name: hdf5 1.14 autotools special CI # Controls when the action will run. Triggers the workflow on a call on: workflow_call: permissions: contents: read # A workflow run is made up of one or more jobs that can run sequentially or # in parallel. We just have one job, but the matrix items defined below will # run in parallel. jobs: # # SPECIAL AUTOTOOLS BUILDS # # These do not run tests and are not built into the matrix and instead # become NEW configs as their name would clobber one of the matrix # names (so make sure the names are UNIQUE). # build_v1_6: name: "gcc DBG v1.6 default API (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v16 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_v1_8: name: "gcc DBG v1.8 default API (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v18 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_v1_10: name: "gcc DBG v1.10 default API (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v110 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_v1_12: name: "gcc DBG v1.12 default API (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v112 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_v1_14: name: "gcc DBG v1.14 default API (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v114 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_no_deprecated: name: "gcc no deprecated symbols (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --disable-deprecated-symbols \ --with-default-api-version=default \ --enable-shared \ --disable-parallel \ --enable-cxx \ --enable-fortran \ --enable-java \ --enable-mirror-vfd \ --enable-direct-vfd \ --enable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_debug_werror: name: "gcc DBG -Werror (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" CFLAGS=-Werror $GITHUB_WORKSPACE/configure \ --enable-build-mode=debug \ --enable-deprecated-symbols \ --with-default-api-version=v114 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --disable-fortran \ --enable-java \ --disable-mirror-vfd \ --enable-direct-vfd \ --disable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build build_release_werror: name: "gcc REL -Werror (build only)" runs-on: ubuntu-latest steps: # SETUP # Only CMake need ninja-build, but we just install it unilaterally # libssl, etc. are needed for the ros3 VFD - name: Install Linux Dependencies run: | sudo apt update sudo apt-get install ninja-build doxygen graphviz sudo apt install libssl3 libssl-dev libcurl4 libcurl4-openssl-dev sudo apt install gcc-12 g++-12 gfortran-12 echo "CC=gcc-12" >> $GITHUB_ENV echo "CXX=g++-12" >> $GITHUB_ENV echo "FC=gfortran-12" >> $GITHUB_ENV - name: Install Autotools Dependencies (Linux) run: | sudo apt install automake autoconf libtool libtool-bin sudo apt install libaec0 libaec-dev # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it - name: Get Sources uses: actions/checkout@v4.1.1 # AUTOTOOLS CONFIGURE - name: Autotools Configure run: | sh ./autogen.sh mkdir "${{ runner.workspace }}/build" cd "${{ runner.workspace }}/build" CFLAGS=-Werror $GITHUB_WORKSPACE/configure \ --enable-build-mode=production \ --enable-deprecated-symbols \ --with-default-api-version=v114 \ --enable-shared \ --disable-parallel \ --enable-cxx \ --disable-fortran \ --enable-java \ --disable-mirror-vfd \ --enable-direct-vfd \ --disable-ros3-vfd \ --with-szlib=yes shell: bash # BUILD - name: Autotools Build run: make -j3 working-directory: ${{ runner.workspace }}/build # INSTALL (note that this runs even when we don't run the tests) - name: Autotools Install run: make install working-directory: ${{ runner.workspace }}/build - name: Autotools Verify Install run: make check-install working-directory: ${{ runner.workspace }}/build