# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from help@hdfgroup.org. # # HDF5-C++ Makefile(.in) # VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/h5c++.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am \ $(top_srcdir)/config/lt_vers.am # Shared C++ libraries aren't universally supported. @CXX_SHARED_CONDITIONAL_FALSE@am__append_1 = -static TESTS = subdir = c++/src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = h5c++ CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ "$(DESTDIR)$(includedir)" LTLIBRARIES = $(lib_LTLIBRARIES) libhdf5_cpp_la_DEPENDENCIES = $(LIBHDF5) am_libhdf5_cpp_la_OBJECTS = H5Exception.lo H5IdComponent.lo \ H5Library.lo H5Attribute.lo H5Object.lo H5PropList.lo \ H5FaccProp.lo H5FcreatProp.lo H5DcreatProp.lo H5DxferProp.lo \ H5DataType.lo H5DataSpace.lo H5AbstractDs.lo H5AtomType.lo \ H5PredType.lo H5EnumType.lo H5IntType.lo H5FloatType.lo \ H5StrType.lo H5ArrayType.lo H5VarLenType.lo H5CompType.lo \ H5DataSet.lo H5CommonFG.lo H5Group.lo H5File.lo libhdf5_cpp_la_OBJECTS = $(am_libhdf5_cpp_la_OBJECTS) AM_V_lt = $(am__v_lt_$(V)) am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) am__v_lt_0 = --silent libhdf5_cpp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CXXLD) \ $(AM_CXXFLAGS) $(CXXFLAGS) $(libhdf5_cpp_la_LDFLAGS) \ $(LDFLAGS) -o $@ SCRIPTS = $(bin_SCRIPTS) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) AM_V_CXX = $(am__v_CXX_$(V)) am__v_CXX_ = $(am__v_CXX_$(AM_DEFAULT_VERBOSITY)) am__v_CXX_0 = @echo " CXX " $@; AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ CXXLD = $(CXX) CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CXXLD = $(am__v_CXXLD_$(V)) am__v_CXXLD_ = $(am__v_CXXLD_$(AM_DEFAULT_VERBOSITY)) am__v_CXXLD_0 = @echo " CXXLD " $@; AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(libhdf5_cpp_la_SOURCES) DIST_SOURCES = $(libhdf5_cpp_la_SOURCES) HEADERS = $(include_HEADERS) ETAGS = etags CTAGS = ctags am__tty_colors = \ red=; grn=; lgn=; blu=; std= DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. # AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ $(am__append_1) AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ # Set the paths for AFS installs of autotools for Linux machines # Ideally, these tools should never be needed during the build. AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ CLEARFILEBUF = @CLEARFILEBUF@ CODESTACK = @CODESTACK@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CXX_VERSION = @CXX_VERSION@ CYGPATH_W = @CYGPATH_W@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ DIRECT_VFD = @DIRECT_VFD@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FC2003 = @FC2003@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GPFS = @GPFS@ GREP = @GREP@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ H5_CXX_SHARED = @H5_CXX_SHARED@ H5_FCFLAGS = @H5_FCFLAGS@ H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ H5_LDFLAGS = @H5_LDFLAGS@ H5_LONE_COLON = @H5_LONE_COLON@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ HDF_FORTRAN2003 = @HDF_FORTRAN2003@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT = @INSTRUMENT@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LARGEFILE = @LARGEFILE@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LL_PATH = @LL_PATH@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MPE = @MPE@ MPI_GET_SIZE = @MPI_GET_SIZE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SED = @SED@ SETX = @SETX@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SIZE_T = @SIZE_T@ STATIC_EXEC = @STATIC_EXEC@ STATIC_SHARED = @STATIC_SHARED@ STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ STRIP = @STRIP@ TESTPARALLEL = @TESTPARALLEL@ THREADSAFE = @THREADSAFE@ TIME = @TIME@ TR = @TR@ TRACE_API = @TRACE_API@ UNAME_INFO = @UNAME_INFO@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ USINGMEMCHECKER = @USINGMEMCHECKER@ VERSION = @VERSION@ WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ac_ct_FC = @ac_ct_FC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ # Install directories that automake doesn't know about docdir = $(exec_prefix)/doc dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Shell commands used in Makefiles RM = rm -f CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. # We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below # has been removed. According to the official description of DESTDIR by Gnu at # http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is # prepended to the normal and complete install path that it precedes for the # purpose of installing in a temporary directory which is useful for building # rpms and other packages. The '/' after ${DESTDIR} will be followed by another # '/' at the beginning of the normal install path. When DESTDIR is empty the # path then begins with '//', which is incorrect and causes problems at least for # Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with # shared libraries instead of static libraries H5CC = ${DESTDIR}$(bindir)/h5cc H5CC_PP = ${DESTDIR}$(bindir)/h5pcc H5FC = ${DESTDIR}$(bindir)/h5fc H5FC_PP = ${DESTDIR}$(bindir)/h5pfc H5CPP = ${DESTDIR}$(bindir)/h5c++ ACLOCAL_AMFLAGS = "-I m4" # The trace script; this is used on source files from the C library to # insert tracing macros. TRACE = perl $(top_srcdir)/bin/trace # .chkexe files are used to mark tests that have run successfully. # .chklog files are output from those tests. # *.clog are from the MPE option. CHECK_CLEANFILES = *.chkexe *.chklog *.clog # Add libtool shared library version numbers to the HDF5 library # See libtool versioning documentation online. LT_VERS_INTERFACE = 6 LT_VERS_REVISION = 104 LT_VERS_AGE = 0 # Include src directory INCLUDES = -I$(top_srcdir)/src # This is our main target lib_LTLIBRARIES = libhdf5_cpp.la # Add libtool numbers to the HDF5 C++ library (from config/lt_vers.am) libhdf5_cpp_la_LDFLAGS = -version-info $(LT_VERS_INTERFACE):$(LT_VERS_REVISION):$(LT_VERS_AGE) $(AM_LDFLAGS) bin_SCRIPTS = h5c++ # Source files for the library libhdf5_cpp_la_SOURCES = H5Exception.cpp H5IdComponent.cpp H5Library.cpp \ H5Attribute.cpp H5Object.cpp H5PropList.cpp H5FaccProp.cpp \ H5FcreatProp.cpp H5DcreatProp.cpp H5DxferProp.cpp H5DataType.cpp \ H5DataSpace.cpp H5AbstractDs.cpp H5AtomType.cpp H5PredType.cpp \ H5EnumType.cpp H5IntType.cpp H5FloatType.cpp H5StrType.cpp \ H5ArrayType.cpp H5VarLenType.cpp H5CompType.cpp H5DataSet.cpp \ H5CommonFG.cpp H5Group.cpp H5File.cpp # HDF5 C++ library depends on HDF5 Library. libhdf5_cpp_la_LIBADD = $(LIBHDF5) # Public headers include_HEADERS = H5Cpp.h H5AbstractDs.h H5AtomType.h H5Attribute.h H5Classes.h \ H5CommonFG.h H5CompType.h H5DataSet.h H5DataSpace.h H5DataType.h \ H5DcreatProp.h H5DxferProp.h H5EnumType.h H5Exception.h H5FaccProp.h \ H5FcreatProp.h H5File.h H5FloatType.h H5Group.h H5IdComponent.h \ H5Include.h H5IntType.h H5Library.h H5Object.h H5PredType.h \ H5PropList.h H5StrType.h H5CppDoc.h H5ArrayType.h H5VarLenType.h # h5c++ and libhdf5.settings are generated during configure. Remove only when # distclean. DISTCLEANFILES = h5c++ libhdf5.settings # Mark this directory as part of the C++ API CXX_API = yes # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/lt_vers.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign c++/src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): h5c++: $(top_builddir)/config.status $(srcdir)/h5c++.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libhdf5_cpp.la: $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_DEPENDENCIES) $(AM_V_CXXLD)$(libhdf5_cpp_la_LINK) -rpath $(libdir) $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_LIBADD) $(LIBS) install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AbstractDs.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5ArrayType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AtomType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Attribute.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CommonFG.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CompType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSet.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSpace.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DcreatProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DxferProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5EnumType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FaccProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FcreatProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5File.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FloatType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Group.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IdComponent.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IntType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Library.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Object.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PredType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PropList.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5StrType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5VarLenType.Plo@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @am__fastdepCXX_FALSE@ $(AM_V_CXX) @AM_BACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @am__fastdepCXX_FALSE@ $(AM_V_CXX) @AM_BACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @am__fastdepCXX_FALSE@ $(AM_V_CXX) @AM_BACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(includedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(HEADERS) all-local installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-includeHEADERS install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binSCRIPTS install-libLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool mostlyclean-local pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ uninstall-libLTLIBRARIES .MAKE: check-am install-am install-strip .PHONY: CTAGS GTAGS all all-am all-local check check-TESTS check-am \ clean clean-generic clean-libLTLIBRARIES clean-libtool ctags \ distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-binSCRIPTS \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-includeHEADERS install-info install-info-am \ install-libLTLIBRARIES install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-binSCRIPTS uninstall-includeHEADERS \ uninstall-libLTLIBRARIES # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. # This tells the Makefiles that these targets are not files to be built but # commands that should be executed even if a file with the same name already # exists. .PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ build-tests check-clean check-install check-p check-s check-vfd \ install-doc lib progs tests uninstall-doc _exec_check-s _test help help: @$(top_srcdir)/bin/makehelp # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from help@hdfgroup.org. # Some C++ compilers/linkers (PGI?) create a directory named "ii_files" that # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else # in the directory (e.g., for Fortran type detection) lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # General rule for recursive cleaning targets. Like the rule above, # but doesn't require building BUILT_SOURCES. check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target # is depreciated. install-doc uninstall-doc: @echo "Nothing to be done." # clean up files generated by tests so they can be re-run. build-check-clean: $(RM) -rf $(CHECK_CLEANFILES) # run check-clean whenever mostlyclean is run mostlyclean-local: build-check-clean # check-install is just a synonym for installcheck check-install: installcheck # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: @$(MAKE) build-check-s @$(MAKE) build-check-p # Actual execution of check-s. build-check-s: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) # The dummy.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ else \ echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ fi # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ cmd=$(@:.chkexe_=);\ tname=`basename $$cmd`;\ chkname=`basename $(@:.chkexe_=.chkexe)`;\ log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ else \ echo "Testing $${tname} $(TEST_FLAGS)"; \ echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $${chkname} || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ echo "============================"; \ fi # Actual execution of check-p. build-check-p: $(LIB) $(PROGS) $(TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ fi; \ done @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: $(LIB) $(PROGS) $(TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: