# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # HDF5 Library Examples Makefile(.in) # SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include # Set the paths for autotools to be correct on heping. # Ideally, these tools should never be needed during the build. ACLOCAL = /usr/bin/aclocal AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf AUTOMAKE = /usr/bin/automake AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ # Use h5c++ to build examples, instead of reguar C++ compiler H5CPP = $(bindir)/h5c++ # These are the programs that 'make all' or 'make prog' will build and # which 'make check' will run. List them in the order they should be run. TEST_PROG = create readdata writedata compound extend_ds chunks h5group EXAMPLE_PROG = $(TEST_PROG) # Tell conclude.in when to build the examples EXTRA_PROG = $(TEST_PROG) # These are the example files to be installed INSTALL_FILES = create.cpp readdata.cpp writedata.cpp compound.cpp \ extend_ds.cpp chunks.cpp h5group.cpp # These are the files that 'make clean' (and derivatives) will remove from this # directory. Since automake doesn't know about the examples, we need to # tell it to clean the example programs, too. MOSTLYCLEANFILES = *.h5 CLEANFILES = $(EXTRA_PROG) # How to install examples EXAMPLEDIR = $(docdir)/hdf5/examples/c++ # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) subdir = c++/examples mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = DIST_SOURCES = DIST_COMMON = Makefile.am Makefile.in all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign c++/examples/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: tags: TAGS TAGS: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = ../.. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-generic distclean-libtool dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-am install-man: installcheck-am: installcheck-local maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool uninstall-am: uninstall-info-am uninstall-local .PHONY: all all-am all-local check check-TESTS check-am clean \ clean-generic clean-libtool distclean distclean-generic \ distclean-libtool distdir dvi dvi-am info info-am install \ install-am install-data install-data-am install-data-local \ install-exec install-exec-am install-info install-info-am \ install-man install-strip installcheck installcheck-am \ installcheck-local installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool uninstall uninstall-am uninstall-info-am \ uninstall-local $(EXAMPLEDIR): -$(top_srcdir)/bin/mkdirs $@ install-data-local: $(MAKE) install-examples uninstall-local: $(MAKE) uninstall-examples # Install source files, which are the examples with .cpp suffixes. Do the same # for uninstall. install-examples: $(EXAMPLEDIR) @for f in X $(INSTALL_FILES); do \ if test $$f != X; then \ (set -x; $(INSTALL_DATA) $(top_srcdir)/c++/examples/$$f $(EXAMPLEDIR)/. || exit 1);\ fi; \ done uninstall-examples: @if test -n "$(INSTALL_FILES)" -a -d $(EXAMPLEDIR); then \ set -x; cd $(EXAMPLEDIR) && $(RM) $(INSTALL_FILES).cpp; \ fi check-install: $(MAKE) installcheck installcheck-local: $(MAKE) check # How to build programs using h5c++ $(EXTRA_PROG): $(H5CPP) $(LIBHDF5) $(LIBH5CPP) $(H5CPP) $(CPPFLAGS) -o $@ $(srcdir)/$@.cpp # List dependencies for each program. Normally, automake would take # care of this for us, but if we tell automake about the programs it # will try to build them with the normal C++ compiler, not h5c++. This is # an inelegant way of solving the problem, unfortunately. create: $(srcdir)/create.cpp readdata: $(srcdir)/readdata.cpp writedata: $(srcdir)/writedata.cpp compound: $(srcdir)/compound.cpp extend_ds: $(srcdir)/extend_ds.cpp chunks: $(srcdir)/chunks.cpp h5group: $(srcdir)/h5group.cpp # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; \ for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @for test in $(TEST_PROG) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTEST) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ /bin/sh $$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: