Introduction to HDF5 
HDF5 User Guide 
Other HDF5 documents and links 
And in this document, the HDF5 Reference Manual  
H5   H5A   H5D   H5E   H5F   H5G   H5I  
H5P   H5R   H5RA   H5S   H5T   H5Z   Tools  

H5F: File Interface

File API Functions

These functions are designed to provide file-level access to HDF5 files. Further manipulation of objects inside a file is performed through one of APIs documented below.
             

Name: H5Fopen
Signature:
hid_t H5Fopen(const char *name, unsigned flags, hid_t access_id )
Purpose:
Opens an existing file.
Description:
H5Fopen opens an existing file and is the primary function for accessing existing HDF5 files.

The parameter access_id is a file access property list identifier or H5P_DEFAULT for the default I/O access parameters.

The flags argument determines whether writing to an existing file will be allowed or not. The file is opened with read and write permission if flags is set to H5F_ACC_RDWR. All flags may be combined with the bit-wise OR operator (`|') to change the behavior of the file open call. The more complex behaviors of a file's access are controlled through the file-access property list.

Files which are opened more than once return a unique identifier for each H5Fopen() call and can be accessed through all file identifiers.

The return value is a file identifier for the open file and it should be closed by calling H5Fclose() when it is no longer needed.

Parameters:
const char *name
Name of the file to access.
unsigned flags
File access flags. See the H5Fcreate parameters list for a list of possible values.
hid_t access_id
Identifier for the file access properties list.
Returns:
Returns a file identifier if successful; otherwise returns a negative value.

Name: H5Fcreate
Signature:
hid_t H5Fcreate(const char *name, unsigned flags, hid_t create_id, hid_t access_id )
Purpose:
Creates HDF5 files.
Description:
H5Fcreate is the primary function for creating HDF5 files .

The flags parameter determines whether an existing file will be overwritten. All newly created files are opened for both reading and writing. All flags may be combined with the bit-wise OR operator (`|') to change the behavior of the H5Fcreate call.

The more complex behaviors of file creation and access are controlled through the file-creation and file-access property lists. The value of H5P_DEFAULT for a property list value indicates that the library should use the default values for the appropriate property list. Also see H5Fpublic.h for the list of supported flags.

Parameters:
const char *name
Name of the file to access.
uintn flags
File access flags. Possible values include:
    H5F_ACC_RDWR
    Allow read and write access to file.
    H5F_ACC_RDONLY
    Allow read-only access to file.
    H5F_ACC_TRUNC
    Truncate file, if it already exists, erasing all data previously stored in the file.
    H5F_ACC_EXCL
    Fail if file already exists.
    H5F_ACC_DEBUG
    Print debug information.
    H5P_DEFAULT
    Apply default file access and creation properties.
hid_t create_id
File creation property list identifier, used when modifying default file meta-data.
hid_t access_id
File access property list identifier. If parallel file access is desired, this is a collective call according to the communicator stored in the access_id. Use 0 for default access properties.
Returns:
Returns a file identifier if successful; otherwise returns a negative value.

Name: H5Fflush
Signature:
herr_t H5Fflush(hid_t object_id, H5F_scope_t scope )
Purpose:
Flushes all buffers associated with a file to disk.
Description:
H5Fflush causes all buffers associated with a file to be immediately flushed to disk without removing the data from the cache.

object_id can be any object associated with the file, including the file itself, a dataset, a group, an attribute, or a named data type.

scope specifies whether the scope of the flushing action is global or local. Valid values are

H5F_SCOPE_GLOBAL      Flushes the entire virtual file.
H5F_SCOPE_LOCAL Flushes only the specified file.
Parameters:
const char *object_id
Identifier of object used to identify the file.
H5F_scope_t scope
Specifies the scope of the flushing action.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.

Name: H5Fis_hdf5
Signature:
hbool_t H5Fis_hdf5(const char *name )
Purpose:
Determines whether a file is in the HDF5 format.
Description:
H5Fis_hdf5 determines whether a file is in the HDF5 format.
Parameters:
const char *name
File name to check format.
Returns:
Returns TRUE or FALSE if successful. Otherwise returns a negative value.

Name: H5Fget_create_plist
Signature:
hid_t H5Fget_create_plist(hid_t file_id )
Purpose:
Returns a file creation property list identifier.
Description:
H5Fget_create_plist returns a file creation property list identifier identifying the creation properties used to create this file. This function is useful for duplicating properties when creating another file.

See "File Creation Properties" in H5P: Property List Interface in this reference manual and "File Creation Properties" in Files in the HDF5 User's Guide for additional information and related functions.

Parameters:
hid_t file_id
Identifier of the file to get creation property list of
Returns:
Returns a file creation property list identifier if successful; otherwise returns a negative value.

Name: H5Fget_access_plist
Signature:
hid_t H5Fget_access_plist(hid_t file_id)
Purpose:
Returns a file access property list identifier.
Description:
H5Fget_access_plist returns the file access property list identifier of the specified file.

See "File Access Properties" in H5P: Property List Interface in this reference manual and "File Access Property Lists" in Files in the HDF5 User's Guide for additional information and related functions.

Parameters:
hid_t file_id
Identifier of file to get access property list of
Returns:
Returns a file access property list identifier if successful; otherwise returns a negative value.

Name: H5Fclose
Signature:
herr_t H5Fclose(hid_t file_id )
Purpose:
Terminates access to an HDF5 file.
Description:
H5Fclose terminates access to an HDF5 file. If this is the last file identifier open for a file and if access identifiers are still in use, this function will fail.
Parameters:
hid_t file_id
Identifier of a file to terminate access to.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.

Name: H5Fmount
Signature:
herr_t H5Fmount(hid_t loc_id, const char *name, hid_t child_id, hid_t plist_id )
Purpose:
Mounts a file.
Description:
H5Fmount mounts the file specified by child_id onto the group specified by loc_id and name using the mount properties plist_id.
Parameters:
hid_t loc_id
The identifier for the group onto which the file specified by child_id is to be mounted.
const char *name
The name of the group onto which the file specified by child_id is to be mounted.
hid_t child_id
The identifier of the file to be mounted.
hid_t plist_id
The identifier of the property list to be used.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.

Name: H5Funmount
Signature:
herr_t H5Funmount(hid_t loc_id, const char *name )
Purpose:
Unmounts a file.
Description:
Given a mount point, H5Funmount dissassociates the mount point's file from the file mounted there. This function does not close either file.

The mount point can either be the group in the parent or the root group of the mounted file (both groups have the same name). If the mount point was opened before the mount then it is the group in the parent; if it was opened after the mount then it is the root group of the child.

Parameters:
hid_t loc_id
The identifier for the location at which the specified file is to be unmounted.
const char *name
The name of the file to be unmounted.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.

Name: H5Freopen
Signature:
hid__t H5Freopen(hid_t file_id )
Purpose:
Reopens an HDF5 file.
Description:
H5Freopen reopens an HDF5 file. The new file identifier which is returned points to the same file as the specified file idetifier, file_id. Both identifiers share caches and other information. The only difference between the identifiers is that the new identifier is not mounted anywhere and no files are mounted on it.
Parameters:
hid_t file_id
Identifier of a file to terminate access to.
Returns:
Returns a new file identifier if successful; otherwise returns a negative value.

Introduction to HDF5 
HDF5 User Guide 
Other HDF5 documents and links 
And in this document, the HDF5 Reference Manual  
H5   H5A   H5D   H5E   H5F   H5G   H5I  
H5P   H5R   H5RA   H5S   H5T   H5Z   Tools  

HDF Help Desk
Last modified: 30 October 1998