# Makefile.in generated by automake 1.6.3 from Makefile.am. # @configure_input@ # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # HDF5 Library Doc Makefile(.in) # # Copyright (C) 1997, 2002 # National Center for Supercomputing Applications. # All rights reserved. # # SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ EXEEXT = @EXEEXT@ OBJEXT = @OBJEXT@ PATH_SEPARATOR = @PATH_SEPARATOR@ # Install directories that automake doesn't know about includedir = $(exec_prefix)/include # Set the paths for autotools to be correct on heping. # Ideally, these tools should never be needed during the build. ACLOCAL = /usr/bin/aclocal AUTOCONF = /usr/local/autoconf-2.59/bin/autoconf AUTOMAKE = /usr/bin/automake AUTOHEADER = /usr/local/autoconf-2.59/bin/autoheader ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ AWK = @AWK@ BUILD_PDB2HDF = @BUILD_PDB2HDF@ BYTESEX = @BYTESEX@ CC = @CC@ CC_VERSION = @CC_VERSION@ CONFIG_DATE = @CONFIG_DATE@ CONFIG_MODE = @CONFIG_MODE@ CONFIG_USER = @CONFIG_USER@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ DEBUG_PKG = @DEBUG_PKG@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DYNAMIC_DIRS = @DYNAMIC_DIRS@ ECHO = @ECHO@ EGREP = @EGREP@ F77 = @F77@ F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ FC = @FC@ FFLAGS = @FFLAGS@ FILTERS = @FILTERS@ FSEARCH_DIRS = @FSEARCH_DIRS@ GASS = @GASS@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ H5_VERSION = @H5_VERSION@ HADDR_T = @HADDR_T@ HDF5_INTERFACES = @HDF5_INTERFACES@ HID_T = @HID_T@ HL = @HL@ HL_FOR = @HL_FOR@ HSIZET = @HSIZET@ HSIZE_T = @HSIZE_T@ HSSIZE_T = @HSSIZE_T@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LT_STATIC_EXEC = @LT_STATIC_EXEC@ MAINT = @MAINT@ MPE = @MPE@ OBJDUMP = @OBJDUMP@ OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ PACKAGE = @PACKAGE@ PARALLEL = @PARALLEL@ PERL = @PERL@ PTHREAD = @PTHREAD@ RANLIB = @RANLIB@ RC = @RC@ ROOT = @ROOT@ RUNPARALLEL = @RUNPARALLEL@ RUNSERIAL = @RUNSERIAL@ R_INTEGER = @R_INTEGER@ R_LARGE = @R_LARGE@ SEARCH = @SEARCH@ SETX = @SETX@ SIZE_T = @SIZE_T@ SRB = @SRB@ SSL = @SSL@ STATIC_SHARED = @STATIC_SHARED@ STRIP = @STRIP@ TESTGASS = @TESTGASS@ TESTPARALLEL = @TESTPARALLEL@ TESTSRB = @TESTSRB@ TRACE_API = @TRACE_API@ USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ USE_FILTER_NBIT = @USE_FILTER_NBIT@ USE_FILTER_SCALEOFFSET = @USE_FILTER_SCALEOFFSET@ USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ USE_FILTER_SZIP = @USE_FILTER_SZIP@ VERSION = @VERSION@ am__include = @am__include@ am__quote = @am__quote@ install_sh = @install_sh@ # Shell commands used in Makefiles RM = rm -f CP = cp # Libraries to link to while building LIBHDF5 = $(top_builddir)/src/libhdf5.la LIBH5TEST = $(top_builddir)/test/libh5test.la LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la docdir = $(exec_prefix)/doc # Scripts used to build examples H5CC = $(bindir)/h5cc H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc # Make sure that these variables are exported to the Makefiles F9XMODEXT = @F9XMODEXT@ F9XMODFLAG = @F9XMODFLAG@ SUBDIRS = Graphics examples localdocdir = $(docdir)/hdf5/Tutor # Public doc files (to be installed)... localdoc_DATA = Contents.html ContentsAdd.html ContentsAdv.html \ ContentsFull.html ContentsIntro.html Copyright.html answers.html \ api.html bighdf2sp.JPG compound.html crtatt.html crtdat.html \ crtfile.html crtgrp.html crtgrpar.html crtgrpd.html extend.html \ fileorg.html glossary.html img001.gif img002.gif img003.gif \ img004.gif img005.gif index.html intro.html iterate.html \ mount.html questions.html rdwt.html references.html reftoobj.html \ reftoreg.html select.html selectc.html title.html util.html subdir = doc/html/Tutor mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h CONFIG_CLEAN_FILES = DIST_SOURCES = DATA = $(localdoc_DATA) RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ uninstall-info-recursive all-recursive install-data-recursive \ install-exec-recursive installdirs-recursive install-recursive \ uninstall-recursive check-recursive installcheck-recursive DIST_COMMON = Makefile.am Makefile.in DIST_SUBDIRS = $(SUBDIRS) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/config/commence-doc.am $(top_srcdir)/config/commence.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/html/Tutor/Makefile Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: localdocDATA_INSTALL = $(INSTALL_DATA) install-localdocDATA: $(localdoc_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(localdocdir) @list='$(localdoc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f"; \ $(localdocDATA_INSTALL) $$d$$p $(DESTDIR)$(localdocdir)/$$f; \ done uninstall-localdocDATA: @$(NORMAL_UNINSTALL) @list='$(localdoc_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(localdocdir)/$$f"; \ rm -f $(DESTDIR)$(localdocdir)/$$f; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ETAGS = etags ETAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = ../../.. distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) @list='$(DISTFILES)'; for file in $$list; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(localdocdir) install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-localdocDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool uninstall-am: uninstall-info-am uninstall-localdocDATA uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ clean-generic clean-libtool clean-recursive distclean \ distclean-generic distclean-libtool distclean-recursive \ distclean-tags distdir dvi dvi-am dvi-recursive info info-am \ info-recursive install install-am install-data install-data-am \ install-data-recursive install-exec install-exec-am \ install-exec-recursive install-info install-info-am \ install-info-recursive install-localdocDATA install-man \ install-recursive install-strip installcheck installcheck-am \ installdirs installdirs-am installdirs-recursive \ maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ uninstall uninstall-am uninstall-info-am \ uninstall-info-recursive uninstall-localdocDATA \ uninstall-recursive # Ignore most rules lib progs check test _test: @echo "Nothing to be done" tests dep depend: @@SETX@; for d in X $(SUBDIRS); do \ if test $$d != X; then \ (cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ fi; done # In docs directory, install-doc is the same as install install-doc install-all: $(MAKE) $(AM_MAKEFLAGS) install uninstall-doc uninstall-all: $(MAKE) $(AM_MAKEFLAGS) uninstall # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: