## config/conclude.am
## Textually included at the end of most HDF5 Makefiles.am.
## Contains build rules.

# Automake needs to be taught how to build lib, progs, and tests targets.
# These will be filled in automatically for the most part (e.g.,
# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
# EXTRA_TEST variables are supplied to allow the user to force targets to
# be built at certain times. 
LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
        $(EXTRA_PROG)
TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 


# lib/progs/tests targets recurse into subdirectories. build-* targets
# build files in this directory.
build-lib: $(LIB)
build-progs: $(LIB) $(PROGS)
build-tests: $(LIB) $(PROGS) $(TESTS)

lib progs tests check-s check-p ::
	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
	@for d in X $(SUBDIRS); do                                             \
	    if test $$d != X -a $$d != .; then                                \
	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
	    fi;                                                               \
	done

# Tell Automake to build tests when the user types `make all' (this is
# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
# Automake won't build them automatically, either.
all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS)

# make install-doc doesn't do anything outside of doc directory, but
# Makefiles should recognize it.
install-doc uninstall-doc:
	@echo "Nothing to be done."

# Run each test in order, passing $(TEST_FLAGS) to the program.
# Since tests are done in a shell loop, "make -i" does apply inside it.
# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
# The timestamps give a rough idea how much time the tests use.
#
# Note that targets in TESTS (defined above) will be built when the user
# types 'make tests' or 'make check', but only programs in TEST_PROG,
# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
check-TESTS: test

test _test:
	@$(MAKE) build-check-s
	@$(MAKE) build-check-p

# Actual execution of check-s.
build-check-s: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

TEST_PROG_CHKEXE=$(TEST_PROG:=.chkexe_)
TEST_PROG_PARA_CHKEXE=$(TEST_PROG_PARA:=.chkexe_)
TEST_SCRIPT_CHKSH=$(TEST_SCRIPT:=.chksh_)
TEST_SCRIPT_PARA_CHKSH=$(TEST_SCRIPT_PARA:=.chksh_)

_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)

# The .chkexe_ here is the "dummy" that prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) .chkexe_:
	@if test "X$@" != "X.chkexe_"; then \
	  echo "============================"; \
	  if test -e $(@:.chkexe_=.chkexe) && \
	          test $(@:.chkexe_=.chkexe) -nt $(@:.chkexe_=)$(EXEEXT); then \
	    echo "No need to test $(@:.chkexe_=)$(EXEEXT) again."; \
	  else \
	    if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	      echo "Fortran API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
	    elif test "X$(HDF_CXX)" = "Xyes"; then \
	      echo "C++ API: Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
	    else \
	      echo "Testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
	    fi; \
	    echo "============================"; \
	    srcdir="$(srcdir)" \
	      $(RUNTESTS) ./$(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS) \
	      && touch $(@:.chkexe_=.chkexe) || \
	      (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	      exit 1; \
	    echo ""; \
	    echo "Finished testing $(@:.chkexe_=)$(EXEEXT) $(TEST_FLAGS)"; \
	  fi; \
	  echo "============================"; \
	fi
 
# The .chksh_ here is the "dummy" that prevents the target from being
# empty if there are no tests in the current directory.
$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) .chksh_:
	@if test "X$@" != "X.chksh_"; then \
	  echo "============================"; \
	  if test -e $(@:.chksh_=.chksh) && \
	          test $(@:.chksh_=.chksh) -nt $(@:.chksh_=); then \
	    echo "No need to test $(@:.chksh_=) again."; \
	  else \
	    if test "X$(HDF_FORTRAN)" = "Xyes"; then \
	      echo "Fortran API: Testing $(@:.chksh_=) $(TEST_FLAGS)"; \
	    elif test "X$(HDF_CXX)" = "Xyes"; then \
	      echo "C++ API: Testing $(@:.chksh_=) $(TEST_FLAGS)"; \
	    else \
	      echo "Testing $(@:.chksh_=) $(TEST_FLAGS)"; \
	    fi; \
	    echo "============================"; \
	    RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
	    srcdir="$(srcdir)" \
	      $(SHELL) ./$(@:.chksh_=) $(TEST_FLAGS) \
	      && touch $(@:.chksh_=.chksh) || \
	      (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
	      exit 1; \
	    echo ""; \
	    echo "Finished testing $(@:.chksh_=) $(TEST_FLAGS)"; \
	  fi; \
	  echo "============================"; \
	fi

# Actual execution of check-p.
build-check-p: $(LIB) $(PROGS) $(TESTS)
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
	fi
	@if test -n "$(TEST_PROG_PARA)"; then                                \
	    echo "**** Hint ****";                                            \
	    echo "Parallel test files reside in the current directory"        \
	         "by default.";                                               \
	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
	    echo "    export HDF5_PARAPREFIX";                                \
	    echo "    make check";                                            \
	    echo "**** end of Hint ****";                                     \
	fi
	@for test in $(TEST_PROG_PARA) dummy; do                             \
	   if test $$test != dummy; then                                      \
	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
	      RUNTESTS="$(RUNPARALLEL)"; \
	   fi;                                                                \
	done;                                                                 \
	test $$test = dummy || false
	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
	  if test $$test != dummy; then                                      \
	    $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \
	  fi;                                                                 \
	done;                                                                 \
	test $$test = dummy || false
	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
	fi

# Run test with different Virtual File Driver
check-vfd:
	@for vfd in $(VFD_LIST) dummy; do                                     \
	    if test $$vfd != dummy; then                                      \
	        echo "============================";                          \
	        echo "Testing Virtual File Driver $$vfd";                     \
	        echo "============================";                          \
	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check;              \
	    fi;                                                               \
	done