HDF5 documents and links 
Introduction to HDF5 
HDF5 User Guide 
And in this document, the HDF5 Reference Manual  
H5   H5A   H5D   H5E   H5F   H5G   H5I   H5P  
H5R   H5S   H5T   H5Z   Tools   Datatypes  

H5E: Error Interface

Error API Functions

These functions provide error handling capabilities in the HDF5 environment.

The C Interfaces:
             

Alphabetical Listing
             

The FORTRAN90 Interfaces:
In general, each FORTRAN90 subroutine performs exactly the same task as the corresponding C function.
             

The Error interface provides error handling in the form of a stack. The FUNC_ENTER() macro clears the error stack whenever an interface function is entered. When an error is detected, an entry is pushed onto the stack. As the functions unwind, additional entries are pushed onto the stack. The API function will return some indication that an error occurred and the application can print the error stack.

Certain API functions in the H5E package, such as H5Eprint, do not clear the error stack. Otherwise, any function which does not have an underscore immediately after the package name will clear the error stack. For instance, H5Fopen clears the error stack while H5F_open does not.

An error stack has a fixed maximum size. If this size is exceeded then the stack will be truncated and only the inner-most functions will have entries on the stack. This is expected to be a rare condition.

Each thread has its own error stack, but since multi-threading has not been added to the library yet, this package maintains a single error stack. The error stack is statically allocated to reduce the complexity of handling errors within the H5E package.


Name: H5Eclear
Signature:
herr_t H5Eclear(void)
Purpose:
Clears the error stack for the current thread.
Description:
H5Eclear clears the error stack for the current thread.

The stack is also cleared whenever an API function is called, with certain exceptions (for instance, H5Eprint).

H5Eclear can fail if there are problems initializing the library.

Parameters:
None
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface: h5eclear_f
SUBROUTINE h5eclear_f(hdferr) 
  IMPLICIT NONE
  INTEGER, INTENT(OUT) :: hdferr  ! Error code

END SUBROUTINE h5eclear_f
	

Name: H5Eget_auto
Signature:
herr_t H5Eget_auto(H5E_auto_t * func, void **client_data )
Purpose:
Returns the current settings for the automatic error stack traversal function and its data.
Description:
H5Eget_auto returns the current settings for the automatic error stack traversal function, func, and its data, client_data. Either (or both) arguments may be null in which case the value is not returned.
Parameters:
H5E_auto_t * func
OUT: Current setting for the function to be called upon an error condition.
void **client_data
OUT: Current setting for the data passed to the error function.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface:
None.

Name: H5Eget_major
Signature:
const char * H5Eget_major(H5E_major_t n)
Purpose:
Returns a character string describing an error specified by a major error number.
Description:
Given a major error number, H5Eget_major returns a constant character string that describes the error.
Parameters:
H5E_major_t n
IN: Major error number.
Returns:
Returns a character string describing the error if successful. Otherwise returns "Invalid major error number."
Fortran90 Interface: h5eget_major_f
SUBROUTINE h5eget_major_f(error_no, name, hdferr)
  INTEGER, INTENT(IN) :: error_no         !Major error number
  CHARACTER(LEN=*), INTENT(OUT) :: name   ! File name
  INTEGER, INTENT(OUT) :: hdferr          ! Error code

END SUBROUTINE h5eget_major_f
	

Name: H5Eget_minor
Signature:
const char * H5Eget_minor(H5E_minor_t n)
Purpose:
Returns a character string describing an error specified by a minor error number.
Description:
Given a minor error number, H5Eget_minor returns a constant character string that describes the error.
Parameters:
H5E_minor_t n
IN: Minor error number.
Returns:
Returns a character string describing the error if successful. Otherwise returns "Invalid minor error number."
Fortran90 Interface: h5eget_minor_f
SUBROUTINE h5eget_minor_f(error_no, name, hdferr)
  INTEGER, INTENT(IN) :: error_no         !Major error number
  CHARACTER(LEN=*), INTENT(OUT) :: name   ! File name
  INTEGER, INTENT(OUT) :: hdferr          ! Error code

END SUBROUTINE h5eget_minor_f
	

Name: H5Eprint
Signature:
herr_t H5Eprint(FILE * stream)
Purpose:
Prints the error stack in a default manner.
Description:
H5Eprint prints the error stack on the specified stream, stream. Even if the error stack is empty, a one-line message will be printed:
     HDF5-DIAG: Error detected in thread 0.

H5Eprint is a convenience function for H5Ewalk with a function that prints error messages. Users are encouraged to write their own more specific error handlers.

Parameters:
FILE * stream
IN: File pointer, or stderr if NULL.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface: h5eprint_f
SUBROUTINE h5eprint_f(hdferr, name)
  CHARACTER(LEN=*), OPTIONAL, INTENT(IN) :: name ! File name
  INTEGER, INTENT(OUT) :: hdferr                 ! Error code

END SUBROUTINE h5eprint_f
	

Name: H5Epush
Signature:
herr_t H5Epush( const char *file, const char *func, unsigned line, H5E_major_t maj_num, H5E_minor_t min_num, const char *str )
Purpose:
Pushes new error record onto error stack.
Description:
H5Epush pushes a new error record onto the error stack for the current thread.

The error has major and minor numbers maj_num and min_num, the function func where the error was detected, the name of the file file where the error was detected, the line line within that file, and an error description string str.

The function name, file name, and error description strings must be statically allocated.

Parameters:
const char *file,
IN: Name of the file in which the error was detected.
const char *func,
IN: Name of the function in which the error was detected.
unsigned line,
IN: Line within the file at which the error was detected.
H5E_major_t maj_num,
IN: Major error number.
H5E_minor_t min_num,
IN: Minor error number.
const char *str
IN: Error description string.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface:
None.

Name: H5Eset_auto
Signature:
herr_t H5Eset_auto(H5E_auto_t func, void *client_data )
Purpose:
Turns automatic error printing on or off.
Description:
H5Eset_auto turns on or off automatic printing of errors. When turned on (non-null func pointer), any API function which returns an error indication will first call func, passing it client_data as an argument.

When the library is first initialized the auto printing function is set to H5Eprint (cast appropriately) and client_data is the standard error stream pointer, stderr.

Automatic stack traversal is always in the H5E_WALK_DOWNWARD direction.

Parameters:
H5E_auto_t func
IN: Function to be called upon an error condition.
void *client_data
IN: Data passed to the error function.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface: h5eset_auto_f
SUBROUTINE h5eset_auto_f(printflag, hdferr)
  INTEGER, INTENT(IN) :: printflag  !flag to turn automatic error
                                    !printing on or off
                                    !possible values are:
                                    !printon (1)
                                    !printoff(0)
  INTEGER, INTENT(OUT) :: hdferr    ! Error code

END SUBROUTINE h5eset_auto_f
	

Name: H5Ewalk
Signature:
herr_t H5Ewalk(H5E_direction_t direction, H5E_walk_t func, void * client_data )
Purpose:
Walks the error stack for the current thread, calling a specified function.
Description:
H5Ewalk walks the error stack for the current thread and calls the specified function for each error along the way.

direction determines whether the stack is walked from the inside out or the outside in. A value of H5E_WALK_UPWARD means begin with the most specific error and end at the API; a value of H5E_WALK_DOWNWARD means to start at the API and end at the inner-most function where the error was first detected.

func will be called for each error in the error stack. Its arguments will include an index number (beginning at zero regardless of stack traversal direction), an error stack entry, and the client_data pointer passed to H5E_print. The H5E_walk_t prototype is as follows:

typedef herr_t (*H5E_walk_t)(int n, H5E_error_t *err_desc, void *client_data)

where the parameters have the following meanings:

int n
Indexed position of the error in the stack.
H5E_error_t *err_desc
Pointer to a data structure describing the error. (This structure is currently described only in the source code file hdf5/src/H5Epublic.h. That file also contains the definitive list of major and minor error codes. That information will eventually be presented as an appendix to this Reference Manual.)
void *client_data
Pointer to client data in the format expected by the user-defined function.

H5Ewalk can fail if there are problems initializing the library.

Parameters:
H5E_direction_t direction
IN: Direction in which the error stack is to be walked.
H5E_walk_t func
IN: Function to be called for each error encountered.
void * client_data
IN: Data to be passed with func.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface:
None.

Name: H5Ewalk_cb
Signature:
herr_t H5Ewalk_cb(int n, H5E_error_t *err_desc, void *client_data )
Purpose:
Default error stack traversal callback function that prints error messages to the specified output stream.
Description:
H5Ewalk_cb is a default error stack traversal callback function that prints error messages to the specified output stream. It is not meant to be called directly but rather as an argument to the H5Ewalk function. This function is called also by H5Eprint. Application writers are encouraged to use this function as a model for their own error stack walking functions.

n is a counter for how many times this function has been called for this particular traversal of the stack. It always begins at zero for the first error on the stack (either the top or bottom error, or even both, depending on the traversal direction and the size of the stack).

err_desc is an error description. It contains all the information about a particular error.

client_data is the same pointer that was passed as the client_data argument of H5Ewalk. It is expected to be a file pointer (or stderr if NULL).

Parameters:
int n
IN/OUT: Number of times this function has been called for this traversal of the stack.
H5E_error_t *err_desc
OUT: Error description.
void *client_data
IN: A file pointer, or stderr if NULL.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface:
None.

HDF5 documents and links 
Introduction to HDF5 
HDF5 User Guide 
And in this document, the HDF5 Reference Manual  
H5   H5A   H5D   H5E   H5F   H5G   H5I   H5P  
H5R   H5S   H5T   H5Z   Tools   Datatypes  

HDF Help Desk
Describes HDF5 Release 1.6.0, July 2003