HDF5 version 1.6.4-snap3 released on Sun Jan 2 18:24:47 CST 2005 ================================================================================ INTRODUCTION This document describes the differences between HDF5-1.6.3 and HDF5-1.6.3-*, and contains information on the platforms tested and known problems in HDF5-1.6.3-*. For more details check the HISTORY.txt file in the HDF5 source. The HDF5 documentation can be found on the NCSA ftp server (ftp.ncsa.uiuc.edu) in the directory: /HDF/HDF5/docs/ For more information look at the HDF5 home page at: http://hdf.ncsa.uiuc.edu/HDF5/ If you have any questions or comments, please send them to: hdfhelp@ncsa.uiuc.edu CONTENTS - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.6.3 - Documentation - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Library: -------- - Compound datatype has been enhanced with a new feature of size adjustment. The size can be increased and decreased(without cutting the last member). No API change is involved. SLU - 2004/10/1 Parallel Library: ----------------- - Allow compressed, chunked datasets to be read in parallel. QAK - 2004/10/04 Tools: ------ - New tool, h5jam. See reference manual. 2004/10/08 F90 API: -------- C++ API: -------- Support for new platforms, languages and compilers. ======================================= Bug Fixes since HDF5-1.6.3 release ================================== Library ------- - Fix segmentation fault when calling H5Fflush with an attribute that hasn't had a value written to it open. QAK - 2004/10/18 - Back up supporting bitfield and time types in H5Tget_native_type. Leave it to future support. The function simply returns error message of "not support" for bitfield and time types. SLU - 2004/10/5 - Fixed address check in Core VFL driver to avoid spurious address/size overflows for odd valued addresses and/or sizes. QAK - 2004/09/27 - Fixed problem where chunked datasets were not able to be deleted from a file under certain circumstances. QAK - 2004/09/27/ Configuration ------------- - IRIX64 MIPSpro compiler of 7.4.x supports C99 features. Default to use the 'c99' compiler if available. AKC - 2004/12/13 - Intel v8.0 compiler would infinite loop when compiling some test code with -O3 option. Changed enable-production default compiler option to -O2. AKC - 2004/12/06 - Long double is assumed to be a supported C data type. It is a stanadard C89 type. AKC - 2004/10/22 Performance ------------- Tools ----- - Fixed h5dump to print attributes data in ASCII if -r option is used. AKC - 2004/11/18 - Fixed space utilization reported in h5ls to correct error in formula used. QAK - 2004/10/22 Documentation ------------- F90 API ------- - on windows, previously Fortran DLL built and tested failed, now Fortran DLL has been built and tested successfully with Dec Fortran 6.6c or Dec Fortran 6.0. C++ API ------- Documentation ============= HDF5 Library documentation -------------------------- Windows installation documentation ---------------------------------- Platforms Tested ================ AIX 5.1 (32 and 64-bit) xlc 6.0.0.6 xlf 8.1.1.3 xlC 6.0.0.6 mpcc_r 6.0.0.6 mpxlf_r 8.1.1.3 xlc 5.0.2.5 xlf 7.1.1.2 xlC 5.0.2.5 mpcc_r 5.0.2.5 mpxlf_r 7.1.1.2 AIX 5.2 xlc 6.0.0.8 xlC 6.0.0.8 xlf 8.1.1.6 mpcc_r 6.0.0.8 mpxlf_r 8.1.1.6 Cray T90 sn7001 10.0.0md Cray Standard C Version 6.4.0.3 Cray Fortran Version 3.4.0.0 Cray T3E sn6606 2.0.6.08 Cray Standard C Version 6.6.0.3 Cray Fortran Version 3.6.0.3 Cray SV1 sn9617 10.0.1.2 Cray Standard C Version 6.6.0.3.6 Cray Fortran Version 3.6.0.3.1 FreeBSD 4.9 gcc 2.95.4 g++ 2.95.4 HP-UX B.11.00 HP C HP92453-01 A.11.01.20 HP F90 v2.4 HP ANSI C++ B3910B A.03.13 MPIch 1.2.4 IRIX64 6.5 (64 & n32) MIPSpro cc 7.3.1.3m F90 MIPSpro 7.3.1.3m (64 only) C++ MIPSpro cc 7.3.1.3m mpt 1.6 Linux 2.4.18 gcc 2.96, 3.3.2 g++ 3.3.2 Intel(R) C++ Version 7.1 Intel(R) Fortran Compiler Version 7.1 PGI compilers (pgcc, pgf90, pgCC) version 5.0-2 MPIch 1.2.4 Absoft Fortran compiler v9.0 Linux 2.4.20-8 gcc 3.3.2 PGI compilers (pgcc, pgf90, pgCC) version 5.0-2 MPIch 1.2.4 Linux 2.4.21-2.9.5ws #3 gcc 3.2.3 (Red Hat Linux 3.2.3-16) SMP x86_64 g++ 3.2.3 Linux 2.4.21-4.ELsmp Intel(R) C++ 32-bit Version 8.0 Intel(R) Fortran 32-bit Version 8.0 gcc 3.4.0 MPICH 1..5.2 Inmel 8.0 Linux 2.4.19-SMP x86_64 gcc (GCC) 3.2.2 (SuSE Linux) g++ 3.2.2 Linux 2.6.4-52smp x86_64 gcc 3.3.3 (SuSE Linux 9.1 AMD64)) PGI 5.2-1 C and F90 Linux 2.4.21-sgi Altix SMP ia64 Intel(R) C++ Version 8.0 Intel(R) Fortran Itanium(R) Version 8.0 SGI MPI OSF1 V5.1 Compaq C V6.5-303 HP Fortran V5.5A-3548 Compaq C++ V6.5-040 MPI_64bit_R13 SunOS 5.7(32 and 64 bit) WorkShop Compilers 5.0 98/12/15 C 5.0 (Solaris 2.7) WorkShop Compilers 5.0 98/12/15 C++ 5.0 WorkShop Compilers 5.0 98/10/25 FORTRAN 90 2.0 Patch 107356-04 SunOS 5.8(32 and 64 bit) Sun WorkShop 6 update 2 C 5.3 (Solaris 2.8) Sun WorkShop 6 update 2 Fortran 90 Sun WorkShop 6 update 2 C++ 5.3 TFLOPS r1.0.4 v4.4.3 i386 pgcc Rel 3.1-4i with mpich-1.2.4 with local modifications IA-32 Linux 2.4.18 gcc 2.96 Intel(R) C++ Version 7.0 Intel(R) Fortran Compiler Version 7.0 Xeon Linux 2.4.20-31.9smp_perfctr_lustre Intel(R) C++ Version 8.0 Intel(R) Fortran Compiler Version 8.0 IA-64 Linux 2.4.16 ia64 gcc version 3.0.4 Intel(R) C++ Version 7.1 Intel(R) Fortran Compiler Version 7.1 IA-64 Linux 2.4.21.SuSE_128.bef1 ia64 Intel(R) C++ Version 8.0 Intel(R) Fortran Compiler Version 8.0 mpich-gm-1.2.5..intel Windows 2000 (NT5.0) MSVC++ 6.0 MSVC++ .NET DEC Visual Fortran 6.0 Intel C and F90 compilers version 7.1 Code Warrior 8.0 Windows XP MSVC++.NET MSVC++ 6.0 DEC Visual Fortran 6.0 MAC OS X Darwin 7.5 gcc and g++ Apple Computer, Inc. GCC version 1175, based on gcc version 3.3.2 IBM XL Fortran version 8.1 Absoft Fortran compiler v8.2 Supported Configuration Features Summary ======================================== Key: y = tested and supported n = not supported or not tested in this release x = not working in this release dna = does not apply ( ) = footnote appears below second table Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.7 64-bit y (1) y y (1) y y y Solaris2.7 32-bit y (1) y y (1) y y y Solaris2.8 64-bit y (1) y y (1) y y y Solaris2.8 32-bit y y y (1) y y y IRIX64_6.5 64-bit y (2) y y y y y IRIX64_6.5 32-bit y (2) n n n y y HPUX11.00 y (1) y y y y y OSF1 v5.1 y y y y y y T90 IEEE n y n n y n T3E y (5) y y (5) n y n SV1 y (5) y y (5) n y n TFLOPS y (1) n n n y n AIX-5.1 & 5.2 32-bit y y y y y y AIX-5.1 & 5.2 64-bit y y y y y y WinXP Visual Studio 6.0 n y (9) n y y y WinXP .Net n n n y y y WinXP Code Warrior n n n n y y Win2000 Visual Studio 6.0 n y (10) n y y y Win2000 Visual Studio Intel (6) n y n y y y Win2000 .Net n n n y y y Mac OS X 10.3 n y (11) n y y y FreeBSD 4.9 y (1) n n y y y RedHat 7 W (3) y (1) y (12) n y y y RedHat 7.3 W Intel (3) n y n y y y RedHat 7.3 W PGI (3) n y n y y y RedHat 8 & SuSe x86_64 gcc (3) n y (13) n y y y Linux 2.4 Xeon C Lustre Intel (3,7) n y n y y y Linux 2.4 SuSE ia64 C Intel (3,8) y y y y y y Linux 2.4 SGI Altix ia64 Intel (3) y y y y y y Platform Shared static- Thread- STREAM- libraries (4) exec safe VFD Solaris2.7 64-bit y x y y Solaris2.7 32-bit y x y y Solaris2.8 64-bit y x y y Solaris2.8 32-bit y x y y IRIX64_6.5 64-bit y y y y IRIX64_6.5 32-bit y y y y HPUX11.00 y x n y OSF1 v5.1 y y n y T90 IEEE n y n y T3E n y n y SV1 n y n y TFLOPS n y n n AIX-5.1 & 5.2 32-bit n y n y AIX-5.1 & 5.2 64-bit n y n y WinXP Visual Studio 6.0 y y n n WinXP .Net y y n n WinXP Code Warrior n y n n Win2000 Visual Studio 6.0 y y n n Win2000 Visual Studio Intel (6) y y n n Win2000 .Net y y n n Mac OS X 10.3 y y n y FreeBSD 4.9 y y y y RedHat 7 W (3) y y y y RedHat 7.3 W Intel (3) n y n y RedHat 7.3 W PGI (3) n y n y RedHat 8 & SuSe x86_64 gcc (3) n y n y Linux 2.4 Xeon C Lustre Intel (3,7) y y n y Linux 2.4 SuSE ia64 C Intel (3,8) y y n n Linux 2.4 SGI Altix ia64 Intel (3) y y n y Compiler versions for each platform are listed in the "Platforms Tested" table found elsewhere in this file (RELEASE.txt). Unless otherwise noted, compilers used are the system compilers. Footnotes: (1) Using mpich 1.2.4 (2) Using mpt and mpich 1.2.4 (3) Linux 2.4 with GNU, Intel, and PGI compilers, as indicated W or C indicates workstation or cluster, respectively (4) Shared libraries are provided only for the C library, except on Windows where they are provided for C and C++ (5) Using mpt (6) Intel 7.1 compilers in Visual Studio 6.0 environment (7) Linux 2.4.20-31.9. Xeon cluster with smp_perfctr_lustre and Intel compilers (8) Linux 2.4.21, SuSE_128.befl. Ia64 cluster with Intel compilers (9) DEC Visual Fortran 6.0 and Intel 7.1 (10) DEC Visual Fortran 6.0 (11) IBM XLF and Absoft (12) PGI, Absoft (13) PGI FMB/EIP - 2004/09/21 Known Problems ============== * Newer SGI MIPSpro compilers (version 7.4.x) support C99 features but it has a "guard" statement in stdint.h that will #error and skip the rest of the header file if C99 option is not used explicitely. Hardset $CC to c99 will resolve the problem. AKC - 2004/12/13 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command poe. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use". HDF5 does not use sockets (except for stream-VFD). This is due to problems of the poe command trying to set up the debug socket. Check if there are many old /tmp/s.pedb.* staying around. These are sockets used by the poe command and left behind due to failed commands. Ask your system administrator to clean them out. Lastly, request IBM to provide a mean to run poe without the debug socket. * h5fc and h5c++ compilation scripts have a bug: object files (*.o) cannot be created when source code is compiled using h5fc or h5c++. We will provide a fix. Please check ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/current/src/patches/ for the patches. * Fortran subroutine h5pget_driver_f doesn't return a correct driver information. * There are two h5dump xml tests(h5dump --xml thlink.h5 and h5dump --xml tmany.h5) failed on windows xp with .NET for debug and debug dll. Release and Release dll work fine. * The h5dump tests may fail to match the expected output on some platforms (e.g. parallel jobs, Windows) where the error messages directed to "stderr" do not appear in the "right order" with output from stdout. This is not an error. * The stream-vfd test uses ip port 10007 for testing. If another application is already using that port address, the test will hang indefinitely and has to be terminated by the kill command. To try the test again, change the port address in test/stream_test.c to one not being used in the host. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platform for the serial mode. The parallel mode works fine with this option. It is suggested that you don't use this option on these platforms during configuration. * The Stream VFD was not tested yet under Windows. It is not supported in the TFLOPS machine. * The ./dsets tests failed in the TFLOPS machine if the test program, dsets.c, is compiled with the -O option. The hdf5 library still works correctly with the -O option. The test program works fine if it is compiled with -O1 or -O0. Only -O (same as -O2) causes the test program to fail. * Certain platforms give false negatives when testing h5ls: - Cray J90 and Cray T90IEEE give errors during testing when displaying some floating-point values. These are benign differences due to the different precision in the values displayed and h5ls appears to be dumping floating-point numbers correctly. * Before building HDF5 F90 Library from source on Crays replace H5Aff.f90, H5Dff.f90 and H5Pff.f90 files in the fortran/src subdirectory in the top level directory with the Cray-specific files from the site: ftp://ftp.ncsa.uiuc.edu/HDF/HDF5/current/src/patches/ * On some platforms that use Intel and Absoft compilers to build HDF5 fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90 complaining about exit subroutine. Comment out the line IF (total_error .ne. 0) CALL exit (total_error) * On IA32 and IA64 systems, if you use a compiler other than GCC (such as Intel's ecc or icc compilers), you will need to modify the generated "libtool" program after configuration is finished. On or around line 104 of the libtool file, there are lines which look like: # How to pass a linker flag through the compiler. wl="" change these lines to this: # How to pass a linker flag through the compiler. wl="-Wl," UPDATE: This is now done automatically by the configure script. However, if you still experience a problem, you may want to check this line in the libtool file and make sure that it has the correct value. * Information about building with PGI and Intel compilers is available in INSTALL file sections 5.7 and 5.8 * In LANL QSC, the new cc compiler has problems converting small values of long long (absolute values less than 1**-308) to double. This triggers the test/dtypes to report failure in the Testing random sw long double -> double conversions If -ieee is used, the converted doubles spread over the range 0.0 to 1**-308. If -ieee is not used, the converted double values are mostly 0.0 but occasionally as 1**-308. This has been reported to the system staff. All other tests have passed. * On at least one system, (SDSC DataStar), the scheduler (in this case LoadLeveler) sends job status updates to standard error when you run any executable that was compiled with the parallel compilers. This causes problems when running "make check" on parallel builds, as many of the tool tests function by saving the output from test runs, and comparing it to an exemplar. The best solution is to reconfigure the target system so it no longer inserts the extra text. However, this may not be practical. In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to the configure and build. This will cause "make check" to continue after detecting errors in the tool tests. However, in the case of SDSC DataStar, it also leaves you with some 150 "failed" tests to examine by hand. A second solution is to write a script to run serial tests and filter out the text added by the scheduler. A sample script used on SDSC DataStar is given below, but you will probably have to customize it for your installation. Observe that the basic idea is to insert the script as the first item on the command line which executes the test. The script then executes the test and filters out the offending text before passing it on. #!/bin/csh set STDOUT_FILE=~/bin/serial_filter.stdout set STDERR_FILE=~/bin/serial_filter.stderr rm -f $STDOUT_FILE $STDERR_FILE ($* > $STDOUT_FILE) >& $STDERR_FILE set RETURN_VALUE=$status cat $STDOUT_FILE tail +3 $STDERR_FILE exit $RETURN_VALUE You get the HDF make files and test scripts to execute your filter script by setting the environment variable "RUNSERIAL" to the full path of the script prior to running configure for parallel builds. Remember to "unsetenv RUNSERIAL" before running configure for a serial build. Note that the RUNSERIAL environment variable exists so that we can can prefix serial runs as necessary on the target system. On DataStar, no prefix is necessary. However on an MPICH system, the prefix might have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to get the serial tests to run at all. In such cases, you will have to include the regular prefix in your filter script.