/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
 * Copyright by The HDF Group.                                               *
 * Copyright by the Board of Trustees of the University of Illinois.         *
 * All rights reserved.                                                      *
 *                                                                           *
 * This file is part of HDF5.  The full HDF5 copyright notice, including     *
 * terms governing use, modification, and redistribution, is contained in    *
 * the files COPYING and Copyright.html.  COPYING can be found at the root   *
 * of the source code distribution tree; Copyright.html can be found at the  *
 * root level of an installed copy of the electronic HDF5 document set and   *
 * is linked from the top-level documents page.  It can also be found at     *
 * http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have          *
 * access to either file, you may request a copy from help@hdfgroup.org.     *
 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

#include <string>

#include "H5Include.h"
#include "H5Exception.h"
#include "H5IdComponent.h"
#include "H5PropList.h"
#include "H5FaccProp.h"
#include "H5OcreatProp.h"

#ifndef H5_NO_NAMESPACE
namespace H5 {
#endif

#ifndef DOXYGEN_SHOULD_SKIP_THIS
// This DOXYGEN_SHOULD_SKIP_THIS block is a work-around approach to control
// the order of creation and deletion of the global constants.  See Design Notes
// in "H5PredType.cpp" for information.

// Initialize a pointer for the constant
ObjCreatPropList* ObjCreatPropList::DEFAULT_ = 0;

//--------------------------------------------------------------------------
// Function:    ObjCreatPropList::getConstant
//              Creates a ObjCreatPropList object representing the HDF5 constant
//              H5P_FILE_ACCESS, pointed to by ObjCreatPropList::DEFAULT_
// exception    H5::PropListIException
// Description
//              If ObjCreatPropList::DEFAULT_ already points to an allocated
//              object, throw a PropListIException.  This scenario should not
//              happen.
// Programmer   Binh-Minh Ribler - 2015
//--------------------------------------------------------------------------
ObjCreatPropList* ObjCreatPropList::getConstant()
{
    // Tell the C library not to clean up, H5Library::termH5cpp will call
    // H5close - more dependency if use H5Library::dontAtExit()
    if (!IdComponent::H5dontAtexit_called)
    {
        (void) H5dont_atexit();
        IdComponent::H5dontAtexit_called = true;
    }

    // If the constant pointer is not allocated, allocate it. Otherwise,
    // throw because it shouldn't be.
    if (DEFAULT_ == 0)
        DEFAULT_ = new ObjCreatPropList(H5P_OBJECT_CREATE);
    else
        throw PropListIException("ObjCreatPropList::getConstant", "ObjCreatPropList::getConstant is being invoked on an allocated DEFAULT_");
    return(DEFAULT_);
}

//--------------------------------------------------------------------------
// Function:    ObjCreatPropList::deleteConstants
// Purpose:     Deletes the constant object that ObjCreatPropList::DEFAULT_
//              points to.
// exception    H5::PropListIException
// Programmer   Binh-Minh Ribler - 2015
//--------------------------------------------------------------------------
void ObjCreatPropList::deleteConstants()
{
    if (DEFAULT_ != 0)
        delete DEFAULT_;
}

//--------------------------------------------------------------------------
// Purpose:	Constant for default property
//--------------------------------------------------------------------------
const ObjCreatPropList& ObjCreatPropList::DEFAULT = *getConstant();

#endif // DOXYGEN_SHOULD_SKIP_THIS

//--------------------------------------------------------------------------
// Function:	Default Constructor
///\brief	Creates a file access property list
// Programmer:	Binh-Minh Ribler - 2000
//--------------------------------------------------------------------------
ObjCreatPropList::ObjCreatPropList() : PropList(H5P_OBJECT_CREATE) {}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList copy constructor
///\brief	Copy Constructor: makes a copy of the original
///\param	original - IN: ObjCreatPropList instance to copy
// Programmer:	Binh-Minh Ribler - 2000
//--------------------------------------------------------------------------
ObjCreatPropList::ObjCreatPropList(const ObjCreatPropList& original) : PropList(original) {}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList overloaded constructor
///\brief	Creates a file access property list using the id of an
///		existing one.
// Programmer:  Binh-Minh Ribler - 2000
//--------------------------------------------------------------------------
ObjCreatPropList::ObjCreatPropList(const hid_t plist_id) : PropList(plist_id) {}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList::setAttrPhaseChange
///\brief	Sets attribute storage phase change thresholds.
///\param	max_compact - IN: Maximum number of attributes to be stored in
///				  compact storage.  Default to 8
///\param	min_dense   - IN: Minimum number of attributes to be stored in
///				  dense storage.  Default to 6
///\exception	H5::PropListIException
///\par Description
///		If \c max_compact is set to 0, dense storage will be used.
///		For more detail about on attribute storage, please refer to the
///		C layer Reference Manual at:
/// https://www.hdfgroup.org/HDF5/doc/RM/RM_H5P.html#Property-SetAttrPhaseChange
// Programmer:  Binh-Minh Ribler - September 2015
//--------------------------------------------------------------------------
void ObjCreatPropList::setAttrPhaseChange(unsigned max_compact, unsigned min_dense) const
{
    herr_t ret_value = H5Pset_attr_phase_change(id, max_compact, min_dense);
    if (ret_value < 0)
    {
        throw PropListIException("ObjCreatPropList::setAttrPhaseChange", "H5Pset_attr_phase_change failed");
    }
}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList::getAttrPhaseChange
///\brief	Gets attribute storage phase change thresholds.
///\param	max_compact - OUT: Maximum number of attributes to be stored in
///				  compact storage.
///\param	min_dense   - OUT: Minimum number of attributes to be stored in
///				  dense storage.
///\exception	H5::PropListIException
///\par Description
///		If \c max_compact is set to 0, dense storage will be used.
///		For more detail about on attribute storage, please refer to the
///		C layer Reference Manual at:
/// https://www.hdfgroup.org/HDF5/doc/RM/RM_H5P.html#Property-GetAttrPhaseChange
// Programmer:  Binh-Minh Ribler - September 2015
//--------------------------------------------------------------------------
void ObjCreatPropList::getAttrPhaseChange(unsigned& max_compact, unsigned& min_dense) const
{
    herr_t ret_value;
    ret_value = H5Pget_attr_phase_change(id, &max_compact, &min_dense);
    if (ret_value < 0)
    {
        throw PropListIException("ObjCreatPropList::getAttrPhaseChange", "H5Pget_attr_phase_change failed");
    }
}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList::setAttrCrtOrder
///\brief	Sets tracking and indexing of attribute creation order.
///\param	crt_order_flags  - IN: Flags specifying whether to track and
///			index attribute creation order.  Default: No flag set
///\exception	H5::PropListIException
///\par Description
///		Valid flags are:
///		\li \c H5P_CRT_ORDER_TRACKED - Attribute creation order is tracked
///		\li \c H5P_CRT_ORDER_INDEXED - Attribute creation order is
///				 indexed (requires H5P_CRT_ORDER_TRACKED).
///		When no flag is set, attribute creation order is neither
///		tracked not indexed.  Note that HDF5 currently provides no
///		mechanism to turn on attribute creation order tracking at object
///		creation time and to build the index later.
///		The C layer Reference Manual at can be found at:
/// https://www.hdfgroup.org/HDF5/doc/RM/RM_H5P.html#Property-SetAttrCreationOrder
// Programmer:  Binh-Minh Ribler - September 2015
//--------------------------------------------------------------------------
void ObjCreatPropList::setAttrCrtOrder(unsigned crt_order_flags) const
{
    herr_t ret_value = H5Pset_attr_creation_order(id, crt_order_flags);
    if (ret_value < 0)
    {
        throw PropListIException("ObjCreatPropList::setAttrCrtOrder", "H5Pset_attr_creation_order failed");
    }
}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList::getAttrCrtOrder
///\brief	Gets tracking and indexing settings for attribute
///		creation order.
///\param	crt_order_flags - OUT: Flags specifying whether to track and
///					index attribute creation order
///\exception	H5::PropListIException
///\par Description
///		When no flag is set, i.e. crt_order_flags = 0, attribute
///		creation order is neither tracked not indexed.
///		The C layer Reference Manual at can be found at:
/// https://www.hdfgroup.org/HDF5/doc/RM/RM_H5P.html#Property-GetAttrCreationOrder
// Programmer:  Binh-Minh Ribler - September 2015
//--------------------------------------------------------------------------
unsigned ObjCreatPropList::getAttrCrtOrder() const
{
    herr_t ret_value;
    unsigned crt_order_flags = 0;
    ret_value = H5Pget_attr_creation_order(id, &crt_order_flags);
    if (ret_value < 0)
    {
        throw PropListIException("ObjCreatPropList::getAttrCrtOrder", "H5Pget_attr_creation_order failed");
    }
    return(crt_order_flags);
}

//--------------------------------------------------------------------------
// Function:	ObjCreatPropList destructor
///\brief	Noop destructor
// Programmer	Binh-Minh Ribler - 2000
//--------------------------------------------------------------------------
ObjCreatPropList::~ObjCreatPropList() {}

#ifndef H5_NO_NAMESPACE
} // end namespace
#endif