#! /bin/sh # From configure.in Id: configure.in. # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.53 for HDF5 1.5.28. # # Report bugs to . # # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac echo=${ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && { $as_unset LANG || test "${LANG+set}" != set; } || { LANG=C; export LANG; } (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || { LC_ALL=C; export LC_ALL; } (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || { LC_TIME=C; export LC_TIME; } (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || { LC_CTYPE=C; export LC_CTYPE; } (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || { LANGUAGE=C; export LANGUAGE; } (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || { LC_COLLATE=C; export LC_COLLATE; } (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || { LC_NUMERIC=C; export LC_NUMERIC; } (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conftest.sh echo "exit 0" >>conftest.sh chmod +x conftest.sh if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conftest.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME='HDF5' PACKAGE_TARNAME='hdf5' PACKAGE_VERSION='1.5.28' PACKAGE_STRING='HDF5 1.5.28' PACKAGE_BUGREPORT='hdfhelp@ncsa.uiuc.edu' ac_unique_file="src/HDF5.f90" # Factoring default headers for most tests. ac_includes_default="\ #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif" # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias ac_env_CC_set=${CC+set} ac_env_CC_value=$CC ac_cv_env_CC_set=${CC+set} ac_cv_env_CC_value=$CC ac_env_CFLAGS_set=${CFLAGS+set} ac_env_CFLAGS_value=$CFLAGS ac_cv_env_CFLAGS_set=${CFLAGS+set} ac_cv_env_CFLAGS_value=$CFLAGS ac_env_LDFLAGS_set=${LDFLAGS+set} ac_env_LDFLAGS_value=$LDFLAGS ac_cv_env_LDFLAGS_set=${LDFLAGS+set} ac_cv_env_LDFLAGS_value=$LDFLAGS ac_env_CPPFLAGS_set=${CPPFLAGS+set} ac_env_CPPFLAGS_value=$CPPFLAGS ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} ac_cv_env_CPPFLAGS_value=$CPPFLAGS ac_env_CPP_set=${CPP+set} ac_env_CPP_value=$CPP ac_cv_env_CPP_set=${CPP+set} ac_cv_env_CPP_value=$CPP # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures HDF5 1.5.28 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of HDF5 1.5.28:";; esac cat <<\_ACEOF Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-shared=PKGS build shared libraries default=yes --enable-static=PKGS build static libraries default=yes --enable-fast-install=PKGS optimize for fast installation default=yes --disable-libtool-lock avoid locking (might break parallel builds) --enable-static-exec Build only statically linked executables default=no --enable-parallel=TYPE Search for MPI-IO and MPI support files Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld default=no --with-pic try to use only PIC/non-PIC objects default=use both --with-zlib=DIR Use the GNU zlib compression Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF HDF5 configure 1.5.28 generated by GNU Autoconf 2.53 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by HDF5 $as_me 1.5.28, which was generated by GNU Autoconf 2.53. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell meta-characters. ac_configure_args= ac_sep= for ac_arg do case $ac_arg in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n ) continue ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" ac_sep=" " ;; esac # Get rid of the leading space. done # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core core.* *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers src/H5config_fortran.h" ac_aux_dir= for ac_dir in ../bin $srcdir/../bin; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&5 echo "$as_me: error: cannot find install-sh or install.sh in ../bin $srcdir/../bin" >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ac_config_commands="$ac_config_commands default-1" # Make sure we can run config.sub. $ac_config_sub sun4 >/dev/null 2>&1 || { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 echo "$as_me: error: cannot run $ac_config_sub" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking build system type" >&5 echo $ECHO_N "checking build system type... $ECHO_C" >&6 if test "${ac_cv_build+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_build_alias=$build_alias test -z "$ac_cv_build_alias" && ac_cv_build_alias=`$ac_config_guess` test -z "$ac_cv_build_alias" && { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_build" >&5 echo "${ECHO_T}$ac_cv_build" >&6 build=$ac_cv_build build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$as_me:$LINENO: checking host system type" >&5 echo $ECHO_N "checking host system type... $ECHO_C" >&6 if test "${ac_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_host_alias=$host_alias test -z "$ac_cv_host_alias" && ac_cv_host_alias=$ac_cv_build_alias ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: $ac_cv_host" >&5 echo "${ECHO_T}$ac_cv_host" >&6 host=$ac_cv_host host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$as_me:$LINENO: checking shell variables initial values" >&5 echo $ECHO_N "checking shell variables initial values... $ECHO_C" >&6 set >&5 echo "$as_me:$LINENO: result: done" >&5 echo "${ECHO_T}done" >&6 if test -x "/bin/pwd"; then pwd=/bin/pwd else pwd=pwd fi ROOT=`$pwd` echo "$as_me:$LINENO: checking for cached host" >&5 echo $ECHO_N "checking for cached host... $ECHO_C" >&6 if test "${hdf5_cv_host+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else hdf5_cv_host="none" fi echo "$as_me:$LINENO: result: $hdf5_cv_host" >&5 echo "${ECHO_T}$hdf5_cv_host" >&6; if test "X$hdf5_cv_host" = "Xnone"; then hdf5_cv_host=$host elif test "$hdf5_cv_host" != "$host"; then echo "The config.cache file was generated on $hdf5_cv_host but" echo "this is $host. Please remove that file and try again." { { echo "$as_me:$LINENO: error: config.cache file is invalid" >&5 echo "$as_me: error: config.cache file is invalid" >&2;} { (exit 1); exit 1; }; } fi case "$host_os" in aix4.*) host_os_novers=aix4.x ;; freebsd*) host_os_novers=freebsd ;; irix5.*) host_os_novers=irix5.x ;; irix6.*) host_os_novers=irix6.x ;; osf4.*) host_os_novers=osf4.x ;; osf5.*) host_os_novers=osf5.x ;; solaris2.*) host_os_novers=solaris2.x ;; *) host_os_novers=$host_os ;; esac host_config="none" for f in $host_cpu-$host_vendor-$host_os \ $host_cpu-$host_vendor-$host_os_novers \ $host_vendor-$host_os \ $host_vendor-$host_os_novers \ $host_cpu-$host_os \ $host_cpu-$host_os_novers \ $host_cpu-$host_vendor \ $host_os \ $host_os_novers \ $host_vendor \ $host_cpu ; do echo "$as_me:$LINENO: checking for config $f" >&5 echo $ECHO_N "checking for config $f... $ECHO_C" >&6 if test -f $srcdir/config/$f; then host_config=$srcdir/config/$f echo "$as_me:$LINENO: result: found" >&5 echo "${ECHO_T}found" >&6 break fi echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 done if test "X$host_config" != "Xnone"; then CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" . $host_config fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi CC=$ac_ct_CC else CC="$ac_cv_prog_CC" fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$as_dir/$ac_word" ${1+"$@"} shift ac_cv_prog_CC="$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5 echo "${ECHO_T}$CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 echo "${ECHO_T}$ac_ct_CC" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$ac_ct_CC" && break done CC=$ac_ct_CC fi fi test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5 echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. echo "$as_me:$LINENO:" \ "checking for C compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 (eval $ac_compiler --version &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 (eval $ac_compiler -v &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 (eval $ac_compiler -V &5) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.exe" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. echo "$as_me:$LINENO: checking for C compiler default output" >&5 echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 (eval $ac_link_default) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Find the output, starting from the most likely. This scheme is # not robust to junk in `.', hence go to wildcards (a.*) only as a last # resort. # Be careful to initialize this variable, since it used to be cached. # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. ac_cv_exeext= for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null; ls a.out conftest 2>/dev/null; ls a.* conftest.* 2>/dev/null`; do case $ac_file in *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;; a.out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` # FIXME: I believe we export ac_cv_exeext for Libtool --akim. export ac_cv_exeext break;; * ) break;; esac done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5 echo "$as_me: error: C compiler cannot create executables" >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_file" >&5 echo "${ECHO_T}$ac_file" >&6 # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether the C compiler works" >&5 echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&5 echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'." >&2;} { (exit 1); exit 1; }; } fi fi fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 rm -f a.out a.exe conftest$ac_cv_exeext ac_clean_files=$ac_clean_files_save # Check the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $cross_compiling" >&5 echo "${ECHO_T}$cross_compiling" >&6 echo "$as_me:$LINENO: checking for suffix of executables" >&5 echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` export ac_cv_exeext break;; * ) break;; esac done else { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5 echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 echo "${ECHO_T}$ac_cv_exeext" >&6 rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT echo "$as_me:$LINENO: checking for suffix of object files" >&5 echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 if test "${ac_cv_objext+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 { { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5 echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 echo "${ECHO_T}$ac_cv_objext" >&6 OBJEXT=$ac_cv_objext ac_objext=$OBJEXT echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 if test "${ac_cv_c_compiler_gnu+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_compiler_gnu=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 GCC=`test $ac_compiler_gnu = yes && echo yes` ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS CFLAGS="-g" echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_cc_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_g=no fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi # Some people use a C++ compiler to compile C. Since we use `exit', # in C++ we need to declare it. In case someone uses the same compiler # for both compiling C and C++ we need to have the C++ compiler decide # the declaration of exit, since it's the most demanding environment. cat >conftest.$ac_ext <<_ACEOF #ifndef __cplusplus choke me #endif _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ ''\ '#include ' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ 'extern "C" void exit (int);' \ 'void exit (int);' do cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include $ac_declaration #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 continue fi rm -f conftest.$ac_objext conftest.$ac_ext cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_declaration #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { exit (42); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then break else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext done rm -f conftest* if test -n "$ac_declaration"; then echo '#ifdef __cplusplus' >>confdefs.h echo $ac_declaration >>confdefs.h echo '#endif' >>confdefs.h fi else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi echo "$as_me:$LINENO: result: $CPP" >&5 echo "${ECHO_T}$CPP" >&6 ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include Syntax error _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then : else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether non-existent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then # Broken: success on invalid input. continue else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5 echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC_BASENAME="`echo $CC |cut -f1 -d' ' |xargs basename 2>/dev/null`" echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="${MAKE}"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac else enable_shared=yes fi; # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac else enable_static=yes fi; # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac else enable_fast_install=yes fi; # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi; ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo "$as_me:$LINENO: checking for ld used by GCC" >&5 echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo "$as_me:$LINENO: checking for GNU ld" >&5 echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 else echo "$as_me:$LINENO: checking for non-GNU ld" >&5 echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 fi if test "${lt_cv_path_LD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$as_me:$LINENO: result: $LD" >&5 echo "${ECHO_T}$LD" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 if test "${lt_cv_prog_gnu_ld+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi fi echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 with_gnu_ld=$lt_cv_prog_gnu_ld echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 if test "${lt_cv_ld_reload_flag+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_ld_reload_flag='-r' fi echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 if test "${lt_cv_path_NM+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi NM="$lt_cv_path_NM" echo "$as_me:$LINENO: result: $NM" >&5 echo "${ECHO_T}$NM" >&6 echo "$as_me:$LINENO: checking whether ln -s works" >&5 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me:$LINENO: result: no, using $LN_S" >&5 echo "${ECHO_T}no, using $LN_S" >&6 fi echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 if test "${lt_cv_deplibs_check_method+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix4* | aix5*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* | pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' else lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; openbsd*) lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' else lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' fi ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv5uw[78]* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; esac ;; esac fi echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method # Check for command to grab the raw symbol name followed by C symbol from nm. echo "$as_me:$LINENO: checking command to parse $NM output" >&5 echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; irix*) symcode='[BCDEGRST]' ;; solaris* | sysv5*) symcode='[BDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then symcode='[ABCDGISTW]' fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[] = { EOF sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest; then pipe_works=yes fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" if test -z "$lt_cv_sys_global_symbol_pipe"; then global_symbol_to_cdecl= global_symbol_to_c_name_address= else global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" fi if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; then echo "$as_me:$LINENO: result: failed" >&5 echo "${ECHO_T}failed" >&6 else echo "$as_me:$LINENO: result: ok" >&5 echo "${ECHO_T}ok" >&6 fi echo "$as_me:$LINENO: checking for ANSI C header files" >&5 echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 if test "${ac_cv_header_stdc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #include #include #include _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_cv_header_stdc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f conftest.err conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } _ACEOF rm -f conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else echo "$as_me: program exited with status $ac_status" >&5 echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then eval "$as_ac_Header=yes" else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f conftest.$ac_objext conftest.$ac_ext fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo "$as_me:$LINENO: checking for file" >&5 echo $ECHO_N "checking for file... $ECHO_C" >&6 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 echo "${ECHO_T}$MAGIC_CMD" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi else MAGIC_CMD=: fi fi fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then echo "$as_me:$LINENO: result: $RANLIB" >&5 echo "${ECHO_T}$RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 echo "${ECHO_T}$ac_ct_RANLIB" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi RANLIB=$ac_ct_RANLIB else RANLIB="$ac_cv_prog_RANLIB" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi enable_dlopen=no enable_win32_dll=no # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" fi; test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '#line 3879 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 if test "${lt_cv_cc_needs_belf+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then lt_cv_cc_needs_belf=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 lt_cv_cc_needs_belf=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" need_locks="$enable_libtool_lock" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o if test x"$host" != x"$build"; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Transform linux* to *-*-linux-gnu*, to support old configure scripts. case $host_os in linux-gnu*) ;; linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # Allow CC to be a program name with arguments. set dummy $CC compiler="$2" echo "$as_me:$LINENO: checking for objdir" >&5 echo $ECHO_N "checking for objdir... $ECHO_C" >&6 rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. objdir=_libs fi rmdir .libs 2>/dev/null echo "$as_me:$LINENO: result: $objdir" >&5 echo "${ECHO_T}$objdir" >&6 # Check whether --with-pic or --without-pic was given. if test "${with_pic+set}" = set; then withval="$with_pic" pic_mode="$withval" else pic_mode=default fi; test -z "$pic_mode" && pic_mode=default # We assume here that the value for lt_cv_prog_cc_pic will not be cached # in isolation, and that seeing it set (from the cache) indicates that # the associated values are set (in the cache) correctly too. echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 if test "${lt_cv_prog_cc_pic+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_cc_pic= lt_cv_prog_cc_shlib= lt_cv_prog_cc_wl= lt_cv_prog_cc_static= lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_can_build_shared=$can_build_shared if test "$GCC" = yes; then lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-static' case $host_os in aix*) # Below there is a dirty hack to force normal static linking with -ldl # The problem is because libdl dynamically linked with both libc and # libC (AIX C++ library), which obviously doesn't included in libraries # list by gcc. This cause undefined symbols with -static flags. # This hack allows C programs to be linked with "-static -ldl", but # not sure about C++ programs. lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; sysv4*MP*) if test -d /usr/nec; then lt_cv_prog_cc_pic=-Kconform_pic fi ;; *) lt_cv_prog_cc_pic='-fPIC' ;; esac else # PORTME Check for PIC flags for the system compiler. case $host_os in aix3* | aix4* | aix5*) lt_cv_prog_cc_wl='-Wl,' # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else #################################################################### ## HACK Alert! This is causing problems with C++ on SP3...We'll just ## remove this...THERE! All better now. #################################################################### ##lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' : fi ;; hpux9* | hpux10* | hpux11*) # Is there a better lt_cv_prog_cc_static that works with the bundled CC? lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" lt_cv_prog_cc_pic='+Z' ;; irix5* | irix6*) lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' # PIC (with -KPIC) is the default. ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; newsos6) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' ;; osf3* | osf4* | osf5*) # All OSF/1 code is PIC. lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' ;; sco3.2v5*) lt_cv_prog_cc_pic='-Kpic' lt_cv_prog_cc_static='-dn' lt_cv_prog_cc_shlib='-belf' ;; solaris*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Wl,' ;; sunos4*) lt_cv_prog_cc_pic='-PIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' if test "x$host_vendor" = xsni; then lt_cv_prog_cc_wl='-LD' else lt_cv_prog_cc_wl='-Wl,' fi ;; uts4*) lt_cv_prog_cc_pic='-pic' lt_cv_prog_cc_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_cv_prog_cc_pic='-Kconform_pic' lt_cv_prog_cc_static='-Bstatic' fi ;; *) lt_cv_prog_cc_can_build_shared=no ;; esac fi fi if test -z "$lt_cv_prog_cc_pic"; then echo "$as_me:$LINENO: result: none" >&5 echo "${ECHO_T}none" >&6 else echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 # Check to make sure the pic_flag actually works. echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 if test "${lt_cv_prog_cc_pic_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then case $host_os in hpux9* | hpux10* | hpux11*) # On HP-UX, both CC and GCC only warn that PIC is supported... then # they create non-PIC objects. So, if there were any warnings, we # assume that PIC is not supported. if test -s conftest.err; then lt_cv_prog_cc_pic_works=no else lt_cv_prog_cc_pic_works=yes fi ;; *) lt_cv_prog_cc_pic_works=yes ;; esac else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 lt_cv_prog_cc_pic_works=no fi rm -f conftest.$ac_objext conftest.$ac_ext CFLAGS="$save_CFLAGS" fi if test "X$lt_cv_prog_cc_pic_works" = Xno; then lt_cv_prog_cc_pic= lt_cv_prog_cc_can_build_shared=no else lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" fi echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 fi # Check for any special shared library compilation flags. if test -n "$lt_cv_prog_cc_shlib"; then { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : else { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} lt_cv_prog_cc_can_build_shared=no fi fi echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 if test "${lt_cv_prog_cc_static_works+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_prog_cc_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then lt_cv_prog_cc_static_works=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi # Belt *and* braces to stop my trousers falling down: test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 pic_flag="$lt_cv_prog_cc_pic" special_shlib_compile_flags="$lt_cv_prog_cc_shlib" wl="$lt_cv_prog_cc_wl" link_static_flag="$lt_cv_prog_cc_static" no_builtin_flag="$lt_cv_prog_cc_no_builtin" can_build_shared="$lt_cv_prog_cc_can_build_shared" # Check to see if options -o and -c are simultaneously supported by compiler echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 if test "${lt_cv_compiler_c_o+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else $rm -r conftest 2>/dev/null mkdir conftest cd conftest echo "int some_variable = 0;" > conftest.$ac_ext mkdir out # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no if { (eval echo configure:4420: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then lt_cv_compiler_c_o=no else lt_cv_compiler_c_o=yes fi else # Append any errors to the config.log. cat out/conftest.err 1>&5 lt_cv_compiler_c_o=no fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm -r conftest 2>/dev/null fi compiler_c_o=$lt_cv_compiler_c_o echo "$as_me:$LINENO: result: $compiler_c_o" >&5 echo "${ECHO_T}$compiler_c_o" >&6 if test x"$compiler_c_o" = x"yes"; then # Check to see if we can write to a .lo echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 if test "${lt_cv_compiler_o_lo+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else lt_cv_compiler_o_lo=no save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -c -o conftest.lo" save_objext="$ac_objext" ac_objext=lo cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { int some_variable = 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then lt_cv_compiler_o_lo=no else lt_cv_compiler_o_lo=yes fi else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext ac_objext="$save_objext" CFLAGS="$save_CFLAGS" fi compiler_o_lo=$lt_cv_compiler_o_lo echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 echo "${ECHO_T}$compiler_o_lo" >&6 else compiler_o_lo=no fi # Check to see if we can do hard links to lock some files if needed hard_links="nottested" if test "$compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no echo "$as_me:$LINENO: result: $hard_links" >&5 echo "${ECHO_T}$hard_links" >&6 if test "$hard_links" = no; then { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi if test "$GCC" = yes; then # Check to see if options -fno-rtti -fno-exceptions are supported by compiler echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 echo "int some_variable = 0;" > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" compiler_rtti_exceptions=no cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { int some_variable = 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then compiler_rtti_exceptions=no else compiler_rtti_exceptions=yes fi else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest.$ac_objext conftest.$ac_ext CFLAGS="$save_CFLAGS" echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 echo "${ECHO_T}$compiler_rtti_exceptions" >&6 if test "$compiler_rtti_exceptions" = "yes"; then no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' else no_builtin_flag=' -fno-builtin' fi fi # See if the linker supports building shared libraries. echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 allow_undefined_flag= no_undefined_flag= need_lib_prefix=unknown need_version=unknown # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments archive_cmds= archive_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_into_libs=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported runpath_var= link_all_deplibs=unknown always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \$# in 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw* | pw32*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. hardcode_direct=yes archive_cmds='' hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall can do strange things, so it is better to # generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else ####################################################################### # This is a MAJOR HACK(tm) to get HDF5 to compile on Pacific Blue. # The ``-b nolibpath -b ...'' flags were messing with the mpicc # compiler's already defined library paths and it wasn't able to find # the libraries it needed to run....DOH! hname="`hostname`" case "$hname" in *pacific.llnl.gov* | *s0*) hardcode_libdir_flag_spec=' ' ;; *) hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' ;; esac # # End MAJOR HACK # ####################################################################### # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. allow_undefined_flag='${wl}-berok' # This is a bit strange, but is similar to how AIX traditionally builds # it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[012]) allow_undefined_flag='-undefined suppress' ;; *) # Darwin 1.3 on allow_undefined_flag='-flat_namespace -undefined suppress' ;; esac # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' # We need to add '_' to the symbols in $export_symbols first #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='-all_load $convenience' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' #Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes export_dynamic_flag_spec='${wl}-Bexport' ;; solaris*) # gcc --version < 3.0 without binutils cannot create self contained # shared libraries reliably, requiring libgcc.a to resolve some of # the object symbols generated in some cases. Libraries that use # assert need libgcc.a to resolve __eprintf, for example. Linking # a copy of libgcc.a into every shared library to guarantee resolving # such symbols causes other problems: According to Tim Van Holder # , C++ libraries end up with a separate # (to the application) exception stack for one thing. no_undefined_flag=' -z defs' if test "$GCC" = yes; then case `$CC --version 2>/dev/null` in [12].*) cat <&2 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably *** create self contained shared libraries on Solaris systems, without *** introducing a dependency on libgcc.a. Therefore, libtool is disabling *** -no-undefined support, which will at least allow you to build shared *** libraries. However, you may find that when you link such libraries *** into an application without using GCC, you have to manually add *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to *** upgrade to a newer version of GCC. Another option is to rebuild your *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. EOF no_undefined_flag= ;; esac fi # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) if test "x$host_vendor" = xsno; then archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? else archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5uw7* | unixware7*) no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi echo "$as_me:$LINENO: result: $ld_shlibs" >&5 echo "${ECHO_T}$ld_shlibs" >&6 test "$ld_shlibs" = no && can_build_shared=no # Check hardcoding attributes. echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$hardcode_shlibpath_var" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi echo "$as_me:$LINENO: result: $hardcode_action" >&5 echo "${ECHO_T}$hardcode_action" >&6 striplib= old_striplib= echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi reload_cmds='$LD$reload_flag -o $output$reload_objs' test -z "$deplibs_check_method" && deplibs_check_method=unknown # PORTME Fill in your ld.so characteristics echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) version_type=linux if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can # not hardcode correct soname into executable. Probably we can # add versioning support to collect2, so additional links can # be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; *) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) dynamic_linker=no ;; # This must be Linux ELF. linux-gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos need_lib_prefix=no need_version=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case "$host_os" in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; *) dynamic_linker=no ;; esac echo "$as_me:$LINENO: result: $dynamic_linker" >&5 echo "${ECHO_T}$dynamic_linker" >&6 test "$dynamic_linker" = no && can_build_shared=no # Report the final consequences. echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $can_build_shared" >&5 echo "${ECHO_T}$can_build_shared" >&6 echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case "$host_os" in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac echo "$as_me:$LINENO: result: $enable_shared" >&5 echo "${ECHO_T}$enable_shared" >&6 echo "$as_me:$LINENO: checking whether to build static libraries" >&5 echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes echo "$as_me:$LINENO: result: $enable_static" >&5 echo "${ECHO_T}$enable_static" >&6 if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; cygwin* | mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; *) echo "$as_me:$LINENO: checking for shl_load" >&5 echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 if test "${ac_cv_func_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char shl_load (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else f = shl_load; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_shl_load=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_func_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 echo "${ECHO_T}$ac_cv_func_shl_load" >&6 if test $ac_cv_func_shl_load = yes; then lt_cv_dlopen="shl_load" else echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 if test "${ac_cv_lib_dld_shl_load+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { shl_load (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_dld_shl_load=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_dld_shl_load=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 if test $ac_cv_lib_dld_shl_load = yes; then lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" else echo "$as_me:$LINENO: checking for dlopen" >&5 echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 if test "${ac_cv_func_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. */ #include /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); char (*f) (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else f = dlopen; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_func_dlopen=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_func_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext fi echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 echo "${ECHO_T}$ac_cv_func_dlopen" >&6 if test $ac_cv_func_dlopen = yes; then lt_cv_dlopen="dlopen" else echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 if test "${ac_cv_lib_dl_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_dl_dlopen=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_dl_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 if test $ac_cv_lib_dl_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 if test "${ac_cv_lib_svld_dlopen+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { dlopen (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_svld_dlopen=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_svld_dlopen=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 if test $ac_cv_lib_svld_dlopen = yes; then lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 if test "${ac_cv_lib_dld_dld_link+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dld_link (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { dld_link (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_dld_dld_link=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_dld_dld_link=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 if test $ac_cv_lib_dld_dld_link = yes; then lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 if test "${lt_cv_dlopen_self+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 echo "${ECHO_T}$lt_cv_dlopen_self" >&6 if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 if test "${lt_cv_dlopen_self_static+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 if test "${lt_cv_archive_cmds_need_lc+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else $rm conftest* echo 'static int dummy;' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_cv_prog_cc_wl compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$save_allow_undefined_flag else cat conftest.err 1>&5 fi fi echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 ;; esac fi need_lc=${lt_cv_archive_cmds_need_lc-yes} # The second clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then : else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. test -f Makefile && make "$ltmain" fi if test -f "$ltmain"; then trap "$rm \"${ofile}T\"; exit 1" 1 2 15 $rm -f "${ofile}T" echo creating $ofile # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS \ AR AR_FLAGS CC LD LN_S NM SHELL \ reload_flag reload_cmds wl \ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ thread_safe_flag_spec whole_archive_flag_spec libname_spec \ library_names_spec soname_spec \ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ old_striplib striplib file_magic_cmd export_symbols_cmds \ deplibs_check_method allow_undefined_flag no_undefined_flag \ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ global_symbol_to_c_name_address \ hardcode_libdir_flag_spec hardcode_libdir_separator \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do case $var in reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ postinstall_cmds | postuninstall_cmds | \ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done cat <<__EOF__ > "${ofile}T" #! $SHELL # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$need_lc # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # The default C compiler. CC=$lt_CC # Is the compiler the GNU C compiler? with_gcc=$GCC # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_pic_flag pic_mode=$pic_mode # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_compiler_c_o # Can we write directly to a .lo ? compiler_o_lo=$lt_compiler_o_lo # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_link_static_flag # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$fix_srcfile_path" # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "${ofile}T" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac case $host_os in cygwin* | mingw* | pw32* | os2*) cat <<'EOF' >> "${ofile}T" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments # /* impgen.c starts here */ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) mv -f "${ofile}T" "$ofile" || \ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") chmod +x "$ofile" fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion PERL="" if test "X$GCC" = "Xyes"; then for ac_prog in perl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_PERL+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$PERL"; then ac_cv_prog_PERL="$PERL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_PERL="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi PERL=$ac_cv_prog_PERL if test -n "$PERL"; then echo "$as_me:$LINENO: result: $PERL" >&5 echo "${ECHO_T}$PERL" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$PERL" && break done fi if test -z "$AR"; then for ac_prog in ar xar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AR+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then echo "$as_me:$LINENO: result: $AR" >&5 echo "${ECHO_T}$AR" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AR" && break done test -n "$AR" || AR=":" fi if test -z "$SEARCH"; then echo "$as_me:$LINENO: checking how make searches directories" >&5 echo $ECHO_N "checking how make searches directories... $ECHO_C" >&6 while true; do #for break cat >maketest </dev/null 2>&1; then SEARCH_RULE='VPATH=' SEARCH_SEP=' ' echo "$as_me:$LINENO: result: VPATH=DIR1 DIR2 ..." >&5 echo "${ECHO_T}VPATH=DIR1 DIR2 ..." >&6 break fi cat >maketest </dev/null 2>&1; then SEARCH_RULE='VPATH=' SEARCH_SEP=':' echo "$as_me:$LINENO: result: VPATH=DIR1:DIR2:..." >&5 echo "${ECHO_T}VPATH=DIR1:DIR2:..." >&6 break fi cat >maketest </dev/null 2>&1; then SEARCH_RULE='.PATH: ' SEARCH_SEP=' ' echo "$as_me:$LINENO: result: .PATH: DIR1 DIR2 ..." >&5 echo "${ECHO_T}.PATH: DIR1 DIR2 ..." >&6 break fi SEARCH_RULE='## SEARCH DISABLED: ' SEARCH_SEP=' ' echo "$as_me:$LINENO: result: it doesn't" >&5 echo "${ECHO_T}it doesn't" >&6 if test ! -f configure; then { { echo "$as_me:$LINENO: error: ${MAKE-make} requires the build and source directories to be the same" >&5 echo "$as_me: error: ${MAKE-make} requires the build and source directories to be the same" >&2;} { (exit 1); exit 1; }; } fi break done rm maketest fi echo "$as_me:$LINENO: checking if should build only statically linked executables" >&5 echo $ECHO_N "checking if should build only statically linked executables... $ECHO_C" >&6 # Check whether --enable-static_exec or --disable-static_exec was given. if test "${enable_static_exec+set}" = set; then enableval="$enable_static_exec" STATIC_EXEC=$enableval fi; if test "X$STATIC_EXEC" = "Xyes"; then echo "yes" LT_STATIC_EXEC="-all-static" else echo "no" LT_STATIC_EXEC="" fi for ac_prog in f90 pgf90 xlf90 f95 g95 xlf95 do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_F9X+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$F9X"; then ac_cv_prog_F9X="$F9X" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_F9X="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi F9X=$ac_cv_prog_F9X if test -n "$F9X"; then echo "$as_me:$LINENO: result: $F9X" >&5 echo "${ECHO_T}$F9X" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$F9X" && break done test -z "$F9X" && { { echo "$as_me:$LINENO: error: no acceptable f9X compiler found in \$PATH" >&5 echo "$as_me: error: no acceptable f9X compiler found in \$PATH" >&2;} { (exit 1); exit 1; }; } echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works" >&5 echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) works... $ECHO_C" >&6 ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross cat > conftest.$ac_ext << EOF program conftest end EOF if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -s conftest${ac_exeext}; then ac_cv_prog_f9x_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_f9x_cross=no else ac_cv_prog_f9x_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_f9x_works=no fi rm -fr conftest* ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_works" >&5 echo "${ECHO_T}$ac_cv_prog_f9x_works" >&6 if test $ac_cv_prog_f9x_works = no; then { { echo "$as_me:$LINENO: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&5 echo "$as_me: error: installation or configuration problem: Fortran 9X compiler cannot create executables." >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler" >&5 echo $ECHO_N "checking whether the Fortran 9X compiler ($F9X $FFLAGS $LDFLAGS) is a cross-compiler... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_cross" >&5 echo "${ECHO_T}$ac_cv_prog_f9x_cross" >&6 cross_compiling=$ac_cv_prog_f9x_cross echo "$as_me:$LINENO: checking whether we are using GNU Fortran 95" >&5 echo $ECHO_N "checking whether we are using GNU Fortran 95... $ECHO_C" >&6 if test "${ac_cv_prog_g9x+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat > conftest.fpp <&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_g9x=yes else ac_cv_prog_g9x=no fi fi echo "$as_me:$LINENO: result: $ac_cv_prog_g9x" >&5 echo "${ECHO_T}$ac_cv_prog_g9x" >&6 if test $ac_cv_prog_g9x = yes; then G9X=yes ac_test_FFLAGS="${FFLAGS+set}" ac_save_FFLAGS="$FFLAGS" FFLAGS= echo "$as_me:$LINENO: checking whether $F9X accepts -g" >&5 echo $ECHO_N "checking whether $F9X accepts -g... $ECHO_C" >&6 if test "${ac_cv_prog_f9x_g+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat > conftest.f << EOF program conftest end EOF if test -z "`$F9X -g -c conftest.f 2>&1`"; then ac_cv_prog_f9x_g=yes else ac_cv_prog_f9x_g=no fi rm -f conftest* fi echo "$as_me:$LINENO: result: $ac_cv_prog_f9x_g" >&5 echo "${ECHO_T}$ac_cv_prog_f9x_g" >&6 if test "$ac_test_FFLAGS" = set; then FFLAGS="$ac_save_FFLAGS" elif test $ac_cv_prog_f9x_g = yes; then FFLAGS="-g -O2" else FFLAGS="-O2" fi else G9X= test "${FFLAGS+set}" = set || FFLAGS="-g" fi echo "$as_me:$LINENO: checking what $F9X does with modules" >&5 echo $ECHO_N "checking what $F9X does with modules... $ECHO_C" >&6 ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&1 if test "$modfiles" = file.o; then echo $ac_n "checking whether $F9X -em is saner""... $ac_c" 1>&6 OLD_FFLAGS=$FFLAGS FFLAGS="$FFLAGS -em" eval $ac_compile modfiles="" for f in file.o module.mod MODULE.mod module.M MODULE.M; do test -f $f && modfiles="$f" done if test "$modfiles" = "file.o"; then FFLAGS=$OLD_FFLAGS echo no 6>&1 else echo yes 6>&1 fi fi cd .. echo "$as_me:$LINENO: checking how $F9X finds modules" >&5 echo $ECHO_N "checking how $F9X finds modules... $ECHO_C" >&6 for flag in "-I" "-M" "-p"; do cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then F9XMODFLAG=$flag break fi done if test -n "$F9XMODFLAG"; then echo $F9XMODFLAG 1>&6 FFLAGS="$F9XMODFLAG. $F9XMODFLAG../src $FFLAGS" else echo unknown 1>&6 fi rm -rf conftest* ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_cv_lib_z_compress="" # Check whether --with-zlib or --without-zlib was given. if test "${with_zlib+set}" = set; then withval="$with_zlib" else withval=yes fi; case "$withval" in yes) for ac_header in zlib.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 if test "${ac_cv_lib_z_compress2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { compress2 (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 if test $ac_cv_lib_z_compress2 = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBZ 1 _ACEOF LIBS="-lz $LIBS" fi ;; no) echo "$as_me:$LINENO: checking for GNU zlib" >&5 echo $ECHO_N "checking for GNU zlib... $ECHO_C" >&6 echo "$as_me:$LINENO: result: suppressed" >&5 echo "${ECHO_T}suppressed" >&6 ;; *) case "$withval" in *,*) zlib_inc="`echo $withval |cut -f1 -d,`" zlib_lib="`echo $withval |cut -f2 -d, -s`" ;; *) if test -n "$withval"; then zlib_inc="$withval/include" zlib_lib="$withval/lib" fi ;; esac saved_CPPFLAGS="$CPPFLAGS" saved_LDFLAGS="$LDFLAGS" if test -n "$zlib_inc"; then CPPFLAGS="$CPPFLAGS -I$zlib_inc" fi for ac_header in zlib.h do as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` if eval "test \"\${$as_ac_Header+set}\" = set"; then echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 else # Is the header compilable? echo "$as_me:$LINENO: checking $ac_header usability" >&5 echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest.$ac_objext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_header_compiler=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f conftest.$ac_objext conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 echo "${ECHO_T}$ac_header_compiler" >&6 # Is the header present? echo "$as_me:$LINENO: checking $ac_header presence" >&5 echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include <$ac_header> _ACEOF if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ac_status=$? egrep -v '^ *\+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null; then if test -s conftest.err; then ac_cpp_err=$ac_c_preproc_warn_flag else ac_cpp_err= fi else ac_cpp_err=yes fi if test -z "$ac_cpp_err"; then ac_header_preproc=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 echo "${ECHO_T}$ac_header_preproc" >&6 # So? What about this header? case $ac_header_compiler:$ac_header_preproc in yes:no ) { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; no:yes ) { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};; esac echo "$as_me:$LINENO: checking for $ac_header" >&5 echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 if eval "test \"\${$as_ac_Header+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else eval "$as_ac_Header=$ac_header_preproc" fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 fi if test `eval echo '${'$as_ac_Header'}'` = yes; then cat >>confdefs.h <<_ACEOF #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else CPPFLAGS="$saved_CPPFLAGS" fi done if test -n "$zlib_lib"; then LDFLAGS="$LDFLAGS -L$zlib_lib" fi echo "$as_me:$LINENO: checking for compress2 in -lz" >&5 echo $ECHO_N "checking for compress2 in -lz... $ECHO_C" >&6 if test "${ac_cv_lib_z_compress2+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lz $LIBS" cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char compress2 (); #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { compress2 (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_lib_z_compress2=yes else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_lib_z_compress2=no fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress2" >&5 echo "${ECHO_T}$ac_cv_lib_z_compress2" >&6 if test $ac_cv_lib_z_compress2 = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_LIBZ 1 _ACEOF LIBS="-lz $LIBS" else LDFLAGS="$saved_LDFLAGS" fi ;; esac cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross PARALLEL="" RUNSERIAL="" RUNPARALLEL="" TESTPARALLEL="" case "$F9X" in mpif90) PARALLEL=mpif90 echo "$as_me:$LINENO: checking for mpirun" >&5 echo $ECHO_N "checking for mpirun... $ECHO_C" >&6 cmd=`echo $F9X |cut -f1 -d' '` if (echo $cmd |grep / >/dev/null); then path="`echo $cmd |sed 's/\(.*\)\/.*$/\1/'`" else for path in `echo $PATH |tr : ' '`; do if test -x $path/$cmd; then break; fi done fi if test -x $path/mpirun; then echo "$as_me:$LINENO: result: $path/mpirun" >&5 echo "${ECHO_T}$path/mpirun" >&6 RUNSERIAL="${RUNSERIAL:-none}" if test -z "$RUNPARALLEL"; then RUNPARALLEL="$path/mpirun -np \$\${NPROCS:=2}" fi else echo "$as_me:$LINENO: result: none" >&5 echo "${ECHO_T}none" >&6 fi ;; mpxlf | mpxlf_r | mpxlf90 | mpxlf90_r | mpxlf95 | mpxlf95_r) PARALLEL="$F9X" ;; *) ;; esac # Check whether --enable-parallel or --disable-parallel was given. if test "${enable_parallel+set}" = set; then enableval="$enable_parallel" fi; echo "$as_me:$LINENO: checking for parallel support files" >&5 echo $ECHO_N "checking for parallel support files... $ECHO_C" >&6 case "X-$enable_parallel" in X-|X-no|X-none) echo "$as_me:$LINENO: result: skipped" >&5 echo "${ECHO_T}skipped" >&6 ;; X-yes) echo "$as_me:$LINENO: result: provided by compiler" >&5 echo "${ECHO_T}provided by compiler" >&6 PARALLEL=yes ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : else : ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : else LDFLAGS="$saved_LDFLAGS" PARALLEL=no fi cd .. rm -rf conftest* fi cd .. rm -rf conftest* if test "X$PARALLEL" = "Xyes"; then ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : else : ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : else LDFLAGS="$saved_LDFLAGS" PARALLEL=no fi cd .. rm -rf conftest* fi cd .. rm -rf conftest* fi if test "X$PARALLEL" = "Xyes" && test -z "$RUNPARALLEL"; then RUNPARALLEL="mpirun -np \$\${NPROCS:=2}" fi ;; X-mpich) echo "$as_me:$LINENO: result: mpich" >&5 echo "${ECHO_T}mpich" >&6 { echo "$as_me:$LINENO: WARNING: *** Why aren't you using an mpicc compiler? ***" >&5 echo "$as_me: WARNING: *** Why aren't you using an mpicc compiler? ***" >&2;} PARALLEL=mpich ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : else LDFLAGS="$saved_LDFLAGS" { { echo "$as_me:$LINENO: error: no mpich library" >&5 echo "$as_me: error: no mpich library" >&2;} { (exit 1); exit 1; }; } fi cd .. rm -rf conftest* ;; *) echo "$as_me:$LINENO: result: error" >&5 echo "${ECHO_T}error" >&6 { { echo "$as_me:$LINENO: error: \'$enable_parallel\' is not a valid parallel search type" >&5 echo "$as_me: error: \'$enable_parallel\' is not a valid parallel search type" >&2;} { (exit 1); exit 1; }; } ;; esac if test -n "$PARALLEL"; then TESTPARALLEL=testpar fi ADD_PARALLEL_FILES="no" if test -n "$PARALLEL"; then echo "$as_me:$LINENO: checking prefix for running on one processor" >&5 echo $ECHO_N "checking prefix for running on one processor... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $RUNSERIAL" >&5 echo "${ECHO_T}$RUNSERIAL" >&6 echo "$as_me:$LINENO: checking prefix for running in parallel" >&5 echo $ECHO_N "checking prefix for running in parallel... $ECHO_C" >&6 echo "$as_me:$LINENO: result: $RUNPARALLEL" >&5 echo "${ECHO_T}$RUNPARALLEL" >&6 echo "$as_me:$LINENO: checking whether a simple MPI-IO program can be linked" >&5 echo $ECHO_N "checking whether a simple MPI-IO program can be linked... $ECHO_C" >&6 ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross test -d conftestdir || mkdir conftestdir cd conftestdir rm -rf * cat >conftest.$ac_ext <&5 (eval $ac_compile) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then : echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else : echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 { { echo "$as_me:$LINENO: error: 'unable to link a simple MPI-IO application'" >&5 echo "$as_me: error: 'unable to link a simple MPI-IO application'" >&2;} { (exit 1); exit 1; }; } fi cd .. rm -rf conftest* if test -z "$RUNPARALLEL"; then { { echo "$as_me:$LINENO: error: no way to run a parallel program" >&5 echo "$as_me: error: no way to run a parallel program" >&2;} { (exit 1); exit 1; }; } fi if test "X$RUNSERIAL" = "Xnone"; then RUNSERIAL= fi if test "X$RUNPARALLEL" = "Xnone"; then RUNPARALLEL= fi ADD_PARALLEL_FILES="yes" echo "$as_me:$LINENO: checking for MPI_Comm_c2f and MPI_Comm_f2c functions" >&5 echo $ECHO_N "checking for MPI_Comm_c2f and MPI_Comm_f2c functions... $ECHO_C" >&6 ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { MPI_Comm c_comm; MPI_Comm_c2f(c_comm) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cat >>confdefs.h <<\_ACEOF #define HAVE_MPI_MULTI_LANG_Comm 1 _ACEOF echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext echo "$as_me:$LINENO: checking for MPI_Info_c2f and MPI_Info_f2c functions" >&5 echo $ECHO_N "checking for MPI_Info_c2f and MPI_Info_f2c functions... $ECHO_C" >&6 cat >conftest.$ac_ext <<_ACEOF #line $LINENO "configure" #include "confdefs.h" #include #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif int main () { MPI_Info c_info; MPI_Info_c2f(c_info) ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 (eval $ac_link) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='test -s conftest$ac_exeext' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cat >>confdefs.h <<\_ACEOF #define HAVE_MPI_MULTI_LANG_Info 1 _ACEOF echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 else echo "$as_me: failed program was:" >&5 cat conftest.$ac_ext >&5 echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext ac_ext=f90 ac_compile='${F9X-f90} -c $FFLAGS conftest.$ac_ext 1>&5' ac_link='${F9X-f90} -o conftest${ac_exeext} $FFLAGS conftest.$ac_ext $LDFLAGS $LIBS 1>&5' cross_compiling=$ac_cv_prog_f9x_cross fi echo "$as_me:$LINENO: checking make" >&5 echo $ECHO_N "checking make... $ECHO_C" >&6 if test "`${MAKE-make} --version -f /dev/null 2>/dev/null |\ sed -n 1p|cut -c1-8`" = "GNU Make"; then echo "$as_me:$LINENO: result: GNU make" >&5 echo "${ECHO_T}GNU make" >&6 GMAKE=yes if test "X$GCC" = "Xyes"; then DEPEND=config/depend1 else DEPEND=config/depend2 fi else echo "$as_me:$LINENO: result: generic" >&5 echo "${ECHO_T}generic" >&6 fi if test -z "$DEPEND"; then echo "$as_me:$LINENO: checking how to include a makefile" >&5 echo $ECHO_N "checking how to include a makefile... $ECHO_C" >&6 cat >makeinc <' >maketest if (MAKE= ${MAKE-make} -f maketest foo) >/dev/null 2>&1; then echo "$as_me:$LINENO: result: .include " >&5 echo "${ECHO_T}.include " >&6 DEPEND=config/depend3 break fi echo 'include makeinc' >maketest if (${MAKE-make} -f maketest foo) >/dev/null 2>&1; then echo "$as_me:$LINENO: result: include FILE" >&5 echo "${ECHO_T}include FILE" >&6 DEPEND=config/depend4 break; fi echo "$as_me:$LINENO: result: you have a deficient make command" >&5 echo "${ECHO_T}you have a deficient make command" >&6 DEPEND=config/dependN break done rm makeinc maketest fi rm -f conftest core core.* *.core conftest.o conftest.c dummy.o $ac_clean_files DYNAMIC_DIRS="" if test -n "$LDFLAGS"; then for d in $LDFLAGS ; do case "$d" in -L*) d=`echo $d | sed -e 's/-L//g'` case "$d" in .*) d=${ROOT}/$d ;; esac DYNAMIC_DIRS="-R${d} $DYNAMIC_DIRS" ;; esac done fi COMMENCE=config/commence CONCLUDE=config/conclude if test -z "$SEARCH"; then SEARCH='$(srcdir) $(top_builddir)/src $(top_srcdir)/src' cmd='echo $SEARCH |sed "s/ /'$SEARCH_SEP'/g"' SEARCH="$SEARCH_RULE`eval $cmd`" fi if test "X$GMAKE" = "Xyes"; then SETX=":" else SETX="set -x" fi rm -f conftest conftest.o conftest.c core core.* *.core dummy.o mkdir ./config >/dev/null 2>&1 touch ./config/stamp1 PARALLEL_MAKE= if test -n "$TESTPARALLEL"; then PARALLEL_MAKE=$TESTPARALLEL/Makefile fi saved_no_create=$no_create no_create=yes ac_config_files="$ac_config_files config/depend1 config/depend2 config/depend3 config/depend4 config/dependN config/commence config/conclude Makefile src/H5fortran_types.f90 src/Makefile test/Makefile $PARALLEL_MAKE examples/Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overriden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if cmp -s $cache_file confcache; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi DEFS=-DHAVE_CONFIG_H : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi # NLS nuisances. # Support unset when possible. if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi (set +x; test -n "`(LANG=C; export LANG) 2>&1`") && { $as_unset LANG || test "${LANG+set}" != set; } || { LANG=C; export LANG; } (set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") && { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } || { LC_ALL=C; export LC_ALL; } (set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") && { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } || { LC_TIME=C; export LC_TIME; } (set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") && { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } || { LC_CTYPE=C; export LC_CTYPE; } (set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") && { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } || { LANGUAGE=C; export LANGUAGE; } (set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") && { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } || { LC_COLLATE=C; export LC_COLLATE; } (set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") && { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } || { LC_NUMERIC=C; export LC_NUMERIC; } (set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") && { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } || { LC_MESSAGES=C; export LC_MESSAGES; } # Name of the executable. as_me=`(basename "$0") 2>/dev/null || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conftest.sh echo "exit 0" >>conftest.sh chmod +x conftest.sh if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conftest.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; } exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by HDF5 $as_me 1.5.28, which was generated by GNU Autoconf 2.53. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ HDF5 config.status 1.5.28 configured by $0, generated by GNU Autoconf 2.53, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` shift set dummy "$ac_option" "$ac_optarg" ${1+"$@"} shift ;; -*);; *) # This is not an option, so the user has probably given explicit # arguments. ac_need_defaults=false;; esac case $1 in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion" exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;; _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) shift CONFIG_FILES="$CONFIG_FILES $1" ac_need_defaults=false;; --header | --heade | --head | --hea ) shift CONFIG_HEADERS="$CONFIG_HEADERS $1" ac_need_defaults=false;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # INIT-COMMANDS section. # _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "config/depend1" ) CONFIG_FILES="$CONFIG_FILES config/depend1" ;; "config/depend2" ) CONFIG_FILES="$CONFIG_FILES config/depend2" ;; "config/depend3" ) CONFIG_FILES="$CONFIG_FILES config/depend3" ;; "config/depend4" ) CONFIG_FILES="$CONFIG_FILES config/depend4" ;; "config/dependN" ) CONFIG_FILES="$CONFIG_FILES config/dependN" ;; "config/commence" ) CONFIG_FILES="$CONFIG_FILES config/commence" ;; "config/conclude" ) CONFIG_FILES="$CONFIG_FILES config/conclude" ;; "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/H5fortran_types.f90" ) CONFIG_FILES="$CONFIG_FILES src/H5fortran_types.f90" ;; "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; "test/Makefile" ) CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; "$PARALLEL_MAKE" ) CONFIG_FILES="$CONFIG_FILES $PARALLEL_MAKE" ;; "examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "src/H5config_fortran.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/H5config_fortran.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. : ${TMPDIR=/tmp} { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=$TMPDIR/cs$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@build@,$build,;t t s,@build_cpu@,$build_cpu,;t t s,@build_vendor@,$build_vendor,;t t s,@build_os@,$build_os,;t t s,@host@,$host,;t t s,@host_cpu@,$host_cpu,;t t s,@host_vendor@,$host_vendor,;t t s,@host_os@,$host_os,;t t s,@CPPFLAGS@,$CPPFLAGS,;t t s,@FFLAGS@,$FFLAGS,;t t s,@R_LARGE@,$R_LARGE,;t t s,@R_INTEGER@,$R_INTEGER,;t t s,@HSIZE_T@,$HSIZE_T,;t t s,@HSSIZE_T@,$HSSIZE_T,;t t s,@HID_T@,$HID_T,;t t s,@SIZE_T@,$SIZE_T,;t t s,@OBJECT_NAMELEN_DEFAULT_F@,$OBJECT_NAMELEN_DEFAULT_F,;t t s,@ROOT@,$ROOT,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t s,@ac_ct_CC@,$ac_ct_CC,;t t s,@EXEEXT@,$EXEEXT,;t t s,@OBJEXT@,$OBJEXT,;t t s,@CPP@,$CPP,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@LN_S@,$LN_S,;t t s,@ECHO@,$ECHO,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@PERL@,$PERL,;t t s,@AR@,$AR,;t t s,@LT_STATIC_EXEC@,$LT_STATIC_EXEC,;t t s,@F9X@,$F9X,;t t s,@F9XMODFLAG@,$F9XMODFLAG,;t t s,@F9XMODEXT@,$F9XMODEXT,;t t s,@PARALLEL@,$PARALLEL,;t t s,@RUNSERIAL@,$RUNSERIAL,;t t s,@RUNPARALLEL@,$RUNPARALLEL,;t t s,@TESTPARALLEL@,$TESTPARALLEL,;t t s,@ADD_PARALLEL_FILES@,$ADD_PARALLEL_FILES,;t t /@DEPEND@/r $DEPEND s,@DEPEND@,,;t t s,@DYNAMIC_DIRS@,$DYNAMIC_DIRS,;t t /@COMMENCE@/r $COMMENCE s,@COMMENCE@,,;t t /@CONCLUDE@/r $CONCLUDE s,@CONCLUDE@,,;t t s,@SEARCH@,$SEARCH,;t t s,@SETX@,$SETX,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { case "$ac_dir" in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac as_dummy="$ac_dir" for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do case $as_mkdir_dir in # Skip DOS drivespec ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir test -d "$as_incr_dir" || mkdir "$as_incr_dir" || { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; } ;; esac done; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo $f;; *) # Relative if test -f "$f"; then # Build tree echo $f elif test -f "$srcdir/$f"; then # Source tree echo $srcdir/$f else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in _ACEOF # Transform confdefs.h into two sed scripts, `conftest.defines' and # `conftest.undefs', that substitutes the proper values into # config.h.in to produce config.h. The first handles `#define' # templates, and the second `#undef' templates. # And first: Protect against being on the right side of a sed subst in # config.status. Protect against being in an unquoted here document # in config.status. rm -f conftest.defines conftest.undefs # Using a here document instead of a string reduces the quoting nightmare. # Putting comments in sed scripts is not portable. # # `end' is used to avoid that the second main sed command (meant for # 0-ary CPP macros) applies to n-ary macro definitions. # See the Autoconf documentation for `clear'. cat >confdef2sed.sed <<\_ACEOF s/[\\&,]/\\&/g s,[\\$`],\\&,g t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp t end s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp : end _ACEOF # If some macros were called several times there might be several times # the same #defines, which is useless. Nevertheless, we may not want to # sort them, since we want the *last* AC-DEFINE to be honored. uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >>conftest.undefs <<\_ACEOF s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, _ACEOF # Break up conftest.defines because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS echo ' :' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.defines >/dev/null do # Write a limited-size here document to $tmp/defines.sed. echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#define' lines. echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/defines.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail rm -f conftest.defines mv conftest.tail conftest.defines done rm -f conftest.defines echo ' fi # egrep' >>$CONFIG_STATUS echo >>$CONFIG_STATUS # Break up conftest.undefs because some shells have a limit on the size # of here documents, and old seds have small limits too (100 cmds). echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail while grep . conftest.undefs >/dev/null do # Write a limited-size here document to $tmp/undefs.sed. echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS # Speed up: don't consider the non `#undef' echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS # Work around the forget-to-reset-the-flag bug. echo 't clr' >>$CONFIG_STATUS echo ': clr' >>$CONFIG_STATUS sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF sed -f $tmp/undefs.sed $tmp/in >$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in ' >>$CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail rm -f conftest.undefs mv conftest.tail conftest.undefs done rm -f conftest.undefs cat >>$CONFIG_STATUS <<\_ACEOF # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if cmp -s $ac_file $tmp/config.h 2>/dev/null; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { case "$ac_dir" in [\\/]* | ?:[\\/]* ) as_incr_dir=;; *) as_incr_dir=.;; esac as_dummy="$ac_dir" for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do case $as_mkdir_dir in # Skip DOS drivespec ?:) as_incr_dir=$as_mkdir_dir ;; *) as_incr_dir=$as_incr_dir/$as_mkdir_dir test -d "$as_incr_dir" || mkdir "$as_incr_dir" || { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5 echo "$as_me: error: cannot create \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; } ;; esac done; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be # absolute. ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd` ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in default-1 ) echo "creating src/H5pubconf_fortran.h" sed 's/#define /#define H5_/' < src/H5config_fortran.h |\ sed 's/#undef /#undef H5_/' > pubconf_fortran if test ! -f src/H5pubconf_fortran.h; then /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h elif (diff pubconf_fortran src/H5pubconf_fortran.h >/dev/null); then /bin/rm -f pubconf_fortran echo "src/H5pubconf_fortran.h is unchanged" else /bin/mv -f pubconf_fortran src/H5pubconf_fortran.h fi ;; esac done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: exec 5>/dev/null $SHELL $CONFIG_STATUS || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi no_create=$saved_no_create touch ./config/stamp2 test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1