# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # # Copyright by The HDF Group. # Copyright by the Board of Trustees of the University of Illinois. # All rights reserved. # # This file is part of HDF5. The full HDF5 copyright notice, including # terms governing use, modification, and redistribution, is contained in # the files COPYING and Copyright.html. COPYING can be found at the root # of the source code distribution tree; Copyright.html can be found at the # root level of an installed copy of the electronic HDF5 document set and # is linked from the top-level documents page. It can also be found at # http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have # access to either file, you may request a copy from help@hdfgroup.org. # # HDF5-C++ Makefile(.in) # VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \ $(srcdir)/H5srcdir_str.h.in $(top_srcdir)/bin/depcomp \ $(top_srcdir)/bin/test-driver check_PROGRAMS = $(am__EXEEXT_1) TESTS = $(am__EXEEXT_1) subdir = c++/test ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ $(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h \ $(top_builddir)/fortran/src/H5config_f.inc CONFIG_CLEAN_FILES = H5srcdir_str.h CONFIG_CLEAN_VPATH_FILES = am__EXEEXT_1 = testhdf5$(EXEEXT) am_testhdf5_OBJECTS = testhdf5.$(OBJEXT) dsets.$(OBJEXT) \ tattr.$(OBJEXT) tcompound.$(OBJEXT) tdspl.$(OBJEXT) \ tfile.$(OBJEXT) tfilter.$(OBJEXT) th5s.$(OBJEXT) \ tlinks.$(OBJEXT) tobject.$(OBJEXT) trefer.$(OBJEXT) \ ttypes.$(OBJEXT) tvlstr.$(OBJEXT) h5cpputil.$(OBJEXT) testhdf5_OBJECTS = $(am_testhdf5_OBJECTS) testhdf5_LDADD = $(LDADD) testhdf5_DEPENDENCIES = $(LIBH5TEST) $(LIBH5CPP) $(LIBHDF5) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent am__v_lt_1 = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src depcomp = $(SHELL) $(top_srcdir)/bin/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) AM_V_CXX = $(am__v_CXX_@AM_V@) am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) am__v_CXX_0 = @echo " CXX " $@; am__v_CXX_1 = CXXLD = $(CXX) CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) am__v_CXXLD_0 = @echo " CXXLD " $@; am__v_CXXLD_1 = SOURCES = $(testhdf5_SOURCES) DIST_SOURCES = $(testhdf5_SOURCES) am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no am__tty_colors = { \ $(am__tty_colors_dummy); \ if test "X$(AM_COLOR_TESTS)" = Xno; then \ am__color_tests=no; \ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ am__color_tests=yes; \ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ am__color_tests=yes; \ fi; \ if test $$am__color_tests = yes; then \ red=''; \ grn=''; \ lgn=''; \ blu=''; \ mgn=''; \ brg=''; \ std=''; \ fi; \ } am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__recheck_rx = ^[ ]*:recheck:[ ]* am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* # A command that, given a newline-separated list of test names on the # standard input, print the name of the tests that are to be re-run # upon "make recheck". am__list_recheck_tests = $(AWK) '{ \ recheck = 1; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ { \ if ((getline line2 < ($$0 ".log")) < 0) \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ { \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ { \ break; \ } \ }; \ if (recheck) \ print $$0; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # A command that, given a newline-separated list of test names on the # standard input, create the global log from their .trs and .log files. am__create_global_log = $(AWK) ' \ function fatal(msg) \ { \ print "fatal: making $@: " msg | "cat >&2"; \ exit 1; \ } \ function rst_section(header) \ { \ print header; \ len = length(header); \ for (i = 1; i <= len; i = i + 1) \ printf "="; \ printf "\n\n"; \ } \ { \ copy_in_global_log = 1; \ global_test_result = "RUN"; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".trs"); \ if (line ~ /$(am__global_test_result_rx)/) \ { \ sub("$(am__global_test_result_rx)", "", line); \ sub("[ ]*$$", "", line); \ global_test_result = line; \ } \ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ copy_in_global_log = 0; \ }; \ if (copy_in_global_log) \ { \ rst_section(global_test_result ": " $$0); \ while ((rc = (getline line < ($$0 ".log"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".log"); \ print line; \ }; \ printf "\n"; \ }; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # Restructured Text title. am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } # Solaris 10 'make', and several other traditional 'make' implementations, # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it # by disabling -e (using the XSI extension "set +e") if it's set. am__sh_e_setup = case $$- in *e*) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). am__check_pre = \ $(am__sh_e_setup); \ $(am__vpath_adj_setup) $(am__vpath_adj) \ $(am__tty_colors); \ srcdir=$(srcdir); export srcdir; \ case "$@" in \ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ *) am__odir=.;; \ esac; \ test "x$$am__odir" = x"." || test -d "$$am__odir" \ || $(MKDIR_P) "$$am__odir" || exit $$?; \ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ am__enable_hard_errors=yes; \ fi; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ am__expect_failure=yes;; \ *) \ am__expect_failure=no;; \ esac; \ $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) # A shell command to get the names of the tests scripts with any registered # extension removed (i.e., equivalently, the names of the test logs, with # the '.log' extension removed). The result is saved in the shell variable # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", # since that might cause problem with VPATH rewrites for suffix-less tests. # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. am__set_TESTS_bases = \ bases='$(TEST_LOGS)'; \ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ bases=`echo $$bases` RECHECK_LOGS = $(TEST_LOGS) AM_RECURSIVE_TARGETS = check recheck TEST_SUITE_LOG = test-suite.log LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) am__set_b = \ case '$@' in \ */*) \ case '$*' in \ */*) b='$*';; \ *) b=`echo '$@' | sed 's/\.log$$//'`; \ esac;; \ *) \ b='$*';; \ esac am__test_logs1 = $(TESTS:=.log) am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) TEST_LOGS = $(am__test_logs2:.sh.log=.log) SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ # H5_CFLAGS holds flags that should be used when building hdf5, # but which should not be exported to h5cc for building other programs. # AM_CFLAGS is an automake construct which should be used by Makefiles # instead of CFLAGS, as CFLAGS is reserved solely for the user to define. # This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ # Include src, test, and c++/src directories AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \ -I$(top_srcdir)/test -I$(top_srcdir)/c++/src AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_VERSION = @CC_VERSION@ CFLAGS = @CFLAGS@ CLEARFILEBUF = @CLEARFILEBUF@ CODESTACK = @CODESTACK@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CXX_VERSION = @CXX_VERSION@ CYGPATH_W = @CYGPATH_W@ DEBUG_PKG = @DEBUG_PKG@ DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ DIRECT_VFD = @DIRECT_VFD@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FCFLAGS = @FCFLAGS@ FCFLAGS_f90 = @FCFLAGS_f90@ FCLIBS = @FCLIBS@ FC_VERSION = @FC_VERSION@ FGREP = @FGREP@ FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@ FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@ FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@ FSEARCH_DIRS = @FSEARCH_DIRS@ GREP = @GREP@ H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@ H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@ H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@ H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@ H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@ H5_CFLAGS = @H5_CFLAGS@ H5_CPPFLAGS = @H5_CPPFLAGS@ H5_CXXFLAGS = @H5_CXXFLAGS@ H5_FCFLAGS = @H5_FCFLAGS@ H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ H5_LDFLAGS = @H5_LDFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HAVE_DMALLOC = @HAVE_DMALLOC@ HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@ HAVE_PTHREAD = @HAVE_PTHREAD@ HDF5_HL = @HDF5_HL@ HDF5_INTERFACES = @HDF5_INTERFACES@ HDF_CXX = @HDF_CXX@ HDF_FORTRAN = @HDF_FORTRAN@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT = @INSTRUMENT@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LL_PATH = @LL_PATH@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MPE = @MPE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@ PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@ PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@ PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@ PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@ PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@ PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@ PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@ PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@ PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@ PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@ PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@ PARALLEL = @PARALLEL@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ RANLIB = @RANLIB@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SIZE_T = @SIZE_T@ STATIC_EXEC = @STATIC_EXEC@ STATIC_SHARED = @STATIC_SHARED@ STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ STRIP = @STRIP@ TESTPARALLEL = @TESTPARALLEL@ THREADSAFE = @THREADSAFE@ TIME = @TIME@ TR = @TR@ TRACE_API = @TRACE_API@ UNAME_INFO = @UNAME_INFO@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ USINGMEMCHECKER = @USINGMEMCHECKER@ VERSION = @VERSION@ WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ac_ct_FC = @ac_ct_FC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ # Install directories that automake doesn't know about docdir = $(exec_prefix)/doc dvidir = @dvidir@ enable_shared = @enable_shared@ enable_static = @enable_static@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Shell commands used in Makefiles RM = rm -f CP = cp # Some machines need a command to run executables; this is that command # so that our tests will run. # We use RUNEXEC instead of RUNSERIAL directly because it may be that # some tests need to be run with a different command. Older versions # of the makefiles used the command # $(LIBTOOL) --mode=execute # in some directories, for instance. RUNEXEC = $(RUNSERIAL) # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la # Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below # has been removed. According to the official description of DESTDIR by Gnu at # http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is # prepended to the normal and complete install path that it precedes for the # purpose of installing in a temporary directory which is useful for building # rpms and other packages. The '/' after ${DESTDIR} will be followed by another # '/' at the beginning of the normal install path. When DESTDIR is empty the # path then begins with '//', which is incorrect and causes problems at least for # Cygwin. # Scripts used to build examples # If only shared libraries have been installed, have h5cc build examples with # shared libraries instead of static libraries H5CC = ${DESTDIR}$(bindir)/h5cc H5CC_PP = ${DESTDIR}$(bindir)/h5pcc H5FC = ${DESTDIR}$(bindir)/h5fc H5FC_PP = ${DESTDIR}$(bindir)/h5pfc H5CPP = ${DESTDIR}$(bindir)/h5c++ ACLOCAL_AMFLAGS = "-I m4" # The trace script; this is used on source files from the C library to # insert tracing macros. TRACE = perl $(top_srcdir)/bin/trace # .chkexe files are used to mark tests that have run successfully. # .chklog files are output from those tests. # *.clog and *.clog2 are from the MPE option. # Temporary files CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 tattr_multi.h5 \ tfattrs.h5 tattr_scalar.h5 tattr_compound.h5 tattr_dtype.h5 \ tattr_basic.h5 # These are our main targets. They should be listed in the order to be # executed, generally most specific tests to least specific tests. TEST_PROG = testhdf5 # The tests depend on the hdf5 library, test library, and the c++ library LDADD = $(LIBH5TEST) $(LIBH5CPP) $(LIBHDF5) testhdf5_SOURCES = testhdf5.cpp dsets.cpp tattr.cpp tcompound.cpp \ tdspl.cpp tfile.cpp tfilter.cpp th5s.cpp tlinks.cpp tobject.cpp \ trefer.cpp ttypes.cpp tvlstr.cpp h5cpputil.cpp # Tell conclude.am that these are C++ tests. CXX_API = yes # Automake needs to be taught how to build lib, progs, and tests targets. # These will be filled in automatically for the most part (e.g., # lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and # EXTRA_TEST variables are supplied to allow the user to force targets to # be built at certain times. LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_EXTENSIONS = .sh SH_LOG_COMPILER = $(SHELL) AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: .SUFFIXES: .cpp .lo .log .o .obj .sh .sh$(EXEEXT) .trs $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign c++/test/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign c++/test/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): H5srcdir_str.h: $(top_builddir)/config.status $(srcdir)/H5srcdir_str.h.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ clean-checkPROGRAMS: @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list testhdf5$(EXEEXT): $(testhdf5_OBJECTS) $(testhdf5_DEPENDENCIES) $(EXTRA_testhdf5_DEPENDENCIES) @rm -f testhdf5$(EXEEXT) $(AM_V_CXXLD)$(CXXLINK) $(testhdf5_OBJECTS) $(testhdf5_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsets.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5cpputil.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tattr.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcompound.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tdspl.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testhdf5.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfile.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tfilter.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/th5s.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlinks.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tobject.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trefer.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ttypes.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tvlstr.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags # Recover from deleted '.trs' file; this should ensure that # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells # to avoid problems with "make -n". .log.trs: rm -f $< $@ $(MAKE) $(AM_MAKEFLAGS) $< # Leading 'am--fnord' is there to ensure the list of targets does not # expand to empty, as could happen e.g. with make check TESTS=''. am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ redo_bases=`for i in $$bases; do \ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ done`; \ if test -n "$$redo_bases"; then \ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ if $(am__make_dryrun); then :; else \ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ fi; \ fi; \ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ else \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ st=0; \ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ for i in $$redo_bases; do \ test -f $$i.trs && test -r $$i.trs \ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ test -f $$i.log && test -r $$i.log \ || { echo "$$errmsg $$i.log" >&2; st=1; }; \ done; \ test $$st -eq 0 || exit 1; \ fi @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ ws='[ ]'; \ results=`for b in $$bases; do echo $$b.trs; done`; \ test -n "$$results" || results=/dev/null; \ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ if test `expr $$fail + $$xpass + $$error` -eq 0; then \ success=true; \ else \ success=false; \ fi; \ br='==================='; br=$$br$$br$$br$$br; \ result_count () \ { \ if test x"$$1" = x"--maybe-color"; then \ maybe_colorize=yes; \ elif test x"$$1" = x"--no-color"; then \ maybe_colorize=no; \ else \ echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ shift; \ desc=$$1 count=$$2; \ if test $$maybe_colorize = yes && test $$count -gt 0; then \ color_start=$$3 color_end=$$std; \ else \ color_start= color_end=; \ fi; \ echo "$${color_start}# $$desc $$count$${color_end}"; \ }; \ create_testsuite_report () \ { \ result_count $$1 "TOTAL:" $$all "$$brg"; \ result_count $$1 "PASS: " $$pass "$$grn"; \ result_count $$1 "SKIP: " $$skip "$$blu"; \ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ result_count $$1 "FAIL: " $$fail "$$red"; \ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ for b in $$bases; do echo $$b; done \ | $(am__create_global_log); \ } >$(TEST_SUITE_LOG).tmp || exit 1; \ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ if $$success; then \ col="$$grn"; \ else \ col="$$red"; \ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ fi; \ echo "$${col}$$br$${std}"; \ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ echo "$${col}$$br$${std}"; \ create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 recheck: all $(check_PROGRAMS) @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ log_list=`for i in $$bases; do echo $$i.log; done`; \ log_list=`echo $$log_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ am__force_recheck=am--force-recheck \ TEST_LOGS="$$log_list"; \ exit $$? testhdf5.log: testhdf5$(EXEEXT) @p='testhdf5$(EXEEXT)'; \ b='testhdf5'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) .sh.log: @p='$<'; \ $(am__set_b); \ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) @am__EXEEXT_TRUE@.sh$(EXEEXT).log: @am__EXEEXT_TRUE@ @p='$<'; \ @am__EXEEXT_TRUE@ $(am__set_b); \ @am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ @am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-checkPROGRAMS clean-generic clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool mostlyclean-local pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: check-am install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ check-am clean clean-checkPROGRAMS clean-generic clean-libtool \ cscopelist-am ctags ctags-am distclean distclean-compile \ distclean-generic distclean-libtool distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am # List all build rules defined by HDF5 Makefiles as "PHONY" targets here. # This tells the Makefiles that these targets are not files to be built but # commands that should be executed even if a file with the same name already # exists. .PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ build-tests check-clean check-install check-p check-s check-vfd \ install-doc lib progs tests uninstall-doc _exec_check-s _test help help: @$(top_srcdir)/bin/makehelp # Some C++ compilers/linkers (PGI?) create a directory named "ii_files" that # holds *.ii files, which are template entity instantiations. # This entire directory should be cleaned. mostlyclean-local: @if test -d ii_files; then \ $(RM) -rf ii_files; \ fi # lib/progs/tests targets recurse into subdirectories. build-* targets # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else # in the directory (e.g., for Fortran type detection) lib progs tests check-s check-p :: $(BUILT_SOURCES) @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # General rule for recursive cleaning targets. Like the rule above, # but doesn't require building BUILT_SOURCES. check-clean :: @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; @for d in X $(SUBDIRS); do \ if test $$d != X && test $$d != .; then \ (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; \ done # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. # UPDATE: docs no longer reside in this build tree, so this target # is depreciated. install-doc uninstall-doc: @echo "Nothing to be done." # clean up files generated by tests so they can be re-run. build-check-clean: $(RM) -rf $(CHECK_CLEANFILES) # run check-clean whenever mostlyclean is run mostlyclean-local: build-check-clean # check-install is just a synonym for installcheck check-install: installcheck # Run each test in order, passing $(TEST_FLAGS) to the program. # Since tests are done in a shell loop, "make -i" does apply inside it. # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # # Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test test _test: @$(MAKE) build-check-s @$(MAKE) build-check-p # Actual execution of check-s. build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) # The dummy.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ else \ echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ srcdir="$(srcdir)" \ $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $(@:.chkexe_=.chkexe) || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ fi # The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ cmd=$(@:.chkexe_=);\ tname=`basename $$cmd`;\ chkname=`basename $(@:.chkexe_=.chkexe)`;\ log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ if test "X$(FORTRAN_API)" = "Xyes"; then \ echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ elif test "X$(CXX_API)" = "Xyes"; then \ echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ else \ echo "Testing $${tname} $(TEST_FLAGS)"; \ echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ fi; \ echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ && touch $${chkname} || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ echo "============================" >> $${log}; \ echo "Finished testing $${tname} $(TEST_FLAGS)"; \ cat $${log}; \ fi; \ echo "============================"; \ fi # Actual execution of check-p. build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @if test -n "$(TEST_PROG_PARA)"; then \ echo "**** Hint ****"; \ echo "Parallel test files reside in the current directory" \ "by default."; \ echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ echo " HDF5_PARAPREFIX=/PFS/user/me"; \ echo " export HDF5_PARAPREFIX"; \ echo " make check"; \ echo "**** end of Hint ****"; \ fi @for test in $(TEST_PROG_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ RUNEXEC="$(RUNPARALLEL)" || exit 1; \ fi; \ done @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ fi; \ done @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ fi # Run test with different Virtual File Driver check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ echo "Testing Virtual File Driver $$vfd"; \ echo "============================"; \ $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ fi; \ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: