HID_T), INTENT(OUT) :: access_id ! File access property + ! list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5fget_access_plist_c(file_id, access_id) BIND(C,NAME='h5fget_access_plist_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER(HID_T), INTENT(OUT) :: access_id + END FUNCTION h5fget_access_plist_c + END INTERFACE + + hdferr = h5fget_access_plist_c(file_id, access_id) + + END SUBROUTINE h5fget_access_plist_f + +!****s* H5F/h5fis_hdf5_f +! +! NAME +! h5fis_hdf5_f +! +! PURPOSE +! Determines whether a file is in the HDF5 format. +! +! INPUTS +! name - name of the file to check +! OUTPUTS +! status - indicates if file is and HDF5 file +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fis_hdf5_f(name, status, hdferr) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file + LOGICAL, INTENT(OUT) :: status ! Indicates if file + ! is an HDF5 file + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Length of the name character string + INTEGER :: flag ! "TRUE/FALSE" flag from C routine + ! to define status value. + + INTERFACE + INTEGER FUNCTION h5fis_hdf5_c(name, namelen, flag) BIND(C,NAME='h5fis_hdf5_c') + IMPORT :: C_CHAR + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER :: flag + END FUNCTION h5fis_hdf5_c + END INTERFACE + + namelen = LEN_TRIM(name) + hdferr = h5fis_hdf5_c(name, namelen, flag) + status = .TRUE. + IF (flag .EQ. 0) status = .FALSE. + + END SUBROUTINE h5fis_hdf5_f +!****s* H5F/h5fclose_f +! +! NAME +! h5fclose_f +! +! PURPOSE +! Closes HDF5 file. +! +! INPUTS +! file_id - file identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! SOURCE + SUBROUTINE h5fclose_f(file_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5fclose_c(file_id) BIND(C,NAME='h5fclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + END FUNCTION h5fclose_c + END INTERFACE + + hdferr = h5fclose_c(file_id) + + END SUBROUTINE h5fclose_f + +!****s* H5F/h5fget_obj_count_f +! +! NAME +! h5fget_obj_count_f +! +! PURPOSE +! Gets number of the objects open within a file +! +! INPUTS +! file_id - file identifier +! obj_type - type of the object; possible values are: +! H5F_OBJ_FILE_F +! H5F_OBJ_DATASET_F +! H5F_OBJ_GROUP_F +! H5F_OBJ_DATATYPE_F +! H5F_OBJ_ALL_F +! OUTPUTS +! obj_count - number of open objects +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! September 30, 2002 +! +! HISTORY +! Changed the type of obj_count to INTEGER(SIZE_T) +! September 25, 2008 EIP +! +! SOURCE + SUBROUTINE h5fget_obj_count_f(file_id, obj_type, obj_count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER, INTENT(IN) :: obj_type + INTEGER(SIZE_T), INTENT(OUT) :: obj_count + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5fget_obj_count_c(file_id, obj_type, obj_count) BIND(C,NAME='h5fget_obj_count_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER, INTENT(IN) :: obj_type + INTEGER(SIZE_T), INTENT(OUT) :: obj_count + END FUNCTION h5fget_obj_count_c + END INTERFACE + + hdferr = h5fget_obj_count_c(file_id, obj_type, obj_count) + + END SUBROUTINE h5fget_obj_count_f + +!****s* H5F/h5fget_obj_ids_f +! +! NAME +! h5fget_obj_ids_f +! +! PURPOSE +! Get list of open objects identifiers within a file +! +! INPUTS +! file_id - file identifier +! obj_type - type of the object; possible values are: +! H5F_OBJ_FILE_F +! H5F_OBJ_DATASET_F +! H5F_OBJ_GROUP_F +! H5F_OBJ_DATATYPE_F +! H5F_OBJ_ALL_F +! OUTPUTS +! obj_ids - array of open object identifiers +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! num_objs - number of open objects +! +! AUTHOR +! Elena Pourmal +! September 30, 2002 +! +! HISTORY +! Added optional parameter num_objs for number of open objects +! of the specified type and changed type of max_obj to +! INTEGER(SIZE_T) +! September 25, 2008 EIP +! +! SOURCE + SUBROUTINE h5fget_obj_ids_f(file_id, obj_type, max_objs, obj_ids, hdferr, num_objs) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER, INTENT(IN) :: obj_type ! Object type + INTEGER(SIZE_T), INTENT(IN) :: max_objs ! Maximum # of objects to retrieve + INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids + ! Array of open objects iidentifiers + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: num_objs ! number of open objects +!***** + INTEGER(SIZE_T) :: c_num_objs ! Number of open objects of the specified type + + INTERFACE + INTEGER FUNCTION h5fget_obj_ids_c(file_id, obj_type, max_objs, obj_ids, c_num_objs) & + BIND(C,NAME='h5fget_obj_ids_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER, INTENT(IN) :: obj_type + INTEGER(SIZE_T), INTENT(IN) :: max_objs + INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids + INTEGER(SIZE_T), INTENT(OUT) :: c_num_objs + END FUNCTION h5fget_obj_ids_c + END INTERFACE + + hdferr = h5fget_obj_ids_c(file_id, obj_type, max_objs, obj_ids, c_num_objs) + IF (PRESENT(num_objs)) num_objs= c_num_objs + + END SUBROUTINE h5fget_obj_ids_f +!****s* H5F/h5fget_freespace_f +! +! NAME +! h5fget_freespace_f +! +! PURPOSE +! Get amount of free space within a file +! +! INPUTS +! file_id - file identifier +! OUTPUTS +! free_space - amount of free space in file +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Quincey Koziol +! October 7, 2003 +! +! SOURCE + SUBROUTINE h5fget_freespace_f(file_id, free_space, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier + INTEGER(HSSIZE_T), INTENT(OUT) :: free_space + ! amount of free space in file + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5fget_freespace_c(file_id, free_space) & + BIND(C,NAME='h5fget_freespace_c') + IMPORT :: HID_T, HSSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER(HSSIZE_T), INTENT(OUT) :: free_space + END FUNCTION h5fget_freespace_c + END INTERFACE + + hdferr = h5fget_freespace_c(file_id, free_space) + + END SUBROUTINE h5fget_freespace_f +!****s* H5F/h5fget_name_f +! +! NAME +! h5fget_name_f +! +! PURPOSE +! Gets the name of the file from the object identifier +! +! INPUTS +! obj_id - object identifier +! OUTPUTS +! buf - buffer to store the read name +! size - actual size of the name +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! July 6, 2004 +! +! SOURCE + SUBROUTINE h5fget_name_f(obj_id, buf, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + CHARACTER(LEN=*), INTENT(INOUT) :: buf + ! Buffer to hold file name + INTEGER(SIZE_T), INTENT(OUT) :: size ! Size of the file name + INTEGER, INTENT(OUT) :: hdferr ! Error code: 0 on success, + ! -1 if fail +!***** + INTEGER(SIZE_T) :: buflen + + INTERFACE + INTEGER FUNCTION h5fget_name_c(obj_id, size, buf, buflen) & + BIND(C,NAME='h5fget_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER(SIZE_T), INTENT(OUT) :: size + INTEGER(SIZE_T) :: buflen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buf + END FUNCTION h5fget_name_c + END INTERFACE + buflen = LEN_TRIM(buf) + hdferr = h5fget_name_c(obj_id, size, buf, buflen) + END SUBROUTINE h5fget_name_f +!****s* H5F/h5fget_filesize_f +! +! NAME +! h5fget_filesize_f +! +! PURPOSE +! Retrieves the file size of the HDF5 file. +! +! INPUTS +! file_id - file identifier +! OUTPUTS +! size - file size +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! July 7, 2004 +! +! SOURCE + SUBROUTINE h5fget_filesize_f(file_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id ! file identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Size of the file + INTEGER, INTENT(OUT) :: hdferr ! Error code: 0 on success, + ! -1 if fail +!***** + INTERFACE + INTEGER FUNCTION h5fget_filesize_c(file_id, size) & + BIND(C,NAME='h5fget_filesize_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: file_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5fget_filesize_c + END INTERFACE + hdferr = h5fget_filesize_c(file_id, size) + END SUBROUTINE h5fget_filesize_f + +!****s* H5F (F03)/h5fget_file_image_f_F03 +! +! NAME +! h5fget_file_image_f +! +! PURPOSE +! Retrieves a copy of the image of an existing, open file. +! +! INPUTS +! file_id - Target file identifier. +! buf_ptr - Pointer to the buffer into which the image of the HDF5 file is to be copied. +! buf_len - Size of the supplied buffer. +! +! OUTPUTS +! hdferr - error code: +! 0 on success and -1 on failure +! OPTIONAL PARAMETERS +! buf_size - Returns the size in bytes of the buffer required to store the file image, +! no data will be copied. +! +! AUTHOR +! M. Scot Breitenfeld +! November 26, 2012 +! +! Fortran2003 Interface: + SUBROUTINE h5fget_file_image_f(file_id, buf_ptr, buf_len, hdferr, buf_size) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: file_id + TYPE(C_PTR) , INTENT(INOUT) :: buf_ptr + INTEGER(SIZE_T), INTENT(IN) :: buf_len + INTEGER , INTENT(OUT) :: hdferr + INTEGER(SIZE_T), INTENT(OUT) , OPTIONAL :: buf_size +!***** + + INTEGER(SIZE_T) :: buf_size_default + + INTERFACE + INTEGER FUNCTION h5fget_file_image_c(file_id, buf_ptr, buf_len, buf_size) BIND(C, NAME='h5fget_file_image_c') + IMPORT :: C_PTR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: file_id + TYPE(C_PTR) , VALUE :: buf_ptr + INTEGER(SIZE_T), INTENT(IN) :: buf_len + INTEGER(SIZE_T), INTENT(IN) :: buf_size + END FUNCTION h5fget_file_image_c + END INTERFACE + + IF(PRESENT(buf_size))THEN + buf_ptr = C_NULL_PTR + ENDIF + + hdferr = h5fget_file_image_c(file_id, buf_ptr, buf_len, buf_size_default) + + IF(PRESENT(buf_size))THEN + buf_size = buf_size_default + ENDIF + + END SUBROUTINE h5fget_file_image_f + +END MODULE H5F diff --git a/fortran/src/H5Fff.f90 b/fortran/src/H5Fff.f90 deleted file mode 100644 index faa1967..0000000 --- a/fortran/src/H5Fff.f90 +++ /dev/null @@ -1,834 +0,0 @@ -!****h* ROBODoc/H5F -! -! NAME -! MODULE H5F -! -! FILE -! H5Fff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5F functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5F function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5F - USE H5GLOBAL - -CONTAINS -!****s* H5F/h5fcreate_f -! -! NAME -! h5fcreate_f -! -! PURPOSE -! Creates HDF5 files. -! -! INPUTS -! name - name of the file to create -! access_flags - File access flags. Allowable values are: -! H5F_ACC_TRUNC_F -! H5F_ACC_EXCL_F -! OUTPUTS -! file_id - file identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! creation_prp - file creation property list identifier -! access_prp - file access property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fcreate_f(name, access_flags, file_id, hdferr, & - creation_prp, access_prp) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file - INTEGER, INTENT(IN) :: access_flags ! File access flags - INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp - ! File creation propertly - ! list identifier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp - ! File access property list - ! identifier -!***** - INTEGER(HID_T) :: creation_prp_default - INTEGER(HID_T) :: access_prp_default - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5fcreate_c(name, namelen, access_flags, & - creation_prp_default, access_prp_default, file_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FCREATE_C':: h5fcreate_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: access_flags - INTEGER(HID_T), INTENT(OUT) :: file_id - INTEGER(HID_T), INTENT(IN) :: creation_prp_default - INTEGER(HID_T), INTENT(IN) :: access_prp_default - INTEGER :: namelen - END FUNCTION h5fcreate_c - END INTERFACE - - creation_prp_default = H5P_DEFAULT_F - access_prp_default = H5P_DEFAULT_F - - IF (PRESENT(creation_prp)) creation_prp_default = creation_prp - IF (PRESENT(access_prp)) access_prp_default = access_prp - namelen = LEN_TRIM(name) - hdferr = h5fcreate_c(name, namelen, access_flags, & - creation_prp_default, access_prp_default, file_id) - - END SUBROUTINE h5fcreate_f -!****s* H5F/h5fflush_f -! -! NAME -! h5fflush_f -! -! PURPOSE -! Flushes all buffers associated WITH a file to disk -! -! INPUTS -! object_id - identifier of object used to identify the file. -! scope - specifies the scope of the flushing action. -! Possible values are: -! H5F_SCOPE_GLOBAL_F -! H5F_SCOPE_LOCAL_F -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! creation_prp - file creation property list identifier -! access_prp - file access property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fflush_f(object_id, scope, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: object_id !identifier for any object - !associate with a file, - !including the file itself, - !a dataset, a group, an - !attribute, or a named - !data type - - INTEGER, INTENT(IN) :: scope !scope of the flushing - !action, possible values - !are: H5F_SCOPE_GLOBAL_F - ! which flushes the entire - !virtual file, - !and H5F_SCOPE_LOCAL_F - !which flushes only the - !specified file. - - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fflush_c(object_id, scope) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FFLUSH_C':: h5fflush_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER, INTENT(IN) :: scope - END FUNCTION h5fflush_c - END INTERFACE - - hdferr = h5fflush_c(object_id, scope) - - END SUBROUTINE h5fflush_f -!****s* H5F/h5fmount_f -! -! NAME -! h5fmount_f -! -! PURPOSE -! Mounts a file. -! -! INPUTS -! loc_id - the identifier for of file or group in -! which name is defined -! name - the name of the group onto which the file -! specified by child_id is to be mounted. -! child_id - the identifier of the file to be mounted. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! access_prp - the identifier of the property list to be used -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fmount_f(loc_id, name, child_id, hdferr, access_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier for file or group - ! in which dsetname is defined - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group - INTEGER(HID_T), INTENT(IN) :: child_id ! File identifier for the - ! file to be mounted - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp - ! File access property list - ! identifier -!***** - INTEGER(HID_T) :: access_prp_default - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5fmount_c(loc_id, name, namelen, & - child_id, access_prp_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FMOUNT_C':: h5fmount_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(HID_T), INTENT(IN) :: child_id - INTEGER(HID_T), INTENT(IN) :: access_prp_default - INTEGER :: namelen - END FUNCTION h5fmount_c - END INTERFACE - - access_prp_default = H5P_DEFAULT_F - IF (PRESENT(access_prp)) access_prp_default = access_prp - namelen = LEN_TRIM(name) - hdferr = h5fmount_c(loc_id, name, namelen, child_id, access_prp_default) - - END SUBROUTINE h5fmount_f - -!****s* H5F/h5funmount_f -! -! NAME -! h5funmount_f -! -! PURPOSE -! Unmounts a file. -! -! INPUTS -! loc_id - the identifier for of file or group in -! which name is defined -! name - the name of the mount point -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5funmount_f(loc_id, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier for file or group - ! at which the specified file - ! is to be unmounted - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the mount point - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5funmount_c(loc_id, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FUNMOUNT_C':: h5funmount_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - END FUNCTION h5funmount_c - END INTERFACE - - namelen = LEN_TRIM(name) - hdferr = h5funmount_c(loc_id, name, namelen) - - END SUBROUTINE h5funmount_f -!****s* H5F/h5fopen_f -! -! NAME -! h5fopen_f -! -! PURPOSE -! Opens HDF5 file. -! -! INPUTS -! name - name of the file to acecss -! access_flags - File access flags. Allowable values are: -! H5F_ACC_RDWR_F -! H5F_ACC_RDONLY_F -! OUTPUTS -! file_id - file identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! access_prp - file access property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fopen_f(name, access_flags, file_id, hdferr, access_prp) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file - INTEGER, INTENT(IN) :: access_flags ! File access flags - INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp - ! File access property list - ! identifier -!***** - INTEGER(HID_T) :: access_prp_default - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5fopen_c(name, namelen, access_flags, & - access_prp_default, file_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FOPEN_C':: h5fopen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER, INTENT(IN) :: access_flags - INTEGER(HID_T), INTENT(IN) :: access_prp_default - INTEGER(HID_T), INTENT(OUT) :: file_id - END FUNCTION h5fopen_c - END INTERFACE - - access_prp_default = H5P_DEFAULT_F - IF (PRESENT(access_prp)) access_prp_default = access_prp - namelen = LEN_TRIM(name) - hdferr = h5fopen_c(name, namelen, access_flags, & - access_prp_default, file_id) - END SUBROUTINE h5fopen_f -!****s* H5F/h5freopen_f -! -! NAME -! h5freopen_f -! -! PURPOSE -! Reopens HDF5 file. -! -! INPUTS -! file_id - identifier of a file for which an -! additional identifier is required -! OUTPUTS -! ret_file_id - new file identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5freopen_f(file_id, ret_file_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER(HID_T), INTENT(OUT) :: ret_file_id ! New File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5freopen_c(file_id, ret_file_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FREOPEN_C':: h5freopen_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER(HID_T), INTENT(OUT) :: ret_file_id - END FUNCTION h5freopen_c - END INTERFACE - - hdferr = h5freopen_c(file_id, ret_file_id) - - END SUBROUTINE h5freopen_f -!****s* H5F/h5fget_create_plist_f -! -! NAME -! h5fget_create_plist_f -! -! PURPOSE -! Returns a file creation property list identifier. -! -! INPUTS -! file_id - identifier of a file to creation property list of -! OUTPUTS -! prop_id - creation property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fget_create_plist_f(file_id, prop_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER(HID_T), INTENT(OUT) :: prop_id ! File creation property - ! list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fget_create_plist_c(file_id, prop_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_CREATE_PLIST_C':: h5fget_create_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER(HID_T), INTENT(OUT) :: prop_id - END FUNCTION h5fget_create_plist_c - END INTERFACE - - hdferr = h5fget_create_plist_c(file_id, prop_id) - - END SUBROUTINE h5fget_create_plist_f -!****s* H5F/h5fget_access_plist_f -! -! NAME -! h5fget_access_plist_f -! -! PURPOSE -! Returns a file access property list identifier. -! -! INPUTS -! file_id - identifier of a file to creation property list of -! OUTPUTS -! access_id - access property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fget_access_plist_f(file_id, access_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER(HID_T), INTENT(OUT) :: access_id ! File access property - ! list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fget_access_plist_c(file_id, access_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_CREATE_PLIST_C':: h5fget_access_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER(HID_T), INTENT(OUT) :: access_id - END FUNCTION h5fget_access_plist_c - END INTERFACE - - hdferr = h5fget_access_plist_c(file_id, access_id) - - END SUBROUTINE h5fget_access_plist_f - -!****s* H5F/h5fis_hdf5_f -! -! NAME -! h5fis_hdf5_f -! -! PURPOSE -! Determines whether a file is in the HDF5 format. -! -! INPUTS -! name - name of the file to check -! OUTPUTS -! status - indicates if file is and HDF5 file -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fis_hdf5_f(name, status, hdferr) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the file - LOGICAL, INTENT(OUT) :: status ! Indicates if file - ! is an HDF5 file - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Length of the name character string - INTEGER :: flag ! "TRUE/FALSE" flag from C routine - ! to define status value. - - INTERFACE - INTEGER FUNCTION h5fis_hdf5_c(name, namelen, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FIS_HDF5_C':: h5fis_hdf5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER :: flag - END FUNCTION h5fis_hdf5_c - END INTERFACE - - namelen = LEN_TRIM(name) - hdferr = h5fis_hdf5_c(name, namelen, flag) - status = .TRUE. - IF (flag .EQ. 0) status = .FALSE. - - END SUBROUTINE h5fis_hdf5_f -!****s* H5F/h5fclose_f -! -! NAME -! h5fclose_f -! -! PURPOSE -! Closes HDF5 file. -! -! INPUTS -! file_id - file identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! SOURCE - SUBROUTINE h5fclose_f(file_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fclose_c(file_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FCLOSE_C':: h5fclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - END FUNCTION h5fclose_c - END INTERFACE - - hdferr = h5fclose_c(file_id) - - END SUBROUTINE h5fclose_f - -!****s* H5F/h5fget_obj_count_f -! -! NAME -! h5fget_obj_count_f -! -! PURPOSE -! Gets number of the objects open within a file -! -! INPUTS -! file_id - file identifier -! obj_type - type of the object; possible values are: -! H5F_OBJ_FILE_F -! H5F_OBJ_DATASET_F -! H5F_OBJ_GROUP_F -! H5F_OBJ_DATATYPE_F -! H5F_OBJ_ALL_F -! OUTPUTS -! obj_count - number of open objects -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! September 30, 2002 -! -! HISTORY -! Changed the type of obj_count to INTEGER(SIZE_T) -! September 25, 2008 EIP -! -! SOURCE - SUBROUTINE h5fget_obj_count_f(file_id, obj_type, obj_count, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER, INTENT(IN) :: obj_type ! Object type - INTEGER(SIZE_T), INTENT(OUT) :: obj_count - ! Number of open objects - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fget_obj_count_c(file_id, obj_type, obj_count) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_OBJ_COUNT_C':: h5fget_obj_count_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER, INTENT(IN) :: obj_type ! Object type - INTEGER(SIZE_T), INTENT(OUT) :: obj_count - ! Number of open objects - END FUNCTION h5fget_obj_count_c - END INTERFACE - - hdferr = h5fget_obj_count_c(file_id, obj_type, obj_count) - - END SUBROUTINE h5fget_obj_count_f - -!****s* H5F/h5fget_obj_ids_f -! -! NAME -! h5fget_obj_ids_f -! -! PURPOSE -! Get list of open objects identifiers within a file -! -! INPUTS -! file_id - file identifier -! obj_type - type of the object; possible values are: -! H5F_OBJ_FILE_F -! H5F_OBJ_DATASET_F -! H5F_OBJ_GROUP_F -! H5F_OBJ_DATATYPE_F -! H5F_OBJ_ALL_F -! OUTPUTS -! obj_ids - array of open object identifiers -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! num_objs - number of open objects -! -! AUTHOR -! Elena Pourmal -! September 30, 2002 -! -! HISTORY -! Added optional parameter num_objs for number of open objects -! of the specified type and changed type of max_obj to -! INTEGER(SIZE_T) -! September 25, 2008 EIP -! -! SOURCE - SUBROUTINE h5fget_obj_ids_f(file_id, obj_type, max_objs, obj_ids, hdferr, num_objs) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER, INTENT(IN) :: obj_type ! Object type - INTEGER(SIZE_T), INTENT(IN) :: max_objs ! Maximum # of objects to retrieve - INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids - ! Array of open objects iidentifiers - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: num_objs ! number of open objects -!***** - INTEGER(SIZE_T) :: c_num_objs ! Number of open objects of the specified type - - INTERFACE - INTEGER FUNCTION h5fget_obj_ids_c(file_id, obj_type, max_objs, obj_ids, c_num_objs) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_OBJ_IDS_C':: h5fget_obj_ids_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER, INTENT(IN) :: obj_type - INTEGER(SIZE_T), INTENT(IN) :: max_objs - INTEGER(HID_T), DIMENSION(*), INTENT(INOUT) :: obj_ids - INTEGER(SIZE_T), INTENT(OUT) :: c_num_objs - END FUNCTION h5fget_obj_ids_c - END INTERFACE - - hdferr = h5fget_obj_ids_c(file_id, obj_type, max_objs, obj_ids, c_num_objs) - IF (PRESENT(num_objs)) num_objs= c_num_objs - - END SUBROUTINE h5fget_obj_ids_f -!****s* H5F/h5fget_freespace_f -! -! NAME -! h5fget_freespace_f -! -! PURPOSE -! Get amount of free space within a file -! -! INPUTS -! file_id - file identifier -! OUTPUTS -! free_space - amount of free space in file -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Quincey Koziol -! October 7, 2003 -! -! SOURCE - SUBROUTINE h5fget_freespace_f(file_id, free_space, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier - INTEGER(HSSIZE_T), INTENT(OUT) :: free_space - ! amount of free space in file - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5fget_freespace_c(file_id, free_space) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_FREESPACE_C':: h5fget_freespace_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER(HSSIZE_T), INTENT(OUT) :: free_space - END FUNCTION h5fget_freespace_c - END INTERFACE - - hdferr = h5fget_freespace_c(file_id, free_space) - - END SUBROUTINE h5fget_freespace_f -!****s* H5F/h5fget_name_f -! -! NAME -! h5fget_name_f -! -! PURPOSE -! Gets the name of the file from the object identifier -! -! INPUTS -! obj_id - object identifier -! OUTPUTS -! buf - buffer to store the read name -! size - actual size of the name -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! July 6, 2004 -! -! SOURCE - SUBROUTINE h5fget_name_f(obj_id, buf, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - CHARACTER(LEN=*), INTENT(INOUT) :: buf - ! Buffer to hold file name - INTEGER(SIZE_T), INTENT(OUT) :: size ! Size of the file name - INTEGER, INTENT(OUT) :: hdferr ! Error code: 0 on success, - ! -1 if fail -!***** - INTEGER(SIZE_T) :: buflen - - INTERFACE - INTEGER FUNCTION h5fget_name_c(obj_id, size, buf, buflen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_NAME_C'::h5fget_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER(SIZE_T), INTENT(OUT) :: size - INTEGER(SIZE_T) :: buflen - CHARACTER(LEN=*), INTENT(OUT) :: buf - END FUNCTION h5fget_name_c - END INTERFACE - buflen = LEN_TRIM(buf) - hdferr = h5fget_name_c(obj_id, size, buf, buflen) - END SUBROUTINE h5fget_name_f -!****s* H5F/h5fget_filesize_f -! -! NAME -! h5fget_filesize_f -! -! PURPOSE -! Retrieves the file size of the HDF5 file. -! -! INPUTS -! file_id - file identifier -! OUTPUTS -! size - file size -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! July 7, 2004 -! -! SOURCE - SUBROUTINE h5fget_filesize_f(file_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: file_id ! file identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Size of the file - INTEGER, INTENT(OUT) :: hdferr ! Error code: 0 on success, - ! -1 if fail -!***** - INTERFACE - INTEGER FUNCTION h5fget_filesize_c(file_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5FGET_FILESIZE_C'::h5fget_filesize_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: file_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5fget_filesize_c - END INTERFACE - hdferr = h5fget_filesize_c(file_id, size) - END SUBROUTINE h5fget_filesize_f - - -END MODULE H5F diff --git a/fortran/src/H5Fff_F03.f90 b/fortran/src/H5Fff_F03.f90 deleted file mode 100644 index 8544870..0000000 --- a/fortran/src/H5Fff_F03.f90 +++ /dev/null @@ -1,99 +0,0 @@ -!****h* ROBODoc/H5F (F03) -! -! NAME -! H5F_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 2003 interfaces for H5F functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5T function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5F_PROVISIONAL - - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING - -CONTAINS -!****s* H5F (F03)/h5fget_file_image_f_F03 -! -! NAME -! h5fget_file_image_f -! -! PURPOSE -! Retrieves a copy of the image of an existing, open file. -! -! INPUTS -! file_id - Target file identifier. -! buf_ptr - Pointer to the buffer into which the image of the HDF5 file is to be copied. -! buf_len - Size of the supplied buffer. -! -! OUTPUTS -! hdferr - error code: -! 0 on success and -1 on failure -! OPTIONAL PARAMETERS -! buf_size - Returns the size in bytes of the buffer required to store the file image, -! no data will be copied. -! -! AUTHOR -! M. Scot Breitenfeld -! November 26, 2012 -! -! Fortran2003 Interface: - SUBROUTINE h5fget_file_image_f(file_id, buf_ptr, buf_len, hdferr, buf_size) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: file_id - TYPE(C_PTR) , INTENT(INOUT) :: buf_ptr - INTEGER(SIZE_T), INTENT(IN) :: buf_len - INTEGER , INTENT(OUT) :: hdferr - INTEGER(SIZE_T), INTENT(OUT) , OPTIONAL :: buf_size -!***** - - INTEGER(SIZE_T) :: buf_size_default - - INTERFACE - INTEGER FUNCTION h5fget_file_image_c(file_id, buf_ptr, buf_len, buf_size) BIND(C, NAME='h5fget_file_image_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR - USE H5GLOBAL - INTEGER(HID_T) , INTENT(IN) :: file_id - TYPE(C_PTR) , VALUE :: buf_ptr - INTEGER(SIZE_T), INTENT(IN) :: buf_len - INTEGER(SIZE_T), INTENT(IN) :: buf_size - END FUNCTION h5fget_file_image_c - END INTERFACE - - IF(PRESENT(buf_size))THEN - buf_ptr = C_NULL_PTR - ENDIF - - hdferr = h5fget_file_image_c(file_id, buf_ptr, buf_len, buf_size_default) - - IF(PRESENT(buf_size))THEN - buf_size = buf_size_default - ENDIF - - END SUBROUTINE h5fget_file_image_f - -END MODULE H5F_PROVISIONAL diff --git a/fortran/src/H5Fff_F90.f90 b/fortran/src/H5Fff_F90.f90 deleted file mode 100644 index b6e659b..0000000 --- a/fortran/src/H5Fff_F90.f90 +++ /dev/null @@ -1,43 +0,0 @@ -!****h* ROBODoc/H5F (F90) -! -! NAME -! H5F_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5F functions. It -! containsthe same functions as H5Fff_F03.f90, when applicable, -! but excludes the Fortran 2003 functions and the interface listings. -! This file will be compiled instead of H5Fff_F03.f90 if Fortran 2003 -! functions are not enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5F function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - - -MODULE H5F_PROVISIONAL - - USE H5GLOBAL - IMPLICIT NONE - -END MODULE H5F_PROVISIONAL diff --git a/fortran/src/H5Gf.c b/fortran/src/H5Gf.c index 7f755b3..b9c44bb 100644 --- a/fortran/src/H5Gf.c +++ b/fortran/src/H5Gf.c @@ -1,6 +1,6 @@ /****h* H5Gf/H5Gf * PURPOSE - * This file contains C stubs for H5G Fortran APIs + * This file contains C stubs for H5G Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -26,30 +26,29 @@ /****if* H5Gf/h5gcreate_c * NAME - * h5gcreate_c + * h5gcreate_c * PURPOSE - * Call H5Gcreate to create a group + * Call H5Gcreate to create a group * INPUTS - * loc_id - file or group identifier - * name - name of the group - * namelen - name length - * size_hint - length of names in the group + * loc_id - file or group identifier + * name - name of the group + * namelen - name length + * size_hint - length of names in the group * OUTPUTS - * grp_id - group identifier + * grp_id - group identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 5, 1999 + * Wednesday, August 5, 1999 * HISTORY - * - * Changed to call H5Gcreate2 because H5Gcreate flip-flops and - * H5Gcreate1 can be compiled out of the library - * QAK - 2007/08/23 + * Changed to call H5Gcreate2 because H5Gcreate flip-flops and + * H5Gcreate1 can be compiled out of the library + * QAK - 2007/08/23 * SOURCE */ int_f -nh5gcreate_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size_hint, +h5gcreate_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size_hint, hid_t_f *grp_id, hid_t_f *lcpl_id, hid_t_f *gcpl_id, hid_t_f *gapl_id ) /******/ { @@ -98,26 +97,26 @@ DONE: /****if* H5Gf/h5gopen_c * NAME - * h5gopen_c + * h5gopen_c * PURPOSE - * Call H5Gopen to open a dataset + * Call H5Gopen to open a dataset * INPUTS - * loc_id - file or group identifier - * name - name of the group - * namelen - name length - * gapl_id - Group access property list identifier + * loc_id - file or group identifier + * name - name of the group + * namelen - name length + * gapl_id - Group access property list identifier * OUTPUTS - * grp_id - group identifier + * grp_id - group identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 5, 1999 + * Wednesday, August 5, 1999 * * SOURCE */ int_f -nh5gopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *gapl_id, hid_t_f *grp_id) +h5gopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *gapl_id, hid_t_f *grp_id) /******/ { char *c_name = NULL; @@ -148,28 +147,28 @@ DONE: /****if* H5Gf/h5gget_obj_info_idx_c * NAME - * h5gget_obj_info_idx_c + * h5gget_obj_info_idx_c * PURPOSE - * Call H5Gget_obj_info to return name and the type of group - * member + * Call H5Gget_obj_info to return name and the type of group + * member * INPUTS - * loc_id - file or group identifier - * name - name of the group - * namelen - name length - * idx - index of the group member + * loc_id - file or group identifier + * name - name of the group + * namelen - name length + * idx - index of the group member * OUTPUTS - * obj_name - buffer to store member's name - * obj_namelen - length of the buffer - * obj_type - type of the object + * obj_name - buffer to store member's name + * obj_namelen - length of the buffer + * obj_type - type of the object * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 5, 1999 + * Wednesday, August 5, 1999 * SOURCE */ int_f -nh5gget_obj_info_idx_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *idx, +h5gget_obj_info_idx_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *idx, _fcd obj_name, int_f *obj_namelen, int_f *obj_type) /******/ { @@ -207,7 +206,7 @@ nh5gget_obj_info_idx_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *idx, goto DONE; /* XXX: Switch from using H5Gget_objtype_by_idx() means that this routine won't - * work on non-hard links - QAK + * work on non-hard links - QAK */ *obj_type = oinfo.type; @@ -231,24 +230,24 @@ DONE: /****if* H5Gf/h5gn_members_c * NAME - * h5gn_members_c + * h5gn_members_c * PURPOSE - * Call H5Gget_info_by_name to find number of objects in the group + * Call H5Gget_info_by_name to find number of objects in the group * INPUTS - * loc_id - file or group identifier - * name - name of the group - * namelen - name length + * loc_id - file or group identifier + * name - name of the group + * namelen - name length * OUTPUTS - * nmemebers - number of members + * nmemebers - number of members * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 5, 1999 + * Wednesday, August 5, 1999 * SOURCE */ int_f -nh5gn_members_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *nmembers) +h5gn_members_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *nmembers) /******/ { char *c_name = NULL; @@ -276,21 +275,21 @@ DONE: /****if* H5Gf/h5gclose_c * NAME - * h5gclose_c + * h5gclose_c * PURPOSE - * Call H5Gclose to close the group + * Call H5Gclose to close the group * INPUTS - * grp_id - identifier of the group to be closed + * grp_id - identifier of the group to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 5, 1999 + * Wednesday, August 5, 1999 * SOURCE */ int_f -nh5gclose_c(hid_t_f *grp_id) +h5gclose_c(hid_t_f *grp_id) /******/ { int ret_value = 0; @@ -303,19 +302,19 @@ nh5gclose_c(hid_t_f *grp_id) /****if* H5Gf/h5glink_c * NAME - * h5glink_c + * h5glink_c * PURPOSE - * Call H5Glink to link the specified type + * Call H5Glink to link the specified type * INPUTS - * loc_id - identifier of file or group - * link_type - link type - * current_name - name of the existing object for hard link, - * anything for the soft link - * current_namelen - current name lenghth - * new_name - new name for the object - * new_namelen - new_name lenghth + * loc_id - identifier of file or group + * link_type - link type + * current_name - name of the existing object for hard link, + * anything for the soft link + * current_namelen - current name lenghth + * new_name - new name for the object + * new_namelen - new_name lenghth * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen * Friday, August 6, 1999 @@ -323,7 +322,7 @@ nh5gclose_c(hid_t_f *grp_id) */ int_f -nh5glink_c(hid_t_f *loc_id, int_f *link_type, _fcd current_name, +h5glink_c(hid_t_f *loc_id, int_f *link_type, _fcd current_name, int_f *current_namelen, _fcd new_name, int_f *new_namelen) /******/ { @@ -385,32 +384,32 @@ DONE: /****if* H5Gf/h5glink2_c * NAME - * h5glink2_c + * h5glink2_c * PURPOSE - * Call H5Glink2 to link the specified type + * Call H5Glink2 to link the specified type * INPUTS - * cur_loc_id - identifier of file or group - * cur_name - name of the existing object for hard link releative - * to cur_loc_id location, - * anything for the soft link - * current_namelen - current name lenghth - * link_type - link type - * new_loc_id - location identifier - * new_name - new name for the object releative to the new_loc_id - * location - * new_namelen - new_name lenghth + * cur_loc_id - identifier of file or group + * cur_name - name of the existing object for hard link releative + * to cur_loc_id location, + * anything for the soft link + * current_namelen - current name lenghth + * link_type - link type + * new_loc_id - location identifier + * new_name - new name for the object releative to the new_loc_id + * location + * new_namelen - new_name lenghth * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, September 25, 2002 + * Wednesday, September 25, 2002 * HISTORY * * SOURCE */ int_f -nh5glink2_c(hid_t_f *cur_loc_id, _fcd cur_name, int_f *cur_namelen, +h5glink2_c(hid_t_f *cur_loc_id, _fcd cur_name, int_f *cur_namelen, int_f *link_type, hid_t_f *new_loc_id, _fcd new_name, int_f *new_namelen) /******/ { @@ -470,14 +469,14 @@ DONE: /****if* H5Gf/h5gunlink_c * NAME - * h5gunlink_c + * h5gunlink_c * PURPOSE - * Call H5Gunlink to remove the specified name + * Call H5Gunlink to remove the specified name * INPUTS - * loc_id - identifier of file or group - * name - name of the object to unlink + * loc_id - identifier of file or group + * name - name of the object to unlink * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen * Friday, August 6, 1999 @@ -485,7 +484,7 @@ DONE: */ int_f -nh5gunlink_c(hid_t_f *loc_id, _fcd name, int_f *namelen) +h5gunlink_c(hid_t_f *loc_id, _fcd name, int_f *namelen) /******/ { char *c_name = NULL; @@ -512,17 +511,17 @@ DONE: /****if* H5Gf/h5gmove_c * NAME - * h5gmove_c + * h5gmove_c * PURPOSE - * Call H5Gmove to rename an object within an HDF5 file + * Call H5Gmove to rename an object within an HDF5 file * INPUTS - * loc_id - identifier of file or group - * src_name - name of the original object - * src_namelen - original name lenghth - * dst_name - new name for the object - * dst_namelen - new name lenghth + * loc_id - identifier of file or group + * src_name - name of the original object + * src_namelen - original name lenghth + * dst_name - new name for the object + * dst_namelen - new name lenghth * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen * Friday, August 6, 1999 @@ -530,7 +529,7 @@ DONE: */ int_f -nh5gmove_c(hid_t_f *loc_id, _fcd src_name, int_f *src_namelen, _fcd dst_name, int_f*dst_namelen) +h5gmove_c(hid_t_f *loc_id, _fcd src_name, int_f *src_namelen, _fcd dst_name, int_f*dst_namelen) /******/ { char *c_src_name = NULL, *c_dst_name = NULL; @@ -562,18 +561,18 @@ DONE: /****if* H5Gf/h5gmove2_c * NAME - * h5gmove2_c + * h5gmove2_c * PURPOSE - * Call H5Gmove2 to rename an object within an HDF5 file + * Call H5Gmove2 to rename an object within an HDF5 file * INPUTS - * src_loc_id - identifier of file or group - * src_name - name of the original object relative to src_loc_id - * src_namelen - original name lenghth - * dst_loc_id - new location identifier - * dst_name - new name for the object relative to dst_loc_id - * dst_namelen - new name lenghth + * src_loc_id - identifier of file or group + * src_name - name of the original object relative to src_loc_id + * src_namelen - original name lenghth + * dst_loc_id - new location identifier + * dst_name - new name for the object relative to dst_loc_id + * dst_namelen - new name lenghth * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Wednesday, September 25, 2002 @@ -582,7 +581,7 @@ DONE: */ int_f -nh5gmove2_c(hid_t_f *src_loc_id, _fcd src_name, int_f *src_namelen, hid_t_f *dst_loc_id, _fcd dst_name, int_f*dst_namelen) +h5gmove2_c(hid_t_f *src_loc_id, _fcd src_name, int_f *src_namelen, hid_t_f *dst_loc_id, _fcd dst_name, int_f*dst_namelen) /******/ { char *c_src_name = NULL, *c_dst_name = NULL; @@ -614,18 +613,18 @@ DONE: /****if* H5Gf/h5gget_linkval_c * NAME - * h5gget_linkval_c + * h5gget_linkval_c * PURPOSE - * Call H5Gget_linkval to return the name of object + * Call H5Gget_linkval to return the name of object * INPUTS - * loc_id - identifier of file or group - * name - name of the object that symbolic link points to - * namelen - the name lenghth - * size - lenghth of retrurned value + * loc_id - identifier of file or group + * name - name of the object that symbolic link points to + * namelen - the name lenghth + * size - lenghth of retrurned value * OUTPUTS - * value - name to be returned + * value - name to be returned * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen * Friday, August 6, 1999 @@ -633,7 +632,7 @@ DONE: */ int_f -nh5gget_linkval_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size, +h5gget_linkval_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size, _fcd value) /******/ { @@ -678,26 +677,26 @@ DONE: /****if* H5Gf/h5gset_comment_c * NAME - * h5gset_comment_c + * h5gset_comment_c * PURPOSE - * Call H5Oset_comment_by_name to set comments for the specified object + * Call H5Oset_comment_by_name to set comments for the specified object * INPUTS - * loc_id - identifier of file or group - * name - name of object whose comment is to be set or reset - * namelen - the name lenghth - * comment - the new comment - * commentlen - new comment lenghth + * loc_id - identifier of file or group + * name - name of object whose comment is to be set or reset + * namelen - the name lenghth + * comment - the new comment + * commentlen - new comment lenghth * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen - * Friday, August 6, 1999 + * Friday, August 6, 1999 * HISTORY - * Elena Pourmal + * Elena Pourmal * SOURCE */ int_f -nh5gset_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, _fcd comment, +h5gset_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, _fcd comment, int_f *commentlen) /******/ { @@ -729,24 +728,24 @@ DONE: /****if* H5Gf/h5gget_comment_c * NAME - * h5gget_comment_c + * h5gget_comment_c * PURPOSE - * Call H5Oget_comment_by_name to retrieve comments for the specified object + * Call H5Oget_comment_by_name to retrieve comments for the specified object * INPUTS - * loc_id - identifier of file or group - * name - name of object whose comment is to be set or reset - * namelen - the name lenghth - * bufsize - at most bufsize characters - * comment - the new comment + * loc_id - identifier of file or group + * name - name of object whose comment is to be set or reset + * namelen - the name lenghth + * bufsize - at most bufsize characters + * comment - the new comment * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Mingshi Chen - * Friday, August 6, 1999 + * Friday, August 6, 1999 * SOURCE */ int_f -nh5gget_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *bufsize, +h5gget_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *bufsize, _fcd comment) /******/ { @@ -791,26 +790,26 @@ DONE: /****if* H5Gf/h5gcreate_anon_c * NAME - * h5gcreate_anon_c + * h5gcreate_anon_c * PURPOSE - * Call H5Gcreate_anon + * Call H5Gcreate_anon * INPUTS * - * loc_id - Location identifier - * gcpl_id - Group creation property list identifier - * gapl_id - Group access property list identifier + * loc_id - Location identifier + * gcpl_id - Group creation property list identifier + * gapl_id - Group access property list identifier * * OUTPUTS - * grp_id - group identifier + * grp_id - group identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * February 15, 2008 * SOURCE */ int_f -nh5gcreate_anon_c(hid_t_f *loc_id, hid_t_f *gcpl_id, hid_t_f *gapl_id, hid_t_f *grp_id) +h5gcreate_anon_c(hid_t_f *loc_id, hid_t_f *gcpl_id, hid_t_f *gapl_id, hid_t_f *grp_id) /******/ { @@ -825,24 +824,24 @@ done: /****if* H5Gf/h5gget_create_plist_c * NAME - * h5gget_create_plist_c + * h5gget_create_plist_c * PURPOSE - * Call H5Gget_create_plist + * Call H5Gget_create_plist * INPUTS * - * grp_id - group identifier + * grp_id - group identifier * * OUTPUTS - * gcpl_id - Group creation property list identifier + * gcpl_id - Group creation property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * February 15, 2008 * SOURCE */ int_f -nh5gget_create_plist_c(hid_t_f *grp_id, hid_t_f *gcpl_id ) +h5gget_create_plist_c(hid_t_f *grp_id, hid_t_f *gcpl_id ) /******/ { int_f ret_value=0; /* Return value */ @@ -857,36 +856,36 @@ done: /****if* H5Gf/h5gget_info_c * NAME - * h5gget_info_c + * h5gget_info_c * PURPOSE - * Call H5Gget_info + * Call H5Gget_info * INPUTS - * group_id - Group identifier + * group_id - Group identifier * OUTPUTS * - * storage_type - Type of storage for links in group: + * storage_type - Type of storage for links in group: * H5G_STORAGE_TYPE_COMPACT: Compact storage * H5G_STORAGE_TYPE_DENSE: Indexed storage * H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure * - * nlinks - Number of links in group - * max_corder - Current maximum creation order value for group - * mounted - Whether group has a file mounted on it (0 = false, 1 = true) + * nlinks - Number of links in group + * max_corder - Current maximum creation order value for group + * mounted - Whether group has a file mounted on it (0 = false, 1 = true) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 15, 2008 + * February 15, 2008 * HISTORY * - * - Added 'mounted' paramater - * M. Scot Breitenfeld - * July 16, 2008 + * - Added 'mounted' paramater + * M. Scot Breitenfeld + * July 16, 2008 * SOURCE */ int_f -nh5gget_info_c (hid_t_f *group_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted ) +h5gget_info_c (hid_t_f *group_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted ) /******/ { @@ -914,43 +913,43 @@ done: /****if* H5Gf/h5gget_info_by_idx_c * NAME - * h5gget_info_by_idx_c + * h5gget_info_by_idx_c * PURPOSE - * Call H5Gget_info_by_idx + * Call H5Gget_info_by_idx * INPUTS * - * loc_id - File or group identifier - * group_name - Name of group containing group for which information is to be retrieved - * group_namelen - name length - * index_type - Index type - * order - Order of the count in the index - * n - Position in the index of the group for which information is retrieved - * lapl_id - Link access property list + * loc_id - File or group identifier + * group_name - Name of group containing group for which information is to be retrieved + * group_namelen - name length + * index_type - Index type + * order - Order of the count in the index + * n - Position in the index of the group for which information is retrieved + * lapl_id - Link access property list * OUTPUTS * - * storage_type - Type of storage for links in group: + * storage_type - Type of storage for links in group: * H5G_STORAGE_TYPE_COMPACT: Compact storage * H5G_STORAGE_TYPE_DENSE: Indexed storage * H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure * - * nlinks - Number of links in group - * max_corder - Current maximum creation order value for group - * mounted - Whether group has a file mounted on it (0 = false, 1 = true) + * nlinks - Number of links in group + * max_corder - Current maximum creation order value for group + * mounted - Whether group has a file mounted on it (0 = false, 1 = true) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 18, 2008 + * February 18, 2008 * HISTORY * - * - Added 'mounted' paramater - * M. Scot Breitenfeld - * July 16, 2008 + * - Added 'mounted' parameter + * M. Scot Breitenfeld + * July 16, 2008 * SOURCE */ int_f -nh5gget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +h5gget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted ) /******/ @@ -987,40 +986,40 @@ nh5gget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, /****if* H5Gf/h5gget_info_by_name_c * NAME - * h5gget_info_by_name_c + * h5gget_info_by_name_c * PURPOSE - * Call H5Gget_info_by_name + * Call H5Gget_info_by_name * INPUTS * - * loc_id - File or group identifier - * group_name - Name of group containing group for which information is to be retrieved - * group_namelen - name length - * lapl_id - Link access property list + * loc_id - File or group identifier + * group_name - Name of group containing group for which information is to be retrieved + * group_namelen - name length + * lapl_id - Link access property list * OUTPUTS * - * storage_type - Type of storage for links in group: + * storage_type - Type of storage for links in group: * H5G_STORAGE_TYPE_COMPACT: Compact storage * H5G_STORAGE_TYPE_DENSE: Indexed storage * H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure * - * nlinks - Number of links in group - * max_corder - Current maximum creation order value for group - * mounted - Whether group has a file mounted on it (0 = false, 1 = true) + * nlinks - Number of links in group + * max_corder - Current maximum creation order value for group + * mounted - Whether group has a file mounted on it (0 = false, 1 = true) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 18, 2008 + * February 18, 2008 * HISTORY * - * - Added 'mounted' paramater - * M. Scot Breitenfeld - * July 16, 2008 + * - Added 'mounted' paramater + * M. Scot Breitenfeld + * July 16, 2008 * SOURCE */ int_f -nh5gget_info_by_name_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, hid_t_f *lapl_id, +h5gget_info_by_name_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, hid_t_f *lapl_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted) /******/ { diff --git a/fortran/src/H5Gff.F90 b/fortran/src/H5Gff.F90 new file mode 100644 index 0000000..2e002b5 --- /dev/null +++ b/fortran/src/H5Gff.F90 @@ -0,0 +1,1272 @@ +!****h* ROBODoc/H5G +! +! NAME +! MODULE H5G +! +! FILE +! fortran/src/H5Gff.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5G functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5G function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5G + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_CHAR + USE H5GLOBAL + +CONTAINS + +!****s* H5G/h5gcreate_f +! +! NAME +! h5gcreate_f +! +! PURPOSE +! Creates a new group. +! +! INPUTS +! loc_id - location identifier +! name - group name at the specified location +! OUTPUTS +! grp_id - group identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! size_hint - a parameter indicating the number of bytes to +! reserve for the names that will appear in the group +! lcpl_id - Property list for link creation +! gcpl_id - Property list for group creation +! gapl_id - Property list for group access +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! Added additional optional paramaters in 1.8 +! MSB - February 27, 2008 +! +! SOURCE + SUBROUTINE h5gcreate_f(loc_id, name, grp_id, hdferr, size_hint, lcpl_id, gcpl_id, gapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group + INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(SIZE_T), OPTIONAL, INTENT(IN) :: size_hint + ! Parameter indicating + ! the number of bytes + ! to reserve for the + ! names that will appear + ! in the group. Set to OBJECT_NAMELEN_DEFAULT_F + ! if using any of the optional + ! parameters lcpl_id, gcpl_id, and/or gapl_id when not + ! using keywords in specifying the optional parameters + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Property list for link creation + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access +!***** + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: gcpl_id_default + INTEGER(HID_T) :: gapl_id_default + + INTEGER :: namelen ! Length of the name character string + INTEGER(SIZE_T) :: size_hint_default + + INTERFACE + INTEGER FUNCTION h5gcreate_c(loc_id, name, namelen, & + size_hint_default, grp_id, lcpl_id_default, gcpl_id_default, gapl_id_default) & + BIND(C,NAME='h5gcreate_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(SIZE_T) :: size_hint_default + INTEGER(HID_T), INTENT(OUT) :: grp_id + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: gcpl_id_default + INTEGER(HID_T) :: gapl_id_default + END FUNCTION h5gcreate_c + END INTERFACE + + size_hint_default = OBJECT_NAMELEN_DEFAULT_F + IF (PRESENT(size_hint)) size_hint_default = size_hint + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + gcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id + gapl_id_default = H5P_DEFAULT_F + IF(PRESENT(gapl_id)) gapl_id_default = gapl_id + + namelen = LEN(name) + + hdferr = h5gcreate_c(loc_id, name, namelen, size_hint_default, grp_id, & + lcpl_id_default, gcpl_id_default, gapl_id_default) + + END SUBROUTINE h5gcreate_f + +!!$! +!!$!****s* H5G/ +!!$! +!!$! NAME +!!$! h5gcreate2_f +!!$! +!!$! PURPOSE +!!$! Creates a new group. +!!$! +!!$! INPUTS +!!$! loc_id - location identifier +!!$! name - group name at the specified location +!!$! OUTPUTS +!!$! grp_id - group identifier +!!$! hdferr: - error code +!!$! Success: 0 +!!$! Failure: -1 +!!$! OPTIONAL PARAMETERS +!!$! +!!$! lcpl_id - Property list for link creation +!!$! gcpl_id - Property list for group creation +!!$! gapl_id - Property list for group access +!!$! +!!$! AUTHOR M. Scot Breitenfeld +!!$! February 27, 2008 +!!$! +!!$! HISTORY +!!$! +!!$! NOTES Needed to switch the first 2 arguments to avoid conflect +!!$! with h5gcreate1_f +!!$! +!!$ +!!$ SUBROUTINE h5gcreate2_f(name, loc_id, grp_id, hdferr, & +!!$ lcpl_id, gcpl_id, gapl_id) +!!$ IMPLICIT NONE +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name ! Name of the group +!!$ INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier +!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code +!!$ INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier +!!$ +!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Property list for link creation +!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation +!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access +!!$ +!!$ INTEGER(HID_T) :: lcpl_id_default +!!$ INTEGER(HID_T) :: gcpl_id_default +!!$ INTEGER(HID_T) :: gapl_id_default +!!$ +!!$ INTEGER(SIZE_T) :: OBJECT_NAME +! LEN_DEFAULT ! Dummy argument to pass to c call +!!$ INTEGER :: namelen ! Length of the name character string +!!$ +!!$! MS FORTRAN needs explicit interface for C functions called here. +!!$! +!!$ INTERFACE +!!$ INTEGER FUNCTION h5gcreate_c(loc_id, name, namelen, & +!!$ OBJECT_NAME +! LEN_DEFAULT, grp_id, lcpl_id_default, gcpl_id_default, gapl_id_default) +!!$ USE H5GLOBAL +!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) +!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GCREATE_C'::h5gcreate_c +!!$ !DEC$ENDIF +!!$ !DEC$ATTRIBUTES reference :: name +!!$ INTEGER(HID_T), INTENT(IN) :: loc_id +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name +!!$ INTEGER :: namelen +!!$ INTEGER(SIZE_T) :: OBJECT_NAME +! LEN_DEFAULT +!!$ INTEGER(HID_T) :: lcpl_id_default +!!$ INTEGER(HID_T) :: gcpl_id_default +!!$ INTEGER(HID_T) :: gapl_id_default +!!$ INTEGER(HID_T), INTENT(OUT) :: grp_id +!!$ END FUNCTION h5gcreate_c +!!$ END INTERFACE +!!$ +!!$ namelen = LEN(name) +!!$ OBJECT_NAME +! LEN_DEFAULT = OBJECT_NAME +! LEN_DEFAULT_F +!!$ +!!$ lcpl_id_default = H5P_DEFAULT_F +!!$ IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id +!!$ gcpl_id_default = H5P_DEFAULT_F +!!$ IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id +!!$ gapl_id_default = H5P_DEFAULT_F +!!$ IF(PRESENT(gapl_id)) gapl_id_default = gapl_id +!!$ +!!$ +!!$ hdferr = h5gcreate_c(loc_id, name, namelen, OBJECT_NAME +! LEN_DEFAULT, grp_id, & +!!$ lcpl_id_default, gcpl_id_default, gapl_id_default) +!!$ +!!$ END SUBROUTINE h5gcreate2_f + +! +!****s* H5G/h5gopen_f +! +! NAME +! h5gopen_f +! +! PURPOSE +! Opens an existing group. +! +! INPUTS +! loc_id - location identifier +! name - name of the group to open +! OUTPUTS +! grp_id - group identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! gapl_id - Group access property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! Added 1.8 (optional) parameter gapl_id +! February, 2008 M. Scot Breitenfeld +! +! SOURCE + SUBROUTINE h5gopen_f(loc_id, name, grp_id, hdferr, gapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group + INTEGER(HID_T), INTENT(OUT) :: grp_id ! File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Group access property list identifier +!***** + INTEGER(HID_T) :: gapl_id_default + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5gopen_c(loc_id, name, namelen, gapl_id_default, grp_id) & + BIND(C,NAME='h5gopen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(IN) :: gapl_id_default + INTEGER(HID_T), INTENT(OUT) :: grp_id + END FUNCTION h5gopen_c + END INTERFACE + + gapl_id_default = H5P_DEFAULT_F + IF(PRESENT(gapl_id)) gapl_id_default = gapl_id + + namelen = LEN(name) + hdferr = h5gopen_c(loc_id, name, namelen, gapl_id_default, grp_id) + + END SUBROUTINE h5gopen_f +! +!****s* H5G/h5gclose_f +! +! NAME +! h5gclose_f +! +! PURPOSE +! Closes the specified group. +! +! INPUTS +! grp_id - group identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gclose_f(grp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: grp_id ! Group identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5gclose_c(grp_id) BIND(C,NAME='h5gclose_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: grp_id + END FUNCTION h5gclose_c + END INTERFACE + + hdferr = h5gclose_c(grp_id) + + END SUBROUTINE h5gclose_f +! +!****s* H5G/h5gget_obj_info_idx_f +! +! NAME +! h5gget_obj_info_idx_f +! +! PURPOSE +! Returns name and type of the group member identified by +! its index. +! +! INPUTS +! loc_id - location identifier +! name - name of the group at the specified location +! idx - object index (zero-based) +! OUTPUTS +! obj_name - object name +! obj_type - object type +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gget_obj_info_idx_f(loc_id, name, idx, & + obj_name, obj_type, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group + INTEGER, INTENT(IN) :: idx ! Index of member object + CHARACTER(LEN=*), INTENT(OUT) :: obj_name ! Name of the object + INTEGER, INTENT(OUT) :: obj_type ! Object type + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Length of the name character string + INTEGER :: obj_namelen ! Length of the obj_name character string + + INTERFACE + INTEGER FUNCTION h5gget_obj_info_idx_c(loc_id, name, & + namelen, idx, & + obj_name, obj_namelen, obj_type) BIND(C,NAME='h5gget_obj_info_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER, INTENT(IN) :: idx + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: obj_name + INTEGER :: obj_namelen + INTEGER, INTENT(OUT) :: obj_type + END FUNCTION h5gget_obj_info_idx_c + END INTERFACE + + namelen = LEN(name) + obj_namelen = LEN(obj_name) + hdferr = h5gget_obj_info_idx_c(loc_id, name, namelen, idx, & + obj_name, obj_namelen, obj_type) + END SUBROUTINE h5gget_obj_info_idx_f + +! +!****s* H5G/h5gn_members_f +! +! NAME +! h5gn_members_f +! +! PURPOSE +! Returns the number of group members. +! +! INPUTS +! loc_id - location identifier +! name - name of the group at the specified location +! OUTPUTS +! nmembers - number of group members +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gn_members_f(loc_id, name, nmembers, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group + INTEGER, INTENT(OUT) :: nmembers ! Number of members in the + ! group + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Length of the name character string + + INTERFACE + INTEGER FUNCTION h5gn_members_c(loc_id, name, namelen, nmembers) & + BIND(C,NAME='h5gn_members_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER, INTENT(OUT) :: nmembers + END FUNCTION h5gn_members_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5gn_members_c(loc_id, name, namelen, nmembers) + + END SUBROUTINE h5gn_members_f +! +!****s* H5G/h5glink_f +! +! NAME +! h5glink_f +! +! PURPOSE +! Creates a link of the specified type from new_name +! to current_name. +! +! INPUTS +! loc_id - location identifier +! link_type - link type; possible values are: +! H5G_LINK_HARD_F (0) +! H5G_LINK_SOFT_F (1) +! current_name - name of the existing object if link is a +! hard link. Can be anything for the soft link +! new_name - new name for the object +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5glink_f(loc_id, link_type, current_name, & + new_name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + INTEGER, INTENT(IN) :: link_type ! link type + ! Possible values are: + ! H5G_LINK_HARD_F (0) or + ! H5G_LINK_SOFT_F (1) + + CHARACTER(LEN=*), INTENT(IN) :: current_name + ! Current name of an object + CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + INTEGER :: current_namelen ! Lenghth of the current_name string + INTEGER :: new_namelen ! Lenghth of the new_name string + + INTERFACE + INTEGER FUNCTION h5glink_c(loc_id, link_type, current_name, & + current_namelen, new_name, new_namelen) & + BIND(C,NAME='h5glink_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER, INTENT(IN) :: link_type + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: current_name + INTEGER :: current_namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_name + INTEGER :: new_namelen + END FUNCTION h5glink_c + END INTERFACE + + current_namelen = LEN(current_name) + new_namelen = LEN(new_name) + hdferr = h5glink_c(loc_id, link_type, current_name, & + current_namelen, new_name, new_namelen) + END SUBROUTINE h5glink_f + +! +!****s* H5G/h5glink2_f +! +! NAME +! h5glink2_f +! +! PURPOSE +! Creates a link of the specified type from new_name +! to current_name. current_name and new_name are interpreted +! releative to current and new location identifiers. +! +! INPUTS +! cur_loc_id - location identifier +! cur_name - name of the existing object if link is a +! hard link. Can be anything for the soft link. +! link_type - link type; possible values are: +! H5G_LINK_HARD_F (0) +! H5G_LINK_SOFT_F (1) +! new_loc_id - new location identifier +! new_name - new name for the object +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 25, 2002 +! +! SOURCE + SUBROUTINE h5glink2_f(cur_loc_id, cur_name, link_type, new_loc_id, & + new_name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: cur_loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: cur_name + ! Current name of an object + INTEGER, INTENT(IN) :: link_type ! link type + ! Possible values are: + ! H5G_LINK_HARD_F (0) or + ! H5G_LINK_SOFT_F (1) + + INTEGER(HID_T), INTENT(IN) :: new_loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + INTEGER :: cur_namelen ! Lenghth of the current_name string + INTEGER :: new_namelen ! Lenghth of the new_name string + + INTERFACE + INTEGER FUNCTION h5glink2_c(cur_loc_id, cur_name, cur_namelen, & + link_type, new_loc_id, & + new_name, new_namelen) BIND(C,NAME='h5glink2_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: cur_loc_id + INTEGER(HID_T), INTENT(IN) :: new_loc_id + INTEGER, INTENT(IN) :: link_type + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: cur_name + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_name + INTEGER :: cur_namelen + INTEGER :: new_namelen + END FUNCTION h5glink2_c + END INTERFACE + + cur_namelen = LEN(cur_name) + new_namelen = LEN(new_name) + hdferr = h5glink2_c(cur_loc_id, cur_name, cur_namelen, link_type, & + new_loc_id, new_name, new_namelen) + END SUBROUTINE h5glink2_f + +! +!****s* H5G/h5gunlink_f +! +! NAME +! h5gunlink_f +! +! PURPOSE +! Removes the specified name from the group graph and +! decrements the link count for the object to which name +! points +! +! INPUTS +! loc_id - location identifier +! name - name of the object to unlink +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gunlink_f(loc_id, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Lenghth of the name character string + + INTERFACE + INTEGER FUNCTION h5gunlink_c(loc_id, name, namelen) BIND(C,NAME='h5gunlink_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + END FUNCTION h5gunlink_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5gunlink_c(loc_id, name, namelen) + END SUBROUTINE h5gunlink_f + +! +!****s* H5G/h5gmove_f +! +! NAME +! h5gmove_f +! +! PURPOSE +! Renames an object within an HDF5 file. +! +! INPUTS +! loc_id - location identifier +! name - object's name at specified location +! new_name - object's new name +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gmove_f(loc_id, name, new_name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object + CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Lenghth of the current_name string + INTEGER :: new_namelen ! Lenghth of the new_name string + + INTERFACE + INTEGER FUNCTION h5gmove_c(loc_id, name, namelen, new_name, new_namelen) BIND(C,NAME='h5gmove_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_name + INTEGER :: new_namelen + END FUNCTION h5gmove_c + END INTERFACE + + namelen = LEN(name) + new_namelen = LEN(new_name) + hdferr = h5gmove_c(loc_id, name, namelen, new_name, new_namelen) + END SUBROUTINE h5gmove_f +! +!****s* H5G/h5gmove2_f +! +! NAME +! h5gmove2_f +! +! PURPOSE +! Renames an object within an HDF5 file. +! +! INPUTS +! src_loc_id - original location identifier +! src_name - object's name at specified original location +! dst_loc_id - original location identifier +! dst_name - object's new name +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! September 25, 2002 +! +! SOURCE + SUBROUTINE h5gmove2_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: src_name ! Original name of an object + INTEGER(HID_T), INTENT(IN) :: dst_loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: dst_name ! New name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: src_namelen ! Length of the current_name string + INTEGER :: dst_namelen ! Lenghth of the new_name string + + INTERFACE + INTEGER FUNCTION h5gmove2_c(src_loc_id, src_name, src_namelen, & + dst_loc_id, dst_name, dst_namelen) BIND(C,NAME='h5gmove2_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: src_loc_id + INTEGER(HID_T), INTENT(IN) :: dst_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: src_name + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: dst_name + INTEGER :: src_namelen + INTEGER :: dst_namelen + END FUNCTION h5gmove2_c + END INTERFACE + + src_namelen = LEN(src_name) + dst_namelen = LEN(dst_name) + hdferr = h5gmove2_c(src_loc_id, src_name, src_namelen, dst_loc_id, dst_name, dst_namelen) + END SUBROUTINE h5gmove2_f +! +!****s* H5G/h5gget_linkval_f +! +! NAME +! h5gget_linkval_f +! +! PURPOSE +! Returns the name of the object that the symbolic link +! points to. +! +! INPUTS +! loc_id - location identifier +! name - symbolic link to the object whose name +! is to be returned. +! size - maximum number of characters to be returned +! OUTPUTS +! buffer - a buffer to hold the name of the object +! being sought +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gget_linkval_f(loc_id, name, size, buffer, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object + INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of buffer + CHARACTER(LEN=size), INTENT(OUT) :: buffer + ! Buffer to hold a name of + ! the object symbolic link + ! points to + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Lenghth of the current_name string + + INTERFACE + INTEGER FUNCTION h5gget_linkval_c(loc_id, name, namelen, size, buffer) BIND(C,NAME='h5gget_linkval_c') + IMPORT :: C_CHAR, SIZE_T + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(SIZE_T), INTENT(IN) :: size + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buffer + END FUNCTION h5gget_linkval_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5gget_linkval_c(loc_id, name, namelen, size, buffer) + END SUBROUTINE h5gget_linkval_f + +! +!****s* H5G/h5gset_comment_f +! +! NAME +! h5gset_comment_f +! +! PURPOSE +! Sets comment for specified object. +! +! INPUTS +! loc_id - location identifier +! name - name of the object +! comment - comment to set for the object +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gset_comment_f(loc_id, name, comment, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object + CHARACTER(LEN=*), INTENT(IN) :: comment ! New name of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Lenghth of the current_name string + INTEGER :: commentlen ! Lenghth of the comment string + + INTERFACE + INTEGER FUNCTION h5gset_comment_c(loc_id, name, namelen, & + comment, commentlen) BIND(C,NAME='h5gset_comment_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: comment + INTEGER :: commentlen + END FUNCTION h5gset_comment_c + END INTERFACE + + namelen = LEN(name) + commentlen = LEN(comment) + hdferr = h5gset_comment_c(loc_id, name, namelen, comment, commentlen) + END SUBROUTINE h5gset_comment_f +! +!****s* H5G/h5gget_comment_f +! +! NAME +! h5gget_comment_f +! +! PURPOSE +! Retrieves comment for specified object. +! +! INPUTS +! loc_id - location identifier +! name - name of the object at specified location +! size - size of the buffer required to hold comment +! OUTPUTS +! buffer - buffer to hold object's comment +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5gget_comment_f(loc_id, name, size, buffer, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object + INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of buffer + CHARACTER(LEN=size), INTENT(OUT) :: buffer + ! Buffer to hold a comment + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Length of the current_name string + + INTERFACE + INTEGER FUNCTION h5gget_comment_c(loc_id, name, namelen, size, buffer) BIND(C,NAME='h5gget_comment_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(SIZE_T), INTENT(IN) :: size + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buffer + END FUNCTION h5gget_comment_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5gget_comment_c(loc_id, name, namelen, size, buffer) + + END SUBROUTINE h5gget_comment_f +! +!****s* H5G/H5Gcreate_anon_f +! +! NAME +! H5Gcreate_anon_f +! +! PURPOSE +! Creates a new empty group without linking it into the file structure. +! +! INPUTS +! loc_id - Location identifier +! OUTPUTS +! grp_id - group identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! gcpl_id - Group creation property list identifier +! gapl_id - Group access property list identifier +! +! AUTHOR +! M. Scot Breitenfeld +! February 15, 2008 +! +! SOURCE + SUBROUTINE h5Gcreate_anon_f(loc_id, grp_id, hdferr, gcpl_id, gapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access +!***** + INTEGER(HID_T) :: gcpl_id_default + INTEGER(HID_T) :: gapl_id_default + + INTERFACE + INTEGER FUNCTION h5gcreate_anon_c(loc_id, gcpl_id_default, gapl_id_default, grp_id) & + BIND(C,NAME='h5gcreate_anon_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + INTEGER(HID_T), INTENT(IN) :: gcpl_id_default ! Property list for group creation + INTEGER(HID_T), INTENT(IN) :: gapl_id_default ! Property list for group access + INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier + END FUNCTION h5gcreate_anon_c + END INTERFACE + + gcpl_id_default = H5P_DEFAULT_F + gapl_id_default = H5P_DEFAULT_F + + IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id + IF(PRESENT(gapl_id)) gapl_id_default = gapl_id + + hdferr = h5gcreate_anon_c(loc_id, gcpl_id_default, gapl_id_default, grp_id) + + END SUBROUTINE h5Gcreate_anon_f +! +!****s* H5G/H5Gget_create_plist_f +! +! NAME +! H5Gget_create_plist_f +! +! PURPOSE +! Gets a group creation property list identifier. +! +! INPUTS +! grp_id - group identifier +! OUTPUTS +! gcpl_id - Group creation property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! February 15, 2008 +! +! SOURCE + SUBROUTINE h5gget_create_plist_f(grp_id, gcpl_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: grp_id ! Group identifier + INTEGER(HID_T), INTENT(OUT) :: gcpl_id ! Property list for group creation + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5gget_create_plist_c(grp_id, gcpl_id ) BIND(C,NAME='h5gget_create_plist_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: grp_id + INTEGER(HID_T), INTENT(OUT) :: gcpl_id + END FUNCTION h5gget_create_plist_c + END INTERFACE + + hdferr = h5gget_create_plist_c(grp_id, gcpl_id ) + + END SUBROUTINE h5gget_create_plist_f + +! +!****s* H5G/h5gget_info_f +! +! NAME +! h5gget_info_f +! +! PURPOSE +! Retrieves information about a group +! +! INPUTS +! group_id - Group identifier +! +! OUTPUTS +! storage_type - Type of storage for links in group +! H5G_STORAGE_TYPE_COMPACT: Compact storage +! H5G_STORAGE_TYPE_DENSE: Indexed storage +! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure +! nlinks - Number of links in group +! max_corder - Current maximum creation order value for group +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! mounted - Whether group has a file mounted on it +! +! AUTHOR +! M. Scot Breitenfeld +! February 15, 2008 +! +! NOTES +! In C the output is defined as a structure: H5G_info_t +! +! HISTORY +! +! - Added 'mounted' paramater +! M. Scot Breitenfeld +! July 16, 2008 +! +! SOURCE + SUBROUTINE h5gget_info_f(group_id, storage_type, nlinks, max_corder, hdferr, mounted) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: group_id ! Group identifier + + INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: + ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage + ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage + ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure + INTEGER, INTENT(OUT) :: nlinks ! Number of links in group + INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it +!***** + INTEGER :: mounted_c + + INTERFACE + INTEGER FUNCTION h5gget_info_c(group_id, storage_type, nlinks, max_corder, mounted_c) & + BIND(C,NAME='h5gget_info_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: group_id + INTEGER, INTENT(OUT) :: storage_type + INTEGER, INTENT(OUT) :: nlinks + INTEGER, INTENT(OUT) :: max_corder + INTEGER :: mounted_c + END FUNCTION h5gget_info_c + END INTERFACE + + hdferr = h5gget_info_c(group_id, storage_type, nlinks, max_corder, mounted_c) + + IF(PRESENT(mounted))THEN + IF(mounted_c.EQ.0) THEN + mounted = .FALSE. + ELSE + mounted = .TRUE. + ENDIF + ENDIF + + END SUBROUTINE h5gget_info_f +! +!****s* H5G/h5gget_info_by_idx_f +! +! NAME +! h5gget_info_by_idx_f +! +! PURPOSE +! Retrieves information about a group, according to the group’s position within an index. +! +! INPUTS +! loc_id - File or group identifier +! group_name - Name of group containing group for which information is to be retrieved +! index_type - Index type +! order - Order of the count in the index +! n - Position in the index of the group for which information is retrieved +! +! OUTPUTS +! storage_type - Type of storage for links in group +! H5G_STORAGE_TYPE_COMPACT: Compact storage +! H5G_STORAGE_TYPE_DENSE: Indexed storage +! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure +! nlinks - Number of links in group +! max_corder - Current maximum creation order value for group +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! mounted - Whether group has a file mounted on it +! +! NOTES +! In C the output is defined as a structure: H5G_info_t +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! HISTORY +! Added 'mounted' paramater +! M. Scot Breitenfeld +! July 16, 2008 +! +! SOURCE + SUBROUTINE h5gget_info_by_idx_f(loc_id, group_name, index_type, order, n, & + storage_type, nlinks, max_corder, hdferr, lapl_id, mounted) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved + INTEGER, INTENT(IN) :: index_type ! Index type + INTEGER, INTENT(IN) :: order ! Order of the count in the index + INTEGER(HSIZE_T), INTENT(IN) :: n ! Position in the index of the group for which information is retrieved + + INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: + ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage + ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage + ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure + INTEGER, INTENT(OUT) :: nlinks ! Number of links in group + INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list + LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it +!***** + INTEGER :: mounted_c + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: group_name_len ! length of group name + + INTERFACE + INTEGER FUNCTION h5gget_info_by_idx_c(loc_id, group_name, group_name_len, index_type, order, n, lapl_id_default, & + storage_type, nlinks, max_corder, mounted_c) BIND(C,NAME='h5gget_info_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER, INTENT(IN) :: index_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) :: lapl_id_default + INTEGER, INTENT(OUT) :: storage_type + INTEGER, INTENT(OUT) :: nlinks + INTEGER, INTENT(OUT) :: max_corder + + INTEGER(SIZE_T) :: group_name_len + INTEGER :: mounted_c + + END FUNCTION h5gget_info_by_idx_c + END INTERFACE + + group_name_len = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5gget_info_by_idx_c(loc_id, group_name, group_name_len, & + index_type, order, n, lapl_id_default, & + storage_type, nlinks, max_corder, mounted_c) + + IF(PRESENT(mounted))THEN + IF(mounted_c.EQ.0) THEN + mounted = .FALSE. + ELSE + mounted = .TRUE. + ENDIF + ENDIF + + END SUBROUTINE h5gget_info_by_idx_f +! +!****s* H5G/h5gget_info_by_name_f +! +! NAME +! h5gget_info_by_name_f +! +! PURPOSE +! Retrieves information about a group. +! +! INPUTS +! loc_id - File or group identifier +! group_name - Name of group containing group for which information is to be retrieved +! +! OUTPUTS +! +! storage_type - Type of storage for links in group +! H5G_STORAGE_TYPE_COMPACT: Compact storage +! H5G_STORAGE_TYPE_DENSE: Indexed storage +! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure +! nlinks - Number of links in group +! max_corder - Current maximum creation order value for group +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! mounted - Whether group has a file mounted on it +! +! NOTES +! In C the output is defined as a structure: H5G_info_t +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! HISTORY +! Added 'mounted' paramater +! M. Scot Breitenfeld +! July 16, 2008 +! SOURCE + SUBROUTINE h5gget_info_by_name_f(loc_id, group_name, & + storage_type, nlinks, max_corder, hdferr, lapl_id, mounted) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved + + INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: + ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage + ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage + ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure + INTEGER, INTENT(OUT) :: nlinks ! Number of links in group + INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list + LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it +!***** + INTEGER :: mounted_c + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: group_name_len ! length of group name + + INTERFACE + INTEGER FUNCTION h5gget_info_by_name_c(loc_id, group_name, group_name_len, lapl_id_default, & + storage_type, nlinks, max_corder, mounted_c) BIND(C,NAME='h5gget_info_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER(HID_T), INTENT(IN) :: lapl_id_default + INTEGER, INTENT(OUT) :: storage_type + INTEGER, INTENT(OUT) :: nlinks + INTEGER, INTENT(OUT) :: max_corder + + INTEGER(SIZE_T) :: group_name_len + INTEGER :: mounted_c + + END FUNCTION h5gget_info_by_name_c + END INTERFACE + + group_name_len = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5gget_info_by_name_c(loc_id, group_name, group_name_len, lapl_id_default, & + storage_type, nlinks, max_corder, mounted_c) + + IF(PRESENT(mounted))THEN + IF(mounted_c.EQ.0) THEN + mounted = .FALSE. + ELSE + mounted = .TRUE. + ENDIF + ENDIF + + END SUBROUTINE h5gget_info_by_name_f + +END MODULE H5G diff --git a/fortran/src/H5Gff.f90 b/fortran/src/H5Gff.f90 deleted file mode 100644 index d4d7496..0000000 --- a/fortran/src/H5Gff.f90 +++ /dev/null @@ -1,1331 +0,0 @@ -!****h* ROBODoc/H5G -! -! NAME -! MODULE H5G -! -! FILE -! fortran/src/H5Gff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5G functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5G function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5G - USE H5GLOBAL - -! PRIVATE :: h5gcreate1_f -! PRIVATE :: h5gcreate2_f - -! INTERFACE h5gcreate_f -! MODULE PROCEDURE h5gcreate1_f -! MODULE PROCEDURE h5gcreate2_f -! END INTERFACE - -CONTAINS - -!****s* H5G/h5gcreate_f -! -! NAME -! h5gcreate_f -! -! PURPOSE -! Creates a new group. -! -! INPUTS -! loc_id - location identifier -! name - group name at the specified location -! OUTPUTS -! grp_id - group identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! size_hint - a parameter indicating the number of bytes to -! reserve for the names that will appear in the group -! lcpl_id - Property list for link creation -! gcpl_id - Property list for group creation -! gapl_id - Property list for group access -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! Added additional optional paramaters in 1.8 -! MSB - February 27, 2008 -! -! SOURCE - SUBROUTINE h5gcreate_f(loc_id, name, grp_id, hdferr, size_hint, lcpl_id, gcpl_id, gapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group - INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(SIZE_T), OPTIONAL, INTENT(IN) :: size_hint - ! Parameter indicating - ! the number of bytes - ! to reserve for the - ! names that will appear - ! in the group. Set to OBJECT_NAMELEN_DEFAULT_F - ! if using any of the optional - ! parameters lcpl_id, gcpl_id, and/or gapl_id when not - ! using keywords in specifying the optional parameters - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Property list for link creation - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access -!***** - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: gcpl_id_default - INTEGER(HID_T) :: gapl_id_default - - INTEGER :: namelen ! Length of the name character string - INTEGER(SIZE_T) :: size_hint_default - - INTERFACE - INTEGER FUNCTION h5gcreate_c(loc_id, name, namelen, & - size_hint_default, grp_id, lcpl_id_default, gcpl_id_default, gapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GCREATE_C'::h5gcreate_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(SIZE_T) :: size_hint_default - INTEGER(HID_T), INTENT(OUT) :: grp_id - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: gcpl_id_default - INTEGER(HID_T) :: gapl_id_default - END FUNCTION h5gcreate_c - END INTERFACE - - size_hint_default = OBJECT_NAMELEN_DEFAULT_F - IF (PRESENT(size_hint)) size_hint_default = size_hint - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - gcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id - gapl_id_default = H5P_DEFAULT_F - IF(PRESENT(gapl_id)) gapl_id_default = gapl_id - - namelen = LEN(name) - - hdferr = h5gcreate_c(loc_id, name, namelen, size_hint_default, grp_id, & - lcpl_id_default, gcpl_id_default, gapl_id_default) - - END SUBROUTINE h5gcreate_f - -!!$! -!!$!****s* H5G/ -!!$! -!!$! NAME -!!$! h5gcreate2_f -!!$! -!!$! PURPOSE -!!$! Creates a new group. -!!$! -!!$! INPUTS -!!$! loc_id - location identifier -!!$! name - group name at the specified location -!!$! OUTPUTS -!!$! grp_id - group identifier -!!$! hdferr: - error code -!!$! Success: 0 -!!$! Failure: -1 -!!$! OPTIONAL PARAMETERS -!!$! -!!$! lcpl_id - Property list for link creation -!!$! gcpl_id - Property list for group creation -!!$! gapl_id - Property list for group access -!!$! -!!$! AUTHOR M. Scot Breitenfeld -!!$! February 27, 2008 -!!$! -!!$! HISTORY -!!$! -!!$! NOTES Needed to switch the first 2 arguments to avoid conflect -!!$! with h5gcreate1_f -!!$! -!!$ -!!$ SUBROUTINE h5gcreate2_f(name, loc_id, grp_id, hdferr, & -!!$ lcpl_id, gcpl_id, gapl_id) -!!$ IMPLICIT NONE -!!$ CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group -!!$ INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier -!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code -!!$ INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier -!!$ -!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Property list for link creation -!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation -!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access -!!$ -!!$ INTEGER(HID_T) :: lcpl_id_default -!!$ INTEGER(HID_T) :: gcpl_id_default -!!$ INTEGER(HID_T) :: gapl_id_default -!!$ -!!$ INTEGER(SIZE_T) :: OBJECT_NAME -! LEN_DEFAULT ! Dummy argument to pass to c call -!!$ INTEGER :: namelen ! Length of the name character string -!!$ -!!$! MS FORTRAN needs explicit interface for C functions called here. -!!$! -!!$ INTERFACE -!!$ INTEGER FUNCTION h5gcreate_c(loc_id, name, namelen, & -!!$ OBJECT_NAME -! LEN_DEFAULT, grp_id, lcpl_id_default, gcpl_id_default, gapl_id_default) -!!$ USE H5GLOBAL -!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) -!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GCREATE_C'::h5gcreate_c -!!$ !DEC$ENDIF -!!$ !DEC$ATTRIBUTES reference :: name -!!$ INTEGER(HID_T), INTENT(IN) :: loc_id -!!$ CHARACTER(LEN=*), INTENT(IN) :: name -!!$ INTEGER :: namelen -!!$ INTEGER(SIZE_T) :: OBJECT_NAME -! LEN_DEFAULT -!!$ INTEGER(HID_T) :: lcpl_id_default -!!$ INTEGER(HID_T) :: gcpl_id_default -!!$ INTEGER(HID_T) :: gapl_id_default -!!$ INTEGER(HID_T), INTENT(OUT) :: grp_id -!!$ END FUNCTION h5gcreate_c -!!$ END INTERFACE -!!$ -!!$ namelen = LEN(name) -!!$ OBJECT_NAME -! LEN_DEFAULT = OBJECT_NAME -! LEN_DEFAULT_F -!!$ -!!$ lcpl_id_default = H5P_DEFAULT_F -!!$ IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id -!!$ gcpl_id_default = H5P_DEFAULT_F -!!$ IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id -!!$ gapl_id_default = H5P_DEFAULT_F -!!$ IF(PRESENT(gapl_id)) gapl_id_default = gapl_id -!!$ -!!$ -!!$ hdferr = h5gcreate_c(loc_id, name, namelen, OBJECT_NAME -! LEN_DEFAULT, grp_id, & -!!$ lcpl_id_default, gcpl_id_default, gapl_id_default) -!!$ -!!$ END SUBROUTINE h5gcreate2_f - -! -!****s* H5G/h5gopen_f -! -! NAME -! h5gopen_f -! -! PURPOSE -! Opens an existing group. -! -! INPUTS -! loc_id - location identifier -! name - name of the group to open -! OUTPUTS -! grp_id - group identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! gapl_id - Group access property list identifier -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! Added 1.8 (optional) parameter gapl_id -! February, 2008 M. Scot Breitenfeld -! -! SOURCE - SUBROUTINE h5gopen_f(loc_id, name, grp_id, hdferr, gapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group - INTEGER(HID_T), INTENT(OUT) :: grp_id ! File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Group access property list identifier -!***** - INTEGER(HID_T) :: gapl_id_default - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5gopen_c(loc_id, name, namelen, gapl_id_default, grp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GOPEN_C'::h5gopen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: gapl_id_default - INTEGER(HID_T), INTENT(OUT) :: grp_id - END FUNCTION h5gopen_c - END INTERFACE - - gapl_id_default = H5P_DEFAULT_F - IF(PRESENT(gapl_id)) gapl_id_default = gapl_id - - namelen = LEN(name) - hdferr = h5gopen_c(loc_id, name, namelen, gapl_id_default, grp_id) - - END SUBROUTINE h5gopen_f -! -!****s* H5G/h5gclose_f -! -! NAME -! h5gclose_f -! -! PURPOSE -! Closes the specified group. -! -! INPUTS -! grp_id - group identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gclose_f(grp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: grp_id ! Group identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5gclose_c(grp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GCLOSE_C'::h5gclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: grp_id - END FUNCTION h5gclose_c - END INTERFACE - - hdferr = h5gclose_c(grp_id) - - END SUBROUTINE h5gclose_f -! -!****s* H5G/h5gget_obj_info_idx_f -! -! NAME -! h5gget_obj_info_idx_f -! -! PURPOSE -! Returns name and type of the group member identified by -! its index. -! -! INPUTS -! loc_id - location identifier -! name - name of the group at the specified location -! idx - object index (zero-based) -! OUTPUTS -! obj_name - object name -! obj_type - object type -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gget_obj_info_idx_f(loc_id, name, idx, & - obj_name, obj_type, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group - INTEGER, INTENT(IN) :: idx ! Index of member object - CHARACTER(LEN=*), INTENT(OUT) :: obj_name ! Name of the object - INTEGER, INTENT(OUT) :: obj_type ! Object type - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Length of the name character string - INTEGER :: obj_namelen ! Length of the obj_name character string - - INTERFACE - INTEGER FUNCTION h5gget_obj_info_idx_c(loc_id, name, & - namelen, idx, & - obj_name, obj_namelen, obj_type) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_OBJ_INFO_IDX_C'::h5gget_obj_info_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: obj_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER, INTENT(IN) :: idx - CHARACTER(LEN=*), INTENT(OUT) :: obj_name - INTEGER :: obj_namelen - INTEGER, INTENT(OUT) :: obj_type - END FUNCTION h5gget_obj_info_idx_c - END INTERFACE - - namelen = LEN(name) - obj_namelen = LEN(obj_name) - hdferr = h5gget_obj_info_idx_c(loc_id, name, namelen, idx, & - obj_name, obj_namelen, obj_type) - END SUBROUTINE h5gget_obj_info_idx_f - -! -!****s* H5G/h5gn_members_f -! -! NAME -! h5gn_members_f -! -! PURPOSE -! Returns the number of group members. -! -! INPUTS -! loc_id - location identifier -! name - name of the group at the specified location -! OUTPUTS -! nmembers - number of group members -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gn_members_f(loc_id, name, nmembers, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the group - INTEGER, INTENT(OUT) :: nmembers ! Number of members in the - ! group - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Length of the name character string - - INTERFACE - INTEGER FUNCTION h5gn_members_c(loc_id, name, namelen, nmembers) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GN_MEMBERS_C'::h5gn_members_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER, INTENT(OUT) :: nmembers - END FUNCTION h5gn_members_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5gn_members_c(loc_id, name, namelen, nmembers) - - END SUBROUTINE h5gn_members_f -! -!****s* H5G/h5glink_f -! -! NAME -! h5glink_f -! -! PURPOSE -! Creates a link of the specified type from new_name -! to current_name. -! -! INPUTS -! loc_id - location identifier -! link_type - link type; possible values are: -! H5G_LINK_HARD_F (0) -! H5G_LINK_SOFT_F (1) -! current_name - name of the existing object if link is a -! hard link. Can be anything for the soft link -! new_name - new name for the object -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5glink_f(loc_id, link_type, current_name, & - new_name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - INTEGER, INTENT(IN) :: link_type ! link type - ! Possible values are: - ! H5G_LINK_HARD_F (0) or - ! H5G_LINK_SOFT_F (1) - - CHARACTER(LEN=*), INTENT(IN) :: current_name - ! Current name of an object - CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTEGER :: current_namelen ! Lenghth of the current_name string - INTEGER :: new_namelen ! Lenghth of the new_name string - - INTERFACE - INTEGER FUNCTION h5glink_c(loc_id, link_type, current_name, & - current_namelen, new_name, new_namelen) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GLINK_C'::h5glink_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: current_name - !DEC$ATTRIBUTES reference :: new_name - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER, INTENT(IN) :: link_type - CHARACTER(LEN=*), INTENT(IN) :: current_name - INTEGER :: current_namelen - CHARACTER(LEN=*), INTENT(IN) :: new_name - INTEGER :: new_namelen - END FUNCTION h5glink_c - END INTERFACE - - current_namelen = LEN(current_name) - new_namelen = LEN(new_name) - hdferr = h5glink_c(loc_id, link_type, current_name, & - current_namelen, new_name, new_namelen) - END SUBROUTINE h5glink_f - -! -!****s* H5G/h5glink2_f -! -! NAME -! h5glink2_f -! -! PURPOSE -! Creates a link of the specified type from new_name -! to current_name. current_name and new_name are interpreted -! releative to current and new location identifiers. -! -! INPUTS -! cur_loc_id - location identifier -! cur_name - name of the existing object if link is a -! hard link. Can be anything for the soft link. -! link_type - link type; possible values are: -! H5G_LINK_HARD_F (0) -! H5G_LINK_SOFT_F (1) -! new_loc_id - new location identifier -! new_name - new name for the object -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 25, 2002 -! -! SOURCE - SUBROUTINE h5glink2_f(cur_loc_id, cur_name, link_type, new_loc_id, & - new_name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: cur_loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: cur_name - ! Current name of an object - INTEGER, INTENT(IN) :: link_type ! link type - ! Possible values are: - ! H5G_LINK_HARD_F (0) or - ! H5G_LINK_SOFT_F (1) - - INTEGER(HID_T), INTENT(IN) :: new_loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTEGER :: cur_namelen ! Lenghth of the current_name string - INTEGER :: new_namelen ! Lenghth of the new_name string - - INTERFACE - INTEGER FUNCTION h5glink2_c(cur_loc_id, cur_name, cur_namelen, & - link_type, new_loc_id, & - new_name, new_namelen) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GLINK2_C'::h5glink2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: cur_name - !DEC$ATTRIBUTES reference :: new_name - INTEGER(HID_T), INTENT(IN) :: cur_loc_id - INTEGER(HID_T), INTENT(IN) :: new_loc_id - INTEGER, INTENT(IN) :: link_type - CHARACTER(LEN=*), INTENT(IN) :: cur_name - CHARACTER(LEN=*), INTENT(IN) :: new_name - INTEGER :: cur_namelen - INTEGER :: new_namelen - END FUNCTION h5glink2_c - END INTERFACE - - cur_namelen = LEN(cur_name) - new_namelen = LEN(new_name) - hdferr = h5glink2_c(cur_loc_id, cur_name, cur_namelen, link_type, & - new_loc_id, new_name, new_namelen) - END SUBROUTINE h5glink2_f - -! -!****s* H5G/h5gunlink_f -! -! NAME -! h5gunlink_f -! -! PURPOSE -! Removes the specified name from the group graph and -! decrements the link count for the object to which name -! points -! -! INPUTS -! loc_id - location identifier -! name - name of the object to unlink -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gunlink_f(loc_id, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Lenghth of the name character string - - INTERFACE - INTEGER FUNCTION h5gunlink_c(loc_id, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GUNLINK_C'::h5gunlink_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - END FUNCTION h5gunlink_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5gunlink_c(loc_id, name, namelen) - END SUBROUTINE h5gunlink_f - -! -!****s* H5G/h5gmove_f -! -! NAME -! h5gmove_f -! -! PURPOSE -! Renames an object within an HDF5 file. -! -! INPUTS -! loc_id - location identifier -! name - object's name at specified location -! new_name - object's new name -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gmove_f(loc_id, name, new_name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object - CHARACTER(LEN=*), INTENT(IN) :: new_name ! New name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Lenghth of the current_name string - INTEGER :: new_namelen ! Lenghth of the new_name string - - INTERFACE - INTEGER FUNCTION h5gmove_c(loc_id, name, namelen, new_name, new_namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GMOVE_C'::h5gmove_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: new_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - CHARACTER(LEN=*), INTENT(IN) :: new_name - INTEGER :: new_namelen - END FUNCTION h5gmove_c - END INTERFACE - - namelen = LEN(name) - new_namelen = LEN(new_name) - hdferr = h5gmove_c(loc_id, name, namelen, new_name, new_namelen) - END SUBROUTINE h5gmove_f -! -!****s* H5G/h5gmove2_f -! -! NAME -! h5gmove2_f -! -! PURPOSE -! Renames an object within an HDF5 file. -! -! INPUTS -! src_loc_id - original location identifier -! src_name - object's name at specified original location -! dst_loc_id - original location identifier -! dst_name - object's new name -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! September 25, 2002 -! -! SOURCE - SUBROUTINE h5gmove2_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: src_loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: src_name ! Original name of an object - INTEGER(HID_T), INTENT(IN) :: dst_loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: dst_name ! New name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: src_namelen ! Length of the current_name string - INTEGER :: dst_namelen ! Lenghth of the new_name string - - INTERFACE - INTEGER FUNCTION h5gmove2_c(src_loc_id, src_name, src_namelen, & - dst_loc_id, dst_name, dst_namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GMOVE2_C'::h5gmove2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: src_name - !DEC$ATTRIBUTES reference :: dst_name - INTEGER(HID_T), INTENT(IN) :: src_loc_id - INTEGER(HID_T), INTENT(IN) :: dst_loc_id - CHARACTER(LEN=*), INTENT(IN) :: src_name - CHARACTER(LEN=*), INTENT(IN) :: dst_name - INTEGER :: src_namelen - INTEGER :: dst_namelen - END FUNCTION h5gmove2_c - END INTERFACE - - src_namelen = LEN(src_name) - dst_namelen = LEN(dst_name) - hdferr = h5gmove2_c(src_loc_id, src_name, src_namelen, dst_loc_id, dst_name, dst_namelen) - END SUBROUTINE h5gmove2_f -! -!****s* H5G/h5gget_linkval_f -! -! NAME -! h5gget_linkval_f -! -! PURPOSE -! Returns the name of the object that the symbolic link -! points to. -! -! INPUTS -! loc_id - location identifier -! name - symbolic link to the object whose name -! is to be returned. -! size - maximum number of characters to be returned -! OUTPUTS -! buffer - a buffer to hold the name of the object -! being sought -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gget_linkval_f(loc_id, name, size, buffer, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object - INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of buffer - CHARACTER(LEN=size), INTENT(OUT) :: buffer - ! Buffer to hold a name of - ! the object symbolic link - ! points to - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Lenghth of the current_name string - - INTERFACE - INTEGER FUNCTION h5gget_linkval_c(loc_id, name, namelen, size, buffer) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_LINKVAL_C'::h5gget_linkval_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: buffer - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(SIZE_T), INTENT(IN) :: size - CHARACTER(LEN=*), INTENT(OUT) :: buffer - END FUNCTION h5gget_linkval_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5gget_linkval_c(loc_id, name, namelen, size, buffer) - END SUBROUTINE h5gget_linkval_f - -! -!****s* H5G/h5gset_comment_f -! -! NAME -! h5gset_comment_f -! -! PURPOSE -! Sets comment for specified object. -! -! INPUTS -! loc_id - location identifier -! name - name of the object -! comment - comment to set for the object -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gset_comment_f(loc_id, name, comment, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object - CHARACTER(LEN=*), INTENT(IN) :: comment ! New name of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Lenghth of the current_name string - INTEGER :: commentlen ! Lenghth of the comment string - - INTERFACE - INTEGER FUNCTION h5gset_comment_c(loc_id, name, namelen, & - comment, commentlen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GSET_COMMENT_C'::h5gset_comment_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: comment - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - CHARACTER(LEN=*), INTENT(IN) :: comment - INTEGER :: commentlen - END FUNCTION h5gset_comment_c - END INTERFACE - - namelen = LEN(name) - commentlen = LEN(comment) - hdferr = h5gset_comment_c(loc_id, name, namelen, comment, commentlen) - END SUBROUTINE h5gset_comment_f -! -!****s* H5G/h5gget_comment_f -! -! NAME -! h5gget_comment_f -! -! PURPOSE -! Retrieves comment for specified object. -! -! INPUTS -! loc_id - location identifier -! name - name of the object at specified location -! size - size of the buffer required to hold comment -! OUTPUTS -! buffer - buffer to hold object's comment -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5gget_comment_f(loc_id, name, size, buffer, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Current name of an object - INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of buffer - CHARACTER(LEN=size), INTENT(OUT) :: buffer - ! Buffer to hold a comment - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Length of the current_name string - - INTERFACE - INTEGER FUNCTION h5gget_comment_c(loc_id, name, namelen, size, buffer) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_COMMENT_C'::h5gget_comment_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name, buffer - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(SIZE_T), INTENT(IN) :: size - CHARACTER(LEN=*), INTENT(OUT) :: buffer - END FUNCTION h5gget_comment_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5gget_comment_c(loc_id, name, namelen, size, buffer) - - END SUBROUTINE h5gget_comment_f -! -!****s* H5G/H5Gcreate_anon_f -! -! NAME -! H5Gcreate_anon_f -! -! PURPOSE -! Creates a new empty group without linking it into the file structure. -! -! INPUTS -! loc_id - Location identifier -! OUTPUTS -! grp_id - group identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! gcpl_id - Group creation property list identifier -! gapl_id - Group access property list identifier -! -! AUTHOR -! M. Scot Breitenfeld -! February 15, 2008 -! -! SOURCE - SUBROUTINE h5Gcreate_anon_f(loc_id, grp_id, hdferr, gcpl_id, gapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gcpl_id ! Property list for group creation - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: gapl_id ! Property list for group access -!***** - INTEGER(HID_T) :: gcpl_id_default - INTEGER(HID_T) :: gapl_id_default - - INTERFACE - INTEGER FUNCTION h5gcreate_anon_c(loc_id, gcpl_id_default, gapl_id_default, grp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GCREATE_ANON_C'::h5gcreate_anon_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - INTEGER(HID_T), INTENT(IN) :: gcpl_id_default ! Property list for group creation - INTEGER(HID_T), INTENT(IN) :: gapl_id_default ! Property list for group access - INTEGER(HID_T), INTENT(OUT) :: grp_id ! Group identifier - END FUNCTION h5gcreate_anon_c - END INTERFACE - - gcpl_id_default = H5P_DEFAULT_F - gapl_id_default = H5P_DEFAULT_F - - IF(PRESENT(gcpl_id)) gcpl_id_default = gcpl_id - IF(PRESENT(gapl_id)) gapl_id_default = gapl_id - - hdferr = h5gcreate_anon_c(loc_id, gcpl_id_default, gapl_id_default, grp_id) - - END SUBROUTINE h5Gcreate_anon_f -! -!****s* H5G/H5Gget_create_plist_f -! -! NAME -! H5Gget_create_plist_f -! -! PURPOSE -! Gets a group creation property list identifier. -! -! INPUTS -! grp_id - group identifier -! OUTPUTS -! gcpl_id - Group creation property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! February 15, 2008 -! -! SOURCE - SUBROUTINE h5gget_create_plist_f(grp_id, gcpl_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: grp_id ! Group identifier - INTEGER(HID_T), INTENT(OUT) :: gcpl_id ! Property list for group creation - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5gget_create_plist_c(grp_id, gcpl_id ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_CREATE_PLIST_C'::h5gget_create_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: grp_id - INTEGER(HID_T), INTENT(OUT) :: gcpl_id - END FUNCTION h5gget_create_plist_c - END INTERFACE - - hdferr = h5gget_create_plist_c(grp_id, gcpl_id ) - - END SUBROUTINE h5gget_create_plist_f - -! -!****s* H5G/h5gget_info_f -! -! NAME -! h5gget_info_f -! -! PURPOSE -! Retrieves information about a group -! -! INPUTS -! group_id - Group identifier -! -! OUTPUTS -! storage_type - Type of storage for links in group -! H5G_STORAGE_TYPE_COMPACT: Compact storage -! H5G_STORAGE_TYPE_DENSE: Indexed storage -! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure -! nlinks - Number of links in group -! max_corder - Current maximum creation order value for group -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! mounted - Whether group has a file mounted on it -! -! AUTHOR -! M. Scot Breitenfeld -! February 15, 2008 -! -! NOTES -! In C the output is defined as a structure: H5G_info_t -! -! HISTORY -! -! - Added 'mounted' paramater -! M. Scot Breitenfeld -! July 16, 2008 -! -! SOURCE - SUBROUTINE h5gget_info_f(group_id, storage_type, nlinks, max_corder, hdferr, mounted) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: group_id ! Group identifier - - INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: - ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage - ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage - ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure - INTEGER, INTENT(OUT) :: nlinks ! Number of links in group - INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it -!***** - INTEGER :: mounted_c - - INTERFACE - INTEGER FUNCTION h5gget_info_c(group_id, storage_type, nlinks, max_corder, mounted_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_INFO_C'::h5gget_info_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: group_id - INTEGER, INTENT(OUT) :: storage_type - INTEGER, INTENT(OUT) :: nlinks - INTEGER, INTENT(OUT) :: max_corder - INTEGER :: mounted_c - END FUNCTION h5gget_info_c - END INTERFACE - - hdferr = h5gget_info_c(group_id, storage_type, nlinks, max_corder, mounted_c) - - IF(PRESENT(mounted))THEN - IF(mounted_c.EQ.0) THEN - mounted = .FALSE. - ELSE - mounted = .TRUE. - ENDIF - ENDIF - - END SUBROUTINE h5gget_info_f -! -!****s* H5G/h5gget_info_by_idx_f -! -! NAME -! h5gget_info_by_idx_f -! -! PURPOSE -! Retrieves information about a group, according to the group’s position within an index. -! -! INPUTS -! loc_id - File or group identifier -! group_name - Name of group containing group for which information is to be retrieved -! index_type - Index type -! order - Order of the count in the index -! n - Position in the index of the group for which information is retrieved -! -! OUTPUTS -! storage_type - Type of storage for links in group -! H5G_STORAGE_TYPE_COMPACT: Compact storage -! H5G_STORAGE_TYPE_DENSE: Indexed storage -! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure -! nlinks - Number of links in group -! max_corder - Current maximum creation order value for group -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! mounted - Whether group has a file mounted on it -! -! NOTES -! In C the output is defined as a structure: H5G_info_t -! -! AUTHOR -! M. Scot Breitenfeld -! February 18, 2008 -! -! HISTORY -! Added 'mounted' paramater -! M. Scot Breitenfeld -! July 16, 2008 -! -! SOURCE - SUBROUTINE h5gget_info_by_idx_f(loc_id, group_name, index_type, order, n, & - storage_type, nlinks, max_corder, hdferr, lapl_id, mounted) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved - INTEGER, INTENT(IN) :: index_type ! Index type - INTEGER, INTENT(IN) :: order ! Order of the count in the index - INTEGER(HSIZE_T), INTENT(IN) :: n ! Position in the index of the group for which information is retrieved - - INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: - ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage - ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage - ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure - INTEGER, INTENT(OUT) :: nlinks ! Number of links in group - INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list - LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it -!***** - INTEGER :: mounted_c - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: group_name_len ! length of group name - - INTERFACE - INTEGER FUNCTION h5gget_info_by_idx_c(loc_id, group_name, group_name_len, index_type, order, n, lapl_id_default, & - storage_type, nlinks, max_corder, mounted_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_INFO_BY_IDX_C'::h5gget_info_by_idx_c - !DEC$ENDIF - - !DEC$ATTRIBUTES reference :: group_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER, INTENT(IN) :: index_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) :: lapl_id_default - INTEGER, INTENT(OUT) :: storage_type - INTEGER, INTENT(OUT) :: nlinks - INTEGER, INTENT(OUT) :: max_corder - - INTEGER(SIZE_T) :: group_name_len - INTEGER :: mounted_c - - END FUNCTION h5gget_info_by_idx_c - END INTERFACE - - group_name_len = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5gget_info_by_idx_c(loc_id, group_name, group_name_len, & - index_type, order, n, lapl_id_default, & - storage_type, nlinks, max_corder, mounted_c) - - IF(PRESENT(mounted))THEN - IF(mounted_c.EQ.0) THEN - mounted = .FALSE. - ELSE - mounted = .TRUE. - ENDIF - ENDIF - - END SUBROUTINE h5gget_info_by_idx_f -! -!****s* H5G/h5gget_info_by_name_f -! -! NAME -! h5gget_info_by_name_f -! -! PURPOSE -! Retrieves information about a group. -! -! INPUTS -! loc_id - File or group identifier -! group_name - Name of group containing group for which information is to be retrieved -! -! OUTPUTS -! -! storage_type - Type of storage for links in group -! H5G_STORAGE_TYPE_COMPACT: Compact storage -! H5G_STORAGE_TYPE_DENSE: Indexed storage -! H5G_STORAGE_TYPE_SYMBOL_TABLE: Symbol tables, the original HDF5 structure -! nlinks - Number of links in group -! max_corder - Current maximum creation order value for group -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! mounted - Whether group has a file mounted on it -! -! NOTES -! In C the output is defined as a structure: H5G_info_t -! -! AUTHOR -! M. Scot Breitenfeld -! February 18, 2008 -! -! HISTORY -! Added 'mounted' paramater -! M. Scot Breitenfeld -! July 16, 2008 -! SOURCE - SUBROUTINE h5gget_info_by_name_f(loc_id, group_name, & - storage_type, nlinks, max_corder, hdferr, lapl_id, mounted) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of group containing group for which information is to be retrieved - - INTEGER, INTENT(OUT) :: storage_type ! Type of storage for links in group: - ! H5G_STORAGE_TYPE_COMPACT_F: Compact storage - ! H5G_STORAGE_TYPE_DENSE_F: Indexed storage - ! H5G_STORAGE_TYPE_SYMBOL_TABLE_F: Symbol tables, the original HDF5 structure - INTEGER, INTENT(OUT) :: nlinks ! Number of links in group - INTEGER, INTENT(OUT) :: max_corder ! Current maximum creation order value for group - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list - LOGICAL, INTENT(OUT), OPTIONAL :: mounted ! Whether group has a file mounted on it -!***** - INTEGER :: mounted_c - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: group_name_len ! length of group name - - INTERFACE - INTEGER FUNCTION h5gget_info_by_name_c(loc_id, group_name, group_name_len, lapl_id_default, & - storage_type, nlinks, max_corder, mounted_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GGET_INFO_BY_NAME_C'::h5gget_info_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: group_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER(HID_T), INTENT(IN) :: lapl_id_default - INTEGER, INTENT(OUT) :: storage_type - INTEGER, INTENT(OUT) :: nlinks - INTEGER, INTENT(OUT) :: max_corder - - INTEGER(SIZE_T) :: group_name_len - INTEGER :: mounted_c - - END FUNCTION h5gget_info_by_name_c - END INTERFACE - - group_name_len = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5gget_info_by_name_c(loc_id, group_name, group_name_len, lapl_id_default, & - storage_type, nlinks, max_corder, mounted_c) - - IF(PRESENT(mounted))THEN - IF(mounted_c.EQ.0) THEN - mounted = .FALSE. - ELSE - mounted = .TRUE. - ENDIF - ENDIF - - END SUBROUTINE h5gget_info_by_name_f - -END MODULE H5G diff --git a/fortran/src/H5If.c b/fortran/src/H5If.c index 55868dd..fdab0b6 100644 --- a/fortran/src/H5If.c +++ b/fortran/src/H5If.c @@ -1,6 +1,6 @@ /****h* H5If/H5If * PURPOSE - * This file contains C stubs for H5I Fortran APIs + * This file contains C stubs for H5I Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -25,15 +25,15 @@ /****if* H5If/h5iget_type_c * NAME - * h5iget_type_c + * h5iget_type_c * PURPOSE - * Call H5Iget_type to get the type of an object + * Call H5Iget_type to get the type of an object * INPUTS - * obj_id - object identifier + * obj_id - object identifier * OUTPUTS - * type - object type + * type - object type * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su * Thursday, March 24, 2000 @@ -42,7 +42,7 @@ * SOURCE */ int_f -nh5iget_type_c (hid_t_f *obj_id, int_f *type) +h5iget_type_c (hid_t_f *obj_id, int_f *type) /******/ { int ret_value = -1; @@ -61,29 +61,29 @@ nh5iget_type_c (hid_t_f *obj_id, int_f *type) } /****if* H5If/h5iget_name_c * NAME - * h5iget_name_c + * h5iget_name_c * PURPOSE - * Call H5Iget_name to get object's name + * Call H5Iget_name to get object's name * INPUTS - * obj_id - object identifier - * buf_size - size of the buffer + * obj_id - object identifier + * buf_size - size of the buffer * OUTPUTS - * buf - buffer to hold the name + * buf - buffer to hold the name * RETURNS - * length of the name on success, -1 on failure + * length of the name on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12, 2003 + * Wednesday, March 12, 2003 * HISTORY * - * Changed the size of c_buf_size to c_buf_size + 1, which - * fixes the problem of truncating the string by 1 if the - * exact size of the string (buf_size) is passed in. + * Changed the size of c_buf_size to c_buf_size + 1, which + * fixes the problem of truncating the string by 1 if the + * exact size of the string (buf_size) is passed in. * M. Scot Breitenfeld, April 21, 2008 * SOURCE */ int_f -nh5iget_name_c(hid_t_f *obj_id, _fcd buf, size_t_f *buf_size, size_t_f *name_size) +h5iget_name_c(hid_t_f *obj_id, _fcd buf, size_t_f *buf_size, size_t_f *name_size) /******/ { int ret_value = -1; @@ -120,22 +120,22 @@ DONE: /****if* H5If/h5iinc_ref_c * NAME - * h5iinc_ref_c + * h5iinc_ref_c * PURPOSE - * Call H5Iinc_ref to increment object's reference count + * Call H5Iinc_ref to increment object's reference count * INPUTS - * obj_id - object identifier + * obj_id - object identifier * OUTPUTS - * ref_count - Reference count of ID + * ref_count - Reference count of ID * RETURNS - * current reference count on success, -1 on failure + * current reference count on success, -1 on failure * AUTHOR * Quincey Koziol * Tuesday, December 9, 2003 * SOURCE */ int_f -nh5iinc_ref_c(hid_t_f *obj_id, int_f *ref_count) +h5iinc_ref_c(hid_t_f *obj_id, int_f *ref_count) /******/ { int ret_value; @@ -156,22 +156,22 @@ done: /****if* H5If/h5idec_ref_c * NAME - * h5idec_ref_c + * h5idec_ref_c * PURPOSE - * Call H5Idec_ref to decrement object's reference count + * Call H5Idec_ref to decrement object's reference count * INPUTS - * obj_id - object identifier + * obj_id - object identifier * OUTPUTS - * ref_count - Reference count of ID + * ref_count - Reference count of ID * RETURNS - * current reference count on success, -1 on failure + * current reference count on success, -1 on failure * AUTHOR * Quincey Koziol - * Tuesday, December 9, 2003 + * Tuesday, December 9, 2003 * SOURCE */ int_f -nh5idec_ref_c(hid_t_f *obj_id, int_f *ref_count) +h5idec_ref_c(hid_t_f *obj_id, int_f *ref_count) /******/ { int ret_value; @@ -192,15 +192,15 @@ done: /****if* H5If/h5iget_ref_c * NAME - * h5iget_ref_c + * h5iget_ref_c * PURPOSE - * Call H5Iget_ref to retrieve object's reference count + * Call H5Iget_ref to retrieve object's reference count * INPUTS - * obj_id - object identifier + * obj_id - object identifier * OUTPUTS - * ref_count - Reference count of ID + * ref_count - Reference count of ID * RETURNS - * current reference count on success, -1 on failure + * current reference count on success, -1 on failure * AUTHOR * Quincey Koziol * Tuesday, December 9, 2003 @@ -208,7 +208,7 @@ done: * SOURCE */ int_f -nh5iget_ref_c(hid_t_f *obj_id, int_f *ref_count) +h5iget_ref_c(hid_t_f *obj_id, int_f *ref_count) /******/ { int ret_value; @@ -229,15 +229,15 @@ done: /****if* H5If/h5iget_file_id_c * NAME - * h5iget_file_id_c + * h5iget_file_id_c * PURPOSE - * Call H5Iget_file_id to obtain file identifier from object identifier + * Call H5Iget_file_id to obtain file identifier from object identifier * INPUTS - * obj_id - object identifier + * obj_id - object identifier * OUTPUTS - * file_id - file identifier + * file_id - file identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Tuesday, August 24, 2004 @@ -245,7 +245,7 @@ done: * SOURCE */ int_f -nh5iget_file_id_c(hid_t_f *obj_id, hid_t_f *file_id) +h5iget_file_id_c(hid_t_f *obj_id, hid_t_f *file_id) /******/ { int ret_value; @@ -266,17 +266,17 @@ done: } /*---------------------------------------------------------------------------- - * Name: h5iis_valid_c - * Purpose: Calls H5Iis_valid - * Inputs: obj_id - object identifier - * Outputs: 0 = false, 1 = true - * Returns: 0 on success, -1 on failure - * Programmer: Elena Pourmal - * Tuesday, August 24, 2004 - * Modifications: + * Name: h5iis_valid_c + * Purpose: Calls H5Iis_valid + * Inputs: obj_id - object identifier + * Outputs: 0 = false, 1 = true + * Returns: 0 on success, -1 on failure + * Programmer: Elena Pourmal + * Tuesday, August 24, 2004 + * Modifications: *---------------------------------------------------------------------------*/ int_f -nh5iis_valid_c(hid_t_f *obj_id, int_f *c_valid) +h5iis_valid_c(hid_t_f *obj_id, int_f *c_valid) { int ret_value; htri_t c_ret_value; diff --git a/fortran/src/H5Iff.F90 b/fortran/src/H5Iff.F90 new file mode 100644 index 0000000..c91a8aa --- /dev/null +++ b/fortran/src/H5Iff.F90 @@ -0,0 +1,345 @@ +!****h* ROBODoc/H5I +! +! NAME +! MODULE H5I +! +! FILE +! fortran/src/H5Iff.F90 +! +! PURPOSE +! This file contains Fortran interfaces for H5I functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5I function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5I + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR + USE H5GLOBAL + +CONTAINS + +!****s* H5I/h5iget_type_f +! +! NAME +! h5iget_type_f +! +! PURPOSE +! Retrieves the type of an object. +! +! INPUTS +! obj_id - object identifier +! OUTPUTS +! type - type of the object, possible values: +! H5I_FILE_F +! H5I_GROUP_F +! H5I_DATATYPE_F +! H5I_DATASPACE_F +! H5I_DATASET_F +! H5I_ATTR_F +! H5I_BADID_F +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 5, 2001 +! +! SOURCE + SUBROUTINE h5iget_type_f(obj_id, TYPE, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(OUT) :: TYPE ! type of an object. + ! possible values are: + ! H5I_FILE_F + ! H5I_GROUP_F + ! H5I_DATATYPE_F + ! H5I_DATASPACE_F + ! H5I_DATASET_F + ! H5I_ATTR_F + ! H5I_BADID_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5iget_type_c(obj_id, TYPE) BIND(C, NAME='h5iget_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(OUT) :: TYPE + END FUNCTION h5iget_type_c + END INTERFACE + hdferr = h5iget_type_c(obj_id, TYPE) + END SUBROUTINE h5iget_type_f + +!****s* H5I/h5iget_name_f +! +! NAME +! h5iget_name_f +! +! PURPOSE +! Gets a name of an object specified by its idetifier. +! +! INPUTS +! obj_id - attribute identifier +! buf_size - size of a buffer to read name in +! OUTPUTS +! buf - buffer to read name in, name will be truncated if +! buffer is not big enough +! name_size - name size +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! SOURCE + SUBROUTINE h5iget_name_f(obj_id, buf, buf_size, name_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER(SIZE_T), INTENT(IN) :: buf_size ! Buffer size + CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer to hold object name + INTEGER(SIZE_T), INTENT(OUT) :: name_size ! Actual name size + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 if successful, + ! -1 if fail +!***** + INTERFACE + INTEGER FUNCTION h5iget_name_c(obj_id, buf, buf_size, name_size) BIND(C, NAME='h5iget_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buf + INTEGER(SIZE_T), INTENT(IN) :: buf_size + INTEGER(SIZE_T), INTENT(OUT) :: name_size + END FUNCTION h5iget_name_c + END INTERFACE + + hdferr = h5iget_name_c(obj_id, buf, buf_size, name_size) + END SUBROUTINE h5iget_name_f + +!****s* H5I/h5iinc_ref_f +! +! NAME +! h5iinc_ref_f +! +! PURPOSE +! Increments the reference count of an ID +! +! INPUTS +! obj_id - object identifier +! OUTPUTS +! ref_count - Current reference count of the ID +! hdferr: - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Quincey Koziol +! December 9, 2003 +! +! SOURCE + SUBROUTINE h5iinc_ref_f(obj_id, ref_count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5iinc_ref_c(obj_id, ref_count) BIND(C, NAME='h5iinc_ref_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(OUT) :: ref_count + END FUNCTION h5iinc_ref_c + END INTERFACE + hdferr = h5iinc_ref_c(obj_id, ref_count) + END SUBROUTINE h5iinc_ref_f + +!****s* H5I/h5idec_ref_f +! +! NAME +! h5idec_ref_f +! +! PURPOSE +! Decrements the reference count of an ID +! +! INPUTS +! obj_id - Object identifier +! OUTPUTS +! ref_count - Current reference count of the ID +! hdferr: - Error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Quincey Koziol +! December 9, 2003 +! +! SOURCE + SUBROUTINE h5idec_ref_f(obj_id, ref_count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5idec_ref_c(obj_id, ref_count) BIND(C, NAME='h5idec_ref_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(OUT) :: ref_count + END FUNCTION h5idec_ref_c + END INTERFACE + hdferr = h5idec_ref_c(obj_id, ref_count) + END SUBROUTINE h5idec_ref_f + +!****s* H5I/h5iget_ref_f +! NAME +! h5iget_ref_f +! +! PURPOSE +! Retrieves the reference count of an ID +! +! INPUTS +! obj_id - object identifier +! +! OUTPUTS +! ref_count - Current reference count of the ID +! hdferr: - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Quincey Koziol +! December 9, 2003 +! +! SOURCE + SUBROUTINE h5iget_ref_f(obj_id, ref_count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5iget_ref_c(obj_id, ref_count) BIND(C, NAME='h5iget_ref_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(OUT) :: ref_count + END FUNCTION h5iget_ref_c + END INTERFACE + hdferr = h5iget_ref_c(obj_id, ref_count) + END SUBROUTINE h5iget_ref_f +! +!****s* H5I/h5iget_file_id_f +! NAME +! h5iget_file_id_f +! +! PURPOSE +! Obtains file identifier from the object identifier +! +! INPUTS +! obj_id - object identifier +! OUTPUTS +! file_id - file identifier +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 23, 2004 +! SOURCE + SUBROUTINE h5iget_file_id_f(obj_id, file_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier + INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5iget_file_id_c(obj_id, file_id) BIND(C, NAME='h5iget_file_id_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER(HID_T), INTENT(OUT) :: file_id + END FUNCTION h5iget_file_id_c + END INTERFACE + hdferr = h5iget_file_id_c(obj_id, file_id) + END SUBROUTINE h5iget_file_id_f +! +!****s* H5I/h5iis_valid_f +! NAME +! h5iget_file_id_f +! +! PURPOSE +! Check if an ID is valid without producing an error message +! +! INPUTS +! id - identifier +! OUTPUTS +! valid - status of id as a valid identifier +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! SOURCE + SUBROUTINE h5iis_valid_f(id, valid, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: id ! Identifier + LOGICAL, INTENT(OUT) :: valid ! Status of id as a valid identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: c_valid ! 0 = .false, 1 = .true. + + INTERFACE + INTEGER FUNCTION h5iis_valid_c(id, c_valid) BIND(C, NAME='h5iis_valid_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: id ! Identifier + INTEGER :: c_valid + END FUNCTION h5iis_valid_c + END INTERFACE + + hdferr = h5iis_valid_c(id, c_valid) + + valid = .FALSE. ! Default + IF(c_valid.EQ.1) valid = .TRUE. + + END SUBROUTINE h5iis_valid_f +END MODULE H5I + diff --git a/fortran/src/H5Iff.f90 b/fortran/src/H5Iff.f90 deleted file mode 100644 index 7c9a843..0000000 --- a/fortran/src/H5Iff.f90 +++ /dev/null @@ -1,352 +0,0 @@ -!****h* ROBODoc/H5I -! -! NAME -! MODULE H5I -! -! FILE -! fortran/src/H5Iff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5I functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5I function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5I - - USE H5GLOBAL - -CONTAINS - -!****s* H5I/h5iget_type_f -! -! NAME -! h5iget_type_f -! -! PURPOSE -! Retrieves the type of an object. -! -! INPUTS -! obj_id - object identifier -! OUTPUTS -! type - type of the object, possible values: -! H5I_FILE_F -! H5I_GROUP_F -! H5I_DATATYPE_F -! H5I_DATASPACE_F -! H5I_DATASET_F -! H5I_ATTR_F -! H5I_BADID_F -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 5, 2001 -! -! SOURCE - SUBROUTINE h5iget_type_f(obj_id, TYPE, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: TYPE ! type of an object. - ! possible values are: - ! H5I_FILE_F - ! H5I_GROUP_F - ! H5I_DATATYPE_F - ! H5I_DATASPACE_F - ! H5I_DATASET_F - ! H5I_ATTR_F - ! H5I_BADID_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5iget_type_c(obj_id, TYPE) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IGET_TYPE_C':: h5iget_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(OUT) :: TYPE - END FUNCTION h5iget_type_c - END INTERFACE - hdferr = h5iget_type_c(obj_id, TYPE) - END SUBROUTINE h5iget_type_f - -!****s* H5I/h5iget_name_f -! -! NAME -! h5iget_name_f -! -! PURPOSE -! Gets a name of an object specified by its idetifier. -! -! INPUTS -! obj_id - attribute identifier -! buf_size - size of a buffer to read name in -! OUTPUTS -! buf - buffer to read name in, name will be truncated if -! buffer is not big enough -! name_size - name size -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! SOURCE - SUBROUTINE h5iget_name_f(obj_id, buf, buf_size, name_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER(SIZE_T), INTENT(IN) :: buf_size ! Buffer size - CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer to hold object name - INTEGER(SIZE_T), INTENT(OUT) :: name_size ! Actual name size - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 if successful, - ! -1 if fail -!***** - INTERFACE - INTEGER FUNCTION h5iget_name_c(obj_id, buf, buf_size, name_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IGET_NAME_C'::h5iget_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(OUT) :: buf - INTEGER(SIZE_T), INTENT(IN) :: buf_size - INTEGER(SIZE_T), INTENT(OUT) :: name_size - END FUNCTION h5iget_name_c - END INTERFACE - - hdferr = h5iget_name_c(obj_id, buf, buf_size, name_size) - END SUBROUTINE h5iget_name_f - -!****s* H5I/h5iinc_ref_f -! -! NAME -! h5iinc_ref_f -! -! PURPOSE -! Increments the reference count of an ID -! -! INPUTS -! obj_id - object identifier -! OUTPUTS -! ref_count - Current reference count of the ID -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Quincey Koziol -! December 9, 2003 -! -! SOURCE - SUBROUTINE h5iinc_ref_f(obj_id, ref_count, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5iinc_ref_c(obj_id, ref_count) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IINC_REF_C':: h5iinc_ref_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(OUT) :: ref_count - END FUNCTION h5iinc_ref_c - END INTERFACE - hdferr = h5iinc_ref_c(obj_id, ref_count) - END SUBROUTINE h5iinc_ref_f - -!****s* H5I/h5idec_ref_f -! -! NAME -! h5idec_ref_f -! -! PURPOSE -! Decrements the reference count of an ID -! -! INPUTS -! obj_id - Object identifier -! OUTPUTS -! ref_count - Current reference count of the ID -! hdferr: - Error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Quincey Koziol -! December 9, 2003 -! -! SOURCE - SUBROUTINE h5idec_ref_f(obj_id, ref_count, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5idec_ref_c(obj_id, ref_count) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IDEC_REF_C':: h5idec_ref_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(OUT) :: ref_count - END FUNCTION h5idec_ref_c - END INTERFACE - hdferr = h5idec_ref_c(obj_id, ref_count) - END SUBROUTINE h5idec_ref_f - -!****s* H5I/h5iget_ref_f -! NAME -! h5iget_ref_f -! -! PURPOSE -! Retrieves the reference count of an ID -! -! INPUTS -! obj_id - object identifier -! -! OUTPUTS -! ref_count - Current reference count of the ID -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Quincey Koziol -! December 9, 2003 -! -! SOURCE - SUBROUTINE h5iget_ref_f(obj_id, ref_count, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: ref_count ! Current reference count of ID - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5iget_ref_c(obj_id, ref_count) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IGET_REF_C':: h5iget_ref_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(OUT) :: ref_count - END FUNCTION h5iget_ref_c - END INTERFACE - hdferr = h5iget_ref_c(obj_id, ref_count) - END SUBROUTINE h5iget_ref_f -! -!****s* H5I/h5iget_file_id_f -! NAME -! h5iget_file_id_f -! -! PURPOSE -! Obtains file identifier from the object identifier -! -! INPUTS -! obj_id - object identifier -! OUTPUTS -! file_id - file identifier -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 23, 2004 -! SOURCE - SUBROUTINE h5iget_file_id_f(obj_id, file_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Object identifier - INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5iget_file_id_c(obj_id, file_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IGET_FILE_ID_C':: h5iget_file_id_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER(HID_T), INTENT(OUT) :: file_id - END FUNCTION h5iget_file_id_c - END INTERFACE - hdferr = h5iget_file_id_c(obj_id, file_id) - END SUBROUTINE h5iget_file_id_f -! -!****s* H5I/h5iis_valid_f -! NAME -! h5iget_file_id_f -! -! PURPOSE -! Check if an ID is valid without producing an error message -! -! INPUTS -! id - identifier -! OUTPUTS -! valid - status of id as a valid identifier -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! April 13, 2009 -! SOURCE - SUBROUTINE h5iis_valid_f(id, valid, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: id ! Identifier - LOGICAL, INTENT(OUT) :: valid ! Status of id as a valid identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: c_valid ! 0 = .false, 1 = .true. - - INTERFACE - INTEGER FUNCTION h5iis_valid_c(id, c_valid) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IIS_VALID_C':: h5iis_valid_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: id ! Identifier - INTEGER :: c_valid - END FUNCTION h5iis_valid_c - END INTERFACE - - hdferr = h5iis_valid_c(id, c_valid) - - valid = .FALSE. ! Default - IF(c_valid.EQ.1) valid = .TRUE. - - END SUBROUTINE h5iis_valid_f -END MODULE H5I - diff --git a/fortran/src/H5Lf.c b/fortran/src/H5Lf.c index 6523ab4..0d3aac2 100644 --- a/fortran/src/H5Lf.c +++ b/fortran/src/H5Lf.c @@ -1,6 +1,6 @@ /****h* H5Lf/H5Lf * PURPOSE - * This file contains C stubs for H5L Fortran APIs + * This file contains C stubs for H5L Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -26,34 +26,34 @@ /****if* H5Lf/h5lcopy_c * NAME - * h5lcopy_c + * h5lcopy_c * PURPOSE - * Call H5Lcopy + * Call H5Lcopy * INPUTS * - * src_loc_id - Location identifier of the source link - * src_name - Name of the link to be copied - * src_namelen - length of the name - * dest_loc_id - Location identifier specifying the destination of the copy - * dest_name - Name to be assigned to the NEW copy - * dest_namelen - Length of the name - * loc_id - Identifier of the file or group containing the object - * name - Name of the link to delete - * lcpl_id - Link creation property list identifier - * lapl_id - Link access property list identifier + * src_loc_id - Location identifier of the source link + * src_name - Name of the link to be copied + * src_namelen - length of the name + * dest_loc_id - Location identifier specifying the destination of the copy + * dest_name - Name to be assigned to the NEW copy + * dest_namelen - Length of the name + * loc_id - Identifier of the file or group containing the object + * name - Name of the link to delete + * lcpl_id - Link creation property list identifier + * lapl_id - Link access property list identifier * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5lcopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, +h5lcopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, _fcd dest_name, size_t_f *dest_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id) /******/ @@ -88,21 +88,21 @@ done: /****if* H5Lf/h5lcreate_external_c * NAME - * h5lcreate_external_c + * h5lcreate_external_c * PURPOSE - * Call H5Lcreate_external_c + * Call H5Lcreate_external_c * INPUTS * - * file_name - Name of the file containing the target object. Neither the file nor the target object is - * required to exist. May be the file the link is being created in. - * obj_name - Path within the target file to the target object. + * file_name - Name of the file containing the target object. Neither the file nor the target object is + * required to exist. May be the file the link is being created in. + * obj_name - Path within the target file to the target object. * link_loc_id - The file or group identifier for the new link. - * link_name - The name of the new link. - * lcpl_id - Link creation property list identifier. - * lapl_id - Link access property list identifier. + * link_name - The name of the new link. + * lcpl_id - Link creation property list identifier. + * lapl_id - Link access property list identifier. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * February 29, 2008 @@ -110,7 +110,7 @@ done: */ int_f -nh5lcreate_external_c(_fcd file_name, size_t_f *file_namelen, _fcd obj_name, size_t_f *obj_namelen, +h5lcreate_external_c(_fcd file_name, size_t_f *file_namelen, _fcd obj_name, size_t_f *obj_namelen, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id) /******/ @@ -150,27 +150,27 @@ done: /****if* H5Lf/h5ldelete_c * NAME - * h5ldelete_c + * h5ldelete_c * PURPOSE - * Call H5Ldelete + * Call H5Ldelete * INPUTS * * - * loc_id - Identifier of the file or group containing the object - * name - Name of the link to delete - * lapl_id - Link access property list identifier - * namelen - length of name + * loc_id - Identifier of the file or group containing the object + * name - Name of the link to delete + * lapl_id - Link access property list identifier + * namelen - length of name * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * SOURCE */ int_f -nh5ldelete_c ( hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id ) +h5ldelete_c ( hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id ) /******/ { char *c_name = NULL; @@ -197,28 +197,28 @@ done: /****if* H5Lf/h5lcreate_soft_c * NAME - * h5lcreate_soft_c + * h5lcreate_soft_c * PURPOSE - * Call H5Lcreate_soft + * Call H5Lcreate_soft * INPUTS * * - * target_path - Path to the target object, which is not required to exist. - * link_loc_id - The file or group identifier for the new link. - * link_name - The name of the new link. - * lcpl_id - Link creation property list identifier. - * lapl_id - Link access property list identifier. + * target_path - Path to the target object, which is not required to exist. + * link_loc_id - The file or group identifier for the new link. + * link_name - The name of the new link. + * lcpl_id - Link creation property list identifier. + * lapl_id - Link access property list identifier. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 20, 2008 + * February 20, 2008 * SOURCE */ int_f -nh5lcreate_soft_c(_fcd target_path, size_t_f *target_path_len, +h5lcreate_soft_c(_fcd target_path, size_t_f *target_path_len, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_name_len, hid_t_f *lcpl_id, hid_t_f *lapl_id ) @@ -253,29 +253,29 @@ nh5lcreate_soft_c(_fcd target_path, size_t_f *target_path_len, /****if* H5Lf/h5lcreate_hard_c * NAME - * h5lcreate_hard_c + * h5lcreate_hard_c * PURPOSE - * Call H5Lcreate_hard + * Call H5Lcreate_hard * INPUTS * - * obj_loc_id - The file or group identifier for the target object. - * obj_name - Name of the target object, which must already exist. - * obj_namelen - Name length - * link_loc_id - The file or group identifier for the new link. - * link_name - The name of the new link. - * link_namelen- Name length - * lcpl_id - Link creation property list identifier. - * lapl_id - Link access property list identifier. + * obj_loc_id - The file or group identifier for the target object. + * obj_name - Name of the target object, which must already exist. + * obj_namelen - Name length + * link_loc_id - The file or group identifier for the new link. + * link_name - The name of the new link. + * link_namelen- Name length + * lcpl_id - Link creation property list identifier. + * lapl_id - Link access property list identifier. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * February 27, 2008 * SOURCE */ int_f -nh5lcreate_hard_c(hid_t_f *obj_loc_id, _fcd obj_name, size_t_f *obj_namelen, +h5lcreate_hard_c(hid_t_f *obj_loc_id, _fcd obj_name, size_t_f *obj_namelen, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id ) @@ -310,41 +310,41 @@ nh5lcreate_hard_c(hid_t_f *obj_loc_id, _fcd obj_name, size_t_f *obj_namelen, /****if* H5Lf/h5ldelete_by_idx_c * NAME - * h5ldelete_by_idx_c + * h5ldelete_by_idx_c * PURPOSE - * Calls h5ldelete_by_idx + * Calls h5ldelete_by_idx * INPUTS * - * loc_id - File or group identifier specifying location of subject group - * group_name - Name of subject group - * group_namelen - Name length - * index_field - Type of index; Possible values are: + * loc_id - File or group identifier specifying location of subject group + * group_name - Name of subject group + * group_namelen - Name length + * index_field - Type of index; Possible values are: * H5_INDEX_UNKNOWN_F = -1 - Unknown index type * H5_INDEX_NAME_F - Index on names * H5_INDEX_CRT_ORDER_F - Index on creation order * H5_INDEX_N_F - Number of indices defined - * order - Order within field or index; Possible values are: + * order - Order within field or index; Possible values are: * H5_ITER_UNKNOWN_F - Unknown order * H5_ITER_INC_F - Increasing order * H5_ITER_DEC_F - Decreasing order * H5_ITER_NATIVE_F - No particular order, whatever is fastest * H5_ITER_N_F - Number of iteration orders - * n - Link for which to retrieve information - * lapl_id - Link access property list + * n - Link for which to retrieve information + * lapl_id - Link access property list * * OUTPUTS * N/A * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 29, 2008 + * February 29, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5ldelete_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +h5ldelete_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, hid_t_f *lapl_id) /******/ { @@ -376,28 +376,28 @@ done: /****if* H5Lf/h5lexists_c * NAME - * h5lexists_c + * h5lexists_c * PURPOSE - * Calls H5Lexists + * Calls H5Lexists * INPUTS * - * loc_id - Identifier of the file or group to query. - * name - Link name to check - * lapl_id - Link access property list identifier. + * loc_id - Identifier of the file or group to query. + * name - Link name to check + * lapl_id - Link access property list identifier. * OUTPUTS * - * link_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. + * link_exists_c - returns a positive value, for TRUE, or 0 (zero), for FALSE. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 29, 2008 + * February 29, 2008 * HISTORY * * SOURCE */ int_f -nh5lexists_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, int_f *link_exists) +h5lexists_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, int_f *link_exists) /******/ { char *c_name = NULL; /* Buffer to hold C string */ @@ -423,40 +423,40 @@ done: /****if* H5Lf/h5lget_info_c * NAME - * h5lget_info_c + * h5lget_info_c * PURPOSE - * Call H5Lget_info + * Call H5Lget_info * INPUTS * * link_loc_id - File or group identifier. - * link_name - Name of the link for which information is being sought - * link_namelen - Name length - * lapl_id - Link access property list + * link_name - Name of the link for which information is being sought + * link_namelen - Name length + * lapl_id - Link access property list * OUTPUTS * * - * cset - indicates the character set used for link’s name. - * corder - specifies the link’s creation order position. - * corder_valid - indicates whether the value in corder is valid. - * link_type - specifies the link class: + * cset - indicates the character set used for link’s name. + * corder - specifies the link’s creation order position. + * corder_valid - indicates whether the value in corder is valid. + * link_type - specifies the link class: * H5L_LINK_HARD_F - Hard link * H5L_LINK_SOFT_F - Soft link * H5L_LINK_EXTERNAL_F - External link * H5L_LINK_ERROR_F - Error - * address - If the link is a hard link, address specifies the file address that the link points to - * val_size - If the link is a symbolic link, val_size will be the length of the link value + * address - If the link is a hard link, address specifies the file address that the link points to + * val_size - If the link is a symbolic link, val_size will be the length of the link value * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5lget_info_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, +h5lget_info_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, int_f *cset, int_f *corder, int_f *corder_valid, int_f *link_type, haddr_t_f *address, size_t_f *val_size, hid_t_f *lapl_id) @@ -496,36 +496,36 @@ done: /****if* H5Lf/h5lget_info_by_idx_c * NAME - * h5lget_info_by_idx_c + * h5lget_info_by_idx_c * PURPOSE - * Call H5Lget_info_by_idx + * Call H5Lget_info_by_idx * INPUTS * * loc_id - File or group identifier specifying location of subject group - * group_name - Name of subject group - *group_namelen - Name length + * group_name - Name of subject group + * group_namelen - Name length * index_field - Index or field which determines the order - * order - Order within field or index - * n - Link for which to retrieve information - * lapl_id - Link access property list + * order - Order within field or index + * n - Link for which to retrieve information + * lapl_id - Link access property list * OUTPUTS * - * corder_valid - Indicates whether the the creation order data is valid for this attribute - * corder - Is a positive integer containing the creation order of the attribute - * cset - Indicates the character set used for the attribute’s name - * data_size - indicates the size, in the number of characters, of the attribute + * corder_valid - Indicates whether the the creation order data is valid for this attribute + * corder - Is a positive integer containing the creation order of the attribute + * cset - Indicates the character set used for the attribute’s name + * data_size - indicates the size, in the number of characters, of the attribute * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5lget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +h5lget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, int_f *link_type, int_f *corder_valid, int_f *corder, int_f *cset, haddr_t_f *address, size_t_f *val_size, hid_t_f *lapl_id) /******/ @@ -570,7 +570,7 @@ done: * NAME * H5Lis_registered_c * PURPOSE - * Call H5Lis_registered + * Call H5Lis_registered * INPUTS * * link_cls_id - User-defined link class identifier @@ -578,17 +578,17 @@ done: * NONE * * RETURNS - * Returns a positive value if the link class has been registered - * and zero if it is unregistered. Otherwise returns a negative value + * Returns a positive value if the link class has been registered + * and zero if it is unregistered. Otherwise returns a negative value * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * N/A * SOURCE */ int_f -nh5lis_registered_c(int_f *link_cls_id) +h5lis_registered_c(int_f *link_cls_id) /******/ { int_f ret_value; /* Return value */ @@ -621,29 +621,29 @@ nh5lis_registered_c(int_f *link_cls_id) /****if* H5Lf/h5lmove_c * NAME - * h5lmove_c + * h5lmove_c * PURPOSE - * Call H5Lmove + * Call H5Lmove * INPUTS * - * src_loc_id - Original file or group identifier. - * src_name - Original link name. - * src_namelen - name length - * dest_loc_id - Destination file or group identifier. - * dest_name - NEW link name. - * dest_namelen - name length + * src_loc_id - Original file or group identifier. + * src_name - Original link name. + * src_namelen - name length + * dest_loc_id - Destination file or group identifier. + * dest_name - NEW link name. + * dest_namelen - name length * OUTPUTS * * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * SOURCE */ int_f -nh5lmove_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, +h5lmove_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, _fcd dest_name, size_t_f *dest_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id) /******/ { @@ -682,17 +682,17 @@ done: * Call H5Lget_name_by_idx * INPUTS * - * loc_id - File or group identifier specifying location of subject group - * group_name - Name of subject group - * index_field - Index or field which determines the order - * order - Order within field or index - * n - Link for which to retrieve information - * size - Maximum number of characters of link value to be returned. - * lapl_id - Link access property list + * loc_id - File or group identifier specifying location of subject group + * group_name - Name of subject group + * index_field - Index or field which determines the order + * order - Order within field or index + * n - Link for which to retrieve information + * size - Maximum number of characters of link value to be returned. + * lapl_id - Link access property list * OUTPUTS * - * name - Buffer in which link value is returned - * size - The size of the link name on success + * name - Buffer in which link value is returned + * size - The size of the link name on success * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -701,7 +701,7 @@ done: * SOURCE */ int_f -nh5lget_name_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +h5lget_name_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, size_t_f *size, _fcd name, hid_t_f *lapl_id) /******/ @@ -774,7 +774,7 @@ done: /* * SOURCE */ /* *\/ */ /* int_f */ -/* nh5lget_val_c (hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, */ +/* h5lget_val_c (hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, */ /* size_t_f *size, _fcd linkval_buff, */ /* hid_t_f *lapl_id) */ /* { */ @@ -842,7 +842,7 @@ done: /* int_f */ -/* nh5lregistered_c(int_f *version, int_f *class_id, */ +/* h5lregistered_c(int_f *version, int_f *class_id, */ /* _fcd comment, size_t_f *comment_len, */ /* _fcd create_func, size_t_f *create_func_len, */ /* _fcd move_func, size_t_f *move_func_len, */ @@ -916,29 +916,29 @@ done: /****if* H5Lf/h5lget_val_c * NAME - * h5lget_val_c + * h5lget_val_c * PURPOSE - * Call H5Lget_val + * Call H5Lget_val * INPUTS * - * link_loc_id - File or group identifier. - * link_name - Link whose value is to be returned. - * link_name_len - length of link_name - * size - Maximum number of characters of link value to be returned. - * lapl_id - List access property list identifier + * link_loc_id - File or group identifier. + * link_name - Link whose value is to be returned. + * link_name_len - length of link_name + * size - Maximum number of characters of link value to be returned. + * lapl_id - List access property list identifier * OUTPUTS * - * linkval_buff - The buffer to hold the returned link value. + * linkval_buff - The buffer to hold the returned link value. * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * April 11, 2008 + * April 11, 2008 * SOURCE */ int_f -nh5lget_val_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, size_t_f *size, +h5lget_val_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, size_t_f *size, void *linkval_buff, hid_t_f *lapl_id) /******/ { @@ -971,16 +971,16 @@ done: * Calls H5Literate * INPUTS * - * group_id - Identifier specifying subject group - * index_type - Type of index which determines the order - * order - Order within index - * idx - Iteration position at which to start - * op - Callback function passing data regarding the link to the calling application - * op_data - User-defined pointer to data required by the application for its processing of the link + * group_id - Identifier specifying subject group + * index_type - Type of index which determines the order + * order - Order within index + * idx - Iteration position at which to start + * op - Callback function passing data regarding the link to the calling application + * op_data - User-defined pointer to data required by the application for its processing of the link * * OUTPUTS * - * idx - Position at which an interrupted iteration may be restarted + * idx - Position at which an interrupted iteration may be restarted * * RETURNS * >0 on success, 0< on failure @@ -1018,19 +1018,19 @@ h5literate_c(hid_t_f *group_id, int_f *index_type, int_f *order, hsize_t_f *idx, * Call H5Literate_by_name * INPUTS * - * loc_id - Identifier specifying subject group - * name - Name of subject group - * namelen - Name length - * index_type - Type of index which determines the order - * order - Order within index - * idx - Iteration position at which to start - * op - Callback function passing data regarding the link to the calling application - * op_data - User-defined pointer to data required by the application for its processing of the link - * lapl_id - List access property list identifier + * loc_id - Identifier specifying subject group + * name - Name of subject group + * namelen - Name length + * index_type - Type of index which determines the order + * order - Order within index + * idx - Iteration position at which to start + * op - Callback function passing data regarding the link to the calling application + * op_data - User-defined pointer to data required by the application for its processing of the link + * lapl_id - List access property list identifier * * OUTPUTS * - * idx - Position at which an interrupted iteration may be restarted + * idx - Position at which an interrupted iteration may be restarted * * RETURNS * >0 on success, 0< on failure diff --git a/fortran/src/H5Lff.F90 b/fortran/src/H5Lff.F90 new file mode 100644 index 0000000..bc91072 --- /dev/null +++ b/fortran/src/H5Lff.F90 @@ -0,0 +1,1478 @@ +!****h* ROBODoc/H5L +! +! NAME +! MODULE H5L +! +! PURPOSE +! This file contains Fortran interfaces for H5L functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5L function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5L + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_FUNPTR, C_CHAR, C_INT64_T, C_INT + USE H5GLOBAL + + IMPLICIT NONE + +!****t* H5L (F03)/h5l_info_t +! +! Fortran2003 Derived Type: +! + TYPE, bind(c) :: union_t + INTEGER(haddr_t) :: address + INTEGER(size_t) :: val_size + END TYPE union_t + + TYPE, bind(c) :: h5l_info_t + INTEGER(c_int) :: type ! H5L_type_t type +! LOGICAL(c_bool) :: corder_valid ! hbool_t corder_valid + INTEGER(c_int64_t) :: corder ! int64_t corder; + INTEGER(c_int) :: cset ! H5T_cset_t cset; + TYPE(union_t) :: u + END TYPE h5l_info_t + +!***** + +!type specifies the link class. Valid values include the following: +! H5L_TYPE_HARD Hard link +! H5L_TYPE_SOFT Soft link +! H5L_TYPE_EXTERNAL External link +! H5L_TYPE_ERROR Error +!cset specifies the character set in which the link name is encoded. Valid values include the following: +! H5T_CSET_ASCII US ASCII +! H5T_CSET_UTF8 UTF-8 Unicode encoding + +CONTAINS + +! +!****s* H5L/h5lcopy_f +! +! NAME +! h5lcopy_f +! +! PURPOSE +! Copies a link from one location to another. +! +! INPUTS +! src_loc_id - Location identifier of the source link +! src_name - Name of the link to be copied +! dest_loc_id - Location identifier specifying the destination of the copy +! dest_name - Name to be assigned to the NEW copy +! loc_id - Identifier of the file or group containing the object +! name - Name of the link to delete +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list identifier +! lapl_id - Link access property list identifier +! +! AUTHOR +! M. Scot Breitenfeld +! February 27, 2008 +! +! SOURCE + SUBROUTINE h5lcopy_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, & + lcpl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_loc_id ! Location identifier of the source link + CHARACTER(LEN=*), INTENT(IN) :: src_name ! Name of the link to be copied + INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Location identifier specifying the destination of the copy + CHARACTER(LEN=*), INTENT(IN) :: dest_name ! Name to be assigned to the NEW copy + + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier +!***** + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTEGER(SIZE_T) :: src_namelen + INTEGER(SIZE_T) :: dest_namelen + + INTERFACE + INTEGER FUNCTION h5lcopy_c(src_loc_id, src_name, src_namelen, dest_loc_id, dest_name, dest_namelen, & + lcpl_id_default, lapl_id_default) BIND(C,name='h5lcopy_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: src_name + INTEGER(HID_T), INTENT(IN) :: dest_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: dest_name + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTEGER(SIZE_T) :: src_namelen + INTEGER(SIZE_T) :: dest_namelen + END FUNCTION h5lcopy_c + END INTERFACE + + src_namelen = LEN(src_name) + dest_namelen = LEN(dest_name) + + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lcopy_c(src_loc_id, src_name, src_namelen, dest_loc_id, dest_name, dest_namelen, & + lcpl_id_default, lapl_id_default) + + END SUBROUTINE h5lcopy_f + +! +!****s* H5L/h5ldelete_f +! +! NAME +! h5ldelete_f +! +! PURPOSE +! Removes a link from a group. +! +! INPUTS +! loc_id - Identifier of the file or group containing the object +! name - Name of the link to delete +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list identifier +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! SOURCE + SUBROUTINE h5ldelete_f(loc_id, name, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier of the file or group containing the object + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the link to delete + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + + INTERFACE + INTEGER FUNCTION h5ldelete_c(loc_id, name, namelen, lapl_id_default) BIND(C,name='h5ldelete_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + END FUNCTION h5ldelete_c + END INTERFACE + + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5ldelete_c(loc_id, name, namelen, lapl_id_default) + + END SUBROUTINE h5ldelete_f + +! +!****s* H5L/H5Lcreate_soft_f +! +! NAME +! H5Lcreate_soft_f +! +! PURPOSE +! Creates a soft link to an object. +! +! INPUTS +! target_path - Path to the target object, which is not required to exist. +! link_loc_id - The file or group identifier for the new link. +! link_name - The name of the new link. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list identifier. +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! February 20, 2008 +! +! SOURCE + SUBROUTINE h5lcreate_soft_f(target_path, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: target_path ! Path to the target object, which is not required to exist. + INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. + CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. +!***** + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: target_path_len + INTEGER(SIZE_T) :: link_name_len + + INTERFACE + INTEGER FUNCTION h5lcreate_soft_c(target_path, target_path_len, & + link_loc_id, & + link_name,link_name_len, & + lcpl_id_default, lapl_id_default ) BIND(C,NAME='h5lcreate_soft_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: target_path + INTEGER(SIZE_T) :: target_path_len + INTEGER(HID_T), INTENT(IN) :: link_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: link_name + INTEGER(SIZE_T) :: link_name_len + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + END FUNCTION h5lcreate_soft_c + END INTERFACE + + target_path_len = LEN(target_path) + link_name_len = LEN(link_name) + + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lcreate_soft_c(target_path, target_path_len,& + link_loc_id, & + link_name, link_name_len, & + lcpl_id_default, lapl_id_default ) + + END SUBROUTINE h5lcreate_soft_f + +! +!****s* H5L/H5Lcreate_hard_f +! +! NAME +! H5Lcreate_hard_f +! +! PURPOSE +! Creates a hard link to an object. +! +! INPUTS +! +! obj_loc_id - The file or group identifier for the target object. +! obj_name - Name of the target object, which must already exist. +! link_loc_id - The file or group identifier for the new link. +! link_name - The name of the new link. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list identifier. +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! February 27, 2008 +! +! SOURCE + SUBROUTINE h5lcreate_hard_f(obj_loc_id, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_loc_id ! The file or group identifier for the target object. + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of the target object, which must already exist. + INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. + CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. + + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. +!***** + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: link_namelen + + INTERFACE + INTEGER FUNCTION h5lcreate_hard_c(obj_loc_id, obj_name, obj_namelen, & + link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) BIND(C,NAME='h5lcreate_hard_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(HID_T), INTENT(IN) :: link_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: link_name + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: link_namelen + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + END FUNCTION h5lcreate_hard_c + END INTERFACE + obj_namelen = LEN(obj_name) + link_namelen = LEN(link_name) + + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lcreate_hard_c(obj_loc_id, obj_name, obj_namelen, & + link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) + + END SUBROUTINE h5lcreate_hard_f + +! +!****s* H5L/H5Lcreate_external_f +! +! NAME +! H5Lcreate_external_f +! +! PURPOSE +! Creates a soft link to an object in a different file. +! +! INPUTS +! +! file_name - Name of the file containing the target object. Neither the file nor the target object is +! required to exist. May be the file the link is being created in. +! obj_name - Path within the target file to the target object. +! link_loc_id - The file or group identifier for the new link. +! link_name - The name of the new link. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list identifier. +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! February 27, 2008 +! SOURCE + SUBROUTINE h5lcreate_external_f(file_name, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: file_name ! Name of the file containing the target object. Neither + ! the file nor the target object is required to exist. + ! May be the file the link is being created in. + CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of the target object, which must already exist. + INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. + CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. + + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. +!***** + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTEGER(SIZE_T) :: file_namelen + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: link_namelen + + INTERFACE + INTEGER FUNCTION h5lcreate_external_c(file_name, file_namelen, obj_name, obj_namelen, & + link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) BIND(C,NAME='h5lcreate_external_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: file_name + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: obj_name + INTEGER(HID_T), INTENT(IN) :: link_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: link_name + INTEGER(SIZE_T) :: file_namelen + INTEGER(SIZE_T) :: obj_namelen + INTEGER(SIZE_T) :: link_namelen + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + END FUNCTION h5lcreate_external_c + END INTERFACE + file_namelen = LEN(file_name) + obj_namelen = LEN(obj_name) + link_namelen = LEN(link_name) + + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lcreate_external_c(file_name, file_namelen, obj_name, obj_namelen, & + link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) + + END SUBROUTINE h5lcreate_external_f + +! +!****s* H5L/h5ldelete_by_idx_f +! +! NAME +! h5ldelete_by_idx_f +! +! PURPOSE +! Removes the nth link in a group. +! INPUTS +! loc_id - File or group identifier specifying location of subject group +! group_name - Name of subject group +! index_field - Type of index; Possible values are: +! H5_INDEX_UNKNOWN_F = -1 - Unknown index type +! H5_INDEX_NAME_F - Index on names +! H5_INDEX_CRT_ORDER_F - Index on creation order +! H5_INDEX_N_F - Number of indices defined +! +! order - Order within field or index; Possible values are: +! H5_ITER_UNKNOWN_F - Unknown order +! H5_ITER_INC_F - Increasing order +! H5_ITER_DEC_F - Decreasing order +! H5_ITER_NATIVE_F - No particular order, whatever is fastest +! H5_ITER_N_F - Number of iteration orders +! +! n - Link for which to retrieve information +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! February 29, 2008 +! SOURCE + SUBROUTINE h5ldelete_by_idx_f(loc_id, group_name, index_field, order, n, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached + CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of object, relative to location, + ! from which attribute is to be removed + INTEGER, INTENT(IN) :: index_field ! Type of index; Possible values are: + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + ! H5_ITER_N_F - Number of iteration orders + INTEGER(HSIZE_T), INTENT(IN) :: n ! Offset within index + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: group_namelen + + INTERFACE + INTEGER FUNCTION h5ldelete_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, lapl_id_default) & + BIND(C,NAME='h5ldelete_by_idx_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER, INTENT(IN) :: index_field + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: group_namelen + END FUNCTION h5ldelete_by_idx_c + END INTERFACE + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + group_namelen = LEN(group_name) + hdferr = h5ldelete_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, lapl_id_default) + + END SUBROUTINE h5ldelete_by_idx_f + +! +!****s* H5L/H5Lexists_f +! +! NAME +! H5Lexists_f +! +! PURPOSE +! Check if a link with a particular name exists in a group. +! +! INPUTS +! loc_id - Identifier of the file or group to query. +! name - Link name to check +! +! OUTPUTS +! link_exists - link exists status (.TRUE.,.FALSE.) +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! February 29, 2008 +! +! SOURCE + SUBROUTINE h5lexists_f(loc_id, name, link_exists, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier of the file or group to query. + CHARACTER(LEN=*), INTENT(IN) :: name ! Link name to check. + LOGICAL, INTENT(OUT) :: link_exists ! .TRUE. if exists, .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id + ! Link access property list identifier. +!***** + INTEGER :: link_exists_c + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + + INTERFACE + INTEGER FUNCTION h5lexists_c(loc_id, name, namelen, lapl_id_default, link_exists_c) & + BIND(C,NAME='h5lexists_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T), INTENT(IN) :: namelen + INTEGER, INTENT(OUT) :: link_exists_c + INTEGER(HID_T) :: lapl_id_default + + END FUNCTION h5lexists_c + END INTERFACE + + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lexists_c(loc_id, name, namelen, lapl_id_default, link_exists_c) + + link_exists = .FALSE. + IF(link_exists_c.GT.0) link_exists = .TRUE. + + END SUBROUTINE h5lexists_f + +! +!****s* H5L/h5lget_info_f +! +! NAME +! h5lget_info_f +! +! PURPOSE +! Returns information about a link. +! +! INPUTS +! link_loc_id - File or group identifier. +! link_name - Name of the link for which information is being sought +! +! OUTPUTS +! NOTE: In C these are contained in the structure H5L_info_t +! +! cset - indicates the character set used for link’s name. +! corder - specifies the link’s creation order position. +! corder_valid - indicates whether the value in corder is valid. +! link_type - specifies the link class: +! H5L_TYPE_HARD_F - Hard link +! H5L_TYPE_SOFT_F - Soft link +! H5L_TYPE_EXTERNAL_F - External link +! H5L_TYPE_ERROR_ F - Error +! address - If the link is a hard link, address specifies the file address that the link points to +! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., +! the length of the name of the pointed-to object with a null terminator. +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! February 29, 2008 +! +! HISTORY +! Changed the link_type names to match those in C (bug 1720) from, +! H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F +! to +! H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F +! MSB January 8, 2010. +! +! SOURCE + SUBROUTINE h5lget_info_f(link_loc_id, link_name, & + cset, corder, f_corder_valid, link_type, address, val_size, & + hdferr, lapl_id) + IMPLICIT NONE + + INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. + CHARACTER(LEN=*), INTENT(IN) :: link_name ! Name of the link for which information is being sought + +! OUTPUTS NOTE: In C these are contained in the structure H5L_info_t + INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the link’s name. + INTEGER, INTENT(OUT) :: corder ! Specifies the link’s creation order position. + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the value in corder is valid. + INTEGER, INTENT(OUT) :: link_type ! Specifies the link class: + ! H5L_TYPE_HARD_F - Hard link + ! H5L_TYPE_SOFT_F - Soft link + ! H5L_TYPE_EXTERNAL_F - External link + ! H5L_TYPE_ERROR _F - Error + INTEGER(HADDR_T), INTENT(OUT) :: address ! If the link is a hard link, address specifies the file address that the link points to + INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., + ! the length of the name of the pointed-to object with a null terminator. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER(SIZE_T) :: link_namelen + INTEGER(HID_T) :: lapl_id_default + INTEGER :: corder_valid + + INTERFACE + INTEGER FUNCTION h5lget_info_c(link_loc_id, link_name, link_namelen, & + cset, corder, corder_valid, link_type, address, val_size, & + lapl_id_default) BIND(C,NAME='h5lget_info_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T, HADDR_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: link_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: link_name + INTEGER, INTENT(OUT) :: cset + INTEGER, INTENT(OUT) :: corder + INTEGER, INTENT(OUT) :: link_type + INTEGER(HADDR_T), INTENT(OUT) :: address + INTEGER(SIZE_T), INTENT(OUT) :: val_size + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: link_namelen + INTEGER :: corder_valid + END FUNCTION h5lget_info_c + END INTERFACE + + link_namelen = LEN(link_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lget_info_c(link_loc_id, link_name, link_namelen, & + cset, corder, corder_valid, link_type, & + address, val_size, & + lapl_id_default) + + f_corder_valid =.FALSE. + IF(corder_valid .EQ. 1) f_corder_valid =.TRUE. + + END SUBROUTINE h5lget_info_f + +! +!****s* H5L/h5lget_info_by_idx_f +! +! NAME +! h5lget_info_by_idx_f +! +! PURPOSE +! Retrieves metadata for a link in a group, according to the order within a field or index. +! +! INPUTS +! loc_id - File or group identifier specifying location of subject group +! group_name - Name of subject group +! index_field - Index or field which determines the order +! order - Order within field or index +! n - Link for which to retrieve information +! +! OUTPUTS +! NOTE: In C these are defined as a structure: H5L_info_t +! corder_valid - Indicates whether the creation order data is valid for this attribute +! corder - Is a positive integer containing the creation order of the attribute +! cset - Indicates the character set used for the attribute’s name +! address - If the link is a hard link, address specifies the file address that the link points to +! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., +! the length of the name of the pointed-to object with a null terminator. +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! February 29, 2008 +! +! HISTORY +! Changed the link_type names to match those in C (bug 1720) from, +! H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F +! to +! H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F +! MSB January 8, 2010. +! +! SOURCE + SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, & + link_type, f_corder_valid, corder, cset, address, val_size, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group + CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group + INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index + INTEGER, INTENT(OUT) :: link_type ! Specifies the link class: + ! H5L_TYPE_HARD_F - Hard link + ! H5L_TYPE_SOFT_F - Soft link + ! H5L_TYPE_EXTERNAL_F - External link + ! H5L_TYPE_ERROR _F - Error + LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute + INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute + INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name + INTEGER(HADDR_T), INTENT(OUT) :: address ! If the link is a hard link, address specifies the file address that the link points to + INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., + ! the length of the name of the pointed-to object with a null terminator. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!***** + INTEGER :: corder_valid + INTEGER(SIZE_T) :: group_namelen + INTEGER(HID_T) :: lapl_id_default + +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & + link_type, corder_valid, corder, cset, address, val_size, lapl_id_default) & + BIND(C,NAME='h5lget_info_by_idx_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T, HSIZE_T, HADDR_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER(SIZE_T) :: group_namelen + INTEGER, INTENT(IN) :: index_field + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER, INTENT(OUT) :: link_type + INTEGER :: corder_valid + INTEGER, INTENT(OUT) :: corder + INTEGER, INTENT(OUT) :: cset + INTEGER(HADDR_T), INTENT(OUT) :: address + INTEGER(SIZE_T), INTENT(OUT) :: val_size + INTEGER(HID_T) :: lapl_id_default + END FUNCTION h5lget_info_by_idx_c + END INTERFACE + + group_namelen = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & + link_type, corder_valid, corder, cset, address, val_size, lapl_id_default) + + f_corder_valid =.FALSE. + IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. + + END SUBROUTINE h5lget_info_by_idx_f + +! +!****s* H5L/h5lis_registered_f +! +! NAME +! h5lis_registered_f +! +! PURPOSE +! Determines whether a class of user-defined links is registered. +! +! INPUTS +! link_cls_id - User-defined link class identifier +! +! OUTPUTS +! registered - .TRUE. - if the link class has been registered +! .FALSE. - if it is unregistered +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 29, 2008 +! +! SOURCE + SUBROUTINE h5lis_registered_f(link_cls_id, registered, hdferr) + IMPLICIT NONE + INTEGER, INTENT(IN) :: link_cls_id ! User-defined link class identifier + LOGICAL, INTENT(OUT) :: registered ! .TRUE. - if the link class has been registered and + ! .FALSE. - if it is unregistered + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5lis_registered_c(link_cls_id) BIND(C,NAME='h5lis_registered_c') + IMPLICIT NONE + INTEGER, INTENT(IN) :: link_cls_id ! User-defined link class identifier + END FUNCTION h5lis_registered_c + END INTERFACE + + hdferr = h5lis_registered_c(link_cls_id) + + IF(hdferr.GT.0)THEN + registered = .TRUE. + ELSE IF(hdferr.EQ.0)THEN + registered = .FALSE. + ENDIF + + END SUBROUTINE h5lis_registered_f + +! +!****s* H5L/h5lmove_f +! +! NAME +! h5lmove_f +! +! PURPOSE +! Renames a link within an HDF5 file. +! +! INPUTS +! src_loc_id - Original file or group identifier. +! src_name - Original link name. +! dest_loc_id - Destination file or group identifier. +! dest_name - NEW link name. +! +! OUTPUTS +! hdferr - Error code: +! 0 on success and -1 on failure +! +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list identifier to be associated WITH the NEW link. +! lapl_id - Link access property list identifier to be associated WITH the NEW link. +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! SOURCE + SUBROUTINE h5lmove_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, lcpl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_loc_id ! Original file or group identifier. + CHARACTER(LEN=*), INTENT(IN) :: src_name ! Original link name. + INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Destination file or group identifier. + CHARACTER(LEN=*), INTENT(IN) :: dest_name ! NEW link name. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier + ! to be associated WITH the NEW link. + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier + ! to be associated WITH the NEW link. +!***** + INTEGER(SIZE_T) :: src_namelen + INTEGER(SIZE_T) :: dest_namelen + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5lmove_c(src_loc_id, src_name, src_namelen, dest_loc_id, & + dest_name, dest_namelen, lcpl_id_default, lapl_id_default) BIND(C,NAME='h5lmove_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_loc_id + + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: src_name + INTEGER(SIZE_T) :: src_namelen + INTEGER(HID_T), INTENT(IN) :: dest_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: dest_name + INTEGER(SIZE_T) :: dest_namelen + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: lapl_id_default + + END FUNCTION h5lmove_c + END INTERFACE + + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + src_namelen = LEN(src_name) + dest_namelen = LEN(dest_name) + + hdferr = H5Lmove_c(src_loc_id, src_name, src_namelen, dest_loc_id, & + dest_name, dest_namelen, lcpl_id_default, lapl_id_default) + + END SUBROUTINE h5lmove_f + +! +!****s* H5L/h5lget_name_by_idx_f +! +! NAME +! h5lget_name_by_idx_f +! +! PURPOSE +! Retrieves name of the nth link in a group, according to the order within a specified field or index. +! +! INPUTS +! loc_id - File or group identifier specifying location of subject group +! group_name - Name of subject group +! index_field - Index or field which determines the order +! order - Order within field or index +! n - Link for which to retrieve information +! +! OUTPUTS +! name - Buffer in which link value is returned +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! lapl_id - List access property list identifier. +! size - Maximum number of characters of link value to be returned. +! +! AUTHOR +! M. Scot Breitenfeld +! March 10, 2008 +! +! SOURCE + SUBROUTINE h5lget_name_by_idx_f(loc_id, group_name, index_field, order, n, & + name, hdferr, size, lapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group + CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group + INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order + ! H5_INDEX_UNKNOWN_F - Unknown index type + ! H5_INDEX_NAME_F - Index on names + ! H5_INDEX_CRT_ORDER_F - Index on creation order + ! H5_INDEX_N_F - Number of indices defined + INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: + ! H5_ITER_UNKNOWN_F - Unknown order + ! H5_ITER_INC_F - Increasing order + ! H5_ITER_DEC_F - Decreasing order + ! H5_ITER_NATIVE_F - No particular order, whatever is fastest + INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index + CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer in which link value is returned + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTEGER(SIZE_T) :: group_namelen + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, of the link + INTEGER(SIZE_T) :: size_default + + INTERFACE + INTEGER FUNCTION h5lget_name_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & + size_default, name, lapl_id_default) BIND(C,NAME='h5lget_name_by_idx_c') + IMPORT :: c_char + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER(SIZE_T) :: group_namelen + INTEGER, INTENT(IN) :: index_field + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(SIZE_T) :: size_default + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + INTEGER(HID_T) :: lapl_id_default + END FUNCTION h5lget_name_by_idx_c + END INTERFACE + + group_namelen = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + size_default = LEN(name) + + hdferr = h5lget_name_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & + size_default, name, lapl_id_default) + + IF(PRESENT(size)) size = size_default + + + END SUBROUTINE h5lget_name_by_idx_f + + +! HAS PROBLEM WITH void pointer in C +!!$! +!!$!****s* H5L/ +!!$! +!!$! NAME +!!$! h5lget_val_by_idx_f +!!$! +!!$! PURPOSE +!!$! Returns the link value of a link, according to the order of +!!$! an index. For symbolic links, this is the path to which the +!!$! link points, including the null terminator. For user-defined +!!$! links, it is the link buffer. +!!$! INPUTS +!!$! loc_id - File or group identifier specifying location of subject group +!!$! group_name - Name of subject group +!!$! index_field - Index or field which determines the order +!!$! order - Order within field or index +!!$! n - Link for which to retrieve information +!!$! size - Maximum number of characters of link value to be returned. +!!$! +!!$! OUTPUTS NOTE: In C these are defined as a structure: H5L_info_t +!!$! corder_valid - indicates whether the creation order data is valid for this attribute +!!$! corder - is a positive integer containing the creation order of the attribute +!!$! cset - indicates the character set used for the attribute’s name +!!$! data_size - indicates the size, in the number of characters, of the attribute +!!$! hdferr - error code +!!$! Success: 0 +!!$! Failure: -1 +!!$! OPTIONAL PARAMETERS +!!$! lapl_id - List access property list identifier. +!!$! +!!$! AUTHOR +!!$! M. Scot Breitenfeld +!!$! March 3, 2008 +!!$! +!!$! HISTORY N/A +!!$! +!!$! +!!$! SOURCE +!!$ SUBROUTINE h5lget_val_by_idx_f(loc_id, group_name, index_field, order, n, & +!!$ f_corder_valid, corder, cset, data_size, hdferr, lapl_id) +!!$ IMPLICIT NONE +!!$ INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group +!!$ CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group +!!$ INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order +!!$ ! H5_INDEX_UNKNOWN_F - Unknown index type +!!$ ! H5_INDEX_NAME_F - Index on names +!!$ ! H5_INDEX_CRT_ORDER_F - Index on creation order +!!$ ! H5_INDEX_N_F - Number of indices defined +!!$ INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: +!!$ ! H5_ITER_UNKNOWN_F - Unknown order +!!$ ! H5_ITER_INC_F - Increasing order +!!$ ! H5_ITER_DEC_F - Decreasing order +!!$ ! H5_ITER_NATIVE_F - No particular order, whatever is fastest +!!$ INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index +!!$ LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute +!!$ INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute +!!$ INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name +!!$ INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute +!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: +!!$ ! 0 on success and -1 on failure +!!$ INTEGER :: corder_valid +!!$ INTEGER(SIZE_T) :: group_namelen +!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!!$ INTEGER(HID_T) :: lapl_id_default +!!$ +!!$ INTERFACE +!!$ INTEGER FUNCTION h5lget_val_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & +!!$ corder_valid, corder, cset, data_size, lapl_id_default) +!!$ USE H5GLOBAL +!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) +!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_VAL_BY_IDX_C'::h5lget_val_by_idx_c +!!$ !DEC$ENDIF +!!$ INTEGER(HID_T), INTENT(IN) :: loc_id +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name +!!$ INTEGER(SIZE_T) :: group_namelen +!!$ INTEGER, INTENT(IN) :: index_field +!!$ INTEGER, INTENT(IN) :: order +!!$ INTEGER(HSIZE_T), INTENT(IN) :: n +!!$ INTEGER :: corder_valid +!!$ INTEGER, INTENT(OUT) :: corder +!!$ INTEGER, INTENT(OUT) :: cset +!!$ INTEGER(HSIZE_T), INTENT(OUT) :: data_size +!!$ INTEGER(HID_T) :: lapl_id_default +!!$ END FUNCTION h5lget_val_by_idx_c +!!$ END INTERFACE +!!$ +!!$ group_namelen = LEN(group_name) +!!$ +!!$ lapl_id_default = H5P_DEFAULT_F +!!$ IF(PRESENT(lapl_id)) lapl_id_default = lapl_id +!!$ +!!$ hdferr = h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & +!!$ corder_valid, corder, cset, data_size, lapl_id_default) +!!$ +!!$ f_corder_valid =.FALSE. +!!$ IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. +!!$ +!!$ END SUBROUTINE h5lget_val_by_idx_f + +!!$! +!!$!****s* H5L/h5lget_val_f +!!$! +!!$! NAME +!!$! h5lget_val_f +!!$! +!!$! PURPOSE +!!$! Returns the value of a symbolic link. +!!$! +!!$! INPUTS +!!$! link_loc_id - File or group identifier. +!!$! link_name - Link whose value is to be returned. +!!$! size - Maximum number of characters of link value to be returned. +!!$! +!!$! OUTPUTS +!!$! linkval_buff - The buffer to hold the returned link value. +!!$! hdferr - error code +!!$! Success: 0 +!!$! Failure: -1 +!!$! OPTIONAL PARAMETERS +!!$! lapl_id - List access property list identifier. +!!$! +!!$! AUTHOR +!!$! M. Scot Breitenfeld +!!$! March 3, 2008 +!!$! SOURCE +!!$ SUBROUTINE h5lget_val_f(link_loc_id, link_name, size, linkval_buff, & +!!$ hdferr, lapl_id) +!!$ IMPLICIT NONE +!!$ INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. +!!$ CHARACTER(LEN=*), INTENT(IN) :: link_name ! Link whose value is to be returned. +!!$ INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of characters of link value to be returned. +!!$ +!!$ CHARACTER(LEN=size), INTENT(OUT) :: linkval_buff ! The buffer to hold the returned link value. +!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: +!!$ ! 0 on success and -1 on failure +!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list +!!$ +!!$ INTEGER :: link_namelen +!!$ INTEGER(HID_T) :: lapl_id_default +!!$ INTEGER :: corder_valid +!!$ +!!$ INTEGER :: link_namelen +!!$ INTEGER(HID_T) :: lapl_id_default +!!$ +!!$! MS FORTRAN needs explicit interface for C functions called here. +!!$! +!!$ INTERFACE +!!$ INTEGER FUNCTION h5lget_val_c(link_loc_id, link_name, link_namelen, size, linkval_buff, & +!!$ lapl_id_default) +!!$ USE H5GLOBAL +!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) +!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_VAL_C'::h5lget_val_c +!!$ !DEC$ENDIF +!!$ INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: link_name ! Link whose value is to be returned. +!!$ INTEGER :: link_namelen +!!$ INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of characters of link value to be returned. +!!$ +!!$ CHARACTER(LEN=size), INTENT(OUT) :: linkval_buff ! The buffer to hold the returned link value. +!!$ +!!$ INTEGER :: link_namelen +!!$ INTEGER(HID_T) :: lapl_id_default +!!$ +!!$ END FUNCTION h5lget_val_c +!!$ END INTERFACE +!!$ +!!$ link_namelen = LEN(link_name) +!!$ +!!$ lapl_id_default = H5P_DEFAULT_F +!!$ IF(PRESENT(lapl_id)) lapl_id_default = lapl_id +!!$ +!!$ hdferr = h5lget_val_c(link_loc_id, link_name, link_namelen, size, linkval_buff, & +!!$ lapl_id_default) +!!$ +!!$ END SUBROUTINE h5lget_val_f + +!!$! +!!$!****s* H5L/H5Lregistered_f +!!$! +!!$! NAME +!!$! H5Lregistered_f +!!$! +!!$! PURPOSE +!!$! Registers user-defined link class or changes behavior of existing class. +!!$! +!!$! INPUTS NOTE: In C the following represents struct H5L_class_t: +!!$! version - Version number of this struct +!!$! class_id - Link class identifier +!!$! comment - Comment for debugging +!!$! create_func - Callback during link creation +!!$! move_func - Callback after moving link +!!$! copy_func - Callback after copying link +!!$! trav_func - The main traversal function +!!$! del_func - Callback for link deletion +!!$! query_func - Callback for queries +!!$! +!!$! OUTPUTS +!!$! hdferr - Error code +!!$! Success: 0 +!!$! Failure: -1 +!!$! OPTIONAL PARAMETERS +!!$! None +!!$! +!!$! AUTHOR +!!$! M. Scot Breitenfeld +!!$! February 29, 2008 +!!$! +!!$! HISTORY N/A +!!$! +!!$! +!!$! SOURCE +!!$ SUBROUTINE H5Lregistered_f(version, class_id, comment, create_func, & +!!$ move_func, copy_func, trav_func, del_func, query_func, hdferr) +!!$ IMPLICIT NONE +!!$ INTEGER, INTENT(IN) :: version ! Version number of this struct +!!$ INTEGER, INTENT(IN) :: class_id ! Link class identifier +!!$ CHARACTER(LEN=*), INTENT(IN) :: comment ! Comment for debugging +!!$ CHARACTER(LEN=*), INTENT(IN) :: create_func ! Callback during link creation +!!$ CHARACTER(LEN=*), INTENT(IN) :: move_func ! Callback after moving link +!!$ CHARACTER(LEN=*), INTENT(IN) :: copy_func ! Callback after copying link +!!$ CHARACTER(LEN=*), INTENT(IN) :: trav_func ! The main traversal function +!!$ CHARACTER(LEN=*), INTENT(IN) :: del_func ! Callback for link deletion +!!$ CHARACTER(LEN=*), INTENT(IN) :: query_func ! Callback for queries +!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: +!!$ ! 0 on success and -1 on failure +!!$ INTEGER :: comment_len +!!$ INTEGER :: create_func_len +!!$ INTEGER :: move_func_len +!!$ INTEGER :: copy_func_len +!!$ INTEGER :: trav_func_len +!!$ INTEGER :: del_func_len +!!$ INTEGER :: query_func_len +!!$ +!!$ INTERFACE +!!$ INTEGER FUNCTION H5Lregistered_c(version, class_id, comment, & +!!$ create_func, create_func_len, & +!!$ move_func, move_func_len, & +!!$ copy_func, copy_func_len, & +!!$ trav_func, trav_func_len, & +!!$ del_func, del_func_len, & +!!$ query_func,query_func_len) +!!$ USE H5GLOBAL +!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) +!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LREGISTERED_C'::H5Lregistered_c +!!$ !DEC$ENDIF +!!$ INTEGER, INTENT(IN) :: version ! Version number of this struct +!!$ INTEGER, INTENT(IN) :: class_id ! Link class identifier +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: comment ! Comment for debugging +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: create_func ! Callback during link creation +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: move_func ! Callback after moving link +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: copy_func ! Callback after copying link +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: trav_func ! The main traversal function +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: del_func ! Callback for link deletion +!!$ CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: query_func ! Callback for queries +!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: +!!$ ! 0 on success and -1 on failure +!!$ INTEGER :: comment_len +!!$ INTEGER :: create_func_len +!!$ INTEGER :: move_func_len +!!$ INTEGER :: copy_func_len +!!$ INTEGER :: trav_func_len +!!$ INTEGER :: del_func_len +!!$ INTEGER :: query_func_len +!!$ +!!$ END FUNCTION H5Lregistered_c +!!$ END INTERFACE +!!$ +!!$ comment_len = LEN(comment) +!!$ create_func_len = LEN(create_func) +!!$ move_func_len = LEN(move_func) +!!$ copy_func_len = LEN(copy_func) +!!$ trav_func_len = LEN(trav_func) +!!$ del_func_len = LEN(del_func) +!!$ query_func_len = LEN(query_func) +!!$ +!!$ hdferr = H5Lregistered_c(version, class_id, comment, & +!!$ create_func, create_func_len, & +!!$ move_func, move_func_len, & +!!$ copy_func, copy_func_len, & +!!$ trav_func, trav_func_len, & +!!$ del_func, del_func_len, & +!!$ query_func, query_func_len) +!!$ +!!$ END SUBROUTINE H5Lregistered_f + +!****s* H5L (F03)/h5literate_f +! +! NAME +! h5literate_f +! +! PURPOSE +! Iterates through links in a group. +! +! Inputs: +! group_id - Identifier specifying subject group +! index_type - Type of index which determines the order: +! H5_INDEX_NAME_F - Alpha-numeric index on name +! H5_INDEX_CRT_ORDER_F - Index on creation order +! order - Order within index: +! H5_ITER_INC_F - Increasing order +! H5_ITER_DEC_F - Decreasing order +! H5_ITER_NATIVE_F - Fastest available order +! idx - IN: Iteration position at which to start +! op - Callback function passing data regarding the link to the calling application +! op_data - User-defined pointer to data required by the application for its processing of the link +! +! Outputs: +! idx - OUT: Position at which an interrupted iteration may be restarted +! return_value - Success: The return value of the first operator that +! returns non-zero, or zero if all members were +! processed with no operator returning non-zero. +! +! Failure: Negative if something goes wrong within the +! library, or the negative value returned by one +! of the operators. +! +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! July 8, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5literate_f(group_id, index_type, order, idx, op, op_data, return_value, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: group_id + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(INOUT) :: idx + TYPE(C_FUNPTR) , INTENT(IN) :: op + TYPE(C_PTR) , INTENT(IN) :: op_data + INTEGER , INTENT(OUT) :: return_value + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5literate_c(group_id, index_type, order, idx, op, op_data) & + BIND(C, NAME='h5literate_c') + IMPORT :: c_ptr, c_funptr + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: group_id + INTEGER, INTENT(IN) :: index_type + INTEGER, INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(INOUT) :: idx + TYPE(C_FUNPTR), VALUE :: op + TYPE(C_PTR), VALUE :: op_data + END FUNCTION h5literate_c + END INTERFACE + + return_value = h5literate_c(group_id, index_type, order, idx, op, op_data) + + IF(return_value.GE.0)THEN + hdferr = 0 + ELSE + hdferr = -1 + END IF + + END SUBROUTINE h5literate_f + +!****s* H5L (F03)/h5literate_by_name_f +! +! NAME +! h5literate_by_name_f +! +! PURPOSE +! Iterates through links in a group. +! +! Inputs: +! loc_id - File or group identifier specifying location of subject group +! group_name - Name of subject group +! index_type - Type of index which determines the order: +! H5_INDEX_NAME_F - Alpha-numeric index on name +! H5_INDEX_CRT_ORDER_F - Index on creation order +! order - Order within index: +! H5_ITER_INC_F - Increasing order +! H5_ITER_DEC_F - Decreasing order +! H5_ITER_NATIVE_F - Fastest available order +! idx - IN: Iteration position at which to start +! op - Callback function passing data regarding the link to the calling application +! op_data - User-defined pointer to data required by the application for its processing of the link +! +! Outputs: +! idx - OUT: Position at which an interrupted iteration may be restarted +! return_value - Success: The return value of the first operator that +! returns non-zero, or zero if all members were +! processed with no operator returning non-zero. +! +! Failure: Negative if something goes wrong within the +! library, or the negative value returned by one +! of the operators. +! +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! lapl_id - Link access property list +! +! AUTHOR +! M. Scot Breitenfeld +! Augest 18, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5literate_by_name_f(loc_id, group_name, index_type, order, & + idx, op, op_data, return_value, hdferr, lapl_id) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: group_name + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(INOUT) :: idx + TYPE(C_FUNPTR) , INTENT(IN) :: op + TYPE(C_PTR) , INTENT(IN) :: op_data + INTEGER , INTENT(OUT) :: return_value + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + + INTERFACE + INTEGER FUNCTION h5literate_by_name_c(loc_id, name, namelen, index_type, order,& + idx, op, op_data, lapl_id_default) BIND(C, NAME='h5literate_by_name_c') + IMPORT :: c_char, c_ptr, c_funptr + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) , INTENT(IN) :: namelen + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(INOUT) :: idx + TYPE(C_FUNPTR), VALUE :: op + TYPE(C_PTR), VALUE :: op_data + INTEGER(HID_T) , INTENT(IN) :: lapl_id_default + END FUNCTION + END INTERFACE + + namelen = LEN(group_name) + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + return_value = h5literate_by_name_c(loc_id, group_name, namelen, index_type, order, idx, op, op_data, lapl_id_default) + + IF(return_value.GE.0)THEN + hdferr = 0 + ELSE + hdferr = -1 + END IF + + END SUBROUTINE h5literate_by_name_f + +END MODULE H5L diff --git a/fortran/src/H5Lff.f90 b/fortran/src/H5Lff.f90 deleted file mode 100644 index 4660e52..0000000 --- a/fortran/src/H5Lff.f90 +++ /dev/null @@ -1,1300 +0,0 @@ -!****h* ROBODoc/H5L -! -! NAME -! MODULE H5L -! -! PURPOSE -! This file contains Fortran interfaces for H5L functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5L function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5L - - USE H5GLOBAL - -CONTAINS - -! -!****s* H5L/h5lcopy_f -! -! NAME -! h5lcopy_f -! -! PURPOSE -! Copies a link from one location to another. -! -! INPUTS -! src_loc_id - Location identifier of the source link -! src_name - Name of the link to be copied -! dest_loc_id - Location identifier specifying the destination of the copy -! dest_name - Name to be assigned to the NEW copy -! loc_id - Identifier of the file or group containing the object -! name - Name of the link to delete -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list identifier -! lapl_id - Link access property list identifier -! -! AUTHOR -! M. Scot Breitenfeld -! February 27, 2008 -! -! SOURCE - SUBROUTINE h5lcopy_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, & - lcpl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: src_loc_id ! Location identifier of the source link - CHARACTER(LEN=*), INTENT(IN) :: src_name ! Name of the link to be copied - INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Location identifier specifying the destination of the copy - CHARACTER(LEN=*), INTENT(IN) :: dest_name ! Name to be assigned to the NEW copy - - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier -!***** - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTEGER(SIZE_T) :: src_namelen - INTEGER(SIZE_T) :: dest_namelen - - INTERFACE - INTEGER FUNCTION h5lcopy_c(src_loc_id, src_name, src_namelen, dest_loc_id, dest_name, dest_namelen, & - lcpl_id_default, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LCOPY_C'::h5lcopy_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: src_name, dest_name - INTEGER(HID_T), INTENT(IN) :: src_loc_id - CHARACTER(LEN=*), INTENT(IN) :: src_name - INTEGER(HID_T), INTENT(IN) :: dest_loc_id - CHARACTER(LEN=*), INTENT(IN) :: dest_name - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTEGER(SIZE_T) :: src_namelen - INTEGER(SIZE_T) :: dest_namelen - END FUNCTION h5lcopy_c - END INTERFACE - - src_namelen = LEN(src_name) - dest_namelen = LEN(dest_name) - - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lcopy_c(src_loc_id, src_name, src_namelen, dest_loc_id, dest_name, dest_namelen, & - lcpl_id_default, lapl_id_default) - - END SUBROUTINE h5lcopy_f - -! -!****s* H5L/h5ldelete_f -! -! NAME -! h5ldelete_f -! -! PURPOSE -! Removes a link from a group. -! -! INPUTS -! loc_id - Identifier of the file or group containing the object -! name - Name of the link to delete -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list identifier -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! SOURCE - SUBROUTINE h5ldelete_f(loc_id, name, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier of the file or group containing the object - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the link to delete - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5ldelete_c(loc_id, name, namelen, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LDELETE_C'::h5ldelete_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - END FUNCTION h5ldelete_c - END INTERFACE - - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5ldelete_c(loc_id, name, namelen, lapl_id_default) - - END SUBROUTINE h5ldelete_f - -! -!****s* H5L/H5Lcreate_soft_f -! -! NAME -! H5Lcreate_soft_f -! -! PURPOSE -! Creates a soft link to an object. -! -! INPUTS -! target_path - Path to the target object, which is not required to exist. -! link_loc_id - The file or group identifier for the new link. -! link_name - The name of the new link. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list identifier. -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! February 20, 2008 -! -! SOURCE - SUBROUTINE h5lcreate_soft_f(target_path, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: target_path ! Path to the target object, which is not required to exist. - INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. - CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. -!***** - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: target_path_len - INTEGER(SIZE_T) :: link_name_len - - INTERFACE - INTEGER FUNCTION h5lcreate_soft_c(target_path, target_path_len, & - link_loc_id, & - link_name,link_name_len, & - lcpl_id_default, lapl_id_default ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LCREATE_SOFT_C'::h5lcreate_soft_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: target_path, link_name - CHARACTER(LEN=*), INTENT(IN) :: target_path - INTEGER(SIZE_T) :: target_path_len - INTEGER(HID_T), INTENT(IN) :: link_loc_id - CHARACTER(LEN=*), INTENT(IN) :: link_name - INTEGER(SIZE_T) :: link_name_len - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - END FUNCTION h5lcreate_soft_c - END INTERFACE - - target_path_len = LEN(target_path) - link_name_len = LEN(link_name) - - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lcreate_soft_c(target_path, target_path_len,& - link_loc_id, & - link_name, link_name_len, & - lcpl_id_default, lapl_id_default ) - - END SUBROUTINE h5lcreate_soft_f - -! -!****s* H5L/H5Lcreate_hard_f -! -! NAME -! H5Lcreate_hard_f -! -! PURPOSE -! Creates a hard link to an object. -! -! INPUTS -! -! obj_loc_id - The file or group identifier for the target object. -! obj_name - Name of the target object, which must already exist. -! link_loc_id - The file or group identifier for the new link. -! link_name - The name of the new link. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list identifier. -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! February 27, 2008 -! -! SOURCE - SUBROUTINE h5lcreate_hard_f(obj_loc_id, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_loc_id ! The file or group identifier for the target object. - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of the target object, which must already exist. - INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. - CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. - - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. -!***** - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: link_namelen - - INTERFACE - INTEGER FUNCTION h5lcreate_hard_c(obj_loc_id, obj_name, obj_namelen, & - link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LCREATE_HARD_C'::h5lcreate_hard_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: obj_name, link_name - INTEGER(HID_T), INTENT(IN) :: obj_loc_id - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(HID_T), INTENT(IN) :: link_loc_id - CHARACTER(LEN=*), INTENT(IN) :: link_name - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: link_namelen - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - END FUNCTION h5lcreate_hard_c - END INTERFACE - obj_namelen = LEN(obj_name) - link_namelen = LEN(link_name) - - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lcreate_hard_c(obj_loc_id, obj_name, obj_namelen, & - link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) - - END SUBROUTINE h5lcreate_hard_f - -! -!****s* H5L/H5Lcreate_external_f -! -! NAME -! H5Lcreate_external_f -! -! PURPOSE -! Creates a soft link to an object in a different file. -! -! INPUTS -! -! file_name - Name of the file containing the target object. Neither the file nor the target object is -! required to exist. May be the file the link is being created in. -! obj_name - Path within the target file to the target object. -! link_loc_id - The file or group identifier for the new link. -! link_name - The name of the new link. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list identifier. -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! February 27, 2008 -! SOURCE - SUBROUTINE h5lcreate_external_f(file_name, obj_name, link_loc_id, link_name, hdferr, lcpl_id, lapl_id) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: file_name ! Name of the file containing the target object. Neither - ! the file nor the target object is required to exist. - ! May be the file the link is being created in. - CHARACTER(LEN=*), INTENT(IN) :: obj_name ! Name of the target object, which must already exist. - INTEGER(HID_T), INTENT(IN) :: link_loc_id ! The file or group identifier for the new link. - CHARACTER(LEN=*), INTENT(IN) :: link_name ! The name of the new link. - - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier. -!***** - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTEGER(SIZE_T) :: file_namelen - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: link_namelen - - INTERFACE - INTEGER FUNCTION h5lcreate_external_c(file_name, file_namelen, obj_name, obj_namelen, & - link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LCREATE_EXTERNAL_C'::h5lcreate_external_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: file_name, obj_name, link_name - CHARACTER(LEN=*), INTENT(IN) :: file_name - CHARACTER(LEN=*), INTENT(IN) :: obj_name - INTEGER(HID_T), INTENT(IN) :: link_loc_id - CHARACTER(LEN=*), INTENT(IN) :: link_name - INTEGER(SIZE_T) :: file_namelen - INTEGER(SIZE_T) :: obj_namelen - INTEGER(SIZE_T) :: link_namelen - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - END FUNCTION h5lcreate_external_c - END INTERFACE - file_namelen = LEN(file_name) - obj_namelen = LEN(obj_name) - link_namelen = LEN(link_name) - - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lcreate_external_c(file_name, file_namelen, obj_name, obj_namelen, & - link_loc_id, link_name, link_namelen, lcpl_id_default, lapl_id_default) - - END SUBROUTINE h5lcreate_external_f - -! -!****s* H5L/h5ldelete_by_idx_f -! -! NAME -! h5ldelete_by_idx_f -! -! PURPOSE -! Removes the nth link in a group. -! INPUTS -! loc_id - File or group identifier specifying location of subject group -! group_name - Name of subject group -! index_field - Type of index; Possible values are: -! H5_INDEX_UNKNOWN_F = -1 - Unknown index type -! H5_INDEX_NAME_F - Index on names -! H5_INDEX_CRT_ORDER_F - Index on creation order -! H5_INDEX_N_F - Number of indices defined -! -! order - Order within field or index; Possible values are: -! H5_ITER_UNKNOWN_F - Unknown order -! H5_ITER_INC_F - Increasing order -! H5_ITER_DEC_F - Decreasing order -! H5_ITER_NATIVE_F - No particular order, whatever is fastest -! H5_ITER_N_F - Number of iteration orders -! -! n - Link for which to retrieve information -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! February 29, 2008 -! SOURCE - SUBROUTINE h5ldelete_by_idx_f(loc_id, group_name, index_field, order, n, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifer for object to which attribute is attached - CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of object, relative to location, - ! from which attribute is to be removed - INTEGER, INTENT(IN) :: index_field ! Type of index; Possible values are: - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - ! H5_ITER_N_F - Number of iteration orders - INTEGER(HSIZE_T), INTENT(IN) :: n ! Offset within index - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: group_namelen - - INTERFACE - INTEGER FUNCTION h5ldelete_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LDELETE_BY_IDX_C'::h5ldelete_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: group_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER, INTENT(IN) :: index_field - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: group_namelen - END FUNCTION h5ldelete_by_idx_c - END INTERFACE - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - group_namelen = LEN(group_name) - hdferr = h5ldelete_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, lapl_id_default) - - END SUBROUTINE h5ldelete_by_idx_f - -! -!****s* H5L/H5Lexists_f -! -! NAME -! H5Lexists_f -! -! PURPOSE -! Check if a link with a particular name exists in a group. -! -! INPUTS -! loc_id - Identifier of the file or group to query. -! name - Link name to check -! -! OUTPUTS -! link_exists - link exists status (.TRUE.,.FALSE.) -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! February 29, 2008 -! -! SOURCE - SUBROUTINE h5lexists_f(loc_id, name, link_exists, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier of the file or group to query. - CHARACTER(LEN=*), INTENT(IN) :: name ! Link name to check. - LOGICAL, INTENT(OUT) :: link_exists ! .TRUE. if exists, .FALSE. otherwise - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id - ! Link access property list identifier. -!***** - INTEGER :: link_exists_c - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5lexists_c(loc_id, name, namelen, lapl_id_default, link_exists_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LEXISTS_C'::h5lexists_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T), INTENT(IN) :: namelen - INTEGER, INTENT(OUT) :: link_exists_c - INTEGER(HID_T) :: lapl_id_default - - END FUNCTION h5lexists_c - END INTERFACE - - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lexists_c(loc_id, name, namelen, lapl_id_default, link_exists_c) - - link_exists = .FALSE. - IF(link_exists_c.GT.0) link_exists = .TRUE. - - END SUBROUTINE h5lexists_f - -! -!****s* H5L/h5lget_info_f -! -! NAME -! h5lget_info_f -! -! PURPOSE -! Returns information about a link. -! -! INPUTS -! link_loc_id - File or group identifier. -! link_name - Name of the link for which information is being sought -! -! OUTPUTS -! NOTE: In C these are contained in the structure H5L_info_t -! -! cset - indicates the character set used for link’s name. -! corder - specifies the link’s creation order position. -! corder_valid - indicates whether the value in corder is valid. -! link_type - specifies the link class: -! H5L_TYPE_HARD_F - Hard link -! H5L_TYPE_SOFT_F - Soft link -! H5L_TYPE_EXTERNAL_F - External link -! H5L_TYPE_ERROR_ F - Error -! address - If the link is a hard link, address specifies the file address that the link points to -! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., -! the length of the name of the pointed-to object with a null terminator. -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! February 29, 2008 -! -! HISTORY -! Changed the link_type names to match those in C (bug 1720) from, -! H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F -! to -! H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F -! MSB January 8, 2010. -! -! SOURCE - SUBROUTINE h5lget_info_f(link_loc_id, link_name, & - cset, corder, f_corder_valid, link_type, address, val_size, & - hdferr, lapl_id) - IMPLICIT NONE - - INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. - CHARACTER(LEN=*), INTENT(IN) :: link_name ! Name of the link for which information is being sought - -! OUTPUTS NOTE: In C these are contained in the structure H5L_info_t - INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the link’s name. - INTEGER, INTENT(OUT) :: corder ! Specifies the link’s creation order position. - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the value in corder is valid. - INTEGER, INTENT(OUT) :: link_type ! Specifies the link class: - ! H5L_TYPE_HARD_F - Hard link - ! H5L_TYPE_SOFT_F - Soft link - ! H5L_TYPE_EXTERNAL_F - External link - ! H5L_TYPE_ERROR _F - Error - INTEGER(HADDR_T), INTENT(OUT) :: address ! If the link is a hard link, address specifies the file address that the link points to - INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., - ! the length of the name of the pointed-to object with a null terminator. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER(SIZE_T) :: link_namelen - INTEGER(HID_T) :: lapl_id_default - INTEGER :: corder_valid - - INTERFACE - INTEGER FUNCTION h5lget_info_c(link_loc_id, link_name, link_namelen, & - cset, corder, corder_valid, link_type, address, val_size, & - lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_INFO_C'::h5lget_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: link_name - INTEGER(HID_T), INTENT(IN) :: link_loc_id - CHARACTER(LEN=*), INTENT(IN) :: link_name - INTEGER, INTENT(OUT) :: cset - INTEGER, INTENT(OUT) :: corder - INTEGER, INTENT(OUT) :: link_type - INTEGER(HADDR_T), INTENT(OUT) :: address - INTEGER(SIZE_T), INTENT(OUT) :: val_size - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: link_namelen - INTEGER :: corder_valid - END FUNCTION h5lget_info_c - END INTERFACE - - link_namelen = LEN(link_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lget_info_c(link_loc_id, link_name, link_namelen, & - cset, corder, corder_valid, link_type, & - address, val_size, & - lapl_id_default) - - f_corder_valid =.FALSE. - IF(corder_valid .EQ. 1) f_corder_valid =.TRUE. - - END SUBROUTINE h5lget_info_f - -! -!****s* H5L/h5lget_info_by_idx_f -! -! NAME -! h5lget_info_by_idx_f -! -! PURPOSE -! Retrieves metadata for a link in a group, according to the order within a field or index. -! -! INPUTS -! loc_id - File or group identifier specifying location of subject group -! group_name - Name of subject group -! index_field - Index or field which determines the order -! order - Order within field or index -! n - Link for which to retrieve information -! -! OUTPUTS -! NOTE: In C these are defined as a structure: H5L_info_t -! corder_valid - Indicates whether the creation order data is valid for this attribute -! corder - Is a positive integer containing the creation order of the attribute -! cset - Indicates the character set used for the attribute’s name -! address - If the link is a hard link, address specifies the file address that the link points to -! val_size - If the link is a symbolic link, val_size will be the length of the link value, e.g., -! the length of the name of the pointed-to object with a null terminator. -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! February 29, 2008 -! -! HISTORY -! Changed the link_type names to match those in C (bug 1720) from, -! H5L_LINK_HARD_F, H5L_LINK_SOFT_F,H5L_LINK_EXTERNAL_F,H5L_LINK_ERROR_F -! to -! H5L_TYPE_HARD_F, H5L_TYPE_SOFT_F,H5L_TYPE_EXTERNAL_F,H5L_TYPE_ERROR_F -! MSB January 8, 2010. -! -! SOURCE - SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, & - link_type, f_corder_valid, corder, cset, address, val_size, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group - CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group - INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index - INTEGER, INTENT(OUT) :: link_type ! Specifies the link class: - ! H5L_TYPE_HARD_F - Hard link - ! H5L_TYPE_SOFT_F - Soft link - ! H5L_TYPE_EXTERNAL_F - External link - ! H5L_TYPE_ERROR _F - Error - LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute - INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute - INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name - INTEGER(HADDR_T), INTENT(OUT) :: address ! If the link is a hard link, address specifies the file address that the link points to - INTEGER(SIZE_T), INTENT(OUT) :: val_size ! If the link is a symbolic link, val_size will be the length of the link value, e.g., - ! the length of the name of the pointed-to object with a null terminator. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!***** - INTEGER :: corder_valid - INTEGER(SIZE_T) :: group_namelen - INTEGER(HID_T) :: lapl_id_default - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & - link_type, corder_valid, corder, cset, address, val_size, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_INFO_BY_IDX_C'::h5lget_info_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: group_name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER(SIZE_T) :: group_namelen - INTEGER, INTENT(IN) :: index_field - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER, INTENT(OUT) :: link_type - INTEGER :: corder_valid - INTEGER, INTENT(OUT) :: corder - INTEGER, INTENT(OUT) :: cset - INTEGER(HADDR_T), INTENT(OUT) :: address - INTEGER(SIZE_T), INTENT(OUT) :: val_size - INTEGER(HID_T) :: lapl_id_default - END FUNCTION h5lget_info_by_idx_c - END INTERFACE - - group_namelen = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & - link_type, corder_valid, corder, cset, address, val_size, lapl_id_default) - - f_corder_valid =.FALSE. - IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. - - END SUBROUTINE h5lget_info_by_idx_f - -! -!****s* H5L/h5lis_registered_f -! -! NAME -! h5lis_registered_f -! -! PURPOSE -! Determines whether a class of user-defined links is registered. -! -! INPUTS -! link_cls_id - User-defined link class identifier -! -! OUTPUTS -! registered - .TRUE. - if the link class has been registered -! .FALSE. - if it is unregistered -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 29, 2008 -! -! SOURCE - SUBROUTINE h5lis_registered_f(link_cls_id, registered, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: link_cls_id ! User-defined link class identifier - LOGICAL, INTENT(OUT) :: registered ! .TRUE. - if the link class has been registered and - ! .FALSE. - if it is unregistered - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5lis_registered_c(link_cls_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LIS_REGISTERED_C'::h5lis_registered_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: link_cls_id ! User-defined link class identifier - END FUNCTION h5lis_registered_c - END INTERFACE - - hdferr = h5lis_registered_c(link_cls_id) - - IF(hdferr.GT.0)THEN - registered = .TRUE. - ELSE IF(hdferr.EQ.0)THEN - registered = .FALSE. - ENDIF - - END SUBROUTINE h5lis_registered_f - -! -!****s* H5L/h5lmove_f -! -! NAME -! h5lmove_f -! -! PURPOSE -! Renames a link within an HDF5 file. -! -! INPUTS -! src_loc_id - Original file or group identifier. -! src_name - Original link name. -! dest_loc_id - Destination file or group identifier. -! dest_name - NEW link name. -! -! OUTPUTS -! hdferr - Error code: -! 0 on success and -1 on failure -! -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list identifier to be associated WITH the NEW link. -! lapl_id - Link access property list identifier to be associated WITH the NEW link. -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! SOURCE - SUBROUTINE h5lmove_f(src_loc_id, src_name, dest_loc_id, dest_name, hdferr, lcpl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: src_loc_id ! Original file or group identifier. - CHARACTER(LEN=*), INTENT(IN) :: src_name ! Original link name. - INTEGER(HID_T), INTENT(IN) :: dest_loc_id ! Destination file or group identifier. - CHARACTER(LEN=*), INTENT(IN) :: dest_name ! NEW link name. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list identifier - ! to be associated WITH the NEW link. - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list identifier - ! to be associated WITH the NEW link. -!***** - INTEGER(SIZE_T) :: src_namelen - INTEGER(SIZE_T) :: dest_namelen - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5lmove_c(src_loc_id, src_name, src_namelen, dest_loc_id, & - dest_name, dest_namelen, lcpl_id_default, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LMOVE_C'::h5lmove_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: src_name, dest_name - INTEGER(HID_T), INTENT(IN) :: src_loc_id - - CHARACTER(LEN=*), INTENT(IN) :: src_name - INTEGER(SIZE_T) :: src_namelen - INTEGER(HID_T), INTENT(IN) :: dest_loc_id - CHARACTER(LEN=*), INTENT(IN) :: dest_name - INTEGER(SIZE_T) :: dest_namelen - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: lapl_id_default - - END FUNCTION h5lmove_c - END INTERFACE - - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - src_namelen = LEN(src_name) - dest_namelen = LEN(dest_name) - - hdferr = H5Lmove_c(src_loc_id, src_name, src_namelen, dest_loc_id, & - dest_name, dest_namelen, lcpl_id_default, lapl_id_default) - - END SUBROUTINE h5lmove_f - -! -!****s* H5L/h5lget_name_by_idx_f -! -! NAME -! h5lget_name_by_idx_f -! -! PURPOSE -! Retrieves name of the nth link in a group, according to the order within a specified field or index. -! -! INPUTS -! loc_id - File or group identifier specifying location of subject group -! group_name - Name of subject group -! index_field - Index or field which determines the order -! order - Order within field or index -! n - Link for which to retrieve information -! -! OUTPUTS -! name - Buffer in which link value is returned -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! lapl_id - List access property list identifier. -! size - Maximum number of characters of link value to be returned. -! -! AUTHOR -! M. Scot Breitenfeld -! March 10, 2008 -! -! SOURCE - SUBROUTINE h5lget_name_by_idx_f(loc_id, group_name, index_field, order, n, & - name, hdferr, size, lapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group - CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group - INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order - ! H5_INDEX_UNKNOWN_F - Unknown index type - ! H5_INDEX_NAME_F - Index on names - ! H5_INDEX_CRT_ORDER_F - Index on creation order - ! H5_INDEX_N_F - Number of indices defined - INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: - ! H5_ITER_UNKNOWN_F - Unknown order - ! H5_ITER_INC_F - Increasing order - ! H5_ITER_DEC_F - Decreasing order - ! H5_ITER_NATIVE_F - No particular order, whatever is fastest - INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index - CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer in which link value is returned - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER(SIZE_T) :: group_namelen - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! Indicates the size, in the number of characters, of the link - INTEGER(SIZE_T) :: size_default - - INTERFACE - INTEGER FUNCTION h5lget_name_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & - size_default, name, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_NAME_BY_IDX_C'::h5lget_name_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: group_name, name - INTEGER(HID_T), INTENT(IN) :: loc_id - - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER(SIZE_T) :: group_namelen - INTEGER, INTENT(IN) :: index_field - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(SIZE_T) :: size_default - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER(HID_T) :: lapl_id_default - END FUNCTION h5lget_name_by_idx_c - END INTERFACE - - group_namelen = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - size_default = LEN(name) - - hdferr = h5lget_name_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & - size_default, name, lapl_id_default) - - IF(PRESENT(size)) size = size_default - - - END SUBROUTINE h5lget_name_by_idx_f - - -! HAS PROBLEM WITH void pointer in C -!!$! -!!$!****s* H5L/ -!!$! -!!$! NAME -!!$! h5lget_val_by_idx_f -!!$! -!!$! PURPOSE -!!$! Returns the link value of a link, according to the order of -!!$! an index. For symbolic links, this is the path to which the -!!$! link points, including the null terminator. For user-defined -!!$! links, it is the link buffer. -!!$! INPUTS -!!$! loc_id - File or group identifier specifying location of subject group -!!$! group_name - Name of subject group -!!$! index_field - Index or field which determines the order -!!$! order - Order within field or index -!!$! n - Link for which to retrieve information -!!$! size - Maximum number of characters of link value to be returned. -!!$! -!!$! OUTPUTS NOTE: In C these are defined as a structure: H5L_info_t -!!$! corder_valid - indicates whether the creation order data is valid for this attribute -!!$! corder - is a positive integer containing the creation order of the attribute -!!$! cset - indicates the character set used for the attribute’s name -!!$! data_size - indicates the size, in the number of characters, of the attribute -!!$! hdferr - error code -!!$! Success: 0 -!!$! Failure: -1 -!!$! OPTIONAL PARAMETERS -!!$! lapl_id - List access property list identifier. -!!$! -!!$! AUTHOR -!!$! M. Scot Breitenfeld -!!$! March 3, 2008 -!!$! -!!$! HISTORY N/A -!!$! -!!$! -!!$! SOURCE -!!$ SUBROUTINE h5lget_val_by_idx_f(loc_id, group_name, index_field, order, n, & -!!$ f_corder_valid, corder, cset, data_size, hdferr, lapl_id) -!!$ IMPLICIT NONE -!!$ INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier specifying location of subject group -!!$ CHARACTER(LEN=*), INTENT(IN) :: group_name ! Name of subject group -!!$ INTEGER, INTENT(IN) :: index_field ! Index or field which determines the order -!!$ ! H5_INDEX_UNKNOWN_F - Unknown index type -!!$ ! H5_INDEX_NAME_F - Index on names -!!$ ! H5_INDEX_CRT_ORDER_F - Index on creation order -!!$ ! H5_INDEX_N_F - Number of indices defined -!!$ INTEGER, INTENT(IN) :: order ! Order in which to iterate over index; Possible values are: -!!$ ! H5_ITER_UNKNOWN_F - Unknown order -!!$ ! H5_ITER_INC_F - Increasing order -!!$ ! H5_ITER_DEC_F - Decreasing order -!!$ ! H5_ITER_NATIVE_F - No particular order, whatever is fastest -!!$ INTEGER(HSIZE_T), INTENT(IN) :: n ! Attribute’s position in index -!!$ LOGICAL, INTENT(OUT) :: f_corder_valid ! Indicates whether the creation order data is valid for this attribute -!!$ INTEGER, INTENT(OUT) :: corder ! Is a positive integer containing the creation order of the attribute -!!$ INTEGER, INTENT(OUT) :: cset ! Indicates the character set used for the attribute’s name -!!$ INTEGER(HSIZE_T), INTENT(OUT) :: data_size ! Indicates the size, in the number of characters, of the attribute -!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: -!!$ ! 0 on success and -1 on failure -!!$ INTEGER :: corder_valid -!!$ INTEGER(SIZE_T) :: group_namelen -!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!!$ INTEGER(HID_T) :: lapl_id_default -!!$ -!!$ INTERFACE -!!$ INTEGER FUNCTION h5lget_val_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & -!!$ corder_valid, corder, cset, data_size, lapl_id_default) -!!$ USE H5GLOBAL -!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) -!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_VAL_BY_IDX_C'::h5lget_val_by_idx_c -!!$ !DEC$ENDIF -!!$ INTEGER(HID_T), INTENT(IN) :: loc_id -!!$ CHARACTER(LEN=*), INTENT(IN) :: group_name -!!$ INTEGER(SIZE_T) :: group_namelen -!!$ INTEGER, INTENT(IN) :: index_field -!!$ INTEGER, INTENT(IN) :: order -!!$ INTEGER(HSIZE_T), INTENT(IN) :: n -!!$ INTEGER :: corder_valid -!!$ INTEGER, INTENT(OUT) :: corder -!!$ INTEGER, INTENT(OUT) :: cset -!!$ INTEGER(HSIZE_T), INTENT(OUT) :: data_size -!!$ INTEGER(HID_T) :: lapl_id_default -!!$ END FUNCTION h5lget_val_by_idx_c -!!$ END INTERFACE -!!$ -!!$ group_namelen = LEN(group_name) -!!$ -!!$ lapl_id_default = H5P_DEFAULT_F -!!$ IF(PRESENT(lapl_id)) lapl_id_default = lapl_id -!!$ -!!$ hdferr = h5lget_info_by_idx_c(loc_id, group_name, group_namelen, index_field, order, n, & -!!$ corder_valid, corder, cset, data_size, lapl_id_default) -!!$ -!!$ f_corder_valid =.FALSE. -!!$ IF (corder_valid .EQ. 1) f_corder_valid =.TRUE. -!!$ -!!$ END SUBROUTINE h5lget_val_by_idx_f - -!!$! -!!$!****s* H5L/h5lget_val_f -!!$! -!!$! NAME -!!$! h5lget_val_f -!!$! -!!$! PURPOSE -!!$! Returns the value of a symbolic link. -!!$! -!!$! INPUTS -!!$! link_loc_id - File or group identifier. -!!$! link_name - Link whose value is to be returned. -!!$! size - Maximum number of characters of link value to be returned. -!!$! -!!$! OUTPUTS -!!$! linkval_buff - The buffer to hold the returned link value. -!!$! hdferr - error code -!!$! Success: 0 -!!$! Failure: -1 -!!$! OPTIONAL PARAMETERS -!!$! lapl_id - List access property list identifier. -!!$! -!!$! AUTHOR -!!$! M. Scot Breitenfeld -!!$! March 3, 2008 -!!$! SOURCE -!!$ SUBROUTINE h5lget_val_f(link_loc_id, link_name, size, linkval_buff, & -!!$ hdferr, lapl_id) -!!$ IMPLICIT NONE -!!$ INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. -!!$ CHARACTER(LEN=*), INTENT(IN) :: link_name ! Link whose value is to be returned. -!!$ INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of characters of link value to be returned. -!!$ -!!$ CHARACTER(LEN=size), INTENT(OUT) :: linkval_buff ! The buffer to hold the returned link value. -!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: -!!$ ! 0 on success and -1 on failure -!!$ INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lapl_id ! Link access property list -!!$ -!!$ INTEGER :: link_namelen -!!$ INTEGER(HID_T) :: lapl_id_default -!!$ INTEGER :: corder_valid -!!$ -!!$ INTEGER :: link_namelen -!!$ INTEGER(HID_T) :: lapl_id_default -!!$ -!!$! MS FORTRAN needs explicit interface for C functions called here. -!!$! -!!$ INTERFACE -!!$ INTEGER FUNCTION h5lget_val_c(link_loc_id, link_name, link_namelen, size, linkval_buff, & -!!$ lapl_id_default) -!!$ USE H5GLOBAL -!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) -!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LGET_VAL_C'::h5lget_val_c -!!$ !DEC$ENDIF -!!$ INTEGER(HID_T), INTENT(IN) :: link_loc_id ! File or group identifier. -!!$ CHARACTER(LEN=*), INTENT(IN) :: link_name ! Link whose value is to be returned. -!!$ INTEGER :: link_namelen -!!$ INTEGER(SIZE_T), INTENT(IN) :: size ! Maximum number of characters of link value to be returned. -!!$ -!!$ CHARACTER(LEN=size), INTENT(OUT) :: linkval_buff ! The buffer to hold the returned link value. -!!$ -!!$ INTEGER :: link_namelen -!!$ INTEGER(HID_T) :: lapl_id_default -!!$ -!!$ END FUNCTION h5lget_val_c -!!$ END INTERFACE -!!$ -!!$ link_namelen = LEN(link_name) -!!$ -!!$ lapl_id_default = H5P_DEFAULT_F -!!$ IF(PRESENT(lapl_id)) lapl_id_default = lapl_id -!!$ -!!$ hdferr = h5lget_val_c(link_loc_id, link_name, link_namelen, size, linkval_buff, & -!!$ lapl_id_default) -!!$ -!!$ END SUBROUTINE h5lget_val_f - -!!$! -!!$!****s* H5L/H5Lregistered_f -!!$! -!!$! NAME -!!$! H5Lregistered_f -!!$! -!!$! PURPOSE -!!$! Registers user-defined link class or changes behavior of existing class. -!!$! -!!$! INPUTS NOTE: In C the following represents struct H5L_class_t: -!!$! version - Version number of this struct -!!$! class_id - Link class identifier -!!$! comment - Comment for debugging -!!$! create_func - Callback during link creation -!!$! move_func - Callback after moving link -!!$! copy_func - Callback after copying link -!!$! trav_func - The main traversal function -!!$! del_func - Callback for link deletion -!!$! query_func - Callback for queries -!!$! -!!$! OUTPUTS -!!$! hdferr - Error code -!!$! Success: 0 -!!$! Failure: -1 -!!$! OPTIONAL PARAMETERS -!!$! None -!!$! -!!$! AUTHOR -!!$! M. Scot Breitenfeld -!!$! February 29, 2008 -!!$! -!!$! HISTORY N/A -!!$! -!!$! -!!$! SOURCE -!!$ SUBROUTINE H5Lregistered_f(version, class_id, comment, create_func, & -!!$ move_func, copy_func, trav_func, del_func, query_func, hdferr) -!!$ IMPLICIT NONE -!!$ INTEGER, INTENT(IN) :: version ! Version number of this struct -!!$ INTEGER, INTENT(IN) :: class_id ! Link class identifier -!!$ CHARACTER(LEN=*), INTENT(IN) :: comment ! Comment for debugging -!!$ CHARACTER(LEN=*), INTENT(IN) :: create_func ! Callback during link creation -!!$ CHARACTER(LEN=*), INTENT(IN) :: move_func ! Callback after moving link -!!$ CHARACTER(LEN=*), INTENT(IN) :: copy_func ! Callback after copying link -!!$ CHARACTER(LEN=*), INTENT(IN) :: trav_func ! The main traversal function -!!$ CHARACTER(LEN=*), INTENT(IN) :: del_func ! Callback for link deletion -!!$ CHARACTER(LEN=*), INTENT(IN) :: query_func ! Callback for queries -!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: -!!$ ! 0 on success and -1 on failure -!!$ INTEGER :: comment_len -!!$ INTEGER :: create_func_len -!!$ INTEGER :: move_func_len -!!$ INTEGER :: copy_func_len -!!$ INTEGER :: trav_func_len -!!$ INTEGER :: del_func_len -!!$ INTEGER :: query_func_len -!!$ -!!$ INTERFACE -!!$ INTEGER FUNCTION H5Lregistered_c(version, class_id, comment, & -!!$ create_func, create_func_len, & -!!$ move_func, move_func_len, & -!!$ copy_func, copy_func_len, & -!!$ trav_func, trav_func_len, & -!!$ del_func, del_func_len, & -!!$ query_func,query_func_len) -!!$ USE H5GLOBAL -!!$ !DEC$IF DEFINED(HDF5F90_WINDOWS) -!!$ !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LREGISTERED_C'::H5Lregistered_c -!!$ !DEC$ENDIF -!!$ INTEGER, INTENT(IN) :: version ! Version number of this struct -!!$ INTEGER, INTENT(IN) :: class_id ! Link class identifier -!!$ CHARACTER(LEN=*), INTENT(IN) :: comment ! Comment for debugging -!!$ CHARACTER(LEN=*), INTENT(IN) :: create_func ! Callback during link creation -!!$ CHARACTER(LEN=*), INTENT(IN) :: move_func ! Callback after moving link -!!$ CHARACTER(LEN=*), INTENT(IN) :: copy_func ! Callback after copying link -!!$ CHARACTER(LEN=*), INTENT(IN) :: trav_func ! The main traversal function -!!$ CHARACTER(LEN=*), INTENT(IN) :: del_func ! Callback for link deletion -!!$ CHARACTER(LEN=*), INTENT(IN) :: query_func ! Callback for queries -!!$ INTEGER, INTENT(OUT) :: hdferr ! Error code: -!!$ ! 0 on success and -1 on failure -!!$ INTEGER :: comment_len -!!$ INTEGER :: create_func_len -!!$ INTEGER :: move_func_len -!!$ INTEGER :: copy_func_len -!!$ INTEGER :: trav_func_len -!!$ INTEGER :: del_func_len -!!$ INTEGER :: query_func_len -!!$ -!!$ END FUNCTION H5Lregistered_c -!!$ END INTERFACE -!!$ -!!$ comment_len = LEN(comment) -!!$ create_func_len = LEN(create_func) -!!$ move_func_len = LEN(move_func) -!!$ copy_func_len = LEN(copy_func) -!!$ trav_func_len = LEN(trav_func) -!!$ del_func_len = LEN(del_func) -!!$ query_func_len = LEN(query_func) -!!$ -!!$ hdferr = H5Lregistered_c(version, class_id, comment, & -!!$ create_func, create_func_len, & -!!$ move_func, move_func_len, & -!!$ copy_func, copy_func_len, & -!!$ trav_func, trav_func_len, & -!!$ del_func, del_func_len, & -!!$ query_func, query_func_len) -!!$ -!!$ END SUBROUTINE H5Lregistered_f - -END MODULE H5L diff --git a/fortran/src/H5Lff_F03.f90 b/fortran/src/H5Lff_F03.f90 deleted file mode 100644 index fa95717..0000000 --- a/fortran/src/H5Lff_F03.f90 +++ /dev/null @@ -1,242 +0,0 @@ -!****h* ROBODoc/H5L (F03) -! -! NAME -! H5L_PROVISIONAL -! -! FILE -! src/fortran/src/H5Lff_F03.f90 -! -! PURPOSE -! -! This file contains Fortran 90 and Fortran 2003 interfaces for H5L functions. -! It contains the same functions as H5Lff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Lff_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5A function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5L_PROVISIONAL - - USE H5GLOBAL - USE ISO_C_BINDING - - IMPLICIT NONE - -!****t* H5L (F03)/h5l_info_t -! -! Fortran2003 Derived Type: -! - TYPE, bind(c) :: union_t - INTEGER(haddr_t) :: address - INTEGER(size_t) :: val_size - END TYPE union_t - - TYPE, bind(c) :: h5l_info_t - INTEGER(c_int) :: type ! H5L_type_t type -! LOGICAL(c_bool) :: corder_valid ! hbool_t corder_valid - INTEGER(c_int64_t) :: corder ! int64_t corder; - INTEGER(c_int) :: cset ! H5T_cset_t cset; - TYPE(union_t) :: u - END TYPE h5l_info_t - -!***** - -!type specifies the link class. Valid values include the following: -! H5L_TYPE_HARD Hard link -! H5L_TYPE_SOFT Soft link -! H5L_TYPE_EXTERNAL External link -! H5L_TYPE_ERROR Error -!cset specifies the character set in which the link name is encoded. Valid values include the following: -! H5T_CSET_ASCII US ASCII -! H5T_CSET_UTF8 UTF-8 Unicode encoding - -CONTAINS - -!****s* H5L (F03)/h5literate_f -! -! NAME -! h5literate_f -! -! PURPOSE -! Iterates through links in a group. -! -! Inputs: -! group_id - Identifier specifying subject group -! index_type - Type of index which determines the order: -! H5_INDEX_NAME_F - Alpha-numeric index on name -! H5_INDEX_CRT_ORDER_F - Index on creation order -! order - Order within index: -! H5_ITER_INC_F - Increasing order -! H5_ITER_DEC_F - Decreasing order -! H5_ITER_NATIVE_F - Fastest available order -! idx - IN: Iteration position at which to start -! op - Callback function passing data regarding the link to the calling application -! op_data - User-defined pointer to data required by the application for its processing of the link -! -! Outputs: -! idx - OUT: Position at which an interrupted iteration may be restarted -! return_value - Success: The return value of the first operator that -! returns non-zero, or zero if all members were -! processed with no operator returning non-zero. -! -! Failure: Negative if something goes wrong within the -! library, or the negative value returned by one -! of the operators. -! -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! July 8, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5literate_f(group_id, index_type, order, idx, op, op_data, return_value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: group_id - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(INOUT) :: idx - TYPE(C_FUNPTR) , INTENT(IN) :: op - TYPE(C_PTR) , INTENT(IN) :: op_data - INTEGER , INTENT(OUT) :: return_value - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5literate_c(group_id, index_type, order, idx, op, op_data) & - BIND(C, NAME='h5literate_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, c_funptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: group_id - INTEGER, INTENT(IN) :: index_type - INTEGER, INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(INOUT) :: idx - TYPE(C_FUNPTR), VALUE :: op - TYPE(C_PTR), VALUE :: op_data - END FUNCTION h5literate_c - END INTERFACE - - return_value = h5literate_c(group_id, index_type, order, idx, op, op_data) - - IF(return_value.GE.0)THEN - hdferr = 0 - ELSE - hdferr = -1 - END IF - - END SUBROUTINE h5literate_f - -!****s* H5L (F03)/h5literate_by_name_f -! -! NAME -! h5literate_by_name_f -! -! PURPOSE -! Iterates through links in a group. -! -! Inputs: -! loc_id - File or group identifier specifying location of subject group -! group_name - Name of subject group -! index_type - Type of index which determines the order: -! H5_INDEX_NAME_F - Alpha-numeric index on name -! H5_INDEX_CRT_ORDER_F - Index on creation order -! order - Order within index: -! H5_ITER_INC_F - Increasing order -! H5_ITER_DEC_F - Decreasing order -! H5_ITER_NATIVE_F - Fastest available order -! idx - IN: Iteration position at which to start -! op - Callback function passing data regarding the link to the calling application -! op_data - User-defined pointer to data required by the application for its processing of the link -! -! Outputs: -! idx - OUT: Position at which an interrupted iteration may be restarted -! return_value - Success: The return value of the first operator that -! returns non-zero, or zero if all members were -! processed with no operator returning non-zero. -! -! Failure: Negative if something goes wrong within the -! library, or the negative value returned by one -! of the operators. -! -! hdferr - Returns 0 if successful and -1 if fails -! -! Optional parameters: -! lapl_id - Link access property list -! -! AUTHOR -! M. Scot Breitenfeld -! Augest 18, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5literate_by_name_f(loc_id, group_name, index_type, order, & - idx, op, op_data, return_value, hdferr, lapl_id) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(INOUT) :: idx - TYPE(C_FUNPTR) , INTENT(IN) :: op - TYPE(C_PTR) , INTENT(IN) :: op_data - INTEGER , INTENT(OUT) :: return_value - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5literate_by_name_c(loc_id, name, namelen, index_type, order,& - idx, op, op_data, lapl_id_default) BIND(C, NAME='h5literate_by_name_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr, c_funptr - USE H5GLOBAL - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER(SIZE_T) , INTENT(IN) :: namelen - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(INOUT) :: idx - TYPE(C_FUNPTR), VALUE :: op - TYPE(C_PTR), VALUE :: op_data - INTEGER(HID_T) , INTENT(IN) :: lapl_id_default - END FUNCTION - END INTERFACE - - namelen = LEN(group_name) - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - return_value = h5literate_by_name_c(loc_id, group_name, namelen, index_type, order, idx, op, op_data, lapl_id_default) - - IF(return_value.GE.0)THEN - hdferr = 0 - ELSE - hdferr = -1 - END IF - - END SUBROUTINE h5literate_by_name_f - -END MODULE H5L_PROVISIONAL diff --git a/fortran/src/H5Lff_F90.f90 b/fortran/src/H5Lff_F90.f90 deleted file mode 100644 index dd62b7b..0000000 --- a/fortran/src/H5Lff_F90.f90 +++ /dev/null @@ -1,39 +0,0 @@ -!****h* ROBODoc/H5L (F90) -! -! NAME -! MODULE H5L_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5L functions. It contains -! the same functions as H5Lff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Lff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! NOTE -! Currently contains no functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5L_PROVISIONAL - -END MODULE H5L_PROVISIONAL diff --git a/fortran/src/H5Of.c b/fortran/src/H5Of.c index ae344a5..4801f7d 100644 --- a/fortran/src/H5Of.c +++ b/fortran/src/H5Of.c @@ -1,6 +1,6 @@ /****h* H5Of/H5Of * PURPOSE - * This file contains C stubs for H5O Fortran APIs + * This file contains C stubs for H5O Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -109,12 +109,12 @@ fill_h5o_info_t_f(H5O_info_t Oinfo, H5O_info_t_f *object_info) { * PURPOSE * Calls H5Olink * INPUTS - * object_id - Object to be linked. - * new_loc_id - File or group identifier specifying location at which object is to be linked. - * name - Name of link to be created, relative to new_loc_id. - * namelen - Length of buffer for link to be created. - * lcpl_id - Link creation property list identifier. - * lapl_id - Link access property list identifier. + * object_id - Object to be linked. + * new_loc_id - File or group identifier specifying location at which object is to be linked. + * name - Name of link to be created, relative to new_loc_id. + * namelen - Length of buffer for link to be created. + * lcpl_id - Link creation property list identifier. + * lapl_id - Link access property list identifier. * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -123,7 +123,7 @@ fill_h5o_info_t_f(H5O_info_t Oinfo, H5O_info_t_f *object_info) { * SOURCE */ int_f -nh5olink_c (hid_t_f *object_id, hid_t_f *new_loc_id, _fcd name, size_t_f *namelen, +h5olink_c (hid_t_f *object_id, hid_t_f *new_loc_id, _fcd name, size_t_f *namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id) /******/ { @@ -169,7 +169,7 @@ nh5olink_c (hid_t_f *object_id, hid_t_f *new_loc_id, _fcd name, size_t_f *namele * SOURCE */ int_f -nh5oopen_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid_t_f *obj_id) +h5oopen_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid_t_f *obj_id) /******/ { char *c_name = NULL; /* Buffer to hold C string */ @@ -194,20 +194,20 @@ nh5oopen_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid } /****if* H5Of/h5oclose_c * NAME - * h5oclose_c + * h5oclose_c * PURPOSE - * Call H5Oclose + * Call H5Oclose * INPUTS - * object_id - Object identifier + * object_id - Object identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * December 17, 2008 + * December 17, 2008 * SOURCE */ int_f -nh5oclose_c ( hid_t_f *object_id ) +h5oclose_c ( hid_t_f *object_id ) /******/ { int_f ret_value=0; /* Return value */ @@ -225,15 +225,15 @@ nh5oclose_c ( hid_t_f *object_id ) * PURPOSE * Calls H5Ovisit * INPUTS - * object_id - Identifier specifying subject group - * index_type - Type of index which determines the order - * order - Order within index - * idx - Iteration position at which to start - * op - Callback function passing data regarding the link to the calling application - * op_data - User-defined pointer to data required by the application for its processing of the link + * object_id - Identifier specifying subject group + * index_type - Type of index which determines the order + * order - Order within index + * idx - Iteration position at which to start + * op - Callback function passing data regarding the link to the calling application + * op_data - User-defined pointer to data required by the application for its processing of the link * * OUTPUTS - * idx - Position at which an interrupted iteration may be restarted + * idx - Position at which an interrupted iteration may be restarted * * RETURNS * >0 on success, 0< on failure @@ -266,20 +266,20 @@ h5ovisit_c(hid_t_f *group_id, int_f *index_type, int_f *order, H5O_iterate_t op, * Calls H5open_by_addr * INPUTS * loc_id - File or group identifier - * addr - Object’s address in the file + * addr - Object’s address in the file * * OUTPUTS * obj_id - Dataset identifier * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * September 14, 2009 * SOURCE */ int_f -nh5oopen_by_addr_c (hid_t_f *loc_id, haddr_t_f *addr, hid_t_f *obj_id) +h5oopen_by_addr_c (hid_t_f *loc_id, haddr_t_f *addr, hid_t_f *obj_id) /******/ { int_f ret_value = 0; /* Return value */ @@ -458,7 +458,7 @@ h5oget_info_c (hid_t_f *object_id, H5O_info_t_f *object_info) * SOURCE */ int_f -nh5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len, +h5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len, hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len, hid_t_f *ocpypl_id, hid_t_f *lcpl_id ) /******/ @@ -499,15 +499,15 @@ nh5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len, * PURPOSE * Calls H5Ovisit_by_name * INPUTS - * object_id - Identifier specifying subject group - * index_type - Type of index which determines the order - * order - Order within index - * idx - Iteration position at which to start - * op - Callback function passing data regarding the link to the calling application - * op_data - User-defined pointer to data required by the application for its processing of the link + * object_id - Identifier specifying subject group + * index_type - Type of index which determines the order + * order - Order within index + * idx - Iteration position at which to start + * op - Callback function passing data regarding the link to the calling application + * op_data - User-defined pointer to data required by the application for its processing of the link * * OUTPUTS - * idx - Position at which an interrupted iteration may be restarted + * idx - Position at which an interrupted iteration may be restarted * * RETURNS * >0 on success, 0< on failure @@ -560,7 +560,7 @@ h5ovisit_by_name_c(hid_t_f *loc_id, _fcd object_name, size_t_f *namelen, int_f * SOURCE */ int_f -nh5odecr_refcount_c (hid_t_f *object_id) +h5odecr_refcount_c (hid_t_f *object_id) /******/ { int_f ret_value = 0; /* Return value */ @@ -594,7 +594,7 @@ nh5odecr_refcount_c (hid_t_f *object_id) * SOURCE */ int_f -nh5oexists_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id) +h5oexists_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id) /******/ { char *c_name = NULL; /* Buffer to hold C string */ @@ -633,7 +633,7 @@ nh5oexists_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *la * SOURCE */ int_f -nh5oincr_refcount_c (hid_t_f *object_id) +h5oincr_refcount_c (hid_t_f *object_id) /******/ { int_f ret_value = 0; /* Return value */ @@ -665,7 +665,7 @@ nh5oincr_refcount_c (hid_t_f *object_id) * SOURCE */ int_f -nh5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen) +h5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen) /******/ { char *c_comment = NULL; /* Buffer to hold C string */ @@ -697,7 +697,7 @@ nh5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen) * INPUTS * object_id - Identifier of the target object. * name - Name of the object whose comment is to be set or reset, - * specified as a path relative to loc_id. + * specified as a path relative to loc_id. * namelen - Length of the name. * comment - The new comment. * commentlen - Length of the comment. @@ -710,7 +710,7 @@ nh5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen) * SOURCE */ int_f -nh5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen, _fcd comment, size_t_f *commentlen, hid_t_f *lapl_id) +h5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen, _fcd comment, size_t_f *commentlen, hid_t_f *lapl_id) /******/ { char *c_comment = NULL; /* Buffer to hold C string */ @@ -755,7 +755,7 @@ nh5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen, _f * n - Object to open. * lapl_id - Link access property list. * OUTPUTS - * obj_id - An object identifier for the opened object. + * obj_id - An object identifier for the opened object. * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -764,7 +764,7 @@ nh5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen, _f * SOURCE */ int_f -nh5oopen_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +h5oopen_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *obj_id, hid_t_f *lapl_id) /******/ { @@ -813,7 +813,7 @@ nh5oopen_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, * SOURCE */ int_f -nh5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hssize_t_f *bufsize) +h5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hssize_t_f *bufsize) /******/ { char *c_comment = NULL; /* Buffer to hold C string */ @@ -869,7 +869,7 @@ nh5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hss * SOURCE */ int_f -nh5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size, +h5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size, _fcd comment, size_t_f *commentsize, size_t_f *bufsize, hid_t_f *lapl_id) /******/ { diff --git a/fortran/src/H5Off.F90 b/fortran/src/H5Off.F90 new file mode 100644 index 0000000..da940df --- /dev/null +++ b/fortran/src/H5Off.F90 @@ -0,0 +1,1149 @@ +!****h* ROBODoc/H5O +! +! NAME +! MODULE H5O +! +! FILE +! fortran/src/H5Off.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5O functions. +! +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5O function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5O + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_FUNPTR, C_CHAR, C_INT64_T, C_LONG, C_INT, C_LOC + USE H5GLOBAL + IMPLICIT NONE + +!****t* H5T (F03)/h5o_info_t +! +! Fortran2003 Derived Type: +! + TYPE, BIND(C) :: space_t + INTEGER(hsize_t) :: total ! Total space for storing object header in file + INTEGER(hsize_t) :: meta ! Space within header for object header metadata information + INTEGER(hsize_t) :: mesg ! Space within header for actual message information + INTEGER(hsize_t) :: free ! Free space within object header + END TYPE space_t + + TYPE, BIND(C) :: mesg_t + INTEGER(c_int64_t) :: present ! Flags to indicate presence of message type in header + INTEGER(c_int64_t) :: shared ! Flags to indicate message type is shared in header + END TYPE mesg_t + + TYPE, BIND(C) :: hdr_t + INTEGER :: version ! Version number of header format in file + INTEGER :: nmesgs ! Number of object header messages + INTEGER :: nchunks ! Number of object header chunks + INTEGER :: flags ! Object header status flags + TYPE(space_t) :: space + TYPE(mesg_t) :: mesg + END TYPE hdr_t + + ! Extra metadata storage for obj & attributes + TYPE, BIND(C) :: H5_ih_info_t + INTEGER(hsize_t) :: index_size ! btree and/or list + INTEGER(hsize_t) :: heap_size + END TYPE H5_ih_info_t + + TYPE, BIND(C) :: meta_size_t + TYPE(H5_ih_info_t) :: obj ! v1/v2 B-tree & local/fractal heap for groups, B-tree for chunked datasets + TYPE(H5_ih_info_t) :: attr ! v2 B-tree & heap for attributes + ENDTYPE meta_size_t + + TYPE, BIND(C) :: h5o_info_t + INTEGER(C_LONG) :: fileno ! File number that object is located in + INTEGER(haddr_t) :: addr ! Object address in file + INTEGER(C_INT) :: type ! Basic object type (group, dataset, etc.) + INTEGER :: rc ! Reference count of object + + INTEGER, DIMENSION(8) :: atime ! Access time ! -- NOTE -- + INTEGER, DIMENSION(8) :: mtime ! Modification time ! Returns an integer array + INTEGER, DIMENSION(8) :: ctime ! Change time ! as specified in the Fortran + INTEGER, DIMENSION(8) :: btime ! Birth time ! intrinsic DATE_AND_TIME(VALUES) + + INTEGER(hsize_t) :: num_attrs ! # of attributes attached to object + + TYPE(hdr_t) :: hdr + + TYPE(meta_size_t) :: meta_size + END TYPE h5o_info_t + +!***** + +CONTAINS + +!****s* H5O/h5olink_f +! +! NAME +! h5olink_f +! +! PURPOSE +! Creates a hard link to an object in an HDF5 file. +! +! Inputs: +! object_id - Object to be linked. +! new_loc_id - File or group identifier specifying location at which object is to be linked. +! new_link_name - Name of link to be created, relative to new_loc_id. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lcpl_id - Link creation property list identifier. +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! April 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5olink_f(object_id, new_loc_id, new_link_name, hdferr, lcpl_id, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: object_id + INTEGER(HID_T) , INTENT(IN) :: new_loc_id + CHARACTER(LEN=*), INTENT(IN) :: new_link_name + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lcpl_id + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(HID_T) :: lcpl_id_default + + INTEGER(SIZE_T) :: new_link_namelen + + INTERFACE + INTEGER FUNCTION h5olink_c(object_id, new_loc_id, new_link_name, new_link_namelen, & + lcpl_id_default, lapl_id_default) BIND(C,NAME='h5olink_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER(HID_T), INTENT(IN) :: new_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: new_link_name + INTEGER(SIZE_T) :: new_link_namelen + INTEGER(HID_T) :: lapl_id_default + INTEGER(HID_T) :: lcpl_id_default + END FUNCTION h5olink_c + END INTERFACE + + new_link_namelen = LEN(new_link_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + + hdferr = h5olink_c(object_id, new_loc_id, new_link_name, new_link_namelen, & + lcpl_id_default, lapl_id_default) + + END SUBROUTINE h5olink_f + +!****s* H5O/h5oopen_f +! +! NAME +! h5oopen_f +! +! PURPOSE +! Opens an object in an HDF5 file by location identifier and path name. +! +! Inputs: +! loc_id - File or group identifier. +! name - Path to the object, relative to loc_id. +! +! Outputs: +! obj_id - Object identifier for the opened object. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lapl_id - Access property list identifier for the link pointing to the object. +! +! AUTHOR +! M. Scot Breitenfeld +! April 18, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5oopen_f(loc_id, name, obj_id, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER(HID_T) , INTENT(OUT) :: obj_id + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id +!***** + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + + INTERFACE + INTEGER FUNCTION h5oopen_c(loc_id, name, namelen, lapl_id_default, obj_id) BIND(C,NAME='h5oopen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(HID_T) :: lapl_id_default + INTEGER(SIZE_T) :: namelen + INTEGER(HID_T), INTENT(OUT) :: obj_id + END FUNCTION h5oopen_c + END INTERFACE + + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5oopen_c(loc_id, name, namelen, lapl_id_default, obj_id) + + END SUBROUTINE h5oopen_f +! +!****s* H5O/h5oclose_f +! +! NAME +! h5oclose_f +! +! PURPOSE +! Closes an object in an HDF5 file. +! +! Inputs: +! object_id - Object identifier. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! December 17, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5oclose_f(object_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5oclose_c(object_id) BIND(C,NAME='h5oclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + END FUNCTION h5oclose_c + END INTERFACE + + hdferr = h5oclose_c(object_id) + END SUBROUTINE h5oclose_f + +! +!****s* H5O/h5open_by_addr_f +! NAME +! h5oopen_by_addr_f +! +! PURPOSE +! Opens an object using its address within an HDF5 file. +! +! Inputs: +! loc_id - File or group identifier. +! addr - Object’s address in the file. +! +! Outputs: +! obj_id - Object identifier for the opened object. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! September 14, 2009 +! +! Fortran90 Interface: + SUBROUTINE h5oopen_by_addr_f(loc_id, addr, obj_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + INTEGER(HADDR_T), INTENT(IN) :: addr + INTEGER(HID_T) , INTENT(OUT) :: obj_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5oopen_by_addr_c(loc_id, addr, obj_id) BIND(C,NAME='h5oopen_by_addr_c') + IMPORT :: HID_T, HADDR_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER(HADDR_T), INTENT(IN) :: addr + INTEGER(HID_T), INTENT(OUT) :: obj_id + END FUNCTION h5oopen_by_addr_c + END INTERFACE + + hdferr = h5oopen_by_addr_c(loc_id, addr, obj_id) + + END SUBROUTINE h5oopen_by_addr_f +! +!****s* H5O/h5ocopy_f +! NAME +! h5ocopy_f +! +! PURPOSE +! Copies an object in an HDF5 file. +! +! Inputs: +! src_loc_id - Object identifier indicating the location of the source object to be copied. +! src_name - Name of the source object to be copied. +! dst_loc_id - Location identifier specifying the destination. +! dst_name - Name to be assigned to the new copy. +! +! Optional parameters: +! ocpypl_id - Object copy property list. +! lcpl_id - Link creation property list for the new hard link. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! March 14, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5ocopy_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr, ocpypl_id, lcpl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: src_loc_id + CHARACTER(LEN=*), INTENT(IN) :: src_name + INTEGER(HID_T) , INTENT(IN) :: dst_loc_id + CHARACTER(LEN=*), INTENT(IN) :: dst_name + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: ocpypl_id + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lcpl_id +!***** + + INTEGER(SIZE_T) :: src_name_len, dst_name_len + INTEGER(HID_T) :: ocpypl_id_default, lcpl_id_default + + INTERFACE + INTEGER FUNCTION h5ocopy_c(src_loc_id, src_name, src_name_len, & + dst_loc_id, dst_name, dst_name_len, ocpypl_id_default, lcpl_id_default) & + BIND(C,NAME='h5ocopy_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: src_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: src_name + INTEGER(HID_T) , INTENT(IN) :: dst_loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: dst_name + INTEGER(HID_T) , INTENT(IN) :: ocpypl_id_default + INTEGER(HID_T) , INTENT(IN) :: lcpl_id_default + INTEGER(SIZE_T) :: src_name_len, dst_name_len + + END FUNCTION h5ocopy_c + END INTERFACE + + src_name_len = LEN(src_name) + dst_name_len = LEN(dst_name) + + ocpypl_id_default = H5P_DEFAULT_F + IF(PRESENT(ocpypl_id)) ocpypl_id_default = ocpypl_id + lcpl_id_default = H5P_DEFAULT_F + IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + + hdferr = h5ocopy_c(src_loc_id, src_name, src_name_len, & + dst_loc_id, dst_name, dst_name_len, ocpypl_id_default, lcpl_id_default) + + END SUBROUTINE h5ocopy_f + +!****s* H5O/h5odecr_refcount_f +! NAME +! h5odecr_refcount_f +! +! PURPOSE +! Decrements an object reference count. +! +! Inputs: +! object_id - Object identifier. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 11, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5odecr_refcount_f(object_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER , INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5odecr_refcount_c(object_id) BIND(C,NAME='h5odecr_refcount_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: object_id + END FUNCTION h5odecr_refcount_c + END INTERFACE + + hdferr = h5odecr_refcount_c(object_id) + + END SUBROUTINE h5odecr_refcount_f + +!****s* H5O/h5oexists_by_name_f +! NAME +! h5oexists_by_name_f +! +! PURPOSE +! Determines whether a link resolves to an actual object. +! +! Inputs: +! loc_id - Identifier of the file or group to query. +! name - The name of the link to check. +! +! +! Optional parameters: +! lapl_id - Link access property list identifier. +! +! Outputs: +! link_exists - Existing link resolves to an object. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 11, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oexists_by_name_f(loc_id, name, link_exists, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + LOGICAL , INTENT(OUT) :: link_exists + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id +!***** + + INTEGER(size_t) :: namelen + INTEGER :: status + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5oexists_by_name_c(loc_id, name, namelen, lapl_id) & + BIND(C,NAME='h5oexists_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) , INTENT(IN) :: namelen + INTEGER(HID_T) , INTENT(IN) :: lapl_id + + END FUNCTION h5oexists_by_name_c + END INTERFACE + + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + status = h5oexists_by_name_c(loc_id, name, namelen, lapl_id_default) + + link_exists = .FALSE. + IF(status.EQ.1)THEN + link_exists = .TRUE. + ENDIF + + hdferr = 0 + IF(status.LT.0)THEN + hdferr = -1 + ENDIF + + END SUBROUTINE h5oexists_by_name_f + +!****s* H5O/h5oget_comment_f +! NAME +! h5oget_comment_f +! +! PURPOSE +! Retrieves comment for specified object. +! +! Inputs: +! obj_id - Identifier for the target object. +! +! Optional parameters: +! bufsize - Size of the comment buffer. +! +! Outputs: +! comment - The comment. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 11, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oget_comment_f(obj_id, comment, hdferr, bufsize) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: obj_id + CHARACTER(LEN=*) , INTENT(OUT) :: comment + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HSSIZE_T), INTENT(OUT), OPTIONAL :: bufsize +!***** + + INTEGER(SIZE_T) :: commentsize_default + INTEGER(HSSIZE_T) :: bufsize_default + + INTERFACE + INTEGER FUNCTION h5oget_comment_c(obj_id, comment, commentsize_default, bufsize) & + BIND(C,NAME='h5oget_comment_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSSIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: comment + INTEGER(SIZE_T) , INTENT(IN) :: commentsize_default + INTEGER(HSSIZE_T) , INTENT(OUT) :: bufsize + END FUNCTION h5oget_comment_c + END INTERFACE + + commentsize_default = LEN(comment) + + hdferr = h5oget_comment_c(obj_id, comment, commentsize_default, bufsize_default) + + IF(PRESENT(bufsize)) bufsize = bufsize_default + + END SUBROUTINE h5oget_comment_f + +!****s* H5O/h5oget_comment_by_name_f +! NAME +! h5oget_comment_by_name_f +! +! PURPOSE +! Retrieves comment for specified object. +! +! Inputs: +! loc_id - Identifier of a file, group, dataset, or named datatype. +! name - Name of the object whose comment is to be retrieved, +! specified as a path relative to loc_id. +! +! Optional parameters: +! bufsize - Size of the comment buffer. +! +! Outputs: +! comment - The comment. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! July 6, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oget_comment_by_name_f(loc_id, name, comment, hdferr, bufsize, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + CHARACTER(LEN=*), INTENT(OUT) :: comment + INTEGER , INTENT(OUT) :: hdferr + INTEGER(SIZE_T) , INTENT(OUT), OPTIONAL :: bufsize + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id +!***** + + INTEGER(SIZE_T) :: commentsize_default + INTEGER(SIZE_T) :: name_size + INTEGER(SIZE_T) :: bufsize_default + INTEGER(HID_T) :: lapl_id_default + INTERFACE + INTEGER FUNCTION h5oget_comment_by_name_c(loc_id, name, name_size, & + comment, commentsize_default, bufsize_default, lapl_id) BIND(C,NAME='h5oget_comment_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) , INTENT(IN) :: name_size + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: comment + INTEGER(SIZE_T) , INTENT(IN) :: commentsize_default + INTEGER(SIZE_T) , INTENT(OUT) :: bufsize_default + INTEGER(HID_T) , INTENT(IN) :: lapl_id + END FUNCTION h5oget_comment_by_name_c + END INTERFACE + + commentsize_default = LEN(comment) + name_size = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5oget_comment_by_name_c(loc_id, name, name_size, & + comment, commentsize_default, bufsize_default, lapl_id_default) + + IF(PRESENT(bufsize)) bufsize = bufsize_default + + END SUBROUTINE h5oget_comment_by_name_f + +!****s* H5O/h5oincr_refcount_f +! NAME +! h5oincr_refcount_f +! +! PURPOSE +! Increments an object reference count. +! +! Inputs: +! obj_id - Object identifier. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 15, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oincr_refcount_f(obj_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER , INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5oincr_refcount_c(obj_id) BIND(C,NAME='h5oincr_refcount_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: obj_id + END FUNCTION h5oincr_refcount_c + END INTERFACE + + hdferr = h5oincr_refcount_c(obj_id) + + END SUBROUTINE h5oincr_refcount_f + +!****s* H5O/h5oopen_by_idx_f +! +! NAME +! h5oopen_by_idx_f +! +! PURPOSE +! Open the nth object in a group. +! +! Inputs: +! loc_id - A file or group identifier. +! group_name - Name of group, relative to loc_id, in which object is located. +! index_type - Type of index by which objects are ordered. +! order - Order of iteration within index, NOTE: zero-based. +! n - Object to open. +! +! Outputs: +! obj_id - An object identifier for the opened object. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lapl_id - Link access property list. +! +! AUTHOR +! M. Scot Breitenfeld +! May 17, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oopen_by_idx_f(loc_id, group_name, index_type, order, n, obj_id, & + hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: group_name + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) , INTENT(OUT) :: obj_id + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id +!***** + INTEGER(SIZE_T) :: group_namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5oopen_by_idx_c(loc_id, group_name, group_namelen, index_type, order, n, obj_id, lapl_id_default) & + BIND(C,NAME='h5oopen_by_idx_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER(SIZE_T) , INTENT(IN) :: group_namelen + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) , INTENT(OUT) :: obj_id + INTEGER(HID_T) , INTENT(IN) :: lapl_id_default + + END FUNCTION h5oopen_by_idx_c + END INTERFACE + + group_namelen = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5oopen_by_idx_c(loc_id, group_name, group_namelen, index_type, order, n, obj_id, lapl_id_default) + + END SUBROUTINE H5Oopen_by_idx_f + +!****s* H5O/h5oset_comment_f +! NAME +! h5oset_comment_f +! +! PURPOSE +! Sets comment for specified object. +! +! Inputs: +! obj_id - Identifier of the target object. +! comment - The new comment. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 15, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oset_comment_f(obj_id, comment, hdferr) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: obj_id + CHARACTER(LEN=*), INTENT(IN) :: comment + INTEGER , INTENT(OUT) :: hdferr +!***** + INTEGER(SIZE_T) :: commentlen + + INTERFACE + INTEGER FUNCTION h5oset_comment_c(obj_id, comment, commentlen) BIND(C,NAME='h5oset_comment_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: comment + INTEGER(SIZE_T) , INTENT(IN) :: commentlen + + END FUNCTION h5oset_comment_c + END INTERFACE + + commentlen = LEN(comment) + + hdferr = h5oset_comment_c(obj_id, comment, commentlen) + + END SUBROUTINE h5oset_comment_f + +!****s* H5O/h5oset_comment_by_name_f +! NAME +! h5oset_comment_by_name_f +! +! PURPOSE +! Sets comment for specified object. +! +! Inputs: +! loc_id - Identifier of a file, group, dataset, or named datatype. +! name - Name of the object whose comment is to be set or reset, +! specified as a path relative to loc_id. +! comment - The new comment. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! May 15, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5oset_comment_by_name_f(loc_id, name, comment, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + CHARACTER(LEN=*), INTENT(IN) :: comment + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id +!***** + INTEGER(SIZE_T) :: commentlen + INTEGER(SIZE_T) :: namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5oset_comment_by_name_c(loc_id, name, namelen, comment, commentlen, lapl_id) & + BIND(C,NAME='h5oset_comment_by_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: comment + INTEGER(SIZE_T) , INTENT(IN) :: commentlen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) , INTENT(IN) :: namelen + INTEGER(HID_T) , INTENT(IN) :: lapl_id + END FUNCTION h5oset_comment_by_name_c + END INTERFACE + + commentlen = LEN(comment) + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + hdferr = h5oset_comment_by_name_c(loc_id, name, namelen, comment, commentlen, lapl_id_default) + + END SUBROUTINE h5oset_comment_by_name_f + +!****s* H5O (F03)/h5ovisit_f_F03 +! +! NAME +! h5ovisit_f +! +! PURPOSE +! Recursively visits all objects starting from a specified object. +! +! Inputs: +! object_id - Identifier of the object at which the recursive iteration begins. +! index_type - Type of index; valid values include: +! H5_INDEX_NAME_F +! H5_INDEX_CRT_ORDER_F +! order - Order in which index is traversed; valid values include: +! H5_ITER_DEC_F +! H5_ITER_INC_F +! H5_ITER_NATIVE_F +! op - Callback function passing data regarding the group to the calling application +! op_data - User-defined pointer to data required by the application for its processing of the group +! +! Outputs: +! return_value - returns the return value of the first operator that returns a positive value, or +! zero if all members were processed with no operator returning non-zero. +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! November 19, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5ovisit_f(object_id, index_type, order, op, op_data, return_value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER, INTENT(IN) :: index_type + INTEGER, INTENT(IN) :: order + + TYPE(C_FUNPTR):: op + TYPE(C_PTR) :: op_data + INTEGER, INTENT(OUT) :: return_value + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5ovisit_c(object_id, index_type, order, op, op_data) & + BIND(C, NAME='h5ovisit_c') + IMPORT :: C_FUNPTR, C_PTR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + INTEGER, INTENT(IN) :: index_type + INTEGER, INTENT(IN) :: order + TYPE(C_FUNPTR), VALUE :: op + TYPE(C_PTR), VALUE :: op_data + END FUNCTION h5ovisit_c + END INTERFACE + + return_value = h5ovisit_c(object_id, index_type, order, op, op_data) + + IF(return_value.GE.0)THEN + hdferr = 0 + ELSE + hdferr = -1 + END IF + + END SUBROUTINE h5ovisit_f + +!****s* H5O (F03)/h5oget_info_by_name_f_F03 +! +! NAME +! h5oget_info_by_name_f +! +! PURPOSE +! Retrieves the metadata for an object, identifying the object by location and relative name. +! +! Inputs: +! loc_id - File or group identifier specifying location of group +! in which object is located. +! name - Name of group, relative to loc_id. +! +! Outputs: +! object_info - Buffer in which to return object information. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lapl_id - Link access property list. +! +! AUTHOR +! M. Scot Breitenfeld +! December 1, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5oget_info_by_name_f(loc_id, name, object_info, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id +!***** + INTEGER(SIZE_T) :: namelen + INTEGER(HID_T) :: lapl_id_default + TYPE(C_PTR) :: ptr + + INTERFACE + INTEGER FUNCTION h5oget_info_by_name_c(loc_id, name, namelen, lapl_id_default, object_info) & + BIND(C, NAME='h5oget_info_by_name_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) , INTENT(IN) :: namelen + INTEGER(HID_T) , INTENT(IN) :: lapl_id_default + TYPE(C_PTR),VALUE :: object_info + + END FUNCTION h5oget_info_by_name_c + END INTERFACE + + namelen = LEN(name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + ptr = C_LOC(object_info) + + hdferr = H5Oget_info_by_name_c(loc_id, name, namelen, lapl_id_default, ptr) + + END SUBROUTINE H5Oget_info_by_name_f + +!****s* H5O (F03)/h5oget_info_f_F03 +! +! NAME +! h5oget_info_f +! +! PURPOSE +! Retrieves the metadata for an object specified by an identifier. +! +! Inputs: +! object_id - Identifier for target object. +! +! Outputs: +! object_info - Buffer in which to return object information. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! May 11, 2012 +! +! Fortran2003 Interface: + SUBROUTINE h5oget_info_f(object_id, object_info, hdferr) + + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: object_id + TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info + INTEGER , INTENT(OUT) :: hdferr +!***** + TYPE(C_PTR) :: ptr + + INTERFACE + INTEGER FUNCTION h5oget_info_c(object_id, object_info) & + BIND(C, NAME='h5oget_info_c') + IMPORT :: C_PTR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: object_id + TYPE(C_PTR), VALUE :: object_info + END FUNCTION h5oget_info_c + END INTERFACE + + ptr = C_LOC(object_info) + hdferr = H5Oget_info_c(object_id, ptr) + + END SUBROUTINE H5Oget_info_f + +!****s* H5O (F03)/h5oget_info_by_idx_f_F03 +! +! NAME +! h5oget_info_by_idx_f +! +! PURPOSE +! Retrieves the metadata for an object, identifying the object by an index position. +! +! Inputs: +! loc_id - File or group identifier specifying location of group +! in which object is located. +! group_name - Name of group in which object is located. +! index_field - Index or field that determines the order. +! order - Order within field or index. +! n - Object for which information is to be returned +! +! Outputs: +! object_info - Buffer in which to return object information. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! lapl_id - Link access property list. (Not currently used.) +! +! AUTHOR +! M. Scot Breitenfeld +! May 11, 2012 +! +! Fortran2003 Interface: + SUBROUTINE h5oget_info_by_idx_f(loc_id, group_name, index_field, order, n, & + object_info, hdferr, lapl_id) + + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: group_name + INTEGER , INTENT(IN) :: index_field + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id +!***** + INTEGER(SIZE_T) :: namelen + INTEGER(HID_T) :: lapl_id_default + TYPE(C_PTR) :: ptr + + INTERFACE + INTEGER FUNCTION h5oget_info_by_idx_c(loc_id, group_name, namelen, & + index_field, order, n, lapl_id_default, object_info) BIND(C, NAME='h5oget_info_by_idx_c') + IMPORT :: c_char, c_ptr, c_funptr + IMPORT :: HID_T, SIZE_T, HSIZE_T + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name + INTEGER(SIZE_T) , INTENT(IN) :: namelen + INTEGER , INTENT(IN) :: index_field + INTEGER , INTENT(IN) :: order + INTEGER(HSIZE_T), INTENT(IN) :: n + INTEGER(HID_T) , INTENT(IN) :: lapl_id_default + TYPE(C_PTR), VALUE :: object_info + + END FUNCTION h5oget_info_by_idx_c + END INTERFACE + + namelen = LEN(group_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + ptr = C_LOC(object_info) + hdferr = H5Oget_info_by_idx_c(loc_id, group_name, namelen, index_field, order, n, lapl_id_default, ptr) + + END SUBROUTINE H5Oget_info_by_idx_f + + +!****s* H5O (F03)/h5ovisit_by_name_f_F03 +! +! NAME +! h5ovisit_by_name_f +! +! PURPOSE +! Recursively visits all objects starting from a specified object. +! +! Inputs: +! loc_id - Identifier of a file or group. +! object_name - Name of the object, generally relative to loc_id, that will serve as root of the iteration +! index_type - Type of index; valid values include: +! H5_INDEX_NAME_F +! H5_INDEX_CRT_ORDER_F +! order - Order in which index is traversed; valid values include: +! H5_ITER_DEC_F +! H5_ITER_INC_F +! H5_ITER_NATIVE_F +! op - Callback function passing data regarding the group to the calling application +! op_data - User-defined pointer to data required by the application for its processing of the group +! +! Outputs: +! return_value - Returns the return value of the first operator that returns a positive value, or +! zero if all members were processed with no operator returning non-zero. +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! lapl_id - Link access property list identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! November 19, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5ovisit_by_name_f(loc_id, object_name, index_type, order, op, op_data, & + return_value, hdferr, lapl_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: object_name + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + + TYPE(C_FUNPTR) :: op + TYPE(C_PTR) :: op_data + INTEGER , INTENT(OUT) :: return_value + INTEGER , INTENT(OUT) :: hdferr + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id +!***** + + INTEGER(SIZE_T) :: namelen + INTEGER(HID_T) :: lapl_id_default + + INTERFACE + INTEGER FUNCTION h5ovisit_by_name_c(loc_id, object_name, namelen, index_type, order, & + op, op_data, lapl_id) BIND(C, NAME='h5ovisit_by_name_c') + IMPORT :: C_CHAR, C_PTR, C_FUNPTR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: object_name + INTEGER(SIZE_T) :: namelen + INTEGER , INTENT(IN) :: index_type + INTEGER , INTENT(IN) :: order + TYPE(C_FUNPTR) , VALUE :: op + TYPE(C_PTR) , VALUE :: op_data + INTEGER(HID_T) , INTENT(IN) :: lapl_id + END FUNCTION h5ovisit_by_name_c + END INTERFACE + + namelen = LEN(object_name) + + lapl_id_default = H5P_DEFAULT_F + IF(PRESENT(lapl_id)) lapl_id_default = lapl_id + + return_value = h5ovisit_by_name_c(loc_id, object_name, namelen, index_type, order, & + op, op_data, lapl_id_default) + + IF(return_value.GE.0)THEN + hdferr = 0 + ELSE + hdferr = -1 + END IF + + END SUBROUTINE h5ovisit_by_name_f + +END MODULE H5O + diff --git a/fortran/src/H5Off.f90 b/fortran/src/H5Off.f90 deleted file mode 100644 index 8a40079..0000000 --- a/fortran/src/H5Off.f90 +++ /dev/null @@ -1,775 +0,0 @@ -!****h* ROBODoc/H5O -! -! NAME -! MODULE H5O -! -! FILE -! fortran/src/H5Off.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5O functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5O function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5O - - USE H5GLOBAL - -CONTAINS - -!****s* H5O/h5olink_f -! -! NAME -! h5olink_f -! -! PURPOSE -! Creates a hard link to an object in an HDF5 file. -! -! Inputs: -! object_id - Object to be linked. -! new_loc_id - File or group identifier specifying location at which object is to be linked. -! new_link_name - Name of link to be created, relative to new_loc_id. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lcpl_id - Link creation property list identifier. -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! April 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5olink_f(object_id, new_loc_id, new_link_name, hdferr, lcpl_id, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: object_id - INTEGER(HID_T) , INTENT(IN) :: new_loc_id - CHARACTER(LEN=*), INTENT(IN) :: new_link_name - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lcpl_id - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(HID_T) :: lcpl_id_default - - INTEGER(SIZE_T) :: new_link_namelen - - INTERFACE - INTEGER FUNCTION h5olink_c(object_id, new_loc_id, new_link_name, new_link_namelen, & - lcpl_id_default, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OLINK_C'::h5olink_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: new_link_name - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER(HID_T), INTENT(IN) :: new_loc_id - CHARACTER(LEN=*), INTENT(IN) :: new_link_name - INTEGER(SIZE_T) :: new_link_namelen - INTEGER(HID_T) :: lapl_id_default - INTEGER(HID_T) :: lcpl_id_default - END FUNCTION h5olink_c - END INTERFACE - - new_link_namelen = LEN(new_link_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - - hdferr = h5olink_c(object_id, new_loc_id, new_link_name, new_link_namelen, & - lcpl_id_default, lapl_id_default) - - END SUBROUTINE h5olink_f - -!****s* H5O/h5oopen_f -! -! NAME -! h5oopen_f -! -! PURPOSE -! Opens an object in an HDF5 file by location identifier and path name. -! -! Inputs: -! loc_id - File or group identifier. -! name - Path to the object, relative to loc_id. -! -! Outputs: -! obj_id - Object identifier for the opened object. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lapl_id - Access property list identifier for the link pointing to the object. -! -! AUTHOR -! M. Scot Breitenfeld -! April 18, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5oopen_f(loc_id, name, obj_id, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(HID_T) , INTENT(OUT) :: obj_id - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id -!***** - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - - INTERFACE - INTEGER FUNCTION h5oopen_c(loc_id, name, namelen, lapl_id_default, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OOPEN_C'::h5oopen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(HID_T) :: lapl_id_default - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T), INTENT(OUT) :: obj_id - END FUNCTION h5oopen_c - END INTERFACE - - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5oopen_c(loc_id, name, namelen, lapl_id_default, obj_id) - - END SUBROUTINE h5oopen_f -! -!****s* H5O/h5oclose_f -! -! NAME -! h5oclose_f -! -! PURPOSE -! Closes an object in an HDF5 file. -! -! Inputs: -! object_id - Object identifier. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! December 17, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5oclose_f(object_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5oclose_c(object_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OCLOSE_C'::h5oclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: object_id - END FUNCTION h5oclose_c - END INTERFACE - - hdferr = h5oclose_c(object_id) - END SUBROUTINE h5oclose_f - -! -!****s* H5O/h5open_by_addr_f -! NAME -! h5oopen_by_addr_f -! -! PURPOSE -! Opens an object using its address within an HDF5 file. -! -! Inputs: -! loc_id - File or group identifier. -! addr - Object’s address in the file. -! -! Outputs: -! obj_id - Object identifier for the opened object. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! September 14, 2009 -! -! Fortran90 Interface: - SUBROUTINE h5oopen_by_addr_f(loc_id, addr, obj_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - INTEGER(HADDR_T), INTENT(IN) :: addr - INTEGER(HID_T) , INTENT(OUT) :: obj_id - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5oopen_by_addr_c(loc_id, addr, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OOPEN_BY_ADDR_C'::h5oopen_by_addr_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER(HADDR_T), INTENT(IN) :: addr - INTEGER(HID_T), INTENT(OUT) :: obj_id - END FUNCTION h5oopen_by_addr_c - END INTERFACE - - hdferr = h5oopen_by_addr_c(loc_id, addr, obj_id) - - END SUBROUTINE h5oopen_by_addr_f -! -!****s* H5O/h5ocopy_f -! NAME -! h5ocopy_f -! -! PURPOSE -! Copies an object in an HDF5 file. -! -! Inputs: -! src_loc_id - Object identifier indicating the location of the source object to be copied. -! src_name - Name of the source object to be copied. -! dst_loc_id - Location identifier specifying the destination. -! dst_name - Name to be assigned to the new copy. -! -! Optional parameters: -! ocpypl_id - Object copy property list. -! lcpl_id - Link creation property list for the new hard link. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! March 14, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5ocopy_f(src_loc_id, src_name, dst_loc_id, dst_name, hdferr, ocpypl_id, lcpl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: src_loc_id - CHARACTER(LEN=*), INTENT(IN) :: src_name - INTEGER(HID_T) , INTENT(IN) :: dst_loc_id - CHARACTER(LEN=*), INTENT(IN) :: dst_name - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: ocpypl_id - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lcpl_id -!***** - - INTEGER(SIZE_T) :: src_name_len, dst_name_len - INTEGER(HID_T) :: ocpypl_id_default, lcpl_id_default - - INTERFACE - INTEGER FUNCTION h5ocopy_c(src_loc_id, src_name, src_name_len, & - dst_loc_id, dst_name, dst_name_len, ocpypl_id_default, lcpl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OCOPY_C'::h5ocopy_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: src_name, dst_name - INTEGER(HID_T) , INTENT(IN) :: src_loc_id - CHARACTER(LEN=*), INTENT(IN) :: src_name - INTEGER(HID_T) , INTENT(IN) :: dst_loc_id - CHARACTER(LEN=*), INTENT(IN) :: dst_name - INTEGER(HID_T) , INTENT(IN) :: ocpypl_id_default - INTEGER(HID_T) , INTENT(IN) :: lcpl_id_default - INTEGER(SIZE_T) :: src_name_len, dst_name_len - - END FUNCTION h5ocopy_c - END INTERFACE - - src_name_len = LEN(src_name) - dst_name_len = LEN(dst_name) - - ocpypl_id_default = H5P_DEFAULT_F - IF(PRESENT(ocpypl_id)) ocpypl_id_default = ocpypl_id - lcpl_id_default = H5P_DEFAULT_F - IF(PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - - hdferr = h5ocopy_c(src_loc_id, src_name, src_name_len, & - dst_loc_id, dst_name, dst_name_len, ocpypl_id_default, lcpl_id_default) - - END SUBROUTINE h5ocopy_f - -!****s* H5O/h5odecr_refcount_f -! NAME -! h5odecr_refcount_f -! -! PURPOSE -! Decrements an object reference count. -! -! Inputs: -! object_id - Object identifier. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 11, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5odecr_refcount_f(object_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER , INTENT(OUT) :: hdferr -!***** - - INTERFACE - INTEGER FUNCTION h5odecr_refcount_c(object_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ODECR_REFCOUNT_C'::h5odecr_refcount_c - !DEC$ENDIF - INTEGER(HID_T) , INTENT(IN) :: object_id - END FUNCTION h5odecr_refcount_c - END INTERFACE - - hdferr = h5odecr_refcount_c(object_id) - - END SUBROUTINE h5odecr_refcount_f - -!****s* H5O/h5oexists_by_name_f -! NAME -! h5oexists_by_name_f -! -! PURPOSE -! Determines whether a link resolves to an actual object. -! -! Inputs: -! loc_id - Identifier of the file or group to query. -! name - The name of the link to check. -! -! -! Optional parameters: -! lapl_id - Link access property list identifier. -! -! Outputs: -! link_exists - Existing link resolves to an object. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 11, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oexists_by_name_f(loc_id, name, link_exists, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - LOGICAL , INTENT(OUT) :: link_exists - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id -!***** - - INTEGER(size_t) :: namelen - INTEGER :: status - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5oexists_by_name_c(loc_id, name, namelen, lapl_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OEXISTS_BY_NAME_C'::h5oexists_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) , INTENT(IN) :: namelen - INTEGER(HID_T) , INTENT(IN) :: lapl_id - - END FUNCTION h5oexists_by_name_c - END INTERFACE - - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - status = h5oexists_by_name_c(loc_id, name, namelen, lapl_id_default) - - link_exists = .FALSE. - IF(status.EQ.1)THEN - link_exists = .TRUE. - ENDIF - - hdferr = 0 - IF(status.LT.0)THEN - hdferr = -1 - ENDIF - - END SUBROUTINE h5oexists_by_name_f - -!****s* H5O/h5oget_comment_f -! NAME -! h5oget_comment_f -! -! PURPOSE -! Retrieves comment for specified object. -! -! Inputs: -! obj_id - Identifier for the target object. -! -! Optional parameters: -! bufsize - Size of the comment buffer. -! -! Outputs: -! comment - The comment. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 11, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oget_comment_f(obj_id, comment, hdferr, bufsize) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: obj_id - CHARACTER(LEN=*) , INTENT(OUT) :: comment - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HSSIZE_T), INTENT(OUT), OPTIONAL :: bufsize -!***** - - INTEGER(SIZE_T) :: commentsize_default - INTEGER(HSSIZE_T) :: bufsize_default - - INTERFACE - INTEGER FUNCTION h5oget_comment_c(obj_id, comment, commentsize_default, bufsize) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OGET_COMMENT_C'::h5oget_comment_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: comment - INTEGER(HID_T) , INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(OUT) :: comment - INTEGER(SIZE_T) , INTENT(IN) :: commentsize_default - INTEGER(HSSIZE_T) , INTENT(OUT) :: bufsize - END FUNCTION h5oget_comment_c - END INTERFACE - - commentsize_default = LEN(comment) - - hdferr = h5oget_comment_c(obj_id, comment, commentsize_default, bufsize_default) - - IF(PRESENT(bufsize)) bufsize = bufsize_default - - END SUBROUTINE h5oget_comment_f - -!****s* H5O/h5oget_comment_by_name_f -! NAME -! h5oget_comment_by_name_f -! -! PURPOSE -! Retrieves comment for specified object. -! -! Inputs: -! loc_id - Identifier of a file, group, dataset, or named datatype. -! name - Name of the object whose comment is to be retrieved, -! specified as a path relative to loc_id. -! -! Optional parameters: -! bufsize - Size of the comment buffer. -! -! Outputs: -! comment - The comment. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! July 6, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oget_comment_by_name_f(loc_id, name, comment, hdferr, bufsize, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - CHARACTER(LEN=*), INTENT(OUT) :: comment - INTEGER , INTENT(OUT) :: hdferr - INTEGER(SIZE_T) , INTENT(OUT), OPTIONAL :: bufsize - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id -!***** - - INTEGER(SIZE_T) :: commentsize_default - INTEGER(SIZE_T) :: name_size - INTEGER(SIZE_T) :: bufsize_default - INTEGER(HID_T) :: lapl_id_default - INTERFACE - INTEGER FUNCTION h5oget_comment_by_name_c(loc_id, name, name_size, & - comment, commentsize_default, bufsize_default, lapl_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OGET_COMMENT_BY_NAME_C'::h5oget_comment_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: comment, name - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) , INTENT(IN) :: name_size - CHARACTER(LEN=*), INTENT(OUT) :: comment - INTEGER(SIZE_T) , INTENT(IN) :: commentsize_default - INTEGER(SIZE_T) , INTENT(OUT) :: bufsize_default - INTEGER(HID_T) , INTENT(IN) :: lapl_id - END FUNCTION h5oget_comment_by_name_c - END INTERFACE - - commentsize_default = LEN(comment) - name_size = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5oget_comment_by_name_c(loc_id, name, name_size, & - comment, commentsize_default, bufsize_default, lapl_id_default) - - IF(PRESENT(bufsize)) bufsize = bufsize_default - - END SUBROUTINE h5oget_comment_by_name_f - -!****s* H5O/h5oincr_refcount_f -! NAME -! h5oincr_refcount_f -! -! PURPOSE -! Increments an object reference count. -! -! Inputs: -! obj_id - Object identifier. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 15, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oincr_refcount_f(obj_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER , INTENT(OUT) :: hdferr -!***** - - INTERFACE - INTEGER FUNCTION h5oincr_refcount_c(obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OINCR_REFCOUNT_C'::h5oincr_refcount_c - !DEC$ENDIF - INTEGER(HID_T) , INTENT(IN) :: obj_id - END FUNCTION h5oincr_refcount_c - END INTERFACE - - hdferr = h5oincr_refcount_c(obj_id) - - END SUBROUTINE h5oincr_refcount_f - -!****s* H5O/h5oopen_by_idx_f -! -! NAME -! h5oopen_by_idx_f -! -! PURPOSE -! Open the nth object in a group. -! -! Inputs: -! loc_id - A file or group identifier. -! group_name - Name of group, relative to loc_id, in which object is located. -! index_type - Type of index by which objects are ordered. -! order - Order of iteration within index, NOTE: zero-based. -! n - Object to open. -! -! Outputs: -! obj_id - An object identifier for the opened object. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lapl_id - Link access property list. -! -! AUTHOR -! M. Scot Breitenfeld -! May 17, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oopen_by_idx_f(loc_id, group_name, index_type, order, n, obj_id, & - hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) , INTENT(OUT) :: obj_id - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id -!***** - INTEGER(SIZE_T) :: group_namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5oopen_by_idx_c(loc_id, group_name, group_namelen, index_type, order, n, obj_id, lapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OOPEN_BY_IDX_C'::h5oopen_by_idx_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: group_name - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER(SIZE_T) , INTENT(IN) :: group_namelen - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) , INTENT(OUT) :: obj_id - INTEGER(HID_T) , INTENT(IN) :: lapl_id_default - - END FUNCTION h5oopen_by_idx_c - END INTERFACE - - group_namelen = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5oopen_by_idx_c(loc_id, group_name, group_namelen, index_type, order, n, obj_id, lapl_id_default) - - END SUBROUTINE H5Oopen_by_idx_f - -!****s* H5O/h5oset_comment_f -! NAME -! h5oset_comment_f -! -! PURPOSE -! Sets comment for specified object. -! -! Inputs: -! obj_id - Identifier of the target object. -! comment - The new comment. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 15, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oset_comment_f(obj_id, comment, hdferr) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: comment - INTEGER , INTENT(OUT) :: hdferr -!***** - INTEGER(SIZE_T) :: commentlen - - INTERFACE - INTEGER FUNCTION h5oset_comment_c(obj_id, comment, commentlen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OSET_COMMENT_C'::h5oset_comment_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: comment - INTEGER(HID_T) , INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(IN) :: comment - INTEGER(SIZE_T) , INTENT(IN) :: commentlen - - END FUNCTION h5oset_comment_c - END INTERFACE - - commentlen = LEN(comment) - - hdferr = h5oset_comment_c(obj_id, comment, commentlen) - - END SUBROUTINE h5oset_comment_f - -!****s* H5O/h5oset_comment_by_name_f -! NAME -! h5oset_comment_by_name_f -! -! PURPOSE -! Sets comment for specified object. -! -! Inputs: -! loc_id - Identifier of a file, group, dataset, or named datatype. -! name - Name of the object whose comment is to be set or reset, -! specified as a path relative to loc_id. -! comment - The new comment. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! May 15, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5oset_comment_by_name_f(loc_id, name, comment, hdferr, lapl_id) - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - CHARACTER(LEN=*), INTENT(IN) :: comment - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN), OPTIONAL :: lapl_id -!***** - INTEGER(SIZE_T) :: commentlen - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5oset_comment_by_name_c(loc_id, name, namelen, comment, commentlen, lapl_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5OSET_COMMENT_BY_NAME_C'::h5oset_comment_by_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name, comment - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: comment - INTEGER(SIZE_T) , INTENT(IN) :: commentlen - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T) , INTENT(IN) :: namelen - INTEGER(HID_T) , INTENT(IN) :: lapl_id - END FUNCTION h5oset_comment_by_name_c - END INTERFACE - - commentlen = LEN(comment) - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - hdferr = h5oset_comment_by_name_c(loc_id, name, namelen, comment, commentlen, lapl_id_default) - - END SUBROUTINE h5oset_comment_by_name_f - -END MODULE H5O - diff --git a/fortran/src/H5Off_F03.f90 b/fortran/src/H5Off_F03.f90 deleted file mode 100644 index 36b6246..0000000 --- a/fortran/src/H5Off_F03.f90 +++ /dev/null @@ -1,435 +0,0 @@ -!****h* ROBODoc/H5O (F03) -! -! NAME -! H5O_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5O functions. -! It contains the same functions as H5Off_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Off_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5P function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5O_PROVISIONAL - - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING - - IMPLICIT NONE - -!****t* H5T (F03)/h5o_info_t -! -! Fortran2003 Derived Type: -! - TYPE, BIND(C) :: space_t - INTEGER(hsize_t) :: total ! Total space for storing object header in file - INTEGER(hsize_t) :: meta ! Space within header for object header metadata information - INTEGER(hsize_t) :: mesg ! Space within header for actual message information - INTEGER(hsize_t) :: free ! Free space within object header - END TYPE space_t - - TYPE, BIND(C) :: mesg_t - INTEGER(c_int64_t) :: present ! Flags to indicate presence of message type in header - INTEGER(c_int64_t) :: shared ! Flags to indicate message type is shared in header - END TYPE mesg_t - - TYPE, BIND(C) :: hdr_t - INTEGER :: version ! Version number of header format in file - INTEGER :: nmesgs ! Number of object header messages - INTEGER :: nchunks ! Number of object header chunks - INTEGER :: flags ! Object header status flags - TYPE(space_t) :: space - TYPE(mesg_t) :: mesg - END TYPE hdr_t - - ! Extra metadata storage for obj & attributes - TYPE, BIND(C) :: H5_ih_info_t - INTEGER(hsize_t) :: index_size ! btree and/or list - INTEGER(hsize_t) :: heap_size - END TYPE H5_ih_info_t - - TYPE, BIND(C) :: meta_size_t - TYPE(H5_ih_info_t) :: obj ! v1/v2 B-tree & local/fractal heap for groups, B-tree for chunked datasets - TYPE(H5_ih_info_t) :: attr ! v2 B-tree & heap for attributes - ENDTYPE meta_size_t - - TYPE, BIND(C) :: h5o_info_t - INTEGER(C_LONG) :: fileno ! File number that object is located in - INTEGER(haddr_t) :: addr ! Object address in file - INTEGER(C_INT) :: type ! Basic object type (group, dataset, etc.) - INTEGER :: rc ! Reference count of object - - INTEGER, DIMENSION(8) :: atime ! Access time ! -- NOTE -- - INTEGER, DIMENSION(8) :: mtime ! Modification time ! Returns an integer array - INTEGER, DIMENSION(8) :: ctime ! Change time ! as specified in the Fortran - INTEGER, DIMENSION(8) :: btime ! Birth time ! intrinsic DATE_AND_TIME(VALUES) - - INTEGER(hsize_t) :: num_attrs ! # of attributes attached to object - - TYPE(hdr_t) :: hdr - - TYPE(meta_size_t) :: meta_size - END TYPE h5o_info_t - -!***** - -CONTAINS - -!****s* H5O (F03)/h5ovisit_f_F03 -! -! NAME -! h5ovisit_f -! -! PURPOSE -! Recursively visits all objects starting from a specified object. -! -! Inputs: -! object_id - Identifier of the object at which the recursive iteration begins. -! index_type - Type of index; valid values include: -! H5_INDEX_NAME_F -! H5_INDEX_CRT_ORDER_F -! order - Order in which index is traversed; valid values include: -! H5_ITER_DEC_F -! H5_ITER_INC_F -! H5_ITER_NATIVE_F -! op - Callback function passing data regarding the group to the calling application -! op_data - User-defined pointer to data required by the application for its processing of the group -! -! Outputs: -! return_value - returns the return value of the first operator that returns a positive value, or -! zero if all members were processed with no operator returning non-zero. -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! November 19, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5ovisit_f(object_id, index_type, order, op, op_data, return_value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER, INTENT(IN) :: index_type - INTEGER, INTENT(IN) :: order - - TYPE(C_FUNPTR):: op - TYPE(C_PTR) :: op_data - INTEGER, INTENT(OUT) :: return_value - INTEGER, INTENT(OUT) :: hdferr -!***** - - INTERFACE - INTEGER FUNCTION h5ovisit_c(object_id, index_type, order, op, op_data) & - BIND(C, NAME='h5ovisit_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, c_funptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: object_id - INTEGER, INTENT(IN) :: index_type - INTEGER, INTENT(IN) :: order - TYPE(C_FUNPTR), VALUE :: op - TYPE(C_PTR), VALUE :: op_data - END FUNCTION h5ovisit_c - END INTERFACE - - return_value = h5ovisit_c(object_id, index_type, order, op, op_data) - - IF(return_value.GE.0)THEN - hdferr = 0 - ELSE - hdferr = -1 - END IF - - END SUBROUTINE h5ovisit_f - -!****s* H5O (F03)/h5oget_info_by_name_f_F03 -! -! NAME -! h5oget_info_by_name_f -! -! PURPOSE -! Retrieves the metadata for an object, identifying the object by location and relative name. -! -! Inputs: -! loc_id - File or group identifier specifying location of group -! in which object is located. -! name - Name of group, relative to loc_id. -! -! Outputs: -! object_info - Buffer in which to return object information. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lapl_id - Link access property list. -! -! AUTHOR -! M. Scot Breitenfeld -! December 1, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5oget_info_by_name_f(loc_id, name, object_info, hdferr, lapl_id) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id -!***** - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T) :: lapl_id_default - TYPE(C_PTR) :: ptr - - INTERFACE - INTEGER FUNCTION h5oget_info_by_name_c(loc_id, name, namelen, lapl_id_default, object_info) & - BIND(C, NAME='h5oget_info_by_name_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER(SIZE_T) , INTENT(IN) :: namelen - INTEGER(HID_T) , INTENT(IN) :: lapl_id_default - TYPE(C_PTR),VALUE :: object_info - - END FUNCTION h5oget_info_by_name_c - END INTERFACE - - namelen = LEN(name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - ptr = C_LOC(object_info) - - hdferr = H5Oget_info_by_name_c(loc_id, name, namelen, lapl_id_default, ptr) - - END SUBROUTINE H5Oget_info_by_name_f - -!****s* H5O (F03)/h5oget_info_f_F03 -! -! NAME -! h5oget_info_f -! -! PURPOSE -! Retrieves the metadata for an object specified by an identifier. -! -! Inputs: -! object_id - Identifier for target object. -! -! Outputs: -! object_info - Buffer in which to return object information. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! May 11, 2012 -! -! Fortran2003 Interface: - SUBROUTINE h5oget_info_f(object_id, object_info, hdferr) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: object_id - TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info - INTEGER , INTENT(OUT) :: hdferr -!***** - TYPE(C_PTR) :: ptr - - INTERFACE - INTEGER FUNCTION h5oget_info_c(object_id, object_info) & - BIND(C, NAME='h5oget_info_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - INTEGER(HID_T), INTENT(IN) :: object_id - TYPE(C_PTR), VALUE :: object_info - END FUNCTION h5oget_info_c - END INTERFACE - - ptr = C_LOC(object_info) - hdferr = H5Oget_info_c(object_id, ptr) - - END SUBROUTINE H5Oget_info_f - -!****s* H5O (F03)/h5oget_info_by_idx_f_F03 -! -! NAME -! h5oget_info_by_idx_f -! -! PURPOSE -! Retrieves the metadata for an object, identifying the object by an index position. -! -! Inputs: -! loc_id - File or group identifier specifying location of group -! in which object is located. -! group_name - Name of group in which object is located. -! index_field - Index or field that determines the order. -! order - Order within field or index. -! n - Object for which information is to be returned -! -! Outputs: -! object_info - Buffer in which to return object information. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! lapl_id - Link access property list. (Not currently used.) -! -! AUTHOR -! M. Scot Breitenfeld -! May 11, 2012 -! -! Fortran2003 Interface: - SUBROUTINE h5oget_info_by_idx_f(loc_id, group_name, index_field, order, n, & - object_info, hdferr, lapl_id) - - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: group_name - INTEGER , INTENT(IN) :: index_field - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - TYPE(h5o_info_t), INTENT(OUT), TARGET :: object_info - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id -!***** - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T) :: lapl_id_default - TYPE(C_PTR) :: ptr - - INTERFACE - INTEGER FUNCTION h5oget_info_by_idx_c(loc_id, group_name, namelen, & - index_field, order, n, lapl_id_default, object_info) BIND(C, NAME='h5oget_info_by_idx_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr, c_funptr - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: group_name - INTEGER(SIZE_T) , INTENT(IN) :: namelen - INTEGER , INTENT(IN) :: index_field - INTEGER , INTENT(IN) :: order - INTEGER(HSIZE_T), INTENT(IN) :: n - INTEGER(HID_T) , INTENT(IN) :: lapl_id_default - TYPE(C_PTR), VALUE :: object_info - - END FUNCTION h5oget_info_by_idx_c - END INTERFACE - - namelen = LEN(group_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - ptr = C_LOC(object_info) - hdferr = H5Oget_info_by_idx_c(loc_id, group_name, namelen, index_field, order, n, lapl_id_default, ptr) - - END SUBROUTINE H5Oget_info_by_idx_f - - -!****s* H5O (F03)/h5ovisit_by_name_f_F03 -! -! NAME -! h5ovisit_by_name_f -! -! PURPOSE -! Recursively visits all objects starting from a specified object. -! -! Inputs: -! loc_id - Identifier of a file or group. -! object_name - Name of the object, generally relative to loc_id, that will serve as root of the iteration -! index_type - Type of index; valid values include: -! H5_INDEX_NAME_F -! H5_INDEX_CRT_ORDER_F -! order - Order in which index is traversed; valid values include: -! H5_ITER_DEC_F -! H5_ITER_INC_F -! H5_ITER_NATIVE_F -! op - Callback function passing data regarding the group to the calling application -! op_data - User-defined pointer to data required by the application for its processing of the group -! -! Outputs: -! return_value - Returns the return value of the first operator that returns a positive value, or -! zero if all members were processed with no operator returning non-zero. -! hdferr - Returns 0 if successful and -1 if fails -! -! Optional parameters: -! lapl_id - Link access property list identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! November 19, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5ovisit_by_name_f(loc_id, object_name, index_type, order, op, op_data, & - return_value, hdferr, lapl_id) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: object_name - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - - TYPE(C_FUNPTR) :: op - TYPE(C_PTR) :: op_data - INTEGER , INTENT(OUT) :: return_value - INTEGER , INTENT(OUT) :: hdferr - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: lapl_id -!***** - - INTEGER(SIZE_T) :: namelen - INTEGER(HID_T) :: lapl_id_default - - INTERFACE - INTEGER FUNCTION h5ovisit_by_name_c(loc_id, object_name, namelen, index_type, order, & - op, op_data, lapl_id) BIND(C, NAME='h5ovisit_by_name_c') - USE, INTRINSIC :: ISO_C_BINDING - USE H5GLOBAL - INTEGER(HID_T) , INTENT(IN) :: loc_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: object_name - INTEGER(SIZE_T) :: namelen - INTEGER , INTENT(IN) :: index_type - INTEGER , INTENT(IN) :: order - TYPE(C_FUNPTR) , VALUE :: op - TYPE(C_PTR) , VALUE :: op_data - INTEGER(HID_T) , INTENT(IN) :: lapl_id - END FUNCTION h5ovisit_by_name_c - END INTERFACE - - namelen = LEN(object_name) - - lapl_id_default = H5P_DEFAULT_F - IF(PRESENT(lapl_id)) lapl_id_default = lapl_id - - return_value = h5ovisit_by_name_c(loc_id, object_name, namelen, index_type, order, & - op, op_data, lapl_id_default) - - IF(return_value.GE.0)THEN - hdferr = 0 - ELSE - hdferr = -1 - END IF - - END SUBROUTINE h5ovisit_by_name_f - -END MODULE H5O_PROVISIONAL - diff --git a/fortran/src/H5Off_F90.f90 b/fortran/src/H5Off_F90.f90 deleted file mode 100644 index 5688c5d..0000000 --- a/fortran/src/H5Off_F90.f90 +++ /dev/null @@ -1,39 +0,0 @@ -!****h* ROBODoc/H5O (F90) -! -! NAME -! MODULE H5O_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5O functions. It contains -! the same functions as H5Off_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Off_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! NOTE -! Currently contains no functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5O_PROVISIONAL - -END MODULE H5O_PROVISIONAL diff --git a/fortran/src/H5Pf.c b/fortran/src/H5Pf.c index fe2f21a..9735f48 100644 --- a/fortran/src/H5Pf.c +++ b/fortran/src/H5Pf.c @@ -1,6 +1,6 @@ /****h* H5Pf/H5Pf * PURPOSE - * This file contains C stubs for H5P Fortran APIs + * This file contains C stubs for H5P Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -23,18 +23,35 @@ #include "H5f90.h" #include "H5Eprivate.h" +#include "H5public.h" + +#ifdef H5_HAVE_PARALLEL + +#include +/* Support for C to Fortran translation in MPI */ +#ifndef H5_HAVE_MPI_MULTI_LANG_Comm +#define MPI_Comm_c2f(comm) (int_f)(comm) +#define MPI_Comm_f2c(comm) (MPI_Comm)(comm) +#endif /*MPI Comm*/ + +#ifndef H5_HAVE_MPI_MULTI_LANG_Info +#define MPI_Info_c2f(info) (int_f)(info) +#define MPI_Info_f2c(info) (MPI_Info)(info) +#endif /*MPI Info*/ + +#endif /*H5_HAVE_PARALLEL*/ /****if* H5Pf/h5pcreate_c * NAME - * h5pcreate_c + * h5pcreate_c * PURPOSE - * Call H5Pcreate to create a property list + * Call H5Pcreate to create a property list * INPUTS - * cls - property list class identifier + * cls - property list class identifier * OUTPUTS - * prp_id - identifier of the created property list + * prp_id - identifier of the created property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Wednesday, October 9, 2002 @@ -43,7 +60,7 @@ */ int_f -nh5pcreate_c ( hid_t_f *cls, hid_t_f *prp_id ) +h5pcreate_c ( hid_t_f *cls, hid_t_f *prp_id ) /******/ { hid_t c_prp_id; @@ -61,22 +78,22 @@ done: /****if* H5Pf/h5pclose_c * NAME - * h5pclose_c + * h5pclose_c * PURPOSE - * Call H5Pclose to close property lis + * Call H5Pclose to close property lis * INPUTS - * prp_id - identifier of the property list to be closed + * prp_id - identifier of the property list to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * * SOURCE */ int_f -nh5pclose_c ( hid_t_f *prp_id ) +h5pclose_c ( hid_t_f *prp_id ) /******/ { int_f ret_value = 0; @@ -90,23 +107,23 @@ nh5pclose_c ( hid_t_f *prp_id ) /****if* H5Pf/h5pcopy_c * NAME - * h5pcopy_c + * h5pcopy_c * PURPOSE - * Call H5Pcopy to copy property list + * Call H5Pcopy to copy property list * INPUTS - * prp_id - identifier of the property list to be copied + * prp_id - identifier of the property list to be copied * OUTPUTS - * new_prp_id - identifier of the new property list + * new_prp_id - identifier of the new property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * * SOURCE */ int_f -nh5pcopy_c ( hid_t_f *prp_id , hid_t_f *new_prp_id) +h5pcopy_c ( hid_t_f *prp_id , hid_t_f *new_prp_id) /******/ { hid_t c_new_prp_id; @@ -124,24 +141,24 @@ done: /****if* H5Pf/h5pequal_c * NAME - * h5pequal_c + * h5pequal_c * PURPOSE - * Call H5Pequal to check if two property lists are equal + * Call H5Pequal to check if two property lists are equal * INPUTS - * plist1_id - property list identifier - * plist2_id - property list identifier + * plist1_id - property list identifier + * plist2_id - property list identifier * OUTPUTS - * c_flag - flag to indicate that lists are eqaul + * c_flag - flag to indicate that lists are eqaul * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, September 30, 2002 + * Monday, September 30, 2002 * * SOURCE */ int_f -nh5pequal_c ( hid_t_f *plist1_id , hid_t_f *plist2_id, int_f * c_flag) +h5pequal_c ( hid_t_f *plist1_id , hid_t_f *plist2_id, int_f * c_flag) /******/ { htri_t c_c_flag; @@ -176,7 +193,7 @@ done: */ int_f -nh5pget_class_c ( hid_t_f *prp_id , hid_t_f *classtype) +h5pget_class_c ( hid_t_f *prp_id , hid_t_f *classtype) /******/ { hid_t c_classtype; @@ -193,15 +210,15 @@ done: /****if* H5Pf/h5pset_preserve_c * NAME - * h5pset_preserve_c + * h5pset_preserve_c * PURPOSE - * Call H5Pset_preserve to set transfer property for compound - * datatype + * Call H5Pset_preserve to set transfer property for compound + * datatype * INPUTS - * prp_id - property list identifier - * flag - TRUE/FALSE flag + * prp_id - property list identifier + * flag - TRUE/FALSE flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Thursday, February 17, 2000 @@ -209,7 +226,7 @@ done: */ int_f -nh5pset_preserve_c ( hid_t_f *prp_id , int_f *flag) +h5pset_preserve_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = 0; @@ -227,16 +244,16 @@ nh5pset_preserve_c ( hid_t_f *prp_id , int_f *flag) /****if* H5Pf/h5pget_preserve_c * NAME - * h5pget_preserve_c + * h5pget_preserve_c * PURPOSE - * Call H5Pget_preserve to set transfer property for compound - * datatype + * Call H5Pget_preserve to set transfer property for compound + * datatype * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * flag - TRUE/FALSE flag + * flag - TRUE/FALSE flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Thursday, February 17, 2000 @@ -244,7 +261,7 @@ nh5pset_preserve_c ( hid_t_f *prp_id , int_f *flag) */ int_f -nh5pget_preserve_c ( hid_t_f *prp_id , int_f *flag) +h5pget_preserve_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = 0; @@ -260,22 +277,22 @@ nh5pget_preserve_c ( hid_t_f *prp_id , int_f *flag) /****if* H5Pf/h5pset_deflate_c * NAME - * h5pset_deflate_c + * h5pset_deflate_c * PURPOSE - * Call H5Pset_deflate to set deflate level + * Call H5Pset_deflate to set deflate level * INPUTS - * prp_id - property list identifier - * level - level of deflation + * prp_id - property list identifier + * level - level of deflation * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * SOURCE */ int_f -nh5pset_deflate_c ( hid_t_f *prp_id , int_f *level) +h5pset_deflate_c ( hid_t_f *prp_id , int_f *level) /******/ { int ret_value = 0; @@ -294,24 +311,24 @@ nh5pset_deflate_c ( hid_t_f *prp_id , int_f *level) /****if* H5Pf/h5pset_chunk_c * NAME - * h5pset_chunk_c + * h5pset_chunk_c * PURPOSE - * Call H5Pset_chunk to set the sizes of chunks for a chunked - * layout dataset + * Call H5Pset_chunk to set the sizes of chunks for a chunked + * layout dataset * INPUTS - * prp_id - property list identifier - * rank - number of dimensions of each chunk - * dims - array of the size of each chunk + * prp_id - property list identifier + * rank - number of dimensions of each chunk + * dims - array of the size of each chunk * RETURNS - * 0 on success, -1 on failure - * Saturday, August 14, 1999 + * 0 on success, -1 on failure + * Saturday, August 14, 1999 * AUTHOR * Elena Pourmal * SOURCE */ int_f -nh5pset_chunk_c ( hid_t_f *prp_id, int_f *rank, hsize_t_f *dims ) +h5pset_chunk_c ( hid_t_f *prp_id, int_f *rank, hsize_t_f *dims ) /******/ { int ret_value = -1; @@ -338,24 +355,24 @@ DONE: /****if* H5Pf/h5pget_chunk_c * NAME - * h5pget_chunk_c + * h5pget_chunk_c * PURPOSE - * Call H5Pget_chunk to get the sizes of chunks for a chunked - * layout dataset for at list max_rank number of dimensions + * Call H5Pget_chunk to get the sizes of chunks for a chunked + * layout dataset for at list max_rank number of dimensions * INPUTS - * prp_id - property list identifier - * max rank - maximum number of dimensions to return - * dims - array of the size of each chunk + * prp_id - property list identifier + * max rank - maximum number of dimensions to return + * dims - array of the size of each chunk * RETURNS - * number of chunk's dimnesion on success, -1 on failure - * Saturday, August 14, 1999 + * number of chunk's dimnesion on success, -1 on failure + * Saturday, August 14, 1999 * AUTHOR * Elena Pourmal * SOURCE */ int_f -nh5pget_chunk_c ( hid_t_f *prp_id, int_f *max_rank, hsize_t_f *dims ) +h5pget_chunk_c ( hid_t_f *prp_id, int_f *max_rank, hsize_t_f *dims ) /******/ { int ret_value = -1; @@ -377,36 +394,6 @@ nh5pget_chunk_c ( hid_t_f *prp_id, int_f *max_rank, hsize_t_f *dims ) return ret_value; } -/****if* H5Pf/h5pset_fill_valuec_c - * NAME - * h5pset_fill_valuec_c - * PURPOSE - * Call h5pset_fill_value_c to a character fill value - * INPUTS - * prp_id - property list identifier - * type_id - datatype identifier (fill value is of type type_id) - * fillvalue - character value - * RETURNS - * 0 on success, -1 on failure - * Saturday, August 14, 1999 - * AUTHOR - * Elena Pourmal - * SOURCE -*/ -int_f -nh5pset_fill_valuec_c (hid_t_f *prp_id, hid_t_f *type_id, _fcd fillvalue) -/******/ -{ - int ret_value = -1; - - /* - * Call h5pset_fill_value_c function. - */ - ret_value = h5pset_fill_value_c(prp_id, type_id, _fcdtocp(fillvalue)); - - return ret_value; -} - /****if* H5Pf/h5pset_fill_value_c * NAME * h5pset_fill_value_c @@ -444,68 +431,6 @@ h5pset_fill_value_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) return ret_value; } -int_f -nh5pset_fill_value_integer_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -/******/ -{ - /* - * Call h5pset_fill_value_c function. - */ - return h5pset_fill_value_c(prp_id, type_id, fillvalue); -} - -int_f -nh5pset_fill_value_real_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -{ - /* - * Call h5pset_fill_value_c function. - */ - return h5pset_fill_value_c(prp_id, type_id, fillvalue); -} - -int_f -nh5pset_fill_value_double_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -{ - /* - * Call h5pset_fill_value_c function. - */ - return h5pset_fill_value_c(prp_id, type_id, fillvalue); -} - -/****if* H5Pf/h5pget_fill_valuec_c - * NAME - * h5pget_fill_valuec_c - * PURPOSE - * Call h5pget_fill_value_c to a character fill value - * INPUTS - * prp_id - property list identifier - * type_id - datatype identifier (fill value is of type type_id) - * fillvalue - character value - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Saturday, August 14, 1999 - * HISTORY - * Fixed wrong call to C wrapper, was nh5pset_fill_value_c, changed - * to nh5pget_fill_value_c. MSB - 7/21/2014 - * - * SOURCE -*/ -int_f -nh5pget_fill_valuec_c (hid_t_f *prp_id, hid_t_f *type_id, _fcd fillvalue) -/******/ -{ - int ret_value = -1; - - /* - * Call h5pget_fill_value_c function. - */ - ret_value = h5pget_fill_value_c(prp_id, type_id, _fcdtocp(fillvalue)); - - return ret_value; -} - /****if* H5Pf/h5pget_fill_value_c * NAME * h5pget_fill_value_c @@ -543,57 +468,30 @@ h5pget_fill_value_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) return ret_value; } -int_f -nh5pget_fill_value_integer_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -{ - /* - * Call h5pget_fill_value_c function. - */ - return h5pget_fill_value_c(prp_id, type_id, fillvalue); -} - -int_f -nh5pget_fill_value_real_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -{ - /* - * Call h5pget_fill_value_c function. - */ - return h5pget_fill_value_c(prp_id, type_id, fillvalue); -} - -int_f -nh5pget_fill_value_double_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue) -{ - /* - * Call h5pget_fill_value_c function. - */ - return h5pget_fill_value_c(prp_id, type_id, fillvalue); -} - /****if* H5Pf/h5pget_version_c * NAME - * h5pget_version_c + * h5pget_version_c * PURPOSE - * Call H5Pget_version to get the version information - * of various objects for a file creation property list + * Call H5Pget_version to get the version information + * of various objects for a file creation property list * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * boot - array to put boot block version number - * freelist - array to put global freelist version number - * stab - array to put symbol table version number - * shhdr - array to put shared object header version number + * boot - array to put boot block version number + * freelist - array to put global freelist version number + * stab - array to put symbol table version number + * shhdr - array to put shared object header version number * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * HISTORY - * Removed extra length parameters EP 7/6/00 + * Removed extra length parameters EP 7/6/00 * SOURCE */ int_f -nh5pget_version_c (hid_t_f *prp_id, int_f * boot,int_f * freelist, int_f * stab, int_f *shhdr) +h5pget_version_c (hid_t_f *prp_id, int_f * boot,int_f * freelist, int_f * stab, int_f *shhdr) /******/ { int ret_value = -1; @@ -630,22 +528,22 @@ nh5pget_version_c (hid_t_f *prp_id, int_f * boot,int_f * freelist, int_f * stab, /****if* H5Pf/h5pget_userblock_c * NAME - * h5pget_userblock_c + * h5pget_userblock_c * PURPOSE - * Call H5Pget_userblock to get the size of a user block in - * a file creation property list + * Call H5Pget_userblock to get the size of a user block in + * a file creation property list * INPUTS - * prp_id - property list identifier - * Outputs size - Size of the user-block in bytes + * prp_id - property list identifier + * Outputs size - Size of the user-block in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * SOURCE */ int_f -nh5pget_userblock_c (hid_t_f *prp_id, hsize_t_f * size) +h5pget_userblock_c (hid_t_f *prp_id, hsize_t_f * size) /******/ { int ret_value = -1; @@ -668,22 +566,22 @@ nh5pget_userblock_c (hid_t_f *prp_id, hsize_t_f * size) /****if* H5Pf/h5pset_userblock_c * NAME - * h5pset_userblock_c + * h5pset_userblock_c * PURPOSE - * Call H5Pset_userblock to set the size of a user block in - * a file creation property list + * Call H5Pset_userblock to set the size of a user block in + * a file creation property list * INPUTS - * prp_id - property list identifier - * size - Size of the user-block in bytes + * prp_id - property list identifier + * size - Size of the user-block in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * SOURCE */ int_f -nh5pset_userblock_c (hid_t_f *prp_id, hsize_t_f * size) +h5pset_userblock_c (hid_t_f *prp_id, hsize_t_f * size) /******/ { int ret_value = -1; @@ -705,25 +603,25 @@ nh5pset_userblock_c (hid_t_f *prp_id, hsize_t_f * size) /****if* H5Pf/h5pget_sizes_c * NAME - * h5pget_sizes_c + * h5pget_sizes_c * PURPOSE - * Call H5Pget_sizes to get the size of the offsets - * and lengths used in an HDF5 file + * Call H5Pget_sizes to get the size of the offsets + * and lengths used in an HDF5 file * INPUTS - * prp_id - property list identifier - * Outputs sizeof_addr - Size of an object offset in bytes - * sizeof_size - Size of an object length in bytes + * prp_id - property list identifier + * Outputs sizeof_addr - Size of an object offset in bytes + * sizeof_size - Size of an object length in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * HISTORY - * Deleted extra length parameters. EP 6/7/00 + * Deleted extra length parameters. EP 6/7/00 * SOURCE */ int_f -nh5pget_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size) +h5pget_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size) /******/ { int ret_value = -1; @@ -748,24 +646,24 @@ nh5pget_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size /****if* H5Pf/h5pset_sizes_c * NAME - * h5pset_sizes_c + * h5pset_sizes_c * PURPOSE - * Call H5Pset_sizes to set the size of the offsets + * Call H5Pset_sizes to set the size of the offsets * INPUTS - * prp_id - property list identifier - * sizeof_addr - Size of an object offset in bytes - * sizeof_size - Size of an object length in bytes + * prp_id - property list identifier + * sizeof_addr - Size of an object offset in bytes + * sizeof_size - Size of an object length in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size) +h5pset_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size) /******/ { int ret_value = -1; @@ -788,23 +686,23 @@ nh5pset_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size /****if* H5Pf/h5pset_sym_k_c * NAME - * h5pset_sym_k_c + * h5pset_sym_k_c * PURPOSE - * Call H5Pset_sym_k to set the size of parameters used - * to control the symbol table node + * Call H5Pset_sym_k to set the size of parameters used + * to control the symbol table node * INPUTS - * prp_id - property list identifier - * ik - Symbol table tree rank - * lk - Symbol table node size + * prp_id - property list identifier + * ik - Symbol table tree rank + * lk - Symbol table node size * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * SOURCE */ int_f -nh5pset_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) +h5pset_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) /******/ { int ret_value = -1; @@ -828,26 +726,26 @@ nh5pset_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) /****if* H5Pf/h5pget_sym_k_c * NAME - * h5pget_sym_k_c + * h5pget_sym_k_c * PURPOSE - * Call H5Pget_sym_k to get the size of parameters used - * to control the symbol table node + * Call H5Pget_sym_k to get the size of parameters used + * to control the symbol table node * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * ik - Symbol table tree rank - * lk - Symbol table node size + * ik - Symbol table tree rank + * lk - Symbol table node size * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) +h5pget_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) /******/ { int ret_value = -1; @@ -870,24 +768,24 @@ nh5pget_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk) /****if* H5Pf/h5pset_istore_k_c * NAME - * h5pset_istore_k_c + * h5pset_istore_k_c * PURPOSE - * Call H5Pset_istore_k to set the size of the parameter - * used to control the B-trees for indexing chunked datasets + * Call H5Pset_istore_k to set the size of the parameter + * used to control the B-trees for indexing chunked datasets * INPUTS - * prp_id - property list identifier - * ik - Symbol table tree rank + * prp_id - property list identifier + * ik - Symbol table tree rank * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_istore_k_c (hid_t_f *prp_id, int_f* ik) +h5pset_istore_k_c (hid_t_f *prp_id, int_f* ik) /******/ { int ret_value = -1; @@ -909,25 +807,25 @@ nh5pset_istore_k_c (hid_t_f *prp_id, int_f* ik) /****if* H5Pf/h5pget_istore_k_c * NAME - * h5pget_istore_k_c + * h5pget_istore_k_c * PURPOSE - * Call H5Pget_istore_k to get the size of parameters used - * to control the B-trees for indexing chunked datasets + * Call H5Pget_istore_k to get the size of parameters used + * to control the B-trees for indexing chunked datasets * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * ik - Symbol table tree rank + * ik - Symbol table tree rank * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_istore_k_c (hid_t_f *prp_id, int_f* ik) +h5pget_istore_k_c (hid_t_f *prp_id, int_f* ik) /******/ { int ret_value = -1; @@ -948,24 +846,24 @@ nh5pget_istore_k_c (hid_t_f *prp_id, int_f* ik) /****if* H5Pf/h5pget_driver_c * NAME - * h5pget_driver_c + * h5pget_driver_c * PURPOSE - * Call H5Pget_driver to get low-level file driver identifier + * Call H5Pget_driver to get low-level file driver identifier * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * driver - low-level file driver identifier + * driver - low-level file driver identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_driver_c (hid_t_f *prp_id, hid_t_f* driver) +h5pget_driver_c (hid_t_f *prp_id, hid_t_f* driver) /******/ { int ret_value = -1; @@ -986,23 +884,23 @@ DONE: /****if* H5Pf/h5pset_fapl_stdio_c * NAME - * h5pset_fapl_stdio_c + * h5pset_fapl_stdio_c * PURPOSE - * Call H5Pset_stdio to set the low level file driver to - * use the functions declared in the stdio.h + * Call H5Pset_stdio to set the low level file driver to + * use the functions declared in the stdio.h * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 7, 2001 + * March 7, 2001 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_stdio_c (hid_t_f *prp_id) +h5pset_fapl_stdio_c (hid_t_f *prp_id) /******/ { int ret_value = -1; @@ -1020,26 +918,26 @@ nh5pset_fapl_stdio_c (hid_t_f *prp_id) #ifdef NO_SUCH_F90_FUNCTION /****if* H5Pf/h5pget_fapl_stdio_c * NAME - * h5pget_fapl_stdio_c + * h5pget_fapl_stdio_c * PURPOSE - * Call H5Pget_fapl_stdio to determine whther the low level file driver - * uses the functions declared in the stdio.h + * Call H5Pget_fapl_stdio to determine whther the low level file driver + * uses the functions declared in the stdio.h * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * io - value indicates whether the file driver uses - * the functions declared in the stdio.h + * io - value indicates whether the file driver uses + * the functions declared in the stdio.h * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_stdio_c (hid_t_f *prp_id, int_f* io) +h5pget_fapl_stdio_c (hid_t_f *prp_id, int_f* io) /******/ { int ret_value = -1; @@ -1060,23 +958,23 @@ nh5pget_fapl_stdio_c (hid_t_f *prp_id, int_f* io) /****if* H5Pf/h5pset_fapl_sec2_c * NAME - * h5pset_fapl_sec2_c + * h5pset_fapl_sec2_c * PURPOSE - * Call H5Pset_fapl_sec2 to set the low level file driver to - * use the functions declared in the unistd.h + * Call H5Pset_fapl_sec2 to set the low level file driver to + * use the functions declared in the unistd.h * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_sec2_c (hid_t_f *prp_id) +h5pset_fapl_sec2_c (hid_t_f *prp_id) /******/ { int ret_value = -1; @@ -1095,26 +993,26 @@ nh5pset_fapl_sec2_c (hid_t_f *prp_id) #ifdef NO_SUCH_F90_FUNCTION /****if* H5Pf/h5pget_fapl_sec2_c * NAME - * h5pget_fapl_sec2_c + * h5pget_fapl_sec2_c * PURPOSE - * Call H5Pget_fapl_stdio to determine whther the low level file driver - * uses the functions declared in the unistd.h + * Call H5Pget_fapl_stdio to determine whther the low level file driver + * uses the functions declared in the unistd.h * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * sec2 - value indicates whether the file driver uses - * the functions declared in the unistd.h + * sec2 - value indicates whether the file driver uses + * the functions declared in the unistd.h * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_sec2_c (hid_t_f *prp_id, int_f* sec2) +h5pget_fapl_sec2_c (hid_t_f *prp_id, int_f* sec2) /******/ { int ret_value = -1; @@ -1134,25 +1032,25 @@ nh5pget_fapl_sec2_c (hid_t_f *prp_id, int_f* sec2) /****if* H5Pf/h5pset_alignment_c * NAME - * h5pset_alignment_c + * h5pset_alignment_c * PURPOSE - * Call H5Pset_alignment to set alignment properties of - * a file access property list + * Call H5Pset_alignment to set alignment properties of + * a file access property list * INPUTS - * prp_id - property list identifier - * threshold - Threshold value - * alignment - Alignment value + * prp_id - property list identifier + * threshold - Threshold value + * alignment - Alignment value * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment) +h5pset_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment) /******/ { int ret_value = -1; @@ -1173,25 +1071,25 @@ nh5pset_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment /****if* H5Pf/h5pget_alignment_c * NAME - * h5pget_alignment_c + * h5pget_alignment_c * PURPOSE - * Call H5Pget_alignment to get alignment properties of - * a file access property list + * Call H5Pget_alignment to get alignment properties of + * a file access property list * INPUTS - * prp_id - property list identifier - * threshold - Threshold value - * alignment - Alignment value + * prp_id - property list identifier + * threshold - Threshold value + * alignment - Alignment value * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment) +h5pget_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment) /******/ { int ret_value = -1; @@ -1213,26 +1111,26 @@ nh5pget_alignment_c (hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment /****if* H5Pf/h5pset_fapl_core_c * NAME - * h5pset_fapl_core_c + * h5pset_fapl_core_c * PURPOSE - * Call H5Pset_fapl_core to set the low-level file driver - * to use malloc() and free() + * Call H5Pset_fapl_core to set the low-level file driver + * to use malloc() and free() * INPUTS - * prp_id - property list identifier - * increment - File block size in bytes - * flag - Boolean flag indicating whether to write the - * file contents to disk when the file is closed. + * prp_id - property list identifier + * increment - File block size in bytes + * flag - Boolean flag indicating whether to write the + * file contents to disk when the file is closed. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) +h5pset_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) /******/ { int ret_value = -1; @@ -1255,24 +1153,24 @@ nh5pset_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) /****if* H5Pf/h5pget_fapl_core_c * NAME - * h5pget_fapl_core_c + * h5pget_fapl_core_c * PURPOSE - * Call H5Pget_fapl_core to determine whether the file access - * property list is set to the core drive + * Call H5Pget_fapl_core to determine whether the file access + * property list is set to the core drive * INPUTS - * prp_id - property list identifier - * Outputs increment - File block size in bytes + * prp_id - property list identifier + * Outputs increment - File block size in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) +h5pget_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) /******/ { int ret_value = -1; @@ -1295,26 +1193,26 @@ nh5pget_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag) /****if* H5Pf/h5pset_fapl_family_c * NAME - * h5pset_fapl_family_c + * h5pset_fapl_family_c * PURPOSE - * Call H5Pset_fapl_family to set the file access properties list - * to the family driver + * Call H5Pset_fapl_family to set the file access properties list + * to the family driver * INPUTS - * prp_id - property list identifier - * memb_size - Logical size, in bytes, of each family member. - * memb_plist - Identifier of the file access property list - * for each member of the family + * prp_id - property list identifier + * memb_size - Logical size, in bytes, of each family member. + * memb_plist - Identifier of the file access property list + * for each member of the family * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ) +h5pset_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ) /******/ { int ret_value = -1; @@ -1336,26 +1234,26 @@ nh5pset_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist /****if* H5Pf/h5pget_fapl_family_c * NAME - * h5pget_fapl_family_c + * h5pget_fapl_family_c * PURPOSE - * Call H5Pget_fapl_family to determine whether the file access - * property list is set to the family driver + * Call H5Pget_fapl_family to determine whether the file access + * property list is set to the family driver * INPUTS - * prp_id - property list identifier - * memb_size - Logical size, in bytes, of each family member. - * memb_plist - Identifier of the file access property list - * for each member of the family + * prp_id - property list identifier + * memb_size - Logical size, in bytes, of each family member. + * memb_plist - Identifier of the file access property list + * for each member of the family * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist) +h5pget_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist) /******/ { int ret_value = -1; @@ -1378,29 +1276,29 @@ nh5pget_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist /****if* H5Pf/h5pset_cache_c * NAME - * h5pset_cache_c + * h5pset_cache_c * PURPOSE - * Call H5Pset_cache to set he number of elements in - * the meta data cache and the total number of bytes in - * the raw data chunk cache + * Call H5Pset_cache to set he number of elements in + * the meta data cache and the total number of bytes in + * the raw data chunk cache * INPUTS - * prp_id - property list identifier - * mdc_nelmts - Number of elements (objects) in the - * meta data cache - * rdcc_nbytes - Total size of the raw data chunk cache, in bytes - * rdcc_w0 - Preemption policy + * prp_id - property list identifier + * mdc_nelmts - Number of elements (objects) in the + * meta data cache + * rdcc_nbytes - Total size of the raw data chunk cache, in bytes + * rdcc_w0 - Preemption policy * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY - * Changed the type of the rdcc_w0 parameter to be real_f EP 7/7/00 - * instead of double + * Changed the type of the rdcc_w0 parameter to be real_f EP 7/7/00 + * instead of double * SOURCE */ int_f -nh5pset_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes , real_f* rdcc_w0 ) +h5pset_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes , real_f* rdcc_w0 ) /******/ { int ret_value = -1; @@ -1427,32 +1325,32 @@ nh5pset_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size /****if* H5Pf/h5pget_cache_c * NAME - * h5pget_cache_c + * h5pget_cache_c * PURPOSE - * Call H5Pget_cache to get he number of elements in - * the meta data cache and the total number of bytes in - * the raw data chunk cache + * Call H5Pget_cache to get he number of elements in + * the meta data cache and the total number of bytes in + * the raw data chunk cache * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * mdc_nelmts - Number of elements (objects) in the - * meta data cache - * rdcc_nelmts - Number of elements in the raw data chunk - * rdcc_nbytes - Total size of the raw data chunk cache, in bytes - * rdcc_w0 - Preemption policy + * mdc_nelmts - Number of elements (objects) in the + * meta data cache + * rdcc_nelmts - Number of elements in the raw data chunk + * rdcc_nbytes - Total size of the raw data chunk cache, in bytes + * rdcc_w0 - Preemption policy * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY - * Changed type of the rdcc_w0 parameter to be real_f instead of double - * Changed type of the rdcc_nelmts parameter to be int_f. + * Changed type of the rdcc_w0 parameter to be real_f instead of double + * Changed type of the rdcc_nelmts parameter to be int_f. * EIP October 10, 2003 * SOURCE */ int_f -nh5pget_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes , real_f* rdcc_w0) +h5pget_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes , real_f* rdcc_w0) /******/ { int ret_value = -1; @@ -1479,29 +1377,29 @@ nh5pget_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_ /****if* H5Pf/h5pset_fapl_split_c * NAME - * h5pset_fapl_split_c + * h5pset_fapl_split_c * PURPOSE - * Call H5Pset_fapl_split to set he low-level driver to split meta data - * from raw data + * Call H5Pset_fapl_split to set he low-level driver to split meta data + * from raw data * INPUTS - * prp_id - property list identifier - * meta_len - Length of meta_ext - * meta_ext - Name of the extension for the metafile filename. - * meta_plist - Identifier of the meta file access property list - * raw_len - Length of raw _ext - * raw_ext - Name of the extension for the raw file filename. - * raw_plist - Identifier of the raw file access property list + * prp_id - property list identifier + * meta_len - Length of meta_ext + * meta_ext - Name of the extension for the metafile filename. + * meta_plist - Identifier of the meta file access property list + * raw_len - Length of raw _ext + * raw_ext - Name of the extension for the raw file filename. + * raw_plist - Identifier of the raw file access property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9, 2001 + * March 9, 2001 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_split_c(hid_t_f *prp_id, int_f* meta_len, _fcd meta_ext, hid_t_f* meta_plist, int_f* raw_len, _fcd raw_ext, hid_t_f * raw_plist) +h5pset_fapl_split_c(hid_t_f *prp_id, int_f* meta_len, _fcd meta_ext, hid_t_f* meta_plist, int_f* raw_len, _fcd raw_ext, hid_t_f * raw_plist) /******/ { int ret_value = -1; @@ -1540,32 +1438,32 @@ DONE: #ifdef NO_SUCH_F90_FUNCTION /****if* H5Pf/h5pget_fapl_split_c * NAME - * h5pget_fapl_split_c + * h5pget_fapl_split_c * PURPOSE - * Call H5Pget_fapl_split to determine whether the file access - * property list is set to the split driver + * Call H5Pget_fapl_split to determine whether the file access + * property list is set to the split driver * INPUTS - * prp_id - property list identifier - * meta_ext_size - Number of characters of the meta file extension - * to be copied to the meta_ext buffer - * raw_ext_size - Number of characters of the raw file extension - * to be copied to the raw_ext buffer + * prp_id - property list identifier + * meta_ext_size - Number of characters of the meta file extension + * to be copied to the meta_ext buffer + * raw_ext_size - Number of characters of the raw file extension + * to be copied to the raw_ext buffer *OUTPUT - * meta_ext - Name of the extension for the metafile filename. - * meta_plist - Identifier of the meta file access property list - * raw_ext - Name of the extension for the raw file filename. - * raw_plist - Identifier of the raw file access property list + * meta_ext - Name of the extension for the metafile filename. + * meta_plist - Identifier of the meta file access property list + * raw_ext - Name of the extension for the raw file filename. + * raw_plist - Identifier of the raw file access property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 9 , 2001 + * March 9 , 2001 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_split_c(hid_t_f *prp_id, size_t_f* meta_ext_size , _fcd meta_ext, hid_t_f* meta_plist, size_t_f* raw_ext_size, _fcd raw_ext, hid_t_f * raw_plist) +h5pget_fapl_split_c(hid_t_f *prp_id, size_t_f* meta_ext_size , _fcd meta_ext, hid_t_f* meta_plist, size_t_f* raw_ext_size, _fcd raw_ext, hid_t_f * raw_plist) /******/ { int ret_value = -1; @@ -1603,25 +1501,25 @@ nh5pget_fapl_split_c(hid_t_f *prp_id, size_t_f* meta_ext_size , _fcd meta_ext, h /****if* H5Pf/h5pset_gc_references_c * NAME - * h5pset_gc_references_c + * h5pset_gc_references_c * PURPOSE - * Call H5Pset_gc_references to set garbage - * collecting references flag + * Call H5Pset_gc_references to set garbage + * collecting references flag * INPUTS - * prp_id - property list identifier - * gc_reference - flag for garbage collecting references - * for the file + * prp_id - property list identifier + * gc_reference - flag for garbage collecting references + * for the file * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_gc_references_c (hid_t_f *prp_id, int_f* gc_references) +h5pset_gc_references_c (hid_t_f *prp_id, int_f* gc_references) /******/ { int ret_value = -1; @@ -1643,25 +1541,25 @@ nh5pset_gc_references_c (hid_t_f *prp_id, int_f* gc_references) /****if* H5Pf/h5pget_gc_references_c * NAME - * h5pget_gc_references_c + * h5pget_gc_references_c * PURPOSE - * Call H5Pget_gc_references to set garbage - * collecting references flag + * Call H5Pget_gc_references to set garbage + * collecting references flag * INPUTS - * prp_id - property list identifier - * Outputs gc_reference - flag for garbage collecting references - * for the file + * prp_id - property list identifier + * Outputs gc_reference - flag for garbage collecting references + * for the file * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_gc_references_c (hid_t_f *prp_id, int_f* gc_references) +h5pget_gc_references_c (hid_t_f *prp_id, int_f* gc_references) /******/ { int ret_value = -1; @@ -1681,24 +1579,24 @@ nh5pget_gc_references_c (hid_t_f *prp_id, int_f* gc_references) /****if* H5Pf/h5pset_layout_c * NAME - * h5pset_layout_c + * h5pset_layout_c * PURPOSE - * Call H5Pset_layout to the type of storage used - * store the raw data for a dataset + * Call H5Pset_layout to the type of storage used + * store the raw data for a dataset * INPUTS - * prp_id - property list identifier - * layout - Type of storage layout for raw data. + * prp_id - property list identifier + * layout - Type of storage layout for raw data. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_layout_c (hid_t_f *prp_id, int_f* layout) +h5pset_layout_c (hid_t_f *prp_id, int_f* layout) /******/ { int ret_value = -1; @@ -1719,25 +1617,25 @@ nh5pset_layout_c (hid_t_f *prp_id, int_f* layout) /****if* H5Pf/h5pget_layout_c * NAME - * h5pget_layout_c + * h5pget_layout_c * PURPOSE - * Call H5Pget_layout to the type of storage used - * store the raw data for a dataset + * Call H5Pget_layout to the type of storage used + * store the raw data for a dataset * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * layout - Type of storage layout for raw data. + * layout - Type of storage layout for raw data. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_layout_c (hid_t_f *prp_id, int_f* layout) +h5pget_layout_c (hid_t_f *prp_id, int_f* layout) /******/ { int ret_value = -1; @@ -1756,27 +1654,27 @@ nh5pget_layout_c (hid_t_f *prp_id, int_f* layout) /****if* H5Pf/h5pset_filter_c * NAME - * h5pset_filter_c + * h5pset_filter_c * PURPOSE - * Call H5Pset_filter to add a filter to the filter pipeline. + * Call H5Pset_filter to add a filter to the filter pipeline. * INPUTS - * prp_id - property list identifier - * filter - Filter to be added to the pipeline. - * flags - Bit vector specifying certain general - * properties of the filter. - * cd_nelmts - Number of elements in cd_values. - * cd_values - Auxiliary data for the filter. + * prp_id - property list identifier + * filter - Filter to be added to the pipeline. + * flags - Bit vector specifying certain general + * properties of the filter. + * cd_nelmts - Number of elements in cd_values. + * cd_values - Auxiliary data for the filter. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, February 23, 2000 + * Wednesday, February 23, 2000 * HISTORY * * SOURCE */ int_f -nh5pset_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ) +h5pset_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ) /******/ { int ret_value = -1; @@ -1824,7 +1722,7 @@ DONE: * SOURCE */ int_f -nh5pget_nfilters_c (hid_t_f *prp_id, int_f* nfilters) +h5pget_nfilters_c (hid_t_f *prp_id, int_f* nfilters) /******/ { int ret_value = -1; @@ -1844,30 +1742,30 @@ nh5pget_nfilters_c (hid_t_f *prp_id, int_f* nfilters) } /*---------------------------------------------------------------------------- - * Name: h5pget_filter_c - * Purpose: Call H5Pget_filter2 to get information about a filter - * in a pipeline - * Inputs: prp_id - property list identifier - * filter_number - Sequence number within the filter - * pipeline of the filter for which - * information is sought. - * namelen - Anticipated number of characters in name. - *Outputs: flags - Bit vector specifying certain general - * properties of the filter. - * cd_nelmts - Number of elements in cd_value - * cd_values - Auxiliary data for the filter. - * name - Name of the filter - * filter_id - filter identification number - * Returns: 0 on success, -1 on failure - * Programmer: Xiangyang Su - * Friday, February 25, 2000 - * Modifications: - * Since cd_nelmts has IN/OUT attributes, fixed the input and - * returned value of cd_nelmnts to satisfy this specification. + * Name: h5pget_filter_c + * Purpose: Call H5Pget_filter2 to get information about a filter + * in a pipeline + * Inputs: prp_id - property list identifier + * filter_number - Sequence number within the filter + * pipeline of the filter for which + * information is sought. + * namelen - Anticipated number of characters in name. + * Outputs: flags - Bit vector specifying certain general + * properties of the filter. + * cd_nelmts - Number of elements in cd_value + * cd_values - Auxiliary data for the filter. + * name - Name of the filter + * filter_id - filter identification number + * Returns: 0 on success, -1 on failure + * Programmer: Xiangyang Su + * Friday, February 25, 2000 + * Modifications: + * Since cd_nelmts has IN/OUT attributes, fixed the input and + * returned value of cd_nelmnts to satisfy this specification. * MSB January 27, 2009 *---------------------------------------------------------------------------*/ int_f -nh5pget_filter_c(hid_t_f *prp_id, int_f* filter_number, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name, int_f* filter_id) +h5pget_filter_c(hid_t_f *prp_id, int_f* filter_number, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name, int_f* filter_id) /******/ { unsigned int c_flags; @@ -1921,7 +1819,7 @@ DONE: * name - Name of an external file * namelen - length of name * offset - Offset, in bytes, from the beginning of the file - * to the location in the file where the data starts. + * to the location in the file where the data starts. * bytes - Number of bytes reserved in the file for the data. * RETURNS * 0 on success, -1 on failure @@ -1934,7 +1832,7 @@ DONE: * SOURCE */ int_f -nh5pset_external_c (hid_t_f *prp_id, _fcd name, int_f* namelen, off_t_f* offset, hsize_t_f*bytes) +h5pset_external_c (hid_t_f *prp_id, _fcd name, int_f* namelen, off_t_f* offset, hsize_t_f*bytes) /******/ { int ret_value = -1; @@ -1967,25 +1865,25 @@ DONE: /****if* H5Pf/h5pget_external_count_c * NAME - * h5pget_external_count_c + * h5pget_external_count_c * PURPOSE - * Call H5Pget_external_count to get the number of external - * files for the specified dataset. + * Call H5Pget_external_count to get the number of external + * files for the specified dataset. * INPUTS - * prp_id - property list identifier + * prp_id - property list identifier * OUTPUTS - * count - number of external files + * count - number of external files * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY * * SOURCE */ int_f -nh5pget_external_count_c (hid_t_f *prp_id, int_f* count) +h5pget_external_count_c (hid_t_f *prp_id, int_f* count) /******/ { int ret_value = -1; @@ -2008,14 +1906,14 @@ nh5pget_external_count_c (hid_t_f *prp_id, int_f* count) * PURPOSE * Call H5Pget_external to get nformation about an external file. * INPUTS - * prp_id - property list identifier - * name_size - length of name - * idx - External file index. + * prp_id - property list identifier + * name_size - length of name + * idx - External file index. * OUTPUT - * name - Name of an external file - * offset - Offset, in bytes, from the beginning of the file - * to the location in the file where the data starts. - * bytes - Number of bytes reserved in the file for the data. + * name - Name of an external file + * offset - Offset, in bytes, from the beginning of the file + * to the location in the file where the data starts. + * bytes - Number of bytes reserved in the file for the data. * RETURNS * on success, -1 on failure * AUTHOR @@ -2027,7 +1925,7 @@ nh5pget_external_count_c (hid_t_f *prp_id, int_f* count) * SOURCE */ int_f -nh5pget_external_c(hid_t_f *prp_id, int_f *idx, size_t_f* name_size, _fcd name, off_t_f* offset, hsize_t_f*bytes) +h5pget_external_c(hid_t_f *prp_id, int_f *idx, size_t_f* name_size, _fcd name, off_t_f* offset, hsize_t_f*bytes) /******/ { int ret_value = -1; @@ -2071,27 +1969,27 @@ DONE: /****if* H5Pf/h5pset_btree_ratios_c * NAME - * h5pset_btree_ratios_c + * h5pset_btree_ratios_c * PURPOSE - * Call H5Pset_btree_ratios to set B-tree split ratios for B-tree split ratios for a dataset transfer property list. a - * dataset transfer property list. + * Call H5Pset_btree_ratios to set B-tree split ratios for B-tree split ratios for a dataset transfer property list. a + * dataset transfer property list. * INPUTS - * prp_id - property list identifier - * left - The B-tree split ratio for left-most nodes. - * middle - The B-tree split ratio for all other nodes - * right - The B-tree split ratio for right-most nodes - * and lone nodes. + * prp_id - property list identifier + * left - The B-tree split ratio for left-most nodes. + * middle - The B-tree split ratio for all other nodes + * right - The B-tree split ratio for right-most nodes + * and lone nodes. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY - * Changed the type of the last three parameters from double to real_f + * Changed the type of the last three parameters from double to real_f * SOURCE */ int_f -nh5pset_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right) +h5pset_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right) /******/ { int ret_value = -1; @@ -2116,27 +2014,27 @@ nh5pset_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* ri /****if* H5Pf/h5pget_btree_ratios_c * NAME - * h5pget_btree_ratios_c + * h5pget_btree_ratios_c * PURPOSE - * Call H5Pget_btree_ratios to Gets B-tree split ratios - * for a dataset transfer property list. + * Call H5Pget_btree_ratios to Gets B-tree split ratios + * for a dataset transfer property list. * INPUTS - * prp_id - property list identifier - * left - The B-tree split ratio for left-most nodes. - * middle - The B-tree split ratio for all other nodes - * right - The B-tree split ratio for right-most nodes - * and lone nodes. + * prp_id - property list identifier + * left - The B-tree split ratio for left-most nodes. + * middle - The B-tree split ratio for all other nodes + * right - The B-tree split ratio for right-most nodes + * and lone nodes. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, February 25, 2000 + * Friday, February 25, 2000 * HISTORY - * Changed the type of the last three parameters from double to real_f + * Changed the type of the last three parameters from double to real_f * SOURCE */ int_f -nh5pget_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right) +h5pget_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right) /******/ { int ret_value = -1; @@ -2158,30 +2056,30 @@ nh5pget_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* ri } /****if* H5Pf/h5pget_fclose_degree_c * NAME - * h5pget_fclose_degree_c + * h5pget_fclose_degree_c * PURPOSE - * Call H5Pget_fclose_degree to determine file close behavior + * Call H5Pget_fclose_degree to determine file close behavior * INPUTS - * fapl_id - file access identifier + * fapl_id - file access identifier * OUTPUTS * - * degree - possible values are: + * degree - possible values are: * H5F_CLOSE_DEFAULT * H5F_CLOSE_WEAK * H5F_CLOSE_SEMI * H5F_CLOSE_STRONG * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, September 26, 2002 + * Thursday, September 26, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) +h5pget_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) /******/ { int ret_value = -1; @@ -2198,28 +2096,28 @@ nh5pget_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) /****if* H5Pf/h5pset_fclose_degree_c * NAME - * h5pset_fclose_degree_c + * h5pset_fclose_degree_c * PURPOSE - * Call H5Pset_fclose_degree to set file close behavior + * Call H5Pset_fclose_degree to set file close behavior * INPUTS - * fapl_id - file access identifier - * degree - possible values are: + * fapl_id - file access identifier + * degree - possible values are: * H5F_CLOSE_DEFAULT * H5F_CLOSE_WEAK * H5F_CLOSE_SEMI * H5F_CLOSE_STRONG * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, September 26, 2002 + * Thursday, September 26, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) +h5pset_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) /******/ { int ret_value = -1; @@ -2236,26 +2134,26 @@ nh5pset_fclose_degree_c ( hid_t_f *fapl_id , int_f *degree) /****if* H5Pf/h5pset_buffer_c * NAME - * h5pset_buffer_c + * h5pset_buffer_c * PURPOSE - * Call H5Pset_buffer to set size of conversion buffer + * Call H5Pset_buffer to set size of conversion buffer * INPUTS - * prp_id - t`dataset trasfer property list identifier - * size - size of the buffer + * prp_id - t`dataset trasfer property list identifier + * size - size of the buffer * OUTPUTS * NONE * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, October 2, 2002 + * Wednesday, October 2, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pset_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = 0; @@ -2270,25 +2168,25 @@ nh5pset_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) /****if* H5Pf/h5pget_buffer_c * NAME - * h5pget_buffer_c + * h5pget_buffer_c * PURPOSE - * Call H5Pget_buffer to get size of conversion buffer + * Call H5Pget_buffer to get size of conversion buffer * INPUTS - * prp_id - t`dataset trasfer property list identifier + * prp_id - t`dataset trasfer property list identifier * OUTPUTS - * size - size of conversion buffer + * size - size of conversion buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, October 2, 2002 + * Wednesday, October 2, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pget_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = -1; @@ -2304,25 +2202,25 @@ nh5pget_buffer_c ( hid_t_f *prp_id , hsize_t_f *size) } /****if* H5Pf/h5pfill_value_defined_c * NAME - * h5pfill_value_defined_c + * h5pfill_value_defined_c * PURPOSE - * Call H5Pfill_value_defined to check if fill value is defined + * Call H5Pfill_value_defined to check if fill value is defined * INPUTS - * prp_id - dataset creation property list identifier + * prp_id - dataset creation property list identifier * OUTPUTS - * flag - fill value status flag + * flag - fill value status flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, October 4, 2002 + * Friday, October 4, 2002 * HISTORY * * SOURCE */ int_f -nh5pfill_value_defined_c ( hid_t_f *prp_id , int_f *flag) +h5pfill_value_defined_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = -1; @@ -2337,26 +2235,26 @@ nh5pfill_value_defined_c ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pget_alloc_time_c * NAME - * h5pget_alloc_time_c + * h5pget_alloc_time_c * PURPOSE - * Call H5Pget_alloc_time to get space allocation - * time for dataset during creation + * Call H5Pget_alloc_time to get space allocation + * time for dataset during creation * INPUTS - * prp_id - dataset creation property list identifier + * prp_id - dataset creation property list identifier * OUTPUTS - * flag - allocation time flag + * flag - allocation time flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, October 4, 2002 + * Friday, October 4, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_alloc_time_c ( hid_t_f *prp_id , int_f *flag) +h5pget_alloc_time_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = -1; @@ -2371,25 +2269,25 @@ nh5pget_alloc_time_c ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pset_alloc_time_c * NAME - * h5pset_alloc_time_c + * h5pset_alloc_time_c * PURPOSE - * Call H5Pset_alloc_time to get space allocation - * time for dataset during creation + * Call H5Pset_alloc_time to get space allocation + * time for dataset during creation * INPUTS - * prp_id - dataset creation property list identifier - * flag - allocation time flag + * prp_id - dataset creation property list identifier + * flag - allocation time flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, October 4, 2002 + * Friday, October 4, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_alloc_time_c ( hid_t_f *prp_id , int_f *flag) +h5pset_alloc_time_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = -1; @@ -2404,26 +2302,26 @@ nh5pset_alloc_time_c ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pget_fill_time_c * NAME - * h5pget_fill_time_c + * h5pget_fill_time_c * PURPOSE - * Call H5Pget_fill_time to get fill value writing - * time for dataset during creation + * Call H5Pget_fill_time to get fill value writing + * time for dataset during creation * INPUTS - * prp_id - dataset creation property list identifier + * prp_id - dataset creation property list identifier * OUTPUTS - * flag - fill value writing time flag + * flag - fill value writing time flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, October 4, 2002 + * Friday, October 4, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_fill_time_c ( hid_t_f *prp_id , int_f *flag) +h5pget_fill_time_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = -1; @@ -2438,25 +2336,25 @@ nh5pget_fill_time_c ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pset_fill_time_c * NAME - * h5pset_fill_time_c + * h5pset_fill_time_c * PURPOSE - * Call H5Pset_fill_time to set fill value writing - * time for dataset during creation + * Call H5Pset_fill_time to set fill value writing + * time for dataset during creation * INPUTS - * prp_id - dataset creation property list identifier - * flag - fill value writing time flag + * prp_id - dataset creation property list identifier + * flag - fill value writing time flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Friday, October 4, 2002 + * Friday, October 4, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_fill_time_c ( hid_t_f *prp_id , int_f *flag) +h5pset_fill_time_c ( hid_t_f *prp_id , int_f *flag) /******/ { int ret_value = -1; @@ -2471,26 +2369,26 @@ nh5pset_fill_time_c ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pset_meta_block_size_c * NAME - * h5pset_meta_block_size_c + * h5pset_meta_block_size_c * PURPOSE - * Call H5Pset_meta_block_size to set size of metadata block + * Call H5Pset_meta_block_size to set size of metadata block * INPUTS - * prp_id - file access property list identifier - * size - size of the metadata block + * prp_id - file access property list identifier + * size - size of the metadata block * OUTPUTS * NONE * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pset_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = 0; @@ -2504,26 +2402,26 @@ nh5pset_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) } /****if* H5Pf/h5pget_meta_block_size_c * NAME - * h5pget_meta_block_size_c + * h5pget_meta_block_size_c * PURPOSE - * Call H5Pget_meta_block_size to get size of metadata block + * Call H5Pget_meta_block_size to get size of metadata block * INPUTS - * prp_id - file access property list identifier + * prp_id - file access property list identifier * OUTPUTS * - * size - size of the metadata block + * size - size of the metadata block * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pget_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = 0; @@ -2537,26 +2435,26 @@ nh5pget_meta_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) } /****if* H5Pf/h5pset_sieve_buf_size_c * NAME - * h5pset_sieve_buf_size_c + * h5pset_sieve_buf_size_c * PURPOSE - * Call H5Pset_sieve_buf_size to set size of datasieve buffer + * Call H5Pset_sieve_buf_size to set size of datasieve buffer * INPUTS - * prp_id - file access property list identifier - * size - size of the buffer + * prp_id - file access property list identifier + * size - size of the buffer * OUTPUTS * NONE * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) +h5pset_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) /******/ { int ret_value = 0; @@ -2570,26 +2468,26 @@ nh5pset_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) } /****if* H5Pf/h5pget_sieve_buf_size_c * NAME - * h5pget_sieve_buf_size_c + * h5pget_sieve_buf_size_c * PURPOSE - * Call H5Pget_sieve_buf_size to get size of datasieve buffer + * Call H5Pget_sieve_buf_size to get size of datasieve buffer * INPUTS - * prp_id - file access property list identifier + * prp_id - file access property list identifier * OUTPUTS * - * size - size of the buffer + * size - size of the buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) +h5pget_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) /******/ { int ret_value = 0; @@ -2603,26 +2501,26 @@ nh5pget_sieve_buf_size_c ( hid_t_f *prp_id , size_t_f *size) } /****if* H5Pf/h5pset_small_data_block_size_c * NAME - * h5pset_small_data_block_size_c + * h5pset_small_data_block_size_c * PURPOSE - * Call H5Pset_small_data_block_size to set size of raw small data block + * Call H5Pset_small_data_block_size to set size of raw small data block * INPUTS - * prp_id - file access property list identifier - * size - size of the block + * prp_id - file access property list identifier + * size - size of the block * OUTPUTS * NONE * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pset_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = 0; @@ -2636,26 +2534,26 @@ nh5pset_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) } /****if* H5Pf/h5pget_small_data_block_size_c * NAME - * h5pget_small_data_block_size_c + * h5pget_small_data_block_size_c * PURPOSE - * Call H5Pget_small_data_block_size to get size of raw small data block + * Call H5Pget_small_data_block_size to get size of raw small data block * INPUTS - * prp_id - file access property list identifier + * prp_id - file access property list identifier * OUTPUTS * - * size - size of the block + * size - size of the block * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) +h5pget_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) /******/ { int ret_value = 0; @@ -2669,26 +2567,26 @@ nh5pget_small_data_block_size_c ( hid_t_f *prp_id , hsize_t_f *size) } /****if* H5Pf/h5pset_hyper_vector_size_c * NAME - * h5pset_hyper_vector_size_c + * h5pset_hyper_vector_size_c * PURPOSE - * Call H5Pset_hyper_vector_size to set size of the hyper vector + * Call H5Pset_hyper_vector_size to set size of the hyper vector * INPUTS - * prp_id - dataset transfer property list identifier - * size - size of the vector + * prp_id - dataset transfer property list identifier + * size - size of the vector * OUTPUTS * NONE * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pset_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) +h5pset_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) /******/ { int ret_value = 0; @@ -2702,26 +2600,26 @@ nh5pset_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) } /****if* H5Pf/h5pget_hyper_vector_size_c * NAME - * h5pget_hyper_vector_size_c + * h5pget_hyper_vector_size_c * PURPOSE - * Call H5Pget_hyper_vector_size to get size of the hyper vector + * Call H5Pget_hyper_vector_size to get size of the hyper vector * INPUTS - * prp_id - dataset transfer property list identifier + * prp_id - dataset transfer property list identifier * OUTPUTS * - * size - size of the vector + * size - size of the vector * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) +h5pget_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) /******/ { int ret_value = 0; @@ -2733,36 +2631,6 @@ nh5pget_hyper_vector_size_c ( hid_t_f *prp_id , size_t_f *size) *size = (size_t_f)c_size; return ret_value; } -/****if* H5Pf/h5pcreate_class_c - * NAME - * h5pcreate_class_c - * PURPOSE - * Call H5Pcreate_class to create a new property class - * INPUTS - * parent - property list class identifier - * name - name of the new class - * name_len - lenght of the "name" buffer - * OUTPUTS - * cls - new class identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * October 11, 2002 - * - * HISTORY - * SOURCE -*/ -int_f -nh5pcreate_class_f90_c(hid_t_f *parent, _fcd name, int_f *name_len, hid_t_f *cls) -/******/ -{ - int ret_value = -1; - - ret_value = h5pcreate_class_c(parent, name, name_len, cls, NULL, NULL, NULL, NULL, NULL, NULL); - return ret_value; -} - /****if* H5Pf/h5pcreate_class_c * NAME @@ -2814,18 +2682,17 @@ DONE: return ret_value; } - -/****if* H5Pf/h5pregisterc_c +/****if* H5Pf/h5pregister_c * NAME - * h5pregisterc_c + * h5pregister_c * PURPOSE - * Call h5pregister_c to registers a permanent property + * Call H5Pregister2 to registers a permanent property * INPUTS * class - property list class identifier * name - name of the new property * name_len - length of the "name" buffer * size - property size - * value - property value of character type + * value - property value * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -2836,54 +2703,21 @@ DONE: * SOURCE */ int_f -nh5pregisterc_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, _fcd value, int_f H5_ATTR_UNUSED *value_len) +h5pregister_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, void H5_ATTR_UNUSED *value) /******/ { - int ret_value = -1; + char* c_name = NULL; + int_f ret_value = -1; + + if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*name_len))) + goto DONE; /* - * Call h5pregister_c function + * Call H5Pregister2 function. */ - ret_value = h5pregister_c(cls, name, name_len, size, _fcdtocp(value)); - return ret_value; -} - -/****if* H5Pf/h5pregister_c - * NAME - * h5pregister_c - * PURPOSE - * Call H5Pregister2 to registers a permanent property - * INPUTS - * class - property list class identifier - * name - name of the new property - * name_len - length of the "name" buffer - * size - property size - * value - property value - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * October 11, 2002 - * HISTORY - * - * SOURCE -*/ -int_f -h5pregister_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, void H5_ATTR_UNUSED *value) -/******/ -{ - char* c_name = NULL; - int_f ret_value = -1; - - if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*name_len))) - goto DONE; - - /* - * Call H5Pregister2 function. - */ - if(H5Pregister2((hid_t)*cls, c_name, (size_t)*size, value, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0) - goto DONE; - ret_value = 0; + if(H5Pregister2((hid_t)*cls, c_name, (size_t)*size, value, NULL, NULL, NULL, NULL, NULL, NULL, NULL) < 0) + goto DONE; + ret_value = 0; DONE: if(c_name != NULL) @@ -2891,66 +2725,6 @@ DONE: return ret_value; } -int_f -nh5pregister_integer_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pregister_c function - */ - return h5pregister_c(cls, name, name_len, size, value); -} - -int_f -nh5pregister_real_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pregister_c function - */ - return h5pregister_c(cls, name, name_len, size, value); -} - -int_f -nh5pregister_double_c(hid_t_f *cls, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pregister_c function - */ - return h5pregister_c(cls, name, name_len, size, value); -} - -/****if* H5Pf/h5pinsertc_c - * NAME - * h5pinsertc_c - * PURPOSE - * Call h5pinsert_c to register a temporary property - * INPUTS - * plist - property list identifier - * name - name of the new property - * name_len - length of the "name" buffer - * size - property size - * value - property value of character type - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * October 11, 2002 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pinsertc_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, _fcd value, int_f H5_ATTR_UNUSED *value_len) -/******/ -{ - int_f ret_value = -1; - - /* - * Call h5pinsert_c function - */ - ret_value = h5pinsert_c(plist, name, name_len, size, _fcdtocp(value)); - return ret_value; -} - /****if* H5Pf/h5pinsert_c * NAME * h5pinsert_c @@ -2994,54 +2768,27 @@ DONE: return ret_value; } -int_f -nh5pinsert_integer_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pinsert_c function - */ - return h5pinsert_c(plist, name, name_len, size, value); -} - -int_f -nh5pinsert_real_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pinsert_c function - */ - return h5pinsert_c(plist, name, name_len, size, value); -} - -int_f -nh5pinsert_double_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value) -{ - /* - * Call h5pinsert_c function - */ - return h5pinsert_c(plist, name, name_len, size, value); -} - /****if* H5Pf/h5pexist_c * NAME - * h5pexist_c + * h5pexist_c * PURPOSE - * Call H5Pexist to querie whether a property name exists - * in a property list or class + * Call H5Pexist to querie whether a property name exists + * in a property list or class * INPUTS - * plist - property list or property class identifier - * name - name of the new property - * name_len - length of the "name" buffer + * plist - property list or property class identifier + * name - name of the new property + * name_len - length of the "name" buffer * RETURNS - * nonnegative on success, -1 on failure + * nonnegative on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pexist_c(hid_t_f *cls, _fcd name, int_f *name_len) +h5pexist_c(hid_t_f *cls, _fcd name, int_f *name_len) /******/ { int_f ret_value = -1; @@ -3065,24 +2812,24 @@ DONE: } /****if* H5Pf/h5pisa_class_c * NAME - * h5pisa_class_c + * h5pisa_class_c * PURPOSE - * Call H5Pisa_class to querie whether a property is a - * member of a class + * Call H5Pisa_class to querie whether a property is a + * member of a class * INPUTS - * plist - property list identifier - * cls - property class identifier + * plist - property list identifier + * cls - property class identifier * RETURNS - * nonnegative on success, -1 on failure + * nonnegative on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pisa_class_c(hid_t_f *plist, hid_t_f *cls) +h5pisa_class_c(hid_t_f *plist, hid_t_f *cls) /******/ { int_f ret_value = -1; @@ -3102,26 +2849,26 @@ nh5pisa_class_c(hid_t_f *plist, hid_t_f *cls) } /****if* H5Pf/h5pget_size_c * NAME - * h5pget_size_c + * h5pget_size_c * PURPOSE - * Call H5Pget_size to querie the size of the property + * Call H5Pget_size to querie the size of the property * INPUTS - * plist - property list to query - * name - name of the property - * name_len - length of the "name" buffer + * plist - property list to query + * name - name of the property + * name_len - length of the "name" buffer * OUTPUTS - * size - size of the property in bytes + * size - size of the property in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_size_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size) +h5pget_size_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size) /******/ { int_f ret_value = -1; @@ -3146,24 +2893,24 @@ DONE: } /****if* H5Pf/h5pget_nprops_c * NAME - * h5pget_nprops_c + * h5pget_nprops_c * PURPOSE - * Call H5Pget_nporps to get number of the properties in the list + * Call H5Pget_nporps to get number of the properties in the list * INPUTS - * plist - property list to query + * plist - property list to query * OUTPUTS - * nprops - number of properties in the list + * nprops - number of properties in the list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_nprops_c(hid_t_f *plist, size_t_f *nprops) +h5pget_nprops_c(hid_t_f *plist, size_t_f *nprops) /******/ { int_f ret_value = -1; @@ -3183,25 +2930,25 @@ nh5pget_nprops_c(hid_t_f *plist, size_t_f *nprops) } /****if* H5Pf/h5pget_class_parent_c * NAME - * h5pget_class_parent_c + * h5pget_class_parent_c * PURPOSE - * Call H5Pget_class_parent to get the parent class of - * a genereic property class + * Call H5Pget_class_parent to get the parent class of + * a genereic property class * INPUTS - * prp_id - property list to query + * prp_id - property list to query * OUTPUTS - * parent_id - parent classs identifier + * parent_id - parent classs identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pget_class_parent_c(hid_t_f *prp_id, hid_t_f *parent_id) +h5pget_class_parent_c(hid_t_f *prp_id, hid_t_f *parent_id) /******/ { int_f ret_value = -1; @@ -3222,26 +2969,26 @@ nh5pget_class_parent_c(hid_t_f *prp_id, hid_t_f *parent_id) } /****if* H5Pf/h5pcopy_prop_c * NAME - * h5pcopy_prop_c + * h5pcopy_prop_c * PURPOSE - * Call H5Pcopy_prop to copy a property from one list or - * class to another + * Call H5Pcopy_prop to copy a property from one list or + * class to another * INPUTS - * dst_id - identifier of destination property list - * src_id - identifier of source property list - * name - name of the property - * name_len - length of the "name" buffer + * dst_id - identifier of destination property list + * src_id - identifier of source property list + * name - name of the property + * name_len - length of the "name" buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5pcopy_prop_c(hid_t_f *dst_id, hid_t_f *src_id, _fcd name, int_f *name_len) +h5pcopy_prop_c(hid_t_f *dst_id, hid_t_f *src_id, _fcd name, int_f *name_len) /******/ { int_f ret_value = -1; @@ -3265,24 +3012,24 @@ DONE: } /****if* H5Pf/h5premove_c * NAME - * h5premove_c + * h5premove_c * PURPOSE - * Call H5Premove to remove a property from a list + * Call H5Premove to remove a property from a list * INPUTS - * plid - identifier of property list - * name - name of the property to remove - * name_len - length of the "name" buffer + * plid - identifier of property list + * name - name of the property to remove + * name_len - length of the "name" buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * October 11, 2002 + * October 11, 2002 * HISTORY * * SOURCE */ int_f -nh5premove_c(hid_t_f *plid, _fcd name, int_f *name_len) +h5premove_c(hid_t_f *plid, _fcd name, int_f *name_len) /******/ { int_f ret_value = -1; @@ -3305,15 +3052,15 @@ DONE: } /****if* H5Pf/h5punregister_c * NAME - * h5punregister_c + * h5punregister_c * PURPOSE - * Call H5Punregister to remove a property from a property class + * Call H5Punregister to remove a property from a property class * INPUTS - * cls - identifier of property class - * name - name of the property to unregister - * name_len - length of the "name" buffer + * cls - identifier of property class + * name - name of the property to unregister + * name_len - length of the "name" buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * October 11, 2002 @@ -3322,7 +3069,7 @@ DONE: * SOURCE */ int_f -nh5punregister_c(hid_t_f *cls, _fcd name, int_f *name_len) +h5punregister_c(hid_t_f *cls, _fcd name, int_f *name_len) /******/ { int_f ret_value = -1; @@ -3345,13 +3092,13 @@ DONE: } /****if* H5Pf/h5pclose_class_c * NAME - * h5pclose_class_c + * h5pclose_class_c * PURPOSE - * Call H5Pclose_class to close property class + * Call H5Pclose_class to close property class * INPUTS - * class - identifier of property class to close + * class - identifier of property class to close * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * October 11, 2002 @@ -3360,7 +3107,7 @@ DONE: * SOURCE */ int_f -nh5pclose_class_c(hid_t_f *cls) +h5pclose_class_c(hid_t_f *cls) /******/ { int_f ret_value = -1; @@ -3377,15 +3124,15 @@ nh5pclose_class_c(hid_t_f *cls) /****if* H5Pf/h5pget_class_name_c * NAME - * h5pget_class_name_c + * h5pget_class_name_c * PURPOSE - * Call H5Pget_class_name to get property class name + * Call H5Pget_class_name to get property class name * INPUTS - * cls - identifier of property class - * name - buffer to retrieve name in - * name_len - length of the "name" buffer + * cls - identifier of property class + * name - buffer to retrieve name in + * name_len - length of the "name" buffer * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * October 11, 2002 @@ -3394,7 +3141,7 @@ nh5pclose_class_c(hid_t_f *cls) * SOURCE */ int_f -nh5pget_class_name_c(hid_t_f *cls, _fcd name, int_f *name_len) +h5pget_class_name_c(hid_t_f *cls, _fcd name, int_f *name_len) /******/ { int_f ret_value = -1; @@ -3417,38 +3164,6 @@ DONE: return ret_value; } -/****if* H5Pf/h5psetc_c - * NAME - * h5psetc_c - * PURPOSE - * Call h5setc_c to set property with the character string value - * INPUTS - * plist - property list identifier - * name - name of property - * name_len - length of the "name" buffer - * value - property value of character type - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * October 11, 2002 - * HISTORY - * - * SOURCE -*/ -int_f -nh5psetc_c(hid_t_f *plist, _fcd name, int_f *name_len, _fcd value, int_f H5_ATTR_UNUSED *value_len) -/******/ -{ - int_f ret_value = -1; - - /* - * Call h5pset_c function - */ - ret_value = h5pset_c(plist, name, name_len, _fcdtocp(value)); - return ret_value; -} - /****if* H5Pf/h5pset_c * NAME * h5pset_c @@ -3489,64 +3204,6 @@ DONE: return ret_value; } -int_f -nh5pset_integer_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pset_c function - */ - return h5pset_c(plist, name, name_len, value); -} - -int_f -nh5pset_real_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pset_c function - */ - return h5pset_c(plist, name, name_len, value); -} - -int_f -nh5pset_double_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pset_c function - */ - return h5pset_c(plist, name, name_len, value); -} -/****if* H5Pf/h5pgetc_c - * NAME - * h5pgetc_c - * PURPOSE - * Call h5set_c to set property with the character string value - * INPUTS - * plist - property list identifier - * name - name of property - * name_len - length of the "name" buffer - * Output: value - property value of character type - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * October 11, 2002 - * HISTORY - * - * SOURCE -*/ -int_f -nh5pgetc_c(hid_t_f *plist, _fcd name, int_f *name_len, _fcd value, int_f H5_ATTR_UNUSED *value_len) -/******/ -{ - int_f ret_value = -1; - - /* - * Call h5pget_c function - */ - ret_value = h5pget_c(plist, name, name_len, _fcdtocp(value)); - return ret_value; -} - /****if* H5Pf/h5pget_c * NAME * h5pget_c @@ -3556,7 +3213,7 @@ nh5pgetc_c(hid_t_f *plist, _fcd name, int_f *name_len, _fcd value, int_f H5_ATTR * plist - property list class identifier * name - name of the new property * name_len - length of the "name" buffer - * Output: + * Output: * value - property value * RETURNS * 0 on success, -1 on failure @@ -3588,54 +3245,26 @@ DONE: return ret_value; } -int_f -nh5pget_integer_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pget_c function - */ - return h5pget_c(plist, name, name_len, value); -} - -int_f -nh5pget_real_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pget_c function - */ - return h5pget_c(plist, name, name_len, value); -} - -int_f -nh5pget_double_c(hid_t_f *plist, _fcd name, int_f *name_len, void *value) -{ - /* - * Call h5pget_c function - */ - return h5pget_c(plist, name, name_len, value); -} - - /****if* H5Pf/h5pset_shuffle_c * NAME - * h5pset_shuffle_c + * h5pset_shuffle_c * PURPOSE - * Call H5Pset_shuffle + * Call H5Pset_shuffle * INPUTS - * prp_id - property list identifier - * type_size - size of the datatype in bytes + * prp_id - property list identifier + * type_size - size of the datatype in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12, 2003 + * Wednesday, March 12, 2003 * HISTORY * * SOURCE */ int_f -nh5pset_shuffle_c ( hid_t_f *prp_id ) +h5pset_shuffle_c ( hid_t_f *prp_id ) /******/ { int_f ret_value = 0; @@ -3649,23 +3278,23 @@ nh5pset_shuffle_c ( hid_t_f *prp_id ) } /****if* H5Pf/h5pset_fletcher32_c * NAME - * h5pset_fletcher32_c + * h5pset_fletcher32_c * PURPOSE - * Call H5Pset_fletcher32 to enable EDC + * Call H5Pset_fletcher32 to enable EDC * INPUTS - * prp_id - dataset creation property list identifier + * prp_id - dataset creation property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, March 13, 2003 + * Thursday, March 13, 2003 * HISTORY * * SOURCE */ int_f -nh5pset_fletcher32_c ( hid_t_f *prp_id ) +h5pset_fletcher32_c ( hid_t_f *prp_id ) /******/ { int_f ret_value = 0; @@ -3680,24 +3309,24 @@ nh5pset_fletcher32_c ( hid_t_f *prp_id ) /****if* H5Pf/h5pset_edc_check_c * NAME - * h5pset_edc_check_c + * h5pset_edc_check_c * PURPOSE - * Call H5Pset_edc_check to enable EDC + * Call H5Pset_edc_check to enable EDC * INPUTS - * prp_id - dataset transfer property list identifier - * flag - EDC flag + * prp_id - dataset transfer property list identifier + * flag - EDC flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, March 13, 2003 + * Thursday, March 13, 2003 * HISTORY * * SOURCE */ int_f -nh5pset_edc_check_c ( hid_t_f *prp_id, int_f *flag ) +h5pset_edc_check_c ( hid_t_f *prp_id, int_f *flag ) /******/ { int_f ret_value = 0; @@ -3714,24 +3343,24 @@ nh5pset_edc_check_c ( hid_t_f *prp_id, int_f *flag ) /****if* H5Pf/h5pget_edc_check_c * NAME - * h5pget_edc_check_c + * h5pget_edc_check_c * PURPOSE - * Call H5Pget_edc_check to query EDC + * Call H5Pget_edc_check to query EDC * INPUTS - * prp_id - dataset transfer property list identifier - * Outouts: flag - EDC flag + * prp_id - dataset transfer property list identifier + * Outouts: flag - EDC flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, March 13, 2003 + * Thursday, March 13, 2003 * HISTORY * * SOURCE */ int_f -nh5pget_edc_check_c ( hid_t_f *prp_id, int_f *flag ) +h5pget_edc_check_c ( hid_t_f *prp_id, int_f *flag ) /******/ { int_f ret_value = 0; @@ -3746,24 +3375,24 @@ nh5pget_edc_check_c ( hid_t_f *prp_id, int_f *flag ) } /****if* H5Pf/h5pset_family_offset_c * NAME - * h5pset_family_offset_c + * h5pset_family_offset_c * PURPOSE - * Call H5Pset_family_offset to set and offset for family driver + * Call H5Pset_family_offset to set and offset for family driver * INPUTS - * prp_id - property list identifier - * offset - offset in bytes + * prp_id - property list identifier + * offset - offset in bytes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, 19 March 2003 + * Wednesday, 19 March 2003 * HISTORY * * SOURCE */ int_f -nh5pset_family_offset_c ( hid_t_f *prp_id , hsize_t_f *offset) +h5pset_family_offset_c ( hid_t_f *prp_id , hsize_t_f *offset) /******/ { int_f ret_value = 0; @@ -3780,30 +3409,30 @@ nh5pset_family_offset_c ( hid_t_f *prp_id , hsize_t_f *offset) /****if* H5Pf/h5pset_fapl_multi_c * NAME - * h5pset_fapl_multi_c + * h5pset_fapl_multi_c * PURPOSE - * Call H5Pset_fapl_multi to set multi file dirver + * Call H5Pset_fapl_multi to set multi file dirver * INPUTS - * prp_id - file_creation property list identifier - * mem_map - memory mapping array - * memb_fapl - property list for each memory usage type - * memb_name - array with members names - * len - array with the lenght of each name - * lenmax - lenght of the name a sdeclared in Fortran - * flag - flag allowing partila access when one of the files is missing + * prp_id - file_creation property list identifier + * mem_map - memory mapping array + * memb_fapl - property list for each memory usage type + * memb_name - array with members names + * len - array with the lenght of each name + * lenmax - lenght of the name a sdeclared in Fortran + * flag - flag allowing partila access when one of the files is missing * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday 24, March 2003 + * Monday 24, March 2003 * HISTORY * * SOURCE */ int_f -/*nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, haddr_t_f *memb_addr, int_f *flag) */ -nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag) +/*h5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, haddr_t_f *memb_addr, int_f *flag) */ +h5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag) /******/ { int_f ret_value = -1; @@ -3821,13 +3450,13 @@ nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _f c_lenmax = (int)*lenmax; relax = (hbool_t)*flag; /* - * Check that we got correct values from Fortran for memb_addr array + * Check that we got correct values from Fortran for memb_addr array */ for (i=0; i < H5FD_MEM_NTYPES; i++) { if(memb_addr[i] >= 1.0f) return ret_value; } /* - * Take care of names array + * Take care of names array */ tmp = (char *)HD5f2cstring(memb_name, (size_t)c_lenmax*(H5FD_MEM_NTYPES)); @@ -3841,7 +3470,7 @@ nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _f tmp_p = tmp_p + c_lenmax; } /* - * Take care of othe arguments + * Take care of othe arguments */ tmp_max_addr = (long double)(HADDR_MAX); c_prp_id = (hid_t)*prp_id; @@ -3852,7 +3481,7 @@ nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _f else c_memb_addr[i] = (haddr_t)(((float)memb_addr[i])*(tmp_max_addr)); } /* - * Call H5Pset_fapl_multi function + * Call H5Pset_fapl_multi function */ status = H5Pset_fapl_multi(c_prp_id, c_memb_map, c_memb_fapl, (const char * const *)c_memb_name, c_memb_addr, relax); @@ -3868,23 +3497,23 @@ DONE: /****if* H5Pf/h5pset_fapl_multi_sc * NAME - * h5pset_fapl_multi_sc + * h5pset_fapl_multi_sc * PURPOSE - * Call H5Pset_fapl_multi to set multi file dirver + * Call H5Pset_fapl_multi to set multi file dirver * INPUTS - * prp_id - file_creation property list identifier + * prp_id - file_creation property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * March 31 2003 + * March 31 2003 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag) +h5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag) /******/ { int_f ret_value = -1; @@ -3895,7 +3524,7 @@ nh5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag) relax = (hbool_t)*flag; c_prp_id = (hid_t)*prp_id; /* - * Call H5Pset_fapl_multi function + * Call H5Pset_fapl_multi function */ status = H5Pset_fapl_multi(c_prp_id, NULL, NULL, NULL, NULL, relax); @@ -3905,30 +3534,30 @@ nh5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag) } /****if* H5Pf/h5pget_fapl_multi_c * NAME - * h5pget_fapl_multi_c + * h5pget_fapl_multi_c * PURPOSE - * Call H5Pget_fapl_multi to set multi file dirver + * Call H5Pget_fapl_multi to set multi file dirver * INPUTS - * prp_id - file_creation property list identifier - * lenmax - lenght of the name a sdeclared in Fortran + * prp_id - file_creation property list identifier + * lenmax - lenght of the name a sdeclared in Fortran * OUTPUTS - * memb_map - memory mapping array - * memb_fapl - property list for each memory usage type - * memb_name - array with members names - * len - array with the lenght of each name - * flag - flag allowing partila access when one of the files is missing + * memb_map - memory mapping array + * memb_fapl - property list for each memory usage type + * memb_name - array with members names + * len - array with the lenght of each name + * flag - flag allowing partila access when one of the files is missing * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday 24, March 2003 + * Monday 24, March 2003 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag, int_f *maxlen_out) +h5pget_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag, int_f *maxlen_out) /******/ { int_f ret_value = -1; @@ -3947,14 +3576,14 @@ nh5pget_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _f c_prp_id = (hid_t)*prp_id; /* - * Call H5Pget_fapl_multi function + * Call H5Pget_fapl_multi function */ status = H5Pget_fapl_multi(c_prp_id, c_memb_map, c_memb_fapl, c_memb_name, c_memb_addr, &relax); if ( status < 0 ) return ret_value; /* - * Take care of names array + * Take care of names array */ tmp = (char *)HDmalloc(c_lenmax*H5FD_MEM_NTYPES + 1); tmp_p = tmp; @@ -3969,7 +3598,7 @@ nh5pget_fapl_multi_c ( hid_t_f *prp_id , int_f *memb_map, hid_t_f *memb_fapl, _f HD5packFstring(tmp, _fcdtocp(memb_name), (size_t)(c_lenmax*H5FD_MEM_NTYPES)); /* - * Take care of other arguments + * Take care of other arguments */ for (i=0; i < H5FD_MEM_NTYPES; i++) { @@ -3989,25 +3618,25 @@ HD5packFstring(tmp, _fcdtocp(memb_name), (size_t)(c_lenmax*H5FD_MEM_NTYPES)); /****if* H5Pf/h5pset_szip_c * NAME - * h5pset_szip_c + * h5pset_szip_c * PURPOSE - * Call H5Pset_szip to set szip compression + * Call H5Pset_szip to set szip compression * INPUTS - * prp_id - dataset creation property list identifier - * options_mask - * pixels_per_block -szip compression parameters + * prp_id - dataset creation property list identifier + * options_mask + * pixels_per_block -szip compression parameters * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * April 8 2003 + * April 8 2003 * HISTORY * * SOURCE */ int_f -nh5pset_szip_c ( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block) +h5pset_szip_c ( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block) /******/ { int_f ret_value = -1; @@ -4020,7 +3649,7 @@ nh5pset_szip_c ( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block) c_options_mask = (unsigned)*options_mask; c_pixels_per_block = (unsigned)*pixels_per_block; /* - * Call H5Pset_szip function + * Call H5Pset_szip function */ status = H5Pset_szip(c_prp_id, c_options_mask, c_pixels_per_block); @@ -4030,25 +3659,25 @@ nh5pset_szip_c ( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block) } /****if* H5Pf/h5pall_filters_avail_c * NAME - * h5pall_filters_avail_c + * h5pall_filters_avail_c * PURPOSE - * Call H5Pall_filters_avail + * Call H5Pall_filters_avail * INPUTS - * prp_id - dataset creation property list identifier + * prp_id - dataset creation property list identifier * OUTPUTS - * status - logical flag + * status - logical flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * April 10 2003 + * April 10 2003 * HISTORY * * SOURCE */ int_f -nh5pall_filters_avail_c ( hid_t_f *prp_id , int_f *status) +h5pall_filters_avail_c ( hid_t_f *prp_id , int_f *status) /******/ { int_f ret_value = -1; @@ -4058,7 +3687,7 @@ nh5pall_filters_avail_c ( hid_t_f *prp_id , int_f *status) c_prp_id = (hid_t)*prp_id; /* - * Call H5Pall_filters_avail function + * Call H5Pall_filters_avail function */ c_status = H5Pall_filters_avail(c_prp_id); @@ -4071,31 +3700,31 @@ nh5pall_filters_avail_c ( hid_t_f *prp_id , int_f *status) /****if* H5Pf/h5pget_filter_by_id_c * NAME - * h5pget_filter_by_id_c + * h5pget_filter_by_id_c * PURPOSE - * Call H5Pget_filter_by_id2 to get information about a filter - * in a pipeline + * Call H5Pget_filter_by_id2 to get information about a filter + * in a pipeline * INPUTS - * prp_id - property list identifier - * filter_id - filter id - * namelen - Anticipated number of characters in name. + * prp_id - property list identifier + * filter_id - filter id + * namelen - Anticipated number of characters in name. *OUTPUT - * flags - Bit vector specifying certain general - * properties of the filter. - * cd_nelmts - Number of elements in cd_value - * cd_values - Auxiliary data for the filter. - * name - Name of the filter + * flags - Bit vector specifying certain general + * properties of the filter. + * cd_nelmts - Number of elements in cd_value + * cd_values - Auxiliary data for the filter. + * name - Name of the filter * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena POurmal - * April 10, 2003 + * April 10, 2003 * HISTORY * * SOURCE */ int_f -nh5pget_filter_by_id_c(hid_t_f *prp_id, int_f* filter_id, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name) +h5pget_filter_by_id_c(hid_t_f *prp_id, int_f* filter_id, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name) /******/ { unsigned int c_flags; @@ -4138,27 +3767,27 @@ DONE: /****if* H5Pf/h5pmodify_filter_c * NAME - * h5pmodify_filter_c + * h5pmodify_filter_c * PURPOSE - * Call H5Pmodify_filter to modify a filter + * Call H5Pmodify_filter to modify a filter * INPUTS - * prp_id - property list identifier - * filter - Filter to be modified - * flags - Bit vector specifying certain general - * properties of the filter. - * cd_nelmts - Number of elements in cd_values. - * cd_values - Auxiliary data for the filter. + * prp_id - property list identifier + * filter - Filter to be modified + * flags - Bit vector specifying certain general + * properties of the filter. + * cd_nelmts - Number of elements in cd_values. + * cd_values - Auxiliary data for the filter. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * April 10 2003 + * April 10 2003 * HISTORY * * SOURCE */ int_f -nh5pmodify_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ) +h5pmodify_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ) /******/ { int_f ret_value = -1; @@ -4190,23 +3819,23 @@ DONE: /****if* H5Pf/h5premove_filter_c * NAME - * h5premove_filter_c + * h5premove_filter_c * PURPOSE - * Call H5Premove_filter to delete one or more filters + * Call H5Premove_filter to delete one or more filters * INPUTS - * prp_id - property list identifier - * filter - Filter to be deleted + * prp_id - property list identifier + * filter - Filter to be deleted * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Quincey Koziol - * January 27 2004 + * January 27 2004 * HISTORY * * SOURCE */ int_f -nh5premove_filter_c (hid_t_f *prp_id, int_f* filter) +h5premove_filter_c (hid_t_f *prp_id, int_f* filter) /******/ { int_f ret_value = -1; @@ -4228,25 +3857,25 @@ DONE: /****if* H5Pf/h5pget_attr_phase_change_c * NAME - * h5pget_attr_phase_change_c + * h5pget_attr_phase_change_c * PURPOSE - * Calls H5Pget_attr_phase_change + * Calls H5Pget_attr_phase_change * * INPUTS - * ocpl_id - Object (dataset or group) creation property list identifier - * Outputs max_compact - Maximum number of attributes to be stored in compact storage - * min_dense - Minimum number of attributes to be stored in dense storage + * ocpl_id - Object (dataset or group) creation property list identifier + * Outputs max_compact - Maximum number of attributes to be stored in compact storage + * min_dense - Minimum number of attributes to be stored in dense storage * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ) +h5pget_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ) /******/ { int ret_value = -1; @@ -4269,24 +3898,24 @@ nh5pget_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_den /****if* H5Pf/h5pset_attr_creation_order_c * NAME - * h5pset_attr_creation_order_c + * h5pset_attr_creation_order_c * PURPOSE - * Calls H5Ppset_attr_creation_order + * Calls H5Ppset_attr_creation_order * * INPUTS - * ocpl_id - Object (dataset or group) creation property list identifier - * Outputs crt_order_flags - Flags specifying whether to track and index attribute creation order + * ocpl_id - Object (dataset or group) creation property list identifier + * Outputs crt_order_flags - Flags specifying whether to track and index attribute creation order * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags ) +h5pset_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags ) /******/ { int ret_value = -1; @@ -4306,29 +3935,29 @@ nh5pset_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags ) /****if* H5Pf/h5pset_shared_mesg_nindexes_c * NAME - * h5pset_shared_mesg_nindexes_c + * h5pset_shared_mesg_nindexes_c * PURPOSE - * Calls h5pset_shared_mesg_nindexes + * Calls h5pset_shared_mesg_nindexes * * INPUTS * - * plist_id - file creation property list - * nindexes - Number of shared object header message indexes - * available in files created WITH this property list + * plist_id - file creation property list + * nindexes - Number of shared object header message indexes + * available in files created WITH this property list * * OUTPUTS * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_shared_mesg_nindexes_c(hid_t_f *plist_id, int_f *nindexes ) +h5pset_shared_mesg_nindexes_c(hid_t_f *plist_id, int_f *nindexes ) /******/ { int ret_value = -1; @@ -4349,30 +3978,30 @@ nh5pset_shared_mesg_nindexes_c(hid_t_f *plist_id, int_f *nindexes ) /****if* H5Pf/h5pset_shared_mesg_index_c * NAME - * h5pset_shared_mesg_index_c + * h5pset_shared_mesg_index_c * PURPOSE - * Calls H5Pset_shared_mesg_index + * Calls H5Pset_shared_mesg_index * * INPUTS * - * fcpl_id - File creation property list identifier. - * index_num - Index being configured. - * mesg_type_flags - Types of messages that should be stored in this index. - * min_mesg_size - Minimum message size. + * fcpl_id - File creation property list identifier. + * index_num - Index being configured. + * mesg_type_flags - Types of messages that should be stored in this index. + * min_mesg_size - Minimum message size. * * OUTPUTS * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * January, 2008 + * January, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_shared_mesg_index_c(hid_t_f *fcpl_id, int_f *index_num, int_f *mesg_type_flags, int_f *min_mesg_size) +h5pset_shared_mesg_index_c(hid_t_f *fcpl_id, int_f *index_num, int_f *mesg_type_flags, int_f *min_mesg_size) /******/ { int ret_value = -1; @@ -4389,28 +4018,28 @@ nh5pset_shared_mesg_index_c(hid_t_f *fcpl_id, int_f *index_num, int_f *mesg_type /****if* H5Pf/h5pget_attr_creation_order_c * NAME - * h5pget_attr_creation_order_c + * h5pget_attr_creation_order_c * PURPOSE - * Calls H5Pget_attr_creation_order + * Calls H5Pget_attr_creation_order * * INPUTS * - * ocpl_id - Object (group or dataset) creation property list identifier + * ocpl_id - Object (group or dataset) creation property list identifier * OUTPUTS * - * crt_order_flags - Flags specifying whether to track and index attribute creation order + * crt_order_flags - Flags specifying whether to track and index attribute creation order * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February, 2008 + * February, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags) +h5pget_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags) /******/ { int ret_value = -1; @@ -4431,29 +4060,29 @@ nh5pget_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags) } /****if* H5Pf/h5pset_libver_bounds_c * NAME - * h5pset_libver_bounds_c + * h5pset_libver_bounds_c * PURPOSE - * Calls H5Pset_libver_bounds + * Calls H5Pset_libver_bounds * * INPUTS * - * fapl_id - File access property list identifier - * low - The earliest version of the library that will be used for writing objects. - * high - The latest version of the library that will be used for writing objects. + * fapl_id - File access property list identifier + * low - The earliest version of the library that will be used for writing objects. + * high - The latest version of the library that will be used for writing objects. * OUTPUTS * * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 18, 2008 + * February 18, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_libver_bounds_c(hid_t_f *fapl_id, int_f *low, int_f *high ) +h5pset_libver_bounds_c(hid_t_f *fapl_id, int_f *low, int_f *high ) /******/ { int ret_value = -1; @@ -4471,26 +4100,26 @@ nh5pset_libver_bounds_c(hid_t_f *fapl_id, int_f *low, int_f *high ) /****if* H5Pf/h5pset_link_creation_order_c * NAME - * h5pset_link_creation_order_c + * h5pset_link_creation_order_c * PURPOSE - * Calls H5Pset_link_creation_order + * Calls H5Pset_link_creation_order * * INPUTS - * gcpl_id - Group creation property list identifier - * crt_order_flags - Creation order flag(s) + * gcpl_id - Group creation property list identifier + * crt_order_flags - Creation order flag(s) * OUTPUTS * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 18, 2008 + * February 18, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags ) +h5pset_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags ) /******/ { int ret_value = -1; @@ -4507,25 +4136,25 @@ nh5pset_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags ) /****if* H5Pf/h5pget_link_phase_change_c * NAME - * h5pget_link_phase_change_c + * h5pget_link_phase_change_c * PURPOSE - * Calls H5Pget_link_phase_change + * Calls H5Pget_link_phase_change * * INPUTS - * gcpl_id - Group creation property list identifier - * Outputs max_compact - Maximum number of attributes to be stored in compact storage - * min_dense - Minimum number of attributes to be stored in dense storage + * gcpl_id - Group creation property list identifier + * Outputs max_compact - Maximum number of attributes to be stored in compact storage + * min_dense - Minimum number of attributes to be stored in dense storage * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 20, 2008 + * February 20, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ) +h5pget_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ) /******/ { int ret_value = -1; @@ -4547,27 +4176,27 @@ nh5pget_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_den /****if* H5Pf/h5pget_obj_track_times_c * NAME - * h5pget_obj_track_times_c + * h5pget_obj_track_times_c * PURPOSE - * Call H5Pget_obj_track_times + * Call H5Pget_obj_track_times * * INPUTS - * plist_id - property list id + * plist_id - property list id * OUTPUTS * - * flag - TRUE/FALSE flag + * flag - TRUE/FALSE flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 22, 2008 + * February 22, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_obj_track_times_c(hid_t_f *plist_id, int_f *flag) +h5pget_obj_track_times_c(hid_t_f *plist_id, int_f *flag) /******/ { int ret_value = -1; @@ -4589,25 +4218,25 @@ nh5pget_obj_track_times_c(hid_t_f *plist_id, int_f *flag) /****if* H5Pf/h5pset_obj_track_times_c * NAME - * h5pset_obj_track_times_c + * h5pset_obj_track_times_c * PURPOSE - * Call H5Pset_obj_track_times + * Call H5Pset_obj_track_times * * INPUTS - * plist_id - property list id - * flag - TRUE/FALSE flag + * plist_id - property list id + * flag - TRUE/FALSE flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 22, 2008 + * February 22, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_obj_track_times_c(hid_t_f *plist_id, int_f *flag) +h5pset_obj_track_times_c(hid_t_f *plist_id, int_f *flag) /******/ { int ret_value = -1; @@ -4629,28 +4258,28 @@ nh5pset_obj_track_times_c(hid_t_f *plist_id, int_f *flag) /****if* H5Pf/h5pset_create_inter_group_c * NAME - * h5pset_create_inter_group_c + * h5pset_create_inter_group_c * PURPOSE - * Calls H5Pset_create_intermediate_group + * Calls H5Pset_create_intermediate_group * * INPUTS * * lcpl_id - Link creation property list identifier - * crt_intermed_group - crt_intermed_group specifying whether - * to create intermediate groups upon the - * creation of an object + * crt_intermed_group - crt_intermed_group specifying whether + * to create intermediate groups upon the + * creation of an object * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * February 22, 2008 + * February 22, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) +h5pset_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) /******/ { int ret_value = -1; @@ -4668,28 +4297,28 @@ nh5pset_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) /****if* H5Pf/h5pget_link_creation_order_c * NAME - * h5pget_link_creation_order_c + * h5pget_link_creation_order_c * PURPOSE - * Calls H5Pget_link_creation_order + * Calls H5Pget_link_creation_order * * INPUTS * - * gcpl_id - Group creation property list identifier + * gcpl_id - Group creation property list identifier * OUTPUTS * - * crt_order_flags - Creation order flag(s) + * crt_order_flags - Creation order flag(s) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags) +h5pget_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags) /******/ { int ret_value = -1; @@ -4711,30 +4340,30 @@ nh5pget_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags) /****if* H5Pf/h5pset_char_encoding_c * NAME - * h5pset_char_encoding_c + * h5pset_char_encoding_c * PURPOSE * Calls H5Pset_char_encoding * * INPUTS * - * plist_id - Property list identifier - * encoding - String encoding character set: + * plist_id - Property list identifier + * encoding - String encoding character set: * H5T_CSET_ASCII_F -> US ASCII * H5T_CSET_UTF8_F -> UTF-8 Unicode encoding * OUTPUTS * NONE * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_char_encoding_c(hid_t_f *plist_id, int_f *encoding) +h5pset_char_encoding_c(hid_t_f *plist_id, int_f *encoding) /******/ { int ret_value = -1; @@ -4753,30 +4382,30 @@ nh5pset_char_encoding_c(hid_t_f *plist_id, int_f *encoding) /****if* H5Pf/h5pget_char_encoding_c * NAME - * h5pget_char_encoding_c + * h5pget_char_encoding_c * PURPOSE * Calls H5Pget_char_encoding * * INPUTS * - * plist_id - Property list identifier + * plist_id - Property list identifier * OUTPUTS * - * encoding - Encoding character set: + * encoding - Encoding character set: * H5T_CSET_ASCII_F -> US ASCII * H5T_CSET_UTF8_F -> UTF-8 Unicode encoding * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_char_encoding_c(hid_t_f *plist_id, int_f *encoding) +h5pget_char_encoding_c(hid_t_f *plist_id, int_f *encoding) /******/ { int ret_value = -1; @@ -4796,30 +4425,30 @@ nh5pget_char_encoding_c(hid_t_f *plist_id, int_f *encoding) /****if* H5Pf/h5pset_copy_object_c * NAME - * h5pset_copy_object_c + * h5pset_copy_object_c * PURPOSE * Calls H5Pset_copy_object * * INPUTS * - * ocp_plist_id - Object copy property list identifier - * copy_options - Copy option(s) to be set + * ocp_plist_id - Object copy property list identifier + * copy_options - Copy option(s) to be set * * OUTPUTS * * NONE * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) +h5pset_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) /******/ { int ret_value = -1; @@ -4836,29 +4465,29 @@ nh5pset_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) /****if* H5Pf/h5pget_copy_object_c * NAME - * h5pget_copy_object_c + * h5pget_copy_object_c * PURPOSE * Calls H5Pget_copy_object * * INPUTS * - * ocp_plist_id - Object copy property list identifier + * ocp_plist_id - Object copy property list identifier * * OUTPUTS * - * copy_options - Copy option(s) to be get + * copy_options - Copy option(s) to be get * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 3, 2008 + * March 3, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) +h5pget_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) /******/ { int ret_value = -1; @@ -4878,31 +4507,31 @@ nh5pget_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options) /****if* H5Pf/h5pget_data_transform_c * NAME - * h5pget_data_transform_c + * h5pget_data_transform_c * PURPOSE - * Calls H5Pget_data_transform + * Calls H5Pget_data_transform * INPUTS * - * prp_id - property list identifier to query - * expression_len - buffer size transorm expression + * prp_id - property list identifier to query + * expression_len - buffer size transorm expression * - * Output: - * expression - buffer to hold transform expression + * Output: + * expression - buffer to hold transform expression * * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 19, 2008 + * March 19, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len, size_t_f *size) +h5pget_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len, size_t_f *size) /******/ { char *c_expression = NULL; /* Buffer to hold C string */ @@ -4940,31 +4569,31 @@ done: /****if* H5Pf/h5pset_data_transform_c * NAME - * h5pset_data_transform_c + * h5pset_data_transform_c * PURPOSE - * Calls H5Pset_data_transform + * Calls H5Pset_data_transform * INPUTS * - * prp_id - property list identifier to query - * expression - buffer to hold transform expression - * expression_len - buffer size transorm expression + * prp_id - property list identifier to query + * expression - buffer to hold transform expression + * expression_len - buffer size transorm expression * - * Output: + * Output: * * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 19, 2008 + * March 19, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len) +h5pset_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len) /******/ { char* c_expression = NULL; /* Buffer to hold C string */ @@ -4991,29 +4620,29 @@ done: /****if* H5Pf/h5pget_local_heap_size_hint_c * NAME - * h5pget_local_heap_size_hint_c + * h5pget_local_heap_size_hint_c * PURPOSE - * Calls H5Pget_local_heap_size_hint + * Calls H5Pget_local_heap_size_hint * INPUTS * - * gcpl_id - Group creation property list identifier + * gcpl_id - Group creation property list identifier * - * Output: - * size_hint - Hint for size of local heap + * Output: + * size_hint - Hint for size of local heap * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) +h5pget_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) /******/ { int_f ret_value = -1; /* Return value */ @@ -5032,30 +4661,30 @@ nh5pget_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) /****if* H5Pf/h5pget_est_link_info_c * NAME - * h5pget_est_link_info_c + * h5pget_est_link_info_c * PURPOSE - * Calls H5Pget_est_link_info + * Calls H5Pget_est_link_info * INPUTS * - * gcpl_id - Group creation property list identifier + * gcpl_id - Group creation property list identifier * - * Output: - * est_num_entries - Estimated number of links to be inserted into group - * est_name_len - Estimated average length of link names + * Output: + * est_num_entries - Estimated number of links to be inserted into group + * est_name_len - Estimated average length of link names * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len) +h5pget_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len) /******/ { int_f ret_value = -1; /* Return value */ @@ -5077,30 +4706,30 @@ nh5pget_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_nam /****if* H5Pf/h5pset_local_heap_size_hint_c * NAME - * h5pset_local_heap_size_hint_c + * h5pset_local_heap_size_hint_c * PURPOSE - * Calls H5Pset_local_heap_size_hint + * Calls H5Pset_local_heap_size_hint * INPUTS * - * gcpl_id - Group creation property list identifier - * size_hint - Hint for size of local heap + * gcpl_id - Group creation property list identifier + * size_hint - Hint for size of local heap * - * Output: + * Output: * * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) +h5pset_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) /******/ { int_f ret_value = -1; /* Return value */ @@ -5117,30 +4746,30 @@ nh5pset_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint) /****if* H5Pf/h5pset_est_link_info_c * NAME - * h5pset_est_link_info_c + * h5pset_est_link_info_c * PURPOSE - * Calls H5Pset_est_link_info + * Calls H5Pset_est_link_info * INPUTS * - * gcpl_id - Group creation property list identifier - * est_num_entries - Estimated number of links to be inserted into group - * est_name_len - Estimated average length of link names + * gcpl_id - Group creation property list identifier + * est_num_entries - Estimated number of links to be inserted into group + * est_name_len - Estimated average length of link names * - * Output: + * Output: * RETURNS * - * Success: 0 + * Success: 0 * Failure: -1 * * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len) +h5pset_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len) /******/ { int_f ret_value = -1; /* Return value */ @@ -5157,26 +4786,26 @@ nh5pset_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_nam /****if* H5Pf/h5pset_link_phase_change_c * NAME - * h5pset_link_phase_change_c + * h5pset_link_phase_change_c * PURPOSE - * Calls H5Pset_link_phase_change + * Calls H5Pset_link_phase_change * * INPUTS - * gcpl_id - Group creation property list identifier - * max_compact - Maximum number of attributes to be stored in compact storage - * min_dense - Minimum number of attributes to be stored in dense storage - * Outputs + * gcpl_id - Group creation property list identifier + * max_compact - Maximum number of attributes to be stored in compact storage + * min_dense - Minimum number of attributes to be stored in dense storage + * Outputs * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ) +h5pset_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ) /******/ { int ret_value = -1; @@ -5194,28 +4823,28 @@ nh5pset_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_den /****if* H5Pf/h5pset_fapl_direct_c * NAME - * h5pset_fapl_direct_c + * h5pset_fapl_direct_c * PURPOSE - * Calls H5Pset_fapl_direct + * Calls H5Pset_fapl_direct * * INPUTS * - * fapl_id - File access property list identifier - * alignment - Required memory alignment boundary - * block_size - File system block size - * cbuf_size - Copy buffer size - * Outputs + * fapl_id - File access property list identifier + * alignment - Required memory alignment boundary + * block_size - File system block size + * cbuf_size - Copy buffer size + * Outputs * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED *alignment, size_t_f H5_ATTR_UNUSED *block_size, size_t_f H5_ATTR_UNUSED *cbuf_size) +h5pset_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED *alignment, size_t_f H5_ATTR_UNUSED *block_size, size_t_f H5_ATTR_UNUSED *cbuf_size) /******/ { int ret_value = -1; @@ -5236,29 +4865,29 @@ nh5pset_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED * /****if* H5Pf/h5pget_fapl_direct_c * NAME - * h5pget_fapl_direct_c + * h5pget_fapl_direct_c * PURPOSE - * Calls H5Pget_fapl_direct + * Calls H5Pget_fapl_direct * * INPUTS * - * fapl_id - File access property list identifier + * fapl_id - File access property list identifier * OUTPUTS * - * alignment - Required memory alignment boundary - * block_size - File system block size - * cbuf_size - Copy buffer size + * alignment - Required memory alignment boundary + * block_size - File system block size + * cbuf_size - Copy buffer size * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED *alignment, size_t_f H5_ATTR_UNUSED *block_size, size_t_f H5_ATTR_UNUSED *cbuf_size) +h5pget_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED *alignment, size_t_f H5_ATTR_UNUSED *block_size, size_t_f H5_ATTR_UNUSED *cbuf_size) /******/ { int ret_value = -1; @@ -5285,27 +4914,27 @@ nh5pget_fapl_direct_c(hid_t_f H5_ATTR_UNUSED *fapl_id, size_t_f H5_ATTR_UNUSED * /****if* H5Pf/h5pset_attr_phase_change_c * NAME - * h5pset_attr_phase_change_c + * h5pset_attr_phase_change_c * PURPOSE - * Calls H5Pset_attr_phase_change + * Calls H5Pset_attr_phase_change * * INPUTS - * ocpl_id - Object (dataset or group) creation property list identifier - * max_compact - Maximum number of attributes to be stored in compact storage - * min_dense - Minimum number of attributes to be stored in dense storage + * ocpl_id - Object (dataset or group) creation property list identifier + * max_compact - Maximum number of attributes to be stored in compact storage + * min_dense - Minimum number of attributes to be stored in dense storage * OUTPUTS * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ) +h5pset_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ) /******/ { int ret_value = -1; @@ -5322,25 +4951,25 @@ nh5pset_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_den /****if* H5Pf/h5pset_nbit_c * NAME - * h5pset_nbit_c + * h5pset_nbit_c * PURPOSE - * Calls H5Pset_nbit + * Calls H5Pset_nbit * * INPUTS - * plist_id - Dataset creation property list identifier + * plist_id - Dataset creation property list identifier * OUTPUTS * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 21, 2008 + * March 21, 2008 * HISTORY * * SOURCE */ int_f -nh5pset_nbit_c(hid_t_f *plist_id ) +h5pset_nbit_c(hid_t_f *plist_id ) /******/ { int ret_value = -1; @@ -5373,7 +5002,7 @@ nh5pset_nbit_c(hid_t_f *plist_id ) * SOURCE */ int_f -nh5pset_scaleoffset_c(hid_t_f *plist_id, int_f *scale_type, int_f *scale_factor ) +h5pset_scaleoffset_c(hid_t_f *plist_id, int_f *scale_type, int_f *scale_factor ) /******/ { int ret_value = -1; @@ -5408,7 +5037,7 @@ nh5pset_scaleoffset_c(hid_t_f *plist_id, int_f *scale_type, int_f *scale_factor * SOURCE */ int_f -nh5pset_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) +h5pset_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) /******/ { int ret_value = -1; @@ -5425,29 +5054,29 @@ nh5pset_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) /****if* H5Pf/h5pget_nlinks * NAME - * h5pget_nlinks + * h5pget_nlinks * PURPOSE - * Calls H5Pget_nlinks + * Calls H5Pget_nlinks * * INPUTS * - * lapl_id - File access property list identifier + * lapl_id - File access property list identifier * * OUTPUTS * - * nlinks - Maximum number of links to traverse + * nlinks - Maximum number of links to traverse * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 24, 2008 + * March 24, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) +h5pget_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) /******/ { int ret_value = -1; @@ -5466,26 +5095,26 @@ nh5pget_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks) /****if* H5Pf/h5pget_create_inter_group_c * NAME - * h5pget_create_inter_group_c + * h5pget_create_inter_group_c * PURPOSE - * Calls H5Pget_create_intermediate_group + * Calls H5Pget_create_intermediate_group * * INPUTS * * lcpl_id - Link creation property list identifier - * crt_intermed_group - Specifying whether to create intermediate groups upon - * the creation of an object + * crt_intermed_group - Specifying whether to create intermediate groups upon + * the creation of an object * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * April 4, 2008 + * April 4, 2008 * HISTORY * * SOURCE */ int_f -nh5pget_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) +h5pget_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) /******/ { int ret_value = -1; @@ -5505,22 +5134,22 @@ nh5pget_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group) } /*---------------------------------------------------------------------------- - * Name: h5pset_chunk_cache_c - * Purpose: Calls H5Pset_chunk_cache - * - * Inputs: dapl_id - Link creation property list identifier - * rdcc_nslots - - * rdcc_nbytes - - * rdcc_w0 - - * - * Returns: 0 on success, -1 on failure - * Programmer: M. Scot Breitenfeld - * April 13, 2009 - * Modifications: + * Name: h5pset_chunk_cache_c + * Purpose: Calls H5Pset_chunk_cache + * + * Inputs: dapl_id - Link creation property list identifier + * rdcc_nslots - + * rdcc_nbytes - + * rdcc_w0 - + * + * Returns: 0 on success, -1 on failure + * Programmer: M. Scot Breitenfeld + * April 13, 2009 + * Modifications: *---------------------------------------------------------------------------*/ int_f -nh5pset_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0) +h5pset_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0) { int ret_value = -1; @@ -5535,23 +5164,23 @@ nh5pset_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nb } /*---------------------------------------------------------------------------- - * Name: h5pget_chunk_cache_c - * Purpose: Calls H5Pget_chunk_cache - * - * Inputs: dapl_id - Link creation property list identifier - * Outputs: - * rdcc_nslots - - * rdcc_nbytes - - * rdcc_w0 - - * - * Returns: 0 on success, -1 on failure - * Programmer: M. Scot Breitenfeld - * April 13, 2009 - * Modifications: + * Name: h5pget_chunk_cache_c + * Purpose: Calls H5Pget_chunk_cache + * + * Inputs: dapl_id - Link creation property list identifier + * Outputs: + * rdcc_nslots - + * rdcc_nbytes - + * rdcc_w0 - + * + * Returns: 0 on success, -1 on failure + * Programmer: M. Scot Breitenfeld + * April 13, 2009 + * Modifications: *---------------------------------------------------------------------------*/ int_f -nh5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0) +h5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0) { int ret_value = -1; size_t c_rdcc_nslots; @@ -5572,18 +5201,18 @@ nh5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nb } /*---------------------------------------------------------------------------- - * Name: h5pset_file_image_c - * Purpose: Calls H5Pset_file_image + * Name: h5pset_file_image_c + * Purpose: Calls H5Pset_file_image * - * Inputs: + * Inputs: * fapl_id - File access property list identifier * buf_ptr - Pointer to the initial file image, - * or NULL if no initial file image is desired + * or NULL if no initial file image is desired * buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired * - * Returns: 0 on success, -1 on failure - * Programmer: M. Scot Breitenfeld - * February 19, 2012 + * Returns: 0 on success, -1 on failure + * Programmer: M. Scot Breitenfeld + * February 19, 2012 *---------------------------------------------------------------------------*/ int_f @@ -5601,19 +5230,19 @@ h5pset_file_image_c(hid_t_f *fapl_id, void *buf_ptr, size_t_f *buf_len) } /*---------------------------------------------------------------------------- - * Name: h5pget_file_image_c - * Purpose: Calls H5Pget_file_image + * Name: h5pget_file_image_c + * Purpose: Calls H5Pget_file_image * - * Inputs: + * Inputs: * fapl_id - File access property list identifier - * Outputs: + * Outputs: * buf_ptr - Pointer to the initial file image, - * or NULL if no initial file image is desired + * or NULL if no initial file image is desired * buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired * - * Returns: 0 on success, -1 on failure - * Programmer: M. Scot Breitenfeld - * February 19, 2012 + * Returns: 0 on success, -1 on failure + * Programmer: M. Scot Breitenfeld + * February 19, 2012 *---------------------------------------------------------------------------*/ int_f @@ -5640,3 +5269,225 @@ h5pget_file_image_c(hid_t_f *fapl_id, void **buf_ptr, size_t_f *buf_len_ptr) return ret_value; } + +#ifdef H5_HAVE_PARALLEL +/****if* H5Pf/h5pset_fapl_mpio_c + * NAME + * h5pset_fapl_mpio_c + * PURPOSE + * Call H5Pset_fapl_mpio to set mode for parallel I/O and the user + * supplied communicator and info object + * INPUTS + * prp_id - property list identifier + * comm - MPI communicator + * info - MPI info object + * RETURNS + * 0 on success, -1 on failure + * AUTHOR + * Elena Pourmal + * Thursday, October 26, 2000 + * HISTORY + * + * SOURCE +*/ +int_f +h5pset_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info) +/******/ +{ + int ret_value = -1; + hid_t c_prp_id; + herr_t ret; + MPI_Comm c_comm; + MPI_Info c_info; + c_comm = MPI_Comm_f2c(*comm); + c_info = MPI_Info_f2c(*info); + + /* + * Call H5Pset_mpi function. + */ + c_prp_id = *prp_id; + ret = H5Pset_fapl_mpio(c_prp_id, c_comm, c_info); + if (ret < 0) return ret_value; + ret_value = 0; + return ret_value; +} +/****if* H5Pf/h5pget_fapl_mpio_c + * NAME + * h5pget_fapl_mpio_c + * PURPOSE + * Call H5Pget_fapl_mpio to retrieve communicator and info object + * INPUTS + * prp_id - property list identifier + * comm - buffer to return MPI communicator + * info - buffer to return MPI info object + * RETURNS + * 0 on success, -1 on failure + * AUTHOR + * Elena Pourmal + * Thursday, October 26, 2000 + * HISTORY + * + * SOURCE +*/ +int_f +h5pget_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info) +/******/ +{ + int ret_value = -1; + hid_t c_prp_id; + herr_t ret; + MPI_Comm c_comm; + MPI_Info c_info; + + /* + * Call H5Pget_mpi function. + */ + c_prp_id = *prp_id; + ret = H5Pget_fapl_mpio(c_prp_id, &c_comm, &c_info); + if (ret < 0) return ret_value; + *comm = (int_f) MPI_Comm_c2f(c_comm); + *info = (int_f) MPI_Info_c2f(c_info); + ret_value = 0; + return ret_value; +} +/****if* H5Pf/h5pset_dxpl_mpio_c + * NAME + * h5pset_dxpl_mpio_c + * PURPOSE + * Call H5Pset_dxpl_mpio to set transfer mode of the dataset + * trasfer property list + * INPUTS + * prp_id - property list identifier + * data_xfer_mode - transfer mode + * RETURNS + * 0 on success, -1 on failure + * AUTHOR + * Elena Pourmal + * Thursday, October 26, 2000 + * HISTORY + * + * SOURCE +*/ +int_f +h5pset_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode) +/******/ +{ + int ret_value = -1; + hid_t c_prp_id; + herr_t ret; + H5FD_mpio_xfer_t c_data_xfer_mode; +/* + switch (*data_xfer_mode) { + + case H5FD_MPIO_INDEPENDENT_F: + c_data_xfer_mode = H5FD_MPIO_INDEPENDENT; + break; + + case H5FD_MPIO_COLLECTIVE_F: + c_data_xfer_mode = H5FD_MPIO_COLLECTIVE; + break; + default: + return ret_value; + } +*/ + c_data_xfer_mode = (H5FD_mpio_xfer_t)*data_xfer_mode; + /* + * Call H5Pset_dxpl_mpio function. + */ + c_prp_id = *prp_id; + ret = H5Pset_dxpl_mpio(c_prp_id, c_data_xfer_mode); + if (ret < 0) return ret_value; + ret_value = 0; + return ret_value; +} + +/****if* H5Pf/h5pget_dxpl_mpio_c + * NAME + * h5pget_dxpl_mpio_c + * PURPOSE + * Call H5Pget_dxpl_mpio to get transfer mode of the dataset + * trasfer property list + * INPUTS + * prp_id - property list identifier + * data_xfer_mode - buffer to retrieve transfer mode + * RETURNS + * 0 on success, -1 on failure + * AUTHOR + * Elena Pourmal + * Thursday, June 15, 2000 + * HISTORY + * + * SOURCE +*/ +int_f +h5pget_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode) +/******/ +{ + int ret_value = -1; + hid_t c_prp_id; + herr_t ret; + H5FD_mpio_xfer_t c_data_xfer_mode; + + /* + * Call H5Pget_xfer function. + */ + c_prp_id = *prp_id; + ret = H5Pget_dxpl_mpio(c_prp_id, &c_data_xfer_mode); + if (ret < 0) return ret_value; + *data_xfer_mode = (int_f)c_data_xfer_mode; +/* + switch (c_data_xfer_mode) { + + case H5FD_MPIO_INDEPENDENT: + *data_xfer_mode = H5FD_MPIO_INDEPENDENT_F; + break; + + case H5FD_MPIO_COLLECTIVE: + *data_xfer_mode = H5FD_MPIO_COLLECTIVE_F; + break; + + default: + return ret_value; + } +*/ + ret_value = 0; + return ret_value; +} + +/****if* H5Pf/h5pget_mpio_actual_io_mode_c + * NAME + * h5pget_mpio_actual_io_mode_c + * PURPOSE + * Calls H5Pget_mpio_actual_io_mode + * + * INPUTS + * dxpl_id - Dataset transfer property list identifier. + * OUTPUTS + * actual_io_mode - The type of I/O performed by this process. + * + * RETURNS + * 0 on success, -1 on failure + * AUTHOR + * M. Scot Breitenfeld + * July 27, 2012 + * SOURCE +*/ +int_f +h5pget_mpio_actual_io_mode_c(hid_t_f *dxpl_id, int_f *actual_io_mode) +/******/ +{ + int ret_value = -1; + H5D_mpio_actual_io_mode_t c_actual_io_mode; + + /* + * Call H5Pget_mpio_actual_io_mode_f function. + */ + if( (H5Pget_mpio_actual_io_mode((hid_t)*dxpl_id, &c_actual_io_mode)) <0 ) + return ret_value; /* error occurred */ + + *actual_io_mode =(int_f)c_actual_io_mode; + + ret_value = 0; + return ret_value; +} +#endif /*H5_HAVE_PARALLEL*/ diff --git a/fortran/src/H5Pff.F90 b/fortran/src/H5Pff.F90 new file mode 100644 index 0000000..97f907b --- /dev/null +++ b/fortran/src/H5Pff.F90 @@ -0,0 +1,7327 @@ +!****h* ROBODoc/H5Pff +! +! NAME +! H5P +! +! PURPOSE +! This file contains Fortran interfaces for H5P functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. *S +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5P function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +!***** + +#include + +MODULE H5P + + USE, INTRINSIC :: ISO_C_BINDING + USE H5GLOBAL + + INTERFACE h5pset_fapl_multi_f + MODULE PROCEDURE h5pset_fapl_multi_l + MODULE PROCEDURE h5pset_fapl_multi_s + END INTERFACE + + INTERFACE h5pset_fill_value_f + MODULE PROCEDURE h5pset_fill_value_integer + MODULE PROCEDURE h5pset_fill_value_char + ! Recommended procedure: + MODULE PROCEDURE h5pset_fill_value_ptr + + END INTERFACE + + INTERFACE h5pget_fill_value_f + MODULE PROCEDURE h5pget_fill_value_integer + MODULE PROCEDURE h5pget_fill_value_char + ! Recommended procedure: + MODULE PROCEDURE h5pget_fill_value_ptr + + END INTERFACE + + INTERFACE h5pset_f + MODULE PROCEDURE h5pset_integer + MODULE PROCEDURE h5pset_char + ! Recommended procedure: + MODULE PROCEDURE h5pset_ptr + + END INTERFACE + + INTERFACE h5pget_f + MODULE PROCEDURE h5pget_integer + MODULE PROCEDURE h5pget_char + ! Recommended procedure: + MODULE PROCEDURE h5pget_ptr + END INTERFACE + + INTERFACE h5pregister_f + MODULE PROCEDURE h5pregister_integer + ! Recommended procedure: + MODULE PROCEDURE h5pregister_ptr + END INTERFACE + + INTERFACE h5pinsert_f + MODULE PROCEDURE h5pinsert_integer + MODULE PROCEDURE h5pinsert_char + ! Recommended procedure: + MODULE PROCEDURE h5pinsert_ptr + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pget_fill_value_c(prp_id, type_id, fillvalue) & + BIND(C, NAME='h5pget_fill_value_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: type_id + TYPE(C_PTR), VALUE :: fillvalue + END FUNCTION h5pget_fill_value_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pset_fill_value_c(prp_id, type_id, fillvalue) & + BIND(C, NAME='h5pset_fill_value_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(IN) :: type_id + TYPE(C_PTR), VALUE :: fillvalue + END FUNCTION h5pset_fill_value_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pset_c(prp_id, name, name_len, value) & + BIND(C, NAME='h5pset_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: name_len + TYPE(C_PTR), VALUE :: value + END FUNCTION h5pset_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pget_c(prp_id, name, name_len, value) & + BIND(C, NAME='h5pget_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: name_len + TYPE(C_PTR), VALUE :: value + END FUNCTION h5pget_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pregister_c(class, name, name_len, size, value) & + BIND(C, NAME='h5pregister_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + INTEGER(SIZE_T), INTENT(IN) :: size + TYPE(C_PTR), INTENT(IN), VALUE :: value + END FUNCTION h5pregister_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5pinsert_c(plist, name, name_len, size, value) & + BIND(C, NAME='h5pinsert_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + INTEGER(SIZE_T), INTENT(IN) :: size + TYPE(C_PTR), INTENT(IN), VALUE :: value + END FUNCTION h5pinsert_c + END INTERFACE + +CONTAINS + +!****s* H5P/h5pcreate_f +! NAME +! h5pcreate_f +! +! PURPOSE +! Creates a new property as an instance of a property +! list class. +! +! INPUTS +! class - type of the property class to be created. +! Possible values are: +! H5P_OBJECT_CREATE_F +! H5P_FILE_CREATE_F +! H5P_FILE_ACCESS_F +! H5P_DATASET_CREATE_F +! H5P_DATASET_ACCESS_F +! H5P_DATASET_XFER_F +! H5P_FILE_MOUNT_F +! H5P_GROUP_CREATE_F +! H5P_GROUP_ACCESS_F +! H5P_DATATYPE_CREATE_F +! H5P_DATATYPE_ACCESS_F +! H5P_STRING_CREATE_F +! H5P_ATTRIBUTE_CREATE _F +! H5P_OBJECT_COPY_F +! H5P_LINK_CREATE_F +! H5P_LINK_ACCESS_F +! +! OUTPUTS +! prp_id - property list identifier +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pcreate_f(class, prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + INTEGER(HID_T), INTENT(OUT) :: prp_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5pcreate_c(class, prp_id) & + BIND(C,NAME='h5pcreate_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + INTEGER(HID_T), INTENT(OUT) :: prp_id + END FUNCTION h5pcreate_c + END INTERFACE + + hdferr = h5pcreate_c(class, prp_id) + END SUBROUTINE h5pcreate_f + +!****s* H5P/h5pset_preserve_f +! NAME +! h5pset_preserve_f +! +! PURPOSE +! Sets the dataset transfer property list status to +! TRUE or FALSE for initializing compound datatype +! members during write/read operations. +! +! INPUTS +! prp_id - property list identifier +! flag - status flag +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Datatype of the flag parameter is changed from +! INTEGER to LOGICAL June 4, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_preserve_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + LOGICAL, INTENT(IN) :: flag ! TRUE/FALSE flag to set the dataset + ! transfer property for partila writing/reading + ! compound datatype + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag_c + + INTERFACE + INTEGER FUNCTION h5pset_preserve_c(prp_id, flag_c) & + BIND(C,NAME='h5pset_preserve_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: flag_c + END FUNCTION h5pset_preserve_c + END INTERFACE + flag_c = 0 + IF(flag) flag_c = 1 + hdferr = h5pset_preserve_c(prp_id, flag_c) + END SUBROUTINE h5pset_preserve_f + +!****s* H5P/h5pget_preserve_f +! NAME +! h5pget_preserve_f +! +! PURPOSE +! Checks status of the dataset transfer property list. +! +! INPUTS +! prp_id - property list identifier +! +! OUTPUTS +! flag - status flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Datatype of the flag parameter is changed from +! INTEGER to LOGICAL +! June 4, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_preserve_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag. Shows status of the dataset's + ! transfer property for partial writing/reading + ! compound datatype + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag_c + + INTERFACE + INTEGER FUNCTION h5pget_preserve_c(prp_id, flag_c) & + BIND(C,NAME='h5pget_preserve_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: flag_c + END FUNCTION h5pget_preserve_c + END INTERFACE + + hdferr = h5pget_preserve_c(prp_id, flag_c) + flag = .FALSE. + IF(flag_c .EQ. 1) flag = .TRUE. + END SUBROUTINE h5pget_preserve_f + +!****s* H5P/h5pget_class_f +! NAME +! h5pget_class_f +! +! PURPOSE +! Returns the property list class for a property list. +! +! INPUTS +! prp_id - property list identifier +! +! OUTPUTS +! classtype - property list class +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_f(prp_id, classtype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: classtype ! The type of the property list + ! to be created. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_class_c(prp_id, classtype) & + BIND(C,NAME='h5pget_class_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: classtype + END FUNCTION h5pget_class_c + END INTERFACE + + hdferr = h5pget_class_c(prp_id, classtype) + END SUBROUTINE h5pget_class_f + +!****s* H5P/h5pcopy_f +! NAME +! h5pcopy_f +! +! PURPOSE +! Copies an existing property list to create a new +! property list +! +! INPUTS +! prp_id - property list identifier +! OUTPUTS +! new_prp_id - new property list identifier +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pcopy_f(prp_id, new_prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: new_prp_id ! Identifier of property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pcopy_c(prp_id, new_prp_id) & + BIND(C,NAME='h5pcopy_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: new_prp_id + END FUNCTION h5pcopy_c + END INTERFACE + + hdferr = h5pcopy_c(prp_id, new_prp_id) + END SUBROUTINE h5pcopy_f + +!****s* H5P/h5pclose_f +! NAME +! h5pclose_f +! +! PURPOSE +! Terminates access to a property list. +! +! INPUTS +! prp_id - identifier of the property list to +! terminate access to. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pclose_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pclose_c(prp_id) & + BIND(C,NAME='h5pclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pclose_c + END INTERFACE + + hdferr = h5pclose_c(prp_id) + END SUBROUTINE h5pclose_f + +!****s* H5P/h5pset_chunk_f +! NAME +! h5pset_chunk_f +! +! PURPOSE +! Sets the size of the chunks used to store +! a chunked layout dataset. +! +! INPUTS +! prp_id - datatset creation property list identifier +! ndims - number of dimensions for each chunk +! dims - array with dimension sizes for each chunk +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_chunk_f(prp_id, ndims, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims + ! Array containing sizes of + ! chunk dimensions + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_chunk_c(prp_id, ndims, dims) & + BIND(C,NAME='h5pset_chunk_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ndims + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims + END FUNCTION h5pset_chunk_c + END INTERFACE + + hdferr = h5pset_chunk_c(prp_id, ndims, dims) + END SUBROUTINE h5pset_chunk_f + +!****s* H5P/h5pget_chunk_f +! NAME +! h5pget_chunk_f +! +! PURPOSE +! Retrieves the size of chunks for the raw data of a +! chunked layout dataset +! +! INPUTS +! prp_id - property list identifier +! ndims - size of dims array +! OUTPUTS +! dims - array with dimension sizes for each chunk +! hdferr - error code +! Success: number of chunk dimensions +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_chunk_f(prp_id, ndims, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions to + ! to return + INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims + ! Array containing sizes of + ! chunk dimensions + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! number of chunk dimensions on success, + ! -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_chunk_c(prp_id, ndims, dims) & + BIND(C,NAME='h5pget_chunk_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER :: ndims + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims + END FUNCTION h5pget_chunk_c + END INTERFACE + + hdferr = h5pget_chunk_c(prp_id, ndims, dims) + END SUBROUTINE h5pget_chunk_f + +!****s* H5P/h5pset_deflate_f +! NAME +! h5pset_deflate_f +! +! PURPOSE +! Sets compression method and compression level. +! +! INPUTS +! prp_id - property list identifier +! level - compression level +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_deflate_f(prp_id, level, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: level ! Compression level + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pset_deflate_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_deflate_c(prp_id, level) & + BIND(C,NAME='h5pset_deflate_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: level + END FUNCTION h5pset_deflate_c + END INTERFACE + hdferr = h5pset_deflate_c(prp_id, level) + + END SUBROUTINE h5pset_deflate_f + +!****s* H5P/h5pget_version_f +! NAME +! h5pget_version_f +! +! PURPOSE +! Retrieves the version information of various objects +! for a file creation property list +! +! INPUTS +! prp_id - file createion property list identifier +! OUTPUTS +! boot - super block version number +! freelist - global freelist version number +! stab - symbol table version number +! shhdr - shared object header version number +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_version_f(prp_id, boot, freelist, & + stab, shhdr, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, DIMENSION(:), INTENT(OUT) :: boot ! Array to put boot + ! block version number + INTEGER, DIMENSION(:), INTENT(OUT) :: freelist ! Array to put global + ! Freelist version number + + INTEGER, DIMENSION(:), INTENT(OUT) :: stab ! Array to put symbol + ! table version number + INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr ! Array to put shared + ! object header version number + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_version_c(prp_id, boot, freelist, stab, shhdr) & + BIND(C,NAME='h5pget_version_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, DIMENSION(*), INTENT(OUT) :: boot + INTEGER, DIMENSION(*), INTENT(OUT) :: freelist + INTEGER, DIMENSION(*), INTENT(OUT) :: stab + INTEGER, DIMENSION(*), INTENT(OUT) :: shhdr + END FUNCTION h5pget_version_c + END INTERFACE + + hdferr = h5pget_version_c(prp_id, boot, freelist, stab, shhdr) + END SUBROUTINE h5pget_version_f + +!****s* H5P/h5pset_userblock_f +! NAME +! h5pset_userblock_f +! +! PURPOSE +! Sets user block size +! +! INPUTS +! prp_id - file creation property list to modify +! size - size of the user-block in bytes +! +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_userblock_f (prp_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_userblock_c(prp_id, size) & + BIND(C,NAME='h5pset_userblock_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_userblock_c + END INTERFACE + + hdferr = h5pset_userblock_c(prp_id, size) + END SUBROUTINE h5pset_userblock_f + +!****s* H5P/h5pget_userblock_f +! NAME +! h5pget_userblock_f +! +! PURPOSE +! Gets user block size. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! block_size - size of the user block in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_userblock_f(prp_id, block_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: block_size ! Size of the + ! user-block in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_userblock_c(prp_id, block_size) & + BIND(C,NAME='h5pget_userblock_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: block_size + END FUNCTION h5pget_userblock_c + END INTERFACE + hdferr = h5pget_userblock_c(prp_id, block_size) + END SUBROUTINE h5pget_userblock_f + +!****s* H5P/h5pset_sizes_f +! NAME +! h5pset_sizes_f +! +! PURPOSE +! Sets the byte size of the offsets and lengths used +! to address objects in an HDF5 file. +! +! INPUTS +! prp_id - file creation property list identifier +! sizeof_addr - size of an object offset in bytes +! sizeof_size - size of an object length in bytes +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sizes_f (prp_id, sizeof_addr, sizeof_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object + ! offset in bytes + INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object + ! length in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) & + BIND(C,NAME='h5pset_sizes_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr + INTEGER(SIZE_T), INTENT(IN) :: sizeof_size + END FUNCTION h5pset_sizes_c + END INTERFACE + + hdferr = h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) + END SUBROUTINE h5pset_sizes_f + +!****s* H5P/h5pget_sizes_f +! NAME +! h5pget_sizes_f +! +! PURPOSE +! Retrieves the size of the offsets and lengths used +! in an HDF5 file +! +! INPUTS +! prp_id - file creation property list identifier +! OUTPUTS +! +! sizeof_addr - size of an object offset in bytes +! sizeof_size - size of an object length in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sizes_f(prp_id, sizeof_addr, sizeof_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr ! Size of an object + ! offset in bytes + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size ! Size of an object + ! length in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) & + BIND(C,NAME='h5pget_sizes_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr + INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size + END FUNCTION h5pget_sizes_c + END INTERFACE + + hdferr = h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) + END SUBROUTINE h5pget_sizes_f + +!****s* H5P/h5pset_sym_k_f +! NAME +! h5pset_sym_k_f +! +! PURPOSE +! Sets the size of parameters used to control the +!symbol table nodes +! +! INPUTS +! +! prp_id - file creation property list identifier +! ik - symbol table tree rank +! lk - symbol table node size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sym_k_f (prp_id, ik, lk, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ik ! Symbol table tree rank + INTEGER, INTENT(IN) :: lk ! Symbol table node size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_sym_k_c(prp_id, ik, lk) & + BIND(C,NAME='h5pset_sym_k_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ik + INTEGER, INTENT(IN) :: lk + END FUNCTION h5pset_sym_k_c + END INTERFACE + + hdferr = h5pset_sym_k_c(prp_id, ik, lk) + END SUBROUTINE h5pset_sym_k_f +!****s* H5P/h5pget_sym_k_f +! NAME +! h5pget_sym_k_f +! +! PURPOSE +! Retrieves the size of the symbol table B-tree 1/2 rank +! and the symbol table leaf node 1/2 size. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! ik - symbol table tree 1/2 rank +! lk - symbol table node 1/2 size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sym_k_f(prp_id, ik, lk, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: ik ! Symbol table tree rank + INTEGER, INTENT(OUT) :: lk ! Symbol table node size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_sym_k_c(prp_id, ik, lk) & + BIND(C,NAME='h5pget_sym_k_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: ik + INTEGER, INTENT(OUT) :: lk + END FUNCTION h5pget_sym_k_c + END INTERFACE + + hdferr = h5pget_sym_k_c(prp_id, ik, lk) + END SUBROUTINE h5pget_sym_k_f +!****s* H5P/h5pset_istore_k_f +! NAME +! h5pset_istore_k_f +! +! PURPOSE +! Sets the size of the parameter used to control the +! B-trees for indexing chunked datasets +! +! INPUTS +! +! prp_id - file creation property list identifier +! ik - 1/2 rank of chunked storage B-tree +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_istore_k_f (prp_id, ik, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: ik ! 1/2 rank of chunked storage B-tree + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_istore_k_c(prp_id, ik) & + BIND(C,NAME='h5pset_istore_k_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: ik + END FUNCTION h5pset_istore_k_c + END INTERFACE + + hdferr = h5pset_istore_k_c(prp_id, ik) + END SUBROUTINE h5pset_istore_k_f + +!****s* H5P/h5pget_istore_k_f +! NAME +! h5pget_istore_k_f +! +! PURPOSE +! Queries the 1/2 rank of an indexed storage B-tree. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! ik - 1/2 rank of chunked storage B-tree +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_istore_k_f(prp_id, ik, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: ik ! 1/2 rank of chunked storage B-tree + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_istore_k_c(prp_id, ik) & + BIND(C,NAME='h5pget_istore_k_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: ik + END FUNCTION h5pget_istore_k_c + END INTERFACE + + hdferr = h5pget_istore_k_c(prp_id, ik) + END SUBROUTINE h5pget_istore_k_f + +!****s* H5P/h5pget_driver_f +! NAME +! h5pget_driver_f +! +! PURPOSE +! Returns low-lever driver identifier. +! +! INPUTS +! +! prp_id - file access or data transfer property +! list identifier. +! OUTPUTS +! +! driver - low-level driver identifier +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_driver_f(prp_id, driver, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: driver ! Low-level file driver identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_driver_c(prp_id, driver) & + BIND(C,NAME='h5pget_driver_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: driver + END FUNCTION h5pget_driver_c + END INTERFACE + + hdferr = h5pget_driver_c(prp_id, driver) + END SUBROUTINE h5pget_driver_f + +!****s* H5P/h5pset_fapl_stdio_f +! NAME +! h5pset_fapl_stdio_f +! +! PURPOSE +! Sets the standard I/O driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_stdio_f (prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fapl_stdio_c(prp_id) & + BIND(C,NAME='h5pset_fapl_stdio_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_fapl_stdio_c + END INTERFACE + + hdferr = h5pset_fapl_stdio_c(prp_id) + END SUBROUTINE h5pset_fapl_stdio_f + +!****s* H5P/h5pget_stdio_f +! NAME +! h5pget_stdio_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE +! SUBROUTINE h5pget_stdio_f (prp_id, io, hdferr) +! +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER, INTENT(OUT) :: io ! value indicates that the file + !access property list is set to + !the stdio driver +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_stdio_c +! hdferr = h5pget_stdio_c(prp_id, io) +! END SUBROUTINE h5pget_stdio_f + +!****s* H5P/h5pset_fapl_sec2_f +! NAME +! h5pset_fapl_sec2_f +! +! PURPOSE +! Sets the sec2 driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_sec2_f (prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fapl_sec2_c(prp_id) & + BIND(C,NAME='h5pset_fapl_sec2_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + END FUNCTION h5pset_fapl_sec2_c + END INTERFACE + + hdferr = h5pset_fapl_sec2_c(prp_id) + END SUBROUTINE h5pset_fapl_sec2_f + +!****s* H5P/h5pget_sec2_f +! NAME +! h5pget_sec2_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE! SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER, INTENT(OUT) :: sec2 ! value indicates whether the file + !driver uses the functions declared + !in the unistd.h file +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! INTEGER, EXTERNAL :: h5pget_sec2_c +! hdferr = h5pget_sec2_c(prp_id, sec2) +! END SUBROUTINE h5pget_sec2_f + +!****s* H5P/h5pset_alignment_f +! NAME +! h5pset_alignment_f +! +! PURPOSE +! Sets alignment properties of a file access property list. +! +! INPUTS +! +! prp_id - file access property list identifier +! threshold - threshold value +! alignment - alignment value +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_alignment_f(prp_id, threshold, alignment, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: threshold ! Threshold value + INTEGER(HSIZE_T), INTENT(IN) :: alignment ! alignment value + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_alignment_c(prp_id, threshold, alignment) & + BIND(C,NAME='h5pset_alignment_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: threshold + INTEGER(HSIZE_T), INTENT(IN) :: alignment + END FUNCTION h5pset_alignment_c + END INTERFACE + + hdferr = h5pset_alignment_c(prp_id, threshold, alignment) + END SUBROUTINE h5pset_alignment_f + +!****s* H5P/h5pget_alignment_f +! NAME +! h5pget_alignment_f +! +! PURPOSE +! Retrieves the current settings for alignment +! properties from a file access property list. +! +! INPUTS +! prp_id - file access property list identifier +! +! OUTPUTS +! threshold - threshold value +! alignment - alignment value +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_alignment_f(prp_id, threshold, alignment, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: threshold ! Threshold value + INTEGER(HSIZE_T), INTENT(OUT) :: alignment ! alignment value + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_alignment_c(prp_id, threshold, alignment) & + BIND(C,NAME='h5pget_alignment_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: threshold + INTEGER(HSIZE_T), INTENT(OUT) :: alignment + END FUNCTION h5pget_alignment_c + END INTERFACE + + hdferr = h5pget_alignment_c(prp_id, threshold, alignment) + END SUBROUTINE h5pget_alignment_f + +!****s* H5P/h5pset_fapl_core_f +! NAME +! h5pset_fapl_core_f +! +! PURPOSE +! Modifies the file access property list to use the +! H5FD_CORE driver. +! +! INPUTS +! prp_id - file access property list identifier +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_core_f(prp_id, increment, backing_store, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(IN) :: increment ! File block size in bytes. + LOGICAL, INTENT(IN) :: backing_store ! Flag to indicate that + ! entire file contents are flushed to a file + ! with the same name as this core file. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: backing_store_flag + INTERFACE + INTEGER FUNCTION h5pset_fapl_core_c(prp_id, increment, backing_store_flag) & + BIND(C,NAME='h5pset_fapl_core_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(IN) :: increment + INTEGER :: backing_store_flag + END FUNCTION h5pset_fapl_core_c + END INTERFACE + backing_store_flag = 0 + IF(backing_store) backing_store_flag = 1 + hdferr = h5pset_fapl_core_c(prp_id, increment, backing_store_flag) + END SUBROUTINE h5pset_fapl_core_f + +!****s* H5P/h5pget_fapl_core_f +! NAME +! h5pget_fapl_core_f +! +! PURPOSE +! Queries core file driver properties. +! +! INPUTS +! prp_id - file access property list identifier +! OUTPUTS +! +! increment - size, in bytes, of memory increments +! backing_store - boolean flag indicating whether to write +! the file contents to disk when the file is closed. +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_core_f(prp_id, increment, backing_store, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: increment ! File block size in bytes. + LOGICAL, INTENT(OUT) :: backing_store ! Flag to indicate that + ! entire file contents are flushed to a file + ! with the same name as this core file. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: backing_store_flag + + INTERFACE + INTEGER FUNCTION h5pget_fapl_core_c(prp_id, increment, backing_store_flag) & + BIND(C,NAME='h5pget_fapl_core_c') + IMPORT :: HID_T,SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: increment + INTEGER :: backing_store_flag + END FUNCTION h5pget_fapl_core_c + END INTERFACE + + hdferr = h5pget_fapl_core_c(prp_id, increment, backing_store_flag) + backing_store =.FALSE. + IF (backing_store_flag .EQ. 1) backing_store =.TRUE. + END SUBROUTINE h5pget_fapl_core_f + +!****s* H5P/ h5pset_fapl_family_f +! NAME +! h5pset_fapl_family_f +! +! PURPOSE +! Sets the file access property list to use the family driver. +! +! INPUTS +! prp_id - file access property list identifier +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property +! list to be used for each family member +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: memb_size ! Logical size, in bytes, + ! of each family member + INTEGER(HID_T), INTENT(IN) :: memb_plist ! Identifier of the file + ! access property list for + ! each member of the family + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fapl_family_c(prp_id, memb_size, memb_plist) & + BIND(C,NAME='h5pset_fapl_family_c') + IMPORT :: HID_T,HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: memb_size + INTEGER(HID_T), INTENT(IN) :: memb_plist + END FUNCTION h5pset_fapl_family_c + END INTERFACE + + hdferr = h5pset_fapl_family_c(prp_id, memb_size, memb_plist) + END SUBROUTINE h5pset_fapl_family_f + +!****s* H5P/h5pget_fapl_family_f +! NAME +! h5pget_fapl_family_f +! +! PURPOSE +! Returns file access property list information. +! +! INPUTS +! prp_id - file access property list identifier +! OUTPUTS +! memb_size - size in bytes of each file member +! memb_plist - identifier of the file access property +! list to be used for each family member +! hdferr - error code +! Success: 0 +! Failure: -1 +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: memb_size ! Logical size, in bytes, + ! of each family member + INTEGER(HID_T), INTENT(OUT) :: memb_plist ! Identifier of the file + ! access property list for + ! each member of the family + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_fapl_family_c(prp_id, memb_size, memb_plist) & + BIND(C,NAME='h5pget_fapl_family_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(OUT) :: memb_size + INTEGER(HID_T), INTENT(OUT) :: memb_plist + END FUNCTION h5pget_fapl_family_c + END INTERFACE + + hdferr = h5pget_fapl_family_c(prp_id, memb_size, memb_plist) + END SUBROUTINE h5pget_fapl_family_f + +!****s* H5P/h5pset_cache_f +! NAME +! h5pset_cache_f +! +! PURPOSE +! Sets the meta data cache and raw data chunk +! cache parameters +! +! INPUTS +! +! prp_id - file access property list identifier +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! rdcc_w0 - preemption policy (0 or 1) +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_cache_f(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: mdc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes + REAL, INTENT(IN) :: rdcc_w0 ! Preemption policy + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) & + BIND(C,NAME='h5pset_cache_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes + REAL, INTENT(IN) :: rdcc_w0 + END FUNCTION h5pset_cache_c + END INTERFACE + + hdferr = h5pset_cache_c(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) + END SUBROUTINE h5pset_cache_f + +!****s* H5P/h5pget_cache_f +! NAME +! h5pget_cache_f +! +! PURPOSE +! Queries the meta data cache and raw data chunk cache +! parameters. +! +! INPUTS +! prp_id - file access property list identifier +! +! OUTPUTS +! mdc_nelmts - number of elements (objects) in the meta +! data cache +! rdcc_nelmts - number of elements (objects) in the raw +! data chunk cache +! rdcc_nbytes - total size of the raw data chunk cache, in bytes +! rdcc_w0 - preemption policy (0 or 1) +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Bug fix: type of the rdcc_nelmts parameter should be INTEGER +! instead of INTEGER(SIZE_T) October 10, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_cache_f(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: mdc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts ! Number of elements (objects) + ! in the meta data cache + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data + ! chunk cache, in bytes + REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) & + BIND(C,NAME='h5pget_cache_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: mdc_nelmts + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes + REAL, INTENT(OUT) :: rdcc_w0 + END FUNCTION h5pget_cache_c + END INTERFACE + + hdferr = h5pget_cache_c(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) + END SUBROUTINE h5pget_cache_f + +!****s* H5P/h5pset_fapl_split_f +! NAME +! h5pset_fapl_split_f +! +! PURPOSE +! Emulates the old split file driver. +! +! INPUTS +! +! prp_id - file access property list identifier +! meta_ext - name of the extension for the metafile +! filename +! meta_plist - identifier of the meta file access property +! list +! raw_ext - name extension for the raw file filename +! raw_plist - identifier of the raw file access property list +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_split_f(prp_id, meta_ext, meta_plist, raw_ext, raw_plist, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: meta_ext ! Name of the extension for + ! the metafile filename + INTEGER(HID_T), INTENT(IN) :: meta_plist ! Identifier of the meta file + ! access property list + CHARACTER(LEN=*), INTENT(IN) :: raw_ext ! Name extension for the raw file filename + INTEGER(HID_T), INTENT(IN) :: raw_plist ! Identifier of the raw file + ! access property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: meta_len, raw_len + INTERFACE + INTEGER FUNCTION h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) & + BIND(C,NAME='h5pset_fapl_split_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: meta_ext + INTEGER(HID_T), INTENT(IN) :: meta_plist + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: raw_ext + INTEGER(HID_T), INTENT(IN) :: raw_plist + INTEGER :: meta_len, raw_len + END FUNCTION h5pset_fapl_split_c + END INTERFACE + + meta_len = LEN(meta_ext) + raw_len = LEN(raw_ext) + hdferr = h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) + END SUBROUTINE h5pset_fapl_split_f + +!****s* H5P/h5pget_split_f +! NAME +! h5pget_split_f +! +! PURPOSE +! NOT AVAILABLE +! +! INPUTS +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! SOURCE +! SUBROUTINE h5pget_split_f(prp_id, meta_ext_size, meta_ext, meta_plist,raw_ext_size,& +! raw_ext, raw_plist, hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier +! INTEGER(SIZE_T), INTENT(IN) :: meta_ext_size ! Number of characters of the meta + ! file extension to be copied to the + ! meta_ext buffer + +! CHARACTER(LEN=*), INTENT(OUT) :: meta_ext !Name of the extension for + !the metafile filename +! INTEGER(HID_T), INTENT(OUT) :: meta_plist ! Identifier of the meta file + ! access property list +! INTEGER(SIZE_T), INTENT(IN) :: raw_ext_size ! Number of characters of the raw + ! file extension to be copied to the + ! raw_ext buffer +! CHARACTER(LEN=*), INTENT(OUT) :: raw_ext !Name extension for the raw file filename +! INTEGER(HID_T), INTENT(OUT) :: raw_plist !Identifier of the raw file + !access property list +! INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + +! INTEGER, EXTERNAL :: h5pget_split_c +! hdferr = h5pget_split_c(prp_id, meta_ext_size, meta_ext, meta_plist, & +! raw_ext_size, raw_ext, raw_plist ) +! END SUBROUTINE h5pget_split_f + +!****s* H5P/h5pset_gc_references_f +! NAME +! h5pset_gc_references_f +! +! PURPOSE +! Sets garbage collecting references flag. +! +! INPUTS +! +! prp_id - file access property list identifier +! gc_reference - flag for stting garbage collection on +! and off (1 or 0) +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_gc_references_f (prp_id, gc_reference, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: gc_reference ! The flag for garbage collecting + ! references for the file + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_gc_references_c(prp_id, gc_reference) & + BIND(C,NAME='h5pset_gc_references_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: gc_reference + END FUNCTION h5pset_gc_references_c + END INTERFACE + + hdferr = h5pset_gc_references_c(prp_id, gc_reference) + END SUBROUTINE h5pset_gc_references_f + +!****s* H5P/h5pget_gc_references_f +! NAME +! h5pget_gc_references_f +! +! PURPOSE +! Returns garbage collecting references setting. +! +! INPUTS +! +! prp_id - file access property list identifier +! OUTPUTS +! +! gc_reference - flag for stting garbage collection on +! and off (1 or 0) +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_gc_references_f(prp_id, gc_reference, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: gc_reference ! The flag for garbage collecting + ! references for the file + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_gc_references_c(prp_id, gc_reference) & + BIND(C,NAME='h5pget_gc_references_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: gc_reference + END FUNCTION h5pget_gc_references_c + END INTERFACE + + hdferr = h5pget_gc_references_c(prp_id, gc_reference) + END SUBROUTINE h5pget_gc_references_f + +!****s* H5P/h5pset_layout_f +! NAME +! h5pset_layout_f +! +! PURPOSE +! Sets the type of storage used store the raw data +! for a dataset. +! +! INPUTS +! +! prp_id - data creation property list identifier +! layout - type of storage layout for raw data +! possible values are: +! H5D_COMPACT_F +! H5D_CONTIGUOUS_F +! H5D_CHUNKED_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_layout_f (prp_id, layout, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: layout ! Type of storage layout for raw data + ! possible values are: + ! H5D_COMPACT_F + ! H5D_CONTIGUOUS_F + ! H5D_CHUNKED_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_layout_c(prp_id, layout) & + BIND(C,NAME='h5pset_layout_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: layout + END FUNCTION h5pset_layout_c + END INTERFACE + + hdferr = h5pset_layout_c(prp_id, layout) + END SUBROUTINE h5pset_layout_f + +!****s* H5P/h5pget_layout_f +! NAME +! h5pget_layout_f +! +! PURPOSE +! Returns the layout of the raw data for a dataset. +! +! INPUTS +! +! prp_id - data creation property list identifier +! OUTPUTS +! +! layout - type of storage layout for raw data +! possible values are: +! H5D_COMPACT_F +! H5D_CONTIGUOUS_F +! H5D_CHUNKED_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_layout_f (prp_id, layout, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: layout ! Type of storage layout for raw data + ! possible values are: + ! H5D_COMPACT_F(0) + ! H5D_CONTIGUOUS_F(1) + ! H5D_CHUNKED_F(2) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_layout_c(prp_id, layout) & + BIND(C,NAME='h5pget_layout_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: layout + END FUNCTION h5pget_layout_c + END INTERFACE + + hdferr = h5pget_layout_c(prp_id, layout) + END SUBROUTINE h5pget_layout_f + +!****s* H5P/h5pset_filter_f +! NAME +! h5pset_filter_f +! +! PURPOSE +! Adds a filter to the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be added to the pipeline +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! February, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter ! Filter to be added to the pipeline. + INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values. + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) & + BIND(C,NAME='h5pset_filter_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + END FUNCTION h5pset_filter_c + END INTERFACE + + hdferr = h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) + END SUBROUTINE h5pset_filter_f + +!****s* H5P/h5pget_nfilters_f +! NAME +! h5pget_nfilters_f +! +! PURPOSE +! Returns the number of filters in the pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! OUTPUTS +! +! nfilters - number of filters in the pipeline +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nfilters_f (prp_id, nfilters, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: nfilters ! The number of filters in the pipeline + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_nfilters_c(prp_id, nfilters) & + BIND(C,NAME='h5pget_nfilters_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: nfilters + END FUNCTION h5pget_nfilters_c + END INTERFACE + + hdferr = h5pget_nfilters_c(prp_id, nfilters) + END SUBROUTINE h5pget_nfilters_f + +!****s* H5P/h5pget_filter_f +! NAME +! h5pget_filter_f +! +! PURPOSE +! Returns information about a filter in a pipeline +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter_number - sequence number within the filter +! pipeline of the filter for which +! information is sought +! OUTPUTS +! +! filter_id - filter identification number +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! namelen - number of characters in the name buffer +! name - buffer to retrieve filter name +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_filter_f(prp_id, filter_number, flags, cd_nelmts, cd_values, namelen, name, filter_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter_number ! Sequence number within the filter + ! pipeline of the filter for which + ! information is sought + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. + INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter + INTEGER, INTENT(OUT) :: filter_id ! Filter identification number + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + +! INTEGER, EXTERNAL :: h5pget_filter_c +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & + cd_values, namelen, name, filter_id ) & + BIND(C,NAME='h5pget_filter_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter_number + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values + INTEGER, INTENT(OUT) :: flags + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts + INTEGER(SIZE_T), INTENT(IN) :: namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + INTEGER, INTENT(OUT) :: filter_id + END FUNCTION h5pget_filter_c + END INTERFACE + + hdferr = h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & + cd_values, namelen, name, filter_id ) + END SUBROUTINE h5pget_filter_f + +!****s* H5P/h5pset_external_f +! NAME +! h5pset_external_f +! +! PURPOSE +! Adds an external file to the list of external files. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! name - name of external file +! offset - offset in bytes from the beginning of the +! file to the location in the file +! where the data starts +! bytes - size of the external file data. +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5pset_external_f(prp_id, name, offset, bytes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an external file + INTEGER(OFF_T), INTENT(IN) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file + ! where the data starts. + INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the + ! file for the data + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5pset_external_c(prp_id, name,namelen, offset, bytes) & + BIND(C,NAME='h5pset_external_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, OFF_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(OFF_T), INTENT(IN) :: offset + INTEGER(HSIZE_T), INTENT(IN) :: bytes + END FUNCTION h5pset_external_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5pset_external_c(prp_id, name, namelen, offset, bytes) + END SUBROUTINE h5pset_external_f + +!****s* H5P/h5pget_external_count_f +! NAME +! h5pget_external_count_f +! +! PURPOSE +! Returns the number of external files for a dataset. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! +! count - number of external files for the +! specified dataset +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_external_count_f (prp_id, count, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: count ! Number of external files for the + ! Specified dataset + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_external_count_c(prp_id, count) & + BIND(C,NAME='h5pget_external_count_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: count + END FUNCTION h5pget_external_count_c + END INTERFACE + + hdferr = h5pget_external_count_c(prp_id, count) + END SUBROUTINE h5pget_external_count_f + +!****s* H5P/h5pget_external_f +! NAME +! h5pget_external_f +! +! PURPOSE +! Returns information about an external file. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! +! idx - external file index +! name_size - maximum size of name array +! name - name of the external file +! name - name of external file +! offset - offset in bytes from the beginning of the +! file to the location in the file +! where the data starts +! bytes - size of the external file data +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 +! +! Fortran90 Interface: + SUBROUTINE h5pget_external_f(prp_id, idx, name_size, name, offset,bytes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: idx ! External file index. + INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of an external file + INTEGER(OFF_T), INTENT(OUT) :: offset ! Offset, in bytes, from the beginning + ! of the file to the location in the file + ! where the data starts. + INTEGER(HSIZE_T), INTENT(OUT) :: bytes ! Number of bytes reserved in the + ! file for the data + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) & + BIND(C,NAME='h5pget_external_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T, OFF_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: idx + INTEGER(SIZE_T), INTENT(IN) :: name_size + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + INTEGER(OFF_T), INTENT(OUT) :: offset + INTEGER(HSIZE_T), INTENT(OUT) :: bytes + END FUNCTION h5pget_external_c + END INTERFACE + + hdferr = h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) + END SUBROUTINE h5pget_external_f + +!****s* H5P/h5pset_btree_ratios_f +! NAME +! h5pset_btree_ratios_f +! +! PURPOSE +! Sets B-tree split ratios for a dataset transfer +! property list. +! +! INPUTS +! +! prp_id - the dataset transfer property list +! identifier +! left - the B-tree split ratio for left-most nodes +! middle - the B-tree split ratio for all other nodes +! right - the B-tree split ratio for right-most nodes +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pset_btree_ratios_f(prp_id, left, middle, right, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + REAL, INTENT(IN) :: left ! The B-tree split ratio for left-most nodes. + REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(IN) :: right ! The B-tree split ratio for right-most + ! nodes and lone nodes. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_btree_ratios_c(prp_id, left, middle, right) & + BIND(C,NAME='h5pset_btree_ratios_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + REAL, INTENT(IN) :: left + REAL, INTENT(IN) :: middle + REAL, INTENT(IN) :: right + END FUNCTION h5pset_btree_ratios_c + END INTERFACE + + hdferr = h5pset_btree_ratios_c(prp_id, left, middle, right) + END SUBROUTINE h5pset_btree_ratios_f + +!****s* H5P/h5pget_btree_ratios_f +! NAME +! h5pget_btree_ratios_f +! +! PURPOSE +! Gets B-tree split ratios for a dataset transfer property list +! +! INPUTS +! +! prp_id - the dataset transfer property list +! identifier +! OUTPUTS +! +! left - the B-tree split ratio for left-most nodes +! middle - the B-tree split ratio for all other nodes +! right - the B-tree split ratio for right-most nodes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Fortran90 Interface: + SUBROUTINE h5pget_btree_ratios_f(prp_id, left, middle, right, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + REAL, INTENT(OUT) :: left ! The B-tree split ratio for left-most nodes. + REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes + REAL, INTENT(OUT) :: right ! The B-tree split ratio for right-most + ! nodes and lone nodes. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_btree_ratios_c(prp_id, left, middle, right) & + BIND(C,NAME='h5pget_btree_ratios_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + REAL, INTENT(OUT) :: left + REAL, INTENT(OUT) :: middle + REAL, INTENT(OUT) :: right + END FUNCTION h5pget_btree_ratios_c + END INTERFACE + + hdferr = h5pget_btree_ratios_c(prp_id, left, middle, right) + END SUBROUTINE h5pget_btree_ratios_f + +!****s* H5P/h5pget_fclose_degree_f +! NAME +! h5pget_fclose_degree_f +! +! PURPOSE +! Returns the degree for the file close behavior. +! +! INPUTS +! +! fapl_id - File access property list identifier +! OUTPUTS +! +! degree - Possible values are: +! H5F_CLOSE_DEFAULT_F +! H5F_CLOSE_WEAK_F +! H5F_CLOSE_SEMI_F +! H5F_CLOSE_STRONG_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! September 26, 2002 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_fclose_degree_f(fapl_id, degree, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(OUT) :: degree ! Possible values are: + ! H5F_CLOSE_DEFAULT_F + ! H5F_CLOSE_WEAK_F + ! H5F_CLOSE_SEMI_F + ! H5F_CLOSE_STRONG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_fclose_degree_c(fapl_id, degree) & + BIND(C,NAME='h5pget_fclose_degree_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(OUT) :: degree + END FUNCTION h5pget_fclose_degree_c + END INTERFACE + + hdferr = h5pget_fclose_degree_c(fapl_id, degree) + END SUBROUTINE h5pget_fclose_degree_f + +!****s* H5P/h5pset_fclose_degree_f +! NAME +! h5pset_fclose_degree_f +! +! PURPOSE +! Sets the degree for the file close behavior. +! +! INPUTS +! +! fapl_id - file access property list identifier +! degree - Possible values are: +! H5F_CLOSE_DEFAULT_F +! H5F_CLOSE_WEAK_F +! H5F_CLOSE_SEMI_F +! H5F_CLOSE_STRONG_F +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! September 26, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fclose_degree_f(fapl_id, degree, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier + INTEGER, INTENT(IN) :: degree ! Possible values are: + ! H5F_CLOSE_DEFAULT_F + ! H5F_CLOSE_WEAK_F + ! H5F_CLOSE_SEMI_F + ! H5F_CLOSE_STRONG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fclose_degree_c(fapl_id, degree) & + BIND(C,NAME='h5pset_fclose_degree_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(IN) :: degree + END FUNCTION h5pset_fclose_degree_c + END INTERFACE + + hdferr = h5pset_fclose_degree_c(fapl_id, degree) + END SUBROUTINE h5pset_fclose_degree_f + +!****s* H5P/h5pequal_f +! NAME +! h5pequal_f +! +! PURPOSE +! Checks if two property lists are eqaul +! +! INPUTS +! +! plist1_id - property list identifier +! plist2_id - property list identifier +! OUTPUTS +! +! flag - flag, possible values +! .TRUE. or .FALSE. +! hdferr: - error code +! Success: 0 +! Failure: -1, flag is set to .FALSE. +! +! AUTHOR +! Elena Pourmal +! September 30, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pequal_f(plist1_id, plist2_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier + LOGICAL, INTENT(OUT) :: flag ! Flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: c_flag + + INTERFACE + INTEGER FUNCTION h5pequal_c(plist1_id, plist2_id, c_flag) & + BIND(C,NAME='h5pequal_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist1_id + INTEGER(HID_T), INTENT(IN) :: plist2_id + INTEGER, INTENT(OUT) :: c_flag + END FUNCTION h5pequal_c + END INTERFACE + + flag = .FALSE. + hdferr = h5pequal_c(plist1_id, plist2_id, c_flag) + IF (c_flag .GT. 0) flag = .TRUE. + END SUBROUTINE h5pequal_f + +!****s* H5P/h5pset_buffer_f +! NAME +! h5pset_buffer_f +! +! PURPOSE +! Sets sixe for conversion buffer +! +! INPUTS +! plist_id - data transfer property list identifier +! size - buffer size +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 2, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_buffer_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by + ! the library. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_buffer_c(plist_id, size) & + BIND(C,NAME='h5pset_buffer_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_buffer_c + END INTERFACE + + hdferr = h5pset_buffer_c(plist_id, size) + END SUBROUTINE h5pset_buffer_f + +!****s* H5P/h5pget_buffer_f +! NAME +! h5pget_buffer_f +! +! PURPOSE +! Gets size for conversion buffer +! +! INPUTS +! +! plist_id - data transfer property list identifier +! OUTPUTS +! +! size - buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 2, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_buffer_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Buffer size in bytes; + ! buffer is allocated and freed by + ! the library. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_buffer_c(plist_id, size) & + BIND(C,NAME='h5pget_buffer_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_buffer_c + END INTERFACE + + hdferr = h5pget_buffer_c(plist_id, size) + END SUBROUTINE h5pget_buffer_f + +!****s* H5P/h5pfill_value_defined_f +! NAME +! h5pfill_value_defined_f +! +! PURPOSE +! Check if fill value is defined. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! flag - fill value status flag +! Possible values are: +! H5D_FILL_VALUE_ERROR_F +! H5D_FILL_VALUE_UNDEFINED_F +! H5D_FILL_VALUE_DEFAULT_F +! H5D_FILL_VALUE_USER_DEFINED_F +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pfill_value_defined_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Fill value status flag + ! H5D_FILL_VALUE_ERROR_F + ! H5D_FILL_VALUE_UNDEFINED_F + ! H5D_FILL_VALUE_DEFAULT_F + ! H5D_FILL_VALUE_USER_DEFINED_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pfill_value_defined_c(plist_id, flag) & + BIND(C,NAME='h5pfill_value_defined_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pfill_value_defined_c + END INTERFACE + + hdferr = h5pfill_value_defined_c(plist_id, flag) + END SUBROUTINE h5pfill_value_defined_f + +!****s* H5P/h5pset_alloc_time_f +! NAME +! h5pset_alloc_time_f +! +! PURPOSE +! Set space allocation time for dataset during creation. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! flag - allocation time flag: +! H5D_ALLOC_TIME_ERROR_F +! H5D_ALLOC_TIME_DEFAULT_F +! H5D_ALLOC_TIME_EARLY_F +! H5D_ALLOC_TIME_LATE_F +! H5D_ALLOC_TIME_INCR_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_alloc_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(IN) :: flag ! Allocation time flag: + ! H5D_ALLOC_TIME_ERROR_F + ! H5D_ALLOC_TIME_DEFAULT_F + ! H5D_ALLOC_TIME_EARLY_F + ! H5D_ALLOC_TIME_LATE_F + ! H5D_ALLOC_TIME_INCR_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_alloc_time_c(plist_id, flag) & + BIND(C,NAME='h5pset_alloc_time_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_alloc_time_c + END INTERFACE + + hdferr = h5pset_alloc_time_c(plist_id, flag) + END SUBROUTINE h5pset_alloc_time_f + +!****s* H5P/h5pget_alloc_time_f +! NAME +! h5pget_alloc_time_f +! +! PURPOSE +! Get space allocation time for dataset during creation. +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! flag - allocation time flag: +! H5D_ALLOC_TIME_ERROR_F +! H5D_ALLOC_TIME_DEFAULT_F +! H5D_ALLOC_TIME_EARLY_F +! H5D_ALLOC_TIME_LATE_F +! H5D_ALLOC_TIME_INCR_F +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_alloc_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Allocation time flag: + ! H5D_ALLOC_TIME_ERROR_F + ! H5D_ALLOC_TIME_DEFAULT_F + ! H5D_ALLOC_TIME_EARLY_F + ! H5D_ALLOC_TIME_LATE_F + ! H5D_ALLOC_TIME_INCR_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_alloc_time_c(plist_id, flag) & + BIND(C,NAME='h5pget_alloc_time_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_alloc_time_c + END INTERFACE + + hdferr = h5pget_alloc_time_c(plist_id, flag) + END SUBROUTINE h5pget_alloc_time_f + +!****s* H5P/h5pset_fill_time_f +! NAME +! h5pset_fill_time_f +! +! PURPOSE +! Set fill value writing time for dataset +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! flag - fill time flag: +! H5D_FILL_TIME_ERROR_F +! H5D_FILL_TIME_ALLOC_F +! H5D_FILL_TIME_NEVER_F +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fill_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(IN) :: flag ! Fill time flag: + ! H5D_FILL_TIME_ERROR_F + ! H5D_FILL_TIME_ALLOC_F + ! H5D_FILL_TIME_NEVER_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_fill_time_c(plist_id, flag) & + BIND(C,NAME='h5pset_fill_time_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fill_time_c + END INTERFACE + + hdferr = h5pset_fill_time_c(plist_id, flag) + END SUBROUTINE h5pset_fill_time_f + +!****s* H5P/h5pget_fill_time_f +! NAME +! h5pget_fill_time_f +! +! PURPOSE +! Get fill value writing time for dataset +! +! INPUTS +! +! plist_id - dataset creation property list identifier +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! OPTIONAL PARAMETERS +! +! flag - fill time flag: +! H5D_FILL_TIME_ERROR_F +! H5D_FILL_TIME_ALLOC_F +! H5D_FILL_TIME_NEVER_F +! AUTHOR +! Elena Pourmal +! October 4, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fill_time_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier + INTEGER, INTENT(OUT) :: flag ! Fill time flag: + ! H5D_FILL_TIME_ERROR_F + ! H5D_FILL_TIME_ALLOC_F + ! H5D_FILL_TIME_NEVER_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pget_fill_time_c(plist_id, flag) & + BIND(C,NAME='h5pget_fill_time_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_fill_time_c + END INTERFACE + + hdferr = h5pget_fill_time_c(plist_id, flag) + END SUBROUTINE h5pget_fill_time_f + +!****s* H5P/ h5pset_meta_block_size_f +! NAME +! h5pset_meta_block_size_f +! +! PURPOSE +! Sets the minimum size of metadata block allocations +! +! INPUTS +! +! plist_id - file access property list identifier +! size - metatdata block size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_meta_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Block size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_meta_block_size_c(plist_id, size) & + BIND(C,NAME='h5pset_meta_block_size_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_meta_block_size_c + END INTERFACE + + hdferr = h5pset_meta_block_size_c(plist_id, size) + END SUBROUTINE h5pset_meta_block_size_f + +!****s* H5P/h5pget_meta_block_size_f +! NAME +! h5pget_meta_block_size_f +! +! PURPOSE +! Gets the minimum size of metadata block allocations +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - metatdata block size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_meta_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Block size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_meta_block_size_c(plist_id, size) & + BIND(C,NAME='h5pget_meta_block_size_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_meta_block_size_c + END INTERFACE + + hdferr = h5pget_meta_block_size_c(plist_id, size) + END SUBROUTINE h5pget_meta_block_size_f + +!****s* H5P/h5pset_sieve_buf_size_f +! NAME +! h5pset_sieve_buf_size_f +! +! PURPOSE +! Sets the maximum size of the data sieve buffer +! +! INPUTS +! +! plist_id - file access property list identifier +! size - sieve buffer size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_sieve_buf_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size in bytes; + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_sieve_buf_size_c(plist_id, size) & + BIND(C,NAME='h5pset_sieve_buf_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_sieve_buf_size_c + END INTERFACE + + hdferr = h5pset_sieve_buf_size_c(plist_id, size) + END SUBROUTINE h5pset_sieve_buf_size_f + +!****s* H5P/h5pget_sieve_buf_size_f +! NAME +! h5pget_sieve_buf_size_f +! +! PURPOSE +! Gets the maximum size of the data sieve buffer +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - sieve buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_sieve_buf_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Buffer size in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_sieve_buf_size_c(plist_id, size) & + BIND(C,NAME='h5pget_sieve_buf_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_sieve_buf_size_c + END INTERFACE + + hdferr = h5pget_sieve_buf_size_c(plist_id, size) + END SUBROUTINE h5pget_sieve_buf_size_f + +!****s* H5P/h5pset_small_data_block_size_f +! NAME +! h5pset_small_data_block_size_f +! +! PURPOSE +! Sets the minimum size of "small" raw data block +! +! INPUTS +! +! plist_id - file access property list identifier +! size - small raw data block size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_small_data_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: size ! Small raw data block size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_small_data_block_size_c(plist_id, size) & + BIND(C,NAME='h5pset_small_data_block_size_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_small_data_block_size_c + END INTERFACE + + hdferr = h5pset_small_data_block_size_c(plist_id, size) + END SUBROUTINE h5pset_small_data_block_size_f + +!****s* H5P/h5pget_small_data_block_size_f +! NAME +! h5pget_small_data_block_size_f +! +! PURPOSE +! Gets the minimum size of "small" raw data block +! +! INPUTS +! +! plist_id - file access property list identifier +! OUTPUTS +! +! size - small raw data block size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_small_data_block_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier + INTEGER(HSIZE_T), INTENT(OUT) :: size ! Small raw data block size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_small_data_block_size_c(plist_id, size) & + BIND(C,NAME='h5pget_small_data_block_size_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(HSIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_small_data_block_size_c + END INTERFACE + + hdferr = h5pget_small_data_block_size_c(plist_id, size) + END SUBROUTINE h5pget_small_data_block_size_f + +!****s* H5P/h5pset_hyper_vector_size_f +! NAME +! h5pset_hyper_vector_size_f +! +! PURPOSE +! Set the number of "I/O" vectors (vector size) +! +! INPUTS +! +! plist_id - dataset transfer property list identifier +! size - vector size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pset_hyper_vector_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Vector size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_hyper_vector_size_c(plist_id, size) & + BIND(C,NAME='h5pset_hyper_vector_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(IN) :: size + END FUNCTION h5pset_hyper_vector_size_c + END INTERFACE + + hdferr = h5pset_hyper_vector_size_c(plist_id, size) + END SUBROUTINE h5pset_hyper_vector_size_f + +!****s* H5P/ h5pget_hyper_vector_size_f +! NAME +! h5pget_hyper_vector_size_f +! +! PURPOSE +! Get the number of "I/O" vectors (vector size) +! +! INPUTS +! +! plist_id - dataset transfer property list identifier +! OUTPUTS +! +! size - vector size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_hyper_vector_size_f(plist_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Vector size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_hyper_vector_size_c(plist_id, size) & + BIND(C,NAME='h5pget_hyper_vector_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_hyper_vector_size_c + END INTERFACE + + hdferr = h5pget_hyper_vector_size_c(plist_id, size) + END SUBROUTINE h5pget_hyper_vector_size_f + +!****s* H5P/h5pexist_f +! NAME +! h5pexist_f +! +! PURPOSE +! Queries whether a property name exists in a property list or class. +! +! INPUTS +! +! prp_id - property list identifier to query +! name - name of property to check for +! OUTPUTS +! +! flag - logical flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pexist_f(prp_id, name, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + LOGICAL, INTENT(OUT) :: flag ! .TRUE. if exists, .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pexist_c(prp_id, name, name_len) & + BIND(C,NAME='h5pexist_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pexist_c + END INTERFACE + flag = .FALSE. + name_len = LEN(name) + hdferr = h5pexist_c(prp_id, name , name_len) + IF (hdferr > 0) THEN + flag = .TRUE. + hdferr = 0 + ENDIF + END SUBROUTINE h5pexist_f + +!****s* H5P/h5pget_size_f +! +! NAME +! h5pget_size_f +! +! PURPOSE +! Queries the size of a property value in bytes. +! +! INPUTS +! +! prp_id - property list identifier to query +! name - name of property to query +! OUTPUTS +! +! size - size of property in bytes +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_size_f(prp_id, name, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to query + INTEGER(SIZE_T), INTENT(OUT) :: size ! Size in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pget_size_c(prp_id, name, name_len, size) & + BIND(C,NAME='h5pget_size_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5pget_size_c + END INTERFACE + name_len = LEN(name) + hdferr = h5pget_size_c(prp_id, name , name_len, size) + END SUBROUTINE h5pget_size_f + +!****s* H5P/h5pget_npros_f +! NAME +! h5pget_npros_f +! +! PURPOSE +! Queries number of properties in property list or class +! +! INPUTS +! +! prp_id - iproperty list identifier to query +! OUTPUTS +! +! nprops - number of properties in property object +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nprops_f(prp_id, nprops, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: nprops ! Number of properties + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_nprops_c(prp_id, nprops) & + BIND(C,NAME='h5pget_nprops_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(SIZE_T), INTENT(OUT) :: nprops + END FUNCTION h5pget_nprops_c + END INTERFACE + hdferr = h5pget_nprops_c(prp_id, nprops) + END SUBROUTINE h5pget_nprops_f + +!****s* H5P/h5pget_class_name_f +! NAME +! h5pget_class_name_f +! +! PURPOSE +! Queries the name of a class. +! +! INPUTS +! +! prp_id - property list identifier to query +! OUTPUTS +! +! name - name of a class +! size - Actual length of the class name +! NOTE: If provided buffer "name" is smaller, +! than name will be truncated to fit into +! provided user buffer. +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! HISTORY +! Returned the size of name as an argument +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_name_f(prp_id, name, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer to retireve class name + INTEGER, INTENT(OUT) :: size ! Actual length of the class name + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pget_class_name_c(prp_id, name, name_len) & + BIND(C,NAME='h5pget_class_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(INOUT) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pget_class_name_c + END INTERFACE + + name_len = LEN(name) + size = h5pget_class_name_c(prp_id, name, name_len) + + hdferr = 0 + IF(size.LT.0) hdferr = -1 + + END SUBROUTINE h5pget_class_name_f + +!****s* H5P/h5pget_class_parent_f +! NAME +! h5pget_class_parent_f +! +! PURPOSE +! Retrieves the parent class of a genric property class. +! +! INPUTS +! +! prp_id - property list identifier to query +! OUTPUTS +! +! parent_id - identifier of the parent class +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pget_class_parent_f(prp_id, parent_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list + ! identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_class_parent_c(prp_id, parent_id) & + BIND(C,NAME='h5pget_class_parent_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HID_T), INTENT(OUT) :: parent_id + END FUNCTION h5pget_class_parent_c + END INTERFACE + hdferr = h5pget_class_parent_c(prp_id, parent_id) + END SUBROUTINE h5pget_class_parent_f + +!****s* H5P/h5pisa_class_f +! NAME +! h5pisa_class_f +! +! PURPOSE +! Determines whether a property list is a member of a class. +! +! INPUTS +! +! plist - property list identifier +! pclass - identifier of the property class +! OUTPUTS +! +! flag - .TRUE. if a member, .FALSE. otherwise +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pisa_class_f(plist, pclass, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: pclass ! Class identifier + LOGICAL, INTENT(OUT) :: flag ! logical flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pisa_class_c(plist, pclass) & + BIND(C,NAME='h5pisa_class_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist + INTEGER(HID_T), INTENT(IN) :: pclass + END FUNCTION h5pisa_class_c + END INTERFACE + flag = .FALSE. + hdferr = h5pisa_class_c(plist, pclass) + IF (hdferr .GT. 0) THEN + flag = .TRUE. + hdferr = 0 + ENDIF + END SUBROUTINE h5pisa_class_f + +!****s* H5P/h5pcopy_prop_f +! NAME +! h5pcopy_prop_f +! +! PURPOSE +! Copies a property from one list or class to another. +! +! INPUTS +! +! dst_id - Identifier of the destination property list +! src_id - Identifier of the source property list +! name - name of the property to copy +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pcopy_prop_f(dst_id, src_id, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dst_id ! Destination property list + ! identifier + INTEGER(HID_T), INTENT(IN) :: src_id ! Source property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Property name + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5pcopy_prop_c(dst_id, src_id, name, name_len) & + BIND(C,NAME='h5pcopy_prop_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dst_id + INTEGER(HID_T), INTENT(IN) :: src_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5pcopy_prop_c + END INTERFACE + name_len = LEN(name) + hdferr = h5pcopy_prop_c(dst_id, src_id, name , name_len) + END SUBROUTINE h5pcopy_prop_f + +!****s* H5P/h5premove_f +! NAME +! h5premove_f +! +! PURPOSE +! Removes a property from a property list. + +! +! INPUTS +! +! plid - Property list identofoer +! name - name of the property to remove +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5premove_f(plid, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plid ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to remove + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5premove_c(plid, name, name_len) & + BIND(C,NAME='h5premove_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plid + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5premove_c + END INTERFACE + name_len = LEN(name) + hdferr = h5premove_c(plid, name , name_len) + END SUBROUTINE h5premove_f + +!****s* H5P/h5punregister_f +! NAME +! h5punregister_f +! +! PURPOSE +! Removes a property from a property list class. +! +! INPUTS +! +! class - Property list class identifier +! name - name of the property to remove +! OUTPUTS +! +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5punregister_f(class, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! property list class identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! name of property to remove + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: name_len + + INTERFACE + INTEGER FUNCTION h5punregister_c(class, name, name_len) & + BIND(C,NAME='h5punregister_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + END FUNCTION h5punregister_c + END INTERFACE + name_len = LEN(name) + hdferr = h5punregister_c(class, name , name_len) + END SUBROUTINE h5punregister_f + +!****s* H5P/h5pclose_class_f +! NAME +! h5pclose_class_f +! +! PURPOSE +! Closes an existing property list class. +! +! INPUTS +! +! class - Property list class identifier +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5pclose_class_f(class, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pclose_class_c(class) & + BIND(C,NAME='h5pclose_class_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class + END FUNCTION h5pclose_class_c + END INTERFACE + hdferr = h5pclose_class_c(class) + END SUBROUTINE h5pclose_class_f + +!****s* H5P/h5pset_shuffle_f +! NAME +! h5pset_shuffle_f +! +! PURPOSE +! Sets shuffling filter +! +! INPUTS +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shuffle_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_shuffle_c(prp_id) & + BIND(C,NAME='h5pset_shuffle_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_shuffle_c + END INTERFACE + hdferr = h5pset_shuffle_c(prp_id) + + END SUBROUTINE h5pset_shuffle_f + +!****s* H5P/h5pset_edc_check_f +! NAME +! h5pset_edc_check_f +! +! PURPOSE +! Enables/disables error detecting +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! flag - EDC flag; possible values: +! H5Z_DISABLE_EDC_F +! H5Z_ENABLE_EDC_F +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_edc_check_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: flag ! Checksum filter flag + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_edc_check_c(prp_id, flag) & + BIND(C,NAME='h5pset_edc_check_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_edc_check_c + END INTERFACE + hdferr = h5pset_edc_check_c(prp_id, flag) + + END SUBROUTINE h5pset_edc_check_f + +!****s* H5P/h5pget_edc_check_f +! NAME +! h5pget_edc_check_f +! +! PURPOSE +! Queries error detecting +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_edc_check_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier + INTEGER, INTENT(OUT) :: flag ! Checksum filter flag + ! May have one of the following values: + ! H5Z_ERROR_EDC_F + ! H5Z_DISABLE_EDC_F + ! H5Z_ENABLE_EDC_F + ! H5Z_NO_EDC_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_edc_check_c(prp_id, flag) & + BIND(C,NAME='h5pget_edc_check_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_edc_check_c + END INTERFACE + hdferr = h5pget_edc_check_c(prp_id, flag) + + END SUBROUTINE h5pget_edc_check_f + +!****s* H5P/h5pset_fletcher32_f +! NAME +! h5pset_fletcher32_f +! +! PURPOSE +! Sets Fletcher32 checksum of EDC for a dataset creation +! property list. +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 13, 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fletcher32_f(prp_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fletcher32_c(prp_id) & + BIND(C,NAME='h5pset_fletcher32_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + END FUNCTION h5pset_fletcher32_c + END INTERFACE + hdferr = h5pset_fletcher32_c(prp_id) + + END SUBROUTINE h5pset_fletcher32_f + +!****s* H5P/ h5pset_family_offset_f +! NAME +! h5pset_family_offset_f +! +! PURPOSE +! Sets offset for family file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! offset - file offset +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 19 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_family_offset_f(prp_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HSIZE_T), INTENT(IN) :: offset ! Offset in bytes + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_family_offset_c(prp_id, offset) & + BIND(C,NAME='h5pset_family_offset_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER(HSIZE_T), INTENT(IN) :: offset + END FUNCTION h5pset_family_offset_c + END INTERFACE + hdferr = h5pset_family_offset_c(prp_id, offset) + + END SUBROUTINE h5pset_family_offset_f + +!****s* H5P/h5pset_fapl_multi_l +! NAME +! h5pset_fapl_multi_l +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! mem_map - mapping array +! memb_fapl - property list for each memory usage type +! memb_name - names of member file +! relax - flag +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 20 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_multi_l(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, DIMENSION(*), INTENT(IN) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name + REAL, DIMENSION(*), INTENT(IN) :: memb_addr + LOGICAL, INTENT(IN) :: relax + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm + INTEGER :: maxlen + INTEGER :: flag = 0 + INTEGER :: i + + INTERFACE + INTEGER FUNCTION h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & + maxlen, memb_addr, flag) & + BIND(C,NAME='h5pset_fapl_multi_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(IN) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: memb_name + REAL, DIMENSION(*), INTENT(IN) :: memb_addr + INTEGER, DIMENSION(*) :: lenm + INTEGER :: maxlen + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fapl_multi_c + END INTERFACE + + maxlen = LEN(memb_name(1)) + DO i=1, H5FD_MEM_NTYPES_F + lenm(i) = LEN_TRIM(memb_name(i)) + ENDDO + IF(relax) flag = 1 + hdferr = h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag) + + END SUBROUTINE h5pset_fapl_multi_l +!****s* H5P/h5pset_fapl_multi_s +! NAME +! h5pset_fapl_multi_s +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! relax - flag +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! 31 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_fapl_multi_s(prp_id, relax, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + LOGICAL, INTENT(IN) :: relax + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: flag + + INTERFACE + INTEGER FUNCTION h5pset_fapl_multi_sc(prp_id,flag) & + BIND(C,NAME='h5pset_fapl_multi_sc') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, INTENT(IN) :: flag + END FUNCTION h5pset_fapl_multi_sc + END INTERFACE + flag = 0 + IF (relax) flag = 1 + hdferr = h5pset_fapl_multi_sc(prp_id, flag) + + END SUBROUTINE h5pset_fapl_multi_s +!****s* H5P/h5pget_fapl_multi_f +! NAME +! h5pget_fapl_multi_f +! +! PURPOSE +! Sets up use of the multi-file driver. +! +! INPUTS +! +! prp_id - file creation property list identifier +! OUTPUTS +! +! mem_map - mapping array +! memb_fapl - property list for each memory usage type +! memb_name - names of member file +! relax - flag +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! OPTIONAL PARAMETERS +! maxlen_out - maximum length for memb_name array element +! +! AUTHOR +! Elena Pourmal +! 24 March 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_multi_f(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr, maxlen_out) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl + CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name + REAL, DIMENSION(*), INTENT(OUT) :: memb_addr + INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out + LOGICAL, INTENT(OUT) :: relax + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm + INTEGER :: maxlen + INTEGER :: c_maxlen_out + INTEGER :: flag + INTEGER :: i +! + INTERFACE + INTEGER FUNCTION h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & + maxlen, memb_addr, flag, c_maxlen_out) & + BIND(C,NAME='h5pget_fapl_multi_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map + INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: memb_name + REAL, DIMENSION(*), INTENT(OUT) :: memb_addr + INTEGER, DIMENSION(*) :: lenm + INTEGER :: maxlen + INTEGER :: c_maxlen_out + INTEGER, INTENT(OUT) :: flag + END FUNCTION h5pget_fapl_multi_c + END INTERFACE + + maxlen = LEN(memb_name(1)) + DO i=1, H5FD_MEM_NTYPES_F + lenm(i) = LEN_TRIM(memb_name(i)) + ENDDO + hdferr = h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag, c_maxlen_out) + + relax = .TRUE. + IF(flag .EQ. 0) relax = .FALSE. + IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out + END SUBROUTINE h5pget_fapl_multi_f +!****s* H5P/h5pset_szip_f +! NAME +! h5pset_szip_f +! +! PURPOSE +! Sets up use of szip compression +! +! INPUTS +! +! prp_id - dataset creation property list identifier +! options_mask - A bit-mask conveying the desired SZIP options. +! Current valid values in Fortran are: +! H5_SZIP_EC_OM_F +! H5_SZIP_NN_OM_F +! pixels_per_block - szip parameters +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier + INTEGER, INTENT(IN) :: options_mask ! A bit-mask conveying the desired + ! SZIP options + ! Current valid values in Fortran are: + ! H5_SZIP_EC_OM_F + ! H5_SZIP_NN_OM_F + INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements + ! in each data block + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_szip_c(prp_id, options_mask, pixels_per_block) & + BIND(C,NAME='h5pset_szip_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier + INTEGER, INTENT(IN) :: options_mask + INTEGER, INTENT(IN) :: pixels_per_block + END FUNCTION h5pset_szip_c + END INTERFACE + hdferr = h5pset_szip_c(prp_id, options_mask, pixels_per_block) + + END SUBROUTINE h5pset_szip_f + +!****s* H5P/h5pall_filters_avail_f +! NAME +! h5pall_filters_avail_f +! +! PURPOSE +! Checks if all filters set in the dataset creation +! property list are available +! +! INPUTS +! +! prp_id - data creation property list identifier +! OUTPUTS +! +! flag - .TRUE. if all filters are available +! .FALSE. otherwise +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pall_filters_avail_f(prp_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(OUT) :: flag ! .TRUE. if all filters are available + ! .FALSE. otherwise + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status + + INTERFACE + INTEGER FUNCTION h5pall_filters_avail_c(prp_id, status) & + BIND(C,NAME='h5pall_filters_avail_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(OUT) :: status + END FUNCTION h5pall_filters_avail_c + END INTERFACE + flag = .TRUE. + hdferr = h5pall_filters_avail_c(prp_id, status) + IF (status .EQ. 0 ) flag = .FALSE. + + END SUBROUTINE h5pall_filters_avail_f + +!****s* H5P/h5pget_filter_by_id_f +! NAME +! h5pget_filter_by_id_f +! +! PURPOSE +! Returns information about a filter in a pipeline +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! OUTPUTS +! +! filter_id - filter identifier +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! namelen - number of characters in the name buffer +! name - buffer to retrieve filter name +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pget_filter_by_id_f(prp_id, filter_id, flags, cd_nelmts, cd_values, namelen, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter_id ! Filter identifier + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. + INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general + ! properties of the filter. + INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. + CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & + cd_values, namelen, name) & + BIND(C,NAME='h5pget_filter_by_id_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter_id + INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values + INTEGER, INTENT(OUT) :: flags + INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts + INTEGER(SIZE_T), INTENT(IN) :: namelen + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + END FUNCTION h5pget_filter_by_id_c + END INTERFACE + + hdferr = h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & + cd_values, namelen, name) + END SUBROUTINE h5pget_filter_by_id_f + +!****s* H5P/h5pmodify_filter_f +! NAME +! h5pmodify_filter_f +! +! PURPOSE +! Adds a filter to the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be modified +! flags - bit vector specifying certain general +! properties of the filter +! cd_nelmts - number of elements in cd_values +! cd_values - auxiliary data for the filter +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! April 10 2003 +! +! Fortran90 Interface: + SUBROUTINE h5pmodify_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: filter ! Filter to be modified + INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general + ! properties of the filter + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) & + BIND(C,NAME='h5pmodify_filter_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(IN) :: flags + INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts + INTEGER, DIMENSION(*), INTENT(IN) :: cd_values + END FUNCTION h5pmodify_filter_c + END INTERFACE + + hdferr = h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) + END SUBROUTINE h5pmodify_filter_f + +!****s* H5P/h5premove_filter_f +! NAME +! h5premove_filter_f +! +! PURPOSE +! Delete one or more filters from the filter pipeline. +! +! INPUTS +! +! prp_id - data creation or transfer property list +! identifier +! filter - filter to be removed +! OUTPUTS +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Quincey Koziol +! January 27 2004 +! +! Fortran90 Interface: + SUBROUTINE h5premove_filter_f(prp_id, filter, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property list + ! identifier + INTEGER, INTENT(IN) :: filter ! Filter to be removed + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5premove_filter_c(prp_id, filter) & + BIND(C,NAME='h5premove_filter_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER, INTENT(IN) :: filter + END FUNCTION h5premove_filter_c + END INTERFACE + + hdferr = h5premove_filter_c(prp_id, filter) + END SUBROUTINE h5premove_filter_f + +!****s* H5P/H5Pget_attr_phase_change_f +! NAME +! H5Pget_attr_phase_change_f +! +! PURPOSE +! Retrieves attribute storage phase change thresholds +! +! INPUTS +! +! ocpl_id - Object (dataset or group) creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! (Default: 8) +! min_dense - Minimum number of attributes to be stored in dense storage +! (Default: 6) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage + ! (Default: 8) + INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage + ! (Default: 6) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) & + BIND(C,NAME='h5pget_attr_phase_change_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(OUT) :: max_compact + INTEGER, INTENT(OUT) :: min_dense + + END FUNCTION h5pget_attr_phase_change_c + END INTERFACE + + hdferr = h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) + END SUBROUTINE h5pget_attr_phase_change_f + +!****s* H5P/H5Pset_attr_creation_order_f +! NAME +! H5Pset_attr_creation_order_f +! +! PURPOSE +! Sets tracking and indexing of attribute creation order +! +! INPUTS +! +! ocpl_id - Object creation property list identifier +! crt_order_flags - Flags specifying whether to track and index attribute creation order +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_attr_creation_order_f(ocpl_id, crt_order_flags , hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(IN) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) & + BIND(C,NAME='h5pset_attr_creation_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(IN) :: crt_order_flags + + END FUNCTION H5Pset_attr_creation_order_c + END INTERFACE + + hdferr = H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) + END SUBROUTINE h5pset_attr_creation_order_f + +!****s* H5P/H5Pset_shared_mesg_nindexes_f +! NAME +! H5Pset_shared_mesg_nindexes_f +! +! PURPOSE +! Sets number of shared object header message indexes +! +! INPUTS +! +! plist_id - file creation property list +! nindexes - Number of shared object header message indexes to be available in files created with this property list +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shared_mesg_nindexes_f( plist_id, nindexes, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list + INTEGER, INTENT(IN) :: nindexes ! Number of shared object header message indexes + ! available in files created WITH this property list + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_shared_mesg_nindexes_c(plist_id, nindexes) & + BIND(C,NAME='h5pset_shared_mesg_nindexes_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: nindexes + + END FUNCTION H5pset_shared_mesg_nindexes_c + END INTERFACE + + hdferr = h5pset_shared_mesg_nindexes_c(plist_id, nindexes) + + END SUBROUTINE h5pset_shared_mesg_nindexes_f + +!****s* H5P/H5Pset_shared_mesg_index_f +! NAME +! H5Pset_shared_mesg_index_f +! +! PURPOSE +! Configures the specified shared object header message index +! +! INPUTS +! +! fcpl_id - File creation property list identifier. +! index_num - Index being configured. +! mesg_type_flags - Types of messages that should be stored in this index. +! min_mesg_size - Minimum message size. +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_shared_mesg_index_f(fcpl_id, index_num, mesg_type_flags, min_mesg_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fcpl_id ! file creation property list + INTEGER, INTENT(IN) :: index_num ! Index being configured. + INTEGER, INTENT(IN) :: mesg_type_flags ! Types of messages that should be stored in this index. + INTEGER, INTENT(IN) :: min_mesg_size ! Minimum message size. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) & + BIND(C,NAME='h5pset_shared_mesg_index_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fcpl_id + INTEGER, INTENT(IN) :: index_num + INTEGER, INTENT(IN) :: mesg_type_flags + INTEGER, INTENT(IN) :: min_mesg_size + END FUNCTION H5pset_shared_mesg_index_c + END INTERFACE + + hdferr = h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) + + END SUBROUTINE h5pset_shared_mesg_index_f + +!****s* H5P/H5Pget_attr_creation_order_f +! NAME +! H5Pget_attr_creation_order_f +! +! PURPOSE +! Retrieves tracking and indexing settings for attribute creation order +! +! INPUTS +! +! ocpl_id - Object (group or dataset) creation property list identifier +! +! OUTPUTS +! +! crt_order_flags - Flags specifying whether to track and index attribute creation order +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_attr_creation_order_f(ocpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (group or dataset) creation property list identifier + INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) & + BIND(C,NAME='h5pget_attr_creation_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(OUT) :: crt_order_flags + END FUNCTION H5pget_attr_creation_order_c + END INTERFACE + + hdferr = h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) + + END SUBROUTINE h5pget_attr_creation_order_f + +!****s* H5P/H5Pset_libver_bounds_f +! NAME +! H5Pset_libver_bounds_f +! +! PURPOSE +! Sets bounds on library versions, and indirectly format versions, to be used when creating objects. +! +! INPUTS +! +! fapl_id - File access property list identifier +! low - The earliest version of the library that will be used for writing objects. +! high - The latest version of the library that will be used for writing objects. +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_libver_bounds_f(fapl_id, low, high, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER, INTENT(IN) :: low ! The earliest version of the library that will be used for writing objects. + ! Currently, low must be one of two pre-defined values: + ! HDF_LIBVER_EARLIEST_F + ! HDF_LIBVER_LATEST_F + INTEGER, INTENT(IN) :: high ! The latest version of the library that will be used for writing objects. + ! Currently, low must set to the pre-defined value: + ! HDF_LIBVER_LATEST_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_libver_bounds_c(fapl_id, low, high) & + BIND(C,NAME='h5pset_libver_bounds_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER, INTENT(IN) :: low + INTEGER, INTENT(IN) :: high + + END FUNCTION H5pset_libver_bounds_c + END INTERFACE + + hdferr = h5pset_libver_bounds_c(fapl_id, low, high) + + END SUBROUTINE h5pset_libver_bounds_f + +!****s* H5P/H5Pset_link_creation_order_f +! NAME +! H5Pset_link_creation_order_f +! +! PURPOSE +! Sets creation order tracking and indexing for links in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! crt_order_flags - Creation order flag(s) +! +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 18, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! File access property list identifier + INTEGER, INTENT(IN) :: crt_order_flags ! Creation order flag(s) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_link_creation_order_c(gcpl_id, crt_order_flags) & + BIND(C,NAME='h5pset_link_creation_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: crt_order_flags + + END FUNCTION H5pset_link_creation_order_c + END INTERFACE + + hdferr = h5pset_link_creation_order_c(gcpl_id, crt_order_flags) + + END SUBROUTINE h5pset_link_creation_order_f + +!****s* H5P/H5Pget_link_phase_change_f +! NAME +! H5Pget_link_phase_change_f +! +! PURPOSE +! Queries the settings for conversion between compact and dense groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! min_dense - Minimum number of attributes to be stored in dense storage +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 20, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage + INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) & + BIND(C,NAME='h5pget_link_phase_change_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: max_compact + INTEGER, INTENT(OUT) :: min_dense + + END FUNCTION h5pget_link_phase_change_c + END INTERFACE + + hdferr = h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) + END SUBROUTINE h5pget_link_phase_change_f + +!****s* H5P/H5Pget_obj_track_times_f +! NAME +! H5Pget_obj_track_times_f +! +! PURPOSE +! Returns whether times are tracked for an object. +! +! INPUTS +! +! plist_id - property list id +! flag - object timestamp setting +! .TRUE.,.FALSE. +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_obj_track_times_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(OUT) :: flag ! Object timestamp setting + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pget_obj_track_times_c(plist_id, status) & + BIND(C,NAME='h5pget_obj_track_times_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER, INTENT(OUT) :: status + END FUNCTION h5pget_obj_track_times_c + END INTERFACE + flag = .TRUE. + hdferr = h5pget_obj_track_times_c(plist_id, status) + IF(status.EQ.0) flag = .FALSE. + + END SUBROUTINE h5pget_obj_track_times_f + +!****s* H5P/H5Pset_obj_track_times_f +! NAME +! H5Pset_obj_track_times_f +! +! PURPOSE +! Set whether the birth, access, modification & change times for +! an object are stored. +! +! Birth time is the time the object was created. Access time is +! the last time that metadata or raw data was read from this +! object. Modification time is the last time the data for +! this object was changed (either writing raw data to a dataset +! or inserting/modifying/deleting a link in a group). Change +! time is the last time the metadata for this object was written +! (adding/modifying/deleting an attribute on an object, extending +! the size of a dataset, etc). +! +! If these times are not tracked, they will be reported as +! 12:00 AM UDT, Jan. 1, 1970 (i.e. 0 seconds past the UNIX +! epoch) when queried. +! +! INPUTS +! +! plist_id - property list id +! flag - object timestamp setting +! .TRUE.,.FALSE. +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_obj_track_times_f(plist_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property + ! list identifier + LOGICAL, INTENT(IN) :: flag ! Object timestamp setting + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: status +! +! MS FORTRAN needs explicit interface for C functions called here. +! + INTERFACE + INTEGER FUNCTION h5pset_obj_track_times_c(plist_id, status) & + BIND(C,NAME='h5pset_obj_track_times_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier + INTEGER, INTENT(IN) :: status + END FUNCTION h5pset_obj_track_times_c + END INTERFACE + + status = 0 + IF(flag) status = 1 + + hdferr = h5pset_obj_track_times_c(plist_id, status) + + END SUBROUTINE h5pset_obj_track_times_f + +!****s* H5P/H5Pset_create_inter_group_f +! NAME +! H5Pset_create_inter_group_f +! +! PURPOSE +! Specifies in property list whether to create missing intermediate groups. +! +! INPUTS +! +! lcpl_id - Link creation property list identifier +! crt_intermed_group - crt_intermed_group specifying whether +! to create intermediate groups upon the creation +! of an object +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! February 22, 2008 +! +! HISTORY +! The long subroutine name (>31) on older f90 compilers causes problems +! so had to shorten the name +! Fortran90 Interface: + SUBROUTINE h5pset_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier + INTEGER, INTENT(IN) :: crt_intermed_group ! specifying whether to create intermediate groups + ! upon the creation of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) & + BIND(C,NAME='h5pset_create_inter_group_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id + INTEGER, INTENT(IN) :: crt_intermed_group + END FUNCTION h5pset_create_inter_group_c + END INTERFACE + + hdferr = h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) + + END SUBROUTINE h5pset_create_inter_group_f + +!****s* H5P/H5Pget_link_creation_order_f +! NAME +! H5Pget_link_creation_order_f +! +! PURPOSE +! Queries whether link creation order is tracked and/or indexed in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! +! OUTPUTS +! +! crt_order_flags - Creation order flag(s) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: crt_order_flags ! Creation order flag(s) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_link_creation_order_c(gcpl_id, crt_order_flags) & + BIND(C,NAME='h5pget_link_creation_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: crt_order_flags + + END FUNCTION H5pget_link_creation_order_c + END INTERFACE + + hdferr = h5pget_link_creation_order_c(gcpl_id, crt_order_flags) + + END SUBROUTINE h5pget_link_creation_order_f + +!****s* H5P/H5Pset_char_encoding_f +! NAME +! H5Pset_char_encoding_f +! +! PURPOSE +! Sets the character encoding used to encode a string. +! +! INPUTS +! +! plist_id - Property list identifier +! encoding - Valid values for encoding are: +! H5T_CSET_ASCII_F -> US ASCII +! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding +! +! OUTPUTS +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_char_encoding_f(plist_id, encoding, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier + INTEGER, INTENT(IN) :: encoding ! String encoding character set: + ! H5T_CSET_ASCII_F -> US ASCII + ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_char_encoding_c(plist_id, encoding) & + BIND(C,NAME='h5pset_char_encoding_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: encoding + + END FUNCTION H5pset_char_encoding_c + END INTERFACE + + hdferr = h5pset_char_encoding_c(plist_id, encoding) + + END SUBROUTINE h5pset_char_encoding_f + +!****s* H5P/H5Pget_char_encoding_f +! NAME +! H5Pget_char_encoding_f +! +! PURPOSE +! Retrieves the character encoding used to create a string +! +! INPUTS +! +! plist_id - Property list identifier +! +! OUTPUTS +! +! encoding - Valid values for encoding are: +! H5T_CSET_ASCII_F -> US ASCII +! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_char_encoding_f(plist_id, encoding, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier + + INTEGER, INTENT(OUT) :: encoding ! Valid values for encoding are: + ! H5T_CSET_ASCII_F -> US ASCII + ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_char_encoding_c(plist_id, encoding) & + BIND(C,NAME='h5pget_char_encoding_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(OUT) :: encoding + + END FUNCTION H5pget_char_encoding_c + END INTERFACE + + hdferr = h5pget_char_encoding_c(plist_id, encoding) + + END SUBROUTINE h5pget_char_encoding_f + +!****s* H5P/h5pset_copy_object_f +! NAME +! h5pset_copy_object_f +! +! PURPOSE +! Sets properties to be used when an object is copied. +! +! INPUTS +! +! ocp_plist_id - Object copy property list identifier +! copy_options - Copy option(s) to be set +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_copy_object_f(ocp_plist_id, copy_options, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier + INTEGER, INTENT(IN) :: copy_options ! Copy option(s) to be set, valid options are: + ! H5O_COPY_SHALLOW_HIERARCHY_F + ! H5O_COPY_EXPAND_SOFT_LINK_F + ! H5O_COPY_EXPAND_EXT_LINK_F + ! H5O_COPY_EXPAND_REFERENCE_F + ! H5O_COPY_WITHOUT_ATTR_FLAG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_copy_object_c(ocp_plist_id, copy_options) & + BIND(C,NAME='h5pset_copy_object_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id + INTEGER, INTENT(IN) :: copy_options + END FUNCTION h5pset_copy_object_c + END INTERFACE + hdferr = h5pset_copy_object_c(ocp_plist_id, copy_options) + END SUBROUTINE h5pset_copy_object_f + +!****s* H5P/h5pget_copy_object_f +! NAME +! h5pget_copy_object_f +! +! PURPOSE +! Retrieves the properties to be used when an object is copied. +! +! INPUTS +! +! ocp_plist_id - Object copy property list identifier +! OUTPUTS +! +! copy_options - Copy option(s) to be get +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 3, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_copy_object_f(ocp_plist_id, copy_options, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier + INTEGER, INTENT(OUT) :: copy_options ! Valid copy options returned are: + ! H5O_COPY_SHALLOW_HIERARCHY_F + ! H5O_COPY_EXPAND_SOFT_LINK_F + ! H5O_COPY_EXPAND_EXT_LINK_F + ! H5O_COPY_EXPAND_REFERENCE_F + ! H5O_COPY_WITHOUT_ATTR_FLAG_F + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_copy_object_c(ocp_plist_id, copy_options) & + BIND(C,NAME='h5pget_copy_object_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocp_plist_id + INTEGER, INTENT(OUT) :: copy_options + END FUNCTION h5pget_copy_object_c + END INTERFACE + hdferr = h5pget_copy_object_c(ocp_plist_id, copy_options) + END SUBROUTINE h5pget_copy_object_f + +!****s* H5P/h5pget_data_transform_f +! NAME +! h5pget_data_transform_f +! +! PURPOSE +! Retrieves a data transform expression. +! +! INPUTS +! +! plist_id - Identifier of the property list or class +! OUTPUTS +! +! expression - buffer to hold transform expression +! hdferr - Error code +! Success: Actual lenght of the expression +! If provided buffer "expression" is +! smaller, than expression will be +! truncated to fit into +! provided user buffer +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 19, 2008 +! +! HISTORY +! +! Should hdferr return just 0 or 1 and add another arguement for the size? +! Fortran90 Interface: +SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class + CHARACTER(LEN=*), INTENT(OUT) :: expression ! Buffer to hold transform expression + INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: size ! Registered size of the transform expression + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: expression_len + INTEGER(SIZE_T) :: size_default + + INTERFACE + INTEGER FUNCTION h5pget_data_transform_c(plist_id, expression, expression_len, size_default) & + BIND(C,NAME='h5pget_data_transform_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: expression + INTEGER(SIZE_T) :: size_default + INTEGER :: expression_len + END FUNCTION h5pget_data_transform_c + END INTERFACE + + size_default = 0 + expression_len = LEN(expression) + + hdferr = h5pget_data_transform_c(plist_id, expression, expression_len, size_default) + + IF(present(size)) size = size_default + + END SUBROUTINE h5pget_data_transform_f + +!****s* H5P/h5pset_data_transform_f +! NAME +! h5pset_data_transform_f +! +! PURPOSE +! Sets a data transform expression. +! +! INPUTS +! +! plist_id - Identifier of the property list or class +! expression - Buffer to hold transform expression +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 19, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_data_transform_f(plist_id, expression, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class + CHARACTER(LEN=*), INTENT(IN) :: expression ! Buffer to hold transform expression + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTEGER :: expression_len + + INTERFACE + INTEGER FUNCTION h5pset_data_transform_c(plist_id, expression, expression_len) & + BIND(C,NAME='h5pset_data_transform_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: expression + INTEGER :: expression_len + END FUNCTION h5pset_data_transform_c + END INTERFACE + + expression_len = LEN(expression) + hdferr = h5pset_data_transform_c(plist_id, expression, expression_len) + + END SUBROUTINE h5pset_data_transform_f + +!****s* H5P/H5Pget_local_heap_size_hint_f +! NAME +! H5Pget_local_heap_size_hint_f +! +! PURPOSE +! Queries the local heap size hint for original-style groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! size_hint - Hint for size of local heap +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: size_hint ! Hint for size of local heap + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_local_heap_size_hint_c(gcpl_id, size_hint) & + BIND(C,NAME='h5pget_local_heap_size_hint_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(SIZE_T), INTENT(OUT) :: size_hint + END FUNCTION H5Pget_local_heap_size_hint_c + END INTERFACE + + hdferr = H5Pget_local_heap_size_hint_c(gcpl_id, size_hint) + + END SUBROUTINE h5pget_local_heap_size_hint_f + +!****s* H5P/H5Pget_est_link_info_f +! NAME +! H5Pget_est_link_info_f +! +! PURPOSE +! Queries data required to estimate required local heap or object header size. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! OUTPUTS +! +! est_num_entries - Estimated number of links to be inserted into group +! est_name_len - Estimated average length of link names +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pget_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(OUT) :: est_num_entries ! Estimated number of links to be inserted into group + INTEGER, INTENT(OUT) :: est_name_len ! Estimated average length of link names + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) & + BIND(C,NAME='h5pget_est_link_info_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(OUT) :: est_num_entries + INTEGER, INTENT(OUT) :: est_name_len + END FUNCTION h5pget_est_link_info_c + END INTERFACE + + hdferr = h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + + END SUBROUTINE h5pget_est_link_info_f + +!****s* H5P/H5Pset_local_heap_size_hint_f +! NAME +! H5Pset_local_heap_size_hint_f +! +! PURPOSE +! Sets the local heap size hint for original-style groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! size_hint - Hint for size of local heap +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER(SIZE_T), INTENT(IN) :: size_hint ! Hint for size of local heap + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_local_heap_size_hint_c(gcpl_id, size_hint) & + BIND(C,NAME='h5pset_local_heap_size_hint_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER(SIZE_T), INTENT(IN) :: size_hint + END FUNCTION h5pset_local_heap_size_hint_c + END INTERFACE + + hdferr = H5Pset_local_heap_size_hint_c(gcpl_id, size_hint) + + END SUBROUTINE h5pset_local_heap_size_hint_f + +!****s* H5P/h5pset_est_link_info_f +! NAME +! h5pset_est_link_info_f +! +! PURPOSE +! Sets estimated number of links and length of link names in a group. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! est_num_entries - Estimated number of links to be inserted into group +! est_name_len - Estimated average length of link names +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(IN) :: est_num_entries ! Estimated number of links to be inserted into group + INTEGER, INTENT(IN) :: est_name_len ! Estimated average length of link names + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) & + BIND(C,NAME='h5pset_est_link_info_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: est_num_entries + INTEGER, INTENT(IN) :: est_name_len + END FUNCTION h5pset_est_link_info_c + END INTERFACE + + hdferr = H5Pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) + + END SUBROUTINE h5pset_est_link_info_f + +!****s* H5P/h5pset_link_phase_change_f +! NAME +! h5pset_link_phase_change_f +! +! PURPOSE +! Sets the parameters for conversion between compact and dense groups. +! +! INPUTS +! +! gcpl_id - Group creation property list identifier +! max_compact - Maximum number of attributes to be stored in compact storage +! min_dense - Minimum number of attributes to be stored in dense storage +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier + INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage + INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) & + BIND(C,NAME='h5pset_link_phase_change_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: gcpl_id + INTEGER, INTENT(IN) :: max_compact + INTEGER, INTENT(IN) :: min_dense + END FUNCTION h5pset_link_phase_change_c + END INTERFACE + + hdferr = h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) + END SUBROUTINE h5pset_link_phase_change_f + +!****s* H5P/h5pset_fapl_direct_f +! NAME +! h5pset_fapl_direct_f +! +! PURPOSE +! Sets up use of the direct I/O driver. +! +! INPUTS +! +! fapl_id - File access property list identifier +! alignment - Required memory alignment boundary +! block_size - File system block size +! cbuf_size - Copy buffer size +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: alignment ! Required memory alignment boundary! + INTEGER(SIZE_T), INTENT(IN) :: block_size ! File system block size + INTEGER(SIZE_T), INTENT(IN) :: cbuf_size ! Copy buffer size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) & + BIND(C,NAME='h5pset_fapl_direct_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(SIZE_T), INTENT(IN) :: alignment + INTEGER(SIZE_T), INTENT(IN) :: block_size + INTEGER(SIZE_T), INTENT(IN) :: cbuf_size + END FUNCTION h5pset_fapl_direct_c + END INTERFACE + + hdferr = H5Pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + END SUBROUTINE h5pset_fapl_direct_f + +!****s* H5P/h5pget_fapl_direct_f +! NAME +! h5pget_fapl_direct_f +! +! PURPOSE +! Gets up use of the direct I/O driver. +! +! INPUTS +! +! fapl_id - File access property list identifier +! OUTPUTS +! +! alignment - Required memory alignment boundary +! block_size - File system block size +! cbuf_size - Copy buffer size +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: alignment ! Required memory alignment boundary! + INTEGER(SIZE_T), INTENT(OUT) :: block_size ! File system block size + INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size ! Copy buffer size + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) & + BIND(C,NAME='h5pget_fapl_direct_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: fapl_id + INTEGER(SIZE_T), INTENT(OUT) :: alignment + INTEGER(SIZE_T), INTENT(OUT) :: block_size + INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size + END FUNCTION h5pget_fapl_direct_c + END INTERFACE + + hdferr = H5Pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) + END SUBROUTINE h5pget_fapl_direct_f + +!****s* H5P/H5Pset_attr_phase_change_f +! NAME +! H5Pset_attr_phase_change_f +! +! PURPOSE +! Sets attribute storage phase change thresholds. +! +! INPUTS +! +! ocpl_id - Object (dataset or group) creation property list identifier +! OUTPUTS +! +! max_compact - Maximum number of attributes to be stored in compact storage +! (Default: 8) +! min_dense - Minimum number of attributes to be stored in dense storage +! (Default: 6) +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! January, 2008 +! +! Fortran90 Interface: +SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier + INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage + !(Default: 8) + INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage + ! (Default: 6) + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) & + BIND(C,NAME='h5pset_attr_phase_change_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: ocpl_id + INTEGER, INTENT(IN) :: max_compact + INTEGER, INTENT(IN) :: min_dense + + END FUNCTION h5pset_attr_phase_change_c + END INTERFACE + + hdferr = h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) + + + END SUBROUTINE h5pset_attr_phase_change_f + +!****s* H5P/H5Pset_nbit_f +! NAME +! H5Pset_nbit_f +! +! PURPOSE +! Sets up the use of the N-Bit filter. +! +! Inputs: +! plist_id - Dataset creation property list identifier. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_nbit_f(plist_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION H5Pset_nbit_c(plist_id) & + BIND(C,NAME='h5pset_nbit_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + END FUNCTION H5Pset_nbit_c + END INTERFACE + + hdferr = H5Pset_nbit_c(plist_id) + + END SUBROUTINE h5pset_nbit_f + +!****s* H5P/h5pset_scaleoffset_f +! NAME +! h5pset_scaleoffset_f +! +! PURPOSE +! Sets up the use of the scale-offset filter. +! +! Inputs: +! plist_id - Dataset creation property list identifier. +! scale_type - Flag indicating compression method. Valid values: +! H5Z_SO_FLOAT_DSCALE_F +! H5Z_SO_FLOAT_ESCALE_F +! H5Z_SO_INT_F +! +! scale_factor - Parameter related to scale. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! March 21, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pset_scaleoffset_f(plist_id, scale_type, scale_factor, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER , INTENT(IN) :: scale_type + INTEGER , INTENT(IN) :: scale_factor + INTEGER , INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5pset_scaleoffset_c(plist_id, scale_type, scale_factor) & + BIND(C,NAME='h5pset_scaleoffset_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist_id + INTEGER, INTENT(IN) :: scale_type + INTEGER, INTENT(IN) :: scale_factor + END FUNCTION h5pset_scaleoffset_c + END INTERFACE + + hdferr = H5Pset_scaleoffset_c(plist_id, scale_type, scale_factor) + + END SUBROUTINE h5pset_scaleoffset_f + +!****s* H5P/h5pset_nlinks_f +! NAME +! h5pset_nlinks_f +! +! PURPOSE +! Sets maximum number of soft or user-defined link traversals. +! +! INPUTS +! +! lapl_id - File access property list identifier +! nlinks - Maximum number of links to traverse +! +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 24, 2008 +! +! HISTORY +! +! +! Fortran90 Interface: + SUBROUTINE h5pset_nlinks_f(lapl_id, nlinks, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(IN) :: nlinks ! Maximum number of links to traverse + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pset_nlinks_c(lapl_id, nlinks) & + BIND(C,NAME='h5pset_nlinks_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id + INTEGER(SIZE_T), INTENT(IN) :: nlinks + END FUNCTION h5pset_nlinks_c + END INTERFACE + + hdferr = h5pset_nlinks_c(lapl_id, nlinks) + + END SUBROUTINE h5pset_nlinks_f + +!****s* H5P/h5pget_nlinks_f +! NAME +! h5pget_nlinks_f +! +! PURPOSE +! Gets maximum number of soft or user-defined link traversals. +! +! INPUTS +! +! lapl_id - File access property list identifier +! nlinks - Maximum number of links to traverse +! +! OUTPUTS +! +! hdferr - error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! March 24, 2008 +! +! Fortran90 Interface: + SUBROUTINE h5pget_nlinks_f(lapl_id, nlinks, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier + INTEGER(SIZE_T), INTENT(OUT) :: nlinks ! Maximum number of links to traverse + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_nlinks_c(lapl_id, nlinks) & + BIND(C,NAME='h5pget_nlinks_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lapl_id + INTEGER(SIZE_T), INTENT(OUT) :: nlinks + END FUNCTION h5pget_nlinks_c + END INTERFACE + + hdferr = h5pget_nlinks_c(lapl_id, nlinks) + + END SUBROUTINE h5pget_nlinks_f + +!****s* H5P/H5Pget_create_inter_group_f +! NAME +! H5Pget_create_inter_group_f +! +! PURPOSE +! Determines whether property is set to enable creating missing intermediate groups. +! +! INPUTS +! +! lcpl_id - Link creation property list identifier +! crt_intermed_group - Specifying whether to create intermediate groups upon +! the creation of an object +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 4, 2008 +! +! HISTORY +! +! The long subroutine name (>31) on older f90 compilers causes problems +! so the name was shortened +! Fortran90 Interface: + SUBROUTINE h5pget_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier + INTEGER, INTENT(IN) :: crt_intermed_group ! Flag specifying whether to create intermediate groups + ! upon creation of an object + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) & + BIND(C,NAME='h5pget_create_inter_group_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: lcpl_id + INTEGER, INTENT(IN) :: crt_intermed_group + END FUNCTION h5pget_create_inter_group_c + END INTERFACE + + hdferr = h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) + + END SUBROUTINE h5pget_create_inter_group_f + +!****s* H5P/H5Pset_chunk_cache_f +! NAME +! H5Pset_chunk_cache_f +! +! PURPOSE +! Set the number of objects in the meta data cache and the +! maximum number of chunks and bytes in the raw data chunk cache. +! Once set, these values will override the values in the file access +! property list. Each of these values can be individually unset +! (or not set at all) by passing the macros: +! H5D_CHUNK_CACHE_NSLOTS_DFLT_F, +! H5D_CHUNK_CACHE_NBYTES_DFLT_F, and/or +! H5D_CHUNK_CACHE_W0_DFLT_F +! as appropriate. +! +! The RDCC_W0 value should be between 0 and 1 inclusive and +! indicates how much chunks that have been fully read or fully +! written are favored for preemption. A value of zero means +! fully read or written chunks are treated no differently than +! other chunks (the preemption is strictly LRU) while a value +! of one means fully read chunks are always preempted before +! other chunks. +! +! INPUTS +! +! dapl_id - Dataset access property list identifier. +! rdcc_nslots - The number of chunk slots in the raw data chunk cache for this dataset. +! rdcc_nbytes - The total size of the raw data chunk cache for this dataset. +! rdcc_w0 - The chunk preemption policy for this dataset. +! OUTPUTS +! +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! +! HISTORY +! +! Fortran90 Interface: + SUBROUTINE h5pset_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data + ! chunk cache for this dataset. + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache + ! for this dataset. + REAL, INTENT(IN) :: rdcc_w0 ! The chunk preemption policy for this dataset. + INTEGER, INTENT(OUT) :: hdferr ! Error code + ! 0 on success and -1 on failure +!***** + + INTERFACE + INTEGER FUNCTION h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) & + BIND(C,NAME='h5pset_chunk_cache_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots + INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes + REAL, INTENT(IN) :: rdcc_w0 + END FUNCTION h5pset_chunk_cache_c + END INTERFACE + + hdferr = h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + + END SUBROUTINE h5pset_chunk_cache_f + +!****s* H5P/H5Pget_chunk_cache_f +! NAME +! H5Pget_chunk_cache_f +! +! PURPOSE +! Retrieves the maximum possible number of elements in the meta +! data cache and the maximum possible number of elements and +! bytes and the RDCC_W0 value in the raw data chunk cache. Any +! (or all) arguments may be null pointers in which case the +! corresponding datum is not returned. If these properties have +! not been set on this property list, the default values for a +! file access property list are returned. +! +! INPUTS +! +! dapl_id - Dataset access property list identifier. +! OUTPUTS +! +! rdcc_nslots - Number of chunk slots in the raw data chunk cache hash table. +! rdcc_nbytes - Total size of the raw data chunk cache, in bytes. +! rdcc_w0 - Preemption policy. +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! M. Scot Breitenfeld +! April 13, 2009 +! +! HISTORY +! +! Fortran90 Interface: + SUBROUTINE h5pget_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots ! Number of chunk slots in the raw data chunk cache hash table. + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. + REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy. + INTEGER, INTENT(OUT) :: hdferr ! Error code: + ! 0 on success and -1 on failure +!***** + INTERFACE + INTEGER FUNCTION h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) & + BIND(C,NAME='h5pget_chunk_cache_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dapl_id + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots + INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes + REAL, INTENT(OUT) :: rdcc_w0 + END FUNCTION h5pget_chunk_cache_c + END INTERFACE + + hdferr = h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) + + END SUBROUTINE h5pget_chunk_cache_f + +! +!****s* H5P (F03)/h5pset_fill_value_f_F90 +! +! NAME +! h5pset_fill_value_f +! +! PURPOSE +! Sets fill value for a dataset creation property list +! +! Inputs: +! prp_id - Property list identifier +! type_id - Datatype identifier of fill value datatype (in memory) +! fillvalue - Fillvalue +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Added the recommended way of passing fillvalue +! and that is by passing the C address, all other +! ways are obsolete and should be avoided. June, 2008 MSB +! +! NOTES +! h5pset(get)fill_value_f function is overloaded to support +! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. +! +! Fortran90 Interface: +!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) +!! IMPLICIT NONE +!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: type_id +!! TYPE(VOID) , INTENT(IN) :: fillvalue +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + + SUBROUTINE h5pset_fill_value_integer(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + INTEGER, INTENT(IN), TARGET :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + TYPE(C_PTR) :: f_ptr ! C address + + f_ptr = C_LOC(fillvalue) + + hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr) + + END SUBROUTINE h5pset_fill_value_integer +! +!****s* H5P (F03)/h5pget_fill_value_f_F90 +! +! NAME +! h5pget_fill_value_f +! +! PURPOSE +! Gets fill value for a dataset creation property list +! +! Inputs: +! prp_id - Property list identifier +! type_id - Datatype identifier of fill value datatype (in memory) +! +! Outputs: +! fillvalue - Fillvalue +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Added the recommended way of passing fillvalue +! and that is by passing the C address, all other +! ways are obsolete and should be avoided. June, 2008 MSB +! +! NOTES +! h5pget(get)fill_value_f function is overloaded to support +! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. +! +! Fortran90 Interface: +!! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) +!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: type_id +!! TYPE(VOID) , INTENT(OUT) :: fillvalue +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE h5pget_fill_value_integer(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + INTEGER, INTENT(OUT), TARGET :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + TYPE(C_PTR) :: f_ptr ! C address + + f_ptr = C_LOC(fillvalue) + + hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr) + + END SUBROUTINE h5pget_fill_value_integer + + SUBROUTINE h5pset_fill_value_char(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + CHARACTER, INTENT(IN), TARGET :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + TYPE(C_PTR) :: f_ptr ! C address + + f_ptr = C_LOC(fillvalue) + hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr) + + END SUBROUTINE h5pset_fill_value_char + + SUBROUTINE h5pget_fill_value_char(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + CHARACTER, INTENT(OUT) :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER :: i + CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr + INTEGER :: chr_len + + TYPE(C_PTR) :: f_ptr ! C address + ! To resolve Issue #1 outlined in the preamble of this file we + ! need to pack the character string into an array. + + chr_len = LEN(fillvalue) + ALLOCATE(chr(1:chr_len), STAT=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + + f_ptr = C_LOC(chr(1)(1:1)) + hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr) + + DO i = 1, chr_len + fillvalue(i:i) = chr(i) + ENDDO + DEALLOCATE(chr) + + END SUBROUTINE h5pget_fill_value_char +! +!****s* H5P (F03)/h5pset_fill_value_f_F03 +! +! NAME +! h5pset_fill_value_f +! +! PURPOSE +! Sets fill value for a dataset creation property list +! +! Inputs: +! prp_id - Property list identifier +! type_id - Datatype identifier of fill value datatype (in memory) +! fillvalue - Fillvalue +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Added the recommended way of passing fillvalue +! and that is by passing the C address, all other +! ways are obsolete and should be avoided. June, 2008 MSB +! +! NOTES +! h5pset(get)fill_value_f function is overloaded to support +! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. +! +! Fortran2003 Interface: +!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) +!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: type_id +!! TYPE(C_PTR) , INTENT(IN) :: fillvalue +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE h5pset_fill_value_ptr(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + TYPE(C_PTR), INTENT(IN) :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + + hdferr = h5pset_fill_value_c(prp_id, type_id, fillvalue) + + END SUBROUTINE h5pset_fill_value_ptr + +! +!****s* H5P (F03)/h5pget_fill_value_f_F03 +! +! NAME +! h5pget_fill_value_f +! +! PURPOSE +! Gets fill value for a dataset creation property list +! +! Inputs: +! prp_id - Property list identifier +! type_id - Datatype identifier of fill value datatype (in memory) +! +! Outputs: +! fillvalue - Fillvalue +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 14, 2001 +! +! Added the recommended way of passing fillvalue +! and that is by passing the C address, all other +! ways are obsolete and should be avoided. June, 2008 MSB +! +! NOTES +! h5pget(get)fill_value_f function is overloaded to support +! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. +! +! Fortran2003 Interface: +!! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) +!! INTEGER(HID_T), INTENT(IN) :: prp_id +!! INTEGER(HID_T), INTENT(IN) :: type_id +!! TYPE(C_PTR) , INTENT(OUT) :: fillvalue +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE h5pget_fill_value_ptr(prp_id, type_id, fillvalue, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of + ! of fillvalue datatype + ! (in memory) + TYPE(C_PTR), INTENT(OUT) :: fillvalue ! Fillvalue + INTEGER, INTENT(OUT) :: hdferr ! Error code + + hdferr = h5pget_fill_value_c(prp_id, type_id, fillvalue) + + END SUBROUTINE h5pget_fill_value_ptr + +! +!****s* H5P (F03)/h5pset_f_F90 +! +! NAME +! h5pset_f +! +! PURPOSE +! Sets a property list value +! +! Inputs: +! prp_id - Property list identifier to modify +! name - Name of property to modify +! value - Property value, supported types are: +! INTEGER +! REAL +! DOUBLE PRECISION +! CHARACTER(LEN=*) +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: +!! SUBROUTINE h5pset_f(plid, name, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: plid +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! TYPE , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pset_integer(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + INTEGER, INTENT(IN), TARGET :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + + INTEGER :: name_len + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(value) + + name_len = LEN(name) + hdferr = h5pget_c(prp_id, name, name_len, f_ptr) + + END SUBROUTINE h5pset_integer + + SUBROUTINE h5pset_char(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + CHARACTER(LEN=*), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + INTEGER :: i + CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr + INTEGER :: chr_len + + TYPE(C_PTR) :: f_ptr + ! To resolve Issue #1 outlined in the preamble of this file we + ! need to pack the character string into an array. + + chr_len = LEN(value) + ALLOCATE(chr(1:chr_len), STAT=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + + DO i = 1, chr_len + chr(i) = value(i:i) + ENDDO + + f_ptr = C_LOC(chr(1)(1:1)) + + name_len = LEN(name) + hdferr = h5pget_c(prp_id, name, name_len, f_ptr) + + DEALLOCATE(chr) + + END SUBROUTINE h5pset_char +! +!****s* H5P (F03)/h5pget_f_F90 +! +! NAME +! h5pget_f +! +! PURPOSE +! Queries the value of a property. +! +! Inputs: +! prp_id - Property list identifier to modify +! name - Name of property to get +! value - Property value, supported types are: +! INTEGER +! REAL +! DOUBLE PRECISION +! CHARACTER(LEN=*) +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran90 Interface: +!! SUBROUTINE h5pget_f(plid, name, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: plid +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! TYPE , INTENT(OUT) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE h5pget_integer(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + INTEGER, INTENT(OUT), TARGET :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(value) + + name_len = LEN(name) + hdferr = h5pget_c(prp_id, name, name_len, f_ptr) + + END SUBROUTINE h5pget_integer + + SUBROUTINE h5pget_char(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + CHARACTER(LEN=*), INTENT(OUT) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + INTEGER :: i + CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr + INTEGER :: chr_len + TYPE(C_PTR) :: f_ptr + + chr_len = LEN(value) + ALLOCATE(chr(1:chr_len), STAT=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + f_ptr = C_LOC(chr(1)(1:1)) + + name_len = LEN(name) + hdferr = h5pget_c(prp_id, name, name_len, f_ptr) + + DO i = 1, chr_len + value(i:i) = chr(i) + ENDDO + + DEALLOCATE(chr) + + END SUBROUTINE h5pget_char + +! +!****s* H5P (F03)/h5pset_f_F03 +! +! NAME +! h5pset_f +! +! PURPOSE +! Sets a property list value +! +! Inputs: +! prp_id - Property list identifier to modify +! name - Name of property to modify +! value - Pointer to value to set the property to +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran2003 Interface: +!! SUBROUTINE h5pset_f(plid, name, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: plid +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! TYPE(C_PTR) , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pset_ptr(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + TYPE(C_PTR), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + name_len = LEN(name) + hdferr = h5pset_c(prp_id, name, name_len, value) + + END SUBROUTINE h5pset_ptr +! +!****s* H5P (F03)/h5pget_f_F03 +! +! NAME +! h5pget_f (F03) +! +! PURPOSE +! Queries the value of a property. +! +! Inputs: +! prp_id - Property list identifier to modify +! name - Name of property to get +! value - Pointer to a location to which to copy the value of of the property +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! Fortran2003 Interface: +!! SUBROUTINE h5pget_f(plid, name, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: plid +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! TYPE(C_PTR) , INTENT(OUT) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pget_ptr(prp_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify + TYPE(C_PTR), INTENT(OUT) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + name_len = LEN(name) + hdferr = h5pget_c(prp_id, name, name_len, value) + + END SUBROUTINE h5pget_ptr +! +!****s* H5P (F03)/h5pregister_f_F90 +! +! NAME +! h5pregister +! +! PURPOSE +! Registers a permanent property with a property list class. +! +! Inputs: +! class - Property list class identifier +! name - Name of property to register +! size - Size of the property value +! value - Property value, supported types are: +! INTEGER +! REAL +! DOUBLE PRECISION +! CHARACTER(LEN=*) +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! October 10, 2002 +! +! Fortran90 Interface: +!! SUBROUTINE h5pregister_f(class, name, size, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: class +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! INTEGER(SIZE_T) , INTENT(IN) :: size +!! TYPE , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pregister_integer(class, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register + INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value + INTEGER, INTENT(IN), TARGET :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(value) + + name_len = LEN(name) + hdferr = h5pregister_c(class, name, name_len, size, f_ptr) + + END SUBROUTINE h5pregister_integer + + + SUBROUTINE h5pregister_char(class, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register + INTEGER(SIZE_T), INTENT(IN) :: size ! size of the property value + CHARACTER(LEN=*), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + INTEGER :: i + CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr + INTEGER :: chr_len + + TYPE(C_PTR) :: f_ptr + ! To resolve Issue #1 outlined in the preamble of this file we + ! need to pack the character string into an array. + + chr_len = LEN(value) + ALLOCATE(chr(1:chr_len), STAT=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + + DO i = 1, chr_len + chr(i) = value(i:i) + ENDDO + + f_ptr = C_LOC(chr(1)(1:1)) + + name_len = LEN(name) + hdferr = h5pregister_c(class, name, name_len, size, f_ptr) + DEALLOCATE(chr) + END SUBROUTINE h5pregister_char +! +!****s* H5P (F03)/h5pregister_f_F03 +! +! NAME +! h5pregister (F03) +! +! PURPOSE +! Registers a permanent property with a property list class. +! +! Inputs: +! class - Property list class identifier +! name - Name of property to register +! size - Size of the property value +! value - Pointer to value to set the property to +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! June 24, 2008 +! +! Fortran2003 Interface: +!! SUBROUTINE h5pregister_f(class, name, size, value, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: class +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! INTEGER(SIZE_T) , INTENT(IN) :: size +!! TYPE(C_PTR) , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + SUBROUTINE h5pregister_ptr(class, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register + INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value + TYPE(C_PTR), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + name_len = LEN(name) + hdferr = h5pregister_c(class, name, name_len, size, value) + END SUBROUTINE h5pregister_ptr + +! +!****s* H5P (F03)/h5pinsert_f_F90 +! +! NAME +! h5pinsert (f90) +! +! PURPOSE +! Registers a temporary property with a property list class. +! +! Inputs: +! plist - Property list class identifier +! name - Name of property to insert +! size - Size of the property value +! value - Property value, supported types are: +! INTEGER +! REAL +! DOUBLE PRECISION +! CHARACTER(LEN=*) +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! October 10, 2002 +! +! Fortran90 Interface: +!! SUBROUTINE h5pinsert_f +!! INTEGER(HID_T) , INTENT(IN) :: plist +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! INTEGER(SIZE_T) , INTENT(IN) :: size +!! TYPE , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pinsert_integer(plist, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert + INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value + INTEGER, INTENT(IN), TARGET :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + TYPE(c_ptr) :: f_ptr + + f_ptr = c_loc(value) + + name_len = LEN(name) + hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr) + END SUBROUTINE h5pinsert_integer + + SUBROUTINE h5pinsert_char(plist, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert + INTEGER(SIZE_T), INTENT(IN) :: size ! Size of property value + CHARACTER(LEN=*), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + INTEGER :: i + CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr + INTEGER :: chr_len + + TYPE(c_ptr) :: f_ptr + ! To resolve Issue #1 outlined in the preamble of this file we + ! need to pack the character string into an array. + + chr_len = LEN(value) + ALLOCATE(chr(1:chr_len), STAT=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + + DO i = 1, chr_len + chr(i) = value(i:i) + ENDDO + + f_ptr = C_LOC(chr(1)(1:1)) + + name_len = LEN(name) + hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr) + + DEALLOCATE(chr) + + END SUBROUTINE h5pinsert_char + +! +!****s* H5P (F03)/h5pinsert_f_F03 +! +! NAME +! h5pinsert (f03) +! +! PURPOSE +! Registers a temporary property with a property list class. +! +! Inputs: +! plist - Property list class identifier +! name - Name of property to insert +! size - Size of the property value +! value - Pointer to new value pointer for the property being modified +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! June 24, 2008 +! +! Fortran90 Interface: +!! SUBROUTINE h5pinsert_f +!! INTEGER(HID_T) , INTENT(IN) :: plist +!! CHARACTER(LEN=*), INTENT(IN) :: name +!! INTEGER(SIZE_T) , INTENT(IN) :: size +!! TYPE(C_PTR) , INTENT(IN) :: value +!! INTEGER , INTENT(OUT) :: hdferr +!***** + SUBROUTINE h5pinsert_ptr(plist, name, size, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert + INTEGER(SIZE_T), INTENT(IN) :: size ! Size of property value + TYPE(c_ptr), INTENT(IN) :: value ! Property value + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER :: name_len + + name_len = LEN(name) + hdferr = h5pinsert_c(plist, name , name_len, size, value) + END SUBROUTINE h5pinsert_ptr +! +!****s* H5P (F03)/h5pcreate_class_f_F03 +! +! NAME +! h5pcreate_class_f +! +! PURPOSE +! Create a new property list class +! +! Inputs: +! parent - Parent property list class identifier +! Possible values include: +! H5P_ROOT_F +! H5P_FILE_CREATE_F +! H5P_FILE_ACCESS_F +! H5P_DATASET_CREATE_F +! H5P_DATASET_XFER_F +! H5P_FILE_MOUNT_F +! name - Name of property to create +! +! Outputs: +! class - Property list class identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! H5P_cls_create_func_t (create) - Callback routine called when a property list is created +! create_data - User pointer to any class creation information needed +! H5P_cls_copy_func_t (copy) - Callback routine called when a property list is copied +! copy_data - User pointer to any class copy information needed +! H5P_cls_close_func_t (close) - Callback routine called when a property list is being closed +! close_data - User pointer to any class close information needed +! +! AUTHOR +! Elena Pourmal +! October 9, 2002 +! +! HISTORY +! Added callback arguments +! M. Scot Breitenfeld, July 3, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5pcreate_class_f(parent, name, class, hdferr, create, create_data, & + copy, copy_data, CLOSE, close_data) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: parent + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER(HID_T) , INTENT(OUT) :: class + INTEGER , INTENT(OUT) :: hdferr + TYPE(C_PTR) , OPTIONAL :: create_data, copy_data, close_data + TYPE(C_FUNPTR) , OPTIONAL :: create, copy, close +!***** + INTEGER :: name_len + TYPE(C_PTR) :: create_data_default, copy_data_default, close_data_default + TYPE(C_FUNPTR) :: create_default, copy_default, close_default + INTERFACE + INTEGER FUNCTION h5pcreate_class_c(parent, name, name_len, class, & + create, create_data, copy, copy_data, close, close_data) & + BIND(C, NAME='h5pcreate_class_c') + IMPORT :: c_char, c_ptr, c_funptr + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: parent + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: name_len + INTEGER(HID_T), INTENT(OUT) :: class + TYPE(C_PTR), VALUE :: create_data, copy_data, close_data + TYPE(C_FUNPTR), VALUE :: create, copy, close + END FUNCTION h5pcreate_class_c + END INTERFACE + name_len = LEN(name) + + create_default = c_null_funptr !fix:scot + create_data_default = c_null_ptr + copy_default = c_null_funptr !fix:scot + copy_data_default = c_null_ptr + close_default = c_null_funptr !fix:scot + close_data_default = c_null_ptr + + IF(PRESENT(create)) create_default = create + IF(PRESENT(create_data)) create_data_default = create_data + IF(PRESENT(copy)) copy_default = copy + IF(PRESENT(copy_data)) copy_data_default = copy_data + IF(PRESENT(close)) close_default = close + IF(PRESENT(close_data)) close_data_default = close_data + + hdferr = h5pcreate_class_c(parent, name , name_len, class, & + create_default, create_data_default, & + copy_default, copy_data_default, & + close_default, close_data_default) + + END SUBROUTINE h5pcreate_class_f + +! +!****s* H5P (F03)/h5pset_file_image_f_F03 +! +! NAME +! h5pset_file_image_f +! +! PURPOSE +! Sets an initial file image in a memory buffer. +! +! Inputs: +! fapl_id - File access property list identifier +! buf_ptr - Pointer to the initial file image, +! or C_NULL_PTR if no initial file image is desired +! buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! February 19, 2012 +! +! Fortran2003 Interface: + SUBROUTINE h5pset_file_image_f(fapl_id, buf_ptr, buf_len, hdferr) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: fapl_id + TYPE(C_PTR) , INTENT(IN) :: buf_ptr + INTEGER(SIZE_T), INTENT(IN) :: buf_len + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5pset_file_image_c(fapl_id, buf_ptr, buf_len) & + BIND(C, NAME='h5pset_file_image_c') + IMPORT :: c_ptr + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: fapl_id + TYPE(C_PTR), VALUE :: buf_ptr + INTEGER(SIZE_T), INTENT(IN) :: buf_len + END FUNCTION h5pset_file_image_c + END INTERFACE + + hdferr = h5pset_file_image_c(fapl_id, buf_ptr, buf_len) + + END SUBROUTINE h5pset_file_image_f +! +!****s* H5P (F03)/h5pget_file_image_f_F03 +! +! NAME +! h5pget_file_image_f +! +! PURPOSE +! Retrieves a copy of the file image designated as the initial content and structure of a file. +! +! Inputs: +! fapl_id - File access property list identifier. +! +! Outputs: +! buf_ptr - Will hold either a C_NULL_PTR or a scalar of type +! c_loc. If buf_ptr is not C_NULL_PTR, on successful +! return, buf_ptr shall contain a C pointer to a copy +! of the initial image provided in the last call to +! H5Pset_file_image_f for the supplied fapl_id, or +! buf_ptr shall contain a C_NULL_PTR if there is no +! initial image set. +! +! buf_len_ptr - Contains the value of the buffer parameter for +! the initial image in the supplied fapl_id. The value +! will be 0 if no initial image is set. +! +! +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! February 19, 2012 +! +! Fortran2003 Interface: + SUBROUTINE h5pget_file_image_f(fapl_id, buf_ptr, buf_len_ptr, hdferr) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: fapl_id + TYPE(C_PTR) , INTENT(OUT), DIMENSION(*) :: buf_ptr + INTEGER(SIZE_T), INTENT(OUT) :: buf_len_ptr + INTEGER , INTENT(OUT) :: hdferr + +!***** + INTERFACE + INTEGER FUNCTION h5pget_file_image_c(fapl_id, buf_ptr, buf_len_ptr) & + BIND(C, NAME='h5pget_file_image_c') + IMPORT :: c_ptr + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: fapl_id + TYPE(C_PTR), DIMENSION(*), INTENT(OUT) :: buf_ptr + INTEGER(SIZE_T), INTENT(OUT) :: buf_len_ptr + END FUNCTION h5pget_file_image_c + END INTERFACE + + hdferr = h5pget_file_image_c(fapl_id, buf_ptr, buf_len_ptr) + + END SUBROUTINE h5pget_file_image_f + +! ********************************************************************* +! Fortran interfaces for H5P functions needed by parallel MPI programs. +! ********************************************************************* + +#ifdef H5_HAVE_PARALLEL +!****s* H5P/h5pset_fapl_mpio_f +! +! NAME +! h5pset_fapl_mpio_f +! +! PURPOSE +! Stores MPI IO communicator information to the file +! access property list. +! +! INPUTS +! prp_id - file access property list identifier +! comm - MPI-2 communicator +! info - MPI-2 info object +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! November, 2000 +! +! SOURCE + SUBROUTINE h5pset_fapl_mpio_f(prp_id, comm, info, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: comm ! MPI communicator to be used for file open + ! as defined in MPI_FILE_OPEN of MPI-2 + INTEGER, INTENT(IN) :: info ! MPI info object to be used for file open + ! as defined in MPI_FILE_OPEN of MPI-2 + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5pset_fapl_mpio_c(prp_id, comm, info) & + BIND(C,NAME='h5pset_fapl_mpio_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER , INTENT(IN) :: comm + INTEGER , INTENT(IN) :: info + END FUNCTION h5pset_fapl_mpio_c + END INTERFACE + + hdferr = h5pset_fapl_mpio_c(prp_id, comm, info) + + END SUBROUTINE h5pset_fapl_mpio_f + +!****s* H5P/h5pget_fapl_mpio_f +! +! NAME +! h5pget_fapl_mpio_f +! +! PURPOSE +! Returns MPI communicator information. +! +! INPUTS +! prp_id - file access property list identifier +! OUTPUTS +! comm - MPI-2 communicator +! info - MPI-2 info object +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! November, 2000 +! +! SOURCE + SUBROUTINE h5pget_fapl_mpio_f(prp_id, comm, info, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: comm ! buffer to return communicator + INTEGER, INTENT(OUT) :: info ! buffer to return info object + ! as defined in MPI_FILE_OPEN of MPI-2 + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5pget_fapl_mpio_c(prp_id, comm, info) & + BIND(C,NAME='h5pget_fapl_mpio_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER , INTENT(OUT) :: comm + INTEGER , INTENT(OUT) :: info + END FUNCTION h5pget_fapl_mpio_c + END INTERFACE + + hdferr = h5pget_fapl_mpio_c(prp_id, comm, info) + + END SUBROUTINE h5pget_fapl_mpio_f + +!****s* H5P/h5pset_dxpl_mpio_f +! +! NAME +! h5pset_dxpl_mpio_f +! +! PURPOSE +! Sets data transfer mode. +! +! INPUTS +! prp_id - data transfer property list identifier +! data_xfer_mode - transfer mode; possible values are: +! H5FD_MPIO_INDEPENDENT_F +! H5FD_MPIO_COLLECTIVE_F +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! November, 2000 +! +! SOURCE + SUBROUTINE h5pset_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(IN) :: data_xfer_mode ! Data transfer mode. Possible values are: + ! H5FD_MPIO_INDEPENDENT_F + ! H5FD_MPIO_COLLECTIVE_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5pset_dxpl_mpio_c(prp_id, data_xfer_mode) & + BIND(C,NAME='h5pset_dxpl_mpio_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER , INTENT(IN) :: data_xfer_mode + END FUNCTION h5pset_dxpl_mpio_c + END INTERFACE + + hdferr = h5pset_dxpl_mpio_c(prp_id, data_xfer_mode) + END SUBROUTINE h5pset_dxpl_mpio_f + +!****s* H5P/h5pget_dxpl_mpio_f +! +! NAME +! h5pget_dxpl_mpio_f +! +! PURPOSE +! Returns the data transfer mode. +! +! INPUTS +! prp_id - data transfer property list identifier +! OUTPUTS +! data_xfer_mode- transfer mode; possible values are: +! H5FD_MPIO_INDEPENDENT_F +! H5FD_MPIO_COLLECTIVE_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! November, 2000 +! +! SOURCE + SUBROUTINE h5pget_dxpl_mpio_f(prp_id, data_xfer_mode, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier + INTEGER, INTENT(OUT) :: data_xfer_mode ! Data transfer mode. Possible values are: + ! H5FD_MPIO_INDEPENDENT_F + ! H5FD_MPIO_COLLECTIVE_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5pget_dxpl_mpio_c(prp_id, data_xfer_mode) & + BIND(C,NAME='h5pget_dxpl_mpio_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: prp_id + INTEGER , INTENT(OUT) :: data_xfer_mode + END FUNCTION h5pget_dxpl_mpio_c + END INTERFACE + + hdferr = h5pget_dxpl_mpio_c(prp_id, data_xfer_mode) + END SUBROUTINE h5pget_dxpl_mpio_f + +!****s* H5P/h5pget_mpio_actual_io_mode_f +! NAME +! h5pget_mpio_actual_io_mode_f +! +! PURPOSE +! Retrieves the type of I/O that HDF5 actually performed on the last +! parallel I/O call. This is not necessarily the type of I/O requested. +! +! INPUTS +! dxpl_id - Dataset transfer property list identifier. +! OUTPUTS +! actual_io_mode - The type of I/O performed by this process. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! July 27, 2012 +! +! HISTORY +! +! Fortran90 Interface: + SUBROUTINE h5pget_mpio_actual_io_mode_f(dxpl_id, actual_io_mode, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dxpl_id + INTEGER , INTENT(OUT) :: actual_io_mode + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5pget_mpio_actual_io_mode_c(dxpl_id, actual_io_mode) & + BIND(C,NAME='h5pget_mpio_actual_io_mode_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dxpl_id + INTEGER , INTENT(OUT) :: actual_io_mode + END FUNCTION h5pget_mpio_actual_io_mode_c + END INTERFACE + + actual_io_mode = -1 + + hdferr = h5pget_mpio_actual_io_mode_c(dxpl_id, actual_io_mode) + + END SUBROUTINE h5pget_mpio_actual_io_mode_f +#endif + +END MODULE H5P + + + diff --git a/fortran/src/H5Pff.f90 b/fortran/src/H5Pff.f90 deleted file mode 100644 index 3409f15..0000000 --- a/fortran/src/H5Pff.f90 +++ /dev/null @@ -1,6400 +0,0 @@ -!****h* ROBODoc/H5P (F90) -! -! NAME -! H5P_PROVISIONAL -! -! PURPOSE -! This file contains Fortran interfaces for H5P functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5P function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5P - - USE H5GLOBAL - - INTERFACE h5pset_fapl_multi_f - MODULE PROCEDURE h5pset_fapl_multi_l - MODULE PROCEDURE h5pset_fapl_multi_s - END INTERFACE - -CONTAINS - -!****s* H5P/h5pcreate_f -! NAME -! h5pcreate_f -! -! PURPOSE -! Creates a new property as an instance of a property -! list class. -! -! INPUTS -! class - type of the property class to be created. -! Possible values are: -! H5P_OBJECT_CREATE_F -! H5P_FILE_CREATE_F -! H5P_FILE_ACCESS_F -! H5P_DATASET_CREATE_F -! H5P_DATASET_ACCESS_F -! H5P_DATASET_XFER_F -! H5P_FILE_MOUNT_F -! H5P_GROUP_CREATE_F -! H5P_GROUP_ACCESS_F -! H5P_DATATYPE_CREATE_F -! H5P_DATATYPE_ACCESS_F -! H5P_STRING_CREATE_F -! H5P_ATTRIBUTE_CREATE _F -! H5P_OBJECT_COPY_F -! H5P_LINK_CREATE_F -! H5P_LINK_ACCESS_F -! -! OUTPUTS -! prp_id - property list identifier -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pcreate_f(class, prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class - INTEGER(HID_T), INTENT(OUT) :: prp_id - INTEGER , INTENT(OUT) :: hdferr -!***** -! INTEGER, EXTERNAL :: h5pcreate_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pcreate_c(class, prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCREATE_C'::h5pcreate_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: class - INTEGER(HID_T), INTENT(OUT) :: prp_id - END FUNCTION h5pcreate_c - END INTERFACE - - hdferr = h5pcreate_c(class, prp_id) - END SUBROUTINE h5pcreate_f - -!****s* H5P/h5pset_preserve_f -! NAME -! h5pset_preserve_f -! -! PURPOSE -! Sets the dataset transfer property list status to -! TRUE or FALSE for initializing compound datatype -! members during write/read operations. -! -! INPUTS -! prp_id - property list identifier -! flag - status flag -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Datatype of the flag parameter is changed from -! INTEGER to LOGICAL June 4, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_preserve_f(prp_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - LOGICAL, INTENT(IN) :: flag ! TRUE/FALSE flag to set the dataset - ! transfer property for partila writing/reading - ! compound datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: flag_c - -! INTEGER, EXTERNAL :: h5pset_preserve_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_preserve_c(prp_id, flag_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_PRESERVE_C'::h5pset_preserve_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER :: flag_c - END FUNCTION h5pset_preserve_c - END INTERFACE - flag_c = 0 - IF(flag) flag_c = 1 - hdferr = h5pset_preserve_c(prp_id, flag_c) - END SUBROUTINE h5pset_preserve_f - -!****s* H5P/h5pget_preserve_f -! NAME -! h5pget_preserve_f -! -! PURPOSE -! Checks status of the dataset transfer property list. -! -! INPUTS -! prp_id - property list identifier -! -! OUTPUTS -! flag - status flag -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Datatype of the flag parameter is changed from -! INTEGER to LOGICAL -! June 4, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pget_preserve_f(prp_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag. Shows status of the dataset's - ! transfer property for partial writing/reading - ! compound datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: flag_c - -! INTEGER, EXTERNAL :: h5pget_preserve_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_preserve_c(prp_id, flag_c) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_PRESERVE_C'::h5pget_preserve_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER :: flag_c - END FUNCTION h5pget_preserve_c - END INTERFACE - - hdferr = h5pget_preserve_c(prp_id, flag_c) - flag = .FALSE. - IF(flag_c .EQ. 1) flag = .TRUE. - END SUBROUTINE h5pget_preserve_f - -!****s* H5P/h5pget_class_f -! NAME -! h5pget_class_f -! -! PURPOSE -! Returns the property list class for a property list. -! -! INPUTS -! prp_id - property list identifier -! -! OUTPUTS -! classtype - property list class -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_class_f(prp_id, classtype, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: classtype ! The type of the property list - ! to be created. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_class_c(prp_id, classtype) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_C'::h5pget_class_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(OUT) :: classtype - END FUNCTION h5pget_class_c - END INTERFACE - - hdferr = h5pget_class_c(prp_id, classtype) - END SUBROUTINE h5pget_class_f - -!****s* H5P/h5pcopy_f -! NAME -! h5pcopy_f -! -! PURPOSE -! Copies an existing property list to create a new -! property list -! -! INPUTS -! prp_id - property list identifier -! OUTPUTS -! new_prp_id - new property list identifier -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pcopy_f(prp_id, new_prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: new_prp_id ! Identifier of property list - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pcopy_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pcopy_c(prp_id, new_prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCOPY_C'::h5pcopy_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(OUT) :: new_prp_id - END FUNCTION h5pcopy_c - END INTERFACE - - hdferr = h5pcopy_c(prp_id, new_prp_id) - END SUBROUTINE h5pcopy_f - -!****s* H5P/h5pclose_f -! NAME -! h5pclose_f -! -! PURPOSE -! Terminates access to a property list. -! -! INPUTS -! prp_id - identifier of the property list to -! terminate access to. -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pclose_f(prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pclose_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pclose_c(prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCLOSE_C'::h5pclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - END FUNCTION h5pclose_c - END INTERFACE - - hdferr = h5pclose_c(prp_id) - END SUBROUTINE h5pclose_f - -!****s* H5P/h5pset_chunk_f -! NAME -! h5pset_chunk_f -! -! PURPOSE -! Sets the size of the chunks used to store -! a chunked layout dataset. -! -! INPUTS -! prp_id - datatset creation property list identifier -! ndims - number of dimensions for each chunk -! dims - array with dimension sizes for each chunk -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_chunk_f(prp_id, ndims, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions - INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims - ! Array containing sizes of - ! chunk dimensions - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_chunk_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_chunk_c(prp_id, ndims, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHUNK_C'::h5pset_chunk_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: ndims - INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(IN) :: dims - END FUNCTION h5pset_chunk_c - END INTERFACE - - hdferr = h5pset_chunk_c(prp_id, ndims, dims) - END SUBROUTINE h5pset_chunk_f - -!****s* H5P/h5pget_chunk_f -! NAME -! h5pget_chunk_f -! -! PURPOSE -! Retrieves the size of chunks for the raw data of a -! chunked layout dataset -! -! INPUTS -! prp_id - property list identifier -! ndims - size of dims array -! OUTPUTS -! dims - array with dimension sizes for each chunk -! hdferr - error code -! Success: number of chunk dimensions -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_chunk_f(prp_id, ndims, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: ndims ! Number of chunk dimensions to - ! to return - INTEGER(HSIZE_T), DIMENSION(ndims), INTENT(OUT) :: dims - ! Array containing sizes of - ! chunk dimensions - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! number of chunk dimensions on success, - ! -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_chunk_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_chunk_c(prp_id, ndims, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHUNK_C'::h5pget_chunk_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER :: ndims - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims - END FUNCTION h5pget_chunk_c - END INTERFACE - - hdferr = h5pget_chunk_c(prp_id, ndims, dims) - END SUBROUTINE h5pget_chunk_f - -!****s* H5P/h5pset_deflate_f -! NAME -! h5pset_deflate_f -! -! PURPOSE -! Sets compression method and compression level. -! -! INPUTS -! prp_id - property list identifier -! level - compression level -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_deflate_f(prp_id, level, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: level ! Compression level - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_deflate_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_deflate_c(prp_id, level) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_DEFLATE_C'::h5pset_deflate_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: level - END FUNCTION h5pset_deflate_c - END INTERFACE - hdferr = h5pset_deflate_c(prp_id, level) - - END SUBROUTINE h5pset_deflate_f - -!****s* H5P/h5pget_version_f -! NAME -! h5pget_version_f -! -! PURPOSE -! Retrieves the version information of various objects -! for a file creation property list -! -! INPUTS -! prp_id - file createion property list identifier -! OUTPUTS -! boot - super block version number -! freelist - global freelist version number -! stab - symbol table version number -! shhdr - shared object header version number -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_version_f(prp_id, boot, freelist, & - stab, shhdr, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, DIMENSION(:), INTENT(OUT) :: boot ! Array to put boot - ! block version number - INTEGER, DIMENSION(:), INTENT(OUT) :: freelist ! Array to put global - ! Freelist version number - - INTEGER, DIMENSION(:), INTENT(OUT) :: stab ! Array to put symbol - ! table version number - INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr ! Array to put shared - ! object header version number - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_version_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_version_c(prp_id, boot, freelist, stab, shhdr) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_VERSION_C'::h5pget_version_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, DIMENSION(:), INTENT(OUT) :: boot - INTEGER, DIMENSION(:), INTENT(OUT) :: freelist - INTEGER, DIMENSION(:), INTENT(OUT) :: stab - INTEGER, DIMENSION(:), INTENT(OUT) :: shhdr - END FUNCTION h5pget_version_c - END INTERFACE - - hdferr = h5pget_version_c(prp_id, boot, freelist, stab, shhdr) - END SUBROUTINE h5pget_version_f - -!****s* H5P/h5pset_userblock_f -! NAME -! h5pset_userblock_f -! -! PURPOSE -! Sets user block size -! -! INPUTS -! prp_id - file creation property list to modify -! size - size of the user-block in bytes -! -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_userblock_f (prp_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Size of the user-block in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_userblock_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_userblock_c(prp_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_USERBLOCK_C'::h5pset_userblock_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_userblock_c - END INTERFACE - - hdferr = h5pset_userblock_c(prp_id, size) - END SUBROUTINE h5pset_userblock_f - -!****s* H5P/h5pget_userblock_f -! NAME -! h5pget_userblock_f -! -! PURPOSE -! Gets user block size. -! -! INPUTS -! -! prp_id - file creation property list identifier -! OUTPUTS -! -! block_size - size of the user block in bytes -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_userblock_f(prp_id, block_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: block_size ! Size of the - ! user-block in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_userblock_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_userblock_c(prp_id, block_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_USERBLOCK_C'::h5pget_userblock_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(OUT) :: block_size - END FUNCTION h5pget_userblock_c - END INTERFACE - hdferr = h5pget_userblock_c(prp_id, block_size) - END SUBROUTINE h5pget_userblock_f - -!****s* H5P/h5pset_sizes_f -! NAME -! h5pset_sizes_f -! -! PURPOSE -! Sets the byte size of the offsets and lengths used -! to address objects in an HDF5 file. -! -! INPUTS -! prp_id - file creation property list identifier -! sizeof_addr - size of an object offset in bytes -! sizeof_size - size of an object length in bytes -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_sizes_f (prp_id, sizeof_addr, sizeof_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr ! Size of an object - ! offset in bytes - INTEGER(SIZE_T), INTENT(IN) :: sizeof_size ! Size of an object - ! length in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pset_sizes_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SIZES_C'::h5pset_sizes_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(IN) :: sizeof_addr - INTEGER(SIZE_T), INTENT(IN) :: sizeof_size - END FUNCTION h5pset_sizes_c - END INTERFACE - - hdferr = h5pset_sizes_c(prp_id, sizeof_addr, sizeof_size) - END SUBROUTINE h5pset_sizes_f - -!****s* H5P/h5pget_sizes_f -! NAME -! h5pget_sizes_f -! -! PURPOSE -! Retrieves the size of the offsets and lengths used -! in an HDF5 file -! -! INPUTS -! prp_id - file creation property list identifier -! OUTPUTS -! -! sizeof_addr - size of an object offset in bytes -! sizeof_size - size of an object length in bytes -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_sizes_f(prp_id, sizeof_addr, sizeof_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr ! Size of an object - ! offset in bytes - INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size ! Size of an object - ! length in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_sizes_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIZES_C'::h5pget_sizes_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(OUT) :: sizeof_addr - INTEGER(SIZE_T), INTENT(OUT) :: sizeof_size - END FUNCTION h5pget_sizes_c - END INTERFACE - - hdferr = h5pget_sizes_c(prp_id, sizeof_addr, sizeof_size) - END SUBROUTINE h5pget_sizes_f - -!****s* H5P/h5pset_sym_k_f -! NAME -! h5pset_sym_k_f -! -! PURPOSE -! Sets the size of parameters used to control the -!symbol table nodes -! -! INPUTS -! -! prp_id - file creation property list identifier -! ik - symbol table tree rank -! lk - symbol table node size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_sym_k_f (prp_id, ik, lk, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: ik ! Symbol table tree rank - INTEGER, INTENT(IN) :: lk ! Symbol table node size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_sym_k_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_sym_k_c(prp_id, ik, lk) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SYM_K_C'::h5pset_sym_k_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: ik - INTEGER, INTENT(IN) :: lk - END FUNCTION h5pset_sym_k_c - END INTERFACE - - hdferr = h5pset_sym_k_c(prp_id, ik, lk) - END SUBROUTINE h5pset_sym_k_f -!****s* H5P/h5pget_sym_k_f -! NAME -! h5pget_sym_k_f -! -! PURPOSE -! Retrieves the size of the symbol table B-tree 1/2 rank -! and the symbol table leaf node 1/2 size. -! -! INPUTS -! -! prp_id - file creation property list identifier -! OUTPUTS -! -! ik - symbol table tree 1/2 rank -! lk - symbol table node 1/2 size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_sym_k_f(prp_id, ik, lk, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: ik ! Symbol table tree rank - INTEGER, INTENT(OUT) :: lk ! Symbol table node size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_sym_k_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_sym_k_c(prp_id, ik, lk) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SYM_K_C'::h5pget_sym_k_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: ik - INTEGER, INTENT(OUT) :: lk - END FUNCTION h5pget_sym_k_c - END INTERFACE - - hdferr = h5pget_sym_k_c(prp_id, ik, lk) - END SUBROUTINE h5pget_sym_k_f -!****s* H5P/h5pset_istore_k_f -! NAME -! h5pset_istore_k_f -! -! PURPOSE -! Sets the size of the parameter used to control the -! B-trees for indexing chunked datasets -! -! INPUTS -! -! prp_id - file creation property list identifier -! ik - 1/2 rank of chunked storage B-tree -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_istore_k_f (prp_id, ik, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: ik ! 1/2 rank of chunked storage B-tree - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_istore_k_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_istore_k_c(prp_id, ik) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ISTORE_K_C'::h5pset_istore_k_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: ik - END FUNCTION h5pset_istore_k_c - END INTERFACE - - hdferr = h5pset_istore_k_c(prp_id, ik) - END SUBROUTINE h5pset_istore_k_f - -!****s* H5P/h5pget_istore_k_f -! NAME -! h5pget_istore_k_f -! -! PURPOSE -! Queries the 1/2 rank of an indexed storage B-tree. -! -! INPUTS -! -! prp_id - file creation property list identifier -! OUTPUTS -! -! ik - 1/2 rank of chunked storage B-tree -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_istore_k_f(prp_id, ik, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: ik ! 1/2 rank of chunked storage B-tree - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_istore_k_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_istore_k_c(prp_id, ik) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ISTORE_K_C'::h5pget_istore_k_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: ik - END FUNCTION h5pget_istore_k_c - END INTERFACE - - hdferr = h5pget_istore_k_c(prp_id, ik) - END SUBROUTINE h5pget_istore_k_f - -!****s* H5P/h5pget_driver_f -! NAME -! h5pget_driver_f -! -! PURPOSE -! Returns low-lever driver identifier. -! -! INPUTS -! -! prp_id - file access or data transfer property -! list identifier. -! OUTPUTS -! -! driver - low-level driver identifier -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_driver_f(prp_id, driver, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: driver ! Low-level file driver identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_driver_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_driver_c(prp_id, driver) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_DRIVER_C'::h5pget_driver_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(OUT) :: driver - END FUNCTION h5pget_driver_c - END INTERFACE - - hdferr = h5pget_driver_c(prp_id, driver) - END SUBROUTINE h5pget_driver_f - -!****s* H5P/h5pset_fapl_stdio_f -! NAME -! h5pset_fapl_stdio_f -! -! PURPOSE -! Sets the standard I/O driver. -! -! INPUTS -! -! prp_id - file access property list identifier -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_stdio_f (prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_fapl_stdio_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_stdio_c(prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_STDIO_C'::h5pset_fapl_stdio_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - END FUNCTION h5pset_fapl_stdio_c - END INTERFACE - - hdferr = h5pset_fapl_stdio_c(prp_id) - END SUBROUTINE h5pset_fapl_stdio_f - -!****s* H5P/h5pget_stdio_f -! NAME -! h5pget_stdio_f -! -! PURPOSE -! NOT AVAILABLE -! -! INPUTS -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! SOURCE -! SUBROUTINE h5pget_stdio_f (prp_id, io, hdferr) -! -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier -! INTEGER, INTENT(OUT) :: io ! value indicates that the file - !access property list is set to - !the stdio driver -! INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_stdio_c -! hdferr = h5pget_stdio_c(prp_id, io) -! END SUBROUTINE h5pget_stdio_f - -!****s* H5P/h5pset_fapl_sec2_f -! NAME -! h5pset_fapl_sec2_f -! -! PURPOSE -! Sets the sec2 driver. -! -! INPUTS -! -! prp_id - file access property list identifier -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_sec2_f (prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_fapl_sec2_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_sec2_c(prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_SEC2_C'::h5pset_fapl_sec2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - END FUNCTION h5pset_fapl_sec2_c - END INTERFACE - - hdferr = h5pset_fapl_sec2_c(prp_id) - END SUBROUTINE h5pset_fapl_sec2_f - -!****s* H5P/h5pget_sec2_f -! NAME -! h5pget_sec2_f -! -! PURPOSE -! NOT AVAILABLE -! -! INPUTS -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! SOURCE! SUBROUTINE h5pget_sec2_f (prp_id, sec2, hdferr) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier -! INTEGER, INTENT(OUT) :: sec2 ! value indicates whether the file - !driver uses the functions declared - !in the unistd.h file -! INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_sec2_c -! hdferr = h5pget_sec2_c(prp_id, sec2) -! END SUBROUTINE h5pget_sec2_f - -!****s* H5P/h5pset_alignment_f -! NAME -! h5pset_alignment_f -! -! PURPOSE -! Sets alignment properties of a file access property list. -! -! INPUTS -! -! prp_id - file access property list identifier -! threshold - threshold value -! alignment - alignment value -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_alignment_f(prp_id, threshold, alignment, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: threshold ! Threshold value - INTEGER(HSIZE_T), INTENT(IN) :: alignment ! alignment value - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_alignment_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_alignment_c(prp_id, threshold, alignment) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ALIGNMENT_C'::h5pset_alignment_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(IN) :: threshold - INTEGER(HSIZE_T), INTENT(IN) :: alignment - END FUNCTION h5pset_alignment_c - END INTERFACE - - hdferr = h5pset_alignment_c(prp_id, threshold, alignment) - END SUBROUTINE h5pset_alignment_f - -!****s* H5P/h5pget_alignment_f -! NAME -! h5pget_alignment_f -! -! PURPOSE -! Retrieves the current settings for alignment -! properties from a file access property list. -! -! INPUTS -! prp_id - file access property list identifier -! -! OUTPUTS -! threshold - threshold value -! alignment - alignment value -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_alignment_f(prp_id, threshold, alignment, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: threshold ! Threshold value - INTEGER(HSIZE_T), INTENT(OUT) :: alignment ! alignment value - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_alignment_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_alignment_c(prp_id, threshold, alignment) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ALIGNMENT_C'::h5pget_alignment_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(OUT) :: threshold - INTEGER(HSIZE_T), INTENT(OUT) :: alignment - END FUNCTION h5pget_alignment_c - END INTERFACE - - hdferr = h5pget_alignment_c(prp_id, threshold, alignment) - END SUBROUTINE h5pget_alignment_f - -!****s* H5P/h5pset_fapl_core_f -! NAME -! h5pset_fapl_core_f -! -! PURPOSE -! Modifies the file access property list to use the -! H5FD_CORE driver. -! -! INPUTS -! prp_id - file access property list identifier -! increment - size, in bytes, of memory increments -! backing_store - boolean flag indicating whether to write -! the file contents to disk when the file is closed. -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_core_f(prp_id, increment, backing_store, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(IN) :: increment ! File block size in bytes. - LOGICAL, INTENT(IN) :: backing_store ! Flag to indicate that - ! entire file contents are flushed to a file - ! with the same name as this core file. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: backing_store_flag - -! INTEGER, EXTERNAL :: h5pset_fapl_core_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_core_c(prp_id, increment, backing_store_flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_CORE_C'::h5pset_fapl_core_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(IN) :: increment - INTEGER :: backing_store_flag - END FUNCTION h5pset_fapl_core_c - END INTERFACE - backing_store_flag = 0 - IF(backing_store) backing_store_flag = 1 - hdferr = h5pset_fapl_core_c(prp_id, increment, backing_store_flag) - END SUBROUTINE h5pset_fapl_core_f - -!****s* H5P/h5pget_fapl_core_f -! NAME -! h5pget_fapl_core_f -! -! PURPOSE -! Queries core file driver properties. -! -! INPUTS -! prp_id - file access property list identifier -! OUTPUTS -! -! increment - size, in bytes, of memory increments -! backing_store - boolean flag indicating whether to write -! the file contents to disk when the file is closed. -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_fapl_core_f(prp_id, increment, backing_store, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: increment ! File block size in bytes. - LOGICAL, INTENT(OUT) :: backing_store ! Flag to indicate that - ! entire file contents are flushed to a file - ! with the same name as this core file. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: backing_store_flag - - INTERFACE - INTEGER FUNCTION h5pget_fapl_core_c(prp_id, increment, backing_store_flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_CORE_C'::h5pget_fapl_core_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(OUT) :: increment - INTEGER :: backing_store_flag - END FUNCTION h5pget_fapl_core_c - END INTERFACE - - hdferr = h5pget_fapl_core_c(prp_id, increment, backing_store_flag) - backing_store =.FALSE. - IF (backing_store_flag .EQ. 1) backing_store =.TRUE. - END SUBROUTINE h5pget_fapl_core_f - -!****s* H5P/ h5pset_fapl_family_f -! NAME -! h5pset_fapl_family_f -! -! PURPOSE -! Sets the file access property list to use the family driver. -! -! INPUTS -! prp_id - file access property list identifier -! memb_size - size in bytes of each file member -! memb_plist - identifier of the file access property -! list to be used for each family member -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: memb_size ! Logical size, in bytes, - ! of each family member - INTEGER(HID_T), INTENT(IN) :: memb_plist ! Identifier of the file - ! access property list for - ! each member of the family - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_fapl_family_f -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_family_c(prp_id, memb_size, memb_plist) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_FAMILY_C'::h5pset_fapl_family_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(IN) :: memb_size - INTEGER(HID_T), INTENT(IN) :: memb_plist - END FUNCTION h5pset_fapl_family_c - END INTERFACE - - hdferr = h5pset_fapl_family_c(prp_id, memb_size, memb_plist) - END SUBROUTINE h5pset_fapl_family_f - -!****s* H5P/h5pget_fapl_family_f -! NAME -! h5pget_fapl_family_f -! -! PURPOSE -! Returns file access property list information. -! -! INPUTS -! prp_id - file access property list identifier -! OUTPUTS -! memb_size - size in bytes of each file member -! memb_plist - identifier of the file access property -! list to be used for each family member -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_fapl_family_f(prp_id, memb_size, memb_plist , hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: memb_size ! Logical size, in bytes, - ! of each family member - INTEGER(HID_T), INTENT(OUT) :: memb_plist ! Identifier of the file - ! access property list for - ! each member of the family - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_fapl_family_f -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_fapl_family_c(prp_id, memb_size, memb_plist) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_FAMILY_C'::h5pget_fapl_family_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(OUT) :: memb_size - INTEGER(HID_T), INTENT(OUT) :: memb_plist - END FUNCTION h5pget_fapl_family_c - END INTERFACE - - hdferr = h5pget_fapl_family_c(prp_id, memb_size, memb_plist) - END SUBROUTINE h5pget_fapl_family_f - -!****s* H5P/h5pset_cache_f -! NAME -! h5pset_cache_f -! -! PURPOSE -! Sets the meta data cache and raw data chunk -! cache parameters -! -! INPUTS -! -! prp_id - file access property list identifier -! mdc_nelmts - number of elements (objects) in the meta -! data cache -! rdcc_nelmts - number of elements (objects) in the raw -! data chunk cache -! rdcc_nbytes - total size of the raw data chunk cache, in bytes -! rdcc_w0 - preemption policy (0 or 1) -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_cache_f(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: mdc_nelmts ! Number of elements (objects) - ! in the meta data cache - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts ! Number of elements (objects) - ! in the meta data cache - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! Total size of the raw data - ! chunk cache, in bytes - REAL, INTENT(IN) :: rdcc_w0 ! Preemption policy - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_cache_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CACHE_C'::h5pset_cache_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: mdc_nelmts - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nelmts - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes - REAL, INTENT(IN) :: rdcc_w0 - END FUNCTION h5pset_cache_c - END INTERFACE - - hdferr = h5pset_cache_c(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) - END SUBROUTINE h5pset_cache_f - -!****s* H5P/h5pget_cache_f -! NAME -! h5pget_cache_f -! -! PURPOSE -! Queries the meta data cache and raw data chunk cache -! parameters. -! -! INPUTS -! prp_id - file access property list identifier -! -! OUTPUTS -! mdc_nelmts - number of elements (objects) in the meta -! data cache -! rdcc_nelmts - number of elements (objects) in the raw -! data chunk cache -! rdcc_nbytes - total size of the raw data chunk cache, in bytes -! rdcc_w0 - preemption policy (0 or 1) -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Bug fix: type of the rdcc_nelmts parameter should be INTEGER -! instead of INTEGER(SIZE_T) October 10, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pget_cache_f(prp_id, mdc_nelmts, rdcc_nelmts, rdcc_nbytes, rdcc_w0, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: mdc_nelmts ! Number of elements (objects) - ! in the meta data cache - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts ! Number of elements (objects) - ! in the meta data cache - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data - ! chunk cache, in bytes - REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_cache_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_cache_c(prp_id,mdc_nelmts,rdcc_nelmts,rdcc_nbytes,rdcc_w0) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CACHE_C'::h5pget_cache_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: mdc_nelmts - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nelmts - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes - REAL, INTENT(OUT) :: rdcc_w0 - END FUNCTION h5pget_cache_c - END INTERFACE - - hdferr = h5pget_cache_c(prp_id, mdc_nelmts,rdcc_nelmts, rdcc_nbytes, rdcc_w0 ) - END SUBROUTINE h5pget_cache_f - -!****s* H5P/h5pset_fapl_split_f -! NAME -! h5pset_fapl_split_f -! -! PURPOSE -! Emulates the old split file driver. -! -! INPUTS -! -! prp_id - file access property list identifier -! meta_ext - name of the extension for the metafile -! filename -! meta_plist - identifier of the meta file access property -! list -! raw_ext - name extension for the raw file filename -! raw_plist - identifier of the raw file access property list -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_split_f(prp_id, meta_ext, meta_plist, raw_ext, raw_plist, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: meta_ext ! Name of the extension for - ! the metafile filename - INTEGER(HID_T), INTENT(IN) :: meta_plist ! Identifier of the meta file - ! access property list - CHARACTER(LEN=*), INTENT(IN) :: raw_ext ! Name extension for the raw file filename - INTEGER(HID_T), INTENT(IN) :: raw_plist ! Identifier of the raw file - ! access property list - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: meta_len, raw_len - -! INTEGER, EXTERNAL :: h5pset_fapl_split_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_SPLIT_C'::h5pset_fapl_split_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: meta_ext - !DEC$ATTRIBUTES reference :: raw_ext - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: meta_ext - INTEGER(HID_T), INTENT(IN) :: meta_plist - CHARACTER(LEN=*), INTENT(IN) :: raw_ext - INTEGER(HID_T), INTENT(IN) :: raw_plist - INTEGER :: meta_len, raw_len - END FUNCTION h5pset_fapl_split_c - END INTERFACE - - meta_len = LEN(meta_ext) - raw_len = LEN(raw_ext) - hdferr = h5pset_fapl_split_c(prp_id,meta_len,meta_ext,meta_plist,raw_len,raw_ext,raw_plist) - END SUBROUTINE h5pset_fapl_split_f - -!****s* H5P/h5pget_split_f -! NAME -! h5pget_split_f -! -! PURPOSE -! NOT AVAILABLE -! -! INPUTS -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! SOURCE -! SUBROUTINE h5pget_split_f(prp_id, meta_ext_size, meta_ext, meta_plist,raw_ext_size,& -! raw_ext, raw_plist, hdferr) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier -! INTEGER(SIZE_T), INTENT(IN) :: meta_ext_size ! Number of characters of the meta - ! file extension to be copied to the - ! meta_ext buffer - -! CHARACTER(LEN=*), INTENT(OUT) :: meta_ext !Name of the extension for - !the metafile filename -! INTEGER(HID_T), INTENT(OUT) :: meta_plist ! Identifier of the meta file - ! access property list -! INTEGER(SIZE_T), INTENT(IN) :: raw_ext_size ! Number of characters of the raw - ! file extension to be copied to the - ! raw_ext buffer -! CHARACTER(LEN=*), INTENT(OUT) :: raw_ext !Name extension for the raw file filename -! INTEGER(HID_T), INTENT(OUT) :: raw_plist !Identifier of the raw file - !access property list -! INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_split_c -! hdferr = h5pget_split_c(prp_id, meta_ext_size, meta_ext, meta_plist, & -! raw_ext_size, raw_ext, raw_plist ) -! END SUBROUTINE h5pget_split_f - -!****s* H5P/h5pset_gc_references_f -! NAME -! h5pset_gc_references_f -! -! PURPOSE -! Sets garbage collecting references flag. -! -! INPUTS -! -! prp_id - file access property list identifier -! gc_reference - flag for stting garbage collection on -! and off (1 or 0) -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_gc_references_f (prp_id, gc_reference, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: gc_reference ! The flag for garbage collecting - ! references for the file - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_gc_references_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_gc_references_c(prp_id, gc_reference) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_GC_REFERENCES_C'::h5pset_gc_references_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: gc_reference - END FUNCTION h5pset_gc_references_c - END INTERFACE - - hdferr = h5pset_gc_references_c(prp_id, gc_reference) - END SUBROUTINE h5pset_gc_references_f - -!****s* H5P/h5pget_gc_references_f -! NAME -! h5pget_gc_references_f -! -! PURPOSE -! Returns garbage collecting references setting. -! -! INPUTS -! -! prp_id - file access property list identifier -! OUTPUTS -! -! gc_reference - flag for stting garbage collection on -! and off (1 or 0) -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_gc_references_f(prp_id, gc_reference, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: gc_reference ! The flag for garbage collecting - ! references for the file - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_gc_references_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_gc_references_c(prp_id, gc_reference) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_GC_REFERENCES_C'::h5pget_gc_references_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: gc_reference - END FUNCTION h5pget_gc_references_c - END INTERFACE - - hdferr = h5pget_gc_references_c(prp_id, gc_reference) - END SUBROUTINE h5pget_gc_references_f - -!****s* H5P/h5pset_layout_f -! NAME -! h5pset_layout_f -! -! PURPOSE -! Sets the type of storage used store the raw data -! for a dataset. -! -! INPUTS -! -! prp_id - data creation property list identifier -! layout - type of storage layout for raw data -! possible values are: -! H5D_COMPACT_F -! H5D_CONTIGUOUS_F -! H5D_CHUNKED_F -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_layout_f (prp_id, layout, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: layout ! Type of storage layout for raw data - ! possible values are: - ! H5D_COMPACT_F - ! H5D_CONTIGUOUS_F - ! H5D_CHUNKED_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_layout_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_layout_c(prp_id, layout) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LAYOUT_C'::h5pset_layout_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: layout - END FUNCTION h5pset_layout_c - END INTERFACE - - hdferr = h5pset_layout_c(prp_id, layout) - END SUBROUTINE h5pset_layout_f - -!****s* H5P/h5pget_layout_f -! NAME -! h5pget_layout_f -! -! PURPOSE -! Returns the layout of the raw data for a dataset. -! -! INPUTS -! -! prp_id - data creation property list identifier -! OUTPUTS -! -! layout - type of storage layout for raw data -! possible values are: -! H5D_COMPACT_F -! H5D_CONTIGUOUS_F -! H5D_CHUNKED_F -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_layout_f (prp_id, layout, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: layout ! Type of storage layout for raw data - ! possible values are: - ! H5D_COMPACT_F(0) - ! H5D_CONTIGUOUS_F(1) - ! H5D_CHUNKED_F(2) - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_layout_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_layout_c(prp_id, layout) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LAYOUT_C'::h5pget_layout_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: layout - END FUNCTION h5pget_layout_c - END INTERFACE - - hdferr = h5pget_layout_c(prp_id, layout) - END SUBROUTINE h5pget_layout_f - -!****s* H5P/h5pset_filter_f -! NAME -! h5pset_filter_f -! -! PURPOSE -! Adds a filter to the filter pipeline. -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! filter - filter to be added to the pipeline -! flags - bit vector specifying certain general -! properties of the filter -! cd_nelmts - number of elements in cd_values -! cd_values - auxiliary data for the filter -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! February, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: filter ! Filter to be added to the pipeline. - INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general - ! properties of the filter. - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values. - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_filter_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILTER_C'::h5pset_filter_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(IN) :: flags - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values - END FUNCTION h5pset_filter_c - END INTERFACE - - hdferr = h5pset_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) - END SUBROUTINE h5pset_filter_f - -!****s* H5P/h5pget_nfilters_f -! NAME -! h5pget_nfilters_f -! -! PURPOSE -! Returns the number of filters in the pipeline. -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! OUTPUTS -! -! nfilters - number of filters in the pipeline -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_nfilters_f (prp_id, nfilters, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: nfilters ! The number of filters in the pipeline - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_nfilters_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_nfilters_c(prp_id, nfilters) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NFILTERS_C'::h5pget_nfilters_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: nfilters - END FUNCTION h5pget_nfilters_c - END INTERFACE - - hdferr = h5pget_nfilters_c(prp_id, nfilters) - END SUBROUTINE h5pget_nfilters_f - -!****s* H5P/h5pget_filter_f -! NAME -! h5pget_filter_f -! -! PURPOSE -! Returns information about a filter in a pipeline -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! filter_number - sequence number within the filter -! pipeline of the filter for which -! information is sought -! OUTPUTS -! -! filter_id - filter identification number -! flags - bit vector specifying certain general -! properties of the filter -! cd_nelmts - number of elements in cd_values -! cd_values - auxiliary data for the filter -! namelen - number of characters in the name buffer -! name - buffer to retrieve filter name -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_filter_f(prp_id, filter_number, flags, cd_nelmts, cd_values, namelen, name, filter_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: filter_number ! Sequence number within the filter - ! pipeline of the filter for which - ! information is sought - INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. - INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general - ! properties of the filter. - INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. - INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. - CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter - INTEGER, INTENT(OUT) :: filter_id ! Filter identification number - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - -! INTEGER, EXTERNAL :: h5pget_filter_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & - cd_values, namelen, name, filter_id ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILTER_C'::h5pget_filter_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter_number - INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values - INTEGER, INTENT(OUT) :: flags - INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts - INTEGER(SIZE_T), INTENT(IN) :: namelen - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER, INTENT(OUT) :: filter_id - END FUNCTION h5pget_filter_c - END INTERFACE - - hdferr = h5pget_filter_c(prp_id, filter_number, flags, cd_nelmts, & - cd_values, namelen, name, filter_id ) - END SUBROUTINE h5pget_filter_f - -!****s* H5P/h5pset_external_f -! NAME -! h5pset_external_f -! -! PURPOSE -! Adds an external file to the list of external files. -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! name - name of external file -! offset - offset in bytes from the beginning of the -! file to the location in the file -! where the data starts -! bytes - size of the external file data. -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5pset_external_f(prp_id, name, offset, bytes, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of an external file - INTEGER(OFF_T), INTENT(IN) :: offset ! Offset, in bytes, from the beginning - ! of the file to the location in the file - ! where the data starts. - INTEGER(HSIZE_T), INTENT(IN) :: bytes ! Number of bytes reserved in the - ! file for the data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5pset_external_c(prp_id, name,namelen, offset, bytes) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EXTERNAL_C'::h5pset_external_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(OFF_T), INTENT(IN) :: offset - INTEGER(HSIZE_T), INTENT(IN) :: bytes - END FUNCTION h5pset_external_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5pset_external_c(prp_id, name, namelen, offset, bytes) - END SUBROUTINE h5pset_external_f - -!****s* H5P/h5pget_external_count_f -! NAME -! h5pget_external_count_f -! -! PURPOSE -! Returns the number of external files for a dataset. -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! OUTPUTS -! -! count - number of external files for the -! specified dataset -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_external_count_f (prp_id, count, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: count ! Number of external files for the - ! Specified dataset - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! INTEGER, EXTERNAL :: h5pget_external_count_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_external_count_c(prp_id, count) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EXTERNAL_COUNT_C'::h5pget_external_count_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: count - END FUNCTION h5pget_external_count_c - END INTERFACE - - hdferr = h5pget_external_count_c(prp_id, count) - END SUBROUTINE h5pget_external_count_f - -!****s* H5P/h5pget_external_f -! NAME -! h5pget_external_f -! -! PURPOSE -! Returns information about an external file. -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! OUTPUTS -! -! idx - external file index -! name_size - maximum size of name array -! name - name of the external file -! name - name of external file -! offset - offset in bytes from the beginning of the -! file to the location in the file -! where the data starts -! bytes - size of the external file data -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Changed type of 'offset' from integer to off_t -- MSB January 9, 2012 -! -! Fortran90 Interface: - SUBROUTINE h5pget_external_f(prp_id, idx, name_size, name, offset,bytes, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: idx ! External file index. - INTEGER(SIZE_T), INTENT(IN) :: name_size ! Maximum length of name array - CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of an external file - INTEGER(OFF_T), INTENT(OUT) :: offset ! Offset, in bytes, from the beginning - ! of the file to the location in the file - ! where the data starts. - INTEGER(HSIZE_T), INTENT(OUT) :: bytes ! Number of bytes reserved in the - ! file for the data - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_external_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EXTERNAL_C'::h5pget_external_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: idx - INTEGER(SIZE_T), INTENT(IN) :: name_size - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER(OFF_T), INTENT(OUT) :: offset - INTEGER(HSIZE_T), INTENT(OUT) :: bytes - END FUNCTION h5pget_external_c - END INTERFACE - - hdferr = h5pget_external_c(prp_id, idx, name_size, name, offset, bytes) - END SUBROUTINE h5pget_external_f - -!****s* H5P/h5pset_btree_ratios_f -! NAME -! h5pset_btree_ratios_f -! -! PURPOSE -! Sets B-tree split ratios for a dataset transfer -! property list. -! -! INPUTS -! -! prp_id - the dataset transfer property list -! identifier -! left - the B-tree split ratio for left-most nodes -! middle - the B-tree split ratio for all other nodes -! right - the B-tree split ratio for right-most nodes -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pset_btree_ratios_f(prp_id, left, middle, right, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - REAL, INTENT(IN) :: left ! The B-tree split ratio for left-most nodes. - REAL, INTENT(IN) :: middle ! The B-tree split ratio for all other nodes - REAL, INTENT(IN) :: right ! The B-tree split ratio for right-most - ! nodes and lone nodes. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_btree_ratios_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_btree_ratios_c(prp_id, left, middle, right) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_BTREE_RATIOS_C'::h5pset_btree_ratios_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - REAL, INTENT(IN) :: left - REAL, INTENT(IN) :: middle - REAL, INTENT(IN) :: right - END FUNCTION h5pset_btree_ratios_c - END INTERFACE - - hdferr = h5pset_btree_ratios_c(prp_id, left, middle, right) - END SUBROUTINE h5pset_btree_ratios_f - -!****s* H5P/h5pget_btree_ratios_f -! NAME -! h5pget_btree_ratios_f -! -! PURPOSE -! Gets B-tree split ratios for a dataset transfer property list -! -! INPUTS -! -! prp_id - the dataset transfer property list -! identifier -! OUTPUTS -! -! left - the B-tree split ratio for left-most nodes -! middle - the B-tree split ratio for all other nodes -! right - the B-tree split ratio for right-most nodes -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Fortran90 Interface: - SUBROUTINE h5pget_btree_ratios_f(prp_id, left, middle, right, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - REAL, INTENT(OUT) :: left ! The B-tree split ratio for left-most nodes. - REAL, INTENT(OUT) :: middle ! The B-tree split ratio for all other nodes - REAL, INTENT(OUT) :: right ! The B-tree split ratio for right-most - ! nodes and lone nodes. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - -! INTEGER, EXTERNAL :: h5pget_btree_ratios_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_btree_ratios_c(prp_id, left, middle, right) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_BTREE_RATIOS_C'::h5pget_btree_ratios_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - REAL, INTENT(OUT) :: left - REAL, INTENT(OUT) :: middle - REAL, INTENT(OUT) :: right - END FUNCTION h5pget_btree_ratios_c - END INTERFACE - - hdferr = h5pget_btree_ratios_c(prp_id, left, middle, right) - END SUBROUTINE h5pget_btree_ratios_f - -!****s* H5P/h5pget_fclose_degree_f -! NAME -! h5pget_fclose_degree_f -! -! PURPOSE -! Returns the degree for the file close behavior. -! -! INPUTS -! -! fapl_id - File access property list identifier -! OUTPUTS -! -! degree - Possible values are: -! H5F_CLOSE_DEFAULT_F -! H5F_CLOSE_WEAK_F -! H5F_CLOSE_SEMI_F -! H5F_CLOSE_STRONG_F -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! September 26, 2002 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pget_fclose_degree_f(fapl_id, degree, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier - INTEGER, INTENT(OUT) :: degree ! Possible values are: - ! H5F_CLOSE_DEFAULT_F - ! H5F_CLOSE_WEAK_F - ! H5F_CLOSE_SEMI_F - ! H5F_CLOSE_STRONG_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_fclose_degree_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_fclose_degree_c(fapl_id, degree) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FCLOSE_DEGREE_C'::h5pget_fclose_degree_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: fapl_id - INTEGER, INTENT(OUT) :: degree - END FUNCTION h5pget_fclose_degree_c - END INTERFACE - - hdferr = h5pget_fclose_degree_c(fapl_id, degree) - END SUBROUTINE h5pget_fclose_degree_f - -!****s* H5P/h5pset_fclose_degree_f -! NAME -! h5pset_fclose_degree_f -! -! PURPOSE -! Sets the degree for the file close behavior. -! -! INPUTS -! -! fapl_id - file access property list identifier -! degree - Possible values are: -! H5F_CLOSE_DEFAULT_F -! H5F_CLOSE_WEAK_F -! H5F_CLOSE_SEMI_F -! H5F_CLOSE_STRONG_F -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! September 26, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fclose_degree_f(fapl_id, degree, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File Access Property list identifier - INTEGER, INTENT(IN) :: degree ! Possible values are: - ! H5F_CLOSE_DEFAULT_F - ! H5F_CLOSE_WEAK_F - ! H5F_CLOSE_SEMI_F - ! H5F_CLOSE_STRONG_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_fclose_degree_c(fapl_id, degree) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FCLOSE_DEGREE_C'::h5pset_fclose_degree_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: fapl_id - INTEGER, INTENT(IN) :: degree - END FUNCTION h5pset_fclose_degree_c - END INTERFACE - - hdferr = h5pset_fclose_degree_c(fapl_id, degree) - END SUBROUTINE h5pset_fclose_degree_f - -!****s* H5P/h5pequal_f -! NAME -! h5pequal_f -! -! PURPOSE -! Checks if two property lists are eqaul -! -! INPUTS -! -! plist1_id - property list identifier -! plist2_id - property list identifier -! OUTPUTS -! -! flag - flag, possible values -! .TRUE. or .FALSE. -! hdferr: - error code -! Success: 0 -! Failure: -1, flag is set to .FALSE. -! -! AUTHOR -! Elena Pourmal -! September 30, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pequal_f(plist1_id, plist2_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist1_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: plist2_id ! Property list identifier - LOGICAL, INTENT(OUT) :: flag ! Flag - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: c_flag - - INTERFACE - INTEGER FUNCTION h5pequal_c(plist1_id, plist2_id, c_flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PEQUAL_C'::h5pequal_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist1_id - INTEGER(HID_T), INTENT(IN) :: plist2_id - INTEGER, INTENT(OUT) :: c_flag - END FUNCTION h5pequal_c - END INTERFACE - - flag = .FALSE. - hdferr = h5pequal_c(plist1_id, plist2_id, c_flag) - IF (c_flag .GT. 0) flag = .TRUE. - END SUBROUTINE h5pequal_f - -!****s* H5P/h5pset_buffer_f -! NAME -! h5pset_buffer_f -! -! PURPOSE -! Sets sixe for conversion buffer -! -! INPUTS -! plist_id - data transfer property list identifier -! size - buffer size -! OUTPUTS -! -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 2, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_buffer_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Buffer size in bytes; - ! buffer is allocated and freed by - ! the library. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_buffer_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_BUFFER_C'::h5pset_buffer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_buffer_c - END INTERFACE - - hdferr = h5pset_buffer_c(plist_id, size) - END SUBROUTINE h5pset_buffer_f - -!****s* H5P/h5pget_buffer_f -! NAME -! h5pget_buffer_f -! -! PURPOSE -! Gets size for conversion buffer -! -! INPUTS -! -! plist_id - data transfer property list identifier -! OUTPUTS -! -! size - buffer size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 2, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_buffer_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Data transfer property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Buffer size in bytes; - ! buffer is allocated and freed by - ! the library. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_buffer_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_BUFFER_C'::h5pget_buffer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_buffer_c - END INTERFACE - - hdferr = h5pget_buffer_c(plist_id, size) - END SUBROUTINE h5pget_buffer_f - -!****s* H5P/h5pfill_value_defined_f -! NAME -! h5pfill_value_defined_f -! -! PURPOSE -! Check if fill value is defined. -! -! INPUTS -! -! plist_id - dataset creation property list identifier -! OUTPUTS -! -! flag - fill value status flag -! Possible values are: -! H5D_FILL_VALUE_ERROR_F -! H5D_FILL_VALUE_UNDEFINED_F -! H5D_FILL_VALUE_DEFAULT_F -! H5D_FILL_VALUE_USER_DEFINED_F -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 4, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pfill_value_defined_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier - INTEGER, INTENT(OUT) :: flag ! Fill value status flag - ! H5D_FILL_VALUE_ERROR_F - ! H5D_FILL_VALUE_UNDEFINED_F - ! H5D_FILL_VALUE_DEFAULT_F - ! H5D_FILL_VALUE_USER_DEFINED_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pfill_value_defined_c(plist_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PFILL_VALUE_DEFINED_C'::h5pfill_value_defined_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(OUT) :: flag - END FUNCTION h5pfill_value_defined_c - END INTERFACE - - hdferr = h5pfill_value_defined_c(plist_id, flag) - END SUBROUTINE h5pfill_value_defined_f - -!****s* H5P/h5pset_alloc_time_f -! NAME -! h5pset_alloc_time_f -! -! PURPOSE -! Set space allocation time for dataset during creation. -! -! INPUTS -! -! plist_id - dataset creation property list identifier -! flag - allocation time flag: -! H5D_ALLOC_TIME_ERROR_F -! H5D_ALLOC_TIME_DEFAULT_F -! H5D_ALLOC_TIME_EARLY_F -! H5D_ALLOC_TIME_LATE_F -! H5D_ALLOC_TIME_INCR_F -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 4, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_alloc_time_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier - INTEGER, INTENT(IN) :: flag ! Allocation time flag: - ! H5D_ALLOC_TIME_ERROR_F - ! H5D_ALLOC_TIME_DEFAULT_F - ! H5D_ALLOC_TIME_EARLY_F - ! H5D_ALLOC_TIME_LATE_F - ! H5D_ALLOC_TIME_INCR_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_alloc_time_c(plist_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ALLOC_TIME_C'::h5pset_alloc_time_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(IN) :: flag - END FUNCTION h5pset_alloc_time_c - END INTERFACE - - hdferr = h5pset_alloc_time_c(plist_id, flag) - END SUBROUTINE h5pset_alloc_time_f - -!****s* H5P/h5pget_alloc_time_f -! NAME -! h5pget_alloc_time_f -! -! PURPOSE -! Get space allocation time for dataset during creation. -! -! INPUTS -! -! plist_id - dataset creation property list identifier -! OUTPUTS -! -! flag - allocation time flag: -! H5D_ALLOC_TIME_ERROR_F -! H5D_ALLOC_TIME_DEFAULT_F -! H5D_ALLOC_TIME_EARLY_F -! H5D_ALLOC_TIME_LATE_F -! H5D_ALLOC_TIME_INCR_F -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 4, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_alloc_time_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier - INTEGER, INTENT(OUT) :: flag ! Allocation time flag: - ! H5D_ALLOC_TIME_ERROR_F - ! H5D_ALLOC_TIME_DEFAULT_F - ! H5D_ALLOC_TIME_EARLY_F - ! H5D_ALLOC_TIME_LATE_F - ! H5D_ALLOC_TIME_INCR_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_alloc_time_c(plist_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ALLOC_TIME_C'::h5pget_alloc_time_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(OUT) :: flag - END FUNCTION h5pget_alloc_time_c - END INTERFACE - - hdferr = h5pget_alloc_time_c(plist_id, flag) - END SUBROUTINE h5pget_alloc_time_f - -!****s* H5P/h5pset_fill_time_f -! NAME -! h5pset_fill_time_f -! -! PURPOSE -! Set fill value writing time for dataset -! -! INPUTS -! -! plist_id - dataset creation property list identifier -! flag - fill time flag: -! H5D_FILL_TIME_ERROR_F -! H5D_FILL_TIME_ALLOC_F -! H5D_FILL_TIME_NEVER_F -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 4, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fill_time_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier - INTEGER, INTENT(IN) :: flag ! Fill time flag: - ! H5D_FILL_TIME_ERROR_F - ! H5D_FILL_TIME_ALLOC_F - ! H5D_FILL_TIME_NEVER_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_fill_time_c(plist_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_TIME_C'::h5pset_fill_time_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(IN) :: flag - END FUNCTION h5pset_fill_time_c - END INTERFACE - - hdferr = h5pset_fill_time_c(plist_id, flag) - END SUBROUTINE h5pset_fill_time_f - -!****s* H5P/h5pget_fill_time_f -! NAME -! h5pget_fill_time_f -! -! PURPOSE -! Get fill value writing time for dataset -! -! INPUTS -! -! plist_id - dataset creation property list identifier -! OUTPUTS -! -! hdferr: - error code -! Success: 0 -! Failure: -1 -! OPTIONAL PARAMETERS -! -! flag - fill time flag: -! H5D_FILL_TIME_ERROR_F -! H5D_FILL_TIME_ALLOC_F -! H5D_FILL_TIME_NEVER_F -! AUTHOR -! Elena Pourmal -! October 4, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_fill_time_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property list identifier - INTEGER, INTENT(OUT) :: flag ! Fill time flag: - ! H5D_FILL_TIME_ERROR_F - ! H5D_FILL_TIME_ALLOC_F - ! H5D_FILL_TIME_NEVER_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_fill_time_c(plist_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_TIME_C'::h5pget_fill_time_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(OUT) :: flag - END FUNCTION h5pget_fill_time_c - END INTERFACE - - hdferr = h5pget_fill_time_c(plist_id, flag) - END SUBROUTINE h5pget_fill_time_f - -!****s* H5P/ h5pset_meta_block_size_f -! NAME -! h5pset_meta_block_size_f -! -! PURPOSE -! Sets the minimum size of metadata block allocations -! -! INPUTS -! -! plist_id - file access property list identifier -! size - metatdata block size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_meta_block_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Block size in bytes; - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pset_meta_block_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_META_BLOCK_SIZE_C'::h5pset_meta_block_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_meta_block_size_c - END INTERFACE - - hdferr = h5pset_meta_block_size_c(plist_id, size) - END SUBROUTINE h5pset_meta_block_size_f - -!****s* H5P/h5pget_meta_block_size_f -! NAME -! h5pget_meta_block_size_f -! -! PURPOSE -! Gets the minimum size of metadata block allocations -! -! INPUTS -! -! plist_id - file access property list identifier -! OUTPUTS -! -! size - metatdata block size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_meta_block_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Block size in bytes; - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pget_meta_block_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_META_BLOCK_SIZE_C'::h5pget_meta_block_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_meta_block_size_c - END INTERFACE - - hdferr = h5pget_meta_block_size_c(plist_id, size) - END SUBROUTINE h5pget_meta_block_size_f - -!****s* H5P/h5pset_sieve_buf_size_f -! NAME -! h5pset_sieve_buf_size_f -! -! PURPOSE -! Sets the maximum size of the data sieve buffer -! -! INPUTS -! -! plist_id - file access property list identifier -! size - sieve buffer size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_sieve_buf_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(IN) :: size ! Buffer size in bytes; - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_sieve_buf_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SIEVE_BUF_SIZE_C'::h5pset_sieve_buf_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(SIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_sieve_buf_size_c - END INTERFACE - - hdferr = h5pset_sieve_buf_size_c(plist_id, size) - END SUBROUTINE h5pset_sieve_buf_size_f - -!****s* H5P/h5pget_sieve_buf_size_f -! NAME -! h5pget_sieve_buf_size_f -! -! PURPOSE -! Gets the maximum size of the data sieve buffer -! -! INPUTS -! -! plist_id - file access property list identifier -! OUTPUTS -! -! size - sieve buffer size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_sieve_buf_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: size ! Buffer size in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_sieve_buf_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIEVE_BUF_SIZE_C'::h5pget_sieve_buf_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(SIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_sieve_buf_size_c - END INTERFACE - - hdferr = h5pget_sieve_buf_size_c(plist_id, size) - END SUBROUTINE h5pget_sieve_buf_size_f - -!****s* H5P/h5pset_small_data_block_size_f -! NAME -! h5pset_small_data_block_size_f -! -! PURPOSE -! Sets the minimum size of "small" raw data block -! -! INPUTS -! -! plist_id - file access property list identifier -! size - small raw data block size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_small_data_block_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: size ! Small raw data block size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_small_data_block_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SMALL_DATA_BLOCK_SIZE_C'::h5pset_small_data_block_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_small_data_block_size_c - END INTERFACE - - hdferr = h5pset_small_data_block_size_c(plist_id, size) - END SUBROUTINE h5pset_small_data_block_size_f - -!****s* H5P/h5pget_small_data_block_size_f -! NAME -! h5pget_small_data_block_size_f -! -! PURPOSE -! Gets the minimum size of "small" raw data block -! -! INPUTS -! -! plist_id - file access property list identifier -! OUTPUTS -! -! size - small raw data block size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_small_data_block_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File access property list identifier - INTEGER(HSIZE_T), INTENT(OUT) :: size ! Small raw data block size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_small_data_block_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SMALL_DATA_BLOCK_SIZE_C'::h5pget_small_data_block_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(HSIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_small_data_block_size_c - END INTERFACE - - hdferr = h5pget_small_data_block_size_c(plist_id, size) - END SUBROUTINE h5pget_small_data_block_size_f - -!****s* H5P/h5pset_hyper_vector_size_f -! NAME -! h5pset_hyper_vector_size_f -! -! PURPOSE -! Set the number of "I/O" vectors (vector size) -! -! INPUTS -! -! plist_id - dataset transfer property list identifier -! size - vector size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pset_hyper_vector_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier - INTEGER(SIZE_T), INTENT(IN) :: size ! Vector size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_hyper_vector_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_HYPER_VECTOR_SIZE_C'::h5pset_hyper_vector_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(SIZE_T), INTENT(IN) :: size - END FUNCTION h5pset_hyper_vector_size_c - END INTERFACE - - hdferr = h5pset_hyper_vector_size_c(plist_id, size) - END SUBROUTINE h5pset_hyper_vector_size_f - -!****s* H5P/ h5pget_hyper_vector_size_f -! NAME -! h5pget_hyper_vector_size_f -! -! PURPOSE -! Get the number of "I/O" vectors (vector size) -! -! INPUTS -! -! plist_id - dataset transfer property list identifier -! OUTPUTS -! -! size - vector size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_hyper_vector_size_f(plist_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset transfer property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: size ! Vector size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_hyper_vector_size_c(plist_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_HYPER_VECTOR_SIZE_C'::h5pget_hyper_vector_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER(SIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_hyper_vector_size_c - END INTERFACE - - hdferr = h5pget_hyper_vector_size_c(plist_id, size) - END SUBROUTINE h5pget_hyper_vector_size_f - -!****s* H5P/h5pexist_f -! NAME -! h5pexist_f -! -! PURPOSE -! Queries whether a property name exists in a property list or class. -! -! INPUTS -! -! prp_id - property list identifier to query -! name - name of property to check for -! OUTPUTS -! -! flag - logical flag -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pexist_f(prp_id, name, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - LOGICAL, INTENT(OUT) :: flag ! .TRUE. if exists, .FALSE. otherwise - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pexist_c(prp_id, name, name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PEXIST_C'::h5pexist_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - END FUNCTION h5pexist_c - END INTERFACE - flag = .FALSE. - name_len = LEN(name) - hdferr = h5pexist_c(prp_id, name , name_len) - IF (hdferr > 0) THEN - flag = .TRUE. - hdferr = 0 - ENDIF - END SUBROUTINE h5pexist_f - -!****s* H5P/h5pget_size_f -! -! NAME -! h5pget_size_f -! -! PURPOSE -! Queries the size of a property value in bytes. -! -! INPUTS -! -! prp_id - property list identifier to query -! name - name of property to query -! OUTPUTS -! -! size - size of property in bytes -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pget_size_f(prp_id, name, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to query - INTEGER(SIZE_T), INTENT(OUT) :: size ! Size in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pget_size_c(prp_id, name, name_len, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_SIZE_C'::h5pget_size_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(OUT) :: size - END FUNCTION h5pget_size_c - END INTERFACE - name_len = LEN(name) - hdferr = h5pget_size_c(prp_id, name , name_len, size) - END SUBROUTINE h5pget_size_f - -!****s* H5P/h5pget_npros_f -! NAME -! h5pget_npros_f -! -! PURPOSE -! Queries number of properties in property list or class -! -! INPUTS -! -! prp_id - iproperty list identifier to query -! OUTPUTS -! -! nprops - number of properties in property object -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_nprops_f(prp_id, nprops, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: nprops ! Number of properties - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_nprops_c(prp_id, nprops) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NPROPS_C'::h5pget_nprops_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(SIZE_T), INTENT(OUT) :: nprops - END FUNCTION h5pget_nprops_c - END INTERFACE - hdferr = h5pget_nprops_c(prp_id, nprops) - END SUBROUTINE h5pget_nprops_f - -!****s* H5P/h5pget_class_name_f -! NAME -! h5pget_class_name_f -! -! PURPOSE -! Queries the name of a class. -! -! INPUTS -! -! prp_id - property list identifier to query -! OUTPUTS -! -! name - name of a class -! size - Actual length of the class name -! NOTE: If provided buffer "name" is smaller, -! than name will be truncated to fit into -! provided user buffer. -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! HISTORY -! Returned the size of name as an argument -! -! Fortran90 Interface: - SUBROUTINE h5pget_class_name_f(prp_id, name, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(OUT) :: name ! Buffer to retireve class name - INTEGER, INTENT(OUT) :: size ! Actual length of the class name - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pget_class_name_c(prp_id, name, name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_NAME_C'::h5pget_class_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(INOUT) :: name - INTEGER, INTENT(IN) :: name_len - END FUNCTION h5pget_class_name_c - END INTERFACE - - name_len = LEN(name) - size = h5pget_class_name_c(prp_id, name, name_len) - - hdferr = 0 - IF(size.LT.0) hdferr = -1 - - END SUBROUTINE h5pget_class_name_f - -!****s* H5P/h5pget_class_parent_f -! NAME -! h5pget_class_parent_f -! -! PURPOSE -! Retrieves the parent class of a genric property class. -! -! INPUTS -! -! prp_id - property list identifier to query -! OUTPUTS -! -! parent_id - identifier of the parent class -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pget_class_parent_f(prp_id, parent_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(OUT) :: parent_id ! Parent class property list - ! identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pget_class_parent_c(prp_id, parent_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CLASS_PARENT_C'::h5pget_class_parent_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(OUT) :: parent_id - END FUNCTION h5pget_class_parent_c - END INTERFACE - hdferr = h5pget_class_parent_c(prp_id, parent_id) - END SUBROUTINE h5pget_class_parent_f - -!****s* H5P/h5pisa_class_f -! NAME -! h5pisa_class_f -! -! PURPOSE -! Determines whether a property list is a member of a class. -! -! INPUTS -! -! plist - property list identifier -! pclass - identifier of the property class -! OUTPUTS -! -! flag - .TRUE. if a member, .FALSE. otherwise -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pisa_class_f(plist, pclass, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: pclass ! Class identifier - LOGICAL, INTENT(OUT) :: flag ! logical flag - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pisa_class_c(plist, pclass) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PISA_CLASS_C'::h5pisa_class_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist - INTEGER(HID_T), INTENT(IN) :: pclass - END FUNCTION h5pisa_class_c - END INTERFACE - flag = .FALSE. - hdferr = h5pisa_class_c(plist, pclass) - IF (hdferr .GT. 0) THEN - flag = .TRUE. - hdferr = 0 - ENDIF - END SUBROUTINE h5pisa_class_f - -!****s* H5P/h5pcopy_prop_f -! NAME -! h5pcopy_prop_f -! -! PURPOSE -! Copies a property from one list or class to another. -! -! INPUTS -! -! dst_id - Identifier of the destination property list -! src_id - Identifier of the source property list -! name - name of the property to copy -! OUTPUTS -! -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pcopy_prop_f(dst_id, src_id, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dst_id ! Destination property list - ! identifier - INTEGER(HID_T), INTENT(IN) :: src_id ! Source property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Property name - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pcopy_prop_c(dst_id, src_id, name, name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCOPY_PROP_C'::h5pcopy_prop_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: dst_id - INTEGER(HID_T), INTENT(IN) :: src_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - END FUNCTION h5pcopy_prop_c - END INTERFACE - name_len = LEN(name) - hdferr = h5pcopy_prop_c(dst_id, src_id, name , name_len) - END SUBROUTINE h5pcopy_prop_f - -!****s* H5P/h5premove_f -! NAME -! h5premove_f -! -! PURPOSE -! Removes a property from a property list. - -! -! INPUTS -! -! plid - Property list identofoer -! name - name of the property to remove -! OUTPUTS -! -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5premove_f(plid, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plid ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to remove - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5premove_c(plid, name, name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREMOVE_C'::h5premove_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: plid - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - END FUNCTION h5premove_c - END INTERFACE - name_len = LEN(name) - hdferr = h5premove_c(plid, name , name_len) - END SUBROUTINE h5premove_f - -!****s* H5P/h5punregister_f -! NAME -! h5punregister_f -! -! PURPOSE -! Removes a property from a property list class. -! -! INPUTS -! -! class - Property list class identifier -! name - name of the property to remove -! OUTPUTS -! -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5punregister_f(class, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! name of property to remove - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5punregister_c(class, name, name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PUNREGISTER_C'::h5punregister_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - END FUNCTION h5punregister_c - END INTERFACE - name_len = LEN(name) - hdferr = h5punregister_c(class, name , name_len) - END SUBROUTINE h5punregister_f - -!****s* H5P/h5pclose_class_f -! NAME -! h5pclose_class_f -! -! PURPOSE -! Closes an existing property list class. -! -! INPUTS -! -! class - Property list class identifier -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5pclose_class_f(class, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pclose_class_c(class) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCLOSE_CLASS_C'::h5pclose_class_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: class - END FUNCTION h5pclose_class_c - END INTERFACE - hdferr = h5pclose_class_c(class) - END SUBROUTINE h5pclose_class_f - -!****s* H5P/h5pset_shuffle_f -! NAME -! h5pset_shuffle_f -! -! PURPOSE -! Sets shuffling filter -! -! INPUTS -! prp_id - dataset creation property list identifier -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_shuffle_f(prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_shuffle_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_shuffle_c(prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHUFFLE_C'::h5pset_shuffle_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - END FUNCTION h5pset_shuffle_c - END INTERFACE - hdferr = h5pset_shuffle_c(prp_id) - - END SUBROUTINE h5pset_shuffle_f - -!****s* H5P/h5pset_edc_check_f -! NAME -! h5pset_edc_check_f -! -! PURPOSE -! Enables/disables error detecting -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! flag - EDC flag; possible values: -! H5Z_DISABLE_EDC_F -! H5Z_ENABLE_EDC_F -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 13, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_edc_check_f(prp_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: flag ! Checksum filter flag - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_edc_check_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_edc_check_c(prp_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EDC_CHECK_C'::h5pset_edc_check_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: flag - END FUNCTION h5pset_edc_check_c - END INTERFACE - hdferr = h5pset_edc_check_c(prp_id, flag) - - END SUBROUTINE h5pset_edc_check_f - -!****s* H5P/h5pget_edc_check_f -! NAME -! h5pget_edc_check_f -! -! PURPOSE -! Queries error detecting -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 13, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pget_edc_check_f(prp_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset transfer property list identifier - INTEGER, INTENT(OUT) :: flag ! Checksum filter flag - ! May have one of the following values: - ! H5Z_ERROR_EDC_F - ! H5Z_DISABLE_EDC_F - ! H5Z_ENABLE_EDC_F - ! H5Z_NO_EDC_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pget_edc_check_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_edc_check_c(prp_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EDC_CHECK_C'::h5pget_edc_check_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(OUT) :: flag - END FUNCTION h5pget_edc_check_c - END INTERFACE - hdferr = h5pget_edc_check_c(prp_id, flag) - - END SUBROUTINE h5pget_edc_check_f - -!****s* H5P/h5pset_fletcher32_f -! NAME -! h5pset_fletcher32_f -! -! PURPOSE -! Sets Fletcher32 checksum of EDC for a dataset creation -! property list. -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 13, 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fletcher32_f(prp_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_fletcher32_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fletcher32_c(prp_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FLETCHER32_C'::h5pset_fletcher32_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - END FUNCTION h5pset_fletcher32_c - END INTERFACE - hdferr = h5pset_fletcher32_c(prp_id) - - END SUBROUTINE h5pset_fletcher32_f - -!****s* H5P/ h5pset_family_offset_f -! NAME -! h5pset_family_offset_f -! -! PURPOSE -! Sets offset for family file driver. -! -! INPUTS -! -! prp_id - file creation property list identifier -! offset - file offset -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! 19 March 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_family_offset_f(prp_id, offset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HSIZE_T), INTENT(IN) :: offset ! Offset in bytes - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_family_offset_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_family_offset_c(prp_id, offset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAMILY_OFFSET_C'::h5pset_family_offset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HSIZE_T), INTENT(IN) :: offset - END FUNCTION h5pset_family_offset_c - END INTERFACE - hdferr = h5pset_family_offset_c(prp_id, offset) - - END SUBROUTINE h5pset_family_offset_f - -!****s* H5P/h5pset_fapl_multi_l -! NAME -! h5pset_fapl_multi_l -! -! PURPOSE -! Sets up use of the multi-file driver. -! -! INPUTS -! -! prp_id - file creation property list identifier -! mem_map - mapping array -! memb_fapl - property list for each memory usage type -! memb_name - names of member file -! relax - flag -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! 20 March 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_multi_l(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, DIMENSION(*), INTENT(IN) :: memb_map - INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl - CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name - REAL, DIMENSION(*), INTENT(IN) :: memb_addr - LOGICAL, INTENT(IN) :: relax - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm - INTEGER :: maxlen - INTEGER :: flag = 0 - INTEGER :: i - - INTERFACE - INTEGER FUNCTION h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & - maxlen, memb_addr, flag) - USE H5GLOBAL - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_MULTI_C'::h5pset_fapl_multi_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: memb_name - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, DIMENSION(*), INTENT(IN) :: memb_map - INTEGER(HID_T), DIMENSION(*), INTENT(IN) :: memb_fapl - CHARACTER(LEN=*), DIMENSION(*), INTENT(IN) :: memb_name - REAL, DIMENSION(*), INTENT(IN) :: memb_addr - INTEGER, DIMENSION(*) :: lenm - INTEGER :: maxlen - INTEGER, INTENT(IN) :: flag - END FUNCTION h5pset_fapl_multi_c - END INTERFACE - - maxlen = LEN(memb_name(1)) - DO i=1, H5FD_MEM_NTYPES_F - lenm(i) = LEN_TRIM(memb_name(i)) - ENDDO - IF(relax) flag = 1 - hdferr = h5pset_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag) - - END SUBROUTINE h5pset_fapl_multi_l -!****s* H5P/h5pset_fapl_multi_s -! NAME -! h5pset_fapl_multi_s -! -! PURPOSE -! Sets up use of the multi-file driver. -! -! INPUTS -! -! prp_id - file creation property list identifier -! relax - flag -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! 31 March 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_fapl_multi_s(prp_id, relax, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - LOGICAL, INTENT(IN) :: relax - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: flag - -! INTEGER, EXTERNAL :: h5pset_fapl_multi_sc -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_multi_sc(prp_id,flag) - USE H5GLOBAL - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_MULTI_SC'::h5pset_fapl_multi_sc - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, INTENT(IN) :: flag - END FUNCTION h5pset_fapl_multi_sc - END INTERFACE - flag = 0 - IF (relax) flag = 1 - hdferr = h5pset_fapl_multi_sc(prp_id, flag) - - END SUBROUTINE h5pset_fapl_multi_s -!****s* H5P/h5pget_fapl_multi_f -! NAME -! h5pget_fapl_multi_f -! -! PURPOSE -! Sets up use of the multi-file driver. -! -! INPUTS -! -! prp_id - file creation property list identifier -! OUTPUTS -! -! mem_map - mapping array -! memb_fapl - property list for each memory usage type -! memb_name - names of member file -! relax - flag -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! OPTIONAL PARAMETERS -! maxlen_out - maximum length for memb_name array element -! -! AUTHOR -! Elena Pourmal -! 24 March 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pget_fapl_multi_f(prp_id, memb_map, memb_fapl, memb_name, memb_addr, relax, hdferr, maxlen_out) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map - INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl - CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name - REAL, DIMENSION(*), INTENT(OUT) :: memb_addr - INTEGER, OPTIONAL, INTENT(OUT) :: maxlen_out - LOGICAL, INTENT(OUT) :: relax - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER, DIMENSION(1:H5FD_MEM_NTYPES_F) :: lenm - INTEGER :: maxlen - INTEGER :: c_maxlen_out - INTEGER :: flag - INTEGER :: i -! - INTERFACE - INTEGER FUNCTION h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, & - maxlen, memb_addr, flag, c_maxlen_out) - USE H5GLOBAL - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_MULTI_C'::h5pget_fapl_multi_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: memb_name - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, DIMENSION(*), INTENT(OUT) :: memb_map - INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: memb_fapl - CHARACTER(LEN=*), DIMENSION(*), INTENT(OUT) :: memb_name - REAL, DIMENSION(*), INTENT(OUT) :: memb_addr - INTEGER, DIMENSION(*) :: lenm - INTEGER :: maxlen - INTEGER :: c_maxlen_out - INTEGER, INTENT(OUT) :: flag - END FUNCTION h5pget_fapl_multi_c - END INTERFACE - - maxlen = LEN(memb_name(1)) - DO i=1, H5FD_MEM_NTYPES_F - lenm(i) = LEN_TRIM(memb_name(i)) - ENDDO - hdferr = h5pget_fapl_multi_c(prp_id, memb_map, memb_fapl, memb_name, lenm, maxlen, memb_addr, flag, c_maxlen_out) - - relax = .TRUE. - IF(flag .EQ. 0) relax = .FALSE. - IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out - END SUBROUTINE h5pget_fapl_multi_f -!****s* H5P/h5pset_szip_f -! NAME -! h5pset_szip_f -! -! PURPOSE -! Sets up use of szip compression -! -! INPUTS -! -! prp_id - dataset creation property list identifier -! options_mask - A bit-mask conveying the desired SZIP options. -! Current valid values in Fortran are: -! H5_SZIP_EC_OM_F -! H5_SZIP_NN_OM_F -! pixels_per_block - szip parameters -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! April 10 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pset_szip_f(prp_id, options_mask, pixels_per_block, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property - ! list identifier - INTEGER, INTENT(IN) :: options_mask ! A bit-mask conveying the desired - ! SZIP options - ! Current valid values in Fortran are: - ! H5_SZIP_EC_OM_F - ! H5_SZIP_NN_OM_F - INTEGER, INTENT(IN) :: pixels_per_block ! The number of pixels or data elements - ! in each data block - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pset_szip_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_szip_c(prp_id, options_mask, pixels_per_block) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SZIP_C'::h5pset_szip_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, INTENT(IN) :: options_mask - INTEGER, INTENT(IN) :: pixels_per_block - END FUNCTION h5pset_szip_c - END INTERFACE - hdferr = h5pset_szip_c(prp_id, options_mask, pixels_per_block) - - END SUBROUTINE h5pset_szip_f - -!****s* H5P/h5pall_filters_avail_f -! NAME -! h5pall_filters_avail_f -! -! PURPOSE -! Checks if all filters set in the dataset creation -! property list are available -! -! INPUTS -! -! prp_id - data creation property list identifier -! OUTPUTS -! -! flag - .TRUE. if all filters are available -! .FALSE. otherwise -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! April 10 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pall_filters_avail_f(prp_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property - ! list identifier - LOGICAL, INTENT(OUT) :: flag ! .TRUE. if all filters are available - ! .FALSE. otherwise - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: status - -! INTEGER, EXTERNAL :: h5pall_filters_avail_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pall_filters_avail_c(prp_id, status) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PALL_FILTERS_AVAIL_C'::h5pall_filters_avail_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id ! File creation property list identifier - INTEGER, INTENT(OUT) :: status - END FUNCTION h5pall_filters_avail_c - END INTERFACE - flag = .TRUE. - hdferr = h5pall_filters_avail_c(prp_id, status) - IF (status .EQ. 0 ) flag = .FALSE. - - END SUBROUTINE h5pall_filters_avail_f - -!****s* H5P/h5pget_filter_by_id_f -! NAME -! h5pget_filter_by_id_f -! -! PURPOSE -! Returns information about a filter in a pipeline -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! OUTPUTS -! -! filter_id - filter identifier -! flags - bit vector specifying certain general -! properties of the filter -! cd_nelmts - number of elements in cd_values -! cd_values - auxiliary data for the filter -! namelen - number of characters in the name buffer -! name - buffer to retrieve filter name -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! April 10 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pget_filter_by_id_f(prp_id, filter_id, flags, cd_nelmts, cd_values, namelen, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: filter_id ! Filter identifier - INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts ! Number of elements in cd_values. - INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values ! Auxiliary data for the filter. - INTEGER, INTENT(OUT) :: flags ! Bit vector specifying certain general - ! properties of the filter. - INTEGER(SIZE_T), INTENT(IN) :: namelen ! Anticipated number of characters in name. - CHARACTER(LEN=*), INTENT(OUT) :: name ! Name of the filter - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - -! INTEGER, EXTERNAL :: h5pget_filter_by_id_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & - cd_values, namelen, name) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILTER_BY_ID_C'::h5pget_filter_by_id_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter_id - INTEGER, DIMENSION(*), INTENT(OUT) :: cd_values - INTEGER, INTENT(OUT) :: flags - INTEGER(SIZE_T), INTENT(INOUT) :: cd_nelmts - INTEGER(SIZE_T), INTENT(IN) :: namelen - CHARACTER(LEN=*), INTENT(OUT) :: name - END FUNCTION h5pget_filter_by_id_c - END INTERFACE - - hdferr = h5pget_filter_by_id_c(prp_id, filter_id, flags, cd_nelmts, & - cd_values, namelen, name) - END SUBROUTINE h5pget_filter_by_id_f - -!****s* H5P/h5pmodify_filter_f -! NAME -! h5pmodify_filter_f -! -! PURPOSE -! Adds a filter to the filter pipeline. -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! filter - filter to be modified -! flags - bit vector specifying certain general -! properties of the filter -! cd_nelmts - number of elements in cd_values -! cd_values - auxiliary data for the filter -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! April 10 2003 -! -! Fortran90 Interface: - SUBROUTINE h5pmodify_filter_f(prp_id, filter, flags, cd_nelmts, cd_values, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER, INTENT(IN) :: filter ! Filter to be modified - INTEGER, INTENT(IN) :: flags ! Bit vector specifying certain general - ! properties of the filter - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts ! Number of elements in cd_values - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values ! Auxiliary data for the filter - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5pmodify_filter_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PMODIFY_FILTER_C'::h5pmodify_filter_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(IN) :: flags - INTEGER(SIZE_T), INTENT(IN) :: cd_nelmts - INTEGER, DIMENSION(*), INTENT(IN) :: cd_values - END FUNCTION h5pmodify_filter_c - END INTERFACE - - hdferr = h5pmodify_filter_c(prp_id, filter, flags, cd_nelmts, cd_values ) - END SUBROUTINE h5pmodify_filter_f - -!****s* H5P/h5premove_filter_f -! NAME -! h5premove_filter_f -! -! PURPOSE -! Delete one or more filters from the filter pipeline. -! -! INPUTS -! -! prp_id - data creation or transfer property list -! identifier -! filter - filter to be removed -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Quincey Koziol -! January 27 2004 -! -! Fortran90 Interface: - SUBROUTINE h5premove_filter_f(prp_id, filter, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Dataset creation property list - ! identifier - INTEGER, INTENT(IN) :: filter ! Filter to be removed - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! INTEGER, EXTERNAL :: h5premove_filter_c -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5premove_filter_c(prp_id, filter) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREMOVE_FILTER_C'::h5premove_filter_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER, INTENT(IN) :: filter - END FUNCTION h5premove_filter_c - END INTERFACE - - hdferr = h5premove_filter_c(prp_id, filter) - END SUBROUTINE h5premove_filter_f - -!****s* H5P/H5Pget_attr_phase_change_f -! NAME -! H5Pget_attr_phase_change_f -! -! PURPOSE -! Retrieves attribute storage phase change thresholds -! -! INPUTS -! -! ocpl_id - Object (dataset or group) creation property list identifier -! OUTPUTS -! -! max_compact - Maximum number of attributes to be stored in compact storage -! (Default: 8) -! min_dense - Minimum number of attributes to be stored in dense storage -! (Default: 6) -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier - INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage - ! (Default: 8) - INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage - ! (Default: 6) - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ATTR_PHASE_CHANGE_C'::h5pget_attr_phase_change_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocpl_id - INTEGER, INTENT(OUT) :: max_compact - INTEGER, INTENT(OUT) :: min_dense - - END FUNCTION h5pget_attr_phase_change_c - END INTERFACE - - hdferr = h5pget_attr_phase_change_c(ocpl_id, max_compact, min_dense) - END SUBROUTINE h5pget_attr_phase_change_f - -!****s* H5P/H5Pset_attr_creation_order_f -! NAME -! H5Pset_attr_creation_order_f -! -! PURPOSE -! Sets tracking and indexing of attribute creation order -! -! INPUTS -! -! ocpl_id - Object creation property list identifier -! crt_order_flags - Flags specifying whether to track and index attribute creation order -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_attr_creation_order_f(ocpl_id, crt_order_flags , hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier - INTEGER, INTENT(IN) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ATTR_CREATION_ORDER_C'::h5pset_attr_creation_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocpl_id - INTEGER, INTENT(IN) :: crt_order_flags - - END FUNCTION H5Pset_attr_creation_order_c - END INTERFACE - - hdferr = H5Pset_attr_creation_order_c(ocpl_id, crt_order_flags) - END SUBROUTINE h5pset_attr_creation_order_f - -!****s* H5P/H5Pset_shared_mesg_nindexes_f -! NAME -! H5Pset_shared_mesg_nindexes_f -! -! PURPOSE -! Sets number of shared object header message indexes -! -! INPUTS -! -! plist_id - file creation property list -! nindexes - Number of shared object header message indexes to be available in files created with this property list -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_shared_mesg_nindexes_f( plist_id, nindexes, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list - INTEGER, INTENT(IN) :: nindexes ! Number of shared object header message indexes - ! available in files created WITH this property list - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_shared_mesg_nindexes_c(plist_id, nindexes) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHARED_MESG_NINDEXES_C'::h5pset_shared_mesg_nindexes_c - !DEC$ENDIF - - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(IN) :: nindexes - - END FUNCTION H5pset_shared_mesg_nindexes_c - END INTERFACE - - hdferr = h5pset_shared_mesg_nindexes_c(plist_id, nindexes) - - END SUBROUTINE h5pset_shared_mesg_nindexes_f - -!****s* H5P/H5Pset_shared_mesg_index_f -! NAME -! H5Pset_shared_mesg_index_f -! -! PURPOSE -! Configures the specified shared object header message index -! -! INPUTS -! -! fcpl_id - File creation property list identifier. -! index_num - Index being configured. -! mesg_type_flags - Types of messages that should be stored in this index. -! min_mesg_size - Minimum message size. -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_shared_mesg_index_f(fcpl_id, index_num, mesg_type_flags, min_mesg_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fcpl_id ! file creation property list - INTEGER, INTENT(IN) :: index_num ! Index being configured. - INTEGER, INTENT(IN) :: mesg_type_flags ! Types of messages that should be stored in this index. - INTEGER, INTENT(IN) :: min_mesg_size ! Minimum message size. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SHARED_MESG_INDEX_C'::h5pset_shared_mesg_index_c - !DEC$ENDIF - - INTEGER(HID_T), INTENT(IN) :: fcpl_id - INTEGER, INTENT(IN) :: index_num - INTEGER, INTENT(IN) :: mesg_type_flags - INTEGER, INTENT(IN) :: min_mesg_size - - END FUNCTION H5pset_shared_mesg_index_c - END INTERFACE - - hdferr = h5pset_shared_mesg_index_c(fcpl_id, index_num, mesg_type_flags, min_mesg_size) - - END SUBROUTINE h5pset_shared_mesg_index_f - -!****s* H5P/H5Pget_attr_creation_order_f -! NAME -! H5Pget_attr_creation_order_f -! -! PURPOSE -! Retrieves tracking and indexing settings for attribute creation order -! -! INPUTS -! -! ocpl_id - Object (group or dataset) creation property list identifier -! -! OUTPUTS -! -! crt_order_flags - Flags specifying whether to track and index attribute creation order -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_attr_creation_order_f(ocpl_id, crt_order_flags, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (group or dataset) creation property list identifier - INTEGER, INTENT(OUT) :: crt_order_flags ! Flags specifying whether to track and index attribute creation order - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_ATTR_CREATION_ORDER_C'::h5pget_attr_creation_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocpl_id - INTEGER, INTENT(OUT) :: crt_order_flags - - END FUNCTION H5pget_attr_creation_order_c - END INTERFACE - - hdferr = h5pget_attr_creation_order_c(ocpl_id, crt_order_flags) - - END SUBROUTINE h5pget_attr_creation_order_f - -!****s* H5P/H5Pset_libver_bounds_f -! NAME -! H5Pset_libver_bounds_f -! -! PURPOSE -! Sets bounds on library versions, and indirectly format versions, to be used when creating objects. -! -! INPUTS -! -! fapl_id - File access property list identifier -! low - The earliest version of the library that will be used for writing objects. -! high - The latest version of the library that will be used for writing objects. -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 18, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_libver_bounds_f(fapl_id, low, high, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier - INTEGER, INTENT(IN) :: low ! The earliest version of the library that will be used for writing objects. - ! Currently, low must be one of two pre-defined values: - ! HDF_LIBVER_EARLIEST_F - ! HDF_LIBVER_LATEST_F - INTEGER, INTENT(IN) :: high ! The latest version of the library that will be used for writing objects. - ! Currently, low must set to the pre-defined value: - ! HDF_LIBVER_LATEST_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_libver_bounds_c(fapl_id, low, high) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LIBVER_BOUNDS_C'::h5pset_libver_bounds_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: fapl_id - INTEGER, INTENT(IN) :: low - INTEGER, INTENT(IN) :: high - - END FUNCTION H5pset_libver_bounds_c - END INTERFACE - - hdferr = h5pset_libver_bounds_c(fapl_id, low, high) - - END SUBROUTINE h5pset_libver_bounds_f - -!****s* H5P/H5Pset_link_creation_order_f -! NAME -! H5Pset_link_creation_order_f -! -! PURPOSE -! Sets creation order tracking and indexing for links in a group. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! crt_order_flags - Creation order flag(s) -! -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 18, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! File access property list identifier - INTEGER, INTENT(IN) :: crt_order_flags ! Creation order flag(s) - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_link_creation_order_c(gcpl_id, crt_order_flags) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LINK_CREATION_ORDER_C'::h5pset_link_creation_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(IN) :: crt_order_flags - - END FUNCTION H5pset_link_creation_order_c - END INTERFACE - - hdferr = h5pset_link_creation_order_c(gcpl_id, crt_order_flags) - - END SUBROUTINE h5pset_link_creation_order_f - -!****s* H5P/H5Pget_link_phase_change_f -! NAME -! H5Pget_link_phase_change_f -! -! PURPOSE -! Queries the settings for conversion between compact and dense groups. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! OUTPUTS -! -! max_compact - Maximum number of attributes to be stored in compact storage -! min_dense - Minimum number of attributes to be stored in dense storage -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 20, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER, INTENT(OUT) :: max_compact ! Maximum number of attributes to be stored in compact storage - INTEGER, INTENT(OUT) :: min_dense ! Minimum number of attributes to be stored in dense storage - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LINK_PHASE_CHANGE_C'::h5pget_link_phase_change_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(OUT) :: max_compact - INTEGER, INTENT(OUT) :: min_dense - - END FUNCTION h5pget_link_phase_change_c - END INTERFACE - - hdferr = h5pget_link_phase_change_c(gcpl_id, max_compact, min_dense) - END SUBROUTINE h5pget_link_phase_change_f - -!****s* H5P/H5Pget_obj_track_times_f -! NAME -! H5Pget_obj_track_times_f -! -! PURPOSE -! Returns whether times are tracked for an object. -! -! INPUTS -! -! plist_id - property list id -! flag - object timestamp setting -! .TRUE.,.FALSE. -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 22, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_obj_track_times_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property - ! list identifier - LOGICAL, INTENT(OUT) :: flag ! Object timestamp setting - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: status -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_obj_track_times_c(plist_id, status) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_OBJ_TRACK_TIMES_C'::h5pget_obj_track_times_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier - INTEGER, INTENT(OUT) :: status - END FUNCTION h5pget_obj_track_times_c - END INTERFACE - flag = .TRUE. - hdferr = h5pget_obj_track_times_c(plist_id, status) - IF(status.EQ.0) flag = .FALSE. - - END SUBROUTINE h5pget_obj_track_times_f - -!****s* H5P/H5Pset_obj_track_times_f -! NAME -! H5Pset_obj_track_times_f -! -! PURPOSE -! Set whether the birth, access, modification & change times for -! an object are stored. -! -! Birth time is the time the object was created. Access time is -! the last time that metadata or raw data was read from this -! object. Modification time is the last time the data for -! this object was changed (either writing raw data to a dataset -! or inserting/modifying/deleting a link in a group). Change -! time is the last time the metadata for this object was written -! (adding/modifying/deleting an attribute on an object, extending -! the size of a dataset, etc). -! -! If these times are not tracked, they will be reported as -! 12:00 AM UDT, Jan. 1, 1970 (i.e. 0 seconds past the UNIX -! epoch) when queried. -! -! INPUTS -! -! plist_id - property list id -! flag - object timestamp setting -! .TRUE.,.FALSE. -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 22, 2008 -! -! -! Fortran90 Interface: - SUBROUTINE h5pset_obj_track_times_f(plist_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Dataset creation property - ! list identifier - LOGICAL, INTENT(IN) :: flag ! Object timestamp setting - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: status -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_obj_track_times_c(plist_id, status) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_OBJ_TRACK_TIMES_C'::h5pset_obj_track_times_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id ! File creation property list identifier - INTEGER, INTENT(IN) :: status - END FUNCTION h5pset_obj_track_times_c - END INTERFACE - - status = 0 - IF(flag) status = 1 - - hdferr = h5pset_obj_track_times_c(plist_id, status) - - END SUBROUTINE h5pset_obj_track_times_f - -!****s* H5P/H5Pset_create_inter_group_f -! NAME -! H5Pset_create_inter_group_f -! -! PURPOSE -! Specifies in property list whether to create missing intermediate groups. -! -! INPUTS -! -! lcpl_id - Link creation property list identifier -! crt_intermed_group - crt_intermed_group specifying whether -! to create intermediate groups upon the creation -! of an object -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! February 22, 2008 -! -! HISTORY -! The long subroutine name (>31) on older f90 compilers causes problems -! so had to shorten the name -! Fortran90 Interface: - SUBROUTINE h5pset_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier - INTEGER, INTENT(IN) :: crt_intermed_group ! specifying whether to create intermediate groups - ! upon the creation of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CREATE_INTER_GROUP_C'::h5pset_create_inter_group_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: lcpl_id - INTEGER, INTENT(IN) :: crt_intermed_group - END FUNCTION h5pset_create_inter_group_c - END INTERFACE - - hdferr = h5pset_create_inter_group_c(lcpl_id, crt_intermed_group) - - END SUBROUTINE h5pset_create_inter_group_f - -!****s* H5P/H5Pget_link_creation_order_f -! NAME -! H5Pget_link_creation_order_f -! -! PURPOSE -! Queries whether link creation order is tracked and/or indexed in a group. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! -! OUTPUTS -! -! crt_order_flags - Creation order flag(s) -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_link_creation_order_f(gcpl_id, crt_order_flags, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER, INTENT(OUT) :: crt_order_flags ! Creation order flag(s) - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_link_creation_order_c(gcpl_id, crt_order_flags) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LINK_CREATION_ORDER_C'::h5pget_link_creation_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(OUT) :: crt_order_flags - - END FUNCTION H5pget_link_creation_order_c - END INTERFACE - - hdferr = h5pget_link_creation_order_c(gcpl_id, crt_order_flags) - - END SUBROUTINE h5pget_link_creation_order_f - -!****s* H5P/H5Pset_char_encoding_f -! NAME -! H5Pset_char_encoding_f -! -! PURPOSE -! Sets the character encoding used to encode a string. -! -! INPUTS -! -! plist_id - Property list identifier -! encoding - Valid values for encoding are: -! H5T_CSET_ASCII_F -> US ASCII -! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding -! -! OUTPUTS -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_char_encoding_f(plist_id, encoding, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier - INTEGER, INTENT(IN) :: encoding ! String encoding character set: - ! H5T_CSET_ASCII_F -> US ASCII - ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_char_encoding_c(plist_id, encoding) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHAR_ENCODING_C'::h5pset_char_encoding_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(IN) :: encoding - - END FUNCTION H5pset_char_encoding_c - END INTERFACE - - hdferr = h5pset_char_encoding_c(plist_id, encoding) - - END SUBROUTINE h5pset_char_encoding_f - -!****s* H5P/H5Pget_char_encoding_f -! NAME -! H5Pget_char_encoding_f -! -! PURPOSE -! Retrieves the character encoding used to create a string -! -! INPUTS -! -! plist_id - Property list identifier -! -! OUTPUTS -! -! encoding - Valid values for encoding are: -! H5T_CSET_ASCII_F -> US ASCII -! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_char_encoding_f(plist_id, encoding, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Property list identifier - - INTEGER, INTENT(OUT) :: encoding ! Valid values for encoding are: - ! H5T_CSET_ASCII_F -> US ASCII - ! H5T_CSET_UTF8_F -> UTF-8 Unicode encoding - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_char_encoding_c(plist_id, encoding) - - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHAR_ENCODING_C'::h5pget_char_encoding_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(OUT) :: encoding - - END FUNCTION H5pget_char_encoding_c - END INTERFACE - - hdferr = h5pget_char_encoding_c(plist_id, encoding) - - END SUBROUTINE h5pget_char_encoding_f - -!****s* H5P/h5pset_copy_object_f -! NAME -! h5pset_copy_object_f -! -! PURPOSE -! Sets properties to be used when an object is copied. -! -! INPUTS -! -! ocp_plist_id - Object copy property list identifier -! copy_options - Copy option(s) to be set -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pset_copy_object_f(ocp_plist_id, copy_options, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier - INTEGER, INTENT(IN) :: copy_options ! Copy option(s) to be set, valid options are: - ! H5O_COPY_SHALLOW_HIERARCHY_F - ! H5O_COPY_EXPAND_SOFT_LINK_F - ! H5O_COPY_EXPAND_EXT_LINK_F - ! H5O_COPY_EXPAND_REFERENCE_F - ! H5O_COPY_WITHOUT_ATTR_FLAG_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_copy_object_c(ocp_plist_id, copy_options) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_COPY_OBJECT_C'::h5pset_copy_object_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocp_plist_id - INTEGER, INTENT(IN) :: copy_options - END FUNCTION h5pset_copy_object_c - END INTERFACE - hdferr = h5pset_copy_object_c(ocp_plist_id, copy_options) - END SUBROUTINE h5pset_copy_object_f - -!****s* H5P/h5pget_copy_object_f -! NAME -! h5pget_copy_object_f -! -! PURPOSE -! Retrieves the properties to be used when an object is copied. -! -! INPUTS -! -! ocp_plist_id - Object copy property list identifier -! OUTPUTS -! -! copy_options - Copy option(s) to be get -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 3, 2008 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pget_copy_object_f(ocp_plist_id, copy_options, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocp_plist_id ! Object copy property list identifier - INTEGER, INTENT(OUT) :: copy_options ! Valid copy options returned are: - ! H5O_COPY_SHALLOW_HIERARCHY_F - ! H5O_COPY_EXPAND_SOFT_LINK_F - ! H5O_COPY_EXPAND_EXT_LINK_F - ! H5O_COPY_EXPAND_REFERENCE_F - ! H5O_COPY_WITHOUT_ATTR_FLAG_F - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_copy_object_c(ocp_plist_id, copy_options) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_COPY_OBJECT_C'::h5pget_copy_object_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocp_plist_id - INTEGER, INTENT(OUT) :: copy_options - END FUNCTION h5pget_copy_object_c - END INTERFACE - hdferr = h5pget_copy_object_c(ocp_plist_id, copy_options) - END SUBROUTINE h5pget_copy_object_f - -!****s* H5P/h5pget_data_transform_f -! NAME -! h5pget_data_transform_f -! -! PURPOSE -! Retrieves a data transform expression. -! -! INPUTS -! -! plist_id - Identifier of the property list or class -! OUTPUTS -! -! expression - buffer to hold transform expression -! hdferr - Error code -! Success: Actual lenght of the expression -! If provided buffer "expression" is -! smaller, than expression will be -! truncated to fit into -! provided user buffer -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 19, 2008 -! -! HISTORY -! -! Should hdferr return just 0 or 1 and add another arguement for the size? -! Fortran90 Interface: -SUBROUTINE h5pget_data_transform_f(plist_id, expression, hdferr, size) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class - CHARACTER(LEN=*), INTENT(OUT) :: expression ! Buffer to hold transform expression - INTEGER(SIZE_T), INTENT(OUT), OPTIONAL :: size ! Registered size of the transform expression - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: expression_len - INTEGER(SIZE_T) :: size_default - - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_data_transform_c(plist_id, expression, expression_len, size_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_DATA_TRANSFORM_C'::h5pget_data_transform_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: expression - INTEGER(HID_T), INTENT(IN) :: plist_id - CHARACTER(LEN=*), INTENT(OUT) :: expression - INTEGER(SIZE_T) :: size_default - INTEGER :: expression_len - END FUNCTION h5pget_data_transform_c - END INTERFACE - - size_default = 0 - expression_len = LEN(expression) - - hdferr = h5pget_data_transform_c(plist_id, expression, expression_len, size_default) - - IF(present(size)) size = size_default - - END SUBROUTINE h5pget_data_transform_f - -!****s* H5P/h5pset_data_transform_f -! NAME -! h5pset_data_transform_f -! -! PURPOSE -! Sets a data transform expression. -! -! INPUTS -! -! plist_id - Identifier of the property list or class -! expression - Buffer to hold transform expression -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 19, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_data_transform_f(plist_id, expression, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id ! Identifier of the property list or class - CHARACTER(LEN=*), INTENT(IN) :: expression ! Buffer to hold transform expression - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTEGER :: expression_len - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_data_transform_c(plist_id, expression, expression_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_DATA_TRANSFORM_C'::h5pset_data_transform_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: expression - INTEGER(HID_T), INTENT(IN) :: plist_id - CHARACTER(LEN=*), INTENT(IN) :: expression - INTEGER :: expression_len - END FUNCTION h5pset_data_transform_c - END INTERFACE - - expression_len = LEN(expression) - hdferr = h5pset_data_transform_c(plist_id, expression, expression_len) - - END SUBROUTINE h5pset_data_transform_f - -!****s* H5P/H5Pget_local_heap_size_hint_f -! NAME -! H5Pget_local_heap_size_hint_f -! -! PURPOSE -! Queries the local heap size hint for original-style groups. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! OUTPUTS -! -! size_hint - Hint for size of local heap -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: size_hint ! Hint for size of local heap - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_local_heap_size_hint_c(gcpl_id, size_hint) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_LOCAL_HEAP_SIZE_HINT_C'::h5pget_local_heap_size_hint_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER(SIZE_T), INTENT(OUT) :: size_hint - END FUNCTION H5Pget_local_heap_size_hint_c - END INTERFACE - - hdferr = H5Pget_local_heap_size_hint_c(gcpl_id, size_hint) - - END SUBROUTINE h5pget_local_heap_size_hint_f - -!****s* H5P/H5Pget_est_link_info_f -! NAME -! H5Pget_est_link_info_f -! -! PURPOSE -! Queries data required to estimate required local heap or object header size. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! OUTPUTS -! -! est_num_entries - Estimated number of links to be inserted into group -! est_name_len - Estimated average length of link names -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pget_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER, INTENT(OUT) :: est_num_entries ! Estimated number of links to be inserted into group - INTEGER, INTENT(OUT) :: est_name_len ! Estimated average length of link names - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_EST_LINK_INFO_C'::h5pget_est_link_info_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(OUT) :: est_num_entries - INTEGER, INTENT(OUT) :: est_name_len - END FUNCTION h5pget_est_link_info_c - END INTERFACE - - hdferr = h5pget_est_link_info_c(gcpl_id, est_num_entries, est_name_len) - - END SUBROUTINE h5pget_est_link_info_f - -!****s* H5P/H5Pset_local_heap_size_hint_f -! NAME -! H5Pset_local_heap_size_hint_f -! -! PURPOSE -! Sets the local heap size hint for original-style groups. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! size_hint - Hint for size of local heap -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_local_heap_size_hint_f(gcpl_id, size_hint, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER(SIZE_T), INTENT(IN) :: size_hint ! Hint for size of local heap - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_local_heap_size_hint_c(gcpl_id, size_hint) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LOCAL_HEAP_SIZE_HINT_C'::h5pset_local_heap_size_hint_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER(SIZE_T), INTENT(IN) :: size_hint - END FUNCTION h5pset_local_heap_size_hint_c - END INTERFACE - - hdferr = H5Pset_local_heap_size_hint_c(gcpl_id, size_hint) - - END SUBROUTINE h5pset_local_heap_size_hint_f - -!****s* H5P/h5pset_est_link_info_f -! NAME -! h5pset_est_link_info_f -! -! PURPOSE -! Sets estimated number of links and length of link names in a group. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! est_num_entries - Estimated number of links to be inserted into group -! est_name_len - Estimated average length of link names -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_est_link_info_f(gcpl_id, est_num_entries, est_name_len, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER, INTENT(IN) :: est_num_entries ! Estimated number of links to be inserted into group - INTEGER, INTENT(IN) :: est_name_len ! Estimated average length of link names - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_EST_LINK_INFO_C'::h5pset_est_link_info_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(IN) :: est_num_entries - INTEGER, INTENT(IN) :: est_name_len - END FUNCTION h5pset_est_link_info_c - END INTERFACE - - hdferr = H5Pset_est_link_info_c(gcpl_id, est_num_entries, est_name_len) - - END SUBROUTINE h5pset_est_link_info_f - -!****s* H5P/h5pset_link_phase_change_f -! NAME -! h5pset_link_phase_change_f -! -! PURPOSE -! Sets the parameters for conversion between compact and dense groups. -! -! INPUTS -! -! gcpl_id - Group creation property list identifier -! max_compact - Maximum number of attributes to be stored in compact storage -! min_dense - Minimum number of attributes to be stored in dense storage -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: -SUBROUTINE h5pset_link_phase_change_f(gcpl_id, max_compact, min_dense, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: gcpl_id ! Group creation property list identifier - INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage - INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_LINK_PHASE_CHANGE_C'::h5pset_link_phase_change_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: gcpl_id - INTEGER, INTENT(IN) :: max_compact - INTEGER, INTENT(IN) :: min_dense - - END FUNCTION h5pset_link_phase_change_c - END INTERFACE - - hdferr = h5pset_link_phase_change_c(gcpl_id, max_compact, min_dense) - END SUBROUTINE h5pset_link_phase_change_f - -!****s* H5P/h5pset_fapl_direct_f -! NAME -! h5pset_fapl_direct_f -! -! PURPOSE -! Sets up use of the direct I/O driver. -! -! INPUTS -! -! fapl_id - File access property list identifier -! alignment - Required memory alignment boundary -! block_size - File system block size -! cbuf_size - Copy buffer size -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: -SUBROUTINE h5pset_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(IN) :: alignment ! Required memory alignment boundary! - INTEGER(SIZE_T), INTENT(IN) :: block_size ! File system block size - INTEGER(SIZE_T), INTENT(IN) :: cbuf_size ! Copy buffer size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FAPL_DIRECT_C'::h5pset_fapl_direct_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: fapl_id - INTEGER(SIZE_T), INTENT(IN) :: alignment - INTEGER(SIZE_T), INTENT(IN) :: block_size - INTEGER(SIZE_T), INTENT(IN) :: cbuf_size - END FUNCTION h5pset_fapl_direct_c - END INTERFACE - - hdferr = H5Pset_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) - END SUBROUTINE h5pset_fapl_direct_f - -!****s* H5P/h5pget_fapl_direct_f -! NAME -! h5pget_fapl_direct_f -! -! PURPOSE -! Gets up use of the direct I/O driver. -! -! INPUTS -! -! fapl_id - File access property list identifier -! OUTPUTS -! -! alignment - Required memory alignment boundary -! block_size - File system block size -! cbuf_size - Copy buffer size -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_fapl_direct_f(fapl_id, alignment, block_size, cbuf_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: fapl_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: alignment ! Required memory alignment boundary! - INTEGER(SIZE_T), INTENT(OUT) :: block_size ! File system block size - INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size ! Copy buffer size - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FAPL_DIRECT_C'::h5pget_fapl_direct_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: fapl_id - INTEGER(SIZE_T), INTENT(OUT) :: alignment - INTEGER(SIZE_T), INTENT(OUT) :: block_size - INTEGER(SIZE_T), INTENT(OUT) :: cbuf_size - END FUNCTION h5pget_fapl_direct_c - END INTERFACE - - hdferr = H5Pget_fapl_direct_c(fapl_id, alignment, block_size, cbuf_size) - END SUBROUTINE h5pget_fapl_direct_f - -!****s* H5P/H5Pset_attr_phase_change_f -! NAME -! H5Pset_attr_phase_change_f -! -! PURPOSE -! Sets attribute storage phase change thresholds. -! -! INPUTS -! -! ocpl_id - Object (dataset or group) creation property list identifier -! OUTPUTS -! -! max_compact - Maximum number of attributes to be stored in compact storage -! (Default: 8) -! min_dense - Minimum number of attributes to be stored in dense storage -! (Default: 6) -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! January, 2008 -! -! Fortran90 Interface: -SUBROUTINE h5pset_attr_phase_change_f(ocpl_id, max_compact, min_dense, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: ocpl_id ! Object (dataset or group) creation property list identifier - INTEGER, INTENT(IN) :: max_compact ! Maximum number of attributes to be stored in compact storage - !(Default: 8) - INTEGER, INTENT(IN) :: min_dense ! Minimum number of attributes to be stored in dense storage - ! (Default: 6) - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_ATTR_PHASE_CHANGE_C'::h5pset_attr_phase_change_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: ocpl_id - INTEGER, INTENT(IN) :: max_compact - INTEGER, INTENT(IN) :: min_dense - - END FUNCTION h5pset_attr_phase_change_c - END INTERFACE - - hdferr = h5pset_attr_phase_change_c(ocpl_id, max_compact, min_dense) - - - END SUBROUTINE h5pset_attr_phase_change_f - -!****s* H5P/H5Pset_nbit_f -! NAME -! H5Pset_nbit_f -! -! PURPOSE -! Sets up the use of the N-Bit filter. -! -! Inputs: -! plist_id - Dataset creation property list identifier. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_nbit_f(plist_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION H5Pset_nbit_c(plist_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_NBIT_C'::h5pset_nbit_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - END FUNCTION H5Pset_nbit_c - END INTERFACE - - hdferr = H5Pset_nbit_c(plist_id) - - END SUBROUTINE h5pset_nbit_f - -!****s* H5P/h5pset_scaleoffset_f -! NAME -! h5pset_scaleoffset_f -! -! PURPOSE -! Sets up the use of the scale-offset filter. -! -! Inputs: -! plist_id - Dataset creation property list identifier. -! scale_type - Flag indicating compression method. Valid values: -! H5Z_SO_FLOAT_DSCALE_F -! H5Z_SO_FLOAT_ESCALE_F -! H5Z_SO_INT_F -! -! scale_factor - Parameter related to scale. -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! March 21, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pset_scaleoffset_f(plist_id, scale_type, scale_factor, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER , INTENT(IN) :: scale_type - INTEGER , INTENT(IN) :: scale_factor - INTEGER , INTENT(OUT) :: hdferr -!***** - - INTERFACE - INTEGER FUNCTION h5pset_scaleoffset_c(plist_id, scale_type, scale_factor) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_SCALEOFFSET_C'::h5pset_scaleoffset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: plist_id - INTEGER, INTENT(IN) :: scale_type - INTEGER, INTENT(IN) :: scale_factor - END FUNCTION h5pset_scaleoffset_c - END INTERFACE - - hdferr = H5Pset_scaleoffset_c(plist_id, scale_type, scale_factor) - - END SUBROUTINE h5pset_scaleoffset_f - -!****s* H5P/h5pset_nlinks_f -! NAME -! h5pset_nlinks_f -! -! PURPOSE -! Sets maximum number of soft or user-defined link traversals. -! -! INPUTS -! -! lapl_id - File access property list identifier -! nlinks - Maximum number of links to traverse -! -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 24, 2008 -! -! HISTORY -! -! -! Fortran90 Interface: - SUBROUTINE h5pset_nlinks_f(lapl_id, nlinks, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(IN) :: nlinks ! Maximum number of links to traverse - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pset_nlinks_c(lapl_id, nlinks) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_NLINKS_C'::h5pset_nlinks_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: lapl_id - INTEGER(SIZE_T), INTENT(IN) :: nlinks - END FUNCTION h5pset_nlinks_c - END INTERFACE - - hdferr = h5pset_nlinks_c(lapl_id, nlinks) - - END SUBROUTINE h5pset_nlinks_f - -!****s* H5P/h5pget_nlinks_f -! NAME -! h5pget_nlinks_f -! -! PURPOSE -! Gets maximum number of soft or user-defined link traversals. -! -! INPUTS -! -! lapl_id - File access property list identifier -! nlinks - Maximum number of links to traverse -! -! OUTPUTS -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! March 24, 2008 -! -! Fortran90 Interface: - SUBROUTINE h5pget_nlinks_f(lapl_id, nlinks, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: lapl_id ! File access property list identifier - INTEGER(SIZE_T), INTENT(OUT) :: nlinks ! Maximum number of links to traverse - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** -! MS FORTRAN needs explicit interface for C functions called here. -! - INTERFACE - INTEGER FUNCTION h5pget_nlinks_c(lapl_id, nlinks) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_NLINKS_C'::h5pget_nlinks_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: lapl_id - INTEGER(SIZE_T), INTENT(OUT) :: nlinks - END FUNCTION h5pget_nlinks_c - END INTERFACE - - hdferr = h5pget_nlinks_c(lapl_id, nlinks) - - END SUBROUTINE h5pget_nlinks_f - -!****s* H5P/H5Pget_create_inter_group_f -! NAME -! H5Pget_create_inter_group_f -! -! PURPOSE -! Determines whether property is set to enable creating missing intermediate groups. -! -! INPUTS -! -! lcpl_id - Link creation property list identifier -! crt_intermed_group - Specifying whether to create intermediate groups upon -! the creation of an object -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! April 4, 2008 -! -! HISTORY -! -! The long subroutine name (>31) on older f90 compilers causes problems -! so the name was shortened -! Fortran90 Interface: - SUBROUTINE h5pget_create_inter_group_f(lcpl_id, crt_intermed_group, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: lcpl_id ! Link creation property list identifier - INTEGER, INTENT(IN) :: crt_intermed_group ! Flag specifying whether to create intermediate groups - ! upon creation of an object - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CREATE_INTER_GROUP_C'::h5pget_create_inter_group_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: lcpl_id - INTEGER, INTENT(IN) :: crt_intermed_group - END FUNCTION h5pget_create_inter_group_c - END INTERFACE - - hdferr = h5pget_create_inter_group_c(lcpl_id, crt_intermed_group) - - END SUBROUTINE h5pget_create_inter_group_f - -!****s* H5P/H5Pset_chunk_cache_f -! NAME -! H5Pset_chunk_cache_f -! -! PURPOSE -! Set the number of objects in the meta data cache and the -! maximum number of chunks and bytes in the raw data chunk cache. -! Once set, these values will override the values in the file access -! property list. Each of these values can be individually unset -! (or not set at all) by passing the macros: -! H5D_CHUNK_CACHE_NSLOTS_DFLT_F, -! H5D_CHUNK_CACHE_NBYTES_DFLT_F, and/or -! H5D_CHUNK_CACHE_W0_DFLT_F -! as appropriate. -! -! The RDCC_W0 value should be between 0 and 1 inclusive and -! indicates how much chunks that have been fully read or fully -! written are favored for preemption. A value of zero means -! fully read or written chunks are treated no differently than -! other chunks (the preemption is strictly LRU) while a value -! of one means fully read chunks are always preempted before -! other chunks. -! -! INPUTS -! -! dapl_id - Dataset access property list identifier. -! rdcc_nslots - The number of chunk slots in the raw data chunk cache for this dataset. -! rdcc_nbytes - The total size of the raw data chunk cache for this dataset. -! rdcc_w0 - The chunk preemption policy for this dataset. -! OUTPUTS -! -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! April 13, 2009 -! -! HISTORY -! -! Fortran90 Interface: - SUBROUTINE h5pset_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots ! The number of chunk slots in the raw data - ! chunk cache for this dataset. - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes ! The total size of the raw data chunk cache - ! for this dataset. - REAL, INTENT(IN) :: rdcc_w0 ! The chunk preemption policy for this dataset. - INTEGER, INTENT(OUT) :: hdferr ! Error code - ! 0 on success and -1 on failure -!***** - - INTERFACE - INTEGER FUNCTION h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_CHUNK_CACHE_C'::h5pset_chunk_cache_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dapl_id - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nslots - INTEGER(SIZE_T), INTENT(IN) :: rdcc_nbytes - REAL, INTENT(IN) :: rdcc_w0 - END FUNCTION h5pset_chunk_cache_c - END INTERFACE - - hdferr = h5pset_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) - - END SUBROUTINE h5pset_chunk_cache_f - -!****s* H5P/H5Pget_chunk_cache_f -! NAME -! H5Pget_chunk_cache_f -! -! PURPOSE -! Retrieves the maximum possible number of elements in the meta -! data cache and the maximum possible number of elements and -! bytes and the RDCC_W0 value in the raw data chunk cache. Any -! (or all) arguments may be null pointers in which case the -! corresponding datum is not returned. If these properties have -! not been set on this property list, the default values for a -! file access property list are returned. -! -! INPUTS -! -! dapl_id - Dataset access property list identifier. -! OUTPUTS -! -! rdcc_nslots - Number of chunk slots in the raw data chunk cache hash table. -! rdcc_nbytes - Total size of the raw data chunk cache, in bytes. -! rdcc_w0 - Preemption policy. -! hdferr - Error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! M. Scot Breitenfeld -! April 13, 2009 -! -! HISTORY -! -! Fortran90 Interface: - SUBROUTINE h5pget_chunk_cache_f(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dapl_id ! Dataset access property list identifier. - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots ! Number of chunk slots in the raw data chunk cache hash table. - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes ! Total size of the raw data chunk cache, in bytes. - REAL, INTENT(OUT) :: rdcc_w0 ! Preemption policy. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_CHUNK_CACHE_C'::h5pget_chunk_cache_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dapl_id - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nslots - INTEGER(SIZE_T), INTENT(OUT) :: rdcc_nbytes - REAL, INTENT(OUT) :: rdcc_w0 - END FUNCTION h5pget_chunk_cache_c - END INTERFACE - - hdferr = h5pget_chunk_cache_c(dapl_id, rdcc_nslots, rdcc_nbytes, rdcc_w0) - - END SUBROUTINE h5pget_chunk_cache_f - -END MODULE H5P - - - diff --git a/fortran/src/H5Pff_F03.f90 b/fortran/src/H5Pff_F03.f90 deleted file mode 100644 index 01d1d98..0000000 --- a/fortran/src/H5Pff_F03.f90 +++ /dev/null @@ -1,1267 +0,0 @@ -!****h* ROBODoc/H5P (F03) -! -! NAME -! H5P_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5P functions. -! It contains the same functions as H5Pff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Pff_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5P function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5P_PROVISIONAL - - USE H5GLOBAL - - INTERFACE h5pset_fill_value_f - MODULE PROCEDURE h5pset_fill_value_integer - MODULE PROCEDURE h5pset_fill_value_real - MODULE PROCEDURE h5pset_fill_value_char - ! Recommended procedure: - MODULE PROCEDURE h5pset_fill_value_ptr - - END INTERFACE - - INTERFACE h5pget_fill_value_f - MODULE PROCEDURE h5pget_fill_value_integer - MODULE PROCEDURE h5pget_fill_value_real - MODULE PROCEDURE h5pget_fill_value_char - ! Recommended procedure: - MODULE PROCEDURE h5pget_fill_value_ptr - - END INTERFACE - - INTERFACE h5pset_f - MODULE PROCEDURE h5pset_integer - MODULE PROCEDURE h5pset_real - MODULE PROCEDURE h5pset_char - ! Recommended procedure: - MODULE PROCEDURE h5pset_ptr - - END INTERFACE - - INTERFACE h5pget_f - MODULE PROCEDURE h5pget_integer - MODULE PROCEDURE h5pget_real - MODULE PROCEDURE h5pget_char - ! Recommended procedure: - MODULE PROCEDURE h5pget_ptr - END INTERFACE - - INTERFACE h5pregister_f - MODULE PROCEDURE h5pregister_integer - MODULE PROCEDURE h5pregister_real - MODULE PROCEDURE h5pregister_char - ! Recommended procedure: - MODULE PROCEDURE h5pregister_ptr - END INTERFACE - - INTERFACE h5pinsert_f - MODULE PROCEDURE h5pinsert_integer - MODULE PROCEDURE h5pinsert_real - MODULE PROCEDURE h5pinsert_char - ! Recommended procedure: - MODULE PROCEDURE h5pinsert_ptr - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pget_fill_value_c(prp_id, type_id, fillvalue) & - BIND(C, NAME='h5pget_fill_value_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - TYPE(C_PTR), VALUE :: fillvalue ! Fillvalue - END FUNCTION h5pget_fill_value_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pset_fill_value_c(prp_id, type_id, fillvalue) & - BIND(C, NAME='h5pset_fill_value_c') - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - TYPE(C_PTR), VALUE :: fillvalue ! Fillvalue - END FUNCTION h5pset_fill_value_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pset_c(prp_id, name, name_len, value) & - BIND(C, NAME='h5pset_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name ! Name of property to modify - INTEGER :: name_len - TYPE(C_PTR), VALUE :: value ! Property value - END FUNCTION h5pset_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pget_c(prp_id, name, name_len, value) & - BIND(C, NAME='h5pget_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name ! Name of property to modify - INTEGER :: name_len - TYPE(C_PTR), VALUE :: value ! Property value - END FUNCTION h5pget_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pregister_c(class, name, name_len, size, value) & - BIND(C, NAME='h5pregister_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - TYPE(C_PTR), INTENT(IN), VALUE :: value - END FUNCTION h5pregister_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5pinsert_c(plist, name, name_len, size, value) & - BIND(C, NAME='h5pinsert_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: plist - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - TYPE(C_PTR), INTENT(IN), VALUE :: value - END FUNCTION h5pinsert_c - END INTERFACE - -CONTAINS - -! -!****s* H5P (F03)/h5pset_fill_value_f_F90 -! -! NAME -! h5pset_fill_value_f -! -! PURPOSE -! Sets fill value for a dataset creation property list -! -! Inputs: -! prp_id - Property list identifier -! type_id - Datatype identifier of fill value datatype (in memory) -! fillvalue - Fillvalue -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Added the recommended way of passing fillvalue -! and that is by passing the C address, all other -! ways are obsolete and should be avoided. June, 2008 MSB -! -! NOTES -! h5pset(get)fill_value_f function is overloaded to support -! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. -! -! Fortran90 Interface: -!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! IMPLICIT NONE -!! INTEGER(HID_T), INTENT(IN) :: prp_id -!! INTEGER(HID_T), INTENT(IN) :: type_id -!! TYPE(VOID) , INTENT(IN) :: fillvalue -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - - SUBROUTINE h5pset_fill_value_integer(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - INTEGER, INTENT(IN), TARGET :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr ! C address - - f_ptr = C_LOC(fillvalue) - - hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr) - - END SUBROUTINE h5pset_fill_value_integer -! -!****s* H5P (F03)/h5pget_fill_value_f_F90 -! -! NAME -! h5pget_fill_value_f -! -! PURPOSE -! Gets fill value for a dataset creation property list -! -! Inputs: -! prp_id - Property list identifier -! type_id - Datatype identifier of fill value datatype (in memory) -! -! Outputs: -! fillvalue - Fillvalue -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Added the recommended way of passing fillvalue -! and that is by passing the C address, all other -! ways are obsolete and should be avoided. June, 2008 MSB -! -! NOTES -! h5pget(get)fill_value_f function is overloaded to support -! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. -! -! Fortran90 Interface: -!! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id -!! INTEGER(HID_T), INTENT(IN) :: type_id -!! TYPE(VOID) , INTENT(OUT) :: fillvalue -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5pget_fill_value_integer(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - INTEGER, INTENT(OUT), TARGET :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr ! C address - - f_ptr = C_LOC(fillvalue) - - hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr) - - END SUBROUTINE h5pget_fill_value_integer - - - SUBROUTINE h5pset_fill_value_real(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - REAL, INTENT(IN), TARGET :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr ! C address - - f_ptr = C_LOC(fillvalue) - - hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr) - - END SUBROUTINE h5pset_fill_value_real - - - SUBROUTINE h5pget_fill_value_real(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - REAL, INTENT(OUT), TARGET :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr ! C address - - f_ptr = C_LOC(fillvalue) - - hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr) - - END SUBROUTINE h5pget_fill_value_real - - SUBROUTINE h5pset_fill_value_char(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - CHARACTER, INTENT(IN), TARGET :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - TYPE(C_PTR) :: f_ptr ! C address - - f_ptr = C_LOC(fillvalue) - - hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr) - - END SUBROUTINE h5pset_fill_value_char - - SUBROUTINE h5pget_fill_value_char(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - CHARACTER, INTENT(OUT) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER :: i - CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr - INTEGER :: chr_len - - TYPE(C_PTR) :: f_ptr ! C address - ! To resolve Issue #1 outlined in the preamble of this file we - ! need to pack the character string into an array. - - chr_len = LEN(fillvalue) - ALLOCATE(chr(1:chr_len), STAT=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - f_ptr = C_LOC(chr(1)(1:1)) - - hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr) - - DO i = 1, chr_len - fillvalue(i:i) = chr(i) - ENDDO - DEALLOCATE(chr) - - END SUBROUTINE h5pget_fill_value_char -! -!****s* H5P (F03)/h5pset_fill_value_f_F03 -! -! NAME -! h5pset_fill_value_f -! -! PURPOSE -! Sets fill value for a dataset creation property list -! -! Inputs: -! prp_id - Property list identifier -! type_id - Datatype identifier of fill value datatype (in memory) -! fillvalue - Fillvalue -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Added the recommended way of passing fillvalue -! and that is by passing the C address, all other -! ways are obsolete and should be avoided. June, 2008 MSB -! -! NOTES -! h5pset(get)fill_value_f function is overloaded to support -! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. -! -! Fortran2003 Interface: -!! SUBROUTINE h5pset_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id -!! INTEGER(HID_T), INTENT(IN) :: type_id -!! TYPE(C_PTR) , INTENT(IN) :: fillvalue -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5pset_fill_value_ptr(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - TYPE(C_PTR), INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - hdferr = h5pset_fill_value_c(prp_id, type_id, fillvalue) - - END SUBROUTINE h5pset_fill_value_ptr - -! -!****s* H5P (F03)/h5pget_fill_value_f_F03 -! -! NAME -! h5pget_fill_value_f -! -! PURPOSE -! Gets fill value for a dataset creation property list -! -! Inputs: -! prp_id - Property list identifier -! type_id - Datatype identifier of fill value datatype (in memory) -! -! Outputs: -! fillvalue - Fillvalue -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! Added the recommended way of passing fillvalue -! and that is by passing the C address, all other -! ways are obsolete and should be avoided. June, 2008 MSB -! -! NOTES -! h5pget(get)fill_value_f function is overloaded to support -! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. -! -! Fortran2003 Interface: -!! SUBROUTINE h5pget_fill_value_f(prp_id, type_id, fillvalue, hdferr) -!! INTEGER(HID_T), INTENT(IN) :: prp_id -!! INTEGER(HID_T), INTENT(IN) :: type_id -!! TYPE(C_PTR) , INTENT(OUT) :: fillvalue -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5pget_fill_value_ptr(prp_id, type_id, fillvalue, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - TYPE(C_PTR), INTENT(OUT) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - hdferr = h5pget_fill_value_c(prp_id, type_id, fillvalue) - - END SUBROUTINE h5pget_fill_value_ptr - -! -!****s* H5P (F03)/h5pset_f_F90 -! -! NAME -! h5pset_f -! -! PURPOSE -! Sets a property list value -! -! Inputs: -! prp_id - Property list identifier to modify -! name - Name of property to modify -! value - Property value, supported types are: -! INTEGER -! REAL -! DOUBLE PRECISION -! CHARACTER(LEN=*) -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: -!! SUBROUTINE h5pset_f(plid, name, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: plid -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! TYPE , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pset_integer(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - INTEGER, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - - END SUBROUTINE h5pset_integer - - SUBROUTINE h5pset_real(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - REAL, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - - END SUBROUTINE h5pset_real - - SUBROUTINE h5pset_char(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - INTEGER :: i - CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr - INTEGER :: chr_len - - TYPE(C_PTR) :: f_ptr - ! To resolve Issue #1 outlined in the preamble of this file we - ! need to pack the character string into an array. - - chr_len = LEN(value) - ALLOCATE(chr(1:chr_len), STAT=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - DO i = 1, chr_len - chr(i) = value(i:i) - ENDDO - - f_ptr = C_LOC(chr(1)(1:1)) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - - DEALLOCATE(chr) - - END SUBROUTINE h5pset_char -! -!****s* H5P (F03)/h5pget_f_F90 -! -! NAME -! h5pget_f -! -! PURPOSE -! Queries the value of a property. -! -! Inputs: -! prp_id - Property list identifier to modify -! name - Name of property to get -! value - Property value, supported types are: -! INTEGER -! REAL -! DOUBLE PRECISION -! CHARACTER(LEN=*) -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran90 Interface: -!! SUBROUTINE h5pget_f(plid, name, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: plid -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! TYPE , INTENT(OUT) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5pget_integer(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - INTEGER, INTENT(OUT), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - - END SUBROUTINE h5pget_integer - - SUBROUTINE h5pget_real(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - REAL, INTENT(OUT), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - END SUBROUTINE h5pget_real - - SUBROUTINE h5pget_char(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - CHARACTER(LEN=*), INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - INTEGER :: i - CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr - INTEGER :: chr_len - TYPE(C_PTR) :: f_ptr - - chr_len = LEN(value) - ALLOCATE(chr(1:chr_len), STAT=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - f_ptr = C_LOC(chr(1)(1:1)) - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, f_ptr) - - DO i = 1, chr_len - value(i:i) = chr(i) - ENDDO - - DEALLOCATE(chr) - - END SUBROUTINE h5pget_char - - -! -!****s* H5P (F03)/h5pset_f_F03 -! -! NAME -! h5pset_f -! -! PURPOSE -! Sets a property list value -! -! Inputs: -! prp_id - Property list identifier to modify -! name - Name of property to modify -! value - Pointer to value to set the property to -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran2003 Interface: -!! SUBROUTINE h5pset_f(plid, name, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: plid -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! TYPE(C_PTR) , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pset_ptr(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - TYPE(C_PTR), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - name_len = LEN(name) - hdferr = h5pset_c(prp_id, name, name_len, value) - - END SUBROUTINE h5pset_ptr -! -!****s* H5P (F03)/h5pget_f_F03 -! -! NAME -! h5pget_f (F03) -! -! PURPOSE -! Queries the value of a property. -! -! Inputs: -! prp_id - Property list identifier to modify -! name - Name of property to get -! value - Pointer to a location to which to copy the value of of the property -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! Fortran2003 Interface: -!! SUBROUTINE h5pget_f(plid, name, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: plid -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! TYPE(C_PTR) , INTENT(OUT) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pget_ptr(prp_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - TYPE(C_PTR), INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - name_len = LEN(name) - hdferr = h5pget_c(prp_id, name, name_len, value) - - END SUBROUTINE h5pget_ptr - - -! -!****s* H5P (F03)/h5pregister_f_F90 -! -! NAME -! h5pregister -! -! PURPOSE -! Registers a permanent property with a property list class. -! -! Inputs: -! class - Property list class identifier -! name - Name of property to register -! size - Size of the property value -! value - Property value, supported types are: -! INTEGER -! REAL -! DOUBLE PRECISION -! CHARACTER(LEN=*) -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! -! Fortran90 Interface: -!! SUBROUTINE h5pregister_f(class, name, size, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: class -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! INTEGER(SIZE_T) , INTENT(IN) :: size -!! TYPE , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pregister_integer(class, name, size, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - INTEGER, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pregister_c(class, name, name_len, size, f_ptr) - - END SUBROUTINE h5pregister_integer - - SUBROUTINE h5pregister_real(class, name, size, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! size of the property value - REAL, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(value) - - name_len = LEN(name) - hdferr = h5pregister_c(class, name, name_len, size, f_ptr) - - END SUBROUTINE h5pregister_real - - SUBROUTINE h5pregister_char(class, name, size, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! size of the property value - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - INTEGER :: i - CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr - INTEGER :: chr_len - - TYPE(C_PTR) :: f_ptr - ! To resolve Issue #1 outlined in the preamble of this file we - ! need to pack the character string into an array. - - chr_len = LEN(value) - ALLOCATE(chr(1:chr_len), STAT=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - DO i = 1, chr_len - chr(i) = value(i:i) - ENDDO - - f_ptr = C_LOC(chr(1)(1:1)) - - name_len = LEN(name) - hdferr = h5pregister_c(class, name, name_len, size, f_ptr) - DEALLOCATE(chr) - END SUBROUTINE h5pregister_char -! -!****s* H5P (F03)/h5pregister_f_F03 -! -! NAME -! h5pregister (F03) -! -! PURPOSE -! Registers a permanent property with a property list class. -! -! Inputs: -! class - Property list class identifier -! name - Name of property to register -! size - Size of the property value -! value - Pointer to value to set the property to -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! June 24, 2008 -! -! Fortran2003 Interface: -!! SUBROUTINE h5pregister_f(class, name, size, value, hdferr) -!! INTEGER(HID_T) , INTENT(IN) :: class -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! INTEGER(SIZE_T) , INTENT(IN) :: size -!! TYPE(C_PTR) , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - - SUBROUTINE h5pregister_ptr(class, name, size, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - TYPE(C_PTR), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - name_len = LEN(name) - hdferr = h5pregister_c(class, name, name_len, size, value) - END SUBROUTINE h5pregister_ptr - -! -!****s* H5P (F03)/h5pinsert_f_F90 -! -! NAME -! h5pinsert (f90) -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! Inputs: -! plist - Property list class identifier -! name - Name of property to insert -! size - Size of the property value -! value - Property value, supported types are: -! INTEGER -! REAL -! DOUBLE PRECISION -! CHARACTER(LEN=*) -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! -! Fortran90 Interface: -!! SUBROUTINE h5pinsert_f -!! INTEGER(HID_T) , INTENT(IN) :: plist -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! INTEGER(SIZE_T) , INTENT(IN) :: size -!! TYPE , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pinsert_integer(plist, name, size, value, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - INTEGER, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(c_ptr) :: f_ptr - - f_ptr = c_loc(value) - - name_len = LEN(name) - hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr) - END SUBROUTINE h5pinsert_integer - - SUBROUTINE h5pinsert_real(plist, name, size, value, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - REAL, INTENT(IN), TARGET :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - TYPE(c_ptr) :: f_ptr - - f_ptr = c_loc(value) - - name_len = LEN(name) - hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr) - - END SUBROUTINE h5pinsert_real - - SUBROUTINE h5pinsert_char(plist, name, size, value, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of property value - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - INTEGER :: i - CHARACTER(LEN=1), ALLOCATABLE, DIMENSION(:), TARGET :: chr - INTEGER :: chr_len - - TYPE(c_ptr) :: f_ptr - ! To resolve Issue #1 outlined in the preamble of this file we - ! need to pack the character string into an array. - - chr_len = LEN(value) - ALLOCATE(chr(1:chr_len), STAT=hdferr) - IF (hdferr .NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - - DO i = 1, chr_len - chr(i) = value(i:i) - ENDDO - - f_ptr = C_LOC(chr(1)(1:1)) - - name_len = LEN(name) - hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr) - - DEALLOCATE(chr) - - END SUBROUTINE h5pinsert_char - -! -!****s* H5P (F03)/h5pinsert_f_F03 -! -! NAME -! h5pinsert (f03) -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! Inputs: -! plist - Property list class identifier -! name - Name of property to insert -! size - Size of the property value -! value - Pointer to new value pointer for the property being modified -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! June 24, 2008 -! -! Fortran90 Interface: -!! SUBROUTINE h5pinsert_f -!! INTEGER(HID_T) , INTENT(IN) :: plist -!! CHARACTER(LEN=*), INTENT(IN) :: name -!! INTEGER(SIZE_T) , INTENT(IN) :: size -!! TYPE(C_PTR) , INTENT(IN) :: value -!! INTEGER , INTENT(OUT) :: hdferr -!***** - SUBROUTINE h5pinsert_ptr(plist, name, size, value, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of property value - TYPE(c_ptr), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER :: name_len - - name_len = LEN(name) - hdferr = h5pinsert_c(plist, name , name_len, size, value) - END SUBROUTINE h5pinsert_ptr -! -!****s* H5P (F03)/h5pcreate_class_f_F03 -! -! NAME -! h5pcreate_class_f -! -! PURPOSE -! Create a new property list class -! -! Inputs: -! parent - Parent property list class identifier -! Possible values include: -! H5P_ROOT_F -! H5P_FILE_CREATE_F -! H5P_FILE_ACCESS_F -! H5P_DATASET_CREATE_F -! H5P_DATASET_XFER_F -! H5P_FILE_MOUNT_F -! name - Name of property to create -! -! Outputs: -! class - Property list class identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! Optional parameters: -! H5P_cls_create_func_t (create) - Callback routine called when a property list is created -! create_data - User pointer to any class creation information needed -! H5P_cls_copy_func_t (copy) - Callback routine called when a property list is copied -! copy_data - User pointer to any class copy information needed -! H5P_cls_close_func_t (close) - Callback routine called when a property list is being closed -! close_data - User pointer to any class close information needed -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! HISTORY -! Added callback arguments -! M. Scot Breitenfeld, July 3, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5pcreate_class_f(parent, name, class, hdferr, create, create_data, copy, copy_data, close, close_data) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: parent - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(HID_T) , INTENT(OUT) :: class - INTEGER , INTENT(OUT) :: hdferr - TYPE(C_PTR) , OPTIONAL :: create_data, copy_data, close_data - TYPE(C_FUNPTR) , OPTIONAL :: create, copy, close -!***** - INTEGER :: name_len - TYPE(C_PTR) :: create_data_default, copy_data_default, close_data_default - TYPE(C_FUNPTR) :: create_default, copy_default, close_default - INTERFACE - INTEGER FUNCTION h5pcreate_class_c(parent, name, name_len, class, & - create, create_data, copy, copy_data, close, close_data) & - BIND(C, NAME='h5pcreate_class_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr, c_funptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: parent - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(HID_T), INTENT(OUT) :: class - TYPE(C_PTR), VALUE :: create_data, copy_data, close_data - TYPE(C_FUNPTR), VALUE :: create, copy, close - END FUNCTION h5pcreate_class_c - END INTERFACE - name_len = LEN(name) - - create_default = c_null_funptr !fix:scot - create_data_default = c_null_ptr - copy_default = c_null_funptr !fix:scot - copy_data_default = c_null_ptr - close_default = c_null_funptr !fix:scot - close_data_default = c_null_ptr - - IF(PRESENT(create)) create_default = create - IF(PRESENT(create_data)) create_data_default = create_data - IF(PRESENT(copy)) copy_default = copy - IF(PRESENT(copy_data)) copy_data_default = copy_data - IF(PRESENT(close)) close_default = close - IF(PRESENT(close_data)) close_data_default = close_data - - hdferr = h5pcreate_class_c(parent, name , name_len, class, & - create_default, create_data_default, & - copy_default, copy_data_default, & - close_default, close_data_default) - - END SUBROUTINE h5pcreate_class_f - -! -!****s* H5P (F03)/h5pset_file_image_f_F03 -! -! NAME -! h5pset_file_image_f -! -! PURPOSE -! Sets an initial file image in a memory buffer. -! -! Inputs: -! fapl_id - File access property list identifier -! buf_ptr - Pointer to the initial file image, -! or C_NULL_PTR if no initial file image is desired -! buf_len - Size of the supplied buffer, or 0 (zero) if no initial image is desired -! -! Outputs: -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! February 19, 2012 -! -! Fortran2003 Interface: - SUBROUTINE h5pset_file_image_f(fapl_id, buf_ptr, buf_len, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: fapl_id - TYPE(C_PTR) , INTENT(IN) :: buf_ptr - INTEGER(SIZE_T), INTENT(IN) :: buf_len - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5pset_file_image_c(fapl_id, buf_ptr, buf_len) & - BIND(C, NAME='h5pset_file_image_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: fapl_id - TYPE(C_PTR), VALUE :: buf_ptr - INTEGER(SIZE_T), INTENT(IN) :: buf_len - END FUNCTION h5pset_file_image_c - END INTERFACE - - hdferr = h5pset_file_image_c(fapl_id, buf_ptr, buf_len) - - END SUBROUTINE h5pset_file_image_f -! -!****s* H5P (F03)/h5pget_file_image_f_F03 -! -! NAME -! h5pget_file_image_f -! -! PURPOSE -! Retrieves a copy of the file image designated as the initial content and structure of a file. -! -! Inputs: -! fapl_id - File access property list identifier. -! -! Outputs: -! buf_ptr - Will hold either a C_NULL_PTR or a scalar of type -! c_loc. If buf_ptr is not C_NULL_PTR, on successful -! return, buf_ptr shall contain a C pointer to a copy -! of the initial image provided in the last call to -! H5Pset_file_image_f for the supplied fapl_id, or -! buf_ptr shall contain a C_NULL_PTR if there is no -! initial image set. -! -! buf_len_ptr - Contains the value of the buffer parameter for -! the initial image in the supplied fapl_id. The value -! will be 0 if no initial image is set. -! -! -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! February 19, 2012 -! -! Fortran2003 Interface: - SUBROUTINE h5pget_file_image_f(fapl_id, buf_ptr, buf_len_ptr, hdferr) - USE iso_c_binding - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: fapl_id - TYPE(C_PTR) , INTENT(OUT), DIMENSION(*) :: buf_ptr - INTEGER(SIZE_T), INTENT(OUT) :: buf_len_ptr - INTEGER , INTENT(OUT) :: hdferr - -!***** - INTERFACE - INTEGER FUNCTION h5pget_file_image_c(fapl_id, buf_ptr, buf_len_ptr) & - BIND(C, NAME='h5pget_file_image_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: fapl_id - TYPE(C_PTR), DIMENSION(*), INTENT(OUT) :: buf_ptr - INTEGER(SIZE_T), INTENT(OUT) :: buf_len_ptr - END FUNCTION h5pget_file_image_c - END INTERFACE - - hdferr = h5pget_file_image_c(fapl_id, buf_ptr, buf_len_ptr) - - END SUBROUTINE h5pget_file_image_f - -END MODULE H5P_PROVISIONAL - diff --git a/fortran/src/H5Pff_F90.f90 b/fortran/src/H5Pff_F90.f90 deleted file mode 100644 index b5ea13d..0000000 --- a/fortran/src/H5Pff_F90.f90 +++ /dev/null @@ -1,949 +0,0 @@ -!****h* ROBODoc/H5P (_F90) -! -! NAME -! H5P_PROVISIONAL -! -! PURPOSE -! -! This file contains Fortran 90 interfaces for H5P functions. It contains -! the same functions as H5Pff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Pff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5P function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5P_PROVISIONAL - - USE H5GLOBAL - - INTERFACE h5pset_fill_value_f - MODULE PROCEDURE h5pset_fill_value_integer - MODULE PROCEDURE h5pset_fill_value_real - MODULE PROCEDURE h5pset_fill_value_char - END INTERFACE - - INTERFACE h5pget_fill_value_f - MODULE PROCEDURE h5pget_fill_value_integer - MODULE PROCEDURE h5pget_fill_value_real - MODULE PROCEDURE h5pget_fill_value_char - END INTERFACE - - INTERFACE h5pset_f - MODULE PROCEDURE h5pset_integer - MODULE PROCEDURE h5pset_real - MODULE PROCEDURE h5pset_char - END INTERFACE - - INTERFACE h5pget_f - MODULE PROCEDURE h5pget_integer - MODULE PROCEDURE h5pget_real - MODULE PROCEDURE h5pget_char - END INTERFACE - - INTERFACE h5pregister_f - MODULE PROCEDURE h5pregister_integer - MODULE PROCEDURE h5pregister_real - MODULE PROCEDURE h5pregister_char - END INTERFACE - - INTERFACE h5pinsert_f - MODULE PROCEDURE h5pinsert_integer - MODULE PROCEDURE h5pinsert_real - MODULE PROCEDURE h5pinsert_char - END INTERFACE - -CONTAINS -! -!****s* H5P (F90)/h5pset(get)fill_value_f -! -! NAME -! h5pset(get)fill_value_f -! -! PURPOSE -! Sets(gets) fill value for a dataset creation property list -! -! INPUTS -! prp_id - dataset creation property list identifier -! type_id - datatype identifier for fill value -! fillvalue - fill value -! OUTPUTS -! type_id - datatype identifier for fill value -! fillvalue - fill value -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 14, 2001 -! -! NOTES -! h5pset(get)fill_value_f function is overloaded to support -! INTEGER, REAL, DOUBLE PRECISION and CHARACTER dtatypes. -! -! SOURCE - SUBROUTINE h5pset_fill_value_integer(prp_id, type_id, fillvalue, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - INTEGER, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5pset_fill_value_integer_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_VALUE_INTEGER_C'::h5pset_fill_value_integer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: fillvalue - END FUNCTION h5pset_fill_value_integer_c - END INTERFACE - - hdferr = h5pset_fill_value_integer_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pset_fill_value_integer - - - SUBROUTINE h5pget_fill_value_integer(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - INTEGER, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pget_fill_value_integer_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_VALUE_INTEGER_C'::h5pget_fill_value_integer_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER :: fillvalue - END FUNCTION h5pget_fill_value_integer_c - END INTERFACE - - hdferr = h5pget_fill_value_integer_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pget_fill_value_integer - - - SUBROUTINE h5pset_fill_value_real(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - REAL, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pset_fill_value_real_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_VALUE_REAL_C'::h5pset_fill_value_real_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - REAL, INTENT(IN) :: fillvalue - END FUNCTION h5pset_fill_value_real_c - END INTERFACE - - hdferr = h5pset_fill_value_real_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pset_fill_value_real - - - SUBROUTINE h5pget_fill_value_real(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - REAL, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pget_fill_value_real_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_VALUE_REAL_C'::h5pget_fill_value_real_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - REAL :: fillvalue - END FUNCTION h5pget_fill_value_real_c - END INTERFACE - - hdferr = h5pget_fill_value_real_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pget_fill_value_real - - SUBROUTINE h5pset_fill_value_char(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - CHARACTER, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pset_fill_valuec_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_VALUEC_C'::h5pset_fill_valuec_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: fillvalue - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER, INTENT(IN) :: fillvalue - END FUNCTION h5pset_fill_valuec_c - END INTERFACE - - hdferr = h5pset_fill_valuec_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pset_fill_value_char - - SUBROUTINE h5pget_fill_value_char(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - CHARACTER, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pget_fill_valuec_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_VALUEC_C'::h5pget_fill_valuec_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: fillvalue - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER :: fillvalue - END FUNCTION h5pget_fill_valuec_c - END INTERFACE - - hdferr = h5pget_fill_valuec_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pget_fill_value_char -! -!****s* H5P (F90)/h5pset_integer -! -! NAME -! h5pset_integer -! -! PURPOSE -! Sets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! value - value to set property to -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pset_integer(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - INTEGER, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pset_integer_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_INTEGER_C'::h5pset_integer_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER, INTENT(IN) :: value - END FUNCTION h5pset_integer_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pset_integer_c(prp_id, name , name_len, value) - END SUBROUTINE h5pset_integer - -! -!****s* H5P (F90)/h5pset_real -! -! NAME -! h5pset_real -! -! PURPOSE -! Sets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! value - value to set property to -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pset_real(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - REAL, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pset_real_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_REAL_C'::h5pset_real_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - REAL, INTENT(IN) :: value - END FUNCTION h5pset_real_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pset_real_c(prp_id, name , name_len, value) - END SUBROUTINE h5pset_real - -!****s* H5P (F90)/h5pset_char -! -! NAME -! h5pset_char -! -! PURPOSE -! Sets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! value - value to set property to -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! SOURCE - SUBROUTINE h5pset_char(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - INTEGER :: value_len - - INTERFACE - INTEGER FUNCTION h5psetc_c(prp_id, name, name_len, value, value_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSETC_C'::h5psetc_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: value - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - CHARACTER(LEN=*), INTENT(IN) :: value - INTEGER, INTENT(IN) :: value_len - END FUNCTION h5psetc_c - END INTERFACE - - name_len = LEN(name) - value_len = LEN(value) - hdferr = h5psetc_c(prp_id, name , name_len, value, value_len) - END SUBROUTINE h5pset_char - -!****s* H5P (F90)/h5pget_integer -! -! NAME -! h5pget_integer -! -! PURPOSE -! Gets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! OUTPUTS -! value - value of property -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pget_integer(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - INTEGER, INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pget_integer_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_INTEGER_C'::h5pget_integer_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER, INTENT(OUT) :: value - END FUNCTION h5pget_integer_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pget_integer_c(prp_id, name , name_len, value) - END SUBROUTINE h5pget_integer - -! -!****s* H5P (F90)/h5pget_real -! -! NAME -! h5pget_real -! -! PURPOSE -! Gets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! OUTPUTS -! value - value of property -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! SOURCE - SUBROUTINE h5pget_real(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - REAL, INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pget_real_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_REAL_C'::h5pget_real_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - REAL, INTENT(OUT) :: value - END FUNCTION h5pget_real_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pget_real_c(prp_id, name , name_len, value) - END SUBROUTINE h5pget_real - -! -!****s* H5P (F90)/h5pget_char -! -! NAME -! h5pget_char -! -! PURPOSE -! Gets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! OUTPUTS -! value - value of property -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pget_char(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - CHARACTER(LEN=*), INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - INTEGER :: value_len - - INTERFACE - INTEGER FUNCTION h5pgetc_c(prp_id, name, name_len, value, value_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGETC_C'::h5pgetc_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: value - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - CHARACTER(LEN=*), INTENT(OUT) :: value - INTEGER, INTENT(IN) :: value_len - END FUNCTION h5pgetc_c - END INTERFACE - - name_len = LEN(name) - value_len = LEN(value) - hdferr = h5pgetc_c(prp_id, name , name_len, value, value_len) - END SUBROUTINE h5pget_char - -! -!****s* H5P (F90)/h5pregister_integer -! -! NAME -! h5pregister_integer -! -! PURPOSE -! Registers a permanent property with a property list class. -! -! INPUTS -! class - property list class to register -! permanent property within -! name - name of property to register -! size - size of property in bytes -! value - default value for property in newly -! created property lists -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! -! SOURCE - SUBROUTINE h5pregister_integer(class, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - INTEGER, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pregister_integer_c(class, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREGISTER_INTEGER_C'::h5pregister_integer_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - INTEGER, INTENT(IN) :: value - END FUNCTION h5pregister_integer_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pregister_integer_c(class, name , name_len, size, value) - END SUBROUTINE h5pregister_integer - -!****s* H5P (F90)/h5pregister_real -! -! NAME -! -! h5pregister_real -! -! PURPOSE Registers a permanent property with a property list class. -! -! INPUTS -! class - property list class to register -! permanent property within -! name - name of property to register -! size - size of property in bytes -! value - default value for property in newly -! created property lists -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE - SUBROUTINE h5pregister_real(class, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! size of the property value - REAL, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pregister_real_c(class, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREGISTER_REAL_C'::h5pregister_real_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - REAL, INTENT(IN) :: value - END FUNCTION h5pregister_real_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pregister_real_c(class, name , name_len, size, value) - END SUBROUTINE h5pregister_real - -! -!****s* H5P (F90)/h5pregister_char -! -! NAME -! h5pregister_char -! -! PURPOSE -! Registers a permanent property with a property list class. -! -! INPUTS -! class - property list class to register -! permanent property within -! name - name of property to register -! size - size of property in bytes -! value - default value for property in newly -! created property lists -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE - SUBROUTINE h5pregister_char(class, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! size of the property value - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - INTEGER :: value_len - - INTERFACE - INTEGER FUNCTION h5pregisterc_c(class, name, name_len, size, value, & - value_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREGISTERC_C'::h5pregisterc_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: value - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - CHARACTER(LEN=*), INTENT(IN) :: value - INTEGER, INTENT(IN) :: value_len - END FUNCTION h5pregisterc_c - END INTERFACE - - name_len = LEN(name) - value_len = LEN(value) - hdferr = h5pregisterc_c(class, name , name_len, size, value, value_len) - END SUBROUTINE h5pregister_char -! -!****s* H5P (F90)/h5pinsert_integer -! -! NAME -! h5pinsert_integer -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! INPUTS -! plist - property list identifier -! name - name of property to insert -! size - size of property in bytes -! value - initial value for the property -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE - SUBROUTINE h5pinsert_integer(plist, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - INTEGER, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pinsert_integer_c(plist, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PINSERT_INTEGER_C'::h5pinsert_integer_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: plist - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - INTEGER, INTENT(IN) :: value - END FUNCTION h5pinsert_integer_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pinsert_integer_c(plist, name , name_len, size, value) - END SUBROUTINE h5pinsert_integer - -! -!****s* H5P (F90)/h5pinsert_real -! -! NAME -! h5pinsert_real -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! INPUTS -! plist - property list identifier -! permanent property within -! name - name of property to insert -! size - size of property in bytes -! value - initial value for the property -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE - SUBROUTINE h5pinsert_real(plist, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - REAL, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pinsert_real_c(plist, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PINSERT_REAL_C'::h5pinsert_real_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: plist - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - REAL, INTENT(IN) :: value - END FUNCTION h5pinsert_real_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pinsert_real_c(plist, name , name_len, size, value) - END SUBROUTINE h5pinsert_real - - -! -!****s* H5P (F90)/h5pinsert_char -! -! NAME -! h5pinsert_char -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! INPUTS -! plist - property list identifier -! permanent property within -! name - name of property to insert -! size - size of property in bytes -! value - initial value for the property -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE -SUBROUTINE h5pinsert_char(plist, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of property value - CHARACTER(LEN=*), INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - INTEGER :: value_len - - INTERFACE - INTEGER FUNCTION h5pinsertc_c(plist, name, name_len, size, value, value_len) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PINSERTC_C'::h5pinsertc_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - !DEC$ATTRIBUTES reference :: value - INTEGER(HID_T), INTENT(IN) :: plist - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - CHARACTER(LEN=*), INTENT(IN) :: value - INTEGER, INTENT(IN) :: value_len - END FUNCTION h5pinsertc_c - END INTERFACE - - name_len = LEN(name) - value_len = LEN(value) - hdferr = h5pinsertc_c(plist, name , name_len, size, value, value_len) - END SUBROUTINE h5pinsert_char - -! -!****s* H5P (F90)/h5pcreate_class_f -! -! NAME -! h5pcreate_class_f -! -! PURPOSE -! Create a new property list class -! -! INPUTS -! parent - Property list identifier of the parent class -! Possible values include: -! H5P_ROOT_F -! H5P_FILE_CREATE_F -! H5P_FILE_ACCESS_F -! H5P_DATASET_CREATE_F -! H5P_DATASET_XFER_F -! H5P_FILE_MOUNT_F -! name - name of the class we are creating -! OUTPUTS -! class - property list class identifier -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pcreate_class_f(parent, name, class, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: parent ! parent property list class - ! identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! name of property tocreate - INTEGER(HID_T), INTENT(OUT) :: class ! property list class identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pcreate_class_f90_c(parent, name, name_len, class) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PCREATE_CLASS_F90_C'::h5pcreate_class_f90_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: parent - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(HID_T), INTENT(OUT) :: class - END FUNCTION h5pcreate_class_f90_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pcreate_class_f90_c(parent, name, name_len, class) - - END SUBROUTINE h5pcreate_class_f - -END MODULE H5P_PROVISIONAL - diff --git a/fortran/src/H5Rf.c b/fortran/src/H5Rf.c index 068f24e..9cd9950 100644 --- a/fortran/src/H5Rf.c +++ b/fortran/src/H5Rf.c @@ -1,6 +1,6 @@ /****h* H5Rf/H5Rf * PURPOSE - * This file contains C stubs for H5R Fortran APIs + * This file contains C stubs for H5R Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -24,68 +24,21 @@ #include "H5f90.h" #include "H5Eprivate.h" -/****if* H5Rf/h5rcreate_object_c - * NAME - * h5rcreate_object_c - * PURPOSE - * Call H5Rcreate to create a reference to an object - * INPUTS - * loc_id - file or group identifier - * name - name of the dataset - * namelen - name length - * OUTPUTS - * ref - reference to the object - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, December 1, 1999 - * SOURCE -*/ -int_f -nh5rcreate_object_c(haddr_t_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen) -/******/ -{ - char *c_name = NULL; - hobj_ref_t ref_c; - int_f ret_value = 0; - - /* - * Convert FORTRAN name to C name - */ - if(NULL == (c_name = (char *)HD5f2cstring(name, (size_t)*namelen))) - HGOTO_DONE(FAIL) - - /* - * Call H5Rcreate function. - */ - if(H5Rcreate(&ref_c, *loc_id, c_name, H5R_OBJECT, (hid_t)-1) < 0) - HGOTO_DONE(FAIL) - - /* Copy the reference created */ - *ref = (haddr_t_f)ref_c; - -done: - if(c_name) - HDfree(c_name); - return ret_value; -} /* nh5rcreate_object_c() */ - /****if* H5Rf/h5rcreate_region_c * NAME - * h5rcreate_region_c + * h5rcreate_region_c * PURPOSE - * Call H5Rcreate to create a reference to dataset region - * region + * Call H5Rcreate to create a reference to dataset region + * region * INPUTS - * loc_id - file or group identifier - * name - name of the dataset - * namelen - name length - * space_id - dataset space identifier + * loc_id - file or group identifier + * name - name of the dataset + * namelen - name length + * space_id - dataset space identifier * OUTPUTS - * ref - reference to the dataset region + * ref - reference to the dataset region * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Wednesday, December 1, 1999 @@ -94,7 +47,7 @@ done: * SOURCE */ int_f -nh5rcreate_region_c(int_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *space_id) +h5rcreate_region_c(int_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *space_id) /******/ { char *c_name = NULL; @@ -120,7 +73,7 @@ done: if(c_name) HDfree(c_name); return ret_value; -} /* end nh5rcreate_region_c() */ +} /* end h5rcreate_region_c() */ /****if* H5Rf/h5rcreate_ptr_c * NAME @@ -165,89 +118,6 @@ h5rcreate_ptr_c (void *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *r return ret_value; } -/****if* H5Rf/h5rdereference_region_c - * NAME - * h5rdereference_region_c - * PURPOSE - * Call H5Rdereference to dereference to dataset region - * INPUTS - * dset_id - dataset identifier - * ref - reference to the dataset region - * OUTPUTS - * obj_id - dereferenced dataset identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, December 1, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5rdereference_region_c(hid_t_f *dset_id, int_f *ref, hid_t_f *obj_id) -/******/ -{ - hdset_reg_ref_t ref_c; - hid_t c_obj_id; - int_f ret_value = 0; - - /* Copy the reference to dereference */ - HDmemcpy(&ref_c, ref, H5R_DSET_REG_REF_BUF_SIZE); - - /* - * Call H5Rdereference function. - */ - if((c_obj_id = H5Rdereference2((hid_t)*dset_id, H5P_DEFAULT, H5R_DATASET_REGION, &ref_c)) < 0) - HGOTO_DONE(FAIL) - - /* Copy the object's ID */ - *obj_id = (hid_t_f)c_obj_id; - -done: - return ret_value; -} /* end nh5rdereference_region_c() */ - -/****if* H5Rf/h5rdereference_object_c - * NAME - * h5rdereference_object_c - * PURPOSE - * Call H5Rdereference to dereference an object - * INPUTS - * dset_id - dataset identifier - * ref - reference to an object - * OUTPUTS - * obj_id - dereferenced object identifier - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * Elena Pourmal - * Wednesday, December 1, 1999 - * HISTORY - * - * SOURCE -*/ -int_f -nh5rdereference_object_c(hid_t_f *dset_id, haddr_t_f *ref, hid_t_f *obj_id) -/******/ -{ - hid_t c_obj_id; - hobj_ref_t ref_c = (hobj_ref_t)*ref; - int_f ret_value = 0; - - /* - * Call H5Rdereference function. - */ - if((c_obj_id = H5Rdereference2((hid_t)*dset_id, H5P_DEFAULT, H5R_OBJECT, &ref_c)) < 0) - HGOTO_DONE(FAIL) - - /* Copy the object's ID */ - *obj_id = (hid_t_f)c_obj_id; - -done: - return ret_value; -} /* end nh5rdereference_object_c() */ - /****if* H5Rf/h5rdereference_ptr_c * NAME * h5rdereference_ptr_c @@ -255,7 +125,7 @@ done: * Call H5Rdereference * INPUTS * obj_id - Valid identifier for the file containing the - * referenced object or any object in that file. + * referenced object or any object in that file. * ref_typ - The reference type of ref. * ref - Object reference * OUTPUTS @@ -292,8 +162,8 @@ h5rdereference_ptr_c (hid_t_f *obj_id, int_f *ref_type, void *ref, hid_t_f *ref_ * PURPOSE * Call H5Rget_region to dereference dataspace region * INPUTS - * dset_id - dataset identifier - * ref - reference to the dataset region + * dset_id - dataset identifier + * ref - reference to the dataset region * OUTPUTS * space_id - dereferenced dataset dataspace identifier * RETURNS @@ -306,7 +176,7 @@ h5rdereference_ptr_c (hid_t_f *obj_id, int_f *ref_type, void *ref, hid_t_f *ref_ * SOURCE */ int_f -nh5rget_region_region_c(hid_t_f *dset_id, int_f *ref, hid_t_f *space_id) +h5rget_region_region_c(hid_t_f *dset_id, int_f *ref, hid_t_f *space_id) /******/ { hid_t c_space_id; @@ -327,7 +197,7 @@ nh5rget_region_region_c(hid_t_f *dset_id, int_f *ref, hid_t_f *space_id) done: return ret_value; -} /* end nh5rget_region_region_c() */ +} /* end h5rget_region_region_c() */ /****if* H5Rf/h5rget_region_ptr_c * NAME @@ -335,8 +205,8 @@ done: * PURPOSE * Call H5Rget_region to dereference dataspace region * INPUTS - * dset_id - dataset identifier - * ref - reference to the dataset region + * dset_id - dataset identifier + * ref - reference to the dataset region * OUTPUTS * space_id - dereferenced dataset dataspace identifier * RETURNS @@ -366,22 +236,22 @@ h5rget_region_ptr_c(hid_t_f *dset_id, void *ref, hid_t_f *space_id) done: return ret_value; -} /* end nh5rget_region_ptr_c() */ +} /* end h5rget_region_ptr_c() */ /****if* H5Rf/h5rget_object_type_obj_c * NAME - * h5rget_object_type_obj_c + * h5rget_object_type_obj_c * PURPOSE - * Call H5Rget_object_type to retrieve the type of the object reference points - * to + * Call H5Rget_object_type to retrieve the type of the object reference points + * to * INPUTS - * dset_id - dataset identifier - * ref - reference to the dataset region + * dset_id - dataset identifier + * ref - reference to the dataset region * OUTPUTS - * obj_type - type of dereferenced object + * obj_type - type of dereferenced object * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Wednesday, December 1, 1999 @@ -390,7 +260,7 @@ done: * SOURCE */ int_f -nh5rget_object_type_obj_c(hid_t_f *dset_id, haddr_t_f *ref, int_f *obj_type) +h5rget_object_type_obj_c(hid_t_f *dset_id, haddr_t_f *ref, int_f *obj_type) /******/ { H5O_type_t c_obj_type; @@ -408,125 +278,7 @@ nh5rget_object_type_obj_c(hid_t_f *dset_id, haddr_t_f *ref, int_f *obj_type) done: return ret_value; -} /* end nh5rget_object_type_obj_c() */ - -/****if* H5Rf/h5rget_name_object_c - * NAME - * h5rget_name_object_c - * PURPOSE - * Call H5Rget_name for an object - * INPUTS - * - * loc_id - Identifier for the dataset containing the reference or for the group that dataset is in. - * ref - An object or dataset region reference. - * - * OUTPUTS - * name - A name associated with the referenced object or dataset region. - * size - The size of the name buffer. - * - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * M. Scot Breitenfeld - * March 31, 2008 - * HISTORY - * - * SOURCE -*/ -int_f -nh5rget_name_object_c(hid_t_f *loc_id, haddr_t_f *ref, _fcd name, size_t_f *name_len, size_t_f *size_default) -/******/ -{ - hobj_ref_t ref_c = (hobj_ref_t)*ref; - ssize_t c_size; - size_t c_bufsize = (size_t)*name_len + 1; - char *c_buf = NULL; /* Buffer to hold C string */ - int_f ret_value = 0; - - - /* - * Allocate buffer to hold name of an attribute - */ - if(NULL == (c_buf = (char *)HDmalloc(c_bufsize))) - HGOTO_DONE(FAIL) - - /* - * Call H5Rget_name function. - */ - if((c_size = H5Rget_name((hid_t)*loc_id, H5R_OBJECT, &ref_c, c_buf, c_bufsize)) < 0) - HGOTO_DONE(FAIL) - - /* - * Convert C name to FORTRAN and place it in the given buffer - */ - HD5packFstring(c_buf, _fcdtocp(name), c_bufsize-1); - *size_default = (size_t_f)c_size; - -done: - if(c_buf) - HDfree(c_buf); - return ret_value; -} /* end nh5rget_name_object_c() */ - -/****if* H5Rf/h5rget_name_region_c - * NAME - * h5rget_name_region_c - * PURPOSE - * Call H5Rget_name for a dataset region - * INPUTS - * - * loc_id - Identifier for the dataset containing the reference or for the group that dataset is in. - * ref - An object or dataset region reference. - * - * OUTPUTS - * name - A name associated with the referenced object or dataset region. - * size - The size of the name buffer. - * - * RETURNS - * 0 on success, -1 on failure - * AUTHOR - * M. Scot Breitenfeld - * March 31, 2008 - * HISTORY - * - * SOURCE -*/ -int_f -nh5rget_name_region_c(hid_t_f *loc_id, int_f *ref, _fcd name, size_t_f *name_len, size_t_f *size_default) -/******/ -{ - hdset_reg_ref_t ref_c; - ssize_t c_size; - size_t c_bufsize = (size_t)*name_len + 1; - char *c_buf = NULL; /* Buffer to hold C string */ - int_f ret_value = 0; - - /* Copy the reference to query */ - HDmemcpy(&ref_c, ref, H5R_DSET_REG_REF_BUF_SIZE); - - /* - * Allocate buffer to hold name of an attribute - */ - if(NULL == (c_buf = (char *)HDmalloc(c_bufsize))) - HGOTO_DONE(FAIL) - - /* - * Call H5Rget_name function. - */ - if((c_size = H5Rget_name((hid_t)*loc_id, H5R_DATASET_REGION, &ref_c, c_buf, c_bufsize)) < 0) - HGOTO_DONE(FAIL) - - /* - * Convert C name to FORTRAN and place it in the given buffer - */ - HD5packFstring(c_buf, _fcdtocp(name), c_bufsize - 1); - *size_default = (size_t_f)c_size; - -done: - if(c_buf) - HDfree(c_buf); - return ret_value; -} +} /* end h5rget_object_type_obj_c() */ /****if* H5Rf/h5rget_name_ptr_c * NAME @@ -535,13 +287,13 @@ done: * Call H5Rget_name * INPUTS * - * loc_id - Identifier for the dataset containing the reference or for the group that dataset is in. - * ref_type - Type of reference. - * ref - An object or dataset region reference. + * loc_id - Identifier for the dataset containing the reference or for the group that dataset is in. + * ref_type - Type of reference. + * ref - An object or dataset region reference. * * OUTPUTS - * name - A name associated with the referenced object or dataset region. - * size - The size of the name buffer. + * name - A name associated with the referenced object or dataset region. + * size - The size of the name buffer. * * RETURNS * 0 on success, -1 on failure @@ -589,24 +341,24 @@ h5rget_name_ptr_c (hid_t_f *loc_id, int_f *ref_type, void *ref, _fcd name, size_ /****if* H5Rf/h5rget_obj_type_c * NAME - * h5rget_obj_type_c + * h5rget_obj_type_c * PURPOSE - * Call H5Rget_obj_type + * Call H5Rget_obj_type * INPUTS - * loc_id - Identifier for the dataset containing the reference or - * for the group that dataset is in. - * ref_type - Type of reference to query. - * ref - Reference to query. + * loc_id - Identifier for the dataset containing the reference or + * for the group that dataset is in. + * ref_type - Type of reference to query. + * ref - Reference to query. * * OUTPUTS - * obj_type - Type of referenced object. These are defined in H5Opublic.h, - * enum H5O_type_t + * obj_type - Type of referenced object. These are defined in H5Opublic.h, + * enum H5O_type_t * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * M. Scot Breitenfeld - * December 17, 2008 + * M. Scot Breitenfeld + * December 17, 2008 * * SOURCE */ diff --git a/fortran/src/H5Rff.F90 b/fortran/src/H5Rff.F90 new file mode 100644 index 0000000..a90bd9a --- /dev/null +++ b/fortran/src/H5Rff.F90 @@ -0,0 +1,792 @@ +!****h* ROBODoc/H5R +! +! NAME +! MODULE H5R +! +! FILE +! fortran/src/H5Rff.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5R functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5R function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5R + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR, C_SIGNED_CHAR + USE H5GLOBAL + + ! If you change the value of these parameters, do not forget to change corresponding + ! values in the H5f90.h file. + ! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 + ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 + ! + ! TYPE hobj_ref_t_f + ! INTEGER ref(REF_OBJ_BUF_LEN) + ! END TYPE + ! + ! TYPE hdset_reg_ref_t_f + ! INTEGER ref(REF_REG_BUF_LEN) + ! END TYPE + ! + + INTERFACE h5rget_object_type_f + + MODULE PROCEDURE h5rget_object_type_obj_f + + END INTERFACE + + TYPE :: hdset_reg_ref_t_f03 + INTEGER(C_SIGNED_CHAR), DIMENSION(1:H5R_DSET_REG_REF_BUF_SIZE_F) :: ref + END TYPE hdset_reg_ref_t_f03 + + INTERFACE h5rget_region_f + + MODULE PROCEDURE h5rget_region_region_f ! obsolete + MODULE PROCEDURE h5rget_region_ptr_f ! F2003 + + END INTERFACE + + + INTERFACE h5rcreate_f + + MODULE PROCEDURE h5rcreate_object_f ! obsolete + MODULE PROCEDURE h5rcreate_region_f ! obsolete + MODULE PROCEDURE h5rcreate_ptr_f ! F2003 + + END INTERFACE + + INTERFACE h5rdereference_f + + MODULE PROCEDURE h5rdereference_object_f ! obsolete + MODULE PROCEDURE h5rdereference_region_f ! obsolete + MODULE PROCEDURE h5rdereference_ptr_f ! F2003 + + END INTERFACE + + INTERFACE h5rget_name_f + + MODULE PROCEDURE h5rget_name_object_f ! obsolete + MODULE PROCEDURE h5rget_name_region_f ! obsolete + MODULE PROCEDURE h5rget_name_ptr_f ! F2003 + + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5rget_name_ptr_c(loc_id, ref_type, ref, name, name_len, size_default) & + BIND(C, NAME='h5rget_name_ptr_c') + IMPORT :: c_char, c_ptr + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER, INTENT(IN) :: ref_type + TYPE(C_PTR), INTENT(IN), VALUE :: ref + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T) :: name_len + INTEGER(SIZE_T) :: size_default + END FUNCTION h5rget_name_ptr_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5rdereference_ptr_c(obj_id, ref_type, ref, ref_obj_id) & + BIND(C, NAME='h5rdereference_ptr_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + INTEGER, INTENT(IN) :: ref_type + TYPE(C_PTR), INTENT(IN), VALUE :: ref + INTEGER(HID_T), INTENT(OUT) :: ref_obj_id + END FUNCTION h5rdereference_ptr_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5rcreate_ptr_c(ref, loc_id, name, namelen, ref_type, space_id) & + BIND(C, NAME='h5rcreate_ptr_c') + IMPORT :: c_ptr, c_char + IMPORT :: HID_T + IMPLICIT NONE + TYPE(C_PTR), VALUE :: ref + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER, INTENT(IN) :: ref_type + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5rcreate_ptr_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5rget_region_ptr_c(dset_id, ref, space_id) & + BIND(C, NAME='h5rget_region_ptr_c') + IMPORT :: c_ptr + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + TYPE(C_PTR), VALUE :: ref + INTEGER(HID_T), INTENT(OUT) :: space_id + END FUNCTION h5rget_region_ptr_c + END INTERFACE + + +CONTAINS + +!****s* H5R/h5rget_object_type_obj_f +! +! NAME +! h5rget_object_type_obj_f +! +! PURPOSE +! Retrieves the type of object that an object reference points to. +! +! INPUTS +! dset_id - identifier of the dataset containing +! reference to the objects +! ref - reference to open +! OUTPUTS +! obj_type - object_type, possible values: +! H5G_UNKNOWN_F +! H5G_GROUP_F +! H5G_DATASET_F +! H5G_TYPE_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rget_object_type_f +! subroutine. +! SOURCE + SUBROUTINE h5rget_object_type_obj_f(dset_id, ref, obj_type, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + TYPE(hobj_ref_t_f), INTENT(IN) :: ref ! Object reference + INTEGER, INTENT(OUT) :: obj_type ! Object type + ! H5G_UNKNOWN_F + ! H5G_GROUP_F + ! H5G_DATASET_F + ! H5G_TYPE_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER(HADDR_T) :: ref_f ! Local buffer to pass reference + + INTERFACE + INTEGER FUNCTION h5rget_object_type_obj_c(dset_id, ref_f, obj_type) BIND(C, NAME='h5rget_object_type_obj_c') + IMPORT :: HID_T, HADDR_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER(HADDR_T) :: ref_f + INTEGER, INTENT(OUT) :: obj_type + END FUNCTION h5rget_object_type_obj_c + END INTERFACE + + ref_f = ref%ref + hdferr = h5rget_object_type_obj_c(dset_id, ref_f, obj_type ) + + END SUBROUTINE h5rget_object_type_obj_f + + +!****s* H5R/h5rget_region_region_f +! +! NAME +! h5rget_region_region_f +! +! PURPOSE +! Retrieves a dataspace with the specified region selected +! +! INPUTS +! dset_id - identifier of the dataset containing +! reference to the regions +! ref - reference to open +! OUTPUTS +! space_id - dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rget_region_f subroutine. +! +! SOURCE + SUBROUTINE h5rget_region_region_f(dset_id, ref, space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Dataset region reference + INTEGER(HID_T), INTENT(OUT) :: space_id ! Space identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference + + INTERFACE + INTEGER FUNCTION h5rget_region_region_c(dset_id, ref_f, space_id) BIND(C, NAME='h5rget_region_region_c') + IMPORT :: HID_T, REF_REG_BUF_LEN + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id + INTEGER :: ref_f(REF_REG_BUF_LEN) + INTEGER(HID_T), INTENT(OUT) :: space_id + END FUNCTION h5rget_region_region_c + END INTERFACE + + ref_f = ref%ref + hdferr = h5rget_region_region_c(dset_id, ref_f, space_id ) + + END SUBROUTINE h5rget_region_region_f + +!****s* H5R/h5rget_region_ptr_f +! +! NAME +! h5rget_region_ptr_f +! +! PURPOSE +! Retrieves a dataspace with the specified region +! selected using pointer +! +! INPUTS +! dset_id - identifier of the dataset containing +! reference to the regions +! ref - reference to open +! OUTPUTS +! space_id - dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! August 4, 2012 +! +! NOTES +! This is a module procedure for the h5rget_region_f subroutine. +! +! SOURCE + SUBROUTINE h5rget_region_ptr_f(dset_id, ref, space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier + TYPE(C_PTR), INTENT(IN) :: ref ! Dataset region reference + INTEGER(HID_T), INTENT(OUT) :: space_id ! Space identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + + hdferr = h5rget_region_ptr_c(dset_id, ref, space_id ) + + END SUBROUTINE h5rget_region_ptr_f + + +!****s* H5R (F03)/h5rcreate_object_f +! +! NAME +! h5rcreate_object_f +! +! PURPOSE +! Creates reference to the object +! +! Inputs: +! loc_id - location identifier +! name - name of the object at the specified location +! Outputs: +! ref - reference to the specified object +! hdferr - returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rcreate_f subroutine. +! +! Signature: + SUBROUTINE h5rcreate_object_f(loc_id, name, ref, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the object at location specified + ! by loc_id identifier + TYPE(hobj_ref_t_f), INTENT(INOUT), TARGET :: ref ! Object reference + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(ref) + + namelen = LEN(name) + + hdferr = h5rcreate_ptr_c(f_ptr, loc_id, name, namelen, INT(0), INT(-1,HID_T)) + + END SUBROUTINE h5rcreate_object_f + +!****s* H5R (F90)/h5rcreate_region_f +! +! NAME +! h5rcreate_region_f +! +! PURPOSE +! Creates reference to the dataset region +! +! INPUTS +! loc_id - location identifier +! name - name of the dataset at the specified location +! space_id - dataspace identifier that describes selected region +! OUTPUTS +! ref - reference to the dataset region +! hdferr - returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rcreate_f subroutine. +! +! SOURCE + SUBROUTINE h5rcreate_region_f(loc_id, name, space_id, ref, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset at location specified + ! by loc_id identifier + INTEGER(HID_T), INTENT(IN) :: space_id ! Dataset's dataspace identifier + TYPE(hdset_reg_ref_t_f), INTENT(OUT) :: ref ! Dataset region reference + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTEGER :: namelen ! Name length + INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference + + INTERFACE + INTEGER FUNCTION h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id) BIND(C,NAME='h5rcreate_region_c') + IMPORT :: HID_T, REF_REG_BUF_LEN + IMPORT :: C_CHAR + IMPLICIT NONE + INTEGER :: ref_f(REF_REG_BUF_LEN) + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5rcreate_region_c + END INTERFACE + + namelen = LEN(name) + ref_f = 0 + hdferr = h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id ) + ref%ref = ref_f + + END SUBROUTINE h5rcreate_region_f + +!****s* H5R (F03)/h5rcreate_ptr_f +! +! NAME +! h5rcreate_ptr_f +! +! PURPOSE +! Creates a reference. +! +! Inputs: +! loc_id - location identifier +! name - name of the dataset at the specified location +! ref_type - type of reference: +! H5R_OBJECT +! H5T_STD_REF_DSETREG +! Outputs: +! ref - reference created by the function call. +! hdferr - returns 0 if successful and -1 if fails. +! OPTIONAL +! space_id - dataspace identifier that describes selected region +! +! AUTHOR +! M. Scot Breitenfeld +! June 20, 2008 +! +! NOTES +! This is a module procedure for the h5rcreate_f +! subroutine where the output is a pointer. +! +! Signature: + SUBROUTINE h5rcreate_ptr_f(loc_id, name, ref_type, ref, hdferr, space_id) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier + CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset at location specified + ! by loc_id identifier + INTEGER, INTENT(IN) :: ref_type ! type of reference + TYPE(C_PTR), INTENT(INOUT) :: ref ! Reference created by the function call + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), INTENT(IN), OPTIONAL :: space_id ! Dataset's dataspace identifier +!***** + INTEGER :: namelen ! Name length + INTEGER(HID_T) :: space_id_c + + namelen = LEN(name) + space_id_c = -1 + IF(PRESENT(space_id)) space_id_c = space_id + hdferr = h5rcreate_ptr_c(ref, loc_id, name, namelen, ref_type, space_id_c) + + END SUBROUTINE h5rcreate_ptr_f +!****s* H5R (F03)/h5rdereference_object_f +! +! NAME +! h5rdereference_object_f +! +! PURPOSE +! Opens the HDF5 object referenced +! +! Inputs: +! dset_id - identifier of the dataset containing +! reference +! ref - reference to open +! Outputs: +! obj_id - object_identifier +! hdferr - returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rdereference_f subroutine. +! +! Signature: + SUBROUTINE h5rdereference_object_f(obj_id, ref, ref_obj_id, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Dataset identifier + TYPE(hobj_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference + INTEGER(HID_T), INTENT(OUT) :: ref_obj_id ! Object identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(ref) + hdferr = h5rdereference_ptr_c(obj_id, 0, f_ptr, ref_obj_id) + + END SUBROUTINE h5rdereference_object_f +!****s* H5R (F03)/h5rdereference_region_f +! +! NAME +! h5rdereference_region_f +! +! PURPOSE +! Opens the dataset region +! +! Inputs: +! dset_id - identifier of the dataset containing +! reference to teh regions +! ref - reference to open +! Outputs: +! obj_id - dataspace identifier +! hdferr - returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! NOTES +! This is a module procedure for the h5rdereference_f subroutine. +! +! Signature: + SUBROUTINE h5rdereference_region_f(obj_id, ref, ref_obj_id, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Dataset identifier + TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference + INTEGER(HID_T), INTENT(OUT) :: ref_obj_id ! Dataspace identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(ref) + hdferr = h5rdereference_ptr_c(obj_id, 1, f_ptr, ref_obj_id) + + END SUBROUTINE h5rdereference_region_f + +!****s* H5R (F03)/h5rdereference_ptr_f +! +! NAME +! h5rdereference_ptr_f +! +! PURPOSE +! Opens the HDF5 object referenced. +! +! Inputs: +! obj_id - valid identifier for the file containing the +! referenced object or any object in that file. +! ref_type - the reference type of ref. +! ref - Reference to open. +! Outputs: +! ref_obj_id - identifier of referenced object +! hdferr - returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! June 20, 2008 +! +! NOTES +! This is a module procedure for the h5rdereference_f +! subroutine using pointers. +! +! Signature: + SUBROUTINE h5rdereference_ptr_f(obj_id, ref_type, ref, ref_obj_id, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id ! Valid identifier for the file containing the + ! referenced object or any object in that file. + INTEGER, INTENT(IN) :: ref_type ! The reference type of ref. + TYPE(C_PTR), INTENT(IN) :: ref ! Object reference + INTEGER(HID_T), INTENT(OUT) :: ref_obj_id + ! Identifier of referenced object + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + hdferr = h5rdereference_ptr_c(obj_id, ref_type, ref, ref_obj_id) + + END SUBROUTINE h5rdereference_ptr_f +! +!****s* H5R (F03)/h5rget_name_object_f +! +! NAME +! h5rget_name_object_f +! +! PURPOSE +! Retrieves a name of a referenced object. +! +! Inputs: +! loc_id - Identifier for the file containing the reference or for any object in that file. +! ref - An object or dataset region reference. +! +! Outputs: +! name - A name associated with the referenced object or dataset region. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! size - The size of the name buffer, returning 0 (zero) if no name is associated +! with the identifier. +! +! AUTHOR +! M. Scot Breitenfeld +! March 28, 2008 +! +! Signature: + SUBROUTINE h5rget_name_object_f(loc_id, ref, name, hdferr, size) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + TYPE(hobj_ref_t_f), INTENT(IN), TARGET :: ref + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size + CHARACTER(LEN=*), INTENT(INOUT) :: name + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTEGER(SIZE_T) :: size_default + INTEGER(SIZE_T) :: name_len + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(ref) + + name_len=LEN(name) + + hdferr = h5rget_name_ptr_c(loc_id, 0, f_ptr, name, name_len, size_default) + + IF(PRESENT(size)) size = size_default + + END SUBROUTINE h5rget_name_object_f +!****s* H5R (F03)/h5rget_name_region_f +! +! NAME +! h5rget_name_region_f +! +! PURPOSE +! Retrieves a name of a dataset region. +! +! Inputs: +! loc_id - Identifier for the file containing the reference or for any object in that file. +! ref - An object or dataset region reference. +! +! Outputs: +! name - A name associated with the referenced object or dataset region. +! hdferr - Returns 0 if successful and -1 if fails. +! +! Optional parameters: +! size - The size of the name buffer, returning 0 (zero) if no name is associated with the identifier +! +! AUTHOR +! M. Scot Breitenfeld +! March 28, 2008 +! +! Signature: + SUBROUTINE h5rget_name_region_f(loc_id, ref, name, hdferr, size) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size + CHARACTER(LEN=*), INTENT(INOUT) :: name + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER(SIZE_T) :: size_default + INTEGER(SIZE_T) :: name_len + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(ref) + + name_len=LEN(name) + + hdferr = h5rget_name_ptr_c(loc_id, 1, f_ptr, name, name_len, size_default) + + IF(PRESENT(size)) size = size_default + + END SUBROUTINE h5rget_name_region_f + + !****s* H5R (F03)/h5rget_name_ptr_f + ! + ! NAME + ! h5rget_name_ptr_f + ! + ! PURPOSE + ! Retrieves a name of a referenced object. + ! + ! Inputs: + ! loc_id - Identifier for the file containing the reference or for any object in that file. + ! ref_type - Type of reference. + ! ref - An object or dataset region reference. + ! + ! Outputs: + ! name - A name associated with the referenced object or dataset ptr. + ! hdferr - Returns 0 if successful and -1 if fails. + ! + ! Optional parameters: + ! size - The size of the name buffer, returning 0 (zero) if no name is associated + ! with the identifier + ! + ! AUTHOR + ! M. Scot Breitenfeld + ! March 28, 2008 + ! + ! Signature: + SUBROUTINE h5rget_name_ptr_f(loc_id, ref_type, ref, name, hdferr, size) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER, INTENT(IN) :: ref_type + TYPE(C_PTR), INTENT(IN) :: ref + CHARACTER(LEN=*), INTENT(INOUT) :: name + INTEGER, INTENT(OUT) :: hdferr + INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size +!***** + INTEGER(SIZE_T) :: size_default + INTEGER(SIZE_T) :: name_len + + name_len=LEN(name) + + hdferr = h5rget_name_ptr_c(loc_id, ref_type, ref, name, name_len, size_default) + + IF(PRESENT(size)) size = size_default + + END SUBROUTINE h5rget_name_ptr_f + + !****s* H5R (F03)/h5rget_obj_type_f + ! + ! NAME + ! h5rget_obj_type_f + ! + ! PURPOSE + ! Retrieves the type of object that an object reference points to. + ! + ! Inputs: + ! loc_id - Identifier for the dataset containing the reference or + ! for the group that dataset is in. + ! ref_type - Type of reference to query. + ! ref - Reference to query. + ! + ! Outputs: + ! obj_type - Type of referenced object. + ! H5G_UNKNOWN_F + ! H5G_GROUP_F + ! H5G_DATASET_F + ! H5G_TYPE_F + ! + ! hdferr - Returns 0 if successful and -1 if fails. + ! + ! AUTHOR + ! M. Scot Breitenfeld + ! Decemeber 17, 2008 + ! + ! Signature: + SUBROUTINE h5rget_obj_type_f(loc_id, ref_type, ref, obj_type, hdferr) + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER, INTENT(IN) :: ref_type + TYPE(C_PTR), INTENT(IN) :: ref + INTEGER, INTENT(OUT) :: obj_type + INTEGER, INTENT(OUT) :: hdferr + !***** + + INTERFACE + INTEGER FUNCTION h5rget_obj_type_c(loc_id, ref_type, ref, obj_type) & + BIND(C, NAME='h5rget_obj_type_c') + IMPORT :: C_PTR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER, INTENT(IN) :: ref_type + TYPE(C_PTR), VALUE :: ref + INTEGER :: obj_type + END FUNCTION h5rget_obj_type_c + END INTERFACE + + hdferr = h5rget_obj_type_c(loc_id, ref_type, ref, obj_type) + + END SUBROUTINE h5rget_obj_type_f + +END MODULE H5R diff --git a/fortran/src/H5Rff.f90 b/fortran/src/H5Rff.f90 deleted file mode 100644 index 77a1ff8..0000000 --- a/fortran/src/H5Rff.f90 +++ /dev/null @@ -1,128 +0,0 @@ -!****h* ROBODoc/H5R -! -! NAME -! MODULE H5R -! -! FILE -! fortran/src/H5Rff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5R functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5R function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5R - USE H5GLOBAL - - ! If you change the value of these parameters, do not forget to change corresponding - ! values in the H5f90.h file. - ! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - ! - ! TYPE hobj_ref_t_f - ! INTEGER ref(REF_OBJ_BUF_LEN) - ! END TYPE - ! - ! TYPE hdset_reg_ref_t_f - ! INTEGER ref(REF_REG_BUF_LEN) - ! END TYPE - ! - - INTERFACE h5rget_object_type_f - - MODULE PROCEDURE h5rget_object_type_obj_f - - END INTERFACE - -CONTAINS - -!****s* H5R/h5rget_object_type_obj_f -! -! NAME -! h5rget_object_type_obj_f -! -! PURPOSE -! Retrieves the type of object that an object reference points to. -! -! INPUTS -! dset_id - identifier of the dataset containing -! reference to the objects -! ref - reference to open -! OUTPUTS -! obj_type - object_type, possible values: -! H5G_UNKNOWN_F -! H5G_GROUP_F -! H5G_DATASET_F -! H5G_TYPE_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rget_object_type_f -! subroutine. -! SOURCE - SUBROUTINE h5rget_object_type_obj_f(dset_id, ref, obj_type, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(hobj_ref_t_f), INTENT(IN) :: ref ! Object reference - INTEGER, INTENT(OUT) :: obj_type ! Object type - ! H5G_UNKNOWN_F - ! H5G_GROUP_F - ! H5G_DATASET_F - ! H5G_TYPE_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(HADDR_T) :: ref_f ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rget_object_type_obj_c(dset_id, ref_f, obj_type) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RGET_OBJECT_TYPE_OBJ_C':: h5rget_object_type_obj_c - !DEC$ENDIF - ! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HADDR_T) :: ref_f - INTEGER, INTENT(OUT) :: obj_type - END FUNCTION h5rget_object_type_obj_c - END INTERFACE - - ref_f = ref%ref - hdferr = h5rget_object_type_obj_c(dset_id, ref_f, obj_type ) - - END SUBROUTINE h5rget_object_type_obj_f - -END MODULE H5R diff --git a/fortran/src/H5Rff_F03.f90 b/fortran/src/H5Rff_F03.f90 deleted file mode 100644 index 8f40607..0000000 --- a/fortran/src/H5Rff_F03.f90 +++ /dev/null @@ -1,719 +0,0 @@ -!****h* ROBODoc/H5R (F03) -! -! NAME -! MODULE H5R_PROVISIONAL -! -! FILE -! fortran/src/H5Rff_F03.f90 -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5R functions. -! It contains the same functions as H5Rff_DEPRECIATE.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Rff_DEPRECIATE.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5R function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** -MODULE H5R_PROVISIONAL - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING - - ! If you change the value of these parameters, do not forget to change corresponding - ! values in the H5f90.h file. - ! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - ! - ! TYPE hobj_ref_t_f - ! INTEGER ref(REF_OBJ_BUF_LEN) - ! END TYPE - ! - ! TYPE hdset_reg_ref_t_f - ! INTEGER ref(REF_REG_BUF_LEN) - ! END TYPE - ! - - TYPE :: hdset_reg_ref_t_f03 - INTEGER(C_SIGNED_CHAR), DIMENSION(1:H5R_DSET_REG_REF_BUF_SIZE_F) :: ref - END TYPE hdset_reg_ref_t_f03 - - INTERFACE h5rget_region_f - - MODULE PROCEDURE h5rget_region_region_f ! obsolete - MODULE PROCEDURE h5rget_region_ptr_f ! F2003 - - END INTERFACE - - - INTERFACE h5rcreate_f - - MODULE PROCEDURE h5rcreate_object_f ! obsolete - MODULE PROCEDURE h5rcreate_region_f ! obsolete - MODULE PROCEDURE h5rcreate_ptr_f ! F2003 - - END INTERFACE - - INTERFACE h5rdereference_f - - MODULE PROCEDURE h5rdereference_object_f ! obsolete - MODULE PROCEDURE h5rdereference_region_f ! obsolete - MODULE PROCEDURE h5rdereference_ptr_f ! F2003 - - END INTERFACE - - INTERFACE h5rget_name_f - - MODULE PROCEDURE h5rget_name_object_f ! obsolete - MODULE PROCEDURE h5rget_name_region_f ! obsolete - MODULE PROCEDURE h5rget_name_ptr_f ! F2003 - - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5rget_name_ptr_c(loc_id, ref_type, ref, name, name_len, size_default) & - BIND(C, NAME='h5rget_name_ptr_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER, INTENT(IN) :: ref_type - TYPE(C_PTR), INTENT(IN), VALUE :: ref - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER(SIZE_T) :: name_len - INTEGER(SIZE_T) :: size_default - END FUNCTION h5rget_name_ptr_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5rdereference_ptr_c(obj_id, ref_type, ref, ref_obj_id) & - BIND(C, NAME='h5rdereference_ptr_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: obj_id - INTEGER, INTENT(IN) :: ref_type - TYPE(C_PTR), INTENT(IN), VALUE :: ref - INTEGER(HID_T), INTENT(OUT) :: ref_obj_id - END FUNCTION h5rdereference_ptr_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5rcreate_ptr_c(ref, loc_id, name, namelen, ref_type, space_id) & - BIND(C, NAME='h5rcreate_ptr_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_char, c_ptr - USE H5GLOBAL - TYPE(C_PTR), VALUE :: ref - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER, INTENT(IN) :: ref_type - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5rcreate_ptr_c - END INTERFACE - - INTERFACE - INTEGER FUNCTION h5rget_region_ptr_c(dset_id, ref, space_id) & - BIND(C, NAME='h5rget_region_ptr_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: dset_id - TYPE(C_PTR), VALUE :: ref - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5rget_region_ptr_c - END INTERFACE - -CONTAINS - -!****s* H5R/h5rget_region_region_f -! -! NAME -! h5rget_region_region_f -! -! PURPOSE -! Retrieves a dataspace with the specified region selected -! -! INPUTS -! dset_id - identifier of the dataset containing -! reference to the regions -! ref - reference to open -! OUTPUTS -! space_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rget_region_f subroutine. -! -! SOURCE - SUBROUTINE h5rget_region_region_f(dset_id, ref, space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Dataset region reference - INTEGER(HID_T), INTENT(OUT) :: space_id ! Space identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rget_region_region_c(dset_id, ref_f, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RGET_REGION_REGION_C':: h5rget_region_region_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - INTEGER :: ref_f(REF_REG_BUF_LEN) - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5rget_region_region_c - END INTERFACE - - ref_f = ref%ref - hdferr = h5rget_region_region_c(dset_id, ref_f, space_id ) - - END SUBROUTINE h5rget_region_region_f - -!****s* H5R/h5rget_region_ptr_f -! -! NAME -! h5rget_region_ptr_f -! -! PURPOSE -! Retrieves a dataspace with the specified region -! selected using pointer -! -! INPUTS -! dset_id - identifier of the dataset containing -! reference to the regions -! ref - reference to open -! OUTPUTS -! space_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! August 4, 2012 -! -! NOTES -! This is a module procedure for the h5rget_region_f subroutine. -! -! SOURCE - SUBROUTINE h5rget_region_ptr_f(dset_id, ref, space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(C_PTR), INTENT(IN) :: ref ! Dataset region reference - INTEGER(HID_T), INTENT(OUT) :: space_id ! Space identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - hdferr = h5rget_region_ptr_c(dset_id, ref, space_id ) - - END SUBROUTINE h5rget_region_ptr_f - - -!****s* H5R (F03)/h5rcreate_object_f -! -! NAME -! h5rcreate_object_f -! -! PURPOSE -! Creates reference to the object -! -! Inputs: -! loc_id - location identifier -! name - name of the object at the specified location -! Outputs: -! ref - reference to the specified object -! hdferr - returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rcreate_f subroutine. -! -! Signature: - SUBROUTINE h5rcreate_object_f(loc_id, name, ref, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the object at location specified - ! by loc_id identifier - TYPE(hobj_ref_t_f), INTENT(INOUT), TARGET :: ref ! Object reference - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Name length - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(ref) - - namelen = LEN(name) - - hdferr = h5rcreate_ptr_c(f_ptr, loc_id, name, namelen, INT(0), INT(-1,HID_T)) - - END SUBROUTINE h5rcreate_object_f - -!****s* H5R (F90)/h5rcreate_region_f -! -! NAME -! h5rcreate_region_f -! -! PURPOSE -! Creates reference to the dataset region -! -! INPUTS -! loc_id - location identifier -! name - name of the dataset at the specified location -! space_id - dataspace identifier that describes selected region -! OUTPUTS -! ref - reference to the dataset region -! hdferr - returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rcreate_f subroutine. -! -! SOURCE - SUBROUTINE h5rcreate_region_f(loc_id, name, space_id, ref, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset at location specified - ! by loc_id identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataset's dataspace identifier - TYPE(hdset_reg_ref_t_f), INTENT(OUT) :: ref ! Dataset region reference - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Name length - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RCREATE_REGION_C':: h5rcreate_region_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - INTEGER :: ref_f(REF_REG_BUF_LEN) - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5rcreate_region_c - END INTERFACE - - namelen = LEN(name) - ref_f = 0 - hdferr = h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id ) - ref%ref = ref_f - - END SUBROUTINE h5rcreate_region_f - -!****s* H5R (F03)/h5rcreate_ptr_f -! -! NAME -! h5rcreate_ptr_f -! -! PURPOSE -! Creates a reference. -! -! Inputs: -! loc_id - location identifier -! name - name of the dataset at the specified location -! ref_type - type of reference: -! H5R_OBJECT -! H5T_STD_REF_DSETREG -! Outputs: -! ref - reference created by the function call. -! hdferr - returns 0 if successful and -1 if fails. -! OPTIONAL -! space_id - dataspace identifier that describes selected region -! -! AUTHOR -! M. Scot Breitenfeld -! June 20, 2008 -! -! NOTES -! This is a module procedure for the h5rcreate_f -! subroutine where the output is a pointer. -! -! Signature: - SUBROUTINE h5rcreate_ptr_f(loc_id, name, ref_type, ref, hdferr, space_id) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset at location specified - ! by loc_id identifier - INTEGER, INTENT(IN) :: ref_type ! type of reference - TYPE(C_PTR), INTENT(INOUT) :: ref ! Reference created by the function call - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), INTENT(IN), OPTIONAL :: space_id ! Dataset's dataspace identifier -!***** - INTEGER :: namelen ! Name length - INTEGER(HID_T) :: space_id_c - - namelen = LEN(name) - space_id_c = -1 - IF(PRESENT(space_id)) space_id_c = space_id - hdferr = h5rcreate_ptr_c(ref, loc_id, name, namelen, ref_type, space_id_c) - - END SUBROUTINE h5rcreate_ptr_f -!****s* H5R (F03)/h5rdereference_object_f -! -! NAME -! h5rdereference_object_f -! -! PURPOSE -! Opens the HDF5 object referenced -! -! Inputs: -! dset_id - identifier of the dataset containing -! reference -! ref - reference to open -! Outputs: -! obj_id - object_identifier -! hdferr - returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rdereference_f subroutine. -! -! Signature: - SUBROUTINE h5rdereference_object_f(obj_id, ref, ref_obj_id, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Dataset identifier - TYPE(hobj_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference - INTEGER(HID_T), INTENT(OUT) :: ref_obj_id ! Object identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(ref) - hdferr = h5rdereference_ptr_c(obj_id, 0, f_ptr, ref_obj_id) - - END SUBROUTINE h5rdereference_object_f -!****s* H5R (F03)/h5rdereference_region_f -! -! NAME -! h5rdereference_region_f -! -! PURPOSE -! Opens the dataset region -! -! Inputs: -! dset_id - identifier of the dataset containing -! reference to teh regions -! ref - reference to open -! Outputs: -! obj_id - dataspace identifier -! hdferr - returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rdereference_f subroutine. -! -! Signature: - SUBROUTINE h5rdereference_region_f(obj_id, ref, ref_obj_id, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Dataset identifier - TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref ! Object reference - INTEGER(HID_T), INTENT(OUT) :: ref_obj_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(ref) - hdferr = h5rdereference_ptr_c(obj_id, 1, f_ptr, ref_obj_id) - - END SUBROUTINE h5rdereference_region_f - -!****s* H5R (F03)/h5rdereference_ptr_f -! -! NAME -! h5rdereference_ptr_f -! -! PURPOSE -! Opens the HDF5 object referenced. -! -! Inputs: -! obj_id - valid identifier for the file containing the -! referenced object or any object in that file. -! ref_type - the reference type of ref. -! ref - Reference to open. -! Outputs: -! ref_obj_id - identifier of referenced object -! hdferr - returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! June 20, 2008 -! -! NOTES -! This is a module procedure for the h5rdereference_f -! subroutine using pointers. -! -! Signature: - SUBROUTINE h5rdereference_ptr_f(obj_id, ref_type, ref, ref_obj_id, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Valid identifier for the file containing the - ! referenced object or any object in that file. - INTEGER, INTENT(IN) :: ref_type ! The reference type of ref. - TYPE(C_PTR), INTENT(IN) :: ref ! Object reference - INTEGER(HID_T), INTENT(OUT) :: ref_obj_id - ! Identifier of referenced object - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - hdferr = h5rdereference_ptr_c(obj_id, ref_type, ref, ref_obj_id) - - END SUBROUTINE h5rdereference_ptr_f -! -!****s* H5R (F03)/h5rget_name_object_f -! -! NAME -! h5rget_name_object_f -! -! PURPOSE -! Retrieves a name of a referenced object. -! -! Inputs: -! loc_id - Identifier for the file containing the reference or for any object in that file. -! ref - An object or dataset region reference. -! -! Outputs: -! name - A name associated with the referenced object or dataset region. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! size - The size of the name buffer, returning 0 (zero) if no name is associated -! with the identifier. -! -! AUTHOR -! M. Scot Breitenfeld -! March 28, 2008 -! -! Signature: - SUBROUTINE h5rget_name_object_f(loc_id, ref, name, hdferr, size) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - TYPE(hobj_ref_t_f), INTENT(IN), TARGET :: ref - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size - CHARACTER(LEN=*), INTENT(INOUT) :: name - INTEGER, INTENT(OUT) :: hdferr -!***** - - INTEGER(SIZE_T) :: size_default - INTEGER(SIZE_T) :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(ref) - - name_len=LEN(name) - - hdferr = h5rget_name_ptr_c(loc_id, 0, f_ptr, name, name_len, size_default) - - IF(PRESENT(size)) size = size_default - - END SUBROUTINE h5rget_name_object_f -!****s* H5R (F03)/h5rget_name_region_f -! -! NAME -! h5rget_name_region_f -! -! PURPOSE -! Retrieves a name of a dataset region. -! -! Inputs: -! loc_id - Identifier for the file containing the reference or for any object in that file. -! ref - An object or dataset region reference. -! -! Outputs: -! name - A name associated with the referenced object or dataset region. -! hdferr - Returns 0 if successful and -1 if fails. -! -! Optional parameters: -! size - The size of the name buffer, returning 0 (zero) if no name is associated with the identifier -! -! AUTHOR -! M. Scot Breitenfeld -! March 28, 2008 -! -! Signature: - SUBROUTINE h5rget_name_region_f(loc_id, ref, name, hdferr, size) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - TYPE(hdset_reg_ref_t_f), INTENT(IN), TARGET :: ref - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size - CHARACTER(LEN=*), INTENT(INOUT) :: name - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER(SIZE_T) :: size_default - INTEGER(SIZE_T) :: name_len - TYPE(C_PTR) :: f_ptr - - f_ptr = C_LOC(ref) - - name_len=LEN(name) - - hdferr = h5rget_name_ptr_c(loc_id, 1, f_ptr, name, name_len, size_default) - - IF(PRESENT(size)) size = size_default - - END SUBROUTINE h5rget_name_region_f - - !****s* H5R (F03)/h5rget_name_ptr_f - ! - ! NAME - ! h5rget_name_ptr_f - ! - ! PURPOSE - ! Retrieves a name of a referenced object. - ! - ! Inputs: - ! loc_id - Identifier for the file containing the reference or for any object in that file. - ! ref_type - Type of reference. - ! ref - An object or dataset region reference. - ! - ! Outputs: - ! name - A name associated with the referenced object or dataset ptr. - ! hdferr - Returns 0 if successful and -1 if fails. - ! - ! Optional parameters: - ! size - The size of the name buffer, returning 0 (zero) if no name is associated - ! with the identifier - ! - ! AUTHOR - ! M. Scot Breitenfeld - ! March 28, 2008 - ! - ! Signature: - SUBROUTINE h5rget_name_ptr_f(loc_id, ref_type, ref, name, hdferr, size) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER, INTENT(IN) :: ref_type - TYPE(C_PTR), INTENT(IN) :: ref - CHARACTER(LEN=*), INTENT(INOUT) :: name - INTEGER, INTENT(OUT) :: hdferr - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size -!***** - INTEGER(SIZE_T) :: size_default - INTEGER(SIZE_T) :: name_len - - name_len=LEN(name) - - hdferr = h5rget_name_ptr_c(loc_id, ref_type, ref, name, name_len, size_default) - - IF(PRESENT(size)) size = size_default - - END SUBROUTINE h5rget_name_ptr_f - - !****s* H5R (F03)/h5rget_obj_type_f - ! - ! NAME - ! h5rget_obj_type_f - ! - ! PURPOSE - ! Retrieves the type of object that an object reference points to. - ! - ! Inputs: - ! loc_id - Identifier for the dataset containing the reference or - ! for the group that dataset is in. - ! ref_type - Type of reference to query. - ! ref - Reference to query. - ! - ! Outputs: - ! obj_type - Type of referenced object. - ! H5G_UNKNOWN_F - ! H5G_GROUP_F - ! H5G_DATASET_F - ! H5G_TYPE_F - ! - ! hdferr - Returns 0 if successful and -1 if fails. - ! - ! AUTHOR - ! M. Scot Breitenfeld - ! Decemeber 17, 2008 - ! - ! Signature: - SUBROUTINE h5rget_obj_type_f(loc_id, ref_type, ref, obj_type, hdferr) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER, INTENT(IN) :: ref_type - TYPE(C_PTR), INTENT(IN) :: ref - INTEGER, INTENT(OUT) :: obj_type - INTEGER, INTENT(OUT) :: hdferr - !***** - - INTERFACE - INTEGER FUNCTION h5rget_obj_type_c(loc_id, ref_type, ref, obj_type) & - BIND(C, NAME='h5rget_obj_type_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER, INTENT(IN) :: ref_type - TYPE(C_PTR), VALUE :: ref - INTEGER :: obj_type - END FUNCTION h5rget_obj_type_c - END INTERFACE - - hdferr = h5rget_obj_type_c(loc_id, ref_type, ref, obj_type) - - END SUBROUTINE h5rget_obj_type_f - -END MODULE H5R_PROVISIONAL diff --git a/fortran/src/H5Rff_F90.f90 b/fortran/src/H5Rff_F90.f90 deleted file mode 100644 index ac45857..0000000 --- a/fortran/src/H5Rff_F90.f90 +++ /dev/null @@ -1,514 +0,0 @@ -!****h* ROBODoc/H5R (F90) -! -! NAME -! MODULE H5R_PROVISIONAL -! -! FILE -! fortran/src/H5Rff_F90.f90 -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5R functions. It contains -! the same functions as H5Rff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Rff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5R function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5R_PROVISIONAL - USE H5GLOBAL - -! If you change the value of these parameters, do not forget to change corresponding -! values in the H5f90.h file. -! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 -! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 -! -! TYPE hobj_ref_t_f -! INTEGER ref(REF_OBJ_BUF_LEN) -! END TYPE -! -! TYPE hdset_reg_ref_t_f -! INTEGER ref(REF_REG_BUF_LEN) -! END TYPE -! - INTERFACE h5rcreate_f - - MODULE PROCEDURE h5rcreate_object_f - MODULE PROCEDURE h5rcreate_region_f - - END INTERFACE - - INTERFACE h5rdereference_f - - MODULE PROCEDURE h5rdereference_object_f - MODULE PROCEDURE h5rdereference_region_f - - END INTERFACE - - INTERFACE h5rget_name_f - - MODULE PROCEDURE h5rget_name_object_f - MODULE PROCEDURE h5rget_name_region_f - - END INTERFACE - - INTERFACE h5rget_region_f - - MODULE PROCEDURE h5rget_region_region_f - - END INTERFACE - - -CONTAINS - - -!****s* H5R/h5rget_region_region_f -! -! NAME -! h5rget_region_region_f -! -! PURPOSE -! Retrieves a dataspace with the specified region selected -! -! INPUTS -! dset_id - identifier of the dataset containing -! reference to the regions -! ref - reference to open -! OUTPUTS -! space_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rget_region_f subroutine. -! -! SOURCE - SUBROUTINE h5rget_region_region_f(dset_id, ref, space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Dataset region reference - INTEGER(HID_T), INTENT(OUT) :: space_id ! Space identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rget_region_region_c(dset_id, ref_f, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RGET_REGION_REGION_C':: h5rget_region_region_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - INTEGER :: ref_f(REF_REG_BUF_LEN) - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5rget_region_region_c - END INTERFACE - - ref_f = ref%ref - hdferr = h5rget_region_region_c(dset_id, ref_f, space_id ) - - END SUBROUTINE h5rget_region_region_f - - - -!****s* H5R (F90)/h5rcreate_object_f -! -! NAME -! h5rcreate_object_f -! -! PURPOSE -! Creates reference to the object -! -! INPUTS -! loc_id - location identifier -! name - name of the object at the specified location -! OUTPUTS -! ref - reference to the specified object -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rcreate_f subroutine. -! -! SOURCE - SUBROUTINE h5rcreate_object_f(loc_id, name, ref, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the object at location specified - ! by loc_id identifier - TYPE(hobj_ref_t_f), INTENT(OUT) :: ref ! Object reference - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Name length - INTEGER(HADDR_T) :: ref_f ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rcreate_object_c(ref_f, loc_id, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RCREATE_OBJECT_C':: h5rcreate_object_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HADDR_T) :: ref_f - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - END FUNCTION h5rcreate_object_c - END INTERFACE - - namelen = LEN(name) - ref_f = 0 - hdferr = h5rcreate_object_c(ref_f, loc_id, name, namelen ) - ref%ref = ref_f - - END SUBROUTINE h5rcreate_object_f - -!****s* H5R (F90)/h5rcreate_region_f -! -! NAME -! h5rcreate_region_f -! -! PURPOSE -! Creates reference to the dataset region -! -! INPUTS -! loc_id - location identifier -! name - name of the dataset at the specified location -! space_id - dataspace identifier that describes selected region -! OUTPUTS -! ref - reference to the dataset region -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rcreate_f subroutine. -! -! SOURCE - SUBROUTINE h5rcreate_region_f(loc_id, name, space_id, ref, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Location identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of the dataset at location specified - ! by loc_id identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataset's dataspace identifier - TYPE(hdset_reg_ref_t_f), INTENT(OUT) :: ref ! Dataset region reference - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Name length - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RCREATE_REGION_C':: h5rcreate_region_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - ! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - INTEGER :: ref_f(REF_REG_BUF_LEN) - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5rcreate_region_c - END INTERFACE - - namelen = LEN(name) - ref_f = 0 - hdferr = h5rcreate_region_c(ref_f, loc_id, name, namelen, space_id ) - ref%ref = ref_f - - END SUBROUTINE h5rcreate_region_f -!****s* H5R (F90)/h5rdereference_object_f -! -! NAME -! h5rdereference_object_f -! -! PURPOSE -! Opens the HDF5 object referenced -! -! INPUTS -! dset_id - identifier of the dataset containing reference -! ref - reference to open -! OUTPUTS -! obj_id - object_identifier -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rdereference_f subroutine. -! -! SOURCE - SUBROUTINE h5rdereference_object_f(dset_id, ref, obj_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(hobj_ref_t_f), INTENT(IN) :: ref ! Object reference - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(HADDR_T) :: ref_f ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rdereference_object_c(dset_id, ref_f, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RDEREFERENCE_OBJECT_C':: h5rdereference_object_c - !DEC$ENDIF - ! INTEGER, PARAMETER :: REF_OBJ_BUF_LEN = 2 - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HADDR_T) :: ref_f - INTEGER(HID_T), INTENT(OUT) :: obj_id - END FUNCTION h5rdereference_object_c - END INTERFACE - - ref_f = ref%ref - hdferr = h5rdereference_object_c(dset_id, ref_f, obj_id ) - - END SUBROUTINE h5rdereference_object_f -!****s* H5R (F90)/h5rdereference_region_f -! -! NAME -! h5rdereference_region_f -! -! PURPOSE -! Opens the dataset region -! -! INPUTS -! dset_id - identifier of the dataset containing -! reference to teh regions -! ref - reference to open -! OUTPUTS -! obj_id - dataspace identifier -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! NOTES -! This is a module procedure for the h5rdereference_f subroutine. -! -! SOURCE - SUBROUTINE h5rdereference_region_f(dset_id, ref, obj_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref ! Object reference - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - - INTERFACE - INTEGER FUNCTION h5rdereference_region_c(dset_id, ref_f, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RDEREFERENCE_REGION_C':: h5rdereference_region_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id -! INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - INTEGER :: ref_f(REF_REG_BUF_LEN) - INTEGER(HID_T), INTENT(OUT) :: obj_id - END FUNCTION h5rdereference_region_c - END INTERFACE - - ref_f = ref%ref - hdferr = h5rdereference_region_c(dset_id, ref_f, obj_id ) - - END SUBROUTINE h5rdereference_region_f -!****s* H5R (F90)/h5rget_name_object_f -! -! NAME -! h5rget_name_object_f -! -! PURPOSE -! Retrieves a name of a referenced object. -! -! INPUTS -! loc_id - Identifier for the file containing the reference or for any object in that file. -! ref - An object or dataset region reference. -! -! OUTPUTS -! name - A name associated with the referenced object or dataset region. -! -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! OPTIONAL PARAMETERS -! size - The size of the name buffer, returning 0 (zero) if -! no name is associated with the identifier -! -! AUTHOR -! M. Scot Breitenfeld -! March 28, 2008 -! -! SOURCES - SUBROUTINE h5rget_name_object_f(loc_id, ref, name, hdferr, size) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! Identifier for the file containing the reference or - ! for any object in that file. - ! or for the group that dataset is in. - TYPE(hobj_ref_t_f), INTENT(IN) :: ref ! Object reference - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size ! The size of the name buffer, - ! returning 0 (zero) if no name is associated with the identifier - CHARACTER(LEN=*), INTENT(OUT) :: name ! A name associated with the referenced object or dataset region. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(HADDR_T) :: ref_f ! Local buffer to pass reference - - INTEGER(SIZE_T) :: size_default - INTEGER(SIZE_T) :: name_len - - INTERFACE - INTEGER FUNCTION h5rget_name_object_c(loc_id, ref_f, name, name_len, size_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RGET_NAME_OBJECT_C':: h5rget_name_object_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER(SIZE_T) :: size_default - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER(HADDR_T) :: ref_f - - INTEGER(SIZE_T) :: name_len - END FUNCTION h5rget_name_object_c - END INTERFACE - - name_len=LEN(name) - - ref_f = ref%ref - hdferr = h5rget_name_object_c(loc_id, ref_f, name, name_len, size_default) - - IF(PRESENT(size)) size = size_default - - END SUBROUTINE h5rget_name_object_f - -!****s* H5R (F90)/h5rget_name_region_f -! -! NAME -! h5rget_name_region_f -! -! PURPOSE -! Retrieves a name of a dataset region. -! -! INPUTS -! loc_id - Identifier for the file containing the reference or -! for any object in that file. -! ref - An object or dataset region reference. -! -! OUTPUTS -! name - A name associated with the referenced object or dataset region. -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! OPTIONAL PARAMETERS -! size - The size of the name buffer, returning 0 (zero) if no -! name is associated with the identifier -! -! AUTHOR -! M. Scot Breitenfeld -! March 28, 2008 -! -! SOURCE - SUBROUTINE h5rget_name_region_f(loc_id, ref, name, hdferr, size) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id - TYPE(hdset_reg_ref_t_f), INTENT(IN) :: ref - INTEGER(SIZE_T), OPTIONAL, INTENT(OUT) :: size - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER :: ref_f(REF_REG_BUF_LEN) ! Local buffer to pass reference - INTEGER(SIZE_T) :: size_default - INTEGER(SIZE_T) :: name_len - - INTERFACE - INTEGER FUNCTION h5rget_name_region_c(loc_id, ref_f, name, name_len, size_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5RGET_NAME_REGION_C':: h5rget_name_region_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER(SIZE_T) :: size_default - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER :: ref_f(REF_REG_BUF_LEN) - - INTEGER(SIZE_T) :: name_len - END FUNCTION h5rget_name_region_c - END INTERFACE - - name_len=LEN(name) - - ref_f = ref%ref - hdferr = h5rget_name_region_c(loc_id, ref_f, name, name_len, size_default) - - IF(PRESENT(size)) size = size_default - - END SUBROUTINE h5rget_name_region_f - -END MODULE H5R_PROVISIONAL diff --git a/fortran/src/H5Sf.c b/fortran/src/H5Sf.c index 6947d64..67427a7 100644 --- a/fortran/src/H5Sf.c +++ b/fortran/src/H5Sf.c @@ -1,6 +1,6 @@ /****h* H5Sf/H5Sf * PURPOSE - * This file contains C stubs for H5S Fortran APIs + * This file contains C stubs for H5S Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -26,27 +26,27 @@ /****if* H5Sf/h5screate_simple_c * NAME - * h5screate_simple_c + * h5screate_simple_c * PURPOSE - * Call H5Screate_simple to create a dataspace + * Call H5Screate_simple to create a dataspace * INPUTS - * rank - number of dimensions of dataspace - * dims - array of the size of each dimension + * rank - number of dimensions of dataspace + * dims - array of the size of each dimension maxdims - an array of the maximum size of each dimension * OUTPUTS - * space_id - identifier of the created dataspace + * space_id - identifier of the created dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 4, 1999 + * Wednesday, August 4, 1999 * HISTORY * * SOURCE */ int_f -nh5screate_simple_c ( int_f *rank, hsize_t_f *dims, hsize_t_f *maxdims, hid_t_f *space_id ) +h5screate_simple_c ( int_f *rank, hsize_t_f *dims, hsize_t_f *maxdims, hid_t_f *space_id ) /******/ { hsize_t c_dims[H5S_MAX_RANK]; @@ -75,23 +75,23 @@ done: /****if* H5Sf/h5sclose_c * NAME - * h5sclose_c + * h5sclose_c * PURPOSE - * Call H5Sclose to close the dataspace + * Call H5Sclose to close the dataspace * INPUTS - * space_id - identifier of the dataspace to be closed + * space_id - identifier of the dataspace to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 4, 1999 + * Wednesday, August 4, 1999 * HISTORY * * SOURCE */ int_f -nh5sclose_c ( hid_t_f *space_id ) +h5sclose_c ( hid_t_f *space_id ) /******/ { int ret_value = 0; @@ -104,25 +104,25 @@ nh5sclose_c ( hid_t_f *space_id ) /****if* H5Sf/h5screate_c * NAME - * h5screate_c + * h5screate_c * PURPOSE - * Call H5Screate to create a dataspace + * Call H5Screate to create a dataspace * INPUTS - * classtype - type of the dataspace class + * classtype - type of the dataspace class * OUTPUTS - * space_id - identifier of the created dataspace + * space_id - identifier of the created dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 10, 1999 + * Tuesday, August 10, 1999 * HISTORY * * SOURCE */ int_f -nh5screate_c ( int_f *classtype, hid_t_f *space_id ) +h5screate_c ( int_f *classtype, hid_t_f *space_id ) /******/ { H5S_class_t c_classtype; @@ -138,25 +138,25 @@ nh5screate_c ( int_f *classtype, hid_t_f *space_id ) /****if* H5Sf/h5scopy_c * NAME - * h5scopy_c + * h5scopy_c * PURPOSE - * Call H5Scopy to copy dataspace + * Call H5Scopy to copy dataspace * INPUTS - * space_id - identifier of the dataspace to be copied + * space_id - identifier of the dataspace to be copied * OUTPUTS - * new_space_id - identifier of the new datspace + * new_space_id - identifier of the new datspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 10, 1999 + * Tuesday, August 10, 1999 * HISTORY * * SOURCE */ int_f -nh5scopy_c( hid_t_f *space_id , hid_t_f *new_space_id) +h5scopy_c( hid_t_f *space_id , hid_t_f *new_space_id) /******/ { int ret_value = 0; @@ -173,28 +173,28 @@ nh5scopy_c( hid_t_f *space_id , hid_t_f *new_space_id) /****if* H5Sf/h5sget_select_hyper_nblocks_c * NAME - * h5sget_select_hyper_nblocks_c + * h5sget_select_hyper_nblocks_c * PURPOSE - * Call H5SH5Sget_select_hyper_nblocks to - * get the the number of hyperslab blocks in - * the current dataspace selection if successful + * Call H5SH5Sget_select_hyper_nblocks to + * get the the number of hyperslab blocks in + * the current dataspace selection if successful * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * num_blocks - number of hyperslab blocks in - * the current dataspace selection + * num_blocks - number of hyperslab blocks in + * the current dataspace selection * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, November 12, 1999 + * Friday, November 12, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_select_hyper_nblocks_c( hid_t_f *space_id , hssize_t_f * num_blocks) +h5sget_select_hyper_nblocks_c( hid_t_f *space_id , hssize_t_f * num_blocks) /******/ { int ret_value = 0; @@ -211,28 +211,28 @@ nh5sget_select_hyper_nblocks_c( hid_t_f *space_id , hssize_t_f * num_blocks) /****if* H5Sf/h5sget_select_elem_npoints_c * NAME - * h5sget_select_elem_npoints_c + * h5sget_select_elem_npoints_c * PURPOSE - * Call H5Sget_select_elem_npoints to - * get the the number of element points in - * the current dataspace selection if successful + * Call H5Sget_select_elem_npoints to + * get the the number of element points in + * the current dataspace selection if successful * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * num_points - number of element points in - * the current dataspace selection + * num_points - number of element points in + * the current dataspace selection * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Monday, November 15, 1999 + * Monday, November 15, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_select_elem_npoints_c( hid_t_f *space_id , hssize_t_f * num_points) +h5sget_select_elem_npoints_c( hid_t_f *space_id , hssize_t_f * num_points) /******/ { int ret_value = 0; @@ -249,36 +249,36 @@ nh5sget_select_elem_npoints_c( hid_t_f *space_id , hssize_t_f * num_points) /****if* H5Sf/h5sget_select_hyper_blocklist_c * NAME - * h5sget_select_hyper_blocklist_c + * h5sget_select_hyper_blocklist_c * PURPOSE - * Call H5Sget_select_hyper_blocklist to - * get a list of the hyperslab blocks currently selected - * Starting with the startblock-th block in the - * list of blocks, num_blocks blocks are put into the user's - * buffer. If the user's buffer fills up before numblocks - * blocks are inserted, the buffer - * will contain only as many blocks as fit. + * Call H5Sget_select_hyper_blocklist to + * get a list of the hyperslab blocks currently selected + * Starting with the startblock-th block in the + * list of blocks, num_blocks blocks are put into the user's + * buffer. If the user's buffer fills up before numblocks + * blocks are inserted, the buffer + * will contain only as many blocks as fit. * INPUTS - * space_id - identifier of the dataspace - * startblock - Hyperslab block to start with - * num_blocks - number of hyperslab blocks in - * the current dataspace selection + * space_id - identifier of the dataspace + * startblock - Hyperslab block to start with + * num_blocks - number of hyperslab blocks in + * the current dataspace selection * OUTPUTS - * buf - List of hyperslab blocks selected + * buf - List of hyperslab blocks selected * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Monday, November 15, 1999 + * Monday, November 15, 1999 * HISTORY * - * Transpose dimension arrays because of C-FORTRAN storage order - * M. Scot Breitenfeld + * Transpose dimension arrays because of C-FORTRAN storage order + * M. Scot Breitenfeld * SOURCE */ int_f -nh5sget_select_hyper_blocklist_c( hid_t_f *space_id ,hsize_t_f *startblock, +h5sget_select_hyper_blocklist_c( hid_t_f *space_id ,hsize_t_f *startblock, hsize_t_f *num_blocks, hsize_t_f *buf) /******/ { @@ -327,31 +327,31 @@ nh5sget_select_hyper_blocklist_c( hid_t_f *space_id ,hsize_t_f *startblock, /****if* H5Sf/h5sget_select_bounds_c * NAME - * h5sget_select_bounds_c + * h5sget_select_bounds_c * PURPOSE - * Call H5Sget_select_bounds to retrieve the coordinates - * of the bounding box containing the current selection - * and places them into user-supplied buffers + * Call H5Sget_select_bounds to retrieve the coordinates + * of the bounding box containing the current selection + * and places them into user-supplied buffers * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * start - Starting coordinates of the bounding box - * end - Ending coordinates of the bounding box, - * i.e., the coordinates of the diagonally opposite corne + * start - Starting coordinates of the bounding box + * end - Ending coordinates of the bounding box, + * i.e., the coordinates of the diagonally opposite corne * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, November 17, 1999 + * Wednesday, November 17, 1999 * HISTORY - * swapped array bounds to account for C and Fortran reversed - * matrix notation. - * M. Scot Breitenfeld + * swapped array bounds to account for C and Fortran reversed + * matrix notation. + * M. Scot Breitenfeld * SOURCE */ int_f -nh5sget_select_bounds_c( hid_t_f *space_id , hsize_t_f * start, hsize_t_f * end) +h5sget_select_bounds_c( hid_t_f *space_id , hsize_t_f * start, hsize_t_f * end) /******/ { hid_t c_space_id; @@ -379,34 +379,34 @@ done: /****if* H5Sf/h5sget_select_elem_pointlist_c * NAME - * h5sget_select_elem_pointlist_c + * h5sget_select_elem_pointlist_c * PURPOSE - * Call H5Sget_select_elem_pointlist - * get a list of element points in the - * current dataspace selectin. - * Starting with the startpoint-th point in the - * list of points, numpoints points are put into the user's - * buffer. If the user's buffer fills up before numpoints - * points are inserted, the buffer - * will contain only as many points as fit. + * Call H5Sget_select_elem_pointlist + * get a list of element points in the + * current dataspace selectin. + * Starting with the startpoint-th point in the + * list of points, numpoints points are put into the user's + * buffer. If the user's buffer fills up before numpoints + * points are inserted, the buffer + * will contain only as many points as fit. * INPUTS - * space_id - identifier of the dataspace - * startpoint - Element point to start with - * numpoints - Number of element points to get + * space_id - identifier of the dataspace + * startpoint - Element point to start with + * numpoints - Number of element points to get * OUTPUTS - * buf - List of element points selected + * buf - List of element points selected * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Wednesday, November 17, 1999 + * Wednesday, November 17, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_select_elem_pointlist_c( hid_t_f *space_id ,hsize_t_f * startpoint, +h5sget_select_elem_pointlist_c( hid_t_f *space_id ,hsize_t_f * startpoint, hsize_t_f * numpoints, hsize_t_f * buf) /******/ { @@ -451,23 +451,23 @@ nh5sget_select_elem_pointlist_c( hid_t_f *space_id ,hsize_t_f * startpoint, /****if* H5Sf/h5sselect_all_c * NAME - * h5sselect_all_c + * h5sselect_all_c * PURPOSE - * Call H5Sselect_all to select entire dataspace + * Call H5Sselect_all to select entire dataspace * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 10, 1999 + * Tuesday, August 10, 1999 * HISTORY * * SOURCE */ int_f -nh5sselect_all_c ( hid_t_f *space_id ) +h5sselect_all_c ( hid_t_f *space_id ) /******/ { int ret_value = 0; @@ -480,23 +480,23 @@ nh5sselect_all_c ( hid_t_f *space_id ) /****if* H5Sf/h5sselect_none_c * NAME - * h5sselect_none_c + * h5sselect_none_c * PURPOSE - * Call H5Sselect_none to reset the selection region + * Call H5Sselect_none to reset the selection region * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 10, 1999 + * Tuesday, August 10, 1999 * HISTORY * * SOURCE */ int_f -nh5sselect_none_c ( hid_t_f *space_id ) +h5sselect_none_c ( hid_t_f *space_id ) /******/ { int ret_value = 0; @@ -509,27 +509,27 @@ nh5sselect_none_c ( hid_t_f *space_id ) /****if* H5Sf/h5sselect_valid_c * NAME - * h5sselect_valid_c + * h5sselect_valid_c * PURPOSE - * Call H5Sselect_valid to verify that selection - * is within dataspace extent. + * Call H5Sselect_valid to verify that selection + * is within dataspace extent. * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * flag - 0 if not valid selection, 1 if is valid selection, - * and negative on failure. + * flag - 0 if not valid selection, 1 if is valid selection, + * and negative on failure. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, August 10, 1999 + * Tuesday, August 10, 1999 * HISTORY * * SOURCE */ int_f -nh5sselect_valid_c ( hid_t_f *space_id , int_f *flag ) +h5sselect_valid_c ( hid_t_f *space_id , int_f *flag ) /******/ { int ret_value = 0; @@ -545,26 +545,26 @@ nh5sselect_valid_c ( hid_t_f *space_id , int_f *flag ) /****if* H5Sf/h5sget_simple_extent_npoints_c * NAME - * h5sget_simple_extent_npoints_c + * h5sget_simple_extent_npoints_c * PURPOSE - * Call H5Sget_simple_extent_npoints to determine the number - * of elements in a dataspace + * Call H5Sget_simple_extent_npoints to determine the number + * of elements in a dataspace * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * npoints - number of points in a dataspace + * npoints - number of points in a dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_simple_extent_npoints_c ( hid_t_f *space_id , hsize_t_f *npoints ) +h5sget_simple_extent_npoints_c ( hid_t_f *space_id , hsize_t_f *npoints ) /******/ { int ret_value = 0; @@ -580,26 +580,26 @@ nh5sget_simple_extent_npoints_c ( hid_t_f *space_id , hsize_t_f *npoints ) /****if* H5Sf/h5sget_select_npoints_c * NAME - * h5sget_select_npoints_c + * h5sget_select_npoints_c * PURPOSE - * Call H5Sget_select_npoints to determine the number - * of elements in a dataspace selection + * Call H5Sget_select_npoints to determine the number + * of elements in a dataspace selection * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * npoints - number of points in a dataspace selection + * npoints - number of points in a dataspace selection * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_select_npoints_c ( hid_t_f *space_id , hssize_t_f *npoints ) +h5sget_select_npoints_c ( hid_t_f *space_id , hssize_t_f *npoints ) /******/ { int ret_value = 0; @@ -615,26 +615,26 @@ nh5sget_select_npoints_c ( hid_t_f *space_id , hssize_t_f *npoints ) /****if* H5Sf/h5sget_simple_extent_ndims_c * NAME - * h5sget_simple_extent_ndims_c + * h5sget_simple_extent_ndims_c * PURPOSE - * Call H5Sget_simple_extent_ndims to determine the number - * dimensions + * Call H5Sget_simple_extent_ndims to determine the number + * dimensions * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * rank - number of dataspace dimensions + * rank - number of dataspace dimensions * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_simple_extent_ndims_c ( hid_t_f *space_id , int_f *ndims ) +h5sget_simple_extent_ndims_c ( hid_t_f *space_id , int_f *ndims ) /******/ { int ret_value = 0; @@ -650,27 +650,27 @@ nh5sget_simple_extent_ndims_c ( hid_t_f *space_id , int_f *ndims ) /****if* H5Sf/h5sget_simple_extent_type_c * NAME - * h5sget_simple_extent_type_c + * h5sget_simple_extent_type_c * PURPOSE - * Call H5Sget_simple_extent_type to determine the class type - * of a dataspace + * Call H5Sget_simple_extent_type to determine the class type + * of a dataspace * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * classtype - class type; possible values are: + * classtype - class type; possible values are: * H5S_SCALAR_F (0), H5S_SIMPLE_F (1), H5S_NULL_F (2) * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_simple_extent_type_c ( hid_t_f *space_id , int_f *classtype) +h5sget_simple_extent_type_c ( hid_t_f *space_id , int_f *classtype) /******/ { int ret_value = 0; @@ -691,25 +691,25 @@ nh5sget_simple_extent_type_c ( hid_t_f *space_id , int_f *classtype) /****if* H5Sf/h5soffset_simple_c * NAME - * h5soffset_simple_c + * h5soffset_simple_c * PURPOSE - * Call H5Soffset_simple to set the offset of a simple - * dataspace + * Call H5Soffset_simple to set the offset of a simple + * dataspace * INPUTS - * space_id - identifier of the dataspace - * offset - offset array + * space_id - identifier of the dataspace + * offset - offset array * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5soffset_simple_c ( hid_t_f *space_id , hssize_t_f *offset) +h5soffset_simple_c ( hid_t_f *space_id , hssize_t_f *offset) /******/ { hid_t c_space_id; @@ -738,27 +738,27 @@ done: /****if* H5Sf/h5sset_extent_simple_c * NAME - * h5sset_extent_simple_c + * h5sset_extent_simple_c * PURPOSE - * Call H5Sset_extent_simple to set or reset size of - * existing dataspace + * Call H5Sset_extent_simple to set or reset size of + * existing dataspace * INPUTS - * space_id - identifier of the dataspace - * rank - dataspace rank - * current_size - array with the new dimension sizes - * maximum_size - aray with maximum sizes of dimensions + * space_id - identifier of the dataspace + * rank - dataspace rank + * current_size - array with the new dimension sizes + * maximum_size - aray with maximum sizes of dimensions * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sset_extent_simple_c ( hid_t_f *space_id , int_f *rank, hsize_t_f *current_size, hsize_t_f *maximum_size) +h5sset_extent_simple_c ( hid_t_f *space_id , int_f *rank, hsize_t_f *current_size, hsize_t_f *maximum_size) /******/ { hsize_t c_current_size[H5S_MAX_RANK]; @@ -784,27 +784,27 @@ done: /****if* H5Sf/h5sget_simple_extent_dims_c * NAME - * h5sget_simple_extent_dims_c + * h5sget_simple_extent_dims_c * PURPOSE - * Call H5Sget_simple_extent_dims to retrieve sizes of an - * existing dataspace + * Call H5Sget_simple_extent_dims to retrieve sizes of an + * existing dataspace * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * dims - array with the dimension sizes - * maxdims - aray with maximum sizes of dimensions + * dims - array with the dimension sizes + * maxdims - aray with maximum sizes of dimensions * RETURNS - * number of dataspace dimensions (rank) on success, -1 on failure + * number of dataspace dimensions (rank) on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sget_simple_extent_dims_c ( hid_t_f *space_id , hsize_t_f *dims, hsize_t_f *maxdims) +h5sget_simple_extent_dims_c ( hid_t_f *space_id , hsize_t_f *dims, hsize_t_f *maxdims) /******/ { hid_t c_space_id; @@ -838,27 +838,27 @@ done: /****if* H5Sf/h5sis_simple_c * NAME - * h5sis_simple_c + * h5sis_simple_c * PURPOSE - * Call H5Sis_simple to detrmine if the dataspace - * is simple. + * Call H5Sis_simple to detrmine if the dataspace + * is simple. * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * flag - 0 if not simple, 1 if is simple, - * and negative on failure. + * flag - 0 if not simple, 1 if is simple, + * and negative on failure. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sis_simple_c ( hid_t_f *space_id , int_f *flag ) +h5sis_simple_c ( hid_t_f *space_id , int_f *flag ) /******/ { int ret_value = 0; @@ -875,24 +875,24 @@ nh5sis_simple_c ( hid_t_f *space_id , int_f *flag ) /****if* H5Sf/h5sextent_copy_c * NAME - * h5sextent_copy_c + * h5sextent_copy_c * PURPOSE - * Call H5Sextent_copy to copy an extent of dataspace + * Call H5Sextent_copy to copy an extent of dataspace * INPUTS - * dest_space_id - identifier of the destination dataspace - * source_space_id - identifier of the source dataspace + * dest_space_id - identifier of the destination dataspace + * source_space_id - identifier of the source dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sextent_copy_c ( hid_t_f *dest_space_id , hid_t_f *source_space_id) +h5sextent_copy_c ( hid_t_f *dest_space_id , hid_t_f *source_space_id) /******/ { int ret_value = 0; @@ -908,23 +908,23 @@ nh5sextent_copy_c ( hid_t_f *dest_space_id , hid_t_f *source_space_id) /****if* H5Sf/h5sset_extent_none_c * NAME - * h5sset_extent_none_c + * h5sset_extent_none_c * PURPOSE - * Call H5Sset_extent_none to remove extent from a dataspace + * Call H5Sset_extent_none to remove extent from a dataspace * INPUTS - * space_id - dataspace identifier + * space_id - dataspace identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sset_extent_none_c ( hid_t_f *space_id ) +h5sset_extent_none_c ( hid_t_f *space_id ) /******/ { int ret_value = 0; @@ -939,30 +939,30 @@ nh5sset_extent_none_c ( hid_t_f *space_id ) /****if* H5Sf/h5sselect_hyperslab_c * NAME - * h5sselect_hyperslab_c + * h5sselect_hyperslab_c * PURPOSE - * Call H5Sselect_hyperslab to select a hyperslab + * Call H5Sselect_hyperslab to select a hyperslab * INPUTS - * space_id - identifier of the dataspace - * operator - defines how the new selection is combined - * with the previous one; current values are + * space_id - identifier of the dataspace + * operator - defines how the new selection is combined + * with the previous one; current values are * H5S_SELECT_SET_F (0) and H5S_SELECT_OR_F (1) - * start - offset of start of hyperslab - * count - number of blocks included in the hyperslab - * stride - hyperslab stride (interval between blocks) - * block - size of block in the hyperslab + * start - offset of start of hyperslab + * count - number of blocks included in the hyperslab + * stride - hyperslab stride (interval between blocks) + * block - size of block in the hyperslab * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sselect_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block) +h5sselect_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block) /******/ { hsize_t c_start[H5S_MAX_RANK]; @@ -1000,30 +1000,30 @@ done: #ifdef NEW_HYPERSLAB_API /****if* H5Sf/h5scombine_hyperslab_c * NAME - * h5scombine_hyperslab_c + * h5scombine_hyperslab_c * PURPOSE - * Call H5Scombine_hyperslab + * Call H5Scombine_hyperslab * INPUTS - * space_id - identifier of the dataspace - * operator - defines how the new selection is combined - * start - offset of start of hyperslab - * count - number of blocks included in the hyperslab - * stride - hyperslab stride (interval between blocks) - * block - size of block in the hyperslab + * space_id - identifier of the dataspace + * operator - defines how the new selection is combined + * start - offset of start of hyperslab + * count - number of blocks included in the hyperslab + * stride - hyperslab stride (interval between blocks) + * block - size of block in the hyperslab * OUTPUTS - * hyper_id - identifier for the new dataspace + * hyper_id - identifier for the new dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5scombine_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block, hid_t_f *hyper_id) +h5scombine_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block, hid_t_f *hyper_id) /******/ { int ret_value = -1; @@ -1082,27 +1082,27 @@ DONE: } /****if* H5Sf/h5scombine_select_c * NAME - * h5scombine_select_c + * h5scombine_select_c * PURPOSE - * Call H5Scombine_ select + * Call H5Scombine_ select * INPUTS - * space1_id - identifier of the first dataspace - * operator - defines how the new selection is combined - * space2_id - identifier of the second dataspace + * space1_id - identifier of the first dataspace + * operator - defines how the new selection is combined + * space2_id - identifier of the second dataspace * OUTPUTS - * ds_id - identifier for the new dataspace + * ds_id - identifier for the new dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5scombine_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id, hid_t_f *ds_id) +h5scombine_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id, hid_t_f *ds_id) /******/ { int ret_value = -1; @@ -1123,25 +1123,25 @@ nh5scombine_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id, hid_t } /****if* H5Sf/h5sselect_select_c * NAME - * h5sselect_select_c + * h5sselect_select_c * PURPOSE - * Call H5Sselect_ select + * Call H5Sselect_ select * INPUTS - * space1_id - identifier of the first dataspace to modify - * operator - defines how the new selection is combined - * space2_id - identifier of the second dataspace + * space1_id - identifier of the first dataspace to modify + * operator - defines how the new selection is combined + * space2_id - identifier of the second dataspace * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5sselect_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id) +h5sselect_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id) /******/ { int ret_value = -1; @@ -1160,24 +1160,24 @@ nh5sselect_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id) #endif /*NEW_HYPERSLAB_API*/ /****if* H5Sf/h5sget_select_type_c * NAME - * h5sget_select_type_c + * h5sget_select_type_c * PURPOSE - * Call H5Sget_select_type + * Call H5Sget_select_type * INPUTS - * space_id - identifier of the dataspace + * space_id - identifier of the dataspace * OUTPUTS - * type - type of selection + * type - type of selection * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Monday, October 7, 2002 + * Monday, October 7, 2002 * HISTORY * * SOURCE */ int_f -nh5sget_select_type_c ( hid_t_f *space_id , int_f *type) +h5sget_select_type_c ( hid_t_f *space_id , int_f *type) /******/ { int ret_value = -1; @@ -1195,28 +1195,28 @@ nh5sget_select_type_c ( hid_t_f *space_id , int_f *type) /****if* H5Sf/h5sselect_elements_c * NAME - * h5sselect_elements_c + * h5sselect_elements_c * PURPOSE - * Call H5Sselect_elements to select elements of a dataspace + * Call H5Sselect_elements to select elements of a dataspace * INPUTS - * space_id - identifier of the dataspace - * operator - defines how the new selection is combined - * with the previous one; current values are + * space_id - identifier of the dataspace + * operator - defines how the new selection is combined + * with the previous one; current values are * H5S_SELECT_SET_F (0) - * nelements - number of elements in the selection - * coord - arrays with the elements coordinates + * nelements - number of elements in the selection + * coord - arrays with the elements coordinates * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, August 11, 1999 + * Wednesday, August 11, 1999 * HISTORY * * SOURCE */ int_f -nh5sselect_elements_c ( hid_t_f *space_id , int_f *op, size_t_f *nelements, hsize_t_f *coord) +h5sselect_elements_c ( hid_t_f *space_id , int_f *op, size_t_f *nelements, hsize_t_f *coord) /******/ { int ret_value = -1; @@ -1251,28 +1251,28 @@ nh5sselect_elements_c ( hid_t_f *space_id , int_f *op, size_t_f *nelements, hsi /****if* H5Sf/h5sdecode_c * NAME - * h5sdecode_c + * h5sdecode_c * PURPOSE - * Call H5Sdecode + * Call H5Sdecode * INPUTS * * buf - Buffer for the data space object to be decoded. * OUTPUTS * - * obj_id - Object_id (non-negative) + * obj_id - Object_id (non-negative) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 26, 2008 + * March 26, 2008 * HISTORY * * SOURCE */ int_f -nh5sdecode_c ( _fcd buf, hid_t_f *obj_id ) +h5sdecode_c ( _fcd buf, hid_t_f *obj_id ) /******/ { int ret_value = -1; @@ -1297,26 +1297,26 @@ nh5sdecode_c ( _fcd buf, hid_t_f *obj_id ) /****if* H5Sf/h5sencode_c * NAME - * h5sencode_c + * h5sencode_c * PURPOSE - * Call H5Sencode + * Call H5Sencode * INPUTS * - * obj_id - Identifier of the object to be encoded. + * obj_id - Identifier of the object to be encoded. * buf - Buffer for the object to be encoded into. - * nalloc - The size of the allocated buffer. + * nalloc - The size of the allocated buffer. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * March 26, 2008 + * March 26, 2008 * HISTORY * * SOURCE */ int_f -nh5sencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) +h5sencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) /******/ { int ret_value = -1; @@ -1366,28 +1366,28 @@ nh5sencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) /****if* H5Sf/h5sextent_equal_c * NAME - * h5sextent_equal_c + * h5sextent_equal_c * PURPOSE - * Call H5Sextent_equal + * Call H5Sextent_equal * INPUTS * * space1_id - First dataspace identifier. - * space2_id - Second dataspace identifier. + * space2_id - Second dataspace identifier. * OUTPUTS * - * equal - TRUE if equal, FALSE if unequal. + * equal - TRUE if equal, FALSE if unequal. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld - * April 4, 2008 + * April 4, 2008 * HISTORY * * SOURCE */ int_f -nh5sextent_equal_c ( hid_t_f * space1_id, hid_t_f *space2_id, hid_t_f *c_equal) +h5sextent_equal_c ( hid_t_f * space1_id, hid_t_f *space2_id, hid_t_f *c_equal) /******/ { int ret_value = -1; diff --git a/fortran/src/H5Sff.F90 b/fortran/src/H5Sff.F90 new file mode 100644 index 0000000..aeb3314 --- /dev/null +++ b/fortran/src/H5Sff.F90 @@ -0,0 +1,1754 @@ +!****h* ROBODoc/H5S +! +! NAME +! MODULE H5S +! +! FILE +! fortran/src/H5Sff.f90 +! +! PURPOSE +! This file contains Fortran interfaces for H5S functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5S function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5S + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR + USE H5GLOBAL + +CONTAINS +! +!****s* H5S/h5screate_simple_f +! +! NAME +! h5screate_simple_f +! +! PURPOSE +! Creates a new simple data space and opens it for access . +! +! INPUTS +! rank - number of dimensions +! dims - an array of the size of each dimension +! OUTPUTS +! space_id - dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! maxdims - an array of the maximum size of each dimension +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! SOURCE + SUBROUTINE h5screate_simple_f(rank, dims, space_id, hdferr, maxdims) + + IMPLICIT NONE + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), INTENT(IN) :: dims(rank) + INTEGER(HID_T), INTENT(OUT) :: space_id + INTEGER, INTENT(OUT) :: hdferr + INTEGER(HSIZE_T), OPTIONAL, INTENT(IN) :: maxdims(rank) +!***** + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: f_maxdims + + INTERFACE + INTEGER FUNCTION h5screate_simple_c(rank, dims, maxdims, space_id) BIND(C,NAME='h5screate_simple_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), INTENT(IN) :: dims(rank) + INTEGER(HSIZE_T), DIMENSION(:),INTENT(IN) :: maxdims(rank) + INTEGER(HID_T), INTENT(OUT) :: space_id + END FUNCTION h5screate_simple_c + END INTERFACE + + ALLOCATE (f_maxdims(rank), stat=hdferr) + IF (hdferr .NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + IF (PRESENT(maxdims)) THEN + f_maxdims = maxdims + ELSE + f_maxdims = dims + ENDIF + hdferr = h5screate_simple_c(rank, dims, f_maxdims, space_id) + DEALLOCATE(f_maxdims) + + END SUBROUTINE h5screate_simple_f + +! +!****s* H5S/h5sclose_f +! +! NAME +! h5sclose_f +! +! PURPOSE +! Releases and terminates access to a dataspace. +! +! INPUTS +! space_id - identifier of dataspace to release +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sclose_f(space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5sclose_c(space_id) BIND(C,NAME='h5sclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5sclose_c + END INTERFACE + + hdferr = h5sclose_c(space_id) + + END SUBROUTINE h5sclose_f + +! +!****s* H5S/h5screate_f +! +! NAME +! h5screate_f +! +! PURPOSE +! Creates a new dataspace of a specified type. +! +! INPUTS +! classtype - The type of the dataspace to be created +! Possible values are: +! H5S_SCALAR_F +! H5S_SIMPLE_F +! H5S_NULL_F +! OUTPUTS +! space_id - Dataspace identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! NOTES +! + +! SOURCE + SUBROUTINE h5screate_f(classtype, space_id, hdferr) + IMPLICIT NONE + INTEGER, INTENT(IN) :: classtype + INTEGER(HID_T), INTENT(OUT) :: space_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5screate_c(classtype, space_id) BIND(C,NAME='h5screate_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER, INTENT(IN) :: classtype + INTEGER(HID_T), INTENT(OUT) :: space_id + END FUNCTION h5screate_c + END INTERFACE + + hdferr = h5screate_c(classtype, space_id) + + END SUBROUTINE h5screate_f + +! +!****s* H5S/h5scopy_f +! +! NAME +! h5scopy_f +! +! PURPOSE +! Creates an exact copy of a dataspace. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! new_space_id - identifier of dataspace's copy +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! NOTES +! + +! SOURCE + SUBROUTINE h5scopy_f(space_id, new_space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(OUT) :: new_space_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5scopy_c(space_id, new_space_id) BIND(C,NAME='h5scopy_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HID_T), INTENT(OUT):: new_space_id + END FUNCTION h5scopy_c + END INTERFACE + + hdferr = h5scopy_c(space_id, new_space_id) + + END SUBROUTINE h5scopy_f + +! +!****s* H5S/h5sget_select_hyper_nblocks_f +! +! NAME +! h5sget_select_hyper_nblocks_f +! +! PURPOSE +! Get number of hyperslab blocks. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! num_blocks - number of hyperslab blocks in the current +! hyperslab selection +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_select_hyper_nblocks_f(space_id, num_blocks, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: num_blocks + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_hyper_nblocks_c (space_id, num_blocks) & + BIND(C,NAME='h5sget_select_hyper_nblocks_c') + IMPORT :: HID_T, HSSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: num_blocks + END FUNCTION h5sget_select_hyper_nblocks_c + END INTERFACE + + hdferr = h5sget_select_hyper_nblocks_c (space_id, num_blocks) + + END SUBROUTINE h5sget_select_hyper_nblocks_f + +! +!****s* H5S/h5sget_select_hyper_blocklist_f +! +! NAME +! h5sget_select_hyper_blocklist_f +! +! PURPOSE +! Gets the list of hyperslab blocks currently selected. +! +! INPUTS +! space_id - dataspace identifier +! startblock - hyperslab block to start with +! num_blocks - number of blocks to get +! OUTPUTS +! buf - buffer to hold block list +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! SOURCE + SUBROUTINE h5sget_select_hyper_blocklist_f(space_id, startblock, & + num_blocks, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(IN) :: startblock + INTEGER(HSIZE_T), INTENT(IN) :: num_blocks + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_hyper_blocklist_c(space_id, startblock, & + num_blocks, buf ) BIND(C,NAME='h5sget_select_hyper_blocklist_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(IN) :: startblock + INTEGER(HSIZE_T), INTENT(IN) :: num_blocks + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf + END FUNCTION h5sget_select_hyper_blocklist_c + END INTERFACE + + hdferr = h5sget_select_hyper_blocklist_c(space_id, startblock, num_blocks, buf ) + + END SUBROUTINE h5sget_select_hyper_blocklist_f + +! +!****s* H5S/h5sget_select_bounds_f +! +! NAME +! h5sget_select_bounds_f +! +! PURPOSE +! Gets the bounding box containing the current selection. +! +! INPUTS +! space_id - dataspace identifier +! +! OUTPUTS +! start - starting coordinates of bounding box +! end - ending coordinates of bounding box +! i.e., the coordinates of the diagonally opposite corner +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! SOURCE + SUBROUTINE h5sget_select_bounds_f(space_id, start, END, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: start + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: END + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_bounds_c(space_id, start, end) & + BIND(C,NAME='h5sget_select_bounds_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: start + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: END + END FUNCTION h5sget_select_bounds_c + END INTERFACE + + hdferr = h5sget_select_bounds_c(space_id, start, END) + + END SUBROUTINE h5sget_select_bounds_f + +! +!****s* H5S/h5sget_select_elem_npoints_f +! +! NAME +! h5sget_select_elem_npoints_f +! +! PURPOSE +! Gets the number of element points in the current selection +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! num_points - number of element points in the current +! dataspace selection +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_select_elem_npoints_f(space_id, num_points, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: num_points + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_elem_npoints_c (space_id, num_points) BIND(C,NAME='h5sget_select_elem_npoints_c') + IMPORT :: HID_T, HSSIZE_T + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: num_points + END FUNCTION h5sget_select_elem_npoints_c + END INTERFACE + + hdferr = h5sget_select_elem_npoints_c (space_id, num_points) + + END SUBROUTINE h5sget_select_elem_npoints_f + +! +!****s* H5S/h5sget_select_elem_pointlist_f +! +! NAME +! h5sget_select_elem_pointlist_f +! +! PURPOSE +! Gets the list of element points currently selected. +! +! INPUTS +! space_id - dataspace identifier +! startpoint - element point to start with +! num_points - number of elemnt points to get +! OUTPUTS +! buf - buffer with element points selected +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_select_elem_pointlist_f(space_id, startpoint, & + num_points, buf, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(IN) :: startpoint + INTEGER(HSIZE_T), INTENT(IN) :: num_points + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_elem_pointlist_c(space_id, startpoint, & + num_points, buf ) BIND(C,NAME='h5sget_select_elem_pointlist_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(IN) :: startpoint + INTEGER(HSIZE_T), INTENT(IN) :: num_points + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf + END FUNCTION h5sget_select_elem_pointlist_c + END INTERFACE + + hdferr = h5sget_select_elem_pointlist_c(space_id, startpoint, & + num_points, buf ) + + END SUBROUTINE h5sget_select_elem_pointlist_f + +! +!****s* H5S/h5sselect_elements_f +! +! NAME +! h5sselect_elements_f +! +! PURPOSE +! Selects elements to be included in the selection for +! a dataspace +! +! INPUTS +! space_id - dataspace identifier +! operator - flag, valid values are: +! H5S_SELECT_SET_F +! H5S_SELECT_APPEND_F +! H5S_SELECT_PREPEND_F +! rank - number of dataspace dimensions +! num_elements - number of elements to be selected +! coord - 2D (rank x num_elements) array with the +! elements coordinates ( 1-based); in C the +! array is stored in 2D as (num_element x rank) +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! SOURCE + SUBROUTINE h5sselect_elements_f(space_id, OPERATOR, rank, & + num_elements, coord, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: OPERATOR + INTEGER, INTENT(IN) :: rank + INTEGER(SIZE_T), INTENT(IN) :: num_elements + INTEGER(HSIZE_T), INTENT(IN) , DIMENSION(rank,num_elements) :: coord + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:,:) :: c_coord + INTEGER :: error, i + + INTERFACE + INTEGER FUNCTION h5sselect_elements_c(space_id, OPERATOR,& + num_elements,c_c_coord) BIND(C,NAME='h5sselect_elements_c') + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: OPERATOR + INTEGER(SIZE_T), INTENT(IN) :: num_elements + INTEGER(HSIZE_T),DIMENSION(*) :: c_c_coord + END FUNCTION h5sselect_elements_c + END INTERFACE + + ALLOCATE(c_coord(rank,num_elements), STAT = error) + IF (error.NE. 0) THEN + hdferr = -1 + RETURN + ENDIF + DO i = 1, rank + c_coord(i,:) = coord(rank-i+1, :) - 1 + ENDDO + hdferr = h5sselect_elements_c(space_id, OPERATOR, num_elements, c_coord) + +! ALLOCATE(c_coord(num_elements,rank), stat = error) +! IF (error.NE. 0) THEN +! hdferr = -1 +! RETURN +! ENDIF +! +! c_coord = TRANSPOSE(coord) +! hdferr = h5sselect_elements_c(space_id, OPERATOR, INT(rank,size_t), c_coord) + + + DEALLOCATE(c_coord) + + END SUBROUTINE h5sselect_elements_f + +! +!****s* H5S/h5sselect_all_f +! +! NAME +! h5sselect_all_f +! +! PURPOSE +! Selects the entire dataspace. +! +! INPUTS +! space_id - Identifier for the dataspace in which +! selection being made +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sselect_all_f(space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sselect_all_c(space_id) BIND(C,NAME='h5sselect_all_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5sselect_all_c + END INTERFACE + + hdferr = h5sselect_all_c(space_id) + + END SUBROUTINE h5sselect_all_f + +! +!****s* H5S/h5sselect_none_f +! +! NAME +! h5sselect_none_f +! +! PURPOSE +! Resets the selection region to include no elements. +! +! INPUTS +! space_id - the identifier for the dataspace in which +! the selection is being reset. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sselect_none_f(space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sselect_none_c(space_id) BIND(C,NAME='h5sselect_none_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5sselect_none_c + END INTERFACE + + hdferr = h5sselect_none_c(space_id) + + END SUBROUTINE h5sselect_none_f + +! +!****s* H5S/h5sselect_valid_f +! +! NAME +! h5sselect_valid_f +! +! PURPOSE +! Verifies that the selection is within the extent of +! the dataspace. +! +! INPUTS +! space_id - identifier for the dataspace for which +! selection is verified +! OUTPUTS +! status - TRUE if the selection is contained within +! the extent, FALSE otherwise. +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sselect_valid_f(space_id, status, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + LOGICAL, INTENT(OUT) :: status + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: flag ! "TRUE/FALSE/ERROR" flag from C routine + + INTERFACE + INTEGER FUNCTION h5sselect_valid_c(space_id, flag) BIND(C,NAME='h5sselect_valid_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER :: flag + END FUNCTION h5sselect_valid_c + END INTERFACE + + hdferr = h5sselect_valid_c(space_id, flag) + status = .TRUE. + IF (flag .EQ. 0) status = .FALSE. + + END SUBROUTINE h5sselect_valid_f + +! +!****s* H5S/h5sget_simple_extent_npoints_f +! +! NAME +! h5sget_simple_extent_npoints_f +! +! PURPOSE +! Determines the number of elements in a dataspace. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! npoints - number of elements in the dataspace +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_simple_extent_npoints_f(space_id, npoints, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(OUT) :: npoints + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_simple_extent_npoints_c( space_id, npoints) BIND(C,NAME='h5sget_simple_extent_npoints_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), INTENT(OUT) :: npoints + END FUNCTION h5sget_simple_extent_npoints_c + END INTERFACE + + hdferr = h5sget_simple_extent_npoints_c( space_id, npoints) + + END SUBROUTINE h5sget_simple_extent_npoints_f + +! +!****s* H5S/h5sget_select_npoints_f +! +! NAME +! h5sget_select_npoints_f +! +! PURPOSE +! Determines the number of elements in a dataspace selection. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! npoints - number of points in the dataspace selection +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! SOURCE + SUBROUTINE h5sget_select_npoints_f(space_id, npoints, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: npoints + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_npoints_c(space_id, npoints) BIND(C,NAME='h5sget_select_npoints_c') + IMPORT :: HID_T, HSSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), INTENT(OUT) :: npoints + END FUNCTION h5sget_select_npoints_c + END INTERFACE + + hdferr = h5sget_select_npoints_c(space_id, npoints) + + END SUBROUTINE h5sget_select_npoints_f + +! +!****s* H5S/h5sget_simple_extent_ndims_f +! +! NAME +! h5sget_simple_extent_ndims_f +! +! PURPOSE +! Determines the dimensionality of a dataspace +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! rank - number of dataspace dimensions +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_simple_extent_ndims_f(space_id, rank, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: rank + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_simple_extent_ndims_c(space_id, rank) BIND(C,NAME='h5sget_simple_extent_ndims_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: rank + END FUNCTION h5sget_simple_extent_ndims_c + END INTERFACE + + hdferr = h5sget_simple_extent_ndims_c(space_id, rank) + + END SUBROUTINE h5sget_simple_extent_ndims_f +! +!****s* H5S/h5sget_simple_extent_dims_f +! +! NAME +! h5sget_simple_extent_dims_f +! +! PURPOSE +! Retrieves dataspace dimension size and maximum size. +! +! INPUTS +! space_id - dataspace identifier +! +! OUTPUTS +! dims - array to store size of each dimension +! maxdims - array to store maximum size of each dimension +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_simple_extent_dims_f(space_id, dims, maxdims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_simple_extent_dims_c(space_id, dims, maxdims) BIND(C,NAME='h5sget_simple_extent_dims_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims + INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims + END FUNCTION h5sget_simple_extent_dims_c + END INTERFACE + + hdferr = h5sget_simple_extent_dims_c(space_id, dims, maxdims) + + END SUBROUTINE h5sget_simple_extent_dims_f + +! +!****s* H5S/h5sget_simple_extent_type_f +! +! NAME +! h5sget_simple_extent_type_f +! +! PURPOSE +! Determine the current class of a dataspace +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! classtype - class type, possible values are: +! H5S_NO_CLASS_F +! H5S_SCALAR_F +! H5S_SIMPLE_F +! H5S_NULL_F +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sget_simple_extent_type_f(space_id, classtype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: classtype + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_simple_extent_type_c(space_id, classtype) BIND(C,NAME='h5sget_simple_extent_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: classtype + END FUNCTION h5sget_simple_extent_type_c + END INTERFACE + + hdferr = h5sget_simple_extent_type_c(space_id, classtype) + + END SUBROUTINE h5sget_simple_extent_type_f + ! +!****s* H5S/h5sset_extent_simple_f +! +! NAME +! h5sset_extent_simple_f +! +! PURPOSE +! Sets or resets the size of an existing dataspace. +! +! INPUTS +! space_id - dataspace identifier +! rank - dataspace number of dimensions +! current_size - array with the new sizes of dimensions +! maximum_size - array with the new maximum sizes of +! dimensions +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sset_extent_simple_f(space_id, rank, current_size, & + maximum_size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: current_size + INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sset_extent_simple_c(space_id, rank, & + current_size, maximum_size) BIND(C,NAME='h5sset_extent_simple_c') + IMPORT :: HID_T, HSIZE_T + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: current_size + INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size + END FUNCTION h5sset_extent_simple_c + END INTERFACE + + hdferr = h5sset_extent_simple_c(space_id, rank, current_size, & + maximum_size) + + END SUBROUTINE h5sset_extent_simple_f +! +!****s* H5S/h5sis_simple_f +! +! NAME +! h5sis_simple_f +! +! PURPOSE +! Determines whether a dataspace is a simple dataspace. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! status - flag to indicate if dataspace +! is simple or not (TRUE or FALSE) +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sis_simple_f(space_id, status, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + LOGICAL, INTENT(OUT) :: status + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: flag ! "TRUE/FALSE/ERROR from C" + + INTERFACE + INTEGER FUNCTION h5sis_simple_c(space_id, flag) BIND(C,NAME='h5sis_simple_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER :: flag + END FUNCTION h5sis_simple_c + END INTERFACE + + hdferr = h5sis_simple_c(space_id, flag) + status = .TRUE. + IF (flag .EQ. 0) status = .FALSE. + + END SUBROUTINE h5sis_simple_f + +! +!****s* H5S/h5soffset_simple_f +! +! NAME +! h5soffset_simple_f +! +! PURPOSE +! Sets the offset of a simple dataspace. +! +! INPUTS +! space_id - dataspace identifier +! offset - the offset at which to position the +! selection +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5soffset_simple_f(space_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), DIMENSION(*), INTENT(IN) :: offset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5soffset_simple_c(space_id, offset) BIND(C,NAME='h5soffset_simple_c') + IMPORT :: HID_T, HSSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER(HSSIZE_T), DIMENSION(*), INTENT(IN) :: offset + END FUNCTION h5soffset_simple_c + END INTERFACE + + hdferr = h5soffset_simple_c(space_id, offset) + + END SUBROUTINE h5soffset_simple_f + +! +!****s* H5S/h5sextent_copy_f +! +! NAME +! h5sextent_copy_f +! +! PURPOSE +! Copies the extent of a dataspace. +! +! INPUTS +! dest_space_id - the identifier for the dataspace to which +! the extent is copied +! source_space_id - the identifier for the dataspace from +! which the extent is copied +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! NONE +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! NOTES +! + +! SOURCE + SUBROUTINE h5sextent_copy_f(dest_space_id, source_space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dest_space_id + INTEGER(HID_T), INTENT(IN) :: source_space_id + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5sextent_copy_c(dest_space_id, source_space_id) BIND(C,NAME='h5sextent_copy_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dest_space_id + INTEGER(HID_T), INTENT(IN) :: source_space_id + END FUNCTION h5sextent_copy_c + END INTERFACE + + hdferr = h5sextent_copy_c(dest_space_id, source_space_id) + + END SUBROUTINE h5sextent_copy_f + +! +!****s* H5S/h5sset_extent_none_f +! +! NAME +! h5sset_extent_none_f +! +! PURPOSE +! Removes the extent from a dataspace. +! +! INPUTS +! space_id - dataspace identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sset_extent_none_f(space_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sset_extent_none_c(space_id) BIND(C,NAME='h5sset_extent_none_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + END FUNCTION h5sset_extent_none_c + END INTERFACE + + hdferr = h5sset_extent_none_c(space_id) + + END SUBROUTINE h5sset_extent_none_f +! +!****s* H5S/h5sselect_hyperslab_f +! +! NAME +! h5sselect_hyperslab_f +! +! PURPOSE +! Selects a hyperslab region to add to the current selected +! region +! +! INPUTS +! space_id - dataspace identifier +! operator - flag, valid values are: +! H5S_SELECT_SET_F +! H5S_SELECT_OR_F +! start - array with hyperslab offsets +! count - number of blocks included in the hyperslab +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! stride - array with hyperslab strides +! block - array with hyperslab block sizes +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 6, 2001 +! +! SOURCE + SUBROUTINE h5sselect_hyperslab_f(space_id, OPERATOR, start, count, & + hdferr, stride, BLOCK) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: OPERATOR + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count + INTEGER, INTENT(OUT) :: hdferr + INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: stride + INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: BLOCK +!***** + INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_block + INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_stride + INTEGER :: rank + INTEGER :: error1, error2 + + INTERFACE + INTEGER FUNCTION h5sselect_hyperslab_c(space_id, OPERATOR, & + start, count, stride, BLOCK) BIND(C,NAME='h5sselect_hyperslab_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(IN) :: OPERATOR + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: stride + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: BLOCK + END FUNCTION h5sselect_hyperslab_c + END INTERFACE + + IF (PRESENT(stride).AND. PRESENT(BLOCK)) THEN + hdferr = h5sselect_hyperslab_c(space_id, OPERATOR, start, count, & + stride, BLOCK) + RETURN + ENDIF + ! Case of optional parameters. + ! + ! Find the rank of the dataspace to allocate memery for + ! default stride and block arrays. + ! + CALL h5sget_simple_extent_ndims_f(space_id, rank, hdferr) + IF( hdferr .EQ. -1) RETURN + ! + IF (PRESENT(stride).AND. .NOT.PRESENT(BLOCK)) THEN + ALLOCATE(def_block(rank), stat=error1) + IF (error1.NE.0) THEN + hdferr = -1 + RETURN + ENDIF + def_block = 1 + hdferr = h5sselect_hyperslab_c(space_id, OPERATOR, start, count, & + stride, def_block) + DEALLOCATE(def_block) + RETURN + ENDIF + + IF (.NOT.PRESENT(stride).AND. PRESENT(BLOCK)) THEN + ALLOCATE(def_stride(rank), stat=error2) + IF (error2.NE.0) THEN + hdferr = -1 + RETURN + ENDIF + def_stride = 1 + hdferr = h5sselect_hyperslab_c(space_id, OPERATOR, start, count, & + def_stride, BLOCK) + DEALLOCATE(def_stride) + RETURN + ENDIF + ALLOCATE(def_block(rank), stat=error1) + ALLOCATE(def_stride(rank), stat=error2) + IF ((error1.NE.0) .OR. (error2.NE.0)) THEN + hdferr = -1 + RETURN + ENDIF + def_block = 1 + def_stride = 1 + hdferr = h5sselect_hyperslab_c(space_id, OPERATOR, start, count, & + def_stride, def_block) + DEALLOCATE(def_block) + DEALLOCATE(def_stride) + + END SUBROUTINE h5sselect_hyperslab_f +! !$! +! !$!****s* H5S/h5scombine_hyperslab_f +! !$! +! !$! NAME +! !$! h5scombine_hyperslab_f +! !$! +! !$! PURPOSE +! !$! Combine a hyperslab selection with the current +! !$! selection for a dataspace +! !$! +! !$! INPUTS +! !$! space_id - dataspace of selection to use +! !$! operator - flag, valid values are: +! !$! H5S_SELECT_NOOP_F +! !$! H5S_SELECT_SET_F +! !$! H5S_SELECT_OR_F +! !$! H5S_SELECT_AND_F +! !$! H5S_SELECT_XOR_F +! !$! H5S_SELECT_NOTB_F +! !$! H5S_SELECT_NOTA_F +! !$! H5S_SELECT_APPEND_F +! !$! H5S_SELECT_PREPEND_F +! !$! start - array with hyperslab offsets +! !$! count - number of blocks included in the +! !$! hyperslab +! !$! OUTPUTS +! !$! hyper_id - identifier for the new hyperslab +! !$! hdferr: - error code +! !$! Success: 0 +! !$! Failure: -1 +! !$! OPTIONAL PARAMETERS +! !$! stride - array with hyperslab strides +! !$! block - array with hyperslab block sizes +! !$! +! !$! AUTHOR +! !$! Elena Pourmal +! !$! October 7, 2002 +! !$! +! !$! HISTORY +! !$! +! !$! +! !$! NOTES +! !$! Commented out until 1.6 ? 10/08/2002 +! !$! +! !$! SOURCE +! SUBROUTINE h5scombine_hyperslab_f(space_id, operator, start, count, & +! hyper_id, hdferr, stride, block) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier +! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: + ! H5S_SELECT_NOOP_F + ! H5S_SELECT_SET_F + ! H5S_SELECT_OR_F + ! H5S_SELECT_AND_F + ! H5S_SELECT_XOR_F + ! H5S_SELECT_NOTB_F + ! H5S_SELECT_NOTA_F + ! H5S_SELECT_APPEND_F + ! H5S_SELECT_PREPEND_F + ! +! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start + ! Starting coordinates of the hyperslab +! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count + ! Number of blocks to select + ! from dataspace +! INTEGER(HID_T), INTENT(OUT) :: hyper_id ! New hyperslab identifier +! INTEGER, INTENT(OUT) :: hdferr ! Error code +! INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: stride + ! Array of how many elements to move + ! in each direction +! INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: block + ! Sizes of element block +! INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_block +! INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_stride +! INTEGER :: rank +! INTEGER :: error1, error2 + +! INTERFACE +! INTEGER FUNCTION h5scombine_hyperslab_c(space_id, operator, & +! start, count, stride, block, hyper_id) +! USE H5GLOBAL +! !DEC$IF DEFINED(HDF5F90_WINDOWS) +! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCOMBINE_HYPERSLAB_C'::h5scombine_hyperslab_c +! !DEC$ENDIF +! INTEGER(HID_T), INTENT(IN) :: space_id +! INTEGER, INTENT(IN) :: operator +! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start +! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count +! INTEGER(HSIZE_T), DIMENSION(*), OPTIONAL, INTENT(IN) :: stride +! INTEGER(HSIZE_T), DIMENSION(*), OPTIONAL, INTENT(IN) :: block +! INTEGER(HID_T), INTENT(OUT) :: hyper_id +! END FUNCTION h5scombine_hyperslab_c +! END INTERFACE + +! if (present(stride).and. present(block)) then +! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & +! stride, block, hyper_id) +! return +! endif + ! Case of optional parameters. + ! + ! Find the rank of the dataspace to allocate memery for + ! default stride and block arrays. + ! +! CALL h5sget_simple_extent_ndims_f(space_id, rank, hdferr) +! if( hdferr .EQ. -1) return + ! +! if (present(stride).and. .not.present(block)) then +! allocate(def_block(rank), stat=error1) +! if (error1.NE.0) then +! hdferr = -1 +! return +! endif +! def_block = 1 +! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & +! stride, def_block, hyper_id) +! deallocate(def_block) +! return +! endif + +! if (.not.present(stride).and. present(block)) then +! allocate(def_stride(rank), stat=error2) +! if (error2.NE.0) then +! hdferr = -1 +! return +! endif +! def_stride = 1 +! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & +! def_stride, block, hyper_id) +! deallocate(def_stride) +! return +! endif +! allocate(def_block(rank), stat=error1) +! allocate(def_stride(rank), stat=error2) +! if ((error1.NE.0) .OR. (error2.NE.0)) then +! hdferr = -1 +! return +! endif +! def_block = 1 +! def_stride = 1 +! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & +! def_stride, def_block, hyper_id) +! deallocate(def_block) +! deallocate(def_stride) + +! END SUBROUTINE h5scombine_hyperslab_f + +! !$! +! !$!****s* H5S/ +! !$! +! !$! NAME +! !$! h5scombine_select_f +! !$! +! !$! PURPOSE +! !$! Combine two hyperslab selections with an operation +! !$! and return a dataspace with resulting selection. +! !$! +! !$! INPUTS +! !$! space1_id - dataspace of selection to use +! !$! operator - flag, valid values are: +! !$! H5S_SELECT_NOOP_F +! !$! H5S_SELECT_SET_F +! !$! H5S_SELECT_OR_F +! !$! H5S_SELECT_AND_F +! !$! H5S_SELECT_XOR_F +! !$! H5S_SELECT_NOTB_F +! !$! H5S_SELECT_NOTA_F +! !$! H5S_SELECT_APPEND_F +! !$! H5S_SELECT_PREPEND_F +! !$! space2_id - dataspace of selection to use +! !$! OUTPUTS +! !$! ds_id - idataspace identifier with the new selection +! !$! hdferr: - error code +! !$! Success: 0 +! !$! Failure: -1 +! !$! OPTIONAL PARAMETERS - NONE +! !$! +! !$! AUTHOR +! !$! Elena Pourmal +! !$! October 7, 2002 +! !$! +! !$! HISTORY +! !$! +! !$! +! !$! NOTES commented out until 1.6 release(?) 10/08/2002 +! !$! + +! ! SOURCE +! !$ SUBROUTINE h5scombine_select_f(space1_id, operator, space2_id, & +! ds_id, hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: space1_id ! First dataspace identifier +! INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier +! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: + ! H5S_SELECT_NOOP_F + ! H5S_SELECT_SET_F + ! H5S_SELECT_OR_F + ! H5S_SELECT_AND_F + ! H5S_SELECT_XOR_F + ! H5S_SELECT_NOTB_F + ! H5S_SELECT_NOTA_F + ! H5S_SELECT_APPEND_F + ! H5S_SELECT_PREPEND_F + ! +! INTEGER(HID_T), INTENT(OUT) :: ds_id ! New dataspace identifier +! INTEGER, INTENT(OUT) :: hdferr ! Error code +! +! INTERFACE +! INTEGER FUNCTION h5scombine_select_c(space1_id, operator, & +! space2_id, ds_id) +! USE H5GLOBAL +! !DEC$IF DEFINED(HDF5F90_WINDOWS) +! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCOMBINE_SELECT_C'::h5scombine_select_c +! !DEC$ENDIF +! INTEGER(HID_T), INTENT(IN) :: space1_id +! INTEGER(HID_T), INTENT(IN) :: space2_id +! INTEGER, INTENT(IN) :: operator +! INTEGER(HID_T), INTENT(OUT) :: ds_id +! END FUNCTION h5scombine_select_c +! END INTERFACE + +! hdferr = h5scombine_select_c(space1_id, operator, space2_id, & +! ds_id) +! return + +! END SUBROUTINE h5scombine_select_f + +! !$! +! !$!****s* H5S/ +! !$! +! !$! NAME +! !$! h5sselect_select_f +! !$! +! !$! PURPOSE +! !$! Refine a hyperslab selection with an operation +! !$! using second hyperslab +! !$! +! !$! INPUTS +! !$! space1_id - dataspace of selection to modify +! !$! operator - flag, valid values are: +! !$! H5S_SELECT_NOOP_F +! !$! H5S_SELECT_SET_F +! !$! H5S_SELECT_OR_F +! !$! H5S_SELECT_AND_F +! !$! H5S_SELECT_XOR_F +! !$! H5S_SELECT_NOTB_F +! !$! H5S_SELECT_NOTA_F +! !$! H5S_SELECT_APPEND_F +! !$! H5S_SELECT_PREPEND_F +! !$! space2_id - dataspace of selection to use +! !$! +! !$! OUTPUTS +! !$! hdferr: - error code +! !$! Success: 0 +! !$! Failure: -1 +! !$! OPTIONAL PARAMETERS - NONE +! !$! +! !$! AUTHOR +! !$! Elena Pourmal +! !$! October 7, 2002 +! !$! +! !$! HISTORY +! !$! +! !$! +! !$! NOTESCommented out until 1.6 release(?) 10/08/2002 EIP +! !$! + +! ! SOURCE +! SUBROUTINE h5sselect_select_f(space1_id, operator, space2_id, & +! hdferr) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(INOUT) :: space1_id ! Dataspace identifier to + ! modify +! INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier +! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: + ! H5S_SELECT_NOOP_F + ! H5S_SELECT_SET_F + ! H5S_SELECT_OR_F + ! H5S_SELECT_AND_F + ! H5S_SELECT_XOR_F + ! H5S_SELECT_NOTB_F + ! H5S_SELECT_NOTA_F + ! H5S_SELECT_APPEND_F + ! H5S_SELECT_PREPEND_F + ! +! INTEGER, INTENT(OUT) :: hdferr ! Error code + +! INTERFACE +! INTEGER FUNCTION h5sselect_select_c(space1_id, operator, & +! space2_id) +! USE H5GLOBAL +! !DEC$IF DEFINED(HDF5F90_WINDOWS) +! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_SELECT_C'::h5sselect_select_c +! !DEC$ENDIF +! INTEGER(HID_T), INTENT(INOUT) :: space1_id +! INTEGER(HID_T), INTENT(IN) :: space2_id +! INTEGER, INTENT(IN) :: operator +! END FUNCTION h5sselect_select_c +! END INTERFACE + +! hdferr = h5sselect_select_c(space1_id, operator, space2_id) +! return + +! END SUBROUTINE h5sselect_select_f + +! +!****s* H5S/h5sget_select_type_f +! +! NAME +! h5sget_select_type_f +! +! PURPOSE +! Retrieve the type of selection +! +! INPUTS +! space_id - dataspace identifier with selection +! OUTPUTS +! type - selection type flag, valid values are: +! H5S_SEL_ERROR_F +! H5S_SEL_NONE_F +! H5S_SEL_POINTS_F +! H5S_SEL_HYPERSLABS_F +! H5S_SEL_ALL_F +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! October 7, 2002 +! +! SOURCE + SUBROUTINE h5sget_select_type_f(space_id, TYPE, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(INOUT) :: space_id + INTEGER, INTENT(OUT) :: TYPE + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sget_select_type_c(space_id, TYPE) BIND(C,NAME='h5sget_select_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space_id + INTEGER, INTENT(OUT) :: TYPE + END FUNCTION h5sget_select_type_c + END INTERFACE + + hdferr = h5sget_select_type_c(space_id, TYPE) + RETURN + + END SUBROUTINE h5sget_select_type_f + +! +!****s* H5S/H5Sdecode_f +! +! NAME +! H5Sdecode_f +! +! PURPOSE +! Decode a binary object description of data space and return a new object handle. +! +! INPUTS +! buf - Buffer for the data space object to be decoded. +! obj_id - Object ID +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! March 26, 2008 +! SOURCE + SUBROUTINE h5sdecode_f(buf, obj_id, hdferr) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: buf + INTEGER(HID_T), INTENT(OUT) :: obj_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5sdecode_c(buf, obj_id) BIND(C,NAME='h5sdecode_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: buf + INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID + END FUNCTION h5sdecode_c + END INTERFACE + + hdferr = h5sdecode_c(buf, obj_id) + + END SUBROUTINE h5sdecode_f + +! +!****s* H5S/H5Sencode_f +! +! NAME +! H5Sencode_f +! +! PURPOSE +! Encode a data space object description into a binary buffer. +! +! INPUTS +! obj_id - Identifier of the object to be encoded. +! buf - Buffer for the object to be encoded into. +! nalloc - The size of the allocated buffer. +! OUTPUTS +! nalloc - The size of the buffer needed. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! March 26, 2008 +! SOURCE + SUBROUTINE h5sencode_f(obj_id, buf, nalloc, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(LEN=*), INTENT(OUT) :: buf + INTEGER(SIZE_T), INTENT(INOUT) :: nalloc + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5sencode_c(buf, obj_id, nalloc) BIND(C,NAME='h5sencode_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buf + INTEGER(SIZE_T), INTENT(INOUT) :: nalloc + END FUNCTION h5sencode_c + END INTERFACE + + hdferr = h5sencode_c(buf, obj_id, nalloc) + + END SUBROUTINE h5sencode_f + +!****s* H5S/h5sextent_equal_f +! +! NAME +! h5sextent_equal_f +! +! PURPOSE +! Determines whether two dataspace extents are equal. +! +! INPUTS +! space1_id - First dataspace identifier. +! space2_id - Second dataspace identifier. +! OUTPUTS +! Equal - .TRUE. if equal, .FALSE. if unequal. +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! April 2, 2008 +! +! SOURCE + SUBROUTINE h5sextent_equal_f(space1_id, space2_id, equal, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space1_id + INTEGER(HID_T), INTENT(IN) :: space2_id + LOGICAL, INTENT(OUT) :: Equal + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER(HID_T) :: c_equal + + INTERFACE + INTEGER FUNCTION h5sextent_equal_c(space1_id, space2_id, c_equal) BIND(C,NAME='h5sextent_equal_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: space1_id + INTEGER(HID_T), INTENT(IN) :: space2_id + INTEGER(HID_T) :: c_equal + END FUNCTION h5sextent_equal_c + END INTERFACE + + hdferr = h5sextent_equal_c(space1_id, space2_id, c_equal) + equal = .FALSE. + IF(c_equal.GT.0) equal = .TRUE. + + END SUBROUTINE h5sextent_equal_f + +END MODULE H5S diff --git a/fortran/src/H5Sff.f90 b/fortran/src/H5Sff.f90 deleted file mode 100644 index c493d46..0000000 --- a/fortran/src/H5Sff.f90 +++ /dev/null @@ -1,1875 +0,0 @@ -!****h* ROBODoc/H5S -! -! NAME -! MODULE H5S -! -! FILE -! fortran/src/H5Sff.f90 -! -! PURPOSE -! This file contains Fortran interfaces for H5S functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5S function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5S - USE H5GLOBAL - -CONTAINS - -! -!****s* H5S/h5screate_simple_f -! -! NAME -! h5screate_simple_f -! -! PURPOSE -! Creates a new simple data space and opens it for access . -! -! INPUTS -! rank - number of dimensions -! dims - an array of the size of each dimension -! OUTPUTS -! space_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! maxdims - an array of the maximum size of each dimension -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! SOURCE - SUBROUTINE h5screate_simple_f(rank, dims, space_id, hdferr, maxdims) - - IMPLICIT NONE - INTEGER, INTENT(IN) :: rank ! Number of dataspace dimensions - INTEGER(HSIZE_T), INTENT(IN) :: dims(rank) - ! Array with the dimension - ! sizes - INTEGER(HID_T), INTENT(OUT) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HSIZE_T), OPTIONAL, INTENT(IN) :: maxdims(rank) - ! Array with the maximum - ! dimension sizes -!***** - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: f_maxdims - - INTERFACE - INTEGER FUNCTION h5screate_simple_c(rank, dims, maxdims, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCREATE_SIMPLE_C'::h5screate_simple_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: rank - INTEGER(HSIZE_T), INTENT(IN) :: dims(rank) - INTEGER(HSIZE_T), DIMENSION(:),INTENT(IN) :: maxdims(rank) - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5screate_simple_c - END INTERFACE - - allocate (f_maxdims(rank), stat=hdferr) - if (hdferr .NE. 0) then - hdferr = -1 - return - endif - if (present(maxdims)) then - f_maxdims = maxdims - else - f_maxdims = dims - endif - hdferr = h5screate_simple_c(rank, dims, f_maxdims, space_id) - deallocate(f_maxdims) - - END SUBROUTINE h5screate_simple_f - -! -!****s* H5S/h5sclose_f -! -! NAME -! h5sclose_f -! -! PURPOSE -! Releases and terminates access to a dataspace. -! -! INPUTS -! space_id - identifier of dataspace to release -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sclose_f(space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sclose_c(space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCLOSE_C'::h5sclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5sclose_c - END INTERFACE - - hdferr = h5sclose_c(space_id) - - END SUBROUTINE h5sclose_f - -! -!****s* H5S/h5screate_f -! -! NAME -! h5screate_f -! -! PURPOSE -! Creates a new dataspace of a specified type. -! -! INPUTS -! classtype - the type of the dataspace to be created -! OUTPUTS -! space_id - dataspace identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! NOTES -! - -! SOURCE - SUBROUTINE h5screate_f(classtype, space_id, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: classtype ! The type of the dataspace - ! to be created. - ! Possible values are: - ! H5S_SCALAR_F (0) - ! H5S_SIMPLE_F(1) - ! H5S_NULL_F(2) - INTEGER(HID_T), INTENT(OUT) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5screate_c(classtype, space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCREATE_C'::h5screate_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: classtype - INTEGER(HID_T), INTENT(OUT) :: space_id - END FUNCTION h5screate_c - END INTERFACE - - hdferr = h5screate_c(classtype, space_id) - - END SUBROUTINE h5screate_f - -! -!****s* H5S/h5scopy_f -! -! NAME -! h5scopy_f -! -! PURPOSE -! Creates an exact copy of a dataspace. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! new_space_id - identifier of dataspace's copy -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! NOTES -! - -! SOURCE - SUBROUTINE h5scopy_f(space_id, new_space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HID_T), INTENT(OUT) :: new_space_id - ! Identifier of dataspace's copy - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5scopy_c(space_id, new_space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCOPY_C'::h5scopy_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HID_T), INTENT(OUT):: new_space_id - END FUNCTION h5scopy_c - END INTERFACE - - hdferr = h5scopy_c(space_id, new_space_id) - - END SUBROUTINE h5scopy_f - -! -!****s* H5S/h5sget_select_hyper_nblocks_f -! -! NAME -! h5sget_select_hyper_nblocks_f -! -! PURPOSE -! Get number of hyperslab blocks. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! num_blocks - number of hyperslab blocks in the current -! hyperslab selection -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_select_hyper_nblocks_f(space_id, num_blocks, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSSIZE_T), INTENT(OUT) :: num_blocks - !number of hyperslab blocks - !in the current dataspace - !selection - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_hyper_nblocks_c (space_id, num_blocks) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) -! DEC$ ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_HYPER_NBLOCKS_C'::h5sget_select_hyper_nblocks_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSSIZE_T), INTENT(OUT) :: num_blocks - END FUNCTION h5sget_select_hyper_nblocks_c - END INTERFACE - - hdferr = h5sget_select_hyper_nblocks_c (space_id, num_blocks) - - END SUBROUTINE h5sget_select_hyper_nblocks_f - -! -!****s* H5S/h5sget_select_hyper_blocklist_f -! -! NAME -! h5sget_select_hyper_blocklist_f -! -! PURPOSE -! Gets the list of hyperslab blocks currently selected. -! -! INPUTS -! space_id - dataspace identifier -! startblock - hyperslab block to start with -! num_blocks - number of blocks to get -! OUTPUTS -! buf - buffer to hold block list -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! SOURCE - SUBROUTINE h5sget_select_hyper_blocklist_f(space_id, startblock, & - num_blocks, buf, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSIZE_T), INTENT(IN) :: startblock - !Hyperslab block to start with. - INTEGER(HSIZE_T), INTENT(IN) :: num_blocks - !number of hyperslab blocks - !to get in the current dataspace - !selection - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf - !List of hyperslab blocks selected - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5sget_select_hyper_blocklist_c(space_id, startblock, & - num_blocks, buf ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_HYPER_BLOCKLIST_C'::h5sget_select_hyper_blocklist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSIZE_T), INTENT(IN) :: startblock - INTEGER(HSIZE_T), INTENT(IN) :: num_blocks - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf - END FUNCTION h5sget_select_hyper_blocklist_c - END INTERFACE - - - hdferr = h5sget_select_hyper_blocklist_c(space_id, startblock, & - num_blocks, buf ) - - END SUBROUTINE h5sget_select_hyper_blocklist_f - -! -!****s* H5S/h5sget_select_bounds_f -! -! NAME -! h5sget_select_bounds_f -! -! PURPOSE -! Gets the bounding box containing the current selection. -! -! INPUTS -! space_id - dataspace identifier -! -! OUTPUTS -! start - starting coordinates of bounding box -! end - ending coordinates of bounding box -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! SOURCE - SUBROUTINE h5sget_select_bounds_f(space_id, start, END, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: start - ! Starting coordinates of the bounding box. - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: END - !Ending coordinates of the bounding box, - !i.e., the coordinates of the diagonally - !opposite corner - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_bounds_c(space_id, start, END) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_BOUNDS_C'::h5sget_select_bounds_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: start - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: END - END FUNCTION h5sget_select_bounds_c - END INTERFACE - - hdferr = h5sget_select_bounds_c(space_id, start, END) - - END SUBROUTINE h5sget_select_bounds_f - -! -!****s* H5S/h5sget_select_elem_npoints_f -! -! NAME -! h5sget_select_elem_npoints_f -! -! PURPOSE -! Gets the number of element points in the current selection -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! num_points - number of element points in the current -! dataspace selection -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_select_elem_npoints_f(space_id, num_points, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSSIZE_T), INTENT(OUT) :: num_points - !number of element points - !in the current dataspace - !selection - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_elem_npoints_c (space_id, num_points) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) -! DEC$ ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_ELEM_NPOINTS_C'::h5sget_select_elem_npoints_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSSIZE_T), INTENT(OUT) :: num_points - END FUNCTION h5sget_select_elem_npoints_c - END INTERFACE - - hdferr = h5sget_select_elem_npoints_c (space_id, num_points) - - END SUBROUTINE h5sget_select_elem_npoints_f - -! -!****s* H5S/h5sget_select_elem_pointlist_f -! -! NAME -! h5sget_select_elem_pointlist_f -! -! PURPOSE -! Gets the list of element points currently selected. -! -! INPUTS -! space_id - dataspace identifier -! startpoint - element point to start with -! num_points - number of elemnt points to get -! OUTPUTS -! buf - buffer with element points selected -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_select_elem_pointlist_f(space_id, startpoint, & - num_points, buf, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSIZE_T), INTENT(IN) :: startpoint - !Element point to start with. - INTEGER(HSIZE_T), INTENT(IN) :: num_points - !Number of element points to get - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf - !List of element points selected - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_elem_pointlist_c(space_id, startpoint, & - num_points, buf ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) -! DEC$ ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_ELEM_POINTLIST_C'::h5sget_select_elem_pointlist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSIZE_T), INTENT(IN) :: startpoint - INTEGER(HSIZE_T), INTENT(IN) :: num_points - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: buf - END FUNCTION h5sget_select_elem_pointlist_c - END INTERFACE - - hdferr = h5sget_select_elem_pointlist_c(space_id, startpoint, & - num_points, buf ) - - END SUBROUTINE h5sget_select_elem_pointlist_f - -! -!****s* H5S/h5sselect_elements_f -! -! NAME -! h5sselect_elements_f -! -! PURPOSE -! Selects elements to be included in the selection for -! a dataspace -! -! INPUTS -! space_id - dataspace identifier -! operator - flag, valid values are: -! H5S_SELECT_SET_F -! H5S_SELECT_APPEND_F -! H5S_SELECT_PREPEND_F -! rank - number of dataspace dimensions -! num_elements - number of elements to be selected -! coord - 2D (rank x num_elements) array with the -! elements coordinates ( 1-based); in C the -! array is stored in 2D as (num_element x rank) -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! SOURCE - SUBROUTINE h5sselect_elements_f(space_id, OPERATOR, rank, & - num_elements, coord, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(IN) :: OPERATOR - INTEGER, INTENT(IN) :: rank - INTEGER(SIZE_T), INTENT(IN) :: num_elements - INTEGER(HSIZE_T), INTENT(IN) , DIMENSION(rank,num_elements) :: coord - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:,:) :: c_coord - INTEGER :: error, i - - INTERFACE - INTEGER FUNCTION h5sselect_elements_c(space_id, OPERATOR,& - num_elements,c_c_coord) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_ELEMENTS_C'::h5sselect_elements_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(IN) :: OPERATOR - INTEGER(SIZE_T), INTENT(IN) :: num_elements - INTEGER(HSIZE_T),DIMENSION(*) :: c_c_coord - END FUNCTION h5sselect_elements_c - END INTERFACE - - ALLOCATE(c_coord(rank,num_elements), STAT = error) - IF (error.NE. 0) THEN - hdferr = -1 - RETURN - ENDIF - DO i = 1, rank - c_coord(i,:) = coord(rank-i+1, :) - 1 - ENDDO - hdferr = h5sselect_elements_c(space_id, OPERATOR, num_elements, c_coord) - -! ALLOCATE(c_coord(num_elements,rank), stat = error) -! IF (error.NE. 0) THEN -! hdferr = -1 -! RETURN -! ENDIF -! -! c_coord = TRANSPOSE(coord) -! hdferr = h5sselect_elements_c(space_id, OPERATOR, INT(rank,size_t), c_coord) - - - DEALLOCATE(c_coord) - - END SUBROUTINE h5sselect_elements_f - -! -!****s* H5S/h5sselect_all_f -! -! NAME -! h5sselect_all_f -! -! PURPOSE -! Selects the entire dataspace. -! -! INPUTS -! space_id - Identifier for the dataspace in which -! selection being made -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sselect_all_f(space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sselect_all_c(space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_ALL_C'::h5sselect_all_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5sselect_all_c - END INTERFACE - - hdferr = h5sselect_all_c(space_id) - - END SUBROUTINE h5sselect_all_f - -! -!****s* H5S/h5sselect_none_f -! -! NAME -! h5sselect_none_f -! -! PURPOSE -! Resets the selection region to include no elements. -! -! INPUTS -! space_id - the identifier for the dataspace in which -! the selection is being reset. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sselect_none_f(space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sselect_none_c(space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_NONE_C'::h5sselect_none_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5sselect_none_c - END INTERFACE - - hdferr = h5sselect_none_c(space_id) - - END SUBROUTINE h5sselect_none_f - -! -!****s* H5S/h5sselect_valid_f -! -! NAME -! h5sselect_valid_f -! -! PURPOSE -! Verifies that the selection is within the extent of -! the dataspace. -! -! INPUTS -! space_id - identifier for the dataspace for which -! selection is verified -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sselect_valid_f(space_id, status, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - LOGICAL, INTENT(OUT) :: status ! TRUE if the selection is - ! contained within the extent, - ! FALSE otherwise. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: flag ! "TRUE/FALSE/ERROR" flag from C routine - - INTERFACE - INTEGER FUNCTION h5sselect_valid_c(space_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_VALID_C'::h5sselect_valid_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER :: flag - END FUNCTION h5sselect_valid_c - END INTERFACE - - hdferr = h5sselect_valid_c(space_id, flag) - status = .TRUE. - if (flag .EQ. 0) status = .FALSE. - - END SUBROUTINE h5sselect_valid_f - -! -!****s* H5S/h5sget_simple_extent_npoints_f -! -! NAME -! h5sget_simple_extent_npoints_f -! -! PURPOSE -! Determines the number of elements in a dataspace. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! npoints - number of elements in the dataspace -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_simple_extent_npoints_f(space_id, npoints, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSIZE_T), INTENT(OUT) :: npoints ! Number of elements in - ! dataspace - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_simple_extent_npoints_c( space_id, npoints) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SIMPLE_EXTENT_NPOINTS_C'::h5sget_simple_extent_npoints_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSIZE_T), INTENT(OUT) :: npoints - END FUNCTION h5sget_simple_extent_npoints_c - END INTERFACE - - hdferr = h5sget_simple_extent_npoints_c( space_id, npoints) - - END SUBROUTINE h5sget_simple_extent_npoints_f - -! -!****s* H5S/h5sget_select_npoints_f -! -! NAME -! h5sget_select_npoints_f -! -! PURPOSE -! Determines the number of elements in a dataspace selection. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! npoints - number of points in the dataspace selection -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! SOURCE - SUBROUTINE h5sget_select_npoints_f(space_id, npoints, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSSIZE_T), INTENT(OUT) :: npoints ! Number of elements in the - ! selection - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_npoints_c(space_id, npoints) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_NPOINTS_C'::h5sget_select_npoints_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSSIZE_T), INTENT(OUT) :: npoints - END FUNCTION h5sget_select_npoints_c - END INTERFACE - - hdferr = h5sget_select_npoints_c(space_id, npoints) - - END SUBROUTINE h5sget_select_npoints_f - -! -!****s* H5S/h5sget_simple_extent_ndims_f -! -! NAME -! h5sget_simple_extent_ndims_f -! -! PURPOSE -! Determines the dimensionality of a dataspace -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! rank - number of dataspace dimensions -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_simple_extent_ndims_f(space_id, rank, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: rank ! Number of dimensions - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_simple_extent_ndims_c(space_id, rank) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SIMPLE_EXTENT_NDIMS_C'::h5sget_simple_extent_ndims_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(OUT) :: rank - END FUNCTION h5sget_simple_extent_ndims_c - END INTERFACE - - hdferr = h5sget_simple_extent_ndims_c(space_id, rank) - - END SUBROUTINE h5sget_simple_extent_ndims_f -! -!****s* H5S/h5sget_simple_extent_dims_f -! -! NAME -! h5sget_simple_extent_dims_f -! -! PURPOSE -! Retrieves dataspace dimension size and maximum size. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! dims - array to store size of each dimension -! maxdims - array to store maximum size of each -! dimension -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_simple_extent_dims_f(space_id, dims, maxdims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims - ! Array to store dimension sizes - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims - ! Array to store max dimension - ! sizes - INTEGER, INTENT(OUT) :: hdferr ! Error code: -1 on failure, - ! number of dimensions on - ! on success -!***** - INTERFACE - INTEGER FUNCTION h5sget_simple_extent_dims_c(space_id, dims, maxdims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SIMPLE_EXTENT_DIMS_C'::h5sget_simple_extent_dims_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: dims - INTEGER(HSIZE_T), DIMENSION(*), INTENT(OUT) :: maxdims - END FUNCTION h5sget_simple_extent_dims_c - END INTERFACE - - hdferr = h5sget_simple_extent_dims_c(space_id, dims, maxdims) - - END SUBROUTINE h5sget_simple_extent_dims_f - -! -!****s* H5S/h5sget_simple_extent_type_f -! -! NAME -! h5sget_simple_extent_type_f -! -! PURPOSE -! Determine the current class of a dataspace -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! classtype - class type, possible values are: -! H5S_NO_CLASS_F (-1) -! H5S_SCALAR_F (0) -! H5S_SIMPLE_F (1) -! H5S_NULL_F (2) -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sget_simple_extent_type_f(space_id, classtype, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: classtype ! Class type , possible values - ! are: - ! H5S_NO_CLASS_F (-1) - ! H5S_SCALAR_F (0) - ! H5S_SIMPLE_F (1) - ! H5S_NULL_F (2) - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_simple_extent_type_c(space_id, classtype) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SIMPLE_EXTENT_TYPE_C'::h5sget_simple_extent_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(OUT) :: classtype - END FUNCTION h5sget_simple_extent_type_c - END INTERFACE - - hdferr = h5sget_simple_extent_type_c(space_id, classtype) - - END SUBROUTINE h5sget_simple_extent_type_f -! -!****s* H5S/h5sset_extent_simple_f -! -! NAME -! h5sset_extent_simple_f -! -! PURPOSE -! Sets or resets the size of an existing dataspace. -! -! INPUTS -! space_id - dataspace identifier -! rank - dataspace number of dimensions -! current_size - array with the new sizes of dimensions -! maximum_size - array with the new maximum sizes of -! dimensions -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sset_extent_simple_f(space_id, rank, current_size, & - maximum_size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(IN) :: rank ! Dataspace rank - INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: current_size - ! Array with the new sizes - ! of dimensions - INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size - ! Array with the new maximum - ! sizes of dimensions - ! sizes - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sset_extent_simple_c(space_id, rank, & - current_size, maximum_size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSET_EXTENT_SIMPLE_C'::h5sset_extent_simple_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(IN) :: rank - INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: current_size - INTEGER(HSIZE_T), DIMENSION(rank), INTENT(IN) :: maximum_size - END FUNCTION h5sset_extent_simple_c - END INTERFACE - - hdferr = h5sset_extent_simple_c(space_id, rank, current_size, & - maximum_size) - - END SUBROUTINE h5sset_extent_simple_f -! -!****s* H5S/h5sis_simple_f -! -! NAME -! h5sis_simple_f -! -! PURPOSE -! Determines whether a dataspace is a simple dataspace. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! status - flag to indicate if dataspace -! is simple or not -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sis_simple_f(space_id, status, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - LOGICAL, INTENT(OUT) :: status ! Flag, idicates if dataspace - ! is simple or not ( TRUE or - ! FALSE) - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: flag ! "TRUE/FALSE/ERROR from C" - - INTERFACE - INTEGER FUNCTION h5sis_simple_c(space_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SIS_SIMPLE_C'::h5sis_simple_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER :: flag - END FUNCTION h5sis_simple_c - END INTERFACE - - hdferr = h5sis_simple_c(space_id, flag) - status = .TRUE. - if (flag .EQ. 0) status = .FALSE. - - END SUBROUTINE h5sis_simple_f - -! -!****s* H5S/h5soffset_simple_f -! -! NAME -! h5soffset_simple_f -! -! PURPOSE -! Sets the offset of a simple dataspace. -! -! INPUTS -! space_id - dataspace identifier -! offset - the offset at which to position the -! selection -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5soffset_simple_f(space_id, offset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER(HSSIZE_T), DIMENSION(*), INTENT(IN) :: offset - ! The offset at which to position - ! the selection - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5soffset_simple_c(space_id, offset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SOFFSET_SIMPLE_C'::h5soffset_simple_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER(HSSIZE_T), DIMENSION(*), INTENT(IN) :: offset - END FUNCTION h5soffset_simple_c - END INTERFACE - - hdferr = h5soffset_simple_c(space_id, offset) - - END SUBROUTINE h5soffset_simple_f - -! -!****s* H5S/h5sextent_copy_f -! -! NAME -! h5sextent_copy_f -! -! PURPOSE -! Copies the extent of a dataspace. -! -! INPUTS -! dest_space_id - the identifier for the dataspace to which -! the extent is copied -! source_space_id - the identifier for the dataspace from -! which the extent is copied -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! NONE -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! NOTES -! - -! SOURCE - SUBROUTINE h5sextent_copy_f(dest_space_id, source_space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dest_space_id ! Identifier of destination - ! dataspace - INTEGER(HID_T), INTENT(IN) :: source_space_id ! Identifier of source - ! dataspace - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sextent_copy_c(dest_space_id, source_space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SEXTENT_COPY_C'::h5sextent_copy_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dest_space_id - INTEGER(HID_T), INTENT(IN) :: source_space_id - END FUNCTION h5sextent_copy_c - END INTERFACE - - hdferr = h5sextent_copy_c(dest_space_id, source_space_id) - - END SUBROUTINE h5sextent_copy_f - -! -!****s* H5S/h5sset_extent_none_f -! -! NAME -! h5sset_extent_none_f -! -! PURPOSE -! Removes the extent from a dataspace. -! -! INPUTS -! space_id - dataspace identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sset_extent_none_f(space_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sset_extent_none_c(space_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSET_EXTENT_NONE_C'::h5sset_extent_none_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - END FUNCTION h5sset_extent_none_c - END INTERFACE - - hdferr = h5sset_extent_none_c(space_id) - - END SUBROUTINE h5sset_extent_none_f - -! -!****s* H5S/h5sselect_hyperslab_f -! -! NAME -! h5sselect_hyperslab_f -! -! PURPOSE -! Selects a hyperslab region to add to the current selected -! region -! -! INPUTS -! space_id - dataspace identifier -! operator - flag, valid values are: -! H5S_SELECT_SET_F (0) -! H5S_SELECT_OR_F (1) -! start - array with hyperslab offsets -! count - number of blocks included in the -! hyperslab -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! stride - array with hyperslab strides -! block - array with hyperslab block sizes -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 6, 2001 -! -! SOURCE - SUBROUTINE h5sselect_hyperslab_f(space_id, operator, start, count, & - hdferr, stride, block) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier - INTEGER, INTENT(IN) :: operator ! Flag, valid values are: - ! H5S_SELECT_SET_F (0) - ! H5S_SELECT_OR_F (1) - ! - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start - ! Starting coordinates of the hyperslab - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count - ! Number of blocks to select - ! from dataspace - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: stride - ! Array of how many elements to move - ! in each direction - INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: block - ! Sizes of element block -!***** - INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_block - INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_stride - INTEGER :: rank - INTEGER :: error1, error2 - - INTERFACE - INTEGER FUNCTION h5sselect_hyperslab_c(space_id, operator, & - start, count, stride, block) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_HYPERSLAB_C'::h5sselect_hyperslab_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(IN) :: operator - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: stride - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: block - END FUNCTION h5sselect_hyperslab_c - END INTERFACE - - if (present(stride).and. present(block)) then - hdferr = h5sselect_hyperslab_c(space_id, operator, start, count, & - stride, block) - return - endif - ! Case of optional parameters. - ! - ! Find the rank of the dataspace to allocate memery for - ! default stride and block arrays. - ! - CALL h5sget_simple_extent_ndims_f(space_id, rank, hdferr) - if( hdferr .EQ. -1) return - ! - if (present(stride).and. .not.present(block)) then - allocate(def_block(rank), stat=error1) - if (error1.NE.0) then - hdferr = -1 - return - endif - def_block = 1 - hdferr = h5sselect_hyperslab_c(space_id, operator, start, count, & - stride, def_block) - deallocate(def_block) - return - endif - - if (.not.present(stride).and. present(block)) then - allocate(def_stride(rank), stat=error2) - if (error2.NE.0) then - hdferr = -1 - return - endif - def_stride = 1 - hdferr = h5sselect_hyperslab_c(space_id, operator, start, count, & - def_stride, block) - deallocate(def_stride) - return - endif - allocate(def_block(rank), stat=error1) - allocate(def_stride(rank), stat=error2) - if ((error1.NE.0) .OR. (error2.NE.0)) then - hdferr = -1 - return - endif - def_block = 1 - def_stride = 1 - hdferr = h5sselect_hyperslab_c(space_id, operator, start, count, & - def_stride, def_block) - deallocate(def_block) - deallocate(def_stride) - - END SUBROUTINE h5sselect_hyperslab_f -! !$! -! !$!****s* H5S/h5scombine_hyperslab_f -! !$! -! !$! NAME -! !$! h5scombine_hyperslab_f -! !$! -! !$! PURPOSE -! !$! Combine a hyperslab selection with the current -! !$! selection for a dataspace -! !$! -! !$! INPUTS -! !$! space_id - dataspace of selection to use -! !$! operator - flag, valid values are: -! !$! H5S_SELECT_NOOP_F -! !$! H5S_SELECT_SET_F -! !$! H5S_SELECT_OR_F -! !$! H5S_SELECT_AND_F -! !$! H5S_SELECT_XOR_F -! !$! H5S_SELECT_NOTB_F -! !$! H5S_SELECT_NOTA_F -! !$! H5S_SELECT_APPEND_F -! !$! H5S_SELECT_PREPEND_F -! !$! start - array with hyperslab offsets -! !$! count - number of blocks included in the -! !$! hyperslab -! !$! OUTPUTS -! !$! hyper_id - identifier for the new hyperslab -! !$! hdferr: - error code -! !$! Success: 0 -! !$! Failure: -1 -! !$! OPTIONAL PARAMETERS -! !$! stride - array with hyperslab strides -! !$! block - array with hyperslab block sizes -! !$! -! !$! AUTHOR -! !$! Elena Pourmal -! !$! October 7, 2002 -! !$! -! !$! HISTORY -! !$! -! !$! -! !$! NOTES -! !$! Commented out until 1.6 ? 10/08/2002 -! !$! -! !$! SOURCE -! SUBROUTINE h5scombine_hyperslab_f(space_id, operator, start, count, & -! hyper_id, hdferr, stride, block) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: space_id ! Dataspace identifier -! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: - ! H5S_SELECT_NOOP_F - ! H5S_SELECT_SET_F - ! H5S_SELECT_OR_F - ! H5S_SELECT_AND_F - ! H5S_SELECT_XOR_F - ! H5S_SELECT_NOTB_F - ! H5S_SELECT_NOTA_F - ! H5S_SELECT_APPEND_F - ! H5S_SELECT_PREPEND_F - ! -! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start - ! Starting coordinates of the hyperslab -! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count - ! Number of blocks to select - ! from dataspace -! INTEGER(HID_T), INTENT(OUT) :: hyper_id ! New hyperslab identifier -! INTEGER, INTENT(OUT) :: hdferr ! Error code -! INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: stride - ! Array of how many elements to move - ! in each direction -! INTEGER(HSIZE_T), DIMENSION(:), OPTIONAL, INTENT(IN) :: block - ! Sizes of element block -! INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_block -! INTEGER(HSIZE_T), DIMENSION(:), ALLOCATABLE :: def_stride -! INTEGER :: rank -! INTEGER :: error1, error2 - -! INTERFACE -! INTEGER FUNCTION h5scombine_hyperslab_c(space_id, operator, & -! start, count, stride, block, hyper_id) -! USE H5GLOBAL -! !DEC$IF DEFINED(HDF5F90_WINDOWS) -! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCOMBINE_HYPERSLAB_C'::h5scombine_hyperslab_c -! !DEC$ENDIF -! INTEGER(HID_T), INTENT(IN) :: space_id -! INTEGER, INTENT(IN) :: operator -! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: start -! INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: count -! INTEGER(HSIZE_T), DIMENSION(*), OPTIONAL, INTENT(IN) :: stride -! INTEGER(HSIZE_T), DIMENSION(*), OPTIONAL, INTENT(IN) :: block -! INTEGER(HID_T), INTENT(OUT) :: hyper_id -! END FUNCTION h5scombine_hyperslab_c -! END INTERFACE - -! if (present(stride).and. present(block)) then -! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & -! stride, block, hyper_id) -! return -! endif - ! Case of optional parameters. - ! - ! Find the rank of the dataspace to allocate memery for - ! default stride and block arrays. - ! -! CALL h5sget_simple_extent_ndims_f(space_id, rank, hdferr) -! if( hdferr .EQ. -1) return - ! -! if (present(stride).and. .not.present(block)) then -! allocate(def_block(rank), stat=error1) -! if (error1.NE.0) then -! hdferr = -1 -! return -! endif -! def_block = 1 -! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & -! stride, def_block, hyper_id) -! deallocate(def_block) -! return -! endif - -! if (.not.present(stride).and. present(block)) then -! allocate(def_stride(rank), stat=error2) -! if (error2.NE.0) then -! hdferr = -1 -! return -! endif -! def_stride = 1 -! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & -! def_stride, block, hyper_id) -! deallocate(def_stride) -! return -! endif -! allocate(def_block(rank), stat=error1) -! allocate(def_stride(rank), stat=error2) -! if ((error1.NE.0) .OR. (error2.NE.0)) then -! hdferr = -1 -! return -! endif -! def_block = 1 -! def_stride = 1 -! hdferr = h5scombine_hyperslab_c(space_id, operator, start, count, & -! def_stride, def_block, hyper_id) -! deallocate(def_block) -! deallocate(def_stride) - -! END SUBROUTINE h5scombine_hyperslab_f - -! !$! -! !$!****s* H5S/ -! !$! -! !$! NAME -! !$! h5scombine_select_f -! !$! -! !$! PURPOSE -! !$! Combine two hyperslab selections with an operation -! !$! and return a dataspace with resulting selection. -! !$! -! !$! INPUTS -! !$! space1_id - dataspace of selection to use -! !$! operator - flag, valid values are: -! !$! H5S_SELECT_NOOP_F -! !$! H5S_SELECT_SET_F -! !$! H5S_SELECT_OR_F -! !$! H5S_SELECT_AND_F -! !$! H5S_SELECT_XOR_F -! !$! H5S_SELECT_NOTB_F -! !$! H5S_SELECT_NOTA_F -! !$! H5S_SELECT_APPEND_F -! !$! H5S_SELECT_PREPEND_F -! !$! space2_id - dataspace of selection to use -! !$! OUTPUTS -! !$! ds_id - idataspace identifier with the new selection -! !$! hdferr: - error code -! !$! Success: 0 -! !$! Failure: -1 -! !$! OPTIONAL PARAMETERS - NONE -! !$! -! !$! AUTHOR -! !$! Elena Pourmal -! !$! October 7, 2002 -! !$! -! !$! HISTORY -! !$! -! !$! -! !$! NOTES commented out until 1.6 release(?) 10/08/2002 -! !$! - -! ! SOURCE -! !$ SUBROUTINE h5scombine_select_f(space1_id, operator, space2_id, & -! ds_id, hdferr) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: space1_id ! First dataspace identifier -! INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier -! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: - ! H5S_SELECT_NOOP_F - ! H5S_SELECT_SET_F - ! H5S_SELECT_OR_F - ! H5S_SELECT_AND_F - ! H5S_SELECT_XOR_F - ! H5S_SELECT_NOTB_F - ! H5S_SELECT_NOTA_F - ! H5S_SELECT_APPEND_F - ! H5S_SELECT_PREPEND_F - ! -! INTEGER(HID_T), INTENT(OUT) :: ds_id ! New dataspace identifier -! INTEGER, INTENT(OUT) :: hdferr ! Error code -! -! INTERFACE -! INTEGER FUNCTION h5scombine_select_c(space1_id, operator, & -! space2_id, ds_id) -! USE H5GLOBAL -! !DEC$IF DEFINED(HDF5F90_WINDOWS) -! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SCOMBINE_SELECT_C'::h5scombine_select_c -! !DEC$ENDIF -! INTEGER(HID_T), INTENT(IN) :: space1_id -! INTEGER(HID_T), INTENT(IN) :: space2_id -! INTEGER, INTENT(IN) :: operator -! INTEGER(HID_T), INTENT(OUT) :: ds_id -! END FUNCTION h5scombine_select_c -! END INTERFACE - -! hdferr = h5scombine_select_c(space1_id, operator, space2_id, & -! ds_id) -! return - -! END SUBROUTINE h5scombine_select_f - -! !$! -! !$!****s* H5S/ -! !$! -! !$! NAME -! !$! h5sselect_select_f -! !$! -! !$! PURPOSE -! !$! Refine a hyperslab selection with an operation -! !$! using second hyperslab -! !$! -! !$! INPUTS -! !$! space1_id - dataspace of selection to modify -! !$! operator - flag, valid values are: -! !$! H5S_SELECT_NOOP_F -! !$! H5S_SELECT_SET_F -! !$! H5S_SELECT_OR_F -! !$! H5S_SELECT_AND_F -! !$! H5S_SELECT_XOR_F -! !$! H5S_SELECT_NOTB_F -! !$! H5S_SELECT_NOTA_F -! !$! H5S_SELECT_APPEND_F -! !$! H5S_SELECT_PREPEND_F -! !$! space2_id - dataspace of selection to use -! !$! -! !$! OUTPUTS -! !$! hdferr: - error code -! !$! Success: 0 -! !$! Failure: -1 -! !$! OPTIONAL PARAMETERS - NONE -! !$! -! !$! AUTHOR -! !$! Elena Pourmal -! !$! October 7, 2002 -! !$! -! !$! HISTORY -! !$! -! !$! -! !$! NOTESCommented out until 1.6 release(?) 10/08/2002 EIP -! !$! - -! ! SOURCE -! SUBROUTINE h5sselect_select_f(space1_id, operator, space2_id, & -! hdferr) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(INOUT) :: space1_id ! Dataspace identifier to - ! modify -! INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier -! INTEGER, INTENT(IN) :: operator ! Flag, valid values are: - ! H5S_SELECT_NOOP_F - ! H5S_SELECT_SET_F - ! H5S_SELECT_OR_F - ! H5S_SELECT_AND_F - ! H5S_SELECT_XOR_F - ! H5S_SELECT_NOTB_F - ! H5S_SELECT_NOTA_F - ! H5S_SELECT_APPEND_F - ! H5S_SELECT_PREPEND_F - ! -! INTEGER, INTENT(OUT) :: hdferr ! Error code - -! INTERFACE -! INTEGER FUNCTION h5sselect_select_c(space1_id, operator, & -! space2_id) -! USE H5GLOBAL -! !DEC$IF DEFINED(HDF5F90_WINDOWS) -! !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SSELECT_SELECT_C'::h5sselect_select_c -! !DEC$ENDIF -! INTEGER(HID_T), INTENT(INOUT) :: space1_id -! INTEGER(HID_T), INTENT(IN) :: space2_id -! INTEGER, INTENT(IN) :: operator -! END FUNCTION h5sselect_select_c -! END INTERFACE - -! hdferr = h5sselect_select_c(space1_id, operator, space2_id) -! return - -! END SUBROUTINE h5sselect_select_f - -! -!****s* H5S/h5sget_select_type_f -! -! NAME -! h5sget_select_type_f -! -! PURPOSE -! Retrieve the type of selection -! -! INPUTS -! space_id - dataspace iidentifier with selection -! OUTPUTS -! type - flag, valid values are: -! H5S_SEL_ERROR_F -! H5S_SEL_NONE_F -! H5S_SEL_POINTS_F -! H5S_SEL_HYPERSLABS_F -! H5S_SEL_ALL_F -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! October 7, 2002 -! -! SOURCE - SUBROUTINE h5sget_select_type_f(space_id, type, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(INOUT) :: space_id ! Dataspace identifier to - INTEGER, INTENT(OUT) :: type ! Selection type - ! H5S_SEL_ERROR_F - ! H5S_SEL_NONE_F - ! H5S_SEL_POINTS_F - ! H5S_SEL_HYPERSLABS_F - ! H5S_SEL_ALL_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sget_select_type_c(space_id, type) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SGET_SELECT_TYPE_C'::h5sget_select_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space_id - INTEGER, INTENT(OUT) :: type - END FUNCTION h5sget_select_type_c - END INTERFACE - - hdferr = h5sget_select_type_c(space_id, type) - return - - END SUBROUTINE h5sget_select_type_f - -! -!****s* H5S/H5Sdecode_f -! -! NAME -! H5Sdecode_f -! -! PURPOSE -! Decode a binary object description of data space and return a new object handle. -! -! INPUTS -! buf - Buffer for the data space object to be decoded. -! obj_id - Object ID -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! March 26, 2008 -! SOURCE - SUBROUTINE h5sdecode_f(buf, obj_id, hdferr) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: buf ! Buffer for the data space object to be decoded. - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5sdecode_c(buf, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SDECODE_C'::h5sdecode_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - CHARACTER(LEN=*), INTENT(IN) :: buf - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID - END FUNCTION h5sdecode_c - END INTERFACE - - hdferr = h5sdecode_c(buf, obj_id) - - END SUBROUTINE h5sdecode_f - -! -!****s* H5S/H5Sencode_f -! -! NAME -! H5Sencode_f -! -! PURPOSE -! Encode a data space object description into a binary buffer. -! -! INPUTS -! obj_id - Identifier of the object to be encoded. -! buf - Buffer for the object to be encoded into. -! nalloc - The size of the allocated buffer. -! OUTPUTS -! nalloc - The size of the buffer needed. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! March 26, 2008 -! SOURCE - SUBROUTINE h5sencode_f(obj_id, buf, nalloc, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Identifier of the object to be encoded. - CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer for the object to be encoded into. - INTEGER(SIZE_T), INTENT(INOUT) :: nalloc ! The size of the allocated buffer. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5sencode_c(buf, obj_id, nalloc) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SENCODE_C'::h5sencode_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(OUT) :: buf - INTEGER(SIZE_T), INTENT(INOUT) :: nalloc - END FUNCTION h5sencode_c - END INTERFACE - - hdferr = h5sencode_c(buf, obj_id, nalloc) - - END SUBROUTINE h5sencode_f - -!****s* H5S/h5sextent_equal_f -! -! NAME -! h5sextent_equal_f -! -! PURPOSE -! Determines whether two dataspace extents are equal. -! -! INPUTS -! space1_id - First dataspace identifier. -! space2_id - Second dataspace identifier. -! OUTPUTS -! Equal - .TRUE. if equal, .FALSE. if unequal. -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! April 2, 2008 -! -! SOURCE - SUBROUTINE h5sextent_equal_f(space1_id, space2_id, equal, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: space1_id ! First dataspace identifier. - INTEGER(HID_T), INTENT(IN) :: space2_id ! Second dataspace identifier. - LOGICAL, INTENT(OUT) :: Equal ! .TRUE. if equal, .FALSE. if unequal. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER(HID_T) :: c_equal - - INTERFACE - INTEGER FUNCTION h5sextent_equal_c(space1_id, space2_id, c_equal) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5SEXTENT_EQUAL_C'::h5sextent_equal_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: space1_id - INTEGER(HID_T), INTENT(IN) :: space2_id - INTEGER(HID_T) :: c_equal - END FUNCTION h5sextent_equal_c - END INTERFACE - - hdferr = h5sextent_equal_c(space1_id, space2_id, c_equal) - - - equal = .FALSE. - IF(c_equal.GT.0) equal = .TRUE. - - - END SUBROUTINE h5sextent_equal_f - -END MODULE H5S diff --git a/fortran/src/H5Tf.c b/fortran/src/H5Tf.c index 7e1aa42..b6389258 100644 --- a/fortran/src/H5Tf.c +++ b/fortran/src/H5Tf.c @@ -1,6 +1,6 @@ /****h* H5Tf/H5Tf * PURPOSE - * This file contains C stubs for H5T Fortran APIs + * This file contains C stubs for H5T Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -23,30 +23,29 @@ #include "H5f90.h" - /****if* H5Tf/h5topen_c * NAME * h5topen_c * PURPOSE * Call H5Topen2 to open a datatype * INPUTS - * loc_id - file or group identifier - * name - name of the datatype within file or group - * namelen - name length - * tapl_id - datatype access property list identifier + * loc_id - file or group identifier + * name - name of the datatype within file or group + * namelen - name length + * tapl_id - datatype access property list identifier * OUTPUTS - * type_id - dataset identifier + * type_id - dataset identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5topen_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *tapl_id) +h5topen_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *tapl_id) /******/ { char *c_name = NULL; @@ -75,25 +74,24 @@ done: return ret_value; } - /****if* H5Tf/h5tcommit_c * NAME * h5tcommit_c * PURPOSE * Call H5Tcommit2 to commit a datatype * INPUTS - * loc_id - file or group identifier - * name - name of the datatype within file or group - * namelen - name length - * type_id - dataset identifier - * lcpl_id - Link creation property list - * tcpl_id - Datatype creation property list - * tapl_id - Datatype access property list + * loc_id - file or group identifier + * name - name of the datatype within file or group + * namelen - name length + * type_id - dataset identifier + * lcpl_id - Link creation property list + * tcpl_id - Datatype creation property list + * tapl_id - Datatype access property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * - Added passing optional parameters for version 1.8 @@ -101,7 +99,7 @@ done: * SOURCE */ int_f -nh5tcommit_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, +h5tcommit_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *lcpl_id, hid_t_f *tcpl_id, hid_t_f *tapl_id) /******/ { @@ -130,19 +128,19 @@ done: * PURPOSE * Call H5Tclose to close the datatype * INPUTS - * type_id - identifier of the datatype to be closed + * type_id - identifier of the datatype to be closed * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tclose_c ( hid_t_f *type_id ) +h5tclose_c ( hid_t_f *type_id ) /******/ { int ret_value = 0; @@ -153,28 +151,27 @@ nh5tclose_c ( hid_t_f *type_id ) return ret_value; } - /****if* H5Tf/h5tcopy_c * NAME * h5tcopy_c * PURPOSE * Call H5Tcopy to copy a datatype * INPUTS - * type_id - identifier of the datatype to be copied + * type_id - identifier of the datatype to be copied * OUTPUTS - * new_type_id - identifier of the new datatype + * new_type_id - identifier of the new datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tcopy_c ( hid_t_f *type_id , hid_t_f *new_type_id) +h5tcopy_c ( hid_t_f *type_id , hid_t_f *new_type_id) /******/ { int ret_value = 0; @@ -194,22 +191,22 @@ nh5tcopy_c ( hid_t_f *type_id , hid_t_f *new_type_id) * PURPOSE * Call H5Tequal to copy a datatype * INPUTS - * type1_id - datatype identifier - * type2_id - datatype identifier + * type1_id - datatype identifier + * type2_id - datatype identifier * OUTPUTS - * c_flag - flag; indicates if two datatypes are equal or not. + * c_flag - flag; indicates if two datatypes are equal or not. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Tuesday, February 22, 2000 + * Tuesday, February 22, 2000 * HISTORY * * SOURCE */ int_f -nh5tequal_c ( hid_t_f *type1_id , hid_t_f *type2_id, int_f *c_flag) +h5tequal_c ( hid_t_f *type1_id , hid_t_f *type2_id, int_f *c_flag) /******/ { int ret_value = -1; @@ -257,7 +254,7 @@ nh5tequal_c ( hid_t_f *type1_id , hid_t_f *type2_id, int_f *c_flag) */ int_f -nh5tget_class_c ( hid_t_f *type_id , int_f *classtype) +h5tget_class_c ( hid_t_f *type_id , int_f *classtype) /******/ { int ret_value = 0; @@ -293,24 +290,24 @@ nh5tget_class_c ( hid_t_f *type_id , int_f *classtype) * PURPOSE * Call H5Tget_order to determine byte order * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * order; possible values are: + * order; possible values are: * H5T_ORDER_LE_F (0) * H5T_ORDER_BE_F (1) * H5T_ORDER_VAX_F (2) * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tget_order_c ( hid_t_f *type_id , int_f *order) +h5tget_order_c ( hid_t_f *type_id , int_f *order) /******/ { int ret_value = -1; @@ -337,23 +334,23 @@ nh5tget_order_c ( hid_t_f *type_id , int_f *order) * PURPOSE * Call H5Tset_order to set byte order * INPUTS - * type_id - identifier of the dataspace - * order; possible values are: + * type_id - identifier of the dataspace + * order; possible values are: * H5T_ORDER_LE_F (0) * H5T_ORDER_BE_F (1) * H5T_ORDER_VAX_F (2) * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tset_order_c ( hid_t_f *type_id , int_f *order) +h5tset_order_c ( hid_t_f *type_id , int_f *order) /******/ { int ret_value = 0; @@ -378,21 +375,21 @@ nh5tset_order_c ( hid_t_f *type_id , int_f *order) * PURPOSE * Call H5Tget_size to get size of the datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * size (in bytes) + * size (in bytes) * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tget_size_c ( hid_t_f *type_id , size_t_f *size) +h5tget_size_c ( hid_t_f *type_id , size_t_f *size) /******/ { int ret_value = -1; @@ -413,21 +410,21 @@ nh5tget_size_c ( hid_t_f *type_id , size_t_f *size) * PURPOSE * Call H5Tget_size to get size of the datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * size (in bytes) + * size (in bytes) * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Saturday, August 14, 1999 + * Saturday, August 14, 1999 * HISTORY * * SOURCE */ int_f -nh5tset_size_c ( hid_t_f *type_id , size_t_f *size) +h5tset_size_c ( hid_t_f *type_id , size_t_f *size) /******/ { int ret_value = -1; @@ -449,21 +446,21 @@ nh5tset_size_c ( hid_t_f *type_id , size_t_f *size) * PURPOSE * Call H5Tget_precision to get precision of the datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * precision - number of significant bits + * precision - number of significant bits * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Tuesday, January 25, 2000 + * Tuesday, January 25, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_precision_c ( hid_t_f *type_id , size_t_f *precision) +h5tget_precision_c ( hid_t_f *type_id , size_t_f *precision) /******/ { int ret_value = -1; @@ -484,20 +481,20 @@ nh5tget_precision_c ( hid_t_f *type_id , size_t_f *precision) * PURPOSE * Call H5Tset_precision to set precision of the datatype * INPUTS - * type_id - identifier of the dataspace - * precision - number of significant bits + * type_id - identifier of the dataspace + * precision - number of significant bits * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Tuesday, January 25, 2000 + * Tuesday, January 25, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_precision_c ( hid_t_f *type_id , size_t_f *precision) +h5tset_precision_c ( hid_t_f *type_id , size_t_f *precision) /******/ { int ret_value = -1; @@ -518,23 +515,23 @@ nh5tset_precision_c ( hid_t_f *type_id , size_t_f *precision) * h5tget_offset_c * PURPOSE * Call H5Tget_offset to get bit offset of the first - * significant bit of the datatype + * significant bit of the datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * offset - bit offset of the first significant bit + * offset - bit offset of the first significant bit * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Tuesday, January 25, 2000 + * Tuesday, January 25, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_offset_c ( hid_t_f *type_id , size_t_f *offset) +h5tget_offset_c ( hid_t_f *type_id , size_t_f *offset) /******/ { int ret_value = -1; @@ -555,22 +552,22 @@ nh5tget_offset_c ( hid_t_f *type_id , size_t_f *offset) * h5tset_offset_c * PURPOSE * Call H5Tset_offset to set bit offset of the first - * significant bit of the datatype + * significant bit of the datatype * INPUTS - * type_id - identifier of the dataspace - * offset - bit offset of the first significant bit + * type_id - identifier of the dataspace + * offset - bit offset of the first significant bit * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Tuesday, January 25, 2000 + * Tuesday, January 25, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_offset_c ( hid_t_f *type_id , size_t_f *offset) +h5tset_offset_c ( hid_t_f *type_id , size_t_f *offset) /******/ { int ret_value = -1; @@ -591,25 +588,25 @@ nh5tset_offset_c ( hid_t_f *type_id , size_t_f *offset) * h5tget_pad_c * PURPOSE * Call H5Tget_pad to get the padding type of the least and - * most-significant bit padding + * most-significant bit padding * * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * lsbpad - padding type of the least significant bit - * msbpad - padding type of the least significant bit + * lsbpad - padding type of the least significant bit + * msbpad - padding type of the least significant bit * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_pad_c ( hid_t_f *type_id , int_f * lsbpad, int_f * msbpad) +h5tget_pad_c ( hid_t_f *type_id , int_f * lsbpad, int_f * msbpad) /******/ { int ret_value = -1; @@ -631,27 +628,27 @@ nh5tget_pad_c ( hid_t_f *type_id , int_f * lsbpad, int_f * msbpad) * NAME * h5tset_pad_c * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * PURPOSE * Call H5Tset_pad to set the padding type of the least and - * most-significant bit padding + * most-significant bit padding * * INPUTS - * type_id - identifier of the dataspace - * lsbpad - padding type of the least significant bit - * msbpad - padding type of the least significant bit + * type_id - identifier of the dataspace + * lsbpad - padding type of the least significant bit + * msbpad - padding type of the least significant bit * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_pad_c ( hid_t_f *type_id, int_f * lsbpad, int_f* msbpad ) +h5tset_pad_c ( hid_t_f *type_id, int_f * lsbpad, int_f* msbpad ) /******/ { int ret_value = -1; @@ -674,21 +671,21 @@ nh5tset_pad_c ( hid_t_f *type_id, int_f * lsbpad, int_f* msbpad ) * PURPOSE * Call H5Tget_sign to get sign type for an integer type * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * sign - sign type for an integer type + * sign - sign type for an integer type * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_sign_c ( hid_t_f *type_id , int_f *sign) +h5tget_sign_c ( hid_t_f *type_id , int_f *sign) /******/ { int ret_value = -1; @@ -709,20 +706,20 @@ nh5tget_sign_c ( hid_t_f *type_id , int_f *sign) * PURPOSE * Call H5Tset_sign to set sign type for an integer type * INPUTS - * type_id - identifier of the dataspace - * sign - sign type for an integer typ + * type_id - identifier of the dataspace + * sign - sign type for an integer typ * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_sign_c ( hid_t_f *type_id , int_f* sign) +h5tset_sign_c ( hid_t_f *type_id , int_f* sign) /******/ { int ret_value = -1; @@ -744,26 +741,26 @@ nh5tset_sign_c ( hid_t_f *type_id , int_f* sign) * h5tget_fields_c * PURPOSE * Call H5Tget_fields to get floating point datatype - * bit field information + * bit field information * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * epos - exponent bit-position - * esize - size of exponent in bits - * mpos - mantissa bit-position - * msize - size of mantissa in bits + * epos - exponent bit-position + * esize - size of exponent in bits + * mpos - mantissa bit-position + * msize - size of mantissa in bits * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, January 27, 2000 + * Thursday, January 27, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_fields_c ( hid_t_f *type_id , size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize) +h5tget_fields_c ( hid_t_f *type_id , size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize) /******/ { int ret_value = -1; @@ -788,25 +785,25 @@ nh5tget_fields_c ( hid_t_f *type_id , size_t_f *spos, size_t_f *epos, size_t_f* * h5tset_fields_c * PURPOSE * Call H5Tset_fields to set floating point datatype - * bit field information + * bit field information * INPUTS - * type_id - identifier of the dataspace - * epos - exponent bit-position - * esize - size of exponent in bits - * mpos - mantissa bit-position - * msize - size of mantissa in bits + * type_id - identifier of the dataspace + * epos - exponent bit-position + * esize - size of exponent in bits + * mpos - mantissa bit-position + * msize - size of mantissa in bits * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_fields_c ( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize) +h5tset_fields_c ( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize) /******/ { int ret_value = -1; @@ -832,23 +829,23 @@ nh5tset_fields_c ( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* e * h5tget_ebias_c * PURPOSE * Call H5Tget_ebias to get exponent bias of a - * floating-point type of the datatype + * floating-point type of the datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * ebias - exponent bias of a floating-point type of the datatype + * ebias - exponent bias of a floating-point type of the datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, January 27, 2000 + * Friday, January 27, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_ebias_c ( hid_t_f *type_id , size_t_f *ebias) +h5tget_ebias_c ( hid_t_f *type_id , size_t_f *ebias) /******/ { int ret_value = -1; @@ -869,22 +866,22 @@ nh5tget_ebias_c ( hid_t_f *type_id , size_t_f *ebias) * h5tset_ebias_c * PURPOSE * Call H5Tset_ebias to set exponent bias of a - * floating-point type of the datatype + * floating-point type of the datatype * INPUTS - * type_id - identifier of the dataspace - * ebias - exponent bias of a floating-point type of the datatyp + * type_id - identifier of the dataspace + * ebias - exponent bias of a floating-point type of the datatyp * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, January 27, 2000 + * Friday, January 27, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_ebias_c ( hid_t_f *type_id , size_t_f *ebias) +h5tset_ebias_c ( hid_t_f *type_id , size_t_f *ebias) /******/ { int ret_value = -1; @@ -906,23 +903,23 @@ nh5tset_ebias_c ( hid_t_f *type_id , size_t_f *ebias) * h5tget_norm_c * PURPOSE * Call H5Tget_norm to get mantissa normalization - * of a floating-point datatype + * of a floating-point datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * norm - mantissa normalization of a floating-point type + * norm - mantissa normalization of a floating-point type * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, January 27, 2000 + * Friday, January 27, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_norm_c ( hid_t_f *type_id , int_f *norm) +h5tget_norm_c ( hid_t_f *type_id , int_f *norm) /******/ { int ret_value = -1; @@ -943,22 +940,22 @@ nh5tget_norm_c ( hid_t_f *type_id , int_f *norm) * h5tset_norm_c * PURPOSE * Call H5Tset_norm to set mantissa normalization of - * floating-point type of the datatype + * floating-point type of the datatype * INPUTS - * type_id - identifier of the dataspace - * norm - mantissa normalization of a floating-point type + * type_id - identifier of the dataspace + * norm - mantissa normalization of a floating-point type * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Xiangyang Su - * Friday, January 27, 2000 + * Friday, January 27, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_norm_c ( hid_t_f *type_id , int_f *norm) +h5tset_norm_c ( hid_t_f *type_id , int_f *norm) /******/ { int ret_value = -1; @@ -980,25 +977,25 @@ nh5tset_norm_c ( hid_t_f *type_id , int_f *norm) * h5tget_inpad_c * PURPOSE * Call H5Tget_inpad to get the padding type for - * unused bits in floating-point datatypes + * unused bits in floating-point datatypes * * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * padtype - padding type for - * unused bits in floating-point datatype + * padtype - padding type for + * unused bits in floating-point datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_inpad_c ( hid_t_f *type_id , int_f * padtype) +h5tget_inpad_c ( hid_t_f *type_id , int_f * padtype) /******/ { int ret_value = -1; @@ -1018,27 +1015,27 @@ nh5tget_inpad_c ( hid_t_f *type_id , int_f * padtype) * NAME * h5tset_inpad_c * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * PURPOSE * Call H5Tset_inpad to set the padding type - * unused bits in floating-point datatype + * unused bits in floating-point datatype * * INPUTS - * type_id - identifier of the dataspace - * padtype - padding type for unused bits - * in floating-point datatypes + * type_id - identifier of the dataspace + * padtype - padding type for unused bits + * in floating-point datatypes * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_inpad_c ( hid_t_f *type_id, int_f * padtype) +h5tset_inpad_c ( hid_t_f *type_id, int_f * padtype) /******/ { int ret_value = -1; @@ -1060,24 +1057,24 @@ nh5tset_inpad_c ( hid_t_f *type_id, int_f * padtype) * h5tget_cset_c * PURPOSE * Call H5Tget_cset to get character set - * type of a string datatype + * type of a string datatype * * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * cset - character set type of a string datatype + * cset - character set type of a string datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_cset_c ( hid_t_f *type_id , int_f * cset) +h5tget_cset_c ( hid_t_f *type_id , int_f * cset) /******/ { int ret_value = -1; @@ -1097,26 +1094,26 @@ nh5tget_cset_c ( hid_t_f *type_id , int_f * cset) * NAME * h5tset_cset_c * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * PURPOSE * Call H5Tset_cset to set character set - * type of a string datatype + * type of a string datatype * * INPUTS - * type_id - identifier of the dataspace - * cset - character set type of a string datatype + * type_id - identifier of the dataspace + * cset - character set type of a string datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_cset_c ( hid_t_f *type_id, int_f * cset) +h5tset_cset_c ( hid_t_f *type_id, int_f * cset) /******/ { int ret_value = -1; @@ -1138,22 +1135,22 @@ nh5tset_cset_c ( hid_t_f *type_id, int_f * cset) * h5tget_strpad_c * PURPOSE * Call H5Tget_strpad to get string padding method - * for a string datatype + * for a string datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * strpad - string padding method for a string datatype + * strpad - string padding method for a string datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_strpad_c ( hid_t_f *type_id , int_f * strpad) +h5tget_strpad_c ( hid_t_f *type_id , int_f * strpad) /******/ { int ret_value = -1; @@ -1173,26 +1170,26 @@ nh5tget_strpad_c ( hid_t_f *type_id , int_f * strpad) * NAME * h5tset_strpad_c * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * PURPOSE * Call H5Tset_strpad to set string padding method - * for a string datatype + * for a string datatype * * INPUTS - * type_id - identifier of the dataspace - * strpad - string padding method for a string datatype + * type_id - identifier of the dataspace + * strpad - string padding method for a string datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_strpad_c ( hid_t_f *type_id, int_f * strpad) +h5tset_strpad_c ( hid_t_f *type_id, int_f * strpad) /******/ { int ret_value = -1; @@ -1214,23 +1211,23 @@ nh5tset_strpad_c ( hid_t_f *type_id, int_f * strpad) * h5tget_nmembers_c * PURPOSE * Call H5Tget_nmembers to get number of fields - * in a compound datatype + * in a compound datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * num_members - number of fields in a compound datatype + * num_members - number of fields in a compound datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_nmembers_c ( hid_t_f *type_id , int_f * num_members) +h5tget_nmembers_c ( hid_t_f *type_id , int_f * num_members) /******/ { int ret_value = -1; @@ -1249,24 +1246,24 @@ nh5tget_nmembers_c ( hid_t_f *type_id , int_f * num_members) * h5tget_member_name_c * PURPOSE * Call H5Tget_member_name to get name - * of a compound datatype + * of a compound datatype * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * member_name - name of a field of a compound datatype + * member_name - name of a field of a compound datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY - * Elena Pourmal - * Added namelen parameter to return length of the name to Fortran user + * Elena Pourmal + * Added namelen parameter to return length of the name to Fortran user * SOURCE */ int_f -nh5tget_member_name_c ( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *namelen) +h5tget_member_name_c ( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *namelen) /******/ { int ret_value = -1; @@ -1290,15 +1287,15 @@ nh5tget_member_name_c ( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *n * h5tget_member_index_c * PURPOSE * Call H5Tget_member_index to get an index of - * the specified datatype filed or member. + * the specified datatype filed or member. * INPUTS - * type_id - datatype identifier - * name - name of the datatype within file or group - * namelen - name length + * type_id - datatype identifier + * name - name of the datatype within file or group + * namelen - name length * OUTPUTS - * index - 0-based index + * index - 0-based index * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Thursday, September 26, 2002 @@ -1307,7 +1304,7 @@ nh5tget_member_name_c ( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *n * SOURCE */ int_f -nh5tget_member_index_c (hid_t_f *type_id, _fcd name, int_f *namelen, int_f *idx) +h5tget_member_index_c (hid_t_f *type_id, _fcd name, int_f *namelen, int_f *idx) /******/ { int ret_value = -1; @@ -1341,26 +1338,26 @@ DONE: * h5tget_member_offset_c * PURPOSE * Call H5Tget_member_offset to get byte offset of the - * beginning of a field within a compound datatype with - * respect to the beginning of the compound data type datum + * beginning of a field within a compound datatype with + * respect to the beginning of the compound data type datum * INPUTS - * type_id - identifier of the dataspace - * member_no - Number of the field whose offset is requested + * type_id - identifier of the dataspace + * member_no - Number of the field whose offset is requested * OUTPUTS - * offset - byte offset of the the beginning of the field of - * a compound datatype + * offset - byte offset of the the beginning of the field of + * a compound datatype * RETURNS - * always 0 + * always 0 * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_member_offset_c ( hid_t_f *type_id ,int_f* member_no, size_t_f * offset) +h5tget_member_offset_c ( hid_t_f *type_id ,int_f* member_no, size_t_f * offset) /******/ { int ret_value = -1; @@ -1377,23 +1374,23 @@ nh5tget_member_offset_c ( hid_t_f *type_id ,int_f* member_no, size_t_f * offset) * h5tget_array_dims_c * PURPOSE * Call H5Tget_array_dims2 to get - * dimensions of array datatype + * dimensions of array datatype * INPUTS - * type_id - identifier of the array datatype + * type_id - identifier of the array datatype * OUTPUTS - * dims - dimensions(sizes of dimensions) of the array + * dims - dimensions(sizes of dimensions) of the array * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, November 16, 2000 + * Thursday, November 16, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_array_dims_c ( hid_t_f *type_id , hsize_t_f * dims) +h5tget_array_dims_c ( hid_t_f *type_id , hsize_t_f * dims) /******/ { hsize_t c_dims[H5S_MAX_RANK]; @@ -1420,23 +1417,23 @@ DONE: * h5tget_array_ndims_c * PURPOSE * Call H5Tget_array_ndims to get number - * of dimensions of array datatype + * of dimensions of array datatype * INPUTS - * type_id - identifier of the array datatype + * type_id - identifier of the array datatype * OUTPUTS - * ndims - number of dimensions of the array + * ndims - number of dimensions of the array * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, November 16, 2000 + * Thursday, November 16, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_array_ndims_c ( hid_t_f *type_id , int_f * ndims) +h5tget_array_ndims_c ( hid_t_f *type_id , int_f * ndims) /******/ { int ret_value = -1; @@ -1457,23 +1454,23 @@ nh5tget_array_ndims_c ( hid_t_f *type_id , int_f * ndims) * h5tget_super_c * PURPOSE * Call H5Tget_super to get base datatype from which - * datatype was derived + * datatype was derived * INPUTS - * type_id - identifier of the array datatype + * type_id - identifier of the array datatype * OUTPUTS - * base_type_id - base datatype identifier + * base_type_id - base datatype identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Thursday, November 16, 2000 + * Thursday, November 16, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_super_c ( hid_t_f *type_id , hid_t_f *base_type_id) +h5tget_super_c ( hid_t_f *type_id , hid_t_f *base_type_id) /******/ { int ret_value = -1; @@ -1495,14 +1492,14 @@ nh5tget_super_c ( hid_t_f *type_id , hid_t_f *base_type_id) * h5tget_member_type_c * PURPOSE * Call H5Tget_member_type to get the identifier of a copy of - * the datatype of the field + * the datatype of the field * INPUTS - * type_id - identifier of the datatype - * field_idx - Field index (0-based) of the field type to retrieve + * type_id - identifier of the datatype + * field_idx - Field index (0-based) of the field type to retrieve * OUTPUTS - * datatype - identifier of a copy of the datatype of the field + * datatype - identifier of a copy of the datatype of the field * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU * Thursday, February 3, 2000 @@ -1512,7 +1509,7 @@ nh5tget_super_c ( hid_t_f *type_id , hid_t_f *base_type_id) */ int_f -nh5tget_member_type_c ( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype) +h5tget_member_type_c ( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype) /******/ { int ret_value = -1; @@ -1531,10 +1528,10 @@ nh5tget_member_type_c ( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype) * PURPOSE * Call H5Tcreate to create a datatype * INPUTS - * cls - class type - * size - size of the class memeber + * cls - class type + * size - size of the class memeber * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Thursday, February 17, 2000 @@ -1544,7 +1541,7 @@ nh5tget_member_type_c ( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype) */ int_f -nh5tcreate_c(int_f *cls, size_t_f *size, hid_t_f *type_id) +h5tcreate_c(int_f *cls, size_t_f *size, hid_t_f *type_id) /******/ { int ret_value = -1; @@ -1583,7 +1580,7 @@ nh5tcreate_c(int_f *cls, size_t_f *size, hid_t_f *type_id) */ int_f -nh5tinsert_c(hid_t_f *type_id, _fcd name, int_f* namelen, size_t_f *offset, hid_t_f * field_id) +h5tinsert_c(hid_t_f *type_id, _fcd name, int_f* namelen, size_t_f *offset, hid_t_f * field_id) /******/ { int ret_value = -1; @@ -1622,7 +1619,7 @@ nh5tinsert_c(hid_t_f *type_id, _fcd name, int_f* namelen, size_t_f *offset, hid_ */ int_f -nh5tpack_c(hid_t_f * type_id) +h5tpack_c(hid_t_f * type_id) /******/ { int ret_value = -1; @@ -1643,12 +1640,12 @@ nh5tpack_c(hid_t_f * type_id) * PURPOSE * Call H5Tarray_create2 to create array datatype * INPUTS - * base_id - identifier of array base datatype - * rank - array's rank - * dims - Size of new member array - * type_id - identifier of the array datatype + * base_id - identifier of array base datatype + * rank - array's rank + * dims - Size of new member array + * type_id - identifier of the array datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Thursday, November 16, 2000 @@ -1657,7 +1654,7 @@ nh5tpack_c(hid_t_f * type_id) * SOURCE */ int_f -nh5tarray_create_c(hid_t_f * base_id, int_f *rank, hsize_t_f* dims, hid_t_f* type_id) +h5tarray_create_c(hid_t_f * base_id, int_f *rank, hsize_t_f* dims, hid_t_f* type_id) /******/ { hsize_t c_dims[H5S_MAX_RANK]; @@ -1692,7 +1689,7 @@ DONE: * parent_id - Datatype identifier for the base datatype * OUTPUTS * new_type_id - datatype identifier for the new - * enumeration datatype + * enumeration datatype * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -1704,7 +1701,7 @@ DONE: */ int_f -nh5tenum_create_c ( hid_t_f *parent_id , hid_t_f *new_type_id) +h5tenum_create_c ( hid_t_f *parent_id , hid_t_f *new_type_id) /******/ { int ret_value = 0; @@ -1740,7 +1737,7 @@ nh5tenum_create_c ( hid_t_f *parent_id , hid_t_f *new_type_id) */ int_f -nh5tenum_insert_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) +h5tenum_insert_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) /******/ { int ret_value = -1; @@ -1767,24 +1764,24 @@ nh5tenum_insert_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) * h5tenum_nameof_c * PURPOSE * Call H5Tenum_nameof to find the symbol name that corresponds to - * the specified value of the enumeration datatype type + * the specified value of the enumeration datatype type * INPUTS - * type_id - identifier of the datatype - * namelen - length of the name - * value - value of the enumeration datatype - * Output: name - Name of the enumeration datatype + * type_id - identifier of the datatype + * namelen - length of the name + * value - value of the enumeration datatype + * Output: name - Name of the enumeration datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY * * SOURCE */ int_f -nh5tenum_nameof_c(hid_t_f *type_id, int_f* value, _fcd name, size_t_f* namelen) +h5tenum_nameof_c(hid_t_f *type_id, int_f* value, _fcd name, size_t_f* namelen) /******/ { int ret_value = -1; @@ -1811,24 +1808,24 @@ nh5tenum_nameof_c(hid_t_f *type_id, int_f* value, _fcd name, size_t_f* namelen) * h5tenum_valueof_c * PURPOSE * Call H5Tenum_valueof to find the value of that corresponds to - * the specified name of the enumeration datatype type + * the specified name of the enumeration datatype type * INPUTS - * type_id - identifier of the datatype - * name - Name of the enumeration datatype - * namelen - length of name - * Output: value - value of the enumeration datatype + * type_id - identifier of the datatype + * name - Name of the enumeration datatype + * namelen - length of name + * Output: value - value of the enumeration datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY * * SOURCE */ int_f -nh5tenum_valueof_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) +h5tenum_valueof_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) /******/ { int ret_value = -1; @@ -1851,23 +1848,23 @@ nh5tenum_valueof_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value) * h5tget_member_value_c * PURPOSE * Call H5Tget_member_value to get the value of an - * enumeration datatype member + * enumeration datatype member * INPUTS - * type_id - identifier of the datatype - * member_no - Number of the enumeration datatype member. - * Output: value - value of the enumeration datatype + * type_id - identifier of the datatype + * member_no - Number of the enumeration datatype member. + * Output: value - value of the enumeration datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Thursday, February 3, 2000 + * Thursday, February 3, 2000 * HISTORY * * SOURCE */ int_f -nh5tget_member_value_c(hid_t_f *type_id, int_f* member_no, int_f* value) +h5tget_member_value_c(hid_t_f *type_id, int_f* member_no, int_f* value) /******/ { int ret_value = -1; @@ -1886,25 +1883,25 @@ nh5tget_member_value_c(hid_t_f *type_id, int_f* member_no, int_f* value) * NAME * h5tset_tag_c * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * PURPOSE * Call H5Tset_tag to set an opaque datatype tag * INPUTS - * type_id - identifier of the dataspace - * tag - Unique ASCII string with which the opaque - * datatype is to be tagged - * namelen - length of tag + * type_id - identifier of the dataspace + * tag - Unique ASCII string with which the opaque + * datatype is to be tagged + * namelen - length of tag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU - * Wednesday, January 26, 2000 + * Wednesday, January 26, 2000 * HISTORY * * SOURCE */ int_f -nh5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen) +h5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen) /******/ { int ret_value = -1; @@ -1929,11 +1926,11 @@ nh5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen) * INPUTS * type_id - identifier of the datatype * OUTPUTS - * tag - Unique ASCII string with which the opaque - * datatype is to be tagged - * taglen - length of tag + * tag - Unique ASCII string with which the opaque + * datatype is to be tagged + * taglen - length of tag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * XIANGYANG SU * Wednesday, January 26, 2000 @@ -1942,7 +1939,7 @@ nh5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen) * SOURCE */ int_f -nh5tget_tag_c(hid_t_f* type_id, _fcd tag, size_t_f* tag_size, int_f* taglen) +h5tget_tag_c(hid_t_f* type_id, _fcd tag, size_t_f* tag_size, int_f* taglen) /******/ { int ret_value = -1; @@ -1965,20 +1962,20 @@ nh5tget_tag_c(hid_t_f* type_id, _fcd tag, size_t_f* tag_size, int_f* taglen) * PURPOSE * Call H5Tvlen_create to create VL dtatype * INPUTS - * type_id - identifier of the base datatype + * type_id - identifier of the base datatype * OUTPUTS - * vltype_id - identifier of the VL datatype + * vltype_id - identifier of the VL datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, October 23, 2002 + * Wednesday, October 23, 2002 * HISTORY * * SOURCE */ int_f -nh5tvlen_create_c(hid_t_f* type_id, hid_t_f *vltype_id) +h5tvlen_create_c(hid_t_f* type_id, hid_t_f *vltype_id) /******/ { int ret_value = -1; @@ -1997,24 +1994,24 @@ nh5tvlen_create_c(hid_t_f* type_id, hid_t_f *vltype_id) * h5tis_variable_str_c * PURPOSE * Call H5Tis_variable_str to detrmine if the datatype - * is a variable string. + * is a variable string. * INPUTS - * type_id - identifier of the dataspace + * type_id - identifier of the dataspace * OUTPUTS - * flag - 0 if not VL str, 1 if is not - * and negative on failure. + * flag - 0 if not VL str, 1 if is not + * and negative on failure. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12 , 2003 + * Wednesday, March 12 , 2003 * HISTORY * * SOURCE */ int_f -nh5tis_variable_str_c ( hid_t_f *type_id , int_f *flag ) +h5tis_variable_str_c ( hid_t_f *type_id , int_f *flag ) /******/ { int ret_value = 0; @@ -2034,13 +2031,13 @@ nh5tis_variable_str_c ( hid_t_f *type_id , int_f *flag ) * Call H5Tget_member_class to detrmine ithe class of the compound * datatype member * INPUTS - * type_id - identifier of the dataspace - * member_no - member's index + * type_id - identifier of the dataspace + * member_no - member's index * OUTPUTS - * class - member's class - * and negative on failure. + * class - member's class + * and negative on failure. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal * Wednesday, April 6, 2005 @@ -2050,7 +2047,7 @@ nh5tis_variable_str_c ( hid_t_f *type_id , int_f *flag ) */ int_f -nh5tget_member_class_c ( hid_t_f *type_id , int_f *member_no, int_f *cls ) +h5tget_member_class_c ( hid_t_f *type_id , int_f *member_no, int_f *cls ) /******/ { int ret_value = 0; @@ -2073,12 +2070,12 @@ nh5tget_member_class_c ( hid_t_f *type_id , int_f *member_no, int_f *cls ) * PURPOSE * Call H5Tcommit_anon * INPUTS - * loc_id - file or group identifier - * dtype_id - dataset identifier - * tcpl_id - Datatype creation property list - * tapl_id - Datatype access property list + * loc_id - file or group identifier + * dtype_id - dataset identifier + * tcpl_id - Datatype creation property list + * tapl_id - Datatype access property list * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * February 25, 2008 @@ -2087,7 +2084,7 @@ nh5tget_member_class_c ( hid_t_f *type_id , int_f *member_no, int_f *cls ) * SOURCE */ int_f -nh5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, +h5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, hid_t_f *tcpl_id, hid_t_f *tapl_id) /******/ { @@ -2108,10 +2105,10 @@ nh5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, * h5tcommitted_c * PURPOSE * Call H5Tcommitted - * dtype_id - dataset identifier + * dtype_id - dataset identifier * RETURNS - * a positive value, for TRUE, if the datatype has been committed, - * or 0 (zero), for FALSE, if the datatype has not been committed. + * a positive value, for TRUE, if the datatype has been committed, + * or 0 (zero), for FALSE, if the datatype has not been committed. * Otherwise returns a negative value. * AUTHOR * M. Scot Breitenfeld @@ -2121,7 +2118,7 @@ nh5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, * SOURCE */ int_f -nh5tcommitted_c(hid_t_f *dtype_id) +h5tcommitted_c(hid_t_f *dtype_id) /******/ { int_f ret_value; @@ -2144,10 +2141,10 @@ nh5tcommitted_c(hid_t_f *dtype_id) * buf - Buffer for the data space object to be decoded. * OUTPUTS * - * obj_id - Object_id (non-negative) + * obj_id - Object_id (non-negative) * * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * April 9, 2008 @@ -2157,7 +2154,7 @@ nh5tcommitted_c(hid_t_f *dtype_id) */ int_f -nh5tdecode_c ( _fcd buf, hid_t_f *obj_id ) +h5tdecode_c ( _fcd buf, hid_t_f *obj_id ) /******/ { int ret_value = -1; @@ -2187,11 +2184,11 @@ nh5tdecode_c ( _fcd buf, hid_t_f *obj_id ) * Call H5Tencode * INPUTS * - * obj_id - Identifier of the object to be encoded. + * obj_id - Identifier of the object to be encoded. * buf - Buffer for the object to be encoded into. - * nalloc - The size of the allocated buffer. + * nalloc - The size of the allocated buffer. * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * April 9, 2008 @@ -2201,7 +2198,7 @@ nh5tdecode_c ( _fcd buf, hid_t_f *obj_id ) */ int_f -nh5tencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) +h5tencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) /******/ { int ret_value = -1; @@ -2256,11 +2253,11 @@ nh5tencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) * PURPOSE * Call H5Tget_create_plist * INPUTS - * dtype_id - Datatype identifier + * dtype_id - Datatype identifier * OUTPUTS - * dtpl_id - Datatype property list identifier + * dtpl_id - Datatype property list identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * April 9, 2008 @@ -2270,7 +2267,7 @@ nh5tencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ) */ int_f -nh5tget_create_plist_c ( hid_t_f *dtype_id, hid_t_f *dtpl_id) +h5tget_create_plist_c ( hid_t_f *dtype_id, hid_t_f *dtpl_id) /******/ { int_f ret_value=-1; /* Return value */ @@ -2289,12 +2286,12 @@ nh5tget_create_plist_c ( hid_t_f *dtype_id, hid_t_f *dtpl_id) * Call H5Tcompiler_conv * INPUTS * - * src_id - Identifier for the source datatype. - * dst_id - Identifier for the destination datatype. + * src_id - Identifier for the source datatype. + * dst_id - Identifier for the destination datatype. * OUTPUTS - * c_flag - flag; TRUE for compiler conversion, FALSE for library conversion + * c_flag - flag; TRUE for compiler conversion, FALSE for library conversion * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M.Scot Breitenfeld * April 9, 2008 @@ -2304,7 +2301,7 @@ nh5tget_create_plist_c ( hid_t_f *dtype_id, hid_t_f *dtpl_id) */ int_f -nh5tcompiler_conv_c ( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag) +h5tcompiler_conv_c ( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag) /******/ { int ret_value = -1; @@ -2323,12 +2320,12 @@ nh5tcompiler_conv_c ( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag) * Call H5Tget_native_type * INPUTS * - * dtype_id - Datatype identifier for the dataset datatype. - * direction - Direction of search. + * dtype_id - Datatype identifier for the dataset datatype. + * direction - Direction of search. * OUTPUTS - * native_dtype_id - The native datatype identifier for the specified dataset datatype + * native_dtype_id - The native datatype identifier for the specified dataset datatype * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * M. Scot Breitenfeld * June 18, 2008 @@ -2338,7 +2335,7 @@ nh5tcompiler_conv_c ( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag) */ int_f -nh5tget_native_type_c(hid_t_f *dtype_id, int_f *direction, hid_t_f *native_dtype_id) +h5tget_native_type_c(hid_t_f *dtype_id, int_f *direction, hid_t_f *native_dtype_id) /******/ { int ret_value = -1; diff --git a/fortran/src/H5Tff.F90 b/fortran/src/H5Tff.F90 new file mode 100644 index 0000000..6b8f896 --- /dev/null +++ b/fortran/src/H5Tff.F90 @@ -0,0 +1,3082 @@ +!****h* ROBODoc/H5T +! +! NAME +! MODULE H5T +! +! PURPOSE +! This file contains Fortran interfaces for H5T functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new function here then you MUST add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5T + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR, C_NULL_PTR + USE H5GLOBAL + IMPLICIT NONE + +!****t* H5T/hvl_t +! Fortran2003 Derived Type: + TYPE hvl_t + INTEGER(size_t) :: len ! Length of VL data (in base type units) + TYPE(C_PTR) :: p ! Pointer to VL data + END TYPE hvl_t + +!***** + + INTERFACE h5tenum_insert_f + MODULE PROCEDURE h5tenum_insert_f03 + MODULE PROCEDURE h5tenum_insert_f90 + END INTERFACE + +CONTAINS + +! +!****s* H5T/h5topen_f +! +! NAME +! h5topen_f +! +! PURPOSE +! Opens named datatype. +! +! INPUTS +! loc_id - location identifier +! name - a datatype name +! OUTPUTS +! type_id - datatype identifier +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! tapl_id - datatype access property list identifier. +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! Added optional parameter 'tapl_id' for compatability +! with H5Topen2. April 9, 2009. +! +! SOURCE + SUBROUTINE h5topen_f(loc_id, name, type_id, hdferr, tapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER(HID_T), INTENT(OUT) :: type_id + INTEGER, INTENT(OUT) :: hdferr + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id +!***** + INTEGER :: namelen ! Name length + INTEGER(HID_T) :: tapl_id_default + + INTERFACE + INTEGER FUNCTION h5topen_c(loc_id, name, namelen, type_id, tapl_id_default) BIND(C,NAME='h5topen_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(OUT) :: type_id + INTEGER(HID_T) :: tapl_id_default + END FUNCTION h5topen_c + END INTERFACE + + namelen = LEN(name) + + tapl_id_default = H5P_DEFAULT_F + IF(PRESENT(tapl_id)) tapl_id_default = tapl_id + + hdferr = h5topen_c(loc_id, name, namelen, type_id, tapl_id_default) + END SUBROUTINE h5topen_f +! +!****s* H5T/h5tcommit_f +! +! NAME +! h5tcommit_f +! +! PURPOSE +! Commits a transient datatype to a file, creating a +! new named datatype. +! +! INPUTS +! loc_id - location identifier +! name - name of the datatype to be stored +! at the specified location +! type_id - identifier of a datatype to be stored +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! lcpl_id - Link creation property list +! tcpl_id - Datatype creation property list +! tapl_id - Datatype access property list +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! - Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! - Added optional parameters introduced in version 1.8 +! M. Scot Breitenfeld +! +! SOURCE + SUBROUTINE h5tcommit_f(loc_id, name, type_id, hdferr, & + lcpl_id, tcpl_id, tapl_id ) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier + CHARACTER(LEN=*), INTENT(IN) :: name + ! Datatype name within file or group + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id ! Datatype creation property list + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! Datatype access property list +!***** + + INTEGER :: namelen ! Name length + + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: tcpl_id_default + INTEGER(HID_T) :: tapl_id_default + + INTERFACE + INTEGER FUNCTION h5tcommit_c(loc_id, name, namelen, type_id, & + lcpl_id_default, tcpl_id_default, tapl_id_default ) BIND(C,NAME='h5tcommit_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T) :: lcpl_id_default + INTEGER(HID_T) :: tcpl_id_default + INTEGER(HID_T) :: tapl_id_default + END FUNCTION h5tcommit_c + END INTERFACE + + lcpl_id_default = H5P_DEFAULT_F + tcpl_id_default = H5P_DEFAULT_F + tapl_id_default = H5P_DEFAULT_F + + IF (PRESENT(lcpl_id)) lcpl_id_default = lcpl_id + IF (PRESENT(tcpl_id)) tcpl_id_default = tcpl_id + IF (PRESENT(tapl_id)) tapl_id_default = tapl_id + + namelen = LEN(name) + + hdferr = h5tcommit_c(loc_id, name, namelen, type_id, & + lcpl_id_default, tcpl_id_default, tapl_id_default ) + + END SUBROUTINE h5tcommit_f +! +!****s* H5T/h5tcopy_f +! +! NAME +! h5tcopy_f +! +! PURPOSE +! Creates a copy of exisiting datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! new_type_id - identifier of datatype's copy +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tcopy_f(type_id, new_type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: new_type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tcopy_c(type_id, new_type_id) BIND(C,NAME='h5tcopy_c') + IMPORT :: HID_T + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: new_type_id + END FUNCTION h5tcopy_c + END INTERFACE + + hdferr = h5tcopy_c(type_id, new_type_id) + END SUBROUTINE h5tcopy_f +! +!****s* H5T/h5tequal_f +! +! NAME +! h5tequal_f +! +! PURPOSE +! Determines whether two datatype identifiers refer +! to the same datatype. +! +! INPUTS +! type1_id - datatype identifier +! type2_id - datatype identifier +! OUTPUTS +! flag - TRUE/FALSE flag to indicate +! if two datatypes are equal +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tequal_f(type1_id, type2_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type1_id + INTEGER(HID_T), INTENT(IN) :: type2_id + LOGICAL, INTENT(OUT) :: flag + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: c_flag + INTERFACE + INTEGER FUNCTION h5tequal_c(type1_id, type2_id, c_flag) BIND(C,NAME='h5tequal_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type1_id + INTEGER(HID_T), INTENT(IN) :: type2_id + INTEGER :: c_flag + END FUNCTION h5tequal_c + END INTERFACE + + flag = .FALSE. + hdferr = h5tequal_c(type1_id, type2_id, c_flag) + IF(c_flag .GT. 0) flag = .TRUE. + END SUBROUTINE h5tequal_f +! +!****s* H5T/h5tclose_f +! +! NAME +! h5tclose_f +! +! PURPOSE +! Releases a datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tclose_f(type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tclose_c(type_id) BIND(C,NAME='h5tclose_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + END FUNCTION h5tclose_c + END INTERFACE + + hdferr = h5tclose_c(type_id) + END SUBROUTINE h5tclose_f +! +!****s* H5T/h5tget_class_f +! +! NAME +! h5tget_class_f +! +! PURPOSE +! Returns the datatype class identifier. +! +! INPUTS +! type_id - Datatype identifier +! OUTPUTS +! class - Class, possible values are: +! H5T_NO_CLASS_F (-1) +! H5T_INTEGER_F (0) +! H5T_FLOAT_F (1) +! H5T_TIME_F (2) +! H5T_STRING_F (3) +! H5T_BITFIELD_F (4) +! H5T_OPAQUE_F (5) +! H5T_COMPOUND_F (6) +! H5T_REFERENCE_F (7) +! H5T_ENUM_F (8) +! H5T_VLEN_F (9) +! H5T_ARRAY_F (10) +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_class_f(type_id, class, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: class + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_class_c(type_id, class) BIND(C,NAME='h5tget_class_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: class + END FUNCTION h5tget_class_c + END INTERFACE + + hdferr = h5tget_class_c(type_id, class) + END SUBROUTINE h5tget_class_f +! +!****s* H5T/h5tget_size_f +! +! NAME +! h5tget_size_f +! +! PURPOSE +! Returns the size of a datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! size - datatype size +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_size_f(type_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER(SIZE_T), INTENT(OUT) :: size ! Datatype size + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5tget_size_c(type_id, size) BIND(C,NAME='h5tget_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: size + END FUNCTION h5tget_size_c + END INTERFACE + + hdferr = h5tget_size_c(type_id, size) + END SUBROUTINE h5tget_size_f + +! +!****s* H5T/h5tset_size_f +! +! NAME +! h5tset_size_f +! +! PURPOSE +! Sets the total size for an atomic datatype. +! +! INPUTS +! type_id - datatype identifier +! size - size of the datatype +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! +! SOURCE + SUBROUTINE h5tset_size_f(type_id, size, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER(SIZE_T), INTENT(IN) :: size ! Datatype size + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5tset_size_c(type_id, size) BIND(C,NAME='h5tset_size_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: size + END FUNCTION h5tset_size_c + END INTERFACE + + hdferr = h5tset_size_c(type_id, size) + END SUBROUTINE h5tset_size_f + +! +!****s* H5T/h5tget_order_f +! +! NAME +! h5tget_order_f +! +! PURPOSE +! Returns the byte order of an atomic datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! order - byte order for the datatype, possible +! values are: +! H5T_ORDER_LE_F +! H5T_ORDER_BE_F +! H5T_ORDER_VAX_F (not implemented yet) +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_order_f(type_id, order, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER, INTENT(OUT) :: order + ! Datatype byte order, possible values are: + ! H5T_ORDER_LE_F + ! H5T_ORDER_BE_F + ! H5T_ORDER_VAX_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5tget_order_c(type_id, order) BIND(C,NAME='h5tget_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: order + END FUNCTION h5tget_order_c + END INTERFACE + + hdferr = h5tget_order_c(type_id, order) + END SUBROUTINE h5tget_order_f +! +!****s* H5T/h5tset_order_f +! +! NAME +! h5tset_order_f +! +! PURPOSE +! Sets the byte ordering of an atomic datatype. +! +! INPUTS +! type_id - datatype identifier +! order - datatype byte order Possible values are: +! H5T_ORDER_LE_F +! H5T_ORDER_BE_F +! H5T_ORDER_VAX_F (not implemented yet) +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tset_order_f(type_id, order, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier + INTEGER, INTENT(IN) :: order ! Datatype byte order, possible values + ! are: + ! H5T_ORDER_LE_F + ! H5T_ORDER_BE_F + ! H5T_ORDER_VAX_F + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5tset_order_c(type_id, order) BIND(C,NAME='h5tset_order_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: order + END FUNCTION h5tset_order_c + END INTERFACE + + hdferr = h5tset_order_c(type_id, order) + END SUBROUTINE h5tset_order_f + +! +!****s* H5T/h5tget_precision_f +! +! NAME +! h5tget_precision_f +! +! PURPOSE +! Returns the precision of an atomic datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! precision - precision of the datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_precision_f(type_id, PRECISION, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: precision + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_precision_c(type_id, PRECISION) BIND(C,NAME='h5tget_precision_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: PRECISION + END FUNCTION h5tget_precision_c + END INTERFACE + + hdferr = h5tget_precision_c(type_id, PRECISION) + END SUBROUTINE h5tget_precision_f + +! +!****s* H5T/h5tset_precision_f +! +! NAME +! h5tset_precision_f +! +! PURPOSE +! Sets the precision of an atomic datatype. +! +! INPUTS +! type_id - datatype identifier +! precision - datatype precision +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tset_precision_f(type_id, PRECISION, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: PRECISION + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_precision_c (type_id, PRECISION) BIND(C,NAME='h5tset_precision_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: PRECISION + END FUNCTION h5tset_precision_c + END INTERFACE + + hdferr = h5tset_precision_c(type_id, PRECISION) + END SUBROUTINE h5tset_precision_f + +! +!****s* H5T/h5tget_offset_f +! +! NAME +! h5tget_offset_f +! +! PURPOSE +! Retrieves the bit offset of the first significant bit. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! offset - offset value +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_offset_f(type_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: offset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_offset_c(type_id, offset) BIND(C,NAME='h5tget_offset_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: offset + END FUNCTION h5tget_offset_c + END INTERFACE + + hdferr = h5tget_offset_c(type_id, offset) + END SUBROUTINE h5tget_offset_f + +! +!****s* H5T/h5tset_offset_f +! +! NAME +! h5tset_offset_f +! +! PURPOSE +! Sets the bit offset of the first significant bit. +! +! INPUTS +! type_id - datatype identifier +! offset - offset value +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tset_offset_f(type_id, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: offset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_offset_c(type_id, offset) BIND(C,NAME='h5tset_offset_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: offset + END FUNCTION h5tset_offset_c + END INTERFACE + + hdferr = h5tset_offset_c(type_id, offset) + END SUBROUTINE h5tset_offset_f + +! +!****s* H5T/h5tget_pad_f +! +! NAME +! h5tget_pad_f +! +! PURPOSE +! Retrieves the padding type of the least and +! most -significant bit padding. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! lsbpad - least-significant bit padding type +! msbpad - most-significant bit padding type +! Possible values of padding type are: +! H5T_PAD_ERROR_F +! H5T_PAD_ZERO_F +! H5T_PAD_ONE_F +! H5T_PAD_BACKGROUND_F +! H5T_PAD_NPAD_F +! hdferr - Returns 0 if successful and -1 if fails + +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_pad_f(type_id, lsbpad, msbpad, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: lsbpad + INTEGER, INTENT(OUT) :: msbpad + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_pad_c(type_id, lsbpad, msbpad) BIND(C,NAME='h5tget_pad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: lsbpad + INTEGER, INTENT(OUT) :: msbpad + END FUNCTION h5tget_pad_c + END INTERFACE + + hdferr = h5tget_pad_c(type_id, lsbpad, msbpad) + END SUBROUTINE h5tget_pad_f + +! +!****s* H5T/h5tset_pad_f +! +! NAME +! h5tset_pad_f +! +! PURPOSE +! Sets the least and most-significant bits padding types. +! +! INPUTS +! type_id - datatype identifier +! lsbpad - least-significant bit padding type +! msbpad - most-significant bit padding type +! Possible values of padding type are: +! H5T_PAD_ERROR_F = -1 +! H5T_PAD_ZERO_F = 0 +! H5T_PAD_ONE_F = 1 +! H5T_PAD_BACKGROUND_F = 2 +! H5T_PAD_NPAD_F = 3 +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_pad_f(type_id, lsbpad, msbpad, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: lsbpad + INTEGER, INTENT(IN) :: msbpad + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_pad_c(type_id, lsbpad, msbpad) BIND(C,NAME='h5tset_pad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: lsbpad + INTEGER, INTENT(IN) :: msbpad + END FUNCTION h5tset_pad_c + END INTERFACE + + hdferr = h5tset_pad_c(type_id, lsbpad, msbpad) + END SUBROUTINE h5tset_pad_f + +! +!****s* H5T/h5tget_sign_f +! +! NAME +! h5tget_sign_f +! +! PURPOSE +! Retrieves the sign type for an integer type. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! sign - sign type +! Possible values are: +! - Unsigned integer type +! H5T_SGN_NONE_F = 0 +! - Two's complement signed integer type +! H5T_SGN_2_F = 1 +! - error value: H5T_SGN_ERROR_F=-1 +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_sign_f(type_id, sign, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: sign + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tget_sign_c(type_id, sign) BIND(C,NAME='h5tget_sign_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: sign + END FUNCTION h5tget_sign_c + END INTERFACE + + hdferr = h5tget_sign_c(type_id, sign) + END SUBROUTINE h5tget_sign_f + +! +!****s* H5T/h5tset_sign_f +! +! NAME +! h5tset_sign_f +! +! PURPOSE +! Sets the sign proprety for an integer type. +! +! INPUTS +! type_id - datatype identifier +! sign - sign type +! Possible values are: +! - Unsigned integer type +! H5T_SGN_NONE_F = 0 +! - Two's complement signed integer type +! H5T_SGN_2_F = 1 +! - error value: H5T_SGN_ERROR_F=-1 +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_sign_f(type_id, sign, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: sign + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_sign_c(type_id, sign) BIND(C,NAME='h5tset_sign_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: sign + END FUNCTION h5tset_sign_c + END INTERFACE + + hdferr = h5tset_sign_c(type_id, sign) + END SUBROUTINE h5tset_sign_f + +! +!****s* H5T/h5tget_fields_f +! +! NAME +! h5tget_fields_f +! +! PURPOSE +! Retrieves floating point datatype bit field information. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! spos - sign bit-position +! epos - exponent bit-position +! esize - size of exponent in bits +! mpos - mantissa position +! msize - size of mantissa in bits +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: spos + INTEGER(SIZE_T), INTENT(OUT) :: epos + INTEGER(SIZE_T), INTENT(OUT) :: esize + INTEGER(SIZE_T), INTENT(OUT) :: mpos + INTEGER(SIZE_T), INTENT(OUT) :: msize + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tget_fields_c(type_id, spos, epos, esize, mpos, msize) & + BIND(C,NAME='h5tget_fields_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: spos + INTEGER(SIZE_T), INTENT(OUT) :: epos + INTEGER(SIZE_T), INTENT(OUT) :: esize + INTEGER(SIZE_T), INTENT(OUT) :: mpos + INTEGER(SIZE_T), INTENT(OUT) :: msize + END FUNCTION h5tget_fields_c + END INTERFACE + + hdferr = h5tget_fields_c(type_id, spos, epos, esize, mpos, msize) + END SUBROUTINE h5tget_fields_f + +! +!****s* H5T/h5tset_fields_f +! +! NAME +! h5tset_fields_f +! +! PURPOSE +! Sets locations and sizes of floating point bit fields. +! +! INPUTS +! type_id - datatype identifier +! spos - sign bit-position +! epos - exponent bit-position +! esize - size of exponent in bits +! mpos - mantissa position +! msize - size of mantissa in bits +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: spos + INTEGER(SIZE_T), INTENT(IN) :: epos + INTEGER(SIZE_T), INTENT(IN) :: esize + INTEGER(SIZE_T), INTENT(IN) :: mpos + INTEGER(SIZE_T), INTENT(IN) :: msize + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tset_fields_c(type_id, spos, epos, esize, mpos, msize) & + BIND(C,NAME='h5tset_fields_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: spos + INTEGER(SIZE_T), INTENT(IN) :: epos + INTEGER(SIZE_T), INTENT(IN) :: esize + INTEGER(SIZE_T), INTENT(IN) :: mpos + INTEGER(SIZE_T), INTENT(IN) :: msize + END FUNCTION h5tset_fields_c + END INTERFACE + + hdferr = h5tset_fields_c(type_id, spos, epos, esize, mpos, msize) + END SUBROUTINE h5tset_fields_f + +! +!****s* H5T/h5tget_ebias_f +! +! NAME +! h5tget_ebias_f +! +! PURPOSE +! Retrieves the exponent bias of a floating-point type. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! ebias - datatype exponent bias +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_ebias_f(type_id, ebias, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: ebias + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tget_ebias_c(type_id, ebias) BIND(C,NAME='h5tget_ebias_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(OUT) :: ebias + END FUNCTION h5tget_ebias_c + END INTERFACE + + hdferr = h5tget_ebias_c(type_id, ebias) + END SUBROUTINE h5tget_ebias_f + +! +!****s* H5T/h5tset_ebias_f +! +! NAME +! h5tset_ebias_f +! +! PURPOSE +! Sets the exponent bias of a floating-point type. +! +! INPUTS +! type_id - datatype identifier +! ebias - datatype exponent bias +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_ebias_f(type_id, ebias, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: ebias + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_ebias_c(type_id, ebias) BIND(C,NAME='h5tset_ebias_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(SIZE_T), INTENT(IN) :: ebias + END FUNCTION h5tset_ebias_c + END INTERFACE + + hdferr = h5tset_ebias_c(type_id, ebias) + END SUBROUTINE h5tset_ebias_f + +! +!****s* H5T/h5tget_norm_f +! +! NAME +! h5tget_norm_f +! +! PURPOSE +! Retrieves mantissa normalization of a floating-point +! datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! norm - normalization types, valid values are: +! H5T_NORM_IMPLIED_F +! H5T_NORM_MSBSET_F +! H5T_NORM_NONE_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_norm_f(type_id, norm, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: norm + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tget_norm_c(type_id, norm) BIND(C,NAME='h5tget_norm_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: norm + END FUNCTION h5tget_norm_c + END INTERFACE + + hdferr = h5tget_norm_c(type_id, norm) + END SUBROUTINE h5tget_norm_f + +! +!****s* H5T/h5tset_norm_f +! +! NAME +! h5tset_norm_f +! +! PURPOSE +! Sets the mantissa normalization of a floating-point datatype. +! +! INPUTS +! type_id - datatype identifier +! norm - normalization types, valid values are: +! H5T_NORM_IMPLIED_F +! H5T_NORM_MSBSET_F +! H5T_NORM_NONE_F +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tset_norm_f(type_id, norm, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: norm + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_norm_c(type_id, norm) BIND(C,NAME='h5tset_norm_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: norm + END FUNCTION h5tset_norm_c + END INTERFACE + + hdferr = h5tset_norm_c(type_id, norm) + END SUBROUTINE h5tset_norm_f + +! +!****s* H5T/h5tget_inpad_f +! +! NAME +! h5tget_inpad_f +! +! PURPOSE +! Retrieves the internal padding type for unused bits +! in floating-point datatypes. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! padtype - padding type for unused bits +! Possible values of padding type are: +! H5T_PAD_ZERO_F +! H5T_PAD_ONE_F +! H5T_PAD_BACKGROUND_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_inpad_f(type_id, padtype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: padtype + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_inpad_c(type_id, padtype) BIND(C,NAME='h5tget_inpad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: padtype + END FUNCTION h5tget_inpad_c + END INTERFACE + + hdferr = h5tget_inpad_c(type_id, padtype) + END SUBROUTINE h5tget_inpad_f + +! +!****s* H5T/h5tset_inpad_f +! +! NAME +! h5tset_inpad_f +! +! PURPOSE +! Fills unused internal floating point bits. +! +! INPUTS +! type_id - datatype identifier +! padtype - padding type for unused bits +! Possible values of padding type are: +! H5T_PAD_ZERO_F +! H5T_PAD_ONE_F +! H5T_PAD_BACKGROUND_F +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_inpad_f(type_id, padtype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: padtype + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_inpad_c(type_id, padtype) BIND(C,NAME='h5tset_inpad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: padtype + END FUNCTION h5tset_inpad_c + END INTERFACE + + hdferr = h5tset_inpad_c(type_id, padtype) + END SUBROUTINE h5tset_inpad_f + +! +!****s* H5T/h5tget_cset_f +! +! NAME +! h5tget_cset_f +! +! PURPOSE +! Retrieves the character set type of a string datatype. +! +! INPUTS +! type_id - Datatype identifier +! OUTPUTS +! cset - Character set type of a string datatype +! Possible values are: +! H5T_CSET_ASCII_F +! H5T_CSET_UTF8_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_cset_f(type_id, cset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: cset + INTEGER, INTENT(OUT) :: hdferr ! Error code +!***** + INTERFACE + INTEGER FUNCTION h5tget_cset_c(type_id, cset) BIND(C,NAME='h5tget_cset_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: cset + END FUNCTION h5tget_cset_c + END INTERFACE + + hdferr = h5tget_cset_c(type_id, cset) + END SUBROUTINE h5tget_cset_f + +! +!****s* H5T/h5tset_cset_f +! +! NAME +! h5tset_cset_f +! +! PURPOSE +! Sets character set to be used. +! +! INPUTS +! type_id - datatype identifier +! cset - character set type of a string datatype +! Possible values are: +! H5T_CSET_ASCII_F +! H5T_CSET_UTF8_F +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_cset_f(type_id, cset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: cset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_cset_c(type_id, cset) BIND(C,NAME='h5tset_cset_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: cset + END FUNCTION h5tset_cset_c + END INTERFACE + + hdferr = h5tset_cset_c(type_id, cset) + END SUBROUTINE h5tset_cset_f +! +!****s* H5T/h5tget_strpad_f +! +! NAME +! h5tget_strpad_f +! +! PURPOSE +! Retrieves the storage mechanism for a string datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! strpad - storage method for a string datatype +! Possible values are: +! H5T_STR_NULLTERM_F, +! H5T_STR_NULLPAD_F, +! H5T_STR_SPACEPAD_F +! H5T_STR_ERROR_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_strpad_f(type_id, strpad, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: strpad + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_strpad_c(type_id, strpad) BIND(C,NAME='h5tget_strpad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: strpad + END FUNCTION h5tget_strpad_c + END INTERFACE + + hdferr = h5tget_strpad_c(type_id, strpad) + END SUBROUTINE h5tget_strpad_f + +! +!****s* H5T/h5tset_strpad_f +! +! NAME +! h5tset_strpad_f +! +! PURPOSE +! Defines the storage mechanism for character strings. +! +! INPUTS +! type_id - datatype identifier +! strpad - storage method for a string datatype +! Possible values are: +! H5T_STR_NULLTERM_F, +! H5T_STR_NULLPAD_F, +! H5T_STR_SPACEPAD_F, +! H5T_STR_ERROR_F. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_strpad_f(type_id, strpad, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: strpad + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tset_strpad_c(type_id, strpad) BIND(C,NAME='h5tset_strpad_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: strpad + END FUNCTION h5tset_strpad_c + END INTERFACE + + hdferr = h5tset_strpad_c(type_id, strpad) + END SUBROUTINE h5tset_strpad_f + +! +!****s* H5T/h5tget_nmembers_f +! +! NAME +! h5tget_nmembers_f +! +! PURPOSE +! Retrieves the number of fields in a compound datatype. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! num_members - number of members +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tget_nmembers_f(type_id, num_members, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: num_members + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_nmembers_c(type_id, num_members) BIND(C,NAME='h5tget_nmembers_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: num_members + END FUNCTION h5tget_nmembers_c + END INTERFACE + + hdferr = h5tget_nmembers_c(type_id, num_members) + END SUBROUTINE h5tget_nmembers_f + +! +!****s* H5T/h5tget_member_name_f +! +! NAME +! h5tget_member_name_f +! +! PURPOSE +! Retrieves the name of a field of a compound datatype. +! +! INPUTS +! type_id - datatype identifier +! index - filed index (0-based) +! OUTPUTS +! member_name - buffer to hold member's name +! namelen - name length +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_member_name_f(type_id, index, member_name, namelen, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: index + CHARACTER(LEN=*), INTENT(OUT) :: member_name + INTEGER, INTENT(OUT) :: namelen + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_member_name_c(type_id, index, member_name, namelen) BIND(C,NAME='h5tget_member_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: index + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: member_name + INTEGER, INTENT(OUT) :: namelen + END FUNCTION h5tget_member_name_c + END INTERFACE + + hdferr = h5tget_member_name_c(type_id, index, member_name, namelen) + END SUBROUTINE h5tget_member_name_f + +! +!****s* H5T/h5tget_member_offset_f +! +! NAME +! h5tget_member_offset_f +! +! PURPOSE +! Retrieves the offset of a field of a compound datatype. +! +! INPUTS +! type_id - datatype identifier +! member_no - number of the field +! OUTPUTS +! offset - byte offset of the requested field +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_member_offset_f(type_id, member_no, offset, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER(SIZE_T), INTENT(OUT) :: offset + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_member_offset_c(type_id, member_no, offset ) BIND(C,NAME='h5tget_member_offset_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER(SIZE_T), INTENT(OUT) :: offset + END FUNCTION h5tget_member_offset_c + END INTERFACE + + hdferr = h5tget_member_offset_c(type_id, member_no, offset ) + END SUBROUTINE h5tget_member_offset_f +! +!****s* H5T/h5tget_member_index_f +! +! NAME +! h5tget_member_index_f +! +! PURPOSE +! Retrieves the index of a compound or enumeration datatype member. +! +! INPUTS +! type_id - datatype identifier +! name - name of the field or member whose index to +! to be retrieved from the datatype. +! OUTPUTS +! index - 0-based index of the filed or member (0 to N-1) +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 26, 2002 +! +! SOURCE + SUBROUTINE h5tget_member_index_f(type_id, name, index, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(OUT) :: index + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen ! Name length + + INTERFACE + INTEGER FUNCTION h5tget_member_index_c(type_id, name, namelen, index) BIND(C,NAME='h5tget_member_index_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: namelen + INTEGER, INTENT(OUT) :: index + END FUNCTION h5tget_member_index_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5tget_member_index_c(type_id, name, namelen, index) + END SUBROUTINE h5tget_member_index_f + + +! !$! +! !$!****s* H5T/h5tget_member_dim_f +! !$! +! !$! NAME +! !$! h5tget_member_dim_f +! !$! +! !$! PURPOSE +! !$! This function is not supported in hdf5-1.4.* +! !$! +! !$! INPUTS +! !$! OUTPUTS +! !$! hdferr: - error code +! !$! Success: 0 +! !$! Failure: -1 +! !$! +! !$! AUTHOR +! !$! Elena Pourmal +! !$! August 12, 1999 +! !$! +! !$! HISTORY +! !$! Explicit Fortran interfaces were added for +! !$! called C functions (it is needed for Windows +! !$! port). March 7, 2001 +! !$! +! !$! SOURCE +! !$! SUBROUTINE h5tget_member_dims_f(type_id, field_idx,dims, field_dims, perm, hdferr) +! !$! +! !$! IMPLICIT NONE +! !$! INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier +! !$! INTEGER, INTENT(IN) :: field_idx !Field index (0-based) of +! !$! !field_dims, perm) +! !$! INTEGER, INTENT(OUT) :: dims !number of dimensions of the field +! !$! +! !$! INTEGER(SIZE_T),DIMENSION(*), INTENT(OUT) :: field_dims !buffer to store the +! !$! !dimensions of the field +! !$! INTEGER, DIMENSION(*), INTENT(OUT) :: perm !buffer to store the +! !$! !permutation vector of the field +! !$! INTEGER, INTENT(OUT) :: hdferr ! Error code +! !$!*****! +! !$! INTEGER, EXTERNAL :: h5tget_member_dims_c +! !$! hdferr = h5tget_member_dims_c(type_id, field_idx, dims, field_dims, perm) +! !$! +! !$! END SUBROUTINE h5tget_member_dims_f + + +!****s* H5T/h5tget_array_dims_f +! +! NAME +! h5tget_array_dims_f +! +! PURPOSE +! Returns sizes of array dimensions. +! +! INPUTS +! type_id - array datatype identifier +! OUTPUTS +! dims - buffer to store array datatype dimensions +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_array_dims_f(type_id, dims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) :: dims + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_array_dims_c(type_id, dims) BIND(C,NAME='h5tget_array_dims_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) :: dims + END FUNCTION h5tget_array_dims_c + END INTERFACE + + hdferr = h5tget_array_dims_c(type_id, dims) + + END SUBROUTINE h5tget_array_dims_f + +! +!****s* H5T/h5tget_array_ndims_f +! +! NAME +! h5tget_array_ndims_f +! +! PURPOSE +! Returns the rank of an array datatype. +! +! INPUTS +! type_id - array datatype identifier +! OUTPUTS +! ndims - number of array dimensions +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_array_ndims_f(type_id, ndims, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: ndims + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_array_ndims_c(type_id, ndims) BIND(C,NAME='h5tget_array_ndims_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: ndims + END FUNCTION h5tget_array_ndims_c + END INTERFACE + + hdferr = h5tget_array_ndims_c(type_id, ndims) + + END SUBROUTINE h5tget_array_ndims_f + +! +!****s* H5T/h5tget_super_f +! +! NAME +! h5tget_super_f +! +! PURPOSE +! Returns the base datatype from which a datatype is derived. +! +! INPUTS +! type_id - datatype identifier +! OUTPUTS +! base_type_id - identifier of the base type +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_super_f(type_id, base_type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: base_type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_super_c(type_id, base_type_id) BIND(C,NAME='h5tget_super_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: base_type_id + END FUNCTION h5tget_super_c + END INTERFACE + + hdferr = h5tget_super_c(type_id, base_type_id) + + END SUBROUTINE h5tget_super_f + +! +!****s* H5T/h5tget_member_type_f +! +! NAME +! h5tget_member_type_f +! +! PURPOSE +! Returns the datatype of the specified member. +! +! INPUTS +! type_id - compound datatype identifier +! field_idx - field index (0-based) +! +! OUTPUTS +! datatype - identifier of the member's datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_member_type_f(type_id, field_idx, datatype, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: field_idx + INTEGER(HID_T), INTENT(OUT) :: datatype + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_member_type_c(type_id, field_idx , datatype) & + BIND(C,NAME='h5tget_member_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: field_idx + INTEGER(HID_T), INTENT(OUT) :: datatype + END FUNCTION h5tget_member_type_c + END INTERFACE + + hdferr = h5tget_member_type_c(type_id, field_idx , datatype) + END SUBROUTINE h5tget_member_type_f + +! +!****s* H5T/h5tcreate_f +! +! NAME +! h5tcreate_f +! +! PURPOSE +! Creates a new datatype. +! +! INPUTS +! class - Datatype class can be one of: +! H5T_COMPOUND_F +! H5T_ENUM_F +! H5T_OPAQUE_F +! H5T_STRING_F +! +! size - Size of the datatype. +! OUTPUTS +! type_id - Datatype identifier. +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tcreate_f(class, size, type_id, hdferr) + IMPLICIT NONE + INTEGER , INTENT(IN) :: class + INTEGER(SIZE_T), INTENT(IN) :: size + INTEGER(HID_T) , INTENT(OUT) :: type_id + INTEGER , INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tcreate_c(class, size, type_id) BIND(C,NAME='h5tcreate_c') + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER, INTENT(IN) :: class + INTEGER(SIZE_T), INTENT(IN) :: size + INTEGER(HID_T), INTENT(OUT) :: type_id + END FUNCTION h5tcreate_c + END INTERFACE + + hdferr = h5tcreate_c(class, size, type_id) + END SUBROUTINE h5tcreate_f + +! +!****s* H5T/h5tinsert_f +! +! NAME +! h5tinsert_f +! +! PURPOSE +! Adds a new member to a compound datatype. +! +! INPUTS +! type_id - compound datatype identifier +! name - name of the field to insert +! offset - start of the member in an instance of +! the compound datatype +! field_id - datatype identifier of the field to insert +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tinsert_f(type_id, name, offset, field_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER(SIZE_T), INTENT(IN) :: offset + INTEGER(HID_T), INTENT(IN) :: field_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5tinsert_c(type_id, name, namelen, offset, field_id) BIND(C,NAME='h5tinsert_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER(SIZE_T), INTENT(IN) :: offset + INTEGER(HID_T), INTENT(IN) :: field_id + INTEGER :: namelen + END FUNCTION h5tinsert_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5tinsert_c(type_id, name, namelen, offset, field_id ) + END SUBROUTINE h5tinsert_f + +! +!****s* H5T/h5tpack_f +! +! NAME +! h5tpack_f +! +! PURPOSE +! Recursively removes padding from within a compound datatype. +! +! INPUTS +! type_id - compound datatype identifier +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tpack_f(type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tpack_c(type_id) BIND(C,NAME='h5tpack_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + END FUNCTION h5tpack_c + END INTERFACE + + hdferr = h5tpack_c(type_id) + END SUBROUTINE h5tpack_f + +! !$! +! !$!****s* H5T/h5tinsert_array_f +! !$! +! !$! NAME +! !$! h5tinsert_array_f +! !$! +! !$! PURPOSE +! !$! This function is not available on hdf5-1.4.* +! !$! +! !$! INPUTS +! !$! OUTPUTS +! !$! hdferr: - error code +! !$! Success: 0 +! !$! Failure: -1 +! !$! +! !$! AUTHOR +! !$! Elena Pourmal +! !$! August 12, 1999 +! !$! +! !$! HISTORY +! !$! Explicit Fortran interfaces were added for +! !$! called C functions (it is needed for Windows +! !$! port). March 7, 2001 +! !$! SOURCE +! SUBROUTINE h5tinsert_array_f(parent_id,name,offset, ndims, dims, member_id, hdferr, perm) +! IMPLICIT NONE +! INTEGER(HID_T), INTENT(IN) :: parent_id ! identifier of the parent compound datatype +! CHARACTER(LEN=*), INTENT(IN) :: name !Name of the new member +! INTEGER(SIZE_T), INTENT(IN) :: offset !Offset to start of new member +! !within compound datatype +! INTEGER, INTENT(IN) :: ndims !Dimensionality of new member. +! !Valid values are 0 (zero) through 4 (four) +! INTEGER(SIZE_T), DIMENSION(*), INTENT(IN) :: dims !Size of new member array +! INTEGER(HID_T), INTENT(IN) :: member_id ! identifier of the datatype of the new member +! INTEGER, INTENT(OUT) :: hdferr ! Error code +! !*****! +! INTEGER, DIMENSION(*), OPTIONAL, INTENT(IN) :: perm +! !Pointer to buffer to store +! !the permutation vector of the field +! INTEGER :: namelen, sizeofperm +! INTEGER, EXTERNAL :: h5tinsert_array_c, h5tinsert_array_c2 +! namelen = LEN(name) +! if (present(perm)) then +! hdferr = h5tinsert_array_c(parent_id, name, namelen, offset, ndims,dims, member_id, perm) +! else +! hdferr = h5tinsert_array_c2(parent_id, name, namelen, offset, ndims,dims, member_id) +! end if +! +! END SUBROUTINE h5tinsert_array_f + +! +!****s* H5T/h5tarray_create_f +! +! NAME +! h5tarray_create_f +! +! PURPOSE +! Creates an array datatype object. +! +! INPUTS +! base_id - datatype identifier for the array +! base datatype +! rank - rank of the array +! dims - array dimension sizes +! OUTPUTS +! type_id - array datatype identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tarray_create_f(base_id, rank, dims, type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: base_id + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims + INTEGER(HID_T), INTENT(OUT) :: type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tarray_create_c(base_id, rank, dims, type_id) BIND(C,NAME='h5tarray_create_c') + IMPORT :: HID_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: base_id + INTEGER, INTENT(IN) :: rank + INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims + INTEGER(HID_T), INTENT(OUT) :: type_id + END FUNCTION h5tarray_create_c + END INTERFACE + + hdferr = h5tarray_create_c(base_id, rank, dims, type_id) + + END SUBROUTINE h5tarray_create_f + +! +!****s* H5T/h5tenum_create_f +! +! NAME +! h5tenum_create_f +! +! PURPOSE +! Creates a new enumeration datatype. +! +! INPUTS +! parent_id - datatype identifier for base datatype +! OUTPUTS +! new_type_id - datatype identifier for the enumeration datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tenum_create_f(parent_id, new_type_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: parent_id + INTEGER(HID_T), INTENT(OUT) :: new_type_id + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tenum_create_c(parent_id, new_type_id) BIND(C,NAME='h5tenum_create_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: parent_id + INTEGER(HID_T), INTENT(OUT) :: new_type_id + END FUNCTION h5tenum_create_c + END INTERFACE + + hdferr = h5tenum_create_c(parent_id, new_type_id) + END SUBROUTINE h5tenum_create_f +! +!****s* H5T/h5tenum_nameof_f +! +! NAME +! h5tenum_nameof_f +! +! PURPOSE +! Returns the symbol name corresponding to a specified +! member of an enumeration datatype. +! +! INPUTS +! type_id - datatype identifier +! value - value of the enumeration datatype +! namelen - name buffer size +! OUTPUTS +! name - buffer to hold symbol name +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! NOTE +! According to the standard: Because an INTENT(OUT) variable is considered undefined +! on entry to the procedure, any default initialization specified for its type will +! be applied. So we need to blank out the "name" to be portable and eliminate any +! characters the "name' may contain upon entry, depending on compiler implementation. +! SOURCE + SUBROUTINE h5tenum_nameof_f(type_id, value, namelen, name, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(OUT) :: name + INTEGER(SIZE_T), INTENT(IN) :: namelen + INTEGER, INTENT(IN) :: value + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tenum_nameof_c(type_id, value, name, namelen) BIND(C,NAME='h5tenum_nameof_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: name + INTEGER(SIZE_T), INTENT(IN) :: namelen + INTEGER, INTENT(IN) :: value + END FUNCTION h5tenum_nameof_c + END INTERFACE + + name(1:LEN(name)) = ' ' + + hdferr = h5tenum_nameof_c(type_id, value, name, namelen) + END SUBROUTINE h5tenum_nameof_f +! +!****s* H5T/h5tenum_valuof_f +! +! NAME +! h5tenum_valuof_f +! +! PURPOSE +! Returns the value corresponding to a specified +! member of an enumeration datatype. +! +! INPUTS +! type_id - datatype identifier +! name - symbol name +! OUTPUTS +! value - value of the enumeration datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! +! SOURCE + SUBROUTINE h5tenum_valueof_f(type_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(OUT) :: value + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5tenum_valueof_c(type_id, name, namelen, value) & + BIND(C,NAME='h5tenum_valueof_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: namelen + INTEGER, INTENT(OUT) :: value + END FUNCTION h5tenum_valueof_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5tenum_valueof_c(type_id, name, namelen, value) + END SUBROUTINE h5tenum_valueof_f + +! +!****s* H5T/h5tget_member_value_f +! +! NAME +! h5tget_member_value_f +! +! PURPOSE +! Returns the value of an enumeration datatype member. +! +! INPUTS +! type_id - datatype identifier +! member_no - number of the enumeration datatype member +! OUTPUTS +! value - value of the enumeration datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_member_value_f(type_id, member_no, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER, INTENT(OUT) :: value + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_member_value_c(type_id, member_no, value) & + BIND(C,NAME='h5tget_member_value_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER, INTENT(OUT) :: value + END FUNCTION h5tget_member_value_c + END INTERFACE + + hdferr = h5tget_member_value_c(type_id, member_no, value) + END SUBROUTINE h5tget_member_value_f + +! +!****s* H5T/h5tset_tag_f +! +! NAME +! h5tset_tag_f +! +! PURPOSE +! Tags an opaque datatype. +! +! INPUTS +! type_id - identifier for opaque datatype +! tag - unique ASCII string with which the opaque +! datatype is to be tagged. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tset_tag_f(type_id, tag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: tag + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: taglen + + INTERFACE + INTEGER FUNCTION h5tset_tag_c(type_id, tag, taglen) BIND(C,NAME='h5tset_tag_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: tag + INTEGER :: taglen + END FUNCTION h5tset_tag_c + END INTERFACE + + taglen = LEN(tag) + hdferr = h5tset_tag_c(type_id, tag, taglen) + END SUBROUTINE h5tset_tag_f + +! +!****s* H5T/h5tget_tag_f +! +! NAME +! h5tget_tag_f +! +! PURPOSE +! Gets the tag associated with an opaque datatype. +! +! INPUTS +! type_id - identifier for opaque datatype +! OUTPUTS +! tag - unique ASCII string associated with opaque +! datatype +! taglen - Length of tag +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tget_tag_f(type_id, tag,taglen, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(OUT) :: tag + INTEGER, INTENT(OUT) :: taglen + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER(SIZE_T):: tag_size ! Declared character length of tab + INTERFACE + INTEGER FUNCTION h5tget_tag_c(type_id, tag, tag_size, taglen) & + BIND(C,NAME='h5tget_tag_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: tag + INTEGER(SIZE_T), INTENT(IN) :: tag_size + INTEGER, INTENT(OUT) :: taglen + END FUNCTION h5tget_tag_c + END INTERFACE + + tag_size = LEN(tag) + hdferr = h5tget_tag_c(type_id, tag, tag_size, taglen ) + END SUBROUTINE h5tget_tag_f + +! +!****s* H5T/h5tvlen_create_f +! +! NAME +! h5tvlen_create_f +! +! PURPOSE +! Creates a new variable-length datatype. +! +! INPUTS +! type_id - identifier iof base datatype +! OUTPUTS +! vltype_id - identifier for VL datatype +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! Wednesday, October 23, 2002 +! +! NOTES +! Only basic Fortran base datatypes are supported +! +! SOURCE + SUBROUTINE h5tvlen_create_f(type_id, vltype_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: vltype_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tvlen_create_c(type_id, vltype_id) BIND(C,NAME='h5tvlen_create_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER(HID_T), INTENT(OUT) :: vltype_id + END FUNCTION h5tvlen_create_c + END INTERFACE + + hdferr = h5tvlen_create_c(type_id, vltype_id) + END SUBROUTINE h5tvlen_create_f + +! +!****s* H5T/h5tis_variable_str_f +! +! NAME +! h5tis_variable_str_f +! +! PURPOSE +! Determines whether a dattype is a variable string. +! +! INPUTS +! type_id - datartpe identifier +! OUTPUTS +! status - flag to indicate if datatype +! is a variable string ( TRUE or FALSE) +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! SOURCE + SUBROUTINE h5tis_variable_str_f(type_id, status, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + LOGICAL, INTENT(OUT) :: status + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: flag ! "TRUE/FALSE/ERROR from C" + + INTERFACE + INTEGER FUNCTION h5tis_variable_str_c(type_id, flag) & + BIND(C,NAME='h5tis_variable_str_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER :: flag + END FUNCTION h5tis_variable_str_c + END INTERFACE + + hdferr = h5tis_variable_str_c(type_id, flag) + status = .TRUE. + IF (flag .EQ. 0) status = .FALSE. + + END SUBROUTINE h5tis_variable_str_f + +! +!****s* H5T/h5tget_member_class_f +! +! NAME +! h5tget_member_class_f +! +! PURPOSE +! Returns datatype class of compound datatype member. +! +! INPUTS +! type_id - datartpe identifier +! member_no - index of compound datatype member +! OUTPUTS +! class - class type for compound dadtype member +! Valid classes: +! H5T_NO_CLASS_F (error) +! H5T_INTEGER_F +! H5T_FLOAT_F +! H5T_TIME_F +! H5T_STRING_F +! H5T_BITFIELD_F +! H5T_OPAQUE_F +! H5T_COMPOUND_F +! H5T_REFERENCE_F +! H5T_ENUM_F +! H5T_VLEN_F +! H5T_ARRAY_F +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! April 6, 2005 +! +! SOURCE + SUBROUTINE h5tget_member_class_f(type_id, member_no, class, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER, INTENT(OUT) :: class + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_member_class_c(type_id, member_no, class) & + BIND(C,NAME='h5tget_member_class_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + INTEGER, INTENT(IN) :: member_no + INTEGER, INTENT(OUT) :: class + END FUNCTION h5tget_member_class_c + END INTERFACE + + hdferr = h5tget_member_class_c(type_id, member_no, class) + + END SUBROUTINE h5tget_member_class_f + +! +!****s* H5T/h5tcommit_anon_f +! +! NAME +! h5tcommit_anon_f +! +! PURPOSE +! Commits a transient datatype to a file, +! creating a new named datatype, +! but does not link it into the file structure. +! +! INPUTS +! loc_id - A file or group identifier specifying the file +! in which the new named datatype is to be created. +! dtype_id - A datatype identifier. +! +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! OPTIONAL PARAMETERS +! tcpl_id - A datatype creation property list identifier. +! (H5P_DEFAULT_F for the default property list.) +! tapl_id - A datatype access property list identifier. +! should always be passed as the value H5P_DEFAULT_F. +! +! AUTHOR +! M. Scot Breitenfeld +! February 25, 2008 +! +! SOURCE + SUBROUTINE h5tcommit_anon_f(loc_id, dtype_id, hdferr, tcpl_id, tapl_id) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER, INTENT(OUT) :: hdferr + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id + INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id +!***** + INTEGER(HID_T) :: tcpl_id_default + INTEGER(HID_T) :: tapl_id_default + + INTERFACE + INTEGER FUNCTION h5tcommit_anon_c(loc_id, dtype_id, & + tcpl_id_default, tapl_id_default) BIND(C,NAME='h5tcommit_anon_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER(HID_T) :: tcpl_id_default + INTEGER(HID_T) :: tapl_id_default + END FUNCTION h5tcommit_anon_c + END INTERFACE + + tcpl_id_default = H5P_DEFAULT_F + tapl_id_default = H5P_DEFAULT_F + + IF(PRESENT(tcpl_id)) tcpl_id_default = tcpl_id + IF(PRESENT(tapl_id)) tapl_id_default = tapl_id + + hdferr = h5tcommit_anon_c(loc_id, dtype_id, & + tcpl_id_default, tapl_id_default ) + + END SUBROUTINE h5tcommit_anon_f + +! +!****s* H5T/h5tcommitted_f +! +! NAME +! h5tcommitted_f +! +! PURPOSE +! Determines whether a datatype is a named type or a transient type. +! +! INPUTS +! dtype_id - A datatype identifier. +! +! OUTPUTS +! committed - .TRUE., if the datatype has been committed +! .FALSE., if the datatype has not been committed. +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! February 25, 2008 +! +! SOURCE + SUBROUTINE h5tcommitted_f(dtype_id, committed, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + LOGICAL, INTENT(OUT) :: committed + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tcommitted_c(dtype_id) BIND(C,NAME='h5tcommitted_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + END FUNCTION h5tcommitted_c + END INTERFACE + + hdferr = h5tcommitted_c(dtype_id) + + IF(hdferr.GT.0)THEN + committed = .TRUE. + hdferr = 0 + ELSE IF(hdferr.EQ.0)THEN + committed = .FALSE. + hdferr = 0 + ELSE + hdferr = -1 + ENDIF + + END SUBROUTINE h5tcommitted_f + +! +!****s* H5T/H5Tdecode_f +! +! NAME +! H5Tdecode_f +! +! PURPOSE +! Decode a binary object description of data type and return a new object handle. +! INPUTS +! buf - Buffer for the data space object to be decoded. +! obj_id - Object ID +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! April 9, 2008 +! +! SOURCE + SUBROUTINE h5tdecode_f(buf, obj_id, hdferr) + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: buf + INTEGER(HID_T), INTENT(OUT) :: obj_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tdecode_c(buf, obj_id) BIND(C,NAME='h5tdecode_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: buf + INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID + END FUNCTION h5tdecode_c + END INTERFACE + + hdferr = h5tdecode_c(buf, obj_id) + + END SUBROUTINE h5tdecode_f + +! +!****s* H5T/H5Tencode_f +! +! NAME +! H5Tencode_f +! +! PURPOSE +! Encode a data type object description into a binary buffer. +! +! INPUTS +! obj_id - Identifier of the object to be encoded. +! buf - Buffer for the object to be encoded into. +! nalloc - The size of the allocated buffer. +! OUTPUTS +! nalloc - The size of the buffer needed. +! hdferr - Returns 0 if successful and -1 if fails. +! +! AUTHOR +! M. Scot Breitenfeld +! April 9, 2008 +! SOURCE + SUBROUTINE h5tencode_f(obj_id, buf, nalloc, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(LEN=*), INTENT(OUT) :: buf + INTEGER(SIZE_T), INTENT(INOUT) :: nalloc + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5tencode_c(buf, obj_id, nalloc) BIND(C,NAME='h5tencode_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: obj_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(OUT) :: buf + INTEGER(SIZE_T), INTENT(INOUT) :: nalloc + END FUNCTION h5tencode_c + END INTERFACE + + hdferr = h5tencode_c(buf, obj_id, nalloc) + + END SUBROUTINE h5tencode_f + +! +!****s* H5T/h5tget_create_plist_f +! +! NAME +! h5tget_create_plist_f +! +! PURPOSE +! Returns a copy of a datatype creation property list. +! +! INPUTS +! dtype_id - Datatype identifier +! OUTPUTS +! dtpl_id - Datatype property list identifier +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! April 9, 2008 +! +! SOURCE + SUBROUTINE h5tget_create_plist_f(dtype_id, dtpl_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER(HID_T), INTENT(OUT) :: dtpl_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_create_plist_c(dtype_id, dtpl_id) BIND(C,NAME='h5tget_create_plist_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER(HID_T), INTENT(OUT) :: dtpl_id + END FUNCTION h5tget_create_plist_c + END INTERFACE + + hdferr = h5tget_create_plist_c(dtype_id, dtpl_id) + END SUBROUTINE h5tget_create_plist_f + +! +!****s* H5T/h5tcompiler_conv_f +! +! NAME +! h5tcompiler_conv_f +! +! PURPOSE +! Check whether the library’s default conversion is hard conversion.R +! +! INPUTS +! src_id - Identifier for the source datatype. +! dst_id - Identifier for the destination datatype. +! OUTPUTS +! flag - TRUE for compiler conversion, FALSE for library conversion +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! April 9, 2008 +! SOURCE + SUBROUTINE h5tcompiler_conv_f( src_id, dst_id, flag, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_id + INTEGER(HID_T), INTENT(IN) :: dst_id + LOGICAL, INTENT(OUT) :: flag + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: c_flag + + INTERFACE + INTEGER FUNCTION h5tcompiler_conv_c(src_id, dst_id, c_flag) BIND(C,NAME='h5tcompiler_conv_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: src_id + INTEGER(HID_T), INTENT(IN) :: dst_id + INTEGER :: c_flag + END FUNCTION h5tcompiler_conv_c + END INTERFACE + + hdferr = h5tcompiler_conv_c(src_id, dst_id, c_flag) + + flag = .FALSE. + IF(c_flag .GT. 0) flag = .TRUE. + + END SUBROUTINE h5tcompiler_conv_f + +! +!****s* H5T/h5tget_native_type_f +! +! NAME +! h5tget_native_type_f +! +! PURPOSE +! Returns the native datatype of a specified datatype. +! +! INPUTS +! dtype_id - Datatype identifier for the dataset datatype. +! +! direction - Direction of search: +! H5T_DIR_DEFAULT, default direction is inscendent, +! H5T_DIR_ASCEND , in inscendent order, +! H5T_DIR_DESCEND, in descendent order. +! +! * NOTE: In C it is defined as a structure: H5T_direction_t +! +! OUTPUTS +! native_dtype_id - The native datatype identifier for the specified dataset datatype +! hdferr - Returns 0 if successful and -1 if fails +! AUTHOR +! M. Scot Breitenfeld +! June 18, 2008 +! SOURCE + SUBROUTINE h5tget_native_type_f(dtype_id, direction, native_dtype_id, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER, INTENT(IN) :: direction + INTEGER(HID_T), INTENT(OUT) :: native_dtype_id + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5tget_native_type_c(dtype_id, direction, native_dtype_id) BIND(C,NAME='h5tget_native_type_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: dtype_id + INTEGER, INTENT(IN) :: direction + INTEGER(HID_T), INTENT(OUT) :: native_dtype_id + END FUNCTION h5tget_native_type_c + END INTERFACE + + hdferr = h5tget_native_type_c(dtype_id, direction, native_dtype_id) + END SUBROUTINE h5tget_native_type_f + +!****s* H5T/H5Tconvert_f_F03 +! +! NAME +! H5Tconvert_f +! +! PURPOSE +! Converts data from between specified datatypes. +! +! Inputs: +! src_id - Identifier for the source datatype. +! dst_id - Identifier for the destination datatype. +! nelmts - Size of array buf. +! buf - Array containing pre-conversion values. +! background - Optional background buffer. +! plist_id - Dataset transfer property list identifier. +! +! Outputs: +! buf - Array containing post-conversion values. +! hdferr - error code: +! 0 on success and -1 on failure +! AUTHOR +! M. Scot Breitenfeld +! Decemember 8, 2008 +! +! Fortran2003 Interface: + SUBROUTINE h5tconvert_f(src_id, dst_id, nelmts, buf, hdferr, background, plist_id) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: src_id + INTEGER(HID_T) , INTENT(IN) :: dst_id + INTEGER(SIZE_T), INTENT(IN) :: nelmts + TYPE(C_PTR) , INTENT(INOUT) :: buf + INTEGER , INTENT(OUT) :: hdferr + TYPE(C_PTR) , INTENT(INOUT), OPTIONAL :: background + INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: plist_id +!***** + INTEGER(HID_T) :: plist_id_default + TYPE(C_PTR) :: background_default + + INTERFACE + INTEGER FUNCTION h5tconvert_c(src_id, dst_id, nelmts, buf, background, plist_id) & + BIND(C, NAME='h5tconvert_c') + IMPORT :: c_ptr + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: src_id + INTEGER(HID_T) , INTENT(IN) :: dst_id + INTEGER(SIZE_T), INTENT(IN) :: nelmts + TYPE(C_PTR) , VALUE :: buf + TYPE(C_PTR) , VALUE :: background + INTEGER(HID_T) , INTENT(IN) :: plist_id + END FUNCTION h5tconvert_c + END INTERFACE + + plist_id_default = H5P_DEFAULT_F + IF(PRESENT(plist_id)) plist_id_default = plist_id + + background_default = C_NULL_PTR + IF(PRESENT(background)) background_default = background + + hdferr = H5Tconvert_c(src_id, dst_id, nelmts, buf, background_default, plist_id_default) + + END SUBROUTINE h5tconvert_f +! +!****s* H5T/h5tenum_insert_f90 +! +! NAME +! h5tenum_insert_f +! +! PURPOSE +! Inserts a new enumeration datatype member. +! +! INPUTS +! type_id - Datatype identifier for the enumeration datatype. +! name - Datatype identifier. +! value - Value of the new member. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). March 7, 2001 +! SOURCE + SUBROUTINE h5tenum_insert_f90(type_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: value + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen + INTERFACE + INTEGER FUNCTION h5tenum_insert_c(type_id, name, namelen, value) BIND(C,NAME='h5tenum_insert_c') + IMPORT :: C_CHAR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER, INTENT(IN) :: value + INTEGER :: namelen + END FUNCTION h5tenum_insert_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5tenum_insert_c(type_id, name, namelen, value) + END SUBROUTINE h5tenum_insert_f90 + +! +!****s* H5T/h5tenum_insert_f03 +! +! NAME +! h5tenum_insert_f +! +! PURPOSE +! Inserts a new enumeration datatype member. +! +! INPUTS +! type_id - Datatype identifier for the enumeration datatype. +! name - Datatype identifier. +! value - Pointer to the value of the new member. +! OUTPUTS +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! M. Scot Breitenfeld +! February 6, 2015 +! +! HISTORY +! F2003 implementation of function +! SOURCE + SUBROUTINE h5tenum_insert_f03(type_id, name, value, hdferr) + IMPLICIT NONE + INTEGER(HID_T) , INTENT(IN) :: type_id + CHARACTER(LEN=*), INTENT(IN) :: name + TYPE(C_PTR) , INTENT(IN) :: value + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: namelen + + INTERFACE + INTEGER FUNCTION h5tenum_insert_ptr_c(type_id, name, namelen, value) & + BIND(C, NAME='h5tenum_insert_ptr_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: type_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name + INTEGER :: namelen + TYPE(C_PTR), VALUE :: value + END FUNCTION h5tenum_insert_ptr_c + END INTERFACE + + namelen = LEN(name) + hdferr = h5tenum_insert_ptr_c(type_id, name, namelen, value) + END SUBROUTINE h5tenum_insert_f03 + +END MODULE H5T diff --git a/fortran/src/H5Tff.f90 b/fortran/src/H5Tff.f90 deleted file mode 100644 index 4b4c0b6..0000000 --- a/fortran/src/H5Tff.f90 +++ /dev/null @@ -1,3105 +0,0 @@ -!****h* ROBODoc/H5T -! -! NAME -! MODULE H5T -! -! PURPOSE -! This file contains Fortran interfaces for H5T functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5T function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5T - - USE H5GLOBAL - -CONTAINS - -! -!****s* H5T/h5topen_f -! -! NAME -! h5topen_f -! -! PURPOSE -! Opens named datatype. -! -! INPUTS -! loc_id - location identifier -! name - a datatype name -! OUTPUTS -! type_id - datatype identifier -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! tapl_id - datatype access property list identifier. -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! Added optional parameter 'tapl_id' for compatability -! with H5Topen2. April 9, 2009. -! -! SOURCE - SUBROUTINE h5topen_f(loc_id, name, type_id, hdferr, tapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Datatype name within file or group - INTEGER(HID_T), INTENT(OUT) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! datatype access property list identifier -!***** - INTEGER :: namelen ! Name length - INTEGER(HID_T) :: tapl_id_default - - INTERFACE - INTEGER FUNCTION h5topen_c(loc_id, name, namelen, type_id, tapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TOPEN_C'::h5topen_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference ::name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(OUT) :: type_id - INTEGER(HID_T) :: tapl_id_default - END FUNCTION h5topen_c - END INTERFACE - - namelen = LEN(name) - - tapl_id_default = H5P_DEFAULT_F - IF(PRESENT(tapl_id)) tapl_id_default = tapl_id - - hdferr = h5topen_c(loc_id, name, namelen, type_id, tapl_id_default) - END SUBROUTINE h5topen_f -! -!****s* H5T/h5tcommit_f -! -! NAME -! h5tcommit_f -! -! PURPOSE -! Commits a transient datatype to a file, creating a -! new named datatype. -! -! INPUTS -! loc_id - location identifier -! name - name of the datatype to be stored -! at the specified location -! type_id - identifier of a datatype to be stored -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! lcpl_id - Link creation property list -! tcpl_id - Datatype creation property list -! tapl_id - Datatype access property list -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! - Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! - Added optional parameters introduced in version 1.8 -! M. Scot Breitenfeld -! -! SOURCE - SUBROUTINE h5tcommit_f(loc_id, name, type_id, hdferr, & - lcpl_id, tcpl_id, tapl_id ) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! File or group identifier - CHARACTER(LEN=*), INTENT(IN) :: name - ! Datatype name within file or group - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: lcpl_id ! Link creation property list - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id ! Datatype creation property list - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! Datatype access property list -!***** - - INTEGER :: namelen ! Name length - - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: tcpl_id_default - INTEGER(HID_T) :: tapl_id_default - - INTERFACE - INTEGER FUNCTION h5tcommit_c(loc_id, name, namelen, type_id, & - lcpl_id_default, tcpl_id_default, tapl_id_default ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCOMMIT_C'::h5tcommit_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference ::name - INTEGER(HID_T), INTENT(IN) :: loc_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER :: namelen - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T) :: lcpl_id_default - INTEGER(HID_T) :: tcpl_id_default - INTEGER(HID_T) :: tapl_id_default - END FUNCTION h5tcommit_c - END INTERFACE - - lcpl_id_default = H5P_DEFAULT_F - tcpl_id_default = H5P_DEFAULT_F - tapl_id_default = H5P_DEFAULT_F - - IF (PRESENT(lcpl_id)) lcpl_id_default = lcpl_id - IF (PRESENT(tcpl_id)) tcpl_id_default = tcpl_id - IF (PRESENT(tapl_id)) tapl_id_default = tapl_id - - namelen = LEN(name) - - hdferr = h5tcommit_c(loc_id, name, namelen, type_id, & - lcpl_id_default, tcpl_id_default, tapl_id_default ) - - END SUBROUTINE h5tcommit_f -! -!****s* H5T/h5tcopy_f -! -! NAME -! h5tcopy_f -! -! PURPOSE -! Creates a copy of exisiting datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! new_type_id - identifier of datatype's copy -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tcopy_f(type_id, new_type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(HID_T), INTENT(OUT) :: new_type_id - ! Identifier of datatype's copy - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tcopy_c(type_id, new_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCOPY_C'::h5tcopy_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(OUT) :: new_type_id - END FUNCTION h5tcopy_c - END INTERFACE - - hdferr = h5tcopy_c(type_id, new_type_id) - END SUBROUTINE h5tcopy_f -! -!****s* H5T/h5tequal_f -! -! NAME -! h5tequal_f -! -! PURPOSE -! Determines whether two datatype identifiers refer -! to the same datatype. -! -! INPUTS -! type1_id - datatype identifier -! type2_id - datatype identifier -! OUTPUTS -! flag - TRUE/FALSE flag to indicate -! if two datatypes are equal -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tequal_f(type1_id, type2_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type1_id ! Datatype identifier - INTEGER(HID_T), INTENT(IN) :: type2_id ! Datatype identifier - LOGICAL, INTENT(OUT) :: flag ! TRUE/FALSE flag to indicate if two - ! datatypes are equal - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: c_flag - INTERFACE - INTEGER FUNCTION h5tequal_c(type1_id, type2_id, c_flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TEQUAL_C'::h5tequal_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type1_id - INTEGER(HID_T), INTENT(IN) :: type2_id - INTEGER :: c_flag - END FUNCTION h5tequal_c - END INTERFACE - - flag = .FALSE. - hdferr = h5tequal_c(type1_id, type2_id, c_flag) - if(c_flag .gt. 0) flag = .TRUE. - END SUBROUTINE h5tequal_f -! -!****s* H5T/h5tclose_f -! -! NAME -! h5tclose_f -! -! PURPOSE -! Releases a datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tclose_f(type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tclose_c(type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCLOSE_C'::h5tclose_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - END FUNCTION h5tclose_c - END INTERFACE - - hdferr = h5tclose_c(type_id) - END SUBROUTINE h5tclose_f -! -!****s* H5T/h5tget_class_f -! -! NAME -! h5tget_class_f -! -! PURPOSE -! Returns the datatype class identifier. -! -! INPUTS -! type_id - Datatype identifier -! OUTPUTS -! class - Class, possible values are: -! H5T_NO_CLASS_F (-1) -! H5T_INTEGER_F (0) -! H5T_FLOAT_F (1) -! H5T_TIME_F (2) -! H5T_STRING_F (3) -! H5T_BITFIELD_F (4) -! H5T_OPAQUE_F (5) -! H5T_COMPOUND_F (6) -! H5T_REFERENCE_F (7) -! H5T_ENUM_F (8) -! H5T_VLEN_F (9) -! H5T_ARRAY_F (10) -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_class_f(type_id, class, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: class - INTEGER, INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5tget_class_c(type_id, class) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_CLASS_C'::h5tget_class_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: class - END FUNCTION h5tget_class_c - END INTERFACE - - hdferr = h5tget_class_c(type_id, class) - END SUBROUTINE h5tget_class_f -! -!****s* H5T/h5tget_size_f -! -! NAME -! h5tget_size_f -! -! PURPOSE -! Returns the size of a datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! size - datatype size -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_size_f(type_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(OUT) :: size ! Datatype size - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_size_c(type_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_SIZE_C'::h5tget_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(OUT) :: size - END FUNCTION h5tget_size_c - END INTERFACE - - hdferr = h5tget_size_c(type_id, size) - END SUBROUTINE h5tget_size_f - -! -!****s* H5T/h5tset_size_f -! -! NAME -! h5tset_size_f -! -! PURPOSE -! Sets the total size for an atomic datatype. -! -! INPUTS -! type_id - datatype identifier -! size - size of the datatype -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! -! SOURCE - SUBROUTINE h5tset_size_f(type_id, size, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(IN) :: size ! Datatype size - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_size_c(type_id, size) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_SIZE_C'::h5tset_size_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: size - END FUNCTION h5tset_size_c - END INTERFACE - - hdferr = h5tset_size_c(type_id, size) - END SUBROUTINE h5tset_size_f - -! -!****s* H5T/h5tget_order_f -! -! NAME -! h5tget_order_f -! -! PURPOSE -! Returns the byte order of an atomic datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! order - byte order for the datatype, possible -! values are: -! H5T_ORDER_LE_F -! H5T_ORDER_BE_F -! H5T_ORDER_VAX_F (not implemented yet) -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_order_f(type_id, order, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: order - ! Datatype byte order, possible values are: - ! H5T_ORDER_LE_F - ! H5T_ORDER_BE_F - ! H5T_ORDER_VAX_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_order_c(type_id, order) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_ORDER_C'::h5tget_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: order - END FUNCTION h5tget_order_c - END INTERFACE - - hdferr = h5tget_order_c(type_id, order) - END SUBROUTINE h5tget_order_f -! -!****s* H5T/h5tset_order_f -! -! NAME -! h5tset_order_f -! -! PURPOSE -! Sets the byte ordering of an atomic datatype. -! -! INPUTS -! type_id - datatype identifier -! order - datatype byte order Possible values are: -! H5T_ORDER_LE_F -! H5T_ORDER_BE_F -! H5T_ORDER_VAX_F (not implemented yet) -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tset_order_f(type_id, order, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: order ! Datatype byte order, possible values - ! are: - ! H5T_ORDER_LE_F - ! H5T_ORDER_BE_F - ! H5T_ORDER_VAX_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_order_c(type_id, order) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_ORDER_C'::h5tset_order_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: order - END FUNCTION h5tset_order_c - END INTERFACE - - hdferr = h5tset_order_c(type_id, order) - END SUBROUTINE h5tset_order_f - -! -!****s* H5T/h5tget_precision_f -! -! NAME -! h5tget_precision_f -! -! PURPOSE -! Returns the precision of an atomic datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! precision - precision of the datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_precision_f(type_id, precision, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(OUT) :: precision ! Datatype precision - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_precision_c (type_id, precision) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_PRECISION_C'::h5tget_precision_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(OUT) :: precision - END FUNCTION h5tget_precision_c - END INTERFACE - - hdferr = h5tget_precision_c(type_id, precision) - END SUBROUTINE h5tget_precision_f - -! -!****s* H5T/h5tset_precision_f -! -! NAME -! h5tset_precision_f -! -! PURPOSE -! Sets the precision of an atomic datatype. -! -! INPUTS -! type_id - datatype identifier -! precision - datatype precision -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tset_precision_f(type_id, precision, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(IN) :: precision ! Datatype precision - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_precision_c (type_id, precision) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_PRECISION_C'::h5tset_precision_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: precision - END FUNCTION h5tset_precision_c - END INTERFACE - - hdferr = h5tset_precision_c(type_id, precision) - END SUBROUTINE h5tset_precision_f - -! -!****s* H5T/h5tget_offset_f -! -! NAME -! h5tget_offset_f -! -! PURPOSE -! Retrieves the bit offset of the first significant bit. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! offset - offset value -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_offset_f(type_id, offset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(OUT) :: offset ! Datatype bit offset of the - ! first significant bit - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_offset_c(type_id, offset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_OFFSET_C'::h5tget_offset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(OUT) :: offset - END FUNCTION h5tget_offset_c - END INTERFACE - - hdferr = h5tget_offset_c(type_id, offset) - END SUBROUTINE h5tget_offset_f - -! -!****s* H5T/h5tset_offset_f -! -! NAME -! h5tset_offset_f -! -! PURPOSE -! Sets the bit offset of the first significant bit. -! -! INPUTS -! type_id - datatype identifier -! offset - offset value -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tset_offset_f(type_id, offset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(IN) :: offset ! Datatype bit offset of the - ! first significant bit - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_offset_c(type_id, offset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_OFFSET_C'::h5tset_offset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: offset - END FUNCTION h5tset_offset_c - END INTERFACE - - hdferr = h5tset_offset_c(type_id, offset) - END SUBROUTINE h5tset_offset_f - -! -!****s* H5T/h5tget_pad_f -! -! NAME -! h5tget_pad_f -! -! PURPOSE -! Retrieves the padding type of the least and -! most -significant bit padding. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! lsbpad - least-significant bit padding type -! msbpad - most-significant bit padding type -! Possible values of padding type are: -! H5T_PAD_ERROR_F = -1 -! H5T_PAD_ZERO_F = 0 -! H5T_PAD_ONE_F = 1 -! H5T_PAD_BACKGROUND_F = 2 -! H5T_PAD_NPAD_F = 3 -! hdferr - Returns 0 if successful and -1 if fails - -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_pad_f(type_id, lsbpad, msbpad, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: lsbpad ! padding type of the - ! least significant bit - INTEGER, INTENT(OUT) :: msbpad ! padding type of the - ! most significant bit - ! Possible values of padding type are: - ! H5T__PAD_ZERO_F = 0 - ! H5T__PAD_ONE_F = 1 - ! H5T__PAD_BACKGROUND_F = 2 - ! H5T_PAD_ERROR_F = -1 - ! H5T_PAD_NPAD_F = 3 - - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_pad_c(type_id, lsbpad, msbpad) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_PAD_C'::h5tget_pad_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: lsbpad - INTEGER, INTENT(OUT) :: msbpad - END FUNCTION h5tget_pad_c - END INTERFACE - - hdferr = h5tget_pad_c(type_id, lsbpad, msbpad) - END SUBROUTINE h5tget_pad_f - -! -!****s* H5T/h5tset_pad_f -! -! NAME -! h5tset_pad_f -! -! PURPOSE -! Sets the least and most-significant bits padding types. -! -! INPUTS -! type_id - datatype identifier -! lsbpad - least-significant bit padding type -! msbpad - most-significant bit padding type -! Possible values of padding type are: -! H5T_PAD_ERROR_F = -1 -! H5T_PAD_ZERO_F = 0 -! H5T_PAD_ONE_F = 1 -! H5T_PAD_BACKGROUND_F = 2 -! H5T_PAD_NPAD_F = 3 -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_pad_f(type_id, lsbpad, msbpad, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: lsbpad ! padding type of the - ! least significant bit - INTEGER, INTENT(IN) :: msbpad ! padding type of the - ! most significant bit - ! Possible values of padding type are: - ! H5T_PAD_ZERO_F = 0 - ! H5T_PAD_ONE_F = 1 - ! H5T_PAD_BACKGROUND_F = 2 - ! H5T_PAD_ERROR_F = -1 - ! H5T_PAD_NPAD_F = 3 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_pad_c(type_id, lsbpad, msbpad) - USE H5GLOBAL - INTEGER(HID_T), INTENT(IN) :: type_id - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_PAD_C'::h5tset_pad_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: lsbpad - INTEGER, INTENT(IN) :: msbpad - END FUNCTION h5tset_pad_c - END INTERFACE - - hdferr = h5tset_pad_c(type_id, lsbpad, msbpad) - END SUBROUTINE h5tset_pad_f - -! -!****s* H5T/h5tget_sign_f -! -! NAME -! h5tget_sign_f -! -! PURPOSE -! Retrieves the sign type for an integer type. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! sign - sign type -! Possible values are: -! - Unsigned integer type -! H5T_SGN_NONE_F = 0 -! - Two's complement signed integer type -! H5T_SGN_2_F = 1 -! - error value: H5T_SGN_ERROR_F=-1 -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_sign_f(type_id, sign, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: sign ! sign type for an integer type - !possible values are: - !Unsigned integer type H5T_SGN_NONE_F = 0 - !Two's complement signed integer type - !H5T_SGN_2_F = 1 - !or error value: H5T_SGN_ERROR_F=-1 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_sign_c(type_id, sign) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_SIGN_C'::h5tget_sign_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: sign - END FUNCTION h5tget_sign_c - END INTERFACE - - hdferr = h5tget_sign_c(type_id, sign) - END SUBROUTINE h5tget_sign_f - -! -!****s* H5T/h5tset_sign_f -! -! NAME -! h5tset_sign_f -! -! PURPOSE -! Sets the sign proprety for an integer type. -! -! INPUTS -! type_id - datatype identifier -! sign - sign type -! Possible values are: -! - Unsigned integer type -! H5T_SGN_NONE_F = 0 -! - Two's complement signed integer type -! H5T_SGN_2_F = 1 -! - error value: H5T_SGN_ERROR_F=-1 -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_sign_f(type_id, sign, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: sign !sign type for an integer type - !possible values are: - !Unsigned integer type H5T_SGN_NONE_F = 0 - !Two's complement signed integer type - !H5T_SGN_2_F = 1 - !or error value: H5T_SGN_ERROR_F=-1 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tset_sign_c(type_id, sign) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_SIGN_C'::h5tset_sign_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: sign - END FUNCTION h5tset_sign_c - END INTERFACE - - hdferr = h5tset_sign_c(type_id, sign) - END SUBROUTINE h5tset_sign_f - -! -!****s* H5T/h5tget_fields_f -! -! NAME -! h5tget_fields_f -! -! PURPOSE -! Retrieves floating point datatype bit field information. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! spos - sign bit-position -! epos - exponent bit-position -! esize - size of exponent in bits -! mpos - mantissa position -! msize - size of mantissa in bits -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(OUT) :: spos ! sign bit-position - INTEGER(SIZE_T), INTENT(OUT) :: epos ! exponent bit-position - INTEGER(SIZE_T), INTENT(OUT) :: esize ! size of exponent in bits - INTEGER(SIZE_T), INTENT(OUT) :: mpos ! mantissa bit-position - INTEGER(SIZE_T), INTENT(OUT) :: msize ! size of mantissa in bits - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_fields_c(type_id, spos, epos, esize, mpos, msize) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_FIELDS_C'::h5tget_fields_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(OUT) :: spos - INTEGER(SIZE_T), INTENT(OUT) :: epos - INTEGER(SIZE_T), INTENT(OUT) :: esize - INTEGER(SIZE_T), INTENT(OUT) :: mpos - INTEGER(SIZE_T), INTENT(OUT) :: msize - END FUNCTION h5tget_fields_c - END INTERFACE - - hdferr = h5tget_fields_c(type_id, spos, epos, esize, mpos, msize) - END SUBROUTINE h5tget_fields_f - -! -!****s* H5T/h5tset_fields_f -! -! NAME -! h5tset_fields_f -! -! PURPOSE -! Sets locations and sizes of floating point bit fields. -! -! INPUTS -! type_id - datatype identifier -! spos - sign bit-position -! epos - exponent bit-position -! esize - size of exponent in bits -! mpos - mantissa position -! msize - size of mantissa in bits -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_fields_f(type_id, spos, epos, esize, mpos, msize, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(IN) :: spos ! sign bit-position - INTEGER(SIZE_T), INTENT(IN) :: epos ! exponent bit-position - INTEGER(SIZE_T), INTENT(IN) :: esize ! size of exponent in bits - INTEGER(SIZE_T), INTENT(IN) :: mpos ! mantissa bit-position - INTEGER(SIZE_T), INTENT(IN) :: msize ! size of mantissa in bits - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tset_fields_c(type_id, spos, epos, esize, mpos, msize) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_FIELDS_C'::h5tset_fields_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: spos - INTEGER(SIZE_T), INTENT(IN) :: epos - INTEGER(SIZE_T), INTENT(IN) :: esize - INTEGER(SIZE_T), INTENT(IN) :: mpos - INTEGER(SIZE_T), INTENT(IN) :: msize - END FUNCTION h5tset_fields_c - END INTERFACE - - hdferr = h5tset_fields_c(type_id, spos, epos, esize, mpos, msize) - END SUBROUTINE h5tset_fields_f - -! -!****s* H5T/h5tget_ebias_f -! -! NAME -! h5tget_ebias_f -! -! PURPOSE -! Retrieves the exponent bias of a floating-point type. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! ebias - datatype exponent bias -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_ebias_f(type_id, ebias, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(OUT) :: ebias ! Datatype exponent bias of a floating-point type - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_ebias_c(type_id, ebias) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_EBIAS_C'::h5tget_ebias_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(OUT) :: ebias - END FUNCTION h5tget_ebias_c - END INTERFACE - - hdferr = h5tget_ebias_c(type_id, ebias) - END SUBROUTINE h5tget_ebias_f - -! -!****s* H5T/h5tset_ebias_f -! -! NAME -! h5tset_ebias_f -! -! PURPOSE -! Sets the exponent bias of a floating-point type. -! -! INPUTS -! type_id - datatype identifier -! ebias - datatype exponent bias -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_ebias_f(type_id, ebias, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(SIZE_T), INTENT(IN) :: ebias !Datatype exponent bias of a floating-point type - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tset_ebias_c(type_id, ebias) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_EBIAS_C'::h5tset_ebias_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(SIZE_T), INTENT(IN) :: ebias - END FUNCTION h5tset_ebias_c - END INTERFACE - - hdferr = h5tset_ebias_c(type_id, ebias) - END SUBROUTINE h5tset_ebias_f - -! -!****s* H5T/h5tget_norm_f -! -! NAME -! h5tget_norm_f -! -! PURPOSE -! Retrieves mantissa normalization of a floating-point -! datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! norm - normalization types, valid values are: -! H5T_NORM_IMPLIED_F(0) -! H5T_NORM_MSBSET_F(1) -! H5T_NORM_NONE_F(2) -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_norm_f(type_id, norm, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: norm !mantissa normalization of a floating-point datatype - !Valid normalization types are: - !H5T_NORM_IMPLIED_F(0),MSB of mantissa is not - !stored, always 1, H5T_NORM_MSBSET_F(1), MSB of - !mantissa is always 1, H5T_NORM_NONE_F(2) - !Mantissa is not normalize - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_norm_c(type_id, norm) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_NORM_C'::h5tget_norm_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: norm - END FUNCTION h5tget_norm_c - END INTERFACE - - hdferr = h5tget_norm_c(type_id, norm) - END SUBROUTINE h5tget_norm_f - -! -!****s* H5T/h5tset_norm_f -! -! NAME -! h5tset_norm_f -! -! PURPOSE -! Sets the mantissa normalization of a floating-point datatype. -! -! INPUTS -! type_id - datatype identifier -! norm - normalization types, valid values are: -! H5T_NORM_IMPLIED_F(0) -! H5T_NORM_MSBSET_F(1) -! H5T_NORM_NONE_F(2) -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tset_norm_f(type_id, norm, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: norm !mantissa normalization of a floating-point datatype - !Valid normalization types are: - !H5T_NORM_IMPLIED_F(0),MSB of mantissa is not - !stored, always 1, H5T_NORM_MSBSET_F(1), MSB of - !mantissa is always 1, H5T_NORM_NONE_F(2) - !Mantissa is not normalize - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_norm_c(type_id, norm) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_NORM_C'::h5tset_norm_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: norm - END FUNCTION h5tset_norm_c - END INTERFACE - - hdferr = h5tset_norm_c(type_id, norm) - END SUBROUTINE h5tset_norm_f - -! -!****s* H5T/h5tget_inpad_f -! -! NAME -! h5tget_inpad_f -! -! PURPOSE -! Retrieves the internal padding type for unused bits -! in floating-point datatypes. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! padtype - padding type for unused bits -! Possible values of padding type are: -! H5T_PAD_ZERO_F = 0 -! H5T_PAD_ONE_F = 1 -! H5T_PAD_BACKGROUND_F = 2 -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_inpad_f(type_id, padtype, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: padtype ! padding type for unused bits - ! in floating-point datatypes. - ! Possible values of padding type are: - ! H5T__PAD_ZERO_F = 0 - ! H5T__PAD_ONE_F = 1 - ! H5T__PAD_BACKGROUND_F = 2 - - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_inpad_c(type_id, padtype) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_INPAD_C'::h5tget_inpad_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: padtype - END FUNCTION h5tget_inpad_c - END INTERFACE - - hdferr = h5tget_inpad_c(type_id, padtype) - END SUBROUTINE h5tget_inpad_f - -! -!****s* H5T/h5tset_inpad_f -! -! NAME -! h5tset_inpad_f -! -! PURPOSE -! Fills unused internal floating point bits. -! -! INPUTS -! type_id - datatype identifier -! padtype - padding type for unused bits -! Possible values of padding type are: -! H5T_PAD_ZERO_F = 0 -! H5T_PAD_ONE_F = 1 -! H5T_PAD_BACKGROUND_F = 2 -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_inpad_f(type_id, padtype, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: padtype ! padding type for unused bits - ! in floating-point datatypes. - ! Possible values of padding type are: - ! H5T__PAD_ZERO_F = 0 - ! H5T__PAD_ONE_F = 1 - ! H5T__PAD_BACKGROUND_F = 2 - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_inpad_c(type_id, padtype) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_INPAD_C'::h5tset_inpad_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: padtype - END FUNCTION h5tset_inpad_c - END INTERFACE - - hdferr = h5tset_inpad_c(type_id, padtype) - END SUBROUTINE h5tset_inpad_f - -! -!****s* H5T/h5tget_cset_f -! -! NAME -! h5tget_cset_f -! -! PURPOSE -! Retrieves the character set type of a string datatype. -! -! INPUTS -! type_id - Datatype identifier -! OUTPUTS -! cset - Character set type of a string datatype -! Possible values are: -! H5T_CSET_ASCII_F = 0 -! H5T_CSET_UTF8_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_cset_f(type_id, cset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: cset ! character set type of a string datatype - ! Possible values are: - ! H5T_CSET_ASCII_F = 0 - ! H5T_CSET_UTF8_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_cset_c(type_id, cset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_CSET_C'::h5tget_cset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: cset - END FUNCTION h5tget_cset_c - END INTERFACE - - hdferr = h5tget_cset_c(type_id, cset) - END SUBROUTINE h5tget_cset_f - -! -!****s* H5T/h5tset_cset_f -! -! NAME -! h5tset_cset_f -! -! PURPOSE -! Sets character set to be used. -! -! INPUTS -! type_id - datatype identifier -! cset - character set type of a string datatype -! Possible values are: -! H5T_CSET_ASCII_F = 0 -! H5T_CSET_UTF8_F -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_cset_f(type_id, cset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: cset !character set type of a string datatype - ! Possible values of padding type are: - ! H5T_CSET_ASCII_F = 0 - ! H5T_CSET_UTF8_F - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_cset_c(type_id, cset) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_CSET_C'::h5tset_cset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: cset - END FUNCTION h5tset_cset_c - END INTERFACE - - hdferr = h5tset_cset_c(type_id, cset) - END SUBROUTINE h5tset_cset_f - -! -!****s* H5T/h5tget_strpad_f -! -! NAME -! h5tget_strpad_f -! -! PURPOSE -! Retrieves the storage mechanism for a string datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! strpad - storage method for a string datatype -! Possible values are: -! H5T_STR_NULLTERM_F, -! H5T_STR_NULLPAD_F, -! H5T_STR_SPACEPAD_F -! H5T_STR_ERROR_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_strpad_f(type_id, strpad, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: strpad - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_strpad_c(type_id, strpad) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_STRPAD_C'::h5tget_strpad_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: strpad - END FUNCTION h5tget_strpad_c - END INTERFACE - - hdferr = h5tget_strpad_c(type_id, strpad) - END SUBROUTINE h5tget_strpad_f - -! -!****s* H5T/h5tset_strpad_f -! -! NAME -! h5tset_strpad_f -! -! PURPOSE -! Defines the storage mechanism for character strings. -! -! INPUTS -! type_id - datatype identifier -! strpad - storage method for a string datatype -! Possible values are: -! H5T_STR_NULLTERM_F, -! H5T_STR_NULLPAD_F, -! H5T_STR_SPACEPAD_F -! H5T_STR_ERROR_F -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_strpad_f(type_id, strpad, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: strpad ! string padding method for a string datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tset_strpad_c(type_id, strpad) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_STRPAD_C'::h5tset_strpad_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: strpad - END FUNCTION h5tset_strpad_c - END INTERFACE - - hdferr = h5tset_strpad_c(type_id, strpad) - END SUBROUTINE h5tset_strpad_f - -! -!****s* H5T/h5tget_nmembers_f -! -! NAME -! h5tget_nmembers_f -! -! PURPOSE -! Retrieves the number of fields in a compound datatype. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! num_members - number of members -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tget_nmembers_f(type_id, num_members, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: num_members !number of fields in a compound datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_nmembers_c(type_id, num_members) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_NMEMBERS_C'::h5tget_nmembers_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: num_members - END FUNCTION h5tget_nmembers_c - END INTERFACE - - hdferr = h5tget_nmembers_c(type_id, num_members) - END SUBROUTINE h5tget_nmembers_f - -! -!****s* H5T/h5tget_member_name_f -! -! NAME -! h5tget_member_name_f -! -! PURPOSE -! Retrieves the name of a field of a compound datatype. -! -! INPUTS -! type_id - datatype identifier -! index - filed index (0-based) -! OUTPUTS -! member_name - buffer to hold member's name -! namelen - name length -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_member_name_f(type_id, index, member_name, namelen, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: index !Field index (0-based) of the field name to retrieve - CHARACTER(LEN=*), INTENT(OUT) :: member_name !name of a field of - !a compound datatype - INTEGER, INTENT(OUT) :: namelen ! Length of the name - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_member_name_c(type_id, index, member_name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_NAME_C'::h5tget_member_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: member_name - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: index - CHARACTER(LEN=*), INTENT(OUT) :: member_name - INTEGER, INTENT(OUT) :: namelen - END FUNCTION - END INTERFACE - - hdferr = h5tget_member_name_c(type_id, index, member_name, namelen) - END SUBROUTINE h5tget_member_name_f - -! -!****s* H5T/h5tget_member_offset_f -! -! NAME -! h5tget_member_offset_f -! -! PURPOSE -! Retrieves the offset of a field of a compound datatype. -! -! INPUTS -! type_id - datatype identifier -! member_no - number of the field -! OUTPUTS -! offset - byte offset of the requested field -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_member_offset_f(type_id, member_no, offset, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: member_no !Number of the field - !whose offset is requested - INTEGER(SIZE_T), INTENT(OUT) :: offset !byte offset of the beginning of the field - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_member_offset_c(type_id, member_no, offset ) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_OFFSET_C'::h5tget_member_offset_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: member_no - INTEGER(SIZE_T), INTENT(OUT) :: offset - END FUNCTION h5tget_member_offset_c - END INTERFACE - - hdferr = h5tget_member_offset_c(type_id, member_no, offset ) - END SUBROUTINE h5tget_member_offset_f -! -!****s* H5T/h5tget_member_index_f -! -! NAME -! h5tget_member_index_f -! -! PURPOSE -! Retrieves the index of a compound or enumeration datatype member. -! -! INPUTS -! type_id - datatype identifier -! name - name of the field or member whose index to -! to be retrieved from the datatype. -! OUTPUTS -! index - 0-based index of the filed or member (0 to N-1) -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 26, 2002 -! -! SOURCE - SUBROUTINE h5tget_member_index_f(type_id, name, index, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Field or member name - INTEGER, INTENT(OUT) :: index ! Field or member index - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen ! Name length - - INTERFACE - INTEGER FUNCTION h5tget_member_index_c(type_id, name, namelen, index) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_INDEX_C'::h5tget_member_index_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference ::name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: namelen - INTEGER, INTENT(OUT) :: index - END FUNCTION h5tget_member_index_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tget_member_index_c(type_id, name, namelen, index) - END SUBROUTINE h5tget_member_index_f - - -! !$! -! !$!****s* H5T/h5tget_member_dim_f -! !$! -! !$! NAME -! !$! h5tget_member_dim_f -! !$! -! !$! PURPOSE -! !$! This function is not supported in hdf5-1.4.* -! !$! -! !$! INPUTS -! !$! OUTPUTS -! !$! hdferr: - error code -! !$! Success: 0 -! !$! Failure: -1 -! !$! -! !$! AUTHOR -! !$! Elena Pourmal -! !$! August 12, 1999 -! !$! -! !$! HISTORY -! !$! Explicit Fortran interfaces were added for -! !$! called C functions (it is needed for Windows -! !$! port). March 7, 2001 -! !$! -! !$! SOURCE -! !$! SUBROUTINE h5tget_member_dims_f(type_id, field_idx,dims, field_dims, perm, hdferr) -! !$! -! !$! IMPLICIT NONE -! !$! INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier -! !$! INTEGER, INTENT(IN) :: field_idx !Field index (0-based) of -! !$! !field_dims, perm) -! !$! INTEGER, INTENT(OUT) :: dims !number of dimensions of the field -! !$! -! !$! INTEGER(SIZE_T),DIMENSION(*), INTENT(OUT) :: field_dims !buffer to store the -! !$! !dimensions of the field -! !$! INTEGER, DIMENSION(*), INTENT(OUT) :: perm !buffer to store the -! !$! !permutation vector of the field -! !$! INTEGER, INTENT(OUT) :: hdferr ! Error code -! !$!*****! -! !$! INTEGER, EXTERNAL :: h5tget_member_dims_c -! !$! hdferr = h5tget_member_dims_c(type_id, field_idx, dims, field_dims, perm) -! !$! -! !$! END SUBROUTINE h5tget_member_dims_f - - -!****s* H5T/h5tget_array_dims_f -! -! NAME -! h5tget_array_dims_f -! -! PURPOSE -! Returns sizes of array dimensions. -! -! INPUTS -! type_id - array datatype identifier -! OUTPUTS -! dims - buffer to store array datatype dimensions -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_array_dims_f(type_id, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Array datatype identifier - INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) :: dims !buffer to store array datatype - ! dimensions - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_array_dims_c(type_id, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_ARRAY_DIMS_C'::h5tget_array_dims_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HSIZE_T),DIMENSION(*), INTENT(OUT) :: dims - END FUNCTION h5tget_array_dims_c - END INTERFACE - - hdferr = h5tget_array_dims_c(type_id, dims) - - END SUBROUTINE h5tget_array_dims_f - -! -!****s* H5T/h5tget_array_ndims_f -! -! NAME -! h5tget_array_ndims_f -! -! PURPOSE -! Returns the rank of an array datatype. -! -! INPUTS -! type_id - array datatype identifier -! OUTPUTS -! ndims - number of array dimensions -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_array_ndims_f(type_id, ndims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Array datatype identifier - INTEGER, INTENT(OUT) :: ndims ! number of array dimensions - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_array_ndims_c(type_id, ndims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_ARRAY_NDIMS_C'::h5tget_array_ndims_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(OUT) :: ndims - END FUNCTION h5tget_array_ndims_c - END INTERFACE - - hdferr = h5tget_array_ndims_c(type_id, ndims) - - END SUBROUTINE h5tget_array_ndims_f - -! -!****s* H5T/h5tget_super_f -! -! NAME -! h5tget_super_f -! -! PURPOSE -! Returns the base datatype from which a datatype is derived. -! -! INPUTS -! type_id - datatype identifier -! OUTPUTS -! base_type_id - identifier of the base type -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_super_f(type_id, base_type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! datatype identifier - INTEGER(HID_T), INTENT(OUT) :: base_type_id ! identifier of the datatype - ! from which datatype (type_id) was derived - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_super_c(type_id, base_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_SUPER_C'::h5tget_super_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(OUT) :: base_type_id - END FUNCTION h5tget_super_c - END INTERFACE - - hdferr = h5tget_super_c(type_id, base_type_id) - - END SUBROUTINE h5tget_super_f - -! -!****s* H5T/h5tget_member_type_f -! -! NAME -! h5tget_member_type_f -! -! PURPOSE -! Returns the datatype of the specified member. -! -! INPUTS -! type_id - compound datatype identifier -! field_idx - field index (0-based) -! -! OUTPUTS -! datatype - idnetifier of the member's datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_member_type_f(type_id, field_idx, datatype, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: field_idx !Field index (0-based) of the field type to retrieve - INTEGER(HID_T), INTENT(OUT) :: datatype !identifier of a copy of - !the datatype of the field - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_member_type_c(type_id, field_idx , datatype) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_TYPE_C'::h5tget_member_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: field_idx - INTEGER(HID_T), INTENT(OUT) :: datatype - END FUNCTION h5tget_member_type_c - END INTERFACE - - hdferr = h5tget_member_type_c(type_id, field_idx , datatype) - END SUBROUTINE h5tget_member_type_f - -! -!****s* H5T/h5tcreate_f -! -! NAME -! h5tcreate_f -! -! PURPOSE -! Creates a new datatype. -! -! INPUTS -! class - Datatype class can be one of: -! H5T_COMPOUND_F -! H5T_ENUM_F -! H5T_OPAQUE_F -! H5T_STRING_F -! -! size - Size of the datatype. -! OUTPUTS -! type_id - Datatype identifier. -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tcreate_f(class, size, type_id, hdferr) - IMPLICIT NONE - INTEGER , INTENT(IN) :: class - INTEGER(SIZE_T), INTENT(IN) :: size - INTEGER(HID_T) , INTENT(OUT) :: type_id - INTEGER , INTENT(OUT) :: hdferr -!***** - INTERFACE - INTEGER FUNCTION h5tcreate_c(class, size, type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCREATE_C'::h5tcreate_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: class - INTEGER(SIZE_T), INTENT(IN) :: size - INTEGER(HID_T), INTENT(OUT) :: type_id - END FUNCTION h5tcreate_c - END INTERFACE - - hdferr = h5tcreate_c(class, size, type_id) - END SUBROUTINE h5tcreate_f - -! -!****s* H5T/h5tinsert_f -! -! NAME -! h5tinsert_f -! -! PURPOSE -! Adds a new member to a compound datatype. -! -! INPUTS -! type_id - compound dattype identifier -! name - name of the field to insert -! offset - start of the member in an instance of -! the compound datatype -! field_id - datatype identifier of the field to insert -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tinsert_f(type_id, name, offset, field_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(IN) :: name !Name of the field to insert - INTEGER(SIZE_T), INTENT(IN) :: offset !start of the member in an instance of - !the compound datatype - INTEGER(HID_T), INTENT(IN) :: field_id !datatype identifier of the new member - - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5tinsert_c(type_id, name, namelen, offset, field_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TINSERT_C'::h5tinsert_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER(SIZE_T), INTENT(IN) :: offset - INTEGER(HID_T), INTENT(IN) :: field_id - INTEGER :: namelen - END FUNCTION h5tinsert_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tinsert_c(type_id, name, namelen, offset, field_id ) - END SUBROUTINE h5tinsert_f - -! -!****s* H5T/h5tpack_f -! -! NAME -! h5tpack_f -! -! PURPOSE -! Recursively removes padding from within a compound datatype. -! -! INPUTS -! type_id - compound datatype identifier -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tpack_f(type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tpack_c(type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TPACK_C'::h5tpack_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - END FUNCTION h5tpack_c - END INTERFACE - - hdferr = h5tpack_c(type_id) - END SUBROUTINE h5tpack_f - -! !$! -! !$!****s* H5T/h5tinsert_array_f -! !$! -! !$! NAME -! !$! h5tinsert_array_f -! !$! -! !$! PURPOSE -! !$! This function is not available on hdf5-1.4.* -! !$! -! !$! INPUTS -! !$! OUTPUTS -! !$! hdferr: - error code -! !$! Success: 0 -! !$! Failure: -1 -! !$! -! !$! AUTHOR -! !$! Elena Pourmal -! !$! August 12, 1999 -! !$! -! !$! HISTORY -! !$! Explicit Fortran interfaces were added for -! !$! called C functions (it is needed for Windows -! !$! port). March 7, 2001 -! !$! SOURCE -! SUBROUTINE h5tinsert_array_f(parent_id,name,offset, ndims, dims, member_id, hdferr, perm) -! IMPLICIT NONE -! INTEGER(HID_T), INTENT(IN) :: parent_id ! identifier of the parent compound datatype -! CHARACTER(LEN=*), INTENT(IN) :: name !Name of the new member -! INTEGER(SIZE_T), INTENT(IN) :: offset !Offset to start of new member -! !within compound datatype -! INTEGER, INTENT(IN) :: ndims !Dimensionality of new member. -! !Valid values are 0 (zero) through 4 (four) -! INTEGER(SIZE_T), DIMENSION(*), INTENT(IN) :: dims !Size of new member array -! INTEGER(HID_T), INTENT(IN) :: member_id ! identifier of the datatype of the new member -! INTEGER, INTENT(OUT) :: hdferr ! Error code -! !*****! -! INTEGER, DIMENSION(*), OPTIONAL, INTENT(IN) :: perm -! !Pointer to buffer to store -! !the permutation vector of the field -! INTEGER :: namelen, sizeofperm -! INTEGER, EXTERNAL :: h5tinsert_array_c, h5tinsert_array_c2 -! namelen = LEN(name) -! if (present(perm)) then -! hdferr = h5tinsert_array_c(parent_id, name, namelen, offset, ndims,dims, member_id, perm) -! else -! hdferr = h5tinsert_array_c2(parent_id, name, namelen, offset, ndims,dims, member_id) -! end if -! -! END SUBROUTINE h5tinsert_array_f - -! -!****s* H5T/h5tarray_create_f -! -! NAME -! h5tarray_create_f -! -! PURPOSE -! Creates an array datatype object. -! -! INPUTS -! base_id - datatype identifier for the array -! base datatype -! rank - rank of the array -! dims - array dimension sizes -! OUTPUTS -! type_id - array datatype identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tarray_create_f(base_id, rank, dims, type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: base_id ! identifier of array base datatype - INTEGER, INTENT(IN) :: rank ! Rank of the array - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims !Sizes of each array dimension - INTEGER(HID_T), INTENT(OUT) :: type_id ! identifier of the array datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tarray_create_c(base_id, rank, dims, type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TARRAY_CREATE_C'::h5tarray_create_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: base_id - INTEGER, INTENT(IN) :: rank - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims - INTEGER(HID_T), INTENT(OUT) :: type_id - END FUNCTION h5tarray_create_c - END INTERFACE - - hdferr = h5tarray_create_c(base_id, rank, dims, type_id) - - END SUBROUTINE h5tarray_create_f - -! -!****s* H5T/h5tenum_create_f -! -! NAME -! h5tenum_create_f -! -! PURPOSE -! Creates a new enumeration datatype. -! -! INPUTS -! parent_id - datatype identifier for base datatype -! OUTPUTS -! new_type_id - datatype identifier for the enumeration datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tenum_create_f(parent_id, new_type_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: parent_id ! Datatype identifier for - ! the base datatype - INTEGER(HID_T), INTENT(OUT) :: new_type_id - !datatype identifier for the - ! new enumeration datatype - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tenum_create_c(parent_id, new_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENUM_CREATE_C'::h5tenum_create_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: parent_id - INTEGER(HID_T), INTENT(OUT) :: new_type_id - END FUNCTION h5tenum_create_c - END INTERFACE - - hdferr = h5tenum_create_c(parent_id, new_type_id) - END SUBROUTINE h5tenum_create_f -! -!****s* H5T/h5tenum_nameof_f -! -! NAME -! h5tenum_nameof_f -! -! PURPOSE -! Returns the symbol name corresponding to a specified -! member of an enumeration datatype. -! -! INPUTS -! type_id - datatype identifier -! value - value of the enumeration datatype -! namelen - name buffer size -! OUTPUTS -! name - buffer to hold symbol name -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! NOTE -! According to the standard: Because an INTENT(OUT) variable is considered undefined -! on entry to the procedure, any default initialization specified for its type will -! be applied. So we need to blank out the "name" to be portable and eliminate any -! characters the "name' may contain upon entry, depending on compiler implementation. -! SOURCE - SUBROUTINE h5tenum_nameof_f(type_id, value, namelen, name, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(OUT) :: name !Name of the enumeration datatype. - INTEGER(SIZE_T), INTENT(IN) :: namelen !length of the name - INTEGER, INTENT(IN) :: value !value of the enumeration datatype. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tenum_nameof_c(type_id, value, name, namelen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENUM_NAMEOF_C'::h5tenum_nameof_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(OUT) :: name - INTEGER(SIZE_T), INTENT(IN) :: namelen - INTEGER, INTENT(IN) :: value - END FUNCTION h5tenum_nameof_c - END INTERFACE - - name(1:LEN(name)) = ' ' - - hdferr = h5tenum_nameof_c(type_id, value, name, namelen) - END SUBROUTINE h5tenum_nameof_f - -! -!****s* H5T/h5tenum_valuof_f -! -! NAME -! h5tenum_valuof_f -! -! PURPOSE -! Returns the value corresponding to a specified -! member of an enumeration datatype. -! -! INPUTS -! type_id - datatype identifier -! name - symbol name -! OUTPUTS -! value - value of the enumeration datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! -! SOURCE - SUBROUTINE h5tenum_valueof_f(type_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(IN) :: name !Name of the enumeration datatype. - INTEGER, INTENT(OUT) :: value !value of the enumeration datatype. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5tenum_valueof_c(type_id, name, namelen, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENUM_VALUEOF_C'::h5tenum_valueof_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: namelen - INTEGER, INTENT(OUT) :: value - END FUNCTION h5tenum_valueof_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tenum_valueof_c(type_id, name, namelen, value) - END SUBROUTINE h5tenum_valueof_f - -! -!****s* H5T/h5tget_member_value_f -! -! NAME -! h5tget_member_value_f -! -! PURPOSE -! Returns the value of an enumeration datatype member. -! -! INPUTS -! type_id - datatype identifier -! member_no - number of the enumeration datatype member -! OUTPUTS -! value - value of the enumeration datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_member_value_f(type_id, member_no, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: member_no !Number of the enumeration datatype member - INTEGER, INTENT(OUT) :: value !value of the enumeration datatype. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tget_member_value_c(type_id, member_no, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_VALUE_C'::h5tget_member_value_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: member_no - INTEGER, INTENT(OUT) :: value - END FUNCTION - END INTERFACE - - hdferr = h5tget_member_value_c(type_id, member_no, value) - END SUBROUTINE h5tget_member_value_f - -! -!****s* H5T/h5tset_tag_f -! -! NAME -! h5tset_tag_f -! -! PURPOSE -! Tags an opaque datatype. -! -! INPUTS -! type_id - identifier for opaque datatype -! tag - unique ASCII string with which the opaque -! datatype is to be tagged. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tset_tag_f(type_id, tag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(IN) :: tag !Unique ASCII string with which - !the opaque datatype is to be tagged - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: taglen - - INTERFACE - INTEGER FUNCTION h5tset_tag_c(type_id, tag, taglen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TSET_TAG_C'::h5tset_tag_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: tag - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: tag - INTEGER :: taglen - END FUNCTION h5tset_tag_c - END INTERFACE - - taglen = LEN(tag) - hdferr = h5tset_tag_c(type_id, tag, taglen) - END SUBROUTINE h5tset_tag_f - -! -!****s* H5T/h5tget_tag_f -! -! NAME -! h5tget_tag_f -! -! PURPOSE -! Gets the tag associated with an opaque datatype. -! -! INPUTS -! type_id - identifier for opaque datatype -! OUTPUTS -! tag - unique ASCII string associated with opaque -! datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tget_tag_f(type_id, tag,taglen, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(OUT) :: tag ! Unique ASCII string with which - ! the opaque datatype is to be tagged - INTEGER, INTENT(OUT) :: taglen ! Length of tag - INTEGER(SIZE_T) :: tag_size ! Declared character length of tab - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_tag_c(type_id, tag, tag_size, taglen) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_TAG_C'::h5tget_tag_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: tag - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(OUT) :: tag - INTEGER(SIZE_T), INTENT(IN) :: tag_size - INTEGER, INTENT(OUT) :: taglen - END FUNCTION h5tget_tag_c - END INTERFACE - - tag_size = LEN(tag) - - hdferr = h5tget_tag_c(type_id, tag, tag_size, taglen ) - END SUBROUTINE h5tget_tag_f - -! -!****s* H5T/h5tvlen_create_f -! -! NAME -! h5tvlen_create_f -! -! PURPOSE -! Creates a new variable-length datatype. -! -! INPUTS -! type_id - identifier iof base datatype -! OUTPUTS -! vltype_id - identifier for VL datatype -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! Wednesday, October 23, 2002 -! -! NOTES -! Only basic Fortran base datatypes are supported -! -! SOURCE - SUBROUTINE h5tvlen_create_f(type_id, vltype_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER(HID_T), INTENT(OUT) :: vltype_id ! VL datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tvlen_create_c(type_id, vltype_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TVLEN_CREATE_C'::h5tvlen_create_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER(HID_T), INTENT(OUT) :: vltype_id - END FUNCTION h5tvlen_create_c - END INTERFACE - - hdferr = h5tvlen_create_c(type_id, vltype_id) - END SUBROUTINE h5tvlen_create_f - -! -!****s* H5T/h5tis_variable_str_f -! -! NAME -! h5tis_variable_str_f -! -! PURPOSE -! Determines whether a dattype is a variable string. -! -! INPUTS -! type_id - datartpe identifier -! OUTPUTS -! status - flag to indicate if datatype -! is a variable string -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! SOURCE - SUBROUTINE h5tis_variable_str_f(type_id, status, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - LOGICAL, INTENT(OUT) :: status ! Flag, idicates if datatype - ! is a variable string or not ( TRUE or - ! FALSE) - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: flag ! "TRUE/FALSE/ERROR from C" - - INTERFACE - INTEGER FUNCTION h5tis_variable_str_c(type_id, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TIS_VARIABLE_STR_C'::h5tis_variable_str_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER :: flag - END FUNCTION h5tis_variable_str_c - END INTERFACE - - hdferr = h5tis_variable_str_c(type_id, flag) - status = .TRUE. - if (flag .EQ. 0) status = .FALSE. - - END SUBROUTINE h5tis_variable_str_f - -! -!****s* H5T/h5tget_member_class_f -! -! NAME -! h5tget_member_class_f -! -! PURPOSE -! Returns datatype class of compound datatype member. -! -! INPUTS -! type_id - datartpe identifier -! member_no - index of compound datatype member -! OUTPUTS -! class - class type for compound dadtype member -! Valid classes: -! H5T_NO_CLASS_F (error) -! H5T_INTEGER_F -! H5T_FLOAT_F -! H5T_TIME_F -! H5T_STRING_F -! H5T_BITFIELD_F -! H5T_OPAQUE_F -! H5T_COMPOUND_F -! H5T_REFERENCE_F -! H5T_ENUM_F -! H5T_VLEN_F -! H5T_ARRAY_F -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! April 6, 2005 -! -! SOURCE - SUBROUTINE h5tget_member_class_f(type_id, member_no, class, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - INTEGER, INTENT(IN) :: member_no ! Member number - INTEGER, INTENT(OUT) :: class ! Member class - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tget_member_class_c(type_id, member_no, class) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_MEMBER_CLASS_C'::h5tget_member_class_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: type_id - INTEGER, INTENT(IN) :: member_no - INTEGER, INTENT(OUT) :: class - END FUNCTION h5tget_member_class_c - END INTERFACE - - hdferr = h5tget_member_class_c(type_id, member_no, class) - - END SUBROUTINE h5tget_member_class_f - -! -!****s* H5T/h5tcommit_anon_f -! -! NAME -! h5tcommit_anon_f -! -! PURPOSE -! Commits a transient datatype to a file, -! creating a new named datatype, -! but does not link it into the file structure. -! -! INPUTS -! loc_id - A file or group identifier specifying the file -! in which the new named datatype is to be created. -! dtype_id - A datatype identifier. -! -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! OPTIONAL PARAMETERS -! tcpl_id - A datatype creation property list identifier. -! (H5P_DEFAULT_F for the default property list.) -! tapl_id - A datatype access property list identifier. -! should always be passed as the value H5P_DEFAULT_F. -! -! AUTHOR -! M. Scot Breitenfeld -! February 25, 2008 -! -! SOURCE - SUBROUTINE h5tcommit_anon_f(loc_id, dtype_id, hdferr, tcpl_id, tapl_id) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: loc_id ! A file or group identifier specifying - ! the file in which the new named datatype - ! is to be created. - INTEGER(HID_T), INTENT(IN) :: dtype_id ! Datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tcpl_id ! A datatype creation property - ! list identifier. - ! (H5P_DEFAULT_F for the default property list.) - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: tapl_id ! A datatype access property list identifier. - ! should always be passed as the value H5P_DEFAULT_F. -!***** - INTEGER(HID_T) :: tcpl_id_default - INTEGER(HID_T) :: tapl_id_default - - INTERFACE - INTEGER FUNCTION h5tcommit_anon_c(loc_id, dtype_id, & - tcpl_id_default, tapl_id_default) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCOMMIT_ANON_C'::h5tcommit_anon_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: loc_id - INTEGER(HID_T), INTENT(IN) :: dtype_id - INTEGER(HID_T) :: tcpl_id_default - INTEGER(HID_T) :: tapl_id_default - END FUNCTION h5tcommit_anon_c - END INTERFACE - - tcpl_id_default = H5P_DEFAULT_F - tapl_id_default = H5P_DEFAULT_F - - IF(PRESENT(tcpl_id)) tcpl_id_default = tcpl_id - IF(PRESENT(tapl_id)) tapl_id_default = tapl_id - - hdferr = h5tcommit_anon_c(loc_id, dtype_id, & - tcpl_id_default, tapl_id_default ) - - END SUBROUTINE h5tcommit_anon_f - -! -!****s* H5T/h5tcommitted_f -! -! NAME -! h5tcommitted_f -! -! PURPOSE -! Determines whether a datatype is a named type or a transient type. -! -! INPUTS -! dtype_id - A datatype identifier. -! -! OUTPUTS -! committed - .TRUE., if the datatype has been committed -! .FALSE., if the datatype has not been committed. -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! February 25, 2008 -! -! SOURCE - SUBROUTINE h5tcommitted_f(dtype_id, committed, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dtype_id ! A datatype identifier - LOGICAL, INTENT(OUT) :: committed ! .TRUE., if the datatype has been committed - !.FALSE., if the datatype has not been committed. - INTEGER, INTENT(OUT) :: hdferr ! Error code: -! Success: 0 -! Failure: -1 -!***** - INTERFACE - INTEGER FUNCTION h5tcommitted_c(dtype_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCOMMITTED_C'::h5tcommitted_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dtype_id - END FUNCTION h5tcommitted_c - END INTERFACE - - hdferr = h5tcommitted_c(dtype_id) - - IF(hdferr.GT.0)THEN - committed = .TRUE. - hdferr = 0 - ELSE IF(hdferr.EQ.0)THEN - committed = .FALSE. - hdferr = 0 - ELSE - hdferr = -1 - ENDIF - - - END SUBROUTINE h5tcommitted_f - -! -!****s* H5T/H5Tdecode_f -! -! NAME -! H5Tdecode_f -! -! PURPOSE -! Decode a binary object description of data type and return a new object handle. -! INPUTS -! buf - Buffer for the data space object to be decoded. -! obj_id - Object ID -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! April 9, 2008 -! -! SOURCE - SUBROUTINE h5tdecode_f(buf, obj_id, hdferr) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: buf ! Buffer for the data space object to be decoded. - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5tdecode_c(buf, obj_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TDECODE_C'::h5tdecode_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - CHARACTER(LEN=*), INTENT(IN) :: buf - INTEGER(HID_T), INTENT(OUT) :: obj_id ! Object ID - END FUNCTION h5tdecode_c - END INTERFACE - - hdferr = h5tdecode_c(buf, obj_id) - - END SUBROUTINE h5tdecode_f - -! -!****s* H5T/H5Tencode_f -! -! NAME -! H5Tencode_f -! -! PURPOSE -! Encode a data type object description into a binary buffer. -! -! INPUTS -! obj_id - Identifier of the object to be encoded. -! buf - Buffer for the object to be encoded into. -! nalloc - The size of the allocated buffer. -! OUTPUTS -! nalloc - The size of the buffer needed. -! hdferr - Returns 0 if successful and -1 if fails. -! -! AUTHOR -! M. Scot Breitenfeld -! April 9, 2008 -! SOURCE - SUBROUTINE h5tencode_f(obj_id, buf, nalloc, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: obj_id ! Identifier of the object to be encoded. - CHARACTER(LEN=*), INTENT(OUT) :: buf ! Buffer for the object to be encoded into. - INTEGER(SIZE_T), INTENT(INOUT) :: nalloc ! The size of the allocated buffer. - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5tencode_c(buf, obj_id, nalloc) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENCODE_C'::h5tencode_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: buf - INTEGER(HID_T), INTENT(IN) :: obj_id - CHARACTER(LEN=*), INTENT(OUT) :: buf - INTEGER(SIZE_T), INTENT(INOUT) :: nalloc - END FUNCTION h5tencode_c - END INTERFACE - - hdferr = h5tencode_c(buf, obj_id, nalloc) - - END SUBROUTINE h5tencode_f - -! -!****s* H5T/h5tget_create_plist_f -! -! NAME -! h5tget_create_plist_f -! -! PURPOSE -! Returns a copy of a datatype creation property list. -! -! INPUTS -! dtype_id - Datatype identifier -! OUTPUTS -! dtpl_id - Datatype property list identifier -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! April 9, 2008 -! -! SOURCE - SUBROUTINE h5tget_create_plist_f(dtype_id, dtpl_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dtype_id ! Datatype identifier - INTEGER(HID_T), INTENT(OUT) :: dtpl_id ! Datatype property list identifier. - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5tget_create_plist_c(dtype_id, dtpl_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_CREATE_PLIST_C'::h5tget_create_plist_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dtype_id - INTEGER(HID_T), INTENT(OUT) :: dtpl_id - END FUNCTION h5tget_create_plist_c - END INTERFACE - - hdferr = h5tget_create_plist_c(dtype_id, dtpl_id) - END SUBROUTINE h5tget_create_plist_f - -! -!****s* H5T/h5tcompiler_conv_f -! -! NAME -! h5tcompiler_conv_f -! -! PURPOSE -! Check whether the library’s default conversion is hard conversion.R -! -! INPUTS -! src_id - Identifier for the source datatype. -! dst_id - Identifier for the destination datatype. -! OUTPUTS -! flag - TRUE for compiler conversion, FALSE for library conversion -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! April 9, 2008 -! SOURCE - SUBROUTINE h5tcompiler_conv_f( src_id, dst_id, flag, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: src_id ! Identifier for the source datatype. - INTEGER(HID_T), INTENT(IN) :: dst_id ! Identifier for the destination datatype. - LOGICAL, INTENT(OUT) :: flag ! .TRUE. for compiler conversion, .FALSE. for library conversion - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTEGER :: c_flag - - INTERFACE - INTEGER FUNCTION h5tcompiler_conv_c(src_id, dst_id, c_flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TCOMPILER_CONV_C'::h5tcompiler_conv_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: src_id - INTEGER(HID_T), INTENT(IN) :: dst_id - INTEGER :: c_flag - END FUNCTION h5tcompiler_conv_c - END INTERFACE - - hdferr = h5tcompiler_conv_c(src_id, dst_id, c_flag) - - flag = .FALSE. - IF(c_flag .GT. 0) flag = .TRUE. - - END SUBROUTINE h5tcompiler_conv_f - -! -!****s* H5T/h5tget_native_type_f -! -! NAME -! h5tget_native_type_f -! -! PURPOSE -! Returns the native datatype of a specified datatype. -! -! INPUTS -! dtype_id - Datatype identifier for the dataset datatype. -! -! direction - Direction of search: -! H5T_DIR_DEFAULT = 0, /*default direction is inscendent */ -! H5T_DIR_ASCEND = 1, /*in inscendent order */ -! H5T_DIR_DESCEND = 2 /*in descendent order */ -! * NOTE: In C it is defined as a structure: H5T_direction_t -! -! OUTPUTS -! native_dtype_id - The native datatype identifier for the specified dataset datatype -! hdferr - Returns 0 if successful and -1 if fails -! AUTHOR -! M. Scot Breitenfeld -! June 18, 2008 -! SOURCE - SUBROUTINE h5tget_native_type_f(dtype_id, direction, native_dtype_id, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dtype_id ! Datatype identifier - INTEGER, INTENT(IN) :: direction ! Direction of search: - ! H5T_DIR_ASCEND_F = 1 in inscendent order - ! H5T_DIR_DESCEND_F = 2 in descendent order - INTEGER(HID_T), INTENT(OUT) :: native_dtype_id ! The native datatype identifier - INTEGER, INTENT(OUT) :: hdferr ! Error code: - ! 0 on success and -1 on failure -!***** - INTERFACE - INTEGER FUNCTION h5tget_native_type_c(dtype_id, direction, native_dtype_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TGET_NATIVE_TYPE_C'::h5tget_native_type_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dtype_id - INTEGER, INTENT(IN) :: direction - INTEGER(HID_T), INTENT(OUT) :: native_dtype_id - END FUNCTION h5tget_native_type_c - END INTERFACE - - hdferr = h5tget_native_type_c(dtype_id, direction, native_dtype_id) - END SUBROUTINE h5tget_native_type_f - -END MODULE H5T diff --git a/fortran/src/H5Tff_F03.f90 b/fortran/src/H5Tff_F03.f90 deleted file mode 100644 index 2c9f212..0000000 --- a/fortran/src/H5Tff_F03.f90 +++ /dev/null @@ -1,223 +0,0 @@ -!****h* ROBODoc/H5T (F03) -! -! NAME -! H5T_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 and Fortran 2003 interfaces for H5T functions. -! It contains the same functions as H5Tff_F90.f90 but includes the -! Fortran 2003 functions and the interface listings. This file will be compiled -! instead of H5Tff_F90.f90 if Fortran 2003 functions are enabled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5T function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5T_PROVISIONAL - - USE H5GLOBAL - USE, INTRINSIC :: ISO_C_BINDING - -!****t* H5T (F03)/hvl_t -! Fortran2003 Derived Type: - TYPE hvl_t - INTEGER(size_t) :: len ! Length of VL data (in base type units) - TYPE(C_PTR) :: p ! Pointer to VL data - END TYPE hvl_t - -!***** - - INTERFACE h5tenum_insert_f - MODULE PROCEDURE h5tenum_insert_f03 - MODULE PROCEDURE h5tenum_insert_f90 - END INTERFACE - -CONTAINS - -!****s* H5T (F03)/H5Tconvert_f_F03 -! -! NAME -! H5Tconvert_f -! -! PURPOSE -! Converts data from between specified datatypes. -! -! Inputs: -! src_id - Identifier for the source datatype. -! dst_id - Identifier for the destination datatype. -! nelmts - Size of array buf. -! buf - Array containing pre-conversion values. -! background - Optional background buffer. -! plist_id - Dataset transfer property list identifier. -! -! Outputs: -! buf - Array containing post-conversion values. -! hdferr - error code: -! 0 on success and -1 on failure -! AUTHOR -! M. Scot Breitenfeld -! Decemember 8, 2008 -! -! Fortran2003 Interface: - SUBROUTINE h5tconvert_f(src_id, dst_id, nelmts, buf, hdferr, background, plist_id) - USE, INTRINSIC :: ISO_C_BINDING - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: src_id - INTEGER(HID_T) , INTENT(IN) :: dst_id - INTEGER(SIZE_T), INTENT(IN) :: nelmts - TYPE(C_PTR) , INTENT(INOUT) :: buf - INTEGER , INTENT(OUT) :: hdferr - TYPE(C_PTR) , INTENT(INOUT), OPTIONAL :: background - INTEGER(HID_T) , INTENT(IN) , OPTIONAL :: plist_id -!***** - INTEGER(HID_T) :: plist_id_default - TYPE(C_PTR) :: background_default - - INTERFACE - INTEGER FUNCTION h5tconvert_c(src_id, dst_id, nelmts, buf, background, plist_id) & - BIND(C, NAME='h5tconvert_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr - USE H5GLOBAL - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: src_id - INTEGER(HID_T) , INTENT(IN) :: dst_id - INTEGER(SIZE_T), INTENT(IN) :: nelmts - TYPE(C_PTR) , VALUE :: buf - TYPE(C_PTR) , VALUE :: background - INTEGER(HID_T) , INTENT(IN) :: plist_id - END FUNCTION h5tconvert_c - END INTERFACE - - plist_id_default = H5P_DEFAULT_F - IF(PRESENT(plist_id)) plist_id_default = plist_id - - background_default = C_NULL_PTR - IF(PRESENT(background)) background_default = background - - hdferr = H5Tconvert_c(src_id, dst_id, nelmts, buf, background_default, plist_id_default) - - END SUBROUTINE h5tconvert_f -! -!****s* (F03) H5T/h5tenum_insert_f90 -! -! NAME -! h5tenum_insert_f -! -! PURPOSE -! Inserts a new enumeration datatype member. -! -! INPUTS -! type_id - Datatype identifier for the enumeration datatype. -! name - Datatype identifier. -! value - Value of the new member. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tenum_insert_f90(type_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier - CHARACTER(LEN=*), INTENT(IN) :: name !Name of the new member - INTEGER, INTENT(IN) :: value ! value of the new member - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: namelen - INTERFACE - INTEGER FUNCTION h5tenum_insert_c(type_id, name, namelen, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENUM_INSERT_C'::h5tenum_insert_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: value - INTEGER :: namelen - END FUNCTION h5tenum_insert_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tenum_insert_c(type_id, name, namelen, value) - END SUBROUTINE h5tenum_insert_f90 - -! -!****s* (F03) H5T/h5tenum_insert_f03 -! -! NAME -! h5tenum_insert_f -! -! PURPOSE -! Inserts a new enumeration datatype member. -! -! INPUTS -! type_id - Datatype identifier for the enumeration datatype. -! name - Datatype identifier. -! value - Pointer to the value of the new member. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! M. Scot Breitenfeld -! February 6, 2015 -! -! HISTORY -! F2003 implementation of function -! SOURCE - SUBROUTINE h5tenum_insert_f03(type_id, name, value, hdferr) - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, c_char - USE H5GLOBAL - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - TYPE(C_PTR) , INTENT(IN) :: value - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5tenum_insert_ptr_c(type_id, name, namelen, value) & - BIND(C, NAME='h5tenum_insert_ptr_c') - USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, c_char - USE H5GLOBAL - IMPLICIT NONE - INTEGER(HID_T) , INTENT(IN) :: type_id - CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name - INTEGER :: namelen - TYPE(C_PTR), VALUE :: value - END FUNCTION h5tenum_insert_ptr_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tenum_insert_ptr_c(type_id, name, namelen, value) - END SUBROUTINE h5tenum_insert_f03 - -END MODULE H5T_PROVISIONAL - diff --git a/fortran/src/H5Tff_F90.f90 b/fortran/src/H5Tff_F90.f90 deleted file mode 100644 index 380fbec..0000000 --- a/fortran/src/H5Tff_F90.f90 +++ /dev/null @@ -1,95 +0,0 @@ -!****h* ROBODoc/H5T (F90) -! -! NAME -! MODULE H5T_PROVISIONAL -! -! PURPOSE -! This file contains Fortran 90 interfaces for H5T functions. It contains -! the same functions as H5Tff_F03.f90 but excludes the Fortran 2003 functions -! and the interface listings. This file will be compiled instead of H5Tff_F03.f90 -! if Fortran 2003 functions are not enabled. -! -! NOTE -! Currently contains no functions. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! *** IMPORTANT *** -! If you add a new H5D function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5T_PROVISIONAL - - USE H5GLOBAL - -CONTAINS - -! -!****s* H5T/h5tenum_insert_f -! -! NAME -! h5tenum_insert_f -! -! PURPOSE -! Inserts a new enumeration datatype member. -! -! INPUTS -! type_id - Datatype identifier for the enumeration datatype. -! name - Datatype identifier. -! value - Value of the new member. -! OUTPUTS -! hdferr - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). March 7, 2001 -! SOURCE - SUBROUTINE h5tenum_insert_f(type_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: value - INTEGER, INTENT(OUT) :: hdferr -!***** - INTEGER :: namelen - - INTERFACE - INTEGER FUNCTION h5tenum_insert_c(type_id, name, namelen, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TENUM_INSERT_C'::h5tenum_insert_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: type_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: value - INTEGER :: namelen - END FUNCTION h5tenum_insert_c - END INTERFACE - - namelen = LEN(name) - hdferr = h5tenum_insert_c(type_id, name, namelen, value) - END SUBROUTINE h5tenum_insert_f - -END MODULE H5T_PROVISIONAL diff --git a/fortran/src/H5Zf.c b/fortran/src/H5Zf.c index 169e018..a8cf1c2 100644 --- a/fortran/src/H5Zf.c +++ b/fortran/src/H5Zf.c @@ -1,6 +1,6 @@ /****h* H5Zf/H5Zf * PURPOSE - * This file contains C stubs for H5Z Fortran APIs + * This file contains C stubs for H5Z Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -25,22 +25,22 @@ /****if* H5Zf/h5zunregister_c * NAME - * h5zunregister_c + * h5zunregister_c * PURPOSE - * Call H5Zunregister to unregister filter + * Call H5Zunregister to unregister filter * INPUTS - * filter identifier + * filter identifier * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12, 2003 + * Wednesday, March 12, 2003 * HISTORY * * SOURCE */ int_f -nh5zunregister_c (int_f *filter) +h5zunregister_c (int_f *filter) /******/ { int ret_value = -1; @@ -58,25 +58,25 @@ nh5zunregister_c (int_f *filter) } /****if* H5Zf/h5zfiletr_avail_c * NAME - * h5zfiletr_avail_c + * h5zfiletr_avail_c * PURPOSE - * Call H5Zfilter_avail to find if filter is available + * Call H5Zfilter_avail to find if filter is available * INPUTS - * filter - filter identifier + * filter - filter identifier * OUTPUTS - * flag - status flag + * flag - status flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Elena Pourmal - * Wednesday, March 12, 2003 + * Wednesday, March 12, 2003 * HISTORY * * SOURCE */ int_f -nh5zfilter_avail_c ( int_f *filter , int_f *flag ) +h5zfilter_avail_c ( int_f *filter , int_f *flag ) /******/ { int ret_value = 0; @@ -92,26 +92,26 @@ nh5zfilter_avail_c ( int_f *filter , int_f *flag ) /****if* H5Zf/h5zget_filter_info_c * NAME - * h5zget_filter_info_c + * h5zget_filter_info_c * PURPOSE - * Call H5Zget_filter_info to find if filter has its encoder - * and/or its decoder available + * Call H5Zget_filter_info to find if filter has its encoder + * and/or its decoder available * INPUTS - * filter - filter identifier + * filter - filter identifier * OUTPUTS - * flag - status flag + * flag - status flag * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR * Nat Furrer and James Laird - * Wednesday, June 16, 2004 + * Wednesday, June 16, 2004 * HISTORY * * SOURCE */ int_f -nh5zget_filter_info_c ( int_f *filter , int_f *flag ) +h5zget_filter_info_c ( int_f *filter , int_f *flag ) /******/ { int ret_value = 0; diff --git a/fortran/src/H5Zff.F90 b/fortran/src/H5Zff.F90 new file mode 100644 index 0000000..0259959 --- /dev/null +++ b/fortran/src/H5Zff.F90 @@ -0,0 +1,189 @@ +!****h* ROBODoc/H5Z +! +! NAME +! MODULE H5Z +! +! PURPOSE +! This file contains Fortran interfaces for H5Z functions. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new H5Z function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +MODULE H5Z + + USE H5GLOBAL + +CONTAINS + +!****s* H5Z/h5zunregister_f +! +! NAME +! h5zunregister_f +! +! PURPOSE +! Unregisters specified filetr +! +! INPUTS +! filter - Filter; may have one of the following values: +! H5Z_FILTER_DEFLATE_F +! H5Z_FILTER_SZIP_F +! H5Z_FILTER_NBIT_F +! H5Z_FILTER_SCALEOFFSET_F +! H5Z_FILTER_SHUFFLE_F +! H5Z_FILTER_FLETCHER32_F +! +! OUTPUTS +! hdferr - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! SOURCE + SUBROUTINE h5zunregister_f(filter, hdferr) + IMPLICIT NONE + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(OUT) :: hdferr +!***** + INTERFACE + INTEGER FUNCTION h5zunregister_c(filter) BIND(C,NAME='h5zunregister_c') + INTEGER, INTENT(IN) :: filter + END FUNCTION h5zunregister_c + END INTERFACE + hdferr = h5zunregister_c(filter) + END SUBROUTINE h5zunregister_f + +!****s* H5Z/h5zfilter_avail_f +! NAME +! h5zfilter_avail_f +! +! PURPOSE +! Queries if filter is available +! +! INPUTS +! filter - Filter; may be one of the following: +! H5Z_FILTER_DEFLATE_F +! H5Z_FILTER_SZIP_F +! H5Z_FILTER_NBIT_F +! H5Z_FILTER_SCALEOFFSET_F +! H5Z_FILTER_SHUFFLE_F +! H5Z_FILTER_FLETCHER32_F +! OUTPUTS +! status - Flag; .TRUE. if filter is available, +! .FALSE. otherwise +! hdferr: - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Elena Pourmal +! March 12, 2003 +! +! SOURCE + SUBROUTINE h5zfilter_avail_f(filter, status, hdferr) + IMPLICIT NONE + INTEGER, INTENT(IN) :: filter + LOGICAL, INTENT(OUT) :: status + INTEGER, INTENT(OUT) :: hdferr +!***** + INTEGER :: flag ! "TRUE/FALSE/ERROR from C" + + INTERFACE + INTEGER FUNCTION h5zfilter_avail_c(filter, flag) BIND(C,NAME='h5zfilter_avail_c') + IMPLICIT NONE + INTEGER, INTENT(IN) :: filter + INTEGER :: flag + END FUNCTION h5zfilter_avail_c + END INTERFACE + + hdferr = h5zfilter_avail_c(filter, flag) + status = .TRUE. + IF (flag .EQ. 0) status = .FALSE. + + END SUBROUTINE h5zfilter_avail_f + +!****s* H5Z/h5zget_filter_info_f +! +! NAME +! h5zget_filter_info_f +! +! PURPOSE +! Queries if filter has its encoder and/or decoder +! available +! +! INPUTS +! filter - Filter; may be one of the following: +! H5Z_FILTER_DEFLATE_F +! H5Z_FILTER_SZIP_F +! H5Z_FILTER_NBIT_F +! H5Z_FILTER_SCALEOFFSET_F +! H5Z_FILTER_SHUFFLE_F +! H5Z_FILTER_FLETCHER32_Ffilter +! OUTPUTS +! config_flags - Flag, indicates if filter has its encoder +! and/or decoder available, possibly containing the +! following values: +! H5Z_FILTER_ENCODE_ENABLED_F +! H5Z_FILTER_DECODE_ENABLED_F +! hdferr: - Error code +! Success: 0 +! Failure: -1 +! +! AUTHOR +! Nat Furrer and James Laird +! June 16, 2004 +! SOURCE + SUBROUTINE h5zget_filter_info_f(filter, config_flags, hdferr) + IMPLICIT NONE + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(OUT) :: config_flags + INTEGER, INTENT(OUT) :: hdferr +!***** + + INTERFACE + INTEGER FUNCTION h5zget_filter_info_c(filter, config_flags) BIND(C,NAME='h5zget_filter_info_c') + IMPLICIT NONE + INTEGER, INTENT(IN) :: filter + INTEGER, INTENT(OUT) :: config_flags + END FUNCTION h5zget_filter_info_c + END INTERFACE + + hdferr = h5zget_filter_info_c(filter, config_flags) + + END SUBROUTINE h5zget_filter_info_f + +END MODULE H5Z + + + + + diff --git a/fortran/src/H5Zff.f90 b/fortran/src/H5Zff.f90 deleted file mode 100644 index 7b67b5b..0000000 --- a/fortran/src/H5Zff.f90 +++ /dev/null @@ -1,198 +0,0 @@ -!****h* ROBODoc/H5Z -! -! NAME -! MODULE H5Z -! -! PURPOSE -! This file contains Fortran interfaces for H5Z functions. It includes -! all the functions that are independent on whether the Fortran 2003 functions -! are enabled or disabled. -! -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new H5Z function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5Z - - USE H5GLOBAL - -CONTAINS - -!****s* H5Z/h5zunregister_f -! -! NAME -! h5zunregister_f -! -! PURPOSE -! Unregisters specified filetr -! -! INPUTS -! filter - filter; may have one of the following values: -! H5Z_FILTER_DEFLATE_F -! H5Z_FILTER_SZIP_F -! H5Z_FILTER_NBIT_F -! H5Z_FILTER_SCALEOFFSET_F -! H5Z_FILTER_SHUFFLE_F -! H5Z_FILTER_FLETCHER32_F -! -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! SOURCE - SUBROUTINE h5zunregister_f(filter, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTERFACE - INTEGER FUNCTION h5zunregister_c (filter) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ZUNREGISTER_C':: h5zunregister_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: filter - END FUNCTION h5zunregister_c - END INTERFACE - hdferr = h5zunregister_c (filter) - END SUBROUTINE h5zunregister_f - -!****s* H5Z/h5zfilter_avail_f -! NAME -! h5zfilter_avail_f -! -! PURPOSE -! Queries if filter is available -! -! INPUTS -! filter - filter -! OUTPUTS -! status - status; .TRUE. if filter is available, -! .FALSE. otherwise -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Elena Pourmal -! March 12, 2003 -! -! SOURCE - SUBROUTINE h5zfilter_avail_f(filter, status, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: filter ! Filter; may be one of the following: - ! H5Z_FILTER_DEFLATE_F - ! H5Z_FILTER_SZIP_F - ! H5Z_FILTER_NBIT_F - ! H5Z_FILTER_SCALEOFFSET_F - ! H5Z_FILTER_SHUFFLE_F - ! H5Z_FILTER_FLETCHER32_F - LOGICAL, INTENT(OUT) :: status ! Flag, idicates if filter - ! is availble not ( TRUE or - ! FALSE) - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: flag ! "TRUE/FALSE/ERROR from C" - - INTERFACE - INTEGER FUNCTION h5zfilter_avail_c(filter, flag) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ZFILTER_AVAIL_C'::h5zfilter_avail_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: filter - INTEGER :: flag - END FUNCTION h5zfilter_avail_c - END INTERFACE - - hdferr = h5zfilter_avail_c(filter, flag) - status = .TRUE. - IF (flag .EQ. 0) status = .FALSE. - - END SUBROUTINE h5zfilter_avail_f -!****s* H5Z/h5zget_filter_info_f -! -! NAME -! h5zget_filter_info_f -! -! PURPOSE -! Queries if filter has its encoder and/or decoder -! available -! -! INPUTS -! filter - filter -! OUTPUTS -! config_flags - Bit vector possibly containing the -! following values: -! H5Z_FILTER_ENCODE_ENABLED_F -! H5Z_FILTER_DECODE_ENABLED_F -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! AUTHOR -! Nat Furrer and James Laird -! June 16, 2004 -! SOURCE - SUBROUTINE h5zget_filter_info_f(filter, config_flags, hdferr) - IMPLICIT NONE - INTEGER, INTENT(IN) :: filter ! Filter; may be one of the following: - ! H5Z_FILTER_DEFLATE_F - ! H5Z_FILTER_SZIP_F - ! H5Z_FILTER_NBIT_F - ! H5Z_FILTER_SCALEOFFSET_F - ! H5Z_FILTER_SHUFFLE_F - ! H5Z_FILTER_FLETCHER32_F - INTEGER, INTENT(OUT) :: config_flags! Flag, indicates if filter - ! has its encoder and/or decoder - ! available - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - - INTERFACE - INTEGER FUNCTION h5zget_filter_info_c(filter, config_flags) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5ZGET_FILTER_INFO_C'::h5zget_filter_info_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: filter - INTEGER, INTENT(OUT) :: config_flags - END FUNCTION h5zget_filter_info_c - END INTERFACE - - hdferr = h5zget_filter_info_c(filter, config_flags) - - END SUBROUTINE h5zget_filter_info_f - -END MODULE H5Z - - - - - diff --git a/fortran/src/H5_DBLE_InterfaceExclude.f90 b/fortran/src/H5_DBLE_InterfaceExclude.f90 deleted file mode 100644 index 2a3e26f..0000000 --- a/fortran/src/H5_DBLE_InterfaceExclude.f90 +++ /dev/null @@ -1,39 +0,0 @@ -!****h* fortran/src/H5_DBLE_InterfaceExclude.f90 -! -! NAME -! H5_DBLE_INTERFACE -! -! FUNCTION -! This module is used for when the default REAL is of type DOUBLE PRECISION. -! We do not include the double precision interfaces if the defaut REAL is -! DOUBLE PRECISION since this would lead to a non-unique conflict with the -! generic interfaces declared as REAL and those declared as DOUBLE PRECISION. -! -! NOTES -! Empty module. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! M. Scot Breitenfeld -! -!***** - -MODULE H5_DBLE_INTERFACE - - -END MODULE H5_DBLE_INTERFACE diff --git a/fortran/src/H5_DBLE_InterfaceInclude.f90 b/fortran/src/H5_DBLE_InterfaceInclude.f90 deleted file mode 100644 index 11e0a85..0000000 --- a/fortran/src/H5_DBLE_InterfaceInclude.f90 +++ /dev/null @@ -1,1859 +0,0 @@ -!****h* fortran/src/H5_DBLE_InterfaceInclude.f90 -! -! NAME -! H5_DBLE_INTERFACE -! -! FUNCTION -! This module is used for when the default REAL is not of the type DOUBLE PRECISION. -! We only do not include the double precision interfaces if the defaut REAL is -! DOUBLE PRECISION since this would lead to a non-unique conflict with the -! generic interfaces declared as REAL. Otherwise it is okay to include the interfaces. -! -! NOTES -! This module contains all the DOUBLE PRECISION interfaces and corresponding subroutines -! from the HDF function catagory H5A, H5D and H5P. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! M. Scot Breitenfeld -! -!***** - -MODULE H5_DBLE_INTERFACE - - USE H5GLOBAL - - ! - ! ----- H5A ---- - ! - INTERFACE h5awrite_f - MODULE PROCEDURE h5awrite_double_scalar - MODULE PROCEDURE h5awrite_double_1 - MODULE PROCEDURE h5awrite_double_2 - MODULE PROCEDURE h5awrite_double_3 - MODULE PROCEDURE h5awrite_double_4 - MODULE PROCEDURE h5awrite_double_5 - MODULE PROCEDURE h5awrite_double_6 - MODULE PROCEDURE h5awrite_double_7 - END INTERFACE - - INTERFACE h5aread_f - MODULE PROCEDURE h5aread_double_scalar - MODULE PROCEDURE h5aread_double_1 - MODULE PROCEDURE h5aread_double_2 - MODULE PROCEDURE h5aread_double_3 - MODULE PROCEDURE h5aread_double_4 - MODULE PROCEDURE h5aread_double_5 - MODULE PROCEDURE h5aread_double_6 - MODULE PROCEDURE h5aread_double_7 - END INTERFACE - ! - ! ----- H5D ---- - ! - INTERFACE h5dwrite_f - MODULE PROCEDURE h5dwrite_double_scalar - MODULE PROCEDURE h5dwrite_double_1 - MODULE PROCEDURE h5dwrite_double_2 - MODULE PROCEDURE h5dwrite_double_3 - MODULE PROCEDURE h5dwrite_double_4 - MODULE PROCEDURE h5dwrite_double_5 - MODULE PROCEDURE h5dwrite_double_6 - MODULE PROCEDURE h5dwrite_double_7 - END INTERFACE - - INTERFACE h5dread_f - MODULE PROCEDURE h5dread_double_scalar - MODULE PROCEDURE h5dread_double_1 - MODULE PROCEDURE h5dread_double_2 - MODULE PROCEDURE h5dread_double_3 - MODULE PROCEDURE h5dread_double_4 - MODULE PROCEDURE h5dread_double_5 - MODULE PROCEDURE h5dread_double_6 - MODULE PROCEDURE h5dread_double_7 - END INTERFACE - - INTERFACE h5dfill_f - MODULE PROCEDURE h5dfill_double - END INTERFACE - - ! - ! ----- H5P ---- - ! - INTERFACE h5pset_fill_value_f - MODULE PROCEDURE h5pset_fill_value_double - END INTERFACE - - INTERFACE h5pget_fill_value_f - MODULE PROCEDURE h5pget_fill_value_double - END INTERFACE - - INTERFACE h5pset_f - MODULE PROCEDURE h5pset_double - END INTERFACE - - INTERFACE h5pget_f - MODULE PROCEDURE h5pget_double - END INTERFACE - - INTERFACE h5pregister_f - MODULE PROCEDURE h5pregister_double - END INTERFACE - - INTERFACE h5pinsert_f - MODULE PROCEDURE h5pinsert_double - END INTERFACE - -CONTAINS - - ! - ! ----- H5A ---- - ! - SUBROUTINE h5awrite_double_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_S_C'::h5awrite_double_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN)::buf - END FUNCTION h5awrite_double_s_c - END INTERFACE - - hdferr = h5awrite_double_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_scalar - - SUBROUTINE h5awrite_double_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1)) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_1_C'::h5awrite_double_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5awrite_double_1_c - END INTERFACE - - hdferr = h5awrite_double_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_1 - - - SUBROUTINE h5awrite_double_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_2_C'::h5awrite_double_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5awrite_double_2_c - END INTERFACE - - hdferr = h5awrite_double_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_2 - - - SUBROUTINE h5awrite_double_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_3_C'::h5awrite_double_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5awrite_double_3_c - END INTERFACE - - hdferr = h5awrite_double_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_3 - - - SUBROUTINE h5awrite_double_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_4_C'::h5awrite_double_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5awrite_double_4_c - END INTERFACE - - hdferr = h5awrite_double_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_4 - - - SUBROUTINE h5awrite_double_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_5_C'::h5awrite_double_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5awrite_double_5_c - END INTERFACE - - hdferr = h5awrite_double_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_5 - - - SUBROUTINE h5awrite_double_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_6_C'::h5awrite_double_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5awrite_double_6_c - END INTERFACE - - hdferr = h5awrite_double_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_6 - - - SUBROUTINE h5awrite_double_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5awrite_double_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5awrite_double_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AWRITE_DOUBLE_7_C'::h5awrite_double_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5awrite_double_7_c - END INTERFACE - - hdferr = h5awrite_double_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5awrite_double_7 - - - SUBROUTINE h5aread_double_scalar(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT) :: buf ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_s_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_S_C'::h5aread_double_s_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT)::buf - END FUNCTION h5aread_double_s_c - END INTERFACE - - hdferr = h5aread_double_s_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_scalar - - SUBROUTINE h5aread_double_1(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_1_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_1_C'::h5aread_double_1_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5aread_double_1_c - END INTERFACE - - hdferr = h5aread_double_1_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_1 - - - SUBROUTINE h5aread_double_2(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_2_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_2_C'::h5aread_double_2_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5aread_double_2_c - END INTERFACE - - hdferr = h5aread_double_2_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_2 - - - SUBROUTINE h5aread_double_3(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_3_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_3_C'::h5aread_double_3_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5aread_double_3_c - END INTERFACE - - hdferr = h5aread_double_3_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_3 - - - SUBROUTINE h5aread_double_4(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_4_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_4_C'::h5aread_double_4_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5aread_double_4_c - END INTERFACE - - hdferr = h5aread_double_4_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_4 - - - SUBROUTINE h5aread_double_5(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_5_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_5_C'::h5aread_double_5_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5aread_double_5_c - END INTERFACE - - hdferr = h5aread_double_5_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_5 - - - SUBROUTINE h5aread_double_6(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_6_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_6_C'::h5aread_double_6_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5aread_double_6_c - END INTERFACE - - hdferr = h5aread_double_6_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_6 - - - SUBROUTINE h5aread_double_7(attr_id, memtype_id, buf, dims, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: attr_id ! Attribute identifier - INTEGER(HID_T), INTENT(IN) :: memtype_id ! Attribute datatype - ! identifier (in memory) - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - ! Attribute data - INTEGER, INTENT(OUT) :: hdferr ! Error code - - ! INTEGER, EXTERNAL :: h5aread_double_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5aread_double_7_c(attr_id, memtype_id, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5AREAD_DOUBLE_7_C'::h5aread_double_7_c - !DEC$ENDIF - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims ! Array to story buf dimension sizes - INTEGER(HID_T), INTENT(IN) :: attr_id - INTEGER(HID_T), INTENT(IN) :: memtype_id - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5aread_double_7_c - END INTERFACE - - hdferr = h5aread_double_7_c(attr_id, memtype_id, buf, dims) - END SUBROUTINE h5aread_double_7 - - - ! - ! ----- H5D ---- - ! - SUBROUTINE h5dwrite_double_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_S_C'::h5dwrite_double_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN) :: buf - END FUNCTION h5dwrite_double_s_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_scalar - - SUBROUTINE h5dwrite_double_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_1_C'::h5dwrite_double_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dwrite_double_1_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_1 - - SUBROUTINE h5dwrite_double_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_2_C'::h5dwrite_double_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dwrite_double_2_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_2 - - SUBROUTINE h5dwrite_double_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_3_C'::h5dwrite_double_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dwrite_double_3_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_3 - - SUBROUTINE h5dwrite_double_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_4_C'::h5dwrite_double_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dwrite_double_4_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_4 - - SUBROUTINE h5dwrite_double_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_5_C'::h5dwrite_double_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dwrite_double_5_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_5 - - SUBROUTINE h5dwrite_double_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_6_C'::h5dwrite_double_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dwrite_double_6_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_6 - - SUBROUTINE h5dwrite_double_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dwrite_double_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dwrite_double_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DWRITE_DOUBLE_7_C'::h5dwrite_double_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(IN), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dwrite_double_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dwrite_double_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dwrite_double_7 - - SUBROUTINE h5dread_double_scalar(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT) :: buf ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_s_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_s_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_S_C'::h5dread_double_s_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(OUT) :: buf - END FUNCTION h5dread_double_s_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_s_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_scalar - - SUBROUTINE h5dread_double_1(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_1_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_1_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_1_C'::h5dread_double_1_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1)) :: buf - END FUNCTION h5dread_double_1_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_1_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_1 - - SUBROUTINE h5dread_double_2(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_2_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_2_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_2_C'::h5dread_double_2_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2)) :: buf - END FUNCTION h5dread_double_2_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_2_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_2 - - SUBROUTINE h5dread_double_3(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_3_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_3_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_3_C'::h5dread_double_3_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf - END FUNCTION h5dread_double_3_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_3_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_3 - - SUBROUTINE h5dread_double_4(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_4_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_4_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_4_C'::h5dread_double_4_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf - END FUNCTION h5dread_double_4_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_4_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_4 - - SUBROUTINE h5dread_double_5(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_5_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_5_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_5_C'::h5dread_double_5_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf - END FUNCTION h5dread_double_5_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_5_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_5 - - SUBROUTINE h5dread_double_6(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_6_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_6_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_6_C'::h5dread_double_6_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf - END FUNCTION h5dread_double_6_c - END INTERFACE - - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_6_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_6 - - SUBROUTINE h5dread_double_7(dset_id, mem_type_id, buf, dims, hdferr, & - mem_space_id, file_space_id, xfer_prp) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: dset_id ! Dataset identifier - INTEGER(HID_T), INTENT(IN) :: mem_type_id ! Memory datatype identifier - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - ! Data buffer - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id - ! Memory dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id - ! File dataspace identfier - INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp - ! Transfer property list identifier - - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - - ! INTEGER, EXTERNAL :: h5dread_double_7_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dread_double_7_c(dset_id, mem_type_id, & - mem_space_id_default, & - file_space_id_default, & - xfer_prp_default, buf, dims) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DREAD_DOUBLE_7_C'::h5dread_double_7_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: dset_id - INTEGER(HID_T), INTENT(IN) :: mem_type_id - INTEGER(HID_T) :: mem_space_id_default - INTEGER(HID_T) :: file_space_id_default - INTEGER(HID_T) :: xfer_prp_default - INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims - DOUBLE PRECISION, INTENT(INOUT), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf - END FUNCTION h5dread_double_7_c - END INTERFACE - - xfer_prp_default = H5P_DEFAULT_F - mem_space_id_default = H5S_ALL_F - file_space_id_default = H5S_ALL_F - - if (present(xfer_prp)) xfer_prp_default = xfer_prp - if (present(mem_space_id)) mem_space_id_default = mem_space_id - if (present(file_space_id)) file_space_id_default = file_space_id - - hdferr = h5dread_double_7_c(dset_id, mem_type_id, mem_space_id_default, & - file_space_id_default, xfer_prp_default, buf, dims) - - END SUBROUTINE h5dread_double_7 - - !---------------------------------------------------------------------- - ! Name: h5dfill_double - ! - ! Purpose: Fills dataspace elements with a fill value in a memory buffer. - ! Only INTEGER, CHARACTER, REAL and DOUBLE PRECISION datatypes - ! of the fillvalues and buffers are supported. Buffer and fillvalue - ! are assumed to have the same datatype. - ! Only one-dimesional buffers are supported. - ! - ! Inputs: - ! fill_value - fill value - ! space_id - memory space selection identifier - ! buf - data buffer iin memory ro apply selection to - ! - of k-th dimension of the buf array - ! Outputs: - ! hdferr: - error code - ! Success: 0 - ! Failure: -1 - ! - ! Programmer: Elena Pourmal - ! March 12, 2003 - ! - !---------------------------------------------------------------------- - - SUBROUTINE h5dfill_double(fill_value, space_id, buf, hdferr) - IMPLICIT NONE - DOUBLE PRECISION, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - DOUBLE PRECISION, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - - ! INTEGER, EXTERNAL :: h5dfill_double_c - ! MS FORTRAN needs explicit interface for C functions called here. - ! - INTERFACE - INTEGER FUNCTION h5dfill_double_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DFILL_DOUBLE_C'::h5dfill_double_c - !DEC$ENDIF - DOUBLE PRECISION, INTENT(IN) :: fill_value ! Fill value - INTEGER(HID_T) :: fill_type_id ! Fill value datatype identifier - INTEGER(HID_T), INTENT(IN) :: space_id ! Memory dataspace selection identifier - DOUBLE PRECISION, INTENT(IN), DIMENSION(*) :: buf ! Memory buffer to fill in - INTEGER(HID_T) :: mem_type_id ! Buffer dadtype identifier - END FUNCTION h5dfill_double_c - END INTERFACE - fill_type_id = H5T_NATIVE_DOUBLE - mem_type_id = H5T_NATIVE_DOUBLE - - hdferr = h5dfill_double_c(fill_value, fill_type_id, space_id, & - buf, mem_type_id) - - - END SUBROUTINE h5dfill_double - - ! - ! -- H5P --- - ! - - SUBROUTINE h5pset_fill_value_double(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - DOUBLE PRECISION, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pset_fill_value_double_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_FILL_VALUE_DOUBLE_C'::h5pset_fill_value_double_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - DOUBLE PRECISION, INTENT(IN) :: fillvalue - END FUNCTION h5pset_fill_value_double_c - END INTERFACE - - hdferr = h5pset_fill_value_double_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pset_fill_value_double - - SUBROUTINE h5pget_fill_value_double(prp_id, type_id, fillvalue, & - hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! Datatype identifier of - ! of fillvalue datatype - ! (in memory) - DOUBLE PRECISION, INTENT(IN) :: fillvalue ! Fillvalue - INTEGER, INTENT(OUT) :: hdferr ! Error code - - INTERFACE - INTEGER FUNCTION h5pget_fill_value_double_c(prp_id, type_id, fillvalue) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_FILL_VALUE_DOUBLE_C'::h5pget_fill_value_double_c - !DEC$ENDIF - INTEGER(HID_T), INTENT(IN) :: prp_id - INTEGER(HID_T), INTENT(IN) :: type_id - DOUBLE PRECISION :: fillvalue - END FUNCTION h5pget_fill_value_double_c - END INTERFACE - - hdferr = h5pget_fill_value_double_c(prp_id, type_id, fillvalue) - END SUBROUTINE h5pget_fill_value_double - -! -!****s* H5P (F90)/h5pset_double -! -! NAME -! h5pset_double -! -! PURPOSE -! Sets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! value - value to set property to -! OUTPUTS -! hdferr: - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! SOURCE - SUBROUTINE h5pset_double(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - DOUBLE PRECISION, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pset_double_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PSET_DOUBLE_C'::h5pset_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - DOUBLE PRECISION, INTENT(IN) :: value - END FUNCTION h5pset_double_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pset_double_c(prp_id, name , name_len, value) - END SUBROUTINE h5pset_double - -!****s* H5P (F90)/h5pget_double -! -! NAME -! h5pget_double -! -! PURPOSE -! Gets a property list value -! -! INPUTS -! prp_id - iproperty list identifier to modify -! name - name of property to modify -! OUTPUTS -! value - value of property -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 9, 2002 -! -! SOURCE - SUBROUTINE h5pget_double(prp_id, name, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: prp_id ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to modify - DOUBLE PRECISION, INTENT(OUT) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pget_double_c(prp_id, name, name_len, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PGET_DOUBLE_C'::h5pget_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: prp_id - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - DOUBLE PRECISION, INTENT(OUT) :: value - END FUNCTION h5pget_double_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pget_double_c(prp_id, name , name_len, value) - END SUBROUTINE h5pget_double - -! -!****s* H5P (F90)/h5pregister_double -! -! NAME -! h5pregister_double -! -! PURPOSE -! Registers a permanent property with a property list class. -! -! INPUTS -! class - property list class to register -! permanent property within -! name - name of property to register -! size - size of property in bytes -! value - default value for property in newly -! created property lists -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! -! SOURCE - SUBROUTINE h5pregister_double(class, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: class ! Property list class identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to register - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - DOUBLE PRECISION, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pregister_double_c(class, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PREGISTER_DOUBLE_C'::h5pregister_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: class - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - DOUBLE PRECISION, INTENT(IN) :: value - END FUNCTION h5pregister_double_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pregister_double_c(class, name , name_len, size, value) - END SUBROUTINE h5pregister_double - -!****s* H5P (F90)/h5pinsert_double -! -! NAME -! -! h5pinsert_double -! -! PURPOSE -! Registers a temporary property with a property list class. -! -! INPUTS -! plist - property list identifier -! permanent property within -! name - name of property to insert -! size - size of property in bytes -! value - initial value for the property -! OUTPUTS -! hdferr - error code -! Success: 0 -! Failure: -1 -! AUTHOR -! Elena Pourmal -! October 10, 2002 -! SOURCE - SUBROUTINE h5pinsert_double(plist, name, size, value, hdferr) - IMPLICIT NONE - INTEGER(HID_T), INTENT(IN) :: plist ! Property list identifier - CHARACTER(LEN=*), INTENT(IN) :: name ! Name of property to insert - INTEGER(SIZE_T), INTENT(IN) :: size ! Size of the property value - DOUBLE PRECISION, INTENT(IN) :: value ! Property value - INTEGER, INTENT(OUT) :: hdferr ! Error code -!***** - INTEGER :: name_len - - INTERFACE - INTEGER FUNCTION h5pinsert_double_c(plist, name, name_len, size, value) - USE H5GLOBAL - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5PINSERT_DOUBLE_C'::h5pinsert_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(HID_T), INTENT(IN) :: plist - CHARACTER(LEN=*), INTENT(IN) :: name - INTEGER, INTENT(IN) :: name_len - INTEGER(SIZE_T), INTENT(IN) :: size - DOUBLE PRECISION, INTENT(IN) :: value - END FUNCTION h5pinsert_double_c - END INTERFACE - - name_len = LEN(name) - hdferr = h5pinsert_double_c(plist, name , name_len, size, value) - END SUBROUTINE h5pinsert_double - -END MODULE H5_DBLE_INTERFACE diff --git a/fortran/src/H5_buildiface.F90 b/fortran/src/H5_buildiface.F90 new file mode 100644 index 0000000..9a42cbf --- /dev/null +++ b/fortran/src/H5_buildiface.F90 @@ -0,0 +1,1024 @@ +!****p* Program/H5_buildiface +! +! NAME +! Executable: H5_buildiface +! +! FILE +! fortran/src/H5_buildiface.f90 +! +! PURPOSE +! This stand alone program is used at build time to generate the module +! H5_gen (H5_gen.F90). It cycles through all the available KIND parameters for +! integers and reals. The appropriate program and subroutines are then generated +! depending on which of the KIND values are found. +! +! NOTES +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of +! STORAGE_SIZE/SIZEOF in H5_gen.F90. STORAGE_SIZE is standard +! compliant and should always be chosen over SIZEOF. +! +! The availability of STORAGE_SIZE/SIZEOF is checked at configure time and the TRUE/FALSE +! condition is set in the configure variable "FORTRAN_HAVE_STORAGE_SIZE" or +! "FORTRAN_HAVE_SIZEOF". +! +! The use of C_SIZOF(X) is not used since the argument X must be an interoperable +! data entity. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! AUTHOR +! M. Scot Breitenfeld +! +!***** + +#include + +PROGRAM H5_buildiface + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + +! These values are valid REAL KINDs (with corresponding C float) found during configure + H5_H5CONFIG_F_NUM_RKIND + H5_H5CONFIG_F_RKIND +! These values are valid INTEGER KINDs (with corresponding C integer) found during configure + H5_H5CONFIG_F_NUM_IKIND + H5_H5CONFIG_F_IKIND + + INTEGER :: i, j, k + INTEGER :: ji, jr, jd +#ifdef H5_FORTRAN_HAVE_C_LONG_DOUBLE + REAL(KIND=C_LONG_DOUBLE) :: c_longdble +#endif + REAL(KIND=C_DOUBLE) :: c_dble + REAL(KIND=C_FLOAT) :: c_flt + INTEGER :: sizeof_var + CHARACTER(LEN=2) :: chr2 +! subroutine rank of array being passed in + CHARACTER(LEN=2), DIMENSION(1:8), PARAMETER :: chr_rank=(/"_0","_1","_2","_3","_4","_5","_6","_7"/) +! rank definitions + CHARACTER(LEN=70), DIMENSION(1:8), PARAMETER :: rank_dim_line=(/ & + ' ', & + ', DIMENSION(dims(1)) ', & + ', DIMENSION(dims(1),dims(2)) ', & + ', DIMENSION(dims(1),dims(2),dims(3)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7))' & + /) +! pointer to the buffer + CHARACTER(LEN=37), DIMENSION(1:8), PARAMETER :: f_ptr_line=(/ & + ' f_ptr = C_LOC(buf) ', & + ' f_ptr = C_LOC(buf(1)) ', & + ' f_ptr = C_LOC(buf(1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1,1))' & + /) + CHARACTER(LEN=42), DIMENSION(1:8), PARAMETER :: fchr_ptr_line=(/ & + ' f_ptr = C_LOC(buf(1:1)) ', & + ' f_ptr = C_LOC(buf(1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1,1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1)(1:1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1,1)(1:1))' & + /) + +! (a) Generate Fortran H5* interfaces having multiple KIND interfaces. +! +! DEVELOPER'S NOTES: +! +! Only interfaces with arrays of rank 7 and less are provided. Even-though, the F2008 +! standard extended the maximum rank to 15, it was decided that user's should use the +! new APIs to handle those use cases. Handling rank 7 and less is for backward compatibility +! with the Fortran 90/95 APIs codes which could never handle ranks greater than 7. + + OPEN(11,FILE='H5_gen.F90') + WRITE(11,'(40(A,/))') & +'!****h* ROBODoc/H5_gen.F90',& +'!',& +'! NAME',& +'! H5_gen',& +'! ',& +'! PURPOSE',& +'! This module is generated at build by H5_buildiface.F90 to handle all the',& +'! detected KINDs for APIs being passed INTEGERs, REALs and CHARACTERs. Currently ',& +'! these are H5A, H5D and H5P APIs',& +'!',& +'! COPYRIGHT',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'! Copyright by The HDF Group. *',& +'! All rights reserved. *',& +'! *',& +'! This file is part of HDF5. The full HDF5 copyright notice, including *',& +'! terms governing use, modification, and redistribution, is contained in *',& +'! the files COPYING and Copyright.html. COPYING can be found at the root *',& +'! of the source code distribution tree; Copyright.html can be found at the *',& +'! root level of an installed copy of the electronic HDF5 document set and *',& +'! is linked from the top-level documents page. It can also be found at *',& +'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& +'! access to either file, you may request a copy from help@hdfgroup.org. *',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'!',& +'! AUTHOR',& +'! H5_buildiface.F90',& +'!',& +'!*****' + + WRITE(11,'(A)') "MODULE H5_GEN" + + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' USE H5GLOBAL' + + WRITE(11,'(A)') ' USE H5A' + WRITE(11,'(A)') ' USE H5D' + WRITE(11,'(A)') ' USE H5P' + WRITE(11,'(A)') ' IMPLICIT NONE' +!*************** +! H5A INTERFACES +!*************** +! +! H5Awrite_f +! + WRITE(11,'(A)') " INTERFACE h5awrite_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5awrite_rkind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5awrite_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO k = 2, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5awrite_ckind_rank"//chr_rank(k) + ENDDO + WRITE(11,'(A)') " END INTERFACE" + +! H5Aread_f + WRITE(11,'(A)') " INTERFACE h5aread_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5aread_rkind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5aread_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO k = 2, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5aread_ckind_rank"//chr_rank(k) + ENDDO + WRITE(11,'(A)') " END INTERFACE" +!*************** +! H5D INTERFACES +!*************** +! +! H5Dwrite_f + WRITE(11,'(A)') " INTERFACE h5dwrite_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dwrite_rkind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dwrite_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO k = 2, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dwrite_ckind_rank"//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Dread_f + WRITE(11,'(A)') " INTERFACE h5dread_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dread_rkind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dread_ikind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + DO k = 2, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5dread_ckind_rank"//chr_rank(k) + ENDDO + WRITE(11,'(A)') " END INTERFACE" + +!*************** +! H5P INTERFACES +!*************** +! +! H5Pset_fill_value_f + WRITE(11,'(A)') " INTERFACE h5pset_fill_value_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pset_fill_value_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Pget_fill_value_f + WRITE(11,'(A)') " INTERFACE h5pget_fill_value_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pget_fill_value_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Pset_f + WRITE(11,'(A)') " INTERFACE h5pset_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pset_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Pget_f + WRITE(11,'(A)') " INTERFACE h5pget_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pget_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Pregister_f + WRITE(11,'(A)') " INTERFACE h5pregister_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pregister_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! H5Pinsert_f + WRITE(11,'(A)') " INTERFACE h5pinsert_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE h5pinsert_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + + WRITE(11,'(A)') 'CONTAINS' + +!********************** +! H5A APIs +!********************** +! +! H5Awrite_f + +!****s* H5A (F03)/H5Awrite_f_F90 +! +! NAME +! H5Awrite_f_F90 +! +! PURPOSE +! Writes an attribute. +! +! Inputs: +! attr_id - Attribute identifier +! memtype_id - Attribute datatype identifier (in memory) +! dims - Array to hold corresponding dimension sizes of data buffer buf; +! dim(k) has value of the k-th dimension of buffer buf; +! values are ignored if buf is a scalar +! buf - Data buffer; may be a scalar or an array +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! dims parameter was added to make code portable; +! Aprile 4, 2001 +! +! Changed buf intent to INOUT to be consistant +! with how the C functions handles it. The pg +! compiler will return 0 if a buf value is not set. +! February, 2008 +! +! NOTES +! This function is overloaded to write INTEGER, +! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers +! up to 7 dimensions. +! +! Fortran90 Interface: +!! SUBROUTINE H5Awrite_f(attr_id, memtype_id, buf, dims, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: attr_id +!! INTEGER(HID_T) , INTENT(IN) :: memtype_id +!! TYPE , INTENT(IN) :: buf +!! INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims +!! INTEGER , INTENT(OUT) :: hdferr +!***** + + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5awrite_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5awrite_rkind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5awrite_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5awrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5awrite_ikind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5awrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + DO j = 2, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5awrite_ckind_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5awrite_ckind_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' CHARACTER(LEN=*) , INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') fchr_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Awrite_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5awrite_ckind_rank'//chr_rank(j) + ENDDO + +! +! H5Aread_f + +!****s* H5A (F03)/H5Aread_f_F90 +! +! NAME +! H5Aread_f_F90 +! +! PURPOSE +! Reads an attribute. +! +! Inputs: +! attr_id - Attribute identifier +! memtype_id - Attribute datatype identifier (in memory) +! dims - Array to hold corresponding dimension sizes of data buffer buf; +! dim(k) has value of the k-th dimension of buffer buf; +! values are ignored if buf is a scalar +! +! Outputs: +! buf - Data buffer; may be a scalar or an array +! hdferr - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces are added for +! called C functions (it is needed for Windows +! port). February 27, 2001 +! +! dims parameter was added to make code portable; +! Aprile 4, 2001 +! +! Changed buf intent to INOUT to be consistant +! with how the C functions handles it. The pg +! compiler will return 0 if a buf value is not set. +! February, 2008 +! +! NOTES +! This function is overloaded to write INTEGER, +! REAL, REAL(KIND=C_DOUBLE) and CHARACTER buffers +! up to 7 dimensions. +! Fortran90 Interface: +!! SUBROUTINE H5Aread_f(attr_id, memtype_id, buf, dims, hdferr) +!! INTEGER(HID_T) , INTENT(IN) :: attr_id +!! INTEGER(HID_T) , INTENT(IN) :: memtype_id +!! TYPE , INTENT(INOUT) :: buf +!! INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims +!! INTEGER , INTENT(OUT) :: hdferr +!***** + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5aread_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5aread_rkind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5aread_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5aread_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5aread_ikind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5aread_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + DO j = 2, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5aread_ckind_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5aread_ckind_rank'//chr_rank(j)//'(attr_id, memtype_id, buf, dims, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: attr_id' + WRITE(11,'(A)') ' INTEGER(HID_T) , INTENT(IN) :: memtype_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T) , INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER , INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') fchr_ptr_line(j) + WRITE(11,'(A)') ' hdferr = H5Aread_f_c(attr_id, memtype_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5aread_ckind_rank'//chr_rank(j) + ENDDO + +!********************** +! H5D APIs +!********************** +! +! h5dread_f + +! +! NAME +! h5dread_f +! +! PURPOSE +! Reads raw data from the specified dataset into buf, +! converting from file datatype and dataspace to memory +! datatype and dataspace. +! +! Inputs: +! dset_id - dataset identifier +! mem_type_id - memory type identifier +! dims - 1-dim array of size 7; dims(k) has the size +! - of k-th dimension of the buf array +! Outputs: +! buf - buffer to read data in +! hdferr: - error code +! Success: 0 +! Failure: -1 +! Optional parameters: +! mem_space_id - memory dataspace identifier +! file_space_id - file dataspace identifier +! xfer_prp - trasfer property list identifier +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! dims parameter was added to make code portable; +! n parameter was replaced with dims parameter in +! the h5dwrite_reference_obj and h5dwrite_reference_dsetreg +! functions. April 2, 2001 +! +! NOTES +! This function is overloaded to read INTEGER, +! REAL, DOUBLE PRECISION and CHARACTER buffers +! up to 7 dimensions, and one dimensional buffers +! of the TYPE(hobj_ref_t_f) and TYPE(hdset_reg_ref_t_f) +! types. +! + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dread_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dread_rkind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dread_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + + ENDDO + ENDDO + + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dread_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dread_ikind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dread_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + + ENDDO + ENDDO + DO j = 2, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dread_ckind_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dread_ckind_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(INOUT)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') fchr_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dread_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dread_ckind_rank'//chr_rank(j) + ENDDO +! +! h5dwrite_f + +!****s* H5D (F03)/h5dwrite_f_F03 +! +! NAME +! h5dwrite_f_F03 +! +! PURPOSE +! Writes raw data from a dataset into a buffer. +! +! Inputs: +! dset_id - Identifier of the dataset to write to. +! mem_type_id - Identifier of the memory datatype. +! buf - Buffer with data to be written to the file. +! +! Outputs: +! hdferr - Returns 0 if successful and -1 if fails +! +! Optional parameters: +! mem_space_id - Identifier of the memory dataspace. +! file_space_id - Identifier of the dataset's dataspace in the file. +! xfer_prp - Identifier of a transfer property list for this I/O operation. +! +! AUTHOR +! M. Scot Breitenfeld +! September 17, 2011 +! +! Fortran2003 Interface: +!! SUBROUTINE h5dwrite_f(dset_id, mem_type_id, buf, hdferr, & +!! mem_space_id, file_space_id, xfer_prp) +!! INTEGER(HID_T), INTENT(IN) :: dset_id +!! INTEGER(HID_T), INTENT(IN) :: mem_type_id +!! TYPE(C_PTR) , INTENT(IN) :: buf +!! INTEGER , INTENT(OUT) :: hdferr +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: mem_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: file_space_id +!! INTEGER(HID_T), INTENT(IN) , OPTIONAL :: xfer_prp +!***** + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dwrite_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dwrite_rkind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dwrite_rkind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dwrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dwrite_ikind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dwrite_ikind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + DO j = 2, 8 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5dwrite_ckind_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5dwrite_ckind_rank'//chr_rank(j)//'(dset_id, mem_type_id, buf, dims, hdferr, &' + WRITE(11,'(A)') ' mem_space_id, file_space_id, xfer_prp)' + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: dset_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: mem_type_id' + WRITE(11,'(A)') ' INTEGER(HSIZE_T), INTENT(IN), DIMENSION(*) :: dims' + WRITE(11,'(A)') ' CHARACTER(LEN=*),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: mem_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: file_space_id' + WRITE(11,'(A)') ' INTEGER(HID_T), OPTIONAL, INTENT(IN) :: xfer_prp' + WRITE(11,'(A)') ' INTEGER(HID_T) :: xfer_prp_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: mem_space_id_default' + WRITE(11,'(A)') ' INTEGER(HID_T) :: file_space_id_default' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' xfer_prp_default = H5P_DEFAULT_F' + WRITE(11,'(A)') ' mem_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' file_space_id_default = H5S_ALL_F' + WRITE(11,'(A)') ' IF(PRESENT(xfer_prp)) xfer_prp_default = xfer_prp' + WRITE(11,'(A)') ' IF(PRESENT(mem_space_id)) mem_space_id_default = mem_space_id' + WRITE(11,'(A)') ' IF(PRESENT(file_space_id)) file_space_id_default = file_space_id' + WRITE(11,'(A)') fchr_ptr_line(j) + WRITE(11,'(A)') ' hdferr = h5dwrite_f_c(dset_id, mem_type_id, mem_space_id_default, &' + WRITE(11,'(A)') ' file_space_id_default, xfer_prp_default, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5dwrite_ckind_rank'//chr_rank(j) + ENDDO + +!********************** +! H5P APIs +!********************** +! +! H5Pset_fill_value_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pset_fill_value_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5pset_fill_value_kind_'//TRIM(ADJUSTL(chr2))& + &//'(prp_id, type_id, fillvalue, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: prp_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: type_id' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: fillvalue' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr ' + WRITE(11,'(A)') ' f_ptr = C_LOC(fillvalue)' + WRITE(11,'(A)') ' hdferr = h5pset_fill_value_c(prp_id, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5pset_fill_value_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! H5Pget_fill_value_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pget_fill_value_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5pget_fill_value_kind_'//TRIM(ADJUSTL(chr2))& + &//'(prp_id, type_id, fillvalue, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: prp_id' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: type_id' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(OUT), TARGET :: fillvalue' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' f_ptr = C_LOC(fillvalue)' + WRITE(11,'(A)') ' hdferr = h5pget_fill_value_c(prp_id, type_id, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5pget_fill_value_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! H5Pset_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pset_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5pset_kind_'//TRIM(ADJUSTL(chr2))& + &//'(prp_id, name, value, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: prp_id' + WRITE(11,'(A)') ' CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: name' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: value' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER :: name_len' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' f_ptr = C_LOC(value)' + WRITE(11,'(A)') ' name_len = LEN(name)' + WRITE(11,'(A)') ' hdferr = h5pget_c(prp_id, name, name_len, f_ptr)' + + WRITE(11,'(A)') ' END SUBROUTINE h5pset_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! H5Pget_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pget_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5pget_kind_'//TRIM(ADJUSTL(chr2))& + &//'(prp_id, name, value, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: prp_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: name' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(OUT), TARGET :: value' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER :: name_len' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' f_ptr = C_LOC(value)' + WRITE(11,'(A)') ' name_len = LEN(name)' + WRITE(11,'(A)') ' hdferr = h5pget_c(prp_id, name, name_len, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5pget_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! H5Pregister_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pregister_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') 'SUBROUTINE h5pregister_kind_'//TRIM(ADJUSTL(chr2))& + &//'(class, name, size, value, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: class' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: name' + WRITE(11,'(A)') ' INTEGER(SIZE_T), INTENT(IN) :: size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: value' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER :: name_len' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' f_ptr = C_LOC(value)' + WRITE(11,'(A)') ' name_len = LEN(name)' + WRITE(11,'(A)') ' hdferr = h5pregister_c(class, name, name_len, size, f_ptr)' + WRITE(11,'(A)') 'END SUBROUTINE h5pregister_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! H5Pinsert_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5pinsert_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5pinsert_kind_'//TRIM(ADJUSTL(chr2))& + &//'(plist, name, size, value, hdferr)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(HID_T), INTENT(IN) :: plist' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: name' + WRITE(11,'(A)') ' INTEGER(SIZE_T), INTENT(IN) :: size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(IN), TARGET :: value' + WRITE(11,'(A)') ' INTEGER, INTENT(OUT) :: hdferr' + WRITE(11,'(A)') ' INTEGER :: name_len' + WRITE(11,'(A)') ' TYPE(c_ptr) :: f_ptr' + WRITE(11,'(A)') ' f_ptr = c_loc(value)' + WRITE(11,'(A)') ' name_len = LEN(name)' + WRITE(11,'(A)') ' hdferr = h5pinsert_c(plist, name , name_len, size, f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5pinsert_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + + WRITE(11,'(A)') 'END MODULE H5_gen' + + CLOSE(11) + +END PROGRAM H5_buildiface + + + diff --git a/fortran/src/H5_f.c b/fortran/src/H5_f.c index 1641989..e527dce 100644 --- a/fortran/src/H5_f.c +++ b/fortran/src/H5_f.c @@ -1,6 +1,6 @@ /****ih* H5_f/H5_f * PURPOSE - * This file contains C stubs for H5 Fortran APIs + * This file contains C stubs for H5 Fortran APIs * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -22,7 +22,7 @@ */ #include "H5f90.h" - +#include "H5fort_type_defines.h" /****if* H5_f/h5init_types_c * NAME * h5init_types_c @@ -30,17 +30,17 @@ * Initialize predefined datatypes in Fortran * INPUTS * types - array with the predefined Native Fortran - * type, its element and length must be the - * same as the types array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the types array defined in the + * H5f90global.F90 * floatingtypes - array with the predefined Floating Fortran - * type, its element and length must be the - * same as the floatingtypes array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the floatingtypes array defined in the + * H5f90global.F90 * integertypes - array with the predefined Integer Fortran - * type, its element and length must be the - * same as the integertypes array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the integertypes array defined in the + * H5f90global.F90 * RETURNS * 0 on success, -1 on failure * AUTHOR @@ -49,14 +49,14 @@ * SOURCE */ int_f -nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertypes ) +h5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertypes ) /******/ { int ret_value = -1; hid_t c_type_id; size_t tmp_val; -/* Fortran INTEGER is may not be the same as C in; do all checking to find +/* Fortran INTEGER may not be the same as C; do all checking to find an appropriate size */ if (sizeof(int_f) == sizeof(int)) { @@ -92,6 +92,12 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype if ((types[2] = (hid_t_f)H5Tcopy(H5T_NATIVE_LDOUBLE)) < 0) return ret_value; }/*end else */ #endif +#ifdef H5_HAVE_FLOAT128 + else if(sizeof(double_f)==sizeof(__float128)) { + if ((types[2] = H5Tcopy (H5T_NATIVE_FLOAT)) < 0) return ret_value; + if ( H5Tset_precision (types[2], 128) < 0) return ret_value; + }/*end else */ +#endif /* if ((types[3] = H5Tcopy(H5T_NATIVE_UINT8)) < 0) return ret_value; @@ -126,7 +132,11 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype if ((types[6] = (hid_t_f)H5Tcopy(H5T_NATIVE_INT)) < 0) return ret_value; } /*end if */ else if (sizeof(int_1_f) == sizeof(long long)) { - if ((types[6] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; + if ((types[6] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; + } /*end if */ + else { + if ((types[6] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[6], 128) < 0) return ret_value; } /*end else */ /* * FIND H5T_NATIVE_INTEGER_2 @@ -143,6 +153,10 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype else if (sizeof(int_2_f) == sizeof(long long)) { if ((types[7] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; } /*end else */ + else { + if ((types[7] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[7], 128) < 0) return ret_value; + } /*end else */ /* * FIND H5T_NATIVE_INTEGER_4 */ @@ -158,6 +172,10 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype else if (sizeof(int_4_f) == sizeof(long long)) { if ((types[8] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; } /*end else */ + else { + if ((types[8] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[8], 128) < 0) return ret_value; + } /*end else */ /* * FIND H5T_NATIVE_INTEGER_8 */ @@ -173,47 +191,65 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype else if (sizeof(int_8_f) == sizeof(long long)) { if ((types[9] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; } /*end else */ + else { + if ((types[9] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[9], 128) < 0) return ret_value; + } /*end else */ + /* - * FIND H5T_NATIVE_REAL_4 + * FIND H5T_NATIVE_REAL_C_FLOAT */ - if (sizeof(real_4_f) == sizeof(float)) { + if (sizeof(real_C_FLOAT_f) == sizeof(float)) { if ((types[10] = (hid_t_f)H5Tcopy(H5T_NATIVE_FLOAT)) < 0) return ret_value; } /*end if */ - else if (sizeof(real_4_f) == sizeof(double)) { + else if (sizeof(real_C_FLOAT_f) == sizeof(double)) { if ((types[10] = (hid_t_f)H5Tcopy(H5T_NATIVE_DOUBLE)) < 0) return ret_value; } /*end if */ #if H5_SIZEOF_LONG_DOUBLE!=0 - else if (sizeof(real_4_f) == sizeof(long double)) { + else if (sizeof(real_C_FLOAT_f) == sizeof(long double)) { if ((types[10] = (hid_t_f)H5Tcopy(H5T_NATIVE_LDOUBLE)) < 0) return ret_value; } /*end else */ #endif /* - * FIND H5T_NATIVE_REAL_8 + * FIND H5T_NATIVE_REAL_C_DOUBLE */ - if (sizeof(real_8_f) == sizeof(float)) { + if (sizeof(real_C_DOUBLE_f) == sizeof(float)) { if ((types[11] = (hid_t_f)H5Tcopy(H5T_NATIVE_FLOAT)) < 0) return ret_value; } /*end if */ - else if (sizeof(real_8_f) == sizeof(double)) { + else if (sizeof(real_C_DOUBLE_f) == sizeof(double)) { if ((types[11] = (hid_t_f)H5Tcopy(H5T_NATIVE_DOUBLE)) < 0) return ret_value; } /*end if */ #if H5_SIZEOF_LONG_DOUBLE!=0 - else if (sizeof(real_8_f) == sizeof(long double)) { + else if (sizeof(real_C_DOUBLE_f) == sizeof(long double)) { if ((types[11] = (hid_t_f)H5Tcopy(H5T_NATIVE_LDOUBLE)) < 0) return ret_value; } /*end else */ #endif /* - * FIND H5T_NATIVE_REAL_16 + * FIND H5T_NATIVE_REAL_C_LONG_DOUBLE */ - if (sizeof(real_16_f) == sizeof(float)) { +#if H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE!=0 + if (sizeof(real_C_LONG_DOUBLE_f) == sizeof(float)) { if ((types[12] = (hid_t_f)H5Tcopy(H5T_NATIVE_FLOAT)) < 0) return ret_value; } /*end if */ - else if (sizeof(real_16_f) == sizeof(double)) { + else if (sizeof(real_C_LONG_DOUBLE_f) == sizeof(double)) { if ((types[12] = (hid_t_f)H5Tcopy(H5T_NATIVE_DOUBLE)) < 0) return ret_value; } /*end if */ -#if H5_SIZEOF_LONG_DOUBLE!=0 - else if (sizeof(real_16_f) == sizeof(long double)) { +# if H5_FORTRAN_HAVE_C_LONG_DOUBLE!=0 + else if (sizeof(real_C_LONG_DOUBLE_f) == sizeof(long double)) { + if ( H5_PAC_C_MAX_REAL_PRECISION >= H5_PAC_FC_MAX_REAL_PRECISION) { if ((types[12] = (hid_t_f)H5Tcopy(H5T_NATIVE_LDOUBLE)) < 0) return ret_value; - } /*end else */ + } + else { + if ((types[12] = H5Tcopy (H5T_NATIVE_FLOAT)) < 0) return ret_value; + if ( H5Tset_precision (types[12], 128) < 0) return ret_value; + } + } +# else + if ((types[12] = H5Tcopy (H5T_NATIVE_FLOAT)) < 0) return ret_value; + if ( H5Tset_precision (types[12], 64) < 0) return ret_value; +# endif +#else + if ((types[12] = H5Tcopy(H5T_NATIVE_DOUBLE)) < 0) return ret_value; #endif /* * FIND H5T_NATIVE_B_8 @@ -221,7 +257,38 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype if ((types[13] = (hid_t_f)H5Tcopy(H5T_NATIVE_B8)) < 0) return ret_value; if ((types[14] = (hid_t_f)H5Tcopy(H5T_NATIVE_B16)) < 0) return ret_value; if ((types[15] = (hid_t_f)H5Tcopy(H5T_NATIVE_B32)) < 0) return ret_value; - if ((types[16] = (hid_t_f)H5Tcopy(H5T_NATIVE_B64)) < 0) return ret_value; + if ((types[16] = (hid_t_f)H5Tcopy(H5T_NATIVE_B64)) < 0) return ret_value; + +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + /* + * FIND H5T_NATIVE_INTEGER_16 + */ + if (sizeof(int_16_f) == sizeof(char)) { + if ((types[17] = (hid_t_f)H5Tcopy(H5T_NATIVE_CHAR)) < 0) return ret_value; + } /*end if */ + else if (sizeof(int_16_f) == sizeof(short)) { + if ((types[17] = (hid_t_f)H5Tcopy(H5T_NATIVE_SHORT)) < 0) return ret_value; + } /*end if */ + else if (sizeof(int_16_f) == sizeof(int)) { + if ((types[17] = (hid_t_f)H5Tcopy(H5T_NATIVE_INT)) < 0) return ret_value; + } /*end if */ + else if (sizeof(int_16_f) == sizeof(long long)) { + if ((types[17] = (hid_t_f)H5Tcopy(H5T_NATIVE_LLONG)) < 0) return ret_value; + } /*end else */ + else { + if ((types[17] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[17], 128) < 0) return ret_value; + } /*end else */ +#else + if ((types[17] = H5Tcopy (H5T_NATIVE_INT)) < 0) return ret_value; + if ( H5Tset_precision (types[17], 128) < 0) return ret_value; +#endif + + /* + * FIND H5T_NATIVE_FLOAT_128 + */ + if ((types[18] = H5Tcopy (H5T_NATIVE_FLOAT)) < 0) return ret_value; + if ( H5Tset_precision (types[18], 128) < 0) return ret_value; if ((floatingtypes[0] = (hid_t_f)H5Tcopy(H5T_IEEE_F32BE)) < 0) return ret_value; if ((floatingtypes[1] = (hid_t_f)H5Tcopy(H5T_IEEE_F32LE)) < 0) return ret_value; @@ -272,35 +339,35 @@ nh5init_types_c( hid_t_f * types, hid_t_f * floatingtypes, hid_t_f * integertype * Closes predefined datatype in Fortran * INPUTS * types - array with the predefined Native Fortran - * type, its element and length must be the - * same as the types array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the types array defined in the + * H5f90global.F90 * lentypes - length of the types array, which must be the - * same as the length of types array defined - * in the H5f90global.f90 + * same as the length of types array defined + * in the H5f90global.F90 * floatingtypes - array with the predefined Floating Fortran - * type, its element and length must be the - * same as the floatingtypes array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the floatingtypes array defined in the + * H5f90global.F90 * floatinglen - length of the floatingtypes array, which must be the - * same as the length of floatingtypes array defined - * in the H5f90global.f90 + * same as the length of floatingtypes array defined + * in the H5f90global.F90 * integertypes - array with the predefined Integer Fortran - * type, its element and length must be the - * same as the integertypes array defined in the - * H5f90global.f90 + * type, its element and length must be the + * same as the integertypes array defined in the + * H5f90global.F90 * integerlen - length of the floatingtypes array, which must be the - * same as the length of floatingtypes array defined - * in the H5f90global.f90 + * same as the length of floatingtypes array defined + * in the H5f90global.F90 * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal - * Tuesday, August 3, 1999 + * Elena Pourmal + * Tuesday, August 3, 1999 * SOURCE */ int_f -nh5close_types_c( hid_t_f * types, int_f *lentypes, +h5close_types_c( hid_t_f * types, int_f *lentypes, hid_t_f * floatingtypes, int_f* floatinglen, hid_t_f * integertypes, int_f * integerlen ) /******/ @@ -310,16 +377,16 @@ nh5close_types_c( hid_t_f * types, int_f *lentypes, int i; for (i = 0; i < *lentypes; i++) { - c_type_id = types[i]; - if ( H5Tclose(c_type_id) < 0) return ret_value; + c_type_id = types[i]; + if ( H5Tclose(c_type_id) < 0) return ret_value; } for (i = 0; i < *floatinglen; i++) { - c_type_id = floatingtypes[i]; - if ( H5Tclose(c_type_id) < 0) return ret_value; + c_type_id = floatingtypes[i]; + if ( H5Tclose(c_type_id) < 0) return ret_value; } for (i = 0; i < *integerlen; i++) { - c_type_id = integertypes[i]; - if ( H5Tclose(c_type_id) < 0) return ret_value; + c_type_id = integertypes[i]; + if ( H5Tclose(c_type_id) < 0) return ret_value; } ret_value = 0; return ret_value; @@ -368,7 +435,7 @@ nh5close_types_c( hid_t_f * types, int_f *lentypes, * SOURCE */ int_f -nh5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, +h5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, int_f *h5e_flags, hid_t_f *h5e_hid_flags, int_f *h5f_flags, int_f *h5fd_flags, hid_t_f *h5fd_hid_flags, int_f *h5g_flags, int_f *h5i_flags, int_f *h5l_flags, int_f *h5o_flags, @@ -524,11 +591,11 @@ nh5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, h5o_flags[6] = (int_f)H5O_COPY_ALL; /* All object copying flags (for internal checking) */ /* Flags for shared message indexes. - * Pass these flags in using the mesg_type_flags parameter in + * Pass these flags in using the mesg_type_flags parameter in * H5P_set_shared_mesg_index. * (Developers: These flags correspond to object header message type IDs, - * but we need to assign each kind of message to a different bit so that - * one index can hold multiple types.) + * but we need to assign each kind of message to a different bit so that + * one index can hold multiple types.) */ h5o_flags[7] = (int_f)H5O_SHMESG_NONE_FLAG; /* No shared messages */ h5o_flags[8] = (int_f)H5O_SHMESG_SDSPACE_FLAG; /* Simple Dataspace Message. */ @@ -547,7 +614,7 @@ nh5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, h5o_flags[19] = (int_f)H5O_HDR_ALL_FLAGS; /* Maximum shared message values. Number of indexes is 8 to allow room to add - * new types of messages. + * new types of messages. */ h5o_flags[20] = (int_f)H5O_SHMESG_MAX_NINDEXES; h5o_flags[21] = (int_f)H5O_SHMESG_MAX_LIST_SIZE; @@ -689,7 +756,7 @@ nh5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, /* - * H5 Generic flags introduced in version 1.8 -MSB- + * H5 Generic flags introduced in version 1.8 */ /* H5_index_t enum struct */ @@ -713,7 +780,7 @@ nh5init_flags_c( int_f *h5d_flags, size_t_f *h5d_size_flags, } int_f -nh5init1_flags_c(int_f *h5lib_flags) +h5init1_flags_c(int_f *h5lib_flags) /******/ { int ret_value = -1; @@ -727,19 +794,19 @@ nh5init1_flags_c(int_f *h5lib_flags) /****if* H5_f/h5open_c * NAME - * h5open_c + * h5open_c * PURPOSE - * Calls H5open call to initialize C HDF5 library + * Calls H5open call to initialize C HDF5 library * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal - * Friday, November 17, 2000 + * Elena Pourmal + * Friday, November 17, 2000 * * SOURCE */ int_f -nh5open_c(void) +h5open_c(void) /******/ { int ret_value = -1; @@ -750,17 +817,17 @@ nh5open_c(void) } /****if* H5_f/h5close_c * NAME - * h5close_c + * h5close_c * PURPOSE - * Calls H5close call to close C HDF5 library + * Calls H5close call to close C HDF5 library * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal + * Elena Pourmal * SOURCE */ int_f -nh5close_c(void) +h5close_c(void) /******/ { int ret_value = -1; @@ -772,28 +839,28 @@ nh5close_c(void) /****if* H5_f/h5get_libversion_c * NAME - * h5get_libversion_c + * h5get_libversion_c * PURPOSE - * Calls H5get_libversion function + * Calls H5get_libversion function * to retrieve library version info. * INPUTS * - * None + * None * OUTPUTS * - * majnum - the major version of the library - * minnum - the minor version of the library - * relnum - the release version of the library + * majnum - the major version of the library + * minnum - the minor version of the library + * relnum - the release version of the library * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal - * Tuesday, September 24, 2002 + * Elena Pourmal + * Tuesday, September 24, 2002 * SOURCE * */ int_f -nh5get_libversion_c(int_f *majnum, int_f *minnum, int_f *relnum) +h5get_libversion_c(int_f *majnum, int_f *minnum, int_f *relnum) /******/ { @@ -811,27 +878,27 @@ nh5get_libversion_c(int_f *majnum, int_f *minnum, int_f *relnum) /****if* H5_f/h5check_version_c * NAME - * h5check_version_c + * h5check_version_c * PURPOSE - * Calls H5check_version function + * Calls H5check_version function * to verify library version info. * INPUTS * - * majnum - the major version of the library - * minnum - the minor version of the library - * relnum - the release version of the library + * majnum - the major version of the library + * minnum - the minor version of the library + * relnum - the release version of the library * OUTPUTS * - * None + * None * RETURNS - * 0 on success, aborts on failure + * 0 on success, aborts on failure * AUTHOR - * Elena Pourmal - * Tuesday, September 24, 2002 + * Elena Pourmal + * Tuesday, September 24, 2002 * SOURCE */ int_f -nh5check_version_c(int_f *majnum, int_f *minnum, int_f *relnum) +h5check_version_c(int_f *majnum, int_f *minnum, int_f *relnum) /******/ { int ret_value = -1; @@ -849,18 +916,18 @@ nh5check_version_c(int_f *majnum, int_f *minnum, int_f *relnum) /****if* H5_f/h5garbage_collect_c * NAME - * h5garbage_collect_c + * h5garbage_collect_c * PURPOSE - * Calls H5garbage_collect to collect on all free-lists of all types + * Calls H5garbage_collect to collect on all free-lists of all types * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal - * Tuesday, September 24, 2002 + * Elena Pourmal + * Tuesday, September 24, 2002 * SOURCE */ int_f -nh5garbage_collect_c(void) +h5garbage_collect_c(void) /******/ { int ret_value = -1; @@ -872,18 +939,18 @@ nh5garbage_collect_c(void) /****if* H5_f/h5dont_atexit_c * NAME - * h5dont_atexit_c + * h5dont_atexit_c * PURPOSE - * Calls H5dont_atexit not to install atexit cleanup routine + * Calls H5dont_atexit not to install atexit cleanup routine * RETURNS - * 0 on success, -1 on failure + * 0 on success, -1 on failure * AUTHOR - * Elena Pourmal - * Tuesday, September 24, 2002 + * Elena Pourmal + * Tuesday, September 24, 2002 * SOURCE */ int_f -nh5dont_atexit_c(void) +h5dont_atexit_c(void) /******/ { int ret_value = -1; diff --git a/fortran/src/H5_ff.F90 b/fortran/src/H5_ff.F90 new file mode 100644 index 0000000..39e23a7 --- /dev/null +++ b/fortran/src/H5_ff.F90 @@ -0,0 +1,451 @@ +!****h* ROBODoc/H5LIB +! +! NAME +! MODULE H5LIB +! +! PURPOSE +! This module provides fortran specific helper functions for the HDF library +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! NOTES +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new function you must add the function name to the +! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. +! This is needed for Windows based operating systems. +! +!***** + +#include + +MODULE H5LIB + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : c_ptr, C_INTPTR_T + USE H5GLOBAL + IMPLICIT NONE + +CONTAINS +!****s* H5LIB/h5open_f +! +! NAME +! h5open_f +! +! PURPOSE +! Initializes HDF5 Fortran interface. +! +! Outputs: +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! Removed call to h5open_c since this may cause a problem for an +! application that uses HDF5 library outside HDF5 Fortran APIs. +! October 13, 2011 +! Fortran90 Interface: + SUBROUTINE h5open_f(error) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: error +!***** + INTEGER :: error_1, error_2, error_3 + + INTERFACE + INTEGER FUNCTION h5init_types_c(p_types, f_types, i_types) & + BIND(C,NAME='h5init_types_c') + IMPORT :: HID_T + IMPORT :: PREDEF_TYPES_LEN, FLOATING_TYPES_LEN, INTEGER_TYPES_LEN + IMPLICIT NONE + INTEGER(HID_T), DIMENSION(PREDEF_TYPES_LEN) :: p_types + INTEGER(HID_T), DIMENSION(FLOATING_TYPES_LEN) :: f_types + INTEGER(HID_T), DIMENSION(INTEGER_TYPES_LEN) :: i_types + END FUNCTION h5init_types_c + END INTERFACE + INTERFACE + INTEGER FUNCTION h5init_flags_c(i_H5D_flags, & + i_H5D_size_flags,& + i_H5E_flags, & + i_H5E_hid_flags, & + i_H5F_flags, & + i_H5FD_flags, & + i_H5FD_hid_flags, & + i_H5G_flags, & + i_H5I_flags, & + i_H5L_flags, & + i_H5O_flags, & + i_H5P_flags, & + i_H5P_flags_int, & + i_H5R_flags, & + i_H5S_flags, & + i_H5S_hsize_flags, & + i_H5T_flags, & + i_H5Z_flags, & + i_H5generic_flags) & + BIND(C,NAME='h5init_flags_c') + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPORT :: H5D_FLAGS_LEN, H5D_SIZE_FLAGS_LEN, & + H5E_FLAGS_LEN, H5E_HID_FLAGS_LEN, & + H5F_FLAGS_LEN, H5G_FLAGS_LEN, H5FD_FLAGS_LEN, & + H5FD_HID_FLAGS_LEN, H5I_FLAGS_LEN, H5L_FLAGS_LEN, & + H5O_FLAGS_LEN, H5P_FLAGS_LEN, H5P_FLAGS_INT_LEN, & + H5R_FLAGS_LEN, H5S_FLAGS_LEN, H5S_HSIZE_FLAGS_LEN, & + H5T_FLAGS_LEN, H5Z_FLAGS_LEN, H5generic_FLAGS_LEN + IMPLICIT NONE + INTEGER i_H5D_flags(H5D_FLAGS_LEN) + INTEGER(SIZE_T) i_H5D_size_flags(H5D_SIZE_FLAGS_LEN) + INTEGER i_H5E_flags(H5E_FLAGS_LEN) + INTEGER(HID_T) i_H5E_hid_flags(H5E_HID_FLAGS_LEN) + INTEGER i_H5F_flags(H5F_FLAGS_LEN) + INTEGER i_H5G_flags(H5G_FLAGS_LEN) + INTEGER i_H5FD_flags(H5FD_FLAGS_LEN) + INTEGER(HID_T) i_H5FD_hid_flags(H5FD_HID_FLAGS_LEN) + INTEGER i_H5I_flags(H5I_FLAGS_LEN) + INTEGER i_H5L_flags(H5L_FLAGS_LEN) + INTEGER i_H5O_flags(H5O_FLAGS_LEN) + INTEGER(HID_T) i_H5P_flags(H5P_FLAGS_LEN) + INTEGER i_H5P_flags_int(H5P_FLAGS_INT_LEN) + INTEGER i_H5R_flags(H5R_FLAGS_LEN) + INTEGER i_H5S_flags(H5S_FLAGS_LEN) + INTEGER(HSIZE_T) i_H5S_hsize_flags(H5S_HSIZE_FLAGS_LEN) + INTEGER i_H5T_flags(H5T_FLAGS_LEN) + INTEGER i_H5Z_flags(H5Z_FLAGS_LEN) + INTEGER i_H5generic_flags(H5generic_FLAGS_LEN) + END FUNCTION h5init_flags_c + END INTERFACE + INTERFACE + INTEGER FUNCTION h5init1_flags_c( i_H5LIB_flags ) & + BIND(C,NAME='h5init1_flags_c') + IMPORT :: H5LIB_FLAGS_LEN + IMPLICIT NONE + INTEGER i_H5LIB_flags(H5LIB_FLAGS_LEN) + END FUNCTION h5init1_flags_c + END INTERFACE + error_1 = h5init_types_c(predef_types, floating_types, integer_types) + error_2 = h5init_flags_c(H5D_flags, & + H5D_size_flags, & + H5E_flags, & + H5E_hid_flags, & + H5F_flags, & + H5FD_flags, & + H5FD_hid_flags, & + H5G_flags, & + H5I_flags, & + H5L_flags, & + H5O_flags, & + H5P_flags, & + H5P_flags_int, & + H5R_flags, & + H5S_flags, & + H5S_hsize_flags, & + H5T_flags, & + H5Z_flags, & + H5generic_flags) + error_3 = h5init1_flags_c(H5LIB_flags ) + error = error_1 + error_2 + error_3 + END SUBROUTINE h5open_f + +!****s* H5LIB/h5close_f +! +! NAME +! h5close_f +! +! PURPOSE +! Closes HDF5 Fortran interface. +! +! Outputs: +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! August 12, 1999 +! +! HISTORY +! Explicit Fortran interfaces were added for +! called C functions (it is needed for Windows +! port). February 28, 2001 +! +! Removed call to h5close_c since this may cause a problem for an +! application that uses HDF5 library outside HDF5 Fortran APIs. +! October 13, 2011 +! Fortran90 Interface: + SUBROUTINE h5close_f(error) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: error +!***** + INTEGER :: error_1 + INTERFACE + INTEGER FUNCTION h5close_types_c(p_types, P_TYPES_LEN, & + f_types, F_TYPES_LEN, & + i_types, I_TYPES_LEN ) & + BIND(C,NAME='h5close_types_c') + IMPORT :: HID_T + INTEGER P_TYPES_LEN + INTEGER F_TYPES_LEN + INTEGER I_TYPES_LEN + INTEGER(HID_T), DIMENSION(P_TYPES_LEN) :: p_types + INTEGER(HID_T), DIMENSION(F_TYPES_LEN) :: f_types + INTEGER(HID_T), DIMENSION(I_TYPES_LEN) :: i_types + END FUNCTION h5close_types_c + END INTERFACE + error_1 = h5close_types_c(predef_types, PREDEF_TYPES_LEN, & + floating_types, FLOATING_TYPES_LEN, & + integer_types, INTEGER_TYPES_LEN ) + error = error_1 + + END SUBROUTINE h5close_f + +!****s* H5LIB/h5get_libversion_f +! +! NAME +! h5get_libversion_f +! +! PURPOSE +! Returns the HDF5 LIbrary release number +! +! Outputs: +! majnum - major version of the library +! minum - minor version of the library +! relnum - release version of the library +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 24, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5get_libversion_f(majnum, minnum, relnum, error) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: majnum, minnum, relnum, error +!***** + INTERFACE + INTEGER FUNCTION h5get_libversion_c(majnum, minnum, relnum) & + BIND(C,NAME='h5get_libversion_c') + IMPLICIT NONE + INTEGER, INTENT(OUT) :: majnum, minnum, relnum + END FUNCTION h5get_libversion_c + END INTERFACE + + error = h5get_libversion_c(majnum, minnum, relnum) + + END SUBROUTINE h5get_libversion_f + +!****s* H5LIB/h5check_version_f +! +! NAME +! h5check_version_f +! +! PURPOSE +! Verifies that library versions are consistent. +! +! Inputs: +! majnum - major version of the library +! minum - minor version of the library +! relnum - release version of the library +! +! Outputs: +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 24, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5check_version_f(majnum, minnum, relnum, error) + IMPLICIT NONE + INTEGER, INTENT(IN) :: majnum, minnum, relnum + INTEGER, INTENT(OUT) :: error +!***** + INTERFACE + INTEGER FUNCTION h5check_version_c(majnum, minnum, relnum) & + BIND(C,NAME='h5check_version_c') + IMPLICIT NONE + INTEGER, INTENT(IN) :: majnum, minnum, relnum + END FUNCTION h5check_version_c + END INTERFACE + + error = h5check_version_c(majnum, minnum, relnum) + + END SUBROUTINE h5check_version_f +!****s* H5LIB/h5garbage_collect_f +! +! NAME +! h5garbage_collect_f +! +! PURPOSE +! Garbage collects on all free-lists of all types. +! +! Outputs: +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 24, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5garbage_collect_f(error) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: error +!***** + INTERFACE + INTEGER FUNCTION h5garbage_collect_c() & + BIND(C,NAME='h5garbage_collect_c') + END FUNCTION h5garbage_collect_c + END INTERFACE + + error = h5garbage_collect_c() + + END SUBROUTINE h5garbage_collect_f +!****s* H5LIB/h5dont_atexit_f +! +! NAME +! h5dont_atexit_f +! +! PURPOSE +! Instructs library not to install atexit cleanup routine. +! +! Outputs: +! error - Returns 0 if successful and -1 if fails +! +! AUTHOR +! Elena Pourmal +! September 24, 2002 +! +! Fortran90 Interface: + SUBROUTINE h5dont_atexit_f(error) + IMPLICIT NONE + INTEGER, INTENT(OUT) :: error +!***** + INTERFACE + INTEGER FUNCTION h5dont_atexit_c() & + BIND(C,NAME='h5dont_atexit_c') + END FUNCTION h5dont_atexit_c + END INTERFACE + + error = h5dont_atexit_c() + + END SUBROUTINE h5dont_atexit_f + +!****f* H5LIB/h5kind_to_type +! +! NAME +! h5kind_to_type +! +! PURPOSE +! Converts the KIND to the correct HDF type +! +! Inputs: +! kind - Fortran KIND parameter +! flag - Whether KIND is of type INTEGER or REAL: +! H5_INTEGER_KIND - integer +! H5_REAL_KIND - real +! Outputs: +! h5_type - Returns the type +! +! AUTHOR +! M. Scot Breitenfeld +! August 25, 2008 +! +! Fortran90 Interface: + INTEGER(HID_T) FUNCTION h5kind_to_type(kind, flag) RESULT(h5_type) + IMPLICIT NONE + INTEGER, INTENT(IN) :: kind + INTEGER, INTENT(IN) :: flag +!***** + IF(flag.EQ.H5_INTEGER_KIND)THEN + IF(kind.EQ.Fortran_INTEGER_1)THEN + h5_type = H5T_NATIVE_INTEGER_1 + ELSE IF(kind.EQ.Fortran_INTEGER_2)THEN + h5_type = H5T_NATIVE_INTEGER_2 + ELSE IF(kind.EQ.Fortran_INTEGER_4)THEN + h5_type = H5T_NATIVE_INTEGER_4 + ELSE IF(kind.EQ.Fortran_INTEGER_8)THEN + h5_type = H5T_NATIVE_INTEGER_8 +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + ELSE IF(kind.EQ.Fortran_INTEGER_16)THEN + h5_type = H5T_NATIVE_INTEGER_16 +#endif + ENDIF + ELSE IF(flag.EQ.H5_REAL_KIND)THEN + IF(kind.EQ.Fortran_REAL_C_FLOAT)THEN + h5_type = H5T_NATIVE_REAL_C_FLOAT + ELSE IF(kind.EQ.Fortran_REAL_C_DOUBLE)THEN + h5_type = H5T_NATIVE_REAL_C_DOUBLE +#if H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE!=0 + ELSE IF(kind.EQ.Fortran_REAL_C_LONG_DOUBLE)THEN + h5_type = H5T_NATIVE_REAL_C_LONG_DOUBLE +#endif +#if H5_PAC_FC_MAX_REAL_PRECISION > 28 +#if H5_HAVE_FLOAT128 == 1 + ELSE IF(kind.EQ.Fortran_REAL_C_FLOAT128)THEN + h5_type = H5T_NATIVE_FLOAT_128 +#endif +#endif + ELSE + h5_type = -1 + ENDIF + ENDIF + + END FUNCTION h5kind_to_type + +!****f* H5LIB_PROVISIONAL/h5offsetof +! +! NAME +! h5offsetof +! +! PURPOSE +! Computes the offset in memory +! +! Inputs: +! start - starting pointer address +! end - ending pointer address +! +! Outputs: +! offset - offset of a member within the derived type +! +! AUTHOR +! M. Scot Breitenfeld +! Augest 25, 2008 +! +! ACKNOWLEDGEMENTS +! Joe Krahn +! +! Fortran2003 Interface: + FUNCTION h5offsetof(start,end) RESULT(offset) + IMPLICIT NONE + INTEGER(SIZE_T) :: offset + TYPE(C_PTR), VALUE, INTENT(IN) :: start, end +!***** + INTEGER(C_INTPTR_T) :: int_address_start, int_address_end + int_address_start = TRANSFER(start, int_address_start) + int_address_end = TRANSFER(end , int_address_end ) + + offset = int_address_end - int_address_start + + END FUNCTION h5offsetof + +END MODULE H5LIB diff --git a/fortran/src/H5_ff.f90 b/fortran/src/H5_ff.f90 deleted file mode 100644 index 49e64a3..0000000 --- a/fortran/src/H5_ff.f90 +++ /dev/null @@ -1,409 +0,0 @@ -!****h* ROBODoc/H5LIB -! -! NAME -! MODULE H5LIB -! -! PURPOSE -! This module provides fortran specific helper functions for the HDF library -! -! USES -! H5LIB_PROVISIONAL - This module provides helper functions for Fortran 2003 -! only features. If Fortran 2003 functions are enabled then -! H5_ff_F03.f90 is compiled, else H5_ff_F90.f90, -! which is just a place holder blank module, is compiled. -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -! -!***** - -MODULE H5LIB - - USE H5LIB_PROVISIONAL ! helper functions for Fortran 2003 features: - ! pre-Fortran 2003 - empty module - ! Forttran 2003 - contains functions - USE H5GLOBAL - -CONTAINS -!****s* H5LIB/h5open_f -! -! NAME -! h5open_f -! -! PURPOSE -! Initializes HDF5 Fortran interface. -! -! Outputs: -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! Removed call to h5open_c since this may cause a problem for an -! application that uses HDF5 library outside HDF5 Fortran APIs. -! October 13, 2011 -! Fortran90 Interface: - SUBROUTINE h5open_f(error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(OUT) :: error -!***** - INTEGER :: error_1, error_2, error_3 - - INTERFACE - INTEGER FUNCTION h5init_types_c(p_types, f_types, i_types) - USE H5GLOBAL - INTEGER(HID_T), DIMENSION(PREDEF_TYPES_LEN) :: p_types - INTEGER(HID_T), DIMENSION(FLOATING_TYPES_LEN) :: f_types - INTEGER(HID_T), DIMENSION(INTEGER_TYPES_LEN) :: i_types - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5INIT_TYPES_C'::h5init_types_c - !DEC$ENDIF - END FUNCTION h5init_types_c - END INTERFACE - INTERFACE - INTEGER FUNCTION h5init_flags_c(i_H5D_flags, & - i_H5D_size_flags,& - i_H5E_flags, & - i_H5E_hid_flags, & - i_H5F_flags, & - i_H5FD_flags, & - i_H5FD_hid_flags, & - i_H5G_flags, & - i_H5I_flags, & - i_H5L_flags, & - i_H5O_flags, & - i_H5P_flags, & - i_H5P_flags_int, & - i_H5R_flags, & - i_H5S_flags, & - i_H5S_hsize_flags, & - i_H5T_flags, & - i_H5Z_flags, & - i_H5generic_flags) - USE H5GLOBAL - INTEGER i_H5D_flags(H5D_FLAGS_LEN) - INTEGER(SIZE_T) i_H5D_size_flags(H5D_SIZE_FLAGS_LEN) - INTEGER i_H5E_flags(H5E_FLAGS_LEN) - INTEGER(HID_T) i_H5E_hid_flags(H5E_HID_FLAGS_LEN) - INTEGER i_H5F_flags(H5F_FLAGS_LEN) - INTEGER i_H5G_flags(H5G_FLAGS_LEN) - INTEGER i_H5FD_flags(H5FD_FLAGS_LEN) - INTEGER(HID_T) i_H5FD_hid_flags(H5FD_HID_FLAGS_LEN) - INTEGER i_H5I_flags(H5I_FLAGS_LEN) - INTEGER i_H5L_flags(H5L_FLAGS_LEN) - INTEGER i_H5O_flags(H5O_FLAGS_LEN) - INTEGER(HID_T) i_H5P_flags(H5P_FLAGS_LEN) - INTEGER i_H5P_flags_int(H5P_FLAGS_INT_LEN) - INTEGER i_H5R_flags(H5R_FLAGS_LEN) - INTEGER i_H5S_flags(H5S_FLAGS_LEN) - INTEGER(HSIZE_T) i_H5S_hsize_flags(H5S_HSIZE_FLAGS_LEN) - INTEGER i_H5T_flags(H5T_FLAGS_LEN) - INTEGER i_H5Z_flags(H5Z_FLAGS_LEN) - INTEGER i_H5generic_flags(H5generic_FLAGS_LEN) - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5INIT_FLAGS_C'::h5init_flags_c - !DEC$ENDIF - END FUNCTION h5init_flags_c - END INTERFACE - INTERFACE - INTEGER FUNCTION h5init1_flags_c( i_H5LIB_flags ) - USE H5GLOBAL - INTEGER i_H5LIB_flags(H5LIB_FLAGS_LEN) - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5INIT1_FLAGS_C'::h5init1_flags_c - !DEC$ENDIF - END FUNCTION h5init1_flags_c - END INTERFACE - error_1 = h5init_types_c(predef_types, floating_types, integer_types) - error_2 = h5init_flags_c(H5D_flags, & - H5D_size_flags, & - H5E_flags, & - H5E_hid_flags, & - H5F_flags, & - H5FD_flags, & - H5FD_hid_flags, & - H5G_flags, & - H5I_flags, & - H5L_flags, & - H5O_flags, & - H5P_flags, & - H5P_flags_int, & - H5R_flags, & - H5S_flags, & - H5S_hsize_flags, & - H5T_flags, & - H5Z_flags, & - H5generic_flags) - error_3 = h5init1_flags_c(H5LIB_flags ) - error = error_1 + error_2 + error_3 - END SUBROUTINE h5open_f - -!****s* H5LIB/h5close_f -! -! NAME -! h5close_f -! -! PURPOSE -! Closes HDF5 Fortran interface. -! -! Outputs: -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! August 12, 1999 -! -! HISTORY -! Explicit Fortran interfaces were added for -! called C functions (it is needed for Windows -! port). February 28, 2001 -! -! Removed call to h5close_c since this may cause a problem for an -! application that uses HDF5 library outside HDF5 Fortran APIs. -! October 13, 2011 -! Fortran90 Interface: - SUBROUTINE h5close_f(error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(OUT) :: error -!***** - INTEGER :: error_1 - INTERFACE - INTEGER FUNCTION h5close_types_c(p_types, P_TYPES_LEN, & - f_types, F_TYPES_LEN, & - i_types, I_TYPES_LEN ) - USE H5GLOBAL - INTEGER P_TYPES_LEN - INTEGER F_TYPES_LEN - INTEGER I_TYPES_LEN - INTEGER(HID_T), DIMENSION(P_TYPES_LEN) :: p_types - INTEGER(HID_T), DIMENSION(F_TYPES_LEN) :: f_types - INTEGER(HID_T), DIMENSION(I_TYPES_LEN) :: i_types - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5CLOSE_TYPES_C'::h5close_types_c - !DEC$ENDIF - END FUNCTION h5close_types_c - END INTERFACE - error_1 = h5close_types_c(predef_types, PREDEF_TYPES_LEN, & - floating_types, FLOATING_TYPES_LEN, & - integer_types, INTEGER_TYPES_LEN ) - error = error_1 - - END SUBROUTINE h5close_f - -!****s* H5LIB/h5get_libversion_f -! -! NAME -! h5get_libversion_f -! -! PURPOSE -! Returns the HDF5 LIbrary release number -! -! Outputs: -! majnum - major version of the library -! minum - minor version of the library -! relnum - release version of the library -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 24, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5get_libversion_f(majnum, minnum, relnum, error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(OUT) :: majnum, minnum, relnum, error -!***** - INTERFACE - INTEGER FUNCTION h5get_libversion_c(majnum, minnum, relnum) - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GET_LIBVERSION_C'::h5get_libversion_c - !DEC$ENDIF - INTEGER, INTENT(OUT) :: majnum, minnum, relnum - END FUNCTION h5get_libversion_c - END INTERFACE - - error = h5get_libversion_c(majnum, minnum, relnum) - - END SUBROUTINE h5get_libversion_f - -!****s* H5LIB/h5check_version_f -! -! NAME -! h5check_version_f -! -! PURPOSE -! Verifies that library versions are consistent. -! -! Inputs: -! majnum - major version of the library -! minum - minor version of the library -! relnum - release version of the library -! -! Outputs: -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 24, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5check_version_f(majnum, minnum, relnum, error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(IN) :: majnum, minnum, relnum - INTEGER, INTENT(OUT) :: error -!***** - INTERFACE - INTEGER FUNCTION h5check_version_c(majnum, minnum, relnum) - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5CHECK_VERSION_C'::h5check_version_c - !DEC$ENDIF - INTEGER, INTENT(IN) :: majnum, minnum, relnum - END FUNCTION h5check_version_c - END INTERFACE - - error = h5check_version_c(majnum, minnum, relnum) - - END SUBROUTINE h5check_version_f -!****s* H5LIB/h5garbage_collect_f -! -! NAME -! h5garbage_collect_f -! -! PURPOSE -! Garbage collects on all free-lists of all types. -! -! Outputs: -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 24, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5garbage_collect_f(error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(OUT) :: error -!***** - INTERFACE - INTEGER FUNCTION h5garbage_collect_c() - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5GARBAGE_COLLECT_C'::h5garbage_collect_c - !DEC$ENDIF - END FUNCTION h5garbage_collect_c - END INTERFACE - - error = h5garbage_collect_c() - - END SUBROUTINE h5garbage_collect_f -!****s* H5LIB/h5dont_atexit_f -! -! NAME -! h5dont_atexit_f -! -! PURPOSE -! Instructs library not to install atexit cleanup routine. -! -! Outputs: -! error - Returns 0 if successful and -1 if fails -! -! AUTHOR -! Elena Pourmal -! September 24, 2002 -! -! Fortran90 Interface: - SUBROUTINE h5dont_atexit_f(error) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(OUT) :: error -!***** - INTERFACE - INTEGER FUNCTION h5dont_atexit_c() - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DONT_ATEXIT_C'::h5dont_atexit_c - !DEC$ENDIF - END FUNCTION h5dont_atexit_c - END INTERFACE - - error = h5dont_atexit_c() - - END SUBROUTINE h5dont_atexit_f - -!****f* H5LIB/h5kind_to_type -! -! NAME -! h5kind_to_type -! -! PURPOSE -! Converts the KIND to the correct HDF type -! -! Inputs: -! kind - Fortran KIND parameter -! flag - Whether KIND is of type INTEGER or REAL: -! H5_INTEGER_KIND - integer -! H5_REAL_KIND - real -! Outputs: -! h5_type - Returns the type -! -! AUTHOR -! M. Scot Breitenfeld -! August 25, 2008 -! -! Fortran90 Interface: - INTEGER(HID_T) FUNCTION h5kind_to_type(kind, flag) RESULT(h5_type) - USE H5GLOBAL - IMPLICIT NONE - INTEGER, INTENT(IN) :: kind - INTEGER, INTENT(IN) :: flag -!***** - IF(flag.EQ.H5_INTEGER_KIND)THEN - IF(kind.EQ.Fortran_INTEGER_1)THEN - h5_type = H5T_NATIVE_INTEGER_1 - ELSE IF(kind.EQ.Fortran_INTEGER_2)THEN - h5_type = H5T_NATIVE_INTEGER_2 - ELSE IF(kind.EQ.Fortran_INTEGER_4)THEN - h5_type = H5T_NATIVE_INTEGER_4 - ELSE IF(kind.EQ.Fortran_INTEGER_8)THEN - h5_type = H5T_NATIVE_INTEGER_8 - ENDIF - ELSE IF(flag.EQ.H5_REAL_KIND)THEN - IF(kind.EQ.Fortran_REAL_4)THEN - h5_type = H5T_NATIVE_REAL_4 - ELSE IF(kind.EQ.Fortran_REAL_8)THEN - h5_type = H5T_NATIVE_REAL_8 - ELSE IF(kind.EQ.Fortran_REAL_16)THEN - h5_type = H5T_NATIVE_REAL_16 - ENDIF - ENDIF - - END FUNCTION h5kind_to_type - -END MODULE H5LIB diff --git a/fortran/src/H5_ff_F03.f90 b/fortran/src/H5_ff_F03.f90 deleted file mode 100644 index d418ed5..0000000 --- a/fortran/src/H5_ff_F03.f90 +++ /dev/null @@ -1,75 +0,0 @@ -!****h* ROBODoc/H5LIB_PROVISIONAL -! -! NAME -! MODULE H5LIB_PROVISIONAL -! -! PURPOSE -! This file contains helper functions for Fortran 2003 features and is -! only compiled when Fortran 2003 features are enabled, otherwise -! the file H5_ff_F90.f90 is compiled. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! NOTES -! *** IMPORTANT *** -! If you add a new function you must add the function name to the -! Windows dll file 'hdf5_fortrandll.def.in' in the fortran/src directory. -! This is needed for Windows based operating systems. -!***** - -MODULE H5LIB_PROVISIONAL - -CONTAINS -!****f* H5LIB_PROVISIONAL/h5offsetof -! -! NAME -! h5offsetof -! -! PURPOSE -! Computes the offset in memory -! -! Inputs: -! start - starting pointer address -! end - ending pointer address -! -! Outputs: -! offset - offset of a member within the derived type -! -! AUTHOR -! M. Scot Breitenfeld -! Augest 25, 2008 -! -! ACKNOWLEDGEMENTS -! Joe Krahn -! -! Fortran2003 Interface: - FUNCTION h5offsetof(start,end) RESULT(offset) - USE, INTRINSIC :: ISO_C_BINDING - USE H5GLOBAL - IMPLICIT NONE - INTEGER(SIZE_T) :: offset - TYPE(C_PTR), VALUE, INTENT(IN) :: start, end -!***** - INTEGER(C_INTPTR_T) :: int_address_start, int_address_end - int_address_start = TRANSFER(start, int_address_start) - int_address_end = TRANSFER(end , int_address_end ) - - offset = int_address_end - int_address_start - - END FUNCTION h5offsetof - -END MODULE H5LIB_PROVISIONAL diff --git a/fortran/src/H5_ff_F90.f90 b/fortran/src/H5_ff_F90.f90 deleted file mode 100644 index a5d303a..0000000 --- a/fortran/src/H5_ff_F90.f90 +++ /dev/null @@ -1,34 +0,0 @@ -!****h* ROBODoc/H5LIB_PROVISIONAL (F90) -! -! NAME -! MODULE H5LIB_PROVISIONAL -! -! FILE -! fortran/src/H5_ff_F90.f90 -! -! PURPOSE -! This file is a dummy module for when Fortran 2003 features are not enabled. -! It is compiled in place of H5_ff_F03.f90 and is empty. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -!***** - -MODULE H5LIB_PROVISIONAL - - -END MODULE H5LIB_PROVISIONAL diff --git a/fortran/src/H5config_f.inc.cmake b/fortran/src/H5config_f.inc.cmake new file mode 100644 index 0000000..cc36889 --- /dev/null +++ b/fortran/src/H5config_f.inc.cmake @@ -0,0 +1,84 @@ +! fortran/src/H5config_f.inc. Generated from fortran/src/H5config_f.inc.in by configure + +! Define if we have parallel support +#define H5_HAVE_PARALLEL @CMAKE_H5_HAVE_PARALLEL@ + +#if H5_HAVE_PARALLEL==0 +#undef H5_HAVE_PARALLEL +#endif + +! Define if the intrinsic function STORAGE_SIZE exists +#define H5_FORTRAN_HAVE_STORAGE_SIZE @FORTRAN_HAVE_STORAGE_SIZE@ + +#if H5_FORTRAN_HAVE_STORAGE_SIZE==0 +#undef H5_FORTRAN_HAVE_STORAGE_SIZE +#endif + +! Define if the intrinsic function SIZEOF exists +#define H5_FORTRAN_HAVE_SIZEOF @FORTRAN_HAVE_SIZEOF@ + +#if H5_FORTRAN_HAVE_SIZEOF==0 +#undef H5_FORTRAN_HAVE_SIZEOF +#endif + +! Define if the intrinsic function C_SIZEOF exists +#define H5_FORTRAN_HAVE_C_SIZEOF @FORTRAN_HAVE_C_SIZEOF@ + +#if H5_FORTRAN_HAVE_C_SIZEOF==0 +#undef H5_FORTRAN_HAVE_C_SIZEOF +#endif + +! Define if the intrinsic C_LONG_DOUBLE exists +#define H5_FORTRAN_HAVE_C_LONG_DOUBLE @FORTRAN_HAVE_C_LONG_DOUBLE@ + +#if H5_FORTRAN_HAVE_C_LONG_DOUBLE==0 +#undef H5_FORTRAN_HAVE_C_LONG_DOUBLE +#endif + +! Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE +#define H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ + +! Define if the intrinsic module ISO_FORTRAN_ENV exists +#define H5_HAVE_ISO_FORTRAN_ENV @HAVE_ISO_FORTRAN_ENV@ + + +! should this be ${HDF_PREFIX} instead of H5 MSB +#define H5_SIZEOF_DOUBLE @H5_SIZEOF_DOUBLE@ + +#if H5_SIZEOF_DOUBLE==0 +#undef H5_SIZEOF_DOUBLE +#endif + +! should this be ${HDF_PREFIX} instead of H5 MSB +#define H5_SIZEOF_LONG_DOUBLE @H5_SIZEOF_LONG_DOUBLE@ + +#if H5_SIZEOF_LONG_DOUBLE==0 +#undef H5_SIZEOF_LONG_DOUBLE +#endif + +! Define the maximum decimal precision for reals +#define H5_PAC_FC_MAX_REAL_PRECISION @H5_PAC_FC_MAX_REAL_PRECISION@ + +! If C has quad precision +#define H5_HAVE_FLOAT128 @H5_HAVE_FLOAT128@ + +! Define if INTEGER*16 is available +#define H5_HAVE_Fortran_INTEGER_SIZEOF_16 @HAVE_Fortran_INTEGER_SIZEOF_16@ + +! Maximum decimal precision for C +#define H5_PAC_C_MAX_REAL_PRECISION @H5_PAC_C_MAX_REAL_PRECISION@ + +! number of valid REAL KINDs +#define H5_H5CONFIG_F_NUM_RKIND @H5CONFIG_F_NUM_RKIND@ + +! valid REAL KINDs (need to have a matching C counter-part) +#define H5_H5CONFIG_F_RKIND @H5CONFIG_F_RKIND@ + +! valid REAL KINDs (need to have a matching C counter-part) +#define H5_H5CONFIG_F_RKIND_SIZEOF @H5CONFIG_F_RKIND_SIZEOF@ + +! number of valid INTEGER KINDs +#define H5_H5CONFIG_F_NUM_IKIND @H5CONFIG_F_NUM_IKIND@ + +! valid INTEGER KINDs (need to have a matching C counter-part) +#define H5_H5CONFIG_F_IKIND @H5CONFIG_F_IKIND@ diff --git a/fortran/src/H5config_f.inc.in b/fortran/src/H5config_f.inc.in new file mode 100644 index 0000000..64c3a0c --- /dev/null +++ b/fortran/src/H5config_f.inc.in @@ -0,0 +1,59 @@ +! fortran/src/H5config_f.inc. Generated from fortran/src/H5config_f.inc.in by configure + +! The script to replace the defines in H5config_f.inc.in is +! located in configure.ac in the Fortran section. + +! Define if we have parallel support +#undef HAVE_PARALLEL + +! Define if the intrinsic function STORAGE_SIZE exists +#undef FORTRAN_HAVE_STORAGE_SIZE + +! Define if the intrinsic function SIZEOF exists +#undef FORTRAN_HAVE_SIZEOF + +! Define if the intrinsic function C_SIZEOF exists +#undef FORTRAN_HAVE_C_SIZEOF + +! Define if the intrinsic function C_LONG_DOUBLE exists +#undef FORTRAN_HAVE_C_LONG_DOUBLE + +! Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE +#undef FORTRAN_C_LONG_DOUBLE_IS_UNIQUE + +! Define if the intrinsic module ISO_FORTRAN_ENV exists +#undef HAVE_ISO_FORTRAN_ENV + +! Define the size of C's long double +#undef SIZEOF_DOUBLE + +! Define the size of C's long double +#undef SIZEOF_LONG_DOUBLE + +! Define the maximum decimal precision for reals +#undef PAC_FC_MAX_REAL_PRECISION + +! If C has quad precision +#undef HAVE_FLOAT128 + +! Define if INTEGER*16 is available +#undef HAVE_Fortran_INTEGER_SIZEOF_16 + +! Maximum decimal precision for C +#undef PAC_C_MAX_REAL_PRECISION + +! number of valid REAL KINDs +#undef H5CONFIG_F_NUM_RKIND + +! valid REAL KINDs (need to have a matching C counter-part) +#undef H5CONFIG_F_RKIND + +! valid REAL KINDs (need to have a matching C counter-part) +#undef H5CONFIG_F_RKIND_SIZEOF + +! number of valid INTEGER KINDs +#undef H5CONFIG_F_NUM_IKIND + +! valid INTEGER KINDs (need to have a matching C counter-part) +#undef H5CONFIG_F_IKIND + diff --git a/fortran/src/H5f90global.F90 b/fortran/src/H5f90global.F90 new file mode 100644 index 0000000..c88327c --- /dev/null +++ b/fortran/src/H5f90global.F90 @@ -0,0 +1,1040 @@ +!****h* ROBODoc/H5GLOBAL +! +! NAME +! MODULE H5GLOBAL +! +! FILE +! src/fortran/H5f90global.f90 +! +! PURPOSE +! This module is used to pass C stubs for H5 Fortran APIs. The C stubs are +! packed into arrays in H5_f.c and these arrays are then passed to Fortran. +! This module then uses EQUIVALENCE to assign elements of the arrays to +! Fortran equivalent C stubs. +! +! NOTES +! The size of the C arrays in H5_f.c has to match the values of the variables +! declared as PARAMETER, hence if the size of an array in H5_f.c is changed +! then the PARAMETER of that corresponding array in Fortran must also be changed. +! +! USES +! H5FORTRAN_TYPES - This module is generated at run time. See +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! AUTHOR +! Elena Pourmal +! +!***** + +MODULE H5GLOBAL + USE H5FORTRAN_TYPES + + IMPLICIT NONE + + ! Definitions for reference datatypes. + ! If you change the value of these parameters, do not forget to change corresponding + ! values in the H5f90.h file. + INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 + + ! Parameters used in the function 'h5kind_to_type' located in H5_ff.f90. + ! The flag is used to tell the function whether the kind input variable + ! is for a REAL or INTEGER data type. + + INTEGER, PARAMETER :: H5_REAL_KIND = 1 + INTEGER, PARAMETER :: H5_INTEGER_KIND = 0 + + TYPE :: hobj_ref_t_f + INTEGER(HADDR_T) ref + END TYPE hobj_ref_t_f + + TYPE :: hdset_reg_ref_t_f + INTEGER, DIMENSION(1:REF_REG_BUF_LEN) :: ref + END TYPE hdset_reg_ref_t_f + + INTEGER, PARAMETER :: PREDEF_TYPES_LEN = 19 ! Do not forget to change this + ! value when new predefined + ! datatypes are added + + ! Do not forget to change the following line when new predefined + ! floating data types are added + INTEGER, PARAMETER :: FLOATING_TYPES_LEN = 4 + + ! Do not forget to change the following line when new predefined + ! integer data types are added + INTEGER, PARAMETER :: INTEGER_TYPES_LEN = 27 + + INTEGER(HID_T) :: H5T_NATIVE_INTEGER_1, & + H5T_NATIVE_INTEGER_2, & + H5T_NATIVE_INTEGER_4, & + H5T_NATIVE_INTEGER_8, & + H5T_NATIVE_REAL_C_FLOAT, & + H5T_NATIVE_REAL_C_DOUBLE, & + H5T_NATIVE_REAL_C_LONG_DOUBLE, & + H5T_NATIVE_INTEGER, & + H5T_NATIVE_REAL, & + H5T_NATIVE_DOUBLE, & + H5T_NATIVE_CHARACTER , & + H5T_STD_REF_OBJ, & + H5T_STD_REF_DSETREG, & + H5T_IEEE_F32BE, & + H5T_IEEE_F32LE, & + H5T_IEEE_F64BE, & + H5T_IEEE_F64LE, & + H5T_STD_I8BE, & + H5T_STD_I8LE, & + H5T_STD_I16BE, & + H5T_STD_I16LE, & + H5T_STD_I32BE, & + H5T_STD_I32LE, & + H5T_STD_I64BE, & + H5T_STD_I64LE, & + H5T_STD_U8BE, & + H5T_STD_U8LE, & + H5T_STD_U16BE, & + H5T_STD_U16LE, & + H5T_STD_U32BE + + INTEGER(HID_T) :: H5T_NATIVE_INTEGER_16 ! NEED IFDEF -MSB- + INTEGER(HID_T) :: H5T_NATIVE_FLOAT_128 ! NEED IFDEF -MSB- + +! NOTE: Splitting the line since the Fortran 95 standard limits the number of +! continuation lines to 39; the F03/F08 standard limits the number +! to 255 lines. + + INTEGER(HID_T) :: H5T_STD_U32LE, & + H5T_STD_U64BE, & + H5T_STD_U64LE, & + H5T_STRING, & + H5T_STD_B8BE, & + H5T_STD_B8LE, & + H5T_STD_B16BE, & + H5T_STD_B16LE, & + H5T_STD_B32BE, & + H5T_STD_B32LE, & + H5T_STD_B64BE, & + H5T_STD_B64LE, & + H5T_NATIVE_B8, & + H5T_NATIVE_B16, & + H5T_NATIVE_B32, & + H5T_NATIVE_B64, & + H5T_FORTRAN_S1, & + H5T_C_S1 + + + INTEGER(HID_T), DIMENSION(PREDEF_TYPES_LEN) :: predef_types + EQUIVALENCE (predef_types(1), H5T_NATIVE_INTEGER) + EQUIVALENCE (predef_types(2), H5T_NATIVE_REAL) + EQUIVALENCE (predef_types(3), H5T_NATIVE_DOUBLE) + EQUIVALENCE (predef_types(4), H5T_NATIVE_CHARACTER) + EQUIVALENCE (predef_types(5), H5T_STD_REF_OBJ) + EQUIVALENCE (predef_types(6), H5T_STD_REF_DSETREG) + EQUIVALENCE (predef_types(7), H5T_NATIVE_INTEGER_1) + EQUIVALENCE (predef_types(8), H5T_NATIVE_INTEGER_2) + EQUIVALENCE (predef_types(9), H5T_NATIVE_INTEGER_4) + EQUIVALENCE (predef_types(10), H5T_NATIVE_INTEGER_8) + EQUIVALENCE (predef_types(11), H5T_NATIVE_REAL_C_FLOAT) + EQUIVALENCE (predef_types(12), H5T_NATIVE_REAL_C_DOUBLE) + EQUIVALENCE (predef_types(13), H5T_NATIVE_REAL_C_LONG_DOUBLE) + EQUIVALENCE (predef_types(14), H5T_NATIVE_B8 ) + EQUIVALENCE (predef_types(15), H5T_NATIVE_B16) + EQUIVALENCE (predef_types(16), H5T_NATIVE_B32) + EQUIVALENCE (predef_types(17), H5T_NATIVE_B64) + EQUIVALENCE (predef_types(18), H5T_NATIVE_INTEGER_16) ! ADDED NEW TYPE -MSB- + EQUIVALENCE (predef_types(19), H5T_NATIVE_FLOAT_128) ! ADDED NEW TYPE -MSB- + + INTEGER(HID_T), DIMENSION(FLOATING_TYPES_LEN) :: floating_types + EQUIVALENCE (floating_types(1), H5T_IEEE_F32BE ) + EQUIVALENCE (floating_types(2), H5T_IEEE_F32LE) + EQUIVALENCE (floating_types(3), H5T_IEEE_F64BE) + EQUIVALENCE (floating_types(4), H5T_IEEE_F64LE) + + INTEGER(HID_T), DIMENSION(INTEGER_TYPES_LEN) :: integer_types + EQUIVALENCE (integer_types(1), H5T_STD_I8BE ) + EQUIVALENCE (integer_types(2), H5T_STD_I8LE) + EQUIVALENCE (integer_types(3), H5T_STD_I16BE) + EQUIVALENCE (integer_types(4), H5T_STD_I16LE) + EQUIVALENCE (integer_types(5), H5T_STD_I32BE) + EQUIVALENCE (integer_types(6), H5T_STD_I32LE) + EQUIVALENCE (integer_types(7), H5T_STD_I64BE) + EQUIVALENCE (integer_types(8), H5T_STD_I64LE) + EQUIVALENCE (integer_types(9), H5T_STD_U8BE) + EQUIVALENCE (integer_types(10), H5T_STD_U8LE) + EQUIVALENCE (integer_types(11), H5T_STD_U16BE) + EQUIVALENCE (integer_types(12), H5T_STD_U16LE) + EQUIVALENCE (integer_types(13), H5T_STD_U32BE) + EQUIVALENCE (integer_types(14), H5T_STD_U32LE) + EQUIVALENCE (integer_types(15), H5T_STD_U64BE) + EQUIVALENCE (integer_types(16), H5T_STD_U64LE) + EQUIVALENCE (integer_types(17), H5T_STRING) + EQUIVALENCE (integer_types(18), H5T_STD_B8BE) + EQUIVALENCE (integer_types(19), H5T_STD_B8LE) + EQUIVALENCE (integer_types(20), H5T_STD_B16BE) + EQUIVALENCE (integer_types(21), H5T_STD_B16LE) + EQUIVALENCE (integer_types(22), H5T_STD_B32BE) + EQUIVALENCE (integer_types(23), H5T_STD_B32LE) + EQUIVALENCE (integer_types(24), H5T_STD_B64BE) + EQUIVALENCE (integer_types(25), H5T_STD_B64LE) + EQUIVALENCE (integer_types(26), H5T_FORTRAN_S1) + EQUIVALENCE (integer_types(27), H5T_C_S1) + + + ! COMMON /PREDEFINED_TYPES/ H5T_NATIVE_INTEGER, & + ! H5T_NATIVE_REAL, & + ! H5T_NATIVE_DOUBLE, & + ! H5T_NATIVE_CHARACTER, & + ! H5T_STD_REF_OBJ, & + ! H5T_STD_REF_DSETREG + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /PREDEFINED_TYPES/ + !DEC$endif + COMMON /PREDEFINED_TYPES/ predef_types + + ! COMMON /FLOATING_TYPES/ H5T_IEEE_F32BE, & + ! H5T_IEEE_F32LE, & + ! H5T_IEEE_F64BE, & + ! H5T_IEEE_F64LE + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /FLOATING_TYPES/ + !DEC$endif + COMMON /FLOATING_TYPES/ floating_types + ! + ! COMMON /INTEGER_TYPES/ H5T_STD_I8BE, & + ! H5T_STD_I8LE, & + ! H5T_STD_I16BE, & + ! H5T_STD_I16LE, & + ! H5T_STD_I32BE, & + ! H5T_STD_I32LE, & + ! H5T_STD_I64BE, & + ! H5T_STD_I64LE, & + ! H5T_STD_U8BE, & + ! H5T_STD_U8LE, & + ! H5T_STD_U16BE, & + ! H5T_STD_U16LE, & + ! H5T_STD_U32BE, & + ! H5T_STD_U32LE, & + ! H5T_STD_U64BE, & + ! H5T_STD_U64LE + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /INTEGER_TYPES/ + !DEC$endif + COMMON /INTEGER_TYPES/ integer_types + ! + ! Fortran flags + ! + ! + ! H5F flags (DO NOT FORGET TO UPDATE WHEN NEW FLAGS ARE ADDED !) + ! + ! H5F flags declaration + ! + INTEGER, PARAMETER :: H5F_FLAGS_LEN = 19 + INTEGER :: H5F_flags(H5F_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5F_FLAGS/ + !DEC$endif + COMMON /H5F_FLAGS/ H5F_flags + + INTEGER :: H5F_ACC_RDWR_F + INTEGER :: H5F_ACC_RDONLY_F + INTEGER :: H5F_ACC_TRUNC_F + INTEGER :: H5F_ACC_EXCL_F + INTEGER :: H5F_ACC_DEBUG_F + INTEGER :: H5F_SCOPE_LOCAL_F + INTEGER :: H5F_SCOPE_GLOBAL_F + INTEGER :: H5F_CLOSE_DEFAULT_F + INTEGER :: H5F_CLOSE_WEAK_F + INTEGER :: H5F_CLOSE_SEMI_F + INTEGER :: H5F_CLOSE_STRONG_F + INTEGER :: H5F_OBJ_FILE_F + INTEGER :: H5F_OBJ_DATASET_F + INTEGER :: H5F_OBJ_GROUP_F + INTEGER :: H5F_OBJ_DATATYPE_F + INTEGER :: H5F_OBJ_ALL_F + INTEGER :: H5F_LIBVER_EARLIEST_F + INTEGER :: H5F_LIBVER_LATEST_F + INTEGER :: H5F_UNLIMITED_F + + EQUIVALENCE(H5F_flags(1), H5F_ACC_RDWR_F) + EQUIVALENCE(H5F_flags(2), H5F_ACC_RDONLY_F) + EQUIVALENCE(H5F_flags(3), H5F_ACC_TRUNC_F) + EQUIVALENCE(H5F_flags(4), H5F_ACC_EXCL_F) + EQUIVALENCE(H5F_flags(5), H5F_ACC_DEBUG_F) + EQUIVALENCE(H5F_flags(6), H5F_SCOPE_LOCAL_F) + EQUIVALENCE(H5F_flags(7), H5F_SCOPE_GLOBAL_F) + EQUIVALENCE(H5F_flags(8), H5F_CLOSE_DEFAULT_F) + EQUIVALENCE(H5F_flags(9), H5F_CLOSE_WEAK_F) + EQUIVALENCE(H5F_flags(10), H5F_CLOSE_SEMI_F) + EQUIVALENCE(H5F_flags(11), H5F_CLOSE_STRONG_F) + EQUIVALENCE(H5F_flags(12), H5F_OBJ_FILE_F) + EQUIVALENCE(H5F_flags(13), H5F_OBJ_DATASET_F) + EQUIVALENCE(H5F_flags(14), H5F_OBJ_GROUP_F) + EQUIVALENCE(H5F_flags(15), H5F_OBJ_DATATYPE_F) + EQUIVALENCE(H5F_flags(16), H5F_OBJ_ALL_F) + EQUIVALENCE(H5F_flags(17), H5F_LIBVER_EARLIEST_F) + EQUIVALENCE(H5F_flags(18), H5F_LIBVER_LATEST_F) + EQUIVALENCE(H5F_flags(19), H5F_UNLIMITED_F) + ! + ! H5generic flags declaration + ! + INTEGER, PARAMETER :: H5generic_FLAGS_LEN = 9 + INTEGER :: H5generic_flags(H5generic_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5generic_FLAGS/ + !DEC$endif + COMMON /H5generic_FLAGS/ H5generic_flags + + INTEGER :: H5_INDEX_UNKNOWN_F + INTEGER :: H5_INDEX_NAME_F + INTEGER :: H5_INDEX_CRT_ORDER_F + INTEGER :: H5_INDEX_N_F + INTEGER :: H5_ITER_UNKNOWN_F + INTEGER :: H5_ITER_INC_F + INTEGER :: H5_ITER_DEC_F + INTEGER :: H5_ITER_NATIVE_F + INTEGER :: H5_ITER_N_F + + EQUIVALENCE(H5generic_flags(1), H5_INDEX_UNKNOWN_F) + EQUIVALENCE(H5generic_flags(2), H5_INDEX_NAME_F) + EQUIVALENCE(H5generic_flags(3), H5_INDEX_CRT_ORDER_F) + EQUIVALENCE(H5generic_flags(4), H5_INDEX_N_F) + EQUIVALENCE(H5generic_flags(5), H5_ITER_UNKNOWN_F) + EQUIVALENCE(H5generic_flags(6), H5_ITER_INC_F) + EQUIVALENCE(H5generic_flags(7), H5_ITER_DEC_F) + EQUIVALENCE(H5generic_flags(8), H5_ITER_NATIVE_F) + EQUIVALENCE(H5generic_flags(9), H5_ITER_N_F) + ! + ! H5G flags declaration + ! + INTEGER, PARAMETER :: H5G_FLAGS_LEN = 12 + INTEGER :: H5G_flags(H5G_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5G_FLAGS/ + !DEC$endif + COMMON /H5G_FLAGS/ H5G_flags + + INTEGER :: H5G_UNKNOWN_F + INTEGER :: H5G_GROUP_F + INTEGER :: H5G_DATASET_F + INTEGER :: H5G_TYPE_F + INTEGER :: H5G_LINK_F + INTEGER :: H5G_UDLINK_F + INTEGER :: H5G_SAME_LOC_F + INTEGER :: H5G_LINK_ERROR_F + INTEGER :: H5G_LINK_HARD_F + INTEGER :: H5G_LINK_SOFT_F + INTEGER :: H5G_STORAGE_TYPE_UNKNOWN_F + INTEGER :: H5G_STORAGE_TYPE_SYMBOL_TABLE_F + INTEGER :: H5G_STORAGE_TYPE_COMPACT_F + INTEGER :: H5G_STORAGE_TYPE_DENSE_F + + EQUIVALENCE(H5G_flags(1), H5G_UNKNOWN_F) ! Unknown object type + EQUIVALENCE(H5G_flags(2), H5G_GROUP_F) ! Object is a group + EQUIVALENCE(H5G_flags(3), H5G_DATASET_F) ! Object is a dataset + EQUIVALENCE(H5G_flags(4), H5G_TYPE_F) ! Object is a named data type + EQUIVALENCE(H5G_flags(5), H5G_SAME_LOC_F) + EQUIVALENCE(H5G_flags(6), H5G_LINK_ERROR_F) + EQUIVALENCE(H5G_flags(7), H5G_LINK_HARD_F) + EQUIVALENCE(H5G_flags(8), H5G_LINK_SOFT_F) + + EQUIVALENCE(H5G_flags(9), H5G_STORAGE_TYPE_UNKNOWN_F ) + EQUIVALENCE(H5G_flags(10), H5G_STORAGE_TYPE_SYMBOL_TABLE_F) + EQUIVALENCE(H5G_flags(11), H5G_STORAGE_TYPE_COMPACT_F) + EQUIVALENCE(H5G_flags(12), H5G_STORAGE_TYPE_DENSE_F) + ! + ! H5D flags declaration + ! + + INTEGER, PARAMETER :: H5D_FLAGS_LEN = 25 + INTEGER :: H5D_flags(H5D_FLAGS_LEN) + INTEGER, PARAMETER :: H5D_SIZE_FLAGS_LEN = 2 + INTEGER(SIZE_T) :: H5D_size_flags(H5D_SIZE_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5D_FLAGS/ + !DEC$ATTRIBUTES DLLEXPORT :: /H5D_SIZE_FLAGS/ + !DEC$endif + COMMON /H5D_FLAGS/ H5D_flags + COMMON /H5D_SIZE_FLAGS/ H5D_size_flags + + INTEGER :: H5D_COMPACT_F + INTEGER :: H5D_CONTIGUOUS_F + INTEGER :: H5D_CHUNKED_F + + INTEGER :: H5D_ALLOC_TIME_ERROR_F + INTEGER :: H5D_ALLOC_TIME_DEFAULT_F + INTEGER :: H5D_ALLOC_TIME_EARLY_F + INTEGER :: H5D_ALLOC_TIME_LATE_F + INTEGER :: H5D_ALLOC_TIME_INCR_F + + INTEGER :: H5D_SPACE_STS_ERROR_F + INTEGER :: H5D_SPACE_STS_NOT_ALLOCATED_F + INTEGER :: H5D_SPACE_STS_PART_ALLOCATED_F + INTEGER :: H5D_SPACE_STS_ALLOCATED_F + + INTEGER :: H5D_FILL_TIME_ERROR_F + INTEGER :: H5D_FILL_TIME_ALLOC_F + INTEGER :: H5D_FILL_TIME_NEVER_F + + INTEGER :: H5D_FILL_VALUE_ERROR_F + INTEGER :: H5D_FILL_VALUE_UNDEFINED_F + INTEGER :: H5D_FILL_VALUE_DEFAULT_F + INTEGER :: H5D_FILL_VALUE_USER_DEFINED_F + +! shortened "_DEFAULT" to "_DFLT" to satisfy the limit of 31 +! characters for variable names in Fortran. +! shortened "_CONTIGUOUS" to "_CONTIG" to satisfy the limit of 31 +! characters for variable names in Fortran. + + INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NSLOTS_DFLT_F + INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NBYTES_DFLT_F + INTEGER :: H5D_CHUNK_CACHE_W0_DFLT_F + INTEGER :: H5D_MPIO_NO_COLLECTIVE_F + INTEGER :: H5D_MPIO_CHUNK_INDEPENDENT_F + INTEGER :: H5D_MPIO_CHUNK_COLLECTIVE_F + INTEGER :: H5D_MPIO_CHUNK_MIXED_F + INTEGER :: H5D_MPIO_CONTIG_COLLECTIVE_F + + EQUIVALENCE(H5D_flags(1), H5D_COMPACT_F) + EQUIVALENCE(H5D_flags(2), H5D_CONTIGUOUS_F) + EQUIVALENCE(H5D_flags(3), H5D_CHUNKED_F) + + EQUIVALENCE(H5D_flags(4), H5D_ALLOC_TIME_ERROR_F) + EQUIVALENCE(H5D_flags(5), H5D_ALLOC_TIME_DEFAULT_F) + EQUIVALENCE(H5D_flags(6), H5D_ALLOC_TIME_EARLY_F) + EQUIVALENCE(H5D_flags(7), H5D_ALLOC_TIME_LATE_F) + EQUIVALENCE(H5D_flags(8), H5D_ALLOC_TIME_INCR_F) + + EQUIVALENCE(H5D_flags(9), H5D_SPACE_STS_ERROR_F) + EQUIVALENCE(H5D_flags(10), H5D_SPACE_STS_NOT_ALLOCATED_F) + EQUIVALENCE(H5D_flags(11), H5D_SPACE_STS_PART_ALLOCATED_F) + EQUIVALENCE(H5D_flags(12), H5D_SPACE_STS_ALLOCATED_F) + + EQUIVALENCE(H5D_flags(13), H5D_FILL_TIME_ERROR_F) + EQUIVALENCE(H5D_flags(14), H5D_FILL_TIME_ALLOC_F) + EQUIVALENCE(H5D_flags(15), H5D_FILL_TIME_NEVER_F) + + EQUIVALENCE(H5D_flags(16), H5D_FILL_VALUE_ERROR_F) + EQUIVALENCE(H5D_flags(17), H5D_FILL_VALUE_UNDEFINED_F) + EQUIVALENCE(H5D_flags(18), H5D_FILL_VALUE_DEFAULT_F) + EQUIVALENCE(H5D_flags(19), H5D_FILL_VALUE_USER_DEFINED_F) + + EQUIVALENCE(H5D_flags(20), H5D_CHUNK_CACHE_W0_DFLT_F) + EQUIVALENCE(H5D_flags(21), H5D_MPIO_NO_COLLECTIVE_F) + EQUIVALENCE(H5D_flags(22), H5D_MPIO_CHUNK_INDEPENDENT_F) + EQUIVALENCE(H5D_flags(23), H5D_MPIO_CHUNK_COLLECTIVE_F) + EQUIVALENCE(H5D_flags(24), H5D_MPIO_CHUNK_MIXED_F) + EQUIVALENCE(H5D_flags(25), H5D_MPIO_CONTIG_COLLECTIVE_F) + + EQUIVALENCE(H5D_size_flags(1), H5D_CHUNK_CACHE_NSLOTS_DFLT_F) + EQUIVALENCE(H5D_size_flags(2), H5D_CHUNK_CACHE_NBYTES_DFLT_F) + + ! + ! H5E flags declaration + ! + INTEGER, PARAMETER :: H5E_FLAGS_LEN = 4 + INTEGER :: H5E_flags(H5E_FLAGS_LEN) + INTEGER, PARAMETER :: H5E_HID_FLAGS_LEN = 1 + INTEGER(HID_T) :: H5E_hid_flags(H5E_HID_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5E_FLAGS/ + !DEC$ATTRIBUTES DLLEXPORT :: /H5E_HID_FLAGS/ + !DEC$endif + COMMON /H5E_FLAGS/ H5E_flags + COMMON /H5E_HID_FLAGS/ H5E_hid_flags + + INTEGER(HID_T) :: H5E_DEFAULT_F + INTEGER :: H5E_MAJOR_F + INTEGER :: H5E_MINOR_F + INTEGER :: H5E_WALK_UPWARD_F + INTEGER :: H5E_WALK_DOWNWARD_F + + EQUIVALENCE(H5E_hid_flags(1), H5E_DEFAULT_F) + EQUIVALENCE(H5E_flags(1) , H5E_MAJOR_F) + EQUIVALENCE(H5E_flags(2) , H5E_MINOR_F) + EQUIVALENCE(H5E_flags(3) , H5E_WALK_UPWARD_F) + EQUIVALENCE(H5E_flags(4) , H5E_WALK_DOWNWARD_F) + + ! + ! H5FD flags declaration + ! + INTEGER, PARAMETER :: H5FD_FLAGS_LEN = 11 + INTEGER :: H5FD_flags(H5FD_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5FD_FLAGS/ + !DEC$endif + COMMON /H5FD_FLAGS/ H5FD_flags + + INTEGER :: H5FD_MPIO_INDEPENDENT_F + INTEGER :: H5FD_MPIO_COLLECTIVE_F + INTEGER :: H5FD_MEM_NOLIST_F + INTEGER :: H5FD_MEM_DEFAULT_F + INTEGER :: H5FD_MEM_SUPER_F + INTEGER :: H5FD_MEM_BTREE_F + INTEGER :: H5FD_MEM_DRAW_F + INTEGER :: H5FD_MEM_GHEAP_F + INTEGER :: H5FD_MEM_LHEAP_F + INTEGER :: H5FD_MEM_OHDR_F + INTEGER :: H5FD_MEM_NTYPES_F + + EQUIVALENCE(H5FD_flags(1), H5FD_MPIO_INDEPENDENT_F) + EQUIVALENCE(H5FD_flags(2), H5FD_MPIO_COLLECTIVE_F) + EQUIVALENCE(H5FD_flags(3), H5FD_MEM_NOLIST_F) + EQUIVALENCE(H5FD_flags(4), H5FD_MEM_DEFAULT_F) + EQUIVALENCE(H5FD_flags(5), H5FD_MEM_SUPER_F) + EQUIVALENCE(H5FD_flags(6), H5FD_MEM_BTREE_F) + EQUIVALENCE(H5FD_flags(7), H5FD_MEM_DRAW_F) + EQUIVALENCE(H5FD_flags(8), H5FD_MEM_GHEAP_F) + EQUIVALENCE(H5FD_flags(9), H5FD_MEM_LHEAP_F) + EQUIVALENCE(H5FD_flags(10), H5FD_MEM_OHDR_F) + EQUIVALENCE(H5FD_flags(11), H5FD_MEM_NTYPES_F) + ! + ! H5FD file drivers flags declaration + ! + INTEGER, PARAMETER :: H5FD_HID_FLAGS_LEN = 7 + INTEGER(HID_T) :: H5FD_hid_flags(H5FD_HID_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5FD_HID_FLAGS/ + !DEC$endif + COMMON /H5FD_HID_FLAGS/ H5FD_hid_flags + + INTEGER(HID_T) :: H5FD_CORE_F + INTEGER(HID_T) :: H5FD_FAMILY_F + INTEGER(HID_T) :: H5FD_LOG_F + INTEGER(HID_T) :: H5FD_MPIO_F + INTEGER(HID_T) :: H5FD_MULTI_F + INTEGER(HID_T) :: H5FD_SEC2_F + INTEGER(HID_T) :: H5FD_STDIO_F + + EQUIVALENCE(H5FD_hid_flags(1), H5FD_CORE_F) + EQUIVALENCE(H5FD_hid_flags(2), H5FD_FAMILY_F) + EQUIVALENCE(H5FD_hid_flags(3), H5FD_LOG_F) + EQUIVALENCE(H5FD_hid_flags(4), H5FD_MPIO_F) + EQUIVALENCE(H5FD_hid_flags(5), H5FD_MULTI_F) + EQUIVALENCE(H5FD_hid_flags(6), H5FD_SEC2_F) + EQUIVALENCE(H5FD_hid_flags(7), H5FD_STDIO_F) + + ! + ! H5I flags declaration + ! + INTEGER, PARAMETER :: H5I_FLAGS_LEN = 7 + INTEGER :: H5I_flags(H5I_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5I_FLAGS/ + !DEC$endif + COMMON /H5I_FLAGS/ H5I_flags + + INTEGER :: H5I_FILE_F + INTEGER :: H5I_GROUP_F + INTEGER :: H5I_DATATYPE_F + INTEGER :: H5I_DATASPACE_F + INTEGER :: H5I_DATASET_F + INTEGER :: H5I_ATTR_F + INTEGER :: H5I_BADID_F + + EQUIVALENCE(H5I_flags(1), H5I_FILE_F) + EQUIVALENCE(H5I_flags(2), H5I_GROUP_F) + EQUIVALENCE(H5I_flags(3), H5I_DATATYPE_F) + EQUIVALENCE(H5I_flags(4), H5I_DATASPACE_F) + EQUIVALENCE(H5I_flags(5), H5I_DATASET_F) + EQUIVALENCE(H5I_flags(6), H5I_ATTR_F) + EQUIVALENCE(H5I_flags(7), H5I_BADID_F) + ! + ! H5L flags declaration + ! + INTEGER, PARAMETER :: H5L_FLAGS_LEN = 6 + INTEGER :: H5L_flags(H5L_FLAGS_LEN) + + INTEGER :: H5L_TYPE_ERROR_F + INTEGER :: H5L_TYPE_HARD_F + INTEGER :: H5L_TYPE_SOFT_F + INTEGER :: H5L_TYPE_EXTERNAL_F + INTEGER :: H5L_SAME_LOC_F + INTEGER :: H5L_LINK_CLASS_T_VERS_F + + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5L_FLAGS/ + !DEC$endif + COMMON /H5L_FLAGS/ H5L_flags + + EQUIVALENCE(H5L_flags(1), H5L_TYPE_ERROR_F) + EQUIVALENCE(H5L_flags(2), H5L_TYPE_HARD_F) + EQUIVALENCE(H5L_flags(3), H5L_TYPE_SOFT_F) + EQUIVALENCE(H5L_flags(4), H5L_TYPE_EXTERNAL_F) + EQUIVALENCE(H5L_flags(5), H5L_SAME_LOC_F) + EQUIVALENCE(H5L_flags(6), H5L_LINK_CLASS_T_VERS_F) + ! + ! H5O flags declaration + ! + INTEGER, PARAMETER :: H5O_FLAGS_LEN = 27 + INTEGER :: H5o_flags(H5O_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5O_FLAGS/ + !DEC$endif + COMMON /H5O_FLAGS/ H5O_flags + + INTEGER :: H5O_COPY_SHALLOW_HIERARCHY_F ! *** THESE VARIABLES DO + INTEGER :: H5O_COPY_EXPAND_SOFT_LINK_F ! NOT MATCH THE C VARIABLE + INTEGER :: H5O_COPY_EXPAND_EXT_LINK_F ! IN ORDER + INTEGER :: H5O_COPY_EXPAND_REFERENCE_F ! TO STAY UNDER THE + INTEGER :: H5O_COPY_WITHOUT_ATTR_FLAG_F + INTEGER :: H5O_COPY_PRESERVE_NULL_FLAG_F + INTEGER :: H5O_COPY_ALL_F + INTEGER :: H5O_SHMESG_NONE_FLAG_F + INTEGER :: H5O_SHMESG_SDSPACE_FLAG_F + INTEGER :: H5O_SHMESG_DTYPE_FLAG_F + INTEGER :: H5O_SHMESG_FILL_FLAG_F + INTEGER :: H5O_SHMESG_PLINE_FLAG_F + INTEGER :: H5O_SHMESG_ATTR_FLAG_F + INTEGER :: H5O_SHMESG_ALL_FLAG_F + INTEGER :: H5O_HDR_CHUNK0_SIZE_F + INTEGER :: H5O_HDR_ATTR_CRT_ORDER_TRACK_F ! 32 CHARACTER + INTEGER :: H5O_HDR_ATTR_CRT_ORDER_INDEX_F ! VARIABLE + INTEGER :: H5O_HDR_ATTR_STORE_PHASE_CHA_F ! LENGTH *** + INTEGER :: H5O_HDR_STORE_TIMES_F + INTEGER :: H5O_HDR_ALL_FLAGS_F + INTEGER :: H5O_SHMESG_MAX_NINDEXES_F + INTEGER :: H5O_SHMESG_MAX_LIST_SIZE_F + INTEGER :: H5O_TYPE_UNKNOWN_F + INTEGER :: H5O_TYPE_GROUP_F + INTEGER :: H5O_TYPE_DATASET_F + INTEGER :: H5O_TYPE_NAMED_DATATYPE_F + INTEGER :: H5O_TYPE_NTYPES_F + + EQUIVALENCE(h5o_flags(1) , H5O_COPY_SHALLOW_HIERARCHY_F) + EQUIVALENCE(h5o_flags(2) , H5O_COPY_EXPAND_SOFT_LINK_F) + EQUIVALENCE(h5o_flags(3) , H5O_COPY_EXPAND_EXT_LINK_F) + EQUIVALENCE(h5o_flags(4) , H5O_COPY_EXPAND_REFERENCE_F) + EQUIVALENCE(h5o_flags(5) , H5O_COPY_WITHOUT_ATTR_FLAG_F) + EQUIVALENCE(h5o_flags(6) , H5O_COPY_PRESERVE_NULL_FLAG_F) + EQUIVALENCE(h5o_flags(7) , H5O_COPY_ALL_F) + EQUIVALENCE(h5o_flags(8) , H5O_SHMESG_NONE_FLAG_F) + EQUIVALENCE(h5o_flags(9) , H5O_SHMESG_SDSPACE_FLAG_F) + EQUIVALENCE(h5o_flags(10) , H5O_SHMESG_DTYPE_FLAG_F) + EQUIVALENCE(h5o_flags(11) , H5O_SHMESG_FILL_FLAG_F) + EQUIVALENCE(h5o_flags(12) , H5O_SHMESG_PLINE_FLAG_F) + EQUIVALENCE(h5o_flags(13) , H5O_SHMESG_ATTR_FLAG_F) + EQUIVALENCE(h5o_flags(14) , H5O_SHMESG_ALL_FLAG_F) + EQUIVALENCE(h5o_flags(15) , H5O_HDR_CHUNK0_SIZE_F) + EQUIVALENCE(h5o_flags(16) , H5O_HDR_ATTR_CRT_ORDER_TRACK_F) + EQUIVALENCE(h5o_flags(17) , H5O_HDR_ATTR_CRT_ORDER_INDEX_F) + EQUIVALENCE(h5o_flags(18) , H5O_HDR_ATTR_STORE_PHASE_CHA_F) + EQUIVALENCE(h5o_flags(19) , H5O_HDR_STORE_TIMES_F) + EQUIVALENCE(h5o_flags(20) , H5O_HDR_ALL_FLAGS_F) + EQUIVALENCE(h5o_flags(21) , H5O_SHMESG_MAX_NINDEXES_F) + EQUIVALENCE(h5o_flags(22) , H5O_SHMESG_MAX_LIST_SIZE_F) + EQUIVALENCE(h5o_flags(23) , H5O_TYPE_UNKNOWN_F) + EQUIVALENCE(h5o_flags(24) , H5O_TYPE_GROUP_F) + EQUIVALENCE(h5o_flags(25) , H5O_TYPE_DATASET_F) + EQUIVALENCE(h5o_flags(26) , H5O_TYPE_NAMED_DATATYPE_F) + EQUIVALENCE(h5o_flags(27) , H5O_TYPE_NTYPES_F) + + ! + ! H5P flags declaration + ! + INTEGER, PARAMETER :: H5P_FLAGS_LEN = 18 + INTEGER(HID_T) H5P_flags(H5P_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5P_FLAGS/ + !DEC$endif + COMMON /H5P_FLAGS/ H5P_flags + + INTEGER(HID_T) :: H5P_FILE_CREATE_F + INTEGER(HID_T) :: H5P_FILE_ACCESS_F + INTEGER(HID_T) :: H5P_DATASET_CREATE_F + INTEGER(HID_T) :: H5P_DATASET_XFER_F + INTEGER(HID_T) :: H5P_FILE_MOUNT_F + INTEGER(HID_T) :: H5P_DEFAULT_F + INTEGER(HID_T) :: H5P_ROOT_F + INTEGER(HID_T) :: H5P_OBJECT_CREATE_F + INTEGER(HID_T) :: H5P_DATASET_ACCESS_F + INTEGER(HID_T) :: H5P_GROUP_CREATE_F + INTEGER(HID_T) :: H5P_GROUP_ACCESS_F + INTEGER(HID_T) :: H5P_DATATYPE_CREATE_F + INTEGER(HID_T) :: H5P_DATATYPE_ACCESS_F + INTEGER(HID_T) :: H5P_STRING_CREATE_F + INTEGER(HID_T) :: H5P_ATTRIBUTE_CREATE_F + INTEGER(HID_T) :: H5P_OBJECT_COPY_F + INTEGER(HID_T) :: H5P_LINK_CREATE_F + INTEGER(HID_T) :: H5P_LINK_ACCESS_F + + EQUIVALENCE(H5P_flags(1), H5P_FILE_CREATE_F) + EQUIVALENCE(H5P_flags(2), H5P_FILE_ACCESS_F) + EQUIVALENCE(H5P_flags(3), H5P_DATASET_CREATE_F) + EQUIVALENCE(H5P_flags(4), H5P_DATASET_XFER_F) + EQUIVALENCE(H5P_flags(5), H5P_FILE_MOUNT_F) + EQUIVALENCE(H5P_flags(6), H5P_DEFAULT_F) + EQUIVALENCE(H5P_flags(7), H5P_ROOT_F) + EQUIVALENCE(H5P_flags(8), H5P_OBJECT_CREATE_F) + EQUIVALENCE(H5P_flags(9), H5P_DATASET_ACCESS_F) + EQUIVALENCE(H5P_flags(10), H5P_GROUP_CREATE_F) + EQUIVALENCE(H5P_flags(11), H5P_GROUP_ACCESS_F) + EQUIVALENCE(H5P_flags(12), H5P_DATATYPE_CREATE_F) + EQUIVALENCE(H5P_flags(13), H5P_DATATYPE_ACCESS_F) + EQUIVALENCE(H5P_flags(14), H5P_STRING_CREATE_F) + EQUIVALENCE(H5P_flags(15), H5P_ATTRIBUTE_CREATE_F) + EQUIVALENCE(H5P_flags(16), H5P_OBJECT_COPY_F) + EQUIVALENCE(H5P_flags(17), H5P_LINK_CREATE_F) + EQUIVALENCE(H5P_flags(18), H5P_LINK_ACCESS_F) + + ! + ! H5P integers flags declaration + ! + INTEGER, PARAMETER :: H5P_FLAGS_INT_LEN = 2 + INTEGER :: H5P_flags_int(H5P_FLAGS_INT_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5P_FLAGS_INT/ + !DEC$endif + COMMON /H5P_FLAGS_INT/ H5P_flags_int + INTEGER :: H5P_CRT_ORDER_INDEXED_F + INTEGER :: H5P_CRT_ORDER_TRACKED_F + EQUIVALENCE(H5P_flags_int(1), H5P_CRT_ORDER_INDEXED_F) + EQUIVALENCE(H5P_flags_int(2), H5P_CRT_ORDER_TRACKED_F) + ! + ! H5R flags declaration + ! + INTEGER, PARAMETER :: H5R_FLAGS_LEN = 2 + INTEGER :: H5R_flags(H5R_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5R_FLAGS/ + !DEC$endif + COMMON /H5R_FLAGS/ H5R_flags + + INTEGER :: H5R_OBJECT_F + INTEGER :: H5R_DATASET_REGION_F + + EQUIVALENCE(H5R_flags(1), H5R_OBJECT_F) + EQUIVALENCE(H5R_flags(2), H5R_DATASET_REGION_F) + + ! + ! H5S flags declaration + ! + INTEGER, PARAMETER :: H5S_FLAGS_LEN = 19 + INTEGER :: H5S_flags(H5S_FLAGS_LEN) + INTEGER, PARAMETER :: H5S_HSIZE_FLAGS_LEN = 1 + INTEGER(HSIZE_T) H5S_hsize_flags(H5S_HSIZE_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5S_FLAGS/ + !DEC$ATTRIBUTES DLLEXPORT :: /H5S_HSIZE_FLAGS/ + !DEC$endif + COMMON /H5S_FLAGS/ H5S_flags + COMMON /H5S_HSIZE_FLAGS/ H5S_hsize_flags + + INTEGER(HSIZE_T) :: H5S_UNLIMITED_F + + INTEGER :: H5S_SCALAR_F + INTEGER :: H5S_SIMPLE_F + INTEGER :: H5S_NULL_F + + INTEGER :: H5S_ALL_F + + INTEGER :: H5S_SELECT_NOOP_F + INTEGER :: H5S_SELECT_SET_F + INTEGER :: H5S_SELECT_OR_F + INTEGER :: H5S_SELECT_AND_F + INTEGER :: H5S_SELECT_XOR_F + INTEGER :: H5S_SELECT_NOTB_F + INTEGER :: H5S_SELECT_NOTA_F + INTEGER :: H5S_SELECT_APPEND_F + INTEGER :: H5S_SELECT_PREPEND_F + INTEGER :: H5S_SELECT_INVALID_F + + INTEGER :: H5S_SEL_ERROR_F + INTEGER :: H5S_SEL_NONE_F + INTEGER :: H5S_SEL_POINTS_F + INTEGER :: H5S_SEL_HYPERSLABS_F + INTEGER :: H5S_SEL_ALL_F + + EQUIVALENCE(H5S_hsize_flags(1), H5S_UNLIMITED_F) + EQUIVALENCE(H5S_flags(1), H5S_SCALAR_F) + EQUIVALENCE(H5S_flags(2), H5S_SIMPLE_F) + EQUIVALENCE(H5S_flags(3), H5S_NULL_F) + EQUIVALENCE(H5S_flags(4), H5S_SELECT_SET_F) + EQUIVALENCE(H5S_flags(5), H5S_SELECT_OR_F) + EQUIVALENCE(H5S_flags(6), H5S_ALL_F) + + EQUIVALENCE(H5S_flags(7), H5S_SELECT_NOOP_F) + EQUIVALENCE(H5S_flags(8), H5S_SELECT_AND_F) + EQUIVALENCE(H5S_flags(9), H5S_SELECT_XOR_F) + EQUIVALENCE(H5S_flags(10), H5S_SELECT_NOTB_F) + EQUIVALENCE(H5S_flags(11), H5S_SELECT_NOTA_F) + EQUIVALENCE(H5S_flags(12), H5S_SELECT_APPEND_F) + EQUIVALENCE(H5S_flags(13), H5S_SELECT_PREPEND_F) + EQUIVALENCE(H5S_flags(14), H5S_SELECT_INVALID_F) + + + EQUIVALENCE(H5S_flags(15), H5S_SEL_ERROR_F) + EQUIVALENCE(H5S_flags(16), H5S_SEL_NONE_F) + EQUIVALENCE(H5S_flags(17), H5S_SEL_POINTS_F) + EQUIVALENCE(H5S_flags(18), H5S_SEL_HYPERSLABS_F) + EQUIVALENCE(H5S_flags(19), H5S_SEL_ALL_F) + + ! + ! H5T flags declaration + ! + INTEGER, PARAMETER :: H5T_FLAGS_LEN = 35 + INTEGER :: H5T_flags(H5T_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5T_FLAGS/ + !DEC$endif + COMMON /H5T_FLAGS/ H5T_flags + + INTEGER :: H5T_NO_CLASS_F + INTEGER :: H5T_INTEGER_F + INTEGER :: H5T_FLOAT_F + INTEGER :: H5T_TIME_F + INTEGER :: H5T_STRING_F + INTEGER :: H5T_BITFIELD_F + INTEGER :: H5T_OPAQUE_F + INTEGER :: H5T_COMPOUND_F + INTEGER :: H5T_REFERENCE_F + INTEGER :: H5T_ENUM_F + INTEGER :: H5T_VLEN_F + INTEGER :: H5T_ARRAY_F + INTEGER :: H5T_ORDER_LE_F + INTEGER :: H5T_ORDER_BE_F + INTEGER :: H5T_ORDER_VAX_F + INTEGER :: H5T_ORDER_NONE_F + INTEGER :: H5T_ORDER_MIXED_F + INTEGER :: H5T_PAD_ZERO_F + INTEGER :: H5T_PAD_ONE_F + INTEGER :: H5T_PAD_BACKGROUND_F + INTEGER :: H5T_PAD_ERROR_F + INTEGER :: H5T_SGN_NONE_F + INTEGER :: H5T_SGN_2_F + INTEGER :: H5T_SGN_ERROR_F + INTEGER :: H5T_NORM_IMPLIED_F + INTEGER :: H5T_NORM_MSBSET_F + INTEGER :: H5T_NORM_NONE_F + INTEGER :: H5T_CSET_ASCII_F + INTEGER :: H5T_CSET_UTF8_F + INTEGER :: H5T_STR_NULLTERM_F + INTEGER :: H5T_STR_NULLPAD_F + INTEGER :: H5T_STR_SPACEPAD_F + INTEGER :: H5T_STR_ERROR_F + INTEGER :: H5T_DIR_ASCEND_F + INTEGER :: H5T_DIR_DESCEND_F + + EQUIVALENCE(H5T_flags(1), H5T_NO_CLASS_F) + EQUIVALENCE(H5T_flags(2), H5T_INTEGER_F) + EQUIVALENCE(H5T_flags(3), H5T_FLOAT_F) + EQUIVALENCE(H5T_flags(4), H5T_TIME_F) + EQUIVALENCE(H5T_flags(5), H5T_STRING_F) + EQUIVALENCE(H5T_flags(6), H5T_BITFIELD_F) + EQUIVALENCE(H5T_flags(7), H5T_OPAQUE_F) + EQUIVALENCE(H5T_flags(8), H5T_COMPOUND_F) + EQUIVALENCE(H5T_flags(9), H5T_REFERENCE_F) + EQUIVALENCE(H5T_flags(10), H5T_ENUM_F) + EQUIVALENCE(H5T_flags(11), H5T_ORDER_LE_F) + EQUIVALENCE(H5T_flags(12), H5T_ORDER_BE_F) + EQUIVALENCE(H5T_flags(13), H5T_ORDER_MIXED_F) + EQUIVALENCE(H5T_flags(14), H5T_ORDER_VAX_F) + EQUIVALENCE(H5T_flags(15), H5T_ORDER_NONE_F) + EQUIVALENCE(H5T_flags(16), H5T_PAD_ZERO_F) + EQUIVALENCE(H5T_flags(17), H5T_PAD_ONE_F) + EQUIVALENCE(H5T_flags(18), H5T_PAD_BACKGROUND_F) + EQUIVALENCE(H5T_flags(19), H5T_PAD_ERROR_F) + EQUIVALENCE(H5T_flags(20), H5T_SGN_NONE_F) + EQUIVALENCE(H5T_flags(21), H5T_SGN_2_F) + EQUIVALENCE(H5T_flags(22), H5T_SGN_ERROR_F) + EQUIVALENCE(H5T_flags(23), H5T_NORM_IMPLIED_F) + EQUIVALENCE(H5T_flags(24), H5T_NORM_MSBSET_F) + EQUIVALENCE(H5T_flags(25), H5T_NORM_NONE_F) + EQUIVALENCE(H5T_flags(26), H5T_CSET_ASCII_F) + EQUIVALENCE(H5T_flags(27), H5T_CSET_UTF8_F) + EQUIVALENCE(H5T_flags(28), H5T_STR_NULLTERM_F) + EQUIVALENCE(H5T_flags(29), H5T_STR_NULLPAD_F) + EQUIVALENCE(H5T_flags(30), H5T_STR_SPACEPAD_F) + EQUIVALENCE(H5T_flags(31), H5T_STR_ERROR_F) + EQUIVALENCE(H5T_flags(32), H5T_VLEN_F) + EQUIVALENCE(H5T_flags(33), H5T_ARRAY_F) + EQUIVALENCE(H5T_flags(34), H5T_DIR_ASCEND_F) + EQUIVALENCE(H5T_flags(35), H5T_DIR_DESCEND_F) + ! + ! H5Z flags declaration + ! + INTEGER, PARAMETER :: H5Z_FLAGS_LEN = 20 + INTEGER :: H5Z_flags(H5Z_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5Z_FLAGS/ + !DEC$endif + COMMON /H5Z_FLAGS/ H5Z_flags + + INTEGER :: H5Z_FILTER_ERROR_F + INTEGER :: H5Z_FILTER_NONE_F + INTEGER :: H5Z_FILTER_ALL_F + INTEGER :: H5Z_FILTER_DEFLATE_F + INTEGER :: H5Z_FILTER_SHUFFLE_F + INTEGER :: H5Z_FILTER_FLETCHER32_F + INTEGER :: H5Z_FILTER_SZIP_F + INTEGER :: H5Z_ERROR_EDC_F + INTEGER :: H5Z_DISABLE_EDC_F + INTEGER :: H5Z_ENABLE_EDC_F + INTEGER :: H5Z_NO_EDC_F + INTEGER :: H5Z_FLAG_OPTIONAL_F + INTEGER :: H5Z_FILTER_ENCODE_ENABLED_F + INTEGER :: H5Z_FILTER_DECODE_ENABLED_F + INTEGER :: H5Z_FILTER_NBIT_F + INTEGER :: H5Z_FILTER_SCALEOFFSET_F + INTEGER :: H5Z_SO_FLOAT_DSCALE_F + INTEGER :: H5Z_SO_FLOAT_ESCALE_F + INTEGER :: H5Z_SO_INT_F + INTEGER :: H5Z_SO_INT_MINBITS_DEFAULT_F + + EQUIVALENCE(H5Z_flags(1), H5Z_FILTER_ERROR_F) + EQUIVALENCE(H5Z_flags(2), H5Z_FILTER_NONE_F) + EQUIVALENCE(H5Z_flags(3), H5Z_FILTER_DEFLATE_F) + EQUIVALENCE(H5Z_flags(4), H5Z_FILTER_SHUFFLE_F) + EQUIVALENCE(H5Z_flags(5), H5Z_FILTER_FLETCHER32_F) + EQUIVALENCE(H5Z_flags(6), H5Z_ERROR_EDC_F) + EQUIVALENCE(H5Z_flags(7), H5Z_DISABLE_EDC_F) + EQUIVALENCE(H5Z_flags(8), H5Z_ENABLE_EDC_F) + EQUIVALENCE(H5Z_flags(9), H5Z_NO_EDC_F) + EQUIVALENCE(H5Z_flags(10), H5Z_FILTER_SZIP_F) + EQUIVALENCE(H5Z_flags(11), H5Z_FLAG_OPTIONAL_F) + EQUIVALENCE(H5Z_flags(12), H5Z_FILTER_ENCODE_ENABLED_F) + EQUIVALENCE(H5Z_flags(13), H5Z_FILTER_DECODE_ENABLED_F) + EQUIVALENCE(H5Z_flags(14), H5Z_FILTER_ALL_F) + EQUIVALENCE(H5Z_flags(15), H5Z_FILTER_NBIT_F) + EQUIVALENCE(H5Z_flags(16), H5Z_FILTER_SCALEOFFSET_F) + EQUIVALENCE(H5Z_flags(17), H5Z_SO_FLOAT_DSCALE_F) + EQUIVALENCE(H5Z_flags(18), H5Z_SO_FLOAT_ESCALE_F) + EQUIVALENCE(H5Z_flags(19), H5Z_SO_INT_F) + EQUIVALENCE(H5Z_flags(20), H5Z_SO_INT_MINBITS_DEFAULT_F) + + ! + ! H5 Library flags declaration + ! + INTEGER, PARAMETER :: H5LIB_FLAGS_LEN = 2 + INTEGER :: H5LIB_flags(H5LIB_FLAGS_LEN) + !DEC$if defined(BUILD_HDF5_DLL) + !DEC$ATTRIBUTES DLLEXPORT :: /H5LIB_FLAGS/ + !DEC$endif + COMMON /H5LIB_FLAGS/ H5LIB_flags + INTEGER :: H5_SZIP_EC_OM_F + INTEGER :: H5_SZIP_NN_OM_F + ! + EQUIVALENCE(H5LIB_flags(1), H5_SZIP_EC_OM_F) + EQUIVALENCE(H5LIB_flags(2), H5_SZIP_NN_OM_F) + + + ! General H5 flags declarations + ! +!!$ INTEGER, PARAMETER :: H5_FLAGS_LEN = 2 +!!$ INTEGER H5_flags(H5_FLAGS_LEN) +!!$!DEC$if defined(BUILD_HDF5_DLL) +!!$!DEC$ATTRIBUTES DLLEXPORT :: /H5_FLAGS/ +!!$!DEC$endif +!!$ COMMON /H5_FLAGS/ H5_flags +!!$ +!!$ INTEGER :: _F +!!$ INTEGER :: H5F_SCOPE_LOCAL_F +!!$ +!!$ EQUIVALENCE(H5F_flags(1), H5F_SCOPE_GLOBAL_F) +!!$ EQUIVALENCE(H5F_flags(2), H5F_SCOPE_LOCAL_F) + +CONTAINS + + ! Copy a c string to a Fortran string + + SUBROUTINE H5_Fortran_string_c2f(c_string, f_string) + + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + CHARACTER(KIND=C_CHAR, LEN=*), INTENT(IN) :: c_string + CHARACTER(LEN=*), INTENT(OUT) :: f_string + INTEGER(SIZE_T) :: c_len, f_len + + ! Find the length of the C string by located the null terminator + c_len = MAX(INDEX(c_string,C_NULL_CHAR, KIND=SIZE_T)-1,1) + ! Find the length of the Fortran string + f_len = LEN(f_string) + + ! CASE (1): C string is equal to or larger then Fortran character buffer, + ! so fill the entire Fortran buffer. + IF(c_len.GE.f_len)THEN ! + f_string(1:f_len) = c_string(1:f_len) + + ! CASE (2): C string is smaller then Fortran character buffer, + ! so copy C string and blank pad remaining characters. + ELSE + f_string(1:c_len) = c_string(1:c_len) + f_string(c_len+1:f_len) =' ' + ENDIF + END SUBROUTINE H5_Fortran_string_c2f + + SUBROUTINE H5_Fortran_string_f2c(f_string, c_string) + + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: f_string + CHARACTER(KIND=C_CHAR, LEN=*), INTENT(OUT) :: c_string + INTEGER(SIZE_T) :: c_len, f_len + + c_string = TRIM(f_string)//C_NULL_CHAR + + END SUBROUTINE H5_Fortran_string_f2c + + +! Copy Fortran string to C charater array, assuming the C array is one-char +! longer for the terminating null char. +! fstring : the Fortran input string +! cstring : the C output string (with memory already allocated) +!!$subroutine MPIR_Fortran_string_f2c(fstring, cstring) +!!$ implicit none +!!$ character(len=*), intent(in) :: fstring +!!$ character(kind=c_char), intent(out) :: cstring(:) +!!$ integer :: i, j +!!$ logical :: met_non_blank +!!$ +!!$ ! Trim the leading and trailing blank characters +!!$ j = 1 +!!$ met_non_blank = .false. +!!$ do i = 1, len_trim(fstring) +!!$ if (met_non_blank) then +!!$ cstring(j) = fstring(i:i) +!!$ j = j + 1 +!!$ else if (fstring(i:i) /= ' ') then +!!$ met_non_blank = .true. +!!$ cstring(j) = fstring(i:i) +!!$ j = j + 1 +!!$ end if +!!$ end do +!!$ +!!$ cstring(j) = C_NULL_CHAR +!!$end subroutine MPIR_Fortran_string_f2c +!!$ +!!$! Copy C charater array to Fortran string +!!$subroutine MPIR_Fortran_string_c2f(cstring, fstring) +!!$ implicit none +!!$ character(kind=c_char), intent(in) :: cstring(:) +!!$ character(len=*), intent(out) :: fstring +!!$ integer :: i, j, length +!!$ +!!$ i = 1 +!!$ do while (cstring(i) /= C_NULL_CHAR) +!!$ fstring(i:i) = cstring(i) +!!$ i = i + 1 +!!$ end do +!!$ +!!$ ! Zero out the trailing characters +!!$ length = len(fstring) +!!$ do j = i, length +!!$ fstring(j:j) = ' ' +!!$ end do +!!$end subroutine MPIR_Fortran_string_c2f + +END MODULE H5GLOBAL + diff --git a/fortran/src/H5f90global.f90 b/fortran/src/H5f90global.f90 deleted file mode 100644 index 0e371f5..0000000 --- a/fortran/src/H5f90global.f90 +++ /dev/null @@ -1,947 +0,0 @@ -!****h* ROBODoc/H5GLOBAL -! -! NAME -! MODULE H5GLOBAL -! -! FILE -! src/fortran/H5f90global.f90 -! -! PURPOSE -! This module is used to pass C stubs for H5 Fortran APIs. The C stubs are -! packed into arrays in H5_f.c and these arrays are then passed to Fortran. -! This module then uses EQUIVALENCE to assign elements of the arrays to -! Fortran equivalent C stubs. -! -! NOTES -! The size of the C arrays in H5_f.c has to match the values of the variables -! declared as PARAMETER, hence if the size of an array in H5_f.c is changed -! then the PARAMETER of that corresponding array in Fortran must also be changed. -! -! USES -! H5FORTRAN_TYPES - This module is generated at run time. See -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! Elena Pourmal -! -!***** - -MODULE H5GLOBAL - USE H5FORTRAN_TYPES - - IMPLICIT NONE - - ! Definitions for reference datatypes. - ! If you change the value of these parameters, do not forget to change corresponding - ! values in the H5f90.h file. - INTEGER, PARAMETER :: REF_REG_BUF_LEN = 3 - - ! Parameters used in the function 'h5kind_to_type' located in H5_ff.f90. - ! The flag is used to tell the function whether the kind input variable - ! is for a REAL or INTEGER data type. - - INTEGER, PARAMETER :: H5_REAL_KIND = 1 - INTEGER, PARAMETER :: H5_INTEGER_KIND = 0 - - TYPE :: hobj_ref_t_f - INTEGER(HADDR_T) ref - END TYPE hobj_ref_t_f - - TYPE :: hdset_reg_ref_t_f - INTEGER, DIMENSION(1:REF_REG_BUF_LEN) :: ref - END TYPE hdset_reg_ref_t_f - - INTEGER, PARAMETER :: PREDEF_TYPES_LEN = 17 ! Do not forget to change this - ! value when new predefined - ! datatypes are added - - ! Do not forget to change the following line when new predefined - ! floating data types are added - INTEGER, PARAMETER :: FLOATING_TYPES_LEN = 4 - - ! Do not forget to change the following line when new predefined - ! integer data types are added - INTEGER, PARAMETER :: INTEGER_TYPES_LEN = 27 - - INTEGER(HID_T) :: H5T_NATIVE_INTEGER_1, & - H5T_NATIVE_INTEGER_2, & - H5T_NATIVE_INTEGER_4, & - H5T_NATIVE_INTEGER_8, & - H5T_NATIVE_REAL_4, & - H5T_NATIVE_REAL_8, & - H5T_NATIVE_REAL_16, & - H5T_NATIVE_INTEGER, & - H5T_NATIVE_REAL, & - H5T_NATIVE_DOUBLE, & - H5T_NATIVE_CHARACTER , & - H5T_STD_REF_OBJ, & - H5T_STD_REF_DSETREG, & - H5T_IEEE_F32BE, & - H5T_IEEE_F32LE, & - H5T_IEEE_F64BE, & - H5T_IEEE_F64LE, & - H5T_STD_I8BE, & - H5T_STD_I8LE, & - H5T_STD_I16BE, & - H5T_STD_I16LE, & - H5T_STD_I32BE, & - H5T_STD_I32LE, & - H5T_STD_I64BE, & - H5T_STD_I64LE, & - H5T_STD_U8BE, & - H5T_STD_U8LE, & - H5T_STD_U16BE, & - H5T_STD_U16LE, & - H5T_STD_U32BE - -! NOTE: Splitting the line since the Fortran 95 standard limits the number of -! continuation lines to 39; the F03/F08 standard limits the number -! to 255 lines. - - INTEGER(HID_T) :: H5T_STD_U32LE, & - H5T_STD_U64BE, & - H5T_STD_U64LE, & - H5T_STRING, & - H5T_STD_B8BE, & - H5T_STD_B8LE, & - H5T_STD_B16BE, & - H5T_STD_B16LE, & - H5T_STD_B32BE, & - H5T_STD_B32LE, & - H5T_STD_B64BE, & - H5T_STD_B64LE, & - H5T_NATIVE_B8, & - H5T_NATIVE_B16, & - H5T_NATIVE_B32, & - H5T_NATIVE_B64, & - H5T_FORTRAN_S1, & - H5T_C_S1 - - - INTEGER(HID_T), DIMENSION(PREDEF_TYPES_LEN) :: predef_types - EQUIVALENCE (predef_types(1), H5T_NATIVE_INTEGER) - EQUIVALENCE (predef_types(2), H5T_NATIVE_REAL) - EQUIVALENCE (predef_types(3), H5T_NATIVE_DOUBLE) - EQUIVALENCE (predef_types(4), H5T_NATIVE_CHARACTER) - EQUIVALENCE (predef_types(5), H5T_STD_REF_OBJ) - EQUIVALENCE (predef_types(6), H5T_STD_REF_DSETREG) - EQUIVALENCE (predef_types(7), H5T_NATIVE_INTEGER_1) - EQUIVALENCE (predef_types(8), H5T_NATIVE_INTEGER_2) - EQUIVALENCE (predef_types(9), H5T_NATIVE_INTEGER_4) - EQUIVALENCE (predef_types(10), H5T_NATIVE_INTEGER_8) - EQUIVALENCE (predef_types(11), H5T_NATIVE_REAL_4) - EQUIVALENCE (predef_types(12), H5T_NATIVE_REAL_8) - EQUIVALENCE (predef_types(13), H5T_NATIVE_REAL_16) - EQUIVALENCE (predef_types(14), H5T_NATIVE_B8 ) - EQUIVALENCE (predef_types(15), H5T_NATIVE_B16) - EQUIVALENCE (predef_types(16), H5T_NATIVE_B32) - EQUIVALENCE (predef_types(17), H5T_NATIVE_B64) - - INTEGER(HID_T), DIMENSION(FLOATING_TYPES_LEN) :: floating_types - EQUIVALENCE (floating_types(1), H5T_IEEE_F32BE ) - EQUIVALENCE (floating_types(2), H5T_IEEE_F32LE) - EQUIVALENCE (floating_types(3), H5T_IEEE_F64BE) - EQUIVALENCE (floating_types(4), H5T_IEEE_F64LE) - - INTEGER(HID_T), DIMENSION(INTEGER_TYPES_LEN) :: integer_types - EQUIVALENCE (integer_types(1), H5T_STD_I8BE ) - EQUIVALENCE (integer_types(2), H5T_STD_I8LE) - EQUIVALENCE (integer_types(3), H5T_STD_I16BE) - EQUIVALENCE (integer_types(4), H5T_STD_I16LE) - EQUIVALENCE (integer_types(5), H5T_STD_I32BE) - EQUIVALENCE (integer_types(6), H5T_STD_I32LE) - EQUIVALENCE (integer_types(7), H5T_STD_I64BE) - EQUIVALENCE (integer_types(8), H5T_STD_I64LE) - EQUIVALENCE (integer_types(9), H5T_STD_U8BE) - EQUIVALENCE (integer_types(10), H5T_STD_U8LE) - EQUIVALENCE (integer_types(11), H5T_STD_U16BE) - EQUIVALENCE (integer_types(12), H5T_STD_U16LE) - EQUIVALENCE (integer_types(13), H5T_STD_U32BE) - EQUIVALENCE (integer_types(14), H5T_STD_U32LE) - EQUIVALENCE (integer_types(15), H5T_STD_U64BE) - EQUIVALENCE (integer_types(16), H5T_STD_U64LE) - EQUIVALENCE (integer_types(17), H5T_STRING) - EQUIVALENCE (integer_types(18), H5T_STD_B8BE) - EQUIVALENCE (integer_types(19), H5T_STD_B8LE) - EQUIVALENCE (integer_types(20), H5T_STD_B16BE) - EQUIVALENCE (integer_types(21), H5T_STD_B16LE) - EQUIVALENCE (integer_types(22), H5T_STD_B32BE) - EQUIVALENCE (integer_types(23), H5T_STD_B32LE) - EQUIVALENCE (integer_types(24), H5T_STD_B64BE) - EQUIVALENCE (integer_types(25), H5T_STD_B64LE) - EQUIVALENCE (integer_types(26), H5T_FORTRAN_S1) - EQUIVALENCE (integer_types(27), H5T_C_S1) - - - ! COMMON /PREDEFINED_TYPES/ H5T_NATIVE_INTEGER, & - ! H5T_NATIVE_REAL, & - ! H5T_NATIVE_DOUBLE, & - ! H5T_NATIVE_CHARACTER, & - ! H5T_STD_REF_OBJ, & - ! H5T_STD_REF_DSETREG - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /PREDEFINED_TYPES/ - !DEC$endif - COMMON /PREDEFINED_TYPES/ predef_types - - ! COMMON /FLOATING_TYPES/ H5T_IEEE_F32BE, & - ! H5T_IEEE_F32LE, & - ! H5T_IEEE_F64BE, & - ! H5T_IEEE_F64LE - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /FLOATING_TYPES/ - !DEC$endif - COMMON /FLOATING_TYPES/ floating_types - ! - ! COMMON /INTEGER_TYPES/ H5T_STD_I8BE, & - ! H5T_STD_I8LE, & - ! H5T_STD_I16BE, & - ! H5T_STD_I16LE, & - ! H5T_STD_I32BE, & - ! H5T_STD_I32LE, & - ! H5T_STD_I64BE, & - ! H5T_STD_I64LE, & - ! H5T_STD_U8BE, & - ! H5T_STD_U8LE, & - ! H5T_STD_U16BE, & - ! H5T_STD_U16LE, & - ! H5T_STD_U32BE, & - ! H5T_STD_U32LE, & - ! H5T_STD_U64BE, & - ! H5T_STD_U64LE - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /INTEGER_TYPES/ - !DEC$endif - COMMON /INTEGER_TYPES/ integer_types - ! - ! Fortran flags - ! - ! - ! H5F flags (DO NOT FORGET TO UPDATE WHEN NEW FLAGS ARE ADDED !) - ! - ! NOTE: H5F_ACC_DEBUG is deprecated (nonfunctional) but retained for - ! backward compatibility since it's in the public API. - ! - ! H5F flags declaration - ! - INTEGER, PARAMETER :: H5F_FLAGS_LEN = 19 - INTEGER :: H5F_flags(H5F_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5F_FLAGS/ - !DEC$endif - COMMON /H5F_FLAGS/ H5F_flags - - INTEGER :: H5F_ACC_RDWR_F - INTEGER :: H5F_ACC_RDONLY_F - INTEGER :: H5F_ACC_TRUNC_F - INTEGER :: H5F_ACC_EXCL_F - INTEGER :: H5F_ACC_DEBUG_F - INTEGER :: H5F_SCOPE_LOCAL_F - INTEGER :: H5F_SCOPE_GLOBAL_F - INTEGER :: H5F_CLOSE_DEFAULT_F - INTEGER :: H5F_CLOSE_WEAK_F - INTEGER :: H5F_CLOSE_SEMI_F - INTEGER :: H5F_CLOSE_STRONG_F - INTEGER :: H5F_OBJ_FILE_F - INTEGER :: H5F_OBJ_DATASET_F - INTEGER :: H5F_OBJ_GROUP_F - INTEGER :: H5F_OBJ_DATATYPE_F - INTEGER :: H5F_OBJ_ALL_F - INTEGER :: H5F_LIBVER_EARLIEST_F - INTEGER :: H5F_LIBVER_LATEST_F - INTEGER :: H5F_UNLIMITED_F - - EQUIVALENCE(H5F_flags(1), H5F_ACC_RDWR_F) - EQUIVALENCE(H5F_flags(2), H5F_ACC_RDONLY_F) - EQUIVALENCE(H5F_flags(3), H5F_ACC_TRUNC_F) - EQUIVALENCE(H5F_flags(4), H5F_ACC_EXCL_F) - EQUIVALENCE(H5F_flags(5), H5F_ACC_DEBUG_F) - EQUIVALENCE(H5F_flags(6), H5F_SCOPE_LOCAL_F) - EQUIVALENCE(H5F_flags(7), H5F_SCOPE_GLOBAL_F) - EQUIVALENCE(H5F_flags(8), H5F_CLOSE_DEFAULT_F) - EQUIVALENCE(H5F_flags(9), H5F_CLOSE_WEAK_F) - EQUIVALENCE(H5F_flags(10), H5F_CLOSE_SEMI_F) - EQUIVALENCE(H5F_flags(11), H5F_CLOSE_STRONG_F) - EQUIVALENCE(H5F_flags(12), H5F_OBJ_FILE_F) - EQUIVALENCE(H5F_flags(13), H5F_OBJ_DATASET_F) - EQUIVALENCE(H5F_flags(14), H5F_OBJ_GROUP_F) - EQUIVALENCE(H5F_flags(15), H5F_OBJ_DATATYPE_F) - EQUIVALENCE(H5F_flags(16), H5F_OBJ_ALL_F) - EQUIVALENCE(H5F_flags(17), H5F_LIBVER_EARLIEST_F) - EQUIVALENCE(H5F_flags(18), H5F_LIBVER_LATEST_F) - EQUIVALENCE(H5F_flags(19), H5F_UNLIMITED_F) - ! - ! H5generic flags declaration - ! - INTEGER, PARAMETER :: H5generic_FLAGS_LEN = 9 - INTEGER :: H5generic_flags(H5generic_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5generic_FLAGS/ - !DEC$endif - COMMON /H5generic_FLAGS/ H5generic_flags - - INTEGER :: H5_INDEX_UNKNOWN_F - INTEGER :: H5_INDEX_NAME_F - INTEGER :: H5_INDEX_CRT_ORDER_F - INTEGER :: H5_INDEX_N_F - INTEGER :: H5_ITER_UNKNOWN_F - INTEGER :: H5_ITER_INC_F - INTEGER :: H5_ITER_DEC_F - INTEGER :: H5_ITER_NATIVE_F - INTEGER :: H5_ITER_N_F - - EQUIVALENCE(H5generic_flags(1), H5_INDEX_UNKNOWN_F) - EQUIVALENCE(H5generic_flags(2), H5_INDEX_NAME_F) - EQUIVALENCE(H5generic_flags(3), H5_INDEX_CRT_ORDER_F) - EQUIVALENCE(H5generic_flags(4), H5_INDEX_N_F) - EQUIVALENCE(H5generic_flags(5), H5_ITER_UNKNOWN_F) - EQUIVALENCE(H5generic_flags(6), H5_ITER_INC_F) - EQUIVALENCE(H5generic_flags(7), H5_ITER_DEC_F) - EQUIVALENCE(H5generic_flags(8), H5_ITER_NATIVE_F) - EQUIVALENCE(H5generic_flags(9), H5_ITER_N_F) - ! - ! H5G flags declaration - ! - INTEGER, PARAMETER :: H5G_FLAGS_LEN = 12 - INTEGER :: H5G_flags(H5G_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5G_FLAGS/ - !DEC$endif - COMMON /H5G_FLAGS/ H5G_flags - - INTEGER :: H5G_UNKNOWN_F - INTEGER :: H5G_GROUP_F - INTEGER :: H5G_DATASET_F - INTEGER :: H5G_TYPE_F - INTEGER :: H5G_LINK_F - INTEGER :: H5G_UDLINK_F - INTEGER :: H5G_SAME_LOC_F - INTEGER :: H5G_LINK_ERROR_F - INTEGER :: H5G_LINK_HARD_F - INTEGER :: H5G_LINK_SOFT_F - INTEGER :: H5G_STORAGE_TYPE_UNKNOWN_F - INTEGER :: H5G_STORAGE_TYPE_SYMBOL_TABLE_F - INTEGER :: H5G_STORAGE_TYPE_COMPACT_F - INTEGER :: H5G_STORAGE_TYPE_DENSE_F - - EQUIVALENCE(H5G_flags(1), H5G_UNKNOWN_F) ! Unknown object type - EQUIVALENCE(H5G_flags(2), H5G_GROUP_F) ! Object is a group - EQUIVALENCE(H5G_flags(3), H5G_DATASET_F) ! Object is a dataset - EQUIVALENCE(H5G_flags(4), H5G_TYPE_F) ! Object is a named data type - EQUIVALENCE(H5G_flags(5), H5G_SAME_LOC_F) - EQUIVALENCE(H5G_flags(6), H5G_LINK_ERROR_F) - EQUIVALENCE(H5G_flags(7), H5G_LINK_HARD_F) - EQUIVALENCE(H5G_flags(8), H5G_LINK_SOFT_F) - - EQUIVALENCE(H5G_flags(9), H5G_STORAGE_TYPE_UNKNOWN_F ) - EQUIVALENCE(H5G_flags(10), H5G_STORAGE_TYPE_SYMBOL_TABLE_F) - EQUIVALENCE(H5G_flags(11), H5G_STORAGE_TYPE_COMPACT_F) - EQUIVALENCE(H5G_flags(12), H5G_STORAGE_TYPE_DENSE_F) - ! - ! H5D flags declaration - ! - - INTEGER, PARAMETER :: H5D_FLAGS_LEN = 25 - INTEGER :: H5D_flags(H5D_FLAGS_LEN) - INTEGER, PARAMETER :: H5D_SIZE_FLAGS_LEN = 2 - INTEGER(SIZE_T) :: H5D_size_flags(H5D_SIZE_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5D_FLAGS/ - !DEC$ATTRIBUTES DLLEXPORT :: /H5D_SIZE_FLAGS/ - !DEC$endif - COMMON /H5D_FLAGS/ H5D_flags - COMMON /H5D_SIZE_FLAGS/ H5D_size_flags - - INTEGER :: H5D_COMPACT_F - INTEGER :: H5D_CONTIGUOUS_F - INTEGER :: H5D_CHUNKED_F - - INTEGER :: H5D_ALLOC_TIME_ERROR_F - INTEGER :: H5D_ALLOC_TIME_DEFAULT_F - INTEGER :: H5D_ALLOC_TIME_EARLY_F - INTEGER :: H5D_ALLOC_TIME_LATE_F - INTEGER :: H5D_ALLOC_TIME_INCR_F - - INTEGER :: H5D_SPACE_STS_ERROR_F - INTEGER :: H5D_SPACE_STS_NOT_ALLOCATED_F - INTEGER :: H5D_SPACE_STS_PART_ALLOCATED_F - INTEGER :: H5D_SPACE_STS_ALLOCATED_F - - INTEGER :: H5D_FILL_TIME_ERROR_F - INTEGER :: H5D_FILL_TIME_ALLOC_F - INTEGER :: H5D_FILL_TIME_NEVER_F - - INTEGER :: H5D_FILL_VALUE_ERROR_F - INTEGER :: H5D_FILL_VALUE_UNDEFINED_F - INTEGER :: H5D_FILL_VALUE_DEFAULT_F - INTEGER :: H5D_FILL_VALUE_USER_DEFINED_F - -! shortened "_DEFAULT" to "_DFLT" to satisfy the limit of 31 -! characters for variable names in Fortran. -! shortened "_CONTIGUOUS" to "_CONTIG" to satisfy the limit of 31 -! characters for variable names in Fortran. - - INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NSLOTS_DFLT_F - INTEGER(SIZE_T) :: H5D_CHUNK_CACHE_NBYTES_DFLT_F - INTEGER :: H5D_CHUNK_CACHE_W0_DFLT_F - INTEGER :: H5D_MPIO_NO_COLLECTIVE_F - INTEGER :: H5D_MPIO_CHUNK_INDEPENDENT_F - INTEGER :: H5D_MPIO_CHUNK_COLLECTIVE_F - INTEGER :: H5D_MPIO_CHUNK_MIXED_F - INTEGER :: H5D_MPIO_CONTIG_COLLECTIVE_F - - EQUIVALENCE(H5D_flags(1), H5D_COMPACT_F) - EQUIVALENCE(H5D_flags(2), H5D_CONTIGUOUS_F) - EQUIVALENCE(H5D_flags(3), H5D_CHUNKED_F) - - EQUIVALENCE(H5D_flags(4), H5D_ALLOC_TIME_ERROR_F) - EQUIVALENCE(H5D_flags(5), H5D_ALLOC_TIME_DEFAULT_F) - EQUIVALENCE(H5D_flags(6), H5D_ALLOC_TIME_EARLY_F) - EQUIVALENCE(H5D_flags(7), H5D_ALLOC_TIME_LATE_F) - EQUIVALENCE(H5D_flags(8), H5D_ALLOC_TIME_INCR_F) - - EQUIVALENCE(H5D_flags(9), H5D_SPACE_STS_ERROR_F) - EQUIVALENCE(H5D_flags(10), H5D_SPACE_STS_NOT_ALLOCATED_F) - EQUIVALENCE(H5D_flags(11), H5D_SPACE_STS_PART_ALLOCATED_F) - EQUIVALENCE(H5D_flags(12), H5D_SPACE_STS_ALLOCATED_F) - - EQUIVALENCE(H5D_flags(13), H5D_FILL_TIME_ERROR_F) - EQUIVALENCE(H5D_flags(14), H5D_FILL_TIME_ALLOC_F) - EQUIVALENCE(H5D_flags(15), H5D_FILL_TIME_NEVER_F) - - EQUIVALENCE(H5D_flags(16), H5D_FILL_VALUE_ERROR_F) - EQUIVALENCE(H5D_flags(17), H5D_FILL_VALUE_UNDEFINED_F) - EQUIVALENCE(H5D_flags(18), H5D_FILL_VALUE_DEFAULT_F) - EQUIVALENCE(H5D_flags(19), H5D_FILL_VALUE_USER_DEFINED_F) - - EQUIVALENCE(H5D_flags(20), H5D_CHUNK_CACHE_W0_DFLT_F) - EQUIVALENCE(H5D_flags(21), H5D_MPIO_NO_COLLECTIVE_F) - EQUIVALENCE(H5D_flags(22), H5D_MPIO_CHUNK_INDEPENDENT_F) - EQUIVALENCE(H5D_flags(23), H5D_MPIO_CHUNK_COLLECTIVE_F) - EQUIVALENCE(H5D_flags(24), H5D_MPIO_CHUNK_MIXED_F) - EQUIVALENCE(H5D_flags(25), H5D_MPIO_CONTIG_COLLECTIVE_F) - - EQUIVALENCE(H5D_size_flags(1), H5D_CHUNK_CACHE_NSLOTS_DFLT_F) - EQUIVALENCE(H5D_size_flags(2), H5D_CHUNK_CACHE_NBYTES_DFLT_F) - - ! - ! H5E flags declaration - ! - INTEGER, PARAMETER :: H5E_FLAGS_LEN = 4 - INTEGER :: H5E_flags(H5E_FLAGS_LEN) - INTEGER, PARAMETER :: H5E_HID_FLAGS_LEN = 1 - INTEGER(HID_T) :: H5E_hid_flags(H5E_HID_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5E_FLAGS/ - !DEC$ATTRIBUTES DLLEXPORT :: /H5E_HID_FLAGS/ - !DEC$endif - COMMON /H5E_FLAGS/ H5E_flags - COMMON /H5E_HID_FLAGS/ H5E_hid_flags - - INTEGER(HID_T) :: H5E_DEFAULT_F - INTEGER :: H5E_MAJOR_F - INTEGER :: H5E_MINOR_F - INTEGER :: H5E_WALK_UPWARD_F - INTEGER :: H5E_WALK_DOWNWARD_F - - EQUIVALENCE(H5E_hid_flags(1), H5E_DEFAULT_F) - EQUIVALENCE(H5E_flags(1) , H5E_MAJOR_F) - EQUIVALENCE(H5E_flags(2) , H5E_MINOR_F) - EQUIVALENCE(H5E_flags(3) , H5E_WALK_UPWARD_F) - EQUIVALENCE(H5E_flags(4) , H5E_WALK_DOWNWARD_F) - - ! - ! H5FD flags declaration - ! - INTEGER, PARAMETER :: H5FD_FLAGS_LEN = 11 - INTEGER :: H5FD_flags(H5FD_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5FD_FLAGS/ - !DEC$endif - COMMON /H5FD_FLAGS/ H5FD_flags - - INTEGER :: H5FD_MPIO_INDEPENDENT_F - INTEGER :: H5FD_MPIO_COLLECTIVE_F - INTEGER :: H5FD_MEM_NOLIST_F - INTEGER :: H5FD_MEM_DEFAULT_F - INTEGER :: H5FD_MEM_SUPER_F - INTEGER :: H5FD_MEM_BTREE_F - INTEGER :: H5FD_MEM_DRAW_F - INTEGER :: H5FD_MEM_GHEAP_F - INTEGER :: H5FD_MEM_LHEAP_F - INTEGER :: H5FD_MEM_OHDR_F - INTEGER :: H5FD_MEM_NTYPES_F - - EQUIVALENCE(H5FD_flags(1), H5FD_MPIO_INDEPENDENT_F) - EQUIVALENCE(H5FD_flags(2), H5FD_MPIO_COLLECTIVE_F) - EQUIVALENCE(H5FD_flags(3), H5FD_MEM_NOLIST_F) - EQUIVALENCE(H5FD_flags(4), H5FD_MEM_DEFAULT_F) - EQUIVALENCE(H5FD_flags(5), H5FD_MEM_SUPER_F) - EQUIVALENCE(H5FD_flags(6), H5FD_MEM_BTREE_F) - EQUIVALENCE(H5FD_flags(7), H5FD_MEM_DRAW_F) - EQUIVALENCE(H5FD_flags(8), H5FD_MEM_GHEAP_F) - EQUIVALENCE(H5FD_flags(9), H5FD_MEM_LHEAP_F) - EQUIVALENCE(H5FD_flags(10), H5FD_MEM_OHDR_F) - EQUIVALENCE(H5FD_flags(11), H5FD_MEM_NTYPES_F) - ! - ! H5FD file drivers flags declaration - ! - INTEGER, PARAMETER :: H5FD_HID_FLAGS_LEN = 7 - INTEGER(HID_T) :: H5FD_hid_flags(H5FD_HID_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5FD_HID_FLAGS/ - !DEC$endif - COMMON /H5FD_HID_FLAGS/ H5FD_hid_flags - - INTEGER(HID_T) :: H5FD_CORE_F - INTEGER(HID_T) :: H5FD_FAMILY_F - INTEGER(HID_T) :: H5FD_LOG_F - INTEGER(HID_T) :: H5FD_MPIO_F - INTEGER(HID_T) :: H5FD_MULTI_F - INTEGER(HID_T) :: H5FD_SEC2_F - INTEGER(HID_T) :: H5FD_STDIO_F - - EQUIVALENCE(H5FD_hid_flags(1), H5FD_CORE_F) - EQUIVALENCE(H5FD_hid_flags(2), H5FD_FAMILY_F) - EQUIVALENCE(H5FD_hid_flags(3), H5FD_LOG_F) - EQUIVALENCE(H5FD_hid_flags(4), H5FD_MPIO_F) - EQUIVALENCE(H5FD_hid_flags(5), H5FD_MULTI_F) - EQUIVALENCE(H5FD_hid_flags(6), H5FD_SEC2_F) - EQUIVALENCE(H5FD_hid_flags(7), H5FD_STDIO_F) - - ! - ! H5I flags declaration - ! - INTEGER, PARAMETER :: H5I_FLAGS_LEN = 7 - INTEGER :: H5I_flags(H5I_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5I_FLAGS/ - !DEC$endif - COMMON /H5I_FLAGS/ H5I_flags - - INTEGER :: H5I_FILE_F - INTEGER :: H5I_GROUP_F - INTEGER :: H5I_DATATYPE_F - INTEGER :: H5I_DATASPACE_F - INTEGER :: H5I_DATASET_F - INTEGER :: H5I_ATTR_F - INTEGER :: H5I_BADID_F - - EQUIVALENCE(H5I_flags(1), H5I_FILE_F) - EQUIVALENCE(H5I_flags(2), H5I_GROUP_F) - EQUIVALENCE(H5I_flags(3), H5I_DATATYPE_F) - EQUIVALENCE(H5I_flags(4), H5I_DATASPACE_F) - EQUIVALENCE(H5I_flags(5), H5I_DATASET_F) - EQUIVALENCE(H5I_flags(6), H5I_ATTR_F) - EQUIVALENCE(H5I_flags(7), H5I_BADID_F) - ! - ! H5L flags declaration - ! - INTEGER, PARAMETER :: H5L_FLAGS_LEN = 6 - INTEGER :: H5L_flags(H5L_FLAGS_LEN) - - INTEGER :: H5L_TYPE_ERROR_F - INTEGER :: H5L_TYPE_HARD_F - INTEGER :: H5L_TYPE_SOFT_F - INTEGER :: H5L_TYPE_EXTERNAL_F - INTEGER :: H5L_SAME_LOC_F - INTEGER :: H5L_LINK_CLASS_T_VERS_F - - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5L_FLAGS/ - !DEC$endif - COMMON /H5L_FLAGS/ H5L_flags - - EQUIVALENCE(H5L_flags(1), H5L_TYPE_ERROR_F) - EQUIVALENCE(H5L_flags(2), H5L_TYPE_HARD_F) - EQUIVALENCE(H5L_flags(3), H5L_TYPE_SOFT_F) - EQUIVALENCE(H5L_flags(4), H5L_TYPE_EXTERNAL_F) - EQUIVALENCE(H5L_flags(5), H5L_SAME_LOC_F) - EQUIVALENCE(H5L_flags(6), H5L_LINK_CLASS_T_VERS_F) - ! - ! H5O flags declaration - ! - INTEGER, PARAMETER :: H5O_FLAGS_LEN = 27 - INTEGER :: H5o_flags(H5O_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5O_FLAGS/ - !DEC$endif - COMMON /H5O_FLAGS/ H5O_flags - - INTEGER :: H5O_COPY_SHALLOW_HIERARCHY_F ! *** THESE VARIABLES DO - INTEGER :: H5O_COPY_EXPAND_SOFT_LINK_F ! NOT MATCH THE C VARIABLE - INTEGER :: H5O_COPY_EXPAND_EXT_LINK_F ! IN ORDER - INTEGER :: H5O_COPY_EXPAND_REFERENCE_F ! TO STAY UNDER THE - INTEGER :: H5O_COPY_WITHOUT_ATTR_FLAG_F - INTEGER :: H5O_COPY_PRESERVE_NULL_FLAG_F - INTEGER :: H5O_COPY_ALL_F - INTEGER :: H5O_SHMESG_NONE_FLAG_F - INTEGER :: H5O_SHMESG_SDSPACE_FLAG_F - INTEGER :: H5O_SHMESG_DTYPE_FLAG_F - INTEGER :: H5O_SHMESG_FILL_FLAG_F - INTEGER :: H5O_SHMESG_PLINE_FLAG_F - INTEGER :: H5O_SHMESG_ATTR_FLAG_F - INTEGER :: H5O_SHMESG_ALL_FLAG_F - INTEGER :: H5O_HDR_CHUNK0_SIZE_F - INTEGER :: H5O_HDR_ATTR_CRT_ORDER_TRACK_F ! 32 CHARACTER - INTEGER :: H5O_HDR_ATTR_CRT_ORDER_INDEX_F ! VARIABLE - INTEGER :: H5O_HDR_ATTR_STORE_PHASE_CHA_F ! LENGTH *** - INTEGER :: H5O_HDR_STORE_TIMES_F - INTEGER :: H5O_HDR_ALL_FLAGS_F - INTEGER :: H5O_SHMESG_MAX_NINDEXES_F - INTEGER :: H5O_SHMESG_MAX_LIST_SIZE_F - INTEGER :: H5O_TYPE_UNKNOWN_F - INTEGER :: H5O_TYPE_GROUP_F - INTEGER :: H5O_TYPE_DATASET_F - INTEGER :: H5O_TYPE_NAMED_DATATYPE_F - INTEGER :: H5O_TYPE_NTYPES_F - - EQUIVALENCE(h5o_flags(1) , H5O_COPY_SHALLOW_HIERARCHY_F) - EQUIVALENCE(h5o_flags(2) , H5O_COPY_EXPAND_SOFT_LINK_F) - EQUIVALENCE(h5o_flags(3) , H5O_COPY_EXPAND_EXT_LINK_F) - EQUIVALENCE(h5o_flags(4) , H5O_COPY_EXPAND_REFERENCE_F) - EQUIVALENCE(h5o_flags(5) , H5O_COPY_WITHOUT_ATTR_FLAG_F) - EQUIVALENCE(h5o_flags(6) , H5O_COPY_PRESERVE_NULL_FLAG_F) - EQUIVALENCE(h5o_flags(7) , H5O_COPY_ALL_F) - EQUIVALENCE(h5o_flags(8) , H5O_SHMESG_NONE_FLAG_F) - EQUIVALENCE(h5o_flags(9) , H5O_SHMESG_SDSPACE_FLAG_F) - EQUIVALENCE(h5o_flags(10) , H5O_SHMESG_DTYPE_FLAG_F) - EQUIVALENCE(h5o_flags(11) , H5O_SHMESG_FILL_FLAG_F) - EQUIVALENCE(h5o_flags(12) , H5O_SHMESG_PLINE_FLAG_F) - EQUIVALENCE(h5o_flags(13) , H5O_SHMESG_ATTR_FLAG_F) - EQUIVALENCE(h5o_flags(14) , H5O_SHMESG_ALL_FLAG_F) - EQUIVALENCE(h5o_flags(15) , H5O_HDR_CHUNK0_SIZE_F) - EQUIVALENCE(h5o_flags(16) , H5O_HDR_ATTR_CRT_ORDER_TRACK_F) - EQUIVALENCE(h5o_flags(17) , H5O_HDR_ATTR_CRT_ORDER_INDEX_F) - EQUIVALENCE(h5o_flags(18) , H5O_HDR_ATTR_STORE_PHASE_CHA_F) - EQUIVALENCE(h5o_flags(19) , H5O_HDR_STORE_TIMES_F) - EQUIVALENCE(h5o_flags(20) , H5O_HDR_ALL_FLAGS_F) - EQUIVALENCE(h5o_flags(21) , H5O_SHMESG_MAX_NINDEXES_F) - EQUIVALENCE(h5o_flags(22) , H5O_SHMESG_MAX_LIST_SIZE_F) - EQUIVALENCE(h5o_flags(23) , H5O_TYPE_UNKNOWN_F) - EQUIVALENCE(h5o_flags(24) , H5O_TYPE_GROUP_F) - EQUIVALENCE(h5o_flags(25) , H5O_TYPE_DATASET_F) - EQUIVALENCE(h5o_flags(26) , H5O_TYPE_NAMED_DATATYPE_F) - EQUIVALENCE(h5o_flags(27) , H5O_TYPE_NTYPES_F) - - ! - ! H5P flags declaration - ! - INTEGER, PARAMETER :: H5P_FLAGS_LEN = 18 - INTEGER(HID_T) H5P_flags(H5P_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5P_FLAGS/ - !DEC$endif - COMMON /H5P_FLAGS/ H5P_flags - - INTEGER(HID_T) :: H5P_FILE_CREATE_F - INTEGER(HID_T) :: H5P_FILE_ACCESS_F - INTEGER(HID_T) :: H5P_DATASET_CREATE_F - INTEGER(HID_T) :: H5P_DATASET_XFER_F - INTEGER(HID_T) :: H5P_FILE_MOUNT_F - INTEGER(HID_T) :: H5P_DEFAULT_F - INTEGER(HID_T) :: H5P_ROOT_F - INTEGER(HID_T) :: H5P_OBJECT_CREATE_F - INTEGER(HID_T) :: H5P_DATASET_ACCESS_F - INTEGER(HID_T) :: H5P_GROUP_CREATE_F - INTEGER(HID_T) :: H5P_GROUP_ACCESS_F - INTEGER(HID_T) :: H5P_DATATYPE_CREATE_F - INTEGER(HID_T) :: H5P_DATATYPE_ACCESS_F - INTEGER(HID_T) :: H5P_STRING_CREATE_F - INTEGER(HID_T) :: H5P_ATTRIBUTE_CREATE_F - INTEGER(HID_T) :: H5P_OBJECT_COPY_F - INTEGER(HID_T) :: H5P_LINK_CREATE_F - INTEGER(HID_T) :: H5P_LINK_ACCESS_F - - EQUIVALENCE(H5P_flags(1), H5P_FILE_CREATE_F) - EQUIVALENCE(H5P_flags(2), H5P_FILE_ACCESS_F) - EQUIVALENCE(H5P_flags(3), H5P_DATASET_CREATE_F) - EQUIVALENCE(H5P_flags(4), H5P_DATASET_XFER_F) - EQUIVALENCE(H5P_flags(5), H5P_FILE_MOUNT_F) - EQUIVALENCE(H5P_flags(6), H5P_DEFAULT_F) - EQUIVALENCE(H5P_flags(7), H5P_ROOT_F) - EQUIVALENCE(H5P_flags(8), H5P_OBJECT_CREATE_F) - EQUIVALENCE(H5P_flags(9), H5P_DATASET_ACCESS_F) - EQUIVALENCE(H5P_flags(10), H5P_GROUP_CREATE_F) - EQUIVALENCE(H5P_flags(11), H5P_GROUP_ACCESS_F) - EQUIVALENCE(H5P_flags(12), H5P_DATATYPE_CREATE_F) - EQUIVALENCE(H5P_flags(13), H5P_DATATYPE_ACCESS_F) - EQUIVALENCE(H5P_flags(14), H5P_STRING_CREATE_F) - EQUIVALENCE(H5P_flags(15), H5P_ATTRIBUTE_CREATE_F) - EQUIVALENCE(H5P_flags(16), H5P_OBJECT_COPY_F) - EQUIVALENCE(H5P_flags(17), H5P_LINK_CREATE_F) - EQUIVALENCE(H5P_flags(18), H5P_LINK_ACCESS_F) - - ! - ! H5P integers flags declaration - ! - INTEGER, PARAMETER :: H5P_FLAGS_INT_LEN = 2 - INTEGER :: H5P_flags_int(H5P_FLAGS_INT_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5P_FLAGS_INT/ - !DEC$endif - COMMON /H5P_FLAGS_INT/ H5P_flags_int - INTEGER :: H5P_CRT_ORDER_INDEXED_F - INTEGER :: H5P_CRT_ORDER_TRACKED_F - EQUIVALENCE(H5P_flags_int(1), H5P_CRT_ORDER_INDEXED_F) - EQUIVALENCE(H5P_flags_int(2), H5P_CRT_ORDER_TRACKED_F) - ! - ! H5R flags declaration - ! - INTEGER, PARAMETER :: H5R_FLAGS_LEN = 2 - INTEGER :: H5R_flags(H5R_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5R_FLAGS/ - !DEC$endif - COMMON /H5R_FLAGS/ H5R_flags - - INTEGER :: H5R_OBJECT_F - INTEGER :: H5R_DATASET_REGION_F - - EQUIVALENCE(H5R_flags(1), H5R_OBJECT_F) - EQUIVALENCE(H5R_flags(2), H5R_DATASET_REGION_F) - - ! - ! H5S flags declaration - ! - INTEGER, PARAMETER :: H5S_FLAGS_LEN = 19 - INTEGER :: H5S_flags(H5S_FLAGS_LEN) - INTEGER, PARAMETER :: H5S_HSIZE_FLAGS_LEN = 1 - INTEGER(HSIZE_T) H5S_hsize_flags(H5S_HSIZE_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5S_FLAGS/ - !DEC$ATTRIBUTES DLLEXPORT :: /H5S_HSIZE_FLAGS/ - !DEC$endif - COMMON /H5S_FLAGS/ H5S_flags - COMMON /H5S_HSIZE_FLAGS/ H5S_hsize_flags - - INTEGER(HSIZE_T) :: H5S_UNLIMITED_F - - INTEGER :: H5S_SCALAR_F - INTEGER :: H5S_SIMPLE_F - INTEGER :: H5S_NULL_F - - INTEGER :: H5S_ALL_F - - INTEGER :: H5S_SELECT_NOOP_F - INTEGER :: H5S_SELECT_SET_F - INTEGER :: H5S_SELECT_OR_F - INTEGER :: H5S_SELECT_AND_F - INTEGER :: H5S_SELECT_XOR_F - INTEGER :: H5S_SELECT_NOTB_F - INTEGER :: H5S_SELECT_NOTA_F - INTEGER :: H5S_SELECT_APPEND_F - INTEGER :: H5S_SELECT_PREPEND_F - INTEGER :: H5S_SELECT_INVALID_F - - INTEGER :: H5S_SEL_ERROR_F - INTEGER :: H5S_SEL_NONE_F - INTEGER :: H5S_SEL_POINTS_F - INTEGER :: H5S_SEL_HYPERSLABS_F - INTEGER :: H5S_SEL_ALL_F - - EQUIVALENCE(H5S_hsize_flags(1), H5S_UNLIMITED_F) - EQUIVALENCE(H5S_flags(1), H5S_SCALAR_F) - EQUIVALENCE(H5S_flags(2), H5S_SIMPLE_F) - EQUIVALENCE(H5S_flags(3), H5S_NULL_F) - EQUIVALENCE(H5S_flags(4), H5S_SELECT_SET_F) - EQUIVALENCE(H5S_flags(5), H5S_SELECT_OR_F) - EQUIVALENCE(H5S_flags(6), H5S_ALL_F) - - EQUIVALENCE(H5S_flags(7), H5S_SELECT_NOOP_F) - EQUIVALENCE(H5S_flags(8), H5S_SELECT_AND_F) - EQUIVALENCE(H5S_flags(9), H5S_SELECT_XOR_F) - EQUIVALENCE(H5S_flags(10), H5S_SELECT_NOTB_F) - EQUIVALENCE(H5S_flags(11), H5S_SELECT_NOTA_F) - EQUIVALENCE(H5S_flags(12), H5S_SELECT_APPEND_F) - EQUIVALENCE(H5S_flags(13), H5S_SELECT_PREPEND_F) - EQUIVALENCE(H5S_flags(14), H5S_SELECT_INVALID_F) - - - EQUIVALENCE(H5S_flags(15), H5S_SEL_ERROR_F) - EQUIVALENCE(H5S_flags(16), H5S_SEL_NONE_F) - EQUIVALENCE(H5S_flags(17), H5S_SEL_POINTS_F) - EQUIVALENCE(H5S_flags(18), H5S_SEL_HYPERSLABS_F) - EQUIVALENCE(H5S_flags(19), H5S_SEL_ALL_F) - - ! - ! H5T flags declaration - ! - INTEGER, PARAMETER :: H5T_FLAGS_LEN = 35 - INTEGER :: H5T_flags(H5T_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5T_FLAGS/ - !DEC$endif - COMMON /H5T_FLAGS/ H5T_flags - - INTEGER :: H5T_NO_CLASS_F - INTEGER :: H5T_INTEGER_F - INTEGER :: H5T_FLOAT_F - INTEGER :: H5T_TIME_F - INTEGER :: H5T_STRING_F - INTEGER :: H5T_BITFIELD_F - INTEGER :: H5T_OPAQUE_F - INTEGER :: H5T_COMPOUND_F - INTEGER :: H5T_REFERENCE_F - INTEGER :: H5T_ENUM_F - INTEGER :: H5T_VLEN_F - INTEGER :: H5T_ARRAY_F - INTEGER :: H5T_ORDER_LE_F - INTEGER :: H5T_ORDER_BE_F - INTEGER :: H5T_ORDER_VAX_F - INTEGER :: H5T_ORDER_NONE_F - INTEGER :: H5T_ORDER_MIXED_F - INTEGER :: H5T_PAD_ZERO_F - INTEGER :: H5T_PAD_ONE_F - INTEGER :: H5T_PAD_BACKGROUND_F - INTEGER :: H5T_PAD_ERROR_F - INTEGER :: H5T_SGN_NONE_F - INTEGER :: H5T_SGN_2_F - INTEGER :: H5T_SGN_ERROR_F - INTEGER :: H5T_NORM_IMPLIED_F - INTEGER :: H5T_NORM_MSBSET_F - INTEGER :: H5T_NORM_NONE_F - INTEGER :: H5T_CSET_ASCII_F - INTEGER :: H5T_CSET_UTF8_F - INTEGER :: H5T_STR_NULLTERM_F - INTEGER :: H5T_STR_NULLPAD_F - INTEGER :: H5T_STR_SPACEPAD_F - INTEGER :: H5T_STR_ERROR_F - INTEGER :: H5T_DIR_ASCEND_F - INTEGER :: H5T_DIR_DESCEND_F - - EQUIVALENCE(H5T_flags(1), H5T_NO_CLASS_F) - EQUIVALENCE(H5T_flags(2), H5T_INTEGER_F) - EQUIVALENCE(H5T_flags(3), H5T_FLOAT_F) - EQUIVALENCE(H5T_flags(4), H5T_TIME_F) - EQUIVALENCE(H5T_flags(5), H5T_STRING_F) - EQUIVALENCE(H5T_flags(6), H5T_BITFIELD_F) - EQUIVALENCE(H5T_flags(7), H5T_OPAQUE_F) - EQUIVALENCE(H5T_flags(8), H5T_COMPOUND_F) - EQUIVALENCE(H5T_flags(9), H5T_REFERENCE_F) - EQUIVALENCE(H5T_flags(10), H5T_ENUM_F) - EQUIVALENCE(H5T_flags(11), H5T_ORDER_LE_F) - EQUIVALENCE(H5T_flags(12), H5T_ORDER_BE_F) - EQUIVALENCE(H5T_flags(13), H5T_ORDER_MIXED_F) - EQUIVALENCE(H5T_flags(14), H5T_ORDER_VAX_F) - EQUIVALENCE(H5T_flags(15), H5T_ORDER_NONE_F) - EQUIVALENCE(H5T_flags(16), H5T_PAD_ZERO_F) - EQUIVALENCE(H5T_flags(17), H5T_PAD_ONE_F) - EQUIVALENCE(H5T_flags(18), H5T_PAD_BACKGROUND_F) - EQUIVALENCE(H5T_flags(19), H5T_PAD_ERROR_F) - EQUIVALENCE(H5T_flags(20), H5T_SGN_NONE_F) - EQUIVALENCE(H5T_flags(21), H5T_SGN_2_F) - EQUIVALENCE(H5T_flags(22), H5T_SGN_ERROR_F) - EQUIVALENCE(H5T_flags(23), H5T_NORM_IMPLIED_F) - EQUIVALENCE(H5T_flags(24), H5T_NORM_MSBSET_F) - EQUIVALENCE(H5T_flags(25), H5T_NORM_NONE_F) - EQUIVALENCE(H5T_flags(26), H5T_CSET_ASCII_F) - EQUIVALENCE(H5T_flags(27), H5T_CSET_UTF8_F) - EQUIVALENCE(H5T_flags(28), H5T_STR_NULLTERM_F) - EQUIVALENCE(H5T_flags(29), H5T_STR_NULLPAD_F) - EQUIVALENCE(H5T_flags(30), H5T_STR_SPACEPAD_F) - EQUIVALENCE(H5T_flags(31), H5T_STR_ERROR_F) - EQUIVALENCE(H5T_flags(32), H5T_VLEN_F) - EQUIVALENCE(H5T_flags(33), H5T_ARRAY_F) - EQUIVALENCE(H5T_flags(34), H5T_DIR_ASCEND_F) - EQUIVALENCE(H5T_flags(35), H5T_DIR_DESCEND_F) - ! - ! H5Z flags declaration - ! - INTEGER, PARAMETER :: H5Z_FLAGS_LEN = 20 - INTEGER :: H5Z_flags(H5Z_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5Z_FLAGS/ - !DEC$endif - COMMON /H5Z_FLAGS/ H5Z_flags - - INTEGER :: H5Z_FILTER_ERROR_F - INTEGER :: H5Z_FILTER_NONE_F - INTEGER :: H5Z_FILTER_ALL_F - INTEGER :: H5Z_FILTER_DEFLATE_F - INTEGER :: H5Z_FILTER_SHUFFLE_F - INTEGER :: H5Z_FILTER_FLETCHER32_F - INTEGER :: H5Z_FILTER_SZIP_F - INTEGER :: H5Z_ERROR_EDC_F - INTEGER :: H5Z_DISABLE_EDC_F - INTEGER :: H5Z_ENABLE_EDC_F - INTEGER :: H5Z_NO_EDC_F - INTEGER :: H5Z_FLAG_OPTIONAL_F - INTEGER :: H5Z_FILTER_ENCODE_ENABLED_F - INTEGER :: H5Z_FILTER_DECODE_ENABLED_F - INTEGER :: H5Z_FILTER_NBIT_F - INTEGER :: H5Z_FILTER_SCALEOFFSET_F - INTEGER :: H5Z_SO_FLOAT_DSCALE_F - INTEGER :: H5Z_SO_FLOAT_ESCALE_F - INTEGER :: H5Z_SO_INT_F - INTEGER :: H5Z_SO_INT_MINBITS_DEFAULT_F - - EQUIVALENCE(H5Z_flags(1), H5Z_FILTER_ERROR_F) - EQUIVALENCE(H5Z_flags(2), H5Z_FILTER_NONE_F) - EQUIVALENCE(H5Z_flags(3), H5Z_FILTER_DEFLATE_F) - EQUIVALENCE(H5Z_flags(4), H5Z_FILTER_SHUFFLE_F) - EQUIVALENCE(H5Z_flags(5), H5Z_FILTER_FLETCHER32_F) - EQUIVALENCE(H5Z_flags(6), H5Z_ERROR_EDC_F) - EQUIVALENCE(H5Z_flags(7), H5Z_DISABLE_EDC_F) - EQUIVALENCE(H5Z_flags(8), H5Z_ENABLE_EDC_F) - EQUIVALENCE(H5Z_flags(9), H5Z_NO_EDC_F) - EQUIVALENCE(H5Z_flags(10), H5Z_FILTER_SZIP_F) - EQUIVALENCE(H5Z_flags(11), H5Z_FLAG_OPTIONAL_F) - EQUIVALENCE(H5Z_flags(12), H5Z_FILTER_ENCODE_ENABLED_F) - EQUIVALENCE(H5Z_flags(13), H5Z_FILTER_DECODE_ENABLED_F) - EQUIVALENCE(H5Z_flags(14), H5Z_FILTER_ALL_F) - EQUIVALENCE(H5Z_flags(15), H5Z_FILTER_NBIT_F) - EQUIVALENCE(H5Z_flags(16), H5Z_FILTER_SCALEOFFSET_F) - EQUIVALENCE(H5Z_flags(17), H5Z_SO_FLOAT_DSCALE_F) - EQUIVALENCE(H5Z_flags(18), H5Z_SO_FLOAT_ESCALE_F) - EQUIVALENCE(H5Z_flags(19), H5Z_SO_INT_F) - EQUIVALENCE(H5Z_flags(20), H5Z_SO_INT_MINBITS_DEFAULT_F) - - ! - ! H5 Library flags declaration - ! - INTEGER, PARAMETER :: H5LIB_FLAGS_LEN = 2 - INTEGER :: H5LIB_flags(H5LIB_FLAGS_LEN) - !DEC$if defined(BUILD_HDF5_DLL) - !DEC$ATTRIBUTES DLLEXPORT :: /H5LIB_FLAGS/ - !DEC$endif - COMMON /H5LIB_FLAGS/ H5LIB_flags - INTEGER :: H5_SZIP_EC_OM_F - INTEGER :: H5_SZIP_NN_OM_F - ! - EQUIVALENCE(H5LIB_flags(1), H5_SZIP_EC_OM_F) - EQUIVALENCE(H5LIB_flags(2), H5_SZIP_NN_OM_F) - - - ! General H5 flags declarations - ! -!!$ INTEGER, PARAMETER :: H5_FLAGS_LEN = 2 -!!$ INTEGER H5_flags(H5_FLAGS_LEN) -!!$!DEC$if defined(BUILD_HDF5_DLL) -!!$!DEC$ATTRIBUTES DLLEXPORT :: /H5_FLAGS/ -!!$!DEC$endif -!!$ COMMON /H5_FLAGS/ H5_flags -!!$ -!!$ INTEGER :: _F -!!$ INTEGER :: H5F_SCOPE_LOCAL_F -!!$ -!!$ EQUIVALENCE(H5F_flags(1), H5F_SCOPE_GLOBAL_F) -!!$ EQUIVALENCE(H5F_flags(2), H5F_SCOPE_LOCAL_F) - -END MODULE H5GLOBAL - diff --git a/fortran/src/H5f90kit.c b/fortran/src/H5f90kit.c index 0bc721f..c6c874f 100644 --- a/fortran/src/H5f90kit.c +++ b/fortran/src/H5f90kit.c @@ -1,6 +1,6 @@ /****h* H5f90kit/H5f90kit * PURPOSE - * Routines from HDF4 to deal with C-FORTRAN issues: + * Routines from HDF4 to deal with C-FORTRAN issues: * * HD5f2cstring -- convert a Fortran string to a C string * HD5packFstring -- convert a C string into a Fortran string @@ -31,16 +31,16 @@ /****if* H5f90kit/HDf2cstring * NAME * HD5f2cstring -- convert a Fortran string to a C string - * char * HDf2cstring(fdesc, len) + * char * HDf2cstring(fdesc, len) * INPUTS * _fcd fdesc; IN: Fortran string descriptor - * int len; IN: length of Fortran string + * int len; IN: length of Fortran string * RETURNS - * Pointer to the C string if success, else NULL + * Pointer to the C string if success, else NULL * PURPOSE - * Chop off trailing blanks off of a Fortran string and - * move it into a newly allocated C string. It is up - * to the user to free this string. + * Chop off trailing blanks off of a Fortran string and + * move it into a newly allocated C string. It is up + * to the user to free this string. * SOURCE */ char * @@ -72,21 +72,21 @@ HD5f2cstring(_fcd fdesc, size_t len) /****if* H5f90kit/HD5packFstring * NAME * HD5packFstring -- convert a C string into a Fortran string - * int HD5packFstring(src, dest, len) + * int HD5packFstring(src, dest, len) * INPUTS - * char * src; IN: source string - * int len; IN: length of string + * char * src; IN: source string + * int len; IN: length of string * OUTPUTS - * char * dest; OUT: destination + * char * dest; OUT: destination * RETURNS * SUCCEED / FAIL * PURPOSE - * given a NULL terminated C string 'src' convert it to - * a space padded Fortran string 'dest' of length 'len' + * given a NULL terminated C string 'src' convert it to + * a space padded Fortran string 'dest' of length 'len' * - * This is very similar to HDc2fstr except that function does - * it in place and this one copies. We should probably only - * support one of these. + * This is very similar to HDc2fstr except that function does + * it in place and this one copies. We should probably only + * support one of these. * SOURCE */ void diff --git a/fortran/src/H5f90proto.h b/fortran/src/H5f90proto.h index 4784440..a07db22 100644 --- a/fortran/src/H5f90proto.h +++ b/fortran/src/H5f90proto.h @@ -18,6 +18,7 @@ #define _H5f90proto_H #include "H5public.h" +#include "H5f90.h" H5_FCDLL char * HD5f2cstring (_fcd fdesc, size_t len); H5_FCDLL void HD5packFstring(char *src, char *dest, size_t len); @@ -77,1236 +78,505 @@ typedef struct H5O_info_t_f { /* * Functions from H5Ff.c */ -#define nh5fcreate_c H5_FC_FUNC_(h5fcreate_c, H5FCREATE_C) -#define nh5fflush_c H5_FC_FUNC_(h5fflush_c, H5FFLUSH_C) -#define nh5fclose_c H5_FC_FUNC_(h5fclose_c, H5FCLOSE_C) -#define nh5fopen_c H5_FC_FUNC_(h5fopen_c, H5FOPEN_C) -#define nh5fis_hdf5_c H5_FC_FUNC_(h5fis_hdf5_c, H5FIS_HDF5_C) -#define nh5fmount_c H5_FC_FUNC_(h5fmount_c, H5FMOUNT_C) -#define nh5funmount_c H5_FC_FUNC_(h5funmount_c, H5FUNMOUNT_C) -#define nh5freopen_c H5_FC_FUNC_(h5freopen_c, H5FREOPEN_C) -#define nh5fget_create_plist_c H5_FC_FUNC_(h5fget_create_plist_c, H5FGET_CREATE_PLIST_C) -#define nh5fget_access_plist_c H5_FC_FUNC_(h5fget_access_plist_c, H5FGET_ACCESS_PLIST_C) -#define nh5fget_obj_count_c H5_FC_FUNC_(h5fget_obj_count_c, H5FGET_OBJ_COUNT_C) -#define nh5fget_obj_ids_c H5_FC_FUNC_(h5fget_obj_ids_c, H5FGET_OBJ_IDS_C) -#define nh5fget_freespace_c H5_FC_FUNC_(h5fget_freespace_c, H5FGET_FREESPACE_C) -#define nh5fget_name_c H5_FC_FUNC_(h5fget_name_c, H5FGET_NAME_C) -#define nh5fget_filesize_c H5_FC_FUNC_(h5fget_filesize_c, H5FGET_FILESIZE_C) - -H5_FCDLL int_f nh5fcreate_c (_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *crt_prp, hid_t_f *acc_prp, hid_t_f *file_id); -H5_FCDLL int_f nh5fopen_c (_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *acc_prp, hid_t_f *file_id); -H5_FCDLL int_f nh5fis_hdf5_c (_fcd name, int_f *namelen, int_f *flag); -H5_FCDLL int_f nh5fclose_c (hid_t_f *file_id); -H5_FCDLL int_f nh5fmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen, hid_t_f *file_id, hid_t_f *acc_prp); -H5_FCDLL int_f nh5funmount_c (hid_t_f *loc_id, _fcd dsetname, int_f *namelen); -H5_FCDLL int_f nh5freopen_c (hid_t_f *file_id1, hid_t_f *file_id2); -H5_FCDLL int_f nh5fget_create_plist_c (hid_t_f *file_id, hid_t_f *prop_id); -H5_FCDLL int_f nh5fget_access_plist_c (hid_t_f *file_id, hid_t_f *access_id); -H5_FCDLL int_f nh5fget_obj_count_c (hid_t_f *file_id, int_f *obj_type, size_t_f *obj_count); -H5_FCDLL int_f nh5fget_obj_ids_c (hid_t_f *file_id, int_f *obj_type, size_t_f *max_objs, hid_t_f *obj_ids, size_t_f *num_objs); -H5_FCDLL int_f nh5fget_freespace_c (hid_t_f *file_id, hssize_t_f *free_space); +H5_FCDLL int_f h5fcreate_c(_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *crt_prp, hid_t_f *acc_prp, hid_t_f *file_id); +H5_FCDLL int_f h5fopen_c(_fcd name, int_f *namelen, int_f *access_flags, hid_t_f *acc_prp, hid_t_f *file_id); +H5_FCDLL int_f h5fis_hdf5_c(_fcd name, int_f *namelen, int_f *flag); +H5_FCDLL int_f h5fclose_c(hid_t_f *file_id); +H5_FCDLL int_f h5fmount_c(hid_t_f *loc_id, _fcd dsetname, int_f *namelen, hid_t_f *file_id, hid_t_f *acc_prp); +H5_FCDLL int_f h5funmount_c(hid_t_f *loc_id, _fcd dsetname, int_f *namelen); +H5_FCDLL int_f h5freopen_c(hid_t_f *file_id1, hid_t_f *file_id2); +H5_FCDLL int_f h5fget_create_plist_c(hid_t_f *file_id, hid_t_f *prop_id); +H5_FCDLL int_f h5fget_access_plist_c(hid_t_f *file_id, hid_t_f *access_id); +H5_FCDLL int_f h5fget_obj_count_c(hid_t_f *file_id, int_f *obj_type, size_t_f *obj_count); +H5_FCDLL int_f h5fget_obj_ids_c(hid_t_f *file_id, int_f *obj_type, size_t_f *max_objs, hid_t_f *obj_ids, size_t_f *num_objs); +H5_FCDLL int_f h5fget_freespace_c(hid_t_f *file_id, hssize_t_f *free_space); H5_FCDLL int_f h5fget_file_image_c(hid_t_f *file_id, void *buf_ptr, size_t_f *buf_len, size_t_f *buf_req); -H5_FCDLL int_f nh5fflush_c (hid_t_f *obj_id, int_f *scope); -H5_FCDLL int_f nh5fget_name_c(hid_t_f *obj_id, size_t_f *size, _fcd buf, size_t_f *buflen); -H5_FCDLL int_f nh5fget_filesize_c(hid_t_f *file_id, hsize_t_f *size); +H5_FCDLL int_f h5fflush_c(hid_t_f *obj_id, int_f *scope); +H5_FCDLL int_f h5fget_name_c(hid_t_f *obj_id, size_t_f *size, _fcd buf, size_t_f *buflen); +H5_FCDLL int_f h5fget_filesize_c(hid_t_f *file_id, hsize_t_f *size); /* * Functions from H5Sf.c */ -#define nh5screate_simple_c H5_FC_FUNC_(h5screate_simple_c, H5SCREATE_SIMPLE_C) -#define nh5sclose_c H5_FC_FUNC_(h5sclose_c, H5SCLOSE_C) -#define nh5screate_c H5_FC_FUNC_(h5screate_c, H5SCREATE_C) -#define nh5scopy_c H5_FC_FUNC_(h5scopy_c, H5SCOPY_C) -#define nh5sget_select_hyper_nblocks_c H5_FC_FUNC_(h5sget_select_hyper_nblocks_c, H5SGET_SELECT_HYPER_NBLOCKS_C) -#define nh5sget_select_hyper_blocklist_c H5_FC_FUNC_(h5sget_select_hyper_blocklist_c, H5SGET_SELECT_HYPER_BLOCKLIST_C) -#define nh5sget_select_elem_npoints_c H5_FC_FUNC_(h5sget_select_elem_npoints_c, H5SGET_SELECT_ELEM_NPOINTS_C) -#define nh5sget_select_elem_pointlist_c H5_FC_FUNC_(h5sget_select_elem_pointlist_c, H5SGET_SELECT_ELEM_POINTLIST_C) -#define nh5sget_select_bounds_c H5_FC_FUNC_(h5sget_select_bounds_c, H5SGET_SELECT_BOUNDS_C) -#define nh5sselect_all_c H5_FC_FUNC_(h5sselect_all_c, H5SSELECT_ALL_C) -#define nh5sselect_none_c H5_FC_FUNC_(h5sselect_none_c, H5SSELECT_NONE_C) -#define nh5sselect_valid_c H5_FC_FUNC_(h5sselect_valid_c, H5SSELECT_VALID_C) -#define nh5sget_simple_extent_npoints_c H5_FC_FUNC_(h5sget_simple_extent_npoints_c, H5SGET_SIMPLE_EXTENT_NPOINTS_C) -#define nh5sget_select_npoints_c H5_FC_FUNC_(h5sget_select_npoints_c, H5SGET_SELECT_NPOINTS_C) -#define nh5sget_simple_extent_ndims_c H5_FC_FUNC_(h5sget_simple_extent_ndims_c, H5SGET_SIMPLE_EXTENT_NDIMS_C) -#define nh5sget_simple_extent_type_c H5_FC_FUNC_(h5sget_simple_extent_type_c, H5SGET_SIMPLE_EXTENT_TYPE_C) -#define nh5soffset_simple_c H5_FC_FUNC_(h5soffset_simple_c, H5SOFFSET_SIMPLE_C) -#define nh5sset_extent_simple_c H5_FC_FUNC_(h5sset_extent_simple_c, H5SSET_EXTENT_SIMPLE_C) -#define nh5sis_simple_c H5_FC_FUNC_(h5sis_simple_c, H5SIS_SIMPLE_C) -#define nh5sextent_class_c H5_FC_FUNC_(h5sextent_class_c, H5SEXTENT_CLASS_C) -#define nh5sget_simple_extent_dims_c H5_FC_FUNC_(h5sget_simple_extent_dims_c, H5SGET_SIMPLE_EXTENT_DIMS_C) -#define nh5sextent_copy_c H5_FC_FUNC_(h5sextent_copy_c, H5SEXTENT_COPY_C) -#define nh5sset_extent_none_c H5_FC_FUNC_(h5sset_extent_none_c, H5SSET_EXTENT_NONE_C) -#define nh5sselect_hyperslab_c H5_FC_FUNC_(h5sselect_hyperslab_c, H5SSELECT_HYPERSLAB_C) -#define nh5scombine_hyperslab_c H5_FC_FUNC_(h5scombine_hyperslab_c, H5SCOMBINE_HYPERSLAB_C) -#define nh5scombine_select_c H5_FC_FUNC_(h5scombine_select_c, H5SCOMBINE_SELECT_C) -#define nh5sselect_select_c H5_FC_FUNC_(h5sselect_select_c, H5SSELECT_SELECT_C) -#define nh5sget_select_type_c H5_FC_FUNC_(h5sget_select_type_c, H5SGET_SELECT_TYPE_C) -#define nh5sselect_elements_c H5_FC_FUNC_(h5sselect_elements_c, H5SSELECT_ELEMENTS_C) -#define nh5sdecode_c H5_FC_FUNC_(h5sdecode_c, H5SDECODE_C) -#define nh5sencode_c H5_FC_FUNC_(h5sencode_c, H5SENCODE_C) -#define nh5sextent_equal_c H5_FC_FUNC_(h5sextent_equal_c, H5SEXTENT_EQUAL_C) - -H5_FCDLL int_f nh5screate_simple_c ( int_f *rank, hsize_t_f *dims, hsize_t_f *maxdims, hid_t_f *space_id ); -H5_FCDLL int_f nh5sclose_c ( hid_t_f *space_id ); -H5_FCDLL int_f nh5screate_c ( int_f *classtype, hid_t_f *space_id ); -H5_FCDLL int_f nh5scopy_c ( hid_t_f *space_id , hid_t_f *new_space_id); -H5_FCDLL int_f nh5sget_select_hyper_nblocks_c( hid_t_f *space_id , hssize_t_f * num_blocks); -H5_FCDLL int_f nh5sget_select_hyper_blocklist_c( hid_t_f *space_id ,hsize_t_f * startblock, hsize_t_f * num_blocks, hsize_t_f * buf); -H5_FCDLL int_f nh5sget_select_bounds_c( hid_t_f *space_id , hsize_t_f * start, hsize_t_f * end); -H5_FCDLL int_f nh5sget_select_elem_npoints_c( hid_t_f *space_id , hssize_t_f * num_points); -H5_FCDLL int_f nh5sget_select_elem_pointlist_c( hid_t_f *space_id ,hsize_t_f * startpoint, hsize_t_f * numpoints, hsize_t_f * buf); -H5_FCDLL int_f nh5sselect_all_c ( hid_t_f *space_id ); -H5_FCDLL int_f nh5sselect_none_c ( hid_t_f *space_id ); -H5_FCDLL int_f nh5sselect_valid_c ( hid_t_f *space_id , int_f *flag ); -H5_FCDLL int_f nh5sget_simple_extent_npoints_c ( hid_t_f *space_id , hsize_t_f *npoints ); -H5_FCDLL int_f nh5sget_select_npoints_c ( hid_t_f *space_id , hssize_t_f *npoints ); -H5_FCDLL int_f nh5sget_simple_extent_ndims_c ( hid_t_f *space_id , int_f *ndims ); -H5_FCDLL int_f nh5sget_simple_extent_type_c ( hid_t_f *space_id , int_f *classtype); -H5_FCDLL int_f nh5soffset_simple_c ( hid_t_f *space_id , hssize_t_f *offset); -H5_FCDLL int_f nh5sset_extent_simple_c ( hid_t_f *space_id , int_f *rank, hsize_t_f * current_size, hsize_t_f *maximum_size); -H5_FCDLL int_f nh5sis_simple_c ( hid_t_f *space_id , int_f *flag ); -H5_FCDLL int_f nh5sextent_class_c ( hid_t_f *space_id , int_f *classtype); -H5_FCDLL int_f nh5sget_simple_extent_dims_c ( hid_t_f *space_id , hsize_t_f *dims, hsize_t_f *maxdims); -H5_FCDLL int_f nh5sextent_copy_c ( hid_t_f *dest_space_id , hid_t_f *source_space_id); -H5_FCDLL int_f nh5sset_extent_none_c ( hid_t_f *space_id ); -H5_FCDLL int_f nh5sselect_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block); -H5_FCDLL int_f nh5sget_select_type_c ( hid_t_f *space_id , int_f *op); -H5_FCDLL int_f nh5sselect_elements_c ( hid_t_f *space_id , int_f *op, size_t_f *nelements, hsize_t_f *coord); -H5_FCDLL int_f nh5scombine_hyperslab_c ( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block, hid_t_f *hyper_id); -H5_FCDLL int_f nh5scombine_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id, hid_t_f *ds_id); -H5_FCDLL int_f nh5sselect_select_c ( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id); -H5_FCDLL int_f nh5sdecode_c ( _fcd buf, hid_t_f *obj_id ); -H5_FCDLL int_f nh5sencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ); -H5_FCDLL int_f nh5sextent_equal_c ( hid_t_f * space1_id, hid_t_f *space2_id, hid_t_f *c_equal); +H5_FCDLL int_f h5screate_simple_c( int_f *rank, hsize_t_f *dims, hsize_t_f *maxdims, hid_t_f *space_id ); +H5_FCDLL int_f h5sclose_c( hid_t_f *space_id ); +H5_FCDLL int_f h5screate_c( int_f *classtype, hid_t_f *space_id ); +H5_FCDLL int_f h5scopy_c( hid_t_f *space_id , hid_t_f *new_space_id); +H5_FCDLL int_f h5sget_select_hyper_nblocks_c( hid_t_f *space_id , hssize_t_f * num_blocks); +H5_FCDLL int_f h5sget_select_hyper_blocklist_c( hid_t_f *space_id ,hsize_t_f * startblock, hsize_t_f * num_blocks, hsize_t_f * buf); +H5_FCDLL int_f h5sget_select_bounds_c( hid_t_f *space_id , hsize_t_f * start, hsize_t_f * end); +H5_FCDLL int_f h5sget_select_elem_npoints_c( hid_t_f *space_id , hssize_t_f * num_points); +H5_FCDLL int_f h5sget_select_elem_pointlist_c( hid_t_f *space_id ,hsize_t_f * startpoint, hsize_t_f * numpoints, hsize_t_f * buf); +H5_FCDLL int_f h5sselect_all_c( hid_t_f *space_id ); +H5_FCDLL int_f h5sselect_none_c( hid_t_f *space_id ); +H5_FCDLL int_f h5sselect_valid_c( hid_t_f *space_id , int_f *flag ); +H5_FCDLL int_f h5sget_simple_extent_npoints_c( hid_t_f *space_id , hsize_t_f *npoints ); +H5_FCDLL int_f h5sget_select_npoints_c( hid_t_f *space_id , hssize_t_f *npoints ); +H5_FCDLL int_f h5sget_simple_extent_ndims_c( hid_t_f *space_id , int_f *ndims ); +H5_FCDLL int_f h5sget_simple_extent_type_c( hid_t_f *space_id , int_f *classtype); +H5_FCDLL int_f h5soffset_simple_c( hid_t_f *space_id , hssize_t_f *offset); +H5_FCDLL int_f h5sset_extent_simple_c( hid_t_f *space_id , int_f *rank, hsize_t_f * current_size, hsize_t_f *maximum_size); +H5_FCDLL int_f h5sis_simple_c( hid_t_f *space_id , int_f *flag ); +H5_FCDLL int_f h5sget_simple_extent_dims_c( hid_t_f *space_id , hsize_t_f *dims, hsize_t_f *maxdims); +H5_FCDLL int_f h5sextent_copy_c( hid_t_f *dest_space_id , hid_t_f *source_space_id); +H5_FCDLL int_f h5sset_extent_none_c( hid_t_f *space_id ); +H5_FCDLL int_f h5sselect_hyperslab_c( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block); +H5_FCDLL int_f h5sget_select_type_c( hid_t_f *space_id , int_f *op); +H5_FCDLL int_f h5sselect_elements_c( hid_t_f *space_id , int_f *op, size_t_f *nelements, hsize_t_f *coord); +H5_FCDLL int_f h5scombine_hyperslab_c( hid_t_f *space_id , int_f *op, hsize_t_f *start, hsize_t_f *count, hsize_t_f *stride, hsize_t_f *block, hid_t_f *hyper_id); +H5_FCDLL int_f h5scombine_select_c( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id, hid_t_f *ds_id); +H5_FCDLL int_f h5sselect_select_c( hid_t_f *space1_id , int_f *op, hid_t_f *space2_id); +H5_FCDLL int_f h5sdecode_c( _fcd buf, hid_t_f *obj_id ); +H5_FCDLL int_f h5sencode_c(_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ); +H5_FCDLL int_f h5sextent_equal_c( hid_t_f * space1_id, hid_t_f *space2_id, hid_t_f *c_equal); /* * Functions from H5Df.c */ -#define nh5dcreate_c H5_FC_FUNC_(h5dcreate_c, H5DCREATE_C) -#define nh5dclose_c H5_FC_FUNC_(h5dclose_c, H5DCLOSE_C) -#define nh5dopen_c H5_FC_FUNC_(h5dopen_c, H5DOPEN_C) -#define nh5dwrite_c H5_FC_FUNC_(h5dwrite_c, H5DWRITE_C) -#define nh5dwrite_integer_s_c H5_FC_FUNC_(h5dwrite_integer_s_c, H5DWRITE_INTEGER_S_C) -#define nh5dwrite_integer_1_c H5_FC_FUNC_(h5dwrite_integer_1_c, H5DWRITE_INTEGER_1_C) -#define nh5dwrite_integer_2_c H5_FC_FUNC_(h5dwrite_integer_2_c, H5DWRITE_INTEGER_2_C) -#define nh5dwrite_integer_3_c H5_FC_FUNC_(h5dwrite_integer_3_c, H5DWRITE_INTEGER_3_C) -#define nh5dwrite_integer_4_c H5_FC_FUNC_(h5dwrite_integer_4_c, H5DWRITE_INTEGER_4_C) -#define nh5dwrite_integer_5_c H5_FC_FUNC_(h5dwrite_integer_5_c, H5DWRITE_INTEGER_5_C) -#define nh5dwrite_integer_6_c H5_FC_FUNC_(h5dwrite_integer_6_c, H5DWRITE_INTEGER_6_C) -#define nh5dwrite_integer_7_c H5_FC_FUNC_(h5dwrite_integer_7_c, H5DWRITE_INTEGER_7_C) -#define nh5dwrite_real_s_c H5_FC_FUNC_(h5dwrite_real_s_c, H5DWRITE_REAL_S_C) -#define nh5dwrite_real_1_c H5_FC_FUNC_(h5dwrite_real_1_c, H5DWRITE_REAL_1_C) -#define nh5dwrite_real_2_c H5_FC_FUNC_(h5dwrite_real_2_c, H5DWRITE_REAL_2_C) -#define nh5dwrite_real_3_c H5_FC_FUNC_(h5dwrite_real_3_c, H5DWRITE_REAL_3_C) -#define nh5dwrite_real_4_c H5_FC_FUNC_(h5dwrite_real_4_c, H5DWRITE_REAL_4_C) -#define nh5dwrite_real_5_c H5_FC_FUNC_(h5dwrite_real_5_c, H5DWRITE_REAL_5_C) -#define nh5dwrite_real_6_c H5_FC_FUNC_(h5dwrite_real_6_c, H5DWRITE_REAL_6_C) -#define nh5dwrite_real_7_c H5_FC_FUNC_(h5dwrite_real_7_c, H5DWRITE_REAL_7_C) -#define nh5dwrite_double_s_c H5_FC_FUNC_(h5dwrite_double_s_c, H5DWRITE_DOUBLE_S_C) -#define nh5dwrite_double_1_c H5_FC_FUNC_(h5dwrite_double_1_c, H5DWRITE_DOUBLE_1_C) -#define nh5dwrite_double_2_c H5_FC_FUNC_(h5dwrite_double_2_c, H5DWRITE_DOUBLE_2_C) -#define nh5dwrite_double_3_c H5_FC_FUNC_(h5dwrite_double_3_c, H5DWRITE_DOUBLE_3_C) -#define nh5dwrite_double_4_c H5_FC_FUNC_(h5dwrite_double_4_c, H5DWRITE_DOUBLE_4_C) -#define nh5dwrite_double_5_c H5_FC_FUNC_(h5dwrite_double_5_c, H5DWRITE_DOUBLE_5_C) -#define nh5dwrite_double_6_c H5_FC_FUNC_(h5dwrite_double_6_c, H5DWRITE_DOUBLE_6_C) -#define nh5dwrite_double_7_c H5_FC_FUNC_(h5dwrite_double_7_c, H5DWRITE_DOUBLE_7_C) -#define nh5dwrite_ref_obj_c H5_FC_FUNC_(h5dwrite_ref_obj_c, H5DWRITE_REF_OBJ_C) -#define nh5dwrite_ref_reg_c H5_FC_FUNC_(h5dwrite_ref_reg_c, H5DWRITE_REF_REG_C) -#define nh5dwritec_c H5_FC_FUNC_(h5dwritec_c, H5DWRITEC_C) -#define nh5dwritec_s_c H5_FC_FUNC_(h5dwritec_s_c, H5DWRITEC_S_C) -#define nh5dwritec_1_c H5_FC_FUNC_(h5dwritec_1_c, H5DWRITEC_1_C) -#define nh5dwritec_2_c H5_FC_FUNC_(h5dwritec_2_c, H5DWRITEC_2_C) -#define nh5dwritec_3_c H5_FC_FUNC_(h5dwritec_3_c, H5DWRITEC_3_C) -#define nh5dwritec_4_c H5_FC_FUNC_(h5dwritec_4_c, H5DWRITEC_4_C) -#define nh5dwritec_5_c H5_FC_FUNC_(h5dwritec_5_c, H5DWRITEC_5_C) -#define nh5dwritec_6_c H5_FC_FUNC_(h5dwritec_6_c, H5DWRITEC_6_C) -#define nh5dwritec_7_c H5_FC_FUNC_(h5dwritec_7_c, H5DWRITEC_7_C) -#define nh5dread_c H5_FC_FUNC_(h5dread_c, H5DREAD_C) -#define nh5dread_integer_s_c H5_FC_FUNC_(h5dread_integer_s_c, H5DREAD_INTEGER_S_C) -#define nh5dread_integer_1_c H5_FC_FUNC_(h5dread_integer_1_c, H5DREAD_INTEGER_1_C) -#define nh5dread_integer_2_c H5_FC_FUNC_(h5dread_integer_2_c, H5DREAD_INTEGER_2_C) -#define nh5dread_integer_3_c H5_FC_FUNC_(h5dread_integer_3_c, H5DREAD_INTEGER_3_C) -#define nh5dread_integer_4_c H5_FC_FUNC_(h5dread_integer_4_c, H5DREAD_INTEGER_4_C) -#define nh5dread_integer_5_c H5_FC_FUNC_(h5dread_integer_5_c, H5DREAD_INTEGER_5_C) -#define nh5dread_integer_6_c H5_FC_FUNC_(h5dread_integer_6_c, H5DREAD_INTEGER_6_C) -#define nh5dread_integer_7_c H5_FC_FUNC_(h5dread_integer_7_c, H5DREAD_INTEGER_7_C) -#define nh5dread_real_s_c H5_FC_FUNC_(h5dread_real_s_c, H5DREAD_REAL_S_C) -#define nh5dread_real_1_c H5_FC_FUNC_(h5dread_real_1_c, H5DREAD_REAL_1_C) -#define nh5dread_real_2_c H5_FC_FUNC_(h5dread_real_2_c, H5DREAD_REAL_2_C) -#define nh5dread_real_3_c H5_FC_FUNC_(h5dread_real_3_c, H5DREAD_REAL_3_C) -#define nh5dread_real_4_c H5_FC_FUNC_(h5dread_real_4_c, H5DREAD_REAL_4_C) -#define nh5dread_real_5_c H5_FC_FUNC_(h5dread_real_5_c, H5DREAD_REAL_5_C) -#define nh5dread_real_6_c H5_FC_FUNC_(h5dread_real_6_c, H5DREAD_REAL_6_C) -#define nh5dread_real_7_c H5_FC_FUNC_(h5dread_real_7_c, H5DREAD_REAL_7_C) -#define nh5dread_double_s_c H5_FC_FUNC_(h5dread_double_s_c, H5DREAD_DOUBLE_S_C) -#define nh5dread_double_1_c H5_FC_FUNC_(h5dread_double_1_c, H5DREAD_DOUBLE_1_C) -#define nh5dread_double_2_c H5_FC_FUNC_(h5dread_double_2_c, H5DREAD_DOUBLE_2_C) -#define nh5dread_double_3_c H5_FC_FUNC_(h5dread_double_3_c, H5DREAD_DOUBLE_3_C) -#define nh5dread_double_4_c H5_FC_FUNC_(h5dread_double_4_c, H5DREAD_DOUBLE_4_C) -#define nh5dread_double_5_c H5_FC_FUNC_(h5dread_double_5_c, H5DREAD_DOUBLE_5_C) -#define nh5dread_double_6_c H5_FC_FUNC_(h5dread_double_6_c, H5DREAD_DOUBLE_6_C) -#define nh5dread_double_7_c H5_FC_FUNC_(h5dread_double_7_c, H5DREAD_DOUBLE_7_C) -#define nh5dread_c_b H5_FC_FUNC_(h5dread_c_b, H5DREAD_C_B) -#define nh5dread_ref_reg_c H5_FC_FUNC_(h5dread_ref_reg_c, H5DREAD_REF_REG_C) -#define nh5dread_ref_obj_c H5_FC_FUNC_(h5dread_ref_obj_c, H5DREAD_REF_OBJ_C) -#define nh5dreadc_c H5_FC_FUNC_(h5dreadc_c, H5DREADC_C) -#define nh5dreadc_s_c H5_FC_FUNC_(h5dreadc_s_c, H5DREADC_S_C) -#define nh5dreadc_1_c H5_FC_FUNC_(h5dreadc_1_c, H5DREADC_1_C) -#define nh5dreadc_2_c H5_FC_FUNC_(h5dreadc_2_c, H5DREADC_2_C) -#define nh5dreadc_3_c H5_FC_FUNC_(h5dreadc_3_c, H5DREADC_3_C) -#define nh5dreadc_4_c H5_FC_FUNC_(h5dreadc_4_c, H5DREADC_4_C) -#define nh5dreadc_5_c H5_FC_FUNC_(h5dreadc_5_c, H5DREADC_5_C) -#define nh5dreadc_6_c H5_FC_FUNC_(h5dreadc_6_c, H5DREADC_6_C) -#define nh5dreadc_7_c H5_FC_FUNC_(h5dreadc_7_c, H5DREADC_7_C) -#define nh5dreadc_c_b H5_FC_FUNC_(h5dreadc_c_b, H5DREADC_C_B) -#define nh5dget_space_c H5_FC_FUNC_(h5dget_space_c, H5DGET_SPACE_C) -#define nh5dget_type_c H5_FC_FUNC_(h5dget_type_c, H5DGET_TYPE_C) -#define nh5dget_create_plist_c H5_FC_FUNC_(h5dget_create_plist_c, H5DGET_CREATE_PLIST_C) -#define nh5dset_extent_c H5_FC_FUNC_(h5dset_extent_c, H5DSET_EXTENT_C) -#define nh5dget_storage_size_c H5_FC_FUNC_(h5dget_storage_size_c, H5DGET_STORAGE_SIZE_C) -#define nh5dvlen_get_max_len_c H5_FC_FUNC_(h5dvlen_get_max_len_c, H5DVLEN_GET_MAX_LEN_C) -#define nh5dwrite_vl_integer_c H5_FC_FUNC_(h5dwrite_vl_integer_c, H5DWRITE_VL_INTEGER_C) -#define nh5dread_vl_integer_c H5_FC_FUNC_(h5dread_vl_integer_c, H5DREAD_VL_INTEGER_C) -#define nh5dwrite_vl_real_c H5_FC_FUNC_(h5dwrite_vl_real_c, H5DWRITE_VL_REAL_C) -#define nh5dread_vl_real_c H5_FC_FUNC_(h5dread_vl_real_c, H5DREAD_VL_REAL_C) -#define nh5dwrite_vl_string_c H5_FC_FUNC_(h5dwrite_vl_string_c, H5DWRITE_VL_STRING_C) -#define nh5dread_vl_string_c H5_FC_FUNC_(h5dread_vl_string_c, H5DREAD_VL_STRING_C) -#define nh5dfillc_c H5_FC_FUNC_(h5dfillc_c, H5DFILLC_C) -#define nh5dfill_integer_c H5_FC_FUNC_(h5dfill_integer_c, H5DFILL_INTEGER_C) -#define nh5dfill_real_c H5_FC_FUNC_(h5dfill_real_c, H5DFILL_REAL_C) -#define nh5dfill_double_c H5_FC_FUNC_(h5dfill_double_c, H5DFILL_DOUBLE_C) -#define nh5dget_space_status_c H5_FC_FUNC_(h5dget_space_status_c, H5DGET_SPACE_STATUS_C) -#define nh5dcreate_anon_c H5_FC_FUNC_(h5dcreate_anon_c, H5DCREATE_ANON_C) -#define nh5dget_access_plist_c H5_FC_FUNC_(h5dget_access_plist_c, H5DGET_ACCESS_PLIST_C) - -H5_FCDLL int_f nh5dcreate_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *space_id, +H5_FCDLL int_f h5dcreate_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *lcpl_id, hid_t_f *dcpl_id, hid_t_f *dapl_id, hid_t_f *dset_id); -H5_FCDLL int_f nh5dopen_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *dapl_id, hid_t_f *dset_id); -H5_FCDLL int_f nh5dclose_c ( hid_t_f *dset_id ); -H5_FCDLL int_f nh5dwrite_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_integer_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dwrite_real_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_real_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dwrite_double_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_double_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dwrite_vl_integer_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dwrite_vl_real_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dwrite_vl_string_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dwrite_ref_obj_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, haddr_t_f *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwrite_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dwritec_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dwritec_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dwritec_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dread_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dread_integer_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_integer_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dread_real_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_real_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dread_double_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_double_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dread_vl_integer_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dread_vl_real_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dread_vl_string_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len); -H5_FCDLL int_f nh5dread_ref_obj_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, haddr_t_f * buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dread_ref_reg_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f * buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dreadc_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); - -H5_FCDLL int_f nh5dreadc_s_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_1_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_2_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_3_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_4_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_5_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_6_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dreadc_7_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims); -H5_FCDLL int_f nh5dget_access_plist_c (hid_t_f *dset_id, hid_t_f *plist_id); - - -H5_FCDLL int_f nh5dget_space_c ( hid_t_f *dset_id , hid_t_f *space_id); -H5_FCDLL int_f nh5dget_type_c ( hid_t_f *dset_id , hid_t_f *type_id); -H5_FCDLL int_f nh5dget_create_plist_c ( hid_t_f *dset_id , hid_t_f *plist_id); -H5_FCDLL int_f nh5dset_extent_c ( hid_t_f *dset_id , hsize_t_f *dims); -H5_FCDLL int_f nh5dvlen_get_max_len_c(hid_t_f *dataset_id, hid_t_f *type_id, hid_t_f *space_id, size_t_f *len); -H5_FCDLL int_f nh5dget_storage_size_c(hid_t_f *dataset_id, hsize_t_f *size); -H5_FCDLL int_f nh5dfillc_c(_fcd fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, _fcd buf, hid_t_f *mem_type_id); +H5_FCDLL int_f h5dopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *dapl_id, hid_t_f *dset_id); +H5_FCDLL int_f h5dclose_c( hid_t_f *dset_id ); + +H5_FCDLL int_f h5dwrite_vl_integer_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dwrite_vl_real_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dwrite_vl_string_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dwrite_ref_reg_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims); +H5_FCDLL int_f h5dread_vl_integer_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f *buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dread_vl_real_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, real_f *buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dread_vl_string_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, _fcd buf, hsize_t_f *dims, size_t_f *len); +H5_FCDLL int_f h5dread_ref_reg_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, int_f * buf, hsize_t_f *dims); +H5_FCDLL int_f h5dget_access_plist_c(hid_t_f *dset_id, hid_t_f *plist_id); +H5_FCDLL int_f h5dget_space_c( hid_t_f *dset_id , hid_t_f *space_id); +H5_FCDLL int_f h5dget_type_c( hid_t_f *dset_id , hid_t_f *type_id); +H5_FCDLL int_f h5dget_create_plist_c( hid_t_f *dset_id , hid_t_f *plist_id); +H5_FCDLL int_f h5dset_extent_c( hid_t_f *dset_id , hsize_t_f *dims); +H5_FCDLL int_f h5dvlen_get_max_len_c(hid_t_f *dataset_id, hid_t_f *type_id, hid_t_f *space_id, size_t_f *len); +H5_FCDLL int_f h5dget_storage_size_c(hid_t_f *dataset_id, hsize_t_f *size); H5_FCDLL int_f h5dfill_c(void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id); -H5_FCDLL int_f nh5dfill_integer_c(void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id); -H5_FCDLL int_f nh5dfill_real_c(void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id); -H5_FCDLL int_f nh5dfill_double_c(void * fill_value, hid_t_f *fill_type_id, hid_t_f *space_id, void * buf, hid_t_f *mem_type_id); -H5_FCDLL int_f nh5dget_space_status_c ( hid_t_f *dset_id, int_f *flag); -H5_FCDLL int_f nh5dcreate_anon_c (hid_t_f *loc_id, hid_t_f *type_id, hid_t_f *space_id, +H5_FCDLL int_f h5dget_space_status_c( hid_t_f *dset_id, int_f *flag); +H5_FCDLL int_f h5dcreate_anon_c(hid_t_f *loc_id, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *dcpl_id, hid_t_f *dapl_id, hid_t_f *dset_id); -H5_FCDLL int_f h5dwrite_f_c (hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, +H5_FCDLL int_f h5dwrite_f_c(hid_t_f *dset_id, hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf); -H5_FCDLL int_f h5dread_f_c ( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, +H5_FCDLL int_f h5dread_f_c( hid_t_f *dset_id , hid_t_f *mem_type_id, hid_t_f *mem_space_id, hid_t_f *file_space_id, hid_t_f *xfer_prp, void *buf); -H5_FCDLL int_f h5dvlen_reclaim_c (hid_t_f *type_id , hid_t_f *space_id, hid_t_f *plist_id, void *buf); +H5_FCDLL int_f h5dvlen_reclaim_c(hid_t_f *type_id , hid_t_f *space_id, hid_t_f *plist_id, void *buf); + /* * Functions from H5Gf.c */ -#define nh5gcreate_c H5_FC_FUNC_(h5gcreate_c, H5GCREATE_C) -#define nh5gclose_c H5_FC_FUNC_(h5gclose_c, H5GCLOSE_C) -#define nh5gopen_c H5_FC_FUNC_(h5gopen_c, H5GOPEN_C) -#define nh5gget_obj_info_idx_c H5_FC_FUNC_(h5gget_obj_info_idx_c, H5GGET_OBJ_INFO_IDX_C) -#define nh5gn_members_c H5_FC_FUNC_(h5gn_members_c, H5GN_MEMBERS_C) -#define nh5glink_c H5_FC_FUNC_(h5glink_c, H5GLINK_C) -#define nh5glink2_c H5_FC_FUNC_(h5glink2_c, H5GLINK2_C) -#define nh5gunlink_c H5_FC_FUNC_(h5gunlink_c, H5GUNLINK_C) -#define nh5gmove_c H5_FC_FUNC_(h5gmove_c, H5GMOVE_C) -#define nh5gmove2_c H5_FC_FUNC_(h5gmove2_c, H5GMOVE2_C) -#define nh5gget_linkval_c H5_FC_FUNC_(h5gget_linkval_c, H5GGET_LINKVAL_C) -#define nh5gset_comment_c H5_FC_FUNC_(h5gset_comment_c, H5GSET_COMMENT_C) -#define nh5gget_comment_c H5_FC_FUNC_(h5gget_comment_c, H5GGET_COMMENT_C) -#define nh5gcreate_anon_c H5_FC_FUNC_(h5gcreate_anon_c, H5GCREATE_ANON_C) -#define nh5gget_create_plist_c H5_FC_FUNC_(h5gget_create_plist_c, H5GGET_CREATE_PLIST_C) -#define nh5gget_info_c H5_FC_FUNC_(h5gget_info_c, H5GGET_INFO_C) -#define nh5gget_info_by_idx_c H5_FC_FUNC_(h5gget_info_by_idx_c, H5GGET_INFO_BY_IDX_C) -#define nh5gget_info_by_name_c H5_FC_FUNC_(h5gget_info_by_name_c, H5GGET_INFO_BY_NAME_C) - - -H5_FCDLL int_f nh5gcreate_c (hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size_hint, hid_t_f *grp_id, +H5_FCDLL int_f h5gcreate_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size_hint, hid_t_f *grp_id, hid_t_f *lcpl_id, hid_t_f *gcpl_id, hid_t_f *gapl_id); -H5_FCDLL int_f nh5gopen_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *gapl_id, hid_t_f *grp_id); -H5_FCDLL int_f nh5gclose_c ( hid_t_f *grp_id ); -H5_FCDLL int_f nh5gget_obj_info_idx_c (hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *idx, _fcd obj_name, int_f *obj_namelen, int_f *obj_type); -H5_FCDLL int_f nh5gn_members_c (hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *nmembers); -H5_FCDLL int_f nh5glink_c (hid_t_f *loc_id, int_f *link_type, _fcd current_name, int_f *current_namelen, _fcd new_name, int_f *new_namelen); -H5_FCDLL int_f nh5glink2_c (hid_t_f *cur_loc_id, _fcd cur_name, int_f *cur_namelen, int_f *link_type, hid_t_f *new_loc_id, _fcd new_name, int_f *new_namelen); -H5_FCDLL int_f nh5gunlink_c (hid_t_f *loc_id, _fcd name, int_f *namelen); -H5_FCDLL int_f nh5gmove_c (hid_t_f *loc_id, _fcd src_name, int_f *src_namelen, _fcd dst_name, int_f *dst_namelen); -H5_FCDLL int_f nh5gmove2_c (hid_t_f *src_loc_id, _fcd src_name, int_f *src_namelen, hid_t_f *dst_loc_id,_fcd dst_name, int_f *dst_namelen); -H5_FCDLL int_f nh5gget_linkval_c (hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size, _fcd value ); -H5_FCDLL int_f nh5gset_comment_c (hid_t_f *loc_id, _fcd name, int_f *namelen, _fcd comment, int_f *commentlen); -H5_FCDLL int_f nh5gget_comment_c (hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *bufsize, _fcd comment); -H5_FCDLL int_f nh5gcreate_anon_c (hid_t_f *loc_id, hid_t_f *gcpl_id, hid_t_f *gapl_id, hid_t_f *grp_id); -H5_FCDLL int_f nh5gget_create_plist_c(hid_t_f *grp_id, hid_t_f *gcpl_id ); -H5_FCDLL int_f nh5gget_info_c (hid_t_f *group_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted); -H5_FCDLL int_f nh5gget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +H5_FCDLL int_f h5gopen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *gapl_id, hid_t_f *grp_id); +H5_FCDLL int_f h5gclose_c( hid_t_f *grp_id ); +H5_FCDLL int_f h5gget_obj_info_idx_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *idx, _fcd obj_name, int_f *obj_namelen, int_f *obj_type); +H5_FCDLL int_f h5gn_members_c(hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *nmembers); +H5_FCDLL int_f h5glink_c(hid_t_f *loc_id, int_f *link_type, _fcd current_name, int_f *current_namelen, _fcd new_name, int_f *new_namelen); +H5_FCDLL int_f h5glink2_c(hid_t_f *cur_loc_id, _fcd cur_name, int_f *cur_namelen, int_f *link_type, hid_t_f *new_loc_id, _fcd new_name, int_f *new_namelen); +H5_FCDLL int_f h5gunlink_c(hid_t_f *loc_id, _fcd name, int_f *namelen); +H5_FCDLL int_f h5gmove_c(hid_t_f *loc_id, _fcd src_name, int_f *src_namelen, _fcd dst_name, int_f *dst_namelen); +H5_FCDLL int_f h5gmove2_c(hid_t_f *src_loc_id, _fcd src_name, int_f *src_namelen, hid_t_f *dst_loc_id,_fcd dst_name, int_f *dst_namelen); +H5_FCDLL int_f h5gget_linkval_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *size, _fcd value ); +H5_FCDLL int_f h5gset_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, _fcd comment, int_f *commentlen); +H5_FCDLL int_f h5gget_comment_c(hid_t_f *loc_id, _fcd name, int_f *namelen, size_t_f *bufsize, _fcd comment); +H5_FCDLL int_f h5gcreate_anon_c(hid_t_f *loc_id, hid_t_f *gcpl_id, hid_t_f *gapl_id, hid_t_f *grp_id); +H5_FCDLL int_f h5gget_create_plist_c(hid_t_f *grp_id, hid_t_f *gcpl_id ); +H5_FCDLL int_f h5gget_info_c(hid_t_f *group_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted); +H5_FCDLL int_f h5gget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted); -H5_FCDLL int_f nh5gget_info_by_name_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, hid_t_f *lapl_id, +H5_FCDLL int_f h5gget_info_by_name_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, hid_t_f *lapl_id, int_f *storage_type, int_f *nlinks, int_f *max_corder, int_f *mounted); /* * Functions from H5Af.c */ -#define nh5acreate_c H5_FC_FUNC_(h5acreate_c, H5ACREATE_C) -#define nh5aclose_c H5_FC_FUNC_(h5aclose_c, H5ACLOSE_C) -#define nh5aopen_name_c H5_FC_FUNC_(h5aopen_name_c, H5AOPEN_NAME_C) -#define nh5awrite_c H5_FC_FUNC_(h5awrite_c, H5AWRITE_C) -#define nh5awrite_integer_s_c H5_FC_FUNC_(h5awrite_integer_s_c, H5AWRITE_INTEGER_S_C) -#define nh5awrite_integer_1_c H5_FC_FUNC_(h5awrite_integer_1_c, H5AWRITE_INTEGER_1_C) -#define nh5awrite_integer_2_c H5_FC_FUNC_(h5awrite_integer_2_c, H5AWRITE_INTEGER_2_C) -#define nh5awrite_integer_3_c H5_FC_FUNC_(h5awrite_integer_3_c, H5AWRITE_INTEGER_3_C) -#define nh5awrite_integer_4_c H5_FC_FUNC_(h5awrite_integer_4_c, H5AWRITE_INTEGER_4_C) -#define nh5awrite_integer_5_c H5_FC_FUNC_(h5awrite_integer_5_c, H5AWRITE_INTEGER_5_C) -#define nh5awrite_integer_6_c H5_FC_FUNC_(h5awrite_integer_6_c, H5AWRITE_INTEGER_6_C) -#define nh5awrite_integer_7_c H5_FC_FUNC_(h5awrite_integer_7_c, H5AWRITE_INTEGER_7_C) -#define nh5awrite_real_s_c H5_FC_FUNC_(h5awrite_real_s_c, H5AWRITE_REAL_S_C) -#define nh5awrite_real_1_c H5_FC_FUNC_(h5awrite_real_1_c, H5AWRITE_REAL_1_C) -#define nh5awrite_real_2_c H5_FC_FUNC_(h5awrite_real_2_c, H5AWRITE_REAL_2_C) -#define nh5awrite_real_3_c H5_FC_FUNC_(h5awrite_real_3_c, H5AWRITE_REAL_3_C) -#define nh5awrite_real_4_c H5_FC_FUNC_(h5awrite_real_4_c, H5AWRITE_REAL_4_C) -#define nh5awrite_real_5_c H5_FC_FUNC_(h5awrite_real_5_c, H5AWRITE_REAL_5_C) -#define nh5awrite_real_6_c H5_FC_FUNC_(h5awrite_real_6_c, H5AWRITE_REAL_6_C) -#define nh5awrite_real_7_c H5_FC_FUNC_(h5awrite_real_7_c, H5AWRITE_REAL_7_C) -#define nh5awrite_double_s_c H5_FC_FUNC_(h5awrite_double_s_c, H5AWRITE_DOUBLE_S_C) -#define nh5awrite_double_1_c H5_FC_FUNC_(h5awrite_double_1_c, H5AWRITE_DOUBLE_1_C) -#define nh5awrite_double_2_c H5_FC_FUNC_(h5awrite_double_2_c, H5AWRITE_DOUBLE_2_C) -#define nh5awrite_double_3_c H5_FC_FUNC_(h5awrite_double_3_c, H5AWRITE_DOUBLE_3_C) -#define nh5awrite_double_4_c H5_FC_FUNC_(h5awrite_double_4_c, H5AWRITE_DOUBLE_4_C) -#define nh5awrite_double_5_c H5_FC_FUNC_(h5awrite_double_5_c, H5AWRITE_DOUBLE_5_C) -#define nh5awrite_double_6_c H5_FC_FUNC_(h5awrite_double_6_c, H5AWRITE_DOUBLE_6_C) -#define nh5awrite_double_7_c H5_FC_FUNC_(h5awrite_double_7_c, H5AWRITE_DOUBLE_7_C) -#define nh5awritec_c H5_FC_FUNC_(h5awritec_c, H5AWRITEC_C) -#define nh5awritec_s_c H5_FC_FUNC_(h5awritec_s_c, H5AWRITEC_S_C) -#define nh5awritec_1_c H5_FC_FUNC_(h5awritec_1_c, H5AWRITEC_1_C) -#define nh5awritec_2_c H5_FC_FUNC_(h5awritec_2_c, H5AWRITEC_2_C) -#define nh5awritec_3_c H5_FC_FUNC_(h5awritec_3_c, H5AWRITEC_3_C) -#define nh5awritec_4_c H5_FC_FUNC_(h5awritec_4_c, H5AWRITEC_4_C) -#define nh5awritec_5_c H5_FC_FUNC_(h5awritec_5_c, H5AWRITEC_5_C) -#define nh5awritec_6_c H5_FC_FUNC_(h5awritec_6_c, H5AWRITEC_6_C) -#define nh5awritec_7_c H5_FC_FUNC_(h5awritec_7_c, H5AWRITEC_7_C) -#define nh5aread_c H5_FC_FUNC_(h5aread_c, H5AREAD_C) -#define nh5aread_integer_s_c H5_FC_FUNC_(h5aread_integer_s_c, H5AREAD_INTEGER_S_C) -#define nh5aread_integer_1_c H5_FC_FUNC_(h5aread_integer_1_c, H5AREAD_INTEGER_1_C) -#define nh5aread_integer_2_c H5_FC_FUNC_(h5aread_integer_2_c, H5AREAD_INTEGER_2_C) -#define nh5aread_integer_3_c H5_FC_FUNC_(h5aread_integer_3_c, H5AREAD_INTEGER_3_C) -#define nh5aread_integer_4_c H5_FC_FUNC_(h5aread_integer_4_c, H5AREAD_INTEGER_4_C) -#define nh5aread_integer_5_c H5_FC_FUNC_(h5aread_integer_5_c, H5AREAD_INTEGER_5_C) -#define nh5aread_integer_6_c H5_FC_FUNC_(h5aread_integer_6_c, H5AREAD_INTEGER_6_C) -#define nh5aread_integer_7_c H5_FC_FUNC_(h5aread_integer_7_c, H5AREAD_INTEGER_7_C) -#define nh5aread_real_s_c H5_FC_FUNC_(h5aread_real_s_c, H5AREAD_REAL_S_C) -#define nh5aread_real_1_c H5_FC_FUNC_(h5aread_real_1_c, H5AREAD_REAL_1_C) -#define nh5aread_real_2_c H5_FC_FUNC_(h5aread_real_2_c, H5AREAD_REAL_2_C) -#define nh5aread_real_3_c H5_FC_FUNC_(h5aread_real_3_c, H5AREAD_REAL_3_C) -#define nh5aread_real_4_c H5_FC_FUNC_(h5aread_real_4_c, H5AREAD_REAL_4_C) -#define nh5aread_real_5_c H5_FC_FUNC_(h5aread_real_5_c, H5AREAD_REAL_5_C) -#define nh5aread_real_6_c H5_FC_FUNC_(h5aread_real_6_c, H5AREAD_REAL_6_C) -#define nh5aread_real_7_c H5_FC_FUNC_(h5aread_real_7_c, H5AREAD_REAL_7_C) -#define nh5aread_double_s_c H5_FC_FUNC_(h5aread_double_s_c, H5AREAD_DOUBLE_S_C) -#define nh5aread_double_1_c H5_FC_FUNC_(h5aread_double_1_c, H5AREAD_DOUBLE_1_C) -#define nh5aread_double_2_c H5_FC_FUNC_(h5aread_double_2_c, H5AREAD_DOUBLE_2_C) -#define nh5aread_double_3_c H5_FC_FUNC_(h5aread_double_3_c, H5AREAD_DOUBLE_3_C) -#define nh5aread_double_4_c H5_FC_FUNC_(h5aread_double_4_c, H5AREAD_DOUBLE_4_C) -#define nh5aread_double_5_c H5_FC_FUNC_(h5aread_double_5_c, H5AREAD_DOUBLE_5_C) -#define nh5aread_double_6_c H5_FC_FUNC_(h5aread_double_6_c, H5AREAD_DOUBLE_6_C) -#define nh5aread_double_7_c H5_FC_FUNC_(h5aread_double_7_c, H5AREAD_DOUBLE_7_C) -#define nh5areadc_c H5_FC_FUNC_(h5areadc_c, H5AREADC_C) -#define nh5areadc_s_c H5_FC_FUNC_(h5areadc_s_c, H5AREADC_S_C) -#define nh5areadc_1_c H5_FC_FUNC_(h5areadc_1_c, H5AREADC_1_C) -#define nh5areadc_2_c H5_FC_FUNC_(h5areadc_2_c, H5AREADC_2_C) -#define nh5areadc_3_c H5_FC_FUNC_(h5areadc_3_c, H5AREADC_3_C) -#define nh5areadc_4_c H5_FC_FUNC_(h5areadc_4_c, H5AREADC_4_C) -#define nh5areadc_5_c H5_FC_FUNC_(h5areadc_5_c, H5AREADC_5_C) -#define nh5areadc_6_c H5_FC_FUNC_(h5areadc_6_c, H5AREADC_6_C) -#define nh5areadc_7_c H5_FC_FUNC_(h5areadc_7_c, H5AREADC_7_C) -#define nh5aget_name_c H5_FC_FUNC_(h5aget_name_c, H5AGET_NAME_C) -#define nh5aopen_idx_c H5_FC_FUNC_(h5aopen_idx_c, H5AOPEN_IDX_C) -#define nh5aget_space_c H5_FC_FUNC_(h5aget_space_c, H5AGET_SPACE_C) -#define nh5aget_type_c H5_FC_FUNC_(h5aget_type_c, H5AGET_TYPE_C) -#define nh5aget_num_attrs_c H5_FC_FUNC_(h5aget_num_attrs_c, H5AGET_NUM_ATTRS_C) -#define nh5adelete_c H5_FC_FUNC_(h5adelete_c, H5ADELETE_C) -#define nh5aget_storage_size_c H5_FC_FUNC_(h5aget_storage_size_c, H5AGET_STORAGE_SIZE_C) -#define nh5arename_by_name_c H5_FC_FUNC_(h5arename_by_name_c, H5ARENAME_BY_NAME_C) -#define nh5aopen_c H5_FC_FUNC_(h5aopen_c, H5AOPEN_C) -#define nh5adelete_by_name_c H5_FC_FUNC_(h5adelete_by_name_c,H5ADELETE_BY_NAME_C) -#define nh5adelete_by_idx_c H5_FC_FUNC_(h5adelete_by_idx_c,H5ADELETE_BY_IDX_C) -#define nh5aget_name_by_idx_c H5_FC_FUNC_(h5aget_name_by_idx_c,H5AGET_NAME_BY_IDX_C) -#define nh5aget_create_plist_c H5_FC_FUNC_(h5aget_create_plist_c,H5AGET_CREATE_PLIST_C) -#define nh5aopen_by_idx_c H5_FC_FUNC_(h5aopen_by_idx_c,H5AOPEN_BY_IDX_C) -#define nh5aget_info_c H5_FC_FUNC_(h5aget_info_c,H5AGET_INFO_C) -#define nh5aget_info_by_idx_c H5_FC_FUNC_(h5aget_info_by_idx_c,H5AGET_INFO_BY_IDX_C) -#define nh5aget_info_by_name_c H5_FC_FUNC_(h5aget_info_by_name_c,H5AGET_INFO_BY_NAME_C) -#define nh5aget_info_by_name_c H5_FC_FUNC_(h5aget_info_by_name_c,H5AGET_INFO_BY_NAME_C) -#define nh5acreate_by_name_c H5_FC_FUNC_(h5acreate_by_name_c,H5ACREATE_BY_NAME_C) -#define nh5aexists_c H5_FC_FUNC_(h5aexists_c,H5AEXISTS_C) -#define nh5aexists_by_name_c H5_FC_FUNC_(h5aexists_by_name_c,H5AEXISTS_BY_NAME_C) -#define nh5aopen_by_name_c H5_FC_FUNC_(h5aopen_by_name_c,H5AOPEN_BY_NAME_C) -#define nh5arename_c H5_FC_FUNC_(h5arename_c,H5ARENAME_C) -H5_FCDLL int_f nh5acreate_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *crt_prp, hid_t_f *aapl, hid_t_f *attr_id); -H5_FCDLL int_f nh5aopen_name_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_id); -H5_FCDLL int_f nh5awritec_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awritec_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5awrite_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_integer_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_real_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5awrite_double_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f h5awrite_f_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf); -H5_FCDLL int_f nh5areadc_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5areadc_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, _fcd buf, void *dims); -H5_FCDLL int_f nh5aread_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_integer_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_real_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_s_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_1_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_2_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_3_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_4_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_5_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_6_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f nh5aread_double_7_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf, void *dims); -H5_FCDLL int_f h5aread_f_c (hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf); -H5_FCDLL int_f nh5aclose_c ( hid_t_f *attr_id ); -H5_FCDLL int_f nh5adelete_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen); -H5_FCDLL int_f nh5aopen_idx_c (hid_t_f *obj_id, int_f *idx, hid_t_f *attr_id); -H5_FCDLL int_f nh5aget_space_c (hid_t_f *attr_id, hid_t_f *space_id); -H5_FCDLL int_f nh5aget_type_c (hid_t_f *attr_id, hid_t_f *type_id); -H5_FCDLL int_f nh5aget_num_attrs_c (hid_t_f *obj_id, int_f *attr_num); -H5_FCDLL int_f nh5aget_name_c(hid_t_f *attr_id, size_t_f *size, _fcd buf); -H5_FCDLL int_f nh5aget_storage_size_c ( hid_t_f *attr_id, hsize_t_f *size ); -H5_FCDLL int_f nh5arename_by_name_c ( hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5awrite_f_c(hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf); +H5_FCDLL int_f h5aread_f_c(hid_t_f *attr_id, hid_t_f *mem_type_id, void *buf); +H5_FCDLL int_f h5adelete_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen); +H5_FCDLL int_f h5aget_num_attrs_c(hid_t_f *obj_id, int_f *attr_num); +H5_FCDLL int_f h5aget_name_c(hid_t_f *attr_id, size_t_f *size, _fcd buf); +H5_FCDLL int_f h5arename_by_name_c( hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd old_attr_name, size_t_f *old_attr_namelen, _fcd new_attr_name, size_t_f *new_attr_namelen, hid_t_f *lapl_id ); -H5_FCDLL int_f nh5aopen_c ( hid_t_f *obj_id, _fcd attr_name, size_t_f *attr_namelen, +H5_FCDLL int_f h5aopen_c( hid_t_f *obj_id, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *aapl_id, hid_t_f *attr_id); -H5_FCDLL int_f nh5adelete_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5adelete_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id); -H5_FCDLL int_f nh5adelete_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5adelete_by_idx_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id); -H5_FCDLL int_f nh5aget_name_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5aget_name_by_idx_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, _fcd name, size_t_f *size, hid_t_f *lapl_id); -H5_FCDLL int_f nh5aget_create_plist_c ( hid_t_f *attr_id, hid_t_f *creation_prop_id ); -H5_FCDLL int_f nh5aopen_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5aopen_by_idx_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id); -H5_FCDLL int_f nh5aget_info_c (hid_t_f *loc_id, int_f *corder_valid, int_f *corder, +H5_FCDLL int_f h5aget_info_c(hid_t_f *loc_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ); -H5_FCDLL int_f nh5aget_info_by_idx_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5aget_info_by_idx_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, int_f *idx_type, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ); -H5_FCDLL int_f nh5aget_info_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5aget_info_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id, int_f *corder_valid, int_f *corder, int_f *cset, hsize_t_f *data_size ); -H5_FCDLL int_f nh5acreate_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5acreate_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *type_id, hid_t_f *space_id, hid_t_f *acpl_id, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id ); -H5_FCDLL int_f nh5aexists_c (hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_exists); -H5_FCDLL int_f nh5aexists_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, +H5_FCDLL int_f h5aexists_c(hid_t_f *obj_id, _fcd name, size_t_f *namelen, hid_t_f *attr_exists); +H5_FCDLL int_f h5aexists_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *lapl_id, int_f *attr_exists); -H5_FCDLL int_f nh5aopen_by_name_c (hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, +H5_FCDLL int_f h5aopen_by_name_c(hid_t_f *loc_id, _fcd obj_name, size_t_f *obj_namelen, _fcd attr_name, size_t_f *attr_namelen, hid_t_f *aapl_id, hid_t_f *lapl_id, hid_t_f *attr_id); -H5_FCDLL int_f nh5arename_c( hid_t_f *loc_id, +H5_FCDLL int_f h5arename_c( hid_t_f *loc_id, _fcd old_attr_name, size_t_f *old_attr_namelen, _fcd new_attr_name, size_t_f *new_attr_namelen); /* * Functions form H5Tf.c file */ -#define nh5topen_c H5_FC_FUNC_(h5topen_c, H5TOPEN_C) -#define nh5tcommit_c H5_FC_FUNC_(h5tcommit_c, H5TCOMMIT_C) -#define nh5tcommitted_c H5_FC_FUNC_(h5tcommitted_c, H5TCOMMITTED_C) -#define nh5tclose_c H5_FC_FUNC_(h5tclose_c, H5TCLOSE_C) -#define nh5tcopy_c H5_FC_FUNC_(h5tcopy_c, H5TCOPY_C) -#define nh5tequal_c H5_FC_FUNC_(h5tequal_c, H5TEQUAL_C) -#define nh5tget_class_c H5_FC_FUNC_(h5tget_class_c, H5TGET_CLASS_C) -#define nh5tget_order_c H5_FC_FUNC_(h5tget_order_c, H5TGET_ORDER_C) -#define nh5tset_order_c H5_FC_FUNC_(h5tset_order_c, H5TSET_ORDER_C) -#define nh5tget_size_c H5_FC_FUNC_(h5tget_size_c, H5TGET_SIZE_C) -#define nh5tset_size_c H5_FC_FUNC_(h5tset_size_c, H5TSET_SIZE_C) -#define nh5tget_precision_c H5_FC_FUNC_(h5tget_precision_c, H5TGET_PRECISION_C) -#define nh5tset_precision_c H5_FC_FUNC_(h5tset_precision_c, H5TSET_PRECISION_C) -#define nh5tget_offset_c H5_FC_FUNC_(h5tget_offset_c, H5TGET_OFFSET_C) -#define nh5tset_offset_c H5_FC_FUNC_(h5tset_offset_c, H5TSET_OFFSET_C) -#define nh5tget_pad_c H5_FC_FUNC_(h5tget_pad_c, H5TGET_PAD_C) -#define nh5tset_pad_c H5_FC_FUNC_(h5tset_pad_c, H5TSET_PAD_C) -#define nh5tget_sign_c H5_FC_FUNC_(h5tget_sign_c, H5TGET_SIGN_C) -#define nh5tset_sign_c H5_FC_FUNC_(h5tset_sign_c, H5TSET_SIGN_C) -#define nh5tget_fields_c H5_FC_FUNC_(h5tget_fields_c, H5TGET_FIELDS_C) -#define nh5tset_fields_c H5_FC_FUNC_(h5tset_fields_c, H5TSET_FIELDS_C) -#define nh5tget_ebias_c H5_FC_FUNC_(h5tget_ebias_c, H5TGET_EBIAS_C) -#define nh5tset_ebias_c H5_FC_FUNC_(h5tset_ebias_c, H5TSET_EBIAS_C) -#define nh5tget_norm_c H5_FC_FUNC_(h5tget_norm_c, H5TGET_NORM_C) -#define nh5tset_norm_c H5_FC_FUNC_(h5tset_norm_c, H5TSET_NORM_C) -#define nh5tget_inpad_c H5_FC_FUNC_(h5tget_inpad_c, H5TGET_INPAD_C) -#define nh5tset_inpad_c H5_FC_FUNC_(h5tset_inpad_c, H5TSET_INPAD_C) -#define nh5tget_cset_c H5_FC_FUNC_(h5tget_cset_c, H5TGET_CSET_C) -#define nh5tset_cset_c H5_FC_FUNC_(h5tset_cset_c, H5TSET_CSET_C) -#define nh5tget_strpad_c H5_FC_FUNC_(h5tget_strpad_c, H5TGET_STRPAD_C) -#define nh5tset_strpad_c H5_FC_FUNC_(h5tset_strpad_c, H5TSET_STRPAD_C) -#define nh5tget_nmembers_c H5_FC_FUNC_(h5tget_nmembers_c, H5TGET_NMEMBERS_C) -#define nh5tget_member_name_c H5_FC_FUNC_(h5tget_member_name_c, H5TGET_MEMBER_NAME_C) -#define nh5tget_member_offset_c H5_FC_FUNC_(h5tget_member_offset_c, H5TGET_MEMBER_OFFSET_C) -#define nh5tget_member_dims_c H5_FC_FUNC_(h5tget_member_dims_c, H5TGET_MEMBER_DIMS_C) -#define nh5tget_member_type_c H5_FC_FUNC_(h5tget_member_type_c, H5TGET_MEMBER_TYPE_C) -#define nh5tget_member_index_c H5_FC_FUNC_(h5tget_member_index_c, H5TGET_MEMBER_INDEX_C) -#define nh5tinsert_c H5_FC_FUNC_(h5tinsert_c, H5TINSERT_C) -#define nh5tcreate_c H5_FC_FUNC_(h5tcreate_c, H5TCREATE_C) -#define nh5tpack_c H5_FC_FUNC_(h5tpack_c, H5TPACK_C) -#define nh5tinsert_array_c H5_FC_FUNC_(h5tinsert_array_c, H5TINSERT_ARRAY_C) -#define nh5tinsert_array_c2 H5_FC_FUNC_(h5tinsert_array_c2, H5TINSERT_ARRAY_C2) -#define nh5tenum_create_c H5_FC_FUNC_(h5tenum_create_c, H5TENUM_CREATE_C) -#define nh5tenum_insert_c H5_FC_FUNC_(h5tenum_insert_c, H5TENUM_INSERT_C) -#define nh5tenum_nameof_c H5_FC_FUNC_(h5tenum_nameof_c, H5TENUM_NAMEOF_C) -#define nh5tenum_valueof_c H5_FC_FUNC_(h5tenum_valueof_c, H5TENUM_VALUEOF_C) -#define nh5tget_member_value_c H5_FC_FUNC_(h5tget_member_value_c, H5TGET_MEMBER_VALUE_C) -#define nh5tset_tag_c H5_FC_FUNC_(h5tset_tag_c, H5TSET_TAG_C) -#define nh5tget_tag_c H5_FC_FUNC_(h5tget_tag_c, H5TGET_TAG_C) -#define nh5tarray_create_c H5_FC_FUNC_(h5tarray_create_c, H5TARRAY_CREATE_C) -#define nh5tget_array_ndims_c H5_FC_FUNC_(h5tget_array_ndims_c, H5TGET_ARRAY_NDIMS_C) -#define nh5tget_array_dims_c H5_FC_FUNC_(h5tget_array_dims_c, H5TGET_ARRAY_DIMS_C) -#define nh5tget_super_c H5_FC_FUNC_(h5tget_super_c, H5TGET_SUPER_C) -#define nh5tvlen_create_c H5_FC_FUNC_(h5tvlen_create_c, H5TVLEN_CREATE_C) -#define nh5tis_variable_str_c H5_FC_FUNC_(h5tis_variable_str_c, H5TIS_VARIABLE_STR_C) -#define nh5tget_member_class_c H5_FC_FUNC_(h5tget_member_class_c, H5TGET_MEMBER_CLASS_C) -#define nh5tcommit_anon_c H5_FC_FUNC_(h5tcommit_anon_c, H5TCOMMIT_ANON_C) -#define nh5tdecode_c H5_FC_FUNC_(h5tdecode_c, H5TDECODE_C) -#define nh5tencode_c H5_FC_FUNC_(h5tencode_c, H5TENCODE_C) -#define nh5tget_create_plist_c H5_FC_FUNC_(h5tget_create_plist_c, H5TGET_CREATE_PLIST_C) -#define nh5tcompiler_conv_c H5_FC_FUNC_(h5tcompiler_conv_c, H5TCOMPILER_CONV_C) -#define nh5tget_native_type_c H5_FC_FUNC_(h5tget_native_type_c, H5TGET_NATIVE_TYPE_C ) -H5_FCDLL int_f nh5tcreate_c(int_f *cls, size_t_f *size, hid_t_f *type_id); -H5_FCDLL int_f nh5topen_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *tapl_id ); -H5_FCDLL int_f nh5tcommit_c (hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *lcpl_id, hid_t_f *tcpl_id, hid_t_f *tapl_id); -H5_FCDLL int_f nh5tclose_c ( hid_t_f *type_id ); -H5_FCDLL int_f nh5tequal_c ( hid_t_f *type1_id , hid_t_f *type2_id, int_f *c_flag); -H5_FCDLL int_f nh5tcopy_c ( hid_t_f *type_id , hid_t_f *new_type_id); -H5_FCDLL int_f nh5tget_class_c ( hid_t_f *type_id , int_f *classtype); -H5_FCDLL int_f nh5tget_order_c ( hid_t_f *type_id , int_f *order); -H5_FCDLL int_f nh5tset_order_c ( hid_t_f *type_id , int_f *order); -H5_FCDLL int_f nh5tget_size_c ( hid_t_f *type_id , size_t_f *size); -H5_FCDLL int_f nh5tset_size_c ( hid_t_f *type_id , size_t_f *size); -H5_FCDLL int_f nh5tcommitted_c (hid_t_f *dtype_id); -H5_FCDLL int_f nh5tget_precision_c ( hid_t_f *type_id , size_t_f *precision); -H5_FCDLL int_f nh5tset_precision_c ( hid_t_f *type_id , size_t_f *precision); -H5_FCDLL int_f nh5tget_offset_c ( hid_t_f *type_id , size_t_f *offset); -H5_FCDLL int_f nh5tset_offset_c ( hid_t_f *type_id , size_t_f *offset); -H5_FCDLL int_f nh5tget_pad_c ( hid_t_f *type_id , int_f * lsbpad, int_f * msbpad); -H5_FCDLL int_f nh5tset_pad_c ( hid_t_f *type_id, int_f * lsbpad, int_f * msbpad ); -H5_FCDLL int_f nh5tget_sign_c ( hid_t_f *type_id , int_f* sign); -H5_FCDLL int_f nh5tset_sign_c ( hid_t_f *type_id , int_f *sign); -H5_FCDLL int_f nh5tget_fields_c ( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize); -H5_FCDLL int_f nh5tset_fields_c ( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize); -H5_FCDLL int_f nh5tget_ebias_c ( hid_t_f *type_id , size_t_f *ebias); -H5_FCDLL int_f nh5tset_ebias_c ( hid_t_f *type_id , size_t_f *ebias); -H5_FCDLL int_f nh5tget_norm_c ( hid_t_f *type_id , int_f *norm); -H5_FCDLL int_f nh5tset_norm_c ( hid_t_f *type_id , int_f *norm); -H5_FCDLL int_f nh5tget_inpad_c ( hid_t_f *type_id, int_f * padtype); -H5_FCDLL int_f nh5tset_inpad_c ( hid_t_f *type_id, int_f * padtype); -H5_FCDLL int_f nh5tget_cset_c ( hid_t_f *type_id, int_f * cset); -H5_FCDLL int_f nh5tset_cset_c ( hid_t_f *type_id, int_f * cset); -H5_FCDLL int_f nh5tget_strpad_c ( hid_t_f *type_id, int_f * strpad); -H5_FCDLL int_f nh5tset_strpad_c ( hid_t_f *type_id, int_f * strpad); -H5_FCDLL int_f nh5tget_nmembers_c ( hid_t_f *type_id , int_f * num_members); -H5_FCDLL int_f nh5tget_member_name_c ( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *namelen); -H5_FCDLL int_f nh5tget_member_dims_c ( hid_t_f *type_id ,int_f* field_idx, int_f * dims, size_t_f * field_dims, int_f * perm ); -H5_FCDLL int_f nh5tget_member_offset_c ( hid_t_f *type_id ,int_f* member_no, size_t_f* offset); -H5_FCDLL int_f nh5tget_member_type_c ( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype); -H5_FCDLL int_f nh5tget_member_index_c ( hid_t_f *type_id ,_fcd name, int_f* namelen, int_f *idx); -H5_FCDLL int_f nh5tinsert_c(hid_t_f *type_id, _fcd name, int_f* namelen, size_t_f *offset, hid_t_f * field_id); -H5_FCDLL int_f nh5tpack_c(hid_t_f * type_id); -H5_FCDLL int_f nh5tinsert_array_c(hid_t_f * parent_id, _fcd name, int_f* namelen, size_t_f* offset, int_f* ndims, size_t_f* dims, hid_t_f* member_id, int_f* perm ); -H5_FCDLL int_f nh5tinsert_array_c2(hid_t_f * parent_id, _fcd name, int_f* namelen, size_t_f* offset, int_f* ndims, size_t_f* dims, hid_t_f* member_id); -H5_FCDLL int_f nh5tenum_create_c ( hid_t_f *parent_id , hid_t_f *new_type_id); -H5_FCDLL int_f nh5tenum_insert_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value); +H5_FCDLL int_f h5tcreate_c(int_f *cls, size_t_f *size, hid_t_f *type_id); +H5_FCDLL int_f h5topen_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *tapl_id ); +H5_FCDLL int_f h5tcommit_c(hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *type_id, hid_t_f *lcpl_id, hid_t_f *tcpl_id, hid_t_f *tapl_id); +H5_FCDLL int_f h5tclose_c( hid_t_f *type_id ); +H5_FCDLL int_f h5tequal_c( hid_t_f *type1_id , hid_t_f *type2_id, int_f *c_flag); +H5_FCDLL int_f h5tcopy_c( hid_t_f *type_id , hid_t_f *new_type_id); +H5_FCDLL int_f h5tget_class_c( hid_t_f *type_id , int_f *classtype); +H5_FCDLL int_f h5tget_order_c( hid_t_f *type_id , int_f *order); +H5_FCDLL int_f h5tset_order_c( hid_t_f *type_id , int_f *order); +H5_FCDLL int_f h5tget_size_c( hid_t_f *type_id , size_t_f *size); +H5_FCDLL int_f h5tset_size_c( hid_t_f *type_id , size_t_f *size); +H5_FCDLL int_f h5tcommitted_c(hid_t_f *dtype_id); +H5_FCDLL int_f h5tget_precision_c( hid_t_f *type_id , size_t_f *precision); +H5_FCDLL int_f h5tset_precision_c( hid_t_f *type_id , size_t_f *precision); +H5_FCDLL int_f h5tget_offset_c( hid_t_f *type_id , size_t_f *offset); +H5_FCDLL int_f h5tset_offset_c( hid_t_f *type_id , size_t_f *offset); +H5_FCDLL int_f h5tget_pad_c( hid_t_f *type_id , int_f * lsbpad, int_f * msbpad); +H5_FCDLL int_f h5tset_pad_c( hid_t_f *type_id, int_f * lsbpad, int_f * msbpad ); +H5_FCDLL int_f h5tget_sign_c( hid_t_f *type_id , int_f* sign); +H5_FCDLL int_f h5tset_sign_c( hid_t_f *type_id , int_f *sign); +H5_FCDLL int_f h5tget_fields_c( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize); +H5_FCDLL int_f h5tset_fields_c( hid_t_f *type_id, size_t_f *spos, size_t_f *epos, size_t_f* esize, size_t_f* mpos, size_t_f* msize); +H5_FCDLL int_f h5tget_ebias_c( hid_t_f *type_id , size_t_f *ebias); +H5_FCDLL int_f h5tset_ebias_c( hid_t_f *type_id , size_t_f *ebias); +H5_FCDLL int_f h5tget_norm_c( hid_t_f *type_id , int_f *norm); +H5_FCDLL int_f h5tset_norm_c( hid_t_f *type_id , int_f *norm); +H5_FCDLL int_f h5tget_inpad_c( hid_t_f *type_id, int_f * padtype); +H5_FCDLL int_f h5tset_inpad_c( hid_t_f *type_id, int_f * padtype); +H5_FCDLL int_f h5tget_cset_c( hid_t_f *type_id, int_f * cset); +H5_FCDLL int_f h5tset_cset_c( hid_t_f *type_id, int_f * cset); +H5_FCDLL int_f h5tget_strpad_c( hid_t_f *type_id, int_f * strpad); +H5_FCDLL int_f h5tset_strpad_c( hid_t_f *type_id, int_f * strpad); +H5_FCDLL int_f h5tget_nmembers_c( hid_t_f *type_id , int_f * num_members); +H5_FCDLL int_f h5tget_member_name_c( hid_t_f *type_id ,int_f* idx, _fcd member_name, int_f *namelen); +H5_FCDLL int_f h5tget_member_dims_c( hid_t_f *type_id ,int_f* field_idx, int_f * dims, size_t_f * field_dims, int_f * perm ); +H5_FCDLL int_f h5tget_member_offset_c( hid_t_f *type_id ,int_f* member_no, size_t_f* offset); +H5_FCDLL int_f h5tget_member_type_c( hid_t_f *type_id ,int_f* field_idx, hid_t_f * datatype); +H5_FCDLL int_f h5tget_member_index_c( hid_t_f *type_id ,_fcd name, int_f* namelen, int_f *idx); +H5_FCDLL int_f h5tinsert_c(hid_t_f *type_id, _fcd name, int_f* namelen, size_t_f *offset, hid_t_f * field_id); +H5_FCDLL int_f h5tpack_c(hid_t_f * type_id); +H5_FCDLL int_f h5tinsert_array_c(hid_t_f * parent_id, _fcd name, int_f* namelen, size_t_f* offset, int_f* ndims, size_t_f* dims, hid_t_f* member_id, int_f* perm ); +H5_FCDLL int_f h5tinsert_array_c2(hid_t_f * parent_id, _fcd name, int_f* namelen, size_t_f* offset, int_f* ndims, size_t_f* dims, hid_t_f* member_id); +H5_FCDLL int_f h5tenum_create_c( hid_t_f *parent_id , hid_t_f *new_type_id); +H5_FCDLL int_f h5tenum_insert_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value); H5_FCDLL int_f h5tenum_insert_ptr_c(hid_t_f *type_id, _fcd name, int_f* namelen, void *value); -H5_FCDLL int_f nh5tenum_nameof_c(hid_t_f *type_id, int_f* value, _fcd name, size_t_f* namelen); -H5_FCDLL int_f nh5tenum_valueof_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value); -H5_FCDLL int_f nh5tget_member_value_c(hid_t_f *type_id, int_f* member_no, int_f* value); -H5_FCDLL int_f nh5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen); -H5_FCDLL int_f nh5tget_tag_c(hid_t_f* type_id, _fcd tag, size_t_f* tag_size, int_f* namelen); -H5_FCDLL int_f nh5tarray_create_c(hid_t_f * base_id, int_f *rank, hsize_t_f* dims, hid_t_f* type_id); -H5_FCDLL int_f nh5tget_array_dims_c ( hid_t_f *type_id , hsize_t_f * dims); -H5_FCDLL int_f nh5tget_array_ndims_c ( hid_t_f *type_id , int_f * ndims); -H5_FCDLL int_f nh5tget_super_c ( hid_t_f *type_id , hid_t_f *base_type_id); -H5_FCDLL int_f nh5tvlen_create_c ( hid_t_f *type_id , hid_t_f *vltype_id); -H5_FCDLL int_f nh5tis_variable_str_c ( hid_t_f *type_id , int_f *flag ); -H5_FCDLL int_f nh5tget_member_class_c ( hid_t_f *type_id , int_f *member_no, int_f *cls ); -H5_FCDLL int_f nh5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, hid_t_f *tcpl_id, hid_t_f *tapl_id); -H5_FCDLL int_f nh5tdecode_c ( _fcd buf, hid_t_f *obj_id ); -H5_FCDLL int_f nh5tencode_c (_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ); -H5_FCDLL int_f nh5tget_create_plist_c ( hid_t_f *dtype_id, hid_t_f *dtpl_id); -H5_FCDLL int_f nh5tcompiler_conv_c ( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag); -H5_FCDLL int_f nh5tget_native_type_c(hid_t_f *dtype_id, int_f *direction, hid_t_f *native_dtype_id); +H5_FCDLL int_f h5tenum_nameof_c(hid_t_f *type_id, int_f* value, _fcd name, size_t_f* namelen); +H5_FCDLL int_f h5tenum_valueof_c(hid_t_f *type_id, _fcd name, int_f* namelen, int_f* value); +H5_FCDLL int_f h5tget_member_value_c(hid_t_f *type_id, int_f* member_no, int_f* value); +H5_FCDLL int_f h5tset_tag_c(hid_t_f* type_id, _fcd tag, int_f* namelen); +H5_FCDLL int_f h5tget_tag_c(hid_t_f* type_id, _fcd tag, size_t_f* tag_size, int_f* namelen); +H5_FCDLL int_f h5tarray_create_c(hid_t_f * base_id, int_f *rank, hsize_t_f* dims, hid_t_f* type_id); +H5_FCDLL int_f h5tget_array_dims_c( hid_t_f *type_id , hsize_t_f * dims); +H5_FCDLL int_f h5tget_array_ndims_c( hid_t_f *type_id , int_f * ndims); +H5_FCDLL int_f h5tget_super_c( hid_t_f *type_id , hid_t_f *base_type_id); +H5_FCDLL int_f h5tvlen_create_c( hid_t_f *type_id , hid_t_f *vltype_id); +H5_FCDLL int_f h5tis_variable_str_c( hid_t_f *type_id , int_f *flag ); +H5_FCDLL int_f h5tget_member_class_c( hid_t_f *type_id , int_f *member_no, int_f *cls ); +H5_FCDLL int_f h5tcommit_anon_c(hid_t_f *loc_id, hid_t_f *dtype_id, hid_t_f *tcpl_id, hid_t_f *tapl_id); +H5_FCDLL int_f h5tdecode_c( _fcd buf, hid_t_f *obj_id ); +H5_FCDLL int_f h5tencode_c(_fcd buf, hid_t_f *obj_id, size_t_f *nalloc ); +H5_FCDLL int_f h5tget_create_plist_c( hid_t_f *dtype_id, hid_t_f *dtpl_id); +H5_FCDLL int_f h5tcompiler_conv_c( hid_t_f *src_id, hid_t_f *dst_id, int_f *c_flag); +H5_FCDLL int_f h5tget_native_type_c(hid_t_f *dtype_id, int_f *direction, hid_t_f *native_dtype_id); H5_FCDLL int_f h5tconvert_c(hid_t_f *src_id, hid_t_f *dst_id, size_t_f *nelmts, void *buf, void *background, hid_t_f *plist_id); - /* * Functions from H5Of.c */ -#define nh5olink_c H5_FC_FUNC_(h5olink_c, H5OLINK_C) -#define nh5oopen_c H5_FC_FUNC_(h5oopen_c, H5OOPEN_C) -#define nh5oclose_c H5_FC_FUNC_(h5oclose_c, H5OCLOSE_C) -#define nh5oopen_by_addr_c H5_FC_FUNC_(h5oopen_by_addr_c, H5OOPEN_BY_ADDR_C) -#define nh5ocopy_c H5_FC_FUNC_(h5ocopy_c, H5OCOPY_C) -#define nh5odecr_refcount_c H5_FC_FUNC_(h5odecr_refcount_c, H5ODECR_REFCOUNT_C) -#define nh5oincr_refcount_c H5_FC_FUNC_(h5oincr_refcount_c, H5OINCR_REFCOUNT_C) -#define nh5oexists_by_name_c H5_FC_FUNC_(h5oexists_by_name_c, H5OEXISTS_BY_NAME_C) -#define nh5oset_comment_c H5_FC_FUNC_(h5oset_comment_c, H5OSET_COMMENT_C) -#define nh5oset_comment_by_name_c H5_FC_FUNC_(h5oset_comment_by_name_c, H5OSET_COMMENT_BY_NAME_C) -#define nh5oopen_by_idx_c H5_FC_FUNC_(h5oopen_by_idx_c, H5OOPEN_BY_IDX_C) -#define nh5oget_comment_c H5_FC_FUNC_(h5oget_comment_c, H5OGET_COMMENT_C) -#define nh5oget_comment_by_name_c H5_FC_FUNC_(h5oget_comment_by_name_c, H5OGET_COMMENT_BY_NAME_C) - -H5_FCDLL int_f nh5oopen_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid_t_f *obj_id); -H5_FCDLL int_f nh5oclose_c (hid_t_f *object_id ); -H5_FCDLL int_f nh5oopen_by_addr_c (hid_t_f *loc_id, haddr_t_f *addr, hid_t_f *obj_id); -H5_FCDLL int_f nh5olink_c (hid_t_f *object_id, hid_t_f *new_loc_id, _fcd name, size_t_f *namelen, +H5_FCDLL int_f h5oopen_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, hid_t_f *obj_id); +H5_FCDLL int_f h5oclose_c(hid_t_f *object_id ); +H5_FCDLL int_f h5oopen_by_addr_c(hid_t_f *loc_id, haddr_t_f *addr, hid_t_f *obj_id); +H5_FCDLL int_f h5olink_c(hid_t_f *object_id, hid_t_f *new_loc_id, _fcd name, size_t_f *namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id); -H5_FCDLL int_f h5ovisit_c (hid_t_f *group_id, int_f *index_type, int_f *order, H5O_iterate_t op, void *op_data); +H5_FCDLL int_f h5ovisit_c(hid_t_f *group_id, int_f *index_type, int_f *order, H5O_iterate_t op, void *op_data); H5_FCDLL int_f h5ovisit_by_name_c(hid_t_f *loc_id, _fcd object_name, size_t_f *namelen, int_f *index_type, int_f *order, H5O_iterate_t op, void *op_data, hid_t_f *lapl_id ); -H5_FCDLL int_f h5oget_info_c (hid_t_f *object_id, H5O_info_t_f *object_info); -H5_FCDLL int_f h5oget_info_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *namelen, +H5_FCDLL int_f h5oget_info_c(hid_t_f *object_id, H5O_info_t_f *object_info); +H5_FCDLL int_f h5oget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *namelen, int_f *index_field, int_f *order, hsize_t_f *n, hid_t_f *lapl_id, H5O_info_t_f *object_info); -H5_FCDLL int_f h5oget_info_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, +H5_FCDLL int_f h5oget_info_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, H5O_info_t_f *object_info); -H5_FCDLL int_f nh5ocopy_c (hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len, +H5_FCDLL int_f h5ocopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_name_len, hid_t_f *dst_loc_id, _fcd dst_name, size_t_f *dst_name_len, hid_t_f *ocpypl_id, hid_t_f *lcpl_id ); -H5_FCDLL int_f nh5odecr_refcount_c (hid_t_f *object_id); -H5_FCDLL int_f nh5oincr_refcount_c (hid_t_f *object_id); -H5_FCDLL int_f nh5oexists_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id); -H5_FCDLL int_f nh5oset_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentlen); -H5_FCDLL int_f nh5oset_comment_by_name_c (hid_t_f *object_id, _fcd name, size_t_f *namelen, _fcd comment, size_t_f *commentlen, hid_t_f *lapl_id); -H5_FCDLL int_f nh5oopen_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +H5_FCDLL int_f h5odecr_refcount_c(hid_t_f *object_id); +H5_FCDLL int_f h5oincr_refcount_c(hid_t_f *object_id); +H5_FCDLL int_f h5oexists_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id); +H5_FCDLL int_f h5oset_comment_c(hid_t_f *object_id, _fcd comment, size_t_f *commentlen); +H5_FCDLL int_f h5oset_comment_by_name_c(hid_t_f *object_id, _fcd name, size_t_f *namelen, _fcd comment, size_t_f *commentlen, hid_t_f *lapl_id); +H5_FCDLL int_f h5oopen_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_type, int_f *order, hsize_t_f *n, hid_t_f *obj_id, hid_t_f *lapl_id); -H5_FCDLL int_f nh5oget_comment_c (hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hssize_t_f *bufsize); -H5_FCDLL int_f nh5oget_comment_by_name_c (hid_t_f *loc_id, _fcd name, size_t_f *name_size, +H5_FCDLL int_f h5oget_comment_c(hid_t_f *object_id, _fcd comment, size_t_f *commentsize, hssize_t_f *bufsize); +H5_FCDLL int_f h5oget_comment_by_name_c(hid_t_f *loc_id, _fcd name, size_t_f *name_size, _fcd comment, size_t_f *commentsize, size_t_f *bufsize, hid_t_f *lapl_id); /* * Functions from H5Pf.c */ -#define nh5pcreate_c H5_FC_FUNC_(h5pcreate_c, H5PCREATE_C) -#define nh5pclose_c H5_FC_FUNC_(h5pclose_c, H5PCLOSE_C) -#define nh5pcopy_c H5_FC_FUNC_(h5pcopy_c, H5PCOPY_C) -#define nh5pcreate_class_f90_c H5_FC_FUNC_(h5pcreate_class_f90_c, H5PCREATE_CLASS_F90_C) -#define nh5pequal_c H5_FC_FUNC_(h5pequal_c, H5PEQUAL_C) -#define nh5pget_class_c H5_FC_FUNC_(h5pget_class_c, H5PGET_CLASS_C) -#define nh5pset_deflate_c H5_FC_FUNC_(h5pset_deflate_c, H5PSET_DEFLATE_C) -#define nh5pset_preserve_c H5_FC_FUNC_(h5pset_preserve_c, H5PSET_PRESERVE_C) -#define nh5pget_preserve_c H5_FC_FUNC_(h5pget_preserve_c, H5PGET_PRESERVE_C) -#define nh5pset_chunk_c H5_FC_FUNC_(h5pset_chunk_c, H5PSET_CHUNK_C) -#define nh5pget_chunk_c H5_FC_FUNC_(h5pget_chunk_c, H5PGET_CHUNK_C) -#define nh5pset_fill_valuec_c H5_FC_FUNC_(h5pset_fill_valuec_c, H5PSET_FILL_VALUEC_C) -#define nh5pset_fill_value_integer_c H5_FC_FUNC_(h5pset_fill_value_integer_c, H5PSET_FILL_VALUE_INTEGER_C) -#define nh5pset_fill_value_real_c H5_FC_FUNC_(h5pset_fill_value_real_c, H5PSET_FILL_VALUE_REAL_C) -#define nh5pset_fill_value_double_c H5_FC_FUNC_(h5pset_fill_value_double_c, H5PSET_FILL_VALUE_DOUBLE_C) -#define nh5pget_fill_valuec_c H5_FC_FUNC_(h5pget_fill_valuec_c, H5PGET_FILL_VALUEC_C) -#define nh5pget_fill_value_integer_c H5_FC_FUNC_(h5pget_fill_value_integer_c, H5PGET_FILL_VALUE_INTEGER_C) -#define nh5pget_fill_value_real_c H5_FC_FUNC_(h5pget_fill_value_real_c, H5PGET_FILL_VALUE_REAL_C) -#define nh5pget_fill_value_double_c H5_FC_FUNC_(h5pget_fill_value_double_c, H5PGET_FILL_VALUE_DOUBLE_C) -#define nh5pget_version_c H5_FC_FUNC_(h5pget_version_c, H5PGET_VERSION_C) -#define nh5pget_userblock_c H5_FC_FUNC_(h5pget_userblock_c, H5PGET_USERBLOCK_C) -#define nh5pset_userblock_c H5_FC_FUNC_(h5pset_userblock_c, H5PSET_USERBLOCK_C) -#define nh5pset_sizes_c H5_FC_FUNC_(h5pset_sizes_c, H5PSET_SIZES_C) -#define nh5pget_sizes_c H5_FC_FUNC_(h5pget_sizes_c, H5PGET_SIZES_C) -#define nh5pget_sym_k_c H5_FC_FUNC_(h5pget_sym_k_c, H5PGET_SYM_K_C) -#define nh5pset_sym_k_c H5_FC_FUNC_(h5pset_sym_k_c, H5PSET_SYM_K_C) -#define nh5pget_istore_k_c H5_FC_FUNC_(h5pget_istore_k_c, H5PGET_ISTORE_K_C) -#define nh5pset_istore_k_c H5_FC_FUNC_(h5pset_istore_k_c, H5PSET_ISTORE_K_C) -#define nh5pget_driver_c H5_FC_FUNC_(h5pget_driver_c, H5PGET_DRIVER_C) -#define nh5pset_fapl_stdio_c H5_FC_FUNC_(h5pset_fapl_stdio_c, H5PSET_FAPL_STDIO_C) -#define nh5pget_fapl_stdio_c H5_FC_FUNC_(h5pget_fapl_stdio_c, H5PGET_FAPL_STDIO_C) -#define nh5pset_fapl_sec2_c H5_FC_FUNC_(h5pset_fapl_sec2_c, H5PSET_FAPL_SEC2_C) -#define nh5pget_fapl_sec2_c H5_FC_FUNC_(h5pget_fapl_sec2_c, H5PGET_FAPL_SEC2_C) -#define nh5pset_alignment_c H5_FC_FUNC_(h5pset_alignment_c, H5PSET_ALIGNMENT_C) -#define nh5pget_alignment_c H5_FC_FUNC_(h5pget_alignment_c, H5PGET_ALIGNMENT_C) -#define nh5pset_fapl_core_c H5_FC_FUNC_(h5pset_fapl_core_c, H5PSET_FAPL_CORE_C) -#define nh5pget_fapl_core_c H5_FC_FUNC_(h5pget_fapl_core_c, H5PGET_FAPL_CORE_C) -#define nh5pset_fapl_family_c H5_FC_FUNC_(h5pset_fapl_family_c, H5PSET_FAPL_FAMILY_C) -#define nh5pget_fapl_family_c H5_FC_FUNC_(h5pget_fapl_family_c, H5PGET_FAPL_FAMILY_C) -#define nh5pset_cache_c H5_FC_FUNC_(h5pset_cache_c, H5PSET_CACHE_C) -#define nh5pget_cache_c H5_FC_FUNC_(h5pget_cache_c, H5PGET_CACHE_C) -#define nh5pset_fapl_split_c H5_FC_FUNC_(h5pset_fapl_split_c, H5PSET_FAPL_SPLIT_C) -#define nh5pget_fapl_split_c H5_FC_FUNC_(h5pget_fapl_split_c, H5PGET_FAPL_SPLIT_C) -#define nh5pset_gc_references_c H5_FC_FUNC_(h5pset_gc_references_c, H5PSET_GC_REFERENCES_C) -#define nh5pget_gc_references_c H5_FC_FUNC_(h5pget_gc_references_c, H5PGET_GC_REFERENCES_C) -#define nh5pset_layout_c H5_FC_FUNC_(h5pset_layout_c, H5PSET_LAYOUT_C) -#define nh5pget_layout_c H5_FC_FUNC_(h5pget_layout_c, H5PGET_LAYOUT_C) -#define nh5pset_filter_c H5_FC_FUNC_(h5pset_filter_c, H5PSET_FILTER_C) -#define nh5premove_filter_c H5_FC_FUNC_(h5premove_filter_c, H5PREMOVE_FILTER_C) -#define nh5pmodify_filter_c H5_FC_FUNC_(h5pmodify_filter_c, H5PMODIFY_FILTER_C) -#define nh5pget_nfilters_c H5_FC_FUNC_(h5pget_nfilters_c, H5PGET_NFILTERS_C) -#define nh5pget_filter_c H5_FC_FUNC_(h5pget_filter_c, H5PGET_FILTER_C) -#define nh5pget_filter_by_id_c H5_FC_FUNC_(h5pget_filter_by_id_c, H5PGET_FILTER_BY_ID_C) -#define nh5pset_external_c H5_FC_FUNC_(h5pset_external_c, H5PSET_EXTERNAL_C) -#define nh5pget_external_count_c H5_FC_FUNC_(h5pget_external_count_c, H5PGET_EXTERNAL_COUNT_C) -#define nh5pget_external_c H5_FC_FUNC_(h5pget_external_c, H5PGET_EXTERNAL_C) -#define nh5pget_btree_ratios_c H5_FC_FUNC_(h5pget_btree_ratios_c, H5PGET_BTREE_RATIOS_C) -#define nh5pset_btree_ratios_c H5_FC_FUNC_(h5pset_btree_ratios_c, H5PSET_BTREE_RATIOS_C) -#define nh5pset_fapl_mpio_c H5_FC_FUNC_(h5pset_fapl_mpio_c, H5PSET_FAPL_MPIO_C) -#define nh5pget_fapl_mpio_c H5_FC_FUNC_(h5pget_fapl_mpio_c, H5PGET_FAPL_MPIO_C) -#define nh5pset_dxpl_mpio_c H5_FC_FUNC_(h5pset_dxpl_mpio_c, H5PSET_DXPL_MPIO_C) -#define nh5pget_dxpl_mpio_c H5_FC_FUNC_(h5pget_dxpl_mpio_c, H5PGET_DXPL_MPIO_C) -#define nh5pget_fclose_degree_c H5_FC_FUNC_(h5pget_fclose_degree_c, H5PGET_FCLOSE_DEGREE_C) -#define nh5pset_fclose_degree_c H5_FC_FUNC_(h5pset_fclose_degree_c, H5PSET_FCLOSE_DEGREE_C) -#define nh5pset_buffer_c H5_FC_FUNC_(h5pset_buffer_c, H5PSET_BUFFER_C) -#define nh5pget_buffer_c H5_FC_FUNC_(h5pget_buffer_c, H5PGET_BUFFER_C) -#define nh5pfill_value_defined_c H5_FC_FUNC_(h5pfill_value_defined_c, H5PFILL_VALUE_DEFINED_C) -#define nh5pset_alloc_time_c H5_FC_FUNC_(h5pset_alloc_time_c, H5PSET_ALLOC_TIME_C) -#define nh5pget_alloc_time_c H5_FC_FUNC_(h5pget_alloc_time_c, H5PGET_ALLOC_TIME_C) -#define nh5pset_fill_time_c H5_FC_FUNC_(h5pset_fill_time_c, H5PSET_FILL_TIME_C) -#define nh5pget_fill_time_c H5_FC_FUNC_(h5pget_fill_time_c, H5PGET_FILL_TIME_C) -#define nh5pset_meta_block_size_c H5_FC_FUNC_(h5pset_meta_block_size_c, H5PSET_META_BLOCK_SIZE_C) -#define nh5pget_meta_block_size_c H5_FC_FUNC_(h5pget_meta_block_size_c, H5PGET_META_BLOCK_SIZE_C) -#define nh5pset_sieve_buf_size_c H5_FC_FUNC_(h5pset_sieve_buf_size_c, H5PSET_SIEVE_BUF_SIZE_C) -#define nh5pget_sieve_buf_size_c H5_FC_FUNC_(h5pget_sieve_buf_size_c, H5PGET_SIEVE_BUF_SIZE_C) -#define nh5pset_hyper_vector_size_c H5_FC_FUNC_(h5pset_hyper_vector_size_c, H5PSET_HYPER_VECTOR_SIZE_C) -#define nh5pget_hyper_vector_size_c H5_FC_FUNC_(h5pget_hyper_vector_size_c, H5PGET_HYPER_VECTOR_SIZE_C) -#define nh5pset_small_data_block_size_c H5_FC_FUNC_(h5pset_small_data_block_size_c, H5PSET_SMALL_DATA_BLOCK_SIZE_C) -#define nh5pget_small_data_block_size_c H5_FC_FUNC_(h5pget_small_data_block_size_c, H5PGET_SMALL_DATA_BLOCK_SIZE_C) -#define nh5pregister_integer_c H5_FC_FUNC_(h5pregister_integer_c, H5PREGISTER_INTEGER_C) -#define nh5pregister_real_c H5_FC_FUNC_(h5pregister_real_c, H5PREGISTER_REAL_C) -#define nh5pregister_double_c H5_FC_FUNC_(h5pregister_double_c, H5PREGISTER_DOUBLE_C) -#define nh5pregisterc_c H5_FC_FUNC_(h5pregisterc_c, H5PREGISTERC_C) -#define nh5pinsert_integer_c H5_FC_FUNC_(h5pinsert_integer_c, H5PINSERT_INTEGER_C) -#define nh5pinsert_real_c H5_FC_FUNC_(h5pinsert_real_c, H5PINSERT_REAL_C) -#define nh5pinsert_double_c H5_FC_FUNC_(h5pinsert_double_c, H5PINSERT_DOUBLE_C) -#define nh5pinsertc_c H5_FC_FUNC_(h5pinsertc_c, H5PINSERTC_C) -#define nh5pset_integer_c H5_FC_FUNC_(h5pset_integer_c, H5PSET_INTEGER_C) -#define nh5pset_real_c H5_FC_FUNC_(h5pset_real_c, H5PSET_REAL_C) -#define nh5pset_double_c H5_FC_FUNC_(h5pset_double_c, H5PSET_DOUBLE_C) -#define nh5psetc_c H5_FC_FUNC_(h5psetc_c, H5PSETC_C) -#define nh5pget_integer_c H5_FC_FUNC_(h5pget_integer_c, H5PGET_INTEGER_C) -#define nh5pget_real_c H5_FC_FUNC_(h5pget_real_c, H5PGET_REAL_C) -#define nh5pget_double_c H5_FC_FUNC_(h5pget_double_c, H5PGET_DOUBLE_C) -#define nh5pgetc_c H5_FC_FUNC_(h5pgetc_c, H5PGETC_C) -#define nh5pexist_c H5_FC_FUNC_(h5pexist_c, H5PEXIST_C) -#define nh5pget_size_c H5_FC_FUNC_(h5pget_size_c, H5PGET_SIZE_C) -#define nh5pget_nprops_c H5_FC_FUNC_(h5pget_nprops_c, H5PGET_NPROPS_C) -#define nh5pget_class_parent_c H5_FC_FUNC_(h5pget_class_parent_c, H5PGET_CLASS_PARENT_C) -#define nh5pisa_class_c H5_FC_FUNC_(h5pisa_class_c, H5PISA_CLASS_C) -#define nh5pcopy_prop_c H5_FC_FUNC_(h5pcopy_prop_c, H5PCOPY_PROP_C) -#define nh5premove_c H5_FC_FUNC_(h5premove_c, H5PREMOVE_C) -#define nh5punregister_c H5_FC_FUNC_(h5punregister_c, H5PUNREGISTER_C) -#define nh5pclose_class_c H5_FC_FUNC_(h5pclose_class_c, H5PCLOSE_CLASS_C) -#define nh5pget_class_name_c H5_FC_FUNC_(h5pget_class_name_c, H5PGET_CLASS_NAME_C) -#define nh5pset_shuffle_c H5_FC_FUNC_(h5pset_shuffle_c, H5PSET_SHUFFLE_C) -#define nh5pset_fletcher32_c H5_FC_FUNC_(h5pset_fletcher32_c, H5PSET_FLETCHER32_C) -#define nh5pset_edc_check_c H5_FC_FUNC_(h5pset_edc_check_c, H5PSET_EDC_CHECK_C) -#define nh5pget_edc_check_c H5_FC_FUNC_(h5pget_edc_check_c, H5PGET_EDC_CHECK_C) -#define nh5pset_family_offset_c H5_FC_FUNC_(h5pset_family_offset_c, H5PSET_FAMILY_OFFSET_C) -#define nh5pget_fapl_multi_c H5_FC_FUNC_(h5pget_fapl_multi_c, H5PGET_FAPL_MULTI_C) -#define nh5pset_fapl_multi_c H5_FC_FUNC_(h5pset_fapl_multi_c, H5PSET_FAPL_MULTI_C) -#define nh5pset_fapl_multi_sc H5_FC_FUNC_(h5pset_fapl_multi_sc, H5PSET_FAPL_MULTI_SC) -#define nh5pset_szip_c H5_FC_FUNC_(h5pset_szip_c, H5PSET_SZIP_C) -#define nh5pall_filters_avail_c H5_FC_FUNC_(h5pall_filters_avail_c, H5PALL_FILTERS_AVAIL_C) -#define nh5pget_attr_phase_change_c H5_FC_FUNC_(h5pget_attr_phase_change_c, H5PGET_ATTR_PHASE_CHANGE_C) -#define nh5pset_attr_creation_order_c H5_FC_FUNC_(h5pset_attr_creation_order_c, H5PSET_ATTR_CREATION_ORDER_C) -#define nh5pset_shared_mesg_nindexes_c H5_FC_FUNC_(h5pset_shared_mesg_nindexes_c, H5PSET_SHARED_MESG_NINDEXES_C) -#define nh5pset_shared_mesg_index_c H5_FC_FUNC_(h5pset_shared_mesg_index_c,H5PSET_SHARED_MESG_INDEX_C) -#define nh5pget_attr_creation_order_c H5_FC_FUNC_(h5pget_attr_creation_order_c,H5PGET_ATTR_CREATION_ORDER_C) -#define nh5pset_libver_bounds_c H5_FC_FUNC_(h5pset_libver_bounds_c,H5PSET_LIBVER_BOUNDS_C) -#define nh5pset_link_creation_order_c H5_FC_FUNC_(h5pset_link_creation_order_c, H5PSET_LINK_CREATION_ORDER_C) -#define nh5pget_link_phase_change_c H5_FC_FUNC_(h5pget_link_phase_change_c, H5PGET_LINK_PHASE_CHANGE_C) -#define nh5pget_obj_track_times_c H5_FC_FUNC_(h5pget_obj_track_times_c, H5PGET_OBJ_TRACK_TIMES_C) -#define nh5pset_obj_track_times_c H5_FC_FUNC_(h5pset_obj_track_times_c, H5PSET_OBJ_TRACK_TIMES_C) -#define nh5pset_create_inter_group_c H5_FC_FUNC_(h5pset_create_inter_group_c,H5PSET_CREATE_INTER_GROUP_C) -#define nh5pget_create_inter_group_c H5_FC_FUNC_(h5pget_create_inter_group_c,H5PGET_CREATE_INTER_GROUP_C) -#define nh5pget_link_creation_order_c H5_FC_FUNC_(h5pget_link_creation_order_c,H5PGET_LINK_CREATION_ORDER_C) -#define nh5pset_char_encoding_c H5_FC_FUNC_(h5pset_char_encoding_c, H5PSET_CHAR_ENCODING_C) -#define nh5pget_char_encoding_c H5_FC_FUNC_(h5pget_char_encoding_c, H5PGET_CHAR_ENCODING_C) -#define nh5pset_copy_object_c H5_FC_FUNC_(h5pset_copy_object_c, H5PSET_COPY_OBJECT_C) -#define nh5pget_copy_object_c H5_FC_FUNC_(h5pget_copy_object_c, H5PGET_COPY_OBJECT_C) -#define nh5pget_data_transform_c H5_FC_FUNC_(h5pget_data_transform_c, H5PGET_DATA_TRANSFORM_C) -#define nh5pset_data_transform_c H5_FC_FUNC_(h5pset_data_transform_c, H5PSET_DATA_TRANSFORM_C) -#define nh5pget_local_heap_size_hint_c H5_FC_FUNC_(h5pget_local_heap_size_hint_c, H5PGET_LOCAL_HEAP_SIZE_HINT_C) -#define nh5pget_est_link_info_c H5_FC_FUNC_(h5pget_est_link_info_c,H5PGET_EST_LINK_INFO_C) -#define nh5pset_est_link_info_c H5_FC_FUNC_(h5pset_est_link_info_c,H5PSET_EST_LINK_INFO_C) -#define nh5pset_local_heap_size_hint_c H5_FC_FUNC_(h5pset_local_heap_size_hint_c, H5PSET_LOCAL_HEAP_SIZE_HINT_C) -#define nh5pset_link_phase_change_c H5_FC_FUNC_(h5pset_link_phase_change_c, H5PSET_LINK_PHASE_CHANGE_C) -#define nh5pset_fapl_direct_c H5_FC_FUNC_(h5pset_fapl_direct_c, H5PSET_FAPL_DIRECT_C) -#define nh5pget_fapl_direct_c H5_FC_FUNC_(h5pget_fapl_direct_c, H5PGET_FAPL_DIRECT_C) -#define nh5pset_attr_phase_change_c H5_FC_FUNC_(h5pset_attr_phase_change_c, H5PSET_ATTR_PHASE_CHANGE_C) -#define nh5pset_nbit_c H5_FC_FUNC_(h5pset_nbit_c, H5PSET_NBIT_C) -#define nh5pset_scaleoffset_c H5_FC_FUNC_(h5pset_scaleoffset_c, H5PSET_SCALEOFFSET_C) -#define nh5pset_nlinks_c H5_FC_FUNC_(h5pset_nlinks_c, H5PSET_NLINKS_C) -#define nh5pget_nlinks_c H5_FC_FUNC_(h5pget_nlinks_c, H5PGET_NLINKS_C) -#define nh5pset_chunk_cache_c H5_FC_FUNC_(h5pset_chunk_cache_c, H5PSET_CHUNK_CACHE_C) -#define nh5pget_chunk_cache_c H5_FC_FUNC_(h5pget_chunk_cache_c, H5PGET_CHUNK_CACHE_C) -#define nh5pget_mpio_actual_io_mode_c H5_FC_FUNC_(h5pget_mpio_actual_io_mode_c, H5PGET_MPIO_ACTUAL_IO_MODE_C) - -H5_FCDLL int_f nh5pcreate_c ( hid_t_f *cls, hid_t_f *prp_id ); -H5_FCDLL int_f nh5pclose_c ( hid_t_f *prp_id ); -H5_FCDLL int_f nh5pcopy_c ( hid_t_f *prp_id , hid_t_f *new_prp_id); -H5_FCDLL int_f nh5pequal_c ( hid_t_f *plist1_id , hid_t_f *plist2_id, int_f *c_flag); -H5_FCDLL int_f nh5pget_class_c ( hid_t_f *prp_id , hid_t_f *classtype); -H5_FCDLL int_f nh5pset_deflate_c ( hid_t_f *prp_id , int_f *level); -H5_FCDLL int_f nh5pset_chunk_c ( hid_t_f *prp_id, int_f *rank, hsize_t_f *dims ); -H5_FCDLL int_f nh5pget_chunk_c ( hid_t_f *prp_id, int_f *max_rank, hsize_t_f *dims ); -H5_FCDLL int_f h5pset_file_image_c (hid_t_f *fapl_id, void *buf_ptr, size_t_f *buf_len); -H5_FCDLL int_f nh5pset_fill_valuec_c (hid_t_f *prp_id, hid_t_f *type_id, _fcd fillvalue); -H5_FCDLL int_f h5pset_fill_value_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pset_fill_value_integer_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pset_fill_value_real_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pset_fill_value_double_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f h5pget_file_image_c (hid_t_f *fapl_id, void **buf_ptr, size_t_f *buf_len); -H5_FCDLL int_f nh5pget_fill_valuec_c (hid_t_f *prp_id, hid_t_f *type_id, _fcd fillvalue); -H5_FCDLL int_f h5pget_fill_value_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pget_fill_value_integer_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pget_fill_value_real_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pget_fill_value_double_c (hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); -H5_FCDLL int_f nh5pset_preserve_c ( hid_t_f *prp_id , int_f *flag); -H5_FCDLL int_f nh5pget_preserve_c ( hid_t_f *prp_id , int_f *flag); -H5_FCDLL int_f nh5pget_version_c (hid_t_f *prp_id, int_f * boot,int_f * freelist, int_f * stab, int_f *shhdr); -H5_FCDLL int_f nh5pset_userblock_c (hid_t_f *prp_id, hsize_t_f * size); -H5_FCDLL int_f nh5pget_userblock_c (hid_t_f *prp_id, hsize_t_f * size); -H5_FCDLL int_f nh5pget_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size); -H5_FCDLL int_f nh5pset_sizes_c (hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size); -H5_FCDLL int_f nh5pset_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk); -H5_FCDLL int_f nh5pget_sym_k_c (hid_t_f *prp_id, int_f* ik, int_f* lk); -H5_FCDLL int_f nh5pset_istore_k_c (hid_t_f *prp_id, int_f* ik); -H5_FCDLL int_f nh5pget_istore_k_c (hid_t_f *prp_id, int_f* ik); -H5_FCDLL int_f nh5pget_driver_c (hid_t_f *prp_id, hid_t_f*driver); -H5_FCDLL int_f nh5pset_fapl_stdio_c (hid_t_f *prp_id); -H5_FCDLL int_f nh5pget_fapl_stdio_c (hid_t_f *prp_id, int_f* io); -H5_FCDLL int_f nh5pset_fapl_sec2_c (hid_t_f *prp_id); -H5_FCDLL int_f nh5pget_fapl_sec2_c (hid_t_f *prp_id, int_f* sec2); -H5_FCDLL int_f nh5pset_alignment_c(hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment); -H5_FCDLL int_f nh5pget_alignment_c(hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment); -H5_FCDLL int_f nh5pget_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag); -H5_FCDLL int_f nh5pset_fapl_core_c (hid_t_f *prp_id, size_t_f* increment, int_f *flag); -H5_FCDLL int_f nh5pset_fapl_family_c (hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ); -H5_FCDLL int_f nh5pget_fapl_family_c (hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ); -H5_FCDLL int_f nh5pset_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes, real_f* rdcc_w0); -H5_FCDLL int_f nh5pget_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes, real_f* rdcc_w0); -H5_FCDLL int_f nh5pget_fapl_split_c(hid_t_f *prp_id, size_t_f* meta_ext_size , _fcd meta_ext, hid_t_f* meta_plist, size_t_f* raw_ext_size, _fcd raw_ext, hid_t_f * raw_plist); -H5_FCDLL int_f nh5pset_fapl_split_c(hid_t_f *prp_id, int_f* meta_len, _fcd meta_ext, hid_t_f* meta_plist, int_f* raw_len, _fcd raw_ext, hid_t_f * raw_plist); -H5_FCDLL int_f nh5pset_gc_references_c(hid_t_f *prp_id, int_f* gc_references); -H5_FCDLL int_f nh5pget_gc_references_c(hid_t_f *prp_id, int_f* gc_references); -H5_FCDLL int_f nh5pset_layout_c (hid_t_f *prp_id, int_f* layout); -H5_FCDLL int_f nh5pget_layout_c (hid_t_f *prp_id, int_f* layout); -H5_FCDLL int_f nh5pset_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ); -H5_FCDLL int_f nh5premove_filter_c (hid_t_f *prp_id, int_f* filter); -H5_FCDLL int_f nh5pmodify_filter_c (hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ); -H5_FCDLL int_f nh5pget_nfilters_c (hid_t_f *prp_id, int_f* nfilters); -H5_FCDLL int_f nh5pget_filter_c(hid_t_f *prp_id, int_f* filter_number, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name, int_f* filter_id); -H5_FCDLL int_f nh5pget_filter_by_id_c(hid_t_f *prp_id, int_f* filter_id, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name); -H5_FCDLL int_f nh5pset_external_c (hid_t_f *prp_id, _fcd name, int_f* namelen, off_t_f* offset, hsize_t_f*bytes); -H5_FCDLL int_f nh5pget_external_count_c (hid_t_f *prp_id, int_f* count); -H5_FCDLL int_f nh5pget_external_c(hid_t_f *prp_id, int_f *idx, size_t_f* name_size, _fcd name, off_t_f* offset, hsize_t_f*bytes); -H5_FCDLL int_f nh5pget_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right); -H5_FCDLL int_f nh5pset_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right); -H5_FCDLL int_f nh5pget_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info); -H5_FCDLL int_f nh5pset_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info); -H5_FCDLL int_f nh5pget_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode); -H5_FCDLL int_f nh5pset_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode); -H5_FCDLL int_f nh5pset_fclose_degree_c(hid_t_f *fapl, int_f *degree); -H5_FCDLL int_f nh5pget_fclose_degree_c(hid_t_f *fapl, int_f *degree); -H5_FCDLL int_f nh5pget_buffer_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pset_buffer_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pset_alloc_time_c(hid_t_f *plist, int_f *flag); -H5_FCDLL int_f nh5pget_alloc_time_c(hid_t_f *plist, int_f *flag); -H5_FCDLL int_f nh5pset_fill_time_c(hid_t_f *plist, int_f *flag); -H5_FCDLL int_f nh5pget_fill_time_c(hid_t_f *plist, int_f *flag); -H5_FCDLL int_f nh5pset_meta_block_size_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pget_meta_block_size_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pset_sieve_buf_size_c(hid_t_f *plist, size_t_f *size); -H5_FCDLL int_f nh5pget_sieve_buf_size_c(hid_t_f *plist, size_t_f *size); -H5_FCDLL int_f nh5pset_small_data_block_size_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pget_small_data_block_size_c(hid_t_f *plist, hsize_t_f *size); -H5_FCDLL int_f nh5pset_hyper_vector_size_c(hid_t_f *plist, size_t_f *size); -H5_FCDLL int_f nh5pget_hyper_vector_size_c(hid_t_f *plist, size_t_f *size); +H5_FCDLL int_f h5pcreate_c( hid_t_f *cls, hid_t_f *prp_id ); +H5_FCDLL int_f h5pclose_c( hid_t_f *prp_id ); +H5_FCDLL int_f h5pcopy_c( hid_t_f *prp_id , hid_t_f *new_prp_id); +H5_FCDLL int_f h5pequal_c( hid_t_f *plist1_id , hid_t_f *plist2_id, int_f *c_flag); +H5_FCDLL int_f h5pget_class_c( hid_t_f *prp_id , hid_t_f *classtype); +H5_FCDLL int_f h5pset_deflate_c( hid_t_f *prp_id , int_f *level); +H5_FCDLL int_f h5pset_chunk_c( hid_t_f *prp_id, int_f *rank, hsize_t_f *dims ); +H5_FCDLL int_f h5pget_chunk_c( hid_t_f *prp_id, int_f *max_rank, hsize_t_f *dims ); +H5_FCDLL int_f h5pset_file_image_c(hid_t_f *fapl_id, void *buf_ptr, size_t_f *buf_len); +H5_FCDLL int_f h5pset_fill_value_c(hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); +H5_FCDLL int_f h5pget_file_image_c(hid_t_f *fapl_id, void **buf_ptr, size_t_f *buf_len); +H5_FCDLL int_f h5pget_fill_value_c(hid_t_f *prp_id, hid_t_f *type_id, void *fillvalue); +H5_FCDLL int_f h5pset_preserve_c( hid_t_f *prp_id , int_f *flag); +H5_FCDLL int_f h5pget_preserve_c( hid_t_f *prp_id , int_f *flag); +H5_FCDLL int_f h5pget_version_c(hid_t_f *prp_id, int_f * boot,int_f * freelist, int_f * stab, int_f *shhdr); +H5_FCDLL int_f h5pset_userblock_c(hid_t_f *prp_id, hsize_t_f * size); +H5_FCDLL int_f h5pget_userblock_c(hid_t_f *prp_id, hsize_t_f * size); +H5_FCDLL int_f h5pget_sizes_c(hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size); +H5_FCDLL int_f h5pset_sizes_c(hid_t_f *prp_id, size_t_f * sizeof_addr, size_t_f * sizeof_size); +H5_FCDLL int_f h5pset_sym_k_c(hid_t_f *prp_id, int_f* ik, int_f* lk); +H5_FCDLL int_f h5pget_sym_k_c(hid_t_f *prp_id, int_f* ik, int_f* lk); +H5_FCDLL int_f h5pset_istore_k_c(hid_t_f *prp_id, int_f* ik); +H5_FCDLL int_f h5pget_istore_k_c(hid_t_f *prp_id, int_f* ik); +H5_FCDLL int_f h5pget_driver_c(hid_t_f *prp_id, hid_t_f*driver); +H5_FCDLL int_f h5pset_fapl_stdio_c(hid_t_f *prp_id); +#ifdef NO_SUCH_F90_FUNCTION +H5_FCDLL int_f h5pget_fapl_stdio_c(hid_t_f *prp_id, int_f* io); +#endif +H5_FCDLL int_f h5pset_fapl_sec2_c(hid_t_f *prp_id); +#ifdef NO_SUCH_F90_FUNCTION +H5_FCDLL int_f h5pget_fapl_sec2_c(hid_t_f *prp_id, int_f* sec2); +#endif +H5_FCDLL int_f h5pset_alignment_c(hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment); +H5_FCDLL int_f h5pget_alignment_c(hid_t_f *prp_id, hsize_t_f* threshold, hsize_t_f* alignment); +H5_FCDLL int_f h5pget_fapl_core_c(hid_t_f *prp_id, size_t_f* increment, int_f *flag); +H5_FCDLL int_f h5pset_fapl_core_c(hid_t_f *prp_id, size_t_f* increment, int_f *flag); +H5_FCDLL int_f h5pset_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ); +H5_FCDLL int_f h5pget_fapl_family_c(hid_t_f *prp_id, hsize_t_f* memb_size, hid_t_f* memb_plist ); +H5_FCDLL int_f h5pset_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes, real_f* rdcc_w0); +H5_FCDLL int_f h5pget_cache_c(hid_t_f *prp_id, int_f* mdc_nelmts, size_t_f* rdcc_nelmts, size_t_f* rdcc_nbytes, real_f* rdcc_w0); +#ifdef NO_SUCH_F90_FUNCTION +H5_FCDLL int_f h5pget_fapl_split_c(hid_t_f *prp_id, size_t_f* meta_ext_size , _fcd meta_ext, hid_t_f* meta_plist, size_t_f* raw_ext_size, _fcd raw_ext, hid_t_f * raw_plist); +#endif +H5_FCDLL int_f h5pset_fapl_split_c(hid_t_f *prp_id, int_f* meta_len, _fcd meta_ext, hid_t_f* meta_plist, int_f* raw_len, _fcd raw_ext, hid_t_f * raw_plist); +H5_FCDLL int_f h5pset_gc_references_c(hid_t_f *prp_id, int_f* gc_references); +H5_FCDLL int_f h5pget_gc_references_c(hid_t_f *prp_id, int_f* gc_references); +H5_FCDLL int_f h5pset_layout_c(hid_t_f *prp_id, int_f* layout); +H5_FCDLL int_f h5pget_layout_c(hid_t_f *prp_id, int_f* layout); +H5_FCDLL int_f h5pset_filter_c(hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ); +H5_FCDLL int_f h5premove_filter_c(hid_t_f *prp_id, int_f* filter); +H5_FCDLL int_f h5pmodify_filter_c(hid_t_f *prp_id, int_f* filter, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values ); +H5_FCDLL int_f h5pget_nfilters_c(hid_t_f *prp_id, int_f* nfilters); +H5_FCDLL int_f h5pget_filter_c(hid_t_f *prp_id, int_f* filter_number, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name, int_f* filter_id); +H5_FCDLL int_f h5pget_filter_by_id_c(hid_t_f *prp_id, int_f* filter_id, int_f* flags, size_t_f* cd_nelmts, int_f* cd_values, size_t_f *namelen, _fcd name); +H5_FCDLL int_f h5pset_external_c(hid_t_f *prp_id, _fcd name, int_f* namelen, off_t_f* offset, hsize_t_f*bytes); +H5_FCDLL int_f h5pget_external_count_c(hid_t_f *prp_id, int_f* count); +H5_FCDLL int_f h5pget_external_c(hid_t_f *prp_id, int_f *idx, size_t_f* name_size, _fcd name, off_t_f* offset, hsize_t_f*bytes); +H5_FCDLL int_f h5pget_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right); +H5_FCDLL int_f h5pset_btree_ratios_c(hid_t_f *prp_id, real_f* left, real_f* middle, real_f* right); +H5_FCDLL int_f h5pset_fclose_degree_c(hid_t_f *fapl, int_f *degree); +H5_FCDLL int_f h5pget_fclose_degree_c(hid_t_f *fapl, int_f *degree); +H5_FCDLL int_f h5pget_buffer_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pset_buffer_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pset_alloc_time_c(hid_t_f *plist, int_f *flag); +H5_FCDLL int_f h5pget_alloc_time_c(hid_t_f *plist, int_f *flag); +H5_FCDLL int_f h5pset_fill_time_c(hid_t_f *plist, int_f *flag); +H5_FCDLL int_f h5pget_fill_time_c(hid_t_f *plist, int_f *flag); +H5_FCDLL int_f h5pset_meta_block_size_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pget_meta_block_size_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pset_sieve_buf_size_c(hid_t_f *plist, size_t_f *size); +H5_FCDLL int_f h5pget_sieve_buf_size_c(hid_t_f *plist, size_t_f *size); +H5_FCDLL int_f h5pset_small_data_block_size_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pget_small_data_block_size_c(hid_t_f *plist, hsize_t_f *size); +H5_FCDLL int_f h5pset_hyper_vector_size_c(hid_t_f *plist, size_t_f *size); +H5_FCDLL int_f h5pget_hyper_vector_size_c(hid_t_f *plist, size_t_f *size); H5_FCDLL int_f h5pcreate_class_c(hid_t_f *parent, _fcd name, int_f *name_len, hid_t_f *cls, H5P_cls_create_func_t create, void *create_data, H5P_cls_copy_func_t copy, void *copy_data, H5P_cls_close_func_t close, void *close_data); -H5_FCDLL int_f nh5pcreate_class_f90_c(hid_t_f *parent, _fcd name, int_f *name_len, hid_t_f *cls); H5_FCDLL int_f h5pregister_c(hid_t_f *cls, _fcd name, int_f * name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pregister_integer_c(hid_t_f *cls, _fcd name, int_f * name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pregister_real_c(hid_t_f *cls, _fcd name, int_f * name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pregister_double_c(hid_t_f *cls, _fcd name, int_f * name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pregisterc_c(hid_t_f *cls, _fcd name, int_f * name_len, size_t_f *size, _fcd value, int_f *value_len); H5_FCDLL int_f h5pinsert_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pinsert_integer_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pinsert_real_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pinsert_double_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, void *value); -H5_FCDLL int_f nh5pinsertc_c(hid_t_f *plist, _fcd name, int_f *name_len, size_t_f *size, _fcd value, int_f *value_len); H5_FCDLL int_f h5pset_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pset_integer_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pset_real_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pset_double_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5psetc_c(hid_t_f *prp_id, _fcd name, int_f *name_len, _fcd value, int_f *value_len); H5_FCDLL int_f h5pget_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pget_double_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pget_integer_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pget_real_c(hid_t_f *prp_id, _fcd name, int_f *name_len, void *value); -H5_FCDLL int_f nh5pgetc_c(hid_t_f *prp_id, _fcd name, int_f *name_len, _fcd value, int_f *value_len); -H5_FCDLL int_f nh5pexist_c(hid_t_f *prp_id, _fcd name, int_f *name_len); -H5_FCDLL int_f nh5pget_size_c(hid_t_f *prp_id, _fcd name, int_f *name_len, size_t_f *size); -H5_FCDLL int_f nh5pget_nprops_c(hid_t_f *prp_id, size_t_f *nprops); -H5_FCDLL int_f nh5pget_class_parent_c(hid_t_f *prp_id, hid_t_f *parent_id); -H5_FCDLL int_f nh5pisa_class_c(hid_t_f *plist, hid_t_f *pclass); -H5_FCDLL int_f nh5pcopy_prop_c(hid_t_f *dst_id, hid_t_f *src_id, _fcd name, int_f *name_len); -H5_FCDLL int_f nh5premove_c(hid_t_f *plid, _fcd name, int_f *name_len); -H5_FCDLL int_f nh5punregister_c(hid_t_f *cls, _fcd name, int_f *name_len); -H5_FCDLL int_f nh5pclose_class_c(hid_t_f * cls); -H5_FCDLL int_f nh5pget_class_name_c(hid_t_f *prp_id, _fcd name, int_f *name_len); -H5_FCDLL int_f nh5pset_shuffle_c ( hid_t_f *prp_id); -H5_FCDLL int_f nh5pset_fletcher32_c ( hid_t_f *prp_id ); -H5_FCDLL int_f nh5pset_edc_check_c ( hid_t_f *prp_id, int_f *flag ); -H5_FCDLL int_f nh5pget_edc_check_c ( hid_t_f *prp_id, int_f *flag ); -H5_FCDLL int_f nh5pset_family_offset_c ( hid_t_f *prp_id , hsize_t_f *offset); -H5_FCDLL int_f nh5pget_fapl_multi_c ( hid_t_f *prp_id , int_f *mem_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag, int_f *maxlen_out); -H5_FCDLL int_f nh5pset_fapl_multi_c ( hid_t_f *prp_id , int_f *mem_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag); -H5_FCDLL int_f nh5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag); -H5_FCDLL int_f nh5pset_szip_c ( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block); -H5_FCDLL int_f nh5pall_filters_avail_c ( hid_t_f *prp_id , int_f *status); -H5_FCDLL int_f nh5pfill_value_defined_c ( hid_t_f *prp_id , int_f *flag); -H5_FCDLL int_f nh5pget_attr_phase_change_c (hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ); -H5_FCDLL int_f nh5pset_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags ); -H5_FCDLL int_f nh5pset_shared_mesg_nindexes_c(hid_t_f *plist_id, int_f *nindexes ); -H5_FCDLL int_f nh5pset_shared_mesg_index_c(hid_t_f *fcpl_id, int_f *index_num, int_f *mesg_type_flags, int_f *min_mesg_size); -H5_FCDLL int_f nh5pget_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags); -H5_FCDLL int_f nh5pset_libver_bounds_c(hid_t_f *fapl_id, int_f *low, int_f *high); -H5_FCDLL int_f nh5pset_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags); -H5_FCDLL int_f nh5pget_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ); -H5_FCDLL int_f nh5pget_obj_track_times_c(hid_t_f *plist_id, int_f *flag); -H5_FCDLL int_f nh5pset_obj_track_times_c(hid_t_f *plist_id, int_f *flag); -H5_FCDLL int_f nh5pset_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group); -H5_FCDLL int_f nh5pget_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group); -H5_FCDLL int_f nh5pget_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags); -H5_FCDLL int_f nh5pset_char_encoding_c(hid_t_f *plist_id, int_f *encoding); -H5_FCDLL int_f nh5pget_char_encoding_c(hid_t_f *plist_id, int_f *encoding); -H5_FCDLL int_f nh5pset_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options); -H5_FCDLL int_f nh5pget_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options); -H5_FCDLL int_f nh5pget_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len, size_t_f *size); -H5_FCDLL int_f nh5pset_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len); -H5_FCDLL int_f nh5pget_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint); -H5_FCDLL int_f nh5pget_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len); -H5_FCDLL int_f nh5pset_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint); -H5_FCDLL int_f nh5pset_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len); -H5_FCDLL int_f nh5pset_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ); -H5_FCDLL int_f nh5pset_fapl_direct_c(hid_t_f *fapl_id, size_t_f *alignment, size_t_f *block_size, size_t_f *cbuf_size ); -H5_FCDLL int_f nh5pget_fapl_direct_c(hid_t_f *fapl_id, size_t_f *alignment, size_t_f *block_size, size_t_f *cbuf_size ); -H5_FCDLL int_f nh5pset_attr_phase_change_c (hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ); -H5_FCDLL int_f nh5pset_nbit_c(hid_t_f *plist_id ); -H5_FCDLL int_f nh5pset_scaleoffset_c(hid_t_f *plist_id, int_f *scale_type, int_f *scale_factor ); -H5_FCDLL int_f nh5pset_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks); -H5_FCDLL int_f nh5pget_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks); -H5_FCDLL int_f nh5pset_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0); -H5_FCDLL int_f nh5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0); -H5_FCDLL int_f nh5pget_mpio_actual_io_mode_c(hid_t_f *dxpl_id, int_f *actual_io_mode); +H5_FCDLL int_f h5pexist_c(hid_t_f *prp_id, _fcd name, int_f *name_len); +H5_FCDLL int_f h5pget_size_c(hid_t_f *prp_id, _fcd name, int_f *name_len, size_t_f *size); +H5_FCDLL int_f h5pget_nprops_c(hid_t_f *prp_id, size_t_f *nprops); +H5_FCDLL int_f h5pget_class_parent_c(hid_t_f *prp_id, hid_t_f *parent_id); +H5_FCDLL int_f h5pisa_class_c(hid_t_f *plist, hid_t_f *pclass); +H5_FCDLL int_f h5pcopy_prop_c(hid_t_f *dst_id, hid_t_f *src_id, _fcd name, int_f *name_len); +H5_FCDLL int_f h5premove_c(hid_t_f *plid, _fcd name, int_f *name_len); +H5_FCDLL int_f h5punregister_c(hid_t_f *cls, _fcd name, int_f *name_len); +H5_FCDLL int_f h5pclose_class_c(hid_t_f * cls); +H5_FCDLL int_f h5pget_class_name_c(hid_t_f *prp_id, _fcd name, int_f *name_len); +H5_FCDLL int_f h5pset_shuffle_c( hid_t_f *prp_id); +H5_FCDLL int_f h5pset_fletcher32_c( hid_t_f *prp_id ); +H5_FCDLL int_f h5pset_edc_check_c( hid_t_f *prp_id, int_f *flag ); +H5_FCDLL int_f h5pget_edc_check_c( hid_t_f *prp_id, int_f *flag ); +H5_FCDLL int_f h5pset_family_offset_c( hid_t_f *prp_id , hsize_t_f *offset); +H5_FCDLL int_f h5pget_fapl_multi_c( hid_t_f *prp_id , int_f *mem_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag, int_f *maxlen_out); +H5_FCDLL int_f h5pset_fapl_multi_c( hid_t_f *prp_id , int_f *mem_map, hid_t_f *memb_fapl, _fcd memb_name, int_f *len, int_f *lenmax, real_f *memb_addr, int_f *flag); +H5_FCDLL int_f h5pset_fapl_multi_sc ( hid_t_f *prp_id , int_f *flag); +H5_FCDLL int_f h5pset_szip_c( hid_t_f *prp_id , int_f *options_mask, int_f *pixels_per_block); +H5_FCDLL int_f h5pall_filters_avail_c( hid_t_f *prp_id , int_f *status); +H5_FCDLL int_f h5pfill_value_defined_c( hid_t_f *prp_id , int_f *flag); +H5_FCDLL int_f h5pget_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ); +H5_FCDLL int_f h5pset_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags ); +H5_FCDLL int_f h5pset_shared_mesg_nindexes_c(hid_t_f *plist_id, int_f *nindexes ); +H5_FCDLL int_f h5pset_shared_mesg_index_c(hid_t_f *fcpl_id, int_f *index_num, int_f *mesg_type_flags, int_f *min_mesg_size); +H5_FCDLL int_f h5pget_attr_creation_order_c(hid_t_f *ocpl_id, int_f *crt_order_flags); +H5_FCDLL int_f h5pset_libver_bounds_c(hid_t_f *fapl_id, int_f *low, int_f *high); +H5_FCDLL int_f h5pset_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags); +H5_FCDLL int_f h5pget_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ); +H5_FCDLL int_f h5pget_obj_track_times_c(hid_t_f *plist_id, int_f *flag); +H5_FCDLL int_f h5pset_obj_track_times_c(hid_t_f *plist_id, int_f *flag); +H5_FCDLL int_f h5pset_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group); +H5_FCDLL int_f h5pget_create_inter_group_c(hid_t_f *lcpl_id, int_f *crt_intermed_group); +H5_FCDLL int_f h5pget_link_creation_order_c(hid_t_f *gcpl_id, int_f *crt_order_flags); +H5_FCDLL int_f h5pset_char_encoding_c(hid_t_f *plist_id, int_f *encoding); +H5_FCDLL int_f h5pget_char_encoding_c(hid_t_f *plist_id, int_f *encoding); +H5_FCDLL int_f h5pset_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options); +H5_FCDLL int_f h5pget_copy_object_c(hid_t_f *ocp_plist_id, int_f *copy_options); +H5_FCDLL int_f h5pget_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len, size_t_f *size); +H5_FCDLL int_f h5pset_data_transform_c(hid_t_f *plist_id, _fcd expression, int_f *expression_len); +H5_FCDLL int_f h5pget_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint); +H5_FCDLL int_f h5pget_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len); +H5_FCDLL int_f h5pset_local_heap_size_hint_c(hid_t_f *gcpl_id, size_t_f *size_hint); +H5_FCDLL int_f h5pset_est_link_info_c(hid_t_f *gcpl_id, int_f *est_num_entries, int_f *est_name_len); +H5_FCDLL int_f h5pset_link_phase_change_c(hid_t_f *gcpl_id, int_f *max_compact, int_f *min_dense ); +H5_FCDLL int_f h5pset_fapl_direct_c(hid_t_f *fapl_id, size_t_f *alignment, size_t_f *block_size, size_t_f *cbuf_size ); +H5_FCDLL int_f h5pget_fapl_direct_c(hid_t_f *fapl_id, size_t_f *alignment, size_t_f *block_size, size_t_f *cbuf_size ); +H5_FCDLL int_f h5pset_attr_phase_change_c(hid_t_f *ocpl_id, int_f *max_compact, int_f *min_dense ); +H5_FCDLL int_f h5pset_nbit_c(hid_t_f *plist_id ); +H5_FCDLL int_f h5pset_scaleoffset_c(hid_t_f *plist_id, int_f *scale_type, int_f *scale_factor ); +H5_FCDLL int_f h5pset_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks); +H5_FCDLL int_f h5pget_nlinks_c(hid_t_f *lapl_id, size_t_f *nlinks); +H5_FCDLL int_f h5pset_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0); +H5_FCDLL int_f h5pget_chunk_cache_c(hid_t_f *dapl_id, size_t_f *rdcc_nslots, size_t_f *rdcc_nbytes, real_f *rdcc_w0); +#ifdef H5_HAVE_PARALLEL +H5_FCDLL int_f h5pget_mpio_actual_io_mode_c(hid_t_f *dxpl_id, int_f *actual_io_mode); +H5_FCDLL int_f h5pget_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info); +H5_FCDLL int_f h5pset_fapl_mpio_c(hid_t_f *prp_id, int_f* comm, int_f* info); +H5_FCDLL int_f h5pget_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode); +H5_FCDLL int_f h5pset_dxpl_mpio_c(hid_t_f *prp_id, int_f* data_xfer_mode); +#endif /* * Functions frome H5Rf.c */ -#define nh5rcreate_object_c H5_FC_FUNC_(h5rcreate_object_c, H5RCREATE_OBJECT_C) -#define nh5rcreate_region_c H5_FC_FUNC_(h5rcreate_region_c, H5RCREATE_REGION_C) -#define nh5rdereference_region_c H5_FC_FUNC_(h5rdereference_region_c, H5RDEREFERENCE_REGION_C) -#define nh5rdereference_object_c H5_FC_FUNC_(h5rdereference_object_c, H5RDEREFERENCE_OBJECT_C) -#define nh5rget_region_region_c H5_FC_FUNC_(h5rget_region_region_c, H5RGET_REGION_REGION_C) -#define nh5rget_object_type_obj_c H5_FC_FUNC_(h5rget_object_type_obj_c, H5RGET_OBJECT_TYPE_OBJ_C) -#define nh5rget_name_object_c H5_FC_FUNC_(h5rget_name_object_c, H5RGET_NAME_OBJECT_C) -#define nh5rget_name_region_c H5_FC_FUNC_(h5rget_name_region_c, H5RGET_NAME_REGION_C) - - -H5_FCDLL int_f nh5rcreate_object_c (haddr_t_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen); -H5_FCDLL int_f nh5rcreate_region_c (int_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *space_id); -H5_FCDLL int_f h5rcreate_ptr_c (void *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *ref_type, hid_t_f *space_id); -H5_FCDLL int_f nh5rdereference_region_c (hid_t_f *dset_id, int_f *ref, hid_t_f *obj_id); -H5_FCDLL int_f nh5rdereference_object_c (hid_t_f *dset_id, haddr_t_f *ref, hid_t_f *obj_id); -H5_FCDLL int_f h5rdereference_ptr_c (hid_t_f *obj_id, int_f *ref_type, void *ref, hid_t_f *ref_obj_id); -H5_FCDLL int_f nh5rget_region_region_c (hid_t_f *dset_id, int_f *ref, hid_t_f *space_id); +H5_FCDLL int_f h5rcreate_region_c(int_f *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, hid_t_f *space_id); +H5_FCDLL int_f h5rcreate_ptr_c(void *ref, hid_t_f *loc_id, _fcd name, int_f *namelen, int_f *ref_type, hid_t_f *space_id); +H5_FCDLL int_f h5rdereference_ptr_c(hid_t_f *obj_id, int_f *ref_type, void *ref, hid_t_f *ref_obj_id); +H5_FCDLL int_f h5rget_region_region_c(hid_t_f *dset_id, int_f *ref, hid_t_f *space_id); H5_FCDLL int_f h5rget_region_ptr_c(hid_t_f *dset_id, void *ref, hid_t_f *space_id); -H5_FCDLL int_f nh5rget_object_type_obj_c (hid_t_f *dset_id, haddr_t_f *ref, int_f *obj_type); -H5_FCDLL int_f nh5rget_name_object_c (hid_t_f *loc_id, haddr_t_f *ref, _fcd name, size_t_f *name_len, size_t_f *size_default); -H5_FCDLL int_f nh5rget_name_region_c (hid_t_f *loc_id, int_f *ref, _fcd name, size_t_f *name_len, size_t_f *size_default); -H5_FCDLL int_f h5rget_name_ptr_c (hid_t_f *loc_id, int_f *ref_type, void *ref, _fcd name, size_t_f *name_len, size_t_f *size_default); -H5_FCDLL int_f h5rget_obj_type_c (hid_t_f *loc_id, int_f *ref_type, void *ref, int_f *obj_type); +H5_FCDLL int_f h5rget_object_type_obj_c(hid_t_f *dset_id, haddr_t_f *ref, int_f *obj_type); +H5_FCDLL int_f h5rget_name_ptr_c(hid_t_f *loc_id, int_f *ref_type, void *ref, _fcd name, size_t_f *name_len, size_t_f *size_default); +H5_FCDLL int_f h5rget_obj_type_c(hid_t_f *loc_id, int_f *ref_type, void *ref, int_f *obj_type); /* * Functions from H5If.c */ -#define nh5iget_type_c H5_FC_FUNC_(h5iget_type_c, H5IGET_TYPE_C) -#define nh5iget_name_c H5_FC_FUNC_(h5iget_name_c, H5IGET_NAME_C) -#define nh5iinc_ref_c H5_FC_FUNC_(h5iinc_ref_c, H5IINC_REF_C) -#define nh5idec_ref_c H5_FC_FUNC_(h5idec_ref_c, H5IDEC_REF_C) -#define nh5iget_ref_c H5_FC_FUNC_(h5iget_ref_c, H5IGET_REF_C) -#define nh5iget_file_id_c H5_FC_FUNC_(h5iget_file_id_c, H5IGET_FILE_ID_C) -#define nh5iis_valid_c H5_FC_FUNC_(h5iis_valid_c, H5IIS_VALID_C) - -H5_FCDLL int_f nh5iget_type_c(hid_t_f *obj_id, int_f *type); -H5_FCDLL int_f nh5iget_name_c(hid_t_f *obj_id, _fcd buf, size_t_f *buf_size, size_t_f *name_size); -H5_FCDLL int_f nh5iinc_ref_c(hid_t_f *obj_id, int_f *ref_count); -H5_FCDLL int_f nh5idec_ref_c(hid_t_f *obj_id, int_f *ref_count); -H5_FCDLL int_f nh5iget_ref_c(hid_t_f *obj_id, int_f *ref_count); -H5_FCDLL int_f nh5iget_file_id_c(hid_t_f *obj_id, hid_t_f *file_id); -H5_FCDLL int_f nh5iis_valid_c(hid_t_f *obj_id, int_f *c_valid); +H5_FCDLL int_f h5iget_type_c(hid_t_f *obj_id, int_f *type); +H5_FCDLL int_f h5iget_name_c(hid_t_f *obj_id, _fcd buf, size_t_f *buf_size, size_t_f *name_size); +H5_FCDLL int_f h5iinc_ref_c(hid_t_f *obj_id, int_f *ref_count); +H5_FCDLL int_f h5idec_ref_c(hid_t_f *obj_id, int_f *ref_count); +H5_FCDLL int_f h5iget_ref_c(hid_t_f *obj_id, int_f *ref_count); +H5_FCDLL int_f h5iget_file_id_c(hid_t_f *obj_id, hid_t_f *file_id); +H5_FCDLL int_f h5iis_valid_c(hid_t_f *obj_id, int_f *c_valid); /* * Functions from H5Ef.c */ -#define nh5eclear_c H5_FC_FUNC_(h5eclear_c, H5ECLEAR_C) -#define nh5eprint_c1 H5_FC_FUNC_(h5eprint_c1, H5EPRINT_C1) -#define nh5eprint_c2 H5_FC_FUNC_(h5eprint_c2, H5EPRINT_C2) -#define nh5eget_major_c H5_FC_FUNC_(h5eget_major_c, H5EGET_MAJOR_C) -#define nh5eget_minor_c H5_FC_FUNC_(h5eget_minor_c, H5EGET_MINOR_C) -#define nh5eset_auto_c H5_FC_FUNC_(h5eset_auto_c, H5ESET_AUTO_C) -#define nprocess_buffer H5_FC_FUNC_(process_buffer, PROCESS_BUFFER) - -H5_FCDLL int_f nh5eclear_c(hid_t_f *estack_id); -H5_FCDLL int_f nh5eprint_c1(_fcd name, int_f* namelen); -H5_FCDLL int_f nh5eprint_c2(void); -H5_FCDLL int_f nh5eget_major_c(int_f* error_no, _fcd name, size_t_f* namelen); -H5_FCDLL int_f nh5eget_minor_c(int_f* error_no, _fcd name, size_t_f* namelen); -H5_FCDLL int_f nh5eset_auto_c(int_f* printflag); +H5_FCDLL int_f h5eclear_c(hid_t_f *estack_id); +H5_FCDLL int_f h5eprint_c1(_fcd name, int_f* namelen); +H5_FCDLL int_f h5eprint_c2(void); +H5_FCDLL int_f h5eget_major_c(int_f* error_no, _fcd name, size_t_f* namelen); +H5_FCDLL int_f h5eget_minor_c(int_f* error_no, _fcd name, size_t_f* namelen); H5_FCDLL int_f h5eset_auto2_c(int_f* printflag, hid_t_f *estack_id, H5E_auto2_t func, void *client_data); -H5_FCDLL int_f nprocess_buffer(hid_t_f *estack_id,void **buffer); /* * Functions from H5f.c */ -#define nh5open_c H5_FC_FUNC_(h5open_c, H5OPEN_C) -#define nh5close_c H5_FC_FUNC_(h5close_c, H5CLOSE_C) -#define nh5init_types_c H5_FC_FUNC_(h5init_types_c, H5INIT_TYPES_C) -#define nh5close_types_c H5_FC_FUNC_(h5close_types_c, H5CLOSE_TYPES_C) -#define nh5init_flags_c H5_FC_FUNC_(h5init_flags_c, H5INIT_FLAGS_C) -#define nh5init1_flags_c H5_FC_FUNC_(h5init1_flags_c, H5INIT1_FLAGS_C) -#define nh5get_libversion_c H5_FC_FUNC_(h5get_libversion_c, H5GET_LIBVERSION_C) -#define nh5check_version_c H5_FC_FUNC_(h5check_version_c, H5CHECK_VERSION_C) -#define nh5garbage_collect_c H5_FC_FUNC_(h5garbage_collect_c, H5GARBAGE_COLLECT_C) -#define nh5dont_atexit_c H5_FC_FUNC_(h5dont_atexit_c, H5DONT_ATEXIT_C) - - -H5_FCDLL int_f nh5open_c(void); -H5_FCDLL int_f nh5close_c(void); -H5_FCDLL int_f nh5init_types_c(hid_t_f *types, hid_t_f *floatingtypes, hid_t_f *integertypes); -H5_FCDLL int_f nh5close_types_c(hid_t_f *types, int_f *lentypes, hid_t_f *floatingtypes, int_f *floatinglen, hid_t_f *integertypes, int_f *integerlen); -H5_FCDLL int_f nh5init_flags_c(int_f *h5d_flags, size_t_f *h5d_size_flags, int_f *h5e_flags, hid_t_f *h5e_hid_flags, int_f *h5f_flags, +H5_FCDLL int_f h5open_c(void); +H5_FCDLL int_f h5close_c(void); +H5_FCDLL int_f h5init_types_c(hid_t_f *types, hid_t_f *floatingtypes, hid_t_f *integertypes); +H5_FCDLL int_f h5close_types_c(hid_t_f *types, int_f *lentypes, hid_t_f *floatingtypes, int_f *floatinglen, hid_t_f *integertypes, int_f *integerlen); +H5_FCDLL int_f h5init_flags_c(int_f *h5d_flags, size_t_f *h5d_size_flags, int_f *h5e_flags, hid_t_f *h5e_hid_flags, int_f *h5f_flags, int_f *h5fd_flags, hid_t_f *h5fd_hid_flags, int_f *h5g_flags, int_f *h5i_flags, int_f *h5l_flags, int_f *h5o_flags, hid_t_f *h5p_flags, int_f *h5p_flags_int, int_f *h5r_flags, int_f *h5s_flags, hsize_t_f *h5s_hsize_flags, int_f *h5t_flags, int_f *h5z_flags, int_f *h5_generic_flags); -H5_FCDLL int_f nh5init1_flags_c(int_f *h5lib_flags); -H5_FCDLL int_f nh5get_libversion_c(int_f *majnum, int_f *minnum, int_f *relnum); -H5_FCDLL int_f nh5check_version_c(int_f *majnum, int_f *minnum, int_f *relnum); -H5_FCDLL int_f nh5garbage_collect_c(void); -H5_FCDLL int_f nh5dont_atexit_c(void); +H5_FCDLL int_f h5init1_flags_c(int_f *h5lib_flags); +H5_FCDLL int_f h5get_libversion_c(int_f *majnum, int_f *minnum, int_f *relnum); +H5_FCDLL int_f h5check_version_c(int_f *majnum, int_f *minnum, int_f *relnum); +H5_FCDLL int_f h5garbage_collect_c(void); +H5_FCDLL int_f h5dont_atexit_c(void); /* * Functions from H5Zf.c */ -#define nh5zunregister_c H5_FC_FUNC_(h5zunregister_c, H5ZUNREGISTER_C) -#define nh5zfilter_avail_c H5_FC_FUNC_(h5zfilter_avail_c, H5ZFILTER_AVAIL_C) -#define nh5zget_filter_info_c H5_FC_FUNC_(h5zget_filter_info_c, H5ZGET_FILTER_INFO_C) - - -H5_FCDLL int_f nh5zunregister_c (int_f *filter); -H5_FCDLL int_f nh5zfilter_avail_c (int_f *filter, int_f *flag); -H5_FCDLL int_f nh5zget_filter_info_c (int_f *filter, int_f *flag); - +H5_FCDLL int_f h5zunregister_c(int_f *filter); +H5_FCDLL int_f h5zfilter_avail_c(int_f *filter, int_f *flag); +H5_FCDLL int_f h5zget_filter_info_c(int_f *filter, int_f *flag); /* * Functions from H5Lf.c */ -#define nh5lcopy_c H5_FC_FUNC_(h5lcopy_c, H5LCOPY_C) -#define nh5lcreate_external_c H5_FC_FUNC_(h5lcreate_external_c, H5LCREATE_EXTERNAL_C) -#define nh5lcreate_hard_c H5_FC_FUNC_(h5lcreate_hard_c, H5LCREATE_HARD_C) -#define nh5lcreate_soft_c H5_FC_FUNC_(h5lcreate_soft_c, H5LCREATE_SOFT_C) -#define nh5ldelete_c H5_FC_FUNC_(h5ldelete_c, H5LDELETE_C) -#define nh5ldelete_by_idx_c H5_FC_FUNC_(h5ldelete_by_idx_c, H5LDELETE_BY_IDX_C) -#define nh5lexists_c H5_FC_FUNC_(h5lexists_c, H5LEXISTS_C) -#define nh5lget_info_c H5_FC_FUNC_(h5lget_info_c, H5LGET_INFO_C) -#define nh5lget_info_by_idx_c H5_FC_FUNC_(h5lget_info_by_idx_c, H5LGET_INFO_BY_IDX_C) -#define nh5lis_registered_c H5_FC_FUNC_(h5lis_registered_c, H5LIS_REGISTERED_C) -#define nh5lmove_c H5_FC_FUNC_(h5lmove_c, H5LMOVE_C) -#define nh5lget_name_by_idx_c H5_FC_FUNC_(h5lget_name_by_idx_c, H5LGET_NAME_BY_IDX_C) -#define nh5lget_val_c H5_FC_FUNC_(h5lget_val_c, H5LGET_VAL_C) -H5_FCDLL int_f nh5lcopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, +H5_FCDLL int_f h5lcopy_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, _fcd dest_name, size_t_f *dest_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lcreate_external_c(_fcd file_name, size_t_f *file_namelen, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5lcreate_external_c(_fcd file_name, size_t_f *file_namelen, _fcd obj_name, size_t_f *obj_namelen, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lcreate_hard_c(hid_t_f *obj_loc_id, _fcd obj_name, size_t_f *obj_namelen, +H5_FCDLL int_f h5lcreate_hard_c(hid_t_f *obj_loc_id, _fcd obj_name, size_t_f *obj_namelen, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id ); -H5_FCDLL int_f nh5lcreate_soft_c(_fcd target_path, size_t_f *target_path_len, +H5_FCDLL int_f h5lcreate_soft_c(_fcd target_path, size_t_f *target_path_len, hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_name_len, hid_t_f *lcpl_id, hid_t_f *lapl_id ); -H5_FCDLL int_f nh5ldelete_c( hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id ); -H5_FCDLL int_f nh5ldelete_by_idx_c (hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +H5_FCDLL int_f h5ldelete_c( hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id ); +H5_FCDLL int_f h5ldelete_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lexists_c (hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, int_f *link_exists); -H5_FCDLL int_f nh5lget_info_c (hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, +H5_FCDLL int_f h5lexists_c(hid_t_f *loc_id, _fcd name, size_t_f *namelen, hid_t_f *lapl_id, int_f *link_exists); +H5_FCDLL int_f h5lget_info_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, int_f *cset, int_f *corder, int_f *corder_valid, int_f *link_type, haddr_t_f *address, size_t_f *val_size, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +H5_FCDLL int_f h5lget_info_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, int_f *link_type, int_f *corder_valid, int_f *corder, int_f *cset, haddr_t_f *address, size_t_f *val_size, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lis_registered_c(int_f *link_cls_id); -H5_FCDLL int_f nh5lmove_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, +H5_FCDLL int_f h5lis_registered_c(int_f *link_cls_id); +H5_FCDLL int_f h5lmove_c(hid_t_f *src_loc_id, _fcd src_name, size_t_f *src_namelen, hid_t_f *dest_loc_id, _fcd dest_name, size_t_f *dest_namelen, hid_t_f *lcpl_id, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lget_name_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, +H5_FCDLL int_f h5lget_name_by_idx_c(hid_t_f *loc_id, _fcd group_name, size_t_f *group_namelen, int_f *index_field, int_f *order, hsize_t_f *n, size_t_f *size, _fcd name, hid_t_f *lapl_id); -H5_FCDLL int_f nh5lget_val_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, size_t_f *size, +H5_FCDLL int_f h5lget_val_c(hid_t_f *link_loc_id, _fcd link_name, size_t_f *link_namelen, size_t_f *size, void *linkval_buff, hid_t_f *lapl_id) ; H5_FCDLL int_f h5literate_c(hid_t_f *group_id, int_f *index_type, int_f *order, hsize_t_f *idx, H5L_iterate_t op, void *op_data ); diff --git a/fortran/src/H5fort_type_defines.h.in b/fortran/src/H5fort_type_defines.h.in new file mode 100644 index 0000000..0e14e86 --- /dev/null +++ b/fortran/src/H5fort_type_defines.h.in @@ -0,0 +1,16 @@ +/* If you are reading this file and it has a '.h' suffix, it was automatically + * generated from the '.in' version. Make changes there. + */ +#define H5_FORTRAN_NATIVE_INTEGER_KIND @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +#define H5_FORTRAN_NATIVE_INTEGER_SIZEOF @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +#define H5_FORTRAN_NATIVE_REAL_KIND @PAC_FORTRAN_NATIVE_REAL_KIND@ +#define H5_FORTRAN_NATIVE_REAL_SIZEOF @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ +#define H5_FORTRAN_NATIVE_DOUBLE_KIND @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +#define H5_FORTRAN_NATIVE_DOUBLE_SIZEOF @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +#define H5_FORTRAN_INTEGER_KINDS @PAC_FC_ALL_INTEGER_KINDS@ +#define H5_FORTRAN_INTEGER_KINDS_SIZEOF @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +#define H5_FORTRAN_REAL_KINDS @PAC_FC_ALL_REAL_KINDS@ +#define H5_FORTRAN_REAL_KINDS_SIZEOF @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +#define H5_HAVE_Fortran_INTEGER_SIZEOF_16 @HAVE_Fortran_INTEGER_SIZEOF_16@ +#define H5_FORTRAN_HAVE_C_LONG_DOUBLE @FORTRAN_HAVE_C_LONG_DOUBLE@ +#define H5_FORTRAN_C_LONG_DOUBLE_IS_UNIQUE @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ diff --git a/fortran/src/H5match_types.c b/fortran/src/H5match_types.c index c4b7f73..37509a0 100644 --- a/fortran/src/H5match_types.c +++ b/fortran/src/H5match_types.c @@ -9,7 +9,7 @@ * PURPOSE * C Program to match C types to Fortran types. * Creates the files H5f90i_gen.h for the C code and - * H5fortran_types.f90 for the Fortran code. + * H5fortran_types.F90 for the Fortran code. * * COPYRIGHT * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * @@ -31,6 +31,7 @@ */ #include +#include #include #include "H5public.h" @@ -45,12 +46,13 @@ FILE * c_header; FILE * fort_header; #define CFILE "H5f90i_gen.h" -#define FFILE "H5fortran_types.f90" +#define FFILE "H5fortran_types.F90" /* Prototypes for the write routines */ -void writeTypedef(const char* c_typedef, const char* c_type, unsigned int size); -void writeTypedefDefault(const char* c_typedef, unsigned int size); -void writeToFiles(const char* c_typedef, const char* fortran_type, const char* c_type, int size, unsigned int kind); +void writeTypedef(const char* c_typedef, const char* c_type, int size); +void writeTypedefDefault(const char* c_typedef, int size); +void writeToFiles(const char* c_typedef, const char* fortran_type, const char* c_type, int size, int kind); +void writeToFilesChr(const char* c_typedef, const char* fortran_type, const char* c_type, int size, char* kind); static void initCfile(void) @@ -100,6 +102,7 @@ initFfile(void) !\n!\n\ ! This file is automatically generated and contains HDF5 Fortran90 type definitions.\n!\n\ MODULE H5FORTRAN_TYPES\n\ + USE ISO_C_BINDING\n\ !\n\ ! HDF5 integers\n\ !\n"); @@ -119,253 +122,198 @@ endFfile(void) } /* Define a c_int_x type in the C header */ -void writeTypedef(const char* c_typedef, const char* c_type, unsigned int size) +void writeTypedef(const char* c_typedef, const char* c_type, int size) { fprintf(c_header, "#define c_%s_%u %s\n", c_typedef, size, c_type); } /* Call this function if there is no matching C type for sizes > 1 */ -void writeTypedefDefault(const char* c_typedef, unsigned int size) +void writeTypedefDefault(const char* c_typedef, int size) { assert(size %2 == 0); - fprintf(c_header, "typedef struct {c_%s_%u a; c_%s_%u b;} c_%s_%u\n", c_typedef, size / 2, c_typedef, size / 2, c_typedef, size); + fprintf(c_header, "typedef struct {c_%s_%u a; c_%s_%u b;} c_%s_%u;\n", c_typedef, size / 2, c_typedef, size / 2, c_typedef, size); } /* Create matching Fortran and C types by writing to both files */ -void writeToFiles(const char* c_typedef, const char* fortran_type, const char* c_type, int size, unsigned int kind) +void writeToFiles(const char* c_typedef, const char* fortran_type, const char* c_type, int size, int kind) { fprintf(fort_header, " INTEGER, PARAMETER :: %s = %u\n", fortran_type, kind); fprintf(c_header, "typedef c_%s_%d %s;\n", c_typedef, size, c_type); } - +void writeToFilesChr(const char* c_typedef, const char* fortran_type, const char* c_type, int size, char* kind) +{ + fprintf(fort_header, " INTEGER, PARAMETER :: %s = %s\n", fortran_type, kind); + fprintf(c_header, "typedef c_%s_%d %s;\n", c_typedef, size, c_type); +} int main(void) { - int FoundIntSize[4]; - unsigned FoundIntSizeKind[4]; - int FoundRealSize[3]; - unsigned FoundRealSizeKind[3]; - int i,j,flag; - char chrA[20],chrB[20]; - int H5_C_HAS_REAL_NATIVE_16; + int FoundIntSize[10]; + int FoundIntSizeKind[10]; + int FoundRealSize[10]; + int FoundRealSizeKind[10]; + int i, j,flag; + char chrA[32],chrB[32]; + + int IntKinds[] = H5_FORTRAN_INTEGER_KINDS; + int IntKinds_SizeOf[] = H5_FORTRAN_INTEGER_KINDS_SIZEOF; + int RealKinds[] = H5_FORTRAN_REAL_KINDS; + int RealKinds_SizeOf[] = H5_FORTRAN_REAL_KINDS_SIZEOF; + char Real_C_TYPES[10][32]; + + int H5_FORTRAN_NUM_INTEGER_KINDS; + int H5_FORTRAN_NUM_REAL_KINDS; + int found_long_double = 0; /* Open target files */ c_header = fopen(CFILE, "w"); fort_header = fopen(FFILE, "w"); - /* Default is C has 16 byte float */ - H5_C_HAS_REAL_NATIVE_16 = 1; - /* Write copyright, boilerplate to both files */ initCfile(); initFfile(); - /* First, define c_int_x */ - -#if defined H5_FORTRAN_HAS_INTEGER_1_KIND - if(sizeof(long long) == 1) - writeTypedef("int", "long long", 1); - else if(sizeof(long) == 1) - writeTypedef("int", "long", 1); - else if(sizeof(int) == 1) - writeTypedef("int", "int", 1); - else if(sizeof(short) == 1) - writeTypedef("int", "short", 1); - else - writeTypedef("int", "char", 1); - /* Actually, char is not necessarily one byte. - * But if char isn't, then nothing is, so this - * is as close as we can get. */ - if(sizeof(size_t) == 1) - writeTypedef("size_t", "size_t", 1); - if(sizeof(hsize_t) == 1) - writeTypedef("hsize_t", "hsize_t", 1); -#endif /*H5_FORTRAN_HAS_INTEGER_1_KIND*/ - -#if defined H5_FORTRAN_HAS_INTEGER_2_KIND - if(sizeof(long long) == 2) - writeTypedef("int", "long long", 2); - else if(sizeof(long) == 2) - writeTypedef("int", "long", 2); - else if(sizeof(int) == 2) - writeTypedef("int", "int", 2); - else if(sizeof(short) == 2) - writeTypedef("int", "short", 2); - else - writeTypedefDefault("int",2); - - if(sizeof(size_t) == 2) - writeTypedef("size_t", "size_t", 2); - if(sizeof(hsize_t) == 2) - writeTypedef("hsize_t", "hsize_t", 2); -#endif /*H5_FORTRAN_HAS_INTEGER_2_KIND*/ - -#if defined H5_FORTRAN_HAS_INTEGER_4_KIND - if(sizeof(long long) == 4) - writeTypedef("int", "long long", 4); - else if(sizeof(long) == 4) - writeTypedef("int", "long", 4); - else if(sizeof(int) == 4) - writeTypedef("int", "int", 4); - else if(sizeof(short) == 4) - writeTypedef("int", "short", 4); - else - writeTypedefDefault("int",4); - - if(sizeof(size_t) == 4) - writeTypedef("size_t", "size_t", 4); - if(sizeof(hsize_t) == 4) - writeTypedef("hsize_t", "hsize_t", 4); - -#endif /*H5_FORTRAN_HAS_INTEGER_4_KIND*/ - -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND - if(sizeof(long long) == 8) - writeTypedef("int", "long long", 8); - else if(sizeof(long) == 8) - writeTypedef("int", "long", 8); - else if(sizeof(int) == 8) - writeTypedef("int", "int", 8); - else if(sizeof(short) == 8) - writeTypedef("int", "short", 8); - else - writeTypedefDefault("int",8); - - if(sizeof(size_t) == 8) - writeTypedef("size_t", "size_t", 8); - if(sizeof(hsize_t) == 8) - writeTypedef("hsize_t", "hsize_t", 8); - -#endif /*H5_FORTRAN_HAS_INTEGER_8_KIND*/ - - /* Define c_float_x */ - -#if defined H5_FORTRAN_HAS_REAL_NATIVE_4_KIND || defined H5_FORTRAN_HAS_REAL_4_KIND - if(sizeof(long double) == 4) - writeTypedef("float", "long double", 4); - else if(sizeof(double) == 4) - writeTypedef("float", "double", 4); - else if(sizeof(float) == 4) - writeTypedef("float", "float", 4); - else - { printf("Fortran REAL is 4 bytes, no corresponding C floating type\n"); - printf("Quitting....\n"); - return -1; - } -#endif /*H5_FORTRAN_HAS_REAL_NATIVE_4_KIND*/ - -#if defined H5_FORTRAN_HAS_REAL_NATIVE_8_KIND || defined H5_FORTRAN_HAS_REAL_8_KIND - if(sizeof(long double) == 8) - writeTypedef("float", "long double", 8); - else if(sizeof(double) == 8) - writeTypedef("float", "double", 8); - else if(sizeof(float) == 8) - writeTypedef("float", "float", 8); - else - { printf("Fortran REAL is 16 bytes, no corresponding C floating type\n"); - printf("Quitting....\n"); - return -1; - } -#endif /*H5_FORTRAN_HAS_REAL_NATIVE_8_KIND*/ - -#if defined H5_FORTRAN_HAS_REAL_NATIVE_16_KIND || defined H5_FORTRAN_HAS_REAL_16_KIND - if(sizeof(long double) == 16) - writeTypedef("float", "long double", 16); - else if(sizeof(double) == 16) - writeTypedef("float", "double", 16); - else if(sizeof(float) == 16) - writeTypedef("float", "float", 16); - else /*C has no 16 byte float so disable it in Fortran*/ - { printf("warning: Fortran REAL is 16 bytes, no corresponding C floating type\n"); - printf(" Disabling Fortran 16 byte REALs\n"); - H5_C_HAS_REAL_NATIVE_16 = 0; - } -#endif /*H5_FORTRAN_HAS_REAL_NATIVE_16_KIND*/ + /* (a) define c_int_x */ + + H5_FORTRAN_NUM_INTEGER_KINDS = (int)(sizeof(IntKinds)/sizeof(IntKinds[0])); + H5_FORTRAN_NUM_REAL_KINDS = (int)(sizeof(RealKinds)/sizeof(RealKinds[0])); + + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(sizeof(long long) == IntKinds_SizeOf[i]) + writeTypedef("int", "long long", IntKinds[i]); + else if(sizeof(long) == IntKinds[i]) + writeTypedef("int", "long", IntKinds[i]); + else if(sizeof(int) == IntKinds_SizeOf[i]) + writeTypedef("int", "int", IntKinds[i]); + else if(sizeof(short) == IntKinds_SizeOf[i]) + writeTypedef("int", "short", IntKinds[i]); + else + if(IntKinds_SizeOf[i] == 1) { + writeTypedef("int", "char", IntKinds[i]); + /* Actually, char is not necessarily one byte. + * But if char isn't, then nothing is, so this + * is as close as we can get. */ + } else { + writeTypedefDefault("int",IntKinds[i]); + } + if(sizeof(size_t) == IntKinds_SizeOf[i]) + writeTypedef("size_t", "size_t", IntKinds[i]); + if(sizeof(hsize_t) == IntKinds_SizeOf[i]) + writeTypedef("hsize_t", "hsize_t", IntKinds[i]); + } + + /* (b) Define c_float_x */ + + for(i=0;i< H5_FORTRAN_NUM_REAL_KINDS;i++) { + if (sizeof(float) == RealKinds_SizeOf[i]) { + writeTypedef("float", "float", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_FLOAT"); + } + else if(sizeof(double) == RealKinds_SizeOf[i]) { + writeTypedef("float", "double", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_DOUBLE"); + } +#if H5_FORTRAN_HAVE_C_LONG_DOUBLE!=0 + else if(sizeof(long double) == RealKinds_SizeOf[i] && found_long_double == 0) { + writeTypedef("float", "long double", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_LONG_DOUBLE"); + found_long_double = 1; + } +# ifdef H5_HAVE_FLOAT128 + /* Don't select a higher precision than Fortran can support */ + else if(sizeof(__float128) == RealKinds_SizeOf[i] && found_long_double == 1 && H5_PAC_FC_MAX_REAL_PRECISION > 28) { + writeTypedef("float", "__float128", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_FLOAT128"); + } +# else + else if(sizeof(long double) == RealKinds_SizeOf[i] && found_long_double == 1 && H5_PAC_FC_MAX_REAL_PRECISION > 28) { + writeTypedef("float", "long double", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_FLOAT128"); + } +# endif +#else /* There is no C_LONG_DOUBLE intrinsic */ +# ifdef H5_HAVE_FLOAT128 + /* Don't select a higher precision than Fortran can support */ + else if(sizeof(__float128) == RealKinds_SizeOf[i] ) { + writeTypedef("float", "__float128", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_FLOAT128"); + } +# else + else if(sizeof(long double) == RealKinds_SizeOf[i] ) { + writeTypedef("float", "long double", RealKinds[i]); + strcpy(Real_C_TYPES[i], "C_FLOAT128"); + } +# endif +#endif + else { + printf("\n **** HDF5 WARNING ****\n"); + printf("Fortran REAL(KIND=%d) is %d Bytes, but no corresponding C float type exists of that size\n",RealKinds[i],RealKinds_SizeOf[i]); + printf(" !!! Fortran interfaces will not be generated for REAL(KIND=%d) !!!\n\n",RealKinds[i]); + + RealKinds_SizeOf[i] = -1; + RealKinds[i] = -1; + } + } /* Now begin defining fortran types. */ fprintf(c_header, "\n"); + /* haddr_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_HADDR_T >= 8 - writeToFiles("int","HADDR_T", "haddr_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_HADDR_T >= 4 - writeToFiles("int","HADDR_T", "haddr_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_HADDR_T >= 2 - writeToFiles("int","HADDR_T", "haddr_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_HADDR_T >= 1 - writeToFiles("int","HADDR_T", "haddr_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#else - /* Error: couldn't find a size for haddr_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_HADDR_T) { + writeToFiles("int","HADDR_T", "haddr_t_f", H5_SIZEOF_HADDR_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for haddr_t */ + return -1; + } /* hsize_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_HSIZE_T >= 8 - writeToFiles("hsize_t","HSIZE_T", "hsize_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_HSIZE_T >= 4 - writeToFiles("hsize_t","HSIZE_T", "hsize_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_HSIZE_T >= 2 - writeToFiles("hsize_t","HSIZE_T", "hsize_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_HSIZE_T >= 1 - writeToFiles("hsize_t","HSIZE_T", "hsize_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#else - /* Error: couldn't find a size for hsize_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_HSIZE_T) { + writeToFiles("hsize_t","HSIZE_T", "hsize_t_f", H5_SIZEOF_HSIZE_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for hsize_t */ + return -1; + } /* hssize_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_HSSIZE_T >= 8 - writeToFiles("int","HSSIZE_T", "hssize_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_HSSIZE_T >= 4 - writeToFiles("int","HSSIZE_T", "hssize_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_HSSIZE_T >= 2 - writeToFiles("int","HSSIZE_T", "hssize_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_HSSIZE_T >= 1 - writeToFiles("int","HSSIZE_T", "hssize_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#else - /* Error: couldn't find a size for hssize_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_HSSIZE_T) { + writeToFiles("int","HSSIZE_T", "hssize_t_f", H5_SIZEOF_HSSIZE_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for hssize_t */ + return -1; + } /* off_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_OFF_T >= 8 - writeToFiles("int","OFF_T", "off_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_OFF_T >= 4 - writeToFiles("int","OFF_T", "off_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_OFF_T >= 2 - writeToFiles("int","OFF_T", "off_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_OFF_T >= 1 - writeToFiles("int","OFF_T", "off_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#else - /* Error: couldn't find a size for off_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_OFF_T) { + writeToFiles("int","OFF_T", "off_t_f", H5_SIZEOF_OFF_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for off_t */ + return -1; + } /* size_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_SIZE_T >= 8 - writeToFiles("size_t","SIZE_T", "size_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_SIZE_T >= 4 - writeToFiles("size_t","SIZE_T", "size_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_SIZE_T >= 2 - writeToFiles("size_t","SIZE_T", "size_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_SIZE_T >= 1 - writeToFiles("size_t","SIZE_T", "size_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#else - /* Error: couldn't find a size for size_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_SIZE_T) { + writeToFiles("size_t","SIZE_T", "size_t_f", H5_SIZEOF_SIZE_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for size_t */ + return -1; + } /* int */ -#if defined H5_FORTRAN_HAS_NATIVE_8_KIND - writeToFiles("int","Fortran_INTEGER", "int_f", 8, H5_FORTRAN_HAS_NATIVE_8_KIND); -#elif defined H5_FORTRAN_HAS_NATIVE_4_KIND - writeToFiles("int","Fortran_INTEGER", "int_f", 4, H5_FORTRAN_HAS_NATIVE_4_KIND); -#elif defined H5_FORTRAN_HAS_NATIVE_2_KIND - writeToFiles("int","Fortran_INTEGER", "int_f", 2, H5_FORTRAN_HAS_NATIVE_2_KIND); -#elif defined H5_FORTRAN_HAS_NATIVE_1_KIND - writeToFiles("int","Fortran_INTEGER", "int_f", 1, H5_FORTRAN_HAS_NATIVE_1_KIND); -#else - /* Error: couldn't find a size for int */ - return -1; -#endif + writeToFiles("int","Fortran_INTEGER", "int_f", H5_FORTRAN_NATIVE_INTEGER_SIZEOF, H5_FORTRAN_NATIVE_INTEGER_KIND); /* int_1, int_2, int_4, int_8 */ @@ -374,29 +322,20 @@ int main(void) /* it a value of the next larger one, but if the next */ /* higher one is not available we assigned it the next lowest */ - FoundIntSize[0] = -1; - FoundIntSize[1] = -2; - FoundIntSize[2] = -4; - FoundIntSize[3] = -8; -#if defined H5_FORTRAN_HAS_INTEGER_1_KIND - FoundIntSize[0] = 1; - FoundIntSizeKind[0] = H5_FORTRAN_HAS_INTEGER_1_KIND; -#endif -#if defined H5_FORTRAN_HAS_INTEGER_2_KIND - FoundIntSize[1] = 2; - FoundIntSizeKind[1] = H5_FORTRAN_HAS_INTEGER_2_KIND; -#endif -#if defined H5_FORTRAN_HAS_INTEGER_4_KIND - FoundIntSize[2] = 4; - FoundIntSizeKind[2] = H5_FORTRAN_HAS_INTEGER_4_KIND; -#endif -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND - FoundIntSize[3] = 8; - FoundIntSizeKind[3] = H5_FORTRAN_HAS_INTEGER_8_KIND ; -#endif + FoundIntSize[0] = -1; + FoundIntSize[1] = -1; + FoundIntSize[2] = -1; + FoundIntSize[3] = -1; + FoundIntSize[4] = -1; + + for(i=0;i 0) /* Found the integer type */ { sprintf(chrA, "Fortran_INTEGER_%d", FoundIntSize[i]); @@ -443,129 +382,77 @@ int main(void) /* it a value of the next larger one, but if the next */ /* higher one is not available we assigned it the next lowest */ - FoundRealSize[0] = -4; - FoundRealSize[1] = -8; - FoundRealSize[2] = -16; - -#if defined H5_FORTRAN_HAS_REAL_4_KIND - FoundRealSize[0] = 4; - FoundRealSizeKind[0] = H5_FORTRAN_HAS_REAL_4_KIND; -#endif -#if defined H5_FORTRAN_HAS_REAL_8_KIND - FoundRealSize[1] = 8; - FoundRealSizeKind[1] = H5_FORTRAN_HAS_REAL_8_KIND; -#endif - -#if defined H5_FORTRAN_HAS_REAL_16_KIND - if(H5_C_HAS_REAL_NATIVE_16 != 0) { - FoundRealSize[2] = 16; - FoundRealSizeKind[2] = H5_FORTRAN_HAS_REAL_16_KIND; - } -#endif - - for(i=0;i<3;i++) { - if( FoundRealSize[i] > 0) /* Found the real type */ - { - sprintf(chrA, "Fortran_REAL_%d", FoundRealSize[i]); - sprintf(chrB, "real_%d_f", FoundRealSize[i]); - writeToFiles("float",chrA, chrB, FoundRealSize[i], FoundRealSizeKind[i]); - } - else /* Did not find the real type */ - { - flag = 0; /* flag indicating if found the next highest */ - for(j=i+1;j<3;j++) /* search for next highest */ - { - if( FoundRealSize[j] > 0) /* Found the next highest */ - { - sprintf(chrA, "Fortran_REAL_%d", (-1)*FoundRealSize[i]); - sprintf(chrB, "real_%d_f", (-1)*FoundRealSize[i]); - if(FoundRealSize[j]>4) { - writeToFiles("float",chrA, chrB, FoundRealSize[j], FoundRealSizeKind[j]); - flag = 1; - } - /* else { */ -/* writeToFiles("float", chrA, chrB, FoundRealSize[j]); */ -/* } */ - flag = 1; - break; - } - } - if(flag == 0) /* No higher one found, so find next lowest */ - { - for(j=1;j>-1;j--) /* Search for next lowest */ - { - if( FoundRealSize[j] > 0) /* Found the next lowest */ - { - sprintf(chrA, "Fortran_REAL_%d", (-1)*FoundRealSize[i]); - sprintf(chrB, "real_%d_f", (-1)*FoundRealSize[i]); - if(FoundRealSize[j]>4) - writeToFiles("float",chrA, chrB, FoundRealSize[j], FoundRealSizeKind[j]); - /* else { */ -/* writeToFiles("float", chrA, chrB, FoundRealSize[j]); */ -/* } */ - flag = 1; - break; - } - } - } - if(flag == 0) /* No higher or lower one found, indicating an error */ - return -1; - } + FoundRealSize[0] = -1; + FoundRealSize[1] = -1; + FoundRealSize[2] = -1; + FoundRealSize[3] = -1; + FoundRealSize[4] = -1; + + for(i=0;i 0) { + FoundRealSize[i] = (int)RealKinds[i]; + FoundRealSizeKind[i] = (int)RealKinds_SizeOf[i]; + sprintf(chrA, "Fortran_REAL_%s", Real_C_TYPES[i]); + sprintf(chrB, "real_%s_f", Real_C_TYPES[i]); + writeToFiles("float",chrA, chrB, RealKinds[i], RealKinds_SizeOf[i]); } + } /* hid_t */ -#if defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_HID_T >= 8 - writeToFiles("int","HID_T", "hid_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_4_KIND && H5_SIZEOF_HID_T >= 4 - writeToFiles("int","HID_T", "hid_t_f", 4, H5_FORTRAN_HAS_INTEGER_4_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_2_KIND && H5_SIZEOF_HID_T >= 2 - writeToFiles("int","HID_T", "hid_t_f", 2, H5_FORTRAN_HAS_INTEGER_2_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_1_KIND && H5_SIZEOF_HID_T >= 1 - writeToFiles("int","HID_T", "hid_t_f", 1, H5_FORTRAN_HAS_INTEGER_1_KIND); -#elif defined H5_FORTRAN_HAS_INTEGER_8_KIND && H5_SIZEOF_HID_T >= 4 - writeToFiles("int","HID_T", "hid_t_f", 8, H5_FORTRAN_HAS_INTEGER_8_KIND); -#else - /* Error: couldn't find a size for hid_t */ - return -1; -#endif + for(i=0;i< H5_FORTRAN_NUM_INTEGER_KINDS;i++) { + if(IntKinds_SizeOf[i] == H5_SIZEOF_HID_T) { + writeToFiles("int","HID_T", "hid_t_f", H5_SIZEOF_HID_T, IntKinds[i]); + break; + } + if(i == (H5_FORTRAN_NUM_INTEGER_KINDS-1) ) + /* Error: couldn't find a size for hid_t */ + return -1; + } /* real_f */ -#if defined H5_FORTRAN_HAS_REAL_NATIVE_16_KIND - if(H5_C_HAS_REAL_NATIVE_16 != 0) { - writeToFiles("float","Fortran_REAL", "real_f", 16, H5_FORTRAN_HAS_REAL_NATIVE_16_KIND); + if(H5_FORTRAN_NATIVE_REAL_SIZEOF == sizeof(long double)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_LONG_DOUBLE"); + else if(H5_FORTRAN_NATIVE_REAL_SIZEOF == sizeof(double)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_DOUBLE"); + else if(H5_FORTRAN_NATIVE_REAL_SIZEOF == sizeof(float)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_FLOAT"); + else { + /* No exact match, choose the next highest */ + if(H5_FORTRAN_NATIVE_REAL_SIZEOF > sizeof(long double)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_LONG_DOUBLE"); + else if(H5_FORTRAN_NATIVE_REAL_SIZEOF > sizeof(double)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_DOUBLE"); + else if(H5_FORTRAN_NATIVE_REAL_SIZEOF > sizeof(float)) + writeToFilesChr("float","Fortran_REAL", "real_f", H5_FORTRAN_NATIVE_REAL_KIND, "C_FLOAT"); + else { + /* Error: couldn't find a size for real_f */ + printf("Error: couldn't find a size for real_f \n"); + return -1; } -#elif defined H5_FORTRAN_HAS_REAL_NATIVE_8_KIND - writeToFiles("float", "Fortran_REAL", "real_f", 8, H5_FORTRAN_HAS_REAL_NATIVE_8_KIND); -#elif defined H5_FORTRAN_HAS_REAL_NATIVE_4_KIND - writeToFiles("float", "Fortran_REAL", "real_f", 4, H5_FORTRAN_HAS_REAL_NATIVE_4_KIND); -#else - /* Error: couldn't find a size for real_f */ - return -1; -#endif + } /* double_f */ -#if defined H5_FORTRAN_HAS_DOUBLE_NATIVE_16_KIND - if(H5_C_HAS_REAL_NATIVE_16 != 0) { /* Check if C has 16 byte floats */ - writeToFiles("float", "Fortran_DOUBLE", "double_f", 16, H5_FORTRAN_HAS_DOUBLE_NATIVE_16_KIND); - } else { -#if defined H5_FORTRAN_HAS_REAL_NATIVE_8_KIND /* Fall back to 8 byte floats */ - writeToFiles("float", "Fortran_DOUBLE", "double_f", 8, H5_FORTRAN_HAS_REAL_NATIVE_8_KIND); - } -#elif defined H5_FORTRAN_HAS_REAL_NATIVE_4_KIND /* Fall back to 4 byte floats */ - writeToFiles("float", "Fortran_DOUBLE", "double_f", 4, H5_FORTRAN_HAS_REAL_NATIVE_4_KIND); + if(H5_FORTRAN_NATIVE_DOUBLE_SIZEOF == sizeof(long double)) + writeToFilesChr("float","Fortran_DOUBLE", "double_f", H5_FORTRAN_NATIVE_DOUBLE_KIND, "C_LONG_DOUBLE"); + else if(H5_FORTRAN_NATIVE_DOUBLE_SIZEOF == sizeof(double)) + writeToFilesChr("float","Fortran_DOUBLE", "double_f", H5_FORTRAN_NATIVE_DOUBLE_KIND, "C_DOUBLE"); + else if(H5_FORTRAN_NATIVE_DOUBLE_SIZEOF == sizeof(float)) + writeToFilesChr("float","Fortran_DOUBLE", "double_f", H5_FORTRAN_NATIVE_DOUBLE_KIND, "C_FLOAT"); +#ifdef H5_HAVE_FLOAT128 + /* Don't select a higher precision than Fortran can support */ + else if(sizeof(__float128) == H5_FORTRAN_NATIVE_DOUBLE_SIZEOF && H5_PAC_FC_MAX_REAL_PRECISION > 28) { + writeToFilesChr("float","Fortran_DOUBLE", "double_f", H5_FORTRAN_NATIVE_DOUBLE_KIND, "C_FLOAT128"); } #else - /* Error: couldn't find a size for double_f when fortran has 16 byte reals */ - return -1; + else if(sizeof(long double) == H5_FORTRAN_NATIVE_DOUBLE_SIZEOF && H5_PAC_FC_MAX_REAL_PRECISION > 28) { + writeToFilesChr("float","Fortran_DOUBLE", "double_f", H5_FORTRAN_NATIVE_DOUBLE_KIND, "C_FLOAT128"); } #endif - -#elif defined H5_FORTRAN_HAS_DOUBLE_NATIVE_8_KIND - writeToFiles("float", "Fortran_DOUBLE", "double_f", 8, H5_FORTRAN_HAS_DOUBLE_NATIVE_8_KIND); -#else - /* Error: couldn't find a size for real_f */ + else { + /* Error: couldn't find a size for double_f */ + printf("Error: couldn't find a size for double_f \n"); return -1; -#endif + } /* Need the buffer size for the fortran derive type 'hdset_reg_ref_t_f03' * in order to be interoperable with C's structure, the C buffer size @@ -574,12 +461,12 @@ int main(void) fprintf(fort_header, " INTEGER, PARAMETER :: H5R_DSET_REG_REF_BUF_SIZE_F = %u\n", H5_SIZEOF_HADDR_T + 4 ); - /* Close files */ endCfile(); endFfile(); fclose(c_header); fclose(fort_header); + return 0; } diff --git a/fortran/src/H5test_kind.f90 b/fortran/src/H5test_kind.f90 deleted file mode 100644 index 1a1a0ec..0000000 --- a/fortran/src/H5test_kind.f90 +++ /dev/null @@ -1,269 +0,0 @@ -!****p* Program/H5test_kind -! -! NAME -! Executable: H5test_kind -! -! FILE -! fortran/src/H5test_kind.f90 -! -! PURPOSE -! This stand alone program is used at build time to generate the program -! H5fortran_detect.f90. It cycles through all the available KIND parameters for -! integers and reals. The appropriate program and subroutines are then generated -! depending on which of the KIND values are found. -! -! NOTES -! This program is depreciated in favor of H5test_kind_SIZEOF.f90 and is only -! used when the Fortran intrinsic function SIZEOF is not available. It generates -! code that does not make use of SIZEOF in H5fortran_detect.f90 which is less -! portable in comparison to using SIZEOF. -! -! The availability of SIZEOF is checked at configure time and the TRUE/FALSE -! condition is set in the configure variable "FORTRAN_HAVE_SIZEOF". -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! Elena Pourma -! -!***** - -PROGRAM test_kind - IMPLICIT NONE - INTEGER :: i, j, ii, ir, last, ikind_numbers(10), rkind_numbers(10) - INTEGER :: ji, jr, jd - last = -1 - ii = 0 - j = SELECTED_INT_KIND(18) - DO i = 1,100 - j = SELECTED_INT_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ii = ii + 1 - ikind_numbers(ii) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - - last = -1 - ir = 0 - DO i = 1,100 - j = SELECTED_REAL_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ir = ir + 1 - rkind_numbers(ir) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - -! Generate program information: - -WRITE(*,'(40(A,/))') & -'!****h* ROBODoc/H5fortran_detect.f90',& -'!',& -'! NAME',& -'! H5fortran_detect',& -'! ',& -'! PURPOSE',& -'! This stand alone program is used at build time to generate the header file',& -'! H5fort_type_defines.h. The source code itself was automatically generated by',& -'! the program H5test_kind.f90',& -'!',& -'! NOTES',& -'! This source code does not make use of the Fortran intrinsic function SIZEOF because',& -'! the availability of the intrinsic function was determined to be not available at',& -'! configure time',& -'!',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'! Copyright by The HDF Group. *',& -'! Copyright by the Board of Trustees of the University of Illinois. *',& -'! All rights reserved. *',& -'! *',& -'! This file is part of HDF5. The full HDF5 copyright notice, including *',& -'! terms governing use, modification, and redistribution, is contained in *',& -'! the files COPYING and Copyright.html. COPYING can be found at the root *',& -'! of the source code distribution tree; Copyright.html can be found at the *',& -'! root level of an installed copy of the electronic HDF5 document set and *',& -'! is linked from the top-level documents page. It can also be found at *',& -'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& -'! access to either file, you may request a copy from help@hdfgroup.org. *',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'!',& -'! AUTHOR',& -'! H5test_kind.f90',& -'!',& -'!*****' - -! Generate a program - - WRITE(*,*) "PROGRAM int_kind" - WRITE(*,*) "WRITE(*,*) "" /*generating header file*/ """ - ji = 0 - WRITE(*, "("" CALL i"", i2.2,""()"")") ji - jr = 0 - WRITE(*, "("" CALL r"", i2.2,""()"")") jr - jd = 0 - WRITE(*, "("" CALL d"", i2.2,""()"")") jd - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" CALL i"", i2.2,""()"")") j - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" CALL r"", i2.2,""()"")") j - ENDDO - WRITE(*,*) "END PROGRAM int_kind" - j = 0 - ji = KIND(1) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" INTEGER :: a = 0" - WRITE(*,*)" INTEGER :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: jchr2" - WRITE(*,*)" a_size = BIT_SIZE(a)" - WRITE(*,*)" IF (a_size .EQ. 8) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_1_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" endif" - WRITE(*,*)" IF (a_size .EQ. 16) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_2_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" endif" - WRITE(*,*)" IF (a_size .EQ. 32) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_4_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 64) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_8_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 128) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_16_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jr = KIND(1.0) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" REAL :: b(32)" - WRITE(*,*)" INTEGER :: a(1)" - WRITE(*,*)" INTEGER :: a_size" - WRITE(*,*)" INTEGER :: real_size" - WRITE(*,*)" CHARACTER(LEN=2) :: jchr2" - WRITE(*,*)" a_size = BIT_SIZE(a(1)) ! Size in bits for integer" - WRITE(*,*)" real_size = (SIZE(TRANSFER(b,a))*a_size)/SIZE(b)" - WRITE(*,*)" IF (real_size .EQ. 32) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",jr - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_NATIVE_4_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (real_size .EQ. 64) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",jr - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_NATIVE_8_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (real_size .EQ. 128) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",jr - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_NATIVE_16_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jd = KIND(1.d0) - WRITE(*, "("" SUBROUTINE d"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" DOUBLE PRECISION :: b=0" - WRITE(*,*)" INTEGER :: a(8)=0" - WRITE(*,*)" INTEGER :: a_size" - WRITE(*,*)" INTEGER :: b_size" - WRITE(*,*)" CHARACTER(LEN=2) :: jchr2" - WRITE(*,*)" a_size = BIT_SIZE(a(1))" - WRITE(*,*)" b_size = SIZE(transfer(b,a))*a_size" - WRITE(*,*)" IF (b_size .EQ. 64) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",jd - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_DOUBLE_NATIVE_8_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (b_size .EQ. 128) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",jd - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_DOUBLE_NATIVE_16_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" INTEGER(",j,") :: a = 0" - WRITE(*,*)" INTEGER :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: jchr2" - WRITE(*,*)" a_size = BIT_SIZE(a)" - WRITE(*,*)" IF (a_size .EQ. 8) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_1_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 16) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_2_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 32) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_4_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 64) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_8_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (a_size .EQ. 128) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_16_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" RETURN" - WRITE(*,*)" END SUBROUTINE" - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" REAL(KIND=",j,") :: b(32)" - WRITE(*,*)" INTEGER :: a(1)" - WRITE(*,*)" INTEGER :: a_size" - WRITE(*,*)" INTEGER :: real_size" - WRITE(*,*)" CHARACTER(LEN=2) :: jchr2" - WRITE(*,*)" a_size = BIT_SIZE(a(1)) ! Size in bits for integer" - WRITE(*,*)" real_size = (SIZE(TRANSFER(b,a))*a_size)/SIZE(b)" - WRITE(*,*)" IF (real_size .EQ. 32) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_4_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" IF (real_size .EQ. 64) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,*)' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_8_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" endif" - WRITE(*,*)" IF (real_size .EQ. 128) THEN" - WRITE(*,*)" WRITE(jchr2,'(I2)')",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_16_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" ENDIF" - WRITE(*,*)" RETURN" - WRITE(*,*)" END SUBROUTINE" - ENDDO -END PROGRAM test_kind - - - diff --git a/fortran/src/H5test_kind_SIZEOF.f90 b/fortran/src/H5test_kind_SIZEOF.f90 deleted file mode 100644 index 468086a..0000000 --- a/fortran/src/H5test_kind_SIZEOF.f90 +++ /dev/null @@ -1,228 +0,0 @@ -!****p* Program/H5test_kind_SIZEOF -! -! NAME -! Executable: H5test_kind -! -! FILE -! fortran/src/H5test_kind_SIZEOF.f90 -! -! PURPOSE -! This stand alone program is used at build time to generate the program -! H5fortran_detect.f90. It cycles through all the available KIND parameters for -! integers and reals. The appropriate program and subroutines are then generated -! depending on which of the KIND values are found. -! -! NOTES -! This program is used in place of H5test_kind.f90 when the Fortran intrinsic -! function SIZEOF is available. It generates code that makes use of SIZEOF in -! H5fortran_detect.f90 which is a portable solution but is not standard -! compliant. The program H5test_kind_C_SIZEOF uses F2008 standard intrinsic -! function instead, which is the preferred method. -! -! The availability of SIZEOF is checked at configure time and the TRUE/FALSE -! condition is set in the configure variable "FORTRAN_HAVE_SIZEOF". -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! M. Scot Breitenfeld -! -!***** - -PROGRAM test_kind - IMPLICIT NONE - INTEGER :: i, j, ii, ir, last, ikind_numbers(10), rkind_numbers(10) - INTEGER :: ji, jr, jd - last = -1 - ii = 0 - - ikind_numbers = 0 - rkind_numbers = 0 - - DO i = 1,100 - j = SELECTED_INT_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ii = ii + 1 - ikind_numbers(ii) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - - last = -1 - ir = 0 - DO i = 1,100 - j = SELECTED_REAL_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ir = ir + 1 - rkind_numbers(ir) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - -! Generate program information: - -WRITE(*,'(40(A,/))') & -'!****h* ROBODoc/H5fortran_detect.f90',& -'!',& -'! NAME',& -'! H5fortran_detect',& -'! ',& -'! PURPOSE',& -'! This stand alone program is used at build time to generate the header file',& -'! H5fort_type_defines.h. The source code itself was automatically generated by',& -'! the program H5test_kind_SIZEOF.f90',& -'!',& -'! NOTES',& -'! This source code makes use of the Fortran intrinsic function SIZEOF because',& -'! the availability of the intrinsic function was determined to be available at',& -'! configure time',& -'!',& -'! COPYRIGHT',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'! Copyright by The HDF Group. *',& -'! Copyright by the Board of Trustees of the University of Illinois. *',& -'! All rights reserved. *',& -'! *',& -'! This file is part of HDF5. The full HDF5 copyright notice, including *',& -'! terms governing use, modification, and redistribution, is contained in *',& -'! the files COPYING and Copyright.html. COPYING can be found at the root *',& -'! of the source code distribution tree; Copyright.html can be found at the *',& -'! root level of an installed copy of the electronic HDF5 document set and *',& -'! is linked from the top-level documents page. It can also be found at *',& -'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& -'! access to either file, you may request a copy from help@hdfgroup.org. *',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'!',& -'! AUTHOR',& -'! H5test_kind_SIZEOF.f90',& -'!',& -'!*****' - -! GENERATE A PROGRAM -! -! (a) Generate the module - - WRITE(*,*) "MODULE H5test_kind_SIZEOF_mod" - WRITE(*,*) "USE ISO_C_BINDING" - WRITE(*,*) "IMPLICIT NONE" - WRITE(*,*) "CONTAINS" - j = 0 - ji = KIND(1) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" INTEGER :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = SIZEOF(a)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jr = 0 - j = KIND(1.0) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") jr - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" REAL :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = SIZEOF(a)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jd = 0 - j = KIND(1.d0) - WRITE(*, "("" SUBROUTINE d"", i2.2,""()"")") jd - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" DOUBLE PRECISION :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = SIZEOF(a)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_DOUBLE_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,'(A,I0,A)')" INTEGER(KIND=",j,") :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = SIZEOF(a)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,'(A,I0,A)')" REAL(KIND= ",j,") :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = SIZEOF(a)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ", j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - ENDDO - WRITE(*,*) "END MODULE H5test_kind_SIZEOF_mod" - WRITE(*,*) "" - - ! (b) generate the main program - - WRITE(*,*) "PROGRAM H5test_kind_SIZEOF" - WRITE(*,*) "USE H5test_kind_SIZEOF_mod" - WRITE(*,*) "WRITE(*,*) "" /*generating header file*/ """ - ji = 0 - WRITE(*, "("" CALL i"", i2.2,""()"")") ji - jr = 0 - WRITE(*, "("" CALL r"", i2.2,""()"")") jr - jd = 0 - WRITE(*, "("" CALL d"", i2.2,""()"")") jd - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" CALL i"", i2.2,""()"")") j - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" CALL r"", i2.2,""()"")") j - ENDDO - WRITE(*,*) "END PROGRAM H5test_kind_SIZEOF" - -END PROGRAM test_kind - - - diff --git a/fortran/src/H5test_kind_STORAGE_SIZE.f90 b/fortran/src/H5test_kind_STORAGE_SIZE.f90 deleted file mode 100644 index 89c904c..0000000 --- a/fortran/src/H5test_kind_STORAGE_SIZE.f90 +++ /dev/null @@ -1,230 +0,0 @@ -!****p* Program/H5test_kind_STORAGE_SIZE -! -! NAME -! Executable: H5test_kind -! -! FILE -! fortran/src/H5test_kind_STORAGE_SIZE.f90 -! -! PURPOSE -! This stand alone program is used at build time to generate the program -! H5fortran_detect.f90. It cycles through all the available KIND parameters for -! integers and reals. The appropriate program and subroutines are then generated -! depending on which of the KIND values are found. -! -! NOTES -! This program is used in place of H5test_kind.f90 or H5test_kind_SIZEOF.f90 when -! the Fortran 2008 intrinsic function STORAGE_SIZE is available. It generates code -! that makes use of STORAGE_SIZE in H5fortran_detect.f90, which will be standard -! compliant. This program is the preferred method. -! -! The availability of STORAGE_SIZE is checked at configure time and the TRUE/FALSE -! condition is set in the configure variable "FORTRAN_HAVE_STORAGE_SIZE". -! -! The use of C_SIZOF(X) is not used since the argument X must be an interoperable -! data entity. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! AUTHOR -! M. Scot Breitenfeld -! -!***** - -PROGRAM test_kind - IMPLICIT NONE - INTEGER :: i, j, ii, ir, last, ikind_numbers(10), rkind_numbers(10) - INTEGER :: ji, jr, jd - last = -1 - ii = 0 - - ikind_numbers = 0 - rkind_numbers = 0 - - DO i = 1,100 - j = SELECTED_INT_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ii = ii + 1 - ikind_numbers(ii) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - - last = -1 - ir = 0 - DO i = 1,100 - j = SELECTED_REAL_KIND(i) - IF(j .NE. last) THEN - IF(last .NE. -1) THEN - ir = ir + 1 - rkind_numbers(ir) = last - ENDIF - last = j - IF(j .EQ. -1) EXIT - ENDIF - ENDDO - -! Generate program information: - -WRITE(*,'(40(A,/))') & -'!****h* ROBODoc/H5fortran_detect.f90',& -'!',& -'! NAME',& -'! H5fortran_detect',& -'! ',& -'! PURPOSE',& -'! This stand alone program is used at build time to generate the header file',& -'! H5fort_type_defines.h. The source code itself was automatically generated by',& -'! the program H5test_kind_STORAGE_SIZE.f90',& -'!',& -'! NOTES',& -'! This source code makes use of the Fortran intrinsic function STORAGE_SIZE because',& -'! the availability of the intrinsic function was determined to be available at',& -'! configure time',& -'!',& -'! COPYRIGHT',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'! Copyright by The HDF Group. *',& -'! Copyright by the Board of Trustees of the University of Illinois. *',& -'! All rights reserved. *',& -'! *',& -'! This file is part of HDF5. The full HDF5 copyright notice, including *',& -'! terms governing use, modification, and redistribution, is contained in *',& -'! the files COPYING and Copyright.html. COPYING can be found at the root *',& -'! of the source code distribution tree; Copyright.html can be found at the *',& -'! root level of an installed copy of the electronic HDF5 document set and *',& -'! is linked from the top-level documents page. It can also be found at *',& -'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& -'! access to either file, you may request a copy from help@hdfgroup.org. *',& -'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& -'!',& -'! AUTHOR',& -'! H5test_kind_C_SIZEOF.f90',& -'!',& -'!*****' - -! GENERATE A PROGRAM -! -! (a) Generate the module - - WRITE(*,*) "MODULE H5test_kind_STORAGE_SIZE_mod" - WRITE(*,*) "USE ISO_C_BINDING" - WRITE(*,*) "IMPLICIT NONE" - WRITE(*,*) "CONTAINS" - j = 0 - ji = KIND(1) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" INTEGER :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",ji - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jr = 0 - j = KIND(1.0) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") jr - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" REAL :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - jd = 0 - j = KIND(1.d0) - WRITE(*, "("" SUBROUTINE d"", i2.2,""()"")") jd - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,*)" DOUBLE PRECISION :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_DOUBLE_NATIVE_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" SUBROUTINE i"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,'(A,I0,A)')" INTEGER(KIND=",j,") :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ",j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_INTEGER_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" SUBROUTINE r"", i2.2,""()"")") j - WRITE(*,*)" IMPLICIT NONE" - WRITE(*,'(A,I0,A)')" REAL(KIND= ",j,") :: a" - WRITE(*,*)" INTEGER(C_SIZE_T) :: a_size" - WRITE(*,*)" CHARACTER(LEN=2) :: ichr2, jchr2" - WRITE(*,*)" a_size = STORAGE_SIZE(a, c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t)" - WRITE(*,*)" WRITE(ichr2,'(I2)') a_size" - WRITE(*,'(A,I0)')" WRITE(jchr2,'(I2)') ", j - WRITE(*,'(A)')' WRITE(*,*) "#define H5_FORTRAN_HAS_REAL_"'// & - "//TRIM(ADJUSTL(ichr2))//"//'"_KIND "'//"//ADJUSTL(jchr2)" - WRITE(*,*)" RETURN" - WRITE(*,*)"END SUBROUTINE" - ENDDO - WRITE(*,*) "END MODULE H5test_kind_STORAGE_SIZE_mod" - WRITE(*,*) "" - - ! (b) generate the main program - - WRITE(*,*) "PROGRAM H5test_kind_STORAGE_SIZE" - WRITE(*,*) "USE H5test_kind_STORAGE_SIZE_mod" - WRITE(*,*) "WRITE(*,*) "" /*generating header file*/ """ - ji = 0 - WRITE(*, "("" CALL i"", i2.2,""()"")") ji - jr = 0 - WRITE(*, "("" CALL r"", i2.2,""()"")") jr - jd = 0 - WRITE(*, "("" CALL d"", i2.2,""()"")") jd - DO i = 1, ii - j = ikind_numbers(i) - WRITE(*, "("" CALL i"", i2.2,""()"")") j - ENDDO - DO i = 1, ir - j = rkind_numbers(i) - WRITE(*, "("" CALL r"", i2.2,""()"")") j - ENDDO - WRITE(*,*) "END PROGRAM H5test_kind_STORAGE_SIZE" - -END PROGRAM test_kind - - - diff --git a/fortran/src/HDF5.F90 b/fortran/src/HDF5.F90 new file mode 100644 index 0000000..64f5be6 --- /dev/null +++ b/fortran/src/HDF5.F90 @@ -0,0 +1,46 @@ +!****h* ROBODoc/HDF5 +! +! NAME +! MODULE HDF5 +! +! FILE +! src/fortran/src/HDF5.f90 +! +! PURPOSE +! This is the main module used for linking to the Fortran HDF library. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +!***** +MODULE HDF5 + USE H5GLOBAL + USE H5F + USE H5G + USE H5E + USE H5I + USE H5L + USE H5S + USE H5D + USE H5A + USE H5T + USE H5O + USE H5P + USE H5R + USE H5Z + USE H5_gen + USE H5LIB +END MODULE HDF5 diff --git a/fortran/src/HDF5.f90 b/fortran/src/HDF5.f90 deleted file mode 100644 index 75af333..0000000 --- a/fortran/src/HDF5.f90 +++ /dev/null @@ -1,56 +0,0 @@ -!****h* ROBODoc/HDF5 -! -! NAME -! MODULE HDF5 -! -! FILE -! src/fortran/src/HDF5.f90 -! -! PURPOSE -! This is the main module used for linking to the Fortran HDF library. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -!***** - -MODULE HDF5 - USE H5GLOBAL - USE H5F - USE H5F_PROVISIONAL - USE H5G - USE H5E - USE H5E_PROVISIONAL - USE H5I - USE H5L - USE H5L_PROVISIONAL - USE H5S - USE H5D - USE H5D_PROVISIONAL - USE H5A - USE H5A_PROVISIONAL - USE H5T - USE H5T_PROVISIONAL - USE H5O - USE H5O_PROVISIONAL - USE H5P - USE H5P_PROVISIONAL - USE H5R - USE H5R_PROVISIONAL - USE H5Z - USE H5_DBLE_INTERFACE - USE H5LIB -END MODULE HDF5 diff --git a/fortran/src/HDF5mpio.f90 b/fortran/src/HDF5mpio.f90 deleted file mode 100644 index b8fb645..0000000 --- a/fortran/src/HDF5mpio.f90 +++ /dev/null @@ -1,55 +0,0 @@ -!****h* ROBODoc/HDF5 (mpio) -! -! NAME -! HDF5 -! -! PURPOSE -! This is the main module used for linking to the Fortran parallel HDF library. -! This file replaces HDF5.f90 when compiling the parallel library. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -!***** - -MODULE HDF5 - USE H5GLOBAL - USE H5F - USE H5F_PROVISIONAL - USE H5G - USE H5E - USE H5E_PROVISIONAL - USE H5I - USE H5L - USE H5L_PROVISIONAL - USE H5S - USE H5D - USE H5D_PROVISIONAL - USE H5A - USE H5A_PROVISIONAL - USE H5T - USE H5T_PROVISIONAL - USE H5O - USE H5O_PROVISIONAL - USE H5P - USE H5P_PROVISIONAL - USE H5FDMPIO - USE H5R - USE H5R_PROVISIONAL - USE H5Z - USE H5_DBLE_INTERFACE - USE H5LIB -END MODULE HDF5 diff --git a/fortran/src/Makefile.am b/fortran/src/Makefile.am index a4b3843..734f46e 100644 --- a/fortran/src/Makefile.am +++ b/fortran/src/Makefile.am @@ -42,42 +42,13 @@ else AM_LDFLAGS+=-static endif -# Include HDF5.f90 if parallel is disabled, HDF5mpiof* if parallel is enabled -if BUILD_PARALLEL_CONDITIONAL - PARALLEL_COND_SRC = H5FDmpiof.c HDF5mpio.f90 H5FDmpioff.f90 -else - PARALLEL_COND_SRC = HDF5.f90 -endif - -# Check if the compiler supports the Fortran 2003 standard -# which should include the intrinsic module iso_c_binding -if FORTRAN_2003_CONDITIONAL_F - F_STATUS = _F03 -else - F_STATUS = _F90 -endif - -# Condition for including/excluding the DBLE interfaces for when the -# default REAL is of type DOUBLE PRECISION. -# We do not include the double precision interfaces if the defaut REAL is -# DOUBLE PRECISION since this would lead to a non-unique conflict with the -# generic interfaces declared as REAL. -if FORTRAN_DEFAULT_REALisDBLE_F - F_DBLE = Exclude -else - F_DBLE = Include -endif - # Source files for the library. -libhdf5_fortran_la_SOURCES=H5f90global.f90 \ - H5fortran_types.f90 H5_ff$(F_STATUS).f90 H5_ff.f90 H5Aff.f90 H5Dff.f90 H5Eff.f90 \ - H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Lff.f90 H5Off.f90 H5Pff.f90 H5Rff.f90 H5Sff.f90 \ - H5Tff.f90 H5Zff.f90 \ - H5_DBLE_Interface$(F_DBLE).f90 \ +libhdf5_fortran_la_SOURCES=H5f90global.F90 \ + H5fortran_types.F90 H5_ff.F90 H5Aff.F90 H5Dff.F90 H5Eff.F90 \ + H5Fff.F90 H5Gff.F90 H5Iff.F90 H5Lff.F90 H5Off.F90 H5Pff.F90 H5Rff.F90 H5Sff.F90 \ + H5Tff.F90 H5Zff.F90 H5_gen.f90 \ H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c \ - H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c \ - H5Aff$(F_STATUS).f90 H5Dff$(F_STATUS).f90 H5Eff$(F_STATUS).f90 H5Fff$(F_STATUS).f90 H5Lff$(F_STATUS).f90 \ - H5Off$(F_STATUS).f90 H5Pff$(F_STATUS).f90 H5Rff$(F_STATUS).f90 H5Tff$(F_STATUS).f90 $(PARALLEL_COND_SRC) + H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c HDF5.f90 # HDF5 Fortran library depends on HDF5 Library. libhdf5_fortran_la_LIBADD=$(LIBHDF5) @@ -86,11 +57,10 @@ libhdf5_fortran_la_LIBADD=$(LIBHDF5) # Remove it only when distclean. DISTCLEANFILES=h5fc -# H5fortran_types.f90 and H5f90i.h are automatically generaed by +# H5fortran_types.F90 and H5f90i.h are automatically generaed by # H5match_types, and must be cleaned explicitly. H5fort_type_defines.h # is generated by H5fortran_detect -MOSTLYCLEANFILES=H5fortran_types.f90 H5f90i_gen.h H5fort_type_defines.h \ - H5fortran_detect.f90 +MOSTLYCLEANFILES=H5fortran_types.F90 H5f90i_gen.h H5fort_type_defines.h # Fortran module files can have different extensions and different names # (e.g., different capitalizations) on different platforms. Write rules @@ -136,55 +106,35 @@ endif # programs. # It's a bit tricky to make sure that Automake builds things in the right # order (especially when using 'gmake -j ...') -# H5test_kind is compiled and run to produce H5fortran_detect.f90. -# H5fortran_detect is compiled and run to produce H5fort_type_defines.h. -# H5match_types.c then includes this file and can be compiled into +# H5_buildiface is compiled and run to produce H5_gen.F90. +# H5match_types.c then includes H5fort_type_defines.h and can be compiled into # H5match_types. When H5match_types is run, it creates H5f90i_gen.h -# and H5fortran_types.f90, which are included in the Fortran library. +# and H5fortran_types.F90, which are included in the Fortran library. # These are the helper programs we need to build. -noinst_PROGRAMS = H5match_types H5fortran_detect H5test_kind +noinst_PROGRAMS = H5match_types H5_buildiface # Tell Automake to create H5f90i_gen.h before it builds the library # sources. When it creates H5f90i_gen.h, it will create -# H5fortran_types.f90 as a side effect. +# H5fortran_types.F90 as a side effect. BUILT_SOURCES = H5f90i_gen.h #Specify what Automake needs to create: first the H5fort_type_defines.h # header, then H5match_types which includes that header, then # it needs to run H5match_types. -H5fortran_types.f90 H5f90i_gen.h: H5match_types$(EXEEXT) +H5fortran_types.F90 H5f90i_gen.h: H5match_types$(EXEEXT) $(RUNSERIAL) ./H5match_types$(EXEEXT) -# H5fort_type_defines.h is created by running H5fortran_detect. -# Obviously, H5fortran_detect needs to be built first. -H5fort_type_defines.h: H5fortran_detect$(EXEEXT) - $(RUNSERIAL) ./H5fortran_detect$(EXEEXT) > H5fort_type_defines.h - -H5match_types.$(OBJEXT): H5fort_type_defines.h - -# Automake knows how to build fortran programs if we tell it the source -# files. -H5fortran_detect_SOURCES = H5fortran_detect.f90 +# H5_buildiface.F90 generates all the APIs that have a KIND type associated +# with them. -# H5test_kind.f90 generates H5Fortran_detect.f90 depending on if -# intrinsic function SIZEOF is available. +H5_gen.F90: H5_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5_buildiface$(EXEEXT) -H5fortran_detect.f90: H5test_kind$(EXEEXT) - $(RUNSERIAL) ./H5test_kind$(EXEEXT) > H5fortran_detect.f90 - -# H5test_kind.f90 is included in the distribution, and Automake knows +# H5_buildiface.F90 is included in the distribution, and Automake knows # how to compile a fortran program given its sources. -if FORTRAN_HAVE_STORAGE_SIZE - H5test_kind_SOURCES = H5test_kind_STORAGE_SIZE.f90 -else -if FORTRAN_HAVE_SIZEOF - H5test_kind_SOURCES = H5test_kind_SIZEOF.f90 -else - H5test_kind_SOURCES = H5test_kind.f90 -endif -endif +H5_buildiface_SOURCES = H5_buildiface.F90 # Mark this directory as part of the Fortran API FORTRAN_API=yes @@ -193,51 +143,28 @@ FORTRAN_API=yes # determining this automagically (like we do with the C files). So, when # doing a parallel make, some modules could be made way before the # modules they depend upon are actually made. *sigh* -H5f90global.lo: $(srcdir)/H5f90global.f90 H5fortran_types.lo -H5fortran_types.lo: H5fortran_types.f90 -H5fortran_detect.lo: H5fortran_detect.f90 -H5test_kind.lo: $(srcdir)/H5test_kind.f90 -H5test_kind_SIZEOF.lo: $(srcdir)/H5test_kind_SIZEOF.f90 -H5_ff$(F_STATUS).lo: $(srcdir)/H5_ff$(F_STATUS).f90 H5f90global.lo -H5_ff.lo: $(srcdir)/H5_ff.f90 H5f90global.lo H5_ff$(F_STATUS).lo -H5Aff.lo: $(srcdir)/H5Aff.f90 H5f90global.lo -H5Dff.lo: $(srcdir)/H5Dff.f90 H5f90global.lo -H5Aff$(F_STATUS).lo: $(srcdir)/H5Aff$(F_STATUS).f90 H5f90global.lo -H5Dff$(F_STATUS).lo: $(srcdir)/H5Dff$(F_STATUS).f90 H5f90global.lo -H5Eff$(F_STATUS).lo: $(srcdir)/H5Eff$(F_STATUS).f90 H5f90global.lo -H5Fff$(F_STATUS).lo: $(srcdir)/H5Fff$(F_STATUS).f90 H5f90global.lo -H5Lff$(F_STATUS).lo: $(srcdir)/H5Lff$(F_STATUS).f90 H5f90global.lo -H5Off$(F_STATUS).lo: $(srcdir)/H5Off$(F_STATUS).f90 H5f90global.lo -H5Pff$(F_STATUS).lo: $(srcdir)/H5Pff$(F_STATUS).f90 H5f90global.lo -H5Rff$(F_STATUS).lo: $(srcdir)/H5Rff$(F_STATUS).f90 H5f90global.lo -H5Tff$(F_STATUS).lo: $(srcdir)/H5Tff$(F_STATUS).f90 H5f90global.lo -H5Eff.lo: $(srcdir)/H5Eff.f90 H5f90global.lo -H5Fff.lo: $(srcdir)/H5Fff.f90 H5f90global.lo -H5Gff.lo: $(srcdir)/H5Gff.f90 H5f90global.lo -H5Iff.lo: $(srcdir)/H5Iff.f90 H5f90global.lo -H5Lff.lo: $(srcdir)/H5Lff.f90 H5f90global.lo -H5Off.lo: $(srcdir)/H5Off.f90 H5f90global.lo -H5Pff.lo: $(srcdir)/H5Pff.f90 H5f90global.lo -H5Rff.lo: $(srcdir)/H5Rff.f90 H5f90global.lo -H5Sff.lo: $(srcdir)/H5Sff.f90 H5f90global.lo -H5Tff.lo: $(srcdir)/H5Tff.f90 H5f90global.lo -H5Zff.lo: $(srcdir)/H5Zff.f90 H5f90global.lo -H5_DBLE_Interface$(F_DBLE).lo: $(srcdir)/H5_DBLE_Interface$(F_DBLE).f90 H5Aff$(F_STATUS).lo H5Dff$(F_STATUS).lo H5Fff$(F_STATUS).lo H5Eff$(F_STATUS).lo H5Pff$(F_STATUS).lo -HDF5.lo: $(srcdir)/HDF5.f90 H5f90global.lo H5_ff$(F_STATUS).lo H5_ff.lo H5Aff.lo H5Aff$(F_STATUS).lo \ - H5Dff.lo H5Dff$(F_STATUS).lo \ - H5Eff.lo H5Eff$(F_STATUS).lo \ - H5Fff.lo H5Fff$(F_STATUS).lo H5Gff.lo H5Iff.lo H5Lff.lo H5Lff$(F_STATUS).lo \ - H5Off.lo H5Off$(F_STATUS).lo H5Pff.lo H5Pff$(F_STATUS).lo H5Rff$(F_STATUS).lo H5Rff.lo \ - H5Sff.lo H5Tff.lo H5Tff$(F_STATUS).lo H5Zff.lo \ - H5_DBLE_Interface$(F_DBLE).lo -H5FDmpioff.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo -HDF5mpio.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5_ff$(F_STATUS).lo H5_ff.lo \ - H5Aff.lo H5Aff$(F_STATUS).lo \ - H5Dff.lo H5Dff$(F_STATUS).lo \ - H5Eff.lo H5Eff$(F_STATUS).lo \ - H5Fff.lo H5Fff$(F_STATUS).lo H5Gff.lo H5Iff.lo H5Lff.lo H5Lff$(F_STATUS).lo \ - H5Off.lo H5Off$(F_STATUS).lo H5Pff.lo H5Pff$(F_STATUS).lo H5Rff$(F_STATUS).lo H5Rff.lo \ - H5Sff.lo H5Tff.lo H5Tff$(F_STATUS).lo H5Zff.lo \ - H5_DBLE_Interface$(F_DBLE).lo H5FDmpioff.lo +H5f90global.lo: $(srcdir)/H5f90global.F90 H5fortran_types.lo +H5_buildiface.lo: $(srcdir)/H5_buildiface.F90 +H5_ff.lo: $(srcdir)/H5_ff.F90 H5f90global.lo +H5Aff.lo: $(srcdir)/H5Aff.F90 H5f90global.lo +H5Dff.lo: $(srcdir)/H5Dff.F90 H5f90global.lo +H5Eff.lo: $(srcdir)/H5Eff.F90 H5f90global.lo +H5Fff.lo: $(srcdir)/H5Fff.F90 H5f90global.lo +H5Gff.lo: $(srcdir)/H5Gff.F90 H5f90global.lo +H5Iff.lo: $(srcdir)/H5Iff.F90 H5f90global.lo +H5Lff.lo: $(srcdir)/H5Lff.F90 H5f90global.lo +H5Off.lo: $(srcdir)/H5Off.F90 H5f90global.lo +H5Pff.lo: $(srcdir)/H5Pff.F90 H5f90global.lo +H5Rff.lo: $(srcdir)/H5Rff.F90 H5f90global.lo +H5Sff.lo: $(srcdir)/H5Sff.F90 H5f90global.lo +H5Tff.lo: $(srcdir)/H5Tff.F90 H5f90global.lo +H5Zff.lo: $(srcdir)/H5Zff.F90 H5f90global.lo +H5_gen.lo: H5_gen.F90 H5f90global.lo H5Aff.lo H5Dff.lo H5Pff.lo +HDF5.lo: $(srcdir)/HDF5.F90 H5f90global.lo H5_ff.lo H5Aff.lo \ + H5Dff.lo \ + H5Eff.lo \ + H5Fff.lo H5Gff.lo H5Iff.lo H5Lff.lo \ + H5Off.lo H5Pff.lo H5Rff.lo \ + H5Sff.lo H5Tff.lo H5Zff.lo H5_gen.lo include $(top_srcdir)/config/conclude.am diff --git a/fortran/src/Makefile.in b/fortran/src/Makefile.in index b169c66..0b1c6cc 100644 --- a/fortran/src/Makefile.in +++ b/fortran/src/Makefile.in @@ -99,16 +99,16 @@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/lt_vers.am \ $(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \ - $(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \ - $(srcdir)/h5fc.in $(top_srcdir)/bin/depcomp \ + $(srcdir)/Makefile.am $(srcdir)/H5config_f.inc.in \ + $(top_srcdir)/bin/mkinstalldirs $(srcdir)/h5fc.in \ + $(srcdir)/H5fort_type_defines.h.in $(top_srcdir)/bin/depcomp \ $(top_srcdir)/bin/test-driver README # Some Fortran compilers can't build shared libraries, so sometimes we # want to build a shared C library and a static Fortran library. If so, # pass the -static flag to the library linker. @FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static -noinst_PROGRAMS = H5match_types$(EXEEXT) H5fortran_detect$(EXEEXT) \ - H5test_kind$(EXEEXT) +noinst_PROGRAMS = H5match_types$(EXEEXT) H5_buildiface$(EXEEXT) TESTS = subdir = fortran/src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -117,8 +117,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = h5fc +CONFIG_HEADER = $(top_builddir)/src/H5config.h H5config_f.inc +CONFIG_CLEAN_FILES = h5fc H5fort_type_defines.h CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ @@ -150,30 +150,12 @@ am__uninstall_files_from_dir = { \ am__installdirs = "$(DESTDIR)$(libdir)" LTLIBRARIES = $(lib_LTLIBRARIES) libhdf5_fortran_la_DEPENDENCIES = $(LIBHDF5) -am__libhdf5_fortran_la_SOURCES_DIST = H5f90global.f90 \ - H5fortran_types.f90 H5_ff$(F_STATUS).f90 H5_ff.f90 H5Aff.f90 \ - H5Dff.f90 H5Eff.f90 H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Lff.f90 \ - H5Off.f90 H5Pff.f90 H5Rff.f90 H5Sff.f90 H5Tff.f90 H5Zff.f90 \ - H5_DBLE_Interface$(F_DBLE).f90 H5f90kit.c H5_f.c H5Af.c H5Df.c \ - H5Ef.c H5Ff.c H5Gf.c H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c \ - H5Tf.c H5Zf.c H5Aff$(F_STATUS).f90 H5Dff$(F_STATUS).f90 \ - H5Eff$(F_STATUS).f90 H5Fff$(F_STATUS).f90 H5Lff$(F_STATUS).f90 \ - H5Off$(F_STATUS).f90 H5Pff$(F_STATUS).f90 H5Rff$(F_STATUS).f90 \ - H5Tff$(F_STATUS).f90 HDF5.f90 H5FDmpiof.c HDF5mpio.f90 \ - H5FDmpioff.f90 -@BUILD_PARALLEL_CONDITIONAL_FALSE@am__objects_1 = HDF5.lo -@BUILD_PARALLEL_CONDITIONAL_TRUE@am__objects_1 = H5FDmpiof.lo \ -@BUILD_PARALLEL_CONDITIONAL_TRUE@ HDF5mpio.lo H5FDmpioff.lo am_libhdf5_fortran_la_OBJECTS = H5f90global.lo H5fortran_types.lo \ - H5_ff$(F_STATUS).lo H5_ff.lo H5Aff.lo H5Dff.lo H5Eff.lo \ - H5Fff.lo H5Gff.lo H5Iff.lo H5Lff.lo H5Off.lo H5Pff.lo H5Rff.lo \ - H5Sff.lo H5Tff.lo H5Zff.lo H5_DBLE_Interface$(F_DBLE).lo \ - H5f90kit.lo H5_f.lo H5Af.lo H5Df.lo H5Ef.lo H5Ff.lo H5Gf.lo \ - H5If.lo H5Lf.lo H5Of.lo H5Pf.lo H5Rf.lo H5Sf.lo H5Tf.lo \ - H5Zf.lo H5Aff$(F_STATUS).lo H5Dff$(F_STATUS).lo \ - H5Eff$(F_STATUS).lo H5Fff$(F_STATUS).lo H5Lff$(F_STATUS).lo \ - H5Off$(F_STATUS).lo H5Pff$(F_STATUS).lo H5Rff$(F_STATUS).lo \ - H5Tff$(F_STATUS).lo $(am__objects_1) + H5_ff.lo H5Aff.lo H5Dff.lo H5Eff.lo H5Fff.lo H5Gff.lo H5Iff.lo \ + H5Lff.lo H5Off.lo H5Pff.lo H5Rff.lo H5Sff.lo H5Tff.lo H5Zff.lo \ + H5_gen.lo H5f90kit.lo H5_f.lo H5Af.lo H5Df.lo H5Ef.lo H5Ff.lo \ + H5Gf.lo H5If.lo H5Lf.lo H5Of.lo H5Pf.lo H5Rf.lo H5Sf.lo \ + H5Tf.lo H5Zf.lo HDF5.lo libhdf5_fortran_la_OBJECTS = $(am_libhdf5_fortran_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) @@ -184,19 +166,12 @@ libhdf5_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \ $(AM_FCFLAGS) $(FCFLAGS) $(libhdf5_fortran_la_LDFLAGS) \ $(LDFLAGS) -o $@ PROGRAMS = $(noinst_PROGRAMS) -am_H5fortran_detect_OBJECTS = H5fortran_detect.$(OBJEXT) -H5fortran_detect_OBJECTS = $(am_H5fortran_detect_OBJECTS) -H5fortran_detect_LDADD = $(LDADD) +am_H5_buildiface_OBJECTS = H5_buildiface.$(OBJEXT) +H5_buildiface_OBJECTS = $(am_H5_buildiface_OBJECTS) +H5_buildiface_LDADD = $(LDADD) H5match_types_SOURCES = H5match_types.c H5match_types_OBJECTS = H5match_types.$(OBJEXT) H5match_types_LDADD = $(LDADD) -am__H5test_kind_SOURCES_DIST = H5test_kind.f90 H5test_kind_SIZEOF.f90 \ - H5test_kind_STORAGE_SIZE.f90 -@FORTRAN_HAVE_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@am_H5test_kind_OBJECTS = H5test_kind.$(OBJEXT) -@FORTRAN_HAVE_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@am_H5test_kind_OBJECTS = H5test_kind_SIZEOF.$(OBJEXT) -@FORTRAN_HAVE_STORAGE_SIZE_TRUE@am_H5test_kind_OBJECTS = H5test_kind_STORAGE_SIZE.$(OBJEXT) -H5test_kind_OBJECTS = $(am_H5test_kind_OBJECTS) -H5test_kind_LDADD = $(LDADD) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false @@ -213,6 +188,24 @@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f +PPFCCOMPILE = $(FC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS) +LTPPFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(FC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_FCFLAGS) $(FCFLAGS) +AM_V_PPFC = $(am__v_PPFC_@AM_V@) +am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@) +am__v_PPFC_0 = @echo " PPFC " $@; +am__v_PPFC_1 = +FCLD = $(FC) +FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_FCLD = $(am__v_FCLD_@AM_V@) +am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) +am__v_FCLD_0 = @echo " FCLD " $@; +am__v_FCLD_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ @@ -238,25 +231,17 @@ AM_V_FC = $(am__v_FC_@AM_V@) am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@) am__v_FC_0 = @echo " FC " $@; am__v_FC_1 = -FCLD = $(FC) -FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_FCLD = $(am__v_FCLD_@AM_V@) -am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) -am__v_FCLD_0 = @echo " FCLD " $@; -am__v_FCLD_1 = -SOURCES = $(libhdf5_fortran_la_SOURCES) $(H5fortran_detect_SOURCES) \ - H5match_types.c $(H5test_kind_SOURCES) -DIST_SOURCES = $(am__libhdf5_fortran_la_SOURCES_DIST) \ - $(H5fortran_detect_SOURCES) H5match_types.c \ - $(am__H5test_kind_SOURCES_DIST) +SOURCES = $(libhdf5_fortran_la_SOURCES) $(H5_buildiface_SOURCES) \ + H5match_types.c +DIST_SOURCES = $(libhdf5_fortran_la_SOURCES) $(H5_buildiface_SOURCES) \ + H5match_types.c am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)H5config_f.inc.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. @@ -513,14 +498,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -530,13 +522,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -578,6 +569,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ @@ -733,34 +736,14 @@ lib_LTLIBRARIES = libhdf5_fortran.la # Add libtool numbers to the HDF5 Fortran library (from config/lt_vers.am) libhdf5_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS) -@BUILD_PARALLEL_CONDITIONAL_FALSE@PARALLEL_COND_SRC = HDF5.f90 - -# Include HDF5.f90 if parallel is disabled, HDF5mpiof* if parallel is enabled -@BUILD_PARALLEL_CONDITIONAL_TRUE@PARALLEL_COND_SRC = H5FDmpiof.c HDF5mpio.f90 H5FDmpioff.f90 -@FORTRAN_2003_CONDITIONAL_F_FALSE@F_STATUS = _F90 - -# Check if the compiler supports the Fortran 2003 standard -# which should include the intrinsic module iso_c_binding -@FORTRAN_2003_CONDITIONAL_F_TRUE@F_STATUS = _F03 -@FORTRAN_DEFAULT_REALisDBLE_F_FALSE@F_DBLE = Include - -# Condition for including/excluding the DBLE interfaces for when the -# default REAL is of type DOUBLE PRECISION. -# We do not include the double precision interfaces if the defaut REAL is -# DOUBLE PRECISION since this would lead to a non-unique conflict with the -# generic interfaces declared as REAL. -@FORTRAN_DEFAULT_REALisDBLE_F_TRUE@F_DBLE = Exclude # Source files for the library. -libhdf5_fortran_la_SOURCES = H5f90global.f90 \ - H5fortran_types.f90 H5_ff$(F_STATUS).f90 H5_ff.f90 H5Aff.f90 H5Dff.f90 H5Eff.f90 \ - H5Fff.f90 H5Gff.f90 H5Iff.f90 H5Lff.f90 H5Off.f90 H5Pff.f90 H5Rff.f90 H5Sff.f90 \ - H5Tff.f90 H5Zff.f90 \ - H5_DBLE_Interface$(F_DBLE).f90 \ +libhdf5_fortran_la_SOURCES = H5f90global.F90 \ + H5fortran_types.F90 H5_ff.F90 H5Aff.F90 H5Dff.F90 H5Eff.F90 \ + H5Fff.F90 H5Gff.F90 H5Iff.F90 H5Lff.F90 H5Off.F90 H5Pff.F90 H5Rff.F90 H5Sff.F90 \ + H5Tff.F90 H5Zff.F90 H5_gen.f90 \ H5f90kit.c H5_f.c H5Af.c H5Df.c H5Ef.c H5Ff.c H5Gf.c \ - H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c \ - H5Aff$(F_STATUS).f90 H5Dff$(F_STATUS).f90 H5Eff$(F_STATUS).f90 H5Fff$(F_STATUS).f90 H5Lff$(F_STATUS).f90 \ - H5Off$(F_STATUS).f90 H5Pff$(F_STATUS).f90 H5Rff$(F_STATUS).f90 H5Tff$(F_STATUS).f90 $(PARALLEL_COND_SRC) + H5If.c H5Lf.c H5Of.c H5Pf.c H5Rf.c H5Sf.c H5Tf.c H5Zf.c HDF5.f90 # HDF5 Fortran library depends on HDF5 Library. @@ -770,12 +753,10 @@ libhdf5_fortran_la_LIBADD = $(LIBHDF5) # Remove it only when distclean. DISTCLEANFILES = h5fc -# H5fortran_types.f90 and H5f90i.h are automatically generaed by +# H5fortran_types.F90 and H5f90i.h are automatically generaed by # H5match_types, and must be cleaned explicitly. H5fort_type_defines.h # is generated by H5fortran_detect -MOSTLYCLEANFILES = H5fortran_types.f90 H5f90i_gen.h H5fort_type_defines.h \ - H5fortran_detect.f90 - +MOSTLYCLEANFILES = H5fortran_types.F90 H5f90i_gen.h H5fort_type_defines.h @BUILD_PARALLEL_CONDITIONAL_FALSE@H5FC_NAME = h5fc # Custom rule for installing h5fc, since it will be named h5pfc if hdf5 @@ -784,18 +765,12 @@ MOSTLYCLEANFILES = H5fortran_types.f90 H5f90i_gen.h H5fort_type_defines.h \ # Tell Automake to create H5f90i_gen.h before it builds the library # sources. When it creates H5f90i_gen.h, it will create -# H5fortran_types.f90 as a side effect. +# H5fortran_types.F90 as a side effect. BUILT_SOURCES = H5f90i_gen.h -# Automake knows how to build fortran programs if we tell it the source -# files. -H5fortran_detect_SOURCES = H5fortran_detect.f90 -@FORTRAN_HAVE_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@H5test_kind_SOURCES = H5test_kind.f90 -@FORTRAN_HAVE_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@H5test_kind_SOURCES = H5test_kind_SIZEOF.f90 - -# H5test_kind.f90 is included in the distribution, and Automake knows +# H5_buildiface.F90 is included in the distribution, and Automake knows # how to compile a fortran program given its sources. -@FORTRAN_HAVE_STORAGE_SIZE_TRUE@H5test_kind_SOURCES = H5test_kind_STORAGE_SIZE.f90 +H5_buildiface_SOURCES = H5_buildiface.F90 # Mark this directory as part of the Fortran API FORTRAN_API = yes @@ -819,11 +794,11 @@ TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) -all: $(BUILT_SOURCES) +all: $(BUILT_SOURCES) H5config_f.inc $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: -.SUFFIXES: .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs +.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -855,8 +830,21 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): + +H5config_f.inc: stamp-h2 + @test -f $@ || rm -f stamp-h2 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h2 + +stamp-h2: $(srcdir)/H5config_f.inc.in $(top_builddir)/config.status + @rm -f stamp-h2 + cd $(top_builddir) && $(SHELL) ./config.status fortran/src/H5config_f.inc + +distclean-hdr: + -rm -f H5config_f.inc stamp-h2 h5fc: $(top_builddir)/config.status $(srcdir)/h5fc.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +H5fort_type_defines.h: $(top_builddir)/config.status $(srcdir)/H5fort_type_defines.h.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) @@ -905,18 +893,14 @@ clean-noinstPROGRAMS: echo " rm -f" $$list; \ rm -f $$list -H5fortran_detect$(EXEEXT): $(H5fortran_detect_OBJECTS) $(H5fortran_detect_DEPENDENCIES) $(EXTRA_H5fortran_detect_DEPENDENCIES) - @rm -f H5fortran_detect$(EXEEXT) - $(AM_V_FCLD)$(FCLINK) $(H5fortran_detect_OBJECTS) $(H5fortran_detect_LDADD) $(LIBS) +H5_buildiface$(EXEEXT): $(H5_buildiface_OBJECTS) $(H5_buildiface_DEPENDENCIES) $(EXTRA_H5_buildiface_DEPENDENCIES) + @rm -f H5_buildiface$(EXEEXT) + $(AM_V_FCLD)$(FCLINK) $(H5_buildiface_OBJECTS) $(H5_buildiface_LDADD) $(LIBS) H5match_types$(EXEEXT): $(H5match_types_OBJECTS) $(H5match_types_DEPENDENCIES) $(EXTRA_H5match_types_DEPENDENCIES) @rm -f H5match_types$(EXEEXT) $(AM_V_CCLD)$(LINK) $(H5match_types_OBJECTS) $(H5match_types_LDADD) $(LIBS) -H5test_kind$(EXEEXT): $(H5test_kind_OBJECTS) $(H5test_kind_DEPENDENCIES) $(EXTRA_H5test_kind_DEPENDENCIES) - @rm -f H5test_kind$(EXEEXT) - $(AM_V_FCLD)$(FCLINK) $(H5test_kind_OBJECTS) $(H5test_kind_LDADD) $(LIBS) - mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -926,7 +910,6 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Af.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Df.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ef.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FDmpiof.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Ff.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Gf.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5If.Plo@am__quote@ @@ -941,6 +924,15 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5f90kit.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5match_types.Po@am__quote@ +.F90.o: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ $< + +.F90.obj: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.F90.lo: + $(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $< + .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @@ -1208,7 +1200,7 @@ check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) H5config_f.inc all-local installdirs: for dir in "$(DESTDIR)$(libdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ @@ -1259,7 +1251,7 @@ distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ - distclean-local distclean-tags + distclean-hdr distclean-local distclean-tags dvi: dvi-am @@ -1328,14 +1320,14 @@ uninstall-am: uninstall-libLTLIBRARIES uninstall-local check-am clean clean-generic clean-libLTLIBRARIES \ clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \ ctags ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-local distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-data-local install-dvi \ - install-dvi-am install-exec install-exec-am install-exec-local \ - install-html install-html-am install-info install-info-am \ - install-libLTLIBRARIES install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ + distclean-hdr distclean-libtool distclean-local distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-data-local \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-exec-local install-html install-html-am install-info \ + install-info-am install-libLTLIBRARIES install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \ @@ -1401,72 +1393,42 @@ install-exec-local: #Specify what Automake needs to create: first the H5fort_type_defines.h # header, then H5match_types which includes that header, then # it needs to run H5match_types. -H5fortran_types.f90 H5f90i_gen.h: H5match_types$(EXEEXT) +H5fortran_types.F90 H5f90i_gen.h: H5match_types$(EXEEXT) $(RUNSERIAL) ./H5match_types$(EXEEXT) -# H5fort_type_defines.h is created by running H5fortran_detect. -# Obviously, H5fortran_detect needs to be built first. -H5fort_type_defines.h: H5fortran_detect$(EXEEXT) - $(RUNSERIAL) ./H5fortran_detect$(EXEEXT) > H5fort_type_defines.h - -H5match_types.$(OBJEXT): H5fort_type_defines.h - -# H5test_kind.f90 generates H5Fortran_detect.f90 depending on if -# intrinsic function SIZEOF is available. +# H5_buildiface.F90 generates all the APIs that have a KIND type associated +# with them. -H5fortran_detect.f90: H5test_kind$(EXEEXT) - $(RUNSERIAL) ./H5test_kind$(EXEEXT) > H5fortran_detect.f90 +H5_gen.F90: H5_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5_buildiface$(EXEEXT) # Hardcode the dependencies of these files. There isn't a known way of # determining this automagically (like we do with the C files). So, when # doing a parallel make, some modules could be made way before the # modules they depend upon are actually made. *sigh* -H5f90global.lo: $(srcdir)/H5f90global.f90 H5fortran_types.lo -H5fortran_types.lo: H5fortran_types.f90 -H5fortran_detect.lo: H5fortran_detect.f90 -H5test_kind.lo: $(srcdir)/H5test_kind.f90 -H5test_kind_SIZEOF.lo: $(srcdir)/H5test_kind_SIZEOF.f90 -H5_ff$(F_STATUS).lo: $(srcdir)/H5_ff$(F_STATUS).f90 H5f90global.lo -H5_ff.lo: $(srcdir)/H5_ff.f90 H5f90global.lo H5_ff$(F_STATUS).lo -H5Aff.lo: $(srcdir)/H5Aff.f90 H5f90global.lo -H5Dff.lo: $(srcdir)/H5Dff.f90 H5f90global.lo -H5Aff$(F_STATUS).lo: $(srcdir)/H5Aff$(F_STATUS).f90 H5f90global.lo -H5Dff$(F_STATUS).lo: $(srcdir)/H5Dff$(F_STATUS).f90 H5f90global.lo -H5Eff$(F_STATUS).lo: $(srcdir)/H5Eff$(F_STATUS).f90 H5f90global.lo -H5Fff$(F_STATUS).lo: $(srcdir)/H5Fff$(F_STATUS).f90 H5f90global.lo -H5Lff$(F_STATUS).lo: $(srcdir)/H5Lff$(F_STATUS).f90 H5f90global.lo -H5Off$(F_STATUS).lo: $(srcdir)/H5Off$(F_STATUS).f90 H5f90global.lo -H5Pff$(F_STATUS).lo: $(srcdir)/H5Pff$(F_STATUS).f90 H5f90global.lo -H5Rff$(F_STATUS).lo: $(srcdir)/H5Rff$(F_STATUS).f90 H5f90global.lo -H5Tff$(F_STATUS).lo: $(srcdir)/H5Tff$(F_STATUS).f90 H5f90global.lo -H5Eff.lo: $(srcdir)/H5Eff.f90 H5f90global.lo -H5Fff.lo: $(srcdir)/H5Fff.f90 H5f90global.lo -H5Gff.lo: $(srcdir)/H5Gff.f90 H5f90global.lo -H5Iff.lo: $(srcdir)/H5Iff.f90 H5f90global.lo -H5Lff.lo: $(srcdir)/H5Lff.f90 H5f90global.lo -H5Off.lo: $(srcdir)/H5Off.f90 H5f90global.lo -H5Pff.lo: $(srcdir)/H5Pff.f90 H5f90global.lo -H5Rff.lo: $(srcdir)/H5Rff.f90 H5f90global.lo -H5Sff.lo: $(srcdir)/H5Sff.f90 H5f90global.lo -H5Tff.lo: $(srcdir)/H5Tff.f90 H5f90global.lo -H5Zff.lo: $(srcdir)/H5Zff.f90 H5f90global.lo -H5_DBLE_Interface$(F_DBLE).lo: $(srcdir)/H5_DBLE_Interface$(F_DBLE).f90 H5Aff$(F_STATUS).lo H5Dff$(F_STATUS).lo H5Fff$(F_STATUS).lo H5Eff$(F_STATUS).lo H5Pff$(F_STATUS).lo -HDF5.lo: $(srcdir)/HDF5.f90 H5f90global.lo H5_ff$(F_STATUS).lo H5_ff.lo H5Aff.lo H5Aff$(F_STATUS).lo \ - H5Dff.lo H5Dff$(F_STATUS).lo \ - H5Eff.lo H5Eff$(F_STATUS).lo \ - H5Fff.lo H5Fff$(F_STATUS).lo H5Gff.lo H5Iff.lo H5Lff.lo H5Lff$(F_STATUS).lo \ - H5Off.lo H5Off$(F_STATUS).lo H5Pff.lo H5Pff$(F_STATUS).lo H5Rff$(F_STATUS).lo H5Rff.lo \ - H5Sff.lo H5Tff.lo H5Tff$(F_STATUS).lo H5Zff.lo \ - H5_DBLE_Interface$(F_DBLE).lo -H5FDmpioff.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo -HDF5mpio.lo: $(srcdir)/H5FDmpioff.f90 H5f90global.lo H5_ff$(F_STATUS).lo H5_ff.lo \ - H5Aff.lo H5Aff$(F_STATUS).lo \ - H5Dff.lo H5Dff$(F_STATUS).lo \ - H5Eff.lo H5Eff$(F_STATUS).lo \ - H5Fff.lo H5Fff$(F_STATUS).lo H5Gff.lo H5Iff.lo H5Lff.lo H5Lff$(F_STATUS).lo \ - H5Off.lo H5Off$(F_STATUS).lo H5Pff.lo H5Pff$(F_STATUS).lo H5Rff$(F_STATUS).lo H5Rff.lo \ - H5Sff.lo H5Tff.lo H5Tff$(F_STATUS).lo H5Zff.lo \ - H5_DBLE_Interface$(F_DBLE).lo H5FDmpioff.lo +H5f90global.lo: $(srcdir)/H5f90global.F90 H5fortran_types.lo +H5_buildiface.lo: $(srcdir)/H5_buildiface.F90 +H5_ff.lo: $(srcdir)/H5_ff.F90 H5f90global.lo +H5Aff.lo: $(srcdir)/H5Aff.F90 H5f90global.lo +H5Dff.lo: $(srcdir)/H5Dff.F90 H5f90global.lo +H5Eff.lo: $(srcdir)/H5Eff.F90 H5f90global.lo +H5Fff.lo: $(srcdir)/H5Fff.F90 H5f90global.lo +H5Gff.lo: $(srcdir)/H5Gff.F90 H5f90global.lo +H5Iff.lo: $(srcdir)/H5Iff.F90 H5f90global.lo +H5Lff.lo: $(srcdir)/H5Lff.F90 H5f90global.lo +H5Off.lo: $(srcdir)/H5Off.F90 H5f90global.lo +H5Pff.lo: $(srcdir)/H5Pff.F90 H5f90global.lo +H5Rff.lo: $(srcdir)/H5Rff.F90 H5f90global.lo +H5Sff.lo: $(srcdir)/H5Sff.F90 H5f90global.lo +H5Tff.lo: $(srcdir)/H5Tff.F90 H5f90global.lo +H5Zff.lo: $(srcdir)/H5Zff.F90 H5f90global.lo +H5_gen.lo: H5_gen.F90 H5f90global.lo H5Aff.lo H5Dff.lo H5Pff.lo +HDF5.lo: $(srcdir)/HDF5.F90 H5f90global.lo H5_ff.lo H5Aff.lo \ + H5Dff.lo \ + H5Eff.lo \ + H5Fff.lo H5Gff.lo H5Iff.lo H5Lff.lo \ + H5Off.lo H5Pff.lo H5Rff.lo \ + H5Sff.lo H5Tff.lo H5Zff.lo H5_gen.lo # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. diff --git a/fortran/src/hdf5_fortrandll.def.in b/fortran/src/hdf5_fortrandll.def.in index 48fb343..7b218ca 100644 --- a/fortran/src/hdf5_fortrandll.def.in +++ b/fortran/src/hdf5_fortrandll.def.in @@ -7,99 +7,13 @@ H5LIB_mp_H5CHECK_VERSION_F H5LIB_mp_H5GARBAGE_COLLECT_F H5LIB_mp_H5DONT_ATEXIT_F H5LIB_mp_H5KIND_TO_TYPE -@H5_NOF03EXP@H5LIB_PROVISIONAL_mp_H5OFFSETOF -; H5_DBLE_INTERFACE -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_SCALAR -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_1 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_2 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_3 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_4 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_5 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_6 -H5_DBLE_INTERFACE_mp_H5AREAD_DOUBLE_7 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_SCALAR -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_1 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_2 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_3 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_4 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_5 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_6 -H5_DBLE_INTERFACE_mp_H5AWRITE_DOUBLE_7 -H5_DBLE_INTERFACE_mp_H5DFILL_DOUBLE -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_SCALAR -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_1 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_2 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_3 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_4 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_5 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_6 -H5_DBLE_INTERFACE_mp_H5DREAD_DOUBLE_7 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_SCALAR -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_1 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_2 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_3 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_4 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_5 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_6 -H5_DBLE_INTERFACE_mp_H5DWRITE_DOUBLE_7 -H5_DBLE_INTERFACE_mp_H5PGET_DOUBLE -H5_DBLE_INTERFACE_mp_H5PSET_DOUBLE -H5_DBLE_INTERFACE_mp_H5PSET_FILL_VALUE_DOUBLE -H5_DBLE_INTERFACE_mp_H5PGET_FILL_VALUE_DOUBLE -H5_DBLE_INTERFACE_mp_H5PINSERT_DOUBLE -H5_DBLE_INTERFACE_mp_H5PREGISTER_DOUBLE +H5LIB_mp_H5OFFSETOF ; H5A +H5A_mp_H5AWRITE_CHAR_SCALAR +H5A_mp_H5AREAD_CHAR_SCALAR H5A_mp_H5ACREATE_F H5A_mp_H5AOPEN_NAME_F H5A_mp_H5AOPEN_IDX_F -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_SCALAR -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_1 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_2 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_3 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_4 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_5 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_6 -H5A_PROVISIONAL_mp_H5AWRITE_INTEGER_7 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_SCALAR -H5A_PROVISIONAL_mp_H5AWRITE_REAL_1 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_2 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_3 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_4 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_5 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_6 -H5A_PROVISIONAL_mp_H5AWRITE_REAL_7 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_SCALAR -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_1 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_2 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_3 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_4 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_5 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_6 -H5A_PROVISIONAL_mp_H5AWRITE_CHAR_7 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_SCALAR -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_1 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_2 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_3 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_4 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_5 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_6 -H5A_PROVISIONAL_mp_H5AREAD_INTEGER_7 -H5A_PROVISIONAL_mp_H5AREAD_REAL_SCALAR -H5A_PROVISIONAL_mp_H5AREAD_REAL_1 -H5A_PROVISIONAL_mp_H5AREAD_REAL_2 -H5A_PROVISIONAL_mp_H5AREAD_REAL_3 -H5A_PROVISIONAL_mp_H5AREAD_REAL_4 -H5A_PROVISIONAL_mp_H5AREAD_REAL_5 -H5A_PROVISIONAL_mp_H5AREAD_REAL_6 -H5A_PROVISIONAL_mp_H5AREAD_REAL_7 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_SCALAR -H5A_PROVISIONAL_mp_H5AREAD_CHAR_1 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_2 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_3 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_4 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_5 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_6 -H5A_PROVISIONAL_mp_H5AREAD_CHAR_7 H5A_mp_H5AGET_SPACE_F H5A_mp_H5AGET_TYPE_F H5A_mp_H5AGET_NAME_F @@ -122,64 +36,16 @@ H5A_mp_H5AEXISTS_F H5A_mp_H5AEXISTS_BY_NAME_F H5A_mp_H5AOPEN_BY_NAME_F H5A_mp_H5ARENAME_F -@H5_NOF03EXP@H5A_PROVISIONAL_mp_H5AWRITE_PTR -@H5_NOF03EXP@H5A_PROVISIONAL_mp_H5AREAD_PTR ; H5D H5D_mp_H5DCREATE_F H5D_mp_H5DOPEN_F H5D_mp_H5DCLOSE_F -H5D_PROVISIONAL_mp_H5DWRITE_REFERENCE_OBJ -H5D_PROVISIONAL_mp_H5DWRITE_REFERENCE_DSETREG -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_SCALAR -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_1 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_2 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_3 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_4 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_5 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_6 -H5D_PROVISIONAL_mp_H5DWRITE_INTEGER_7 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_SCALAR -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_1 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_2 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_3 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_4 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_5 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_6 -H5D_PROVISIONAL_mp_H5DWRITE_CHAR_7 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_SCALAR -H5D_PROVISIONAL_mp_H5DWRITE_REAL_1 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_2 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_3 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_4 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_5 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_6 -H5D_PROVISIONAL_mp_H5DWRITE_REAL_7 -H5D_PROVISIONAL_mp_H5DREAD_REFERENCE_OBJ -H5D_PROVISIONAL_mp_H5DREAD_REFERENCE_DSETREG -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_SCALAR -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_1 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_2 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_3 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_4 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_5 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_6 -H5D_PROVISIONAL_mp_H5DREAD_INTEGER_7 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_SCALAR -H5D_PROVISIONAL_mp_H5DREAD_CHAR_1 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_2 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_3 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_4 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_5 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_6 -H5D_PROVISIONAL_mp_H5DREAD_CHAR_7 -H5D_PROVISIONAL_mp_H5DREAD_REAL_SCALAR -H5D_PROVISIONAL_mp_H5DREAD_REAL_1 -H5D_PROVISIONAL_mp_H5DREAD_REAL_2 -H5D_PROVISIONAL_mp_H5DREAD_REAL_3 -H5D_PROVISIONAL_mp_H5DREAD_REAL_4 -H5D_PROVISIONAL_mp_H5DREAD_REAL_5 -H5D_PROVISIONAL_mp_H5DREAD_REAL_6 -H5D_PROVISIONAL_mp_H5DREAD_REAL_7 +H5D_mp_H5DWRITE_REFERENCE_OBJ +H5D_mp_H5DWRITE_REFERENCE_DSETREG +H5D_mp_H5DWRITE_CHAR_SCALAR +H5D_mp_H5DREAD_REFERENCE_OBJ +H5D_mp_H5DREAD_REFERENCE_DSETREG +H5D_mp_H5DREAD_CHAR_SCALAR H5D_mp_H5DGET_SPACE_F H5D_mp_H5DGET_TYPE_F H5D_mp_H5DSET_EXTENT_F @@ -192,9 +58,8 @@ H5D_mp_H5DWRITE_VL_REAL H5D_mp_H5DREAD_VL_REAL H5D_mp_H5DWRITE_VL_STRING H5D_mp_H5DREAD_VL_STRING -H5D_PROVISIONAL_mp_H5DFILL_INTEGER -H5D_PROVISIONAL_mp_H5DFILL_REAL -H5D_PROVISIONAL_mp_H5DFILL_CHAR +H5D_mp_H5DFILL_CHAR +H5D_mp_H5DFILL_INTEGER H5D_mp_H5DGET_SPACE_STATUS_F H5D_mp_H5DCREATE_ANON_F H5D_mp_H5DGET_SPACE_F @@ -204,15 +69,15 @@ H5D_mp_H5DGET_CREATE_PLIST_F H5D_mp_H5DGET_STORAGE_SIZE_F H5D_mp_H5DVLEN_GET_MAX_LEN_F H5D_mp_H5DGET_ACCESS_PLIST_F -@H5_NOF03EXP@H5D_PROVISIONAL_mp_H5DWRITE_PTR -@H5_NOF03EXP@H5D_PROVISIONAL_mp_H5DREAD_PTR -@H5_NOF03EXP@H5D_PROVISIONAL_mp_H5DVLEN_RECLAIM_F +H5D_mp_H5DWRITE_PTR +H5D_mp_H5DREAD_PTR +H5D_mp_H5DVLEN_RECLAIM_F ; H5E H5E_mp_H5ECLEAR_F H5E_mp_H5EPRINT_F H5E_mp_H5EGET_MAJOR_F H5E_mp_H5EGET_MINOR_F -H5E_PROVISIONAL_mp_H5ESET_AUTO_F +H5E_mp_H5ESET_AUTO_F ; H5F H5F_mp_H5FCREATE_F H5F_mp_H5FFLUSH_F @@ -229,7 +94,7 @@ H5F_mp_H5FGET_ACCESS_PLIST_F H5F_mp_H5FIS_HDF5_F H5F_mp_H5FGET_NAME_F H5F_mp_H5FGET_FILESIZE_F -@H5_NOF03EXP@H5F_PROVISIONAL_mp_H5FGET_FILE_IMAGE_F +H5F_mp_H5FGET_FILE_IMAGE_F ; H5G H5G_mp_H5GOPEN_F H5G_mp_H5GCREATE_F @@ -291,8 +156,8 @@ H5L_mp_H5LGET_INFO_BY_IDX_F H5L_mp_H5LIS_REGISTERED_F H5L_mp_H5LMOVE_F H5L_mp_H5LGET_NAME_BY_IDX_F -@H5_NOF03EXP@H5L_PROVISIONAL_mp_H5LITERATE_F -@H5_NOF03EXP@H5L_PROVISIONAL_mp_H5LITERATE_BY_NAME_F +H5L_mp_H5LITERATE_F +H5L_mp_H5LITERATE_BY_NAME_F ; H5O H5O_mp_H5OCLOSE_F H5O_mp_H5OCOPY_F @@ -307,11 +172,11 @@ H5O_mp_H5OOPEN_BY_IDX_F H5O_mp_H5OOPEN_F H5O_mp_H5OSET_COMMENT_F H5O_mp_H5OSET_COMMENT_BY_NAME_F -@H5_NOF03EXP@H5O_PROVISIONAL_mp_H5OGET_INFO_BY_IDX_F -@H5_NOF03EXP@H5O_PROVISIONAL_mp_H5OGET_INFO_BY_NAME_F -@H5_NOF03EXP@H5O_PROVISIONAL_mp_H5OGET_INFO_F -@H5_NOF03EXP@H5O_PROVISIONAL_mp_H5OVISIT_BY_NAME_F -@H5_NOF03EXP@H5O_PROVISIONAL_mp_H5OVISIT_F +H5O_mp_H5OGET_INFO_BY_IDX_F +H5O_mp_H5OGET_INFO_BY_NAME_F +H5O_mp_H5OGET_INFO_F +H5O_mp_H5OVISIT_BY_NAME_F +H5O_mp_H5OVISIT_F ; H5P H5P_mp_H5PCREATE_F H5P_mp_H5PSET_PRESERVE_F @@ -322,12 +187,10 @@ H5P_mp_H5PCLOSE_F H5P_mp_H5PSET_CHUNK_F H5P_mp_H5PGET_CHUNK_F H5P_mp_H5PSET_DEFLATE_F -H5P_PROVISIONAL_mp_H5PSET_FILL_VALUE_INTEGER -H5P_PROVISIONAL_mp_H5PGET_FILL_VALUE_INTEGER -H5P_PROVISIONAL_mp_H5PSET_FILL_VALUE_REAL -H5P_PROVISIONAL_mp_H5PGET_FILL_VALUE_REAL -H5P_PROVISIONAL_mp_H5PSET_FILL_VALUE_CHAR -H5P_PROVISIONAL_mp_H5PGET_FILL_VALUE_CHAR +H5P_mp_H5PSET_FILL_VALUE_CHAR +H5P_mp_H5PGET_FILL_VALUE_CHAR +H5P_mp_H5PSET_FILL_VALUE_INTEGER +H5P_mp_H5PGET_FILL_VALUE_INTEGER H5P_mp_H5PGET_VERSION_F H5P_mp_H5PSET_USERBLOCK_F H5P_mp_H5PGET_USERBLOCK_F @@ -379,12 +242,10 @@ H5P_mp_H5PSET_SMALL_DATA_BLOCK_SIZE_F H5P_mp_H5PGET_SMALL_DATA_BLOCK_SIZE_F H5P_mp_H5PSET_HYPER_VECTOR_SIZE_F H5P_mp_H5PGET_HYPER_VECTOR_SIZE_F -H5P_PROVISIONAL_mp_H5PSET_INTEGER -H5P_PROVISIONAL_mp_H5PSET_REAL -H5P_PROVISIONAL_mp_H5PSET_CHAR -H5P_PROVISIONAL_mp_H5PGET_INTEGER -H5P_PROVISIONAL_mp_H5PGET_REAL -H5P_PROVISIONAL_mp_H5PGET_CHAR +H5P_mp_H5PSET_CHAR +H5P_mp_H5PSET_INTEGER +H5P_mp_H5PGET_CHAR +H5P_mp_H5PGET_INTEGER H5P_mp_H5PEXIST_F H5P_mp_H5PGET_SIZE_F H5P_mp_H5PGET_NPROPS_F @@ -395,13 +256,11 @@ H5P_mp_H5PCOPY_PROP_F H5P_mp_H5PREMOVE_F H5P_mp_H5PUNREGISTER_F H5P_mp_H5PCLOSE_CLASS_F -H5P_PROVISIONAL_mp_H5PCREATE_CLASS_F -H5P_PROVISIONAL_mp_H5PREGISTER_INTEGER -H5P_PROVISIONAL_mp_H5PREGISTER_REAL -H5P_PROVISIONAL_mp_H5PREGISTER_CHAR -H5P_PROVISIONAL_mp_H5PINSERT_INTEGER -H5P_PROVISIONAL_mp_H5PINSERT_REAL -H5P_PROVISIONAL_mp_H5PINSERT_CHAR +H5P_mp_H5PCREATE_CLASS_F +H5P_mp_H5PREGISTER_INTEGER +H5P_mp_H5PREGISTER_CHAR +H5P_mp_H5PINSERT_CHAR +H5P_mp_H5PINSERT_INTEGER H5P_mp_H5PSET_SHUFFLE_F H5P_mp_H5PSET_EDC_CHECK_F H5P_mp_H5PGET_EDC_CHECK_F @@ -448,28 +307,34 @@ H5P_mp_H5PGET_NLINKS_F H5P_mp_H5PGET_CREATE_INTER_GROUP_F H5P_mp_H5PSET_CHUNK_CACHE_F H5P_mp_H5PGET_CHUNK_CACHE_F -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PSET_FILL_VALUE_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PGET_FILL_VALUE_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PSET_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PGET_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PREGISTER_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PINSERT_PTR -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PGET_FILE_IMAGE_F -@H5_NOF03EXP@H5P_PROVISIONAL_mp_H5PSET_FILE_IMAGE_F +H5P_mp_H5PSET_FILL_VALUE_PTR +H5P_mp_H5PGET_FILL_VALUE_PTR +H5P_mp_H5PSET_PTR +H5P_mp_H5PGET_PTR +H5P_mp_H5PREGISTER_PTR +H5P_mp_H5PINSERT_PTR +H5P_mp_H5PGET_FILE_IMAGE_F +H5P_mp_H5PSET_FILE_IMAGE_F +; Parallel +@H5_NOPAREXP@H5P_mp_H5PSET_FAPL_MPIO_F +@H5_NOPAREXP@H5P_mp_H5PGET_FAPL_MPIO_F +@H5_NOPAREXP@H5P_mp_H5PSET_DXPL_MPIO_F +@H5_NOPAREXP@H5P_mp_H5PGET_DXPL_MPIO_F +@H5_NOPAREXP@H5P_mp_H5PGET_MPIO_ACTUAL_IO_MODE_F ; H5R -H5R_PROVISIONAL_mp_H5RCREATE_OBJECT_F -H5R_PROVISIONAL_mp_H5RCREATE_REGION_F -H5R_PROVISIONAL_mp_H5RDEREFERENCE_OBJECT_F -H5R_PROVISIONAL_mp_H5RDEREFERENCE_REGION_F -H5R_PROVISIONAL_mp_H5RGET_REGION_REGION_F +H5R_mp_H5RCREATE_OBJECT_F +H5R_mp_H5RCREATE_REGION_F +H5R_mp_H5RDEREFERENCE_OBJECT_F +H5R_mp_H5RDEREFERENCE_REGION_F +H5R_mp_H5RGET_REGION_REGION_F H5R_mp_H5RGET_OBJECT_TYPE_OBJ_F -H5R_PROVISIONAL_mp_H5RGET_NAME_OBJECT_F -H5R_PROVISIONAL_mp_H5RGET_NAME_REGION_F -@H5_NOF03EXP@H5R_PROVISIONAL_mp_H5RGET_REGION_PTR_F -@H5_NOF03EXP@H5R_PROVISIONAL_mp_H5RCREATE_PTR_F -@H5_NOF03EXP@H5R_PROVISIONAL_mp_H5RDEREFERENCE_PTR_F -@H5_NOF03EXP@H5R_PROVISIONAL_mp_H5RGET_NAME_PTR_F -@H5_NOF03EXP@H5R_PROVISIONAL_mp_H5RGET_OBJ_TYPE_F +H5R_mp_H5RGET_NAME_OBJECT_F +H5R_mp_H5RGET_NAME_REGION_F +H5R_mp_H5RGET_REGION_PTR_F +H5R_mp_H5RCREATE_PTR_F +H5R_mp_H5RDEREFERENCE_PTR_F +H5R_mp_H5RGET_NAME_PTR_F +H5R_mp_H5RGET_OBJ_TYPE_F ; H5S H5S_mp_H5SCREATE_SIMPLE_F H5S_mp_H5SCLOSE_F @@ -558,17 +423,10 @@ H5T_mp_H5TENCODE_F H5T_mp_H5TGET_CREATE_PLIST_F H5T_mp_H5TCOMPILER_CONV_F H5T_mp_H5TGET_NATIVE_TYPE_F -@H5_NOF03EXP@H5T_PROVISIONAL_mp_H5TCONVERT_F -@H5_F03EXP@H5T_PROVISIONAL_mp_H5TENUM_INSERT_F -@H5_NOF03EXP@H5T_PROVISIONAL_mp_H5TENUM_INSERT_F90 -@H5_NOF03EXP@H5T_PROVISIONAL_mp_H5TENUM_INSERT_F03 +H5T_mp_H5TCONVERT_F +H5T_mp_H5TENUM_INSERT_F90 +H5T_mp_H5TENUM_INSERT_F03 ; H5Z H5Z_mp_H5ZUNREGISTER_F H5Z_mp_H5ZFILTER_AVAIL_F H5Z_mp_H5ZGET_FILTER_INFO_F -; Parallel -@H5_NOPAREXP@H5FDMPIO_mp_H5PSET_FAPL_MPIO_F -@H5_NOPAREXP@H5FDMPIO_mp_H5PGET_FAPL_MPIO_F -@H5_NOPAREXP@H5FDMPIO_mp_H5PSET_DXPL_MPIO_F -@H5_NOPAREXP@H5FDMPIO_mp_H5PGET_DXPL_MPIO_F -@H5_NOPAREXP@H5FDMPIO_mp_H5PGET_MPIO_ACTUAL_IO_MODE_F diff --git a/fortran/test/H5_test_buildiface.F90 b/fortran/test/H5_test_buildiface.F90 new file mode 100644 index 0000000..30687df --- /dev/null +++ b/fortran/test/H5_test_buildiface.F90 @@ -0,0 +1,306 @@ +!****p* Program/H5_buildiface +! +! NAME +! Executable: H5_buildiface +! +! FILE +! fortran/src/H5_buildiface.f90 +! +! PURPOSE +! This stand alone program is used at build time to generate the program +! H5fortran_detect.f90. It cycles through all the available KIND parameters for +! integers and reals. The appropriate program and subroutines are then generated +! depending on which of the KIND values are found. +! +! NOTES +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of +! STORAGE_SIZE/SIZEOF in H5fortran_detect.f90. STORAGE_SIZE is standard +! compliant and should always be chosen over SIZEOF. +! +! The availability of STORAGE_SIZE/SIZEOF is checked at configure time and the TRUE/FALSE +! condition is set in the configure variable "FORTRAN_HAVE_STORAGE_SIZE" or +! "FORTRAN_HAVE_SIZEOF". +! +! The use of C_SIZOF(X) is not used since the argument X must be an interoperable +! data entity. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! AUTHOR +! M. Scot Breitenfeld +! +!***** + +#include + +PROGRAM H5_test_buildiface + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + +! These values are valid REAL KINDs (with corresponding C float) found during configure + H5_H5CONFIG_F_NUM_RKIND + H5_H5CONFIG_F_RKIND +! These values are valid INTEGER KINDs (with corresponding C integer) found during configure + H5_H5CONFIG_F_NUM_IKIND + H5_H5CONFIG_F_IKIND + + INTEGER :: i, j, k + INTEGER :: ji, jr, jd +#ifdef H5_FORTRAN_HAVE_C_LONG_DOUBLE + REAL(KIND=C_LONG_DOUBLE) :: c_longdble +#endif + REAL(KIND=C_DOUBLE) :: c_dble + REAL(KIND=C_FLOAT) :: c_flt + INTEGER :: sizeof_var + CHARACTER(LEN=2) :: chr2 +! subroutine rank of array being passed in + CHARACTER(LEN=2), DIMENSION(1:8), PARAMETER :: chr_rank=(/"_0","_1","_2","_3","_4","_5","_6","_7"/) +! rank definitions + CHARACTER(LEN=70), DIMENSION(1:8), PARAMETER :: rank_dim_line=(/ & + ' ', & + ', DIMENSION(dims(1)) ', & + ', DIMENSION(dims(1),dims(2)) ', & + ', DIMENSION(dims(1),dims(2),dims(3)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7))' & + /) +! pointer to the buffer + CHARACTER(LEN=37), DIMENSION(1:8), PARAMETER :: f_ptr_line=(/ & + ' f_ptr = C_LOC(buf) ', & + ' f_ptr = C_LOC(buf(1)) ', & + ' f_ptr = C_LOC(buf(1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1,1))' & + /) + +! Generate Fortran Check routines for the tests KIND interfaces. + + OPEN(11,FILE='tf_gen.F90') + WRITE(11,'(40(A,/))') & +'!****h* ROBODoc/TH5_MISC_gen.F90',& +'!',& +'! NAME',& +'! TH5_MISC_gen',& +'! ',& +'! PURPOSE',& +'! This module is generated at build by H5_test_buildiface.F90 to handle checking ',& +'! in the tests all the detected KINDs.',& +'!',& +'! COPYRIGHT',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'! Copyright by The HDF Group. *',& +'! All rights reserved. *',& +'! *',& +'! This file is part of HDF5. The full HDF5 copyright notice, including *',& +'! terms governing use, modification, and redistribution, is contained in *',& +'! the files COPYING and Copyright.html. COPYING can be found at the root *',& +'! of the source code distribution tree; Copyright.html can be found at the *',& +'! root level of an installed copy of the electronic HDF5 document set and *',& +'! is linked from the top-level documents page. It can also be found at *',& +'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& +'! access to either file, you may request a copy from help@hdfgroup.org. *',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'!',& +'! AUTHOR',& +'! H5_test_buildiface.F90',& +'!',& +'!*****' + + WRITE(11,'(a)') "MODULE TH5_MISC_gen" + + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + +! Interfaces for validating REALs, INTEGERs, CHARACTERs, LOGICALs + + WRITE(11,'(A)') ' INTERFACE verify' + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE verify_real_kind_"//TRIM(ADJUSTL(chr2)) + END DO + DO i = 1, num_ikinds + j = ikind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE verify_integer_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " MODULE PROCEDURE verify_character" + WRITE(11,'(A)') " MODULE PROCEDURE verify_logical" + WRITE(11,'(A)') " END INTERFACE" + + WRITE(11,'(A)') ' INTERFACE check_real_eq' + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + WRITE(11,'(A)') " MODULE PROCEDURE real_eq_kind_"//TRIM(ADJUSTL(chr2)) + END DO + WRITE(11,'(A)') " END INTERFACE" + + WRITE(11,'(A)') 'CONTAINS' + +! *************************** +! VALIDATE INTEGERS +! *************************** + DO i = 1, num_ikinds + k = ikind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_integer_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE verify_integer_kind_'//TRIM(ADJUSTL(chr2))//'(string,value,correct_value,total_error)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' CHARACTER(LEN=*) :: string' + WRITE(11,'(A)') ' INTEGER(KIND='//TRIM(ADJUSTL(chr2))//') :: value, correct_value' + WRITE(11,'(A)') ' INTEGER :: total_error' + WRITE(11,'(A)') ' IF (value .NE. correct_value) THEN' + WRITE(11,'(A)') ' total_error=total_error+1' + WRITE(11,'(A)') ' WRITE(*,*) "ERROR: INCORRECT INTEGER VALIDATION ", string' + WRITE(11,'(A)') ' ENDIF' + WRITE(11,'(A)') ' END SUBROUTINE verify_integer_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! *************************** +! VALIDATE REALS +! *************************** + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_real_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE verify_real_kind_'//TRIM(ADJUSTL(chr2))//'(string,value,correct_value,total_error)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' CHARACTER(LEN=*) :: string' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//') :: value, correct_value' + WRITE(11,'(A)') ' INTEGER :: total_error' + WRITE(11,'(A)') ' IF (.NOT.real_eq_kind_'//TRIM(ADJUSTL(chr2))//'( value, correct_value) ) THEN' + WRITE(11,'(A)') ' total_error=total_error+1' + WRITE(11,'(A)') ' WRITE(*,*) "ERROR: INCORRECT REAL VALIDATION ", string' + WRITE(11,'(A)') ' ENDIF' + WRITE(11,'(A)') ' END SUBROUTINE verify_real_kind_'//TRIM(ADJUSTL(chr2)) + + +! *********************************** +! TEST IF TWO REAL NUMBERS ARE EQUAL +! *********************************** + +! [1] The test performed is +! +! ABS( x - y ) < ( ULP * SPACING( MAX(ABS(x),ABS(y)) ) ) +! +! The numbers are considered equal if true +! +! The intrinsic function SPACING(x) returns the absolute spacing of numbers +! near the value of x, +! +! { EXPONENT(x)-DIGITS(x) +! { 2.0 for x /= 0 +! SPACING(x) = { +! { +! { TINY(x) for x == 0 +! +! The ULP optional argument scales the comparison: +! +! Unit of data precision. The acronym stands for "unit in +! the last place," the smallest possible increment or decrement +! that can be made using a machine's floating point arithmetic. +! A 0.5 ulp maximum error is the best you could hope for, since +! this corresponds to always rounding to the nearest representable +! floating-point number. Value must be positive - if a negative +! value is supplied, the absolute value is used. +! If not specified, the default value is 1. +! +! James Van Buskirk and James Giles suggested this method for floating +! point comparisons in the comp.lang.fortran newsgroup. +! +! Reference: [1] Paul van Delst, paul.vandelst@ssec.wisc.edu + + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: real_eq_kind_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') '!DEC$endif' + WRITE(11,'(A)') ' LOGICAL FUNCTION real_eq_kind_'//TRIM(ADJUSTL(chr2))//'(a,b,ulp)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT (in):: a,b' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//') :: Rel' + WRITE(11,'(A)') ' INTEGER, OPTIONAL, INTENT( IN ) :: ulp' + WRITE(11,'(A)') ' IF ( PRESENT( ulp ) ) Rel = REAL( ABS(ulp), '//TRIM(ADJUSTL(chr2))//')' + WRITE(11,'(A)') ' Rel = 1.0_'//TRIM(ADJUSTL(chr2)) + WRITE(11,'(A)') ' real_eq_kind_'//TRIM(ADJUSTL(chr2))//' = ABS( a - b ) < ( Rel * SPACING( MAX(ABS(a),ABS(b)) ) )' + WRITE(11,'(A)') ' END FUNCTION real_eq_kind_'//TRIM(ADJUSTL(chr2)) + ENDDO + +! *************************** +! VALIDATE CHARACTER STRINGS +! *************************** + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_character' + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE verify_character(string,value,correct_value,total_error)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' CHARACTER*(*) :: string' + WRITE(11,'(A)') ' CHARACTER*(*) :: value, correct_value' + WRITE(11,'(A)') ' INTEGER :: total_error' + WRITE(11,'(A)') ' IF (TRIM(value) .NE. TRIM(correct_value)) THEN' + WRITE(11,'(A)') ' total_error = total_error + 1' + WRITE(11,'(A)') ' WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string' + WRITE(11,'(A)') ' ENDIF' + WRITE(11,'(A)') ' END SUBROUTINE verify_character' + +! *************************** +! VALIDATE LOGICAL +! *************************** + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_TEST_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: verify_logical' + WRITE(11,'(A)') '!DEC$endif' +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE verify_logical(string,value,correct_value,total_error)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' CHARACTER(LEN=*) :: string' + WRITE(11,'(A)') ' LOGICAL :: value, correct_value' + WRITE(11,'(A)') ' INTEGER :: total_error' + WRITE(11,'(A)') ' IF (value .NEQV. correct_value) THEN' + WRITE(11,'(A)') ' total_error = total_error + 1' + WRITE(11,'(A)') ' WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string' + WRITE(11,'(A)') ' ENDIF' + + WRITE(11,'(A)') ' END SUBROUTINE verify_logical' + + WRITE(11,'(A)') "END MODULE TH5_MISC_gen" + + CLOSE(11) + +END PROGRAM H5_test_buildiface + + + diff --git a/fortran/test/Makefile.am b/fortran/test/Makefile.am index 735ab7a..608b1e9 100644 --- a/fortran/test/Makefile.am +++ b/fortran/test/Makefile.am @@ -36,40 +36,12 @@ else AM_LDFLAGS+=-static endif -# Check if the compiler supports the Fortran 2003 standard -# which should include the intrinsic module iso_c_binding -if FORTRAN_2003_CONDITIONAL_F - ff_PREFIX = F03 -else - ff_PREFIX = F90 -endif - # Our main targets, the tests themselves -TEST_PROG=fortranlib_test fflush1 fflush2 fortranlib_test_1_8 - -if FORTRAN_2003_CONDITIONAL_F - TEST_PROG += fortranlib_test_F03 -endif +TEST_PROG=fortranlib_test fflush1 fflush2 fortranlib_test_1_8 fortranlib_test_F03 check_PROGRAMS=$(TEST_PROG) -if FORTRAN_HAVE_STORAGE_SIZE -if FORTRAN_HAVE_C_SIZEOF - libh5test_fortran_la_SOURCES = tf_F08.f90 -else - libh5test_fortran_la_SOURCES = tf_F03.f90 -endif -else -if FORTRAN_2003_CONDITIONAL_F - libh5test_fortran_la_SOURCES = tf_F03.f90 -else - libh5test_fortran_la_SOURCES = tf_F90.f90 -endif -endif - -# tf.f90 depends on either tf_F08.f90 or tf_F03.f90 so they need to be -# compiled first -libh5test_fortran_la_SOURCES += tf.f90 t.c +libh5test_fortran_la_SOURCES = tf_gen.F90 tf.F90 t.c # Source files are used for both the library and fortranlib_test. # Automake will complain about this without the following workaround. @@ -79,13 +51,11 @@ fortranlib_test_CFLAGS=$(AM_CFLAGS) fortranlib_test_SOURCES = tH5F.f90 tH5D.f90 tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 \ tH5Sselect.f90 tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tHDF5.f90 fortranlib_test.f90 -fortranlib_test_1_8_SOURCES = tH5O.f90 tH5A_1_8.f90 tH5G_1_8.f90 tH5MISC_1_8.f90 tHDF5_1_8.f90\ +fortranlib_test_1_8_SOURCES = tH5O.f90 tH5A_1_8.f90 tH5G_1_8.f90 tH5MISC_1_8.f90 tHDF5_1_8.f90 \ fortranlib_test_1_8.f90 -if FORTRAN_2003_CONDITIONAL_F - fortranlib_test_F03_SOURCES = tH5E_F03.f90 tH5F_F03.f90 tH5L_F03.f90 \ - tH5O_F03.f90 tH5P_F03.f90 tH5T_F03.f90 tHDF5_F03.f90 fortranlib_test_F03.f90 -endif +fortranlib_test_F03_SOURCES = tH5E_F03.f90 tH5F_F03.f90 tH5L_F03.f90 \ + tH5O_F03.f90 tH5P_F03.f90 tH5T_F03.F90 tHDF5_F03.f90 fortranlib_test_F03.f90 fflush1_SOURCES=fflush1.f90 @@ -106,13 +76,32 @@ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ - $(RM) *.$(F9XMODEXT); \ + $(RM) *.$(F9XMODEXT) tf_gen.F90; \ fi # Mark this directory as part of the Fortran API (this affects output # from tests in conclude.am) FORTRAN_API=yes +# helper program we need to build. +noinst_PROGRAMS = H5_test_buildiface + +# H5_test_buildiface.F90 generates all the test APIs that have a KIND type associated +# with them. + +tf_gen.F90: H5_test_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5_test_buildiface$(EXEEXT) + +# H5_test_buildiface.F90 is included in the distribution, and Automake knows +# how to compile a fortran program given its sources. + +H5_test_buildiface_SOURCES = H5_test_buildiface.F90 + +# The build of the H5_test_buildiface does depend on any libraries, so set it +# to nothing. + +H5_test_buildiface_LDADD = + # fflush2 depends on files created by fflush1 fflush2.chkexe_: fflush1.chkexe_ diff --git a/fortran/test/Makefile.in b/fortran/test/Makefile.in index 4ec1ad5..4e9bbd6 100644 --- a/fortran/test/Makefile.in +++ b/fortran/test/Makefile.in @@ -14,6 +14,7 @@ @SET_MAKE@ + VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ @@ -87,9 +88,9 @@ DIST_COMMON = $(top_srcdir)/config/commence.am \ # want to build a shared C library and a static Fortran library. If so, # pass the -static flag to the library linker. @FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static -@FORTRAN_2003_CONDITIONAL_F_TRUE@am__append_2 = fortranlib_test_F03 -check_PROGRAMS = $(am__EXEEXT_2) -TESTS = $(am__EXEEXT_2) +check_PROGRAMS = $(am__EXEEXT_1) +noinst_PROGRAMS = H5_test_buildiface$(EXEEXT) +TESTS = $(am__EXEEXT_1) subdir = fortran/test ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ @@ -97,34 +98,25 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) libh5test_fortran_la_LIBADD = -am__libh5test_fortran_la_SOURCES_DIST = tf_F90.f90 tf.f90 t.c \ - tf_F03.f90 tf_F08.f90 -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@am_libh5test_fortran_la_OBJECTS = tf_F90.lo \ -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ tf.lo \ -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ t.lo -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@am_libh5test_fortran_la_OBJECTS = tf_F03.lo \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ tf.lo \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ t.lo -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@am_libh5test_fortran_la_OBJECTS = tf_F03.lo \ -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ tf.lo \ -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ t.lo -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@am_libh5test_fortran_la_OBJECTS = tf_F08.lo \ -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ tf.lo \ -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ t.lo +am_libh5test_fortran_la_OBJECTS = tf_gen.lo tf.lo t.lo libh5test_fortran_la_OBJECTS = $(am_libh5test_fortran_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = -@FORTRAN_2003_CONDITIONAL_F_TRUE@am__EXEEXT_1 = \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ fortranlib_test_F03$(EXEEXT) -am__EXEEXT_2 = fortranlib_test$(EXEEXT) fflush1$(EXEEXT) \ - fflush2$(EXEEXT) fortranlib_test_1_8$(EXEEXT) $(am__EXEEXT_1) +am__EXEEXT_1 = fortranlib_test$(EXEEXT) fflush1$(EXEEXT) \ + fflush2$(EXEEXT) fortranlib_test_1_8$(EXEEXT) \ + fortranlib_test_F03$(EXEEXT) +PROGRAMS = $(noinst_PROGRAMS) +am_H5_test_buildiface_OBJECTS = H5_test_buildiface.$(OBJEXT) +H5_test_buildiface_OBJECTS = $(am_H5_test_buildiface_OBJECTS) +H5_test_buildiface_DEPENDENCIES = am_fflush1_OBJECTS = fflush1.$(OBJEXT) fflush1_OBJECTS = $(am_fflush1_OBJECTS) fflush1_LDADD = $(LDADD) @@ -159,18 +151,10 @@ fortranlib_test_1_8_OBJECTS = $(am_fortranlib_test_1_8_OBJECTS) fortranlib_test_1_8_LDADD = $(LDADD) fortranlib_test_1_8_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) \ $(LIBH5F) $(LIBHDF5) -am__fortranlib_test_F03_SOURCES_DIST = tH5E_F03.f90 tH5F_F03.f90 \ - tH5L_F03.f90 tH5O_F03.f90 tH5P_F03.f90 tH5T_F03.f90 \ - tHDF5_F03.f90 fortranlib_test_F03.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@am_fortranlib_test_F03_OBJECTS = \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5E_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5F_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5L_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5O_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5P_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5T_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tHDF5_F03.$(OBJEXT) \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ fortranlib_test_F03.$(OBJEXT) +am_fortranlib_test_F03_OBJECTS = tH5E_F03.$(OBJEXT) tH5F_F03.$(OBJEXT) \ + tH5L_F03.$(OBJEXT) tH5O_F03.$(OBJEXT) tH5P_F03.$(OBJEXT) \ + tH5T_F03.$(OBJEXT) tHDF5_F03.$(OBJEXT) \ + fortranlib_test_F03.$(OBJEXT) fortranlib_test_F03_OBJECTS = $(am_fortranlib_test_F03_OBJECTS) fortranlib_test_F03_LDADD = $(LDADD) fortranlib_test_F03_DEPENDENCIES = libh5test_fortran.la $(LIBH5TEST) \ @@ -187,10 +171,28 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f +PPFCCOMPILE = $(FC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS) +LTPPFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(FC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_FCFLAGS) $(FCFLAGS) +AM_V_PPFC = $(am__v_PPFC_@AM_V@) +am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@) +am__v_PPFC_0 = @echo " PPFC " $@; +am__v_PPFC_1 = +FCLD = $(FC) +FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_FCLD = $(am__v_FCLD_@AM_V@) +am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) +am__v_FCLD_0 = @echo " FCLD " $@; +am__v_FCLD_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ @@ -216,21 +218,14 @@ AM_V_FC = $(am__v_FC_@AM_V@) am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@) am__v_FC_0 = @echo " FC " $@; am__v_FC_1 = -FCLD = $(FC) -FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_FCLD = $(am__v_FCLD_@AM_V@) -am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) -am__v_FCLD_0 = @echo " FCLD " $@; -am__v_FCLD_1 = -SOURCES = $(libh5test_fortran_la_SOURCES) $(fflush1_SOURCES) \ +SOURCES = $(libh5test_fortran_la_SOURCES) \ + $(H5_test_buildiface_SOURCES) $(fflush1_SOURCES) \ + $(fflush2_SOURCES) $(fortranlib_test_SOURCES) \ + $(fortranlib_test_1_8_SOURCES) $(fortranlib_test_F03_SOURCES) +DIST_SOURCES = $(libh5test_fortran_la_SOURCES) \ + $(H5_test_buildiface_SOURCES) $(fflush1_SOURCES) \ $(fflush2_SOURCES) $(fortranlib_test_SOURCES) \ $(fortranlib_test_1_8_SOURCES) $(fortranlib_test_F03_SOURCES) -DIST_SOURCES = $(am__libh5test_fortran_la_SOURCES_DIST) \ - $(fflush1_SOURCES) $(fflush2_SOURCES) \ - $(fortranlib_test_SOURCES) $(fortranlib_test_1_8_SOURCES) \ - $(am__fortranlib_test_F03_SOURCES_DIST) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -522,14 +517,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -539,13 +541,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -587,6 +588,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ @@ -732,39 +745,10 @@ CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.raw # The Fortran test library noinst_LTLIBRARIES = libh5test_fortran.la -@FORTRAN_2003_CONDITIONAL_F_FALSE@ff_PREFIX = F90 - -# Check if the compiler supports the Fortran 2003 standard -# which should include the intrinsic module iso_c_binding -@FORTRAN_2003_CONDITIONAL_F_TRUE@ff_PREFIX = F03 # Our main targets, the tests themselves -TEST_PROG = fortranlib_test fflush1 fflush2 fortranlib_test_1_8 \ - $(am__append_2) - -# tf.f90 depends on either tf_F08.f90 or tf_F03.f90 so they need to be -# compiled first -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@libh5test_fortran_la_SOURCES = tf_F90.f90 \ -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ tf.f90 \ -@FORTRAN_2003_CONDITIONAL_F_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ t.c - -# tf.f90 depends on either tf_F08.f90 or tf_F03.f90 so they need to be -# compiled first -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@libh5test_fortran_la_SOURCES = tf_F03.f90 \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ tf.f90 \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_FALSE@ t.c - -# tf.f90 depends on either tf_F08.f90 or tf_F03.f90 so they need to be -# compiled first -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@libh5test_fortran_la_SOURCES = tf_F03.f90 \ -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ tf.f90 \ -@FORTRAN_HAVE_C_SIZEOF_FALSE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ t.c - -# tf.f90 depends on either tf_F08.f90 or tf_F03.f90 so they need to be -# compiled first -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@libh5test_fortran_la_SOURCES = tf_F08.f90 \ -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ tf.f90 \ -@FORTRAN_HAVE_C_SIZEOF_TRUE@@FORTRAN_HAVE_STORAGE_SIZE_TRUE@ t.c +TEST_PROG = fortranlib_test fflush1 fflush2 fortranlib_test_1_8 fortranlib_test_F03 +libh5test_fortran_la_SOURCES = tf_gen.F90 tf.F90 t.c # Source files are used for both the library and fortranlib_test. # Automake will complain about this without the following workaround. @@ -773,11 +757,11 @@ fortranlib_test_CFLAGS = $(AM_CFLAGS) fortranlib_test_SOURCES = tH5F.f90 tH5D.f90 tH5R.f90 tH5S.f90 tH5T.f90 tH5VL.f90 tH5Z.f90 \ tH5Sselect.f90 tH5P.f90 tH5A.f90 tH5I.f90 tH5G.f90 tH5E.f90 tHDF5.f90 fortranlib_test.f90 -fortranlib_test_1_8_SOURCES = tH5O.f90 tH5A_1_8.f90 tH5G_1_8.f90 tH5MISC_1_8.f90 tHDF5_1_8.f90\ +fortranlib_test_1_8_SOURCES = tH5O.f90 tH5A_1_8.f90 tH5G_1_8.f90 tH5MISC_1_8.f90 tHDF5_1_8.f90 \ fortranlib_test_1_8.f90 -@FORTRAN_2003_CONDITIONAL_F_TRUE@fortranlib_test_F03_SOURCES = tH5E_F03.f90 tH5F_F03.f90 tH5L_F03.f90 \ -@FORTRAN_2003_CONDITIONAL_F_TRUE@ tH5O_F03.f90 tH5P_F03.f90 tH5T_F03.f90 tHDF5_F03.f90 fortranlib_test_F03.f90 +fortranlib_test_F03_SOURCES = tH5E_F03.f90 tH5F_F03.f90 tH5L_F03.f90 \ + tH5O_F03.f90 tH5P_F03.f90 tH5T_F03.F90 tHDF5_F03.f90 fortranlib_test_F03.f90 fflush1_SOURCES = fflush1.f90 fflush2_SOURCES = fflush2.f90 @@ -790,6 +774,14 @@ MOSTLYCLEANFILES = *.tmp # from tests in conclude.am) FORTRAN_API = yes +# H5_test_buildiface.F90 is included in the distribution, and Automake knows +# how to compile a fortran program given its sources. +H5_test_buildiface_SOURCES = H5_test_buildiface.F90 + +# The build of the H5_test_buildiface does depend on any libraries, so set it +# to nothing. +H5_test_buildiface_LDADD = + # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and @@ -812,7 +804,7 @@ TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: -.SUFFIXES: .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs +.SUFFIXES: .F90 .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -868,6 +860,19 @@ clean-checkPROGRAMS: echo " rm -f" $$list; \ rm -f $$list +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +H5_test_buildiface$(EXEEXT): $(H5_test_buildiface_OBJECTS) $(H5_test_buildiface_DEPENDENCIES) $(EXTRA_H5_test_buildiface_DEPENDENCIES) + @rm -f H5_test_buildiface$(EXEEXT) + $(AM_V_FCLD)$(FCLINK) $(H5_test_buildiface_OBJECTS) $(H5_test_buildiface_LDADD) $(LIBS) + fflush1$(EXEEXT): $(fflush1_OBJECTS) $(fflush1_DEPENDENCIES) $(EXTRA_fflush1_DEPENDENCIES) @rm -f fflush1$(EXEEXT) $(AM_V_FCLD)$(FCLINK) $(fflush1_OBJECTS) $(fflush1_LDADD) $(LIBS) @@ -896,6 +901,15 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t.Plo@am__quote@ +.F90.o: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ $< + +.F90.obj: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.F90.lo: + $(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $< + .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @@ -1288,7 +1302,7 @@ check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am -all-am: Makefile $(LTLIBRARIES) all-local +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local installdirs: install: install-am install-exec: install-exec-am @@ -1327,7 +1341,7 @@ maintainer-clean-generic: clean: clean-am clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \ - clean-noinstLTLIBRARIES mostlyclean-am + clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) @@ -1400,19 +1414,19 @@ uninstall-am: .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ check-am clean clean-checkPROGRAMS clean-generic clean-libtool \ - clean-local clean-noinstLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-local distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic maintainer-clean-local mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \ - uninstall uninstall-am + clean-local clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ + cscopelist-am ctags ctags-am distclean distclean-compile \ + distclean-generic distclean-libtool distclean-local \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-local mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ + pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am # @@ -1453,9 +1467,15 @@ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ - $(RM) *.$(F9XMODEXT); \ + $(RM) *.$(F9XMODEXT) tf_gen.F90; \ fi +# H5_test_buildiface.F90 generates all the test APIs that have a KIND type associated +# with them. + +tf_gen.F90: H5_test_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5_test_buildiface$(EXEEXT) + # fflush2 depends on files created by fflush1 fflush2.chkexe_: fflush1.chkexe_ diff --git a/fortran/test/fflush2.f90 b/fortran/test/fflush2.f90 index 04ce439..4230832 100644 --- a/fortran/test/fflush2.f90 +++ b/fortran/test/fflush2.f90 @@ -27,152 +27,151 @@ ! !***** - PROGRAM FFLUSH2EXAMPLE - - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - - IMPLICIT NONE - - CHARACTER(LEN=7), PARAMETER :: filename = "fflush1" - CHARACTER(LEN=80) :: fix_filename - - ! - !data space rank and dimensions - ! - INTEGER, PARAMETER :: NX = 4 - INTEGER, PARAMETER :: NY = 5 - - ! - ! File identifiers - ! - INTEGER(HID_T) :: file_id - - ! - ! Group identifier - ! - INTEGER(HID_T) :: gid - - ! - ! dataset identifier - ! - INTEGER(HID_T) :: dset_id - - - ! - ! data type identifier - ! - INTEGER(HID_T) :: dtype_id - - ! - !flag to check operation success - ! - INTEGER :: error - - ! - !general purpose integer - ! - INTEGER :: i, j, total_error = 0 - - ! - !data buffers - ! - INTEGER, DIMENSION(NX,NY) :: data_out - INTEGER(HSIZE_T), DIMENSION(2) :: data_dims - data_dims(1) = NX - data_dims(2) = NY - - ! - !Initialize FORTRAN predifined datatypes - ! - CALL h5open_f(error) - CALL check("h5open_f",error,total_error) - - ! - !Open the file. - ! - CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) - if (error .ne. 0) then - write(*,*) "Cannot modify filename" - CALL h5_exit_f (1) - endif - CALL h5fopen_f(fix_filename, H5F_ACC_RDONLY_F, file_id, error) - CALL check("h5fopen_f",error,total_error) - - ! - !Open the dataset - ! - CALL h5dopen_f(file_id, "/D", dset_id, error) - CALL check("h5dopen_f",error,total_error) - - ! - !Get dataset's data type. - ! - CALL h5dget_type_f(dset_id, dtype_id, error) - CALL check("h5dget_type_f",error,total_error) - - ! - !Read the dataset. - ! - CALL h5dread_f(dset_id, dtype_id, data_out, data_dims, error) - CALL check("h5dread_f",error,total_error) - - ! - !Print the dataset. - ! - do i = 1, NX - write(*,*) (data_out(i,j), j = 1, NY) - end do -! -!result of the print statement -! -! 0, 1, 2, 3, 4 -! 1, 2, 3, 4, 5 -! 2, 3, 4, 5, 6 -! 3, 4, 5, 6, 7 - - ! - !Open the group. - ! - CALL h5gopen_f(file_id, "G", gid, error) - CALL check("h5gopen_f",error,total_error) - - ! - !In case error happens, exit. - ! - IF (error == -1) CALL h5_exit_f (1) - ! - !Close the datatype - ! - CALL h5tclose_f(dtype_id, error) - CALL check("h5tclose_f",error,total_error) - - ! - !Close the dataset. - ! - CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f",error,total_error) - - ! - !Close the group. - ! - CALL h5gclose_f(gid, error) - CALL check("h5gclose_f",error,total_error) - - ! - !Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f",error,total_error) - - ! - !Close FORTRAN predifined datatypes - ! - CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) - CALL h5close_f(error) - CALL check("h5close_types_f",error,total_error) - - ! if errors detected, exit with non-zero code. - IF (total_error .ne. 0) CALL h5_exit_f (1) - - END PROGRAM FFLUSH2EXAMPLE +PROGRAM FFLUSH2EXAMPLE + + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + + IMPLICIT NONE + + CHARACTER(LEN=7), PARAMETER :: filename = "fflush1" + CHARACTER(LEN=80) :: fix_filename + + ! + !data space rank and dimensions + ! + INTEGER, PARAMETER :: NX = 4 + INTEGER, PARAMETER :: NY = 5 + + ! + ! File identifiers + ! + INTEGER(HID_T) :: file_id + + ! + ! Group identifier + ! + INTEGER(HID_T) :: gid + + ! + ! dataset identifier + ! + INTEGER(HID_T) :: dset_id + + + ! + ! data type identifier + ! + INTEGER(HID_T) :: dtype_id + + ! + !flag to check operation success + ! + INTEGER :: error + + ! + !general purpose integer + ! + INTEGER :: i, j, total_error = 0 + + ! + !data buffers + ! + INTEGER, DIMENSION(NX,NY) :: data_out + INTEGER(HSIZE_T), DIMENSION(2) :: data_dims + data_dims(1) = NX + data_dims(2) = NY + + ! + !Initialize FORTRAN predifined datatypes + ! + CALL h5open_f(error) + CALL check("h5open_f",error,total_error) + + ! + !Open the file. + ! + CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) + IF (error .NE. 0) THEN + WRITE(*,*) "Cannot modify filename" + CALL h5_exit_f (1) + ENDIF + CALL h5fopen_f(fix_filename, H5F_ACC_RDONLY_F, file_id, error) + CALL check("h5fopen_f",error,total_error) + + ! + !Open the dataset + ! + CALL h5dopen_f(file_id, "/D", dset_id, error) + CALL check("h5dopen_f",error,total_error) + + ! + !Get dataset's data type. + ! + CALL h5dget_type_f(dset_id, dtype_id, error) + CALL check("h5dget_type_f",error,total_error) + ! + !Read the dataset. + ! + CALL h5dread_f(dset_id, dtype_id, data_out, data_dims, error) + CALL check("h5dread_f",error,total_error) + + ! + !Print the dataset. + ! + DO i = 1, NX + WRITE(*,*) (data_out(i,j), j = 1, NY) + END DO + ! + !result of the print statement + ! + ! 0, 1, 2, 3, 4 + ! 1, 2, 3, 4, 5 + ! 2, 3, 4, 5, 6 + ! 3, 4, 5, 6, 7 + + ! + !Open the group. + ! + CALL h5gopen_f(file_id, "G", gid, error) + CALL check("h5gopen_f",error,total_error) + + ! + !In case error happens, exit. + ! + IF (error == -1) CALL h5_exit_f (1) + ! + !Close the datatype + ! + CALL h5tclose_f(dtype_id, error) + CALL check("h5tclose_f",error,total_error) + + ! + !Close the dataset. + ! + CALL h5dclose_f(dset_id, error) + CALL check("h5dclose_f",error,total_error) + + ! + !Close the group. + ! + CALL h5gclose_f(gid, error) + CALL check("h5gclose_f",error,total_error) + + ! + !Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f",error,total_error) + + ! + !Close FORTRAN predifined datatypes + ! + CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) + CALL h5close_f(error) + CALL check("h5close_types_f",error,total_error) + + ! if errors detected, exit with non-zero code. + IF (total_error .ne. 0) CALL h5_exit_f (1) + +END PROGRAM FFLUSH2EXAMPLE diff --git a/fortran/test/tH5A.f90 b/fortran/test/tH5A.f90 index e3b3b2a..5b814fa 100644 --- a/fortran/test/tH5A.f90 +++ b/fortran/test/tH5A.f90 @@ -29,6 +29,10 @@ !***** MODULE TH5A + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE attribute_test(cleanup, total_error) @@ -36,9 +40,6 @@ CONTAINS ! h5acreate_f, h5awrite_f, h5aclose_f,h5aread_f, h5aopen_name_f, ! h5aget_name_f,h5aget_space_f, h5aget_type_f, ! - - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error @@ -309,7 +310,7 @@ CONTAINS ! CALL h5aget_storage_size_f(attr_id, attr_storage, error) CALL check("h5aget_storage_size_f",error,total_error) -! CALL VERIFY("h5aget_storage_size_f",attr_storage,*SizeOf(attr_storage),total_error) +! CALL verify("h5aget_storage_size_f",attr_storage,*SizeOf(attr_storage),total_error) CALL h5aget_storage_size_f(attr2_id, attr_storage, error) CALL check("h5aget_storage_size_f",error,total_error) ! CALL verify("h5aget_storage_size_f",attr_storage,1,total_error) @@ -517,21 +518,15 @@ CONTAINS data_dims(1) = 1 CALL h5aread_f(attr3_id, H5T_NATIVE_DOUBLE, aread_double_data, data_dims, error) CALL check("h5aread_f",error,total_error) + CALL VERIFY("Read back double attrbute is wrong", aread_double_data(1),3.459_Fortran_DOUBLE,total_error) - IF( .NOT.dreal_eq( REAL(aread_double_data(1),dp), 3.459_dp) )THEN - WRITE(*,*) "Read back double attrbute is wrong", aread_double_data(1) - total_error = total_error + 1 - ENDIF ! !read the real attribute data back to memory ! data_dims(1) = 1 CALL h5aread_f(attr4_id, H5T_NATIVE_REAL, aread_real_data, data_dims, error) CALL check("h5aread_f",error,total_error) - IF( .NOT.dreal_eq( REAL(aread_real_data(1),dp), 4.0_dp) )THEN - WRITE(*,*) "Read back real attrbute is wrong", aread_real_data(1) - total_error = total_error + 1 - ENDIF + CALL VERIFY("Read back real attrbute is wrong", aread_real_data(1),4.0,total_error) ! !read the Integer attribute data back to memory ! diff --git a/fortran/test/tH5A_1_8.f90 b/fortran/test/tH5A_1_8.f90 index 8e20100..c70e288 100644 --- a/fortran/test/tH5A_1_8.f90 +++ b/fortran/test/tH5A_1_8.f90 @@ -32,6 +32,10 @@ !***** MODULE TH5A_1_8 + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE attribute_test_1_8(cleanup, total_error) @@ -41,8 +45,6 @@ SUBROUTINE attribute_test_1_8(cleanup, total_error) ! H5Pset_shared_mesg_index_f ! - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -199,8 +201,6 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) ! Needed for get_info_by_name - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE @@ -350,7 +350,7 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) ! Verify creation order of attribute - CALL verifyLogical("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) + CALL verify("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) CALL verify("H5Aget_info_by_name_f", corder, u, total_error) @@ -363,7 +363,7 @@ SUBROUTINE test_attr_corder_create_compact(fcpl,fapl, total_error) ! Verify creation order of attribute - CALL verifyLogical("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) + CALL verify("H5Aget_info_by_name_f", f_corder_valid, .TRUE., total_error) CALL verify("H5Aget_info_by_name_f", corder, u, total_error) END DO @@ -389,8 +389,7 @@ SUBROUTINE test_attr_null_space(fcpl, fapl, total_error) !** Tests storing attribute with "null" dataspace !** !*************************************************************** - USE HDF5 - USE TH5_MISC + IMPLICIT NONE @@ -473,22 +472,22 @@ SUBROUTINE test_attr_null_space(fcpl, fapl, total_error) CALL H5Sextent_equal_f(attr_sid, null_sid, equal, error) CALL check("H5Sextent_equal_f",error,total_error) - CALL Verifylogical("H5Sextent_equal_f",equal,.TRUE.,total_error) + CALL verify("H5Sextent_equal_f",equal,.TRUE.,total_error) CALL h5aget_storage_size_f(attr, storage_size, error) CALL check("h5aget_storage_size_f",error,total_error) - CALL VERIFY("h5aget_storage_size_f",INT(storage_size),0,total_error) + CALL verify("h5aget_storage_size_f",INT(storage_size),0,total_error) CALL h5aget_info_f(attr, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f", error, total_error) ! Check the attribute's information - CALL VERIFY("h5aget_info_f.corder",corder,0,total_error) + CALL verify("h5aget_info_f.corder",corder,0,total_error) - CALL VERIFY("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) + CALL verify("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) CALL h5aget_storage_size_f(attr, storage_size, error) CALL check("h5aget_storage_size_f",error,total_error) - CALL VERIFY("h5aget_info_f.data_size", INT(data_size), INT(storage_size), total_error) + CALL verify("h5aget_info_f.data_size", INT(data_size), INT(storage_size), total_error) CALL h5aclose_f(attr,error) CALL check("h5aclose_f",error,total_error) @@ -520,9 +519,6 @@ SUBROUTINE test_attr_create_by_name(new_format,fcpl,fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(SIZE_T), PARAMETER :: NAME_BUF_SIZE = 7 @@ -735,9 +731,6 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE LOGICAL :: new_format @@ -859,24 +852,24 @@ SUBROUTINE test_attr_info_by_idx(new_format, fcpl, fapl, total_error) CALL h5aget_info_by_idx_f(my_dataset, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, 0_hsize_t, & f_corder_valid, corder, cset, data_size, error, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("h5aget_info_by_idx_f",error,minusone,total_error) + CALL verify("h5aget_info_by_idx_f",error,minusone,total_error) ! 2) call by passing an integer with the INT(,hsize_t) declaration CALL h5aget_info_by_idx_f(my_dataset, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(0,hsize_t), & f_corder_valid, corder, cset, data_size, error, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("h5aget_info_by_idx_f",error,minusone,total_error) + CALL verify("h5aget_info_by_idx_f",error,minusone,total_error) ! 3) call by passing a variable with the attribute hsize_t CALL h5aget_info_by_idx_f(my_dataset, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, hzero, & f_corder_valid, corder, cset, data_size, error, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("h5aget_info_by_idx_f",error,minusone,total_error) + CALL verify("h5aget_info_by_idx_f",error,minusone,total_error) CALL h5aget_name_by_idx_f(my_dataset, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, & hzero, tmpname, error, size, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("h5aget_name_by_idx_f",error,minusone,total_error) + CALL verify("h5aget_name_by_idx_f",error,minusone,total_error) ! Create attributes, up to limit of compact form @@ -941,9 +934,6 @@ END SUBROUTINE test_attr_info_by_idx SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER :: error, total_error @@ -974,7 +964,7 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) ! Verify the name for new link, in increasing creation order @@ -983,12 +973,12 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) CALL h5aget_name_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, & n, tmpname, error, NAME_BUF_SIZE) CALL check("h5aget_name_by_idx_f",error,total_error) - CALL VERIFY("h5aget_name_by_idx_f", INT(NAME_BUF_SIZE), 7, error) + CALL verify("h5aget_name_by_idx_f", INT(NAME_BUF_SIZE), 7, error) IF(attrname.NE.tmpname)THEN error = -1 ENDIF - CALL VERIFY("h5aget_name_by_idx_f",error,0,total_error) + CALL verify("h5aget_name_by_idx_f",error,0,total_error) ! Don't test "native" order if there is no creation order index, since ! * there's not a good way to easily predict the attribute's order in the name @@ -999,13 +989,13 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,0,total_error) + CALL verify("h5aget_info_by_idx_f",corder,0,total_error) ! Verify the information for new attribute, in native creation order CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, n, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) ! Verify the name for new link, in increasing native order CALL h5aget_name_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_NATIVE_F, & @@ -1015,14 +1005,14 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) WRITE(*,*) "ERROR: attribute name size wrong!" error = -1 ENDIF - CALL VERIFY("h5aget_name_by_idx_f",error,0,total_error) + CALL verify("h5aget_name_by_idx_f",error,0,total_error) END IF CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_DEC_F, n, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,0,total_error) + CALL verify("h5aget_info_by_idx_f",corder,0,total_error) !EP CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_DEC_F, 0_HSIZE_T, & @@ -1033,41 +1023,41 @@ SUBROUTINE attr_info_by_idx_check(obj_id, attrname, n, use_index, total_error ) CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_DEC_F, 0_HSIZE_T, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) ! 2) call by passing an integer with the INT(,hsize_t) declaration CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_DEC_F, INT(0,HSIZE_T), & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) ! 3) call by passing a variable with the attribute hsize_t CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_DEC_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) !EP CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_INC_F, 0_HSIZE_T, & CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_INC_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,0,total_error) + CALL verify("h5aget_info_by_idx_f",corder,0,total_error) CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_INC_F, n, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_DEC_F, n, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,0,total_error) + CALL verify("h5aget_info_by_idx_f",corder,0,total_error) !EP CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_DEC_F, 0_HSIZE_T, & CALL h5aget_info_by_idx_f(obj_id, ".", H5_INDEX_NAME_F, H5_ITER_DEC_F, hzero, & f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_by_idx_f",error,total_error) - CALL VERIFY("h5aget_info_by_idx_f",corder,INT(n),total_error) + CALL verify("h5aget_info_by_idx_f",corder,INT(n),total_error) END SUBROUTINE attr_info_by_idx_check @@ -1082,9 +1072,6 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fcpl @@ -1371,7 +1358,7 @@ SUBROUTINE test_attr_shared_rename( fcpl, fapl, total_error) ! Check size of file !filesize = h5_get_file_size(FILENAME); - !VERIFY(filesize, empty_filesize, "h5_get_file_size"); + !verify(filesize, empty_filesize, "h5_get_file_size"); ENDDO ! Close dataspaces @@ -1392,9 +1379,6 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE LOGICAL, INTENT(IN) :: new_format @@ -1518,7 +1502,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ! Check for deleting non-existant attribute !EP CALL H5Adelete_by_idx_f(my_dataset, '.', idx_type, order, 0_HSIZE_T,error, lapl_id=H5P_DEFAULT_F) CALL H5Adelete_by_idx_f(my_dataset, '.', idx_type, order, hzero,error, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("H5Adelete_by_idx_f",error,minusone,total_error) + CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ! Create attributes, up to limit of compact form DO u = 0, max_compact - 1 @@ -1546,7 +1530,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ! Check for out of bound deletions CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(u,HSIZE_T), error, lapl_id=H5P_DEFAULT_F) - CALL VERIFY("H5Adelete_by_idx_f",error,minusone,total_error) + CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ENDDO @@ -1584,10 +1568,10 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) IF(new_format)THEN IF(order.EQ.H5_ITER_INC_F)THEN - CALL VERIFY("H5Aget_info_by_idx_f",corder,u + 1,total_error) + CALL verify("H5Aget_info_by_idx_f",corder,u + 1,total_error) ENDIF ELSE - CALL VERIFY("H5Aget_info_by_idx_f",corder, max_compact-(u + 2),total_error) + CALL verify("H5Aget_info_by_idx_f",corder, max_compact-(u + 2),total_error) ENDIF ! Verify the name for first attribute in appropriate order @@ -1604,7 +1588,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) attrname = 'attr '//chr2 ENDIF IF(TRIM(attrname).NE.TRIM(tmpname)) error = -1 - CALL VERIFY("h5aget_name_by_idx_f",error,0,total_error) + CALL verify("h5aget_name_by_idx_f",error,0,total_error) ENDDO ! Delete last attribute @@ -1655,7 +1639,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ENDDO ! Check for out of bound deletion CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(u,HSIZE_T), error) - CALL VERIFY("H5Adelete_by_idx_f",error,minusone,total_error) + CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ENDDO ! Work on all the datasets @@ -1684,10 +1668,10 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) f_corder_valid, corder, cset, data_size, error) IF(new_format)THEN IF(order.EQ.H5_ITER_INC_F)THEN - CALL VERIFY("H5Aget_info_by_idx_f",corder,u + 1,total_error) + CALL verify("H5Aget_info_by_idx_f",corder,u + 1,total_error) ENDIF ELSE - CALL VERIFY("H5Aget_info_by_idx_f",corder, ((max_compact * 2) - (u + 2)), total_error) + CALL verify("H5Aget_info_by_idx_f",corder, ((max_compact * 2) - (u + 2)), total_error) ENDIF ! Verify the name for first attribute in appropriate order @@ -1705,7 +1689,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) attrname = 'attr '//chr2 ENDIF IF(TRIM(attrname).NE.TRIM(tmpname)) error = -1 - CALL VERIFY("h5aget_name_by_idx_f",error,0,total_error) + CALL verify("h5aget_name_by_idx_f",error,0,total_error) ENDDO @@ -1716,7 +1700,7 @@ SUBROUTINE test_attr_delete_by_idx(new_format, fcpl, fapl, total_error) ! Check for deletion on empty attribute storage again CALL H5Adelete_by_idx_f(my_dataset, ".", idx_type, order, INT(0,HSIZE_T), error) - CALL VERIFY("H5Adelete_by_idx_f",error,minusone,total_error) + CALL verify("H5Adelete_by_idx_f",error,minusone,total_error) ENDDO ! Close Datasets @@ -1753,9 +1737,6 @@ SUBROUTINE test_attr_shared_delete(fcpl, fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fcpl @@ -2030,9 +2011,6 @@ SUBROUTINE test_attr_dense_open( fcpl, fapl, total_error) !** !*************************************************************** - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fcpl @@ -2169,7 +2147,7 @@ SUBROUTINE test_attr_dense_open( fcpl, fapl, total_error) ! Check size of file ! filesize = h5_get_file_size(FILENAME); - ! VERIFY(filesize, empty_filesize, "h5_get_file_size") + ! verify(filesize, empty_filesize, "h5_get_file_size") END SUBROUTINE test_attr_dense_open @@ -2182,9 +2160,6 @@ END SUBROUTINE test_attr_dense_open SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: loc_id @@ -2227,7 +2202,7 @@ SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) CALL h5aread_f(attr, H5T_NATIVE_INTEGER, value, data_dims, error) CALL CHECK("H5Aread_F", error, total_error) - CALL VERIFY("H5Aread_F", value, u, total_error) + CALL verify("H5Aread_F", value, u, total_error) ! Close attribute CALL h5aclose_f(attr, error) @@ -2259,7 +2234,7 @@ SUBROUTINE test_attr_dense_verify(loc_id, max_attr, total_error) data_dims(1) = 1 CALL h5aread_f(attr, H5T_NATIVE_INTEGER, value, data_dims, error) CALL CHECK("H5Aread_f", error, total_error) - CALL VERIFY("H5Aread_f", value, u, total_error) + CALL verify("H5Aread_f", value, u, total_error) ! Close attribute @@ -2278,9 +2253,6 @@ END SUBROUTINE test_attr_dense_verify SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fcpl @@ -2314,14 +2286,14 @@ SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) ! Get creation order indexing on object CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) - CALL VERIFY("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) + CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) ! Setting invalid combination of a attribute order creation order indexing on should fail CALL H5Pset_attr_creation_order_f(dcpl, H5P_CRT_ORDER_INDEXED_F, error) - CALL VERIFY("H5Pset_attr_creation_order_f",error , minusone, total_error) + CALL verify("H5Pset_attr_creation_order_f",error , minusone, total_error) CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) - CALL VERIFY("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) + CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , 0, total_error) ! Set attribute creation order tracking & indexing for object CALL h5pset_attr_creation_order_f(dcpl, IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), error) @@ -2329,7 +2301,7 @@ SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) - CALL VERIFY("H5Pget_attr_creation_order_f",crt_order_flags , & + CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , & IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), total_error) ! Create dataspace for dataset @@ -2374,7 +2346,7 @@ SUBROUTINE test_attr_corder_create_basic( fcpl, fapl, total_error ) ! Query the attribute creation properties CALL H5Pget_attr_creation_order_f(dcpl, crt_order_flags, error) CALL check("H5Pget_attr_creation_order_f",error,total_error) - CALL VERIFY("H5Pget_attr_creation_order_f",crt_order_flags , & + CALL verify("H5Pget_attr_creation_order_f",crt_order_flags , & IOR(H5P_CRT_ORDER_TRACKED_F, H5P_CRT_ORDER_INDEXED_F), total_error ) ! Close property list @@ -2401,9 +2373,6 @@ END SUBROUTINE test_attr_corder_create_basic SUBROUTINE test_attr_basic_write(fapl, total_error) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fapl @@ -2512,7 +2481,7 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) CALL h5aget_storage_size_f(attr, attr_size, error) CALL check("h5aget_storage_size_f",error,total_error) -!EP CALL VERIFY("h5aget_storage_size_f", INT(attr_size), 2*HSIZE_T, total_error) +!EP CALL verify("h5aget_storage_size_f", INT(attr_size), 2*HSIZE_T, total_error) ! Read attribute information immediately, without closing attribute @@ -2521,7 +2490,7 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) ! Verify values read in DO i = 1, ATTR1_DIM1 - CALL VERIFY('h5aread_f',attr_data1(i),read_data1(i), total_error) + CALL verify('h5aread_f',attr_data1(i),read_data1(i), total_error) ENDDO ! CLOSE attribute @@ -2570,7 +2539,7 @@ SUBROUTINE test_attr_basic_write(fapl, total_error) size = 18 CALL H5Aget_name_f(attr, size, chr_exact_size, error) CALL check('H5Aget_name_f',error,total_error) - CALL VerifyString('H5Aget_name_f',chr_exact_size,ATTR_TMP_NAME, total_error) + CALL verify('H5Aget_name_f',chr_exact_size,ATTR_TMP_NAME, total_error) ! Close attribute CALL h5aclose_f(attr, error) @@ -2599,9 +2568,6 @@ END SUBROUTINE test_attr_basic_write SUBROUTINE test_attr_many(new_format, fcpl, fapl, total_error) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE LOGICAL, INTENT(IN) :: new_format @@ -2656,19 +2622,19 @@ SUBROUTINE test_attr_many(new_format, fcpl, fapl, total_error) WRITE(chr5,'(I5.5)') u attrname = 'attr '//chr5 CALL H5Aexists_f( gid, attrname, exists, error) - CALL VerifyLogical("H5Aexists",exists,.FALSE.,total_error ) + CALL verify("H5Aexists",exists,.FALSE.,total_error ) CALL H5Aexists_by_name_f(fid, GROUP1_NAME, attrname, exists, error, lapl_id = H5P_DEFAULT_F) - CALL VerifyLogical("H5Aexists_by_name_f",exists,.FALSE.,total_error ) + CALL verify("H5Aexists_by_name_f",exists,.FALSE.,total_error ) CALL h5acreate_f(gid, attrname, H5T_NATIVE_INTEGER, sid, aid, error, H5P_DEFAULT_F, H5P_DEFAULT_F) CALL check("h5acreate_f",error,total_error) CALL H5Aexists_f(gid, attrname, exists, error) - CALL VerifyLogical("H5Aexists",exists,.TRUE.,total_error ) + CALL verify("H5Aexists",exists,.TRUE.,total_error ) CALL H5Aexists_by_name_f(fid, GROUP1_NAME, attrname, exists, error) - CALL VerifyLogical("H5Aexists_by_name_f",exists,.TRUE.,total_error ) + CALL verify("H5Aexists_by_name_f",exists,.TRUE.,total_error ) attr_data1(1) = u data_dims(1) = 1 @@ -2680,10 +2646,10 @@ SUBROUTINE test_attr_many(new_format, fcpl, fapl, total_error) CALL check("h5aclose_f",error,total_error) CALL H5Aexists_f(gid, attrname, exists, error) - CALL VerifyLogical("H5Aexists",exists,.TRUE.,total_error ) + CALL verify("H5Aexists",exists,.TRUE.,total_error ) CALL H5Aexists_by_name_f(fid, GROUP1_NAME, attrname, exists, error) - CALL VerifyLogical("H5Aexists_by_name_f",exists,.TRUE.,total_error ) + CALL verify("H5Aexists_by_name_f",exists,.TRUE.,total_error ) ENDDO @@ -2717,9 +2683,6 @@ END SUBROUTINE test_attr_many SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fid CHARACTER(LEN=*), INTENT(IN) :: dsetname @@ -2757,13 +2720,13 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL check("h5aget_info_f",error,total_error) ! Check that the object's attributes are correct - CALL VERIFY("h5aget_info_f.corder",corder,u,total_error) - CALL Verifylogical("h5aget_info_f.corder_valid",f_corder_valid,.TRUE.,total_error) - CALL VERIFY("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) + CALL verify("h5aget_info_f.corder",corder,u,total_error) + CALL verify("h5aget_info_f.corder_valid",f_corder_valid,.TRUE.,total_error) + CALL verify("h5aget_info_f.cset", cset, H5T_CSET_ASCII_F, total_error) CALL h5aget_storage_size_f(attr_id, storage_size, error) CALL check("h5aget_storage_size_f",error,total_error) - CALL VERIFY("h5aget_info_f.data_size", INT(data_size), INT(storage_size), total_error) + CALL verify("h5aget_info_f.data_size", INT(data_size), INT(storage_size), total_error) ! Close attribute @@ -2778,12 +2741,12 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL h5aget_info_f(attr_id, f_corder_valid, corder, cset, data_size, error) CALL check("h5aget_info_f",error,total_error) ! Check the attribute's information - CALL VERIFY("h5aget_info_f",corder,u,total_error) - CALL Verifylogical("h5aget_info_f",f_corder_valid,.TRUE.,total_error) - CALL VERIFY("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) + CALL verify("h5aget_info_f",corder,u,total_error) + CALL verify("h5aget_info_f",f_corder_valid,.TRUE.,total_error) + CALL verify("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) CALL h5aget_storage_size_f(attr_id, storage_size, error) CALL check("h5aget_storage_size_f",error,total_error) - CALL VERIFY("h5aget_info_f", INT(data_size), INT(storage_size), total_error) + CALL verify("h5aget_info_f", INT(data_size), INT(storage_size), total_error) ! Close attribute CALL h5aclose_f(attr_id, error) @@ -2800,12 +2763,12 @@ SUBROUTINE attr_open_check(fid, dsetname, obj_id, max_attrs, total_error ) CALL check("h5aget_info_f",error,total_error) ! Check the attribute's information - CALL VERIFY("h5aget_info_f",corder,u,total_error) - CALL Verifylogical("h5aget_info_f",f_corder_valid,.TRUE.,total_error) - CALL VERIFY("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) + CALL verify("h5aget_info_f",corder,u,total_error) + CALL verify("h5aget_info_f",f_corder_valid,.TRUE.,total_error) + CALL verify("h5aget_info_f", cset, H5T_CSET_ASCII_F, total_error) CALL h5aget_storage_size_f(attr_id, storage_size, error) CALL check("h5aget_storage_size_f",error,total_error) - CALL VERIFY("h5aget_info_f", INT(data_size), INT(storage_size), total_error) + CALL verify("h5aget_info_f", INT(data_size), INT(storage_size), total_error) ! Close attribute CALL h5aclose_f(attr_id, error) diff --git a/fortran/test/tH5D.f90 b/fortran/test/tH5D.f90 index c0eb8f9..b5febb3 100644 --- a/fortran/test/tH5D.f90 +++ b/fortran/test/tH5D.f90 @@ -36,503 +36,477 @@ ! MODULE TH5D -CONTAINS - SUBROUTINE datasettest(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - - IMPLICIT NONE - LOGICAL, INTENT(IN) :: cleanup - INTEGER, INTENT(OUT) :: total_error - - CHARACTER(LEN=5), PARAMETER :: filename = "dsetf" ! File name - CHARACTER(LEN=80) :: fix_filename - CHARACTER(LEN=4), PARAMETER :: dsetname = "dset" ! Dataset name - CHARACTER(LEN=9), PARAMETER :: null_dsetname = "null_dset" ! Dataset name - - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HID_T) :: dset_id ! Dataset identifier - INTEGER(HID_T) :: null_dset ! Null dataset identifier - INTEGER(HID_T) :: dspace_id ! Dataspace identifier - INTEGER(HID_T) :: null_dspace ! Null dataspace identifier - INTEGER(HID_T) :: dtype_id ! Datatype identifier - - - INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions - INTEGER :: rank = 2 ! Dataset rank - - INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers - INTEGER :: error ! Error flag - - INTEGER :: i, j !general purpose integers - INTEGER(HSIZE_T), DIMENSION(2) :: data_dims - INTEGER(HSIZE_T), DIMENSION(1) :: null_data_dim - INTEGER :: null_dset_data = 1 ! null data - INTEGER :: flag ! Space allocation status - - ! - ! Initialize the dset_data array. - ! - do i = 1, 4 - do j = 1, 6 - dset_data(i,j) = (i-1)*6 + j; - end do - end do - - - ! - ! Create a new file using default properties. - ! - CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) - if (error .ne. 0) then - write(*,*) "Cannot modify filename" - stop - endif - CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) - CALL check("h5fcreate_f", error, total_error) - - - ! - ! Create the dataspace. - ! - CALL h5screate_simple_f(rank, dims, dspace_id, error) - CALL check("h5screate_simple_f", error, total_error) - ! - ! Create null dataspace. - ! - CALL h5screate_f(H5S_NULL_F, null_dspace, error) - CALL check("h5screate_simple_f", error, total_error) - - - ! - ! Create the dataset with default properties. - ! - CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dspace_id, & - dset_id, error) - CALL check("h5dcreate_f", error, total_error) - ! - ! Create the null dataset. - ! - CALL h5dcreate_f(file_id, null_dsetname, H5T_NATIVE_INTEGER, null_dspace, & - null_dset, error) - CALL check("h5dcreate_f", error, total_error) - - ! - ! Write the dataset. - ! - data_dims(1) = 4 - data_dims(2) = 6 - CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, dset_data, data_dims, error) - CALL check("h5dwrite_f", error, total_error) - ! - ! Write null dataset. Nothing can be written. - ! - null_data_dim(1) = 1 - CALL h5dwrite_f(null_dset, H5T_NATIVE_INTEGER, null_dset_data, null_data_dim, error) - CALL check("h5dwrite_f", error, total_error) - - - ! - ! End access to the dataset and release resources used by it. - ! - CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f", error, total_error) - CALL h5dclose_f(null_dset, error) - CALL check("h5dclose_f", error, total_error) - - ! - ! Terminate access to the data space. - ! - CALL h5sclose_f(dspace_id, error) - CALL check("h5sclose_f", error, total_error) - CALL h5sclose_f(null_dspace, error) - CALL check("h5sclose_f", error, total_error) - - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f", error, total_error) - - ! - ! Open the existing file. - ! - CALL h5fopen_f (fix_filename, H5F_ACC_RDWR_F, file_id, error) - CALL check("h5fopen_f", error, total_error) + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN - ! - ! Open the existing dataset. - ! - CALL h5dopen_f(file_id, dsetname, dset_id, error) - CALL check("h5dopen_f", error, total_error) - CALL h5dopen_f(file_id, null_dsetname, null_dset, error) - CALL check("h5dopen_f", error, total_error) - - ! Test whether space has been allocated for a dataset - CALL h5dget_space_status_f(dset_id, flag, error) - CALL check("h5dget_space_status_f",error, total_error) - CALL verify("h5dget_space_status_f", flag, H5D_SPACE_STS_ALLOCATED_F, total_error) - - CALL h5dget_space_status_f(null_dset, flag, error) - CALL check("h5dget_space_status_f",error, total_error) - CALL verify("h5dget_space_status_f", flag, H5D_SPACE_STS_NOT_ALLOCATED_F, total_error) - - - ! - ! Get the dataset type. - ! - CALL h5dget_type_f(dset_id, dtype_id, error) - CALL check("h5dget_type_f", error, total_error) - - ! - ! Get the data space. - ! - CALL h5dget_space_f(dset_id, dspace_id, error) - CALL check("h5dget_space_f", error, total_error) - - ! - ! Read the dataset. - ! - CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error) - CALL check("h5dread_f", error, total_error) - ! - ! Read the null dataset. Nothing should be read. - ! - CALL h5dread_f(null_dset, H5T_NATIVE_INTEGER, null_dset_data, null_data_dim, error) - CALL check("h5dread_f", error, total_error) - - ! - !Compare the data. - ! - do i = 1, 4 - do j = 1, 6 - IF (data_out(i,j) .NE. dset_data(i, j)) THEN - write(*, *) "dataset test error occured" - write(*,*) "data read is not the same as the data written" - END IF - end do - end do - - ! - ! Check if no change to null_dset_data - ! - IF (null_dset_data .NE. 1) THEN - write(*, *) "null dataset test error occured" +CONTAINS + SUBROUTINE datasettest(cleanup, total_error) + + IMPLICIT NONE + LOGICAL, INTENT(IN) :: cleanup + INTEGER, INTENT(OUT) :: total_error + + CHARACTER(LEN=5), PARAMETER :: filename = "dsetf" ! File name + CHARACTER(LEN=80) :: fix_filename + CHARACTER(LEN=4), PARAMETER :: dsetname = "dset" ! Dataset name + CHARACTER(LEN=9), PARAMETER :: null_dsetname = "null_dset" ! Dataset name + + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HID_T) :: dset_id ! Dataset identifier + INTEGER(HID_T) :: null_dset ! Null dataset identifier + INTEGER(HID_T) :: dspace_id ! Dataspace identifier + INTEGER(HID_T) :: null_dspace ! Null dataspace identifier + INTEGER(HID_T) :: dtype_id ! Datatype identifier + + INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions + INTEGER :: rank = 2 ! Dataset rank + + INTEGER, DIMENSION(4,6) :: dset_data, data_out ! Data buffers + INTEGER :: error ! Error flag + + INTEGER :: i, j !general purpose integers + INTEGER(HSIZE_T), DIMENSION(2) :: data_dims + INTEGER(HSIZE_T), DIMENSION(1) :: null_data_dim + INTEGER :: null_dset_data = 1 ! null data + INTEGER :: flag ! Space allocation status + + ! + ! Initialize the dset_data array. + ! + DO i = 1, 4 + DO j = 1, 6 + dset_data(i,j) = (i-1)*6 + j; + END DO + END DO + ! + ! Create a new file using default properties. + ! + CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) + IF (error .NE. 0) THEN + WRITE(*,*) "Cannot modify filename" + STOP + ENDIF + CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) + CALL check("h5fcreate_f", error, total_error) + ! + ! Create the dataspace. + ! + CALL h5screate_simple_f(rank, dims, dspace_id, error) + CALL check("h5screate_simple_f", error, total_error) + ! + ! Create null dataspace. + ! + CALL h5screate_f(H5S_NULL_F, null_dspace, error) + CALL check("h5screate_simple_f", error, total_error) + ! + ! Create the dataset with default properties. + ! + CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dspace_id, & + dset_id, error) + CALL check("h5dcreate_f", error, total_error) + ! + ! Create the null dataset. + ! + CALL h5dcreate_f(file_id, null_dsetname, H5T_NATIVE_INTEGER, null_dspace, null_dset, error) + CALL check("h5dcreate_f", error, total_error) + ! + ! Write the dataset. + ! + data_dims(1) = 4 + data_dims(2) = 6 + CALL h5dwrite_f(dset_id, H5T_NATIVE_INTEGER, dset_data, data_dims, error) + CALL check("h5dwrite_f", error, total_error) + ! + ! Write null dataset. Nothing can be written. + ! + null_data_dim(1) = 1 + CALL h5dwrite_f(null_dset, H5T_NATIVE_INTEGER, null_dset_data, null_data_dim, error) + CALL check("h5dwrite_f", error, total_error) + ! + ! End access to the dataset and release resources used by it. + ! + CALL h5dclose_f(dset_id, error) + CALL check("h5dclose_f", error, total_error) + CALL h5dclose_f(null_dset, error) + CALL check("h5dclose_f", error, total_error) + ! + ! Terminate access to the data space. + ! + CALL h5sclose_f(dspace_id, error) + CALL check("h5sclose_f", error, total_error) + CALL h5sclose_f(null_dspace, error) + CALL check("h5sclose_f", error, total_error) + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f", error, total_error) + ! + ! Open the existing file. + ! + CALL h5fopen_f (fix_filename, H5F_ACC_RDWR_F, file_id, error) + CALL check("h5fopen_f", error, total_error) + ! + ! Open the existing dataset. + ! + CALL h5dopen_f(file_id, dsetname, dset_id, error) + CALL check("h5dopen_f", error, total_error) + CALL h5dopen_f(file_id, null_dsetname, null_dset, error) + CALL check("h5dopen_f", error, total_error) + + ! Test whether space has been allocated for a dataset + CALL h5dget_space_status_f(dset_id, flag, error) + CALL check("h5dget_space_status_f",error, total_error) + CALL VERIFY("h5dget_space_status_f", flag, H5D_SPACE_STS_ALLOCATED_F, total_error) + + CALL h5dget_space_status_f(null_dset, flag, error) + CALL check("h5dget_space_status_f",error, total_error) + CALL VERIFY("h5dget_space_status_f", flag, H5D_SPACE_STS_NOT_ALLOCATED_F, total_error) + ! + ! Get the dataset type. + ! + CALL h5dget_type_f(dset_id, dtype_id, error) + CALL check("h5dget_type_f", error, total_error) + ! + ! Get the data space. + ! + CALL h5dget_space_f(dset_id, dspace_id, error) + CALL check("h5dget_space_f", error, total_error) + ! + ! Read the dataset. + ! + CALL h5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error) + CALL check("h5dread_f", error, total_error) + ! + ! Read the null dataset. Nothing should be read. + ! + CALL h5dread_f(null_dset, H5T_NATIVE_INTEGER, null_dset_data, null_data_dim, error) + CALL check("h5dread_f", error, total_error) + ! + !Compare the data. + ! + DO i = 1, 4 + DO j = 1, 6 + IF (data_out(i,j) .NE. dset_data(i, j)) THEN + WRITE(*, *) "dataset test error occured" + WRITE(*,*) "data read is not the same as the data written" END IF - - ! - ! End access to the dataset and release resources used by it. - ! - CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f", error, total_error) - CALL h5dclose_f(null_dset, error) - CALL check("h5dclose_f", error, total_error) - - ! - ! Terminate access to the data space. - ! - CALL h5sclose_f(dspace_id, error) - CALL check("h5sclose_f", error, total_error) - - ! - ! Terminate access to the data type. - ! - CALL h5tclose_f(dtype_id, error) - CALL check("h5tclose_f", error, total_error) - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f", error, total_error) - if(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) - CALL check("h5_cleanup_f", error, total_error) - - RETURN - END SUBROUTINE datasettest - + END DO + END DO + ! + ! Check if no change to null_dset_data + ! + IF (null_dset_data .NE. 1) THEN + WRITE(*, *) "null dataset test error occured" + END IF + ! + ! End access to the dataset and release resources used by it. + ! + CALL h5dclose_f(dset_id, error) + CALL check("h5dclose_f", error, total_error) + CALL h5dclose_f(null_dset, error) + CALL check("h5dclose_f", error, total_error) + ! + ! Terminate access to the data space. + ! + CALL h5sclose_f(dspace_id, error) + CALL check("h5sclose_f", error, total_error) + + ! + ! Terminate access to the data type. + ! + CALL h5tclose_f(dtype_id, error) + CALL check("h5tclose_f", error, total_error) + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f", error, total_error) + IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) + CALL check("h5_cleanup_f", error, total_error) + + RETURN + END SUBROUTINE datasettest + ! !the following subroutine tests h5dextend_f functionality ! - SUBROUTINE extenddsettest(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - - IMPLICIT NONE - - LOGICAL, INTENT(IN) :: cleanup - INTEGER, INTENT(OUT) :: total_error - - ! - !the dataset is stored in file "extf.h5" - ! - CHARACTER(LEN=4), PARAMETER :: filename = "extf" - CHARACTER(LEN=80) :: fix_filename - - ! - !dataset name is "ExtendibleArray" - ! - CHARACTER(LEN=15), PARAMETER :: dsetname = "ExtendibleArray" - - ! - !dataset rank is 2 - ! - INTEGER :: RANK = 2 - - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HID_T) :: dset_id ! Dataset identifier - INTEGER(HID_T) :: dataspace ! Dataspace identifier - INTEGER(HID_T) :: memspace ! memory Dataspace identifier - INTEGER(HID_T) :: crp_list ! dataset creatation property identifier - - ! - !dataset dimensions at creation time - ! - INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/3,3/) - - ! - !data dimensions - ! - INTEGER(HSIZE_T), DIMENSION(2) :: dims1 = (/10,3/) - - ! - !Maximum dimensions - ! - INTEGER(HSIZE_T), DIMENSION(2) :: maxdims - - ! - !data arrays for reading and writing - ! - INTEGER, DIMENSION(10,3) :: data_in, data_out - - ! - !Size of data in the file - ! - INTEGER(HSIZE_T), DIMENSION(2) :: size - - ! - !general purpose integer - ! - INTEGER :: i, j - INTEGER(HSIZE_T) :: ih, jh - - ! - !flag to check operation success - ! - INTEGER :: error - - ! - !Variables used in reading data back - ! - INTEGER(HSIZE_T), DIMENSION(2) :: dimsr, maxdimsr - INTEGER :: rankr - INTEGER(HSIZE_T), DIMENSION(2) :: data_dims - - ! - !data initialization - ! - do i = 1, 10 - do j = 1, 3 - data_in(i,j) = 2 - end do - end do - - ! - !Initialize FORTRAN predifined datatypes - ! + SUBROUTINE extenddsettest(cleanup, total_error) + + IMPLICIT NONE + + LOGICAL, INTENT(IN) :: cleanup + INTEGER, INTENT(OUT) :: total_error + + ! + !the dataset is stored in file "extf.h5" + ! + CHARACTER(LEN=4), PARAMETER :: filename = "extf" + CHARACTER(LEN=80) :: fix_filename + + ! + !dataset name is "ExtendibleArray" + ! + CHARACTER(LEN=15), PARAMETER :: dsetname = "ExtendibleArray" + + ! + !dataset rank is 2 + ! + INTEGER :: RANK = 2 + + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HID_T) :: dset_id ! Dataset identifier + INTEGER(HID_T) :: dataspace ! Dataspace identifier + INTEGER(HID_T) :: memspace ! memory Dataspace identifier + INTEGER(HID_T) :: crp_list ! dataset creatation property identifier + + ! + !dataset dimensions at creation time + ! + INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/3,3/) + + ! + !data dimensions + ! + INTEGER(HSIZE_T), DIMENSION(2) :: dims1 = (/10,3/) + + ! + !Maximum dimensions + ! + INTEGER(HSIZE_T), DIMENSION(2) :: maxdims + + ! + !data arrays for reading and writing + ! + INTEGER, DIMENSION(10,3) :: data_in, data_out + + ! + !Size of data in the file + ! + INTEGER(HSIZE_T), DIMENSION(2) :: size + + ! + !general purpose integer + ! + INTEGER :: i, j + INTEGER(HSIZE_T) :: ih, jh + + ! + !flag to check operation success + ! + INTEGER :: error + + ! + !Variables used in reading data back + ! + INTEGER(HSIZE_T), DIMENSION(2) :: dimsr, maxdimsr + INTEGER :: rankr + INTEGER(HSIZE_T), DIMENSION(2) :: data_dims + + ! + !data initialization + ! + DO i = 1, 10 + DO j = 1, 3 + data_in(i,j) = 2 + END DO + END DO + + ! + !Initialize FORTRAN predifined datatypes + ! ! CALL h5init_types_f(error) ! CALL check("h5init_types_f",error,total_error) - ! - !Create a new file using default properties. - ! - CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) - if (error .ne. 0) then - write(*,*) "Cannot modify filename" - stop - endif - CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) - CALL check("h5fcreate_f",error,total_error) - - - ! - !Create the data space with unlimited dimensions. - ! - maxdims = (/H5S_UNLIMITED_F, H5S_UNLIMITED_F/) - - CALL h5screate_simple_f(RANK, dims, dataspace, error, maxdims) - CALL check("h5screate_simple_f",error,total_error) - - ! - !Modify dataset creation properties, i.e. enable chunking - ! - CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error) - CALL check("h5pcreat_f",error,total_error) - - CALL h5pset_chunk_f(crp_list, RANK, dims1, error) - CALL check("h5pset_chunk_f",error,total_error) - - ! - !Create a dataset with 3X3 dimensions using cparms creation propertie . - ! - CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dataspace, & - dset_id, error, crp_list ) - CALL check("h5dcreate_f",error,total_error) - - ! - !Extend the dataset. This call assures that dataset is 3 x 3. - ! - size(1) = 3 - size(2) = 3 - CALL h5dextend_f(dset_id, size, error) - CALL check("h5dextend_f",error,total_error) - - - ! - !Extend the dataset. Dataset becomes 10 x 3. - ! - size(1) = 10; - size(2) = 3; - CALL h5dextend_f(dset_id, size, error) - CALL check("h5dextend_f",error,total_error) - - ! - !Write the data of size 10X3 to the extended dataset. - ! - data_dims(1) = 10 - data_dims(2) = 3 - CALL H5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data_in, data_dims, error) - CALL check("h5dwrite_f",error,total_error) - - ! - !Close the dataspace for the dataset. - ! - CALL h5sclose_f(dataspace, error) - CALL check("h5sclose_f",error,total_error) - - ! - !Close the property list. - ! - CALL h5pclose_f(crp_list, error) - CALL check("h5pclose_f",error,total_error) - ! - !Close the dataset. - ! - CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f",error,total_error) - - ! - !Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f",error,total_error) - - ! - !read the data back - ! - !Open the file. - ! - CALL h5fopen_f (fix_filename, H5F_ACC_RDONLY_F, file_id, error) - CALL check("hfopen_f",error,total_error) - - ! - !Open the dataset. - ! - CALL h5dopen_f(file_id, dsetname, dset_id, error) - CALL check("h5dopen_f",error,total_error) - - ! - !Get dataset's dataspace handle. - ! - CALL h5dget_space_f(dset_id, dataspace, error) - CALL check("h5dget_space_f",error,total_error) - - ! - !Get dataspace's rank. - ! - CALL h5sget_simple_extent_ndims_f(dataspace, rankr, error) - CALL check("h5sget_simple_extent_ndims_f",error,total_error) - IF (rankr .NE. RANK) then - write(*,*) "dataset rank error occured" - stop - END IF - - ! - !Get dataspace's dimensinons. - ! - CALL h5sget_simple_extent_dims_f(dataspace, dimsr, maxdimsr, error) - CALL check("h5sget_simple_extent_dims_f",error,total_error) - IF ((dimsr(1) .NE. dims1(1)) .OR. (dimsr(2) .NE. dims1(2))) THEN - write(*,*) "dataset dimensions error occured" - stop + ! + !Create a new file using default properties. + ! + CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) + IF (error .NE. 0) THEN + WRITE(*,*) "Cannot modify filename" + STOP + ENDIF + CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) + CALL check("h5fcreate_f",error,total_error) + + ! + !Create the data space with unlimited dimensions. + ! + maxdims = (/H5S_UNLIMITED_F, H5S_UNLIMITED_F/) + + CALL h5screate_simple_f(RANK, dims, dataspace, error, maxdims) + CALL check("h5screate_simple_f",error,total_error) + + ! + !Modify dataset creation properties, i.e. enable chunking + ! + CALL h5pcreate_f(H5P_DATASET_CREATE_F, crp_list, error) + CALL check("h5pcreat_f",error,total_error) + + CALL h5pset_chunk_f(crp_list, RANK, dims1, error) + CALL check("h5pset_chunk_f",error,total_error) + + ! + !Create a dataset with 3X3 dimensions using cparms creation propertie . + ! + CALL h5dcreate_f(file_id, dsetname, H5T_NATIVE_INTEGER, dataspace, dset_id, error, crp_list ) + CALL check("h5dcreate_f",error,total_error) + + ! + !Extend the dataset. This call assures that dataset is 3 x 3. + ! + SIZE(1) = 3 + SIZE(2) = 3 + CALL h5dextend_f(dset_id, size, error) + CALL check("h5dextend_f",error,total_error) + + + ! + !Extend the dataset. Dataset becomes 10 x 3. + ! + SIZE(1) = 10; + SIZE(2) = 3; + CALL h5dextend_f(dset_id, size, error) + CALL check("h5dextend_f",error,total_error) + + ! + !Write the data of size 10X3 to the extended dataset. + ! + data_dims(1) = 10 + data_dims(2) = 3 + CALL H5dwrite_f(dset_id, H5T_NATIVE_INTEGER, data_in, data_dims, error) + CALL check("h5dwrite_f",error,total_error) + + ! + !Close the dataspace for the dataset. + ! + CALL h5sclose_f(dataspace, error) + CALL check("h5sclose_f",error,total_error) + + ! + !Close the property list. + ! + CALL h5pclose_f(crp_list, error) + CALL check("h5pclose_f",error,total_error) + ! + !Close the dataset. + ! + CALL h5dclose_f(dset_id, error) + CALL check("h5dclose_f",error,total_error) + + ! + !Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f",error,total_error) + + ! + !read the data back + ! + !Open the file. + ! + CALL h5fopen_f (fix_filename, H5F_ACC_RDONLY_F, file_id, error) + CALL check("hfopen_f",error,total_error) + + ! + !Open the dataset. + ! + CALL h5dopen_f(file_id, dsetname, dset_id, error) + CALL check("h5dopen_f",error,total_error) + + ! + !Get dataset's dataspace handle. + ! + CALL h5dget_space_f(dset_id, dataspace, error) + CALL check("h5dget_space_f",error,total_error) + + ! + !Get dataspace's rank. + ! + CALL h5sget_simple_extent_ndims_f(dataspace, rankr, error) + CALL check("h5sget_simple_extent_ndims_f",error,total_error) + IF (rankr .NE. RANK) THEN + WRITE(*,*) "dataset rank error occured" + STOP + END IF + + ! + !Get dataspace's dimensinons. + ! + CALL h5sget_simple_extent_dims_f(dataspace, dimsr, maxdimsr, error) + CALL check("h5sget_simple_extent_dims_f",error,total_error) + IF ((dimsr(1) .NE. dims1(1)) .OR. (dimsr(2) .NE. dims1(2))) THEN + WRITE(*,*) "dataset dimensions error occured" + STOP + END IF + + ! + !Get creation property list. + ! + CALL h5dget_create_plist_f(dset_id, crp_list, error) + CALL check("h5dget_create_plist_f",error,total_error) + + + ! + !create memory dataspace. + ! + CALL h5screate_simple_f(rankr, dimsr, memspace, error) + CALL check("h5screate_simple_f",error,total_error) + + ! + !Read data + ! + CALL H5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error, memspace, dataspace) + CALL check("h5dread_f",error,total_error) + + + ! + !Compare the data. + ! + DO ih = 1, dims1(1) + DO jh = 1, dims1(2) + IF (data_out(ih,jh) .NE. data_in(ih, jh)) THEN + WRITE(*, *) "extend dataset test error occured" + WRITE(*, *) "read value is not the same as the written values" END IF - - ! - !Get creation property list. - ! - CALL h5dget_create_plist_f(dset_id, crp_list, error) - CALL check("h5dget_create_plist_f",error,total_error) - - - ! - !create memory dataspace. - ! - CALL h5screate_simple_f(rankr, dimsr, memspace, error) - CALL check("h5screate_simple_f",error,total_error) - - ! - !Read data - ! - CALL H5dread_f(dset_id, H5T_NATIVE_INTEGER, data_out, data_dims, error, & - memspace, dataspace) - CALL check("h5dread_f",error,total_error) - - - ! - !Compare the data. - ! - do ih = 1, dims1(1) - do jh = 1, dims1(2) - IF (data_out(ih,jh) .NE. data_in(ih, jh)) THEN - write(*, *) "extend dataset test error occured" - write(*, *) "read value is not the same as the written values" - END IF - end do - end do - - ! - !Close the dataspace for the dataset. - ! - CALL h5sclose_f(dataspace, error) - CALL check("h5sclose_f",error,total_error) - - ! - !Close the memspace for the dataset. - ! - CALL h5sclose_f(memspace, error) - CALL check("h5sclose_f",error,total_error) - - ! - !Close the property list. - ! - CALL h5pclose_f(crp_list, error) - CALL check("h5pclose_f",error,total_error) - - ! - !Close the dataset. - ! - CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f",error,total_error) - - ! - !Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f",error,total_error) - if(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) - CALL check("h5_cleanup_f", error, total_error) - - RETURN - END SUBROUTINE extenddsettest + END DO + END DO + + ! + !Close the dataspace for the dataset. + ! + CALL h5sclose_f(dataspace, error) + CALL check("h5sclose_f",error,total_error) + + ! + !Close the memspace for the dataset. + ! + CALL h5sclose_f(memspace, error) + CALL check("h5sclose_f",error,total_error) + + ! + !Close the property list. + ! + CALL h5pclose_f(crp_list, error) + CALL check("h5pclose_f",error,total_error) + + ! + !Close the dataset. + ! + CALL h5dclose_f(dset_id, error) + CALL check("h5dclose_f",error,total_error) + + ! + !Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f",error,total_error) + IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) + CALL check("h5_cleanup_f", error, total_error) + + RETURN + END SUBROUTINE extenddsettest END MODULE TH5D diff --git a/fortran/test/tH5E_F03.f90 b/fortran/test/tH5E_F03.f90 index a7d45f2..63e70a3 100644 --- a/fortran/test/tH5E_F03.f90 +++ b/fortran/test/tH5E_F03.f90 @@ -36,6 +36,9 @@ ! ***************************************** MODULE test_my_hdf5_error_handler + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN CONTAINS @@ -49,8 +52,6 @@ CONTAINS ! This error function handle works with only version 2 error stack - USE HDF5 - USE ISO_C_BINDING IMPLICIT NONE ! estack_id is always passed from C as: H5E_DEFAULT @@ -74,8 +75,6 @@ CONTAINS ! This error function handle works with only version 2 error stack - USE HDF5 - USE ISO_C_BINDING IMPLICIT NONE ! estack_id is always passed from C as: H5E_DEFAULT @@ -102,8 +101,6 @@ CONTAINS SUBROUTINE test_error(total_error) - USE HDF5 - USE TH5_MISC USE ISO_C_BINDING USE test_my_hdf5_error_handler @@ -147,15 +144,15 @@ SUBROUTINE test_error(total_error) ! Create the erring dataset CALL h5dcreate_f(FAKE_ID,"a_dataset",H5T_NATIVE_INTEGER, space, dataset, error) - CALL VERIFY("h5dcreate_f", error, -1, total_error) + CALL verify("h5dcreate_f", error, -1, total_error) -!!$ CALL VERIFY("H5Eset_auto_f",my_hdf5_error_handler_data(1),10, total_error) -!!$ CALL VERIFY("H5Eset_auto_f",my_hdf5_error_handler_data(2),20, total_error) +!!$ CALL verify("H5Eset_auto_f",my_hdf5_error_handler_data(1),10, total_error) +!!$ CALL verify("H5Eset_auto_f",my_hdf5_error_handler_data(2),20, total_error) !!$ ! Test enabling and disabling default printing !!$ !!$ CALL H5Eget_auto_f(H5E_DEFAULT_F, func1, f_ptr1, error) -!!$ CALL VERIFY("H5Eget_auto_f", error, 0, total_error) +!!$ CALL verify("H5Eget_auto_f", error, 0, total_error) ! PRINT*,c_associated(f_ptr1) @@ -187,7 +184,7 @@ SUBROUTINE test_error(total_error) CALL H5Eset_auto_f(1, error, H5E_DEFAULT_F, func, f_ptr) CALL h5dcreate_f(FAKE_ID,"a_dataset",H5T_NATIVE_INTEGER, space, dataset, error) - CALL VERIFY("h5dcreate_f", error, -1, total_error) + CALL verify("h5dcreate_f", error, -1, total_error) ! turn on automatic printing with h5eprint_f which prints an error stack in the default manner. diff --git a/fortran/test/tH5F_F03.f90 b/fortran/test/tH5F_F03.f90 index c878a59..9e23d19 100644 --- a/fortran/test/tH5F_F03.f90 +++ b/fortran/test/tH5F_F03.f90 @@ -38,16 +38,17 @@ MODULE TH5F_F03 + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + USE ISO_C_BINDING + CONTAINS SUBROUTINE test_get_file_image(total_error) ! ! Tests the wrapper for h5fget_file_image ! - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error ! returns error @@ -128,8 +129,8 @@ SUBROUTINE test_get_file_image(total_error) itmp_a = 1 CALL h5fget_file_image_f(file_id, f_ptr, itmp_a, error, image_size) CALL check("h5fget_file_image_f",error, total_error) - CALL VERIFY("h5fget_file_image_f", INT(itmp_a), 1, total_error) ! Routine should not change the value - CALL VERIFY("h5fget_file_image_f", file_sz, INT(image_size), total_error) + CALL verify("h5fget_file_image_f", INT(itmp_a), 1, total_error) ! Routine should not change the value + CALL verify("h5fget_file_image_f", file_sz, INT(image_size), total_error) ! Allocate a buffer of the appropriate size ALLOCATE(image_ptr(1:image_size)) diff --git a/fortran/test/tH5G_1_8.f90 b/fortran/test/tH5G_1_8.f90 index ab75163..ddc3736 100644 --- a/fortran/test/tH5G_1_8.f90 +++ b/fortran/test/tH5G_1_8.f90 @@ -31,11 +31,13 @@ MODULE TH5G_1_8 + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE group_test(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -139,9 +141,6 @@ END SUBROUTINE group_test SUBROUTINE group_info(cleanup, fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -269,7 +268,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! Check for out of bound query by index on empty group, should fail CALL H5Gget_info_by_idx_f(group_id, ".", H5_INDEX_NAME_F, order, INT(0,HSIZE_T), & storage_type, nlinks, max_corder, error) - CALL VERIFY("H5Gget_info_by_idx_f", error, -1, total_error) + CALL verify("H5Gget_info_by_idx_f", error, -1, total_error) ! Create several links, up to limit of compact form DO u = 0, max_compact-1 @@ -287,29 +286,29 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Gget_info_f", error, total_error) ! Check (new/empty) group's information - CALL VERIFY("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_f", max_corder, 0, total_error) - CALL VERIFY("H5Gget_info_f", nlinks, 0, total_error) - CALL verifyLogical("H5Gget_info_f.mounted", mounted,.FALSE.,total_error) + CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_f", max_corder, 0, total_error) + CALL verify("H5Gget_info_f", nlinks, 0, total_error) + CALL verify("H5Gget_info_f.mounted", mounted,.FALSE.,total_error) ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id, objname, storage_type, nlinks, max_corder, error, mounted=mounted) CALL check("H5Gget_info_by_name_f", error, total_error) ! Check (new/empty) group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f", max_corder, 0, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, 0, total_error) - CALL verifyLogical("H5Gget_info_by_name_f.mounted", mounted,.FALSE.,total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f", max_corder, 0, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, 0, total_error) + CALL verify("H5Gget_info_by_name_f.mounted", mounted,.FALSE.,total_error) ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id2, ".", storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name", error, total_error) ! Check (new/empty) group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f", max_corder, 0, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, 0, total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f", max_corder, 0, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, 0, total_error) ! Create objects in new group created DO v = 0, u @@ -331,27 +330,27 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Gget_info_f", error, total_error) ! Check (new) group's information - CALL VERIFY("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_f", nlinks, u+1, total_error) ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id, objname, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) ! Check (new) group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f",max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f",max_corder, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) ! Retrieve group's information CALL H5Gget_info_by_name_f(group_id2, ".", storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) ! Check (new) group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) ! Retrieve group's information IF(order.NE.H5_ITER_NATIVE_F)THEN @@ -359,17 +358,17 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL H5Gget_info_by_idx_f(group_id, ".", idx_type, order, INT(u,HSIZE_T), & storage_type, nlinks, max_corder, error,lapl_id=H5P_DEFAULT_F, mounted=mounted) CALL check("H5Gget_info_by_idx_f", error, total_error) - CALL verifyLogical("H5Gget_info_by_idx_f", mounted,.FALSE.,total_error) + CALL verify("H5Gget_info_by_idx_f", mounted,.FALSE.,total_error) ELSE CALL H5Gget_info_by_idx_f(group_id, ".", idx_type, order, INT(0,HSIZE_T), & storage_type, nlinks, max_corder, error, mounted=mounted) - CALL verifyLogical("H5Gget_info_by_idx_f", mounted,.FALSE.,total_error) + CALL verify("H5Gget_info_by_idx_f", mounted,.FALSE.,total_error) CALL check("H5Gget_info_by_idx_f", error, total_error) ENDIF ! Check (new) group's information - CALL VERIFY("H5Gget_info_by_idx_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_idx_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_by_idx_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_by_idx_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_idx_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_by_idx_f", nlinks, u+1, total_error) ENDIF ! Close group created CALL H5Gclose_f(group_id2, error) @@ -380,27 +379,27 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Gget_info_f", error, total_error) ! Check main group's information - CALL VERIFY("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_f", nlinks, u+1, total_error) ! Retrieve main group's information, by name CALL H5Gget_info_by_name_f(file_id, CORDER_GROUP_NAME, storage_type, nlinks, max_corder, error) CALL check("H5Gget_info_by_name_f", error, total_error) ! Check main group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) ! Retrieve main group's information, by name CALL H5Gget_info_by_name_f(group_id, ".", storage_type, nlinks, max_corder, error, H5P_DEFAULT_F) CALL check("H5Gget_info_by_name_f", error, total_error) ! Check main group's information - CALL VERIFY("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_by_name_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_by_name_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_by_name_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_by_name_f", nlinks, u+1, total_error) ! Create soft link in another group, to objects in main group valname = CORDER_GROUP_NAME//objname @@ -412,9 +411,9 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Gget_info_f", error, total_error) ! Check soft link group's information - CALL VERIFY("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) - CALL VERIFY("H5Gget_info_f", max_corder, u+1, total_error) - CALL VERIFY("H5Gget_info_f", nlinks, u+1, total_error) + CALL verify("H5Gget_info_f", storage_type, H5G_STORAGE_TYPE_COMPACT_F, total_error) + CALL verify("H5Gget_info_f", max_corder, u+1, total_error) + CALL verify("H5Gget_info_f", nlinks, u+1, total_error) ENDDO ! Close the groups @@ -456,9 +455,6 @@ SUBROUTINE group_info(cleanup, fapl, total_error) SUBROUTINE timestamps(cleanup, fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -491,7 +487,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Pget_obj_track_times_f", error, total_error) ! Check default timestamp information - CALL VerifyLogical("H5Pget_obj_track_times",track_times,.TRUE.,total_error) + CALL verify("H5Pget_obj_track_times",track_times,.TRUE.,total_error) ! Set a non-default object timestamp setting CALL H5Pset_obj_track_times_f(gcpl_id, .FALSE., error) @@ -502,7 +498,7 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL check("H5Pget_obj_track_times_f", error, total_error) ! Check default timestamp information - CALL VerifyLogical("H5Pget_obj_track_times",track_times,.FALSE.,total_error) + CALL verify("H5Pget_obj_track_times",track_times,.FALSE.,total_error) ! Create file !h5_fixname(FILENAME[0], fapl, filename, sizeof filename); @@ -533,10 +529,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! Query & verify the object timestamp settings CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - CALL VerifyLogical("H5Pget_obj_track_times1",track_times,.FALSE.,total_error) + CALL verify("H5Pget_obj_track_times1",track_times,.FALSE.,total_error) CALL H5Pget_obj_track_times_f(gcpl_id2, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - CALL VerifyLogical("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) + CALL verify("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) ! Query the object information for each group ! if(H5Oget_info(group_id, &oinfo) < 0) TEST_ERROR @@ -593,10 +589,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL H5Pget_obj_track_times_f(gcpl_id, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - CALL VerifyLogical("H5Pget_obj_track_times1",track_times,.FALSE.,total_error) + CALL verify("H5Pget_obj_track_times1",track_times,.FALSE.,total_error) CALL H5Pget_obj_track_times_f(gcpl_id2, track_times, error) CALL check("H5Pget_obj_track_times_f", error, total_error) - CALL VerifyLogical("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) + CALL verify("H5Pget_obj_track_times2",track_times,.TRUE.,total_error) !!$ !!$ Query the object information for each group !!$ if(H5Oget_info(group_id, &oinfo) < 0) TEST_ERROR @@ -653,9 +649,6 @@ SUBROUTINE group_info(cleanup, fapl, total_error) SUBROUTINE mklinks(fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -711,12 +704,12 @@ SUBROUTINE group_info(cleanup, fapl, total_error) error, H5P_DEFAULT_F) CALL check("H5Lget_info_f",error,total_error) -! CALL VerifyLogical("H5Lget_info_by_idx_f11", f_corder_valid, .TRUE., total_error) +! CALL verify("H5Lget_info_by_idx_f11", f_corder_valid, .TRUE., total_error) - CALL VERIFY("H5Lget_info_by_idx_f", H5L_TYPE_SOFT_F, link_type, total_error) - CALL VERIFY("H5Lget_info_by_idx_f", cset, H5T_CSET_ASCII_F, total_error) + CALL verify("H5Lget_info_by_idx_f", H5L_TYPE_SOFT_F, link_type, total_error) + CALL verify("H5Lget_info_by_idx_f", cset, H5T_CSET_ASCII_F, total_error) ! should be '/d1' + NULL character = 4 - CALL VERIFY("H5Lget_info_by_idx_f", INT(val_size), 4, total_error) + CALL verify("H5Lget_info_by_idx_f", INT(val_size), 4, total_error) ! Create a symbolic link to something that doesn't exist @@ -749,9 +742,6 @@ SUBROUTINE group_info(cleanup, fapl, total_error) SUBROUTINE test_move_preserves(fapl_id, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl_id @@ -798,14 +788,14 @@ SUBROUTINE group_info(cleanup, fapl, total_error) CALL H5Pget_link_creation_order_f(fcpl_id, crt_order_flags, error) CALL check("H5Pget_link_creation_order_f",error, total_error) - CALL VERIFY("H5Pget_link_creation_order_f",crt_order_flags,0, total_error) + CALL verify("H5Pget_link_creation_order_f",crt_order_flags,0, total_error) CALL H5Pset_link_creation_order_f(fcpl_id, H5P_CRT_ORDER_TRACKED_F, error) CALL check("H5Pset_link_creation_order_f", error, total_error) CALL H5Pget_link_creation_order_f(fcpl_id, crt_order_flags, error) CALL check("H5Pget_link_creation_order_f",error, total_error) - CALL VERIFY("H5Pget_link_creation_order_f",crt_order_flags, H5P_CRT_ORDER_TRACKED_F, total_error) + CALL verify("H5Pget_link_creation_order_f",crt_order_flags, H5P_CRT_ORDER_TRACKED_F, total_error) ! Create file ! (with creation order tracking for the root group) @@ -835,10 +825,10 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! if(H5Oget_info_by_name(file_id, "group", &oinfo, H5P_DEFAULT) < 0) TEST_ERROR old_cset = cset - CALL VERIFY("H5Lget_info_f",old_cset,H5T_CSET_UTF8_F,total_error) - CALL VerifyLogical("H5Lget_info_f",f_corder_valid,.TRUE.,total_error) + CALL verify("H5Lget_info_f",old_cset,H5T_CSET_UTF8_F,total_error) + CALL verify("H5Lget_info_f",f_corder_valid,.TRUE.,total_error) old_corder = corder; - CALL VERIFY("H5Lget_info_f",old_corder,0,total_error) + CALL verify("H5Lget_info_f",old_corder,0,total_error) ! old_modification_time = oinfo.mtime; @@ -956,10 +946,6 @@ SUBROUTINE group_info(cleanup, fapl, total_error) ! SUBROUTINE lifecycle(cleanup, fapl2, total_error) - - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl2 @@ -1105,10 +1091,6 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) SUBROUTINE cklinks(fapl, total_error) -! USE ISO_C_BINDING - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -1146,10 +1128,10 @@ SUBROUTINE lifecycle(cleanup, fapl2, total_error) CALL H5Lexists_f(file,"d1",Lexists, error) - CALL verifylogical("H5Lexists", Lexists,.TRUE.,total_error) + CALL verify("H5Lexists", Lexists,.TRUE.,total_error) CALL H5Lexists_f(file,"grp1/hard",Lexists, error) - CALL verifylogical("H5Lexists", Lexists,.TRUE.,total_error) + CALL verify("H5Lexists", Lexists,.TRUE.,total_error) ! Cleanup CALL H5Fclose_f(file,error) @@ -1176,9 +1158,6 @@ END SUBROUTINE cklinks ! SUBROUTINE delete_by_idx(cleanup, fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -1294,7 +1273,7 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) ! Check for deletion on empty group CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, INT(0,HSIZE_T), error) - CALL VERIFY("delete_by_idx.H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) + CALL verify("delete_by_idx.H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) ! Create several links, up to limit of compact form DO u = 0, max_compact-1 ! Make name for link @@ -1319,7 +1298,7 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) htmp =9 !EP CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, INT(u,HSIZE_T), error) CALL H5Ldelete_by_idx_f(group_id, ".", idx_type, iorder, htmp, error) - CALL VERIFY("H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) + CALL verify("H5Ldelete_by_idx_f", error, -1, total_error) ! test should fail (error = -1) ! Delete links from compact group @@ -1340,21 +1319,21 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) CALL H5Iget_type_f(grp, id_type, error) CALL check("H5Iget_type_f", error, total_error) - CALL VERIFY("H5Iget_type_f", id_type, H5I_GROUP_F, total_error) + CALL verify("H5Iget_type_f", id_type, H5I_GROUP_F, total_error) CALL H5Gclose_f(grp, error) CALL check("H5Gclose_f", error, total_error) - CALL VerifyLogical("H5Lget_info_by_idx_f", f_corder_valid, .TRUE., total_error) + CALL verify("H5Lget_info_by_idx_f", f_corder_valid, .TRUE., total_error) - CALL VERIFY("H5Lget_info_by_idx_f", H5L_TYPE_HARD_F, link_type, total_error) + CALL verify("H5Lget_info_by_idx_f", H5L_TYPE_HARD_F, link_type, total_error) IF(iorder.EQ.H5_ITER_INC_F)THEN - CALL VERIFY("H5Lget_info_by_idx_f", corder, u+1, total_error) + CALL verify("H5Lget_info_by_idx_f", corder, u+1, total_error) ELSE - CALL VERIFY("H5Lget_info_by_idx_f", corder, (max_compact - (u + 2)), total_error) + CALL verify("H5Lget_info_by_idx_f", corder, (max_compact - (u + 2)), total_error) ENDIF - CALL VERIFY("H5Lget_info_by_idx_f",cset, H5T_CSET_ASCII_F, total_error) + CALL verify("H5Lget_info_by_idx_f",cset, H5T_CSET_ASCII_F, total_error) @@ -1371,7 +1350,7 @@ SUBROUTINE delete_by_idx(cleanup, fapl, total_error) !!$ ENDIF !!$ objname = 'fill '//chr2 !!$ PRINT*,objname, tmpname -!!$ CALL verifyString("delete_by_idx.H5Lget_name_by_idx_f", objname, tmpname, total_error) +!!$ CALL verify("delete_by_idx.H5Lget_name_by_idx_f", objname, tmpname, total_error) ENDDO ! Close the group @@ -1418,9 +1397,6 @@ END SUBROUTINE delete_by_idx SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & hard_link, use_index, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: group_id @@ -1455,14 +1431,14 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL H5Lget_info_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(0,HSIZE_T), & link_type, f_corder_valid, corder, cset, address, val_size, error) CALL check("H5Lget_info_by_idx_f", error, total_error) - CALL VERIFY("H5Lget_info_by_idx_f", corder, 0, total_error) + CALL verify("H5Lget_info_by_idx_f", corder, 0, total_error) ! Verify the link information for new link, in increasing creation order ! HDmemset(&linfo, 0, sizeof(linfo)); CALL H5Lget_info_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(n,HSIZE_T), & link_type, f_corder_valid, corder, cset, address, val_size, error) CALL check("H5Lget_info_by_idx_f", error, total_error) - CALL VERIFY("H5Lget_info_by_idx_f", corder, n, total_error) + CALL verify("H5Lget_info_by_idx_f", corder, n, total_error) ! Verify value for new soft link, in increasing creation order !!$ IF(hard_link)THEN @@ -1481,21 +1457,21 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL H5Lget_name_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(n,HSIZE_T), tmpname_small, error, size_tmp) CALL check("link_info_by_idx_check.H5Lget_name_by_idx_f", error, total_error) - CALL verifyString("link_info_by_idx_check.H5Lget_name_by_idx_f", & + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", & linkname(1:LEN(tmpname_small)), tmpname_small(1:LEN(tmpname_small)), total_error) - CALL VERIFY("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) ! try it with the correct size CALL H5Lget_name_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(n,HSIZE_T), tmpname, error, size=size_tmp) CALL check("link_info_by_idx_check.H5Lget_name_by_idx_f", error, total_error) - CALL verifyString("link_info_by_idx_check.H5Lget_name_by_idx_f", & + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", & linkname(1:LEN(tmpname)), tmpname(1:LEN(tmpname)), total_error) - CALL VERIFY("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) CALL H5Lget_name_by_idx_f(group_id, ".", H5_INDEX_CRT_ORDER_F, H5_ITER_INC_F, INT(n,HSIZE_T), tmpname_big, error, size_tmp) CALL check("link_info_by_idx_check.H5Lget_name_by_idx_f", error, total_error) - CALL verifyString("link_info_by_idx_check.H5Lget_name_by_idx_f", & + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", & linkname(1:7), tmpname_big(1:7), total_error) - CALL VERIFY("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) + CALL verify("link_info_by_idx_check.H5Lget_name_by_idx_f", INT(size_tmp), 7, total_error) ! Try with a buffer set to small @@ -1522,9 +1498,6 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & SUBROUTINE test_lcpl(cleanup, fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -1591,7 +1564,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & ! * creation property list and is always ASCII. !#define H5F_DEFAULT_CSET H5T_CSET_ASCII -- FROM H5Fprivate.h -- - CALL VERIFY("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) + CALL verify("H5Lget_info_f",cset, H5T_CSET_ASCII_F,total_error) ! Create and commit a datatype with the default LCPL CALL h5tcopy_f(H5T_NATIVE_INTEGER, type_id, error) @@ -1652,10 +1625,10 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & DO i = 1, 2 tmp1 = INT(dimsout(i)) tmp2 = INT(extend_dim(i)) - CALL VERIFY("H5Sget_simple_extent_dims", tmp1, tmp2, total_error) + CALL verify("H5Sget_simple_extent_dims", tmp1, tmp2, total_error) tmp1 = INT(maxdimsout(i)) tmp2 = INT(dims(i)) - CALL VERIFY("H5Sget_simple_extent_dims", tmp1, tmp2, total_error) + CALL verify("H5Sget_simple_extent_dims", tmp1, tmp2, total_error) ENDDO ! close data set @@ -1722,7 +1695,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL H5Pget_char_encoding_f(lcpl_id, encoding, error) CALL check("H5Pget_char_encoding_f", error, total_error) - CALL VERIFY("H5Pget_char_encoding_f", encoding, H5T_CSET_UTF8_F, total_error) + CALL verify("H5Pget_char_encoding_f", encoding, H5T_CSET_UTF8_F, total_error) ! Check that its character encoding is UTF-8 CALL H5Lget_info_f(file_id, "dataset2", & @@ -1744,7 +1717,7 @@ SUBROUTINE link_info_by_idx_check(group_id, linkname, n, & CALL H5Lexists_f(file_id,"/dataset2_link",Lexists, error) CALL check("H5Lexists",error, total_error) - CALL verifylogical("H5Lexists", Lexists,.TRUE.,total_error) + CALL verify("H5Lexists", Lexists,.TRUE.,total_error) ! Check that its character encoding is ASCII CALL H5Lget_info_f(file_id, "/dataset2_link", & @@ -1834,9 +1807,6 @@ END SUBROUTINE test_lcpl SUBROUTINE objcopy(fapl, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error INTEGER(HID_T), INTENT(IN) :: fapl @@ -1867,7 +1837,7 @@ SUBROUTINE objcopy(fapl, total_error) ! Verify object copy flags CALL H5Pget_copy_object_f(pid, cpy_flags, error) CALL check("H5Pget_copy_object_f",error, total_error) - CALL VERIFY("H5Pget_copy_object_f", cpy_flags, flag, total_error) + CALL verify("H5Pget_copy_object_f", cpy_flags, flag, total_error) !!$ !!$ CALL test_copy_option(fcpl_src, fcpl_dst, my_fapl, H5O_COPY_WITHOUT_ATTR_FLAG, @@ -1898,9 +1868,6 @@ END SUBROUTINE objcopy SUBROUTINE lapl_nlinks( fapl, total_error) - USE HDF5 - USE TH5_MISC - IMPLICIT NONE INTEGER(HID_T), INTENT(IN) :: fapl INTEGER, INTENT(INOUT) :: total_error @@ -1972,7 +1939,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) nlinks = 0 CALL H5Pget_nlinks_f(plist, nlinks, error) CALL check("H5Pset_nlinks_f",error,total_error) - CALL VERIFY("H5Pset_nlinks_f",INT(nlinks), 20, total_error) + CALL verify("H5Pset_nlinks_f",INT(nlinks), 20, total_error) ! Open object through what is normally too many soft links using @@ -1984,7 +1951,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) ! Check name CALL h5iget_name_f(gid, objname, buf_size, name_len, error) CALL check("h5iget_name_f",error,total_error) - CALL VerifyString("h5iget_name_f", TRIM(objname),"/soft17", total_error) + CALL verify("h5iget_name_f", TRIM(objname),"/soft17", total_error) ! Create group using soft link CALL H5Gcreate_f(gid, "new_soft", gid2, error) CALL check("H5Gcreate_f", error, total_error) @@ -2006,12 +1973,12 @@ SUBROUTINE lapl_nlinks( fapl, total_error) CALL H5Pget_nlinks_f(plist, nlinks, error) CALL check("H5Pget_nlinks_f",error,total_error) - CALL VERIFY("H5Pget_nlinks_f", INT(nlinks), 4, total_error) + CALL verify("H5Pget_nlinks_f", INT(nlinks), 4, total_error) ! Try opening through what is now too many soft links CALL H5Oopen_f(fid,"soft5",gid,error,plist) - CALL VERIFY("H5Oopen_f", error, -1, total_error) ! should fail + CALL verify("H5Oopen_f", error, -1, total_error) ! should fail ! Open object through lesser soft link CALL H5Oopen_f(fid,"soft4",gid,error,plist) @@ -2020,7 +1987,7 @@ SUBROUTINE lapl_nlinks( fapl, total_error) ! Check name CALL h5iget_name_f(gid, objname, buf_size, name_len, error) CALL check("h5iget_name_f",error,total_error) - CALL VerifyString("h5iget_name_f", TRIM(objname),"/soft4", total_error) + CALL verify("h5iget_name_f", TRIM(objname),"/soft4", total_error) ! Test other functions that should use a LAPL nlinks = 20 diff --git a/fortran/test/tH5I.f90 b/fortran/test/tH5I.f90 index 088b4eb..97c48c6 100644 --- a/fortran/test/tH5I.f90 +++ b/fortran/test/tH5I.f90 @@ -27,6 +27,10 @@ ! !***** MODULE TH5I + + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN CONTAINS @@ -34,8 +38,6 @@ CONTAINS ! This subroutine tests following functionalities: h5iget_type_f - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -88,7 +90,7 @@ CONTAINS dtype = -1 CALL H5Iis_valid_f(dtype, tri_ret, error) CALL check("H5Iis_valid_f", error, total_error) - CALL VerifyLogical("H5Iis_valid_f", tri_ret, .FALSE., total_error) + CALL verify("H5Iis_valid_f", tri_ret, .FALSE., total_error) ! Create a datatype id CALL H5Tcopy_f(H5T_NATIVE_INTEGER,dtype,error) @@ -97,7 +99,7 @@ CONTAINS ! Check that the ID is valid CALL H5Iis_valid_f(dtype, tri_ret, error) CALL check("H5Iis_valid_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", tri_ret, .TRUE., total_error) + CALL verify("H5Tequal_f", tri_ret, .TRUE., total_error) CALL H5Tclose_f(dtype, error) CALL check("H5Tclose_f", error, total_error) diff --git a/fortran/test/tH5L_F03.f90 b/fortran/test/tH5L_F03.f90 index 795f1e2..40afdbc 100644 --- a/fortran/test/tH5L_F03.f90 +++ b/fortran/test/tH5L_F03.f90 @@ -32,8 +32,10 @@ !***** MODULE liter_cb_mod - USE HDF5 - USE ISO_C_BINDING + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + USE, INTRINSIC :: ISO_C_BINDING IMPLICIT NONE TYPE iter_enum @@ -45,7 +47,7 @@ MODULE liter_cb_mod ! Custom group iteration callback data TYPE, bind(c) :: iter_info - CHARACTER(LEN=1), DIMENSION(1:10) :: name ! The name of the object + CHARACTER(KIND=C_CHAR), DIMENSION(1:10) :: name ! The name of the object INTEGER(c_int) :: TYPE ! The TYPE of the object INTEGER(c_int) :: command ! The TYPE of RETURN value END TYPE iter_info @@ -60,8 +62,6 @@ CONTAINS INTEGER(KIND=C_INT) FUNCTION liter_cb(group, name, link_info, op_data) bind(C) - USE HDF5 - USE ISO_C_BINDING IMPLICIT NONE INTEGER(HID_T), VALUE :: group @@ -123,9 +123,6 @@ CONTAINS !*************************************************************** SUBROUTINE test_iter_group(total_error) - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING USE liter_cb_mod IMPLICIT NONE @@ -251,11 +248,11 @@ SUBROUTINE test_iter_group(total_error) CALL H5Literate_f(file, H5_INDEX_NAME_F, H5_ITER_INC_F, idx, f1, f2, ret_value, error) IF(error.LT.0) EXIT ! Verify return value from iterator gets propagated correctly - CALL VERIFY("H5Literate", ret_value, 2, total_error) + CALL verify("H5Literate", ret_value, 2, total_error) ! Increment the number of times "2" is returned i = i + 1 ! Verify that the index is the correct value - CALL VERIFY("H5Literate", INT(idx), INT(i), total_error) + CALL verify("H5Literate", INT(idx), INT(i), total_error) IF(idx .GT.ndatasets+2)THEN PRINT*,"ERROR: Group iteration function walked too far!" ENDIF @@ -264,14 +261,14 @@ SUBROUTINE test_iter_group(total_error) DO j = 1, 10 ichr10(j:j) = info%name(j)(1:1) ENDDO - CALL verifystring("H5Literate_f", ichr10, lnames(INT(idx)), total_error) + CALL verify("H5Literate_f", ichr10, lnames(INT(idx)), total_error) IF(i.EQ.52)EXIT ! prints out error message otherwise (for gcc/gfortran/g95) not intel (why) -FIXME- scot END DO ! put check if did not walk far enough -scot FIXME IF(i .NE. (NDATASETS + 2)) THEN - CALL VERIFY("H5Literate_f", i, INT(NDATASETS + 2), total_error) + CALL verify("H5Literate_f", i, INT(NDATASETS + 2), total_error) PRINT*,"ERROR: Group iteration function didn't perform multiple iterations correctly" ENDIF @@ -288,13 +285,13 @@ SUBROUTINE test_iter_group(total_error) CALL H5Literate_f(file, H5_INDEX_NAME_F, H5_ITER_INC_F, idx, f1, f2, ret_value, error) IF(error.LT.0) EXIT - CALL VERIFY("H5Literate_f", ret_value, 1, total_error) + CALL verify("H5Literate_f", ret_value, 1, total_error) ! Increment the number of times "1" is returned i = i + 1 ! Verify that the index is the correct value - CALL VERIFY("H5Literate_f", INT(idx), INT(i+10), total_error) + CALL verify("H5Literate_f", INT(idx), INT(i+10), total_error) IF(idx .GT.ndatasets+2)THEN PRINT*,"Group iteration function walked too far!" @@ -304,7 +301,7 @@ SUBROUTINE test_iter_group(total_error) ichr10(j:j) = info%name(j)(1:1) ENDDO ! Verify that the correct name is retrieved - CALL verifystring("H5Literate_f", ichr10, lnames(INT(idx)), total_error) + CALL verify("H5Literate_f", ichr10, lnames(INT(idx)), total_error) IF(i.EQ.42)EXIT ! prints out error message otherwise (for gcc/gfortran/g95) not intel (why) -FIX- scot ENDDO diff --git a/fortran/test/tH5MISC_1_8.f90 b/fortran/test/tH5MISC_1_8.f90 index efaf594..ba3f095 100644 --- a/fortran/test/tH5MISC_1_8.f90 +++ b/fortran/test/tH5MISC_1_8.f90 @@ -25,11 +25,13 @@ !***** MODULE TH5MISC_1_8 + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE dtransform(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -57,22 +59,22 @@ SUBROUTINE dtransform(cleanup, total_error) CALL H5Pget_data_transform_f(dxpl_id_c_to_f, ptrgetTest, error, size=size) CALL check("dtransform.H5Pget_data_transform_f", error, total_error) - CALL VerifyString("dtransform.H5Pget_data_transform_f", c_to_f, ptrgetTest, total_error) - CALL VERIFY("dtransform.H5Pget_data_transform_f", INT(size),15, total_error) + CALL verify("dtransform.H5Pget_data_transform_f", c_to_f, ptrgetTest, total_error) + CALL verify("dtransform.H5Pget_data_transform_f", INT(size),15, total_error) ! check case when receiving buffer to small CALL H5Pget_data_transform_f(dxpl_id_c_to_f, ptrgetTest_small, error, size=size) CALL check("dtransform.H5Pget_data_transform_f", error, total_error) - CALL VerifyString("dtransform.H5Pget_data_transform_f", c_to_f(1:7), ptrgetTest_small, total_error) - CALL VERIFY("dtransform.H5Pget_data_transform_f", INT(size),15, total_error) + CALL verify("dtransform.H5Pget_data_transform_f", c_to_f(1:7), ptrgetTest_small, total_error) + CALL verify("dtransform.H5Pget_data_transform_f", INT(size),15, total_error) ! check case when receiving buffer to big CALL H5Pget_data_transform_f(dxpl_id_c_to_f, ptrgetTest_big, error, size=size) CALL check("dtransform.H5Pget_data_transform_f", error, total_error) - CALL VerifyString("dtransform.H5Pget_data_transform_f", c_to_f(1:15), ptrgetTest_big(1:15), total_error) - CALL VERIFY("dtransform.H5Pget_data_transform_f", INT(size), 15, total_error) + CALL verify("dtransform.H5Pget_data_transform_f", c_to_f(1:15), ptrgetTest_big(1:15), total_error) + CALL verify("dtransform.H5Pget_data_transform_f", INT(size), 15, total_error) CALL H5Fclose_f(file_id, error) CALL check("H5Fclose_f", error, total_error) @@ -92,9 +94,6 @@ END SUBROUTINE dtransform SUBROUTINE test_genprop_basic_class(total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -117,7 +116,7 @@ SUBROUTINE test_genprop_basic_class(total_error) cid1 = 456 CALL H5Pget_class_name_f(cid1, name, size, error) - CALL VERIFY("H5Pget_class_name", error, -1, error) + CALL verify("H5Pget_class_name", error, -1, error) ! Create a new generic class, derived from the root of the class hierarchy CALL H5Pcreate_class_f(H5P_ROOT_F, CLASS1_NAME, cid1, error) @@ -126,8 +125,8 @@ SUBROUTINE test_genprop_basic_class(total_error) ! Check class name CALL H5Pget_class_name_f(cid1, name, size, error) CALL check("H5Pget_class_name", error, total_error) - CALL VERIFY("H5Pget_class_name", size,7,error) - CALL verifystring("H5Pget_class_name", name, CLASS1_NAME, error) + CALL verify("H5Pget_class_name", size,7,error) + CALL verify("H5Pget_class_name", name, CLASS1_NAME, error) IF(error.NE.0)THEN WRITE(*,*) 'Class names do not match! name=',name, 'CLASS1_NAME=',CLASS1_NAME total_error = total_error + 1 @@ -136,8 +135,8 @@ SUBROUTINE test_genprop_basic_class(total_error) ! Check class name smaller buffer CALL H5Pget_class_name_f(cid1, name_small, size, error) CALL check("H5Pget_class_name", error, total_error) - CALL VERIFY("H5Pget_class_name", size,7,error) - CALL verifystring("H5Pget_class_name", name_small(1:4), CLASS1_NAME(1:4), error) + CALL verify("H5Pget_class_name", size,7,error) + CALL verify("H5Pget_class_name", name_small(1:4), CLASS1_NAME(1:4), error) IF(error.NE.0)THEN WRITE(*,*) 'Class names do not match! name=',name_small(1:4), 'CLASS1_NAME=',CLASS1_NAME(1:4) total_error = total_error + 1 @@ -146,8 +145,8 @@ SUBROUTINE test_genprop_basic_class(total_error) ! Check class name bigger buffer CALL H5Pget_class_name_f(cid1, name_big, size, error) CALL check("H5Pget_class_name", error, total_error) - CALL VERIFY("H5Pget_class_name", size,7,error) - CALL verifystring("H5Pget_class_name", TRIM(name_big), TRIM(CLASS1_NAME), error) + CALL verify("H5Pget_class_name", size,7,error) + CALL verify("H5Pget_class_name", TRIM(name_big), TRIM(CLASS1_NAME), error) IF(error.NE.0)THEN WRITE(*,*) 'Class names do not match! name=',TRIM(name_small), 'CLASS1_NAME=',TRIM(CLASS1_NAME) total_error = total_error + 1 @@ -160,13 +159,13 @@ SUBROUTINE test_genprop_basic_class(total_error) ! Verify class parent correct CALL H5Pequal_f(cid2, H5P_ROOT_F, flag, error) CALL check("H5Pequal_f", error, total_error) - CALL verifylogical("H5Pequal_f", flag, .TRUE., total_error) + CALL verify("H5Pequal_f", flag, .TRUE., total_error) ! Make certain false postives aren't being returned CALL H5Pequal_f(cid2, H5P_FILE_CREATE_F, flag, error) CALL check("H5Pequal_f", error, total_error) - CALL verifylogical("H5Pequal_f", flag, .FALSE., total_error) + CALL verify("H5Pequal_f", flag, .FALSE., total_error) ! Close parent class CALL H5Pclose_class_f(cid2, error) @@ -187,8 +186,6 @@ SUBROUTINE test_h5s_encode(total_error) !** !*************************************************************** - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -241,7 +238,7 @@ SUBROUTINE test_h5s_encode(total_error) ! Try decoding bogus buffer CALL H5Sdecode_f(sbuf, decoded_sid1, error) - CALL VERIFY("H5Sdecode", error, -1, total_error) + CALL verify("H5Sdecode", error, -1, total_error) CALL H5Sencode_f(sid1, sbuf, sbuf_size, error) CALL check("H5Sencode", error, total_error) @@ -254,7 +251,7 @@ SUBROUTINE test_h5s_encode(total_error) ! Verify the decoded dataspace CALL h5sget_simple_extent_npoints_f(decoded_sid1, n, error) CALL check("h5sget_simple_extent_npoints_f", error, total_error) - CALL VERIFY("h5sget_simple_extent_npoints_f", INT(n), INT(SPACE1_DIM1 * SPACE1_DIM2 * SPACE1_DIM3), & + CALL verify("h5sget_simple_extent_npoints_f", INT(n), INT(SPACE1_DIM1 * SPACE1_DIM2 * SPACE1_DIM3), & total_error) ! @@ -297,16 +294,16 @@ SUBROUTINE test_h5s_encode(total_error) CALL H5Sget_simple_extent_type_f(decoded_sid3, space_type, error) CALL check("H5Sget_simple_extent_type_f", error, total_error) - CALL VERIFY("H5Sget_simple_extent_type_f", space_type, H5S_SCALAR_F, total_error) + CALL verify("H5Sget_simple_extent_type_f", space_type, H5S_SCALAR_F, total_error) ! Verify decoded dataspace CALL h5sget_simple_extent_npoints_f(decoded_sid3, n, error) CALL check("h5sget_simple_extent_npoints_f", error, total_error) - CALL VERIFY("h5sget_simple_extent_npoints_f", INT(n), 1, total_error) + CALL verify("h5sget_simple_extent_npoints_f", INT(n), 1, total_error) CALL H5Sget_simple_extent_ndims_f(decoded_sid3, rank, error) CALL CHECK("H5Sget_simple_extent_ndims_f", error, total_error) - CALL VERIFY("H5Sget_simple_extent_ndims_f", rank, 0, total_error ) + CALL verify("H5Sget_simple_extent_ndims_f", rank, 0, total_error ) CALL h5sclose_f(sid3, error) CALL check("h5sclose_f", error, total_error) @@ -335,8 +332,6 @@ END SUBROUTINE test_h5s_encode SUBROUTINE test_scaleoffset(cleanup, total_error ) - USE HDF5 - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error diff --git a/fortran/test/tH5O.f90 b/fortran/test/tH5O.f90 index 99d4c22..51e1d64 100644 --- a/fortran/test/tH5O.f90 +++ b/fortran/test/tH5O.f90 @@ -28,11 +28,13 @@ !***** MODULE TH5O + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE test_h5o(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -57,9 +59,6 @@ END SUBROUTINE test_h5o SUBROUTINE test_h5o_link(total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -157,7 +156,7 @@ SUBROUTINE test_h5o_link(total_error) CALL H5Tcommitted_f(type_id, committed, error) CALL check("H5Tcommitted_f",error,total_error) - CALL verifyLogical("H5Tcommitted_f", committed, .TRUE., total_error) + CALL verify("H5Tcommitted_f", committed, .TRUE., total_error) ! Create a dataset with no name using the committed datatype CALL H5Dcreate_anon_f(file_id, type_id, space_id, dset_id, error ) ! using no optional parameters @@ -181,7 +180,7 @@ SUBROUTINE test_h5o_link(total_error) ! Verify the data DO i = 1, TEST6_DIM1 DO j = 1, TEST6_DIM2 - CALL VERIFY("H5Dread_f",wdata(i,j),rdata(i,j),total_error) + CALL verify("H5Dread_f",wdata(i,j),rdata(i,j),total_error) wdata(i,j) = i*j ENDDO ENDDO @@ -229,7 +228,7 @@ SUBROUTINE test_h5o_link(total_error) ! Verify the data DO i = 1, TEST6_DIM1 DO j = 1, TEST6_DIM2 - CALL VERIFY("H5Dread",wdata(i,j),rdata(i,j),total_error) + CALL verify("H5Dread",wdata(i,j),rdata(i,j),total_error) ENDDO ENDDO ! Close open IDs @@ -464,7 +463,7 @@ SUBROUTINE test_h5o_link(total_error) nlinks = 0 CALL h5pget_nlinks_f(plist, nlinks, error) CALL check("h5pget_nlinks_f",error,total_error) - CALL VERIFY("h5pget_nlinks_f", INT(nlinks), 2, total_error) + CALL verify("h5pget_nlinks_f", INT(nlinks), 2, total_error) ! See if the link exists CALL h5oexists_by_name_f(file_id,"/G1_LINK", link_exists, error, plist) @@ -578,9 +577,6 @@ END SUBROUTINE test_h5o_link SUBROUTINE test_h5o_plist(total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -631,18 +627,18 @@ SUBROUTINE test_h5o_plist(total_error) ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(tcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) ! Create a group, dataset, and committed datatype within the file, ! using the respective type of creation property lists. @@ -700,18 +696,18 @@ SUBROUTINE test_h5o_plist(total_error) ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(tcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) ! Close current objects CALL h5pclose_f(gcpl,error) @@ -757,18 +753,18 @@ SUBROUTINE test_h5o_plist(total_error) ! Retrieve attribute phase change values on each creation property list and verify CALL H5Pget_attr_phase_change_f(gcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(dcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) CALL H5Pget_attr_phase_change_f(tcpl, max_compact, min_dense, error) CALL check("H5Pget_attr_phase_change_f", error, total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) - CALL VERIFY("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", max_compact, (def_max_compact + 1), total_error) + CALL verify("H5Pget_attr_phase_change_f", min_dense, (def_min_dense - 1), total_error) ! Close current objects CALL h5pclose_f(gcpl,error) diff --git a/fortran/test/tH5O_F03.f90 b/fortran/test/tH5O_F03.f90 index 8e014f4..834308b 100644 --- a/fortran/test/tH5O_F03.f90 +++ b/fortran/test/tH5O_F03.f90 @@ -31,7 +31,7 @@ MODULE visit_cb USE HDF5 - USE ISO_C_BINDING + USE, INTRINSIC :: ISO_C_BINDING IMPLICIT NONE @@ -53,7 +53,7 @@ MODULE visit_cb ! ! Object visit structs TYPE, bind(c) :: obj_visit_t - CHARACTER(LEN=1), DIMENSION(1:180) :: path ! Path to object + CHARACTER(KIND=C_CHAR), DIMENSION(1:180) :: path ! Path to object INTEGER :: type_obj ! type of object END TYPE obj_visit_t diff --git a/fortran/test/tH5P.f90 b/fortran/test/tH5P.f90 index 7dcc580..39d8c1e 100644 --- a/fortran/test/tH5P.f90 +++ b/fortran/test/tH5P.f90 @@ -27,6 +27,9 @@ ! !***** MODULE TH5P + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN CONTAINS @@ -36,8 +39,6 @@ SUBROUTINE external_test(cleanup, total_error) ! h5pset_external_f, h5pget_external_count_f, ! h5pget_external_f - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -153,8 +154,6 @@ SUBROUTINE external_test(cleanup, total_error) END SUBROUTINE external_test SUBROUTINE multi_file_test(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -421,10 +420,7 @@ END SUBROUTINE multi_file_test ! April 16, 2009 !------------------------------------------------------------------------- ! -SUBROUTINE test_chunk_cache(cleanup, total_error) - - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC +SUBROUTINE test_chunk_cache(cleanup, total_error) IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -470,19 +466,16 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Pget_cache_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl1, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_1), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_1), INT(nbytes_4), total_error) - - IF( .NOT.dreal_eq( REAL(w0_1,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", nslots_1, nslots_4, total_error) + CALL verify("H5Pget_chunk_cache_f", nbytes_1, nbytes_4, total_error) + CALL verify("H5Pget_chunk_cache_f", w0_1, w0_4, total_error) ! Set a lapl property on dapl1 (to verify inheritance) CALL H5Pset_nlinks_f(dapl1, 134_size_t , error) CALL check("H5Pset_nlinks_f", error, total_error) CALL H5Pget_nlinks_f(dapl1, nlinks, error) CALL check("H5Pget_nlinks_f", error, total_error) - CALL VERIFY("H5Pget_nlinks_f", INT(nlinks), 134, total_error) + CALL verify("H5Pget_nlinks_f", INT(nlinks), 134, total_error) CALL h5pcreate_f(H5P_FILE_ACCESS_F, fapl_local, error) @@ -529,11 +522,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_2,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) @@ -561,11 +552,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_3), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_3,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f4", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_3), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_3, w0_4, total_error) CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) @@ -581,11 +570,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_2,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) CALL H5Pclose_f(dapl2,error) CALL check("H5Pclose_f", error, total_error) @@ -601,11 +588,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_2,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) ! Don't close dapl2, we will use it in the next section ! Modify cache values on fapl_local @@ -638,11 +623,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_2,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_2), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_2, w0_4, total_error) ! Test H5D_CHUNK_CACHE_NSLOTS_DEFAULT and H5D_CHUNK_CACHE_W0_DEFAULT nslots_2 = H5D_CHUNK_CACHE_NSLOTS_DFLT_F @@ -663,11 +646,9 @@ SUBROUTINE test_chunk_cache(cleanup, total_error) CALL check("H5Dget_access_plist_f", error, total_error) CALL H5Pget_chunk_cache_f(dapl2, nslots_4, nbytes_4, w0_4, error) CALL check("H5Pget_chunk_cache_f", error, total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nslots_3), INT(nslots_4), total_error) - CALL VERIFY("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) - IF( .NOT.dreal_eq( REAL(w0_3,dp), REAL( w0_4, dp)) ) THEN - CALL VERIFYlogical("H5Pget_chunk_cache_f", .TRUE., .FALSE., total_error) - ENDIF + CALL verify("H5Pget_chunk_cache_f", INT(nslots_3), INT(nslots_4), total_error) + CALL verify("H5Pget_chunk_cache_f", INT(nbytes_2), INT(nbytes_4), total_error) + CALL verify("H5Pget_chunk_cache_f", w0_3, w0_4, total_error) ! Close diff --git a/fortran/test/tH5P_F03.f90 b/fortran/test/tH5P_F03.f90 index 56f9679..ec9fef2 100644 --- a/fortran/test/tH5P_F03.f90 +++ b/fortran/test/tH5P_F03.f90 @@ -52,8 +52,6 @@ CONTAINS INTEGER FUNCTION test_genprop_cls_cb1_f(list_id, create_data ) bind(C) - USE HDF5 - USE ISO_C_BINDING IMPLICIT NONE INTEGER(HID_T), INTENT(IN), VALUE :: list_id @@ -71,6 +69,11 @@ END MODULE test_genprop_cls_cb1_mod MODULE TH5P_F03 + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + USE ISO_C_BINDING + CONTAINS !------------------------------------------------------------------------- @@ -92,9 +95,6 @@ CONTAINS SUBROUTINE test_create(total_error) - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -187,18 +187,12 @@ SUBROUTINE test_create(total_error) CALL check("H5Pset_fill_value_f",error, total_error) CALL h5pget_fill_value_f(dcpl, H5T_NATIVE_DOUBLE, dpfill, error) CALL check("H5Pget_fill_value_f",error, total_error) - IF(.NOT.dreal_eq( REAL(dpfill,dp), 1.0_dp))THEN - PRINT*,"***ERROR: Returned wrong fill value (double)" - total_error = total_error + 1 - ENDIF + CALL VERIFY("***ERROR: Returned wrong fill value (double)", dpfill, 1.0_dp, total_error) CALL H5Pset_fill_value_f(dcpl, H5T_NATIVE_REAL, 2.0, error) CALL check("H5Pset_fill_value_f",error, total_error) CALL h5pget_fill_value_f(dcpl, H5T_NATIVE_REAL, rfill, error) CALL check("H5Pget_fill_value_f",error, total_error) - IF(.NOT.dreal_eq( REAL(rfill,dp), REAL(2.0,dp)))THEN - PRINT*,"***ERROR: Returned wrong fill value (real)" - total_error = total_error + 1 - ENDIF + CALL VERIFY("***ERROR: Returned wrong fill value (real)", rfill, 2.0, total_error) ! For the actual compound type CALL H5Pset_fill_value_f(dcpl, comp_type_id, f_ptr, error) @@ -234,10 +228,10 @@ SUBROUTINE test_create(total_error) CALL H5Pget_fill_value_f(dcpl, comp_type_id, f_ptr, error) CALL check("H5Pget_fill_value_f", error, total_error) + CALL verify("***ERROR: Returned wrong fill value", rd_c%a, fill_ctype%a, total_error) + CALL verify("***ERROR: Returned wrong fill value", rd_c%y, fill_ctype%y, total_error) - IF( .NOT.dreal_eq( REAL(rd_c%a,dp), REAL(fill_ctype%a, dp)) .OR. & - .NOT.dreal_eq( REAL(rd_c%y,dp), REAL(fill_ctype%y, dp)) .OR. & - rd_c%x .NE. fill_ctype%x .OR. & + IF( rd_c%x .NE. fill_ctype%x .OR. & rd_c%z .NE. fill_ctype%z )THEN PRINT*,"***ERROR: Returned wrong fill value" @@ -269,9 +263,6 @@ SUBROUTINE test_genprop_class_callback(total_error) ! ! - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING USE test_genprop_cls_cb1_mod IMPLICIT NONE @@ -330,7 +321,7 @@ SUBROUTINE test_genprop_class_callback(total_error) ! Check the number of properties in class CALL h5pget_nprops_f(cid1, nprops, error) CALL check("h5pget_nprops_f", error, total_error) - CALL VERIFY("h5pget_nprops_f", INT(nprops), 4, total_error) + CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) ! Initialize class callback structs @@ -350,12 +341,12 @@ SUBROUTINE test_genprop_class_callback(total_error) ! Check that the list's class is correct CALL H5Pequal_f(cid2, cid1, flag, error) CALL check("H5Pequal_f", error, total_error) - CALL verifylogical("H5Pequal_f", flag, .TRUE., total_error) + CALL verify("H5Pequal_f", flag, .TRUE., total_error) ! Check the class name CALL H5Pget_class_name_f(cid2, CLASS1_NAME_BUF, CLASS1_NAME_SIZE, error) CALL check("H5Pget_class_name_f", error, total_error) - CALL verifystring("H5Pget_class_name_f", CLASS1_NAME_BUF, CLASS1_NAME, error) + CALL verify("H5Pget_class_name_f", CLASS1_NAME_BUF, CLASS1_NAME, error) IF(error.NE.0)THEN WRITE(*,*) 'Class names do not match! name=',CLASS1_NAME_BUF, 'CLASS1_NAME=',CLASS1_NAME total_error = total_error + 1 @@ -365,42 +356,42 @@ SUBROUTINE test_genprop_class_callback(total_error) CALL check("h5pclose_class_f", error, total_error) ! Verify that the creation callback occurred - CALL VERIFY("h5pcreate_f", crt_cb_struct%count, 1, total_error) - CALL VERIFY_INTEGER_HID_T("h5pcreate_f", crt_cb_struct%id, lid1, total_error) + CALL verify("h5pcreate_f", crt_cb_struct%count, 1, total_error) + CALL verify("h5pcreate_f", crt_cb_struct%id, lid1, total_error) ! Check the number of properties in list CALL h5pget_nprops_f(lid1,nprops, error) CALL check("h5pget_nprops_f", error, total_error) - CALL VERIFY("h5pget_nprops_f", INT(nprops), 4, total_error) + CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) ! Create another property list from the class CALL h5pcreate_f(cid1, lid2, error) CALL check("h5pcreate_f", error, total_error) ! Verify that the creation callback occurred - CALL VERIFY("h5pcreate_f", crt_cb_struct%count, 2, total_error) - CALL VERIFY_INTEGER_HID_T("h5pcreate_f", crt_cb_struct%id, lid2, total_error) + CALL verify("h5pcreate_f", crt_cb_struct%count, 2, total_error) + CALL verify("h5pcreate_f", crt_cb_struct%id, lid2, total_error) ! Check the number of properties in list CALL h5pget_nprops_f(lid2,nprops, error) CALL check("h5pget_nprops_f", error, total_error) - CALL VERIFY("h5pget_nprops_f", INT(nprops), 4, total_error) + CALL verify("h5pget_nprops_f", INT(nprops), 4, total_error) ! Close first list CALL h5pclose_f(lid1, error); CALL check("h5pclose_f", error, total_error) ! Verify that the close callback occurred - CALL VERIFY("h5pcreate_f", cls_cb_struct%count, 1, total_error) - CALL VERIFY_INTEGER_HID_T("h5pcreate_f", cls_cb_struct%id, lid1, total_error) + CALL verify("h5pcreate_f", cls_cb_struct%count, 1, total_error) + CALL verify("h5pcreate_f", cls_cb_struct%id, lid1, total_error) ! Close second list CALL h5pclose_f(lid2, error); CALL check("h5pclose_f", error, total_error) ! Verify that the close callback occurred - CALL VERIFY("h5pcreate_f", cls_cb_struct%count, 2, total_error) - CALL verify_INTEGER_HID_T("h5pcreate_f", cls_cb_struct%id, lid2, total_error) + CALL verify("h5pcreate_f", cls_cb_struct%count, 2, total_error) + CALL verify("h5pcreate_f", cls_cb_struct%id, lid2, total_error) ! Close class CALL h5pclose_class_f(cid1, error) @@ -423,8 +414,6 @@ END SUBROUTINE test_genprop_class_callback SUBROUTINE test_h5p_file_image(total_error) - USE HDF5 - USE TH5_MISC USE, INTRINSIC :: iso_c_binding IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -475,11 +464,11 @@ SUBROUTINE test_h5p_file_image(total_error) CALL check("h5pget_file_image_f", error, total_error) ! Check that sizes are the same, and that the buffers are identical but separate - CALL VERIFY("h5pget_file_image_f", INT(temp_size), INT(size), total_error) + CALL verify("h5pget_file_image_f", INT(temp_size), INT(size), total_error) ! Verify the image data is correct DO i = 1, count - CALL VERIFY("h5pget_file_image_f", temp(i), buffer(i), total_error) + CALL verify("h5pget_file_image_f", temp(i), buffer(i), total_error) ENDDO END SUBROUTINE test_h5p_file_image @@ -499,10 +488,6 @@ END SUBROUTINE test_h5p_file_image ! SUBROUTINE external_test_offset(cleanup,total_error) - USE ISO_C_BINDING - USE TH5_MISC - USE HDF5 ! This module contains all necessary modules - IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error LOGICAL, INTENT(IN) :: cleanup diff --git a/fortran/test/tH5R.f90 b/fortran/test/tH5R.f90 index bd6264f..ef392b4 100644 --- a/fortran/test/tH5R.f90 +++ b/fortran/test/tH5R.f90 @@ -33,11 +33,13 @@ ! MODULE TH5R + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE refobjtest(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error @@ -125,7 +127,6 @@ SUBROUTINE refobjtest(cleanup, total_error) CALL check("h5tcopy_f",error,total_error) CALL h5tcommit_f(file_id, "MyType", type_id, error) CALL check("h5tcommit_f",error,total_error) - ! ! Close dataspaces, groups and integer dataset ! @@ -164,22 +165,22 @@ SUBROUTINE refobjtest(cleanup, total_error) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),7, total_error) - CALL VerifyString("H5Rget_name_f", buf, "/GROUP1", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),7, total_error) + CALL verify("H5Rget_name_f", buf, "/GROUP1", total_error) ! with buffer bigger then needed CALL H5Rget_name_f(dsetr_id, ref(1), buf_big, error, buf_size ) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),7,total_error) - CALL VerifyString("H5Rget_name_f", TRIM(buf_big), "/GROUP1", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),7,total_error) + CALL verify("H5Rget_name_f", TRIM(buf_big), "/GROUP1", total_error) ! getting path to dataset in /Group1 CALL H5Rget_name_f(dsetr_id, ref(2), buf_big, error, buf_size ) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),14,total_error) - CALL VerifyString("H5Rget_name_f", TRIM(buf_big), "/GROUP1/GROUP2", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),14,total_error) + CALL verify("H5Rget_name_f", TRIM(buf_big), "/GROUP1/GROUP2", total_error) ! !Close the dataset @@ -233,7 +234,6 @@ SUBROUTINE refobjtest(cleanup, total_error) CALL h5fclose_f(file_id, error) CALL check("h5fclose_f",error,total_error) - IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) CALL check("h5_cleanup_f", error, total_error) RETURN @@ -244,9 +244,6 @@ END SUBROUTINE refobjtest ! and h5rdereference_f functionalities ! SUBROUTINE refregtest(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC -! use iso_c_binding ! NOTE: if this is uncommented, then need to move subroutine into another file. IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -408,23 +405,23 @@ SUBROUTINE refregtest(cleanup, total_error) ! Get name of the dataset the first region reference points to using H5Rget_name_f CALL H5Rget_name_f(dsetr_id, ref_out(1), buf, error, buf_size ) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),7,total_error) - CALL VerifyString("H5Rget_name_f", buf, "/MATRIX", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),7,total_error) + CALL verify("H5Rget_name_f", buf, "/MATRIX", total_error) ! Get name of the dataset the first region reference points to using H5Rget_name_f ! buffer bigger then needed CALL H5Rget_name_f(dsetr_id, ref_out(1), buf_big, error, buf_size ) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),7,total_error) - CALL VerifyString("H5Rget_name_f", TRIM(buf_big), "/MATRIX", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),7,total_error) + CALL verify("H5Rget_name_f", TRIM(buf_big), "/MATRIX", total_error) ! Get name of the dataset the first region reference points to using H5Rget_name_f ! buffer smaller then needed CALL H5Rget_name_f(dsetr_id, ref_out(1), buf_small, error, buf_size ) CALL check("H5Rget_name_f", error, total_error) - CALL VERIFY("H5Rget_name_f", INT(buf_size),7,total_error) - CALL VerifyString("H5Rget_name_f", TRIM(buf_small), "/MAT", total_error) + CALL verify("H5Rget_name_f", INT(buf_size),7,total_error) + CALL verify("H5Rget_name_f", TRIM(buf_small), "/MAT", total_error) ! ! Dereference the first reference. ! @@ -436,7 +433,7 @@ SUBROUTINE refregtest(cleanup, total_error) ! Get name of the dataset the second region reference points to using H5Rget_name_f CALL H5Rget_name_f(dsetr_id, ref_out(2), buf, error) ! no optional size CALL check("H5Rget_name_f", error, total_error) - CALL VerifyString("H5Rget_name_f", TRIM(buf), "/MATRIX", total_error) + CALL verify("H5Rget_name_f", TRIM(buf), "/MATRIX", total_error) ! ! Read selected data from the dataset. ! diff --git a/fortran/test/tH5S.f90 b/fortran/test/tH5S.f90 index eaaf29a..7223772 100644 --- a/fortran/test/tH5S.f90 +++ b/fortran/test/tH5S.f90 @@ -35,12 +35,14 @@ !***** MODULE TH5S + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE dataspace_basic_test(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup diff --git a/fortran/test/tH5Sselect.f90 b/fortran/test/tH5Sselect.f90 index 7d07308..aeb80e9 100644 --- a/fortran/test/tH5Sselect.f90 +++ b/fortran/test/tH5Sselect.f90 @@ -38,13 +38,14 @@ !***** MODULE TH5SSELECT + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE test_select_hyperslab(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup INTEGER, INTENT(INOUT) :: total_error @@ -699,8 +700,6 @@ CONTAINS SUBROUTINE test_basic_select(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -1036,8 +1035,6 @@ CONTAINS !*************************************************************** SUBROUTINE test_select_point(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -1140,9 +1137,9 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error) ENDDO CALL H5Sget_select_npoints_f(sid1, npoints, error) @@ -1171,9 +1168,9 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(1,i)), INT(coord1(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(2,i)), INT(coord1(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord1(3,i)), INT(coord1(3,i)), total_error) ENDDO CALL H5Sget_select_npoints_f(sid1, npoints, error) @@ -1202,8 +1199,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error) ENDDO !!$ @@ -1238,8 +1235,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(1,i)), INT(coord2(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord2(2,i)), INT(coord2(2,i)), total_error) ENDDO CALL H5Sget_select_npoints_f(sid2, npoints, error) @@ -1284,8 +1281,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sget_select_elem_pointlist_f(sid2, INT(0,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error) ENDDO CALL H5Sget_select_npoints_f(sid2, npoints, error) @@ -1311,8 +1308,8 @@ SUBROUTINE test_select_point(cleanup, total_error) CALL h5sget_select_elem_pointlist_f(sid2, INT(POINT1_NPOINTS,hsize_t), INT(POINT1_NPOINTS,hsize_t),temp_coord3,error) CALL check("h5sget_select_elem_pointlist_f", error, total_error) DO i= 1, POINT1_NPOINTS - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error) - CALL VERIFY("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(1,i)), INT(coord3(1,i)), total_error) + CALL verify("h5sget_select_elem_pointlist_f", INT(temp_coord3(2,i)), INT(coord3(2,i)), total_error) ENDDO CALL H5Sget_select_npoints_f(sid2, npoints, error) @@ -1363,8 +1360,6 @@ END SUBROUTINE test_select_point !*************************************************************** SUBROUTINE test_select_combine(total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -1400,7 +1395,7 @@ SUBROUTINE test_select_combine(total_error) CALL H5Sget_select_type_f(all_id, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) ! Copy base dataspace and set selection to "none" CALL h5scopy_f(base_id, none_id, error) @@ -1411,7 +1406,7 @@ SUBROUTINE test_select_combine(total_error) CALL H5Sget_select_type_f(none_id, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_NONE_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_NONE_F), total_error) ! Copy "all" selection & space CALL H5Scopy_f(all_id, space1, error) @@ -1429,7 +1424,7 @@ SUBROUTINE test_select_combine(total_error) ! Verify that it's still "all" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT(H5S_SEL_ALL_F), total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1451,12 +1446,12 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the same at the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) ! Retrieve the block defined CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) @@ -1464,10 +1459,10 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the correct block is defined - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1490,12 +1485,12 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is an inversion of the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there are two blocks CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) ! Retrieve the block defined @@ -1507,19 +1502,19 @@ SUBROUTINE test_select_combine(total_error) ! No guarantee is implied as the order in which blocks are listed. ! So this will ONLY work for square domains iblock(1:2) = (/5,5/) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 10, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)), 10, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)), 10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)), 10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)), 10, total_error) ! Otherwise make sure the "area" of the block is correct area = (ABS(INT(blocks(1,1,1)-blocks(3,1,1)))+1)*(ABS(INT(blocks(2,1,1)-blocks(4,1,1)))+1) area = area + (ABS(INT(blocks(5,1,1)-blocks(7,1,1)))+1)*(ABS(INT(blocks(6,1,1)-blocks(8,1,1)))+1) - CALL VERIFY("h5sget_select_hyper_blocklist_f", area, 80, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1542,12 +1537,12 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is an inversion of the original block CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there are two blocks CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 2, total_error) ! Retrieve the block defined blocks = -1 ! Reset block list @@ -1559,19 +1554,19 @@ SUBROUTINE test_select_combine(total_error) ! No guarantee is implied as the order in which blocks are listed. ! So this will ONLY work for square domains iblock(1:2) = (/5,5/) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)),10, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)),10, total_error) -!!$ CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)),10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 5, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)),10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(5,1,1)), 6, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(6,1,1)), 1, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(7,1,1)),10, total_error) +!!$ CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(8,1,1)),10, total_error) ! Otherwise make sure the "area" of the block is correct area = (ABS(INT(blocks(1,1,1)-blocks(3,1,1)))+1)*(ABS(INT(blocks(2,1,1)-blocks(4,1,1)))+1) area = area + (ABS(INT(blocks(5,1,1)-blocks(7,1,1)))+1)*(ABS(INT(blocks(6,1,1)-blocks(8,1,1)))+1) - CALL VERIFY("h5sget_select_hyper_blocklist_f", area, 80, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", area, 80, total_error) ! Close temporary dataspace @@ -1594,7 +1589,7 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1617,13 +1612,13 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) ! Retrieve the block defined blocks = -1 ! Reset block list @@ -1631,10 +1626,10 @@ SUBROUTINE test_select_combine(total_error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) ! Verify that the correct block is defined - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1657,7 +1652,7 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1680,23 +1675,23 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there is only one block CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) ! Retrieve the block defined blocks = -1 ! Reset block list CALL h5sget_select_hyper_blocklist_f(space1, INT(0, hsize_t), INT(nblocks,hsize_t), blocks, error) CALL check("h5sget_select_hyper_blocklist_f", error, total_error) ! Verify that the correct block is defined - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1719,7 +1714,7 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the "none" selection CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_NONE_F), total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1741,12 +1736,12 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the new selection is the same as the original hyperslab CALL H5Sget_select_type_f(space1, sel_type, error) CALL check("H5Sget_select_type_f", error, total_error) - CALL VERIFY("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) + CALL verify("H5Sget_select_type_f", INT(sel_type), INT( H5S_SEL_HYPERSLABS_F), total_error) ! Verify that there is ONLY one BLOCK CALL h5sget_select_hyper_nblocks_f(space1, nblocks, error) CALL check("h5sget_select_hyper_nblocks_f", error, total_error) - CALL VERIFY("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) + CALL verify("h5sget_select_hyper_nblocks_f", INT(nblocks), 1, total_error) ! Retrieve the block defined @@ -1757,10 +1752,10 @@ SUBROUTINE test_select_combine(total_error) ! Verify that the correct block is defined - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) - CALL VERIFY("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(1,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(2,1,1)), 1, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(3,1,1)), 5, total_error) + CALL verify("h5sget_select_hyper_blocklist_f", INT(blocks(4,1,1)), 4, total_error) ! Close temporary dataspace CALL h5sclose_f(space1, error) @@ -1785,8 +1780,6 @@ END SUBROUTINE test_select_combine !*************************************************************** SUBROUTINE test_select_bounds(total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE INTEGER, INTENT(INOUT) :: total_error @@ -1817,10 +1810,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), SPACE11_DIM1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), SPACE11_DIM2, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error) ! Set offset for selection offset(1:2) = 1 @@ -1831,10 +1824,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL verify("h5sget_select_bounds_f", INT(low_bounds(1)), 1, total_error) - CALL verify("h5sget_select_bounds_f", INT(low_bounds(2)), 1, total_error) - CALL verify("h5sget_select_bounds_f", INT(high_bounds(1)), SPACE11_DIM1, total_error) - CALL verify("h5sget_select_bounds_f", INT(high_bounds(2)), SPACE11_DIM2, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error) + CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1, hsize_t), total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2, hsize_t), total_error) ! Reset offset for selection offset(1:2) = 0 @@ -1847,7 +1840,7 @@ SUBROUTINE test_select_bounds(total_error) ! Get bounds for 'none' selection, should fail CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) - CALL VERIFY("h5sget_select_bounds_f", error, -1, total_error) + CALL verify("h5sget_select_bounds_f", error, -1, total_error) ! Set point selection @@ -1863,10 +1856,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), INT(SPACE11_DIM1-4), total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), INT(SPACE11_DIM2-4), total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error) + CALL VERIFY("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-4,hsize_t), total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-4,hsize_t), total_error) ! Set bad offset for selection @@ -1876,7 +1869,7 @@ SUBROUTINE test_select_bounds(total_error) ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) - CALL VERIFY("h5sget_select_bounds_f", error, -1, total_error) + CALL verify("h5sget_select_bounds_f", error, -1, total_error) ! Set valid offset for selection offset(1:2) = (/2,-2/) @@ -1887,10 +1880,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 5, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), INT(SPACE11_DIM1-2), total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), INT(SPACE11_DIM2-6), total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 5_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), INT(SPACE11_DIM1-2,hsize_t), total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), INT(SPACE11_DIM2-6,hsize_t), total_error) ! Reset offset for selection offset(1:2) = 0 @@ -1911,10 +1904,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), 37, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), 37, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), 37_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), 37_hsize_t, total_error) ! Set bad offset for selection offset(1:2) = (/5,-5/) @@ -1923,7 +1916,7 @@ SUBROUTINE test_select_bounds(total_error) ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) - CALL VERIFY("h5sget_select_bounds_f", error, -1, total_error) + CALL verify("h5sget_select_bounds_f", error, -1, total_error) ! Set valid offset for selection offset(1:2) = (/5,-2/) @@ -1934,10 +1927,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 8, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), 42, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), 35, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 8_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), 42_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), 35_hsize_t, total_error) ! Reset offset for selection offset(1:2) = 0 @@ -1958,10 +1951,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 3, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), 50, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), 50, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 3_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 3_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), 50_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), 50_hsize_t, total_error) ! Set bad offset for selection offset(1:2) = (/5,-5/) @@ -1970,7 +1963,7 @@ SUBROUTINE test_select_bounds(total_error) ! Get bounds for hyperslab selection with negative offset CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) - CALL VERIFY("h5sget_select_bounds_f", error, -1, total_error) + CALL verify("h5sget_select_bounds_f", error, -1, total_error) ! Set valid offset for selection offset(1:2) = (/5,-2/) @@ -1981,10 +1974,10 @@ SUBROUTINE test_select_bounds(total_error) CALL h5sget_select_bounds_f(sid, low_bounds, high_bounds, error) CALL check("h5sget_select_bounds_f", error, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(1)), 8, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(low_bounds(2)), 1, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(1)), 55, total_error) - CALL VERIFY("h5sget_select_bounds_f", INT(high_bounds(2)), 48, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(1), 8_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", low_bounds(2), 1_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(1), 55_hsize_t, total_error) + CALL verify("h5sget_select_bounds_f", high_bounds(2), 48_hsize_t, total_error) ! Reset offset for selection offset(1:2) = 0 diff --git a/fortran/test/tH5T.f90 b/fortran/test/tH5T.f90 index 7822c16..efbceea 100644 --- a/fortran/test/tH5T.f90 +++ b/fortran/test/tH5T.f90 @@ -29,6 +29,10 @@ MODULE TH5T + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + CONTAINS SUBROUTINE compoundtest(cleanup, total_error) @@ -47,8 +51,6 @@ CONTAINS ! h5tget_class_f, h5tget_member_name_f, h5tget_member_offset_f, h5tget_member_type_f, ! h5tequal_f, h5tinsert_array_f, h5tcommit_f, h5tencode_f, h5tdecode_f - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -155,7 +157,6 @@ CONTAINS CALL h5tclose_f(fixed_str2,error) CALL check("h5tclose_f", error, total_error) - data_dims(1) = dimsize ! ! Initialize data buffer. @@ -178,47 +179,47 @@ CONTAINS ! during write/read to/from dataset with compound datatype. ! CALL h5pcreate_f(H5P_DATASET_XFER_F, plist_id, error) - CALL check("h5pcreate_f", error, total_error) + CALL check("h5pcreate_f", error, total_error) CALL h5pset_preserve_f(plist_id, flag, error) - CALL check("h5pset_preserve_f", error, total_error) + CALL check("h5pset_preserve_f", error, total_error) ! ! Create a new file using default properties. ! - CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) + CALL h5_fixname_f(filename, fix_filename, H5P_DEFAULT_F, error) if (error .ne. 0) then write(*,*) "Cannot modify filename" stop endif CALL h5fcreate_f(fix_filename, H5F_ACC_TRUNC_F, file_id, error) - CALL check("h5fcreate_f", error, total_error) + CALL check("h5fcreate_f", error, total_error) ! ! Create the dataspace. ! CALL h5screate_simple_f(rank, dims, dspace_id, error) - CALL check("h5screate_simple_f", error, total_error) + CALL check("h5screate_simple_f", error, total_error) ! ! Create compound datatype. ! ! First calculate total size by calculating sizes of each member ! CALL h5tcopy_f(H5T_NATIVE_CHARACTER, dt5_id, error) - CALL check("h5tcopy_f", error, total_error) + CALL check("h5tcopy_f", error, total_error) sizechar = 2 CALL h5tset_size_f(dt5_id, sizechar, error) - CALL check("h5tset_size_f", error, total_error) + CALL check("h5tset_size_f", error, total_error) CALL h5tget_size_f(dt5_id, type_sizec, error) - CALL check("h5tget_size_f", error, total_error) + CALL check("h5tget_size_f", error, total_error) CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, error) - CALL check("h5tget_size_f", error, total_error) + CALL check("h5tget_size_f", error, total_error) CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, error) - CALL check("h5tget_size_f", error, total_error) + CALL check("h5tget_size_f", error, total_error) CALL h5tget_size_f(H5T_NATIVE_REAL, type_sizer, error) - CALL check("h5tget_size_f", error, total_error) + CALL check("h5tget_size_f", error, total_error) !write(*,*) "get sizes", type_sizec, type_sizei, type_sizer, type_sized type_size = type_sizec + type_sizei + type_sized + type_sizer CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dtype_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) ! ! Insert memebers ! @@ -226,19 +227,19 @@ CONTAINS ! offset = 0 CALL h5tinsert_f(dtype_id, "char_field", offset, dt5_id, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! INTEGER member ! offset = offset + type_sizec ! Offset of the second memeber is 2 CALL h5tinsert_f(dtype_id, "integer_field", offset, H5T_NATIVE_INTEGER, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! DOUBLE PRECISION member ! offset = offset + type_sizei ! Offset of the third memeber is 6 CALL h5tinsert_f(dtype_id, "double_field", offset, H5T_NATIVE_DOUBLE, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! REAL member ! @@ -250,123 +251,122 @@ CONTAINS ! CALL h5dcreate_f(file_id, dsetname, dtype_id, dspace_id, & dset_id, error) - CALL check("h5dcreate_f", error, total_error) + CALL check("h5dcreate_f", error, total_error) ! ! Create memory types. We have to create a compound datatype ! for each member we want to write. ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sizec, dt1_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt1_id, "char_field", offset, dt5_id, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sizei, dt2_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt2_id, "integer_field", offset, H5T_NATIVE_INTEGER, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sized, dt3_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt3_id, "double_field", offset, H5T_NATIVE_DOUBLE, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sizer, dt4_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt4_id, "real_field", offset, H5T_NATIVE_REAL, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! Write data by fields in the datatype. Fields order is not important. ! CALL h5dwrite_f(dset_id, dt4_id, real_member, data_dims, error, xfer_prp = plist_id) - CALL check("h5dwrite_f", error, total_error) + CALL check("h5dwrite_f", error, total_error) CALL h5dwrite_f(dset_id, dt1_id, char_member, data_dims, error, xfer_prp = plist_id) - CALL check("h5dwrite_f", error, total_error) + CALL check("h5dwrite_f", error, total_error) CALL h5dwrite_f(dset_id, dt3_id, double_member, data_dims, error, xfer_prp = plist_id) - CALL check("h5dwrite_f", error, total_error) + CALL check("h5dwrite_f", error, total_error) CALL h5dwrite_f(dset_id, dt2_id, int_member, data_dims, error, xfer_prp = plist_id) - CALL check("h5dwrite_f", error, total_error) + CALL check("h5dwrite_f", error, total_error) ! ! End access to the dataset and release resources used by it. ! CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f", error, total_error) + CALL check("h5dclose_f", error, total_error) ! ! Terminate access to the data space. ! CALL h5sclose_f(dspace_id, error) - CALL check("h5sclose_f", error, total_error) + CALL check("h5sclose_f", error, total_error) ! ! Terminate access to the datatype ! CALL h5tclose_f(dtype_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt1_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt2_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt3_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt4_id, error) - CALL check("h5tclose_f", error, total_error) - + CALL check("h5tclose_f", error, total_error) ! ! Create and store compound datatype with the character and ! array members. ! type_size = type_sizec + elements*type_sizer ! Size of compound datatype CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dtarray_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dtarray_id, "char_field", offset, H5T_NATIVE_CHARACTER, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) offset = type_sizec CALL h5tarray_create_f(H5T_NATIVE_REAL, array_dims_range, array_dims, arrayt_id, error) - CALL check("h5tarray_create_f", error, total_error) + CALL check("h5tarray_create_f", error, total_error) CALL h5tinsert_f(dtarray_id,"array_field", offset, arrayt_id, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) CALL h5tcommit_f(file_id, "Compound_with_array_member", dtarray_id, error) - CALL check("h5tcommit_f", error, total_error) + CALL check("h5tcommit_f", error, total_error) CALL h5tclose_f(arrayt_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dtarray_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) ! ! Close the file. ! CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f", error, total_error) + CALL check("h5fclose_f", error, total_error) ! ! Open the file. ! CALL h5fopen_f (fix_filename, H5F_ACC_RDWR_F, file_id, error) - CALL check("h5fopen_f", error, total_error) + CALL check("h5fopen_f", error, total_error) ! ! Open the dataset. ! CALL h5dopen_f(file_id, dsetname, dset_id, error) - CALL check("h5dopen_f", error, total_error) + CALL check("h5dopen_f", error, total_error) ! ! Get datatype of the open dataset. ! Check it class, number of members, and member's names. ! CALL h5dget_type_f(dset_id, dtype_id, error) - CALL check("h5dget_type_f", error, total_error) + CALL check("h5dget_type_f", error, total_error) CALL h5tget_class_f(dtype_id, class, error) - CALL check("h5dget_class_f", error, total_error) + CALL check("h5dget_class_f", error, total_error) if (class .ne. H5T_COMPOUND_F) then write(*,*) " Wrong class type returned" total_error = total_error + 1 endif CALL h5tget_nmembers_f(dtype_id, num_members, error) - CALL check("h5dget_nmembers_f", error, total_error) + CALL check("h5dget_nmembers_f", error, total_error) if (num_members .ne. COMP_NUM_MEMBERS ) then write(*,*) " Wrong number of members returned" total_error = total_error + 1 @@ -377,11 +377,11 @@ CONTAINS ! do i = 1, num_members CALL h5tget_member_name_f(dtype_id, i-1, member_name, len, error) - CALL check("h5tget_member_name_f", error, total_error) + CALL check("h5tget_member_name_f", error, total_error) CALL h5tget_member_offset_f(dtype_id, i-1, offset_out, error) - CALL check("h5tget_member_offset_f", error, total_error) + CALL check("h5tget_member_offset_f", error, total_error) CALL h5tget_member_index_f(dtype_id, member_name(1:len), member_index, error) - CALL check("h5tget_member_index_f", error, total_error) + CALL check("h5tget_member_index_f", error, total_error) if(member_index .ne. i-1) then write(*,*) "Index returned is incorrect" write(*,*) member_index, i-1 @@ -394,16 +394,16 @@ CONTAINS write(*,*) "Offset of the char member is incorrect" total_error = total_error + 1 endif - CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) - CALL check("h5tget_member_type_f", error, total_error) - CALL h5tequal_f(membtype_id, dt5_id, flag, error) - CALL check("h5tequal_f", error, total_error) + CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) + CALL check("h5tget_member_type_f", error, total_error) + CALL h5tequal_f(membtype_id, dt5_id, flag, error) + CALL check("h5tequal_f", error, total_error) if(.not. flag) then write(*,*) "Wrong member type returned for character member" total_error = total_error + 1 endif - CALL h5tget_member_class_f(dtype_id, i-1, class, error) - CALL check("h5tget_member_class_f",error, total_error) + CALL h5tget_member_class_f(dtype_id, i-1, class, error) + CALL check("h5tget_member_class_f",error, total_error) if (class .ne. H5T_STRING_F) then write(*,*) "Wrong class returned for character member" total_error = total_error + 1 @@ -413,16 +413,16 @@ CONTAINS write(*,*) "Offset of the integer member is incorrect" total_error = total_error + 1 endif - CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) - CALL check("h5tget_member_type_f", error, total_error) - CALL h5tequal_f(membtype_id, H5T_NATIVE_INTEGER, flag, error) - CALL check("h5tequal_f", error, total_error) + CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) + CALL check("h5tget_member_type_f", error, total_error) + CALL h5tequal_f(membtype_id, H5T_NATIVE_INTEGER, flag, error) + CALL check("h5tequal_f", error, total_error) if(.not. flag) then write(*,*) "Wrong member type returned for integer memebr" total_error = total_error + 1 endif - CALL h5tget_member_class_f(dtype_id, i-1, class, error) - CALL check("h5tget_member_class_f",error, total_error) + CALL h5tget_member_class_f(dtype_id, i-1, class, error) + CALL check("h5tget_member_class_f",error, total_error) if (class .ne. H5T_INTEGER_F) then write(*,*) "Wrong class returned for INTEGER member" total_error = total_error + 1 @@ -432,16 +432,16 @@ CONTAINS write(*,*) "Offset of the double precision member is incorrect" total_error = total_error + 1 endif - CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) - CALL check("h5tget_member_type_f", error, total_error) - CALL h5tequal_f(membtype_id, H5T_NATIVE_DOUBLE, flag, error) - CALL check("h5tequal_f", error, total_error) + CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) + CALL check("h5tget_member_type_f", error, total_error) + CALL h5tequal_f(membtype_id, H5T_NATIVE_DOUBLE, flag, error) + CALL check("h5tequal_f", error, total_error) if(.not. flag) then write(*,*) "Wrong member type returned for double precision memebr" total_error = total_error + 1 endif - CALL h5tget_member_class_f(dtype_id, i-1, class, error) - CALL check("h5tget_member_class_f",error, total_error) + CALL h5tget_member_class_f(dtype_id, i-1, class, error) + CALL check("h5tget_member_class_f",error, total_error) if (class .ne. H5T_FLOAT_F) then write(*,*) "Wrong class returned for double precision member" total_error = total_error + 1 @@ -451,16 +451,16 @@ CONTAINS write(*,*) "Offset of the real member is incorrect" total_error = total_error + 1 endif - CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) - CALL check("h5tget_member_type_f", error, total_error) - CALL h5tequal_f(membtype_id, H5T_NATIVE_REAL, flag, error) - CALL check("h5tequal_f", error, total_error) + CALL h5tget_member_type_f(dtype_id, i-1, membtype_id, error) + CALL check("h5tget_member_type_f", error, total_error) + CALL h5tequal_f(membtype_id, H5T_NATIVE_REAL, flag, error) + CALL check("h5tequal_f", error, total_error) if(.not. flag) then write(*,*) "Wrong member type returned for real memebr" total_error = total_error + 1 endif - CALL h5tget_member_class_f(dtype_id, i-1, class, error) - CALL check("h5tget_member_class_f",error, total_error) + CALL h5tget_member_class_f(dtype_id, i-1, class, error) + CALL check("h5tget_member_class_f",error, total_error) if (class .ne. H5T_FLOAT_F) then write(*,*) "Wrong class returned for real member" total_error = total_error + 1 @@ -476,22 +476,22 @@ CONTAINS ! Create memory datatype to read character member of the compound datatype. ! CALL h5tcopy_f(H5T_NATIVE_CHARACTER, dt2_id, error) - CALL check("h5tcopy_f", error, total_error) + CALL check("h5tcopy_f", error, total_error) sizechar = 2 CALL h5tset_size_f(dt2_id, sizechar, error) - CALL check("h5tset_size_f", error, total_error) + CALL check("h5tset_size_f", error, total_error) CALL h5tget_size_f(dt2_id, type_size, error) - CALL check("h5tget_size_f", error, total_error) + CALL check("h5tget_size_f", error, total_error) CALL h5tcreate_f(H5T_COMPOUND_F, type_size, dt1_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt1_id, "char_field", offset, dt2_id, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! Read part of the dataset ! CALL h5dread_f(dset_id, dt1_id, char_member_out, data_dims, error) - CALL check("h5dread_f", error, total_error) + CALL check("h5dread_f", error, total_error) do i = 1, dimsize if (char_member_out(i) .ne. char_member(i)) then write(*,*) " Wrong character data is read back " @@ -500,15 +500,15 @@ CONTAINS enddo ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sizei, dt5_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt5_id, "integer_field", offset, H5T_NATIVE_INTEGER, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! Read part of the dataset ! CALL h5dread_f(dset_id, dt5_id, int_member_out, data_dims, error) - CALL check("h5dread_f", error, total_error) + CALL check("h5dread_f", error, total_error) do i = 1, dimsize if (int_member_out(i) .ne. int_member(i)) then write(*,*) " Wrong integer data is read back " @@ -518,39 +518,33 @@ CONTAINS ! ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sized, dt3_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt3_id, "double_field", offset, H5T_NATIVE_DOUBLE, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! Read part of the dataset ! CALL h5dread_f(dset_id, dt3_id, double_member_out, data_dims, error) - CALL check("h5dread_f", error, total_error) - do i = 1, dimsize - IF( .NOT.dreal_eq( REAL(double_member_out(i),dp), REAL( double_member(i), dp)) ) THEN - write(*,*) " Wrong double precision data is read back " - total_error = total_error + 1 - endif - enddo + CALL check("h5dread_f", error, total_error) + DO i = 1, dimsize + CALL VERIFY("h5dread_f:Wrong double precision data is read back", double_member_out(i), double_member(i), total_error) + ENDDO ! ! CALL h5tcreate_f(H5T_COMPOUND_F, type_sizer, dt4_id, error) - CALL check("h5tcreate_f", error, total_error) + CALL check("h5tcreate_f", error, total_error) offset = 0 CALL h5tinsert_f(dt4_id, "real_field", offset, H5T_NATIVE_REAL, error) - CALL check("h5tinsert_f", error, total_error) + CALL check("h5tinsert_f", error, total_error) ! ! Read part of the dataset ! CALL h5dread_f(dset_id, dt4_id, real_member_out, data_dims, error) - CALL check("h5dread_f", error, total_error) - DO i = 1, dimsize - IF( .NOT.dreal_eq( REAL(real_member_out(i),dp), REAL( real_member(i), dp)) ) THEN - WRITE(*,*) " Wrong real precision data is read back " - total_error = total_error + 1 - ENDIF - ENDDO + CALL check("h5dread_f", error, total_error) + DO i = 1, dimsize + CALL VERIFY("h5dread_f:Wrong double precision data is read back", real_member_out(i), real_member(i), total_error) + ENDDO ! ! *----------------------------------------------------------------------- ! * Test encoding and decoding compound datatypes @@ -565,7 +559,7 @@ CONTAINS ! Try decoding bogus buffer CALL H5Tdecode_f(cmpd_buf, decoded_tid1, error) - CALL VERIFY("H5Tdecode_f", error, -1, total_error) + CALL verify("H5Tdecode_f", error, -1, total_error) CALL H5Tencode_f(dtype_id, cmpd_buf, cmpd_buf_size, error) CALL check("H5Tencode_f", error, total_error) @@ -578,27 +572,27 @@ CONTAINS CALL H5Tequal_f(decoded_tid1, dtype_id, flag, error) CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) ! ! Close all open objects. ! CALL h5dclose_f(dset_id, error) - CALL check("h5dclose_f", error, total_error) + CALL check("h5dclose_f", error, total_error) CALL h5tclose_f(dt1_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt2_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt3_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt4_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5tclose_f(dt5_id, error) - CALL check("h5tclose_f", error, total_error) + CALL check("h5tclose_f", error, total_error) CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f", error, total_error) + CALL check("h5fclose_f", error, total_error) - if(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) - CALL check("h5_cleanup_f", error, total_error) + IF(cleanup) CALL h5_cleanup_f(filename, H5P_DEFAULT_F, error) + CALL check("h5_cleanup_f", error, total_error) RETURN END SUBROUTINE compoundtest @@ -614,9 +608,6 @@ CONTAINS ! H5tset_norm_f, H5tget_inpad_f, H5tset_inpad_f, H5tget_cset_f, ! H5tset_cset_f, H5tget_strpad_f, H5tset_strpad_f - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - IMPLICIT NONE INTEGER, INTENT(OUT) :: total_error @@ -902,7 +893,7 @@ CONTAINS CALL check("H5Tget_order_f",error, total_error) CALL H5Tget_order_f(H5T_NATIVE_INTEGER, order2, error) CALL check("H5Tget_order_f",error, total_error) - CALL VERIFY("H5Tget_native_type_f",order1, order2, total_error) + CALL verify("H5Tget_native_type_f",order1, order2, total_error) ! this test depends on whether -i8 was specified @@ -910,11 +901,11 @@ CONTAINS !!$ CALL check("H5Tget_size_f",error, total_error) !!$ CALL H5Tget_size_f(H5T_STD_I32BE, type_size2, error) !!$ CALL check("H5Tget_size_f",error, total_error) -!!$ CALL VERIFY("H5Tget_native_type_f", INT(type_size1), INT(type_size2), total_error) +!!$ CALL verify("H5Tget_native_type_f", INT(type_size1), INT(type_size2), total_error) CALL H5Tget_class_f(native_type, class, error) CALL check("H5Tget_class_f",error, total_error) - CALL VERIFY("H5Tget_native_type_f", INT(class), INT(H5T_ENUM_F), total_error) + CALL verify("H5Tget_native_type_f", INT(class), INT(H5T_ENUM_F), total_error) CALL h5dclose_f(dset_id,error) CALL check("h5dclose_f", error, total_error) @@ -972,8 +963,6 @@ CONTAINS SUBROUTINE test_derived_flt(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -1060,24 +1049,24 @@ SUBROUTINE test_derived_flt(cleanup, total_error) CALL check("H5Tget_fields_f", error, total_error) IF(spos.NE.44 .OR. epos.NE.34 .OR. esize.NE.10 .OR. mpos.NE.3 .OR. msize.NE.31)THEN - CALL VERIFY("H5Tget_fields_f", -1, 0, total_error) + CALL verify("H5Tget_fields_f", -1, 0, total_error) ENDIF CALL H5Tget_precision_f(tid1, precision1, error) CALL check("H5Tget_precision_f", error, total_error) - CALL VERIFY("H5Tget_precision_f", INT(precision1), 42, total_error) + CALL verify("H5Tget_precision_f", INT(precision1), 42, total_error) CALL H5Tget_offset_f(tid1, offset1, error) CALL check("H5Tget_offset_f", error, total_error) - CALL VERIFY("H5Tget_offset_f", INT(offset1), 3, total_error) + CALL verify("H5Tget_offset_f", INT(offset1), 3, total_error) CALL H5Tget_size_f(tid1, size1, error) CALL check("H5Tget_size_f", error, total_error) - CALL VERIFY("H5Tget_size_f", INT(size1), 7, total_error) + CALL verify("H5Tget_size_f", INT(size1), 7, total_error) CALL H5Tget_ebias_f(tid1, ebias1, error) CALL check("H5Tget_ebias_f", error, total_error) - CALL VERIFY("H5Tget_ebias_f", INT(ebias1), 511, total_error) + CALL verify("H5Tget_ebias_f", INT(ebias1), 511, total_error) !-------------------------------------------------------------------------- ! * 2nd floating-point type @@ -1121,24 +1110,24 @@ SUBROUTINE test_derived_flt(cleanup, total_error) CALL check("H5Tget_fields_f", error, total_error) IF(spos.NE.23 .OR. epos.NE.16 .OR. esize.NE.7 .OR. mpos.NE.0 .OR. msize.NE.16)THEN - CALL VERIFY("H5Tget_fields_f", -1, 0, total_error) + CALL verify("H5Tget_fields_f", -1, 0, total_error) ENDIF CALL H5Tget_precision_f(tid2, precision2, error) CALL check("H5Tget_precision_f", error, total_error) - CALL VERIFY("H5Tget_precision_f", INT(precision2), 24, total_error) + CALL verify("H5Tget_precision_f", INT(precision2), 24, total_error) CALL H5Tget_offset_f(tid2, offset2, error) CALL check("H5Tget_offset_f", error, total_error) - CALL VERIFY("H5Tget_offset_f", INT(offset2), 0, total_error) + CALL verify("H5Tget_offset_f", INT(offset2), 0, total_error) CALL H5Tget_size_f(tid2, size2, error) CALL check("H5Tget_size_f", error, total_error) - CALL VERIFY("H5Tget_size_f", INT(size2), 3, total_error) + CALL verify("H5Tget_size_f", INT(size2), 3, total_error) CALL H5Tget_ebias_f(tid2, ebias2, error) CALL check("H5Tget_ebias_f", error, total_error) - CALL VERIFY("H5Tget_ebias_f", INT(ebias2), 63, total_error) + CALL verify("H5Tget_ebias_f", INT(ebias2), 63, total_error) CALL h5tclose_f(tid1, error) CALL check("h5tclose_f", error, total_error) diff --git a/fortran/test/tH5T_F03.F90 b/fortran/test/tH5T_F03.F90 new file mode 100644 index 0000000..d50b76d --- /dev/null +++ b/fortran/test/tH5T_F03.F90 @@ -0,0 +1,3425 @@ +!****h* root/fortran/test/tH5T_F03.f90 +! +! NAME +! tH5T_F03.f90 +! +! FUNCTION +! Test FORTRAN HDF5 H5T APIs which are dependent on FORTRAN 2003 +! features. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! CONTAINS SUBROUTINES +! test_array_compound_atomic, test_array_compound_array, +! test_array_bkg, test_h5kind_to_type +! +!***** + +! ***************************************** +! *** H 5 T T E S T S +! ***************************************** + +!*************************************************************** +!** +!** test_array_compound_atomic(): Test basic array datatype code. +!** Tests 1-D array of compound datatypes (with no array fields) +!** +!*************************************************************** +! +#include + +MODULE TH5T_F03 + + USE HDF5 + USE TH5_MISC + USE TH5_MISC_GEN + USE ISO_C_BINDING + +CONTAINS + +SUBROUTINE test_array_compound_atomic(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + ! 1-D dataset WITH fixed dimensions + INTEGER, PARAMETER :: SPACE1_RANK = 1 + INTEGER, PARAMETER :: SPACE1_DIM1 = 4 + ! 1-D array datatype + INTEGER, PARAMETER :: ARRAY1_RANK= 1 + INTEGER, PARAMETER :: ARRAY1_DIM1= 4 + CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray1.h5" + + TYPE s1_t + INTEGER :: i + REAL :: f + END TYPE s1_t + TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: wdata ! Information to write + TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Information read in + INTEGER(hid_t) :: fid1 ! HDF5 File IDs + INTEGER(hid_t) :: dataset ! Dataset ID + INTEGER(hid_t) :: sid1 ! Dataspace ID + INTEGER(hid_t) :: tid1 ! Array Datatype ID + INTEGER(hid_t) :: tid2 ! Compound Datatype ID + + INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) + INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) + INTEGER :: ndims ! Array rank for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading + INTEGER :: nmemb ! Number of compound members + CHARACTER(LEN=20) :: mname ! Name of compound field + INTEGER(size_t) :: off ! Offset of compound field + INTEGER(hid_t) :: mtid ! Datatype ID for field + INTEGER :: i,j ! counting variables + + INTEGER :: error ! Generic RETURN value + INTEGER :: namelen + LOGICAL :: flag + + TYPE(C_PTR) :: f_ptr ! Needed to pass the pointer, for g95 compiler to work + + ALLOCATE( wdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) + ALLOCATE( rdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) + + ! Initialize array data to write + DO i = 1, SPACE1_DIM1 + DO j = 1, ARRAY1_DIM1 + wdata(i,j)%i = i * 10 + j + wdata(i,j)%f = i * 2.5 + j + ENDDO + ENDDO + + ! Create file + CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) + CALL check("h5fcreate_f", error, total_error) + + ! Create dataspace for datasets + CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) + CALL check("h5screate_simple_f", error, total_error) + + CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) + CALL check("h5tcreate_f", error, total_error) + + ! Insert integer field + CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) + CALL check("h5tinsert_f", error, total_error) + + ! Insert float field + + CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), H5T_NATIVE_REAL, error) + CALL check("h5tinsert_f", error, total_error) + + ! Create an array datatype to refer to + CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) + CALL check("h5tarray_create_f", error, total_error) + + ! Close compound datatype + CALL h5tclose_f(tid2,error) + CALL check("h5tclose_f", error, total_error) + + + ! Create a dataset + CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) + CALL check("h5dcreate_f", error, total_error) + + ! Write dataset to disk + + ALLOCATE(rdims(1:2)) ! dummy not needed + + f_ptr = C_LOC(wdata(1,1)) + CALL h5dwrite_f(dataset, tid1, f_ptr, error ) + CALL check("h5dwrite_f", error, total_error) + ! Close Dataset + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + ! Close datatype + CALL h5tclose_f(tid1,error) + CALL check("h5tclose_f", error, total_error) + + ! Close disk dataspace + CALL h5sclose_f(sid1,error) + CALL check("h5sclose_f", error, total_error) + + ! Close file + CALL h5fclose_f(fid1,error) + CALL check("h5fclose_f", error, total_error) + + ! Re-open file + CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) + CALL check("h5fopen_f", error, total_error) + + ! Open the dataset + CALL h5dopen_f(fid1, "Dataset1", dataset, error) + CALL check("h5dopen_f", error, total_error) + + ! Get the datatype + CALL h5dget_type_f(dataset, tid1, error) + CALL check("h5dget_type_f", error, total_error) + + ! Check the array rank + CALL h5tget_array_ndims_f(tid1, ndims, error) + CALL check("h5tget_array_ndims_f", error, total_error) + CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) + + ! Get the array dimensions + ALLOCATE(rdims1(1:ndims)) + CALL h5tget_array_dims_f(tid1, rdims1, error) + CALL check("h5tget_array_dims_f", error, total_error) + + + ! Check the array dimensions + DO i = 1, ndims + CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) + ENDDO + + ! Get the compound datatype + CALL h5tget_super_f(tid1, tid2, error) + CALL check("h5tget_super_f", error, total_error) + + ! Check the number of members + CALL h5tget_nmembers_f(tid2, nmemb, error) + CALL check("h5tget_nmembers_f", error, total_error) + CALL VERIFY("h5tget_nmembers_f", nmemb, 2, total_error) + + ! Check the 1st field's name + CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) + CALL check("H5Tget_member_name_f", error, total_error) + CALL verify("H5Tget_member_name_f",mname(1:namelen),"i", total_error) + + ! Check the 1st field's offset + CALL H5Tget_member_offset_f(tid2, 0, off, error) + CALL check("H5Tget_member_offset_f", error, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) + + + ! Check the 1st field's datatype + CALL H5Tget_member_type_f(tid2, 0, mtid, error) + CALL check("H5Tget_member_type_f", error, total_error) + + CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) + CALL check("H5Tequal_f", error, total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) + + CALL h5tclose_f(mtid,error) + CALL check("h5tclose_f", error, total_error) + + ! Check the 2nd field's name + CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) + CALL check("H5Tget_member_name_f", error, total_error) + CALL verify("H5Tget_member_name_f",mname(1:namelen),"f", total_error) + + ! Check the 2nd field's offset + CALL H5Tget_member_offset_f(tid2, 1, off, error) + CALL check("H5Tget_member_offset_f", error, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) + + ! Check the 2nd field's datatype + CALL H5Tget_member_type_f(tid2, 1, mtid, error) + CALL check("H5Tget_member_type_f", error, total_error) + + CALL H5Tequal_f(mtid, H5T_NATIVE_REAL, flag, error) + CALL check("H5Tequal_f", error, total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) + + CALL h5tclose_f(mtid,error) + CALL check("h5tclose_f", error, total_error) + + ! Close Compound Datatype + CALL h5tclose_f(tid2, error) + CALL check("h5tclose_f", error, total_error) + + ! Read dataset from disk + + f_ptr = C_LOC(rdata(1,1)) + CALL H5Dread_f(dataset, tid1, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + ! Compare data read in + DO i = 1, SPACE1_DIM1 + DO j = 1, ARRAY1_DIM1 + IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN + PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' + total_error = total_error + 1 + ENDIF + CALL VERIFY('ERROR: Wrong real data is read back by H5Dread_f ',wdata(i,j)%f, rdata(i,j)%f, total_error) + ENDDO + ENDDO + + ! Close Datatype + CALL h5tclose_f(tid1,error) + CALL check("h5tclose_f", error, total_error) + + ! Close Dataset + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + ! Close file + CALL h5fclose_f(fid1,error) + CALL check("h5fclose_f", error, total_error) + +END SUBROUTINE test_array_compound_atomic +!!$ +!!$!*************************************************************** +!!$!** +!!$!** test_array_compound_array(): Test basic array datatype code. +!!$!** Tests 1-D array of compound datatypes (with array fields) +!!$!** +!!$!*************************************************************** +!!$ + SUBROUTINE test_array_compound_array(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + ! 1-D array datatype + INTEGER, PARAMETER :: ARRAY1_RANK= 1 + INTEGER, PARAMETER :: ARRAY1_DIM1= 3 + INTEGER, PARAMETER :: ARRAY2_DIM1= 5 + + INTEGER, PARAMETER :: SPACE1_RANK = 1 + INTEGER, PARAMETER :: SPACE1_DIM1 = 4 + CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray2.h5" + + TYPE st_t_struct ! Typedef for compound datatype + INTEGER :: i + REAL, DIMENSION(1:ARRAY2_DIM1) :: f + CHARACTER(LEN=2), DIMENSION(1:ARRAY2_DIM1) :: c + END TYPE st_t_struct + ! Information to write + TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: wdata + ! Information read in + TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: rdata + + + INTEGER(hid_t) :: fid1 ! HDF5 File IDs + INTEGER(hid_t) :: dataset ! Dataset ID + integer(hid_t) :: sid1 ! Dataspace ID + integer(hid_t) :: tid1 ! Array Datatype ID + integer(hid_t) :: tid2 ! Compound Datatype ID + integer(hid_t) :: tid3 ! Nested Array Datatype ID + integer(hid_t) :: tid4 ! Nested Array Datatype ID + + INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) + INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) + INTEGER(HSIZE_T), DIMENSION(1) :: tdims2=(/ARRAY2_DIM1/) + + INTEGER ndims ! Array rank for reading + + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + + INTEGER :: nmemb ! Number of compound members + CHARACTER(LEN=20) :: mname ! Name of compound field + INTEGER(size_t) :: off ! Offset of compound field + INTEGER(hid_t) :: mtid ! Datatype ID for field + INTEGER(hid_t) :: mtid2 ! Datatype ID for field + + INTEGER :: mclass ! Datatype class for field + INTEGER :: i,j,k ! counting variables + + INTEGER :: error + CHARACTER(LEN=2) :: ichr2 + INTEGER :: namelen + LOGICAL :: flag + INTEGER(HID_T) :: atype_id !String Attribute Datatype identifier + INTEGER(SIZE_T) :: attrlen ! Length of the attribute string + + TYPE(c_ptr) :: f_ptr + + ! Initialize array data to write + DO i = 1, SPACE1_DIM1 + DO j = 1, array1_DIM1 + wdata(i,j)%i = i*10+j + DO k = 1, ARRAY2_DIM1 + wdata(i,j)%f(k) = 10*i+j+.5 + WRITE(ichr2,'(I2.2)') k + wdata(i,j)%c(k) = ichr2 + ENDDO + ENDDO + ENDDO + + ! Create file + CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) + CALL check("h5fcreate_f", error, total_error) + + + ! Create dataspace for datasets + CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) + CALL check("h5screate_simple_f", error, total_error) + + ! Create a compound datatype to refer to + ! + CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) + CALL check("h5tcreate_f", error, total_error) + + ! Insert integer field + CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) + CALL check("h5tinsert_f", error, total_error) + + ! Create an array of floats datatype + CALL h5tarray_create_f(H5T_NATIVE_REAL, ARRAY1_RANK, tdims2, tid3, error) + CALL check("h5tarray_create_f", error, total_error) + ! Insert float array field + + CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), tid3, error) + CALL check("h5tinsert_f", error, total_error) + + ! + ! Create datatype for the String attribute. + ! + CALL h5tcopy_f(H5T_NATIVE_CHARACTER, atype_id, error) + CALL check("h5tcopy_f",error,total_error) + + attrlen = LEN(wdata(1,1)%c(1)) + CALL h5tset_size_f(atype_id, attrlen, error) + CALL check("h5tset_size_f",error,total_error) + + ! Create an array of character datatype + CALL h5tarray_create_f(atype_id, ARRAY1_RANK, tdims2, tid4, error) + CALL check("h5tarray_create_f", error, total_error) + + ! Insert character array field + CALL h5tinsert_f(tid2, "c", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1))), tid4, error) + CALL check("h5tinsert2_f", error, total_error) + + ! Close array of floats field datatype + CALL h5tclose_f(tid3,error) + CALL check("h5tclose_f", error, total_error) + + CALL h5tclose_f(tid4,error) + CALL check("h5tclose_f", error, total_error) + + ! Create an array datatype to refer to + CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) + CALL check("h5tarray_create_f", error, total_error) + + ! Close compound datatype + CALL h5tclose_f(tid2,error) + CALL check("h5tclose_f", error, total_error) + + ! Create a dataset + CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) + CALL check("h5dcreate_f", error, total_error) + + + ! Write dataset to disk + f_ptr = C_LOC(wdata(1,1)) + CALL h5dwrite_f(dataset, tid1, f_ptr, error ) + CALL check("h5dwrite_f", error, total_error) + + ! Close Dataset + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + ! Close datatype + CALL h5tclose_f(tid1,error) + CALL check("h5tclose_f", error, total_error) + + ! Close disk dataspace + CALL h5sclose_f(sid1,error) + CALL check("h5sclose_f", error, total_error) + + ! Close file + CALL h5fclose_f(fid1,error) + CALL check("h5fclose_f", error, total_error) + + ! Re-open file + CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) + CALL check("h5fopen_f", error, total_error) + + ! Open the dataset + + CALL h5dopen_f(fid1, "Dataset1", dataset, error) + CALL check("h5dopen_f", error, total_error) + + ! Get the datatype + CALL h5dget_type_f(dataset, tid1, error) + CALL check("h5dget_type_f", error, total_error) + + ! Check the array rank + CALL h5tget_array_ndims_f(tid1, ndims, error) + CALL check("h5tget_array_ndims_f", error, total_error) + CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) + + + ! Get the array dimensions + ALLOCATE(rdims1(1:ndims)) + CALL h5tget_array_dims_f(tid1, rdims1, error) + CALL check("h5tget_array_dims_f", error, total_error) + + ! Check the array dimensions + DO i = 1, ndims + CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) + ENDDO + + ! Get the compound datatype + CALL h5tget_super_f(tid1, tid2, error) + CALL check("h5tget_super_f", error, total_error) + + ! Check the number of members + CALL h5tget_nmembers_f(tid2, nmemb, error) + CALL check("h5tget_nmembers_f", error, total_error) + CALL VERIFY("h5tget_nmembers_f", nmemb, 3, total_error) + + ! Check the 1st field's name + CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) + CALL check("H5Tget_member_name_f", error, total_error) + CALL verify("H5Tget_member_name_f",mname(1:namelen),"i", total_error) + + ! Check the 1st field's offset + + CALL H5Tget_member_offset_f(tid2, 0, off, error) + CALL check("H5Tget_member_offset_f", error, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) + + ! Check the 1st field's datatype + CALL H5Tget_member_type_f(tid2, 0, mtid, error) + CALL check("H5Tget_member_type_f", error, total_error) + + CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) + CALL check("H5Tequal_f", error, total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) + + CALL h5tclose_f(mtid,error) + CALL check("h5tclose_f", error, total_error) + + ! Check the 2nd field's name + CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) + CALL check("H5Tget_member_name_f", error, total_error) + CALL verify("H5Tget_member_name_f",mname(1:namelen),"f", total_error) + + ! Check the 2nd field's offset + CALL H5Tget_member_offset_f(tid2, 1, off, error) + CALL check("H5Tget_member_offset_f", error, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) + + ! Check the 2nd field's datatype + CALL H5Tget_member_type_f(tid2, 1, mtid, error) + CALL check("H5Tget_member_type_f", error, total_error) + + ! Get the 2nd field's class + CALL H5Tget_class_f(mtid, mclass, error) + CALL check("H5Tget_class_f", error, total_error) + CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) + + ! Check the array rank + CALL h5tget_array_ndims_f(mtid, ndims, error) + CALL check("h5tget_array_ndims_f", error, total_error) + CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) + + ! Get the array dimensions + CALL h5tget_array_dims_f(mtid, rdims1, error) + CALL check("h5tget_array_dims_f", error, total_error) + + ! Check the array dimensions + DO i = 1, ndims + CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) + ENDDO + + ! Check the 3rd field's name + CALL H5Tget_member_name_f(tid2, 2, mname, namelen,error) + CALL check("H5Tget_member_name_f", error, total_error) + CALL verify("H5Tget_member_name_f",mname(1:namelen),"c", total_error) + + ! Check the 3rd field's offset + CALL H5Tget_member_offset_f(tid2, 2, off, error) + CALL check("H5Tget_member_offset_f", error, total_error) + CALL VERIFY("H5Tget_member_offset_f",INT(off),& + INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1)))), total_error) + + ! Check the 3rd field's datatype + CALL H5Tget_member_type_f(tid2, 2, mtid2, error) + CALL check("H5Tget_member_type_f", error, total_error) + + ! Get the 3rd field's class + CALL H5Tget_class_f(mtid2, mclass, error) + CALL check("H5Tget_class_f", error, total_error) + CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) + + ! Check the array rank + CALL h5tget_array_ndims_f(mtid2, ndims, error) + CALL check("h5tget_array_ndims_f", error, total_error) + CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) + + ! Get the array dimensions + CALL h5tget_array_dims_f(mtid2, rdims1, error) + CALL check("h5tget_array_dims_f", error, total_error) + + ! Check the array dimensions + DO i = 1, ndims + CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) + ENDDO + + ! Check the nested array's datatype + CALL H5Tget_super_f(mtid, tid3, error) + CALL check("H5Tget_super_f", error, total_error) + + CALL H5Tequal_f(tid3, H5T_NATIVE_REAL, flag, error) + CALL check("H5Tequal_f", error, total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) + + ! Check the nested array's datatype + CALL H5Tget_super_f(mtid2, tid3, error) + CALL check("H5Tget_super_f", error, total_error) + + CALL H5Tequal_f(tid3, atype_id, flag, error) + CALL check("H5Tequal_f", error, total_error) + CALL verify("H5Tequal_f", flag, .TRUE., total_error) + + ! Close the array's base type datatype + CALL h5tclose_f(tid3, error) + CALL check("h5tclose_f", error, total_error) + + ! Close the member datatype + CALL h5tclose_f(mtid,error) + CALL check("h5tclose_f", error, total_error) + + ! Close the member datatype + CALL h5tclose_f(mtid2,error) + CALL check("h5tclose_f", error, total_error) + + ! Close Compound Datatype + CALL h5tclose_f(tid2,error) + CALL check("h5tclose_f", error, total_error) + + ! READ dataset from disk + + f_ptr = c_null_ptr + f_ptr = C_LOC(rdata(1,1)) + CALL H5Dread_f(dataset, tid1, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + ! Compare data read in + DO i = 1, SPACE1_DIM1 + DO j = 1, ARRAY1_DIM1 + IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN + PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' + total_error = total_error + 1 + ENDIF + DO k = 1, ARRAY2_DIM1 + + IF(wdata(i,j)%f(k).NE.rdata(i,j)%f(k))THEN + PRINT*, 'ERROR: Wrong real array data is read back by H5Dread_f ' + total_error = total_error + 1 + ENDIF + IF(wdata(i,j)%c(k).NE.rdata(i,j)%c(k))THEN + PRINT*, 'ERROR: Wrong character array data is read back by H5Dread_f ' + total_error = total_error + 1 + ENDIF + ENDDO + ENDDO + ENDDO + + ! Close Datatype + CALL h5tclose_f(tid1,error) + CALL check("h5tclose_f", error, total_error) + + ! Close Dataset + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + ! Close file + CALL h5fclose_f(fid1,error) + CALL check("h5fclose_f", error, total_error) + END SUBROUTINE test_array_compound_array +!!$ +!!$!*************************************************************** +!!$!** +!!$!** test_array_bkg(): Test basic array datatype code. +!!$!** Tests reading compound datatype with array fields and +!!$!** writing partial fields. +!!$!** +!!$!*************************************************************** +!!$ + SUBROUTINE test_array_bkg(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + INTEGER, PARAMETER :: LENGTH = 5 + INTEGER, PARAMETER :: ALEN = 10 + INTEGER, PARAMETER :: RANK = 1 + INTEGER, PARAMETER :: NMAX = 100 + CHARACTER(LEN=17), PARAMETER :: FIELDNAME = "ArrayofStructures" + + INTEGER(hid_t) :: fid, array_dt + INTEGER(hid_t) :: space + INTEGER(hid_t) :: type + INTEGER(hid_t) :: dataset + + INTEGER(hsize_t), DIMENSION(1:1) :: dim =(/LENGTH/) + INTEGER(hsize_t), DIMENSION(1:1) :: dima =(/ALEN/) + + INTEGER :: i, j + INTEGER, DIMENSION(1:3) :: ndims = (/1,1,1/) + + TYPE CmpField_struct + INTEGER, DIMENSION(1:ALEN) :: a + REAL(KIND=sp), DIMENSION(1:ALEN) :: b + REAL(KIND=dp), DIMENSION(1:ALEN) :: c + ENDTYPE CmpField_struct + + TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cf + TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cfr + + TYPE CmpDTSinfo_struct + INTEGER :: nsubfields + CHARACTER(LEN=5), DIMENSION(1:nmax) :: name + INTEGER(size_t), DIMENSION(1:nmax) :: offset + INTEGER(hid_t), DIMENSION(1:nmax) :: datatype + END TYPE CmpDTSinfo_struct + + TYPE(CmpDTSinfo_struct) :: dtsinfo + + TYPE fld_t_struct + REAL(KIND=sp), DIMENSION(1:ALEN) :: b + END TYPE fld_t_struct + + INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype + INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype + INTEGER(SIZE_T) :: type_sized ! Size of the double datatype + INTEGER(SIZE_T) :: sizeof_compound ! total size of compound + + TYPE(fld_t_struct), DIMENSION(1:LENGTH), TARGET :: fld + TYPE(fld_t_struct), DIMENSION(1:LENGTH), TARGET :: fldr + + CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray3.h5" + + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading + INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading + + INTEGER :: error + TYPE(c_ptr) :: f_ptr + +! Initialize the data +! ------------------- + + DO i = 1, LENGTH + DO j = 1, ALEN + cf(i)%a(j) = 100*(i+1) + j + cf(i)%b(j) = (100.*(i+1) + 0.01*j) + cf(i)%c(j) = 100.*(i+1) + 0.02*j + ENDDO + ENDDO + + ! Set the number of data members + ! ------------------------------ + + dtsinfo%nsubfields = 3 + + ! Initialize the offsets + ! ----------------------- + CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, error) + CALL check("h5tget_size_f", error, total_error) + IF(h5_sizeof(cf(1)%b(1)).EQ.4_size_t)THEN + CALL h5tget_size_f(H5T_NATIVE_REAL_C_FLOAT, type_sizer, error) + CALL check("h5tget_size_f", error, total_error) + ELSE IF(h5_sizeof(cf(1)%b(1)).EQ.8_size_t)THEN + CALL h5tget_size_f(H5T_NATIVE_REAL_C_DOUBLE, type_sizer, error) + CALL check("h5tget_size_f", error, total_error) + ENDIF + + CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, error) + CALL check("h5tget_size_f", error, total_error) + + dtsinfo%offset(1) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%a(1))) + dtsinfo%offset(2) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%b(1))) + dtsinfo%offset(3) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%c(1))) + + + ! Initialize the data type IDs + ! ---------------------------- + dtsinfo%datatype(1) = H5T_NATIVE_INTEGER; + dtsinfo%datatype(2) = H5T_NATIVE_REAL_C_FLOAT; + dtsinfo%datatype(3) = H5T_NATIVE_REAL_C_DOUBLE; + + + ! Initialize the names of data members + ! ------------------------------------ + + dtsinfo%name(1) = "One " + dtsinfo%name(2) = "Two " + dtsinfo%name(3) = "Three" + + ! Create file + ! ----------- + CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid,error) + CALL check("h5fcreate_f", error, total_error) + + + ! Create data space + ! ----------------- + CALL h5screate_simple_f(RANK, dim, space, error) + CALL check("h5screate_simple_f", error, total_error) + + + ! Create the memory data type + ! --------------------------- + + CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(cf(1)), C_LOC(cf(2))), type, error) + CALL check("h5tcreate_f", error, total_error) + + ! Add members to the compound data type + ! -------------------------------------- + + DO i = 1, dtsinfo%nsubfields + CALL h5tarray_create_f(dtsinfo%datatype(i), ndims(i), dima, array_dt, error) + CALL check("h5tarray_create_f", error, total_error) + CALL H5Tinsert_f(type, dtsinfo%name(i), dtsinfo%offset(i), array_dt, error) + CALL check("h5tinsert_f", error, total_error) + + CALL h5tclose_f(array_dt,error) + CALL check("h5tclose_f", error, total_error) + ENDDO + + ! Create the dataset + ! ------------------ / + CALL h5dcreate_f(fid,FIELDNAME,type, space, dataset,error) + CALL check("h5dcreate_f", error, total_error) + + ! Write data to the dataset + ! ------------------------- + + ALLOCATE(rdims(1:2)) ! dummy not needed + + f_ptr = C_LOC(cf(1)) + + CALL h5dwrite_f(dataset, type, f_ptr, error ) + CALL check("h5dwrite_f", error, total_error) + + + ALLOCATE(rdims1(1:2)) ! dummy not needed + f_ptr = C_LOC(cfr(1)) + CALL H5Dread_f(dataset, type, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + ! Verify correct data + ! ------------------- + DO i = 1, LENGTH + DO j = 1, ALEN + IF( cf(i)%a(j) .NE. cfr(i)%a(j) )THEN + PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' + total_error = total_error + 1 + ENDIF + CALL VERIFY('ERROR: Wrong real data is read back by H5Dread_f ',cf(i)%b(j), cfr(i)%b(j), total_error) + CALL VERIFY('ERROR: Wrong double data is read back by H5Dread_f ',cf(i)%c(j), cfr(i)%c(j), total_error) + ENDDO + ENDDO + + + ! Release IDs + ! ----------- + CALL h5tclose_f(type,error) + CALL check("h5tclose_f", error, total_error) + CALL h5sclose_f(space,error) + CALL check("h5sclose_f", error, total_error) + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + CALL h5fclose_f(fid,error) + CALL check("h5fclose_f", error, total_error) + + !**************************** + ! Reopen the file and update + !**************************** + + CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) + CALL check("h5fopen_f", error, total_error) + + CALL h5dopen_f(fid, FIELDNAME, dataset, error) + CALL check("h5dopen_f", error, total_error) + + sizeof_compound = INT( type_sizer*ALEN, size_t) + + CALL h5tcreate_f(H5T_COMPOUND_F, sizeof_compound , type, error) + CALL check("h5tcreate_f", error, total_error) + + CALL h5tarray_create_f(H5T_NATIVE_REAL_C_FLOAT, 1, dima, array_dt, error) + CALL check("h5tarray_create_f", error, total_error) + + CALL h5tinsert_f(TYPE, "Two", 0_size_t, array_dt, error) + CALL check("h5tinsert_f", error, total_error) + + ! Initialize the data to overwrite + ! -------------------------------- + DO i = 1, LENGTH + DO j = 1, ALEN + fld(i)%b(j) = 1.313 + cf(i)%b(j) = fld(i)%b(j) + ENDDO + ENDDO + + f_ptr = C_LOC(fld(1)) + + CALL h5dwrite_f(dataset, TYPE, f_ptr, error ) + CALL check("h5dwrite_f", error, total_error) + + + ! Read just the field changed + + f_ptr = C_LOC(fldr(1)) + CALL H5Dread_f(dataset, TYPE, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + DO i = 1, LENGTH + DO j = 1, ALEN + CALL VERIFY('ERROR: Wrong real data is read back by H5Dread_f ',fld(i)%b(j), fldr(i)%b(j), total_error) + ENDDO + ENDDO + CALL h5tclose_f(TYPE,error) + CALL check("h5tclose_f", error, total_error) + CALL h5tclose_f(array_dt,error) + CALL check("h5tclose_f", error, total_error) + + CALL h5dget_type_f(dataset, type, error) + CALL check("h5dget_type_f", error, total_error) + + + ! Read the entire dataset again + + f_ptr = C_LOC(cfr(1)) + CALL H5Dread_f(dataset, TYPE, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + + ! Verify correct data + ! ------------------- + + DO i = 1, LENGTH + DO j = 1, ALEN + CALL VERIFY('ERROR: Wrong integer data is read back by H5Dread_f ',cf(i)%a(j), cfr(i)%a(j), total_error) + CALL VERIFY('ERROR: Wrong real data is read back by H5Dread_f ',cf(i)%b(j),cfr(i)%b(j), total_error) + CALL VERIFY('ERROR: Wrong double data is read back by H5Dread_f ',cf(i)%c(j), cfr(i)%c(j), total_error) + ENDDO + ENDDO + + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + CALL h5tclose_f(type,error) + CALL check("h5tclose_f", error, total_error) + + CALL h5fclose_f(fid,error) + CALL check("h5fclose_f", error, total_error) + +!************************************************** +! Reopen the file and print out all the data again +!************************************************** + + CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) + CALL check("h5fopen_f", error, total_error) + + + CALL h5dopen_f(fid, FIELDNAME, dataset, error) + CALL check("h5dopen_f", error, total_error) + + + CALL h5dget_type_f(dataset, type, error) + CALL check("h5dget_type_f", error, total_error) + + + ! Reset the data to read in + ! ------------------------- + + DO i = 1, LENGTH + cfr(i)%a(:) = 0 + cfr(i)%b(:) = 0 + cfr(i)%c(:) = 0 + ENDDO + + f_ptr = C_LOC(cfr(1)) + CALL H5Dread_f(dataset, TYPE, f_ptr, error) + CALL check("H5Dread_f", error, total_error) + + ! Verify correct data + ! ------------------- + + DO i = 1, LENGTH + DO j = 1, ALEN + CALL VERIFY('ERROR: Wrong integer data is read back by H5Dread_f ',cf(i)%a(j), cfr(i)%a(j), total_error) + CALL VERIFY('ERROR: Wrong real data is read back by H5Dread_f ',cf(i)%b(j),cfr(i)%b(j), total_error) + CALL VERIFY('ERROR: Wrong double data is read back by H5Dread_f ',cf(i)%c(j), cfr(i)%c(j), total_error) + ENDDO + ENDDO + + CALL h5dclose_f(dataset, error) + CALL check("h5dclose_f", error, total_error) + + CALL h5tclose_f(type,error) + CALL check("h5tclose_f", error, total_error) + + CALL h5fclose_f(fid,error) + CALL check("h5fclose_f", error, total_error) + + END SUBROUTINE test_array_bkg + + SUBROUTINE test_h5kind_to_type(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(2) !should map to INTEGER*1 on most modern processors + INTEGER, PARAMETER :: int_kind_4 = SELECTED_INT_KIND(4) !should map to INTEGER*2 on most modern processors + INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors + INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(18) !should map to INTEGER*8 on most modern processors +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + INTEGER, PARAMETER :: int_kind_32 = SELECTED_INT_KIND(36) !should map to INTEGER*16 on most modern processors + INTEGER(int_kind_32), DIMENSION(1:4), TARGET :: dset_data_i32, data_out_i32 + INTEGER(HID_T) :: dset_id32 ! Dataset identifier + CHARACTER(LEN=6), PARAMETER :: dsetname16 = "dset16" ! Dataset name +#endif + INTEGER, PARAMETER :: real_kind_7 = C_FLOAT !should map to REAL*4 on most modern processors + INTEGER, PARAMETER :: real_kind_15 = C_DOUBLE !should map to REAL*8 on most modern processors + +! Check if C has quad precision extension +#if H5_HAVE_FLOAT128!=0 +! Check if Fortran supports quad precision +# if H5_PAC_FC_MAX_REAL_PRECISION > 26 + INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(31) +# else + INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(15,307) +# endif +#else +! Check if the default of long double is quad precision +# if H5_PAC_C_MAX_REAL_PRECISION > 26 +# if H5_PAC_FC_MAX_REAL_PRECISION > 26 + INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(31) +# else + INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(15,307) +# endif +# else + INTEGER, PARAMETER :: real_kind_31 = SELECTED_REAL_KIND(15,307) +# endif +#endif + REAL(real_kind_31), DIMENSION(1:4), TARGET :: dset_data_r31, data_out_r31 + INTEGER(HID_T) :: dset_idr16 ! Dataset identifier + CHARACTER(LEN=7), PARAMETER :: dsetnamer16 = "dsetr16" ! Dataset name + + CHARACTER(LEN=12), PARAMETER :: filename = "dsetf_F03.h5" ! File name + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname8 = "dset8" ! Dataset name + CHARACTER(LEN=6), PARAMETER :: dsetnamer = "dsetr" ! Dataset name + CHARACTER(LEN=6), PARAMETER :: dsetnamer4 = "dsetr4" ! Dataset name + CHARACTER(LEN=6), PARAMETER :: dsetnamer8 = "dsetr8" ! Dataset name + + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HID_T) :: dset_id1 ! Dataset identifier + INTEGER(HID_T) :: dset_id4 ! Dataset identifier + INTEGER(HID_T) :: dset_id8 ! Dataset identifier + INTEGER(HID_T) :: dset_id16 ! Dataset identifier + INTEGER(HID_T) :: dset_idr ! Dataset identifier + INTEGER(HID_T) :: dset_idr4 ! Dataset identifier + INTEGER(HID_T) :: dset_idr8 ! Dataset identifier + + INTEGER :: error ! Error flag + INTEGER :: i + +! Data buffers: + + INTEGER(int_kind_1), DIMENSION(1:4), TARGET :: dset_data_i1, data_out_i1 + INTEGER(int_kind_4), DIMENSION(1:4), TARGET :: dset_data_i4, data_out_i4 + INTEGER(int_kind_8), DIMENSION(1:4), TARGET :: dset_data_i8, data_out_i8 + INTEGER(int_kind_16), DIMENSION(1:4), TARGET :: dset_data_i16, data_out_i16 + + REAL, DIMENSION(1:4), TARGET :: dset_data_r, data_out_r + REAL(real_kind_7), DIMENSION(1:4), TARGET :: dset_data_r7, data_out_r7 + REAL(real_kind_15), DIMENSION(1:4), TARGET :: dset_data_r15, data_out_r15 + + INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/) + INTEGER(HID_T) :: dspace_id ! Dataspace identifier + + TYPE(C_PTR) :: f_ptr + + ! + ! Initialize the dset_data array. + ! + DO i = 1, 4 + dset_data_i1(i) = HUGE(0_int_kind_1)-i + dset_data_i4(i) = HUGE(0_int_kind_4)-i + dset_data_i8(i) = HUGE(0_int_kind_8)-i + dset_data_i16(i) = HUGE(0_int_kind_16)-i +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + dset_data_i32(i) = HUGE(0_int_kind_32)-i +#endif + dset_data_r(i) = 4.0*ATAN(1.0)-REAL(i-1) + dset_data_r7(i) = 4.0_real_kind_7*ATAN(1.0_real_kind_7)-REAL(i-1,real_kind_7) + dset_data_r15(i) = 4.0_real_kind_15*ATAN(1.0_real_kind_15)-REAL(i-1,real_kind_15) + dset_data_r31(i) = 4.0_real_kind_31*ATAN(1.0_real_kind_31)-REAL(i-1,real_kind_31) + + END DO + + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create dataspaces for datasets + ! + CALL h5screate_simple_f(1, data_dims , dspace_id, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset. + ! + CALL H5Dcreate_f(file_id, dsetname1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), dspace_id, dset_id1, error) + CALL check("H5Dcreate_f",error, total_error) + CALL H5Dcreate_f(file_id, dsetname2, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), dspace_id, dset_id4, error) + CALL check("H5Dcreate_f",error, total_error) + CALL H5Dcreate_f(file_id, dsetname4, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), dspace_id, dset_id8, error) + CALL check("H5Dcreate_f",error, total_error) + CALL H5Dcreate_f(file_id, dsetname8, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), dspace_id, dset_id16, error) + CALL check("H5Dcreate_f",error, total_error) +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + CALL H5Dcreate_f(file_id, dsetname16, h5kind_to_type(int_kind_32,H5_INTEGER_KIND), dspace_id, dset_id32, error) + CALL check("H5Dcreate_f",error, total_error) +#endif + CALL H5Dcreate_f(file_id, dsetnamer, H5T_NATIVE_REAL, dspace_id, dset_idr, error) + CALL check("H5Dcreate_f",error, total_error) + CALL H5Dcreate_f(file_id, dsetnamer4, h5kind_to_type(real_kind_7,H5_REAL_KIND), dspace_id, dset_idr4, error) + CALL check("H5Dcreate_f",error, total_error) + CALL H5Dcreate_f(file_id, dsetnamer8, h5kind_to_type(real_kind_15,H5_REAL_KIND), dspace_id, dset_idr8, error) + CALL check("H5Dcreate_f",error, total_error) +!#ifdef H5_HAVE_FLOAT128 + CALL H5Dcreate_f(file_id, dsetnamer16, h5kind_to_type(real_kind_31,H5_REAL_KIND), dspace_id, dset_idr16, error) + CALL check("H5Dcreate_f",error, total_error) +!#endif + ! + ! Write the dataset. + ! + f_ptr = C_LOC(dset_data_i1(1)) + CALL h5dwrite_f(dset_id1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + f_ptr = C_LOC(dset_data_i4(1)) + CALL h5dwrite_f(dset_id4, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + f_ptr = C_LOC(dset_data_i8(1)) + CALL h5dwrite_f(dset_id8, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + f_ptr = C_LOC(dset_data_i16(1)) + CALL h5dwrite_f(dset_id16, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + f_ptr = C_LOC(dset_data_i32(1)) + CALL h5dwrite_f(dset_id32, h5kind_to_type(int_kind_32,H5_INTEGER_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) +#endif + f_ptr = C_LOC(dset_data_r(1)) + CALL h5dwrite_f(dset_idr, H5T_NATIVE_REAL, f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + f_ptr = C_LOC(dset_data_r7(1)) + CALL h5dwrite_f(dset_idr4, h5kind_to_type(real_kind_7,H5_REAL_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + f_ptr = C_LOC(dset_data_r15(1)) + CALL h5dwrite_f(dset_idr8, h5kind_to_type(real_kind_15,H5_REAL_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) +!#ifdef H5_HAVE_FLOAT128 + f_ptr = C_LOC(dset_data_r31(1)) + CALL h5dwrite_f(dset_idr16, h5kind_to_type(real_kind_31,H5_REAL_KIND), f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) +!#endif + ! + ! Close the file + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f",error, total_error) + + ! Open the file + + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error) + CALL check("h5fopen_f",error, total_error) + ! + ! Read the dataset. + ! + ! Read data back into an integer size that is larger then the original size used for + ! writing the data + f_ptr = C_LOC(data_out_i1) + CALL h5dread_f(dset_id1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_i4) + CALL h5dread_f(dset_id4, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_i8) + CALL h5dread_f(dset_id8, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_i16) + CALL h5dread_f(dset_id16, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + f_ptr = C_LOC(data_out_i32) + CALL h5dread_f(dset_id32, h5kind_to_type(int_kind_32,H5_INTEGER_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) +#endif + f_ptr = C_LOC(data_out_r) + CALL h5dread_f(dset_idr, H5T_NATIVE_REAL, f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_r7) + CALL h5dread_f(dset_idr4, h5kind_to_type(real_kind_7,H5_REAL_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_r15) + CALL h5dread_f(dset_idr8, h5kind_to_type(real_kind_15,H5_REAL_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + f_ptr = C_LOC(data_out_r31) + CALL h5dread_f(dset_idr16, h5kind_to_type(real_kind_31,H5_REAL_KIND), f_ptr, error) + CALL check("h5dread_f",error, total_error) + DO i = 1, 4 + + CALL verify("h5kind_to_type",dset_data_i1(i),data_out_i1(i),total_error) + CALL verify("h5kind_to_type",dset_data_i4(i),data_out_i4(i),total_error) + CALL verify("h5kind_to_type",dset_data_i8(i),data_out_i8(i),total_error) + CALL verify("h5kind_to_type",dset_data_i16(i),data_out_i16(i),total_error) + +#if H5_HAVE_Fortran_INTEGER_SIZEOF_16!=0 + CALL verify("h5kind_to_type",dset_data_i32(i),data_out_i32(i),total_error) +#endif + CALL verify("h5kind_to_type",dset_data_r(i),data_out_r(i),total_error) + CALL verify("h5kind_to_type",dset_data_r7(i),data_out_r7(i),total_error) + CALL verify("h5kind_to_type",dset_data_r15(i),data_out_r15(i),total_error) + CALL verify("h5kind_to_type",dset_data_r31(i),data_out_r31(i),total_error) + END DO + + ! + ! Close the dataset. + ! + CALL h5dclose_f(dset_id1, error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset_id4, error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset_id8, error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset_id16, error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset_idr4, error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset_idr8, error) + CALL check("h5dclose_f",error, total_error) + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE test_h5kind_to_type + +!************************************************************ +! +! This test reads and writes array datatypes +! to a dataset. The test first writes integers arrays of +! dimension ADIM0xADIM1 to a dataset with a dataspace of +! DIM0, then closes the file. Next, it reopens the file, +! reads back the data. +! +!************************************************************ +SUBROUTINE t_array(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=19), PARAMETER :: filename = "t_array_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 4 + INTEGER , PARAMETER :: adim0 = 3 + INTEGER , PARAMETER :: adim1 = 5 + INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: adims = (/adim0, adim1/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + INTEGER, DIMENSION(1:dim0, 1:adim0, 1:adim1), TARGET :: wdata ! Write buffer + INTEGER, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer + INTEGER :: i, j, k + TYPE(C_PTR) :: f_ptr + INTEGER :: error ! Error flag + + ! + ! Initialize data. i is the element in the dataspace, j and k the + ! elements within the array datatype. + ! + DO i = 1, dim0 + DO j = 1, adim0 + DO k = 1, adim1 + wdata(i,j,k) = (i-1)*(j-1)-(j-1)*(k-1)+(i-1)*(k-1) + ENDDO + ENDDO + ENDDO + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, error) + ! + ! Create array datatypes for file and memory. + ! + CALL H5Tarray_create_f(INT(H5T_STD_I64LE, HID_T), 2, adims, filetype, error) + CALL check("H5Tarray_create_f",error, total_error) + CALL H5Tarray_create_f(H5T_NATIVE_INTEGER, 2, adims, memtype, error) + CALL check("H5Tarray_create_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the array data to it. + ! + CALL h5dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata) + CALL h5dwrite_f(dset, memtype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! Open file, dataset, and attribute. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get the datatype and its dimensions. + ! + CALL h5dget_type_f(dset, filetype, error) + CALL check("h5dget_type_f",error, error) + CALL H5Tget_array_dims_f(filetype, adims, error) + CALL check("h5dget_type_f",error, total_error) + CALL VERIFY("H5Tget_array_dims_f", adims(1), INT(adim0,hsize_t), total_error) + CALL VERIFY("H5Tget_array_dims_f", adims(2), INT(adim1,hsize_t), total_error) + ! + ! Get dataspace and allocate memory for read buffer. This is a + ! three dimensional attribute when the array datatype is included. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + + ALLOCATE(rdata(1:dims(1),1:adims(1),1:adims(2))) + ! + ! Create the memory datatype. + ! + CALL H5Tarray_create_f(H5T_NATIVE_INTEGER, 2, adims, memtype, error) + CALL check("H5Tarray_create_f",error, total_error) + ! + ! Read the data. + ! + + f_ptr = C_LOC(rdata) + CALL H5Dread_f(dset, memtype, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + ! + ! Output the data to the screen. + ! + i_loop: DO i = 1, INT(dims(1)) + DO j=1, INT(adim0) + DO k = 1, INT(adim1) + CALL VERIFY("H5Sget_simple_extent_dims_f", rdata(i,j,k), wdata(i,j,k), total_error) + IF(total_error.NE.0) EXIT i_loop + ENDDO + ENDDO + ENDDO i_loop + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_array + +SUBROUTINE t_enum(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=19), PARAMETER :: filename = "t_enum_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 4 + INTEGER , PARAMETER :: dim1 = 7 + INTEGER(HID_T) :: F_BASET ! File base type + INTEGER(HID_T) :: M_BASET ! Memory base type + INTEGER(SIZE_T) , PARAMETER :: NAME_BUF_SIZE = 16 + +! Enumerated type + INTEGER, PARAMETER :: SOLID=0, LIQUID=1, GAS=2, PLASMA=3 + + INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles + + INTEGER(hsize_t), DIMENSION(1:2) :: dims = (/dim0, dim1/) + INTEGER, DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer + INTEGER, DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer + INTEGER, DIMENSION(1:1), TARGET :: val + + CHARACTER(LEN=6), DIMENSION(1:4) :: & + names = (/"SOLID ", "LIQUID", "GAS ", "PLASMA"/) + CHARACTER(LEN=NAME_BUF_SIZE) :: name + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + INTEGER :: i, j, idx + TYPE(C_PTR) :: f_ptr + INTEGER :: error ! Error flag + ! + ! Initialize DATA. + ! + F_BASET = H5T_STD_I16BE ! File base type + M_BASET = H5T_NATIVE_INTEGER ! Memory base type + DO i = 1, dim0 + DO j = 1, dim1 + wdata(i,j) = MOD( (j-1)*(i-1), PLASMA+1) + ENDDO + ENDDO + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create the enumerated datatypes for file and memory. This + ! process is simplified IF native types are used for the file, + ! as only one type must be defined. + ! + CALL h5tenum_create_f(F_BASET, filetype, error) + CALL check("h5tenum_create_f",error, total_error) + + CALL h5tenum_create_f(M_BASET, memtype, error) + CALL check("h5tenum_create_f",error, total_error) + + DO i = SOLID, PLASMA + ! + ! Insert enumerated value for memtype. + ! + val(1) = i + f_ptr = C_LOC(val(1)) + CALL H5Tenum_insert_f(memtype, TRIM(names(i+1)), f_ptr, error) + CALL check("H5Tenum_insert_f", error, total_error) + ! + ! Insert enumerated value for filetype. We must first convert + ! the numerical value val to the base type of the destination. + ! + f_ptr = C_LOC(val(1)) + CALL H5Tconvert_f(M_BASET, F_BASET, INT(1,SIZE_T), f_ptr, error) + CALL check("H5Tconvert_f",error, total_error) + IF(i.GE.1)THEN ! test both F90 and F03 APIs + CALL H5Tenum_insert_f(filetype, TRIM(names(i+1)), f_ptr, error) + ELSE + CALL H5Tenum_insert_f(filetype, TRIM(names(i+1)), val(1), error) + ENDIF + CALL check("H5Tenum_insert_f",error, total_error) + ENDDO + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(2, dims, space, total_error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the enumerated data to it. + ! + CALL h5dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata(1,1)) + CALL h5dwrite_f(dset, memtype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL h5tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + + ! + ! Now we begin the read section of this example. + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f (file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL h5dget_space_f(dset,space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(2), INT(dim1,hsize_t), total_error) + + ALLOCATE(rdata(1:dims(1),1:dims(2))) + + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1,1)) + CALL h5dread_f(dset, memtype, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + + ! + ! Output the data to the screen. + ! + i_loop: DO i = 1, INT(dims(1)) + DO j = 1, INT(dims(2)) + ! + ! Get the name of the enumeration member. + ! + CALL h5tenum_nameof_f( memtype, rdata(i,j), NAME_BUF_SIZE, name, error) + CALL check("h5tenum_nameof_f",error, total_error) + idx = MOD( (j-1)*(i-1), PLASMA+1 ) + 1 + CALL verify("h5tenum_nameof_f",TRIM(name),TRIM(names(idx)), total_error) + IF(total_error.NE.0) EXIT i_loop + ENDDO + ENDDO i_loop + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL h5tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_enum + +SUBROUTINE t_bit(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=20), PARAMETER :: filename = "t_bit_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 4 + INTEGER , PARAMETER :: dim1 = 7 + + INTEGER(HID_T) :: file, space, dset ! Handles + INTEGER(HSIZE_T), DIMENSION(1:2) :: dims = (/dim0, dim1/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + INTEGER(C_SIGNED_CHAR), DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer + INTEGER(C_SIGNED_CHAR), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer + INTEGER :: A, B, C, D + INTEGER :: Aw, Bw, Cw, Dw + INTEGER :: i, j + INTEGER, PARAMETER :: hex = Z'00000003' + TYPE(C_PTR) :: f_ptr + INTEGER :: error ! Error flag + ! + ! Initialize data. We will manually pack 4 2-bit integers into + ! each unsigned char data element. + ! + DO i = 0, dim0-1 + DO j = 0, dim1-1 + wdata(i+1,j+1) = 0 + wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(IAND(i * j - j, hex),C_SIGNED_CHAR) ) ! Field "A" + wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(i,hex),2),C_SIGNED_CHAR) ) ! Field "B" + wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(j,hex),4),C_SIGNED_CHAR) ) ! Field "C" + wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(i+j,hex),6),C_SIGNED_CHAR) ) ! Field "D" + ENDDO + ENDDO + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(2, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the bitfield data to it. + ! + CALL H5Dcreate_f(file, dataset, H5T_STD_B8BE, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata(1,1)) + CALL H5Dwrite_f(dset, H5T_NATIVE_B8, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! Open file, dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(2), INT(dim1,hsize_t), total_error) + ALLOCATE(rdata(1:dims(1),1:dims(2))) + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata) + CALL H5Dread_f(dset, H5T_NATIVE_B8, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + ! + ! Output the data to the screen. + ! + i_loop: DO i = 1, INT(dims(1)) + DO j = 1, INT(dims(2)) + A = IAND(rdata(i,j), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "A" + B = IAND(ISHFT(rdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "B" + C = IAND(ISHFT(rdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "C" + D = IAND(ISHFT(rdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "D" + + Aw = IAND(wdata(i,j), INT(hex,C_SIGNED_CHAR)) + Bw = IAND(ISHFT(wdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) + Cw = IAND(ISHFT(wdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) + Dw = IAND(ISHFT(wdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) + + CALL VERIFY("bitfield", A, Aw, total_error) + CALL VERIFY("bitfield", B, Bw, total_error) + CALL VERIFY("bitfield", C, Cw, total_error) + CALL VERIFY("bitfield", D, Dw, total_error) + IF(total_error.NE.0) EXIT i_loop + ENDDO + ENDDO i_loop + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_bit + +SUBROUTINE t_opaque(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + CHARACTER(LEN=20), PARAMETER :: filename = "t_opaque_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 4 + INTEGER(SIZE_T) , PARAMETER :: size = 7 + INTEGER(HID_T) :: file, space, dtype, dset ! Handles + INTEGER(size_t) :: len + INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/DIM0/) + + CHARACTER(LEN=size), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer + CHARACTER(LEN=size), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer + CHARACTER(LEN=size-1) :: str = "OPAQUE" + + CHARACTER(LEN=14) :: tag_sm ! Test reading obaque tag into + CHARACTER(LEN=15) :: tag_exact ! buffers that are: to small, exact + CHARACTER(LEN=17) :: tag_big ! and to big. + + INTEGER :: taglen + INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims + INTEGER(hsize_t) :: i + CHARACTER(LEN=1) :: ichr + TYPE(C_PTR) :: f_ptr + INTEGER :: error + ! + ! Initialize data. + ! + DO i = 1, dim0 + WRITE(ichr,'(I1)') i-1 + wdata(i) = str//ichr + ENDDO + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create opaque datatype and set the tag to something appropriate. + ! For this example we will write and view the data as a character + ! array. + ! + CALL h5tcreate_f(h5T_OPAQUE_F, size, dtype, error) + CALL check("h5tcreate_f",error, total_error) + CALL h5tset_tag_f(dtype,"Character array",error) + CALL check("h5tset_tag_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the opaque data to it. + ! + CALL h5dcreate_f(file, dataset, dtype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata(1)(1:1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(dtype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get datatype and properties for the datatype. + ! + CALL h5dget_type_f(dset, dtype, error) + CALL check("h5dget_type_f",error, total_error) + CALL h5tget_size_f(dtype, len, error) + CALL check("h5tget_size_f",error, total_error) + + ! Next tests should return + ! opaque_tag = tag = "Character array" and the actual length = 15 + + ! Test reading into a string that is to small + CALL h5tget_tag_f(dtype, tag_sm, taglen, error) + CALL check("h5tget_tag_f",error, total_error) + CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) + CALL verify("h5tget_tag_f",tag_sm,"Character arra", total_error) + + ! Test reading into a string that is exact + CALL h5tget_tag_f(dtype, tag_exact, taglen, error) + CALL check("h5tget_tag_f",error, total_error) + CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) + CALL verify("h5tget_tag_f",tag_exact,"Character array", total_error) + + ! Test reading into a string that is to big + CALL h5tget_tag_f(dtype, tag_big, taglen, error) + CALL check("h5tget_tag_f",error, total_error) + CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) + CALL verify("h5tget_tag_f",tag_big,"Character array ", total_error) + + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL h5dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + ALLOCATE(rdata(1:dims(1))) + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1)(1:1)) + CALL h5dread_f(dset, dtype, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + ! + DO i = 1, dims(1) + CALL verify("t_opaque",TRIM(rdata(i)),TRIM(wdata(i)), total_error) + ENDDO + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(dtype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_opaque + +SUBROUTINE t_objref(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + CHARACTER(LEN=20), PARAMETER :: filename = "t_objref_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 2 + + INTEGER(HID_T) :: file, space, dset, obj ! Handles + INTEGER :: error + + INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/dim0/) + TYPE(hobj_ref_t_f), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer + TYPE(hobj_ref_t_f), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer + INTEGER :: objtype + INTEGER(SIZE_T) :: name_size + CHARACTER(LEN=80) :: name + INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims + INTEGER :: i + TYPE(C_PTR) :: f_ptr + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create a dataset with a null dataspace. + ! + CALL h5screate_f(H5S_NULL_F,space,error) + CALL check("h5screate_f",error, total_error) + CALL h5dcreate_f(file, "DS2", H5T_STD_I32LE, space, obj, error) + CALL check("h5dcreate_f",error, total_error) + ! + CALL h5dclose_f(obj , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + ! + ! Create a group. + ! + CALL h5gcreate_f(file, "G1", obj, error) + CALL check("h5gcreate_f",error, total_error) + CALL h5gclose_f(obj, error) + CALL check("h5gclose_f",error, total_error) + ! + ! Create references to the previously created objects. note, space_id + ! is not needed for object references. + ! + f_ptr = C_LOC(wdata(1)) + CALL H5Rcreate_f(file, "G1", H5R_OBJECT_F, f_ptr, error) + CALL check("H5Rcreate_f",error, total_error) + f_ptr = C_LOC(wdata(2)) + CALL H5Rcreate_f(file, "DS2", H5R_OBJECT_F, f_ptr, error) + CALL check("H5Rcreate_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the object references to it. + ! + CALL h5dcreate_f(file, dataset, H5T_STD_REF_OBJ, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + f_ptr = C_LOC(wdata(1)) + CALL h5dwrite_f(dset, H5T_STD_REF_OBJ, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL h5dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + + ALLOCATE(rdata(1:maxdims(1))) + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1)) + CALL h5dread_f( dset, H5T_STD_REF_OBJ, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + ! + ! Output the data to the screen. + ! + DO i = 1, INT(maxdims(1)) + ! + ! Open the referenced object, get its name and type. + ! + f_ptr = C_LOC(rdata(i)) + CALL H5Rdereference_f(dset, H5R_OBJECT_F, f_ptr, obj, error) + CALL check("H5Rdereference_f",error, total_error) + CALL H5Rget_obj_type_f(dset, H5R_OBJECT_F, f_ptr, objtype, error) + CALL check("H5Rget_obj_type_f",error, total_error) + ! + ! Get the length of the name and name + ! + name(:) = ' ' ! initialize string to blanks + CALL H5Iget_name_f(obj, name, 80_size_t, name_size, error) + CALL check("H5Iget_name_f",error, total_error) + ! + ! Print the object type and close the object. + ! + IF(objtype.EQ.H5G_GROUP_F)THEN + CALL verify("t_objref", name(1:name_size),"/G1", total_error) + ELSE IF(objtype.EQ.H5G_DATASET_F)THEN + CALL verify("t_objref", name(1:name_size),"/DS2", total_error) + ELSE + total_error = total_error + 1 + ENDIF + CALL h5oclose_f(obj, error) + CALL check("h5oclose_f",error, total_error) + + END DO + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_objref + + +SUBROUTINE t_regref(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + CHARACTER(LEN=22), PARAMETER :: filename = "t_regref_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + CHARACTER(LEN=3) , PARAMETER :: dataset2 = "DS2" + INTEGER , PARAMETER :: dim0 = 2 + INTEGER , PARAMETER :: ds2dim0 = 16 + INTEGER , PARAMETER :: ds2dim1 = 3 + + INTEGER(HID_T) :: file, memspace, space, dset, dset2 ! Handles + INTEGER :: error + + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims3 + INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2 = (/ds2dim0,ds2dim1/) + + INTEGER(HSIZE_T), DIMENSION(1:2,1:4) :: coords = RESHAPE((/2,1,12,3,1,2,5,3/),(/2,4/)) + + INTEGER(HSIZE_T), DIMENSION(1:2) :: start=(/0,0/),stride=(/11,2/),count=(/2,2/), BLOCK=(/3,1/) + + INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims + INTEGER(hssize_t) :: npoints + TYPE(hdset_reg_ref_t_f03), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer + TYPE(hdset_reg_ref_t_f03), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer + + INTEGER(size_t) :: size + CHARACTER(LEN=1), DIMENSION(1:ds2dim0,1:ds2dim1), TARGET :: wdata2 + + CHARACTER(LEN=80),DIMENSION(1:1), TARGET :: rdata2 + CHARACTER(LEN=80) :: name + INTEGER(hsize_t) :: i + TYPE(C_PTR) :: f_ptr + CHARACTER(LEN=ds2dim0) :: chrvar + CHARACTER(LEN=20), DIMENSION(1:2) :: chrref_correct + + chrvar = "The quick brown " + READ(chrvar,'(16A1)') wdata2(1:16,1) + chrvar = "fox jumps over " + READ(chrvar,'(16A1)') wdata2(1:16,2) + chrvar = "the 5 lazy dogs " + READ(chrvar,'(16A1)') wdata2(1:16,3) + + chrref_correct(1) = 'hdf5' + chrref_correct(2) = 'Therowthedog' + + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create a dataset with character data. + ! + CALL h5screate_simple_f(2, dims2, space, error) + CALL check("h5screate_simple_f",error, total_error) + CALL h5dcreate_f(file,dataset2, H5T_STD_I8LE, space, dset2, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata2(1,1)) + CALL h5dwrite_f(dset2, H5T_NATIVE_INTEGER_1, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Create reference to a list of elements in dset2. + ! + CALL h5sselect_elements_f(space, H5S_SELECT_SET_F, 2, INT(4,size_t), coords, error) + CALL check("h5sselect_elements_f",error, total_error) + f_ptr = C_LOC(wdata(1)) + CALL h5rcreate_f(file, DATASET2, H5R_DATASET_REGION_F, f_ptr, error, space) + CALL check("h5rcreate_f",error, total_error) + ! + ! Create reference to a hyperslab in dset2, close dataspace. + ! + CALL h5sselect_hyperslab_f (space, H5S_SELECT_SET_F, start, count, error, stride, block) + CALL check("h5sselect_hyperslab_f",error, total_error) + f_ptr = C_LOC(wdata(2)) + CALL h5rcreate_f(file, DATASET2, H5R_DATASET_REGION_F, f_ptr, error, space) + CALL check("h5rcreate_f",error, total_error) + + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to the current size. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + + ! + ! Create the dataset and write the region references to it. + ! + CALL h5dcreate_f(file, dataset, H5T_STD_REF_DSETREG, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + f_ptr = C_LOC(wdata(1)) + CALL h5dwrite_f(dset, H5T_STD_REF_DSETREG, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5dclose_f(dset2, error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL h5dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + ALLOCATE(rdata(1:dims(1))) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1)) + CALL h5dread_f( dset, H5T_STD_REF_DSETREG, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + ! + ! Output the data to the screen. + ! + DO i = 1, dims(1) + + ! + ! Open the referenced object, retrieve its region as a + ! dataspace selection. + ! + f_ptr = C_LOC(rdata(i)) + CALL H5Rdereference_f(dset, H5R_DATASET_REGION_F, f_ptr, dset2, error) + CALL check("H5Rdereference_f",error, total_error) + + CALL H5Rget_region_f(dset, f_ptr, space, error) + CALL check("H5Rget_region_f",error, total_error) + + ! + ! Get the object's name + ! + name(:) = ' ' ! initialize string to blanks + CALL H5Iget_name_f(dset2, name, 80_size_t, size, error) + CALL check("H5Iget_name_f",error, total_error) + CALL VERIFY("H5Iget_name_f", INT(size), LEN_TRIM(name), total_error) + CALL verify("H5Iget_name_f",name(1:size),TRIM(name), total_error) + ! + ! Allocate space for the read buffer. + ! + CALL H5Sget_select_npoints_f(space, npoints, error) + CALL check("H5Sget_select_npoints_f",error, total_error) + CALL VERIFY("H5Sget_select_npoints_f", INT(npoints), LEN_TRIM(chrref_correct(i)), total_error) + + dims3(1) = npoints + ! + ! Read the dataset region. + ! + CALL h5screate_simple_f(1, dims3, memspace, error) + CALL check("h5screate_simple_f",error, total_error) + + f_ptr = C_LOC(rdata2(1)(1:1)) + CALL h5dread_f( dset2, H5T_NATIVE_INTEGER_1, f_ptr, error, memspace, space) + CALL check("H5Dread_f",error, total_error) + CALL verify("h5dread_f",rdata2(1)(1:npoints),TRIM(chrref_correct(i)), total_error) + + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Sclose_f(memspace, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Dclose_f(dset2, error) + CALL check("h5dclose_f",error, total_error) + + END DO + ! + ! Close and release resources. + ! + DEALLOCATE(rdata) + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_regref + +SUBROUTINE t_vlen(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + CHARACTER(LEN=18), PARAMETER :: filename = "t_vlen_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER, PARAMETER :: LEN0 = 3 + INTEGER, PARAMETER :: LEN1 = 12 + INTEGER(hsize_t) :: dim0 + + INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles + INTEGER :: error + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + INTEGER :: i, j + + ! vl data + TYPE vl + INTEGER, DIMENSION(:), POINTER :: DATA + END TYPE vl + TYPE(vl), DIMENSION(:), ALLOCATABLE, TARGET :: ptr + + + TYPE(hvl_t), DIMENSION(1:2), TARGET :: wdata ! Array of vlen structures + TYPE(hvl_t), DIMENSION(1:2), TARGET :: rdata ! Pointer to vlen structures + + INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/2/) + INTEGER, DIMENSION(:), POINTER :: ptr_r + TYPE(C_PTR) :: f_ptr + + ! + ! Initialize variable-length data. wdata(1) is a countdown of + ! length LEN0, wdata(2) is a Fibonacci sequence of length LEN1. + ! + wdata(1)%len = LEN0 + wdata(2)%len = LEN1 + + ALLOCATE( ptr(1:2) ) + ALLOCATE( ptr(1)%data(1:wdata(1)%len) ) + ALLOCATE( ptr(2)%data(1:wdata(2)%len) ) + + DO i=1, wdata(1)%len + ptr(1)%data(i) = wdata(1)%len - i + 1 ! 3 2 1 + ENDDO + wdata(1)%p = C_LOC(ptr(1)%data(1)) + + ptr(2)%data(1:2) = 1 + DO i = 3, wdata(2)%len + ptr(2)%data(i) = ptr(2)%data(i-1) + ptr(2)%data(i-2) ! (1 1 2 3 5 8 etc.) + ENDDO + wdata(2)%p = C_LOC(ptr(2)%data(1)) + + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create variable-length datatype for file and memory. + ! + CALL H5Tvlen_create_f(H5T_STD_I32LE, filetype, error) + CALL check("H5Tvlen_create_f",error, total_error) + CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) + CALL check("H5Tvlen_create_f",error, total_error) + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the variable-length data to it. + ! + CALL H5Dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + f_ptr = C_LOC(wdata(1)) + CALL h5dwrite_f(dset, memtype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + ! + ! Close and release resources. Note the use of H5Dvlen_reclaim + ! removes the need to manually deallocate the previously allocated + ! data. + ! + + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + + ! + ! Now we begin the read section of this example. + + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + + ! + ! Get dataspace and allocate memory for array of vlen structures. + ! This does not actually allocate memory for the vlen data, that + ! will be done by the library. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + dim0 = dims(1) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) + + ! + ! Create the memory datatype. + ! + CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) + CALL check("H5Tvlen_create_f",error, total_error) + + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1)) + CALL H5Dread_f(dset, memtype, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + + DO i = 1, INT(dims(1)) + CALL c_f_pointer(rdata(i)%p, ptr_r, [rdata(i)%len] ) + DO j = 1, rdata(i)%len + CALL VERIFY("t_vlen", ptr_r(j), ptr(i)%data(j), total_error) + ENDDO + ENDDO + ! + ! Close and release resources. + ! + DEALLOCATE(ptr) + CALL h5dvlen_reclaim_f(memtype, space, H5P_DEFAULT_F, f_ptr, error) + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_vlen + + +SUBROUTINE t_vlstring(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=18), PARAMETER :: filename = "t_vlstring.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + + INTEGER(SIZE_T), PARAMETER :: dim0 = 4 + INTEGER(SIZE_T), PARAMETER :: sdim = 7 + INTEGER(HID_T) :: file, filetype, space, dset ! Handles + INTEGER :: error + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + + CHARACTER(LEN=sdim), DIMENSION(1:dim0), TARGET :: & + wdata = (/"Parting", "is such", "sweet ", "sorrow."/) ! Write buffer + CHARACTER(LEN=sdim), DIMENSION(:), ALLOCATABLE :: rdata ! Read buffer + INTEGER(HSIZE_T), DIMENSION(2) :: data_dims = (/sdim,dim0/) + INTEGER(SIZE_T), DIMENSION(4) :: str_len = (/7,7,5,7/) + INTEGER(hsize_t) :: i + + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create file and memory datatypes. For this example we will save + ! the strings as C variable length strings, H5T_STRING is defined + ! as a variable length string. + ! + CALL H5Tcopy_f(H5T_STRING, filetype, error) + CALL check("H5Tcopy_f",error, total_error) + CALL H5Tset_strpad_f(filetype, H5T_STR_NULLPAD_F, error) + CALL check("H5Tset_strpad_f",error, total_error) + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the variable-length string data to + ! it. + ! + CALL h5dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + CALL h5dwrite_vl_f(dset, filetype, wdata, data_dims, str_len, error, space) + CALL check("h5dwrite_vl_f",error, total_error) + + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + + ! + ! Now we begin the read section of this example. + ! + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get the datatype. + ! + CALL H5Dget_type_f(dset, filetype, error) + CALL check("H5Dget_type_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) + + ALLOCATE(rdata(1:dims(1))) + + ! + ! Read the data. + ! + CALL h5dread_vl_f(dset, filetype, rdata, data_dims, str_len, error, space) + CALL check("H5Dread_vl_f",error, total_error) + + ! + ! Output the data to the screen. + ! + DO i = 1, dims(1) + CALL verify("h5dopen_f",TRIM(rdata(i)),TRIM(wdata(i)) , total_error) + END DO + + DEALLOCATE(rdata) + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_vlstring + +SUBROUTINE t_vlstring_readwrite(total_error) + +! test writing and reading vl string using h5dread_f and h5dwrite_f, C_LOC and C_F_POINTER + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=19), PARAMETER :: filename = "t_vlstringrw_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + CHARACTER(LEN=3) , PARAMETER :: dataset2D = "DS2" + + INTEGER(HSIZE_T) , PARAMETER :: dim0 = 4 + INTEGER(HSIZE_T) , PARAMETER :: dim1 = 2 + INTEGER(HID_T) :: file, filetype, space, dset ! Handles + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2D = (/dim1,dim0/) + INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims + + TYPE(C_PTR), DIMENSION(1:dim0), TARGET :: wdata + CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A = "123456"//C_NULL_CHAR + CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: B = "7890"//C_NULL_CHAR + CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: C = "abc"//C_NULL_CHAR + CHARACTER(len=3, KIND=c_char), DIMENSION(1:1), TARGET :: D = "df"//C_NULL_CHAR + + TYPE(C_PTR), DIMENSION(1:dim1,1:dim0), TARGET :: wdata2D + + CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A11 = "A(1,1)"//C_NULL_CHAR + CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: A12 = "A12"//C_NULL_CHAR + CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: A13 = "A_13"//C_NULL_CHAR + CHARACTER(len=8, KIND=c_char), DIMENSION(1:1), TARGET :: A14 = "A_{1,4}"//C_NULL_CHAR + CHARACTER(len=8, KIND=c_char), DIMENSION(1:1), TARGET :: A21 = "A_{2,1}"//C_NULL_CHAR + CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: A22 = "A_22"//C_NULL_CHAR + CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: A23 = "A23"//C_NULL_CHAR + CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A24 = "A(2,4)"//C_NULL_CHAR + + TYPE(C_PTR), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer + TYPE(C_PTR), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata2D ! Read 2D buffer + CHARACTER(len=8, kind=c_char), POINTER :: data ! A pointer to a Fortran string + CHARACTER(len=8, kind=c_char), DIMENSION(1:4) :: data_w ! A pointer to a Fortran string + CHARACTER(len=8, kind=c_char), DIMENSION(1:dim1,1:dim0) :: data2D_w ! A pointer to a Fortran string + TYPE(C_PTR) :: f_ptr + INTEGER(hsize_t) :: i, j + INTEGER :: len + INTEGER :: error + + ! Initialize array of C pointers + + wdata(1) = C_LOC(A(1)(1:1)) + wdata(2) = C_LOC(B(1)(1:1)) + wdata(3) = C_LOC(C(1)(1:1)) + wdata(4) = C_LOC(D(1)(1:1)) + + data_w(1) = A(1) + data_w(2) = B(1) + data_w(3) = C(1) + data_w(4) = D(1) + + wdata2D(1,1) = C_LOC(A11(1)(1:1)) + wdata2D(1,2) = C_LOC(A12(1)(1:1)) + wdata2D(1,3) = C_LOC(A13(1)(1:1)) + wdata2D(1,4) = C_LOC(A14(1)(1:1)) + wdata2D(2,1) = C_LOC(A21(1)(1:1)) + wdata2D(2,2) = C_LOC(A22(1)(1:1)) + wdata2D(2,3) = C_LOC(A23(1)(1:1)) + wdata2D(2,4) = C_LOC(A24(1)(1:1)) + + data2D_w(1,1) = A11(1) + data2D_w(1,2) = A12(1) + data2D_w(1,3) = A13(1) + data2D_w(1,4) = A14(1) + data2D_w(2,1) = A21(1) + data2D_w(2,2) = A22(1) + data2D_w(2,3) = A23(1) + data2D_w(2,4) = A24(1) + + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create file and memory datatypes. For this test we will save + ! the strings as C variable length strings, H5T_STRING is defined + ! as a variable length string. + ! + CALL H5Tcopy_f(H5T_STRING, filetype, error) + CALL check("H5Tcopy_f",error, total_error) + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the variable-length string data to + ! it. + ! + CALL h5dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + f_ptr = C_LOC(wdata(1)) + CALL h5dwrite_f(dset, filetype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(2, dims2D, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the variable-length string data to + ! it. + ! + CALL h5dcreate_f(file, dataset2D, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + f_ptr = C_LOC(wdata2D(1,1)) + CALL h5dwrite_f(dset, filetype, f_ptr, error) + CALL check("h5dwrite_f",error, total_error) + + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + + ! + ! Now we begin the read section of this test. + ! + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get the datatype. + ! + CALL H5Dget_type_f(dset, filetype, error) + CALL check("H5Dget_type_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + ALLOCATE(rdata(1:dims(1))) + ! + ! Read the data. + ! + + f_ptr = C_LOC(rdata(1)) + CALL h5dread_f(dset, H5T_STRING, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + + ! + ! Check the data. + ! + DO i = 1, dims(1) + CALL C_F_POINTER(rdata(i), data) + len = 0 + DO + IF(DATA(len+1:len+1).EQ.C_NULL_CHAR.OR.len.GE.8) EXIT + len = len + 1 + ENDDO + CALL verify("h5dread_f",data(1:len), data_w(i)(1:len), total_error) + END DO + + DEALLOCATE(rdata) + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + ! + ! Test reading in 2D dataset + ! + CALL h5dopen_f(file, dataset2D, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get the datatype. + ! + CALL H5Dget_type_f(dset, filetype, error) + CALL check("H5Dget_type_f",error, total_error) + ! + ! Get dataspace and allocate memory for read buffer. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + + + CALL H5Sget_simple_extent_dims_f(space, dims2D, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + ALLOCATE(rdata2D(1:dims2D(1),1:dims2D(2))) + + ! + ! Read the data. + ! + + f_ptr = C_LOC(rdata2D(1,1)) + CALL h5dread_f(dset, H5T_STRING, f_ptr, error) + CALL check("H5Dread_f",error, total_error) + + ! + ! Check the data. + ! + DO i = 1, dims2D(1) + DO j = 1, dims2D(2) + CALL C_F_POINTER(rdata2D(i,j), DATA) + len = 0 + DO + IF(DATA(len+1:len+1).EQ.C_NULL_CHAR.OR.len.GE.8) EXIT + len = len + 1 + ENDDO + CALL verify("h5dread_f",DATA(1:len), data2D_w(i,j)(1:len), total_error) + ENDDO + END DO + + DEALLOCATE(rdata2D) + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + +END SUBROUTINE t_vlstring_readwrite + + +SUBROUTINE t_string(total_error) + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + CHARACTER(LEN=20), PARAMETER :: filename = "t_string_F03.h5" + CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" + INTEGER , PARAMETER :: dim0 = 4 + INTEGER(SIZE_T) , PARAMETER :: sdim = 8 + + INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles + INTEGER :: error + + INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) + INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims + + CHARACTER(LEN=sdim), DIMENSION(1:dim0), TARGET :: & + wdata = (/"Parting", "is such", "sweet ", "sorrow."/) + CHARACTER(LEN=sdim), DIMENSION(:), ALLOCATABLE, TARGET :: rdata + INTEGER(hsize_t) :: i + INTEGER(SIZE_T) :: size + TYPE(C_PTR) :: f_ptr + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + ! + ! Create file datatypes. For this example we will save + ! the strings as FORTRAN strings + ! + CALL H5Tcopy_f(H5T_FORTRAN_S1, filetype, error) + CALL check("H5Tcopy_f",error, total_error) + CALL H5Tset_size_f(filetype, sdim, error) + CALL check("H5Tset_size_f",error, total_error) + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(1, dims, space, error) + CALL check("h5screate_simple_f",error, total_error) + ! + ! Create the dataset and write the string data to it. + ! + CALL h5dcreate_f(file, dataset, filetype, space, dset, error) + CALL check("h5dcreate_f",error, total_error) + + f_ptr = C_LOC(wdata(1)(1:1)) + CALL H5Dwrite_f(dset, filetype, f_ptr, error) + CALL check("H5Dwrite_f",error, total_error) + ! + ! Close and release resources. + ! + CALL h5dclose_f(dset , error) + CALL check("h5dclose_f",error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(filetype, error) + CALL check("h5tclose_f",error, total_error) + CALL h5fclose_f(file , error) + CALL check("h5fclose_f",error, total_error) + ! + ! Now we begin the read section of this example. + ! + ! Open file and dataset. + ! + CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) + CALL check("h5fopen_f",error, total_error) + CALL h5dopen_f(file, dataset, dset, error) + CALL check("h5dopen_f",error, total_error) + ! + ! Get the datatype and its size. + ! + CALL H5Dget_type_f(dset, filetype, error) + CALL check("H5Dget_type_f",error, total_error) + CALL H5Tget_size_f(filetype, size, error) + CALL check("H5Tget_size_f",error, total_error) + CALL VERIFY("H5Tget_size_f", INT(size), INT(sdim), total_error) + ! + ! Get dataspace. + ! + CALL H5Dget_space_f(dset, space, error) + CALL check("H5Dget_space_f",error, total_error) + CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) + CALL check("H5Sget_simple_extent_dims_f",error, total_error) + CALL VERIFY("H5Sget_simple_extent_dims_f", dims(1), INT(dim0,hsize_t), total_error) + + ALLOCATE(rdata(1:dims(1))) + ! + ! Create the memory datatype. + ! + CALL H5Tcopy_f(H5T_FORTRAN_S1, memtype, error) + CALL check("H5Tcopy_f",error, total_error) + CALL H5Tset_size_f(memtype, sdim, error) + CALL check("H5Tset_size_f",error, total_error) + ! + ! Read the data. + ! + f_ptr = C_LOC(rdata(1)(1:1)) + CALL H5Dread_f(dset, memtype, f_ptr, error, space) + CALL check("H5Dread_f",error, total_error) + + DO i = 1, dims(1) + CALL verify("h5dread_f",TRIM(rdata(i)),TRIM(wdata(i)) , total_error) + END DO + + DEALLOCATE(rdata) + + ! + ! Close and release resources. + ! + CALL H5Dclose_f(dset, error) + CALL check("h5dclose_f",error, total_error) + CALL H5Sclose_f(space, error) + CALL check("h5sclose_f",error, total_error) + CALL H5Tclose_f(memtype, error) + CALL check("h5tclose_f",error, total_error) + CALL H5Fclose_f(file, error) + CALL check("h5fclose_f",error, total_error) + + +END SUBROUTINE t_string + +SUBROUTINE vl_test_special_char(total_error) + + IMPLICIT NONE + +! INTERFACE +! SUBROUTINE setup_buffer(data_in, line_lengths, char_type) +! USE HDF5 +! USE ISO_C_BINDING +! IMPLICIT NONE +! CHARACTER(len=*), DIMENSION(:) :: data_in +! INTEGER(size_t), DIMENSION(:) :: line_lengths +! CHARACTER(KIND=C_CHAR,LEN=*) :: char_type +! END SUBROUTINE setup_buffer +! END INTERFACE + + INTEGER, INTENT(OUT) :: total_error + + CHARACTER(LEN=16), PARAMETER :: filename = "t_controlchar.h5" + INTEGER, PARAMETER :: line_length = 10 + INTEGER(hid_t) :: file + INTEGER(hid_t) :: dataset0 + CHARACTER(len=line_length), DIMENSION(1:100) :: data_in + CHARACTER(len=line_length), DIMENSION(1:100) :: data_out + INTEGER(size_t), DIMENSION(1:100) :: line_lengths + INTEGER(hid_t) :: string_id, space, dcpl + INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/0/) + INTEGER(hsize_t), DIMENSION(1:1) :: max_dims = (/0/) + INTEGER(hsize_t), DIMENSION(1:2) :: data_dims = (/0,0/) + INTEGER(hsize_t), DIMENSION(1:1) :: chunk =(/10/) + INTEGER, PARAMETER :: ncontrolchar = 7 + CHARACTER(KIND=C_CHAR,LEN=1), DIMENSION(1:ncontrolchar) :: controlchar = & + (/C_ALERT, C_BACKSPACE,C_CARRIAGE_RETURN, C_FORM_FEED,C_HORIZONTAL_TAB,C_VERTICAL_TAB, C_NEW_LINE/) + INTEGER :: i, j, n, error + n = 8 + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f",error, total_error) + + max_dims = (/H5S_UNLIMITED_F/) + + ! + ! Create the memory datatype. + ! + CALL h5tcopy_f(h5t_string, string_id, error) + CALL check("h5tcopy_f", error, total_error) + CALL h5tset_strpad_f(string_id, h5t_str_nullpad_f, error) + CALL check("h5tset_strpad_f", error, total_error) + dims(1) = n + ! + ! Create dataspace. + ! + CALL h5screate_simple_f(1, dims, space, error, max_dims) + CALL check("h5screate_simple_f", error, total_error) + CALL h5pcreate_f(h5p_dataset_create_f, dcpl, error) + CALL check("h5pcreate_f", error, total_error) + CALL h5pset_chunk_f(dcpl, 1, chunk, error) + CALL check("h5pset_chunk_f", error, total_error) + + data_dims(1) = line_length + data_dims(2) = n + ! + ! Create data with strings containing various control characters. + ! + DO i = 1, ncontrolchar + ! + ! Create the dataset, for the string with control character and write the string data to it. + ! + CALL h5dcreate_f(file, controlchar(i), string_id, space, dataset0, error, dcpl) + CALL check("h5dcreate_f", error, total_error) + CALL setup_buffer(data_in(1:n), line_lengths, controlchar(i)) + CALL h5dwrite_vl_f(dataset0, string_id, data_in(1:n), data_dims, line_lengths(1:n), error, space) + CALL check("h5dwrite_vl_f", error, total_error) + ! + ! Read the string back. + ! + CALL h5dread_vl_f(dataset0, string_id, data_out(1:n), data_dims, line_lengths(1:n), error, space) + CALL check("h5dread_vl_f", error, total_error) + + DO j = 1, n + IF(data_in(j).NE.data_out(j))THEN + total_error = total_error + 1 + EXIT + ENDIF + ENDDO + + CALL h5dclose_f(dataset0, error) + CALL check("h5dclose_f", error, total_error) + ENDDO + + CALL h5pclose_f(dcpl, error) + CALL check("h5pclose_f", error, total_error) + CALL h5sclose_f(space, error) + CALL check("h5sclose_f", error, total_error) + CALL h5fclose_f(file, error) + CALL check("h5fclose_f", error, total_error) + +END SUBROUTINE vl_test_special_char + + +SUBROUTINE setup_buffer(data_in, line_lengths, char_type) + + IMPLICIT NONE + + ! Creates a simple "Data_in" consisting of the letters of the alphabet, + ! one per line, with a control character. + + CHARACTER(len=10), DIMENSION(:) :: data_in + INTEGER(size_t), DIMENSION(:) :: line_lengths + INTEGER, DIMENSION(1:3) :: letters + CHARACTER(LEN=3) :: lets + CHARACTER(KIND=C_CHAR,LEN=*) :: char_type + CHARACTER(KIND=C_CHAR,LEN=1) :: char_tmp + INTEGER :: i, j, n, ff + + ! Convert the letters and special character to integers + lets = 'abc' + + READ(lets,'(3A1)') letters + READ(char_type,'(A1)') ff + n = SIZE(data_in) + j = 1 + DO i=1,n-1 + IF( j .EQ. 4 )THEN + WRITE(char_tmp,'(A1)') ff + data_in(i:i) = char_tmp + ELSE + WRITE(char_tmp,'(A1)') letters(j) + data_in(i:i) = char_tmp + ENDIF + line_lengths(i) = LEN_TRIM(data_in(i)) + j = j + 1 + IF( j .EQ. 5 ) j = 1 + END DO + WRITE(char_tmp,'(A1)') ff + data_in(n:n) = char_tmp + line_lengths(n) = 1 + +END SUBROUTINE setup_buffer + +!------------------------------------------------------------------------- +! Function: test_nbit +! +! Purpose: Tests (real, 4 byte) datatype for nbit filter +! +! Return: Success: 0 +! Failure: >0 +! +! Programmer: M. Scot Breitenfeld +! Decemeber 7, 2010 +! +! Modifications: Moved this subroutine from the 1.8 test file and +! modified it to use F2003 features. +! This routine requires 4 byte reals, so we use F2003 features to +! ensure the requirement is satisfied in a portable way. +! The need for this arises when a user specifies the default real is 8 bytes. +! MSB 7/31/12 +! +!------------------------------------------------------------------------- +! + +SUBROUTINE test_nbit(total_error ) + + IMPLICIT NONE + INTEGER, PARAMETER :: wp = C_FLOAT !should map to REAL*4 on most modern processors + INTEGER, INTENT(INOUT) :: total_error + INTEGER(hid_t) :: file + + INTEGER(hid_t) :: dataset, datatype, space, dc, mem_type_id + INTEGER(hsize_t), DIMENSION(1:2) :: dims = (/2,5/) + INTEGER(hsize_t), DIMENSION(1:2) :: chunk_dim = (/2,5/) + ! orig_data[] are initialized to be within the range that can be represented by + ! dataset datatype (no precision loss during datatype conversion) + ! + REAL(kind=wp), DIMENSION(1:2,1:5), TARGET :: orig_data = & + RESHAPE( (/188384.00, 19.103516, -1.0831790e9, -84.242188, & + 5.2045898, -49140.000, 2350.2500, -3.2110596e-1, 6.4998865e-5, -0.0000000/) , (/2,5/) ) + REAL(kind=wp), DIMENSION(1:2,1:5), TARGET :: new_data + INTEGER(size_t) :: PRECISION, offset + INTEGER :: error + LOGICAL :: status + INTEGER(hsize_t) :: i, j + TYPE(C_PTR) :: f_ptr + + ! check to see if filter is available + CALL H5Zfilter_avail_f(H5Z_FILTER_NBIT_F, status, error) + IF(.NOT.status)THEN ! We don't have H5Z_FILTER_NBIT_F filter + total_error = -1 ! so return + RETURN + ENDIF + + CALL H5Fcreate_f("nbit.h5", H5F_ACC_TRUNC_F, file, error) + CALL check("H5Fcreate_f", error, total_error) + + ! Define dataset datatype (integer), and set precision, offset + CALL H5Tcopy_f(H5T_IEEE_F32BE, datatype, error) + CALL CHECK(" H5Tcopy_f", error, total_error) + CALL H5Tset_fields_f(datatype, 26_size_t, 20_size_t, 6_size_t, 7_size_t, 13_size_t, error) + CALL CHECK(" H5Tset_fields_f", error, total_error) + offset = 7 + CALL H5Tset_offset_f(datatype, offset, error) + CALL CHECK(" H5Tset_offset_f", error, total_error) + PRECISION = 20 + CALL H5Tset_precision_f(datatype,PRECISION, error) + CALL CHECK(" H5Tset_precision_f", error, total_error) + + CALL H5Tset_size_f(datatype, 4_size_t, error) + CALL CHECK(" H5Tset_size_f", error, total_error) + + CALL H5Tset_ebias_f(datatype, 31_size_t, error) + CALL CHECK(" H5Tset_ebias_f", error, total_error) + + ! Create the data space + CALL H5Screate_simple_f(2, dims, space, error) + CALL CHECK(" H5Screate_simple_f", error, total_error) + + ! USE nbit filter + CALL H5Pcreate_f(H5P_DATASET_CREATE_F, dc, error) + CALL CHECK(" H5Pcreate_f", error, total_error) + + CALL H5Pset_chunk_f(dc, 2, chunk_dim, error) + CALL CHECK(" H5Pset_chunk_f", error, total_error) + CALL H5Pset_nbit_f(dc, error) + CALL CHECK(" H5Pset_nbit_f", error, total_error) + + ! Create the dataset + CALL H5Dcreate_f(file, "nbit_real", datatype, & + space, dataset, error, dc) + CALL CHECK(" H5Dcreate_f", error, total_error) + + !---------------------------------------------------------------------- + ! STEP 1: Test nbit by setting up a chunked dataset and writing + ! to it. + !---------------------------------------------------------------------- + ! + mem_type_id = h5kind_to_type(wp,H5_REAL_KIND) + + f_ptr = C_LOC(orig_data(1,1)) + CALL H5Dwrite_f(dataset, mem_type_id, f_ptr, error) + CALL CHECK(" H5Dwrite_f", error, total_error) + + !---------------------------------------------------------------------- + ! STEP 2: Try to read the data we just wrote. + !---------------------------------------------------------------------- + ! + f_ptr = C_LOC(new_data(1,1)) + CALL H5Dread_f(dataset, mem_type_id, f_ptr, error) + CALL CHECK(" H5Dread_f", error, total_error) + + ! Check that the values read are the same as the values written + ! Assume size of long long = size of double + ! + i_loop: DO i = 1, dims(1) + j_loop: DO j = 1, dims(2) + + IF(.NOT.(orig_data(i,j).EQ.orig_data(i,j))) CYCLE ! skip IF value is NaN + + IF( .NOT.check_real_eq( new_data(i,j), orig_data(i,j)) ) THEN + total_error = total_error + 1 + WRITE(*,'(" Read different values than written.")') + WRITE(*,'(" At index ", 2(1X,I0))') i, j + EXIT i_loop + END IF + ENDDO j_loop + ENDDO i_loop + + !---------------------------------------------------------------------- + ! Cleanup + !---------------------------------------------------------------------- + ! + CALL H5Tclose_f(datatype, error) + CALL CHECK(" H5Tclose_f", error, total_error) + CALL H5Pclose_f(dc, error) + CALL CHECK(" H5Pclose_f", error, total_error) + CALL H5Sclose_f(space, error) + CALL CHECK(" H5Sclose_f", error, total_error) + CALL H5Dclose_f(dataset, error) + CALL CHECK(" H5Dclose_f", error, total_error) + CALL H5Fclose_f(file, error) + CALL CHECK(" H5Fclose_f", error, total_error) + +END SUBROUTINE test_nbit + + +SUBROUTINE t_enum_conv(total_error) + +!------------------------------------------------------------------------- +! Subroutine: t_enum_conv +! +! Purpose: Tests converting data from enumeration datatype +! to numeric (integer or floating-point number) +! datatype. Tests various KINDs of INTEGERs +! and REALs. Checks reading enum data into +! INTEGER and REAL KINDs. +! +! Return: Success: 0 +! Failure: number of errors +! +! Programmer: M. Scot Breitenfeld +! October 27, 2012 +! +! Note: Adapted from C test (enum.c -- test_conv) +! No reliance on C tests. +!------------------------------------------------------------------------- +! + + IMPLICIT NONE + + INTEGER, INTENT(INOUT) :: total_error + + INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(9) !should map to INTEGER*4 on most modern processors + INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(18) !should map to INTEGER*8 on most modern processors + + INTEGER, PARAMETER :: real_kind_7 = C_FLOAT !should map to REAL*4 on most modern processors + + INTEGER(hid_t) :: cwg=-1, dtype=-1, space=-1, dset=-1 ! Handles + INTEGER(hid_t) :: file ! Handles + + ! Enumerated type + ENUM, BIND(C) + ENUMERATOR :: E1_RED, E1_GREEN, E1_BLUE, E1_WHITE, E1_BLACK + END ENUM + + INTEGER(KIND(E1_RED)), TARGET :: val + + ! Enumerated data array + ! Some values are out of range for testing. The library should accept them + INTEGER(KIND(E1_RED)), DIMENSION(1:20), TARGET :: data1 = (/INT(E1_RED,KIND(E1_RED)), & + INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & + INT(E1_GREEN,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)), & + INT(E1_WHITE,KIND(E1_RED)), INT(E1_BLACK,KIND(E1_RED)), & + INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & + INT(E1_RED,KIND(E1_RED)), INT(E1_RED,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & + INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLACK,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)),& + INT(E1_RED,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)), & + INT(0,KIND(E1_RED)), INT(-1,KIND(E1_RED)), INT(-2,KIND(E1_RED))/) + + ! Reading array for enum data + INTEGER(KIND(E1_RED)), DIMENSION(1:20), TARGET :: data2 + + ! Reading array's for converted enum data + INTEGER(C_SHORT), DIMENSION(1:20), TARGET :: data_short + INTEGER(C_INT), DIMENSION(1:20), TARGET :: data_int + REAL(C_DOUBLE), DIMENSION(1:20), TARGET :: data_double + + INTEGER(int_kind_8), DIMENSION(1:20), TARGET :: data_i8 + INTEGER(int_kind_16), DIMENSION(1:20), TARGET :: data_i16 + REAL(real_kind_7), DIMENSION(1:20), TARGET :: data_r7 + + INTEGER(hsize_t), DIMENSION(1:1) :: ds_size = (/20/) + INTEGER(size_t) :: i + INTEGER(hsize_t) :: ih + INTEGER :: error + TYPE(C_PTR) :: f_ptr + INTEGER(HID_T) :: m_baset ! Memory base type + ! + ! Create a new file using the default properties. + ! + CALL h5fcreate_f("enum1.h5", H5F_ACC_TRUNC_F, file, error) + CALL check("h5fcreate_f", error, total_error) + ! + ! Create a new group using the default properties. + ! + CALL h5gcreate_f(file, "test_conv", cwg, error) + CALL check("h5gcreate_f",error, total_error) + ! + ! Create a enum type + ! + CALL H5Tcreate_f(H5T_ENUM_F, H5OFFSETOF(C_LOC(data1(1)), C_LOC(data1(2))), dtype, error) + CALL check("h5tcreate_f",error, total_error) + ! + ! Initialize enum data. + ! + + val = E1_RED + CALL H5Tenum_insert_f(dtype, "RED", C_LOC(val), error) + CALL check("h5tenum_insert_f",error, total_error) + val = E1_GREEN + f_ptr = C_LOC(val) + CALL H5Tenum_insert_f(dtype, "GREEN", f_ptr, error) + CALL check("h5tenum_insert_f",error, total_error) + val = E1_BLUE + f_ptr = C_LOC(val) + CALL H5Tenum_insert_f(dtype, "BLUE", f_ptr, error) + CALL check("h5tenum_insert_f",error, total_error) + val = E1_WHITE + f_ptr = C_LOC(val) + CALL H5Tenum_insert_f(dtype, "WHITE", f_ptr, error) + CALL check("h5tenum_insert_f",error, total_error) + val = E1_BLACK + f_ptr = C_LOC(val) + CALL H5Tenum_insert_f(dtype, "BLACK", f_ptr, error) + CALL check("h5tenum_insert_f",error, total_error) + ! + ! Create dataspace. Setting maximum size to be the current size. + ! + CALL h5screate_simple_f(1, ds_size, space, error) + CALL check("h5screate_simple_f", error, total_error) + + ! *************************************** + ! * Dataset of enumeration type + ! *************************************** + ! + ! Create a dataset of enum type and write enum data to it + + CALL h5dcreate_f(cwg, "color_table1", dtype, space, dset, error) + CALL check("h5dcreate_f", error, total_error) + + f_ptr = C_LOC(data1(1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) + CALL check(" h5dwrite_f", error, total_error) + + ! Test reading back the data with no conversion + + f_ptr = C_LOC(data2(1)) + CALL h5dread_f(dset, dtype, f_ptr, error, space, space) + CALL check(" h5dread_f", error, total_error) + + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. data2(ih))THEN + total_error = total_error + 1 + WRITE(*,'(" 1. data1(",I0,")=",I0," .NE. data2(",I0,")=",I0)') ih, data1(ih),i,data2(ih) + EXIT + ENDIF + ENDDO + + ! Test converting the data to integer (KIND=C_SHORT). Read enum data back as integer + m_baset = h5kind_to_type(KIND(data_short(1)), H5_INTEGER_KIND) ! Memory base type + f_ptr = C_LOC(data_short(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. data_short(ih))THEN + total_error = total_error + 1 + WRITE(*,'(" 2. data1(",I0,")=",I0," .NE. data_short(",I0,")=",I0)') ih, data1(ih),i,data_short(ih) + EXIT + ENDIF + ENDDO + + ! Test converting the data to (KIND=C_double) number. + ! Read enum data back as (KIND=C_double) number + + m_baset = h5kind_to_type(KIND(data_double(1)), H5_REAL_KIND) ! Memory base type + f_ptr = C_LOC(data_double(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_double(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 3. data_double(",I0,")=",I0," .NE. data_double(",I0,")=",I0)') & + ih, INT(data1(ih)), ih, INT(data_double(ih)) + EXIT + ENDIF + ENDDO + + ! Test converting the data to (SELECTED_INT_KIND(9)) number. + ! Read enum data back as (SELECTED_INT_KIND(9)) number + + m_baset = h5kind_to_type(int_kind_8, H5_INTEGER_KIND) ! Memory base type + f_ptr = C_LOC(data_i8(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_i8(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 4. data_i8(",I0,")=",I0," .NE. data_i8(",I0,")=",I0)') & + ih, INT(data1(ih)), i, INT(data_i8(ih)) + EXIT + ENDIF + ENDDO + + ! Test converting the data to (SELECTED_INT_KIND(18)) number. + ! Read enum data back as (SELECTED_INT_KIND(18)) number + + m_baset = h5kind_to_type(int_kind_16, H5_INTEGER_KIND) ! Memory base type + f_ptr = C_LOC(data_i16(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_i16(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 5. data_i16(",I0,")=",I0," .NE. data_i16(",I0,")=",I0)') & + ih, INT(data1(ih)), i, INT(data_i16(ih)) + EXIT + ENDIF + ENDDO + + ! Test converting the data to C_FLOAT number. + ! Read enum data back as C_FLOAT number + + m_baset = h5kind_to_type(KIND(data_r7(1)), H5_REAL_KIND) ! Memory base type + f_ptr = C_LOC(data_r7(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + ! Check values + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_r7(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 6. data_r7(",I0,")=",I0," .NE. data_r7(",I0,")=",I0)') & + ih, INT(data1(ih)), i, INT(data_r7(ih)) + EXIT + ENDIF + ENDDO + + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f", error, total_error) + + ! *************************************** + ! * Dataset of C_int type + ! *************************************** + + ! Create a integer dataset of KIND=C_INT and write enum data to it + m_baset = h5kind_to_type(KIND(data_int(1)), H5_INTEGER_KIND) ! Memory base type + CALL h5dcreate_f(cwg, "color_table2", m_baset, space, dset, error) + CALL check("h5dcreate_f", error, total_error) + + ! Write the enum data + f_ptr = C_LOC(data1(1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) + CALL check("h5dwrite_f", error, total_error) + + ! Test reading back the data with no conversion + f_ptr = C_LOC(data_int(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. data_int(ih))THEN + total_error = total_error + 1 + WRITE(*,'(" 7. data1(",I0,")=",I0," .NE. data_int(",I0,")=",I0)') ih, data1(ih),i,data_int(ih) + EXIT + ENDIF + ENDDO + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f", error, total_error) + + !************************************** + !* Dataset of C_double type + !************************************** + + ! Create a dataset of KIND=C_DOUBLE and write enum data to it + m_baset = h5kind_to_type(KIND(data_double(1)), H5_REAL_KIND) ! Memory base type + CALL h5dcreate_f(cwg, "color_table3", m_baset, space, dset, error) + CALL check("h5dcreate_f", error, total_error) + + f_ptr = C_LOC(data1(1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) + CALL check("h5dwrite_f", error, total_error) + + ! Test reading back the data with no conversion + f_ptr = C_LOC(data_double(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_double(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 8. data1(",I0,")=",I0," .NE. data_double(",I0,")=",I0)') ih, data1(ih),ih,INT(data_double(ih)) + EXIT + ENDIF + ENDDO + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f", error, total_error) + + !********************************************************* + !* Dataset of real C_FLOAT type + !********************************************************* + + ! Create a dataset of C_FLOAT and write enum data to it + m_baset = h5kind_to_type(KIND(data_r7(1)), H5_REAL_KIND) ! Memory base type + CALL h5dcreate_f(cwg, "color_table4", m_baset, space, dset, error) + CALL check("h5dcreate_f", error, total_error) + + f_ptr = C_LOC(data1(1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) + CALL check("h5dwrite_f", error, total_error) + + ! Test reading back the data with no conversion + f_ptr = C_LOC(data_r7(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. INT(data_r7(ih)))THEN + total_error = total_error + 1 + WRITE(*,'(" 9. data1(",I0,")=",I0," .NE. data_r7(",I0,")=",I0)') ih, data1(ih),ih,INT(data_r7(ih)) + EXIT + ENDIF + ENDDO + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f", error, total_error) + + ! ***************************************************************** + ! * Dataset of integer SELECTED_INT_KIND(18) type + ! ***************************************************************** + + ! Create a integer dataset of (SELECTED_INT_KIND(18)) and write enum data to it + m_baset = h5kind_to_type(KIND(data_i16(1)), H5_INTEGER_KIND) ! Memory base type + CALL h5dcreate_f(cwg, "color_table5", m_baset, space, dset, error) + CALL check("h5dcreate_f", error, total_error) + + ! Write the enum data + f_ptr = C_LOC(data1(1)) + CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) + CALL check("h5dwrite_f", error, total_error) + + ! Test reading back the data with no conversion + f_ptr = C_LOC(data_i16(1)) + CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) + CALL check("h5dread_f", error, total_error) + + DO ih = 1, ds_size(1) + IF(data1(ih) .NE. data_i16(ih))THEN + total_error = total_error + 1 + WRITE(*,'(" 10. data1(",I0,")=",I0," .NE. data_i16(",I0,")=",I0)') ih, data1(ih),ih,data_i16(ih) + EXIT + ENDIF + ENDDO + CALL h5dclose_f(dset, error) + CALL check("h5dclose_f", error, total_error) + + ! + ! Close and release resources. + ! + CALL h5sclose_f(space, error) + CALL check("H5Sclose_f", error, total_error) + CALL h5tclose_f(dtype, error) + CALL check("H5Tclose_f", error, total_error) + CALL h5gclose_f(cwg, error) + CALL check("h5gclose_f",error, total_error) + CALL h5fclose_f(file, error) + CALL check("H5Fclose_f", error, total_error) + +END SUBROUTINE t_enum_conv + +END MODULE TH5T_F03 diff --git a/fortran/test/tH5T_F03.f90 b/fortran/test/tH5T_F03.f90 deleted file mode 100644 index 32531b0..0000000 --- a/fortran/test/tH5T_F03.f90 +++ /dev/null @@ -1,3453 +0,0 @@ -!****h* root/fortran/test/tH5T_F03.f90 -! -! NAME -! tH5T_F03.f90 -! -! FUNCTION -! Test FORTRAN HDF5 H5T APIs which are dependent on FORTRAN 2003 -! features. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! CONTAINS SUBROUTINES -! test_array_compound_atomic, test_array_compound_array, -! test_array_bkg, test_h5kind_to_type -! -!***** - -! ***************************************** -! *** H 5 T T E S T S -! ***************************************** - -!*************************************************************** -!** -!** test_array_compound_atomic(): Test basic array datatype code. -!** Tests 1-D array of compound datatypes (with no array fields) -!** -!*************************************************************** -! - -MODULE TH5T_F03 - - USE HDF5 - USE ISO_C_BINDING - -CONTAINS - -SUBROUTINE test_array_compound_atomic(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - ! 1-D dataset WITH fixed dimensions - INTEGER, PARAMETER :: SPACE1_RANK = 1 - INTEGER, PARAMETER :: SPACE1_DIM1 = 4 - ! 1-D array datatype - INTEGER, PARAMETER :: ARRAY1_RANK= 1 - INTEGER, PARAMETER :: ARRAY1_DIM1= 4 - CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray1.h5" - - TYPE s1_t - INTEGER :: i - REAL :: f - END TYPE s1_t - TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: wdata ! Information to write - TYPE(s1_t), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Information read in - INTEGER(hid_t) :: fid1 ! HDF5 File IDs - INTEGER(hid_t) :: dataset ! Dataset ID - INTEGER(hid_t) :: sid1 ! Dataspace ID - INTEGER(hid_t) :: tid1 ! Array Datatype ID - INTEGER(hid_t) :: tid2 ! Compound Datatype ID - - INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) - INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) - INTEGER :: ndims ! Array rank for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading - INTEGER :: nmemb ! Number of compound members - CHARACTER(LEN=20) :: mname ! Name of compound field - INTEGER(size_t) :: off ! Offset of compound field - INTEGER(hid_t) :: mtid ! Datatype ID for field - INTEGER :: i,j ! counting variables - - INTEGER :: error ! Generic RETURN value - INTEGER :: namelen - LOGICAL :: flag - - TYPE(C_PTR) :: f_ptr ! Needed to pass the pointer, for g95 compiler to work - - ALLOCATE( wdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) - ALLOCATE( rdata(1:SPACE1_DIM1,1:ARRAY1_DIM1) ) - - ! Initialize array data to write - DO i = 1, SPACE1_DIM1 - DO j = 1, ARRAY1_DIM1 - wdata(i,j)%i = i * 10 + j - wdata(i,j)%f = i * 2.5 + j - ENDDO - ENDDO - - ! Create file - CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) - CALL check("h5fcreate_f", error, total_error) - - ! Create dataspace for datasets - CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) - CALL check("h5screate_simple_f", error, total_error) - - CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) - CALL check("h5tcreate_f", error, total_error) - - ! Insert integer field - CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) - CALL check("h5tinsert_f", error, total_error) - - ! Insert float field - - CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), H5T_NATIVE_REAL, error) - CALL check("h5tinsert_f", error, total_error) - - ! Create an array datatype to refer to - CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) - CALL check("h5tarray_create_f", error, total_error) - - ! Close compound datatype - CALL h5tclose_f(tid2,error) - CALL check("h5tclose_f", error, total_error) - - - ! Create a dataset - CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) - CALL check("h5dcreate_f", error, total_error) - - ! Write dataset to disk - - ALLOCATE(rdims(1:2)) ! dummy not needed - - f_ptr = C_LOC(wdata(1,1)) - CALL h5dwrite_f(dataset, tid1, f_ptr, error ) - CALL check("h5dwrite_f", error, total_error) - ! Close Dataset - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - ! Close datatype - CALL h5tclose_f(tid1,error) - CALL check("h5tclose_f", error, total_error) - - ! Close disk dataspace - CALL h5sclose_f(sid1,error) - CALL check("h5sclose_f", error, total_error) - - ! Close file - CALL h5fclose_f(fid1,error) - CALL check("h5fclose_f", error, total_error) - - ! Re-open file - CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) - CALL check("h5fopen_f", error, total_error) - - ! Open the dataset - CALL h5dopen_f(fid1, "Dataset1", dataset, error) - CALL check("h5dopen_f", error, total_error) - - ! Get the datatype - CALL h5dget_type_f(dataset, tid1, error) - CALL check("h5dget_type_f", error, total_error) - - ! Check the array rank - CALL h5tget_array_ndims_f(tid1, ndims, error) - CALL check("h5tget_array_ndims_f", error, total_error) - CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - - ! Get the array dimensions - ALLOCATE(rdims1(1:ndims)) - CALL h5tget_array_dims_f(tid1, rdims1, error) - CALL check("h5tget_array_dims_f", error, total_error) - - - ! Check the array dimensions - DO i = 1, ndims - CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) - ENDDO - - ! Get the compound datatype - CALL h5tget_super_f(tid1, tid2, error) - CALL check("h5tget_super_f", error, total_error) - - ! Check the number of members - CALL h5tget_nmembers_f(tid2, nmemb, error) - CALL check("h5tget_nmembers_f", error, total_error) - CALL VERIFY("h5tget_nmembers_f", nmemb, 2, total_error) - - ! Check the 1st field's name - CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) - CALL check("H5Tget_member_name_f", error, total_error) - CALL verifystring("H5Tget_member_name_f",mname(1:namelen),"i", total_error) - - ! Check the 1st field's offset - CALL H5Tget_member_offset_f(tid2, 0, off, error) - CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) - - - ! Check the 1st field's datatype - CALL H5Tget_member_type_f(tid2, 0, mtid, error) - CALL check("H5Tget_member_type_f", error, total_error) - - CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) - CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) - - CALL h5tclose_f(mtid,error) - CALL check("h5tclose_f", error, total_error) - - ! Check the 2nd field's name - CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) - CALL check("H5Tget_member_name_f", error, total_error) - CALL verifystring("H5Tget_member_name_f",mname(1:namelen),"f", total_error) - - ! Check the 2nd field's offset - CALL H5Tget_member_offset_f(tid2, 1, off, error) - CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) - - ! Check the 2nd field's datatype - CALL H5Tget_member_type_f(tid2, 1, mtid, error) - CALL check("H5Tget_member_type_f", error, total_error) - - CALL H5Tequal_f(mtid, H5T_NATIVE_REAL, flag, error) - CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) - - CALL h5tclose_f(mtid,error) - CALL check("h5tclose_f", error, total_error) - - ! Close Compound Datatype - CALL h5tclose_f(tid2, error) - CALL check("h5tclose_f", error, total_error) - - ! Read dataset from disk - - f_ptr = C_LOC(rdata(1,1)) - CALL H5Dread_f(dataset, tid1, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - ! Compare data read in - DO i = 1, SPACE1_DIM1 - DO j = 1, ARRAY1_DIM1 - IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN - PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(wdata(i,j)%f,dp), REAL( rdata(i,j)%f, dp)) ) THEN - PRINT*, 'ERROR: Wrong real data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - - ! Close Datatype - CALL h5tclose_f(tid1,error) - CALL check("h5tclose_f", error, total_error) - - ! Close Dataset - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - ! Close file - CALL h5fclose_f(fid1,error) - CALL check("h5fclose_f", error, total_error) - -END SUBROUTINE test_array_compound_atomic -!!$ -!!$!*************************************************************** -!!$!** -!!$!** test_array_compound_array(): Test basic array datatype code. -!!$!** Tests 1-D array of compound datatypes (with array fields) -!!$!** -!!$!*************************************************************** -!!$ - SUBROUTINE test_array_compound_array(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - ! 1-D array datatype - INTEGER, PARAMETER :: ARRAY1_RANK= 1 - INTEGER, PARAMETER :: ARRAY1_DIM1= 3 - INTEGER, PARAMETER :: ARRAY2_DIM1= 5 - - INTEGER, PARAMETER :: SPACE1_RANK = 1 - INTEGER, PARAMETER :: SPACE1_DIM1 = 4 - CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray2.h5" - - TYPE st_t_struct ! Typedef for compound datatype - INTEGER :: i - REAL, DIMENSION(1:ARRAY2_DIM1) :: f - CHARACTER(LEN=2), DIMENSION(1:ARRAY2_DIM1) :: c - END TYPE st_t_struct - ! Information to write - TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: wdata - ! Information read in - TYPE(st_t_struct), DIMENSION(1:SPACE1_DIM1,1:ARRAY1_DIM1), TARGET :: rdata - - - INTEGER(hid_t) :: fid1 ! HDF5 File IDs - INTEGER(hid_t) :: dataset ! Dataset ID - integer(hid_t) :: sid1 ! Dataspace ID - integer(hid_t) :: tid1 ! Array Datatype ID - integer(hid_t) :: tid2 ! Compound Datatype ID - integer(hid_t) :: tid3 ! Nested Array Datatype ID - integer(hid_t) :: tid4 ! Nested Array Datatype ID - - INTEGER(HSIZE_T), DIMENSION(1) :: sdims1 = (/SPACE1_DIM1/) - INTEGER(HSIZE_T), DIMENSION(1) :: tdims1=(/ARRAY1_DIM1/) - INTEGER(HSIZE_T), DIMENSION(1) :: tdims2=(/ARRAY2_DIM1/) - - INTEGER ndims ! Array rank for reading - - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - - INTEGER :: nmemb ! Number of compound members - CHARACTER(LEN=20) :: mname ! Name of compound field - INTEGER(size_t) :: off ! Offset of compound field - INTEGER(hid_t) :: mtid ! Datatype ID for field - INTEGER(hid_t) :: mtid2 ! Datatype ID for field - - INTEGER :: mclass ! Datatype class for field - INTEGER :: i,j,k ! counting variables - - INTEGER :: error - CHARACTER(LEN=2) :: ichr2 - INTEGER :: namelen - LOGICAL :: flag - INTEGER(HID_T) :: atype_id !String Attribute Datatype identifier - INTEGER(SIZE_T) :: attrlen ! Length of the attribute string - - TYPE(c_ptr) :: f_ptr - - ! Initialize array data to write - DO i = 1, SPACE1_DIM1 - DO j = 1, array1_DIM1 - wdata(i,j)%i = i*10+j - DO k = 1, ARRAY2_DIM1 - wdata(i,j)%f(k) = 10*i+j+.5 - WRITE(ichr2,'(I2.2)') k - wdata(i,j)%c(k) = ichr2 - ENDDO - ENDDO - ENDDO - - ! Create file - CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid1,error) - CALL check("h5fcreate_f", error, total_error) - - - ! Create dataspace for datasets - CALL h5screate_simple_f(SPACE1_RANK, sdims1, sid1, error) - CALL check("h5screate_simple_f", error, total_error) - - ! Create a compound datatype to refer to - ! - CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(wdata(1,1)), C_LOC(wdata(2,1))), tid2, error) - CALL check("h5tcreate_f", error, total_error) - - ! Insert integer field - CALL h5tinsert_f(tid2, "i", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%i)), H5T_NATIVE_INTEGER, error) - CALL check("h5tinsert_f", error, total_error) - - ! Create an array of floats datatype - CALL h5tarray_create_f(H5T_NATIVE_REAL, ARRAY1_RANK, tdims2, tid3, error) - CALL check("h5tarray_create_f", error, total_error) - ! Insert float array field - - CALL h5tinsert_f(tid2, "f", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f)), tid3, error) - CALL check("h5tinsert_f", error, total_error) - - ! - ! Create datatype for the String attribute. - ! - CALL h5tcopy_f(H5T_NATIVE_CHARACTER, atype_id, error) - CALL check("h5tcopy_f",error,total_error) - - attrlen = LEN(wdata(1,1)%c(1)) - CALL h5tset_size_f(atype_id, attrlen, error) - CALL check("h5tset_size_f",error,total_error) - - ! Create an array of character datatype - CALL h5tarray_create_f(atype_id, ARRAY1_RANK, tdims2, tid4, error) - CALL check("h5tarray_create_f", error, total_error) - - ! Insert character array field - CALL h5tinsert_f(tid2, "c", H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1))), tid4, error) - CALL check("h5tinsert2_f", error, total_error) - - ! Close array of floats field datatype - CALL h5tclose_f(tid3,error) - CALL check("h5tclose_f", error, total_error) - - CALL h5tclose_f(tid4,error) - CALL check("h5tclose_f", error, total_error) - - ! Create an array datatype to refer to - CALL h5tarray_create_f(tid2, ARRAY1_RANK, tdims1, tid1, error) - CALL check("h5tarray_create_f", error, total_error) - - ! Close compound datatype - CALL h5tclose_f(tid2,error) - CALL check("h5tclose_f", error, total_error) - - ! Create a dataset - CALL h5dcreate_f(fid1,"Dataset1",tid1, sid1, dataset,error) - CALL check("h5dcreate_f", error, total_error) - - - ! Write dataset to disk - f_ptr = C_LOC(wdata(1,1)) - CALL h5dwrite_f(dataset, tid1, f_ptr, error ) - CALL check("h5dwrite_f", error, total_error) - - ! Close Dataset - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - ! Close datatype - CALL h5tclose_f(tid1,error) - CALL check("h5tclose_f", error, total_error) - - ! Close disk dataspace - CALL h5sclose_f(sid1,error) - CALL check("h5sclose_f", error, total_error) - - ! Close file - CALL h5fclose_f(fid1,error) - CALL check("h5fclose_f", error, total_error) - - ! Re-open file - CALL h5fopen_f (FILENAME, H5F_ACC_RDONLY_F, fid1, error) - CALL check("h5fopen_f", error, total_error) - - ! Open the dataset - - CALL h5dopen_f(fid1, "Dataset1", dataset, error) - CALL check("h5dopen_f", error, total_error) - - ! Get the datatype - CALL h5dget_type_f(dataset, tid1, error) - CALL check("h5dget_type_f", error, total_error) - - ! Check the array rank - CALL h5tget_array_ndims_f(tid1, ndims, error) - CALL check("h5tget_array_ndims_f", error, total_error) - CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - - - ! Get the array dimensions - ALLOCATE(rdims1(1:ndims)) - CALL h5tget_array_dims_f(tid1, rdims1, error) - CALL check("h5tget_array_dims_f", error, total_error) - - ! Check the array dimensions - DO i = 1, ndims - CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims1(i)), total_error) - ENDDO - - ! Get the compound datatype - CALL h5tget_super_f(tid1, tid2, error) - CALL check("h5tget_super_f", error, total_error) - - ! Check the number of members - CALL h5tget_nmembers_f(tid2, nmemb, error) - CALL check("h5tget_nmembers_f", error, total_error) - CALL VERIFY("h5tget_nmembers_f", nmemb, 3, total_error) - - ! Check the 1st field's name - CALL H5Tget_member_name_f(tid2, 0, mname, namelen,error) - CALL check("H5Tget_member_name_f", error, total_error) - CALL verifystring("H5Tget_member_name_f",mname(1:namelen),"i", total_error) - - ! Check the 1st field's offset - - CALL H5Tget_member_offset_f(tid2, 0, off, error) - CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),0, total_error) - - ! Check the 1st field's datatype - CALL H5Tget_member_type_f(tid2, 0, mtid, error) - CALL check("H5Tget_member_type_f", error, total_error) - - CALL H5Tequal_f(mtid, H5T_NATIVE_INTEGER, flag, error) - CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) - - CALL h5tclose_f(mtid,error) - CALL check("h5tclose_f", error, total_error) - - ! Check the 2nd field's name - CALL H5Tget_member_name_f(tid2, 1, mname, namelen,error) - CALL check("H5Tget_member_name_f", error, total_error) - CALL verifystring("H5Tget_member_name_f",mname(1:namelen),"f", total_error) - - ! Check the 2nd field's offset - CALL H5Tget_member_offset_f(tid2, 1, off, error) - CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%f))), total_error) - - ! Check the 2nd field's datatype - CALL H5Tget_member_type_f(tid2, 1, mtid, error) - CALL check("H5Tget_member_type_f", error, total_error) - - ! Get the 2nd field's class - CALL H5Tget_class_f(mtid, mclass, error) - CALL check("H5Tget_class_f", error, total_error) - CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) - - ! Check the array rank - CALL h5tget_array_ndims_f(mtid, ndims, error) - CALL check("h5tget_array_ndims_f", error, total_error) - CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - - ! Get the array dimensions - CALL h5tget_array_dims_f(mtid, rdims1, error) - CALL check("h5tget_array_dims_f", error, total_error) - - ! Check the array dimensions - DO i = 1, ndims - CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) - ENDDO - - ! Check the 3rd field's name - CALL H5Tget_member_name_f(tid2, 2, mname, namelen,error) - CALL check("H5Tget_member_name_f", error, total_error) - CALL verifystring("H5Tget_member_name_f",mname(1:namelen),"c", total_error) - - ! Check the 3rd field's offset - CALL H5Tget_member_offset_f(tid2, 2, off, error) - CALL check("H5Tget_member_offset_f", error, total_error) - CALL VERIFY("H5Tget_member_offset_f",INT(off),& - INT(H5OFFSETOF(C_LOC(wdata(1,1)),C_LOC(wdata(1,1)%c(1)(1:1)))), total_error) - - ! Check the 3rd field's datatype - CALL H5Tget_member_type_f(tid2, 2, mtid2, error) - CALL check("H5Tget_member_type_f", error, total_error) - - ! Get the 3rd field's class - CALL H5Tget_class_f(mtid2, mclass, error) - CALL check("H5Tget_class_f", error, total_error) - CALL VERIFY("H5Tget_class_f",mclass, H5T_ARRAY_F, total_error) - - ! Check the array rank - CALL h5tget_array_ndims_f(mtid2, ndims, error) - CALL check("h5tget_array_ndims_f", error, total_error) - CALL VERIFY("h5tget_array_ndims_f",ndims, ARRAY1_RANK, total_error) - - ! Get the array dimensions - CALL h5tget_array_dims_f(mtid2, rdims1, error) - CALL check("h5tget_array_dims_f", error, total_error) - - ! Check the array dimensions - DO i = 1, ndims - CALL VERIFY("h5tget_array_dims_f", INT(rdims1(i)), INT(tdims2(i)), total_error) - ENDDO - - ! Check the nested array's datatype - CALL H5Tget_super_f(mtid, tid3, error) - CALL check("H5Tget_super_f", error, total_error) - - CALL H5Tequal_f(tid3, H5T_NATIVE_REAL, flag, error) - CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) - - ! Check the nested array's datatype - CALL H5Tget_super_f(mtid2, tid3, error) - CALL check("H5Tget_super_f", error, total_error) - - CALL H5Tequal_f(tid3, atype_id, flag, error) - CALL check("H5Tequal_f", error, total_error) - CALL VerifyLogical("H5Tequal_f", flag, .TRUE., total_error) - - ! Close the array's base type datatype - CALL h5tclose_f(tid3, error) - CALL check("h5tclose_f", error, total_error) - - ! Close the member datatype - CALL h5tclose_f(mtid,error) - CALL check("h5tclose_f", error, total_error) - - ! Close the member datatype - CALL h5tclose_f(mtid2,error) - CALL check("h5tclose_f", error, total_error) - - ! Close Compound Datatype - CALL h5tclose_f(tid2,error) - CALL check("h5tclose_f", error, total_error) - - ! READ dataset from disk - - f_ptr = c_null_ptr - f_ptr = C_LOC(rdata(1,1)) - CALL H5Dread_f(dataset, tid1, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - ! Compare data read in - DO i = 1, SPACE1_DIM1 - DO j = 1, ARRAY1_DIM1 - IF(wdata(i,j)%i.NE.rdata(i,j)%i)THEN - PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - DO k = 1, ARRAY2_DIM1 - - IF(wdata(i,j)%f(k).NE.rdata(i,j)%f(k))THEN - PRINT*, 'ERROR: Wrong real array data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF(wdata(i,j)%c(k).NE.rdata(i,j)%c(k))THEN - PRINT*, 'ERROR: Wrong character array data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - ENDDO - - ! Close Datatype - CALL h5tclose_f(tid1,error) - CALL check("h5tclose_f", error, total_error) - - ! Close Dataset - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - ! Close file - CALL h5fclose_f(fid1,error) - CALL check("h5fclose_f", error, total_error) - END SUBROUTINE test_array_compound_array -!!$ -!!$!*************************************************************** -!!$!** -!!$!** test_array_bkg(): Test basic array datatype code. -!!$!** Tests reading compound datatype with array fields and -!!$!** writing partial fields. -!!$!** -!!$!*************************************************************** -!!$ - SUBROUTINE test_array_bkg(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - INTEGER, PARAMETER :: LENGTH = 5 - INTEGER, PARAMETER :: ALEN = 10 - INTEGER, PARAMETER :: RANK = 1 - INTEGER, PARAMETER :: NMAX = 100 - CHARACTER(LEN=17), PARAMETER :: FIELDNAME = "ArrayofStructures" - - INTEGER(hid_t) :: fid, array_dt - INTEGER(hid_t) :: space - INTEGER(hid_t) :: type - INTEGER(hid_t) :: dataset - - INTEGER(hsize_t), DIMENSION(1:1) :: dim =(/LENGTH/) - INTEGER(hsize_t), DIMENSION(1:1) :: dima =(/ALEN/) - - INTEGER :: i, j - INTEGER, DIMENSION(1:3) :: ndims = (/1,1,1/) - - TYPE CmpField_struct - INTEGER, DIMENSION(1:ALEN) :: a - REAL(KIND=sp), DIMENSION(1:ALEN) :: b - REAL(KIND=dp), DIMENSION(1:ALEN) :: c - ENDTYPE CmpField_struct - - TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cf - TYPE(CmpField_struct), DIMENSION(1:LENGTH), TARGET :: cfr - - TYPE CmpDTSinfo_struct - INTEGER :: nsubfields - CHARACTER(LEN=5), DIMENSION(1:nmax) :: name - INTEGER(size_t), DIMENSION(1:nmax) :: offset - INTEGER(hid_t), DIMENSION(1:nmax) :: datatype - END TYPE CmpDTSinfo_struct - - TYPE(CmpDTSinfo_struct) :: dtsinfo - - TYPE fld_t_struct - REAL(KIND=sp), DIMENSION(1:ALEN) :: b - END TYPE fld_t_struct - - INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype - INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype - INTEGER(SIZE_T) :: type_sized ! Size of the double datatype - INTEGER(SIZE_T) :: sizeof_compound ! total size of compound - - TYPE(fld_t_struct), DIMENSION(1:LENGTH), TARGET :: fld - TYPE(fld_t_struct), DIMENSION(1:LENGTH), TARGET :: fldr - - CHARACTER(LEN=10), PARAMETER :: FILENAME = "tarray3.h5" - - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims1 ! Array dimensions for reading - INTEGER(HSIZE_T), ALLOCATABLE, DIMENSION(:) :: rdims ! Array dimensions for reading - - INTEGER :: error - TYPE(c_ptr) :: f_ptr - -! Initialize the data -! ------------------- - - DO i = 1, LENGTH - DO j = 1, ALEN - cf(i)%a(j) = 100*(i+1) + j - cf(i)%b(j) = (100.*(i+1) + 0.01*j) - cf(i)%c(j) = 100.*(i+1) + 0.02*j - ENDDO - ENDDO - - ! Set the number of data members - ! ------------------------------ - - dtsinfo%nsubfields = 3 - - ! Initialize the offsets - ! ----------------------- - CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, error) - CALL check("h5tget_size_f", error, total_error) - IF(h5_sizeof(cf(1)%b(1)).EQ.4_size_t)THEN - CALL h5tget_size_f(H5T_NATIVE_REAL_4, type_sizer, error) - CALL check("h5tget_size_f", error, total_error) - ELSE IF(h5_sizeof(cf(1)%b(1)).EQ.8_size_t)THEN - CALL h5tget_size_f(H5T_NATIVE_REAL_8, type_sizer, error) - CALL check("h5tget_size_f", error, total_error) - ENDIF - - CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, error) - CALL check("h5tget_size_f", error, total_error) - - dtsinfo%offset(1) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%a(1))) - dtsinfo%offset(2) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%b(1))) - dtsinfo%offset(3) = H5OFFSETOF(C_LOC(cf(1)),C_LOC(cf(1)%c(1))) - - - ! Initialize the data type IDs - ! ---------------------------- - dtsinfo%datatype(1) = H5T_NATIVE_INTEGER; - dtsinfo%datatype(2) = H5T_NATIVE_REAL_4; - dtsinfo%datatype(3) = H5T_NATIVE_REAL_8; - - - ! Initialize the names of data members - ! ------------------------------------ - - dtsinfo%name(1) = "One " - dtsinfo%name(2) = "Two " - dtsinfo%name(3) = "Three" - - ! Create file - ! ----------- - CALL h5fcreate_f(FILENAME,H5F_ACC_TRUNC_F,fid,error) - CALL check("h5fcreate_f", error, total_error) - - - ! Create data space - ! ----------------- - CALL h5screate_simple_f(RANK, dim, space, error) - CALL check("h5screate_simple_f", error, total_error) - - - ! Create the memory data type - ! --------------------------- - - CALL h5tcreate_f(H5T_COMPOUND_F, H5OFFSETOF(C_LOC(cf(1)), C_LOC(cf(2))), type, error) - CALL check("h5tcreate_f", error, total_error) - - ! Add members to the compound data type - ! -------------------------------------- - - DO i = 1, dtsinfo%nsubfields - CALL h5tarray_create_f(dtsinfo%datatype(i), ndims(i), dima, array_dt, error) - CALL check("h5tarray_create_f", error, total_error) - CALL H5Tinsert_f(type, dtsinfo%name(i), dtsinfo%offset(i), array_dt, error) - CALL check("h5tinsert_f", error, total_error) - - CALL h5tclose_f(array_dt,error) - CALL check("h5tclose_f", error, total_error) - ENDDO - - ! Create the dataset - ! ------------------ / - CALL h5dcreate_f(fid,FIELDNAME,type, space, dataset,error) - CALL check("h5dcreate_f", error, total_error) - - ! Write data to the dataset - ! ------------------------- - - ALLOCATE(rdims(1:2)) ! dummy not needed - - f_ptr = C_LOC(cf(1)) - - CALL h5dwrite_f(dataset, type, f_ptr, error ) - CALL check("h5dwrite_f", error, total_error) - - - ALLOCATE(rdims1(1:2)) ! dummy not needed - f_ptr = C_LOC(cfr(1)) - CALL H5Dread_f(dataset, type, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - ! Verify correct data - ! ------------------- - DO i = 1, LENGTH - DO j = 1, ALEN - IF( cf(i)%a(j) .NE. cfr(i)%a(j) )THEN - PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%b(j),dp), REAL( cfr(i)%b(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong real data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%c(j),dp), REAL( cfr(i)%c(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong double data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - - - ! Release IDs - ! ----------- - CALL h5tclose_f(type,error) - CALL check("h5tclose_f", error, total_error) - CALL h5sclose_f(space,error) - CALL check("h5sclose_f", error, total_error) - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - CALL h5fclose_f(fid,error) - CALL check("h5fclose_f", error, total_error) - - !**************************** - ! Reopen the file and update - !**************************** - - CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) - CALL check("h5fopen_f", error, total_error) - - CALL h5dopen_f(fid, FIELDNAME, dataset, error) - CALL check("h5dopen_f", error, total_error) - - sizeof_compound = INT( type_sizer*ALEN, size_t) - - CALL h5tcreate_f(H5T_COMPOUND_F, sizeof_compound , type, error) - CALL check("h5tcreate_f", error, total_error) - - CALL h5tarray_create_f(H5T_NATIVE_REAL_4, 1, dima, array_dt, error) - CALL check("h5tarray_create_f", error, total_error) - - CALL h5tinsert_f(TYPE, "Two", 0_size_t, array_dt, error) - CALL check("h5tinsert_f", error, total_error) - - ! Initialize the data to overwrite - ! -------------------------------- - DO i = 1, LENGTH - DO j = 1, ALEN - fld(i)%b(j) = 1.313 - cf(i)%b(j) = fld(i)%b(j) - ENDDO - ENDDO - - f_ptr = C_LOC(fld(1)) - - CALL h5dwrite_f(dataset, TYPE, f_ptr, error ) - CALL check("h5dwrite_f", error, total_error) - - - ! Read just the field changed - - f_ptr = C_LOC(fldr(1)) - CALL H5Dread_f(dataset, TYPE, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - DO i = 1, LENGTH - DO j = 1, ALEN - IF( .NOT.dreal_eq( REAL(fld(i)%b(j),dp), REAL( fldr(i)%b(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong real data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - CALL h5tclose_f(TYPE,error) - CALL check("h5tclose_f", error, total_error) - CALL h5tclose_f(array_dt,error) - CALL check("h5tclose_f", error, total_error) - - CALL h5dget_type_f(dataset, type, error) - CALL check("h5dget_type_f", error, total_error) - - - ! Read the entire dataset again - - f_ptr = C_LOC(cfr(1)) - CALL H5Dread_f(dataset, TYPE, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - - ! Verify correct data - ! ------------------- - - DO i = 1, LENGTH - DO j = 1, ALEN - IF( cf(i)%a(j) .NE. cfr(i)%a(j) )THEN - PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%b(j),dp), REAL(cfr(i)%b(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong real data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%c(j),dp), REAL(cfr(i)%c(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong double data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - CALL h5tclose_f(type,error) - CALL check("h5tclose_f", error, total_error) - - CALL h5fclose_f(fid,error) - CALL check("h5fclose_f", error, total_error) - -!************************************************** -! Reopen the file and print out all the data again -!************************************************** - - CALL h5fopen_f (FILENAME, H5F_ACC_RDWR_F, fid, error) - CALL check("h5fopen_f", error, total_error) - - - CALL h5dopen_f(fid, FIELDNAME, dataset, error) - CALL check("h5dopen_f", error, total_error) - - - CALL h5dget_type_f(dataset, type, error) - CALL check("h5dget_type_f", error, total_error) - - - ! Reset the data to read in - ! ------------------------- - - DO i = 1, LENGTH - cfr(i)%a(:) = 0 - cfr(i)%b(:) = 0 - cfr(i)%c(:) = 0 - ENDDO - - f_ptr = C_LOC(cfr(1)) - CALL H5Dread_f(dataset, TYPE, f_ptr, error) - CALL check("H5Dread_f", error, total_error) - - ! Verify correct data - ! ------------------- - - DO i = 1, LENGTH - DO j = 1, ALEN - IF( cf(i)%a(j) .NE. cfr(i)%a(j) )THEN - PRINT*, 'ERROR: Wrong integer data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%b(j),dp), REAL(cfr(i)%b(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong real data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - IF( .NOT.dreal_eq( REAL(cf(i)%c(j),dp), REAL(cfr(i)%c(j), dp)) ) THEN - PRINT*, 'ERROR: Wrong double data is read back by H5Dread_f ' - total_error = total_error + 1 - ENDIF - ENDDO - ENDDO - - CALL h5dclose_f(dataset, error) - CALL check("h5dclose_f", error, total_error) - - CALL h5tclose_f(type,error) - CALL check("h5tclose_f", error, total_error) - - CALL h5fclose_f(fid,error) - CALL check("h5fclose_f", error, total_error) - - END SUBROUTINE test_array_bkg - - - - SUBROUTINE test_h5kind_to_type(total_error) - - USE ISO_C_BINDING - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - INTEGER, PARAMETER :: int_kind_1 = SELECTED_INT_KIND(Fortran_INTEGER_1) !should map to INTEGER*1 on most modern processors - INTEGER, PARAMETER :: int_kind_4 = SELECTED_INT_KIND(Fortran_INTEGER_2) !should map to INTEGER*2 on most modern processors - INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(Fortran_INTEGER_4) !should map to INTEGER*4 on most modern processors - INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(Fortran_INTEGER_8) !should map to INTEGER*8 on most modern processors - - INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors - INTEGER, PARAMETER :: real_kind_15 = SELECTED_REAL_KIND(Fortran_REAL_8) !should map to REAL*8 on most modern processors - - CHARACTER(LEN=12), PARAMETER :: filename = "dsetf_F03.h5" ! File name - CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname8 = "dset8" ! Dataset name - CHARACTER(LEN=6), PARAMETER :: dsetnamer = "dsetr" ! Dataset name - CHARACTER(LEN=6), PARAMETER :: dsetnamer4 = "dsetr4" ! Dataset name - CHARACTER(LEN=6), PARAMETER :: dsetnamer8 = "dsetr8" ! Dataset name - - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HID_T) :: dset_id1 ! Dataset identifier - INTEGER(HID_T) :: dset_id4 ! Dataset identifier - INTEGER(HID_T) :: dset_id8 ! Dataset identifier - INTEGER(HID_T) :: dset_id16 ! Dataset identifier - INTEGER(HID_T) :: dset_idr ! Dataset identifier - INTEGER(HID_T) :: dset_idr4 ! Dataset identifier - INTEGER(HID_T) :: dset_idr8 ! Dataset identifier - - INTEGER :: error ! Error flag - INTEGER :: i - -! Data buffers: - - INTEGER(int_kind_1), DIMENSION(1:4), TARGET :: dset_data_i1, data_out_i1 - INTEGER(int_kind_4), DIMENSION(1:4), TARGET :: dset_data_i4, data_out_i4 - INTEGER(int_kind_8), DIMENSION(1:4), TARGET :: dset_data_i8, data_out_i8 - INTEGER(int_kind_16), DIMENSION(1:4), TARGET :: dset_data_i16, data_out_i16 - - REAL, DIMENSION(1:4), TARGET :: dset_data_r, data_out_r - REAL(real_kind_7), DIMENSION(1:4), TARGET :: dset_data_r7, data_out_r7 - REAL(real_kind_15), DIMENSION(1:4), TARGET :: dset_data_r15, data_out_r15 - - INTEGER(HSIZE_T), DIMENSION(1:1) :: data_dims = (/4/) - INTEGER(HID_T) :: dspace_id ! Dataspace identifier - - TYPE(C_PTR) :: f_ptr - - ! - ! Initialize the dset_data array. - ! - DO i = 1, 4 - dset_data_i1(i) = i - dset_data_i4(i) = i - dset_data_i8(i) = i - dset_data_i16(i) = i - - dset_data_r(i) = (i)*100. - dset_data_r7(i) = (i)*100. - dset_data_r15(i) = (i)*1000. - - END DO - - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create dataspaces for datasets - ! - CALL h5screate_simple_f(1, data_dims , dspace_id, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset. - ! - CALL H5Dcreate_f(file_id, dsetname1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), dspace_id, dset_id1, error) - CALL check("H5Dcreate_f",error, total_error) - CALL H5Dcreate_f(file_id, dsetname2, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), dspace_id, dset_id4, error) - CALL check("H5Dcreate_f",error, total_error) - CALL H5Dcreate_f(file_id, dsetname4, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), dspace_id, dset_id8, error) - CALL check("H5Dcreate_f",error, total_error) - CALL H5Dcreate_f(file_id, dsetname8, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), dspace_id, dset_id16, error) - CALL check("H5Dcreate_f",error, total_error) - - CALL H5Dcreate_f(file_id, dsetnamer, H5T_NATIVE_REAL, dspace_id, dset_idr, error) - CALL check("H5Dcreate_f",error, total_error) - CALL H5Dcreate_f(file_id, dsetnamer4, h5kind_to_type(real_kind_7,H5_REAL_KIND), dspace_id, dset_idr4, error) - CALL check("H5Dcreate_f",error, total_error) - CALL H5Dcreate_f(file_id, dsetnamer8, h5kind_to_type(real_kind_15,H5_REAL_KIND), dspace_id, dset_idr8, error) - CALL check("H5Dcreate_f",error, total_error) - - ! - ! Write the dataset. - ! - f_ptr = C_LOC(dset_data_i1(1)) - CALL h5dwrite_f(dset_id1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_i4(1)) - CALL h5dwrite_f(dset_id4, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_i8(1)) - CALL h5dwrite_f(dset_id8, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_i16(1)) - CALL h5dwrite_f(dset_id16, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_r(1)) - CALL h5dwrite_f(dset_idr, H5T_NATIVE_REAL, f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_r7(1)) - CALL h5dwrite_f(dset_idr4, h5kind_to_type(real_kind_7,H5_REAL_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - f_ptr = C_LOC(dset_data_r15(1)) - CALL h5dwrite_f(dset_idr8, h5kind_to_type(real_kind_15,H5_REAL_KIND), f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - ! - ! Close the file - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f",error, total_error) - - ! Open the file - - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error) - CALL check("h5fopen_f",error, total_error) - ! - ! Read the dataset. - ! - ! Read data back into an integer size that is larger then the original size used for - ! writing the data - f_ptr = C_LOC(data_out_i1) - CALL h5dread_f(dset_id1, h5kind_to_type(int_kind_1,H5_INTEGER_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_i4) - CALL h5dread_f(dset_id4, h5kind_to_type(int_kind_4,H5_INTEGER_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_i8) - CALL h5dread_f(dset_id8, h5kind_to_type(int_kind_8,H5_INTEGER_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_i16) - CALL h5dread_f(dset_id16, h5kind_to_type(int_kind_16,H5_INTEGER_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_r) - CALL h5dread_f(dset_idr, H5T_NATIVE_REAL, f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_r7) - CALL h5dread_f(dset_idr4, h5kind_to_type(real_kind_7,H5_REAL_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - f_ptr = C_LOC(data_out_r15) - CALL h5dread_f(dset_idr8, h5kind_to_type(real_kind_15,H5_REAL_KIND), f_ptr, error) - CALL check("h5dread_f",error, total_error) - - DO i = 1, 4 - - CALL verify_Fortran_INTEGER_4("h5kind_to_type1",INT(dset_data_i1(i),int_kind_8),INT(data_out_i1(i),int_kind_8),total_error) - CALL verify_Fortran_INTEGER_4("h5kind_to_type2",INT(dset_data_i4(i),int_kind_8),INT(data_out_i4(i),int_kind_8),total_error) - CALL verify_Fortran_INTEGER_4("h5kind_to_type3",INT(dset_data_i8(i),int_kind_8),INT(data_out_i8(i),int_kind_8),total_error) - CALL verify_Fortran_INTEGER_4("h5kind_to_type4",INT(dset_data_i16(i),int_kind_8),INT(data_out_i16(i),int_kind_8),total_error) - - CALL verify_real_kind_7("h5kind_to_type5",REAL(dset_data_r(i),real_kind_7),REAL(data_out_r(i),real_kind_7),total_error) - CALL verify_real_kind_7("h5kind_to_type6",REAL(dset_data_r7(i),real_kind_7),REAL(data_out_r7(i),real_kind_7),total_error) - CALL verify_real_kind_7("h5kind_to_type7",REAL(dset_data_r15(i),real_kind_7),REAL(data_out_r15(i),real_kind_7),total_error) - - END DO - - ! - ! Close the dataset. - ! - CALL h5dclose_f(dset_id1, error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset_id4, error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset_id8, error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset_id16, error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset_idr4, error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset_idr8, error) - CALL check("h5dclose_f",error, total_error) - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE test_h5kind_to_type - -!************************************************************ -! -! This test reads and writes array datatypes -! to a dataset. The test first writes integers arrays of -! dimension ADIM0xADIM1 to a dataset with a dataspace of -! DIM0, then closes the file. Next, it reopens the file, -! reads back the data. -! -!************************************************************ -SUBROUTINE t_array(total_error) - - USE ISO_C_BINDING - USE HDF5 - USE TH5_MISC - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=19), PARAMETER :: filename = "t_array_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 4 - INTEGER , PARAMETER :: adim0 = 3 - INTEGER , PARAMETER :: adim1 = 5 - INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: adims = (/adim0, adim1/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER, DIMENSION(1:dim0, 1:adim0, 1:adim1), TARGET :: wdata ! Write buffer - INTEGER, DIMENSION(:,:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer - INTEGER :: i, j, k - TYPE(C_PTR) :: f_ptr - INTEGER :: error ! Error flag - - ! - ! Initialize data. i is the element in the dataspace, j and k the - ! elements within the array datatype. - ! - DO i = 1, dim0 - DO j = 1, adim0 - DO k = 1, adim1 - wdata(i,j,k) = (i-1)*(j-1)-(j-1)*(k-1)+(i-1)*(k-1) - ENDDO - ENDDO - ENDDO - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, error) - ! - ! Create array datatypes for file and memory. - ! - CALL H5Tarray_create_f(INT(H5T_STD_I64LE, HID_T), 2, adims, filetype, error) - CALL check("H5Tarray_create_f",error, total_error) - CALL H5Tarray_create_f(H5T_NATIVE_INTEGER, 2, adims, memtype, error) - CALL check("H5Tarray_create_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the array data to it. - ! - CALL h5dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata) - CALL h5dwrite_f(dset, memtype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! Open file, dataset, and attribute. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get the datatype and its dimensions. - ! - CALL h5dget_type_f(dset, filetype, error) - CALL check("h5dget_type_f",error, error) - CALL H5Tget_array_dims_f(filetype, adims, error) - CALL check("h5dget_type_f",error, total_error) - CALL VERIFY("H5Tget_array_dims_f", INT(adims(1)), adim0, total_error) - CALL VERIFY("H5Tget_array_dims_f", INT(adims(2)), adim1, total_error) - ! - ! Get dataspace and allocate memory for read buffer. This is a - ! three dimensional attribute when the array datatype is included. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - - ALLOCATE(rdata(1:dims(1),1:adims(1),1:adims(2))) - ! - ! Create the memory datatype. - ! - CALL H5Tarray_create_f(H5T_NATIVE_INTEGER, 2, adims, memtype, error) - CALL check("H5Tarray_create_f",error, total_error) - ! - ! Read the data. - ! - - f_ptr = C_LOC(rdata) - CALL H5Dread_f(dset, memtype, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - ! - ! Output the data to the screen. - ! - i_loop: DO i = 1, INT(dims(1)) - DO j=1, INT(adim0) - DO k = 1, INT(adim1) - CALL VERIFY("H5Sget_simple_extent_dims_f", rdata(i,j,k), wdata(i,j,k), total_error) - IF(total_error.NE.0) EXIT i_loop - ENDDO - ENDDO - ENDDO i_loop - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_array - -SUBROUTINE t_enum(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=19), PARAMETER :: filename = "t_enum_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 4 - INTEGER , PARAMETER :: dim1 = 7 - INTEGER(HID_T) :: F_BASET ! File base type - INTEGER(HID_T) :: M_BASET ! Memory base type - INTEGER(SIZE_T) , PARAMETER :: NAME_BUF_SIZE = 16 - -! Enumerated type - INTEGER, PARAMETER :: SOLID=0, LIQUID=1, GAS=2, PLASMA=3 - - INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles - - INTEGER(hsize_t), DIMENSION(1:2) :: dims = (/dim0, dim1/) - INTEGER, DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer - INTEGER, DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer - INTEGER, DIMENSION(1:1), TARGET :: val - - CHARACTER(LEN=6), DIMENSION(1:4) :: & - names = (/"SOLID ", "LIQUID", "GAS ", "PLASMA"/) - CHARACTER(LEN=NAME_BUF_SIZE) :: name - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER :: i, j, idx - TYPE(C_PTR) :: f_ptr - INTEGER :: error ! Error flag - ! - ! Initialize DATA. - ! - F_BASET = H5T_STD_I16BE ! File base type - M_BASET = H5T_NATIVE_INTEGER ! Memory base type - DO i = 1, dim0 - DO j = 1, dim1 - wdata(i,j) = MOD( (j-1)*(i-1), PLASMA+1) - ENDDO - ENDDO - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create the enumerated datatypes for file and memory. This - ! process is simplified IF native types are used for the file, - ! as only one type must be defined. - ! - CALL h5tenum_create_f(F_BASET, filetype, error) - CALL check("h5tenum_create_f",error, total_error) - - CALL h5tenum_create_f(M_BASET, memtype, error) - CALL check("h5tenum_create_f",error, total_error) - - DO i = SOLID, PLASMA - ! - ! Insert enumerated value for memtype. - ! - val(1) = i - CALL H5Tenum_insert_f(memtype, TRIM(names(i+1)), C_LOC(val(1)), error) - CALL check("H5Tenum_insert_f", error, total_error) - ! - ! Insert enumerated value for filetype. We must first convert - ! the numerical value val to the base type of the destination. - ! - f_ptr = C_LOC(val(1)) - CALL H5Tconvert_f(M_BASET, F_BASET, INT(1,SIZE_T), f_ptr, error) - CALL check("H5Tconvert_f",error, total_error) - IF(i.GE.1)THEN ! test both F90 and F03 APIs - CALL H5Tenum_insert_f(filetype, TRIM(names(i+1)), f_ptr, error) - ELSE - CALL H5Tenum_insert_f(filetype, TRIM(names(i+1)), val(1), error) - ENDIF - CALL check("H5Tenum_insert_f",error, total_error) - ENDDO - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(2, dims, space, total_error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the enumerated data to it. - ! - CALL h5dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata(1,1)) - CALL h5dwrite_f(dset, memtype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL h5tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - - ! - ! Now we begin the read section of this example. - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f (file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL h5dget_space_f(dset,space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(2)), dim1, total_error) - - ALLOCATE(rdata(1:dims(1),1:dims(2))) - - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1,1)) - CALL h5dread_f(dset, memtype, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - - ! - ! Output the data to the screen. - ! - i_loop: DO i = 1, INT(dims(1)) - DO j = 1, INT(dims(2)) - ! - ! Get the name of the enumeration member. - ! - CALL h5tenum_nameof_f( memtype, rdata(i,j), NAME_BUF_SIZE, name, error) - CALL check("h5tenum_nameof_f",error, total_error) - idx = MOD( (j-1)*(i-1), PLASMA+1 ) + 1 - CALL verifystring("h5tenum_nameof_f",TRIM(name),TRIM(names(idx)), total_error) - IF(total_error.NE.0) EXIT i_loop - ENDDO - ENDDO i_loop - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL h5tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_enum - -SUBROUTINE t_bit(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=20), PARAMETER :: filename = "t_bit_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 4 - INTEGER , PARAMETER :: dim1 = 7 - - INTEGER(HID_T) :: file, space, dset ! Handles - INTEGER(HSIZE_T), DIMENSION(1:2) :: dims = (/dim0, dim1/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER(C_SIGNED_CHAR), DIMENSION(1:dim0, 1:dim1), TARGET :: wdata ! Write buffer - INTEGER(C_SIGNED_CHAR), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata ! Read buffer - INTEGER :: A, B, C, D - INTEGER :: Aw, Bw, Cw, Dw - INTEGER :: i, j - INTEGER, PARAMETER :: hex = Z'00000003' - TYPE(C_PTR) :: f_ptr - INTEGER :: error ! Error flag - ! - ! Initialize data. We will manually pack 4 2-bit integers into - ! each unsigned char data element. - ! - DO i = 0, dim0-1 - DO j = 0, dim1-1 - wdata(i+1,j+1) = 0 - wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(IAND(i * j - j, hex),C_SIGNED_CHAR) ) ! Field "A" - wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(i,hex),2),C_SIGNED_CHAR) ) ! Field "B" - wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(j,hex),4),C_SIGNED_CHAR) ) ! Field "C" - wdata(i+1,j+1) = IOR( wdata(i+1,j+1), INT(ISHFT(IAND(i+j,hex),6),C_SIGNED_CHAR) ) ! Field "D" - ENDDO - ENDDO - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(2, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the bitfield data to it. - ! - CALL H5Dcreate_f(file, dataset, H5T_STD_B8BE, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata(1,1)) - CALL H5Dwrite_f(dset, H5T_NATIVE_B8, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! Open file, dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(2)), dim1, total_error) - ALLOCATE(rdata(1:dims(1),1:dims(2))) - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata) - CALL H5Dread_f(dset, H5T_NATIVE_B8, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - ! - ! Output the data to the screen. - ! - i_loop: DO i = 1, INT(dims(1)) - DO j = 1, INT(dims(2)) - A = IAND(rdata(i,j), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "A" - B = IAND(ISHFT(rdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "B" - C = IAND(ISHFT(rdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "C" - D = IAND(ISHFT(rdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) ! Retrieve field "D" - - Aw = IAND(wdata(i,j), INT(hex,C_SIGNED_CHAR)) - Bw = IAND(ISHFT(wdata(i,j),-2), INT(hex,C_SIGNED_CHAR)) - Cw = IAND(ISHFT(wdata(i,j),-4), INT(hex,C_SIGNED_CHAR)) - Dw = IAND(ISHFT(wdata(i,j),-6), INT(hex,C_SIGNED_CHAR)) - - CALL VERIFY("bitfield", A, Aw, total_error) - CALL VERIFY("bitfield", B, Bw, total_error) - CALL VERIFY("bitfield", C, Cw, total_error) - CALL VERIFY("bitfield", D, Dw, total_error) - IF(total_error.NE.0) EXIT i_loop - ENDDO - ENDDO i_loop - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_bit - -SUBROUTINE t_opaque(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - CHARACTER(LEN=20), PARAMETER :: filename = "t_opaque_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 4 - INTEGER(SIZE_T) , PARAMETER :: size = 7 - INTEGER(HID_T) :: file, space, dtype, dset ! Handles - INTEGER(size_t) :: len - INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/DIM0/) - - CHARACTER(LEN=size), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer - CHARACTER(LEN=size), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer - CHARACTER(LEN=size-1) :: str = "OPAQUE" - - CHARACTER(LEN=14) :: tag_sm ! Test reading obaque tag into - CHARACTER(LEN=15) :: tag_exact ! buffers that are: to small, exact - CHARACTER(LEN=17) :: tag_big ! and to big. - - INTEGER :: taglen - INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims - INTEGER(hsize_t) :: i - CHARACTER(LEN=1) :: ichr - TYPE(C_PTR) :: f_ptr - INTEGER :: error - ! - ! Initialize data. - ! - DO i = 1, dim0 - WRITE(ichr,'(I1)') i-1 - wdata(i) = str//ichr - ENDDO - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create opaque datatype and set the tag to something appropriate. - ! For this example we will write and view the data as a character - ! array. - ! - CALL h5tcreate_f(h5T_OPAQUE_F, size, dtype, error) - CALL check("h5tcreate_f",error, total_error) - CALL h5tset_tag_f(dtype,"Character array",error) - CALL check("h5tset_tag_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the opaque data to it. - ! - CALL h5dcreate_f(file, dataset, dtype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata(1)(1:1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(dtype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get datatype and properties for the datatype. - ! - CALL h5dget_type_f(dset, dtype, error) - CALL check("h5dget_type_f",error, total_error) - CALL h5tget_size_f(dtype, len, error) - CALL check("h5tget_size_f",error, total_error) - - ! Next tests should return - ! opaque_tag = tag = "Character array" and the actual length = 15 - - ! Test reading into a string that is to small - CALL h5tget_tag_f(dtype, tag_sm, taglen, error) - CALL check("h5tget_tag_f",error, total_error) - CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) - CALL verifystring("h5tget_tag_f",tag_sm,"Character arra", total_error) - - ! Test reading into a string that is exact - CALL h5tget_tag_f(dtype, tag_exact, taglen, error) - CALL check("h5tget_tag_f",error, total_error) - CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) - CALL verifystring("h5tget_tag_f",tag_exact,"Character array", total_error) - - ! Test reading into a string that is to big - CALL h5tget_tag_f(dtype, tag_big, taglen, error) - CALL check("h5tget_tag_f",error, total_error) - CALL VERIFY("h5tget_tag_f", taglen, 15, total_error) - CALL verifystring("h5tget_tag_f",tag_big,"Character array ", total_error) - - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL h5dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - ALLOCATE(rdata(1:dims(1))) - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1)(1:1)) - CALL h5dread_f(dset, dtype, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - ! - DO i = 1, dims(1) - CALL verifystring("t_opaque",TRIM(rdata(i)),TRIM(wdata(i)), total_error) - ENDDO - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(dtype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_opaque - -SUBROUTINE t_objref(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - CHARACTER(LEN=20), PARAMETER :: filename = "t_objref_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 2 - - INTEGER(HID_T) :: file, space, dset, obj ! Handles - INTEGER :: error - - INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/dim0/) - TYPE(hobj_ref_t_f), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer - TYPE(hobj_ref_t_f), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer - INTEGER :: objtype - INTEGER(SIZE_T) :: name_size - CHARACTER(LEN=80) :: name - INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims - INTEGER :: i - TYPE(C_PTR) :: f_ptr - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create a dataset with a null dataspace. - ! - CALL h5screate_f(H5S_NULL_F,space,error) - CALL check("h5screate_f",error, total_error) - CALL h5dcreate_f(file, "DS2", H5T_STD_I32LE, space, obj, error) - CALL check("h5dcreate_f",error, total_error) - ! - CALL h5dclose_f(obj , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - ! - ! Create a group. - ! - CALL h5gcreate_f(file, "G1", obj, error) - CALL check("h5gcreate_f",error, total_error) - CALL h5gclose_f(obj, error) - CALL check("h5gclose_f",error, total_error) - ! - ! Create references to the previously created objects. note, space_id - ! is not needed for object references. - ! - f_ptr = C_LOC(wdata(1)) - CALL H5Rcreate_f(file, "G1", H5R_OBJECT_F, f_ptr, error) - CALL check("H5Rcreate_f",error, total_error) - f_ptr = C_LOC(wdata(2)) - CALL H5Rcreate_f(file, "DS2", H5R_OBJECT_F, f_ptr, error) - CALL check("H5Rcreate_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the object references to it. - ! - CALL h5dcreate_f(file, dataset, H5T_STD_REF_OBJ, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - f_ptr = C_LOC(wdata(1)) - CALL h5dwrite_f(dset, H5T_STD_REF_OBJ, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL h5dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - - ALLOCATE(rdata(1:maxdims(1))) - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1)) - CALL h5dread_f( dset, H5T_STD_REF_OBJ, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - ! - ! Output the data to the screen. - ! - DO i = 1, INT(maxdims(1)) - ! - ! Open the referenced object, get its name and type. - ! - f_ptr = C_LOC(rdata(i)) - CALL H5Rdereference_f(dset, H5R_OBJECT_F, f_ptr, obj, error) - CALL check("H5Rdereference_f",error, total_error) - CALL H5Rget_obj_type_f(dset, H5R_OBJECT_F, f_ptr, objtype, error) - CALL check("H5Rget_obj_type_f",error, total_error) - ! - ! Get the length of the name and name - ! - name(:) = ' ' ! initialize string to blanks - CALL H5Iget_name_f(obj, name, 80_size_t, name_size, error) - CALL check("H5Iget_name_f",error, total_error) - ! - ! Print the object type and close the object. - ! - IF(objtype.EQ.H5G_GROUP_F)THEN - CALL verifystring("t_objref", name(1:name_size),"/G1", total_error) - ELSE IF(objtype.EQ.H5G_DATASET_F)THEN - CALL verifystring("t_objref", name(1:name_size),"/DS2", total_error) - ELSE - total_error = total_error + 1 - ENDIF - CALL h5oclose_f(obj, error) - CALL check("h5oclose_f",error, total_error) - - END DO - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_objref - - -SUBROUTINE t_regref(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - CHARACTER(LEN=22), PARAMETER :: filename = "t_regref_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - CHARACTER(LEN=3) , PARAMETER :: dataset2 = "DS2" - INTEGER , PARAMETER :: dim0 = 2 - INTEGER , PARAMETER :: ds2dim0 = 16 - INTEGER , PARAMETER :: ds2dim1 = 3 - - INTEGER(HID_T) :: file, memspace, space, dset, dset2 ! Handles - INTEGER :: error - - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims3 - INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2 = (/ds2dim0,ds2dim1/) - - INTEGER(HSIZE_T), DIMENSION(1:2,1:4) :: coords = RESHAPE((/2,1,12,3,1,2,5,3/),(/2,4/)) - - INTEGER(HSIZE_T), DIMENSION(1:2) :: start=(/0,0/),stride=(/11,2/),count=(/2,2/), BLOCK=(/3,1/) - - INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims - INTEGER(hssize_t) :: npoints - TYPE(hdset_reg_ref_t_f03), DIMENSION(1:dim0), TARGET :: wdata ! Write buffer - TYPE(hdset_reg_ref_t_f03), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer - - INTEGER(size_t) :: size - CHARACTER(LEN=1), DIMENSION(1:ds2dim0,1:ds2dim1), TARGET :: wdata2 - - CHARACTER(LEN=80),DIMENSION(1:1), TARGET :: rdata2 - CHARACTER(LEN=80) :: name - INTEGER(hsize_t) :: i - TYPE(C_PTR) :: f_ptr - CHARACTER(LEN=ds2dim0) :: chrvar - CHARACTER(LEN=20), DIMENSION(1:2) :: chrref_correct - - chrvar = "The quick brown " - READ(chrvar,'(16A1)') wdata2(1:16,1) - chrvar = "fox jumps over " - READ(chrvar,'(16A1)') wdata2(1:16,2) - chrvar = "the 5 lazy dogs " - READ(chrvar,'(16A1)') wdata2(1:16,3) - - chrref_correct(1) = 'hdf5' - chrref_correct(2) = 'Therowthedog' - - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create a dataset with character data. - ! - CALL h5screate_simple_f(2, dims2, space, error) - CALL check("h5screate_simple_f",error, total_error) - CALL h5dcreate_f(file,dataset2, H5T_STD_I8LE, space, dset2, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata2(1,1)) - CALL h5dwrite_f(dset2, H5T_NATIVE_INTEGER_1, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Create reference to a list of elements in dset2. - ! - CALL h5sselect_elements_f(space, H5S_SELECT_SET_F, 2, INT(4,size_t), coords, error) - CALL check("h5sselect_elements_f",error, total_error) - f_ptr = C_LOC(wdata(1)) - CALL h5rcreate_f(file, DATASET2, H5R_DATASET_REGION_F, f_ptr, error, space) - CALL check("h5rcreate_f",error, total_error) - ! - ! Create reference to a hyperslab in dset2, close dataspace. - ! - CALL h5sselect_hyperslab_f (space, H5S_SELECT_SET_F, start, count, error, stride, block) - CALL check("h5sselect_hyperslab_f",error, total_error) - f_ptr = C_LOC(wdata(2)) - CALL h5rcreate_f(file, DATASET2, H5R_DATASET_REGION_F, f_ptr, error, space) - CALL check("h5rcreate_f",error, total_error) - - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to the current size. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - - ! - ! Create the dataset and write the region references to it. - ! - CALL h5dcreate_f(file, dataset, H5T_STD_REF_DSETREG, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - f_ptr = C_LOC(wdata(1)) - CALL h5dwrite_f(dset, H5T_STD_REF_DSETREG, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5dclose_f(dset2, error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL h5dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL h5sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - ALLOCATE(rdata(1:dims(1))) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1)) - CALL h5dread_f( dset, H5T_STD_REF_DSETREG, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - ! - ! Output the data to the screen. - ! - DO i = 1, dims(1) - - ! - ! Open the referenced object, retrieve its region as a - ! dataspace selection. - ! - f_ptr = C_LOC(rdata(i)) - CALL H5Rdereference_f(dset, H5R_DATASET_REGION_F, f_ptr, dset2, error) - CALL check("H5Rdereference_f",error, total_error) - - CALL H5Rget_region_f(dset, f_ptr, space, error) - CALL check("H5Rget_region_f",error, total_error) - - ! - ! Get the object's name - ! - name(:) = ' ' ! initialize string to blanks - CALL H5Iget_name_f(dset2, name, 80_size_t, size, error) - CALL check("H5Iget_name_f",error, total_error) - CALL VERIFY("H5Iget_name_f", INT(size), LEN_TRIM(name), total_error) - CALL verifystring("H5Iget_name_f",name(1:size),TRIM(name), total_error) - ! - ! Allocate space for the read buffer. - ! - CALL H5Sget_select_npoints_f(space, npoints, error) - CALL check("H5Sget_select_npoints_f",error, total_error) - CALL VERIFY("H5Sget_select_npoints_f", INT(npoints), LEN_TRIM(chrref_correct(i)), total_error) - - dims3(1) = npoints - ! - ! Read the dataset region. - ! - CALL h5screate_simple_f(1, dims3, memspace, error) - CALL check("h5screate_simple_f",error, total_error) - - f_ptr = C_LOC(rdata2(1)(1:1)) - CALL h5dread_f( dset2, H5T_NATIVE_INTEGER_1, f_ptr, error, memspace, space) - CALL check("H5Dread_f",error, total_error) - CALL verifystring("h5dread_f",rdata2(1)(1:npoints),TRIM(chrref_correct(i)), total_error) - - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Sclose_f(memspace, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Dclose_f(dset2, error) - CALL check("h5dclose_f",error, total_error) - - END DO - ! - ! Close and release resources. - ! - DEALLOCATE(rdata) - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_regref - -SUBROUTINE t_vlen(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - CHARACTER(LEN=18), PARAMETER :: filename = "t_vlen_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER, PARAMETER :: LEN0 = 3 - INTEGER, PARAMETER :: LEN1 = 12 - INTEGER(hsize_t) :: dim0 - - INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles - INTEGER :: error - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - INTEGER :: i, j - - ! vl data - TYPE vl - INTEGER, DIMENSION(:), POINTER :: DATA - END TYPE vl - TYPE(vl), DIMENSION(:), ALLOCATABLE, TARGET :: ptr - - - TYPE(hvl_t), DIMENSION(1:2), TARGET :: wdata ! Array of vlen structures - TYPE(hvl_t), DIMENSION(1:2), TARGET :: rdata ! Pointer to vlen structures - - INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/2/) - INTEGER, DIMENSION(:), POINTER :: ptr_r - TYPE(C_PTR) :: f_ptr - - ! - ! Initialize variable-length data. wdata(1) is a countdown of - ! length LEN0, wdata(2) is a Fibonacci sequence of length LEN1. - ! - wdata(1)%len = LEN0 - wdata(2)%len = LEN1 - - ALLOCATE( ptr(1:2) ) - ALLOCATE( ptr(1)%data(1:wdata(1)%len) ) - ALLOCATE( ptr(2)%data(1:wdata(2)%len) ) - - DO i=1, wdata(1)%len - ptr(1)%data(i) = wdata(1)%len - i + 1 ! 3 2 1 - ENDDO - wdata(1)%p = C_LOC(ptr(1)%data(1)) - - ptr(2)%data(1:2) = 1 - DO i = 3, wdata(2)%len - ptr(2)%data(i) = ptr(2)%data(i-1) + ptr(2)%data(i-2) ! (1 1 2 3 5 8 etc.) - ENDDO - wdata(2)%p = C_LOC(ptr(2)%data(1)) - - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create variable-length datatype for file and memory. - ! - CALL H5Tvlen_create_f(H5T_STD_I32LE, filetype, error) - CALL check("H5Tvlen_create_f",error, total_error) - CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) - CALL check("H5Tvlen_create_f",error, total_error) - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the variable-length data to it. - ! - CALL H5Dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - f_ptr = C_LOC(wdata(1)) - CALL h5dwrite_f(dset, memtype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - ! - ! Close and release resources. Note the use of H5Dvlen_reclaim - ! removes the need to manually deallocate the previously allocated - ! data. - ! - - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - - ! - ! Now we begin the read section of this example. - - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - - ! - ! Get dataspace and allocate memory for array of vlen structures. - ! This does not actually allocate memory for the vlen data, that - ! will be done by the library. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - dim0 = dims(1) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) - - ! - ! Create the memory datatype. - ! - CALL H5Tvlen_create_f(H5T_NATIVE_INTEGER, memtype, error) - CALL check("H5Tvlen_create_f",error, total_error) - - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1)) - CALL H5Dread_f(dset, memtype, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - - DO i = 1, INT(dims(1)) - CALL c_f_pointer(rdata(i)%p, ptr_r, [rdata(i)%len] ) - DO j = 1, rdata(i)%len - CALL VERIFY("t_vlen", ptr_r(j), ptr(i)%data(j), total_error) - ENDDO - ENDDO - ! - ! Close and release resources. - ! - DEALLOCATE(ptr) - CALL h5dvlen_reclaim_f(memtype, space, H5P_DEFAULT_F, f_ptr, error) - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_vlen - - -SUBROUTINE t_vlstring(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=18), PARAMETER :: filename = "t_vlstring.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - - INTEGER(SIZE_T), PARAMETER :: dim0 = 4 - INTEGER(SIZE_T), PARAMETER :: sdim = 7 - INTEGER(HID_T) :: file, filetype, space, dset ! Handles - INTEGER :: error - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - - CHARACTER(LEN=sdim), DIMENSION(1:dim0), TARGET :: & - wdata = (/"Parting", "is such", "sweet ", "sorrow."/) ! Write buffer - CHARACTER(LEN=sdim), DIMENSION(:), ALLOCATABLE :: rdata ! Read buffer - INTEGER(HSIZE_T), DIMENSION(2) :: data_dims = (/sdim,dim0/) - INTEGER(SIZE_T), DIMENSION(4) :: str_len = (/7,7,5,7/) - INTEGER(hsize_t) :: i - - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create file and memory datatypes. For this example we will save - ! the strings as C variable length strings, H5T_STRING is defined - ! as a variable length string. - ! - CALL H5Tcopy_f(H5T_STRING, filetype, error) - CALL check("H5Tcopy_f",error, total_error) - CALL H5Tset_strpad_f(filetype, H5T_STR_NULLPAD_F, error) - CALL check("H5Tset_strpad_f",error, total_error) - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the variable-length string data to - ! it. - ! - CALL h5dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - CALL h5dwrite_vl_f(dset, filetype, wdata, data_dims, str_len, error, space) - CALL check("h5dwrite_vl_f",error, total_error) - - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - - ! - ! Now we begin the read section of this example. - ! - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get the datatype. - ! - CALL H5Dget_type_f(dset, filetype, error) - CALL check("H5Dget_type_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), INT(dim0), total_error) - - ALLOCATE(rdata(1:dims(1))) - - ! - ! Read the data. - ! - CALL h5dread_vl_f(dset, filetype, rdata, data_dims, str_len, error, space) - CALL check("H5Dread_vl_f",error, total_error) - - ! - ! Output the data to the screen. - ! - DO i = 1, dims(1) - CALL verifystring("h5dopen_f",TRIM(rdata(i)),TRIM(wdata(i)) , total_error) - END DO - - DEALLOCATE(rdata) - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_vlstring - -SUBROUTINE t_vlstring_readwrite(total_error) - -! test writing and reading vl string using h5dread_f and h5dwrite_f, C_LOC and C_F_POINTER - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=19), PARAMETER :: filename = "t_vlstringrw_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - CHARACTER(LEN=3) , PARAMETER :: dataset2D = "DS2" - - INTEGER(HSIZE_T) , PARAMETER :: dim0 = 4 - INTEGER(HSIZE_T) , PARAMETER :: dim1 = 2 - INTEGER(HID_T) :: file, filetype, space, dset ! Handles - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: dims2D = (/dim1,dim0/) - INTEGER(HSIZE_T), DIMENSION(1:2) :: maxdims - - TYPE(C_PTR), DIMENSION(1:dim0), TARGET :: wdata - CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A = "123456"//C_NULL_CHAR - CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: B = "7890"//C_NULL_CHAR - CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: C = "abc"//C_NULL_CHAR - CHARACTER(len=3, KIND=c_char), DIMENSION(1:1), TARGET :: D = "df"//C_NULL_CHAR - - TYPE(C_PTR), DIMENSION(1:dim1,1:dim0), TARGET :: wdata2D - - CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A11 = "A(1,1)"//C_NULL_CHAR - CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: A12 = "A12"//C_NULL_CHAR - CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: A13 = "A_13"//C_NULL_CHAR - CHARACTER(len=8, KIND=c_char), DIMENSION(1:1), TARGET :: A14 = "A_{1,4}"//C_NULL_CHAR - CHARACTER(len=8, KIND=c_char), DIMENSION(1:1), TARGET :: A21 = "A_{2,1}"//C_NULL_CHAR - CHARACTER(len=5, KIND=c_char), DIMENSION(1:1), TARGET :: A22 = "A_22"//C_NULL_CHAR - CHARACTER(len=4, KIND=c_char), DIMENSION(1:1), TARGET :: A23 = "A23"//C_NULL_CHAR - CHARACTER(len=7, KIND=c_char), DIMENSION(1:1), TARGET :: A24 = "A(2,4)"//C_NULL_CHAR - - TYPE(C_PTR), DIMENSION(:), ALLOCATABLE, TARGET :: rdata ! Read buffer - TYPE(C_PTR), DIMENSION(:,:), ALLOCATABLE, TARGET :: rdata2D ! Read 2D buffer - CHARACTER(len=8, kind=c_char), POINTER :: data ! A pointer to a Fortran string - CHARACTER(len=8, kind=c_char), DIMENSION(1:4) :: data_w ! A pointer to a Fortran string - CHARACTER(len=8, kind=c_char), DIMENSION(1:dim1,1:dim0) :: data2D_w ! A pointer to a Fortran string - TYPE(C_PTR) :: f_ptr - INTEGER(hsize_t) :: i, j - INTEGER :: len - INTEGER :: error - - ! Initialize array of C pointers - - wdata(1) = C_LOC(A(1)(1:1)) - wdata(2) = C_LOC(B(1)(1:1)) - wdata(3) = C_LOC(C(1)(1:1)) - wdata(4) = C_LOC(D(1)(1:1)) - - data_w(1) = A(1) - data_w(2) = B(1) - data_w(3) = C(1) - data_w(4) = D(1) - - wdata2D(1,1) = C_LOC(A11(1)(1:1)) - wdata2D(1,2) = C_LOC(A12(1)(1:1)) - wdata2D(1,3) = C_LOC(A13(1)(1:1)) - wdata2D(1,4) = C_LOC(A14(1)(1:1)) - wdata2D(2,1) = C_LOC(A21(1)(1:1)) - wdata2D(2,2) = C_LOC(A22(1)(1:1)) - wdata2D(2,3) = C_LOC(A23(1)(1:1)) - wdata2D(2,4) = C_LOC(A24(1)(1:1)) - - data2D_w(1,1) = A11(1) - data2D_w(1,2) = A12(1) - data2D_w(1,3) = A13(1) - data2D_w(1,4) = A14(1) - data2D_w(2,1) = A21(1) - data2D_w(2,2) = A22(1) - data2D_w(2,3) = A23(1) - data2D_w(2,4) = A24(1) - - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create file and memory datatypes. For this test we will save - ! the strings as C variable length strings, H5T_STRING is defined - ! as a variable length string. - ! - CALL H5Tcopy_f(H5T_STRING, filetype, error) - CALL check("H5Tcopy_f",error, total_error) - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the variable-length string data to - ! it. - ! - CALL h5dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - f_ptr = C_LOC(wdata(1)) - CALL h5dwrite_f(dset, filetype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(2, dims2D, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the variable-length string data to - ! it. - ! - CALL h5dcreate_f(file, dataset2D, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - f_ptr = C_LOC(wdata2D(1,1)) - CALL h5dwrite_f(dset, filetype, f_ptr, error) - CALL check("h5dwrite_f",error, total_error) - - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - - ! - ! Now we begin the read section of this test. - ! - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get the datatype. - ! - CALL H5Dget_type_f(dset, filetype, error) - CALL check("H5Dget_type_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - ALLOCATE(rdata(1:dims(1))) - ! - ! Read the data. - ! - - f_ptr = C_LOC(rdata(1)) - CALL h5dread_f(dset, H5T_STRING, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - - ! - ! Check the data. - ! - DO i = 1, dims(1) - CALL C_F_POINTER(rdata(i), data) - len = 0 - DO - IF(DATA(len+1:len+1).EQ.C_NULL_CHAR.OR.len.GE.8) EXIT - len = len + 1 - ENDDO - CALL verifystring("h5dread_f",data(1:len), data_w(i)(1:len), total_error) - END DO - - DEALLOCATE(rdata) - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - ! - ! Test reading in 2D dataset - ! - CALL h5dopen_f(file, dataset2D, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get the datatype. - ! - CALL H5Dget_type_f(dset, filetype, error) - CALL check("H5Dget_type_f",error, total_error) - ! - ! Get dataspace and allocate memory for read buffer. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - - - CALL H5Sget_simple_extent_dims_f(space, dims2D, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - ALLOCATE(rdata2D(1:dims2D(1),1:dims2D(2))) - - ! - ! Read the data. - ! - - f_ptr = C_LOC(rdata2D(1,1)) - CALL h5dread_f(dset, H5T_STRING, f_ptr, error) - CALL check("H5Dread_f",error, total_error) - - ! - ! Check the data. - ! - DO i = 1, dims2D(1) - DO j = 1, dims2D(2) - CALL C_F_POINTER(rdata2D(i,j), DATA) - len = 0 - DO - IF(DATA(len+1:len+1).EQ.C_NULL_CHAR.OR.len.GE.8) EXIT - len = len + 1 - ENDDO - CALL verifystring("h5dread_f",DATA(1:len), data2D_w(i,j)(1:len), total_error) - ENDDO - END DO - - DEALLOCATE(rdata2D) - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - -END SUBROUTINE t_vlstring_readwrite - - -SUBROUTINE t_string(total_error) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - CHARACTER(LEN=20), PARAMETER :: filename = "t_string_F03.h5" - CHARACTER(LEN=3) , PARAMETER :: dataset = "DS1" - INTEGER , PARAMETER :: dim0 = 4 - INTEGER(SIZE_T) , PARAMETER :: sdim = 8 - - INTEGER(HID_T) :: file, filetype, memtype, space, dset ! Handles - INTEGER :: error - - INTEGER(HSIZE_T), DIMENSION(1:1) :: dims = (/dim0/) - INTEGER(HSIZE_T), DIMENSION(1:1) :: maxdims - - CHARACTER(LEN=sdim), DIMENSION(1:dim0), TARGET :: & - wdata = (/"Parting", "is such", "sweet ", "sorrow."/) - CHARACTER(LEN=sdim), DIMENSION(:), ALLOCATABLE, TARGET :: rdata - INTEGER(hsize_t) :: i - INTEGER(SIZE_T) :: size - TYPE(C_PTR) :: f_ptr - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - ! - ! Create file datatypes. For this example we will save - ! the strings as FORTRAN strings - ! - CALL H5Tcopy_f(H5T_FORTRAN_S1, filetype, error) - CALL check("H5Tcopy_f",error, total_error) - CALL H5Tset_size_f(filetype, sdim, error) - CALL check("H5Tset_size_f",error, total_error) - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(1, dims, space, error) - CALL check("h5screate_simple_f",error, total_error) - ! - ! Create the dataset and write the string data to it. - ! - CALL h5dcreate_f(file, dataset, filetype, space, dset, error) - CALL check("h5dcreate_f",error, total_error) - - f_ptr = C_LOC(wdata(1)(1:1)) - CALL H5Dwrite_f(dset, filetype, f_ptr, error) - CALL check("H5Dwrite_f",error, total_error) - ! - ! Close and release resources. - ! - CALL h5dclose_f(dset , error) - CALL check("h5dclose_f",error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(filetype, error) - CALL check("h5tclose_f",error, total_error) - CALL h5fclose_f(file , error) - CALL check("h5fclose_f",error, total_error) - ! - ! Now we begin the read section of this example. - ! - ! Open file and dataset. - ! - CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file, error) - CALL check("h5fopen_f",error, total_error) - CALL h5dopen_f(file, dataset, dset, error) - CALL check("h5dopen_f",error, total_error) - ! - ! Get the datatype and its size. - ! - CALL H5Dget_type_f(dset, filetype, error) - CALL check("H5Dget_type_f",error, total_error) - CALL H5Tget_size_f(filetype, size, error) - CALL check("H5Tget_size_f",error, total_error) - CALL VERIFY("H5Tget_size_f", INT(size), INT(sdim), total_error) - ! - ! Get dataspace. - ! - CALL H5Dget_space_f(dset, space, error) - CALL check("H5Dget_space_f",error, total_error) - CALL H5Sget_simple_extent_dims_f(space, dims, maxdims, error) - CALL check("H5Sget_simple_extent_dims_f",error, total_error) - CALL VERIFY("H5Sget_simple_extent_dims_f", INT(dims(1)), dim0, total_error) - - ALLOCATE(rdata(1:dims(1))) - ! - ! Create the memory datatype. - ! - CALL H5Tcopy_f(H5T_FORTRAN_S1, memtype, error) - CALL check("H5Tcopy_f",error, total_error) - CALL H5Tset_size_f(memtype, sdim, error) - CALL check("H5Tset_size_f",error, total_error) - ! - ! Read the data. - ! - f_ptr = C_LOC(rdata(1)(1:1)) - CALL H5Dread_f(dset, memtype, f_ptr, error, space) - CALL check("H5Dread_f",error, total_error) - - DO i = 1, dims(1) - CALL verifystring("h5dread_f",TRIM(rdata(i)),TRIM(wdata(i)) , total_error) - END DO - - DEALLOCATE(rdata) - - ! - ! Close and release resources. - ! - CALL H5Dclose_f(dset, error) - CALL check("h5dclose_f",error, total_error) - CALL H5Sclose_f(space, error) - CALL check("h5sclose_f",error, total_error) - CALL H5Tclose_f(memtype, error) - CALL check("h5tclose_f",error, total_error) - CALL H5Fclose_f(file, error) - CALL check("h5fclose_f",error, total_error) - - -END SUBROUTINE t_string - -SUBROUTINE vl_test_special_char(total_error) - - USE HDF5 - USE TH5_MISC - IMPLICIT NONE - -! INTERFACE -! SUBROUTINE setup_buffer(data_in, line_lengths, char_type) -! USE HDF5 -! USE ISO_C_BINDING -! IMPLICIT NONE -! CHARACTER(len=*), DIMENSION(:) :: data_in -! INTEGER(size_t), DIMENSION(:) :: line_lengths -! CHARACTER(KIND=C_CHAR,LEN=*) :: char_type -! END SUBROUTINE setup_buffer -! END INTERFACE - - INTEGER, INTENT(OUT) :: total_error - - CHARACTER(LEN=16), PARAMETER :: filename = "t_controlchar.h5" - INTEGER, PARAMETER :: line_length = 10 - INTEGER(hid_t) :: file - INTEGER(hid_t) :: dataset0 - CHARACTER(len=line_length), DIMENSION(1:100) :: data_in - CHARACTER(len=line_length), DIMENSION(1:100) :: data_out - INTEGER(size_t), DIMENSION(1:100) :: line_lengths - INTEGER(hid_t) :: string_id, space, dcpl - INTEGER(hsize_t), DIMENSION(1:1) :: dims = (/0/) - INTEGER(hsize_t), DIMENSION(1:1) :: max_dims = (/0/) - INTEGER(hsize_t), DIMENSION(1:2) :: data_dims = (/0,0/) - INTEGER(hsize_t), DIMENSION(1:1) :: chunk =(/10/) - INTEGER, PARAMETER :: ncontrolchar = 7 - CHARACTER(KIND=C_CHAR,LEN=1), DIMENSION(1:ncontrolchar) :: controlchar = & - (/C_ALERT, C_BACKSPACE,C_CARRIAGE_RETURN, C_FORM_FEED,C_HORIZONTAL_TAB,C_VERTICAL_TAB, C_NEW_LINE/) - INTEGER :: i, j, n, error - n = 8 - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f",error, total_error) - - max_dims = (/H5S_UNLIMITED_F/) - - ! - ! Create the memory datatype. - ! - CALL h5tcopy_f(h5t_string, string_id, error) - CALL check("h5tcopy_f", error, total_error) - CALL h5tset_strpad_f(string_id, h5t_str_nullpad_f, error) - CALL check("h5tset_strpad_f", error, total_error) - dims(1) = n - ! - ! Create dataspace. - ! - CALL h5screate_simple_f(1, dims, space, error, max_dims) - CALL check("h5screate_simple_f", error, total_error) - CALL h5pcreate_f(h5p_dataset_create_f, dcpl, error) - CALL check("h5pcreate_f", error, total_error) - CALL h5pset_chunk_f(dcpl, 1, chunk, error) - CALL check("h5pset_chunk_f", error, total_error) - - data_dims(1) = line_length - data_dims(2) = n - ! - ! Create data with strings containing various control characters. - ! - DO i = 1, ncontrolchar - ! - ! Create the dataset, for the string with control character and write the string data to it. - ! - CALL h5dcreate_f(file, controlchar(i), string_id, space, dataset0, error, dcpl) - CALL check("h5dcreate_f", error, total_error) - CALL setup_buffer(data_in(1:n), line_lengths, controlchar(i)) - CALL h5dwrite_vl_f(dataset0, string_id, data_in(1:n), data_dims, line_lengths(1:n), error, space) - CALL check("h5dwrite_vl_f", error, total_error) - ! - ! Read the string back. - ! - CALL h5dread_vl_f(dataset0, string_id, data_out(1:n), data_dims, line_lengths(1:n), error, space) - CALL check("h5dread_vl_f", error, total_error) - - DO j = 1, n - IF(data_in(j).NE.data_out(j))THEN - total_error = total_error + 1 - EXIT - ENDIF - ENDDO - - CALL h5dclose_f(dataset0, error) - CALL check("h5dclose_f", error, total_error) - ENDDO - - CALL h5pclose_f(dcpl, error) - CALL check("h5pclose_f", error, total_error) - CALL h5sclose_f(space, error) - CALL check("h5sclose_f", error, total_error) - CALL h5fclose_f(file, error) - CALL check("h5fclose_f", error, total_error) - -END SUBROUTINE vl_test_special_char - - -SUBROUTINE setup_buffer(data_in, line_lengths, char_type) - - USE HDF5 - USE ISO_C_BINDING - - IMPLICIT NONE - - ! Creates a simple "Data_in" consisting of the letters of the alphabet, - ! one per line, with a control character. - - CHARACTER(len=10), DIMENSION(:) :: data_in - INTEGER(size_t), DIMENSION(:) :: line_lengths - INTEGER, DIMENSION(1:3) :: letters - CHARACTER(LEN=3) :: lets - CHARACTER(KIND=C_CHAR,LEN=*) :: char_type - CHARACTER(KIND=C_CHAR,LEN=1) :: char_tmp - INTEGER :: i, j, n, ff - - ! Convert the letters and special character to integers - lets = 'abc' - - READ(lets,'(3A1)') letters - READ(char_type,'(A1)') ff - n = SIZE(data_in) - j = 1 - DO i=1,n-1 - IF( j .EQ. 4 )THEN - WRITE(char_tmp,'(A1)') ff - data_in(i:i) = char_tmp - ELSE - WRITE(char_tmp,'(A1)') letters(j) - data_in(i:i) = char_tmp - ENDIF - line_lengths(i) = LEN_TRIM(data_in(i)) - j = j + 1 - IF( j .EQ. 5 ) j = 1 - END DO - WRITE(char_tmp,'(A1)') ff - data_in(n:n) = char_tmp - line_lengths(n) = 1 - -END SUBROUTINE setup_buffer - -!------------------------------------------------------------------------- -! Function: test_nbit -! -! Purpose: Tests (real, 4 byte) datatype for nbit filter -! -! Return: Success: 0 -! Failure: >0 -! -! Programmer: M. Scot Breitenfeld -! Decemeber 7, 2010 -! -! Modifications: Moved this subroutine from the 1.8 test file and -! modified it to use F2003 features. -! This routine requires 4 byte reals, so we use F2003 features to -! ensure the requirement is satisfied in a portable way. -! The need for this arises when a user specifies the default real is 8 bytes. -! MSB 7/31/12 -! -!------------------------------------------------------------------------- -! - -SUBROUTINE test_nbit(total_error ) - - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - INTEGER, PARAMETER :: wp = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors - INTEGER, INTENT(INOUT) :: total_error - INTEGER(hid_t) :: file - - INTEGER(hid_t) :: dataset, datatype, space, dc, mem_type_id - INTEGER(hsize_t), DIMENSION(1:2) :: dims = (/2,5/) - INTEGER(hsize_t), DIMENSION(1:2) :: chunk_dim = (/2,5/) - ! orig_data[] are initialized to be within the range that can be represented by - ! dataset datatype (no precision loss during datatype conversion) - ! - REAL(kind=wp), DIMENSION(1:2,1:5), TARGET :: orig_data = & - RESHAPE( (/188384.00, 19.103516, -1.0831790e9, -84.242188, & - 5.2045898, -49140.000, 2350.2500, -3.2110596e-1, 6.4998865e-5, -0.0000000/) , (/2,5/) ) - REAL(kind=wp), DIMENSION(1:2,1:5), TARGET :: new_data - INTEGER(size_t) :: PRECISION, offset - INTEGER :: error - LOGICAL :: status - INTEGER(hsize_t) :: i, j - TYPE(C_PTR) :: f_ptr - - ! check to see if filter is available - CALL H5Zfilter_avail_f(H5Z_FILTER_NBIT_F, status, error) - IF(.NOT.status)THEN ! We don't have H5Z_FILTER_NBIT_F filter - total_error = -1 ! so return - RETURN - ENDIF - - CALL H5Fcreate_f("nbit.h5", H5F_ACC_TRUNC_F, file, error) - CALL check("H5Fcreate_f", error, total_error) - - ! Define dataset datatype (integer), and set precision, offset - CALL H5Tcopy_f(H5T_IEEE_F32BE, datatype, error) - CALL CHECK(" H5Tcopy_f", error, total_error) - CALL H5Tset_fields_f(datatype, 26_size_t, 20_size_t, 6_size_t, 7_size_t, 13_size_t, error) - CALL CHECK(" H5Tset_fields_f", error, total_error) - offset = 7 - CALL H5Tset_offset_f(datatype, offset, error) - CALL CHECK(" H5Tset_offset_f", error, total_error) - PRECISION = 20 - CALL H5Tset_precision_f(datatype,PRECISION, error) - CALL CHECK(" H5Tset_precision_f", error, total_error) - - CALL H5Tset_size_f(datatype, 4_size_t, error) - CALL CHECK(" H5Tset_size_f", error, total_error) - - CALL H5Tset_ebias_f(datatype, 31_size_t, error) - CALL CHECK(" H5Tset_ebias_f", error, total_error) - - ! Create the data space - CALL H5Screate_simple_f(2, dims, space, error) - CALL CHECK(" H5Screate_simple_f", error, total_error) - - ! USE nbit filter - CALL H5Pcreate_f(H5P_DATASET_CREATE_F, dc, error) - CALL CHECK(" H5Pcreate_f", error, total_error) - - CALL H5Pset_chunk_f(dc, 2, chunk_dim, error) - CALL CHECK(" H5Pset_chunk_f", error, total_error) - CALL H5Pset_nbit_f(dc, error) - CALL CHECK(" H5Pset_nbit_f", error, total_error) - - ! Create the dataset - CALL H5Dcreate_f(file, "nbit_real", datatype, & - space, dataset, error, dc) - CALL CHECK(" H5Dcreate_f", error, total_error) - - !---------------------------------------------------------------------- - ! STEP 1: Test nbit by setting up a chunked dataset and writing - ! to it. - !---------------------------------------------------------------------- - ! - mem_type_id = h5kind_to_type(wp,H5_REAL_KIND) - - f_ptr = C_LOC(orig_data(1,1)) - CALL H5Dwrite_f(dataset, mem_type_id, f_ptr, error) - CALL CHECK(" H5Dwrite_f", error, total_error) - - !---------------------------------------------------------------------- - ! STEP 2: Try to read the data we just wrote. - !---------------------------------------------------------------------- - ! - f_ptr = C_LOC(new_data(1,1)) - CALL H5Dread_f(dataset, mem_type_id, f_ptr, error) - CALL CHECK(" H5Dread_f", error, total_error) - - ! Check that the values read are the same as the values written - ! Assume size of long long = size of double - ! - i_loop: DO i = 1, dims(1) - j_loop: DO j = 1, dims(2) - IF(.NOT.(orig_data(i,j).EQ.orig_data(i,j))) CYCLE ! skip IF value is NaN - IF( .NOT.dreal_eq( REAL(new_data(i,j),dp), REAL( orig_data(i,j), dp)) ) THEN - total_error = total_error + 1 - WRITE(*,'(" Read different values than written.")') - WRITE(*,'(" At index ", 2(1X,I0))') i, j - EXIT i_loop - END IF - ENDDO j_loop - ENDDO i_loop - - !---------------------------------------------------------------------- - ! Cleanup - !---------------------------------------------------------------------- - ! - CALL H5Tclose_f(datatype, error) - CALL CHECK(" H5Tclose_f", error, total_error) - CALL H5Pclose_f(dc, error) - CALL CHECK(" H5Pclose_f", error, total_error) - CALL H5Sclose_f(space, error) - CALL CHECK(" H5Sclose_f", error, total_error) - CALL H5Dclose_f(dataset, error) - CALL CHECK(" H5Dclose_f", error, total_error) - CALL H5Fclose_f(file, error) - CALL CHECK(" H5Fclose_f", error, total_error) - -END SUBROUTINE test_nbit - - -SUBROUTINE t_enum_conv(total_error) - -!------------------------------------------------------------------------- -! Subroutine: t_enum_conv -! -! Purpose: Tests converting data from enumeration datatype -! to numeric (integer or floating-point number) -! datatype. Tests various KINDs of INTEGERs -! and REALs. Checks reading enum data into -! INTEGER and REAL KINDs. -! -! Return: Success: 0 -! Failure: number of errors -! -! Programmer: M. Scot Breitenfeld -! October 27, 2012 -! -! Note: Adapted from C test (enum.c -- test_conv) -! No reliance on C tests. -!------------------------------------------------------------------------- -! - USE HDF5 - USE TH5_MISC - USE ISO_C_BINDING - - IMPLICIT NONE - - INTEGER, INTENT(INOUT) :: total_error - - INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(Fortran_INTEGER_4) !should map to INTEGER*4 on most modern processors - INTEGER, PARAMETER :: int_kind_16 = SELECTED_INT_KIND(Fortran_INTEGER_8)!should map to INTEGER*8 on most modern processors - - INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors - - INTEGER(hid_t) :: cwg=-1, dtype=-1, space=-1, dset=-1 ! Handles - INTEGER(hid_t) :: file ! Handles - - ! Enumerated type - ENUM, BIND(C) - ENUMERATOR :: E1_RED, E1_GREEN, E1_BLUE, E1_WHITE, E1_BLACK - END ENUM - - INTEGER(KIND(E1_RED)), TARGET :: val - - ! Enumerated data array - ! Some values are out of range for testing. The library should accept them - INTEGER(KIND(E1_RED)), DIMENSION(1:20), TARGET :: data1 = (/INT(E1_RED,KIND(E1_RED)), & - INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & - INT(E1_GREEN,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)), & - INT(E1_WHITE,KIND(E1_RED)), INT(E1_BLACK,KIND(E1_RED)), & - INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & - INT(E1_RED,KIND(E1_RED)), INT(E1_RED,KIND(E1_RED)), INT(E1_BLUE,KIND(E1_RED)), & - INT(E1_GREEN,KIND(E1_RED)), INT(E1_BLACK,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)),& - INT(E1_RED,KIND(E1_RED)), INT(E1_WHITE,KIND(E1_RED)), & - INT(0,KIND(E1_RED)), INT(-1,KIND(E1_RED)), INT(-2,KIND(E1_RED))/) - - ! Reading array for enum data - INTEGER(KIND(E1_RED)), DIMENSION(1:20), TARGET :: data2 - - ! Reading array's for converted enum data - INTEGER(C_SHORT), DIMENSION(1:20), TARGET :: data_short - INTEGER(C_INT), DIMENSION(1:20), TARGET :: data_int - REAL(C_DOUBLE), DIMENSION(1:20), TARGET :: data_double - - INTEGER(int_kind_8), DIMENSION(1:20), TARGET :: data_i8 - INTEGER(int_kind_16), DIMENSION(1:20), TARGET :: data_i16 - REAL(real_kind_7), DIMENSION(1:20), TARGET :: data_r7 - - INTEGER(hsize_t), DIMENSION(1:1) :: ds_size = (/20/) - INTEGER(size_t) :: i - INTEGER(hsize_t) :: ih - INTEGER :: error - TYPE(C_PTR) :: f_ptr - INTEGER(HID_T) :: m_baset ! Memory base type - ! - ! Create a new file using the default properties. - ! - CALL h5fcreate_f("enum1.h5", H5F_ACC_TRUNC_F, file, error) - CALL check("h5fcreate_f", error, total_error) - ! - ! Create a new group using the default properties. - ! - CALL h5gcreate_f(file, "test_conv", cwg, error) - CALL check("h5gcreate_f",error, total_error) - ! - ! Create a enum type - ! - CALL H5Tcreate_f(H5T_ENUM_F, H5OFFSETOF(C_LOC(data1(1)), C_LOC(data1(2))), dtype, error) - CALL check("h5tcreate_f",error, total_error) - ! - ! Initialize enum data. - ! - val = E1_RED - CALL H5Tenum_insert_f(dtype, "RED", C_LOC(val), error) - CALL check("h5tenum_insert_f",error, total_error) - val = E1_GREEN - CALL H5Tenum_insert_f(dtype, "GREEN", C_LOC(val), error) - CALL check("h5tenum_insert_f",error, total_error) - val = E1_BLUE - CALL H5Tenum_insert_f(dtype, "BLUE", C_LOC(val), error) - CALL check("h5tenum_insert_f",error, total_error) - val = E1_WHITE - CALL H5Tenum_insert_f(dtype, "WHITE", C_LOC(val), error) - CALL check("h5tenum_insert_f",error, total_error) - val = E1_BLACK - CALL H5Tenum_insert_f(dtype, "BLACK", C_LOC(val), error) - CALL check("h5tenum_insert_f",error, total_error) - ! - ! Create dataspace. Setting maximum size to be the current size. - ! - CALL h5screate_simple_f(1, ds_size, space, error) - CALL check("h5screate_simple_f", error, total_error) - - ! *************************************** - ! * Dataset of enumeration type - ! *************************************** - ! - ! Create a dataset of enum type and write enum data to it - - CALL h5dcreate_f(cwg, "color_table1", dtype, space, dset, error) - CALL check("h5dcreate_f", error, total_error) - - f_ptr = C_LOC(data1(1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) - CALL check(" h5dwrite_f", error, total_error) - - ! Test reading back the data with no conversion - - f_ptr = C_LOC(data2(1)) - CALL h5dread_f(dset, dtype, f_ptr, error, space, space) - CALL check(" h5dread_f", error, total_error) - - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. data2(ih))THEN - total_error = total_error + 1 - WRITE(*,'(" 1. data1(",I0,")=",I0," .NE. data2(",I0,")=",I0)') ih, data1(ih),i,data2(ih) - EXIT - ENDIF - ENDDO - - ! Test converting the data to integer (KIND=C_SHORT). Read enum data back as integer - m_baset = h5kind_to_type(KIND(data_short(1)), H5_INTEGER_KIND) ! Memory base type - f_ptr = C_LOC(data_short(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. data_short(ih))THEN - total_error = total_error + 1 - WRITE(*,'(" 2. data1(",I0,")=",I0," .NE. data_short(",I0,")=",I0)') ih, data1(ih),i,data_short(ih) - EXIT - ENDIF - ENDDO - - ! Test converting the data to (KIND=C_double) number. - ! Read enum data back as (KIND=C_double) number - - m_baset = h5kind_to_type(KIND(data_double(1)), H5_REAL_KIND) ! Memory base type - f_ptr = C_LOC(data_double(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_double(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 3. data_double(",I0,")=",I0," .NE. data_double(",I0,")=",I0)') & - ih, INT(data1(ih)), ih, INT(data_double(ih)) - EXIT - ENDIF - ENDDO - - ! Test converting the data to (SELECTED_INT_KIND(Fortran_INTEGER_4)) number. - ! Read enum data back as (SELECTED_INT_KIND(Fortran_INTEGER_4)) number - - m_baset = h5kind_to_type(int_kind_8, H5_INTEGER_KIND) ! Memory base type - f_ptr = C_LOC(data_i8(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_i8(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 4. data_i8(",I0,")=",I0," .NE. data_i8(",I0,")=",I0)') & - ih, INT(data1(ih)), i, INT(data_i8(ih)) - EXIT - ENDIF - ENDDO - - ! Test converting the data to (SELECTED_INT_KIND(Fortran_INTEGER_8)) number. - ! Read enum data back as (SELECTED_INT_KIND(Fortran_INTEGER_8)) number - - m_baset = h5kind_to_type(int_kind_16, H5_INTEGER_KIND) ! Memory base type - f_ptr = C_LOC(data_i16(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_i16(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 5. data_i16(",I0,")=",I0," .NE. data_i16(",I0,")=",I0)') & - ih, INT(data1(ih)), i, INT(data_i16(ih)) - EXIT - ENDIF - ENDDO - - ! Test converting the data to SELECTED_REAL_KIND(Fortran_REAL_4) number. - ! Read enum data back as SELECTED_REAL_KIND(Fortran_REAL_4) number - - m_baset = h5kind_to_type(KIND(data_r7(1)), H5_REAL_KIND) ! Memory base type - f_ptr = C_LOC(data_r7(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - ! Check values - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_r7(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 6. data_r7(",I0,")=",I0," .NE. data_r7(",I0,")=",I0)') & - ih, INT(data1(ih)), i, INT(data_r7(ih)) - EXIT - ENDIF - ENDDO - - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f", error, total_error) - - ! *************************************** - ! * Dataset of C_int type - ! *************************************** - - ! Create a integer dataset of KIND=C_INT and write enum data to it - m_baset = h5kind_to_type(KIND(data_int(1)), H5_INTEGER_KIND) ! Memory base type - CALL h5dcreate_f(cwg, "color_table2", m_baset, space, dset, error) - CALL check("h5dcreate_f", error, total_error) - - ! Write the enum data - f_ptr = C_LOC(data1(1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) - CALL check("h5dwrite_f", error, total_error) - - ! Test reading back the data with no conversion - f_ptr = C_LOC(data_int(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. data_int(ih))THEN - total_error = total_error + 1 - WRITE(*,'(" 7. data1(",I0,")=",I0," .NE. data_int(",I0,")=",I0)') ih, data1(ih),i,data_int(ih) - EXIT - ENDIF - ENDDO - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f", error, total_error) - - !************************************** - !* Dataset of C_double type - !************************************** - - ! Create a dataset of KIND=C_DOUBLE and write enum data to it - m_baset = h5kind_to_type(KIND(data_double(1)), H5_REAL_KIND) ! Memory base type - CALL h5dcreate_f(cwg, "color_table3", m_baset, space, dset, error) - CALL check("h5dcreate_f", error, total_error) - - f_ptr = C_LOC(data1(1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) - CALL check("h5dwrite_f", error, total_error) - - ! Test reading back the data with no conversion - f_ptr = C_LOC(data_double(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_double(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 8. data1(",I0,")=",I0," .NE. data_double(",I0,")=",I0)') ih, data1(ih),ih,INT(data_double(ih)) - EXIT - ENDIF - ENDDO - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f", error, total_error) - - !********************************************************* - !* Dataset of real SELECTED_REAL_KIND(Fortran_REAL_4) type - !********************************************************* - - ! Create a dataset of SELECTED_REAL_KIND(Fortran_REAL_4) and write enum data to it - m_baset = h5kind_to_type(KIND(data_r7(1)), H5_REAL_KIND) ! Memory base type - CALL h5dcreate_f(cwg, "color_table4", m_baset, space, dset, error) - CALL check("h5dcreate_f", error, total_error) - - f_ptr = C_LOC(data1(1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) - CALL check("h5dwrite_f", error, total_error) - - ! Test reading back the data with no conversion - f_ptr = C_LOC(data_r7(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. INT(data_r7(ih)))THEN - total_error = total_error + 1 - WRITE(*,'(" 9. data1(",I0,")=",I0," .NE. data_r7(",I0,")=",I0)') ih, data1(ih),ih,INT(data_r7(ih)) - EXIT - ENDIF - ENDDO - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f", error, total_error) - - ! ***************************************************************** - ! * Dataset of integer SELECTED_INT_KIND(Fortran_INTEGER_8) type - ! ***************************************************************** - - ! Create a integer dataset of (SELECTED_INT_KIND(Fortran_INTEGER_8)) and write enum data to it - m_baset = h5kind_to_type(KIND(data_i16(1)), H5_INTEGER_KIND) ! Memory base type - CALL h5dcreate_f(cwg, "color_table5", m_baset, space, dset, error) - CALL check("h5dcreate_f", error, total_error) - - ! Write the enum data - f_ptr = C_LOC(data1(1)) - CALL h5dwrite_f(dset, dtype, f_ptr, error, space, space) - CALL check("h5dwrite_f", error, total_error) - - ! Test reading back the data with no conversion - f_ptr = C_LOC(data_i16(1)) - CALL h5dread_f(dset, m_baset, f_ptr, error, space, space) - CALL check("h5dread_f", error, total_error) - - DO ih = 1, ds_size(1) - IF(data1(ih) .NE. data_i16(ih))THEN - total_error = total_error + 1 - WRITE(*,'(" 10. data1(",I0,")=",I0," .NE. data_i16(",I0,")=",I0)') ih, data1(ih),ih,data_i16(ih) - EXIT - ENDIF - ENDDO - CALL h5dclose_f(dset, error) - CALL check("h5dclose_f", error, total_error) - - ! - ! Close and release resources. - ! - CALL h5sclose_f(space, error) - CALL check("H5Sclose_f", error, total_error) - CALL h5tclose_f(dtype, error) - CALL check("H5Tclose_f", error, total_error) - CALL h5gclose_f(cwg, error) - CALL check("h5gclose_f",error, total_error) - CALL h5fclose_f(file, error) - CALL check("H5Fclose_f", error, total_error) - -END SUBROUTINE t_enum_conv - -END MODULE TH5T_F03 diff --git a/fortran/test/tH5VL.f90 b/fortran/test/tH5VL.f90 index 651ca75..834fbde 100644 --- a/fortran/test/tH5VL.f90 +++ b/fortran/test/tH5VL.f90 @@ -28,12 +28,13 @@ !***** MODULE TH5VL + USE HDF5 ! This module contains all necessary modules + USE TH5_MISC + USE TH5_MISC_GEN CONTAINS SUBROUTINE vl_test_integer(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -194,8 +195,6 @@ CONTAINS END SUBROUTINE vl_test_integer SUBROUTINE vl_test_real(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup @@ -328,18 +327,15 @@ CONTAINS CALL h5dread_vl_f(dset_id, vltype_id, vl_real_data_out, data_dims, len_out, & error, mem_space_id = dspace_id, file_space_id = dspace_id) CALL check("h5dread_real_f", error, total_error) - do ih = 1, data_dims(2) - do jh = 1, len_out(ih) - IF( .NOT.dreal_eq( REAL(vl_real_data(jh,ih),dp), REAL(vl_real_data_out(jh,ih), dp)) ) THEN - total_error = total_error + 1 - WRITE(*,*) "h5dread_vl_f returned incorrect data" - ENDIF - enddo - if (len(ih) .ne. len_out(ih)) then - total_error = total_error + 1 - write(*,*) "h5dread_vl_f returned incorrect data" - endif - enddo + DO ih = 1, data_dims(2) + DO jh = 1, len_out(ih) + CALL VERIFY("h5dread_vl_f returned incorrect data",vl_real_data(jh,ih),vl_real_data_out(jh,ih), total_error) + ENDDO + IF (LEN(ih) .NE. len_out(ih)) THEN + total_error = total_error + 1 + WRITE(*,*) "h5dread_vl_f returned incorrect data" + ENDIF + ENDDO ! @@ -367,8 +363,6 @@ CONTAINS END SUBROUTINE vl_test_real SUBROUTINE vl_test_string(cleanup, total_error) - USE HDF5 ! This module contains all necessary modules - USE TH5_MISC IMPLICIT NONE LOGICAL, INTENT(IN) :: cleanup diff --git a/fortran/test/tHDF5.f90 b/fortran/test/tHDF5.f90 index e73fed2..d12bb25 100644 --- a/fortran/test/tHDF5.f90 +++ b/fortran/test/tHDF5.f90 @@ -29,6 +29,7 @@ MODULE THDF5 USE TH5_MISC + USE TH5_MISC_GEN USE TH5A USE TH5D USE TH5E diff --git a/fortran/test/tf.F90 b/fortran/test/tf.F90 new file mode 100644 index 0000000..7d67f30 --- /dev/null +++ b/fortran/test/tf.F90 @@ -0,0 +1,412 @@ +!****h* root/fortran/test/tf.f90 +! +! NAME +! tf.f90 +! +! FUNCTION +! Contains subroutines which are needed in all the hdf5 fortran tests +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! CONTAINS SUBROUTINES +! write_test_status, check, verify, verifyLogical, verifyString, h5_fixname_f, +! h5_cleanup_f, h5_exit_f, h5_env_nocleanup_f,dreal_eqv +! +!***** + +#include "H5config_f.inc" + +MODULE TH5_MISC + + USE, INTRINSIC :: ISO_C_BINDING + + IMPLICIT NONE + + INTEGER, PARAMETER :: sp = SELECTED_REAL_KIND(5) ! This should map to REAL*4 on most modern processors + INTEGER, PARAMETER :: dp = SELECTED_REAL_KIND(10) ! This should map to REAL*8 on most modern processors + + ! generic compound datatype + TYPE, BIND(C) :: comp_datatype + REAL :: a + INTEGER :: x + DOUBLE PRECISION :: y + CHARACTER(KIND=C_CHAR) :: z + END TYPE comp_datatype + + PUBLIC :: H5_SIZEOF + INTERFACE H5_SIZEOF + MODULE PROCEDURE H5_SIZEOF_CMPD + MODULE PROCEDURE H5_SIZEOF_CHR + MODULE PROCEDURE H5_SIZEOF_I + MODULE PROCEDURE H5_SIZEOF_SP,H5_SIZEOF_DP + END INTERFACE + +CONTAINS + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: write_test_status +!DEC$endif + SUBROUTINE write_test_status( test_result, test_title, total_error) + + ! Writes the results of the tests + + IMPLICIT NONE + + INTEGER, INTENT(IN) :: test_result ! negative, --skip -- + ! 0 , passed + ! positive, failed + + CHARACTER(LEN=*), INTENT(IN) :: test_title ! Short description of test + INTEGER, INTENT(INOUT) :: total_error ! Accumulated error + +! Controls the output style for reporting test results + + CHARACTER(LEN=8) :: error_string + CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' + CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' + CHARACTER(LEN=8), PARAMETER :: skip = '--SKIP--' + + + error_string = failure + IF (test_result == 0) THEN + error_string = success + ELSE IF (test_result == -1) THEN + error_string = skip + ENDIF + + WRITE(*, fmt = '(A, T72, A)') test_title, error_string + + IF(test_result.GT.0) total_error = total_error + test_result + + END SUBROUTINE write_test_status + + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: check +!DEC$endif + SUBROUTINE check(string,error,total_error) + CHARACTER(LEN=*) :: string + INTEGER :: error, total_error + IF (error .LT. 0) THEN + total_error=total_error+1 + WRITE(*,*) string, " FAILED" + ENDIF + RETURN + END SUBROUTINE check + +!---------------------------------------------------------------------- +! Name: h5_fixname_f +! +! Purpose: Create a file name from the a file base name. +! It is a fortran counterpart for the h5_fixname in ../../test/h5test.c +! +! Inputs: +! base_name - base name of the file +! fapl - file access property list +! Outputs: +! full_name - full file name +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! Programmer: Elena Pourmal +! September 13, 2002 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_fixname_f(base_name, full_name, fapl, hdferr) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_fixname_f +!DEC$endif + USE H5GLOBAL + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name + CHARACTER(LEN=*), INTENT(IN) :: full_name ! full name + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list + + INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string + INTEGER(SIZE_T) :: full_namelen ! Length of the full name character string +! INTEGER(HID_T) :: fapl_default + + INTERFACE + INTEGER FUNCTION h5_fixname_c(base_name, base_namelen, fapl, & + full_name, full_namelen) + USE H5GLOBAL + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_FIXNAME_C':: h5_fixname_c + !DEC$ ENDIF + !DEC$ATTRIBUTES reference :: base_name + !DEC$ATTRIBUTES reference :: full_name + CHARACTER(LEN=*), INTENT(IN) :: base_name + INTEGER(SIZE_T) :: base_namelen + INTEGER(HID_T), INTENT(IN) :: fapl + CHARACTER(LEN=*), INTENT(IN) :: full_name + INTEGER(SIZE_T) :: full_namelen + END FUNCTION h5_fixname_c + END INTERFACE + + base_namelen = LEN(base_name) + full_namelen = LEN(full_name) + hdferr = h5_fixname_c(base_name, base_namelen, fapl, & + full_name, full_namelen) + + END SUBROUTINE h5_fixname_f + +!---------------------------------------------------------------------- +! Name: h5_cleanup_f +! +! Purpose: Cleanups tests files +! It is a fortran counterpart for the h5_cleanup in ../../test/h5test.c +! +! Inputs: +! base_name - base name of the file +! fapl - file access property list +! Outputs: +! hdferr: - error code +! Success: 0 +! Failure: -1 +! +! Programmer: Elena Pourmal +! September 19, 2002 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_cleanup_f(base_name, fapl, hdferr) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_cleanup_f +!DEC$endif + USE H5GLOBAL + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name + INTEGER, INTENT(OUT) :: hdferr ! Error code + INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list + + INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string + + INTERFACE + INTEGER FUNCTION h5_cleanup_c(base_name, base_namelen, fapl) + USE H5GLOBAL + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_CLEANUP_C':: h5_cleanup_c + !DEC$ ENDIF + !DEC$ATTRIBUTES reference :: base_name + CHARACTER(LEN=*), INTENT(IN) :: base_name + INTEGER(SIZE_T) :: base_namelen + INTEGER(HID_T), INTENT(IN) :: fapl + END FUNCTION h5_cleanup_c + END INTERFACE + + base_namelen = LEN(base_name) + hdferr = h5_cleanup_c(base_name, base_namelen, fapl) + + END SUBROUTINE h5_cleanup_f + +!---------------------------------------------------------------------- +! Name: h5_exit_f +! +! Purpose: Exit application +! It is a fortran counterpart for the standard C 'exit()' routine +! Be careful not to overflow the exit value range since +! UNIX supports a very small range such as 1 byte. +! Therefore, exit(256) may end up as exit(0). +! +! Inputs: +! status - Status to return from application +! +! Outputs: +! none +! +! Programmer: Quincey Koziol +! December 14, 2004 +! +! +!---------------------------------------------------------------------- + SUBROUTINE h5_exit_f(status) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_exit_f +!DEC$endif + IMPLICIT NONE + INTEGER, INTENT(IN) :: status ! Return code + + INTERFACE + SUBROUTINE h5_exit_c(status) + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_EXIT_C':: h5_exit_c + !DEC$ ENDIF + INTEGER, INTENT(IN) :: status + END SUBROUTINE h5_exit_c + END INTERFACE + + CALL h5_exit_c(status) + + END SUBROUTINE h5_exit_f + +!---------------------------------------------------------------------- +! Name: h5_env_nocleanup_f +! +! Purpose: Uses the HDF5_NOCLEANUP environment variable in Fortran +! tests to determine if the output files should be removed +! +! Inputs: +! +! Outputs: HDF5_NOCLEANUP: .true. - don't remove test files +! .false. - remove test files +! +! Programmer: M.S. Breitenfeld +! September 30, 2008 +! +!---------------------------------------------------------------------- + SUBROUTINE h5_env_nocleanup_f(HDF5_NOCLEANUP) +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_env_nocleanup_f +!DEC$endif + IMPLICIT NONE + LOGICAL, INTENT(OUT) :: HDF5_NOCLEANUP ! Return code + INTEGER :: status + + INTERFACE + SUBROUTINE h5_env_nocleanup_c(status) + !DEC$ IF DEFINED(HDF5F90_WINDOWS) + !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_ENV_NOCLEANUP_C':: h5_env_nocleanup_c + !DEC$ ENDIF + INTEGER :: status + END SUBROUTINE h5_env_nocleanup_c + END INTERFACE + + CALL h5_env_nocleanup_c(status) + + HDF5_NOCLEANUP = .FALSE. + IF(status.EQ.1) HDF5_NOCLEANUP = .TRUE. + + END SUBROUTINE h5_env_nocleanup_f + +! --------------------------------------------------------------------------------------------------- +! H5_SIZEOF routines +! +! NOTES +! (1) The Sun/Oracle compiler has the following restrictions on the SIZEOF intrinsic function: +! +! "The SIZEOF intrinsic cannot be applied to arrays of an assumed size, characters of a +! length that is passed, or subroutine calls or names. SIZEOF returns default INTEGER*4 data. +! If compiling for a 64-bit environment, the compiler will issue a warning if the result overflows +! the INTEGER*4 data range. To use SIZEOF in a 64-bit environment with arrays larger +! than the INTEGER*4 limit (2 Gbytes), the SIZEOF function and +! the variables receiving the result must be declared INTEGER*8." +! +! Thus, we can not overload the H5_SIZEOF function to handle arrays (as used in tH5P_F03.f90), or +! characters that do not have a set length (as used in tH5P_F03.f90), sigh... +! +! (2) F08+TS29113 requires C interoperable variable as argument for C_SIZEOF. +! +! (3) Unfortunately we need to wrap the C_SIZEOF/STORAGE_SIZE functions to handle different +! data types from the various tests. +! +! --------------------------------------------------------------------------------------------------- + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_sizeof_cmpd +!DEC$endif + INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CMPD(a) + IMPLICIT NONE + TYPE(comp_datatype), INTENT(in) :: a + +#ifdef H5_FORTRAN_FORTRAN_HAVE_C_SIZEOF + H5_SIZEOF_CMPD = C_SIZEOF(a) +#else + H5_SIZEOF_CMPD = SIZEOF(a) +#endif + + END FUNCTION H5_SIZEOF_CMPD + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_sizeof_chr +!DEC$endif + INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CHR(a) + IMPLICIT NONE + CHARACTER(LEN=1), INTENT(in) :: a + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + H5_SIZEOF_CHR = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) +#else + H5_SIZEOF_CHR = SIZEOF(a) +#endif + + END FUNCTION H5_SIZEOF_CHR + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_sizeof_i +!DEC$endif + INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_I(a) + IMPLICIT NONE + INTEGER, INTENT(in):: a + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + H5_SIZEOF_I = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) +#else + H5_SIZEOF_I = SIZEOF(a) +#endif + + END FUNCTION H5_SIZEOF_I + + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_sizeof_sp +!DEC$endif + INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_SP(a) + IMPLICIT NONE + REAL(sp), INTENT(in):: a + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + H5_SIZEOF_SP = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) +#else + H5_SIZEOF_SP = SIZEOF(a) +#endif + + END FUNCTION H5_SIZEOF_SP + +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_TEST_DLL) +!DEC$attributes dllexport :: h5_sizeof_dp +!DEC$endif + INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_DP(a) + IMPLICIT NONE + REAL(dp), INTENT(in):: a + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + H5_SIZEOF_DP = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) +#else + H5_SIZEOF_DP = SIZEOF(a) +#endif + + END FUNCTION H5_SIZEOF_DP + +END MODULE TH5_MISC diff --git a/fortran/test/tf.f90 b/fortran/test/tf.f90 deleted file mode 100644 index 450daf2..0000000 --- a/fortran/test/tf.f90 +++ /dev/null @@ -1,393 +0,0 @@ -!****h* root/fortran/test/tf.f90 -! -! NAME -! tf.f90 -! -! FUNCTION -! Contains subroutines which are needed in all the hdf5 fortran tests -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! CONTAINS SUBROUTINES -! write_test_status, check, verify, verifyLogical, verifyString, h5_fixname_f, -! h5_cleanup_f, h5_exit_f, h5_env_nocleanup_f,dreal_eqv -! -!***** -MODULE TH5_MISC - - USE TH5_MISC_PROVISIONAL - - IMPLICIT NONE - -CONTAINS - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: dreal_eq -!DEC$endif - LOGICAL FUNCTION dreal_eq(a,b) - - ! Check if two double precision reals are equivalent - REAL(dp), INTENT (in):: a,b - REAL(dp), PARAMETER :: eps = 1.e-8 - dreal_eq = ABS(a-b) .LT. eps - - END FUNCTION dreal_eq - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verify_real_kind_7 -!DEC$endif - SUBROUTINE verify_real_kind_7(string,value,correct_value,total_error) - USE HDF5 - INTEGER, PARAMETER :: real_kind_7 = SELECTED_REAL_KIND(Fortran_REAL_4) !should map to REAL*4 on most modern processors - CHARACTER(LEN=*) :: string - REAL(real_kind_7) :: value, correct_value - INTEGER :: total_error - IF (.NOT.dreal_eq( REAL(value,dp), REAL(correct_value, dp)) ) THEN - total_error=total_error+1 - WRITE(*,*) "ERROR: INCORRECT REAL VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verify_real_kind_7 - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: write_test_status -!DEC$endif - SUBROUTINE write_test_status( test_result, test_title, total_error) - - ! Writes the results of the tests - - IMPLICIT NONE - - INTEGER, INTENT(IN) :: test_result ! negative, --skip -- - ! 0 , passed - ! positive, failed - - CHARACTER(LEN=*), INTENT(IN) :: test_title ! Short description of test - INTEGER, INTENT(INOUT) :: total_error ! Accumulated error - -! Controls the output style for reporting test results - - CHARACTER(LEN=8) :: error_string - CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' - CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' - CHARACTER(LEN=8), PARAMETER :: skip = '--SKIP--' - - - error_string = failure - IF (test_result == 0) THEN - error_string = success - ELSE IF (test_result == -1) THEN - error_string = skip - ENDIF - - WRITE(*, fmt = '(A, T72, A)') test_title, error_string - - IF(test_result.GT.0) total_error = total_error + test_result - - END SUBROUTINE write_test_status - - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: check -!DEC$endif - SUBROUTINE check(string,error,total_error) - CHARACTER(LEN=*) :: string - INTEGER :: error, total_error - IF (error .LT. 0) THEN - total_error=total_error+1 - WRITE(*,*) string, " FAILED" - ENDIF - RETURN - END SUBROUTINE check - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verify -!DEC$endif - SUBROUTINE VERIFY(string,value,correct_value,total_error) - CHARACTER(LEN=*) :: string - INTEGER :: value, correct_value, total_error - IF (value .NE. correct_value) THEN - total_error=total_error+1 - WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verify - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verify_INTEGER_HID_T -!DEC$endif - SUBROUTINE verify_INTEGER_HID_T(string,value,correct_value,total_error) - USE HDF5 - CHARACTER(LEN=*) :: string - INTEGER(HID_T) :: value, correct_value - INTEGER :: total_error - IF (value .NE. correct_value) THEN - total_error=total_error+1 - WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verify_INTEGER_HID_T - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verify_Fortran_INTEGER_4 -!DEC$endif - SUBROUTINE verify_Fortran_INTEGER_4(string,value,correct_value,total_error) - USE HDF5 - INTEGER, PARAMETER :: int_kind_8 = SELECTED_INT_KIND(Fortran_INTEGER_4) ! should map to INTEGER*4 on most modern processors - CHARACTER(LEN=*) :: string - INTEGER(int_kind_8) :: value, correct_value - INTEGER :: total_error - IF (value .NE. correct_value) THEN - total_error=total_error+1 - WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verify_Fortran_INTEGER_4 - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verifyLogical -!DEC$endif - SUBROUTINE verifyLogical(string,value,correct_value,total_error) - CHARACTER(LEN=*) :: string - LOGICAL :: value, correct_value - INTEGER :: total_error - IF (value .NEQV. correct_value) THEN - total_error = total_error + 1 - WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verifyLogical - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: verifyString -!DEC$endif - SUBROUTINE verifyString(string, value,correct_value,total_error) - CHARACTER*(*) :: string - CHARACTER*(*) :: value, correct_value - INTEGER :: total_error - IF (TRIM(value) .NE. TRIM(correct_value)) THEN - total_error = total_error + 1 - WRITE(*,*) "ERROR: INCORRECT VALIDATION ", string - ENDIF - RETURN - END SUBROUTINE verifyString - - -!---------------------------------------------------------------------- -! Name: h5_fixname_f -! -! Purpose: Create a file name from the a file base name. -! It is a fortran counterpart for the h5_fixname in ../../test/h5test.c -! -! Inputs: -! base_name - base name of the file -! fapl - file access property list -! Outputs: -! full_name - full file name -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! Programmer: Elena Pourmal -! September 13, 2002 -! -! -!---------------------------------------------------------------------- - SUBROUTINE h5_fixname_f(base_name, full_name, fapl, hdferr) -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_fixname_f -!DEC$endif - USE H5GLOBAL - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name - CHARACTER(LEN=*), INTENT(IN) :: full_name ! full name - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list - - INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string - INTEGER(SIZE_T) :: full_namelen ! Length of the full name character string -! INTEGER(HID_T) :: fapl_default - - INTERFACE - INTEGER FUNCTION h5_fixname_c(base_name, base_namelen, fapl, & - full_name, full_namelen) - USE H5GLOBAL - !DEC$ IF DEFINED(HDF5F90_WINDOWS) - !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_FIXNAME_C':: h5_fixname_c - !DEC$ ENDIF - !DEC$ATTRIBUTES reference :: base_name - !DEC$ATTRIBUTES reference :: full_name - CHARACTER(LEN=*), INTENT(IN) :: base_name - INTEGER(SIZE_T) :: base_namelen - INTEGER(HID_T), INTENT(IN) :: fapl - CHARACTER(LEN=*), INTENT(IN) :: full_name - INTEGER(SIZE_T) :: full_namelen - END FUNCTION h5_fixname_c - END INTERFACE - - base_namelen = LEN(base_name) - full_namelen = LEN(full_name) - hdferr = h5_fixname_c(base_name, base_namelen, fapl, & - full_name, full_namelen) - - END SUBROUTINE h5_fixname_f - -!---------------------------------------------------------------------- -! Name: h5_cleanup_f -! -! Purpose: Cleanups tests files -! It is a fortran counterpart for the h5_cleanup in ../../test/h5test.c -! -! Inputs: -! base_name - base name of the file -! fapl - file access property list -! Outputs: -! hdferr: - error code -! Success: 0 -! Failure: -1 -! -! Programmer: Elena Pourmal -! September 19, 2002 -! -! -!---------------------------------------------------------------------- - SUBROUTINE h5_cleanup_f(base_name, fapl, hdferr) -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_cleanup_f -!DEC$endif - USE H5GLOBAL - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(IN) :: base_name ! base name - INTEGER, INTENT(OUT) :: hdferr ! Error code - INTEGER(HID_T), INTENT(IN) :: fapl ! file access property list - - INTEGER(SIZE_T) :: base_namelen ! Length of the base name character string - - INTERFACE - INTEGER FUNCTION h5_cleanup_c(base_name, base_namelen, fapl) - USE H5GLOBAL - !DEC$ IF DEFINED(HDF5F90_WINDOWS) - !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_CLEANUP_C':: h5_cleanup_c - !DEC$ ENDIF - !DEC$ATTRIBUTES reference :: base_name - CHARACTER(LEN=*), INTENT(IN) :: base_name - INTEGER(SIZE_T) :: base_namelen - INTEGER(HID_T), INTENT(IN) :: fapl - END FUNCTION h5_cleanup_c - END INTERFACE - - base_namelen = LEN(base_name) - hdferr = h5_cleanup_c(base_name, base_namelen, fapl) - - END SUBROUTINE h5_cleanup_f - -!---------------------------------------------------------------------- -! Name: h5_exit_f -! -! Purpose: Exit application -! It is a fortran counterpart for the standard C 'exit()' routine -! Be careful not to overflow the exit value range since -! UNIX supports a very small range such as 1 byte. -! Therefore, exit(256) may end up as exit(0). -! -! Inputs: -! status - Status to return from application -! -! Outputs: -! none -! -! Programmer: Quincey Koziol -! December 14, 2004 -! -! -!---------------------------------------------------------------------- - SUBROUTINE h5_exit_f(status) -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_exit_f -!DEC$endif - IMPLICIT NONE - INTEGER, INTENT(IN) :: status ! Return code - - INTERFACE - SUBROUTINE h5_exit_c(status) - !DEC$ IF DEFINED(HDF5F90_WINDOWS) - !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_EXIT_C':: h5_exit_c - !DEC$ ENDIF - INTEGER, INTENT(IN) :: status - END SUBROUTINE h5_exit_c - END INTERFACE - - CALL h5_exit_c(status) - - END SUBROUTINE h5_exit_f - -!---------------------------------------------------------------------- -! Name: h5_env_nocleanup_f -! -! Purpose: Uses the HDF5_NOCLEANUP environment variable in Fortran -! tests to determine if the output files should be removed -! -! Inputs: -! -! Outputs: HDF5_NOCLEANUP: .true. - don't remove test files -! .false. - remove test files -! -! Programmer: M.S. Breitenfeld -! September 30, 2008 -! -!---------------------------------------------------------------------- - SUBROUTINE h5_env_nocleanup_f(HDF5_NOCLEANUP) -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_env_nocleanup_f -!DEC$endif - IMPLICIT NONE - LOGICAL, INTENT(OUT) :: HDF5_NOCLEANUP ! Return code - INTEGER :: status - - INTERFACE - SUBROUTINE h5_env_nocleanup_c(status) - !DEC$ IF DEFINED(HDF5F90_WINDOWS) - !DEC$ ATTRIBUTES C,reference,decorate,alias:'H5_ENV_NOCLEANUP_C':: h5_env_nocleanup_c - !DEC$ ENDIF - INTEGER :: status - END SUBROUTINE h5_env_nocleanup_c - END INTERFACE - - CALL h5_env_nocleanup_c(status) - - HDF5_NOCLEANUP = .FALSE. - IF(status.EQ.1) HDF5_NOCLEANUP = .TRUE. - - END SUBROUTINE h5_env_nocleanup_f -END MODULE TH5_MISC diff --git a/fortran/test/tf_F03.f90 b/fortran/test/tf_F03.f90 deleted file mode 100644 index b3f1399..0000000 --- a/fortran/test/tf_F03.f90 +++ /dev/null @@ -1,128 +0,0 @@ -!****h* root/fortran/test/tf_F03.f90 -! -! NAME -! tf_F03.f90 -! -! FUNCTION -! Contains functions that are part of the F2003 standard, and are not F2008 compliant. -! Needed by the hdf5 fortran tests. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! CONTAINS SUBROUTINES -! H5_SIZEOF -! -! NOTES -! The Sun/Oracle compiler has the following restrictions on the SIZEOF intrinsic function: -! -! "The SIZEOF intrinsic cannot be applied to arrays of an assumed size, characters of a -! length that is passed, or subroutine calls or names. SIZEOF returns default INTEGER*4 data. -! If compiling for a 64-bit environment, the compiler will issue a warning if the result overflows -! the INTEGER*4 data range. To use SIZEOF in a 64-bit environment with arrays larger -! than the INTEGER*4 limit (2 Gbytes), the SIZEOF function and -! the variables receiving the result must be declared INTEGER*8." -! -! Thus, we can not overload the H5_SIZEOF function to handle arrays (as used in tH5P_F03.f90), or -! characters that do not have a set length (as used in tH5P_F03.f90), sigh... -! -!***** -MODULE TH5_MISC_PROVISIONAL - - USE ISO_C_BINDING - IMPLICIT NONE - - INTEGER, PARAMETER :: sp = SELECTED_REAL_KIND(5) ! This should map to REAL*4 on most modern processors - INTEGER, PARAMETER :: dp = SELECTED_REAL_KIND(10) ! This should map to REAL*8 on most modern processors - - ! generic compound datatype - TYPE, BIND(C) :: comp_datatype - REAL :: a - INTEGER :: x - DOUBLE PRECISION :: y - CHARACTER(LEN=1) :: z - END TYPE comp_datatype - - PUBLIC :: H5_SIZEOF - INTERFACE H5_SIZEOF - MODULE PROCEDURE H5_SIZEOF_CMPD - MODULE PROCEDURE H5_SIZEOF_I, H5_SIZEOF_CHR - MODULE PROCEDURE H5_SIZEOF_SP,H5_SIZEOF_DP - END INTERFACE - -CONTAINS - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_cmpd - !DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CMPD(a) - IMPLICIT NONE - TYPE(comp_datatype), INTENT(in) :: a - - H5_SIZEOF_CMPD = SIZEOF(a) - - END FUNCTION H5_SIZEOF_CMPD - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_chr -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CHR(a) - IMPLICIT NONE - CHARACTER(LEN=1), INTENT(in):: a - - H5_SIZEOF_CHR = SIZEOF(a) - - END FUNCTION H5_SIZEOF_CHR - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_i -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_I(a) - IMPLICIT NONE - INTEGER, INTENT(in):: a - - H5_SIZEOF_I = SIZEOF(a) - - END FUNCTION H5_SIZEOF_I - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_sp -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_SP(a) - IMPLICIT NONE - REAL(sp), INTENT(in):: a - - H5_SIZEOF_SP = SIZEOF(a) - - END FUNCTION H5_SIZEOF_SP - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_dp -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_DP(a) - IMPLICIT NONE - REAL(dp), INTENT(in):: a - - H5_SIZEOF_DP = SIZEOF(a) - - END FUNCTION H5_SIZEOF_DP - -END MODULE TH5_MISC_PROVISIONAL diff --git a/fortran/test/tf_F08.f90 b/fortran/test/tf_F08.f90 deleted file mode 100644 index 20c2859..0000000 --- a/fortran/test/tf_F08.f90 +++ /dev/null @@ -1,128 +0,0 @@ -!****h* root/fortran/test/tf_F08.f90 -! -! NAME -! tf_F08.f90 -! -! FUNCTION -! Contains functions that are part of the F2008 standard and needed by -! the hdf5 fortran tests. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! CONTAINS SUBROUTINES -! H5_SIZEOF -! -! NOTES -! This file contains "sizeof" functions that are F2008 standard compliant -! and replace the non-standard 'SIZEOF' functions found in the file tf_F03. -! Unfortunity we need to wrap the C_SIZEOF/STORAGE_SIZE functions to handle different -! data types from the various tests. -! -! F08+TS29113 requires C interoperable variable as argument for C_SIZEOF. -! -! This file will be build instead of tf_F03.f90 if the intrinsic fortran -! function C_SIZEOF/STORAGE_SIZE is found during configure. -! -!***** -MODULE TH5_MISC_PROVISIONAL - - USE ISO_C_BINDING - IMPLICIT NONE - - INTEGER, PARAMETER :: sp = SELECTED_REAL_KIND(5) ! This should map to REAL*4 on most modern processors - INTEGER, PARAMETER :: dp = SELECTED_REAL_KIND(10) ! This should map to REAL*8 on most modern processors - - ! generic compound datatype - TYPE, BIND(C) :: comp_datatype - REAL :: a - INTEGER :: x - DOUBLE PRECISION :: y - CHARACTER(LEN=1) :: z - END TYPE comp_datatype - - PUBLIC :: H5_SIZEOF - INTERFACE H5_SIZEOF - MODULE PROCEDURE H5_SIZEOF_CMPD - MODULE PROCEDURE H5_SIZEOF_CHR - MODULE PROCEDURE H5_SIZEOF_I - MODULE PROCEDURE H5_SIZEOF_SP,H5_SIZEOF_DP - END INTERFACE - -CONTAINS - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_cmpd -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CMPD(a) - IMPLICIT NONE - TYPE(comp_datatype), INTENT(in) :: a - - H5_SIZEOF_CMPD = C_SIZEOF(a) - - END FUNCTION H5_SIZEOF_CMPD - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_chr -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_CHR(a) - IMPLICIT NONE - CHARACTER(LEN=*), INTENT(in) :: a - - H5_SIZEOF_CHR = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) - - END FUNCTION H5_SIZEOF_CHR - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_i -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_I(a) - IMPLICIT NONE - INTEGER, INTENT(in):: a - - H5_SIZEOF_I = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) - - END FUNCTION H5_SIZEOF_I - - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_sp -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_SP(a) - IMPLICIT NONE - REAL(sp), INTENT(in):: a - - H5_SIZEOF_SP = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) - - END FUNCTION H5_SIZEOF_SP - -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_TEST_DLL) -!DEC$attributes dllexport :: h5_sizeof_dp -!DEC$endif - INTEGER(C_SIZE_T) FUNCTION H5_SIZEOF_DP(a) - IMPLICIT NONE - REAL(dp), INTENT(in):: a - - H5_SIZEOF_DP = storage_size(a, c_size_t)/storage_size(c_char_'a',c_size_t) - - END FUNCTION H5_SIZEOF_DP - -END MODULE TH5_MISC_PROVISIONAL diff --git a/fortran/test/tf_F90.f90 b/fortran/test/tf_F90.f90 deleted file mode 100644 index 11a047c..0000000 --- a/fortran/test/tf_F90.f90 +++ /dev/null @@ -1,33 +0,0 @@ -!****h* root/fortran/test/tf_F90.f90 -! -! NAME -! tf_F90.f90 -! -! FUNCTION -! Module for when the compiler is not F2003 or F2008 compliant. -! Needed by tf.f90 for the test programs. -! -! COPYRIGHT -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -!***** -MODULE TH5_MISC_PROVISIONAL - IMPLICIT NONE - - INTEGER, PARAMETER :: sp = KIND(0.0) - INTEGER, PARAMETER :: dp = KIND(0.D0) - -END MODULE TH5_MISC_PROVISIONAL diff --git a/fortran/testpar/Makefile.in b/fortran/testpar/Makefile.in index f16dfff..073194a 100644 --- a/fortran/testpar/Makefile.in +++ b/fortran/testpar/Makefile.in @@ -114,7 +114,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = parallel_test$(EXEEXT) @@ -140,7 +141,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS) LTFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS) @@ -448,14 +449,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -465,13 +473,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -513,6 +520,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/Makefile.in b/hl/Makefile.in index 60c9453..b5fbb46 100644 --- a/hl/Makefile.in +++ b/hl/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -452,14 +453,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -469,13 +477,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -517,6 +524,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/c++/Makefile.in b/hl/c++/Makefile.in index 278f97b..831dadc 100644 --- a/hl/c++/Makefile.in +++ b/hl/c++/Makefile.in @@ -106,7 +106,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -448,14 +449,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -465,13 +473,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -513,6 +520,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/c++/examples/Makefile.in b/hl/c++/examples/Makefile.in index 5bad31f..67a14ca 100644 --- a/hl/c++/examples/Makefile.in +++ b/hl/c++/examples/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-hlc++-ex.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -395,14 +396,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -412,13 +420,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -460,6 +467,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/c++/src/Makefile.in b/hl/c++/src/Makefile.in index 8099607..31de50a 100644 --- a/hl/c++/src/Makefile.in +++ b/hl/c++/src/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -165,7 +166,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -451,14 +452,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -468,13 +476,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -516,6 +523,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/c++/test/Makefile.in b/hl/c++/test/Makefile.in index b7d7d09..4f88242 100644 --- a/hl/c++/test/Makefile.in +++ b/hl/c++/test/Makefile.in @@ -107,7 +107,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = ptableTest$(EXEEXT) @@ -132,7 +133,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -448,14 +449,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -465,13 +473,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -513,6 +520,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/examples/Makefile.in b/hl/examples/Makefile.in index f0bf099..ccf2308 100644 --- a/hl/examples/Makefile.in +++ b/hl/examples/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-hlc-ex.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -395,14 +396,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -412,13 +420,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -460,6 +467,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/fortran/Makefile.in b/hl/fortran/Makefile.in index 4651579..6d87e82 100644 --- a/hl/fortran/Makefile.in +++ b/hl/fortran/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -452,14 +453,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -469,13 +477,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -517,6 +524,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/fortran/examples/Makefile.in b/hl/fortran/examples/Makefile.in index e229f12..71e70dd 100644 --- a/hl/fortran/examples/Makefile.in +++ b/hl/fortran/examples/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = run-hlfortran-ex.sh CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -395,14 +396,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -412,13 +420,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -460,6 +467,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/fortran/src/H5DSfc.c b/hl/fortran/src/H5DSfc.c index 1de3fff..af054e0 100644 --- a/hl/fortran/src/H5DSfc.c +++ b/hl/fortran/src/H5DSfc.c @@ -35,7 +35,7 @@ *------------------------------------------------------------------------- */ int_f -nh5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen) +h5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen) { char *c_dimname = NULL; int_f ret_value = 0; @@ -61,7 +61,7 @@ nh5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen) return ret_value; -} /* end nh5dsset_scale_c() */ +} /* end h5dsset_scale_c() */ /*------------------------------------------------------------------------- @@ -80,7 +80,7 @@ nh5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen) *------------------------------------------------------------------------- */ int_f -nh5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) +h5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) { int_f ret_value = 0; @@ -94,7 +94,7 @@ nh5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) done: return ret_value; -} /* end nh5dsattach_scale_c() */ +} /* end h5dsattach_scale_c() */ /*------------------------------------------------------------------------- @@ -113,7 +113,7 @@ nh5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) *------------------------------------------------------------------------- */ int_f -nh5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) +h5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) { int_f ret_value = 0; @@ -127,7 +127,7 @@ nh5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) done: return ret_value; -} /* end nh5dsdetach_scale_c() */ +} /* end h5dsdetach_scale_c() */ /*------------------------------------------------------------------------- @@ -146,7 +146,7 @@ nh5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx) *------------------------------------------------------------------------- */ int_f -nh5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached) +h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached) { int_f ret_value = 0; htri_t c_is_attached; @@ -163,7 +163,7 @@ nh5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached) done: return ret_value; -} /* end nh5dsis_attached_c() */ +} /* end h5dsis_attached_c() */ /*------------------------------------------------------------------------- * Function: H5DSis_scale_c @@ -181,7 +181,7 @@ nh5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *is_attached) *------------------------------------------------------------------------- */ int_f -nh5dsis_scale_c( hid_t_f *did, int_f *is_scale) +h5dsis_scale_c( hid_t_f *did, int_f *is_scale) { int_f ret_value = 0; htri_t c_is_scale; @@ -198,7 +198,7 @@ nh5dsis_scale_c( hid_t_f *did, int_f *is_scale) done: return ret_value; -} /* end nh5dsis_scale_c() */ +} /* end h5dsis_scale_c() */ /*------------------------------------------------------------------------- @@ -217,7 +217,7 @@ nh5dsis_scale_c( hid_t_f *did, int_f *is_scale) *------------------------------------------------------------------------- */ int_f -nh5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen) +h5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen) { char *c_label = NULL; int_f ret_value = 0; @@ -242,7 +242,7 @@ nh5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen) return ret_value; -} /* end nh5dsset_label_c() */ +} /* end h5dsset_label_c() */ /*------------------------------------------------------------------------- * Function: h5dsget_label_c @@ -260,7 +260,7 @@ nh5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen) *------------------------------------------------------------------------- */ int_f -nh5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size) +h5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size) { char *c_label = NULL; ssize_t size_c = -1; @@ -291,7 +291,7 @@ done: if(c_label) HDfree(c_label); return ret_value; -} /* end nh5dsget_label_c() */ +} /* end h5dsget_label_c() */ /*------------------------------------------------------------------------- * Function: h5dsget_scale_name_c @@ -309,7 +309,7 @@ done: *------------------------------------------------------------------------- */ int_f -nh5dsget_scale_name_c(hid_t_f *did, _fcd name, size_t_f *size) +h5dsget_scale_name_c(hid_t_f *did, _fcd name, size_t_f *size) { char *c_scale_name = NULL; ssize_t size_c = -1; @@ -338,7 +338,7 @@ done: if(c_scale_name) HDfree(c_scale_name); return ret_value; -} /* end nh5dsget_scale_name_c() */ +} /* end h5dsget_scale_name_c() */ /*------------------------------------------------------------------------- * Function: H5DSget_num_scales_c @@ -356,7 +356,7 @@ done: *------------------------------------------------------------------------- */ int_f -nh5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales) +h5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales) { int_f ret_value = 0; @@ -370,4 +370,4 @@ nh5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales) done: return ret_value; -} /* end nh5dsget_num_scales_c() */ +} /* end h5dsget_num_scales_c() */ diff --git a/hl/fortran/src/H5DSff.F90 b/hl/fortran/src/H5DSff.F90 new file mode 100644 index 0000000..00cf4d8 --- /dev/null +++ b/hl/fortran/src/H5DSff.F90 @@ -0,0 +1,518 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains FORTRAN90 interfaces for H5DS functions +! + +MODULE h5ds + + USE, INTRINSIC :: ISO_C_BINDING, ONLY : C_PTR, C_CHAR, C_FLOAT, C_DOUBLE, C_LOC, C_CHAR + USE h5fortran_types + USE hdf5 + +CONTAINS + +!------------------------------------------------------------------------- +! Function: H5DSset_scale_f +! +! Purpose: Convert dataset dsid to a dimension scale, with optional name, dimname. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 17, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSset_scale_f( dsid, errcode, dimname) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsset_scale_f +!DEC$endif +! + + INTEGER(hid_t), INTENT(in) :: dsid ! The dataset to be made a Dimension Scale + CHARACTER(LEN=*), INTENT(in), OPTIONAL :: dimname ! The dimension name + INTEGER :: errcode ! Error code + + INTEGER(SIZE_T) :: dimname_len ! length of dimname (if present) + + INTERFACE + INTEGER FUNCTION H5DSset_scale_c(dsid, dimname, dimname_len) & + BIND(C,NAME='h5dsset_scale_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: dsid ! The dataset to be made a Dimension Scale + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dimname ! The dimension name + INTEGER(SIZE_T), INTENT(in) :: dimname_len + END FUNCTION H5DSset_scale_c + END INTERFACE + + IF(PRESENT(dimname))THEN + dimname_len = LEN(dimname) + errcode = H5DSset_scale_c(dsid, dimname, dimname_len ) + ELSE + errcode = H5DSset_scale_c(dsid, " ", INT(0,SIZE_T) ) + ENDIF + + END SUBROUTINE H5DSset_scale_f + +!------------------------------------------------------------------------- +! Function: H5DSattach_scale_f +! +! Purpose: Attach dimension scale dsid to dimension idx of dataset did. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 17, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSattach_scale_f( did, dsid, idx, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsattach_scale_f +!DEC$endif +! + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached + INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. + INTEGER :: errcode ! error code + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSattach_scale_c(did, dsid, idx) & + BIND(C,NAME='h5dsattach_scale_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached + INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. + END FUNCTION H5DSattach_scale_c + END INTERFACE + + c_idx = idx -1 ! account for C-dimensions starting at 0 + + errcode = H5DSattach_scale_c( did, dsid, c_idx) + + END SUBROUTINE H5DSattach_scale_f + +!------------------------------------------------------------------------- +! Function: H5DSdetach_scale_f +! +! Purpose: Detach dimension scale dsid from the dimension idx of Dataset did. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 17, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSdetach_scale_f( did, dsid, idx, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsdetach_scale_f +!DEC$endif +! + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER , INTENT(in) :: idx ! the dimension of did to detach + INTEGER :: errcode ! error code + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSdetach_scale_c(did, dsid, idx) & + BIND(C,NAME='h5dsdetach_scale_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER , INTENT(in) :: idx ! the dimension of did to detach + END FUNCTION H5DSdetach_scale_c + END INTERFACE + + c_idx = idx - 1 ! account for C-dimensions starting at 0 + + errcode = H5DSdetach_scale_c( did, dsid, c_idx) + + END SUBROUTINE H5DSdetach_scale_f + + +!------------------------------------------------------------------------- +! Function: H5DSis_attached_f +! +! Purpose: Report if dimension scale dsid is currently attached to dimension idx of dataset did. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 17, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSis_attached_f( did, dsid, idx, is_attached, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsis_attached_f +!DEC$endif +! + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached + INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with + LOGICAL , INTENT(out) :: is_attached ! logical: dimension scale dsid is currently attached to + ! dimension idx of dataset did + INTEGER :: errcode ! error code + INTEGER :: c_is_attached + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSis_attached_c(did, dsid, idx, c_is_attached) & + BIND(C,NAME='h5dsis_attached_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached + INTEGER , INTENT(in) :: idx ! the dimension of did to detach + INTEGER , INTENT(out) :: c_is_attached ! dimension scale dsid is currently attached to + END FUNCTION H5DSis_attached_c + END INTERFACE + + c_idx = idx - 1 ! account for C-dimensions starting at 0 + + errcode = H5DSis_attached_c(did, dsid, c_idx, c_is_attached) + + is_attached = .FALSE. ! default + IF(c_is_attached.GT.0)THEN + is_attached = .TRUE. + ELSE IF(errcode.LT.0)THEN + errcode = -1 + ENDIF + + END SUBROUTINE H5DSis_attached_f + +! +! H5DSiterate_scales: Impliment in F2003 +! + +!------------------------------------------------------------------------- +! Function: H5DSis_scale_f +! +! Purpose: Determines whether dset is a Dimension Scale. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 18, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSis_scale_f( did, is_scale, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsis_scale_f +!DEC$endif +! + INTEGER(hid_t), INTENT(in) :: did ! the data set to query + LOGICAL , INTENT(out) :: is_scale ! logical: + ! .TRUE. if did is a Dimension Scale + INTEGER :: errcode ! error code + INTEGER :: c_is_scale + + INTERFACE + INTEGER FUNCTION H5DSis_scale_c(did,c_is_scale) & + BIND(C,NAME='h5dsis_scale_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did + INTEGER, INTENT(out) :: c_is_scale + END FUNCTION H5DSis_scale_c + END INTERFACE + + errcode = H5DSis_scale_c(did, c_is_scale) + + is_scale = .FALSE. ! default + IF(c_is_scale.GT.0)THEN + is_scale = .TRUE. + ELSE IF(errcode.LT.0)THEN + errcode = -1 + ENDIF + + END SUBROUTINE H5DSis_scale_f + +!------------------------------------------------------------------------- +! Function: H5DSset_label_f +! +! Purpose: Set label for the dimension idx of did to the value label +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 18, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSset_label_f( did, idx, label, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsset_label_f +!DEC$endif +! + + INTEGER(hid_t), INTENT(in) :: did ! The dataset + INTEGER , INTENT(in) :: idx ! The dimension + CHARACTER(LEN=*), INTENT(in) :: label ! The label + INTEGER :: errcode ! Error code + + INTEGER(SIZE_T) :: label_len ! Length of label + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSset_label_c(did, idx, label, label_len) & + BIND(C,NAME='h5dsset_label_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! The dataset + INTEGER , INTENT(in) :: idx ! The dimension + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: label ! The label + INTEGER(SIZE_T), INTENT(in) :: label_len ! Length of label + END FUNCTION H5DSset_label_c + END INTERFACE + + c_idx = idx - 1 + + label_len = LEN(label) + errcode = H5DSset_label_c(did, c_idx, label, label_len) + + END SUBROUTINE H5DSset_label_f + +!------------------------------------------------------------------------- +! Function: H5DSget_label_f +! +! Purpose: Read the label for dimension idx of did into buffer label. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 18, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSget_label_f( did, idx, label, size, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsget_label_f +!DEC$endif +! + + INTEGER(hid_t), INTENT(in) :: did ! The dataget + INTEGER , INTENT(in) :: idx ! The dimension + CHARACTER(LEN=*), INTENT(in) :: label ! The label + INTEGER(size_t) , INTENT(inout) :: size ! The length of the label buffer + INTEGER :: errcode ! Error code + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSget_label_c(did, idx, label, size) & + BIND(C,NAME='h5dsget_label_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! The dataget + INTEGER , INTENT(in) :: idx ! The dimension + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: label ! The label + INTEGER(SIZE_T), INTENT(inout) :: size ! Length of label + END FUNCTION H5DSget_label_c + END INTERFACE + + c_idx = idx - 1 + + errcode = H5DSget_label_c(did, c_idx, label, size) + + END SUBROUTINE H5DSget_label_f + + +!------------------------------------------------------------------------- +! Function: H5DSget_scale_name_f +! +! Purpose: Read the name of scale did into buffer name. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 18, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSget_scale_name_f(did, name, size, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsget_scale_name_f +!DEC$endif +! + + INTEGER(hid_t), INTENT(in) :: did ! The dataget + CHARACTER(LEN=*), INTENT(out) :: name ! The name + INTEGER(size_t) , INTENT(inout) :: size ! The length of the name buffer + INTEGER :: errcode ! Error code + + INTERFACE + INTEGER FUNCTION H5DSget_scale_name_c(did, name, size) & + bind(c,name='h5dsget_scale_name_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! The dataget + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(out) :: name ! The name + INTEGER(SIZE_T), INTENT(inout) :: size ! Length of name + END FUNCTION H5DSget_scale_name_c + END INTERFACE + + errcode = H5DSget_scale_name_c(did, name, size) + + END SUBROUTINE H5DSget_scale_name_f + +!------------------------------------------------------------------------- +! Function: H5DSget_num_scales_f +! +! Purpose: Determines how many Dimension Scales are attached to dimension idx of did +! +! Return: Success: 0, Failure: -1 +! +! Programmer: M. Scot Breitenfeld +! +! Date: April 18, 2011 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE H5DSget_num_scales_f( did, idx, num_scales, errcode) + + IMPLICIT NONE + +! +!This definition is needed for Windows DLLs +!DEC$if defined(BUILD_HDF5_HL_DLL) +!DEC$attributes dllexport :: h5dsget_num_scales_f +!DEC$endif +! + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER , INTENT(in) :: idx ! the dimension of did to query + INTEGER , INTENT(out) :: num_scales ! the number of Dimension Scales associated with did + INTEGER :: errcode ! error code + INTEGER :: c_idx + + INTERFACE + INTEGER FUNCTION H5DSget_num_scales_c(did, idx, num_scales) & + BIND(C,NAME='h5dsget_num_scales_c') + IMPORT :: HID_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: did ! the dataset + INTEGER , INTENT(in) :: idx ! the dimension of did to query + INTEGER , INTENT(out) :: num_scales ! the number of Dimension Scales associated with did + END FUNCTION H5DSget_num_scales_c + END INTERFACE + + c_idx = idx - 1 + errcode = H5DSget_num_scales_c(did, c_idx, num_scales) + + END SUBROUTINE H5DSget_num_scales_f + +END MODULE h5ds + + + + + + diff --git a/hl/fortran/src/H5DSff.f90 b/hl/fortran/src/H5DSff.f90 deleted file mode 100644 index 04540a6..0000000 --- a/hl/fortran/src/H5DSff.f90 +++ /dev/null @@ -1,545 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains FORTRAN90 interfaces for H5DS functions -! - -MODULE h5ds - - USE h5fortran_types - USE hdf5 - -CONTAINS - - -!------------------------------------------------------------------------- -! Function: H5DSset_scale_f -! -! Purpose: Convert dataset dsid to a dimension scale, with optional name, dimname. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 17, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSset_scale_f( dsid, errcode, dimname) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsset_scale_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: dsid ! The dataset to be made a Dimension Scale - CHARACTER(LEN=*), INTENT(in), OPTIONAL :: dimname ! The dimension name - INTEGER :: errcode ! Error code - - INTEGER(SIZE_T) :: dimname_len ! length of dimname (if present) - - INTERFACE - INTEGER FUNCTION H5DSset_scale_c(dsid, dimname, dimname_len ) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSSET_SCALE_C'::h5dsset_scale_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dimname - INTEGER(hid_t), INTENT(in) :: dsid ! The dataset to be made a Dimension Scale - CHARACTER(LEN=*), INTENT(in) :: dimname ! The dimension name - INTEGER(SIZE_T), INTENT(in) :: dimname_len - END FUNCTION H5DSset_scale_c - END INTERFACE - - IF(PRESENT(dimname))THEN - dimname_len = LEN(dimname) - errcode = H5DSset_scale_c(dsid, dimname, dimname_len ) - ELSE - errcode = H5DSset_scale_c(dsid, " ", INT(0,SIZE_T) ) - ENDIF - - END SUBROUTINE H5DSset_scale_f - -!------------------------------------------------------------------------- -! Function: H5DSattach_scale_f -! -! Purpose: Attach dimension scale dsid to dimension idx of dataset did. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 17, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSattach_scale_f( did, dsid, idx, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsattach_scale_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached - INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. - INTEGER :: errcode ! error code - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSattach_scale_c(did, dsid, idx ) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSATTACH_SCALE_C':: h5dsattach_scale_c - !DEC$ENDIF - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached - INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with. - END FUNCTION H5DSattach_scale_c - END INTERFACE - - c_idx = idx -1 ! account for C-dimensions starting at 0 - - errcode = H5DSattach_scale_c( did, dsid, c_idx) - - END SUBROUTINE H5DSattach_scale_f - -!------------------------------------------------------------------------- -! Function: H5DSdetach_scale_f -! -! Purpose: Detach dimension scale dsid from the dimension idx of Dataset did. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 17, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSdetach_scale_f( did, dsid, idx, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsdetach_scale_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached - INTEGER , INTENT(in) :: idx ! the dimension of did to detach - INTEGER :: errcode ! error code - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSdetach_scale_c(did, dsid, idx ) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSDETACH_SCALE_C':: h5dsdetach_scale_c - !DEC$ENDIF - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached - INTEGER , INTENT(in) :: idx ! the dimension of did to detach - END FUNCTION H5DSdetach_scale_c - END INTERFACE - - c_idx = idx - 1 ! account for C-dimensions starting at 0 - - errcode = H5DSdetach_scale_c( did, dsid, c_idx) - - END SUBROUTINE H5DSdetach_scale_f - - -!------------------------------------------------------------------------- -! Function: H5DSis_attached_f -! -! Purpose: Report if dimension scale dsid is currently attached to dimension idx of dataset did. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 17, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSis_attached_f( did, dsid, idx, is_attached, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsis_attached_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be attached - INTEGER , INTENT(in) :: idx ! the dimension of did that dsid is associated with - LOGICAL , INTENT(out) :: is_attached ! logical: dimension scale dsid is currently attached to - ! dimension idx of dataset did - INTEGER :: errcode ! error code - INTEGER :: c_is_attached - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSis_attached_c(did, dsid, idx, c_is_attached ) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSIS_ATTACHED_C':: h5dsis_attached_c - !DEC$ENDIF - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER(hid_t), INTENT(in) :: dsid ! the scale to be detached - INTEGER , INTENT(in) :: idx ! the dimension of did to detach - INTEGER , INTENT(out) :: c_is_attached ! dimension scale dsid is currently attached to - END FUNCTION H5DSis_attached_c - END INTERFACE - - c_idx = idx - 1 ! account for C-dimensions starting at 0 - - errcode = H5DSis_attached_c(did, dsid, c_idx, c_is_attached) - - is_attached = .FALSE. ! default - IF(c_is_attached.GT.0)THEN - is_attached = .TRUE. - ELSE IF(errcode.LT.0)THEN - errcode = -1 - ENDIF - - END SUBROUTINE H5DSis_attached_f - -! -! H5DSiterate_scales: Impliment in F2003 -! - -!------------------------------------------------------------------------- -! Function: H5DSis_scale_f -! -! Purpose: Determines whether dset is a Dimension Scale. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 18, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSis_scale_f( did, is_scale, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsis_scale_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: did ! the data set to query - LOGICAL , INTENT(out) :: is_scale ! logical: - ! .TRUE. if did is a Dimension Scale - INTEGER :: errcode ! error code - INTEGER :: c_is_scale - - INTERFACE - INTEGER FUNCTION H5DSis_scale_c(did,c_is_scale) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSIS_SCALE_C':: h5dsis_scale_c - !DEC$ENDIF - INTEGER(hid_t), INTENT(in) :: did ! the data set to query - INTEGER, INTENT(out) :: c_is_scale - END FUNCTION H5DSis_scale_c - END INTERFACE - - errcode = H5DSis_scale_c(did, c_is_scale) - - is_scale = .FALSE. ! default - IF(c_is_scale.GT.0)THEN - is_scale = .TRUE. - ELSE IF(errcode.LT.0)THEN - errcode = -1 - ENDIF - - END SUBROUTINE H5DSis_scale_f - -!------------------------------------------------------------------------- -! Function: H5DSset_label_f -! -! Purpose: Set label for the dimension idx of did to the value label -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 18, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSset_label_f( did, idx, label, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsset_label_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: did ! The dataset - INTEGER , INTENT(in) :: idx ! The dimension - CHARACTER(LEN=*), INTENT(in) :: label ! The label - INTEGER :: errcode ! Error code - - INTEGER(SIZE_T) :: label_len ! Length of label - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSset_label_c(did, idx, label, label_len) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSSET_LABEL_C'::h5dsset_label_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: label - INTEGER(hid_t), INTENT(in) :: did ! The dataset - INTEGER , INTENT(in) :: idx ! The dimension - CHARACTER(LEN=*), INTENT(in) :: label ! The label - INTEGER(SIZE_T), INTENT(in) :: label_len ! Length of label - END FUNCTION H5DSset_label_c - END INTERFACE - - c_idx = idx - 1 - - label_len = LEN(label) - errcode = H5DSset_label_c(did, c_idx, label, label_len) - - END SUBROUTINE H5DSset_label_f - -!------------------------------------------------------------------------- -! Function: H5DSget_label_f -! -! Purpose: Read the label for dimension idx of did into buffer label. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 18, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSget_label_f( did, idx, label, size, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsget_label_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: did ! The dataget - INTEGER , INTENT(in) :: idx ! The dimension - CHARACTER(LEN=*), INTENT(in) :: label ! The label - INTEGER(size_t) , INTENT(inout) :: size ! The length of the label buffer - INTEGER :: errcode ! Error code - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSget_label_c(did, idx, label, size) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSGET_LABEL_C'::h5dsget_label_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: label - INTEGER(hid_t), INTENT(in) :: did ! The dataget - INTEGER , INTENT(in) :: idx ! The dimension - CHARACTER(LEN=*), INTENT(in) :: label ! The label - INTEGER(SIZE_T), INTENT(inout) :: size ! Length of label - END FUNCTION H5DSget_label_c - END INTERFACE - - c_idx = idx - 1 - - errcode = H5DSget_label_c(did, c_idx, label, size) - - END SUBROUTINE H5DSget_label_f - - -!------------------------------------------------------------------------- -! Function: H5DSget_scale_name_f -! -! Purpose: Read the name of scale did into buffer name. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 18, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSget_scale_name_f(did, name, size, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsget_scale_name_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: did ! The dataget - CHARACTER(LEN=*), INTENT(out) :: name ! The name - INTEGER(size_t) , INTENT(inout) :: size ! The length of the name buffer - INTEGER :: errcode ! Error code - - INTERFACE - INTEGER FUNCTION H5DSget_scale_name_c(did, name, size) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSGET_SCALE_NAME_C'::h5dsget_scale_name_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: name - INTEGER(hid_t), INTENT(in) :: did ! The dataget - CHARACTER(LEN=*), INTENT(out) :: name ! The name - INTEGER(SIZE_T), INTENT(inout) :: size ! Length of name - END FUNCTION H5DSget_scale_name_c - END INTERFACE - - errcode = H5DSget_scale_name_c(did, name, size) - - END SUBROUTINE H5DSget_scale_name_f - -!------------------------------------------------------------------------- -! Function: H5DSget_num_scales_f -! -! Purpose: Determines how many Dimension Scales are attached to dimension idx of did -! -! Return: Success: 0, Failure: -1 -! -! Programmer: M. Scot Breitenfeld -! -! Date: April 18, 2011 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - SUBROUTINE H5DSget_num_scales_f( did, idx, num_scales, errcode) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5dsget_num_scales_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER , INTENT(in) :: idx ! the dimension of did to query - INTEGER , INTENT(out) :: num_scales ! the number of Dimension Scales associated with did - INTEGER :: errcode ! error code - INTEGER :: c_idx - - INTERFACE - INTEGER FUNCTION H5DSget_num_scales_c(did, idx, num_scales) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5DSGET_NUM_SCALES_C':: h5dsget_num_scales_c - !DEC$ENDIF - INTEGER(hid_t), INTENT(in) :: did ! the dataset - INTEGER , INTENT(in) :: idx ! the dimension of did to query - INTEGER , INTENT(out) :: num_scales ! the number of Dimension Scales associated with did - END FUNCTION H5DSget_num_scales_c - END INTERFACE - - c_idx = idx - 1 - errcode = H5DSget_num_scales_c(did, c_idx, num_scales) - - END SUBROUTINE H5DSget_num_scales_f - -END MODULE h5ds - - - - - - diff --git a/hl/fortran/src/H5HL_buildiface.F90 b/hl/fortran/src/H5HL_buildiface.F90 new file mode 100644 index 0000000..0e85e27 --- /dev/null +++ b/hl/fortran/src/H5HL_buildiface.F90 @@ -0,0 +1,683 @@ +!****p* Program/H5HL_buildiface +! +! NAME +! Executable: H5HL_buildiface +! +! FILE +! fortran/src/H5HL_buildiface.f90 +! +! PURPOSE +! This stand alone program is used at build time to generate the program +! H5HL_gen.f90. It cycles through all the available KIND parameters for +! integers and reals. The appropriate program and subroutines are then generated +! depending on which of the KIND values are found. +! +! NOTES +! This program uses the Fortran 2008 intrinsic function STORAGE_SIZE or SIZEOF +! depending on availablity.It generates code that makes use of +! STORAGE_SIZE/SIZEOF in H5fortran_detect.f90. STORAGE_SIZE is standard +! compliant and should always be chosen over SIZEOF. +! +! The availability of STORAGE_SIZE/SIZEOF is checked at configure time and the TRUE/FALSE +! condition is set in the configure variable "FORTRAN_HAVE_STORAGE_SIZE" or +! "FORTRAN_HAVE_SIZEOF". +! +! The use of C_SIZOF(X) is not used since the argument X must be an interoperable +! data entity. +! +! COPYRIGHT +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! AUTHOR +! M. Scot Breitenfeld +! +!***** + +#include + +PROGRAM H5HL_buildiface + USE, INTRINSIC :: ISO_C_BINDING + IMPLICIT NONE + +! These values are valid REAL KINDs (with corresponding C float) found during configure + H5_H5CONFIG_F_NUM_RKIND + H5_H5CONFIG_F_RKIND +! These values are valid INTEGER KINDs (with corresponding C float) found during configure + H5_H5CONFIG_F_NUM_IKIND + H5_H5CONFIG_F_IKIND + + INTEGER :: i, j, k + INTEGER :: ji, jr, jd +#ifdef H5_FORTRAN_HAVE_C_LONG_DOUBLE + REAL(KIND=C_LONG_DOUBLE) :: c_longdble +#endif + REAL(KIND=C_DOUBLE) :: c_dble + REAL(KIND=C_FLOAT) :: c_flt + INTEGER :: sizeof_var + CHARACTER(LEN=2) :: chr2 +! subroutine rank of array being passed in + CHARACTER(LEN=2), DIMENSION(1:8), PARAMETER :: chr_rank=(/"_0","_1","_2","_3","_4","_5","_6","_7"/) +! rank definitions + CHARACTER(LEN=70), DIMENSION(1:8), PARAMETER :: rank_dim_line=(/ & + ' ', & + ', DIMENSION(dims(1)) ', & + ', DIMENSION(dims(1),dims(2)) ', & + ', DIMENSION(dims(1),dims(2),dims(3)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) ', & + ', DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7))' & + /) +! pointer to the buffer + CHARACTER(LEN=37), DIMENSION(1:8), PARAMETER :: f_ptr_line=(/ & + ' f_ptr = C_LOC(buf) ', & + ' f_ptr = C_LOC(buf(1)) ', & + ' f_ptr = C_LOC(buf(1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1)) ', & + ' f_ptr = C_LOC(buf(1,1,1,1,1,1,1))' & + /) + +! Generate Fortran H5LT* interfaces having multiple KIND interfaces. +! +! Developer's notes: +! +! Only interfaces with arrays of rank 7 and less are provided. Even-though the F2008 +! standard extended the maximum rank to 15, it was decided that they should use the +! new APIs to handle those use cases. Handling rank 7 and less is for backward compatibility +! with the Fortran 90/95 APIs codes which could never handle rank 8-15 array sizes. + + OPEN(11,FILE='H5LTff_gen.F90') + WRITE(11,'(40(A,/))') & +'!****h* ROBODoc/H5LTff_gen.F90',& +'!',& +'! NAME',& +'! H5LTff_gen',& +'! ',& +'! PURPOSE',& +'! This module is generated at build by H5HL_buildiface.F90 to handle all the',& +'! detected REAL/INTEGER KINDs for APIs being passed those KINDs. Currently these ',& +'! are H5LT and H5TB APIs',& +'!',& +'! COPYRIGHT',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'! Copyright by The HDF Group. *',& +'! All rights reserved. *',& +'! *',& +'! This file is part of HDF5. The full HDF5 copyright notice, including *',& +'! terms governing use, modification, and redistribution, is contained in *',& +'! the files COPYING and Copyright.html. COPYING can be found at the root *',& +'! of the source code distribution tree; Copyright.html can be found at the *',& +'! root level of an installed copy of the electronic HDF5 document set and *',& +'! is linked from the top-level documents page. It can also be found at *',& +'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& +'! access to either file, you may request a copy from help@hdfgroup.org. *',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'!',& +'! AUTHOR',& +'! H5HL_buildiface.F90',& +'!',& +'!*****' + + WRITE(11,'(a)') "MODULE H5LT" + + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' USE h5fortran_types' + WRITE(11,'(A)') ' USE H5LT_CONST' + WRITE(11,'(A)') ' IMPLICIT NONE' +!*************** +! H5LT INTERFACES +!*************** +! +! H5LTmake_dataset_f +! + WRITE(11,'(A)') " INTERFACE h5ltmake_dataset_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltread_dataset_f + WRITE(11,'(A)') " INTERFACE h5ltread_dataset_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_real_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltmake_dataset_float_f + WRITE(11,'(A)') " INTERFACE h5ltmake_dataset_float_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_float_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltmake_dataset_double_f + WRITE(11,'(A)') " INTERFACE h5ltmake_dataset_double_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltmake_dataset_double_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltread_dataset_float_f + WRITE(11,'(A)') " INTERFACE h5ltread_dataset_float_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_float_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5ltread_dataset_double_f + WRITE(11,'(A)') " INTERFACE h5ltread_dataset_double_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + DO k = 1, 8 + WRITE(11,'(A)') " MODULE PROCEDURE h5ltread_dataset_double_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + ENDDO + END DO + WRITE(11,'(A)') " END INTERFACE" + + WRITE(11,'(A)') 'CONTAINS' + +!********************** +! H5LT APIs +!********************** +! +! h5ltmake_dataset_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_real_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltmake_dataset_real_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,type_id,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(IN) :: rank' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: type_id' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltmake_dataset_real_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltread_dataset_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_real_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltread_dataset_real_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,type_id,buf,dims,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: type_id' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltread_dataset_real_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltmake_dataset_float_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_float_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltmake_dataset_float_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(IN) :: rank' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltmake_dataset_float_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltread_dataset_float_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_float_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltread_dataset_float_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,buf,dims,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltread_dataset_float_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltmake_dataset_double_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltmake_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltmake_dataset_double_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,rank,dims,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(IN) :: rank' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltmake_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + +! h5ltread_dataset_double_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + DO j = 1, 8 + +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5ltread_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5ltread_dataset_double_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,buf,dims,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN)'//TRIM(rank_dim_line(j))//', TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5ltread_dataset_double_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + ENDDO + + WRITE(11,'(A)') 'END MODULE H5LT' ! change this to be generic MSB + + CLOSE(11) + +! Generate Fortran H5TB* interfaces having multiple KIND interfaces. + + + OPEN(11,FILE='H5TBff_gen.F90') + WRITE(11,'(40(A,/))') & +'!****h* ROBODoc/H5TBff_gen.F90',& +'!',& +'! NAME',& +'! H5TBff_gen',& +'! ',& +'! PURPOSE',& +'! This module is generated at build by H5HL_buildiface.F90 to handle all the',& +'! detected REAL/INTEGER KINDs for APIs being passed those KINDs. Currently these ',& +'! are H5LT and H5TB APIs',& +'!',& +'! COPYRIGHT',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'! Copyright by The HDF Group. *',& +'! All rights reserved. *',& +'! *',& +'! This file is part of HDF5. The full HDF5 copyright notice, including *',& +'! terms governing use, modification, and redistribution, is contained in *',& +'! the files COPYING and Copyright.html. COPYING can be found at the root *',& +'! of the source code distribution tree; Copyright.html can be found at the *',& +'! root level of an installed copy of the electronic HDF5 document set and *',& +'! is linked from the top-level documents page. It can also be found at *',& +'! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *',& +'! access to either file, you may request a copy from help@hdfgroup.org. *',& +'! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *',& +'!',& +'! AUTHOR',& +'! H5HL_buildiface.F90',& +'!',& +'!*****' + + WRITE(11,'(a)') "MODULE H5TB" + + WRITE(11,'(A)') ' USE, INTRINSIC :: ISO_C_BINDING' + WRITE(11,'(A)') ' USE h5fortran_types' + WRITE(11,'(A)') ' USE H5TB_CONST' + WRITE(11,'(A)') ' IMPLICIT NONE' + +!*************** +! H5TB INTERFACES +!*************** + +! h5tbwrite_field_name_f + WRITE(11,'(A)') " INTERFACE h5tbwrite_field_name_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + k =2 + WRITE(11,'(A)') " MODULE PROCEDURE h5tbwrite_field_name_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5tbread_field_name_f + WRITE(11,'(A)') " INTERFACE h5tbread_field_name_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + k = 2 + WRITE(11,'(A)') " MODULE PROCEDURE h5tbread_field_name_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5tbwrite_field_index_f + WRITE(11,'(A)') " INTERFACE h5tbwrite_field_index_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + k = 2 + WRITE(11,'(A)') " MODULE PROCEDURE h5tbwrite_field_index_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5tbread_field_index_f + WRITE(11,'(A)') " INTERFACE h5tbread_field_index_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + k = 2 + WRITE(11,'(A)') " MODULE PROCEDURE h5tbread_field_index_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + +! h5tbinsert_field_f + WRITE(11,'(A)') " INTERFACE h5tbinsert_field_f" + DO i = 1, num_rkinds + j = rkind(i) + WRITE(chr2,'(I2)') j + k = 2 + WRITE(11,'(A)') " MODULE PROCEDURE h5tbinsert_field_kind_"//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(k) + END DO + WRITE(11,'(A)') " END INTERFACE" + + WRITE(11,'(A)') 'CONTAINS' + + !********************** + ! H5TB APIs + !********************** + + ! h5tbwrite_field_name_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + j = 2 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5tbwrite_field_name_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5tbwrite_field_name_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,field_name,start, nrecords,type_size,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(in) :: field_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: start' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: nrecords' + WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' namelen1 = LEN(field_name)' + WRITE(11,'(A)') & + ' errcode = h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,start,nrecords,type_size,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5tbwrite_field_name_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + + ! h5tbread_field_name_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + j = 2 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5tbread_field_name_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5tbread_field_name_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,field_name,start, nrecords,type_size,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(in) :: field_name' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: start' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: nrecords' + WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' namelen1 = LEN(field_name)' + WRITE(11,'(A)') & + ' errcode = h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,start,nrecords,type_size,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5tbread_field_name_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + + ! h5tbwrite_field_index_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + j = 2 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5tbwrite_field_index_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5tbwrite_field_index_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,field_index,start, nrecords,type_size,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(in) :: field_index' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: start' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: nrecords' + WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') & + ' errcode = h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,start,nrecords,type_size,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5tbwrite_field_index_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + + ! h5tbread_field_index_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + j = 2 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5tbread_field_index_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5tbread_field_index_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,field_index,start, nrecords,type_size,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t) , INTENT(IN) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(IN) :: dset_name' + WRITE(11,'(A)') ' INTEGER, INTENT(in) :: field_index' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: start' + WRITE(11,'(A)') ' INTEGER(hsize_t), INTENT(in) :: nrecords' + WRITE(11,'(A)') ' INTEGER(size_t), INTENT(in) :: type_size' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'),INTENT(IN), DIMENSION(*), TARGET :: buf' + WRITE(11,'(A)') ' INTEGER :: errcode ' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') & + ' errcode = h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,start,nrecords,type_size,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5tbread_field_index_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + + ! h5tbinsert_field_f + DO i = 1, num_rkinds + k = rkind(i) + WRITE(chr2,'(I2)') k + j = 2 +! DLL definitions for windows + WRITE(11,'(A)') '!DEC$if defined(BUILD_HDF5_HL_DLL)' + WRITE(11,'(A)') '!DEC$attributes dllexport :: h5tbinsert_field_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + WRITE(11,'(A)') '!DEC$endif' + +! Subroutine API + WRITE(11,'(A)') ' SUBROUTINE h5tbinsert_field_kind_'//TRIM(ADJUSTL(chr2))& + &//'_rank'//chr_rank(j)//'(loc_id,dset_name,field_name,field_type,field_index,buf,errcode)' + WRITE(11,'(A)') ' IMPLICIT NONE' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: loc_id' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(in) :: dset_name' + WRITE(11,'(A)') ' CHARACTER(LEN=*), INTENT(in) :: field_name' + WRITE(11,'(A)') ' INTEGER(hid_t), INTENT(in) :: field_type' + WRITE(11,'(A)') ' INTEGER, INTENT(in) :: field_index' + WRITE(11,'(A)') ' REAL(KIND='//TRIM(ADJUSTL(chr2))//'), INTENT(in), DIMENSION(*), TARGET :: buf' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen' + WRITE(11,'(A)') ' INTEGER(size_t) :: namelen1' + WRITE(11,'(A)') ' INTEGER :: errcode' + WRITE(11,'(A)') ' TYPE(C_PTR) :: f_ptr' + + WRITE(11,'(A)') f_ptr_line(j) + WRITE(11,'(A)') ' namelen = LEN(dset_name)' + WRITE(11,'(A)') ' namelen1 = LEN(field_name)' + WRITE(11,'(A)') & + ' errcode = h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,field_type,field_index,f_ptr)' + WRITE(11,'(A)') ' END SUBROUTINE h5tbinsert_field_kind_'//TRIM(ADJUSTL(chr2))//'_rank'//chr_rank(j) + ENDDO + + WRITE(11,'(A)') 'END MODULE H5TB' + + CLOSE(11) + +END PROGRAM H5HL_buildiface + + + diff --git a/hl/fortran/src/H5IMfc.c b/hl/fortran/src/H5IMfc.c index 6acd410..7ad50d6 100644 --- a/hl/fortran/src/H5IMfc.c +++ b/hl/fortran/src/H5IMfc.c @@ -39,7 +39,7 @@ */ int_f -nh5immake_image_8bit_c (hid_t_f *loc_id, +h5immake_image_8bit_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *width, @@ -100,7 +100,7 @@ done: */ int_f -nh5imread_image_c (hid_t_f *loc_id, +h5imread_image_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *buf) @@ -153,7 +153,7 @@ done: */ int_f -nh5immake_image_24bit_c (hid_t_f *loc_id, +h5immake_image_24bit_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -222,7 +222,7 @@ done: */ int_f -nh5imget_image_info_c(hid_t_f *loc_id, +h5imget_image_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *width, @@ -307,7 +307,7 @@ done: */ int_f -nh5imis_image_c(hid_t_f *loc_id, +h5imis_image_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name) { @@ -356,7 +356,7 @@ nh5imis_image_c(hid_t_f *loc_id, */ int_f -nh5immake_palette_c (hid_t_f *loc_id, +h5immake_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *dims, @@ -411,7 +411,7 @@ done: */ int_f -nh5imlink_palette_c (hid_t_f *loc_id, +h5imlink_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -476,7 +476,7 @@ done: */ int_f -nh5imunlink_palette_c (hid_t_f *loc_id, +h5imunlink_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -542,7 +542,7 @@ done: */ int_f -nh5imget_npalettes_c(hid_t_f *loc_id, +h5imget_npalettes_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *npals) @@ -604,7 +604,7 @@ done: int_f -nh5imget_palette_info_c(hid_t_f *loc_id, +h5imget_palette_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *pal_number, @@ -671,7 +671,7 @@ done: int_f -nh5imget_palette_c(hid_t_f *loc_id, +h5imget_palette_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *pal_number, @@ -729,7 +729,7 @@ done: */ int_f -nh5imis_palette_c(hid_t_f *loc_id, +h5imis_palette_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name) { diff --git a/hl/fortran/src/H5IMff.F90 b/hl/fortran/src/H5IMff.F90 new file mode 100644 index 0000000..4408dda --- /dev/null +++ b/hl/fortran/src/H5IMff.F90 @@ -0,0 +1,667 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains FORTRAN interfaces for H5IM functions +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new function here then you MUST add the function name to the +! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. +! This is needed for Windows based operating systems. +! + +MODULE h5im + USE, INTRINSIC :: ISO_C_BINDING + USE h5fortran_types + USE hdf5 +CONTAINS + +!------------------------------------------------------------------------- +! Function: h5immake_image_8bit_f +! +! Purpose: Creates and writes an image an 8 bit image +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5immake_image_8bit_f(loc_id,& + dset_name,& + width,& + height,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: width ! width of image + INTEGER(hsize_t), INTENT(in) :: height ! height of image + INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5immake_image_8bit_c(loc_id,namelen,dset_name,width,height,buf) & + BIND(C,NAME='h5immake_image_8bit_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: width ! width of image + INTEGER(hsize_t), INTENT(in) :: height ! height of image + INTEGER , INTENT(in), DIMENSION(*) :: buf ! buffer + END FUNCTION h5immake_image_8bit_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5immake_image_8bit_c(loc_id,namelen,dset_name,width,height,buf) + + END SUBROUTINE h5immake_image_8bit_f + +!------------------------------------------------------------------------- +! Function: h5imread_image_f +! +! Purpose: Reads image data from disk. +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + SUBROUTINE h5imread_image_f(loc_id,& + dset_name,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imread_image_c(loc_id,namelen,dset_name,buf) & + BIND(C,NAME='h5imread_image_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer + END FUNCTION h5imread_image_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imread_image_c(loc_id,namelen,dset_name,buf) + + END SUBROUTINE h5imread_image_f + +!------------------------------------------------------------------------- +! Function: h5immake_image_24bit_f +! +! Purpose: Creates and writes an image a 24 bit image +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5immake_image_24bit_f(loc_id,& + dset_name,& + width,& + height,& + il,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: width ! width of image + INTEGER(hsize_t), INTENT(in) :: height ! height of image + CHARACTER(len=*), INTENT(in) :: il ! interlace + INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + + INTERFACE + INTEGER FUNCTION h5immake_image_24bit_c(loc_id,namelen,dset_name,ILEN,il,width,height,buf) & + BIND(C,NAME='h5immake_image_24bit_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: width ! width of image + INTEGER(hsize_t), INTENT(in) :: height ! height of image + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: il ! interlace + INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: ILEN ! name length + + END FUNCTION h5immake_image_24bit_c + END INTERFACE + + namelen = LEN(dset_name) + ILEN = LEN(il) + errcode = h5immake_image_24bit_c(loc_id,namelen,dset_name,ILEN,il,width,height,buf) + + END SUBROUTINE h5immake_image_24bit_f + +!------------------------------------------------------------------------- +! Function: h5imget_image_info_f +! +! Purpose: Gets information about an image dataset (dimensions, interlace mode +! and number of associated palettes). +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imget_image_info_f(loc_id,& + dset_name,& + width,& + height,& + planes,& + interlace,& + npals,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout) :: width ! width of image + INTEGER(hsize_t), INTENT(inout) :: height ! height of image + INTEGER(hsize_t), INTENT(inout) :: planes ! color planes + INTEGER(hsize_t), INTENT(inout) :: npals ! palettes + CHARACTER(len=*), INTENT(inout) :: interlace ! interlace + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + + INTERFACE + INTEGER FUNCTION h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ILEN,interlace) & + BIND(C,NAME='h5imget_image_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout) :: width ! width of image + INTEGER(hsize_t), INTENT(inout) :: height ! height of image + INTEGER(hsize_t), INTENT(inout) :: planes ! color planes + INTEGER(hsize_t), INTENT(inout) :: npals ! palettes + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(inout) :: interlace ! interlace + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + END FUNCTION h5imget_image_info_c + END INTERFACE + + namelen = LEN(dset_name) + ILEN = LEN(interlace) + errcode = h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ILEN,interlace) + + END SUBROUTINE h5imget_image_info_f + +!------------------------------------------------------------------------- +! Function: h5imis_image_f +! +! Purpose: Inquires if a dataset is an image +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + INTEGER FUNCTION h5imis_image_f(loc_id,& + dset_name) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imis_image_c(loc_id,namelen,dset_name) & + BIND(C,NAME='h5imis_image_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + END FUNCTION h5imis_image_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imis_image_c(loc_id,namelen,dset_name) + h5imis_image_f = errcode + + END FUNCTION h5imis_image_f + + +!------------------------------------------------------------------------- +! Function: h5immake_palette_f +! +! Purpose: Creates and writes a palette +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5immake_palette_f(loc_id,& + dset_name,& + pal_dims,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in), DIMENSION(*) :: pal_dims ! dimensions + INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) & + BIND(C,NAME='h5immake_palette_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in), DIMENSION(*) :: pal_dims ! dimensions + INTEGER, INTENT(in), DIMENSION(*) :: buf ! buffer + END FUNCTION h5immake_palette_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) + + END SUBROUTINE h5immake_palette_f + +!------------------------------------------------------------------------- +! Function: h5imlink_palette_f +! +! Purpose: This function attaches a palette to an existing image dataset +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imlink_palette_f(loc_id,& + dset_name,& + pal_name,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(len=*), INTENT(in) :: pal_name ! palette name + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + + INTERFACE + INTEGER FUNCTION h5imlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) & + BIND(C,NAME='h5imlink_palette_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: pal_name ! palette name + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + END FUNCTION h5imlink_palette_c + END INTERFACE + + namelen = LEN(dset_name) + ILEN = LEN(pal_name) + errcode = h5imlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) + + END SUBROUTINE h5imlink_palette_f + + +!------------------------------------------------------------------------- +! Function: h5imunlink_palette_f +! +! Purpose: This function dettaches a palette to an existing image dataset +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imunlink_palette_f(loc_id,& + dset_name,& + pal_name,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(len=*), INTENT(in) :: pal_name ! palette name + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + + INTERFACE + INTEGER FUNCTION h5imunlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) & + BIND(C,NAME='h5imunlink_palette_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: pal_name ! palette name + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: ILEN ! name length + END FUNCTION h5imunlink_palette_c + END INTERFACE + + namelen = LEN(dset_name) + ILEN = LEN(pal_name) + errcode = h5imunlink_palette_c(loc_id,namelen,dset_name,ILEN,pal_name) + + END SUBROUTINE h5imunlink_palette_f + +!------------------------------------------------------------------------- +! Function: h5imget_npalettes_f +! +! Purpose: Gets the number of palettes associated to an image +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 05, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imget_npalettes_f(loc_id,& + dset_name,& + npals,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout) :: npals ! palettes + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imget_npalettes_c(loc_id,namelen,dset_name,npals) & + BIND(C,NAME='h5imget_npalettes_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout) :: npals ! palettes + INTEGER(size_t) :: namelen ! name length + END FUNCTION h5imget_npalettes_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imget_npalettes_c(loc_id,namelen,dset_name,npals) + + END SUBROUTINE h5imget_npalettes_f + + +!------------------------------------------------------------------------- +! Function: h5imget_palette_info_f +! +! Purpose: Get palette information +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imget_palette_info_f(loc_id,& + dset_name,& + pal_number,& + dims,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: pal_number ! palette number + INTEGER(hsize_t), DIMENSION(*), INTENT(inout) :: dims ! dimensions + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) & + BIND(C,NAME='h5imget_palette_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: pal_number ! palette number + INTEGER(hsize_t), DIMENSION(*), INTENT(inout) :: dims ! dimensions + INTEGER(size_t) :: namelen ! name length + END FUNCTION h5imget_palette_info_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) + + END SUBROUTINE h5imget_palette_info_f + +!------------------------------------------------------------------------- +! Function: h5imget_palette_f +! +! Purpose: Reads palette +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5imget_palette_f(loc_id,& + dset_name,& + pal_number,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: pal_number ! palette number + INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) & + BIND(C,NAME='h5imget_palette_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: pal_number ! palette number + INTEGER, INTENT(inout), DIMENSION(*) :: buf ! buffer + END FUNCTION h5imget_palette_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) + + END SUBROUTINE h5imget_palette_f + + +!------------------------------------------------------------------------- +! Function: h5imis_palette_f +! +! Purpose: Inquires if a dataset is a palette +! +! Return: true, false, fail +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + INTEGER FUNCTION h5imis_palette_f(loc_id,& + dset_name) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5imis_palette_c(loc_id,namelen,dset_name) & + BIND(C,NAME='h5imis_palette_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + END FUNCTION h5imis_palette_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5imis_palette_c(loc_id,namelen,dset_name) + h5imis_palette_f = errcode + + END FUNCTION h5imis_palette_f + +END MODULE H5IM + + + + + diff --git a/hl/fortran/src/H5IMff.f90 b/hl/fortran/src/H5IMff.f90 deleted file mode 100644 index 50c6d8b..0000000 --- a/hl/fortran/src/H5IMff.f90 +++ /dev/null @@ -1,783 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains FORTRAN90 interfaces for H5IM functions -! - -module h5im -use h5fortran_types -use hdf5 -contains - - -!------------------------------------------------------------------------- -! Function: h5immake_image_8bit_f -! -! Purpose: Creates and writes an image an 8 bit image -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5immake_image_8bit_f(loc_id,& - dset_name,& - width,& - height,& - buf,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5immake_image_8bit_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in) :: width ! width of image - integer(hsize_t), intent(in) :: height ! height of image - integer, intent(in), dimension(*) :: buf ! buffer - integer :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - interface - integer function h5immake_image_8bit_c(loc_id,namelen,dset_name,width,height,buf) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMMAKE_IMAGE_8BIT_C'::h5immake_image_8bit_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in) :: width ! width of image - integer(hsize_t), intent(in) :: height ! height of image - integer , intent(in), dimension(*) :: buf ! buffer - end function h5immake_image_8bit_c - end interface - - namelen = len(dset_name) - errcode = h5immake_image_8bit_c(loc_id,namelen,dset_name,width,height,buf) - -end subroutine h5immake_image_8bit_f - - - -!------------------------------------------------------------------------- -! Function: h5imread_image_f -! -! Purpose: Reads image data from disk. -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - -subroutine h5imread_image_f(loc_id,& - dset_name,& - buf,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imread_image_f -!DEC$endif -! - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(inout), dimension(*) :: buf ! buffer - integer :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - interface - integer function h5imread_image_c(loc_id,namelen,dset_name,buf) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMREAD_IMAGE_C'::h5imread_image_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(inout), dimension(*) :: buf ! buffer - end function h5imread_image_c - end interface - - namelen = len(dset_name) - errcode = h5imread_image_c(loc_id,namelen,dset_name,buf) - -end subroutine h5imread_image_f - - -!------------------------------------------------------------------------- -! Function: h5immake_image_24bit_f -! -! Purpose: Creates and writes an image a 24 bit image -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5immake_image_24bit_f(loc_id,& - dset_name,& - width,& - height,& - il,& - buf,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5immake_image_24bit_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in) :: width ! width of image - integer(hsize_t), intent(in) :: height ! height of image - character(len=*), intent(in) :: il ! interlace - integer, intent(in), dimension(*) :: buf ! buffer - integer :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - - interface - integer function h5immake_image_24bit_c(loc_id,namelen,dset_name,ilen,il,width,height,buf) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMMAKE_IMAGE_24BIT_C'::h5immake_image_24bit_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: il - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in) :: width ! width of image - integer(hsize_t), intent(in) :: height ! height of image - character(len=*), intent(in) :: il ! interlace - integer, intent(in), dimension(*) :: buf ! buffer - integer(size_t) :: namelen ! length of name buffer - integer(size_t) :: ilen ! name length - - end function h5immake_image_24bit_c - end interface - - namelen = len(dset_name) - ilen = len(il) - errcode = h5immake_image_24bit_c(loc_id,namelen,dset_name,ilen,il,width,height,buf) - -end subroutine h5immake_image_24bit_f - - -!------------------------------------------------------------------------- -! Function: h5imget_image_info_f -! -! Purpose: Gets information about an image dataset (dimensions, interlace mode -! and number of associated palettes). -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5imget_image_info_f(loc_id,& - dset_name,& - width,& - height,& - planes,& - interlace,& - npals,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imget_image_info_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(inout) :: width ! width of image - integer(hsize_t), intent(inout) :: height ! height of image - integer(hsize_t), intent(inout) :: planes ! color planes - integer(hsize_t), intent(inout) :: npals ! palettes - character(len=*), intent(inout) :: interlace ! interlace - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - - interface - integer function h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ilen,interlace) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMGET_IMAGE_INFO_C'::h5imget_image_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: interlace - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(inout) :: width ! width of image - integer(hsize_t), intent(inout) :: height ! height of image - integer(hsize_t), intent(inout) :: planes ! color planes - integer(hsize_t), intent(inout) :: npals ! palettes - character(len=*), intent(inout) :: interlace ! interlace - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - end function h5imget_image_info_c - end interface - - namelen = len(dset_name) - ilen = len(interlace) - errcode = h5imget_image_info_c(loc_id,namelen,dset_name,width,height,planes,npals,ilen,interlace) - -end subroutine h5imget_image_info_f - - -!------------------------------------------------------------------------- -! Function: h5imis_image_f -! -! Purpose: Inquires if a dataset is an image -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -integer function h5imis_image_f(loc_id,& - dset_name) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imis_image_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5imis_image_c(loc_id,namelen,dset_name) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMIS_IMAGE_C'::h5imis_image_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - end function h5imis_image_c - end interface - - namelen = len(dset_name) - errcode = h5imis_image_c(loc_id,namelen,dset_name) - h5imis_image_f = errcode - -end function h5imis_image_f - - -!------------------------------------------------------------------------- -! Function: h5immake_palette_f -! -! Purpose: Creates and writes a palette -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5immake_palette_f(loc_id,& - dset_name,& - pal_dims,& - buf,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5immake_palette_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in), dimension(*) :: pal_dims ! dimensions - integer, intent(in), dimension(*) :: buf ! buffer - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMMAKE_PALETTE_C'::h5immake_palette_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(in), dimension(*) :: pal_dims ! dimensions - integer, intent(in), dimension(*) :: buf ! buffer - end function h5immake_palette_c - end interface - - namelen = len(dset_name) - errcode = h5immake_palette_c(loc_id,namelen,dset_name,pal_dims,buf) - -end subroutine h5immake_palette_f - - - -!------------------------------------------------------------------------- -! Function: h5imlink_palette_f -! -! Purpose: This function attaches a palette to an existing image dataset -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5imlink_palette_f(loc_id,& - dset_name,& - pal_name,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imlink_palette_f -!DEC$endif -! - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - character(len=*), intent(in) :: pal_name ! palette name - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - - interface - integer function h5imlink_palette_c(loc_id,namelen,dset_name,ilen,pal_name) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMLINK_PALETTE_C'::h5imlink_palette_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: pal_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - character(len=*), intent(in) :: pal_name ! palette name - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - end function h5imlink_palette_c - end interface - - namelen = len(dset_name) - ilen = len(pal_name) - errcode = h5imlink_palette_c(loc_id,namelen,dset_name,ilen,pal_name) - -end subroutine h5imlink_palette_f - - -!------------------------------------------------------------------------- -! Function: h5imunlink_palette_f -! -! Purpose: This function dettaches a palette to an existing image dataset -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5imunlink_palette_f(loc_id,& - dset_name,& - pal_name,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imunlink_palette_f -!DEC$endif -! - - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - character(len=*), intent(in) :: pal_name ! palette name - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - - interface - integer function h5imunlink_palette_c(loc_id,namelen,dset_name,ilen,pal_name) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMUNLINK_PALETTE_C'::h5imunlink_palette_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: pal_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - character(len=*), intent(in) :: pal_name ! palette name - integer(size_t) :: namelen ! name length - integer(size_t) :: ilen ! name length - end function h5imunlink_palette_c - end interface - - namelen = len(dset_name) - ilen = len(pal_name) - errcode = h5imunlink_palette_c(loc_id,namelen,dset_name,ilen,pal_name) - -end subroutine h5imunlink_palette_f - - - -!------------------------------------------------------------------------- -! Function: h5imget_npalettes_f -! -! Purpose: Gets the number of palettes associated to an image -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 05, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5imget_npalettes_f(loc_id,& - dset_name,& - npals,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imget_npalettes_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(inout) :: npals ! palettes - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5imget_npalettes_c(loc_id,namelen,dset_name,npals) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMGET_NPALETTES_C'::h5imget_npalettes_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer(hsize_t), intent(inout) :: npals ! palettes - integer(size_t) :: namelen ! name length - end function h5imget_npalettes_c - end interface - - namelen = len(dset_name) - errcode = h5imget_npalettes_c(loc_id,namelen,dset_name,npals) - -end subroutine h5imget_npalettes_f - - -!------------------------------------------------------------------------- -! Function: h5imget_palette_info_f -! -! Purpose: Get palette information -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -subroutine h5imget_palette_info_f(loc_id,& - dset_name,& - pal_number,& - dims,& - errcode ) - - implicit none - - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imget_palette_info_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(in) :: pal_number ! palette number - integer(hsize_t), dimension(*), intent(inout) :: dims ! dimensions - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMGET_PALETTE_INFO_C'::h5imget_palette_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(in) :: pal_number ! palette number - integer(hsize_t), dimension(*), intent(inout) :: dims ! dimensions - integer(size_t) :: namelen ! name length - end function h5imget_palette_info_c - end interface - - namelen = len(dset_name) - errcode = h5imget_palette_info_c(loc_id,namelen,dset_name,pal_number,dims) - -end subroutine h5imget_palette_info_f - - - -!------------------------------------------------------------------------- -! Function: h5imget_palette_f -! -! Purpose: Reads palette -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - - -subroutine h5imget_palette_f(loc_id,& - dset_name,& - pal_number,& - buf,& - errcode ) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imget_palette_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(in) :: pal_number ! palette number - integer, intent(inout), dimension(*) :: buf ! buffer - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMGET_PALETTE_C'::h5imget_palette_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - integer, intent(in) :: pal_number ! palette number - integer, intent(inout), dimension(*) :: buf ! buffer - end function h5imget_palette_c - end interface - - namelen = len(dset_name) - errcode = h5imget_palette_c(loc_id,namelen,dset_name,pal_number,buf) - -end subroutine h5imget_palette_f - - -!------------------------------------------------------------------------- -! Function: h5imis_palette_f -! -! Purpose: Inquires if a dataset is a palette -! -! Return: true, false, fail -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -integer function h5imis_palette_f(loc_id,& - dset_name) - - implicit none - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5imis_palette_f -!DEC$endif -! - - integer(hid_t), intent(in) :: loc_id ! file or group identifier - character(len=*), intent(in) :: dset_name ! name of the dataset - integer :: errcode ! error code - integer(size_t) :: namelen ! name length - - interface - integer function h5imis_palette_c(loc_id,namelen,dset_name) - use h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5IMIS_PALETTE_C'::h5imis_palette_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - integer(hid_t), intent(in) :: loc_id ! file or group identifier - integer(size_t) :: namelen ! length of name buffer - character(len=*), intent(in) :: dset_name ! name of the dataset - end function h5imis_palette_c - end interface - - namelen = len(dset_name) - errcode = h5imis_palette_c(loc_id,namelen,dset_name) - h5imis_palette_f = errcode - -end function h5imis_palette_f - - -! end -! -end module H5IM - - - - - diff --git a/hl/fortran/src/H5LTf90proto.h b/hl/fortran/src/H5LTf90proto.h index 532d9d8..20d043e 100644 --- a/hl/fortran/src/H5LTf90proto.h +++ b/hl/fortran/src/H5LTf90proto.h @@ -30,1131 +30,110 @@ H5_FCDLL void HD5packFstring (char *src, char *dest, size_t len); /* * Functions from H5DSfc.c */ - -#define nh5dsset_scale_c H5_FC_FUNC_(h5dsset_scale_c, H5DSSET_SCALE_C) -#define nh5dsattach_scale_c H5_FC_FUNC_(h5dsattach_scale_c, H5DSATTACH_SCALE_C) -#define nh5dsdetach_scale_c H5_FC_FUNC_(h5dsdetach_scale_c, H5DSDETACH_SCALE_C) -#define nh5dsis_attached_c H5_FC_FUNC_(h5dsis_attached_c, H5DSIS_ATTACHED_C) -#define nh5dsis_scale_c H5_FC_FUNC_(h5dsis_scale_c, H5DSIS_SCALE_C) -#define nh5dsset_label_c H5_FC_FUNC_(h5dsset_label_c, H5DSSET_LABEL_C) -#define nh5dsget_label_c H5_FC_FUNC_(h5dsget_label_c, H5DSGET_LABEL_C) -#define nh5dsget_scale_name_c H5_FC_FUNC_(h5dsget_scale_name_c,H5DSGET_SCALE_NAME_C) -#define nh5dsget_num_scales_c H5_FC_FUNC_(h5dsget_num_scales_c,H5DSGET_NUM_SCALES_C) - - -/* - * Functions from H5LTfc.c - */ -#define nh5ltmake_dataset_c H5_FC_FUNC_(h5ltmake_dataset_c, H5LTMAKE_DATASET_C) -#define nh5ltmake_dataset_int1_c H5_FC_FUNC_(h5ltmake_dataset_int1_c, H5LTMAKE_DATASET_INT1_C) -#define nh5ltmake_dataset_int2_c H5_FC_FUNC_(h5ltmake_dataset_int2_c, H5LTMAKE_DATASET_INT2_C) -#define nh5ltmake_dataset_int3_c H5_FC_FUNC_(h5ltmake_dataset_int3_c, H5LTMAKE_DATASET_INT3_C) -#define nh5ltmake_dataset_int4_c H5_FC_FUNC_(h5ltmake_dataset_int4_c, H5LTMAKE_DATASET_INT4_C) -#define nh5ltmake_dataset_int5_c H5_FC_FUNC_(h5ltmake_dataset_int5_c, H5LTMAKE_DATASET_INT5_C) -#define nh5ltmake_dataset_int6_c H5_FC_FUNC_(h5ltmake_dataset_int6_c, H5LTMAKE_DATASET_INT6_C) -#define nh5ltmake_dataset_int7_c H5_FC_FUNC_(h5ltmake_dataset_int7_c, H5LTMAKE_DATASET_INT7_C) -#define nh5ltmake_dataset_fl1_c H5_FC_FUNC_(h5ltmake_dataset_fl1_c, H5LTMAKE_DATASET_FL1_C) -#define nh5ltmake_dataset_fl2_c H5_FC_FUNC_(h5ltmake_dataset_fl2_c, H5LTMAKE_DATASET_FL2_C) -#define nh5ltmake_dataset_fl3_c H5_FC_FUNC_(h5ltmake_dataset_fl3_c, H5LTMAKE_DATASET_FL3_C) -#define nh5ltmake_dataset_fl4_c H5_FC_FUNC_(h5ltmake_dataset_fl4_c, H5LTMAKE_DATASET_FL4_C) -#define nh5ltmake_dataset_fl5_c H5_FC_FUNC_(h5ltmake_dataset_fl5_c, H5LTMAKE_DATASET_FL5_C) -#define nh5ltmake_dataset_fl6_c H5_FC_FUNC_(h5ltmake_dataset_fl6_c, H5LTMAKE_DATASET_FL6_C) -#define nh5ltmake_dataset_fl7_c H5_FC_FUNC_(h5ltmake_dataset_fl7_c, H5LTMAKE_DATASET_FL7_C) -#define nh5ltmake_dataset_dl1_c H5_FC_FUNC_(h5ltmake_dataset_dl1_c, H5LTMAKE_DATASET_DL1_C) -#define nh5ltmake_dataset_dl2_c H5_FC_FUNC_(h5ltmake_dataset_dl2_c, H5LTMAKE_DATASET_DL2_C) -#define nh5ltmake_dataset_dl3_c H5_FC_FUNC_(h5ltmake_dataset_dl3_c, H5LTMAKE_DATASET_DL3_C) -#define nh5ltmake_dataset_dl4_c H5_FC_FUNC_(h5ltmake_dataset_dl4_c, H5LTMAKE_DATASET_DL4_C) -#define nh5ltmake_dataset_dl5_c H5_FC_FUNC_(h5ltmake_dataset_dl5_c, H5LTMAKE_DATASET_DL5_C) -#define nh5ltmake_dataset_dl6_c H5_FC_FUNC_(h5ltmake_dataset_dl6_c, H5LTMAKE_DATASET_DL6_C) -#define nh5ltmake_dataset_dl7_c H5_FC_FUNC_(h5ltmake_dataset_dl7_c, H5LTMAKE_DATASET_DL7_C) -#define nh5ltmake_dataset_nint1_c H5_FC_FUNC_(h5ltmake_dataset_nint1_c, H5LTMAKE_DATASET_NINT1_C) -#define nh5ltmake_dataset_nint2_c H5_FC_FUNC_(h5ltmake_dataset_nint2_c, H5LTMAKE_DATASET_NINT2_C) -#define nh5ltmake_dataset_nint3_c H5_FC_FUNC_(h5ltmake_dataset_nint3_c, H5LTMAKE_DATASET_NINT3_C) -#define nh5ltmake_dataset_nint4_c H5_FC_FUNC_(h5ltmake_dataset_nint4_c, H5LTMAKE_DATASET_NINT4_C) -#define nh5ltmake_dataset_nint5_c H5_FC_FUNC_(h5ltmake_dataset_nint5_c, H5LTMAKE_DATASET_NINT5_C) -#define nh5ltmake_dataset_nint6_c H5_FC_FUNC_(h5ltmake_dataset_nint6_c, H5LTMAKE_DATASET_NINT6_C) -#define nh5ltmake_dataset_nint7_c H5_FC_FUNC_(h5ltmake_dataset_nint7_c, H5LTMAKE_DATASET_NINT7_C) -#define nh5ltmake_dataset_nfl1_c H5_FC_FUNC_(h5ltmake_dataset_nfl1_c, H5LTMAKE_DATASET_NFL1_C) -#define nh5ltmake_dataset_nfl2_c H5_FC_FUNC_(h5ltmake_dataset_nfl2_c, H5LTMAKE_DATASET_NFL2_C) -#define nh5ltmake_dataset_nfl3_c H5_FC_FUNC_(h5ltmake_dataset_nfl3_c, H5LTMAKE_DATASET_NFL3_C) -#define nh5ltmake_dataset_nfl4_c H5_FC_FUNC_(h5ltmake_dataset_nfl4_c, H5LTMAKE_DATASET_NFL4_C) -#define nh5ltmake_dataset_nfl5_c H5_FC_FUNC_(h5ltmake_dataset_nfl5_c, H5LTMAKE_DATASET_NFL5_C) -#define nh5ltmake_dataset_nfl6_c H5_FC_FUNC_(h5ltmake_dataset_nfl6_c, H5LTMAKE_DATASET_NFL6_C) -#define nh5ltmake_dataset_nfl7_c H5_FC_FUNC_(h5ltmake_dataset_nfl7_c, H5LTMAKE_DATASET_NFL7_C) -#define nh5ltmake_dataset_ndl1_c H5_FC_FUNC_(h5ltmake_dataset_ndl1_c, H5LTMAKE_DATASET_NDL1_C) -#define nh5ltmake_dataset_ndl2_c H5_FC_FUNC_(h5ltmake_dataset_ndl2_c, H5LTMAKE_DATASET_NDL2_C) -#define nh5ltmake_dataset_ndl3_c H5_FC_FUNC_(h5ltmake_dataset_ndl3_c, H5LTMAKE_DATASET_NDL3_C) -#define nh5ltmake_dataset_ndl4_c H5_FC_FUNC_(h5ltmake_dataset_ndl4_c, H5LTMAKE_DATASET_NDL4_C) -#define nh5ltmake_dataset_ndl5_c H5_FC_FUNC_(h5ltmake_dataset_ndl5_c, H5LTMAKE_DATASET_NDL5_C) -#define nh5ltmake_dataset_ndl6_c H5_FC_FUNC_(h5ltmake_dataset_ndl6_c, H5LTMAKE_DATASET_NDL6_C) -#define nh5ltmake_dataset_ndl7_c H5_FC_FUNC_(h5ltmake_dataset_ndl7_c, H5LTMAKE_DATASET_NDL7_C) -#define nh5ltread_dataset_c H5_FC_FUNC_(h5ltread_dataset_c, H5LTREAD_DATASET_C) -#define nh5ltread_dataset_int1_c H5_FC_FUNC_(h5ltread_dataset_int1_c, H5LTREAD_DATASET_INT1_C) -#define nh5ltread_dataset_int2_c H5_FC_FUNC_(h5ltread_dataset_int2_c, H5LTREAD_DATASET_INT2_C) -#define nh5ltread_dataset_int3_c H5_FC_FUNC_(h5ltread_dataset_int3_c, H5LTREAD_DATASET_INT3_C) -#define nh5ltread_dataset_int4_c H5_FC_FUNC_(h5ltread_dataset_int4_c, H5LTREAD_DATASET_INT4_C) -#define nh5ltread_dataset_int5_c H5_FC_FUNC_(h5ltread_dataset_int5_c, H5LTREAD_DATASET_INT5_C) -#define nh5ltread_dataset_int6_c H5_FC_FUNC_(h5ltread_dataset_int6_c, H5LTREAD_DATASET_INT6_C) -#define nh5ltread_dataset_int7_c H5_FC_FUNC_(h5ltread_dataset_int7_c, H5LTREAD_DATASET_INT7_C) -#define nh5ltread_dataset_fl1_c H5_FC_FUNC_(h5ltread_dataset_fl1_c, H5LTREAD_DATASET_FL1_C) -#define nh5ltread_dataset_fl2_c H5_FC_FUNC_(h5ltread_dataset_fl2_c, H5LTREAD_DATASET_FL2_C) -#define nh5ltread_dataset_fl3_c H5_FC_FUNC_(h5ltread_dataset_fl3_c, H5LTREAD_DATASET_FL3_C) -#define nh5ltread_dataset_fl4_c H5_FC_FUNC_(h5ltread_dataset_fl4_c, H5LTREAD_DATASET_FL4_C) -#define nh5ltread_dataset_fl5_c H5_FC_FUNC_(h5ltread_dataset_fl5_c, H5LTREAD_DATASET_FL5_C) -#define nh5ltread_dataset_fl6_c H5_FC_FUNC_(h5ltread_dataset_fl6_c, H5LTREAD_DATASET_FL6_C) -#define nh5ltread_dataset_fl7_c H5_FC_FUNC_(h5ltread_dataset_fl7_c, H5LTREAD_DATASET_FL7_C) -#define nh5ltread_dataset_dl1_c H5_FC_FUNC_(h5ltread_dataset_dl1_c, H5LTREAD_DATASET_DL1_C) -#define nh5ltread_dataset_dl2_c H5_FC_FUNC_(h5ltread_dataset_dl2_c, H5LTREAD_DATASET_DL2_C) -#define nh5ltread_dataset_dl3_c H5_FC_FUNC_(h5ltread_dataset_dl3_c, H5LTREAD_DATASET_DL3_C) -#define nh5ltread_dataset_dl4_c H5_FC_FUNC_(h5ltread_dataset_dl4_c, H5LTREAD_DATASET_DL4_C) -#define nh5ltread_dataset_dl5_c H5_FC_FUNC_(h5ltread_dataset_dl5_c, H5LTREAD_DATASET_DL5_C) -#define nh5ltread_dataset_dl6_c H5_FC_FUNC_(h5ltread_dataset_dl6_c, H5LTREAD_DATASET_DL6_C) -#define nh5ltread_dataset_dl7_c H5_FC_FUNC_(h5ltread_dataset_dl7_c, H5LTREAD_DATASET_DL7_C) -#define nh5ltread_dataset_nint1_c H5_FC_FUNC_(h5ltread_dataset_nint1_c, H5LTREAD_DATASET_NINT1_C) -#define nh5ltread_dataset_nint2_c H5_FC_FUNC_(h5ltread_dataset_nint2_c, H5LTREAD_DATASET_NINT2_C) -#define nh5ltread_dataset_nint3_c H5_FC_FUNC_(h5ltread_dataset_nint3_c, H5LTREAD_DATASET_NINT3_C) -#define nh5ltread_dataset_nint4_c H5_FC_FUNC_(h5ltread_dataset_nint4_c, H5LTREAD_DATASET_NINT4_C) -#define nh5ltread_dataset_nint5_c H5_FC_FUNC_(h5ltread_dataset_nint5_c, H5LTREAD_DATASET_NINT5_C) -#define nh5ltread_dataset_nint6_c H5_FC_FUNC_(h5ltread_dataset_nint6_c, H5LTREAD_DATASET_NINT6_C) -#define nh5ltread_dataset_nint7_c H5_FC_FUNC_(h5ltread_dataset_nint7_c, H5LTREAD_DATASET_NINT7_C) -#define nh5ltread_dataset_nfl1_c H5_FC_FUNC_(h5ltread_dataset_nfl1_c, H5LTREAD_DATASET_NFL1_C) -#define nh5ltread_dataset_nfl2_c H5_FC_FUNC_(h5ltread_dataset_nfl2_c, H5LTREAD_DATASET_NFL2_C) -#define nh5ltread_dataset_nfl3_c H5_FC_FUNC_(h5ltread_dataset_nfl3_c, H5LTREAD_DATASET_NFL3_C) -#define nh5ltread_dataset_nfl4_c H5_FC_FUNC_(h5ltread_dataset_nfl4_c, H5LTREAD_DATASET_NFL4_C) -#define nh5ltread_dataset_nfl5_c H5_FC_FUNC_(h5ltread_dataset_nfl5_c, H5LTREAD_DATASET_NFL5_C) -#define nh5ltread_dataset_nfl6_c H5_FC_FUNC_(h5ltread_dataset_nfl6_c, H5LTREAD_DATASET_NFL6_C) -#define nh5ltread_dataset_nfl7_c H5_FC_FUNC_(h5ltread_dataset_nfl7_c, H5LTREAD_DATASET_NFL7_C) -#define nh5ltread_dataset_ndl1_c H5_FC_FUNC_(h5ltread_dataset_ndl1_c, H5LTREAD_DATASET_NDL1_C) -#define nh5ltread_dataset_ndl2_c H5_FC_FUNC_(h5ltread_dataset_ndl2_c, H5LTREAD_DATASET_NDL2_C) -#define nh5ltread_dataset_ndl3_c H5_FC_FUNC_(h5ltread_dataset_ndl3_c, H5LTREAD_DATASET_NDL3_C) -#define nh5ltread_dataset_ndl4_c H5_FC_FUNC_(h5ltread_dataset_ndl4_c, H5LTREAD_DATASET_NDL4_C) -#define nh5ltread_dataset_ndl5_c H5_FC_FUNC_(h5ltread_dataset_ndl5_c, H5LTREAD_DATASET_NDL5_C) -#define nh5ltread_dataset_ndl6_c H5_FC_FUNC_(h5ltread_dataset_ndl6_c, H5LTREAD_DATASET_NDL6_C) -#define nh5ltread_dataset_ndl7_c H5_FC_FUNC_(h5ltread_dataset_ndl7_c, H5LTREAD_DATASET_NDL7_C) -#define nh5ltmake_dataset_string_c H5_FC_FUNC_(h5ltmake_dataset_string_c, H5LTMAKE_DATASET_STRING_C) -#define nh5ltread_dataset_string_c H5_FC_FUNC_(h5ltread_dataset_string_c, H5LTREAD_DATASET_STRING_C) - -#define nh5ltset_attribute_int_c H5_FC_FUNC_(h5ltset_attribute_int_c, H5LTSET_ATTRIBUTE_INT_C) -#define nh5ltset_attribute_float_c H5_FC_FUNC_(h5ltset_attribute_float_c, H5LTSET_ATTRIBUTE_FLOAT_C) -#define nh5ltset_attribute_double_c H5_FC_FUNC_(h5ltset_attribute_double_c, H5LTSET_ATTRIBUTE_DOUBLE_C) -#define nh5ltset_attribute_string_c H5_FC_FUNC_(h5ltset_attribute_string_c, H5LTSET_ATTRIBUTE_STRING_C) - -#define nh5ltget_attribute_int_c H5_FC_FUNC_(h5ltget_attribute_int_c, H5LTGET_ATTRIBUTE_INT_C) -#define nh5ltget_attribute_float_c H5_FC_FUNC_(h5ltget_attribute_float_c, H5LTGET_ATTRIBUTE_FLOAT_C) -#define nh5ltget_attribute_double_c H5_FC_FUNC_(h5ltget_attribute_double_c, H5LTGET_ATTRIBUTE_DOUBLE_C) -#define nh5ltget_attribute_string_c H5_FC_FUNC_(h5ltget_attribute_string_c, H5LTGET_ATTRIBUTE_STRING_C) - -#define nh5ltget_dataset_ndims_c H5_FC_FUNC_(h5ltget_dataset_ndims_c, H5LTGET_DATASET_NDIMS_C) -#define nh5ltfind_dataset_c H5_FC_FUNC_(h5ltfind_dataset_c, H5LTFIND_DATASET_C) -#define nh5ltget_dataset_info_c H5_FC_FUNC_(h5ltget_dataset_info_c, H5LTGET_DATASET_INFO_C) - -#define nh5ltget_attribute_ndims_c H5_FC_FUNC_(h5ltget_attribute_ndims_c, H5LTGET_ATTRIBUTE_NDIMS_C) -#define nh5ltget_attribute_info_c H5_FC_FUNC_(h5ltget_attribute_info_c, H5LTGET_ATTRIBUTE_INFO_C) -#define nh5ltpath_valid_c H5_FC_FUNC_(h5ltpath_valid_c, H5LTPATH_VALID_C) - -/*------------------------------------------------------------------------- -* Image -*------------------------------------------------------------------------- -*/ -#define nh5immake_image_8bit_c H5_FC_FUNC_(h5immake_image_8bit_c, H5IMMAKE_IMAGE_8BIT_C) -#define nh5immake_image_24bit_c H5_FC_FUNC_(h5immake_image_24bit_c, H5IMMAKE_IMAGE_24BIT_C) -#define nh5imread_image_c H5_FC_FUNC_(h5imread_image_c, H5IMREAD_IMAGE_C) -#define nh5imget_image_info_c H5_FC_FUNC_(h5imget_image_info_c, H5IMGET_IMAGE_INFO_C) -#define nh5imis_image_c H5_FC_FUNC_(h5imis_image_c, H5IMIS_IMAGE_C) -#define nh5immake_palette_c H5_FC_FUNC_(h5immake_palette_c, H5IMMAKE_PALETTE_C) -#define nh5imlink_palette_c H5_FC_FUNC_(h5imlink_palette_c, H5IMLINK_PALETTE_C) -#define nh5imunlink_palette_c H5_FC_FUNC_(h5imunlink_palette_c, H5IMUNLINK_PALETTE_C) -#define nh5imget_npalettes_c H5_FC_FUNC_(h5imget_npalettes_c, H5IMGET_NPALETTES_C) -#define nh5imget_palette_info_c H5_FC_FUNC_(h5imget_palette_info_c, H5IMGET_PALETTE_INFO_C) -#define nh5imget_palette_c H5_FC_FUNC_(h5imget_palette_c, H5IMGET_PALETTE_C) -#define nh5imis_palette_c H5_FC_FUNC_(h5imis_palette_c, H5IMIS_PALETTE_C) - -/*------------------------------------------------------------------------- -* Table -*------------------------------------------------------------------------- -*/ -#define nh5tbmake_table_c H5_FC_FUNC_(h5tbmake_table_c, H5TBMAKE_TABLE_C) -#define nh5tbwrite_field_name_c H5_FC_FUNC_(h5tbwrite_field_name_c, H5TBWRITE_FIELD_NAME_C) -#define nh5tbwrite_field_name_int_c H5_FC_FUNC_(h5tbwrite_field_name_int_c, H5TBWRITE_FIELD_NAME_INT_C) -#define nh5tbwrite_field_name_fl_c H5_FC_FUNC_(h5tbwrite_field_name_fl_c, H5TBWRITE_FIELD_NAME_FL_C) -#define nh5tbwrite_field_name_dl_c H5_FC_FUNC_(h5tbwrite_field_name_dl_c, H5TBWRITE_FIELD_NAME_DL_C) -#define nh5tbwrite_field_name_st_c H5_FC_FUNC_(h5tbwrite_field_name_st_c, H5TBWRITE_FIELD_NAME_ST_C) -#define nh5tbread_field_name_c H5_FC_FUNC_(h5tbread_field_name_c, H5TBREAD_FIELD_NAME_C) -#define nh5tbread_field_name_int_c H5_FC_FUNC_(h5tbread_field_name_int_c, H5TBREAD_FIELD_NAME_INT_C) -#define nh5tbread_field_name_fl_c H5_FC_FUNC_(h5tbread_field_name_fl_c, H5TBREAD_FIELD_NAME_FL_C) -#define nh5tbread_field_name_dl_c H5_FC_FUNC_(h5tbread_field_name_dl_c, H5TBREAD_FIELD_NAME_DL_C) -#define nh5tbread_field_name_st_c H5_FC_FUNC_(h5tbread_field_name_st_c, H5TBREAD_FIELD_NAME_ST_C) -#define nh5tbwrite_field_index_c H5_FC_FUNC_(h5tbwrite_field_index_c, H5TBWRITE_FIELD_INDEX_C) -#define nh5tbwrite_field_index_int_c H5_FC_FUNC_(h5tbwrite_field_index_int_c, H5TBWRITE_FIELD_INDEX_INT_C) -#define nh5tbwrite_field_index_fl_c H5_FC_FUNC_(h5tbwrite_field_index_fl_c, H5TBWRITE_FIELD_INDEX_FL_C) -#define nh5tbwrite_field_index_dl_c H5_FC_FUNC_(h5tbwrite_field_index_dl_c, H5TBWRITE_FIELD_INDEX_DL_C) -#define nh5tbwrite_field_index_st_c H5_FC_FUNC_(h5tbwrite_field_index_st_c, H5TBWRITE_FIELD_INDEX_ST_C) -#define nh5tbread_field_index_c H5_FC_FUNC_(h5tbread_field_index_c, H5TBREAD_FIELD_INDEX_C) -#define nh5tbread_field_index_int_c H5_FC_FUNC_(h5tbread_field_index_int_c, H5TBREAD_FIELD_INDEX_INT_C) -#define nh5tbread_field_index_fl_c H5_FC_FUNC_(h5tbread_field_index_fl_c, H5TBREAD_FIELD_INDEX_FL_C) -#define nh5tbread_field_index_dl_c H5_FC_FUNC_(h5tbread_field_index_dl_c, H5TBREAD_FIELD_INDEX_DL_C) -#define nh5tbread_field_index_st_c H5_FC_FUNC_(h5tbread_field_index_st_c, H5TBREAD_FIELD_INDEX_ST_C) -#define nh5tbinsert_field_c H5_FC_FUNC_(h5tbinsert_field_c, H5TBINSERT_FIELD_C) -#define nh5tbinsert_field_int_c H5_FC_FUNC_(h5tbinsert_field_int_c, H5TBINSERT_FIELD_INT_C) -#define nh5tbinsert_field_fl_c H5_FC_FUNC_(h5tbinsert_field_fl_c, H5TBINSERT_FIELD_FL_C) -#define nh5tbinsert_field_dl_c H5_FC_FUNC_(h5tbinsert_field_dl_c, H5TBINSERT_FIELD_DL_C) -#define nh5tbinsert_field_st_c H5_FC_FUNC_(h5tbinsert_field_st_c, H5TBINSERT_FIELD_ST_C) -#define nh5tbdelete_field_c H5_FC_FUNC_(h5tbdelete_field_c, H5TBDELETE_FIELD_C) -#define nh5tbget_table_info_c H5_FC_FUNC_(h5tbget_table_info_c, H5TBGET_TABLE_INFO_C) -#define nh5tbget_field_info_c H5_FC_FUNC_(h5tbget_field_info_c, H5TBGET_FIELD_INFO_C) - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *c_is_attached); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsis_scale_c(hid_t_f *did, int_f *is_scale); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsget_scale_name_c(hid_t_f *did, _fcd label, size_t_f *size); - -HDF5_HL_F90CSTUBDLL -int_f -nh5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales); - - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_int7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_fl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_dl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nint7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_nfl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltmake_dataset_ndl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_int7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_fl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_dl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nint7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nfl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nfl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nfl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nfl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltread_dataset_nfl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); - HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_nfl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsset_scale_c(hid_t_f *dsid, _fcd dimname, size_t_f *dimnamelen); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_nfl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsattach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsdetach_scale_c( hid_t_f *did, hid_t_f *dsid, int_f *idx); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsis_attached_c( hid_t_f *did, hid_t_f *dsid, int_f *idx, int_f *c_is_attached); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsis_scale_c(hid_t_f *did, int_f *is_scale); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsset_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *labellen); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsget_label_c(hid_t_f *did, int_f *idx, _fcd label, size_t_f *size); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsget_scale_name_c(hid_t_f *did, _fcd label, size_t_f *size); HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_ndl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims); +h5dsget_num_scales_c( hid_t_f *did, int_f *idx, int_f *num_scales); -HDF5_HL_F90CSTUBDLL -int_f -nh5ltset_attribute_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf); +/* + * Functions from H5LTfc.c + */ HDF5_HL_F90CSTUBDLL int_f -nh5ltset_attribute_float_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf); +h5ltmake_dataset_c (hid_t_f *loc_id, + size_t_f *namelen, + _fcd name, + int_f *rank, + hsize_t_f *dims, + hid_t_f *type_id, + void *buf); HDF5_HL_F90CSTUBDLL int_f -nh5ltset_attribute_double_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf); +h5ltread_dataset_c (hid_t_f *loc_id, + size_t_f *namelen, + _fcd name, + hid_t_f *type_id, + void *buf); HDF5_HL_F90CSTUBDLL int_f -nh5ltset_attribute_string_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *buflen, - void *buf); +h5ltset_attribute_c(hid_t_f *loc_id, + size_t_f *namelen, + _fcd dsetname, + size_t_f *attrnamelen, + _fcd attrname, + size_t_f *size, + void *buf, char *dtype, size_t_f *sizeof_val); HDF5_HL_F90CSTUBDLL int_f -nh5ltget_attribute_int_c(hid_t_f *loc_id, +h5ltget_attribute_c(hid_t_f *loc_id, size_t_f *namelen, _fcd dsetname, size_t_f *attrnamelen, _fcd attrname, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltget_attribute_float_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5ltget_attribute_double_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - void *buf); + void *buf, char* dtype, size_t_f *sizeof_val); HDF5_HL_F90CSTUBDLL int_f -nh5ltget_attribute_string_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - _fcd buf, - size_t_f *buf_size); +h5ltget_attribute_string_c(hid_t_f *loc_id, + size_t_f *namelen, + _fcd dsetname, + size_t_f *attrnamelen, + _fcd attrname, + _fcd buf, + size_t_f *buf_size); HDF5_HL_F90CSTUBDLL int_f -nh5ltget_dataset_ndims_c(hid_t_f *loc_id, +h5ltget_dataset_ndims_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *rank); HDF5_HL_F90CSTUBDLL int_f -nh5ltfind_dataset_c(hid_t_f *loc_id, +h5ltfind_dataset_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name); HDF5_HL_F90CSTUBDLL int_f -nh5ltget_dataset_info_c(hid_t_f *loc_id, +h5ltget_dataset_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *dims, @@ -1163,7 +142,7 @@ nh5ltget_dataset_info_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5ltget_attribute_ndims_c(hid_t_f *loc_id, +h5ltget_attribute_ndims_c(hid_t_f *loc_id, size_t_f *namelen, _fcd dsetname, size_t_f *attrnamelen, @@ -1171,7 +150,7 @@ nh5ltget_attribute_ndims_c(hid_t_f *loc_id, int_f *rank); HDF5_HL_F90CSTUBDLL int_f -nh5ltget_attribute_info_c(hid_t_f *loc_id, +h5ltget_attribute_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *attrnamelen, @@ -1182,7 +161,7 @@ nh5ltget_attribute_info_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5ltmake_dataset_string_c (hid_t_f *loc_id, +h5ltmake_dataset_string_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *buflen, @@ -1190,14 +169,14 @@ nh5ltmake_dataset_string_c (hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5ltread_dataset_string_c (hid_t_f *loc_id, +h5ltread_dataset_string_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, char *buf); HDF5_HL_F90CSTUBDLL int_f -nh5ltpath_valid_c(hid_t_f *loc_id, +h5ltpath_valid_c(hid_t_f *loc_id, _fcd path, size_t_f *pathlen, int_f *check_object_valid_c); @@ -1206,10 +185,9 @@ nh5ltpath_valid_c(hid_t_f *loc_id, * Image *------------------------------------------------------------------------- */ - HDF5_HL_F90CSTUBDLL int_f -nh5immake_image_8bit_c (hid_t_f *loc_id, +h5immake_image_8bit_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *width, @@ -1217,14 +195,14 @@ nh5immake_image_8bit_c (hid_t_f *loc_id, int_f *buf); HDF5_HL_F90CSTUBDLL int_f -nh5imread_image_c (hid_t_f *loc_id, +h5imread_image_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *buf); HDF5_HL_F90CSTUBDLL int_f -nh5immake_image_24bit_c (hid_t_f *loc_id, +h5immake_image_24bit_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -1234,7 +212,7 @@ nh5immake_image_24bit_c (hid_t_f *loc_id, void *buf); HDF5_HL_F90CSTUBDLL int_f -nh5imget_image_info_c(hid_t_f *loc_id, +h5imget_image_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *width, @@ -1247,14 +225,14 @@ nh5imget_image_info_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imis_image_c(hid_t_f *loc_id, +h5imis_image_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name); HDF5_HL_F90CSTUBDLL int_f -nh5immake_palette_c (hid_t_f *loc_id, +h5immake_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *dims, @@ -1262,7 +240,7 @@ nh5immake_palette_c (hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imlink_palette_c (hid_t_f *loc_id, +h5imlink_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -1270,7 +248,7 @@ nh5imlink_palette_c (hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imunlink_palette_c (hid_t_f *loc_id, +h5imunlink_palette_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *ilen, @@ -1278,7 +256,7 @@ nh5imunlink_palette_c (hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imget_npalettes_c(hid_t_f *loc_id, +h5imget_npalettes_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *npals); @@ -1286,7 +264,7 @@ nh5imget_npalettes_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imget_palette_info_c(hid_t_f *loc_id, +h5imget_palette_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *pal_number, @@ -1294,7 +272,7 @@ nh5imget_palette_info_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imget_palette_c(hid_t_f *loc_id, +h5imget_palette_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *pal_number, @@ -1302,7 +280,7 @@ nh5imget_palette_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5imis_palette_c(hid_t_f *loc_id, +h5imis_palette_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name); @@ -1315,7 +293,7 @@ nh5imis_palette_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbmake_table_c(size_t_f *namelen1, +h5tbmake_table_c(size_t_f *namelen1, _fcd name1, hid_t_f *loc_id, size_t_f *namelen, @@ -1333,7 +311,7 @@ nh5tbmake_table_c(size_t_f *namelen1, HDF5_HL_F90CSTUBDLL int_f -nh5tbwrite_field_name_c(hid_t_f *loc_id, +h5tbwrite_field_name_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -1343,57 +321,11 @@ nh5tbwrite_field_name_c(hid_t_f *loc_id, size_t_f *type_size, void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_name_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_name_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_name_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_name_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); HDF5_HL_F90CSTUBDLL int_f -nh5tbread_field_name_c(hid_t_f *loc_id, +h5tbread_field_name_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -1403,57 +335,11 @@ nh5tbread_field_name_c(hid_t_f *loc_id, size_t_f *type_size, void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_name_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_name_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_name_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_name_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); HDF5_HL_F90CSTUBDLL int_f -nh5tbwrite_field_index_c(hid_t_f *loc_id, +h5tbwrite_field_index_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *field_index, @@ -1464,51 +350,7 @@ nh5tbwrite_field_index_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbwrite_field_index_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_index_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_index_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbwrite_field_index_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_index_c(hid_t_f *loc_id, +h5tbread_field_index_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *field_index, @@ -1519,51 +361,7 @@ nh5tbread_field_index_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbread_field_index_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_index_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_index_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbread_field_index_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf); - -HDF5_HL_F90CSTUBDLL -int_f -nh5tbinsert_field_c(hid_t_f *loc_id, +h5tbinsert_field_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -1574,47 +372,7 @@ nh5tbinsert_field_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbinsert_field_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbinsert_field_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbinsert_field_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbinsert_field_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf); -HDF5_HL_F90CSTUBDLL -int_f -nh5tbdelete_field_c(hid_t_f *loc_id, +h5tbdelete_field_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -1623,7 +381,7 @@ nh5tbdelete_field_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbget_table_info_c(hid_t_f *loc_id, +h5tbget_table_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *nfields, @@ -1631,7 +389,7 @@ nh5tbget_table_info_c(hid_t_f *loc_id, HDF5_HL_F90CSTUBDLL int_f -nh5tbget_field_info_c(hid_t_f *loc_id, +h5tbget_field_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *nfields, diff --git a/hl/fortran/src/H5LTfc.c b/hl/fortran/src/H5LTfc.c index 1e0a236..c955590 100644 --- a/hl/fortran/src/H5LTfc.c +++ b/hl/fortran/src/H5LTfc.c @@ -39,7 +39,7 @@ */ int_f -nh5ltmake_dataset_c (hid_t_f *loc_id, +h5ltmake_dataset_c (hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *rank, @@ -89,1081 +89,16 @@ done: return ret_value; } -int_f -nh5ltmake_dataset_int1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_int7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_fl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_dl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nint7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_nfl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -int_f -nh5ltmake_dataset_ndl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *rank, - hsize_t_f *dims, - hid_t_f *type_id, - void *buf) -{ - return nh5ltmake_dataset_c (loc_id, namelen, name, rank, dims, type_id, buf); -} -/*------------------------------------------------------------------------- -* Function: H5LTread_dataset_c -* -* Purpose: Call H5LTmake_dataset -* -* Return: Success: 0, Failure: -1 -* -* Programmer: pvn@ncsa.uiuc.edu -* -* Date: September 09, 2004 -* -* Comments: -* -* Modifications: -* -* -*------------------------------------------------------------------------- -*/ - -int_f -nh5ltread_dataset_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - int ret_value = -1; - herr_t ret; - hid_t c_loc_id; - hid_t c_type_id; - char *c_name = NULL; - - /* - * convert FORTRAN name to C name - */ - c_name = (char *)HD5f2cstring(name, (size_t)*namelen); - if (c_name == NULL) - goto done; - - /* - * call H5LTread_dataset function. - */ - c_loc_id = (hid_t)*loc_id; - c_type_id = (hid_t)*type_id; - - ret = H5LTread_dataset(c_loc_id, c_name, c_type_id, buf ); - - if (ret < 0) - goto done; - - ret_value = 0; - -done: - if(c_name!=NULL) - HDfree(c_name); - - return ret_value; -} - -int_f -nh5ltread_dataset_int1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_int7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_fl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_dl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nint7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_nfl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl1_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl2_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl3_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl4_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl5_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl6_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -int_f -nh5ltread_dataset_ndl7_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - hid_t_f *type_id, - void *buf, - hsize_t_f *dims) -{ - return nh5ltread_dataset_c(loc_id, namelen, name, type_id, buf, dims); -} -/*------------------------------------------------------------------------- -* Function: H5LTmake_dataset_string_c -* -* Purpose: Call H5LTmake_dataset -* -* Return: Success: 0, Failure: -1 -* -* Programmer: pvn@ncsa.uiuc.edu -* -* Date: September 09, 2004 -* -* Comments: -* -* Modifications: -* -* -*------------------------------------------------------------------------- -*/ - -int_f -nh5ltmake_dataset_string_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *buflen, - char *buf) -{ - int ret_value = -1; - herr_t ret; - hid_t c_loc_id; - char *c_name = NULL; - char *c_buf = NULL; - - /* - * convert FORTRAN name to C name - */ - c_name = (char *)HD5f2cstring(name, (size_t)*namelen); - if (c_name == NULL) - goto done; - - c_buf = (char *)HD5f2cstring(buf, (size_t)*buflen); - if (c_buf == NULL) - goto done; - - /* - * call H5LTmake_dataset_string function. - */ - c_loc_id = (hid_t)*loc_id; - - ret = H5LTmake_dataset_string(c_loc_id,c_name,c_buf); - - if (ret < 0) - goto done; - - ret_value = 0; - -done: - if(c_name!=NULL) - HDfree(c_name); - if(c_buf!=NULL) - HDfree(c_buf); - - return ret_value; -} - - -/*------------------------------------------------------------------------- -* Function: H5LTread_dataset_string_c -* -* Purpose: Call H5LTread_dataset_string -* -* Return: Success: 0, Failure: -1 -* -* Programmer: pvn@ncsa.uiuc.edu -* -* Date: September 09, 2004 -* -* Comments: -* -* Modifications: -* -* -*------------------------------------------------------------------------- -*/ - -int_f -nh5ltread_dataset_string_c (hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - char *buf) -{ - int ret_value = -1; - herr_t ret; - hid_t c_loc_id; - char *c_name = NULL; - - /* - * convert FORTRAN name to C name - */ - c_name = (char *)HD5f2cstring(name, (size_t)*namelen); - if (c_name == NULL) - goto done; - - /* - * call H5LTread_dataset_string function. - */ - c_loc_id = (hid_t)*loc_id; - - ret = H5LTread_dataset_string(c_loc_id,c_name,buf); - - if (ret < 0) - goto done; - - ret_value = 0; - -done: - if(c_name!=NULL) - HDfree(c_name); - - return ret_value; -} - - - /*------------------------------------------------------------------------- -* Function: H5LTset_attribute_int_c +* Function: H5LTread_dataset_c * -* Purpose: Call H5LTset_attribute_int +* Purpose: Call H5LTmake_dataset * * Return: Success: 0, Failure: -1 * * Programmer: pvn@ncsa.uiuc.edu * -* Date: October 05, 2004 +* Date: September 09, 2004 * * Comments: * @@ -1174,46 +109,32 @@ done: */ int_f -nh5ltset_attribute_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf) +h5ltread_dataset_c (hid_t_f *loc_id, + size_t_f *namelen, + _fcd name, + hid_t_f *type_id, + void *buf) { int ret_value = -1; herr_t ret; hid_t c_loc_id; + hid_t c_type_id; char *c_name = NULL; - char *c_attrname = NULL; - size_t c_size; /* * convert FORTRAN name to C name */ - c_name = (char *)HD5f2cstring(dsetname, (size_t)*namelen); + c_name = (char *)HD5f2cstring(name, (size_t)*namelen); if (c_name == NULL) goto done; - c_attrname = (char *)HD5f2cstring(attrname, (size_t)*attrnamelen); - if (c_attrname == NULL) - goto done; - /* - * call H5LTset_attribute_int function. + * call H5LTread_dataset function. */ c_loc_id = (hid_t)*loc_id; - c_size = (size_t)*size; + c_type_id = (hid_t)*type_id; - if (sizeof(int_f) == sizeof(int)) - ret = H5LTset_attribute_int(c_loc_id,c_name,c_attrname,(const int *)buf,c_size); - else if (sizeof(int_f) == sizeof(long)) - ret = H5LTset_attribute_long(c_loc_id,c_name,c_attrname,(const long *)buf,c_size); - else if (sizeof(int_f) == sizeof(long long)) - ret = H5LTset_attribute_long_long(c_loc_id,c_name,c_attrname,(const long long *)buf,c_size); - else - goto done; + ret = H5LTread_dataset(c_loc_id, c_name, c_type_id, buf ); if (ret < 0) goto done; @@ -1223,22 +144,20 @@ nh5ltset_attribute_int_c(hid_t_f *loc_id, done: if(c_name!=NULL) HDfree(c_name); - if(c_attrname!=NULL) - HDfree(c_attrname); return ret_value; } /*------------------------------------------------------------------------- -* Function: H5LTset_attribute_float_c +* Function: H5LTmake_dataset_string_c * -* Purpose: Call H5LTset_attribute_float +* Purpose: Call H5LTmake_dataset * * Return: Success: 0, Failure: -1 * * Programmer: pvn@ncsa.uiuc.edu * -* Date: October 05, 2004 +* Date: September 09, 2004 * * Comments: * @@ -1249,65 +168,61 @@ done: */ int_f -nh5ltset_attribute_float_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf) +h5ltmake_dataset_string_c (hid_t_f *loc_id, + size_t_f *namelen, + _fcd name, + size_t_f *buflen, + char *buf) { int ret_value = -1; herr_t ret; hid_t c_loc_id; char *c_name = NULL; - char *c_attrname = NULL; - size_t c_size; + char *c_buf = NULL; /* * convert FORTRAN name to C name */ - c_name = (char *)HD5f2cstring(dsetname, (size_t)*namelen); + c_name = (char *)HD5f2cstring(name, (size_t)*namelen); if (c_name == NULL) - goto done; + goto done; - c_attrname = (char *)HD5f2cstring(attrname, (size_t)*attrnamelen); - if (c_attrname == NULL) - goto done; + c_buf = (char *)HD5f2cstring(buf, (size_t)*buflen); + if (c_buf == NULL) + goto done; /* - * Call H5LTset_attribute_float function. + * call H5LTmake_dataset_string function. */ c_loc_id = (hid_t)*loc_id; - c_size = (size_t)*size; - ret = H5LTset_attribute_float(c_loc_id,c_name,c_attrname,(float *)buf,c_size); + ret = H5LTmake_dataset_string(c_loc_id,c_name,c_buf); if (ret < 0) - goto done; + goto done; ret_value = 0; done: if(c_name!=NULL) HDfree(c_name); - if(c_attrname!=NULL) - HDfree(c_attrname); + if(c_buf!=NULL) + HDfree(c_buf); return ret_value; } /*------------------------------------------------------------------------- -* Function: H5LTset_attribute_double_c +* Function: H5LTread_dataset_string_c * -* Purpose: Call H5LTset_attribute_double +* Purpose: Call H5LTread_dataset_string * * Return: Success: 0, Failure: -1 * * Programmer: pvn@ncsa.uiuc.edu * -* Date: October 05, 2004 +* Date: September 09, 2004 * * Comments: * @@ -1318,59 +233,46 @@ done: */ int_f -nh5ltset_attribute_double_c(hid_t_f *loc_id, +h5ltread_dataset_string_c (hid_t_f *loc_id, size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *size, - void *buf) + _fcd name, + char *buf) { int ret_value = -1; herr_t ret; hid_t c_loc_id; char *c_name = NULL; - char *c_attrname = NULL; - size_t c_size; /* - * Convert FORTRAN name to C name + * convert FORTRAN name to C name */ - c_name = (char *)HD5f2cstring(dsetname, (size_t)*namelen); + c_name = (char *)HD5f2cstring(name, (size_t)*namelen); if (c_name == NULL) goto done; - c_attrname = (char *)HD5f2cstring(attrname, (size_t)*attrnamelen); - if (c_attrname == NULL) - goto done; - /* - * Call H5LTset_attribute_double function. + * call H5LTread_dataset_string function. */ c_loc_id = (hid_t)*loc_id; - c_size = (size_t)*size; - ret = H5LTset_attribute_double(c_loc_id,c_name,c_attrname,(double *)buf,c_size); + ret = H5LTread_dataset_string(c_loc_id,c_name,buf); if (ret < 0) goto done; ret_value = 0; - done: if(c_name!=NULL) HDfree(c_name); - if(c_attrname!=NULL) - HDfree(c_attrname); return ret_value; } /*------------------------------------------------------------------------- -* Function: H5LTset_attribute_string_c +* Function: H5LTset_attribute_int_c * -* Purpose: Call H5LTset_attribute_string +* Purpose: Call H5LTset_attribute_int * * Return: Success: 0, Failure: -1 * @@ -1387,13 +289,13 @@ done: */ int_f -nh5ltset_attribute_string_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - size_t_f *buflen, - void *buf) +h5ltset_attribute_c(hid_t_f *loc_id, + size_t_f *namelen, + _fcd dsetname, + size_t_f *attrnamelen, + _fcd attrname, + size_t_f *size, + void *buf, char *dtype, size_t_f *sizeof_val) { int ret_value = -1; herr_t ret; @@ -1401,6 +303,7 @@ nh5ltset_attribute_string_c(hid_t_f *loc_id, char *c_name = NULL; char *c_attrname = NULL; char *c_buf = NULL; + size_t c_size; /* * convert FORTRAN name to C name @@ -1413,28 +316,49 @@ nh5ltset_attribute_string_c(hid_t_f *loc_id, if (c_attrname == NULL) goto done; - c_buf = (char *)HD5f2cstring((_fcd)buf, (size_t)*buflen); - if (c_buf == NULL) - goto done; - - /* - * call H5LTset_attribute_string function. + * call H5LTset_attribute_int function. */ c_loc_id = (hid_t)*loc_id; + c_size = (size_t)*size; - ret = H5LTset_attribute_string(c_loc_id,c_name,c_attrname,c_buf); - + if( HDstrncmp(dtype,"I",1) == 0 ) { + if ((size_t)*sizeof_val == sizeof(int)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_INT, (const int *)buf); + else if ((size_t)*sizeof_val == sizeof(long)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_LONG, (const long *)buf); + else if ((size_t)*sizeof_val == sizeof(long long)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_LLONG, (const long long *)buf); + else + goto done; + } else if ( HDstrncmp(dtype,"R",1) == 0 ) { + if((size_t)*sizeof_val == sizeof(float)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_FLOAT, (const float *)buf); + else if((size_t)*sizeof_val == sizeof(double)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_DOUBLE, (const double *)buf); +#if H5_SIZEOF_LONG_DOUBLE !=0 + else if((size_t)*sizeof_val == sizeof(long double)) + ret = H5LT_set_attribute_numerical(c_loc_id,c_name,c_attrname, c_size, H5T_NATIVE_LDOUBLE, (const long double *)buf); +#endif + else + goto done; + } else if ( HDstrncmp(dtype,"C",1) == 0 ) { + + c_buf = (char *)HD5f2cstring((_fcd)buf, c_size); + if (c_buf == NULL) + goto done; + + ret = H5LTset_attribute_string(c_loc_id,c_name,c_attrname,c_buf); + } if (ret < 0) - goto done; + goto done; ret_value = 0; - done: if(c_name!=NULL) HDfree(c_name); - if(c_attrname!=NULL) + if(c_attrname!=NULL) HDfree(c_attrname); if(c_buf!=NULL) HDfree(c_buf); @@ -1443,7 +367,7 @@ done: } /*------------------------------------------------------------------------- -* Function: H5LTget_attribute_int_c +* Function: H5LTget_attribute_c * * Purpose: Call H5LTget_attribute_int * @@ -1462,86 +386,12 @@ done: */ int_f -nh5ltget_attribute_int_c(hid_t_f *loc_id, +h5ltget_attribute_c(hid_t_f *loc_id, size_t_f *namelen, _fcd dsetname, size_t_f *attrnamelen, _fcd attrname, - void *buf) -{ - int ret_value = -1; - herr_t ret; - hid_t c_loc_id; - char *c_name = NULL; - char *c_attrname = NULL; - - /* - * convert FORTRAN name to C name - */ - c_name = (char *)HD5f2cstring(dsetname, (size_t)*namelen); - if (c_name == NULL) - goto done; - - c_attrname = (char *)HD5f2cstring(attrname, (size_t)*attrnamelen); - if (c_attrname == NULL) - goto done; - - /* - * call H5LTget_attribute_int function. - */ - c_loc_id = (hid_t)*loc_id; - - if(sizeof(int_f) == sizeof(int)) - ret = H5LTget_attribute_int(c_loc_id,c_name,c_attrname,(int *)buf); - else if (sizeof(int_f) == sizeof(long)) - ret = H5LTget_attribute_long(c_loc_id,c_name,c_attrname,(long *)buf); - else if (sizeof(int_f) == sizeof(long long)) - ret = H5LTget_attribute_long_long(c_loc_id,c_name,c_attrname,(long long *)buf); - else - goto done; - - if (ret < 0) - goto done; - - ret_value = 0; - -done: - if(c_name!=NULL) - HDfree(c_name); - if(c_attrname!=NULL) - HDfree(c_attrname); - - - return ret_value; -} - - -/*------------------------------------------------------------------------- -* Function: H5LTget_attribute_float_c -* -* Purpose: Call H5LTget_attribute_float -* -* Return: Success: 0, Failure: -1 -* -* Programmer: pvn@ncsa.uiuc.edu -* -* Date: October 05, 2004 -* -* Comments: -* -* Modifications: -* -* -*------------------------------------------------------------------------- -*/ - -int_f -nh5ltget_attribute_float_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - void *buf) + void *buf, char *dtype, size_t_f *sizeof_val) { int ret_value = -1; herr_t ret; @@ -1565,79 +415,33 @@ nh5ltget_attribute_float_c(hid_t_f *loc_id, */ c_loc_id = (hid_t)*loc_id; - ret = H5LTget_attribute_float(c_loc_id,c_name,c_attrname,(float*)buf); - - if (ret < 0) - goto done; - - ret_value = 0; - -done: - if(c_name!=NULL) - HDfree(c_name); - if(c_attrname!=NULL) - HDfree(c_attrname); - - return ret_value; -} - -/*------------------------------------------------------------------------- -* Function: H5LTget_attribute_double_c -* -* Purpose: Call H5LTget_attribute_double -* -* Return: Success: 0, Failure: -1 -* -* Programmer: pvn@ncsa.uiuc.edu -* -* Date: October 05, 2004 -* -* Comments: -* -* Modifications: -* -* -*------------------------------------------------------------------------- -*/ - -int_f -nh5ltget_attribute_double_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd dsetname, - size_t_f *attrnamelen, - _fcd attrname, - void *buf) -{ - int ret_value = -1; - herr_t ret; - hid_t c_loc_id; - char *c_name = NULL; - char *c_attrname = NULL; - - /* - * convert FORTRAN name to C name - */ - c_name = (char *)HD5f2cstring(dsetname, (size_t)*namelen); - if (c_name == NULL) - goto done; - - c_attrname = (char *)HD5f2cstring(attrname, (size_t)*attrnamelen); - if (c_attrname == NULL) + if( HDstrncmp(dtype,"I",1) == 0) { + if((size_t)*sizeof_val == sizeof(int)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_INT,buf); + else if ((size_t)*sizeof_val == sizeof(long)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_LONG,buf); + else if ((size_t)*sizeof_val == sizeof(long long)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_LLONG,buf); + else + goto done; + } else if ( HDstrncmp(dtype,"R",1) == 0 ) { + if((size_t)*sizeof_val == sizeof(float)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_FLOAT,buf); + else if((size_t)*sizeof_val == sizeof(double)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_DOUBLE,buf); +#if H5_SIZEOF_LONG_DOUBLE !=0 + else if((size_t)*sizeof_val == sizeof(long double)) + ret = H5LTget_attribute(c_loc_id,c_name,c_attrname,H5T_NATIVE_LDOUBLE,buf); +#endif + else goto done; - - /* - * call H5LTget_attribute_int function. - */ - c_loc_id = (hid_t)*loc_id; - - ret = H5LTget_attribute_double(c_loc_id,c_name,c_attrname,(double *)buf); - + } + if (ret < 0) goto done; ret_value = 0; - done: if(c_name!=NULL) HDfree(c_name); @@ -1667,7 +471,7 @@ done: */ int_f -nh5ltget_attribute_string_c(hid_t_f *loc_id, +h5ltget_attribute_string_c(hid_t_f *loc_id, size_t_f *namelen, _fcd dsetname, size_t_f *attrnamelen, @@ -1742,7 +546,7 @@ done: */ int_f -nh5ltget_dataset_ndims_c(hid_t_f *loc_id, +h5ltget_dataset_ndims_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *rank) @@ -1802,7 +606,7 @@ done: */ int_f -nh5ltfind_dataset_c(hid_t_f *loc_id, +h5ltfind_dataset_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name) { @@ -1850,7 +654,7 @@ nh5ltfind_dataset_c(hid_t_f *loc_id, */ int_f -nh5ltget_dataset_info_c(hid_t_f *loc_id, +h5ltget_dataset_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *dims, @@ -1929,7 +733,7 @@ done: */ int_f -nh5ltget_attribute_ndims_c(hid_t_f *loc_id, +h5ltget_attribute_ndims_c(hid_t_f *loc_id, size_t_f *namelen, _fcd dsetname, size_t_f *attrnamelen, @@ -1998,7 +802,7 @@ done: */ int_f -nh5ltget_attribute_info_c(hid_t_f *loc_id, +h5ltget_attribute_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *attrnamelen, @@ -2087,7 +891,7 @@ done: */ int_f -nh5ltpath_valid_c(hid_t_f *loc_id, +h5ltpath_valid_c(hid_t_f *loc_id, _fcd path, size_t_f *pathlen, int_f *check_object_valid_c) diff --git a/hl/fortran/src/H5LTff.F90 b/hl/fortran/src/H5LTff.F90 new file mode 100644 index 0000000..ffc7ab5 --- /dev/null +++ b/hl/fortran/src/H5LTff.F90 @@ -0,0 +1,1912 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains FORTRAN interfaces for H5LT functions +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new function here then you MUST add the function name to the +! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. +! This is needed for Windows based operating systems. +! + +#include + +MODULE H5LT_CONST + USE, INTRINSIC :: ISO_C_BINDING + USE h5fortran_types + USE hdf5 + + INTERFACE h5ltmake_dataset_f + MODULE PROCEDURE h5ltmake_dataset_f_int1 + MODULE PROCEDURE h5ltmake_dataset_f_int2 + MODULE PROCEDURE h5ltmake_dataset_f_int3 + MODULE PROCEDURE h5ltmake_dataset_f_int4 + MODULE PROCEDURE h5ltmake_dataset_f_int5 + MODULE PROCEDURE h5ltmake_dataset_f_int6 + MODULE PROCEDURE h5ltmake_dataset_f_int7 + MODULE PROCEDURE h5ltmake_dataset_f_ptr + END INTERFACE + + INTERFACE h5ltread_dataset_f + MODULE PROCEDURE h5ltread_dataset_f_int1 + MODULE PROCEDURE h5ltread_dataset_f_int2 + MODULE PROCEDURE h5ltread_dataset_f_int3 + MODULE PROCEDURE h5ltread_dataset_f_int4 + MODULE PROCEDURE h5ltread_dataset_f_int5 + MODULE PROCEDURE h5ltread_dataset_f_int6 + MODULE PROCEDURE h5ltread_dataset_f_int7 + MODULE PROCEDURE h5ltread_dataset_f_ptr + END INTERFACE + + INTERFACE h5ltmake_dataset_int_f + MODULE PROCEDURE h5ltmake_dataset_int_f_1 + MODULE PROCEDURE h5ltmake_dataset_int_f_2 + MODULE PROCEDURE h5ltmake_dataset_int_f_3 + MODULE PROCEDURE h5ltmake_dataset_int_f_4 + MODULE PROCEDURE h5ltmake_dataset_int_f_5 + MODULE PROCEDURE h5ltmake_dataset_int_f_6 + MODULE PROCEDURE h5ltmake_dataset_int_f_7 + END INTERFACE + + INTERFACE h5ltread_dataset_int_f + MODULE PROCEDURE h5ltread_dataset_int_f_1 + MODULE PROCEDURE h5ltread_dataset_int_f_2 + MODULE PROCEDURE h5ltread_dataset_int_f_3 + MODULE PROCEDURE h5ltread_dataset_int_f_4 + MODULE PROCEDURE h5ltread_dataset_int_f_5 + MODULE PROCEDURE h5ltread_dataset_int_f_6 + MODULE PROCEDURE h5ltread_dataset_int_f_7 + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) & + BIND(C,NAME='h5ltmake_dataset_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + TYPE(C_PTR), VALUE :: buf ! data buffer + END FUNCTION h5ltmake_dataset_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,buf) & + BIND(C,NAME='h5ltread_dataset_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + TYPE(C_PTR), VALUE :: buf ! data buffer + END FUNCTION h5ltread_dataset_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf,dtype, SizeOf_buf) & + BIND(C,NAME='h5ltset_attribute_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: attrlen ! length of attr name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(size_t), INTENT(in) :: size ! size of attribute array + TYPE(C_PTR), VALUE :: buf ! data buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dtype ! flag indicating the datatype of the + ! the buffer: + ! R=Real, D=DOUBLE, I=Interger, C=Character + INTEGER(size_t) :: SizeOf_buf ! Sizeof the buf datatype + END FUNCTION h5ltset_attribute_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5ltget_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,dtype, SizeOf_buf) & + BIND(C,NAME='h5ltget_attribute_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: attrlen ! length of attr name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: attr_name ! name of the attribute + TYPE(C_PTR), VALUE :: buf ! data buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dtype ! flag indicating the datatype of the + ! the buffer: + ! R=Real, D=DOUBLE, I=Interger + INTEGER(size_t) :: SizeOf_buf ! Sizeof the buf datatype + END FUNCTION h5ltget_attribute_c + END INTERFACE + +CONTAINS + !------------------------------------------------------------------------- + ! Make/Read dataset functions + !------------------------------------------------------------------------- + + !------------------------------------------------------------------------- + ! Function(s): h5ltmake_dataset_f_ptr + ! + ! Purpose: Creates and writes a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: APR 29, 2015 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltmake_dataset_f_ptr(loc_id,& + dset_name,& + rank,& + dims,& + type_id,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + TYPE(C_PTR) :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) + + END SUBROUTINE h5ltmake_dataset_f_ptr + + !------------------------------------------------------------------------- + ! Function(s): h5ltmake_dataset_f_int(1-7) + ! + ! Purpose: Creates and writes a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 1, 2004 + ! + ! Comments: + ! + ! Modifications: Changed to passing C_PTR. + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltmake_dataset_f_int1(loc_id,& + dset_name,& + rank,& + dims,& + type_id,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int1 + + SUBROUTINE h5ltmake_dataset_f_int2(loc_id,& + dset_name,& + rank,& + dims,& + type_id,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int2 + + SUBROUTINE h5ltmake_dataset_f_int3(loc_id,& + dset_name,& + rank,& + dims,& + type_id,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int3 + + SUBROUTINE h5ltmake_dataset_f_int4(loc_id, dset_name, rank, dims, & + type_id, buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int4 + + SUBROUTINE h5ltmake_dataset_f_int5(loc_id, dset_name, rank, dims, & + type_id, buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int5 + + SUBROUTINE h5ltmake_dataset_f_int6(loc_id, dset_name, rank, dims, & + type_id, buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int6 + + SUBROUTINE h5ltmake_dataset_f_int7(loc_id, dset_name, rank, dims, & + type_id, buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf ! data buffer + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,type_id,f_ptr) + + END SUBROUTINE h5ltmake_dataset_f_int7 + + + !------------------------------------------------------------------------- + ! Function(s): h5ltread_dataset_f_ptr + ! + ! Purpose: Read a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: Apr 29, 2015 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_f_ptr(loc_id,& + dset_name,& + type_id,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + TYPE(C_PTR) :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id, buf) + + END SUBROUTINE h5ltread_dataset_f_ptr + + !------------------------------------------------------------------------- + ! Function(s): h5ltread_dataset_f_int(1-7) + ! + ! Purpose: Read a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_f_int1(loc_id,& + dset_name,& + type_id,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER, INTENT(inout), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int1 + + !------------------------------------------------------------------------- + ! Function: h5ltread_dataset_f_int2 + ! + ! Purpose: Read a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_f_int2(loc_id,& + dset_name,& + type_id,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int2 + + SUBROUTINE h5ltread_dataset_f_int3(loc_id,& + dset_name,& + type_id,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int3 + + SUBROUTINE h5ltread_dataset_f_int4(loc_id, dset_name, type_id, buf, & + dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int4 + + SUBROUTINE h5ltread_dataset_f_int5(loc_id, dset_name, type_id, buf, & + dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int5 + + !------------------------------------------------------------------------- + ! Function: h5ltread_dataset_f_int6 + ! + ! Purpose: Read a dataset of a type TYPE_ID + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: March 12, 2011 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_f_int6(loc_id, dset_name, type_id, buf, & + dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int6 + + SUBROUTINE h5ltread_dataset_f_int7(loc_id, dset_name, type_id, buf, & + dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,type_id,f_ptr) + + END SUBROUTINE h5ltread_dataset_f_int7 + + + !------------------------------------------------------------------------- + ! Function: h5ltmake_dataset_int_f_1 + ! + ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltmake_dataset_int_f_1 (loc_id,& + dset_name,& + rank,& + dims,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,h5t_native_integer,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_1 + + SUBROUTINE h5ltmake_dataset_int_f_2 (loc_id,& + dset_name,& + rank,& + dims,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_2 + + SUBROUTINE h5ltmake_dataset_int_f_3 (loc_id,& + dset_name,& + rank,& + dims,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_3 + + SUBROUTINE h5ltmake_dataset_int_f_4(loc_id, dset_name, rank, dims, & + buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_4 + + SUBROUTINE h5ltmake_dataset_int_f_5(loc_id, dset_name, rank, dims, & + buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_5 + + SUBROUTINE h5ltmake_dataset_int_f_6(loc_id, dset_name, rank, dims, & + buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_6 + + SUBROUTINE h5ltmake_dataset_int_f_7(loc_id, dset_name, rank, dims, & + buf, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: rank ! rank + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(in), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltmake_dataset_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltmake_dataset_int_f_7 + + !------------------------------------------------------------------------- + ! Function(s): h5ltread_dataset_int_f_(1-7) + ! + ! Purpose: Read a dataset + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_int_f_1(loc_id,& + dset_name,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_1 + + SUBROUTINE h5ltread_dataset_int_f_2(loc_id,& + dset_name,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_2 + + SUBROUTINE h5ltread_dataset_int_f_3(loc_id,& + dset_name,& + buf,& + dims,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_3 + + SUBROUTINE h5ltread_dataset_int_f_4(loc_id, dset_name, buf, dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_4 + + SUBROUTINE h5ltread_dataset_int_f_5(loc_id, dset_name, buf, dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_5 + + SUBROUTINE h5ltread_dataset_int_f_6(loc_id, dset_name, buf, dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_6 + + SUBROUTINE h5ltread_dataset_int_f_7(loc_id, dset_name, buf, dims, errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER, INTENT(inout), & + DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)), TARGET :: buf + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1,1,1,1,1,1,1)) + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,f_ptr) + + END SUBROUTINE h5ltread_dataset_int_f_7 + + + !------------------------------------------------------------------------- + ! Function: h5ltmake_dataset_string_f + ! + ! Purpose: Creates and writes a dataset + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltmake_dataset_string_f(loc_id,& + dset_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: buflen ! buffer length + + INTERFACE + INTEGER FUNCTION h5ltmake_dataset_string_c(loc_id,namelen,dset_name,buflen,buf) & + BIND(C,NAME='h5ltmake_dataset_string_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: buflen ! length of data buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: buf ! data buffer + END FUNCTION h5ltmake_dataset_string_c + END INTERFACE + + namelen = LEN(dset_name) + buflen = LEN(buf) + errcode = h5ltmake_dataset_string_c(loc_id,namelen,dset_name,buflen,buf) + + END SUBROUTINE h5ltmake_dataset_string_f + + !------------------------------------------------------------------------- + ! Function: h5ltread_dataset_string_f + ! + ! Purpose: Read a dataset + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 22, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltread_dataset_string_f(loc_id,& + dset_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(inout) :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5ltread_dataset_string_c(loc_id,namelen,dset_name,buf) & + BIND(C,NAME='h5ltread_dataset_string_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(inout) :: buf ! data buffer + END FUNCTION h5ltread_dataset_string_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5ltread_dataset_string_c(loc_id,namelen,dset_name,buf) + + END SUBROUTINE h5ltread_dataset_string_f + + !------------------------------------------------------------------------- + ! Make/Read attribute functions + !------------------------------------------------------------------------- + + !------------------------------------------------------------------------- + ! Function: h5ltset_attribute_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: May 4, 2015 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltset_attribute_f(loc_id,& + dset_name,& + attr_name,& + buf,& + buf_type, SizeOf_buf_type, & + size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + TYPE(C_PTR) :: buf ! data buffer + CHARACTER(LEN=*), INTENT(in) :: buf_type ! + INTEGER(size_t), INTENT(in) :: size ! size of attribute array + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + + CHARACTER(KIND=C_CHAR) :: buf_type_uppercase + INTEGER(size_t) :: SizeOf_buf_type + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + + buf_type_uppercase(1:1) = buf_type(1:1) + IF(buf_type_uppercase(1:1).EQ.'i')THEN + buf_type_uppercase(1:1) = 'I' + ELSE IF(buf_type_uppercase(1:1).EQ.'r')THEN + buf_type_uppercase(1:1) = 'R' + ELSE IF(buf_type_uppercase(1:1).EQ.'c')THEN + buf_type_uppercase(1:1) = 'C' + ENDIF + + errcode = h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,size,& + buf,buf_type_uppercase(1:1)//C_NULL_CHAR, SizeOf_buf_type) + + END SUBROUTINE h5ltset_attribute_f + + !------------------------------------------------------------------------- + ! Function: h5ltset_attribute_int_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltset_attribute_int_f(loc_id,& + dset_name,& + attr_name,& + buf,& + size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(size_t), INTENT(in) :: size ! size of attribute array + INTEGER :: errcode ! error code + INTEGER, DIMENSION(*), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf_type + + f_ptr = C_LOC(buf(1:1)) + +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf_type = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf(1)) +#endif + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,size,& + f_ptr,'I'//C_NULL_CHAR,SizeOf_buf_type) + + END SUBROUTINE h5ltset_attribute_int_f + + !------------------------------------------------------------------------- + ! Function: h5ltset_attribute_float_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltset_attribute_float_f(loc_id,& + dset_name,& + attr_name,& + buf,& + size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(size_t), INTENT(in) :: size ! size of attribute array + INTEGER :: errcode ! error code + REAL(KIND=C_FLOAT), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf_type + + f_ptr = C_LOC(buf(1)) +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf_type = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf(1)) +#endif + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,size,& + f_ptr,'R'//C_NULL_CHAR, SizeOf_buf_type) + + END SUBROUTINE h5ltset_attribute_float_f + + !------------------------------------------------------------------------- + ! Function: h5ltset_attribute_double_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltset_attribute_double_f(loc_id,& + dset_name,& + attr_name,& + buf,& + size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(size_t), INTENT(in) :: size ! size of attribute array + INTEGER :: errcode ! error code + REAL(KIND=C_DOUBLE), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf_type + + f_ptr = C_LOC(buf(1)) + +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf_type = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf(1)) +#endif + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,size,& + f_ptr,'R'//C_NULL_CHAR,SizeOf_buf_type) + + END SUBROUTINE h5ltset_attribute_double_f + + + !------------------------------------------------------------------------- + ! Function: h5ltset_attribute_string_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltset_attribute_string_f(loc_id,& + dset_name,& + attr_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER :: errcode ! error code + CHARACTER(LEN=*), DIMENSION(*), INTENT(in), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: buflen ! data buffer length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf_type + + f_ptr = C_LOC(buf(1)(1:1)) + +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf_type = STORAGE_SIZE(buf(1)(1:1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf(1:1)(1:1)) +#endif + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + buflen = LEN(buf) + errcode = h5ltset_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,buflen,& + f_ptr,'C'//C_NULL_CHAR, SizeOf_buf_type) + + END SUBROUTINE h5ltset_attribute_string_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_f + ! + ! Purpose: Reads an attribute named ATTR_NAME + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: Apr 29, 2015 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_f(loc_id,& + dset_name,& + attr_name,& + buf, buf_type, SizeOf_buf_type, & + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER, INTENT(out) :: errcode ! error code + CHARACTER(LEN=*), INTENT(in) :: buf_type + TYPE(C_PTR) :: buf! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + CHARACTER(KIND=C_CHAR) :: buf_type_uppercase + INTEGER(size_t) :: SizeOf_buf_type + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + + buf_type_uppercase(1:1) = buf_type(1:1) + IF(buf_type_uppercase(1:1).EQ.'i')THEN + buf_type_uppercase(1:1) = 'I' + ELSE IF(buf_type_uppercase(1:1).EQ.'r')THEN + buf_type_uppercase(1:1) = 'R' + ELSE IF(buf_type_uppercase(1:1).EQ.'c')THEN + buf_type_uppercase(1:1) = 'C' + ENDIF + errcode = h5ltget_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name, & + buf, buf_type_uppercase//C_NULL_CHAR, SizeOf_buf_type) + + + END SUBROUTINE h5ltget_attribute_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_int_f + ! + ! Purpose: Reads an attribute named ATTR_NAME + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_int_f(loc_id,& + dset_name,& + attr_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER :: errcode ! error code + INTEGER, INTENT(inout), DIMENSION(*), TARGET :: buf! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf + + f_ptr = C_LOC(buf(1)) + +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf = SIZEOF(buf(1)) +#endif + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltget_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,f_ptr,'I'//C_NULL_CHAR, SizeOf_buf) + + END SUBROUTINE h5ltget_attribute_int_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_float_f + ! + ! Purpose: Reads an attribute named ATTR_NAME + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_float_f(loc_id,& + dset_name,& + attr_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER :: errcode ! error code + REAL(KIND=C_FLOAT), INTENT(inout), DIMENSION(*), TARGET :: buf + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf + + f_ptr = C_LOC(buf(1)) +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf = SIZEOF(buf(1)) +#endif + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltget_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,f_ptr,'R'//C_NULL_CHAR, SizeOf_buf) + + END SUBROUTINE h5ltget_attribute_float_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_c_double_f + ! + ! Purpose: Reads an attribute named ATTR_NAME + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_double_f(loc_id,& + dset_name,& + attr_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER :: errcode ! error code + REAL(KIND=C_DOUBLE),INTENT(inout),DIMENSION(*), TARGET :: buf + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + TYPE(C_PTR) :: f_ptr + INTEGER(size_t) :: SizeOf_buf + + f_ptr = C_LOC(buf(1)) +#if H5_FORTRAN_HAVE_STORAGE_SIZE!=0 + SizeOf_buf = STORAGE_SIZE(buf(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf = SIZEOF(buf(1)) +#endif + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltget_attribute_c(loc_id,namelen,dset_name,attrlen,attr_name,f_ptr,'R'//C_NULL_CHAR, SizeOf_buf) + + END SUBROUTINE h5ltget_attribute_double_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_string_f + ! + ! Purpose: Reads an attribute named ATTR_NAME + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_string_f(loc_id,& + dset_name,& + attr_name,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER :: errcode ! error code + CHARACTER(LEN=*), INTENT(inout) :: buf + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + INTEGER(size_t) :: buf_size ! buf size + + INTERFACE + INTEGER FUNCTION h5ltget_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,buf_size) & + BIND(C,NAME='h5ltget_attribute_string_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: attrlen ! length of attr name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: attr_name ! name of the attribute + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(inout) :: buf ! data buffer + INTEGER(size_t) :: buf_size ! data buffer size + END FUNCTION h5ltget_attribute_string_c + END INTERFACE + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + buf_size = LEN(buf) + + errcode = h5ltget_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,buf_size) + + END SUBROUTINE h5ltget_attribute_string_f + + !------------------------------------------------------------------------- + ! Query dataset functions + !------------------------------------------------------------------------- + + !------------------------------------------------------------------------- + ! Function: h5ltget_dataset_ndims_f + ! + ! Purpose: Gets the dimensionality of a dataset + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 30, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_dataset_ndims_f(loc_id,& + dset_name,& + rank,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(inout) :: rank ! rank + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5ltget_dataset_ndims_c(loc_id,namelen,dset_name,rank) & + BIND(C,NAME='h5ltget_dataset_ndims_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(inout) :: rank ! rank + END FUNCTION h5ltget_dataset_ndims_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5ltget_dataset_ndims_c(loc_id,namelen,dset_name,rank) + + END SUBROUTINE h5ltget_dataset_ndims_f + + + !------------------------------------------------------------------------- + ! Function: h5ltfind_dataset_f + ! + ! Purpose: Inquires if a dataset named dset_name exists attached + ! to the object loc_id. + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + INTEGER FUNCTION h5ltfind_dataset_f(loc_id,& + dset_name) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5ltfind_dataset_c(loc_id,namelen,dset_name) & + BIND(C,NAME='h5ltfind_dataset_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + END FUNCTION h5ltfind_dataset_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5ltfind_dataset_c(loc_id,namelen,dset_name) + h5ltfind_dataset_f = errcode + + END FUNCTION h5ltfind_dataset_f + + !------------------------------------------------------------------------- + ! Function: h5ltget_dataset_info_f + ! + ! Purpose: Gets information about a dataset + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 30, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_dataset_info_f(loc_id,& + dset_name,& + dims,& + type_class,& + type_size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions + INTEGER, INTENT(inout) :: type_class ! type class + INTEGER(size_t), INTENT(inout) :: type_size ! type size + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5ltget_dataset_info_c(loc_id,namelen,dset_name,dims,type_class,type_size) & + BIND(C,NAME='h5ltget_dataset_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions + INTEGER, INTENT(inout) :: type_class ! type class + INTEGER(size_t), INTENT(inout) :: type_size ! type size + END FUNCTION h5ltget_dataset_info_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5ltget_dataset_info_c(loc_id,namelen,dset_name,dims,type_class,type_size) + + END SUBROUTINE h5ltget_dataset_info_f + + + !------------------------------------------------------------------------- + ! Query attribute functions + !------------------------------------------------------------------------- + + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_ndims_f + ! + ! Purpose: Create and write an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: October 05, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_ndims_f(loc_id,& + dset_name,& + attr_name,& + rank,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER, INTENT(inout) :: rank ! rank + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + + INTERFACE + INTEGER FUNCTION h5ltget_attribute_ndims_c(loc_id,namelen,dset_name,attrlen,attr_name,rank) & + BIND(C,NAME='h5ltget_attribute_ndims_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: attrlen ! length of attr name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: attr_name ! name of the attribute + INTEGER, INTENT(inout) :: rank ! rank + END FUNCTION h5ltget_attribute_ndims_c + END INTERFACE + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltget_attribute_ndims_c(loc_id,namelen,dset_name,attrlen,attr_name,rank) + + END SUBROUTINE h5ltget_attribute_ndims_f + + + !------------------------------------------------------------------------- + ! Function: h5ltget_attribute_info_f + ! + ! Purpose: Gets information about an attribute + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: pvn@ncsa.uiuc.edu + ! + ! Date: September 30, 2004 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltget_attribute_info_f(loc_id,& + dset_name,& + attr_name,& + dims,& + type_class,& + type_size,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions + INTEGER, INTENT(inout) :: type_class ! type class + INTEGER(size_t), INTENT(inout) :: type_size ! type size + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: attrlen ! name length + + INTERFACE + INTEGER FUNCTION h5ltget_attribute_info_c(loc_id,namelen,dset_name,attrlen,attr_name,dims,type_class,type_size) & + BIND(C,NAME='h5ltget_attribute_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + INTEGER(size_t) :: namelen ! length of name buffer + INTEGER(size_t) :: attrlen ! length of attr name buffer + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: attr_name ! name of the attribute + INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions + INTEGER, INTENT(inout) :: type_class ! type class + INTEGER(size_t), INTENT(inout) :: type_size ! type size + END FUNCTION h5ltget_attribute_info_c + END INTERFACE + + namelen = LEN(dset_name) + attrlen = LEN(attr_name) + errcode = h5ltget_attribute_info_c(loc_id,namelen,dset_name,attrlen,attr_name,dims,type_class,type_size) + + END SUBROUTINE h5ltget_attribute_info_f + + !------------------------------------------------------------------------- + ! Function: h5ltpath_valid_f + ! + ! Purpose: Validates a path + ! + ! Return: Success: 0, Failure: -1 + ! + ! Programmer: M. Scot Breitenfeld + ! + ! Date: February 18, 2012 + ! + ! Comments: + ! + ! Modifications: + ! + !------------------------------------------------------------------------- + + SUBROUTINE h5ltpath_valid_f(loc_id, path, check_object_valid, path_valid, errcode) + + IMPLICIT NONE + INTEGER(hid_t) , INTENT(IN) :: loc_id ! An identifier of an object in the file. + CHARACTER(LEN=*), INTENT(IN) :: path ! Path to the object to check, relative to loc_id. + LOGICAL , INTENT(IN) :: check_object_valid ! Indicates whether to check if the final component + ! of the path resolves to a valid object + LOGICAL , INTENT(OUT) :: path_valid ! Object status + INTEGER , INTENT(OUT) :: errcode ! Error code: 0 on success and -1 on failure + + INTEGER(size_t) :: pathlen + INTEGER :: check_object_valid_c + INTEGER :: status + + INTERFACE + INTEGER FUNCTION h5ltpath_valid_c(loc_id, path, pathlen, check_object_valid_c) & + BIND(C,NAME='h5ltpath_valid_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: path + INTEGER(size_t) :: pathlen + INTEGER :: check_object_valid_c + END FUNCTION h5ltpath_valid_c + END INTERFACE + + ! Initialize + path_valid = .FALSE. + errcode = 0 + + check_object_valid_c = 0 + IF(check_object_valid) check_object_valid_c = 1 + + pathlen = LEN(path) + status = h5ltpath_valid_c(loc_id, path, pathlen, check_object_valid_c) + + IF(status.EQ.1)THEN + path_valid = .TRUE. + ELSE IF(status.LT.0)THEN + errcode = -1 + ENDIF + + END SUBROUTINE h5ltpath_valid_f + +END MODULE H5LT_CONST + + + + + + diff --git a/hl/fortran/src/H5LTff.f90 b/hl/fortran/src/H5LTff.f90 deleted file mode 100644 index 9393f7f..0000000 --- a/hl/fortran/src/H5LTff.f90 +++ /dev/null @@ -1,6490 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains FORTRAN90 interfaces for H5LT functions -! - -MODULE h5lt - USE h5fortran_types - USE hdf5 - - INTERFACE h5ltmake_dataset_f - MODULE PROCEDURE h5ltmake_dataset_f_int1 - MODULE PROCEDURE h5ltmake_dataset_f_int2 - MODULE PROCEDURE h5ltmake_dataset_f_int3 - MODULE PROCEDURE h5ltmake_dataset_f_int4 - MODULE PROCEDURE h5ltmake_dataset_f_int5 - MODULE PROCEDURE h5ltmake_dataset_f_int6 - MODULE PROCEDURE h5ltmake_dataset_f_int7 - MODULE PROCEDURE h5ltmake_dataset_f_float1 - MODULE PROCEDURE h5ltmake_dataset_f_float2 - MODULE PROCEDURE h5ltmake_dataset_f_float3 - MODULE PROCEDURE h5ltmake_dataset_f_float4 - MODULE PROCEDURE h5ltmake_dataset_f_float5 - MODULE PROCEDURE h5ltmake_dataset_f_float6 - MODULE PROCEDURE h5ltmake_dataset_f_float7 - MODULE PROCEDURE h5ltmake_dataset_f_double1 - MODULE PROCEDURE h5ltmake_dataset_f_double2 - MODULE PROCEDURE h5ltmake_dataset_f_double3 - MODULE PROCEDURE h5ltmake_dataset_f_double4 - MODULE PROCEDURE h5ltmake_dataset_f_double5 - MODULE PROCEDURE h5ltmake_dataset_f_double6 - MODULE PROCEDURE h5ltmake_dataset_f_double7 - END INTERFACE - - INTERFACE h5ltread_dataset_f - MODULE PROCEDURE h5ltread_dataset_f_int1 - MODULE PROCEDURE h5ltread_dataset_f_int2 - MODULE PROCEDURE h5ltread_dataset_f_int3 - MODULE PROCEDURE h5ltread_dataset_f_int4 - MODULE PROCEDURE h5ltread_dataset_f_int5 - MODULE PROCEDURE h5ltread_dataset_f_int6 - MODULE PROCEDURE h5ltread_dataset_f_int7 - MODULE PROCEDURE h5ltread_dataset_f_float1 - MODULE PROCEDURE h5ltread_dataset_f_float2 - MODULE PROCEDURE h5ltread_dataset_f_float3 - MODULE PROCEDURE h5ltread_dataset_f_float4 - MODULE PROCEDURE h5ltread_dataset_f_float5 - MODULE PROCEDURE h5ltread_dataset_f_float6 - MODULE PROCEDURE h5ltread_dataset_f_float7 - MODULE PROCEDURE h5ltread_dataset_f_double1 - MODULE PROCEDURE h5ltread_dataset_f_double2 - MODULE PROCEDURE h5ltread_dataset_f_double3 - MODULE PROCEDURE h5ltread_dataset_f_double4 - MODULE PROCEDURE h5ltread_dataset_f_double5 - MODULE PROCEDURE h5ltread_dataset_f_double6 - MODULE PROCEDURE h5ltread_dataset_f_double7 - END INTERFACE - - INTERFACE h5ltmake_dataset_int_f - MODULE PROCEDURE h5ltmake_dataset_int_f_1 - MODULE PROCEDURE h5ltmake_dataset_int_f_2 - MODULE PROCEDURE h5ltmake_dataset_int_f_3 - MODULE PROCEDURE h5ltmake_dataset_int_f_4 - MODULE PROCEDURE h5ltmake_dataset_int_f_5 - MODULE PROCEDURE h5ltmake_dataset_int_f_6 - MODULE PROCEDURE h5ltmake_dataset_int_f_7 - END INTERFACE - - INTERFACE h5ltmake_dataset_float_f - MODULE PROCEDURE h5ltmake_dataset_float_f_1 - MODULE PROCEDURE h5ltmake_dataset_float_f_2 - MODULE PROCEDURE h5ltmake_dataset_float_f_3 - MODULE PROCEDURE h5ltmake_dataset_float_f_4 - MODULE PROCEDURE h5ltmake_dataset_float_f_5 - MODULE PROCEDURE h5ltmake_dataset_float_f_6 - MODULE PROCEDURE h5ltmake_dataset_float_f_7 - END INTERFACE - - INTERFACE h5ltmake_dataset_double_f - MODULE PROCEDURE h5ltmake_dataset_double_f_1 - MODULE PROCEDURE h5ltmake_dataset_double_f_2 - MODULE PROCEDURE h5ltmake_dataset_double_f_3 - MODULE PROCEDURE h5ltmake_dataset_double_f_4 - MODULE PROCEDURE h5ltmake_dataset_double_f_5 - MODULE PROCEDURE h5ltmake_dataset_double_f_6 - MODULE PROCEDURE h5ltmake_dataset_double_f_7 - END INTERFACE - - INTERFACE h5ltread_dataset_int_f - MODULE PROCEDURE h5ltread_dataset_int_f_1 - MODULE PROCEDURE h5ltread_dataset_int_f_2 - MODULE PROCEDURE h5ltread_dataset_int_f_3 - MODULE PROCEDURE h5ltread_dataset_int_f_4 - MODULE PROCEDURE h5ltread_dataset_int_f_5 - MODULE PROCEDURE h5ltread_dataset_int_f_6 - MODULE PROCEDURE h5ltread_dataset_int_f_7 - END INTERFACE - - INTERFACE h5ltread_dataset_float_f - MODULE PROCEDURE h5ltread_dataset_float_f_1 - MODULE PROCEDURE h5ltread_dataset_float_f_2 - MODULE PROCEDURE h5ltread_dataset_float_f_3 - MODULE PROCEDURE h5ltread_dataset_float_f_4 - MODULE PROCEDURE h5ltread_dataset_float_f_5 - MODULE PROCEDURE h5ltread_dataset_float_f_6 - MODULE PROCEDURE h5ltread_dataset_float_f_7 - END INTERFACE - - INTERFACE h5ltread_dataset_double_f - MODULE PROCEDURE h5ltread_dataset_double_f_1 - MODULE PROCEDURE h5ltread_dataset_double_f_2 - MODULE PROCEDURE h5ltread_dataset_double_f_3 - MODULE PROCEDURE h5ltread_dataset_double_f_4 - MODULE PROCEDURE h5ltread_dataset_double_f_5 - MODULE PROCEDURE h5ltread_dataset_double_f_6 - MODULE PROCEDURE h5ltread_dataset_double_f_7 - END INTERFACE - -CONTAINS - !------------------------------------------------------------------------- - ! Make/Read dataset functions - !------------------------------------------------------------------------- - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int1 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int1(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT1_C'::h5ltmake_dataset_int1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int1 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int2 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int2(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT2_C'::h5ltmake_dataset_int2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int2 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int3 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int3(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT3_C'::h5ltmake_dataset_int3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int4 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int4(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT4_C'::h5ltmake_dataset_int4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int5 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int5(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT5_C'::h5ltmake_dataset_int5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int6 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int6(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT6_C'::h5ltmake_dataset_int6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_int7 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_int7(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_int7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_int7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_INT7_C'::h5ltmake_dataset_int7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_int7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_int7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_int7 - - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float1 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float1(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL1_C'::h5ltmake_dataset_fl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float1 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float2 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float2(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL2_C'::h5ltmake_dataset_fl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float2 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float3 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float3(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL3_C'::h5ltmake_dataset_fl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float4 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float4(loc_id, dset_name, rank, dims,& - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL4_C'::h5ltmake_dataset_fl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3), dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float5 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float5(loc_id, dset_name, rank, dims,& - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL5_C'::h5ltmake_dataset_fl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float6 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float6(loc_id, dset_name, rank, dims,& - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL6_C'::h5ltmake_dataset_fl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_float7 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_float7(loc_id, dset_name, rank, dims,& - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_float7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_fl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_FL7_C'::h5ltmake_dataset_fl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_fl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_fl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_float7 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double1 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double1(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL1_C'::h5ltmake_dataset_dl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double1 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double2 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double2(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL2_C'::h5ltmake_dataset_dl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double2 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double3 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 1, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double3(loc_id,& - dset_name,& - rank,& - dims,& - type_id,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL3_C'::h5ltmake_dataset_dl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double4 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double4(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3), dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL4_C'::h5ltmake_dataset_dl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double5 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double5(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL5_C'::h5ltmake_dataset_dl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double6 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double6(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL6_C'::h5ltmake_dataset_dl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_f_double7 - ! - ! Purpose: Creates and writes a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 7, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_f_double7(loc_id, dset_name, rank, dims, & - type_id, buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_f_double7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_dl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_DL7_C'::h5ltmake_dataset_dl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_dl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_dl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - - END SUBROUTINE h5ltmake_dataset_f_double7 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int1 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int1(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT1_C'::h5ltread_dataset_int1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(HID_T), INTENT(IN) :: loc_id ! file or group identifier - INTEGER(HID_T), INTENT(IN) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(LEN=*), INTENT(IN) :: dset_name ! name of the dataset - INTEGER(HSIZE_T), DIMENSION(*), INTENT(IN) :: dims ! size of the buffer buf - INTEGER, INTENT(IN), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int1_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int1 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int2 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int2(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT2_C'::h5ltread_dataset_int2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int2_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int3 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int3(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT3_C'::h5ltread_dataset_int3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int3_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int4 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 12, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int4(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT4_C'::h5ltread_dataset_int4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int4_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int5 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 12, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int5(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT5_C'::h5ltread_dataset_int5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int5_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int6 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 12, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int6(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT6_C'::h5ltread_dataset_int6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int6_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_int7 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 12, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_int7(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_int7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_int7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_INT7_C'::h5ltread_dataset_int7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_int7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_int7_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_int7 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float1 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float1(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL1_C'::h5ltread_dataset_fl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float1 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float2 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float2(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float2 - !DEC$endif - ! - - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL2_C'::h5ltread_dataset_fl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float3 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float3(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL3_C'::h5ltread_dataset_fl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float4 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float4(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL4_C'::h5ltread_dataset_fl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float5 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float5(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL5_C'::h5ltread_dataset_fl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float6 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float6(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL6_C'::h5ltread_dataset_fl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_float7 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_float7(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_float7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_fl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_FL7_C'::h5ltread_dataset_fl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_fl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_fl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_float7 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double1 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double1(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport ::h5ltread_dataset_f_double1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL1_C'::h5ltread_dataset_dl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double1 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double2 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double2(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL2_C'::h5ltread_dataset_dl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double3 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double3(loc_id,& - dset_name,& - type_id,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL3_C'::h5ltread_dataset_dl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double4 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double4(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL4_C'::h5ltread_dataset_dl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double5 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double5(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL5_C'::h5ltread_dataset_dl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double6 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double6(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL6_C'::h5ltread_dataset_dl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_f_double7 - ! - ! Purpose: Read a dataset of a type TYPE_ID - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_f_double7(loc_id, dset_name, type_id, buf, & - dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_f_double7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_dl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_DL7_C'::h5ltread_dataset_dl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_dl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_dl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - - END SUBROUTINE h5ltread_dataset_f_double7 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_1 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_1 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT1_C'::h5ltmake_dataset_nint1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint1_c(loc_id,namelen,dset_name,rank,dims,h5t_native_integer,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_1 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_2 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_2 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT2_C'::h5ltmake_dataset_nint2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint2_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_2 - - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_3 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_3 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT3_C'::h5ltmake_dataset_nint3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint3_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_4 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_4(loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT4_C'::h5ltmake_dataset_nint4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint4_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_5 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_5(loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT5_C'::h5ltmake_dataset_nint5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint5_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_6 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_6(loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT6_C'::h5ltmake_dataset_nint6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint6_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_int_f_7 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_INT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_int_f_7(loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_int_f_7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nint7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NINT7_C'::h5ltmake_dataset_nint7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nint7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nint7_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_INTEGER,buf) - - END SUBROUTINE h5ltmake_dataset_int_f_7 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_1 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_1 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL1_C'::h5ltmake_dataset_nfl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl1_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_1 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_2 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_2 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL2_C'::h5ltmake_dataset_nfl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl2_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_2 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_3 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_3 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL3_C'::h5ltmake_dataset_nfl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl3_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_4 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_4 (loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL4_C'::h5ltmake_dataset_nfl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl4_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_5 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_5 (loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL5_C'::h5ltmake_dataset_nfl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl5_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_6 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_6 (loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL6_C'::h5ltmake_dataset_nfl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl6_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_float_f_7 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_FLOAT type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_float_f_7 (loc_id, dset_name, rank, dims, & - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_float_f_7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_nfl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NFL7_C'::h5ltmake_dataset_nfl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_nfl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_nfl7_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_REAL,buf) - - END SUBROUTINE h5ltmake_dataset_float_f_7 - - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_1 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_1 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl1_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL1_C'::h5ltmake_dataset_ndl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl1_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_1 - - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_2 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_2 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl2_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL2_C'::h5ltmake_dataset_ndl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl2_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_2 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_3 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_3 (loc_id,& - dset_name,& - rank,& - dims,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl3_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL3_C'::h5ltmake_dataset_ndl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl3_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_4 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_4 (loc_id, dset_name, rank, dims,& - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl4_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL4_C'::h5ltmake_dataset_ndl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl4_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_5 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_5 (loc_id, dset_name, rank, dims,& - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl5_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL5_C'::h5ltmake_dataset_ndl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl5_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_6 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_6 (loc_id, dset_name, rank, dims,& - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl6_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL6_C'::h5ltmake_dataset_ndl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl6_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_double_f_7 - ! - ! Purpose: Creates and writes a dataset of H5T_NATIVE_DOUBLE type - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_double_f_7 (loc_id, dset_name, rank, dims,& - buf, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_double_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_ndl7_c(loc_id,namelen,dset_name,rank,dims,type_id,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_NDL7_C'::h5ltmake_dataset_ndl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: rank ! rank - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(in), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_ndl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltmake_dataset_ndl7_c(loc_id,namelen,dset_name,rank,dims,H5T_NATIVE_DOUBLE,buf) - - END SUBROUTINE h5ltmake_dataset_double_f_7 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_1 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_1(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_1 - !DEC$endif - ! - - INTEGER(HID_T), INTENT(IN) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT1_C'::h5ltread_dataset_nint1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint1_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_1 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_2 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_2(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT2_C'::h5ltread_dataset_nint2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint2_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_3 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_3(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT3_C'::h5ltread_dataset_nint3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint3_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_4 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_4(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT4_C'::h5ltread_dataset_nint4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint4_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_5 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_5(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT5_C'::h5ltread_dataset_nint5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint5_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_6 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_6(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT6_C'::h5ltread_dataset_nint6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint6_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_int_f_7 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_int_f_7(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_int_f_7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nint7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NINT7_C'::h5ltread_dataset_nint7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nint7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nint7_c(loc_id,namelen,dset_name,H5T_NATIVE_INTEGER,buf,dims) - - END SUBROUTINE h5ltread_dataset_int_f_7 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_1 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_1(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL1_C'::h5ltread_dataset_nfl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl1_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_1 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_2 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_2(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL2_C'::h5ltread_dataset_nfl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl2_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_3 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_3(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL3_C'::h5ltread_dataset_nfl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl3_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_4 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_4(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL4_C'::h5ltread_dataset_nfl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl4_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_5 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_5(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL5_C'::h5ltread_dataset_nfl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl5_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_6 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_6(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL6_C'::h5ltread_dataset_nfl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl6_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_float_f_7 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_float_f_7(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_float_f_7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_nfl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NFL7_C'::h5ltread_dataset_nfl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - REAL, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_nfl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_nfl7_c(loc_id,namelen,dset_name,H5T_NATIVE_REAL,buf,dims) - - END SUBROUTINE h5ltread_dataset_float_f_7 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_1 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_1(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_1 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl1_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL1_C'::h5ltread_dataset_ndl1_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl1_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl1_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_1 - - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_2 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_2(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_2 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl2_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL2_C'::h5ltread_dataset_ndl2_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl2_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl2_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_2 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_3 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_3(loc_id,& - dset_name,& - buf,& - dims,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_3 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl3_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL3_C'::h5ltread_dataset_ndl3_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl3_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl3_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_3 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_4 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_4(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_4 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl4_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL4_C'::h5ltread_dataset_ndl4_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl4_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl4_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_4 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_5 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_5(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_5 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl5_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL5_C'::h5ltread_dataset_ndl5_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl5_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl5_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_5 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_6 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_6(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_6 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl6_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL6_C'::h5ltread_dataset_ndl6_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl6_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl6_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_6 - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_double_f_7 - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: March 8, 2011 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_double_f_7(loc_id, dset_name, buf, dims, errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_double_f_7 - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_ndl7_c(loc_id,namelen,dset_name,type_id,buf,dims) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_NDL7_C'::h5ltread_dataset_ndl7_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(hid_t), INTENT(in) :: type_id ! datatype identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), DIMENSION(*), INTENT(in) :: dims ! size of the buffer buf - DOUBLE PRECISION, INTENT(inout), & - DIMENSION(dims(1),dims(2),dims(3),dims(4),dims(5),dims(6),dims(7)) :: buf ! data buffer - END FUNCTION h5ltread_dataset_ndl7_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_ndl7_c(loc_id,namelen,dset_name,H5T_NATIVE_DOUBLE,buf,dims) - - END SUBROUTINE h5ltread_dataset_double_f_7 - - - !------------------------------------------------------------------------- - ! Function: h5ltmake_dataset_string_f - ! - ! Purpose: Creates and writes a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltmake_dataset_string_f(loc_id,& - dset_name,& - buf,& - errcode ) - - IMPLICIT NONE - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltmake_dataset_string_f - !DEC$endif - ! - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: buflen ! buffer length - - INTERFACE - INTEGER FUNCTION h5ltmake_dataset_string_c(loc_id,namelen,dset_name,buflen,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTMAKE_DATASET_STRING_C'::h5ltmake_dataset_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: buflen ! length of data buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: buf ! data buffer - END FUNCTION h5ltmake_dataset_string_c - END INTERFACE - - namelen = LEN(dset_name) - buflen = LEN(buf) - errcode = h5ltmake_dataset_string_c(loc_id,namelen,dset_name,buflen,buf) - - END SUBROUTINE h5ltmake_dataset_string_f - - !------------------------------------------------------------------------- - ! Function: h5ltread_dataset_string_f - ! - ! Purpose: Read a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 22, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltread_dataset_string_f(loc_id,& - dset_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltread_dataset_string_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(inout) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltread_dataset_string_c(loc_id,namelen,dset_name,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTREAD_DATASET_STRING_C'::h5ltread_dataset_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(inout) :: buf ! data buffer - END FUNCTION h5ltread_dataset_string_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltread_dataset_string_c(loc_id,namelen,dset_name,buf) - - END SUBROUTINE h5ltread_dataset_string_f - - - - - !------------------------------------------------------------------------- - ! Make/Read attribute functions - !------------------------------------------------------------------------- - - - !------------------------------------------------------------------------- - ! Function: h5ltset_attribute_int_f - ! - ! Purpose: Create and write an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltset_attribute_int_f(loc_id,& - dset_name,& - attr_name,& - buf,& - size,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltset_attribute_int_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - INTEGER :: errcode ! error code - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltset_attribute_int_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTSET_ATTRIBUTE_INT_C'::h5ltset_attribute_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltset_attribute_int_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltset_attribute_int_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - - END SUBROUTINE h5ltset_attribute_int_f - - !------------------------------------------------------------------------- - ! Function: h5ltset_attribute_float_f - ! - ! Purpose: Create and write an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltset_attribute_float_f(loc_id,& - dset_name,& - attr_name,& - buf,& - size,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltset_attribute_float_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - INTEGER :: errcode ! error code - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltset_attribute_float_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTSET_ATTRIBUTE_FLOAT_C'::h5ltset_attribute_float_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltset_attribute_float_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltset_attribute_float_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - - END SUBROUTINE h5ltset_attribute_float_f - - !------------------------------------------------------------------------- - ! Function: h5ltset_attribute_double_f - ! - ! Purpose: Create and write an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltset_attribute_double_f(loc_id,& - dset_name,& - attr_name,& - buf,& - size,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltset_attribute_double_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - INTEGER :: errcode ! error code - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltset_attribute_double_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTSET_ATTRIBUTE_DOUBLE_C'::h5ltset_attribute_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(size_t), INTENT(in) :: size ! size of attribute array - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltset_attribute_double_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltset_attribute_double_c(loc_id,namelen,dset_name,attrlen,attr_name,size,buf) - - END SUBROUTINE h5ltset_attribute_double_f - - - !------------------------------------------------------------------------- - ! Function: h5ltset_attribute_string_f - ! - ! Purpose: Create and write an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltset_attribute_string_f(loc_id,& - dset_name,& - attr_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltset_attribute_string_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER :: errcode ! error code - CHARACTER(len=*), INTENT(in) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - INTEGER(size_t) :: buflen ! data buffer length - - INTERFACE - INTEGER FUNCTION h5ltset_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buflen,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTSET_ATTRIBUTE_STRING_C'::h5ltset_attribute_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - INTEGER(size_t) :: buflen ! data buffer length - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - CHARACTER(len=*), INTENT(in) :: buf ! data buffer - END FUNCTION h5ltset_attribute_string_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - buflen = LEN(buf) - errcode = h5ltset_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buflen,buf) - - END SUBROUTINE h5ltset_attribute_string_f - - - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_int_f - ! - ! Purpose: Reads an attribute named ATTR_NAME - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_int_f(loc_id,& - dset_name,& - attr_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_int_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER :: errcode ! error code - INTEGER, INTENT(inout), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_int_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_INT_C'::h5ltget_attribute_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER, INTENT(inout), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltget_attribute_int_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltget_attribute_int_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - - END SUBROUTINE h5ltget_attribute_int_f - - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_float_f - ! - ! Purpose: Reads an attribute named ATTR_NAME - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_float_f(loc_id,& - dset_name,& - attr_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_float_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER :: errcode ! error code - REAL, INTENT(inout), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_float_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_FLOAT_C'::h5ltget_attribute_float_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - REAL, INTENT(inout), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltget_attribute_float_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltget_attribute_float_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - - END SUBROUTINE h5ltget_attribute_float_f - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_double_f - ! - ! Purpose: Reads an attribute named ATTR_NAME - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_double_f(loc_id,& - dset_name,& - attr_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_double_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER :: errcode ! error code - DOUBLE PRECISION,INTENT(inout),DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_double_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_DOUBLE_C'::h5ltget_attribute_double_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - DOUBLE PRECISION, INTENT(inout), DIMENSION(*) :: buf ! data buffer - END FUNCTION h5ltget_attribute_double_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltget_attribute_double_c(loc_id,namelen,dset_name,attrlen,attr_name,buf) - - END SUBROUTINE h5ltget_attribute_double_f - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_string_f - ! - ! Purpose: Reads an attribute named ATTR_NAME - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_string_f(loc_id,& - dset_name,& - attr_name,& - buf,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_string_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER :: errcode ! error code - CHARACTER(len=*), INTENT(inout) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - INTEGER(size_t) :: buf_size ! buf size - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,buf_size) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_STRING_C'::h5ltget_attribute_string_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - CHARACTER(len=*), INTENT(inout) :: buf ! data buffer - INTEGER(size_t) :: buf_size ! data buffer size - END FUNCTION h5ltget_attribute_string_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - buf_size = LEN(buf) - - errcode = h5ltget_attribute_string_c(loc_id,namelen,dset_name,attrlen,attr_name,buf,buf_size) - - END SUBROUTINE h5ltget_attribute_string_f - - !------------------------------------------------------------------------- - ! Query dataset functions - !------------------------------------------------------------------------- - - !------------------------------------------------------------------------- - ! Function: h5ltget_dataset_ndims_f - ! - ! Purpose: Gets the dimensionality of a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 30, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_dataset_ndims_f(loc_id,& - dset_name,& - rank,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_dataset_ndims_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(inout) :: rank ! rank - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_dataset_ndims_c(loc_id,namelen,dset_name,rank) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_DATASET_NDIMS_C'::h5ltget_dataset_ndims_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(inout) :: rank ! rank - END FUNCTION h5ltget_dataset_ndims_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltget_dataset_ndims_c(loc_id,namelen,dset_name,rank) - - END SUBROUTINE h5ltget_dataset_ndims_f - - - !------------------------------------------------------------------------- - ! Function: h5ltfind_dataset_f - ! - ! Purpose: Inquires if a dataset named dset_name exists attached - ! to the object loc_id. - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - INTEGER FUNCTION h5ltfind_dataset_f(loc_id,& - dset_name) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltfind_dataset_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltfind_dataset_c(loc_id,namelen,dset_name) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTFIND_DATASET_C'::h5ltfind_dataset_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - END FUNCTION h5ltfind_dataset_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltfind_dataset_c(loc_id,namelen,dset_name) - h5ltfind_dataset_f = errcode - - END FUNCTION h5ltfind_dataset_f - - !------------------------------------------------------------------------- - ! Function: h5ltget_dataset_info_f - ! - ! Purpose: Gets information about a dataset - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 30, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_dataset_info_f(loc_id,& - dset_name,& - dims,& - type_class,& - type_size,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_dataset_info_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions - INTEGER, INTENT(inout) :: type_class ! type class - INTEGER(size_t), INTENT(inout) :: type_size ! type size - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_dataset_info_c(loc_id,namelen,dset_name,dims,type_class,type_size) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_DATASET_INFO_C'::h5ltget_dataset_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions - INTEGER, INTENT(inout) :: type_class ! type class - INTEGER(size_t), INTENT(inout) :: type_size ! type size - END FUNCTION h5ltget_dataset_info_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5ltget_dataset_info_c(loc_id,namelen,dset_name,dims,type_class,type_size) - - END SUBROUTINE h5ltget_dataset_info_f - - - !------------------------------------------------------------------------- - ! Query attribute functions - !------------------------------------------------------------------------- - - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_ndims_f - ! - ! Purpose: Create and write an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: October 05, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_ndims_f(loc_id,& - dset_name,& - attr_name,& - rank,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_ndims_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER, INTENT(inout) :: rank ! rank - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_ndims_c(loc_id,namelen,dset_name,attrlen,attr_name,rank) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_NDIMS_C'::h5ltget_attribute_ndims_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER, INTENT(inout) :: rank ! rank - END FUNCTION h5ltget_attribute_ndims_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltget_attribute_ndims_c(loc_id,namelen,dset_name,attrlen,attr_name,rank) - - END SUBROUTINE h5ltget_attribute_ndims_f - - - !------------------------------------------------------------------------- - ! Function: h5ltget_attribute_info_f - ! - ! Purpose: Gets information about an attribute - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: pvn@ncsa.uiuc.edu - ! - ! Date: September 30, 2004 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltget_attribute_info_f(loc_id,& - dset_name,& - attr_name,& - dims,& - type_class,& - type_size,& - errcode ) - - IMPLICIT NONE - - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltget_attribute_info_f - !DEC$endif - ! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions - INTEGER, INTENT(inout) :: type_class ! type class - INTEGER(size_t), INTENT(inout) :: type_size ! type size - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: attrlen ! name length - - INTERFACE - INTEGER FUNCTION h5ltget_attribute_info_c(loc_id,namelen,dset_name,attrlen,attr_name,dims,type_class,type_size) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTGET_ATTRIBUTE_INFO_C'::h5ltget_attribute_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: attr_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - INTEGER(size_t) :: namelen ! length of name buffer - INTEGER(size_t) :: attrlen ! length of attr name buffer - CHARACTER(len=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(len=*), INTENT(in) :: attr_name ! name of the attribute - INTEGER(hsize_t),DIMENSION(*),INTENT(inout):: dims ! dimensions - INTEGER, INTENT(inout) :: type_class ! type class - INTEGER(size_t), INTENT(inout) :: type_size ! type size - END FUNCTION h5ltget_attribute_info_c - END INTERFACE - - namelen = LEN(dset_name) - attrlen = LEN(attr_name) - errcode = h5ltget_attribute_info_c(loc_id,namelen,dset_name,attrlen,attr_name,dims,type_class,type_size) - - END SUBROUTINE h5ltget_attribute_info_f - - !------------------------------------------------------------------------- - ! Function: h5ltpath_valid_f - ! - ! Purpose: Validates a path - ! - ! Return: Success: 0, Failure: -1 - ! - ! Programmer: M. Scot Breitenfeld - ! - ! Date: February 18, 2012 - ! - ! Comments: - ! - ! Modifications: - ! - !------------------------------------------------------------------------- - - SUBROUTINE h5ltpath_valid_f(loc_id, path, check_object_valid, path_valid, errcode) - - IMPLICIT NONE - ! - !This definition is needed for Windows DLLs - !DEC$if defined(BUILD_HDF5_HL_DLL) - !DEC$attributes dllexport :: h5ltpath_valid_f - !DEC$endif - ! - INTEGER(hid_t) , INTENT(IN) :: loc_id ! An identifier of an object in the file. - CHARACTER(LEN=*), INTENT(IN) :: path ! Path to the object to check, relative to loc_id. - LOGICAL , INTENT(IN) :: check_object_valid ! Indicates whether to check if the final component - ! of the path resolves to a valid object - LOGICAL , INTENT(OUT) :: path_valid ! Object status - INTEGER , INTENT(OUT) :: errcode ! Error code: 0 on success and -1 on failure - - INTEGER(size_t) :: pathlen - INTEGER :: check_object_valid_c - INTEGER :: status - - INTERFACE - INTEGER FUNCTION h5ltpath_valid_c(loc_id, path, pathlen, check_object_valid_c) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5LTPATH_VALID_C'::h5ltpath_valid_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: path - INTEGER(hid_t), INTENT(in) :: loc_id - CHARACTER(len=*), INTENT(in) :: path - INTEGER(size_t) :: pathlen - INTEGER :: check_object_valid_c - END FUNCTION h5ltpath_valid_c - END INTERFACE - - ! Initialize - path_valid = .FALSE. - errcode = 0 - - check_object_valid_c = 0 - IF(check_object_valid) check_object_valid_c = 1 - - pathlen = LEN(path) - status = h5ltpath_valid_c(loc_id, path, pathlen, check_object_valid_c) - - IF(status.EQ.1)THEN - path_valid = .TRUE. - ELSE IF(status.LT.0)THEN - errcode = -1 - ENDIF - - END SUBROUTINE h5ltpath_valid_f - ! end - ! -END MODULE H5LT - - - - - - diff --git a/hl/fortran/src/H5TBfc.c b/hl/fortran/src/H5TBfc.c index bf058fd..99a7800 100644 --- a/hl/fortran/src/H5TBfc.c +++ b/hl/fortran/src/H5TBfc.c @@ -37,7 +37,7 @@ *------------------------------------------------------------------------- */ int_f -nh5tbmake_table_c(size_t_f *namelen1, +h5tbmake_table_c(size_t_f *namelen1, _fcd name1, hid_t_f *loc_id, size_t_f *namelen, @@ -133,7 +133,7 @@ done: HDfree(c_field_types); return ret_value; -} /* end nh5tbmake_table_c() */ +} /* end h5tbmake_table_c() */ /*------------------------------------------------------------------------- * Function: h5tbwrite_field_name_c @@ -151,7 +151,7 @@ done: *------------------------------------------------------------------------- */ int_f -nh5tbwrite_field_name_c(hid_t_f *loc_id, +h5tbwrite_field_name_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -190,65 +190,6 @@ done: return ret_value; } -int_f -nh5tbwrite_field_name_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_name_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_name_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_name_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} /*------------------------------------------------------------------------- * Function: h5tbread_field_name_c @@ -266,7 +207,7 @@ nh5tbwrite_field_name_st_c(hid_t_f *loc_id, *------------------------------------------------------------------------- */ int_f -nh5tbread_field_name_c(hid_t_f *loc_id, +h5tbread_field_name_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -305,66 +246,6 @@ done: return ret_value; } -int_f -nh5tbread_field_name_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbread_field_name_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbread_field_name_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - -int_f -nh5tbread_field_name_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_name_c(loc_id, namelen, name, namelen1, field_name, - start, nrecords, type_size, buf); -} - /*------------------------------------------------------------------------- * Function: h5tbwrite_field_index_c * @@ -381,7 +262,7 @@ nh5tbread_field_name_st_c(hid_t_f *loc_id, *------------------------------------------------------------------------- */ int_f -nh5tbwrite_field_index_c(hid_t_f *loc_id, +h5tbwrite_field_index_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *field_index, @@ -416,62 +297,6 @@ done: return ret_value; } -int_f -nh5tbwrite_field_index_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_index_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_index_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbwrite_field_index_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbwrite_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - /*------------------------------------------------------------------------- * Function: h5tbread_field_index_c * @@ -488,7 +313,7 @@ nh5tbwrite_field_index_st_c(hid_t_f *loc_id, *------------------------------------------------------------------------- */ int_f -nh5tbread_field_index_c(hid_t_f *loc_id, +h5tbread_field_index_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, int_f *field_index, @@ -522,62 +347,6 @@ done: return ret_value; } -int_f -nh5tbread_field_index_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbread_field_index_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbread_field_index_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - -int_f -nh5tbread_field_index_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - int_f *field_index, - hsize_t_f *start, - hsize_t_f *nrecords, - size_t_f *type_size, - void *buf) -{ - return nh5tbread_field_index_c(loc_id, namelen, name, field_index, start, - nrecords, type_size, buf); -} - /*------------------------------------------------------------------------- * Function: h5tbinsert_field_c * @@ -594,7 +363,7 @@ nh5tbread_field_index_st_c(hid_t_f *loc_id, *------------------------------------------------------------------------- */ int_f -nh5tbinsert_field_c(hid_t_f *loc_id, +h5tbinsert_field_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -631,62 +400,6 @@ done: return ret_value; } -int_f -nh5tbinsert_field_int_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf) -{ - return nh5tbinsert_field_c(loc_id, namelen, name, namelen1, field_name, - field_type, position, buf); -} - -int_f -nh5tbinsert_field_fl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf) -{ - return nh5tbinsert_field_c(loc_id, namelen, name, namelen1, field_name, - field_type, position, buf); -} - -int_f -nh5tbinsert_field_dl_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf) -{ - return nh5tbinsert_field_c(loc_id, namelen, name, namelen1, field_name, - field_type, position, buf); -} - -int_f -nh5tbinsert_field_st_c(hid_t_f *loc_id, - size_t_f *namelen, - _fcd name, - size_t_f *namelen1, - _fcd field_name, - hid_t_f *field_type, - int_f *position, - void *buf) -{ - return nh5tbinsert_field_c(loc_id, namelen, name, namelen1, field_name, - field_type, position, buf); -} - /*------------------------------------------------------------------------- * Function: h5tbdelete_field_c * @@ -703,7 +416,7 @@ nh5tbinsert_field_st_c(hid_t_f *loc_id, *------------------------------------------------------------------------- */ int_f -nh5tbdelete_field_c(hid_t_f *loc_id, +h5tbdelete_field_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, size_t_f *namelen1, @@ -752,7 +465,7 @@ done: *------------------------------------------------------------------------- */ int_f -nh5tbget_table_info_c(hid_t_f *loc_id, +h5tbget_table_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *nfields, @@ -802,7 +515,7 @@ done: *------------------------------------------------------------------------- */ int_f -nh5tbget_field_info_c(hid_t_f *loc_id, +h5tbget_field_info_c(hid_t_f *loc_id, size_t_f *namelen, _fcd name, hsize_t_f *nfields, diff --git a/hl/fortran/src/H5TBff.F90 b/hl/fortran/src/H5TBff.F90 new file mode 100644 index 0000000..448d607 --- /dev/null +++ b/hl/fortran/src/H5TBff.F90 @@ -0,0 +1,848 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains FORTRAN interfaces for H5TB functions +! +! +! NOTES +! +! _____ __ __ _____ ____ _____ _______ _ _ _______ +! |_ _| \/ | __ \ / __ \| __ \__ __|/\ | \ | |__ __| +! **** | | | \ / | |__) | | | | |__) | | | / \ | \| | | | **** +! **** | | | |\/| | ___/| | | | _ / | | / /\ \ | . ` | | | **** +! **** _| |_| | | | | | |__| | | \ \ | |/ ____ \| |\ | | | **** +! |_____|_| |_|_| \____/|_| \_\ |_/_/ \_\_| \_| |_| +! +! If you add a new function here then you MUST add the function name to the +! Windows dll file 'hdf5_hl_fortrandll.def.in' in the hl/fortran/src directory. +! This is needed for Windows based operating systems. +! +#include "H5config_f.inc" + +MODULE h5tb_CONST + + USE, INTRINSIC :: ISO_C_BINDING + USE h5fortran_types + USE hdf5 + + INTERFACE h5tbwrite_field_name_f + MODULE PROCEDURE h5tbwrite_field_name_f_int + MODULE PROCEDURE h5tbwrite_field_name_f_string + END INTERFACE + + INTERFACE h5tbread_field_name_f + MODULE PROCEDURE h5tbread_field_name_f_int + MODULE PROCEDURE h5tbread_field_name_f_string + END INTERFACE + + INTERFACE h5tbwrite_field_index_f + MODULE PROCEDURE h5tbwrite_field_index_f_int + MODULE PROCEDURE h5tbwrite_field_index_f_string + END INTERFACE + + INTERFACE h5tbread_field_index_f + MODULE PROCEDURE h5tbread_field_index_f_int + MODULE PROCEDURE h5tbread_field_index_f_string + END INTERFACE + + INTERFACE h5tbinsert_field_f + MODULE PROCEDURE h5tbinsert_field_f_int + MODULE PROCEDURE h5tbinsert_field_f_string + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& + start,nrecords,type_size,buf) & + BIND(C,NAME='h5tbwrite_field_name_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + TYPE(C_PTR), VALUE :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + END FUNCTION h5tbwrite_field_name_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name, & + start,nrecords,type_size,buf) & + BIND(C,NAME='h5tbread_field_name_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + TYPE(C_PTR), VALUE :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + END FUNCTION h5tbread_field_name_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,buf) & + BIND(C,NAME='h5tbwrite_field_index_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + TYPE(C_PTR), VALUE :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + END FUNCTION h5tbwrite_field_index_c + END INTERFACE + + INTERFACE + INTEGER FUNCTION h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,buf) & + BIND(C,NAME='h5tbread_field_index_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + TYPE(C_PTR), VALUE :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + END FUNCTION h5tbread_field_index_c + END INTERFACE + + + INTERFACE + INTEGER FUNCTION h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,& + field_type,field_index,buf) & + BIND(C,NAME='h5tbinsert_field_c') + IMPORT :: C_CHAR, C_PTR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: field_name ! name of the field + INTEGER(hid_t), INTENT(in) :: field_type ! field type + INTEGER, INTENT(in) :: field_index ! field_index + TYPE(C_PTR), VALUE :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length length + END FUNCTION h5tbinsert_field_c + END INTERFACE + +CONTAINS + +!------------------------------------------------------------------------- +! Function: h5tbmake_table_f +! +! Purpose: Make a table +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 06, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbmake_table_f(table_title,& + loc_id,& + dset_name,& + nfields,& + nrecords,& + type_size,& + field_names,& + field_offset,& + field_types,& + chunk_size,& + compress,& + errcode ) + + IMPLICIT NONE + CHARACTER(LEN=*), INTENT(in) :: table_title ! name of the dataset + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: nfields ! fields + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(LEN=*), DIMENSION(1:nfields), INTENT(in) :: field_names ! field names + INTEGER(size_t), DIMENSION(1:nfields), INTENT(in) :: field_offset ! field offset + INTEGER(hid_t), DIMENSION(1:nfields), INTENT(in) :: field_types ! field types + INTEGER(hsize_t), INTENT(in) :: chunk_size ! chunk size + INTEGER, INTENT(in) :: compress ! compress + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + INTEGER :: errcode ! error code + INTEGER(size_t), DIMENSION(1:nfields) :: char_len_field_names ! field name lengths + INTEGER(size_t) :: max_char_size_field_names ! character len of field names + INTEGER(hsize_t) :: i ! general purpose integer + + INTERFACE + INTEGER FUNCTION h5tbmake_table_c(namelen1,& + table_title,& + loc_id,& + namelen,& + dset_name,& + nfields,& + nrecords,& + type_size,& + field_offset,& + field_types,& + chunk_size,& + compress,& + char_len_field_names,& + max_char_size_field_names,& + field_names) & + BIND(C,NAME='h5tbmake_table_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: table_title ! name of the dataset + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: nfields ! fields + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(KIND=C_CHAR), DIMENSION(nfields), INTENT(in) :: field_names ! field names + INTEGER(size_t), DIMENSION(nfields), INTENT(in) :: field_offset ! field offset + INTEGER(hid_t), DIMENSION(nfields), INTENT(in) :: field_types ! field types + INTEGER(hsize_t), INTENT(in) :: chunk_size ! chunk size + INTEGER, INTENT(in) :: compress ! compress + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + INTEGER(size_t), DIMENSION(nfields) :: char_len_field_names ! field name's lengths + INTEGER(size_t) :: max_char_size_field_names ! character len of field names + END FUNCTION h5tbmake_table_c + END INTERFACE + + namelen = LEN(dset_name) + namelen1 = LEN(table_title) + + ! Find the size of each character string in the array + DO i = 1, nfields + char_len_field_names(i) = LEN_TRIM(field_names(i)) + END DO + + max_char_size_field_names = LEN(field_names(1)) + + errcode = h5tbmake_table_c(namelen1,& + table_title,& + loc_id,& + namelen,& + dset_name,& + nfields,& + nrecords,& + type_size,& + field_offset,& + field_types,& + chunk_size,& + compress,& + char_len_field_names, & + max_char_size_field_names, & + field_names) + + END SUBROUTINE h5tbmake_table_f + +!------------------------------------------------------------------------- +! Function: h5tbwrite_field_name_f_int +! +! Purpose: Writes one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 12, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbwrite_field_name_f_int(loc_id,& + dset_name,& + field_name,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbwrite_field_name_f_int + + + SUBROUTINE h5tbwrite_field_name_f_string(loc_id,& + dset_name,& + field_name,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(LEN=*), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)(1:1)) + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbwrite_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbwrite_field_name_f_string + + +!------------------------------------------------------------------------- +! Function: h5tbread_field_name_f_int +! +! Purpose: Reads one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 12, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbread_field_name_f_int(loc_id,& + dset_name,& + field_name,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) ! name length + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbread_field_name_f_int + + SUBROUTINE h5tbread_field_name_f_string(loc_id,& + dset_name,& + field_name,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(LEN=*), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)(1:1)) + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbread_field_name_c(loc_id,namelen,dset_name,namelen1,field_name,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbread_field_name_f_string + + +!------------------------------------------------------------------------- +! Function: h5tbwrite_field_index_f_int +! +! Purpose: Writes one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 12, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbwrite_field_index_f_int(loc_id,& + dset_name,& + field_index,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + + namelen = LEN(dset_name) + + errcode = h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbwrite_field_index_f_int + + SUBROUTINE h5tbwrite_field_index_f_string(loc_id,& + dset_name,& + field_index,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(LEN=*), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)(1:1)) + namelen = LEN(dset_name) + + errcode = h5tbwrite_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbwrite_field_index_f_string + + +!------------------------------------------------------------------------- +! Function: h5tbread_field_index_f_int +! +! Purpose: Reads one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 12, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbread_field_index_f_int(loc_id,& + dset_name,& + field_index,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + namelen = LEN(dset_name) + + errcode = h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbread_field_index_f_int + + SUBROUTINE h5tbread_field_index_f_string(loc_id,& + dset_name,& + field_index,& + start,& + nrecords,& + type_size,& + buf,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER, INTENT(in) :: field_index ! index + INTEGER(hsize_t), INTENT(in) :: start ! start record + INTEGER(hsize_t), INTENT(in) :: nrecords ! records + INTEGER(size_t), INTENT(in) :: type_size ! type size + CHARACTER(LEN=*), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)(1:1)) + namelen = LEN(dset_name) + + errcode = h5tbread_field_index_c(loc_id,namelen,dset_name,field_index,& + start,nrecords,type_size,f_ptr) + + END SUBROUTINE h5tbread_field_index_f_string + +!------------------------------------------------------------------------- +! Function: h5tbinsert_field_f +! +! Purpose: Inserts one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 13, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbinsert_field_f_int(loc_id,& + dset_name,& + field_name,& + field_type,& + field_index,& + buf,& + errcode ) + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hid_t), INTENT(in) :: field_type ! field type + INTEGER, INTENT(in) :: field_index ! field_index + INTEGER, INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + INTEGER :: errcode ! error code + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)) + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,& + field_type,field_index,f_ptr) + + END SUBROUTINE h5tbinsert_field_f_int + + SUBROUTINE h5tbinsert_field_f_string(loc_id,& + dset_name,& + field_name,& + field_type,& + field_index,& + buf,& + errcode ) + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(hid_t), INTENT(in) :: field_type ! field type + INTEGER, INTENT(in) :: field_index ! field_index + CHARACTER(LEN=*), INTENT(in), DIMENSION(*), TARGET :: buf ! data buffer + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + INTEGER :: errcode ! error code + TYPE(C_PTR) :: f_ptr + + f_ptr = C_LOC(buf(1)(1:1)) + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbinsert_field_c(loc_id,namelen,dset_name,namelen1,field_name,& + field_type,field_index,f_ptr) + + END SUBROUTINE h5tbinsert_field_f_string + +!------------------------------------------------------------------------- +! Function: h5tbdelete_field_f +! +! Purpose: Inserts one field +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 13, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbdelete_field_f(loc_id,& + dset_name,& + field_name,& + errcode ) + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length + INTEGER :: errcode ! error code + + + INTERFACE + INTEGER FUNCTION h5tbdelete_field_c(loc_id,namelen,dset_name,namelen1,field_name) & + BIND(C,NAME='h5tbdelete_field_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(HID_T), INTENT(IN) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: dset_name ! name of the dataset + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(IN) :: field_name ! name of the field + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: namelen1 ! name length length + END FUNCTION h5tbdelete_field_c + END INTERFACE + + namelen = LEN(dset_name) + namelen1 = LEN(field_name) + + errcode = h5tbdelete_field_c(loc_id,namelen,dset_name,namelen1,field_name) + + END SUBROUTINE h5tbdelete_field_f + +!------------------------------------------------------------------------- +! Function: h5tbget_table_info_f +! +! Purpose: Gets the number of records and fields of a table +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 13, 2004 +! +! Comments: +! +! Modifications: +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbget_table_info_f(loc_id,& + dset_name,& + nfields,& + nrecords,& + errcode ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout):: nfields ! nfields + INTEGER(hsize_t), INTENT(inout):: nrecords ! nrecords + INTEGER :: errcode ! error code + INTEGER(size_t) :: namelen ! name length + + INTERFACE + INTEGER FUNCTION h5tbget_table_info_c(loc_id,namelen,dset_name,nfields,nrecords) & + BIND(C,NAME='h5tbget_table_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(inout):: nfields ! nfields + INTEGER(hsize_t), INTENT(inout):: nrecords ! nrecords + INTEGER(size_t) :: namelen ! name length + END FUNCTION h5tbget_table_info_c + END INTERFACE + + namelen = LEN(dset_name) + errcode = h5tbget_table_info_c(loc_id,namelen,dset_name,nfields,nrecords) + + END SUBROUTINE h5tbget_table_info_f + + +!------------------------------------------------------------------------- +! Function: h5tbget_field_info_f +! +! Purpose: Get information about fields +! +! Return: Success: 0, Failure: -1 +! +! Programmer: pvn@ncsa.uiuc.edu +! +! Date: October 13, 2004 +! +! Comments: +! +! Modifications: +! Added optional parameter for returning the maximum character length +! in the field name array. March 3, 2011 +! +!------------------------------------------------------------------------- + + SUBROUTINE h5tbget_field_info_f(loc_id,& + dset_name,& + nfields,& + field_names,& + field_sizes,& + field_offsets,& + type_size,& + errcode, maxlen_out ) + + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in) :: nfields ! nfields + CHARACTER(LEN=*), DIMENSION(nfields), INTENT(inout) :: field_names ! field names + INTEGER(size_t), DIMENSION(nfields), INTENT(inout) :: field_sizes ! field sizes + INTEGER(size_t), DIMENSION(nfields), INTENT(inout) :: field_offsets ! field offsets + INTEGER(size_t), INTENT(inout):: type_size ! type size + INTEGER :: errcode ! error code + INTEGER, OPTIONAL :: maxlen_out ! maximum character len of the field names + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t), DIMENSION(nfields) :: namelen2 ! name lengths + INTEGER(hsize_t) :: i ! general purpose integer + INTEGER(size_t) :: maxlen + INTEGER(size_t) :: c_maxlen_out + + INTERFACE + INTEGER FUNCTION h5tbget_field_info_c(loc_id,namelen,dset_name,nfields,& + field_sizes,field_offsets,type_size,namelen2, maxlen, field_names, c_maxlen_out) & + BIND(C,NAME='h5tbget_field_info_c') + IMPORT :: C_CHAR + IMPORT :: HID_T, SIZE_T, HSIZE_T + IMPLICIT NONE + INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier + CHARACTER(KIND=C_CHAR), DIMENSION(*), INTENT(in) :: dset_name ! name of the dataset + INTEGER(hsize_t), INTENT(in):: nfields ! nfields + CHARACTER(KIND=C_CHAR), DIMENSION(1:nfields), INTENT(inout) :: field_names ! field names + INTEGER(size_t), DIMENSION(1:nfields), INTENT(inout) :: field_sizes ! field sizes + INTEGER(size_t), DIMENSION(1:nfields), INTENT(inout) :: field_offsets ! field offsets + INTEGER(size_t), INTENT(inout):: type_size ! type size + INTEGER(size_t) :: namelen ! name length + INTEGER(size_t) :: maxlen ! maxiumum length of input field names + INTEGER(size_t), DIMENSION(1:nfields) :: namelen2 ! name lengths + INTEGER(size_t) :: c_maxlen_out ! maximum character length of a field array element + END FUNCTION h5tbget_field_info_c + END INTERFACE + + namelen = LEN(dset_name) + DO i = 1, nfields + namelen2(i) = LEN_TRIM(field_names(i)) + END DO + maxlen = LEN(field_names(1)) + c_maxlen_out = 0 + + errcode = h5tbget_field_info_c(loc_id, namelen,dset_name, nfields, & + field_sizes, field_offsets, type_size, namelen2, maxlen, field_names, c_maxlen_out) + + IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out + + END SUBROUTINE h5tbget_field_info_f + +END MODULE H5TB_CONST + + + + + + diff --git a/hl/fortran/src/H5TBff.f90 b/hl/fortran/src/H5TBff.f90 deleted file mode 100644 index 5846f49..0000000 --- a/hl/fortran/src/H5TBff.f90 +++ /dev/null @@ -1,1900 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains FORTRAN90 interfaces for H5TB functions -! - -MODULE h5tb -USE h5fortran_types -USE hdf5 - - -INTERFACE h5tbwrite_field_name_f - MODULE PROCEDURE h5tbwrite_field_name_f_int - MODULE PROCEDURE h5tbwrite_field_name_f_float - MODULE PROCEDURE h5tbwrite_field_name_f_double - MODULE PROCEDURE h5tbwrite_field_name_f_string -END INTERFACE - -INTERFACE h5tbread_field_name_f - MODULE PROCEDURE h5tbread_field_name_f_int - MODULE PROCEDURE h5tbread_field_name_f_float - MODULE PROCEDURE h5tbread_field_name_f_double - MODULE PROCEDURE h5tbread_field_name_f_string -END INTERFACE - -INTERFACE h5tbwrite_field_index_f - MODULE PROCEDURE h5tbwrite_field_index_f_int - MODULE PROCEDURE h5tbwrite_field_index_f_float - MODULE PROCEDURE h5tbwrite_field_index_f_double - MODULE PROCEDURE h5tbwrite_field_index_f_string -END INTERFACE - -INTERFACE h5tbread_field_index_f - MODULE PROCEDURE h5tbread_field_index_f_int - MODULE PROCEDURE h5tbread_field_index_f_float - MODULE PROCEDURE h5tbread_field_index_f_double - MODULE PROCEDURE h5tbread_field_index_f_string -END INTERFACE - - -INTERFACE h5tbinsert_field_f - MODULE PROCEDURE h5tbinsert_field_f_int - MODULE PROCEDURE h5tbinsert_field_f_float - MODULE PROCEDURE h5tbinsert_field_f_double - MODULE PROCEDURE h5tbinsert_field_f_string -END INTERFACE - - -CONTAINS - - -!------------------------------------------------------------------------- -! Function: h5tbmake_table_f -! -! Purpose: Make a table -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 06, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbmake_table_f(table_title,& - loc_id,& - dset_name,& - nfields,& - nrecords,& - type_size,& - field_names,& - field_offset,& - field_types,& - chunk_size,& - compress,& - errcode ) - - IMPLICIT NONE -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbmake_table_f -!DEC$endif -! - CHARACTER(LEN=*), INTENT(in) :: table_title ! name of the dataset - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(in) :: nfields ! fields - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), DIMENSION(1:nfields), INTENT(in) :: field_names ! field names - INTEGER(size_t), DIMENSION(1:nfields), INTENT(in) :: field_offset ! field offset - INTEGER(hid_t), DIMENSION(1:nfields), INTENT(in) :: field_types ! field types - INTEGER(hsize_t), INTENT(in) :: chunk_size ! chunk size - INTEGER, INTENT(in) :: compress ! compress - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - INTEGER(size_t), DIMENSION(1:nfields) :: char_len_field_names ! field name lengths - INTEGER(size_t) :: max_char_size_field_names ! character len of field names - INTEGER(hsize_t) :: i ! general purpose integer - - - INTERFACE - INTEGER FUNCTION h5tbmake_table_c(namelen1,& - table_title,& - loc_id,& - namelen,& - dset_name,& - nfields,& - nrecords,& - type_size,& - field_offset,& - field_types,& - chunk_size,& - compress,& - char_len_field_names,& - max_char_size_field_names,& - field_names) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBMAKE_TABLE_C'::h5tbmake_table_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: table_title - CHARACTER(LEN=*), INTENT(in) :: table_title ! name of the dataset - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(in) :: nfields ! fields - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), DIMENSION(nfields), INTENT(in) :: field_names ! field names - INTEGER(size_t), DIMENSION(nfields), INTENT(in) :: field_offset ! field offset - INTEGER(hid_t), DIMENSION(nfields), INTENT(in) :: field_types ! field types - INTEGER(hsize_t), INTENT(in) :: chunk_size ! chunk size - INTEGER, INTENT(in) :: compress ! compress - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER(size_t), DIMENSION(nfields) :: char_len_field_names ! field name's lengths - INTEGER(size_t) :: max_char_size_field_names ! character len of field names - END FUNCTION h5tbmake_table_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(table_title) - - ! Find the size of each character string in the array - DO i = 1, nfields - char_len_field_names(i) = LEN_TRIM(field_names(i)) - END DO - - max_char_size_field_names = LEN(field_names(1)) - - errcode = h5tbmake_table_c(namelen1,& - table_title,& - loc_id,& - namelen,& - dset_name,& - nfields,& - nrecords,& - type_size,& - field_offset,& - field_types,& - chunk_size,& - compress,& - char_len_field_names, & - max_char_size_field_names, & - field_names) - -END SUBROUTINE h5tbmake_table_f - - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_name_f_int -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_name_f_int(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_name_f_int -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_name_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_NAME_INT_C'::h5tbwrite_field_name_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbwrite_field_name_int_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbwrite_field_name_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_name_f_int - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_name_f_float -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_name_f_float(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_name_f_float -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_name_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_NAME_FL_C'::h5tbwrite_field_name_fl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbwrite_field_name_fl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbwrite_field_name_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_name_f_float - - - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_name_f_double -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_name_f_double(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_name_f_double -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_name_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_NAME_DL_C'::h5tbwrite_field_name_dl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbwrite_field_name_dl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbwrite_field_name_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_name_f_double - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_name_f_string -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_name_f_string(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_name_f_string -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_name_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_NAME_ST_C'::h5tbwrite_field_name_st_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbwrite_field_name_st_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbwrite_field_name_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_name_f_string - - -!------------------------------------------------------------------------- -! Function: h5tbread_field_name_f_int -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_name_f_int(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_name_f_int -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_name_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_NAME_INT_C'::h5tbread_field_name_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbread_field_name_int_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbread_field_name_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_name_f_int - -!------------------------------------------------------------------------- -! Function: h5tbread_field_name_f_float -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_name_f_float(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_name_f_float -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_name_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_NAME_FL_C'::h5tbread_field_name_fl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbread_field_name_fl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbread_field_name_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_name_f_float - -!------------------------------------------------------------------------- -! Function: h5tbread_field_name_f_double -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_name_f_double(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_name_f_double -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_name_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_NAME_DL_C'::h5tbread_field_name_dl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbread_field_name_dl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbread_field_name_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_name_f_double - -!------------------------------------------------------------------------- -! Function: h5tbread_field_name_f_string -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_name_f_string(loc_id,& - dset_name,& - field_name,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_name_f_string -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_name_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_NAME_ST_C'::h5tbread_field_name_st_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - END FUNCTION h5tbread_field_name_st_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbread_field_name_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_name_f_string - - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_index_f_int -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_index_f_int(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_index_f_int -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_index_int_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_INDEX_INT_C'::h5tbwrite_field_index_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbwrite_field_index_int_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbwrite_field_index_int_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_index_f_int - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_index_f_float -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_index_f_float(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_index_f_float -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_index_fl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_INDEX_FL_C'::h5tbwrite_field_index_fl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbwrite_field_index_fl_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbwrite_field_index_fl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_index_f_float - - - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_index_f_double -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_index_f_double(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_index_f_double -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_index_dl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_INDEX_DL_C'::h5tbwrite_field_index_dl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbwrite_field_index_dl_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbwrite_field_index_dl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_index_f_double - -!------------------------------------------------------------------------- -! Function: h5tbwrite_field_index_f_string -! -! Purpose: Writes one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbwrite_field_index_f_string(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbwrite_field_index_f_string -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbwrite_field_index_st_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBWRITE_FIELD_INDEX_ST_C'::h5tbwrite_field_index_st_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbwrite_field_index_st_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbwrite_field_index_st_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbwrite_field_index_f_string - - -!------------------------------------------------------------------------- -! Function: h5tbread_field_index_f_int -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_index_f_int(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport ::h5tbread_field_index_f_int -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_index_int_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_INDEX_INT_C'::h5tbread_field_index_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbread_field_index_int_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbread_field_index_int_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_index_f_int - -!------------------------------------------------------------------------- -! Function: h5tbread_field_index_f_float -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_index_f_float(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_index_f_float -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_index_fl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_INDEX_FL_C'::h5tbread_field_index_fl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbread_field_index_fl_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbread_field_index_fl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_index_f_float - -!------------------------------------------------------------------------- -! Function: h5tbread_field_index_f_double -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_index_f_double(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_index_f_double -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_index_dl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_INDEX_DL_C'::h5tbread_field_index_dl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbread_field_index_dl_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbread_field_index_dl_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_index_f_double - -!------------------------------------------------------------------------- -! Function: h5tbread_field_index_f_string -! -! Purpose: Reads one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 12, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbread_field_index_f_string(loc_id,& - dset_name,& - field_index,& - start,& - nrecords,& - type_size,& - buf,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbread_field_index_f_string -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbread_field_index_st_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBREAD_FIELD_INDEX_ST_C'::h5tbread_field_index_st_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER, INTENT(in) :: field_index ! index - INTEGER(hsize_t), INTENT(in) :: start ! start record - INTEGER(hsize_t), INTENT(in) :: nrecords ! records - INTEGER(size_t), INTENT(in) :: type_size ! type size - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbread_field_index_st_c - END INTERFACE - - namelen = LEN(dset_name) - - errcode = h5tbread_field_index_st_c(loc_id,namelen,dset_name,field_index,& - start,nrecords,type_size,buf) - -END SUBROUTINE h5tbread_field_index_f_string - - -!------------------------------------------------------------------------- -! Function: h5tbinsert_field_f_int -! -! Purpose: Inserts one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbinsert_field_f_int(loc_id,& - dset_name,& - field_name,& - field_type,& - field_index,& - buf,& - errcode ) - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbinsert_field_f_int -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - - - INTERFACE - INTEGER FUNCTION h5tbinsert_field_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBINSERT_FIELD_INT_C'::h5tbinsert_field_int_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - INTEGER, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length length - END FUNCTION h5tbinsert_field_int_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbinsert_field_int_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - -END SUBROUTINE h5tbinsert_field_f_int - - - -!------------------------------------------------------------------------- -! Function: h5tbinsert_field_f_float -! -! Purpose: Inserts one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbinsert_field_f_float(loc_id,& - dset_name,& - field_name,& - field_type,& - field_index,& - buf,& - errcode ) - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbinsert_field_f_float -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - - - INTERFACE - INTEGER FUNCTION h5tbinsert_field_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBINSERT_FIELD_FL_C'::h5tbinsert_field_fl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - REAL, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length length - END FUNCTION h5tbinsert_field_fl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbinsert_field_fl_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - -END SUBROUTINE h5tbinsert_field_f_float - - - -!------------------------------------------------------------------------- -! Function: h5tbinsert_field_f_double -! -! Purpose: Inserts one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbinsert_field_f_double(loc_id,& - dset_name,& - field_name,& - field_type,& - field_index,& - buf,& - errcode ) - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbinsert_field_f_double -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - - - INTERFACE - INTEGER FUNCTION h5tbinsert_field_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBINSERT_FIELD_DL_C'::h5tbinsert_field_dl_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - DOUBLE PRECISION, INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length length - END FUNCTION h5tbinsert_field_dl_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbinsert_field_dl_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - -END SUBROUTINE h5tbinsert_field_f_double - - - - -!------------------------------------------------------------------------- -! Function: h5tbinsert_field_f_string -! -! Purpose: Inserts one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbinsert_field_f_string(loc_id,& - dset_name,& - field_name,& - field_type,& - field_index,& - buf,& - errcode ) - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbinsert_field_f_string -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - - - INTERFACE - INTEGER FUNCTION h5tbinsert_field_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBINSERT_FIELD_ST_C'::h5tbinsert_field_st_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(hid_t), INTENT(in) :: field_type ! field type - INTEGER, INTENT(in) :: field_index ! field_index - CHARACTER(LEN=*), INTENT(in), DIMENSION(*) :: buf ! data buffer - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length length - END FUNCTION h5tbinsert_field_st_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbinsert_field_st_c(loc_id,namelen,dset_name,namelen1,field_name,& - field_type,field_index,buf) - -END SUBROUTINE h5tbinsert_field_f_string - - - - -!------------------------------------------------------------------------- -! Function: h5tbdelete_field_f -! -! Purpose: Inserts one field -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbdelete_field_f(loc_id,& - dset_name,& - field_name,& - errcode ) - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbdelete_field_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(in) :: field_name ! name of the field - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length - INTEGER :: errcode ! error code - - - INTERFACE - INTEGER FUNCTION h5tbdelete_field_c(loc_id,namelen,dset_name,namelen1,field_name) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBDELETE_FIELD_C'::h5tbdelete_field_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - !DEC$ATTRIBUTES reference :: field_name - INTEGER(HID_T), INTENT(IN) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(IN) :: dset_name ! name of the dataset - CHARACTER(LEN=*), INTENT(IN) :: field_name ! name of the field - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: namelen1 ! name length length - END FUNCTION h5tbdelete_field_c - END INTERFACE - - namelen = LEN(dset_name) - namelen1 = LEN(field_name) - - errcode = h5tbdelete_field_c(loc_id,namelen,dset_name,namelen1,field_name) - -END SUBROUTINE h5tbdelete_field_f - - - -!------------------------------------------------------------------------- -! Function: h5tbget_table_info_f -! -! Purpose: Gets the number of records and fields of a table -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbget_table_info_f(loc_id,& - dset_name,& - nfields,& - nrecords,& - errcode ) - - IMPLICIT NONE - -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbget_table_info_f -!DEC$endif -! - - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(inout):: nfields ! nfields - INTEGER(hsize_t), INTENT(inout):: nrecords ! nrecords - INTEGER :: errcode ! error code - INTEGER(size_t) :: namelen ! name length - - INTERFACE - INTEGER FUNCTION h5tbget_table_info_c(loc_id,namelen,dset_name,nfields,nrecords) - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBGET_TABLE_INFO_C'::h5tbget_table_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(inout):: nfields ! nfields - INTEGER(hsize_t), INTENT(inout):: nrecords ! nrecords - INTEGER(size_t) :: namelen ! name length - END FUNCTION h5tbget_table_info_c - END INTERFACE - - namelen = LEN(dset_name) - errcode = h5tbget_table_info_c(loc_id,namelen,dset_name,nfields,nrecords) - -END SUBROUTINE h5tbget_table_info_f - - -!------------------------------------------------------------------------- -! Function: h5tbget_field_info_f -! -! Purpose: Get information about fields -! -! Return: Success: 0, Failure: -1 -! -! Programmer: pvn@ncsa.uiuc.edu -! -! Date: October 13, 2004 -! -! Comments: -! -! Modifications: -! Added optional parameter for returning the maximum character length -! in the field name array. March 3, 2011 -! -!------------------------------------------------------------------------- - -SUBROUTINE h5tbget_field_info_f(loc_id,& - dset_name,& - nfields,& - field_names,& - field_sizes,& - field_offsets,& - type_size,& - errcode, maxlen_out ) - - IMPLICIT NONE -! -!This definition is needed for Windows DLLs -!DEC$if defined(BUILD_HDF5_HL_DLL) -!DEC$attributes dllexport :: h5tbget_field_info_f -!DEC$endif -! - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(in) :: nfields ! nfields - CHARACTER(LEN=*), DIMENSION(nfields), INTENT(inout) :: field_names ! field names - INTEGER(size_t), DIMENSION(nfields), INTENT(inout) :: field_sizes ! field sizes - INTEGER(size_t), DIMENSION(nfields), INTENT(inout) :: field_offsets ! field offsets - INTEGER(size_t), INTENT(inout):: type_size ! type size - INTEGER :: errcode ! error code - INTEGER, OPTIONAL :: maxlen_out ! maximum character len of the field names - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t), DIMENSION(nfields) :: namelen2 ! name lengths - INTEGER(hsize_t) :: i ! general purpose integer - INTEGER(size_t) :: maxlen - INTEGER(size_t) :: c_maxlen_out - - INTERFACE - INTEGER FUNCTION h5tbget_field_info_c(loc_id,namelen,dset_name,nfields,& - field_sizes,field_offsets,type_size,namelen2, maxlen, field_names, c_maxlen_out) - - USE h5global - IMPLICIT NONE - !DEC$IF DEFINED(HDF5F90_WINDOWS) - !DEC$ATTRIBUTES C,reference,decorate,alias:'H5TBGET_FIELD_INFO_C'::h5tbget_field_info_c - !DEC$ENDIF - !DEC$ATTRIBUTES reference :: dset_name - INTEGER(hid_t), INTENT(in) :: loc_id ! file or group identifier - CHARACTER(LEN=*), INTENT(in) :: dset_name ! name of the dataset - INTEGER(hsize_t), INTENT(in):: nfields ! nfields - CHARACTER(LEN=*), DIMENSION(1:nfields), INTENT(inout) :: field_names ! field names - INTEGER(size_t), DIMENSION(1:nfields), INTENT(inout) :: field_sizes ! field sizes - INTEGER(size_t), DIMENSION(1:nfields), INTENT(inout) :: field_offsets ! field offsets - INTEGER(size_t), INTENT(inout):: type_size ! type size - INTEGER(size_t) :: namelen ! name length - INTEGER(size_t) :: maxlen ! maxiumum length of input field names - INTEGER(size_t), DIMENSION(1:nfields) :: namelen2 ! name lengths - INTEGER(size_t) :: c_maxlen_out ! maximum character length of a field array element - END FUNCTION h5tbget_field_info_c - END INTERFACE - - namelen = LEN(dset_name) - DO i = 1, nfields - namelen2(i) = LEN_TRIM(field_names(i)) - END DO - maxlen = LEN(field_names(1)) - c_maxlen_out = 0 - - errcode = h5tbget_field_info_c(loc_id, namelen,dset_name, nfields, & - field_sizes, field_offsets, type_size, namelen2, maxlen, field_names, c_maxlen_out) - - IF(PRESENT(maxlen_out)) maxlen_out = c_maxlen_out - -END SUBROUTINE h5tbget_field_info_f - -END MODULE H5TB - - - - - - diff --git a/hl/fortran/src/Makefile.am b/hl/fortran/src/Makefile.am index c8c4541..6457f81 100644 --- a/hl/fortran/src/Makefile.am +++ b/hl/fortran/src/Makefile.am @@ -42,12 +42,12 @@ endif # Source files for the library #if BUILD_PARALLEL_CONDITIONAL -# PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.f90 +# PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.F90 #endif # List sources to include in the HDF5 HL Fortran library. -libhdf5hl_fortran_la_SOURCES=H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \ - H5DSff.f90 H5LTff.f90 H5IMff.f90 H5TBff.f90 +libhdf5hl_fortran_la_SOURCES=H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \ + H5DSff.F90 H5LTff.F90 H5TBff.F90 H5IMff.F90 H5LTff_gen.F90 H5TBff_gen.F90 # HDF5 HL Fortran library depends on HDF5 Library. libhdf5hl_fortran_la_LIBADD=$(LIBH5_HL) $(LIBH5F) @@ -60,7 +60,7 @@ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ - $(RM) *.$(F9XMODEXT); \ + $(RM) *.$(F9XMODEXT) H5LTff_gen.F90 H5TBff_gen.F90; \ fi install-data-local: @@ -75,13 +75,31 @@ uninstall-local: fi; \ fi +# These are the helper programs we need to build. +noinst_PROGRAMS = H5HL_buildiface + +# H5HL_buildiface.F90 generates all the APIs that have a KIND type associated +# with them. + +H5LTff_gen.F90: H5HL_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5HL_buildiface$(EXEEXT) + +H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) + +#H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) + +# H5HL_buildiface.F90 is included in the distribution, and Automake knows +# how to compile a fortran program given its sources. + +H5HL_buildiface_SOURCES = H5HL_buildiface.F90 # Hardcode the dependencies of these files. There isn't a known way of # determining this automagically (like we do with the C files). So, when # doing a parallel make, some modules could be made way before the # modules they depend upon are actually made. *sigh* -H5DSff.lo: $(srcdir)/H5DSff.f90 -H5LTff.lo: $(srcdir)/H5LTff.f90 -H5IMff.lo: $(srcdir)/H5IMff.f90 -H5TBff.lo: $(srcdir)/H5TBff.f90 - +H5DSff.lo: $(srcdir)/H5DSff.F90 +H5LTff.lo: $(srcdir)/H5LTff.F90 +H5IMff.lo: $(srcdir)/H5IMff.F90 +H5TBff.lo: $(srcdir)/H5TBff.F90 +H5LTff_gen.lo: H5LTff.lo H5LTff_gen.F90 +H5TBff_gen.lo: H5TBff.lo H5LTff_gen.F90 H5TBff_gen.F90 include $(top_srcdir)/config/conclude.am diff --git a/hl/fortran/src/Makefile.in b/hl/fortran/src/Makefile.in index c053566..614cb16 100644 --- a/hl/fortran/src/Makefile.in +++ b/hl/fortran/src/Makefile.in @@ -31,6 +31,7 @@ # # HDF5 High-Level Fortran Makefile(.in) + VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ @@ -105,6 +106,7 @@ DIST_COMMON = $(top_srcdir)/config/commence.am \ # want to build a shared C library and a static Fortran library. If so, # pass the -static flag to the library linker. @FORTRAN_SHARED_CONDITIONAL_FALSE@am__append_1 = -static +noinst_PROGRAMS = H5HL_buildiface$(EXEEXT) TESTS = subdir = hl/fortran/src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 @@ -113,7 +115,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -147,7 +150,8 @@ am__installdirs = "$(DESTDIR)$(libdir)" LTLIBRARIES = $(lib_LTLIBRARIES) libhdf5hl_fortran_la_DEPENDENCIES = $(LIBH5_HL) $(LIBH5F) am_libhdf5hl_fortran_la_OBJECTS = H5DSfc.lo H5LTfc.lo H5IMfc.lo \ - H5IMcc.lo H5TBfc.lo H5DSff.lo H5LTff.lo H5IMff.lo H5TBff.lo + H5IMcc.lo H5TBfc.lo H5DSff.lo H5LTff.lo H5TBff.lo H5IMff.lo \ + H5LTff_gen.lo H5TBff_gen.lo libhdf5hl_fortran_la_OBJECTS = $(am_libhdf5hl_fortran_la_OBJECTS) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) @@ -157,6 +161,10 @@ libhdf5hl_fortran_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=FC \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(FCLD) \ $(AM_FCFLAGS) $(FCFLAGS) $(libhdf5hl_fortran_la_LDFLAGS) \ $(LDFLAGS) -o $@ +PROGRAMS = $(noinst_PROGRAMS) +am_H5HL_buildiface_OBJECTS = H5HL_buildiface.$(OBJEXT) +H5HL_buildiface_OBJECTS = $(am_H5HL_buildiface_OBJECTS) +H5HL_buildiface_LDADD = $(LDADD) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false @@ -169,10 +177,28 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f +PPFCCOMPILE = $(FC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS) +LTPPFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(FC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_FCFLAGS) $(FCFLAGS) +AM_V_PPFC = $(am__v_PPFC_@AM_V@) +am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@) +am__v_PPFC_0 = @echo " PPFC " $@; +am__v_PPFC_1 = +FCLD = $(FC) +FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_FCLD = $(am__v_FCLD_@AM_V@) +am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) +am__v_FCLD_0 = @echo " FCLD " $@; +am__v_FCLD_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ @@ -191,23 +217,9 @@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = -FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS) -LTFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS) -AM_V_FC = $(am__v_FC_@AM_V@) -am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@) -am__v_FC_0 = @echo " FC " $@; -am__v_FC_1 = -FCLD = $(FC) -FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_FCLD = $(am__v_FCLD_@AM_V@) -am__v_FCLD_ = $(am__v_FCLD_@AM_DEFAULT_V@) -am__v_FCLD_0 = @echo " FCLD " $@; -am__v_FCLD_1 = -SOURCES = $(libhdf5hl_fortran_la_SOURCES) -DIST_SOURCES = $(libhdf5hl_fortran_la_SOURCES) +SOURCES = $(libhdf5hl_fortran_la_SOURCES) $(H5HL_buildiface_SOURCES) +DIST_SOURCES = $(libhdf5hl_fortran_la_SOURCES) \ + $(H5HL_buildiface_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -469,14 +481,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -486,13 +505,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -534,6 +552,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ @@ -691,17 +721,23 @@ libhdf5hl_fortran_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVI # Source files for the library #if BUILD_PARALLEL_CONDITIONAL -# PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.f90 +# PARALLEL_COND_SRC=HDFDmpiof.c HDF5mpio.F90 #endif # List sources to include in the HDF5 HL Fortran library. -libhdf5hl_fortran_la_SOURCES = H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \ - H5DSff.f90 H5LTff.f90 H5IMff.f90 H5TBff.f90 +libhdf5hl_fortran_la_SOURCES = H5DSfc.c H5LTfc.c H5IMfc.c H5IMcc.c H5TBfc.c \ + H5DSff.F90 H5LTff.F90 H5TBff.F90 H5IMff.F90 H5LTff_gen.F90 H5TBff_gen.F90 # HDF5 HL Fortran library depends on HDF5 Library. libhdf5hl_fortran_la_LIBADD = $(LIBH5_HL) $(LIBH5F) +#H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) + +# H5HL_buildiface.F90 is included in the distribution, and Automake knows +# how to compile a fortran program given its sources. +H5HL_buildiface_SOURCES = H5HL_buildiface.F90 + # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and @@ -724,7 +760,7 @@ TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: -.SUFFIXES: .c .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs +.SUFFIXES: .F90 .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -795,6 +831,19 @@ clean-libLTLIBRARIES: libhdf5hl_fortran.la: $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_DEPENDENCIES) $(EXTRA_libhdf5hl_fortran_la_DEPENDENCIES) $(AM_V_FCLD)$(libhdf5hl_fortran_la_LINK) -rpath $(libdir) $(libhdf5hl_fortran_la_OBJECTS) $(libhdf5hl_fortran_la_LIBADD) $(LIBS) +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +H5HL_buildiface$(EXEEXT): $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_DEPENDENCIES) $(EXTRA_H5HL_buildiface_DEPENDENCIES) + @rm -f H5HL_buildiface$(EXEEXT) + $(AM_V_FCLD)$(FCLINK) $(H5HL_buildiface_OBJECTS) $(H5HL_buildiface_LDADD) $(LIBS) + mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -807,6 +856,15 @@ distclean-compile: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5LTfc.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5TBfc.Plo@am__quote@ +.F90.o: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ $< + +.F90.obj: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.F90.lo: + $(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $< + .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @@ -828,15 +886,6 @@ distclean-compile: @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< -.f90.o: - $(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) $< - -.f90.obj: - $(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'` - -.f90.lo: - $(AM_V_FC)$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $< - mostlyclean-libtool: -rm -f *.lo @@ -1073,7 +1122,7 @@ distdir: $(DISTFILES) check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am -all-am: Makefile $(LTLIBRARIES) all-local +all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local installdirs: for dir in "$(DESTDIR)$(libdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ @@ -1114,7 +1163,7 @@ maintainer-clean-generic: clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \ - mostlyclean-am + clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) @@ -1187,8 +1236,8 @@ uninstall-am: uninstall-libLTLIBRARIES uninstall-local .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ check-am clean clean-generic clean-libLTLIBRARIES \ - clean-libtool clean-local cscopelist-am ctags ctags-am \ - distclean distclean-compile distclean-generic \ + clean-libtool clean-local clean-noinstPROGRAMS cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-local distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local install-dvi \ @@ -1236,7 +1285,7 @@ maintainer-clean-local: clean-local distclean-local: clean-local clean-local: @if test -n "$(F9XMODEXT)" && test "X$(F9XMODEXT)" != "Xo"; then \ - $(RM) *.$(F9XMODEXT); \ + $(RM) *.$(F9XMODEXT) H5LTff_gen.F90 H5TBff_gen.F90; \ fi install-data-local: @@ -1251,14 +1300,23 @@ uninstall-local: fi; \ fi +# H5HL_buildiface.F90 generates all the APIs that have a KIND type associated +# with them. + +H5LTff_gen.F90: H5HL_buildiface$(EXEEXT) + $(RUNSERIAL) ./H5HL_buildiface$(EXEEXT) + +H5TBff_gen.F90: H5HL_buildiface$(EXEEXT) # Hardcode the dependencies of these files. There isn't a known way of # determining this automagically (like we do with the C files). So, when # doing a parallel make, some modules could be made way before the # modules they depend upon are actually made. *sigh* -H5DSff.lo: $(srcdir)/H5DSff.f90 -H5LTff.lo: $(srcdir)/H5LTff.f90 -H5IMff.lo: $(srcdir)/H5IMff.f90 -H5TBff.lo: $(srcdir)/H5TBff.f90 +H5DSff.lo: $(srcdir)/H5DSff.F90 +H5LTff.lo: $(srcdir)/H5LTff.F90 +H5IMff.lo: $(srcdir)/H5IMff.F90 +H5TBff.lo: $(srcdir)/H5TBff.F90 +H5LTff_gen.lo: H5LTff.lo H5LTff_gen.F90 +H5TBff_gen.lo: H5TBff.lo H5LTff_gen.F90 H5TBff_gen.F90 # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. diff --git a/hl/fortran/src/hdf5_hl_fortrandll.def.in b/hl/fortran/src/hdf5_hl_fortrandll.def.in new file mode 100644 index 0000000..9a1231a --- /dev/null +++ b/hl/fortran/src/hdf5_hl_fortrandll.def.in @@ -0,0 +1,88 @@ +EXPORTS +; H5DS +H5DS_mp_H5DSSET_SCALE_F +H5DS_mp_H5DSATTACH_SCALE_F +H5DS_mp_H5DSDETACH_SCALE_F +H5DS_mp_H5DSIS_ATTACHED_F +H5DS_mp_H5DSIS_SCALE_F +H5DS_mp_H5DSSET_LABEL_F +H5DS_mp_H5DSGET_LABEL_F +H5DS_mp_H5DSGET_SCALE_NAME_F +H5DS_mp_H5DSGET_NUM_SCALES_F +; H5IM +H5IM_mp_H5IMMAKE_IMAGE_8BIT_F +H5IM_mp_H5IMREAD_IMAGE_F +H5IM_mp_H5IMMAKE_IMAGE_24BIT_F +H5IM_mp_H5IMGET_IMAGE_INFO_F +H5IM_mp_H5IMIS_IMAGE_F +H5IM_mp_H5IMMAKE_PALETTE_F +H5IM_mp_H5IMLINK_PALETTE_F +H5IM_mp_H5IMUNLINK_PALETTE_F +H5IM_mp_H5IMGET_NPALETTES_F +H5IM_mp_H5IMGET_PALETTE_INFO_F +H5IM_mp_H5IMGET_PALETTE_F +H5IM_mp_H5IMIS_PALETTE_F +; H5LT +H5LT_CONST_mp_H5LTMAKE_DATASET_F_PTR +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT1 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT2 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT3 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT4 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT5 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT6 +H5LT_CONST_mp_H5LTMAKE_DATASET_F_INT7 +H5LT_CONST_mp_H5LTREAD_DATASET_F_PTR +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT1 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT2 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT3 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT4 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT5 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT6 +H5LT_CONST_mp_H5LTREAD_DATASET_F_INT7 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_1 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_2 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_3 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_4 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_5 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_6 +H5LT_CONST_mp_H5LTMAKE_DATASET_INT_F_7 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_1 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_2 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_3 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_4 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_5 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_6 +H5LT_CONST_mp_H5LTREAD_DATASET_INT_F_7 +H5LT_CONST_mp_H5LTMAKE_DATASET_STRING_F +H5LT_CONST_mp_H5LTREAD_DATASET_STRING_F +H5LT_CONST_mp_H5LTSET_ATTRIBUTE_F +H5LT_CONST_mp_H5LTSET_ATTRIBUTE_INT_F +H5LT_CONST_mp_H5LTSET_ATTRIBUTE_FLOAT_F +H5LT_CONST_mp_H5LTSET_ATTRIBUTE_DOUBLE_F +H5LT_CONST_mp_H5LTSET_ATTRIBUTE_STRING_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_INT_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_FLOAT_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_DOUBLE_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_STRING_F +H5LT_CONST_mp_H5LTGET_DATASET_NDIMS_F +H5LT_CONST_mp_H5LTFIND_DATASET_F +H5LT_CONST_mp_H5LTGET_DATASET_INFO_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_NDIMS_F +H5LT_CONST_mp_H5LTGET_ATTRIBUTE_INFO_F +H5LT_CONST_mp_H5LTPATH_VALID_F +; H5TB +H5TB_CONST_mp_H5TBMAKE_TABLE_F +H5TB_CONST_mp_H5TBWRITE_FIELD_NAME_F_INT +H5TB_CONST_mp_H5TBWRITE_FIELD_NAME_F_STRING +H5TB_CONST_mp_H5TBREAD_FIELD_NAME_F_INT +H5TB_CONST_mp_H5TBREAD_FIELD_NAME_F_STRING +H5TB_CONST_mp_H5TBWRITE_FIELD_INDEX_F_INT +H5TB_CONST_mp_H5TBWRITE_FIELD_INDEX_F_STRING +H5TB_CONST_mp_H5TBREAD_FIELD_INDEX_F_INT +H5TB_CONST_mp_H5TBREAD_FIELD_INDEX_F_STRING +H5TB_CONST_mp_H5TBINSERT_FIELD_F_INT +H5TB_CONST_mp_H5TBINSERT_FIELD_F_STRING +H5TB_CONST_mp_H5TBDELETE_FIELD_F +H5TB_CONST_mp_H5TBGET_TABLE_INFO_F +H5TB_CONST_mp_H5TBGET_FIELD_INFO_F diff --git a/hl/fortran/test/Makefile.am b/hl/fortran/test/Makefile.am index fa3a803..18fdaf3 100644 --- a/hl/fortran/test/Makefile.am +++ b/hl/fortran/test/Makefile.am @@ -39,10 +39,10 @@ check_PROGRAMS=$(TEST_PROG) LDADD= $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5) # Source files for the programs -tstds_SOURCES=tstds.f90 -tstlite_SOURCES=tstlite.f90 -tstimage_SOURCES=tstimage.f90 -tsttable_SOURCES=tsttable.f90 +tstds_SOURCES=tstds.F90 +tstlite_SOURCES=tstlite.F90 +tstimage_SOURCES=tstimage.F90 +tsttable_SOURCES=tsttable.F90 # Temporary files. CHECK_CLEANFILES+=dsetf[1-5].h5 f1img.h5 f1tab.h5 tstds.h5 diff --git a/hl/fortran/test/Makefile.in b/hl/fortran/test/Makefile.in index 6725d26..ee4b206 100644 --- a/hl/fortran/test/Makefile.in +++ b/hl/fortran/test/Makefile.in @@ -112,7 +112,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = tstds$(EXEEXT) tstlite$(EXEEXT) tstimage$(EXEEXT) \ @@ -149,14 +150,17 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS) -LTFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS) -AM_V_FC = $(am__v_FC_@AM_V@) -am__v_FC_ = $(am__v_FC_@AM_DEFAULT_V@) -am__v_FC_0 = @echo " FC " $@; -am__v_FC_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src +PPFCCOMPILE = $(FC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_FCFLAGS) $(FCFLAGS) +LTPPFCCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(FC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_FCFLAGS) $(FCFLAGS) +AM_V_PPFC = $(am__v_PPFC_@AM_V@) +am__v_PPFC_ = $(am__v_PPFC_@AM_DEFAULT_V@) +am__v_PPFC_0 = @echo " PPFC " $@; +am__v_PPFC_1 = FCLD = $(FC) FCLINK = $(LIBTOOL) $(AM_V_lt) --tag=FC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \ @@ -460,14 +464,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -477,13 +488,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -525,6 +535,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ @@ -674,10 +696,10 @@ TEST_PROG = tstds tstlite tstimage tsttable LDADD = $(LIBH5F_HL) $(LIBH5F) $(LIBH5_HL) $(LIBHDF5) # Source files for the programs -tstds_SOURCES = tstds.f90 -tstlite_SOURCES = tstlite.f90 -tstimage_SOURCES = tstimage.f90 -tsttable_SOURCES = tsttable.f90 +tstds_SOURCES = tstds.F90 +tstlite_SOURCES = tstlite.F90 +tstimage_SOURCES = tstimage.F90 +tsttable_SOURCES = tsttable.F90 # Mark this directory as part of the Fortran API (this affects output # from tests in conclude.am) @@ -705,7 +727,7 @@ TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: -.SUFFIXES: .f90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs +.SUFFIXES: .F90 .lo .log .o .obj .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -769,14 +791,14 @@ mostlyclean-compile: distclean-compile: -rm -f *.tab.c -.f90.o: - $(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) $< +.F90.o: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ $< -.f90.obj: - $(AM_V_FC)$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'` +.F90.obj: + $(AM_V_PPFC)$(PPFCCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` -.f90.lo: - $(AM_V_FC)$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $< +.F90.lo: + $(AM_V_PPFC)$(LTPPFCCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo diff --git a/hl/fortran/test/tstds.F90 b/hl/fortran/test/tstds.F90 new file mode 100644 index 0000000..cbf6c38 --- /dev/null +++ b/hl/fortran/test/tstds.F90 @@ -0,0 +1,353 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! * Copyright by The HDF Group. * +! * Copyright by the Board of Trustees of the University of Illinois. * +! * All rights reserved. * +! * * +! * This file is part of HDF5. The full HDF5 copyright notice, including * +! * terms governing use, modification, and redistribution, is contained in * +! * the files COPYING and Copyright.html. COPYING can be found at the root * +! * of the source code distribution tree; Copyright.html can be found at the * +! * root level of an installed copy of the electronic HDF5 document set and * +! * is linked from the top-level documents page. It can also be found at * +! * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! * access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +PROGRAM test_ds + + IMPLICIT NONE + + INTEGER :: err + + CALL test_testds(err) + + IF(err.LT.0)THEN + WRITE(*,'(5X,A)') "DIMENSION SCALES TEST *FAILED*" + ENDIF + +END PROGRAM test_ds + +SUBROUTINE test_testds(err) + + USE HDF5 + USE H5LT + USE H5DS + + IMPLICIT NONE + + INTEGER, PARAMETER :: RANK = 2 ! rank of DATA dataset + INTEGER, PARAMETER :: DIM_DATA = 12 + INTEGER, PARAMETER :: DIM1_SIZE = 3 + INTEGER, PARAMETER :: DIM2_SIZE = 4 + INTEGER, PARAMETER :: DIM1 = 1 + INTEGER, PARAMETER :: DIM2 = 2 + INTEGER, PARAMETER :: FAILED = -1 + + CHARACTER(LEN=6), PARAMETER :: DSET_NAME = "Mydata" + CHARACTER(LEN=5), PARAMETER :: DS_1_NAME = "Yaxis" + CHARACTER(LEN=5), PARAMETER :: DS_1_NAME_A = "Yaxiz" + CHARACTER(LEN=5), PARAMETER :: DS_2_NAME = "Xaxis" + + + INTEGER(hid_t) :: fid ! file ID + INTEGER(hid_t) :: did ! dataset ID + INTEGER(hid_t) :: dsid ! DS dataset ID + INTEGER :: rankds = 1 ! rank of DS dataset + INTEGER(hsize_t), DIMENSION(1:rank) :: dims = (/DIM2_SIZE,DIM1_SIZE/) ! size of DATA dataset + INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/) ! DATA of DATA dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s1_dim = (/DIM1_SIZE/) ! size of DS 1 dataset + INTEGER(hsize_t), DIMENSION(1:1) :: s2_dim = (/DIM2_SIZE/) ! size of DS 2 dataset + REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/) ! DATA of DS 1 dataset + INTEGER, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! DATA of DS 2 dataset + INTEGER :: err + INTEGER :: num_scales + INTEGER(size_t) :: name_len + CHARACTER(LEN=80) :: name + INTEGER(size_t) :: label_len + CHARACTER(LEN=80) :: label + LOGICAL :: is_attached, is_scale + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(err) + IF(err.LT.0) RETURN + + ! create a file using default properties + CALL H5Fcreate_f("tstds.h5",H5F_ACC_TRUNC_F, fid, err) + IF(err.LT.0) RETURN + + ! make a dataset + CALL H5LTmake_dataset_int_f(fid,DSET_NAME,rank,dims,buf, err) + IF(err.LT.0) RETURN + + ! make a DS dataset for the first dimension + CALL H5LTmake_dataset_float_f(fid,DS_1_NAME,rankds,s1_dim,s1_wbuf,err) + IF(err.LT.0) RETURN + + ! make a DS dataset for the second dimension + CALL H5LTmake_dataset_int_f(fid,DS_2_NAME,rankds,s2_dim,s2_wbuf,err) + IF(err.LT.0) RETURN + + !------------------------------------------------------------------------- + ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension 1 + !------------------------------------------------------------------------- + + CALL test_begin(' Test Attaching Dimension Scale ') + + ! get the dataset id for DSET_NAME + CALL H5Dopen_f(fid, DSET_NAME, did, err) + IF(err.LT.0) RETURN + + ! get the DS dataset id + CALL H5Dopen_f(fid, DS_1_NAME, dsid, err) + IF(err.LT.0) RETURN + + ! check attaching to a non-existent dimension; should fail + CALL H5DSattach_scale_f(did, dsid, 20, err) + IF(err.NE.-1) THEN + err = FAILED ! should fail, mark as an error + CALL write_test_status(err) + RETURN + ENDIF + + ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension index 1 + CALL H5DSattach_scale_f(did, dsid, DIM1, err) + IF(err.EQ.-1) THEN + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test If Dimension Scale Attached ') + + CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) + IF(err.EQ.-1.OR..NOT.is_attached) THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! Check to see how many Dimension Scales are attached + + CALL test_begin(' Test Getting Number Dimension Scales ') + + CALL H5DSget_num_scales_f(did, DIM1, num_scales, err) + IF(err.LT.0.OR.num_scales.NE.1)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test Detaching Dimension Scale ') + + ! Detach scale + CALL H5DSdetach_scale_f(did, dsid, DIM1, err) + IF(err.LT.0) RETURN + + ! Check to see if a dimension scale is attached, should be .false. + CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) + IF(err.LT.0.OR.is_attached)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + !------------------------------------------------------------------------- + ! set the DS_1_NAME dimension scale to DSET_NAME at dimension 0 + !------------------------------------------------------------------------- + + CALL test_begin(' Test Setting Dimension Scale ') + + CALL H5DSset_scale_f(dsid, err, "Dimension Scale Set 1") + IF(err.LT.0.OR.is_attached)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + CALL test_begin(' Test If Dimension Scale ') + + CALL H5DSis_scale_f(dsid, is_scale, err) + IF(err.LT.0.OR..NOT.is_scale)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! Get scale name; test to large character buffer + + CALL test_begin(' Test Getting Dimension Scale By Name ') + + name_len = 25 + name = '' + CALL H5DSget_scale_name_f(dsid, name, name_len, err) + IF(err.LT.0 .OR. & + name_len.NE.21 .OR. & + TRIM(name).NE."Dimension Scale Set 1" .OR. & + name(22:25).NE.' ')THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name; test exact size character buffer + name_len = 21 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimension Scale Set 1")THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name; test to small character buffer + name_len = 5 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimen")THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! close DS id + CALL H5Dclose_f(dsid, err) + IF(err.LT.0) RETURN + + !------------------------------------------------------------------------- + ! attach the DS_2_NAME dimension scale to DSET_NAME + !------------------------------------------------------------------------- + + ! get the DS dataset id + CALL H5Dopen_f(fid, DS_2_NAME, dsid, err) + IF(err.LT.0) RETURN + + ! attach the DS_2_NAME dimension scale to DSET_NAME as the 2nd dimension (index 2) + CALL H5DSattach_scale_f(did, dsid, DIM2, err) + IF(err.LT.0) RETURN + + CALL H5DSis_attached_f(did, dsid, DIM2, is_attached, err) + IF(err.LT.0) RETURN + + ! test sending no Dimension Scale name + + CALL H5DSset_scale_f(dsid, err) + IF(err.LT.0)THEN + CALL write_test_status(err) + RETURN + ENDIF + + CALL H5DSis_scale_f(dsid, is_scale, err) + IF(err.LT.0.OR..NOT.is_scale)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Get scale name when there is no scale name + name_len = 5 + name = '' + CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) + IF(err.LT.0.OR.name_len.NE.0)THEN ! name_len is 0 if no name is found + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + CALL write_test_status(err) + + CALL test_begin(' Test Setting Dimension Scale Label ') + + CALL H5DSset_label_f(did, DIM2, "Label12", err) + IF(err.LT.0)THEN + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is to small + + label_len = 5 + label = '' + CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) + IF(err.LT.0.OR.label(1:5).NE."Label".OR.label_len.NE.7)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is exact + + label_len = 7 + label = '' + CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) + IF(err.LT.0.OR.label(1:label_len).NE."Label12".OR.label_len.NE.7)THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + + ! Test label where character length is to big + + label_len = 25 + label = '' + CALL H5DSget_label_f(did, DIM2, label, label_len, err) + IF(err.LT.0.OR. & + label(1:label_len).NE."Label12" .OR. & + label_len.NE.7 .OR. & + label(8:25).NE.' ')THEN + err = FAILED + CALL write_test_status(err) + RETURN + ENDIF + CALL write_test_status(err) + + ! close DS id + CALL H5Dclose_f(dsid, err) + IF(err.LT.0) RETURN + + ! close file + CALL H5Fclose_f(fid, err) + IF(err.LT.0) RETURN + +END SUBROUTINE test_testds + +!------------------------------------------------------------------------- +! test_begin +!------------------------------------------------------------------------- + +SUBROUTINE test_begin(string) + CHARACTER(LEN=*), INTENT(IN) :: string + WRITE(*, fmt = '(A)', advance = 'no') ADJUSTL(string) +END SUBROUTINE test_begin + +!------------------------------------------------------------------------- +! passed/failed +!------------------------------------------------------------------------- +SUBROUTINE write_test_status( test_result) + +! Writes the results of the tests + + IMPLICIT NONE + + INTEGER, INTENT(IN) :: test_result ! negative, failed + ! 0 , passed + +! Controls the output style for reporting test results + + CHARACTER(LEN=8) :: error_string + CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' + CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' + + error_string = failure + IF (test_result .EQ. 0) THEN + error_string = success + ENDIF + + WRITE(*, fmt = '(T34, A)') error_string + +END SUBROUTINE write_test_status diff --git a/hl/fortran/test/tstds.f90 b/hl/fortran/test/tstds.f90 deleted file mode 100644 index cbf6c38..0000000 --- a/hl/fortran/test/tstds.f90 +++ /dev/null @@ -1,353 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! * Copyright by The HDF Group. * -! * Copyright by the Board of Trustees of the University of Illinois. * -! * All rights reserved. * -! * * -! * This file is part of HDF5. The full HDF5 copyright notice, including * -! * terms governing use, modification, and redistribution, is contained in * -! * the files COPYING and Copyright.html. COPYING can be found at the root * -! * of the source code distribution tree; Copyright.html can be found at the * -! * root level of an installed copy of the electronic HDF5 document set and * -! * is linked from the top-level documents page. It can also be found at * -! * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! * access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -PROGRAM test_ds - - IMPLICIT NONE - - INTEGER :: err - - CALL test_testds(err) - - IF(err.LT.0)THEN - WRITE(*,'(5X,A)') "DIMENSION SCALES TEST *FAILED*" - ENDIF - -END PROGRAM test_ds - -SUBROUTINE test_testds(err) - - USE HDF5 - USE H5LT - USE H5DS - - IMPLICIT NONE - - INTEGER, PARAMETER :: RANK = 2 ! rank of DATA dataset - INTEGER, PARAMETER :: DIM_DATA = 12 - INTEGER, PARAMETER :: DIM1_SIZE = 3 - INTEGER, PARAMETER :: DIM2_SIZE = 4 - INTEGER, PARAMETER :: DIM1 = 1 - INTEGER, PARAMETER :: DIM2 = 2 - INTEGER, PARAMETER :: FAILED = -1 - - CHARACTER(LEN=6), PARAMETER :: DSET_NAME = "Mydata" - CHARACTER(LEN=5), PARAMETER :: DS_1_NAME = "Yaxis" - CHARACTER(LEN=5), PARAMETER :: DS_1_NAME_A = "Yaxiz" - CHARACTER(LEN=5), PARAMETER :: DS_2_NAME = "Xaxis" - - - INTEGER(hid_t) :: fid ! file ID - INTEGER(hid_t) :: did ! dataset ID - INTEGER(hid_t) :: dsid ! DS dataset ID - INTEGER :: rankds = 1 ! rank of DS dataset - INTEGER(hsize_t), DIMENSION(1:rank) :: dims = (/DIM2_SIZE,DIM1_SIZE/) ! size of DATA dataset - INTEGER, DIMENSION(1:DIM_DATA) :: buf = (/1,2,3,4,5,6,7,8,9,10,11,12/) ! DATA of DATA dataset - INTEGER(hsize_t), DIMENSION(1:1) :: s1_dim = (/DIM1_SIZE/) ! size of DS 1 dataset - INTEGER(hsize_t), DIMENSION(1:1) :: s2_dim = (/DIM2_SIZE/) ! size of DS 2 dataset - REAL, DIMENSION(1:DIM1_SIZE) :: s1_wbuf = (/10,20,30/) ! DATA of DS 1 dataset - INTEGER, DIMENSION(1:DIM2_SIZE) :: s2_wbuf = (/10,20,50,100/) ! DATA of DS 2 dataset - INTEGER :: err - INTEGER :: num_scales - INTEGER(size_t) :: name_len - CHARACTER(LEN=80) :: name - INTEGER(size_t) :: label_len - CHARACTER(LEN=80) :: label - LOGICAL :: is_attached, is_scale - - ! - ! Initialize FORTRAN predefined datatypes. - ! - CALL h5open_f(err) - IF(err.LT.0) RETURN - - ! create a file using default properties - CALL H5Fcreate_f("tstds.h5",H5F_ACC_TRUNC_F, fid, err) - IF(err.LT.0) RETURN - - ! make a dataset - CALL H5LTmake_dataset_int_f(fid,DSET_NAME,rank,dims,buf, err) - IF(err.LT.0) RETURN - - ! make a DS dataset for the first dimension - CALL H5LTmake_dataset_float_f(fid,DS_1_NAME,rankds,s1_dim,s1_wbuf,err) - IF(err.LT.0) RETURN - - ! make a DS dataset for the second dimension - CALL H5LTmake_dataset_int_f(fid,DS_2_NAME,rankds,s2_dim,s2_wbuf,err) - IF(err.LT.0) RETURN - - !------------------------------------------------------------------------- - ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension 1 - !------------------------------------------------------------------------- - - CALL test_begin(' Test Attaching Dimension Scale ') - - ! get the dataset id for DSET_NAME - CALL H5Dopen_f(fid, DSET_NAME, did, err) - IF(err.LT.0) RETURN - - ! get the DS dataset id - CALL H5Dopen_f(fid, DS_1_NAME, dsid, err) - IF(err.LT.0) RETURN - - ! check attaching to a non-existent dimension; should fail - CALL H5DSattach_scale_f(did, dsid, 20, err) - IF(err.NE.-1) THEN - err = FAILED ! should fail, mark as an error - CALL write_test_status(err) - RETURN - ENDIF - - ! attach the DS_1_NAME dimension scale to DSET_NAME at dimension index 1 - CALL H5DSattach_scale_f(did, dsid, DIM1, err) - IF(err.EQ.-1) THEN - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - CALL test_begin(' Test If Dimension Scale Attached ') - - CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) - IF(err.EQ.-1.OR..NOT.is_attached) THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - ! Check to see how many Dimension Scales are attached - - CALL test_begin(' Test Getting Number Dimension Scales ') - - CALL H5DSget_num_scales_f(did, DIM1, num_scales, err) - IF(err.LT.0.OR.num_scales.NE.1)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - CALL test_begin(' Test Detaching Dimension Scale ') - - ! Detach scale - CALL H5DSdetach_scale_f(did, dsid, DIM1, err) - IF(err.LT.0) RETURN - - ! Check to see if a dimension scale is attached, should be .false. - CALL H5DSis_attached_f(did, dsid, DIM1, is_attached, err) - IF(err.LT.0.OR.is_attached)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - !------------------------------------------------------------------------- - ! set the DS_1_NAME dimension scale to DSET_NAME at dimension 0 - !------------------------------------------------------------------------- - - CALL test_begin(' Test Setting Dimension Scale ') - - CALL H5DSset_scale_f(dsid, err, "Dimension Scale Set 1") - IF(err.LT.0.OR.is_attached)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - CALL test_begin(' Test If Dimension Scale ') - - CALL H5DSis_scale_f(dsid, is_scale, err) - IF(err.LT.0.OR..NOT.is_scale)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - ! Get scale name; test to large character buffer - - CALL test_begin(' Test Getting Dimension Scale By Name ') - - name_len = 25 - name = '' - CALL H5DSget_scale_name_f(dsid, name, name_len, err) - IF(err.LT.0 .OR. & - name_len.NE.21 .OR. & - TRIM(name).NE."Dimension Scale Set 1" .OR. & - name(22:25).NE.' ')THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! Get scale name; test exact size character buffer - name_len = 21 - name = '' - CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) - IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimension Scale Set 1")THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! Get scale name; test to small character buffer - name_len = 5 - name = '' - CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) - IF(err.LT.0.OR.name_len.NE.21.OR.TRIM(name).NE."Dimen")THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! close DS id - CALL H5Dclose_f(dsid, err) - IF(err.LT.0) RETURN - - !------------------------------------------------------------------------- - ! attach the DS_2_NAME dimension scale to DSET_NAME - !------------------------------------------------------------------------- - - ! get the DS dataset id - CALL H5Dopen_f(fid, DS_2_NAME, dsid, err) - IF(err.LT.0) RETURN - - ! attach the DS_2_NAME dimension scale to DSET_NAME as the 2nd dimension (index 2) - CALL H5DSattach_scale_f(did, dsid, DIM2, err) - IF(err.LT.0) RETURN - - CALL H5DSis_attached_f(did, dsid, DIM2, is_attached, err) - IF(err.LT.0) RETURN - - ! test sending no Dimension Scale name - - CALL H5DSset_scale_f(dsid, err) - IF(err.LT.0)THEN - CALL write_test_status(err) - RETURN - ENDIF - - CALL H5DSis_scale_f(dsid, is_scale, err) - IF(err.LT.0.OR..NOT.is_scale)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! Get scale name when there is no scale name - name_len = 5 - name = '' - CALL H5DSget_scale_name_f(dsid, name(1:name_len), name_len, err) - IF(err.LT.0.OR.name_len.NE.0)THEN ! name_len is 0 if no name is found - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - CALL write_test_status(err) - - CALL test_begin(' Test Setting Dimension Scale Label ') - - CALL H5DSset_label_f(did, DIM2, "Label12", err) - IF(err.LT.0)THEN - CALL write_test_status(err) - RETURN - ENDIF - - ! Test label where character length is to small - - label_len = 5 - label = '' - CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) - IF(err.LT.0.OR.label(1:5).NE."Label".OR.label_len.NE.7)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! Test label where character length is exact - - label_len = 7 - label = '' - CALL H5DSget_label_f(did, DIM2, label(1:label_len), label_len, err) - IF(err.LT.0.OR.label(1:label_len).NE."Label12".OR.label_len.NE.7)THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - - ! Test label where character length is to big - - label_len = 25 - label = '' - CALL H5DSget_label_f(did, DIM2, label, label_len, err) - IF(err.LT.0.OR. & - label(1:label_len).NE."Label12" .OR. & - label_len.NE.7 .OR. & - label(8:25).NE.' ')THEN - err = FAILED - CALL write_test_status(err) - RETURN - ENDIF - CALL write_test_status(err) - - ! close DS id - CALL H5Dclose_f(dsid, err) - IF(err.LT.0) RETURN - - ! close file - CALL H5Fclose_f(fid, err) - IF(err.LT.0) RETURN - -END SUBROUTINE test_testds - -!------------------------------------------------------------------------- -! test_begin -!------------------------------------------------------------------------- - -SUBROUTINE test_begin(string) - CHARACTER(LEN=*), INTENT(IN) :: string - WRITE(*, fmt = '(A)', advance = 'no') ADJUSTL(string) -END SUBROUTINE test_begin - -!------------------------------------------------------------------------- -! passed/failed -!------------------------------------------------------------------------- -SUBROUTINE write_test_status( test_result) - -! Writes the results of the tests - - IMPLICIT NONE - - INTEGER, INTENT(IN) :: test_result ! negative, failed - ! 0 , passed - -! Controls the output style for reporting test results - - CHARACTER(LEN=8) :: error_string - CHARACTER(LEN=8), PARAMETER :: success = ' PASSED ' - CHARACTER(LEN=8), PARAMETER :: failure = '*FAILED*' - - error_string = failure - IF (test_result .EQ. 0) THEN - error_string = success - ENDIF - - WRITE(*, fmt = '(T34, A)') error_string - -END SUBROUTINE write_test_status diff --git a/hl/fortran/test/tstimage.F90 b/hl/fortran/test/tstimage.F90 new file mode 100644 index 0000000..0bff6b2 --- /dev/null +++ b/hl/fortran/test/tstimage.F90 @@ -0,0 +1,339 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains the FORTRAN90 tests for H5LT +! + +program image_test + +call make_image1() + +end program image_test + + +!------------------------------------------------------------------------- +! make_image1 +!------------------------------------------------------------------------- + +subroutine make_image1() + +use h5im ! module of H5IM +use hdf5 ! module of HDF5 library + +implicit none + +character(len=8), parameter :: filename = "f1img.h5" ! file name +character(len=4), parameter :: dsetname1 = "img1" ! dataset name +character(len=4), parameter :: dsetname2 = "img2" ! dataset name +character(len=15), parameter :: il ="INTERLACE_PIXEL"! dataset name +integer(hid_t) :: file_id ! file identifier +integer(hsize_t), parameter :: width = 500 ! width of image +integer(hsize_t), parameter :: height = 200 ! height of image +integer, parameter :: pal_entries = 9 ! palette number of entries +integer, dimension(width*height) :: buf1 ! data buffer +integer, dimension(width*height) :: bufr1 ! data buffer +integer, dimension(width*height*3) :: buf2 ! data buffer +integer, dimension(width*height*3) :: bufr2 ! data buffer +integer(hsize_t) :: widthr ! width of image +integer(hsize_t) :: heightr ! height of image +integer(hsize_t) :: planesr ! color planes +integer(hsize_t) :: npalsr ! palettes +character(len=15) :: interlacer ! interlace +integer :: errcode ! error flag +integer :: is_image ! error flag +integer :: i, j, n ! general purpose integers +! +! palette +! create a 9 entry palette +! +character(len=4), parameter :: pal_name = "pal1" ! dataset name +integer(hsize_t), dimension(2) :: pal_dims = (/pal_entries,3/) ! palette dimensions +integer(hsize_t), dimension(2) :: pal_dims_out ! palette dimensions +integer, dimension(pal_entries*3) :: pal_data_out ! data buffer +integer(hsize_t) :: npals ! number of palettes +integer :: pal_number ! palette number +integer :: is_palette ! is palette +integer :: space +integer, dimension(pal_entries*3) :: pal_data_in = (/& + 0,0,168,& ! dark blue + 0,0,252,& ! blue + 0,168,252,& ! ocean blue + 84,252,252,& ! light blue + 168,252,168,& ! light green + 0,252,168,& ! green + 252,252,84,& ! yellow + 252,168,0,& ! orange + 252,0,0/) ! red + + +! create an 8bit image of 9 values divided evenly by the array +! +space = width*height / pal_entries; +n = 0; j = 0; +do i = 1, width*height + buf1(i) = n + if ( j > space ) then + n = n + 1; + j = 0; + endif + if (n>pal_entries-1) n=0; + j = j +1; +end do + +! +! create a 3 byte rgb image +! +n = 0; j = 0; +do i = 1, width*height*3 + buf2(i) = n; + if (j == 3) then + n = n + 1; + j = 0; + endif + if (n>255) n=0; + j = j +1; +end do + + +! Initialize FORTRAN predefined datatypes. +! +call h5open_f(errcode) +! +! Create a new file using default properties. +! +call h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + +!------------------------------------------------------------------------- +! indexed image +!------------------------------------------------------------------------- + +call test_begin(' Make/Read image 8bit ') + +! +! write image. +! +call h5immake_image_8bit_f(file_id,dsetname1,width,height,buf1,errcode) +! +! read image. +! +call h5imread_image_f(file_id,dsetname1,bufr1,errcode) +! +! compare read and write buffers. +! +do i = 1, width*height + if ( buf1(i) /= bufr1(i) ) then + print *, 'read buffer differs from write buffer' + print *, bufr1(i), ' and ', buf1(i) + stop + endif +end do + +! +! get image info. +! +call h5imget_image_info_f(file_id,dsetname1,widthr,heightr,planesr,interlacer,npalsr,errcode) + +if ( (widthr /= widthr) .or. (heightr /= height) .or. (planesr /= 1)) then + print *, 'h5imget_image_info_f bad value' + stop +endif + +is_image = h5imis_image_f(file_id,dsetname1) +if ( is_image /= 1) then + print *, 'h5imis_image_f bad value' + stop +endif + + +call passed() + +!------------------------------------------------------------------------- +! true color image +!------------------------------------------------------------------------- + +call test_begin(' Make/Read image 24bit ') + +! +! write image. +! +call h5immake_image_24bit_f(file_id,dsetname2,width,height,il,buf2,errcode) + +! +! read image. +! +call h5imread_image_f(file_id,dsetname2,bufr2,errcode) + +! +! compare read and write buffers. +! +do i = 1, width*height*3 + if ( buf2(i) /= bufr2(i) ) then + print *, 'read buffer differs from write buffer' + print *, bufr2(i), ' and ', buf2(i) + stop + endif +end do + +! +! get image info. +! +call h5imget_image_info_f(file_id,dsetname2,widthr,heightr,planesr,interlacer,npalsr,errcode) + +if ( (widthr /= widthr) .or. (heightr /= height) .or. (planesr /= 3)) then + print *, 'h5imget_image_info_f bad value' + stop +endif + +is_image = h5imis_image_f(file_id,dsetname2) +if ( is_image /= 1) then + print *, 'h5imis_image_f bad value' + stop +endif + + + +call passed() + +!------------------------------------------------------------------------- +! palette +!------------------------------------------------------------------------- + +call test_begin(' Make palette ') + +! +! make palette. +! +call h5immake_palette_f(file_id,pal_name,pal_dims,pal_data_in,errcode) + +call passed() + + +call test_begin(' Link/Unlink palette ') + +! +! link palette. +! +call h5imlink_palette_f(file_id,dsetname1,pal_name,errcode) + + +! +! read palette. +! +pal_number = 0 +call h5imget_palette_f(file_id,dsetname1,pal_number,pal_data_out,errcode) + +! +! compare read and write buffers. +! +do i = 1, pal_entries*3 + if ( pal_data_in(i) /= pal_data_out(i) ) then + print *, 'read buffer differs from write buffer' + print *, pal_data_in(i), ' and ', pal_data_out(i) + stop + endif +end do + +! +! get number of palettes +! +call h5imget_npalettes_f(file_id,dsetname1,npals,errcode) + +if ( npals /= 1) then + print *, 'h5imget_npalettes_f bad value' + stop +endif + +! +! get palette info +! +pal_number = 0 +call h5imget_palette_info_f(file_id,dsetname1,pal_number,pal_dims_out,errcode) + +if ( (pal_dims_out(1) /= pal_dims(1)) .or. (pal_dims_out(2) /= pal_dims(2))) then + print *, 'h5imget_palette_info_f bad value' + stop +endif + +! +! is palette +! +is_palette = h5imis_palette_f(file_id,pal_name) + +if ( is_palette /= 1 ) then + print *, 'h5imis_palette_f bad value' + stop +endif + +! +! unlink palette. +! +call h5imunlink_palette_f(file_id,dsetname1,pal_name,errcode) + +! +! get number of palettes +! +call h5imget_npalettes_f(file_id,dsetname1,npals,errcode ) + +if ( npals /= 0) then + print *, 'h5imget_npalettes_f bad value' + stop +endif + + +! +! link palette again +! +call h5imlink_palette_f(file_id,dsetname1,pal_name,errcode) + +call passed() + + +!------------------------------------------------------------------------- +! end +!------------------------------------------------------------------------- + +! +! Close the file. +! +call h5fclose_f(file_id, errcode) + +! +! Close FORTRAN predefined datatypes. +! +call h5close_f(errcode) + +! +! end function. +! +end subroutine make_image1 + +!------------------------------------------------------------------------- +! test_begin +!------------------------------------------------------------------------- + +subroutine test_begin(string) +character(len=*), intent(in) :: string +write(*, fmt = '(14a)', advance = 'no') string +write(*, fmt = '(40x,a)', advance = 'no') ' ' +end subroutine test_begin + +!------------------------------------------------------------------------- +! passed +!------------------------------------------------------------------------- + +subroutine passed() +write(*, fmt = '(6a)') 'PASSED' +end subroutine passed diff --git a/hl/fortran/test/tstimage.f90 b/hl/fortran/test/tstimage.f90 deleted file mode 100644 index 0bff6b2..0000000 --- a/hl/fortran/test/tstimage.f90 +++ /dev/null @@ -1,339 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains the FORTRAN90 tests for H5LT -! - -program image_test - -call make_image1() - -end program image_test - - -!------------------------------------------------------------------------- -! make_image1 -!------------------------------------------------------------------------- - -subroutine make_image1() - -use h5im ! module of H5IM -use hdf5 ! module of HDF5 library - -implicit none - -character(len=8), parameter :: filename = "f1img.h5" ! file name -character(len=4), parameter :: dsetname1 = "img1" ! dataset name -character(len=4), parameter :: dsetname2 = "img2" ! dataset name -character(len=15), parameter :: il ="INTERLACE_PIXEL"! dataset name -integer(hid_t) :: file_id ! file identifier -integer(hsize_t), parameter :: width = 500 ! width of image -integer(hsize_t), parameter :: height = 200 ! height of image -integer, parameter :: pal_entries = 9 ! palette number of entries -integer, dimension(width*height) :: buf1 ! data buffer -integer, dimension(width*height) :: bufr1 ! data buffer -integer, dimension(width*height*3) :: buf2 ! data buffer -integer, dimension(width*height*3) :: bufr2 ! data buffer -integer(hsize_t) :: widthr ! width of image -integer(hsize_t) :: heightr ! height of image -integer(hsize_t) :: planesr ! color planes -integer(hsize_t) :: npalsr ! palettes -character(len=15) :: interlacer ! interlace -integer :: errcode ! error flag -integer :: is_image ! error flag -integer :: i, j, n ! general purpose integers -! -! palette -! create a 9 entry palette -! -character(len=4), parameter :: pal_name = "pal1" ! dataset name -integer(hsize_t), dimension(2) :: pal_dims = (/pal_entries,3/) ! palette dimensions -integer(hsize_t), dimension(2) :: pal_dims_out ! palette dimensions -integer, dimension(pal_entries*3) :: pal_data_out ! data buffer -integer(hsize_t) :: npals ! number of palettes -integer :: pal_number ! palette number -integer :: is_palette ! is palette -integer :: space -integer, dimension(pal_entries*3) :: pal_data_in = (/& - 0,0,168,& ! dark blue - 0,0,252,& ! blue - 0,168,252,& ! ocean blue - 84,252,252,& ! light blue - 168,252,168,& ! light green - 0,252,168,& ! green - 252,252,84,& ! yellow - 252,168,0,& ! orange - 252,0,0/) ! red - - -! create an 8bit image of 9 values divided evenly by the array -! -space = width*height / pal_entries; -n = 0; j = 0; -do i = 1, width*height - buf1(i) = n - if ( j > space ) then - n = n + 1; - j = 0; - endif - if (n>pal_entries-1) n=0; - j = j +1; -end do - -! -! create a 3 byte rgb image -! -n = 0; j = 0; -do i = 1, width*height*3 - buf2(i) = n; - if (j == 3) then - n = n + 1; - j = 0; - endif - if (n>255) n=0; - j = j +1; -end do - - -! Initialize FORTRAN predefined datatypes. -! -call h5open_f(errcode) -! -! Create a new file using default properties. -! -call h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - -!------------------------------------------------------------------------- -! indexed image -!------------------------------------------------------------------------- - -call test_begin(' Make/Read image 8bit ') - -! -! write image. -! -call h5immake_image_8bit_f(file_id,dsetname1,width,height,buf1,errcode) -! -! read image. -! -call h5imread_image_f(file_id,dsetname1,bufr1,errcode) -! -! compare read and write buffers. -! -do i = 1, width*height - if ( buf1(i) /= bufr1(i) ) then - print *, 'read buffer differs from write buffer' - print *, bufr1(i), ' and ', buf1(i) - stop - endif -end do - -! -! get image info. -! -call h5imget_image_info_f(file_id,dsetname1,widthr,heightr,planesr,interlacer,npalsr,errcode) - -if ( (widthr /= widthr) .or. (heightr /= height) .or. (planesr /= 1)) then - print *, 'h5imget_image_info_f bad value' - stop -endif - -is_image = h5imis_image_f(file_id,dsetname1) -if ( is_image /= 1) then - print *, 'h5imis_image_f bad value' - stop -endif - - -call passed() - -!------------------------------------------------------------------------- -! true color image -!------------------------------------------------------------------------- - -call test_begin(' Make/Read image 24bit ') - -! -! write image. -! -call h5immake_image_24bit_f(file_id,dsetname2,width,height,il,buf2,errcode) - -! -! read image. -! -call h5imread_image_f(file_id,dsetname2,bufr2,errcode) - -! -! compare read and write buffers. -! -do i = 1, width*height*3 - if ( buf2(i) /= bufr2(i) ) then - print *, 'read buffer differs from write buffer' - print *, bufr2(i), ' and ', buf2(i) - stop - endif -end do - -! -! get image info. -! -call h5imget_image_info_f(file_id,dsetname2,widthr,heightr,planesr,interlacer,npalsr,errcode) - -if ( (widthr /= widthr) .or. (heightr /= height) .or. (planesr /= 3)) then - print *, 'h5imget_image_info_f bad value' - stop -endif - -is_image = h5imis_image_f(file_id,dsetname2) -if ( is_image /= 1) then - print *, 'h5imis_image_f bad value' - stop -endif - - - -call passed() - -!------------------------------------------------------------------------- -! palette -!------------------------------------------------------------------------- - -call test_begin(' Make palette ') - -! -! make palette. -! -call h5immake_palette_f(file_id,pal_name,pal_dims,pal_data_in,errcode) - -call passed() - - -call test_begin(' Link/Unlink palette ') - -! -! link palette. -! -call h5imlink_palette_f(file_id,dsetname1,pal_name,errcode) - - -! -! read palette. -! -pal_number = 0 -call h5imget_palette_f(file_id,dsetname1,pal_number,pal_data_out,errcode) - -! -! compare read and write buffers. -! -do i = 1, pal_entries*3 - if ( pal_data_in(i) /= pal_data_out(i) ) then - print *, 'read buffer differs from write buffer' - print *, pal_data_in(i), ' and ', pal_data_out(i) - stop - endif -end do - -! -! get number of palettes -! -call h5imget_npalettes_f(file_id,dsetname1,npals,errcode) - -if ( npals /= 1) then - print *, 'h5imget_npalettes_f bad value' - stop -endif - -! -! get palette info -! -pal_number = 0 -call h5imget_palette_info_f(file_id,dsetname1,pal_number,pal_dims_out,errcode) - -if ( (pal_dims_out(1) /= pal_dims(1)) .or. (pal_dims_out(2) /= pal_dims(2))) then - print *, 'h5imget_palette_info_f bad value' - stop -endif - -! -! is palette -! -is_palette = h5imis_palette_f(file_id,pal_name) - -if ( is_palette /= 1 ) then - print *, 'h5imis_palette_f bad value' - stop -endif - -! -! unlink palette. -! -call h5imunlink_palette_f(file_id,dsetname1,pal_name,errcode) - -! -! get number of palettes -! -call h5imget_npalettes_f(file_id,dsetname1,npals,errcode ) - -if ( npals /= 0) then - print *, 'h5imget_npalettes_f bad value' - stop -endif - - -! -! link palette again -! -call h5imlink_palette_f(file_id,dsetname1,pal_name,errcode) - -call passed() - - -!------------------------------------------------------------------------- -! end -!------------------------------------------------------------------------- - -! -! Close the file. -! -call h5fclose_f(file_id, errcode) - -! -! Close FORTRAN predefined datatypes. -! -call h5close_f(errcode) - -! -! end function. -! -end subroutine make_image1 - -!------------------------------------------------------------------------- -! test_begin -!------------------------------------------------------------------------- - -subroutine test_begin(string) -character(len=*), intent(in) :: string -write(*, fmt = '(14a)', advance = 'no') string -write(*, fmt = '(40x,a)', advance = 'no') ' ' -end subroutine test_begin - -!------------------------------------------------------------------------- -! passed -!------------------------------------------------------------------------- - -subroutine passed() -write(*, fmt = '(6a)') 'PASSED' -end subroutine passed diff --git a/hl/fortran/test/tstlite.F90 b/hl/fortran/test/tstlite.F90 new file mode 100644 index 0000000..0eb005b --- /dev/null +++ b/hl/fortran/test/tstlite.F90 @@ -0,0 +1,1719 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains the FORTRAN90 tests for H5LT +! +#include + +PROGRAM lite_test + + CALL test_dataset1D() + CALL test_dataset2D() + CALL test_dataset3D() + CALL test_datasetND(4) + CALL test_datasetND(5) + CALL test_datasetND(6) + CALL test_datasetND(7) + CALL test_datasets() + CALL test_attributes() + +END PROGRAM lite_test + + +!------------------------------------------------------------------------- +! test_dataset1D +!------------------------------------------------------------------------- + +SUBROUTINE test_dataset1D() + +USE, INTRINSIC :: ISO_C_BINDING +USE H5LT ! module of H5LT +USE HDF5 ! module of HDF5 library + +IMPLICIT NONE + +INTEGER, PARAMETER :: DIM1 = 4; ! Dimension of array +CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name +CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name +INTEGER(HID_T) :: file_id ! File identifier +INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions +INTEGER :: rank = 1 ! Dataset rank +INTEGER, DIMENSION(DIM1) :: buf1 ! Data buffer +INTEGER, DIMENSION(DIM1) :: bufr1 ! Data buffer +REAL, DIMENSION(DIM1) :: buf2 ! Data buffer +REAL, DIMENSION(DIM1) :: bufr2 ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr3 ! Data buffer +INTEGER :: errcode ! Error flag +INTEGER :: i ! general purpose integer +TYPE(C_PTR) :: f_ptr +integer(HID_T) :: mytype + +CALL test_begin(' Make/Read datasets (1D) ') + +! +! Initialize the data array. +! +DO i = 1, DIM1 + buf1(i) = i; + buf2(i) = i; + buf3(i) = i; +END DO + +! +! Initialize FORTRAN predefined datatypes. +! +CALL h5open_f(errcode) + +! +! Create a new file using default properties. +! +CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + +!------------------------------------------------------------------------- +! H5T_NATIVE_INTEGER +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, DIM1 + IF ( buf1(i) .NE. bufr1(i) ) THEN + PRINT *, 'read buffer differs from write buffer (I)' + PRINT *, bufr1(i), ' and ', buf1(i) + STOP + ENDIF +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_REAL +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, DIM1 + IF ( buf2(i) .NE. bufr2(i) ) THEN + PRINT *, 'read buffer differs from write buffer (R)' + PRINT *, bufr2(i), ' and ', buf2(i) + STOP + ENDIF +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_DOUBLE +!------------------------------------------------------------------------- + +! +! write dataset. +! +f_ptr = C_LOC(buf3(1)) +mytype = h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) +CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, & + mytype, f_ptr, errcode) +!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode) +! h5kind_to_type(KIND(buf3(1)), H5_REAL_KIND) +! +! read dataset. +! +f_ptr = C_LOC(bufr3(1)) +CALL h5ltread_dataset_f(file_id, dsetname3, & + h5kind_to_type(KIND(bufr3(1)), H5_REAL_KIND), f_ptr, errcode) +!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, DIM1 + IF ( buf3(i) .NE. bufr3(i) ) THEN + PRINT *, 'read buffer differs from write buffer (D)' + PRINT *, bufr3(i), ' and ', buf3(i) + STOP + ENDIF +END DO + +! +! Close the file. +! +CALL h5fclose_f(file_id, errcode) + +! +! Close FORTRAN predefined datatypes. +! +CALL h5close_f(errcode) + +CALL passed() +! +! end function. +! +END SUBROUTINE test_dataset1D + +!------------------------------------------------------------------------- +! test_dataset2D +!------------------------------------------------------------------------- + +SUBROUTINE test_dataset2D() + +USE, INTRINSIC :: ISO_C_BINDING +USE H5LT ! module of H5LT +USE HDF5 ! module of HDF5 library + +IMPLICIT NONE + + +INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4; ! columns +INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6; ! rows +CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name +CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name +INTEGER(HID_T) :: file_id ! File identifier +INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions +INTEGER :: rank = 2 ! Dataset rank +INTEGER, DIMENSION(DIM1*DIM2) :: buf ! Data buffer +INTEGER, DIMENSION(DIM1*DIM2) :: bufr ! Data buffer +INTEGER, DIMENSION(DIM1,DIM2) :: buf2 ! Data buffer +INTEGER, DIMENSION(DIM1,DIM2) :: buf2r ! Data buffer +REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3 ! Data buffer +REAL, DIMENSION(DIM1,DIM2), TARGET :: buf3r ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4 ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1,DIM2), TARGET :: buf4r ! Data buffer +INTEGER :: errcode ! Error flag +INTEGER(HSIZE_T) :: i, j, n ! general purpose integers +TYPE(C_PTR) :: f_ptr + +CALL test_begin(' Make/Read datasets (2D) ') + + +! +! Initialize the data arrays. +! +n=1 +DO i = 1, DIM1*DIM2 + buf(i) = INT(n) + n = n + 1 +END DO + +DO i = 1, dims(1) + DO j = 1, dims(2) + buf2(i,j) = INT((i-1)*dims(2) + j) + buf3(i,j) = INT((i-1)*dims(2) + j) + buf4(i,j) = INT((i-1)*dims(2) + j) + END DO +END DO + + +! +! Initialize FORTRAN predefined datatypes. +! +CALL h5open_f(errcode) + +! +! Create a new file using default properties. +! +CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + +!------------------------------------------------------------------------- +! H5T_NATIVE_INT 1D buffer +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, DIM1*DIM2 + IF ( buf(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr(i), ' and ', buf(i) + STOP + ENDIF +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_INT 2D buffer +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf2r(i,j), ' and ', buf2(i,j) + STOP + ENDIF + END DO +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_REAL +!------------------------------------------------------------------------- + +! +! write dataset. +! +f_ptr = C_LOC(buf3(1,1)) +CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) +!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) + +! +! read dataset. +! +f_ptr = C_LOC(buf3r(1,1)) +CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) +!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf3r(i,j), ' and ', buf3(i,j) + STOP + ENDIF + END DO +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_DOUBLE +!------------------------------------------------------------------------- + +! +! write dataset. +! +f_ptr = C_LOC(buf4(1,1)) +CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) +!CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode) + +! +! read dataset. +f_ptr = C_LOC(buf4r(1,1)) +CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + +!CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf4r(i,j), ' and ', buf4(i,j) + STOP + ENDIF + END DO +END DO + +! +! Close the file. +! +CALL h5fclose_f(file_id, errcode) + +! +! Close FORTRAN predefined datatypes. +! +CALL h5close_f(errcode) + +CALL passed() +! +! end function. +! +END SUBROUTINE test_dataset2D + + +!------------------------------------------------------------------------- +! test_dataset3D +!------------------------------------------------------------------------- + + +SUBROUTINE test_dataset3D() +USE, INTRINSIC :: ISO_C_BINDING +USE H5LT ! module of H5LT +USE HDF5 ! module of HDF5 library + +IMPLICIT NONE + +INTEGER, PARAMETER :: DIM1 = 6 ! columns +INTEGER, PARAMETER :: DIM2 = 4 ! rows +INTEGER, PARAMETER :: DIM3 = 2 ! layers +CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name +CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name +CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name +INTEGER(HID_T) :: file_id ! File identifier +INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions +INTEGER(HSIZE_T), DIMENSION(3) :: dimsr ! Dataset dimensions +INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf ! Data buffer +INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr ! Data buffer +INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2 ! Data buffer +INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r ! Data buffer +REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3 ! Data buffer +REAL, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf3r ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4 ! Data buffer +DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3), TARGET :: buf4r ! Data buffer +INTEGER :: rank = 3 ! Dataset rank +INTEGER :: errcode ! Error flag +INTEGER(HSIZE_T) :: i, j, k, n ! general purpose integers +INTEGER :: type_class +INTEGER(SIZE_T) :: type_size +TYPE(C_PTR) :: f_ptr +CALL test_begin(' Make/Read datasets (3D) ') + + +! +! Initialize the data array. +! +n=1 +DO i = 1, DIM1*DIM2*DIM3 + buf(i) = INT(n) + n = n + 1 +END DO + +n = 1 +DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + buf2(i,j,k) = INT(n) + buf3(i,j,k) = INT(n) + buf4(i,j,k) = INT(n) + n = n + 1 + END DO + END DO +END DO + +! +! Initialize FORTRAN predefined datatypes. +! +CALL h5open_f(errcode) + +! +! Create a new file using default properties. +! +CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + +!------------------------------------------------------------------------- +! H5T_NATIVE_INT 1D buffer +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, DIM1*DIM2*DIM3 + IF ( buf(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr(i), ' and ', buf(i) + STOP + ENDIF +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_INT 3D buffer +!------------------------------------------------------------------------- + +! +! write dataset. +! +CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) + +! +! read dataset. +! +CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf2r(i,j,k), ' and ', buf2(i,j,k) + STOP + ENDIF + END DO + END DO +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_REAL +!------------------------------------------------------------------------- + +! +! write dataset. +! +f_ptr = C_LOC(buf3(1,1,1)) +CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) +!CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) + +! +! read dataset. +! +f_ptr = C_LOC(buf3r(1,1,1)) +CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) +!CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf3r(i,j,k), ' and ', buf3(i,j,k) + STOP + ENDIF + END DO + END DO +END DO + +!------------------------------------------------------------------------- +! H5T_NATIVE_DOUBLE +!------------------------------------------------------------------------- + +! +! write dataset. +! +f_ptr = C_LOC(buf4(1,1,1)) +CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) + +! +! read dataset. +! +f_ptr = C_LOC(buf4r(1,1,1)) +CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + +! +! compare read and write buffers. +! +DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf4r(i,j,k), ' and ', buf4(i,j,k) + STOP + ENDIF + END DO + END DO +END DO + +CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + +! +! compare dimensions +! +DO i = 1, rank + IF ( dimsr(i) .NE. dims(i) ) THEN + PRINT *, 'dimensions differ ' + STOP + ENDIF +END DO + +! +! Close the file. +! +CALL h5fclose_f(file_id, errcode) + +! +! Close FORTRAN predefined datatypes. +! +CALL h5close_f(errcode) + +CALL passed() +! +! end function. +! +END SUBROUTINE test_dataset3D + +!------------------------------------------------------------------------- +! test_datasetND +!------------------------------------------------------------------------- + + +SUBROUTINE test_datasetND(rank) + + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + + IMPLICIT NONE + + INTEGER :: rank ! Dataset rank + + INTEGER, PARAMETER :: DIM1 = 2 ! columns + INTEGER, PARAMETER :: DIM2 = 4 ! rows + INTEGER, PARAMETER :: DIM3 = 2 ! layers + INTEGER, PARAMETER :: DIM4 = 5 ! columns + INTEGER, PARAMETER :: DIM5 = 4 ! rows + INTEGER, PARAMETER :: DIM6 = 3 ! layers + INTEGER, PARAMETER :: DIM7 = 2 ! layers + CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HSIZE_T), DIMENSION(7) :: dims + INTEGER(HSIZE_T), DIMENSION(7) :: dimsr ! Dataset dimensions + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:) :: ibuf_4 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:) :: ibufr_4 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: ibuf_5 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: ibufr_5 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: ibuf_6 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: ibufr_6 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: ibuf_7 ! Data buffer + INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: ibufr_7 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: rbuf_4 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: rbufr_4 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: rbuf_5 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: rbufr_5 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: rbuf_6 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: rbufr_6 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: rbuf_7 ! Data buffer + REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: rbufr_7 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: dbuf_4 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:), TARGET :: dbufr_4 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: dbuf_5 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:), TARGET :: dbufr_5 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: dbuf_6 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:), TARGET :: dbufr_6 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbuf_7 ! Data buffer + DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:), TARGET :: dbufr_7 ! Data buffer + INTEGER :: errcode ! Error flag + INTEGER(HSIZE_T) :: i, j, k, l, m, n, o, nn ! general purpose integers + INTEGER :: type_class + INTEGER(SIZE_T) :: type_size + CHARACTER(LEN=1) :: ichr1 + TYPE(C_PTR) :: f_ptr + + WRITE(ichr1,'(I1.1)') rank + CALL test_begin(' Make/Read datasets ('//ichr1//'D) ') +! +! Initialize the data array. +! + IF(rank.EQ.4)THEN + + ALLOCATE(ibuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(ibufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(rbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(rbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(dbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + ALLOCATE(dbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) + + dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,0,0,0/) + + nn = 1 + DO i = 1, DIM1 + DO j = 1, DIM2 + DO k = 1, DIM3 + DO l = 1, DIM4 + ibuf_4(i,j,k,l) = INT(nn) + rbuf_4(i,j,k,l) = INT(nn) + dbuf_4(i,j,k,l) = INT(nn) + nn = nn + 1 + END DO + END DO + END DO + ENDDO + + ELSE IF(rank.EQ.5)THEN + + ALLOCATE(ibuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(ibufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(rbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(rbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(dbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + ALLOCATE(dbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) + + dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,0,0/) + + nn = 1 + DO i = 1, DIM1 + DO j = 1, DIM2 + DO k = 1, DIM3 + DO l = 1, DIM4 + DO m = 1, DIM5 + ibuf_5(i,j,k,l,m) = INT(nn) + rbuf_5(i,j,k,l,m) = INT(nn) + dbuf_5(i,j,k,l,m) = INT(nn) + nn = nn + 1 + END DO + END DO + END DO + ENDDO + ENDDO + + ELSE IF(rank.EQ.6)THEN + + ALLOCATE(ibuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(ibufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(rbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(rbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(dbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + ALLOCATE(dbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) + + dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,0/) + + nn = 1 + DO i = 1, DIM1 + DO j = 1, DIM2 + DO k = 1, DIM3 + DO l = 1, DIM4 + DO m = 1, DIM5 + DO n = 1, DIM6 + ibuf_6(i,j,k,l,m,n) = INT(nn) + rbuf_6(i,j,k,l,m,n) = INT(nn) + dbuf_6(i,j,k,l,m,n) = INT(nn) + nn = nn + 1 + END DO + END DO + END DO + ENDDO + ENDDO + ENDDO + + ELSE IF(rank.EQ.7)THEN + + ALLOCATE(ibuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(ibufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(rbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(rbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(dbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + ALLOCATE(dbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) + + dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,DIM7/) + + nn = 1 + DO i = 1, DIM1 + DO j = 1, DIM2 + DO k = 1, DIM3 + DO l = 1, DIM4 + DO m = 1, DIM5 + DO n = 1, DIM6 + DO o = 1, DIM7 + ibuf_7(i,j,k,l,m,n,o) = INT(nn) + rbuf_7(i,j,k,l,m,n,o) = INT(nn) + dbuf_7(i,j,k,l,m,n,o) = INT(nn) + nn = nn + 1 + END DO + END DO + END DO + ENDDO + ENDDO + ENDDO + ENDDO + + ENDIF + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) + + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + + !------------------------------------------------------------------------- + ! H5T_NATIVE_INT ND buffer + !------------------------------------------------------------------------- + + ! + ! write dataset. + ! + IF(rank.EQ.4)THEN + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_4, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(ibuf_5(1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_6, errcode) + ELSE IF(rank.EQ.7)THEN + CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_7, errcode) + ENDIF + + + ! + ! read dataset. + ! + IF(rank.EQ.4)THEN + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_4, dims(1:rank), errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(ibufr_5(1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_6, dims(1:rank), errcode) + ELSE IF(rank.EQ.7)THEN + CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_7, dims(1:rank), errcode) + ENDIF + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + DO l = 1, dims(4) + IF(rank.EQ.4)THEN + IF ( ibuf_4(i,j,k,l) .NE. ibufr_4(i,j,k,l) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, ibuf_4(i,j,k,l), ' and ', ibufr_4(i,j,k,l) + STOP + ENDIF + ENDIF + DO m = 1, dims(5) + IF(rank.EQ.5)THEN + IF ( ibuf_5(i,j,k,l,m) .NE. ibufr_5(i,j,k,l,m) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, ibuf_5(i,j,k,l,m), ' and ', ibufr_5(i,j,k,l,m) + STOP + ENDIF + ENDIF + DO n = 1, dims(6) + IF(rank.EQ.6)THEN + IF ( ibuf_6(i,j,k,l,m,n) .NE. ibufr_6(i,j,k,l,m,n) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, ibuf_6(i,j,k,l,m,n), ' and ', ibufr_6(i,j,k,l,m,n) + STOP + ENDIF + ENDIF + DO o = 1, dims(7) + IF(rank.EQ.7)THEN + IF ( ibuf_7(i,j,k,l,m,n,o) .NE. ibufr_7(i,j,k,l,m,n,o) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, ibuf_7(i,j,k,l,m,n,o), ' and ', ibufr_7(i,j,k,l,m,n,o) + STOP + ENDIF + ENDIF + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + !------------------------------------------------------------------------- + ! H5T_NATIVE_REAL + !------------------------------------------------------------------------- + + ! + ! write dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(rbuf_4(1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) + ! CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(rbuf_5(1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(rbuf_6(1,1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_6, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(rbuf_7(1,1,1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, f_ptr, errcode) + !CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_7, errcode) + ENDIF + + + ! + ! read dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(rbufr_4(1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(rbufr_5(1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(rbufr_6(1,1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(rbufr_7(1,1,1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + ENDIF + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + DO l = 1, dims(4) + IF(rank.EQ.4)THEN + IF ( rbuf_4(i,j,k,l) .NE. rbufr_4(i,j,k,l) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, rbuf_4(i,j,k,l), ' and ', rbufr_4(i,j,k,l) + STOP + ENDIF + ENDIF + DO m = 1, dims(5) + IF(rank.EQ.5)THEN + IF ( rbuf_5(i,j,k,l,m) .NE. rbufr_5(i,j,k,l,m) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, rbuf_5(i,j,k,l,m), ' and ', rbufr_5(i,j,k,l,m) + STOP + ENDIF + ENDIF + DO n = 1, dims(6) + IF(rank.EQ.6)THEN + IF ( rbuf_6(i,j,k,l,m,n) .NE. rbufr_6(i,j,k,l,m,n) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, rbuf_6(i,j,k,l,m,n), ' and ', rbufr_6(i,j,k,l,m,n) + STOP + ENDIF + ENDIF + DO o = 1, dims(7) + IF(rank.EQ.7)THEN + IF ( rbuf_7(i,j,k,l,m,n,o) .NE. rbufr_7(i,j,k,l,m,n,o) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, rbuf_7(i,j,k,l,m,n,o), ' and ', rbufr_7(i,j,k,l,m,n,o) + STOP + ENDIF + ENDIF + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + + !------------------------------------------------------------------------- + ! H5T_NATIVE_DOUBLE + !------------------------------------------------------------------------- + + ! + ! write dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(dbuf_4(1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(dbuf_5(1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(dbuf_6(1,1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(dbuf_7(1,1,1,1,1,1,1)) + CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, f_ptr, errcode) + ENDIF + + + ! + ! read dataset. + ! + IF(rank.EQ.4)THEN + f_ptr = C_LOC(dbufr_4(1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.5)THEN + f_ptr = C_LOC(dbufr_5(1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.6)THEN + f_ptr = C_LOC(dbufr_6(1,1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ELSE IF(rank.EQ.7)THEN + f_ptr = C_LOC(dbufr_7(1,1,1,1,1,1,1)) + CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + ENDIF + + ! + ! compare read and write buffers. + ! + DO i = 1, dims(1) + DO j = 1, dims(2) + DO k = 1, dims(3) + DO l = 1, dims(4) + IF(rank.EQ.4)THEN + IF ( dbuf_4(i,j,k,l) .NE. dbufr_4(i,j,k,l) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dbuf_4(i,j,k,l), ' and ', dbufr_4(i,j,k,l) + STOP + ENDIF + ENDIF + DO m = 1, dims(5) + IF(rank.EQ.5)THEN + IF ( dbuf_5(i,j,k,l,m) .NE. dbufr_5(i,j,k,l,m) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dbuf_5(i,j,k,l,m), ' and ', dbufr_5(i,j,k,l,m) + STOP + ENDIF + ENDIF + DO n = 1, dims(6) + IF(rank.EQ.6)THEN + IF ( dbuf_6(i,j,k,l,m,n) .NE. dbufr_6(i,j,k,l,m,n) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dbuf_6(i,j,k,l,m,n), ' and ', dbufr_6(i,j,k,l,m,n) + STOP + ENDIF + ENDIF + DO o = 1, dims(7) + IF(rank.EQ.7)THEN + IF ( dbuf_7(i,j,k,l,m,n,o) .NE. dbufr_7(i,j,k,l,m,n,o) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, dbuf_7(i,j,k,l,m,n,o), ' and ', dbufr_7(i,j,k,l,m,n,o) + STOP + ENDIF + ENDIF + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + ENDDO + + CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + + ! + ! compare dimensions + ! + DO i = 1, rank + IF ( dimsr(i) .NE. dims(i) ) THEN + PRINT *, 'dimensions differ ' + STOP + ENDIF + END DO + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + ! DEALLOCATE RESOURCES + + IF(rank.EQ.4)THEN + DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4) + ELSE IF(rank.EQ.5)THEN + DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5) + ELSE IF(rank.EQ.6)THEN + DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6) + ELSE IF(rank.EQ.7)THEN + DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7) + ENDIF + + CALL passed() + ! + ! end function. + ! +END SUBROUTINE test_datasetND + + + +!------------------------------------------------------------------------- +! test_datasets +!------------------------------------------------------------------------- + +SUBROUTINE test_datasets() + + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + + IMPLICIT NONE + + CHARACTER(len=9), PARAMETER :: filename = "dsetf4.h5"! File name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER :: errcode ! Error flag + INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name + CHARACTER(LEN=5), PARAMETER :: dsetname5 = "dset5" ! Dataset name + INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions + INTEGER(HSIZE_T), DIMENSION(1) :: dimsr ! Dataset dimensions + INTEGER :: rank = 1 ! Dataset rank + INTEGER :: rankr ! Dataset rank + CHARACTER(LEN=8), PARAMETER :: buf1 = "mystring" ! Data buffer + CHARACTER(LEN=8) :: buf1r ! Data buffer + INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer + INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer + REAL, DIMENSION(DIM1), TARGET :: buf3 ! Data buffer + REAL, DIMENSION(DIM1) , TARGET :: bufr3 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4 ! Data buffer + INTEGER :: i, n ! general purpose integer + INTEGER :: has ! general purpose integer + INTEGER :: type_class + INTEGER(SIZE_T) :: type_size + LOGICAL :: path_valid ! status of the path + CHARACTER(LEN=6) :: chr_exact + CHARACTER(LEN=8) :: chr_lg + TYPE(C_PTR) :: f_ptr + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) + + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + + ! + ! Initialize the data array. + ! + n = 1 + DO i = 1, DIM1 + buf2(i) = n + buf3(i) = n + buf4(i) = n + n = n + 1 + END DO + + !------------------------------------------------------------------------- + ! int + !------------------------------------------------------------------------- + + CALL test_begin(' Make/Read datasets (integer) ') + + ! + ! write dataset. + ! + CALL h5ltmake_dataset_int_f(file_id, dsetname2, rank, dims, buf2, errcode) + + ! + ! read dataset. + ! + CALL h5ltread_dataset_int_f(file_id, dsetname2, bufr2, dims, errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf2(i) .NE. bufr2(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr2(i), ' and ', buf2(i) + STOP + ENDIF + END DO + + CALL passed() + + + !------------------------------------------------------------------------- + ! real + !------------------------------------------------------------------------- + + CALL test_begin(' Make/Read datasets (float) ') + + + ! + ! write dataset. + ! + f_ptr = C_LOC(buf3(1)) + CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, f_ptr, errcode) + + ! + ! read dataset. + ! + f_ptr = C_LOC(bufr3(1)) + CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, f_ptr, errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf3(i) .NE. bufr3(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr3(i), ' and ', buf3(i) + STOP + ENDIF + END DO + + CALL passed() + + !------------------------------------------------------------------------- + ! double + !------------------------------------------------------------------------- + + CALL test_begin(' Make/Read datasets (double) ') + + + ! + ! write dataset. + ! + !f_ptr = C_LOC(buf4(1)) + !CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, f_ptr, errcode) + CALL h5ltmake_dataset_double_f(file_id, dsetname4, rank, dims, buf4, errcode) + + ! + ! read dataset. + ! + !f_ptr = C_LOC(buf4(1)) + !CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, f_ptr, errcode) + CALL h5ltread_dataset_double_f(file_id, dsetname4, bufr4, dims, errcode) + + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf4(i) .NE. bufr4(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr4(i), ' and ', buf4(i) + STOP + ENDIF + END DO + + CALL passed() + + + !------------------------------------------------------------------------- + ! string + !------------------------------------------------------------------------- + + CALL test_begin(' Make/Read datasets (string) ') + + + ! + ! write dataset. + ! + CALL h5ltmake_dataset_string_f(file_id, dsetname5, buf1, errcode) + + ! + ! read dataset. + ! + CALL h5ltread_dataset_string_f(file_id, dsetname5, buf1r, errcode) + + ! + ! compare read and write buffers. + ! + IF ( buf1 .NE. buf1r ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf1, ' and ', buf1r + STOP + ENDIF + + CALL passed() + + CALL test_begin(' Test h5ltpath_valid_f ') + ! + ! test function h5ltpath_valid_f + ! + chr_exact = "/"//dsetname2 ! test character buffer the exact size needed + CALL h5ltpath_valid_f(file_id, chr_exact, .TRUE., path_valid, errcode) + IF(errcode.LT.0.OR..NOT.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + chr_lg = "/"//dsetname2 ! test character buffer larger then needed + CALL h5ltpath_valid_f(file_id, chr_lg, .TRUE., path_valid, errcode) + IF(errcode.LT.0.OR..NOT.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + CALL h5ltpath_valid_f(file_id, chr_lg, .FALSE., path_valid, errcode) + IF(errcode.LT.0.OR..NOT.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + ! Should fail, dataset does not exist + CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .TRUE., path_valid, errcode) + IF(errcode.LT.0.OR.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .FALSE., path_valid, errcode) + IF(errcode.LT.0.OR.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + ! Create a dangling soft link + CALL h5lcreate_soft_f("/G2", file_id, "/G3", errcode) + + ! Should pass, does not check for dangled link + CALL h5ltpath_valid_f(file_id, "/G3", .FALSE., path_valid, errcode) + IF(.NOT.path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + ! Should fail, dangled link + CALL h5ltpath_valid_f(file_id, "/G2", .TRUE., path_valid, errcode) + IF(path_valid)THEN + PRINT *, 'error in h5ltpath_valid_f' + STOP + ENDIF + + CALL passed() + + + CALL test_begin(' Get dataset dimensions/info ') + + !------------------------------------------------------------------------- + ! h5ltget_dataset_ndims_f + !------------------------------------------------------------------------- + + CALL h5ltget_dataset_ndims_f(file_id, dsetname4, rankr, errcode) + IF ( rankr .NE. rank ) THEN + PRINT *, 'h5ltget_dataset_ndims_f return error' + STOP + ENDIF + + + !------------------------------------------------------------------------- + ! test h5ltfind_dataset_f function + !------------------------------------------------------------------------- + + + has = h5ltfind_dataset_f(file_id,dsetname4) + IF ( has .NE. 1 ) THEN + PRINT *, 'h5ltfind_dataset_f return error' + STOP + ENDIF + + !------------------------------------------------------------------------- + ! test h5ltget_dataset_info_f function + !------------------------------------------------------------------------- + + + CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) + + ! + ! compare dimensions + ! + DO i = 1, rank + IF ( dimsr(i) .NE. dims(i) ) THEN + PRINT *, 'dimensions differ ' + STOP + ENDIF + END DO + + IF ( type_class .NE. 1 ) THEN ! H5T_FLOAT + PRINT *, 'wrong type class ' + STOP + ENDIF + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + CALL passed() + ! + ! end function. + ! +END SUBROUTINE test_datasets + + + +!------------------------------------------------------------------------- +! test_attributes +!------------------------------------------------------------------------- + +SUBROUTINE test_attributes() + + USE, INTRINSIC :: ISO_C_BINDING + USE H5LT ! module of H5LT + USE HDF5 ! module of HDF5 library + + IMPLICIT NONE + + CHARACTER(len=9), PARAMETER :: filename = "dsetf5.h5"! File name + CHARACTER(len=9), PARAMETER :: filename1 ="tattr.h5" ! C written attribute file + INTEGER(HID_T) :: file_id ! File identifier +! INTEGER(HID_T) :: file_id1 + INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array + CHARACTER(LEN=5), PARAMETER :: attrname1 = "attr1" ! Attribute name + CHARACTER(LEN=5), PARAMETER :: attrname2 = "attr2" ! Attribute name + CHARACTER(LEN=5), PARAMETER :: attrname3 = "attr3" ! Attribute name + CHARACTER(LEN=5), PARAMETER :: attrname4 = "attr4" ! Attribute name + CHARACTER(LEN=5), PARAMETER :: attrname5 = "attr5" ! Attribute name + CHARACTER(LEN=8), PARAMETER :: buf1 = "mystring" ! Data buffer + CHARACTER(LEN=16), PARAMETER :: buf_c = "string attribute" + CHARACTER(LEN=8) :: bufr1 ! Data buffer + CHARACTER(LEN=10) :: bufr1_lg ! Data buffer +! CHARACTER(LEN=16) :: bufr_c ! Data buffer +! CHARACTER(LEN=18) :: bufr_c_lg ! Data buffer + INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer + INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer + REAL, DIMENSION(DIM1), target :: buf3 ! Data buffer + REAL, DIMENSION(DIM1), target :: bufr3 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: buf4 ! Data buffer + DOUBLE PRECISION, DIMENSION(DIM1), TARGET :: bufr4 ! Data buffer + INTEGER :: errcode ! Error flag + INTEGER :: i, n ! general purpose integer + INTEGER(SIZE_T) size ! size of attribute array + INTEGER :: rankr ! rank + INTEGER(HSIZE_T), DIMENSION(1) :: dimsr ! attribute dimensions + INTEGER :: type_class + INTEGER(SIZE_T) :: type_size + INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions + INTEGER :: rank = 1 ! Dataset rank + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + INTEGER, DIMENSION(DIM1) :: buf ! Data buffer + INTEGER(SIZE_T) :: SizeOf_buf_type + TYPE(C_PTR) :: f_ptr + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + ! + ! make a dataset. + ! + CALL h5ltmake_dataset_int_f(file_id, dsetname1, rank, dims, buf, errcode) + + ! + ! Initialize the data array. + ! + size = DIM1 + n = 1 + DO i = 1, DIM1 + buf2(i) = n + buf3(i) = n + buf4(i) = n + n = n + 1 + END DO + + + !------------------------------------------------------------------------- + ! int + !------------------------------------------------------------------------- + + CALL test_begin(' Set/Get attributes int ') + + + ! + ! write attribute. + ! + CALL h5ltset_attribute_int_f(file_id,dsetname1,attrname2,buf2,size,errcode) + + ! + ! read attribute. + ! + CALL h5ltget_attribute_int_f(file_id,dsetname1,attrname2,bufr2,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf2(i) .NE. bufr2(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr2(i), ' and ', buf2(i) + STOP + ENDIF + END DO + + CALL passed() + + !------------------------------------------------------------------------- + ! float + !------------------------------------------------------------------------- + + CALL test_begin(' Set/Get attributes float ') + + + ! + ! write attribute. + ! +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + SizeOf_buf_type = STORAGE_SIZE(buf3(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf3(1)) +#endif + f_ptr = C_LOC(buf3(1)) + CALL h5ltset_attribute_f(file_id,dsetname1,attrname3,f_ptr,"REAL", SizeOf_buf_type, size,errcode) + !CALL h5ltset_attribute_float_f(file_id,dsetname1,attrname3,buf3,size,errcode) + ! + ! read attribute. + ! +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + SizeOf_buf_type = STORAGE_SIZE(bufr3(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(bufr3(1)) +#endif + + f_ptr = C_LOC(bufr3(1)) + CALL h5ltget_attribute_f(file_id,dsetname1,attrname3,f_ptr,"REAL",SizeOf_buf_type,errcode) + !CALL h5ltget_attribute_float_f(file_id,dsetname1,attrname3,bufr3,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf3(i) .NE. bufr3(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr3(i), ' and ', buf3(i) + STOP + ENDIF + END DO + + CALL passed() + + !------------------------------------------------------------------------- + ! double + !------------------------------------------------------------------------- + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + SizeOf_buf_type = STORAGE_SIZE(buf4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(buf4(1)) +#endif + + IF(SizeOf_buf_type.LT.16)THEN ! MSB can't handle 16 byte reals + + CALL test_begin(' Set/Get attributes double ') + + ! + ! write attribute. + ! + f_ptr = C_LOC(buf4(1)) + CALL h5ltset_attribute_f(file_id,dsetname1,attrname4,f_ptr,"real", SizeOf_buf_type, size, errcode) + +! CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4, size, errcode) + + ! + ! read attribute. + ! + +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + SizeOf_buf_type = STORAGE_SIZE(bufr4(1), c_size_t)/STORAGE_SIZE(c_char_'a',c_size_t) +#else + SizeOf_buf_type = SIZEOF(bufr4(1)) +#endif + + f_ptr = C_LOC(bufr4(1)) + CALL h5ltget_attribute_f(file_id,dsetname1,attrname4,f_ptr,"REAL",SizeOf_buf_type,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, DIM1 + IF ( buf4(i) .NE. bufr4(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufr4(i), ' and ', buf4(i) + STOP + ENDIF + END DO + + CALL passed() + + ENDIF + + !------------------------------------------------------------------------- + ! string + !------------------------------------------------------------------------- + + CALL test_begin(' Set/Get attributes string ') + + ! + ! write attribute. + ! + CALL h5ltset_attribute_string_f(file_id,dsetname1,attrname5,buf1,errcode) + + ! + ! read attribute into a fortran character buf that is the same size as buf1. + ! + CALL h5ltget_attribute_string_f(file_id,dsetname1,attrname5,bufr1,errcode) + + ! + ! compare read and write buffers. + ! + IF ( buf1 .NE. bufr1 ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, buf1, ' and ', bufr1 + STOP + ENDIF + + ! + ! read attribute into a fortran character buf that is larger then buf1. + ! + CALL h5ltget_attribute_string_f(file_id,dsetname1,attrname5,bufr1_lg,errcode) + + ! + ! compare read and write buffers, make sure C NULL character was removed. + ! + IF ( buf1(1:8) .NE. bufr1_lg(1:8) .AND. bufr1_lg(9:10) .NE. ' ' ) THEN + PRINT *, 'larger read buffer differs from write buffer' + PRINT *, buf1, ' and ', bufr1_lg + STOP + ENDIF + + ! + ! ** Test reading a string that was created with a C program ** + ! + +!!$ CALL h5fopen_f(filename1, H5F_ACC_RDONLY_F, file_id1, errcode) +!!$ +!!$ CALL h5ltget_attribute_string_f(file_id1, "/", "attr5", bufr_c, errcode) +!!$ ! +!!$ ! compare read and write buffers. +!!$ ! +!!$ IF ( bufr_c .NE. buf_c ) THEN +!!$ PRINT *, 'read buffer differs from write buffer' +!!$ PRINT *, bufr1, ' and ', buf_c +!!$ STOP +!!$ ENDIF +!!$ ! +!!$ ! read attribute into a fortran character buf that is larger then buf_c. +!!$ ! +!!$ CALL h5ltget_attribute_string_f(file_id1, "/", "attr5", bufr_c_lg, errcode) +!!$ +!!$ ! +!!$ ! compare read and write buffers, make sure C NULL character was removed. +!!$ ! +!!$ IF ( buf_c(1:16) .NE. bufr_c_lg(1:16) .AND. bufr_c_lg(17:18) .NE. ' ' ) THEN +!!$ PRINT *, 'larger read buffer differs from write buffer' +!!$ PRINT *, buf_c, ' and ', bufr_c_lg +!!$ STOP +!!$ ENDIF + +!!$ CALL h5fclose_f(file_id1, errcode) + + CALL passed() + + !------------------------------------------------------------------------- + ! get attribute rank + !------------------------------------------------------------------------- + + CALL test_begin(' Get attribute rank/info ') + + + CALL h5ltget_attribute_ndims_f(file_id,dsetname1,attrname2,rankr,errcode) + + IF ( rankr .NE. 1 ) THEN + PRINT *, 'h5ltget_attribute_ndims_f return error' + STOP + ENDIF + + + CALL h5ltget_attribute_info_f(file_id,dsetname1,attrname2,dimsr,type_class,type_size,errcode) + + ! + ! compare dimensions + ! + DO i = 1, rank + IF ( dimsr(i) .NE. dims(i) ) THEN + PRINT *, 'dimensions differ ' + STOP + ENDIF + END DO + + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + CALL passed() + ! + ! end function. + ! +END SUBROUTINE test_attributes + +!------------------------------------------------------------------------- +! test_begin +!------------------------------------------------------------------------- + +SUBROUTINE test_begin(string) + CHARACTER(LEN=*), INTENT(IN) :: string + WRITE(*, fmt = '(14a)', advance = 'no') string + WRITE(*, fmt = '(40x,a)', advance = 'no') ' ' +END SUBROUTINE test_begin + +!------------------------------------------------------------------------- +! passed +!------------------------------------------------------------------------- + +SUBROUTINE passed() + WRITE(*, fmt = '(6a)') 'PASSED' +END SUBROUTINE passed diff --git a/hl/fortran/test/tstlite.f90 b/hl/fortran/test/tstlite.f90 deleted file mode 100644 index d035b89..0000000 --- a/hl/fortran/test/tstlite.f90 +++ /dev/null @@ -1,1628 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains the FORTRAN90 tests for H5LT -! - -PROGRAM lite_test - - CALL test_dataset1D() - CALL test_dataset2D() - CALL test_dataset3D() - CALL test_datasetND(4) - CALL test_datasetND(5) - CALL test_datasetND(6) - CALL test_datasetND(7) - CALL test_datasets() - CALL test_attributes() - -END PROGRAM lite_test - - -!------------------------------------------------------------------------- -! test_dataset1D -!------------------------------------------------------------------------- - -SUBROUTINE test_dataset1D() - -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - -INTEGER, PARAMETER :: DIM1 = 4; ! Dimension of array -CHARACTER(len=9), PARAMETER :: filename = "dsetf1.h5"! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions -INTEGER :: rank = 1 ! Dataset rank -INTEGER, DIMENSION(DIM1) :: buf1 ! Data buffer -INTEGER, DIMENSION(DIM1) :: bufr1 ! Data buffer -REAL, DIMENSION(DIM1) :: buf2 ! Data buffer -REAL, DIMENSION(DIM1) :: bufr2 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1) :: buf3 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1) :: bufr3 ! Data buffer -INTEGER :: errcode ! Error flag -INTEGER :: i ! general purpose integer - - -CALL test_begin(' Make/Read datasets (1D) ') - -! -! Initialize the data array. -! -DO i = 1, DIM1 - buf1(i) = i; - buf2(i) = i; - buf3(i) = i; -END DO - -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) - -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - -!------------------------------------------------------------------------- -! H5T_NATIVE_INTEGER -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf1, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr1, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf1(i) .NE. bufr1(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr1(i), ' and ', buf1(i) - STOP - ENDIF -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_REAL, buf2, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_REAL, bufr2, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf2(i) .NE. bufr2(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr2(i), ' and ', buf2(i) - STOP - ENDIF -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_DOUBLE, buf3, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_DOUBLE, bufr3, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, DIM1 - IF ( buf3(i) .NE. bufr3(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr3(i), ' and ', buf3(i) - STOP - ENDIF -END DO - -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) - -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) - -CALL passed() -! -! end function. -! -END SUBROUTINE test_dataset1D - -!------------------------------------------------------------------------- -! test_dataset2D -!------------------------------------------------------------------------- - -SUBROUTINE test_dataset2D() - -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - - -INTEGER(HSIZE_T), PARAMETER :: DIM1 = 4; ! columns -INTEGER(HSIZE_T), PARAMETER :: DIM2 = 6; ! rows -CHARACTER(len=9), PARAMETER :: filename = "dsetf2.h5"! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(2) :: dims = (/4,6/) ! Dataset dimensions -INTEGER :: rank = 2 ! Dataset rank -INTEGER, DIMENSION(DIM1*DIM2) :: buf ! Data buffer -INTEGER, DIMENSION(DIM1*DIM2) :: bufr ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2) :: buf2 ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2) :: buf2r ! Data buffer -REAL, DIMENSION(DIM1,DIM2) :: buf3 ! Data buffer -REAL, DIMENSION(DIM1,DIM2) :: buf3r ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2) :: buf4 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2) :: buf4r ! Data buffer -INTEGER :: errcode ! Error flag -INTEGER(HSIZE_T) :: i, j, n ! general purpose integers - -CALL test_begin(' Make/Read datasets (2D) ') - - -! -! Initialize the data arrays. -! -n=1 -DO i = 1, DIM1*DIM2 - buf(i) = INT(n) - n = n + 1 -END DO - -DO i = 1, dims(1) - DO j = 1, dims(2) - buf2(i,j) = INT((i-1)*dims(2) + j) - buf3(i,j) = INT((i-1)*dims(2) + j) - buf4(i,j) = INT((i-1)*dims(2) + j) - END DO -END DO - - -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) - -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 1D buffer -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, DIM1*DIM2 - IF ( buf(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr(i), ' and ', buf(i) - STOP - ENDIF -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 2D buffer -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf2(i,j) .NE. buf2r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf2r(i,j), ' and ', buf2(i,j) - STOP - ENDIF - END DO -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf3(i,j) .NE. buf3r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf3r(i,j), ' and ', buf3(i,j) - STOP - ENDIF - END DO -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - IF ( buf4(i,j) .NE. buf4r(i,j) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf4r(i,j), ' and ', buf4(i,j) - STOP - ENDIF - END DO -END DO - -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) - -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) - -CALL passed() -! -! end function. -! -END SUBROUTINE test_dataset2D - - -!------------------------------------------------------------------------- -! test_dataset3D -!------------------------------------------------------------------------- - - -SUBROUTINE test_dataset3D() - -USE H5LT ! module of H5LT -USE HDF5 ! module of HDF5 library - -IMPLICIT NONE - -INTEGER, PARAMETER :: DIM1 = 6 ! columns -INTEGER, PARAMETER :: DIM2 = 4 ! rows -INTEGER, PARAMETER :: DIM3 = 2 ! layers -CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name -CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name -CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name -INTEGER(HID_T) :: file_id ! File identifier -INTEGER(HSIZE_T), DIMENSION(3) :: dims = (/DIM1,DIM2,DIM3/) ! Dataset dimensions -INTEGER(HSIZE_T), DIMENSION(3) :: dimsr ! Dataset dimensions -INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: buf ! Data buffer -INTEGER, DIMENSION(DIM1*DIM2*DIM3) :: bufr ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2 ! Data buffer -INTEGER, DIMENSION(DIM1,DIM2,DIM3) :: buf2r ! Data buffer -REAL, DIMENSION(DIM1,DIM2,DIM3) :: buf3 ! Data buffer -REAL, DIMENSION(DIM1,DIM2,DIM3) :: buf3r ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3) :: buf4 ! Data buffer -DOUBLE PRECISION, DIMENSION(DIM1,DIM2,DIM3) :: buf4r ! Data buffer -INTEGER :: rank = 3 ! Dataset rank -INTEGER :: errcode ! Error flag -INTEGER(HSIZE_T) :: i, j, k, n ! general purpose integers -INTEGER :: type_class -INTEGER(SIZE_T) :: type_size - -CALL test_begin(' Make/Read datasets (3D) ') - - -! -! Initialize the data array. -! -n=1 -DO i = 1, DIM1*DIM2*DIM3 - buf(i) = INT(n) - n = n + 1 -END DO - -n = 1 -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - buf2(i,j,k) = INT(n) - buf3(i,j,k) = INT(n) - buf4(i,j,k) = INT(n) - n = n + 1 - END DO - END DO -END DO - -! -! Initialize FORTRAN predefined datatypes. -! -CALL h5open_f(errcode) - -! -! Create a new file using default properties. -! -CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 1D buffer -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname1, rank, dims, H5T_NATIVE_INTEGER, buf, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname1, H5T_NATIVE_INTEGER, bufr, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, DIM1*DIM2*DIM3 - IF ( buf(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr(i), ' and ', buf(i) - STOP - ENDIF -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_INT 3D buffer -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims, H5T_NATIVE_INTEGER, buf2, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, buf2r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf2(i,j,k) .NE. buf2r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf2r(i,j,k), ' and ', buf2(i,j,k) - STOP - ENDIF - END DO - END DO -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_REAL -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims, H5T_NATIVE_REAL, buf3, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, buf3r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf3(i,j,k) .NE. buf3r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf3r(i,j,k), ' and ', buf3(i,j,k) - STOP - ENDIF - END DO - END DO -END DO - -!------------------------------------------------------------------------- -! H5T_NATIVE_DOUBLE -!------------------------------------------------------------------------- - -! -! write dataset. -! -CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims, H5T_NATIVE_DOUBLE, buf4, errcode) - -! -! read dataset. -! -CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, buf4r, dims, errcode) - -! -! compare read and write buffers. -! -DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - IF ( buf4(i,j,k) .NE. buf4r(i,j,k) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf4r(i,j,k), ' and ', buf4(i,j,k) - STOP - ENDIF - END DO - END DO -END DO - -CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) - -! -! compare dimensions -! -DO i = 1, rank - IF ( dimsr(i) .NE. dims(i) ) THEN - PRINT *, 'dimensions differ ' - STOP - ENDIF -END DO - -! -! Close the file. -! -CALL h5fclose_f(file_id, errcode) - -! -! Close FORTRAN predefined datatypes. -! -CALL h5close_f(errcode) - -CALL passed() -! -! end function. -! -END SUBROUTINE test_dataset3D - -!------------------------------------------------------------------------- -! test_datasetND -!------------------------------------------------------------------------- - - -SUBROUTINE test_datasetND(rank) - - USE H5LT ! module of H5LT - USE HDF5 ! module of HDF5 library - - IMPLICIT NONE - - INTEGER :: rank ! Dataset rank - - INTEGER, PARAMETER :: DIM1 = 2 ! columns - INTEGER, PARAMETER :: DIM2 = 4 ! rows - INTEGER, PARAMETER :: DIM3 = 2 ! layers - INTEGER, PARAMETER :: DIM4 = 5 ! columns - INTEGER, PARAMETER :: DIM5 = 4 ! rows - INTEGER, PARAMETER :: DIM6 = 3 ! layers - INTEGER, PARAMETER :: DIM7 = 2 ! layers - CHARACTER(len=9), PARAMETER :: filename = "dsetf3.h5" ! File name - CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HSIZE_T), DIMENSION(7) :: dims - INTEGER(HSIZE_T), DIMENSION(7) :: dimsr ! Dataset dimensions - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:) :: ibuf_4 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:) :: ibufr_4 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: ibuf_5 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: ibufr_5 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: ibuf_6 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: ibufr_6 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: ibuf_7 ! Data buffer - INTEGER, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: ibufr_7 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:) :: rbuf_4 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:) :: rbufr_4 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: rbuf_5 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: rbufr_5 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: rbuf_6 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: rbufr_6 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: rbuf_7 ! Data buffer - REAL, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: rbufr_7 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:) :: dbuf_4 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:) :: dbufr_4 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: dbuf_5 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:) :: dbufr_5 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: dbuf_6 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:) :: dbufr_6 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: dbuf_7 ! Data buffer - DOUBLE PRECISION, ALLOCATABLE, DIMENSION(:,:,:,:,:,:,:) :: dbufr_7 ! Data buffer - INTEGER :: errcode ! Error flag - INTEGER(HSIZE_T) :: i, j, k, l, m, n, o, nn ! general purpose integers - INTEGER :: type_class - INTEGER(SIZE_T) :: type_size - CHARACTER(LEN=1) :: ichr1 - - WRITE(ichr1,'(I1.1)') rank - CALL test_begin(' Make/Read datasets ('//ichr1//'D) ') -! -! Initialize the data array. -! - IF(rank.EQ.4)THEN - - ALLOCATE(ibuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - ALLOCATE(ibufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - ALLOCATE(rbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - ALLOCATE(rbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - ALLOCATE(dbuf_4 (1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - ALLOCATE(dbufr_4(1:DIM1,1:DIM2,1:DIM3,1:DIM4)) - - dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,0,0,0/) - - nn = 1 - DO i = 1, DIM1 - DO j = 1, DIM2 - DO k = 1, DIM3 - DO l = 1, DIM4 - ibuf_4(i,j,k,l) = INT(nn) - rbuf_4(i,j,k,l) = INT(nn) - dbuf_4(i,j,k,l) = INT(nn) - nn = nn + 1 - END DO - END DO - END DO - ENDDO - - ELSE IF(rank.EQ.5)THEN - - ALLOCATE(ibuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - ALLOCATE(ibufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - ALLOCATE(rbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - ALLOCATE(rbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - ALLOCATE(dbuf_5 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - ALLOCATE(dbufr_5(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5)) - - dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,0,0/) - - nn = 1 - DO i = 1, DIM1 - DO j = 1, DIM2 - DO k = 1, DIM3 - DO l = 1, DIM4 - DO m = 1, DIM5 - ibuf_5(i,j,k,l,m) = INT(nn) - rbuf_5(i,j,k,l,m) = INT(nn) - dbuf_5(i,j,k,l,m) = INT(nn) - nn = nn + 1 - END DO - END DO - END DO - ENDDO - ENDDO - - ELSE IF(rank.EQ.6)THEN - - ALLOCATE(ibuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - ALLOCATE(ibufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - ALLOCATE(rbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - ALLOCATE(rbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - ALLOCATE(dbuf_6 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - ALLOCATE(dbufr_6(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6)) - - dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,0/) - - nn = 1 - DO i = 1, DIM1 - DO j = 1, DIM2 - DO k = 1, DIM3 - DO l = 1, DIM4 - DO m = 1, DIM5 - DO n = 1, DIM6 - ibuf_6(i,j,k,l,m,n) = INT(nn) - rbuf_6(i,j,k,l,m,n) = INT(nn) - dbuf_6(i,j,k,l,m,n) = INT(nn) - nn = nn + 1 - END DO - END DO - END DO - ENDDO - ENDDO - ENDDO - - ELSE IF(rank.EQ.7)THEN - - ALLOCATE(ibuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - ALLOCATE(ibufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - ALLOCATE(rbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - ALLOCATE(rbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - ALLOCATE(dbuf_7 (1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - ALLOCATE(dbufr_7(1:DIM1,1:DIM2,1:DIM3,1:DIM4,1:DIM5,1:DIM6,1:DIM7)) - - dims(1:7) = (/DIM1,DIM2,DIM3,DIM4,DIM5,DIM6,DIM7/) - - nn = 1 - DO i = 1, DIM1 - DO j = 1, DIM2 - DO k = 1, DIM3 - DO l = 1, DIM4 - DO m = 1, DIM5 - DO n = 1, DIM6 - DO o = 1, DIM7 - ibuf_7(i,j,k,l,m,n,o) = INT(nn) - rbuf_7(i,j,k,l,m,n,o) = INT(nn) - dbuf_7(i,j,k,l,m,n,o) = INT(nn) - nn = nn + 1 - END DO - END DO - END DO - ENDDO - ENDDO - ENDDO - ENDDO - - ENDIF - - ! - ! Initialize FORTRAN predefined datatypes. - ! - CALL h5open_f(errcode) - - ! - ! Create a new file using default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - - !------------------------------------------------------------------------- - ! H5T_NATIVE_INT ND buffer - !------------------------------------------------------------------------- - - ! - ! write dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_4, errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_5, errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_6, errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltmake_dataset_f(file_id, dsetname2, rank, dims(1:rank), H5T_NATIVE_INTEGER, ibuf_7, errcode) - ENDIF - - - ! - ! read dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_4, dims(1:rank), errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_5, dims(1:rank), errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_6, dims(1:rank), errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltread_dataset_f(file_id, dsetname2, H5T_NATIVE_INTEGER, ibufr_7, dims(1:rank), errcode) - ENDIF - - ! - ! compare read and write buffers. - ! - DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - DO l = 1, dims(4) - IF(rank.EQ.4)THEN - IF ( ibuf_4(i,j,k,l) .NE. ibufr_4(i,j,k,l) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, ibuf_4(i,j,k,l), ' and ', ibufr_4(i,j,k,l) - STOP - ENDIF - ENDIF - DO m = 1, dims(5) - IF(rank.EQ.5)THEN - IF ( ibuf_5(i,j,k,l,m) .NE. ibufr_5(i,j,k,l,m) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, ibuf_5(i,j,k,l,m), ' and ', ibufr_5(i,j,k,l,m) - STOP - ENDIF - ENDIF - DO n = 1, dims(6) - IF(rank.EQ.6)THEN - IF ( ibuf_6(i,j,k,l,m,n) .NE. ibufr_6(i,j,k,l,m,n) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, ibuf_6(i,j,k,l,m,n), ' and ', ibufr_6(i,j,k,l,m,n) - STOP - ENDIF - ENDIF - DO o = 1, dims(7) - IF(rank.EQ.7)THEN - IF ( ibuf_7(i,j,k,l,m,n,o) .NE. ibufr_7(i,j,k,l,m,n,o) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, ibuf_7(i,j,k,l,m,n,o), ' and ', ibufr_7(i,j,k,l,m,n,o) - STOP - ENDIF - ENDIF - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - !------------------------------------------------------------------------- - ! H5T_NATIVE_REAL - !------------------------------------------------------------------------- - - ! - ! write dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_4, errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_5, errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_6, errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltmake_dataset_f(file_id, dsetname3, rank, dims(1:rank), H5T_NATIVE_REAL, rbuf_7, errcode) - ENDIF - - - ! - ! read dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, rbufr_4, dims(1:rank), errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, rbufr_5, dims(1:rank), errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, rbufr_6, dims(1:rank), errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltread_dataset_f(file_id, dsetname3, H5T_NATIVE_REAL, rbufr_7, dims(1:rank), errcode) - ENDIF - - ! - ! compare read and write buffers. - ! - DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - DO l = 1, dims(4) - IF(rank.EQ.4)THEN - IF ( rbuf_4(i,j,k,l) .NE. rbufr_4(i,j,k,l) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, rbuf_4(i,j,k,l), ' and ', rbufr_4(i,j,k,l) - STOP - ENDIF - ENDIF - DO m = 1, dims(5) - IF(rank.EQ.5)THEN - IF ( rbuf_5(i,j,k,l,m) .NE. rbufr_5(i,j,k,l,m) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, rbuf_5(i,j,k,l,m), ' and ', rbufr_5(i,j,k,l,m) - STOP - ENDIF - ENDIF - DO n = 1, dims(6) - IF(rank.EQ.6)THEN - IF ( rbuf_6(i,j,k,l,m,n) .NE. rbufr_6(i,j,k,l,m,n) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, rbuf_6(i,j,k,l,m,n), ' and ', rbufr_6(i,j,k,l,m,n) - STOP - ENDIF - ENDIF - DO o = 1, dims(7) - IF(rank.EQ.7)THEN - IF ( rbuf_7(i,j,k,l,m,n,o) .NE. rbufr_7(i,j,k,l,m,n,o) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, rbuf_7(i,j,k,l,m,n,o), ' and ', rbufr_7(i,j,k,l,m,n,o) - STOP - ENDIF - ENDIF - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - - !------------------------------------------------------------------------- - ! H5T_NATIVE_DOUBLE - !------------------------------------------------------------------------- - - ! - ! write dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, dbuf_4, errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, dbuf_5, errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, dbuf_6, errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltmake_dataset_f(file_id, dsetname4, rank, dims(1:rank), H5T_NATIVE_DOUBLE, dbuf_7, errcode) - ENDIF - - - ! - ! read dataset. - ! - IF(rank.EQ.4)THEN - CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, dbufr_4, dims(1:rank), errcode) - ELSE IF(rank.EQ.5)THEN - CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, dbufr_5, dims(1:rank), errcode) - ELSE IF(rank.EQ.6)THEN - CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, dbufr_6, dims(1:rank), errcode) - ELSE IF(rank.EQ.7)THEN - CALL h5ltread_dataset_f(file_id, dsetname4, H5T_NATIVE_DOUBLE, dbufr_7, dims(1:rank), errcode) - ENDIF - - ! - ! compare read and write buffers. - ! - DO i = 1, dims(1) - DO j = 1, dims(2) - DO k = 1, dims(3) - DO l = 1, dims(4) - IF(rank.EQ.4)THEN - IF ( dbuf_4(i,j,k,l) .NE. dbufr_4(i,j,k,l) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, dbuf_4(i,j,k,l), ' and ', dbufr_4(i,j,k,l) - STOP - ENDIF - ENDIF - DO m = 1, dims(5) - IF(rank.EQ.5)THEN - IF ( dbuf_5(i,j,k,l,m) .NE. dbufr_5(i,j,k,l,m) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, dbuf_5(i,j,k,l,m), ' and ', dbufr_5(i,j,k,l,m) - STOP - ENDIF - ENDIF - DO n = 1, dims(6) - IF(rank.EQ.6)THEN - IF ( dbuf_6(i,j,k,l,m,n) .NE. dbufr_6(i,j,k,l,m,n) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, dbuf_6(i,j,k,l,m,n), ' and ', dbufr_6(i,j,k,l,m,n) - STOP - ENDIF - ENDIF - DO o = 1, dims(7) - IF(rank.EQ.7)THEN - IF ( dbuf_7(i,j,k,l,m,n,o) .NE. dbufr_7(i,j,k,l,m,n,o) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, dbuf_7(i,j,k,l,m,n,o), ' and ', dbufr_7(i,j,k,l,m,n,o) - STOP - ENDIF - ENDIF - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - ENDDO - - CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) - - ! - ! compare dimensions - ! - DO i = 1, rank - IF ( dimsr(i) .NE. dims(i) ) THEN - PRINT *, 'dimensions differ ' - STOP - ENDIF - END DO - - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, errcode) - - ! - ! Close FORTRAN predefined datatypes. - ! - CALL h5close_f(errcode) - - ! DEALLOCATE RESOURCES - - IF(rank.EQ.4)THEN - DEALLOCATE(ibuf_4, ibufr_4, rbuf_4, rbufr_4, dbuf_4, dbufr_4) - ELSE IF(rank.EQ.5)THEN - DEALLOCATE(ibuf_5, ibufr_5, rbuf_5, rbufr_5, dbuf_5, dbufr_5) - ELSE IF(rank.EQ.6)THEN - DEALLOCATE(ibuf_6, ibufr_6, rbuf_6, rbufr_6, dbuf_6, dbufr_6) - ELSE IF(rank.EQ.7)THEN - DEALLOCATE(ibuf_7, ibufr_7, rbuf_7, rbufr_7, dbuf_7, dbufr_7) - ENDIF - - CALL passed() - ! - ! end function. - ! -END SUBROUTINE test_datasetND - - - -!------------------------------------------------------------------------- -! test_datasets -!------------------------------------------------------------------------- - -SUBROUTINE test_datasets() - - USE H5LT ! module of H5LT - USE HDF5 ! module of HDF5 library - - IMPLICIT NONE - - CHARACTER(len=9), PARAMETER :: filename = "dsetf4.h5"! File name - INTEGER(HID_T) :: file_id ! File identifier - INTEGER :: errcode ! Error flag - INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array - CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname2 = "dset2" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname3 = "dset3" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname4 = "dset4" ! Dataset name - CHARACTER(LEN=5), PARAMETER :: dsetname5 = "dset5" ! Dataset name - INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions - INTEGER(HSIZE_T), DIMENSION(1) :: dimsr ! Dataset dimensions - INTEGER :: rank = 1 ! Dataset rank - INTEGER :: rankr ! Dataset rank - CHARACTER(LEN=8), PARAMETER :: buf1 = "mystring" ! Data buffer - CHARACTER(LEN=8) :: buf1r ! Data buffer - INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer - INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer - REAL, DIMENSION(DIM1) :: buf3 ! Data buffer - REAL, DIMENSION(DIM1) :: bufr3 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1) :: buf4 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1) :: bufr4 ! Data buffer - INTEGER :: i, n ! general purpose integer - INTEGER :: has ! general purpose integer - INTEGER :: type_class - INTEGER(SIZE_T) :: type_size - LOGICAL :: path_valid ! status of the path - CHARACTER(LEN=6) :: chr_exact - CHARACTER(LEN=8) :: chr_lg - - ! - ! Initialize FORTRAN predefined datatypes. - ! - CALL h5open_f(errcode) - - ! - ! Create a new file using default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - - ! - ! Initialize the data array. - ! - n = 1 - DO i = 1, DIM1 - buf2(i) = n - buf3(i) = n - buf4(i) = n - n = n + 1 - END DO - - !------------------------------------------------------------------------- - ! int - !------------------------------------------------------------------------- - - CALL test_begin(' Make/Read datasets (integer) ') - - ! - ! write dataset. - ! - CALL h5ltmake_dataset_int_f(file_id, dsetname2, rank, dims, buf2, errcode) - - ! - ! read dataset. - ! - CALL h5ltread_dataset_int_f(file_id, dsetname2, bufr2, dims, errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf2(i) .NE. bufr2(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr2(i), ' and ', buf2(i) - STOP - ENDIF - END DO - - CALL passed() - - - !------------------------------------------------------------------------- - ! real - !------------------------------------------------------------------------- - - CALL test_begin(' Make/Read datasets (float) ') - - - ! - ! write dataset. - ! - CALL h5ltmake_dataset_float_f(file_id, dsetname3, rank, dims, buf3, errcode) - - ! - ! read dataset. - ! - CALL h5ltread_dataset_float_f(file_id, dsetname3, bufr3, dims, errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf3(i) .NE. bufr3(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr3(i), ' and ', buf3(i) - STOP - ENDIF - END DO - - CALL passed() - - !------------------------------------------------------------------------- - ! double - !------------------------------------------------------------------------- - - CALL test_begin(' Make/Read datasets (double) ') - - - ! - ! write dataset. - ! - CALL h5ltmake_dataset_double_f(file_id, dsetname4, rank, dims, buf4, errcode) - - ! - ! read dataset. - ! - CALL h5ltread_dataset_double_f(file_id, dsetname4, bufr4, dims, errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf4(i) .NE. bufr4(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr4(i), ' and ', buf4(i) - STOP - ENDIF - END DO - - CALL passed() - - - !------------------------------------------------------------------------- - ! string - !------------------------------------------------------------------------- - - CALL test_begin(' Make/Read datasets (string) ') - - - ! - ! write dataset. - ! - CALL h5ltmake_dataset_string_f(file_id, dsetname5, buf1, errcode) - - ! - ! read dataset. - ! - CALL h5ltread_dataset_string_f(file_id, dsetname5, buf1r, errcode) - - ! - ! compare read and write buffers. - ! - IF ( buf1 .NE. buf1r ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf1, ' and ', buf1r - STOP - ENDIF - - CALL passed() - - CALL test_begin(' Test h5ltpath_valid_f ') - ! - ! test function h5ltpath_valid_f - ! - chr_exact = "/"//dsetname2 ! test character buffer the exact size needed - CALL h5ltpath_valid_f(file_id, chr_exact, .TRUE., path_valid, errcode) - IF(errcode.LT.0.OR..NOT.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - chr_lg = "/"//dsetname2 ! test character buffer larger then needed - CALL h5ltpath_valid_f(file_id, chr_lg, .TRUE., path_valid, errcode) - IF(errcode.LT.0.OR..NOT.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - CALL h5ltpath_valid_f(file_id, chr_lg, .FALSE., path_valid, errcode) - IF(errcode.LT.0.OR..NOT.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - ! Should fail, dataset does not exist - CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .TRUE., path_valid, errcode) - IF(errcode.LT.0.OR.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - CALL h5ltpath_valid_f(file_id, "/"//dsetname2//"junk", .FALSE., path_valid, errcode) - IF(errcode.LT.0.OR.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - ! Create a dangling soft link - CALL h5lcreate_soft_f("/G2", file_id, "/G3", errcode) - - ! Should pass, does not check for dangled link - CALL h5ltpath_valid_f(file_id, "/G3", .FALSE., path_valid, errcode) - IF(.NOT.path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - ! Should fail, dangled link - CALL h5ltpath_valid_f(file_id, "/G2", .TRUE., path_valid, errcode) - IF(path_valid)THEN - PRINT *, 'error in h5ltpath_valid_f' - STOP - ENDIF - - CALL passed() - - - CALL test_begin(' Get dataset dimensions/info ') - - !------------------------------------------------------------------------- - ! h5ltget_dataset_ndims_f - !------------------------------------------------------------------------- - - CALL h5ltget_dataset_ndims_f(file_id, dsetname4, rankr, errcode) - IF ( rankr .NE. rank ) THEN - PRINT *, 'h5ltget_dataset_ndims_f return error' - STOP - ENDIF - - - !------------------------------------------------------------------------- - ! test h5ltfind_dataset_f function - !------------------------------------------------------------------------- - - - has = h5ltfind_dataset_f(file_id,dsetname4) - IF ( has .NE. 1 ) THEN - PRINT *, 'h5ltfind_dataset_f return error' - STOP - ENDIF - - !------------------------------------------------------------------------- - ! test h5ltget_dataset_info_f function - !------------------------------------------------------------------------- - - - CALL h5ltget_dataset_info_f(file_id,dsetname4,dimsr,type_class,type_size,errcode ) - - ! - ! compare dimensions - ! - DO i = 1, rank - IF ( dimsr(i) .NE. dims(i) ) THEN - PRINT *, 'dimensions differ ' - STOP - ENDIF - END DO - - IF ( type_class .NE. 1 ) THEN ! H5T_FLOAT - PRINT *, 'wrong type class ' - STOP - ENDIF - - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, errcode) - ! - ! Close FORTRAN predefined datatypes. - ! - CALL h5close_f(errcode) - - CALL passed() - ! - ! end function. - ! -END SUBROUTINE test_datasets - - - -!------------------------------------------------------------------------- -! test_attributes -!------------------------------------------------------------------------- - -SUBROUTINE test_attributes() - - USE H5LT ! module of H5LT - USE HDF5 ! module of HDF5 library - - IMPLICIT NONE - - CHARACTER(len=9), PARAMETER :: filename = "dsetf5.h5"! File name - CHARACTER(len=9), PARAMETER :: filename1 ="tattr.h5" ! C written attribute file - INTEGER(HID_T) :: file_id ! File identifier -! INTEGER(HID_T) :: file_id1 - INTEGER, PARAMETER :: DIM1 = 10 ! Dimension of array - CHARACTER(LEN=5), PARAMETER :: attrname1 = "attr1" ! Attribute name - CHARACTER(LEN=5), PARAMETER :: attrname2 = "attr2" ! Attribute name - CHARACTER(LEN=5), PARAMETER :: attrname3 = "attr3" ! Attribute name - CHARACTER(LEN=5), PARAMETER :: attrname4 = "attr4" ! Attribute name - CHARACTER(LEN=5), PARAMETER :: attrname5 = "attr5" ! Attribute name - CHARACTER(LEN=8), PARAMETER :: buf1 = "mystring" ! Data buffer - CHARACTER(LEN=16), PARAMETER :: buf_c = "string attribute" - CHARACTER(LEN=8) :: bufr1 ! Data buffer - CHARACTER(LEN=10) :: bufr1_lg ! Data buffer -! CHARACTER(LEN=16) :: bufr_c ! Data buffer -! CHARACTER(LEN=18) :: bufr_c_lg ! Data buffer - INTEGER, DIMENSION(DIM1) :: buf2 ! Data buffer - INTEGER, DIMENSION(DIM1) :: bufr2 ! Data buffer - REAL, DIMENSION(DIM1) :: buf3 ! Data buffer - REAL, DIMENSION(DIM1) :: bufr3 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1) :: buf4 ! Data buffer - DOUBLE PRECISION, DIMENSION(DIM1) :: bufr4 ! Data buffer - INTEGER :: errcode ! Error flag - INTEGER :: i, n ! general purpose integer - INTEGER(SIZE_T) size ! size of attribute array - INTEGER :: rankr ! rank - INTEGER(HSIZE_T), DIMENSION(1) :: dimsr ! attribute dimensions - INTEGER :: type_class - INTEGER(SIZE_T) :: type_size - INTEGER(HSIZE_T), DIMENSION(1) :: dims = (/DIM1/) ! Dataset dimensions - INTEGER :: rank = 1 ! Dataset rank - CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name - INTEGER, DIMENSION(DIM1) :: buf ! Data buffer - - - ! - ! Initialize FORTRAN predefined datatypes. - ! - CALL h5open_f(errcode) - ! - ! Create a new file using default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - ! - ! make a dataset. - ! - CALL h5ltmake_dataset_int_f(file_id, dsetname1, rank, dims, buf, errcode) - - ! - ! Initialize the data array. - ! - size = DIM1 - n = 1 - DO i = 1, DIM1 - buf2(i) = n - buf3(i) = n - buf4(i) = n - n = n + 1 - END DO - - - !------------------------------------------------------------------------- - ! int - !------------------------------------------------------------------------- - - CALL test_begin(' Set/Get attributes int ') - - - ! - ! write attribute. - ! - CALL h5ltset_attribute_int_f(file_id,dsetname1,attrname2,buf2,size,errcode) - - ! - ! read attribute. - ! - CALL h5ltget_attribute_int_f(file_id,dsetname1,attrname2,bufr2,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf2(i) .NE. bufr2(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr2(i), ' and ', buf2(i) - STOP - ENDIF - END DO - - CALL passed() - - !------------------------------------------------------------------------- - ! float - !------------------------------------------------------------------------- - - CALL test_begin(' Set/Get attributes float ') - - - ! - ! write attribute. - ! - CALL h5ltset_attribute_float_f(file_id,dsetname1,attrname3,buf3,size,errcode) - ! - ! read attribute. - ! - CALL h5ltget_attribute_float_f(file_id,dsetname1,attrname3,bufr3,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf3(i) .NE. bufr3(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr3(i), ' and ', buf3(i) - STOP - ENDIF - END DO - - CALL passed() - - !------------------------------------------------------------------------- - ! double - !------------------------------------------------------------------------- - - CALL test_begin(' Set/Get attributes double ') - - ! - ! write attribute. - ! - CALL h5ltset_attribute_double_f(file_id,dsetname1,attrname4,buf4,size,errcode) - - ! - ! read attribute. - ! - CALL h5ltget_attribute_double_f(file_id,dsetname1,attrname4,bufr4,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, DIM1 - IF ( buf4(i) .NE. bufr4(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufr4(i), ' and ', buf4(i) - STOP - ENDIF - END DO - - CALL passed() - - !------------------------------------------------------------------------- - ! string - !------------------------------------------------------------------------- - - CALL test_begin(' Set/Get attributes string ') - - ! - ! write attribute. - ! - CALL h5ltset_attribute_string_f(file_id,dsetname1,attrname5,buf1,errcode) - - ! - ! read attribute into a fortran character buf that is the same size as buf1. - ! - CALL h5ltget_attribute_string_f(file_id,dsetname1,attrname5,bufr1,errcode) - - ! - ! compare read and write buffers. - ! - IF ( buf1 .NE. bufr1 ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, buf1, ' and ', bufr1 - STOP - ENDIF - - ! - ! read attribute into a fortran character buf that is larger then buf1. - ! - CALL h5ltget_attribute_string_f(file_id,dsetname1,attrname5,bufr1_lg,errcode) - - ! - ! compare read and write buffers, make sure C NULL character was removed. - ! - IF ( buf1(1:8) .NE. bufr1_lg(1:8) .AND. bufr1_lg(9:10) .NE. ' ' ) THEN - PRINT *, 'larger read buffer differs from write buffer' - PRINT *, buf1, ' and ', bufr1_lg - STOP - ENDIF - - ! - ! ** Test reading a string that was created with a C program ** - ! - -!!$ CALL h5fopen_f(filename1, H5F_ACC_RDONLY_F, file_id1, errcode) -!!$ -!!$ CALL h5ltget_attribute_string_f(file_id1, "/", "attr5", bufr_c, errcode) -!!$ ! -!!$ ! compare read and write buffers. -!!$ ! -!!$ IF ( bufr_c .NE. buf_c ) THEN -!!$ PRINT *, 'read buffer differs from write buffer' -!!$ PRINT *, bufr1, ' and ', buf_c -!!$ STOP -!!$ ENDIF -!!$ ! -!!$ ! read attribute into a fortran character buf that is larger then buf_c. -!!$ ! -!!$ CALL h5ltget_attribute_string_f(file_id1, "/", "attr5", bufr_c_lg, errcode) -!!$ -!!$ ! -!!$ ! compare read and write buffers, make sure C NULL character was removed. -!!$ ! -!!$ IF ( buf_c(1:16) .NE. bufr_c_lg(1:16) .AND. bufr_c_lg(17:18) .NE. ' ' ) THEN -!!$ PRINT *, 'larger read buffer differs from write buffer' -!!$ PRINT *, buf_c, ' and ', bufr_c_lg -!!$ STOP -!!$ ENDIF - -!!$ CALL h5fclose_f(file_id1, errcode) - - CALL passed() - - !------------------------------------------------------------------------- - ! get attribute rank - !------------------------------------------------------------------------- - - CALL test_begin(' Get attribute rank/info ') - - - CALL h5ltget_attribute_ndims_f(file_id,dsetname1,attrname2,rankr,errcode) - - IF ( rankr .NE. 1 ) THEN - PRINT *, 'h5ltget_attribute_ndims_f return error' - STOP - ENDIF - - - CALL h5ltget_attribute_info_f(file_id,dsetname1,attrname2,dimsr,type_class,type_size,errcode) - - ! - ! compare dimensions - ! - DO i = 1, rank - IF ( dimsr(i) .NE. dims(i) ) THEN - PRINT *, 'dimensions differ ' - STOP - ENDIF - END DO - - - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, errcode) - ! - ! Close FORTRAN predefined datatypes. - ! - CALL h5close_f(errcode) - - CALL passed() - ! - ! end function. - ! -END SUBROUTINE test_attributes - - - - - - -!------------------------------------------------------------------------- -! test_begin -!------------------------------------------------------------------------- - -SUBROUTINE test_begin(string) - CHARACTER(LEN=*), INTENT(IN) :: string - WRITE(*, fmt = '(14a)', advance = 'no') string - WRITE(*, fmt = '(40x,a)', advance = 'no') ' ' -END SUBROUTINE test_begin - -!------------------------------------------------------------------------- -! passed -!------------------------------------------------------------------------- - -SUBROUTINE passed() - WRITE(*, fmt = '(6a)') 'PASSED' -END SUBROUTINE passed diff --git a/hl/fortran/test/tsttable.F90 b/hl/fortran/test/tsttable.F90 new file mode 100644 index 0000000..74029a5 --- /dev/null +++ b/hl/fortran/test/tsttable.F90 @@ -0,0 +1,534 @@ +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! Copyright by The HDF Group. * +! Copyright by the Board of Trustees of the University of Illinois. * +! All rights reserved. * +! * +! This file is part of HDF5. The full HDF5 copyright notice, including * +! terms governing use, modification, and redistribution, is contained in * +! the files COPYING and Copyright.html. COPYING can be found at the root * +! of the source code distribution tree; Copyright.html can be found at the * +! root level of an installed copy of the electronic HDF5 document set and * +! is linked from the top-level documents page. It can also be found at * +! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * +! access to either file, you may request a copy from help@hdfgroup.org. * +! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * +! +! +! This file contains the FORTRAN90 tests for H5LT +! +#include + +PROGRAM table_test + + CALL test_table1() + +END PROGRAM table_test + + +!------------------------------------------------------------------------- +! test_table1 +!------------------------------------------------------------------------- + +SUBROUTINE test_table1() + + USE H5TB ! module of H5TB + USE HDF5 ! module of HDF5 library + + IMPLICIT NONE + + CHARACTER(len=8), PARAMETER :: filename = "f1tab.h5" ! File name + CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name + INTEGER(HID_T) :: file_id ! File identifier + INTEGER(HSIZE_T), PARAMETER :: nfields = 4 ! nfields + INTEGER(HSIZE_T), PARAMETER :: nrecords = 5 ! nrecords + CHARACTER(LEN=10),DIMENSION(1:nfields) :: field_names ! field names + INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_offset ! field offset + INTEGER(HID_T), DIMENSION(1:nfields) :: field_types ! field types + INTEGER(HSIZE_T), PARAMETER :: chunk_size = 5 ! chunk size + INTEGER, PARAMETER :: compress = 0 ! compress + INTEGER :: errcode = 0 ! Error flag + INTEGER :: i ! general purpose integer + INTEGER(SIZE_T) :: type_size ! Size of the datatype + INTEGER(SIZE_T) :: type_sizec ! Size of the character datatype + INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype + INTEGER(SIZE_T) :: type_sized ! Size of the double precision datatype + INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype + INTEGER(HID_T) :: type_id_c ! Memory datatype identifier (for character field) + INTEGER(SIZE_T) :: offset ! Member's offset + INTEGER(HSIZE_T) :: start = 0 ! start record + INTEGER, DIMENSION(nrecords) :: bufi ! Data buffer + INTEGER, DIMENSION(nrecords) :: bufir ! Data buffer + REAL, DIMENSION(nrecords) :: bufr ! Data buffer + REAL, DIMENSION(nrecords) :: bufrr ! Data buffer + DOUBLE PRECISION, DIMENSION(nrecords) :: bufd ! Data buffer + DOUBLE PRECISION, DIMENSION(nrecords) :: bufdr ! Data buffer + CHARACTER(LEN=2), DIMENSION(nrecords), PARAMETER :: bufs = (/"AB","CD","EF","GH","IJ"/) ! Data buffer + CHARACTER(LEN=2), DIMENSION(nrecords) :: bufsr ! Data buffer + INTEGER(HSIZE_T) :: nfieldsr ! nfields + INTEGER(HSIZE_T) :: nrecordsr ! nrecords + CHARACTER(LEN=9), DIMENSION(1:nfields) :: field_namesr ! field names + INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_offsetr ! field offset + INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_sizesr ! field sizes + INTEGER(SIZE_T) :: type_sizeout = 0 ! size of the datatype + INTEGER :: maxlen = 0 ! max chararter length of a field name + INTEGER :: Cs_sizeof_double = H5_SIZEOF_DOUBLE ! C's sizeof double + INTEGER :: SIZEOF_X + LOGICAL :: Exclude_double + + ! Find size of DOUBLE PRECISION +#ifdef H5_FORTRAN_HAVE_STORAGE_SIZE + SIZEOF_X = storage_size(bufd(1))/storage_size(c_char_'a') +#else + SIZEOF_X = SIZEOF(bufd(1)) +#endif + + ! If Fortran DOUBLE PRECISION and C DOUBLE sizeofs don't match then disable + ! creating a DOUBLE RECISION field, and instead create a REAL field. This + ! is needed to handle when DOUBLE PRECISION is promoted via a compiler flag. + Exclude_double = .FALSE. + IF(Cs_sizeof_double.NE.SIZEOF_X)THEN + Exclude_double = .TRUE. + ENDIF + + ! + ! Initialize the data arrays. + ! + DO i = 1, nrecords + bufi(i) = i + bufr(i) = i + bufd(i) = i + END DO + + ! + ! Initialize FORTRAN predefined datatypes. + ! + CALL h5open_f(errcode) + + ! + ! Create a new file using default properties. + ! + CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) + + + !------------------------------------------------------------------------- + ! make table + ! initialize the table parameters + !------------------------------------------------------------------------- + + field_names(1) = "field1" + field_names(2) = "field2a" + field_names(3) = "field3ab" + field_names(4) = "field4abc" + + ! + ! calculate total size by calculating sizes of each member + ! + CALL h5tcopy_f(H5T_NATIVE_CHARACTER, type_id_c, errcode) + type_size = 2 + CALL h5tset_size_f(type_id_c, type_size, errcode) + CALL h5tget_size_f(type_id_c, type_sizec, errcode) + CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, errcode) + IF(exclude_double)THEN + CALL h5tget_size_f(H5T_NATIVE_REAL, type_sized, errcode) + ELSE + CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, errcode) + ENDIF + CALL h5tget_size_f(H5T_NATIVE_REAL, type_sizer, errcode) + type_size = type_sizec + type_sizei + type_sized + type_sizer + + ! + ! type ID's + ! + field_types(1) = type_id_c + field_types(2) = H5T_NATIVE_INTEGER + IF(exclude_double)THEN + field_types(3) = H5T_NATIVE_REAL + ELSE + field_types(3) = H5T_NATIVE_DOUBLE + ENDIF + field_types(4) = H5T_NATIVE_REAL + + ! + ! offsets + ! + offset = 0 + field_offset(1) = offset + offset = offset + type_sizec ! Offset of the second memeber is 2 + field_offset(2) = offset + offset = offset + type_sizei ! Offset of the second memeber is 6 + field_offset(3) = offset + offset = offset + type_sized ! Offset of the second memeber is 14 + field_offset(4) = offset + + !------------------------------------------------------------------------- + ! make table + !------------------------------------------------------------------------- + + CALL test_begin(' Make table ') + + CALL h5tbmake_table_f(dsetname1,& + file_id,& + dsetname1,& + nfields,& + nrecords,& + type_size,& + field_names,& + field_offset,& + field_types,& + chunk_size,& + compress,& + errcode ) + + CALL passed() + + + !------------------------------------------------------------------------- + ! write field + !------------------------------------------------------------------------- + + CALL test_begin(' Read/Write field by name ') + + CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(1),start,nrecords,type_sizec,& + bufs,errcode) + + CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(2),start,nrecords,type_sizei,& + bufi,errcode) + IF(exclude_double)THEN + CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& + bufr,errcode) + ELSE + CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& + bufd,errcode) + ENDIF + + CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(4),start,nrecords,type_sizer,& + bufr,errcode) + + !------------------------------------------------------------------------- + ! read field + !------------------------------------------------------------------------- + + ! Read an invalid field, should fail + CALL h5tbread_field_name_f(file_id,dsetname1,'DoesNotExist',start,nrecords,type_sizec,& + bufsr,errcode) + + IF(errcode.GE.0)THEN + PRINT *, 'error in h5tbread_field_name_f' + CALL h5fclose_f(file_id, errcode) + CALL h5close_f(errcode) + STOP + ENDIF + + ! Read a valid field, should pass + CALL h5tbread_field_name_f(file_id,dsetname1,field_names(1),start,nrecords,type_sizec,& + bufsr,errcode) + IF(errcode.LT.0)THEN + PRINT *, 'error in h5tbread_field_name_f' + CALL h5fclose_f(file_id, errcode) + CALL h5close_f(errcode) + STOP + ENDIF + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufsr(i) .NE. bufs(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufsr(i), ' and ', bufs(i) + STOP + ENDIF + END DO + + CALL h5tbread_field_name_f(file_id,dsetname1,field_names(2),start,nrecords,type_sizei,& + bufir,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufir(i) .NE. bufi(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufir(i), ' and ', bufi(i) + STOP + ENDIF + END DO + + IF(exclude_double)THEN + + CALL h5tbread_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& + bufrr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufrr(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufrr(i), ' and ', bufr(i) + STOP + ENDIF + END DO + + ELSE + CALL h5tbread_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& + bufdr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufdr(i) .NE. bufd(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufdr(i), ' and ', bufd(i) + STOP + ENDIF + END DO + ENDIF + + + + CALL h5tbread_field_name_f(file_id,dsetname1,field_names(4),start,nrecords,type_sizer,& + bufrr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufrr(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufrr(i), ' and ', bufr(i) + STOP + ENDIF + END DO + + CALL passed() + + + !------------------------------------------------------------------------- + ! write field + !------------------------------------------------------------------------- + + CALL test_begin(' Read/Write field by index ') + + CALL h5tbwrite_field_index_f(file_id,dsetname1,1,start,nrecords,type_sizec,& + bufs,errcode) + + CALL h5tbwrite_field_index_f(file_id,dsetname1,2,start,nrecords,type_sizei,& + bufi,errcode) + + IF(exclude_double)THEN + CALL h5tbwrite_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& + bufr,errcode) + ELSE + CALL h5tbwrite_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& + bufd,errcode) + ENDIF + + CALL h5tbwrite_field_index_f(file_id,dsetname1,4,start,nrecords,type_sizer,& + bufr,errcode) + + + + !------------------------------------------------------------------------- + ! read field + !------------------------------------------------------------------------- + + CALL h5tbread_field_index_f(file_id,dsetname1,1,start,nrecords,type_sizec,& + bufsr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufsr(i) .NE. bufs(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufsr(i), ' and ', bufs(i) + STOP + ENDIF + END DO + + CALL h5tbread_field_index_f(file_id,dsetname1,2,start,nrecords,type_sizei,& + bufir,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufir(i) .NE. bufi(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufir(i), ' and ', bufi(i) + STOP + ENDIF + END DO + IF(exclude_double)THEN + CALL h5tbread_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& + bufrr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufrr(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufrr(i), ' and ', bufr(i) + STOP + ENDIF + END DO + ELSE + CALL h5tbread_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& + bufdr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufdr(i) .NE. bufd(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufdr(i), ' and ', bufd(i) + STOP + ENDIF + END DO + ENDIF + + CALL h5tbread_field_index_f(file_id,dsetname1,4,start,nrecords,type_sizer,& + bufrr,errcode) + + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufrr(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufrr(i), ' and ', bufr(i) + STOP + ENDIF + END DO + + + CALL passed() + + + !------------------------------------------------------------------------- + ! Insert field + ! we insert a field callsed "field5" with the same type and buffer as field 4 (Real) + !------------------------------------------------------------------------- + + CALL test_begin(' Insert field ') + + CALL h5tbinsert_field_f(file_id,dsetname1,"field5",field_types(4),4,bufr,errcode) + CALL h5tbread_field_index_f(file_id,dsetname1,5,start,nrecords,type_sizer,& + bufrr,errcode) + ! + ! compare read and write buffers. + ! + DO i = 1, nrecords + IF ( bufrr(i) .NE. bufr(i) ) THEN + PRINT *, 'read buffer differs from write buffer' + PRINT *, bufrr(i), ' and ', bufr(i) + STOP + ENDIF + END DO + + + CALL passed() + + !------------------------------------------------------------------------- + ! Delete field + !------------------------------------------------------------------------- + + CALL test_begin(' Delete field ') + + CALL h5tbdelete_field_f(file_id,dsetname1,"field4abc",errcode) + + CALL passed() + + + !------------------------------------------------------------------------- + ! Gets the number of records and fields + !------------------------------------------------------------------------- + + CALL test_begin(' Get table info ') + + CALL h5tbget_table_info_f(file_id,dsetname1,nfieldsr,nrecordsr,errcode ) + + IF ( nfieldsr .NE. nfields .AND. nrecordsr .NE. nrecords ) THEN + PRINT *, 'h5tbget_table_info_f return error' + STOP + ENDIF + + CALL passed() + + !------------------------------------------------------------------------- + ! Get information about fields + !------------------------------------------------------------------------- + + CALL test_begin(' Get fields info ') + + CALL h5tbget_field_info_f(file_id, dsetname1, nfields, field_namesr, field_sizesr,& + field_offsetr, type_sizeout, errcode, maxlen ) + + IF ( errcode.NE.0 ) THEN + WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: RETURN ERROR")') + STOP + ENDIF + + ! "field4abc" was deleted and "field5" was added. + field_names(4) = "field5" + + IF ( maxlen .NE. 8 ) THEN + WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: INCORRECT MAXIMUM CHARACTER LENGTH OF THE FIELD NAMES")') + WRITE(*,'(5X,"RETURNED VALUE = ", I0, ", CORRECT VALUE = ", I0)') maxlen, 8 + STOP + ENDIF + + DO i = 1, nfields + IF ( field_namesr(i) .NE. field_names(i)) THEN + WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: READ/WRITE FIELD NAMES DIFFER")') + WRITE(*,'(27X,A," AND ",A)') TRIM(field_namesr(i)), TRIM(field_names(i)) + STOP + ENDIF + END DO + + CALL passed() + + + !------------------------------------------------------------------------- + ! end + !------------------------------------------------------------------------- + + ! + ! Close the file. + ! + CALL h5fclose_f(file_id, errcode) + + ! + ! Close FORTRAN predefined datatypes. + ! + CALL h5close_f(errcode) + + ! + ! end function. + ! +END SUBROUTINE test_table1 + + +!------------------------------------------------------------------------- +! test_begin +!------------------------------------------------------------------------- + +SUBROUTINE test_begin(string) + CHARACTER(LEN=*), INTENT(IN) :: string + WRITE(*, fmt = '(14a)', advance = 'no') string + WRITE(*, fmt = '(40x,a)', advance = 'no') ' ' +END SUBROUTINE test_begin + +!------------------------------------------------------------------------- +! passed +!------------------------------------------------------------------------- + +SUBROUTINE passed() + WRITE(*, fmt = '(6a)') 'PASSED' +END SUBROUTINE passed + + diff --git a/hl/fortran/test/tsttable.f90 b/hl/fortran/test/tsttable.f90 deleted file mode 100644 index bb88abf..0000000 --- a/hl/fortran/test/tsttable.f90 +++ /dev/null @@ -1,466 +0,0 @@ -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! Copyright by The HDF Group. * -! Copyright by the Board of Trustees of the University of Illinois. * -! All rights reserved. * -! * -! This file is part of HDF5. The full HDF5 copyright notice, including * -! terms governing use, modification, and redistribution, is contained in * -! the files COPYING and Copyright.html. COPYING can be found at the root * -! of the source code distribution tree; Copyright.html can be found at the * -! root level of an installed copy of the electronic HDF5 document set and * -! is linked from the top-level documents page. It can also be found at * -! http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * -! access to either file, you may request a copy from help@hdfgroup.org. * -! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -! -! -! This file contains the FORTRAN90 tests for H5LT -! - -PROGRAM table_test - - CALL test_table1() - - -END PROGRAM table_test - - -!------------------------------------------------------------------------- -! test_table1 -!------------------------------------------------------------------------- - -SUBROUTINE test_table1() - - USE H5TB ! module of H5TB - USE HDF5 ! module of HDF5 library - - IMPLICIT NONE - - CHARACTER(len=8), PARAMETER :: filename = "f1tab.h5" ! File name - CHARACTER(LEN=5), PARAMETER :: dsetname1 = "dset1" ! Dataset name - INTEGER(HID_T) :: file_id ! File identifier - INTEGER(HSIZE_T), PARAMETER :: nfields = 4 ! nfields - INTEGER(HSIZE_T), PARAMETER :: nrecords = 5 ! nrecords - CHARACTER(LEN=10),DIMENSION(1:nfields) :: field_names ! field names - INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_offset ! field offset - INTEGER(HID_T), DIMENSION(1:nfields) :: field_types ! field types - INTEGER(HSIZE_T), PARAMETER :: chunk_size = 5 ! chunk size - INTEGER, PARAMETER :: compress = 0 ! compress - INTEGER :: errcode = 0 ! Error flag - INTEGER :: i ! general purpose integer - INTEGER(SIZE_T) :: type_size ! Size of the datatype - INTEGER(SIZE_T) :: type_sizec ! Size of the character datatype - INTEGER(SIZE_T) :: type_sizei ! Size of the integer datatype - INTEGER(SIZE_T) :: type_sized ! Size of the double precision datatype - INTEGER(SIZE_T) :: type_sizer ! Size of the real datatype - INTEGER(HID_T) :: type_id_c ! Memory datatype identifier (for character field) - INTEGER(SIZE_T) :: offset ! Member's offset - INTEGER(HSIZE_T) :: start = 0 ! start record - INTEGER, DIMENSION(nrecords) :: bufi ! Data buffer - INTEGER, DIMENSION(nrecords) :: bufir ! Data buffer - REAL, DIMENSION(nrecords) :: bufr ! Data buffer - REAL, DIMENSION(nrecords) :: bufrr ! Data buffer - DOUBLE PRECISION, DIMENSION(nrecords) :: bufd ! Data buffer - DOUBLE PRECISION, DIMENSION(nrecords) :: bufdr ! Data buffer - CHARACTER(LEN=2), DIMENSION(nrecords), PARAMETER :: bufs = (/"AB","CD","EF","GH","IJ"/) ! Data buffer - CHARACTER(LEN=2), DIMENSION(nrecords) :: bufsr ! Data buffer - INTEGER(HSIZE_T) :: nfieldsr ! nfields - INTEGER(HSIZE_T) :: nrecordsr ! nrecords - CHARACTER(LEN=9), DIMENSION(1:nfields) :: field_namesr ! field names - INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_offsetr ! field offset - INTEGER(SIZE_T), DIMENSION(1:nfields) :: field_sizesr ! field sizes - INTEGER(SIZE_T) :: type_sizeout = 0 ! size of the datatype - INTEGER :: maxlen = 0 ! max chararter length of a field name - - - ! - ! Initialize the data arrays. - ! - DO i = 1, nrecords - bufi(i) = i - bufr(i) = i - bufd(i) = i - END DO - - ! - ! Initialize FORTRAN predefined datatypes. - ! - CALL h5open_f(errcode) - - ! - ! Create a new file using default properties. - ! - CALL h5fcreate_f(filename, H5F_ACC_TRUNC_F, file_id, errcode) - - - !------------------------------------------------------------------------- - ! make table - ! initialize the table parameters - !------------------------------------------------------------------------- - - field_names(1) = "field1" - field_names(2) = "field2a" - field_names(3) = "field3ab" - field_names(4) = "field4abc" - - ! - ! calculate total size by calculating sizes of each member - ! - CALL h5tcopy_f(H5T_NATIVE_CHARACTER, type_id_c, errcode) - type_size = 2 - CALL h5tset_size_f(type_id_c, type_size, errcode) - CALL h5tget_size_f(type_id_c, type_sizec, errcode) - CALL h5tget_size_f(H5T_NATIVE_INTEGER, type_sizei, errcode) - CALL h5tget_size_f(H5T_NATIVE_DOUBLE, type_sized, errcode) - CALL h5tget_size_f(H5T_NATIVE_REAL, type_sizer, errcode) - type_size = type_sizec + type_sizei + type_sized + type_sizer - - ! - ! type ID's - ! - field_types(1) = type_id_c - field_types(2) = H5T_NATIVE_INTEGER - field_types(3) = H5T_NATIVE_DOUBLE - field_types(4) = H5T_NATIVE_REAL - - ! - ! offsets - ! - offset = 0 - field_offset(1) = offset - offset = offset + type_sizec ! Offset of the second memeber is 2 - field_offset(2) = offset - offset = offset + type_sizei ! Offset of the second memeber is 6 - field_offset(3) = offset - offset = offset + type_sized ! Offset of the second memeber is 14 - field_offset(4) = offset - - !------------------------------------------------------------------------- - ! make table - !------------------------------------------------------------------------- - - CALL test_begin(' Make table ') - - CALL h5tbmake_table_f(dsetname1,& - file_id,& - dsetname1,& - nfields,& - nrecords,& - type_size,& - field_names,& - field_offset,& - field_types,& - chunk_size,& - compress,& - errcode ) - - CALL passed() - - - !------------------------------------------------------------------------- - ! write field - !------------------------------------------------------------------------- - - CALL test_begin(' Read/Write field by name ') - - CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(1),start,nrecords,type_sizec,& - bufs,errcode) - - CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(2),start,nrecords,type_sizei,& - bufi,errcode) - - CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& - bufd,errcode) - - CALL h5tbwrite_field_name_f(file_id,dsetname1,field_names(4),start,nrecords,type_sizer,& - bufr,errcode) - - !------------------------------------------------------------------------- - ! read field - !------------------------------------------------------------------------- - - ! Read an invalid field, should fail - CALL h5tbread_field_name_f(file_id,dsetname1,'DoesNotExist',start,nrecords,type_sizec,& - bufsr,errcode) - - IF(errcode.GE.0)THEN - PRINT *, 'error in h5tbread_field_name_f' - CALL h5fclose_f(file_id, errcode) - CALL h5close_f(errcode) - STOP - ENDIF - - ! Read a valid field, should pass - CALL h5tbread_field_name_f(file_id,dsetname1,field_names(1),start,nrecords,type_sizec,& - bufsr,errcode) - IF(errcode.LT.0)THEN - PRINT *, 'error in h5tbread_field_name_f' - CALL h5fclose_f(file_id, errcode) - CALL h5close_f(errcode) - STOP - ENDIF - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufsr(i) .NE. bufs(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufsr(i), ' and ', bufs(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_name_f(file_id,dsetname1,field_names(2),start,nrecords,type_sizei,& - bufir,errcode) - - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufir(i) .NE. bufi(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufir(i), ' and ', bufi(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_name_f(file_id,dsetname1,field_names(3),start,nrecords,type_sized,& - bufdr,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufdr(i) .NE. bufd(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufdr(i), ' and ', bufd(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_name_f(file_id,dsetname1,field_names(4),start,nrecords,type_sizer,& - bufrr,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufrr(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufrr(i), ' and ', bufr(i) - STOP - ENDIF - END DO - - - CALL passed() - - !------------------------------------------------------------------------- - ! write field - !------------------------------------------------------------------------- - - CALL test_begin(' Read/Write field by index ') - - CALL h5tbwrite_field_index_f(file_id,dsetname1,1,start,nrecords,type_sizec,& - bufs,errcode) - - CALL h5tbwrite_field_index_f(file_id,dsetname1,2,start,nrecords,type_sizei,& - bufi,errcode) - - CALL h5tbwrite_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& - bufd,errcode) - - CALL h5tbwrite_field_index_f(file_id,dsetname1,4,start,nrecords,type_sizer,& - bufr,errcode) - - - - !------------------------------------------------------------------------- - ! read field - !------------------------------------------------------------------------- - - CALL h5tbread_field_index_f(file_id,dsetname1,1,start,nrecords,type_sizec,& - bufsr,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufsr(i) .NE. bufs(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufsr(i), ' and ', bufs(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_index_f(file_id,dsetname1,2,start,nrecords,type_sizei,& - bufir,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufir(i) .NE. bufi(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufir(i), ' and ', bufi(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_index_f(file_id,dsetname1,3,start,nrecords,type_sized,& - bufdr,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufdr(i) .NE. bufd(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufdr(i), ' and ', bufd(i) - STOP - ENDIF - END DO - - CALL h5tbread_field_index_f(file_id,dsetname1,4,start,nrecords,type_sizer,& - bufrr,errcode) - - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufrr(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufrr(i), ' and ', bufr(i) - STOP - ENDIF - END DO - - - CALL passed() - - - !------------------------------------------------------------------------- - ! Insert field - ! we insert a field callsed "field5" with the same type and buffer as field 4 (Real) - !------------------------------------------------------------------------- - - CALL test_begin(' Insert field ') - - CALL h5tbinsert_field_f(file_id,dsetname1,"field5",field_types(4),4,bufr,errcode) - CALL h5tbread_field_index_f(file_id,dsetname1,5,start,nrecords,type_sizer,& - bufrr,errcode) - ! - ! compare read and write buffers. - ! - DO i = 1, nrecords - IF ( bufrr(i) .NE. bufr(i) ) THEN - PRINT *, 'read buffer differs from write buffer' - PRINT *, bufrr(i), ' and ', bufr(i) - STOP - ENDIF - END DO - - - CALL passed() - - !------------------------------------------------------------------------- - ! Delete field - !------------------------------------------------------------------------- - - CALL test_begin(' Delete field ') - - CALL h5tbdelete_field_f(file_id,dsetname1,"field4abc",errcode) - - CALL passed() - - - !------------------------------------------------------------------------- - ! Gets the number of records and fields - !------------------------------------------------------------------------- - - CALL test_begin(' Get table info ') - - CALL h5tbget_table_info_f(file_id,dsetname1,nfieldsr,nrecordsr,errcode ) - - IF ( nfieldsr .NE. nfields .AND. nrecordsr .NE. nrecords ) THEN - PRINT *, 'h5tbget_table_info_f return error' - STOP - ENDIF - - CALL passed() - - !------------------------------------------------------------------------- - ! Get information about fields - !------------------------------------------------------------------------- - - CALL test_begin(' Get fields info ') - - CALL h5tbget_field_info_f(file_id, dsetname1, nfields, field_namesr, field_sizesr,& - field_offsetr, type_sizeout, errcode, maxlen ) - - IF ( errcode.NE.0 ) THEN - WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: RETURN ERROR")') - STOP - ENDIF - - ! "field4abc" was deleted and "field5" was added. - field_names(4) = "field5" - - IF ( maxlen .NE. 8 ) THEN - WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: INCORRECT MAXIMUM CHARACTER LENGTH OF THE FIELD NAMES")') - WRITE(*,'(5X,"RETURNED VALUE = ", I0, ", CORRECT VALUE = ", I0)') maxlen, 8 - STOP - ENDIF - - DO i = 1, nfields - IF ( field_namesr(i) .NE. field_names(i)) THEN - WRITE(*,'(/,5X,"H5TBGET_FIELD_INFO_F: READ/WRITE FIELD NAMES DIFFER")') - WRITE(*,'(27X,A," AND ",A)') TRIM(field_namesr(i)), TRIM(field_names(i)) - STOP - ENDIF - END DO - - CALL passed() - - - !------------------------------------------------------------------------- - ! end - !------------------------------------------------------------------------- - - ! - ! Close the file. - ! - CALL h5fclose_f(file_id, errcode) - - ! - ! Close FORTRAN predefined datatypes. - ! - CALL h5close_f(errcode) - - ! - ! end function. - ! -END SUBROUTINE test_table1 - - -!------------------------------------------------------------------------- -! test_begin -!------------------------------------------------------------------------- - -SUBROUTINE test_begin(string) - CHARACTER(LEN=*), INTENT(IN) :: string - WRITE(*, fmt = '(14a)', advance = 'no') string - WRITE(*, fmt = '(40x,a)', advance = 'no') ' ' -END SUBROUTINE test_begin - -!------------------------------------------------------------------------- -! passed -!------------------------------------------------------------------------- - -SUBROUTINE passed() - WRITE(*, fmt = '(6a)') 'PASSED' -END SUBROUTINE passed - - diff --git a/hl/src/Makefile.in b/hl/src/Makefile.in index b35d970..31c83cc 100644 --- a/hl/src/Makefile.in +++ b/hl/src/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -165,7 +166,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -450,14 +451,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -467,13 +475,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -515,6 +522,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/test/Makefile.in b/hl/test/Makefile.in index 1e5955a..fbbaf24 100644 --- a/hl/test/Makefile.in +++ b/hl/test/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = H5srcdir_str.h CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = test_lite$(EXEEXT) test_image$(EXEEXT) \ @@ -180,7 +181,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -500,14 +501,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -517,13 +525,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -565,6 +572,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/tools/Makefile.in b/hl/tools/Makefile.in index 324d0c7..19d6b27 100644 --- a/hl/tools/Makefile.in +++ b/hl/tools/Makefile.in @@ -106,7 +106,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -449,14 +450,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -466,13 +474,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -514,6 +521,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/tools/gif2h5/Makefile.in b/hl/tools/gif2h5/Makefile.in index 3da84e1..6ebf126 100644 --- a/hl/tools/gif2h5/Makefile.in +++ b/hl/tools/gif2h5/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = h52giftest.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -150,7 +151,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -463,14 +464,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -480,13 +488,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -528,6 +535,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/hl/tools/h5watch/Makefile.in b/hl/tools/h5watch/Makefile.in index afba745..d7738ca 100644 --- a/hl/tools/h5watch/Makefile.in +++ b/hl/tools/h5watch/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5watch.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -152,7 +153,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -466,14 +467,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -483,13 +491,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -531,6 +538,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/m4/aclocal_fc.m4 b/m4/aclocal_fc.m4 index cda2fee..b7ce048 100644 --- a/m4/aclocal_fc.m4 +++ b/m4/aclocal_fc.m4 @@ -63,6 +63,20 @@ dnl was required" problem when libtool is also used dnl [1] MPICH.org dnl +dnl See if the fortran compiler supports the intrinsic module "ISO_FORTRAN_ENV" + +AC_DEFUN([PAC_PROG_FC_ISO_FORTRAN_ENV],[ + HAVE_ISO_FORTRAN_ENV="no" + AC_MSG_CHECKING([if Fortran compiler supports intrinsic module ISO_FORTRAN_ENV]) + AC_LINK_IFELSE([AC_LANG_SOURCE([ + PROGRAM main + USE, INTRINSIC :: ISO_FORTRAN_ENV + END PROGRAM + ])],[AC_MSG_RESULT([yes]) + HAVE_ISO_FORTRAN_ENV="yes"], + [AC_MSG_RESULT([no])]) +]) + dnl See if the fortran compiler supports the intrinsic function "SIZEOF" AC_DEFUN([PAC_PROG_FC_SIZEOF],[ @@ -111,38 +125,56 @@ AC_DEFUN([PAC_PROG_FC_STORAGE_SIZE],[ ]) -dnl Check to see if -r8 was specified to determine if we need to -dnl compile the DOUBLE PRECISION interfaces. +dnl Check to see C_LONG_DOUBLE is available + +AC_DEFUN([PAC_PROG_FC_HAVE_C_LONG_DOUBLE],[ + HAVE_C_LONG_DOUBLE_FORTRAN="no" + AC_MSG_CHECKING([if Fortran compiler supports intrinsic C_LONG_DOUBLE]) + AC_LINK_IFELSE([AC_LANG_SOURCE([ + PROGRAM main + USE ISO_C_BINDING + REAL(KIND=C_LONG_DOUBLE) :: d + END PROGRAM + ])], [AC_MSG_RESULT([yes]) + HAVE_C_LONG_DOUBLE_FORTRAN="yes"], + [AC_MSG_RESULT([no])]) +]) + +dnl Check if C_LONG_DOUBLE is different from C_DOUBLE -AC_DEFUN([PAC_PROG_FC_DEFAULT_REALisDBLE],[ - FORTRAN_DEFAULT_REALisDBLE="no" - AC_MSG_CHECKING([if Fortran default REAL is DOUBLE PRECISION]) +if test "X$FORTRAN_HAVE_C_LONG_DOUBLE" = "Xyes"; then +AC_DEFUN([PAC_PROG_FC_C_LONG_DOUBLE_EQ_C_DOUBLE],[ + C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="no" + AC_MSG_CHECKING([if Fortran C_LONG_DOUBLE is different from C_DOUBLE]) AC_COMPILE_IFELSE([AC_LANG_SOURCE([ MODULE type_mod + USE ISO_C_BINDING INTERFACE h5t - MODULE PROCEDURE h5t_real - MODULE PROCEDURE h5t_dble + MODULE PROCEDURE h5t_c_double + MODULE PROCEDURE h5t_c_long_double END INTERFACE CONTAINS - SUBROUTINE h5t_real(r) - REAL :: r - END SUBROUTINE h5t_real - SUBROUTINE h5t_dble(d) - DOUBLE PRECISION :: d - END SUBROUTINE h5t_dble + SUBROUTINE h5t_c_double(r) + REAL(KIND=C_DOUBLE) :: r + END SUBROUTINE h5t_c_double + SUBROUTINE h5t_c_long_double(d) + REAL(KIND=C_LONG_DOUBLE) :: d + END SUBROUTINE h5t_c_long_double END MODULE type_mod PROGRAM main + USE ISO_C_BINDING USE type_mod - REAL :: r - DOUBLE PRECISION :: d + REAL(KIND=C_DOUBLE) :: r + REAL(KIND=C_LONG_DOUBLE) :: d CALL h5t(r) CALL h5t(d) END PROGRAM main - ])], [AC_MSG_RESULT([no])], - [AC_MSG_RESULT([yes]) - FORTRAN_DEFAULT_REALisDBLE="yes"]) + ])], [AC_MSG_RESULT([yes]) + C_LONG_DOUBLE_IS_UNIQUE_FORTRAN="yes"], + [AC_MSG_RESULT([no])]) ]) +fi dnl Checking if the compiler supports the required Fortran 2003 features and dnl disable Fortran 2003 if it does not. @@ -152,7 +184,6 @@ AC_DEFUN([PAC_PROG_FC_HAVE_F2003_REQUIREMENTS],[ dnl -------------------------------------------------------------------- dnl Default for FORTRAN 2003 compliant compilers dnl - HAVE_FORTRAN_2003="no" HAVE_F2003_REQUIREMENTS="no" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[ @@ -280,4 +311,280 @@ dnl Try link a simple MPI program. dnl Change to the C language AC_LANG_POP(Fortran) ]) + +dnl ------------------------------------------------------ +dnl Determine the available KINDs for REALs and INTEGERs +dnl ------------------------------------------------------ +dnl +dnl This is a runtime test. +dnl +AC_DEFUN([PAC_FC_AVAIL_KINDS],[ +AC_LANG_PUSH([Fortran]) +rm -f pac_fconftest.out + +AC_RUN_IFELSE([ + AC_LANG_SOURCE([ + PROGRAM main + IMPLICIT NONE + INTEGER :: ik, k, lastkind, max_decimal_prec + INTEGER :: num_rkinds, num_ikinds + num_ikinds = 0 + lastkind=SELECTED_INT_KIND(1) + OPEN(8, FILE='pac_fconftest.out', form='formatted') + ! Find integer KINDs + DO ik=2,36 + k = SELECTED_INT_KIND(ik) + IF (k .NE. lastkind) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1) THEN + num_ikinds = num_ikinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + ! Find real KINDs + num_rkinds = 0 + lastkind=SELECTED_REAL_KIND(1) + max_decimal_prec = 1 + DO ik=2,36 + k = SELECTED_REAL_KIND(ik) + IF (k .NE. lastkind) THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)',ADVANCE='NO') lastkind + lastkind = k + IF(k.GT.0) WRITE(8,'(A)',ADVANCE='NO') ',' + max_decimal_prec = ik + ENDIF + IF (k .LE. 0) EXIT + ENDDO + IF (lastkind.NE.-1)THEN + num_rkinds = num_rkinds + 1 + WRITE(8,'(I0)') lastkind + ELSE + WRITE(8,'()') + ENDIF + WRITE(8,'(I0)') max_decimal_prec + WRITE(8,'(I0)') num_ikinds + WRITE(8,'(I0)') num_rkinds + END + ]) +],[ + if test -s pac_fconftest.out ; then + dnl The output from the above program will be: + dnl -- LINE 1 -- valid integer kinds (comma seperated list) + dnl -- LINE 2 -- valid real kinds (comma seperated list) + dnl -- LINE 3 -- max decimal precision for reals + dnl -- LINE 4 -- number of valid integer kinds + dnl -- LINE 5 -- number of valid real kinds + + pac_validIntKinds="`perl -ne '$. == 1 && print && exit' pac_fconftest.out`" + pac_validRealKinds="`perl -ne '$. == 2 && print && exit' pac_fconftest.out`" + PAC_FC_MAX_REAL_PRECISION="`perl -ne '$. == 3 && print && exit' pac_fconftest.out`" + AC_DEFINE_UNQUOTED([PAC_FC_MAX_REAL_PRECISION], $PAC_FC_MAX_REAL_PRECISION, [Define Fortran Maximum Real Decimal Precision]) + + PAC_FC_ALL_INTEGER_KINDS="{`echo $pac_validIntKinds`}" + PAC_FC_ALL_REAL_KINDS="{`echo $pac_validRealKinds`}" + + H5CONFIG_F_NUM_IKIND="INTEGER, PARAMETER :: num_ikinds = `perl -ne '$. == 4 && print && exit' pac_fconftest.out`" + H5CONFIG_F_IKIND="INTEGER, DIMENSION(1:num_ikinds) :: ikind = (/`echo $pac_validIntKinds`/)" + H5CONFIG_F_NUM_RKIND="INTEGER, PARAMETER :: num_rkinds = `perl -ne '$. == 5 && print && exit' pac_fconftest.out`" + H5CONFIG_F_RKIND="INTEGER, DIMENSION(1:num_rkinds) :: rkind = (/`echo $pac_validRealKinds`/)" + + AC_DEFINE_UNQUOTED([H5CONFIG_F_NUM_RKIND], $H5CONFIG_F_NUM_RKIND, [Define number of valid Fortran REAL KINDs]) + AC_DEFINE_UNQUOTED([H5CONFIG_F_NUM_IKIND], $H5CONFIG_F_NUM_IKIND, [Define number of valid Fortran INTEGER KINDs]) + AC_DEFINE_UNQUOTED([H5CONFIG_F_RKIND], $H5CONFIG_F_RKIND, [Define valid Fortran REAL KINDs]) + AC_DEFINE_UNQUOTED([H5CONFIG_F_IKIND], $H5CONFIG_F_IKIND, [Define valid Fortran INTEGER KINDs]) + + AC_MSG_CHECKING([for Fortran INTEGER KINDs]) + AC_MSG_RESULT([$PAC_FC_ALL_INTEGER_KINDS]) + AC_MSG_CHECKING([for Fortran REAL KINDs]) + AC_MSG_RESULT([$PAC_FC_ALL_REAL_KINDS]) + AC_MSG_CHECKING([for Fortran REALs maximum decimal precision]) + AC_MSG_RESULT([$PAC_FC_MAX_REAL_PRECISION]) + else + AC_MSG_RESULT([Error]) + AC_MSG_WARN([No output from test program!]) + fi + rm -f pac_fconftest.out +],[ + AC_MSG_RESULT([Error]) + AC_MSG_WARN([Failed to run program to determine available KINDs]) +],[]) + +AC_LANG_POP([Fortran]) +]) +AC_DEFUN([PAC_FC_SIZEOF_INT_KINDS],[ +AC_REQUIRE([PAC_FC_AVAIL_KINDS]) +AC_MSG_CHECKING([sizeof of available INTEGER KINDs]) +AC_LANG_PUSH([Fortran]) +pack_int_sizeof="" +rm -f pac_fconftest.out + +for kind in `echo $pac_validIntKinds | perl -pe 's/,/ /g'`; do + AC_LANG_CONFTEST([ + AC_LANG_SOURCE([ + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER (KIND=$kind) a + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,'(I0)') $FC_SIZEOF_A + CLOSE(8) + END + ]) + ]) + AC_RUN_IFELSE([],[ + if test -s pac_fconftest.out ; then + sizes="`cat pac_fconftest.out`" + pack_int_sizeof="$pack_int_sizeof $sizes," + else + AC_MSG_WARN([No output from test program!]) + fi + rm -f pac_fconftest.out + ],[ + AC_MSG_WARN([Fortran program fails to build or run!]) + ],[ + pack_int_sizeof="$2" + ]) +done +PAC_FC_ALL_INTEGER_KINDS_SIZEOF="{`echo $pack_int_sizeof | perl -pe 's/,$//' | perl -pe 's/ //g'`}" +AC_MSG_RESULT([$PAC_FC_ALL_INTEGER_KINDS_SIZEOF]) +AC_LANG_POP([Fortran]) +]) + +AC_DEFUN([PAC_FC_SIZEOF_REAL_KINDS],[ +AC_REQUIRE([PAC_FC_AVAIL_KINDS]) +AC_MSG_CHECKING([sizeof of available REAL KINDs]) +AC_LANG_PUSH([Fortran]) +pack_real_sizeof="" +rm -f pac_fconftest.out +for kind in `echo $pac_validRealKinds| perl -pe 's/,/ /g'`; do + AC_LANG_CONFTEST([ + AC_LANG_SOURCE([ + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + REAL (KIND=$kind) :: a + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,'(I0)') $FC_SIZEOF_A + CLOSE(8) + END + ]) + ]) + AC_RUN_IFELSE([],[ + if test -s pac_fconftest.out ; then + sizes="`cat pac_fconftest.out`" + pack_real_sizeof="$pack_real_sizeof $sizes," + else + AC_MSG_WARN([No output from test program!]) + fi + rm -f pac_fconftest.out + ],[ + AC_MSG_WARN([Fortran program fails to build or run!]) + ],[ + pack_real_sizeof="$2" + ]) +done +PAC_FC_ALL_REAL_KINDS_SIZEOF="{`echo $pack_real_sizeof | perl -pe 's/,$//' | perl -pe 's/ //g'`}" +AC_MSG_RESULT([$PAC_FC_ALL_REAL_KINDS_SIZEOF]) +AC_LANG_POP([Fortran]) +]) + +AC_DEFUN([PAC_FC_NATIVE_INTEGER],[ +AC_REQUIRE([PAC_FC_AVAIL_KINDS]) +AC_MSG_CHECKING([sizeof of native KINDS]) +AC_LANG_PUSH([Fortran]) +pack_int_sizeof="" +rm -f pac_fconftest.out + AC_LANG_CONFTEST([ + AC_LANG_SOURCE([ + PROGRAM main + USE ISO_C_BINDING + IMPLICIT NONE + INTEGER a + REAL b + DOUBLE PRECISION c + OPEN(8, FILE='pac_fconftest.out', FORM='formatted') + WRITE(8,*) $FC_SIZEOF_A + WRITE(8,*) kind(a) + WRITE(8,*) $FC_SIZEOF_B + WRITE(8,*) kind(b) + WRITE(8,*) $FC_SIZEOF_C + WRITE(8,*) kind(c) + CLOSE(8) + END + ]) + ]) + AC_RUN_IFELSE([],[ + if test -s pac_fconftest.out ; then + PAC_FORTRAN_NATIVE_INTEGER_KIND="`perl -ne '$. == 1 && print && exit' pac_fconftest.out`" + PAC_FORTRAN_NATIVE_INTEGER_SIZEOF="`perl -ne '$. == 2 && print && exit' pac_fconftest.out`" + PAC_FORTRAN_NATIVE_REAL_KIND="`perl -ne '$. == 3 && print && exit' pac_fconftest.out`" + PAC_FORTRAN_NATIVE_REAL_SIZEOF="`perl -ne '$. == 4 && print && exit' pac_fconftest.out`" + PAC_FORTRAN_NATIVE_DOUBLE_KIND="`perl -ne '$. == 5 && print && exit' pac_fconftest.out`" + PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF="`perl -ne '$. == 6 && print && exit' pac_fconftest.out`" + else + AC_MSG_WARN([No output from test program!]) + fi + rm -f pac_fconftest.out + ],[ + AC_MSG_WARN([Fortran program fails to build or run!]) + ],[ + pack_int_sizeof="$2" + ]) +AC_MSG_RESULT([$pack_int_sizeof]) +AC_LANG_POP([Fortran]) +]) + +AC_DEFUN([PAC_FC_LDBL_DIG],[ +AC_MSG_CHECKING([maximum decimal precision for C]) +rm -f pac_Cconftest.out + AC_LANG_CONFTEST([ + AC_LANG_PROGRAM([ + #include + #include + #define CHECK_FLOAT128 $ac_cv_sizeof___float128 + #if CHECK_FLOAT128!=0 + # if $HAVE_QUADMATH!=0 + #include + # endif + # ifdef FLT128_DIG + #define C_FLT128_DIG FLT128_DIG + # else + #define C_FLT128_DIG 0 + # endif + #else + #define C_FLT128_DIG 0 + #endif + #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + #define C_LDBL_DIG DECIMAL_DIG + #else + #define C_LDBL_DIG LDBL_DIG + #endif + ],[[ + FILE * pFile; + pFile = fopen("pac_Cconftest.out","w"); + fprintf(pFile, "%d\n%d\n", C_LDBL_DIG, C_FLT128_DIG); + ]]) + ]) + AC_RUN_IFELSE([],[ + if test -s pac_Cconftest.out ; then + LDBL_DIG="`perl -ne '$. == 1 && print && exit' pac_Cconftest.out`" + FLT128_DIG="`perl -ne '$. == 2 && print && exit' pac_Cconftest.out`" + else + AC_MSG_WARN([No output from test program!]) + fi + rm -f pac_Cconftest.out + ],[ + AC_MSG_ERROR([C program fails to build or run!]) + ],[]) +]) + + diff --git a/src/H5config.h.in b/src/H5config.h.in index 0eba7a3..cca6e34 100644 --- a/src/H5config.h.in +++ b/src/H5config.h.in @@ -30,6 +30,39 @@ /* As FC_FUNC, but for C identifiers containing underscores. */ #undef FC_FUNC_ +/* Define if Fortran C_LONG_DOUBLE is different from C_DOUBLE */ +#undef FORTRAN_C_LONG_DOUBLE_IS_UNIQUE + +/* Define if we have Fortran C_LONG_DOUBLE */ +#undef FORTRAN_HAVE_C_LONG_DOUBLE + +/* Define if we have Fortran intrinsic C_SIZEOF */ +#undef FORTRAN_HAVE_C_SIZEOF + +/* Define if we have Fortran intrinsic SIZEOF */ +#undef FORTRAN_HAVE_SIZEOF + +/* Define if we have Fortran intrinsic STORAGE_SIZE */ +#undef FORTRAN_HAVE_STORAGE_SIZE + +/* Determine the size of C long double */ +#undef FORTRAN_SIZEOF_LONG_DOUBLE + +/* Define valid Fortran INTEGER KINDs */ +#undef H5CONFIG_F_IKIND + +/* Define number of valid Fortran INTEGER KINDs */ +#undef H5CONFIG_F_NUM_IKIND + +/* Define number of valid Fortran REAL KINDs */ +#undef H5CONFIG_F_NUM_RKIND + +/* Define valid Fortran REAL KINDs */ +#undef H5CONFIG_F_RKIND + +/* Define valid Fortran REAL KINDs Sizeof */ +#undef H5CONFIG_F_RKIND_SIZEOF + /* Define to 1 if you have the `alarm' function. */ #undef HAVE_ALARM @@ -85,6 +118,9 @@ /* Define if support for szip filter is enabled */ #undef HAVE_FILTER_SZIP +/* Determine if __float128 is available */ +#undef HAVE_FLOAT128 + /* Define to 1 if you have the `flock' function. */ #undef HAVE_FLOCK @@ -118,6 +154,9 @@ /* Define if the compiler understands the __FUNCTION__ keyword */ #undef HAVE_FUNCTION +/* Determine if INTEGER*16 is available */ +#undef HAVE_Fortran_INTEGER_SIZEOF_16 + /* Define to 1 if you have the `GetConsoleScreenBufferInfo' function. */ #undef HAVE_GETCONSOLESCREENBUFFERINFO @@ -209,6 +248,9 @@ /* Define to 1 if you have the header file. */ #undef HAVE_PTHREAD_H +/* Define to 1 if you have the header file. */ +#undef HAVE_QUADMATH_H + /* Define to 1 if you have the `random' function. */ #undef HAVE_RANDOM @@ -409,6 +451,12 @@ /* Define to the version of this package. */ #undef PACKAGE_VERSION +/* Determine the maximum decimal precision in C */ +#undef PAC_C_MAX_REAL_PRECISION + +/* Define Fortran Maximum Real Decimal Precision */ +#undef PAC_FC_MAX_REAL_PRECISION + /* Width for printf() for type `long long' or `__int64', use `ll' */ #undef PRINTF_LL_WIDTH @@ -526,6 +574,12 @@ /* The size of `unsigned', as computed by sizeof. */ #undef SIZEOF_UNSIGNED +/* The size of `_Quad', as computed by sizeof. */ +#undef SIZEOF__QUAD + +/* The size of `__float128', as computed by sizeof. */ +#undef SIZEOF___FLOAT128 + /* The size of `__int64', as computed by sizeof. */ #undef SIZEOF___INT64 diff --git a/src/Makefile.in b/src/Makefile.in index 8bbef8c..ba0ef56 100644 --- a/src/Makefile.in +++ b/src/Makefile.in @@ -114,7 +114,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = H5config.h +CONFIG_HEADER = H5config.h $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = libhdf5.settings CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -231,7 +231,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -516,14 +516,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -533,13 +540,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -581,6 +587,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/src/libhdf5.settings.in b/src/libhdf5.settings.in index 1eed645..2355543 100644 --- a/src/libhdf5.settings.in +++ b/src/libhdf5.settings.in @@ -39,7 +39,6 @@ Languages: ---------- Fortran: @HDF_FORTRAN@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Compiler: @FC_VERSION@ -@BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran 2003 Compiler: @HAVE_FORTRAN_2003@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ Fortran Flags: @FCFLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ H5 Fortran Flags: @H5_FCFLAGS@ @BUILD_FORTRAN_CONDITIONAL_TRUE@ AM Fortran Flags: @AM_FCFLAGS@ diff --git a/test/Makefile.in b/test/Makefile.in index ba2e1ed..5fa26b2 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -130,7 +130,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testcheck_version.sh testerror.sh \ testflushrefresh.sh H5srcdir_str.h testlibinfo.sh \ testlinks_env.sh testswmr.sh test_plugin.sh test_usecases.sh @@ -640,7 +641,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -974,14 +975,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -991,13 +999,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -1039,6 +1046,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/testpar/Makefile.in b/testpar/Makefile.in index dc339cd..5797dfc 100644 --- a/testpar/Makefile.in +++ b/testpar/Makefile.in @@ -108,7 +108,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = t_mpi$(EXEEXT) testphdf5$(EXEEXT) t_cache$(EXEEXT) \ @@ -170,7 +171,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -482,14 +483,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -499,13 +507,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -547,6 +554,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/Makefile.in b/tools/Makefile.in index 727e3c5..3584838 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -106,7 +106,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) @@ -449,14 +450,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -466,13 +474,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -514,6 +521,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in index e128cfe..1b50662 100644 --- a/tools/h5copy/Makefile.in +++ b/tools/h5copy/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5copy.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -143,7 +144,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -457,14 +458,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -474,13 +482,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -522,6 +529,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index c95967d..7b4d121 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5diff.sh testph5diff.sh CONFIG_CLEAN_VPATH_FILES = @BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = ph5diff$(EXEEXT) @@ -148,7 +149,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -464,14 +465,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -481,13 +489,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -529,6 +536,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index 7371adf..9865e3a 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -149,7 +150,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -463,14 +464,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -480,13 +488,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -528,6 +535,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5format_convert/Makefile.in b/tools/h5format_convert/Makefile.in index f565cb3..55df63d 100644 --- a/tools/h5format_convert/Makefile.in +++ b/tools/h5format_convert/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5fc.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -148,7 +149,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -462,14 +463,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -479,13 +487,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -527,6 +534,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index 0778fc2..d6e784a 100644 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = h5importtestutil.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -143,7 +144,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -457,14 +458,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -474,13 +482,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -522,6 +529,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index ed8151f..c915437 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -110,7 +110,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5jam.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -157,7 +158,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -469,14 +470,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -486,13 +494,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -534,6 +541,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index c77784e..8fb9822 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -109,7 +109,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5ls.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -137,7 +138,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -449,14 +450,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -466,13 +474,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -514,6 +521,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index 6d1bfd6..c0b6685 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -113,7 +113,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = h5repack.sh h5repack_plugin.sh CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -192,7 +193,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -481,14 +482,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -498,13 +506,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -546,6 +553,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in index 1bbefe9..6bf37f3 100644 --- a/tools/h5stat/Makefile.in +++ b/tools/h5stat/Makefile.in @@ -111,7 +111,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = testh5stat.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" @@ -172,7 +173,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -459,14 +460,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -476,13 +484,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -524,6 +531,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index 0b531b3..fcfb019 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -108,7 +108,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) @@ -135,7 +136,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -446,14 +447,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -463,13 +471,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -511,6 +518,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index 407cad6..f9ea1ed 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -115,7 +115,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = h5cc testh5clear.sh testh5mkgrp.sh \ testh5repart.sh CONFIG_CLEAN_VPATH_FILES = @@ -214,7 +215,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -503,14 +504,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -520,13 +528,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -568,6 +575,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ diff --git a/tools/perform/Makefile.in b/tools/perform/Makefile.in index 325bc4d..4804533 100644 --- a/tools/perform/Makefile.in +++ b/tools/perform/Makefile.in @@ -116,7 +116,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_HEADER = $(top_builddir)/src/H5config.h \ + $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -171,7 +172,7 @@ AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f @@ -488,14 +489,21 @@ F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ -FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ +FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ +FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ +FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ +H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ +H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ +H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ +H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ +H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ @@ -505,13 +513,12 @@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ +HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ @@ -553,6 +560,18 @@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ +PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ +PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ +PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ +PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ +PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ +PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ +PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ +PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ +PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ +PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ +PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ +PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ -- cgit v0.12