From da8917ffa3a0c6a28296840975cb33c22d439d41 Mon Sep 17 00:00:00 2001 From: Allen Byrne Date: Fri, 12 Jun 2009 08:34:44 -0500 Subject: [svn-r17043] Undo the addition of generated files, mistakenly added by lack of attention. --- perform/Makefile | 966 ------------------------------------------- perform/chunk | 148 ------- perform/chunk.chkexe | 0 perform/chunk.chklog | 50 --- perform/chunk.h5 | Bin 4022328 -> 0 bytes perform/h5perf_serial | 148 ------- perform/h5perf_serial.chkexe | 0 perform/h5perf_serial.chklog | 56 --- perform/iopipe | 148 ------- perform/iopipe.chkexe | 0 perform/iopipe.chklog | 24 -- perform/iopipe.h5 | Bin 1002048 -> 0 bytes perform/iopipe.raw | Bin 1000000 -> 0 bytes perform/overhead | 148 ------- perform/overhead.chkexe | 0 perform/overhead.chklog | 15 - perform/perf_meta | 148 ------- perform/perf_meta.chkexe | 0 perform/perf_meta.chklog | 23 -- perform/x-diag-rd.dat | 11 - perform/x-diag-wr.dat | 11 - perform/x-gnuplot | 44 -- perform/x-rowmaj-rd.dat | 11 - perform/x-rowmaj-wr.dat | 11 - perform/zip_perf | 148 ------- perform/zip_perf.chkexe | 0 perform/zip_perf.chklog | 38 -- 27 files changed, 2148 deletions(-) delete mode 100644 perform/Makefile delete mode 100644 perform/chunk delete mode 100644 perform/chunk.chkexe delete mode 100644 perform/chunk.chklog delete mode 100644 perform/chunk.h5 delete mode 100644 perform/h5perf_serial delete mode 100644 perform/h5perf_serial.chkexe delete mode 100644 perform/h5perf_serial.chklog delete mode 100644 perform/iopipe delete mode 100644 perform/iopipe.chkexe delete mode 100644 perform/iopipe.chklog delete mode 100644 perform/iopipe.h5 delete mode 100644 perform/iopipe.raw delete mode 100644 perform/overhead delete mode 100644 perform/overhead.chkexe delete mode 100644 perform/overhead.chklog delete mode 100644 perform/perf_meta delete mode 100644 perform/perf_meta.chkexe delete mode 100644 perform/perf_meta.chklog delete mode 100644 perform/x-diag-rd.dat delete mode 100644 perform/x-diag-wr.dat delete mode 100644 perform/x-gnuplot delete mode 100644 perform/x-rowmaj-rd.dat delete mode 100644 perform/x-rowmaj-wr.dat delete mode 100644 perform/zip_perf delete mode 100644 perform/zip_perf.chkexe delete mode 100644 perform/zip_perf.chklog diff --git a/perform/Makefile b/perform/Makefile deleted file mode 100644 index bc0f5d3..0000000 --- a/perform/Makefile +++ /dev/null @@ -1,966 +0,0 @@ -# Makefile.in generated by automake 1.10.2 from Makefile.am. -# perform/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. -# -# HDF5 Library Performance Makefile(.in) -# - - -pkgdatadir = $(datadir)/hdf5 -pkglibdir = $(libdir)/hdf5 -pkgincludedir = $(includedir)/hdf5 -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-linux-gnu -host_triplet = x86_64-unknown-linux-gnu -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/config/commence.am \ - $(top_srcdir)/config/conclude.am COPYING -bin_PROGRAMS = \ - h5perf_serial$(EXEEXT) -#bin_PROGRAMS = h5perf$(EXEEXT) -check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_4) -TESTS = $(check_PROGRAMS) -subdir = perform -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -#am__EXEEXT_1 = h5perf$(EXEEXT) \ -# perf$(EXEEXT) -#am__EXEEXT_2 = benchpar$(EXEEXT) \ -# mpi-perf$(EXEEXT) -#am__EXEEXT_3 = $(am__EXEEXT_2) -am__EXEEXT_4 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \ - zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \ - $(am__EXEEXT_3) -PROGRAMS = $(bin_PROGRAMS) -benchpar_SOURCES = benchpar.c -benchpar_OBJECTS = benchpar.$(OBJEXT) -benchpar_LDADD = $(LDADD) -benchpar_DEPENDENCIES = $(LIBHDF5) -chunk_SOURCES = chunk.c -chunk_OBJECTS = chunk.$(OBJEXT) -chunk_LDADD = $(LDADD) -chunk_DEPENDENCIES = $(LIBHDF5) -am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT) \ - pio_timer.$(OBJEXT) -h5perf_OBJECTS = $(am_h5perf_OBJECTS) -h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT) \ - sio_timer.$(OBJEXT) -h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS) -h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -iopipe_SOURCES = iopipe.c -iopipe_OBJECTS = iopipe.$(OBJEXT) -iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5) -mpi_perf_SOURCES = mpi-perf.c -mpi_perf_OBJECTS = mpi-perf.$(OBJEXT) -mpi_perf_LDADD = $(LDADD) -mpi_perf_DEPENDENCIES = $(LIBHDF5) -overhead_SOURCES = overhead.c -overhead_OBJECTS = overhead.$(OBJEXT) -overhead_LDADD = $(LDADD) -overhead_DEPENDENCIES = $(LIBHDF5) -perf_SOURCES = perf.c -perf_OBJECTS = perf.$(OBJEXT) -perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5) -perf_meta_SOURCES = perf_meta.c -perf_meta_OBJECTS = perf_meta.$(OBJEXT) -perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5) -zip_perf_SOURCES = zip_perf.c -zip_perf_OBJECTS = zip_perf.$(OBJEXT) -zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -DEFAULT_INCLUDES = -I. -I$(top_builddir)/src -depcomp = $(SHELL) $(top_srcdir)/bin/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \ - $(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \ - perf_meta.c zip_perf.c -DIST_SOURCES = benchpar.c chunk.c $(h5perf_SOURCES) \ - $(h5perf_serial_SOURCES) iopipe.c mpi-perf.c overhead.c perf.c \ - perf_meta.c zip_perf.c -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal -ADD_PARALLEL_FILES = no -AMTAR = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run tar -AM_MAKEFLAGS = -AR = ar - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 -AWK = gawk -BYTESEX = little-endian -CC = gcc -fPIC -CCDEPMODE = depmode=gcc3 -CC_VERSION = /usr/lib64/ccache/gcc -fPIC (gcc-4.3.2) - -# H5_CFLAGS holds flags that should be used as CFLAGS when building hdf5, -# but which shouldn't be exported to h5cc for building other programs. -CFLAGS = -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -CLEARFILEBUF = yes -CODESTACK = no -CONFIG_DATE = Tue Apr 21 10:41:53 CDT 2009 -CONFIG_MODE = production -CONFIG_USER = abyrne@localhost.localdomain -CPP = gcc -fPIC -E -CPPFLAGS = -I/home/abyrne/HDF_Projects/SZIP/szip/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_POSIX_SOURCE -D_BSD_SOURCE -DNDEBUG -UH5_DEBUG_API -CXX = g++ -CXXCPP = g++ -E -CXXDEPMODE = depmode=gcc3 -CXXFLAGS = -CYGPATH_W = echo -DEBUG_PKG = -DEFAULT_API_VERSION = v18 -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DEPRECATED_SYMBOLS = yes -DIRECT_VFD = no -DSYMUTIL = -DUMPBIN = -DYNAMIC_DIRS = -R/home/abyrne/HDF_Projects/SZIP/szip/lib -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /bin/grep -E -EXEEXT = -EXTERNAL_FILTERS = deflate(zlib),szip(encoder) - -# Make sure that these variables are exported to the Makefiles -F9XMODEXT = -F9XMODFLAG = -F9XSUFFIXFLAG = -FC = g95 -FCFLAGS = -FCFLAGS_f90 = -FCLIBS = -FGREP = /bin/grep -F -FILTERS = shuffle,fletcher32,nbit,scaleoffset -FSEARCH_DIRS = -GPFS = no -GREP = /bin/grep -H5_CFLAGS = -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -H5_CPPFLAGS = -DNDEBUG -UH5_DEBUG_API -H5_CXXFLAGS = -H5_FCFLAGS = -H5_LONE_COLON = yes -H5_VERSION = 1.8.2-post13 -HADDR_T = -HAVE_DMALLOC = no -HDF5_HL = yes -HDF5_INTERFACES = c++ -HDF_CXX = yes -HDF_FORTRAN = no -HID_T = -HL = hl -HL_FOR = -HSIZE_T = -HSSIZE_T = -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INSTRUMENT = no -INSTRUMENT_LIBRARY = no -LD = /usr/bin/ld -m elf_x86_64 -LDFLAGS = -L/home/abyrne/HDF_Projects/SZIP/szip/lib -LIBOBJS = -LIBS = -lsz -lz -lm -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LINUX_LFS = yes -LIPO = -LL_PATH = /home/abyrne/HDF_Projects/SZIP/szip/lib -LN_S = ln -s -LTLIBOBJS = -LT_STATIC_EXEC = -MAINT = # -MAKEINFO = ${SHELL} /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/missing --run makeinfo -MKDIR_P = /bin/mkdir -p -MPE = no -MPI_GET_SIZE = -NM = /usr/bin/nm -B -NMEDIT = -OBJDUMP = objdump -OBJECT_NAMELEN_DEFAULT_F = -OBJEXT = o -OTOOL = -OTOOL64 = -PACKAGE = hdf5 -PACKAGE_BUGREPORT = help@hdfgroup.org -PACKAGE_NAME = HDF5 -PACKAGE_STRING = HDF5 1.8.2-post13 -PACKAGE_TARNAME = hdf5 -PACKAGE_VERSION = 1.8.2-post13 -PARALLEL = no -PATH_SEPARATOR = : -PERL = perl -PTHREAD = -RANLIB = ranlib -ROOT = /home/abyrne/HDF_Projects/HDF5-C-1.8 -RUNPARALLEL = -RUNSERIAL = -R_INTEGER = -R_LARGE = -SEARCH = VPATH=$(srcdir) $(top_builddir)/src $(top_srcdir)/src -SED = /bin/sed -SETX = set -x -SET_MAKE = -SHELL = /bin/sh -SIZE_T = -STATIC_EXEC = no -STATIC_SHARED = -STRICT_FORMAT_CHECKS = no -STRIP = strip -TESTPARALLEL = -THREADSAFE = no -TIME = time -TR = /usr/bin/tr -TRACE_API = no -UNAME_INFO = Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux -USE_FILTER_DEFLATE = yes -USE_FILTER_FLETCHER32 = yes -USE_FILTER_NBIT = yes -USE_FILTER_SCALEOFFSET = yes -USE_FILTER_SHUFFLE = yes -USE_FILTER_SZIP = yes -USINGMEMCHECKER = no -VERSION = 1.8.2-post13 -WORDS_BIGENDIAN = no -abs_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform -abs_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8/perform -abs_top_builddir = /home/abyrne/HDF_Projects/HDF5-C-1.8 -abs_top_srcdir = /home/abyrne/HDF_Projects/HDF5-C-1.8 -ac_ct_CC = gcc -fPIC -ac_ct_CXX = -ac_ct_DUMPBIN = -ac_ct_FC = -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-linux-gnu -build_alias = -build_cpu = x86_64 -build_os = linux-gnu -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share - -# Install directories that automake doesn't know about -docdir = $(exec_prefix)/doc -dvidir = ${docdir} -enable_shared = yes -enable_static = yes -exec_prefix = ${prefix} -host = x86_64-unknown-linux-gnu -host_alias = -host_cpu = x86_64 -host_os = linux-gnu -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/abyrne/HDF_Projects/HDF5-C-1.8/bin/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -lt_ECHO = echo -mandir = ${datarootdir}/man -mkdir_p = /bin/mkdir -p -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5 -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target_alias = -top_builddir = .. -top_srcdir = .. - -# Shell commands used in Makefiles -RM = rm -f -CP = cp - -# Some machines need a command to run executables; this is that command -# so that our tests will run. -# We use RUNTESTS instead of RUNSERIAL directly because it may be that -# some tests need to be run with a different command. Older versions -# of the makefiles used the command -# $(LIBTOOL) --mode=execute -# in some directories, for instance. -RUNTESTS = $(RUNSERIAL) - -# Libraries to link to while building -LIBHDF5 = $(top_builddir)/src/libhdf5.la -LIBH5TEST = $(top_builddir)/test/libh5test.la -LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la -LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la -LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la -LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la -LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la -LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la -LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la - -# Scripts used to build examples -# If only shared libraries have been installed, have h5cc build examples with -# shared libraries instead of static libraries -H5CC = $(bindir)/h5cc -H5CC_PP = $(bindir)/h5pcc -H5FC = $(bindir)/h5fc -H5FC_PP = $(bindir)/h5pfc -H5CPP = $(bindir)/h5c++ - -# The trace script; this is used on source files from the C library to -# insert tracing macros. -TRACE = perl $(top_srcdir)/bin/trace - -# .chkexe files are used to mark tests that have run successfully. -# .chklog files are output from those tests. -# *.clog are from the MPE option. -CHECK_CLEANFILES = *.chkexe *.chklog *.clog -INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib -#TEST_PROG_PARA = h5perf perf - -# Some programs are not built or run by default, but can be built by hand or by -# specifying --enable-build-all at configure time. -# Also, some of these programs should only be built in parallel. -#PARA_BUILD_ALL = benchpar mpi-perf -#BUILD_ALL_PROGS = $(PARA_BUILD_ALL) - -# These are the programs that `make all' or `make tests' will build and which -# `make check' will run. List them in the order they should be run. -TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS) -h5perf_SOURCES = pio_perf.c pio_engine.c pio_timer.c -h5perf_serial_SOURCES = sio_perf.c sio_engine.c sio_timer.c - -# These are the files that `make clean' (and derivatives) will remove from -# this directory. -CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out - -# All of the programs depend on the main hdf5 library, and some of them -# depend on test or tools library. -LDADD = $(LIBHDF5) -h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -perf_LDADD = $(LIBH5TEST) $(LIBHDF5) -iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5) -zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5) -perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5) - -# Automake needs to be taught how to build lib, progs, and tests targets. -# These will be filled in automatically for the most part (e.g., -# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and -# EXTRA_TEST variables are supplied to allow the user to force targets to -# be built at certain times. -LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ - $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) - -PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ - $(EXTRA_PROG) - -TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) -TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign perform/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign perform/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: # $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): # $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -benchpar$(EXEEXT): $(benchpar_OBJECTS) $(benchpar_DEPENDENCIES) - @rm -f benchpar$(EXEEXT) - $(LINK) $(benchpar_OBJECTS) $(benchpar_LDADD) $(LIBS) -chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) - @rm -f chunk$(EXEEXT) - $(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS) -h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) - @rm -f h5perf$(EXEEXT) - $(LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS) -h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) - @rm -f h5perf_serial$(EXEEXT) - $(LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS) -iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) - @rm -f iopipe$(EXEEXT) - $(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS) -mpi-perf$(EXEEXT): $(mpi_perf_OBJECTS) $(mpi_perf_DEPENDENCIES) - @rm -f mpi-perf$(EXEEXT) - $(LINK) $(mpi_perf_OBJECTS) $(mpi_perf_LDADD) $(LIBS) -overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) - @rm -f overhead$(EXEEXT) - $(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS) -perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) - @rm -f perf$(EXEEXT) - $(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS) -perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) - @rm -f perf_meta$(EXEEXT) - $(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS) -zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) - @rm -f zip_perf$(EXEEXT) - $(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -include ./$(DEPDIR)/benchpar.Po -include ./$(DEPDIR)/chunk.Po -include ./$(DEPDIR)/iopipe.Po -include ./$(DEPDIR)/mpi-perf.Po -include ./$(DEPDIR)/overhead.Po -include ./$(DEPDIR)/perf.Po -include ./$(DEPDIR)/perf_meta.Po -include ./$(DEPDIR)/pio_engine.Po -include ./$(DEPDIR)/pio_perf.Po -include ./$(DEPDIR)/pio_timer.Po -include ./$(DEPDIR)/sio_engine.Po -include ./$(DEPDIR)/sio_perf.Po -include ./$(DEPDIR)/sio_timer.Po -include ./$(DEPDIR)/zip_perf.Po - -.c.o: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c $< - -.c.obj: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: - $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -# source='$<' object='$@' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile $(PROGRAMS) all-local -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool mostlyclean-local - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \ - clean clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libtool ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - mostlyclean-local pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-binPROGRAMS - - -# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. -# This tells the Makefiles that these targets are not files to be built but -# commands that should be executed even if a file with the same name already -# exists. -.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ - build-tests check-clean check-install check-p check-s check-vfd \ - install-doc lib progs tests uninstall-doc _exec_check-s _test help - -help: - @$(top_srcdir)/bin/makehelp - -# lib/progs/tests targets recurse into subdirectories. build-* targets -# build files in this directory. -build-lib: $(LIB) -build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) - -# General rule for recursive building targets. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., for Fortran type detection) -lib progs tests check-s check-p :: $(BUILT_SOURCES) - @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; - @for d in X $(SUBDIRS); do \ - if test $$d != X && test $$d != .; then \ - (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ - fi; \ - done - -# General rule for recursive cleaning targets. Like the rule above, -# but doesn't require building BUILT_SOURCES. -check-clean :: - @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; - @for d in X $(SUBDIRS); do \ - if test $$d != X && test $$d != .; then \ - (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ - fi; \ - done - -# Tell Automake to build tests when the user types `make all' (this is -# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since -# Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) - -# make install-doc doesn't do anything outside of doc directory, but -# Makefiles should recognize it. -# UPDATE: docs no longer reside in this build tree, so this target -# is depreciated. -install-doc uninstall-doc: - @echo "Nothing to be done." - -# clean up files generated by tests so they can be re-run. -build-check-clean: - $(RM) -rf $(CHECK_CLEANFILES) - -# run check-clean whenever mostlyclean is run -mostlyclean-local: build-check-clean - -# check-install is just a synonym for installcheck -check-install: installcheck - -# Run each test in order, passing $(TEST_FLAGS) to the program. -# Since tests are done in a shell loop, "make -i" does apply inside it. -# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. -# The timestamps give a rough idea how much time the tests use. -# -# Note that targets in TESTS (defined above) will be built when the user -# types 'make tests' or 'make check', but only programs in TEST_PROG, -# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. -check-TESTS: test - -test _test: - @$(MAKE) build-check-s - @$(MAKE) build-check-p - -# Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) - @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ - echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ - fi - @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s - @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ - echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ - fi - -_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) - -# The dummy.chkexe here prevents the target from being -# empty if there are no tests in the current directory. -# $${log} is the log file. -# $${tname} is the name of test. -$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: - @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ - tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.chklog); \ - echo "============================"; \ - if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ - echo "No need to test $${tname} again."; \ - else \ - echo "============================" > $${log}; \ - if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ - else \ - echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - fi; \ - echo "============================" >> $${log}; \ - srcdir="$(srcdir)" \ - $(TIME) $(RUNTESTS) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch $(@:.chkexe_=.chkexe) || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - (cat $${log} && false) || exit 1; \ - echo "" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ - echo "============================" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)"; \ - cat $${log}; \ - fi; \ - fi - -# The dummysh.chkexe here prevents the target from being -# empty if there are no tests in the current directory. -# $${log} is the log file. -# $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: - @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ - cmd=$(@:.chkexe_=);\ - tname=`basename $$cmd`;\ - chkname=`basename $(@:.chkexe_=.chkexe)`;\ - log=`basename $(@:.chkexe_=.chklog)`; \ - echo "============================"; \ - if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ - echo "No need to test $${tname} again."; \ - else \ - echo "============================" > $${log}; \ - if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ - echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ - echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - else \ - echo "Testing $${tname} $(TEST_FLAGS)"; \ - echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - fi; \ - echo "============================" >> $${log}; \ - RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ - srcdir="$(srcdir)" \ - $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch $${chkname} || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - (cat $${log} && false) || exit 1; \ - echo "" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ - echo "============================" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)"; \ - cat $${log}; \ - fi; \ - echo "============================"; \ - fi - -# Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) - @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ - echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ - fi - @if test -n "$(TEST_PROG_PARA)"; then \ - echo "**** Hint ****"; \ - echo "Parallel test files reside in the current directory" \ - "by default."; \ - echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ - echo " HDF5_PARAPREFIX=/PFS/user/me"; \ - echo " export HDF5_PARAPREFIX"; \ - echo " make check"; \ - echo "**** end of Hint ****"; \ - fi - @for test in $(TEST_PROG_PARA) dummy; do \ - if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNTESTS="$(RUNPARALLEL)" || exit 1; \ - fi; \ - done - @for test in $(TEST_SCRIPT_PARA) dummy; do \ - if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ - fi; \ - done - @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ - echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ - fi - -# Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) - @for vfd in $(VFD_LIST) dummy; do \ - if test $$vfd != dummy; then \ - echo "============================"; \ - echo "Testing Virtual File Driver $$vfd"; \ - echo "============================"; \ - $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ - HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ - fi; \ - done -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/perform/chunk b/perform/chunk deleted file mode 100644 index e605d08..0000000 --- a/perform/chunk +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# chunk - temporary wrapper script for .libs/chunk -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The chunk program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file chunk.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'chunk' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/chunk.chkexe b/perform/chunk.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/chunk.chklog b/perform/chunk.chklog deleted file mode 100644 index 875bc00..0000000 --- a/perform/chunk.chklog +++ /dev/null @@ -1,50 +0,0 @@ -============================ - chunk Test Log -============================ -Test CacheSz ChunkSz Effic ---------- -------- -------- -------- -Rowmaj-rd 25 0.50 1.00 -Rowmaj-rd 25 1.00 1.00 -Rowmaj-rd 25 1.50 0.75 -Rowmaj-rd 25 2.00 1.00 -Rowmaj-rd 25 2.50 0.83 -Rowmaj-rd 25 3.00 1.00 -Rowmaj-rd 25 3.50 0.87 -Rowmaj-rd 25 4.00 1.00 -Rowmaj-rd 25 4.50 0.91 -Rowmaj-rd 25 5.00 1.00 -Rowmaj-wr 25 0.50 0.50 -Rowmaj-wr 25 1.00 1.00 -Rowmaj-wr 25 1.50 0.45 -Rowmaj-wr 25 2.00 1.00 -Rowmaj-wr 25 2.50 0.57 -Rowmaj-wr 25 3.00 1.00 -Rowmaj-wr 25 3.50 0.63 -Rowmaj-wr 25 4.00 1.00 -Rowmaj-wr 25 4.50 0.72 -Rowmaj-wr 25 5.00 1.00 -Diag-rd 25 0.50 0.26 -Diag-rd 25 1.00 0.51 -Diag-rd 25 1.50 0.62 -Diag-rd 25 2.00 1.00 -Diag-rd 25 2.50 0.72 -Diag-rd 25 3.00 0.80 -Diag-rd 25 3.50 0.78 -Diag-rd 25 4.00 1.00 -Diag-rd 25 4.50 0.84 -Diag-rd 25 5.00 0.89 -Diag-wr 25 0.50 0.13 -Diag-wr 25 1.00 0.26 -Diag-wr 25 1.50 0.31 -Diag-wr 25 2.00 1.00 -Diag-wr 25 2.50 0.41 -Diag-wr 25 3.00 0.53 -Diag-wr 25 3.50 0.49 -Diag-wr 25 4.00 1.00 -Diag-wr 25 4.50 0.58 -Diag-wr 25 5.00 0.69 -0.31user 0.12system 0:00.46elapsed 92%CPU (0avgtext+0avgdata 0maxresident)k -16inputs+7952outputs (0major+9524minor)pagefaults 0swaps - -Finished testing chunk -============================ diff --git a/perform/chunk.h5 b/perform/chunk.h5 deleted file mode 100644 index 26ed19f..0000000 Binary files a/perform/chunk.h5 and /dev/null differ diff --git a/perform/h5perf_serial b/perform/h5perf_serial deleted file mode 100644 index 06329d0..0000000 --- a/perform/h5perf_serial +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# h5perf_serial - temporary wrapper script for .libs/h5perf_serial -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The h5perf_serial program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file sio_perf.o sio_engine.o sio_timer.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'h5perf_serial' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/h5perf_serial.chkexe b/perform/h5perf_serial.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/h5perf_serial.chklog b/perform/h5perf_serial.chklog deleted file mode 100644 index d1bef16..0000000 --- a/perform/h5perf_serial.chklog +++ /dev/null @@ -1,56 +0,0 @@ -============================ - h5perf_serial Test Log -============================ -HDF5 Library: Version 1.8.2-post13 -==== Parameters ==== -IO API=posix hdf5 -Number of iterations=1 -Dataset size=100 200 -Transfer buffer size=10 20 -Dimension access order=1 2 -HDF5 data storage method=Contiguous -HDF5 file driver=sec2 -Env HDF5_PREFIX=not set -==== End of Parameters ==== - -Transfer Buffer Size (bytes): 200 -File Size(MB): 0.02 - IO API = POSIX - Write (1 iteration(s)): - Maximum Throughput: 7.20 MB/s - Average Throughput: 7.20 MB/s - Minimum Throughput: 7.20 MB/s - Write Open-Close (1 iteration(s)): - Maximum Throughput: 7.09 MB/s - Average Throughput: 7.09 MB/s - Minimum Throughput: 7.09 MB/s - Read (1 iteration(s)): - Maximum Throughput: 18.81 MB/s - Average Throughput: 18.81 MB/s - Minimum Throughput: 18.81 MB/s - Read Open-Close (1 iteration(s)): - Maximum Throughput: 18.68 MB/s - Average Throughput: 18.68 MB/s - Minimum Throughput: 18.68 MB/s - IO API = HDF5 - Write (1 iteration(s)): - Maximum Throughput: 18.13 MB/s - Average Throughput: 18.13 MB/s - Minimum Throughput: 18.13 MB/s - Write Open-Close (1 iteration(s)): - Maximum Throughput: 5.67 MB/s - Average Throughput: 5.67 MB/s - Minimum Throughput: 5.67 MB/s - Read (1 iteration(s)): - Maximum Throughput: 30.72 MB/s - Average Throughput: 30.72 MB/s - Minimum Throughput: 30.72 MB/s - Read Open-Close (1 iteration(s)): - Maximum Throughput: 13.86 MB/s - Average Throughput: 13.86 MB/s - Minimum Throughput: 13.86 MB/s -0.03user 0.01system 0:00.10elapsed 50%CPU (0avgtext+0avgdata 0maxresident)k -88inputs+232outputs (0major+7732minor)pagefaults 0swaps - -Finished testing h5perf_serial -============================ diff --git a/perform/iopipe b/perform/iopipe deleted file mode 100644 index c596b24..0000000 --- a/perform/iopipe +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# iopipe - temporary wrapper script for .libs/iopipe -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The iopipe program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file iopipe.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'iopipe' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/iopipe.chkexe b/perform/iopipe.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/iopipe.chklog b/perform/iopipe.chklog deleted file mode 100644 index 583e8f6..0000000 --- a/perform/iopipe.chklog +++ /dev/null @@ -1,24 +0,0 @@ -============================ - iopipe Test Log -============================ -fill raw ============================================= -fill hdf5 ============================================= -out raw ============================================= -out hdf5 ============================================= -in raw ============================================= -in hdf5 ============================================= -in hdf5 partial ============================================= -I/O request size is 1000000.0MB -Before getrusage() call -fill raw 0.01user 0.00system 0.01elapsed 3245.99MB/s -fill hdf5 0.00user 0.00system 0.01elapsed 7754.61MB/s -out raw 0.00user 0.02system 0.02elapsed 2195.15MB/s -out hdf5 0.00user 0.02system 0.02elapsed 2154.40MB/s -in raw 0.00user 0.02system 0.02elapsed 2468.22MB/s -in hdf5 0.00user 0.01system 0.01elapsed 5232.41MB/s -in hdf5 partial 0.02user 0.01system 0.03elapsed 1619.29MB/s -0.09user 0.30system 0:02.44elapsed 16%CPU (0avgtext+0avgdata 0maxresident)k -264inputs+4024outputs (2major+16447minor)pagefaults 0swaps - -Finished testing iopipe -============================ diff --git a/perform/iopipe.h5 b/perform/iopipe.h5 deleted file mode 100644 index 1048f34..0000000 Binary files a/perform/iopipe.h5 and /dev/null differ diff --git a/perform/iopipe.raw b/perform/iopipe.raw deleted file mode 100644 index 7c2624a..0000000 Binary files a/perform/iopipe.raw and /dev/null differ diff --git a/perform/overhead b/perform/overhead deleted file mode 100644 index 4373671..0000000 --- a/perform/overhead +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# overhead - temporary wrapper script for .libs/overhead -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The overhead program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file overhead.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'overhead' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/overhead.chkexe b/perform/overhead.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/overhead.chklog b/perform/overhead.chklog deleted file mode 100644 index c2e61d2..0000000 --- a/perform/overhead.chklog +++ /dev/null @@ -1,15 +0,0 @@ -============================ - overhead Test Log -============================ -Style Bytes/Chunk ------ ----------- -forward 41.320 -reverse 43.416 -inward 70.664 -outward 41.320 -random 53.896 -0.11user 0.05system 0:00.23elapsed 74%CPU (0avgtext+0avgdata 0maxresident)k -16inputs+600outputs (0major+7761minor)pagefaults 0swaps - -Finished testing overhead -============================ diff --git a/perform/perf_meta b/perform/perf_meta deleted file mode 100644 index 4ce87eb..0000000 --- a/perform/perf_meta +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# perf_meta - temporary wrapper script for .libs/perf_meta -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The perf_meta program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file perf_meta.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'perf_meta' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/perf_meta.chkexe b/perform/perf_meta.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/perf_meta.chklog b/perform/perf_meta.chklog deleted file mode 100644 index 14c8e37..0000000 --- a/perform/perf_meta.chklog +++ /dev/null @@ -1,23 +0,0 @@ -============================ - perf_meta Test Log -============================ - Performance result of metadata for datasets and attributes - -1. Create 8 attributes for each of 16 existing datasets - H5Dopen2: avg=0.000022s; max=0.000039s; min=0.000019s - H5Dclose: avg=0.000066s; max=0.000905s; min=0.000009s - H5A(create & close): avg=0.000029s; max=0.002232s; min=0.000008s -2. Create 8 attributes for each of 16 new datasets - H5Dcreate2: avg=0.000025s; max=0.000035s; min=0.000021s - H5Dclose: avg=0.000002s; max=0.000003s; min=0.000002s - H5A(create & close): avg=0.000010s; max=0.000020s; min=0.000008s -3. Create 2 attributes for each of 16 existing datasets for 4 times - H5Dopen2: avg=0.000065s; max=0.002824s; min=0.000019s - H5Dclose: avg=0.000009s; max=0.000012s; min=0.000008s - H5A(create & close): avg=0.000013s; max=0.000022s; min=0.000009s -All metadata performance tests passed. -0.03user 0.02system 0:00.15elapsed 37%CPU (0avgtext+0avgdata 0maxresident)k -32inputs+976outputs (0major+7823minor)pagefaults 0swaps - -Finished testing perf_meta -============================ diff --git a/perform/x-diag-rd.dat b/perform/x-diag-rd.dat deleted file mode 100644 index f5588f6..0000000 --- a/perform/x-diag-rd.dat +++ /dev/null @@ -1,11 +0,0 @@ -0.5 0.256466 -1 0.508621 -1.5 0.625 -2 1 -2.5 0.71875 -3 0.801887 -3.5 0.77877 -4 1 -4.5 0.840372 -5 0.892857 - diff --git a/perform/x-diag-wr.dat b/perform/x-diag-wr.dat deleted file mode 100644 index d3e86b1..0000000 --- a/perform/x-diag-wr.dat +++ /dev/null @@ -1,11 +0,0 @@ -0.5 0.128233 -1 0.256522 -1.5 0.314748 -2 1 -2.5 0.410714 -3 0.53125 -3.5 0.485767 -4 1 -4.5 0.578488 -5 0.690955 - diff --git a/perform/x-gnuplot b/perform/x-gnuplot deleted file mode 100644 index c6d8f44..0000000 --- a/perform/x-gnuplot +++ /dev/null @@ -1,44 +0,0 @@ -set yrange [0:1.2] -set ytics 0, 0.1, 1 -set xlabel "Request size as a fraction of chunk size" -set ylabel "Efficiency" -set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)" -set terminal postscript -set output "x-rowmaj-rd.ps" -plot "x-rowmaj-rd.dat" title "RowMaj-Read" with lines -set terminal x11 -replot -pause -1 -set yrange [0:1.2] -set ytics 0, 0.1, 1 -set xlabel "Request size as a fraction of chunk size" -set ylabel "Efficiency" -set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)" -set terminal postscript -set output "x-rowmaj-wr.ps" -plot "x-rowmaj-wr.dat" title "RowMaj-Write" with lines -set terminal x11 -replot -pause -1 -set yrange [0:1.2] -set ytics 0, 0.1, 1 -set xlabel "Request size as a fraction of chunk size" -set ylabel "Efficiency" -set title "Cache 25 chunks,w0=0.75, Size=(total=2000, chunk=100)" -set terminal postscript -set output "x-diag-rd.ps" -plot "x-diag-rd.dat" title "Diag-Read" with lines -set terminal x11 -replot -pause -1 -set yrange [0:1.2] -set ytics 0, 0.1, 1 -set xlabel "Request size as a fraction of chunk size" -set ylabel "Efficiency" -set title "Cache 25 chunks, w0=0.75, Size=(total=2000, chunk=100)" -set terminal postscript -set output "x-diag-wr.ps" -plot "x-diag-wr.dat" title "Diag-Write" with lines -set terminal x11 -replot -pause -1 diff --git a/perform/x-rowmaj-rd.dat b/perform/x-rowmaj-rd.dat deleted file mode 100644 index 43c1bcb..0000000 --- a/perform/x-rowmaj-rd.dat +++ /dev/null @@ -1,11 +0,0 @@ -0.5 1 -1 1 -1.5 0.750469 -2 1 -2.5 0.833333 -3 1 -3.5 0.869565 -4 1 -4.5 0.909091 -5 1 - diff --git a/perform/x-rowmaj-wr.dat b/perform/x-rowmaj-wr.dat deleted file mode 100644 index 600859b..0000000 --- a/perform/x-rowmaj-wr.dat +++ /dev/null @@ -1,11 +0,0 @@ -0.5 0.5 -1 1 -1.5 0.445931 -2 1 -2.5 0.568182 -3 1 -3.5 0.633914 -4 1 -4.5 0.719424 -5 1 - diff --git a/perform/zip_perf b/perform/zip_perf deleted file mode 100644 index 22213f6..0000000 --- a/perform/zip_perf +++ /dev/null @@ -1,148 +0,0 @@ -#! /bin/sh - -# zip_perf - temporary wrapper script for .libs/zip_perf -# Generated by ltmain.sh (GNU libtool) 2.2.6 -# -# The zip_perf program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='/bin/sed -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command="(cd /home/abyrne/HDF_Projects/HDF5-C-1.8/perform; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; { test -z \"\${LD_LIBRARY_PATH+set}\" || unset LD_LIBRARY_PATH || { LD_LIBRARY_PATH=; export LD_LIBRARY_PATH; }; }; PATH=/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/sbin:/usr/sbin:/sbin:/home/abyrne/bin; export PATH; gcc -fPIC -std=c99 -pedantic -Wall -Wextra -Wundef -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion -Waggregate-return -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wnested-externs -Winline -Wno-long-long -Wfloat-equal -Wmissing-format-attribute -Wmissing-noreturn -Wpacked -Wdisabled-optimization -Wformat=2 -Wunreachable-code -Wendif-labels -Wdeclaration-after-statement -Wold-style-definition -Winvalid-pch -Wvariadic-macros -Wnonnull -Winit-self -Wmissing-include-dirs -Wswitch-default -Wswitch-enum -Wunused-macros -Wunsafe-loop-optimizations -Wc++-compat -Wvolatile-register-var -Wstrict-overflow -Wlogical-op -Wvla -O0 -fomit-frame-pointer -finline-functions -o \$progdir/\$file zip_perf.o -L/home/abyrne/HDF_Projects/SZIP/szip/lib ../tools/lib/.libs/libh5tools.a ../test/.libs/libh5test.a ../src/.libs/libhdf5.so /home/abyrne/HDF_Projects/SZIP/szip/lib/libsz.a -lz -lm -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/src/.libs -Wl,-rpath -Wl,/home/abyrne/HDF_Projects/HDF5-C-1.8/hdf5/lib)" - -# This environment variable determines our operation mode. -if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then - # install mode needs the following variables: - generated_by_libtool_version='2.2.6' - notinst_deplibs=' ../src/libhdf5.la' -else - # When we are sourced in execute mode, $file and $ECHO are already set. - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - ECHO="echo" - file="$0" - # Make sure echo works. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : - else - # Restart under the correct shell, and then maybe $ECHO will work. - exec /bin/sh "$0" --no-reexec ${1+"$@"} - fi - fi - - # Find the directory that this script lives in. - thisdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "x$thisdir" = "x$file" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'` - while test -n "$file"; do - destdir=`$ECHO "X$file" | $Xsed -e 's%/[^/]*$%%'` - - # If there was a directory component, then change thisdir. - if test "x$destdir" != "x$file"; then - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;; - *) thisdir="$thisdir/$destdir" ;; - esac - fi - - file=`$ECHO "X$file" | $Xsed -e 's%^.*/%%'` - file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'` - done - - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no - if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then - # special case for '.' - if test "$thisdir" = "."; then - thisdir=`pwd` - fi - # remove .libs from thisdir - case "$thisdir" in - *[\\/].libs ) thisdir=`$ECHO "X$thisdir" | $Xsed -e 's%[\\/][^\\/]*$%%'` ;; - .libs ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=`cd "$thisdir" && pwd` - test -n "$absdir" && thisdir="$absdir" - - program=lt-'zip_perf' - progdir="$thisdir/.libs" - - if test ! -f "$progdir/$program" || - { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \ - test "X$file" != "X$progdir/$program"; }; then - - file="$$-$program" - - if test ! -d "$progdir"; then - mkdir "$progdir" - else - rm -f "$progdir/$file" - fi - - # relink executable if necessary - if test -n "$relink_command"; then - if relink_command_output=`eval $relink_command 2>&1`; then : - else - echo "$relink_command_output" >&2 - rm -f "$progdir/$file" - exit 1 - fi - fi - - mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null || - { rm -f "$progdir/$program"; - mv -f "$progdir/$file" "$progdir/$program"; } - rm -f "$progdir/$file" - fi - - if test -f "$progdir/$program"; then - if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then - # Run the actual program with our arguments. - - exec "$progdir/$program" ${1+"$@"} - - $ECHO "$0: cannot exec $program $*" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2 - $ECHO "This script is just a wrapper for $program." 1>&2 - echo "See the libtool documentation for more information." 1>&2 - exit 1 - fi -fi diff --git a/perform/zip_perf.chkexe b/perform/zip_perf.chkexe deleted file mode 100644 index e69de29..0000000 diff --git a/perform/zip_perf.chklog b/perform/zip_perf.chklog deleted file mode 100644 index 156146f..0000000 --- a/perform/zip_perf.chklog +++ /dev/null @@ -1,38 +0,0 @@ -============================ - zip_perf Test Log -============================ -Filesize: 67108864 -Compression Level: 6 -Buffer size == 128KB - Uncompressed Write Time: 0.14s - Uncompressed Write Throughput: 474.05MB/s - Compression Ratio: 0.00113678 - Compressed Write Time: 0.75s - Compressed Write Throughput: 85.06MB/s - Compression Time: 0.738815s -Buffer size == 256KB - Uncompressed Write Time: 0.12s - Uncompressed Write Throughput: 556.16MB/s - Compression Ratio: 0.00105667 - Compressed Write Time: 0.74s - Compressed Write Throughput: 86.99MB/s - Compression Time: 0.733302s -Buffer size == 512KB - Uncompressed Write Time: 0.12s - Uncompressed Write Throughput: 547.23MB/s - Compression Ratio: 0.0010128 - Compressed Write Time: 0.76s - Compressed Write Throughput: 84.15MB/s - Compression Time: 0.758976s -Buffer size == 1MB - Uncompressed Write Time: 0.12s - Uncompressed Write Throughput: 540.06MB/s - Compression Ratio: 0.000990868 - Compressed Write Time: 0.76s - Compressed Write Throughput: 84.04MB/s - Compression Time: 0.760352s -2.94user 0.63system 0:03.75elapsed 95%CPU (0avgtext+0avgdata 0maxresident)k -32inputs+528768outputs (0major+34635minor)pagefaults 0swaps - -Finished testing zip_perf -============================ -- cgit v0.12