#!/bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5. The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://www.hdfgroup.org/licenses.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
#
# Make a release of hdf5.
#
# NOTE:
# This script differs from bin/release in that this has an added
# --revision option to create private releases with the code revision
# hash in the version strings.
#
# This script can probably be merged into the original release script in
# the future.
# Function definitions
#
# Print Usage page
USAGE()
{
cat << EOF
Usage: $0 -d
[--docver BRANCHNAME] [-h] [--private] [--revision] ...
-d DIR The name of the directory where the release(s) should be
placed.
--docver BRANCHNAME This is added for 1.8 and beyond to get the correct
version of documentation files from the hdf5docs
repository. BRANCHNAME for v1.8 should be hdf5_1_8.
-h print the help page.
--private Make a private release with today's date in version information.
--revision Make a private release with the code revision number in version information.
This must be run at the top level of the source directory.
The other command-line options are the names of the programs to use
for compressing the resulting tar archive (if none are given then
"tar" is assumed):
tar -- use tar and don't do any compressing.
gzip -- use gzip with "-9" and append ".gz" to the output name.
bzip2 -- use bzip2 with "-9" and append ".bz2" to the output name.
zip -- convert all text files to DOS style and form a zip file for Windows use.
doc -- produce the latest doc tree in addition to the archive.
An md5 checksum is produced for each archive created and stored in the md5 file.
Examples:
$ bin/release -d /tmp
/tmp/hdf5-1.8.13-RELEASE.txt
/tmp/hdf5-1.8.13.md5
/tmp/hdf5-1.8.13.tar
$ bin/release -d /tmp gzip
/tmp/hdf5-1.8.13-RELEASE.txt
/tmp/hdf5-1.8.13.md5
/tmp/hdf5-1.8.13.tar.gz
$ bin/release -d /tmp tar gzip zip
/tmp/hdf5-1.8.13-RELEASE.txt
/tmp/hdf5-1.8.13.md5
/tmp/hdf5-1.8.13.tar
/tmp/hdf5-1.8.13.tar.gz
/tmp/hdf5-1.8.13.tar.zip
EOF
}
# Function name: tar2zip
# Convert the release tarball to a Windows zipball.
#
# Steps:
# 1. untar the tarball in a temporary directory;
# Note: do this in a temporary directory to avoid changing
# the original source directory which may be around.
# 2. convert all its text files to DOS (LF-CR) style;
# 3. form a zip file which is usable by Windows users.
#
# Parameters:
# $1 version
# $2 release tarball
# $3 output zipball file name
#
# Returns 0 if successful; 1 otherwise
#
tar2zip()
{
if [ $# -ne 3 ]; then
echo "usage: tar2zip "
return 1
fi
ztmpdir=/tmp/tmpdir$$
mkdir -p $ztmpdir
version=$1
tarfile=$2
zipfile=$3
# step 1: untar tarball in ztmpdir
(cd $ztmpdir; tar xf -) < $tarfile
# sanity check
if [ ! -d $ztmpdir/$version ]; then
echo "untar did not create $ztmpdir/$version source dir"
# cleanup
rm -rf $ztmpdir
return 1
fi
# step 2: convert text files
# There maybe a simpler way to do this.
# options used in unix2dos:
# -k Keep the date stamp
# -q quiet mode
# grep redirect output to /dev/null because -q or -s are not portable.
find $ztmpdir/$version | \
while read inf; do \
if file $inf | grep "$inf\: .*text" > /dev/null 2>&1 ; then \
unix2dos -q -k $inf; \
fi\
done
# step 3: make zipball
# -9 maximum compression
# -y Store symbolic links as such in the zip archive
# -r recursive
# -q quiet
(cd $ztmpdir; zip -9 -y -r -q $version.zip $version)
mv $ztmpdir/$version.zip $zipfile
# cleanup
rm -rf $ztmpdir
}
# This command must be run at the top level of the hdf5 source directory.
# Verify this requirement.
if [ ! \( -f configure.ac -a -f bin/bbrelease \) ]; then
echo "$0 must be run at the top level of the hdf5 source directory"
exit 1
fi
# Defaults
DEST=releases
VERS=`perl bin/h5vers`
VERS_OLD=
test "$VERS" || exit 1
verbose=yes
release_date=`date +%F`
today=`date +%Y%m%d`
pmode='no'
revmode='no'
tmpdir="../#release_tmp.$$" # tmp work directory
DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git
CPPLUS_RM_NAME=cpplus_RM
# Restore previous Version information
RESTORE_VERSION()
{
if [ X-${VERS_OLD} != X- ]; then
echo restoring version information back to $VERS_OLD
rm -f config/lt_vers.am
cp $tmpdir/lt_vers.am config/lt_vers.am
bin/h5vers -s $VERS_OLD
VERS_OLD=
fi
}
# Command-line arguments
while [ -n "$1" ]; do
arg=$1
shift
case "$arg" in
-d)
DEST=$1
shift
;;
-h)
USAGE
exit 0
;;
--private)
pmode=yes
;;
--revision)
revmode=yes
;;
--docver)
DOCVERSION=$1
shift
;;
-*)
echo "Unknown switch: $arg" 1>&2
USAGE
exit 1
;;
*)
methods="$methods $arg"
;;
esac
done
# Default method is tar
if [ "X$methods" = "X" ]; then
methods="tar"
fi
# Create the temporary work directory.
if mkdir $tmpdir; then
echo "temporary work directory for release. "\
"Can be deleted after release completes." > $tmpdir/README
else
echo "Failed to mkdir tmpdir($tmpdir)"
exit 1
fi
# setup restoration in case of abort.
trap RESTORE_VERSION 0
if [ X$pmode = Xyes ]; then
VERS_OLD=$VERS
# Copy old version of config/lt_vers.am, since it's hard to
# "undo" changes to it.
cp config/lt_vers.am $tmpdir
# Set version information to m.n.r-of$today.
# (h5vers does not correctly handle just m.n.r-$today.)
VERS=`echo $VERS | sed -e s/-.*//`-of$today
echo Private release of $VERS
bin/h5vers -s $VERS
fi
if [ X$revmode = Xyes ]; then
VERS_OLD=$VERS
echo "Save old version $VERS_OLD for restoration later."
# Copy old version of config/lt_vers.am, since it's hard to
# "undo" changes to it.
cp config/lt_vers.am $tmpdir
branch=`git branch | grep '*' | awk '{print $NF}'`
revision=`git rev-parse --short HEAD`
# Set version information to m.n.r-r$revision.
# (h5vers does not correctly handle just m.n.r-$today.)
VERS=`echo $VERS | sed -e s/-.*//`-$revision
echo Private release of $VERS
HDF5_VERS=hdf5-$branch-$revision
echo file base of $HDF5_VERS
bin/h5vers -s $VERS
# use a generic directory name for revision releases
HDF5_IN_VERS=hdfsrc
else
# Store hdf5-$VERS ("hdf5-1.7.51", e.g.) to a variable to avoid typos
HDF5_VERS=hdf5-$VERS
# directory name matches tar file name for non-revision releases
HDF5_IN_VERS=$HDF5_VERS
fi
test "$verbose" && echo "Releasing $HDF5_VERS to $DEST" 1>&2
if [ ! -d $DEST ]; then
echo " Destination directory $DEST does not exist" 1>&2
exit 1
fi
# Create a symlink to the source so files in the tarball have the prefix
# we want (gnu's --transform isn't portable)
ln -s `pwd` $tmpdir/$HDF5_IN_VERS || exit 1
# Save a backup copy of Makefile if exists.
test -f Makefile && mv Makefile $tmpdir/Makefile.x
cp -p Makefile.dist Makefile
# Update README.md and release_docs/RELEASE.txt with release information in
# line 1.
for f in README.md release_docs/RELEASE.txt; do
echo "HDF5 version $VERS released on $release_date" >$f.x
sed -e 1d $f >>$f.x
mv $f.x $f
# Make sure new files are of the right access mode
chmod 644 $f
done
# develop is different than branches.
if [ "${DOCVERSION}" ]; then
DOC_URL=https://git@bitbucket.hdfgroup.org/scm/hdffv/hdf5doc.git -b ${DOCVERSION}
fi
# Create the tar file
test "$verbose" && echo " Running tar..." 1>&2
(cd "$tmpdir" && exec tar -ch --exclude-vcs -f "$HDF5_VERS.tar" "./$HDF5_IN_VERS" || exit 1 )
# Compress
MD5file=$HDF5_VERS.md5
cp /dev/null $DEST/$MD5file
for comp in $methods; do
case $comp in
tar)
cp -p $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.tar
(cd $DEST; md5sum $HDF5_VERS.tar >> $MD5file)
;;
gzip)
test "$verbose" && echo " Running gzip..." 1>&2
gzip -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.gz
(cd $DEST; md5sum $HDF5_VERS.tar.gz >> $MD5file)
;;
bzip2)
test "$verbose" && echo " Running bzip2..." 1>&2
bzip2 -9 <$tmpdir/$HDF5_VERS.tar >$DEST/$HDF5_VERS.tar.bz2
(cd $DEST; md5sum $HDF5_VERS.tar.bz2 >> $MD5file)
;;
zip)
test "$verbose" && echo " Creating zip ball..." 1>&2
tar2zip $HDF5_IN_VERS $tmpdir/$HDF5_VERS.tar $DEST/$HDF5_VERS.zip 1>&2
(cd $DEST; md5sum $HDF5_VERS.zip >> $MD5file)
;;
doc)
if [ "${DOCVERSION}" = "" ]; then
DOCVERSION=master
fi
test "$verbose" && echo " Creating docs..." 1>&2
# Check out docs from git repo
(cd $tmpdir; git clone $DOC_URL > /dev/null) || exit 1
# Create doxygen C++ RM
(cd c++/src && doxygen cpp_doc_config > /dev/null ) || exit 1
# Replace version of C++ RM with just-created version
rm -rf $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME
mv c++/src/$CPPLUS_RM_NAME $tmpdir/${DOCVERSION}/html/$CPPLUS_RM_NAME
# Compress the docs and move them to the release area
mv $tmpdir/$DOCVERSION $tmpdir/${HDF5_VERS}_docs
(cd $tmpdir && tar cf ${HDF5_VERS}_docs.tar ${HDF5_VERS}_docs)
mv $tmpdir/${HDF5_VERS}_docs.tar $DEST
;;
*)
echo "***Error*** Unknown method $comp"
exit 1
;;
esac
done
# Copy the RELEASE.txt to the release area.
cp release_docs/RELEASE.txt $DEST/$HDF5_VERS-RELEASE.txt
# Remove distributed Makefile and restore previous Makefile if existed.
rm -f Makefile
test -f $tmpdir/Makefile.x && mv $tmpdir/Makefile.x Makefile
# Restore OLD version information, then no need for trap.
if [ X$pmode = Xyes ] || [ X$revmode = Xyes ]; then
echo "Restore the original version $VERS_OLD"
RESTORE_VERSION
trap 0
fi
# Remove temporary things
rm -rf $tmpdir
echo "DONE"
exit 0