HDF5 History ============ This file contains development history of HDF5 1.8 branch 24. Release Information for hdf5-1.8.22 23. Release Information for hdf5-1.8.21 22. Release Information for hdf5-1.8.20 21. Release Information for hdf5-1.8.19 20. Release Information for hdf5-1.8.18 19. Release Information for hdf5-1.8.17 18. Release Information for hdf5-1.8.16 17. Release Information for hdf5-1.8.15 16. Release Information for hdf5-1.8.14 15. Release Information for hdf5-1.8.13 14. Release Information for hdf5-1.8.12 13. Release Information for hdf5-1.8.11 12. Release Information for hdf5-1.8.10-patch1 11. Release Information for hdf5-1.8.10 10. Release Information for hdf5-1.8.9 09. Release Information for hdf5-1.8.8 08. Release Information for hdf5-1.8.7 07. Release Information for hdf5-1.8.6 06. Release Information for hdf5-1.8.5 05. Release Information for hdf5-1.8.4 04. Release Information for hdf5-1.8.3 03. Release Information for hdf5-1.8.2 02. Release Information for hdf5-1.8.1 01. Release Information for hdf5-1.8.0 [Search on the string '%%%%' for section breaks of each release.] %%%%1.8.22%%%% HDF5 version 1.8.22 released on 2021-02-05 ================================================================================ Notice: HDF5 1.8.22 will be followed later in 2021 by HDF5 1.8.23, the final release of HDF5 1.8. HDF5 1.10 and HDF5 1.12 are currently available. Detailed information about these releases can be found at: https://portal.hdfgroup.org/display/HDF5/Release+Specific+Information INTRODUCTION ============ This document describes the differences between this release and the previous HDF5 release. It contains information on the platforms tested and known problems in this release. For more details check the HISTORY*.txt files in the HDF5 source. Note that documentation in the links below will be updated at the time of each final release. Links to HDF5 documentation can be found on The HDF5 web page: https://portal.hdfgroup.org/display/HDF5/HDF5 The official HDF5 releases can be obtained from: https://portal.hdfgroup.org/display/support/HDF5+1.8.22 Changes from Release to Release and New Features in the HDF5-1.8.x release series can be found at: https://portal.hdfgroup.org/display/HDF5/HDF5+Application+Developer%27s+Guide If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.21 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems - CMake vs. Autotools installations New Features ============ Configuration: ------------- - CMake option to build the HDF filter plugins project as an external project The HDF filter plugins project is a collection of registered compression filters that can be dynamically loaded when needed to access data stored in an hdf5 file. This CMake-only option allows the plugins to be built and distributed with the hdf5 library and tools. Like the options for szip and zlib, either a tgz file or a git repository can be specified for the source. The option was refactored to use the CMake FetchContent process. This allows more control over the filter targets, but required external project command options to be moved to a CMake include file, HDF5PluginCache.cmake. It also allows the filter examples to be used as tests for operation of the filter plugins. (ADB - 2020/12/10, OESS-98) - CMake option to use MSVC naming conventions with MinGW HDF5_MSVC_NAMING_CONVENTION option enables using MSVC naming conventions when using a MinGW toolchain (xan - 2020/10/30) - CMake option to statically link gcc libs with MinGW HDF5_MINGW_STATIC_GCC_LIBS allows statically linking libg/libstdc++ with the MinGW toolchain (xan - 2020/10/30) - CMake option to build the HDF filter plugins project as an external project The HDF filter plugins project is a collection of registered compression filters that can be dynamically loaded when needed to access data stored in an hdf5 file. This CMake-only option allows the plugins to be built and distributed with the hdf5 library and tools. Like the options for szip and zlib, either a tgz file or a git repository can be specified for the source. The necessary options are (see the INSTALL_CMake.txt file): HDF5_ENABLE_PLUGIN_SUPPORT PLUGIN_TGZ_NAME or PLUGIN_GIT_URL There are more options necessary for various filters and the plugin project documents should be referenced. (ADB - 2020/10/16, OESS-98) - Added CMake option to format source files HDF5_ENABLE_FORMATTERS option will enable creation of targets using the pattern - HDF5_*_SRC_FORMAT - where * corresponds to the source folder or tool folder. All sources can be formatted by executing the format target; make format (ADB - 2020/09/24) - CMake option to link the generated Fortran MOD files into the include directory. The Fortran generation of MOD files by a Fortran compile can produce different binary files between SHARED and STATIC compiles with different compilers and/or different platforms. Note that it has been found that different versions of Fortran compilers will produce incompatible MOD files. Currently, CMake will locate these MOD files in subfolders of the include directory and add that path to the Fortran library target in the CMake config file, which can be used by the CMake find library process. For other build systems using the binary from a CMake install, a new CMake configuration can be used to copy the pre-chosen version of the Fortran MOD files into the install include directory. The default will depend on the configuration of BUILD_STATIC_LIBS and BUILD_SHARED_LIBS: YES YES Default to SHARED YES NO Default to STATIC NO YES Default to SHARED NO NO Default to SHARED The defaults can be overriden by setting the config option HDF5_INSTALL_MOD_FORTRAN to one of NO, SHARED, or STATIC (ADB - 2020/07/9, HDFFV-11116) - CMake option to use AEC (open source SZip) library instead of SZip The open source AEC library is a replacement library for SZip. In order to use it for hdf5 the libaec CMake source was changed to add "-fPIC" and exclude test files. Autotools does not build the compression libraries within hdf5 builds. CMake requires new option USE_LIBAEC to compensate for the different files produced by AEC build. (ADB - 2020/04/22, OESS-65) - CMake ConfigureChecks.cmake file now uses CHECK_STRUCT_HAS_MEMBER Some handcrafted tests in HDFTests.c has been removed and the CMake CHECK_STRUCT_HAS_MEMBER module has been used. (ADB - 2020/03/24, TRILAB-24) - Both build systems use same set of warnings flags GNU C, C++ and gfortran warnings flags were moved to files in a config sub-folder named gnu-warnings. Flags that only are available for a specific version of the compiler are in files named with that version. Clang C warnings flags were moved to files in a config sub-folder named clang-warnings. Intel C, Fortran warnings flags were moved to files in a config sub-folder named intel-warnings. There are flags in files named "error-xxx" with warnings that may be promoted to errors. Some source files may still need fixes. There are also pairs of files named "developer-xxx" and "no-developer-xxx" that are chosen by the CMake option:HDF5_ENABLE_DEV_WARNINGS or the configure option:--enable-developer-warnings. In addition, CMake no longer applies these warnings for examples. (ADB - 2020/03/24, TRILAB-192) - Update CMake minimum version to 3.12 Updated CMake minimum version to 3.12 and added version checks for Windows features. (ADB - 2020/02/05, TRILABS-142) - Fixed CMake include properties for Fortran libraries Corrected the library properties for Fortran to use the correct path for the Fortran module files. (ADB - 2020/02/04, HDFFV-11012) - Added common warnings files for gnu and intel Added warnings files to use one common set of flags during configure for both autotools and CMake build systems. The initial implementation only affects a general set of flags for gnu and intel compilers. (ADB - 2020/01/17) - Added new options to CMake for control of testing Added CMake options (default ON); HDF5_TEST_SERIAL AND/OR HDF5_TEST_PARALLEL combined with: HDF5_TEST_TOOLS HDF5_TEST_EXAMPLES HDF5_TEST_FORTRAN HDF5_TEST_CPP (ADB - 2020/01/15, HDFFV-11001) - Added Clang sanitizers to CMake for analyzer support if compiler is clang. Added CMake code and files to execute the Clang sanitizers if HDF5_ENABLE_SANITIZERS is enabled and the USE_SANITIZER option is set to one of the following: Address Memory MemoryWithOrigins Undefined Thread Leak 'Address;Undefined' (ADB - 2019/12/12, TRILAB-135) - Update CMake for VS2019 support CMake added support for VS2019 in version 3.15. Changes to the CMake generator setting required changes to scripts. Also updated version references in CMake files as necessary. (ADB - 2019/11/18, HDFFV-10962) - Add options to enable or disable building tools and tests Configure options --enable-tests and --enable-tools were added for autotools configure. These options are enabled by default, and can be disabled with either --disable-tests (or tools) or --enable-tests=no (or --enable-tools=no). Build time is reduced ~20% when tools are disabled, 35% when tests are disabled, 45% when both are disabled. Reenabling them after the initial build requires running configure again with the option(s) enabled. (DAP - 2019/07/24, HDFFV-9976) - Update CMake tests to use FIXTURES CMake test fixtures allow setup/cleanup tests and other dependency requirements as properties for tests. This is more flexible for modern CMake code. (ADB - 2019/07/23, HDFFV-10529) - Windows PDB files are always installed There are build configuration or flag settings for Windows that may not generate PDB files. If those files are not generated then the install utility will fail because those PDB files are not found. An optional variable, DISABLE_PDB_FILES, was added to not install PDB files. (ADB - 2019/07/17, HDFFV-10424) - Add mingw CMake support with a toolchain file There have been a number of mingw issues that have been linked under HDFFV-10845. It has been decided to implement the CMake cross-compiling technique of toolchain files. We will use a linux platform with the mingw compiler stack for testing. Only the C language is fully supported, and the error tests are skipped. The C++ language works for static but shared builds have a shared library issue with the mingw Standard Exception Handling library, which is not available on Windows. Fortran has a common cross-compile problem with the fortran configure tests. (ADB - 2019/07/12, HDFFV-10845, HDFFV-10595) - Windows PDB files are installed incorrectly For static builds, the PDB files for windows should be installed next to the static libraries in the lib folder. Also the debug versions of libraries and PDB files are now correctly built using the default CMAKE_DEBUG_POSTFIX setting. (ADB - 2019/07/09, HDFFV-10581) - Add option to build only shared libs A request was made to prevent building static libraries and only build shared. A new option was added to CMake, ONLY_SHARED_LIBS, which will skip building static libraries. Certain utility functions will build with static libs but are not published. Tests are adjusted to use the correct libraries depending on SHARED/STATIC settings. (ADB - 2019/06/12, HDFFV-10805) - Change tools tests to search the error stack There are some use cases which can cause the error stack of tools to be different then the expected output. These tests now use grepTest.cmake; this was changed to allow the error file to be searched for an expected string. (ADB - 2019/04/15, HDFFV-10741) - Add toolchain and cross-compile support Added info on using a toolchain file to INSTALL_CMAKE.txt. A toolchain file is also used in cross-compiling, which requires CMAKE_CROSSCOMPILING_EMULATOR to be set. To help with cross-compiling the fortran configure process, the HDF5UseFortran.cmake file macros were improved. Fixed a Fortran configure file issue that incorrectly used #cmakedefine instead of #define. (ADB - 2018/10/04, HDFFV-10594) - Add warnings flags for Intel compilers Identified Intel compiler specific warnings flags that should be used instead of GNU flags. (ADB - 2018/10/04, TRILABS-21) - Add default rpath to targets Default rpaths should be set in shared executables and libraries to allow the use of loading dependent libraries without requiring LD_LIBRARY_PATH to be set. The default path should be relative using @rpath on osx and $ORIGIN on linux. Windows is not affected. (ADB - 2018/09/26, HDFFV-10594) Library ------- - Improved performance of H5Sget_select_elem_pointlist Modified library to cache the point after the last block of points retrieved by H5Sget_select_elem_pointlist, so a subsequent call to the same function to retrieve the next block of points from the list can proceed immediately without needing to iterate over the point list. (NAF - 2021/01/19) - Added S3 and HDFS Virtual File Drivers (VFDs) to HDF5 These new VFDs have been added in HDF5-1.8.22. Instructions to enable them when configuring HDF5 on Linux and Mac may be found at https://portal.hdfgroup.org/display/HDF5/Virtual+File+Drivers+-+S3+and+HDFS. Installing on Windows requires CMake 3.13 and the following additional setup. Install openssl library (with dev files); from "Shining Light Productions". msi package preferred. PATH should have been updated with the installation dir. set ENV variable OPENSSL_ROOT_DIR to the installation dir. set ENV variable OPENSSL_CONF to the cfg file, likely %OPENSSL_ROOT_DIR%\bin\openssl.cfg Install libcurl library (with dev files); download the latest released version using git: https://github.com/curl/curl.git Open a Visual Studio Command prompt change to the libcurl root folder run the "buildconf.bat" batch file change to the winbuild directory nmake /f Makefile.vc mode=dll MACHINE=x64 copy libcurl-vc-x64-release-dll-ipv6-sspi-winssl dir to C:\curl (installation dir) set ENV variable CURL_ROOT to C:\curl (installation dir) update PATH ENV variable to %CURL_ROOT%\bin (installation bin dir). the aws credentials file should be in %USERPROFILE%\.aws folder set the ENV variable "HDF5_ROS3_TEST_BUCKET_URL=https://s3.us-east-2.amazonaws.com/hdf5ros3" (ADB - 2019/09/12, HDFFV-10854) - Allow pre-generated H5Tinit.c and H5make_libsettings.c to be used. Rather than always running H5detect and generating H5Tinit.c and H5make_libsettings.c, supply a location for those files with CMake variables HDF5_USE_PREGEN and HDF5_USE_PREGEN_DIR. See release_docs/README_HPC section VI "Other cross compiling options". (ADB - 2018/09/18, HDFFV-10332) Parallel Library ---------------- - None Tools ----- - None High-Level APIs --------------- - None Fortran API ----------- - Corrected INTERFACE INTENT(IN) to INTENT(OUT) for buf_size in h5fget_file_image_f. (MSB - 2020/2/18, HDFFV-11029) C++ API ------- - None High-Level APIs --------------- - None Support for New Platforms, Languages, and Compilers =================================================== - Added support for macOS High Sierra 10.13.6 with Apple LLVM version 10.0.0 (clang-1000.10.44.4) and gfortran GNU Fortran (GCC) 6.3.0 - Added support for macOS Mojave 10.14.6 with Apple LLVM version 10.0.1 (clang-1001.0.46.4) and gfortran GNU Fortran (GCC) 6.3.0 - Added support for Intel icc/icpc/ifort version 19.0.4.233 20190416 - Added support for MPICH 3.3 compiled with GCC 7.2.0 - Added support for NAG Fortran Compiler Release 7.0(Yurakuchho) Build 7011 - Added support for OpenMPI 4.0.0 compiled with GCC 7.2.0 - Added support for Visual Studio 2019 w/ Intel Fortran 19 (cmake) - Added support for Visual Studio 2019 w/ MSMPI 10.1 (cmake) Bug Fixes since HDF5-1.8.21 =========================== Configuration ------------- - Correct option for default API version CMake options for default API version are not mutually exclusive. Change the multiple BOOL options to a single STRING option with the strings; v16, v18. (ADB - 2019/08/12, HDFFV-10879) - Fixes Autotools determination of the stat struct having an st_blocks field A missing parenthesis in an autoconf macro prevented building the test code used to determine if the stat struct contains the st_blocks field. Now that the test functions correctly, the H5_HAVE_STAT_ST_BLOCKS #define found in H5pubconf.h will be defined correctly on both the Autotools and CMake. This #define is only used in the tests and does not affect the HDF5 C library. (DER - 2021/07/01, HDFFV-11201) Library ------- - Fixed issues CVE-2018-14033 and CVE-2018-11206 h5dump aborted when buffer size was corrupted, causing buffer over-read. Checks for reading past the end of the buffer were added to prevent the crashes and h5dump now simply fails with an error message when this error condition occurs. (BMR - 2020/12/16, HDFFV-10480 and HDFFV-11159) - Fixed a segmentation fault A segmentation fault occurred with a Mathworks corrupted file. A detection of accessing a null pointer was added to prevent the problem. (BMR - 2020/12/14, HDFFV-11150) - Explicitly declared dlopen to use RTLD_LOCAL dlopen documentation states that if neither RTLD_GLOBAL nor RTLD_LOCAL are specified, then the default behavior is unspecified. The default on linux is usually RTLD_LOCAL while macos will default to RTLD_GLOBAL. (ADB - 2020/08/12, HDFFV-11127) - Fixed issues CVE-2018-13870 and CVE-2018-13869 When a buffer overflow occurred because a name length was corrupted and became very large, h5dump crashed on memory access violation. A check for reading past the end of the buffer was added to multiple locations to prevent the crashes and h5dump now simply fails with an error message when this error condition occurs. (BMR - 2020/7/31, HDFFV-11120 and HDFFV-11121) - Fixed the segmentation fault when reading attributes with multiple threads It was reported that the reading of attributes with variable length string datatype will crash with segmentation fault particularly when the number of threads is high (>16 threads). The problem was due to the file pointer that was set in the variable length string datatype for the attribute. That file pointer was already closed when the attribute was accessed. The problem was fixed by setting the file pointer to the current opened file pointer when the attribute was accessed. Similar patch up was done before when reading dataset with variable length string datatype. (VC - 2020/07/13, HDFFV-11080) - Fixed CVE-2018-17435 The tool h52gif produced a segfault when the size of an attribute message was corrupted and caused a buffer overflow. The problem was fixed by verifying the attribute message's size against the buffer size before accessing the buffer. h52gif was also fixed to display the failure instead of silently exiting after the segfault was eliminated. (BMR - 2020/6/19, HDFFV-10591) - Fixed user-created data access properties not existing in the property list returned by H5Dget_access_plist. Thanks to Steven Varga for submitting a reproducer and a patch. (CJH - 2019/12/09, HDFFV-10934) - Fixed a bug that could cause an error or cause fill values to be incorrectly read from a dataset that was written to using H5Dwrite_chunk if the dataset was not closed after writing. (NAF - 2019/03/06, HDFFV-10716) - Fixed a potential invalid memory access and failure that could occur when decoding an unknown object header message (from a future version of the library). (NAF - 2019/01/07) - Allow H5detect and H5make_libsettings to take a file as an argument. Rather than only writing to stdout, add a command argument to name the file that H5detect and H5make_libsettings will use for output. Without an argument, stdout is still used, so backwards compatibility is maintained. (ADB - 2018/09/05, HDFFV-9059) - Inappropriate linking with deprecated MPI C++ libraries HDF5 does not define *_SKIP_MPICXX in the public headers, so applications can inadvertently wind up linking to the deprecated MPI C++ wrappers. MPICH_SKIP_MPICXX and OMPI_SKIP_MPICXX have both been defined in H5public.h so this should no longer be an issue. HDF5 makes no use of the deprecated MPI C++ wrappers. (DER - 2019/09/17, HDFFV-10893) Parallel Library ---------------- - None Performance ------------- - None Tools ----- - h5repack was fixed to repack the reference attributes properly. The code line that checks if the update of reference inside a compound datatype was misplaced outside the code block loop that carries out the check. In consequence, the next attribute that is not the reference type was repacked again as the reference type and caused the failure of repacking. The fix is to move the corresponding code line to the correct code block. (KY -2020/02/05, HDFFV-11014) - h5repack was fixed to repack datasets with external storage to other types of storage. New test added to repack files and verify the correct data using h5diff. (JS - 2019/09/25, HDFFV-10408) (ADB - 2019/10/02, HDFFV-10918) Fortran API ----------- - Added symbolic links libhdf5_hl_fortran.so to libhdf5hl_fortran.so and libhdf5_hl_fortran.a to libhdf5hl_fortran.a in hdf5/lib directory for autotools installs. These were added to match the name of the files installed by CMmake and the general pattern of hl lib files. We will change the names of the installed lib files to the matching name in the next major release. (LRK - 2019/05/09, HDFFV-10596) C++ API ------- - None High-Level APIs: --------------- - None Packet Table APIs: ------------------ - None Supported Platforms =================== Linux 3.10.0-1127.10.1.el7 gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) (echidna) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) Linux 2.6.32-573.18.1.el6 IBM XL C/C++ V13.1 #1 SMP ppc64 GNU/Linux IBM XL Fortran V15.1 (ostrich) Linux 3.10.0-327.10.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (jelly/kituo/moohan) Version 4.8.5 20150623 (Red Hat 4.8.5-39) Versions 4.9.3, 5.3.0, 6.3.0, 7.2.0 8.3.0, 9.1.0, 10.1.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.098 Build 20160721 MPICH 3.3 compiled with GCC 7.2.0 OpenMPI 4.0.0 compiled with GCC 7.2.0 NAG Fortran Compiler Release 7.0(Yurakuchho) Build 7011 SunOS 5.11 11.4.5.12.5.0 Sun C 5.15 SunOS_sparc 2017/05/30 32- and 64-bit Studio 12.6 Fortran 95 8.8 SunOS_sparc 2017/05/30 (hedgehog) Sun C++ 5.15 SunOS_sparc 2017/05/30 Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 18 (cmake) Visual Studio 2017 w/ Intel Fortran 19 (cmake) Visual Studio 2019 w/ Intel Fortran 19 (cmake) Visual Studio 2019 w/ MSMPI 10.1 (cmake) macOS High Sierra 10.13.6 Apple LLVM version 10.0.0 (clang-1000.10.44.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (bear) Intel icc/icpc/ifort version 19.0.4.233 20190416 macOS Mojave 10.14.6 Apple LLVM version 10.0.1 (clang-1001.0.46.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (bobcat) Intel icc/icpc/ifort version 19.0.4.233 20190416 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 10 y y/y n y y y Windows 10 x64 y y/y n y y y Mac OS X El Capitan 10.11.6 64-bit n y/y n y y y Mac OS Sierra 10.12.6 64-bit n y/y n y y y Mac OS X High Sierra 10.13.6 64-bit n y/y n y y y Mac OS X Mojave 10.14.6 64-bit n y/y n y y y CentOS 7.2 Linux 2.10.0 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-573.18.1.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X El Capitan 10.11.6 64-bit y n y y Mac OS Sierra 10.12.6 64-bit y n y y Mac OS X High Sierra 10.13.6 64-bit y n y y Mac OS X Mojave 10.14.6 64-bit y n y y CentOS 7.2 Linux 3.10.0 x86_64 PGI y y y y CentOS 7.2 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.2 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-573.18.1.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Versions 4.9.3, 5.3.0, 6.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 16.10-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.196 Build 20160721 MPICH 3.1.4 compiled with GCC 4.9.3 OpenMPI 2.0.1 compiled with GCC 4.9.3 Linux 2.6.32-573.18.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) Linux 3.10.0-327.18.2.el7 GNU C (gcc) and C++ (g++) compilers #1 SMP x86_64 GNU/Linux Version 4.8.5 20150623 (Red Hat 4.8.5-4) (jelly) with NAG Fortran Compiler Release 6.1(Tozai) GCC Version 7.1.0 OpenMPI 2.1.6-GCC-7.2.0-2.29, 3.1.3-GCC-7.2.0-2.29 Intel(R) C (icc) and C++ (icpc) compilers Version 17.0.0.098 Build 20160721 with NAG Fortran Compiler Release 6.1(Tozai) Linux 3.10.0-327.10.1.el7 MPICH 3.1.4 compiled with GCC 4.9.3 #1 SMP x86_64 GNU/Linux (moohan) Linux-3.10.0-1127.0.0.1chaos openmpi-4.0.0 #1 SMP x86_64 GNU/Linux clang/3.9.0, 8.0.1 (quartz) gcc/7.3.0, 8.1.0 intel/16.0.4 Linux-4.14.0-115.10.1.1 spectrum-mpi/rolling-release #1 SMP ppc64le GNU/Linux clang/coral-2018.08.08 (lassen) gcc/7.3.1 xl/2019.02.07 Linux-4.12.14-150.52-default cray-mpich/7.7.10 #1 SMP x86_64 GNU/Linux gcc/7.3.0, 8.2.0 (cori) intel/19.0.3 Linux-4.4.180-94.107-default cray-mpich/7.7.6 # 1SMP x86_64 GNU/Linux gcc/8.3.0, 9.3.0 (mutrino) intel/19.0.4 Fedora33 5.10.10-200.fc33.x86_64 #1 SMP x86_64 GNU/Linux GNU gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9) GNU Fortran (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9) clang version 11.0.0 (Fedora 11.0.0-2.fc33) (cmake and autotools) Ubuntu20.10 5.8.0-41-generic-x86_64 #46-Ubuntu SMP x86_64 GNU/Linux GNU gcc (GCC) 10.2.0-13ubuntu1 GNU Fortran (GCC) 10.2.0-13ubuntu1 (cmake and autotools) SUSE15sp2 5.3.18-22-default #1 SMP x86_64 GNU/Linux GNU gcc (SUSE Linux) 7.5.0 GNU Fortran (SUSE Linux) 7.5.0 clang version 7.0.1 (tags/RELEASE_701/final 349238) (cmake and autotools) Mac OS X El Capitan 10.11.6 Apple LLVM version 7.3.0 (clang-703.0.29) 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM osx1011dev/osx1011test) Intel icc/icpc/ifort version 16.0.2 Mac OS Sierra 10.12.6 Apple LLVM version 8.1 (clang-802.0.42) 64-bit gfortran GNU Fortran (GCC) 7.4.0 (kite) Intel icc/icpc/ifort version 17.0.2 l macOS Big Sur 11.1 Apple clang version 12.0.0 (clang-1200.0.32.28) 64-bit gfortran GNU Fortran )Homebrew GCC 10.2.0) 10.2.0 (BIGSUR-1) Intel icc/icpc/ifort version 2021.1 SunOS 5.11 11.3 Sun C 5.15 SunOS_sparc 32- and 64-bit Sun Fortran 95 8.8 SunOS_sparc (emu) Known Problems ============== HDF5-1.8.22 binaries can replace the previous HDF5 version to run with applications compiled and linked with HDF5-1.8.21 and possibly HDF5 versions as early as 1.8.15. However, HDF5 checks versions in lib files against versions in header files used to compile the application and will cause the application to abort when they do not match. An environment variable HDF5_DISABLE_VERSION_CHECK can be set to 2 to skip the check, to 1 to warn but not abort, or to 0 for the default behavior, aborting when the HDF5 version in the lib files does not match the version in the header files. LRK - 2020/02/02 CMake files do not behave correctly with paths containing spaces. Do not use spaces in paths because the required escaping for handling spaces results in very complex and fragile build files. ADB - 2019/05/07 The dynamically loaded plugin test libraries require undefined references to HDF5 functions to be resolved at runtime in order to function properly. With autotools on CYGWIN this results in build errors, and we have not found a solution that satisfies both. Therefore the dynamically loaded plugin tests have been disabled on CYGWIN. Mac OS X 10.13 added additional subdirectory structure in .libs for shared libraries. Consequently "make check" will fail testing java and dynamically loaded plugin test libraries attempting to copy files from the previous locations in .libs directories. This will be addressed in the next release when support for the Mac OS X 10.13 platform is added. CPP ptable test fails on both VS2017 and VS2019 with Intel compiler, JIRA issue: HDFFV-10628. This test will pass with VS2015 with Intel compiler. Various tests in dt_arith, fillval, and dtypes failed with core dump during integer conversion on SunOS 5.11 with Sun C 5.15 SunOS_sparc in 64-bit mode. It appears that these failures were caused by invalid alignment, which is under investigation. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. CMake vs. Autotools installations ================================= While both build systems produce similar results, there are differences. Each system produces the same set of folders on linux (only CMake works on standard Windows); bin, include, lib and share. Autotools places the COPYING and RELEASE.txt file in the root folder, CMake places them in the share folder. The bin folder contains the tools and the build scripts. Additionally, CMake creates dynamic versions of the tools with the suffix "-shared". Autotools installs one set of tools depending on the "--enable-shared" configuration option. build scripts ------------- Autotools: h5c++, h5cc, h5fc CMake: h5c++, h5cc, h5hlc++, h5hlcc The include folder holds the header files and the fortran mod files. CMake places the fortran mod files into separate shared and static subfolders, while Autotools places one set of mod files into the include folder. Because CMake produces a tools library, the header files for tools will appear in the include folder. The lib folder contains the library files, and CMake adds the pkgconfig subfolder with the hdf5*.pc files used by the bin/build scripts created by the CMake build. CMake separates the C interface code from the fortran code by creating C-stub libraries for each Fortran library. In addition, only CMake installs the tools library. The names of the szip libraries are different between the build systems. The share folder will have the most differences because CMake builds include a number of CMake specific files for support of CMake's find_package and support for the HDF5 Examples CMake project. %%%%1.8.21%%%% HDF5 version 1.8.21 released on 2018-06-04 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.20 and HDF5-1.8.21, and contains information on the platforms tested and known problems in HDF5-1.8.21. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.21 source code, documentation, and additional materials can be found on the HDF5 web page at: https://support.hdfgroup.org/HDF5/ The HDF5 1.8.21 release can be obtained from: https://support.hdfgroup.org/HDF5/release/obtain518.html User documentation for 1.8.21 can be accessed directly at this location: https://support.hdfgroup.org/HDF5/doc1.8/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: https://support.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.21 (current release) versus Release 1.8.20 https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.20 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - CMake Change minimum version to 3.10. This change removes the need to support a copy of the FindMPI.cmake module, which has been removed, along with its subfolder in the config/cmake_ext_mod location. (ADB - 2018/03/09) - CMake Add pkg-config file generation Added pkg-config file generation for the C, C++, HL, and HL C++ libraries. In addition, builds on linux will create h5cXXX scripts that use the pkg-config files. This is a limited implementation of a script like autotools h5cc. (ADB - 2018/03/08, HDFFV-4359) - CMake Refactor use of CMAKE_BUILD_TYPE for new variable, which understands the type of generator in use. Added new configuration macros to use new HDF_BUILD_TYPE variable. This variable is set correctly for the type of generator being used for the build. (ADB - 2018/01/08, HDFFV-10385, HDFFV-10296) C++ API ------- - The following C++ API wrappers have been added to class H5Location + H5Lcreate_soft: // Creates a soft link from link_name to target_name. void link(const char *target_name, const char *link_name,...) void link(const H5std_string& target_name,...) + H5Lcreate_hard: // Creates a hard link from new_name to curr_name. void link(const char *curr_name, const Group& new_loc,...) void link(const H5std_string& curr_name, const Group& new_loc,...) // Creates a hard link from new_name to curr_name in the same location. void link(const char *curr_name, const hid_t same_loc,...) void link(const H5std_string& curr_name, const hid_t same_loc,...) Note: previous version CommonFG::link will be deprecated. + H5Lcopy: // Copy an object from a group of file to another. void copyLink(const char *src_name, const Group& dst,...) void copyLink(const H5std_string& src_name, const Group& dst,...) // Copy an object from a group of file to the same location. void copyLink(const char *src_name, const char *dst_name,...) void copyLink(const H5std_string& src_name,...) + H5Lmove: // Rename an object in a group or file to a new location. void moveLink(const char* src_name, const Group& dst,...) void moveLink(const H5std_string& src_name, const Group& dst,...) // Rename an object in a group or file to the same location. void moveLink(const char* src_name, const char* dst_name,...) void moveLink(const H5std_string& src_name,...) Note: previous version CommonFG::move will be deprecated. + H5Ldelete: // Removes the specified link from this location. void unlink(const char *link_name, const LinkAccPropList& lapl = LinkAccPropList::DEFAULT) void unlink(const H5std_string& link_name, const LinkAccPropList& lapl = LinkAccPropList::DEFAULT) Note: An additional parameter is added to CommonFG::unlink and it is moved to H5Location. (BMR - 2018/05/11 - HDFFV-10445) - New property list subclasses Property list subclasses StrCreatPropList, LinkCreatPropList, and AttrCreatPropList are added for the C property list classes H5P_STRING_CREATE, H5P_LINK_CREATE, and H5P_ATTRIBUTE_CREATE. (BMR - 2018/05/11 - HDFFV-10445) - Another argument, LinkCreatPropList& lcpl, is added to the following functions for the use of link creation property list. Group createGroup(const char* name, size_t size_hint = 0, const LinkCreatPropList& lcpl = LinkCreatPropList::DEFAULT) Group createGroup(const H5std_string& name, size_t size_hint = 0, const LinkCreatPropList& lcpl = LinkCreatPropList::DEFAULT) (BMR - 2018/05/11 - HDFFV-10445) Support for New Platforms, Languages, and Compilers =================================================== - Added support for Visual Studio 2017 w/ Intel Fortran 18 on Windows 10 x64. Bug Fixes since HDF5-1.8.20 =========================== - If an HDF5 file contains a filter pipeline message with a 'number of filters' field that exceeds the maximum number of allowed filters, the error handling code will attempt to dereference a NULL pointer. This issue was reported to The HDF Group as issue #CVE-2017-17505. NOTE: The HDF5 C library cannot produce such a file. This condition should only occur in a corrupt (or deliberately altered) file or a file created by third-party software. This problem arose because the error handling code assumed that the 'number of filters' field implied that a dynamic array of that size had already been created and that the cleanup code should iterate over that array and clean up each element's resources. If an error occurred before the array has been allocated, this will not be true. This has been changed so that the number of filters is set to zero on errors. Additionally, the filter array traversal in the error handling code now requires that the filter array not be NULL. (DER - 2018/02/06, HDFFV-10354) - If an HDF5 file contains a filter pipeline message which contains a 'number of filters' field that exceeds the actual number of filters in the message, the HDF5 C library will read off the end of the read buffer. This issue was reported to The HDF Group as issue #CVE-2017-17506. NOTE: The HDF5 C library cannot produce such a file. This condition should only occur in a corrupt (or deliberately altered) file or a file created by third-party software. The problem was fixed by passing the buffer size with the buffer and ensuring that the pointer cannot be incremented off the end of the buffer. A mismatch between the number of filters declared and the actual number of filters will now invoke normal HDF5 error handling. (DER - 2018/02/26, HDFFV-10355) - If an HDF5 file contains a malformed compound datatype with a suitably large offset, the type conversion code can run off the end of the type conversion buffer, causing a segmentation fault. This issue was reported to The HDF Group as issue #CVE-2017-17507. NOTE: The HDF5 C library cannot produce such a file. This condition should only occur in a corrupt (or deliberately altered) file or a file created by third-party software. THE HDF GROUP WILL NOT FIX THIS BUG AT THIS TIME Fixing this problem would involve updating the publicly visible H5T_conv_t function pointer typedef and versioning the API calls which use it. We normally only modify the public API during major releases, so this bug will not be fixed at this time. (DER - 2018/02/26, HDFFV-10356) - If an HDF5 file contains a malformed compound type which contains a member of size zero, a division by zero error will occur while processing the type. This issue was reported to The HDF Group as issue #CVE-2017-17508. NOTE: The HDF5 C library cannot produce such a file. This condition should only occur in a corrupt (or deliberately altered) file or a file created by third-party software. Checking for zero before dividing fixes the problem. Instead of the division by zero, the normal HDF5 error handling is invoked. (DER - 2018/02/26, HDFFV-10357) - If an HDF5 file contains a malformed symbol table node that declares it contains more symbols than it actually contains, the library can run off the end of the metadata cache buffer while processing the symbol table node. This issue was reported to The HDF Group as issue #CVE-2017-17509. NOTE: The HDF5 C library cannot produce such a file. This condition should only occur in a corrupt (or deliberately altered) file or a file created by third-party software. Performing bounds checks on the buffer while processing fixes the problem. Instead of the segmentation fault, the normal HDF5 error handling is invoked. (DER - 2018/03/12, HDFFV-10358) Configuration ------------- - Library Moved the location of gcc attribute. The gcc attribute(no_sanitize), named as the macro HDF_NO_UBSAN, was located after the function name. Builds with GCC 7 did not indicate any problem, but GCC 8 issued errors. Moved the attribute before the function name, as required. (ADB 2018/05/22, HDFFV-10473) - CMake Update CMake commands configuration. A number of improvements were made to the CMake commands. Most changes simplify usage or eliminate unused constructs. Also, some changes support better cross-platform support. (ADB - 2018/02/01, HDFFV-10398) - CMake Correct usage of CMAKE_BUILD_TYPE variable. The use of the CMAKE_BUILD_TYPE is incorrect for multi-config generators (Visual Studio and XCode) and is optional for single config generators. Created a new macro to check GLOBAL PROPERTY -> GENERATOR_IS_MULTI_CONFIG Created two new HDF variable, HDF_BUILD_TYPE and HDF_CFG_BUILD_TYPE. Defaults for these variables is "Release". (ADB - 2018/01/10, HDFFV-10385) - CMake Add replacement of fortran flags if using static CRT. Added TARGET_STATIC_CRT_FLAGS call to HDFUseFortran.cmake file in config/cmake_ext_mod folder. (ADB - 2018/01/08, HDFFV-10334) Library ------- - Utility function can not handle lowercase Windows drive letters Added call to toupper function for drive letter. (ADB - 2017/12/18, HDFFV-10307) Tools ----- - h5repack h5repack changes the chunk parameters when a change of layout is not specified and a filter is applied. HDFFV-10297, HDFFV-10319 reworked code for h5repack and h5diff code in the tools library. The check for an existing layout was incorrectly placed into an if block and not executed. The check was moved into the normal path of the function. (ADB - 2018/02/21, HDFFV-10412) - h5dump the tools library will hide the error stack during file open. While this is preferable almost always, there are reasons to enable display of the error stack when a tool will not open a file. Adding an optional argument to the --enable-error-stack will provide this use case. As an optional argument it will not affect the operation of the --enable-error-stack. h5dump is the only tool to implement this change. (ADB - 2018/02/15, HDFFV-10384) - h5dump h5dump would output an indented blank line in the filters section. h5dump overused the h5tools_simple_prefix function, which is a function intended to account for the data index (x,y,z) option. Removed the function call for header information. (ADB - 2018/01/25, HDFFV-10396) - h5repack h5repack incorrectly searched internal object table for name. h5repack would search the table of objects for a name, if the name did not match it tried to determine if the name without a leading slash would match. The logic was flawed! The table stored names(paths) without a leading slash and did a strstr of the table path to the name. The assumption was that if there was a difference of one then it was a match, however "pressure" would match "/pressure" as well as "/pressure1", "/pressure2", etc. Changed logic to remove any leading slash and then do a full compare of the name. (ADB - 2018/01/18, HDFFV-10393) - h5repack h5repack failed to handle command line parameters for customer filters. User defined filter parameter conversions would fail when integers were represented on the command line with character strings larger than 9 characters. Increased local variable array for storing the current command line parameter to prevent buffer overflows. (ADB - 2018/01/17, HDFFV-10392) - h5diff h5diff seg faulted if comparing VL strings against fixed strings. Reworked solution for HDFFV-8625 and HDFFV-8639. Implemented the check for string objects of same type in the diff_can_type function by adding an if(tclass1 == H5T_STRING) block. This "if block" moves the same check that was added for attributes to this function, which is used by all object types. This function handles complex type structures. Also added a new test file in h5diffgentest for testing this issue and removed the temporary files used in the test scripts. (ADB - 2018/01/04, HDFFV-8745) C++ API ------- - Removal of memory leaks A private function was inadvertently called, causing memory leaks. This is now fixed. (BMR - 2018/04/12 - User reported in email) - Changes in exception classes Some exception classes are reorganized to reflect the HDF5 object hierarchy and allow customization. DataSetIException -> LocationException -> Exception DataTypeIException -> LocationException -> Exception GroupIException -> LocationException -> Exception AttributeIException -> LocationException -> Exception FileIException -> GroupIException -> LocationException -> Exception Member functions in H5Location and H5Object now throw specific exceptions associated with the invoking objects. (BMR - 2018/05/11) - H5Location::closeObjId is made static (BMR - 2018/05/11) - H5A wrappers in H5Location are removed as they have been in H5Object. (BMR - 2018/05/11) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus/mayll) Version 4.4.7 20120313 Versions 4.9.3, 5.3.0, 6.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 17.10-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.4.196 Build 20160721 MPICH 3.1.4 compiled with GCC 4.9.3 OpenMPI 2.0.1 compiled with GCC 4.9.3 Linux 2.6.32-573.18.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-327.10.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan/jelly Version 4.8.5 20150623 (Red Hat 4.8.5-4) Versions 4.9.3, 5.3.0, 6.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.4.196 Build 20170411 MPICH 3.1.4 compiled with GCC 4.9.3 NAG Fortran Compiler Release 6.1(Tozai) Build 6116 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Visual Studio 2015 w/ Intel C, Fortran 2017 (cmake) Visual Studio 2015 w/ MSMPI 8 (cmake) Windows 10 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Visual Studio 2017 w/ Intel Fortran 18 (cmake) Mac OS X Mavericks 10.9.5 Apple LLVM version 6.0 (clang-600.0.57) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple LLVM version 6.1 (clang-602.0.53) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Mac OS X El Capitan 10.11.6 Apple LLVM version 7.3.0 (clang-703.0.29) 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM osx1011dev/osx1011test) Intel icc/icpc/ifort version 16.0.2 Mac OS Sierra 10.12.6 Apple LLVM version 8.1 (clang-802.0.42) 64-bit gfortran GNU Fortran (GCC) 7.1.0 (kite) Intel icc/icpc/ifort version 17.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/n n y y y Windows 7 x64 Cygwin n y/n n y y y Windows 10 y y/y n y y y Windows 10 x64 y y/y n y y y Mac OS X Yosemite 10.10.5 64-bit n y/y n y y y Mac OS X El Capitan 10.11.6 64-bit n y/y n y y y Mac OS Sierra 10.12.6 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-573.18.1.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 7 x64 Cygwin n n n y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X Yosemite 10.10.5 64-bit y n y y Mac OS X El Capitan 10.11.6 64-bit y n y y Mac OS Sierra 10.12.6 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-573.18.1.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (mayll) Debian8.4.0 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1 x86_64 GNU/Linux gcc (Debian 4.9.2-10) 4.9.2 GNU Fortran (Debian 4.9.2-10) 4.9.2 (cmake and autotools) Fedora24 4.7.2-201.fc24.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) GNU Fortran (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) (cmake and autotools) CentOS 7.2 3.10.0-327.28.2.el7.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) (cmake and autotools) Ubuntu 16.04 4.4.0-38-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 GNU Fortran (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 (cmake and autotools) Known Problems ============== The dynamically loaded plugin test libraries require undefined references to HDF5 functions to be resolved at runtime in order to function properly. With autotools on CYGWIN this results in build errors, and we have not found a solution that satisfies both. Therefore the dynamically loaded plugin tests have been disabled on CYGWIN. Mac OS X 10.13 added additional subdirectory structure in .libs for shared libraries. Consequently "make check" will fail testing java and dynamically loaded plugin test libraries attempting to copy files from the previous locations in .libs directories. This will be addressed in the next release when support for the Mac OS X 10.13 platform is added. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. %%%%1.8.20%%%% HDF5 version 1.8.20 released on 2017-11-28 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.19 and HDF5-1.8.20, and contains information on the platforms tested and known problems in HDF5-1.8.20. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.20 source code, documentation, and additional materials can be found on the HDF5 web page at: https://support.hdfgroup.org/HDF5/ The HDF5 1.8.20 release can be obtained from: https://support.hdfgroup.org/HDF5/release/obtain518.html User documentation for 1.8.20 can be accessed directly at this location: https://support.hdfgroup.org/HDF5/doc1.8/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: https://support.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.20 (current release) versus Release 1.8.19 https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.20 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Tools ----- - h5diff h5diff has new option enable-error-stack. Updated h5diff with the --enable-error-stack argument, which enables the display of the hdf5 error stack. This completes the improvement to the main tools; h5copy, h5diff, h5dump, h5ls and h5repack. (ADB - 2017/08/30, HDFFV-9774) C++ API ------- - The following C++ API wrappers have been added to the C++ Library: // Creates a binary object description of this datatype. void DataType::encode() - C API H5Tencode() // Returns the decoded type from the binary object description. DataType::decode() - C API H5Tdecode() ArrayType::decode() - C API H5Tdecode() CompType::decode() - C API H5Tdecode() DataType::decode() - C API H5Tdecode() EnumType::decode() - C API H5Tdecode() FloatType::decode() - C API H5Tdecode() IntType::decode() - C API H5Tdecode() StrType::decode() - C API H5Tdecode() VarLenType::decode() - C API H5Tdecode() // Three overloaded functions to retrieve information about an object H5Location::getObjectInfo() - H5Oget_info()/H5Oget_info_by_name() (BMR - 2017/10/17, HDFFV-10175) - New constructors to open existing datatypes added in ArrayType, CompType, DataType, EnumType, FloatType, IntType, StrType, and VarLenType. (BMR - 2017/10/17, HDFFV-10175) - A document is added to the HDF5 C++ API Reference Manual to show the mapping from a C API to C++ wrappers. It can be found from the main page of the C++ API Reference Manual. (BMR - 2017/10/17, HDFFV-10151) High-Level APIs --------------- - H5DOread_chunk Users wanted to read compressed data directly from a file without any processing by the HDF5 data transfer pipeline, just as they were able to write it directly to a file with H5DOwrite_chunk. New API function, corresponding to existing function H5DOwrite_chunk. H5DOread_chunk reads a raw data chunk directly from a chunked dataset in the file into the application buffer, bypassing the library’s internal data transfer pipeline, including filters. (VC - 2017/05/02, HDFFV-9934) Support for New Platforms, Languages, and Compilers =================================================== - Added NAG compiler Bug Fixes since HDF5-1.8.19 =========================== Configuration ------------- - cmake The hdf5 library used shared szip and zlib, which needlessly required applications to link with the same szip and zlib libraries. Changed the target_link_libraries commands to use the static libs. Removed improper link duplication of szip and zlib. Adjusted the link dependencies and the link interface values of the target_link_libraries commands. (ADB - 2017/11/14, HDFFV-10329) - cmake MPI CMake implementation for MPI was problematic and would create incorrect MPI library references in the hdf5 libraries. Reworked the CMake MPI code to properly create CMake targets.Also merged the latest CMake FindMPI.cmake changes to the local copy. This is necessary until HDF changes the CMake minimum to 3.9 or greater. (ADB - 2017/11/02, HDFFV-10321) - Fixed Fortran linker flags when using the NAG Fortran compiler (autotools). (HDFFV-10037, MSB, 2017/10/21) - cmake Too many commands for POST_BUILD step caused command line to be too big on windows. Changed foreach of copy command to use a custom command with the use of the HDFTEST_COPY_FILE macro. (ADB - 2017/07/12, HDFFV-10254) Library ------- - filter plugin handling in H5PL.c and H5Z.c It was discovered that the dynamic loading process used by filter plugins had issues with library dependencies. CMake build process changed to use LINK INTERFACE keywords, which allowed HDF5 C library to make dependent libraries private. The filter plugin libraries no longer require dependent libraries (such as szip or zlib) to be available. (ADB - 2017/11/16, HDFFV-10328) - Fix rare object header corruption bug In certain cases, such as when converting large attributes to dense storage, an error could occur which would either fail an assertion or cause file corruption. Fixed and added test. (NAF - 2017/11/14, HDFFV-10274) - H5Zfilter_avail in H5Z.c The public function checked for plugins, while the private function did not. Modified H5Zfilter_avail and private function, H5Z_filter_avail. Moved check for plugin from public to private function. Updated H5P__set_filter due to change in H5Z_filter_avail. Updated tests. (ADB - 2017/10/10, HDFFV-10297, HDFFV-10319) - Fix H5Sencode bug when num points selected is >2^32 Modified to fail if the 32 bit limit is exceeded when encoding either offsets or counts in the selection. (HDFFV-10323, VC, 2017/09/07) - Fix H5HL_offset_into() (1) Fix H5HL_offset_into() to return error when offset exceeds heap data block size. (2) Fix other places in the library that call this routine to detect error routine. (HDFFV-10216, VC, 2017/09/05) Tools ----- - h5repack h5repack failed to copy a dataset with existing filter. Reworked code for h5repack and h5diff code in tools library. Added improved error handling, cleanup of resources and checks of calls. Modified H5Zfilter_avail and private function, H5Z_filter_avail. Moved check for plugin from public to private function. Updated H5P__set_filter due to change in H5Z_filter_avail. Updated tests. Note, h5repack output display has changed to clarify the individual steps of the repack process. The output indicates if an operation applies to all objects. Lines with notation and no information have been removed. (ADB - 2017/10/10, HDFFV-10297, HDFFV-10319) - h5repack h5repack always set the User Defined filter flag to H5Z_FLAG_MANDATORY. Added another parameter to the 'UD=' option to set the flag by default to '0' or H5Z_FLAG_MANDATORY, the other choice is '1' or H5Z_FLAG_OPTIONAL. (ADB - 2017/08/31, HDFFV-10269) - h5ls h5ls generated error on stack when it encountered a H5S_NULL dataspace. Adding checks for H5S_NULL before calling H5Sis_simple (located in the h5tools_dump_mem function) fixed the issue. (ADB - 2017/08/17, HDFFV-10188) - h5dump h5dump segfaulted on output of XML file. Function that escape'd strings used the full buffer length instead of just the length of the replacement string in a strncpy call. Using the correct length fixed the issue. (ADB - 2017/08/01, HDFFV-10256) - h5diff h5diff segfaulted on compare of a NULL variable length string. Improved h5diff compare of strings by adding a check for NULL strings and setting the lengths to zero. (ADB - 2017/07/25, HDFFV-10246) - h5import h5import crashed trying to import data from a subset of a dataset. Improved h5import by adding the SUBSET keyword. h5import understands to use the Count times the Block as the size of the dimensions. Added INPUT_B_ORDER keyword to old-style configuration files. The import from h5dump function expects the binary files to use native types (FILE '-b' option) in the binary file. (ADB - 2017/06/15, HDFFV-10219) C++ API ------- - Marked the following functions deprecated because they were moved to class H5Object: H5Location::createAttribute() H5Location::openAttribute() H5Location::attrExists() H5Location::removeAttr() H5Location::renameAttr() H5Location::getNumAttrs() (BMR - 2017/10/17) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus/mayll) Version 4.4.7 20120313 Versions 4.9.3, 5.3.0, 6.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 16.10-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.196 Build 20160721 MPICH 3.1.4 compiled with GCC 4.9.3 OpenMPI 2.0.1 compiled with GCC 4.9.3 Linux 2.6.32-573.18.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-327.10.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan/jelly Version 4.8.5 20150623 (Red Hat 4.8.5-4) Versions 4.9.3, 5.3.0, 6.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.4.196 Build 20170411 MPICH 3.1.4 compiled with GCC 4.9.3 NAG Fortran Compiler Release 6.1(Tozai) Build 6116 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Visual Studio 2015 w/ Intel C, Fortran 2017 (cmake) Visual Studio 2015 w/ MSMPI 8 (cmake) Cygwin(CYGWIN_NT-6.1 2.8.0(0.309/5/3) gcc and gfortran compilers (GCC 5.4.0) (cmake and autotools) Windows 10 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Cygwin(CYGWIN_NT-6.1 2.8.0(0.309/5/3) gcc and gfortran compilers (GCC 5.4.0) (cmake and autotools) Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Mac OS X Mavericks 10.9.5 Apple LLVM version 6.0 (clang-600.0.57) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple LLVM version 6.1 (clang-602.0.53) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Mac OS X El Capitan 10.11.6 Apple LLVM version 7.3.0 (clang-703.0.29) 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM osx1011dev/osx1011test) Intel icc/icpc/ifort version 16.0.2 Mac OS Sierra 10.12.6 Apple LLVM version 8.1 (clang-802.0.42) 64-bit gfortran GNU Fortran (GCC) 7.1.0 (kite) Intel icc/icpc/ifort version 17.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/n n y y y Windows 7 x64 Cygwin n y/n n y y y Windows 10 y y/y n y y y Windows 10 x64 y y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemite 10.10.5 64-bit n y/y n y y y Mac OS X El Capitan 10.11.6 64-bit n y/y n y y y Mac OS Sierra 10.12.6 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 7 x64 Cygwin n n n y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemite 10.10.5 64-bit y n y y Mac OS X El Capitan 10.11.6 64-bit y n y y Mac OS Sierra 10.12.6 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-431.11.2.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (mayll) Debian8.4.0 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1 x86_64 GNU/Linux gcc (Debian 4.9.2-10) 4.9.2 GNU Fortran (Debian 4.9.2-10) 4.9.2 (cmake and autotools) Fedora24 4.7.2-201.fc24.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) GNU Fortran (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) (cmake and autotools) CentOS 7.2 3.10.0-327.28.2.el7.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) (cmake and autotools) Ubuntu 16.04 4.4.0-38-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 GNU Fortran (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 (cmake and autotools) Known Problems ============== The dynamically loaded plugin test libraries require undefined references to HDF5 functions to be resolved at runtime in order to function properly. With autotools on CYGWIN this results in build errors, and we have not found a solution that satisfies both. Therefore the dynamically loaded plugin tests have been disabled on CYGWIN. Mac OS X 10.13 added additional subdirectory structure in .libs for shared libraries. Consequently "make check" will fail testing java and dynamically loaded plugin test libraries attempting to copy files from the previous locations in .libs directories. This will be addressed in the next release when support for the Mac OS X 10.13 platform is added. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. %%%%1.8.19%%%% HDF5 version 1.8.19 released on 2017-06-15 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.18 and HDF5-1.8.19, and contains information on the platforms tested and known problems in HDF5-1.8.19. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.19 source code, documentation, and additional materials can be found on the HDF5 web page at: https://support.hdfgroup.org/HDF5/ The HDF5 1.8.19 release can be obtained from: https://support.hdfgroup.org/HDF5/release/obtain518.html User documentation for 1.8.19 can be accessed directly at this location: https://support.hdfgroup.org/HDF5/doc1.8/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: https://support.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.19 (current release) versus Release 1.8.18 https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.19 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration -------------- - CMake in the Tools User-defined filters on Windows require that tools be built with shared libraries. CMake command code added to build tools with shared libraries as well as with static libraries. (ADB - 2017/02/07, HDFFV-10123) Library ------- - H5PL package Users would like to be able to set the plugin path programmatically instead of through the environment variable. H5PL package obtained new APIs for manipulating the entries of the plugin path table. The new APIs are; H5PLappend - Insert a plugin path at the end of the list. H5PLprepend - Insert a plugin path at the beginning of the list. H5PLreplace - Replace the path at the specified index. H5PLinsert - Insert a plugin path at the specified index, moving other paths after the index. H5PLremove - Remove the plugin path at the specifed index and compacting the list. H5PLget - Query the plugin path at the specified index. H5PLsize - Query the size of the current list of plugin paths. (ADB - 2017/04/04, HDFFV-10143) - H5Dget_chunk_storage_size The storage size of a chunk in the file is needed to determine the size of the buffer to be allocated for reading a chunk directly from a file. New API function gets the size in bytes currently allocated within a file for a raw data chunk in a dataset. This function was added to get the chunk size in support of the implementation of H5DOread_chunks, but may also be useful for other purposes. (VC - 2017/05/02, HDFFV-9934) C++ API ------- - The following C++ API wrappers have been added to the C++ Library: // Determines if a name exists. H5Location::nameExists() - C API H5Lexists() // Checks if an ID is valid. IdComponent::isValid() - C API H5Iis_valid() // Sets the number of soft or user-defined links that can be // traversed before a failure occurs. LinkAccPropList::setNumLinks() - C API H5Pset_nlinks() // Gets the number of soft or user-defined link traversals allowed LinkAccPropList::getNumLinks() - C API H5Pget_nlinks() // Returns a copy of the creation property list of a datatype. DataType::getCreatePlist() - C API H5Tget_create_plist() // Opens an object within a location, regarless its type. H5Location::openObjId() - C API H5Oopen() H5Location::openObjId() - C API H5Oopen() // Closes an object opened by openObjId(). H5Location::closeObjId() - C API H5Oclose() // Gets general information about a file. H5File::getFileInfo() - C API H5Fget_info() // Returns the header version of an HDF5 object. H5Object::objVersion() - C API H5Oget_info() (BMR, 2017/05/13, HDFFV-10004, HDFFV-10156) - New class LinkAccPropList is added for link access proprety list (BMR, 2017/05/13, HDFFV-10156) High-Level APIs --------------- - H5DOread_chunk Users wanted to read compressed data directly from a file without any processing by the HDF5 data transfer pipeline, just as they were able to write it directly to a file with H5DOwrite_chunk. New API function, corresponding to existing function H5DOwrite_chunk. H5DOread_chunk reads a raw data chunk directly from a chunked dataset in the file into the application buffer, bypassing the library’s internal data transfer pipeline, including filters. (VC - 2017/05/02, HDFFV-9934) Support for New Platforms, Languages, and Compilers =================================================== - Added OpenMPI 2.0.1 compiled with GCC 4.9.3 Bug Fixes since HDF5-1.8.18 =========================== Configuration ------------- - Support for Fortran shared libraries on OS X with autotools now works. Cmake builds still disables Fortran shared libraries on OS X. (MSB - 2017/04/30, HDFFV-2772) Library ------- - bitfield datatypes bitfield datatypes did not fully support endianness of the data. Improved the endianness of bitfield datatypes by adding missing functional code. This code used integer types as a template. (ADB - 2017/05/12, HDFFV-10186) - Newly created datasets with H5D_COMPACT layout failed to open after several H5Dopen/H5Dclose cycles. The layout "dirty" flag for a compact dataset is now properly reset before flushing the message. (VC - 2017/05/11, HDFFV-10051) - Missing #ifdef __cplusplus macros were added to the generated H5Epubgen.h file. (DER - 2017/04/25, HDFFV-9638) Tools ----- - h5repack h5repack did not maintain the creation order flag of the root group. Improved h5repack by reading the creation order and applying the flag to the new root group. Also added arguments to set the order and index direction, which applies to the traversing of the original file, on the command line. (ADB - 2017/05/26, HDFFV-8611) - h5diff h5diff failed to account for strpad type and null terminators of char strings. Also, h5diff failed to account for string length differences and would give a different result depending on file order in the command line. Improved h5diff compare of strings and arrays by adding a check for string lengths and if the strpad was null filled. (ADB - 2017/05/18, HDFFV-9055, HDFFV-10128) - h5diff h5diff help text about epsilon comparison was confusing. Changed h5diff help text to indicate that the 'a' refers to the datapoint in file1 and 'b' refers to the datapoint value in file2. (ADB - 2017/05/16, HDFFV-9995) - h5diff h5diff did not report user-defined filter data differences correctly. Improved h5diff compare of user-defined filter data by reporting an error if the user-defined filter plugin cannot be found. (ADB - 2017/01/18, HDFFV-9994) C++ API ------- - The class hierarchy is revised to better reflect the HDF5 model. Class H5File is now derived from class Group instead of H5Location. Class Attribute is now derived from H5Location instead of IdComponent. Wrappers of H5A APIs in H5Location are now duplicated in H5Object, the original wrappers in H5Location will be deprecated in future releases. (BMR - 2017/05/15, HDFFV-10156) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus/mayll) Version 4.4.7 20120313 Versions 4.9.3, 5.2.0, 6.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 16.10-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.098 Build 20160721 MPICH 3.1.4 compiled with GCC 4.9.3 OpenMPI 2.0.1 compiled with GCC 4.9.3 Linux 2.6.32-573.18.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-327.10.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan) Version 4.8.5 20150623 (Red Hat 4.8.5-4) Versions 4.9.3, 5.3.0, 6.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.4.196 Build 20170411 MPICH 3.1.4 compiled with GCC 4.9.3 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Visual Studio 2015 w/ Intel C, Fortran 2017 (cmake) Visual Studio 2015 w/ MSMPI 8 (cmake) Cygwin(CYGWIN_NT-6.1 2.8.0(0.309/5/3) gcc and gfortran compilers (GCC 5.4.0) (cmake and autotools) Windows 10 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Cygwin(CYGWIN_NT-6.1 2.8.0(0.309/5/3) gcc and gfortran compilers (GCC 5.4.0) (cmake and autotools) Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Mac OS X Mt. Lion 10.8.5 Apple LLVM version 5.1 (clang-503.0.40) 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 15.0.3 Mac OS X Mavericks 10.9.5 Apple LLVM version 6.0 (clang-600.0.57) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple LLVM version 6.1 (clang-602.0.53) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Mac OS X El Capitan 10.11.4 Apple LLVM version 7.3.0 (clang-703.0.29) 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM osx1011dev/osx1011test) Intel icc/icpc/ifort version 16.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/n n y y y Windows 7 x64 Cygwin n y/n n y y y Windows 10 y y/y n y y y Windows 10 x64 y y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemite 10.10.5 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 7 x64 Cygwin n n n y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemite 10.10.5 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-431.11.2.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (mayll) Debian8.4.0 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1 x86_64 GNU/Linux gcc (Debian 4.9.2-10) 4.9.2 GNU Fortran (Debian 4.9.2-10) 4.9.2 (cmake and autotools) Fedora24 4.7.2-201.fc24.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) GNU Fortran (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) (cmake and autotools) CentOS 7.2 3.10.0-327.28.2.el7.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) (cmake and autotools) Ubuntu 16.04 4.4.0-38-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 GNU Fortran (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 (cmake and autotools) Known Problems ============== The dynamically loaded plugin test libraries require undefined references to HDF5 functions to be resolved at runtime in order to function properly. With autotools on CYGWIN this results in build errors, and we have not found a solution that satisfies both. Therefore the dynamically loaded plugin tests have been disabled on CYGWIN. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. %%%%1.8.18%%%% HDF5 version 1.8.18 released on 2016-11-14 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.17 and HDF5-1.8.18, and contains information on the platforms tested and known problems in HDF5-1.8.18. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.18 source code, documentation, and additional materials can be found on the HDF5 web page at: https://support.hdfgroup.org/HDF5/ The HDF5 1.8.18 release can be obtained from: https://support.hdfgroup.org/HDF5/release/obtain518.html User documentation for 1.8.18 can be accessed directly at this location: https://support.hdfgroup.org/HDF5/doc1.8/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: https://support.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.18 (current release) versus Release 1.8.17 https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.17 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - CMake: Added NAMESPACE hdf5:: to package configuration files to allow projects using installed HDF5 binaries built with CMake to link with them without specifying the HDF5 library location via IMPORTED_LOCATION. (ADB, 2016/10/17, HDFFV-10003) - CMake: Changed the CTEST_BUILD_CONFIGURATION option to CTEST_CONFIGURATION_TYPE as recommended by the CMake documentation. (ADB, 2016/10/17, HDFFV-9971) - CMake: Added support for GIT (ADB, 2016/07/12) Library ------- - None Parallel Library ---------------- - None Tools ----- - None High-Level APIs --------------- - None Fortran API ----------- - None C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== Bug Fixes since HDF5-1.8.17 =========================== Configuration ------------- - Fixed a problem preventing HDF5 to be built on 32-bit CYGWIN by condensing cygwin configuration files into a single file and removing outdated compiler settings. (ABD, 2016/07/12, HDFFV-9946) - CMake: Fixed a command length overflow error by converting custom commands inside CMakeTest.cmake files into regular dependencies and targets. (ABD, 2016/07/12, HDFFV-9939) - CMake: Fixed a timeout error that would occasionally occur when running the virtual file driver tests simultaneously due to test directory and file name collisions. (ABD, 2016/09/19, HDFFV-9431) Library ------- - Fixed a memory leak that would occur when the library allocated memory for an external file prefix (H5Pset_efile_prefix) and failed to free it. (DER, 2016/04/29) - Fixed an error that would occur when calling H5Adelete on an attribute which is attached to an externally linked object in the target file and whose datatype is a committed datatype in the main file. (VC, 2016-07-04, HDFFV-9940) - Fixed a problem where a plugin compiled into a DLL in the default plugin directory could not be found by the HDF5 library at runtime on Windows when the HDF5_PLUGIN_PATH environment variable was not set. (ABD, 2016/08/01, HDFFV-9706) - Fixed an issue where H5Pset_alignment could result in misaligned blocks with some input combinations, causing an assertion failure in debug mode. (NAF, 2016/08/11, HDFFV-9948) - A number of issues were fixed when reading/writing from/to corrupted files to ensure that the library fails gracefully in these cases: * Writing to a corrupted file that has an object message which is incorrectly marked as sharable on disk results in a buffer overflow / invalid write instead of a clean error message. * Decoding data from a corrupted file with a dataset encoded with the H5Z_NBIT decoding can result in a code execution vulnerability under the context of the application using the HDF5 library. * When decoding an array datatype from a corrupted file, the HDF5 library fails to return an error in production if the number of dimensions decoded is greater than the maximum rank. * When decoding an "old style" array datatype from a corrupted file, the HDF5 library fails to return an error in production if the number of dimensions decoded is greater than the maximum rank. (NAF, 2016/10/06, HDFFV-9950, HDFFV-9951, HDFFV-9992, HDFFV-9993) - Fixed an error that would occur when copying an object with an attribute which is a compound datatype consisting of a variable length string. (VC, 2016-10-17, HDFFV-7991) Parallel Library ---------------- - Fixed a bug that could occur when allocating a chunked dataset in parallel with an alignment set and an alignment threshold greater than the chunk size but less than or equal to the raw data aggregator size. (NAF, 2016/08/11, HDFFV-9969) Performance ------------- - None Tools ----- - Fixed an error in the compiler wrapper scripts (h5cc, h5fc, et al.) in which they would erroneously drop the file argument specified via the -o flag when the -o flag was specified before the -c flag on the command line, resulting in a failure to compile. (LRK, 2016/06/08, HDFFV-9938, HDFFV-9530) - h5repack User Defined (UD) filter parameters were not parsed correctly. The UD filter parameters were not being parsed correctly. Reworked coding section to parse the correct values and verify number of parameters. (ADB, 2016/10/19, HDFFV-9996, HDFFV-9974, HDFFV-9515, HDFFV-9039) Fortran API ----------- - Fortran library fails to compile and fails tests with NAG compiler. * Removed the non-standard assumption that KIND=SIZEOF, in the HDF5 configure programs. * Removed Fortran 66 character/integer conversions from tests. * Removed the use of C_SIZEOF in the test programs * Changed to using STORAGE_SIZE in the test programs if available. Otherwise, uses C_SIZEOF or SIZEOF. (MSB, 2016/9/22, HDFFV-9973) - Fortran segfaults for F03 tests with NAG compiler * Removed INTENT(OUT) from 'fillvalue' in F2003 interface for H5Pget_fill_value_f. (MSB, 2016/9/22, HDFFV-9980) C++ API ------- - The macro H5_NO_NAMESPACE is deprecated from the HDF5 C++ API library. In future releases, the macros H5_NO_STD and OLD_HEADER_FILENAME may also be removed. (BMR, 2016/10/27, HDFFV-9532) High-Level APIs: --------------- - The high-level API Packet Table (PT) did not write data correctly when the datatype is a compound type that has string type as one of the members. This problem started in 1.8.15, after the fix of HDFFV-9042 was applied, which caused the Packet Table to use native type to access the data. It should be up to the application to specify whether the buffer to be read into memory in the machine’s native architecture. Thus, the PT is fixed to not use native type but to make a copy of the user's provided datatype during creation or the packet table's datatype during opening. If an application wishes to use native type to read the data, then the application will request that. However, the Packet Table doesn't provide a way to specify memory datatype in this release. This feature will be available in future releases, HDFFV-10023. (BMR, 2016/10/27, HDFFV-9758) Fortran High-Level APIs: ------------------------ - None Testing ------- - None Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus/mayll) Version 4.4.7 20120313 Versions 4.8.4, 4.9.3, 5.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 15.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 Linux 2.6.32-573.18.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-327.10.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan) Version 4.8.5 20150623 (Red Hat 4.8.5-4) Versions 4.9.3, 5.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Cygwin(CYGWIN_NT-6.1 2.2.1(0.289/5/3) gcc(4.9.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 10 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 16 (cmake) Mac OS X Mt. Lion 10.8.5 Apple LLVM version 5.1 (clang-503.0.40) 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 15.0.3 Mac OS X Mavericks 10.9.5 Apple LLVM version 6.0 (clang-600.0.57) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple LLVM version 6.1 (clang-602.0.53) 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Mac OS X El Capitan 10.11.4 Apple LLVM version 7.3.0 (clang-703.0.29) 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM osx1011dev/osx1011test) Intel icc/icpc/ifort version 16.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y n Windows 10 n y/y n y y y Windows 10 x64 n y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemite 10.10.5 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemite 10.10.5 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-431.11.2.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (platypus) Debian8.4.0 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1 x86_64 GNU/Linux gcc (Debian 4.9.2-10) 4.9.2 GNU Fortran (Debian 4.9.2-10) 4.9.2 (cmake and autotools) Fedora24 4.7.2-201.fc24.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) GNU Fortran (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3) (cmake and autotools) CentOS 7.2 3.10.0-327.28.2.el7.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) (cmake and autotools) Ubuntu 16.04 4.4.0-38-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 GNU Fortran (Ubuntu 5.4.0-6ubuntu1~16.04.2) 5.4.0 (cmake and autotools) Known Problems ============== * On windows platforms in debug configurations, the VFD flush1 tests will fail with the split and multi VFD drivers. These tests will display a modal debug dialog which must be answered or wait for the test timeout to expire. (ADB - 2014/06/23 - HDFFV-8851) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (Issue 8147). Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior shouldn't to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.17%%%% HDF5 version 1.8.17 released on 2016-05-10 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.16 and HDF5-1.8.17-*, and contains information on the platforms tested and known problems in HDF5-1.8.17-*. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.17 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.17 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.17 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.17 (current release) versus Release 1.8.16 http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.16 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - Cmakehdf5: Added Ability to Run Multiple Make Commands Added option --njobs to specify up to how many jobs to launch during build (cmake) and testing (ctest). (AKC - 2015/12/13, HDFFV-9612) - Cmakehdf5: Added Szip Support and Verbose Option Added --with-szlib to support the Szip library; and --enable/disable-verbose to display all CMake process output. (AKC - 2015/11/16, HDFFV-8932 and DAILYTEST-195) - CMake minimum is now 3.1.0. (ADB - 2015/11/14) - Large File System (LFS) Support has Changed in the Autotools We assume that fseeko and ftello exist. The *64 I/O functions and types are no longer explicitly used. We now rely on a mapping provided by _FILE_OFFSET_BITS (or its equivalent). _LARGEFILE(64)_SOURCE is no longer exposed via AM_CPPFLAGS. (DER - 2016/03/29, HDFFV-9626 and HDFFV-9541) Library ------- - New API Calls for Searching for External Dataset Storage API calls that determine the search path for dataset external storage were added. H5Pset/get_efile_prefix() API calls were added to the library. These functions give control over the search path for dataset external storage that has been configured with H5Pset_external(). Additionally, the HDF5_EXTFILE_PREFIX environment variable can be used to control the search path. (DER - 2016/04/20, HDFFV-8740) Parallel Library ---------------- - None Tools ----- - None High-Level APIs --------------- C Packet Table API ------------------ - Replacement of a Public Function with H5PTcreate The existing function H5PTcreate_fl limits applications so they can use the deflate compression only. The public function H5PTcreate has been added to replace H5PTcreate_fl. H5PTcreate takes a property list identifier to provide flexibility on creation properties. This also removes the following warning: "deprecated conversion from string constant to "char*" [-Wwrite-strings]". (BMR - 2016/04/25, HDFFV-9708, HDFFV-8615) - New Public Functions: H5PTget_dataset and H5PTget_type Two accessor functions have been added. H5PTget_dataset returns the identifier of the dataset associated with the packet table, and H5PTget_type returns the identifier of the datatype used by the packet table. (BMR - 2016/04/25, HDFFV-8623 patch 3) - Regarding #ifdef VLPT_REMOVED The #ifdef VLPT_REMOVED blocks have been removed from the packet table (PT) library source except for the following functions: + H5PTis_varlen() has been made available again + H5PTfree_vlen_readbuff() is now H5PTfree_vlen_buff() (BMR - 2016/04/25, HDFFV-442) C++ Packet Table API -------------------- - New Constructor in FL_PacketTable An overloaded constructor has been added to FL_PacketTable and takes a property list identifier to provide flexibility on creation properties such as compression. FL_PacketTable(hid_t fileID, const char* name, hid_t dtypeID, hsize_t chunkSize = 0, hid_t plistID = H5P_DEFAULT) (BMR - 2016/04/25, HDFFV-8623 patch 5) - New Member Functions in PacketTable Two accessor wrappers were added to class PacketTable. PacketTable::GetDataset() returns the identifier of the dataset associated with the packet table, and PacketTable::GetDatatype() returns the identifier of the datatype that the packet table uses. (BMR - 2016/04/25, HDFFV-8623 patch 4) - New Member Functions with "char*" as an Argument Overloaded functions were added to provide the "const char*" argument; the existing version will be deprecated in future releases. This also removes the following warning: "deprecated conversion from string constant to "char*" [-Wwrite-strings]". (BMR - 2016/04/25, HDFFV-8623 patch 1, HDFFV-8615) - Regarding #ifdef VLPT_REMOVED The #ifdef VLPT_REMOVED blocks have been removed from the packet table library source code except for the following functions: + VL_PacketTable::IsVariableLength() was moved to PacketTable + VL_PacketTable::FreeReadBuff() is now PacketTable::FreeBuff() (BMR - 2016/04/25, HDFFV-442) Fortran API ----------- - None C++ API ------- - New Member Function in DSetCreatPropList DSetCreatPropList::setNbit() was added to setup N-bit compression for a dataset. (BMR - 2016/04/25, HDFFV-8623 patch 7) - New Overloaded "const" Member Functions in ArrayType The two following functions were added: ArrayType::getArrayNDims() const ArrayType::getArrayDims() const to provide const version, and the non-const version was marked deprecated. In-memory array information, ArrayType::rank and ArrayType::dimensions, were removed. This is an implementation detail and should not affect applications. (BMR, 2016/04/25, HDFFV-9725) - New member function added The assignment operator ArrayType::operator= is added because ArrayType has pointer data members. (BMR, 2016/03/07, HDFFV-9562) Support for New Platforms, Languages, and Compilers =================================================== - Mac OS X El Capitan 10.11.4 with compilers Apple clang/clang++ version 7.3.0 from Xcode 7.3, gfortran GNU Fortran (GCC) 5.2.0 and Intel icc/icpc/ifort version 16.0.2 Bug Fixes since HDF5-1.8.16 =========================== Configuration ------------- - Updated Linux Language Level Flags to Match the Autotools. Removed Linux-specific Flags from OS X. An addition to the flags simply being out of sync with the Autotools, the Linux flags were used on OS X builds which led to symbols not being found. Although this was non-fatal and compilation continued (implicit definitions were used by the compiler and the symbols resolved at link time), a large number of warnings were raised. Linux changes: * CHANGED: _POSIX_C_SOURCE (from 199605 to 200112L) * ADDED: _GNU_SOURCE * REMOVED: _BSD_SOURCE * REMOVED: _DEFAULT_SOURCE (DER - 2015/12/08, HDFFV-9627) - The --enable-clear-file-buffers configure Option was Non-functional so the Feature was Always Enabled (its default value). Regardless of the configure flag, the setting was always enabled when the Autotools were used to configure HDF5. This was due to the "no" option being processed after the "*" option in configure.ac so "*" matched first. CMake was unaffected. The option now works correctly. NOTE that builders are always advised to leave this option enabled. When disabled, buffers that are written to disk may contain the memory's previous contents, which may include secure information. The performance overhead of the feature (a single memset call per allocation) is minimal. (DER - 2016/02/03, HDFFV-9676) - Added a patch to remove '"'s from arguments for MPI compilers that were causing errors compiling H5lib_settings.c with SGI MPT. (LRK - 2016/04/20, HDFFV-9439) Library ------- - Fixed shared file pointer problem which caused a crash when running a program provided by a user. (VC - 2016/04/01, HDFFV-9469) - Fixed some format string warnings that prevent compiling with -Werror=format-security on gcc. These only appeared in error messages and would not cause problems under normal operation. (DER - 2016/01/13, HDFFV-9640) - Fixed a library segmentation fault when accessing a corrupted file provided by a user. (MSC - 2016/02/19, HDFFV-9670) Parallel Library ---------------- - None Performance ------------- - None Tools ----- - h5dump: Sub-setting Fixed for Dimensions Greater than Two When a dataset has more than two dimensions, sub-setting would incorrectly calculate the data that needed to be displayed. Added in block and stride calculations that account for dimensions greater than two. NOTE: lines that have line breaks inserted because of display length calculations may have index info that is incorrect until the next dimension break. (ADB - 2016/03/07, HDFFV-9698) - h5dump: Issue with Argument Segmentation Fault When an argument with an optional value was at the end of the command line with a value, h5dump would crash. Reworked check for remaining arguments. (ADB - 2016/03/07, HDFFV-9570, HDFFV-9684) - h5dump: Issue with Default Fill Value Added all default cases of fill value to the display of fill value. (ADB -, 2016/03/07, HDFFV-9241) - h5dump: Clarified Help Clarified usage of -O F option in h5dump utility help. (ADB - 2016/03/07, HDFFV-9066) - h5dump: Issue with Double Free Fault Added a check for filename not null before calling free(). (ADB - 2016/01/27, HDFFV-9639) - VS2015 Release Changed how Timezone was Handled Created a function, HDget_timezone, in H5system.c. Replaced timezone variable usage with function call. (ADB - 2015/11/02, HDFFV-9550) Fortran API ----------- - None C++ API ------- - Removal of Obsolete Methods The overloaded methods which had parameters that should be const but were not have been removed. (BMR - 2016/01/13, HDFFV-9789) High-Level APIs: --------------- - Fixed Memory Leak in Packet Table API Applied user's patch to fix memory leak in the creation of a packet table. (BMR - 2016/04/25, HDFFV-9700) Fortran High-Level APIs: ------------------------ - None Testing ------- - None Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 6.1 xlc/xlc_r 10.1.0.5 (NASA G-ADA) xlC/xlC_r 10.1.0.5 xlf90/xlf90_r 12.1.0.6 Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.9.3, Version 5.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 15.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 Linux 2.6.32-504.8.1.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-229.14.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan) Version 4.8.5 20150623 (Red Hat 4.8.5-4) Version 5.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 (cmake) Cygwin(CYGWIN_NT-6.1 2.2.1(0.289/5/3) gcc(4.9.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Mac OS X Mt. Lion 10.8.5 Apple clang/clang++ version 5.1 from Xcode 5.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 15.0.3 Mac OS X Mavericks 10.9.5 Apple clang/clang++ version 6.0 from Xcode 6.2 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple clang/clang++ version 6.1 from Xcode 7.0 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Mac OS X El Capitan 10.11.4 Apple clang/clang++ version 7.3.0 from Xcode 7.3 64-bit gfortran GNU Fortran (GCC) 5.2.0 (osx1011dev/ox1011test) Intel icc/icpc/ifort version 16.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y n Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemeti 10.10.5 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemeti 10.10.5 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-431.11.2.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-431.11.2.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (platypus) Windows 7 Visual Studio 2008 (cmake) Windows 7 x64 Visual Studio 2008 (cmake) Windows 10 Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 10 x64 Visual Studio 2013 w/ Intel Fortran 15 (cmake) Debian7.5.0 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora20 3.15.3-200.fc20.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) GNU Fortran (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) (cmake and autotools) SUSE 13.1 3.11.10-17-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.8.1 GNU Fortran (SUSE Linux) 4.8.1 (cmake and autotools) Ubuntu 14.04 3.13.0-35-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 (cmake and autotools) hopper.nersc.gov PrgEnv-gnu/5.2.40 gcc (GCC) 4.9.2 20141030 (Cray Inc.) GNU Fortran (GCC) 4.9.2 20141030 (Cray Inc.) g++ (GCC) 4.9.2 20141030 (Cray Inc.) Known Problems ============== * On windows platforms in debug configurations, the VFD flush1 tests will fail with the split and multi VFD drivers. These tests will display a modal debug dialog which must be answered or wait for the test timeout to expire. (ADB - 2014/06/23 - HDFFV-8851) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (Issue 8147). Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior shouldn't to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.16%%%% HDF5 version 1.8.16 released on 2015-11-10 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.15 and HDF5-1.8.16, and contains information on the platforms tested and known problems in HDF5-1.8.16. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.16 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.16 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.16 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.16 (current release) versus Release 1.8.15": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.15 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration and Build ------------- - The thread-safety + high-level library combination has been marked as "unsupported" in the Autotools The global lock used by the thread-safety feature has never been raised to the high-level library level, making it possible that the library state could change if a context switch were to occur in a high-level library call. Because of this, the combination of thread-safety and high-level library is officially unsupported by The HDF Group. In the past, although this combination has never been supported, this was not enforced by the build systems. These changes will cause an Autotools configure step to fail if --enable-threadsafe and --enable-hl are combined unless additional options are specified. Since the high-level library is built by default, this means that these extra configuration options will need to be used any time --enable-threadsafe is selected. To build with --enable-threadsafe, either: 1) Use --disable-hl to disable the high-level library (recommended) 2) Use --enable-unsupported to build the high-level library with the thread-safety feature. (DER - 2015/09/10 HDFFV-8719) - Using CMake now builds both static and shared libraries. The CMake files have been updated to build both static and shared libraries, with tools only built statically. The packaging of the libraries and tools will include cmake-config files that allows projects to choose either shared or static (default) libraries to be found with the find_package command using the COMPONENTS keyword and a list of components. The imported libraries will include any interface specific settings and dependent libraries. The default setting for BUILD_SHARED_LIBS has changed from OFF to ON, which builds both static and shared libraries. The static libraries are always built because of tools requirements. (ADB - 2015/08/24 HDFFV-5881) - Inline functions now correctly annotated with Autotools builds. The method used to detect the appropriate inline markup scheme was nonfunctional in Autotools builds. The Autotools have been modified to correctly detect the compiler's inline markup symbol and apply it to the source. Note that only a very small number of internal functions are marked inline so this was not a very big change or likely to significantly affect performance. As a part of this change, the H5_inline symbol no longer appears in H5pubconf.h. (DER - 2015/08/13 HDFFV-9119, HDFFV-9421) - Removed obsolete/unmaintained files from config/ Several files were removed from the config directory. These files represent old operating systems, were no longer necessary, and/or were no longer maintained. configure.ac was updated to reflect the removed files. Removed: craynv dec-flags hpux11.23 ia64-linux-gnu nec-superux14.1 sv1-cray x86_64-redstorm-linux-gnu powerpc-ibm-aix5.x As a part of this work, a few lines that deal with locating the sys/fpu.h header on SGI machines and some OSF/1 configure lines were also removed. The Solaris config was also renamed to not have a version number since the version number was ignored by configure as it applies to all Solaris versions. (DER - 2015/09/04 HDFFV-9116) - Removed the FP_TO_INTEGER_OVERFLOW_WORKS macro/defines from the library This was for working around bugs in the Cray X1 compiler, which is no longer supported. (DER - 2015/09/09 HDFFV-9191) - Removed the H5_SW_ULONG_TO_FP_BOTTOM_BIT_WORKS and H5_FP_TO_ULLONG_BOTTOM_BIT_WORKS symbols and associated code. H5_SW_ULONG_TO_FP_BOTTOM_BIT_WORKS was a work-around on old 64-bit SGI and Solaris systems. H5_FP_TO_ULLONG_BOTTOM_BIT_WORKS was a work-around for old PGI compilers on Linux. Neither of these were used in any current library code and only appeared in the dt_arith test. (DER - 2015/09/09 HDFFV-9187) - Removed CONVERT_DENORMAL_FLOAT symbol and associated code from the library. This was only set in configure files for Cray and NEC computers. These config files no longer exist so there is no effect on currently supported platforms. (DER - 2015/09/09 HDFFV-9188) - Removed _BSD_SOURCE and _DEFAULT_SOURCE from configure.ac These are old BSD-compatibility symbols that are no longer needed by the library. (DER - 2015/09/10 HDFFV-9079) - Removed HW_FP_TO_LLONG_NOT_WORKS symbol and associated code from the library. This was part of a work-around for the VS.NET 2003 compiler, which is no longer supported. (DER - 2015/09/10 HDFFV-9189) - Removed the BAD_LOG2_CODE_GENERATED symbol and associated code from the library. This was an IRIX work-around. (DER - 2015/09/11 HDFFV-9195) - Decoupled shared object version numbers for wrapper libraries from the shared object version number for the HDF5 library. These will be maintained on an individual basis according to the interface changes specific to these wrapper libraries. For HDF5 1.8.16 the shared object version numbers were changed from 10.0.1 to 10.1.0 for the HDF5 library due to added APIs. For the C++ wrapper library they were changed from 10.0.1 to 11.0.0 due to changes in existing APIs. For all other wrapper libraries the versions were changed from 10.0.1 to 10.0.2 because while the APIs had no changes there have been changes in code that did not result in changes to their interfaces. (LRK - 2015/10/28) Library ------- - H5F_ACC_DEBUG flag for H5Fopen/create: functionality removed The symbol was used to emit some extra debugging information for HDF Group developers in the multi VFD. The underlying functionality has been removed due to disuse. The symbol remains defined since it was visible in H5Fpublic.h but it has been set to zero and has no effect anywhere in the library. (DER - 2015-05-02, HDFFV-1074) - New public API call: H5is_library_threadsafe() This API call indicates if the library was built with thread- safety enabled. (DER - 2015-09-01, HDFFV-9496) Parallel Library ---------------- - None Tools ----- - None High-Level APIs --------------- - None Fortran API ----------- - None C++ API ------- - Class H5::ObjCreatPropList is added for the object creation property list class. Class H5::ObjCreatPropList is derived from H5::PropList and is a baseclass of H5::DSetCreatPropList. Additional property list classes will be derived from H5::ObjCreatPropList when they are added to the library in future releases. (BMR, 2015/10/13, Part of HDFFV-9169) - New Wrappers for C Functions H5P[s/g]et_attr_phase_change and H5P[s/g]et_attr_creation_order. Wrappers were added to class H5::ObjCreatPropList for the C Functions H5Pset_attr_phase_change: H5::ObjCreatPropList::setAttrPhaseChange H5Pget_attr_phase_change: H5::ObjCreatPropList::getAttrPhaseChange H5Pset_attr_creation_order: H5::ObjCreatPropList::setAttrCrtOrder H5Pget_attr_creation_order: H5::ObjCreatPropList::getAttrCrtOrder (BMR, 2015/10/13, Part of HDFFV-9167 and HDFFV-9169) Support for New Platforms, Languages, and Compilers =================================================== - Added VS2015 with Intel Fortran 16 to supported Windows 7 platforms Bug Fixes since HDF5-1.8.15 =========================== Configuration ------------- - CMake test for long long printf format improved The CMake configuration test for determining the printf format string for printing a long long integer was fixed. The test would crash when executed with VS2015. (ADB - 2015-10-21 HDFFV-9488) Library ------- - VS2015 removed global variable timezone The usage of the global variable timezone was modified for VS2015 by adding an alias to Windows builds. (ADB - 2015-10-23 HDFFV-9550) - Fix potential error in H5Iclear_type If the ID type's close callback could close another ID of the same type, H5Iclear_type could occasionally run into problems due to the inner workings of the skip list package. This could potentially cause an error on library shutdown without calling H5Iclear_type directly. This issue has been fixed. (NAF - 2015-08-12) - Fix uninitialized memory in dataspace selection code When creating a dataspace with H5Screate and setting the extent with H5Sextent_copy, the selection offset was not initialized, potentially causing invalid I/O. There may be other cases where this happened. Modified the library to always initialize the offset. (NAF - 2015-09-08) - Truncate file in H5Fflush() if EOA != EOF to avoid file corruption in certain scenarios In the following scenario, the resulting HDF5 file would be incorrectly corrupted because the truncate operation was at some point wrongly moved out of the flush operation: - Create a new file with a single dataset. - Write parts of the dataset (make sure that some values at the end of the dataset are not initialized). - Flush the file. - Crash the program. - Try to open the file with h5dump or h5debug, but the resulting file is corrupted. (MSC - 2015-06-15 HDFFV-9418) Parallel Library ---------------- - (XYZ - YYYY/MM/DD HDFFV-####) Performance ------------- - None Tools ----- - VS2015 changed the default format for printing of exponents VS2015 default format for exponents changed with the elimination of the leading '0'. CMake now tests for the VS2015 compiler and adjusts which reference files are used by tests. (ADB - 2015-10-23 HDFFV-9550) - Fixed h5repack with user-defined filters h5repack would throw a buffer overrun exception on Windows when parsing a user-defined filter ID of 5 digits. A local variable in the parse routine was not of sufficient size. (ADB - 2015/09/01 HDFFV-9515) Fortran API ------------ - None C++ API ------ - Removed memory leaks The static global constant objects were changed to constant references referencing dynamically allocated objects. This ensures that the clean-up process in the C++ library occurs before the termination of the C library and prevents memory leaks because the previous global constants were not properly deleted before the C library termination. (BMR, 2015/10/13, HDFFV-9529) - Fixed the problem about identifiers being closed prematurely. The C++ library needs to increment the ID's reference counter when it is duplicated in the form of C++ objects, but not when the ID is obtained from a C function. With this approach, both problems, prematurely closing ID's and memory leaks due to ID's not being closed, should be eliminated. (BMR, 2015/10/15, HDFFV-7947) High-Level APIs: ------ - None Fortran High-Level APIs: ------------------------ - None Testing ------- - None Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 6.1 xlc/xlc_r 10.1.0.5 (NASA G-ADA) xlC/xlC_r 10.1.0.5 xlf90/xlf90_r 12.1.0.6 Linux 2.6.32-573.3.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.8.4, Version 5.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 15.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 Linux 2.6.32-504.8.1.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-11) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-11) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-11) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 Linux 3.10.0-229.14.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (kituo/moohan) Version 4.8.3 20140911 (Red Hat 4.8.3-9) Version 5.2.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.3.187 Build 20150407 MPICH 3.1.4 compiled with GCC 4.9.3 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Cygwin(CYGWIN_NT-6.1 2.2.1(0.289/5/3) gcc(4.9.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Visual Studio 2015 w/ Intel Fortran 16 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Mac OS X Mt. Lion 10.8.5 Apple clang/clang++ version 5.1 from Xcode 5.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 15.0.3 Mac OS X Mavericks 10.9.5 Apple clang/clang++ version 6.0 from Xcode 6.2.0 64-bit gfortran GNU Fortran (GCC) 4.9.2 (wren/quail) Intel icc/icpc/ifort version 15.0.3 Mac OS X Yosemite 10.10.5 Apple clang/clang++ version 6.0 from Xcode 7.0.0 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.3 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y n Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemeti 10.10.5 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemeti 10.10.5 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 6.7 Linux 2.6.32 x86_64 GNU y y y y CentOS 6.7 Linux 2.6.32 x86_64 Intel y y y y CentOS 6.7 Linux 2.6.32 x86_64 PGI y y y y CentOS 7.1 Linux 3.10.0 x86_64 GNU y y y y CentOS 7.1 Linux 3.10.0 x86_64 Intel y y y y Linux 2.6.32-431.11.2.el6.ppc64 y y y y Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-431.11.2.el6 g95 (GCC 4.0.3 (g95 0.94!) #1 SMP x86_64 GNU/Linux (platypus) Mac OS X El Capitan 10.11 Apple clang/clang++ version 7.0.0 from Xcode 7.0.1 64-bit gfortran GNU Fortran (GCC) 5.2.0 (VM) Windows 7 Visual Studio 2008 (cmake) Windows 7 x64 Visual Studio 2008 (cmake) Windows 10 Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 10 x64 Visual Studio 2013 w/ Intel Fortran 15 (cmake) Debian7.5.0 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora20 3.15.3-200.fc20.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) GNU Fortran (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) (cmake and autotools) SUSE 13.1 3.11.10-17-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.8.1 GNU Fortran (SUSE Linux) 4.8.1 (cmake and autotools) Ubuntu 14.04 3.13.0-35-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 (cmake and autotools) hopper.nersc.gov PrgEnv-gnu/5.2.40 gcc (GCC) 4.9.2 20141030 (Cray Inc.) GNU Fortran (GCC) 4.9.2 20141030 (Cray Inc.) g++ (GCC) 4.9.2 20141030 (Cray Inc.) Known Problems ============== * On Windows platforms in debug configurations, the VFD flush1 tests will fail with the split and multi VFD drivers. These tests will display a modal debug dialog which must be answered or wait for the test timeout to expire. (ADB - 2014/06/23 - HDFFV-8851) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (Issue 8147). Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior shouldn't to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the Fortran and HL/Fortran tests fail. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All of the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian systems. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.15%%%% HDF5 version 1.8.15 released on 2015-05-04 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.14 and HDF5-1.8.15, and contains information on the platforms tested and known problems in HDF5-1.8.15. Links to the HDF5 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for HDF5 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document at this location: http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.14 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - CMake Improvements made to the CMake build system. The default options were changed to align with the Autotools configure defaults. CMake configure files now support components when packaged with CPack. Windows CPack supports WiX packaging, and will look for WiX and NSIS in the standard locations. The CMake minimum has been changed to 3.1. (ADB - 2015/04/01 HDFFV-8074, 8968, 9006) - cmakehdf5 for Cmake building. Added configure options to support the building of Fortran or CXX API, to enable/disable testings. Use "cmakehdf5 --help" for details. (AKC - 2014/12/09 HDFFV-8932) - Building Shared and Parallel Made Explicit When --enable-parallel is specified, configure used to disable shared by default. Removed the restriction for building shared when parallel is enabled. --disable-shared has to be used explicitly if user wishes to disable shared libraries. (MSC - 2015/02/19 HDFFV-9069) - Inferring Parallel Compilers configure was trying to infer if a compiler is a parallel compiler with MPI support and enable parallel even if the user did not explicitly enable parallel. This should not happen. Disabled inferring parallel compilers to enable parallel HDF5 build. --enable-parallel has to be used explicitly to build parallel HDF5 regardless of the compiler type being used. (MSC - 2015/02/19 HDFFV-9068) - Large File Support Configuration Option Removed the option to enable or disable large file support. It will always be enabled. (MSC - 2015/02/19 HDFFV-9097) - Removed Configuration Feature When configure detected that the CodeWarrior compiler was being used it would define a symbol that caused a test in test/tfile.c to be skipped due to a broken CodeWarrior open() command. Since this only masks the problem instead of fixing it and we don't support CodeWarrior anyway, this functionality was removed. (DER - 2015/02/21, HDFFV-9080) - VMS Build/Test Files Have Been Removed HDF5 no longer supports VMS, and the files were getting out of date. Since we have no access to a VMS machine, there is no way for us to maintain them. A Subversion tag was created at: https://svn.hdfgroup.uiuc.edu/tags/vms_last_support_1_8 immediately before removing the files. (DER - 2015-02-26, HDFFV-9147) - Removal of --with-default-vfd configure Option In theory, this option was intended to allow setting a default VFD that would be used by the library. In practice, the feature only accepted the POSIX (SEC2) VFD (already the default) and the stdio VFD (a demo VFD not intended for production use). The inability to pass key VFD parameters at configure time limits the full implementation of this feature, so it was retired. (DER - 2015-02-26, HDFFV-9081) - Direct VFD configure Behavior The configure options for Linux now allow the Direct VFD to build without passing additional compiler options/defines like _GNU_SOURCE. Passing --enable-direct-vfd is now all that is needed to enable the feature. The Direct VFD is now disabled by default since it is intended for specialized audiences. It was previously enabled by default, but the configure script did not set correct POSIX levels, etc. making this a moot point. Note that the Direct VFD can only be configured on Linux when the O_DIRECT flag to open()/create() and posix_memalign() function are available. This is unchanged from previous behavior. (DER - 2015-02-26, HDFFV-9057, 7567, 9088, 7566) - _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE No Longer Exported to h5cc and Other Compiler Wrappers The _POSIX_C_SOURCE, _GNU_SOURCE, and _BSD_SOURCE definitions are not required for using API functions and may conflict with user code requirements. (DER - 2015-03-08, HDFFV-9152) - Removed the --enable-filters Option from configure This option allowed the user to disable selected internal filters, presumably to make the library smaller. It has been removed since it saved little space (the internal filters are small with respect to the overall library size) and was not generally extendible to the library at large due to the large number of #ifdefs that would be required. Note that this features applied to internal filters such as shuffle and n-bit and not external filters like gzip or Szip. Those are still enabled or disabled via their own configure options. (DER - 2015-03-08, HDFFV-9086) - Removed Obsolete Time Functionality from configure and the C Library The library contained some residual functionality from obsolete time zone handling code. This has been removed, and the configure checks for the time functions have been cleaned up. * Lumped all the time functionality together in configure.ac. This was previously more spread out due to Solaris issues with the ordering of certain checks. * Removed processing that handles __tm_gmtoff members of struct tm. (libc-4) * Removed BSDgettimeofday(). (IRIX 5.3) * Removed timezone struct handling in gettimeofday() (considered harmful). Note that the HDF5 Library stores timestamps in a platform-independent manner, so old files can still be read. This only affects converting system time to HDF5 timestamps. The library currently uses the tm_gmtoff member of the tm struct (preferred, if available) or the timezone global variable to construct HDF5 timestamps. (DER - 2015-03-09, HDFFV-9083 and 9085) - Added -D_DEFAULT_SOURCE to CPPFLAGS on Linux Systems This is the replacement for -D_BSD_SOURCE in versions of glibc since 2.19. Since both are defined, it should work for all versions of glibc. Defining both suppresses the warning about defining _BSD_SOURCE. (NAF - 2015-04-02, HDFFV-9079) Library ------- - Added Memory Allocation Functions that Use the Library's Allocator HDF5 filters may need to allocate or resize the buffer that is passed to them from the library. If the filter has been compiled separately from the library, it and the library may use different memory allocation libraries for the (re)allocation and free calls. This can cause heap corruption and crashes. This is particularly a problem on Windows since each C run-time library is implemented as a separate shared library, but can also show up on POSIX systems when debug or high-performance allocation libraries are in use. Two new functions (H5allocate_memory() and H5resize_memory()) were added to the HDF5 C library. These functions have the same semantics as malloc/calloc and realloc, respectively. Their primary purpose is to allow filter authors to allocate or resize memory using the same memory allocation library as the HDF5 library. Filter authors are highly encouraged to use these new functions in place of malloc, calloc, and realloc. They should also use the H5free_memory() call when freeing memory. Note that the filters provided with the library (zlib, szip, etc.) do not experience the problems that these new functions are intended to fix. This work only applies to third-party filters that are compiled separately from the library. (DER - 2015-04-01, HDFFV-9100) - H5Pset_istore_k and H5Pset_sym_k These two functions didn't check the value of the input parameter "ik". When 2*ik exceeded 2 bytes of storage, data was lost in the file; for example, some chunks would be overwritten. Added validation of "ik" to not exceed the max v1 btree entries (2 bytes) to these two routines. (VC - 2015-03-24, HDFFV-9173) - Added Functions to Control the Value of H5PL_no_plugin_g without Using an Environment Variable Sometimes it is necessary for an application to disable the use of dynamically loaded plugin libraries without requiring the library to be built with plugin support disabled or to set an environment variable to disable plugin support globally. Two new functions (H5PLset_loading_state() and H5PLget_loading_state()) were added to the HDF5 C Library. These functions require a parameter that indicates which type of dynamically loaded plugin is enabled or disabled. (ADB - 2015-03-17, HDFFV-8520) Parallel Library ---------------- - MPI_Finalize and HDF5 Library Shutdown Calling HDF5 routines after MPI_Finalize has been closed should not be done, since those routines might call MPI functions that would not be possible to do after finalizing the MPI library. Attached an attribute destroy callback to MPI_COMM_SELF that shuts down the HDF5 library when MPI_COMM_SELF is destroyed, in other words, on MPI_Finalize. This should fix several issues that users see when they forget to close HDF5 objects before calling MPI_Finalize(). (MSC - 2015/02/25, HDFFV-883) Tools ----- - None High-Level APIs --------------- - None Fortran API ----------- - Added Global Variables These new global variables are equivalent to the C definitions without the '_F': H5G_UDLINK_F H5G_SAME_LOC_F H5O_TYPE_UNKNOWN_F H5O_TYPE_GROUP_F H5O_TYPE_DATASET_F H5O_NAMED_DATATYPE_F H5O_TYPE_NTYPES_F (MSB - 2015/02/03, HDFFV-9040) C++ API ------- - New Wrappers for C Functions H5P[s/g]et_libver_bounds Wrappers were added to class H5::FileAccPropList for the C Functions H5Pget_libver_bounds and H5Pset_libver_bounds. (BMR, 2015/04/06, Part of HDFFV-9167) - New Wrappers to Get the Object Header's Version The following wrappers are added to class H5::CommonFG Returns the object header version of an object in a file or group, given the object's name. unsigned childObjVersion(const char* objname) const; unsigned childObjVersion(const H5std_string& objname) const; (BMR, 2015/04/06) - New DataType Constructor Added a DataType constructor that takes a PredType object, and this constructor will invoke H5Tcopy to generate another datatype id from a predefined datatype. (BMR, 2015/04/06) Support for New Platforms, Languages, and Compilers =================================================== - Support for Linux 3.10.0-123.20.1.el7 added (LK - 2015/04/01) - Support for Mac OS X Yosemite 10.10 added (AKC - 2015/03/04, HDFFV-9007) - Support for AIX 6.1 added and AIX 5.3 is retired. (AKC - 2015/01/09) Bug Fixes since HDF5-1.8.14 =========================== Configuration ------------- - Make uninstall generated "test: argument expected". The error is due to $EXAMPLETOPDIR is used without setting a value first. Fixed by assign it with the proper value. (AKC - 2015/04/29, HDFFV-9298) - Windows Installer Incorrect Display of PATH Environment Variable In the Windows installer, the dialog box where the user can elect to add the product's bin path to the %PATH% environment variable displayed an incorrect path. This path was missing the C:\Program Files part and used the POSIX file separator '/' before the bin (/bin, instead of \bin). The dialog box text was changed to simply say that the product's bin path would be added instead of explicitly displaying the path. This is in line with most installers. The reason for not fixing the displayed path instead is that it is difficult to pass the correct path from CPack to the NSIS installer for display. Note that this was never a code issue - it was just a display problem. The installer always did the right thing when updating the environment variable. (DER - 2014/11/14, HDFFV-9016) Library ------- - Incorrect Usage of List in CMake COMPILE_DEFINITIONS set_property The CMake command set_property with COMPILE_DEFINITIONS property needs a quoted semi-colon separated list of values. CMake will transform the list to a series of -D{value} for the compile. (ADB - 2014/12/09, HDFV-9041) - Fixed Compile Errors on Windows w/ Visual Studio and CMake When UNICODE is Defined The HDF5 Library could not be built on Windows with Visual Studio when UNICODE was defined. This was due to the incorrect use of the TEXT() macro and some Win32 API functions that take TCHAR parameters. The faulty code was a part of the filter plugin functionality. This was a compile-time error that only affected users who build HDF5 from source and define UNICODE, usually when HDF5 is being built as a part of a larger product. There were no run-time effects. These errors caused no problems when UNICODE was not defined. HDF5 is normally not built with UNICODE defined and the binaries were unaffected. The fix was to remove the TEXT() macro and explicitly use the 'A' form of the Win32 API calls, which expect char strings instead of wchar_t strings. Note that HDF5 currently does not support Unicode file paths on Windows. (DER - 2015/02/22, HDFFV-8927) - Addition of Error Tracing Functionality to Several C API Calls A bug in a text processing script caused API calls that return a pointer to not receive error tracing macros/functionality. The bug has been corrected and error tracing functionality has been added to the affected API calls. These functions will now correctly print trace information when library errors are encountered. (DER - 2015/02/26, HDFFV-9141) - H5Rdereference Now Checks for HADDR_UNDEF or Uninitialized References When passed HADDR_UNDEF or uninitialized references, the previous behavior of H5Rdereference was to continue to process the reference as a valid address. H5Rdereference was changed to return immediately (with an error message) if the references are HADDR_UNDEF or uninitialized. (MSB - 2015/3/10, HDFFV-7959) - Fixed Bugs in H5Sextent_copy H5Sextent_copy would not free the previous extent, resulting in a memory leak. Also, H5Sextent_copy would not update the number of elements selected if the selection was "all", causing various problems. These issues have been fixed. (NAF - 2015/04/02) Parallel Library ---------------- - Fixed a Potential Memory Error Fixed a potential memory error when performing parallel I/O on a dataset with a single chunk, and at least one process has nothing to do. (NAF - 2015/02/16) - Parallel Test Problem Fixed Fixed problem with parallel tests where they failed beyond a certain number of ranks. All tests should work for any arbitrary number of ranks. (MSC - 2014/11/06, HDFFV-1027,8962,8963) - MPE Support Enabling MPE was causing HDF5 build to fail. Support for it was dropped at some point in time. Fixed problem with enabling MPE. Users should use the community maintained MPE on github (http://git.mpich.org/mpe.git/). (MSC - 2015/02/20, HDFFV-9135) Performance ------------- - None Tools ----- - h5repack crashed on enumerated 8-bit type. Previous version 1.8.14 introduced an error that caused the reading of enumerated 8-bit type nested in compound type to fail. Fixed library code responsible for reading the particular type. (AKC - 2015.03/31, HDFFV-8667) - h52gif crashed non-8bit images. h52gif crashed if instructed to convert images other than 8bit images. h52gif could handle only 8bit images. Added code to detect non-8bit images and flag them as failure. Update tool document page to reflect the limit. (AKC - 2015/03/31, HDFFV-8957) - perform/benchpar.c retired. benchpar.c has not been built for a long time and its original purpose is not needed any more. (AKC - 2014/12/19, HDFFV-8156) - Source perform/ directory moved to tools/perform. The perform directory is moved to tools/perform for easier maintenance. (AKC - 2014/12/17, HDFFV-9046) Fortran API ------------ - Fortran Fails with --enable-fortran2003 and Intel 15.x Compilers Added BIND(C) to the offending APIs. The Fortran Library (--enable-fortran2003) now works using Intel 15.x without the need for any additional compilers flags. (MSB - 2015/1/26, HDFFV-9049) - h5tenum_insert_f Does Not Work with Default 8 Byte Integers (xlf compiler) In the Fortran 90 API, 'value' is no longer cast into the C int type. Therefore, if h5tenum_insert_f is passed an 8 byte integer (via -i8) then 'value' is written as the same type as the default Fortran integer type (which can be 8 bytes). A new Fortran 2003 API was added which is more in line with the C API and users are strongly encouraged to use the Fortran 2003 API instead of the Fortran 90 API. SUBROUTINE h5tenum_insert_f(type_id, name, value, hdferr) INTEGER(HID_T) , INTENT(IN) :: type_id CHARACTER(LEN=*), INTENT(IN) :: name TYPE(C_PTR) , INTENT(IN) :: value INTEGER, INTENT(OUT) :: hdferr (MSB - 2015/2/19, HDFFV-8908) - Some Fortran APIs Never Returned the Error State Some Fortran APIs never returned the error state: they would always return a positive number. The APIs include the following: h5fget_file_image_f h5lget_name_by_idx_f h5oget_comment_by_name_f They were corrected to return a negative number as described in the Reference Manual if an error occurred. (MSB - 2015/3/19, HDF5-239) - Fixed h5pget_class_f h5pget_class_f never correlated the class identifier to the property list class name as indicated in the HDF5 Reference Manual; it instead returned a property list class identifier as an INTEGER. The INTEGER needed to be of type INTEGER(HID_T) to be correct. The h5pget_class_f API was changed to return an INTEGER(HID_T) property list class identifier instead of an INTEGER. This mimics the intended behavior of the C API. (MSB - 2015/3/16, HDFFV5-9162) C++ API ------ - Combined Two H5File::getObjCount Overloaded Methods The following two methods ssize_t getObjCount(unsigned types) const; ssize_t getObjCount() const; were combined into one: ssize_t getObjCount(unsigned types = H5F_OBJ_ALL) const; (BMR - 2015/04/06) - Many Warnings Were Removed Many warnings such as conversion, unused variables, missing base class initialization, and initializing base classes in wrong order were removed. (BMR, 2015/04/06) - Functionality Deprecation The following two constructors of classes AbstractDs, IdComponent, H5Location, and H5Object are no longer appropriate after the data member "id" had been moved from IdComponent to the sub-classes in previous releases. (const hid_t h5_id); (const & original); The copy constructors were no-op and removed in 1.8.15. The other constructors will be removed from 1.10 release, and then from 1.8.17 if their removal does not cause any problems. (BMR, 2015-04-06) High-Level APIs: ------ - Suppress Warnings from Flex/Bison-generated Code Warning suppression #pragmas, etc. have been added to H5LTparse.c and H5LTanalyze.c. We have no control over this code since it's created by a generator. (DER - 2015/03/08 - HDFFV-9149) - Changed hdf5_hl.h to Include the HDF5 Main Library "hdf5.h" User's no longer need to include both hdf5_hl.h and hdf5.h (MSB - 2015/2/14, HDFFV-8685) - H5PTcreate_fl Does Not Convert to Memory Datatype H5PTcreate_fl now converts to the table's native memory datatype to fix the problem of handling BE and LE packet tables. (MSB - 2015/2/26 - HDFFV-9042) - Fix for H5LT Attribute Functions H5LT attribute functions fail to create attributes whose name is a substring of an existing attribute. H5LT attribute functions can now create attributes whose name is a substring of an existing attribute. (MSB - 2015/2/24, HDFFV-9132) Fortran High-Level APIs: ------------------------ - Internal Library Fix for Missing Argument Declaration In Interface block for h5tbmake_table_c, "max_char_size_field_names" is listed as an input, but in the argument definitions it is "INTEGER :: max_char_size". This caused no known problems with the Fortran HL API. Fixed missing argument definition. (MSB - 2015/2/18, HDFFV-8559) Testing ------- - None Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 6.1 xlc/xlc_r 10.1.0.5 (NASA G-ADA) xlC/xlC_r 10.1.0.5 xlf90/xlf90_r 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-55) Version 4.8.4, 4.9.2 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 14.10-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 15.0.1.133 (Build 20141023) Linux 2.6.18-371.6.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 64-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-55) Version 4.8.4, 4.9.2 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 15.0.1.133 Build 20141023 Linux 2.6.32-431.11.2.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.8.2, Version 4.9.2 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 14.10-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 15.0.1.133 Build 20141023 Linux 3.10.0-123.20.1.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (moohan) Version 4.8.2 20140120 (Red Hat 4.8.2-16) Intel(R) C Intel(R) 64 Compiler XE for applications running on Intel(R) 64, Version 15.0.1.133 Build 20141023 Linux 2.6.32-431.29.2.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2008 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.34(0.285/5/3) gcc(4.9.2) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 15 (cmake) Visual Studio 2013 w/ Intel Fortran 15 (cmake) Mac OS X Mt. Lion 10.8.5 Apple clang/clang++ version 5.1 from Xcode 5.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 14.0.2 Mac OS X Mavericks 10.9.5 Apple clang/clang++ version 6.0 from Xcode 6.1.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (wren/quail) Intel icc/icpc/ifort version 14.0.2 Mac OS X Yosemite 10.10.2 Apple clang/clang++ version 6.0 from Xcode 6.1.1 64-bit gfortran GNU Fortran (GCC) 4.9.2 (osx1010dev/osx1010test) Intel icc/icpc/ifort version 15.0.1 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel SunOS 5.11 32-bit n y/y n y y y SunOS 5.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y n Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y y Mac OS X Yosemeti 10.10.2 64-bit n y/y n y y y AIX 6.1 32- and 64-bit n y/n n y y y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 GNU n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.4 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.0 Linux 3.10.0 x86_64 GNU y y/y y y y y CentOS 7.0 Linux 3.10.0 x86_64 Intel n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe SunOS 5.11 32-bit y y y y SunOS 5.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y Mac OS X Yosemeti 10.10.2 64-bit y n y y AIX 6.1 32- and 64-bit y n n y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.9 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.9 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 GNU y y y n CentOS 6.4 Linux 2.6.32 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 PGI y y y n CentOS 7.0 Linux 3.10.0 x86_64 GNU y y y n CentOS 7.0 Linux 3.10.0 x86_64 Intel y y y n Linux 2.6.32-431.11.2.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-308.13.1.el5PAE MPICH mpich 3.1.3 compiled with #1 SMP i686 i686 i386 gcc 4.9.2 and gfortran 4.9.2 (jam) g95 (GCC 4.0.3 (g95 0.94!) Linux 2.6.18-431.11.2.el6 MPICH mpich 3.1.3 compiled with #1 SMP x86_64 GNU/Linux gcc 4.9.2 and gfortran 4.9.2 (platypus) g95 (GCC 4.0.3 (g95 0.94!) FreeBSD 8.2-STABLE i386 gcc 4.5.4 [FreeBSD] 20110526 (loyalty) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 FreeBSD 8.2-STABLE amd64 gcc 4.5.4 [FreeBSD] 20110526 (freedom) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 Debian7.5.0 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora20 3.15.3-200.fc20.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) GNU Fortran (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) (cmake and autotools) SUSE 13.1 3.11.10-17-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.8.1 GNU Fortran (SUSE Linux) 4.8.1 (cmake and autotools) Ubuntu 14.04 3.13.0-35-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 (cmake and autotools) hopper.nersc.gov PrgEnv-gnu/5.2.40 gcc (GCC) 4.9.2 20141030 (Cray Inc.) GNU Fortran (GCC) 4.9.2 20141030 (Cray Inc.) g++ (GCC) 4.9.2 20141030 (Cray Inc.) Known Problems ============== * On Windows platforms in debug configurations, the VFD flush1 tests will fail with the split and multi VFD drivers. These tests will display a modal debug dialog which must be answered or wait for the test timeout to expire. (ADB - 2014/06/23 - HDFFV-8851) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (Issue 8147). Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior shouldn't to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.14%%%% HDF5 version 1.8.14 released on 2014-11-12 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.13 and HDF5-1.8.14, and contains information on the platforms tested and known problems in HDF5-1.8.14. All new and modified APIs are listed in the "HDF5 Software Changes from Release to Release" document along with details about previous releases at: http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html Links to the HDF5 1.8.14 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.14 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.14 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.13 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - bin/cmakehdf5 configures, builds and installs C, C++, Fortran and High level API's. (It used to build the C API only). (AKC 2014/10/17 HDFFV-8932). Library ------- - None Parallel Library ---------------- - Chunk Fill Writes Changed to Collective Slow performance in chunk fill writes. Chunk fills in the past were written independently by rank 0 one block at a time. Optimized the chunk fill write algorithm so that all chunk fill values will be written collectively in a single MPI-IO call. This should show a great performance improvement when creating chunked datasets in parallel when the chunk dimensions are fairly small. (MSC - 2014/08/22, HDFFV-8878) Tools ----- - None High-level APIs --------------- - None Fortran API ----------- - None C++ API ------- - Initialization of Object IDs The data member "id" in classes that represent HDF5 objects were initialized to 0, which caused problem for some users. Replaced 0 with H5I_INVALID_HID to initialize these "id"s. For the PropList class, H5P_DEFAULT is used instead of H5I_INVALID_HID. (BMR - 2014/09/30, HDFFV-4259) Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.13 =========================== Configuration ------------- - CMake and SVN URLs The SVN URLs will be different when the HDF Group domain name changes. Removed the SVN URL references in the cacheinit.cmake and release_docs files. (ADB - 2014/10/27, HDFFV-8953) - CMake Packaging A Fortran module was not generated if the compiler was not F2003 compliant. Removed the module name from the package list of Fortran modules because that module was never generated. This was only an issue for Fortran compliers that are not F2003 compatible. (ADB - 2014/10/16, HDFFV-8932) - Shared Library Interface Version Number (soname) In order to increase the maintainability of HDF5, an architectural change was made which required the renaming of several public symbols in H5Ppublic.h. The shared libary interface version number ("soname") has been increased on account of these changes. For a full list of the changed symbols, see the interface compatibility report, which is available as a link off of the 'HDF5 Software Changes from Release to Release' document: http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html (AKC - 2014/10/03, HDFFV-8937) - Configure Settings for Mac OSX Need Defaults for PROD_XXX, DEBUG_XXX, and PROFILE_XXX The configure setting files for Mac OSX (config/apple) did not have the default settings of PROD_XXX, DEBUG_XXX, PROFILE_XXX. Added the default settings. Mac platforms now builds library with "-O3" optimization when the default clang compiler is used. (AKC - 2014/10/01, HDFFV-8933) - CMake ConfigureChecks Two include files were missing from two C tests. Propagated the configure test changes to H5_LDOUBLE_TO_INTEGER_WORKS_TEST and H5_ULLONG_TO_LDOUBLE_PRECISION_TEST to ConfigureChecks.cmake (added stdlib.h and string.h in the HDFTests.c file). (ADB - 2014/09/02 HDFFV-8845) - CMake Parallel Test Missing The source file was removed in the previous release but the parallel test t_posix_compliant was not. Removed the t_posix_compliant parallel test from the library. (ADB - 2014/8/14 HDFFV-8880) - Autotools Reconfigure. Bison. Flex. The Bison and Flex files were out of date. Bison was upgraded to 2.7, and Flex was upgraded to 2.5.37. The bin/reconfigure script now will execute Bison and Flex and update the hl/src files. (ADB - 2014/06/16 HDFFV-8709) - Autotools Reconfigure. m4. The m4 macro processor was out of date. Reconfigured Autotools with m4 upgraded to 1.4.17. (ADB - 2014/06/12 HDFFV-8743) - Autotools: Modified configure to add an entry at the beginning of AM_LDFLAGS for the hdf5 install directory. Without this entry the relink commands invoked by "make install" to create libraries dependent on libhdf5.so added a dependency on the first libhdf5.so found in any directory in AM_LDFLAGS regardless of its version. (LRK - 2014/10/17 HDFFV-8944) - Changed Autotools Build Behavior. Fortran High-level Library. The Fortran high-level (HL) library did not compile if the default size of a REAL is DOUBLE PRECISION; the build would fail during compilation. Configure now checks to see if REAL is DOUBLE PRECISION, Fortran is enabled, and HL library is enabled. If this is true, then configure will stop with an error message. (MSB - 2014/8/11, HDFFV-8883/HDFFV-889) Library ------- - Fixed Identifier Management Code Opening an object returns an identifier; closing the object should free up the identifier. A problem was found where the identifiers were not being freed up correctly. Fixed the problem so that identifiers that have been used can be used again after their object has been closed. (QAK - 2014/10/16, HDFFV-8930) - Removal of DllMain() from Static Windows Builds A DllMain() function was added in HDF5 1.8.13 in order to handle win32 thread cleanup. The preprocessor #ifdefs around the DllMain function allowed it to be compiled when the static library is built, which is incorrect behavior that can cause linkage problems in clients. The fix was to change the preprocessor #ifdefs to exclude compiling DllMain() in static builds. Our DllMain function is now only compiled when the shared, thread-safe library is built on Windows. (DER - 2014/06/13, HDFFV-8837) - Enforce Constraint on page_size Parameter in H5Pset_core_write_tracking() The reference manual states that the page_size parameter cannot be zero. This change checks the page_size parameter to see it is zero and returns an error code if it is. (DER - 2014/08/11, HDFFV-8891) - H5Ldelete_by_idx() fails on non-existent group name. (MSC - 2014/07/31, HDFFV-8888) - H5Ldelete_by_idx() Seg Fault on Non-existent Group Name If a non-existent group name was used by H5Ldelete_by_idx(), a segmentation fault would result. Bug was fixed. (MSC - 2014/07/31, HDFFV-8888) - Bug in Test When Building Parallel HDF5 on PVFS2 There was a bug in a test when building Parallel HDF5 on PVFS2. The build now uses MPI_File_get_size() instead of stat(). (MSC - 2014/07/14, HDFFV-8856) - MPI-IO Driver Tried to Allocate Space for Zero-length Dataset MPI-IO driver tried to allocate space for zero-length dataset and asserts. Fixed driver and added a regression test. (MSC - 2014/07/03, HDFFV-8761) Parallel Library ---------------- - None Performance ------------- - None Tools ----- - None Fortran API ------- - SIZEOF Replaced by C_SIZEOF and STORAGE_SIZE. The intrinsic function SIZEOF is non-standard and should be replaced with a standard intrinsic function. If the F2008 intrinsic C_SIZEOF and STORAGE_SIZE are available, then they will be used instead of the non-standard SIZEOF intrinsic, even when the SIZEOF function is available. (MSB - 2014/6/16, HDFFV-8653) - Non-functional API: h5pget_fill_value_f The Fortran wrapper h5pget_fill_value_f was calling the wrong C API. The correct C API, H5Pget_fill_value, is now called by the Fortran wrapper. (MSB - 2014/9/25, HDFFV-8879) - Interoperability with C HDF5: H5Literate and h5literate_f h5literate_f assumes the return value for the callback function to be of type int (or int_f in C). However, in the C wrapper the return value of H5Literate is type herr_t, and this could cause interoperability issues. The callback function should be declared INTEGER(C_INT) for portability. The tests were updated accordingly. (MSB - 2014/9/26, HDFFV-8909) - Interoperability with C HDF5: Constant INTEGER Parameters with the H5FD Interface Wrong type cast of constant Fortran INTEGER parameters was used. The following parameter constant types were changed from INTEGER to INTEGER(HID_T) to match the C types: H5FD_CORE, H5FD_FAMILY, H5FD_LOG, H5FD_MPIO, H5FD_MULTI, H5FD_SEC2, and H5FD_STDIO. Other internal 'int' types where changed to 'hid_t'; these are transparent to the user. (MSB - 2014/7/18, HDFFV-8748) C++ API ------ - Memory Leaks There were several potential memory leaks in the library due to dynamically allocated strings not being freed when failure occurs. Applied user's patches to remove these potential memory leaks. (BMR - 2014/09/30, HDFFV-8928) - Disallow H5F_ACC_CREAT H5F_ACC_CREAT was included in the C++ API but the C library does not allow it at this time. Removed this flag from the functions in H5File class. (BMR - 2014/09/29, HDFFV-8852) - Missing Flags in Documentation: H5F_ACC_RDONLY and H5F_ACC_RDWR The H5F_ACC_RDONLY and H5F_ACC_RDWR flags were missing from the documentation of the H5File constructors. These two flags are now included in the documentation for opening files. (BMR - 2014/09/29, HDFFV-8852) High-level APIs: ------ - Seg Faults in H5TBread_field_name and H5TBread_field_name_f When H5TBread_field_name or H5TBread_field_name_f were used to read a field and if the name of the field was wrong, a segmentation fault would result. Both C and Fortran APIs were fixed so they no longer seg fault if the name of the field is wrong, and both APIs return a negative value if the name of the field is wrong. (MSB - 2014/09/29, HDFFV-8912) - Possible Buffer Overflow in High-level (HL) APIs Multiple HL APIs (H5DSis_scale is one example) had issues: (1) The datatype from the file was re-used as the memory datatype, and (2) No effort was made to ensure that strings were actually null-terminated. All of the HL routines now check for NULL pointers, for null-terminated strings, and to see if string buffers are short enough not to overflow the buffer. The minimum length of the buffers is now used in strncmp to avoid overflow. (MSB - 2014/9/29, HDFFV-8670) - Behavior Change of H5LTdtype_to_text If a user buffer was passed in to H5LTdtype_to_text along with the length, then the function would not truncate at the end of the buffer, but would exceed the end of the user buffer. H5LTdtype_to_text was changed to truncate the string if the user buffer is too small. (MSB - 2014/9/29, HDFFV-8855) Fortran High-level APIs: ------ - See entry for HDFFV-8912 above. Testing ------- - A subtest in parallel h5diff (ph5diff) testing was bypassed for the local Linux 32 machine due to unknown issue in the previous version of Mpich. The failure no long exists in the current Mpich. Therefore the bypass is removed. (AKC - 2014/11/03 HDFFV-8954) - Fixed incorrect exit code values (was -1) in testframe which is commonly used by several test programs. (AKC - 2014/07/22 HDFFV-8881) - Fixed Incorrect Exit Code Values in Testframe The testframe which is commonly used by several test programs had some incorrect exit code values. Fixed the incorrect exit code values. (AKC - 2014/07/22, HDFFV-8881) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.2 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 13.7-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 14.0.2 (Build 20140120) Linux 2.6.18-371.6.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 64-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.2 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 14.0.2 (Build 20140120) Linux 2.6.32-431.11.2.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.8.2 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 13.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 14.0.2 (Build 20140120) Linux 2.6.32-431.29.2.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4) IBM XL C/C++ V13.1 IBM XL Fortran V15.1 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2008 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 14 (cmake) Visual Studio 2013 w/ Intel Fortran 14 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.32(0.274/5/3) gcc(4.8.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 14 (cmake) Visual Studio 2013 w/ Intel Fortran 14 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 14 (cmake) Visual Studio 2013 w/ Intel Fortran 14 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 14 (cmake) Visual Studio 2013 w/ Intel Fortran 14 (cmake) Mac OS X Lion 10.7.5 Apple clang/clang++ version 3.0 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (duck) Intel icc/icpc/ifort version 13.0.3 Mac OS X Mt. Lion 10.8.5 Apple clang/clang++ version 5.1 from Xcode 5.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 14.0.2 Mac OS X Mavericks 10.9.5 Apple clang/clang++ version 6.0 from Xcode 6.0.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (wren) Intel icc/icpc/ifort version 14.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.11 32-bit n y/y n y y y Solaris2.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y n Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Lion 10.7.5 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.5 64-bit n y/y n y y y Mac OS X Mavericks 10.9.5 64-bit n y/y n y y ? AIX 5.3 32- and 64-bit n y/n n y y y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 GNU n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.4 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 PGI n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.11 32-bit y y y y Solaris2.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Lion 10.7.5 64-bit y n y y Mac OS X Mountain Lion 10.8.5 64-bit y n y y Mac OS X Mavericks 10.9.5 64-bit y n y y AIX 5.3 32- and 64-bit y n n y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.9 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.9 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 GNU y y y n CentOS 6.4 Linux 2.6.32 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 PGI y y y n Linux 2.6.32-431.11.2.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-308.13.1.el5PAE MPICH mpich 3.1.2 compiled with #1 SMP i686 i686 i386 gcc 4.9.1 and gfortran 4.9.1 (jam) g95 (GCC 4.0.3 (g95 0.94!) Linux 2.6.18-431.11.2.el6 MPICH mpich 3.1.2 compiled with #1 SMP x86_64 GNU/Linux gcc 4.9.1 and gfortran 4.9.1 (platypus) g95 (GCC 4.0.3 (g95 0.94!) FreeBSD 8.2-STABLE i386 gcc 4.5.4 [FreeBSD] 20110526 (loyalty) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 FreeBSD 8.2-STABLE amd64 gcc 4.5.4 [FreeBSD] 20110526 (freedom) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 Debian7.5.0 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora20 3.15.3-200.fc20.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) GNU Fortran (GCC) 4.8.3 20140624 (Red Hat 4.8.3-1) (cmake and autotools) SUSE 13.1 3.11.10-17-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.8.1 GNU Fortran (SUSE Linux) 4.8.1 (cmake and autotools) Ubuntu 14.04 3.13.0-35-generic #62-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 GNU Fortran (Ubuntu/Linaro 4.9.1-0ubuntu1) 4.9.1 (cmake and autotools) Cray Linux Environment (CLE) PrgEnv-pgi/4.2.34 hopper.nersc.gov pgcc 13.6-0 64-bit target on x86-64 Linux -tp istanbul pgf90 13.6-0 64-bit target on x86-64 Linux -tp istanbul pgCC 13.6-0 64-bit target on x86-64 Linux -tp istanbul Known Problems ============== * On cygwin platforms the feature to load dynamic filter libraries only looks for libraries with the a so extension. Support for cygwin cygxxx.dll libraries is planned for the next release. (ADB - 2014/11/04 - HDFFV-8736) * On windows platforms in debug configurations, the VFD flush1 tests will fail with the split and multi VFD drivers. These tests will display a modal debug dialog which must be answered or wait for the test timeout to expire. The flush1 and flush2 tests will be skipped under debug for this release. (ADB - 2014/06/23 - HDFFV-8851) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (Issue 8147). Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior shouldn't to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * The h5dump and h5diff utilities occasionally produce different output between Linux and Windows systems. This is caused by lower-level library routines that fail to write fill values to the user's buffer when reading unallocated chunks from datasets that have a fill value set to H5D_FILL_VALUE_DEFAULT. Due to platform differences the return of spurious data values has only been encountered on Windows 32-bit systems. (Issue HDFFV-8247; JP - 2013/03/27) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.13%%%% HDF5 version 1.8.13 released on 2014-05-05 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.12 and HDF5-1.8.13, and contains information on the platforms tested and known problems in HDF5-1.8.13. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.13 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.13 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.13 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.13 (current release) versus Release 1.8.12": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.12 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - Autotools: Automake updated to 1.14.1 (ADB - 2014/04/08) - CMake: Moved minimum CMake version to 2.8.11 which enables better library include processing. (ADB - 2014/03/26) - When configuring a thread-safe HDF5 Library it is no longer necessary to specify --enable-threadsafe with --with-pthreads if the Pthreads library is in a standard location. (DER - 2014/04/11 HDFFV-8693) Library ------- - Added an H5free_memory API call. This should be used to free memory that has been allocated by HDF5 API calls. H5Tget_member_name and H5Pget_class_name are two examples. The main motivation for this call is Windows, where it is common for application code and the HDF5 Library to be using different C run-time libraries (CRT). Using the new call ensures that the same CRT handles both the allocation and free. This new function can also be useful in any case where the library uses a different memory manager than the application, such as when a debug memory manager is in use or when the HDF5 Library is wrapped for use in a managed language like Python or Java. Fixes HDFFV-7710, 8519, and 8851. (DER - 2014/04/11) - The Core VFD (aka Memory VFD) can now be configured to track dirty regions in the file and only write out the changed regions on flush/close. Additionally, a "page aggregation" size can be set that will aggregate small writes into larger writes. For example, setting a 1 MiB page aggregation size will logically partition the the in-memory file into 1 MiB pages that will be written out in their entirety if even a single byte is dirtied. The feature is controlled via the new H5Pset/get_core_write_tracking() API call. A new "core_paged" target has been added to the check-vfd target in test/Makefile.am that exercises the feature over all HDF5 VFD-aware tests. (DER - 2014/04/12) Parallel Library ---------------- - Removed MPI-POSIX VFD, as it wasn't helping anyone and was just generating support questions. Application developers performing parallel I/O should always use the MPI-IO VFD. (QAK - 2014/03/28 HDFFV-8659) - Improved parallel I/O support to allow collective I/O on point selections. (QAK - 2014/03/15) Tools ----- - None High-Level APIs --------------- - None Fortran API ----------- - Wrappers h5pset_file_image_f and h5pget_file_image_f were added to the library. (MSB - 2014/1/2014) C++ API ------- - The following new features are added: + Wrappers to class H5Object to get an object's name (HDFFV-8548). ssize_t getObjName(char *obj_name, size_t buf_size = 0) ssize_t getObjName(H5std_string& obj_name, size_t len = 0) H5std_string getObjName() + Wrappers to class H5CommonFG to get a child object's type from a group or file (HDFFV-8367). H5O_type_t childObjType(const H5std_string& objname) H5O_type_t childObjType(const char* objname) H5O_type_t childObjType(hsize_t index, H5_index_t index_type=H5_INDEX_NAME, H5_iter_order_t order=H5_ITER_INC, const char* objname=".") + Wrappers to class DSetMemXferPropList for setting/getting a transform property list (HDFFV-7907). DSetMemXferPropList(const char* expression); void setDataTransform(const char* expression) void setDataTransform(const H5std_string& expression) ssize_t getDataTransform(char* exp, size_t buf_size=0) H5std_string getDataTransform() + Wrapper to CompType for setting size to compound datatype (HDFFV-8642). void setSize(size_t size) + Overloaded functions to provide prototypes that declare constant arguments const (HDFFV-3384). These include: DataSet::fillMemBuf DataSet::getVlenBufSize DataSpace::extentCopy DataType::commit FileAccPropList::setSplit H5File::getVFDHandle + Additional overload to class H5Location to get a comment as a char* ssize_t getComment(const char* name, size_t buf_size, char* comment) + Additional overloads to class Attribute to get an attribute's name for convenience: ssize_t getName(char* attr_name, size_t buf_size=0) ssize_t getName(H5std_string& attr_name, size_t buf_size=0) (BMR, 2014/04/15) + A static wrapper to Exception for printing the error stack without an instance of Exception static void printErrorStack(FILE* stream = stderr, hid_t err_stack = H5E_DEFAULT); (BMR, 2014/04/25) Support for New Platforms, Languages, and Compilers =================================================== Mac OS X 10.6 Snow Leopard is not supported by Apple any more. In view of the added support of Mac OS X 10.9, Mac OS X 10.6 is retired from HDF5 supported platforms. (AKC - 2014/03/14 HDFFV-8704) Mac OS X 10.9 Mavericks is supported. (AKC - 2014/03/04 HDFFV-8694) Bug Fixes since HDF5-1.8.12 =========================== Configuration ------------- - CMake: When CMake commands are executed individually on the command line and the external filters are being built, the CMAKE_BUILD_TYPE define must be set to the same value as the configuration (-DCMAKE_BUILD_TYPE:STRING=Release if using -C Release). This is needed by the the szip and zlib filter build commands. (ADB - HDFFV-8695) - CMake: Removed use of the XLATE_UTILITY program. (ADB - 2014/03/28 HDFFV-8640) - CMake: Added missing quotes in setting the CMAKE_EXE_LINKER_FLAGS for the MPI option. (ADB - 2014/02/27 HDFFV-8674) - CMake: Configuration of the HDF5 C++ or Fortran libraries with the thread-safety feature. C++ and/or Fortran + thread-safe is enforced as a non-supported configuration. This matches the autotools. (DER - 2014/04/11) - CMake: Configuration of static HDF5 C library with the thread-safety feature. Static + thread-safe + Win32 threads is not a supported configuration due to the inability to automatically clean up thread-local storage. This is expected to be fixed in a future release. In the meantime, a work-around that uses internal functionality may allow the combination to be used without resource leaks. Contact the help desk for more information. (DER - 2014/04/11) - Autotools: Several changes were done to configure and installcheck. An export of LD_LIBRARY_PATH= was removed from configure; make installcheck was revised to run scripts installed in share/hdf5_examples to use the installed h5cc, etc. to compile and run example source files also installed there. Make installcheck will now fail when a shared szip or other external lib file cannot be found in the same manner that executables compiled and linked with h5cc will fail to run when those lib files cannot be found after install. Make installcheck should pass after setting LD_LIBRARY_PATH to the szip location. (LRK - 2014/04/16) Library ------- - A Gnu Make directive (.NOTPARALLEL) is added to fortran/test/Makefile. AIX native make does not support this directive and would fail if parallel make (e.g. make -j4) is used to build the library. AIX users either do not use parallel make or install Gnu Make to build the library. (AKC 2014/04/08 HDFFV-8738) - H5R.c: H5Rget_name gave an assertion failure if the "name" parameter was NULL. Fixed H5Rget_name to return the size of the buffer needed to read a name of the referenced object in this case. The size doesn't include the NULL terminator. H5Rget_name returns negative on failure. (MSB - 2014/01/22 HDFFV-8620) - H5Z.c: H5Zfilter_avail didn't check if a filter was available as a dynamically loaded filter. The error manifested itself in the h5repack tool when removing user-defined dynamically loaded filter. Added a code to find the filter among the dynamically loaded filters after the function fails to find it among the registered filters. (ADB - 2014/03/03 HDFFV-8629) - Memory leak: a memory leak was observed in conjunction to the H5TS_errstk_key_g thread-local variable allocated in the H5E_get_stack function in H5E.c. The shared HDF5 thread-safe library now no longer leaks thread-local storage resources on Windows with Win32 threads. Currently, there is no solution for this problem when HDF5 is statically built. We disabled the build of the static HDF5 thread-safe library with Win32 threads. (DER - 2014/04/11 HDFFV-8518) - H5Dio.c: Improved handling of NULL pointers to H5Dread/H5Dwrite calls. Credit to Jason Newton (nevion@gmail.com) for the original patch. H5Dwrite/read failed when a NULL pointer was passed for a data buffer and 0 elements were selected. Fixed. (QAK - 2014/04/16 HDFFV-8705) - Deprecated API (1_6 API): Improved handling of closing the library and re-accessing it with a deprecated routine. When a program used a deprecated API (for example, H5Gcreate1), closed the library, and reopened it again to access a group, dataset, datatype, dataspace, attribute, or property list, HDF5 failed to provide an identifier for the object. Fixed. (NAF, QAK - 2014/04/16 HDFFV-8232) Parallel Library ---------------- - Fixed a missing H5F_Provisional module in HDF5mpio.f90 (MSB - 2014/2/7 HDFFV-8651) Performance ------------- - None Tools ----- - The h5diff tool would report that a datafile compared with an exact copy of the same datafile had differences. This was due to the issue below of reading un-written chunks. This problem is also fixed. (AKC - 2014/05/01 HDFFV-8637) - The h5dump and h5diff utilities occasionally produced different output between Linux and Windows systems. This has been fixed. This happened to datasets that used chunked storage, with default fill values, and some of the chunks had not been written. When the dataset was read, the library failed to write the default fill values to parts of the use buffer that were associated with the unwritten chunks. (JP - 2014/05/01 HDFFV-8247) - The compress option is retired from bin/release. (AKC - 2014/04/25 HDFFV-8755) - bin/release has a new option "zip" that produces a release zip file for the Windows platform. (AKC - 2014/04/24 HDFFV-8433) - h5diff: Several failures relating to handling of strings attributes are fixed. The tool crashed or gave an error message when one of the strings had fixed size type and another variable-length size type. h5diff now flags such strings as "not comparable". We plan to enhance the tool to handle strings of the different types in the future releases. (AKC - 2014/04/18 HDFFV-8625, 8639, 8745) - h5repack: h5repack would not remove user-defined filters. Fixed by modifying h5repack to check if the filter is registered or can be dynamically loaded. (ADB - 2014/03/03 HDFFV-8629) F90 API ------- - H5D_CHUNK_CACHE_NSLOTS_DFLT_F and H5D_CHUNK_CACHE_NBYTES_DFLT_F were changed from the default KIND for INTEGER to INTEGER of KIND size_t. (MSB - 2014/3/31 HDFFV-8689) C++ API ------ - Added throw() to all exception destructors. Credit to Jason Newton (nevion@gmail.com) for the patch. (BMR - 2014/4/15 HDFFV-8623) - Changed the default value for H5Location::getComment from 256 to 0 to conform to C function and because it makes more sense. (BMR - 2014/4/15) High-Level APIs: ------ - None Fortran High-Level APIs: ------ - None Testing ------- - testhdf5 now exits with EXIT_SUCCESS(0) if no errors, else EXIT_FAILURE(1). (AKC - 2014/01/27 HDFFV-8572) - The big test now pays attention to the HDF5_DRIVER environment variable. Previously, it would run all tests with the family, stdio, and sec2 virtual file drivers (VFDs) for each VFD in the check-vfd make target, regardless of the variable setting. It now checks the variable and either runs the appropriate VFD-specific tests or skips as needed. This saves much testing time. Fixes HDFFV-8554. (DER - 2014/04/11) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 gmake v3.82 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.2 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 13.7-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 14.0.2 (Build 20140120) Linux 2.6.18-371.6.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 64-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.2 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 13.7-0 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 14.0.2 (Build 20140120) Linux 2.6.32-431.11.2.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.8.2 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 13.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 14.0.2 (Build 20140120) Linux 2.6.32-431.11.2.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) IBM XL C/C++ V11.1 IBM XL Fortran V13.1 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2008 w/ Intel Fortran 14 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 14 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.28(0.271/5/3) gcc(4.8.2) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 14 (cmake) Visual Studio 2010 w/ Intel Fortran 14 (cmake) Visual Studio 2012 w/ Intel Fortran 14 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 14 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 14 (cmake) Mac OS X Lion 10.7.3 Apple clang/clang++ version 3.0 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.6.2 (duck) Intel icc/icpc/ifort version 13.0.3 Mac OS X Mt. Lion 10.8.5 Apple clang/clang++ version 5.0 from Xcode 5.0.2 64-bit gfortran GNU Fortran (GCC) 4.8.2 (swallow/kite) Intel icc/icpc/ifort version 14.0.2 Mac OS X Mavericks 10.9.2 Apple clang/clang++ version 5.1 from Xcode 5.1 64-bit gfortran GNU Fortran (GCC) 4.8.2 (wren/quail) Intel icc/icpc/ifort version 14.0.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.11 32-bit n y/y n y y y Solaris2.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/y n y y y Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Lion 10.7.3 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.1 64-bit n y/y n y y y Mac OS X Mavericks 10.9.1 64-bit n y/y n y y y AIX 5.3 32- and 64-bit n y/n n y y y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 GNU n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 6.4 Linux 2.6.32 x86_64 Intel n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 PGI n y/y n y y y Linux 2.6.32-431.11.2.el6.ppc64 n y/n n y y y OpenVMS IA64 V8.4 n y/n n y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.11 32-bit y y y y Solaris2.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Lion 10.7.3 64-bit y n y y Mac OS X Mountain Lion 10.8.1 64-bit y n y y Mac OS X Mavericks 10.9.1 64-bit y n y y AIX 5.3 32- and 64-bit y n n y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.9 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.9 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 GNU y y y n CentOS 6.4 Linux 2.6.32 x86_64 Intel y y y n CentOS 6.4 Linux 2.6.32 x86_64 PGI y y y n Linux 2.6.32-431.11.2.el6.ppc64 y y y n OpenVMS IA64 V8.4 n n n n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-308.13.1.el5PAE MPICH mpich 3.1 compiled with #1 SMP i686 i686 i386 gcc 4.8.2 and gfortran 4.8.2 (jam) g95 (GCC 4.0.3 (g95 0.94!) Linux 2.6.18-431.11.2.el6 MPICH mpich 3.1 compiled with #1 SMP x86_64 GNU/Linux gcc 4.8.2 and gfortran 4.8.2 (platypus) g95 (GCC 4.0.3 (g95 0.94!) FreeBSD 8.2-STABLE i386 gcc 4.5.4 [FreeBSD] 20110526 (loyalty) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 FreeBSD 8.2-STABLE amd64 gcc 4.5.4 [FreeBSD] 20110526 (freedom) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 Debian7.1.0 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora20 3.11.10-301.fc20.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.2 20131212 (Red Hat 4.8.2-7) GNU Fortran (GCC) 4.8.2 20130603 (Red Hat 4.8.2-7) (cmake and autotools) SUSE 13.1 3.11.6-4-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.8.1 GNU Fortran (SUSE Linux) 4.8.1 (cmake and autotools) Ubuntu 13.10 3.11.0-13-generic #20-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1 GNU Fortran (Ubuntu/Linaro 4.8.1-10ubuntu8) 4.8.1 (cmake and autotools) Cray Linux Environment (CLE) PrgEnv-pgi/4.0.46 hopper.nersc.gov pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai Known Problems ============== * When reading or writing a dataset (H5Dread/H5Dwrite) with a large selection size (e.g., 2GB ~= 500 million of 4 bytes integers or floating point numbers), some I/O systems may not be able to process it correctly. We advise users to find out system limits before using large selections. If I/O size limits exist, application should use HDF5 partial I/O capabilities (e.g., H5Sselect_hyperslab(...)) to divide large requests into smaller sizes. In this case we also advise users not to use chunk storage sizes larger that 2GB since the HDF5 library performs I/O on the entire chunk. We will work on the HDF5 library to divide large data requests to smaller I/O requests. (AKC 2014/05/02 HDFFV-8479) * Due to an Intel compiler bug introduced in version 14.0.1, the HDF5 FORTRAN wrappers do not work with configure option --enable-fortran2003. However, the option --enable-fortran works with Intel 14.0.1. The compiler bug was fixed in Intel version 14.0.2 and resolved the issue. (MSB - 2014/4/15) * Due to a PGI compiler bug introduced in versions before 13.3 and versions after 14.2, the FORTRAN test 'Testing get file image' will fail. (MSB - 2014/4/15) * On CYGWIN, when building the library dynamically, testing will fail on dynamically loaded filters. The test process will build dynamic filter libraries with the *.dll.a extension, and the HDF5 Library will be looking for *.so libraries. Entered as issue HDFFV-8736. (ADB - 2014/04/14) * A Gnu Make directive (.NOTPARALLEL) is added to fortran/test/Makefile. AIX native make does not support this directive and would fail if parallel make (e.g. make -j4) is used to build the library. AIX users either do not use parallel make or install Gnu Make to build the library. (AKC 2014/04/08 HDFFV-8738) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c. Since the algorithm is trying to detect the alignment of integers, ideally the flag -fcatch-undefined-behavior should not to be used for H5detect.c. In the future, we can separate flags for H5detect.c from the rest of the library. (SLU - 2013/10/16 HDFFV-8147) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install the HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * On OpenVMS, two soft conversion functions (H5T__conv_i_f and H5T__conv_f_i) have bugs. They convert data between floating-point numbers and integers. But the library's default is hard conversion. The user should avoid explicitly enabling soft conversion between floating-point numbers and integers. (Issue VMS-8; SLU - 2013/09/19) * On OpenVMS, ZLIB 1.2.8 library doesn't work properly. ZLIB 1.2.5 works fine. So please use ZLIB 1.2.5 to build HDF5 library. (Issue VMS-5; SLU 2013/09/19) * When building using the Cray compilers on Cray machines, HDF5 configure mistakenly thinks the compiler is an intel compiler and sets the -std=c99 flag which breaks configure on Cray. To build HDF5 properly on a Cray machine, please consult with the instructions in INSTALL_parallel for building on Hopper. (MSC - 2013/04/26 - HDFFV-8429) * The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp. It complains with this message: "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined. The reason is that __func__ is a predefined identifier in C99 standard. The HDF5 C library uses it in H5private.h. The test ttypes.cpp includes H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h). Sun's 5.9 C++ compiler doesn't support __func__, thus fails to compile the C++ test. But Sun's 5.11 C++ compiler does. To check whether your Sun C++ compiler knows this identifier, try to compile the following simple C++ program: #include int main(void) { printf("%s\n", __func__); return 0; } (SLU - 2012/11/5) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it's a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernal (3.2.2 on Fedora) doesn't have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with gcc 4.7.2. * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.12%%%% HDF5 version 1.8.12 released on 2013-11-04 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.11 and HDF5-1.8.12, and contains information on the platforms tested and known problems in HDF5-1.8.12. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.12 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.12 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.12 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.12 (current release) versus Release 1.8.11": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.11 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - Added a configuration option to change the default plugin path. The configure option is --with-default-plugindir=location. The cmake option is -DH5_DEFAULT_PLUGINDIR:PATH=location. HDFFV-8513. (ADB 2013/09/04) - Renamed FFLAGS to FCFLAGS in configure. (ADB 2013/08/13) - CMake can now package a compressed examples file, the default for Windows binaries from HDF Group. (ADB - 2013/07/22) Library ------- - None Parallel Library ---------------- - None Tools ----- - h5repack: Added the ability to use plugin filters to read and write files. The option uses the filter number. HDFFV-8345 (ADB - 2013/09/04). - h5dump: Added the option -N --any_path, which searches the file for paths that match the search path. HDFFV-7989 (ADB - 2013/08/12). - h5dump: Added the optional arg 0 to -A, which excludes attributes from display. HDFFV-8134 (ADB - 2013/08/01). High-Level APIs --------------- - None Fortran API ----------- - None C++ API ------- - Added tutorial examples to C++/examples. They can be installed by "make install-examples" and, in the installed directory, they can be executed by running the script file run-c++-ex.sh. (BMR - 2013/09/28) - A new class, H5::H5Location, is added to represent the location concept in the C library. It is a base class to H5::H5File and H5::H5Ojbect, whose member functions are moved into H5::H5Location. H5::H5File can now inherent those functions. As a result, an H5::H5File object can have an attribute. (BMR - 2013/09/27) - Added wrappers for H5Rget_obj_type2 to retrieve the type of the object that an object reference points to. (BMR - 2013/09/27) H5O_type_t H5Location::getRefObjType(void *ref, H5R_type_t ref_type) - Added wrappers for H5Aexist to check whether an attribute exists given a name. (BMR - 2013/09/27) bool H5::H5Location::attrExists(const char* name) bool H5::H5Location::attrExists(const H5std_string& name) - Added a number of overloaded functions for convenience. (BMR - 2013/09/27) Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.11 =========================== Configuration ------------- - Modified H5detect.c to scan floating point types for padding bits before analyzing the type further. This should fix problems with gcc 4.8. (NAF - 2013/09/19 - HDFFV-8523/HDFFV-8500) - HDF5 rpaths are no longer encoded in the library files when configured with --disable-sharedlib-rpath. (LRK-2013-09-23 - HDFFV-8276) Library ------- - Added const qualifier to source buffer parameters in H5Dgather and H5D_scatter_func_t (H5Dscatter callback). (NAF - 2013/7/09) - CMake now creates *.so.{lt_version} files with the same version as configure. (ADB - 2013/06/05 HDFFV-8437) Parallel Library ---------------- - None Performance ------------- - None Tools ----- - h5dump: Added the option -N --any_path, which searches the file for paths that match the search path. HDFFV-7989 (ADB - 2013/08/12). - h5dump: Added the optional arg 0 to -A, which excludes attributes from display. HDFFV-8134 (ADB - 2013/08/01). - h5dump correctly exports subsetted data to a file, using the --output option. (ADB - 2013/06/07 HDFFV-8447) - h5cc and other compile scripts now default to linking shared libraries when HDF5 is configured with the --disable-static option. (LRK - 2013-09-23 - HDFFV-8141) F90 API ------- - None C++ API ------ - None High-Level APIs: ------ - None Fortran High-Level APIs: ------ - None Testing ------- - test/big sometimes failed with the message of "file selection+offset not within extent". This has been fixed. (AKC - 2013/09/28 HDFFV-8271). - tools/h5diff/testh5diff.sh is run in every "make check", even after it has passed in the previous run. It should not run again if there are no code changes. Fixed. (AKC - 2013/07/19 HDFFV-8392) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.1 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 13.7-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 13.1.3 (Build 20130607) Linux 2.6.18-308.16.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 64-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.8.1 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 13.7-0 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 13.1.3 (Build 20130607) Linux 2.6.32-358.18.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.8.1 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 13.7-0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 13.1.3 (Build 20130607) Linux 2.6.32-358.18.1.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) IBM XL C/C++ V11.1 IBM XL Fortran V13.1 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2008 w/ Intel Fortran 11 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Visual Studio 2012 w/ Intel Fortran 13 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Visual Studio 2012 w/ Intel Fortran 13 (cmake) Windows 8.1 Visual Studio 2012 w/ Intel Fortran 13 (cmake) Windows 8.1 x64 Visual Studio 2012 w/ Intel Fortran 13 (cmake) Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 64-bit gfortran GNU Fortran (GCC) 4.6.2 (fred) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1 Build 20120928 Mac OS X Lion 10.7.3 Apple clang/clang++ version 3.0 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.6.2 (duck) Intel icc/icpc/ifort version 13.0.3 Mac OS X Mountain Lion 10.8.1 Apple clang/clang++ version 4.2 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.6.2 (wren) Intel icc/icpc/ifort version 13.0.3 OpenVMS IA64 V8.4 HP C V7.3-018 HP Fortran V8.2-104939-50H96 HP C++ V7.4-004 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.11 32-bit n y/y n y y y Solaris2.11 64-bit n y/y n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/n n y y y Windows 8.1 n y/y n y y y Windows 8.1 x64 n y/y n y y y Mac OS X Snow Leopard 10.6.8 64-bit n y/y n y y y Mac OS X Lion 10.7.3 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.1 64-bit n y/y n y y y AIX 5.3 32- and 64-bit n y/n n y y y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 PGI n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 GNU n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 Intel n y/y n y y y Linux 2.6.32-358.2.1.el6.ppc64 n y/n n y y y OpenVMS IA64 V8.4 n y/n n y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.11 32-bit y y y y Solaris2.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 8.1 y y y y Windows 8.1 x64 y y y y Mac OS X Snow Leopard 10.6.8 64-bit y n y n Mac OS X Lion 10.7.3 64-bit y n y y Mac OS X Mountain Lion 10.8.1 64-bit y n y y AIX 5.3 32- and 64-bit y n n y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.9 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.9 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel y y y n CentOS 5.9 Linux 2.6.18 x86_64 PGI y y y n CentOS 6.4 Linux 2.6.32 x86_64 GNU y y y n CentOS 6.4 Linux 2.6.32 x86_64 Intel y y y n Linux 2.6.32-358.2.1.el6.ppc64 y y y n OpenVMS IA64 V8.4 n n n n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-308.13.1.el5PAE MPICH mpich2-1.4.1p1 compiled with #1 SMP i686 i686 i386 gcc 4.1.2 and gfortran 4.1.2 (jam) g95 (GCC 4.0.3 (g95 0.94!) Linux 2.6.18-308.16.1.el5 MPICH mpich2-1.4.1p1 compiled with #1 SMP x86_64 GNU/Linux gcc 4.1.2 and gfortran 4.1.2 (koala) g95 (GCC 4.0.3 (g95 0.94!) FreeBSD 8.2-STABLE i386 gcc 4.5.4 [FreeBSD] 20110526 (loyalty) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 FreeBSD 8.2-STABLE amd64 gcc 4.5.4 [FreeBSD] 20110526 (freedom) gcc 4.6.1 20110527 g++ 4.6.1 20110527 gfortran 4.6.1 20110527 Debian7.1.0 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux gcc (Debian 4.7.2-5) 4.7.2 GNU Fortran (Debian 4.7.2-5) 4.7.2 (cmake and autotools) Fedora19 3.11.1-200.fc19.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.8.1 20130603 (Red Hat 4.8.1-1) GNU Fortran (GCC) 4.8.1 20130603 (Red Hat 4.8.1-1) (cmake and autotools) SUSE 12.3 3.7.10-1.16-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.7.2 GNU Fortran (SUSE Linux) 4.7.2 (cmake and autotools) Ubuntu 13.04 3.8.0-30-generic #44-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU Fortran (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 (cmake and autotools) Cray Linux Environment (CLE) PrgEnv-pgi/4.0.46 hopper.nersc.gov pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai Known Problems ============== * Several HDF5 command-line tools and tests leave behind generated files that are not cleaned up with "make clean" or "make distclean" when software is built in place. The issue will be addressed in the 1.8.13 release. We recommend to use build directory to compile and test HDF5 as described in the INSTALL file, section 4.2. * Source directory names with spaces in them will cause failures in configure or make on Mac (HDFFV-8152), Linux, and probably all other platforms. If a configure command with a space is run from a build directory, it will exit with an error message: "checking whether build environment is sane... configure: error: unsafe srcdir value: '/scr/lrknox/hdf5 v1.8.12'". If configure is run inside or below the directory with the space in the name, libtool will get the directory path from the system, put the part of the path before the space in the libdir variable in .../src/libhdf5.la, and then fail to find the nonexistent directory. This is a known libtool issue and the suggested workaround is to rename the directory without spaces. (LRK - 2013/10/22) * CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv catches some undefined behavior in the alignment algorithm of the macro DETECT_I in H5detect.c (HDFFV-8147). This issue will be addressed in the next release. (SLU - 2013/10/16) * Running make check for the tools can fail in the tools tests if make was not run prior. The tests for the tools use other tools in the tests, therefore all the tools should be built before testing the tools. (ADB - 2013/10/09) * Make provided by Solaris fails in "make check". Solaris users should use gmake to build and install HDF5 software. (AKC - 2013/10/08 - HDFFV-8534) * On OpenVMS, two soft conversion functions (H5T__conv_i_f and H5T__conv_f_i) have bugs. They convert data between floating-point numbers and integers. But the library's default is hard conversion. The user should avoid explicitly enabling soft conversion between floating-point numbers and integers. (Issue VMS-8; SLU - 2013/09/19) * On OpenVMS, ZLIB 1.2.8 library doesn't work properly. ZLIB 1.2.5 works fine. So please use ZLIB 1.2.5 to build HDF5 library. (Issue VMS-5; SLU 2013/09/19) * When building using the Cray compilers on Cray machines, HDF5 configure mistakenly thinks the compiler is an intel compiler and sets the -std=c99 flag which breaks configure on Cray. To build HDF5 properly on a Cray machine, please consult with the instructions in INSTALL_parallel for building on Hopper. (MSC - 2013/04/26 - HDFFV-8429) * The h5dump and h5diff utilities occasionally produce different output between Linux and Windows systems. This is caused by lower-level library routines that fail to write fill values to the user's buffer when reading unallocated chunks from datasets that have a fill value set to H5D_FILL_VALUE_DEFAULT. Due to platform differences the return of spurious data values has only been encountered on Windows 32-bit systems. (Issue HDFFV-8247; JP - 2013/03/27) * The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp. It complains with this message: "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined. The reason is that __func__ is a predefined identifier in C99 standard. The HDF5 C library uses it in H5private.h. The test ttypes.cpp includes H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h). Sun's 5.9 C++ compiler doesn't support __func__, thus fails to compile the C++ test. But Sun's 5.11 C++ compiler does. To check whether your Sun C++ compiler knows this identifier, try to compile the following simple C++ program: #include int main(void) { printf("%s\n", __func__); return 0; } (SLU - 2012/11/5) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it is a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernel (3.2.2 on Fedora) do not have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with gcc 4.7.2. * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.11%%%% HDF5 version 1.8.11 released on 2013-05-08 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.10 and HDF5-1.8.11-*, and contains information on the platforms tested and known problems in HDF5-1.8.11-*. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.11 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.11 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.11 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.11 (current release) versus Release 1.8.10": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.10 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - Libtool version number is changed to 8.0.0 because there are API changes. See below for details. (AKC - 2013/05/07 HDFFV-8435) - Mac OS X 10.7 (Lion) and 10.8 (Mountain Lion) uses clang/clang++ as the default C and C++ compilers. (AKC - 2013/04/19 HDFFV-8245) - CMake minimum is now 2.8.10. (ADB 2013/1/14) - A new tool, cmakehdf5, which is a build command script similar to buildhdf5 is added and is available in the bin directory. (AKC - 2013/01/16 HDFFV-8336) Library ------- - The library can load filter libraries dynamically during runtime. Users can set the search path through environment variable HDF5_PLUGIN_PATH and call H5Pset_filter to enable a dynamic filter. (SLU - 2013/04/08) - Added new API functions H5Dscatter and H5Dgather to scatter data to and and gather data from a selection within a memory buffer. (NAF - 2013/02/05) - The library now supports the data conversion from enumeration to numeric (integer and floating-point number) datatypes. See Issue HDFFV-8221. (SLU - 2012/10/23) Parallel Library ---------------- - None Tools ----- - h5dump: added new option -O or -ddl to output the ddl text to a file. This is a complement to the -o or --output option, which redirects the data to a file. HDFFV-8229 (ADB - 2013/2/25) High-Level APIs --------------- - A new API function, H5DOwrite_chunk. This function writes a data chunk directly into a file, bypassing hyperslab selection, data conversion, and the filter pipeline. The user must be careful with the function and clearly understand the I/O process of the library. (SLU - 2013/2/11) Fortran API ----------- - New API functions added (MSB - 2013/3/23): h5odecr_refcount_f, h5oexists_by_name_f, h5oget_comment_f, h5oget_comment_by_name_f, h5oincr_refcount_f, h5oopen_by_idx_f, h5oset_comment_f, h5oset_comment_by_name_f, h5oset_comment_by_name_f F2003: h5oget_info_f, h5oget_info_by_idx_f, h5ovisit_by_name_f C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - SunOS 5.11 (emu) 32-bit and 64-bit with Sun C/C++ 5.12 compiler and Sun Fortran 95 8.6 compiler. - Visual Studio 2012 w/ Intel Fortran 13 on Windows 7 - g95 released new version recently and is tested in this release. Bug Fixes since HDF5-1.8.10 ========================== Configuration ------------- - Fixed Thread-safe configure failure for the AIX platform. (AKC - 2013/04/19 HDFFV-8390) - Configure will check the result of header searches before searching for the library. Fixes HDFFV-8257 (ADB 2013/03/04) - HDF does not support building SHARED Fortran libraries on OSX. Added CMake code to check for this condition. Fixes HDFFV-8227 (ADB 2013/03/04) - CMake builds on Windows will no longer use legacy naming for libraries. The "dll" tag will no longer be added to the name of *.lib and *.dll. The option HDF_LEGACY_NAMING is now OFF by default. Fixes HDFFV-8292 (ADB 2013/01/30) Library ------- - The library now behaves correctly when performing large I/O operations on Mac OS-X. Previously, single I/O operations > 2 GB would fail since the Darwin read/write calls cannot handle the number of bytes that their parameter types imply. Fixes HDFFV-7975 and HDFFV-8240 (DER 2013/01/07) - Fixed a bug in the core VFD that causes failures when opening files > 2 GB. Fixes HDFFV-8124 and HDFFV-8158 (DER 2013/01/07) - Fixed a bug where unintialized memory was read during variable-length type conversion. This caused segfaults in netCDF. Fixes HDFFV-8159. (DER 2013/03/30) - Removed the H5Pset/get_dxpl_multi functions from the library. The intended functionality for them was never fully implemented, and they have always been fundamentally broken. NOTE: This does not affect setting the multi VFD or any expected VFD functionality. Multi VFD usage remains unchanged. Fixes HDFFV-8296. (DER 2013/03/30) Parallel Library ---------------- - None Performance ------------- - None Tools ----- - h5redeploy is changed to do this by default: Installation directories: prefix architecture-independent files. exec_prefix architecture-dependent files, default is . libdir libraries, default is /lib. includedir header files, default is . This allows users to just change the first line of prefix=<...> and the effect will change libdir and includedir too. (AKC 2013/04/05 HDFFV-8358) - h5repack: Fixed failure to convert the layout of a small chunked dataset (size < 1K) to contiguous layout. HDFFV-8214 (JKM 2013/03/26) - h5dump: Fixed displaying compression ratio for unknown or user-defined filters. HDFFV-8344 (XCAO 2013/03/19) - h5dump: Changed UNKNOWN_FILTER to USER_DEFINED_FILTER for user defined filter. HDFFV-8346 (XCAO 2013/03/19) - h5diff: Fixed to return the correct exit code 1 when the program detects a unique extra attribute. Prior to this fix, h5diff returned exit code 0 indicating the two files are identical. HDFFV-7643 (JKM 2013/02/15) - h5dump: Fixed writing nulls to a binary file when exporting a dataset with compound string datatype. HDFFV-8169 (ADB 2013/1/31) - The following h5stat test case failed in BG/P machines (and potentially other machines that display extra output if an MPI task returns with a non-zero code.) Testing h5stat notexist.h5 The test script was fixed to ignore the extra output. HDFFV-8233 (AKC - 2012/11/30) - h5diff: Improved speed when comparing HDF5 files with lots of attributes. Much slower performance was identified with release versions from 1.8.7 to 1.8.10 compared to 1.8.6. (JKM 2012/10/19) F90 API ------- - The integer type of the 'offset' argument in h5pset_external_f and h5pget_external_f was changed to INTEGER(KIND=OFF_T) to support 8-byte integers, matching the C type definition of off_t. (MSB - 2013/3/23) - h5fc updated to recognize .f95, .f03 and .f08 file extensions. C++ API ------ - The C++ wrappers DSetMemXferPropList::setMulti/getMulti were removed because the C functions H5Pset/get_dxpl_multi functions are removed from the library. Fixes HDFFV-8296 by DER. (BMR 2013/03/30) - An exception thrown by an internal function was not propagating to the test program during stack unwinding, so it couldn't be caught by the test, and the program terminated "without an active exception." It seemed that the problem happened when c_str() was used to generate an equivalent const char* from a std::string and the resulting string was passed to the internal function. As a work-around, we added a try/catch around the the call to the internal function and when the exception is caught there, it is re-thrown. Fixes HDFFV-8067. (BMR 2013/03/30) High-Level APIs: ------ - Fixed a problem with H5DSget_scale_name including the NULL terminator in the size calculation returned by the function. The API was changed to NOT include the NULL terminator in the size of name returned (MSB- 2013/2/10) Fortran High-Level APIs: ------ - None Testing ------- - In some Mac systems, testlibinfo.sh failed with this error: Check file ../src/.libs/libhdf5.7.dylib strings: object: ../src/.libs/libhdf5.7.dylib malformed object \ (unknown load command 15) The strings command of Mac systems inspects library files, and older versions of strings may not know newer library formats, resulting in errors. Fixed by sending the library file as stdin to the strings command to avoid this problem. (AKC - 2013/03/08 HDFFV-8305) - Fixed a typo in the ERROR macro in test/testhdf5.h. It segmentation faulted when used before. (AKC - 2013/02/12 HDFFV-8267) Supported Platforms =================== The following platforms are supported and have been tested for this release. They are built with the configure process unless specified otherwise. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-54) Version 4.6.3 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 11.9-0 Version 12.5-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 12.1 (Build 20110811) Version 12.1 (Build 20120212) Linux 2.6.18-308.16.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 64-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.6.3 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 11.9-0 Version 12.5-0 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 12.1 (Build 20110811) Version 12.1 (Build 20120212) Linux 2.6.32-358.2.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 12.1 20120212 Linux 2.6.32-358.2.1.el6.ppc64 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3) IBM XL C/C++ V11.1 IBM XL Fortran V13.1 SunOS 5.11 32- and 64-bit Sun C 5.12 SunOS_sparc (emu) Sun Fortran 95 8.6 SunOS_sparc Sun C++ 5.12 SunOS_sparc Windows 7 Visual Studio 2008 w/ Intel Fortran 11 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Visual Studio 2012 w/ Intel Fortran 13 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Visual Studio 2012 w/ Intel Fortran 13 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 64-bit gfortran GNU Fortran (GCC) 4.6.2 (fred) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1 Build 20120928 Mac OS X Lion 10.7.3 Apple clang/clang++ version 3.0 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.6.2 (duck) Intel icc/icpc/ifort version 13.0 Mac OS X Mountain Lion 10.8.1 Apple clang/clang++ version 4.2 from Xcode 4.6.1 64-bit gfortran GNU Fortran (GCC) 4.6.2 (wren) Intel icc/icpc/ifort version 13.0.1.119 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.11 32-bit n y/y n y y y Solaris2.11 64-bit n y/n n y y y Windows 7 y y/y n y y y Windows 7 x64 y y/y n y y y Windows 7 Cygwin n y/n n y y y Windows 7 x64 Cygwin n y/n n y y y Mac OS X Snow Leopard 10.6.8 64-bit n y/y n y y y Mac OS X Lion 10.7.3 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.1 64-bit n y/y n y y y AIX 5.3 32- and 64-bit n y/n n y y y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 GNU y y/y y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 5.9 Linux 2.6.18 x86_64 PGI n y/y n y y y CentOS 6.4 Linux 2.6.32 x86_64 GNU n y/n n y y y CentOS 6.4 Linux 2.6.32 x86_64 Intel n y/y n y y y Linux 2.6.32-358.2.1.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.11 32-bit y y y y Solaris2.11 64-bit y y y y Windows 7 y y y y Windows 7 x64 y y y y Windows 7 Cygwin n n n y Windows 7 x64 Cygwin n n n y Mac OS X Snow Leopard 10.6.8 64-bit y n y n Mac OS X Lion 10.7.3 64-bit y n y y Mac OS X Mountain Lion 10.8.1 64-bit y n y y AIX 5.3 32- and 64-bit y n n y CentOS 5.9 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.9 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.9 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.9 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.9 Linux 2.6.18 x86_64 Intel y y y n CentOS 5.9 Linux 2.6.18 x86_64 PGI y y y n CentOS 6.4 Linux 2.6.32 x86_64 GNU y y y n CentOS 6.4 Linux 2.6.32 x86_64 Intel y y y n Linux 2.6.32-358.2.1.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.18-308.13.1.el5PAE MPICH mpich2-1.4.1p1 compiled with #1 SMP i686 i686 i386 gcc 4.1.2 and gfortran 4.1.2 (jam) g95 (GCC 4.0.3 (g95 0.94!) Linux 2.6.18-308.16.1.el5 MPICH mpich2-1.4.1p1 compiled with #1 SMP x86_64 GNU/Linux gcc 4.1.2 and gfortran 4.1.2 (koala) g95 (GCC 4.0.3 (g95 0.94!) FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 Debian6.0.7 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 (cmake and autotools) Fedora18 3.7.9-205.fc18.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8) GNU Fortran (GCC) 4.7.2 20120507 (Red Hat 4.7.2-8) (cmake and autotools) SUSE 12.3 3.7.10-1.1-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.7.2 GNU Fortran (SUSE Linux) 4.7.2 (cmake and autotools) Ubuntu 12.10 3.5.0-25-generic #39-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2 GNU Fortran (Ubuntu/Linaro 4.7.2-2ubuntu1) 4.7.2 (cmake and autotools) Cray Linux Environment (CLE) PrgEnv-pgi/4.0.46 hopper.nersc.gov pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai Known Problems ============== * When building using the Cray compilers on Cray machines, HDF5 configure mistakenly thinks the compiler is an intel compiler and sets the -std=c99 flag which breaks configure on Cray. To build HDF5 properly on a Cray machine, please consult with the instructions in INSTALL_parallel for building on Hopper. (MSC - 2013/04/26 - HDFFV-8429) * The h5dump and h5diff utilities occasionally produce different output between Linux and Windows systems. This is caused by lower-level library routines that fail to write fill values to the user's buffer when reading unallocated chunks from datasets that have a fill value set to H5D_FILL_VALUE_DEFAULT. Due to platform differences the return of spurious data values has only been encountered on Windows 32-bit systems. (Issue HDFFV-8247; JP - 2013/03/27) * The 5.9 C++ compiler on Sun failed to compile a C++ test ttypes.cpp. It complains with this message: "/home/hdf5/src/H5Vprivate.h", line 130: Error: __func__ is not defined. The reason is that __func__ is a predefined identifier in C99 standard. The HDF5 C library uses it in H5private.h. The test ttypes.cpp includes H5private.h (H5Tpkg.h<-H5Fprivate.h<-H5Vprivate.h<-H5private.h). Sun's 5.9 C++ compiler doesn't support __func__, thus fails to compile the C++ test. But Sun's 5.11 C++ compiler does. To check whether your Sun C++ compiler knows this identifier, try to compile the following simple C++ program: #include int main(void) { printf("%s\n", __func__); return 0; } (SLU - 2012/11/5) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it's a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernel) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernal (3.2.2 on Fedora) doesn't have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) This issue is no longer present on Ubuntu 12.10 (3.5.0 kernel) with gcc 4.7.2. * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. (SLU - 2010/05/05 - HDFFV-1264) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.10-patch1%%%% HDF5 version 1.8.10-patch1 released on 2013-01-22 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.9 and HDF5 1.8.10, and contains information on the platforms tested and known problems in HDF5-1.8.10. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.10 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.10 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.10 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.10 (current release) versus Release 1.8.9": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.10 - Bug Fixes since HDF5-1.8.9 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - A new tool, cmakehdf5, which is a build command script similar to buildhdf5 is added and is available in the bin directory. (AKC - 2013/01/21) Library ------- - Updated to latest autotools and changed all hard *.sh scripts to configure managed *.sh.in files. Removed overloading of autotools TESTS variable by examples and tests. Renamed configure.in to configure.ac. (ADB - 2012/08/23 - HDFFV-8129) - The data sieve buffer size was set for all the datasets in the file. It could waste memory if any dataset size is smaller than the sieve buffer size. Now the library picks the smaller one between the dataset size and the sieve buffer size from the file access property. See Issue 7934. (SLU - 2012/4/11) Parallel Library ---------------- - Added the H5Pget_mpio_no_collective_cause() function that retrieves reasons why the collective I/O was broken during read/write IO access. (JKM - 2012/08/30 HDFFV-8143) - Added H5Pget_mpio_actual_io_mode_f (MSB - 2012/09/27) Tools ----- - h5import: Changed to allow the use of h5dump output as input files to h5import. h5dump must include the "-p" option to print the properties; configuration file is captured output of h5dump. The restrictions are that only one dataset with a simple datatype (integer, floating-point, or string) can be processed. Integers and floating-point imports from h5dump must use the "binary" option for the data file. The string version uses the h5dump "-y --width=1" options to disable the indexing printouts, print single columns, and obviously NOT use the "binary" option. (ADB - 2012/07/19 HDFFV-721) High-Level APIs --------------- - None Fortran API ----------- - Fixed a typo in return value of the nh5dread_f_c function (was 1 instead of 0 on success); fixed the return value to make it consistent with other Fortran functions; cleaned debug statements from the code. (EIP - 2012/06/23) C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.10 =========================== Library ------- - The library now behaves correctly when performing large I/O operations on Mac OS-X. Previously, single I/O operations > 2 GB would fail since the Darwin read/write calls cannot handle the number of bytes that their parameter types imply. Fixes HDFFV-7975 and HDFFV-8240 (DER - 07 JAN 2013) - Fixed a bug in the core VFD that cause failures when opening files > 2 GB. Fixes HDFFV-8124 and HDFFV-8158 (DER - 07 JAN 2013) Tools ----- - The following h5stat test case failed in BG/P machines (and potentially other machines that display extra output if an MPI task returns with a non-zero code.) Testing h5stat notexist.h5 The test script was fixed to ignore the extra output. HDFFV-8233 (AKC - 2012/12/17) - h5diff: Fixed slowness when comparing HDF5 files with many attributes. Much slower performance was identified with later release version (from 1.8.7 to 1.8.10) compared to 1.8.6. The issue was introduced from fixing an attribute related bug for 1.8.7 release in the past. HDFFV-8145 (JKM 2012/12/13) Testing ------- - None Bug Fixes since HDF5-1.8.9 ========================== Configuration ------------- - Fixed configure --enable-production to not use -O optimization for Lion and Mountain Lion systems when gcc (i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1) is used. Somehow the -O optimization will cause some of the hard conversion code in test/dt_arith.c to fail. HDFFV-8017. (AKC - 2012/10/10) - Fixed AIX Fortran compiler flags to use appropriate settings for debugging, profiling, and optimization situations. HDFFV-8069. (AKC 2012/09/27) Library ------- - Fixed a memory leak exposed when inserting/removing a property from a property list several times. HDFFV-8022. (MSC 2012/05/18) - The file_image test will fail in the "initial file image and callbacks in the core VFD" sub-test if the source directory is read-only as the test fails to create its test files in the build directory. This has been fixed. HDFFV-8009 (AKC - 2012/07/06) Parallel Library ---------------- - The MPI-POSIX VFD was updated to include the POSIX and Windows correctness features added that had already been added to the other VFDs. HDFFV-8058/7845. (DER 2012/09/17) Performance ------------- - Removed program perform/benchpar from the enable-build-all list. The program will be retired or moved to another location. HDFFV-8156 (AKC 2012/10/01) - Retired program perform/mpi-perf. Its purpose has been incorporated into h5perf. (AKC 2012/09/21) Tools ----- - h5repack: "h5repack -f NONE file1.h5 out.h5" command failed if source file contains chunked dataset and a chunk dim is bigger than the dataset dim. Another issue is that the command changed max dims if chunk dim is smaller than the dataset dim. These issue occurred when dataset size is smaller than 64k (compact size limit) Fixed both. HDFFV-8012 (JKM 2012/09/24) - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no longer add together the differences between datasets and the differences between attributes of those datasets. This change makes the output of verbose mode consistent for datasets, groups, and committed datatypes. HDFFV-5919 (JKM 2012/09/10) - h5diff: Fixed the incorrect result when comparing attribute data values and the data type has the same class but different sizes. HDFFV-7942 (JKM 2012/08/15) - h5dump: Replaced single element fwrite with block writes. HDFFV-1208 (ADB 2012/08/13) - h5diff: Fixed test failure for "make check" due to failure of copying test files when performed in HDF5 source tree. Also applied to other tools. HDFFV-8107 (JKM 2012/08/01) - ph5diff: Fixed intermittent hang issue on a certain operation in parallel mode. It was detected by daily test for comparing non-comparable objects, but it could have occurred in other operations depending on machine condition. HDFFV-8003 (JKM 2012/08/01) - h5diff: Fixed the function COPY_TESTFILES_TO_TESTDIR() of testh5diff.sh to better report when there is an error in the file copying. HDFFV-8105 (AKC 2012/07/22) - h5dump: Fixed the sort by name display to maintain correct parent/child relationships between ascending/descending order. HDFFV-8095 (ADB 2012/07/12) - h5dump: Fixed the display by creation order when using option -n (print contents). HDFFV-5942 (ADB 2012/07/09) - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output. Used technique similar to what was done in h5ls (matches library options). HDFFV-7999 (ADB 2012/05/23) - h5diff: Fixed the tool so that it will not check and display the status of dangling links without setting the --follow-symlinks option. This also improved performance when comparing lots of external links without the --follow-symlinks option. HDFFV-7998 (JKM 2012/04/26) F90 API ------- - Fixed a typo in return value of the nh5dread_f_c function (was 1 instead of 0 on success); fixed the return value to make it consistent with other Fortran functions; cleaned debug statements from the code. (EIP - 2012/06/23) - Fixed a problem writing/reading control characters to a dataset; writing a string containing alerts, backspace, carriage_return, form_feed, horizontal_tab, vertical_tab, or new_line is now tested and working. (MSB - 2012/09/01) - Corrected the integer type of H5S_UNLIMITED_F to HSIZE_T (MSB - 2012/09/01) - Corrected the number of continuation lines in the src files to be less than 32 lines for F95 compliance. (MSB - 2012/10/01) C++ API ------ - None High-Level APIs: ------ - Fixed problem with H5TBdelete_record destroying all data following the deletion of a row. (MSB- 2012/7/26) - Fixed H5LTget_attribute_string not closing an object identifier when an error occurs. (MSB- 2012/7/21) - Corrected the return type of H5TBAget_fill from herr_t to htri_t to reflect that a return value of 1 indicates that a fill value is present, 0 indicates a fill value is not present, and <0 indicates an error. Fortran High-Level APIs: ------ - None Supported Platforms =================== AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.6.3 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 11.9-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 12.1 MPICH mpich2-1.4.1p1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-308.16.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 32-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.6.3 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 11.9-0 Version 12.5-0 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 12.1 (Build 20110811) Version 12.1 (Build 20120212) MPICH mpich2-1.4.1p1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.6 20110731 (ostrich) GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) Linux 2.6.32-220.23.1.1chaos Intel C, C++, Fortran Compilers ch5.x86_64 GNU/Linux Version 12.1.5.339 (LLNL Aztec) IBM Blue Gene/P XL C for Blue Gene/P, bgxlc V9.0 (LLNL uDawn) XL C++ for Blue Gene/P, bgxlC V9.0 XL Fortran for Blue Gene/P, bgxlf90 V11.1 SunOS 5.10 32- and 64-bit Sun C 5.9 Sun OS_sparc Patch 124867-16 (linew) Sun Fortran 95 8.3 Sun OS_sparc Patch 127000-13 Sun C++ 5.9 Sun OS_sparc Patch 124863-26 Sun C 5.11 SunOS_sparc Sun Fortran 95 8.5 SunOS_sparc Sun C++ 5.11 SunOS_sparc Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 (fred) gfortran GNU Fortran (GCC) 4.6.2 Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Intel 32-bit gfortran GNU Fortran (GCC) 4.6.1 (tejeda) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Lion 10.7.3 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 4.2.1 32- and 64-bit g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 4.2.1 (duck) gfortran GNU Fortran (GCC) 4.6.2 Mac OS X Mountain Lion 10.8.1 cc Apple clang version 4.0 from Xcode 4.5.1 (owl) c++ Apple clang version 4.0 from Xcode 4.5.1 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 4.5.1 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 4.5.1 gfortran GNU Fortran (GCC) 4.6.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.10 32-bit n y/y n y y y Solaris2.10 64-bit n y/n n y y y Windows 7 y y/n n y y y Windows 7 x64 y y/n n y y y Mac OS X Snow Leopard 10.6.8 32-bit n y/y n y y n Mac OS X Snow Leopard 10.6.8 64-bit n y/y n y y y Mac OS X Lion 10.7.3 32-bit n y/y n y y n Mac OS X Lion 10.7.3 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.1 64-bit n y/n n y y n AIX 5.3 32- and 64-bit y y/n y y y y CentOS 5.5 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.5 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.5 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.5 Linux 2.6.18 x86_64 GNU y y/y y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 5.5 Linux 2.6.18 x86_64 PGI n y/y n y y y Linux 2.6.32-220.7.1.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit n n n n Windows 7 y y y y Windows 7 x64 y y y y Mac OS X Snow Leopard 10.6.8 32-bit y n y n Mac OS X Snow Leopard 10.6.8 64-bit y n y n Mac OS X Lion 10.7.3 32-bit y n y y Mac OS X Lion 10.7.3 64-bit y n y y Mac OS X Mountain Lion 10.8.1 64-bit y n y y AIX 5.3 32- and 64-bit n n n y CentOS 5.5 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.5 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.5 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.5 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel y y y n CentOS 5.5 Linux 2.6.18 x86_64 PGI y y y n Linux 2.6.32-220.7.1.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 Debian6.0.3 2.6.32-5-686 #1 SMP i686 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 (cmake and autotools) Debian6.0.3 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 (cmake and autotools) Fedora17 3.5.2-1.fc17.i6866 #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) GNU Fortran (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) (cmake and autotools) Fedora17 3.5.2-1.fc17.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) GNU Fortran (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) (cmake and autotools) SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.7.1 GNU Fortran (SUSE Linux) 4.7.1 (cmake and autotools) SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.7.1 GNU Fortran (SUSE Linux) 4.7.1 (cmake and autotools) Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 (cmake and autotools) Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 (cmake and autotools) (Use optimization level -O1) Cray Linux Environment (CLE) PrgEnv-pgi/4.0.46 hopper.nersc.gov pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai Known Problems ============== * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it's a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernal (3.2.2 on Fedora) doesn't have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. (SLU - 2010/05/05 - HDFFV-1264) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.10%%%% HDF5 version 1.8.10 released on 2012-10-26 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.9 and HDF5 1.8.10, and contains information on the platforms tested and known problems in HDF5-1.8.10. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.10 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.10 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.10 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.10 (current release) versus Release 1.8.9": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.9 - Supported Platforms - Supported Configuration Features Summary - More Tested Platforms - Known Problems New Features ============ Configuration ------------- - None Library ------- - Updated to latest autotools and changed all hard *.sh scripts to configure managed *.sh.in files. Removed overloading of autotools TESTS variable by examples and tests. Renamed configure.in to configure.ac. (ADB - 2012/08/23 - HDFFV-8129) - The data sieve buffer size was set for all the datasets in the file. It could waste memory if any dataset size is smaller than the sieve buffer size. Now the library picks the smaller one between the dataset size and the sieve buffer size from the file access property. See Issue 7934. (SLU - 2012/4/11) Parallel Library ---------------- - Added the H5Pget_mpio_no_collective_cause() function that retrieves reasons why the collective I/O was broken during read/write IO access. (JKM - 2012/08/30 HDFFV-8143) - Added H5Pget_mpio_actual_io_mode_f (MSB - 2012/09/27) Tools ----- - h5import: Changed to allow the use of h5dump output as input files to h5import. h5dump must include the "-p" option to print the properties; configuration file is captured output of h5dump. The restrictions are that only one dataset with a simple datatype (integer, floating-point, or string) can be processed. Integers and floating-point imports from h5dump must use the "binary" option for the data file. The string version uses the h5dump "-y --width=1" options to disable the indexing printouts, print single columns, and obviously NOT use the "binary" option. (ADB - 2012/07/19 HDFFV-721) High-Level APIs --------------- - None Fortran API ----------- - Fixed a typo in return value of the nh5dread_f_c function (was 1 instead of 0 on success); fixed the return value to make it consistent with other Fortran functions; cleaned debug statements from the code. (EIP - 2012/06/23) C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.9 ========================== Configuration ------------- - Fixed configure --enable-production to not use -O optimization for Lion and Mountain Lion systems when gcc (i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1) is used. Somehow the -O optimization will cause some of the hard conversion code in test/dt_arith.c to fail. HDFFV-8017. (AKC - 2012/10/10) - Fixed AIX Fortran compiler flags to use appropriate settings for debugging, profiling, and optimization situations. HDFFV-8069. (AKC 2012/09/27) Library ------- - Fixed a memory leak exposed when inserting/removing a property from a property list several times. HDFFV-8022. (MSC 2012/05/18) - The file_image test will fail in the "initial file image and callbacks in the core VFD" sub-test if the source directory is read-only as the test fails to create its test files in the build directory. This has been fixed. HDFFV-8009 (AKC - 2012/07/06) Parallel Library ---------------- - The MPI-POSIX VFD was updated to include the POSIX and Windows correctness features added that had already been added to the other VFDs. HDFFV-8058/7845. (DER 2012/09/17) Performance ------------- - Removed program perform/benchpar from the enable-build-all list. The program will be retired or moved to another location. HDFFV-8156 (AKC 2012/10/01) - Retired program perform/mpi-perf. Its purpose has been incorporated into h5perf. (AKC 2012/09/21) Tools ----- - h5repack: "h5repack -f NONE file1.h5 out.h5" command failed if source file contains chunked dataset and a chunk dim is bigger than the dataset dim. Another issue is that the command changed max dims if chunk dim is smaller than the dataset dim. These issue occurred when dataset size is smaller than 64k (compact size limit) Fixed both. HDFFV-8012 (JKM 2012/09/24) - h5diff: Fixed the counter in verbose mode (-v, -r) so that it will no longer add together the differences between datasets and the differences between attributes of those datasets. This change makes the output of verbose mode consistent for datasets, groups, and committed datatypes. HDFFV-5919 (JKM 2012/09/10) - h5diff: Fixed the incorrect result when comparing attribute data values and the data type has the same class but different sizes. HDFFV-7942 (JKM 2012/08/15) - h5dump: Replaced single element fwrite with block writes. HDFFV-1208 (ADB 2012/08/13) - h5diff: Fixed test failure for "make check" due to failure of copying test files when performed in HDF5 source tree. Also applied to other tools. HDFFV-8107 (JKM 2012/08/01) - ph5diff: Fixed intermittent hang issue on a certain operation in parallel mode. It was detected by daily test for comparing non-comparable objects, but it could have occurred in other operations depending on machine condition. HDFFV-8003 (JKM 2012/08/01) - h5diff: Fixed the function COPY_TESTFILES_TO_TESTDIR() of testh5diff.sh to better report when there is an error in the file copying. HDFFV-8105 (AKC 2012/07/22) - h5dump: Fixed the sort by name display to maintain correct parent/child relationships between ascending/descending order. HDFFV-8095 (ADB 2012/07/12) - h5dump: Fixed the display by creation order when using option -n (print contents). HDFFV-5942 (ADB 2012/07/09) - h5dump: Changed to allow H5T_CSET_UTF8 to be displayed in h5dump output. Used technique similar to what was done in h5ls (matches library options). HDFFV-7999 (ADB 2012/05/23) - h5diff: Fixed the tool so that it will not check and display the status of dangling links without setting the --follow-symlinks option. This also improved performance when comparing lots of external links without the --follow-symlinks option. HDFFV-7998 (JKM 2012/04/26) F90 API ------- - Fixed a typo in return value of the nh5dread_f_c function (was 1 instead of 0 on success); fixed the return value to make it consistent with other Fortran functions; cleaned debug statements from the code. (EIP - 2012/06/23) - Fixed a problem writing/reading control characters to a dataset; writing a string containing alerts, backspace, carriage_return, form_feed, horizontal_tab, vertical_tab, or new_line is now tested and working. (MSB - 2012/09/01) - Corrected the integer type of H5S_UNLIMITED_F to HSIZE_T (MSB - 2012/09/01) - Corrected the number of continuation lines in the src files to be less than 32 lines for F95 compliance. (MSB - 2012/10/01) C++ API ------ - None High-Level APIs: ------ - Fixed problem with H5TBdelete_record destroying all data following the deletion of a row. (MSB- 2012/7/26) - Fixed H5LTget_attribute_string not closing an object identifier when an error occurs. (MSB- 2012/7/21) - Corrected the return type of H5TBAget_fill from herr_t to htri_t to reflect that a return value of 1 indicates that a fill value is present, 0 indicates a fill value is not present, and <0 indicates an error. Fortran High-Level APIs: ------ - None Supported Platforms =================== AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 Linux 2.6.18-308.13.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.6.3 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 11.9-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 12.1 MPICH mpich2-1.4.1p1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-308.16.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 32-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.6.3 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 11.9-0 Version 12.5-0 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 12.1 (Build 20110811) Version 12.1 (Build 20120212) MPICH mpich2-1.4.1p1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.6 20110731 (ostrich) GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) Linux 2.6.32-220.23.1.1chaos Intel C, C++, Fortran Compilers ch5.x86_64 GNU/Linux Version 12.1.5.339 (LLNL Aztec) IBM Blue Gene/P XL C for Blue Gene/P, bgxlc V9.0 (LLNL uDawn) XL C++ for Blue Gene/P, bgxlC V9.0 XL Fortran for Blue Gene/P, bgxlf90 V11.1 SunOS 5.10 32- and 64-bit Sun C 5.9 Sun OS_sparc Patch 124867-16 (linew) Sun Fortran 95 8.3 Sun OS_sparc Patch 127000-13 Sun C++ 5.9 Sun OS_sparc Patch 124863-26 Sun C 5.11 SunOS_sparc Sun Fortran 95 8.5 SunOS_sparc Sun C++ 5.11 SunOS_sparc Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(CYGWIN_NT-6.1 1.7.15(0.260/5/3) gcc(4.5.3) compiler and gfortran) (cmake and autotools) Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 (fred) gfortran GNU Fortran (GCC) 4.6.2 Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Snow Leopard 10.6.8 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Darwin Kernel Version 10.8.0 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 3.2.6 Intel 32-bit gfortran GNU Fortran (GCC) 4.6.1 (tejeda) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Lion 10.7.3 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 4.2.1 32- and 64-bit g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 4.2.1 (duck) gfortran GNU Fortran (GCC) 4.6.2 Mac OS X Mountain Lion 10.8.1 cc Apple clang version 4.0 from Xcode 4.5.1 (owl) c++ Apple clang version 4.0 from Xcode 4.5.1 gcc i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 from Xcode 4.5.1 g++ i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 from Xcode 4.5.1 gfortran GNU Fortran (GCC) 4.6.2 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.10 32-bit n y/y n y y y Solaris2.10 64-bit n y/n n y y y Windows 7 y y/n n y y y Windows 7 x64 y y/n n y y y Mac OS X Snow Leopard 10.6.8 32-bit n y/y n y y n Mac OS X Snow Leopard 10.6.8 64-bit n y/y n y y y Mac OS X Lion 10.7.3 32-bit n y/y n y y n Mac OS X Lion 10.7.3 64-bit n y/y n y y y Mac OS X Mountain Lion 10.8.1 64-bit n y/n n y y n AIX 5.3 32- and 64-bit y y/n y y y y CentOS 5.5 Linux 2.6.18-308 i686 GNU y y/y y y y y CentOS 5.5 Linux 2.6.18-308 i686 Intel n y/y n y y y CentOS 5.5 Linux 2.6.18-308 i686 PGI n y/y n y y y CentOS 5.5 Linux 2.6.18 x86_64 GNU y y/y y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel n y/y n y y y CentOS 5.5 Linux 2.6.18 x86_64 PGI n y/y n y y y Linux 2.6.32-220.7.1.el6.ppc64 n y/n n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit n n n n Windows 7 y y y y Windows 7 x64 y y y y Mac OS X Snow Leopard 10.6.8 32-bit y n y n Mac OS X Snow Leopard 10.6.8 64-bit y n y n Mac OS X Lion 10.7.3 32-bit y n y y Mac OS X Lion 10.7.3 64-bit y n y y Mac OS X Mountain Lion 10.8.1 64-bit y n y y AIX 5.3 32- and 64-bit n n n y CentOS 5.5 Linux 2.6.18-308 i686 GNU y y y y CentOS 5.5 Linux 2.6.18-308 i686 Intel y y y n CentOS 5.5 Linux 2.6.18-308 i686 PGI y y y n CentOS 5.5 Linux 2.6.18 x86_64 GNU y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel y y y n CentOS 5.5 Linux 2.6.18 x86_64 PGI y y y n Linux 2.6.32-220.7.1.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 Debian6.0.3 2.6.32-5-686 #1 SMP i686 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 (cmake and autotools) Debian6.0.3 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 (cmake and autotools) Fedora17 3.5.2-1.fc17.i6866 #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) GNU Fortran (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) (cmake and autotools) Fedora17 3.5.2-1.fc17.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) GNU Fortran (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) (cmake and autotools) SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.7.1 GNU Fortran (SUSE Linux) 4.7.1 (cmake and autotools) SUSE 12.2 3.4.6-2.10-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.7.1 GNU Fortran (SUSE Linux) 4.7.1 (cmake and autotools) Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 (cmake and autotools) Ubuntu 12.04 3.2.0-29-generic #46-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 GNU Fortran (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 (cmake and autotools) (Use optimization level -O1) Cray Linux Environment (CLE) PrgEnv-pgi/4.0.46 hopper.nersc.gov pgcc 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgf90 12.5-0 64-bit target on x86-64 Linux -tp shanghai pgCC 12.5-0 64-bit target on x86-64 Linux -tp shanghai Known Problems ============== * The following h5stat test case fails in BG/P machines (and potentially other machines that display extra output if an MPI task returns with a non-zero code.) Testing h5stat notexist.h5 The test actually runs and passes as expected. It is the extra output from the MPI process that causes the test script to fail. This will be fixed in the next release. (AKC - 2012/10/25 - HDFFV-8233) * The C++ and FORTRAN bindings are not currently working on FreeBSD with the native release 8.2 compilers (4.2.1), but are working with gcc 4.6 from the ports (and probably gcc releases after that). (QAK - 2012/10/19) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it's a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernal (3.2.2 on Fedora) doesn't have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14 - HDFFV-8235) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. (SLU - 2010/05/05 - HDFFV-1264) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) %%%%1.8.9%%%% HDF5 version 1.8.9 released on 2012-05-09 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.8 and HDF5 1.8.9. It also contains information on the platforms tested and known problems in HDF5-1.8.9. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.9 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.9 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.9 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.9 (current release) versus Release 1.8.8": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.8 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - None Library ------- - Added new feature to merge committed datatypes when copying objects, using new H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG, modified by new API routines: H5Padd_merge_committed_dtype_path(), H5Pfree_merge_committed_dtype_paths(), H5Pset_mcdt_search_cb() and H5Pget_mcdt_search_cb(). (QAK - 2012/03/30) - Added new feature which allows working with files in memory in the same ways files are worked with on disk. New API routines include H5Pset_file_image, H5Pget_file_image, H5Pset_file_image_callbacks, H5Pget_file_image_callbacks, H5Fget_file_image, and H5LTopen_file_image. (QAK - 2012/04/17) Parallel Library ---------------- - Corrected memory allocation error in MPI datatype construction code. (QAK - 2012/04/23) - Add two new routines to set/get the atomicity parameter in the MPI library to perform atomic operations. Some file systems (for example PVFS2) do not support atomic updates, so those routines would not be supported. (MSC - 2012/03/27 - HDFFV-7961) Tools ----- - h5repack: Added ability to set the metadata block size of the output file, with the '-M'/'--metadata_block_size' command line parameter. (QAK - 2012/03/30) - h5stat: Added ability to display a summary of the file space usage for a file, with the '-S'/'--summary' command line parameter. (QAK - 2012/03/28) - h5dump: Added capability for "-a" option to show attributes containing "/" by using an escape character. For example, for a dataset "/dset" containing attribute "speed(m/h)", use "h5dump -a "/dset/speed(\/h)" to show the content of the attribute. (PC - 2012/03/12 - HDFFV-7523) - h5dump: Added ability to apply command options across multiple files using a wildcard in the filename. Unix example; "h5dump -H -d Dataset1 tarr*.h5". Cross platform example; "h5dump -H -d Dataset1 tarray1.h5 tarray2.h5 tarray3.h5". (ADB - 2012/03/12 - HDFFV-7876). - h5dump: Added new option --no-compact-subset. This option will not interpret the '[' character as starting the compact form of subsetting. This is useful when the "h5dump error: unable to open dataset "datset_name"" message is output because a dataset name contains a '[' character. (ADB - 2012/03/05 - HDFFV-7689). - h5repack: Improved performance for big chunked datasets (size > 128MB) when used with the layout (-l) or compression (-f) options. Before this change, repacking datasets with chunks with a large first dimension would take extremely long. For example, repacking a dataset with chunk dimensions of 1024x5x1 might take many hours to process while changing a dataset with chunk dimensions set to 1x5x1024 might take under an hour. After this change, processing the dataset with chunk dimensions of 1024x5x1 takes about 15 minutes, and processing a dataset with chunk dimensions of 1x5x1024 takes about 14 minutes. (JKM - 2012/03/01 - HDFFV-7862) High-Level APIs --------------- - New API: H5LTpath_valid (Fortran: h5ltpath_valid_f) checks if a path is correct, determines if a link resolves to a valid object, and checks that the link does not dangle. (MSB - 2012/03/15) Fortran API ----------- - Added for the C API the Fortran wrapper: h5ocopy_f (MSB - 2012/03/22) C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.8 ========================== Configuration ------------- - Fixed Makefile issue in which "-Wl," was not properly specified prior to -rpath when building parallel Fortran libraries with an Intel compiler. (MAM - 2012/03/26) - Makefiles generated by other packages using h5cc as the compiler no longer error when 'make' is invoked more than once in order to 'rebuild' after changes to source. (MAM - 2012/03/26) - Added code to display the version information of XL Fortran and C++ in the summary of configure. (AKC - 2012/02/28 - HDFFV-7793) - Updated all CMakeLists.txt files to indicate the minimum CMake version is the current standard of 2.8.6 (ADB - 2011/12/05 - HDFFV-7854) Library ------- - Windows and STDIO correctness changes have been propagated from the SEC2 and old Windows drivers to the STDIO VFD. (DER - 2012/03/30 - HDFFV-7917) - Fixed an error that would occur when copying an object with attribute creation order tracked and indexed. (NAF - 2012/03/28 - HDFFV-7762) - Fixed a bug in H5Ocopy(): When copying an opened object, call the object's flush class action to ensure that cached data is flushed so that H5Ocopy will get the correct data. (VC - 2012/03/27 - HDFFV-7853) - The istore test will now skip the sparse 50x50x50 test when the VFD does not support sparse files on that platform. The most important platforms on which this will be skipped are Windows (NTFS sparse files are not supported) and Mac OS-X (HFS sparse files are not supported). This fixes CTest timeout issues on Windows. (DER - 2012/03/27 - HDFFV-7769) - Windows and POSIX correctness changes have been propagated from the SEC2 VFD to the Core VFD. This mainly affects file operations on the driver's backing store and fixes a problem on Windows where large files could not be read. (DER - 2012/03/27 - HDFFV-7916 - HDFFV-7603) - When an application tries to write or read many small data chunks and runs out of memory, the library had a segmentation fault. The fix is to return the error stack with proper information. (SLU - 2012/03/23 - HDFFV-7785) - H5Pset_data_transform had a segmentation fault in some cases like x*-100. It works correctly now and handles other cases like 100-x or 2/x. (SLU - 2012/03/15 - HDFFV-7922) - Fixed rare corruption bugs that could occur when using the new object header format. (NAF - 2012/03/15 - HDFFV-7879) - Fixed an error that occurred when creating a contiguous dataset with a zero-sized dataspace and space allocation time set to 'early'. (QAK - 2012/03/12) - Changed Windows thread creation to use _beginthread() instead of CreateThread(). Threads created by the latter can be killed in low-memory situations. (DER - 2012/02/10 - HDFFV-7780) - Creating a dataset in a read-only file caused a segmentation fault when the file is closed. It's fixed. The attempt to create a dataset will fail with an error indicating the file is read-only. (SLU - 2012/01/25 - HDFFV-7756) - Fixed a segmentation fault that could occur when shrinking a dataset with chunks larger than 1 MB. (NAF - 2011/11/30 - HDFFV-7833) - Fixed a bug that could cause H5Oget_info to return the wrong address after copying a committed (named) datatype. (NAF - 2011/11/14) - The library allowed the conversion of strings between ASCII and UTF8 We have corrected it to report an error under this situation. (SLU - 2011/11/8 - HDFFV-7582) - Fixed a segmentation fault when the library tried to shrink the size of a compound datatype through H5Tset_size immediately after the datatype was created. (SLU - 2011/11/4 - HDFFV-7618) Parallel Library ---------------- - None Tools ----- - h5unjam: Fixed a segmentation fault that occurred when h5unjam was used with the -V (show version) option. (JKM - 2012/04/19 - HDFFV-8001) - h5repack: Fixed a failure that occurred when repacking the chunk size of a specified chunked dataset with unlimited max dims. (JKM - 2012/04/11 - HDFFV-7993) - h5diff: Fixed a failure when comparing groups. Before the fix, if an object in a group was compared with an object in another group where both had the same name but the object type was different, then h5diff would fail. After the fix, h5diff detects such cases as non-comparable and displays appropriate error messages. (JKM - 2012/03/28 - HDFFV-7644) - h5diff: If unique objects exist only in one file and if h5diff is set to exclude the unique objects with the --exclude-path option, then h5diff might miss excluding some objects. This was fixed to correctly exclude objects. (JKM - 2012/03/20 - HDFFV-7837) - h5diff: When two symbolic dangling links are compared with the --follow-symlinks option, the result should be the same. This worked when comparing two files, but didn't work when comparing two objects. h5diff now works when comparing two objects. (JKM - 2012/03/09 - HDFFV-7835) - h5dump: Added the tools library error stack to properly catch error information generated within the library. (ADB - 2012/03/12 - HDFFV-7958) - h5dump: Changed the process where an open link used to fail. Now dangling links no longer throw error messages. (ADB - 2012/03/12 - HDFFV-7839) - h5dump: Refactored code to remove duplicated functions. Split XML functions from DDL functions. Corrected indentation and formatting errors. Also fixed subsetting counting overflow (HDFFV-5874). Verified all tools call tools_init() in main. The USER_BLOCK data now correctly displays within the SUPER_BLOCK info. NOTE: WHITESPACE IN THE OUTPUT HAS CHANGED. (ADB - 2012/02/17 - HDFFV-7560) - h5diff: Fixed to prevent from displaying error stack message when comparing two dangling symbolic links with the follow-symlinks option. (JKM - 2012/01/13 - HDFFV-7836) - h5repack: Fixed a memory leak that occurred with the handling of variable length strings in attributes. (JKM - 2012/01/10 - HDFFV-7840) - h5ls: Fixed a segmentation fault that occurred when accessing region reference data in an attribute. (JKM - 2012/01/06 - HDFFV-7838) F90 API ------- - None C++ API ------ - None High-Level APIs: ------ - None Fortran High-Level APIs: ------ - h5ltget_attribute_string_f: The h5ltget_attribute_string_f used to return the C NULL character in the returned character buffer. The returned charactor buffer now does not return the C NULL character; the buffer is blank-padded if needed. (MSB - 2012/03/23) Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 Linux 2.6.18-194.3.1.el5PAE GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP i686 i686 i386 compilers for 32-bit applications; (jam) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.5.2 PGI C, Fortran, C++ Compilers for 32-bit applications; Version 11.8-0 Version 11.9-0 Intel(R) C, C++, Fortran Compiler for 32-bit applications; Version 12.0 Version 12.1 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-308.1.1.el5 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers for 32-bit applications; (koala) Version 4.1.2 20080704 (Red Hat 4.1.2-52) Version 4.5.2 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 11.9-0 (64-bit) Version 11.8-0 (32-bit) Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64; Version 12.0 Version 12.1 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.32-220.7.1.el6.ppc64 gcc (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.6 20110731 (ostrich) GNU Fortran (GCC) 4.4.6 20110731 (Red Hat 4.4.6-3) Linux 2.6.18-108chaos Intel C, C++, Fortran Compilers Version 11.1 #1 SMP x86_64 GNU/Linux (LLNL Aztec) IBM Blue Gene/P XL C for Blue Gene/P, bgxlc V9.0 (LLNL uDawn) XL C++ for Blue Gene/P, bgxlC V9.0 XL Fortran for Blue Gene/P, bgxlf0 V11.1 SunOS 5.10 32- and 64-bit Sun C 5.9 Sun OS_sparc Patch 124867-16 (linew) Sun Fortran 95 8.3 Sun OS_sparc Patch 127000-13 Sun C++ 5.9 Sun OS_sparc Patch 124863-26 Sun C 5.11 SunOS_sparc Sun Fortran 95 8.5 SunOS_sparc Sun C++ 5.11 SunOS_sparc SGI Altix UV Intel(R) C, Fortran Compilers SGI ProPack 7 Linux Version 11.1 20100806 2.6.32.24-0.2.1.2230.2.PTF- SGI MPT 2.02 default #1 SMP (NCSA ember) Dell NVIDIA Cluster Intel(R) C, Fortran Compilers Red Hat Enterprise Linux 6 Version 12.0.4 20110427 2.6.32-131.4.1.el6.x86_64 mvapich2 1.7rc1-intel-12.0.4 (NCSA forge) Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(1.7.9 native gcc(4.5.3) compiler and gfortran) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 w/ Intel Fortran 12 (cmake) Cygwin(1.7.9 native gcc(4.5.3) compiler and gfortran) Mac OS X Snow Leopard 10.6.8 i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (gcc) Darwin Kernel Version 10.8.0 i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 (g++) Intel 64-bit (Apple Inc. build 5666) (dot 3) (fred) GNU Fortan (GCC) 4.6.1 (gfortran) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Snow Leopard 10.6.8 i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (gcc) Darwin Kernel Version 10.8.0 i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 (g++) Intel 32-bit (Apple Inc. build 5666) (dot 3) (tejeda) GNU Fortran (GCC) 4.6.1 (gfortran) Intel C (icc), Fortran (ifort), C++ (icpc) 12.1.0.038 Build 20110811 Mac OS X Lion 10.7.3 GCC 4.2.1 gcc 32- and 64-bit GNU Fortran (GCC) 4.6.1 gfortran (duck) GCC 4.2.1. g++ Debian6.0.3 2.6.32-5-686 #1 SMP i686 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Debian6.0.3 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Fedora16 3.2.9-2.fc16.i6866 #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) GNU Fortran (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) Fedora16 3.2.9-2.fc16.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) GNU Fortran (GCC) 4.6.2 20111027 (Red Hat 4.6.2-1) SUSE 12.1 3.1.9-1.4-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.6.2 GNU Fortran (SUSE Linux) 4.6.2 SUSE 12.1 3.1.9-1.4-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.6.2 GNU Fortran (SUSE Linux) 4.6.2 Ubuntu 11.10 3.0.0-16-generic #29-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 GNU Fortran (Ubuntu/Linaro 4.6.4-9ubuntu3) 4.6.1 Ubuntu 11.10 3.0.0-16-generic #29-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 GNU Fortran (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 Cray Linux Environment (CLE) PrgEnv-pgi 2.2.74 hopper.nersc.gov pgcc 11.9-0 64-bit target on x86-64 Linux -tp k8e pgf90 11.9-0 64-bit target on x86-64 Linux -tp k8e pgCC 11.9-0 64-bit target on x86-64 Linux -tp k8e Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n y y y Windows XP x64 n y(4) n y y y Windows Vista n y(4) n y y y Windows Vista x64 n y(4) n y y y Mac OS X Snow Leopard 10.6.8 32-bit n y n y y n Mac OS X Snow Leopard 10.6.8 64-bit n y n y y y Mac OS X Lion 10.7.3 32-bit n y n y y n Mac OS X Lion 10.7.3 64-bit n y n y y y AIX 5.3 32- and 64-bit y y y y y y FreeBSD 8.2-STABLE 32&64 bit n x n x y y CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W y y(2) y y y y CentOS 5.5 Linux 2.6.18-194 i686 Intel W n y n y y y CentOS 5.5 Linux 2.6.18-194 i686 PGI W n y n y y y CentOS 5.5 Linux 2.6.18 x86_64 GNU (1) W y y(3) y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel W n y n y y y CentOS 5.5 Linux 2.6.18 x86_64 PGI W n y n y y y Linux 2.6.32-220.7.1.el6.ppc64 n y n y y y SGI ProPack 7 Linux 2.6.32.24 y y y y y y Red Hat Enterprise Linux 6 y y y y y y CLE hopper.nersc.gov y y(3) y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit n n n n Windows XP y y(4) y n Windows XP x64 y y(4) y n Windows Vista y y(4) y y Windows Vista x64 y y(4) y y Mac OS X Snow Leopard 10.6.8 32-bit y n y n Mac OS X Snow Leopard 10.6.8 64-bit y n y n Mac OS X Lion 10.7.3 32-bit y n y y Mac OS X Lion 10.7.3 64-bit y n y y AIX 5.3 32- and 64-bit n n n y FreeBSD 8.2-STABLE 32&64 bit y x x y CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W y y(2) y y CentOS 5.5 Linux 2.6.18-194 i686 Intel W y y y n CentOS 5.5 Linux 2.6.18-194 i686 PGI W y y y n CentOS 5.5 Linux 2.6.18 x86_64 GNU (1) W y y y y CentOS 5.5 Linux 2.6.18 x86_64 Intel W y y y n CentOS 5.5 Linux 2.6.18 x86_64 PGI W y y y n Linux 2.6.32-220.7.1.el6.ppc64 y y y n SGI ProPack 7 Linux 2.6.32.24 y y y n Red Hat Enterprise Linux 6 y y y n CLE hopper.nersc.gov n n n n (1) Fortran compiled with gfortran. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2008 w/ Intel Fortran 10.1 (Cygwin shared libraries are not supported) (5) C and C++ shared libraries will not be built when Fortran is enabled. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * The h5repacktst test fails on AIX 32-bit because the test uses more memory than the default amount. The failure message typically looks like: "time: 0551-010 The process was stopped abnormally. Try again." This is an issue with the test only and does not represent a problem with the library. To allow the test to pass, request more memory when testing via appropriate command such as: $ env LDR_CNRTL=MAXDATA=0x20000000@DSA make check (AKC - 2012/05/09 - HDFFV-8016) * The file_image test will fail in the "initial file image and callbacks in the core VFD" sub-test if the source directory is read-only as the test fails to create its test files in the build directory. This will be resolved in a future release. (AKC - 2012/05/05 - HDFFV-8009) * The dt_arith test reports several errors involving "long double" on Mac OS X 10.7 Lion when any level of optimization is enabled. The test does not fail in debug mode. This will be addressed in a future release. (SLU - 2012/05/08) * The following h5dump test case fails in BG/P machines (and potentially other machines that use a command script to launch executables): h5dump --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 This is due to the embedded spaces in the dataset name being interpreted by the command script launcher as meta-characters, thus passing three arguments to h5dump's -d flag. The command passes if run by hand, just not via the test script. (AKC - 2012/05/03) * The ph5diff (parallel h5diff) tool can intermittently hang in parallel mode when comparing two HDF5 files that contain objects with the same names but with different object types. (JKM - 2012/04/27) * On hopper, the build failed when RUNSERIAL and RUNPARALLEL are set to aprun -np X, because the H5lib_settings.c file was not generated properly. Not setting those environment variables works, because configure was able to automatically detect that it's a Cray system and used the proper launch commands when necessary. (MSC - 2012/04/18) * The data conversion test dt_arith.c fails in "long double" to integer conversion on Ubuntu 11.10 (3.0.0.13 kernal) with GCC 4.6.1 if the library is built with optimization -O3 or -O2. The older GCC (4.5) or newer kernal (3.2.2 on Fedora) doesn't have the problem. Users should lower the optimization level (-O1 or -O0) by defining CFLAGS in the command line of "configure" like: CFLAGS=-O1 ./configure This will overwrite the library's default optimization level. (SLU - 2012/02/07 - HDFFV-7829) * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release. (DER - 2011/10/14) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in a future release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. (SLU - 2010/05/05 - HDFFV-1264) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * MinGW has a missing libstdc++.dll.a library file and will not successfully link C++ applications/tests. Do not use the enable-cxx configure option. Read all of the INSTALL_MINGW.txt file for all restrictions. (ADB - 2009/11/11) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not exist. This is due to the MPI_File_open() call failing if the mode has the MPI_MODE_EXCL bit set. (AKC - 2009/08/11 - HDFFV-988) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== (AKC - 2008/11/10) * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect to see this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. (AKC - 2008/05/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. (AKC - 2004/12/08) %%%%1.8.8%%%% HDF5 version 1.8.8 released on 2011-11-15 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.7 and HDF5 1.8.8, and contains information on the platforms tested and known problems in HDF5-1.8.8. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.8 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.8 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.8 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.8 (current release) versus Release 1.8.7": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.7 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - Added the --enable-fortran2003 flag to enable Fortran2003 support in the HDF5 Fortran library. The flag should be used along with the --enable-fortran flag and takes affect only when the Fortran compiler is Fortran2003 compliant. (EIP - 2011/11/14) - Added checks for clock_gettime and mach/mach_time.h to both configure and CMake. This will support the move from gettimeofday to clock_gettime's monotonic timer in the profiling code in a future release. (DER - 2011/10/12) Library ------- - The Windows VFD code has been removed with the exception of the functions which set it (H5Pset_fapl_windows, for example). Setting the Windows VFD now really sets the SEC2 VFD. The WINDOWS_MAX_BUF and WINDOWS_USE_STDIO configuration options and #defines have also been removed. NOTE: Since the Windows VFD was a clone of the SEC2 VFD, this change should be transparent to users. (DER - 2011/10/12 - HDFFV-7740, HDFFV-7744) - H5Tcreate now supports the string type (fixed-length and variable- length). (SLU - 2011/05/20) Parallel Library ---------------- - Added new H5Pget_mpio_actual_chunk_opt_mode and H5Pget_mpio_actual_io_mode API routines for querying whether/how a collective I/O operation completed. (QAK - 2011/10/12) Tools ----- - None High-Level APIs --------------- - Added the following Fortran wrappers for the Dimension Scale APIs: h5dsset_scale_f h5dsattach_scale_f h5dsdetach_scale_f h5dsis_attached_f h5dsis_scale_f h5dsset_label_f h5dsget_label_f h5dsget_scale_name_f h5dsget_num_scales_f (EIP for SB - 2011/10/13 - HDFFV-3797) Fortran API ----------- - The HDF5 Fortran library was enhanced to support the Fortran 2003 standard. The following features are available when the HDF5 library is configured using the --enable-fortran and --enable-fortran2003 configure flags AND if the Fortran compiler is Fortran 2003 compliant: - Subroutines overloaded with the C_PTR derived type: h5pget_f h5pget_fill_value_f h5pinsert_f h5pregister_f h5pset_f h5pset_fill_value_f h5rcreate_f h5rderefrence_f h5rget_name_f h5rget_obj_type_f - Subroutines overloaded with the C_PTR derived type and simplified signatures: h5aread_f h5awrite_f h5dread_f h5dwrite_f - New subroutines h5dvlen_reclaim_f h5literate_by_name_f h5literate_f h5ovisit_f h5tconvert_f h5pset_nbit_f h5pset_scaleoffset_f - Subroutines with additional optional parameters: h5pcreate_class_f (EIP - 2011/10/14) C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - None Bug Fixes since HDF5-1.8.7 ========================== Configuration ------------- - Changed the size of H5_SIZEOF_OFF_T to 4 bytes (was 8) in the VMS h5pubconf.h based on the output of a test program. (DER - 2011/10/12) - The Windows and VMS versions of H5pubconf.h were brought into sync with the linux/posix version. (DER - 2011/10/12) - Fixed a bug in the bin/trace Perl script where API functions that take a variable number of arguments were not processed for trace statement fixup. (DER - 2011/08/25) - The --enable-h5dump-packed-bits configure option has been removed. The h5dump code that this option conditionally enabled is now always compiled into h5dump. Please refer to the h5dump reference manual for usage of the packed bits feature. (MAM - 2011/06/23 - HDFFV-7592) - Configure now uses the same flags and symbols in its tests that are used to build the library. (DER - 2011/05/24) Library ------- - Corrected the error when copying attributes between files which are using different versions of the file format. (QAK - 2011/10/20 - HDFFV-7718) - Corrected the error when loading local heaps from the file, which could cause the size of the local heap's data block to increase dramatically. (QAK - 2011/10/14 - HDFFV-7767) - An application does not need to do H5O_move_msgs_forward() when writing attributes. Tests were checked into the performance suite. (VC - 2011/10/13 - HDFFV-7640) - Fixed a bug that occurred when using H5Ocopy on a committed datatype containing an attribute using that committed datatype. (NAF - 2011/10/13 - HDFFV-5854) - Added generic VFD I/O types to the SEC2 and log VFDs to ensure correct I/O sizes (and remove compiler warnings) between Windows and true POSIX systems. (DER - 2011/10/12) - Corrected some Windows behavior in the SEC2 and log VFDs. This mainly involved datatype correctness fixes, Windows API call error checks, and adding the volume serial number to the VFD cmp functions. (DER - 2011/10/12) - Converted post-checks for the appropriate POSIX I/O sizes to pre-checks in order to avoid platform-specific or undefined behavior. (DER - 2011/10/12) - #ifdef _WIN32 instances have been changed to #ifdef H5_HAVE_WIN32_API. H5_HAVE_VISUAL_STUDIO checks have been added where necessary. This is in CMake only as configure never sets _WIN32. (ADB - 2011/09/12) - CLANG compiler with the options -fcatch-undefined-behavior and -ftrapv discovered 3 problems in tests and tools' library: 1. In dsets.c, left shifting an unsigned int for 32 bits or more caused undefined behavior. 2. In dt_arith.c, the INIT_INTEGER macro definition has an overflow when the value is a negative minimal and is being subtracted from one. 3. In tools/lib/h5tools_str.c, right shifting an int value for 32 bits or more caused undefined behavior. All the problems have been corrected. (SLU - 2011/09/02 - HDFFV-7674) - H5Epush2() now has the correct trace functionality (this is related to the bin/trace Perl script bug noted in the configure section). (DER - 2011/08/25) - Corrected mismatched function name typo of h5pget_dxpl_mpio_c and h5pfill_value_defined_c. (AKC - 2011/08/22 - HDFFV-7641) - Corrected an internal error in the library where objects that use committed (named) datatypes and were accessed from two different file IDs could confuse the two and cause erroneous failures. (QAK - 2011/07/18 - HDFFV-7638) - In v1.6 of the library, there was an EOA for the whole MULTI file saved in the super block. We took it out in v1.8 of the library because it's meaningless for the MULTI file. v1.8 of the library saves the EOA for the metadata file instead, but this caused a backward compatibility problem. A v1.8 library couldn't open the file created with the v1.6 library. We fixed the problem by checking the EOA value to detect the file created with v1.6 library. (SLU - 2011/06/22) - When a dataset had filters and reading data failed, the error message didn't say which filter wasn't registered. It's fixed now. (SLU - 2011/06/03) Parallel Library ---------------- - The Special Collective IO (IO when some processes do not contribute to the IO) and the Complex Derived Datatype MPI functionalities are no longer conditionally enabled in the library by configure. They are always enabled in order to take advantage of performance boosts from these behaviors. Older MPI implementations that do not allow for these functionalities can no longer by used by HDF5. (MAM - 2011/07/08 - HDFFV-7639). Tools ----- - h5diff: fixed segfault over non-comparable attribute with different dimention or rank, along with '-c' option to display details. (JKM - 2011/10/24 - HDFFV-7770) - Fixed h5diff to display all the comparable objects and attributes regardless of detecting non-comparables. (JKM - 2011/09/16 - HDFFV-7693) - Fixed h5repack to update the values of references(object and region) of attributes in h5repack for 1) references, 2) arrays of references, 3) variable-length references, and 4) compound references. (PC - 2011/09/14 - HDFFV-5932) - h5diff: fixed a segfault over a dataset with container types array and variable-length (vlen) along with multiple nested compound types. Example: compound->array->compound, compound->vlen->compound. (JKM - 2011/09/01 - HDFFV-7712) - h5repack: added macro to handle a failure in H5Dread/write when memory allocation failed inside the library. (PC - 2011/08/19) - Fixed h5jam to not to allow the specifying of an HDF5 formatted file as an input file for the -u (user block file) option. The original HDF5 file would not be accessible if this behavior was allowed. (JKM - 2011/08/19 - HDFFV-5941) - Revised the command help pages of h5jam and h5unjam. The descriptions were not up to date and some were missing. (JKM - 2011/08/15 - HDFFV-7515) - Fixed h5dump to correct the schema location: (ADB - 2011/08/10) - h5repack: h5repack failed to copy a dataset if the layout is changed from chunked with unlimited dimensions to contiguous. (PC - 2011/07/15 - HDFFV-7649) - Fixed h5diff: the "--delta" option considers two NaN of the same type are different. This is wrong based on the h5diff description in the Reference Manual. (PC - 2011/07/15 - HDFFV-7656) - Fixed h5diff to display an instructive error message and exit with an instructive error message when mutually exclusive options (-d, -p and --use-system-epsilon) are used together. (JKM - 2011/07/07 - HDFFV-7600) - Fixed h5dump so that it displays the first line of each element in correct position for multiple dimention array types. Before this fix, the first line of each element in an array was displayed after the last line of previous element without moving to the next line (+indentation). (JKM - 2011/06/15 - HDFFV-5878) - Fixed h5dump so that it will display the correct value for H5T_STD_I8LE datasets on the Blue-gene system (ppc64, linux, Big-Endian, clustering). (AKC & JKM - 2011/05/12 - HDFFV-7594) - Fixed h5diff to compare a file to itself correctly. Previously h5diff reported either the files were different or not compatible in certain cases even when comparing a file to itself. This fix also improves performance when comparing the same target objects through verifying the object and file addresses before comparing the details in the objects. Examples of details are datasets and attributes. (XCAO & JKM - 2011/05/06 - HDFFV-5928) F90 API ------- - Modified the h5open_f and h5close_f subroutines to not to call H5open and H5close correspondingly. While the H5open call just adds overhead, the H5close call called by a Fortran application shuts down the HDF5 library. This makes the library inaccessible to the application. (EIP & SB - 2011/10/13 - HDFFV-915) - Fixed h5tget_tag_f where the length of the C string was used to repack the C string into the Fortran string. This lead to memory corruption in the calling program. (SB - 2011/07/26) - Added defined constants: H5T_ORDER_MIXED_F (HDFFV-2767) H5Z_SO_FLOAT_DSCALE_F H5Z_SO_FLOAT_ESCALE_F H5Z_SO_INT_F H5Z_SO_INT_MINBITS_DEFAULT_F H5O_TYPE_UNKNOWN_F H5O_TYPE_GROUP_F H5O_TYPE_DATASET_F H5O_TYPE_NAMED_DATATYPE_F H5O_TYPE_NTYPES_F C++ API ------ - None High-Level APIs: ------ - Fixed the H5LTdtype_to_text function. It had some memory problems when dealing with some complicated data types. (SLU - 2011/10/19 - HDFFV-7701) - Fixed H5DSset_label seg faulting when retrieving the length of a dimension label that was not set. (SB - 2011/08/07 - HDFFV-7673) - Fixed a dimension scale bug where if you create a dimscale, attach two datasets to it, and then unattach them, you get an error if they are unattached in order, but no error if you unattach them in reverse order. (SB - 2011/06/07 - HDFFV-7605) Fortran High-Level APIs: ------ - None Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 10.1.0.5 (NASA G-ADA) xlC 10.1.0.5 xlf90 12.1.0.6 FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 IBM Blue Gene/P bgxlc 9.0.0.9 (LLNL uDawn) bgxlf90 11.1.0.7 bgxlC 9.0.0.9 Linux 2.6.16.60-0.54.5-smp Intel(R) C, C++, Fortran Compilers x86_64 Version 11.1 20090630 (INL Icestorm) Linux 2.6.18-194.el5 x86_64 Intel(R) C, C++, Fortran Compilers (INL Fission) Version 12.0.2 20110112 Linux 2.6.18-108chaos x86_64 Intel(R) C, C++, Fortran Compilers (LLNL Aztec) Version 11.1 20090630 Linux 2.6.18-194.3.1.el5PAE gcc (GCC) 4.1.2 and 4.4.2 #1 SMP i686 i686 i386 GNU Fortran (GCC) 4.1.2 20080704 (jam) (Red Hat 4.1.2-48) and 4.4.2 PGI C, Fortran, C++ 10.4-0 32-bit PGI C, Fortran, C++ 10.6-0 32-bit Intel(R) C Compiler for 32-bit applications, Version 11.1 Intel(R) C++ Compiler for 32-bit applications, Version 11.1 Intel(R) Fortran Compiler for 32-bit applications, Version 11.1 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-238.12.1.el5 gcc 4.1.2 and 4.4.2 #1 SMP x86_64 GNU/Linux GNU Fortran (GCC) 4.1.2 20080704 (koala) (Red Hat 4.1.2-46) and 4.4.2 tested for both 32- and 64-bit binaries Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Version 11.1. PGI C, Fortran, C++ Version 9.0-4 for 64-bit target on x86-64 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 SGI Altix UV Intel(R) C, Fortran Compilers SGI ProPack 7 Linux Version 11.1 20100806 2.6.32.24-0.2.1.2230.2.PTF- SGI MPT 2.02 default #1 SMP (NCSA ember) Dell NVIDIA Cluster Intel(R) C, Fortran Compilers Red Hat Enterprise Linux 6 Version 12.0.4 20110427 2.6.32-131.4.1.el6.x86_64 mvapich2 1.7rc1-intel-12.0.4 (NCSA forge) SunOS 5.10 32- and 64-bit Sun C 5.11 SunOS_sparc 2010/08/13 Sun Fortran 95 8.5 SunOS_sparc 2010/08/13 Sun C++ 5.11 SunOS_sparc 2010/08/13 Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.9 native gcc(4.5.3) compiler and gfortran) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.9 native gcc(4.5.3) compiler and gfortran) Windows Vista Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows Vista x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Mac OS X 10.8.0 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) Darwin Kernel Version 10.8.0 GNU Fortran (GCC) 4.6.1 Intel C, C++ and Fortran compilers 12.1.0 Mac OS X 10.8.0 (Intel 32-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) Darwin Kernel Version 10.8.0 GNU Fortran (GCC) version 4.6.1 Intel C, C++ and Fortran compilers 12.1.0 Fedora 12 2.6.32.16-150.fc12.ppc64 #1 SMP ppc64 GNU/Linux gcc (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) GNU Fortran (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) Debian6.0.3 2.6.32-5-686 #1 SMP i686 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Debian6.0.3 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Fedora15 2.6.40.6-0.fc15.i686.PAE #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.6.1 20110908 (Red Hat 4.6.1-9) GNU Fortran (GCC) 4.6.1 20110908 (Red Hat 4.6.1-9) Fedora15 2.6.40.6-0.fc15.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.6.1 20110908 (Red Hat 4.6.1-9) GNU Fortran (GCC) 4.6.1 20110908 (Red Hat 4.6.1-9) SUSE 11.4 2.6.37.6-0.7-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.5.1 20101208 GNU Fortran (SUSE Linux) 4.5.1 20101208 SUSE 11.4 2.6.37.6-0.7-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.5.1 20101208 GNU Fortran (SUSE Linux) 4.5.1 20101208 Ubuntu 11.10 3.0.0-12-generic #20-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 GNU Fortran (Ubuntu/Linaro 4.6.4-9ubuntu3) 4.6.1 Ubuntu 11.10 3.0.0-12-generic #20-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 GNU Fortran (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 OpenVMS Alpha 8.3 HP C V7.3-009 HP Fortran V8.2-104679-48H9K HP C++ V7.3-009 Cray Linux Environment (CLE) PrgEnv-pgi 2.2.74 hopper.nersc.gov pgcc 11.7-0 64-bit target on x86-64 Linux -tp k8e franklin.nersc.gov pgf90 11.7-0 64-bit target on x86-64 Linux -tp k8e pgCC 11.7-0 64-bit target on x86-64 Linux -tp k8e Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n y y y Windows XP x64 n y(4) n y y y Windows Vista n y(4) n y y y Windows Vista x64 n y(4) n y y y OpenVMS Alpha n y n y y n Mac OS X 10.8 Intel 32-bit n y n y y y Mac OS X 10.8 Intel 64-bit n y n y y y AIX 5.3 32- and 64-bit n y n y y y FreeBSD 8.2-STABLE 32&64 bit n x n x y y CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W y y(2) y y y y CentOS 5.5 Linux 2.6.18-194 i686 Intel W n y n y y n CentOS 5.5 Linux 2.6.18-194 i686 PGI W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y(3) y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W n y n y y y Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 n y n y y y SGI ProPack 7 Linux 2.6.32.24 y y y y y y Red Hat Enterprise Linux 6 y y y y y y CLE hopper.nersc.gov y y(3) y y y n CLE franklin.nersc.gov y y(3) y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y Windows XP y y(4) y n Windows XP x64 y y(4) y n Windows Vista y y(4) y y Windows Vista x64 y y(4) y y OpenVMS Alpha n n n n Mac OS X 10.8 Intel 32-bit y(5) n y n Mac OS X 10.8 Intel 64-bit y(5) n y n AIX 5.3 32- and 64-bit n n n y FreeBSD 8.2-STABLE 32&64 bit y x x y CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W y y(2) y y CentOS 5.5 Linux 2.6.18-128 i686 Intel W y y y n CentOS 5.5 Linux 2.6.18-128 i686 PGI W y y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W y y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W y y y n Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 y y y y SGI ProPack 7 Linux 2.6.32.24 y y y n Red Hat Enterprise Linux 6 y y y n CLE hopper.nersc.gov n n n n CLE franklin.nersc.gov n n n n (1) Fortran compiled with gfortran. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2008 w/ Intel Fortran 10.1 (Cygwin shared libraries are not supported) (5) C and C++ shared libraries will not be built when Fortran is enabled. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * The STDIO VFD does not work on some architectures, possibly due to 32/64 bit or large file issues. The basic STDIO VFD test is known to fail on 64-bit SunOS 5.10 on SPARC when built with -m64 and 32-bit OS X/Darwin 10.7.0. The STDIO VFD test has been disabled while we investigate and a fix should appear in a future release, possibly 1.8.9. (DER - 2011/10/14) * h5diff can report inconsistent results when comparing datasets of enum type that contain invalid values. This is due to how enum types are handled in the library and will be addressed in the next release. (DER - 2011/10/14 - HDFFV-7527) * The links test can fail under the stdio VFD due to some issues with external links. This will be investigated and fixed in a future release. (DER - 2011/10/14 - HDFFV-7768) * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 - HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. (AKC - 2011/03/10) * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ (NAF - 2011/01/19) * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. (SLU - 2010/05/05 - HDFFV-1264) * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. (SLU - 2010/02/02) * MinGW has a missing libstdc++.dll.a library file and will not successfully link C++ applications/tests. Do not use the enable-cxx configure option. Read all of the INSTALL_MINGW.txt file for all restrictions. (ADB - 2009/11/11) * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. (MAM - 2009/11/04) * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not exist. This is due to the MPI_File_open() call failing if the mode has the MPI_MODE_EXCL bit set. (AKC - 2009/08/11 - HDFFV-988) * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. (CMC - 2009/04/28) * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== (AKC - 2008/11/10) * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect to see this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. (AKC - 2008/05/28) * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. (SLU - 2005/06/30) * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. (AKC - 2004/12/08) %%%%1.8.7%%%% HDF5 version 1.8.7 released on Tue May 10 09:24:44 CDT 2011 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.6 and HDF5 1.8.7, and contains information on the platforms tested and known problems in HDF5-1.8.7. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.7 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.7 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.7 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.7 (current release) versus Release 1.8.6": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.6 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - Configure now generates Makefiles that build in "silent make mode" by default in which compile and link lines are significantly simplified for clarity. To override this and view actual compile and link lines during building, the --disable-silent-rules flag can be used at configure time, or the 'make' command can be followed by V=1, to indicate a "verbose" make. (MAM - 2011/4/14). - Added mpicc and mpif90 as the default C and Fortran compilers for Linux systems when --enable-parallel is specified but no $CC or $FC is defined. (AKC - 2011/2/7) - Added a new configure option, "--enable-unsupported", which can be used to stop configure from preventing the use of unsupported configure option combinations, such as c++ in parallel or Fortran with threadsafe. Use at your own risk, as it may result in a library that won't compile or run as expected! (MAM - 2010/11/17 - Bug 2061) Library ------- - The library allows the dimension size of a dataspace to be zero. In the past, the library would allow this only if the maximal dimension size was unlimited. Now there is no such restriction, but no data can be written to this kind of dataset. (SLU - 2011/4/20) - We added two new macros, H5_VERSION_GE and H5_VERSION_LE, to let users compare certain version numbers with the library being used. (SLU - 2011/4/20) - Added ability to cache files opened through external links. Added new public functions H5Pset_elink_file_cache_size(), H5Pget_elink_file_cache_size(), and H5Fclear_elink_file_cache(). (NAF - 2011/02/17) - Finished implementing all options for 'log' VFD. (QAK - 2011/1/25) - Removed all old code for Metrowerks compilers, bracketed by __MWERKS__). Metrowerks compiler is long gone. (AKC - 2010/11/17) Parallel Library ---------------- - None Tools ----- - h5diff: Added new "verbose with levels" option, '-vN, --verbose=N'. The old '-v, --verbose' option is deprecated but remains available; it is exactly equivalent to '-v0, --verbose=0'. The new levels 1 ('-v1' or '--verbose=1') and 2 ('-v2' or '--verbose=2') can be specified to view more information regarding attributes differences. Bug #2121 (JKM 2011/3/23) - h5dump: Added new option --enable-error-stack. This option will display error stack information in the output stream. This is useful when the "h5dump: Unable to print data" message is output. (ADB - 2011/03/03) High-Level APIs --------------- - Fortran LT make datasets routines (H5LTmake_dataset_f, h5ltmake_dataset_int_f, h5ltmake_dataset_float_f, h5ltmake_dataset_double_f) and LT read datasets routines (h5ltread_dataset_f,h5ltread_dataset_int_f, h5ltread_dataset_float_f, 5ltread_dataset_double_f) can now handle 4-dimensional to 7-dimensional rank datasets. HDFFV-1217 (MSB-2011/4/24/2011) F90 API ------- - None C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - Intel V11.1 uses now -O3 optimization in production mode (EIP - 2010/10/08) Bug Fixes since HDF5-1.8.6 ========================== Configuration ------------- - Shared C++ and HL libraries on AIX should now be working correctly. Note that Fortran shared libraries are still not working on AIX. (See the Known Problems section, below). (MAM - 2011/4/20) - Removed config/ibm-aix6.x. All IBM-AIX settings are in one file, ibm-aix. (AKC - 2011/4/14) - Shared C libraries are no longer disabled on Mac when Fortran is enabled. Shared Fortran libraries are still not supported on Mac, so configure will disable them by default, but this is overrideable with the new --enable-unsupported configure option. The configure summary has been updated to reflect the fact that the shared-ness of the C++/Fortran wrapper libraries may not align with the C library. (MAM - 2011/04/11 - HDFFV-4353). Library ------- - Changed assertion failure when decoding a compound datatype with no fields into a normal error failure. Also prohibit using this sort of datatype for creating an attribute (as is already the case for datasets and committed (named) datatypes). (QAK - 2011/04/15, Jira issue #HDFFV-2766) - Tell the VFL flush call that the file will be closing, allowing the VFDs to avoid sync'ing the file (particularly valuable in parallel). (QAK - 2011/03/09) - The datatype handler created with H5Tencode/decode used to have the reference count 0 (zero); it now has the reference count 1 (one). (SLU - 2011/2/18) - Fixed the definition of H5_HAVE_GETTIMEOFDAY on Windows so that HDgettimeofday() is defined and works properly. Bug HDFFV-5931 (DER - 2011/04/14) - Added basic VFD tests for the Windows, STDIO and log VFD tests. (DER - 2011/04/11) Parallel Library ---------------- - None Tools ----- - Updated h5dump test case script to prevent entire test failure when source directory is read-only. Bug #HDFFV-4342 (JKM 2011/4/12) - Fixed h5dump displaying incorrect values for H5T_STD_I8BE type data in attribute on Big-Endian machine. H5T_STD_I8BE is unsigned 8bit type, so h5dump is supposed to display -2 instead of 254. It worked correctly on Little-Endian system , but not on Big-Endian system. Bug #HDFFV-4358 (JKM 04/08/2011) - Updated some HDF5 tools to standardize the option name as '--enable-error-stack' for printing HDF5 error stack messages. h5ls and h5dump have been updated. For h5ls, this replaces "-e/--errors" option, which is deprecated. For h5dump, this is a new option. Bug #2182 (JKM 2011/3/30) - Fixed the h5diff --use-system-epsilon option. The formula used in the calculation was changed from ( |a - b| / b ) to ( |a - b| ). This was done to improve performance. Bug #2184 (JKM 2011/3/24) - Fixed output for H5T_REFERENCE in h5dump. According to the BNF document the output of a H5T_REFERENCE should be followed by the type; ::= H5T_REFERENCE { } ::= H5T_STD_REF_OBJECT | H5T_STD_REF_DSETREG Previously this was only displayed if the -R option was used. Bug #1725 (ADB 2011/3/28) - Fixed two h5diff issues. 1) h5diff compared attributes correctly only when two objects had the same number of attributes and the attribute names were identical. 2) h5diff did not display useful information about attribute differences. Bug #2121 (JKM 2011/3/17) - Fixed a memory leak in h5diff that occurred when accessing symbolic links with the --follow-symlink option. Bug #2214 (JKM 2011/3/18) - Fixed a memory leak in h5diff that occurred when accessing variable length string data. Bug #2216 (JKM 2011/3/18) - Fixed and improved the help page for h5ls -a, --address option. Bug #1904 (JKM 2011/3/11) - Fixed h5copy to enable copying an object into the same HDF5 file. Previously h5copy displayed an error message when the target file was the same as the source file. (XCAO 2011/3/8) - Fixed an h5dump problem that caused the tool to skip some data elements in large datasets with a large array datatype on Windows. This issue arose only on Windows due to the different return behavior of the _vsnprintf() function. Bug #2161 (JKM 2011/3/3) - Fixed h5dump which was skipping some array indices in large datasets with a relatively large array datatype. The interval of skipped indices varied according to the size of the array. Bug #2092 (JKM 2011/2/15) - Fixed h5diff which was segfaulting when comparing compound datasets with a combination of fixed-length string datatypes and variable-length string datatypes in certain orders. Bug #2089 (JKM 2010/12/28) - Improved h5diff performance. 1) Now use HDmemcmp() before comparing two elements. 2) Replace expensive H5Tequals() calls. 3) Retrieve datatype information at dataset level, not at each element level for compound datasets. HDFFV-7516 (JKM 2011/4/18) - Fixed h5ls to display nested compound types with curly brackets when -S (--simple) option is used with -l (--label), so it shows which members (in curly brackets) belong to which nested compound type, making the output clearer. Bug #1979 (JKM 2010/11/09) - Fixed h5diff to handle variable-length strings in a compound dataset and variable-length string arrays in a compound dataset correctly. Garbage values were previously displayed when h5diff compared multiple variable-length strings in a compound type dataset. Bug #1989 (JKM 2010/10/28) - Fixed h5copy to fail gracefully when copying an object to a non- existing group without the -p option. Bug #2040 (JKM 2010/10/18) F90 API ------ - None C++ API ------ - None High-Level APIs: ------ - None Fortran High-Level APIs: ------ - h5tbmake_table_f: Fixed error in passing an array of characters with different length field names. - h5tget_field_info_f: Fixed error with packing the C strings into a Fortran array of strings. Added optional argument called 'maxlen_out' which returns the maximum string character length in a field name element. Bug HDFFV-1255 (MSB- 4/17/2011) Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 6.1 xlc 11.1.0.3 (NCSA BP) xlC 11.1.0.3 xlf90 13.1.0.3 mpcc_r 11.1.0.3 mpxlf90_r 13.1.0.3 FreeBSD 8.2-STABLE i386 gcc 4.2.1 [FreeBSD] 20070719 (loyalty) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 FreeBSD 8.2-STABLE amd64 gcc 4.2.1 [FreeBSD] 20070719 (freedom) g++ 4.2.1 [FreeBSD] 20070719 gcc 4.6.1 20110422 g++ 4.6.1 20110422 gfortran 4.6.1 20110422 Linux 2.6.18-194.3.1.el5PAE gcc (GCC) 4.1.2 and 4.4.2 #1 SMP i686 i686 i386 G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) (jam) GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48) and 4.4.2 PGI C, Fortran, C++ 10.4-0 32-bit PGI C, Fortran, C++ 10.6-0 32-bit Intel(R) C Compiler for 32-bit applications, Version 11.1 Intel(R) C++ Compiler for 32-bit applications, Version 11.1 Intel(R) Fortran Compiler for 32-bit applications, Version 11.1 Absoft 32-bit Fortran 95 10.0.7 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-194.17.1.el5 gcc 4.1.2 and 4.4.2 #1 SMP x86_64 GNU/Linux G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) (amani) tested for both 32- and 64-bit binaries GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-46) and 4.4.2 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Version 11.1. PGI C, Fortran, C++ Version 9.0-4 for 64-bit target on x86-64 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 SGI ProPack 7 Linux Intel(R) C++ Version 11.1 20100806 2.6.32.24-0.2.1.2230.2.PTF- Intel(R) Fortran Version 11.1 20100806 default #1 SMP SGI MPT 2.01 SGI Altix UV (NCSA ember) SunOS 5.10 32- and 64-bit Sun C 5.9 Sun OS_sparc Patch 124867-16 (linew) Sun Fortran 95 8.3 Sun OS_sparc Patch 127000-13 Sun C++ 5.9 Sun OS_sparc Patch 124863-26 Sun C 5.10 SunOS_sparc Patch 141861-07 Sun Fortran 95 8.4 SunOS_sparc Patch 128231-06 Sun C++ 5.10 SunOS_sparc 128228-11 Intel Xeon Linux 2.6.18- gcc 4.2.4 92.1.10.el5_lustre.1.6.6smp- Intel(R) C++ Version 10.1.017 perfctr #8 SMP Intel(R) Fortran Compiler Version 10.1.017 (NCSA abe) Open MPI 1.3.2 MVAPICH2-1.5.1_pgi-10.8 Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.7 native gcc(4.3.4) compiler and gfortran) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.7 native gcc(4.3.4) compiler and gfortran) Windows Vista Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows Vista x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Mac OS X 10.7.0 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 Darwin Kernel Version 10.7.0 GNU Fortran (GCC) 4.6.0 20101106 (experimental) Intel C, C++ and Fortran compilers 12.0.1.122 20101110 Mac OS X 10.7.0 (Intel 32-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3) Darwin Kernel Version 10.7.0 GNU Fortran (GCC) version 4.4.0 20090123 (experimental) [trunk revision 143587] Fedora 12 2.6.32.16-150.fc12.ppc64 #1 SMP ppc64 GNU/Linux gcc (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) GNU Fortran (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) Debian6.01 2.6.32-5-686 #1 SMP i686 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Debian6.01 2.6.32-5-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.4.5-8) 4.4.5 GNU Fortran (Debian 4.4.5-8) 4.4.5 Fedora14 2.6.35.12-88.fc14.i686.PAE #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) GNU Fortran (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) Fedora14 2.6.35.12-88.fc14.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) GNU Fortran (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) SUSE 11.4 2.6.37.1-1.2-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.5.1 20101208 GNU Fortran (SUSE Linux) 4.5.1 20101208 SUSE 11.4 2.6.37.1-1.2-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.5.1 20101208 GNU Fortran (SUSE Linux) 4.5.1 20101208 Ubuntu 10.10 2.6.35-28-generic #50-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 Ubuntu 10.10 2.6.35-28-generic #50-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 OpenVMS Alpha 8.3 HP C V7.3-009 HP Fortran V8.2-104679-48H9K HP C++ V7.3-009 Tested Configuration Features Summary ======================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n y y y Windows XP x64 n y(4) n y y y Windows Vista n y(4) n y y y Windows Vista x64 n y(4) n y y y OpenVMS Alpha n y n y y n Mac OS X 10.7 Intel 32-bit n y n y y y Mac OS X 10.7 Intel 64-bit n y n y y y AIX 6.1 32- and 64-bit y y y y y y FreeBSD 8.2-STABLE 32&64 bit n x n x y y CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W y y(2) y y y y CentOS 5.5 Linux 2.6.18-194 i686 Intel W n y n y y n CentOS 5.5 Linux 2.6.18-194 i686 PGI W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y(3) y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W n y n y y y RedHat EL4 2.6.18 Xeon Lustre C y y y y y n Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 n y n y y y SGI Linux 2.6.32.19 y y y y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y Windows XP y y(4) y n Windows XP x64 y y(4) y n Windows Vista y y(4) y y Windows Vista x64 y y(4) y y OpenVMS Alpha n n n n Mac OS X 10.7 Intel 32-bit y(5) n y n Mac OS X 10.7 Intel 64-bit y(5) n y n AIX 6.1 32- and 64-bit n n n y FreeBSD 8.2-STABLE 32&64 bit y x x y CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W y y(2) y y CentOS 5.5 Linux 2.6.18-128 i686 Intel W y y y n CentOS 5.5 Linux 2.6.18-128 i686 PGI W y y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W y y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W y y y n RedHat EL4 2.6.18 Xeon Lustre C y y y n Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 y y y y SGI Linux 2.6.32.19 y y y y (1) Fortran compiled with gfortran. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2008 w/ Intel Fortran 10.1 (Cygwin shared libraries are not supported) (5) C and C++ shared libraries will not be built when Fortran is enabled. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * After the shared library support was fixed for some bugs, it was discovered that "make prefix=XXX install" no longer works for shared libraries. It still works correctly for static libraries. Therefore, if you want to install the HDF5 shared libraries in a location such as /usr/local/hdf5, you need to specify the location via the --prefix option during configure time. E.g, ./configure --prefix=/usr/local/hdf5 ... (AKC - 2011/05/07 HDFFV-7583) * The parallel test, t_shapesame, in testpar/, may run for a long time and may be terminated by the alarm signal. If that happens, one can increase the alarm seconds (default is 1200 seconds = 20 minutes) by setting the environment variable, $HDF5_ALARM_SECONDS, to a larger value such as 3600 (60 minutes). Note that the t_shapesame test may fail in some systems (see the "While working on the 1.8.6 release..." problem below). If it does, it will waste more time if $HDF5_ALARM_SECONDS is set to a larger value. (AKC - 2011/05/07) * The C++ and FORTRAN bindings are not currently working on FreeBSD. (QAK - 2011/04/26) * Shared Fortran libraries are not quite working on AIX. While they are generated when --enable-shared is specified, the fortran and hl/fortran tests fail. We are looking into the issue. HL and C++ shared libraries should now be working as intended, however. (MAM - 2011/04/20) * The --with-mpe configure option does not work with Mpich2. AKC - 2011/03/10 * If parallel gmake (e.g., gmake -j 4) is used, the "gmake clean" command sometimes fails in the perform directory due to the attempt to remove the executable of h5perf or h5perf_serial by two "parallel" commands. This error has no consequence on the functionality of the HDF5 library or install. It is fixed in the next release. AKC - 2011/01/25 * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or file systems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. Please see bug #1813. SLU - 2010/5/5 * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added in. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in 1.8 library. Because there's only one user complaining about it, we (Elena, Quincey, and I) decided to leave it as it is (see bug report #1279). Quincey will make a plan for 1.10. SLU - 2010/2/2 * MinGW has a missing libstdc++.dll.a library file and will not successfully link C++ applications/tests. Do not use the enable-cxx configure option. Read all of the INSTALL_MINGW.txt file for all restrictions. ADB - 2009/11/11 * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not exist. This is due to the MPI_File_open() call failing if the mode has the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11 * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. CMC - 2009/04/28 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect to see this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. * There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * On cobalt, an SGI Altix SMP ia64 system, Intel compiler version 10.1 (which is the default on that system) does not work properly and results in failures during make check (in a static build) and make installcheck (during a shared build). This appears to be a compiler optimization problem. Reducing optimization by setting CFLAGS to -O1 or below resolves the issue. Alternatively, using a newer version of the compiler (11.0) also works as intended. MAM - 2010/06/01 * h5diff will not report enum value differences when one or both of the values is not a valid enumeration value. The source of this bug has been identified and it will be fixed in 1.8.8. DER - 2011/04/27 %%%%1.8.6%%%% HDF5 version 1.8.6 released on Mon Feb 14 10:26:30 CST 2011 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.5 and HDF5 1.8.6, and contains information on the platforms tested and known problems in HDF5-1.8.6. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.6 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.6 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.6 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.6 (current release) versus Release 1.8.5": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.5 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - CMake: Improved CPack packaging, added parallel commands, improved configuration options (better similarity to configure), added more tests, better support for use in external cmake projects. (ADB - 2010/10/07) - The default configuration setting for official releases is --enable-production. For unofficial releases, the default configuration setting has been --disable-production. (AKC - 2010/05/28) Library ------- - Added support for thread safety on Windows using the Windows threads library. Use the HDF5_ENABLE_THREADSAFE option in CMake on a Windows platform to enable this functionality. This is supported on Windows Vista and newer Windows operating systems. (MAM - 2010/09/10) - H5Tset_order and H5Tget_order now support all datatypes. A new byte order, H5T_ORDER_MIXED, has been added specifically for a compound datatype and its derived type. (SLU - 2010/8/23) - Improved performance of metadata I/O by changing the default algorithm to perform I/O from all processes (instead of just process 0) when using parallel I/O drivers. (QAK - 2010/07/19) - Improved performance of I/O on datasets with the same shape, but different rank. (QAK - 2010/07/19) - Improved performance of the chunk cache by avoiding unnecessary b-tree lookups of chunks already in cache. (NAF - 2010/06/15) Parallel Library ---------------- - None Tools ----- - h5diff: Added a new flag: --exclude-path. The specified path to an object will be excluded when comparing two files or two groups. If a group is specified to be excluded, all member objects of that group will be excluded. (JKM - 2010/09/16). - h5ls: Added a new flag: --no-dangling-links. See --help output for details. (JKM - 2010/06/15) - h5ls: Added a new flag --follow-symlinks. See --help output for details. (JKM - 2010/05/25) High-Level APIs --------------- - None F90 API ------- - None C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - Sun C and C++ 5.10 and Sun Fortran 95 8.4. - Mac OS X 10.6.4 with gcc 4.2.1 and gfortran 4.6 Bug Fixes since HDF5-1.8.5 ========================== Configuration ------------- - The default number of MPI processes for testing purposes has been changed from 3 to 6. (AKC - 2010/11/11) - Some tests in tools/h5repack may fail in AIX systems when -q32 mode is used. The error is caused by not requesting enough memory in default. Added "env LDR_CNTRL=MAXDATA=0x20000000@DSA" into the $RUNSERIAL and $RUNPARALLE in the AIX config file so that executables are tested with more memory. (AKC - 2010/11/11) - Removed recognition of the parallel compilers of LAM(hcc) and ChMPIon(cmpicc) since we have no access to these two MPI implementations and cannot verify their correctness. (AKC - 2010/07/14 - Bug 1921) - PHDF5 was changed to use "mpiexec" instead of mpirun as the default MPI applications startup command as defined in the MPI-2 definition, section 4.1. (AKC - 2010/06/11 - Bug 1921) Library ------- - Fixed a bug that caused big endian machines to generate corrupt files when using the scale-offset filter with floating point data or fill values. Note that such datasets will no longer be readable by any by any machine after this patch. (NAF - 2010/02/02 - Bug 2131) - Retrieving a link's name by index in the case where the link is external and the file that the link refers to doesn't exist will now fail gracefully rather than cause a segmentation fault. (MAM - 2010/11/17) - Modified metadata accumulator to better track accumulated dirty metadata in an effort to reduce unnecessary I/O in certain situations and to fix some other corner cases which were prone to error. (MAM - 2010/10/15) - Added a new set of unit tests that are run during 'make check' to verify the behavior of the metadata accumulator. (MAM - 2010/10/15) - Modified library to always cache symbol table information. Libraries from version 1.6.3 and earler have a bug which causes them to require this information for some operations. (NAF - 2010/09/21 - Bug 1864) - Fixed a bug where the library could generate an assertion/core dump when a file that had been created with H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) but didn't have a superblock extension was later reopened. (QAK - 2010/09/16 - Bug 1968) - Fixed a bug that could occur when getting information for a new-style group that was previously opened through a file handle that was later closed. (NAF - 2010/09/15) - Added define check in H5public.h if stdint.h is supported by the C++ compiler. This define is only available on Windows with VS2010 and using CMake to build the library. (ADB - 2010/09/13 - Bug 1938) - When a mandatory filter failed to write data chunks, the dataset couldn't close (bug 1260). The fix releases all resources and closes the dataset but returns a failure. (SLU - 2010/09/08) - H5Eset_current_stack now also closes the error stack set as the default. This is to avoid a potential problem. (SLU - 2010/09/07 - Bug 1799) - Corrected situation where 1-D chunked dataset could get created by an application without calling H5Pset_chunk(). H5Pset_chunk is now required for creating all chunked datasets. (QAK - 2010/09/02) - Fixed many memory issues that valgrind exposed. (QAK - 2010/08/24) - Fixed the bug in the filter's public CAN_APPLY function. The return value should be htri_t not herr_t. (SLU - 2010/08/05 - Bug 1239) - Fixed the STDIO VFD to use fseeko64 instead of fseek64 for 64-bit I/O support. (AKC - 2010/7/30) - Fixed a bug in the direct I/O driver that could render files with certain kinds of unaligned data unreadable or corrupt them. (NAF - 2010/07/28) - valgrind reported an error of copying data to itself when a new attribute is written. Fixed by taking out the memcpy step in the attribute code. (SLU - 2010/07/28 - Bug 1956) - Corrected various issues in the MPI datatype creation code which could cause resource leaks or incorrect behavior (and may improve the performance as well). (QAK - 2010/07/19) - Fixed a bug that could cause file corruption when using non-default sizes of addresses and/or lengths. This bug could also cause uncorrupted files with this property to be unreadable. This bug was introduced in 1.8.5. (NAF - 2010/07/16 - Bug 1951) Parallel Library ---------------- - None Tools ----- - Fixed h5diff to compare member objects and groups recursively when two files or groups are compared. (JKM - 2010/9/16 - Bug 1975) - Fixed h5repack to be able to convert a dataset to COMPACT layout. (JKM - 2010/09/15 - Bug 1896) - Changed h5ls to not interpret special characters in object or attribute names for output. (JKM - 2010/06/28 - Bug 1784) - Revised the order of arguments for h5cc, h5fc, h5c++, h5pcc and h5pfc. CPPFLAGS, CFLAGS, LDFLAGS, and LIBS have been duplicated with an H5BLD_ prefix to put the flags and paths from the hdf5 build in the correct places and allow the script user to add entries in CPPFLAGS, CFLAGS, LDFLAGS, and LIBS that will take precedence over those from the hdf5 build. The user can make these entries persistent by editing CFLAGSBASE, CPPFLAGSBASE, LDFLAGSBASE, and LIBSBASE near the top of the script or temporary by setting HDF5_CFLAGS, HDF5_CPPFLAGS, HDF5_LDFLAGS, or HDF5_LIBS in the environment. The new order of arguments in these scripts is $CLINKER $H5BLD_CPPFLAGS $CPPFLAGS $H5BLD_CFLAGS $CFLAGS $LDFLAGS $clibpath $link_objs $LIBS $link_args $shared_link. (LRK - 2010/10/25 - Bug 1973) F90 API ------ - None C++ API ------ - None High-Level APIs: ------ - None Fortran High-Level APIs: ------ - None Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 6.1 xlc 11.1.0.3 (NCSA BP) xlC 11.1.0.3 xlf 13.1.0.3 mpcc_r 11.1.0.3 mpxlf_r 13.1.0.3 FreeBSD 6.3-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.4.5 20100803 g++ 4.4.5 20100803 gfortran 4.4.5 20100803 FreeBSD 6.3-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.4.5 20100803 g++ 4.4.5 20100803 gfortran 4.4.5 20100803 Linux 2.6.18-194.3.1.el5PAE gcc (GCC) 4.1.2 and 4.4.2 #1 SMP i686 i686 i386 G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) (jam) GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48) and 4.4.2 PGI C, Fortran, C++ 10.4-0 32-bit PGI C, Fortran, C++ 10.6-0 32-bit Intel(R) C Compiler for 32-bit applications, Version 11.1 Intel(R) C++ Compiler for 32-bit applications, Version 11.1 Intel(R) Fortran Compiler for 32-bit applications, Version 11.1 Absoft 32-bit Fortran 95 10.0.7 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 Linux 2.6.18-194.17.1.el5 gcc 4.1.2 and 4.4.2 #1 SMP x86_64 GNU/Linux G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) (amani) tested for both 32- and 64-bit binaries GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-46) and 4.4.2 Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Version 11.1. PGI C, Fortran, C++ Version 9.0-4 for 64-bit target on x86-64 MPICH mpich2-1.3.1 compiled with gcc 4.1.2 and gfortran 4.1.2 SGI ProPack 7 Linux Intel(R) C++ Version 11.1 20100806 2.6.32.19-0.3.1.1982.0.PTF- Intel(R) Fortran Version 11.1 20100806 default #1 SMP SGI MPT 2.01 SGI Altix UV (NCSA ember) SunOS 5.10 32- and 64-bit Sun C 5.9 Sun OS_sparc Patch 124867-16 (linew) Sun Fortran 95 8.3 Sun OS_sparc Patch 127000-13 Sun C++ 5.9 Sun OS_sparc Patch 124863-62 Sun C 5.10 SunOS_sparc Patch 141861-07 Sun Fortran 95 8.4 SunOS_sparc Patch 128231-06 Sun C++ 5.10 SunOS_sparc 128228-11 Intel Xeon Linux 2.6.18- gcc 4.2.4 92.1.10.el5_lustre.1.6.6smp- Intel(R) C++ Version 10.1.017 perfctr #8 SMP Intel(R) Fortran Compiler Version 10.1.017 (NCSA abe) Open MPI 1.3.2 MVAPICH2-1.5.1_pgi-10.8 Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.7 native gcc(4.3.4) compiler and gfortran) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Visual Studio 2010 (cmake) Cygwin(1.7.7 native gcc(4.3.4) compiler and gfortran) Windows Vista Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows Vista x64 Visual Studio 2008 w/ Intel Fortran 10.1 (project files) Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Windows 7 x64 Visual Studio 2008 w/ Intel Fortran 11.1 (cmake) Mac OS X 10.6.3 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 Darwin Kernel Version 10.3.1 GNU Fortran (GCC) 4.5.0 20090910 Intel C, C++ and Fortran compilers 11.1 20100806 Mac OS X 10.6.4 (Intel 32-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 Darwin Kernel Version 10.4.0 GNU Fortran (GCC) 4.6.0 20101106 Intel C, C++ and Fortran compilers 12.0.0 20101110 Mac OS X 10.6.4 (Intel 64-bit) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5659) Darwin Kernel Version 10.6.0 GNU Fortran (GCC) 4.5.0 20090910 Intel C, C++ and Fortran compilers 11.1 20100806 Fedora 12 2.6.32.16-150.fc12.ppc64 #1 SMP ppc64 GNU/Linux gcc (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) GNU Fortran (GCC) 4.4.4 20100630 (Red Hat 4.4.4-10) Debian5.06 2.6.26-2-686 #1 SMP i686 GNU/Linux gcc (Debian 4.3.2-1.1) 4.3.2 GNU Fortran (Debian 4.3.2-1.1) 4.3.2 Debian5.06 2.6.26-2-amd64 #1 SMP x86_64 GNU/Linux gcc (Debian 4.3.2-1.1) 4.3.2 GNU Fortran (Debian 4.3.2-1.1) 4.3.2 Fedora14 2.6.35.6-48.fc14.i686.PAE #1 SMP i686 i686 i386 GNU/Linux gcc (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) GNU Fortran (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) Fedora14 2.6.35.6-48.fc14.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux gcc (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) GNU Fortran (GCC) 4.5.1 20100924 (Red Hat 4.5.1-4) SUSE 11.3 2.6.34.7-0.7-desktop #1 SMP PREEMPT i686 i686 i386 GNU/Linux gcc (SUSE Linux) 4.5.0 20100604 [gcc-4_5-branch revision 160292] GNU Fortran (SUSE Linux) 4.5.0 20100604 [gcc-4_5-branch revision 160292] SUSE 11.3 2.6.34.7-0.7-desktop #1 SMP PREEMPT x86_64 x86_64 x86_64 GNU/Linux gcc (SUSE Linux) 4.5.0 20100604 [gcc-4_5-branch revision 160292] GNU Fortran (SUSE Linux) 4.5.0 20100604 [gcc-4_5-branch revision 160292] Ubuntu 10.10 2.6.35-25-generic #44-Ubuntu SMP i686 GNU/Linux gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 Ubuntu 10.10 2.6.35-25-generic #44-Ubuntu SMP x86_64 GNU/Linux gcc (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 GNU Fortran (Ubuntu/Linaro 4.4.4-14ubuntu5) 4.4.5 OpenVMS Alpha 8.3 HP C V7.3-009 HP Fortran V8.2-104679-48H9K HP C++ V7.3-009 Tested Configuration Features Summary ======================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n y y y Windows XP x64 n y(4) n y y y Windows Vista n y(4) n y y y Windows Vista x64 n y(4) n y y y OpenVMS Alpha n y n y y n Mac OS X 10.6 Intel n y n y y y AIX 6.1 32- and 64-bit y y y y y y FreeBSD 6.3-STABLE 32&64 bit n y n y y y CentOS 5.5 Linux 2.6.18-194 i686 GNU (1)W y y(2) y y y y CentOS 5.5 Linux 2.6.18-194 i686 Intel W n y n y y n CentOS 5.5 Linux 2.6.18-194 i686 PGI W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y(3) y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W n y n y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W n y n y y y RedHat EL4 2.6.18 Xeon Lustre C y y y y y n Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 n y n y y y SGI Linux 2.6.32.19 y y y y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y Windows XP y y(4) y n Windows XP x64 y y(4) y n Windows Vista y y(4) y y Windows Vista x64 y y(4) y y OpenVMS Alpha n n n n Mac OS X 10.6 y(5) n y n AIX 6.1 32- and 64-bit n n n y FreeBSD 6.3-STABLE 32&64 bit y n y y CentOS 5.5 Linux 2.6.18-128 i686 GNU (1)W y y(2) y y CentOS 5.5 Linux 2.6.18-128 i686 Intel W y y y n CentOS 5.5 Linux 2.6.18-128 i686 PGI W y y y n CentOS 5.5 Linux 2.6.16 x86_64 GNU (1) W y y y y CentOS 5.5 Linux 2.6.16 x86_64 Intel W y y y n CentOS 5.5 Linux 2.6.16 x86_64 PGI W y y y n RedHat EL4 2.6.18 Xeon Lustre C y y y n Fedora 12 Linux 2.6.32.16-150.fc12.ppc64 y y y y SGI Linux 2.6.32.19 y y y y (1) Fortran compiled with gfortran. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2008 w/ Intel Fortran 10.1 (Cygwin shared libraries are not supported) (5) C and C++ shared libraries will not be built when Fortran is enabled. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * examples/run-all-ex.sh does not work on Cygwin. (NAF - 2011/02/11) * Parallel test, t_shapesame in testpar, is rather unstable as it continues to have occasional errors in AIX and quite often in NCSA Abe. It is being built but it is not run automatically in the "make check" command. One would have to run it by hand to see if it works in a particular machine. AKC - 2011/01/28 * Although OpenVMS Alpha is supported, there are several problems with the C test suite - getname.c, lheap.c, lheap.c, mtime.c, and stab.c. The test suite for h5diff also fails. These failures are from the tests, not the library. We have fixed these failures. But it's too late to put the fixes into this release. If you install the 1.8.6 library, it should still work despite of these test failures. If you want the working copy without any test failure, you can request it from us. SLU - 2011/01/26 * If parallel gmake (e.g., gmake -j 4) is used, the "gmake clean" command sometimes fails in the perform directory due to the attempt to remove the executable of h5perf or h5perf_serial by two "parallel" commands. This error has no consequence on the functionality of the HDF5 library or install. It is fixed in the next release. AKC - 2011/01/25 * While working on the 1.8.6 release of HDF5, a bug was discovered that can occur when reading from a dataset in parallel shortly after it has been written to collectively. The issue was exposed by a new test in the parallel HDF5 test suite, but had existed before that. We believe the problem lies with certain MPI implementations and/or filesystems. We have provided a pure MPI test program, as well as a standalone HDF5 program, that can be used to determine if this is an issue on your system. They should be run across multiple nodes with a varying number of processes. These programs can be found at: http://www.hdfgroup.org/ftp/HDF5/examples/known_problems/ * The h5diff tool can display garbage values when variable-length strings in a compound type dataset are compared. This also occurs with variable-length string arrays in a compound type dataset. See bug #1989. This will be fixed in the next release. JKM - 2010/11/05 * The AIX --enable-shared setting does not quite work. It can produce a shared library, but there cannot be more than one shared library that is interlinked. This means that the high level APIs will not work which is not very useful. We hope to have a solution in the next release. (AKC - 2010/10/15) * H5Eset_auto can cause a seg fault for a library API call if the application compiles with -DH5_USE_16_API (see bug 1707). It will be fixed in the next release. SLU - 2010/10/5 * The library's test dt_arith.c showed a compiler's rounding problem on Cygwin when converting an unsigned long long to a long double. The library's own conversion works fine. We defined a macro for Cygwin to skip this test until we can solve the problem. Please see bug #1813. SLU - 2010/5/5 * All the VFL drivers aren't backwardly compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. A new parameter was added to the get_eoa and set_eoa callback functions, and a new callback function get_type_map was added. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug in a 1.8 library. This will be fixed in 1.10. SLU - 2010/2/2 * MinGW has a missing libstdc++.dll.a library file and will not successfully link C++ applications/tests. Do not use the enable-cxx configure option. Read all of the INSTALL_MINGW.txt file for all restrictions. ADB - 2009/11/11 * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file does not exist. This is due to the MPI_File_open() call failing if the amode has the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11 * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. CMC - 2009/04/28 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of their sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test. Therefore, it concludes the test has failed when it receives 0 from yod. To skip all the "failing" tests for now, change them as shown below. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message "yod allocation delayed for node recovery." This interferes with test suites that do not expect to see this message. See the "Red Storm" section in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * On an Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use the -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6 on a system using four processors, if more than two processes contribute no I/O and the application asks to do collective I/O, we have found that a simple collective write will sometimes hang. This can be verified with the t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 or later library cannot be read with the v1.6.2 or earlier library when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big-endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or earlier. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. To work around this, set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are any old /tmp/s.pedb.* files around. These are sockets used by the poe command and left behind if the command failed at some point. To resolve this, ask your system administrator to remove the old/tmp/s.pedb.* files, and then ask IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. * On an SGI Altix SMP ia64 system, the Intel compiler version 10.1 (which is the default on that system) does not work properly and results in failures during the make check (in a static build) and the make installcheck (in a shared build). This appears to be a compiler optimization problem. Reducing the optimization by setting CFLAGS to -O1 or below resolves the issue. Using a newer version of the compiler (11.0) avoids the issue. MAM - 2010/06/01 * On solaris systems, when running the examples with the scripts installed in .../share/hdf5_examples, two of the c tests, h5_extlink and h5_elink_unix2win may fail or generate HDF5 errors because the script commands in c/run-c-ex.sh fail to create test directories red, blue, and u2w. Moving the '!' in lines 67, 70, 73 of run-c-ex.sh will fix the problem. For example the script command "if ! test -d red; then" will work on solaris if changed to "if test ! -d red; then". %%%%1.8.5%%%% HDF5 version 1.8.5 released on Fri Jun 4 13:27:31 CDT 2010 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.4 and HDF5 1.8.5, and contains information on the platforms tested and known problems in HDF5-1.8.5. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.5 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.5 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.5 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.5 (current release) versus Release 1.8.4": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.4 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - CMake Early Access: This release adds support for building HDF5 using the CMake system. Initial work has targeted Windows, but other platforms can be used. See the CMake.TXT file for more information. Version 2.8.1 of CMake is required. - Configure now adds appropriate defines for supporting large (64-bit) files on all systems, where supported, by default, instead of only Linux. This large file support is controllable with the --enable-largefile configure option. The Linux-specific --enable-linux-lfs option has been deprecated in favor of this new option. Please note that specifying --disable-large does NOT attempt to "turn off" largefile support if it is natively supported by the compiler, but rather just disables configure from actively trying to add any additional compiler flags. (MAM - 2010/05/05 - Bug # 1772/1434) - Fixed an signal handling mask error in H5detect that might result in SIGBUS or SIGSEGV failures in some platforms such as Linux on Sparc. (AKC - 2010/4/28 - Bug # 1764) - Fixed various "strict aliasing" problems, allowing higher levels of compiler optimization (in particular, allowing '-O3' to work with recent versions of GCC). (QAK - 2010/04/26) - Upgraded versions of autotools used to generate configuration suite. We now use Automake 1.11.1, Autoconf 2.65, and Libtool 2.2.6b. (MAM - 2010/04/15) - Added the xlc-* and mpcc_r-* BASENAME patterns to be recognized as IBM compilers so that the IBM compiler options can be added properly. This allows non-system-default compiler command names (e.g. xlc-m.n.k.l) be recognized. (AKC - 2009/11/26) Library ------- - Performance is substantially improved when extending a dataset with early allocation. (NAF - 2010/03/24 - Bug # 1637) - Added support for filtering densely stored groups. Many of the API functions related to filters have been extended to support dense groups as well as datasets. Pipeline messages can now be stored in a group's object header. (NAF/QAK - 2009/11/3) Parallel Library ---------------- - None Tools ----- - h5dump: Added the new packed bits feature which prints packed bits stored in an integer dataset. (AKC/ADB - 2010/5/7) - h5diff: Fixed incorrect behavior (hang) in parallel mode when specifying invalid options (ex: -v and -q). (JKM - 2010/02/17) - h5diff: Added new flag --no-dangling-links (see --help for details). (JKM - 2010/02/10) - h5diff: Added new flag --follow-symlinks (see --help for details). (JKM - 2010/01/25) - h5diff: Added a fix to correct the display of garbage values when displaying big-endian data on a little-endian machine. (JKM - 2009/11/20) High-Level APIs --------------- - None F90 API ------- - None C++ API ------- - New member functions + Overloaded CommonFG::getObjnameByIdx to take char* for name. + Overloaded CommonFG::getObjTypeByIdx to return type name as a char*. (BMR - 2010/05/10) + Added DataSet::getInMemDataSize() to simplify getting the dataset's data size in memory. (BMR - 2009/07/26) Support for New Platforms, Languages, and Compilers =================================================== - AIX 6.1 has been added. (AKC - 2010/1/4) Bug Fixes since HDF5-1.8.4 ========================== Configuration ------------- - Fixed various "strict aliasing" problems, allowing higher levels of compiler optimization (in particular, allowing '-O3' to work with recent versions of GCC). (QAK - 2010/04/26) Library ------- - Fixed a file corruption bug that could happen when shrinking a compressed dataset. (NAF - 2010/05/20) - Fixed some memory leaks in VL datatype conversion when strings are used as fill values. (MAM - 2010/05/12 - Bug # 1826) - Fixed an H5Rcreate failure when passing in a -1 for the dataspace identifier. (ADB - 2010/4/28) - Fixed a bug when copying objects with NULL references with the H5O_COPY_EXPAND_REFERENCE_FLAG flag set. (NAF - 2010/04/08 - Bug # 1815) - Added a mechanism to the H5I interface to save returned object identifier structures for immediate re-use if needed. This addresses a potential performance issue by delaying the case when the next identifier to be registered has grown so large that it wraps around and needs to be checked to see whether it is available for distribution. (MAM - 2010/03/15 - Bug # 1730) - Files can now be concurrently opened more than once using the core file driver, as long as the backing store is used. (NAF - 2010/03/09) - Added support for H5O_COPY_EXPAND_EXT_LINK_FLAG to H5Ocopy. External links will now be expanded if this flag is set. (NAF - 2010/03/05 - Bug # 1733) - Fixed a bug where the library, when traversing an external link, would reopen the source file if nothing else worked. (NAF - 2010/03/05) - Fixed a bug where fractal heap identifiers for attributes and shared object header messages could be incorrectly encoded in the file for files created on big-endian platforms. Please see http://www.hdfgroup.org/HDF5/release/known_problems if you suspect you have a file with this problem. (QAK - 2010/02/23 - Bug # 1755) - Fixed an intermittent bug in the b-tree code which could be triggered by expanding and shrinking chunked datasets in certain ways. (NAF - 2010/02/16) - H5Tdetect_class said a VL string is a string type. But when it's in a compound type, it said it's a VL type. THis has been fixed to be consistent; it now always returns a string type. (SLU - 2009/12/10 - Bug # 1584) - Allow "child" files from external links to be correctly located when relative to a "parent" file that is opened through a symbolic link. (QAK - 2009/12/01) Parallel Library ---------------- - Parallel mode in AIX will fail some of the testcheck_version.sh tests where it treats "exit(134) the same as if process 0 had received an abort signal. Fixed. (AKC - 2009/11/3) Tools ----- - Fixed h5ls to return exit code 1 (error) when a non-existent file is specified. (JKM - 2010/04/27 - Bug # 1793) - Fixed h5copy failure when copying a dangling link that is specified directly. (JKM - 2010/04/22 - Bug # 1817) - Fixed an h5repack failure that lost attributes from a dataset of reference type. (JKM - 2010/3/25 - Bug # 1726) - Fixed h5repack error that set NULL for object reference values for datasets, groups, or named datatypes. (JKM - 2010/03/19 - Bug # 1814) F90 API ------ - None C++ API ------ - The constructor PropList::PropList(id) was fixed to act properly according to the nature of 'id'. When 'id' is a property class identifier, a new property list will be created. When 'id' is a property list identifier, a copy of the property list will be made. (BMR - 2010/5/9) - The parameters 'size' and 'bufsize' in CommonFG::getLinkval and CommonFG::getComment, respectively, now have default values for the user's convenience. (BMR - 2009/10/23) - NULL pointer accessing was fixed. (BMR - 2009/10/05 - Bug # 1061) - Read/write methods of DataSet and Attribute classes were fixed to handle string correctly. (BMR - 2009/07/26) High-Level APIs: ------ - Fixed a bug in H5DSattach_scale, H5DSis_attached, and H5DSdetach_scale caused by using the H5Tget_native_type function to determine the native type for reading the REFERENCE_LIST attribute. This bug was exposed on Mac PPC. (EIP - 2010/05/22 - Bug # 1851) - Fixed a bug in the H5DSdetach_scale function when 0 bytes were allocated after the last reference to a dimension scale was removed from the list of references in a VL element of the DIMENSION_LIST attribute. Modified the function to comply with the specification: the DIMENSION_LIST attribute is now deleted when no dimension scales are left attached. (EIP - 2010/05/14 - Bug # 1822) Fortran High-Level APIs: ------ - None Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 7.0.0.9, 8.0.0.20, 9.0.0.4 (LLNL Up) xlC 7.0.0.9, 8.0.0.20, 9.0.0.4 xlf 9.1.0.9, 10.1.0.9, 11.1.0.7 mpcc_r 7.0.0.9 mpxlf_r 09.01.0000.0008 AIX 6.1 xlc 10.1.0.6 (NCSA BP) xlC 10.1.0.6 xlf 12.1.0.7 Cray XT3 (2.1.56) cc (pgcc) 10.0-0 (SNL red storm) ftn (pgf90) 10.0-0 CC (pgCC) 10.0-0 FreeBSD 6.3-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.3.4 20090419 g++ 4.3.4 20090419 gfortran 4.3.4 20090419 FreeBSD 6.3-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.4.1 20090421 g++ 4.4.1 20090421 gfortran 4.4.1 20090421 Linux 2.6.18-128.1.6.el5xen gcc (GCC) 4.1.2 20080704 and 4.4.2 #1 SMP i686 i686 i386 GNU Fortran (GCC) 4.1.2 20080704 and 4.4.2 (jam) g++ (GCC) 4.1.2 20080704 and 4.4.2 G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) Absoft 32-bit Fortran 95 10.0.7 PGI C, Fortran, C++ 10.4-0 32-bit Intel(R) C, C++, Fortran Compilers for 32-bit applications, Version 11.1 Build 20090827 MPICH mpich2-1.0.8 compiled with gcc 4.1.2 and GNU Fortran (GCC) 4.1.2 Linux 2.6.18-164.el5 #1 SMP gcc 4.1.2 20080704 and gcc 4.4.2 x86_64 GNU/Linux GNU Fortran (GCC) 4.1.2 20080704 and 4.4.2 (amani) g++ (GCC) 4.1.2 20080704 and 4.4.2 G95 (GCC 4.0.3 (g95 0.93!) Apr 21 2010) Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Version 11.1 Build 20090827. PGI C, Fortran, C++ Version 10.4-0 for 32 & 64-bit target on x86-64 MPICH mpich2-1.0.8 compiled with gcc 4.1.2 and GNU Fortran (GCC) 4.1.2 Linux 2.6.16.54-0.2.5 #1 Intel(R) C++ Version 11.0.074 SGI Altix SMP ia64 Intel(R) Fortran Itanium(R) Version 11.0.074 (cobalt) SGI MPI 1.38 SunOS 5.10 32- and 64-bit Sun C 5.9 SunOS_sparc Patch 124867-14 (linew) Sun Fortran 95 8.3 SunOS_sparc Patch 127000-13 Sun C++ 5.9 SunOS_sparc Patch 124863-23 Intel Xeon Linux 2.6.18- Intel(R) C++ Version 10.0.026 92.1.10.el5_lustre.1.6.6smp- Intel(R) Fortran Compiler Version 10.0.026 perfctr #7 SMP Open MPI 1.2.2 (abe) MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2 compiled with icc v10.0.026 and ifort 10.0.026 Linux 2.6.18-76chaos #1 SMP Intel(R) C, C++, Fortran Compilers for SMP x86_64 GNU/Linux applications running on Intel(R) 64, (SNL Glory) Versions 11.1. Windows XP Visual Studio 2008 w/ Intel Fortran 10.1 Cygwin(1.7.5 native gcc(4.3.4) compiler and gfortran) Windows XP x64 Visual Studio 2008 w/ Intel Fortran 10.1 Windows Vista Visual Studio 2008 w/ Intel Fortran 10.1 Windows Vista x64 Visual Studio 2008 w/ Intel Fortran 10.1 MAC OS 10.6.3 (Intel) i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (pahra) GNU Fortran (GCC) 4.5.0 20090910 i686-apple-darwin10-g++-4.2.1 (GCC) 4.2.1 Intel C, C++ and Fortran compilers 11.1 MAC OS 10.5.8 (Intel) i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (tejeda) MAC OS 10.5 (PPC) powerpc-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (juniper-w) OpenVMS Alpha V8.3 HP C V7.3-009 HP C++ V7.3-009 HP Fortran V8.0-1-104669-48GBT Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n(4) y y y Windows XP x64 n y(4) n(4) y y y Windows Vista n y(4) n(4) y y y Windows Vista x64 n y(4) n(4) y y y Mac OS X 10.5 PPC n n n n y n Mac OS X 10.5 Intel n y n y y y Mac OS X 10.6 Intel n y n y y y AIX 5.3 32- and 64-bit n y n y y n AIX 6.1 32- and 64-bit n y n y y n FreeBSD 6.3-STABLE 32&64 bit n y n y y y RedHat EL4 2.6.9-42 i686 GNU (1) W y y y y y y RedHat EL5 2.6.18-128 i686 GNU (1)W y y(2) y y y y RedHat EL5 2.6.18-128 i686 Intel W n y n y y n RedHat EL5 2.6.18-128 i686 PGI W n y n y y n SuSe Linux 2.6.16 x86_64 GNU (1) W y y(3) y y y y SuSe Linux 2.6.16 x86_64 Intel W n y n y y n SuSe Linux 2.6.16 x86_64 PGI W n y n y y y SuSe Linux 2.6.16 SGI Altix ia64 C y y y y y y RedHat EL4 2.6.18 Xeon Lustre C y y y y y n Cray XT3 2.1.56 y y y y y n OpenVMS Alpha V8.3 n y n y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y Windows XP y y(4) y n Windows XP x64 y y(4) y n Windows Vista y y(4) y n Windows Vista x64 y y(4) y n Mac OS X 10.5 PPC y n n n Mac OS X 10.5 (Intel) y(5) n y n Mac OS X 10.6 (Intel) y(5) n y n AIX 5.3 32- and 64-bit n n n n AIX 6.1 32- and 64-bit n n n n FreeBSD 6.3-STABLE 32&64 bit y n y y RedHat EL4 2.6.9-42 i686 GNU (1) W y y y y RedHat EL5 2.6.18-128 i686 GNU (1)W y y(2) y y RedHat EL5 2.6.18-128 i686 Intel W y y y n RedHat EL5 2.6.18-128 i686 PGI W y y y n SuSe Linux 2.6.16 x86_64 GNU (1) W y y y y SuSe Linux 2.6.16 x86_64 Intel W y y y n SuSe Linux 2.6.16 x86_64 PGI W y y y n SuSe Linux 2.6.16 SGI Altix ia64 C y n RedHat EL4 2.6.18 Xeon Lustre C y y y n Cray XT3 2.1.56 n n n n OpenVMS Alpha V8.3 n n n n (1) Fortran compiled with g95. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2008. (Cygwin shared libraries are not supported.) (5) Shared C and C++ are disabled when Fortran is configured in. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * The library's test dt_arith.c exposed a compiler's rounding problem on Cygwin when converting from unsigned long long to long double. The library's own conversion works correctly. A macro is defined for Cygwin to skip this test until we can solve the problem. (Please see bug #1813.) SLU - 2010/5/5 * All the VFL drivers aren't backward compatible. In H5FDpublic.h, the structure H5FD_class_t changed in 1.8. There is a new parameter added to get_eoa and set_eoa callback functions. A new callback function get_type_map was added. The public function H5FDrealloc was taken out in 1.8. The problem only happens when users define their own driver for 1.6 and try to plug it into a 1.8 library. This affects a very small number of users. (See bug report #1279.) SLU - 2010/2/2 * MinGW has a missing libstdc++.dll.a library file and will not successfully link C++ applications/tests. Do not use the enable-cxx configure option. Read all of the INSTALL_MINGW.txt file for all restrictions. ADB - 2009/11/11 * Some tests in tools/h5repack may fail in AIX systems when -q32 mode is used. The error is due to insufficient memory requested. Request a large amount of runtime memory by setting the following environment variable for more memory. LDR_CNTRL=MAXDATA=0x20000000@DSA AKC - 2009/10/31 * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file is not existing. This is due to the MPI_File_open() call failing if the amode has the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11 * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. CMC - 2009/04/28 * For gcc v4.3 and v4.4, with production mode, if -O3 is used, H5Tinit.c would fail to compile. Actually bad H5Tinit.c is produced. If -O (same as -O1) is used, H5Tinit.c compiled okay but test/dt_arith would fail. When -O0 (no optimizatio) is used, H5Tinit.c compilete okay and all tests passed. Therefore, -O0 is imposed for v4.3 and v4.4 of gcc. AKC - 2009/04/20 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect seeing this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use," but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. * There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * On FREE-BSD systems when shared libraries are disabled, make install fails in install-examples with the error '"Makefile", line 635: Need an operator'. When this error occurs removing or commenting out the line "export LD_LIBRARY_PATH=$(LL_PATH)" (line 635 in examples/Makefile) will allow make install to finish installing examples. The problem will be fixed in the next release. LRK - 2010/05/26 * On cobalt, an SGI Altix SMP ia64 system, Intel compiler version 10.1 (which is the default on that system) does not work properly and results in failures during make check (in a static build) and make installcheck (during a shared build). This appears to be a compiler optimization problem. Reducing optimization by setting CFLAGS to -O1 or below resolves the issue. Alternatively, using a newer version of the compiler (11.0) also works as intended. MAM - 2010/06/01 %%%%1.8.4%%%% HDF5 version 1.8.4 released on Tue Nov 10 15:33:14 CST 2009 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.3 and HDF5 1.8.4, and contains information on the platforms tested and known problems in HDF5-1.8.4 For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.4 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.4 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.4 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.4 (current release) versus Release 1.8.3": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.3 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - Configuration suite now uses Automake 1.11 and Autoconf 2.64. MAM 2009/08/31. - Changed default Gnu fortran compiler from g95 to gfortran since gfortran is more likely installed with gcc now. -AKC 2009/07/19- Library ------- - The embedded library information is displayed by H5check_version() if a version mismatch is detected. Also changed H5check_version() to suppress the warning message totally if $HDF5_DISABLE_VERSION_CHECK is 2 or higher. (Old behavior treated 3 or higher the same as 1, that is print a warning and allows the program to continue. (AKC - 2009/9/28) - If a user does not care for the extra library information insert in the executables, he may turn it off by --disable-embedded-libinfo during configure. (AKC - 2009/9/15) Parallel Library ---------------- - None Tools ----- - h5diff: h5diff treats two INFINITY values different. Fixed by checking (value==expect) before call ABS(...) at h5diff_array.c. This will make that (INF==INF) is true (INF is treated as an number instead of NaN) (PC -- 2009/07/28) - h5diff: add option "--use-system-epsilon" to print difference if (|a-b| > EPSILON). Change default to use strict equality (PC -- 2009/09/12) High-Level APIs --------------- - None F90 API ------- - Added H5Oopen_by_addr_f MSB - 9/14/09 C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== - PathScale compilers are recognized and can build the HDF5 library properly. AKC - 2009/7/28 - Bug Fixes since HDF5-1.8.3 ========================== Configuration ------------- - Removed the following config files, as we no longer support them: config/dec-osf*, config/hpux11.00, config/irix5.x, config/powerpc-ibm-aix4.x config/rs6000-ibm-aix5.x config/unicos* MAM - 2009/10/08 - Modified configure and make process to properly preserve user's CFLAGS (and company) environment variables. Build will now properly use automake's AM_CFLAGS for any compiler flags set by the configure process. Configure will no longer modify CFLAGS directly, nor will setting CFLAGS during make completely replace what configure has set up. MAM - 2009/10/08 - Support for TFLOPS, config/intel-osf1, is removed since the TFLOPS machine has long retired. AKC - 2009/10/06. - Added $(EXEEXT) extension to H5detect when it's executed in the src/Makefile to generate H5Tinit.c so it works correctly on platforms that require the full extension when running executables. MAM - 2009/10/01 - BZ #1613 - Configure will now set FC and CXX to "no" when fortran and c++ are not being compiled, respectively, so configure will not run some of the compiler tests for these languages when they are not being used. MAM - 2009/10/01 - The --enable-static-exec flag will now properly place the -static flag on the link line of all installed executables. This will force the executable to link with static libraries over shared libraries, provided the static libraries are available. MAM - 2009/08/31 - BZ #1583 - The PathScale compiler (v3.2) was mistaken as gcc v4.2.0 but it fails to recognize some gcc options. Fixed. (see bug 1301). AKC - 2009/7/28 - Library ------- - Fixed a bug where writing and deleting many global heap objects (i.e. variable length data) would render the file unreadable. Previously created files exhibiting this problem should now be readable. NAF - 2009/10/27 - 1483 - Fixed error in library's internal caching mechanisms which could cause an assertion failure (and attendent core dump) when encountering an unusually formatted file. (QAK - 2009/10/13) - Fixed incorrect return value for H5Pget_preserve. AKC - 2009/10/08 - 1628 - Fixed an assertion failure that occurred when H5Ocopy was called on a dataset using a vlen inside a compound. NAF - 2009/10/02 - 1597 - Fixed incorrect return value for H5Pget_filter_by_id1/2 in H5Ppublic.h. NAF - 2009/09/25 - 1620 - Fixed a bug where properties weren't being compared with the registered compare callback. NAF - 2009/09/25 - 1555 - Corrected problem where library would re-write the superblock in a file opened for R/W access, even when no changes were made to the file. (QAK - 2009/08/20, Bz#1473) - Fixed a bug where H5Pget_filter_by_id would succeed when called for a filter that wasn't present. NAF - 2009/06/25 - 1250 - Fixed an issue with committed compound datatypes containing a vlen. Also fixed memory leaks involving committed datatypes. NAF - 2009/06/10 - 1593 Parallel Library ---------------- - None Tools ----- - h5dump/h5ls display buffer resize fixed in tools library. ADB - 2009/7/21 - 1520 - perf_serial test added to Windows projects and check batch file. ADB - 2009/06/11 -1504 F90 API ------ - Fixed bug in h5lget_info_by_idx_f by adding missing arguments, consequently changing the API. New API is: SUBROUTINE h5lget_info_by_idx_f(loc_id, group_name, index_field, order, n, & link_type, f_corder_valid, corder, cset, address, val_size, hdferr, lapl_id) MSB - 2009/9/17 - 1652 - Corrected the values for the H5L_flags FORTRAN constants: H5L_LINK_ERROR_F, H5L_LINK_HARD_F, H5L_LINK_SOFT_F, H5L_LINK_EXTERNAL_F MSB - 2009-09-17 - 1653 - Added FORTRAN equivalent of C constant H5T_ORDER_NONE: H5T_ORDER_NONE_F MSB - 2009-9-24 - 1471 C++ API ------ - None High-Level APIs: ------ - Fixed a bug where the H5TB API would forget the order of fields when added out of offset order. NAF - 2009/10/27 - 1582 - H5DSis_attached failed to account for different platform types. Added a get native type call. ADB - 2009/9/29 - 1562 Fortran High-Level APIs: ------ - Lite: the h5ltread_dataset_string_f and h5ltget_attribute_string_f functions had memory problems with the g95 fortran compiler. (PVN � 5/13/2009) 1522 Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 7.0.0.8 (LLNL Up) xlf 09.01.0000.0008 xlC 7.0.0.8 mpcc_r 7.0.0.8 mpxlf_r 09.01.0000.0008 Cray XT3 (2.0.41) cc (pgcc) 7.1-4 (SNL red storm) ftn (pgf90) 7.1-4 CC (pgCC) 7.1-4 FreeBSD 6.3-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.3.5 20091004 g++ 4.3.5 20091004 gfortran 4.3.5 20091004 FreeBSD 6.3-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.4.2 20091006 g++ 4.4.2 20091006 gfortran 4.4.2 20091006 Linux 2.6.18-164.el5 gcc (GCC) 4.1.2 20080704 #1 SMP i686 i686 i386 G95 (GCC 4.0.3 (g95 0.92!) Jun 24 2009) (jam) GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-46) PGI C, Fortran, C++ 8.0-5 32-bit PGI C, Fortran, C++ 8.0-1 32-bit Intel(R) C Compiler for 32-bit applications, Versions 11.0, 11.1 Intel(R) C++ Compiler for 32-bit applications, Version 11.0, 11.1 Intel(R) Fortran Compiler for 32-bit applications, Version 11.0, 11.1 Absoft 32-bit Fortran 95 10.0.7 MPICH mpich2-1.0.8 compiled with gcc (GCC) 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) Linux 2.6.18-164.el5 #1 SMP gcc 4.1.2 20080704 x86_64 GNU/Linux G95 (GCC 4.0.3 (g95 0.92!) Jun 24 2009) (amani) tested for both 32- and 64-bit binaries Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Versions 11.1. PGI C, Fortran, C++ Version 9.0-4 for 64-bit target on x86-64 gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) MPICH mpich2-1.0.8 compiled with gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) GNU Fortran (GCC) 4.1.2 20080704 (Red Hat 4.1.2-46) Linux 2.6.16.60-0.42.5 #1 Intel(R) C++ Version 10.1.017 SGI Altix SMP ia64 Intel(R) Fortran Itanium(R) Version 10.1.017 (cobalt) SGI MPI 1.38 SunOS 5.10 32- and 64-bit Sun C 5.9 SunOS_sparc Patch 124867-11 2009/04/30 (linew) Sun Fortran 95 8.3 SunOS_sparc Patch 127000-11 2009/10/06 Sun C++ 5.9 SunOS_sparc Patch 124863-16 2009/09/15 Intel Xeon Linux 2.6.18- Intel(R) C++ Version 10.0.026 92.1.10.el5_lustre.1.6.6smp- Intel(R) Fortran Compiler Version 10.0.026 perfctr #6 SMP Open MPI 1.2.2 (abe) MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2 compiled with icc v10.0.026 and ifort 10.0.026 IA-64 Linux 2.4.21-309.tg1 gcc (GCC) 3.2.2 #1 SMP ia64 Intel(R) C++ Version 8.1.037 (NCSA tg-login) Intel(R) Fortran Compiler Version 8.1.033 mpich-gm-1.2.7p1..16-intel-8.1.037-r1 Linux 2.6.9-55.0.9.EL_lustre Intel(R) C, C++, Fortran Compilers for .1.4.11.1smp #1 SMP applications running on Intel(R) 64, SMP x86_64 GNU/Linux Versions 10.1. (SNL Thunderbird) Linux 2.6.18-76chaos #1 SMP Intel(R) C, C++, Fortran Compilers for SMP x86_64 GNU/Linux applications running on Intel(R) 64, (SNL Glory) Versions 10.1. Windows XP Visual Studio 2005 w/ Intel Fortran 9.1 Cygwin(native gcc compiler and g95) Windows XP x64 Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista x64 Visual Studio 2005 w/ Intel Fortran 9.1 MAC OS 10.5.6 (Intel) i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 GNU Fortran (GCC) 4.3.0 20070810 G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008) Intel C, C++ and Fortran compilers 10.1 Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y Windows XP n y(4) n(4) y y y Windows XP x64 n y(4) n(4) y y y Windows Vista n n n y y y Mac OS X 10.5 Intel n y n y y y AIX 5.3 32- and 64-bit n y n y y n FreeBSD 6.3-STABLE 32&64 bit n y n y y y RedHat EL5 2.6.18-164 i686 GNU (1)W y y(2) y y y y RedHat EL5 2.6.18-164 i686 Intel W n y n y y n RedHat EL5 2.6.18-164 i686 PGI W n y n y y n RedHat EL5 2.6.18-164 x86_64 GNU(1)W y y(3) y y y y RedHat EL5 2.6.18-164 x86_64 IntelW n y n y y n RedHat EL5 2.6.18-164 x86_64 PGI W n y n y y y SuSe Linux 2.6.16 SGI Altix ia64 C y y y y y y RedHat EL4 2.6.18 Xeon Lustre C y y y y y n SuSe Linux 2.4.21 ia64 Intel C y y y y y n Cray XT3 2.0.62 y y y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y Windows XP y y(4) y y Windows XP x64 y y(4) y y Windows Vista y n n y Mac OS X 10.5 y n y n AIX 5.3 32- and 64-bit n n n n FreeBSD 6.3-STABLE 32&64 bit y y y y RedHat EL5 2.6.18-164 i686 GNU (1)W y y(2) y y RedHat EL5 2.6.18-164 i686 Intel W y y y n RedHat EL5 2.6.18-164 i686 PGI W y y y n RedHat EL5 2.6.18-164 x86_64 GNU(1)W y y y y RedHat EL5 2.6.18-164 x86_64 IntelW y y y n RedHat EL5 2.6.18-164 x86_64 PGI W y y y n SuSe Linux 2.6.16 SGI Altix ia64 C y n RedHat EL4 2.6.18 Xeon Lustre C y y y n SuSe Linux 2.4.21 ia64 Intel C y y y n Cray XT3 2.0.62 n n n n (1) Fortran compiled with g95. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2005 or Cygwin Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * Parallel mode in AIX will fail some of the testcheck_version.sh tests where it treats "exit(134) the same as if process 0 had received an abort signal. This is fixed and will be available in the next release. AKC - 2009/11/3 * Some tests in tools/h5repack may fail in AIX systems when -q32 mode is used. The error is due to insufficient memory requested. Request a large amount of runtime memory by setting the following environment variable for more memory. LDR_CNTRL=MAXDATA=0x20000000@DSA AKC - 2009/10/31 * The PathScale MPI implementation, accessing a Panasas file system, would cause H5Fcreate() with H5F_ACC_EXCL to fail even when the file is not existing. This is due to the MPI_File_open() call failing if the amode has the MPI_MODE_EXCL bit set. (See bug 1468 for details.) AKC - 2009/8/11 * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. CMC - 2009/04/28 * There is a known issue in which HDF5 will change the timestamp on a file simply by opening it with read/write permissions, even if the file is not modified in any way. This is due to the way in which HDF5 manages the file superblock. A fix is currently underway and should be included in the 1.8.4 release of HDF5. MAM - 2009/04/28 * For gcc v4.3 and v4.4, with production mode, if -O3 is used, H5Tinit.c would fail to compile. Actually bad H5Tinit.c is produced. If -O (same as -O1) is used, H5Tinit.c compiled okay but test/dt_arith would fail. When -O0 (no optimizatio) is used, H5Tinit.c compilete okay and all tests passed. Therefore, -O0 is imposed for v4.3 and v4.4 of gcc. AKC - 2009/04/20 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect seeing this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag will only statically link libraries if the static version of that library is present. If only the shared version of a library exists (i.e., most system libraries on Solaris, AIX, and Mac, for example, only have shared versions), the flag should still result in a successful compilation, but note that the installed executables will not be fully static. Thus, the only guarantee on these systems is that the executable is statically linked with just the HDF5 library. * There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. %%%%1.8.3%%%% HDF5 version 1.8.3 released on Mon May 4 09:21:00 CDT 2009 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.2 and HDF5 1.8.3, and contains information on the platforms tested and known problems in HDF5-1.8.3. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.3 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.3 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.3 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.3 (current release) versus Release 1.8.2": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for New Platforms, Languages, and Compilers - Bug Fixes since HDF5-1.8.2 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - Added libtool version numbers to generated c++, fortran, and hl libraries. MAM 2009/04/19. - Regenerated Makefile.ins using Automake 1.10.2. MAM 2009/04/19. - Added a Make target of check-all-install to test the correctness of installing via the prefix= or $DESTDIR options. AKC - 2009/04/14 Library ------- - Embed the content of libhdf5.settings into the hdf5 executables so that an "orphaned" executables can display (via the Unix strings command, for example) the library settings used to build the executables. This is a prototype implementation. Improvement will be added in next release. AKC - 2009/04/20 - Separated "factory" free list class from block free lists. These free lists are dynamically created and manage blocks of a fixed size. H5set_free_list_limits() will use the same settings specified for block free lists for factory free lists. NAF - 2009/04/08 - Added support for dense attributes to H5Ocopy. XCao/NAF - 2009/01/29 - Added H5Pset_elink_cb and H5Pget_elink_cb functions to support a user-defined callback function for external link traversal. NAF - 2009/01/08 - Added H5Pset_elink_acc_flags and H5Pget_elink_acc_flags functions to allow the user to specify the file access flags used to open the target file of an external link. NAF - 2009/01/08 - Added H5Pset_chunk_cache() and H5Pget_chunk_cache() functions to allow individual rdcc configuration for each dataset. Added H5Dget_access_plist() function to retrieve a dataset access property list from a dataset. NAF - 2008/11/12 - Added H5Iis_valid() function to check if an id is valid without producing an error message. NAF - 2008/11/5 - Added code to maintain a min_clean_fraction in the metadata cache when in serial mode. MAM - 2009/01/9 Parallel Library ---------------- - Modified parallel tests to run with arbitrary number of processes. The modified tests are testphdf5 (parallel dataset access), t_chunk_alloc (chunk allocation), and t_posix_compliant (posix compliance). The rest of the parallel tests already use in the code the number of processes available in the communicator. (CMC - 2009/04/28) Tools ----- - h5diff new flag, -c, --compare, list objects that are not comparable. PVN - 2009/4/2 - 1368 - h5diff new flag, -N, --nan, avoids NaNs detection. PVN - 2009/4/2 - h5dump correctly specifies XML dtd / schema urls ADB - 2009/4/3 - 1519 - h5repack now handles group creation order. PVN - 2009/4/2 - 1402 - h5repack: When user doesn't specify a chunk size, h5repack now defines a default chunk size as the same size of the size of the hyperslab used to read the chunks. The size of the hyperslabs are defined as the size of each dimension or a predefined constant, whatever is smaller. This assures that the chunk read fits in the chunk cache. PVN - 2008/11/21 High-Level APIs --------------- - Table: In version 3.0 of Table, the writing of the "NROWS" attribute (used to store number of records) was deprecated. PVN - 2008/11/24 F90 API ------- - Added for the C APIs the Fortran wrappers: h5dget_access_plist_f h5iis_valid_f h5pset_chunk_cache_f h5pget_chunk_cache_f MSB - 2009/04/17 C++ API ------- - None Support for New Platforms, Languages, and Compilers =================================================== Bug Fixes since HDF5-1.8.2 ========================== Configuration ------------- - The --includedir=DIR configuration option now works as intended, and can be used to specify the location to install C header files. The default location remains unchanged, residing at ${prefix}/include. MAM - 2009/03/10 - BZ #1381 - Configure no longer removes the '-g' flag from CFLAGS when in production mode if it has been explicitly set in the CFLAGS environment variable prior to configuration. MAM - 2009/03/09 - BZ #1401 Library ------- - Added versioning to H5Z_class_t struct to allow compatibility with 1.6 API. NAF - 2009/04/20 - 1533 - Fixed a problem with using data transforms with non-native types in the file. NAF - 2009/04/20 - 1548 - Added direct.h include file to windows section of H5private.h to fix _getcwd() warning. ADB - 2009/04/14 - 1536 - Fixed a bug that prevented external links from working after calling H5close(). NAF - 2009/04/10 - 1539 - Modified library to write cached symbol table information to the superblock, to allow library versions 1.3.0 to 1.6.3 to read files created by this version. NAF - 2009/04/08 - 1423 - Changed skip lists to use a deterministic algorithm. The library should now never call rand() or srand(). NAF - 2009/04/08 - 503 - Fixed a bug where H5Lcopy and H5Lmove wouldn't create intermediate groups when that property was set. NAF - 2009/04/07 - 1526 - Fixed a bug that caused files with a user block to grow by the size of the user block every time they were opened. NAF - 2009/03/26 - 1499 - Fixed a rare problem that could occur with files using the old (pre 1.4) array datatype. NAF - 2009/03/23 - Modified library to be able to open files with corrupt root group symbol table messages, and correct these errors if they are found. Such files can only be successfully opened with write access. NAF - 2009/03/23 - 1189 - Removed the long_long #define and replaced all instances with "long long". This caused problems with third party products. All currently supported compliers support the type. ADB - 2009/03/05 - Fixed various bugs that could prevent the fill value from being written in certain rare cases. NAF - 2009/02/26 - 1469 - Fixed a bug that prevented more than one dataset chunk from being cached at a time. NAF - 2009/02/12 - 1015 - Fixed an assertion failure caused by opening an attribute multiple times through multiple file handles. NAF - 2009/02/12 - 1420 - Fixed a problem that could prevent the user from adding attributes (or any object header message) in some circumstances. NAF - 2009/02/12 - 1427 - Fixed a bug that could cause problems when an attribute was added to a committed datatype using the committed datatype's datatype. NAF - 2009/02/12 - Fixed a bug that could cause problems when copying an object with a shared message in its own object header. NAF - 2009/01/29 - Changed H5Tset_order to properly reject H5T_ORDER_NONE for most datatypes. NAF - 2009/01/27 - 1443 - Fixed a bug where H5Tpack wouldn't remove trailing space from an otherwise packed compound type. NAF - 2009/01/14 - Fixed up some old v2 btree assertions that get run in debug mode that were previously failing on compilation, and removed some of the more heavily outdated and non-rewritable ones. MAM - 2008/12/15 - Fixed a bug that could cause problems when "automatically" unmounting multiple files. NAF - 2008/11/17 - H5Dset_extent: when shrinking dimensions, some chunks were not deleted. PVN - 2009/01/8 Parallel Library ---------------- - None Tools ----- - Fixed many problems that could occur when using h5repack with named datatypes. NAF - 2009/4/20 - 1516/1466 - h5dump, h5diff, h5repack were not reading (by hyperslabs) datasets that have a datatype datum size greater than H5TOOLS_BUFSIZE, a constant defined as 1024Kb, such as array types with large dimensions. PVN - 2009/4/1 - 1501 - h5import: By selecting a compression type, a big endian byte order was being selected. PVN - 2009/3/11 - 1462 - zip_perf.c had missing argument on one of the open() calls. Fixed. AKC - 2008/12/9 F90 API ------ - None C++ API ------ - None High-Level APIs: ------ - Dimension scales: The scale index return value in H5DSiterate_scales was not always incremented. PVN - 2009/4/8 - 1538 Fortran High-Level APIs: ------ - Lite: The h5ltget_dataset_info_f function (gets information about a dataset) was not correctly returning the dimension array PVN - 2009/3/23 Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 7.0.0.8 (LLNL Up) xlf 09.01.0000.0008 xlC 7.0.0.8 mpcc_r 7.0.0.8 mpxlf_r 09.01.0000.0008 Cray XT3 (2.0.41) cc (pgcc) 7.1-4 (SNL red storm) ftn (pgf90) 7.1-4 CC (pgCC) 7.1-4 FreeBSD 6.3-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.3.4 20090419 g++ 4.3.4 20090419 gfortran 4.3.4 20090419 FreeBSD 6.3-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.4.1 20090421 g++ 4.4.1 20090421 gfortran 4.4.1 20090421 IRIX64 6.5 (64 & n32) MIPSpro cc 7.4.4m F90 MIPSpro 7.4.4m C++ MIPSpro cc 7.4.4m Linux 2.6.18-128.1.6.el5xen gcc (GCC) 4.1.2 #1 SMP i686 i686 i386 G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009) (jam) PGI C, Fortran, C++ 7.2-1 32-bit PGI C, Fortran, C++ 8.0-1 32-bit Intel(R) C Compiler for 32-bit applications, Versions 10.1, 11.0 Intel(R) C++ Compiler for 32-bit applications, Version 10.1, 11.0 Intel(R) Fortran Compiler for 32-bit applications, Version 10.1, 11.0 Absoft 32-bit Fortran 95 10.0.7 MPICH mpich2-1.0.8 compiled with gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) Linux 2.6.9-42.0.10.ELsmp #1 gcc (GCC) 3.4.6 SMP i686 i686 i386 G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009) (kagiso) MPICH mpich2-1.0.8 compiled with gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.92!) Linux 2.6.16.60-0.37-smp #1 gcc 4.1.2 SMP x86_64 GNU/Linux G95 (GCC 4.0.3 (g95 0.92!) Feb 4 2009) (smirom) Intel(R) C, C++, Fortran Compilers for applications running on Intel(R) 64, Versions 10.1, 11.0. PGI C, Fortran, C++ Version 7.2-1, 8.0-1 for 64-bit target on x86-64 gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) MPICH mpich2-1.0.8 compiled with gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) tested for both 32- and 64-bit binaries Linux 2.6.16.54-0.2.5 #1 Intel(R) C++ Version 10.1.017 SGI Altix SMP ia64 Intel(R) Fortran Itanium(R) Version 10.1.017 (cobalt) SGI MPI 1.38 SunOS 5.10 32- and 64-bit Sun WorkShop 6 update 2 C 5.9 Patch 124867-09 (linew) Sun WorkShop 6 update 2 Fortran 95 8.3 Patch 127000-07 Sun WorkShop 6 update 2 C++ 5.8 Patch 124863-11 Intel Xeon Linux 2.6.18- gcc 3.4.6 20060404 92.1.10.el5_lustre.1.6.6smp- Intel(R) C++ Version 10.0.026 perfctr #2 SMP Intel(R) Fortran Compiler Version 10.0.026 (abe) Open MPI 1.2.2 MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2 compiled with icc v10.0.026 and ifort 10.0.026 IA-64 Linux 2.4.21-309.tg1 gcc (GCC) 3.2.2 #1 SMP ia64 Intel(R) C++ Version 8.1.037 (NCSA tg-login) Intel(R) Fortran Compiler Version 8.1.033 mpich-gm-1.2.7p1..16-intel-8.1.037-r1 Linux 2.6.9-55.0.9.EL_lustre Intel(R) C, C++, Fortran Compilers for .1.4.11.1smp #1 SMP applications running on Intel(R) 64, SMP x86_64 GNU/Linux Versions 9.1. (SNL Spirit) Linux 2.6.9-55.0.9.EL_lustre Intel(R) C, C++, Fortran Compilers for .1.4.11.1smp #1 SMP applications running on Intel(R) 64, SMP x86_64 GNU/Linux Versions 10.1. (SNL Thunderbird) Linux 2.6.18-63chaos #1 SMP Intel(R) C, C++, Fortran Compilers for SMP x86_64 GNU/Linux applications running on Intel(R) 64, (SNL Glory) Versions 10.1. Linux 2.6.18-63chaos #1 SMP Intel(R) C, C++, Fortran Compilers for SMP x86_64 GNU/Linux applications running on Intel(R) 64, (LLNL Zeus) Versions 9.1. gcc/gfortran/g++ (GCC) 4.1.2. Windows XP Visual Studio .NET Visual Studio 2005 w/ Intel Fortran 9.1 Cygwin(native gcc compiler and g95) Windows XP x64 Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista Visual Studio 2005 MAC OS 10.5.6 (Intel) i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 GNU Fortran (GCC) 4.3.0 20070810 G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008) Intel C, C++ and Fortran compilers 10.1 Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y IRIX64_6.5 32-bit n n n n y y IRIX64_6.5 64-bit n y y y y y Windows XP n y(4) n(4) y y y Windows XP x64 n y(4) n(4) y y y Windows Vista n n n y y y Mac OS X 10.5 Intel n y n y y y AIX 5.3 32- and 64-bit n y n y y n FreeBSD 6.3-STABLE 32&64 bit n y n y y y RedHat EL4 2.6.9-42 i686 GNU (1) W y y y y y y RedHat EL5 2.6.18-128 i686 GNU (1)W y y(2) y y y y RedHat EL5 2.6.18-128 i686 Intel W n y n y y n RedHat EL5 2.6.18-128 i686 PGI W n y n y y n SuSe Linux 2.6.16 x86_64 GNU (1) W y y(3) y y y y SuSe Linux 2.6.16 x86_64 Intel W n y n y y n SuSe Linux 2.6.16 x86_64 PGI W n y n y y y SuSe Linux 2.6.16 SGI Altix ia64 C y y y y y y RedHat EL4 2.6.18 Xeon Lustre C y y y y y n SuSe Linux 2.4.21 ia64 Intel C y y y y y n Cray XT3 2.0.41 y y y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y IRIX64_6.5 32-bit y dna y y IRIX64_6.5 64-bit y y n y Windows XP y y(4) y y Windows XP x64 y y(4) y y Windows Vista y n n y Mac OS X 10.5 y n y n AIX 5.3 32- and 64-bit n n n n FreeBSD 6.3-STABLE 32&64 bit y n y y RedHat EL4 2.6.9-42 i686 GNU (1) W y y y y RedHat EL5 2.6.18-128 i686 GNU (1)W y y(2) y y RedHat EL5 2.6.18-128 i686 Intel W y y y n RedHat EL5 2.6.18-128 i686 PGI W y y y n SuSe Linux 2.6.16 x86_64 GNU (1) W y y y y SuSe Linux 2.6.16 x86_64 Intel W y y y n SuSe Linux 2.6.16 x86_64 PGI W y y y n SuSe Linux 2.6.16 SGI Altix ia64 C y n RedHat EL4 2.6.18 Xeon Lustre C y y y n SuSe Linux 2.4.21 ia64 Intel C y y y n Cray XT3 2.0.41 n n n n (1) Fortran compiled with g95. (2) With PGI and Absoft compilers. (3) With PGI compiler for Fortran. (4) Using Visual Studio 2005 or Cygwin Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * Parallel tests failed with 16 processes with data inconsistency at testphdf5 / dataset_readAll. Parallel tests also failed with 32 and 64 processes with collective abort of all ranks at t_posix_compliant / allwrite_allread_blocks with MPI IO. CMC - 2009/04/28 * There is a known issue in which HDF5 will change the timestamp on a file simply by opening it with read/write permissions, even if the file is not modified in any way. This is due to the way in which HDF5 manages the file superblock. A fix is currently underway and should be included in the 1.8.4 release of HDF5. MAM - 2009/04/28 * For gcc v4.3 and v4.4, with production mode, if -O3 is used, H5Tinit.c would fail to compile. Actually bad H5Tinit.c is produced. If -O (same as -O1) is used, H5Tinit.c compiled okay but test/dt_arith would fail. When -O0 (no optimizatio) is used, H5Tinit.c compilete okay and all tests passed. Therefore, -O0 is imposed for v4.3 and v4.4 of gcc. AKC - 2009/04/20 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect seeing this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * We have discovered two problems when running collective IO parallel HDF5 tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a Linux cluster at NCSA. Under some complex selection cases: 1) MPI_Get_element returns the wrong value. 2) MPI_Type_struct also generates the wrong derived datatype and corrupt data may be generated. These issues arise only when turning on collective IO with chunking storage with some complex selections. We have not found these problems on other MPI-IO compilers. If you encounter these problems, you may use independent IO instead. To avoid this behavior, change the following line in your code H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE); to H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT); KY - 2007/08/24 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * For LLNL, uP: both serial and parallel tests pass. Zeus: Serial tests pass but parallel tests fail with a known problem in MPI. ubgl: Serial tests pass but parallel tests fail. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * On IRIX6.5, when the C compiler version is greater than 7.4, complicated MPI derived datatype code will work. However, the user should increase the value of the MPI_TYPE_MAX environment variable to some appropriate value to use collective irregular selection code. For example, the current parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platforms for serial mode. The parallel mode works fine with this option. It is suggested that you do not use this option on these platforms during configuration. * There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * Information about building with PGI and Intel compilers is available in the INSTALL file sections 4.7 and 4.8. %%%%1.8.2%%%% HDF5 version 1.8.2 released on Mon Nov 10 15:43:09 CST 2008 ================================================================================ INTRODUCTION ============ This document describes the differences between HDF5-1.8.1 and HDF5 1.8.2, and contains information on the platforms tested and known problems in HDF5-1.8.2. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.2 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.2 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.2 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.2 (current release) versus Release 1.8.1": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.8.1 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - Upgraded libtool to version 2.2.6a. (MAM - 2008/10/15). Library ------- - Added two new public routines: H5Pget_elink_fapl() and H5Pset_elink_fapl(). (see bug #1247) (VC - 2008/10/13) - Improved free space tracking in file to be faster. (QAK - 2008/10/06) - Added 'mounted' field to H5G_info_t struct. (QAK - 2008/07/15) Parallel Library ---------------- - None Tools ----- - h5repack: added new options -u and -b to add a userblock to an HDF5 file during the repack. (PVN - 2008/08/26) - h5repack: added options -t and -a to call H5Pset_alignment while creating a repacked file. (PVN - 2008/08/29) - h5ls: added capability to traverse through external links when the -r (recursive) flag is given. (NAF - 2008/09/16) - h5ls: added -E option to enable traversal of external links. h5ls will not traverse external links without this flag being set. (NAF - 2008/10/06) - h5dump: when -b flag is used without a keyword after it, binary output defaults to NATIVE. MEMORY keyword was deprecated and replaced by NATIVE keyword. (PVN - 2008/10/30) - h5diff: returns 1 when file graphs differ by any object. Error return code was changed to 2 from -1. (PVN - 2008/10/30) - h5import: TEXTFPE (scientific format) was deprecated. Use TEXTFP instead (PVN - 2008/10/30) F90 API ------ - Added optional parameter 'mounted' to H5Gget_info_f, H5Gget_info_by_idx_f, H5Gget_info_by_name_f (MSB - 2008/09/24) - Added H5Tget_native_type_f (MSB - 2008/09/30) C++ API ------ - These member functions were added as wrapper for H5Rdereference to replace the incorrect IdComponent::dereference(). void H5Object::dereference(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) void H5Object::dereference(H5File& h5file, void* ref, H5R_type_t ref_type=H5R_OBJECT) void H5Object::dereference(Attribute& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) In addition, these constructors were added to create the associated objects by way of dereference: DataSet(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) DataSet(H5File& file, void* ref, H5R_type_t ref_type=H5R_OBJECT) DataSet(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT) Group(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) Group(H5File& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) Group(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT) DataType(H5Object& obj, void* ref, H5R_type_t ref_type=H5R_OBJECT) DataType(H5File& file, void* ref, H5R_type_t ref_type=H5R_OBJECT) DataType(Attribute& attr, void* ref, H5R_type_t ref_type=H5R_OBJECT) (BMR - 2008/10/29) Support for New Platforms, Languages, and Compilers =================================================== - Intel 10.1 is supported on Mac OS X 10.5.4. Note: When Fortran is enabled, configure automatically disables the build of shared libraries (i.e., only static C and C++ HDF5 libraries will be built along with the static HDF5 Fortran library). Intel 10.1 C and C++ compilers require "-no-multibyte-chars" compilation flag due to the known bug in the compilers. (EIP - 2008/10/30) Bug Fixes since HDF5-1.8.1 ========================== Configuration ------------- - Fixed error with 'make check install' failing due to h5dump needing other tools built first. (MAM - 2008/10/15). - When using shared szip, it is no longer necessary to specify the path to the shared szip libraries in LD_LIBRARY_PATH. (MAM - 2008/10/15). - The file libhdf5_fortran.settings is not installed since its content is included in libhdf5.settings now. (AKC - 2008/10/21) - "make DESTDIR=xxx install" failed to install some tools and files (e.g., h5cc and fortran modules). Fixed. (AKC - 2008/10/8). Library ------- - H5Ovisit and H5Ovisit_by_name will now properly terminate when the callback function returns a positive value on the starting object. (NAF - 2008/11/03) - Fixed an error where a null message could be created that was larger than could be written to the file. (NAF - 2008/10/23) - Corrected error with family/split/multi VFD not updating driver info when "latest" version of the file format used. (QAK - 2008/10/14) - Corrected alignment+threshold errors to work correctly when metadata aggregation is enabled. (QAK - 2008/10/06) - Changed H5Fget_obj_count and H5Fget_obj_ids to ignore objects registered by the library for internal library use. (NAF - 2008/10/06) - Fixed potential memory leak during compound conversion. (NAF - 2008/10/06) - Changed the return value of H5Fget_obj_count from INT to SSIZE_T. Also changed the return value of H5Fget_obj_ids from HERR_T to SSIZE_T and the type of the parameter MAX_OBJS from INT to SIZE_T. (SLU - 2008/09/26) - Fixed an issue that could cause data to be improperly overwritten during compound type conversion. (NAF - 2008/09/19) - Fixed pointer alignment violations that could occur during vlen conversion. (NAF - 2008/09/16) - Fixed problem where library could cause a segmentation fault when an invalid location ID was given to H5Giterate(). (QAK - 2008/08/19) - Fixed improper shutdown when objects have reference count > 1. The library now tracks reference count due to the application separately from that due to internal library routines. (NAF - 2008/08/19) - Fixed assertion failure caused by incorrect array datatype version. (NAF - 2008/08/08) - Fixed an issue where mount point traversal would fail when using multiple handles for the child. (NAF - 2008/08/07) - Fixed an issue where mount points were inaccessible when using multiple file handles for the parent. The mount table is now in the shared file structure (the parent pointer is still in the top structure). (NAF - 2008/08/07) - Fixed assertion failure caused by incorrect array datatype version. (NAF - 2008/08/04) - Fixed issue where a group could have a file mounted on it twice. (QAK - 2008/07/15) - When an attribute was opened twice and data was written with one of the handles, the file didn't have the data. It happened because each handle had its own object structure, and the empty one overwrote the data with fill value. This is fixed by making some attribute information like the data be shared in the attribute structure. (SLU - 2008/07/07) - Fixed a Windows-specific issue in the ohdr test which was causing users in some timezones to get false errors. This a deficiency in the Windows mktime() function, and has been handled properly. (SJW - 2008/06/19) Parallel Library ---------------- - None Tools ----- - h5dump now checks for uniqueness of committed datatypes. (NAF - 2008/10/15) - Fixed unnecessary indentation of committed datatypes in h5dump. (NAF - 2008/10/15) - Fixed bugs in h5stat: segmemtation fault when printing groups and print warning message when traversal of objects is unsuccessful. (see bug #1253) (VC- 2008/10/13) - Fixed bug in h5ls that prevented relative group listings (like "h5ls foo.h5/bar") from working correctly (QAK - 2008/06/03) - h5dump: when doing binary output (-b), the stdout printing of attributes was done incorrectly. Removed printing of attributes when doing binary output. (PVN - 2008/06/05) F90 API ------ - h5sselect_elements_f: Added additional operators H5S_SELECT_APPEND and H5S_SELECT_PREPEND (MSB - 2008/09/30) - h5sget_select_elem_pointlist: Fixed list of returned points by rearranging the point list correctly by accounting for C conventions. (MSB - 2008/09/30) - h5sget_select_hyper_blocklist_f: Fixed error in transposed dimension of arrays.(MSB - 2008/9/30) - h5sget_select_bounds_f: Swapped array bounds to account for C and Fortran reversed array notation (MSB - 2008/9/30) - Changed to initializing string to a blank character instead of a null type in tH5P.f90 to fix compiling error using AIX 5.3.0 (MSB - 2008/7/29) - Fixed missing commas in H5test_kind.f90 detected by NAG compiler (MSB - 2008/7/29) - Fixed passing and array to a scalar in tH5A_1_8.f90 detected by NAG compiler (MSB - 2008/7/29) - Added the ability of the test programs to use the status of HDF5_NOCLEANUP to determine if the *.h5 files should be removed or not after the tests are completed (MSB - 2008/10/1) - In nh5tget_offset_c: (MSB 9/12/2008) If offset was equal to 0 it returned the error code of -1, this was changed to return an error code of -1 when the offset value is < 0. - Uses intrinsic Fortran function SIZEOF if available when detecting type of INTEGERs and REALs in H5test_kind.f90 (MSB - 2008/9/3) - Put the DOUBLE PRECISION interfaces in a separate module and added a USE statement for the module. The interfaces are included/excluded depending on the state of FORTRAN_DEFAULT_REAL is DBLE_F which detects if the default REAL is DOUBLE PRECISION. This allows the library to be compiled with -r8 Fortran flag without the user needing to edit the source code. (MSB - 200/8/27) - Enable building shared library for fortran by adding the flag -fPIC to the compile flags for versions of Intel Fortran compiler >=9 (MSB - 2008/8/26) C++ API ------ - Fixed a design bug which allowed an Attribute object to create/modify attributes (bugzilla #1068). The API class hierarchy was revised to address the problem. Classes AbstractDS and Attribute are moved out of H5Object. Class Attribute now multiply inherits from IdComponent and AbstractDs and class DataSet from H5Object and AbstractDs. In addition, the data member IdComponent::id was moved into subclasses: Attribute, DataSet, DataSpace, DataType, H5File, Group, and PropList. (BMR - 2008/05/20) - IdComponent::dereference was incorrect and replaced as described in "New Features" section. (BMR - 2008/10/29) Platforms Tested ================ The following platforms and compilers have been tested for this release. AIX 5.3 xlc 7.0.0.8 xlf 09.01.0000.0008 xlC 7.0.0.8 mpcc_r 7.0.0.8 mpxlf_r 09.01.0000.0008 Cray XT3 (2.0.41) cc (pgcc) 7.1-4 (red storm) ftn (pgf90) 7.1-4 CC (pgCC) 7.1-4 FreeBSD 6.3-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.5 20080702 g++ 4.2.5 20080702 gfortran 4.2.5 20080702 FreeBSD 6.3-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.5 20080702 g++ 4.2.5 20080702 gfortran 4.2.5 20080702 IRIX64 6.5 (64 & n32) MIPSpro cc 7.4.4m F90 MIPSpro 7.4.4m C++ MIPSpro cc 7.4.4m Linux 2.6.9-42.0.10.ELsmp #1 gcc (GCC) 3.4.6 SMP i686 i386 G95 (GCC 4.0.3 (g95 0.92!) April 18 2007) (kagiso) PGI C, Fortran, C++ 7.2-1 32-bit Intel(R) C Compiler for 32-bit applications, Version 10.1 Intel(R) C++ Compiler for 32-bit applications, Version 10.1 Intel(R) Fortran Compiler for 32-bit applications, Version 10.1 Absoft 32-bit Fortran 95 10.0.4 MPICH mpich-1.2.7 compiled with gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.92!) MPICH mpich2-1.0.6p1 compiled with gcc 3.4.6 and G95 (GCC 4.0.3 (g95 0.92!) Linux 2.6.16.46-0.14-smp #1 Intel(R) C++ for Intel(R) EM64T SMP x86_64 GNU/Linux Ver. 10.1.013 (smirom) Intel(R) Fortran Intel(R) EM64T Ver. 10.1.013 PGI C, Fortran, C++ Version 7.2-1 for 64-bit target on x86-64 MPICH mpich-1.2.7 compiled with gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) MPICH mpich2-1.0.7 compiled with gcc 4.1.2 and G95 (GCC 4.0.3 (g95 0.92!) tested for both 32- and 64-bit binaries Linux 2.6.16.54-0.2.5 #1 Intel(R) C++ Version 10.1.017 Altix SMP ia64 Intel(R) Fortran Itanium(R) Version 10.1.017 (cobalt) SGI MPI 1.16 SunOS 5.10 32- and 64-bit Sun WorkShop 6 update 2 C 5.8 (linew) Sun WorkShop 6 update 2 Fortran 95 8.2 Sun WorkShop 6 update 2 C++ 5.8 Patch 121019-06 Xeon Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp (abe) Intel(R) C++ Version 10.0.026 Intel(R) Fortran Compiler Version 10.0.026 Open MPI 1.2.2 MVAPICH2-0.9.8p28p2patched-intel-ofed-1.2 compiled with icc v10.0.026 and ifort 10.0.026 IA-64 Linux 2.4.21-309.tg1 #1 SMP ia64 gcc (GCC) 3.2.2 (NCSA tg-login) Intel(R) C++ Version 8.1.037 Intel(R) Fortran Compiler Version 8.1.033 mpich-gm-1.2.7p1..16-intel-8.1.037-r1 Intel 64 Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp (abe) gcc 3.4.6 20060404 Intel(R) C++ Version 10.0 Intel (R) Fortran Compiler Version 10.0 mvapich2-0.9.8p2patched-intel-ofed-1.2 Windows XP Visual Studio .NET Visual Studio 2005 w/ Intel Fortran 9.1 Cygwin(native gcc compiler and g95) Windows XP x64 Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista Visual Studio 2005 MAC OS 10.5.4 (Intel) i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 GNU Fortran (GCC) 4.3.0 20070810 G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008) Intel C, C++ and Fortran compilers 10.1 Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel Solaris2.10 32-bit n y n y y y Solaris2.10 64-bit n y n y y y IRIX64_6.5 32-bit n n n n y y IRIX64_6.5 64-bit n y y y y y Windows XP n y(15) n(15) y y y Windows XP x64 n y(15) n(15) y y y Windows Vista n n n y y y Mac OS X 10.5 Intel n y n y y y AIX 5.3 32- and 64-bit n y n y y n FreeBSD 6.3-STABLE 32&64 bit n y n y y y RedHat EL4 (3) W y(1) y(10) y(1) y y y RedHat EL4 Intel (3) W n y n y y n RedHat EL4 PGI (3) W n y n y y n SuSe x86_64 gcc(3,12) W y(2) y(11) y(2) y y y SuSe x86_64 Int(3,12) W n y(13) n y y n SuSe x86_64 PGI(3,12) W n y(8) n y y y Linux 2.6 SuSE ia64 C Intel (3,7) y y y y y n Linux 2.6 SGI Altix ia64 Intel (3) y y y y y y Linux 2.6 RHEL C Lustre Intel (5) y(4) y y(4) y y n Cray XT3 2.0.41 y y y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 32-bit y y y y Solaris2.10 64-bit y y y y IRIX64_6.5 32-bit y dna y y IRIX64_6.5 64-bit y y n y Windows XP y y(15) y y Windows XP x64 y y(15) y y Windows Vista y n n y Mac OS X 10.5 y n y n AIX 5.3 32- and 64-bit n n n n FreeBSD 6.2 32&64 bit y n y y RedHat EL4 (3) W y y(10) y y RedHat EL4 Intel (3) W y y y n RedHat EL4 PGI (3) W y y y n SuSe x86_64 GNU(3,12) W y y y y SuSe x86_64 Int(3,12) W y y y n SuSe x86_64 PGI(3,12) W y y y n Linux 2.4 SuSE C ia64 C Intel (7) y y y n Linux 2.4 SGI Altix C ia64 Intel y n Linux 2.6 RHEL C Lustre Intel (5) y y y n Cray XT3 2.0.41 n n n n Notes: (1) Using mpich2 1.0.6. (2) Using mpich2 1.0.7. (3) Linux 2.6 with GNU, Intel, and PGI compilers, as indicated. W or C indicates workstation or cluster, respectively. (4) Using mvapich2 0.9.8. (5) Linux 2.6.9-42.0.10. Xeon cluster with ELsmp_perfctr_lustre and Intel compilers (6) Linux 2.4.21-32.0.1. Xeon cluster with ELsmp_perfctr_lustre and Intel compilers (7) Linux 2.4.21, SuSE_292.till. Ia64 cluster with Intel compilers (8) pgf90 (9) With Compaq Visual Fortran 6.6c compiler. (10) With PGI and Absoft compilers. (11) PGI and Intel compilers for both C and Fortran (12) AMD Opteron x86_64 (13) ifort (14) Yes with C and Fortran, but not with C++ (15) Using Visual Studio 2005 or Cygwin (16) Not tested for this release. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh and tools/h5copy/testh5copy.sh will fail some of its sub-tests. These sub-tests are expected to fail and should exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. Skip all the "failing" test for now by changing them as following. ======== Original tools/h5ls/testh5ls.sh ========= TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Change to =============================== echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ================================================== ======== Original tools/h5copy/testh5copy.sh ========= TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested H5LSTEST $FILEOUT ======== Change to =============================== echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets echo SKIP TOOLTEST_FAIL -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested echo SKIP H5LSTEST $FILEOUT ================================================== AKC - 2008/11/10 * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect seeing this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * We have discovered two problems when running collective IO parallel HDF5 tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a Linux cluster at NCSA. Under some complex selection cases: 1) MPI_Get_element returns the wrong value. 2) MPI_Type_struct also generates the wrong derived datatype and corrupt data may be generated. These issues arise only when turning on collective IO with chunking storage with some complex selections. We have not found these problems on other MPI-IO compilers. If you encounter these problems, you may use independent IO instead. To avoid this behavior, change the following line in your code H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE); to H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT); KY - 2007/08/24 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * For LLNL, uP: both serial and parallel tests pass. Zeus: Serial tests pass but parallel tests fail with a known problem in MPI. ubgl: Serial tests pass but parallel tests fail. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * On IRIX6.5, when the C compiler version is greater than 7.4, complicated MPI derived datatype code will work. However, the user should increase the value of the MPI_TYPE_MAX environment variable to some appropriate value to use collective irregular selection code. For example, the current parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platforms for serial mode. The parallel mode works fine with this option. It is suggested that you do not use this option on these platforms during configuration. * There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * Information about building with PGI and Intel compilers is available in the INSTALL file sections 4.7 and 4.8. %%%%1.8.1%%%% HDF5 version 1.8.1 released on Thu May 29 15:28:55 CDT 2008 ================================================================================ INTRODUCTION ============ This document describes the differences between the HDF5-1.8.1 release and HDF5 1.8.0, and contains information on the platforms tested and known problems in HDF5-1.8.1. For more details, see the files HISTORY-1_0-1_8_0_rc3.txt and HISTORY-1_8.txt in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.1 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.1 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.1 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in the HDF5-1.8.x release series, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.1 (current release) versus Release 1.8.0": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.8.0 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ Configuration ------------- - The lib/libhdf5.settings file contains much more configure information. (AKC - 2008/05/18) - The new configure option "--disable-sharedlib-rpath" disables embedding the '-Wl,-rpath' information into executables when shared libraries are produced, and instead solely relies on the information in LD_LIBRARY_PATH. (MAM - 2008/05/15) - Configuration suite now uses Autoconf 2.61, Automake 1.10.1, and Libtool 2.2.2 (MAM - 2008/05/01) Source code distribution ======================== Library ------- - None Parallel Library ---------------- - None Tools ----- - h5repack: Reinstated the -i and -o command line flags to specify input and output files. h5repack now understands both the old syntax (with -i and -o) and the new syntax introduced in Release 1.8.0. (PVN - 2008/05/23) - h5dump: Added support for external links, displaying the object that an external link points to. (PVN - 2008/05/12) - h5dump: Added an option, -m, to allow user-defined formatting in the output of floating point numbers. (PVN - 2008/05/06) - h5dump, in output of the -p option: Added effective data compression ratio to the dataset storage layout output when a compression filter has been applied to a dataset. (PVN - 2008/05/01) F90 API ------ - New H5A, H5G, H5L, H5O, and H5P APIs to enable 1.8 features were added. See "Release 1.8.1 (current release) versus Release 1.8.0" in the document "HDF5 Software Changes from Release to Release" (http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html) for the complete list of the new APIs. C++ API ------ - None Support for New Platforms, Languages, and Compilers =================================================== - Both serial and parallel HDF5 are supported for the Red Storm machine which is a Cray XT3 system. - The Fortran library will work correctly if compiled with the -i8 flag. This has been tested with the g95, PGI and Intel Fortran compilers. Bug Fixes since HDF5-1.8.0 ========================== Configuration ------------- - None Source code distribution ======================== Library ------- - Chunking: Chunks greater than 4GB are disallowed. (QAK - 2008/05/16) - Fixed the problem with searching for a target file when following an external link. The search pattern will depend on whether the target file's pathname is an absolute or a relative path. Please see the H5Lcreate_external description in the "HDF5 Reference Manual" (http://hdfgroup.org/HDF5/doc/RM/RM_H5L.html). (VC - 2008/04/08) - Fixed possible file corruption bug when encoding datatype descriptions for compound datatypes whose size was between 256 and 511 bytes and the file was opened with the "use the latest format" property enabled (with H5Pset_libver_bounds). (QAK - 2008/03/13) - Fixed bug in H5Aget_num_attrs() routine to correctly handle an invalid location identifier. (QAK - 2008/03/11) Parallel Library ---------------- - None Tools ----- - Fixed bug in h5diff that prevented datasets and attributes with variable-length string elements from comparing correctly. (QAK - 2008/02/28) - Fixed bug in h5dump that caused binary output to be made only for the first dataset, when several datasets were requested. (PVN - 2008/04/07) F90 API ------ - The h5tset(get)_fields subroutines were missing the parameter to specify a sign position; fixed. (EIP - 2008/05/23) - Many APIs were fixed to work with the 8-byte integers in Fortran vs. 4-byte integers in C. This change is trasparent to user applications. C++ API ------ - The class hierarchy was revised to address the problem reported in bugzilla #1068, Attribute should not be derived from base class H5Object. Classes AbstractDS was moved out of H5Object. Class Attribute now multiply inherits from IdComponent and AbstractDs and class DataSet from H5Object and AbstractDs. In addition, data member IdComponent::id was moved into subclasses: Attribute, DataSet, DataSpace, DataType, H5File, Group, and PropList. (BMR - 2008/05/20) - IdComponent::dereference was incorrect; it was changed from: void IdComponent::dereference(IdComponent& obj, void* ref) to: void H5Object::dereference(H5File& h5file, void* ref) void H5Object::dereference(H5Object& obj, void* ref) (BMR - 2008/05/20) - Revised Attribute::write and Attribute::read wrappers to handle memory allocation/deallocation properly. (bugzilla 1045) (BMR - 2008/05/20) Platforms Tested ================ The following platforms and compilers have been tested for this release. Cray XT3 (2.0.41) cc (pgcc) 7.1-4 (red storm) ftn (pgf90) 7.1-4 CC (pgCC) 7.1-4 mpicc 1.0.2 mpif90 1.0.2 FreeBSD 6.2-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.1 20080123 g++ 4.2.1 20080123 gfortran 4.2.1 20070620 FreeBSD 6.2-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.1 20080123 g++ 4.2.1 20080123 gfortran 4.2.1 20080123 IRIX64 6.5 (64 & n32) MIPSpro cc 7.4.4m F90 MIPSpro 7.4.4m C++ MIPSpro cc 7.4.4m Linux 2.6.9 (RHEL4) Intel 10.0 compilers (abe.ncsa.uiuc.edu) Linux 2.4.21-47 gcc 3.2.3 20030502 (osage) Linux 2.6.9-42.0.10 gcc,g++ 3.4.6 20060404, G95 (GCC 4.0.3) (kagiso) PGI 7.1-6 (pgcc, pgf90, pgCC) Intel 9.1 (icc, ifort, icpc) Linux 2.6.16.27 x86_64 AMD gcc 4.1.0 (SuSE Linux), g++ 4.1.0, (smirom) g95 (GCC 4.0.3) PGI 7.1-6 (pgcc, pgf90, pgCC) Intel 9.1 (icc, ifort, icpc) Linux 2.6.5-7.252.1-rtgfx #1 Intel(R) C++ Version 9.0 SMP ia64 Intel(R) Fortran Itanium(R) Version 9.0 (cobalt) SGI MPI SunOS 5.8 32,46 Sun WorkShop 6 update 2 C 5.3 (Solaris 2.8) Sun WorkShop 6 update 2 Fortran 95 6.2 Sun WorkShop 6 update 2 C++ 5.3 SunOS 5.10 cc: Sun C 5.8 (linew) f90: Sun Fortran 95 8.2 CC: Sun C++ 5.8 Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre (tungsten) gcc 3.2.2 20030222 Intel(R) C++ Version 9.0 Intel(R) Fortran Compiler Version 9.0 IA-64 Linux 2.4.21.SuSE_309.tg1 ia64 (NCSA tg-login) gcc 3.2.2 Intel(R) C++ Version 8.1 Intel(R) Fortran Compiler Version 8.1 mpich-gm-1.2.6..14b-intel-r2 Intel 64 Linux 2.6.9-42.0.10.EL_lustre-1.4.10.1smp (abe) gcc 3.4.6 20060404 Intel(R) C++ Version 10.0 Intel (R) Fortran Compiler Version 10.0 mvapich2-0.9.8p2patched-intel-ofed-1.2 Windows XP Visual Studio .NET Visual Studio 2005 w/ Intel Fortran 9.1 Cygwin(native gcc compiler and g95) MinGW(native gcc compiler and g95) Windows XP x64 Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista Visual Studio 2005 MAC OS 10.5.2 (Intel) i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 GNU Fortran (GCC) 4.3.0 20070810 G95 (GCC 4.0.3 (g95 0.91!) Apr 24 2008) Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel SunOS5.10 64-bit n y n y y y SunOS5.10 32-bit n y n y y y IRIX64_6.5 64-bit n y y y y y IRIX64_6.5 32-bit n n n n y y Windows XP n y(15) n(15) y y y Windows XP x64 n y(15) n(15) y y y Windows Vista n n n y y y Mac OS X 10.5 Intel n y n y y y FreeBSD 4.11 n n n y y y RedHat EL3 W (3) y(1) y(10) y(1) y y y RedHat EL3 W Intel (3) n y n y y n RedHat EL3 W PGI (3) n y n y y n SuSe x86_64 gcc (3,12) y(2) y(11) y(2) y y y SuSe x86_64 Int (3,12) n y(13) n y y n SuSe x86_64 PGI (3,12) n y(8) n y y y Linux 2.4 Xeon C Lustre Intel (3,6) n y n y y n Linux 2.6 SuSE ia64 C Intel (3,7) y y y y y n Linux 2.6 SGI Altix ia64 Intel (3) y y y y y y Linux 2.6 RHEL C Lustre Intel (5) y(4) y y(4) y y n Cray XT3 2.0.41 y y y y y n Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.10 64-bit y y y y Solaris2.10 32-bit y y y y IRIX64_6.5 64-bit y y n y IRIX64_6.5 32-bit y dna y y Windows XP y y(15) y y Windows XP x64 y y(15) y y Windows Vista y n n y Mac OS X 10.3 y n FreeBSD 4.11 y n y y RedHat EL3 W (3) y y(10) y y RedHat EL3 W Intel (3) y y y n RedHat EL3 W PGI (3) y y y n SuSe x86_64 W GNU (3,12) y y y y SuSe x86_64 W Int (3,12) y y y n SuSe x86_64 W PGI (3,12) y y y n Linux 2.4 Xeon C Lustre Intel (6) y y y n Linux 2.4 SuSE ia64 C Intel (7) y y y n Linux 2.4 SGI Altix ia64 Intel y n Linux 2.6 RHEL C Lustre Intel (5) y y y n Cray XT3 2.0.41 n n n n n Notes: (1) Using mpich2 1.0.6. (2) Using mpich2 1.0.7. (3) Linux 2.6 with GNU, Intel, and PGI compilers, as indicated. W or C indicates workstation or cluster, respectively. (4) Using mvapich2 0.9.8. (5) Linux 2.6.9-42.0.10. Xeon cluster with ELsmp_perfctr_lustre and Intel compilers (6) Linux 2.4.21-32.0.1. Xeon cluster with ELsmp_perfctr_lustre and Intel compilers (7) Linux 2.4.21, SuSE_292.till. Ia64 cluster with Intel compilers (8) pgf90 (9) With Compaq Visual Fortran 6.6c compiler. (10) With PGI and Absoft compilers. (11) PGI and Intel compilers for both C and Fortran (12) AMD Opteron x86_64 (13) ifort (14) Yes with C and Fortran, but not with C++ (15) Using Visual Studio 2005 or Cygwin (16) Not tested for this release. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * For Red Storm, a Cray XT3 system, the yod command sometimes gives the message, "yod allocation delayed for node recovery". This interferes with test suites that do not expect seeing this message. See the section of "Red Storm" in file INSTALL_parallel for a way to deal with this problem. AKC - 2008/05/28 * For Red Storm, a Cray XT3 system, the tools/h5ls/testh5ls.sh will fail on the test "Testing h5ls -w80 -r -g tgroup.h5" fails. This test is expected to fail and exit with a non-zero code but the yod command does not propagate the exit code of the executables. Yod always returns 0 if it can launch the executable. The test suite shell expects a non-zero for this particular test, therefore it concludes the test has failed when it receives 0 from yod. To bypass this problem for now, change the following lines in the tools/h5ls/testh5ls.sh. ======== Original ========= # The following combination of arguments is expected to return an error message # and return value 1 TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== Skip the test ========= echo SKIP TOOLTEST tgroup-1.ls 1 -w80 -r -g tgroup.h5 ======== end of bypass ======== AKC - 2008/05/28 * We have discovered two problems when running collective IO parallel HDF5 tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a Linux cluster at NCSA. Under some complex selection cases: 1) MPI_Get_element returns the wrong value. 2) MPI_Type_struct also generates the wrong derived datatype and corrupt data may be generated. These issues arise only when turning on collective IO with chunking storage with some complex selections. We have not found these problems on other MPI-IO compilers. If you encounter these problems, you may use independent IO instead. To avoid this behavior, change the following line in your code H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE); to H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT); KY - 2007/08/24 * For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel tests failed with MPI-IO file locking message. AKC - 2007/6/25 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * For LLNL, uP: both serial and parallel tests pass. Zeus: Serial tests pass but parallel tests fail with a known problem in MPI. ubgl: Serial tests pass but parallel tests fail. * Configuring with --enable-debug=all produces compiler errors on most platforms: Users who want to run HDF5 in debug mode should use --enable-debug rather than --enable-debug=all to enable debugging information on most modules. * On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long double to (unsigned) long long and from (unsigned) long long to long double. * On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3 optimization flag. * On VAX, the Scaleoffset filter is not supported. The Scaleoffset filter supports only the IEEE standard for floating-point data; it cannot be applied to HDF5 data generated on VAX. * On Cray X1, a lone colon on the command line of h5dump --xml (as in the testh5dumpxml.sh script) is misinterpereted by the operating system and causes an error. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * On IRIX6.5, when the C compiler version is greater than 7.4, complicated MPI derived datatype code will work. However, the user should increase the value of the MPI_TYPE_MAX environment variable to some appropriate value to use collective irregular selection code. For example, the current parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculation of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD Opteron processor, there is a bug in the compiler for optimization(-O2). The library failed in several tests, all related to the MULTI driver. The problem has been reported to the vendor. * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platforms for serial mode. The parallel mode works fine with this option. It is suggested that you do not use this option on these platforms during configuration. * With the gcc 2.95.2 compiler, HDF5 uses the `-ansi' flag during compilation. The ANSI version of the compiler complains about not being able to handle the `long long' datatype with the warning: warning: ANSI C does not support `long long' This warning is innocuous and can be safely ignored. * The ./dsets tests fail on the TFLOPS machine if the test program, dsets.c, is compiled with the -O option. The HDF5 library still works correctly with the -O option. The test program works fine if it is compiled with -O1 or -O0. Only -O (same as -O2) causes the test program to fail. * Not all platforms behave correctly with Szip's shared libraries. Szip is disabled in these cases, and a message is relayed at configure time. Static libraries should be working on all systems that support Szip and should be used when shared libraries are unavailable. There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * On some platforms that use Intel and Absoft compilers to build the HDF5 Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90 complaining about the exit subroutine. Comment out the line IF (total_error .ne. 0) CALL exit (total_error). * Information about building with PGI and Intel compilers is available in the INSTALL file sections 4.7 and 4.8. * On at least one system, SDSC DataStar, the scheduler (in this case LoadLeveler) sends job status updates to standard error when you run any executable that was compiled with the parallel compilers. This causes problems when running "make check" on parallel builds, as many of the tool tests function by saving the output from test runs, and comparing it to an exemplar. The best solution is to reconfigure the target system so it no longer inserts the extra text. However, this may not be practical. In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to the configure and build. This will cause "make check" to continue after detecting errors in the tool tests. However, in the case of SDSC DataStar, it also leaves you with some 150 "failed" tests to examine by hand. A second solution is to write a script to run serial tests and filter out the text added by the scheduler. A sample script used on SDSC DataStar is given below, but you will probably have to customize it for your installation. Observe that the basic idea is to insert the script as the first item on the command line which executes the the test. The script then executes the test and filters out the offending text before passing it on. #!/bin/csh set STDOUT_FILE=~/bin/serial_filter.stdout set STDERR_FILE=~/bin/serial_filter.stderr rm -f $STDOUT_FILE $STDERR_FILE ($* > $STDOUT_FILE) >& $STDERR_FILE set RETURN_VALUE=$status cat $STDOUT_FILE tail +3 $STDERR_FILE exit $RETURN_VALUE You get the HDF5 make files and test scipts to execute your filter script by setting the environment variable "RUNSERIAL" to the full path of the script prior to running configure for parallel builds. Remember to "unsetenv RUNSERIAL" before running configure for a serial build. Note that the RUNSERIAL environment variable exists so that we can prefix serial runs as necessary on the target system. On DataStar, no prefix is necessary. However on an MPICH system, the prefix might have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to get the serial tests to run at all. In such cases, you will have to include the regular prefix in your filter script. * H5Ocopy() does not copy reg_ref attributes correctly when shared-message is turn on. The value of the reference in the destination attriubte is wrong. This H5Ocopy problem will affect the h5copy tool. * In the C++ API, it appears that there are bugs in Attribute::write/read and DataSet::write/read for fixed- and variable-len strings. The problems are being worked on and a patch will be provided when the fixes are available. %%%%1.8.0%%%% HDF5 version 1.8.0 released on Tue Feb 12 20:41:19 CST 2008 ================================================================================ INTRODUCTION ============ This document describes the differences between the HDF5-1.6.x release series and HDF5 1.8.0, and contains information on the platforms tested and known problems in HDF5-1.8.0. For more details, see the HISTORY-1_0-1_8_0_rc3.txt file in the release_docs/ directory of the HDF5 source. Links to the HDF5 1.8.0 source code, documentation, and additional materials can be found on the HDF5 web page at: http://www.hdfgroup.org/products/hdf5/ The HDF5 1.8.0 release can be obtained from: http://www.hdfgroup.org/HDF5/release/obtain5.html User documentation for 1.8.0 can be accessed directly at this location: http://www.hdfgroup.org/HDF5/doc/ New features in 1.8.0, including brief general descriptions of some new and modified APIs, are described in the "What's New in 1.8.0?" document: http://www.hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html All new and modified APIs are listed in detail in the "HDF5 Software Changes from Release to Release" document, in the section "Release 1.8.0 (current release) versus Release 1.6.x": http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Removed Feature - Support for new platforms and languages - Bug Fixes since HDF5-1.6.0 - Platforms Tested - Supported Configuration Features Summary - Known Problems New Features ============ HDF5 Release 1.8.0 is a major release with many changes and new features. New format and interface features discussed in the "What's New in HDF5 1.8.0" document include the following: Enhanced group object management Enhanced attribute management and more efficient meta data handling Expanded datatype features Creation order tracking and indexing Improved meta data caching and cache control UTF-8 encoding New I/O filters: n-bit and scale+offset compression New link (H5L) and object (H5O) interfaces and features External and user-defined links New high-level APIs: HDF5 Packet Table (H5PT) and HDF5 Dimension Scale (H5DS) C++ and Fortran interfaces for older high-level APIs: H5Lite (H5LT), H5Image (H5IM), and H5Table (H5TB) New and improved tools And more... http://hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html New APIs associated with these features, other interface changes (e.g., ENUM and struct definitions), and new library configuration flags are listed in the "Release 1.8.0 (current release) versus Release 1.6.x" section of "HDF5 Software Changes from Release to Release." http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html Compatibility ------------- Many HDF5 users and user communities have existing applications that they may wish to port to Release 1.8.0. Alternatively, some users may wish to take advantage of Release 1.8.0's improved performance without having to port such applications. To facilitate managing application compatibility and porting applications from release to release, the HDF Team has implemented the following features: Individually-configurable macros that selectively map common interface names to the old and new interfaces Library configuration options to configure the macro mappings Two related documents accompany this release: "API Compatibility Macros in HDF5" discusses the specifics of the new individually-configurable macros and library configuration options. http://hdfgroup.org/HDF5/doc/RM/APICompatMacros.html "New Features in HDF5 Release 1.8.0 and Backward/Forward Format Compatibility Issues" discusses each new feature with regard to its impact on format compatibility. http://hdfgroup.org/HDF5/doc/ADGuide/CompatFormat180.html Referenced documents -------------------- http://hdfgroup.org/HDF5/doc/ADGuide/WhatsNew180.html "What's New in HDF5 1.8.0" http://hdfgroup.org/HDF5/doc/ADGuide/Changes.html The "Release 1.8.0 (current release) versus Release 1.6.x " section in "HDF5 Software Changes from Release to Release" http://hdfgroup.org/HDF5/doc/RM/APICompatMacros.html "API Compatibility Macros in HDF5" http://hdfgroup.org/HDF5/doc/ADGuide/CompatFormat180.html "New Features in HDF5 Release 1.8.0 and Backward/Forward Format Compatibility Issues" Removed Feature =============== The stream virtual file driver (H5FD_STREAM) have been removed in this release. This affects the functions H5Pset_fapl_stream and H5Pget_fapl_stream and the constant H5FD_STREAM. This virtual file driver will be available at http://hdf5-addons.origo.ethz.ch/. Note that at the time of this release, the transition is still in progress; the necessary integration tools may not be available when HDF5 Release 1.8.0 first comes out. Support for New Platforms, Languages, and Compilers =================================================== - Support for Open VMS 7.3 was added. Bug Fixes since HDF5-1.6.0 ========================== This release contains numerous bug fixes. For details, see the "Changes from 1.6.0 to 1.8.0-rc3" section of the HISTORY.txt file for this release. Platforms Tested ================ The following platforms and compilers have been tested for for this release. AIX 5.2 (32/64 bit) xlc 8.0.0.11 xlC 8.0 xlf 10.01.0000.0 mpcc_r 6.0.0.8 mpxlf_r 8.1.1.7 FreeBSD 6.2-STABLE i386 gcc 3.4.6 [FreeBSD] 20060305 (duty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.1 20080123 g++ 4.2.1 20080123 gfortran 4.2.1 20070620 FreeBSD 6.2-STABLE amd64 gcc 3.4.6 [FreeBSD] 20060305 (liberty) g++ 3.4.6 [FreeBSD] 20060305 gcc 4.2.1 20080123 g++ 4.2.1 20080123 gfortran 4.2.1 20080123 IRIX64 6.5 (64 & n32) MIPSpro cc 7.4.4m F90 MIPSpro 7.4.4m C++ MIPSpro cc 7.4.4m Linux 2.6.9 (RHEL4) Intel 10.0 compilers (abe.ncsa.uiuc.edu) Linux 2.4.21-47 gcc 3.2.3 20030502 (osage) Linux 2.6.9-42.0.10 gcc 3.4.6 20060404 (kagiso) PGI 7.0-7 (pgcc, pgf90, pgCC) Intel 9.1 (icc, ifort, icpc) Linux 2.6.16.27 x86_64 AMD gcc 4.1.0 (SuSE Linux), g++ 4.1.0, (smirom) g95 (GCC 4.0.3) PGI 6.2-5 (pgcc, pgf90, pgCC) Intel 9.1 (icc, iort, icpc) Linux 2.6.5-7.252.1-rtgfx #1 Intel(R) C++ Version 9.0 SMP ia64 Intel(R) Fortran Itanium(R) Version 9.0 (cobalt) SGI MPI SunOS 5.8 32,46 Sun WorkShop 6 update 2 C 5.3 (Solaris 2.8) Sun WorkShop 6 update 2 Fortran 95 6.2 Sun WorkShop 6 update 2 C++ 5.3 SunOS 5.10 cc: Sun C 5.8 (linew) f90: Sun Fortran 95 8.2 CC: Sun C++ 5.8 Xeon Linux 2.4.21-32.0.1.ELsmp-perfctr-lustre (tungsten) gcc 3.2.2 20030222 Intel(R) C++ Version 9.0 Intel(R) Fortran Compiler Version 9.0 IA-64 Linux 2.4.21.SuSE_292.til1 ia64 (NCSA tg-login) gcc 3.2.2 Intel(R) C++ Version 8.1 Intel(R) Fortran Compiler Version 8.1 mpich-gm-1.2.5..10-intel-r2 Windows XP Visual Studio .NET Visual Studio 2005 w/ Intel Fortran 9.1 Cygwin(native gcc compiler and g95) MinGW(native gcc compiler and g95) Windows XP x64 Visual Studio 2005 w/ Intel Fortran 9.1 Windows Vista Visual Studio 2005 MAC OS 10.4 (Intel) gcc i686-apple-darwin8-gcc-4.0.1 (GCC) 4.0.1 G95 (GCC 4.0.3 (g95 0.91!) Nov 21 2006) Alpha Open VMS 7.3 Compaq C V6.5-001-48BCD HP Fortran V7.6-3276 Compaq C++ V6.5-004 Supported Configuration Features Summary ======================================== In the tables below y = tested and supported n = not supported or not tested in this release x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90 F90 C++ zlib SZIP parallel parallel SunOS5.8 64-bit n y n y y y SunOS5.8 32-bit n y n y y y SunOS5.10 64-bit y(1) y n y y y SunOS5.10 32-bit y(1) y n y y y IRIX64_6.5 64-bit n y y y y y IRIX64_6.5 32-bit n n n n y y AIX-5.2 32-bit y y y y y y AIX-5.2 64-bit y y y y y y Windows XP n y(15) n(15) y y y Windows XP x64 n y(15) n(15) y y y Windows Vista n n n y y y Mac OS X 10.4 PowerPC n n Mac OS X 10.4 Intel n y n y y y FreeBSD 4.11 n n n y y y RedHat EL3 W (3) y(1a) y(10) y(1a) y y y RedHat EL3 W Intel (3) n y n y y n RedHat EL3 W PGI (3) n y n y y n SuSe x86_64 gcc (3,12) y(1a) y(11) n y y y SuSe x86_64 Int (3,12) n y(13) n y y n SuSe x86_64 PGI (3,12) n y(8) n y y y Linux 2.4 Xeon C Lustre Intel (3,6) n y n y y n Linux 2.6 SuSE ia64 C Intel (3,7) y y y y y n Linux 2.6 SGI Altix ia64 Intel (3) y y y y y y Alpha OpenVMS 7.3.2 n y n y n n Platform Shared Shared Shared static- Thread- C libs F90 libs C++ libs exec safe Solaris2.8 64-bit y y y x y Solaris2.8 32-bit y y y x y Solaris2.10 64-bit y x y Solaris2.10 32-bit y x y IRIX64_6.5 64-bit y y n y y IRIX64_6.5 32-bit y dna y y y AIX-5.2 & 5.3 32-bit n n n y n AIX-5.2 & 5.3 64-bit n n n y n Windows XP y y(15) y y y Windows XP x64 y y(15) y y y Windows Vista y n n y y Mac OS X 10.3 y y n FreeBSD 4.11 y n y y y RedHat EL3 W (3) y y(10) y y y RedHat EL3 W Intel (3) y y y y n RedHat EL3 W PGI (3) y y y y n SuSe x86_64 W GNU (3,12) y y y y y SuSe x86_64 W Int (3,12) y y y y(14) n SuSe x86_64 W PGI (3,12) y y y y(14) n Linux 2.4 Xeon C Lustre Intel (6) y y y y n Linux 2.4 SuSE ia64 C Intel (7) y y y y n Linux 2.4 SGI Altix ia64 Intel y y n Alpha OpenVMS 7.3.2 n n n y n Notes: (1) Using mpich 1.2.6. (1a) Using mpich2 1.0.6. (2) Using mpt and mpich 1.2.6. (3) Linux 2.6 with GNU, Intel, and PGI compilers, as indicated. W or C indicates workstation or cluster, respectively. (6) Linux 2.4.21-32.0.1. Xeon cluster with ELsmp_perfctr_lustre and Intel compilers (7) Linux 2.4.21, SuSE_292.till. Ia64 cluster with Intel compilers (8) pgf90 (9) With Compaq Visual Fortran 6.6c compiler. (10) With PGI and Absoft compilers. (11) PGI and Intel compilers for both C and Fortran (12) AMD Opteron x86_64 (13) ifort (14) Yes with C and Fortran, but not with C++ (15) Using Visual Studio 2005 or Cygwin (16) Not tested for this release. Compiler versions for each platform are listed in the preceding "Platforms Tested" table. Known Problems ============== * We have discovered two problems when running collective IO parallel HDF5 tests with chunking storage on the ChaMPIon MPI compiler on tungsten, a Linux cluster at NCSA. Under some complex selection cases: 1) MPI_Get_element returns the wrong value. 2) MPI_Type_struct also generates the wrong derived datatype and corrupt data may be generated. These issues arise only when turning on collective IO with chunking storage with some complex selections. We have not found these problems on other MPI-IO compilers. If you encounter these problems, you may use independent IO instead. To avoid this behavior, change the following line in your code H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_COLLECTIVE); to H5Pset_dxpl_mpio(xfer_plist, H5FD_MPIO_INDEPENDENT); KY - 2007/08/24 * For SNL, spirit/liberty/thunderbird: The serial tests pass but parallel tests failed with MPI-IO file locking message. AKC - 2007/6/25 * On Intel 64 Linux cluster (RH 4, Linux 2.6.9) with Intel 10.0 compilers, use -mp -O1 compilation flags to build the libraries. A higher level of optimization causes failures in several HDF5 library tests. * For SNL, Red Storm: Only parallel HDF5 is supported. The serial tests pass when run against the parallel library; the parallel tests also pass, but with lots of non-fatal error messages. * For LLNL, uP: both serial and parallel tests pass. Zeus: Serial tests pass but parallel tests fail with a known problem in MPI. ubgl: Serial tests pass but parallel tests fail. * On SUN 5.10 C++, testing fails in the "Testing Shared Datatypes with Attributes" test. * Configuring with --enable-debug=all produces compiler errors on most platforms: Users who want to run HDF5 in debug mode should use --enable-debug rather than --enable-debug=all to enable debugging information on most modules. * On Mac OS 10.4, test/dt_arith.c has some errors in conversion from long double to (unsigned) long long and from (unsigned) long long to long double. * On Altix SGI with Intel 9.0, testmeta.c would not compile with -O3 optimization flag. * On VAX, the Scaleoffset filter is not supported. The filter cannot be applied to HDF5 data generated on VAX. The Scaleoffset filter only supports the IEEE standard for floating-point data. * On Cray X1, a lone colon on the command line of h5dump --xml (as in the testh5dumpxml.sh script) is misinterpereted by the operating system and causes an error. * On mpich 1.2.5 and 1.2.6, if more than two processes contribute no IO and the application asks to do collective IO, we have found that when using 4 processors, a simple collective write will sometimes be hung. This can be verified with t_mpi test under testpar. * On IRIX6.5, when the C compiler version is greater than 7.4, complicated MPI derived datatype code will work. However, the user should increase the value of the MPI_TYPE_MAX environment variable to some appropriate value to use collective irregular selection code. For example, the current parallel HDF5 test needs to raise MPI_TYPE_MAX to 200,000 to pass the test. * A dataset created or rewritten with a v1.6.3 library or after cannot be read with the v1.6.2 library or before when the Fletcher32 EDC filter is enabled. There was a bug in the calculating code of the Fletcher32 checksum in the library before v1.6.3; the checksum value was not consistent between big- endian and little-endian systems. This bug was fixed in Release 1.6.3. However, after fixing the bug, the checksum value was no longer the same as before on little-endian system. Library releases after 1.6.4 can still read datasets created or rewritten with an HDF5 library of v1.6.2 or before. SLU - 2005/6/30 * For version 6 (6.02 and 6.04) of the Portland Group compiler on the AMD Opteron processor, there is a bug in the compiler for optimization(-O2). The library failed in several tests, all related to the MULTI driver. The problem has been reported to the vendor. * On IBM AIX systems, parallel HDF5 mode will fail some tests with error messages like "INFO: 0031-XXX ...". This is from the command `poe'. Set the environment variable MP_INFOLEVEL to 0 to minimize the messages and run the tests again. The tests may fail with messages like "The socket name is already in use", but HDF5 does not use sockets. This failure is due to problems with the poe command trying to set up the debug socket. To resolve this problem, check to see whether there are many old /tmp/s.pedb.* files staying around. These are sockets used by the poe command and left behind due to failed commands. First, ask your system administrator to clean them out. Lastly, request IBM to provide a means to run poe without the debug socket. * The --enable-static-exec configure flag fails to compile for Solaris platforms. This is due to the fact that not all of the system libraries on Solaris are available in a static format. The --enable-static-exec configure flag also fails to correctly compile on IBM SP2 platform for the serial mode. The parallel mode works fine with this option. It is suggested that you do not use this option on these platforms during configuration. * With the gcc 2.95.2 compiler, HDF5 uses the `-ansi' flag during compilation. The ANSI version of the compiler complains about not being able to handle the `long long' datatype with the warning: warning: ANSI C does not support `long long' This warning is innocuous and can be safely ignored. * The ./dsets tests fail on the TFLOPS machine if the test program, dsets.c, is compiled with the -O option. The HDF5 library still works correctly with the -O option. The test program works fine if it is compiled with -O1 or -O0. Only -O (same as -O2) causes the test program to fail. * Not all platforms behave correctly with Szip's shared libraries. Szip is disabled in these cases, and a message is relayed at configure time. Static libraries should be working on all systems that support Szip and should be used when shared libraries are unavailable. There is also a configure error on Altix machines that incorrectly reports when a version of Szip without an encoder is being used. * On some platforms that use Intel and Absoft compilers to build the HDF5 Fortran library, compilation may fail for fortranlib_test.f90, fflush1.f90 and fflush2.f90 complaining about the exit subroutine. Comment out the line IF (total_error .ne. 0) CALL exit (total_error). * Information about building with PGI and Intel compilers is available in the INSTALL file sections 4.7 and 4.8. * On at least one system, SDSC DataStar, the scheduler (in this case LoadLeveler) sends job status updates to standard error when you run any executable that was compiled with the parallel compilers. This causes problems when running "make check" on parallel builds, as many of the tool tests function by saving the output from test runs, and comparing it to an exemplar. The best solution is to reconfigure the target system so it no longer inserts the extra text. However, this may not be practical. In such cases, one solution is to "setenv HDF5_Make_Ignore yes" prior to the configure and build. This will cause "make check" to continue after detecting errors in the tool tests. However, in the case of SDSC DataStar, it also leaves you with some 150 "failed" tests to examine by hand. A second solution is to write a script to run serial tests and filter out the text added by the scheduler. A sample script used on SDSC DataStar is given below, but you will probably have to customize it for your installation. Observe that the basic idea is to insert the script as the first item on the command line which executes the the test. The script then executes the test and filters out the offending text before passing it on. #!/bin/csh set STDOUT_FILE=~/bin/serial_filter.stdout set STDERR_FILE=~/bin/serial_filter.stderr rm -f $STDOUT_FILE $STDERR_FILE ($* > $STDOUT_FILE) >& $STDERR_FILE set RETURN_VALUE=$status cat $STDOUT_FILE tail +3 $STDERR_FILE exit $RETURN_VALUE You get the HDF5 make files and test scipts to execute your filter script by setting the environment variable "RUNSERIAL" to the full path of the script prior to running configure for parallel builds. Remember to "unsetenv RUNSERIAL" before running configure for a serial build. Note that the RUNSERIAL environment variable exists so that we can can prefix serial runs as necessary on the target system. On DataStar, no prefix is necessary. However on an MPICH system, the prefix might have to be set to something like "/usr/local/mpi/bin/mpirun -np 1" to get the serial tests to run at all. In such cases, you will have to include the regular prefix in your filter script. * H5Ocopy() does not copy reg_ref attributes correctly when shared-message is turn on. The value of the reference in the destination attriubte is wrong. This H5Ocopy problem will affect the h5copy tool.