# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. # # HDF5-C++ Makefile(.in) # #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/commence' file which was generated with config.status # from `./config/commence.in'. #----------------------------------------------------------------------------- #------------------------------------------------------------ -*- makefile -*- # The following section of this makefile comes from the # `./config/conclude' file which was generated with config.status # from `./config/conclude.in'. #----------------------------------------------------------------------------- SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_LIBS = @DEFAULT_LIBS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ # Include src directory AM_CPPFLAGS = -I$(top_srcdir)/src # This is our main target lib_LTLIBRARIES = libhdf5_cpp.la # Build the library statically because some compliers can only link one # dynamic library, and that's the main hdf5 library (which is much larger # than this one). libhdf5_cpp_la_LDFLAGS = -static bin_SCRIPTS = h5c++ # Source files for the library libhdf5_cpp_la_SOURCES = H5Exception.cpp H5IdComponent.cpp H5Library.cpp \ H5Attribute.cpp H5Object.cpp H5PropList.cpp H5FaccProp.cpp \ H5FcreatProp.cpp H5DcreatProp.cpp H5DxferProp.cpp H5DataType.cpp \ H5DataSpace.cpp H5AbstractDs.cpp H5AtomType.cpp H5PredType.cpp \ H5EnumType.cpp H5IntType.cpp H5FloatType.cpp H5StrType.cpp \ H5ArrayType.cpp H5VarLenType.cpp H5CompType.cpp H5DataSet.cpp \ H5CommonFG.cpp H5Group.cpp H5File.cpp # Public headers include_HEADERS = H5Cpp.h H5AbstractDs.h H5AtomType.h H5Attribute.h H5Classes.h \ H5CommonFG.h H5CompType.h H5DataSet.h H5DataSpace.h H5DataType.h \ H5DcreatProp.h H5DxferProp.h H5EnumType.h H5Exception.h H5FaccProp.h \ H5FcreatProp.h H5File.h H5FloatType.h H5Group.h H5IdComponent.h \ H5Include.h H5IntType.h H5Library.h H5Object.h H5PredType.h \ H5PropList.h H5StrType.h H5CppDoc.h H5ArrayType.h H5VarLenType.h # h5c++ and libhdf5.settings are generated during configure. Remove only when # distclean. DISTCLEANFILES = h5c++ libhdf5.settings # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) subdir = c++/src mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = h5c++ LTLIBRARIES = $(lib_LTLIBRARIES) libhdf5_cpp_la_LIBADD = am_libhdf5_cpp_la_OBJECTS = H5Exception.lo H5IdComponent.lo H5Library.lo \ H5Attribute.lo H5Object.lo H5PropList.lo H5FaccProp.lo \ H5FcreatProp.lo H5DcreatProp.lo H5DxferProp.lo H5DataType.lo \ H5DataSpace.lo H5AbstractDs.lo H5AtomType.lo H5PredType.lo \ H5EnumType.lo H5IntType.lo H5FloatType.lo H5StrType.lo \ H5ArrayType.lo H5VarLenType.lo H5CompType.lo H5DataSet.lo \ H5CommonFG.lo H5Group.lo H5File.lo libhdf5_cpp_la_OBJECTS = $(am_libhdf5_cpp_la_OBJECTS) SCRIPTS = $(bin_SCRIPTS) DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/H5AbstractDs.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5ArrayType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5AtomType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Attribute.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5CommonFG.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5CompType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5DataSet.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5DataSpace.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5DataType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5DcreatProp.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5DxferProp.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5EnumType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Exception.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FaccProp.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FcreatProp.Plo ./$(DEPDIR)/H5File.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5FloatType.Plo ./$(DEPDIR)/H5Group.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5IdComponent.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5IntType.Plo ./$(DEPDIR)/H5Library.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5Object.Plo ./$(DEPDIR)/H5PredType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5PropList.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5StrType.Plo \ @AMDEP_TRUE@ ./$(DEPDIR)/H5VarLenType.Plo CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ CXXFLAGS = @CXXFLAGS@ DIST_SOURCES = $(libhdf5_cpp_la_SOURCES) HEADERS = $(include_HEADERS) DIST_COMMON = $(include_HEADERS) Makefile.am Makefile.in h5c++.in SOURCES = $(libhdf5_cpp_la_SOURCES) all: all-am .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign c++/src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) h5c++: $(top_builddir)/config.status h5c++.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ libLTLIBRARIES_INSTALL = $(INSTALL) install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(libdir) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ p="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test -z "$dir" && dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libhdf5_cpp.la: $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_DEPENDENCIES) $(CXXLINK) -rpath $(libdir) $(libhdf5_cpp_la_LDFLAGS) $(libhdf5_cpp_la_OBJECTS) $(libhdf5_cpp_la_LIBADD) $(LIBS) binSCRIPT_INSTALL = $(INSTALL_SCRIPT) install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_SCRIPTS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f $$d$$p; then \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \ $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \ else :; fi; \ done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; for p in $$list; do \ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ rm -f $(DESTDIR)$(bindir)/$$f; \ done mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AbstractDs.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5ArrayType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5AtomType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Attribute.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CommonFG.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5CompType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSet.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataSpace.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DataType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DcreatProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5DxferProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5EnumType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Exception.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FaccProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FcreatProp.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5File.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5FloatType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Group.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IdComponent.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5IntType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Library.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5Object.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PredType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5PropList.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5StrType.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/H5VarLenType.Plo@am__quote@ distclean-depend: -rm -rf ./$(DEPDIR) .cpp.o: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(CXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< .cpp.obj: @AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(CXXCOMPILE) -c -o $@ `cygpath -w $<` .cpp.lo: @AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ @AMDEP_TRUE@ $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ $(LTCXXCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< CXXDEPMODE = @CXXDEPMODE@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: includeHEADERS_INSTALL = $(INSTALL_HEADER) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(includedir) @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ rm -f $(DESTDIR)$(includedir)/$$f; \ done ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = ../.. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(HEADERS) all-local installdirs: $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(includedir) install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-libtool distclean-tags dvi: dvi-am dvi-am: info: info-am info-am: install-data-am: install-includeHEADERS install-exec-am: install-binSCRIPTS install-libLTLIBRARIES install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \ uninstall-info-am uninstall-libLTLIBRARIES .PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \ clean-generic clean-libLTLIBRARIES clean-libtool distclean \ distclean-compile distclean-depend distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am info \ info-am install install-am install-binSCRIPTS install-data \ install-data-am install-exec install-exec-am \ install-includeHEADERS install-info install-info-am \ install-libLTLIBRARIES install-man install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool tags uninstall \ uninstall-am uninstall-binSCRIPTS uninstall-includeHEADERS \ uninstall-info-am uninstall-libLTLIBRARIES # Let automake worry about Makefiles and configure components being up-to- # date. # # # The following rules insure that the Makefile is up-to-date by rerunning # various autoconf components (although not all versions of make assume # that the makefile is implicitly a target). We use time stamp files to # keep track of the most recent update of H5config.h.in and H5config.h # because autoheader and config.status don't update the modification time # if the contents don't change. # Invoke it by "gmake reconfigure". # # Graphically, the dependencies are: # # configure.in # | | # +-----------------+ +------------+ # | | # stamp1 configure # (H5config.h.in) | # | | | # | +---------------+ +-----------+ # | | | # | config.status # | | # | +------------------+ # | | # stamp2 # (H5config.h) Makefile.in et al # | | # +------------------+ +-----------+ # | | # Makefile # # A side effect of updating stamp1 is to generate H5config.h.in and a # side effect of updating stamp2 is to generate H5config.h. When using # a version of make that doesn't treat the makefile as the initial target # the user may want to occassionally type `make Makefile' in any source # directory. # The `Makefile' target has been renamed to `reconfigure' so that the # autoconf and make depend processes do not start up automatically. # One must do `make reconfigure' explicitedly to start the process. # (When srcdir is used and if more than one machines are running, # this automatic Makefile/autoconf can get things unstable.) # #STAMP1=$(top_builddir)/config/stamp1 #STAMP2=$(top_builddir)/config/stamp2 #MAKEFILE_PARTS=$(srcdir)/Makefile.in \ # $(top_srcdir)/config/commence.am \ # $(top_srcdir)/config/conclude.am #$(STAMP1): $(top_srcdir)/configure.in # touch $(STAMP1) # -cd $(top_srcdir); autoheader #$(STAMP2): $(STAMP1) $(top_builddir)/config.status # touch $(STAMP2) # -cd $(top_builddir); \ # CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status # Automake supplies a rule to generate configure #$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) # -cd $(top_builddir); ./config.status --recheck # rerun the autoconf process if any configure components have changed. #reconfigure: $(MAKEFILE_PARTS) $(STAMP2) # -cd $(top_builddir); CONFIG_HEADERS= ./config.status # @for sub in @subdirs@ dummy; do \ # if test $$sub != dummy; then \ # -cd $$sub; $(MAKE) reconfigure; \ # fi; \ # done; #----------------------------------------------------------------------------- # The following section of this makefile comes from the middle of # `Makefile.am' from this directory. # It was generated by running automake on `Makefile.am' to create # `Makefile.in', then running `config.status' to create this Makefile. #----------------------------------------------------------------------------- # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(TESTS) lib progs tests :: @$(MAKE) build-$@ || exit 1; \ for d in X $(SUBDIRS); do \ if test $$d != X -a $$d != .; then \ (set -x; cd $$d && $(MAKE) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. install-doc uninstall-doc: @echo "Nothing to be done." # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: $(PROGS) $(TESTS) @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @for test in $(TEST_PROG) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNTEST) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ srcdir="$(srcdir)" \ $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @for test in $(TEST_SCRIPT) dummy; do \ if test $$test != dummy; then \ echo "============================"; \ if test "X$(HDF_FORTRAN)" = "Xyes"; then \ echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ elif test "X$(HDF_CXX)" = "Xyes"; then \ echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ else \ echo "Testing $$test $(TEST_FLAGS)"; \ fi; \ echo "============================"; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ /bin/sh $$test $(TEST_FLAGS) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ break; \ echo ""; \ fi; \ done; \ test $$test = dummy || false @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ HDF5_DRIVER=$$vfd $(MAKE) check; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: