HDF5 version 1.10.9-1 currently under development ================================================================================ INTRODUCTION ============ This document describes the differences between this release and the previous HDF5 release. It contains information on the platforms tested and known problems in this release. For more details check the HISTORY*.txt files in the HDF5 source. Note that documentation in the links below will be updated at the time of each final release. Links to HDF5 documentation can be found on The HDF5 web page: https://portal.hdfgroup.org/display/HDF5/HDF5 The official HDF5 releases can be obtained from: https://www.hdfgroup.org/downloads/hdf5/ Changes from Release to Release and New Features in the HDF5-1.10.x release series can be found at: https://portal.hdfgroup.org/display/HDF5/HDF5+Application+Developer%27s+Guide If you have any questions or comments, please send them to the HDF Help Desk: help@hdfgroup.org CONTENTS ======== - New Features - Support for new platforms and languages - Bug Fixes since HDF5-1.10.8 - Supported Platforms - Tested Configuration Features Summary - More Tested Platforms - Known Problems - CMake vs. Autotools installations New Features ============ Configuration: ------------- - Refactored the utils folder. Added subfolder test and moved the 'swmr_check_compat_vfd.c file' from test into utils/test. Deleted the duplicate swmr_check_compat_vfd.c file in hl/tools/h5watch folder. Also fixed vfd check options. (ADB - 2021/10/18) - Changed autotools and CMake configurations to derive both compilation warnings-as-errors and warnings-only-warn configurations from the same files, 'config/*/*error*'. Removed redundant files 'config/*/*noerror*'. (DCY - 2021/09/29) Library: -------- - Fortran Library: ---------------- - C++ Library: ------------ - Java Library: ------------- - Tools: ------ - High-Level APIs: ---------------- - C Packet Table API: ------------------- - Internal header file: --------------------- - Documentation: -------------- - Support for new platforms, languages and compilers ================================================== - Bug Fixes since HDF5-1.10.7 release =================================== Library ------- - Fixed an issue with collective metadata reads being permanently disabled after a dataset chunk lookup operation. This would usually cause a mismatched MPI_Bcast and MPI_ERR_TRUNCATE issue in the library for simple cases of H5Dcreate() -> H5Dwrite() -> H5Dcreate(). (JTH - 2021/11/08, HDFFV-11090) Java Library ------------ - Configuration ------------- - Tools ----- - Fortran API ----------- - High-Level Library ------------------ - Fixed HL_test_packet, test for packet table vlen of vlen. Incorrect length assignment. (ADB - 2021/10/14) Fortran High-Level APIs ----------------------- - Documentation ------------- - F90 APIs -------- - C++ APIs -------- - Testing ------- - Supported Platforms =================== Linux 3.10.0-1127.10.1.el7 gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) (echidna) GNU Fortran (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39) Linux 2.6.32-754.31.1.el6 IBM XL C/C++ V13.1 #1 SMP ppc64 GNU/Linux IBM XL Fortran V15.1 (ostrich) Linux 3.10.0-327.18.2.el7 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (jelly/kituo/moohan) Version 4.8.5 20150623 (Red Hat 4.8.5-4) Version 4.9.3, Version 5.3.0, Version 6.3.0, Version 7.2.0, Version 8.3.0, Version 9.1.0 Intel(R) C (icc), C++ (icpc), Fortran (icc) compilers: Version 17.0.0.098 Build 20160721 MPICH 3.3 compiled with GCC 7.2.0 OpenMPI 4.0.0 compiled with GCC 7.2.0 SunOS 5.11 11.4.5.12.5.0 Sun C 5.15 SunOS_sparc 2017/05/30 32- and 64-bit Studio 12.6 Fortran 95 8.8 SunOS_sparc 2017/05/30 (hedgehog) Sun C++ 5.15 SunOS_sparc 2017/05/30 Windows 10 x64 Visual Studio 2015 w/ Intel Fortran 18 (cmake) Visual Studio 2017 w/ Intel Fortran 19 (cmake) Visual Studio 2019 w/ Intel Fortran 19 (cmake) Visual Studio 2019 w/ MSMPI 10.1 (cmake) macOS Mojave 10.14.6 Apple LLVM version 10.0.1 (clang-1001.0.46.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (swallow) Intel icc/icpc/ifort version 19.0.4.233 20190416 Tested Configuration Features Summary ===================================== In the tables below y = tested n = not tested in this release C = Cluster W = Workstation x = not working in this release dna = does not apply ( ) = footnote appears below second table = testing incomplete on this feature or platform Platform C F90/ F90 C++ zlib SZIP parallel F2003 parallel Solaris2.11 32-bit n y/y n y y y Solaris2.11 64-bit n y/n n y y y Windows 10 y y/y n y y y Windows 10 x64 y y/y n y y y Mac OS X El Capitan 10.11.6 64-bit n y/y n y y y Mac OS Sierra 10.12.6 64-bit n y/y n y y y Mac OS X High Sierra 10.13.6 64-bit n y/y n y y y Mac OS X Mojave 10.14.6 64-bit n y/y n y y y CentOS 7.2 Linux 2.6.32 x86_64 PGI n y/y n y y y CentOS 7.2 Linux 2.6.32 x86_64 GNU y y/y y y y y CentOS 7.2 Linux 2.6.32 x86_64 Intel n y/y n y y y Linux 2.6.32-573.18.1.el6.ppc64 n y/y n y y y Platform Shared Shared Shared Thread- C libs F90 libs C++ libs safe Solaris2.11 32-bit y y y y Solaris2.11 64-bit y y y y Windows 10 y y y y Windows 10 x64 y y y y Mac OS X El Capitan 10.11.6 64-bit y n y y Mac OS Sierra 10.12.6 64-bit y n y y Mac OS X High Sierra 10.13.6 64-bit y n y y Mac OS X Mojave 10.14.6 64-bit y n y y CentOS 7.2 Linux 2.6.32 x86_64 PGI y y y n CentOS 7.2 Linux 2.6.32 x86_64 GNU y y y y CentOS 7.2 Linux 2.6.32 x86_64 Intel y y y n Linux 2.6.32-573.18.1.el6.ppc64 y y y n Compiler versions for each platform are listed in the preceding "Supported Platforms" table. More Tested Platforms ===================== The following platforms are not supported but have been tested for this release. Linux 2.6.32-573.22.1.el6 GNU C (gcc), Fortran (gfortran), C++ (g++) #1 SMP x86_64 GNU/Linux compilers: (platypus) Version 4.4.7 20120313 Version 4.9.3, 5.3.0, 6.2.0 PGI C, Fortran, C++ for 64-bit target on x86-64; Version 19.10-0 MPICH 3.1.4 compiled with GCC 4.9.3 Linux 2.6.32-754.31.1.el6 gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18) #1 SMP ppc64 GNU/Linux g++ (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18) (ostrich) GNU Fortran (GCC) 4.4.7 20120313 (Red Hat 4.4.7-18) Linux 3.10.0-327.18.2.el7 GNU C (gcc) and C++ (g++) compilers #1 SMP x86_64 GNU/Linux Version 4.8.5 20150623 (Red Hat 4.8.5-4) (jelly) with NAG Fortran Compiler Release 6.1(Tozai) GCC Version 7.1.0 OpenMPI 2.1.6-GCC-7.2.0-2.29, 3.1.3-GCC-7.2.0-2.29 Intel(R) C (icc) and C++ (icpc) compilers Version 17.0.0.098 Build 20160721 with NAG Fortran Compiler Release 6.1(Tozai) Linux 3.10.0-327.10.1.el7 MPICH 3.1.4 compiled with GCC 4.9.3 #1 SMP x86_64 GNU/Linux (moohan) Linux-3.10.0-1127.0.0.1chaos openmpi-4.0.0 #1 SMP x86_64 GNU/Linux clang/3.9.0, 8.0.1 (quartz) gcc/7.3.0, 8.1.0 intel/16.0.4 Linux-4.14.0-115.10.1.1 spectrum-mpi/rolling-release #1 SMP ppc64le GNU/Linux clang/coral-2018.08.08 (lassen) gcc/7.3.1 xl/2019.02.07 Linux-4.12.14-150.52-default cray-mpich/7.7.10 #1 SMP x86_64 GNU/Linux gcc/7.3.0, 8.2.0 (cori) intel/19.0.3 Linux-4.4.180-94.107-default cray-mpich/7.7.6 # 1SMP x86_64 GNU/Linux gcc/7.2.0, 8.2.0 (mutrino) intel/17.0.4, 18.0.2, 19.0.4 Fedora33 5.10.10-200.fc33.x86_64 #1 SMP x86_64 GNU/Linux GNU gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9) GNU Fortran (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9) clang version 11.0.0 (Fedora 11.0.0-2.fc33) (cmake and autotools) Ubuntu20.10 5.8.0-41-generic-x86_64 #46-Ubuntu SMP x86_64 GNU/Linux GNU gcc (GCC) 10.2.0-13ubuntu1 GNU Fortran (GCC) 10.2.0-13ubuntu1 (cmake and autotools) SUSE15sp2 5.3.18-22-default #1 SMP x86_64 GNU/Linux GNU gcc (SUSE Linux) 7.5.0 GNU Fortran (SUSE Linux) 7.5.0 clang version 7.0.1 (tags/RELEASE_701/final 349238) (cmake and autotools) Mac OS X El Capitan 10.11.6 Apple clang version 7.3.0 from Xcode 7.3 64-bit gfortran GNU Fortran (GCC) 5.2.0 (osx1011test) Intel icc/icpc/ifort version 16.0.2 macOS Sierra 10.12.6 Apple LLVM version 9.0.0 (clang-900.39.2) 64-bit gfortran GNU Fortran (GCC) 7.4.0 (kite) Intel icc/icpc/ifort version 17.0.2 macOS High Sierra 10.13.6 Apple LLVM version 10.0.0 (clang-1000.10.44.4) 64-bit gfortran GNU Fortran (GCC) 6.3.0 (bear) Intel icc/icpc/ifort version 19.0.4.233 20190416 SunOS 5.11 11.3 Sun C 5.15 SunOS_sparc 32- and 64-bit Sun Fortran 95 8.8 SunOS_sparc (emu) Known Problems ============== Setting a variable-length dataset fill value will leak the memory allocated for the p field of the hvl_t struct. A fix is in progress for this. HDFFV-10840 CMake files do not behave correctly with paths containing spaces. Do not use spaces in paths because the required escaping for handling spaces results in very complex and fragile build files. ADB - 2019/05/07 At present, metadata cache images may not be generated by parallel applications. Parallel applications can read files with metadata cache images, but since this is a collective operation, a deadlock is possible if one or more processes do not participate. Two tests fail attempting collective writes with OpenMPI 3.0.0/GCC-7.2.0-2.29: testphdf5 (ecdsetw, selnone, cchunk1, cchunk3, cchunk4, and actualio) t_shapesame (sscontig2) CPP ptable test fails on both VS2017 and VS2019 with Intel compiler, JIRA issue: HDFFV-10628. This test will pass with VS2015 with Intel compiler. The subsetting option in ph5diff currently will fail and should be avoided. The subsetting option works correctly in serial h5diff. Known problems in previous releases can be found in the HISTORY*.txt files in the HDF5 source. Please report any new problems found to help@hdfgroup.org. CMake vs. Autotools installations ================================= While both build systems produce similar results, there are differences. Each system produces the same set of folders on linux (only CMake works on standard Windows); bin, include, lib and share. Autotools places the COPYING and RELEASE.txt file in the root folder, CMake places them in the share folder. The bin folder contains the tools and the build scripts. Additionally, CMake creates dynamic versions of the tools with the suffix "-shared". Autotools installs one set of tools depending on the "--enable-shared" configuration option. build scripts ------------- Autotools: h5c++, h5cc, h5fc CMake: h5c++, h5cc, h5hlc++, h5hlcc The include folder holds the header files and the fortran mod files. CMake places the fortran mod files into separate shared and static subfolders, while Autotools places one set of mod files into the include folder. Because CMake produces a tools library, the header files for tools will appear in the include folder. The lib folder contains the library files, and CMake adds the pkgconfig subfolder with the hdf5*.pc files used by the bin/build scripts created by the CMake build. CMake separates the C interface code from the fortran code by creating C-stub libraries for each Fortran library. In addition, only CMake installs the tools library. The names of the szip libraries are different between the build systems. The share folder will have the most differences because CMake builds include a number of CMake specific files for support of CMake's find_package and support for the HDF5 Examples CMake project.