HDF5 documents and links 
Introduction to HDF5 
HDF5 User Guide 
And in this document, the HDF5 Reference Manual  
H5   H5A   H5D   H5E   H5F   H5G   H5I   H5P  
H5R   H5S   H5T   H5Z   Tools   Datatypes  

H5F: File Interface

File API Functions

These functions are designed to provide file-level access to HDF5 files. Further manipulation of objects inside a file is performed through one of APIs documented below.

The C Interfaces:
             

Alphabetical Listing
             

The FORTRAN90 Interfaces:
In general, each FORTRAN90 subroutine performs exactly the same task as the corresponding C function.
             


Name: H5Fclose
Signature:
herr_t H5Fclose(hid_t file_id )
Purpose:
Terminates access to an HDF5 file.
Description:
H5Fclose terminates access to an HDF5 file by flushing all data to storage and terminating access to the file through file_id.

If this is the last file identifier open for the file and no other access identifier is open (e.g., a dataset identifier, group identifier, or shared datatype identifier), the file will be fully closed and access will end.

Delayed close:
Note the following deviation from the above-described behavior. If H5Fclose is called for a file but one or more objects within the file remain open, those objects will remain accessible until they are individually closed. Thus, if the dataset data_sample is open when H5Fclose is called for the file containing it, data_sample will remain open and accessible (including writable) until it is explicitely closed. The file will be automatically closed once all objects in the file have been closed.

Be warned, hoever, that there are circumstances where it is not possible to delay closing a file. For example, an MPI-IO file close is a collective call; all of the processes that opened the file must close it collectively. The file cannot be closed at some time in the future by each process in an independent fashion. Another example is that an application using an AFS token-based file access privilage may destroy its AFS token after H5Fclose has returned successfully. This would make any future access to the file, or any object within it, illegal.

In such situations, applications must close all open objects in a file before calling H5Fclose. It is generally recommended to do so in all cases.

Parameters:
hid_t file_id
IN: Identifier of a file to terminate access to.
Returns:
Returns a non-negative value if successful; otherwise returns a negative value.
Fortran90 Interface: h5fclose_f
SUBROUTINE h5fclose_f(file_id, hdferr) 
  IMPLICIT NONE
  INTEGER(HID_T), INTENT(IN) :: file_id ! File identifier
  INTEGER, INTENT(OUT) :: hdferr        ! Error code
                                        ! 0 on success and -1 on failure
END SUBROUTINE h5fclose_f 
	

Name: H5Fcreate
Signature:
hid_t H5Fcreate(const char *name, unsigned flags, hid_t create_id, hid_t access_id )
Purpose:
Creates HDF5 files.
Description:
H5Fcreate is the primary function for creating HDF5 files .

The flags parameter determines whether an existing file will be overwritten. All newly created files are opened for both reading and writing. All flags may be combined with the bit-wise OR operator (`|') to change the behavior of the H5Fcreate call.

The more complex behaviors of file creation and access are controlled through the file-creation and file-access property lists. The value of H5P_DEFAULT for a property list value indicates that the library should use the default values for the appropriate property list.

The return value is a file identifier for the newly-created file; this file identifier should be closed by calling H5Fclose when it is no longer needed.

Special case -- File creation in the case of an already-open file:
If a file being created is already opened, by either a previous H5Fopen or H5Fcreate call, the HDF5 library may or may not detect that the open file and the new file are the same physical file. (See H5Fopen regarding the limitations in detecting the re-opening of an already-open file.)

If the library detects that the file is already opened, H5Fcreate will return a failure, regardless of the use of H5F_ACC_TRUNC.

If the library does not detect that the file is already opened and H5F_ACC_TRUNC is not used, H5Fcreate will return a failure because the file already exists. Note that this is correct behavior.

But if the library does not detect that the file is already opened and H5F_ACC_TRUNC is used, H5Fcreate will truncate the existing file and return a valid file identifier. Such a truncation of a currently-opened file will almost certainly result in errors. While unlikely, the HDF5 library may not be able to detect, and thus report, such errors.

Applications should avoid calling H5Fcreate with an already opened file.

Parameters:
const char *name
IN: Name of the file to access.
uintn flags
IN: File access flags. Allowable values are:
    H5F_ACC_TRUNC
    Truncate file, if it already exists, erasing all data previously stored in the file.
    H5F_ACC_EXCL
    Fail if file already exists.
  • H5F_ACC_TRUNC and H5F_ACC_EXCL are mutually exclusive; use exactly one.
  • An additional flag, H5F_ACC_DEBUG, prints debug information. This flag is used only by HDF5 library developers; it is neither tested nor supported for use in applications.
    hid_t create_id
    IN: File creation property list identifier, used when modifying default file meta-data. Use H5P_DEFAULT for default file creation properties.
    hid_t access_id
    IN: File access property list identifier. If parallel file access is desired, this is a collective call according to the communicator stored in the access_id. Use H5P_DEFAULT for default file access properties.
  • Returns:
    Returns a file identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fcreate_f
    SUBROUTINE h5fcreate_f(name, access_flags, file_id, hdferr, &  
                           creation_prp, access_prp)
      IMPLICIT NONE 
      CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
      INTEGER, INTENT(IN) :: access_flag     ! File access flags 
                                             ! Possible values are:
                                             !     H5F_ACC_RDWR_F   
                                             !     H5F_ACC_RDONLY_F   
                                             !     H5F_ACC_TRUNC_F  
                                             !     H5F_ACC_EXCL_F    
                                             !     H5F_ACC_DEBUG_F   
      INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier 
      INTEGER, INTENT(OUT) :: hdferr         ! Error code 
                                             ! 0 on success and -1 on failure
      INTEGER(HID_T), OPTIONAL, INTENT(IN) :: creation_prp 
                                             ! File creation propertly 
                                             ! list identifier, if not 
                                             ! specified its value is
                                             ! H5P_DEFAULT_F  
      INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp  
                                             ! File access property list 
                                             ! identifier, if not 
                                             ! specified its value is
                                             ! H5P_DEFAULT_F  
    END SUBROUTINE h5fcreate_f
    	

    Name: H5Fflush
    Signature:
    herr_t H5Fflush(hid_t object_id, H5F_scope_t scope )
    Purpose:
    Flushes all buffers associated with a file to disk.
    Description:
    H5Fflush causes all buffers associated with a file to be immediately flushed to disk without removing the data from the cache.

    object_id can be any object associated with the file, including the file itself, a dataset, a group, an attribute, or a named data type.

    scope specifies whether the scope of the flushing action is global or local. Valid values are

    H5F_SCOPE_GLOBAL      Flushes the entire virtual file.
    H5F_SCOPE_LOCAL Flushes only the specified file.
    Note:
    HDF5 does not possess full control over buffering. H5Fflush flushes the internal HDF5 buffers then asks the operating system (the OS) to flush the system buffers for the open files. After that, the OS is responsible for ensuring that the data is actually flushed to disk.
    Parameters:
    hid_t object_id
    IN: Identifier of object used to identify the file.
    H5F_scope_t scope
    IN: Specifies the scope of the flushing action.
    Returns:
    Returns a non-negative value if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fflush_f
    SUBROUTINE h5fflush_f(obj_id, new_file_id, hdferr)
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: obj_id      ! Object identifier
      INTEGER, INTENT(IN)         :: scope       ! Flag with two possible values:
                                                 !     H5F_SCOPE_GLOBAL_F  
                                                 !     H5F_SCOPE_LOCAL_F  
      INTEGER, INTENT(OUT)        :: hdferr      ! Error code 
                                                 ! 0 on success and -1 on failure
    END SUBROUTINE h5fflush_f
    	

    Name: H5Fget_access_plist
    Signature:
    hid_t H5Fget_access_plist(hid_t file_id)
    Purpose:
    Returns a file access property list identifier.
    Description:
    H5Fget_access_plist returns the file access property list identifier of the specified file.

    See "File Access Properties" in H5P: Property List Interface in this reference manual and "File Access Property Lists" in Files in the HDF5 User's Guide for additional information and related functions.

    Parameters:
    hid_t file_id
    IN: Identifier of file to get access property list of
    Returns:
    Returns a file access property list identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fget_access_plist_f
    SUBROUTINE h5fget_access_plist_f(file_id, fcpl_id, hdferr)
    
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)   :: file_id ! File identifier
      INTEGER(HID_T), INTENT(OUT)  :: fapl_id ! File access property list identifier
      INTEGER, INTENT(OUT)         :: hdferr  ! Error code 
                                              ! 0 on success and -1 on failure
    END SUBROUTINE h5fget_access_plist_f
    	

    Name: H5Fget_create_plist
    Signature:
    hid_t H5Fget_create_plist(hid_t file_id )
    Purpose:
    Returns a file creation property list identifier.
    Description:
    H5Fget_create_plist returns a file creation property list identifier identifying the creation properties used to create this file. This function is useful for duplicating properties when creating another file.

    See "File Creation Properties" in H5P: Property List Interface in this reference manual and "File Creation Properties" in Files in the HDF5 User's Guide for additional information and related functions.

    Parameters:
    hid_t file_id
    IN: Identifier of the file to get creation property list of
    Returns:
    Returns a file creation property list identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fget_create_plist_f
    SUBROUTINE h5fget_create_plist_f(file_id, fcpl_id, hdferr)
    
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)   :: file_id ! File identifier
      INTEGER(HID_T), INTENT(OUT)  :: fcpl_id ! File creation property list 
                                              ! identifier
      INTEGER, INTENT(OUT)         :: hdferr  ! Error code 
                                              ! 0 on success and -1 on failure
    END SUBROUTINE h5fget_create_plist_f
    	

    Name: H5Fget_freespace
    Signature:
    hssize_t H5Fget_freespace(hid_t file_id)
    Purpose:
    Returns the amount of free space in a file.
    Description:
    Given the identifier of an open file, file_id, H5Fget_freespace returns the amount of space that is unused by any objects in the file.

    Currently, the HDF5 library only tracks free space in a file from a file open or create until that file is closed, so this routine will only report the free space that has been created during that interval.

    Parameters:
    hid_t file_id
    IN: Identifier of a currently-open HDF5 file
    Returns:
    Returns a the amount of free space in the file if successful; otherwise returns a negative value.
    Returns:
    Returns a file creation property list identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fget_freespace_f
    SUBROUTINE h5fget_freespace_f(file_id, free_space, hdferr)
    
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: file_id       ! File identifier
      INTEGER(HSSIZE_T), INTENT(OUT) :: free_space ! Amount of free space in file
      INTEGER, INTENT(OUT)        :: hdferr        ! Error code 
                                                   ! 0 on success and -1 on failure
    END SUBROUTINE h5fget_freespace_f 
    	

    Name: H5Fget_obj_count
    Signature:
    int H5Fget_obj_count(hid_t file_id, unsigned int types )
    Purpose:
    Returns the number of open object identifiers for an open file.
    Description:
    Given the identifier of an open file, file_id, and the desired object types, types, H5Fget_obj_count returns the number of open object identifiers for the file.

    To retrieve a count of open identifiers for open objects in all HDF5 application files that are currently open, pass the value H5F_OBJ_ALL in file_id.

    The types of objects to be counted are specified in types as follows:

    H5F_OBJ_FILE Files only
    H5F_OBJ_DATASET Datasets only
    H5F_OBJ_GROUP Groups only
    H5F_OBJ_DATATYPE   Named datatypes only
    H5F_OBJ_ATTR   Attributes only
    H5F_OBJ_ALL All of the above
    (I.e., H5F_OBJ_FILE | H5F_OBJ_DATASET | H5F_OBJ_GROUP | H5F_OBJ_DATATYPE | H5F_OBJ_ATTR )
    Multiple object types can be combined with the logical OR operator (|). For example, the expression (H5F_OBJ_DATASET|H5F_OBJ_GROUP) would call for datasets and groups.
    Parameters:
    hid_t file_id
    IN: Identifier of a currently-open HDF5 file or H5F_OBJ_ALL for all currently-open HDF5 files.
    unsigned int types
    IN: Type of object for which identifiers are to be returned.
    Returns:
    Returns a the number of open objects if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fget_obj_count_f
    SUBROUTINE h5fget_obj_count_f(file_id, obj_type, obj_count, hdferr)
    
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: file_id   ! File identifier
      INTEGER, INTENT(IN)         :: obj_type  ! Object types, possible values are:
                                               !     H5F_OBJ_FILE_F
                                               !     H5F_OBJ_GROUP_F
                                               !     H5F_OBJ_DATASET_F
                                               !     H5F_OBJ_DATATYPE_F
                                               !     H5F_OBJ_ALL_F
      INTEGER, INTENT(OUT)        :: obj_count ! Number of opened objects
      INTEGER, INTENT(OUT)        :: hdferr    ! Error code 
                                               ! 0 on success and -1 on failure
    END SUBROUTINE h5fget_obj_count_f
    	

    Name: H5Fget_obj_ids
    Signature:
    int H5Fget_obj_ids(hid_t file_id, unsigned int types, int max_objs, hid_t *obj_id_list )
    Purpose:
    Returns a list of open object identifiers.
    Description:
    Given the file identifier file_id and the type of objects to be identified, types, H5Fget_obj_ids returns the list of identifiers for all open HDF5 objects fitting the specified criteria.

    To retrieve identifiers for open objects in all HDF5 application files that are currently open, pass the value H5F_OBJ_ALL in file_id.

    The types of object identifiers to be retrieved are specified in types using the codes listed for the same parameter in H5Fget_obj_count

    To retrieve identifiers for all open objects, pass a negative value for the max_objs.

    Parameters:
    hid_t file_id
    IN: Identifier of a currently-open HDF5 file or H5F_OBJ_ALL for all currently-open HDF5 files.
    unsigned int types
    IN: Type of object for which identifiers are to be returned.
    int max_objs
    IN: Maximum number of object identifiers to place into obj_id_list.
    hid_t *obj_id_list
    OUT: Pointer to the returned list of open object identifiers.
    Returns:
    Returns number of objects placed into obj_id_list if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fget_obj_ids_f
    SUBROUTINE h5fget_obj_ids_f(file_id, obj_type, max_objs, obj_ids, hdferr)
    
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)   :: file_id  ! File identifier
      INTEGER,        INTENT(IN)   :: obj_type ! Object types, possible values are:
                                               !     H5F_OBJ_FILE_F
                                               !     H5F_OBJ_GROUP_F
                                               !     H5F_OBJ_DATASET_F
                                               !     H5F_OBJ_DATATYPE_F
                                               !     H5F_OBJ_ALL_F
      INTEGER, INTENT(IN)          :: max_objs ! Maximum number of object 
                                               ! identifiers to retrieve
      INTEGER(HID_T), DIMENSION(*), INTENT(OUT) :: obj_ids
                                               ! Array of requested object 
                                               ! identifiers
      INTEGER, INTENT(OUT)        :: hdferr    ! Error code 
                                               ! 0 on success and -1 on failure
    END SUBROUTINE h5fget_obj_ids_f
    	

    Name: H5Fget_vfd_handle
    Signature:
    herr_t H5Fget_vfd_handle(hid_t file_id, hid_t fapl_id, void *file_handle )
    Purpose:
    Returns pointer to the file handle from the virtual file driver.
    Description:
    Given the file identifier file_id and the file access property list fapl_id, H5Fget_vfd_handle returns a pointer to the file handle from the low-level file driver currently being used by the HDF5 library for file I/O.
    Notes:
    Users are not supposed to modify any file through this file handle.

    This file handle is dynamic and is valid only while the file remains open; it will be invalid if the file is closed and reopened or opened during a subsequent session.

    Parameters:
    hid_t file_id
    IN: Identifier of the file to be queried.
    hid_t fapl_id
    IN: File access property list identifier. For most drivers, the value will be H5P_DEFAULT. For the FAMILY or MULTI drivers, this value should be defined through the property list functions: H5Pset_family_offset for the FAMILY driver and H5Pset_multi_type for the MULTI driver.
    void *file_handle
    OUT: Pointer to the file handle being used by the low-level virtual file driver.
    Returns:
    Returns a non-negative value if successful; otherwise returns a negative value.
    Fortran90 Interface:
    None.

    Name: H5Fis_hdf5
    Signature:
    htri_t H5Fis_hdf5(const char *name )
    Purpose:
    Determines whether a file is in the HDF5 format.
    Description:
    H5Fis_hdf5 determines whether a file is in the HDF5 format.
    Parameters:
    const char *name
    IN: File name to check format.
    Returns:
    When successful, returns a positive value, for TRUE, or 0 (zero), for FALSE. Otherwise returns a negative value.
    Fortran90 Interface: h5fis_hdf5_f
    SUBROUTINE h5fis_hdf5_f(name, status, hdferr)   
      IMPLICIT NONE 
      CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
      LOGICAL, INTENT(OUT) :: status         ! This parameter indicates 
                                             ! whether file is an HDF5 file 
                                             ! ( TRUE or FALSE ) 
      INTEGER, INTENT(OUT) :: hdferr         ! Error code 
                                             ! 0 on success and -1 on failure
    END SUBROUTINE h5fis_hdf5_f
    	

    Name: H5Fmount
    Signature:
    herr_t H5Fmount(hid_t loc_id, const char *name, hid_t child_id, hid_t plist_id )
    Purpose:
    Mounts a file.
    Description:
    H5Fmount mounts the file specified by child_id onto the group specified by loc_id and name using the mount properties plist_id.

    Note that loc_id is either a file or group identifier and name is relative to loc_id.

    Parameters:
    hid_t loc_id
    IN: Identifier for of file or group in which name is defined.
    const char *name
    IN: Name of the group onto which the file specified by child_id is to be mounted.
    hid_t child_id
    IN: Identifier of the file to be mounted.
    hid_t plist_id
    IN: Identifier of the property list to be used.
    Returns:
    Returns a non-negative value if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fmount_f
    SUBROUTINE h5fmount_f(loc_id, name, child_id, hdferr)
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: loc_id      ! File or group identifier
      CHARACTER(LEN=*), INTENT(IN):: name        ! Group name at locationloc_id
      INTEGER(HID_T), INTENT(IN)  :: child_id    ! File(to be mounted) identifier
      INTEGER, INTENT(OUT)        :: hdferr      ! Error code 
                                                 ! 0 on success and -1 on failure
    END SUBROUTINE h5fmount_f
    	

    Name: H5Fopen
    Signature:
    hid_t H5Fopen(const char *name, unsigned flags, hid_t access_id )
    Purpose:
    Opens an existing file.
    Description:
    H5Fopen opens an existing file and is the primary function for accessing existing HDF5 files.

    The parameter access_id is a file access property list identifier or H5P_DEFAULT if the default I/O access parameters are to be used

    The flags argument determines whether writing to an existing file will be allowed. The file is opened with read and write permission if flags is set to H5F_ACC_RDWR. All flags may be combined with the bit-wise OR operator (`|') to change the behavior of the file open call. More complex behaviors of file access are controlled through the file-access property list.

    The return value is a file identifier for the open file; this file identifier should be closed by calling H5Fclose when it is no longer needed.

    Special case -- Multiple opens:
    A file can often be opened with a new H5Fopen call without closing an already-open identifier established in a previous H5Fopen or H5Fcreate call. Each such H5Fopen call will return a unique identifier and the file can be accessed through any of these identifiers as long as the identifier remains valid. In such multiply-opened cases, all the open calls should use the same flags argument.

    In some cases, such as files on a local Unix file system, the HDF5 library can detect that a file is multiply opened and will maintain coherent access among the file identifiers.

    But in many other cases, such as parallel file systems or networked file systems, it is not always possible to detect multiple opens of the same physical file. In such cases, HDF5 will treat the file identifiers as though they are accessing different files and will be unable to maintain coherent access. Errors are likely to result in these cases. While unlikely, the HDF5 library may not be able to detect, and thus report, such errors.

    It is generally recommended that applications avoid multiple opens of the same file.

    Parameters:
    const char *name
    IN: Name of the file to access.
    unsigned flags
    IN: File access flags. Allowable values are:
      H5F_ACC_RDWR
      Allow read and write access to file.
      H5F_ACC_RDONLY
      Allow read-only access to file.
    • H5F_ACC_RDWR and H5F_ACC_RDONLY are mutually exclusive; use exactly one.
    • An additional flag, H5F_ACC_DEBUG, prints debug information. This flag is used only by HDF5 library developers; it is neither tested nor supported for use in applications.
    hid_t access_id
    IN: Identifier for the file access properties list. If parallel file access is desired, this is a collective call according to the communicator stored in the access_id. Use H5P_DEFAULT for default file access properties.
    Returns:
    Returns a file identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5fopen_f
    SUBROUTINE h5fopen_f(name, access_flags, file_id, hdferr, &  
                         access_prp)
      IMPLICIT NONE 
      CHARACTER(LEN=*), INTENT(IN) :: name   ! Name of the file
      INTEGER, INTENT(IN) :: access_flag     ! File access flags  
                                             ! Possible values are:
                                             !     H5F_ACC_RDWR_F   
                                             !     H5F_ACC_RDONLY_F    
      INTEGER(HID_T), INTENT(OUT) :: file_id ! File identifier 
      INTEGER, INTENT(OUT) :: hdferr         ! Error code 
                                             ! 0 on success and -1 on failure
      INTEGER(HID_T), OPTIONAL, INTENT(IN) :: access_prp  
                                             ! File access property list 
                                             ! identifier  
    END SUBROUTINE h5fopen_f
    	

    Name: H5Freopen
    Signature:
    hid_t H5Freopen(hid_t file_id )
    Purpose:
    Returns a new identifier for a previously-opened HDF5 file.
    Description:
    H5Freopen returns a new file identifier for an already-open HDF5 file, as specified by file_id. Both identifiers share caches and other information. The only difference between the identifiers is that the new identifier is not mounted anywhere and no files are mounted on it.

    Note that there is no circumstance under which H5Freopen can actually open a closed file; the file must already be open and have an active file_id. E.g., one cannot close a file with H5Fclose (file_id) then use H5Freopen (file_id) to reopen it.

    The new file identifier should be closed by calling H5Fclose when it is no longer needed.

    Parameters:
    hid_t file_id
    IN: Identifier of a file for which an additional identifier is required.
    Returns:
    Returns a new file identifier if successful; otherwise returns a negative value.
    Fortran90 Interface: h5freopen_f
    SUBROUTINE h5freopen_f(file_id, new_file_id, hdferr)
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: file_id     ! File identifier 
      INTEGER(HID_T), INTENT(OUT) :: new_file_id ! New file identifier 
      INTEGER, INTENT(OUT)        :: hdferr      ! Error code 
                                                 ! 0 on success and -1 on failure
    END SUBROUTINE h5freopen_f 
    	

    Name: H5Funmount
    Signature:
    herr_t H5Funmount(hid_t loc_id, const char *name )
    Purpose:
    Unmounts a file.
    Description:
    Given a mount point, H5Funmount dissassociates the mount point's file from the file mounted there. This function does not close either file.

    The mount point can be either the group in the parent or the root group of the mounted file (both groups have the same name). If the mount point was opened before the mount then it is the group in the parent; if it was opened after the mount then it is the root group of the child.

    Note that loc_id is either a file or group identifier and name is relative to loc_id.

    Parameters:
    hid_t loc_id
    IN: File or group identifier for the location at which the specified file is to be unmounted.
    const char *name
    IN: Name of the mount point.
    Returns:
    Returns a non-negative value if successful; otherwise returns a negative value.
    Fortran90 Interface: h5funmount_f
    SUBROUTINE h5funmount_f(loc_id, name, child_id, hdferr)
      IMPLICIT NONE 
      INTEGER(HID_T), INTENT(IN)  :: loc_id      ! File or group identifier
      CHARACTER(LEN=*), INTENT(IN):: name        ! Group name at location loc_id
      INTEGER, INTENT(OUT)        :: hdferr      ! Error code 
                                                 ! 0 on success and -1 on failure
    END SUBROUTINE h5funmount_f
    	

    HDF5 documents and links 
    Introduction to HDF5 
    HDF5 User Guide 
    And in this document, the HDF5 Reference Manual  
    H5   H5A   H5D   H5E   H5F   H5G   H5I   H5P  
    H5R   H5S   H5T   H5Z   Tools   Datatypes  

    HDF Help Desk
    Describes HDF5 Release 1.6.2, February 2004